--- /dev/null
+/*****************************************************************
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd. All Rights Reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************/
+
+
+#ifndef __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_H__
+#define __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_H__
+
+#include <stdlib.h>
+#include <stdbool.h>
+#include <tizen.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @addtogroup CAPI_SMARTTHINGS_THING_MASTER_MODULE
+ * @{
+ */
+
+/**
+ * @brief Definition for the max length of SSID for access point.
+ * @since_ses 1
+ */
+#define SMARTTHINGS_SSID_LEN_MAX 32
+
+/**
+ * @brief Definition for the max length of cloud information.
+ * @since_ses 1
+ */
+#define SMARTTHINGS_CLOUD_INFO_LEN_MAX 128
+
+/**
+ * @brief Enumeration for the SmartThings error.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_ERROR_NONE = TIZEN_ERROR_NONE, /**< Successful */
+ SMARTTHINGS_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER, /**< Invalid parameter */
+ SMARTTHINGS_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY, /**< Out of memory */
+ SMARTTHINGS_ERROR_PERMISSION_DENIED = TIZEN_ERROR_PERMISSION_DENIED, /**< Permission denied */
+ SMARTTHINGS_ERROR_NO_DATA = TIZEN_ERROR_NO_DATA, /**< No data */
+ SMARTTHINGS_ERROR_NOT_SUPPORTED = TIZEN_ERROR_NOT_SUPPORTED, /**< Not supported */
+ SMARTTHINGS_ERROR_OPERATION_FAILED = TIZEN_ERROR_UNKNOWN - 1, /**< Operation failed */
+ SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE = TIZEN_ERROR_UNKNOWN -2 /**< Service unavailable */
+} smartthings_error_e;
+
+/**
+ * @brief Enumeration for SmartThings status.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_STATUS_NOT_READY = -1, /**< Service agent is not ready */
+ SMARTTHINGS_STATUS_INIT = 0, /**< Initial state of SmartThings Thing */
+ SMARTTHINGS_STATUS_ES_STARTED, /**< Easy-setup is started */
+ SMARTTHINGS_STATUS_ES_DONE, /**< Easy-setup is done */
+ SMARTTHINGS_STATUS_ES_FAILED_ON_OWNERSHIP_TRANSFER, /**< Easy-setup failed due to Ownership-Transfer failure */
+ SMARTTHINGS_STATUS_CONNECTING_TO_AP, /**< Connecting to target Wi-Fi access point */
+ SMARTTHINGS_STATUS_CONNECTED_TO_AP, /**< Connected to target Wi-Fi access point */
+ SMARTTHINGS_STATUS_CONNECTING_TO_AP_FAILED, /**< Failed to connect to target Wi-Fi access point */
+ SMARTTHINGS_STATUS_REGISTERING_TO_CLOUD, /**< Trying to sign up, sign in and publish resources to cloud */
+ SMARTTHINGS_STATUS_REGISTERED_TO_CLOUD, /**< Publish resources to cloud is complete. Now the thing is ready to be controlled via cloud */
+ SMARTTHINGS_STATUS_REGISTERING_FAILED_ON_SIGN_IN, /**< Failed to sign in to cloud */
+ SMARTTHINGS_STATUS_REGISTERING_FAILED_ON_PUB_RES /**< Failed to publish resources to cloud */
+} smartthings_status_e;
+
+/**
+ * @brief Enumeration for RPC connection status.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_CONNECTION_STATUS_CONNECTED = 0, /**< Connection is connected */
+ SMARTTHINGS_CONNECTION_STATUS_DISCONNECTED, /**< Connection is disconnected */
+ SMARTTHINGS_CONNECTION_STATUS_REJECTED, /**< Connection is rejected */
+} smartthings_connection_status_e;
+
+/**
+ * @brief The Wi-Fi mode.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_WIFI_MODE_11A = (1 << 0), /**< Wi-Fi 11A */
+ SMARTTHINGS_WIFI_MODE_11B = (1 << 1), /**< Wi-Fi 11B */
+ SMARTTHINGS_WIFI_MODE_11G = (1 << 2), /**< Wi-Fi 11G */
+ SMARTTHINGS_WIFI_MODE_11N = (1 << 3), /**< Wi-Fi 11N */
+ SMARTTHINGS_WIFI_MODE_11AC = (1 << 4) /**< Wi-Fi 11AC */
+} smartthings_wifi_mode_e;
+
+/**
+ * @brief The Wi-Fi frequency band.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_WIFI_FREQ_24G = (1 << 0), /**< Wi-Fi 2.4GHz */
+ SMARTTHINGS_WIFI_FREQ_5G = (1 << 1), /**< Wi-Fi 5GHz */
+} smartthings_wifi_freq_e;
+
+/**
+ * @brief The Wi-Fi authentication type of access point.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_WIFI_AUTHTYPE_NONE = 0, /**< No authentication */
+ SMARTTHINGS_WIFI_AUTHTYPE_WEP, /**< WEP */
+ SMARTTHINGS_WIFI_AUTHTYPE_WPA_PSK, /**< WPA-PSK */
+ SMARTTHINGS_WIFI_AUTHTYPE_WPA2_PSK /**< WPA2-PSK */
+} smartthings_wifi_authtype_e;
+
+/**
+ * @brief The Wi-Fi encryption type of access point.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_WIFI_ENCTYPE_NONE = 0, /**< No encryption */
+ SMARTTHINGS_WIFI_ENCTYPE_WEP_64, /**< WEP 64 */
+ SMARTTHINGS_WIFI_ENCTYPE_WEP_128, /**< WEP 128 */
+ SMARTTHINGS_WIFI_ENCTYPE_TKIP, /**< TKIP */
+ SMARTTHINGS_WIFI_ENCTYPE_AES, /**< AES */
+ SMARTTHINGS_WIFI_ENCTYPE_TKIP_AES /**< TKIP/AES */
+} smartthings_wifi_enctype_e;
+
+/**
+ * @brief The SmartThings handle.
+ * @since_ses 1
+ */
+typedef struct smartthings_s *smartthings_h;
+
+/**
+ * @brief The access point information handle.
+ * @since_ses 1
+ */
+typedef struct smartthings_ap_info_s *smartthings_ap_info_h;
+
+/**
+ * @brief The device provisioning information handle.
+ * @since_ses 1
+ */
+typedef struct smartthings_device_prov_info_s *smartthings_device_prov_info_h;
+
+/**
+ * @brief The cloud information handle for cloud sign-up.
+ * @since_ses 1
+ */
+typedef struct smartthings_cloud_info_s *smartthings_cloud_info_h;
+
+/**
+ * @brief The access point list handle.
+ * @since_ses 1
+ */
+typedef struct smartthings_ap_list_s *smartthings_ap_list_h;
+
+/**
+ * @brief Callback for status of connection to SmartThings Thing agent.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks When callback is called, user can see connection status as #smartthings_connection_status_e enumeration value.
+ *
+ * @param[in] result The result of connection operation
+ * @param[in] handle The SmartThings handle
+ * @param[in] status The status of connection
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_initialize()
+ */
+typedef void (*smartthings_connection_status_cb)(smartthings_h handle, smartthings_connection_status_e status, void *user_data);
+
+/**
+ * @brief Callback for SmartThings Thing status.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks When callback is called, user can see SmartThings status as #smartthings_status_e enumeration value.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] status The status of SmartThings
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_status_changed_cb()
+ * @see smartthings_unset_status_changed_cb()
+ */
+typedef void (*smartthings_status_changed_cb)(smartthings_h handle, smartthings_status_e status, void *user_data);
+
+/**
+ * @brief Callback for getting user's input regarding mutual verification.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks When callback is called, user can send a confirmation for mutual verification as true or false.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_user_confirm_cb()
+ * @see smartthings_unset_user_confirm_cb()
+ */
+typedef void (*smartthings_user_confirm_cb)(smartthings_h handle, void *user_data);
+
+/**
+ * @brief Callback for getting user's opinion regarding device reset.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks When callback is called, user can sends a confirmation for reset as true or false.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_reset_confirm_cb()
+ * @see smartthings_unset_reset_confirm_cb()
+ */
+typedef void (*smartthings_reset_confirm_cb)(smartthings_h handle, void *user_data);
+
+/**
+ * @brief Callback for result of reset operation.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks When callback is called, user can check reset operation succeeds or fails.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] result The result of reset
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_reset_result_cb()
+ * @see smartthings_unset_reset_result_cb()
+ */
+typedef void (*smartthings_reset_result_cb)(smartthings_h handle, bool result, void *user_data);
+
+/**
+ * @brief Callback for carrying the randomly generated PIN information.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks The @a pin can be used only in the callback. To use outside, make a copy.
+ * @remarks When callback is called, user can see PIN value and length.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] pin The PIN data in string format
+ * @param[in] size The PIN length of @a pin
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_pin_cb()
+ * @see smartthings_unset_pin_cb()
+ */
+typedef void (*smartthings_pin_generated_cb)(smartthings_h handle, const char* pin, size_t size, void *user_data);
+
+/**
+ * @brief Callback for informing the application to close the PIN display.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks When callback is called, user can know PIN based ownership transfer is finished.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_pin_cb()
+ * @see smartthings_unset_pin_cb()
+ */
+typedef void (*smartthings_pin_display_close_cb)(smartthings_h handle, void *user_data);
+
+/**
+ * @brief Callback for informing Wi-Fi AP information to connect.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks The @a ap_info_h should not be released.
+ * @remarks The @a ap_info_h will be released when smartthings_unset_wifi_ap_provisioning_cb() is called.
+ * @remarks When callback is called, user can get Wi-Fi provisioning information.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] ap_info_h The AP information handle
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_wifi_ap_provisioning_cb()
+ * @see smartthings_unset_wifi_ap_provisioning_cb()
+ */
+typedef void (*smartthings_wifi_ap_provisioning_cb)(smartthings_h handle, smartthings_ap_info_h ap_info_h, void *user_data);
+
+/**
+ * @brief Callback for informing device provisioning information.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks The @a dev_prov_h should not be released.
+ * @remarks The @a dev_prov_h will be released when smartthings_unset_device_provisioning_cb() is called.
+ * @remarks When callback is called, user can get device provisioning information.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] dev_prov_h The device provisioning information handle
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_device_provisioning_cb()
+ * @see smartthings_unset_device_provisioning_cb()
+ */
+typedef void (*smartthings_device_provisioning_cb)(smartthings_h handle, smartthings_device_prov_info_h dev_prov_h, void *user_data);
+
+/**
+ * @brief Callback for informing the scan AP list request.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks When callback is called, user scans access points, sets AP list and sends it to agent.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] req_id The request ID
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_scan_ap_cb()
+ * @see smartthings_unset_scan_ap_cb()
+ */
+typedef void (*smartthings_scan_ap_cb)(smartthings_h handle, int req_id, void *user_data);
+
+/**
+ * @brief Callback for informing the stop soft AP request.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks When callback is called, user stops soft AP.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_set_stop_soft_ap_cb()
+ * @see smartthings_unset_stop_soft_ap_cb()
+ */
+typedef void (*smartthings_stop_soft_ap_cb)(smartthings_h handle, void *user_data);
+
+/**
+ * @brief Creates a handle and connects to agent.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks The @a handle must be released using smartthings_deinitialize().
+ * @remarks Ths function returns #SMARTTHINGS_ERROR_PERMISSION_DENIED\n
+ * if the application has no app-defined privilege for 'http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master'.
+ *
+ * @param[out] handle The SmartThings handle to be newly created on success
+ * @param[in] connection_status_cb The RPC connection status callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_NOT_SUPPORTED Not supported
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_deinitialize()
+ */
+int smartthings_initialize(smartthings_h *handle,
+ smartthings_connection_status_cb connection_status_cb,
+ void *user_data);
+
+/**
+ * @brief Deinitializes a handle and disconnects from the agent.
+ * @since_ses 1
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ *
+ * @see smartthings_initialize()
+ */
+int smartthings_deinitialize(smartthings_h handle);
+
+/**
+ * @brief Starts SmartThings Thing operation.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_stop()
+ */
+int smartthings_start(smartthings_h handle);
+
+/**
+ * @brief Stops SmartThings Thing operation.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_start()
+ */
+int smartthings_stop(smartthings_h handle);
+
+/**
+ * @brief Sets thing status changed callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks Only one callback function can be set with this function.
+ * @remarks If multiple callbacks are set, the last one is registered only.
+ * @remarks Callback is called when SmartThings status is changed.
+ * @remarks When callback is called, user can get SmartThings status as #smartthings_status_e enumeration value.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] status_cb The status changed callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_unset_status_changed_cb()
+ */
+int smartthings_set_status_changed_cb(smartthings_h handle,
+ smartthings_status_changed_cb status_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets thing status changed callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_status_changed_cb()
+ */
+int smartthings_unset_status_changed_cb(smartthings_h handle);
+
+/**
+ * @brief Sets test certificate files.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks These files should be placed in 'res' directory of application.
+ * @remarks This function is needed only for using test certificate.
+ * @remarks This function can be used before smartthings_start()
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] certificate The certificate file
+ * @param[in] private_key The private key file
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ */
+int smartthings_set_certificate_file(smartthings_h handle, const char *certificate, const char *private_key);
+
+/**
+ * @brief Sets device property for Easy-setup.
+ * @since_ses 1
+ *
+ * @remarks This function can be used before smartthings_start()
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] dev_name The device name
+ * @param[in] wifi_mode The supported Wi-Fi mode (bit masked value for #smartthings_wifi_mode_e)
+ * @param[in] wifi_freq The supported Wi-Fi frequency (bit masked value for #smartthings_wifi_freq_e)
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_set_device_property(smartthings_h handle, const char* dev_name, int wifi_mode, int wifi_freq);
+
+/**
+ * @brief Gets a device ID.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks The @a device_id should be released using free().
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[out] device_id The device ID
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ */
+int smartthings_get_device_id(smartthings_h handle, char **device_id);
+
+/**
+ * @brief Gets a Easy-setup status.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[out] is_completed The status of Easy-setup whether it is completed or not
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ */
+int smartthings_get_easysetup_status(smartthings_h handle, bool *is_completed);
+
+/**
+ * @brief Starts Easy-setup mode.
+ *
+ * @details This function requests for turning on soft AP to SmartThings Thing agent.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing \n
+ * %http://tizen.org/privilege/softap
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_stop_easysetup()
+ */
+int smartthings_start_easysetup(smartthings_h handle);
+
+/**
+ * @brief Stops Easy-setup mode.
+ *
+ * @details This function requests for turning off soft AP to SmartThings Thing agent.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing \n
+ * %http://tizen.org/privilege/softap
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_start_easysetup()
+ */
+int smartthings_stop_easysetup(smartthings_h handle);
+
+/**
+ * @brief Sets callback for getting user confirmation for mutual verification based just work ownership transfer.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks Only one callback function can be set with this function.
+ * @remarks If multiple callbacks are set, the last one is registered only.
+ * @remarks Callback is called when it needs user's confirm for mutual verification based just work ownership transfer.
+ * @remarks When callback is called, user can send a confirmation for mutual verification based just work ownership transfer as true or false.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] confirm_cb The user confirm callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_unset_user_confirm_cb()
+ */
+int smartthings_set_user_confirm_cb(smartthings_h handle,
+ smartthings_user_confirm_cb confirm_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets user confirmation callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_user_confirm_cb()
+ */
+int smartthings_unset_user_confirm_cb(smartthings_h handle);
+
+/**
+ * @brief Sets reset confirmation callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks Only one callback function can be set with this function.
+ * @remarks If multiple callbacks are set, the last one is registered only.
+ * @remarks Callback is called when it needs user's confirm for reset.
+ * @remarks When callback is called, user can send a confirmation for reset as true or false.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] confirm_cb The reset confirm callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_unset_reset_confirm_cb()
+ */
+int smartthings_set_reset_confirm_cb(smartthings_h handle,
+ smartthings_reset_confirm_cb confirm_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets reset confirmation callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_reset_confirm_cb()
+ */
+int smartthings_unset_reset_confirm_cb(smartthings_h handle);
+
+/**
+ * @brief Sets reset result callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks Only one callback function can be set with this function.
+ * @remarks If multiple callbacks are set, the last one is registered only.
+ * @remarks Callback is called when reset operation returns its result.
+ * @remarks When callback is called, user can check reset operation succeeds or fails.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] reset_result_cb The reset result callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_unset_reset_result_cb()
+ */
+int smartthings_set_reset_result_cb(smartthings_h handle,
+ smartthings_reset_result_cb reset_result_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets reset result callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_reset_result_cb()
+ */
+int smartthings_unset_reset_result_cb(smartthings_h handle);
+
+
+/**
+ * @brief Sets callback for getting randomly generated PIN for the PIN-based ownership transfer request.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks Only one callback function can be set with this function.
+ * @remarks If multiple callbacks are set, the last one is registered only.
+ * @remarks @a generated_cb callback is called when PIN is generated.
+ * @remarks @a close_cb callback is called when PIN based ownership transfer is finished.
+ * @remarks When @a generated_cb callback is called, user can see PIN value and length.
+ * @remarks When @a close_cb callback is called, user can know PIN based ownership transfer is finished.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] generated_cb The PIN generation callback to register
+ * @param[in] close_cb The PIN display close callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_unset_pin_cb()
+ */
+int smartthings_set_pin_cb(smartthings_h handle,
+ smartthings_pin_generated_cb generated_cb,
+ smartthings_pin_display_close_cb close_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets PIN callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_pin_cb()
+ */
+int smartthings_unset_pin_cb(smartthings_h handle);
+
+/**
+ * @brief Sets callback for getting Wi-Fi AP information during Easy-setup.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks Only one callback function can be set with this function.
+ * @remarks If multiple callbacks are set, the last one is registered only.
+ * @remarks Callback is called when Wi-Fi provisioning event occurs.
+ * @remarks When callback is called, user can get Wi-Fi provisioning information.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] wifi_ap_cb The Wi-Fi AP callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_unset_wifi_ap_provisioning_cb()
+ */
+int smartthings_set_wifi_ap_provisioning_cb(smartthings_h handle,
+ smartthings_wifi_ap_provisioning_cb wifi_ap_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets callback for getting Wi-Fi AP information during Easy-setup.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_wifi_ap_provisioning_cb()
+ */
+int smartthings_unset_wifi_ap_provisioning_cb(smartthings_h handle);
+
+/**
+ * @brief Sets callback for getting device provisioning information.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks Only one callback function can be set with this function.
+ * @remarks If multiple callbacks are set, the last one is registered only.
+ * @remarks Callback is called when device provisioning event occurs.
+ * @remarks When callback is called, user can get device provisioning information.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] dev_prov_cb The device provisioning callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_unset_device_provisioning_cb()
+ */
+int smartthings_set_device_provisioning_cb(smartthings_h handle,
+ smartthings_device_provisioning_cb dev_prov_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets callback for getting device provisioning information.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_device_provisioning_cb()
+ */
+int smartthings_unset_device_provisioning_cb(smartthings_h handle);
+
+/**
+ * @brief Sets callback for informing the scan AP list request.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks Only one callback function can be set with this function.
+ * @remarks If multiple callbacks are set, the last one is registered only.
+ * @remarks Callback is called when GET request for access point list.
+ * @remarks When callback is called, user scans access points, sets AP list and sends it to agent.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] scan_ap_cb The callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_unset_scan_ap_cb()
+ * @see smartthings_send_ap_list()
+ */
+int smartthings_set_scan_ap_cb(smartthings_h handle,
+ smartthings_scan_ap_cb scan_ap_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets callback for informing the scan AP list request.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_scan_ap_cb()
+ */
+int smartthings_unset_scan_ap_cb(smartthings_h handle);
+
+/**
+ * @brief Sets callback for informing the stop soft AP request.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks Only one callback function can be set with this function.
+ * @remarks If multiple callbacks are set, the last one is registered only.
+ * @remarks Callback is called when POST request for stopping soft AP.
+ * @remarks When callback is called, user stops soft AP.
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] stop_soft_ap_cb The callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_unset_stop_soft_ap_cb()
+ */
+int smartthings_set_stop_soft_ap_cb(smartthings_h handle,
+ smartthings_stop_soft_ap_cb stop_soft_ap_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets callback for informing the stop soft AP request.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_stop_soft_ap_cb()
+ */
+int smartthings_unset_stop_soft_ap_cb(smartthings_h handle);
+
+/**
+ * @brief Sends a user confirmation for MUTUAL VERIFICATION BASED JUST WORK Ownership transfer.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing \n
+ * %http://tizen.org/privilege/internet
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] confirm The user confirmation for OTM(ownership transfer method)
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_user_confirm_cb()
+ * @see smartthings_unset_user_confirm_cb()
+ */
+int smartthings_send_user_confirm(smartthings_h handle, bool confirm);
+
+
+/**
+ * @brief Sends a reset confirmation.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing \n
+ * %http://tizen.org/privilege/internet
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] confirm The reset confirmation
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_reset_confirm_cb()
+ * @see smartthings_unset_reset_confirm_cb()
+ */
+int smartthings_send_reset_confirm(smartthings_h handle, bool confirm);
+
+/**
+ * @brief Sends a reset command for resetting the device's Cloud signup and Easy-setup.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing \n
+ * %http://tizen.org/privilege/internet
+ *
+ * @param[in] handle The SmartThings handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_set_reset_result_cb()
+ * @see smartthings_unset_reset_result_cb()
+ */
+int smartthings_reset(smartthings_h handle);
+
+/**
+ * @brief Gets SSID of access point.
+ * @since_ses 1
+ *
+ * @remarks The @a ssid should be released using free().
+ *
+ * @param[in] ap_info_h The SmartThings AP information handle
+ * @param[out] ssid The SSID name
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ *
+ * @see smartthings_set_wifi_ap_provisioning_cb()
+ * @see smartthings_unset_wifi_ap_provisioning_cb()
+ */
+int smartthings_apinfo_get_ssid(smartthings_ap_info_h ap_info_h, char **ssid);
+
+/**
+ * @brief Gets password of access point.
+ * @since_ses 1
+ *
+ * @remarks The @a pwd should be released using free().
+ *
+ * @param[in] ap_info_h The SmartThings AP information handle
+ * @param[out] pwd The password
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ *
+ * @see smartthings_set_wifi_ap_provisioning_cb()
+ * @see smartthings_unset_wifi_ap_provisioning_cb()
+ */
+int smartthings_apinfo_get_password(smartthings_ap_info_h ap_info_h, char **pwd);
+
+/**
+ * @brief Gets authentification type of access point.
+ * @since_ses 1
+ *
+ * @param[in] ap_info_h The SmartThings AP information handle
+ * @param[out] authtype The authentification type
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ *
+ * @see smartthings_set_wifi_ap_provisioning_cb()
+ * @see smartthings_unset_wifi_ap_provisioning_cb()
+ */
+int smartthings_apinfo_get_authtype(smartthings_ap_info_h ap_info_h, smartthings_wifi_authtype_e *authtype);
+
+/**
+ * @brief Gets encryption type of access point.
+ * @since_ses 1
+ *
+ * @param[in] ap_info_h The SmartThings AP information handle
+ * @param[out] enctype The encryption type
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ *
+ * @see smartthings_set_wifi_ap_provisioning_cb()
+ * @see smartthings_unset_wifi_ap_provisioning_cb()
+ */
+int smartthings_apinfo_get_enctype(smartthings_ap_info_h ap_info_h, smartthings_wifi_enctype_e *enctype);
+
+/**
+ * @brief Gets channel information of access point.
+ * @since_ses 1
+ *
+ * @param[in] ap_info_h The SmartThings AP information handle
+ * @param[out] channel The frequency channel
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ *
+ * @see smartthings_set_wifi_ap_provisioning_cb()
+ * @see smartthings_unset_wifi_ap_provisioning_cb()
+ */
+int smartthings_apinfo_get_channel(smartthings_ap_info_h ap_info_h, int *channel);
+
+/**
+ * @brief Gets language of device provisioing information.
+ * @since_ses 1
+ *
+ * @remarks The @a language should be released using free().
+ *
+ * @param[in] dev_prov_h The SmartThings device provisioning information handle
+ * @param[out] language The IETF language tag using ISO 639X
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ *
+ * @see smartthings_set_device_provisioning_cb()
+ * @see smartthings_unset_device_provisioning_cb()
+ */
+int smartthings_devinfo_get_language(smartthings_device_prov_info_h dev_prov_h, char **language);
+
+/**
+ * @brief Gets country of device provisioing information.
+ * @since_ses 1
+ *
+ * @remarks The @a country should be released using free().
+ *
+ * @param[in] dev_prov_h The SmartThings device provisioning information handle
+ * @param[out] country The ISO Country Code (ISO 3166-1 Alpha-2)
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ *
+ * @see smartthings_set_device_provisioning_cb()
+ * @see smartthings_unset_device_provisioning_cb()
+ */
+int smartthings_devinfo_get_country(smartthings_device_prov_info_h dev_prov_h, char **country);
+
+/**
+ * @brief Gets datetime of device provisioing information.
+ * @since_ses 1
+ *
+ * @remarks The @a datetime should be released using free().
+ *
+ * @param[in] dev_prov_h The SmartThings device provisioning information handle
+ * @param[out] datetime The date and time
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ *
+ * @see smartthings_set_device_provisioning_cb()
+ * @see smartthings_unset_device_provisioning_cb()
+ */
+int smartthings_devinfo_get_datetime(smartthings_device_prov_info_h dev_prov_h, char **datetime);
+
+/**
+ * @brief Creates a SmartThings AP list handle.
+ * @since_ses 1
+ *
+ * @remarks The @a ap_list_h must be released using smartthings_aplist_destroy().
+ *
+ * @param[out] ap_list_h The SmartThings AP list handle to be newly created on success
+ * @param[in] count The count of AP
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OUT_OF_MEMORY Out of memory
+ *
+ * @see smartthings_aplist_destroy()
+ */
+int smartthings_aplist_create(smartthings_ap_list_h *ap_list_h, unsigned int count);
+
+/**
+ * @brief Destroys a SmartThings AP list handle.
+ * @since_ses 1
+ *
+ * @param[in] ap_list_h The SmartThings AP list handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_aplist_create()
+ */
+int smartthings_aplist_destroy(smartthings_ap_list_h ap_list_h);
+
+/**
+ * @brief Sets SSID at the specific index of AP list handle.
+ * @since_ses 1
+ *
+ * @param[in] ap_list_h The SmartThings AP list handle
+ * @param[in] idx The index
+ * @param[in] ssid The SSID of AP
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_aplist_create()
+ * @see smartthings_aplist_destroy()
+ */
+int smartthings_aplist_set_ssid(smartthings_ap_list_h ap_list_h, int idx, const char *ssid);
+
+/**
+ * @brief Sets BSSID at the specific index of AP list handle.
+ * @since_ses 1
+ *
+ * @param[in] ap_list_h The SmartThings AP list handle
+ * @param[in] idx The index
+ * @param[in] bssid The BSSID of AP
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_aplist_create()
+ * @see smartthings_aplist_destroy()
+ */
+int smartthings_aplist_set_bssid(smartthings_ap_list_h ap_list_h, int idx, const char *bssid);
+
+/**
+ * @brief Sets authentification type at the specific index of AP list handle.
+ * @since_ses 1
+ *
+ * @param[in] ap_list_h The SmartThings AP list handle
+ * @param[in] idx The index
+ * @param[in] authtype The authentification type of AP
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_aplist_create()
+ * @see smartthings_aplist_destroy()
+ */
+int smartthings_aplist_set_authtype(smartthings_ap_list_h ap_list_h, int idx, smartthings_wifi_authtype_e authtype);
+
+/**
+ * @brief Sets encryption type at the specific index of AP list handle.
+ * @since_ses 1
+ *
+ * @param[in] ap_list_h The SmartThings AP list handle
+ * @param[in] idx The index
+ * @param[in] enctype The encryption type of AP
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_aplist_create()
+ * @see smartthings_aplist_destroy()
+ */
+int smartthings_aplist_set_enctype(smartthings_ap_list_h ap_list_h, int idx, smartthings_wifi_enctype_e enctype);
+
+/**
+ * @brief Sets frequency channel at the specific index of AP list handle.
+ * @since_ses 1
+ *
+ * @param[in] ap_list_h The SmartThings AP list handle
+ * @param[in] idx The index
+ * @param[in] channel The frequency channel of AP
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_aplist_create()
+ * @see smartthings_aplist_destroy()
+ */
+int smartthings_aplist_set_channel(smartthings_ap_list_h ap_list_h, int idx, int channel);
+
+/**
+ * @brief Sets signal level at the specific index of AP list handle.
+ * @since_ses 1
+ *
+ * @param[in] ap_list_h The SmartThings AP list handle
+ * @param[in] idx The index
+ * @param[in] signal_level The signal level of AP
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_aplist_create()
+ * @see smartthings_aplist_destroy()
+ */
+int smartthings_aplist_set_signal_level(smartthings_ap_list_h ap_list_h, int idx, int signal_level);
+
+/**
+ * @brief Sets max speed rate at the specific index of AP list handle.
+ * @since_ses 1
+ *
+ * @param[in] ap_list_h The SmartThings AP list handle
+ * @param[in] idx The index
+ * @param[in] max_rate The max speed rate of AP
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_aplist_create()
+ * @see smartthings_aplist_destroy()
+ */
+int smartthings_aplist_set_max_rate(smartthings_ap_list_h ap_list_h, int idx, int max_rate);
+
+/**
+ * @brief Sends the scanned AP list.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing \n
+ * %http://tizen.org/privilege/internet
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] ap_list_h The SmartThings AP list handle
+ * @param[in] req_id The request ID
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_aplist_create()
+ * @see smartthings_aplist_destroy()
+ * @see smartthings_set_scan_ap_cb()
+ */
+int smartthings_send_ap_list(smartthings_h handle, smartthings_ap_list_h ap_list_h, int req_id);
+
+/**
+ * @brief Creates a SmartThings cloud information handle.
+ * @since_ses 1
+ *
+ * @remarks The @a cloud_info_h must be released using smartthings_cloudinfo_destroy().
+ *
+ * @param[out] cloud_info_h The SmartThings cloud information handle to be newly created on success
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_OUT_OF_MEMORY Out of memory
+ *
+ * @see smartthings_cloudinfo_destroy()
+ */
+int smartthings_cloudinfo_create(smartthings_cloud_info_h *cloud_info_h);
+
+/**
+ * @brief Destroys a SmartThings cloud information handle.
+ * @since_ses 1
+ *
+ * @param[in] cloud_info_h The SmartThings cloud information handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_cloudinfo_create()
+ */
+int smartthings_cloudinfo_destroy(smartthings_cloud_info_h cloud_info_h);
+
+/**
+ * @brief Sets region of cloud information.
+ * @since_ses 1
+ *
+ * @remarks The @a region can be set to one of "global" or "china".
+ * @remarks If it doesn't use this function, the @a region will be set to "global" internally.
+ *
+ * @param[in] cloud_info_h The SmartThings cloud information handle
+ * @param[in] region The region name
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_cloudinfo_set_region(smartthings_cloud_info_h cloud_info_h, const char *region);
+
+/**
+ * @brief Sets authentification provider of cloud information.
+ * @since_ses 1
+ *
+ * @param[in] cloud_info_h The SmartThings cloud information handle
+ * @param[in] auth_provider The authentification provider
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_cloudinfo_set_auth_provider(smartthings_cloud_info_h cloud_info_h, const char *auth_provider);
+
+/**
+ * @brief Sets access token of cloud information.
+ * @since_ses 1
+ *
+ * @param[in] cloud_info_h The SmartThings cloud information handle
+ * @param[in] access_token The access token
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_cloudinfo_set_access_token(smartthings_cloud_info_h cloud_info_h, const char *access_token);
+
+/**
+ * @brief Sets refresh token of cloud information.
+ * @since_ses 1
+ *
+ * @param[in] cloud_info_h The SmartThings cloud information handle
+ * @param[in] refresh_token The refresh token
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_cloudinfo_set_refresh_token(smartthings_cloud_info_h cloud_info_h, const char *refresh_token);
+
+/**
+ * @brief Sets user ID of cloud information.
+ * @since_ses 1
+ *
+ * @param[in] cloud_info_h The SmartThings cloud information handle
+ * @param[in] user_id The user ID
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_cloudinfo_set_user_id(smartthings_cloud_info_h cloud_info_h, const char *user_id);
+
+/**
+ * @brief Sets client ID of cloud information.
+ * @since_ses 1
+ *
+ * @param[in] cloud_info_h The SmartThings cloud information handle
+ * @param[in] client_id The client ID
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_cloudinfo_set_client_id(smartthings_cloud_info_h cloud_info_h, const char *client_id);
+
+/**
+ * @brief Requests to sign up to cloud.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing \n
+ * %http://tizen.org/privilege/internet
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] cloud_info_h The handle for cloud signup
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ */
+int smartthings_sign_up_cloud(smartthings_h handle, smartthings_cloud_info_h cloud_info_h);
+
+/**
+ * @brief Sets preconfigured PIN.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] pin The PIN code to preconfigure
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ */
+int smartthings_set_preconfigured_pin(smartthings_h handle, const char* pin);
+
+/**
+ * @brief Sets MOT(multiple ownership transfer) status.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.master \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] handle The SmartThings handle
+ * @param[in] enable The MOT(multiple ownership transfer) status
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ */
+int smartthings_set_mot_status(smartthings_h handle, bool enable);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_H__ */
--- /dev/null
+/*****************************************************************
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd. All Rights Reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************/
+
+
+#ifndef __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_PAYLOAD_H__
+#define __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_PAYLOAD_H__
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @file smartthings_payload.h
+ */
+
+/**
+ * @addtogroup CAPI_SMARTTHINGS_THING_PAYLOAD_MODULE
+ * @{
+ */
+
+/**
+ * @brief The SmartThings payload handle.
+ * @since_ses 1
+ */
+typedef struct smartthings_payload_s *smartthings_payload_h;
+
+/**
+ * @brief Creates a SmartThings payload handle.
+ * @since_ses 1
+ *
+ * @remarks The @a payload must be released using smartthings_payload_destroy().
+ * @remarks If the @a payload is set to parent payload as an object or object array
+ * using smartthings_payload_set_object() or smartthings_payload_set_object_array(),
+ * the @a payload must not be released.
+
+ * @param[out] payload The SmartThings payload handle to be newly created on success
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ *
+ * @see smartthings_payload_destroy()
+ */
+int smartthings_payload_create(smartthings_payload_h *payload);
+
+/**
+ * @brief Destroys a SmartThings payload handle and releases all its resources.
+ * @since_ses 1
+ *
+ * @remarks If the @a payload has child payload, its child payload will be released as well.
+ *
+ * @param[in] payload The SmartThings payload handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_payload_create()
+ */
+int smartthings_payload_destroy(smartthings_payload_h payload);
+
+/**
+ * @brief Sets an integer value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing value for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] value The value to set
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_set_int(smartthings_payload_h payload, const char *attr_name, int value);
+
+/**
+ * @brief Sets a boolean value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing value for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] value The value to set
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_set_bool(smartthings_payload_h payload, const char *attr_name, bool value);
+
+/**
+ * @brief Sets a double value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing value for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] value The value to set
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_set_double(smartthings_payload_h payload, const char *attr_name, double value);
+
+/**
+ * @brief Sets a string value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing value for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] value The value to set
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_set_string(smartthings_payload_h payload, const char *attr_name, const char *value);
+
+/**
+ * @brief Sets a byte string value and length for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing value for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] value The value to set
+ * @param[in] length The size of value
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
+ */
+int smartthings_payload_set_byte_string(smartthings_payload_h payload, const char *attr_name, const char *value, unsigned int length);
+
+/**
+ * @brief Sets an object value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The @a value is SmartThings payload handle.
+ * @remarks The function replaces any existing value for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] value The value to set
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_set_object(smartthings_payload_h payload, const char *attr_name, smartthings_payload_h value);
+
+/**
+ * @brief Sets an integer array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing array for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] array The array associated with the given attribute name
+ * @param[in] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_set_int_array(smartthings_payload_h payload, const char *attr_name, const int *array, unsigned int length);
+
+/**
+ * @brief Sets a boolean array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing array for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] array The array associated with the given attribute name
+ * @param[in] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_set_bool_array(smartthings_payload_h payload, const char *attr_name, const bool *array, unsigned int length);
+
+/**
+ * @brief Sets a double array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing array for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] array The array associated with the given attribute name
+ * @param[in] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_set_double_array(smartthings_payload_h payload, const char *attr_name, const double *array, unsigned int length);
+
+/**
+ * @brief Sets a string array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing array for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] array The array associated with the given attribute name
+ * @param[in] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_set_string_array(smartthings_payload_h payload, const char *attr_name, const char **array, unsigned int length);
+
+/**
+ * @brief Sets an object array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The function replaces any existing array for the given @a attr_name.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[in] array The array associated with the given attribute name
+ * @param[in] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ */
+int smartthings_payload_set_object_array(smartthings_payload_h payload, const char *attr_name, smartthings_payload_h *array, unsigned int length);
+
+/**
+ * @brief Adds a payload for child resource of collection resource.
+ * @since_ses 1
+ *
+ * @remarks The @a resource_uri is key value, one of several child resources of the collection resource.
+ * @remarks The @a value is SmartThings payload handle.
+ * @remarks The function replaces any existing payload for the given @a resource_uri.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] resource_uri The resource URI of child resource
+ * @param[in] value The payload associated with the given resource URI
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ */
+int smartthings_payload_add_collection_object(smartthings_payload_h payload, const char *resource_uri, smartthings_payload_h value);
+
+/**
+ * @brief Gets an integer value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] value The value associated with the given attribute name
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ */
+int smartthings_payload_get_int(smartthings_payload_h payload, const char *attr_name, int *value);
+
+/**
+ * @brief Gets a boolean value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] value The value associated with the given attribute name
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ */
+int smartthings_payload_get_bool(smartthings_payload_h payload, const char *attr_name, bool *value);
+
+/**
+ * @brief Gets a double value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] value The value associated with the given attribute name
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ */
+int smartthings_payload_get_double(smartthings_payload_h payload, const char *attr_name, double *value);
+
+/**
+ * @brief Gets a string value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The @a value should be released using free().
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] value The value associated with the given attribute name
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ */
+int smartthings_payload_get_string(smartthings_payload_h payload, const char *attr_name, char **value);
+
+/**
+ * @brief Gets a byte string value and length for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The @a value should be released using free().
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] value The value associated with the given attribute name
+ * @param[out] length The size of value
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ */
+int smartthings_payload_get_byte_string(smartthings_payload_h payload, const char *attr_name, char **value, unsigned int *length);
+
+/**
+ * @brief Gets an object value for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The @a value is SmartThings payload handle.
+ * @remarks The @a value must be released using smartthings_payload_release_object().
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] value The value associated with the given attribute name
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ */
+int smartthings_payload_get_object(smartthings_payload_h payload, const char *attr_name, smartthings_payload_h *value);
+
+/**
+ * @brief Gets an integer array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The @a array must be released using smartthings_payload_release_int_array().
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] array The array associated with the given attribute name
+ * @param[out] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ *
+ * @see smartthings_payload_release_int_array()
+ */
+int smartthings_payload_get_int_array(smartthings_payload_h payload, const char *attr_name, int **array, unsigned int *length);
+
+/**
+ * @brief Gets a boolean array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The @a array must be released using smartthings_payload_release_bool_array().
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] array The array associated with the given attribute name
+ * @param[out] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ *
+ * @see smartthings_payload_release_bool_array()
+ */
+int smartthings_payload_get_bool_array(smartthings_payload_h payload, const char *attr_name, bool **array, unsigned int *length);
+
+/**
+ * @brief Gets a double array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The @a array must be released using smartthings_payload_release_double_array().
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] array The array associated with the given attribute name
+ * @param[out] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ *
+ * @see smartthings_payload_release_double_array()
+ */
+int smartthings_payload_get_double_array(smartthings_payload_h payload, const char *attr_name, double **array, unsigned int *length);
+
+/**
+ * @brief Gets a string array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The @a array must be released using smartthings_payload_release_string_array().
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] array The array associated with the given attribute name
+ * @param[out] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ *
+ * @see smartthings_payload_release_string_array()
+ */
+int smartthings_payload_get_string_array(smartthings_payload_h payload, const char *attr_name, char ***array, unsigned int *length);
+
+/**
+ * @brief Gets an object array for the attribute name.
+ * @since_ses 1
+ *
+ * @remarks The @a attr_name is key value, one of several properties of the resource type.
+ * @remarks The @a array is a list of SmartThings payload handle.
+ * @remarks The @a array must be released using smartthings_payload_release_object_array().
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] attr_name The attribute name
+ * @param[out] array The array associated with the given attribute name
+ * @param[out] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ *
+ * @see smartthings_payload_release_object_array()
+ */
+int smartthings_payload_get_object_array(smartthings_payload_h payload, const char *attr_name, smartthings_payload_h **array, unsigned int *length);
+
+/**
+ * @brief Gets a payload for child resource of collection resource.
+ * @since_ses 1
+ *
+ * @remarks The @a resource_uri is key value, one of several child resources of the collection resource.
+ * @remarks The @a value is SmartThings payload handle.
+ * @remarks The @a value must be released using smartthings_payload_release_object().
+ *
+ * @param[in] payload The SmartThings payload handle
+ * @param[in] resource_uri The resource URI of child resource
+ * @param[out] value The payload associated with the given resource URI
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NO_DATA No data
+ */
+int smartthings_payload_get_collection_object(smartthings_payload_h payload, const char *resource_uri, smartthings_payload_h *value);
+
+/**
+ * @brief Releases an integer array of the SmartThings payload.
+ * @since_ses 1
+ *
+ * @param[in] array The array to release
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_payload_get_int_array()
+ */
+int smartthings_payload_release_int_array(int *array);
+
+/**
+ * @brief Releases a boolean array of the SmartThings payload.
+ * @since_ses 1
+ *
+ * @param[in] array The array to release
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_payload_get_bool_array()
+ */
+int smartthings_payload_release_bool_array(bool *array);
+
+/**
+ * @brief Releases a double array of the SmartThings payload.
+ * @since_ses 1
+ *
+ * @param[in] array The array to release
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_payload_get_double_array()
+ */
+int smartthings_payload_release_double_array(double *array);
+
+/**
+ * @brief Releases a string array of the SmartThings payload.
+ * @since_ses 1
+ *
+ * @param[in] array The array to release
+ * @param[in] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_payload_get_string_array()
+ */
+int smartthings_payload_release_string_array(char **array, unsigned int length);
+
+/**
+ * @brief Releases an object array of the SmartThings payload.
+ * @since_ses 1
+ *
+ * @param[in] array The array to release
+ * @param[in] length The length of @a array
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_payload_get_object_array()
+ */
+int smartthings_payload_release_object_array(smartthings_payload_h *array, unsigned int length);
+
+/**
+ * @brief Releases a SmartThings payload.
+ * @since_ses 1
+ *
+ * @remarks The function is different with smartthings_payload_destroy().
+ * @remarks The function releases only payload value that is obtained by smartthings_payload_get_object().
+ *
+ * @param[in] payload The payload to release
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_payload_get_object()
+ */
+int smartthings_payload_release_object(smartthings_payload_h payload);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_PAYLOAD_H__ */
--- /dev/null
+/*****************************************************************
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd. All Rights Reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************/
+
+
+#ifndef __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_RESOURCE_H__
+#define __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_RESOURCE_H__
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <tizen.h>
+#include <smartthings_payload.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @file smartthings_resource.h
+ */
+
+/**
+ * @addtogroup CAPI_SMARTTHINGS_THING_RESOURCE_MODULE
+ * @{
+ */
+
+/**
+ * @brief Enumeration for the SmartThings resource error.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_RESOURCE_ERROR_NONE = TIZEN_ERROR_NONE, /**< Successful */
+ SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER, /**< Invalid parameter */
+ SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY, /**< Out of memory */
+ SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED = TIZEN_ERROR_PERMISSION_DENIED, /**< Permission denied */
+ SMARTTHINGS_RESOURCE_ERROR_NO_DATA = TIZEN_ERROR_NO_DATA, /**< No data */
+ SMARTTHINGS_RESOURCE_ERROR_NOT_SUPPORTED = TIZEN_ERROR_NOT_SUPPORTED, /**< Not supported */
+ SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED = TIZEN_ERROR_UNKNOWN - 1, /**< Operation failed */
+ SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE = TIZEN_ERROR_UNKNOWN -2 /**< Service unavailable */
+} smartthings_resource_error_e;
+
+/**
+ * @brief Enumeration for the request type of resource and collection resource.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_RESOURCE_REQUEST_GET = 0, /**< Get request type */
+ SMARTTHINGS_RESOURCE_REQUEST_SET = 1, /**< Set request type */
+ SMARTTHINGS_RESOURCE_REQUEST_COLLECTION_GET = 2, /**< Get request type for collection */
+ SMARTTHINGS_RESOURCE_REQUEST_COLLECTION_SET = 3 /**< Set request type for collection */
+} smartthings_resource_req_type_e;
+
+/**
+ * @brief Enumeration for RPC connection status.
+ * @since_ses 1
+ */
+typedef enum {
+ SMARTTHINGS_RESOURCE_CONNECTION_STATUS_CONNECTED = 0, /**< Connection is connected */
+ SMARTTHINGS_RESOURCE_CONNECTION_STATUS_DISCONNECTED, /**< Connection is disconnected */
+ SMARTTHINGS_RESOURCE_CONNECTION_STATUS_REJECTED, /**< Connection is rejected */
+} smartthings_resource_connection_status_e;
+
+/**
+ * @brief The SmartThings resource handle.
+ * @since_ses 1
+ */
+typedef struct smartthings_resource_s *smartthings_resource_h;
+
+/**
+ * @brief Callback for status of connection to SmartThings Thing agent.
+ * @since_ses 1
+ *
+ * @remarks The @a handle should not be released.
+ * @remarks The @a handle is the same object for which the callback was set/added.
+ * @remarks The @a handle will be released when smartthings_deinitialize() is called.
+ * @remarks When callback is called, user can see connection status as #smartthings_connection_status_e enumeration value.
+ *
+ * @param[in] result The result of connection operation
+ * @param[in] handle The SmartThings handle
+ * @param[in] status The status of connection
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_resource_initialize()
+ */
+typedef void (*smartthings_resource_connection_status_cb)(smartthings_resource_h handle, smartthings_resource_connection_status_e status, void *user_data);
+
+/**
+ * @brief Callback for handling request(GET/SET) messages.
+ * @since_ses 1
+ *
+ * @remarks The @a payload is NULL when @a req_type is #SMARTTHINGS_RESOURCE_REQUEST_GET.
+ * @remarks The @a payload can be used only in the callback. To use outside, make a copy.
+ * @remarks The @a st_h should not be released.
+ * @remarks The @a st_h is the same object for which the callback was set/added.
+ * @remarks The @a st_h will be released when smartthings_resource_deinitialize() is called.
+ * @remarks The @a payload should not be released.
+ * @remarks The @a uri can be used only in the callback. To use outside, make a copy.
+ *
+ * @param[in] st_h The SmartThings resource handle
+ * @param[in] req_id The request ID of request message
+ * @param[in] uri The resource URI
+ * @param[in] req_type The request type for request message
+ * @param[in] payload The payload for SET request message
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_resource_set_request_cb()
+ * @see smartthings_resource_unset_request_cb()
+ */
+typedef void (*smartthings_resource_request_cb)(smartthings_resource_h st_h, int req_id, const char *uri,
+ smartthings_resource_req_type_e req_type,
+ smartthings_payload_h payload, void *user_data);
+
+/**
+ * @brief Callback for status of resource registration to cloud.
+ * @since_ses 1
+ *
+ * @remarks This callback will be called when status of resource registration is changed.
+ * @remarks The @a st_h should not be released.
+ * @remarks The @a st_h is the same object for which the callback was set/added.
+ * @remarks The @a st_h will be released when smartthings_resource_deinitialize() is called.
+ * @remarks The @a is_registered will be true when resources are registered to cloud.
+ *
+ * @param[in] st_h The SmartThings resource handle
+ * @param[in] is_registered The status of resource registration to cloud
+ * @param[in] user_data The user data passed from the callback registration function
+ *
+ * @see smartthings_resource_set_cloud_registration_status_cb()
+ * @see smartthings_resource_unset_cloud_registration_status_cb()
+ */
+typedef void (*smartthings_resource_cloud_registration_status_cb)(smartthings_resource_h st_h, bool is_registered, void *user_data);
+
+
+/**
+ * @brief Initializes a resource handle and connects to agent.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks The @a st_h must be released using smartthings_resource_deinitialize().
+ * @remarks Ths function returns #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED\n
+ * if the application has no app-defined privilege for 'http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource'.
+ *
+ * @param[out] st_h The SmartThings resource handle to be newly created on success
+ * @param[in] connection_status_cb The connection status callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NOT_SUPPORTED Not supported
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_resource_deinitialize()
+ */
+int smartthings_resource_initialize(smartthings_resource_h *st_h,
+ smartthings_resource_connection_status_cb connection_status_cb,
+ void *user_data);
+
+/**
+ * @brief Deinitializes a resource handle and disconnects from the agent.
+ * @since_ses 1
+ *
+ * @param[in] st_h The SmartThings resource handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ *
+ * @see smartthings_resource_initialize()
+ */
+int smartthings_resource_deinitialize(smartthings_resource_h st_h);
+
+/**
+ * @brief Sets resource request callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] st_h The SmartThings resource handle
+ * @param[in] req_cb The request callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_resource_unset_request_cb()
+ */
+int smartthings_resource_set_request_cb(smartthings_resource_h st_h,
+ smartthings_resource_request_cb req_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets resource request callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] st_h The SmartThings resource handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_resource_set_request_cb()
+ */
+int smartthings_resource_unset_request_cb(smartthings_resource_h st_h);
+
+/**
+ * @brief Sends response for resource request message.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing \n
+ * %http://tizen.org/privilege/internet
+ *
+ * @param[in] st_h The SmartThings resource handle
+ * @param[in] req_id The request ID of request message
+ * @param[in] uri The resource URI
+ * @param[in] payload The payload of response message
+ * @param[in] result The result of response
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ */
+int smartthings_resource_send_response(smartthings_resource_h st_h, int req_id, const char *uri, smartthings_payload_h payload, bool result);
+
+/**
+ * @brief Notifies resource change.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing \n
+ * %http://tizen.org/privilege/internet
+ *
+ * @param[in] st_h The SmartThings resource handle
+ * @param[in] uri The resource URI
+ * @param[in] payload The payload of response message
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ */
+int smartthings_resource_notify(smartthings_resource_h st_h, const char *uri, smartthings_payload_h payload);
+
+/**
+ * @brief Gets resource URIs.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @remarks The @a uris should be released using free().
+ *
+ * @param[in] st_h The SmartThings resource handle
+ * @param[out] count The resource count
+ * @param[out] uris The resource URI list
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ */
+int smartthings_resource_get_uris(smartthings_resource_h st_h, int *count, char ***uris);
+
+/**
+ * @brief Sets cloud registration callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] st_h The SmartThings resource handle
+ * @param[in] reg_cb The callback to register
+ * @param[in] user_data The user data to be passed to the callback function
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_resource_unset_cloud_registration_status_cb()
+ */
+int smartthings_resource_set_cloud_registration_status_cb(smartthings_resource_h st_h,
+ smartthings_resource_cloud_registration_status_cb reg_cb,
+ void *user_data);
+
+/**
+ * @brief Unsets cloud registration callback.
+ * @since_ses 1
+ * @privilege %http://com.samsung.tizen.smartthings-thing/appdefined/smartthings-thing.resource \n
+ * %http://tizen.org/privilege/appmanager.launch \n
+ * %http://tizen.org/privilege/datasharing
+ *
+ * @param[in] st_h The SmartThings resource handle
+ *
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_NONE Successful
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_OPERATION_FAILED Operation failed
+ * @retval #SMARTTHINGS_RESOURCE_ERROR_SERVICE_UNAVAILABLE Service unavailable
+ *
+ * @see smartthings_resource_set_cloud_registration_status_cb()
+ */
+int smartthings_resource_unset_cloud_registration_status_cb(smartthings_resource_h st_h);
+
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SAMSUNG_EXPERIENCE_SERVICE_SMARTTHINGS_RESOURCE_H__ */
projects / tools / tbb.git / commitdiff
