mxc_nand: fixed some typos (cosmetic)

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Signed-off-by: Scott Wood <scottwood@freescale.com>

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 2a8dd7e2395ea3b5d3ba1a937ba7627c4b2c0bce..78e07cc7f7b9cb339cd4715518daa27d915a86a0 100644 (file)
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -350,7 +350,7 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr)
 }
 
 /*
- * This function requests the NANDFC to initate the transfer
+ * This function requests the NANDFC to initiate the transfer
  * of data currently in the NANDFC RAM buffer to the NAND device.
  */
 static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
@@ -394,7 +394,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
 }
 
 /*
- * Requests NANDFC to initated the transfer of data from the
+ * Requests NANDFC to initiate the transfer of data from the
  * NAND device into in the NANDFC ram buffer.
  */
 static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
@@ -637,7 +637,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
        MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
              host->page_addr, buf, oob);
 
-       /* first read out the data area and the available portion of OOB */
+       /* first read the data area and the available portion of OOB */
        for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
                int stat;
 
@@ -1179,7 +1179,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
                        /*
                         * before sending SEQIN command for partial write,
                         * we need read one page out. FSL NFC does not support
-                        * partial write. It alway send out 512+ecc+512+ecc ...
+                        * partial write. It always sends out 512+ecc+512+ecc
                         * for large page nand flash. But for small page nand
                         * flash, it does support SPARE ONLY operation.
                         */
@@ -1209,7 +1209,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
                send_prog_page(host, 0, host->spare_only);
 
                if (host->pagesize_2k && !is_mxc_nfc_11()) {
-                       /* data in 4 areas datas */
+                       /* data in 4 areas */
                        send_prog_page(host, 1, host->spare_only);
                        send_prog_page(host, 2, host->spare_only);
                        send_prog_page(host, 3, host->spare_only);
@@ -1225,10 +1225,9 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
        if (column != -1) {
                /*
                 * MXC NANDFC can only perform full page+spare or
-                * spare-only read/write.  When the upper layers
-                * layers perform a read/write buf operation,
-                * we will used the saved column adress to index into
-                * the full page.
+                * spare-only read/write. When the upper layers perform
+                * a read/write buffer operation, we will use the saved
+                * column address to index into the full page.
                 */
                send_addr(host, 0);
                if (host->pagesize_2k)
@@ -1377,7 +1376,7 @@ int board_nand_init(struct nand_chip *this)
        /* Unlock Block Command for given address range */
        writew(0x4, &host->regs->nfc_wrprot);
 
-       /* NAND bus width determines access funtions used by upper layer */
+       /* NAND bus width determines access functions used by upper layer */
        if (is_16bit_nand())
                this->options |= NAND_BUSWIDTH_16;