:stub-columns: 0
:widths: 1 1 16
-
- - .. row 1
-
- - char
-
- - ``driver[32]``
-
- - The name of the cec adapter driver.
-
- - .. row 2
-
- - char
-
- - ``name[32]``
-
- - The name of this CEC adapter. The combination ``driver`` and
- ``name`` must be unique.
-
- - .. row 3
-
- - __u32
-
- - ``capabilities``
-
- - The capabilities of the CEC adapter, see
- :ref:`cec-capabilities`.
-
- - .. row 4
-
- - __u32
-
- - ``version``
-
- - CEC Framework API version, formatted with the ``KERNEL_VERSION()``
- macro.
+ * - char
+ - ``driver[32]``
+ - The name of the cec adapter driver.
+ * - char
+ - ``name[32]``
+ - The name of this CEC adapter. The combination ``driver`` and
+ ``name`` must be unique.
+ * - __u32
+ - ``capabilities``
+ - The capabilities of the CEC adapter, see
+ :ref:`cec-capabilities`.
+ * - __u32
+ - ``version``
+ - CEC Framework API version, formatted with the ``KERNEL_VERSION()``
+ macro.
.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
:stub-columns: 0
:widths: 3 1 8
-
- - .. _`CEC-CAP-PHYS-ADDR`:
-
- - ``CEC_CAP_PHYS_ADDR``
-
- - 0x00000001
-
- - Userspace has to configure the physical address by calling
- :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`. If
- this capability isn't set, then setting the physical address is
- handled by the kernel whenever the EDID is set (for an HDMI
- receiver) or read (for an HDMI transmitter).
-
- - .. _`CEC-CAP-LOG-ADDRS`:
-
- - ``CEC_CAP_LOG_ADDRS``
-
- - 0x00000002
-
- - Userspace has to configure the logical addresses by calling
- :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. If
- this capability isn't set, then the kernel will have configured
- this.
-
- - .. _`CEC-CAP-TRANSMIT`:
-
- - ``CEC_CAP_TRANSMIT``
-
- - 0x00000004
-
- - Userspace can transmit CEC messages by calling
- :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. This implies that
- userspace can be a follower as well, since being able to transmit
- messages is a prerequisite of becoming a follower. If this
- capability isn't set, then the kernel will handle all CEC
- transmits and process all CEC messages it receives.
-
- - .. _`CEC-CAP-PASSTHROUGH`:
-
- - ``CEC_CAP_PASSTHROUGH``
-
- - 0x00000008
-
- - Userspace can use the passthrough mode by calling
- :ref:`ioctl CEC_S_MODE <CEC_S_MODE>`.
-
- - .. _`CEC-CAP-RC`:
-
- - ``CEC_CAP_RC``
-
- - 0x00000010
-
- - This adapter supports the remote control protocol.
-
- - .. _`CEC-CAP-MONITOR-ALL`:
-
- - ``CEC_CAP_MONITOR_ALL``
-
- - 0x00000020
-
- - The CEC hardware can monitor all messages, not just directed and
- broadcast messages.
+ * .. _`CEC-CAP-PHYS-ADDR`:
+
+ - ``CEC_CAP_PHYS_ADDR``
+ - 0x00000001
+ - Userspace has to configure the physical address by calling
+ :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`. If
+ this capability isn't set, then setting the physical address is
+ handled by the kernel whenever the EDID is set (for an HDMI
+ receiver) or read (for an HDMI transmitter).
+ * .. _`CEC-CAP-LOG-ADDRS`:
+
+ - ``CEC_CAP_LOG_ADDRS``
+ - 0x00000002
+ - Userspace has to configure the logical addresses by calling
+ :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. If
+ this capability isn't set, then the kernel will have configured
+ this.
+ * .. _`CEC-CAP-TRANSMIT`:
+
+ - ``CEC_CAP_TRANSMIT``
+ - 0x00000004
+ - Userspace can transmit CEC messages by calling
+ :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. This implies that
+ userspace can be a follower as well, since being able to transmit
+ messages is a prerequisite of becoming a follower. If this
+ capability isn't set, then the kernel will handle all CEC
+ transmits and process all CEC messages it receives.
+ * .. _`CEC-CAP-PASSTHROUGH`:
+
+ - ``CEC_CAP_PASSTHROUGH``
+ - 0x00000008
+ - Userspace can use the passthrough mode by calling
+ :ref:`ioctl CEC_S_MODE <CEC_S_MODE>`.
+ * .. _`CEC-CAP-RC`:
+
+ - ``CEC_CAP_RC``
+ - 0x00000010
+ - This adapter supports the remote control protocol.
+ * .. _`CEC-CAP-MONITOR-ALL`:
+
+ - ``CEC_CAP_MONITOR_ALL``
+ - 0x00000020
+ - The CEC hardware can monitor all messages, not just directed and
+ broadcast messages.
:stub-columns: 0
:widths: 1 1 16
-
- - .. row 1
-
- - __u8
-
- - ``log_addr[CEC_MAX_LOG_ADDRS]``
-
- - The actual logical addresses that were claimed. This is set by the
- driver. If no logical address could be claimed, then it is set to
- ``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then
- ``log_addr[0]`` is set to 0xf and all others to
- ``CEC_LOG_ADDR_INVALID``.
-
- - .. row 2
-
- - __u16
-
- - ``log_addr_mask``
-
- - The bitmask of all logical addresses this adapter has claimed. If
- this adapter is Unregistered then ``log_addr_mask`` sets bit 15
- and clears all other bits. If this adapter is not configured at
- all, then ``log_addr_mask`` is set to 0. Set by the driver.
-
- - .. row 3
-
- - __u8
-
- - ``cec_version``
-
- - The CEC version that this adapter shall use. See
- :ref:`cec-versions`. Used to implement the
- ``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages.
- Note that :ref:`CEC_OP_CEC_VERSION_1_3A <CEC-OP-CEC-VERSION-1-3A>` is not allowed by the CEC
- framework.
-
- - .. row 4
-
- - __u8
-
- - ``num_log_addrs``
-
- - Number of logical addresses to set up. Must be ≤
- ``available_log_addrs`` as returned by
- :ref:`CEC_ADAP_G_CAPS`. All arrays in
- this structure are only filled up to index
- ``available_log_addrs``-1. The remaining array elements will be
- ignored. Note that the CEC 2.0 standard allows for a maximum of 2
- logical addresses, although some hardware has support for more.
- ``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual
- number of logical addresses it could claim, which may be less than
- what was requested. If this field is set to 0, then the CEC
- adapter shall clear all claimed logical addresses and all other
- fields will be ignored.
-
- - .. row 5
-
- - __u32
-
- - ``vendor_id``
-
- - The vendor ID is a 24-bit number that identifies the specific
- vendor or entity. Based on this ID vendor specific commands may be
- defined. If you do not want a vendor ID then set it to
- ``CEC_VENDOR_ID_NONE``.
-
- - .. row 6
-
- - __u32
-
- - ``flags``
-
- - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags.
-
- - .. row 7
-
- - char
-
- - ``osd_name[15]``
-
- - The On-Screen Display name as is returned by the
- ``CEC_MSG_SET_OSD_NAME`` message.
-
- - .. row 8
-
- - __u8
-
- - ``primary_device_type[CEC_MAX_LOG_ADDRS]``
-
- - Primary device type for each logical address. See
- :ref:`cec-prim-dev-types` for possible types.
-
- - .. row 9
-
- - __u8
-
- - ``log_addr_type[CEC_MAX_LOG_ADDRS]``
-
- - Logical address types. See :ref:`cec-log-addr-types` for
- possible types. The driver will update this with the actual
- logical address type that it claimed (e.g. it may have to fallback
- to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED <CEC-LOG-ADDR-TYPE-UNREGISTERED>`).
-
- - .. row 10
-
- - __u8
-
- - ``all_device_types[CEC_MAX_LOG_ADDRS]``
-
- - CEC 2.0 specific: the bit mask of all device types. See
- :ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0
- ``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave
- this field to 0, or fill it in according to the CEC 2.0 guidelines to
- give the CEC framework more information about the device type, even
- though the framework won't use it directly in the CEC message.
-
- - .. row 11
-
- - __u8
-
- - ``features[CEC_MAX_LOG_ADDRS][12]``
-
- - Features for each logical address. It is used in the CEC 2.0
- ``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the
- RC Profile and the Device Features. For CEC 1.4 you can either leave
- this field to all 0, or fill it in according to the CEC 2.0 guidelines to
- give the CEC framework more information about the device type, even
- though the framework won't use it directly in the CEC message.
+ * - __u8
+ - ``log_addr[CEC_MAX_LOG_ADDRS]``
+ - The actual logical addresses that were claimed. This is set by the
+ driver. If no logical address could be claimed, then it is set to
+ ``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then
+ ``log_addr[0]`` is set to 0xf and all others to
+ ``CEC_LOG_ADDR_INVALID``.
+ * - __u16
+ - ``log_addr_mask``
+ - The bitmask of all logical addresses this adapter has claimed. If
+ this adapter is Unregistered then ``log_addr_mask`` sets bit 15
+ and clears all other bits. If this adapter is not configured at
+ all, then ``log_addr_mask`` is set to 0. Set by the driver.
+ * - __u8
+ - ``cec_version``
+ - The CEC version that this adapter shall use. See
+ :ref:`cec-versions`. Used to implement the
+ ``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages.
+ Note that :ref:`CEC_OP_CEC_VERSION_1_3A <CEC-OP-CEC-VERSION-1-3A>` is not allowed by the CEC
+ framework.
+ * - __u8
+ - ``num_log_addrs``
+ - Number of logical addresses to set up. Must be ≤
+ ``available_log_addrs`` as returned by
+ :ref:`CEC_ADAP_G_CAPS`. All arrays in
+ this structure are only filled up to index
+ ``available_log_addrs``-1. The remaining array elements will be
+ ignored. Note that the CEC 2.0 standard allows for a maximum of 2
+ logical addresses, although some hardware has support for more.
+ ``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual
+ number of logical addresses it could claim, which may be less than
+ what was requested. If this field is set to 0, then the CEC
+ adapter shall clear all claimed logical addresses and all other
+ fields will be ignored.
+ * - __u32
+ - ``vendor_id``
+ - The vendor ID is a 24-bit number that identifies the specific
+ vendor or entity. Based on this ID vendor specific commands may be
+ defined. If you do not want a vendor ID then set it to
+ ``CEC_VENDOR_ID_NONE``.
+ * - __u32
+ - ``flags``
+ - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags.
+ * - char
+ - ``osd_name[15]``
+ - The On-Screen Display name as is returned by the
+ ``CEC_MSG_SET_OSD_NAME`` message.
+ * - __u8
+ - ``primary_device_type[CEC_MAX_LOG_ADDRS]``
+ - Primary device type for each logical address. See
+ :ref:`cec-prim-dev-types` for possible types.
+ * - __u8
+ - ``log_addr_type[CEC_MAX_LOG_ADDRS]``
+ - Logical address types. See :ref:`cec-log-addr-types` for
+ possible types. The driver will update this with the actual
+ logical address type that it claimed (e.g. it may have to fallback
+ to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED <CEC-LOG-ADDR-TYPE-UNREGISTERED>`).
+ * - __u8
+ - ``all_device_types[CEC_MAX_LOG_ADDRS]``
+ - CEC 2.0 specific: the bit mask of all device types. See
+ :ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0
+ ``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave
+ this field to 0, or fill it in according to the CEC 2.0 guidelines to
+ give the CEC framework more information about the device type, even
+ though the framework won't use it directly in the CEC message.
+ * - __u8
+ - ``features[CEC_MAX_LOG_ADDRS][12]``
+ - Features for each logical address. It is used in the CEC 2.0
+ ``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the
+ RC Profile and the Device Features. For CEC 1.4 you can either leave
+ this field to all 0, or fill it in according to the CEC 2.0 guidelines to
+ give the CEC framework more information about the device type, even
+ though the framework won't use it directly in the CEC message.
.. _cec-log-addrs-flags:
:stub-columns: 0
:widths: 3 1 4
+ * .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`:
- - .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`:
-
- - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK``
-
- - 1
-
- - By default if no logical address of the requested type can be claimed, then
- it will go back to the unconfigured state. If this flag is set, then it will
- fallback to the Unregistered logical address. Note that if the Unregistered
- logical address was explicitly requested, then this flag has no effect.
+ - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK``
+ - 1
+ - By default if no logical address of the requested type can be claimed, then
+ it will go back to the unconfigured state. If this flag is set, then it will
+ fallback to the Unregistered logical address. Note that if the Unregistered
+ logical address was explicitly requested, then this flag has no effect.
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
:stub-columns: 0
:widths: 3 1 4
+ * .. _`CEC-OP-CEC-VERSION-1-3A`:
- - .. _`CEC-OP-CEC-VERSION-1-3A`:
-
- - ``CEC_OP_CEC_VERSION_1_3A``
-
- - 4
-
- - CEC version according to the HDMI 1.3a standard.
-
- - .. _`CEC-OP-CEC-VERSION-1-4B`:
+ - ``CEC_OP_CEC_VERSION_1_3A``
+ - 4
+ - CEC version according to the HDMI 1.3a standard.
+ * .. _`CEC-OP-CEC-VERSION-1-4B`:
- - ``CEC_OP_CEC_VERSION_1_4B``
+ - ``CEC_OP_CEC_VERSION_1_4B``
+ - 5
+ - CEC version according to the HDMI 1.4b standard.
+ * .. _`CEC-OP-CEC-VERSION-2-0`:
- - 5
-
- - CEC version according to the HDMI 1.4b standard.
-
- - .. _`CEC-OP-CEC-VERSION-2-0`:
-
- - ``CEC_OP_CEC_VERSION_2_0``
-
- - 6
-
- - CEC version according to the HDMI 2.0 standard.
+ - ``CEC_OP_CEC_VERSION_2_0``
+ - 6
+ - CEC version according to the HDMI 2.0 standard.
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
:stub-columns: 0
:widths: 3 1 4
+ * .. _`CEC-OP-PRIM-DEVTYPE-TV`:
- - .. _`CEC-OP-PRIM-DEVTYPE-TV`:
-
- - ``CEC_OP_PRIM_DEVTYPE_TV``
-
- - 0
+ - ``CEC_OP_PRIM_DEVTYPE_TV``
+ - 0
+ - Use for a TV.
+ * .. _`CEC-OP-PRIM-DEVTYPE-RECORD`:
- - Use for a TV.
+ - ``CEC_OP_PRIM_DEVTYPE_RECORD``
+ - 1
+ - Use for a recording device.
+ * .. _`CEC-OP-PRIM-DEVTYPE-TUNER`:
- - .. _`CEC-OP-PRIM-DEVTYPE-RECORD`:
+ - ``CEC_OP_PRIM_DEVTYPE_TUNER``
+ - 3
+ - Use for a device with a tuner.
+ * .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`:
- - ``CEC_OP_PRIM_DEVTYPE_RECORD``
+ - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK``
+ - 4
+ - Use for a playback device.
+ * .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`:
- - 1
+ - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM``
+ - 5
+ - Use for an audio system (e.g. an audio/video receiver).
+ * .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`:
- - Use for a recording device.
+ - ``CEC_OP_PRIM_DEVTYPE_SWITCH``
+ - 6
+ - Use for a CEC switch.
+ * .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`:
- - .. _`CEC-OP-PRIM-DEVTYPE-TUNER`:
-
- - ``CEC_OP_PRIM_DEVTYPE_TUNER``
-
- - 3
-
- - Use for a device with a tuner.
-
- - .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`:
-
- - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK``
-
- - 4
-
- - Use for a playback device.
-
- - .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`:
-
- - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM``
-
- - 5
-
- - Use for an audio system (e.g. an audio/video receiver).
-
- - .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`:
-
- - ``CEC_OP_PRIM_DEVTYPE_SWITCH``
-
- - 6
-
- - Use for a CEC switch.
-
- - .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`:
-
- - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC``
-
- - 7
-
- - Use for a video processor device.
+ - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC``
+ - 7
+ - Use for a video processor device.
.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
:stub-columns: 0
:widths: 3 1 16
+ * .. _`CEC-LOG-ADDR-TYPE-TV`:
- - .. _`CEC-LOG-ADDR-TYPE-TV`:
-
- - ``CEC_LOG_ADDR_TYPE_TV``
-
- - 0
-
- - Use for a TV.
-
- - .. _`CEC-LOG-ADDR-TYPE-RECORD`:
-
- - ``CEC_LOG_ADDR_TYPE_RECORD``
-
- - 1
-
- - Use for a recording device.
-
- - .. _`CEC-LOG-ADDR-TYPE-TUNER`:
-
- - ``CEC_LOG_ADDR_TYPE_TUNER``
-
- - 2
+ - ``CEC_LOG_ADDR_TYPE_TV``
+ - 0
+ - Use for a TV.
+ * .. _`CEC-LOG-ADDR-TYPE-RECORD`:
- - Use for a tuner device.
+ - ``CEC_LOG_ADDR_TYPE_RECORD``
+ - 1
+ - Use for a recording device.
+ * .. _`CEC-LOG-ADDR-TYPE-TUNER`:
- - .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`:
+ - ``CEC_LOG_ADDR_TYPE_TUNER``
+ - 2
+ - Use for a tuner device.
+ * .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`:
- - ``CEC_LOG_ADDR_TYPE_PLAYBACK``
+ - ``CEC_LOG_ADDR_TYPE_PLAYBACK``
+ - 3
+ - Use for a playback device.
+ * .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`:
- - 3
+ - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM``
+ - 4
+ - Use for an audio system device.
+ * .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`:
- - Use for a playback device.
+ - ``CEC_LOG_ADDR_TYPE_SPECIFIC``
+ - 5
+ - Use for a second TV or for a video processor device.
+ * .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`:
- - .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`:
-
- - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM``
-
- - 4
-
- - Use for an audio system device.
-
- - .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`:
-
- - ``CEC_LOG_ADDR_TYPE_SPECIFIC``
-
- - 5
-
- - Use for a second TV or for a video processor device.
-
- - .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`:
-
- - ``CEC_LOG_ADDR_TYPE_UNREGISTERED``
-
- - 6
-
- - Use this if you just want to remain unregistered. Used for pure
- CEC switches or CDC-only devices (CDC: Capability Discovery and
- Control).
+ - ``CEC_LOG_ADDR_TYPE_UNREGISTERED``
+ - 6
+ - Use this if you just want to remain unregistered. Used for pure
+ CEC switches or CDC-only devices (CDC: Capability Discovery and
+ Control).
:stub-columns: 0
:widths: 3 1 4
+ * .. _`CEC-OP-ALL-DEVTYPE-TV`:
- - .. _`CEC-OP-ALL-DEVTYPE-TV`:
-
- - ``CEC_OP_ALL_DEVTYPE_TV``
-
- - 0x80
-
- - This supports the TV type.
-
- - .. _`CEC-OP-ALL-DEVTYPE-RECORD`:
-
- - ``CEC_OP_ALL_DEVTYPE_RECORD``
-
- - 0x40
-
- - This supports the Recording type.
-
- - .. _`CEC-OP-ALL-DEVTYPE-TUNER`:
-
- - ``CEC_OP_ALL_DEVTYPE_TUNER``
-
- - 0x20
-
- - This supports the Tuner type.
-
- - .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`:
-
- - ``CEC_OP_ALL_DEVTYPE_PLAYBACK``
-
- - 0x10
-
- - This supports the Playback type.
-
- - .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`:
-
- - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM``
-
- - 0x08
+ - ``CEC_OP_ALL_DEVTYPE_TV``
+ - 0x80
+ - This supports the TV type.
+ * .. _`CEC-OP-ALL-DEVTYPE-RECORD`:
- - This supports the Audio System type.
+ - ``CEC_OP_ALL_DEVTYPE_RECORD``
+ - 0x40
+ - This supports the Recording type.
+ * .. _`CEC-OP-ALL-DEVTYPE-TUNER`:
- - .. _`CEC-OP-ALL-DEVTYPE-SWITCH`:
+ - ``CEC_OP_ALL_DEVTYPE_TUNER``
+ - 0x20
+ - This supports the Tuner type.
+ * .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`:
- - ``CEC_OP_ALL_DEVTYPE_SWITCH``
+ - ``CEC_OP_ALL_DEVTYPE_PLAYBACK``
+ - 0x10
+ - This supports the Playback type.
+ * .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`:
- - 0x04
+ - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM``
+ - 0x08
+ - This supports the Audio System type.
+ * .. _`CEC-OP-ALL-DEVTYPE-SWITCH`:
- - This supports the CEC Switch or Video Processing type.
+ - ``CEC_OP_ALL_DEVTYPE_SWITCH``
+ - 0x04
+ - This supports the CEC Switch or Video Processing type.
:stub-columns: 0
:widths: 1 1 8
-
- - .. row 1
-
- - __u16
-
- - ``phys_addr``
-
- - The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no
+ * - __u16
+ - ``phys_addr``
+ - The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no
valid physical address is set.
-
- - .. row 2
-
- - __u16
-
- - ``log_addr_mask``
-
- - The current set of claimed logical addresses. This is 0 if no logical
- addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
- If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
- has the unregistered logical address. In that case all other bits are 0.
+ * - __u16
+ - ``log_addr_mask``
+ - The current set of claimed logical addresses. This is 0 if no logical
+ addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
+ If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
+ has the unregistered logical address. In that case all other bits are 0.
.. c:type:: cec_event_lost_msgs
:stub-columns: 0
:widths: 1 1 16
-
- - .. row 1
-
- - __u32
-
- - ``lost_msgs``
-
- - Set to the number of lost messages since the filehandle was opened
- or since the last time this event was dequeued for this
- filehandle. The messages lost are the oldest messages. So when a
- new message arrives and there is no more room, then the oldest
- message is discarded to make room for the new one. The internal
- size of the message queue guarantees that all messages received in
- the last two seconds will be stored. Since messages should be
- replied to within a second according to the CEC specification,
- this is more than enough.
+ * - __u32
+ - ``lost_msgs``
+ - Set to the number of lost messages since the filehandle was opened
+ or since the last time this event was dequeued for this
+ filehandle. The messages lost are the oldest messages. So when a
+ new message arrives and there is no more room, then the oldest
+ message is discarded to make room for the new one. The internal
+ size of the message queue guarantees that all messages received in
+ the last two seconds will be stored. Since messages should be
+ replied to within a second according to the CEC specification,
+ this is more than enough.
.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{2.5cm}|p{8.8cm}|
:stub-columns: 0
:widths: 1 1 1 8
-
- - .. row 1
-
- - __u64
-
- - ``ts``
-
- - :cspan:`1` Timestamp of the event in ns.
-
- The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
- the same clock from userspace use :c:func:`clock_gettime`.
-
- - .. row 2
-
- - __u32
-
- - ``event``
-
- - :cspan:`1` The CEC event type, see :ref:`cec-events`.
-
- - .. row 3
-
- - __u32
-
- - ``flags``
-
- - :cspan:`1` Event flags, see :ref:`cec-event-flags`.
-
- - .. row 4
-
- - union
-
- - (anonymous)
-
- -
- -
-
- - .. row 5
-
- -
- - struct cec_event_state_change
-
- - ``state_change``
-
- - The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>`
- event.
-
- - .. row 6
-
- -
- - struct cec_event_lost_msgs
-
- - ``lost_msgs``
-
- - The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS <CEC-EVENT-LOST-MSGS>`
- event.
+ * - __u64
+ - ``ts``
+ - :cspan:`1` Timestamp of the event in ns.
+
+ The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
+ the same clock from userspace use :c:func:`clock_gettime`.
+ * - __u32
+ - ``event``
+ - :cspan:`1` The CEC event type, see :ref:`cec-events`.
+ * - __u32
+ - ``flags``
+ - :cspan:`1` Event flags, see :ref:`cec-event-flags`.
+ * - union
+ - (anonymous)
+ -
+ -
+ * -
+ - struct cec_event_state_change
+ - ``state_change``
+ - The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>`
+ event.
+ * -
+ - struct cec_event_lost_msgs
+ - ``lost_msgs``
+ - The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS <CEC-EVENT-LOST-MSGS>`
+ event.
.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
:stub-columns: 0
:widths: 3 1 16
+ * .. _`CEC-EVENT-STATE-CHANGE`:
- - .. _`CEC-EVENT-STATE-CHANGE`:
-
- - ``CEC_EVENT_STATE_CHANGE``
-
- - 1
-
- - Generated when the CEC Adapter's state changes. When open() is
- called an initial event will be generated for that filehandle with
- the CEC Adapter's state at that time.
-
- - .. _`CEC-EVENT-LOST-MSGS`:
+ - ``CEC_EVENT_STATE_CHANGE``
+ - 1
+ - Generated when the CEC Adapter's state changes. When open() is
+ called an initial event will be generated for that filehandle with
+ the CEC Adapter's state at that time.
+ * .. _`CEC-EVENT-LOST-MSGS`:
- - ``CEC_EVENT_LOST_MSGS``
-
- - 2
-
- - Generated if one or more CEC messages were lost because the
- application didn't dequeue CEC messages fast enough.
+ - ``CEC_EVENT_LOST_MSGS``
+ - 2
+ - Generated if one or more CEC messages were lost because the
+ application didn't dequeue CEC messages fast enough.
.. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}|
:stub-columns: 0
:widths: 3 1 8
+ * .. _`CEC-EVENT-FL-INITIAL-VALUE`:
- - .. _`CEC-EVENT-FL-INITIAL-VALUE`:
-
- - ``CEC_EVENT_FL_INITIAL_VALUE``
-
- - 1
-
- - Set for the initial events that are generated when the device is
- opened. See the table above for which events do this. This allows
- applications to learn the initial state of the CEC adapter at
- open() time.
+ - ``CEC_EVENT_FL_INITIAL_VALUE``
+ - 1
+ - Set for the initial events that are generated when the device is
+ opened. See the table above for which events do this. This allows
+ applications to learn the initial state of the CEC adapter at
+ open() time.
:stub-columns: 0
:widths: 3 1 16
-
- - .. _`CEC-MODE-NO-INITIATOR`:
-
- - ``CEC_MODE_NO_INITIATOR``
-
- - 0x0
-
- - This is not an initiator, i.e. it cannot transmit CEC messages or
- make any other changes to the CEC adapter.
-
- - .. _`CEC-MODE-INITIATOR`:
-
- - ``CEC_MODE_INITIATOR``
-
- - 0x1
-
- - This is an initiator (the default when the device is opened) and
- it can transmit CEC messages and make changes to the CEC adapter,
- unless there is an exclusive initiator.
-
- - .. _`CEC-MODE-EXCL-INITIATOR`:
-
- - ``CEC_MODE_EXCL_INITIATOR``
-
- - 0x2
-
- - This is an exclusive initiator and this file descriptor is the
- only one that can transmit CEC messages and make changes to the
- CEC adapter. If someone else is already the exclusive initiator
- then an attempt to become one will return the ``EBUSY`` error code
- error.
+ * .. _`CEC-MODE-NO-INITIATOR`:
+
+ - ``CEC_MODE_NO_INITIATOR``
+ - 0x0
+ - This is not an initiator, i.e. it cannot transmit CEC messages or
+ make any other changes to the CEC adapter.
+ * .. _`CEC-MODE-INITIATOR`:
+
+ - ``CEC_MODE_INITIATOR``
+ - 0x1
+ - This is an initiator (the default when the device is opened) and
+ it can transmit CEC messages and make changes to the CEC adapter,
+ unless there is an exclusive initiator.
+ * .. _`CEC-MODE-EXCL-INITIATOR`:
+
+ - ``CEC_MODE_EXCL_INITIATOR``
+ - 0x2
+ - This is an exclusive initiator and this file descriptor is the
+ only one that can transmit CEC messages and make changes to the
+ CEC adapter. If someone else is already the exclusive initiator
+ then an attempt to become one will return the ``EBUSY`` error code
+ error.
Available follower modes are:
:stub-columns: 0
:widths: 3 1 16
-
- - .. _`CEC-MODE-NO-FOLLOWER`:
-
- - ``CEC_MODE_NO_FOLLOWER``
-
- - 0x00
-
- - This is not a follower (the default when the device is opened).
-
- - .. _`CEC-MODE-FOLLOWER`:
-
- - ``CEC_MODE_FOLLOWER``
-
- - 0x10
-
- - This is a follower and it will receive CEC messages unless there
- is an exclusive follower. You cannot become a follower if
- :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`
- was specified, the ``EINVAL`` error code is returned in that case.
-
- - .. _`CEC-MODE-EXCL-FOLLOWER`:
-
- - ``CEC_MODE_EXCL_FOLLOWER``
-
- - 0x20
-
- - This is an exclusive follower and only this file descriptor will
- receive CEC messages for processing. If someone else is already
- the exclusive follower then an attempt to become one will return
- the ``EBUSY`` error code. You cannot become a follower if
- :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`
- was specified, the ``EINVAL`` error code is returned in that case.
-
- - .. _`CEC-MODE-EXCL-FOLLOWER-PASSTHRU`:
-
- - ``CEC_MODE_EXCL_FOLLOWER_PASSTHRU``
-
- - 0x30
-
- - This is an exclusive follower and only this file descriptor will
- receive CEC messages for processing. In addition it will put the
- CEC device into passthrough mode, allowing the exclusive follower
- to handle most core messages instead of relying on the CEC
- framework for that. If someone else is already the exclusive
- follower then an attempt to become one will return the ``EBUSY`` error
- code. You cannot become a follower if :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>`
- is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` was specified,
- the ``EINVAL`` error code is returned in that case.
-
- - .. _`CEC-MODE-MONITOR`:
-
- - ``CEC_MODE_MONITOR``
-
- - 0xe0
-
- - Put the file descriptor into monitor mode. Can only be used in
- combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise EINVAL error
- code will be returned. In monitor mode all messages this CEC
- device transmits and all messages it receives (both broadcast
- messages and directed messages for one its logical addresses) will
- be reported. This is very useful for debugging. This is only
- allowed if the process has the ``CAP_NET_ADMIN`` capability. If
- that is not set, then the ``EPERM`` error code is returned.
-
- - .. _`CEC-MODE-MONITOR-ALL`:
-
- - ``CEC_MODE_MONITOR_ALL``
-
- - 0xf0
-
- - Put the file descriptor into 'monitor all' mode. Can only be used
- in combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise
- the ``EINVAL`` error code will be returned. In 'monitor all' mode all messages
- this CEC device transmits and all messages it receives, including
- directed messages for other CEC devices will be reported. This is
- very useful for debugging, but not all devices support this. This
- mode requires that the :ref:`CEC_CAP_MONITOR_ALL <CEC-CAP-MONITOR-ALL>` capability is set,
- otherwise the ``EINVAL`` error code is returned. This is only allowed if
- the process has the ``CAP_NET_ADMIN`` capability. If that is not
- set, then the ``EPERM`` error code is returned.
+ * .. _`CEC-MODE-NO-FOLLOWER`:
+
+ - ``CEC_MODE_NO_FOLLOWER``
+ - 0x00
+ - This is not a follower (the default when the device is opened).
+ * .. _`CEC-MODE-FOLLOWER`:
+
+ - ``CEC_MODE_FOLLOWER``
+ - 0x10
+ - This is a follower and it will receive CEC messages unless there
+ is an exclusive follower. You cannot become a follower if
+ :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`
+ was specified, the ``EINVAL`` error code is returned in that case.
+ * .. _`CEC-MODE-EXCL-FOLLOWER`:
+
+ - ``CEC_MODE_EXCL_FOLLOWER``
+ - 0x20
+ - This is an exclusive follower and only this file descriptor will
+ receive CEC messages for processing. If someone else is already
+ the exclusive follower then an attempt to become one will return
+ the ``EBUSY`` error code. You cannot become a follower if
+ :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`
+ was specified, the ``EINVAL`` error code is returned in that case.
+ * .. _`CEC-MODE-EXCL-FOLLOWER-PASSTHRU`:
+
+ - ``CEC_MODE_EXCL_FOLLOWER_PASSTHRU``
+ - 0x30
+ - This is an exclusive follower and only this file descriptor will
+ receive CEC messages for processing. In addition it will put the
+ CEC device into passthrough mode, allowing the exclusive follower
+ to handle most core messages instead of relying on the CEC
+ framework for that. If someone else is already the exclusive
+ follower then an attempt to become one will return the ``EBUSY`` error
+ code. You cannot become a follower if :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>`
+ is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` was specified,
+ the ``EINVAL`` error code is returned in that case.
+ * .. _`CEC-MODE-MONITOR`:
+
+ - ``CEC_MODE_MONITOR``
+ - 0xe0
+ - Put the file descriptor into monitor mode. Can only be used in
+ combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise EINVAL error
+ code will be returned. In monitor mode all messages this CEC
+ device transmits and all messages it receives (both broadcast
+ messages and directed messages for one its logical addresses) will
+ be reported. This is very useful for debugging. This is only
+ allowed if the process has the ``CAP_NET_ADMIN`` capability. If
+ that is not set, then the ``EPERM`` error code is returned.
+ * .. _`CEC-MODE-MONITOR-ALL`:
+
+ - ``CEC_MODE_MONITOR_ALL``
+ - 0xf0
+ - Put the file descriptor into 'monitor all' mode. Can only be used
+ in combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise
+ the ``EINVAL`` error code will be returned. In 'monitor all' mode all messages
+ this CEC device transmits and all messages it receives, including
+ directed messages for other CEC devices will be reported. This is
+ very useful for debugging, but not all devices support this. This
+ mode requires that the :ref:`CEC_CAP_MONITOR_ALL <CEC-CAP-MONITOR-ALL>` capability is set,
+ otherwise the ``EINVAL`` error code is returned. This is only allowed if
+ the process has the ``CAP_NET_ADMIN`` capability. If that is not
+ set, then the ``EPERM`` error code is returned.
Core message processing details:
:stub-columns: 0
:widths: 1 8
-
- - .. _`CEC-MSG-GET-CEC-VERSION`:
-
- - ``CEC_MSG_GET_CEC_VERSION``
-
- - When in passthrough mode this message has to be handled by
- userspace, otherwise the core will return the CEC version that was
- set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`.
-
- - .. _`CEC-MSG-GIVE-DEVICE-VENDOR-ID`:
-
- - ``CEC_MSG_GIVE_DEVICE_VENDOR_ID``
-
- - When in passthrough mode this message has to be handled by
- userspace, otherwise the core will return the vendor ID that was
- set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`.
-
- - .. _`CEC-MSG-ABORT`:
-
- - ``CEC_MSG_ABORT``
-
- - When in passthrough mode this message has to be handled by
- userspace, otherwise the core will return a feature refused
- message as per the specification.
-
- - .. _`CEC-MSG-GIVE-PHYSICAL-ADDR`:
-
- - ``CEC_MSG_GIVE_PHYSICAL_ADDR``
-
- - When in passthrough mode this message has to be handled by
- userspace, otherwise the core will report the current physical
- address.
-
- - .. _`CEC-MSG-GIVE-OSD-NAME`:
-
- - ``CEC_MSG_GIVE_OSD_NAME``
-
- - When in passthrough mode this message has to be handled by
- userspace, otherwise the core will report the current OSD name as
- was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`.
-
- - .. _`CEC-MSG-GIVE-FEATURES`:
-
- - ``CEC_MSG_GIVE_FEATURES``
-
- - When in passthrough mode this message has to be handled by
- userspace, otherwise the core will report the current features as
- was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
- or the message is ignored if the CEC version was older than 2.0.
-
- - .. _`CEC-MSG-USER-CONTROL-PRESSED`:
-
- - ``CEC_MSG_USER_CONTROL_PRESSED``
-
- - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key
- press. This message is always passed on to userspace.
-
- - .. _`CEC-MSG-USER-CONTROL-RELEASED`:
-
- - ``CEC_MSG_USER_CONTROL_RELEASED``
-
- - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key
- release. This message is always passed on to userspace.
-
- - .. _`CEC-MSG-REPORT-PHYSICAL-ADDR`:
-
- - ``CEC_MSG_REPORT_PHYSICAL_ADDR``
-
- - The CEC framework will make note of the reported physical address
- and then just pass the message on to userspace.
+ * .. _`CEC-MSG-GET-CEC-VERSION`:
+
+ - ``CEC_MSG_GET_CEC_VERSION``
+ - When in passthrough mode this message has to be handled by
+ userspace, otherwise the core will return the CEC version that was
+ set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`.
+ * .. _`CEC-MSG-GIVE-DEVICE-VENDOR-ID`:
+
+ - ``CEC_MSG_GIVE_DEVICE_VENDOR_ID``
+ - When in passthrough mode this message has to be handled by
+ userspace, otherwise the core will return the vendor ID that was
+ set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`.
+ * .. _`CEC-MSG-ABORT`:
+
+ - ``CEC_MSG_ABORT``
+ - When in passthrough mode this message has to be handled by
+ userspace, otherwise the core will return a feature refused
+ message as per the specification.
+ * .. _`CEC-MSG-GIVE-PHYSICAL-ADDR`:
+
+ - ``CEC_MSG_GIVE_PHYSICAL_ADDR``
+ - When in passthrough mode this message has to be handled by
+ userspace, otherwise the core will report the current physical
+ address.
+ * .. _`CEC-MSG-GIVE-OSD-NAME`:
+
+ - ``CEC_MSG_GIVE_OSD_NAME``
+ - When in passthrough mode this message has to be handled by
+ userspace, otherwise the core will report the current OSD name as
+ was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`.
+ * .. _`CEC-MSG-GIVE-FEATURES`:
+
+ - ``CEC_MSG_GIVE_FEATURES``
+ - When in passthrough mode this message has to be handled by
+ userspace, otherwise the core will report the current features as
+ was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
+ or the message is ignored if the CEC version was older than 2.0.
+ * .. _`CEC-MSG-USER-CONTROL-PRESSED`:
+
+ - ``CEC_MSG_USER_CONTROL_PRESSED``
+ - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key
+ press. This message is always passed on to userspace.
+ * .. _`CEC-MSG-USER-CONTROL-RELEASED`:
+
+ - ``CEC_MSG_USER_CONTROL_RELEASED``
+ - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key
+ release. This message is always passed on to userspace.
+ * .. _`CEC-MSG-REPORT-PHYSICAL-ADDR`:
+
+ - ``CEC_MSG_REPORT_PHYSICAL_ADDR``
+ - The CEC framework will make note of the reported physical address
+ and then just pass the message on to userspace.
:stub-columns: 0
:widths: 1 1 16
-
- - .. row 1
-
- - __u64
-
- - ``tx_ts``
-
- - Timestamp in ns of when the last byte of the message was transmitted.
- The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
- the same clock from userspace use :c:func:`clock_gettime`.
-
- - .. row 2
-
- - __u64
-
- - ``rx_ts``
-
- - Timestamp in ns of when the last byte of the message was received.
- The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
- the same clock from userspace use :c:func:`clock_gettime`.
-
- - .. row 3
-
- - __u32
-
- - ``len``
-
- - The length of the message. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in
- by the application. The driver will fill this in for
- :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be
- filled in by the driver with the length of the reply message if ``reply`` was set.
-
- - .. row 4
-
- - __u32
-
- - ``timeout``
-
- - The timeout in milliseconds. This is the time the device will wait
- for a message to be received before timing out. If it is set to 0,
- then it will wait indefinitely when it is called by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
- If it is 0 and it is called by :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`,
- then it will be replaced by 1000 if the ``reply`` is non-zero or
- ignored if ``reply`` is 0.
-
- - .. row 5
-
- - __u32
-
- - ``sequence``
-
- - A non-zero sequence number is automatically assigned by the CEC framework
- for all transmitted messages. It is used by the CEC framework when it queues
- the transmit result (when transmit was called in non-blocking mode). This
- allows the application to associate the received message with the original
- transmit.
-
- - .. row 6
-
- - __u32
-
- - ``flags``
-
- - Flags. No flags are defined yet, so set this to 0.
-
- - .. row 7
-
- - __u8
-
- - ``tx_status``
-
- - The status bits of the transmitted message. See
- :ref:`cec-tx-status` for the possible status values. It is 0 if
- this messages was received, not transmitted.
-
- - .. row 8
-
- - __u8
-
- - ``msg[16]``
-
- - The message payload. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in by the
- application. The driver will fill this in for :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
- For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be filled in by the driver with
- the payload of the reply message if ``timeout`` was set.
-
- - .. row 8
-
- - __u8
-
- - ``reply``
-
- - Wait until this message is replied. If ``reply`` is 0 and the
- ``timeout`` is 0, then don't wait for a reply but return after
- transmitting the message. Ignored by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
- The case where ``reply`` is 0 (this is the opcode for the Feature Abort
- message) and ``timeout`` is non-zero is specifically allowed to make it
- possible to send a message and wait up to ``timeout`` milliseconds for a
- Feature Abort reply. In this case ``rx_status`` will either be set
- to :ref:`CEC_RX_STATUS_TIMEOUT <CEC-RX-STATUS-TIMEOUT>` or
- :ref:`CEC_RX_STATUS_FEATURE_ABORT <CEC-RX-STATUS-FEATURE-ABORT>`.
-
- - .. row 9
-
- - __u8
-
- - ``rx_status``
-
- - The status bits of the received message. See
- :ref:`cec-rx-status` for the possible status values. It is 0 if
- this message was transmitted, not received, unless this is the
- reply to a transmitted message. In that case both ``rx_status``
- and ``tx_status`` are set.
-
- - .. row 10
-
- - __u8
-
- - ``tx_status``
-
- - The status bits of the transmitted message. See
- :ref:`cec-tx-status` for the possible status values. It is 0 if
- this messages was received, not transmitted.
-
- - .. row 11
-
- - __u8
-
- - ``tx_arb_lost_cnt``
-
- - A counter of the number of transmit attempts that resulted in the
- Arbitration Lost error. This is only set if the hardware supports
- this, otherwise it is always 0. This counter is only valid if the
- :ref:`CEC_TX_STATUS_ARB_LOST <CEC-TX-STATUS-ARB-LOST>` status bit is set.
-
- - .. row 12
-
- - __u8
-
- - ``tx_nack_cnt``
-
- - A counter of the number of transmit attempts that resulted in the
- Not Acknowledged error. This is only set if the hardware supports
- this, otherwise it is always 0. This counter is only valid if the
- :ref:`CEC_TX_STATUS_NACK <CEC-TX-STATUS-NACK>` status bit is set.
-
- - .. row 13
-
- - __u8
-
- - ``tx_low_drive_cnt``
-
- - A counter of the number of transmit attempts that resulted in the
- Arbitration Lost error. This is only set if the hardware supports
- this, otherwise it is always 0. This counter is only valid if the
- :ref:`CEC_TX_STATUS_LOW_DRIVE <CEC-TX-STATUS-LOW-DRIVE>` status bit is set.
-
- - .. row 14
-
- - __u8
-
- - ``tx_error_cnt``
-
- - A counter of the number of transmit errors other than Arbitration
- Lost or Not Acknowledged. This is only set if the hardware
- supports this, otherwise it is always 0. This counter is only
- valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set.
+ * - __u64
+ - ``tx_ts``
+ - Timestamp in ns of when the last byte of the message was transmitted.
+ The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
+ the same clock from userspace use :c:func:`clock_gettime`.
+ * - __u64
+ - ``rx_ts``
+ - Timestamp in ns of when the last byte of the message was received.
+ The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access
+ the same clock from userspace use :c:func:`clock_gettime`.
+ * - __u32
+ - ``len``
+ - The length of the message. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in
+ by the application. The driver will fill this in for
+ :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be
+ filled in by the driver with the length of the reply message if ``reply`` was set.
+ * - __u32
+ - ``timeout``
+ - The timeout in milliseconds. This is the time the device will wait
+ for a message to be received before timing out. If it is set to 0,
+ then it will wait indefinitely when it is called by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
+ If it is 0 and it is called by :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`,
+ then it will be replaced by 1000 if the ``reply`` is non-zero or
+ ignored if ``reply`` is 0.
+ * - __u32
+ - ``sequence``
+ - A non-zero sequence number is automatically assigned by the CEC framework
+ for all transmitted messages. It is used by the CEC framework when it queues
+ the transmit result (when transmit was called in non-blocking mode). This
+ allows the application to associate the received message with the original
+ transmit.
+ * - __u32
+ - ``flags``
+ - Flags. No flags are defined yet, so set this to 0.
+ * - __u8
+ - ``tx_status``
+ - The status bits of the transmitted message. See
+ :ref:`cec-tx-status` for the possible status values. It is 0 if
+ this messages was received, not transmitted.
+ * - __u8
+ - ``msg[16]``
+ - The message payload. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in by the
+ application. The driver will fill this in for :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
+ For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be filled in by the driver with
+ the payload of the reply message if ``timeout`` was set.
+ * - __u8
+ - ``reply``
+ - Wait until this message is replied. If ``reply`` is 0 and the
+ ``timeout`` is 0, then don't wait for a reply but return after
+ transmitting the message. Ignored by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
+ The case where ``reply`` is 0 (this is the opcode for the Feature Abort
+ message) and ``timeout`` is non-zero is specifically allowed to make it
+ possible to send a message and wait up to ``timeout`` milliseconds for a
+ Feature Abort reply. In this case ``rx_status`` will either be set
+ to :ref:`CEC_RX_STATUS_TIMEOUT <CEC-RX-STATUS-TIMEOUT>` or
+ :ref:`CEC_RX_STATUS_FEATURE_ABORT <CEC-RX-STATUS-FEATURE-ABORT>`.
+ * - __u8
+ - ``rx_status``
+ - The status bits of the received message. See
+ :ref:`cec-rx-status` for the possible status values. It is 0 if
+ this message was transmitted, not received, unless this is the
+ reply to a transmitted message. In that case both ``rx_status``
+ and ``tx_status`` are set.
+ * - __u8
+ - ``tx_status``
+ - The status bits of the transmitted message. See
+ :ref:`cec-tx-status` for the possible status values. It is 0 if
+ this messages was received, not transmitted.
+ * - __u8
+ - ``tx_arb_lost_cnt``
+ - A counter of the number of transmit attempts that resulted in the
+ Arbitration Lost error. This is only set if the hardware supports
+ this, otherwise it is always 0. This counter is only valid if the
+ :ref:`CEC_TX_STATUS_ARB_LOST <CEC-TX-STATUS-ARB-LOST>` status bit is set.
+ * - __u8
+ - ``tx_nack_cnt``
+ - A counter of the number of transmit attempts that resulted in the
+ Not Acknowledged error. This is only set if the hardware supports
+ this, otherwise it is always 0. This counter is only valid if the
+ :ref:`CEC_TX_STATUS_NACK <CEC-TX-STATUS-NACK>` status bit is set.
+ * - __u8
+ - ``tx_low_drive_cnt``
+ - A counter of the number of transmit attempts that resulted in the
+ Arbitration Lost error. This is only set if the hardware supports
+ this, otherwise it is always 0. This counter is only valid if the
+ :ref:`CEC_TX_STATUS_LOW_DRIVE <CEC-TX-STATUS-LOW-DRIVE>` status bit is set.
+ * - __u8
+ - ``tx_error_cnt``
+ - A counter of the number of transmit errors other than Arbitration
+ Lost or Not Acknowledged. This is only set if the hardware
+ supports this, otherwise it is always 0. This counter is only
+ valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set.
.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
:stub-columns: 0
:widths: 3 1 16
-
- - .. _`CEC-TX-STATUS-OK`:
-
- - ``CEC_TX_STATUS_OK``
-
- - 0x01
-
- - The message was transmitted successfully. This is mutually
- exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES <CEC-TX-STATUS-MAX-RETRIES>`. Other bits can still
- be set if earlier attempts met with failure before the transmit
- was eventually successful.
-
- - .. _`CEC-TX-STATUS-ARB-LOST`:
-
- - ``CEC_TX_STATUS_ARB_LOST``
-
- - 0x02
-
- - CEC line arbitration was lost.
-
- - .. _`CEC-TX-STATUS-NACK`:
-
- - ``CEC_TX_STATUS_NACK``
-
- - 0x04
-
- - Message was not acknowledged.
-
- - .. _`CEC-TX-STATUS-LOW-DRIVE`:
-
- - ``CEC_TX_STATUS_LOW_DRIVE``
-
- - 0x08
-
- - Low drive was detected on the CEC bus. This indicates that a
- follower detected an error on the bus and requests a
- retransmission.
-
- - .. _`CEC-TX-STATUS-ERROR`:
-
- - ``CEC_TX_STATUS_ERROR``
-
- - 0x10
-
- - Some error occurred. This is used for any errors that do not fit
- the previous two, either because the hardware could not tell which
- error occurred, or because the hardware tested for other
- conditions besides those two.
-
- - .. _`CEC-TX-STATUS-MAX-RETRIES`:
-
- - ``CEC_TX_STATUS_MAX_RETRIES``
-
- - 0x20
-
- - The transmit failed after one or more retries. This status bit is
- mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`. Other bits can still
- be set to explain which failures were seen.
+ * .. _`CEC-TX-STATUS-OK`:
+
+ - ``CEC_TX_STATUS_OK``
+ - 0x01
+ - The message was transmitted successfully. This is mutually
+ exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES <CEC-TX-STATUS-MAX-RETRIES>`. Other bits can still
+ be set if earlier attempts met with failure before the transmit
+ was eventually successful.
+ * .. _`CEC-TX-STATUS-ARB-LOST`:
+
+ - ``CEC_TX_STATUS_ARB_LOST``
+ - 0x02
+ - CEC line arbitration was lost.
+ * .. _`CEC-TX-STATUS-NACK`:
+
+ - ``CEC_TX_STATUS_NACK``
+ - 0x04
+ - Message was not acknowledged.
+ * .. _`CEC-TX-STATUS-LOW-DRIVE`:
+
+ - ``CEC_TX_STATUS_LOW_DRIVE``
+ - 0x08
+ - Low drive was detected on the CEC bus. This indicates that a
+ follower detected an error on the bus and requests a
+ retransmission.
+ * .. _`CEC-TX-STATUS-ERROR`:
+
+ - ``CEC_TX_STATUS_ERROR``
+ - 0x10
+ - Some error occurred. This is used for any errors that do not fit
+ the previous two, either because the hardware could not tell which
+ error occurred, or because the hardware tested for other
+ conditions besides those two.
+ * .. _`CEC-TX-STATUS-MAX-RETRIES`:
+
+ - ``CEC_TX_STATUS_MAX_RETRIES``
+ - 0x20
+ - The transmit failed after one or more retries. This status bit is
+ mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`. Other bits can still
+ be set to explain which failures were seen.
.. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
:stub-columns: 0
:widths: 3 1 16
+ * .. _`CEC-RX-STATUS-OK`:
- - .. _`CEC-RX-STATUS-OK`:
-
- - ``CEC_RX_STATUS_OK``
-
- - 0x01
-
- - The message was received successfully.
-
- - .. _`CEC-RX-STATUS-TIMEOUT`:
-
- - ``CEC_RX_STATUS_TIMEOUT``
-
- - 0x02
-
- - The reply to an earlier transmitted message timed out.
-
- - .. _`CEC-RX-STATUS-FEATURE-ABORT`:
-
- - ``CEC_RX_STATUS_FEATURE_ABORT``
+ - ``CEC_RX_STATUS_OK``
+ - 0x01
+ - The message was received successfully.
+ * .. _`CEC-RX-STATUS-TIMEOUT`:
- - 0x04
+ - ``CEC_RX_STATUS_TIMEOUT``
+ - 0x02
+ - The reply to an earlier transmitted message timed out.
+ * .. _`CEC-RX-STATUS-FEATURE-ABORT`:
- - The message was received successfully but the reply was
- ``CEC_MSG_FEATURE_ABORT``. This status is only set if this message
- was the reply to an earlier transmitted message.
+ - ``CEC_RX_STATUS_FEATURE_ABORT``
+ - 0x04
+ - The message was received successfully but the reply was
+ ``CEC_MSG_FEATURE_ABORT``. This status is only set if this message
+ was the reply to an earlier transmitted message.
projects / platform / kernel / linux-rpi.git / commitdiff