hwmon: (nct6775) Add support for pwm, pwm_mode, and pwm_enable
authorGuenter Roeck <linux@roeck-us.net>
Tue, 4 Dec 2012 16:30:54 +0000 (08:30 -0800)
committerGuenter Roeck <linux@roeck-us.net>
Mon, 8 Apr 2013 04:16:39 +0000 (21:16 -0700)
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Documentation/hwmon/nct6775
drivers/hwmon/nct6775.c

index dcd56a3..7c9f1d3 100644 (file)
@@ -69,6 +69,24 @@ is driven slower/faster to reach the predefined range again.
 
 The mode works for fan1-fan5.
 
+sysfs attributes
+----------------
+
+pwm[1-5] - this file stores PWM duty cycle or DC value (fan speed) in range:
+          0 (lowest speed) to 255 (full)
+
+pwm[1-5]_enable - this file controls mode of fan/temperature control:
+       * 0 Fan control disabled (fans set to maximum speed)
+       * 1 Manual mode, write to pwm[0-5] any value 0-255
+       * 2 "Thermal Cruise" mode
+       * 3 "Fan Speed Cruise" mode
+       * 4 "Smart Fan III" mode (NCT6775F only)
+       * 5 "Smart Fan IV" mode
+
+pwm[1-5]_mode - controls if output is PWM or DC level
+        * 0 DC output
+        * 1 PWM output
+
 Usage Notes
 -----------
 
index 56d7652..ad4ecc0 100644 (file)
@@ -96,6 +96,8 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
 #define SIO_NCT6779_ID         0xc560
 #define SIO_ID_MASK            0xFFF0
 
+enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
+
 static inline void
 superio_outb(int ioreg, int reg, int val)
 {
@@ -209,6 +211,15 @@ static const s8 NCT6775_ALARM_BITS[] = {
 static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee };
 static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 };
 
+/* DC or PWM output fan configuration */
+static const u8 NCT6775_REG_PWM_MODE[] = { 0x04, 0x04, 0x12 };
+static const u8 NCT6775_PWM_MODE_MASK[] = { 0x01, 0x02, 0x01 };
+
+static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302, 0x802, 0x902 };
+
+static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309, 0x809, 0x909 };
+static const u16 NCT6775_REG_PWM_READ[] = { 0x01, 0x03, 0x11, 0x13, 0x15 };
+
 static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 };
 static const u16 NCT6775_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d };
 static const u16 NCT6775_REG_FAN_PULSES[] = { 0x641, 0x642, 0x643, 0x644, 0 };
@@ -270,6 +281,9 @@ static const s8 NCT6776_ALARM_BITS[] = {
        4, 5, 13, -1, -1, -1,           /* temp1..temp6 */
        12, 9 };                        /* intrusion0, intrusion1 */
 
+static const u8 NCT6776_REG_PWM_MODE[] = { 0x04, 0, 0 };
+static const u8 NCT6776_PWM_MODE_MASK[] = { 0x01, 0, 0 };
+
 static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642 };
 static const u16 NCT6776_REG_FAN_PULSES[] = { 0x644, 0x645, 0x646, 0, 0 };
 
@@ -380,6 +394,20 @@ static const u16 NCT6779_REG_TEMP_ALTERNATE[ARRAY_SIZE(nct6779_temp_label) - 1]
 static const u16 NCT6779_REG_TEMP_CRIT[ARRAY_SIZE(nct6779_temp_label) - 1]
        = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x709, 0x70a };
 
+static enum pwm_enable reg_to_pwm_enable(int pwm, int mode)
+{
+       if (mode == 0 && pwm == 255)
+               return off;
+       return mode + 1;
+}
+
+static int pwm_enable_to_reg(enum pwm_enable mode)
+{
+       if (mode == off)
+               return 0;
+       return mode - 1;
+}
+
 /*
  * Conversions
  */
@@ -471,9 +499,16 @@ struct nct6775_data {
        const u16 *REG_IN_MINMAX[2];
 
        const u16 *REG_FAN;
+       const u16 *REG_FAN_MODE;
        const u16 *REG_FAN_MIN;
        const u16 *REG_FAN_PULSES;
 
+       const u8 *REG_PWM_MODE;
+       const u8 *PWM_MODE_MASK;
+
+       const u16 *REG_PWM[1];  /* [0]=pwm */
+       const u16 *REG_PWM_READ;
+
        const u16 *REG_TEMP_SOURCE;     /* temp register sources */
        const u16 *REG_TEMP_OFFSET;
 
@@ -494,6 +529,7 @@ struct nct6775_data {
        u16 fan_min[5];
        u8 fan_pulses[5];
        u8 fan_div[5];
+       u8 has_pwm;
        u8 has_fan;             /* some fan inputs can be disabled */
        u8 has_fan_min;         /* some fans don't have min register */
        bool has_fan_div;
@@ -505,6 +541,18 @@ struct nct6775_data {
                                * 3=temp_crit */
        u64 alarms;
 
+       u8 pwm_num;     /* number of pwm */
+       u8 pwm_mode[5]; /* 1->DC variable voltage, 0->PWM variable duty cycle */
+       enum pwm_enable pwm_enable[5];
+                       /* 0->off
+                        * 1->manual
+                        * 2->thermal cruise mode (also called SmartFan I)
+                        * 3->fan speed cruise mode
+                        * 4->SmartFan III
+                        * 5->enhanced variable thermal cruise (SmartFan IV)
+                        */
+       u8 pwm[1][5];   /* [0]=pwm */
+
        u8 vid;
        u8 vrm;
 
@@ -781,6 +829,36 @@ static void nct6775_select_fan_div(struct device *dev,
        }
 }
 
+static void nct6775_update_pwm(struct device *dev)
+{
+       struct nct6775_data *data = dev_get_drvdata(dev);
+       int i, j;
+       int fanmodecfg;
+       bool duty_is_dc;
+
+       for (i = 0; i < data->pwm_num; i++) {
+               if (!(data->has_pwm & (1 << i)))
+                       continue;
+
+               duty_is_dc = data->REG_PWM_MODE[i] &&
+                 (nct6775_read_value(data, data->REG_PWM_MODE[i])
+                  & data->PWM_MODE_MASK[i]);
+               data->pwm_mode[i] = duty_is_dc;
+
+               fanmodecfg = nct6775_read_value(data, data->REG_FAN_MODE[i]);
+               for (j = 0; j < ARRAY_SIZE(data->REG_PWM); j++) {
+                       if (data->REG_PWM[j] && data->REG_PWM[j][i]) {
+                               data->pwm[j][i]
+                                 = nct6775_read_value(data,
+                                                      data->REG_PWM[j][i]);
+                       }
+               }
+
+               data->pwm_enable[i] = reg_to_pwm_enable(data->pwm[0][i],
+                                                       (fanmodecfg >> 4) & 7);
+       }
+}
+
 static struct nct6775_data *nct6775_update_device(struct device *dev)
 {
        struct nct6775_data *data = dev_get_drvdata(dev);
@@ -826,6 +904,8 @@ static struct nct6775_data *nct6775_update_device(struct device *dev)
                        nct6775_select_fan_div(dev, data, i, reg);
                }
 
+               nct6775_update_pwm(dev);
+
                /* Measured temperatures and limits */
                for (i = 0; i < NUM_TEMP; i++) {
                        if (!(data->have_temp & (1 << i)))
@@ -1600,6 +1680,170 @@ static struct sensor_device_attribute sda_temp_alarm[] = {
 #define NUM_TEMP_ALARM ARRAY_SIZE(sda_temp_alarm)
 
 static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+       struct nct6775_data *data = nct6775_update_device(dev);
+       struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+
+       return sprintf(buf, "%d\n", !data->pwm_mode[sattr->index]);
+}
+
+static ssize_t
+store_pwm_mode(struct device *dev, struct device_attribute *attr,
+              const char *buf, size_t count)
+{
+       struct nct6775_data *data = dev_get_drvdata(dev);
+       struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+       int nr = sattr->index;
+       unsigned long val;
+       int err;
+       u8 reg;
+
+       err = kstrtoul(buf, 10, &val);
+       if (err < 0)
+               return err;
+
+       if (val > 1)
+               return -EINVAL;
+
+       /* Setting DC mode is not supported for all chips/channels */
+       if (data->REG_PWM_MODE[nr] == 0) {
+               if (val)
+                       return -EINVAL;
+               return count;
+       }
+
+       mutex_lock(&data->update_lock);
+       data->pwm_mode[nr] = val;
+       reg = nct6775_read_value(data, data->REG_PWM_MODE[nr]);
+       reg &= ~data->PWM_MODE_MASK[nr];
+       if (val)
+               reg |= data->PWM_MODE_MASK[nr];
+       nct6775_write_value(data, data->REG_PWM_MODE[nr], reg);
+       mutex_unlock(&data->update_lock);
+       return count;
+}
+
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+       struct nct6775_data *data = nct6775_update_device(dev);
+       struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+       int nr = sattr->nr;
+       int index = sattr->index;
+       int pwm;
+
+       /*
+        * For automatic fan control modes, show current pwm readings.
+        * Otherwise, show the configured value.
+        */
+       if (index == 0 && data->pwm_enable[nr] > manual)
+               pwm = nct6775_read_value(data, data->REG_PWM_READ[nr]);
+       else
+               pwm = data->pwm[index][nr];
+
+       return sprintf(buf, "%d\n", pwm);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr, const char *buf,
+         size_t count)
+{
+       struct nct6775_data *data = dev_get_drvdata(dev);
+       struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+       int nr = sattr->nr;
+       int index = sattr->index;
+       unsigned long val;
+       int err;
+
+       err = kstrtoul(buf, 10, &val);
+       if (err < 0)
+               return err;
+       val = clamp_val(val, 0, 255);
+
+       mutex_lock(&data->update_lock);
+       data->pwm[index][nr] = val;
+       nct6775_write_value(data, data->REG_PWM[index][nr], val);
+       mutex_unlock(&data->update_lock);
+       return count;
+}
+
+static ssize_t
+show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+       struct nct6775_data *data = nct6775_update_device(dev);
+       struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+
+       return sprintf(buf, "%d\n", data->pwm_enable[sattr->index]);
+}
+
+static ssize_t
+store_pwm_enable(struct device *dev, struct device_attribute *attr,
+                const char *buf, size_t count)
+{
+       struct nct6775_data *data = dev_get_drvdata(dev);
+       struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+       int nr = sattr->index;
+       unsigned long val;
+       int err;
+       u16 reg;
+
+       err = kstrtoul(buf, 10, &val);
+       if (err < 0)
+               return err;
+
+       if (val > sf4)
+               return -EINVAL;
+
+       if (val == sf3 && data->kind != nct6775)
+               return -EINVAL;
+
+       mutex_lock(&data->update_lock);
+       data->pwm_enable[nr] = val;
+       if (val == off) {
+               /*
+                * turn off pwm control: select manual mode, set pwm to maximum
+                */
+               data->pwm[0][nr] = 255;
+               nct6775_write_value(data, data->REG_PWM[0][nr], 255);
+       }
+       reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]);
+       reg &= 0x0f;
+       reg |= pwm_enable_to_reg(val) << 4;
+       nct6775_write_value(data, data->REG_FAN_MODE[nr], reg);
+       mutex_unlock(&data->update_lock);
+       return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3, 0);
+static SENSOR_DEVICE_ATTR_2(pwm5, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 4, 0);
+
+static SENSOR_DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
+                         store_pwm_mode, 0);
+static SENSOR_DEVICE_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
+                         store_pwm_mode, 1);
+static SENSOR_DEVICE_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
+                         store_pwm_mode, 2);
+static SENSOR_DEVICE_ATTR(pwm4_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
+                         store_pwm_mode, 3);
+static SENSOR_DEVICE_ATTR(pwm5_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
+                         store_pwm_mode, 4);
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+                         store_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+                         store_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+                         store_pwm_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+                         store_pwm_enable, 3);
+static SENSOR_DEVICE_ATTR(pwm5_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+                         store_pwm_enable, 4);
+
+static ssize_t
 show_name(struct device *dev, struct device_attribute *attr, char *buf)
 {
        struct nct6775_data *data = dev_get_drvdata(dev);
@@ -1609,6 +1853,47 @@ show_name(struct device *dev, struct device_attribute *attr, char *buf)
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
+static struct attribute *nct6775_attributes_pwm[5][4] = {
+       {
+               &sensor_dev_attr_pwm1.dev_attr.attr,
+               &sensor_dev_attr_pwm1_mode.dev_attr.attr,
+               &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+               NULL
+       },
+       {
+               &sensor_dev_attr_pwm2.dev_attr.attr,
+               &sensor_dev_attr_pwm2_mode.dev_attr.attr,
+               &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+               NULL
+       },
+       {
+               &sensor_dev_attr_pwm3.dev_attr.attr,
+               &sensor_dev_attr_pwm3_mode.dev_attr.attr,
+               &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+               NULL
+       },
+       {
+               &sensor_dev_attr_pwm4.dev_attr.attr,
+               &sensor_dev_attr_pwm4_mode.dev_attr.attr,
+               &sensor_dev_attr_pwm4_enable.dev_attr.attr,
+               NULL
+       },
+       {
+               &sensor_dev_attr_pwm5.dev_attr.attr,
+               &sensor_dev_attr_pwm5_mode.dev_attr.attr,
+               &sensor_dev_attr_pwm5_enable.dev_attr.attr,
+               NULL
+       },
+};
+
+static const struct attribute_group nct6775_group_pwm[5] = {
+       { .attrs = nct6775_attributes_pwm[0] },
+       { .attrs = nct6775_attributes_pwm[1] },
+       { .attrs = nct6775_attributes_pwm[2] },
+       { .attrs = nct6775_attributes_pwm[3] },
+       { .attrs = nct6775_attributes_pwm[4] },
+};
+
 static ssize_t
 show_vid(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -1681,6 +1966,9 @@ static void nct6775_device_remove_files(struct device *dev)
        int i;
        struct nct6775_data *data = dev_get_drvdata(dev);
 
+       for (i = 0; i < data->pwm_num; i++)
+               sysfs_remove_group(&dev->kobj, &nct6775_group_pwm[i]);
+
        for (i = 0; i < data->in_num; i++)
                sysfs_remove_group(&dev->kobj, &nct6775_group_in[i]);
 
@@ -1763,6 +2051,7 @@ nct6775_check_fan_inputs(const struct nct6775_sio_data *sio_data,
 {
        int regval;
        bool fan3pin, fan3min, fan4pin, fan4min, fan5pin;
+       bool pwm3pin, pwm4pin, pwm5pin;
        int ret;
 
        ret = superio_enter(sio_data->sioreg);
@@ -1775,11 +2064,14 @@ nct6775_check_fan_inputs(const struct nct6775_sio_data *sio_data,
 
                fan3pin = regval & (1 << 6);
                fan3min = fan3pin;
+               pwm3pin = regval & (1 << 7);
 
                /* On NCT6775, fan4 shares pins with the fdc interface */
                fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
                fan4min = 0;
                fan5pin = 0;
+               pwm4pin = 0;
+               pwm5pin = 0;
        } else if (data->kind == nct6776) {
                bool gpok = superio_inb(sio_data->sioreg, 0x27) & 0x80;
 
@@ -1803,6 +2095,9 @@ nct6775_check_fan_inputs(const struct nct6775_sio_data *sio_data,
 
                fan4min = fan4pin;
                fan3min = fan3pin;
+               pwm3pin = fan3pin;
+               pwm4pin = 0;
+               pwm5pin = 0;
        } else {        /* NCT6779D */
                regval = superio_inb(sio_data->sioreg, 0x1c);
 
@@ -1810,6 +2105,10 @@ nct6775_check_fan_inputs(const struct nct6775_sio_data *sio_data,
                fan4pin = !(regval & (1 << 6));
                fan5pin = !(regval & (1 << 7));
 
+               pwm3pin = !(regval & (1 << 0));
+               pwm4pin = !(regval & (1 << 1));
+               pwm5pin = !(regval & (1 << 2));
+
                fan3min = fan3pin;
                fan4min = fan4pin;
        }
@@ -1823,6 +2122,8 @@ nct6775_check_fan_inputs(const struct nct6775_sio_data *sio_data,
        data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
        data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
 
+       data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) | (pwm5pin << 4);
+
        return 0;
 }
 
@@ -1859,6 +2160,7 @@ static int nct6775_probe(struct platform_device *pdev)
        switch (data->kind) {
        case nct6775:
                data->in_num = 9;
+               data->pwm_num = 3;
                data->has_fan_div = true;
                data->temp_fixed_num = 3;
 
@@ -1877,8 +2179,13 @@ static int nct6775_probe(struct platform_device *pdev)
                data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN;
                data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX;
                data->REG_FAN = NCT6775_REG_FAN;
+               data->REG_FAN_MODE = NCT6775_REG_FAN_MODE;
                data->REG_FAN_MIN = NCT6775_REG_FAN_MIN;
                data->REG_FAN_PULSES = NCT6775_REG_FAN_PULSES;
+               data->REG_PWM[0] = NCT6775_REG_PWM;
+               data->REG_PWM_READ = NCT6775_REG_PWM_READ;
+               data->REG_PWM_MODE = NCT6775_REG_PWM_MODE;
+               data->PWM_MODE_MASK = NCT6775_PWM_MODE_MASK;
                data->REG_TEMP_OFFSET = NCT6775_REG_TEMP_OFFSET;
                data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE;
                data->REG_ALARM = NCT6775_REG_ALARM;
@@ -1894,6 +2201,7 @@ static int nct6775_probe(struct platform_device *pdev)
                break;
        case nct6776:
                data->in_num = 9;
+               data->pwm_num = 3;
                data->has_fan_div = false;
                data->temp_fixed_num = 3;
 
@@ -1912,8 +2220,13 @@ static int nct6775_probe(struct platform_device *pdev)
                data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN;
                data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX;
                data->REG_FAN = NCT6775_REG_FAN;
+               data->REG_FAN_MODE = NCT6775_REG_FAN_MODE;
                data->REG_FAN_MIN = NCT6776_REG_FAN_MIN;
                data->REG_FAN_PULSES = NCT6776_REG_FAN_PULSES;
+               data->REG_PWM[0] = NCT6775_REG_PWM;
+               data->REG_PWM_READ = NCT6775_REG_PWM_READ;
+               data->REG_PWM_MODE = NCT6776_REG_PWM_MODE;
+               data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK;
                data->REG_TEMP_OFFSET = NCT6775_REG_TEMP_OFFSET;
                data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE;
                data->REG_ALARM = NCT6775_REG_ALARM;
@@ -1929,6 +2242,7 @@ static int nct6775_probe(struct platform_device *pdev)
                break;
        case nct6779:
                data->in_num = 15;
+               data->pwm_num = 5;
                data->has_fan_div = false;
                data->temp_fixed_num = 6;
 
@@ -1947,8 +2261,13 @@ static int nct6775_probe(struct platform_device *pdev)
                data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN;
                data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX;
                data->REG_FAN = NCT6779_REG_FAN;
+               data->REG_FAN_MODE = NCT6775_REG_FAN_MODE;
                data->REG_FAN_MIN = NCT6776_REG_FAN_MIN;
                data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES;
+               data->REG_PWM[0] = NCT6775_REG_PWM;
+               data->REG_PWM_READ = NCT6775_REG_PWM_READ;
+               data->REG_PWM_MODE = NCT6776_REG_PWM_MODE;
+               data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK;
                data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET;
                data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE;
                data->REG_ALARM = NCT6779_REG_ALARM;
@@ -2157,6 +2476,16 @@ static int nct6775_probe(struct platform_device *pdev)
        /* Read fan clock dividers immediately */
        nct6775_init_fan_common(dev, data);
 
+       /* Register sysfs hooks */
+       for (i = 0; i < data->pwm_num; i++) {
+               if (!(data->has_pwm & (1 << i)))
+                       continue;
+
+               err = sysfs_create_group(&dev->kobj, &nct6775_group_pwm[i]);
+               if (err)
+                       goto exit_remove;
+       }
+
        for (i = 0; i < data->in_num; i++) {
                if (!(data->have_in & (1 << i)))
                        continue;