bpf,x64: use shrx/sarx/shlx when available

BMI2 provides 3 shift instructions (shrx, sarx and shlx) that use VEX
encoding but target general purpose registers [1]. They allow the shift
count in any general purpose register and have the same performance as
non BMI2 shift instructions [2].

Instead of shr/sar/shl that implicitly use %cl (lowest 8 bit of %rcx),
emit their more flexible alternatives provided in BMI2 when advantageous;
keep using the non BMI2 instructions when shift count is already in
BPF_REG_4/%rcx as non BMI2 instructions are shorter.

To summarize, when BMI2 is available:
-------------------------------------------------
            |   arbitrary dst
=================================================
src == ecx  |   shl dst, cl
-------------------------------------------------
src != ecx  |   shlx dst, dst, src
-------------------------------------------------

And no additional register shuffling is needed.

A concrete example between non BMI2 and BMI2 codegen.  To shift %rsi by
%rdi:

Without BMI2:

 ef3:   push   %rcx
        51
 ef4:   mov    %rdi,%rcx
        48 89 f9
 ef7:   shl    %cl,%rsi
        48 d3 e6
 efa:   pop    %rcx
        59

With BMI2:

 f0b:   shlx   %rdi,%rsi,%rsi
        c4 e2 c1 f7 f6

[1] https://en.wikipedia.org/wiki/X86_Bit_manipulation_instruction_set
[2] https://www.agner.org/optimize/instruction_tables.pdf

Signed-off-by: Jie Meng <jmeng@fb.com>
Link: https://lore.kernel.org/r/20221007202348.1118830-3-jmeng@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index d926ca6..d7dd8e0 100644 (file)
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -891,6 +891,65 @@ static void emit_nops(u8 **pprog, int len)
        *pprog = prog;
 }
 
+/* emit the 3-byte VEX prefix
+ *
+ * r: same as rex.r, extra bit for ModRM reg field
+ * x: same as rex.x, extra bit for SIB index field
+ * b: same as rex.b, extra bit for ModRM r/m, or SIB base
+ * m: opcode map select, encoding escape bytes e.g. 0x0f38
+ * w: same as rex.w (32 bit or 64 bit) or opcode specific
+ * src_reg2: additional source reg (encoded as BPF reg)
+ * l: vector length (128 bit or 256 bit) or reserved
+ * pp: opcode prefix (none, 0x66, 0xf2 or 0xf3)
+ */
+static void emit_3vex(u8 **pprog, bool r, bool x, bool b, u8 m,
+                     bool w, u8 src_reg2, bool l, u8 pp)
+{
+       u8 *prog = *pprog;
+       const u8 b0 = 0xc4; /* first byte of 3-byte VEX prefix */
+       u8 b1, b2;
+       u8 vvvv = reg2hex[src_reg2];
+
+       /* reg2hex gives only the lower 3 bit of vvvv */
+       if (is_ereg(src_reg2))
+               vvvv |= 1 << 3;
+
+       /*
+        * 2nd byte of 3-byte VEX prefix
+        * ~ means bit inverted encoding
+        *
+        *    7                           0
+        *  +---+---+---+---+---+---+---+---+
+        *  |~R |~X |~B |         m         |
+        *  +---+---+---+---+---+---+---+---+
+        */
+       b1 = (!r << 7) | (!x << 6) | (!b << 5) | (m & 0x1f);
+       /*
+        * 3rd byte of 3-byte VEX prefix
+        *
+        *    7                           0
+        *  +---+---+---+---+---+---+---+---+
+        *  | W |     ~vvvv     | L |   pp  |
+        *  +---+---+---+---+---+---+---+---+
+        */
+       b2 = (w << 7) | ((~vvvv & 0xf) << 3) | (l << 2) | (pp & 3);
+
+       EMIT3(b0, b1, b2);
+       *pprog = prog;
+}
+
+/* emit BMI2 shift instruction */
+static void emit_shiftx(u8 **pprog, u32 dst_reg, u8 src_reg, bool is64, u8 op)
+{
+       u8 *prog = *pprog;
+       bool r = is_ereg(dst_reg);
+       u8 m = 2; /* escape code 0f38 */
+
+       emit_3vex(&prog, r, false, r, m, is64, src_reg, false, op);
+       EMIT2(0xf7, add_2reg(0xC0, dst_reg, dst_reg));
+       *pprog = prog;
+}
+
 #define INSN_SZ_DIFF (((addrs[i] - addrs[i - 1]) - (prog - temp)))
 
 static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, u8 *rw_image,
@@ -1137,6 +1196,28 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image, u8 *rw_image
                case BPF_ALU64 | BPF_LSH | BPF_X:
                case BPF_ALU64 | BPF_RSH | BPF_X:
                case BPF_ALU64 | BPF_ARSH | BPF_X:
+                       /* BMI2 shifts aren't better when shift count is already in rcx */
+                       if (boot_cpu_has(X86_FEATURE_BMI2) && src_reg != BPF_REG_4) {
+                               /* shrx/sarx/shlx dst_reg, dst_reg, src_reg */
+                               bool w = (BPF_CLASS(insn->code) == BPF_ALU64);
+                               u8 op;
+
+                               switch (BPF_OP(insn->code)) {
+                               case BPF_LSH:
+                                       op = 1; /* prefix 0x66 */
+                                       break;
+                               case BPF_RSH:
+                                       op = 3; /* prefix 0xf2 */
+                                       break;
+                               case BPF_ARSH:
+                                       op = 2; /* prefix 0xf3 */
+                                       break;
+                               }
+
+                               emit_shiftx(&prog, dst_reg, src_reg, w, op);
+
+                               break;
+                       }
 
                        if (src_reg != BPF_REG_4) { /* common case */
                                /* Check for bad case when dst_reg == rcx */