void (*pm_power_off)(void);
EXPORT_SYMBOL_GPL(pm_power_off);
- void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
-static void noinstr __cpu_do_idle(void)
-{
- dsb(sy);
- wfi();
-}
-
-static void noinstr __cpu_do_idle_irqprio(void)
-{
- unsigned long pmr;
- unsigned long daif_bits;
-
- daif_bits = read_sysreg(daif);
- write_sysreg(daif_bits | PSR_I_BIT | PSR_F_BIT, daif);
-
- /*
- * Unmask PMR before going idle to make sure interrupts can
- * be raised.
- */
- pmr = gic_read_pmr();
- gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-
- __cpu_do_idle();
-
- gic_write_pmr(pmr);
- write_sysreg(daif_bits, daif);
-}
-
-/*
- * cpu_do_idle()
- *
- * Idle the processor (wait for interrupt).
- *
- * If the CPU supports priority masking we must do additional work to
- * ensure that interrupts are not masked at the PMR (because the core will
- * not wake up if we block the wake up signal in the interrupt controller).
- */
-void noinstr cpu_do_idle(void)
-{
- if (system_uses_irq_prio_masking())
- __cpu_do_idle_irqprio();
- else
- __cpu_do_idle();
-}
-
-/*
- * This is our default idle handler.
- */
-void noinstr arch_cpu_idle(void)
-{
- /*
- * This should do all the clock switching and wait for interrupt
- * tricks
- */
- cpu_do_idle();
- raw_local_irq_enable();
-}
--
#ifdef CONFIG_HOTPLUG_CPU
void arch_cpu_idle_dead(void)
{