methods {
@property pos {
set {
- /*@
- Set the corner of the bubble
+ [[Set the corner of the bubble
- This function sets the corner of the bubble. The corner will be used to
- determine where the arrow in the frame points to and where label, icon and
- info are shown.
+ This function sets the corner of the bubble. The corner will be used to
+ determine where the arrow in the frame points to and where label, icon and
+ info are shown.
-
- @ingroup Bubble */
+ ]]
}
get {
- /*@
- Get the corner of the bubble
-
- @return The given corner for the bubble.
-
- This function gets the selected corner of the bubble.
+ [[Get the corner of the bubble
- @ingroup Bubble */
+ This function gets the selected corner of the bubble.
+ ]]
}
values {
- pos: Elm.Bubble.Pos; /*@ The given corner for the bubble. */
+ pos: Elm.Bubble.Pos; [[The given corner for the bubble.]]
}
}
}
methods {
@property autorepeat_initial_timeout {
set {
- /*@
- Set the initial timeout before the autorepeat event is generated
+ [[Set the initial timeout before the autorepeat event is generated
- Sets the timeout, in seconds, since the button is pressed until the
- first @c repeated signal is emitted. If @p t is 0.0 or less, there
- won't be any delay and the event will be fired the moment the button is
- pressed.
+ Sets the timeout, in seconds, since the button is pressed until the
+ first $repeated signal is emitted. If $t is 0.0 or less, there
+ won't be any delay and the event will be fired the moment the button is
+ pressed.
- @see elm_button_autorepeat_set()
- @see elm_button_autorepeat_gap_timeout_set()
+ See also @.autorepeat.set,
+ @.autorepeat_gap_timeout.set.
- @ingroup Button */
+ ]]
}
get {
- /*@
- Get the initial timeout before the autorepeat event is generated
+ [[Get the initial timeout before the autorepeat event is generated
- @return Timeout in seconds
+ See also @.autorepeat_initial_timeout.set.
- @see elm_button_autorepeat_initial_timeout_set()
-
- @ingroup Button */
+ ]]
}
values {
- t: double; /*@ Timeout in seconds */
+ t: double; [[Timeout in seconds]]
}
}
@property autorepeat_gap_timeout {
set {
- /*@
- Set the interval between each generated autorepeat event
+ [[Set the interval between each generated autorepeat event
- After the first @c repeated event is fired, all subsequent ones will
- follow after a delay of @p t seconds for each.
+ After the first $repeated event is fired, all subsequent ones will
+ follow after a delay of $t seconds for each.
- @see elm_button_autorepeat_initial_timeout_set()
+ See also @.autorepeat_initial_timeout.set.
- @ingroup Button */
+ ]]
}
get {
- /*@
- Get the interval between each generated autorepeat event
-
- @return Interval in seconds
-
- @ingroup Button */
+ [[Get the interval between each generated autorepeat event]]
}
values {
- t: double; /*@ Interval in seconds */
+ t: double; [[Interval in seconds]]
}
}
@property autorepeat {
set {
- /*@
- Turn on/off the autorepeat event generated when the button is kept pressed
+ [[Turn on/off the autorepeat event generated when the button is kept pressed
- When off, no autorepeat is performed and buttons emit a normal @c clicked
- signal when they are clicked.
+ When off, no autorepeat is performed and buttons emit a normal $clicked
+ signal when they are clicked.
- When on, keeping a button pressed will continuously emit a @c repeated
- signal until the button is released. The time it takes until it starts
- emitting the signal is given by
- elm_button_autorepeat_initial_timeout_set(), and the time between each
- new emission by elm_button_autorepeat_gap_timeout_set().
+ When on, keeping a button pressed will continuously emit a $repeated
+ signal until the button is released. The time it takes until it starts
+ emitting the signal is given by
+ @.autorepeat_initial_timeout.set, and the time between each
+ new emission by @.autorepeat_gap_timeout.set.
- @ingroup Button */
+ ]]
}
get {
- /*@
- Get whether the autorepeat feature is enabled
-
- @return @c EINA_TRUE if autorepeat is on, @c EINA_FALSE otherwise
+ [[Get whether the autorepeat feature is enabled
+ ($true if autorepeat is on, $false otherwise)
- @see elm_button_autorepeat_set()
+ See also @.autorepeat.set.
- @ingroup Button */
+ ]]
}
values {
- on: bool; /*@ A bool to turn on/off the event */
+ on: bool; [[A bool to turn on/off the event]]
}
}
@property admits_autorepeat {
get {
- /*@ Get whether the button supports autorepeat. */
+ [[Get whether the button supports autorepeat.]]
legacy: null;
}
values {