mmc: core: Fix access to HS400-ES devices
authorGuenter Roeck <linux@roeck-us.net>
Wed, 1 Mar 2017 22:11:47 +0000 (14:11 -0800)
committerUlf Hansson <ulf.hansson@linaro.org>
Tue, 14 Mar 2017 16:07:45 +0000 (17:07 +0100)
HS400-ES devices fail to initialize with the following error messages.

mmc1: power class selection to bus width 8 ddr 0 failed
mmc1: error -110 whilst initialising MMC card

This was seen on Samsung Chromebook Plus. Code analysis points to
commit 3d4ef329757c ("mmc: core: fix multi-bit bus width without
high-speed mode"), which attempts to set the bus width for all but
HS200 devices unconditionally. However, for HS400-ES, the bus width
is already selected.

Cc: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Fixes: 3d4ef329757c ("mmc: core: fix multi-bit bus width ...")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chip.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
drivers/mmc/core/mmc.c

index 7fd7228..b502601 100644 (file)
@@ -1730,7 +1730,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
                err = mmc_select_hs400(card);
                if (err)
                        goto free_card;
-       } else {
+       } else if (!mmc_card_hs400es(card)) {
                /* Select the desired bus width optionally */
                err = mmc_select_bus_width(card);
                if (err > 0 && mmc_card_hs(card)) {