Input: usbtouchscreen - don't use DMA on stack

DMA on the stack is not allowed. The buffer must be kmalloced.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 63f9664..3a0a8ca 100644 (file)
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -396,9 +396,12 @@ static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 {
        struct usb_device *dev = usbtouch->udev;
-       int ret;
-       unsigned char buf[2];
+       int ret = -ENOMEM;
+       unsigned char *buf;
 
+       buf = kmalloc(2, GFP_KERNEL);
+       if (!buf)
+               goto err_nobuf;
        /* reset */
        buf[0] = buf[1] = 0xFF;
        ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
@@ -406,9 +409,11 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
                              0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
        if (ret < 0)
-               return ret;
-       if (buf[0] != 0x06 || buf[1] != 0x00)
-               return -ENODEV;
+               goto err_out;
+       if (buf[0] != 0x06 || buf[1] != 0x00) {
+               ret = -ENODEV;
+               goto err_out;
+       }
 
        /* set coordinate output rate */
        buf[0] = buf[1] = 0xFF;
@@ -417,20 +422,22 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
                              TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
        if (ret < 0)
-               return ret;
+               goto err_out;
        if ((buf[0] != 0x06 || buf[1] != 0x00) &&
-           (buf[0] != 0x15 || buf[1] != 0x01))
-               return -ENODEV;
+           (buf[0] != 0x15 || buf[1] != 0x01)) {
+               ret = -ENODEV;
+               goto err_out;
+       }
 
        /* start sending data */
        ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
                              TSC10_CMD_DATA1,
                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
                              0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
-       if (ret < 0)
-               return ret;
-
-       return 0;
+err_out:
+       kfree(buf);
+err_nobuf:
+       return ret;
 }