pinctrl: qcom: spmi-mpp: Fixes related to enable handling
authorBjorn Andersson <bjorn.andersson@sonymobile.com>
Thu, 18 Jun 2015 06:47:26 +0000 (23:47 -0700)
committerLinus Walleij <linus.walleij@linaro.org>
Thu, 16 Jul 2015 07:39:04 +0000 (09:39 +0200)
There's currently no way to re-enable a mpp block once you've entered a state
that disables the state, this patch makes it possible to leave the
bias-high-impedance state.

Also read the enable state from the hardware on probe.

With this in place the is_enabled variable is accurately tracking the state of
the hardware and we can use that for the debug output as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c

index b247a17..6d9abee 100644 (file)
@@ -354,6 +354,9 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
 
        pad = pctldev->desc->pins[pin].drv_data;
 
+       /* Make it possible to enable the pin, by not setting high impedance */
+       pad->is_enabled = true;
+
        for (i = 0; i < nconfs; i++) {
                param = pinconf_to_config_param(configs[i]);
                arg = pinconf_to_config_argument(configs[i]);
@@ -445,7 +448,13 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
        val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
        val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK;
 
-       return pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
+       ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val);
+       if (ret < 0)
+               return ret;
+
+       val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
+
+       return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val);
 }
 
 static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
@@ -453,7 +462,7 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
 {
        struct pmic_mpp_state *state = pinctrl_dev_get_drvdata(pctldev);
        struct pmic_mpp_pad *pad;
-       int ret, val;
+       int ret;
 
        static const char *const biases[] = {
                "0.6kOhm", "10kOhm", "30kOhm", "Disabled"
@@ -464,9 +473,7 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev,
 
        seq_printf(s, " mpp%-2d:", pin + PMIC_MPP_PHYSICAL_OFFSET);
 
-       val = pmic_mpp_read(state, pad, PMIC_MPP_REG_EN_CTL);
-
-       if (val < 0 || !(val >> PMIC_MPP_REG_MASTER_EN_SHIFT)) {
+       if (!pad->is_enabled) {
                seq_puts(s, " ---");
        } else {
 
@@ -706,8 +713,12 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state,
        pad->amux_input = val >> PMIC_MPP_REG_AIN_ROUTE_SHIFT;
        pad->amux_input &= PMIC_MPP_REG_AIN_ROUTE_MASK;
 
-       /* Pin could be disabled with PIN_CONFIG_BIAS_HIGH_IMPEDANCE */
-       pad->is_enabled = true;
+       val = pmic_mpp_read(state, pad, PMIC_MPP_REG_EN_CTL);
+       if (val < 0)
+               return val;
+
+       pad->is_enabled = !!val;
+
        return 0;
 }