ARM: dts: Add FIMD DT binding Documentation
authorVikas Sajjan <vikas.sajjan@linaro.org>
Mon, 8 Apr 2013 06:48:16 +0000 (15:48 +0900)
committerKukjin Kim <kgene.kim@samsung.com>
Mon, 8 Apr 2013 16:39:21 +0000 (01:39 +0900)
Add DT binding documentation for the FIMD IP block found in Samsung SoCs.

Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Documentation/devicetree/bindings/video/samsung-fimd.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt
new file mode 100644 (file)
index 0000000..778838a
--- /dev/null
@@ -0,0 +1,65 @@
+Device-Tree bindings for Samsung SoC display controller (FIMD)
+
+FIMD (Fully Interactive Mobile Display) is the Display Controller for the
+Samsung series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be one of the following
+               "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
+               "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
+               "samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */
+               "samsung,s5pc100-fimd"; /* for S5PC100 SoC  */
+               "samsung,s5pv210-fimd"; /* for S5PV210 SoC */
+               "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+               "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+
+- reg: physical base address and length of the FIMD registers set.
+
+- interrupt-parent: should be the phandle of the fimd controller's
+               parent interrupt controller.
+
+- interrupts: should contain a list of all FIMD IP block interrupts in the
+                order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+                format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+       "lcd_sys", in the same order as they were listed in the interrupts
+        property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+         clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+               property. Must contain "sclk_fimd" and "fimd".
+
+Optional Properties:
+- samsung,power-domain: a phandle to FIMD power domain node.
+
+Example:
+
+SoC specific DT entry:
+
+       fimd@11c00000 {
+               compatible = "samsung,exynos4210-fimd";
+               interrupt-parent = <&combiner>;
+               reg = <0x11c00000 0x20000>;
+               interrupt-names = "fifo", "vsync", "lcd_sys";
+               interrupts = <11 0>, <11 1>, <11 2>;
+               clocks = <&clock 140>, <&clock 283>;
+               clock-names = "sclk_fimd", "fimd";
+               samsung,power-domain = <&pd_lcd0>;
+               status = "disabled";
+       };
+
+Board specific DT entry:
+
+       fimd@11c00000 {
+               pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+               pinctrl-names = "default";
+               status = "okay";
+       };