ARM: dts: bcm2712: Prune the non-D0 hardware

There is no point describing hardware blocks in C0/1 that aren't also
in D0, so delete them.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

diff --git a/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 3631b79..b413658 100644 (file)
--- a/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -24,8 +24,6 @@
 #define spi6 _spi6
 #define uart0 _uart0
 #define uart2 _uart2
-#define uart3 _uart3
-#define uart4 _uart4
 #define uart5 _uart5
 
 #include "bcm2712.dtsi"

diff --git a/arch/arm/boot/dts/broadcom/bcm2712.dtsi b/arch/arm/boot/dts/broadcom/bcm2712.dtsi
index ec6acd2..09c4ee2 100644 (file)
--- a/arch/arm/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2712.dtsi
@@ -197,28 +197,6 @@
                        status = "disabled";
                };
 
-               uart3: serial@7d001600 {
-                       compatible = "arm,pl011", "arm,primecell";
-                       reg = <0x7d001600 0x200>;
-                       interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk_uart>,
-                                <&clk_vpu>;
-                       clock-names = "uartclk", "apb_pclk";
-                       arm,primecell-periphid = <0x00241011>;
-                       status = "disabled";
-               };
-
-               uart4: serial@7d001800 {
-                       compatible = "arm,pl011", "arm,primecell";
-                       reg = <0x7d001800 0x200>;
-                       interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk_uart>,
-                                <&clk_vpu>;
-                       clock-names = "uartclk", "apb_pclk";
-                       arm,primecell-periphid = <0x00241011>;
-                       status = "disabled";
-               };
-
                uart5: serial@7d001a00 {
                        compatible = "arm,pl011", "arm,primecell";
                        reg = <0x7d001a00 0x200>;
@@ -543,17 +521,6 @@
                        status = "disabled";
                };
 
-               uartc: serial@7d50e000 {
-                       compatible = "brcm,bcm7271-uart";
-                       reg = <0x7d50e000 0x20>;
-                       reg-names = "uart";
-                       reg-shift = <2>;
-                       reg-io-width = <4>;
-                       interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
-                       skip-init;
-                       status = "disabled";
-               };
-
                aon_intr: interrupt-controller@7d510600 {
                        compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
                        reg = <0x7d510600 0x30>;
@@ -1103,30 +1070,6 @@
                        brcm,msi-pci-addr = <0xff 0xffffe000>;
                };
 
-               genet: ethernet@1300000 {
-                       compatible = "brcm,bcm2711-genet-v5";
-                       reg = <0x10 0x01300000  0x0 0x20010>;
-                       #address-cells = <0x1>;
-                       #size-cells = <0x0>;
-                       interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-                       status = "disabled";
-                       phy-mode = "rgmii";
-                       fixed-link = <0x0 0x1 0x3e8 0x0 0x0>;
-                         phy-speed = <0x3e8>;
-                         phy-id = <0x101>;
-                         phy-type = <0x6>;
-                         local-mac-address = [ 00 10 18 d8 45 de ];
-                         device_type = "network";
-
-                       genet_mdio: mdio@e14 {
-                               compatible = "brcm,genet-mdio-v5";
-                               reg = <0xe14 0x8>;
-                               #address-cells = <0x1>;
-                               #size-cells = <0x0>;
-                       };
-               };
-
                syscon_piarbctl: syscon@400018 {
                        compatible = "brcm,syscon-piarbctl", "syscon", "simple-mfd";
                        reg = <0x10 0x00400018  0x0 0x18>;
@@ -1189,15 +1132,6 @@
                        status = "disabled";
                };
 
-               sdio0: mmc@1108000 {
-                       compatible = "brcm,bcm2711-emmc2";
-                       reg = <0x10 0x01108000  0x0 0x100>;
-                       interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clk_emmc2>;
-                       mmc-ddr-3_3v;
-                       status = "disabled";
-               };
-
                bcm_reset: reset-controller@1504318 {
                        compatible = "brcm,brcmstb-reset";
                        reg = <0x10 0x01504318  0x0 0x30>;