compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&ohci_clk>, <&hclk0>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
- clocks = <&lcd_clk>, <&hclk1>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>;
clock-names = "lcdc_clk", "hclk";
status = "disabled";
};
0x5 0x0 0x60000000 0x10000000
0x6 0x0 0x70000000 0x10000000
0x7 0x0 0x80000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
<18 IRQ_TYPE_LEVEL_HIGH 0>,
<19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udc_clk>, <&udpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
clock-names = "pclk", "hclk";
atmel,matrix = <&matrix>;
status = "disabled";
pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "mci_clk";
status = "disabled";
};
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
status = "disabled";
};
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart";
status = "disabled";
};
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "pclk";
status = "disabled";
};
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
- clocks = <&ssc1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "pclk";
status = "disabled";
};
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
- clocks = <&ssc2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "pclk";
status = "disabled";
};
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "spi_clk";
status = "disabled";
};
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
status = "disabled";
};
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart";
status = "disabled";
};
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@fffff600 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioC: gpio@fffff800 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioC_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
};
};
compatible = "atmel,at91sam9261-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91rm9200-clk-main";
- #clock-cells = <0>;
- clocks = <&main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <1000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
- <190000000 240000000 2 1>;
- };
-
- pllb: pllbck {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKB>;
- clocks = <&main>;
- reg = <1>;
- atmel,clk-input-range = <1000000 5000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
- };
-
- mck: masterck {
- compatible = "atmel,at91rm9200-clk-master";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
- clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
- atmel,clk-output-range = <0 94000000>;
- atmel,clk-divisors = <1 2 4 0>;
- };
-
- usb: usbck {
- compatible = "atmel,at91rm9200-clk-usb";
- #clock-cells = <0>;
- atmel,clk-divisors = <1 2 4 0>;
- clocks = <&pllb>;
- };
-
- prog: progck {
- compatible = "atmel,at91rm9200-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
-
- prog3: prog3 {
- #clock-cells = <0>;
- reg = <3>;
- interrupts = <AT91_PMC_PCKRDY(3)>;
- };
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
-
- pck3: pck3 {
- #clock-cells = <0>;
- reg = <11>;
- clocks = <&prog3>;
- };
-
- hclk0: hclk0 {
- #clock-cells = <0>;
- reg = <16>;
- clocks = <&mck>;
- };
-
- hclk1: hclk1 {
- #clock-cells = <0>;
- reg = <17>;
- clocks = <&mck>;
- };
- };
-
- periphck {
- compatible = "atmel,at91rm9200-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- pioB_clk: pioB_clk {
- #clock-cells = <0>;
- reg = <3>;
- };
-
- pioC_clk: pioC_clk {
- #clock-cells = <0>;
- reg = <4>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- udc_clk: udc_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- twi0_clk: twi0_clk {
- reg = <11>;
- #clock-cells = <0>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- ssc2_clk: ssc2_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- tc0_clk: tc0_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- tc1_clk: tc1_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- tc2_clk: tc2_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- ohci_clk: ohci_clk {
- #clock-cells = <0>;
- reg = <20>;
- };
-
- lcd_clk: lcd_clk {
- #clock-cells = <0>;
- reg = <21>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&slow_xtal>, <&main_xtal>;
+ clock-names = "slow_xtal", "main_xtal";
};
rstc@fffffd00 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
rtc@fffffd20 {
projects / platform / kernel / linux-rpi.git / commitdiff