efi_bs_call(free_pool, si);
}
-static efi_status_t reserve_kernel_base(unsigned long dram_base,
- unsigned long *reserve_addr,
- unsigned long *reserve_size)
-{
- efi_physical_addr_t alloc_addr;
- efi_memory_desc_t *memory_map;
- unsigned long nr_pages, map_size, desc_size, buff_size;
- efi_status_t status;
- unsigned long l;
-
- struct efi_boot_memmap map = {
- .map = &memory_map,
- .map_size = &map_size,
- .desc_size = &desc_size,
- .desc_ver = NULL,
- .key_ptr = NULL,
- .buff_size = &buff_size,
- };
-
- /*
- * Reserve memory for the uncompressed kernel image. This is
- * all that prevents any future allocations from conflicting
- * with the kernel. Since we can't tell from the compressed
- * image how much DRAM the kernel actually uses (due to BSS
- * size uncertainty) we allocate the maximum possible size.
- * Do this very early, as prints can cause memory allocations
- * that may conflict with this.
- */
- alloc_addr = dram_base + MAX_UNCOMP_KERNEL_SIZE;
- nr_pages = MAX_UNCOMP_KERNEL_SIZE / EFI_PAGE_SIZE;
- status = efi_bs_call(allocate_pages, EFI_ALLOCATE_MAX_ADDRESS,
- EFI_BOOT_SERVICES_DATA, nr_pages, &alloc_addr);
- if (status == EFI_SUCCESS) {
- if (alloc_addr == dram_base) {
- *reserve_addr = alloc_addr;
- *reserve_size = MAX_UNCOMP_KERNEL_SIZE;
- return EFI_SUCCESS;
- }
- /*
- * If we end up here, the allocation succeeded but starts below
- * dram_base. This can only occur if the real base of DRAM is
- * not a multiple of 128 MB, in which case dram_base will have
- * been rounded up. Since this implies that a part of the region
- * was already occupied, we need to fall through to the code
- * below to ensure that the existing allocations don't conflict.
- * For this reason, we use EFI_BOOT_SERVICES_DATA above and not
- * EFI_LOADER_DATA, which we wouldn't able to distinguish from
- * allocations that we want to disallow.
- */
- }
-
- /*
- * If the allocation above failed, we may still be able to proceed:
- * if the only allocations in the region are of types that will be
- * released to the OS after ExitBootServices(), the decompressor can
- * safely overwrite them.
- */
- status = efi_get_memory_map(&map);
- if (status != EFI_SUCCESS) {
- efi_err("reserve_kernel_base(): Unable to retrieve memory map.\n");
- return status;
- }
-
- for (l = 0; l < map_size; l += desc_size) {
- efi_memory_desc_t *desc;
- u64 start, end;
-
- desc = (void *)memory_map + l;
- start = desc->phys_addr;
- end = start + desc->num_pages * EFI_PAGE_SIZE;
-
- /* Skip if entry does not intersect with region */
- if (start >= dram_base + MAX_UNCOMP_KERNEL_SIZE ||
- end <= dram_base)
- continue;
-
- switch (desc->type) {
- case EFI_BOOT_SERVICES_CODE:
- case EFI_BOOT_SERVICES_DATA:
- /* Ignore types that are released to the OS anyway */
- continue;
-
- case EFI_CONVENTIONAL_MEMORY:
- /* Skip soft reserved conventional memory */
- if (efi_soft_reserve_enabled() &&
- (desc->attribute & EFI_MEMORY_SP))
- continue;
-
- /*
- * Reserve the intersection between this entry and the
- * region.
- */
- start = max(start, (u64)dram_base);
- end = min(end, (u64)dram_base + MAX_UNCOMP_KERNEL_SIZE);
-
- status = efi_bs_call(allocate_pages,
- EFI_ALLOCATE_ADDRESS,
- EFI_LOADER_DATA,
- (end - start) / EFI_PAGE_SIZE,
- &start);
- if (status != EFI_SUCCESS) {
- efi_err("reserve_kernel_base(): alloc failed.\n");
- goto out;
- }
- break;
-
- case EFI_LOADER_CODE:
- case EFI_LOADER_DATA:
- /*
- * These regions may be released and reallocated for
- * another purpose (including EFI_RUNTIME_SERVICE_DATA)
- * at any time during the execution of the OS loader,
- * so we cannot consider them as safe.
- */
- default:
- /*
- * Treat any other allocation in the region as unsafe */
- status = EFI_OUT_OF_RESOURCES;
- goto out;
- }
- }
-
- status = EFI_SUCCESS;
-out:
- efi_bs_call(free_pool, memory_map);
- return status;
-}
-
efi_status_t handle_kernel_image(unsigned long *image_addr,
unsigned long *image_size,
unsigned long *reserve_addr,
unsigned long *reserve_size,
- unsigned long dram_base,
efi_loaded_image_t *image)
{
- unsigned long kernel_base;
+ const int slack = TEXT_OFFSET - 5 * PAGE_SIZE;
+ int alloc_size = MAX_UNCOMP_KERNEL_SIZE + EFI_PHYS_ALIGN;
+ unsigned long alloc_base, kernel_base;
efi_status_t status;
- /* use a 16 MiB aligned base for the decompressed kernel */
- kernel_base = round_up(dram_base, EFI_PHYS_ALIGN) + TEXT_OFFSET;
-
/*
- * Note that some platforms (notably, the Raspberry Pi 2) put
- * spin-tables and other pieces of firmware at the base of RAM,
- * abusing the fact that the window of TEXT_OFFSET bytes at the
- * base of the kernel image is only partially used at the moment.
- * (Up to 5 pages are used for the swapper page tables)
+ * Allocate space for the decompressed kernel as low as possible.
+ * The region should be 16 MiB aligned, but the first 'slack' bytes
+ * are not used by Linux, so we allow those to be occupied by the
+ * firmware.
*/
- status = reserve_kernel_base(kernel_base - 5 * PAGE_SIZE, reserve_addr,
- reserve_size);
+ status = efi_low_alloc_above(alloc_size, EFI_PAGE_SIZE, &alloc_base, 0x0);
if (status != EFI_SUCCESS) {
efi_err("Unable to allocate memory for uncompressed kernel.\n");
return status;
}
- *image_addr = kernel_base;
+ if ((alloc_base % EFI_PHYS_ALIGN) > slack) {
+ /*
+ * More than 'slack' bytes are already occupied at the base of
+ * the allocation, so we need to advance to the next 16 MiB block.
+ */
+ kernel_base = round_up(alloc_base, EFI_PHYS_ALIGN);
+ efi_info("Free memory starts at 0x%lx, setting kernel_base to 0x%lx\n",
+ alloc_base, kernel_base);
+ } else {
+ kernel_base = round_down(alloc_base, EFI_PHYS_ALIGN);
+ }
+
+ *reserve_addr = kernel_base + slack;
+ *reserve_size = MAX_UNCOMP_KERNEL_SIZE;
+
+ /* now free the parts that we will not use */
+ if (*reserve_addr > alloc_base) {
+ efi_bs_call(free_pages, alloc_base,
+ (*reserve_addr - alloc_base) / EFI_PAGE_SIZE);
+ alloc_size -= *reserve_addr - alloc_base;
+ }
+ efi_bs_call(free_pages, *reserve_addr + MAX_UNCOMP_KERNEL_SIZE,
+ (alloc_size - MAX_UNCOMP_KERNEL_SIZE) / EFI_PAGE_SIZE);
+
+ *image_addr = kernel_base + TEXT_OFFSET;
*image_size = 0;
+
+ efi_debug("image addr == 0x%lx, reserve_addr == 0x%lx\n",
+ *image_addr, *reserve_addr);
+
return EFI_SUCCESS;
}
efi_err("Failed to install memreserve config table!\n");
}
-static unsigned long get_dram_base(void)
-{
- efi_status_t status;
- unsigned long map_size, buff_size;
- unsigned long membase = EFI_ERROR;
- struct efi_memory_map map;
- efi_memory_desc_t *md;
- struct efi_boot_memmap boot_map;
-
- boot_map.map = (efi_memory_desc_t **)&map.map;
- boot_map.map_size = &map_size;
- boot_map.desc_size = &map.desc_size;
- boot_map.desc_ver = NULL;
- boot_map.key_ptr = NULL;
- boot_map.buff_size = &buff_size;
-
- status = efi_get_memory_map(&boot_map);
- if (status != EFI_SUCCESS)
- return membase;
-
- map.map_end = map.map + map_size;
-
- for_each_efi_memory_desc_in_map(&map, md) {
- if (md->attribute & EFI_MEMORY_WB) {
- if (membase > md->phys_addr)
- membase = md->phys_addr;
- }
- }
-
- efi_bs_call(free_pool, map.map);
-
- return membase;
-}
-
/*
* EFI entry point for the arm/arm64 EFI stubs. This is the entrypoint
* that is described in the PE/COFF header. Most of the code is the same
efi_status_t status;
unsigned long image_addr;
unsigned long image_size = 0;
- unsigned long dram_base;
/* addr/point and size pairs for memory management*/
unsigned long initrd_addr = 0;
unsigned long initrd_size = 0;
goto fail;
}
- dram_base = get_dram_base();
- if (dram_base == EFI_ERROR) {
- efi_err("Failed to find DRAM base\n");
- status = EFI_LOAD_ERROR;
- goto fail;
- }
-
/*
* Get the command line from EFI, using the LOADED_IMAGE
* protocol. We are going to copy the command line into the
status = handle_kernel_image(&image_addr, &image_size,
&reserve_addr,
&reserve_size,
- dram_base, image);
+ image);
if (status != EFI_SUCCESS) {
efi_err("Failed to relocate kernel\n");
goto fail_free_screeninfo;
projects / platform / kernel / linux-rpi.git / commitdiff