e100: Support sending custom Ethernet CRC

This can aid with testing the RX logic for bad
CRCs.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 3ecbded..6f9f70a 100644 (file)
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -412,6 +412,10 @@ enum cb_status {
        cb_ok       = 0x2000,
 };
 
+/**
+ * cb_command - Command Block flags
+ * @cb_tx_nc:  0: controler does CRC (normal),  1: CRC from skb memory
+ */
 enum cb_command {
        cb_nop    = 0x0000,
        cb_iaaddr = 0x0001,
@@ -421,6 +425,7 @@ enum cb_command {
        cb_ucode  = 0x0005,
        cb_dump   = 0x0006,
        cb_tx_sf  = 0x0008,
+       cb_tx_nc  = 0x0010,
        cb_cid    = 0x1f00,
        cb_i      = 0x2000,
        cb_s      = 0x4000,
@@ -1724,6 +1729,16 @@ static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
        struct sk_buff *skb)
 {
        cb->command = nic->tx_command;
+
+       /*
+        * Use the last 4 bytes of the SKB payload packet as the CRC, used for
+        * testing, ie sending frames with bad CRC.
+        */
+       if (unlikely(skb->no_fcs))
+               cb->command |= __constant_cpu_to_le16(cb_tx_nc);
+       else
+               cb->command &= ~__constant_cpu_to_le16(cb_tx_nc);
+
        /* interrupt every 16 packets regardless of delay */
        if ((nic->cbs_avail & ~15) == nic->cbs_avail)
                cb->command |= cpu_to_le16(cb_i);
@@ -2778,6 +2793,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
                return -ENOMEM;
 
        netdev->hw_features |= NETIF_F_RXFCS;
+       netdev->priv_flags |= IFF_SUPP_NOFCS;
 
        netdev->netdev_ops = &e100_netdev_ops;
        SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);