[all/audio] Remove unused source code in system.pa

Change-Id: If15643fbd88a40d1062724ada78e85ead16da1c9
Signed-off-by: Seonmi Jin <seonmi.jin@samsung.com>

diff --git a/mmfw-sysconf-simulator/etc/pulse/system.pa b/mmfw-sysconf-simulator/etc/pulse/system.pa
index a024edb..abfb92d 100644 (file)
--- a/mmfw-sysconf-simulator/etc/pulse/system.pa
+++ b/mmfw-sysconf-simulator/etc/pulse/system.pa
@@ -19,27 +19,12 @@
 # This startup script is used only if PulseAudio is started in system
 # mode.
 
-### Custom policy module to route between bt<=speaker
-#load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,0
-#load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,0 fragment_size=8192
-#load-module module-alsa-source source_name=alsa_input.0.analog-stereo device=hw:0,0 fragment_size=8192
-#load-module module-alsa-source source_name=alsa_input.8.analog-stereo device=hw:0,8 mmap=0
-#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 tsched_buffer_size=2048576
-#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 fragment_size=8192 mmap=1
-#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,1 fragment_size=8192 mmap=1 tsched=1 tsched_buffer_size=262144 fixed_latency_range=1
-
 ### Automatically load driver modules depending on the hardware available
 #.ifexists module-udev-detect.so
 #load-module module-udev-detect
-#.else
-### Use the static hardware detection module (for systems that lack udev/hal support)
-#load-module module-detect
 #.endif
 
 ### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
 load-module module-native-protocol-unix auth-anonymous=1
 
 ### Load module-policy
@@ -51,7 +36,6 @@ load-module module-role-ducking global=1 volume=0
 
 load-module module-bluetooth-policy
 load-module module-bluetooth-discover
-#load-module module-bluetooth-discover enable_scmst=true
 
 ### Automatically restore the volume of streams and devices
 #load-module module-stream-restore
@@ -78,13 +62,6 @@ load-module module-always-sink
 ### Automatically suspend sinks/sources that become idle for too long
 load-module module-suspend-on-idle timeout=1
 
-### Enable positioned event sounds
-#load-module module-position-event-sounds
-
-### Set default source (not to use alsa_sink monitor which is index 0)
-#set-default-source alsa_input.0.analog-stereo
-
 load-module module-null-sink
-#load-module module-remap-sink sink_name=mono_alsa master=alsa_output.1.analog-stereo channels=1
 load-sample camera-shutter /usr/share/sounds/mm-camcorder/capture_shutter_02.wav
 load-sample recording-stop /usr/share/sounds/mm-camcorder/recording_stop_01.wav

diff --git a/mmfw-sysconf-target-n4/etc/pulse/system.pa b/mmfw-sysconf-target-n4/etc/pulse/system.pa
index a024edb..abfb92d 100644 (file)
--- a/mmfw-sysconf-target-n4/etc/pulse/system.pa
+++ b/mmfw-sysconf-target-n4/etc/pulse/system.pa
@@ -19,27 +19,12 @@
 # This startup script is used only if PulseAudio is started in system
 # mode.
 
-### Custom policy module to route between bt<=speaker
-#load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,0
-#load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,0 fragment_size=8192
-#load-module module-alsa-source source_name=alsa_input.0.analog-stereo device=hw:0,0 fragment_size=8192
-#load-module module-alsa-source source_name=alsa_input.8.analog-stereo device=hw:0,8 mmap=0
-#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 tsched_buffer_size=2048576
-#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 fragment_size=8192 mmap=1
-#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,1 fragment_size=8192 mmap=1 tsched=1 tsched_buffer_size=262144 fixed_latency_range=1
-
 ### Automatically load driver modules depending on the hardware available
 #.ifexists module-udev-detect.so
 #load-module module-udev-detect
-#.else
-### Use the static hardware detection module (for systems that lack udev/hal support)
-#load-module module-detect
 #.endif
 
 ### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
 load-module module-native-protocol-unix auth-anonymous=1
 
 ### Load module-policy
@@ -51,7 +36,6 @@ load-module module-role-ducking global=1 volume=0
 
 load-module module-bluetooth-policy
 load-module module-bluetooth-discover
-#load-module module-bluetooth-discover enable_scmst=true
 
 ### Automatically restore the volume of streams and devices
 #load-module module-stream-restore
@@ -78,13 +62,6 @@ load-module module-always-sink
 ### Automatically suspend sinks/sources that become idle for too long
 load-module module-suspend-on-idle timeout=1
 
-### Enable positioned event sounds
-#load-module module-position-event-sounds
-
-### Set default source (not to use alsa_sink monitor which is index 0)
-#set-default-source alsa_input.0.analog-stereo
-
 load-module module-null-sink
-#load-module module-remap-sink sink_name=mono_alsa master=alsa_output.1.analog-stereo channels=1
 load-sample camera-shutter /usr/share/sounds/mm-camcorder/capture_shutter_02.wav
 load-sample recording-stop /usr/share/sounds/mm-camcorder/recording_stop_01.wav

diff --git a/mmfw-sysconf-target-u3/etc/pulse/system.pa b/mmfw-sysconf-target-u3/etc/pulse/system.pa
index a024edb..abfb92d 100644 (file)
--- a/mmfw-sysconf-target-u3/etc/pulse/system.pa
+++ b/mmfw-sysconf-target-u3/etc/pulse/system.pa
@@ -19,27 +19,12 @@
 # This startup script is used only if PulseAudio is started in system
 # mode.
 
-### Custom policy module to route between bt<=speaker
-#load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,0
-#load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,0 fragment_size=8192
-#load-module module-alsa-source source_name=alsa_input.0.analog-stereo device=hw:0,0 fragment_size=8192
-#load-module module-alsa-source source_name=alsa_input.8.analog-stereo device=hw:0,8 mmap=0
-#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 tsched_buffer_size=2048576
-#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 fragment_size=8192 mmap=1
-#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,1 fragment_size=8192 mmap=1 tsched=1 tsched_buffer_size=262144 fixed_latency_range=1
-
 ### Automatically load driver modules depending on the hardware available
 #.ifexists module-udev-detect.so
 #load-module module-udev-detect
-#.else
-### Use the static hardware detection module (for systems that lack udev/hal support)
-#load-module module-detect
 #.endif
 
 ### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
 load-module module-native-protocol-unix auth-anonymous=1
 
 ### Load module-policy
@@ -51,7 +36,6 @@ load-module module-role-ducking global=1 volume=0
 
 load-module module-bluetooth-policy
 load-module module-bluetooth-discover
-#load-module module-bluetooth-discover enable_scmst=true
 
 ### Automatically restore the volume of streams and devices
 #load-module module-stream-restore
@@ -78,13 +62,6 @@ load-module module-always-sink
 ### Automatically suspend sinks/sources that become idle for too long
 load-module module-suspend-on-idle timeout=1
 
-### Enable positioned event sounds
-#load-module module-position-event-sounds
-
-### Set default source (not to use alsa_sink monitor which is index 0)
-#set-default-source alsa_input.0.analog-stereo
-
 load-module module-null-sink
-#load-module module-remap-sink sink_name=mono_alsa master=alsa_output.1.analog-stereo channels=1
 load-sample camera-shutter /usr/share/sounds/mm-camcorder/capture_shutter_02.wav
 load-sample recording-stop /usr/share/sounds/mm-camcorder/recording_stop_01.wav

diff --git a/packaging/mmfw-sysconf.spec b/packaging/mmfw-sysconf.spec
index eb7794e..2fb18de 100644 (file)
--- a/packaging/mmfw-sysconf.spec
+++ b/packaging/mmfw-sysconf.spec
@@ -2,7 +2,7 @@
 
 Name:       mmfw-sysconf
 Summary:    Multimedia Framework system configuration package
-Version:    0.2.19
+Version:    0.2.20
 Release:    0
 Group:      Multimedia/Configuration
 License:    Apache-2.0