+++ /dev/null
-/*
- * linux/drivers/mtd/onenand/onenand_sim.c
- *
- * The OneNAND simulator
- *
- * Copyright © 2005-2007 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
- * Flex-OneNAND simulator support
- * Copyright (C) Samsung Electronics, 2008
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-
-#include <linux/io.h>
-
-#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
-#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec
-#endif
-
-#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
-#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04
-#endif
-
-#define CONFIG_FLEXONENAND ((CONFIG_ONENAND_SIM_DEVICE_ID >> 9) & 1)
-
-#ifndef CONFIG_ONENAND_SIM_VERSION_ID
-#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e
-#endif
-
-#ifndef CONFIG_ONENAND_SIM_TECHNOLOGY_ID
-#define CONFIG_ONENAND_SIM_TECHNOLOGY_ID CONFIG_FLEXONENAND
-#endif
-
-/* Initial boundary values for Flex-OneNAND Simulator */
-#ifndef CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY
-#define CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY 0x01
-#endif
-
-#ifndef CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY
-#define CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY 0x01
-#endif
-
-static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER;
-static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID;
-static int version_id = CONFIG_ONENAND_SIM_VERSION_ID;
-static int technology_id = CONFIG_ONENAND_SIM_TECHNOLOGY_ID;
-static int boundary[] = {
- CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY,
- CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY,
-};
-
-struct onenand_flash {
- void __iomem *base;
- void __iomem *data;
-};
-
-#define ONENAND_CORE(flash) (flash->data)
-#define ONENAND_CORE_SPARE(flash, this, offset) \
- ((flash->data) + (this->chipsize) + (offset >> 5))
-
-#define ONENAND_MAIN_AREA(this, offset) \
- (this->base + ONENAND_DATARAM + offset)
-
-#define ONENAND_SPARE_AREA(this, offset) \
- (this->base + ONENAND_SPARERAM + offset)
-
-#define ONENAND_GET_WP_STATUS(this) \
- (readw(this->base + ONENAND_REG_WP_STATUS))
-
-#define ONENAND_SET_WP_STATUS(v, this) \
- (writew(v, this->base + ONENAND_REG_WP_STATUS))
-
-/* It has all 0xff chars */
-#define MAX_ONENAND_PAGESIZE (4096 + 128)
-static unsigned char *ffchars;
-
-#if CONFIG_FLEXONENAND
-#define PARTITION_NAME "Flex-OneNAND simulator partition"
-#else
-#define PARTITION_NAME "OneNAND simulator partition"
-#endif
-
-static struct mtd_partition os_partitions[] = {
- {
- .name = PARTITION_NAME,
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/*
- * OneNAND simulator mtd
- */
-struct onenand_info {
- struct mtd_info mtd;
- struct mtd_partition *parts;
- struct onenand_chip onenand;
- struct onenand_flash flash;
-};
-
-static struct onenand_info *info;
-
-#define DPRINTK(format, args...) \
-do { \
- printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \
- __LINE__, ##args); \
-} while (0)
-
-/**
- * onenand_lock_handle - Handle Lock scheme
- * @this: OneNAND device structure
- * @cmd: The command to be sent
- *
- * Send lock command to OneNAND device.
- * The lock scheme depends on chip type.
- */
-static void onenand_lock_handle(struct onenand_chip *this, int cmd)
-{
- int block_lock_scheme;
- int status;
-
- status = ONENAND_GET_WP_STATUS(this);
- block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
-
- switch (cmd) {
- case ONENAND_CMD_UNLOCK:
- case ONENAND_CMD_UNLOCK_ALL:
- if (block_lock_scheme)
- ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
- else
- ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
- break;
-
- case ONENAND_CMD_LOCK:
- if (block_lock_scheme)
- ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
- else
- ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
- break;
-
- case ONENAND_CMD_LOCK_TIGHT:
- if (block_lock_scheme)
- ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
- else
- ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * onenand_bootram_handle - Handle BootRAM area
- * @this: OneNAND device structure
- * @cmd: The command to be sent
- *
- * Emulate BootRAM area. It is possible to do basic operation using BootRAM.
- */
-static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
-{
- switch (cmd) {
- case ONENAND_CMD_READID:
- writew(manuf_id, this->base);
- writew(device_id, this->base + 2);
- writew(version_id, this->base + 4);
- break;
-
- default:
- /* REVIST: Handle other commands */
- break;
- }
-}
-
-/**
- * onenand_update_interrupt - Set interrupt register
- * @this: OneNAND device structure
- * @cmd: The command to be sent
- *
- * Update interrupt register. The status depends on command.
- */
-static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
-{
- int interrupt = ONENAND_INT_MASTER;
-
- switch (cmd) {
- case ONENAND_CMD_READ:
- case ONENAND_CMD_READOOB:
- interrupt |= ONENAND_INT_READ;
- break;
-
- case ONENAND_CMD_PROG:
- case ONENAND_CMD_PROGOOB:
- interrupt |= ONENAND_INT_WRITE;
- break;
-
- case ONENAND_CMD_ERASE:
- interrupt |= ONENAND_INT_ERASE;
- break;
-
- case ONENAND_CMD_RESET:
- interrupt |= ONENAND_INT_RESET;
- break;
-
- default:
- break;
- }
-
- writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
-}
-
-/**
- * onenand_check_overwrite - Check if over-write happened
- * @dest: The destination pointer
- * @src: The source pointer
- * @count: The length to be check
- *
- * Returns: 0 on same, otherwise 1
- *
- * Compare the source with destination
- */
-static int onenand_check_overwrite(void *dest, void *src, size_t count)
-{
- unsigned int *s = (unsigned int *) src;
- unsigned int *d = (unsigned int *) dest;
- int i;
-
- count >>= 2;
- for (i = 0; i < count; i++)
- if ((*s++ ^ *d++) != 0)
- return 1;
-
- return 0;
-}
-
-/**
- * onenand_data_handle - Handle OneNAND Core and DataRAM
- * @this: OneNAND device structure
- * @cmd: The command to be sent
- * @dataram: Which dataram used
- * @offset: The offset to OneNAND Core
- *
- * Copy data from OneNAND Core to DataRAM (read)
- * Copy data from DataRAM to OneNAND Core (write)
- * Erase the OneNAND Core (erase)
- */
-static void onenand_data_handle(struct onenand_chip *this, int cmd,
- int dataram, unsigned int offset)
-{
- struct mtd_info *mtd = &info->mtd;
- struct onenand_flash *flash = this->priv;
- int main_offset, spare_offset, die = 0;
- void __iomem *src;
- void __iomem *dest;
- unsigned int i;
- static int pi_operation;
- int erasesize, rgn;
-
- if (dataram) {
- main_offset = mtd->writesize;
- spare_offset = mtd->oobsize;
- } else {
- main_offset = 0;
- spare_offset = 0;
- }
-
- if (pi_operation) {
- die = readw(this->base + ONENAND_REG_START_ADDRESS2);
- die >>= ONENAND_DDP_SHIFT;
- }
-
- switch (cmd) {
- case FLEXONENAND_CMD_PI_ACCESS:
- pi_operation = 1;
- break;
-
- case ONENAND_CMD_RESET:
- pi_operation = 0;
- break;
-
- case ONENAND_CMD_READ:
- src = ONENAND_CORE(flash) + offset;
- dest = ONENAND_MAIN_AREA(this, main_offset);
- if (pi_operation) {
- writew(boundary[die], this->base + ONENAND_DATARAM);
- break;
- }
- memcpy(dest, src, mtd->writesize);
- /* Fall through */
-
- case ONENAND_CMD_READOOB:
- src = ONENAND_CORE_SPARE(flash, this, offset);
- dest = ONENAND_SPARE_AREA(this, spare_offset);
- memcpy(dest, src, mtd->oobsize);
- break;
-
- case ONENAND_CMD_PROG:
- src = ONENAND_MAIN_AREA(this, main_offset);
- dest = ONENAND_CORE(flash) + offset;
- if (pi_operation) {
- boundary[die] = readw(this->base + ONENAND_DATARAM);
- break;
- }
- /* To handle partial write */
- for (i = 0; i < (1 << mtd->subpage_sft); i++) {
- int off = i * this->subpagesize;
- if (!memcmp(src + off, ffchars, this->subpagesize))
- continue;
- if (memcmp(dest + off, ffchars, this->subpagesize) &&
- onenand_check_overwrite(dest + off, src + off, this->subpagesize))
- printk(KERN_ERR "over-write happened at 0x%08x\n", offset);
- memcpy(dest + off, src + off, this->subpagesize);
- }
- /* Fall through */
-
- case ONENAND_CMD_PROGOOB:
- src = ONENAND_SPARE_AREA(this, spare_offset);
- /* Check all data is 0xff chars */
- if (!memcmp(src, ffchars, mtd->oobsize))
- break;
-
- dest = ONENAND_CORE_SPARE(flash, this, offset);
- if (memcmp(dest, ffchars, mtd->oobsize) &&
- onenand_check_overwrite(dest, src, mtd->oobsize))
- printk(KERN_ERR "OOB: over-write happened at 0x%08x\n",
- offset);
- memcpy(dest, src, mtd->oobsize);
- break;
-
- case ONENAND_CMD_ERASE:
- if (pi_operation)
- break;
-
- if (FLEXONENAND(this)) {
- rgn = flexonenand_region(mtd, offset);
- erasesize = mtd->eraseregions[rgn].erasesize;
- } else
- erasesize = mtd->erasesize;
-
- memset(ONENAND_CORE(flash) + offset, 0xff, erasesize);
- memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
- (erasesize >> 5));
- break;
-
- default:
- break;
- }
-}
-
-/**
- * onenand_command_handle - Handle command
- * @this: OneNAND device structure
- * @cmd: The command to be sent
- *
- * Emulate OneNAND command.
- */
-static void onenand_command_handle(struct onenand_chip *this, int cmd)
-{
- unsigned long offset = 0;
- int block = -1, page = -1, bufferram = -1;
- int dataram = 0;
-
- switch (cmd) {
- case ONENAND_CMD_UNLOCK:
- case ONENAND_CMD_LOCK:
- case ONENAND_CMD_LOCK_TIGHT:
- case ONENAND_CMD_UNLOCK_ALL:
- onenand_lock_handle(this, cmd);
- break;
-
- case ONENAND_CMD_BUFFERRAM:
- /* Do nothing */
- return;
-
- default:
- block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
- if (block & (1 << ONENAND_DDP_SHIFT)) {
- block &= ~(1 << ONENAND_DDP_SHIFT);
- /* The half of chip block */
- block += this->chipsize >> (this->erase_shift + 1);
- }
- if (cmd == ONENAND_CMD_ERASE)
- break;
-
- page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
- page = (page >> ONENAND_FPA_SHIFT);
- bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
- bufferram >>= ONENAND_BSA_SHIFT;
- bufferram &= ONENAND_BSA_DATARAM1;
- dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
- break;
- }
-
- if (block != -1)
- offset = onenand_addr(this, block);
-
- if (page != -1)
- offset += page << this->page_shift;
-
- onenand_data_handle(this, cmd, dataram, offset);
-
- onenand_update_interrupt(this, cmd);
-}
-
-/**
- * onenand_writew - [OneNAND Interface] Emulate write operation
- * @value: value to write
- * @addr: address to write
- *
- * Write OneNAND register with value
- */
-static void onenand_writew(unsigned short value, void __iomem * addr)
-{
- struct onenand_chip *this = info->mtd.priv;
-
- /* BootRAM handling */
- if (addr < this->base + ONENAND_DATARAM) {
- onenand_bootram_handle(this, value);
- return;
- }
- /* Command handling */
- if (addr == this->base + ONENAND_REG_COMMAND)
- onenand_command_handle(this, value);
-
- writew(value, addr);
-}
-
-/**
- * flash_init - Initialize OneNAND simulator
- * @flash: OneNAND simulator data strucutres
- *
- * Initialize OneNAND simulator.
- */
-static int __init flash_init(struct onenand_flash *flash)
-{
- int density, size;
- int buffer_size;
-
- flash->base = kzalloc(131072, GFP_KERNEL);
- if (!flash->base) {
- printk(KERN_ERR "Unable to allocate base address.\n");
- return -ENOMEM;
- }
-
- density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
- density &= ONENAND_DEVICE_DENSITY_MASK;
- size = ((16 << 20) << density);
-
- ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
- if (!ONENAND_CORE(flash)) {
- printk(KERN_ERR "Unable to allocate nand core address.\n");
- kfree(flash->base);
- return -ENOMEM;
- }
-
- memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
-
- /* Setup registers */
- writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
- writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
- writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
- writew(technology_id, flash->base + ONENAND_REG_TECHNOLOGY);
-
- if (density < 2 && (!CONFIG_FLEXONENAND))
- buffer_size = 0x0400; /* 1KiB page */
- else
- buffer_size = 0x0800; /* 2KiB page */
- writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
-
- return 0;
-}
-
-/**
- * flash_exit - Clean up OneNAND simulator
- * @flash: OneNAND simulator data structures
- *
- * Clean up OneNAND simulator.
- */
-static void flash_exit(struct onenand_flash *flash)
-{
- vfree(ONENAND_CORE(flash));
- kfree(flash->base);
-}
-
-static int __init onenand_sim_init(void)
-{
- /* Allocate all 0xff chars pointer */
- ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
- if (!ffchars) {
- printk(KERN_ERR "Unable to allocate ff chars.\n");
- return -ENOMEM;
- }
- memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
-
- /* Allocate OneNAND simulator mtd pointer */
- info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
- if (!info) {
- printk(KERN_ERR "Unable to allocate core structures.\n");
- kfree(ffchars);
- return -ENOMEM;
- }
-
- /* Override write_word function */
- info->onenand.write_word = onenand_writew;
-
- if (flash_init(&info->flash)) {
- printk(KERN_ERR "Unable to allocate flash.\n");
- kfree(ffchars);
- kfree(info);
- return -ENOMEM;
- }
-
- info->parts = os_partitions;
-
- info->onenand.base = info->flash.base;
- info->onenand.priv = &info->flash;
-
- info->mtd.name = "OneNAND simulator";
- info->mtd.priv = &info->onenand;
- info->mtd.owner = THIS_MODULE;
-
- if (onenand_scan(&info->mtd, 1)) {
- flash_exit(&info->flash);
- kfree(ffchars);
- kfree(info);
- return -ENXIO;
- }
-
- mtd_device_register(&info->mtd, info->parts,
- ARRAY_SIZE(os_partitions));
-
- return 0;
-}
-
-static void __exit onenand_sim_exit(void)
-{
- struct onenand_chip *this = info->mtd.priv;
- struct onenand_flash *flash = this->priv;
-
- onenand_release(&info->mtd);
- flash_exit(flash);
- kfree(ffchars);
- kfree(info);
-}
-
-module_init(onenand_sim_init);
-module_exit(onenand_sim_exit);
-
-MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
-MODULE_DESCRIPTION("The OneNAND flash simulator");
-MODULE_LICENSE("GPL");
projects / platform / upstream / kernel-adaptation-pc.git / commitdiff