--- /dev/null
+/*
+ * P1023 RDB Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1023si-pre.dtsi"
+
+/ {
+ model = "fsl,P1023";
+ compatible = "fsl,P1023RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc: soc@ff600000 {
+ ranges = <0x0 0x0 0xff600000 0x200000>;
+
+ i2c@3000 {
+ eeprom@53 {
+ compatible = "at24,24c04";
+ reg = <0x53>;
+ };
+
+ rtc@6f {
+ compatible = "microchip,mcp7941x";
+ reg = <0x6f>;
+ };
+ };
+
+ usb@22000 {
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+ };
+
+ lbc: localbus@ff605000 {
+ reg = <0 0xff605000 0 0x1000>;
+
+ /* NOR, NAND Flashes */
+ ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+ 0x1 0x0 0x0 0xffa00000 0x08000000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x04000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* 48MB for Root File System */
+ reg = <0x00000000 0x03000000>;
+ label = "NOR Root File System";
+ };
+
+ partition@3000000 {
+ /* 1MB for DTB Image */
+ reg = <0x03000000 0x00100000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@3100000 {
+ /* 14MB for Linux Kernel Image */
+ reg = <0x03100000 0x00e00000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@3f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x03f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 14MB for Linux Kernel Image */
+ reg = <0x00200000 0x00e00000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@1000000 {
+ /* 96MB for Root File System Image */
+ reg = <0x01000000 0x06000000>;
+ label = "NAND Root File System";
+ };
+
+ partition@7000000 {
+ /* 16MB for User Writable Area */
+ reg = <0x07000000 0x01000000>;
+ label = "NAND Writable User area";
+ };
+ };
+ };
+
+ pci0: pcie@ff60a000 {
+ reg = <0 0xff60a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ pcie@0 {
+ /* IRQ[0:3] are pulled up on board, set to active-low */
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 0 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ board_pci1: pci1: pcie@ff609000 {
+ reg = <0 0xff609000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ /*
+ * IRQ[4:6] only for PCIe, set to active-high,
+ * IRQ[7] is pulled up on board, set to active-low
+ */
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 4 2 0 0
+ 0000 0 0 2 &mpic 5 2 0 0
+ 0000 0 0 3 &mpic 6 2 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci2: pcie@ff60b000 {
+ reg = <0 0xff60b000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ /*
+ * IRQ[8:10] are pulled up on board, set to active-low
+ * IRQ[11] only for PCIe, set to active-high,
+ */
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 8 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 2 0 0
+ >;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+};
+
+/include/ "fsl/p1023si-post.dtsi"
/*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc.
*
* Author: Roy Zang <tie-fei.zang@freescale.com>
*
}
machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices);
static void __init mpc85xx_rds_pic_init(void)
{
}
+static int __init p1023_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1023RDB");
+
+}
+
define_machine(p1023_rds) {
.name = "P1023 RDS",
.probe = p1023_rds_probe,
#endif
};
+define_machine(p1023_rdb) {
+ .name = "P1023 RDB",
+ .probe = p1023_rdb_probe,
+ .setup_arch = mpc85xx_rds_setup_arch,
+ .init_IRQ = mpc85xx_rds_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+};
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff