hwmon/ds1621: Minor cleanups
authorJean Delvare <khali@linux-fr.org>
Sat, 9 Jun 2007 14:11:15 +0000 (10:11 -0400)
committerMark M. Hoffman <mhoffman@lightlink.com>
Thu, 19 Jul 2007 18:22:11 +0000 (14:22 -0400)
* Discard comments which do not apply or are redundant.
* Remove a few useless instructions.
* Rename new_client to just client.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
drivers/hwmon/ds1621.c

index d5ac422..ccf0fe6 100644 (file)
@@ -63,10 +63,7 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low")
 #define DS1621_ALARM_TEMP_HIGH         0x40
 #define DS1621_ALARM_TEMP_LOW          0x20
 
-/* Conversions. Rounding and limit checking is only done on the TO_REG
-   variants. Note that you should be a bit careful with which arguments
-   these macros are called: arguments may be evaluated more than once.
-   Fixing this is just not worth it. */
+/* Conversions */
 #define ALARMS_FROM_REG(val) ((val) & \
                               (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
 
@@ -101,7 +98,7 @@ static struct i2c_driver ds1621_driver = {
 
 /* All registers are word-sized, except for the configuration register.
    DS1621 uses a high-byte first convention, which is exactly opposite to
-   the usual practice. */
+   the SMBus standard. */
 static int ds1621_read_value(struct i2c_client *client, u8 reg)
 {
        if (reg == DS1621_REG_CONF)
@@ -110,9 +107,6 @@ static int ds1621_read_value(struct i2c_client *client, u8 reg)
                return swab16(i2c_smbus_read_word_data(client, reg));
 }
 
-/* All registers are word-sized, except for the configuration register.
-   DS1621 uses a high-byte first convention, which is exactly opposite to
-   the usual practice. */
 static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)
 {
        if (reg == DS1621_REG_CONF)
@@ -204,7 +198,7 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
                         int kind)
 {
        int conf, temp;
-       struct i2c_client *new_client;
+       struct i2c_client *client;
        struct ds1621_data *data;
        int err = 0;
 
@@ -221,55 +215,48 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
                goto exit;
        }
        
-       new_client = &data->client;
-       i2c_set_clientdata(new_client, data);
-       new_client->addr = address;
-       new_client->adapter = adapter;
-       new_client->driver = &ds1621_driver;
-       new_client->flags = 0;
-
+       client = &data->client;
+       i2c_set_clientdata(client, data);
+       client->addr = address;
+       client->adapter = adapter;
+       client->driver = &ds1621_driver;
 
        /* Now, we do the remaining detection. It is lousy. */
        if (kind < 0) {
                /* The NVB bit should be low if no EEPROM write has been 
                   requested during the latest 10ms, which is highly 
                   improbable in our case. */
-               conf = ds1621_read_value(new_client, DS1621_REG_CONF);
+               conf = ds1621_read_value(client, DS1621_REG_CONF);
                if (conf & DS1621_REG_CONFIG_NVB)
                        goto exit_free;
                /* The 7 lowest bits of a temperature should always be 0. */
-               temp = ds1621_read_value(new_client, DS1621_REG_TEMP);
+               temp = ds1621_read_value(client, DS1621_REG_TEMP);
                if (temp & 0x007f)
                        goto exit_free;
-               temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN);
+               temp = ds1621_read_value(client, DS1621_REG_TEMP_MIN);
                if (temp & 0x007f)
                        goto exit_free;
-               temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX);
+               temp = ds1621_read_value(client, DS1621_REG_TEMP_MAX);
                if (temp & 0x007f)
                        goto exit_free;
        }
 
-       /* Determine the chip type - only one kind supported! */
-       if (kind <= 0)
-               kind = ds1621;
-
        /* Fill in remaining client fields and put it into the global list */
-       strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
-       data->valid = 0;
+       strlcpy(client->name, "ds1621", I2C_NAME_SIZE);
        mutex_init(&data->update_lock);
 
        /* Tell the I2C layer a new client has arrived */
-       if ((err = i2c_attach_client(new_client)))
+       if ((err = i2c_attach_client(client)))
                goto exit_free;
 
        /* Initialize the DS1621 chip */
-       ds1621_init_client(new_client);
+       ds1621_init_client(client);
 
        /* Register sysfs hooks */
-       if ((err = sysfs_create_group(&new_client->dev.kobj, &ds1621_group)))
+       if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
                goto exit_detach;
 
-       data->class_dev = hwmon_device_register(&new_client->dev);
+       data->class_dev = hwmon_device_register(&client->dev);
        if (IS_ERR(data->class_dev)) {
                err = PTR_ERR(data->class_dev);
                goto exit_remove_files;
@@ -278,9 +265,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
        return 0;
 
       exit_remove_files:
-       sysfs_remove_group(&new_client->dev.kobj, &ds1621_group);
+       sysfs_remove_group(&client->dev.kobj, &ds1621_group);
       exit_detach:
-       i2c_detach_client(new_client);
+       i2c_detach_client(client);
       exit_free:
        kfree(data);
       exit: