ASoC: wm8962: Enable SYSCLK provisonally before fetching generated DSPCLK_DIV
authorNicolin Chen <b42378@freescale.com>
Wed, 4 Dec 2013 09:22:16 +0000 (17:22 +0800)
committerMark Brown <broonie@linaro.org>
Thu, 5 Dec 2013 14:59:41 +0000 (14:59 +0000)
DSPCLK_DIV can be only generated correctly after enabling SYSCLK. But if the
current bias_level hasn't reached SND_SOC_BIAS_ON, DAPM won't enable SYSCLK,
which would cause the calculation result from DSPCLK_DIV invalid since bit
DSPCLK_DIV will be finally turned to its true value after DAPM enables SYSCLK
while the driver won't calculate it again for the current instance. In this
circumstance, a playback which needs non-zero DSPCLK_DIV would be distorted
due to unexpected clock frequency resulted from an invalid DSPCLK_DIV value.

So this patch provisionally enables the SYSCLK to get a valid DSPCLK_DIV for
calculation and then disables it afterward.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
sound/soc/codecs/wm8962.c

index 543c5c2..0f17ed3 100644 (file)
@@ -2439,7 +2439,20 @@ static void wm8962_configure_bclk(struct snd_soc_codec *codec)
        snd_soc_update_bits(codec, WM8962_CLOCKING_4,
                            WM8962_SYSCLK_RATE_MASK, clocking4);
 
+       /* DSPCLK_DIV can be only generated correctly after enabling SYSCLK.
+        * So we here provisionally enable it and then disable it afterward
+        * if current bias_level hasn't reached SND_SOC_BIAS_ON.
+        */
+       if (codec->dapm.bias_level != SND_SOC_BIAS_ON)
+               snd_soc_update_bits(codec, WM8962_CLOCKING2,
+                               WM8962_SYSCLK_ENA_MASK, WM8962_SYSCLK_ENA);
+
        dspclk = snd_soc_read(codec, WM8962_CLOCKING1);
+
+       if (codec->dapm.bias_level != SND_SOC_BIAS_ON)
+               snd_soc_update_bits(codec, WM8962_CLOCKING2,
+                               WM8962_SYSCLK_ENA_MASK, 0);
+
        if (dspclk < 0) {
                dev_err(codec->dev, "Failed to read DSPCLK: %d\n", dspclk);
                return;