char *mktemp ();
-static RETSIGTYPE cleanup ();
-static int tac ();
-static int tac_file ();
-static int tac_stdin ();
static char *xmalloc ();
static char *xrealloc ();
-static void output ();
-static void save_stdin ();
static void xwrite ();
int full_write ();
/* The compiled regular expression representing `separator'. */
static struct re_pattern_buffer compiled_separator;
+/* The name of a temporary file containing a copy of pipe input. */
+static char *tempfile;
+
/* If non-zero, display usage information and exit. */
static int show_help;
exit (status);
}
-void
-main (argc, argv)
- int argc;
- char **argv;
+static RETSIGTYPE
+cleanup ()
{
- const char *error_message; /* Return value from re_compile_pattern. */
- int optc, errors;
- int have_read_stdin = 0;
+ unlink (tempfile);
+ exit (1);
+}
- program_name = argv[0];
- errors = 0;
- separator = "\n";
- sentinel_length = 1;
- separator_ends_record = 1;
+/* Allocate N bytes of memory dynamically, with error checking. */
- while ((optc = getopt_long (argc, argv, "brs:", longopts, (int *) 0))
- != EOF)
- {
- switch (optc)
- {
- case 0:
- break;
- case 'b':
- separator_ends_record = 0;
- break;
- case 'r':
- sentinel_length = 0;
- break;
- case 's':
- separator = optarg;
- if (*separator == 0)
- error (1, 0, _("separator cannot be empty"));
- break;
- default:
- usage (1);
- }
- }
+static char *
+xmalloc (n)
+ unsigned n;
+{
+ char *p;
- if (show_version)
+ p = malloc (n);
+ if (p == 0)
{
- printf ("tac - %s\n", version_string);
- exit (0);
+ error (0, 0, _("virtual memory exhausted"));
+ cleanup ();
}
+ return p;
+}
- if (show_help)
- usage (0);
+/* Change the size of memory area P to N bytes, with error checking. */
- if (sentinel_length == 0)
+static char *
+xrealloc (p, n)
+ char *p;
+ unsigned n;
+{
+ p = realloc (p, n);
+ if (p == 0)
{
- compiled_separator.allocated = 100;
- compiled_separator.buffer = (unsigned char *)
- xmalloc (compiled_separator.allocated);
- compiled_separator.fastmap = xmalloc (256);
- compiled_separator.translate = 0;
- error_message = re_compile_pattern (separator, strlen (separator),
- &compiled_separator);
- if (error_message)
- error (1, 0, "%s", error_message);
+ error (0, 0, _("virtual memory exhausted"));
+ cleanup ();
}
- else
- match_length = sentinel_length = strlen (separator);
+ return p;
+}
- read_size = INITIAL_READSIZE;
- /* A precaution that will probably never be needed. */
- while (sentinel_length * 2 >= read_size)
- read_size *= 2;
- buffer_size = read_size * 2 + sentinel_length + 2;
- buffer = xmalloc (buffer_size);
- if (sentinel_length)
+static void
+xwrite (desc, buffer, size)
+ int desc;
+ char *buffer;
+ int size;
+{
+ if (full_write (desc, buffer, size) < 0)
{
- strcpy (buffer, separator);
- buffer += sentinel_length;
+ error (0, errno, _("write error"));
+ cleanup ();
}
- else
- ++buffer;
+}
- if (optind == argc)
+/* Print the characters from START to PAST_END - 1.
+ If START is NULL, just flush the buffer. */
+
+static void
+output (start, past_end)
+ char *start;
+ char *past_end;
+{
+ static char buffer[WRITESIZE];
+ static int bytes_in_buffer = 0;
+ int bytes_to_add = past_end - start;
+ int bytes_available = WRITESIZE - bytes_in_buffer;
+
+ if (start == 0)
{
- have_read_stdin = 1;
- errors = tac_stdin ();
+ xwrite (STDOUT_FILENO, buffer, bytes_in_buffer);
+ bytes_in_buffer = 0;
+ return;
}
- else
- for (; optind < argc; ++optind)
- {
- if (strcmp (argv[optind], "-") == 0)
- {
- have_read_stdin = 1;
- errors |= tac_stdin ();
- }
- else
- errors |= tac_file (argv[optind]);
- }
- /* Flush the output buffer. */
- output ((char *) NULL, (char *) NULL);
+ /* Write out as many full buffers as possible. */
+ while (bytes_to_add >= bytes_available)
+ {
+ memcpy (buffer + bytes_in_buffer, start, bytes_available);
+ bytes_to_add -= bytes_available;
+ start += bytes_available;
+ xwrite (STDOUT_FILENO, buffer, WRITESIZE);
+ bytes_in_buffer = 0;
+ bytes_available = WRITESIZE;
+ }
- if (have_read_stdin && close (0) < 0)
- error (1, errno, "-");
- if (close (1) < 0)
- error (1, errno, _("write error"));
- exit (errors);
+ memcpy (buffer + bytes_in_buffer, start, bytes_to_add);
+ bytes_in_buffer += bytes_to_add;
}
-/* The name of a temporary file containing a copy of pipe input. */
-char *tempfile;
-
-/* Print the standard input in reverse, saving it to temporary
- file `tempfile' first if it is a pipe.
+/* Print in reverse the file open on descriptor FD for reading FILE.
Return 0 if ok, 1 if an error occurs. */
static int
-tac_stdin ()
+tac (fd, file)
+ int fd;
+ char *file;
{
- /* Previous values of signal handlers. */
- RETSIGTYPE (*sigint) (), (*sighup) (), (*sigpipe) (), (*sigterm) ();
- int errors;
- struct stat stats;
-#ifdef SA_INTERRUPT
- struct sigaction oldact, newact;
-#endif /* SA_INTERRUPT */
+ /* Pointer to the location in `buffer' where the search for
+ the next separator will begin. */
+ char *match_start;
+ /* Pointer to one past the rightmost character in `buffer' that
+ has not been printed yet. */
+ char *past_end;
+ unsigned saved_record_size; /* Length of the record growing in `buffer'. */
+ off_t file_pos; /* Offset in the file of the next read. */
+ /* Nonzero if `output' has not been called yet for any file.
+ Only used when the separator is attached to the preceding record. */
+ int first_time = 1;
+ char first_char = *separator; /* Speed optimization, non-regexp. */
+ char *separator1 = separator + 1; /* Speed optimization, non-regexp. */
+ int match_length1 = match_length - 1; /* Speed optimization, non-regexp. */
+ struct re_registers regs;
- /* No tempfile is needed for "tac < file".
- Use fstat instead of checking for errno == ESPIPE because
- lseek doesn't work on some special files but doesn't return an
- error, either. */
- if (fstat (0, &stats))
+ /* Find the size of the input file. */
+ file_pos = lseek (fd, (off_t) 0, SEEK_END);
+ if (file_pos < 1)
+ return 0; /* It's an empty file. */
+
+ /* Arrange for the first read to lop off enough to leave the rest of the
+ file a multiple of `read_size'. Since `read_size' can change, this may
+ not always hold during the program run, but since it usually will, leave
+ it here for i/o efficiency (page/sector boundaries and all that).
+ Note: the efficiency gain has not been verified. */
+ saved_record_size = file_pos % read_size;
+ if (saved_record_size == 0)
+ saved_record_size = read_size;
+ file_pos -= saved_record_size;
+ /* `file_pos' now points to the start of the last (probably partial) block
+ in the input file. */
+
+ lseek (fd, file_pos, SEEK_SET);
+ if (safe_read (fd, buffer, saved_record_size) != saved_record_size)
{
- error (0, errno, _("standard input"));
+ error (0, errno, "%s", file);
return 1;
}
- if (S_ISREG (stats.st_mode))
- return tac (0, _("standard input"));
-
-#ifdef SA_INTERRUPT
- newact.sa_handler = cleanup;
- sigemptyset (&newact.sa_mask);
- newact.sa_flags = 0;
-
- sigaction (SIGINT, NULL, &oldact);
- sigint = oldact.sa_handler;
- if (sigint != SIG_IGN)
- sigaction (SIGINT, &newact, NULL);
-
- sigaction (SIGHUP, NULL, &oldact);
- sighup = oldact.sa_handler;
- if (sighup != SIG_IGN)
- sigaction (SIGHUP, &newact, NULL);
- sigaction (SIGPIPE, NULL, &oldact);
- sigpipe = oldact.sa_handler;
- if (sigpipe != SIG_IGN)
- sigaction (SIGPIPE, &newact, NULL);
+ match_start = past_end = buffer + saved_record_size;
+ /* For non-regexp search, move past impossible positions for a match. */
+ if (sentinel_length)
+ match_start -= match_length1;
- sigaction (SIGTERM, NULL, &oldact);
- sigterm = oldact.sa_handler;
- if (sigterm != SIG_IGN)
- sigaction (SIGTERM, &newact, NULL);
-#else /* !SA_INTERRUPT */
- sigint = signal (SIGINT, SIG_IGN);
- if (sigint != SIG_IGN)
- signal (SIGINT, cleanup);
-
- sighup = signal (SIGHUP, SIG_IGN);
- if (sighup != SIG_IGN)
- signal (SIGHUP, cleanup);
-
- sigpipe = signal (SIGPIPE, SIG_IGN);
- if (sigpipe != SIG_IGN)
- signal (SIGPIPE, cleanup);
-
- sigterm = signal (SIGTERM, SIG_IGN);
- if (sigterm != SIG_IGN)
- signal (SIGTERM, cleanup);
-#endif /* SA_INTERRUPT */
-
- save_stdin ();
-
- errors = tac_file (tempfile);
-
- unlink (tempfile);
-
-#ifdef SA_INTERRUPT
- newact.sa_handler = sigint;
- sigaction (SIGINT, &newact, NULL);
- newact.sa_handler = sighup;
- sigaction (SIGHUP, &newact, NULL);
- newact.sa_handler = sigterm;
- sigaction (SIGTERM, &newact, NULL);
- newact.sa_handler = sigpipe;
- sigaction (SIGPIPE, &newact, NULL);
-#else /* !SA_INTERRUPT */
- signal (SIGINT, sigint);
- signal (SIGHUP, sighup);
- signal (SIGTERM, sigterm);
- signal (SIGPIPE, sigpipe);
-#endif /* SA_INTERRUPT */
-
- return errors;
-}
-
-/* Make a copy of the standard input in `tempfile'. */
-
-static void
-save_stdin ()
-{
- static char *template = NULL;
- static char *tempdir;
- int fd;
- int bytes_read;
-
- if (template == NULL)
- {
- tempdir = getenv ("TMPDIR");
- if (tempdir == NULL)
- tempdir = DEFAULT_TMPDIR;
- template = xmalloc (strlen (tempdir) + 11);
- }
- sprintf (template, "%s/tacXXXXXX", tempdir);
- tempfile = mktemp (template);
-
- fd = creat (tempfile, 0600);
- if (fd == -1)
- {
- error (0, errno, "%s", tempfile);
- cleanup ();
- }
- while ((bytes_read = safe_read (0, buffer, read_size)) > 0)
- if (full_write (fd, buffer, bytes_read) < 0)
- {
- error (0, errno, "%s", tempfile);
- cleanup ();
- }
- if (close (fd) < 0)
- {
- error (0, errno, "%s", tempfile);
- cleanup ();
- }
- if (bytes_read == -1)
- {
- error (0, errno, _("read error"));
- cleanup ();
- }
-}
-
-/* Print FILE in reverse.
- Return 0 if ok, 1 if an error occurs. */
-
-static int
-tac_file (file)
- char *file;
-{
- int fd, errors;
-
- fd = open (file, O_RDONLY);
- if (fd == -1)
- {
- error (0, errno, "%s", file);
- return 1;
- }
- errors = tac (fd, file);
- if (close (fd) < 0)
- {
- error (0, errno, "%s", file);
- return 1;
- }
- return errors;
-}
-
-/* Print in reverse the file open on descriptor FD for reading FILE.
- Return 0 if ok, 1 if an error occurs. */
-
-static int
-tac (fd, file)
- int fd;
- char *file;
-{
- /* Pointer to the location in `buffer' where the search for
- the next separator will begin. */
- char *match_start;
- /* Pointer to one past the rightmost character in `buffer' that
- has not been printed yet. */
- char *past_end;
- unsigned saved_record_size; /* Length of the record growing in `buffer'. */
- off_t file_pos; /* Offset in the file of the next read. */
- /* Nonzero if `output' has not been called yet for any file.
- Only used when the separator is attached to the preceding record. */
- int first_time = 1;
- char first_char = *separator; /* Speed optimization, non-regexp. */
- char *separator1 = separator + 1; /* Speed optimization, non-regexp. */
- int match_length1 = match_length - 1; /* Speed optimization, non-regexp. */
- struct re_registers regs;
-
- /* Find the size of the input file. */
- file_pos = lseek (fd, (off_t) 0, SEEK_END);
- if (file_pos < 1)
- return 0; /* It's an empty file. */
-
- /* Arrange for the first read to lop off enough to leave the rest of the
- file a multiple of `read_size'. Since `read_size' can change, this may
- not always hold during the program run, but since it usually will, leave
- it here for i/o efficiency (page/sector boundaries and all that).
- Note: the efficiency gain has not been verified. */
- saved_record_size = file_pos % read_size;
- if (saved_record_size == 0)
- saved_record_size = read_size;
- file_pos -= saved_record_size;
- /* `file_pos' now points to the start of the last (probably partial) block
- in the input file. */
-
- lseek (fd, file_pos, SEEK_SET);
- if (safe_read (fd, buffer, saved_record_size) != saved_record_size)
- {
- error (0, errno, "%s", file);
- return 1;
- }
-
- match_start = past_end = buffer + saved_record_size;
- /* For non-regexp search, move past impossible positions for a match. */
- if (sentinel_length)
- match_start -= match_length1;
-
- for (;;)
- {
- /* Search backward from `match_start' - 1 to `buffer' for a match
- with `separator'; for speed, use strncmp if `separator' contains no
- metacharacters.
- If the match succeeds, set `match_start' to point to the start of
- the match and `match_length' to the length of the match.
- Otherwise, make `match_start' < `buffer'. */
- if (sentinel_length == 0)
- {
- int i = match_start - buffer;
- int ret;
+ for (;;)
+ {
+ /* Search backward from `match_start' - 1 to `buffer' for a match
+ with `separator'; for speed, use strncmp if `separator' contains no
+ metacharacters.
+ If the match succeeds, set `match_start' to point to the start of
+ the match and `match_length' to the length of the match.
+ Otherwise, make `match_start' < `buffer'. */
+ if (sentinel_length == 0)
+ {
+ int i = match_start - buffer;
+ int ret;
ret = re_search (&compiled_separator, buffer, i, i - 1, -i, ®s);
if (ret == -1)
}
}
-/* Print the characters from START to PAST_END - 1.
- If START is NULL, just flush the buffer. */
+/* Print FILE in reverse.
+ Return 0 if ok, 1 if an error occurs. */
-static void
-output (start, past_end)
- char *start;
- char *past_end;
+static int
+tac_file (file)
+ char *file;
{
- static char buffer[WRITESIZE];
- static int bytes_in_buffer = 0;
- int bytes_to_add = past_end - start;
- int bytes_available = WRITESIZE - bytes_in_buffer;
+ int fd, errors;
- if (start == 0)
+ fd = open (file, O_RDONLY);
+ if (fd == -1)
{
- xwrite (STDOUT_FILENO, buffer, bytes_in_buffer);
- bytes_in_buffer = 0;
- return;
+ error (0, errno, "%s", file);
+ return 1;
}
-
- /* Write out as many full buffers as possible. */
- while (bytes_to_add >= bytes_available)
+ errors = tac (fd, file);
+ if (close (fd) < 0)
{
- memcpy (buffer + bytes_in_buffer, start, bytes_available);
- bytes_to_add -= bytes_available;
- start += bytes_available;
- xwrite (STDOUT_FILENO, buffer, WRITESIZE);
- bytes_in_buffer = 0;
- bytes_available = WRITESIZE;
+ error (0, errno, "%s", file);
+ return 1;
}
-
- memcpy (buffer + bytes_in_buffer, start, bytes_to_add);
- bytes_in_buffer += bytes_to_add;
+ return errors;
}
-static RETSIGTYPE
-cleanup ()
-{
- unlink (tempfile);
- exit (1);
-}
+/* Make a copy of the standard input in `tempfile'. */
static void
-xwrite (desc, buffer, size)
- int desc;
- char *buffer;
- int size;
+save_stdin ()
{
- if (full_write (desc, buffer, size) < 0)
+ static char *template = NULL;
+ static char *tempdir;
+ int fd;
+ int bytes_read;
+
+ if (template == NULL)
{
- error (0, errno, _("write error"));
+ tempdir = getenv ("TMPDIR");
+ if (tempdir == NULL)
+ tempdir = DEFAULT_TMPDIR;
+ template = xmalloc (strlen (tempdir) + 11);
+ }
+ sprintf (template, "%s/tacXXXXXX", tempdir);
+ tempfile = mktemp (template);
+
+ fd = creat (tempfile, 0600);
+ if (fd == -1)
+ {
+ error (0, errno, "%s", tempfile);
+ cleanup ();
+ }
+ while ((bytes_read = safe_read (0, buffer, read_size)) > 0)
+ if (full_write (fd, buffer, bytes_read) < 0)
+ {
+ error (0, errno, "%s", tempfile);
+ cleanup ();
+ }
+ if (close (fd) < 0)
+ {
+ error (0, errno, "%s", tempfile);
+ cleanup ();
+ }
+ if (bytes_read == -1)
+ {
+ error (0, errno, _("read error"));
cleanup ();
}
}
-/* Allocate N bytes of memory dynamically, with error checking. */
+/* Print the standard input in reverse, saving it to temporary
+ file `tempfile' first if it is a pipe.
+ Return 0 if ok, 1 if an error occurs. */
-static char *
-xmalloc (n)
- unsigned n;
+static int
+tac_stdin ()
{
- char *p;
+ /* Previous values of signal handlers. */
+ RETSIGTYPE (*sigint) (), (*sighup) (), (*sigpipe) (), (*sigterm) ();
+ int errors;
+ struct stat stats;
+#ifdef SA_INTERRUPT
+ struct sigaction oldact, newact;
+#endif /* SA_INTERRUPT */
- p = malloc (n);
- if (p == 0)
+ /* No tempfile is needed for "tac < file".
+ Use fstat instead of checking for errno == ESPIPE because
+ lseek doesn't work on some special files but doesn't return an
+ error, either. */
+ if (fstat (0, &stats))
{
- error (0, 0, _("virtual memory exhausted"));
- cleanup ();
+ error (0, errno, _("standard input"));
+ return 1;
}
- return p;
-}
+ if (S_ISREG (stats.st_mode))
+ return tac (0, _("standard input"));
-/* Change the size of memory area P to N bytes, with error checking. */
+#ifdef SA_INTERRUPT
+ newact.sa_handler = cleanup;
+ sigemptyset (&newact.sa_mask);
+ newact.sa_flags = 0;
-static char *
-xrealloc (p, n)
- char *p;
- unsigned n;
+ sigaction (SIGINT, NULL, &oldact);
+ sigint = oldact.sa_handler;
+ if (sigint != SIG_IGN)
+ sigaction (SIGINT, &newact, NULL);
+
+ sigaction (SIGHUP, NULL, &oldact);
+ sighup = oldact.sa_handler;
+ if (sighup != SIG_IGN)
+ sigaction (SIGHUP, &newact, NULL);
+
+ sigaction (SIGPIPE, NULL, &oldact);
+ sigpipe = oldact.sa_handler;
+ if (sigpipe != SIG_IGN)
+ sigaction (SIGPIPE, &newact, NULL);
+
+ sigaction (SIGTERM, NULL, &oldact);
+ sigterm = oldact.sa_handler;
+ if (sigterm != SIG_IGN)
+ sigaction (SIGTERM, &newact, NULL);
+#else /* !SA_INTERRUPT */
+ sigint = signal (SIGINT, SIG_IGN);
+ if (sigint != SIG_IGN)
+ signal (SIGINT, cleanup);
+
+ sighup = signal (SIGHUP, SIG_IGN);
+ if (sighup != SIG_IGN)
+ signal (SIGHUP, cleanup);
+
+ sigpipe = signal (SIGPIPE, SIG_IGN);
+ if (sigpipe != SIG_IGN)
+ signal (SIGPIPE, cleanup);
+
+ sigterm = signal (SIGTERM, SIG_IGN);
+ if (sigterm != SIG_IGN)
+ signal (SIGTERM, cleanup);
+#endif /* SA_INTERRUPT */
+
+ save_stdin ();
+
+ errors = tac_file (tempfile);
+
+ unlink (tempfile);
+
+#ifdef SA_INTERRUPT
+ newact.sa_handler = sigint;
+ sigaction (SIGINT, &newact, NULL);
+ newact.sa_handler = sighup;
+ sigaction (SIGHUP, &newact, NULL);
+ newact.sa_handler = sigterm;
+ sigaction (SIGTERM, &newact, NULL);
+ newact.sa_handler = sigpipe;
+ sigaction (SIGPIPE, &newact, NULL);
+#else /* !SA_INTERRUPT */
+ signal (SIGINT, sigint);
+ signal (SIGHUP, sighup);
+ signal (SIGTERM, sigterm);
+ signal (SIGPIPE, sigpipe);
+#endif /* SA_INTERRUPT */
+
+ return errors;
+}
+
+void
+main (argc, argv)
+ int argc;
+ char **argv;
{
- p = realloc (p, n);
- if (p == 0)
+ const char *error_message; /* Return value from re_compile_pattern. */
+ int optc, errors;
+ int have_read_stdin = 0;
+
+ program_name = argv[0];
+ errors = 0;
+ separator = "\n";
+ sentinel_length = 1;
+ separator_ends_record = 1;
+
+ while ((optc = getopt_long (argc, argv, "brs:", longopts, (int *) 0))
+ != EOF)
{
- error (0, 0, _("virtual memory exhausted"));
- cleanup ();
+ switch (optc)
+ {
+ case 0:
+ break;
+ case 'b':
+ separator_ends_record = 0;
+ break;
+ case 'r':
+ sentinel_length = 0;
+ break;
+ case 's':
+ separator = optarg;
+ if (*separator == 0)
+ error (1, 0, _("separator cannot be empty"));
+ break;
+ default:
+ usage (1);
+ }
}
- return p;
+
+ if (show_version)
+ {
+ printf ("tac - %s\n", version_string);
+ exit (0);
+ }
+
+ if (show_help)
+ usage (0);
+
+ if (sentinel_length == 0)
+ {
+ compiled_separator.allocated = 100;
+ compiled_separator.buffer = (unsigned char *)
+ xmalloc (compiled_separator.allocated);
+ compiled_separator.fastmap = xmalloc (256);
+ compiled_separator.translate = 0;
+ error_message = re_compile_pattern (separator, strlen (separator),
+ &compiled_separator);
+ if (error_message)
+ error (1, 0, "%s", error_message);
+ }
+ else
+ match_length = sentinel_length = strlen (separator);
+
+ read_size = INITIAL_READSIZE;
+ /* A precaution that will probably never be needed. */
+ while (sentinel_length * 2 >= read_size)
+ read_size *= 2;
+ buffer_size = read_size * 2 + sentinel_length + 2;
+ buffer = xmalloc (buffer_size);
+ if (sentinel_length)
+ {
+ strcpy (buffer, separator);
+ buffer += sentinel_length;
+ }
+ else
+ ++buffer;
+
+ if (optind == argc)
+ {
+ have_read_stdin = 1;
+ errors = tac_stdin ();
+ }
+ else
+ for (; optind < argc; ++optind)
+ {
+ if (strcmp (argv[optind], "-") == 0)
+ {
+ have_read_stdin = 1;
+ errors |= tac_stdin ();
+ }
+ else
+ errors |= tac_file (argv[optind]);
+ }
+
+ /* Flush the output buffer. */
+ output ((char *) NULL, (char *) NULL);
+
+ if (have_read_stdin && close (0) < 0)
+ error (1, errno, "-");
+ if (close (1) < 0)
+ error (1, errno, _("write error"));
+ exit (errors);
}