u32 pad_ctrl1; /* 0x204 */
u32 pll_ctrl; /* 0x208 */
u32 pll_dbg0; /* 0x20c */
+ u32 pll_dbg1; /* 0x210 */
+ u32 hpd_cec; /* 0x214 */
+ u8 res1[0x28]; /* 0x218 */
+ u32 spd_pkt; /* 0x240 */
+ u8 res2[0xac]; /* 0x244 */
+ u32 pkt_ctrl0; /* 0x2f0 */
+ u32 pkt_ctrl1; /* 0x2f4 */
+ u8 res3[0x18]; /* 0x2f8 */
+ u32 audio_sample_count; /* 0x310 */
+ u8 res4[0xec]; /* 0x314 */
+ u32 audio_tx_fifo; /* 0x400 */
+ u8 res5[0xfc]; /* 0x404 */
+#ifndef CONFIG_MACH_SUN6I
+ u32 ddc_ctrl; /* 0x500 */
+ u32 ddc_addr; /* 0x504 */
+ u32 ddc_int_mask; /* 0x508 */
+ u32 ddc_int_status; /* 0x50c */
+ u32 ddc_fifo_ctrl; /* 0x510 */
+ u32 ddc_fifo_status; /* 0x514 */
+ u32 ddc_fifo_data; /* 0x518 */
+ u32 ddc_byte_count; /* 0x51c */
+ u32 ddc_cmnd; /* 0x520 */
+ u32 ddc_exreg; /* 0x524 */
+ u32 ddc_clock; /* 0x528 */
+ u8 res6[0x14]; /* 0x52c */
+ u32 ddc_line_ctrl; /* 0x540 */
+#else
+ u32 ddc_ctrl; /* 0x500 */
+ u32 ddc_exreg; /* 0x504 */
+ u32 ddc_cmnd; /* 0x508 */
+ u32 ddc_addr; /* 0x50c */
+ u32 ddc_int_mask; /* 0x510 */
+ u32 ddc_int_status; /* 0x514 */
+ u32 ddc_fifo_ctrl; /* 0x518 */
+ u32 ddc_fifo_status; /* 0x51c */
+ u32 ddc_clock; /* 0x520 */
+ u32 ddc_timeout; /* 0x524 */
+ u8 res6[0x18]; /* 0x528 */
+ u32 ddc_dbg; /* 0x540 */
+ u8 res7[0x3c]; /* 0x544 */
+ u32 ddc_fifo_data; /* 0x580 */
+#endif
};
/*
#define SUNXI_HDMI_PLL_DBG0_PLL3 (0 << 21)
#define SUNXI_HDMI_PLL_DBG0_PLL7 (1 << 21)
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HMDI_DDC_CTRL_ENABLE (1 << 0)
+#define SUNXI_HMDI_DDC_CTRL_SCL_ENABLE (1 << 4)
+#define SUNXI_HMDI_DDC_CTRL_SDA_ENABLE (1 << 6)
+#define SUNXI_HMDI_DDC_CTRL_START (1 << 27)
+#define SUNXI_HMDI_DDC_CTRL_RESET (1 << 31)
+#else
+#define SUNXI_HMDI_DDC_CTRL_RESET (1 << 0)
+/* sun4i / sun5i / sun7i do not have a separate line_ctrl reg */
+#define SUNXI_HMDI_DDC_CTRL_SDA_ENABLE 0
+#define SUNXI_HMDI_DDC_CTRL_SCL_ENABLE 0
+#define SUNXI_HMDI_DDC_CTRL_START (1 << 30)
+#define SUNXI_HMDI_DDC_CTRL_ENABLE (1 << 31)
+#endif
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HMDI_DDC_ADDR_SLAVE_ADDR (0xa0 << 0)
+#else
+#define SUNXI_HMDI_DDC_ADDR_SLAVE_ADDR (0x50 << 0)
+#endif
+#define SUNXI_HMDI_DDC_ADDR_OFFSET(n) (((n) & 0xff) << 8)
+#define SUNXI_HMDI_DDC_ADDR_EDDC_ADDR (0x60 << 16)
+#define SUNXI_HMDI_DDC_ADDR_EDDC_SEGMENT(n) ((n) << 24)
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_DDC_FIFO_CTRL_CLEAR (1 << 15)
+#else
+#define SUNXI_HDMI_DDC_FIFO_CTRL_CLEAR (1 << 31)
+#endif
+
+#define SUNXI_HDMI_DDC_CMND_EXPLICIT_EDDC_READ 6
+#define SUNXI_HDMI_DDC_CMND_IMPLICIT_EDDC_READ 7
+
+#ifdef CONFIG_MACH_SUN6I
+#define SUNXI_HDMI_DDC_CLOCK 0x61
+#else
+/* N = 5,M=1 Fscl= Ftmds/2/10/2^N/(M+1) */
+#define SUNXI_HDMI_DDC_CLOCK 0x0d
+#endif
+
+#define SUNXI_HMDI_DDC_LINE_CTRL_SCL_ENABLE (1 << 8)
+#define SUNXI_HMDI_DDC_LINE_CTRL_SDA_ENABLE (1 << 9)
+
int sunxi_simplefb_setup(void *blob);
#endif /* _SUNXI_DISPLAY_H */
#include <asm/arch/display.h>
#include <asm/global_data.h>
#include <asm/io.h>
+#include <errno.h>
#include <fdtdec.h>
#include <fdt_support.h>
#include <video_fb.h>
bool enabled;
} sunxi_display;
+/*
+ * Wait up to 200ms for value to be set in given part of reg.
+ */
+static int await_completion(u32 *reg, u32 mask, u32 val)
+{
+ unsigned long tmo = timer_get_us() + 200000;
+
+ while ((readl(reg) & mask) != val) {
+ if (timer_get_us() > tmo) {
+ printf("DDC: timeout reading EDID\n");
+ return -ETIME;
+ }
+ }
+ return 0;
+}
+
static int sunxi_hdmi_hpd_detect(void)
{
struct sunxi_ccm_reg * const ccm =
clock_set_pll3(0);
}
+static int sunxi_hdmi_ddc_do_command(u32 cmnd, int offset, int n)
+{
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+
+ setbits_le32(&hdmi->ddc_fifo_ctrl, SUNXI_HDMI_DDC_FIFO_CTRL_CLEAR);
+ writel(SUNXI_HMDI_DDC_ADDR_EDDC_SEGMENT(offset >> 8) |
+ SUNXI_HMDI_DDC_ADDR_EDDC_ADDR |
+ SUNXI_HMDI_DDC_ADDR_OFFSET(offset) |
+ SUNXI_HMDI_DDC_ADDR_SLAVE_ADDR, &hdmi->ddc_addr);
+#ifndef CONFIG_MACH_SUN6I
+ writel(n, &hdmi->ddc_byte_count);
+ writel(cmnd, &hdmi->ddc_cmnd);
+#else
+ writel(n << 16 | cmnd, &hdmi->ddc_cmnd);
+#endif
+ setbits_le32(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_START);
+
+ return await_completion(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_START, 0);
+}
+
+static int sunxi_hdmi_ddc_read(int offset, u8 *buf, int count)
+{
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+ int i, n;
+
+ while (count > 0) {
+ if (count > 16)
+ n = 16;
+ else
+ n = count;
+
+ if (sunxi_hdmi_ddc_do_command(
+ SUNXI_HDMI_DDC_CMND_EXPLICIT_EDDC_READ,
+ offset, n))
+ return -ETIME;
+
+ for (i = 0; i < n; i++)
+ *buf++ = readb(&hdmi->ddc_fifo_data);
+
+ offset += n;
+ count -= n;
+ }
+
+ return 0;
+}
+
+static int sunxi_hdmi_edid_get_mode(struct ctfb_res_modes *mode)
+{
+ struct edid1_info edid1;
+ struct edid_detailed_timing *t =
+ (struct edid_detailed_timing *)edid1.monitor_details.timing;
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ int i, r, retries = 2;
+
+ /* SUNXI_HDMI_CTRL_ENABLE & PAD_CTRL0 are already set by hpd_detect */
+ writel(SUNXI_HDMI_PAD_CTRL1 | SUNXI_HDMI_PAD_CTRL1_HALVE,
+ &hdmi->pad_ctrl1);
+ writel(SUNXI_HDMI_PLL_CTRL | SUNXI_HDMI_PLL_CTRL_DIV(15),
+ &hdmi->pll_ctrl);
+ writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0);
+
+ /* Reset i2c controller */
+ setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_DDC_GATE);
+ writel(SUNXI_HMDI_DDC_CTRL_ENABLE |
+ SUNXI_HMDI_DDC_CTRL_SDA_ENABLE |
+ SUNXI_HMDI_DDC_CTRL_SCL_ENABLE |
+ SUNXI_HMDI_DDC_CTRL_RESET, &hdmi->ddc_ctrl);
+ if (await_completion(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_RESET, 0))
+ return -EIO;
+
+ writel(SUNXI_HDMI_DDC_CLOCK, &hdmi->ddc_clock);
+#ifndef CONFIG_MACH_SUN6I
+ writel(SUNXI_HMDI_DDC_LINE_CTRL_SDA_ENABLE |
+ SUNXI_HMDI_DDC_LINE_CTRL_SCL_ENABLE, &hdmi->ddc_line_ctrl);
+#endif
+
+ do {
+ r = sunxi_hdmi_ddc_read(0, (u8 *)&edid1, 128);
+ if (r)
+ continue;
+ r = edid_check_checksum((u8 *)&edid1);
+ if (r) {
+ printf("EDID: checksum error%s\n",
+ retries ? ", retrying" : "");
+ }
+ } while (r && retries--);
+
+ /* Disable DDC engine, no longer needed */
+ clrbits_le32(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_ENABLE);
+ clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_DDC_GATE);
+
+ if (r)
+ return r;
+
+ r = edid_check_info(&edid1);
+ if (r) {
+ printf("EDID: invalid EDID data\n");
+ return -EINVAL;
+ }
+
+ /* We want version 1.3 or 1.2 with detailed timing info */
+ if (edid1.version != 1 || (edid1.revision < 3 &&
+ !EDID1_INFO_FEATURE_PREFERRED_TIMING_MODE(edid1))) {
+ printf("EDID: unsupported version %d.%d\n",
+ edid1.version, edid1.revision);
+ return -EINVAL;
+ }
+
+ /* Take the first usable detailed timing */
+ for (i = 0; i < 4; i++, t++) {
+ r = video_edid_dtd_to_ctfb_res_modes(t, mode);
+ if (r == 0)
+ break;
+ }
+ if (i == 4) {
+ printf("EDID: no usable detailed timing found\n");
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
/*
* This is the entity that mixes and matches the different layers and inputs.
* Allwinner calls it the back-end, but i like composer better.
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
const struct ctfb_res_modes *mode;
+ struct ctfb_res_modes edid_mode;
const char *options;
unsigned int depth;
- int ret, hpd;
+ int ret, hpd, edid;
memset(&sunxi_display, 0, sizeof(struct sunxi_display));
video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode, &depth, &options);
hpd = video_get_option_int(options, "hpd", 1);
+ edid = video_get_option_int(options, "edid", 1);
/* Always call hdp_detect, as it also enables various clocks, etc. */
ret = sunxi_hdmi_hpd_detect();
if (ret)
printf("HDMI connected: ");
+ /* Check edid if requested and we've a cable plugged in */
+ if (edid && ret) {
+ if (sunxi_hdmi_edid_get_mode(&edid_mode) == 0)
+ mode = &edid_mode;
+ }
+
if (mode->vmode != FB_VMODE_NONINTERLACED) {
printf("Only non-interlaced modes supported, falling back to 1024x768\n");
mode = &res_mode_init[RES_MODE_1024x768];
projects / platform / kernel / u-boot.git / commitdiff