staging: comedi: adl_pci9118: tidy up the interrupt control/status register
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Thu, 4 Sep 2014 19:14:26 +0000 (12:14 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 8 Sep 2014 20:55:54 +0000 (13:55 -0700)
The register at offset 0x38 is the "interrupt control" register when written
and the "interrupt status" register when read. Both registers use the same
bit defines.

For aesthetics, use a common define for this register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/adl_pci9118.c

index 266eb3f..dd7faed 100644 (file)
 #define PCI9118_AI_CFG_AM              (1 << 1)  /* 1=about trigger */
 #define PCI9118_AI_CFG_START           (1 << 0)  /* 1=trigger start */
 #define PCI9118_FIFO_RESET_REG         0x34
+#define PCI9118_INT_CTRL_REG           0x38
 
-#define PCI9118_INTSRC 0x38    /* R:   interrupt reason register */
-#define PCI9118_INTCTRL        0x38    /* W:   interrupt control register */
-
-/* bits for interrupt reason and control (PCI9118_INTSRC, PCI9118_INTCTRL) */
+/* bits for interrupt reason and control (PCI9118_INT_CTRL_REG) */
 /* 1=interrupt occur, enable source,  0=interrupt not occur, disable source */
 #define Int_Timer      0x08    /* timer interrupt */
 #define Int_About      0x04    /* about trigger complete */
@@ -659,7 +657,7 @@ static int pci9118_exttrg_add(struct comedi_device *dev, unsigned char source)
                return -1;                              /* incorrect source */
        devpriv->exttrg_users |= (1 << source);
        devpriv->IntControlReg |= Int_DTrg;
-       outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
+       outl(devpriv->IntControlReg, dev->iobase + PCI9118_INT_CTRL_REG);
        outl(inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR) | 0x1f00,
                                        devpriv->iobase_a + AMCC_OP_REG_INTCSR);
                                                        /* allow INT in AMCC */
@@ -680,7 +678,8 @@ static int pci9118_exttrg_del(struct comedi_device *dev, unsigned char source)
                                        (~0x00001f00),
                                        devpriv->iobase_a + AMCC_OP_REG_INTCSR);
                                                /* disable int in AMCC */
-               outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
+               outl(devpriv->IntControlReg,
+                    dev->iobase + PCI9118_INT_CTRL_REG);
        }
        return 0;
 }
@@ -981,7 +980,7 @@ static irqreturn_t pci9118_interrupt(int irq, void *d)
        if (!dev->attached)
                return IRQ_NONE;
 
-       intsrc = inl(dev->iobase + PCI9118_INTSRC) & 0xf;
+       intsrc = inl(dev->iobase + PCI9118_INT_CTRL_REG) & 0xf;
        intcsr = inl(devpriv->iobase_a + AMCC_OP_REG_INTCSR);
 
        if (!intsrc && !(intcsr & ANY_S593X_INT))
@@ -1039,7 +1038,7 @@ static int pci9118_ai_inttrig(struct comedi_device *dev,
        devpriv->ai12_startstop &= ~START_AI_INT;
        s->async->inttrig = NULL;
 
-       outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
+       outl(devpriv->IntControlReg, dev->iobase + PCI9118_INT_CTRL_REG);
        outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_AI_CFG_REG);
        if (devpriv->ai_do != 3) {
                pci9118_start_pacer(dev, devpriv->ai_do);
@@ -1391,13 +1390,15 @@ static int pci9118_ai_docmd_sampl(struct comedi_device *dev,
                                                        /* allow INT in AMCC */
 
        if (!(devpriv->ai12_startstop & (START_AI_EXT | START_AI_INT))) {
-               outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
+               outl(devpriv->IntControlReg,
+                    dev->iobase + PCI9118_INT_CTRL_REG);
                outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_AI_CFG_REG);
                if (devpriv->ai_do != 3) {
                        pci9118_start_pacer(dev, devpriv->ai_do);
                        devpriv->AdControlReg |= PCI9118_AI_CTRL_SOFTG;
                }
-               outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
+               outl(devpriv->IntControlReg,
+                    dev->iobase + PCI9118_INT_CTRL_REG);
        }
 
        return 0;
@@ -1460,7 +1461,8 @@ static int pci9118_ai_docmd_dma(struct comedi_device *dev,
 
        if (!(devpriv->ai12_startstop & (START_AI_EXT | START_AI_INT))) {
                outl(devpriv->AdFunctionReg, dev->iobase + PCI9118_AI_CFG_REG);
-               outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
+               outl(devpriv->IntControlReg,
+                    dev->iobase + PCI9118_INT_CTRL_REG);
                if (devpriv->ai_do != 3) {
                        pci9118_start_pacer(dev, devpriv->ai_do);
                        devpriv->AdControlReg |= PCI9118_AI_CTRL_SOFTG;
@@ -1653,7 +1655,7 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
        /* clear A/D and INT status registers */
        inl(dev->iobase + PCI9118_AI_STATUS_REG);
-       inl(dev->iobase + PCI9118_INTSRC);
+       inl(dev->iobase + PCI9118_INT_CTRL_REG);
 
        devpriv->ai_act_scan = 0;
        devpriv->ai_act_dmapos = 0;
@@ -1673,9 +1675,9 @@ static int pci9118_reset(struct comedi_device *dev)
 
        devpriv->IntControlReg = 0;
        devpriv->exttrg_users = 0;
-       inl(dev->iobase + PCI9118_INTCTRL);
-       outl(devpriv->IntControlReg, dev->iobase + PCI9118_INTCTRL);
-                                               /* disable interrupts source */
+       /* clear interrupts then disable all interrupt sources */
+       inl(dev->iobase + PCI9118_INT_CTRL_REG);
+       outl(devpriv->IntControlReg, dev->iobase + PCI9118_INT_CTRL_REG);
        pci9118_timer_set_mode(dev, 0, I8254_MODE0);
        pci9118_start_pacer(dev, 0);            /* stop 8254 counters */
        devpriv->AdControlReg = 0;
@@ -1710,10 +1712,11 @@ static int pci9118_reset(struct comedi_device *dev)
        udelay(10);
        inl(dev->iobase + PCI9118_AI_FIFO_REG);
        pci9118_ai_reset_fifo(dev);
-       outl(0, dev->iobase + PCI9118_INTSRC);  /* remove INT requests */
+       /* disable all interrupt sources */
+       outl(0, dev->iobase + PCI9118_INT_CTRL_REG);
        /* clear A/D and INT status registers */
        inl(dev->iobase + PCI9118_AI_STATUS_REG);
-       inl(dev->iobase + PCI9118_INTSRC);
+       inl(dev->iobase + PCI9118_INT_CTRL_REG);
        devpriv->AdControlReg = 0;
        outl(devpriv->AdControlReg, dev->iobase + PCI9118_AI_CTRL_REG);
                                                /*