spi: rockchip: precompute rx sample delay

Now that we no longer potentially change spi clock
at runtime we can precompute the rx sample delay
at probe time rather than for each transfer.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index d1b3ba2..5fe6099 100644 (file)
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -94,6 +94,7 @@
 #define CR0_BHT_8BIT                           0x1
 
 #define CR0_RSD_OFFSET                         14
+#define CR0_RSD_MAX                            0x3
 
 #define CR0_FRF_OFFSET                         16
 #define CR0_FRF_SPI                                    0x0
@@ -179,7 +180,7 @@ struct rockchip_spi {
        u32 freq;
 
        u8 n_bytes;
-       u32 rsd_nsecs;
+       u8 rsd;
 
        const void *tx;
        const void *tx_end;
@@ -450,13 +451,13 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
                bool use_dma)
 {
        u32 dmacr = 0;
-       int rsd = 0;
 
        u32 cr0 = CR0_FRF_SPI  << CR0_FRF_OFFSET
                | CR0_BHT_8BIT << CR0_BHT_OFFSET
                | CR0_SSD_ONE  << CR0_SSD_OFFSET
                | CR0_EM_BIG   << CR0_EM_OFFSET;
 
+       cr0 |= rs->rsd << CR0_RSD_OFFSET;
        cr0 |= (rs->n_bytes << CR0_DFS_OFFSET);
        cr0 |= (spi->mode & 0x3U) << CR0_SCPH_OFFSET;
 
@@ -474,20 +475,6 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
                        dmacr |= RF_DMA_EN;
        }
 
-       /* Rx sample delay is expressed in parent clock cycles (max 3) */
-       rsd = DIV_ROUND_CLOSEST(rs->rsd_nsecs * (rs->freq >> 8),
-                               1000000000 >> 8);
-       if (!rsd && rs->rsd_nsecs) {
-               pr_warn_once("rockchip-spi: %u Hz are too slow to express %u ns delay\n",
-                            rs->freq, rs->rsd_nsecs);
-       } else if (rsd > 3) {
-               rsd = 3;
-               pr_warn_once("rockchip-spi: %u Hz are too fast to express %u ns delay, clamping at %u ns\n",
-                            rs->freq, rs->rsd_nsecs,
-                            rsd * 1000000000U / rs->freq);
-       }
-       cr0 |= rsd << CR0_RSD_OFFSET;
-
        writel_relaxed(cr0, rs->regs + ROCKCHIP_SPI_CTRLR0);
 
        if (rs->n_bytes == 1)
@@ -620,8 +607,21 @@ static int rockchip_spi_probe(struct platform_device *pdev)
        rs->freq = clk_get_rate(rs->spiclk);
 
        if (!of_property_read_u32(pdev->dev.of_node, "rx-sample-delay-ns",
-                                 &rsd_nsecs))
-               rs->rsd_nsecs = rsd_nsecs;
+                                 &rsd_nsecs)) {
+               /* rx sample delay is expressed in parent clock cycles (max 3) */
+               u32 rsd = DIV_ROUND_CLOSEST(rsd_nsecs * (rs->freq >> 8),
+                               1000000000 >> 8);
+               if (!rsd) {
+                       dev_warn(rs->dev, "%u Hz are too slow to express %u ns delay\n",
+                                       rs->freq, rsd_nsecs);
+               } else if (rsd > CR0_RSD_MAX) {
+                       rsd = CR0_RSD_MAX;
+                       dev_warn(rs->dev, "%u Hz are too fast to express %u ns delay, clamping at %u ns\n",
+                                       rs->freq, rsd_nsecs,
+                                       CR0_RSD_MAX * 1000000000U / rs->freq);
+               }
+               rs->rsd = rsd;
+       }
 
        rs->fifo_len = get_fifo_len(rs);
        if (!rs->fifo_len) {