sunxi: OrangePi Zero: defconfig: enable SPI flash

Newer OrangePi Zero boards all come with 16 Mib SPI flash soldered, from
which the board can actually boot from.
Enable the SPL support for the SPI controller and SPI flash to allow
putting the SPL, the DT and U-Boot proper into there. This will let
a board boot without an SD card inserted.
The flash chip can be written with a version of the sunxi-fel tool.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Priit Laes <plaes@plaes.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig
index 8813927bc1a931419cc7cacab724962cda0c8a9a..abb3fcf307ba4a71a4656cfad8324b08c210ba92 100644 (file)
--- a/configs/orangepi_zero_defconfig
+++ b/configs/orangepi_zero_defconfig
@@ -13,3 +13,5 @@ CONFIG_SPL=y
 # CONFIG_CMD_FPGA is not set
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_SPL_SPI_SUNXI=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y