[PATCH] SPI: spi whitespace fixes

This removes superfluous whitespace in the <linux/spi/spi.h> header.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index caa4665..0820067 100644 (file)
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -36,15 +36,15 @@ extern struct bus_type spi_bus_type;
  * @mode: The spi mode defines how data is clocked out and in.
  *     This may be changed by the device's driver.
  * @bits_per_word: Data transfers involve one or more words; word sizes
- *     like eight or 12 bits are common.  In-memory wordsizes are
+ *     like eight or 12 bits are common.  In-memory wordsizes are
  *     powers of two bytes (e.g. 20 bit samples use 32 bits).
  *     This may be changed by the device's driver.
  *     The spi_transfer.bits_per_word can override this for each transfer.
  * @irq: Negative, or the number passed to request_irq() to receive
- *     interrupts from this device.
+ *     interrupts from this device.
  * @controller_state: Controller's runtime state
  * @controller_data: Board-specific definitions for controller, such as
- *     FIFO initialization parameters; from board_info.controller_data
+ *     FIFO initialization parameters; from board_info.controller_data
  *
  * An spi_device is used to interchange data between an SPI slave
  * (usually a discrete chip) and CPU memory.
@@ -145,13 +145,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  * struct spi_master - interface to SPI master controller
  * @cdev: class interface to this driver
  * @bus_num: board-specific (and often SOC-specific) identifier for a
- *     given SPI controller.
+ *     given SPI controller.
  * @num_chipselect: chipselects are used to distinguish individual
- *     SPI slaves, and are numbered from zero to num_chipselects.
- *     each slave has a chipselect signal, but it's common that not
- *     every chipselect is connected to a slave.
+ *     SPI slaves, and are numbered from zero to num_chipselects.
+ *     each slave has a chipselect signal, but it's common that not
+ *     every chipselect is connected to a slave.
  * @setup: updates the device mode and clocking records used by a
- *     device's SPI controller; protocol code may call this.
+ *     device's SPI controller; protocol code may call this.
  * @transfer: adds a message to the controller's transfer queue.
  * @cleanup: frees controller-specific state
  *
@@ -276,8 +276,8 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
  *      for this transfer. If 0 the default (from spi_device) is used.
  * @cs_change: affects chipselect after this transfer completes
  * @delay_usecs: microseconds to delay after this transfer before
- *     (optionally) changing the chipselect status, then starting
- *     the next transfer or completing this spi_message.
+ *     (optionally) changing the chipselect status, then starting
+ *     the next transfer or completing this spi_message.
  * @transfer_list: transfers are sequenced through spi_message.transfers
  *
  * SPI transfers always write the same number of bytes as they read.
@@ -364,7 +364,7 @@ struct spi_transfer {
  * and its transfers, ignore them until its completion callback.
  */
 struct spi_message {
-       struct list_head        transfers;
+       struct list_head        transfers;
 
        struct spi_device       *spi;
 
@@ -382,7 +382,7 @@ struct spi_message {
         */
 
        /* completion is reported through a callback */
-       void                    (*complete)(void *context);
+       void                    (*complete)(void *context);
        void                    *context;
        unsigned                actual_length;
        int                     status;