These boards have not been converted to CONFIG_DM_PCI by the deadline.
Remove them.
Signed-off-by: Tom Rini <trini@konsulko.com>
bool "Support caddy2"
select ARCH_MPC8349
-config TARGET_MPC8313ERDB_NOR
- bool "Support MPC8313ERDB_NOR"
- select ARCH_MPC8313
- select BOARD_EARLY_INIT_F
- select SUPPORT_SPL
-
-config TARGET_MPC8313ERDB_NAND
- bool "Support MPC8313ERDB_NAND"
- select ARCH_MPC8313
- select BOARD_EARLY_INIT_F
- select SUPPORT_SPL
-
config TARGET_MPC8315ERDB
bool "Support MPC8315ERDB"
select ARCH_MPC8315
bool
source "board/esd/vme8349/Kconfig"
-source "board/freescale/mpc8313erdb/Kconfig"
source "board/freescale/mpc8315erdb/Kconfig"
source "board/freescale/mpc8323erdb/Kconfig"
source "board/freescale/mpc832xemds/Kconfig"
+++ /dev/null
-if TARGET_MPC8313ERDB_NOR
-
-config SYS_BOARD
- default "mpc8313erdb"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "MPC8313ERDB_NOR"
-
-endif
-
-if TARGET_MPC8313ERDB_NAND
-
-config SYS_BOARD
- default "mpc8313erdb"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "MPC8313ERDB_NAND"
-
-endif
+++ /dev/null
-MPC8313ERDB BOARD
-#M: -
-S: Maintained
-F: board/freescale/mpc8313erdb/
-F: include/configs/MPC8313ERDB.h
-F: configs/MPC8313ERDB_33_defconfig
-F: configs/MPC8313ERDB_66_defconfig
-F: configs/MPC8313ERDB_NAND_33_defconfig
-F: configs/MPC8313ERDB_NAND_66_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y := mpc8313erdb.o sdram.o
+++ /dev/null
-Freescale MPC8313ERDB Board
------------------------------------------
-
-1. Board Switches and Jumpers
-
- S3 is used to set CONFIG_SYS_RESET_SOURCE.
-
- To boot the image at 0xFE000000 in NOR flash, use these DIP
- switch settings for S3 S4:
-
- +------+ +------+
- | | | **** |
- | **** | | |
- +------+ ON +------+ ON
- 4321 4321
- (where the '*' indicates the position of the tab of the switch.)
-
- To boot the image at the beginning of NAND flash, use these
- DIP switch settings for S3 S4:
-
- +------+ +------+
- | * | | *** |
- | *** | | * |
- +------+ ON +------+ ON
- 4321 4321
- (where the '*' indicates the position of the tab of the switch.)
-
- When booting from NAND, use u-boot-nand.bin, not u-boot.bin.
-
-2. Memory Map
- The memory map looks like this:
-
- 0x0000_0000 0x07ff_ffff DDR 128M
- 0x8000_0000 0x8fff_ffff PCI MEM 256M
- 0x9000_0000 0x9fff_ffff PCI_MMIO 256M
- 0xe000_0000 0xe00f_ffff IMMR 1M
- 0xe200_0000 0xe20f_ffff PCI IO 16M
- 0xe280_0000 0xe280_7fff NAND FLASH (CS1) 32K
- 0xf000_0000 0xf001_ffff VSC7385 (CS2) 128K
- 0xfa00_0000 0xfa00_7fff Board Status/ 32K
- LED Control (CS3)
- 0xfe00_0000 0xfe7f_ffff NOR FLASH (CS0) 8M
-
- When booting from NAND, NAND flash is CS0 and NOR flash
- is CS1.
-
-3. Definitions
-
-3.1 Explanation of NEW definitions in:
-
- include/configs/MPC8313ERDB.h
-
- CONFIG_MPC83xx MPC83xx family
- CONFIG_MPC831x MPC831x specific
- CONFIG_MPC8313ERDB MPC8313ERDB board specific
-
-4. Compilation
-
- Assuming you're using BASH (or similar) as your shell:
-
- export CROSS_COMPILE=your-cross-compiler-prefix-
- make distclean
- make MPC8313ERDB_XXX_config
- (where XXX is:
- 33 - 33 MHz oscillator, boot from NOR flash
- 66 - 66 MHz oscillator, boot from NOR flash
- NAND_33 - 33 MHz oscillator, boot from NAND flash
- NAND_66 - 66 MHz oscillator, boot from NAND flash)
- make
-
-5. Downloading and Flashing Images
-
-5.1 Reflash U-Boot Image using U-Boot
-
- NOR flash:
-
- =>run tftpflash
-
- You may want to try
- =>tftpboot $loadaddr $uboot
- first, to make sure that the TFTP load will succeed before it
- goes ahead and wipes out your current firmware. And of course,
- have an alternate means of programming the flash available
- if the new U-Boot doesn't boot.
-
- NAND flash:
-
- =>tftpboot $loadaddr <filename>
- =>nand erase 0 0x80000
- =>nand write $loadaddr 0 0x80000
-
- ...where 0x80000 is the filesize rounded up to
- the next 0x20000 increment.
-
-5.2 Downloading and Booting Linux Kernel
-
- Ensure that all networking-related environment variables are set
- properly (including ipaddr, serverip, gatewayip (if needed),
- netmask, ethaddr, eth1addr, rootpath (if using NFS root),
- fdtfile, and bootfile).
-
- Then, do one of the following, depending on whether you
- want an NFS root or a ramdisk root:
-
- =>run nfsboot
- or
- =>run ramboot
-
-6 Notes
-
- The console baudrate for MPC8313ERDB is 115200bps.
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006-2007
- *
- * Author: Scott Wood <scottwood@freescale.com>
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <fdt_support.h>
-#include <init.h>
-#if defined(CONFIG_OF_LIBFDT)
-#include <linux/libfdt.h>
-#endif
-#include <pci.h>
-#include <mpc83xx.h>
-#include <vsc7385.h>
-#include <ns16550.h>
-#include <nand.h>
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
-#include <asm/gpio.h>
-#endif
-#include <asm/global_data.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
- if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
- gd->flags |= GD_FLG_SILENT;
-#endif
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
- mpc83xx_gpio_init_f();
-#endif
-
- return 0;
-}
-
-int board_early_init_r(void)
-{
-#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD)
- mpc83xx_gpio_init_r();
-#endif
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: Freescale MPC8313ERDB\n");
- return 0;
-}
-
-#ifndef CONFIG_SPL_BUILD
-static struct pci_region pci_regions[] = {
- {
- .bus_start = CONFIG_SYS_PCI1_MEM_BASE,
- .phys_start = CONFIG_SYS_PCI1_MEM_PHYS,
- .size = CONFIG_SYS_PCI1_MEM_SIZE,
- .flags = PCI_REGION_MEM | PCI_REGION_PREFETCH
- },
- {
- .bus_start = CONFIG_SYS_PCI1_MMIO_BASE,
- .phys_start = CONFIG_SYS_PCI1_MMIO_PHYS,
- .size = CONFIG_SYS_PCI1_MMIO_SIZE,
- .flags = PCI_REGION_MEM
- },
- {
- .bus_start = CONFIG_SYS_PCI1_IO_BASE,
- .phys_start = CONFIG_SYS_PCI1_IO_PHYS,
- .size = CONFIG_SYS_PCI1_IO_SIZE,
- .flags = PCI_REGION_IO
- }
-};
-
-void pci_init_board(void)
-{
- volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
- volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
- struct pci_region *reg[] = { pci_regions };
-
- /* Enable all 3 PCI_CLK_OUTPUTs. */
- clk->occr |= 0xe0000000;
-
- /*
- * Configure PCI Local Access Windows
- */
- pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
- pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
-
- pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
- pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
-
- mpc83xx_pci_init(1, reg);
-}
-
-/*
- * Miscellaneous late-boot configurations
- *
- * If a VSC7385 microcode image is present, then upload it.
-*/
-int misc_init_r(void)
-{
- int rc = 0;
-
-#ifdef CONFIG_VSC7385_IMAGE
- if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
- CONFIG_VSC7385_IMAGE_SIZE)) {
- puts("Failure uploading VSC7385 microcode.\n");
- rc = 1;
- }
-#endif
-
- return rc;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
- ft_pci_setup(blob, bd);
-#endif
-
- return 0;
-}
-#endif
-#else /* CONFIG_SPL_BUILD */
-void board_init_f(ulong bootflag)
-{
- board_early_init_f();
- ns16550_init((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500),
- CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
- puts("NAND boot... ");
- timer_init();
- dram_init();
- relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd,
- CONFIG_SYS_NAND_U_BOOT_RELOC);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
- nand_boot();
-}
-
-void putc(char c)
-{
- if (gd->flags & GD_FLG_SILENT)
- return;
-
- if (c == '\n')
- ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), '\r');
-
- ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), c);
-}
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006-2007
- *
- * Authors: Nick.Spence@freescale.com
- * Wilson.Lo@freescale.com
- * scottwood@freescale.com
- */
-
-#include <common.h>
-#include <init.h>
-#include <mpc83xx.h>
-#include <spd_sdram.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-#include <asm/bitops.h>
-#include <asm/io.h>
-
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
-static void resume_from_sleep(void)
-{
- u32 magic = *(u32 *)0;
-
- typedef void (*func_t)(void);
- func_t resume = *(func_t *)4;
-
- if (magic == 0xf5153ae5)
- resume();
-
- gd->flags &= ~GD_FLG_SILENT;
- puts("\nResume from sleep failed: bad magic word\n");
-}
-#endif
-
-/* Fixed sdram init -- doesn't use serial presence detect.
- *
- * This is useful for faster booting in configs where the RAM is unlikely
- * to be changed, or for things like NAND booting where space is tight.
- */
-static long fixed_sdram(void)
-{
- u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
-
-#ifndef CONFIG_SYS_RAMBOOT
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- u32 msize_log2 = __ilog2(msize);
-
- im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000;
- im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
- im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
-
- /*
- * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
- * or the DDR2 controller may fail to initialize correctly.
- */
- __udelay(50000);
-
-#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0)
-#warning Chip select bounds is only configurable in 16MB increments
-#endif
- im->ddr.csbnds[0].csbnds =
- ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
- (((CONFIG_SYS_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) &
- CSBNDS_EA);
- im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-
- /* Currently we use only one CS, so disable the other bank. */
- im->ddr.cs_config[1] = 0;
-
- im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
- im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
- im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
- im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-
-#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
- if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
- im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG | SDRAM_CFG_BI;
- else
-#endif
- im->ddr.sdram_cfg = CONFIG_SYS_SDRAM_CFG;
-
- im->ddr.sdram_cfg2 = CONFIG_SYS_SDRAM_CFG2;
- im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
- im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE_2;
-
- im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
- sync();
-
- /* enable DDR controller */
- im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-#endif
-
- return msize;
-}
-
-int dram_init(void)
-{
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile fsl_lbc_t *lbc = &im->im_lbc;
- u32 msize;
-
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
- return -ENXIO;
-
- /* DDR SDRAM - Main SODIMM */
- msize = fixed_sdram();
-
- /* Local Bus setup lbcr and mrtpr */
- lbc->lbcr = (0x00040000 | (0xFF << LBCR_BMT_SHIFT) | 0xF);
- /* LB refresh timer prescal, 266MHz/32 */
- lbc->mrtpr = 0x20000000;
- sync();
-
-#ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC
- if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
- resume_from_sleep();
-#endif
-
- /* return total bus SDRAM size(bytes) -- DDR */
- gd->ram_size = msize;
-
- return 0;
-}
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_CLK_FREQ=33333333
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8313ERDB_NOR=y
-CONFIG_SYSTEM_PLL_FACTOR_5_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_RGMII=y
-CONFIG_TSEC2_MODE_RGMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="DDR"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI1_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI1_MMIO_BASE"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_16_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2800000
-CONFIG_LBLAW1_NAME="NAND"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_LBLAW2=y
-CONFIG_LBLAW2_BASE=0xF0000000
-CONFIG_LBLAW2_NAME="VSC7385"
-CONFIG_LBLAW2_LENGTH_128_KBYTES=y
-CONFIG_LBLAW3=y
-CONFIG_LBLAW3_BASE=0xFA000000
-CONFIG_LBLAW3_NAME="BCSR"
-CONFIG_LBLAW3_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_SCY_9=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_EHTR_1_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE2800000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="BCSR"
-CONFIG_BR3_OR3_BASE=0xFA000000
-CONFIG_OR3_SCY_15=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_DPM=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ"
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_ADDR=0xFE080000
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_CLK_FREQ=66666667
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8313ERDB_NOR=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_RGMII=y
-CONFIG_TSEC2_MODE_RGMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="DDR"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI1_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI1_MMIO_BASE"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_16_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2800000
-CONFIG_LBLAW1_NAME="NAND"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_LBLAW2=y
-CONFIG_LBLAW2_BASE=0xF0000000
-CONFIG_LBLAW2_NAME="VSC7385"
-CONFIG_LBLAW2_LENGTH_128_KBYTES=y
-CONFIG_LBLAW3=y
-CONFIG_LBLAW3_BASE=0xFA000000
-CONFIG_LBLAW3_NAME="BCSR"
-CONFIG_LBLAW3_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_SCY_9=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_EHTR_1_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE2800000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="BCSR"
-CONFIG_BR3_OR3_BASE=0xFA000000
-CONFIG_OR3_SCY_15=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_DPM=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ"
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_ADDR=0xFE080000
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00100000
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x80000
-CONFIG_SPL_TEXT_BASE=0xFFF00000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x90000
-CONFIG_SYS_CLK_FREQ=33333333
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8313ERDB_NAND=y
-CONFIG_SYSTEM_PLL_FACTOR_5_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL=y
-CONFIG_TSEC1_MODE_RGMII=y
-CONFIG_TSEC2_MODE_RGMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="DDR"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI1_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI1_MMIO_BASE"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_NAND_LBLAWBAR_PRELIM_1=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_16_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2800000
-CONFIG_LBLAW1_NAME="NAND"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_LBLAW2=y
-CONFIG_LBLAW2_BASE=0xF0000000
-CONFIG_LBLAW2_NAME="VSC7385"
-CONFIG_LBLAW2_LENGTH_128_KBYTES=y
-CONFIG_LBLAW3=y
-CONFIG_LBLAW3_BASE=0xFA000000
-CONFIG_LBLAW3_NAME="BCSR"
-CONFIG_LBLAW3_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="NAND"
-CONFIG_BR0_OR0_BASE=0xE2800000
-CONFIG_BR0_ERRORCHECKING_BOTH=y
-CONFIG_BR0_MACHINE_FCM=y
-CONFIG_OR0_SCY_1=y
-CONFIG_OR0_CSCT_8_CYCLE=y
-CONFIG_OR0_CST_ONE_CLOCK=y
-CONFIG_OR0_CHT_TWO_CLOCK=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FLASH"
-CONFIG_BR1_OR1_BASE=0xFE000000
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_8_MBYTES=y
-CONFIG_OR1_SCY_9=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_EHTR_1_CYCLE=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="BCSR"
-CONFIG_BR3_OR3_BASE=0xFA000000
-CONFIG_OR3_SCY_15=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_DPM=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ"
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_MISC_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
-CONFIG_ENV_OVERWRITE=y
-# CONFIG_ENV_IS_IN_FLASH is not set
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
+++ /dev/null
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00100000
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x80000
-CONFIG_SPL_TEXT_BASE=0xFFF00000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x90000
-CONFIG_SYS_CLK_FREQ=66666667
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8313ERDB_NAND=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL=y
-CONFIG_TSEC1_MODE_RGMII=y
-CONFIG_TSEC2_MODE_RGMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="DDR"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI1_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI1_MMIO_BASE"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_NAND_LBLAWBAR_PRELIM_1=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_16_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2800000
-CONFIG_LBLAW1_NAME="NAND"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_LBLAW2=y
-CONFIG_LBLAW2_BASE=0xF0000000
-CONFIG_LBLAW2_NAME="VSC7385"
-CONFIG_LBLAW2_LENGTH_128_KBYTES=y
-CONFIG_LBLAW3=y
-CONFIG_LBLAW3_BASE=0xFA000000
-CONFIG_LBLAW3_NAME="BCSR"
-CONFIG_LBLAW3_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="NAND"
-CONFIG_BR0_OR0_BASE=0xE2800000
-CONFIG_BR0_ERRORCHECKING_BOTH=y
-CONFIG_BR0_MACHINE_FCM=y
-CONFIG_OR0_SCY_1=y
-CONFIG_OR0_CSCT_8_CYCLE=y
-CONFIG_OR0_CST_ONE_CLOCK=y
-CONFIG_OR0_CHT_TWO_CLOCK=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="FLASH"
-CONFIG_BR1_OR1_BASE=0xFE000000
-CONFIG_BR1_PORTSIZE_16BIT=y
-CONFIG_OR1_AM_8_MBYTES=y
-CONFIG_OR1_SCY_9=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_EHTR_1_CYCLE=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="BCSR"
-CONFIG_BR3_OR3_BASE=0xFA000000
-CONFIG_OR3_SCY_15=y
-CONFIG_OR3_CSNT_EARLIER=y
-CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR3_XACS_EXTENDED=y
-CONFIG_OR3_TRLX_RELAXED=y
-CONFIG_OR3_EHTR_8_CYCLE=y
-CONFIG_OR3_EAD_EXTRA=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_DPM=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_LCRR_EADC_1=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ"
-CONFIG_BOOTDELAY=6
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_MISC_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=e2800000.flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e2800000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
-CONFIG_ENV_OVERWRITE=y
-# CONFIG_ENV_IS_IN_FLASH is not set
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
- */
-/*
- * mpc8313epb board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300 1
-
-#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SPL_MAX_SIZE (4 * 1024)
-#define CONFIG_SPL_PAD_TO 0x4000
-
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
-#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#endif
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
-/*
- * On-board devices
- *
- * TSEC1 is VSC switch
- * TSEC2 is SoC TSEC
- */
-#define CONFIG_VSC7385_ENET
-#define CONFIG_TSEC2
-
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR
-#endif
-
-/* Early revs of this board will lock up hard when attempting
- * to access the PMC registers, unless a JTAG debugger is
- * connected, or some resistor modifications are made.
- */
-#define CONFIG_SYS_8313ERDB_BROKEN_PMC 1
-
-/*
- * Device configurations
- */
-
-/* Vitesse 7385 */
-
-#ifdef CONFIG_VSC7385_ENET
-
-#define CONFIG_TSEC1
-
-/* The flash address and size of the VSC7385 firmware image */
-#define CONFIG_VSC7385_IMAGE 0xFE7FE000
-#define CONFIG_VSC7385_IMAGE_SIZE 8192
-
-#endif
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/
-
-/*
- * Manually set up DDR parameters, as this board does not
- * seem to have the SPD connected to I2C.
- */
-#define CONFIG_SYS_DDR_SIZE 128 /* MB */
-#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
- | CSCONFIG_ODT_RD_NEVER \
- | CSCONFIG_ODT_WR_ONLY_CURRENT \
- | CSCONFIG_ROW_BIT_13 \
- | CSCONFIG_COL_BIT_10)
- /* 0x80010102 */
-
-#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
- | (0 << TIMING_CFG0_WRT_SHIFT) \
- | (0 << TIMING_CFG0_RRT_SHIFT) \
- | (0 << TIMING_CFG0_WWT_SHIFT) \
- | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
- | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
- | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
- | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
- /* 0x00220802 */
-#define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
- | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \
- | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
- | (5 << TIMING_CFG1_CASLAT_SHIFT) \
- | (10 << TIMING_CFG1_REFREC_SHIFT) \
- | (3 << TIMING_CFG1_WRREC_SHIFT) \
- | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
- | (2 << TIMING_CFG1_WRTORD_SHIFT))
- /* 0x3835a322 */
-#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
- | (5 << TIMING_CFG2_CPO_SHIFT) \
- | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
- | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
- | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
- | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
- | (6 << TIMING_CFG2_FOUR_ACT_SHIFT))
- /* 0x129048c6 */ /* P9-45,may need tuning */
-#define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \
- | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
- /* 0x05100500 */
-#if defined(CONFIG_DDR_2T_TIMING)
-#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \
- | SDRAM_CFG_SDRAM_TYPE_DDR2 \
- | SDRAM_CFG_DBW_32 \
- | SDRAM_CFG_2T_EN)
- /* 0x43088000 */
-#else
-#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \
- | SDRAM_CFG_SDRAM_TYPE_DDR2 \
- | SDRAM_CFG_DBW_32)
- /* 0x43080000 */
-#endif
-#define CONFIG_SYS_SDRAM_CFG2 0x00401000
-/* set burst length to 8 for 32-bit data path */
-#define CONFIG_SYS_DDR_MODE ((0x4448 << SDRAM_MODE_ESD_SHIFT) \
- | (0x0632 << SDRAM_MODE_SD_SHIFT))
- /* 0x44480632 */
-#define CONFIG_SYS_DDR_MODE_2 0x8000C000
-
-#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
- /*0x02000000*/
-#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
- | DDRCDR_PZ_NOMZ \
- | DDRCDR_NZ_NOMZ \
- | DDRCDR_M_ODR)
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */
-#define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
- !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
-
-/* drivers/mtd/nand/raw/nand.c */
-#if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_NAND_BASE 0xFFF00000
-#else
-#define CONFIG_SYS_NAND_BASE 0xE2800000
-#endif
-
-#define CONFIG_MTD_PARTITION
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_NAND_FSL_ELBC 1
-#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
-#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024)
-
-/* Still needed for spl_minimal.c */
-#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM
-#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM
-
-/* local bus write LED / read status buffer (BCSR) mapping */
-#define CONFIG_SYS_BCSR_ADDR 0xFA000000
-#define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */
- /* map at 0xFA000000 on LCS3 */
-
-/* Vitesse 7385 */
-
-#ifdef CONFIG_VSC7385_ENET
-
- /* VSC7385 Base address on LCS2 */
-#define CONFIG_SYS_VSC7385_BASE 0xF0000000
-#define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */
-
-
-#endif
-
-#define CONFIG_MPC83XX_GPIO 1
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED 400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
-
-/*
- * TSEC
- */
-
-#define CONFIG_GMII /* MII PHY management */
-
-#ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define TSEC1_PHY_ADDR 0x1c
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC1_PHYIDX 0
-#endif
-
-#ifdef CONFIG_TSEC2
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define TSEC2_PHY_ADDR 4
-#define TSEC2_FLAGS TSEC_GIGABIT
-#define TSEC2_PHYIDX 0
-#endif
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME "TSEC1"
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_DS1337
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-/*
- * Environment
- */
-#define CONFIG_ENV_RANGE (CONFIG_SYS_NAND_BLOCK_SIZE * 4)
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-
- /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
- /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
-
-#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0))
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */
- /* Enable Internal USB Phy and GPIO on LCD Connector */
-#define CONFIG_SYS_SICRL (SICRL_USBDR_10 | SICRL_LBC)
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_NETDEV "eth1"
-
-#define CONFIG_HOSTNAME "mpc8313erdb"
-#define CONFIG_ROOTPATH "/nfs/root/path"
-#define CONFIG_BOOTFILE "uImage"
- /* U-Boot image on TFTP server */
-#define CONFIG_UBOOTPATH "u-boot.bin"
-#define CONFIG_FDTFILE "mpc8313erdb.dtb"
-
- /* default location for tftp and bootm */
-#define CONFIG_LOADADDR 800000
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=" CONFIG_NETDEV "\0" \
- "ethprime=TSEC1\0" \
- "uboot=" CONFIG_UBOOTPATH "\0" \
- "tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize\0" \
- "fdtaddr=780000\0" \
- "fdtfile=" CONFIG_FDTFILE "\0" \
- "console=ttyS0\0" \
- "setbootargs=setenv bootargs " \
- "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
- "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\
- "$netdev:off " \
- "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv rootdev /dev/nfs;" \
- "run setbootargs;" \
- "run setipargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv rootdev /dev/ram;" \
- "run setbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
- */
-/*
- * mpc8313epb board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300 1
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
-#include <linux/stringify.h>
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
-/*
- * On-board devices
- *
- * TSEC1 is VSC switch
- * TSEC2 is SoC TSEC
- */
-#define CONFIG_VSC7385_ENET
-#define CONFIG_TSEC2
-
-/* Early revs of this board will lock up hard when attempting
- * to access the PMC registers, unless a JTAG debugger is
- * connected, or some resistor modifications are made.
- */
-#define CONFIG_SYS_8313ERDB_BROKEN_PMC 1
-
-/*
- * Device configurations
- */
-
-/* Vitesse 7385 */
-
-#ifdef CONFIG_VSC7385_ENET
-
-#define CONFIG_TSEC1
-
-/* The flash address and size of the VSC7385 firmware image */
-#define CONFIG_VSC7385_IMAGE 0xFE7FE000
-#define CONFIG_VSC7385_IMAGE_SIZE 8192
-
-#endif
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/
-
-/*
- * Manually set up DDR parameters, as this board does not
- * seem to have the SPD connected to I2C.
- */
-#define CONFIG_SYS_DDR_SIZE 128 /* MB */
-#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
- | CSCONFIG_ODT_RD_NEVER \
- | CSCONFIG_ODT_WR_ONLY_CURRENT \
- | CSCONFIG_ROW_BIT_13 \
- | CSCONFIG_COL_BIT_10)
- /* 0x80010102 */
-
-#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
- | (0 << TIMING_CFG0_WRT_SHIFT) \
- | (0 << TIMING_CFG0_RRT_SHIFT) \
- | (0 << TIMING_CFG0_WWT_SHIFT) \
- | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
- | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
- | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
- | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
- /* 0x00220802 */
-#define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
- | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \
- | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
- | (5 << TIMING_CFG1_CASLAT_SHIFT) \
- | (10 << TIMING_CFG1_REFREC_SHIFT) \
- | (3 << TIMING_CFG1_WRREC_SHIFT) \
- | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
- | (2 << TIMING_CFG1_WRTORD_SHIFT))
- /* 0x3835a322 */
-#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
- | (5 << TIMING_CFG2_CPO_SHIFT) \
- | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
- | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
- | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
- | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
- | (6 << TIMING_CFG2_FOUR_ACT_SHIFT))
- /* 0x129048c6 */ /* P9-45,may need tuning */
-#define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \
- | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
- /* 0x05100500 */
-#if defined(CONFIG_DDR_2T_TIMING)
-#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \
- | SDRAM_CFG_SDRAM_TYPE_DDR2 \
- | SDRAM_CFG_DBW_32 \
- | SDRAM_CFG_2T_EN)
- /* 0x43088000 */
-#else
-#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \
- | SDRAM_CFG_SDRAM_TYPE_DDR2 \
- | SDRAM_CFG_DBW_32)
- /* 0x43080000 */
-#endif
-#define CONFIG_SYS_SDRAM_CFG2 0x00401000
-/* set burst length to 8 for 32-bit data path */
-#define CONFIG_SYS_DDR_MODE ((0x4448 << SDRAM_MODE_ESD_SHIFT) \
- | (0x0632 << SDRAM_MODE_SD_SHIFT))
- /* 0x44480632 */
-#define CONFIG_SYS_DDR_MODE_2 0x8000C000
-
-#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
- /*0x02000000*/
-#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
- | DDRCDR_PZ_NOMZ \
- | DDRCDR_NZ_NOMZ \
- | DDRCDR_M_ODR)
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */
-#define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
- !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
-
-/* drivers/mtd/nand/nand.c */
-#define CONFIG_SYS_NAND_BASE 0xE2800000
-
-#define CONFIG_MTD_PARTITION
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_NAND_FSL_ELBC 1
-#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
-#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024)
-
-/* Still needed for spl_minimal.c */
-#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM
-#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM
-
-/* local bus write LED / read status buffer (BCSR) mapping */
-#define CONFIG_SYS_BCSR_ADDR 0xFA000000
-#define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */
- /* map at 0xFA000000 on LCS3 */
-/* Vitesse 7385 */
-
-#ifdef CONFIG_VSC7385_ENET
-
- /* VSC7385 Base address on LCS2 */
-#define CONFIG_SYS_VSC7385_BASE 0xF0000000
-#define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */
-
-
-#endif
-
-#define CONFIG_MPC83XX_GPIO 1
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED 400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
-
-/*
- * TSEC
- */
-
-#define CONFIG_GMII /* MII PHY management */
-
-#ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define TSEC1_PHY_ADDR 0x1c
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC1_PHYIDX 0
-#endif
-
-#ifdef CONFIG_TSEC2
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define TSEC2_PHY_ADDR 4
-#define TSEC2_FLAGS TSEC_GIGABIT
-#define TSEC2_PHYIDX 0
-#endif
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME "TSEC1"
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_DS1337
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-/*
- * Environment
- */
-#if !defined(CONFIG_SYS_RAMBOOT)
-/* Address and size of Redundant Environment Sector */
-#endif
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-
- /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
- /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
-
-#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0))
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */
- /* Enable Internal USB Phy and GPIO on LCD Connector */
-#define CONFIG_SYS_SICRL (SICRL_USBDR_10 | SICRL_LBC)
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_NETDEV "eth1"
-
-#define CONFIG_HOSTNAME "mpc8313erdb"
-#define CONFIG_ROOTPATH "/nfs/root/path"
-#define CONFIG_BOOTFILE "uImage"
- /* U-Boot image on TFTP server */
-#define CONFIG_UBOOTPATH "u-boot.bin"
-#define CONFIG_FDTFILE "mpc8313erdb.dtb"
-
- /* default location for tftp and bootm */
-#define CONFIG_LOADADDR 800000
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=" CONFIG_NETDEV "\0" \
- "ethprime=TSEC1\0" \
- "uboot=" CONFIG_UBOOTPATH "\0" \
- "tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize\0" \
- "fdtaddr=780000\0" \
- "fdtfile=" CONFIG_FDTFILE "\0" \
- "console=ttyS0\0" \
- "setbootargs=setenv bootargs " \
- "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
- "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\
- "$netdev:off " \
- "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv rootdev /dev/nfs;" \
- "run setbootargs;" \
- "run setipargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv rootdev /dev/ram;" \
- "run setbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / commitdiff