Add rudimentary handling of alternate settings of USB interfaces - to fix
authorBartlomiej Sieka <tur@semihalf.com>
Tue, 1 Aug 2006 22:54:18 +0000 (00:54 +0200)
committerBartlomiej Sieka <tur@semihalf.com>
Tue, 1 Aug 2006 22:54:18 +0000 (00:54 +0200)
problems with some USB storage devices. Some code readability improvements.

CHANGELOG
common/cmd_usb.c
common/usb.c
include/usb.h

index fb88164..e981116 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add rudimentary handling of alternate settings of USB interfaces.
+  This is in order to fix issues with some USB sticks or knives timing
+  out during initialisation. Some code readability improvements.
+
 * Enable buffered flash writes for TQM5200 board.
 
 * Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
index fdfd042..fcc6662 100644 (file)
@@ -186,7 +186,7 @@ void usb_display_conf_desc(struct usb_config_descriptor *config,struct usb_devic
 void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,struct usb_device *dev)
 {
        printf("     Interface: %d\n",ifdesc->bInterfaceNumber);
-       printf("     - Alternate Settings %d, Endpoints: %d\n",ifdesc->bAlternateSetting,ifdesc->bNumEndpoints);
+       printf("     - Alternate Setting %d, Endpoints: %d\n",ifdesc->bAlternateSetting,ifdesc->bNumEndpoints);
        printf("     - Class ");
        usb_display_class_sub(ifdesc->bInterfaceClass,ifdesc->bInterfaceSubClass,ifdesc->bInterfaceProtocol);
        printf("\n");
index d9515e6..b1b7aec 100644 (file)
@@ -280,56 +280,68 @@ int usb_set_maxpacket(struct usb_device *dev)
 int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
 {
        struct usb_descriptor_header *head;
-       int index,ifno,epno;
-       ifno=-1;
-       epno=-1;
-
-       dev->configno=cfgno;
-       head =(struct usb_descriptor_header *)&buffer[0];
-       if(head->bDescriptorType!=USB_DT_CONFIG) {
-               printf(" ERROR: NOT USB_CONFIG_DESC %x\n",head->bDescriptorType);
+       int index, ifno, epno, curr_if_num;
+       int i;
+       unsigned char *ch;
+
+       ifno = -1;
+       epno = -1;
+       curr_if_num = -1;
+
+       dev->configno = cfgno;
+       head = (struct usb_descriptor_header *) &buffer[0];
+       if(head->bDescriptorType != USB_DT_CONFIG) {
+               printf(" ERROR: NOT USB_CONFIG_DESC %x\n", head->bDescriptorType);
                return -1;
        }
-       memcpy(&dev->config,buffer,buffer[0]);
-       dev->config.wTotalLength=swap_16(dev->config.wTotalLength);
-       dev->config.no_of_if=0;
+       memcpy(&dev->config, buffer, buffer[0]);
+       dev->config.wTotalLength = swap_16(dev->config.wTotalLength);
+       dev->config.no_of_if = 0;
 
-       index=dev->config.bLength;
+       index = dev->config.bLength;
        /* Ok the first entry must be a configuration entry, now process the others */
-       head=(struct usb_descriptor_header *)&buffer[index];
-       while(index+1 < dev->config.wTotalLength) {
+       head = (struct usb_descriptor_header *) &buffer[index];
+       while(index + 1 < dev->config.wTotalLength) {
                switch(head->bDescriptorType) {
                        case USB_DT_INTERFACE:
-                               ifno=dev->config.no_of_if;
-                               dev->config.no_of_if++; /* found an interface desc, increase numbers */
-                               memcpy(&dev->config.if_desc[ifno],&buffer[index],buffer[index]); /* copy new desc */
-                               dev->config.if_desc[ifno].no_of_ep=0;
-
+                               if(((struct usb_interface_descriptor *) &buffer[index])->
+                                       bInterfaceNumber != curr_if_num) {
+                                       /* this is a new interface, copy new desc */
+                                       ifno = dev->config.no_of_if;
+                                       dev->config.no_of_if++;
+                                       memcpy(&dev->config.if_desc[ifno],
+                                               &buffer[index], buffer[index]);
+                                       dev->config.if_desc[ifno].no_of_ep = 0;
+                                       dev->config.if_desc[ifno].num_altsetting = 1;
+                                       curr_if_num = dev->config.if_desc[ifno].bInterfaceNumber;
+                               } else {
+                                       /* found alternate setting for the interface */
+                                       dev->config.if_desc[ifno].num_altsetting++;
+                               }
                                break;
                        case USB_DT_ENDPOINT:
-                               epno=dev->config.if_desc[ifno].no_of_ep;
+                               epno = dev->config.if_desc[ifno].no_of_ep;
                                dev->config.if_desc[ifno].no_of_ep++; /* found an endpoint */
-                               memcpy(&dev->config.if_desc[ifno].ep_desc[epno],&buffer[index],buffer[index]);
-                               dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize
-                                       =swap_16(dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize);
-                               USB_PRINTF("if %d, ep %d\n",ifno,epno);
+                               memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
+                                       &buffer[index], buffer[index]);
+                               dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize =
+                                       swap_16(dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize);
+                               USB_PRINTF("if %d, ep %d\n", ifno, epno);
                                break;
                        default:
-                               if(head->bLength==0)
+                               if(head->bLength == 0)
                                        return 1;
-                               USB_PRINTF("unknown Description Type : %x\n",head->bDescriptorType);
+                               USB_PRINTF("unknown Description Type : %x\n", head->bDescriptorType);
                                {
-                                       int i;
-                                       unsigned char *ch;
-                                       ch=(unsigned char *)head;
-                                       for(i=0;i<head->bLength; i++)
-                                               USB_PRINTF("%02X ",*ch++);
+                                       ch = (unsigned char *)head;
+                                       for(i = 0; i < head->bLength; i++)
+                                               USB_PRINTF("%02X ", *ch++);
                                        USB_PRINTF("\n\n\n");
                                }
                                break;
                }
-               index+=head->bLength;
-               head=(struct usb_descriptor_header *)&buffer[index];
+               index += head->bLength;
+               head = (struct usb_descriptor_header *)&buffer[index];
        }
        return 1;
 }
@@ -443,6 +455,14 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
                printf("selecting invalid interface %d", interface);
                return -1;
        }
+       /*
+        * We should return now for devices with only one alternate setting.
+        * According to 9.4.10 of the Universal Serial Bus Specification Revision 2.0
+        * such devices can return with a STALL. This results in some USB sticks
+        * timeouting during initialization and then being unusable in U-Boot.
+        */
+       if (if_face->num_altsetting == 1)
+               return 0;
 
        if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
            USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, alternate,
index 39d7f23..bf71554 100644 (file)
@@ -108,6 +108,7 @@ struct usb_interface_descriptor {
        unsigned char  iInterface;
 
        unsigned char  no_of_ep;
+       unsigned char  num_altsetting;
        unsigned char  act_altsetting;
        struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
 } __attribute__ ((packed));