This makes all comments consistent.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
/*
* Enable "slack" in the AML interpreter? Default is FALSE, and the
- * interpreter strictly follows the ACPI specification. Setting to TRUE
+ * interpreter strictly follows the ACPI specification. Setting to TRUE
* allows the interpreter to ignore certain errors and/or bad AML constructs.
*
* Currently, these features are enabled by this flag:
acpi_status(*acpi_internal_method) (struct acpi_walk_state * walk_state);
/*
- * Bitmapped ACPI types. Used internally only
+ * Bitmapped ACPI types. Used internally only
*/
#define ACPI_BTYPE_ANY 0x00000000
#define ACPI_BTYPE_INTEGER 0x00000001
};
/*
- * Thread state - one per thread across multiple walk states. Multiple walk
+ * Thread state - one per thread across multiple walk states. Multiple walk
* states are created when there are nested control methods executing.
*/
struct acpi_thread_state {
/******************************************************************************
*
- * Objects that can be notified. All share a common notify_info area.
+ * Objects that can be notified. All share a common notify_info area.
*
*****************************************************************************/
/******************************************************************************
*
- * Fields. All share a common header/info field.
+ * Fields. All share a common header/info field.
*
*****************************************************************************/
#define _UNK 0x6B
/*
- * Reserved ASCII characters. Do not use any of these for
+ * Reserved ASCII characters. Do not use any of these for
* internal opcodes, since they are used to differentiate
* name strings from AML opcodes
*/
#define _PFX 0x6D
/*
- * All AML opcodes and the parse-time arguments for each. Used by the AML
+ * All AML opcodes and the parse-time arguments for each. Used by the AML
* parser Each list is compressed into a 32-bit number and stored in the
* master opcode table (in psopcode.c).
*/
#define ARGP_ZERO_OP ARG_NONE
/*
- * All AML opcodes and the runtime arguments for each. Used by the AML
+ * All AML opcodes and the runtime arguments for each. Used by the AML
* interpreter Each list is compressed into a 32-bit number and stored
* in the master opcode table (in psopcode.c).
*
****************************************************************************/
/*
- * Walk state - current state of a parse tree walk. Used for both a leisurely
+ * Walk state - current state of a parse tree walk. Used for both a leisurely
* stroll through the tree (for whatever reason), and for control method
* execution.
*/
/*
* Get the return value and save as the last result
- * value. This is the only place where walk_state->return_desc
+ * value. This is the only place where walk_state->return_desc
* is set to anything other than zero!
*/
walk_state->return_desc = walk_state->operands[0];
*
* RETURN: Status
*
- * DESCRIPTION: Process all named fields in a field declaration. Names are
+ * DESCRIPTION: Process all named fields in a field declaration. Names are
* entered into the namespace.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Prepare a method for execution. Parses the method if necessary,
+ * DESCRIPTION: Prepare a method for execution. Parses the method if necessary,
* increments the thread count, and waits at the method semaphore
* for clearance to execute.
*
* RETURN: Status
*
* DESCRIPTION: Restart a method that was preempted by another (nested) method
- * invocation. Handle the return value (if any) from the callee.
+ * invocation. Handle the return value (if any) from the callee.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Terminate a control method. Delete everything that the method
+ * DESCRIPTION: Terminate a control method. Delete everything that the method
* created, delete all locals and arguments, and delete the parse
* tree if requested.
*
* RETURN: Status
*
* DESCRIPTION: Initialize the data structures that hold the method's arguments
- * and locals. The data struct is an array of namespace nodes for
+ * and locals. The data struct is an array of namespace nodes for
* each - this allows ref_of and de_ref_of to work properly for these
* special data types.
*
*
* RETURN: None
*
- * DESCRIPTION: Delete method locals and arguments. Arguments are only
+ * DESCRIPTION: Delete method locals and arguments. Arguments are only
* deleted if this method was called from another method.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Initialize arguments for a method. The parameter list is a list
+ * DESCRIPTION: Initialize arguments for a method. The parameter list is a list
* of ACPI operand objects, either null terminated or whose length
* is defined by max_param_count.
*
* This means that either 1) The expected argument was
* not passed to the method, or 2) A local variable
* was referenced by the method (via the ASL)
- * before it was initialized. Either case is an error.
+ * before it was initialized. Either case is an error.
*/
/* If slack enabled, init the local_x/arg_x to an Integer of value zero */
*
* RETURN: None
*
- * DESCRIPTION: Delete the entry at Opcode:Index. Inserts
+ * DESCRIPTION: Delete the entry at Opcode:Index. Inserts
* a null into the stack slot after the object is deleted.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed
+ * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed
* as the new value for the Arg or Local and the reference count
* for obj_desc is incremented.
*
/*
* If the reference count on the object is more than one, we must
- * take a copy of the object before we store. A reference count
+ * take a copy of the object before we store. A reference count
* of exactly 1 means that the object was just created during the
* evaluation of an expression, and we can safely use it since it
* is not used anywhere else.
/*
* Second arg is the buffer data (optional) byte_list can be either
- * individual bytes or a string initializer. In either case, a
+ * individual bytes or a string initializer. In either case, a
* byte_list appears in the AML.
*/
arg = op->common.value.arg; /* skip first arg */
/*
* Because of the execution pass through the non-control-method
- * parts of the table, we can arrive here twice. Only init
+ * parts of the table, we can arrive here twice. Only init
* the named object node the first time through
*/
if (acpi_ns_get_attached_object(node)) {
* RETURN: Status
*
* DESCRIPTION: Initialize a namespace object from a parser Op and its
- * associated arguments. The namespace object is a more compact
+ * associated arguments. The namespace object is a more compact
* representation of the Op and its arguments.
*
******************************************************************************/
*
* RETURN: None.
*
- * DESCRIPTION: Clear and remove a reference on an implicit return value. Used
+ * DESCRIPTION: Clear and remove a reference on an implicit return value. Used
* to delete "stale" return values (if enabled, the return value
* from every operator is saved at least momentarily, in case the
* parent method exits.)
*
* DESCRIPTION: Implements the optional "implicit return". We save the result
* of every ASL operator and control method invocation in case the
- * parent method exit. Before storing a new return value, we
+ * parent method exit. Before storing a new return value, we
* delete the previous return value.
*
******************************************************************************/
*
* If there is no parent, or the parent is a scope_op, we are executing
* at the method level. An executing method typically has no parent,
- * since each method is parsed separately. A method invoked externally
+ * since each method is parsed separately. A method invoked externally
* via execute_control_method has a scope_op as the parent.
*/
if ((!op->common.parent) ||
}
/*
- * Decide what to do with the result based on the parent. If
+ * Decide what to do with the result based on the parent. If
* the parent opcode will not use the result, delete the object.
* Otherwise leave it as is, it will be deleted when it is used
* as an operand later.
/*
* These opcodes allow term_arg(s) as operands and therefore
- * the operands can be method calls. The result is used.
+ * the operands can be method calls. The result is used.
*/
goto result_used;
AML_BANK_FIELD_OP)) {
/*
* These opcodes allow term_arg(s) as operands and therefore
- * the operands can be method calls. The result is used.
+ * the operands can be method calls. The result is used.
*/
goto result_used;
}
*
* RETURN: Status
*
- * DESCRIPTION: Used after interpretation of an opcode. If there is an internal
+ * DESCRIPTION: Used after interpretation of an opcode. If there is an internal
* result descriptor, check if the parent opcode will actually use
- * this result. If not, delete the result now so that it will
+ * this result. If not, delete the result now so that it will
* not become orphaned.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Resolve all operands to their values. Used to prepare
+ * DESCRIPTION: Resolve all operands to their values. Used to prepare
* arguments to a control method invocation (a call from one
* method to another.)
*
/*
* Attempt to resolve each of the valid operands
- * Method arguments are passed by reference, not by value. This means
+ * Method arguments are passed by reference, not by value. This means
* that the actual objects are passed, not copies of the objects.
*/
for (i = 0; i < walk_state->num_operands; i++) {
* RETURN: Status
*
* DESCRIPTION: Translate a parse tree object that is an argument to an AML
- * opcode to the equivalent interpreter object. This may include
+ * opcode to the equivalent interpreter object. This may include
* looking up a name or entering a new name into the internal
* namespace.
*
/*
* Special handling for buffer_field declarations. This is a deferred
* opcode that unfortunately defines the field name as the last
- * parameter instead of the first. We get here when we are performing
+ * parameter instead of the first. We get here when we are performing
* the deferred execution, so the actual name of the field is already
- * in the namespace. We don't want to attempt to look it up again
+ * in the namespace. We don't want to attempt to look it up again
* because we may be executing in a different scope than where the
* actual opcode exists.
*/
/*
* If the name is null, this means that this is an
* optional result parameter that was not specified
- * in the original ASL. Create a Zero Constant for a
- * placeholder. (Store to a constant is a Noop.)
+ * in the original ASL. Create a Zero Constant for a
+ * placeholder. (Store to a constant is a Noop.)
*/
opcode = AML_ZERO_OP; /* Has no arguments! */
* RETURN: Status
*
* DESCRIPTION: Descending callback used during the execution of control
- * methods. This is where most operators and operands are
+ * methods. This is where most operators and operands are
* dispatched to the interpreter.
*
****************************************************************************/
if (walk_state->walk_type & ACPI_WALK_METHOD) {
/*
* Found a named object declaration during method execution;
- * we must enter this object into the namespace. The created
+ * we must enter this object into the namespace. The created
* object is temporary and will be deleted upon completion of
* the execution of this method.
*
* RETURN: Status
*
* DESCRIPTION: Ascending callback used during the execution of control
- * methods. The only thing we really need to do here is to
+ * methods. The only thing we really need to do here is to
* notice the beginning of IF, ELSE, and WHILE blocks.
*
****************************************************************************/
if (ACPI_SUCCESS(status)) {
/*
* Dispatch the request to the appropriate interpreter handler
- * routine. There is one routine per opcode "type" based upon the
+ * routine. There is one routine per opcode "type" based upon the
* number of opcode arguments and return type.
*/
status =
*
* RETURN: Status
*
- * DESCRIPTION: Pop this walk's object stack. Objects on the stack are NOT
+ * DESCRIPTION: Pop this walk's object stack. Objects on the stack are NOT
* deleted by this routine.
*
******************************************************************************/
* RETURN: A walk_state object popped from the thread's stack
*
* DESCRIPTION: Remove and return the walkstate object that is at the head of
- * the walk stack for the given walk list. NULL indicates that
+ * the walk stack for the given walk list. NULL indicates that
* the list is empty.
*
******************************************************************************/
*
* RETURN: Pointer to the new walk state.
*
- * DESCRIPTION: Allocate and initialize a new walk state. The current walk
+ * DESCRIPTION: Allocate and initialize a new walk state. The current walk
* state is set to this new state.
*
******************************************************************************/
/*
* Setup the current scope.
* Find a Named Op that has a namespace node associated with it.
- * search upwards from this Op. Current scope is the first
+ * search upwards from this Op. Current scope is the first
* Op with a namespace node.
*/
extra_op = parser_state->start_op;
(target_node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
/*
* Dereference an existing alias so that we don't create a chain
- * of aliases. With this code, we guarantee that an alias is
+ * of aliases. With this code, we guarantee that an alias is
* always exactly one level of indirection away from the
* actual aliased name.
*/
/*
* For objects that can never change (i.e., the NS node will
* permanently point to the same object), we can simply attach
- * the object to the new NS node. For other objects (such as
+ * the object to the new NS node. For other objects (such as
* Integers, buffers, etc.), we have to point the Alias node
* to the original Node.
*/
/*
* The new alias assumes the type of the target, and it points
- * to the same object. The reference count of the object has an
+ * to the same object. The reference count of the object has an
* additional reference to prevent deletion out from under either the
* target node or the alias Node
*/
* PARAMETERS: title - Descriptive text
* value - Value to be displayed
*
- * DESCRIPTION: Object dump output formatting functions. These functions
+ * DESCRIPTION: Object dump output formatting functions. These functions
* reduce the number of format strings required and keeps them
* all in one place for easy modification.
*
*
* RETURN: Status
*
- * DESCRIPTION: Read from a named field. Returns either an Integer or a
+ * DESCRIPTION: Read from a named field. Returns either an Integer or a
* Buffer, depending on the size of the field.
*
******************************************************************************/
* Allocate a buffer for the contents of the field.
*
* If the field is larger than the current integer width, create
- * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
+ * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
* the use of arithmetic operators on the returned value if the
* field size is equal or smaller than an Integer.
*
#endif
/*
- * Validate the request. The entire request from the byte offset for a
+ * Validate the request. The entire request from the byte offset for a
* length of one field datum (access width) must fit within the region.
* (Region length is specified in bytes)
*/
obj_desc->common_field.access_byte_width) {
/*
* This is the case where the access_type (acc_word, etc.) is wider
- * than the region itself. For example, a region of length one
+ * than the region itself. For example, a region of length one
* byte, and a field with Dword access specified.
*/
ACPI_ERROR((AE_INFO,
*
* DESCRIPTION: Check if a value is out of range of the field being written.
* Used to check if the values written to Index and Bank registers
- * are out of range. Normally, the value is simply truncated
+ * are out of range. Normally, the value is simply truncated
* to fit the field, but this case is most likely a serious
* coding error in the ASL.
*
*
* RETURN: Status
*
- * DESCRIPTION: Read or Write a single datum of a field. The field_type is
+ * DESCRIPTION: Read or Write a single datum of a field. The field_type is
* demultiplexed here to handle the different types of fields
* (buffer_field, region_field, index_field, bank_field)
*
ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length);
/*
* We must have a buffer that is at least as long as the field
- * we are writing to. This is because individual fields are
+ * we are writing to. This is because individual fields are
* indivisible and partial writes are not supported -- as per
* the ACPI specification.
*/
/*
* Copy the original data to the new buffer, starting
- * at Byte zero. All unused (upper) bytes of the
+ * at Byte zero. All unused (upper) bytes of the
* buffer will be 0.
*/
ACPI_MEMCPY((char *)new_buffer, (char *)buffer, buffer_length);
ACPI_FUNCTION_TRACE(ex_do_concatenate);
/*
- * Convert the second operand if necessary. The first operand
+ * Convert the second operand if necessary. The first operand
* determines the type of the second operand, (See the Data Types
* section of the ACPI specification.) Both object types are
* guaranteed to be either Integer/String/Buffer by the operand
ACPI_FUNCTION_TRACE(ex_do_logical_op);
/*
- * Convert the second operand if necessary. The first operand
+ * Convert the second operand if necessary. The first operand
* determines the type of the second operand, (See the Data Types
* section of the ACPI 3.0+ specification.) Both object types are
* guaranteed to be either Integer/String/Buffer by the operand
* (-1)==root, 0==none
* num_name_segs - count of 4-character name segments
*
- * RETURN: A pointer to the allocated string segment. This segment must
+ * RETURN: A pointer to the allocated string segment. This segment must
* be deleted by the caller.
*
* DESCRIPTION: Allocate a buffer for a name string. Ensure allocated name
}
/*
- * Set result to ONES (TRUE) if Value == 0. Note:
+ * Set result to ONES (TRUE) if Value == 0. Note:
* return_desc->Integer.Value is initially == 0 (FALSE) from above.
*/
if (!operand[0]->integer.value) {
case AML_INCREMENT_OP: /* Increment (Operand) */
/*
- * Create a new integer. Can't just get the base integer and
+ * Create a new integer. Can't just get the base integer and
* increment it because it may be an Arg or Field.
*/
return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
/*
* Note: The operand is not resolved at this point because we want to
- * get the associated object, not its value. For example, we don't
+ * get the associated object, not its value. For example, we don't
* want to resolve a field_unit to its value, we want the actual
* field_unit object.
*/
/*
* The type of the base object must be integer, buffer, string, or
- * package. All others are not supported.
+ * package. All others are not supported.
*
* NOTE: Integer is not specifically supported by the ACPI spec,
* but is supported implicitly via implicit operand conversion.
case ACPI_TYPE_PACKAGE:
/*
- * Return the referenced element of the package. We must
+ * Return the referenced element of the package. We must
* add another reference to the referenced object, however.
*/
return_desc =
/*
* Dispatch the notify to the appropriate handler
* NOTE: the request is queued for execution after this method
- * completes. The notify handlers are NOT invoked synchronously
+ * completes. The notify handlers are NOT invoked synchronously
* from this thread -- because handlers may in turn run other
* control methods.
*/
case AML_MID_OP: /* Mid (Source[0], Index[1], Length[2], Result[3]) */
/*
- * Create the return object. The Source operand is guaranteed to be
+ * Create the return object. The Source operand is guaranteed to be
* either a String or a Buffer, so just use its type.
*/
return_desc = acpi_ut_create_internal_object((operand[0])->
* and the next should be examined.
*
* Upon finding a match, the loop will terminate via "break" at
- * the bottom. If it terminates "normally", match_value will be
+ * the bottom. If it terminates "normally", match_value will be
* ACPI_UINT64_MAX (Ones) (its initial value) indicating that no
* match was found.
*/
* any_acc keyword.
*
* NOTE: Need to have the region_length in order to check for boundary
- * conditions (end-of-region). However, the region_length is a deferred
- * operation. Therefore, to complete this implementation, the generation
+ * conditions (end-of-region). However, the region_length is a deferred
+ * operation. Therefore, to complete this implementation, the generation
* of this access width must be deferred until the region length has
* been evaluated.
*
* RETURN: Status
*
* DESCRIPTION: Initialize the areas of the field object that are common
- * to the various types of fields. Note: This is very "sensitive"
+ * to the various types of fields. Note: This is very "sensitive"
* code because we are solving the general case for field
* alignment.
*
obj_desc->common_field.bit_length = field_bit_length;
/*
- * Decode the access type so we can compute offsets. The access type gives
+ * Decode the access type so we can compute offsets. The access type gives
* two pieces of information - the width of each field access and the
* necessary byte_alignment (address granularity) of the access.
*
* For any_acc, the access_bit_width is the largest width that is both
* necessary and possible in an attempt to access the whole field in one
- * I/O operation. However, for any_acc, the byte_alignment is always one
+ * I/O operation. However, for any_acc, the byte_alignment is always one
* byte.
*
* For all Buffer Fields, the byte_alignment is always one byte.
/*
* base_byte_offset is the address of the start of the field within the
- * region. It is the byte address of the first *datum* (field-width data
+ * region. It is the byte address of the first *datum* (field-width data
* unit) of the field. (i.e., the first datum that contains at least the
* first *bit* of the field.)
*
* Perform the memory read or write
*
* Note: For machines that do not support non-aligned transfers, the target
- * address was checked for alignment above. We do not attempt to break the
+ * address was checked for alignment above. We do not attempt to break the
* transfer up into smaller (byte-size) chunks because the AML specifically
* asked for a transfer width that the hardware may require.
*/
* PARAMETERS: object_ptr - Pointer to a location that contains
* a pointer to a NS node, and will receive a
* pointer to the resolved object.
- * walk_state - Current state. Valid only if executing AML
- * code. NULL if simply resolving an object
+ * walk_state - Current state. Valid only if executing AML
+ * code. NULL if simply resolving an object
*
* RETURN: Status
*
*
* Note: for some of the data types, the pointer attached to the Node
* can be either a pointer to an actual internal object or a pointer into the
- * AML stream itself. These types are currently:
+ * AML stream itself. These types are currently:
*
* ACPI_TYPE_INTEGER
* ACPI_TYPE_STRING
ACPI_FUNCTION_TRACE(ex_resolve_node_to_value);
/*
- * The stack pointer points to a struct acpi_namespace_node (Node). Get the
+ * The stack pointer points to a struct acpi_namespace_node (Node). Get the
* object that is attached to the Node.
*/
node = *object_ptr;
*
* RETURN: Status
*
- * DESCRIPTION: Return the base object and type. Traverse a reference list if
+ * DESCRIPTION: Return the base object and type. Traverse a reference list if
* necessary to get to the base object.
*
******************************************************************************/
if (type_needed == ACPI_TYPE_LOCAL_REFERENCE) {
/*
* Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
- * objects and thus allow them to be targets. (As per the ACPI
+ * objects and thus allow them to be targets. (As per the ACPI
* specification, a store to a constant is a noop.)
*/
if ((this_type == ACPI_TYPE_INTEGER) &&
if (acpi_gbl_enable_interpreter_slack) {
/*
* Enable original behavior of Store(), allowing any and all
- * objects as the source operand. The ACPI spec does not
+ * objects as the source operand. The ACPI spec does not
* allow this, however.
*/
break;
* with the input value.
*
* When storing into an object the data is converted to the
- * target object type then stored in the object. This means
+ * target object type then stored in the object. This means
* that the target object type (for an initialized target) will
* not be changed by a store operation.
*
acpi_ut_get_object_type_name(source_desc),
source_desc, node));
- /* No conversions for all other types. Just attach the source object */
+ /* No conversions for all other types. Just attach the source object */
status = acpi_ns_attach_object(node, source_desc,
source_desc->common.type);
*
* RETURN: Status, resolved object in source_desc_ptr.
*
- * DESCRIPTION: Resolve an object. If the object is a reference, dereference
+ * DESCRIPTION: Resolve an object. If the object is a reference, dereference
* it and return the actual object in the source_desc_ptr.
*
******************************************************************************/
/*
* Stores into a Field/Region or into a Integer/Buffer/String
- * are all essentially the same. This case handles the
+ * are all essentially the same. This case handles the
* "interchangeable" types Integer, String, and Buffer.
*/
if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
*
* RETURN: Status
*
- * DESCRIPTION: "Store" an object to another object. This may include
+ * DESCRIPTION: "Store" an object to another object. This may include
* converting the source type to the target type (implicit
* conversion), and a copy of the value of the source to
* the target.
* with the input value.
*
* When storing into an object the data is converted to the
- * target object type then stored in the object. This means
+ * target object type then stored in the object. This means
* that the target object type (for an initialized target) will
* not be changed by a store operation.
*
* This module allows destination types of Number, String,
* Buffer, and Package.
*
- * Assumes parameters are already validated. NOTE: source_desc
+ * Assumes parameters are already validated. NOTE: source_desc
* resolution (from a reference object) must be performed by
* the caller if necessary.
*
#ifdef ACPI_OBSOLETE_BEHAVIOR
/*
* NOTE: ACPI versions up to 3.0 specified that the buffer must be
- * truncated if the string is smaller than the buffer. However, "other"
+ * truncated if the string is smaller than the buffer. However, "other"
* implementations of ACPI never did this and thus became the defacto
* standard. ACPI 3.0A changes this behavior such that the buffer
* is no longer truncated.
/*
* OBSOLETE BEHAVIOR:
* If the original source was a string, we must truncate the buffer,
- * according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
+ * according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
* copy must not truncate the original buffer.
*/
if (original_src_type == ACPI_TYPE_STRING) {
* RETURN: Status
*
* DESCRIPTION: Implements a semaphore wait with a check to see if the
- * semaphore is available immediately. If it is not, the
+ * semaphore is available immediately. If it is not, the
* interpreter is released before waiting.
*
******************************************************************************/
* RETURN: Status
*
* DESCRIPTION: Implements a mutex wait with a check to see if the
- * mutex is available immediately. If it is not, the
+ * mutex is available immediately. If it is not, the
* interpreter is released before waiting.
*
******************************************************************************/
* DESCRIPTION: Suspend running thread for specified amount of time.
* Note: ACPI specification requires that Stall() does not
* relinquish the processor, and delays longer than 100 usec
- * should use Sleep() instead. We allow stalls up to 255 usec
+ * should use Sleep() instead. We allow stalls up to 255 usec
* for compatibility with other interpreters and existing BIOSs.
*
******************************************************************************/
* RETURN: Status
*
* DESCRIPTION: Provides an access point to perform synchronization operations
- * within the AML. This operation is a request to wait for an
+ * within the AML. This operation is a request to wait for an
* event.
*
******************************************************************************/
/*
* DEFINE_AML_GLOBALS is tested in amlcode.h
* to determine whether certain global names should be "defined" or only
- * "declared" in the current compilation. This enhances maintainability
+ * "declared" in the current compilation. This enhances maintainability
* by enabling a single header file to embody all knowledge of the names
* in question.
*
* Exactly one module of any executable should #define DEFINE_GLOBALS
- * before #including the header files which use this convention. The
+ * before #including the header files which use this convention. The
* names in question will be defined and initialized in that module,
* and declared as extern in all other modules which #include those
* header files.
*
* RETURN: SYS_MODE_ACPI or SYS_MODE_LEGACY
*
- * DESCRIPTION: Return current operating state of system. Determined by
+ * DESCRIPTION: Return current operating state of system. Determined by
* querying the SCI_EN bit.
*
******************************************************************************/
* a versatile and accurate timer.
*
* Note that this function accommodates only a single timer
- * rollover. Thus for 24-bit timers, this function should only
+ * rollover. Thus for 24-bit timers, this function should only
* be used for calculating durations less than ~4.6 seconds
* (~20 minutes for 32-bit timers) -- calculations below:
*
*
* RETURN: None.
*
- * DESCRIPTION: Delete a subtree of the namespace. This includes all objects
+ * DESCRIPTION: Delete a subtree of the namespace. This includes all objects
* stored within the subtree.
*
******************************************************************************/
* RETURN: Status
*
* DESCRIPTION: Delete entries within the namespace that are owned by a
- * specific ID. Used to delete entire ACPI tables. All
+ * specific ID. Used to delete entire ACPI tables. All
* reference counts are updated.
*
* MUTEX: Locks namespace during deletion walk.
*
* PARAMETERS: search_base - Root of subtree to be dumped, or
* NS_ALL to dump the entire namespace
- * max_depth - Maximum depth of dump. Use INT_MAX
+ * max_depth - Maximum depth of dump. Use INT_MAX
* for an effectively unlimited depth.
*
* RETURN: None
/*
* Parse the table and load the namespace with all named
- * objects found within. Control methods are NOT parsed
- * at this time. In fact, the control methods cannot be
+ * objects found within. Control methods are NOT parsed
+ * at this time. In fact, the control methods cannot be
* parsed until the entire namespace is loaded, because
* if a control method makes a forward reference (call)
* to another control method, we can't continue parsing
}
/*
- * Now we can parse the control methods. We always parse
+ * Now we can parse the control methods. We always parse
* them here for a sanity check, and if configured for
* just-in-time parsing, we delete the control method
* parse trees.
}
/*
- * Load the namespace. The DSDT is required,
+ * Load the namespace. The DSDT is required,
* but the SSDT and PSDT tables are optional.
*/
status = acpi_ns_load_table_by_type(ACPI_TABLE_ID_DSDT);
* RETURN: Status
*
* DESCRIPTION: Shrinks the namespace, typically in response to an undocking
- * event. Deletes an entire subtree starting from (and
+ * event. Deletes an entire subtree starting from (and
* including) the given handle.
*
******************************************************************************/
* RETURN: Status
*
* DESCRIPTION: Record the given object as the value associated with the
- * name whose acpi_handle is passed. If Object is NULL
+ * name whose acpi_handle is passed. If Object is NULL
* and Type is ACPI_TYPE_ANY, set the name as having no value.
* Note: Future may require that the Node->Flags field be passed
* as a parameter.
((struct acpi_namespace_node *)object)->object) {
/*
* Value passed is a name handle and that name has a
- * non-null value. Use that name's value and type.
+ * non-null value. Use that name's value and type.
*/
obj_desc = ((struct acpi_namespace_node *)object)->object;
object_type = ((struct acpi_namespace_node *)object)->type;
*
* RETURN: Status
*
- * DESCRIPTION: Low-level attach data. Create and attach a Data object.
+ * DESCRIPTION: Low-level attach data. Create and attach a Data object.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
+ * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
* is responsible for the actual data.
*
******************************************************************************/
/*
* AML Parse, pass 1
*
- * In this pass, we load most of the namespace. Control methods
- * are not parsed until later. A parse tree is not created. Instead,
- * each Parser Op subtree is deleted when it is finished. This saves
+ * In this pass, we load most of the namespace. Control methods
+ * are not parsed until later. A parse tree is not created. Instead,
+ * each Parser Op subtree is deleted when it is finished. This saves
* a great deal of memory, and allows a small cache of parse objects
- * to service the entire parse. The second pass of the parse then
+ * to service the entire parse. The second pass of the parse then
* performs another complete parse of the AML.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 1\n"));
((num_segments > 0) ? (num_segments - 1) : 0) + 1;
/*
- * Check to see if we're still in bounds. If not, there's a problem
+ * Check to see if we're still in bounds. If not, there's a problem
* with internal_name (invalid format).
*/
if (required_length > internal_name_length) {
* \ (backslash) and ^ (carat) prefixes, and the
* . (period) to separate segments are supported.
* prefix_node - Root of subtree to be searched, or NS_ALL for the
- * root of the name space. If Name is fully
+ * root of the name space. If Name is fully
* qualified (first s8 is '\'), the passed value
* of Scope will not be accessed.
* flags - Used to indicate whether to perform upsearch or
* return_node - Where the Node is returned
*
* DESCRIPTION: Look up a name relative to a given scope and return the
- * corresponding Node. NOTE: Scope can be null.
+ * corresponding Node. NOTE: Scope can be null.
*
* MUTEX: Locks namespace
*
* RETURN: struct acpi_namespace_node - Pointer to the NEXT child or NULL if
* none is found.
*
- * DESCRIPTION: Return the next peer node within the namespace. If Handle
- * is valid, Scope is ignored. Otherwise, the first node
+ * DESCRIPTION: Return the next peer node within the namespace. If Handle
+ * is valid, Scope is ignored. Otherwise, the first node
* within Scope is returned.
*
******************************************************************************/
* RETURN: struct acpi_namespace_node - Pointer to the NEXT child or NULL if
* none is found.
*
- * DESCRIPTION: Return the next peer node within the namespace. If Handle
- * is valid, Scope is ignored. Otherwise, the first node
+ * DESCRIPTION: Return the next peer node within the namespace. If Handle
+ * is valid, Scope is ignored. Otherwise, the first node
* within Scope is returned.
*
******************************************************************************/
/*
* Depth first search: Attempt to go down another level in the
- * namespace if we are allowed to. Don't go any further if we have
+ * namespace if we are allowed to. Don't go any further if we have
* reached the caller specified maximum depth or if the user
* function has specified that the maximum depth has been reached.
*/
* PARAMETERS: handle - Object handle (optional)
* pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
- * terminated by NULL. May be NULL
+ * terminated by NULL. May be NULL
* if no parameters are being passed.
* return_buffer - Where to put method's return value (if
- * any). If NULL, no value is returned.
+ * any). If NULL, no value is returned.
* return_type - Expected type of return object
*
* RETURN: Status
*
* DESCRIPTION: Find and evaluate the given object, passing the given
- * parameters if necessary. One of "Handle" or "Pathname" must
+ * parameters if necessary. One of "Handle" or "Pathname" must
* be valid (non-null)
*
******************************************************************************/
* PARAMETERS: handle - Object handle (optional)
* pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
- * terminated by NULL. May be NULL
+ * terminated by NULL. May be NULL
* if no parameters are being passed.
* return_buffer - Where to put method's return value (if
- * any). If NULL, no value is returned.
+ * any). If NULL, no value is returned.
*
* RETURN: Status
*
* DESCRIPTION: Find and evaluate the given object, passing the given
- * parameters if necessary. One of "Handle" or "Pathname" must
+ * parameters if necessary. One of "Handle" or "Pathname" must
* be valid (non-null)
*
******************************************************************************/
* DESCRIPTION: Performs a modified depth-first walk of the namespace tree,
* starting (and ending) at the object specified by start_handle.
* The user_function is called whenever an object of type
- * Device is found. If the user function returns
+ * Device is found. If the user function returns
* a non-zero value, the search is terminated immediately and this
* value is returned to the caller.
*
* RETURN: Status
*
* DESCRIPTION: This routine will search for a caller specified name in the
- * name space. The caller can restrict the search region by
- * specifying a non NULL parent. The parent value is itself a
+ * name space. The caller can restrict the search region by
+ * specifying a non NULL parent. The parent value is itself a
* namespace handle.
*
******************************************************************************/
* RETURN: Pointer to a string containing the fully qualified Name.
*
* DESCRIPTION: This routine returns the fully qualified name associated with
- * the Handle parameter. This and the acpi_pathname_to_handle are
+ * the Handle parameter. This and the acpi_pathname_to_handle are
* complementary functions.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Return the next peer object within the namespace. If Handle is
- * valid, Scope is ignored. Otherwise, the first object within
+ * DESCRIPTION: Return the next peer object within the namespace. If Handle is
+ * valid, Scope is ignored. Otherwise, the first object within
* Scope is returned.
*
******************************************************************************/
* RETURN: Pointer to end-of-package +1
*
* DESCRIPTION: Get next package length and return a pointer past the end of
- * the package. Consumes the package length field
+ * the package. Consumes the package length field
*
******************************************************************************/
* RETURN: Pointer to the start of the name string (pointer points into
* the AML.
*
- * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name
- * prefix characters. Set parser state to point past the string.
+ * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name
+ * prefix characters. Set parser state to point past the string.
* (Name is consumed from the AML.)
*
******************************************************************************/
*
* DESCRIPTION: Get next name (if method call, return # of required args).
* Names are looked up in the internal namespace to determine
- * if the name represents a control method. If a method
+ * if the name represents a control method. If a method
* is found, the number of arguments to the method is returned.
* This information is critical for parsing to continue correctly.
*
*
* DESCRIPTION: Opcode table. Each entry contains <opcode, type, name, operands>
* The name is a simple ascii string, the operand specifier is an
- * ascii string with one letter per operand. The letter specifies
+ * ascii string with one letter per operand. The letter specifies
* the operand type.
*
******************************************************************************/
******************************************************************************/
/*
- * Master Opcode information table. A summary of everything we know about each
+ * Master Opcode information table. A summary of everything we know about each
* opcode, all in one place.
*/
const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = {
/*
* This table is indexed by the second opcode of the extended opcode
- * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
+ * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
*/
static const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = {
/* 0 1 2 3 4 5 6 7 */
/*
* Parse the AML and build an operation tree as most interpreters,
- * like Perl, do. Parsing is done by hand rather than with a YACC
+ * like Perl, do. Parsing is done by hand rather than with a YACC
* generated parser to tightly constrain stack and dynamic memory
- * usage. At the same time, parsing is kept flexible and the code
+ * usage. At the same time, parsing is kept flexible and the code
* fairly compact by parsing based on a list of AML opcode
* templates in aml_op_info[]
*/
case AE_CTRL_FALSE:
/*
* Either an IF/WHILE Predicate was false or we encountered a BREAK
- * opcode. In both cases, we do not execute the rest of the
+ * opcode. In both cases, we do not execute the rest of the
* package; We simply close out the parent (finishing the walk of
* this branch of the tree) and continue execution at the parent
* level.
acpi_gbl_current_walk_list = thread;
/*
- * Execute the walk loop as long as there is a valid Walk State. This
+ * Execute the walk loop as long as there is a valid Walk State. This
* handles nested control method invocations without recursion.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state));
* RETURN: Pointer to the new Op, null on failure
*
* DESCRIPTION: Allocate an acpi_op, choose op type (and thus size) based on
- * opcode. A cache of opcodes is available for the pure
+ * opcode. A cache of opcodes is available for the pure
* GENERIC_OP, since this is by far the most commonly used.
*
******************************************************************************/
*
* RETURN: None.
*
- * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list
+ * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list
* or actually free it.
*
******************************************************************************/
/*
* Calculate the size of the return buffer.
* The base size is the number of elements * the sizes of the
- * structures. Additional space for the strings is added below.
+ * structures. Additional space for the strings is added below.
* The minus one is to subtract the size of the u8 Source[1]
* member because it is added below.
*
* RETURN: Status, RSDP physical address
*
* DESCRIPTION: Search lower 1Mbyte of memory for the root system descriptor
- * pointer structure. If it is found, set *RSDP to point to it.
+ * pointer structure. If it is found, set *RSDP to point to it.
*
* NOTE1: The RSDP must be either in the first 1K of the Extended
* BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.)
*
* RETURN: None
*
- * DESCRIPTION: Release an object to the specified cache. If cache is full,
+ * DESCRIPTION: Release an object to the specified cache. If cache is full,
* the object is deleted.
*
******************************************************************************/
*
* PARAMETERS: cache - Handle to cache object
*
- * RETURN: the acquired object. NULL on error
+ * RETURN: the acquired object. NULL on error
*
- * DESCRIPTION: Get an object from the specified cache. If cache is empty,
+ * DESCRIPTION: Get an object from the specified cache. If cache is empty,
* the object is allocated.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Print message with no headers. Has same interface as
+ * DESCRIPTION: Print message with no headers. Has same interface as
* debug_print so that the same macros can be used.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit status also.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit value also.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit value also.
*
******************************************************************************/
* RETURN: Status (Checks for divide-by-zero)
*
* DESCRIPTION: Perform a short (maximum 64 bits divided by 32 bits)
- * divide and modulo. The result is a 64-bit quotient and a
+ * divide and modulo. The result is a 64-bit quotient and a
* 32-bit remainder.
*
******************************************************************************/
* control method or unloading a table. Either way, we would
* ignore any error anyway.
*
- * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
+ * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
*
******************************************************************************/
* RETURN: None
*
* DESCRIPTION: Set the global integer bit width based upon the revision
- * of the DSDT. For Revision 1 and 0, Integers are 32 bits.
- * For Revision 2 and above, Integers are 64 bits. Yes, this
+ * of the DSDT. For Revision 1 and 0, Integers are 32 bits.
+ * For Revision 2 and above, Integers are 64 bits. Yes, this
* makes a difference.
*
******************************************************************************/
*
* RETURN: TRUE if the name is valid, FALSE otherwise
*
- * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
+ * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
* 1) Upper case alpha
* 2) numeric
* 3) underscore
/*
* Check for:
- * 1) An uninitialized package element. It is completely
+ * 1) An uninitialized package element. It is completely
* legal to declare a package and leave it uninitialized
* 2) Not an internal object - can be a namespace node instead
- * 3) Any type other than a package. Packages are handled in else
+ * 3) Any type other than a package. Packages are handled in else
* case below.
*/
if ((!this_source_obj) ||
state->pkg.source_object->package.count) {
/*
* We've handled all of the objects at this level, This means
- * that we have just completed a package. That package may
+ * that we have just completed a package. That package may
* have contained one or more packages itself.
*
* Delete this state and pop the previous state (package).
/*
* Mutex debug code, for internal debugging only.
*
- * Deadlock prevention. Check if this thread owns any mutexes of value
- * greater than or equal to this one. If so, the thread has violated
- * the mutex ordering rule. This indicates a coding error somewhere in
+ * Deadlock prevention. Check if this thread owns any mutexes of value
+ * greater than or equal to this one. If so, the thread has violated
+ * the mutex ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
/*
* Mutex debug code, for internal debugging only.
*
- * Deadlock prevention. Check if this thread owns any mutexes of value
- * greater than this one. If so, the thread has violated the mutex
- * ordering rule. This indicates a coding error somewhere in
+ * Deadlock prevention. Check if this thread owns any mutexes of value
+ * greater than this one. If so, the thread has violated the mutex
+ * ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
*
* NOTE: We always allocate the worst-case object descriptor because
* these objects are cached, and we want them to be
- * one-size-satisifies-any-request. This in itself may not be
+ * one-size-satisifies-any-request. This in itself may not be
* the most memory efficient, but the efficiency of the object
* cache should more than make up for this!
*
* line_number - Caller's line number (for error output)
* component_id - Caller's component ID (for error output)
*
- * RETURN: Pointer to newly allocated object descriptor. Null on error
+ * RETURN: Pointer to newly allocated object descriptor. Null on error
*
- * DESCRIPTION: Allocate a new object descriptor. Gracefully handle
+ * DESCRIPTION: Allocate a new object descriptor. Gracefully handle
* error conditions.
*
******************************************************************************/
/*
* Account for the space required by the object rounded up to the next
- * multiple of the machine word size. This keeps each object aligned
+ * multiple of the machine word size. This keeps each object aligned
* on a machine word boundary. (preventing alignment faults on some
* machines.)
*/
*
* RETURN: The new state object. NULL on failure.
*
- * DESCRIPTION: Create a generic state object. Attempt to obtain one from
+ * DESCRIPTION: Create a generic state object. Attempt to obtain one from
* the global state cache; If none available, create a new one.
*
******************************************************************************/
* These procedures are used for tracking memory leaks in the subsystem, and
* they get compiled out when the ACPI_DBG_TRACK_ALLOCATIONS is not set.
*
- * Each memory allocation is tracked via a doubly linked list. Each
+ * Each memory allocation is tracked via a doubly linked list. Each
* element contains the caller's component, module name, function name, and
- * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call
+ * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call
* acpi_ut_track_allocation to add an element to the list; deletion
* occurs in the body of acpi_ut_free.
*/
* FUNCTION: acpi_ut_dump_allocations
*
* PARAMETERS: component - Component(s) to dump info for.
- * module - Module to dump info for. NULL means all.
+ * module - Module to dump info for. NULL means all.
*
* RETURN: None
*
* RETURN: status - the status of the call
*
* DESCRIPTION: This function is called to get information about the current
- * state of the ACPI subsystem. It will return system information
+ * state of the ACPI subsystem. It will return system information
* in the out_buffer.
*
* If the function fails an appropriate status will be returned
#define AE_CODE_TBL_MAX 0x0005
/*
- * AML exceptions. These are caused by problems with
+ * AML exceptions. These are caused by problems with
* the actual AML byte stream
*/
#define AE_AML_BAD_OPCODE (acpi_status) (0x0001 | AE_CODE_AML)
projects / platform / kernel / linux-3.10.git / commitdiff