doc/mgmt-api: Add advertising phys support to flags

Change-Id: Ie0941101f8d0cfbd7c0ac0f306c06ef95f663176
Signed-off-by: himanshu <h.himanshu@samsung.com>

diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
index 5d0dc89..01725a1 100755 (executable)
--- a/doc/mgmt-api.txt
+++ b/doc/mgmt-api.txt
@@ -2566,6 +2566,9 @@ Read Advertising Features Command
                4       Add TX Power field to Adv_Data
                5       Add Appearance field to Scan_Rsp
                6       Add Local Name in Scan_Rsp
+               7       Secondary Channel with LE 1M
+               8       Secondary Channel with LE 2M
+               9       Secondary Channel with LE Coded
 
        The Flags bit 0 indicates support for connectable advertising
        and for switching to connectable advertising independent of the
@@ -2615,6 +2618,15 @@ Read Advertising Features Command
        space is limited a short version or no name information. The
        Local Name will be added at the end of the scan response data.
 
+       The Flags bit 7 indicates support for advertising in secondary
+       channel in LE 1M PHY.
+
+       The Flags bit 8 indicates support for advertising in secondary
+       channel in LE 2M PHY. Primary channel would be on 1M.
+
+       The Flags bit 9 indicates support for advertising in secondary
+       channel in LE CODED PHY.
+
        The valid range for Instance identifiers is 1-254. The value 0
        is reserved for internal use and the value 255 is reserved for
        future extensions. However the Max_Instances value for indicating
@@ -2675,6 +2687,9 @@ Add Advertising Command
                4       Add TX Power field to Adv_Data
                5       Add Appearance field to Scan_Rsp
                6       Add Local Name in Scan_Rsp
+               7       Secondary Channel with LE 1M
+               8       Secondary Channel with LE 2M
+               9       Secondary Channel with LE Coded
 
        When the connectable flag is set, then the controller will use
        undirected connectable advertising. The value of the connectable
@@ -2702,6 +2717,16 @@ Add Advertising Command
        supported to provide less air traffic for devices implementing
        broadcaster role.
 
+       Secondary channel flags can be used to advertise in secondary
+       channel with the corresponding PHYs. These flag bits are mutually
+       exclusive and setting multiple will result in Invalid Parameter
+       error. Choosing either LE 1M or LE 2M will result in using
+       extended advertising on the primary channel with LE 1M and the
+       respectively LE 1M or LE 2M on the secondary channel. Choosing
+       LE Coded will result in using extended advertising on the primary
+       and secondary channels with LE Coded. Choosing none of these flags
+       will result in legacy advertising.
+
        The Duration parameter configures the length of an Instance. The
        value is in seconds.