ARM: dts: am335x-regor: Remove underscore in node names.

Remove underscore in node names following conventions.

Signed-off-by: Steffen Hemer <s.hemer@phytec.de>
Message-Id: <20230214132302.39087-5-s.hemer@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
index 7b3966e..3894f14 100644 (file)
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -18,7 +18,7 @@
        };
 
        /* User IO */
-       user_leds: user_leds {
+       user_leds: user-leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
                pinctrl-0 = <&user_leds_pins>;
@@ -39,7 +39,7 @@
 
 /* User Leds */
 &am33xx_pinmux {
-       user_leds_pins: pinmux_user_leds {
+       user_leds_pins: pinmux-user-leds {
                pinctrl-single,pins = <
                        AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)    /* lcd_hsync.gpio2_22 */
                        AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)   /* mcasp0_fsx.gpio3_15 */
@@ -49,7 +49,7 @@
 
 /* CAN Busses */
 &am33xx_pinmux {
-       dcan1_pins: pinmux_dcan1 {
+       dcan1_pins: pinmux-dcan1 {
                pinctrl-single,pins = <
                        AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)     /* uart0_ctsn.d_can1_tx */
                        AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)      /* uart0_rtsn.d_can1_rx */
@@ -65,7 +65,7 @@
 
 /* Ethernet */
 &am33xx_pinmux {
-       ethernet1_pins: pinmux_ethernet1 {
+       ethernet1_pins: pinmux-ethernet1 {
                pinctrl-single,pins = <
                        AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)               /* gpmc_a0.mii2_txen */
                        AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)       /* gpmc_a1.mii2_rxdv */
@@ -108,7 +108,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&user_gpios_pins>;
 
-       user_gpios_pins: pinmux_user_gpios {
+       user_gpios_pins: pinmux-user-gpios {
                pinctrl-single,pins = <
                        /* DIGIN 1-4 */
                        AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)              /* gpmc_ad11.gpio0_27 */
@@ -126,7 +126,7 @@
 
 /* MMC */
 &am33xx_pinmux {
-       mmc1_pins: pinmux_mmc1 {
+       mmc1_pins: pinmux-mmc1 {
                pinctrl-single,pins = <
                        AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
                        AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -155,14 +155,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-       uart0_pins: pinmux_uart0 {
+       uart0_pins: pinmux-uart0 {
                pinctrl-single,pins = <
                        AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
                        AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
                >;
        };
 
-       uart2_pins: pinmux_uart2 {
+       uart2_pins: pinmux-uart2 {
                pinctrl-single,pins = <
                        AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)     /* mii1_tx_clk.uart2_rxd */
                        AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)  /* mii1_rx_clk.uart2_txd */
@@ -184,7 +184,7 @@
 
 /* RS485 - UART1 */
 &am33xx_pinmux {
-       uart1_rs485_pins: pinmux_uart1_rs485_pins {
+       uart1_rs485_pins: pinmux-uart1-rs485-pins {
                pinctrl-single,pins = <
                        AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
                        AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)