arm: dts: rockchip: Add initial DT for Pinebook Pro
authorPeter Robinson <pbrobinson@gmail.com>
Mon, 20 Apr 2020 19:27:35 +0000 (20:27 +0100)
committerKever Yang <kever.yang@rock-chips.com>
Sun, 31 May 2020 12:46:08 +0000 (20:46 +0800)
Sync initial support for Pinebook Pro device tree from Linux 5.7-rc1.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
arch/arm/dts/Makefile
arch/arm/dts/rk3399-pinebook-pro.dts [new file with mode: 0644]

index 12ec6c7..c6af87c 100644 (file)
@@ -129,6 +129,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
        rk3399-nanopi-m4-2gb.dtb \
        rk3399-nanopi-neo4.dtb \
        rk3399-orangepi.dtb \
+       rk3399-pinebook-pro.dtb \
        rk3399-puma-ddr1333.dtb \
        rk3399-puma-ddr1600.dtb \
        rk3399-puma-ddr1866.dtb \
diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts
new file mode 100644 (file)
index 0000000..294d21b
--- /dev/null
@@ -0,0 +1,1096 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+       model = "Pine64 Pinebook Pro";
+       compatible = "pine64,pinebook-pro", "rockchip,rk3399";
+
+       chosen {
+               stdout-path = "serial2:1500000n8";
+       };
+
+       backlight: edp-backlight {
+               compatible = "pwm-backlight";
+               power-supply = <&vcc_12v>;
+               pwms = <&pwm0 0 740740 0>;
+       };
+
+       edp_panel: edp-panel {
+               compatible = "boe,nv140fhmn49";
+               backlight = <&backlight>;
+               enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&panel_en_gpio>;
+               power-supply = <&vcc3v3_panel>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               panel_in_edp: endpoint@0 {
+                                       reg = <0>;
+                                       remote-endpoint = <&edp_out_panel>;
+                               };
+                       };
+               };
+       };
+
+       /*
+        * Use separate nodes for gpio-keys to allow for selective deactivation
+        * of wakeup sources via sysfs without disabling the whole key
+        */
+       gpio-key-lid {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&lidbtn_gpio>;
+
+               lid {
+                       debounce-interval = <20>;
+                       gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
+                       label = "Lid";
+                       linux,code = <SW_LID>;
+                       linux,input-type = <EV_SW>;
+                       wakeup-event-action = <EV_ACT_DEASSERTED>;
+                       wakeup-source;
+               };
+       };
+
+       gpio-key-power {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pwrbtn_gpio>;
+
+               power {
+                       debounce-interval = <20>;
+                       gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+                       label = "Power";
+                       linux,code = <KEY_POWER>;
+                       wakeup-source;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
+
+               green-led {
+                       color = <LED_COLOR_ID_GREEN>;
+                       default-state = "on";
+                       function = LED_FUNCTION_POWER;
+                       gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+                       label = "green:power";
+               };
+
+               red-led {
+                       color = <LED_COLOR_ID_RED>;
+                       default-state = "off";
+                       function = LED_FUNCTION_STANDBY;
+                       gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+                       label = "red:standby";
+                       panic-indicator;
+                       retain-state-suspended;
+               };
+       };
+
+       /* Power sequence for SDIO WiFi module */
+       sdio_pwrseq: sdio-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               clocks = <&rk808 1>;
+               clock-names = "ext_clock";
+               pinctrl-names = "default";
+               pinctrl-0 = <&wifi_enable_h_gpio>;
+               post-power-on-delay-ms = <100>;
+               power-off-delay-us = <500000>;
+
+               /* WL_REG_ON on module */
+               reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+       };
+
+       /* Audio components */
+       es8316-sound {
+               compatible = "simple-audio-card";
+               pinctrl-names = "default";
+               pinctrl-0 = <&hp_det_gpio>;
+               simple-audio-card,name = "rockchip,es8316-codec";
+               simple-audio-card,format = "i2s";
+               simple-audio-card,mclk-fs = <256>;
+
+               simple-audio-card,widgets =
+                       "Microphone", "Mic Jack",
+                       "Headphone", "Headphones",
+                       "Speaker", "Speaker";
+               simple-audio-card,routing =
+                       "MIC1", "Mic Jack",
+                       "Headphones", "HPOL",
+                       "Headphones", "HPOR",
+                       "Speaker Amplifier INL", "HPOL",
+                       "Speaker Amplifier INR", "HPOR",
+                       "Speaker", "Speaker Amplifier OUTL",
+                       "Speaker", "Speaker Amplifier OUTR";
+
+               simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+               simple-audio-card,aux-devs = <&speaker_amp>;
+               simple-audio-card,pin-switches = "Speaker";
+
+               simple-audio-card,cpu {
+                       sound-dai = <&i2s1>;
+               };
+
+               simple-audio-card,codec {
+                       sound-dai = <&es8316>;
+               };
+       };
+
+       speaker_amp: speaker-amplifier {
+               compatible = "simple-audio-amplifier";
+               enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+               sound-name-prefix = "Speaker Amplifier";
+               VCC-supply = <&pa_5v>;
+       };
+
+       /* Power tree */
+       /* Root power source */
+       vcc_sysin: vcc-sysin {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_sysin";
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
+       /* Regulators supplied by vcc_sysin */
+       /* LCD backlight supply */
+       vcc_12v: vcc-12v {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_12v";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <12000000>;
+               regulator-max-microvolt = <12000000>;
+               vin-supply = <&vcc_sysin>;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+
+       /* Main 3.3 V supply */
+       vcc3v3_sys: wifi_bat: vcc3v3-sys {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3_sys";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&vcc_sysin>;
+
+               regulator-state-mem {
+                       regulator-on-in-suspend;
+               };
+       };
+
+       /* 5 V USB power supply */
+       vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pwr_5v_gpio>;
+               regulator-name = "vcc5v0_usb";
+               regulator-always-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vcc_sysin>;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+
+       /* RK3399 logic supply */
+       vdd_log: vdd-log {
+               compatible = "pwm-regulator";
+               pwms = <&pwm2 0 25000 1>;
+               regulator-name = "vdd_log";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <800000>;
+               regulator-max-microvolt = <1400000>;
+               vin-supply = <&vcc_sysin>;
+
+               regulator-state-mem {
+                       regulator-on-in-suspend;
+               };
+       };
+
+       /* Regulators supplied by vcc3v3_sys */
+       /* 0.9 V supply, always on */
+       vcc_0v9: vcc-0v9 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_0v9";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <900000>;
+               regulator-max-microvolt = <900000>;
+               vin-supply = <&vcc3v3_sys>;
+       };
+
+       /* S3 1.8 V supply, switched by vcc1v8_s3 */
+       vcca1v8_s3: vcc1v8-s3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcca1v8_s3";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&vcc3v3_sys>;
+       };
+
+       /* micro SD card power */
+       vcc3v0_sd: vcc3v0-sd {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
+               regulator-name = "vcc3v0_sd";
+               regulator-always-on;
+               regulator-min-microvolt = <3000000>;
+               regulator-max-microvolt = <3000000>;
+               vin-supply = <&vcc3v3_sys>;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+
+       /* LCD panel power, called VCC3V3_S0 in schematic */
+       vcc3v3_panel: vcc3v3-panel {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&lcdvcc_en_gpio>;
+               regulator-name = "vcc3v3_panel";
+               regulator-always-on;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-enable-ramp-delay = <100000>;
+               vin-supply = <&vcc3v3_sys>;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+
+       /* M.2 adapter power, switched by vcc1v8_s3 */
+       vcc3v3_ssd: vcc3v3-ssd {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3_ssd";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&vcc3v3_sys>;
+       };
+
+       /* Regulators supplied by vcc5v0_usb */
+       /* USB 3 port power supply regulator  */
+       vcc5v0_otg: vcc5v0-otg {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vcc5v0_host_en_gpio>;
+               regulator-name = "vcc5v0_otg";
+               regulator-always-on;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vcc5v0_usb>;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+
+       /* Regulators supplied by vcc5v0_usb */
+       /* Type C port power supply regulator */
+       vbus_5vout: vbus_typec: vbus-5vout {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
+               regulator-name = "vbus_5vout";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vcc5v0_usb>;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+
+       /* Regulators supplied by vcc_1v8 */
+       /* Primary 0.9 V LDO */
+       vcca0v9_s3: vcca0v9-s3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc0v9_s3";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&vcc_1v8>;
+
+               regulator-state-mem {
+                       regulator-on-in-suspend;
+               };
+       };
+
+       mains_charger: dc-charger {
+               compatible = "gpio-charger";
+               charger-type = "mains";
+               gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
+
+               /* Also triggered by USB charger */
+               pinctrl-names = "default";
+               pinctrl-0 = <&dc_det_gpio>;
+       };
+};
+
+&cdn_dp {
+       status = "okay";
+};
+
+&cpu_b0 {
+       cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+       cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+       cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+       cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+       cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+       cpu-supply = <&vdd_cpu_l>;
+};
+
+&edp {
+       force-hpd;
+       pinctrl-names = "default";
+       pinctrl-0 = <&edp_hpd>;
+       status = "okay";
+
+       ports {
+               edp_out: port@1 {
+                       reg = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       edp_out_panel: endpoint@0 {
+                               reg = <0>;
+                               remote-endpoint = <&panel_in_edp>;
+                       };
+               };
+       };
+};
+
+&emmc_phy {
+       status = "okay";
+};
+
+&gpu {
+       mali-supply = <&vdd_gpu>;
+       status = "okay";
+};
+
+&hdmi_sound {
+       status = "okay";
+};
+
+&i2c0 {
+       clock-frequency = <400000>;
+       i2c-scl-falling-time-ns = <4>;
+       i2c-scl-rising-time-ns = <168>;
+       status = "okay";
+
+       rk808: pmic@1b {
+               compatible = "rockchip,rk808";
+               reg = <0x1b>;
+               #clock-cells = <1>;
+               clock-output-names = "xin32k", "rk808-clkout2";
+               interrupt-parent = <&gpio3>;
+               interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pmic_int_l_gpio>;
+               rockchip,system-power-controller;
+               wakeup-source;
+
+               vcc1-supply = <&vcc_sysin>;
+               vcc2-supply = <&vcc_sysin>;
+               vcc3-supply = <&vcc_sysin>;
+               vcc4-supply = <&vcc_sysin>;
+               vcc6-supply = <&vcc_sysin>;
+               vcc7-supply = <&vcc_sysin>;
+               vcc8-supply = <&vcc3v3_sys>;
+               vcc9-supply = <&vcc_sysin>;
+               vcc10-supply = <&vcc_sysin>;
+               vcc11-supply = <&vcc_sysin>;
+               vcc12-supply = <&vcc3v3_sys>;
+               vcc13-supply = <&vcc_sysin>;
+               vcc14-supply = <&vcc_sysin>;
+
+               regulators {
+                       /* rk3399 center logic supply */
+                       vdd_center: DCDC_REG1 {
+                               regulator-name = "vdd_center";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <750000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-ramp-delay = <6001>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vdd_cpu_l: DCDC_REG2 {
+                               regulator-name = "vdd_cpu_l";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <750000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-ramp-delay = <6001>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc_ddr: DCDC_REG3 {
+                               regulator-name = "vcc_ddr";
+                               regulator-always-on;
+                               regulator-boot-on;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                               };
+                       };
+
+                       vcc_1v8: vcc_wl: DCDC_REG4 {
+                               regulator-name = "vcc_1v8";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                                       regulator-suspend-microvolt = <1800000>;
+                               };
+                       };
+
+                       /* not used */
+                       LDO_REG1 {
+                       };
+
+                       /* not used */
+                       LDO_REG2 {
+                       };
+
+                       vcc1v8_pmupll: LDO_REG3 {
+                               regulator-name = "vcc1v8_pmupll";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                                       regulator-suspend-microvolt = <1800000>;
+                               };
+                       };
+
+                       vcc_sdio: LDO_REG4 {
+                               regulator-name = "vcc_sdio";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3000000>;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                                       regulator-suspend-microvolt = <3000000>;
+                               };
+                       };
+
+                       vcca3v0_codec: LDO_REG5 {
+                               regulator-name = "vcca3v0_codec";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc_1v5: LDO_REG6 {
+                               regulator-name = "vcc_1v5";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1500000>;
+                               regulator-max-microvolt = <1500000>;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                                       regulator-suspend-microvolt = <1500000>;
+                               };
+                       };
+
+                       vcca1v8_codec: LDO_REG7 {
+                               regulator-name = "vcca1v8_codec";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc_3v0: LDO_REG8 {
+                               regulator-name = "vcc_3v0";
+                               regulator-always-on;
+                               regulator-boot-on;
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+
+                               regulator-state-mem {
+                                       regulator-on-in-suspend;
+                                       regulator-suspend-microvolt = <3000000>;
+                               };
+                       };
+
+                       vcc3v3_s3: SWITCH_REG1 {
+                               regulator-name = "vcc3v3_s3";
+                               regulator-always-on;
+                               regulator-boot-on;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       vcc3v3_s0: SWITCH_REG2 {
+                               regulator-name = "vcc3v3_s0";
+                               regulator-always-on;
+                               regulator-boot-on;
+
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+               };
+       };
+
+       vdd_cpu_b: regulator@40 {
+               compatible = "silergy,syr827";
+               reg = <0x40>;
+               fcs,suspend-voltage-selector = <1>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vsel1_gpio>;
+               regulator-name = "vdd_cpu_b";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <712500>;
+               regulator-max-microvolt = <1500000>;
+               regulator-ramp-delay = <1000>;
+               vin-supply = <&vcc_1v8>;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+
+       vdd_gpu: regulator@41 {
+               compatible = "silergy,syr828";
+               reg = <0x41>;
+               fcs,suspend-voltage-selector = <1>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&vsel2_gpio>;
+               regulator-name = "vdd_gpu";
+               regulator-always-on;
+               regulator-boot-on;
+               regulator-min-microvolt = <712500>;
+               regulator-max-microvolt = <1500000>;
+               regulator-ramp-delay = <1000>;
+               vin-supply = <&vcc_1v8>;
+
+               regulator-state-mem {
+                       regulator-off-in-suspend;
+               };
+       };
+};
+
+&i2c1 {
+       clock-frequency = <100000>;
+       i2c-scl-falling-time-ns = <4>;
+       i2c-scl-rising-time-ns = <168>;
+       status = "okay";
+
+       es8316: es8316@11 {
+               compatible = "everest,es8316";
+               reg = <0x11>;
+               clocks = <&cru SCLK_I2S_8CH_OUT>;
+               clock-names = "mclk";
+               #sound-dai-cells = <0>;
+       };
+};
+
+&i2c3 {
+       i2c-scl-falling-time-ns = <15>;
+       i2c-scl-rising-time-ns = <450>;
+       status = "okay";
+};
+
+&i2c4 {
+       i2c-scl-falling-time-ns = <20>;
+       i2c-scl-rising-time-ns = <600>;
+       status = "okay";
+
+       fusb0: fusb30x@22 {
+               compatible = "fcs,fusb302";
+               reg = <0x22>;
+               fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&fusb0_int_gpio>;
+               vbus-supply = <&vbus_typec>;
+
+               connector {
+                       compatible = "usb-c-connector";
+                       data-role = "host";
+                       label = "USB-C";
+                       op-sink-microwatt = <1000000>;
+                       power-role = "dual";
+                       sink-pdos =
+                               <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+                       source-pdos =
+                               <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+                       try-power-role = "sink";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+
+                                       usbc_hs: endpoint {
+                                               remote-endpoint =
+                                                       <&u2phy0_typec_hs>;
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+
+                                       usbc_ss: endpoint {
+                                               remote-endpoint =
+                                                       <&tcphy0_typec_ss>;
+                                       };
+                               };
+
+                               port@2 {
+                                       reg = <2>;
+
+                                       usbc_dp: endpoint {
+                                               remote-endpoint =
+                                                       <&tcphy0_typec_dp>;
+                                       };
+                               };
+                       };
+               };
+       };
+};
+
+&i2s1 {
+       #sound-dai-cells = <0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
+       rockchip,capture-channels = <8>;
+       rockchip,playback-channels = <8>;
+       status = "okay";
+};
+
+&io_domains {
+       audio-supply = <&vcc_3v0>;
+       gpio1830-supply = <&vcc_3v0>;
+       sdmmc-supply = <&vcc_sdio>;
+       status = "okay";
+};
+
+&pcie_phy {
+       status = "okay";
+};
+
+&pcie0 {
+       bus-scan-delay-ms = <1000>;
+       ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+       max-link-speed = <2>;
+       num-lanes = <4>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie_clkreqn_cpm>;
+       vpcie0v9-supply = <&vcca0v9_s3>;
+       vpcie1v8-supply = <&vcca1v8_s3>;
+       vpcie3v3-supply = <&vcc3v3_ssd>;
+       status = "okay";
+};
+
+&pinctrl {
+       buttons {
+               pwrbtn_gpio: pwrbtn-gpio {
+                       rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+
+               lidbtn_gpio: lidbtn-gpio {
+                       rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       dc-charger {
+               dc_det_gpio: dc-det-gpio {
+                       rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       es8316 {
+               hp_det_gpio: hp-det-gpio {
+                       rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       fusb302x {
+               fusb0_int_gpio: fusb0-int-gpio {
+                       rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       i2s1 {
+               i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
+                       rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+               };
+       };
+
+       lcd-panel {
+               lcdvcc_en_gpio: lcdvcc-en-gpio {
+                       rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               panel_en_gpio: panel-en-gpio {
+                       rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               lcd_panel_reset_gpio: lcd-panel-reset-gpio {
+                       rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       leds {
+               pwrled_gpio: pwrled_gpio {
+                       rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               slpled_gpio: slpled_gpio {
+                       rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       pmic {
+               pmic_int_l_gpio: pmic-int-l-gpio {
+                       rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+
+               vsel1_gpio: vsel1-gpio {
+                       rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+               };
+
+               vsel2_gpio: vsel2-gpio {
+                       rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+               };
+       };
+
+       sdcard {
+               sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
+                       rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+       };
+
+       sdio-pwrseq {
+               wifi_enable_h_gpio: wifi-enable-h-gpio {
+                       rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       usb-typec {
+               vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
+                       rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
+
+       usb2 {
+               pwr_5v_gpio: pwr-5v-gpio {
+                       rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
+                       rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       wireless-bluetooth {
+               bt_wake_gpio: bt-wake-gpio {
+                       rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               bt_host_wake_gpio: bt-host-wake-gpio {
+                       rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+
+               bt_reset_gpio: bt-reset-gpio {
+                       rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&pmu_io_domains {
+       pmu1830-supply = <&vcc_3v0>;
+       status = "okay";
+};
+
+&pwm0 {
+       status = "okay";
+};
+
+&pwm2 {
+       status = "okay";
+};
+
+&saradc {
+       vref-supply = <&vcca1v8_s3>;
+       status = "okay";
+};
+
+&sdmmc {
+       bus-width = <4>;
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+       disable-wp;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+       sd-uhs-sdr104;
+       vmmc-supply = <&vcc3v0_sd>;
+       vqmmc-supply = <&vcc_sdio>;
+       status = "okay";
+};
+
+&sdio0 {
+       bus-width = <4>;
+       cap-sd-highspeed;
+       cap-sdio-irq;
+       keep-power-in-suspend;
+       mmc-pwrseq = <&sdio_pwrseq>;
+       non-removable;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+       sd-uhs-sdr104;
+       status = "okay";
+};
+
+&sdhci {
+       bus-width = <8>;
+       mmc-hs200-1_8v;
+       non-removable;
+       status = "okay";
+};
+
+&spi1 {
+       max-freq = <10000000>;
+       status = "okay";
+
+       spiflash: flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               m25p,fast-read;
+               spi-max-frequency = <10000000>;
+       };
+};
+
+&tcphy0 {
+       status = "okay";
+};
+
+&tcphy0_dp {
+       port {
+               tcphy0_typec_dp: endpoint {
+                       remote-endpoint = <&usbc_dp>;
+               };
+       };
+};
+
+&tcphy0_usb3 {
+       port {
+               tcphy0_typec_ss: endpoint {
+                       remote-endpoint = <&usbc_ss>;
+               };
+       };
+};
+
+&tcphy1 {
+       status = "okay";
+};
+
+&tsadc {
+       /* tshut mode 0:CRU 1:GPIO */
+       rockchip,hw-tshut-mode = <1>;
+       /* tshut polarity 0:LOW 1:HIGH */
+       rockchip,hw-tshut-polarity = <1>;
+       status = "okay";
+};
+
+&u2phy0 {
+       status = "okay";
+
+       u2phy0_otg: otg-port {
+               status = "okay";
+       };
+
+       u2phy0_host: host-port {
+               phy-supply = <&vcc5v0_otg>;
+               status = "okay";
+       };
+
+       port {
+               u2phy0_typec_hs: endpoint {
+                       remote-endpoint = <&usbc_hs>;
+               };
+       };
+};
+
+&u2phy1 {
+       status = "okay";
+
+       u2phy1_otg: otg-port {
+               status = "okay";
+       };
+
+       u2phy1_host: host-port {
+               phy-supply = <&vcc5v0_otg>;
+               status = "okay";
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm4345c5";
+               clocks = <&rk808 1>;
+               clock-names = "lpo";
+               device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+               host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+               max-speed = <1500000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
+               shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+               vbat-supply = <&wifi_bat>;
+               vddio-supply = <&vcc_wl>;
+       };
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&usb_host0_ehci {
+       status = "okay";
+};
+
+&usb_host0_ohci {
+       status = "okay";
+};
+
+&usb_host1_ehci {
+       status = "okay";
+};
+
+&usb_host1_ohci {
+       status = "okay";
+};
+
+&usbdrd3_0 {
+       status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&usbdrd3_1 {
+       status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&vopb {
+       status = "okay";
+};
+
+&vopb_mmu {
+       status = "okay";
+};
+
+&vopl {
+       status = "okay";
+};
+
+&vopl_mmu {
+       status = "okay";
+};