*/
#include <common.h>
+#include <netdev.h>
#include <config.h>
#include <command.h>
#include <asm/blackfin.h>
return 0;
}
+
+#ifdef CONFIG_SMC911X
+int board_eth_init(bd_t *bis)
+{
+ return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+}
+#endif
#include <common.h>
#include <config.h>
#include <command.h>
+#include <netdev.h>
#include <asm/blackfin.h>
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
#include <common.h>
+#include <netdev.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
printf("Board: i.MX31 MAX PDK (3DS)\n");
return 0;
}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
#include <common.h>
+#include <netdev.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
printf("Board: i.MX31 Litekit\n");
return 0;
}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
#include <common.h>
#include <s6e63d6.h>
+#include <netdev.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
printf("Board: Phytec phyCore i.MX31\n");
return 0;
}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
*/
#include <common.h>
+#include <netdev.h>
#include <asm/io.h>
#include "vct.h"
* Accessor functions replacing the "weak" functions in
* drivers/net/smc911x.c
*/
-u32 smc911x_reg_read(u32 addr)
+u32 smc911x_reg_read(struct eth_device *dev, u32 addr)
{
volatile u32 data;
+ addr += dev->iobase;
reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004F);
ebi_wait();
reg_write(EBI_CPU_IO_ACCS(EBI_BASE), (EXT_DEVICE_CHANNEL_1 | addr));
return (data);
}
-void smc911x_reg_write(u32 addr, u32 data)
+void smc911x_reg_write(struct eth_device *dev, u32 addr, u32 data)
{
+ addr += dev->iobase;
reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004F);
ebi_wait();
reg_write(EBI_IO_ACCS_DATA(EBI_BASE), data);
ebi_wait();
}
-void pkt_data_push(u32 addr, u32 data)
+void pkt_data_push(struct eth_device *dev, u32 addr, u32 data)
{
+ addr += dev->iobase;
reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004A);
ebi_wait();
reg_write(EBI_IO_ACCS_DATA(EBI_BASE), data);
return;
}
-u32 pkt_data_pull(u32 addr)
+u32 pkt_data_pull(struct eth_device *dev, u32 addr)
{
volatile u32 data;
+ addr += dev->iobase;
reg_write(EBI_DEV1_CONFIG2(EBI_BASE), 0x0000004A);
ebi_wait();
reg_write(EBI_CPU_IO_ACCS(EBI_BASE), (EXT_DEVICE_CHANNEL_1 | addr));
return data;
}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_DRIVER_SMC911X_BASE);
+#endif
+ return rc;
+}
#include <common.h>
#include <command.h>
+#include <netdev.h>
#include <asm/mipsregs.h>
#include "vct.h"
return 0;
}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
* MA 02111-1307 USA
*/
#include <common.h>
+#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
udelay(1);
writel(GPIO0, &gpio3_base->setdataout);
}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
*/
#include <common.h>
+#include <netdev.h>
#include <asm/io.h>
#include <asm/processor.h>
udelay(FPGA_NAND_RST_WAIT);
outw(FPGA_NAND_INIT, FPGA_NAND_CTL);
}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
*/
#include <common.h>
+#include <netdev.h>
#include <asm/io.h>
#include <asm/processor.h>
* And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
* functions necessary to solve this problem.
*/
-u32 pkt_data_pull(u32 addr)
+u32 pkt_data_pull(struct eth_device *dev, u32 addr)
{
- volatile u16 *addr_16 = (u16 *)addr;
+ volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
| swab16(*(addr_16 + 1));
}
-void pkt_data_push(u32 addr, u32 val)
+void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
{
+ addr += dev->iobase;
*(volatile u16 *)(addr + 2) = swab16((u16)val);
*(volatile u16 *)(addr) = swab16((u16)(val >> 16));
}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_SMC911X
+ rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return rc;
+}
COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o
COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
COBJS-$(CONFIG_DRIVER_SMC91111) += smc91111.o
-COBJS-$(CONFIG_DRIVER_SMC911X) += smc911x.o
+COBJS-$(CONFIG_SMC911X) += smc911x.o
COBJS-$(CONFIG_TIGON3) += tigon3.o bcm570x_autoneg.o 5701rls.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
COBJS-$(CONFIG_TSEC_ENET) += tsec.o
#include <common.h>
#include <command.h>
+#include <malloc.h>
#include <net.h>
#include <miiphy.h>
#include "smc911x.h"
-u32 pkt_data_pull(u32 addr) \
+u32 pkt_data_pull(struct eth_device *dev, u32 addr) \
__attribute__ ((weak, alias ("smc911x_reg_read")));
-void pkt_data_push(u32 addr, u32 val) \
+void pkt_data_push(struct eth_device *dev, u32 addr, u32 val) \
__attribute__ ((weak, alias ("smc911x_reg_write")));
#define mdelay(n) udelay((n)*1000)
-static int smx911x_handle_mac_address(bd_t *bd)
+static void smx911x_handle_mac_address(struct eth_device *dev)
{
unsigned long addrh, addrl;
- uchar m[6];
-
- if (eth_getenv_enetaddr("ethaddr", m)) {
- /* if the environment has a valid mac address then use it */
- addrl = m[0] | (m[1] << 8) | (m[2] << 16) | (m[3] << 24);
- addrh = m[4] | (m[5] << 8);
- smc911x_set_mac_csr(ADDRL, addrl);
- smc911x_set_mac_csr(ADDRH, addrh);
- } else {
- /* if not, try to get one from the eeprom */
- addrh = smc911x_get_mac_csr(ADDRH);
- addrl = smc911x_get_mac_csr(ADDRL);
-
- m[0] = (addrl ) & 0xff;
- m[1] = (addrl >> 8 ) & 0xff;
- m[2] = (addrl >> 16 ) & 0xff;
- m[3] = (addrl >> 24 ) & 0xff;
- m[4] = (addrh ) & 0xff;
- m[5] = (addrh >> 8 ) & 0xff;
-
- /* we get 0xff when there is no eeprom connected */
- if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) {
- printf(DRIVERNAME ": no valid mac address in environment "
- "and no eeprom found\n");
- return -1;
- }
-
- eth_setenv_enetaddr("ethaddr", m);
- }
+ uchar *m = dev->enetaddr;
- printf(DRIVERNAME ": MAC %pM\n", m);
+ addrl = m[0] | (m[1] << 8) | (m[2] << 16) | (m[3] << 24);
+ addrh = m[4] | (m[5] << 8);
+ smc911x_set_mac_csr(dev, ADDRL, addrl);
+ smc911x_set_mac_csr(dev, ADDRH, addrh);
- return 0;
+ printf(DRIVERNAME ": MAC %pM\n", m);
}
-static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val)
+static int smc911x_miiphy_read(struct eth_device *dev,
+ u8 phy, u8 reg, u16 *val)
{
- while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY)
+ while (smc911x_get_mac_csr(dev, MII_ACC) & MII_ACC_MII_BUSY)
;
- smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY);
+ smc911x_set_mac_csr(dev, MII_ACC, phy << 11 | reg << 6 |
+ MII_ACC_MII_BUSY);
- while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY)
+ while (smc911x_get_mac_csr(dev, MII_ACC) & MII_ACC_MII_BUSY)
;
- *val = smc911x_get_mac_csr(MII_DATA);
+ *val = smc911x_get_mac_csr(dev, MII_DATA);
return 0;
}
-static int smc911x_miiphy_write(u8 phy, u8 reg, u16 val)
+static int smc911x_miiphy_write(struct eth_device *dev,
+ u8 phy, u8 reg, u16 val)
{
- while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY)
+ while (smc911x_get_mac_csr(dev, MII_ACC) & MII_ACC_MII_BUSY)
;
- smc911x_set_mac_csr(MII_DATA, val);
- smc911x_set_mac_csr(MII_ACC,
+ smc911x_set_mac_csr(dev, MII_DATA, val);
+ smc911x_set_mac_csr(dev, MII_ACC,
phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE);
- while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY)
+ while (smc911x_get_mac_csr(dev, MII_ACC) & MII_ACC_MII_BUSY)
;
return 0;
}
-static int smc911x_phy_reset(void)
+static int smc911x_phy_reset(struct eth_device *dev)
{
u32 reg;
- reg = smc911x_reg_read(PMT_CTRL);
+ reg = smc911x_reg_read(dev, PMT_CTRL);
reg &= ~0xfffff030;
reg |= PMT_CTRL_PHY_RST;
- smc911x_reg_write(PMT_CTRL, reg);
+ smc911x_reg_write(dev, PMT_CTRL, reg);
mdelay(100);
return 0;
}
-static void smc911x_phy_configure(void)
+static void smc911x_phy_configure(struct eth_device *dev)
{
int timeout;
u16 status;
- smc911x_phy_reset();
+ smc911x_phy_reset(dev);
- smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET);
+ smc911x_miiphy_write(dev, 1, PHY_BMCR, PHY_BMCR_RESET);
mdelay(1);
- smc911x_miiphy_write(1, PHY_ANAR, 0x01e1);
- smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ smc911x_miiphy_write(dev, 1, PHY_ANAR, 0x01e1);
+ smc911x_miiphy_write(dev, 1, PHY_BMCR, PHY_BMCR_AUTON |
+ PHY_BMCR_RST_NEG);
timeout = 5000;
do {
if ((timeout--) == 0)
goto err_out;
- if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0)
+ if (smc911x_miiphy_read(dev, 1, PHY_BMSR, &status) != 0)
goto err_out;
} while (!(status & PHY_BMSR_LS));
printf(DRIVERNAME ": autonegotiation timed out\n");
}
-static void smc911x_enable(void)
+static void smc911x_enable(struct eth_device *dev)
{
/* Enable TX */
- smc911x_reg_write(HW_CFG, 8 << 16 | HW_CFG_SF);
+ smc911x_reg_write(dev, HW_CFG, 8 << 16 | HW_CFG_SF);
- smc911x_reg_write(GPT_CFG, GPT_CFG_TIMER_EN | 10000);
+ smc911x_reg_write(dev, GPT_CFG, GPT_CFG_TIMER_EN | 10000);
- smc911x_reg_write(TX_CFG, TX_CFG_TX_ON);
+ smc911x_reg_write(dev, TX_CFG, TX_CFG_TX_ON);
/* no padding to start of packets */
- smc911x_reg_write(RX_CFG, 0);
+ smc911x_reg_write(dev, RX_CFG, 0);
- smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
+ smc911x_set_mac_csr(dev, MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN |
+ MAC_CR_HBDIS);
}
-int eth_init(bd_t *bd)
+static int smc911x_init(struct eth_device *dev, bd_t * bd)
{
printf(DRIVERNAME ": initializing\n");
- if (smc911x_detect_chip())
+ if (smc911x_detect_chip(dev))
goto err_out;
- smc911x_reset();
+ smc911x_reset(dev);
/* Configure the PHY, initialize the link state */
- smc911x_phy_configure();
+ smc911x_phy_configure(dev);
- if (smx911x_handle_mac_address(bd))
- goto err_out;
+ smx911x_handle_mac_address(dev);
/* Turn on Tx + Rx */
- smc911x_enable();
+ smc911x_enable(dev);
return 0;
return -1;
}
-int eth_send(volatile void *packet, int length)
+static int smc911x_send(struct eth_device *dev,
+ volatile void *packet, int length)
{
u32 *data = (u32*)packet;
u32 tmplen;
u32 status;
- smc911x_reg_write(TX_DATA_FIFO, TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length);
- smc911x_reg_write(TX_DATA_FIFO, length);
+ smc911x_reg_write(dev, TX_DATA_FIFO, TX_CMD_A_INT_FIRST_SEG |
+ TX_CMD_A_INT_LAST_SEG | length);
+ smc911x_reg_write(dev, TX_DATA_FIFO, length);
tmplen = (length + 3) / 4;
while (tmplen--)
- pkt_data_push(TX_DATA_FIFO, *data++);
+ pkt_data_push(dev, TX_DATA_FIFO, *data++);
/* wait for transmission */
- while (!((smc911x_reg_read(TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16));
+ while (!((smc911x_reg_read(dev, TX_FIFO_INF) &
+ TX_FIFO_INF_TSUSED) >> 16));
/* get status. Ignore 'no carrier' error, it has no meaning for
* full duplex operation
*/
- status = smc911x_reg_read(TX_STATUS_FIFO) & (TX_STS_LOC | TX_STS_LATE_COLL |
- TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
+ status = smc911x_reg_read(dev, TX_STATUS_FIFO) &
+ (TX_STS_LOC | TX_STS_LATE_COLL | TX_STS_MANY_COLL |
+ TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
if (!status)
return 0;
return -1;
}
-void eth_halt(void)
+static void smc911x_halt(struct eth_device *dev)
{
- smc911x_reset();
+ smc911x_reset(dev);
}
-int eth_rx(void)
+static int smc911x_rx(struct eth_device *dev)
{
u32 *data = (u32 *)NetRxPackets[0];
u32 pktlen, tmplen;
u32 status;
- if ((smc911x_reg_read(RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) {
- status = smc911x_reg_read(RX_STATUS_FIFO);
+ if ((smc911x_reg_read(dev, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) {
+ status = smc911x_reg_read(dev, RX_STATUS_FIFO);
pktlen = (status & RX_STS_PKT_LEN) >> 16;
- smc911x_reg_write(RX_CFG, 0);
+ smc911x_reg_write(dev, RX_CFG, 0);
tmplen = (pktlen + 2+ 3) / 4;
while (tmplen--)
- *data++ = pkt_data_pull(RX_DATA_FIFO);
+ *data++ = pkt_data_pull(dev, RX_DATA_FIFO);
if (status & RX_STS_ES)
printf(DRIVERNAME
return 0;
}
+
+int smc911x_initialize(u8 dev_num, int base_addr)
+{
+ unsigned long addrl, addrh;
+ struct eth_device *dev;
+
+ dev = malloc(sizeof(*dev));
+ if (!dev) {
+ free(dev);
+ return 0;
+ }
+ memset(dev, 0, sizeof(*dev));
+
+ dev->iobase = base_addr;
+
+ addrh = smc911x_get_mac_csr(dev, ADDRH);
+ addrl = smc911x_get_mac_csr(dev, ADDRL);
+ dev->enetaddr[0] = addrl;
+ dev->enetaddr[1] = addrl >> 8;
+ dev->enetaddr[2] = addrl >> 16;
+ dev->enetaddr[3] = addrl >> 24;
+ dev->enetaddr[4] = addrh;
+ dev->enetaddr[5] = addrh >> 8;
+
+ dev->init = smc911x_init;
+ dev->halt = smc911x_halt;
+ dev->send = smc911x_send;
+ dev->recv = smc911x_rx;
+ sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num);
+
+ eth_register(dev);
+ return 0;
+}
#include <linux/types.h>
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT) && \
- defined (CONFIG_DRIVER_SMC911X_16_BIT)
-#error "SMC911X: Only one of CONFIG_DRIVER_SMC911X_32_BIT and \
- CONFIG_DRIVER_SMC911X_16_BIT shall be set"
+#define DRIVERNAME "smc911x"
+
+#if defined (CONFIG_SMC911X_32_BIT) && \
+ defined (CONFIG_SMC911X_16_BIT)
+#error "SMC911X: Only one of CONFIG_SMC911X_32_BIT and \
+ CONFIG_SMC911X_16_BIT shall be set"
#endif
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT)
-static inline u32 __smc911x_reg_read(u32 addr)
+#if defined (CONFIG_SMC911X_32_BIT)
+static inline u32 __smc911x_reg_read(struct eth_device *dev, u32 offset)
{
- return *(volatile u32*)addr;
+ return *(volatile u32*)(dev->iobase + offset);
}
-u32 smc911x_reg_read(u32 addr) __attribute__((weak, alias("__smc911x_reg_read")));
+u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
+ __attribute__((weak, alias("__smc911x_reg_read")));
-static inline void __smc911x_reg_write(u32 addr, u32 val)
+static inline void __smc911x_reg_write(struct eth_device *dev,
+ u32 offset, u32 val)
{
- *(volatile u32*)addr = val;
+ *(volatile u32*)(dev->iobase + offset) = val;
}
-void smc911x_reg_write(u32 addr, u32 val) __attribute__((weak, alias("__smc911x_reg_write")));
-#elif defined (CONFIG_DRIVER_SMC911X_16_BIT)
-static inline u32 smc911x_reg_read(u32 addr)
+void smc911x_reg_write(struct eth_device *dev, u32 offset, u32 val)
+ __attribute__((weak, alias("__smc911x_reg_write")));
+#elif defined (CONFIG_SMC911X_16_BIT)
+static inline u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
{
- volatile u16 *addr_16 = (u16 *)addr;
+ volatile u16 *addr_16 = (u16 *)(dev->iobase + offset);
return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
}
-static inline void smc911x_reg_write(u32 addr, u32 val)
+static inline void smc911x_reg_write(struct eth_device *dev,
+ u32 offset, u32 val)
{
- *(volatile u16*)addr = (u16)val;
- *(volatile u16*)(addr + 2) = (u16)(val >> 16);
+ *(volatile u16 *)(dev->iobase + offset) = (u16)val;
+ *(volatile u16 *)(dev->iobase + offset + 2) = (u16)(val >> 16);
}
#else
#error "SMC911X: undefined bus width"
-#endif /* CONFIG_DRIVER_SMC911X_16_BIT */
+#endif /* CONFIG_SMC911X_16_BIT */
/* Below are the register offsets and bit definitions
* of the Lan911x memory space
*/
-#define RX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x00)
+#define RX_DATA_FIFO 0x00
-#define TX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x20)
+#define TX_DATA_FIFO 0x20
#define TX_CMD_A_INT_ON_COMP 0x80000000
#define TX_CMD_A_INT_BUF_END_ALGN 0x03000000
#define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000
#define TX_CMD_B_DISABLE_PADDING 0x00001000
#define TX_CMD_B_PKT_BYTE_LENGTH 0x000007FF
-#define RX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x40)
+#define RX_STATUS_FIFO 0x40
#define RX_STS_PKT_LEN 0x3FFF0000
#define RX_STS_ES 0x00008000
#define RX_STS_BCST 0x00002000
#define RX_STS_MII_ERR 0x00000008
#define RX_STS_DRIBBLING 0x00000004
#define RX_STS_CRC_ERR 0x00000002
-#define RX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x44)
-#define TX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x48)
+#define RX_STATUS_FIFO_PEEK 0x44
+#define TX_STATUS_FIFO 0x48
#define TX_STS_TAG 0xFFFF0000
#define TX_STS_ES 0x00008000
#define TX_STS_LOC 0x00000800
#define TX_STS_MANY_DEFER 0x00000004
#define TX_STS_UNDERRUN 0x00000002
#define TX_STS_DEFERRED 0x00000001
-#define TX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x4C)
-#define ID_REV (CONFIG_DRIVER_SMC911X_BASE + 0x50)
+#define TX_STATUS_FIFO_PEEK 0x4C
+#define ID_REV 0x50
#define ID_REV_CHIP_ID 0xFFFF0000 /* RO */
#define ID_REV_REV_ID 0x0000FFFF /* RO */
-#define INT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x54)
+#define INT_CFG 0x54
#define INT_CFG_INT_DEAS 0xFF000000 /* R/W */
#define INT_CFG_INT_DEAS_CLR 0x00004000
#define INT_CFG_INT_DEAS_STS 0x00002000
#define INT_CFG_IRQ_INT 0x00001000 /* RO */
#define INT_CFG_IRQ_EN 0x00000100 /* R/W */
-#define INT_CFG_IRQ_POL 0x00000010 /* R/W Not Affected by SW Reset */
-#define INT_CFG_IRQ_TYPE 0x00000001 /* R/W Not Affected by SW Reset */
+ /* R/W Not Affected by SW Reset */
+#define INT_CFG_IRQ_POL 0x00000010
+ /* R/W Not Affected by SW Reset */
+#define INT_CFG_IRQ_TYPE 0x00000001
-#define INT_STS (CONFIG_DRIVER_SMC911X_BASE + 0x58)
+#define INT_STS 0x58
#define INT_STS_SW_INT 0x80000000 /* R/WC */
#define INT_STS_TXSTOP_INT 0x02000000 /* R/WC */
#define INT_STS_RXSTOP_INT 0x01000000 /* R/WC */
#define INT_STS_GPIO2_INT 0x00000004 /* R/WC */
#define INT_STS_GPIO1_INT 0x00000002 /* R/WC */
#define INT_STS_GPIO0_INT 0x00000001 /* R/WC */
-#define INT_EN (CONFIG_DRIVER_SMC911X_BASE + 0x5C)
+#define INT_EN 0x5C
#define INT_EN_SW_INT_EN 0x80000000 /* R/W */
#define INT_EN_TXSTOP_INT_EN 0x02000000 /* R/W */
#define INT_EN_RXSTOP_INT_EN 0x01000000 /* R/W */
#define INT_EN_GPIO1_INT 0x00000002 /* R/W */
#define INT_EN_GPIO0_INT 0x00000001 /* R/W */
-#define BYTE_TEST (CONFIG_DRIVER_SMC911X_BASE + 0x64)
-#define FIFO_INT (CONFIG_DRIVER_SMC911X_BASE + 0x68)
+#define BYTE_TEST 0x64
+#define FIFO_INT 0x68
#define FIFO_INT_TX_AVAIL_LEVEL 0xFF000000 /* R/W */
#define FIFO_INT_TX_STS_LEVEL 0x00FF0000 /* R/W */
#define FIFO_INT_RX_AVAIL_LEVEL 0x0000FF00 /* R/W */
#define FIFO_INT_RX_STS_LEVEL 0x000000FF /* R/W */
-#define RX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x6C)
+#define RX_CFG 0x6C
#define RX_CFG_RX_END_ALGN 0xC0000000 /* R/W */
#define RX_CFG_RX_END_ALGN4 0x00000000 /* R/W */
#define RX_CFG_RX_END_ALGN16 0x40000000 /* R/W */
#define RX_CFG_RXDOFF 0x00001F00 /* R/W */
/*#define RX_CFG_RXBAD 0x00000001*/ /* R/W */
-#define TX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x70)
+#define TX_CFG 0x70
/*#define TX_CFG_TX_DMA_LVL 0xE0000000*/ /* R/W */
-/*#define TX_CFG_TX_DMA_CNT 0x0FFF0000*/ /* R/W Self Clearing */
+ /* R/W Self Clearing */
+/*#define TX_CFG_TX_DMA_CNT 0x0FFF0000*/
#define TX_CFG_TXS_DUMP 0x00008000 /* Self Clearing */
#define TX_CFG_TXD_DUMP 0x00004000 /* Self Clearing */
#define TX_CFG_TXSAO 0x00000004 /* R/W */
#define TX_CFG_TX_ON 0x00000002 /* R/W */
#define TX_CFG_STOP_TX 0x00000001 /* Self Clearing */
-#define HW_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x74)
+#define HW_CFG 0x74
#define HW_CFG_TTM 0x00200000 /* R/W */
#define HW_CFG_SF 0x00100000 /* R/W */
#define HW_CFG_TX_FIF_SZ 0x000F0000 /* R/W */
#define HW_CFG_SRST_TO 0x00000002 /* RO */
#define HW_CFG_SRST 0x00000001 /* Self Clearing */
-#define RX_DP_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x78)
+#define RX_DP_CTRL 0x78
#define RX_DP_CTRL_RX_FFWD 0x80000000 /* R/W */
#define RX_DP_CTRL_FFWD_BUSY 0x80000000 /* RO */
-#define RX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x7C)
+#define RX_FIFO_INF 0x7C
#define RX_FIFO_INF_RXSUSED 0x00FF0000 /* RO */
#define RX_FIFO_INF_RXDUSED 0x0000FFFF /* RO */
-#define TX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x80)
+#define TX_FIFO_INF 0x80
#define TX_FIFO_INF_TSUSED 0x00FF0000 /* RO */
#define TX_FIFO_INF_TDFREE 0x0000FFFF /* RO */
-#define PMT_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x84)
+#define PMT_CTRL 0x84
#define PMT_CTRL_PM_MODE 0x00003000 /* Self Clearing */
#define PMT_CTRL_PHY_RST 0x00000400 /* Self Clearing */
#define PMT_CTRL_WOL_EN 0x00000200 /* R/W */
#define PMT_CTRL_ED_EN 0x00000100 /* R/W */
-#define PMT_CTRL_PME_TYPE 0x00000040 /* R/W Not Affected by SW Reset */
+ /* R/W Not Affected by SW Reset */
+#define PMT_CTRL_PME_TYPE 0x00000040
#define PMT_CTRL_WUPS 0x00000030 /* R/WC */
#define PMT_CTRL_WUPS_NOWAKE 0x00000000 /* R/WC */
#define PMT_CTRL_WUPS_ED 0x00000010 /* R/WC */
#define PMT_CTRL_WUPS_MULTI 0x00000030 /* R/WC */
#define PMT_CTRL_PME_IND 0x00000008 /* R/W */
#define PMT_CTRL_PME_POL 0x00000004 /* R/W */
-#define PMT_CTRL_PME_EN 0x00000002 /* R/W Not Affected by SW Reset */
+ /* R/W Not Affected by SW Reset */
+#define PMT_CTRL_PME_EN 0x00000002
#define PMT_CTRL_READY 0x00000001 /* RO */
-#define GPIO_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x88)
+#define GPIO_CFG 0x88
#define GPIO_CFG_LED3_EN 0x40000000 /* R/W */
#define GPIO_CFG_LED2_EN 0x20000000 /* R/W */
#define GPIO_CFG_LED1_EN 0x10000000 /* R/W */
#define GPIO_CFG_GPIOD1 0x00000002 /* R/W */
#define GPIO_CFG_GPIOD0 0x00000001 /* R/W */
-#define GPT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x8C)
+#define GPT_CFG 0x8C
#define GPT_CFG_TIMER_EN 0x20000000 /* R/W */
#define GPT_CFG_GPT_LOAD 0x0000FFFF /* R/W */
-#define GPT_CNT (CONFIG_DRIVER_SMC911X_BASE + 0x90)
+#define GPT_CNT 0x90
#define GPT_CNT_GPT_CNT 0x0000FFFF /* RO */
-#define ENDIAN (CONFIG_DRIVER_SMC911X_BASE + 0x98)
-#define FREE_RUN (CONFIG_DRIVER_SMC911X_BASE + 0x9C)
-#define RX_DROP (CONFIG_DRIVER_SMC911X_BASE + 0xA0)
-#define MAC_CSR_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xA4)
+#define ENDIAN 0x98
+#define FREE_RUN 0x9C
+#define RX_DROP 0xA0
+#define MAC_CSR_CMD 0xA4
#define MAC_CSR_CMD_CSR_BUSY 0x80000000 /* Self Clearing */
#define MAC_CSR_CMD_R_NOT_W 0x40000000 /* R/W */
#define MAC_CSR_CMD_CSR_ADDR 0x000000FF /* R/W */
-#define MAC_CSR_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xA8)
-#define AFC_CFG (CONFIG_DRIVER_SMC911X_BASE + 0xAC)
+#define MAC_CSR_DATA 0xA8
+#define AFC_CFG 0xAC
#define AFC_CFG_AFC_HI 0x00FF0000 /* R/W */
#define AFC_CFG_AFC_LO 0x0000FF00 /* R/W */
#define AFC_CFG_BACK_DUR 0x000000F0 /* R/W */
#define AFC_CFG_FCADD 0x00000002 /* R/W */
#define AFC_CFG_FCANY 0x00000001 /* R/W */
-#define E2P_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xB0)
+#define E2P_CMD 0xB0
#define E2P_CMD_EPC_BUSY 0x80000000 /* Self Clearing */
#define E2P_CMD_EPC_CMD 0x70000000 /* R/W */
#define E2P_CMD_EPC_CMD_READ 0x00000000 /* R/W */
#define E2P_CMD_MAC_ADDR_LOADED 0x00000100 /* RO */
#define E2P_CMD_EPC_ADDR 0x000000FF /* R/W */
-#define E2P_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xB4)
+#define E2P_DATA 0xB4
#define E2P_DATA_EEPROM_DATA 0x000000FF /* R/W */
/* end of LAN register offsets and bit definitions */
{ 0, NULL },
};
-
-#define DRIVERNAME "smc911x"
-
-static u32 smc911x_get_mac_csr(u8 reg)
+static u32 smc911x_get_mac_csr(struct eth_device *dev, u8 reg)
{
- while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
;
- smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
- while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ smc911x_reg_write(dev, MAC_CSR_CMD,
+ MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
+ while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
;
- return smc911x_reg_read(MAC_CSR_DATA);
+ return smc911x_reg_read(dev, MAC_CSR_DATA);
}
-static void smc911x_set_mac_csr(u8 reg, u32 data)
+static void smc911x_set_mac_csr(struct eth_device *dev, u8 reg, u32 data)
{
- while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
;
- smc911x_reg_write(MAC_CSR_DATA, data);
- smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
- while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ smc911x_reg_write(dev, MAC_CSR_DATA, data);
+ smc911x_reg_write(dev, MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
+ while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
;
}
-static int smc911x_detect_chip(void)
+static int smc911x_detect_chip(struct eth_device *dev)
{
unsigned long val, i;
- val = smc911x_reg_read(BYTE_TEST);
+ val = smc911x_reg_read(dev, BYTE_TEST);
if (val != 0x87654321) {
printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
return -1;
}
- val = smc911x_reg_read(ID_REV) >> 16;
+ val = smc911x_reg_read(dev, ID_REV) >> 16;
for (i = 0; chip_ids[i].id != 0; i++) {
if (chip_ids[i].id == val) break;
}
return 0;
}
-static void smc911x_reset(void)
+static void smc911x_reset(struct eth_device *dev)
{
int timeout;
/* Take out of PM setting first */
- if (smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY) {
+ if (smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY) {
/* Write to the bytetest will take out of powerdown */
- smc911x_reg_write(BYTE_TEST, 0x0);
+ smc911x_reg_write(dev, BYTE_TEST, 0x0);
timeout = 10;
- while (timeout-- && !(smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY))
+ while (timeout-- &&
+ !(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY))
udelay(10);
if (!timeout) {
printf(DRIVERNAME
}
/* Disable interrupts */
- smc911x_reg_write(INT_EN, 0);
+ smc911x_reg_write(dev, INT_EN, 0);
- smc911x_reg_write(HW_CFG, HW_CFG_SRST);
+ smc911x_reg_write(dev, HW_CFG, HW_CFG_SRST);
timeout = 1000;
- while (timeout-- && smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
+ while (timeout-- && smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
udelay(10);
if (!timeout) {
}
/* Reset the FIFO level and flow control settings */
- smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
- smc911x_reg_write(AFC_CFG, 0x0050287F);
+ smc911x_set_mac_csr(dev, FLOW, FLOW_FCPT | FLOW_FCEN);
+ smc911x_reg_write(dev, AFC_CFG, 0x0050287F);
/* Set to LED outputs */
- smc911x_reg_write(GPIO_CFG, 0x70070000);
+ smc911x_reg_write(dev, GPIO_CFG, 0x70070000);
}
#endif
#undef CONFIG_SHOW_BOOT_PROGRESS
/* SMC9118 */
-#define CONFIG_DRIVER_SMC911X 1
-#define CONFIG_DRIVER_SMC911X_32_BIT 1
-#define CONFIG_DRIVER_SMC911X_BASE 0xB6080000
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_32_BIT 1
+#define CONFIG_SMC911X_BASE 0xB6080000
/* MEMORY */
#define AP325RXA_SDRAM_BASE (0x88000000)
* Network Settings
*/
#define ADI_CMDS_NETWORK 1
-#define CONFIG_DRIVER_SMC911X 1
-#define CONFIG_DRIVER_SMC911X_BASE 0x24000000
-#define CONFIG_DRIVER_SMC911X_16_BIT
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_BASE 0x24000000
+#define CONFIG_SMC911X_16_BIT
#define CONFIG_HOSTNAME bf548-ezkit
/* Uncomment next line to use fixed MAC address */
/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
* Network Settings
*/
#define ADI_CMDS_NETWORK 1
-#define CONFIG_DRIVER_SMC911X 1
-#define CONFIG_DRIVER_SMC911X_BASE 0x24000000
-#define CONFIG_DRIVER_SMC911X_16_BIT
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_BASE 0x24000000
+#define CONFIG_SMC911X_16_BIT
#define CONFIG_HOSTNAME cm-bf548
/* Uncomment next line to use fixed MAC address */
/* #define CONFIG_ETHADDR 02:80:ad:24:31:91 */
"prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0"
-#define CONFIG_DRIVER_SMC911X 1
-#define CONFIG_DRIVER_SMC911X_BASE (CS4_BASE + 0x00020000)
-#define CONFIG_DRIVER_SMC911X_32_BIT 1
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_BASE (CS4_BASE + 0x00020000)
+#define CONFIG_SMC911X_32_BIT 1
/*
* Miscellaneous configurable options
"prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0"
-#define CONFIG_DRIVER_SMC911X 1
-#define CONFIG_DRIVER_SMC911X_BASE 0xa8000000
-#define CONFIG_DRIVER_SMC911X_32_BIT 1
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_BASE 0xa8000000
+#define CONFIG_SMC911X_32_BIT 1
/*
* Miscellaneous configurable options
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
"tftpboot 0x81000000 uImage-mx31; bootm\0"
-#define CONFIG_DRIVER_SMC911X 1
-#define CONFIG_DRIVER_SMC911X_BASE 0xB6000000
-#define CONFIG_DRIVER_SMC911X_32_BIT 1
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_BASE 0xB6000000
+#define CONFIG_SMC911X_32_BIT 1
/*
* Miscellaneous configurable options
*/
#if defined(CONFIG_CMD_NET)
-#define CONFIG_DRIVER_SMC911X
-#define CONFIG_DRIVER_SMC911X_32_BIT
-#define CONFIG_DRIVER_SMC911X_BASE 0x2C000000
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE 0x2C000000
#endif /* (CONFIG_CMD_NET) */
#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
/* Network interface */
-#define CONFIG_DRIVER_SMC911X
-#define CONFIG_DRIVER_SMC911X_16_BIT
-#define CONFIG_DRIVER_SMC911X_BASE (0x24000000)
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_SMC911X_BASE (0x24000000)
#endif /* __RSK7203_H */
/*
* SMSC91C11x Network Card
*/
-#define CONFIG_DRIVER_SMC911X
-#define CONFIG_DRIVER_SMC911X_BASE 0x00000000
-#define CONFIG_DRIVER_SMC911X_32_BIT
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE 0x00000000
+#define CONFIG_SMC911X_32_BIT
#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_NET_MULTI
#endif
/*
#undef CONFIG_CMD_TERMINAL
#undef CONFIG_CMD_USB
-#undef CONFIG_DRIVER_SMC911X
+#undef CONFIG_SMC911X
#undef CONFIG_SOFT_I2C
#undef CONFIG_SOURCE
#undef CONFIG_SYS_LONGHELP
int rtl8169_initialize(bd_t *bis);
int scc_initialize(bd_t *bis);
int skge_initialize(bd_t *bis);
+int smc911x_initialize(u8 dev_num, int base_addr);
int tsi108_eth_initialize(bd_t *bis);
int uec_initialize(int index);
int uec_standard_init(bd_t *bis);
projects / platform / kernel / u-boot.git / commitdiff