VIRTCHNL_OP_SET_RSS_HENA = 26,
};
+/* This macro is used to generate a compilation error if a structure
+ * is not exactly the correct length. It gives a divide by zero error if the
+ * structure is not of the correct size, otherwise it creates an enum that is
+ * never used.
+ */
+#define VIRTCHNL_CHECK_STRUCT_LEN(n, X) enum virtchnl_static_assert_enum_##X \
+ { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
+
/* Virtual channel message descriptor. This overlays the admin queue
* descriptor. All other data is passed in external buffers.
*/
u32 vfid; /* used by PF when sending to VF */
};
+VIRTCHNL_CHECK_STRUCT_LEN(20, virtchnl_msg);
+
/* Message descriptions and data structures.*/
/* VIRTCHNL_OP_VERSION
u32 minor;
};
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_version_info);
+
#define VF_IS_V10(_v) (((_v)->major == 1) && ((_v)->minor == 0))
#define VF_IS_V11(_ver) (((_ver)->major == 1) && ((_ver)->minor == 1))
u8 default_mac_addr[ETH_ALEN];
};
+VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
+
/* VF offload flags
* VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including
* TX/RX Checksum offloading and TSO for non-tunnelled packets.
struct virtchnl_vsi_resource vsi_res[1];
};
+VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_vf_resource);
+
/* VIRTCHNL_OP_CONFIG_TX_QUEUE
* VF sends this message to set up parameters for one TX queue.
* External data buffer contains one instance of virtchnl_txq_info.
u64 dma_headwb_addr; /* deprecated with AVF 1.0 */
};
+VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info);
+
/* VIRTCHNL_OP_CONFIG_RX_QUEUE
* VF sends this message to set up parameters for one RX queue.
* External data buffer contains one instance of virtchnl_rxq_info.
u32 pad2;
};
+VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_rxq_info);
+
/* VIRTCHNL_OP_CONFIG_VSI_QUEUES
* VF sends this message to set parameters for all active TX and RX queues
* associated with the specified VSI.
struct virtchnl_rxq_info rxq;
};
+VIRTCHNL_CHECK_STRUCT_LEN(64, virtchnl_queue_pair_info);
+
struct virtchnl_vsi_queue_config_info {
u16 vsi_id;
u16 num_queue_pairs;
struct virtchnl_queue_pair_info qpair[1];
};
+VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_vsi_queue_config_info);
+
/* VIRTCHNL_OP_CONFIG_IRQ_MAP
* VF uses this message to map vectors to queues.
* The rxq_map and txq_map fields are bitmaps used to indicate which queues
u16 txitr_idx;
};
+VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_vector_map);
+
struct virtchnl_irq_map_info {
u16 num_vectors;
struct virtchnl_vector_map vecmap[1];
};
+VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_irq_map_info);
+
/* VIRTCHNL_OP_ENABLE_QUEUES
* VIRTCHNL_OP_DISABLE_QUEUES
* VF sends these message to enable or disable TX/RX queue pairs.
u32 tx_queues;
};
+VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select);
+
/* VIRTCHNL_OP_ADD_ETH_ADDR
* VF sends this message in order to add one or more unicast or multicast
* address filters for the specified VSI.
u8 pad[2];
};
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr);
+
struct virtchnl_ether_addr_list {
u16 vsi_id;
u16 num_elements;
struct virtchnl_ether_addr list[1];
};
+VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_ether_addr_list);
+
/* VIRTCHNL_OP_ADD_VLAN
* VF sends this message to add one or more VLAN tag filters for receives.
* PF adds the filters and returns status.
u16 vlan_id[1];
};
+VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
+
/* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
* VF sends VSI id and flags.
* PF returns status code in retval.
u16 flags;
};
+VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_promisc_info);
+
#define FLAG_VF_UNICAST_PROMISC 0x00000001
#define FLAG_VF_MULTICAST_PROMISC 0x00000002
u8 key[1]; /* RSS hash key, packed bytes */
};
+VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_key);
+
struct virtchnl_rss_lut {
u16 vsi_id;
u16 lut_entries;
u8 lut[1]; /* RSS lookup table*/
};
+VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_lut);
+
/* VIRTCHNL_OP_GET_RSS_HENA_CAPS
* VIRTCHNL_OP_SET_RSS_HENA
* VF sends these messages to get and set the hash filter enable bits for RSS.
u64 hena;
};
+VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hena);
+
/* VIRTCHNL_OP_EVENT
* PF sends this message to inform the VF driver of events that may affect it.
* No direct response is expected from the VF, though it may generate other
int severity;
};
+VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
+
/* VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP
* VF uses this message to request PF to map IWARP vectors to IWARP queues.
* The request for this originates from the VF IWARP driver through
u8 itr_idx;
};
+VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_iwarp_qv_info);
+
struct virtchnl_iwarp_qvlist_info {
u32 num_vectors;
struct virtchnl_iwarp_qv_info qv_info[1];
};
+VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_iwarp_qvlist_info);
+
/* VF reset states - these are written into the RSTAT register:
* VFGEN_RSTAT on the VF
* When the PF initiates a reset, it writes 0