arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resets

Describe all Ethernet PHY reset GPIOs on R-Car Gen3 boards, to avoid
relying solely on boot loaders to bring PHYs out of reset.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3e6fd765850e8ef0980d8e98bc5f2126538d626f.1631177442.git.geert+renesas@glider.be

diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
index 5f5a0bb..eb0327c 100644 (file)
--- a/arch/arm64/boot/dts/renesas/draak.dtsi
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -249,6 +249,7 @@
                reg = <0>;
                interrupt-parent = <&gpio5>;
                interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
                /*
                 * TX clock internal delay mode is required for reliable
                 * 1Gbps communication using the KSZ9031RNX phy present on

diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index c745197..b579d31 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 #include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Renesas Eagle board based on r8a77970";
@@ -98,6 +99,7 @@
                reg = <0>;
                interrupt-parent = <&gpio1>;
                interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
        };
 };
 

diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 2f77ec4..39f3e6c 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 #include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Renesas V3M Starter Kit board";
@@ -113,6 +114,7 @@
                reg = <0>;
                interrupt-parent = <&gpio1>;
                interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
        };
 };
 

diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 4cb5bfa..3d6d10c 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 #include "r8a77980.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Renesas Condor board based on r8a77980";
@@ -138,6 +139,7 @@
                reg = <0>;
                interrupt-parent = <&gpio4>;
                interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
        };
 };
 

diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index ca69d1b..1d09d88 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 #include "r8a77980.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Renesas V3H Starter Kit board";
@@ -118,6 +119,7 @@
                reg = <0>;
                interrupt-parent = <&gpio4>;
                interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
        };
 };