OMAP3: pandora: update config for production
authorGrazvydas Ignotas <[notasas@gmail.com]>
Fri, 19 Nov 2010 16:25:36 +0000 (11:25 -0500)
committerSandeep Paulraj <s-paulraj@ti.com>
Fri, 19 Nov 2010 21:28:58 +0000 (16:28 -0500)
Update pandora's config so that it can boot production kernels from NAND.
This enables UBI, USB, sets up NAND layout and default boot command.
It also expands malloc area so that UBI works.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
include/configs/omap3_pandora.h

index f386bc4..72b0cc2 100644 (file)
@@ -1,6 +1,6 @@
 /*
- * (C) Copyright 2008
- * Grazvydas Ignotas <notasas@gmail.com>
+ * (C) Copyright 2008-2010
+ * GraΕΎvydas Ignotas <notasas@gmail.com>
  *
  * Configuration settings for the OMAP3 Pandora.
  *
  * Size of malloc() pool
  */
 #define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
-                                               /* Sector */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
-                                               /* initial data */
+#define CONFIG_SYS_MALLOC_LEN          (1024 * 1024 + CONFIG_ENV_SIZE)
 
 /*
  * Hardware drivers
  */
 
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
+#define CONFIG_SYS_DEVICE_NULLDEV      1
+
+/* USB */
+#define CONFIG_MUSB_UDC                        1
+#define CONFIG_USB_OMAP3               1
+#define CONFIG_TWL4030_USB             1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE              1
+#define CONFIG_USB_TTY                 1
+
 /*
  * NS16550 Configuration
  */
 
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
-#define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
 
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
 #define CONFIG_CMD_MMC         /* MMC support                  */
 #define CONFIG_CMD_NAND                /* NAND support                 */
+#define CONFIG_CMD_CACHE       /* Cache control                */
 
 #undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
 #undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND */
                                                /* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV               "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET       0x680000
-#define CONFIG_JFFS2_PART_SIZE         0xf980000       /* size of jffs2 */
-                                                       /* partition */
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+#define MTDIDS_DEFAULT                 "nand0=nand"
+#define MTDPARTS_DEFAULT               "mtdparts=nand:512k(xloader),"\
+                                       "1920k(uboot),128k(uboot-env),"\
+                                       "10m(boot),-(rootfs)"
+#else
+#define MTDPARTS_DEFAULT
+#endif
 
 /* Environment information */
 #define CONFIG_BOOTDELAY               1
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
+       "usbtty=cdc_acm\0" \
        "loadaddr=0x82000000\0" \
-       "console=ttyS0,115200n8\0" \
-       "videospec=omapfb:vram:2M,vram:4M\0" \
-       "mmcargs=setenv bootargs console=${console} " \
-               "video=${videospec} " \
-               "root=/dev/mmcblk0p2 rw " \
-               "rootfstype=ext3 rootwait\0" \
-       "nandargs=setenv bootargs console=${console} " \
-               "video=${videospec} " \
-               "root=/dev/mtdblock4 rw " \
-               "rootfstype=jffs2\0" \
-       "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
-       "bootscript=echo Running bootscript from mmc ...; " \
-               "source ${loadaddr}\0" \
-       "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
-       "mmcboot=echo Booting from mmc ...; " \
-               "run mmcargs; " \
-               "bootm ${loadaddr}\0" \
-       "nandboot=echo Booting from nand ...; " \
-               "run nandargs; " \
-               "nand read ${loadaddr} 280000 400000; " \
-               "bootm ${loadaddr}\0" \
+       "bootargs=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
+       "rw rootflags=bulk_read console=ttyS0,115200n8 " \
+       "vram=6272K omapfb.vram=0:3000K\0" \
+       "mtdparts=" MTDPARTS_DEFAULT "\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc init; then " \
-               "if run loadbootscript; then " \
-                       "run bootscript; " \
-               "else " \
-                       "if run loaduimage; then " \
-                               "run mmcboot; " \
-                       "else run nandboot; " \
-                       "fi; " \
-               "fi; " \
-       "else run nandboot; fi"
+       "if mmc init && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
+                       "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
+               "source ${loadaddr}; " \
+       "fi; " \
+       "ubi part boot && ubifsmount boot && ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
 
 #define CONFIG_AUTO_COMPLETE   1
 /*
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 
 #define CONFIG_ENV_IS_IN_NAND          1
-#define SMNAND_ENV_OFFSET              0x240000 /* environment starts here */
+#define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
 
 #define CONFIG_SYS_ENV_SECT_SIZE       boot_flash_sec
 #define CONFIG_ENV_OFFSET              boot_flash_off