return i2c_sw_status != DC_I2C_STATUS__DC_I2C_STATUS_IDLE;
}
-static void set_speed_hw_dce80(
- struct dce_i2c_hw *dce_i2c_hw,
- uint32_t speed)
-{
-
- if (speed) {
- REG_UPDATE_N(SPEED, 2,
- FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_PRESCALE), dce_i2c_hw->reference_frequency / speed,
- FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2);
- }
-}
-static void set_speed_hw_dce100(
+static void set_speed(
struct dce_i2c_hw *dce_i2c_hw,
uint32_t speed)
{
FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2);
}
}
+
bool dce_i2c_hw_engine_acquire_engine(
struct dce_i2c_hw *dce_i2c_hw,
struct ddc *ddc)
return NULL;
}
-static bool setup_engine_hw_dce100(
+static bool setup_engine(
struct dce_i2c_hw *dce_i2c_hw)
{
uint32_t i2c_setup_limit = I2C_SETUP_TIME_LIMIT_DCE;
return true;
}
-static bool setup_engine_hw_dce80(
- struct dce_i2c_hw *dce_i2c_hw)
-{
-
- /* Program pin select */
- {
- REG_UPDATE_6(DC_I2C_CONTROL,
- DC_I2C_GO, 0,
- DC_I2C_SOFT_RESET, 0,
- DC_I2C_SEND_RESET, 0,
- DC_I2C_SW_STATUS_RESET, 1,
- DC_I2C_TRANSACTION_COUNT, 0,
- DC_I2C_DDC_SELECT, dce_i2c_hw->engine_id);
- }
-
- /* Program time limit */
- {
- REG_UPDATE_2(SETUP,
- DC_I2C_DDC1_TIME_LIMIT, I2C_SETUP_TIME_LIMIT_DCE,
- DC_I2C_DDC1_ENABLE, 1);
- }
-
- /* Program HW priority
- * set to High - interrupt software I2C at any time
- * Enable restart of SW I2C that was interrupted by HW
- * disable queuing of software while I2C is in use by HW
- */
- {
- REG_UPDATE_2(DC_I2C_ARBITRATION,
- DC_I2C_NO_QUEUED_SW_GO, 0,
- DC_I2C_SW_PRIORITY, DC_I2C_ARBITRATION__DC_I2C_SW_PRIORITY_NORMAL);
- }
- return true;
-}
-static void process_channel_reply_hw_dce80(
- struct dce_i2c_hw *dce_i2c_hw,
- struct i2c_reply_transaction_data *reply)
-{
- uint32_t length = reply->length;
- uint8_t *buffer = reply->data;
-
- REG_SET_3(DC_I2C_DATA, 0,
- DC_I2C_INDEX, length - 1,
- DC_I2C_DATA_RW, 1,
- DC_I2C_INDEX_WRITE, 1);
-
- while (length) {
- /* after reading the status,
- * if the I2C operation executed successfully
- * (i.e. DC_I2C_STATUS_DONE = 1) then the I2C controller
- * should read data bytes from I2C circular data buffer
- */
-
- uint32_t i2c_data;
-
- REG_GET(DC_I2C_DATA, DC_I2C_DATA, &i2c_data);
- *buffer++ = i2c_data;
-
- --length;
- }
-}
-static void process_channel_reply_hw_dce100(
+static void process_channel_reply(
struct dce_i2c_hw *dce_i2c_hw,
struct i2c_reply_transaction_data *reply)
{
dce_i2c_hw->transaction_count = 0;
dce_i2c_hw->buffer_used_bytes = 0;
}
-static bool process_transaction_hw_dce80(
+static bool process_transaction(
struct dce_i2c_hw *dce_i2c_hw,
struct i2c_request_transaction_data *request)
{
bool last_transaction = false;
uint32_t value = 0;
- {
-
- last_transaction = ((dce_i2c_hw->transaction_count == 3) ||
- (request->action == DCE_I2C_TRANSACTION_ACTION_I2C_WRITE) ||
- (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ));
+ last_transaction = ((dce_i2c_hw->transaction_count == 3) ||
+ (request->action == DCE_I2C_TRANSACTION_ACTION_I2C_WRITE) ||
+ (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ));
- switch (dce_i2c_hw->transaction_count) {
- case 0:
- REG_UPDATE_5(DC_I2C_TRANSACTION0,
- DC_I2C_STOP_ON_NACK0, 1,
- DC_I2C_START0, 1,
- DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
- DC_I2C_COUNT0, length,
- DC_I2C_STOP0, last_transaction ? 1 : 0);
- break;
- case 1:
- REG_UPDATE_5(DC_I2C_TRANSACTION1,
- DC_I2C_STOP_ON_NACK0, 1,
- DC_I2C_START0, 1,
- DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
- DC_I2C_COUNT0, length,
- DC_I2C_STOP0, last_transaction ? 1 : 0);
- break;
- case 2:
- REG_UPDATE_5(DC_I2C_TRANSACTION2,
- DC_I2C_STOP_ON_NACK0, 1,
- DC_I2C_START0, 1,
- DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
- DC_I2C_COUNT0, length,
- DC_I2C_STOP0, last_transaction ? 1 : 0);
- break;
- case 3:
- REG_UPDATE_5(DC_I2C_TRANSACTION3,
- DC_I2C_STOP_ON_NACK0, 1,
- DC_I2C_START0, 1,
- DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
- DC_I2C_COUNT0, length,
- DC_I2C_STOP0, last_transaction ? 1 : 0);
- break;
- default:
- /* TODO Warning ? */
- break;
- }
- }
-
- /* Write the I2C address and I2C data
- * into the hardware circular buffer, one byte per entry.
- * As an example, the 7-bit I2C slave address for CRT monitor
- * for reading DDC/EDID information is 0b1010001.
- * For an I2C send operation, the LSB must be programmed to 0;
- * for I2C receive operation, the LSB must be programmed to 1.
- */
-
- {
- if (dce_i2c_hw->transaction_count == 0) {
- value = REG_SET_4(DC_I2C_DATA, 0,
- DC_I2C_DATA_RW, false,
- DC_I2C_DATA, request->address,
- DC_I2C_INDEX, 0,
- DC_I2C_INDEX_WRITE, 1);
- } else
- value = REG_SET_2(DC_I2C_DATA, 0,
- DC_I2C_DATA_RW, false,
- DC_I2C_DATA, request->address);
-
- if (!(request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ)) {
-
- while (length) {
- REG_SET_2(DC_I2C_DATA, value,
- DC_I2C_INDEX_WRITE, 0,
- DC_I2C_DATA, *buffer++);
- --length;
- }
- }
- }
-
- ++dce_i2c_hw->transaction_count;
- dce_i2c_hw->buffer_used_bytes += length + 1;
-
- return last_transaction;
-}
-
-#define STOP_TRANS_PREDICAT \
- ((dce_i2c_hw->transaction_count == 3) || \
- (request->action == DCE_I2C_TRANSACTION_ACTION_I2C_WRITE) || \
- (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ))
-
-#define SET_I2C_TRANSACTION(id) \
- do { \
- REG_UPDATE_N(DC_I2C_TRANSACTION##id, 5, \
- FN(DC_I2C_TRANSACTION0, DC_I2C_STOP_ON_NACK0), 1, \
- FN(DC_I2C_TRANSACTION0, DC_I2C_START0), 1, \
- FN(DC_I2C_TRANSACTION0, DC_I2C_STOP0), STOP_TRANS_PREDICAT ? 1:0, \
- FN(DC_I2C_TRANSACTION0, DC_I2C_RW0), (0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ)), \
- FN(DC_I2C_TRANSACTION0, DC_I2C_COUNT0), length); \
- if (STOP_TRANS_PREDICAT) \
- last_transaction = true; \
- } while (false)
-
-static bool process_transaction_hw_dce100(
- struct dce_i2c_hw *dce_i2c_hw,
- struct i2c_request_transaction_data *request)
-{
- uint32_t length = request->length;
- uint8_t *buffer = request->data;
- uint32_t value = 0;
-
- bool last_transaction = false;
-
switch (dce_i2c_hw->transaction_count) {
case 0:
- SET_I2C_TRANSACTION(0);
+ REG_UPDATE_5(DC_I2C_TRANSACTION0,
+ DC_I2C_STOP_ON_NACK0, 1,
+ DC_I2C_START0, 1,
+ DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
+ DC_I2C_COUNT0, length,
+ DC_I2C_STOP0, last_transaction ? 1 : 0);
break;
case 1:
- SET_I2C_TRANSACTION(1);
+ REG_UPDATE_5(DC_I2C_TRANSACTION1,
+ DC_I2C_STOP_ON_NACK0, 1,
+ DC_I2C_START0, 1,
+ DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
+ DC_I2C_COUNT0, length,
+ DC_I2C_STOP0, last_transaction ? 1 : 0);
break;
case 2:
- SET_I2C_TRANSACTION(2);
+ REG_UPDATE_5(DC_I2C_TRANSACTION2,
+ DC_I2C_STOP_ON_NACK0, 1,
+ DC_I2C_START0, 1,
+ DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
+ DC_I2C_COUNT0, length,
+ DC_I2C_STOP0, last_transaction ? 1 : 0);
break;
case 3:
- SET_I2C_TRANSACTION(3);
+ REG_UPDATE_5(DC_I2C_TRANSACTION3,
+ DC_I2C_STOP_ON_NACK0, 1,
+ DC_I2C_START0, 1,
+ DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
+ DC_I2C_COUNT0, length,
+ DC_I2C_STOP0, last_transaction ? 1 : 0);
break;
default:
/* TODO Warning ? */
break;
}
-
/* Write the I2C address and I2C data
* into the hardware circular buffer, one byte per entry.
* As an example, the 7-bit I2C slave address for CRT monitor
return result;
}
static const struct dce_i2c_hw_funcs dce100_i2c_hw_funcs = {
- .setup_engine = setup_engine_hw_dce100,
- .set_speed = set_speed_hw_dce100,
+ .setup_engine = setup_engine,
+ .set_speed = set_speed,
.get_speed = get_speed_hw,
.release_engine = release_engine_hw,
- .process_transaction = process_transaction_hw_dce100,
- .process_channel_reply = process_channel_reply_hw_dce100,
+ .process_transaction = process_transaction,
+ .process_channel_reply = process_channel_reply,
.is_hw_busy = is_hw_busy,
.get_channel_status = get_channel_status_hw,
.execute_transaction = execute_transaction_hw,
.disable_i2c_hw_engine = disable_i2c_hw_engine
};
static const struct dce_i2c_hw_funcs dce80_i2c_hw_funcs = {
- .setup_engine = setup_engine_hw_dce80,
- .set_speed = set_speed_hw_dce80,
+ .setup_engine = setup_engine,
+ .set_speed = set_speed,
.get_speed = get_speed_hw,
.release_engine = release_engine_hw,
- .process_transaction = process_transaction_hw_dce80,
- .process_channel_reply = process_channel_reply_hw_dce80,
+ .process_transaction = process_transaction,
+ .process_channel_reply = process_channel_reply,
.is_hw_busy = is_hw_busy,
.get_channel_status = get_channel_status_hw,
.execute_transaction = execute_transaction_hw,
projects / platform / kernel / linux-rpi.git / commitdiff