+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Hardware specific definitions for SL-Cx000 series of PDAs
- *
- * Copyright (c) 2005 Alexander Wykes
- * Copyright (c) 2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- */
-#ifndef __ASM_ARCH_SPITZ_H
-#define __ASM_ARCH_SPITZ_H 1
-#endif
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */
-#include <linux/fb.h>
-
-/* Spitz/Akita GPIOs */
-
-#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */
-#define SPITZ_GPIO_RESET (1)
-#define SPITZ_GPIO_nSD_DETECT (9)
-#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */
-#define SPITZ_GPIO_AK_INT (13) /* Remote Control */
-#define SPITZ_GPIO_ADS7846_CS (14)
-#define SPITZ_GPIO_SYNC (16)
-#define SPITZ_GPIO_MAX1111_CS (20)
-#define SPITZ_GPIO_FATAL_BAT (21)
-#define SPITZ_GPIO_HSYNC (22)
-#define SPITZ_GPIO_nSD_CLK (32)
-#define SPITZ_GPIO_USB_DEVICE (35)
-#define SPITZ_GPIO_USB_HOST (37)
-#define SPITZ_GPIO_USB_CONNECT (41)
-#define SPITZ_GPIO_LCDCON_CS (53)
-#define SPITZ_GPIO_nPCE (54)
-#define SPITZ_GPIO_nSD_WP (81)
-#define SPITZ_GPIO_ON_RESET (89)
-#define SPITZ_GPIO_BAT_COVER (90)
-#define SPITZ_GPIO_CF_CD (94)
-#define SPITZ_GPIO_ON_KEY (95)
-#define SPITZ_GPIO_SWA (97)
-#define SPITZ_GPIO_SWB (96)
-#define SPITZ_GPIO_CHRG_FULL (101)
-#define SPITZ_GPIO_CO (101)
-#define SPITZ_GPIO_CF_IRQ (105)
-#define SPITZ_GPIO_AC_IN (115)
-#define SPITZ_GPIO_HP_IN (116)
-
-/* Spitz Only GPIOs */
-
-#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */
-#define SPITZ_GPIO_CF2_CD (93)
-
-
-/* Spitz/Akita Keyboard Definitions */
-
-#define SPITZ_KEY_STROBE_NUM (11)
-#define SPITZ_KEY_SENSE_NUM (7)
-#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000
-#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000
-#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000
-#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880
-#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000
-#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4
-#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000
-#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000
-
-#define SPITZ_GPIO_KEY_STROBE0 88
-#define SPITZ_GPIO_KEY_STROBE1 23
-#define SPITZ_GPIO_KEY_STROBE2 24
-#define SPITZ_GPIO_KEY_STROBE3 25
-#define SPITZ_GPIO_KEY_STROBE4 26
-#define SPITZ_GPIO_KEY_STROBE5 27
-#define SPITZ_GPIO_KEY_STROBE6 52
-#define SPITZ_GPIO_KEY_STROBE7 103
-#define SPITZ_GPIO_KEY_STROBE8 107
-#define SPITZ_GPIO_KEY_STROBE9 108
-#define SPITZ_GPIO_KEY_STROBE10 114
-
-#define SPITZ_GPIO_KEY_SENSE0 12
-#define SPITZ_GPIO_KEY_SENSE1 17
-#define SPITZ_GPIO_KEY_SENSE2 91
-#define SPITZ_GPIO_KEY_SENSE3 34
-#define SPITZ_GPIO_KEY_SENSE4 36
-#define SPITZ_GPIO_KEY_SENSE5 38
-#define SPITZ_GPIO_KEY_SENSE6 39
-
-
-/* Spitz Scoop Device (No. 1) GPIOs */
-/* Suspend States in comments */
-#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */
-#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */
-#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */
-#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */
-#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */
-#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */
-#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */
-#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */
-#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */
-
-#define SPITZ_SCP_IO_DIR (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
- SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
- SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
-#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-#define SPITZ_SCP_SUS_SET 0
-
-#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
-#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0)
-#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1)
-#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2)
-#define SPITZ_GPIO_MUTE_L (SPITZ_SCP_GPIO_BASE + 3)
-#define SPITZ_GPIO_MUTE_R (SPITZ_SCP_GPIO_BASE + 4)
-#define SPITZ_GPIO_CF_POWER (SPITZ_SCP_GPIO_BASE + 5)
-#define SPITZ_GPIO_LED_ORANGE (SPITZ_SCP_GPIO_BASE + 6)
-#define SPITZ_GPIO_JK_A (SPITZ_SCP_GPIO_BASE + 7)
-#define SPITZ_GPIO_ADC_TEMP_ON (SPITZ_SCP_GPIO_BASE + 8)
-
-/* Spitz Scoop Device (No. 2) GPIOs */
-/* Suspend States in comments */
-#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */
-#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */
-#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */
-#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */
-#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */
-#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */
-#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */
-#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */
-#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */
-
-#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
- SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
- SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-
-#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
-#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
- SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
-
-#define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
-#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0)
-#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1)
-#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2)
-#define SPITZ_GPIO_RESERVED_2 (SPITZ_SCP2_GPIO_BASE + 3)
-#define SPITZ_GPIO_RESERVED_3 (SPITZ_SCP2_GPIO_BASE + 4)
-#define SPITZ_GPIO_RESERVED_4 (SPITZ_SCP2_GPIO_BASE + 5)
-#define SPITZ_GPIO_BACKLIGHT_CONT (SPITZ_SCP2_GPIO_BASE + 6)
-#define SPITZ_GPIO_BACKLIGHT_ON (SPITZ_SCP2_GPIO_BASE + 7)
-#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8)
-
-/* Akita IO Expander GPIOs */
-#define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
-#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0)
-#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1)
-#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2)
-#define AKITA_GPIO_BACKLIGHT_ON (AKITA_IOEXP_GPIO_BASE + 3)
-#define AKITA_GPIO_BACKLIGHT_CONT (AKITA_IOEXP_GPIO_BASE + 4)
-#define AKITA_GPIO_AKIN_PULLUP (AKITA_IOEXP_GPIO_BASE + 5)
-#define AKITA_GPIO_IR_ON (AKITA_IOEXP_GPIO_BASE + 6)
-#define AKITA_GPIO_RESERVED_7 (AKITA_IOEXP_GPIO_BASE + 7)
-
-/* Spitz IRQ Definitions */
-
-#define SPITZ_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT)
-#define SPITZ_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN)
-#define SPITZ_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT)
-#define SPITZ_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN)
-#define SPITZ_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT)
-#define SPITZ_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC)
-#define SPITZ_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY)
-#define SPITZ_IRQ_GPIO_SWA PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA)
-#define SPITZ_IRQ_GPIO_SWB PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB)
-#define SPITZ_IRQ_GPIO_BAT_COVER PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER)
-#define SPITZ_IRQ_GPIO_FATAL_BAT PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT)
-#define SPITZ_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO)
-#define SPITZ_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ)
-#define SPITZ_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD)
-#define SPITZ_IRQ_GPIO_CF2_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ)
-#define SPITZ_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT)
-#define SPITZ_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT)
-
-/*
- * Shared data structures
- */
-extern struct platform_device spitzssp_device;
-extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/video-pxafb.h>
-#include <mach/spitz.h>
+#include "spitz.h"
#include "sharpsl_pm.h"
#include <mach/smemc.h>
static inline void spitz_i2c_init(void) {}
#endif
+static struct gpiod_lookup_table spitz_audio_gpio_table = {
+ .dev_id = "spitz-audio",
+ .table = {
+ GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
+ "mute-l", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
+ "mute-r", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
+ "mic", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table akita_audio_gpio_table = {
+ .dev_id = "spitz-audio",
+ .table = {
+ GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
+ "mute-l", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
+ "mute-r", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
+ "mic", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/******************************************************************************
* Audio devices
******************************************************************************/
static inline void spitz_audio_init(void)
{
+ if (machine_is_akita())
+ gpiod_add_lookup_table(&akita_audio_gpio_table);
+ else
+ gpiod_add_lookup_table(&spitz_audio_gpio_table);
+
platform_device_register_simple("spitz-audio", -1, NULL, 0);
}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Hardware specific definitions for SL-Cx000 series of PDAs
+ *
+ * Copyright (c) 2005 Alexander Wykes
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ */
+#ifndef __ASM_ARCH_SPITZ_H
+#define __ASM_ARCH_SPITZ_H 1
+#endif
+
+#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */
+#include <linux/fb.h>
+
+/* Spitz/Akita GPIOs */
+
+#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */
+#define SPITZ_GPIO_RESET (1)
+#define SPITZ_GPIO_nSD_DETECT (9)
+#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */
+#define SPITZ_GPIO_AK_INT (13) /* Remote Control */
+#define SPITZ_GPIO_ADS7846_CS (14)
+#define SPITZ_GPIO_SYNC (16)
+#define SPITZ_GPIO_MAX1111_CS (20)
+#define SPITZ_GPIO_FATAL_BAT (21)
+#define SPITZ_GPIO_HSYNC (22)
+#define SPITZ_GPIO_nSD_CLK (32)
+#define SPITZ_GPIO_USB_DEVICE (35)
+#define SPITZ_GPIO_USB_HOST (37)
+#define SPITZ_GPIO_USB_CONNECT (41)
+#define SPITZ_GPIO_LCDCON_CS (53)
+#define SPITZ_GPIO_nPCE (54)
+#define SPITZ_GPIO_nSD_WP (81)
+#define SPITZ_GPIO_ON_RESET (89)
+#define SPITZ_GPIO_BAT_COVER (90)
+#define SPITZ_GPIO_CF_CD (94)
+#define SPITZ_GPIO_ON_KEY (95)
+#define SPITZ_GPIO_SWA (97)
+#define SPITZ_GPIO_SWB (96)
+#define SPITZ_GPIO_CHRG_FULL (101)
+#define SPITZ_GPIO_CO (101)
+#define SPITZ_GPIO_CF_IRQ (105)
+#define SPITZ_GPIO_AC_IN (115)
+#define SPITZ_GPIO_HP_IN (116)
+
+/* Spitz Only GPIOs */
+
+#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */
+#define SPITZ_GPIO_CF2_CD (93)
+
+
+/* Spitz/Akita Keyboard Definitions */
+
+#define SPITZ_KEY_STROBE_NUM (11)
+#define SPITZ_KEY_SENSE_NUM (7)
+#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000
+#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000
+#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000
+#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880
+#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000
+#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4
+#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000
+#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000
+
+#define SPITZ_GPIO_KEY_STROBE0 88
+#define SPITZ_GPIO_KEY_STROBE1 23
+#define SPITZ_GPIO_KEY_STROBE2 24
+#define SPITZ_GPIO_KEY_STROBE3 25
+#define SPITZ_GPIO_KEY_STROBE4 26
+#define SPITZ_GPIO_KEY_STROBE5 27
+#define SPITZ_GPIO_KEY_STROBE6 52
+#define SPITZ_GPIO_KEY_STROBE7 103
+#define SPITZ_GPIO_KEY_STROBE8 107
+#define SPITZ_GPIO_KEY_STROBE9 108
+#define SPITZ_GPIO_KEY_STROBE10 114
+
+#define SPITZ_GPIO_KEY_SENSE0 12
+#define SPITZ_GPIO_KEY_SENSE1 17
+#define SPITZ_GPIO_KEY_SENSE2 91
+#define SPITZ_GPIO_KEY_SENSE3 34
+#define SPITZ_GPIO_KEY_SENSE4 36
+#define SPITZ_GPIO_KEY_SENSE5 38
+#define SPITZ_GPIO_KEY_SENSE6 39
+
+
+/* Spitz Scoop Device (No. 1) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */
+#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */
+#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */
+#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */
+#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */
+#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */
+#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */
+#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */
+#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */
+
+#define SPITZ_SCP_IO_DIR (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+ SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
+ SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
+#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_SUS_SET 0
+
+#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
+#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0)
+#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1)
+#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2)
+#define SPITZ_GPIO_MUTE_L (SPITZ_SCP_GPIO_BASE + 3)
+#define SPITZ_GPIO_MUTE_R (SPITZ_SCP_GPIO_BASE + 4)
+#define SPITZ_GPIO_CF_POWER (SPITZ_SCP_GPIO_BASE + 5)
+#define SPITZ_GPIO_LED_ORANGE (SPITZ_SCP_GPIO_BASE + 6)
+#define SPITZ_GPIO_JK_A (SPITZ_SCP_GPIO_BASE + 7)
+#define SPITZ_GPIO_ADC_TEMP_ON (SPITZ_SCP_GPIO_BASE + 8)
+
+/* Spitz Scoop Device (No. 2) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */
+#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */
+#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */
+#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */
+#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */
+#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */
+#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */
+#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */
+#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */
+
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+ SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+
+#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+
+#define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
+#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0)
+#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1)
+#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2)
+#define SPITZ_GPIO_RESERVED_2 (SPITZ_SCP2_GPIO_BASE + 3)
+#define SPITZ_GPIO_RESERVED_3 (SPITZ_SCP2_GPIO_BASE + 4)
+#define SPITZ_GPIO_RESERVED_4 (SPITZ_SCP2_GPIO_BASE + 5)
+#define SPITZ_GPIO_BACKLIGHT_CONT (SPITZ_SCP2_GPIO_BASE + 6)
+#define SPITZ_GPIO_BACKLIGHT_ON (SPITZ_SCP2_GPIO_BASE + 7)
+#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8)
+
+/* Akita IO Expander GPIOs */
+#define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
+#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0)
+#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1)
+#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2)
+#define AKITA_GPIO_BACKLIGHT_ON (AKITA_IOEXP_GPIO_BASE + 3)
+#define AKITA_GPIO_BACKLIGHT_CONT (AKITA_IOEXP_GPIO_BASE + 4)
+#define AKITA_GPIO_AKIN_PULLUP (AKITA_IOEXP_GPIO_BASE + 5)
+#define AKITA_GPIO_IR_ON (AKITA_IOEXP_GPIO_BASE + 6)
+#define AKITA_GPIO_RESERVED_7 (AKITA_IOEXP_GPIO_BASE + 7)
+
+/* Spitz IRQ Definitions */
+
+#define SPITZ_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT)
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device spitzssp_device;
+extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/spitz.h>
+#include "spitz.h"
#include "pxa27x.h"
#include "sharpsl_pm.h"
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/spitz.h>
#include "../codecs/wm8750.h"
#include "pxa2xx-i2s.h"
static int spitz_jack_func;
static int spitz_spk_func;
-static int spitz_mic_gpio;
+static struct gpio_desc *gpiod_mic, *gpiod_mute_l, *gpiod_mute_r;
static void spitz_ext_control(struct snd_soc_dapm_context *dapm)
{
snd_soc_dapm_disable_pin_unlocked(dapm, "Mic Jack");
snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack");
snd_soc_dapm_enable_pin_unlocked(dapm, "Headphone Jack");
- gpio_set_value(SPITZ_GPIO_MUTE_L, 1);
- gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
+ gpiod_set_value(gpiod_mute_l, 1);
+ gpiod_set_value(gpiod_mute_r, 1);
break;
case SPITZ_MIC:
/* enable mic jack and bias, mute hp */
snd_soc_dapm_disable_pin_unlocked(dapm, "Headset Jack");
snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack");
snd_soc_dapm_enable_pin_unlocked(dapm, "Mic Jack");
- gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
- gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
+ gpiod_set_value(gpiod_mute_l, 0);
+ gpiod_set_value(gpiod_mute_r, 0);
break;
case SPITZ_LINE:
/* enable line jack, disable mic bias and mute hp */
snd_soc_dapm_disable_pin_unlocked(dapm, "Headset Jack");
snd_soc_dapm_disable_pin_unlocked(dapm, "Mic Jack");
snd_soc_dapm_enable_pin_unlocked(dapm, "Line Jack");
- gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
- gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
+ gpiod_set_value(gpiod_mute_l, 0);
+ gpiod_set_value(gpiod_mute_r, 0);
break;
case SPITZ_HEADSET:
/* enable and unmute headset jack enable mic bias, mute L hp */
snd_soc_dapm_enable_pin_unlocked(dapm, "Mic Jack");
snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack");
snd_soc_dapm_enable_pin_unlocked(dapm, "Headset Jack");
- gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
- gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
+ gpiod_set_value(gpiod_mute_l, 0);
+ gpiod_set_value(gpiod_mute_r, 1);
break;
case SPITZ_HP_OFF:
snd_soc_dapm_disable_pin_unlocked(dapm, "Headset Jack");
snd_soc_dapm_disable_pin_unlocked(dapm, "Mic Jack");
snd_soc_dapm_disable_pin_unlocked(dapm, "Line Jack");
- gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
- gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
+ gpiod_set_value(gpiod_mute_l, 0);
+ gpiod_set_value(gpiod_mute_r, 0);
break;
}
static int spitz_mic_bias(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- gpio_set_value_cansleep(spitz_mic_gpio, SND_SOC_DAPM_EVENT_ON(event));
+ gpiod_set_value_cansleep(gpiod_mic, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
struct snd_soc_card *card = &snd_soc_spitz;
int ret;
- if (machine_is_akita())
- spitz_mic_gpio = AKITA_GPIO_MIC_BIAS;
- else
- spitz_mic_gpio = SPITZ_GPIO_MIC_BIAS;
-
- ret = gpio_request(spitz_mic_gpio, "MIC GPIO");
- if (ret)
- goto err1;
-
- ret = gpio_direction_output(spitz_mic_gpio, 0);
- if (ret)
- goto err2;
+ gpiod_mic = devm_gpiod_get(&pdev->dev, "mic", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod_mic))
+ return PTR_ERR(gpiod_mic);
+ gpiod_mute_l = devm_gpiod_get(&pdev->dev, "mute-l", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod_mute_l))
+ return PTR_ERR(gpiod_mute_l);
+ gpiod_mute_r = devm_gpiod_get(&pdev->dev, "mute-r", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod_mute_r))
+ return PTR_ERR(gpiod_mute_r);
card->dev = &pdev->dev;
ret = devm_snd_soc_register_card(&pdev->dev, card);
- if (ret) {
+ if (ret)
dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
ret);
- goto err2;
- }
-
- return 0;
-err2:
- gpio_free(spitz_mic_gpio);
-err1:
return ret;
}
static int spitz_remove(struct platform_device *pdev)
{
- gpio_free(spitz_mic_gpio);
return 0;
}
projects / platform / kernel / linux-starfive.git / commitdiff