smc911x irq sense request and MPR2 board support

Hi,

this are the changes to the smc911x driver, which were necessary
to get it running on the Magic Panel R2 (smsc9115).
It is a SH3-DSP based board. The other patches are available on
the linuxsh-dev mailinglist.
http://marc.info/?l=linuxsh-dev&r=1&b=200708&w=2

It was necessary to set the irq sense to low level.
Therefor the SMC_IRQ_SENSE define was added.
How are the chances for inclusion in 2.6.24?

Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 45f6cf5..0e48b29 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -944,7 +944,7 @@ config SMC911X
        tristate "SMSC LAN911[5678] support"
        select CRC32
        select MII
-       depends on ARCH_PXA
+       depends on ARCH_PXA || SUPERH
        help
          This is a driver for SMSC's LAN911x series of Ethernet chipsets
          including the new LAN9115, LAN9116, LAN9117, and LAN9118.

diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index c0276c0..7c60df4 100644 (file)
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -2063,7 +2063,7 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr)
 
        /* Grab the IRQ */
        retval = request_irq(dev->irq, &smc911x_interrupt,
-                       IRQF_SHARED | IRQF_TRIGGER_FALLING, dev->name, dev);
+                       IRQF_SHARED | SMC_IRQ_SENSE, dev->name, dev);
        if (retval)
                goto err_out;
 

diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 962a710..16a0edc 100644 (file)
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -36,6 +36,12 @@
   #define SMC_USE_PXA_DMA      1
   #define SMC_USE_16BIT                0
   #define SMC_USE_32BIT                1
+  #define SMC_IRQ_SENSE                IRQF_TRIGGER_FALLING
+#elif CONFIG_SH_MAGIC_PANEL_R2
+  #define SMC_USE_SH_DMA       0
+  #define SMC_USE_16BIT                0
+  #define SMC_USE_32BIT                1
+  #define SMC_IRQ_SENSE                IRQF_TRIGGER_LOW
 #endif