phy-rcar-usb: correct base address

The memory region that is used by the driver overlaps EHCI and OHCI  register
regions for absolutely no reason now  -- fix it  by adding offset of 0x800 to
the base address, changing the register #define's accordingly. This has extra
positive effect that we now can use devm_ioremap_resource()...

Note that the driver and the SoC code have to be in one patch to keep the code
bisectable...

The patch has been tested on the Marzen board.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index a6406cd..a00283f 100644 (file)
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -391,7 +391,7 @@ static struct platform_device sata_device = {
 /* USB PHY */
 static struct resource usb_phy_resources[] = {
        [0] = {
-               .start          = 0xffe70000,
+               .start          = 0xffe70800,
                .end            = 0xffe70900 - 1,
                .flags          = IORESOURCE_MEM,
        },

diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c
index 4893dbd..d636cc7 100644 (file)
--- a/drivers/usb/phy/phy-rcar-usb.c
+++ b/drivers/usb/phy/phy-rcar-usb.c
@@ -16,13 +16,13 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 
-/* USBH common register */
-#define USBPCTRL0      0x0800
-#define USBPCTRL1      0x0804
-#define USBST          0x0808
-#define USBEH0         0x080C
-#define USBOH0         0x081C
-#define USBCTL0                0x0858
+/* REGS block */
+#define USBPCTRL0      0x00
+#define USBPCTRL1      0x04
+#define USBST          0x08
+#define USBEH0         0x0C
+#define USBOH0         0x1C
+#define USBCTL0                0x58
 
 /* USBPCTRL1 */
 #define PHY_RST                (1 << 2)
@@ -139,17 +139,9 @@ static int rcar_usb_phy_probe(struct platform_device *pdev)
                return -EINVAL;
        }
 
-       /*
-        * CAUTION
-        *
-        * Because this phy address is also mapped under OHCI/EHCI address area,
-        * this driver can't use devm_request_and_ioremap(dev, res) here
-        */
-       reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0));
-       if (!reg0) {
-               dev_err(dev, "ioremap error\n");
-               return -ENOMEM;
-       }
+       reg0 = devm_ioremap_resource(dev, res0);
+       if (IS_ERR(reg0))
+               return PTR_ERR(reg0);
 
        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
        if (!priv) {