--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for clk rate management
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+/* Needed for clk_hw_get_clk() */
+#include "clk.h"
+
+#include <kunit/test.h>
+
+#define DUMMY_CLOCK_INIT_RATE (42 * 1000 * 1000)
+#define DUMMY_CLOCK_RATE_1 (142 * 1000 * 1000)
+#define DUMMY_CLOCK_RATE_2 (242 * 1000 * 1000)
+
+struct clk_dummy_context {
+ struct clk_hw hw;
+ unsigned long rate;
+};
+
+static unsigned long clk_dummy_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_dummy_context *ctx =
+ container_of(hw, struct clk_dummy_context, hw);
+
+ return ctx->rate;
+}
+
+static int clk_dummy_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ /* Just return the same rate without modifying it */
+ return 0;
+}
+
+static int clk_dummy_maximize_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ /*
+ * If there's a maximum set, always run the clock at the maximum
+ * allowed.
+ */
+ if (req->max_rate < ULONG_MAX)
+ req->rate = req->max_rate;
+
+ return 0;
+}
+
+static int clk_dummy_minimize_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ /*
+ * If there's a minimum set, always run the clock at the minimum
+ * allowed.
+ */
+ if (req->min_rate > 0)
+ req->rate = req->min_rate;
+
+ return 0;
+}
+
+static int clk_dummy_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_dummy_context *ctx =
+ container_of(hw, struct clk_dummy_context, hw);
+
+ ctx->rate = rate;
+ return 0;
+}
+
+static const struct clk_ops clk_dummy_rate_ops = {
+ .recalc_rate = clk_dummy_recalc_rate,
+ .determine_rate = clk_dummy_determine_rate,
+ .set_rate = clk_dummy_set_rate,
+};
+
+static const struct clk_ops clk_dummy_maximize_rate_ops = {
+ .recalc_rate = clk_dummy_recalc_rate,
+ .determine_rate = clk_dummy_maximize_rate,
+ .set_rate = clk_dummy_set_rate,
+};
+
+static const struct clk_ops clk_dummy_minimize_rate_ops = {
+ .recalc_rate = clk_dummy_recalc_rate,
+ .determine_rate = clk_dummy_minimize_rate,
+ .set_rate = clk_dummy_set_rate,
+};
+
+static int clk_test_init_with_ops(struct kunit *test, const struct clk_ops *ops)
+{
+ struct clk_dummy_context *ctx;
+ struct clk_init_data init = { };
+ int ret;
+
+ ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+ ctx->rate = DUMMY_CLOCK_INIT_RATE;
+ test->priv = ctx;
+
+ init.name = "test_dummy_rate";
+ init.ops = ops;
+ ctx->hw.init = &init;
+
+ ret = clk_hw_register(NULL, &ctx->hw);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int clk_test_init(struct kunit *test)
+{
+ return clk_test_init_with_ops(test, &clk_dummy_rate_ops);
+}
+
+static int clk_maximize_test_init(struct kunit *test)
+{
+ return clk_test_init_with_ops(test, &clk_dummy_maximize_rate_ops);
+}
+
+static int clk_minimize_test_init(struct kunit *test)
+{
+ return clk_test_init_with_ops(test, &clk_dummy_minimize_rate_ops);
+}
+
+static void clk_test_exit(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+
+ clk_hw_unregister(&ctx->hw);
+}
+
+/*
+ * Test that the actual rate matches what is returned by clk_get_rate()
+ */
+static void clk_test_get_rate(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, ctx->rate);
+}
+
+/*
+ * Test that, after a call to clk_set_rate(), the rate returned by
+ * clk_get_rate() matches.
+ *
+ * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
+ * modify the requested rate, which is our case in clk_dummy_rate_ops.
+ */
+static void clk_test_set_get_rate(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+}
+
+/*
+ * Test that, after several calls to clk_set_rate(), the rate returned
+ * by clk_get_rate() matches the last one.
+ *
+ * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
+ * modify the requested rate, which is our case in clk_dummy_rate_ops.
+ */
+static void clk_test_set_set_get_rate(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
+ 0);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+}
+
+/*
+ * Test that clk_round_rate and clk_set_rate are consitent and will
+ * return the same frequency.
+ */
+static void clk_test_round_set_get_rate(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rounded_rate, set_rate;
+
+ rounded_rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1);
+ KUNIT_ASSERT_GT(test, rounded_rate, 0);
+ KUNIT_EXPECT_EQ(test, rounded_rate, DUMMY_CLOCK_RATE_1);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
+ 0);
+
+ set_rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, set_rate, 0);
+ KUNIT_EXPECT_EQ(test, rounded_rate, set_rate);
+}
+
+static struct kunit_case clk_test_cases[] = {
+ KUNIT_CASE(clk_test_get_rate),
+ KUNIT_CASE(clk_test_set_get_rate),
+ KUNIT_CASE(clk_test_set_set_get_rate),
+ KUNIT_CASE(clk_test_round_set_get_rate),
+ {}
+};
+
+static struct kunit_suite clk_test_suite = {
+ .name = "clk-test",
+ .init = clk_test_init,
+ .exit = clk_test_exit,
+ .test_cases = clk_test_cases,
+};
+
+/*
+ * Test that clk_set_rate_range won't return an error for a valid range
+ * and that it will make sure the rate of the clock is within the
+ * boundaries.
+ */
+static void clk_range_test_set_range(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
+ KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
+}
+
+/*
+ * Test that calling clk_set_rate_range with a minimum rate higher than
+ * the maximum rate returns an error.
+ */
+static void clk_range_test_set_range_invalid(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+
+ KUNIT_EXPECT_LT(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1 + 1000,
+ DUMMY_CLOCK_RATE_1),
+ 0);
+}
+
+/*
+ * Test that users can't set multiple, disjoints, range that would be
+ * impossible to meet.
+ */
+static void clk_range_test_multiple_disjoints_range(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *user1, *user2;
+
+ user1 = clk_hw_get_clk(hw, NULL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
+
+ user2 = clk_hw_get_clk(hw, NULL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(user1, 1000, 2000),
+ 0);
+
+ KUNIT_EXPECT_LT(test,
+ clk_set_rate_range(user2, 3000, 4000),
+ 0);
+
+ clk_put(user2);
+ clk_put(user1);
+}
+
+/*
+ * Test that if our clock has some boundaries and we try to round a rate
+ * lower than the minimum, the returned rate won't be affected by the
+ * boundaries.
+ */
+static void clk_range_test_set_range_round_rate_lower(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 - 1000);
+}
+
+/*
+ * Test that if our clock has some boundaries and we try to set a rate
+ * lower than the minimum, we'll get an error.
+ */
+static void clk_range_test_set_range_set_rate_lower(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ KUNIT_ASSERT_LT(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
+ 0);
+}
+
+/*
+ * Test that if our clock has some boundaries and we try to round and
+ * set a rate lower than the minimum, the values won't be consistent
+ * between clk_round_rate() and clk_set_rate().
+ */
+static void clk_range_test_set_range_set_round_rate_consistent_lower(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ long rounded;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rounded = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
+ KUNIT_ASSERT_GT(test, rounded, 0);
+
+ KUNIT_EXPECT_LT(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
+ 0);
+
+ KUNIT_EXPECT_NE(test, rounded, clk_get_rate(clk));
+}
+
+/*
+ * Test that if our clock has some boundaries and we try to round a rate
+ * higher than the maximum, the returned rate won't be affected by the
+ * boundaries.
+ */
+static void clk_range_test_set_range_round_rate_higher(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2 + 1000);
+}
+
+/*
+ * Test that if our clock has some boundaries and we try to set a rate
+ * lower than the maximum, we'll get an error.
+ */
+static void clk_range_test_set_range_set_rate_higher(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ KUNIT_ASSERT_LT(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
+ 0);
+}
+
+/*
+ * Test that if our clock has some boundaries and we try to round and
+ * set a rate higher than the maximum, the values won't be consistent
+ * between clk_round_rate() and clk_set_rate().
+ */
+static void clk_range_test_set_range_set_round_rate_consistent_higher(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ long rounded;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rounded = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
+ KUNIT_ASSERT_GT(test, rounded, 0);
+
+ KUNIT_EXPECT_LT(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
+ 0);
+
+ KUNIT_EXPECT_NE(test, rounded, clk_get_rate(clk));
+}
+
+/*
+ * Test that if our clock has a rate lower than the minimum set by a
+ * call to clk_set_rate_range(), the rate will be raised to match the
+ * new minimum.
+ *
+ * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
+ * modify the requested rate, which is our case in clk_dummy_rate_ops.
+ */
+static void clk_range_test_set_range_get_rate_raised(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
+ 0);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+}
+
+/*
+ * Test that if our clock has a rate higher than the maximum set by a
+ * call to clk_set_rate_range(), the rate will be lowered to match the
+ * new maximum.
+ *
+ * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
+ * modify the requested rate, which is our case in clk_dummy_rate_ops.
+ */
+static void clk_range_test_set_range_get_rate_lowered(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
+ 0);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+}
+
+static struct kunit_case clk_range_test_cases[] = {
+ KUNIT_CASE(clk_range_test_set_range),
+ KUNIT_CASE(clk_range_test_set_range_invalid),
+ KUNIT_CASE(clk_range_test_multiple_disjoints_range),
+ KUNIT_CASE(clk_range_test_set_range_round_rate_lower),
+ KUNIT_CASE(clk_range_test_set_range_set_rate_lower),
+ KUNIT_CASE(clk_range_test_set_range_set_round_rate_consistent_lower),
+ KUNIT_CASE(clk_range_test_set_range_round_rate_higher),
+ KUNIT_CASE(clk_range_test_set_range_set_rate_higher),
+ KUNIT_CASE(clk_range_test_set_range_set_round_rate_consistent_higher),
+ KUNIT_CASE(clk_range_test_set_range_get_rate_raised),
+ KUNIT_CASE(clk_range_test_set_range_get_rate_lowered),
+ {}
+};
+
+static struct kunit_suite clk_range_test_suite = {
+ .name = "clk-range-test",
+ .init = clk_test_init,
+ .exit = clk_test_exit,
+ .test_cases = clk_range_test_cases,
+};
+
+/*
+ * Test that if:
+ * - we have several subsequent calls to clk_set_rate_range();
+ * - and we have a round_rate ops that always return the maximum
+ * frequency allowed;
+ *
+ * The clock will run at the minimum of all maximum boundaries
+ * requested, even if those boundaries aren't there anymore.
+ */
+static void clk_range_test_set_range_rate_maximized(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
+ 0);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2 - 1000),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
+}
+
+/*
+ * Test that if:
+ * - we have several subsequent calls to clk_set_rate_range(), across
+ * multiple users;
+ * - and we have a round_rate ops that always return the maximum
+ * frequency allowed;
+ *
+ * The clock will run at the minimum of all maximum boundaries
+ * requested, even if those boundaries aren't there anymore.
+ */
+static void clk_range_test_multiple_set_range_rate_maximized(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ struct clk *user1, *user2;
+ unsigned long rate;
+
+ user1 = clk_hw_get_clk(hw, NULL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
+
+ user2 = clk_hw_get_clk(hw, NULL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
+ 0);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(user1,
+ 0,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(user2,
+ 0,
+ DUMMY_CLOCK_RATE_1),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(user2, 0, ULONG_MAX),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+
+ clk_put(user2);
+ clk_put(user1);
+}
+
+static struct kunit_case clk_range_maximize_test_cases[] = {
+ KUNIT_CASE(clk_range_test_set_range_rate_maximized),
+ KUNIT_CASE(clk_range_test_multiple_set_range_rate_maximized),
+ {}
+};
+
+static struct kunit_suite clk_range_maximize_test_suite = {
+ .name = "clk-range-maximize-test",
+ .init = clk_maximize_test_init,
+ .exit = clk_test_exit,
+ .test_cases = clk_range_maximize_test_cases,
+};
+
+/*
+ * Test that if:
+ * - we have several subsequent calls to clk_set_rate_range()
+ * - and we have a round_rate ops that always return the minimum
+ * frequency allowed;
+ *
+ * The clock will run at the maximum of all minimum boundaries
+ * requested, even if those boundaries aren't there anymore.
+ */
+static void clk_range_test_set_range_rate_minimized(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
+ 0);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1 + 1000,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+}
+
+/*
+ * Test that if:
+ * - we have several subsequent calls to clk_set_rate_range(), across
+ * multiple users;
+ * - and we have a round_rate ops that always return the minimum
+ * frequency allowed;
+ *
+ * The clock will run at the maximum of all minimum boundaries
+ * requested, even if those boundaries aren't there anymore.
+ */
+static void clk_range_test_multiple_set_range_rate_minimized(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ struct clk *user1, *user2;
+ unsigned long rate;
+
+ user1 = clk_hw_get_clk(hw, NULL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
+
+ user2 = clk_hw_get_clk(hw, NULL);
+ KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(user1,
+ DUMMY_CLOCK_RATE_1,
+ ULONG_MAX),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(user2,
+ DUMMY_CLOCK_RATE_2,
+ ULONG_MAX),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(user2, 0, ULONG_MAX),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+
+ clk_put(user2);
+ clk_put(user1);
+}
+
+static struct kunit_case clk_range_minimize_test_cases[] = {
+ KUNIT_CASE(clk_range_test_set_range_rate_minimized),
+ KUNIT_CASE(clk_range_test_multiple_set_range_rate_minimized),
+ {}
+};
+
+static struct kunit_suite clk_range_minimize_test_suite = {
+ .name = "clk-range-minimize-test",
+ .init = clk_minimize_test_init,
+ .exit = clk_test_exit,
+ .test_cases = clk_range_minimize_test_cases,
+};
+
+kunit_test_suites(
+ &clk_test_suite,
+ &clk_range_test_suite,
+ &clk_range_maximize_test_suite,
+ &clk_range_minimize_test_suite
+);
+MODULE_LICENSE("GPL v2");
projects / platform / kernel / linux-rpi.git / commitdiff