ARM: STi: DT: Add STiH407 family tsin1 pinctrl configuration

tsin1 channel can be configured for either serial or parallel data
transfer. This patch adds the pinctrl config for both possibilities.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index ebf2303..aaf370f 100644 (file)
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -467,6 +467,34 @@
                                        };
                                };
                        };
+
+                       tsin1 {
+                               pinctrl_tsin1_parallel: tsin1_parallel {
+                                       st,pins {
+                                               DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+                                               VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                       };
+                               };
+                               pinctrl_tsin1_serial: tsin1_serial {
+                                       st,pins {
+                                               DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+                                               VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                       };
+                               };
+                       };
                };
 
                pin-controller-front1 {