usb: core: hub: disable autosuspend for TI TUSB8041
authorFlavio Suligoi <f.suligoi@asem.it>
Mon, 19 Dec 2022 12:47:59 +0000 (13:47 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 17 Jan 2023 16:40:56 +0000 (17:40 +0100)
The Texas Instruments TUSB8041 has an autosuspend problem at high
temperature.

If there is not USB traffic, after a couple of ms, the device enters in
autosuspend mode. In this condition the external clock stops working, to
save energy. When the USB activity turns on, ther hub exits the
autosuspend state, the clock starts running again and all works fine.

At ambient temperature all works correctly, but at high temperature,
when the USB activity turns on, the external clock doesn't restart and
the hub disappears from the USB bus.

Disabling the autosuspend mode for this hub solves the issue.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/core/hub.c

index 77e73fc..9eca403 100644 (file)
@@ -44,6 +44,9 @@
 #define USB_PRODUCT_USB5534B                   0x5534
 #define USB_VENDOR_CYPRESS                     0x04b4
 #define USB_PRODUCT_CY7C65632                  0x6570
+#define USB_VENDOR_TEXAS_INSTRUMENTS           0x0451
+#define USB_PRODUCT_TUSB8041_USB3              0x8140
+#define USB_PRODUCT_TUSB8041_USB2              0x8142
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND       0x01
 #define HUB_QUIRK_DISABLE_AUTOSUSPEND          0x02
 
@@ -5854,6 +5857,16 @@ static const struct usb_device_id hub_id_table[] = {
       .idVendor = USB_VENDOR_GENESYS_LOGIC,
       .bInterfaceClass = USB_CLASS_HUB,
       .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                       | USB_DEVICE_ID_MATCH_PRODUCT,
+      .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
+      .idProduct = USB_PRODUCT_TUSB8041_USB2,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                       | USB_DEVICE_ID_MATCH_PRODUCT,
+      .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
+      .idProduct = USB_PRODUCT_TUSB8041_USB3,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
     { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
       .bDeviceClass = USB_CLASS_HUB},
     { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,