ARM: dts: imx53: Add Menlosystems M53 board

Add device tree for the Menlosystems board based on i.MX53 M53 SoM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7776f97..87dc9b7 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -381,6 +381,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
        imx53-kp-ddc.dtb \
        imx53-kp-hsc.dtb \
        imx53-m53evk.dtb \
+       imx53-m53menlo.dtb \
        imx53-mba53.dtb \
        imx53-ppd.dtb \
        imx53-qsb.dtb \

diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
new file mode 100644 (file)
index 0000000..f0a3fde
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+       model = "MENLO M53 EMBEDDED DEVICE";
+       compatible = "menlo,m53menlo", "fsl,imx53";
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_led>;
+
+               user1 {
+                       label = "TestLed601";
+                       gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "mmc0";
+               };
+
+               user2 {
+                       label = "TestLed602";
+                       gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+               };
+
+               eth {
+                       label = "EthLedYe";
+                       gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+       };
+
+       panel {
+               compatible = "edt,etm070080dh6";
+               enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&lvds0_out>;
+                       };
+               };
+       };
+
+       reg_usbh1_vbus: regulator-usbh1-vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&can1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_can1>;
+       status = "okay";
+};
+
+&can2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_can2>;
+       status = "okay";
+};
+
+&clks {
+       assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+                         <&clks IMX5_CLK_CKO1_PODF>,
+                         <&clks IMX5_CLK_CKO1>;
+       assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+       assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&esdhc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_esdhc1>;
+       cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+       wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec>;
+       phy-mode = "rmii";
+       status = "okay";
+};
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1>;
+       status = "okay";
+
+       touchscreen@38 {
+               compatible = "edt,edt-ft5x06";
+               reg = <0x38>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_edt_ft5x06>;
+               interrupt-parent = <&gpio6>;
+               interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+               reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+               wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+       };
+
+       eeprom@50 {
+               compatible = "atmel,24c64";
+               reg = <0x50>;
+               pagesize = <32>;
+       };
+
+       dac@60 {
+               compatible = "microchip,mcp4725";
+               reg = <0x60>;
+       };
+};
+
+&i2c2 {
+       touchscreen@41 {
+               status = "disabled";
+       };
+};
+
+&i2c3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c3>;
+       status = "okay";
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hog>;
+
+       imx53-m53evk {
+               hoggrp {
+                       fsl,pins = <
+                               MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK       0x1c4
+                               MX53_PAD_EIM_EB3__GPIO2_31              0x1d5
+                               MX53_PAD_PATA_DA_0__GPIO7_6             0x1d5
+                               MX53_PAD_GPIO_19__CCM_CLKO              0x1d5
+                               MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK       0x1d5
+                               MX53_PAD_CSI0_DAT4__GPIO5_22            0x1d5
+                               MX53_PAD_CSI0_DAT5__GPIO5_23            0x1d5
+                               MX53_PAD_CSI0_DAT6__GPIO5_24            0x1d5
+                               MX53_PAD_CSI0_DAT7__GPIO5_25            0x1d5
+                               MX53_PAD_CSI0_DAT8__GPIO5_26            0x1d5
+                               MX53_PAD_CSI0_DAT9__GPIO5_27            0x1d5
+                               MX53_PAD_CSI0_DAT10__GPIO5_28           0x1d5
+                               MX53_PAD_CSI0_DAT11__GPIO5_29           0x1d5
+                               MX53_PAD_CSI0_DAT14__GPIO6_0            0x1d5
+                       >;
+               };
+
+               pinctrl_led: ledgrp {
+                       fsl,pins = <
+                               MX53_PAD_CSI0_DAT15__GPIO6_1            0x1d5
+                               MX53_PAD_CSI0_DAT16__GPIO6_2            0x1d5
+                       >;
+               };
+
+               pinctrl_can1: can1grp {
+                       fsl,pins = <
+                               MX53_PAD_GPIO_7__CAN1_TXCAN             0x1c4
+                               MX53_PAD_GPIO_8__CAN1_RXCAN             0x1c4
+                       >;
+               };
+
+               pinctrl_can2: can2grp {
+                       fsl,pins = <
+                               MX53_PAD_KEY_COL4__CAN2_TXCAN           0x1c4
+                               MX53_PAD_KEY_ROW4__CAN2_RXCAN           0x1c4
+                       >;
+               };
+
+               pinctrl_display_gpio: display-gpiogrp {
+                       fsl,pins = <
+                               MX53_PAD_CSI0_DAT12__GPIO5_30           0x1d5 /* Reset */
+                               MX53_PAD_CSI0_DAT13__GPIO5_31           0x1d5 /* Interrupt */
+                       >;
+               };
+
+               pinctrl_edt_ft5x06: edt-ft5x06grp {
+                       fsl,pins = <
+                               MX53_PAD_PATA_DATA9__GPIO2_9            0x1d5 /* Reset */
+                               MX53_PAD_CSI0_DAT19__GPIO6_5            0x1d5 /* Interrupt */
+                               MX53_PAD_PATA_DATA10__GPIO2_10          0x1d5 /* Wake */
+                       >;
+               };
+
+               pinctrl_esdhc1: esdhc1grp {
+                       fsl,pins = <
+                               MX53_PAD_SD1_DATA0__ESDHC1_DAT0         0x1d5
+                               MX53_PAD_SD1_DATA1__ESDHC1_DAT1         0x1d5
+                               MX53_PAD_SD1_DATA2__ESDHC1_DAT2         0x1d5
+                               MX53_PAD_SD1_DATA3__ESDHC1_DAT3         0x1d5
+                               MX53_PAD_SD1_CMD__ESDHC1_CMD            0x1d5
+                               MX53_PAD_SD1_CLK__ESDHC1_CLK            0x1d5
+                       >;
+               };
+
+               pinctrl_fec: fecgrp {
+                       fsl,pins = <
+                               MX53_PAD_FEC_MDC__FEC_MDC               0x4
+                               MX53_PAD_FEC_MDIO__FEC_MDIO             0x1fc
+                               MX53_PAD_FEC_REF_CLK__FEC_TX_CLK        0x180
+                               MX53_PAD_FEC_RX_ER__FEC_RX_ER           0x180
+                               MX53_PAD_FEC_CRS_DV__FEC_RX_DV          0x180
+                               MX53_PAD_FEC_RXD1__FEC_RDATA_1          0x180
+                               MX53_PAD_FEC_RXD0__FEC_RDATA_0          0x180
+                               MX53_PAD_FEC_TX_EN__FEC_TX_EN           0x4
+                               MX53_PAD_FEC_TXD1__FEC_TDATA_1          0x4
+                               MX53_PAD_FEC_TXD0__FEC_TDATA_0          0x4
+                       >;
+               };
+
+               pinctrl_i2c1: i2c1grp {
+                       fsl,pins = <
+                               MX53_PAD_EIM_D21__I2C1_SCL              0x400001e4
+                               MX53_PAD_EIM_D28__I2C1_SDA              0x400001e4
+                       >;
+               };
+
+               pinctrl_i2c3: i2c3grp {
+                       fsl,pins = <
+                               MX53_PAD_GPIO_6__I2C3_SDA               0x400001e4
+                               MX53_PAD_GPIO_5__I2C3_SCL               0x400001e4
+                       >;
+               };
+
+               pinctrl_lvds0: lvds0grp {
+                       /* LVDS pins only have pin mux configuration */
+                       fsl,pins = <
+                               MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK     0x80000000
+                               MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0     0x80000000
+                               MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1     0x80000000
+                               MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2     0x80000000
+                               MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3     0x80000000
+                       >;
+               };
+
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <
+                               MX53_PAD_PATA_DIOW__UART1_TXD_MUX       0x1e4
+                               MX53_PAD_PATA_DMACK__UART1_RXD_MUX      0x1e4
+                       >;
+               };
+
+               pinctrl_uart2: uart2grp {
+                       fsl,pins = <
+                               MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX  0x1e4
+                               MX53_PAD_PATA_DMARQ__UART2_TXD_MUX      0x1e4
+                       >;
+               };
+
+               pinctrl_usb: usbgrp {
+                       fsl,pins = <
+                               MX53_PAD_GPIO_2__GPIO1_2                0x1d5
+                               MX53_PAD_GPIO_3__USBOH3_USBH1_OC        0x1d5
+                       >;
+               };
+       };
+};
+
+&ldb {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_lvds0>;
+       status = "okay";
+
+       lvds0: lvds-channel@0 {
+               reg = <0>;
+               fsl,data-mapping = "spwg";
+               fsl,data-width = <18>;
+               status = "okay";
+
+               port@2 {
+                       reg = <2>;
+
+                       lvds0_out: endpoint {
+                               remote-endpoint = <&panel_in>;
+                       };
+               };
+       };
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&usbh1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb>;
+       vbus-supply = <&reg_usbh1_vbus>;
+       phy_type = "utmi";
+       dr_mode = "peripheral";
+       status = "okay";
+};
+
+&usbotg {
+       dr_mode = "peripheral";
+       status = "okay";
+};