--- /dev/null
+
+===========================
+Intel(R) PRO/Wireless 2100 Network Connection Driver for Linux
+README.ipw2100
+
+March 14, 2005
+
+===========================
+Index
+---------------------------
+0. Introduction
+1. Release 1.1.0 Current Features
+2. Command Line Parameters
+3. Sysfs Helper Files
+4. Radio Kill Switch
+5. Dynamic Firmware
+6. Power Management
+7. Support
+8. License
+
+
+===========================
+0. Introduction
+------------ ----- ----- ---- --- -- -
+
+This document provides a brief overview of the features supported by the
+IPW2100 driver project. The main project website, where the latest
+development version of the driver can be found, is:
+
+ http://ipw2100.sourceforge.net
+
+There you can find the not only the latest releases, but also information about
+potential fixes and patches, as well as links to the development mailing list
+for the driver project.
+
+
+===========================
+1. Release 1.1.0 Current Supported Features
+---------------------------
+- Managed (BSS) and Ad-Hoc (IBSS)
+- WEP (shared key and open)
+- Wireless Tools support
+- 802.1x (tested with XSupplicant 1.0.1)
+
+Enabled (but not supported) features:
+- Monitor/RFMon mode
+- WPA/WPA2
+
+The distinction between officially supported and enabled is a reflection
+on the amount of validation and interoperability testing that has been
+performed on a given feature.
+
+
+===========================
+2. Command Line Parameters
+---------------------------
+
+If the driver is built as a module, the following optional parameters are used
+by entering them on the command line with the modprobe command using this
+syntax:
+
+ modprobe ipw2100 [<option>=<VAL1><,VAL2>...]
+
+For example, to disable the radio on driver loading, enter:
+
+ modprobe ipw2100 disable=1
+
+The ipw2100 driver supports the following module parameters:
+
+Name Value Example:
+debug 0x0-0xffffffff debug=1024
+mode 0,1,2 mode=1 /* AdHoc */
+channel int channel=3 /* Only valid in AdHoc or Monitor */
+associate boolean associate=0 /* Do NOT auto associate */
+disable boolean disable=1 /* Do not power the HW */
+
+
+===========================
+3. Sysfs Helper Files
+---------------------------
+
+There are several ways to control the behavior of the driver. Many of the
+general capabilities are exposed through the Wireless Tools (iwconfig). There
+are a few capabilities that are exposed through entries in the Linux Sysfs.
+
+
+----- Driver Level ------
+For the driver level files, look in /sys/bus/pci/drivers/ipw2100/
+
+ debug_level
+
+ This controls the same global as the 'debug' module parameter. For
+ information on the various debugging levels available, run the 'dvals'
+ script found in the driver source directory.
+
+ NOTE: 'debug_level' is only enabled if CONFIG_IPW2100_DEBUG is turn
+ on.
+
+----- Device Level ------
+For the device level files look in
+
+ /sys/bus/pci/drivers/ipw2100/{PCI-ID}/
+
+For example:
+ /sys/bus/pci/drivers/ipw2100/0000:02:01.0
+
+For the device level files, see /sys/bus/pci/drivers/ipw2100:
+
+ rf_kill
+ read -
+ 0 = RF kill not enabled (radio on)
+ 1 = SW based RF kill active (radio off)
+ 2 = HW based RF kill active (radio off)
+ 3 = Both HW and SW RF kill active (radio off)
+ write -
+ 0 = If SW based RF kill active, turn the radio back on
+ 1 = If radio is on, activate SW based RF kill
+
+ NOTE: If you enable the SW based RF kill and then toggle the HW
+ based RF kill from ON -> OFF -> ON, the radio will NOT come back on
+
+
+===========================
+4. Radio Kill Switch
+---------------------------
+Most laptops provide the ability for the user to physically disable the radio.
+Some vendors have implemented this as a physical switch that requires no
+software to turn the radio off and on. On other laptops, however, the switch
+is controlled through a button being pressed and a software driver then making
+calls to turn the radio off and on. This is referred to as a "software based
+RF kill switch"
+
+See the Sysfs helper file 'rf_kill' for determining the state of the RF switch
+on your system.
+
+
+===========================
+5. Dynamic Firmware
+---------------------------
+As the firmware is licensed under a restricted use license, it can not be
+included within the kernel sources. To enable the IPW2100 you will need a
+firmware image to load into the wireless NIC's processors.
+
+You can obtain these images from <http://ipw2100.sf.net/firmware.php>.
+
+See INSTALL for instructions on installing the firmware.
+
+
+===========================
+6. Power Management
+---------------------------
+The IPW2100 supports the configuration of the Power Save Protocol
+through a private wireless extension interface. The IPW2100 supports
+the following different modes:
+
+ off No power management. Radio is always on.
+ on Automatic power management
+ 1-5 Different levels of power management. The higher the
+ number the greater the power savings, but with an impact to
+ packet latencies.
+
+Power management works by powering down the radio after a certain
+interval of time has passed where no packets are passed through the
+radio. Once powered down, the radio remains in that state for a given
+period of time. For higher power savings, the interval between last
+packet processed to sleep is shorter and the sleep period is longer.
+
+When the radio is asleep, the access point sending data to the station
+must buffer packets at the AP until the station wakes up and requests
+any buffered packets. If you have an AP that does not correctly support
+the PSP protocol you may experience packet loss or very poor performance
+while power management is enabled. If this is the case, you will need
+to try and find a firmware update for your AP, or disable power
+management (via `iwconfig eth1 power off`)
+
+To configure the power level on the IPW2100 you use a combination of
+iwconfig and iwpriv. iwconfig is used to turn power management on, off,
+and set it to auto.
+
+ iwconfig eth1 power off Disables radio power down
+ iwconfig eth1 power on Enables radio power management to
+ last set level (defaults to AUTO)
+ iwpriv eth1 set_power 0 Sets power level to AUTO and enables
+ power management if not previously
+ enabled.
+ iwpriv eth1 set_power 1-5 Set the power level as specified,
+ enabling power management if not
+ previously enabled.
+
+You can view the current power level setting via:
+
+ iwpriv eth1 get_power
+
+It will return the current period or timeout that is configured as a string
+in the form of xxxx/yyyy (z) where xxxx is the timeout interval (amount of
+time after packet processing), yyyy is the period to sleep (amount of time to
+wait before powering the radio and querying the access point for buffered
+packets), and z is the 'power level'. If power management is turned off the
+xxxx/yyyy will be replaced with 'off' -- the level reported will be the active
+level if `iwconfig eth1 power on` is invoked.
+
+
+===========================
+7. Support
+---------------------------
+
+For general development information and support,
+go to:
+
+ http://ipw2100.sf.net/
+
+The ipw2100 1.1.0 driver and firmware can be downloaded from:
+
+ http://support.intel.com
+
+For installation support on the ipw2100 1.1.0 driver on Linux kernels
+2.6.8 or greater, email support is available from:
+
+ http://supportmail.intel.com
+
+===========================
+8. License
+---------------------------
+
+ Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License (version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ License Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
--- /dev/null
+
+Intel(R) PRO/Wireless 2915ABG Driver for Linux in support of:
+
+Intel(R) PRO/Wireless 2200BG Network Connection
+Intel(R) PRO/Wireless 2915ABG Network Connection
+
+Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R)
+PRO/Wireless 2200BG Driver for Linux is a unified driver that works on
+both hardware adapters listed above. In this document the Intel(R)
+PRO/Wireless 2915ABG Driver for Linux will be used to reference the
+unified driver.
+
+Copyright (C) 2004-2005, Intel Corporation
+
+README.ipw2200
+
+Version: 1.0.0
+Date : January 31, 2005
+
+
+Index
+-----------------------------------------------
+1. Introduction
+1.1. Overview of features
+1.2. Module parameters
+1.3. Wireless Extension Private Methods
+1.4. Sysfs Helper Files
+2. About the Version Numbers
+3. Support
+4. License
+
+
+1. Introduction
+-----------------------------------------------
+The following sections attempt to provide a brief introduction to using
+the Intel(R) PRO/Wireless 2915ABG Driver for Linux.
+
+This document is not meant to be a comprehensive manual on
+understanding or using wireless technologies, but should be sufficient
+to get you moving without wires on Linux.
+
+For information on building and installing the driver, see the INSTALL
+file.
+
+
+1.1. Overview of Features
+-----------------------------------------------
+The current release (1.0.0) supports the following features:
+
++ BSS mode (Infrastructure, Managed)
++ IBSS mode (Ad-Hoc)
++ WEP (OPEN and SHARED KEY mode)
++ 802.1x EAP via wpa_supplicant and xsupplicant
++ Wireless Extension support
++ Full B and G rate support (2200 and 2915)
++ Full A rate support (2915 only)
++ Transmit power control
++ S state support (ACPI suspend/resume)
++ long/short preamble support
+
+
+
+1.2. Command Line Parameters
+-----------------------------------------------
+
+Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless
+2915ABG Driver for Linux allows certain configuration options to be
+provided as module parameters. The most common way to specify a module
+parameter is via the command line.
+
+The general form is:
+
+% modprobe ipw2200 parameter=value
+
+Where the supported parameter are:
+
+ associate
+ Set to 0 to disable the auto scan-and-associate functionality of the
+ driver. If disabled, the driver will not attempt to scan
+ for and associate to a network until it has been configured with
+ one or more properties for the target network, for example configuring
+ the network SSID. Default is 1 (auto-associate)
+
+ Example: % modprobe ipw2200 associate=0
+
+ auto_create
+ Set to 0 to disable the auto creation of an Ad-Hoc network
+ matching the channel and network name parameters provided.
+ Default is 1.
+
+ channel
+ channel number for association. The normal method for setting
+ the channel would be to use the standard wireless tools
+ (i.e. `iwconfig eth1 channel 10`), but it is useful sometimes
+ to set this while debugging. Channel 0 means 'ANY'
+
+ debug
+ If using a debug build, this is used to control the amount of debug
+ info is logged. See the 'dval' and 'load' script for more info on
+ how to use this (the dval and load scripts are provided as part
+ of the ipw2200 development snapshot releases available from the
+ SourceForge project at http://ipw2200.sf.net)
+
+ mode
+ Can be used to set the default mode of the adapter.
+ 0 = Managed, 1 = Ad-Hoc
+
+
+1.3. Wireless Extension Private Methods
+-----------------------------------------------
+
+As an interface designed to handle generic hardware, there are certain
+capabilities not exposed through the normal Wireless Tool interface. As
+such, a provision is provided for a driver to declare custom, or
+private, methods. The Intel(R) PRO/Wireless 2915ABG Driver for Linux
+defines several of these to configure various settings.
+
+The general form of using the private wireless methods is:
+
+ % iwpriv $IFNAME method parameters
+
+Where $IFNAME is the interface name the device is registered with
+(typically eth1, customized via one of the various network interface
+name managers, such as ifrename)
+
+The supported private methods are:
+
+ get_mode
+ Can be used to report out which IEEE mode the driver is
+ configured to support. Example:
+
+ % iwpriv eth1 get_mode
+ eth1 get_mode:802.11bg (6)
+
+ set_mode
+ Can be used to configure which IEEE mode the driver will
+ support.
+
+ Usage:
+ % iwpriv eth1 set_mode {mode}
+ Where {mode} is a number in the range 1-7:
+ 1 802.11a (2915 only)
+ 2 802.11b
+ 3 802.11ab (2915 only)
+ 4 802.11g
+ 5 802.11ag (2915 only)
+ 6 802.11bg
+ 7 802.11abg (2915 only)
+
+ get_preamble
+ Can be used to report configuration of preamble length.
+
+ set_preamble
+ Can be used to set the configuration of preamble length:
+
+ Usage:
+ % iwpriv eth1 set_preamble {mode}
+ Where {mode} is one of:
+ 1 Long preamble only
+ 0 Auto (long or short based on connection)
+
+
+1.4. Sysfs Helper Files:
+-----------------------------------------------
+
+The Linux kernel provides a pseudo file system that can be used to
+access various components of the operating system. The Intel(R)
+PRO/Wireless 2915ABG Driver for Linux exposes several configuration
+parameters through this mechanism.
+
+An entry in the sysfs can support reading and/or writing. You can
+typically query the contents of a sysfs entry through the use of cat,
+and can set the contents via echo. For example:
+
+% cat /sys/bus/pci/drivers/ipw2200/debug_level
+
+Will report the current debug level of the driver's logging subsystem
+(only available if CONFIG_IPW_DEBUG was configured when the driver was
+built).
+
+You can set the debug level via:
+
+% echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level
+
+Where $VALUE would be a number in the case of this sysfs entry. The
+input to sysfs files does not have to be a number. For example, the
+firmware loader used by hotplug utilizes sysfs entries for transferring
+the firmware image from user space into the driver.
+
+The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries
+at two levels -- driver level, which apply to all instances of the
+driver (in the event that there are more than one device installed) and
+device level, which applies only to the single specific instance.
+
+
+1.4.1 Driver Level Sysfs Helper Files
+-----------------------------------------------
+
+For the driver level files, look in /sys/bus/pci/drivers/ipw2200/
+
+ debug_level
+
+ This controls the same global as the 'debug' module parameter
+
+
+1.4.2 Device Level Sysfs Helper Files
+-----------------------------------------------
+
+For the device level files, look in
+
+ /sys/bus/pci/drivers/ipw2200/{PCI-ID}/
+
+For example:
+ /sys/bus/pci/drivers/ipw2200/0000:02:01.0
+
+For the device level files, see /sys/bus/pci/[drivers/ipw2200:
+
+ rf_kill
+ read -
+ 0 = RF kill not enabled (radio on)
+ 1 = SW based RF kill active (radio off)
+ 2 = HW based RF kill active (radio off)
+ 3 = Both HW and SW RF kill active (radio off)
+ write -
+ 0 = If SW based RF kill active, turn the radio back on
+ 1 = If radio is on, activate SW based RF kill
+
+ NOTE: If you enable the SW based RF kill and then toggle the HW
+ based RF kill from ON -> OFF -> ON, the radio will NOT come back on
+
+ ucode
+ read-only access to the ucode version number
+
+
+2. About the Version Numbers
+-----------------------------------------------
+
+Due to the nature of open source development projects, there are
+frequently changes being incorporated that have not gone through
+a complete validation process. These changes are incorporated into
+development snapshot releases.
+
+Releases are numbered with a three level scheme:
+
+ major.minor.development
+
+Any version where the 'development' portion is 0 (for example
+1.0.0, 1.1.0, etc.) indicates a stable version that will be made
+available for kernel inclusion.
+
+Any version where the 'development' portion is not a 0 (for
+example 1.0.1, 1.1.5, etc.) indicates a development version that is
+being made available for testing and cutting edge users. The stability
+and functionality of the development releases are not know. We make
+efforts to try and keep all snapshots reasonably stable, but due to the
+frequency of their release, and the desire to get those releases
+available as quickly as possible, unknown anomalies should be expected.
+
+The major version number will be incremented when significant changes
+are made to the driver. Currently, there are no major changes planned.
+
+
+3. Support
+-----------------------------------------------
+
+For installation support of the 1.0.0 version, you can contact
+http://supportmail.intel.com, or you can use the open source project
+support.
+
+For general information and support, go to:
+
+ http://ipw2200.sf.net/
+
+
+4. License
+-----------------------------------------------
+
+ Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License version 2 as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+
comment "Wireless 802.11b ISA/PCI cards support"
depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
+config IPW2100
+ tristate "Intel PRO/Wireless 2100 Network Connection"
+ depends on NET_RADIO && PCI && IEEE80211
+ select FW_LOADER
+ ---help---
+ A driver for the Intel PRO/Wireless 2100 Network
+ Connection 802.11b wireless network adapter.
+
+ See <file:Documentation/networking/README.ipw2100> for information on
+ the capabilities currently enabled in this driver and for tips
+ for debugging issues and problems.
+
+ In order to use this driver, you will need a firmware image for it.
+ You can obtain the firmware from
+ <http://ipw2100.sf.net/>. Once you have the firmware image, you
+ will need to place it in /etc/firmware.
+
+ You will also very likely need the Wireless Tools in order to
+ configure your card:
+
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and remvoed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called ipw2100.ko.
+
+config IPW2100_PROMISC
+ bool "Enable promiscuous mode"
+ depends on IPW2100
+ ---help---
+ Enables promiscuous/monitor mode support for the ipw2100 driver.
+ With this feature compiled into the driver, you can switch to
+ promiscuous mode via the Wireless Tool's Monitor mode. While in this
+ mode, no packets can be sent.
+
+config IPW_DEBUG
+ bool "Enable full debugging output in IPW2100 module."
+ depends on IPW2100
+ ---help---
+ This option will enable debug tracing output for the IPW2100.
+
+ This will result in the kernel module being ~60k larger. You can
+ control which debug output is sent to the kernel log by setting the
+ value in
+
+ /sys/bus/pci/drivers/ipw2100/debug_level
+
+ This entry will only exist if this option is enabled.
+
+ If you are not trying to debug or develop the IPW2100 driver, you
+ most likely want to say N here.
+
+config IPW2200
+ tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
+ depends on NET_RADIO && PCI
+ select FW_LOADER
+ select IEEE80211
+ ---help---
+ A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
+ Connection adapters.
+
+ See <file:Documentation/networking/README.ipw2200> for
+ information on the capabilities currently enabled in this
+ driver and for tips for debugging issues and problems.
+
+ In order to use this driver, you will need a firmware image for it.
+ You can obtain the firmware from
+ <http://ipw2200.sf.net/>. See the above referenced README.ipw2200
+ for information on where to install the firmare images.
+
+ You will also very likely need the Wireless Tools in order to
+ configure your card:
+
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and remvoed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called ipw2200.ko.
+
+config IPW_DEBUG
+ bool "Enable full debugging output in IPW2200 module."
+ depends on IPW2200
+ ---help---
+ This option will enable debug tracing output for the IPW2200.
+
+ This will result in the kernel module being ~100k larger. You can
+ control which debug output is sent to the kernel log by setting the
+ value in
+
+ /sys/bus/pci/drivers/ipw2200/debug_level
+
+ This entry will only exist if this option is enabled.
+
+ To set a value, simply echo an 8-byte hex value to the same file:
+
+ % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level
+
+ You can find the list of debug mask values in
+ drivers/net/wireless/ipw2200.h
+
+ If you are not trying to debug or develop the IPW2200 driver, you
+ most likely want to say N here.
+
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
depends on NET_RADIO && ISA && (PCI || BROKEN)
# Makefile for the Linux Wireless network device drivers.
#
+obj-$(CONFIG_IPW2100) += ipw2100.o
+
+obj-$(CONFIG_IPW2200) += ipw2200.o
+
obj-$(CONFIG_STRIP) += strip.o
obj-$(CONFIG_ARLAN) += arlan.o
#include <linux/device.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
-#include "ieee802_11.h"
+#include <net/ieee80211.h>
#include "atmel.h"
#define DRIVER_MAJOR 0
static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data);
static void atmel_command_irq(struct atmel_private *priv);
static int atmel_validate_channel(struct atmel_private *priv, int channel);
-static void atmel_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header,
+static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header,
u16 frame_len, u8 rssi);
static void atmel_management_timer(u_long a);
static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size);
static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size);
-static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header,
+static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header,
u8 *body, int body_len);
static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index);
static int start_tx (struct sk_buff *skb, struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
- struct ieee802_11_hdr header;
+ struct ieee80211_hdr header;
unsigned long flags;
u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
return 1;
}
- frame_ctl = IEEE802_11_FTYPE_DATA;
+ frame_ctl = IEEE80211_FTYPE_DATA;
header.duration_id = 0;
header.seq_ctl = 0;
if (priv->wep_is_on)
- frame_ctl |= IEEE802_11_FCTL_WEP;
+ frame_ctl |= IEEE80211_FCTL_WEP;
if (priv->operating_mode == IW_MODE_ADHOC) {
memcpy(&header.addr1, skb->data, 6);
memcpy(&header.addr2, dev->dev_addr, 6);
memcpy(&header.addr3, priv->BSSID, 6);
} else {
- frame_ctl |= IEEE802_11_FCTL_TODS;
+ frame_ctl |= IEEE80211_FCTL_TODS;
memcpy(&header.addr1, priv->CurrentBSSID, 6);
memcpy(&header.addr2, dev->dev_addr, 6);
memcpy(&header.addr3, skb->data, 6);
}
static void atmel_transmit_management_frame(struct atmel_private *priv,
- struct ieee802_11_hdr *header,
+ struct ieee80211_hdr *header,
u8 *body, int body_len)
{
u16 buff;
tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT);
}
-static void fast_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *header,
+static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header,
u16 msdu_size, u16 rx_packet_loc, u32 crc)
{
/* fast path: unfragmented packet copy directly into skbuf */
}
memcpy(skbp, header->addr1, 6); /* destination address */
- if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS)
+ if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS)
memcpy(&skbp[6], header->addr3, 6);
else
memcpy(&skbp[6], header->addr2, 6); /* source address */
return (crc ^ 0xffffffff) == netcrc;
}
-static void frag_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *header,
+static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header,
u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags)
{
u8 mac4[6];
u8 source[6];
struct sk_buff *skb;
- if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS)
+ if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS)
memcpy(source, header->addr3, 6);
else
memcpy(source, header->addr2, 6);
static void rx_done_irq(struct atmel_private *priv)
{
int i;
- struct ieee802_11_hdr header;
+ struct ieee80211_hdr header;
for (i = 0;
atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID &&
/* probe for CRC use here if needed once five packets have arrived with
the same crc status, we assume we know what's happening and stop probing */
if (priv->probe_crc) {
- if (!priv->wep_is_on || !(frame_ctl & IEEE802_11_FCTL_WEP)) {
+ if (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_WEP)) {
priv->do_rx_crc = probe_crc(priv, rx_packet_loc, msdu_size);
} else {
priv->do_rx_crc = probe_crc(priv, rx_packet_loc + 24, msdu_size - 24);
}
/* don't CRC header when WEP in use */
- if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE802_11_FCTL_WEP))) {
+ if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_WEP))) {
crc = crc32_le(0xffffffff, (unsigned char *)&header, 24);
}
msdu_size -= 24; /* header */
- if ((frame_ctl & IEEE802_11_FCTL_FTYPE) == IEEE802_11_FTYPE_DATA) {
+ if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) {
- int more_fragments = frame_ctl & IEEE802_11_FCTL_MOREFRAGS;
- u8 packet_fragment_no = seq_control & IEEE802_11_SCTL_FRAG;
- u16 packet_sequence_no = (seq_control & IEEE802_11_SCTL_SEQ) >> 4;
+ int more_fragments = frame_ctl & IEEE80211_FCTL_MOREFRAGS;
+ u8 packet_fragment_no = seq_control & IEEE80211_SCTL_FRAG;
+ u16 packet_sequence_no = (seq_control & IEEE80211_SCTL_SEQ) >> 4;
if (!more_fragments && packet_fragment_no == 0 ) {
fast_rx_path(priv, &header, msdu_size, rx_packet_loc, crc);
}
}
- if ((frame_ctl & IEEE802_11_FCTL_FTYPE) == IEEE802_11_FTYPE_MGMT) {
+ if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
/* copy rest of packet into buffer */
atmel_copy_to_host(priv->dev, (unsigned char *)&priv->rx_buf, rx_packet_loc + 24, msdu_size);
static void send_authentication_request(struct atmel_private *priv, u8 *challenge, int challenge_len)
{
- struct ieee802_11_hdr header;
+ struct ieee80211_hdr header;
struct auth_body auth;
- header.frame_ctl = cpu_to_le16(IEEE802_11_FTYPE_MGMT | IEEE802_11_STYPE_AUTH);
+ header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
header.duration_id = cpu_to_le16(0x8000);
header.seq_ctl = 0;
memcpy(header.addr1, priv->CurrentBSSID, 6);
auth.alg = cpu_to_le16(C80211_MGMT_AAN_SHAREDKEY);
/* no WEP for authentication frames with TrSeqNo 1 */
if (priv->CurrentAuthentTransactionSeqNum != 1)
- header.frame_ctl |= cpu_to_le16(IEEE802_11_FCTL_WEP);
+ header.frame_ctl |= cpu_to_le16(IEEE80211_FCTL_WEP);
} else {
auth.alg = cpu_to_le16(C80211_MGMT_AAN_OPENSYSTEM);
}
{
u8 *ssid_el_p;
int bodysize;
- struct ieee802_11_hdr header;
+ struct ieee80211_hdr header;
struct ass_req_format {
u16 capability;
u16 listen_interval;
u8 rates[4];
} body;
- header.frame_ctl = cpu_to_le16(IEEE802_11_FTYPE_MGMT |
- (is_reassoc ? IEEE802_11_STYPE_REASSOC_REQ : IEEE802_11_STYPE_ASSOC_REQ));
+ header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ (is_reassoc ? IEEE80211_STYPE_REASSOC_REQ : IEEE80211_STYPE_ASSOC_REQ));
header.duration_id = cpu_to_le16(0x8000);
header.seq_ctl = 0;
atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
}
-static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee802_11_hdr *header)
+static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr *header)
{
- if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS)
+ if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS)
return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0;
else
return memcmp(header->addr2, priv->CurrentBSSID, 6) == 0;
}
-static void store_bss_info(struct atmel_private *priv, struct ieee802_11_hdr *header,
+static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr *header,
u16 capability, u16 beacon_period, u8 channel, u8 rssi,
u8 ssid_len, u8 *ssid, int is_beacon)
{
}
/* deals with incoming managment frames. */
-static void atmel_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header,
+static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header,
u16 frame_len, u8 rssi)
{
u16 subtype;
- switch (subtype = le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_STYPE) {
+ switch (subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE) {
case C80211_SUBTYPE_MGMT_BEACON :
case C80211_SUBTYPE_MGMT_ProbeResponse:
+++ /dev/null
-#ifndef _IEEE802_11_H
-#define _IEEE802_11_H
-
-#define IEEE802_11_DATA_LEN 2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
- 6.2.1.1.2.
-
- The figure in section 7.1.2 suggests a body size of up to 2312
- bytes is allowed, which is a bit confusing, I suspect this
- represents the 2304 bytes of real data, plus a possible 8 bytes of
- WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-
-
-#define IEEE802_11_HLEN 30
-#define IEEE802_11_FRAME_LEN (IEEE802_11_DATA_LEN + IEEE802_11_HLEN)
-
-struct ieee802_11_hdr {
- u16 frame_ctl;
- u16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- u16 seq_ctl;
- u8 addr4[ETH_ALEN];
-} __attribute__ ((packed));
-
-/* Frame control field constants */
-#define IEEE802_11_FCTL_VERS 0x0002
-#define IEEE802_11_FCTL_FTYPE 0x000c
-#define IEEE802_11_FCTL_STYPE 0x00f0
-#define IEEE802_11_FCTL_TODS 0x0100
-#define IEEE802_11_FCTL_FROMDS 0x0200
-#define IEEE802_11_FCTL_MOREFRAGS 0x0400
-#define IEEE802_11_FCTL_RETRY 0x0800
-#define IEEE802_11_FCTL_PM 0x1000
-#define IEEE802_11_FCTL_MOREDATA 0x2000
-#define IEEE802_11_FCTL_WEP 0x4000
-#define IEEE802_11_FCTL_ORDER 0x8000
-
-#define IEEE802_11_FTYPE_MGMT 0x0000
-#define IEEE802_11_FTYPE_CTL 0x0004
-#define IEEE802_11_FTYPE_DATA 0x0008
-
-/* management */
-#define IEEE802_11_STYPE_ASSOC_REQ 0x0000
-#define IEEE802_11_STYPE_ASSOC_RESP 0x0010
-#define IEEE802_11_STYPE_REASSOC_REQ 0x0020
-#define IEEE802_11_STYPE_REASSOC_RESP 0x0030
-#define IEEE802_11_STYPE_PROBE_REQ 0x0040
-#define IEEE802_11_STYPE_PROBE_RESP 0x0050
-#define IEEE802_11_STYPE_BEACON 0x0080
-#define IEEE802_11_STYPE_ATIM 0x0090
-#define IEEE802_11_STYPE_DISASSOC 0x00A0
-#define IEEE802_11_STYPE_AUTH 0x00B0
-#define IEEE802_11_STYPE_DEAUTH 0x00C0
-
-/* control */
-#define IEEE802_11_STYPE_PSPOLL 0x00A0
-#define IEEE802_11_STYPE_RTS 0x00B0
-#define IEEE802_11_STYPE_CTS 0x00C0
-#define IEEE802_11_STYPE_ACK 0x00D0
-#define IEEE802_11_STYPE_CFEND 0x00E0
-#define IEEE802_11_STYPE_CFENDACK 0x00F0
-
-/* data */
-#define IEEE802_11_STYPE_DATA 0x0000
-#define IEEE802_11_STYPE_DATA_CFACK 0x0010
-#define IEEE802_11_STYPE_DATA_CFPOLL 0x0020
-#define IEEE802_11_STYPE_DATA_CFACKPOLL 0x0030
-#define IEEE802_11_STYPE_NULLFUNC 0x0040
-#define IEEE802_11_STYPE_CFACK 0x0050
-#define IEEE802_11_STYPE_CFPOLL 0x0060
-#define IEEE802_11_STYPE_CFACKPOLL 0x0070
-
-#define IEEE802_11_SCTL_FRAG 0x000F
-#define IEEE802_11_SCTL_SEQ 0xFFF0
-
-#endif /* _IEEE802_11_H */
--- /dev/null
+/******************************************************************************
+
+ Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+ Portions of this file are based on the sample_* files provided by Wireless
+ Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
+ <jt@hpl.hp.com>
+
+ Portions of this file are based on the Host AP project,
+ Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ <jkmaline@cc.hut.fi>
+ Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+
+ Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
+ ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
+ available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
+
+******************************************************************************/
+/*
+
+ Initial driver on which this is based was developed by Janusz Gorycki,
+ Maciej Urbaniak, and Maciej Sosnowski.
+
+ Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
+
+Theory of Operation
+
+Tx - Commands and Data
+
+Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
+Each TBD contains a pointer to the physical (dma_addr_t) address of data being
+sent to the firmware as well as the length of the data.
+
+The host writes to the TBD queue at the WRITE index. The WRITE index points
+to the _next_ packet to be written and is advanced when after the TBD has been
+filled.
+
+The firmware pulls from the TBD queue at the READ index. The READ index points
+to the currently being read entry, and is advanced once the firmware is
+done with a packet.
+
+When data is sent to the firmware, the first TBD is used to indicate to the
+firmware if a Command or Data is being sent. If it is Command, all of the
+command information is contained within the physical address referred to by the
+TBD. If it is Data, the first TBD indicates the type of data packet, number
+of fragments, etc. The next TBD then referrs to the actual packet location.
+
+The Tx flow cycle is as follows:
+
+1) ipw2100_tx() is called by kernel with SKB to transmit
+2) Packet is move from the tx_free_list and appended to the transmit pending
+ list (tx_pend_list)
+3) work is scheduled to move pending packets into the shared circular queue.
+4) when placing packet in the circular queue, the incoming SKB is DMA mapped
+ to a physical address. That address is entered into a TBD. Two TBDs are
+ filled out. The first indicating a data packet, the second referring to the
+ actual payload data.
+5) the packet is removed from tx_pend_list and placed on the end of the
+ firmware pending list (fw_pend_list)
+6) firmware is notified that the WRITE index has
+7) Once the firmware has processed the TBD, INTA is triggered.
+8) For each Tx interrupt received from the firmware, the READ index is checked
+ to see which TBDs are done being processed.
+9) For each TBD that has been processed, the ISR pulls the oldest packet
+ from the fw_pend_list.
+10)The packet structure contained in the fw_pend_list is then used
+ to unmap the DMA address and to free the SKB originally passed to the driver
+ from the kernel.
+11)The packet structure is placed onto the tx_free_list
+
+The above steps are the same for commands, only the msg_free_list/msg_pend_list
+are used instead of tx_free_list/tx_pend_list
+
+...
+
+Critical Sections / Locking :
+
+There are two locks utilized. The first is the low level lock (priv->low_lock)
+that protects the following:
+
+- Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
+
+ tx_free_list : Holds pre-allocated Tx buffers.
+ TAIL modified in __ipw2100_tx_process()
+ HEAD modified in ipw2100_tx()
+
+ tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
+ TAIL modified ipw2100_tx()
+ HEAD modified by X__ipw2100_tx_send_data()
+
+ msg_free_list : Holds pre-allocated Msg (Command) buffers
+ TAIL modified in __ipw2100_tx_process()
+ HEAD modified in ipw2100_hw_send_command()
+
+ msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
+ TAIL modified in ipw2100_hw_send_command()
+ HEAD modified in X__ipw2100_tx_send_commands()
+
+ The flow of data on the TX side is as follows:
+
+ MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
+ TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
+
+ The methods that work on the TBD ring are protected via priv->low_lock.
+
+- The internal data state of the device itself
+- Access to the firmware read/write indexes for the BD queues
+ and associated logic
+
+All external entry functions are locked with the priv->action_lock to ensure
+that only one external action is invoked at a time.
+
+
+*/
+
+#include <linux/compiler.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#define __KERNEL_SYSCALLS__
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/unistd.h>
+#include <linux/stringify.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/time.h>
+#include <linux/firmware.h>
+#include <linux/acpi.h>
+#include <linux/ctype.h>
+
+#include "ipw2100.h"
+
+#define IPW2100_VERSION "1.1.0"
+
+#define DRV_NAME "ipw2100"
+#define DRV_VERSION IPW2100_VERSION
+#define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
+#define DRV_COPYRIGHT "Copyright(c) 2003-2004 Intel Corporation"
+
+
+/* Debugging stuff */
+#ifdef CONFIG_IPW_DEBUG
+#define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */
+#endif
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+static int mode = 0;
+static int channel = 0;
+static int associate = 1;
+static int disable = 0;
+#ifdef CONFIG_PM
+static struct ipw2100_fw ipw2100_firmware;
+#endif
+
+#include <linux/moduleparam.h>
+module_param(debug, int, 0444);
+module_param(mode, int, 0444);
+module_param(channel, int, 0444);
+module_param(associate, int, 0444);
+module_param(disable, int, 0444);
+
+MODULE_PARM_DESC(debug, "debug level");
+MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
+MODULE_PARM_DESC(channel, "channel");
+MODULE_PARM_DESC(associate, "auto associate when scanning (default on)");
+MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
+
+u32 ipw2100_debug_level = IPW_DL_NONE;
+
+#ifdef CONFIG_IPW_DEBUG
+static const char *command_types[] = {
+ "undefined",
+ "unused", /* HOST_ATTENTION */
+ "HOST_COMPLETE",
+ "unused", /* SLEEP */
+ "unused", /* HOST_POWER_DOWN */
+ "unused",
+ "SYSTEM_CONFIG",
+ "unused", /* SET_IMR */
+ "SSID",
+ "MANDATORY_BSSID",
+ "AUTHENTICATION_TYPE",
+ "ADAPTER_ADDRESS",
+ "PORT_TYPE",
+ "INTERNATIONAL_MODE",
+ "CHANNEL",
+ "RTS_THRESHOLD",
+ "FRAG_THRESHOLD",
+ "POWER_MODE",
+ "TX_RATES",
+ "BASIC_TX_RATES",
+ "WEP_KEY_INFO",
+ "unused",
+ "unused",
+ "unused",
+ "unused",
+ "WEP_KEY_INDEX",
+ "WEP_FLAGS",
+ "ADD_MULTICAST",
+ "CLEAR_ALL_MULTICAST",
+ "BEACON_INTERVAL",
+ "ATIM_WINDOW",
+ "CLEAR_STATISTICS",
+ "undefined",
+ "undefined",
+ "undefined",
+ "undefined",
+ "TX_POWER_INDEX",
+ "undefined",
+ "undefined",
+ "undefined",
+ "undefined",
+ "undefined",
+ "undefined",
+ "BROADCAST_SCAN",
+ "CARD_DISABLE",
+ "PREFERRED_BSSID",
+ "SET_SCAN_OPTIONS",
+ "SCAN_DWELL_TIME",
+ "SWEEP_TABLE",
+ "AP_OR_STATION_TABLE",
+ "GROUP_ORDINALS",
+ "SHORT_RETRY_LIMIT",
+ "LONG_RETRY_LIMIT",
+ "unused", /* SAVE_CALIBRATION */
+ "unused", /* RESTORE_CALIBRATION */
+ "undefined",
+ "undefined",
+ "undefined",
+ "HOST_PRE_POWER_DOWN",
+ "unused", /* HOST_INTERRUPT_COALESCING */
+ "undefined",
+ "CARD_DISABLE_PHY_OFF",
+ "MSDU_TX_RATES"
+ "undefined",
+ "undefined",
+ "SET_STATION_STAT_BITS",
+ "CLEAR_STATIONS_STAT_BITS",
+ "LEAP_ROGUE_MODE",
+ "SET_SECURITY_INFORMATION",
+ "DISASSOCIATION_BSSID",
+ "SET_WPA_ASS_IE"
+};
+#endif
+
+
+/* Pre-decl until we get the code solid and then we can clean it up */
+static void X__ipw2100_tx_send_commands(struct ipw2100_priv *priv);
+static void X__ipw2100_tx_send_data(struct ipw2100_priv *priv);
+static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
+
+static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
+static void ipw2100_queues_free(struct ipw2100_priv *priv);
+static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
+
+
+static inline void read_register(struct net_device *dev, u32 reg, u32 *val)
+{
+ *val = readl((void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
+}
+
+static inline void write_register(struct net_device *dev, u32 reg, u32 val)
+{
+ writel(val, (void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
+}
+
+static inline void read_register_word(struct net_device *dev, u32 reg, u16 *val)
+{
+ *val = readw((void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
+}
+
+static inline void read_register_byte(struct net_device *dev, u32 reg, u8 *val)
+{
+ *val = readb((void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
+}
+
+static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
+{
+ writew(val, (void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
+}
+
+
+static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
+{
+ writeb(val, (void *)(dev->base_addr + reg));
+ IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
+}
+
+static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 *val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void read_nic_word(struct net_device *dev, u32 addr, u16 *val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 *val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
+{
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+ write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
+{
+ write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
+ addr & IPW_REG_INDIRECT_ADDR_MASK);
+}
+
+static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
+{
+ write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
+}
+
+static inline void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
+ const u8 *buf)
+{
+ u32 aligned_addr;
+ u32 aligned_len;
+ u32 dif_len;
+ u32 i;
+
+ /* read first nibble byte by byte */
+ aligned_addr = addr & (~0x3);
+ dif_len = addr - aligned_addr;
+ if (dif_len) {
+ /* Start reading at aligned_addr + dif_len */
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ aligned_addr);
+ for (i = dif_len; i < 4; i++, buf++)
+ write_register_byte(
+ dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
+ *buf);
+
+ len -= dif_len;
+ aligned_addr += 4;
+ }
+
+ /* read DWs through autoincrement registers */
+ write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
+ aligned_addr);
+ aligned_len = len & (~0x3);
+ for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
+ write_register(
+ dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *)buf);
+
+ /* copy the last nibble */
+ dif_len = len - aligned_len;
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
+ for (i = 0; i < dif_len; i++, buf++)
+ write_register_byte(
+ dev, IPW_REG_INDIRECT_ACCESS_DATA + i, *buf);
+}
+
+static inline void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
+ u8 *buf)
+{
+ u32 aligned_addr;
+ u32 aligned_len;
+ u32 dif_len;
+ u32 i;
+
+ /* read first nibble byte by byte */
+ aligned_addr = addr & (~0x3);
+ dif_len = addr - aligned_addr;
+ if (dif_len) {
+ /* Start reading at aligned_addr + dif_len */
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ aligned_addr);
+ for (i = dif_len; i < 4; i++, buf++)
+ read_register_byte(
+ dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
+
+ len -= dif_len;
+ aligned_addr += 4;
+ }
+
+ /* read DWs through autoincrement registers */
+ write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
+ aligned_addr);
+ aligned_len = len & (~0x3);
+ for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
+ read_register(dev, IPW_REG_AUTOINCREMENT_DATA,
+ (u32 *)buf);
+
+ /* copy the last nibble */
+ dif_len = len - aligned_len;
+ write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+ aligned_addr);
+ for (i = 0; i < dif_len; i++, buf++)
+ read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA +
+ i, buf);
+}
+
+static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
+{
+ return (dev->base_addr &&
+ (readl((void *)(dev->base_addr + IPW_REG_DOA_DEBUG_AREA_START))
+ == IPW_DATA_DOA_DEBUG_VALUE));
+}
+
+int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
+ void *val, u32 *len)
+{
+ struct ipw2100_ordinals *ordinals = &priv->ordinals;
+ u32 addr;
+ u32 field_info;
+ u16 field_len;
+ u16 field_count;
+ u32 total_length;
+
+ if (ordinals->table1_addr == 0) {
+ IPW_DEBUG_WARNING(DRV_NAME ": attempt to use fw ordinals "
+ "before they have been loaded.\n");
+ return -EINVAL;
+ }
+
+ if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
+ if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
+ *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+
+ IPW_DEBUG_WARNING(DRV_NAME
+ ": ordinal buffer length too small, need %d\n",
+ IPW_ORD_TAB_1_ENTRY_SIZE);
+
+ return -EINVAL;
+ }
+
+ read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2),
+ &addr);
+ read_nic_dword(priv->net_dev, addr, val);
+
+ *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+
+ return 0;
+ }
+
+ if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
+
+ ord -= IPW_START_ORD_TAB_2;
+
+ /* get the address of statistic */
+ read_nic_dword(priv->net_dev, ordinals->table2_addr + (ord << 3),
+ &addr);
+
+ /* get the second DW of statistics ;
+ * two 16-bit words - first is length, second is count */
+ read_nic_dword(priv->net_dev,
+ ordinals->table2_addr + (ord << 3) + sizeof(u32),
+ &field_info);
+
+ /* get each entry length */
+ field_len = *((u16 *)&field_info);
+
+ /* get number of entries */
+ field_count = *(((u16 *)&field_info) + 1);
+
+ /* abort if no enought memory */
+ total_length = field_len * field_count;
+ if (total_length > *len) {
+ *len = total_length;
+ return -EINVAL;
+ }
+
+ *len = total_length;
+ if (!total_length)
+ return 0;
+
+ /* read the ordinal data from the SRAM */
+ read_nic_memory(priv->net_dev, addr, total_length, val);
+
+ return 0;
+ }
+
+ IPW_DEBUG_WARNING(DRV_NAME ": ordinal %d neither in table 1 nor "
+ "in table 2\n", ord);
+
+ return -EINVAL;
+}
+
+static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 *val,
+ u32 *len)
+{
+ struct ipw2100_ordinals *ordinals = &priv->ordinals;
+ u32 addr;
+
+ if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
+ if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
+ *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+ IPW_DEBUG_INFO("wrong size\n");
+ return -EINVAL;
+ }
+
+ read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2),
+ &addr);
+
+ write_nic_dword(priv->net_dev, addr, *val);
+
+ *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+
+ return 0;
+ }
+
+ IPW_DEBUG_INFO("wrong table\n");
+ if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
+ return -EINVAL;
+
+ return -EINVAL;
+}
+
+static char *snprint_line(char *buf, size_t count,
+ const u8 *data, u32 len, u32 ofs)
+{
+ int out, i, j, l;
+ char c;
+
+ out = snprintf(buf, count, "%08X", ofs);
+
+ for (l = 0, i = 0; i < 2; i++) {
+ out += snprintf(buf + out, count - out, " ");
+ for (j = 0; j < 8 && l < len; j++, l++)
+ out += snprintf(buf + out, count - out, "%02X ",
+ data[(i * 8 + j)]);
+ for (; j < 8; j++)
+ out += snprintf(buf + out, count - out, " ");
+ }
+
+ out += snprintf(buf + out, count - out, " ");
+ for (l = 0, i = 0; i < 2; i++) {
+ out += snprintf(buf + out, count - out, " ");
+ for (j = 0; j < 8 && l < len; j++, l++) {
+ c = data[(i * 8 + j)];
+ if (!isascii(c) || !isprint(c))
+ c = '.';
+
+ out += snprintf(buf + out, count - out, "%c", c);
+ }
+
+ for (; j < 8; j++)
+ out += snprintf(buf + out, count - out, " ");
+ }
+
+ return buf;
+}
+
+static void printk_buf(int level, const u8 *data, u32 len)
+{
+ char line[81];
+ u32 ofs = 0;
+ if (!(ipw2100_debug_level & level))
+ return;
+
+ while (len) {
+ printk(KERN_DEBUG "%s\n",
+ snprint_line(line, sizeof(line), &data[ofs],
+ min(len, 16U), ofs));
+ ofs += 16;
+ len -= min(len, 16U);
+ }
+}
+
+
+
+#define MAX_RESET_BACKOFF 10
+
+static inline void schedule_reset(struct ipw2100_priv *priv)
+{
+ unsigned long now = get_seconds();
+
+ /* If we haven't received a reset request within the backoff period,
+ * then we can reset the backoff interval so this reset occurs
+ * immediately */
+ if (priv->reset_backoff &&
+ (now - priv->last_reset > priv->reset_backoff))
+ priv->reset_backoff = 0;
+
+ priv->last_reset = get_seconds();
+
+ if (!(priv->status & STATUS_RESET_PENDING)) {
+ IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
+ priv->net_dev->name, priv->reset_backoff);
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+ priv->status |= STATUS_RESET_PENDING;
+ if (priv->reset_backoff)
+ queue_delayed_work(priv->workqueue, &priv->reset_work,
+ priv->reset_backoff * HZ);
+ else
+ queue_work(priv->workqueue, &priv->reset_work);
+
+ if (priv->reset_backoff < MAX_RESET_BACKOFF)
+ priv->reset_backoff++;
+
+ wake_up_interruptible(&priv->wait_command_queue);
+ } else
+ IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
+ priv->net_dev->name);
+
+}
+
+#define HOST_COMPLETE_TIMEOUT (2 * HZ)
+static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
+ struct host_command * cmd)
+{
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ unsigned long flags;
+ int err = 0;
+
+ IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
+ command_types[cmd->host_command], cmd->host_command,
+ cmd->host_command_length);
+ printk_buf(IPW_DL_HC, (u8*)cmd->host_command_parameters,
+ cmd->host_command_length);
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (priv->fatal_error) {
+ IPW_DEBUG_INFO("Attempt to send command while hardware in fatal error condition.\n");
+ err = -EIO;
+ goto fail_unlock;
+ }
+
+ if (!(priv->status & STATUS_RUNNING)) {
+ IPW_DEBUG_INFO("Attempt to send command while hardware is not running.\n");
+ err = -EIO;
+ goto fail_unlock;
+ }
+
+ if (priv->status & STATUS_CMD_ACTIVE) {
+ IPW_DEBUG_INFO("Attempt to send command while another command is pending.\n");
+ err = -EBUSY;
+ goto fail_unlock;
+ }
+
+ if (list_empty(&priv->msg_free_list)) {
+ IPW_DEBUG_INFO("no available msg buffers\n");
+ goto fail_unlock;
+ }
+
+ priv->status |= STATUS_CMD_ACTIVE;
+ priv->messages_sent++;
+
+ element = priv->msg_free_list.next;
+
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+ packet->jiffy_start = jiffies;
+
+ /* initialize the firmware command packet */
+ packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
+ packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
+ packet->info.c_struct.cmd->host_command_len_reg = cmd->host_command_length;
+ packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
+
+ memcpy(packet->info.c_struct.cmd->host_command_params_reg,
+ cmd->host_command_parameters,
+ sizeof(packet->info.c_struct.cmd->host_command_params_reg));
+
+ list_del(element);
+ DEC_STAT(&priv->msg_free_stat);
+
+ list_add_tail(element, &priv->msg_pend_list);
+ INC_STAT(&priv->msg_pend_stat);
+
+ X__ipw2100_tx_send_commands(priv);
+ X__ipw2100_tx_send_data(priv);
+
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ /*
+ * We must wait for this command to complete before another
+ * command can be sent... but if we wait more than 3 seconds
+ * then there is a problem.
+ */
+
+ err = wait_event_interruptible_timeout(
+ priv->wait_command_queue, !(priv->status & STATUS_CMD_ACTIVE),
+ HOST_COMPLETE_TIMEOUT);
+
+ if (err == 0) {
+ IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
+ HOST_COMPLETE_TIMEOUT / (HZ / 100));
+ priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
+ priv->status &= ~STATUS_CMD_ACTIVE;
+ schedule_reset(priv);
+ return -EIO;
+ }
+
+ if (priv->fatal_error) {
+ IPW_DEBUG_WARNING("%s: firmware fatal error\n",
+ priv->net_dev->name);
+ return -EIO;
+ }
+
+ /* !!!!! HACK TEST !!!!!
+ * When lots of debug trace statements are enabled, the driver
+ * doesn't seem to have as many firmware restart cycles...
+ *
+ * As a test, we're sticking in a 1/100s delay here */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HZ / 100);
+
+ return 0;
+
+ fail_unlock:
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ return err;
+}
+
+
+/*
+ * Verify the values and data access of the hardware
+ * No locks needed or used. No functions called.
+ */
+static int ipw2100_verify(struct ipw2100_priv *priv)
+{
+ u32 data1, data2;
+ u32 address;
+
+ u32 val1 = 0x76543210;
+ u32 val2 = 0xFEDCBA98;
+
+ /* Domain 0 check - all values should be DOA_DEBUG */
+ for (address = IPW_REG_DOA_DEBUG_AREA_START;
+ address < IPW_REG_DOA_DEBUG_AREA_END;
+ address += sizeof(u32)) {
+ read_register(priv->net_dev, address, &data1);
+ if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
+ return -EIO;
+ }
+
+ /* Domain 1 check - use arbitrary read/write compare */
+ for (address = 0; address < 5; address++) {
+ /* The memory area is not used now */
+ write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
+ val1);
+ write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
+ val2);
+ read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
+ &data1);
+ read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
+ &data2);
+ if (val1 == data1 && val2 == data2)
+ return 0;
+ }
+
+ return -EIO;
+}
+
+/*
+ *
+ * Loop until the CARD_DISABLED bit is the same value as the
+ * supplied parameter
+ *
+ * TODO: See if it would be more efficient to do a wait/wake
+ * cycle and have the completion event trigger the wakeup
+ *
+ */
+#define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
+static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
+{
+ int i;
+ u32 card_state;
+ u32 len = sizeof(card_state);
+ int err;
+
+ for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
+ err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
+ &card_state, &len);
+ if (err) {
+ IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
+ "failed.\n");
+ return 0;
+ }
+
+ /* We'll break out if either the HW state says it is
+ * in the state we want, or if HOST_COMPLETE command
+ * finishes */
+ if ((card_state == state) ||
+ ((priv->status & STATUS_ENABLED) ?
+ IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
+ if (state == IPW_HW_STATE_ENABLED)
+ priv->status |= STATUS_ENABLED;
+ else
+ priv->status &= ~STATUS_ENABLED;
+
+ return 0;
+ }
+
+ udelay(50);
+ }
+
+ IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
+ state ? "DISABLED" : "ENABLED");
+ return -EIO;
+}
+
+
+/*********************************************************************
+ Procedure : sw_reset_and_clock
+ Purpose : Asserts s/w reset, asserts clock initialization
+ and waits for clock stabilization
+ ********************************************************************/
+static int sw_reset_and_clock(struct ipw2100_priv *priv)
+{
+ int i;
+ u32 r;
+
+ // assert s/w reset
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_SW_RESET);
+
+ // wait for clock stabilization
+ for (i = 0; i < 1000; i++) {
+ udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
+
+ // check clock ready bit
+ read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
+ if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
+ break;
+ }
+
+ if (i == 1000)
+ return -EIO; // TODO: better error value
+
+ /* set "initialization complete" bit to move adapter to
+ * D0 state */
+ write_register(priv->net_dev, IPW_REG_GP_CNTRL,
+ IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
+
+ /* wait for clock stabilization */
+ for (i = 0; i < 10000; i++) {
+ udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
+
+ /* check clock ready bit */
+ read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
+ if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
+ break;
+ }
+
+ if (i == 10000)
+ return -EIO; /* TODO: better error value */
+
+//#if CONFIG_IPW2100_D0ENABLED
+ /* set D0 standby bit */
+ read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
+ write_register(priv->net_dev, IPW_REG_GP_CNTRL,
+ r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
+//#endif
+
+ return 0;
+}
+
+/*********************************************************************
+ Procedure : ipw2100_ipw2100_download_firmware
+ Purpose : Initiaze adapter after power on.
+ The sequence is:
+ 1. assert s/w reset first!
+ 2. awake clocks & wait for clock stabilization
+ 3. hold ARC (don't ask me why...)
+ 4. load Dino ucode and reset/clock init again
+ 5. zero-out shared mem
+ 6. download f/w
+ *******************************************************************/
+static int ipw2100_download_firmware(struct ipw2100_priv *priv)
+{
+ u32 address;
+ int err;
+
+#ifndef CONFIG_PM
+ /* Fetch the firmware and microcode */
+ struct ipw2100_fw ipw2100_firmware;
+#endif
+
+ if (priv->fatal_error) {
+ IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
+ "fatal error %d. Interface must be brought down.\n",
+ priv->net_dev->name, priv->fatal_error);
+ return -EINVAL;
+ }
+
+#ifdef CONFIG_PM
+ if (!ipw2100_firmware.version) {
+ err = ipw2100_get_firmware(priv, &ipw2100_firmware);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
+ priv->net_dev->name, err);
+ priv->fatal_error = IPW2100_ERR_FW_LOAD;
+ goto fail;
+ }
+ }
+#else
+ err = ipw2100_get_firmware(priv, &ipw2100_firmware);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
+ priv->net_dev->name, err);
+ priv->fatal_error = IPW2100_ERR_FW_LOAD;
+ goto fail;
+ }
+#endif
+ priv->firmware_version = ipw2100_firmware.version;
+
+ /* s/w reset and clock stabilization */
+ err = sw_reset_and_clock(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+ err = ipw2100_verify(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+ /* Hold ARC */
+ write_nic_dword(priv->net_dev,
+ IPW_INTERNAL_REGISTER_HALT_AND_RESET,
+ 0x80000000);
+
+ /* allow ARC to run */
+ write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
+
+ /* load microcode */
+ err = ipw2100_ucode_download(priv, &ipw2100_firmware);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Error loading microcode: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+ /* release ARC */
+ write_nic_dword(priv->net_dev,
+ IPW_INTERNAL_REGISTER_HALT_AND_RESET,
+ 0x00000000);
+
+ /* s/w reset and clock stabilization (again!!!) */
+ err = sw_reset_and_clock(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+ /* load f/w */
+ err = ipw2100_fw_download(priv, &ipw2100_firmware);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
+ priv->net_dev->name, err);
+ goto fail;
+ }
+
+#ifndef CONFIG_PM
+ /*
+ * When the .resume method of the driver is called, the other
+ * part of the system, i.e. the ide driver could still stay in
+ * the suspend stage. This prevents us from loading the firmware
+ * from the disk. --YZ
+ */
+
+ /* free any storage allocated for firmware image */
+ ipw2100_release_firmware(priv, &ipw2100_firmware);
+#endif
+
+ /* zero out Domain 1 area indirectly (Si requirement) */
+ for (address = IPW_HOST_FW_SHARED_AREA0;
+ address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+ for (address = IPW_HOST_FW_SHARED_AREA1;
+ address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+ for (address = IPW_HOST_FW_SHARED_AREA2;
+ address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+ for (address = IPW_HOST_FW_SHARED_AREA3;
+ address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+ for (address = IPW_HOST_FW_INTERRUPT_AREA;
+ address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
+ write_nic_dword(priv->net_dev, address, 0);
+
+ return 0;
+
+ fail:
+ ipw2100_release_firmware(priv, &ipw2100_firmware);
+ return err;
+}
+
+static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
+{
+ if (priv->status & STATUS_INT_ENABLED)
+ return;
+ priv->status |= STATUS_INT_ENABLED;
+ write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
+}
+
+static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
+{
+ if (!(priv->status & STATUS_INT_ENABLED))
+ return;
+ priv->status &= ~STATUS_INT_ENABLED;
+ write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
+}
+
+
+static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
+{
+ struct ipw2100_ordinals *ord = &priv->ordinals;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
+ &ord->table1_addr);
+
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
+ &ord->table2_addr);
+
+ read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
+ read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
+
+ ord->table2_size &= 0x0000FFFF;
+
+ IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
+ IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
+{
+ u32 reg = 0;
+ /*
+ * Set GPIO 3 writable by FW; GPIO 1 writable
+ * by driver and enable clock
+ */
+ reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
+ IPW_BIT_GPIO_LED_OFF);
+ write_register(priv->net_dev, IPW_REG_GPIO, reg);
+}
+
+static inline int rf_kill_active(struct ipw2100_priv *priv)
+{
+#define MAX_RF_KILL_CHECKS 5
+#define RF_KILL_CHECK_DELAY 40
+#define RF_KILL_CHECK_THRESHOLD 3
+
+ unsigned short value = 0;
+ u32 reg = 0;
+ int i;
+
+ if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
+ priv->status &= ~STATUS_RF_KILL_HW;
+ return 0;
+ }
+
+ for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
+ udelay(RF_KILL_CHECK_DELAY);
+ read_register(priv->net_dev, IPW_REG_GPIO, ®);
+ value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
+ }
+
+ if (value == 0)
+ priv->status |= STATUS_RF_KILL_HW;
+ else
+ priv->status &= ~STATUS_RF_KILL_HW;
+
+ return (value == 0);
+}
+
+static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
+{
+ u32 addr, len;
+ u32 val;
+
+ /*
+ * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
+ */
+ len = sizeof(addr);
+ if (ipw2100_get_ordinal(
+ priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
+ &addr, &len)) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return -EIO;
+ }
+
+ IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
+
+ /*
+ * EEPROM version is the byte at offset 0xfd in firmware
+ * We read 4 bytes, then shift out the byte we actually want */
+ read_nic_dword(priv->net_dev, addr + 0xFC, &val);
+ priv->eeprom_version = (val >> 24) & 0xFF;
+ IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
+
+ /*
+ * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
+ *
+ * notice that the EEPROM bit is reverse polarity, i.e.
+ * bit = 0 signifies HW RF kill switch is supported
+ * bit = 1 signifies HW RF kill switch is NOT supported
+ */
+ read_nic_dword(priv->net_dev, addr + 0x20, &val);
+ if (!((val >> 24) & 0x01))
+ priv->hw_features |= HW_FEATURE_RFKILL;
+
+ IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
+ (priv->hw_features & HW_FEATURE_RFKILL) ?
+ "" : "not ");
+
+ return 0;
+}
+
+/*
+ * Start firmware execution after power on and intialization
+ * The sequence is:
+ * 1. Release ARC
+ * 2. Wait for f/w initialization completes;
+ */
+static int ipw2100_start_adapter(struct ipw2100_priv *priv)
+{
+#define IPW_WAIT_FW_INIT_COMPLETE_DELAY (40 * HZ / 1000)
+ int i;
+ u32 inta, inta_mask, gpio;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ if (priv->status & STATUS_RUNNING)
+ return 0;
+
+ /*
+ * Initialize the hw - drive adapter to DO state by setting
+ * init_done bit. Wait for clk_ready bit and Download
+ * fw & dino ucode
+ */
+ if (ipw2100_download_firmware(priv)) {
+ IPW_DEBUG_ERROR("%s: Failed to power on the adapter.\n",
+ priv->net_dev->name);
+ return -EIO;
+ }
+
+ /* Clear the Tx, Rx and Msg queues and the r/w indexes
+ * in the firmware RBD and TBD ring queue */
+ ipw2100_queues_initialize(priv);
+
+ ipw2100_hw_set_gpio(priv);
+
+ /* TODO -- Look at disabling interrupts here to make sure none
+ * get fired during FW initialization */
+
+ /* Release ARC - clear reset bit */
+ write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
+
+ /* wait for f/w intialization complete */
+ IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
+ i = 5000;
+ do {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(IPW_WAIT_FW_INIT_COMPLETE_DELAY);
+ /* Todo... wait for sync command ... */
+
+ read_register(priv->net_dev, IPW_REG_INTA, &inta);
+
+ /* check "init done" bit */
+ if (inta & IPW2100_INTA_FW_INIT_DONE) {
+ /* reset "init done" bit */
+ write_register(priv->net_dev, IPW_REG_INTA,
+ IPW2100_INTA_FW_INIT_DONE);
+ break;
+ }
+
+ /* check error conditions : we check these after the firmware
+ * check so that if there is an error, the interrupt handler
+ * will see it and the adapter will be reset */
+ if (inta &
+ (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
+ /* clear error conditions */
+ write_register(priv->net_dev, IPW_REG_INTA,
+ IPW2100_INTA_FATAL_ERROR |
+ IPW2100_INTA_PARITY_ERROR);
+ }
+ } while (i--);
+
+ /* Clear out any pending INTAs since we aren't supposed to have
+ * interrupts enabled at this point... */
+ read_register(priv->net_dev, IPW_REG_INTA, &inta);
+ read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
+ inta &= IPW_INTERRUPT_MASK;
+ /* Clear out any pending interrupts */
+ if (inta & inta_mask)
+ write_register(priv->net_dev, IPW_REG_INTA, inta);
+
+ IPW_DEBUG_FW("f/w initialization complete: %s\n",
+ i ? "SUCCESS" : "FAILED");
+
+ if (!i) {
+ IPW_DEBUG_WARNING("%s: Firmware did not initialize.\n",
+ priv->net_dev->name);
+ return -EIO;
+ }
+
+ /* allow firmware to write to GPIO1 & GPIO3 */
+ read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
+
+ gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
+
+ write_register(priv->net_dev, IPW_REG_GPIO, gpio);
+
+ /* Ready to receive commands */
+ priv->status |= STATUS_RUNNING;
+
+ /* The adapter has been reset; we are not associated */
+ priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
+{
+ if (!priv->fatal_error)
+ return;
+
+ priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
+ priv->fatal_index %= IPW2100_ERROR_QUEUE;
+ priv->fatal_error = 0;
+}
+
+
+/* NOTE: Our interrupt is disabled when this method is called */
+static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
+{
+ u32 reg;
+ int i;
+
+ IPW_DEBUG_INFO("Power cycling the hardware.\n");
+
+ ipw2100_hw_set_gpio(priv);
+
+ /* Step 1. Stop Master Assert */
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_STOP_MASTER);
+
+ /* Step 2. Wait for stop Master Assert
+ * (not more then 50us, otherwise ret error */
+ i = 5;
+ do {
+ udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
+ read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
+
+ if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
+ break;
+ } while(i--);
+
+ priv->status &= ~STATUS_RESET_PENDING;
+
+ if (!i) {
+ IPW_DEBUG_INFO("exit - waited too long for master assert stop\n");
+ return -EIO;
+ }
+
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_SW_RESET);
+
+
+ /* Reset any fatal_error conditions */
+ ipw2100_reset_fatalerror(priv);
+
+ /* At this point, the adapter is now stopped and disabled */
+ priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
+ STATUS_ASSOCIATED | STATUS_ENABLED);
+
+ return 0;
+}
+
+/*
+ * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
+ *
+ * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
+ *
+ * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
+ * if STATUS_ASSN_LOST is sent.
+ */
+static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
+{
+
+#define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
+
+ struct host_command cmd = {
+ .host_command = CARD_DISABLE_PHY_OFF,
+ .host_command_sequence = 0,
+ .host_command_length = 0,
+ };
+ int err, i;
+ u32 val1, val2;
+
+ IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
+
+ /* Turn off the radio */
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ for (i = 0; i < 2500; i++) {
+ read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
+ read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
+
+ if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
+ (val2 & IPW2100_COMMAND_PHY_OFF))
+ return 0;
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HW_PHY_OFF_LOOP_DELAY);
+ }
+
+ return -EIO;
+}
+
+
+static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = HOST_COMPLETE,
+ .host_command_sequence = 0,
+ .host_command_length = 0
+ };
+ int err = 0;
+
+ IPW_DEBUG_HC("HOST_COMPLETE\n");
+
+ if (priv->status & STATUS_ENABLED)
+ return 0;
+
+ down(&priv->adapter_sem);
+
+ if (rf_kill_active(priv)) {
+ IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
+ goto fail_up;
+ }
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err) {
+ IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
+ goto fail_up;
+ }
+
+ err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
+ if (err) {
+ IPW_DEBUG_INFO(
+ "%s: card not responding to init command.\n",
+ priv->net_dev->name);
+ goto fail_up;
+ }
+
+ if (priv->stop_hang_check) {
+ priv->stop_hang_check = 0;
+ queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
+ }
+
+fail_up:
+ up(&priv->adapter_sem);
+ return err;
+}
+
+static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
+{
+#define HW_POWER_DOWN_DELAY (HZ / 10)
+
+ struct host_command cmd = {
+ .host_command = HOST_PRE_POWER_DOWN,
+ .host_command_sequence = 0,
+ .host_command_length = 0,
+ };
+ int err, i;
+ u32 reg;
+
+ if (!(priv->status & STATUS_RUNNING))
+ return 0;
+
+ priv->status |= STATUS_STOPPING;
+
+ /* We can only shut down the card if the firmware is operational. So,
+ * if we haven't reset since a fatal_error, then we can not send the
+ * shutdown commands. */
+ if (!priv->fatal_error) {
+ /* First, make sure the adapter is enabled so that the PHY_OFF
+ * command can shut it down */
+ ipw2100_enable_adapter(priv);
+
+ err = ipw2100_hw_phy_off(priv);
+ if (err)
+ IPW_DEBUG_WARNING("Error disabling radio %d\n", err);
+
+ /*
+ * If in D0-standby mode going directly to D3 may cause a
+ * PCI bus violation. Therefore we must change out of the D0
+ * state.
+ *
+ * Sending the PREPARE_FOR_POWER_DOWN will restrict the
+ * hardware from going into standby mode and will transition
+ * out of D0-standy if it is already in that state.
+ *
+ * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
+ * driver upon completion. Once received, the driver can
+ * proceed to the D3 state.
+ *
+ * Prepare for power down command to fw. This command would
+ * take HW out of D0-standby and prepare it for D3 state.
+ *
+ * Currently FW does not support event notification for this
+ * event. Therefore, skip waiting for it. Just wait a fixed
+ * 100ms
+ */
+ IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ IPW_DEBUG_WARNING(
+ "%s: Power down command failed: Error %d\n",
+ priv->net_dev->name, err);
+ else {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(HW_POWER_DOWN_DELAY);
+ }
+ }
+
+ priv->status &= ~STATUS_ENABLED;
+
+ /*
+ * Set GPIO 3 writable by FW; GPIO 1 writable
+ * by driver and enable clock
+ */
+ ipw2100_hw_set_gpio(priv);
+
+ /*
+ * Power down adapter. Sequence:
+ * 1. Stop master assert (RESET_REG[9]=1)
+ * 2. Wait for stop master (RESET_REG[8]==1)
+ * 3. S/w reset assert (RESET_REG[7] = 1)
+ */
+
+ /* Stop master assert */
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_STOP_MASTER);
+
+ /* wait stop master not more than 50 usec.
+ * Otherwise return error. */
+ for (i = 5; i > 0; i--) {
+ udelay(10);
+
+ /* Check master stop bit */
+ read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
+
+ if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
+ break;
+ }
+
+ if (i == 0)
+ IPW_DEBUG_WARNING(DRV_NAME
+ ": %s: Could now power down adapter.\n",
+ priv->net_dev->name);
+
+ /* assert s/w reset */
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_SW_RESET);
+
+ priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
+
+ return 0;
+}
+
+
+static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = CARD_DISABLE,
+ .host_command_sequence = 0,
+ .host_command_length = 0
+ };
+ int err = 0;
+
+ IPW_DEBUG_HC("CARD_DISABLE\n");
+
+ if (!(priv->status & STATUS_ENABLED))
+ return 0;
+
+ /* Make sure we clear the associated state */
+ priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+
+ if (!priv->stop_hang_check) {
+ priv->stop_hang_check = 1;
+ cancel_delayed_work(&priv->hang_check);
+ }
+
+ down(&priv->adapter_sem);
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err) {
+ IPW_DEBUG_WARNING("exit - failed to send CARD_DISABLE command\n");
+ goto fail_up;
+ }
+
+ err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
+ if (err) {
+ IPW_DEBUG_WARNING("exit - card failed to change to DISABLED\n");
+ goto fail_up;
+ }
+
+ IPW_DEBUG_INFO("TODO: implement scan state machine\n");
+
+fail_up:
+ up(&priv->adapter_sem);
+ return err;
+}
+
+int ipw2100_set_scan_options(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = SET_SCAN_OPTIONS,
+ .host_command_sequence = 0,
+ .host_command_length = 8
+ };
+ int err;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ IPW_DEBUG_SCAN("setting scan options\n");
+
+ cmd.host_command_parameters[0] = 0;
+
+ if (!(priv->config & CFG_ASSOCIATE))
+ cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
+ if ((priv->sec.flags & SEC_ENABLED) && priv->sec.enabled)
+ cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
+ if (priv->config & CFG_PASSIVE_SCAN)
+ cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
+
+ cmd.host_command_parameters[1] = priv->channel_mask;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
+ cmd.host_command_parameters[0]);
+
+ return err;
+}
+
+int ipw2100_start_scan(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = BROADCAST_SCAN,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ IPW_DEBUG_HC("START_SCAN\n");
+
+ cmd.host_command_parameters[0] = 0;
+
+ /* No scanning if in monitor mode */
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+ return 1;
+
+ if (priv->status & STATUS_SCANNING) {
+ IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
+ return 0;
+ }
+
+ IPW_DEBUG_INFO("enter\n");
+
+ /* Not clearing here; doing so makes iwlist always return nothing...
+ *
+ * We should modify the table logic to use aging tables vs. clearing
+ * the table on each scan start.
+ */
+ IPW_DEBUG_SCAN("starting scan\n");
+
+ priv->status |= STATUS_SCANNING;
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ priv->status &= ~STATUS_SCANNING;
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return err;
+}
+
+static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
+{
+ unsigned long flags;
+ int rc = 0;
+ u32 lock;
+ u32 ord_len = sizeof(lock);
+
+ /* Quite if manually disabled. */
+ if (priv->status & STATUS_RF_KILL_SW) {
+ IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
+ "switch\n", priv->net_dev->name);
+ return 0;
+ }
+
+ /* If the interrupt is enabled, turn it off... */
+ spin_lock_irqsave(&priv->low_lock, flags);
+ ipw2100_disable_interrupts(priv);
+
+ /* Reset any fatal_error conditions */
+ ipw2100_reset_fatalerror(priv);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ if (priv->status & STATUS_POWERED ||
+ (priv->status & STATUS_RESET_PENDING)) {
+ /* Power cycle the card ... */
+ if (ipw2100_power_cycle_adapter(priv)) {
+ IPW_DEBUG_WARNING("%s: Could not cycle adapter.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+ } else
+ priv->status |= STATUS_POWERED;
+
+ /* Load the firmeware, start the clocks, etc. */
+ if (ipw2100_start_adapter(priv)) {
+ IPW_DEBUG_ERROR("%s: Failed to start the firmware.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+
+ ipw2100_initialize_ordinals(priv);
+
+ /* Determine capabilities of this particular HW configuration */
+ if (ipw2100_get_hw_features(priv)) {
+ IPW_DEBUG_ERROR("%s: Failed to determine HW features.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+
+ lock = LOCK_NONE;
+ if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
+ IPW_DEBUG_ERROR("%s: Failed to clear ordinal lock.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+
+ priv->status &= ~STATUS_SCANNING;
+
+ if (rf_kill_active(priv)) {
+ printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
+ priv->net_dev->name);
+
+ if (priv->stop_rf_kill) {
+ priv->stop_rf_kill = 0;
+ queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
+ }
+
+ deferred = 1;
+ }
+
+ /* Turn on the interrupt so that commands can be processed */
+ ipw2100_enable_interrupts(priv);
+
+ /* Send all of the commands that must be sent prior to
+ * HOST_COMPLETE */
+ if (ipw2100_adapter_setup(priv)) {
+ IPW_DEBUG_ERROR("%s: Failed to start the card.\n",
+ priv->net_dev->name);
+ rc = 1;
+ goto exit;
+ }
+
+ if (!deferred) {
+ /* Enable the adapter - sends HOST_COMPLETE */
+ if (ipw2100_enable_adapter(priv)) {
+ IPW_DEBUG_ERROR(
+ "%s: failed in call to enable adapter.\n",
+ priv->net_dev->name);
+ ipw2100_hw_stop_adapter(priv);
+ rc = 1;
+ goto exit;
+ }
+
+
+ /* Start a scan . . . */
+ ipw2100_set_scan_options(priv);
+ ipw2100_start_scan(priv);
+ }
+
+ exit:
+ return rc;
+}
+
+/* Called by register_netdev() */
+static int ipw2100_net_init(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return ipw2100_up(priv, 1);
+}
+
+static void ipw2100_down(struct ipw2100_priv *priv)
+{
+ unsigned long flags;
+ union iwreq_data wrqu = {
+ .ap_addr = {
+ .sa_family = ARPHRD_ETHER
+ }
+ };
+ int associated = priv->status & STATUS_ASSOCIATED;
+
+ /* Kill the RF switch timer */
+ if (!priv->stop_rf_kill) {
+ priv->stop_rf_kill = 1;
+ cancel_delayed_work(&priv->rf_kill);
+ }
+
+ /* Kill the firmare hang check timer */
+ if (!priv->stop_hang_check) {
+ priv->stop_hang_check = 1;
+ cancel_delayed_work(&priv->hang_check);
+ }
+
+ /* Kill any pending resets */
+ if (priv->status & STATUS_RESET_PENDING)
+ cancel_delayed_work(&priv->reset_work);
+
+ /* Make sure the interrupt is on so that FW commands will be
+ * processed correctly */
+ spin_lock_irqsave(&priv->low_lock, flags);
+ ipw2100_enable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ if (ipw2100_hw_stop_adapter(priv))
+ IPW_DEBUG_ERROR("%s: Error stopping adapter.\n",
+ priv->net_dev->name);
+
+ /* Do not disable the interrupt until _after_ we disable
+ * the adaptor. Otherwise the CARD_DISABLE command will never
+ * be ack'd by the firmware */
+ spin_lock_irqsave(&priv->low_lock, flags);
+ ipw2100_disable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+ if (priv->config & CFG_C3_DISABLED) {
+ IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n");
+ acpi_set_cstate_limit(priv->cstate_limit);
+ priv->config &= ~CFG_C3_DISABLED;
+ }
+#endif
+
+ /* We have to signal any supplicant if we are disassociating */
+ if (associated)
+ wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+
+ priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+}
+
+void ipw2100_reset_adapter(struct ipw2100_priv *priv)
+{
+ unsigned long flags;
+ union iwreq_data wrqu = {
+ .ap_addr = {
+ .sa_family = ARPHRD_ETHER
+ }
+ };
+ int associated = priv->status & STATUS_ASSOCIATED;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+ IPW_DEBUG_INFO(DRV_NAME ": %s: Restarting adapter.\n",
+ priv->net_dev->name);
+ priv->resets++;
+ priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+ priv->status |= STATUS_SECURITY_UPDATED;
+
+ /* Force a power cycle even if interface hasn't been opened
+ * yet */
+ cancel_delayed_work(&priv->reset_work);
+ priv->status |= STATUS_RESET_PENDING;
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ down(&priv->action_sem);
+ /* stop timed checks so that they don't interfere with reset */
+ priv->stop_hang_check = 1;
+ cancel_delayed_work(&priv->hang_check);
+
+ /* We have to signal any supplicant if we are disassociating */
+ if (associated)
+ wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+
+ ipw2100_up(priv, 0);
+ up(&priv->action_sem);
+
+}
+
+
+static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
+{
+
+#define MAC_ASSOCIATION_READ_DELAY (HZ)
+ int ret, len, essid_len;
+ char essid[IW_ESSID_MAX_SIZE];
+ u32 txrate;
+ u32 chan;
+ char *txratename;
+ u8 bssid[ETH_ALEN];
+
+ /*
+ * TBD: BSSID is usually 00:00:00:00:00:00 here and not
+ * an actual MAC of the AP. Seems like FW sets this
+ * address too late. Read it later and expose through
+ * /proc or schedule a later task to query and update
+ */
+
+ essid_len = IW_ESSID_MAX_SIZE;
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
+ essid, &essid_len);
+ if (ret) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return;
+ }
+
+ len = sizeof(u32);
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE,
+ &txrate, &len);
+ if (ret) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return;
+ }
+
+ len = sizeof(u32);
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
+ if (ret) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return;
+ }
+ len = ETH_ALEN;
+ ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
+ if (ret) {
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+ return;
+ }
+ memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
+
+
+ switch (txrate) {
+ case TX_RATE_1_MBIT:
+ txratename = "1Mbps";
+ break;
+ case TX_RATE_2_MBIT:
+ txratename = "2Mbsp";
+ break;
+ case TX_RATE_5_5_MBIT:
+ txratename = "5.5Mbps";
+ break;
+ case TX_RATE_11_MBIT:
+ txratename = "11Mbps";
+ break;
+ default:
+ IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
+ txratename = "unknown rate";
+ break;
+ }
+
+ IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID="
+ MAC_FMT ")\n",
+ priv->net_dev->name, escape_essid(essid, essid_len),
+ txratename, chan, MAC_ARG(bssid));
+
+ /* now we copy read ssid into dev */
+ if (!(priv->config & CFG_STATIC_ESSID)) {
+ priv->essid_len = min((u8)essid_len, (u8)IW_ESSID_MAX_SIZE);
+ memcpy(priv->essid, essid, priv->essid_len);
+ }
+ priv->channel = chan;
+ memcpy(priv->bssid, bssid, ETH_ALEN);
+
+ priv->status |= STATUS_ASSOCIATING;
+ priv->connect_start = get_seconds();
+
+ queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10);
+}
+
+
+int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
+ int length, int batch_mode)
+{
+ int ssid_len = min(length, IW_ESSID_MAX_SIZE);
+ struct host_command cmd = {
+ .host_command = SSID,
+ .host_command_sequence = 0,
+ .host_command_length = ssid_len
+ };
+ int err;
+
+ IPW_DEBUG_HC("SSID: '%s'\n", escape_essid(essid, ssid_len));
+
+ if (ssid_len)
+ memcpy((char*)cmd.host_command_parameters,
+ essid, ssid_len);
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
+ * disable auto association -- so we cheat by setting a bogus SSID */
+ if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
+ int i;
+ u8 *bogus = (u8*)cmd.host_command_parameters;
+ for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
+ bogus[i] = 0x18 + i;
+ cmd.host_command_length = IW_ESSID_MAX_SIZE;
+ }
+
+ /* NOTE: We always send the SSID command even if the provided ESSID is
+ * the same as what we currently think is set. */
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (!err) {
+ memset(priv->essid + ssid_len, 0,
+ IW_ESSID_MAX_SIZE - ssid_len);
+ memcpy(priv->essid, essid, ssid_len);
+ priv->essid_len = ssid_len;
+ }
+
+ if (!batch_mode) {
+ if (ipw2100_enable_adapter(priv))
+ err = -EIO;
+ }
+
+ return err;
+}
+
+static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
+{
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "disassociated: '%s' " MAC_FMT " \n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid));
+
+ priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+
+ if (priv->status & STATUS_STOPPING) {
+ IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
+ return;
+ }
+
+ memset(priv->bssid, 0, ETH_ALEN);
+ memset(priv->ieee->bssid, 0, ETH_ALEN);
+
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+
+ if (!(priv->status & STATUS_RUNNING))
+ return;
+
+ if (priv->status & STATUS_SECURITY_UPDATED)
+ queue_work(priv->workqueue, &priv->security_work);
+
+ queue_work(priv->workqueue, &priv->wx_event_work);
+}
+
+static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
+{
+ IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
+ priv->net_dev->name);
+
+ /* RF_KILL is now enabled (else we wouldn't be here) */
+ priv->status |= STATUS_RF_KILL_HW;
+
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+ if (priv->config & CFG_C3_DISABLED) {
+ IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n");
+ acpi_set_cstate_limit(priv->cstate_limit);
+ priv->config &= ~CFG_C3_DISABLED;
+ }
+#endif
+
+ /* Make sure the RF Kill check timer is running */
+ priv->stop_rf_kill = 0;
+ cancel_delayed_work(&priv->rf_kill);
+ queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
+}
+
+static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
+{
+ IPW_DEBUG_SCAN("scan complete\n");
+ /* Age the scan results... */
+ priv->ieee->scans++;
+ priv->status &= ~STATUS_SCANNING;
+}
+
+#ifdef CONFIG_IPW_DEBUG
+#define IPW2100_HANDLER(v, f) { v, f, # v }
+struct ipw2100_status_indicator {
+ int status;
+ void (*cb)(struct ipw2100_priv *priv, u32 status);
+ char *name;
+};
+#else
+#define IPW2100_HANDLER(v, f) { v, f }
+struct ipw2100_status_indicator {
+ int status;
+ void (*cb)(struct ipw2100_priv *priv, u32 status);
+};
+#endif /* CONFIG_IPW_DEBUG */
+
+static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
+{
+ IPW_DEBUG_SCAN("Scanning...\n");
+ priv->status |= STATUS_SCANNING;
+}
+
+const struct ipw2100_status_indicator status_handlers[] = {
+ IPW2100_HANDLER(IPW_STATE_INITIALIZED, 0),
+ IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, 0),
+ IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
+ IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
+ IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, 0),
+ IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
+ IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, 0),
+ IPW2100_HANDLER(IPW_STATE_LEFT_PSP, 0),
+ IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
+ IPW2100_HANDLER(IPW_STATE_DISABLED, 0),
+ IPW2100_HANDLER(IPW_STATE_POWER_DOWN, 0),
+ IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
+ IPW2100_HANDLER(-1, 0)
+};
+
+
+static void isr_status_change(struct ipw2100_priv *priv, int status)
+{
+ int i;
+
+ if (status == IPW_STATE_SCANNING &&
+ priv->status & STATUS_ASSOCIATED &&
+ !(priv->status & STATUS_SCANNING)) {
+ IPW_DEBUG_INFO("Scan detected while associated, with "
+ "no scan request. Restarting firmware.\n");
+
+ /* Wake up any sleeping jobs */
+ schedule_reset(priv);
+ }
+
+ for (i = 0; status_handlers[i].status != -1; i++) {
+ if (status == status_handlers[i].status) {
+ IPW_DEBUG_NOTIF("Status change: %s\n",
+ status_handlers[i].name);
+ if (status_handlers[i].cb)
+ status_handlers[i].cb(priv, status);
+ priv->wstats.status = status;
+ return;
+ }
+ }
+
+ IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
+}
+
+static void isr_rx_complete_command(
+ struct ipw2100_priv *priv,
+ struct ipw2100_cmd_header *cmd)
+{
+#ifdef CONFIG_IPW_DEBUG
+ if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
+ IPW_DEBUG_HC("Command completed '%s (%d)'\n",
+ command_types[cmd->host_command_reg],
+ cmd->host_command_reg);
+ }
+#endif
+ if (cmd->host_command_reg == HOST_COMPLETE)
+ priv->status |= STATUS_ENABLED;
+
+ if (cmd->host_command_reg == CARD_DISABLE)
+ priv->status &= ~STATUS_ENABLED;
+
+ priv->status &= ~STATUS_CMD_ACTIVE;
+
+ wake_up_interruptible(&priv->wait_command_queue);
+}
+
+#ifdef CONFIG_IPW_DEBUG
+const char *frame_types[] = {
+ "COMMAND_STATUS_VAL",
+ "STATUS_CHANGE_VAL",
+ "P80211_DATA_VAL",
+ "P8023_DATA_VAL",
+ "HOST_NOTIFICATION_VAL"
+};
+#endif
+
+
+static inline int ipw2100_alloc_skb(
+ struct ipw2100_priv *priv,
+ struct ipw2100_rx_packet *packet)
+{
+ packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
+ if (!packet->skb)
+ return -ENOMEM;
+
+ packet->rxp = (struct ipw2100_rx *)packet->skb->data;
+ packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
+ sizeof(struct ipw2100_rx),
+ PCI_DMA_FROMDEVICE);
+ /* NOTE: pci_map_single does not return an error code, and 0 is a valid
+ * dma_addr */
+
+ return 0;
+}
+
+
+#define SEARCH_ERROR 0xffffffff
+#define SEARCH_FAIL 0xfffffffe
+#define SEARCH_SUCCESS 0xfffffff0
+#define SEARCH_DISCARD 0
+#define SEARCH_SNAPSHOT 1
+
+#define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
+static inline int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
+{
+ int i;
+ if (priv->snapshot[0])
+ return 1;
+ for (i = 0; i < 0x30; i++) {
+ priv->snapshot[i] = (u8*)kmalloc(0x1000, GFP_ATOMIC);
+ if (!priv->snapshot[i]) {
+ IPW_DEBUG_INFO("%s: Error allocating snapshot "
+ "buffer %d\n", priv->net_dev->name, i);
+ while (i > 0)
+ kfree(priv->snapshot[--i]);
+ priv->snapshot[0] = NULL;
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static inline void ipw2100_snapshot_free(struct ipw2100_priv *priv)
+{
+ int i;
+ if (!priv->snapshot[0])
+ return;
+ for (i = 0; i < 0x30; i++)
+ kfree(priv->snapshot[i]);
+ priv->snapshot[0] = NULL;
+}
+
+static inline u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 *in_buf,
+ size_t len, int mode)
+{
+ u32 i, j;
+ u32 tmp;
+ u8 *s, *d;
+ u32 ret;
+
+ s = in_buf;
+ if (mode == SEARCH_SNAPSHOT) {
+ if (!ipw2100_snapshot_alloc(priv))
+ mode = SEARCH_DISCARD;
+ }
+
+ for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
+ read_nic_dword(priv->net_dev, i, &tmp);
+ if (mode == SEARCH_SNAPSHOT)
+ *(u32 *)SNAPSHOT_ADDR(i) = tmp;
+ if (ret == SEARCH_FAIL) {
+ d = (u8*)&tmp;
+ for (j = 0; j < 4; j++) {
+ if (*s != *d) {
+ s = in_buf;
+ continue;
+ }
+
+ s++;
+ d++;
+
+ if ((s - in_buf) == len)
+ ret = (i + j) - len + 1;
+ }
+ } else if (mode == SEARCH_DISCARD)
+ return ret;
+ }
+
+ return ret;
+}
+
+/*
+ *
+ * 0) Disconnect the SKB from the firmware (just unmap)
+ * 1) Pack the ETH header into the SKB
+ * 2) Pass the SKB to the network stack
+ *
+ * When packet is provided by the firmware, it contains the following:
+ *
+ * . ieee80211_hdr
+ * . ieee80211_snap_hdr
+ *
+ * The size of the constructed ethernet
+ *
+ */
+#ifdef CONFIG_IPW2100_RX_DEBUG
+u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
+#endif
+
+static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv,
+ int i)
+{
+#ifdef CONFIG_IPW_DEBUG_C3
+ struct ipw2100_status *status = &priv->status_queue.drv[i];
+ u32 match, reg;
+ int j;
+#endif
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+ int limit;
+#endif
+
+ IPW_DEBUG_INFO(DRV_NAME ": PCI latency error detected at "
+ "0x%04X.\n", i * sizeof(struct ipw2100_status));
+
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+ IPW_DEBUG_INFO(DRV_NAME ": Disabling C3 transitions.\n");
+ limit = acpi_get_cstate_limit();
+ if (limit > 2) {
+ priv->cstate_limit = limit;
+ acpi_set_cstate_limit(2);
+ priv->config |= CFG_C3_DISABLED;
+ }
+#endif
+
+#ifdef CONFIG_IPW_DEBUG_C3
+ /* Halt the fimrware so we can get a good image */
+ write_register(priv->net_dev, IPW_REG_RESET_REG,
+ IPW_AUX_HOST_RESET_REG_STOP_MASTER);
+ j = 5;
+ do {
+ udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
+ read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
+
+ if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
+ break;
+ } while (j--);
+
+ match = ipw2100_match_buf(priv, (u8*)status,
+ sizeof(struct ipw2100_status),
+ SEARCH_SNAPSHOT);
+ if (match < SEARCH_SUCCESS)
+ IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
+ "offset 0x%06X, length %d:\n",
+ priv->net_dev->name, match,
+ sizeof(struct ipw2100_status));
+ else
+ IPW_DEBUG_INFO("%s: No DMA status match in "
+ "Firmware.\n", priv->net_dev->name);
+
+ printk_buf((u8*)priv->status_queue.drv,
+ sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
+#endif
+
+ priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
+ priv->ieee->stats.rx_errors++;
+ schedule_reset(priv);
+}
+
+static inline void isr_rx(struct ipw2100_priv *priv, int i,
+ struct ieee80211_rx_stats *stats)
+{
+ struct ipw2100_status *status = &priv->status_queue.drv[i];
+ struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
+
+ IPW_DEBUG_RX("Handler...\n");
+
+ if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
+ IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
+ " Dropping.\n",
+ priv->net_dev->name,
+ status->frame_size, skb_tailroom(packet->skb));
+ priv->ieee->stats.rx_errors++;
+ return;
+ }
+
+ if (unlikely(!netif_running(priv->net_dev))) {
+ priv->ieee->stats.rx_errors++;
+ priv->wstats.discard.misc++;
+ IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
+ return;
+ }
+
+ if (unlikely(priv->ieee->iw_mode == IW_MODE_MONITOR &&
+ status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
+ IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
+ priv->ieee->stats.rx_errors++;
+ return;
+ }
+
+ if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
+ !(priv->status & STATUS_ASSOCIATED))) {
+ IPW_DEBUG_DROP("Dropping packet while not associated.\n");
+ priv->wstats.discard.misc++;
+ return;
+ }
+
+
+ pci_unmap_single(priv->pci_dev,
+ packet->dma_addr,
+ sizeof(struct ipw2100_rx),
+ PCI_DMA_FROMDEVICE);
+
+ skb_put(packet->skb, status->frame_size);
+
+#ifdef CONFIG_IPW2100_RX_DEBUG
+ /* Make a copy of the frame so we can dump it to the logs if
+ * ieee80211_rx fails */
+ memcpy(packet_data, packet->skb->data,
+ min(status->frame_size, IPW_RX_NIC_BUFFER_LENGTH));
+#endif
+
+ if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
+#ifdef CONFIG_IPW2100_RX_DEBUG
+ IPW_DEBUG_DROP("%s: Non consumed packet:\n",
+ priv->net_dev->name);
+ printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
+#endif
+ priv->ieee->stats.rx_errors++;
+
+ /* ieee80211_rx failed, so it didn't free the SKB */
+ dev_kfree_skb_any(packet->skb);
+ packet->skb = NULL;
+ }
+
+ /* We need to allocate a new SKB and attach it to the RDB. */
+ if (unlikely(ipw2100_alloc_skb(priv, packet))) {
+ IPW_DEBUG_WARNING(
+ "%s: Unable to allocate SKB onto RBD ring - disabling "
+ "adapter.\n", priv->net_dev->name);
+ /* TODO: schedule adapter shutdown */
+ IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
+ }
+
+ /* Update the RDB entry */
+ priv->rx_queue.drv[i].host_addr = packet->dma_addr;
+}
+
+static inline int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
+{
+ struct ipw2100_status *status = &priv->status_queue.drv[i];
+ struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
+ u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
+
+ switch (frame_type) {
+ case COMMAND_STATUS_VAL:
+ return (status->frame_size != sizeof(u->rx_data.command));
+ case STATUS_CHANGE_VAL:
+ return (status->frame_size != sizeof(u->rx_data.status));
+ case HOST_NOTIFICATION_VAL:
+ return (status->frame_size < sizeof(u->rx_data.notification));
+ case P80211_DATA_VAL:
+ case P8023_DATA_VAL:
+#ifdef CONFIG_IPW2100_MONITOR
+ return 0;
+#else
+ switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) {
+ case IEEE80211_FTYPE_MGMT:
+ case IEEE80211_FTYPE_CTL:
+ return 0;
+ case IEEE80211_FTYPE_DATA:
+ return (status->frame_size >
+ IPW_MAX_802_11_PAYLOAD_LENGTH);
+ }
+#endif
+ }
+
+ return 1;
+}
+
+/*
+ * ipw2100 interrupts are disabled at this point, and the ISR
+ * is the only code that calls this method. So, we do not need
+ * to play with any locks.
+ *
+ * RX Queue works as follows:
+ *
+ * Read index - firmware places packet in entry identified by the
+ * Read index and advances Read index. In this manner,
+ * Read index will always point to the next packet to
+ * be filled--but not yet valid.
+ *
+ * Write index - driver fills this entry with an unused RBD entry.
+ * This entry has not filled by the firmware yet.
+ *
+ * In between the W and R indexes are the RBDs that have been received
+ * but not yet processed.
+ *
+ * The process of handling packets will start at WRITE + 1 and advance
+ * until it reaches the READ index.
+ *
+ * The WRITE index is cached in the variable 'priv->rx_queue.next'.
+ *
+ */
+static inline void __ipw2100_rx_process(struct ipw2100_priv *priv)
+{
+ struct ipw2100_bd_queue *rxq = &priv->rx_queue;
+ struct ipw2100_status_queue *sq = &priv->status_queue;
+ struct ipw2100_rx_packet *packet;
+ u16 frame_type;
+ u32 r, w, i, s;
+ struct ipw2100_rx *u;
+ struct ieee80211_rx_stats stats = {
+ .mac_time = jiffies,
+ };
+
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
+
+ if (r >= rxq->entries) {
+ IPW_DEBUG_RX("exit - bad read index\n");
+ return;
+ }
+
+ i = (rxq->next + 1) % rxq->entries;
+ s = i;
+ while (i != r) {
+ /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
+ r, rxq->next, i); */
+
+ packet = &priv->rx_buffers[i];
+
+ /* Sync the DMA for the STATUS buffer so CPU is sure to get
+ * the correct values */
+ pci_dma_sync_single_for_cpu(
+ priv->pci_dev,
+ sq->nic + sizeof(struct ipw2100_status) * i,
+ sizeof(struct ipw2100_status),
+ PCI_DMA_FROMDEVICE);
+
+ /* Sync the DMA for the RX buffer so CPU is sure to get
+ * the correct values */
+ pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
+ sizeof(struct ipw2100_rx),
+ PCI_DMA_FROMDEVICE);
+
+ if (unlikely(ipw2100_corruption_check(priv, i))) {
+ ipw2100_corruption_detected(priv, i);
+ goto increment;
+ }
+
+ u = packet->rxp;
+ frame_type = sq->drv[i].status_fields &
+ STATUS_TYPE_MASK;
+ stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
+ stats.len = sq->drv[i].frame_size;
+
+ stats.mask = 0;
+ if (stats.rssi != 0)
+ stats.mask |= IEEE80211_STATMASK_RSSI;
+ stats.freq = IEEE80211_24GHZ_BAND;
+
+ IPW_DEBUG_RX(
+ "%s: '%s' frame type received (%d).\n",
+ priv->net_dev->name, frame_types[frame_type],
+ stats.len);
+
+ switch (frame_type) {
+ case COMMAND_STATUS_VAL:
+ /* Reset Rx watchdog */
+ isr_rx_complete_command(
+ priv, &u->rx_data.command);
+ break;
+
+ case STATUS_CHANGE_VAL:
+ isr_status_change(priv, u->rx_data.status);
+ break;
+
+ case P80211_DATA_VAL:
+ case P8023_DATA_VAL:
+#ifdef CONFIG_IPW2100_MONITOR
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+ isr_rx(priv, i, &stats);
+ break;
+ }
+#endif
+ if (stats.len < sizeof(u->rx_data.header))
+ break;
+ switch (WLAN_FC_GET_TYPE(u->rx_data.header.
+ frame_ctl)) {
+ case IEEE80211_FTYPE_MGMT:
+ ieee80211_rx_mgt(priv->ieee,
+ &u->rx_data.header,
+ &stats);
+ break;
+
+ case IEEE80211_FTYPE_CTL:
+ break;
+
+ case IEEE80211_FTYPE_DATA:
+ isr_rx(priv, i, &stats);
+ break;
+
+ }
+ break;
+ }
+
+ increment:
+ /* clear status field associated with this RBD */
+ rxq->drv[i].status.info.field = 0;
+
+ i = (i + 1) % rxq->entries;
+ }
+
+ if (i != s) {
+ /* backtrack one entry, wrapping to end if at 0 */
+ rxq->next = (i ? i : rxq->entries) - 1;
+
+ write_register(priv->net_dev,
+ IPW_MEM_HOST_SHARED_RX_WRITE_INDEX,
+ rxq->next);
+ }
+}
+
+
+/*
+ * __ipw2100_tx_process
+ *
+ * This routine will determine whether the next packet on
+ * the fw_pend_list has been processed by the firmware yet.
+ *
+ * If not, then it does nothing and returns.
+ *
+ * If so, then it removes the item from the fw_pend_list, frees
+ * any associated storage, and places the item back on the
+ * free list of its source (either msg_free_list or tx_free_list)
+ *
+ * TX Queue works as follows:
+ *
+ * Read index - points to the next TBD that the firmware will
+ * process. The firmware will read the data, and once
+ * done processing, it will advance the Read index.
+ *
+ * Write index - driver fills this entry with an constructed TBD
+ * entry. The Write index is not advanced until the
+ * packet has been configured.
+ *
+ * In between the W and R indexes are the TBDs that have NOT been
+ * processed. Lagging behind the R index are packets that have
+ * been processed but have not been freed by the driver.
+ *
+ * In order to free old storage, an internal index will be maintained
+ * that points to the next packet to be freed. When all used
+ * packets have been freed, the oldest index will be the same as the
+ * firmware's read index.
+ *
+ * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
+ *
+ * Because the TBD structure can not contain arbitrary data, the
+ * driver must keep an internal queue of cached allocations such that
+ * it can put that data back into the tx_free_list and msg_free_list
+ * for use by future command and data packets.
+ *
+ */
+static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
+{
+ struct ipw2100_bd_queue *txq = &priv->tx_queue;
+ struct ipw2100_bd *tbd;
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ int descriptors_used;
+ int e, i;
+ u32 r, w, frag_num = 0;
+
+ if (list_empty(&priv->fw_pend_list))
+ return 0;
+
+ element = priv->fw_pend_list.next;
+
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+ tbd = &txq->drv[packet->index];
+
+ /* Determine how many TBD entries must be finished... */
+ switch (packet->type) {
+ case COMMAND:
+ /* COMMAND uses only one slot; don't advance */
+ descriptors_used = 1;
+ e = txq->oldest;
+ break;
+
+ case DATA:
+ /* DATA uses two slots; advance and loop position. */
+ descriptors_used = tbd->num_fragments;
+ frag_num = tbd->num_fragments - 1;
+ e = txq->oldest + frag_num;
+ e %= txq->entries;
+ break;
+
+ default:
+ IPW_DEBUG_WARNING("%s: Bad fw_pend_list entry!\n",
+ priv->net_dev->name);
+ return 0;
+ }
+
+ /* if the last TBD is not done by NIC yet, then packet is
+ * not ready to be released.
+ *
+ */
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
+ &r);
+ read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
+ &w);
+ if (w != txq->next)
+ IPW_DEBUG_WARNING("%s: write index mismatch\n",
+ priv->net_dev->name);
+
+ /*
+ * txq->next is the index of the last packet written txq->oldest is
+ * the index of the r is the index of the next packet to be read by
+ * firmware
+ */
+
+
+ /*
+ * Quick graphic to help you visualize the following
+ * if / else statement
+ *
+ * ===>| s---->|===============
+ * e>|
+ * | a | b | c | d | e | f | g | h | i | j | k | l
+ * r---->|
+ * w
+ *
+ * w - updated by driver
+ * r - updated by firmware
+ * s - start of oldest BD entry (txq->oldest)
+ * e - end of oldest BD entry
+ *
+ */
+ if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
+ IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
+ return 0;
+ }
+
+ list_del(element);
+ DEC_STAT(&priv->fw_pend_stat);
+
+#ifdef CONFIG_IPW_DEBUG
+ {
+ int i = txq->oldest;
+ IPW_DEBUG_TX(
+ "TX%d V=%p P=%p T=%p L=%d\n", i,
+ &txq->drv[i],
+ (void*)txq->nic + i * sizeof(struct ipw2100_bd),
+ (void*)txq->drv[i].host_addr,
+ txq->drv[i].buf_length);
+
+ if (packet->type == DATA) {
+ i = (i + 1) % txq->entries;
+
+ IPW_DEBUG_TX(
+ "TX%d V=%p P=%p T=%p L=%d\n", i,
+ &txq->drv[i],
+ (void*)txq->nic + i *
+ sizeof(struct ipw2100_bd),
+ (void*)txq->drv[i].host_addr,
+ txq->drv[i].buf_length);
+ }
+ }
+#endif
+
+ switch (packet->type) {
+ case DATA:
+ if (txq->drv[txq->oldest].status.info.fields.txType != 0)
+ IPW_DEBUG_WARNING("%s: Queue mismatch. "
+ "Expecting DATA TBD but pulled "
+ "something else: ids %d=%d.\n",
+ priv->net_dev->name, txq->oldest, packet->index);
+
+ /* DATA packet; we have to unmap and free the SKB */
+ priv->ieee->stats.tx_packets++;
+ for (i = 0; i < frag_num; i++) {
+ tbd = &txq->drv[(packet->index + 1 + i) %
+ txq->entries];
+
+ IPW_DEBUG_TX(
+ "TX%d P=%08x L=%d\n",
+ (packet->index + 1 + i) % txq->entries,
+ tbd->host_addr, tbd->buf_length);
+
+ pci_unmap_single(priv->pci_dev,
+ tbd->host_addr,
+ tbd->buf_length,
+ PCI_DMA_TODEVICE);
+ }
+
+ priv->ieee->stats.tx_bytes += packet->info.d_struct.txb->payload_size;
+ ieee80211_txb_free(packet->info.d_struct.txb);
+ packet->info.d_struct.txb = NULL;
+
+ list_add_tail(element, &priv->tx_free_list);
+ INC_STAT(&priv->tx_free_stat);
+
+ /* We have a free slot in the Tx queue, so wake up the
+ * transmit layer if it is stopped. */
+ if (priv->status & STATUS_ASSOCIATED &&
+ netif_queue_stopped(priv->net_dev)) {
+ IPW_DEBUG_INFO(KERN_INFO
+ "%s: Waking net queue.\n",
+ priv->net_dev->name);
+ netif_wake_queue(priv->net_dev);
+ }
+
+ /* A packet was processed by the hardware, so update the
+ * watchdog */
+ priv->net_dev->trans_start = jiffies;
+
+ break;
+
+ case COMMAND:
+ if (txq->drv[txq->oldest].status.info.fields.txType != 1)
+ IPW_DEBUG_WARNING("%s: Queue mismatch. "
+ "Expecting COMMAND TBD but pulled "
+ "something else: ids %d=%d.\n",
+ priv->net_dev->name, txq->oldest, packet->index);
+
+#ifdef CONFIG_IPW_DEBUG
+ if (packet->info.c_struct.cmd->host_command_reg <
+ sizeof(command_types) / sizeof(*command_types))
+ IPW_DEBUG_TX(
+ "Command '%s (%d)' processed: %d.\n",
+ command_types[packet->info.c_struct.cmd->host_command_reg],
+ packet->info.c_struct.cmd->host_command_reg,
+ packet->info.c_struct.cmd->cmd_status_reg);
+#endif
+
+ list_add_tail(element, &priv->msg_free_list);
+ INC_STAT(&priv->msg_free_stat);
+ break;
+ }
+
+ /* advance oldest used TBD pointer to start of next entry */
+ txq->oldest = (e + 1) % txq->entries;
+ /* increase available TBDs number */
+ txq->available += descriptors_used;
+ SET_STAT(&priv->txq_stat, txq->available);
+
+ IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
+ jiffies - packet->jiffy_start);
+
+ return (!list_empty(&priv->fw_pend_list));
+}
+
+
+static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
+{
+ int i = 0;
+
+ while (__ipw2100_tx_process(priv) && i < 200) i++;
+
+ if (i == 200) {
+ IPW_DEBUG_WARNING(
+ "%s: Driver is running slow (%d iters).\n",
+ priv->net_dev->name, i);
+ }
+}
+
+
+static void X__ipw2100_tx_send_commands(struct ipw2100_priv *priv)
+{
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ struct ipw2100_bd_queue *txq = &priv->tx_queue;
+ struct ipw2100_bd *tbd;
+ int next = txq->next;
+
+ while (!list_empty(&priv->msg_pend_list)) {
+ /* if there isn't enough space in TBD queue, then
+ * don't stuff a new one in.
+ * NOTE: 3 are needed as a command will take one,
+ * and there is a minimum of 2 that must be
+ * maintained between the r and w indexes
+ */
+ if (txq->available <= 3) {
+ IPW_DEBUG_TX("no room in tx_queue\n");
+ break;
+ }
+
+ element = priv->msg_pend_list.next;
+ list_del(element);
+ DEC_STAT(&priv->msg_pend_stat);
+
+ packet = list_entry(element,
+ struct ipw2100_tx_packet, list);
+
+ IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
+ &txq->drv[txq->next],
+ (void*)(txq->nic + txq->next *
+ sizeof(struct ipw2100_bd)));
+
+ packet->index = txq->next;
+
+ tbd = &txq->drv[txq->next];
+
+ /* initialize TBD */
+ tbd->host_addr = packet->info.c_struct.cmd_phys;
+ tbd->buf_length = sizeof(struct ipw2100_cmd_header);
+ /* not marking number of fragments causes problems
+ * with f/w debug version */
+ tbd->num_fragments = 1;
+ tbd->status.info.field =
+ IPW_BD_STATUS_TX_FRAME_COMMAND |
+ IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
+
+ /* update TBD queue counters */
+ txq->next++;
+ txq->next %= txq->entries;
+ txq->available--;
+ DEC_STAT(&priv->txq_stat);
+
+ list_add_tail(element, &priv->fw_pend_list);
+ INC_STAT(&priv->fw_pend_stat);
+ }
+
+ if (txq->next != next) {
+ /* kick off the DMA by notifying firmware the
+ * write index has moved; make sure TBD stores are sync'd */
+ wmb();
+ write_register(priv->net_dev,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
+ txq->next);
+ }
+}
+
+
+/*
+ * X__ipw2100_tx_send_data
+ *
+ */
+static void X__ipw2100_tx_send_data(struct ipw2100_priv *priv)
+{
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ struct ipw2100_bd_queue *txq = &priv->tx_queue;
+ struct ipw2100_bd *tbd;
+ int next = txq->next;
+ int i = 0;
+ struct ipw2100_data_header *ipw_hdr;
+ struct ieee80211_hdr *hdr;
+
+ while (!list_empty(&priv->tx_pend_list)) {
+ /* if there isn't enough space in TBD queue, then
+ * don't stuff a new one in.
+ * NOTE: 4 are needed as a data will take two,
+ * and there is a minimum of 2 that must be
+ * maintained between the r and w indexes
+ */
+ element = priv->tx_pend_list.next;
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+
+ if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
+ IPW_MAX_BDS)) {
+ /* TODO: Support merging buffers if more than
+ * IPW_MAX_BDS are used */
+ IPW_DEBUG_INFO(
+ "%s: Maximum BD theshold exceeded. "
+ "Increase fragmentation level.\n",
+ priv->net_dev->name);
+ }
+
+ if (txq->available <= 3 +
+ packet->info.d_struct.txb->nr_frags) {
+ IPW_DEBUG_TX("no room in tx_queue\n");
+ break;
+ }
+
+ list_del(element);
+ DEC_STAT(&priv->tx_pend_stat);
+
+ tbd = &txq->drv[txq->next];
+
+ packet->index = txq->next;
+
+ ipw_hdr = packet->info.d_struct.data;
+ hdr = (struct ieee80211_hdr *)packet->info.d_struct.txb->
+ fragments[0]->data;
+
+ if (priv->ieee->iw_mode == IW_MODE_INFRA) {
+ /* To DS: Addr1 = BSSID, Addr2 = SA,
+ Addr3 = DA */
+ memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
+ memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
+ } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ /* not From/To DS: Addr1 = DA, Addr2 = SA,
+ Addr3 = BSSID */
+ memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
+ memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
+ }
+
+ ipw_hdr->host_command_reg = SEND;
+ ipw_hdr->host_command_reg1 = 0;
+
+ /* For now we only support host based encryption */
+ ipw_hdr->needs_encryption = 0;
+ ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
+ if (packet->info.d_struct.txb->nr_frags > 1)
+ ipw_hdr->fragment_size =
+ packet->info.d_struct.txb->frag_size - IEEE80211_3ADDR_LEN;
+ else
+ ipw_hdr->fragment_size = 0;
+
+ tbd->host_addr = packet->info.d_struct.data_phys;
+ tbd->buf_length = sizeof(struct ipw2100_data_header);
+ tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
+ tbd->status.info.field =
+ IPW_BD_STATUS_TX_FRAME_802_3 |
+ IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
+ txq->next++;
+ txq->next %= txq->entries;
+
+ IPW_DEBUG_TX(
+ "data header tbd TX%d P=%08x L=%d\n",
+ packet->index, tbd->host_addr,
+ tbd->buf_length);
+#ifdef CONFIG_IPW_DEBUG
+ if (packet->info.d_struct.txb->nr_frags > 1)
+ IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
+ packet->info.d_struct.txb->nr_frags);
+#endif
+
+ for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
+ tbd = &txq->drv[txq->next];
+ if (i == packet->info.d_struct.txb->nr_frags - 1)
+ tbd->status.info.field =
+ IPW_BD_STATUS_TX_FRAME_802_3 |
+ IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
+ else
+ tbd->status.info.field =
+ IPW_BD_STATUS_TX_FRAME_802_3 |
+ IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
+
+ tbd->buf_length = packet->info.d_struct.txb->
+ fragments[i]->len - IEEE80211_3ADDR_LEN;
+
+ tbd->host_addr = pci_map_single(
+ priv->pci_dev,
+ packet->info.d_struct.txb->fragments[i]->data +
+ IEEE80211_3ADDR_LEN,
+ tbd->buf_length,
+ PCI_DMA_TODEVICE);
+
+ IPW_DEBUG_TX(
+ "data frag tbd TX%d P=%08x L=%d\n",
+ txq->next, tbd->host_addr, tbd->buf_length);
+
+ pci_dma_sync_single_for_device(
+ priv->pci_dev, tbd->host_addr,
+ tbd->buf_length,
+ PCI_DMA_TODEVICE);
+
+ txq->next++;
+ txq->next %= txq->entries;
+ }
+
+ txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
+ SET_STAT(&priv->txq_stat, txq->available);
+
+ list_add_tail(element, &priv->fw_pend_list);
+ INC_STAT(&priv->fw_pend_stat);
+ }
+
+ if (txq->next != next) {
+ /* kick off the DMA by notifying firmware the
+ * write index has moved; make sure TBD stores are sync'd */
+ write_register(priv->net_dev,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
+ txq->next);
+ }
+ return;
+}
+
+static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
+{
+ struct net_device *dev = priv->net_dev;
+ unsigned long flags;
+ u32 inta, tmp;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+ ipw2100_disable_interrupts(priv);
+
+ read_register(dev, IPW_REG_INTA, &inta);
+
+ IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
+ (unsigned long)inta & IPW_INTERRUPT_MASK);
+
+ priv->in_isr++;
+ priv->interrupts++;
+
+ /* We do not loop and keep polling for more interrupts as this
+ * is frowned upon and doesn't play nicely with other potentially
+ * chained IRQs */
+ IPW_DEBUG_ISR("INTA: 0x%08lX\n",
+ (unsigned long)inta & IPW_INTERRUPT_MASK);
+
+ if (inta & IPW2100_INTA_FATAL_ERROR) {
+ IPW_DEBUG_WARNING(DRV_NAME
+ ": Fatal interrupt. Scheduling firmware restart.\n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_FATAL_ERROR);
+
+ read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
+ IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
+ priv->net_dev->name, priv->fatal_error);
+
+ read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
+ IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
+ priv->net_dev->name, tmp);
+
+ /* Wake up any sleeping jobs */
+ schedule_reset(priv);
+ }
+
+ if (inta & IPW2100_INTA_PARITY_ERROR) {
+ IPW_DEBUG_ERROR("***** PARITY ERROR INTERRUPT !!!! \n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_PARITY_ERROR);
+ }
+
+ if (inta & IPW2100_INTA_RX_TRANSFER) {
+ IPW_DEBUG_ISR("RX interrupt\n");
+
+ priv->rx_interrupts++;
+
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_RX_TRANSFER);
+
+ __ipw2100_rx_process(priv);
+ __ipw2100_tx_complete(priv);
+ }
+
+ if (inta & IPW2100_INTA_TX_TRANSFER) {
+ IPW_DEBUG_ISR("TX interrupt\n");
+
+ priv->tx_interrupts++;
+
+ write_register(dev, IPW_REG_INTA,
+ IPW2100_INTA_TX_TRANSFER);
+
+ __ipw2100_tx_complete(priv);
+ X__ipw2100_tx_send_commands(priv);
+ X__ipw2100_tx_send_data(priv);
+ }
+
+ if (inta & IPW2100_INTA_TX_COMPLETE) {
+ IPW_DEBUG_ISR("TX complete\n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_TX_COMPLETE);
+
+ __ipw2100_tx_complete(priv);
+ }
+
+ if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
+ /* ipw2100_handle_event(dev); */
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_EVENT_INTERRUPT);
+ }
+
+ if (inta & IPW2100_INTA_FW_INIT_DONE) {
+ IPW_DEBUG_ISR("FW init done interrupt\n");
+ priv->inta_other++;
+
+ read_register(dev, IPW_REG_INTA, &tmp);
+ if (tmp & (IPW2100_INTA_FATAL_ERROR |
+ IPW2100_INTA_PARITY_ERROR)) {
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_FATAL_ERROR |
+ IPW2100_INTA_PARITY_ERROR);
+ }
+
+ write_register(dev, IPW_REG_INTA,
+ IPW2100_INTA_FW_INIT_DONE);
+ }
+
+ if (inta & IPW2100_INTA_STATUS_CHANGE) {
+ IPW_DEBUG_ISR("Status change interrupt\n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_STATUS_CHANGE);
+ }
+
+ if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
+ IPW_DEBUG_ISR("slave host mode interrupt\n");
+ priv->inta_other++;
+ write_register(
+ dev, IPW_REG_INTA,
+ IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
+ }
+
+ priv->in_isr--;
+ ipw2100_enable_interrupts(priv);
+
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ IPW_DEBUG_ISR("exit\n");
+}
+
+
+static irqreturn_t ipw2100_interrupt(int irq, void *data,
+ struct pt_regs *regs)
+{
+ struct ipw2100_priv *priv = data;
+ u32 inta, inta_mask;
+
+ if (!data)
+ return IRQ_NONE;
+
+ spin_lock(&priv->low_lock);
+
+ /* We check to see if we should be ignoring interrupts before
+ * we touch the hardware. During ucode load if we try and handle
+ * an interrupt we can cause keyboard problems as well as cause
+ * the ucode to fail to initialize */
+ if (!(priv->status & STATUS_INT_ENABLED)) {
+ /* Shared IRQ */
+ goto none;
+ }
+
+ read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
+ read_register(priv->net_dev, IPW_REG_INTA, &inta);
+
+ if (inta == 0xFFFFFFFF) {
+ /* Hardware disappeared */
+ IPW_DEBUG_WARNING("IRQ INTA == 0xFFFFFFFF\n");
+ goto none;
+ }
+
+ inta &= IPW_INTERRUPT_MASK;
+
+ if (!(inta & inta_mask)) {
+ /* Shared interrupt */
+ goto none;
+ }
+
+ /* We disable the hardware interrupt here just to prevent unneeded
+ * calls to be made. We disable this again within the actual
+ * work tasklet, so if another part of the code re-enables the
+ * interrupt, that is fine */
+ ipw2100_disable_interrupts(priv);
+
+ tasklet_schedule(&priv->irq_tasklet);
+ spin_unlock(&priv->low_lock);
+
+ return IRQ_HANDLED;
+ none:
+ spin_unlock(&priv->low_lock);
+ return IRQ_NONE;
+}
+
+static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ IPW_DEBUG_INFO("Can not transmit when not connected.\n");
+ priv->ieee->stats.tx_carrier_errors++;
+ netif_stop_queue(dev);
+ goto fail_unlock;
+ }
+
+ if (list_empty(&priv->tx_free_list))
+ goto fail_unlock;
+
+ element = priv->tx_free_list.next;
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+
+ packet->info.d_struct.txb = txb;
+
+ IPW_DEBUG_TX("Sending fragment (%d bytes):\n",
+ txb->fragments[0]->len);
+ printk_buf(IPW_DL_TX, txb->fragments[0]->data,
+ txb->fragments[0]->len);
+
+ packet->jiffy_start = jiffies;
+
+ list_del(element);
+ DEC_STAT(&priv->tx_free_stat);
+
+ list_add_tail(element, &priv->tx_pend_list);
+ INC_STAT(&priv->tx_pend_stat);
+
+ X__ipw2100_tx_send_data(priv);
+
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+ return 0;
+
+ fail_unlock:
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+ return 1;
+}
+
+
+static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
+{
+ int i, j, err = -EINVAL;
+ void *v;
+ dma_addr_t p;
+
+ priv->msg_buffers = (struct ipw2100_tx_packet *)kmalloc(
+ IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet),
+ GFP_KERNEL);
+ if (!priv->msg_buffers) {
+ IPW_DEBUG_ERROR("%s: PCI alloc failed for msg "
+ "buffers.\n", priv->net_dev->name);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
+ v = pci_alloc_consistent(
+ priv->pci_dev,
+ sizeof(struct ipw2100_cmd_header),
+ &p);
+ if (!v) {
+ IPW_DEBUG_ERROR(
+ "%s: PCI alloc failed for msg "
+ "buffers.\n",
+ priv->net_dev->name);
+ err = -ENOMEM;
+ break;
+ }
+
+ memset(v, 0, sizeof(struct ipw2100_cmd_header));
+
+ priv->msg_buffers[i].type = COMMAND;
+ priv->msg_buffers[i].info.c_struct.cmd =
+ (struct ipw2100_cmd_header*)v;
+ priv->msg_buffers[i].info.c_struct.cmd_phys = p;
+ }
+
+ if (i == IPW_COMMAND_POOL_SIZE)
+ return 0;
+
+ for (j = 0; j < i; j++) {
+ pci_free_consistent(
+ priv->pci_dev,
+ sizeof(struct ipw2100_cmd_header),
+ priv->msg_buffers[j].info.c_struct.cmd,
+ priv->msg_buffers[j].info.c_struct.cmd_phys);
+ }
+
+ kfree(priv->msg_buffers);
+ priv->msg_buffers = NULL;
+
+ return err;
+}
+
+static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
+{
+ int i;
+
+ INIT_LIST_HEAD(&priv->msg_free_list);
+ INIT_LIST_HEAD(&priv->msg_pend_list);
+
+ for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
+ list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
+ SET_STAT(&priv->msg_free_stat, i);
+
+ return 0;
+}
+
+static void ipw2100_msg_free(struct ipw2100_priv *priv)
+{
+ int i;
+
+ if (!priv->msg_buffers)
+ return;
+
+ for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
+ pci_free_consistent(priv->pci_dev,
+ sizeof(struct ipw2100_cmd_header),
+ priv->msg_buffers[i].info.c_struct.cmd,
+ priv->msg_buffers[i].info.c_struct.cmd_phys);
+ }
+
+ kfree(priv->msg_buffers);
+ priv->msg_buffers = NULL;
+}
+
+static ssize_t show_pci(struct device *d, char *buf)
+{
+ struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
+ char *out = buf;
+ int i, j;
+ u32 val;
+
+ for (i = 0; i < 16; i++) {
+ out += sprintf(out, "[%08X] ", i * 16);
+ for (j = 0; j < 16; j += 4) {
+ pci_read_config_dword(pci_dev, i * 16 + j, &val);
+ out += sprintf(out, "%08X ", val);
+ }
+ out += sprintf(out, "\n");
+ }
+
+ return out - buf;
+}
+static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
+
+static ssize_t show_cfg(struct device *d, char *buf)
+{
+ struct ipw2100_priv *p = (struct ipw2100_priv *)d->driver_data;
+ return sprintf(buf, "0x%08x\n", (int)p->config);
+}
+static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
+
+static ssize_t show_status(struct device *d, char *buf)
+{
+ struct ipw2100_priv *p = (struct ipw2100_priv *)d->driver_data;
+ return sprintf(buf, "0x%08x\n", (int)p->status);
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
+static ssize_t show_capability(struct device *d, char *buf)
+{
+ struct ipw2100_priv *p = (struct ipw2100_priv *)d->driver_data;
+ return sprintf(buf, "0x%08x\n", (int)p->capability);
+}
+static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
+
+
+#define IPW2100_REG(x) { IPW_ ##x, #x }
+const struct {
+ u32 addr;
+ const char *name;
+} hw_data[] = {
+ IPW2100_REG(REG_GP_CNTRL),
+ IPW2100_REG(REG_GPIO),
+ IPW2100_REG(REG_INTA),
+ IPW2100_REG(REG_INTA_MASK),
+ IPW2100_REG(REG_RESET_REG),
+};
+#define IPW2100_NIC(x, s) { x, #x, s }
+const struct {
+ u32 addr;
+ const char *name;
+ size_t size;
+} nic_data[] = {
+ IPW2100_NIC(IPW2100_CONTROL_REG, 2),
+ IPW2100_NIC(0x210014, 1),
+ IPW2100_NIC(0x210000, 1),
+};
+#define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
+const struct {
+ u8 index;
+ const char *name;
+ const char *desc;
+} ord_data[] = {
+ IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
+ IPW2100_ORD(STAT_TX_HOST_COMPLETE, "successful Host Tx's (MSDU)"),
+ IPW2100_ORD(STAT_TX_DIR_DATA, "successful Directed Tx's (MSDU)"),
+ IPW2100_ORD(STAT_TX_DIR_DATA1, "successful Directed Tx's (MSDU) @ 1MB"),
+ IPW2100_ORD(STAT_TX_DIR_DATA2, "successful Directed Tx's (MSDU) @ 2MB"),
+ IPW2100_ORD(STAT_TX_DIR_DATA5_5, "successful Directed Tx's (MSDU) @ 5_5MB"),
+ IPW2100_ORD(STAT_TX_DIR_DATA11, "successful Directed Tx's (MSDU) @ 11MB"),
+ IPW2100_ORD(STAT_TX_NODIR_DATA1, "successful Non_Directed Tx's (MSDU) @ 1MB"),
+ IPW2100_ORD(STAT_TX_NODIR_DATA2, "successful Non_Directed Tx's (MSDU) @ 2MB"),
+ IPW2100_ORD(STAT_TX_NODIR_DATA5_5, "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
+ IPW2100_ORD(STAT_TX_NODIR_DATA11, "successful Non_Directed Tx's (MSDU) @ 11MB"),
+ IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
+ IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
+ IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
+ IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
+ IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
+ IPW2100_ORD(STAT_TX_ASSN_RESP, "successful Association response Tx's"),
+ IPW2100_ORD(STAT_TX_REASSN, "successful Reassociation Tx's"),
+ IPW2100_ORD(STAT_TX_REASSN_RESP, "successful Reassociation response Tx's"),
+ IPW2100_ORD(STAT_TX_PROBE, "probes successfully transmitted"),
+ IPW2100_ORD(STAT_TX_PROBE_RESP, "probe responses successfully transmitted"),
+ IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
+ IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
+ IPW2100_ORD(STAT_TX_DISASSN, "successful Disassociation TX"),
+ IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
+ IPW2100_ORD(STAT_TX_DEAUTH, "successful Deauthentication TX"),
+ IPW2100_ORD(STAT_TX_TOTAL_BYTES, "Total successful Tx data bytes"),
+ IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
+ IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
+ IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
+ IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
+ IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
+ IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
+ IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,"times max tries in a hop failed"),
+ IPW2100_ORD(STAT_TX_DISASSN_FAIL, "times disassociation failed"),
+ IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
+ IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
+ IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
+ IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
+ IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
+ IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
+ IPW2100_ORD(STAT_RX_DIR_DATA5_5, "directed packets at 5.5MB"),
+ IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA,"nondirected packets"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA1, "nondirected packets at 1MB"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA2, "nondirected packets at 2MB"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA5_5, "nondirected packets at 5.5MB"),
+ IPW2100_ORD(STAT_RX_NODIR_DATA11, "nondirected packets at 11MB"),
+ IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
+ IPW2100_ORD(STAT_RX_RTS, "Rx RTS"),
+ IPW2100_ORD(STAT_RX_CTS, "Rx CTS"),
+ IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
+ IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
+ IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
+ IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
+ IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
+ IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
+ IPW2100_ORD(STAT_RX_REASSN_RESP, "Reassociation response Rx's"),
+ IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
+ IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
+ IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
+ IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
+ IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
+ IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
+ IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
+ IPW2100_ORD(STAT_RX_TOTAL_BYTES,"Total rx data bytes received"),
+ IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
+ IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
+ IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
+ IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
+ IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE1, "duplicate rx packets at 1MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE2, "duplicate rx packets at 2MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE5_5, "duplicate rx packets at 5.5MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE11, "duplicate rx packets at 11MB"),
+ IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
+ IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
+ IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
+ IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
+ IPW2100_ORD(STAT_RX_INVALID_PROTOCOL, "rx frames with invalid protocol"),
+ IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
+ IPW2100_ORD(STAT_RX_NO_BUFFER, "rx frames rejected due to no buffer"),
+ IPW2100_ORD(STAT_RX_MISSING_FRAG, "rx frames dropped due to missing fragment"),
+ IPW2100_ORD(STAT_RX_ORPHAN_FRAG, "rx frames dropped due to non-sequential fragment"),
+ IPW2100_ORD(STAT_RX_ORPHAN_FRAME, "rx frames dropped due to unmatched 1st frame"),
+ IPW2100_ORD(STAT_RX_FRAG_AGEOUT, "rx frames dropped due to uncompleted frame"),
+ IPW2100_ORD(STAT_RX_ICV_ERRORS, "ICV errors during decryption"),
+ IPW2100_ORD(STAT_PSP_SUSPENSION,"times adapter suspended"),
+ IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
+ IPW2100_ORD(STAT_PSP_POLL_TIMEOUT, "poll response timeouts"),
+ IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT, "timeouts waiting for last {broad,multi}cast pkt"),
+ IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
+ IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
+ IPW2100_ORD(STAT_PSP_STATION_ID,"PSP Station ID"),
+ IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
+ IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,"current calculation of % missed beacons"),
+ IPW2100_ORD(STAT_PERCENT_RETRIES,"current calculation of % missed tx retries"),
+ IPW2100_ORD(ASSOCIATED_AP_PTR, "0 if not associated, else pointer to AP table entry"),
+ IPW2100_ORD(AVAILABLE_AP_CNT, "AP's decsribed in the AP table"),
+ IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
+ IPW2100_ORD(STAT_AP_ASSNS, "associations"),
+ IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
+ IPW2100_ORD(STAT_ASSN_RESP_FAIL,"failures due to response fail"),
+ IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
+ IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
+ IPW2100_ORD(STAT_ROAM_INHIBIT, "times roaming was inhibited due to activity"),
+ IPW2100_ORD(RSSI_AT_ASSN, "RSSI of associated AP at time of association"),
+ IPW2100_ORD(STAT_ASSN_CAUSE1, "reassociation: no probe response or TX on hop"),
+ IPW2100_ORD(STAT_ASSN_CAUSE2, "reassociation: poor tx/rx quality"),
+ IPW2100_ORD(STAT_ASSN_CAUSE3, "reassociation: tx/rx quality (excessive AP load"),
+ IPW2100_ORD(STAT_ASSN_CAUSE4, "reassociation: AP RSSI level"),
+ IPW2100_ORD(STAT_ASSN_CAUSE5, "reassociations due to load leveling"),
+ IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
+ IPW2100_ORD(STAT_AUTH_RESP_FAIL,"times authentication response failed"),
+ IPW2100_ORD(STATION_TABLE_CNT, "entries in association table"),
+ IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
+ IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
+ IPW2100_ORD(COUNTRY_CODE, "IEEE country code as recv'd from beacon"),
+ IPW2100_ORD(COUNTRY_CHANNELS, "channels suported by country"),
+ IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
+ IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
+ IPW2100_ORD(ANTENNA_DIVERSITY, "TRUE if antenna diversity is disabled"),
+ IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
+ IPW2100_ORD(OUR_FREQ, "current radio freq lower digits - channel ID"),
+ IPW2100_ORD(RTC_TIME, "current RTC time"),
+ IPW2100_ORD(PORT_TYPE, "operating mode"),
+ IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
+ IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
+ IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
+ IPW2100_ORD(BASIC_RATES, "basic tx rates"),
+ IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
+ IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
+ IPW2100_ORD(CAPABILITIES, "Management frame capability field"),
+ IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
+ IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
+ IPW2100_ORD(RTS_THRESHOLD, "Min packet length for RTS handshaking"),
+ IPW2100_ORD(INT_MODE, "International mode"),
+ IPW2100_ORD(FRAGMENTATION_THRESHOLD, "protocol frag threshold"),
+ IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS, "EEPROM offset in SRAM"),
+ IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE, "EEPROM size in SRAM"),
+ IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
+ IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS, "EEPROM IBSS 11b channel set"),
+ IPW2100_ORD(MAC_VERSION, "MAC Version"),
+ IPW2100_ORD(MAC_REVISION, "MAC Revision"),
+ IPW2100_ORD(RADIO_VERSION, "Radio Version"),
+ IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
+ IPW2100_ORD(UCODE_VERSION, "Ucode Version"),
+};
+
+
+static ssize_t show_registers(struct device *d, char *buf)
+{
+ int i;
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ char * out = buf;
+ u32 val = 0;
+
+ out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
+
+ for (i = 0; i < (sizeof(hw_data) / sizeof(*hw_data)); i++) {
+ read_register(dev, hw_data[i].addr, &val);
+ out += sprintf(out, "%30s [%08X] : %08X\n",
+ hw_data[i].name, hw_data[i].addr, val);
+ }
+
+ return out - buf;
+}
+static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
+
+
+static ssize_t show_hardware(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ char * out = buf;
+ int i;
+
+ out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
+
+ for (i = 0; i < (sizeof(nic_data) / sizeof(*nic_data)); i++) {
+ u8 tmp8;
+ u16 tmp16;
+ u32 tmp32;
+
+ switch (nic_data[i].size) {
+ case 1:
+ read_nic_byte(dev, nic_data[i].addr, &tmp8);
+ out += sprintf(out, "%30s [%08X] : %02X\n",
+ nic_data[i].name, nic_data[i].addr,
+ tmp8);
+ break;
+ case 2:
+ read_nic_word(dev, nic_data[i].addr, &tmp16);
+ out += sprintf(out, "%30s [%08X] : %04X\n",
+ nic_data[i].name, nic_data[i].addr,
+ tmp16);
+ break;
+ case 4:
+ read_nic_dword(dev, nic_data[i].addr, &tmp32);
+ out += sprintf(out, "%30s [%08X] : %08X\n",
+ nic_data[i].name, nic_data[i].addr,
+ tmp32);
+ break;
+ }
+ }
+ return out - buf;
+}
+static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
+
+
+static ssize_t show_memory(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ static unsigned long loop = 0;
+ int len = 0;
+ u32 buffer[4];
+ int i;
+ char line[81];
+
+ if (loop >= 0x30000)
+ loop = 0;
+
+ /* sysfs provides us PAGE_SIZE buffer */
+ while (len < PAGE_SIZE - 128 && loop < 0x30000) {
+
+ if (priv->snapshot[0]) for (i = 0; i < 4; i++)
+ buffer[i] = *(u32 *)SNAPSHOT_ADDR(loop + i * 4);
+ else for (i = 0; i < 4; i++)
+ read_nic_dword(dev, loop + i * 4, &buffer[i]);
+
+ if (priv->dump_raw)
+ len += sprintf(buf + len,
+ "%c%c%c%c"
+ "%c%c%c%c"
+ "%c%c%c%c"
+ "%c%c%c%c",
+ ((u8*)buffer)[0x0],
+ ((u8*)buffer)[0x1],
+ ((u8*)buffer)[0x2],
+ ((u8*)buffer)[0x3],
+ ((u8*)buffer)[0x4],
+ ((u8*)buffer)[0x5],
+ ((u8*)buffer)[0x6],
+ ((u8*)buffer)[0x7],
+ ((u8*)buffer)[0x8],
+ ((u8*)buffer)[0x9],
+ ((u8*)buffer)[0xa],
+ ((u8*)buffer)[0xb],
+ ((u8*)buffer)[0xc],
+ ((u8*)buffer)[0xd],
+ ((u8*)buffer)[0xe],
+ ((u8*)buffer)[0xf]);
+ else
+ len += sprintf(buf + len, "%s\n",
+ snprint_line(line, sizeof(line),
+ (u8*)buffer, 16, loop));
+ loop += 16;
+ }
+
+ return len;
+}
+
+static ssize_t store_memory(struct device *d, const char *buf, size_t count)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ const char *p = buf;
+
+ if (count < 1)
+ return count;
+
+ if (p[0] == '1' ||
+ (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
+ IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
+ dev->name);
+ priv->dump_raw = 1;
+
+ } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
+ tolower(p[1]) == 'f')) {
+ IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
+ dev->name);
+ priv->dump_raw = 0;
+
+ } else if (tolower(p[0]) == 'r') {
+ IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n",
+ dev->name);
+ ipw2100_snapshot_free(priv);
+
+ } else
+ IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
+ "reset = clear memory snapshot\n",
+ dev->name);
+
+ return count;
+}
+static DEVICE_ATTR(memory, S_IWUSR|S_IRUGO, show_memory, store_memory);
+
+
+static ssize_t show_ordinals(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ u32 val = 0;
+ int len = 0;
+ u32 val_len;
+ static int loop = 0;
+
+ if (loop >= sizeof(ord_data) / sizeof(*ord_data))
+ loop = 0;
+
+ /* sysfs provides us PAGE_SIZE buffer */
+ while (len < PAGE_SIZE - 128 &&
+ loop < (sizeof(ord_data) / sizeof(*ord_data))) {
+
+ val_len = sizeof(u32);
+
+ if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
+ &val_len))
+ len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
+ ord_data[loop].index,
+ ord_data[loop].desc);
+ else
+ len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
+ ord_data[loop].index, val,
+ ord_data[loop].desc);
+ loop++;
+ }
+
+ return len;
+}
+static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
+
+
+static ssize_t show_stats(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ char * out = buf;
+
+ out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
+ priv->interrupts, priv->tx_interrupts,
+ priv->rx_interrupts, priv->inta_other);
+ out += sprintf(out, "firmware resets: %d\n", priv->resets);
+ out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
+#ifdef CONFIG_IPW_DEBUG
+ out += sprintf(out, "packet mismatch image: %s\n",
+ priv->snapshot[0] ? "YES" : "NO");
+#endif
+
+ return out - buf;
+}
+static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
+
+
+int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
+{
+ int err;
+
+ if (mode == priv->ieee->iw_mode)
+ return 0;
+
+ err = ipw2100_disable_adapter(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+
+ switch (mode) {
+ case IW_MODE_INFRA:
+ priv->net_dev->type = ARPHRD_ETHER;
+ break;
+ case IW_MODE_ADHOC:
+ priv->net_dev->type = ARPHRD_ETHER;
+ break;
+#ifdef CONFIG_IPW2100_MONITOR
+ case IW_MODE_MONITOR:
+ priv->last_mode = priv->ieee->iw_mode;
+ priv->net_dev->type = ARPHRD_IEEE80211;
+ break;
+#endif /* CONFIG_IPW2100_MONITOR */
+ }
+
+ priv->ieee->iw_mode = mode;
+
+#ifdef CONFIG_PM
+ /* Indicate ipw2100_download_firmware download firmware
+ * from disk instead of memory. */
+ ipw2100_firmware.version = 0;
+#endif
+
+ printk(KERN_INFO "%s: Reseting on mode change.\n",
+ priv->net_dev->name);
+ priv->reset_backoff = 0;
+ schedule_reset(priv);
+
+ return 0;
+}
+
+static ssize_t show_internals(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ int len = 0;
+
+#define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" # y "\n", priv-> x)
+
+ if (priv->status & STATUS_ASSOCIATED)
+ len += sprintf(buf + len, "connected: %lu\n",
+ get_seconds() - priv->connect_start);
+ else
+ len += sprintf(buf + len, "not connected\n");
+
+ DUMP_VAR(ieee->crypt[priv->ieee->tx_keyidx], p);
+ DUMP_VAR(status, 08lx);
+ DUMP_VAR(config, 08lx);
+ DUMP_VAR(capability, 08lx);
+
+ len += sprintf(buf + len, "last_rtc: %lu\n", (unsigned long)priv->last_rtc);
+
+ DUMP_VAR(fatal_error, d);
+ DUMP_VAR(stop_hang_check, d);
+ DUMP_VAR(stop_rf_kill, d);
+ DUMP_VAR(messages_sent, d);
+
+ DUMP_VAR(tx_pend_stat.value, d);
+ DUMP_VAR(tx_pend_stat.hi, d);
+
+ DUMP_VAR(tx_free_stat.value, d);
+ DUMP_VAR(tx_free_stat.lo, d);
+
+ DUMP_VAR(msg_free_stat.value, d);
+ DUMP_VAR(msg_free_stat.lo, d);
+
+ DUMP_VAR(msg_pend_stat.value, d);
+ DUMP_VAR(msg_pend_stat.hi, d);
+
+ DUMP_VAR(fw_pend_stat.value, d);
+ DUMP_VAR(fw_pend_stat.hi, d);
+
+ DUMP_VAR(txq_stat.value, d);
+ DUMP_VAR(txq_stat.lo, d);
+
+ DUMP_VAR(ieee->scans, d);
+ DUMP_VAR(reset_backoff, d);
+
+ return len;
+}
+static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
+
+
+static ssize_t show_bssinfo(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ char essid[IW_ESSID_MAX_SIZE + 1];
+ u8 bssid[ETH_ALEN];
+ u32 chan = 0;
+ char * out = buf;
+ int length;
+ int ret;
+
+ memset(essid, 0, sizeof(essid));
+ memset(bssid, 0, sizeof(bssid));
+
+ length = IW_ESSID_MAX_SIZE;
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
+ if (ret)
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+
+ length = sizeof(bssid);
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
+ bssid, &length);
+ if (ret)
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+
+ length = sizeof(u32);
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
+ if (ret)
+ IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+ __LINE__);
+
+ out += sprintf(out, "ESSID: %s\n", essid);
+ out += sprintf(out, "BSSID: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ bssid[0], bssid[1], bssid[2],
+ bssid[3], bssid[4], bssid[5]);
+ out += sprintf(out, "Channel: %d\n", chan);
+
+ return out - buf;
+}
+static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
+
+
+
+
+#ifdef CONFIG_IPW_DEBUG
+static ssize_t show_debug_level(struct device_driver *d, char *buf)
+{
+ return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
+}
+
+static ssize_t store_debug_level(struct device_driver *d, const char *buf,
+ size_t count)
+{
+ char *p = (char *)buf;
+ u32 val;
+
+ if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
+ p++;
+ if (p[0] == 'x' || p[0] == 'X')
+ p++;
+ val = simple_strtoul(p, &p, 16);
+ } else
+ val = simple_strtoul(p, &p, 10);
+ if (p == buf)
+ IPW_DEBUG_INFO(DRV_NAME
+ ": %s is not in hex or decimal form.\n", buf);
+ else
+ ipw2100_debug_level = val;
+
+ return strnlen(buf, count);
+}
+static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
+ store_debug_level);
+#endif /* CONFIG_IPW_DEBUG */
+
+
+static ssize_t show_fatal_error(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ char *out = buf;
+ int i;
+
+ if (priv->fatal_error)
+ out += sprintf(out, "0x%08X\n",
+ priv->fatal_error);
+ else
+ out += sprintf(out, "0\n");
+
+ for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
+ if (!priv->fatal_errors[(priv->fatal_index - i) %
+ IPW2100_ERROR_QUEUE])
+ continue;
+
+ out += sprintf(out, "%d. 0x%08X\n", i,
+ priv->fatal_errors[(priv->fatal_index - i) %
+ IPW2100_ERROR_QUEUE]);
+ }
+
+ return out - buf;
+}
+
+static ssize_t store_fatal_error(struct device *d, const char *buf,
+ size_t count)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ schedule_reset(priv);
+ return count;
+}
+static DEVICE_ATTR(fatal_error, S_IWUSR|S_IRUGO, show_fatal_error, store_fatal_error);
+
+
+static ssize_t show_scan_age(struct device *d, char *buf)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ return sprintf(buf, "%d\n", priv->ieee->scan_age);
+}
+
+static ssize_t store_scan_age(struct device *d, const char *buf, size_t count)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ struct net_device *dev = priv->net_dev;
+ char buffer[] = "00000000";
+ unsigned long len =
+ (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
+ unsigned long val;
+ char *p = buffer;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ strncpy(buffer, buf, len);
+ buffer[len] = 0;
+
+ if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
+ p++;
+ if (p[0] == 'x' || p[0] == 'X')
+ p++;
+ val = simple_strtoul(p, &p, 16);
+ } else
+ val = simple_strtoul(p, &p, 10);
+ if (p == buffer) {
+ IPW_DEBUG_INFO("%s: user supplied invalid value.\n",
+ dev->name);
+ } else {
+ priv->ieee->scan_age = val;
+ IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+ return len;
+}
+static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
+
+
+static ssize_t show_rf_kill(struct device *d, char *buf)
+{
+ /* 0 - RF kill not enabled
+ 1 - SW based RF kill active (sysfs)
+ 2 - HW based RF kill active
+ 3 - Both HW and SW baed RF kill active */
+ struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
+ int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
+ (rf_kill_active(priv) ? 0x2 : 0x0);
+ return sprintf(buf, "%i\n", val);
+}
+
+static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
+{
+ if ((disable_radio ? 1 : 0) ==
+ (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
+ return 0 ;
+
+ IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
+ disable_radio ? "OFF" : "ON");
+
+ down(&priv->action_sem);
+
+ if (disable_radio) {
+ priv->status |= STATUS_RF_KILL_SW;
+ ipw2100_down(priv);
+ } else {
+ priv->status &= ~STATUS_RF_KILL_SW;
+ if (rf_kill_active(priv)) {
+ IPW_DEBUG_RF_KILL("Can not turn radio back on - "
+ "disabled by HW switch\n");
+ /* Make sure the RF_KILL check timer is running */
+ priv->stop_rf_kill = 0;
+ cancel_delayed_work(&priv->rf_kill);
+ queue_delayed_work(priv->workqueue, &priv->rf_kill,
+ HZ);
+ } else
+ schedule_reset(priv);
+ }
+
+ up(&priv->action_sem);
+ return 1;
+}
+
+static ssize_t store_rf_kill(struct device *d, const char *buf, size_t count)
+{
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
+ ipw_radio_kill_sw(priv, buf[0] == '1');
+ return count;
+}
+static DEVICE_ATTR(rf_kill, S_IWUSR|S_IRUGO, show_rf_kill, store_rf_kill);
+
+
+static struct attribute *ipw2100_sysfs_entries[] = {
+ &dev_attr_hardware.attr,
+ &dev_attr_registers.attr,
+ &dev_attr_ordinals.attr,
+ &dev_attr_pci.attr,
+ &dev_attr_stats.attr,
+ &dev_attr_internals.attr,
+ &dev_attr_bssinfo.attr,
+ &dev_attr_memory.attr,
+ &dev_attr_scan_age.attr,
+ &dev_attr_fatal_error.attr,
+ &dev_attr_rf_kill.attr,
+ &dev_attr_cfg.attr,
+ &dev_attr_status.attr,
+ &dev_attr_capability.attr,
+ NULL,
+};
+
+static struct attribute_group ipw2100_attribute_group = {
+ .attrs = ipw2100_sysfs_entries,
+};
+
+
+static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
+{
+ struct ipw2100_status_queue *q = &priv->status_queue;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ q->size = entries * sizeof(struct ipw2100_status);
+ q->drv = (struct ipw2100_status *)pci_alloc_consistent(
+ priv->pci_dev, q->size, &q->nic);
+ if (!q->drv) {
+ IPW_DEBUG_WARNING(
+ "Can not allocate status queue.\n");
+ return -ENOMEM;
+ }
+
+ memset(q->drv, 0, q->size);
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+static void status_queue_free(struct ipw2100_priv *priv)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ if (priv->status_queue.drv) {
+ pci_free_consistent(
+ priv->pci_dev, priv->status_queue.size,
+ priv->status_queue.drv, priv->status_queue.nic);
+ priv->status_queue.drv = NULL;
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static int bd_queue_allocate(struct ipw2100_priv *priv,
+ struct ipw2100_bd_queue *q, int entries)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ memset(q, 0, sizeof(struct ipw2100_bd_queue));
+
+ q->entries = entries;
+ q->size = entries * sizeof(struct ipw2100_bd);
+ q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
+ if (!q->drv) {
+ IPW_DEBUG_INFO("can't allocate shared memory for buffer descriptors\n");
+ return -ENOMEM;
+ }
+ memset(q->drv, 0, q->size);
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+static void bd_queue_free(struct ipw2100_priv *priv,
+ struct ipw2100_bd_queue *q)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ if (!q)
+ return;
+
+ if (q->drv) {
+ pci_free_consistent(priv->pci_dev,
+ q->size, q->drv, q->nic);
+ q->drv = NULL;
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static void bd_queue_initialize(
+ struct ipw2100_priv *priv, struct ipw2100_bd_queue * q,
+ u32 base, u32 size, u32 r, u32 w)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv, q->nic);
+
+ write_register(priv->net_dev, base, q->nic);
+ write_register(priv->net_dev, size, q->entries);
+ write_register(priv->net_dev, r, q->oldest);
+ write_register(priv->net_dev, w, q->next);
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static void ipw2100_kill_workqueue(struct ipw2100_priv *priv)
+{
+ if (priv->workqueue) {
+ priv->stop_rf_kill = 1;
+ priv->stop_hang_check = 1;
+ cancel_delayed_work(&priv->reset_work);
+ cancel_delayed_work(&priv->security_work);
+ cancel_delayed_work(&priv->wx_event_work);
+ cancel_delayed_work(&priv->hang_check);
+ cancel_delayed_work(&priv->rf_kill);
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
+ }
+}
+
+static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
+{
+ int i, j, err = -EINVAL;
+ void *v;
+ dma_addr_t p;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
+ priv->net_dev->name);
+ return err;
+ }
+
+ priv->tx_buffers = (struct ipw2100_tx_packet *)kmalloc(
+ TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet),
+ GFP_ATOMIC);
+ if (!priv->tx_buffers) {
+ IPW_DEBUG_ERROR("%s: alloc failed form tx buffers.\n",
+ priv->net_dev->name);
+ bd_queue_free(priv, &priv->tx_queue);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
+ v = pci_alloc_consistent(
+ priv->pci_dev, sizeof(struct ipw2100_data_header), &p);
+ if (!v) {
+ IPW_DEBUG_ERROR("%s: PCI alloc failed for tx "
+ "buffers.\n", priv->net_dev->name);
+ err = -ENOMEM;
+ break;
+ }
+
+ priv->tx_buffers[i].type = DATA;
+ priv->tx_buffers[i].info.d_struct.data = (struct ipw2100_data_header*)v;
+ priv->tx_buffers[i].info.d_struct.data_phys = p;
+ priv->tx_buffers[i].info.d_struct.txb = NULL;
+ }
+
+ if (i == TX_PENDED_QUEUE_LENGTH)
+ return 0;
+
+ for (j = 0; j < i; j++) {
+ pci_free_consistent(
+ priv->pci_dev,
+ sizeof(struct ipw2100_data_header),
+ priv->tx_buffers[j].info.d_struct.data,
+ priv->tx_buffers[j].info.d_struct.data_phys);
+ }
+
+ kfree(priv->tx_buffers);
+ priv->tx_buffers = NULL;
+
+ return err;
+}
+
+static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
+{
+ int i;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ /*
+ * reinitialize packet info lists
+ */
+ INIT_LIST_HEAD(&priv->fw_pend_list);
+ INIT_STAT(&priv->fw_pend_stat);
+
+ /*
+ * reinitialize lists
+ */
+ INIT_LIST_HEAD(&priv->tx_pend_list);
+ INIT_LIST_HEAD(&priv->tx_free_list);
+ INIT_STAT(&priv->tx_pend_stat);
+ INIT_STAT(&priv->tx_free_stat);
+
+ for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
+ /* We simply drop any SKBs that have been queued for
+ * transmit */
+ if (priv->tx_buffers[i].info.d_struct.txb) {
+ ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb);
+ priv->tx_buffers[i].info.d_struct.txb = NULL;
+ }
+
+ list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
+ }
+
+ SET_STAT(&priv->tx_free_stat, i);
+
+ priv->tx_queue.oldest = 0;
+ priv->tx_queue.available = priv->tx_queue.entries;
+ priv->tx_queue.next = 0;
+ INIT_STAT(&priv->txq_stat);
+ SET_STAT(&priv->txq_stat, priv->tx_queue.available);
+
+ bd_queue_initialize(priv, &priv->tx_queue,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
+ IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
+
+ IPW_DEBUG_INFO("exit\n");
+
+}
+
+static void ipw2100_tx_free(struct ipw2100_priv *priv)
+{
+ int i;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ bd_queue_free(priv, &priv->tx_queue);
+
+ if (!priv->tx_buffers)
+ return;
+
+ for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
+ if (priv->tx_buffers[i].info.d_struct.txb) {
+ ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb);
+ priv->tx_buffers[i].info.d_struct.txb = NULL;
+ }
+ if (priv->tx_buffers[i].info.d_struct.data)
+ pci_free_consistent(
+ priv->pci_dev,
+ sizeof(struct ipw2100_data_header),
+ priv->tx_buffers[i].info.d_struct.data,
+ priv->tx_buffers[i].info.d_struct.data_phys);
+ }
+
+ kfree(priv->tx_buffers);
+ priv->tx_buffers = NULL;
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+
+
+static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
+{
+ int i, j, err = -EINVAL;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
+ if (err) {
+ IPW_DEBUG_INFO("failed bd_queue_allocate\n");
+ return err;
+ }
+
+ err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
+ if (err) {
+ IPW_DEBUG_INFO("failed status_queue_allocate\n");
+ bd_queue_free(priv, &priv->rx_queue);
+ return err;
+ }
+
+ /*
+ * allocate packets
+ */
+ priv->rx_buffers = (struct ipw2100_rx_packet *)
+ kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet),
+ GFP_KERNEL);
+ if (!priv->rx_buffers) {
+ IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
+
+ bd_queue_free(priv, &priv->rx_queue);
+
+ status_queue_free(priv);
+
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < RX_QUEUE_LENGTH; i++) {
+ struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
+
+ err = ipw2100_alloc_skb(priv, packet);
+ if (unlikely(err)) {
+ err = -ENOMEM;
+ break;
+ }
+
+ /* The BD holds the cache aligned address */
+ priv->rx_queue.drv[i].host_addr = packet->dma_addr;
+ priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
+ priv->status_queue.drv[i].status_fields = 0;
+ }
+
+ if (i == RX_QUEUE_LENGTH)
+ return 0;
+
+ for (j = 0; j < i; j++) {
+ pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
+ sizeof(struct ipw2100_rx_packet),
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(priv->rx_buffers[j].skb);
+ }
+
+ kfree(priv->rx_buffers);
+ priv->rx_buffers = NULL;
+
+ bd_queue_free(priv, &priv->rx_queue);
+
+ status_queue_free(priv);
+
+ return err;
+}
+
+static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
+{
+ IPW_DEBUG_INFO("enter\n");
+
+ priv->rx_queue.oldest = 0;
+ priv->rx_queue.available = priv->rx_queue.entries - 1;
+ priv->rx_queue.next = priv->rx_queue.entries - 1;
+
+ INIT_STAT(&priv->rxq_stat);
+ SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
+
+ bd_queue_initialize(priv, &priv->rx_queue,
+ IPW_MEM_HOST_SHARED_RX_BD_BASE,
+ IPW_MEM_HOST_SHARED_RX_BD_SIZE,
+ IPW_MEM_HOST_SHARED_RX_READ_INDEX,
+ IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
+
+ /* set up the status queue */
+ write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
+ priv->status_queue.nic);
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static void ipw2100_rx_free(struct ipw2100_priv *priv)
+{
+ int i;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ bd_queue_free(priv, &priv->rx_queue);
+ status_queue_free(priv);
+
+ if (!priv->rx_buffers)
+ return;
+
+ for (i = 0; i < RX_QUEUE_LENGTH; i++) {
+ if (priv->rx_buffers[i].rxp) {
+ pci_unmap_single(priv->pci_dev,
+ priv->rx_buffers[i].dma_addr,
+ sizeof(struct ipw2100_rx),
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(priv->rx_buffers[i].skb);
+ }
+ }
+
+ kfree(priv->rx_buffers);
+ priv->rx_buffers = NULL;
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
+{
+ u32 length = ETH_ALEN;
+ u8 mac[ETH_ALEN];
+
+ int err;
+
+ err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC,
+ mac, &length);
+ if (err) {
+ IPW_DEBUG_INFO("MAC address read failed\n");
+ return -EIO;
+ }
+ IPW_DEBUG_INFO("card MAC is %02X:%02X:%02X:%02X:%02X:%02X\n",
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+
+ memcpy(priv->net_dev->dev_addr, mac, ETH_ALEN);
+
+ return 0;
+}
+
+/********************************************************************
+ *
+ * Firmware Commands
+ *
+ ********************************************************************/
+
+int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = ADAPTER_ADDRESS,
+ .host_command_sequence = 0,
+ .host_command_length = ETH_ALEN
+ };
+ int err;
+
+ IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
+
+ IPW_DEBUG_INFO("enter\n");
+
+ if (priv->config & CFG_CUSTOM_MAC) {
+ memcpy(cmd.host_command_parameters, priv->mac_addr,
+ ETH_ALEN);
+ memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
+ } else
+ memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
+ ETH_ALEN);
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ IPW_DEBUG_INFO("exit\n");
+ return err;
+}
+
+int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = PORT_TYPE,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(u32)
+ };
+ int err;
+
+ switch (port_type) {
+ case IW_MODE_INFRA:
+ cmd.host_command_parameters[0] = IPW_BSS;
+ break;
+ case IW_MODE_ADHOC:
+ cmd.host_command_parameters[0] = IPW_IBSS;
+ break;
+ }
+
+ IPW_DEBUG_HC("PORT_TYPE: %s\n",
+ port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+ }
+
+ /* send cmd to firmware */
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+
+int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = CHANNEL,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(u32)
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = channel;
+
+ IPW_DEBUG_HC("CHANNEL: %d\n", channel);
+
+ /* If BSS then we don't support channel selection */
+ if (priv->ieee->iw_mode == IW_MODE_INFRA)
+ return 0;
+
+ if ((channel != 0) &&
+ ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
+ return -EINVAL;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err) {
+ IPW_DEBUG_INFO("Failed to set channel to %d",
+ channel);
+ return err;
+ }
+
+ if (channel)
+ priv->config |= CFG_STATIC_CHANNEL;
+ else
+ priv->config &= ~CFG_STATIC_CHANNEL;
+
+ priv->channel = channel;
+
+ if (!batch_mode) {
+ err = ipw2100_enable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = SYSTEM_CONFIG,
+ .host_command_sequence = 0,
+ .host_command_length = 12,
+ };
+ u32 ibss_mask, len = sizeof(u32);
+ int err;
+
+ /* Set system configuration */
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC)
+ cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
+
+ cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
+ IPW_CFG_BSS_MASK |
+ IPW_CFG_802_1x_ENABLE;
+
+ if (!(priv->config & CFG_LONG_PREAMBLE))
+ cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
+
+ err = ipw2100_get_ordinal(priv,
+ IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
+ &ibss_mask, &len);
+ if (err)
+ ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
+
+ cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
+ cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
+
+ /* 11b only */
+ /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A;*/
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+/* If IPv6 is configured in the kernel then we don't want to filter out all
+ * of the multicast packets as IPv6 needs some. */
+#if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
+ cmd.host_command = ADD_MULTICAST;
+ cmd.host_command_sequence = 0;
+ cmd.host_command_length = 0;
+
+ ipw2100_hw_send_command(priv, &cmd);
+#endif
+ if (!batch_mode) {
+ err = ipw2100_enable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = BASIC_TX_RATES,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ /* Set BASIC TX Rate first */
+ ipw2100_hw_send_command(priv, &cmd);
+
+ /* Set TX Rate */
+ cmd.host_command = TX_RATES;
+ ipw2100_hw_send_command(priv, &cmd);
+
+ /* Set MSDU TX Rate */
+ cmd.host_command = MSDU_TX_RATES;
+ ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode) {
+ err = ipw2100_enable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ priv->tx_rates = rate;
+
+ return 0;
+}
+
+int ipw2100_set_power_mode(struct ipw2100_priv *priv,
+ int power_level)
+{
+ struct host_command cmd = {
+ .host_command = POWER_MODE,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = power_level;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ if (power_level == IPW_POWER_MODE_CAM)
+ priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
+ else
+ priv->power_mode = IPW_POWER_ENABLED | power_level;
+
+#ifdef CONFIG_IPW2100_TX_POWER
+ if (priv->port_type == IBSS &&
+ priv->adhoc_power != DFTL_IBSS_TX_POWER) {
+ /* Set beacon interval */
+ cmd.host_command = TX_POWER_INDEX;
+ cmd.host_command_parameters[0] = (u32)priv->adhoc_power;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+ }
+#endif
+
+ return 0;
+}
+
+
+int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
+{
+ struct host_command cmd = {
+ .host_command = RTS_THRESHOLD,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ if (threshold & RTS_DISABLED)
+ cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
+ else
+ cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ priv->rts_threshold = threshold;
+
+ return 0;
+}
+
+#if 0
+int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
+ u32 threshold, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = FRAG_THRESHOLD,
+ .host_command_sequence = 0,
+ .host_command_length = 4,
+ .host_command_parameters[0] = 0,
+ };
+ int err;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ if (threshold == 0)
+ threshold = DEFAULT_FRAG_THRESHOLD;
+ else {
+ threshold = max(threshold, MIN_FRAG_THRESHOLD);
+ threshold = min(threshold, MAX_FRAG_THRESHOLD);
+ }
+
+ cmd.host_command_parameters[0] = threshold;
+
+ IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ if (!err)
+ priv->frag_threshold = threshold;
+
+ return err;
+}
+#endif
+
+int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
+{
+ struct host_command cmd = {
+ .host_command = SHORT_RETRY_LIMIT,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = retry;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ priv->short_retry_limit = retry;
+
+ return 0;
+}
+
+int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
+{
+ struct host_command cmd = {
+ .host_command = LONG_RETRY_LIMIT,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = retry;
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (err)
+ return err;
+
+ priv->long_retry_limit = retry;
+
+ return 0;
+}
+
+
+int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 *bssid,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = MANDATORY_BSSID,
+ .host_command_sequence = 0,
+ .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
+ };
+ int err;
+
+#ifdef CONFIG_IPW_DEBUG
+ if (bssid != NULL)
+ IPW_DEBUG_HC(
+ "MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ bssid[0], bssid[1], bssid[2], bssid[3], bssid[4],
+ bssid[5]);
+ else
+ IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
+#endif
+ /* if BSSID is empty then we disable mandatory bssid mode */
+ if (bssid != NULL)
+ memcpy((u8 *)cmd.host_command_parameters, bssid, ETH_ALEN);
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+#ifdef CONFIG_IEEE80211_WPA
+static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
+{
+ struct host_command cmd = {
+ .host_command = DISASSOCIATION_BSSID,
+ .host_command_sequence = 0,
+ .host_command_length = ETH_ALEN
+ };
+ int err;
+ int len;
+
+ IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
+
+ len = ETH_ALEN;
+ /* The Firmware currently ignores the BSSID and just disassociates from
+ * the currently associated AP -- but in the off chance that a future
+ * firmware does use the BSSID provided here, we go ahead and try and
+ * set it to the currently associated AP's BSSID */
+ memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ return err;
+}
+#endif
+
+/*
+ * Pseudo code for setting up wpa_frame:
+ */
+#if 0
+void x(struct ieee80211_assoc_frame *wpa_assoc)
+{
+ struct ipw2100_wpa_assoc_frame frame;
+ frame->fixed_ie_mask = IPW_WPA_CAPABILTIES |
+ IPW_WPA_LISTENINTERVAL |
+ IPW_WPA_AP_ADDRESS;
+ frame->capab_info = wpa_assoc->capab_info;
+ frame->lisen_interval = wpa_assoc->listent_interval;
+ memcpy(frame->current_ap, wpa_assoc->current_ap, ETH_ALEN);
+
+ /* UNKNOWN -- I'm not postivive about this part; don't have any WPA
+ * setup here to test it with.
+ *
+ * Walk the IEs in the wpa_assoc and figure out the total size of all
+ * that data. Stick that into frame->var_ie_len. Then memcpy() all of
+ * the IEs from wpa_frame into frame.
+ */
+ frame->var_ie_len = calculate_ie_len(wpa_assoc);
+ memcpy(frame->var_ie, wpa_assoc->variable, frame->var_ie_len);
+
+ ipw2100_set_wpa_ie(priv, &frame, 0);
+}
+#endif
+
+
+
+
+static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
+ struct ipw2100_wpa_assoc_frame *, int)
+__attribute__ ((unused));
+
+static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
+ struct ipw2100_wpa_assoc_frame *wpa_frame,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = SET_WPA_IE,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
+ };
+ int err;
+
+ IPW_DEBUG_HC("SET_WPA_IE\n");
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ memcpy(cmd.host_command_parameters, wpa_frame,
+ sizeof(struct ipw2100_wpa_assoc_frame));
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode) {
+ if (ipw2100_enable_adapter(priv))
+ err = -EIO;
+ }
+
+ return err;
+}
+
+struct security_info_params {
+ u32 allowed_ciphers;
+ u16 version;
+ u8 auth_mode;
+ u8 replay_counters_number;
+ u8 unicast_using_group;
+} __attribute__ ((packed));
+
+int ipw2100_set_security_information(struct ipw2100_priv *priv,
+ int auth_mode,
+ int security_level,
+ int unicast_using_group,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = SET_SECURITY_INFORMATION,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(struct security_info_params)
+ };
+ struct security_info_params *security =
+ (struct security_info_params *)&cmd.host_command_parameters;
+ int err;
+ memset(security, 0, sizeof(*security));
+
+ /* If shared key AP authentication is turned on, then we need to
+ * configure the firmware to try and use it.
+ *
+ * Actual data encryption/decryption is handled by the host. */
+ security->auth_mode = auth_mode;
+ security->unicast_using_group = unicast_using_group;
+
+ switch (security_level) {
+ default:
+ case SEC_LEVEL_0:
+ security->allowed_ciphers = IPW_NONE_CIPHER;
+ break;
+ case SEC_LEVEL_1:
+ security->allowed_ciphers = IPW_WEP40_CIPHER |
+ IPW_WEP104_CIPHER;
+ break;
+ case SEC_LEVEL_2:
+ security->allowed_ciphers = IPW_WEP40_CIPHER |
+ IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
+ break;
+ case SEC_LEVEL_2_CKIP:
+ security->allowed_ciphers = IPW_WEP40_CIPHER |
+ IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
+ break;
+ case SEC_LEVEL_3:
+ security->allowed_ciphers = IPW_WEP40_CIPHER |
+ IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
+ break;
+ }
+
+ IPW_DEBUG_HC(
+ "SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
+ security->auth_mode, security->allowed_ciphers, security_level);
+
+ security->replay_counters_number = 0;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+int ipw2100_set_tx_power(struct ipw2100_priv *priv,
+ u32 tx_power)
+{
+ struct host_command cmd = {
+ .host_command = TX_POWER_INDEX,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err = 0;
+
+ cmd.host_command_parameters[0] = tx_power;
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC)
+ err = ipw2100_hw_send_command(priv, &cmd);
+ if (!err)
+ priv->tx_power = tx_power;
+
+ return 0;
+}
+
+int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
+ u32 interval, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = BEACON_INTERVAL,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = interval;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode) {
+ err = ipw2100_enable_adapter(priv);
+ if (err)
+ return err;
+ }
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+
+void ipw2100_queues_initialize(struct ipw2100_priv *priv)
+{
+ ipw2100_tx_initialize(priv);
+ ipw2100_rx_initialize(priv);
+ ipw2100_msg_initialize(priv);
+}
+
+void ipw2100_queues_free(struct ipw2100_priv *priv)
+{
+ ipw2100_tx_free(priv);
+ ipw2100_rx_free(priv);
+ ipw2100_msg_free(priv);
+}
+
+int ipw2100_queues_allocate(struct ipw2100_priv *priv)
+{
+ if (ipw2100_tx_allocate(priv) ||
+ ipw2100_rx_allocate(priv) ||
+ ipw2100_msg_allocate(priv))
+ goto fail;
+
+ return 0;
+
+ fail:
+ ipw2100_tx_free(priv);
+ ipw2100_rx_free(priv);
+ ipw2100_msg_free(priv);
+ return -ENOMEM;
+}
+
+#define IPW_PRIVACY_CAPABLE 0x0008
+
+static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
+ int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = WEP_FLAGS,
+ .host_command_sequence = 0,
+ .host_command_length = 4
+ };
+ int err;
+
+ cmd.host_command_parameters[0] = flags;
+
+ IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+ }
+
+ /* send cmd to firmware */
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+struct ipw2100_wep_key {
+ u8 idx;
+ u8 len;
+ u8 key[13];
+};
+
+/* Macros to ease up priting WEP keys */
+#define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
+#define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
+#define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
+#define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
+
+
+/**
+ * Set a the wep key
+ *
+ * @priv: struct to work on
+ * @idx: index of the key we want to set
+ * @key: ptr to the key data to set
+ * @len: length of the buffer at @key
+ * @batch_mode: FIXME perform the operation in batch mode, not
+ * disabling the device.
+ *
+ * @returns 0 if OK, < 0 errno code on error.
+ *
+ * Fill out a command structure with the new wep key, length an
+ * index and send it down the wire.
+ */
+static int ipw2100_set_key(struct ipw2100_priv *priv,
+ int idx, char *key, int len, int batch_mode)
+{
+ int keylen = len ? (len <= 5 ? 5 : 13) : 0;
+ struct host_command cmd = {
+ .host_command = WEP_KEY_INFO,
+ .host_command_sequence = 0,
+ .host_command_length = sizeof(struct ipw2100_wep_key),
+ };
+ struct ipw2100_wep_key *wep_key = (void*)cmd.host_command_parameters;
+ int err;
+
+ IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
+ idx, keylen, len);
+
+ /* NOTE: We don't check cached values in case the firmware was reset
+ * or some other problem is occuring. If the user is setting the key,
+ * then we push the change */
+
+ wep_key->idx = idx;
+ wep_key->len = keylen;
+
+ if (keylen) {
+ memcpy(wep_key->key, key, len);
+ memset(wep_key->key + len, 0, keylen - len);
+ }
+
+ /* Will be optimized out on debug not being configured in */
+ if (keylen == 0)
+ IPW_DEBUG_WEP("%s: Clearing key %d\n",
+ priv->net_dev->name, wep_key->idx);
+ else if (keylen == 5)
+ IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
+ priv->net_dev->name, wep_key->idx, wep_key->len,
+ WEP_STR_64(wep_key->key));
+ else
+ IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
+ "\n",
+ priv->net_dev->name, wep_key->idx, wep_key->len,
+ WEP_STR_128(wep_key->key));
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+ }
+
+ /* send cmd to firmware */
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode) {
+ int err2 = ipw2100_enable_adapter(priv);
+ if (err == 0)
+ err = err2;
+ }
+ return err;
+}
+
+static int ipw2100_set_key_index(struct ipw2100_priv *priv,
+ int idx, int batch_mode)
+{
+ struct host_command cmd = {
+ .host_command = WEP_KEY_INDEX,
+ .host_command_sequence = 0,
+ .host_command_length = 4,
+ .host_command_parameters[0] = idx,
+ };
+ int err;
+
+ IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
+
+ if (idx < 0 || idx > 3)
+ return -EINVAL;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err) {
+ IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+ priv->net_dev->name, err);
+ return err;
+ }
+ }
+
+ /* send cmd to firmware */
+ err = ipw2100_hw_send_command(priv, &cmd);
+
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+
+static int ipw2100_configure_security(struct ipw2100_priv *priv,
+ int batch_mode)
+{
+ int i, err, auth_mode, sec_level, use_group;
+
+ if (!(priv->status & STATUS_RUNNING))
+ return 0;
+
+ if (!batch_mode) {
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+ }
+
+ if (!priv->sec.enabled) {
+ err = ipw2100_set_security_information(
+ priv, IPW_AUTH_OPEN, SEC_LEVEL_0, 0, 1);
+ } else {
+ auth_mode = IPW_AUTH_OPEN;
+ if ((priv->sec.flags & SEC_AUTH_MODE) &&
+ (priv->sec.auth_mode == WLAN_AUTH_SHARED_KEY))
+ auth_mode = IPW_AUTH_SHARED;
+
+ sec_level = SEC_LEVEL_0;
+ if (priv->sec.flags & SEC_LEVEL)
+ sec_level = priv->sec.level;
+
+ use_group = 0;
+ if (priv->sec.flags & SEC_UNICAST_GROUP)
+ use_group = priv->sec.unicast_uses_group;
+
+ err = ipw2100_set_security_information(
+ priv, auth_mode, sec_level, use_group, 1);
+ }
+
+ if (err)
+ goto exit;
+
+ if (priv->sec.enabled) {
+ for (i = 0; i < 4; i++) {
+ if (!(priv->sec.flags & (1 << i))) {
+ memset(priv->sec.keys[i], 0, WEP_KEY_LEN);
+ priv->sec.key_sizes[i] = 0;
+ } else {
+ err = ipw2100_set_key(priv, i,
+ priv->sec.keys[i],
+ priv->sec.key_sizes[i],
+ 1);
+ if (err)
+ goto exit;
+ }
+ }
+
+ ipw2100_set_key_index(priv, priv->ieee->tx_keyidx, 1);
+ }
+
+ /* Always enable privacy so the Host can filter WEP packets if
+ * encrypted data is sent up */
+ err = ipw2100_set_wep_flags(
+ priv, priv->sec.enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
+ if (err)
+ goto exit;
+
+ priv->status &= ~STATUS_SECURITY_UPDATED;
+
+ exit:
+ if (!batch_mode)
+ ipw2100_enable_adapter(priv);
+
+ return err;
+}
+
+static void ipw2100_security_work(struct ipw2100_priv *priv)
+{
+ /* If we happen to have reconnected before we get a chance to
+ * process this, then update the security settings--which causes
+ * a disassociation to occur */
+ if (!(priv->status & STATUS_ASSOCIATED) &&
+ priv->status & STATUS_SECURITY_UPDATED)
+ ipw2100_configure_security(priv, 0);
+}
+
+static void shim__set_security(struct net_device *dev,
+ struct ieee80211_security *sec)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int i, force_update = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED))
+ goto done;
+
+ for (i = 0; i < 4; i++) {
+ if (sec->flags & (1 << i)) {
+ priv->sec.key_sizes[i] = sec->key_sizes[i];
+ if (sec->key_sizes[i] == 0)
+ priv->sec.flags &= ~(1 << i);
+ else
+ memcpy(priv->sec.keys[i], sec->keys[i],
+ sec->key_sizes[i]);
+ priv->sec.flags |= (1 << i);
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+ }
+
+ if ((sec->flags & SEC_ACTIVE_KEY) &&
+ priv->sec.active_key != sec->active_key) {
+ if (sec->active_key <= 3) {
+ priv->sec.active_key = sec->active_key;
+ priv->sec.flags |= SEC_ACTIVE_KEY;
+ } else
+ priv->sec.flags &= ~SEC_ACTIVE_KEY;
+
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+
+ if ((sec->flags & SEC_AUTH_MODE) &&
+ (priv->sec.auth_mode != sec->auth_mode)) {
+ priv->sec.auth_mode = sec->auth_mode;
+ priv->sec.flags |= SEC_AUTH_MODE;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+
+ if (sec->flags & SEC_ENABLED &&
+ priv->sec.enabled != sec->enabled) {
+ priv->sec.flags |= SEC_ENABLED;
+ priv->sec.enabled = sec->enabled;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ force_update = 1;
+ }
+
+ if (sec->flags & SEC_LEVEL &&
+ priv->sec.level != sec->level) {
+ priv->sec.level = sec->level;
+ priv->sec.flags |= SEC_LEVEL;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+
+ IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
+ priv->sec.flags & (1<<8) ? '1' : '0',
+ priv->sec.flags & (1<<7) ? '1' : '0',
+ priv->sec.flags & (1<<6) ? '1' : '0',
+ priv->sec.flags & (1<<5) ? '1' : '0',
+ priv->sec.flags & (1<<4) ? '1' : '0',
+ priv->sec.flags & (1<<3) ? '1' : '0',
+ priv->sec.flags & (1<<2) ? '1' : '0',
+ priv->sec.flags & (1<<1) ? '1' : '0',
+ priv->sec.flags & (1<<0) ? '1' : '0');
+
+/* As a temporary work around to enable WPA until we figure out why
+ * wpa_supplicant toggles the security capability of the driver, which
+ * forces a disassocation with force_update...
+ *
+ * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
+ if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
+ ipw2100_configure_security(priv, 0);
+done:
+ up(&priv->action_sem);
+}
+
+static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
+{
+ int err;
+ int batch_mode = 1;
+ u8 *bssid;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ err = ipw2100_disable_adapter(priv);
+ if (err)
+ return err;
+#ifdef CONFIG_IPW2100_MONITOR
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+ err = ipw2100_set_channel(priv, priv->channel, batch_mode);
+ if (err)
+ return err;
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+ }
+#endif /* CONFIG_IPW2100_MONITOR */
+
+ err = ipw2100_read_mac_address(priv);
+ if (err)
+ return -EIO;
+
+ err = ipw2100_set_mac_address(priv, batch_mode);
+ if (err)
+ return err;
+
+ err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
+ if (err)
+ return err;
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ err = ipw2100_set_channel(priv, priv->channel, batch_mode);
+ if (err)
+ return err;
+ }
+
+ err = ipw2100_system_config(priv, batch_mode);
+ if (err)
+ return err;
+
+ err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
+ if (err)
+ return err;
+
+ /* Default to power mode OFF */
+ err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
+ if (err)
+ return err;
+
+ err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
+ if (err)
+ return err;
+
+ if (priv->config & CFG_STATIC_BSSID)
+ bssid = priv->bssid;
+ else
+ bssid = NULL;
+ err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
+ if (err)
+ return err;
+
+ if (priv->config & CFG_STATIC_ESSID)
+ err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
+ batch_mode);
+ else
+ err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
+ if (err)
+ return err;
+
+ err = ipw2100_configure_security(priv, batch_mode);
+ if (err)
+ return err;
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ err = ipw2100_set_ibss_beacon_interval(
+ priv, priv->beacon_interval, batch_mode);
+ if (err)
+ return err;
+
+ err = ipw2100_set_tx_power(priv, priv->tx_power);
+ if (err)
+ return err;
+ }
+
+ /*
+ err = ipw2100_set_fragmentation_threshold(
+ priv, priv->frag_threshold, batch_mode);
+ if (err)
+ return err;
+ */
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+
+/*************************************************************************
+ *
+ * EXTERNALLY CALLED METHODS
+ *
+ *************************************************************************/
+
+/* This method is called by the network layer -- not to be confused with
+ * ipw2100_set_mac_address() declared above called by this driver (and this
+ * method as well) to talk to the firmware */
+static int ipw2100_set_address(struct net_device *dev, void *p)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct sockaddr *addr = p;
+ int err = 0;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ down(&priv->action_sem);
+
+ priv->config |= CFG_CUSTOM_MAC;
+ memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
+
+ err = ipw2100_set_mac_address(priv, 0);
+ if (err)
+ goto done;
+
+ priv->reset_backoff = 0;
+ up(&priv->action_sem);
+ ipw2100_reset_adapter(priv);
+ return 0;
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_open(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ unsigned long flags;
+ IPW_DEBUG_INFO("dev->open\n");
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+ if (priv->status & STATUS_ASSOCIATED)
+ netif_start_queue(dev);
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ return 0;
+}
+
+static int ipw2100_close(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ unsigned long flags;
+ struct list_head *element;
+ struct ipw2100_tx_packet *packet;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (priv->status & STATUS_ASSOCIATED)
+ netif_carrier_off(dev);
+ netif_stop_queue(dev);
+
+ /* Flush the TX queue ... */
+ while (!list_empty(&priv->tx_pend_list)) {
+ element = priv->tx_pend_list.next;
+ packet = list_entry(element, struct ipw2100_tx_packet, list);
+
+ list_del(element);
+ DEC_STAT(&priv->tx_pend_stat);
+
+ ieee80211_txb_free(packet->info.d_struct.txb);
+ packet->info.d_struct.txb = NULL;
+
+ list_add_tail(element, &priv->tx_free_list);
+ INC_STAT(&priv->tx_free_stat);
+ }
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+
+ IPW_DEBUG_INFO("exit\n");
+
+ return 0;
+}
+
+
+
+/*
+ * TODO: Fix this function... its just wrong
+ */
+static void ipw2100_tx_timeout(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ priv->ieee->stats.tx_errors++;
+
+#ifdef CONFIG_IPW2100_MONITOR
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+ return;
+#endif
+
+ IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
+ dev->name);
+ schedule_reset(priv);
+}
+
+
+/*
+ * TODO: reimplement it so that it reads statistics
+ * from the adapter using ordinal tables
+ * instead of/in addition to collecting them
+ * in the driver
+ */
+static struct net_device_stats *ipw2100_stats(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ return &priv->ieee->stats;
+}
+
+/* Support for wpa_supplicant. Will be replaced with WEXT once
+ * they get WPA support. */
+#ifdef CONFIG_IEEE80211_WPA
+
+/* following definitions must match definitions in driver_ipw2100.c */
+
+#define IPW2100_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30
+
+#define IPW2100_CMD_SET_WPA_PARAM 1
+#define IPW2100_CMD_SET_WPA_IE 2
+#define IPW2100_CMD_SET_ENCRYPTION 3
+#define IPW2100_CMD_MLME 4
+
+#define IPW2100_PARAM_WPA_ENABLED 1
+#define IPW2100_PARAM_TKIP_COUNTERMEASURES 2
+#define IPW2100_PARAM_DROP_UNENCRYPTED 3
+#define IPW2100_PARAM_PRIVACY_INVOKED 4
+#define IPW2100_PARAM_AUTH_ALGS 5
+#define IPW2100_PARAM_IEEE_802_1X 6
+
+#define IPW2100_MLME_STA_DEAUTH 1
+#define IPW2100_MLME_STA_DISASSOC 2
+
+#define IPW2100_CRYPT_ERR_UNKNOWN_ALG 2
+#define IPW2100_CRYPT_ERR_UNKNOWN_ADDR 3
+#define IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED 4
+#define IPW2100_CRYPT_ERR_KEY_SET_FAILED 5
+#define IPW2100_CRYPT_ERR_TX_KEY_SET_FAILED 6
+#define IPW2100_CRYPT_ERR_CARD_CONF_FAILED 7
+
+#define IPW2100_CRYPT_ALG_NAME_LEN 16
+
+struct ipw2100_param {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ union {
+ struct {
+ u8 name;
+ u32 value;
+ } wpa_param;
+ struct {
+ u32 len;
+ u8 *data;
+ } wpa_ie;
+ struct{
+ int command;
+ int reason_code;
+ } mlme;
+ struct {
+ u8 alg[IPW2100_CRYPT_ALG_NAME_LEN];
+ u8 set_tx;
+ u32 err;
+ u8 idx;
+ u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+ u16 key_len;
+ u8 key[0];
+ } crypt;
+
+ } u;
+};
+
+/* end of driver_ipw2100.c code */
+
+static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value){
+
+ struct ieee80211_device *ieee = priv->ieee;
+ struct ieee80211_security sec = {
+ .flags = SEC_LEVEL | SEC_ENABLED,
+ };
+ int ret = 0;
+
+ ieee->wpa_enabled = value;
+
+ if (value){
+ sec.level = SEC_LEVEL_3;
+ sec.enabled = 1;
+ } else {
+ sec.level = SEC_LEVEL_0;
+ sec.enabled = 0;
+ }
+
+ if (ieee->set_security)
+ ieee->set_security(ieee->dev, &sec);
+ else
+ ret = -EOPNOTSUPP;
+
+ return ret;
+}
+
+#define AUTH_ALG_OPEN_SYSTEM 0x1
+#define AUTH_ALG_SHARED_KEY 0x2
+
+static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value){
+
+ struct ieee80211_device *ieee = priv->ieee;
+ struct ieee80211_security sec = {
+ .flags = SEC_AUTH_MODE,
+ };
+ int ret = 0;
+
+ if (value & AUTH_ALG_SHARED_KEY){
+ sec.auth_mode = WLAN_AUTH_SHARED_KEY;
+ ieee->open_wep = 0;
+ } else {
+ sec.auth_mode = WLAN_AUTH_OPEN;
+ ieee->open_wep = 1;
+ }
+
+ if (ieee->set_security)
+ ieee->set_security(ieee->dev, &sec);
+ else
+ ret = -EOPNOTSUPP;
+
+ return ret;
+}
+
+
+static int ipw2100_wpa_set_param(struct net_device *dev, u8 name, u32 value){
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int ret=0;
+
+ switch(name){
+ case IPW2100_PARAM_WPA_ENABLED:
+ ret = ipw2100_wpa_enable(priv, value);
+ break;
+
+ case IPW2100_PARAM_TKIP_COUNTERMEASURES:
+ priv->ieee->tkip_countermeasures=value;
+ break;
+
+ case IPW2100_PARAM_DROP_UNENCRYPTED:
+ priv->ieee->drop_unencrypted=value;
+ break;
+
+ case IPW2100_PARAM_PRIVACY_INVOKED:
+ priv->ieee->privacy_invoked=value;
+ break;
+
+ case IPW2100_PARAM_AUTH_ALGS:
+ ret = ipw2100_wpa_set_auth_algs(priv, value);
+ break;
+
+ case IPW2100_PARAM_IEEE_802_1X:
+ priv->ieee->ieee802_1x=value;
+ break;
+
+ default:
+ IPW_DEBUG_ERROR("%s: Unknown WPA param: %d\n",
+ dev->name, name);
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+static int ipw2100_wpa_mlme(struct net_device *dev, int command, int reason){
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int ret=0;
+
+ switch(command){
+ case IPW2100_MLME_STA_DEAUTH:
+ // silently ignore
+ break;
+
+ case IPW2100_MLME_STA_DISASSOC:
+ ipw2100_disassociate_bssid(priv);
+ break;
+
+ default:
+ IPW_DEBUG_ERROR("%s: Unknown MLME request: %d\n",
+ dev->name, command);
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+
+void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
+ char *wpa_ie, int wpa_ie_len){
+
+ struct ipw2100_wpa_assoc_frame frame;
+
+ frame.fixed_ie_mask = 0;
+
+ /* copy WPA IE */
+ memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
+ frame.var_ie_len = wpa_ie_len;
+
+ /* make sure WPA is enabled */
+ ipw2100_wpa_enable(priv, 1);
+ ipw2100_set_wpa_ie(priv, &frame, 0);
+}
+
+
+static int ipw2100_wpa_set_wpa_ie(struct net_device *dev,
+ struct ipw2100_param *param, int plen){
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee;
+ u8 *buf;
+
+ if (! ieee->wpa_enabled)
+ return -EOPNOTSUPP;
+
+ if (param->u.wpa_ie.len > MAX_WPA_IE_LEN ||
+ (param->u.wpa_ie.len &&
+ param->u.wpa_ie.data==NULL))
+ return -EINVAL;
+
+ if (param->u.wpa_ie.len){
+ buf = kmalloc(param->u.wpa_ie.len, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ memcpy(buf, param->u.wpa_ie.data, param->u.wpa_ie.len);
+
+ kfree(ieee->wpa_ie);
+ ieee->wpa_ie = buf;
+ ieee->wpa_ie_len = param->u.wpa_ie.len;
+
+ } else {
+ kfree(ieee->wpa_ie);
+ ieee->wpa_ie = NULL;
+ ieee->wpa_ie_len = 0;
+ }
+
+ ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
+
+ return 0;
+}
+
+/* implementation borrowed from hostap driver */
+
+static int ipw2100_wpa_set_encryption(struct net_device *dev,
+ struct ipw2100_param *param, int param_len){
+
+ int ret = 0;
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct ieee80211_device *ieee = priv->ieee;
+ struct ieee80211_crypto_ops *ops;
+ struct ieee80211_crypt_data **crypt;
+
+ struct ieee80211_security sec = {
+ .flags = 0,
+ };
+
+ param->u.crypt.err = 0;
+ param->u.crypt.alg[IPW2100_CRYPT_ALG_NAME_LEN - 1] = '\0';
+
+ if (param_len !=
+ (int) ((char *) param->u.crypt.key - (char *) param) +
+ param->u.crypt.key_len){
+ IPW_DEBUG_INFO("Len mismatch %d, %d\n", param_len, param->u.crypt.key_len);
+ return -EINVAL;
+ }
+ if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
+ param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
+ param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+ if (param->u.crypt.idx >= WEP_KEYS)
+ return -EINVAL;
+ crypt = &ieee->crypt[param->u.crypt.idx];
+ } else {
+ return -EINVAL;
+ }
+
+ if (strcmp(param->u.crypt.alg, "none") == 0) {
+ if (crypt){
+ sec.enabled = 0;
+ sec.level = SEC_LEVEL_0;
+ sec.flags |= SEC_ENABLED | SEC_LEVEL;
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+ }
+ goto done;
+ }
+ sec.enabled = 1;
+ sec.flags |= SEC_ENABLED;
+
+ ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+ if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
+ request_module("ieee80211_crypt_wep");
+ ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+ } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
+ request_module("ieee80211_crypt_tkip");
+ ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+ } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
+ request_module("ieee80211_crypt_ccmp");
+ ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+ }
+ if (ops == NULL) {
+ IPW_DEBUG_INFO("%s: unknown crypto alg '%s'\n",
+ dev->name, param->u.crypt.alg);
+ param->u.crypt.err = IPW2100_CRYPT_ERR_UNKNOWN_ALG;
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (*crypt == NULL || (*crypt)->ops != ops) {
+ struct ieee80211_crypt_data *new_crypt;
+
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+ new_crypt = (struct ieee80211_crypt_data *)
+ kmalloc(sizeof(struct ieee80211_crypt_data), GFP_KERNEL);
+ if (new_crypt == NULL) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
+ new_crypt->ops = ops;
+ if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx);
+
+ if (new_crypt->priv == NULL) {
+ kfree(new_crypt);
+ param->u.crypt.err =
+ IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED;
+ ret = -EINVAL;
+ goto done;
+ }
+
+ *crypt = new_crypt;
+ }
+
+ if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key &&
+ (*crypt)->ops->set_key(param->u.crypt.key,
+ param->u.crypt.key_len, param->u.crypt.seq,
+ (*crypt)->priv) < 0) {
+ IPW_DEBUG_INFO("%s: key setting failed\n",
+ dev->name);
+ param->u.crypt.err = IPW2100_CRYPT_ERR_KEY_SET_FAILED;
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (param->u.crypt.set_tx){
+ ieee->tx_keyidx = param->u.crypt.idx;
+ sec.active_key = param->u.crypt.idx;
+ sec.flags |= SEC_ACTIVE_KEY;
+ }
+
+ if (ops->name != NULL){
+
+ if (strcmp(ops->name, "WEP") == 0) {
+ memcpy(sec.keys[param->u.crypt.idx], param->u.crypt.key, param->u.crypt.key_len);
+ sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len;
+ sec.flags |= (1 << param->u.crypt.idx);
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_1;
+ } else if (strcmp(ops->name, "TKIP") == 0) {
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_2;
+ } else if (strcmp(ops->name, "CCMP") == 0) {
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_3;
+ }
+ }
+ done:
+ if (ieee->set_security)
+ ieee->set_security(ieee->dev, &sec);
+
+ /* Do not reset port if card is in Managed mode since resetting will
+ * generate new IEEE 802.11 authentication which may end up in looping
+ * with IEEE 802.1X. If your hardware requires a reset after WEP
+ * configuration (for example... Prism2), implement the reset_port in
+ * the callbacks structures used to initialize the 802.11 stack. */
+ if (ieee->reset_on_keychange &&
+ ieee->iw_mode != IW_MODE_INFRA &&
+ ieee->reset_port &&
+ ieee->reset_port(dev)) {
+ IPW_DEBUG_INFO("%s: reset_port failed\n", dev->name);
+ param->u.crypt.err = IPW2100_CRYPT_ERR_CARD_CONF_FAILED;
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+
+static int ipw2100_wpa_supplicant(struct net_device *dev, struct iw_point *p){
+
+ struct ipw2100_param *param;
+ int ret=0;
+
+ IPW_DEBUG_IOCTL("wpa_supplicant: len=%d\n", p->length);
+
+ if (p->length < sizeof(struct ipw2100_param) || !p->pointer)
+ return -EINVAL;
+
+ param = (struct ipw2100_param *)kmalloc(p->length, GFP_KERNEL);
+ if (param == NULL)
+ return -ENOMEM;
+
+ if (copy_from_user(param, p->pointer, p->length)){
+ kfree(param);
+ return -EFAULT;
+ }
+
+ switch (param->cmd){
+
+ case IPW2100_CMD_SET_WPA_PARAM:
+ ret = ipw2100_wpa_set_param(dev, param->u.wpa_param.name,
+ param->u.wpa_param.value);
+ break;
+
+ case IPW2100_CMD_SET_WPA_IE:
+ ret = ipw2100_wpa_set_wpa_ie(dev, param, p->length);
+ break;
+
+ case IPW2100_CMD_SET_ENCRYPTION:
+ ret = ipw2100_wpa_set_encryption(dev, param, p->length);
+ break;
+
+ case IPW2100_CMD_MLME:
+ ret = ipw2100_wpa_mlme(dev, param->u.mlme.command,
+ param->u.mlme.reason_code);
+ break;
+
+ default:
+ IPW_DEBUG_ERROR("%s: Unknown WPA supplicant request: %d\n",
+ dev->name, param->cmd);
+ ret = -EOPNOTSUPP;
+
+ }
+
+ if (ret == 0 && copy_to_user(p->pointer, param, p->length))
+ ret = -EFAULT;
+
+ kfree(param);
+ return ret;
+}
+#endif /* CONFIG_IEEE80211_WPA */
+
+static int ipw2100_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+#ifdef CONFIG_IEEE80211_WPA
+ struct iwreq *wrq = (struct iwreq *) rq;
+ int ret=-1;
+ switch (cmd){
+ case IPW2100_IOCTL_WPA_SUPPLICANT:
+ ret = ipw2100_wpa_supplicant(dev, &wrq->u.data);
+ return ret;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+#endif /* CONFIG_IEEE80211_WPA */
+
+ return -EOPNOTSUPP;
+}
+
+
+static void ipw_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ char fw_ver[64], ucode_ver[64];
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+
+ ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
+ ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
+
+ snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
+ fw_ver, priv->eeprom_version, ucode_ver);
+
+ strcpy(info->bus_info, pci_name(priv->pci_dev));
+}
+
+static u32 ipw2100_ethtool_get_link(struct net_device *dev)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
+}
+
+
+static struct ethtool_ops ipw2100_ethtool_ops = {
+ .get_link = ipw2100_ethtool_get_link,
+ .get_drvinfo = ipw_ethtool_get_drvinfo,
+};
+
+static void ipw2100_hang_check(void *adapter)
+{
+ struct ipw2100_priv *priv = adapter;
+ unsigned long flags;
+ u32 rtc = 0xa5a5a5a5;
+ u32 len = sizeof(rtc);
+ int restart = 0;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (priv->fatal_error != 0) {
+ /* If fatal_error is set then we need to restart */
+ IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
+ priv->net_dev->name);
+
+ restart = 1;
+ } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
+ (rtc == priv->last_rtc)) {
+ /* Check if firmware is hung */
+ IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
+ priv->net_dev->name);
+
+ restart = 1;
+ }
+
+ if (restart) {
+ /* Kill timer */
+ priv->stop_hang_check = 1;
+ priv->hangs++;
+
+ /* Restart the NIC */
+ schedule_reset(priv);
+ }
+
+ priv->last_rtc = rtc;
+
+ if (!priv->stop_hang_check)
+ queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
+
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+}
+
+
+static void ipw2100_rf_kill(void *adapter)
+{
+ struct ipw2100_priv *priv = adapter;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->low_lock, flags);
+
+ if (rf_kill_active(priv)) {
+ IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
+ if (!priv->stop_rf_kill)
+ queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
+ goto exit_unlock;
+ }
+
+ /* RF Kill is now disabled, so bring the device back up */
+
+ if (!(priv->status & STATUS_RF_KILL_MASK)) {
+ IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
+ "device\n");
+ schedule_reset(priv);
+ } else
+ IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
+ "enabled\n");
+
+ exit_unlock:
+ spin_unlock_irqrestore(&priv->low_lock, flags);
+}
+
+static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
+
+/* Look into using netdev destructor to shutdown ieee80211? */
+
+static struct net_device *ipw2100_alloc_device(
+ struct pci_dev *pci_dev,
+ char *base_addr,
+ unsigned long mem_start,
+ unsigned long mem_len)
+{
+ struct ipw2100_priv *priv;
+ struct net_device *dev;
+
+ dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
+ if (!dev)
+ return NULL;
+ priv = ieee80211_priv(dev);
+ priv->ieee = netdev_priv(dev);
+ priv->pci_dev = pci_dev;
+ priv->net_dev = dev;
+
+ priv->ieee->hard_start_xmit = ipw2100_tx;
+ priv->ieee->set_security = shim__set_security;
+
+ dev->open = ipw2100_open;
+ dev->stop = ipw2100_close;
+ dev->init = ipw2100_net_init;
+ dev->do_ioctl = ipw2100_ioctl;
+ dev->get_stats = ipw2100_stats;
+ dev->ethtool_ops = &ipw2100_ethtool_ops;
+ dev->tx_timeout = ipw2100_tx_timeout;
+ dev->wireless_handlers = &ipw2100_wx_handler_def;
+ dev->get_wireless_stats = ipw2100_wx_wireless_stats;
+ dev->set_mac_address = ipw2100_set_address;
+ dev->watchdog_timeo = 3*HZ;
+ dev->irq = 0;
+
+ dev->base_addr = (unsigned long)base_addr;
+ dev->mem_start = mem_start;
+ dev->mem_end = dev->mem_start + mem_len - 1;
+
+ /* NOTE: We don't use the wireless_handlers hook
+ * in dev as the system will start throwing WX requests
+ * to us before we're actually initialized and it just
+ * ends up causing problems. So, we just handle
+ * the WX extensions through the ipw2100_ioctl interface */
+
+
+ /* memset() puts everything to 0, so we only have explicitely set
+ * those values that need to be something else */
+
+ /* If power management is turned on, default to AUTO mode */
+ priv->power_mode = IPW_POWER_AUTO;
+
+
+
+#ifdef CONFIG_IEEE80211_WPA
+ priv->ieee->wpa_enabled = 0;
+ priv->ieee->tkip_countermeasures = 0;
+ priv->ieee->drop_unencrypted = 0;
+ priv->ieee->privacy_invoked = 0;
+ priv->ieee->ieee802_1x = 1;
+#endif /* CONFIG_IEEE80211_WPA */
+
+ /* Set module parameters */
+ switch (mode) {
+ case 1:
+ priv->ieee->iw_mode = IW_MODE_ADHOC;
+ break;
+#ifdef CONFIG_IPW2100_MONITOR
+ case 2:
+ priv->ieee->iw_mode = IW_MODE_MONITOR;
+ break;
+#endif
+ default:
+ case 0:
+ priv->ieee->iw_mode = IW_MODE_INFRA;
+ break;
+ }
+
+ if (disable == 1)
+ priv->status |= STATUS_RF_KILL_SW;
+
+ if (channel != 0 &&
+ ((channel >= REG_MIN_CHANNEL) &&
+ (channel <= REG_MAX_CHANNEL))) {
+ priv->config |= CFG_STATIC_CHANNEL;
+ priv->channel = channel;
+ }
+
+ if (associate)
+ priv->config |= CFG_ASSOCIATE;
+
+ priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
+ priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
+ priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
+ priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
+ priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
+ priv->tx_power = IPW_TX_POWER_DEFAULT;
+ priv->tx_rates = DEFAULT_TX_RATES;
+
+ strcpy(priv->nick, "ipw2100");
+
+ spin_lock_init(&priv->low_lock);
+ sema_init(&priv->action_sem, 1);
+ sema_init(&priv->adapter_sem, 1);
+
+ init_waitqueue_head(&priv->wait_command_queue);
+
+ netif_carrier_off(dev);
+
+ INIT_LIST_HEAD(&priv->msg_free_list);
+ INIT_LIST_HEAD(&priv->msg_pend_list);
+ INIT_STAT(&priv->msg_free_stat);
+ INIT_STAT(&priv->msg_pend_stat);
+
+ INIT_LIST_HEAD(&priv->tx_free_list);
+ INIT_LIST_HEAD(&priv->tx_pend_list);
+ INIT_STAT(&priv->tx_free_stat);
+ INIT_STAT(&priv->tx_pend_stat);
+
+ INIT_LIST_HEAD(&priv->fw_pend_list);
+ INIT_STAT(&priv->fw_pend_stat);
+
+
+#ifdef CONFIG_SOFTWARE_SUSPEND2
+ priv->workqueue = create_workqueue(DRV_NAME, 0);
+#else
+ priv->workqueue = create_workqueue(DRV_NAME);
+#endif
+ INIT_WORK(&priv->reset_work,
+ (void (*)(void *))ipw2100_reset_adapter, priv);
+ INIT_WORK(&priv->security_work,
+ (void (*)(void *))ipw2100_security_work, priv);
+ INIT_WORK(&priv->wx_event_work,
+ (void (*)(void *))ipw2100_wx_event_work, priv);
+ INIT_WORK(&priv->hang_check, ipw2100_hang_check, priv);
+ INIT_WORK(&priv->rf_kill, ipw2100_rf_kill, priv);
+
+ tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+ ipw2100_irq_tasklet, (unsigned long)priv);
+
+ /* NOTE: We do not start the deferred work for status checks yet */
+ priv->stop_rf_kill = 1;
+ priv->stop_hang_check = 1;
+
+ return dev;
+}
+
+
+
+#define PCI_DMA_32BIT 0x00000000ffffffffULL
+
+static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
+ const struct pci_device_id *ent)
+{
+ unsigned long mem_start, mem_len, mem_flags;
+ char *base_addr = NULL;
+ struct net_device *dev = NULL;
+ struct ipw2100_priv *priv = NULL;
+ int err = 0;
+ int registered = 0;
+ u32 val;
+
+ IPW_DEBUG_INFO("enter\n");
+
+ mem_start = pci_resource_start(pci_dev, 0);
+ mem_len = pci_resource_len(pci_dev, 0);
+ mem_flags = pci_resource_flags(pci_dev, 0);
+
+ if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) {
+ IPW_DEBUG_INFO("weird - resource type is not memory\n");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ base_addr = ioremap_nocache(mem_start, mem_len);
+ if (!base_addr) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling ioremap_nocache.\n");
+ err = -EIO;
+ goto fail;
+ }
+
+ /* allocate and initialize our net_device */
+ dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len);
+ if (!dev) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling ipw2100_alloc_device.\n");
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ /* set up PCI mappings for device */
+ err = pci_enable_device(pci_dev);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling pci_enable_device.\n");
+ return err;
+ }
+
+ priv = ieee80211_priv(dev);
+
+ pci_set_master(pci_dev);
+ pci_set_drvdata(pci_dev, priv);
+
+ err = pci_set_dma_mask(pci_dev, PCI_DMA_32BIT);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling pci_set_dma_mask.\n");
+ pci_disable_device(pci_dev);
+ return err;
+ }
+
+ err = pci_request_regions(pci_dev, DRV_NAME);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling pci_request_regions.\n");
+ pci_disable_device(pci_dev);
+ return err;
+ }
+
+ /* We disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_read_config_dword(pci_dev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
+
+ pci_set_power_state(pci_dev, 0);
+
+ if (!ipw2100_hw_is_adapter_in_system(dev)) {
+ printk(KERN_WARNING DRV_NAME
+ "Device not found via register read.\n");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ SET_NETDEV_DEV(dev, &pci_dev->dev);
+
+ /* Force interrupts to be shut off on the device */
+ priv->status |= STATUS_INT_ENABLED;
+ ipw2100_disable_interrupts(priv);
+
+ /* Allocate and initialize the Tx/Rx queues and lists */
+ if (ipw2100_queues_allocate(priv)) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calilng ipw2100_queues_allocate.\n");
+ err = -ENOMEM;
+ goto fail;
+ }
+ ipw2100_queues_initialize(priv);
+
+ err = request_irq(pci_dev->irq,
+ ipw2100_interrupt, SA_SHIRQ,
+ dev->name, priv);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling request_irq: %d.\n",
+ pci_dev->irq);
+ goto fail;
+ }
+ dev->irq = pci_dev->irq;
+
+ IPW_DEBUG_INFO("Attempting to register device...\n");
+
+ SET_MODULE_OWNER(dev);
+
+ printk(KERN_INFO DRV_NAME
+ ": Detected Intel PRO/Wireless 2100 Network Connection\n");
+
+ /* Bring up the interface. Pre 0.46, after we registered the
+ * network device we would call ipw2100_up. This introduced a race
+ * condition with newer hotplug configurations (network was coming
+ * up and making calls before the device was initialized).
+ *
+ * If we called ipw2100_up before we registered the device, then the
+ * device name wasn't registered. So, we instead use the net_dev->init
+ * member to call a function that then just turns and calls ipw2100_up.
+ * net_dev->init is called after name allocation but before the
+ * notifier chain is called */
+ down(&priv->action_sem);
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME
+ "Error calling register_netdev.\n");
+ goto fail_unlock;
+ }
+ registered = 1;
+
+ IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
+
+ /* perform this after register_netdev so that dev->name is set */
+ sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
+ netif_carrier_off(dev);
+
+ /* If the RF Kill switch is disabled, go ahead and complete the
+ * startup sequence */
+ if (!(priv->status & STATUS_RF_KILL_MASK)) {
+ /* Enable the adapter - sends HOST_COMPLETE */
+ if (ipw2100_enable_adapter(priv)) {
+ printk(KERN_WARNING DRV_NAME
+ ": %s: failed in call to enable adapter.\n",
+ priv->net_dev->name);
+ ipw2100_hw_stop_adapter(priv);
+ err = -EIO;
+ goto fail_unlock;
+ }
+
+ /* Start a scan . . . */
+ ipw2100_set_scan_options(priv);
+ ipw2100_start_scan(priv);
+ }
+
+ IPW_DEBUG_INFO("exit\n");
+
+ priv->status |= STATUS_INITIALIZED;
+
+ up(&priv->action_sem);
+
+ return 0;
+
+ fail_unlock:
+ up(&priv->action_sem);
+
+ fail:
+ if (dev) {
+ if (registered)
+ unregister_netdev(dev);
+
+ ipw2100_hw_stop_adapter(priv);
+
+ ipw2100_disable_interrupts(priv);
+
+ if (dev->irq)
+ free_irq(dev->irq, priv);
+
+ ipw2100_kill_workqueue(priv);
+
+ /* These are safe to call even if they weren't allocated */
+ ipw2100_queues_free(priv);
+ sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
+
+ free_ieee80211(dev);
+ pci_set_drvdata(pci_dev, NULL);
+ }
+
+ if (base_addr)
+ iounmap((char*)base_addr);
+
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+
+ return err;
+}
+
+static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
+{
+ struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+ struct net_device *dev;
+
+ if (priv) {
+ down(&priv->action_sem);
+
+ priv->status &= ~STATUS_INITIALIZED;
+
+ dev = priv->net_dev;
+ sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
+
+#ifdef CONFIG_PM
+ if (ipw2100_firmware.version)
+ ipw2100_release_firmware(priv, &ipw2100_firmware);
+#endif
+ /* Take down the hardware */
+ ipw2100_down(priv);
+
+ /* Release the semaphore so that the network subsystem can
+ * complete any needed calls into the driver... */
+ up(&priv->action_sem);
+
+ /* Unregister the device first - this results in close()
+ * being called if the device is open. If we free storage
+ * first, then close() will crash. */
+ unregister_netdev(dev);
+
+ /* ipw2100_down will ensure that there is no more pending work
+ * in the workqueue's, so we can safely remove them now. */
+ ipw2100_kill_workqueue(priv);
+
+ ipw2100_queues_free(priv);
+
+ /* Free potential debugging firmware snapshot */
+ ipw2100_snapshot_free(priv);
+
+ if (dev->irq)
+ free_irq(dev->irq, priv);
+
+ if (dev->base_addr)
+ iounmap((unsigned char *)dev->base_addr);
+
+ free_ieee80211(dev);
+ }
+
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+
+ IPW_DEBUG_INFO("exit\n");
+}
+
+
+#ifdef CONFIG_PM
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+static int ipw2100_suspend(struct pci_dev *pci_dev, u32 state)
+#else
+static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
+#endif
+{
+ struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+ struct net_device *dev = priv->net_dev;
+
+ IPW_DEBUG_INFO("%s: Going into suspend...\n",
+ dev->name);
+
+ down(&priv->action_sem);
+ if (priv->status & STATUS_INITIALIZED) {
+ /* Take down the device; powers it off, etc. */
+ ipw2100_down(priv);
+ }
+
+ /* Remove the PRESENT state of the device */
+ netif_device_detach(dev);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+ pci_save_state(pci_dev, priv->pm_state);
+#else
+ pci_save_state(pci_dev);
+#endif
+ pci_disable_device (pci_dev);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+ pci_set_power_state(pci_dev, state);
+#else
+ pci_set_power_state(pci_dev, PCI_D3hot);
+#endif
+
+ up(&priv->action_sem);
+
+ return 0;
+}
+
+static int ipw2100_resume(struct pci_dev *pci_dev)
+{
+ struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+ struct net_device *dev = priv->net_dev;
+ u32 val;
+
+ if (IPW2100_PM_DISABLED)
+ return 0;
+
+ down(&priv->action_sem);
+
+ IPW_DEBUG_INFO("%s: Coming out of suspend...\n",
+ dev->name);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+ pci_set_power_state(pci_dev, 0);
+#else
+ pci_set_power_state(pci_dev, PCI_D0);
+#endif
+ pci_enable_device(pci_dev);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+ pci_restore_state(pci_dev, priv->pm_state);
+#else
+ pci_restore_state(pci_dev);
+#endif
+
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
+ * from interfering with C3 CPU state. pci_restore_state won't help
+ * here since it only restores the first 64 bytes pci config header.
+ */
+ pci_read_config_dword(pci_dev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
+
+ /* Set the device back into the PRESENT state; this will also wake
+ * the queue of needed */
+ netif_device_attach(dev);
+
+ /* Bring the device back up */
+ if (!(priv->status & STATUS_RF_KILL_SW))
+ ipw2100_up(priv, 0);
+
+ up(&priv->action_sem);
+
+ return 0;
+}
+#endif
+
+
+#define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
+
+static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
+ IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
+ IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
+ IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
+
+ IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
+
+ IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
+ IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
+ IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
+ IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
+ IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
+
+ IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
+
+ IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
+
+ IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
+ IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
+ IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
+
+ IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
+
+static struct pci_driver ipw2100_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ipw2100_pci_id_table,
+ .probe = ipw2100_pci_init_one,
+ .remove = __devexit_p(ipw2100_pci_remove_one),
+#ifdef CONFIG_PM
+ .suspend = ipw2100_suspend,
+ .resume = ipw2100_resume,
+#endif
+};
+
+
+/**
+ * Initialize the ipw2100 driver/module
+ *
+ * @returns 0 if ok, < 0 errno node con error.
+ *
+ * Note: we cannot init the /proc stuff until the PCI driver is there,
+ * or we risk an unlikely race condition on someone accessing
+ * uninitialized data in the PCI dev struct through /proc.
+ */
+static int __init ipw2100_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
+ printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
+
+#ifdef CONFIG_IEEE80211_NOWEP
+ IPW_DEBUG_INFO(DRV_NAME ": Compiled with WEP disabled.\n");
+#endif
+
+ ret = pci_module_init(&ipw2100_pci_driver);
+
+#ifdef CONFIG_IPW_DEBUG
+ ipw2100_debug_level = debug;
+ driver_create_file(&ipw2100_pci_driver.driver,
+ &driver_attr_debug_level);
+#endif
+
+ return ret;
+}
+
+
+/**
+ * Cleanup ipw2100 driver registration
+ */
+static void __exit ipw2100_exit(void)
+{
+ /* FIXME: IPG: check that we have no instances of the devices open */
+#ifdef CONFIG_IPW_DEBUG
+ driver_remove_file(&ipw2100_pci_driver.driver,
+ &driver_attr_debug_level);
+#endif
+ pci_unregister_driver(&ipw2100_pci_driver);
+}
+
+module_init(ipw2100_init);
+module_exit(ipw2100_exit);
+
+#define WEXT_USECHANNELS 1
+
+const long ipw2100_frequencies[] = {
+ 2412, 2417, 2422, 2427,
+ 2432, 2437, 2442, 2447,
+ 2452, 2457, 2462, 2467,
+ 2472, 2484
+};
+
+#define FREQ_COUNT (sizeof(ipw2100_frequencies) / \
+ sizeof(ipw2100_frequencies[0]))
+
+const long ipw2100_rates_11b[] = {
+ 1000000,
+ 2000000,
+ 5500000,
+ 11000000
+};
+
+#define RATE_COUNT (sizeof(ipw2100_rates_11b) / sizeof(ipw2100_rates_11b[0]))
+
+static int ipw2100_wx_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ if (!(priv->status & STATUS_ASSOCIATED))
+ strcpy(wrqu->name, "unassociated");
+ else
+ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
+
+ IPW_DEBUG_WX("Name: %s\n", wrqu->name);
+ return 0;
+}
+
+
+static int ipw2100_wx_set_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct iw_freq *fwrq = &wrqu->freq;
+ int err = 0;
+
+ if (priv->ieee->iw_mode == IW_MODE_INFRA)
+ return -EOPNOTSUPP;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ /* if setting by freq convert to channel */
+ if (fwrq->e == 1) {
+ if ((fwrq->m >= (int) 2.412e8 &&
+ fwrq->m <= (int) 2.487e8)) {
+ int f = fwrq->m / 100000;
+ int c = 0;
+
+ while ((c < REG_MAX_CHANNEL) &&
+ (f != ipw2100_frequencies[c]))
+ c++;
+
+ /* hack to fall through */
+ fwrq->e = 0;
+ fwrq->m = c + 1;
+ }
+ }
+
+ if (fwrq->e > 0 || fwrq->m > 1000)
+ return -EOPNOTSUPP;
+ else { /* Set the channel */
+ IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
+ err = ipw2100_set_channel(priv, fwrq->m, 0);
+ }
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+
+static int ipw2100_wx_get_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->freq.e = 0;
+
+ /* If we are associated, trying to associate, or have a statically
+ * configured CHANNEL then return that; otherwise return ANY */
+ if (priv->config & CFG_STATIC_CHANNEL ||
+ priv->status & STATUS_ASSOCIATED)
+ wrqu->freq.m = priv->channel;
+ else
+ wrqu->freq.m = 0;
+
+ IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
+ return 0;
+
+}
+
+static int ipw2100_wx_set_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
+
+ if (wrqu->mode == priv->ieee->iw_mode)
+ return 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ switch (wrqu->mode) {
+#ifdef CONFIG_IPW2100_MONITOR
+ case IW_MODE_MONITOR:
+ err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
+ break;
+#endif /* CONFIG_IPW2100_MONITOR */
+ case IW_MODE_ADHOC:
+ err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
+ break;
+ case IW_MODE_INFRA:
+ case IW_MODE_AUTO:
+ default:
+ err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
+ break;
+ }
+
+done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->mode = priv->ieee->iw_mode;
+ IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
+
+ return 0;
+}
+
+
+#define POWER_MODES 5
+
+/* Values are in microsecond */
+const s32 timeout_duration[POWER_MODES] = {
+ 350000,
+ 250000,
+ 75000,
+ 37000,
+ 25000,
+};
+
+const s32 period_duration[POWER_MODES] = {
+ 400000,
+ 700000,
+ 1000000,
+ 1000000,
+ 1000000
+};
+
+static int ipw2100_wx_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct iw_range *range = (struct iw_range *)extra;
+ u16 val;
+ int i, level;
+
+ wrqu->data.length = sizeof(*range);
+ memset(range, 0, sizeof(*range));
+
+ /* Let's try to keep this struct in the same order as in
+ * linux/include/wireless.h
+ */
+
+ /* TODO: See what values we can set, and remove the ones we can't
+ * set, or fill them with some default data.
+ */
+
+ /* ~5 Mb/s real (802.11b) */
+ range->throughput = 5 * 1000 * 1000;
+
+// range->sensitivity; /* signal level threshold range */
+
+ range->max_qual.qual = 100;
+ /* TODO: Find real max RSSI and stick here */
+ range->max_qual.level = 0;
+ range->max_qual.noise = 0;
+ range->max_qual.updated = 7; /* Updated all three */
+
+ range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
+ /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
+ range->avg_qual.noise = 0;
+ range->avg_qual.updated = 7; /* Updated all three */
+
+ range->num_bitrates = RATE_COUNT;
+
+ for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
+ range->bitrate[i] = ipw2100_rates_11b[i];
+ }
+
+ range->min_rts = MIN_RTS_THRESHOLD;
+ range->max_rts = MAX_RTS_THRESHOLD;
+ range->min_frag = MIN_FRAG_THRESHOLD;
+ range->max_frag = MAX_FRAG_THRESHOLD;
+
+ range->min_pmp = period_duration[0]; /* Minimal PM period */
+ range->max_pmp = period_duration[POWER_MODES-1];/* Maximal PM period */
+ range->min_pmt = timeout_duration[POWER_MODES-1]; /* Minimal PM timeout */
+ range->max_pmt = timeout_duration[0];/* Maximal PM timeout */
+
+ /* How to decode max/min PM period */
+ range->pmp_flags = IW_POWER_PERIOD;
+ /* How to decode max/min PM period */
+ range->pmt_flags = IW_POWER_TIMEOUT;
+ /* What PM options are supported */
+ range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
+
+ range->encoding_size[0] = 5;
+ range->encoding_size[1] = 13; /* Different token sizes */
+ range->num_encoding_sizes = 2; /* Number of entry in the list */
+ range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */
+// range->encoding_login_index; /* token index for login token */
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ range->txpower_capa = IW_TXPOW_DBM;
+ range->num_txpower = IW_MAX_TXPOWER;
+ for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16); i < IW_MAX_TXPOWER;
+ i++, level -= ((IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM) * 16) /
+ (IW_MAX_TXPOWER - 1))
+ range->txpower[i] = level / 16;
+ } else {
+ range->txpower_capa = 0;
+ range->num_txpower = 0;
+ }
+
+
+ /* Set the Wireless Extension versions */
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 16;
+
+// range->retry_capa; /* What retry options are supported */
+// range->retry_flags; /* How to decode max/min retry limit */
+// range->r_time_flags; /* How to decode max/min retry life */
+// range->min_retry; /* Minimal number of retries */
+// range->max_retry; /* Maximal number of retries */
+// range->min_r_time; /* Minimal retry lifetime */
+// range->max_r_time; /* Maximal retry lifetime */
+
+ range->num_channels = FREQ_COUNT;
+
+ val = 0;
+ for (i = 0; i < FREQ_COUNT; i++) {
+ // TODO: Include only legal frequencies for some countries
+// if (local->channel_mask & (1 << i)) {
+ range->freq[val].i = i + 1;
+ range->freq[val].m = ipw2100_frequencies[i] * 100000;
+ range->freq[val].e = 1;
+ val++;
+// }
+ if (val == IW_MAX_FREQUENCIES)
+ break;
+ }
+ range->num_frequency = val;
+
+ IPW_DEBUG_WX("GET Range\n");
+
+ return 0;
+}
+
+static int ipw2100_wx_set_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ static const unsigned char any[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+ };
+ static const unsigned char off[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+
+ // sanity checks
+ if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
+ !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
+ /* we disable mandatory BSSID association */
+ IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
+ priv->config &= ~CFG_STATIC_BSSID;
+ err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
+ goto done;
+ }
+
+ priv->config |= CFG_STATIC_BSSID;
+ memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
+
+ err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
+
+ IPW_DEBUG_WX("SET BSSID -> %02X:%02X:%02X:%02X:%02X:%02X\n",
+ wrqu->ap_addr.sa_data[0] & 0xff,
+ wrqu->ap_addr.sa_data[1] & 0xff,
+ wrqu->ap_addr.sa_data[2] & 0xff,
+ wrqu->ap_addr.sa_data[3] & 0xff,
+ wrqu->ap_addr.sa_data[4] & 0xff,
+ wrqu->ap_addr.sa_data[5] & 0xff);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ /* If we are associated, trying to associate, or have a statically
+ * configured BSSID then return that; otherwise return ANY */
+ if (priv->config & CFG_STATIC_BSSID ||
+ priv->status & STATUS_ASSOCIATED) {
+ wrqu->ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(wrqu->ap_addr.sa_data, &priv->bssid, ETH_ALEN);
+ } else
+ memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
+
+ IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n",
+ MAC_ARG(wrqu->ap_addr.sa_data));
+ return 0;
+}
+
+static int ipw2100_wx_set_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ char *essid = ""; /* ANY */
+ int length = 0;
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (wrqu->essid.flags && wrqu->essid.length) {
+ length = wrqu->essid.length - 1;
+ essid = extra;
+ }
+
+ if (length == 0) {
+ IPW_DEBUG_WX("Setting ESSID to ANY\n");
+ priv->config &= ~CFG_STATIC_ESSID;
+ err = ipw2100_set_essid(priv, NULL, 0, 0);
+ goto done;
+ }
+
+ length = min(length, IW_ESSID_MAX_SIZE);
+
+ priv->config |= CFG_STATIC_ESSID;
+
+ if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
+ IPW_DEBUG_WX("ESSID set to current ESSID.\n");
+ err = 0;
+ goto done;
+ }
+
+ IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length),
+ length);
+
+ priv->essid_len = length;
+ memcpy(priv->essid, essid, priv->essid_len);
+
+ err = ipw2100_set_essid(priv, essid, length, 0);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ /* If we are associated, trying to associate, or have a statically
+ * configured ESSID then return that; otherwise return ANY */
+ if (priv->config & CFG_STATIC_ESSID ||
+ priv->status & STATUS_ASSOCIATED) {
+ IPW_DEBUG_WX("Getting essid: '%s'\n",
+ escape_essid(priv->essid, priv->essid_len));
+ memcpy(extra, priv->essid, priv->essid_len);
+ wrqu->essid.length = priv->essid_len;
+ wrqu->essid.flags = 1; /* active */
+ } else {
+ IPW_DEBUG_WX("Getting essid: ANY\n");
+ wrqu->essid.length = 0;
+ wrqu->essid.flags = 0; /* active */
+ }
+
+ return 0;
+}
+
+static int ipw2100_wx_set_nick(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (wrqu->data.length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ wrqu->data.length = min((size_t)wrqu->data.length, sizeof(priv->nick));
+ memset(priv->nick, 0, sizeof(priv->nick));
+ memcpy(priv->nick, extra, wrqu->data.length);
+
+ IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick);
+
+ return 0;
+}
+
+static int ipw2100_wx_get_nick(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->data.length = strlen(priv->nick) + 1;
+ memcpy(extra, priv->nick, wrqu->data.length);
+ wrqu->data.flags = 1; /* active */
+
+ IPW_DEBUG_WX("GET Nickname -> %s \n", extra);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ u32 target_rate = wrqu->bitrate.value;
+ u32 rate;
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ rate = 0;
+
+ if (target_rate == 1000000 ||
+ (!wrqu->bitrate.fixed && target_rate > 1000000))
+ rate |= TX_RATE_1_MBIT;
+ if (target_rate == 2000000 ||
+ (!wrqu->bitrate.fixed && target_rate > 2000000))
+ rate |= TX_RATE_2_MBIT;
+ if (target_rate == 5500000 ||
+ (!wrqu->bitrate.fixed && target_rate > 5500000))
+ rate |= TX_RATE_5_5_MBIT;
+ if (target_rate == 11000000 ||
+ (!wrqu->bitrate.fixed && target_rate > 11000000))
+ rate |= TX_RATE_11_MBIT;
+ if (rate == 0)
+ rate = DEFAULT_TX_RATES;
+
+ err = ipw2100_set_tx_rates(priv, rate, 0);
+
+ IPW_DEBUG_WX("SET Rate -> %04X \n", rate);
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+
+static int ipw2100_wx_get_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int val;
+ int len = sizeof(val);
+ int err = 0;
+
+ if (!(priv->status & STATUS_ENABLED) ||
+ priv->status & STATUS_RF_KILL_MASK ||
+ !(priv->status & STATUS_ASSOCIATED)) {
+ wrqu->bitrate.value = 0;
+ return 0;
+ }
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
+ if (err) {
+ IPW_DEBUG_WX("failed querying ordinals.\n");
+ return err;
+ }
+
+ switch (val & TX_RATE_MASK) {
+ case TX_RATE_1_MBIT:
+ wrqu->bitrate.value = 1000000;
+ break;
+ case TX_RATE_2_MBIT:
+ wrqu->bitrate.value = 2000000;
+ break;
+ case TX_RATE_5_5_MBIT:
+ wrqu->bitrate.value = 5500000;
+ break;
+ case TX_RATE_11_MBIT:
+ wrqu->bitrate.value = 11000000;
+ break;
+ default:
+ wrqu->bitrate.value = 0;
+ }
+
+ IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_set_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int value, err;
+
+ /* Auto RTS not yet supported */
+ if (wrqu->rts.fixed == 0)
+ return -EINVAL;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (wrqu->rts.disabled)
+ value = priv->rts_threshold | RTS_DISABLED;
+ else {
+ if (wrqu->rts.value < 1 ||
+ wrqu->rts.value > 2304) {
+ err = -EINVAL;
+ goto done;
+ }
+ value = wrqu->rts.value;
+ }
+
+ err = ipw2100_set_rts_threshold(priv, value);
+
+ IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value);
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
+ wrqu->rts.fixed = 1; /* no auto select */
+
+ /* If RTS is set to the default value, then it is disabled */
+ wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
+
+ IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_txpow(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0, value;
+
+ if (priv->ieee->iw_mode != IW_MODE_ADHOC)
+ return -EINVAL;
+
+ if (wrqu->txpower.disabled == 1 || wrqu->txpower.fixed == 0)
+ value = IPW_TX_POWER_DEFAULT;
+ else {
+ if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
+ wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
+ return -EINVAL;
+
+ value = (wrqu->txpower.value - IPW_TX_POWER_MIN_DBM) * 16 /
+ (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
+ }
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ err = ipw2100_set_tx_power(priv, value);
+
+ IPW_DEBUG_WX("SET TX Power -> %d \n", value);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_txpow(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (priv->ieee->iw_mode != IW_MODE_ADHOC) {
+ wrqu->power.disabled = 1;
+ return 0;
+ }
+
+ if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
+ wrqu->power.fixed = 0;
+ wrqu->power.value = IPW_TX_POWER_MAX_DBM;
+ wrqu->power.disabled = 1;
+ } else {
+ wrqu->power.disabled = 0;
+ wrqu->power.fixed = 1;
+ wrqu->power.value =
+ (priv->tx_power *
+ (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM)) /
+ (IPW_TX_POWER_MAX - IPW_TX_POWER_MIN) +
+ IPW_TX_POWER_MIN_DBM;
+ }
+
+ wrqu->power.flags = IW_TXPOW_DBM;
+
+ IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->power.value);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (!wrqu->frag.fixed)
+ return -EINVAL;
+
+ if (wrqu->frag.disabled) {
+ priv->frag_threshold |= FRAG_DISABLED;
+ priv->ieee->fts = DEFAULT_FTS;
+ } else {
+ if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
+ wrqu->frag.value > MAX_FRAG_THRESHOLD)
+ return -EINVAL;
+
+ priv->ieee->fts = wrqu->frag.value & ~0x1;
+ priv->frag_threshold = priv->ieee->fts;
+ }
+
+ IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts);
+
+ return 0;
+}
+
+static int ipw2100_wx_get_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
+ wrqu->frag.fixed = 0; /* no auto select */
+ wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
+
+ IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
+ wrqu->retry.disabled)
+ return -EINVAL;
+
+ if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
+ return 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (wrqu->retry.flags & IW_RETRY_MIN) {
+ err = ipw2100_set_short_retry(priv, wrqu->retry.value);
+ IPW_DEBUG_WX("SET Short Retry Limit -> %d \n",
+ wrqu->retry.value);
+ goto done;
+ }
+
+ if (wrqu->retry.flags & IW_RETRY_MAX) {
+ err = ipw2100_set_long_retry(priv, wrqu->retry.value);
+ IPW_DEBUG_WX("SET Long Retry Limit -> %d \n",
+ wrqu->retry.value);
+ goto done;
+ }
+
+ err = ipw2100_set_short_retry(priv, wrqu->retry.value);
+ if (!err)
+ err = ipw2100_set_long_retry(priv, wrqu->retry.value);
+
+ IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ wrqu->retry.disabled = 0; /* can't be disabled */
+
+ if ((wrqu->retry.flags & IW_RETRY_TYPE) ==
+ IW_RETRY_LIFETIME)
+ return -EINVAL;
+
+ if (wrqu->retry.flags & IW_RETRY_MAX) {
+ wrqu->retry.flags = IW_RETRY_LIMIT & IW_RETRY_MAX;
+ wrqu->retry.value = priv->long_retry_limit;
+ } else {
+ wrqu->retry.flags =
+ (priv->short_retry_limit !=
+ priv->long_retry_limit) ?
+ IW_RETRY_LIMIT & IW_RETRY_MIN : IW_RETRY_LIMIT;
+
+ wrqu->retry.value = priv->short_retry_limit;
+ }
+
+ IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value);
+
+ return 0;
+}
+
+static int ipw2100_wx_set_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ IPW_DEBUG_WX("Initiating scan...\n");
+ if (ipw2100_set_scan_options(priv) ||
+ ipw2100_start_scan(priv)) {
+ IPW_DEBUG_WX("Start scan failed.\n");
+
+ /* TODO: Mark a scan as pending so when hardware initialized
+ * a scan starts */
+ }
+
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
+}
+
+
+/*
+ * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
+ */
+static int ipw2100_wx_set_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key)
+{
+ /*
+ * No check of STATUS_INITIALIZED required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
+}
+
+static int ipw2100_wx_get_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
+}
+
+static int ipw2100_wx_set_power(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (wrqu->power.disabled) {
+ priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
+ err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
+ IPW_DEBUG_WX("SET Power Management Mode -> off\n");
+ goto done;
+ }
+
+ switch (wrqu->power.flags & IW_POWER_MODE) {
+ case IW_POWER_ON: /* If not specified */
+ case IW_POWER_MODE: /* If set all mask */
+ case IW_POWER_ALL_R: /* If explicitely state all */
+ break;
+ default: /* Otherwise we don't support it */
+ IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
+ wrqu->power.flags);
+ err = -EOPNOTSUPP;
+ goto done;
+ }
+
+ /* If the user hasn't specified a power management mode yet, default
+ * to BATTERY */
+ priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
+ err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
+
+ IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n",
+ priv->power_mode);
+
+ done:
+ up(&priv->action_sem);
+ return err;
+
+}
+
+static int ipw2100_wx_get_power(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (!(priv->power_mode & IPW_POWER_ENABLED)) {
+ wrqu->power.disabled = 1;
+ } else {
+ wrqu->power.disabled = 0;
+ wrqu->power.flags = 0;
+ }
+
+ IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
+
+ return 0;
+}
+
+
+/*
+ *
+ * IWPRIV handlers
+ *
+ */
+#ifdef CONFIG_IPW2100_MONITOR
+static int ipw2100_wx_set_promisc(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int *parms = (int *)extra;
+ int enable = (parms[0] > 0);
+ int err = 0;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (enable) {
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+ err = ipw2100_set_channel(priv, parms[1], 0);
+ goto done;
+ }
+ priv->channel = parms[1];
+ err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
+ } else {
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+ err = ipw2100_switch_mode(priv, priv->last_mode);
+ }
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_reset(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ if (priv->status & STATUS_INITIALIZED)
+ schedule_reset(priv);
+ return 0;
+}
+
+#endif
+
+static int ipw2100_wx_set_powermode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err = 0, mode = *(int *)extra;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if ((mode < 1) || (mode > POWER_MODES))
+ mode = IPW_POWER_AUTO;
+
+ if (priv->power_mode != mode)
+ err = ipw2100_set_power_mode(priv, mode);
+ done:
+ up(&priv->action_sem);
+ return err;
+}
+
+#define MAX_POWER_STRING 80
+static int ipw2100_wx_get_powermode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int level = IPW_POWER_LEVEL(priv->power_mode);
+ s32 timeout, period;
+
+ if (!(priv->power_mode & IPW_POWER_ENABLED)) {
+ snprintf(extra, MAX_POWER_STRING,
+ "Power save level: %d (Off)", level);
+ } else {
+ switch (level) {
+ case IPW_POWER_MODE_CAM:
+ snprintf(extra, MAX_POWER_STRING,
+ "Power save level: %d (None)", level);
+ break;
+ case IPW_POWER_AUTO:
+ snprintf(extra, MAX_POWER_STRING,
+ "Power save level: %d (Auto)", 0);
+ break;
+ default:
+ timeout = timeout_duration[level - 1] / 1000;
+ period = period_duration[level - 1] / 1000;
+ snprintf(extra, MAX_POWER_STRING,
+ "Power save level: %d "
+ "(Timeout %dms, Period %dms)",
+ level, timeout, period);
+ }
+ }
+
+ wrqu->data.length = strlen(extra) + 1;
+
+ return 0;
+}
+
+
+static int ipw2100_wx_set_preamble(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ int err, mode = *(int *)extra;
+
+ down(&priv->action_sem);
+ if (!(priv->status & STATUS_INITIALIZED)) {
+ err = -EIO;
+ goto done;
+ }
+
+ if (mode == 1)
+ priv->config |= CFG_LONG_PREAMBLE;
+ else if (mode == 0)
+ priv->config &= ~CFG_LONG_PREAMBLE;
+ else {
+ err = -EINVAL;
+ goto done;
+ }
+
+ err = ipw2100_system_config(priv, 0);
+
+done:
+ up(&priv->action_sem);
+ return err;
+}
+
+static int ipw2100_wx_get_preamble(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * This can be called at any time. No action lock required
+ */
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+ if (priv->config & CFG_LONG_PREAMBLE)
+ snprintf(wrqu->name, IFNAMSIZ, "long (1)");
+ else
+ snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
+
+ return 0;
+}
+
+static iw_handler ipw2100_wx_handlers[] =
+{
+ NULL, /* SIOCSIWCOMMIT */
+ ipw2100_wx_get_name, /* SIOCGIWNAME */
+ NULL, /* SIOCSIWNWID */
+ NULL, /* SIOCGIWNWID */
+ ipw2100_wx_set_freq, /* SIOCSIWFREQ */
+ ipw2100_wx_get_freq, /* SIOCGIWFREQ */
+ ipw2100_wx_set_mode, /* SIOCSIWMODE */
+ ipw2100_wx_get_mode, /* SIOCGIWMODE */
+ NULL, /* SIOCSIWSENS */
+ NULL, /* SIOCGIWSENS */
+ NULL, /* SIOCSIWRANGE */
+ ipw2100_wx_get_range, /* SIOCGIWRANGE */
+ NULL, /* SIOCSIWPRIV */
+ NULL, /* SIOCGIWPRIV */
+ NULL, /* SIOCSIWSTATS */
+ NULL, /* SIOCGIWSTATS */
+ NULL, /* SIOCSIWSPY */
+ NULL, /* SIOCGIWSPY */
+ NULL, /* SIOCGIWTHRSPY */
+ NULL, /* SIOCWIWTHRSPY */
+ ipw2100_wx_set_wap, /* SIOCSIWAP */
+ ipw2100_wx_get_wap, /* SIOCGIWAP */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCGIWAPLIST -- depricated */
+ ipw2100_wx_set_scan, /* SIOCSIWSCAN */
+ ipw2100_wx_get_scan, /* SIOCGIWSCAN */
+ ipw2100_wx_set_essid, /* SIOCSIWESSID */
+ ipw2100_wx_get_essid, /* SIOCGIWESSID */
+ ipw2100_wx_set_nick, /* SIOCSIWNICKN */
+ ipw2100_wx_get_nick, /* SIOCGIWNICKN */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ ipw2100_wx_set_rate, /* SIOCSIWRATE */
+ ipw2100_wx_get_rate, /* SIOCGIWRATE */
+ ipw2100_wx_set_rts, /* SIOCSIWRTS */
+ ipw2100_wx_get_rts, /* SIOCGIWRTS */
+ ipw2100_wx_set_frag, /* SIOCSIWFRAG */
+ ipw2100_wx_get_frag, /* SIOCGIWFRAG */
+ ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */
+ ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */
+ ipw2100_wx_set_retry, /* SIOCSIWRETRY */
+ ipw2100_wx_get_retry, /* SIOCGIWRETRY */
+ ipw2100_wx_set_encode, /* SIOCSIWENCODE */
+ ipw2100_wx_get_encode, /* SIOCGIWENCODE */
+ ipw2100_wx_set_power, /* SIOCSIWPOWER */
+ ipw2100_wx_get_power, /* SIOCGIWPOWER */
+};
+
+#define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
+#define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
+#define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
+#define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
+#define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
+#define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
+
+static const struct iw_priv_args ipw2100_private_args[] = {
+
+#ifdef CONFIG_IPW2100_MONITOR
+ {
+ IPW2100_PRIV_SET_MONITOR,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"
+ },
+ {
+ IPW2100_PRIV_RESET,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"
+ },
+#endif /* CONFIG_IPW2100_MONITOR */
+
+ {
+ IPW2100_PRIV_SET_POWER,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"
+ },
+ {
+ IPW2100_PRIV_GET_POWER,
+ 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING, "get_power"
+ },
+ {
+ IPW2100_PRIV_SET_LONGPREAMBLE,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"
+ },
+ {
+ IPW2100_PRIV_GET_LONGPREAMBLE,
+ 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"
+ },
+};
+
+static iw_handler ipw2100_private_handler[] = {
+#ifdef CONFIG_IPW2100_MONITOR
+ ipw2100_wx_set_promisc,
+ ipw2100_wx_reset,
+#else /* CONFIG_IPW2100_MONITOR */
+ NULL,
+ NULL,
+#endif /* CONFIG_IPW2100_MONITOR */
+ ipw2100_wx_set_powermode,
+ ipw2100_wx_get_powermode,
+ ipw2100_wx_set_preamble,
+ ipw2100_wx_get_preamble,
+};
+
+struct iw_handler_def ipw2100_wx_handler_def =
+{
+ .standard = ipw2100_wx_handlers,
+ .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
+ .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
+ .num_private_args = sizeof(ipw2100_private_args) /
+ sizeof(struct iw_priv_args),
+ .private = (iw_handler *)ipw2100_private_handler,
+ .private_args = (struct iw_priv_args *)ipw2100_private_args,
+};
+
+/*
+ * Get wireless statistics.
+ * Called by /proc/net/wireless
+ * Also called by SIOCGIWSTATS
+ */
+struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev)
+{
+ enum {
+ POOR = 30,
+ FAIR = 60,
+ GOOD = 80,
+ VERY_GOOD = 90,
+ EXCELLENT = 95,
+ PERFECT = 100
+ };
+ int rssi_qual;
+ int tx_qual;
+ int beacon_qual;
+
+ struct ipw2100_priv *priv = ieee80211_priv(dev);
+ struct iw_statistics *wstats;
+ u32 rssi, quality, tx_retries, missed_beacons, tx_failures;
+ u32 ord_len = sizeof(u32);
+
+ if (!priv)
+ return (struct iw_statistics *) NULL;
+
+ wstats = &priv->wstats;
+
+ /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
+ * ipw2100_wx_wireless_stats seems to be called before fw is
+ * initialized. STATUS_ASSOCIATED will only be set if the hw is up
+ * and associated; if not associcated, the values are all meaningless
+ * anyway, so set them all to NULL and INVALID */
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ wstats->miss.beacon = 0;
+ wstats->discard.retries = 0;
+ wstats->qual.qual = 0;
+ wstats->qual.level = 0;
+ wstats->qual.noise = 0;
+ wstats->qual.updated = 7;
+ wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
+ IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
+ return wstats;
+ }
+
+ if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
+ &missed_beacons, &ord_len))
+ goto fail_get_ordinal;
+
+ /* If we don't have a connection the quality and level is 0*/
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ wstats->qual.qual = 0;
+ wstats->qual.level = 0;
+ } else {
+ if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
+ &rssi, &ord_len))
+ goto fail_get_ordinal;
+ wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
+ if (rssi < 10)
+ rssi_qual = rssi * POOR / 10;
+ else if (rssi < 15)
+ rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
+ else if (rssi < 20)
+ rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
+ else if (rssi < 30)
+ rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
+ 10 + GOOD;
+ else
+ rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
+ 10 + VERY_GOOD;
+
+ if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
+ &tx_retries, &ord_len))
+ goto fail_get_ordinal;
+
+ if (tx_retries > 75)
+ tx_qual = (90 - tx_retries) * POOR / 15;
+ else if (tx_retries > 70)
+ tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
+ else if (tx_retries > 65)
+ tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
+ else if (tx_retries > 50)
+ tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
+ 15 + GOOD;
+ else
+ tx_qual = (50 - tx_retries) *
+ (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
+
+ if (missed_beacons > 50)
+ beacon_qual = (60 - missed_beacons) * POOR / 10;
+ else if (missed_beacons > 40)
+ beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
+ 10 + POOR;
+ else if (missed_beacons > 32)
+ beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
+ 18 + FAIR;
+ else if (missed_beacons > 20)
+ beacon_qual = (32 - missed_beacons) *
+ (VERY_GOOD - GOOD) / 20 + GOOD;
+ else
+ beacon_qual = (20 - missed_beacons) *
+ (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
+
+ quality = min(beacon_qual, min(tx_qual, rssi_qual));
+
+#ifdef CONFIG_IPW_DEBUG
+ if (beacon_qual == quality)
+ IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
+ else if (tx_qual == quality)
+ IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
+ else if (quality != 100)
+ IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
+ else
+ IPW_DEBUG_WX("Quality not clamped.\n");
+#endif
+
+ wstats->qual.qual = quality;
+ wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
+ }
+
+ wstats->qual.noise = 0;
+ wstats->qual.updated = 7;
+ wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
+
+ /* FIXME: this is percent and not a # */
+ wstats->miss.beacon = missed_beacons;
+
+ if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
+ &tx_failures, &ord_len))
+ goto fail_get_ordinal;
+ wstats->discard.retries = tx_failures;
+
+ return wstats;
+
+ fail_get_ordinal:
+ IPW_DEBUG_WX("failed querying ordinals.\n");
+
+ return (struct iw_statistics *) NULL;
+}
+
+void ipw2100_wx_event_work(struct ipw2100_priv *priv)
+{
+ union iwreq_data wrqu;
+ int len = ETH_ALEN;
+
+ if (priv->status & STATUS_STOPPING)
+ return;
+
+ down(&priv->action_sem);
+
+ IPW_DEBUG_WX("enter\n");
+
+ up(&priv->action_sem);
+
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+
+ /* Fetch BSSID from the hardware */
+ if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
+ priv->status & STATUS_RF_KILL_MASK ||
+ ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
+ &priv->bssid, &len)) {
+ memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
+ } else {
+ /* We now have the BSSID, so can finish setting to the full
+ * associated state */
+ memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
+ memcpy(&priv->ieee->bssid, priv->bssid, ETH_ALEN);
+ priv->status &= ~STATUS_ASSOCIATING;
+ priv->status |= STATUS_ASSOCIATED;
+ netif_carrier_on(priv->net_dev);
+ if (netif_queue_stopped(priv->net_dev)) {
+ IPW_DEBUG_INFO("Waking net queue.\n");
+ netif_wake_queue(priv->net_dev);
+ } else {
+ IPW_DEBUG_INFO("Starting net queue.\n");
+ netif_start_queue(priv->net_dev);
+ }
+ }
+
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ IPW_DEBUG_WX("Configuring ESSID\n");
+ down(&priv->action_sem);
+ /* This is a disassociation event, so kick the firmware to
+ * look for another AP */
+ if (priv->config & CFG_STATIC_ESSID)
+ ipw2100_set_essid(priv, priv->essid, priv->essid_len, 0);
+ else
+ ipw2100_set_essid(priv, NULL, 0, 0);
+ up(&priv->action_sem);
+ }
+
+ wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+#define IPW2100_FW_MAJOR_VERSION 1
+#define IPW2100_FW_MINOR_VERSION 3
+
+#define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
+#define IPW2100_FW_MAJOR(x) (x & 0xff)
+
+#define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
+ IPW2100_FW_MAJOR_VERSION)
+
+#define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
+"." __stringify(IPW2100_FW_MINOR_VERSION)
+
+#define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
+
+
+/*
+
+BINARY FIRMWARE HEADER FORMAT
+
+offset length desc
+0 2 version
+2 2 mode == 0:BSS,1:IBSS,2:MONITOR
+4 4 fw_len
+8 4 uc_len
+C fw_len firmware data
+12 + fw_len uc_len microcode data
+
+*/
+
+struct ipw2100_fw_header {
+ short version;
+ short mode;
+ unsigned int fw_size;
+ unsigned int uc_size;
+} __attribute__ ((packed));
+
+
+
+static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
+{
+ struct ipw2100_fw_header *h =
+ (struct ipw2100_fw_header *)fw->fw_entry->data;
+
+ if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
+ IPW_DEBUG_WARNING("Firmware image not compatible "
+ "(detected version id of %u). "
+ "See Documentation/networking/README.ipw2100\n",
+ h->version);
+ return 1;
+ }
+
+ fw->version = h->version;
+ fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
+ fw->fw.size = h->fw_size;
+ fw->uc.data = fw->fw.data + h->fw_size;
+ fw->uc.size = h->uc_size;
+
+ return 0;
+}
+
+
+int ipw2100_get_firmware(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
+{
+ char *fw_name;
+ int rc;
+
+ IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
+ priv->net_dev->name);
+
+ switch (priv->ieee->iw_mode) {
+ case IW_MODE_ADHOC:
+ fw_name = IPW2100_FW_NAME("-i");
+ break;
+#ifdef CONFIG_IPW2100_MONITOR
+ case IW_MODE_MONITOR:
+ fw_name = IPW2100_FW_NAME("-p");
+ break;
+#endif
+ case IW_MODE_INFRA:
+ default:
+ fw_name = IPW2100_FW_NAME("");
+ break;
+ }
+
+ rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
+
+ if (rc < 0) {
+ IPW_DEBUG_ERROR(
+ "%s: Firmware '%s' not available or load failed.\n",
+ priv->net_dev->name, fw_name);
+ return rc;
+ }
+ IPW_DEBUG_INFO("firmware data %p size %d\n", fw->fw_entry->data,
+ fw->fw_entry->size);
+
+ ipw2100_mod_firmware_load(fw);
+
+ return 0;
+}
+
+void ipw2100_release_firmware(struct ipw2100_priv *priv,
+ struct ipw2100_fw *fw)
+{
+ fw->version = 0;
+ if (fw->fw_entry)
+ release_firmware(fw->fw_entry);
+ fw->fw_entry = NULL;
+}
+
+
+int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, size_t max)
+{
+ char ver[MAX_FW_VERSION_LEN];
+ u32 len = MAX_FW_VERSION_LEN;
+ u32 tmp;
+ int i;
+ /* firmware version is an ascii string (max len of 14) */
+ if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM,
+ ver, &len))
+ return -EIO;
+ tmp = max;
+ if (len >= max)
+ len = max - 1;
+ for (i = 0; i < len; i++)
+ buf[i] = ver[i];
+ buf[i] = '\0';
+ return tmp;
+}
+
+int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, size_t max)
+{
+ u32 ver;
+ u32 len = sizeof(ver);
+ /* microcode version is a 32 bit integer */
+ if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION,
+ &ver, &len))
+ return -EIO;
+ return snprintf(buf, max, "%08X", ver);
+}
+
+/*
+ * On exit, the firmware will have been freed from the fw list
+ */
+int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
+{
+ /* firmware is constructed of N contiguous entries, each entry is
+ * structured as:
+ *
+ * offset sie desc
+ * 0 4 address to write to
+ * 4 2 length of data run
+ * 6 length data
+ */
+ unsigned int addr;
+ unsigned short len;
+
+ const unsigned char *firmware_data = fw->fw.data;
+ unsigned int firmware_data_left = fw->fw.size;
+
+ while (firmware_data_left > 0) {
+ addr = *(u32 *)(firmware_data);
+ firmware_data += 4;
+ firmware_data_left -= 4;
+
+ len = *(u16 *)(firmware_data);
+ firmware_data += 2;
+ firmware_data_left -= 2;
+
+ if (len > 32) {
+ IPW_DEBUG_ERROR(
+ "Invalid firmware run-length of %d bytes\n",
+ len);
+ return -EINVAL;
+ }
+
+ write_nic_memory(priv->net_dev, addr, len, firmware_data);
+ firmware_data += len;
+ firmware_data_left -= len;
+ }
+
+ return 0;
+}
+
+struct symbol_alive_response {
+ u8 cmd_id;
+ u8 seq_num;
+ u8 ucode_rev;
+ u8 eeprom_valid;
+ u16 valid_flags;
+ u8 IEEE_addr[6];
+ u16 flags;
+ u16 pcb_rev;
+ u16 clock_settle_time; // 1us LSB
+ u16 powerup_settle_time; // 1us LSB
+ u16 hop_settle_time; // 1us LSB
+ u8 date[3]; // month, day, year
+ u8 time[2]; // hours, minutes
+ u8 ucode_valid;
+};
+
+int ipw2100_ucode_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
+{
+ struct net_device *dev = priv->net_dev;
+ const unsigned char *microcode_data = fw->uc.data;
+ unsigned int microcode_data_left = fw->uc.size;
+
+ struct symbol_alive_response response;
+ int i, j;
+ u8 data;
+
+ /* Symbol control */
+ write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
+ readl((void *)(dev->base_addr));
+ write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
+ readl((void *)(dev->base_addr));
+
+ /* HW config */
+ write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
+ readl((void *)(dev->base_addr));
+
+ /* EN_CS_ACCESS bit to reset control store pointer */
+ write_nic_byte(dev, 0x210000, 0x40);
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210000, 0x0);
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210000, 0x40);
+ readl((void *)(dev->base_addr));
+
+ /* copy microcode from buffer into Symbol */
+
+ while (microcode_data_left > 0) {
+ write_nic_byte(dev, 0x210010, *microcode_data++);
+ write_nic_byte(dev, 0x210010, *microcode_data++);
+ microcode_data_left -= 2;
+ }
+
+ /* EN_CS_ACCESS bit to reset the control store pointer */
+ write_nic_byte(dev, 0x210000, 0x0);
+ readl((void *)(dev->base_addr));
+
+ /* Enable System (Reg 0)
+ * first enable causes garbage in RX FIFO */
+ write_nic_byte(dev, 0x210000, 0x0);
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210000, 0x80);
+ readl((void *)(dev->base_addr));
+
+ /* Reset External Baseband Reg */
+ write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
+ readl((void *)(dev->base_addr));
+ write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
+ readl((void *)(dev->base_addr));
+
+ /* HW Config (Reg 5) */
+ write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
+ readl((void *)(dev->base_addr));
+
+ /* Enable System (Reg 0)
+ * second enable should be OK */
+ write_nic_byte(dev, 0x210000, 0x00); // clear enable system
+ readl((void *)(dev->base_addr));
+ write_nic_byte(dev, 0x210000, 0x80); // set enable system
+
+ /* check Symbol is enabled - upped this from 5 as it wasn't always
+ * catching the update */
+ for (i = 0; i < 10; i++) {
+ udelay(10);
+
+ /* check Dino is enabled bit */
+ read_nic_byte(dev, 0x210000, &data);
+ if (data & 0x1)
+ break;
+ }
+
+ if (i == 10) {
+ IPW_DEBUG_ERROR("%s: Error initializing Symbol\n",
+ dev->name);
+ return -EIO;
+ }
+
+ /* Get Symbol alive response */
+ for (i = 0; i < 30; i++) {
+ /* Read alive response structure */
+ for (j = 0;
+ j < (sizeof(struct symbol_alive_response) >> 1);
+ j++)
+ read_nic_word(dev, 0x210004,
+ ((u16 *)&response) + j);
+
+ if ((response.cmd_id == 1) &&
+ (response.ucode_valid == 0x1))
+ break;
+ udelay(10);
+ }
+
+ if (i == 30) {
+ IPW_DEBUG_ERROR("%s: No response from Symbol - hw not alive\n",
+ dev->name);
+ printk_buf(IPW_DL_ERROR, (u8*)&response, sizeof(response));
+ return -EIO;
+ }
+
+ return 0;
+}
--- /dev/null
+/******************************************************************************
+
+ Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+#ifndef _IPW2100_H
+#define _IPW2100_H
+
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <asm/io.h>
+#include <linux/socket.h>
+#include <linux/if_arp.h>
+#include <linux/wireless.h>
+#include <linux/version.h>
+#include <net/iw_handler.h> // new driver API
+
+#include <net/ieee80211.h>
+
+#include <linux/workqueue.h>
+
+#ifndef IRQ_NONE
+typedef void irqreturn_t;
+#define IRQ_NONE
+#define IRQ_HANDLED
+#define IRQ_RETVAL(x)
+#endif
+
+#if WIRELESS_EXT < 17
+#define IW_QUAL_QUAL_INVALID 0x10
+#define IW_QUAL_LEVEL_INVALID 0x20
+#define IW_QUAL_NOISE_INVALID 0x40
+#endif
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) )
+#define pci_dma_sync_single_for_cpu pci_dma_sync_single
+#define pci_dma_sync_single_for_device pci_dma_sync_single
+#endif
+
+#ifndef HAVE_FREE_NETDEV
+#define free_netdev(x) kfree(x)
+#endif
+
+
+
+struct ipw2100_priv;
+struct ipw2100_tx_packet;
+struct ipw2100_rx_packet;
+
+#ifdef CONFIG_IPW_DEBUG
+enum { IPW_DEBUG_ENABLED = 1 };
+extern u32 ipw2100_debug_level;
+#define IPW_DEBUG(level, message...) \
+do { \
+ if (ipw2100_debug_level & (level)) { \
+ printk(KERN_DEBUG "ipw2100: %c %s ", \
+ in_interrupt() ? 'I' : 'U', __FUNCTION__); \
+ printk(message); \
+ } \
+} while (0)
+#else
+enum { IPW_DEBUG_ENABLED = 0 };
+#define IPW_DEBUG(level, message...) do {} while (0)
+#endif /* CONFIG_IPW_DEBUG */
+
+#define IPW_DL_UNINIT 0x80000000
+#define IPW_DL_NONE 0x00000000
+#define IPW_DL_ALL 0x7FFFFFFF
+
+/*
+ * To use the debug system;
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define IPW_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry. xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a IPW2100_xxxx_DEBUG() macro definition for your
+ * classification, or use IPW_DEBUG(IPW_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ipw2100/debug_level
+ *
+ * you simply need to add your entry to the ipw2100_debug_levels array.
+ *
+ * If you do not see debug_level in /proc/net/ipw2100 then you do not have
+ * CONFIG_IPW_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define IPW_DL_ERROR (1<<0)
+#define IPW_DL_WARNING (1<<1)
+#define IPW_DL_INFO (1<<2)
+#define IPW_DL_WX (1<<3)
+#define IPW_DL_HC (1<<5)
+#define IPW_DL_STATE (1<<6)
+
+#define IPW_DL_NOTIF (1<<10)
+#define IPW_DL_SCAN (1<<11)
+#define IPW_DL_ASSOC (1<<12)
+#define IPW_DL_DROP (1<<13)
+
+#define IPW_DL_IOCTL (1<<14)
+#define IPW_DL_RF_KILL (1<<17)
+
+
+#define IPW_DL_MANAGE (1<<15)
+#define IPW_DL_FW (1<<16)
+
+#define IPW_DL_FRAG (1<<21)
+#define IPW_DL_WEP (1<<22)
+#define IPW_DL_TX (1<<23)
+#define IPW_DL_RX (1<<24)
+#define IPW_DL_ISR (1<<25)
+#define IPW_DL_IO (1<<26)
+#define IPW_DL_TRACE (1<<28)
+
+#define IPW_DEBUG_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a)
+#define IPW_DEBUG_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a)
+#define IPW_DEBUG_INFO(f...) IPW_DEBUG(IPW_DL_INFO, ## f)
+#define IPW_DEBUG_WX(f...) IPW_DEBUG(IPW_DL_WX, ## f)
+#define IPW_DEBUG_SCAN(f...) IPW_DEBUG(IPW_DL_SCAN, ## f)
+#define IPW_DEBUG_NOTIF(f...) IPW_DEBUG(IPW_DL_NOTIF, ## f)
+#define IPW_DEBUG_TRACE(f...) IPW_DEBUG(IPW_DL_TRACE, ## f)
+#define IPW_DEBUG_RX(f...) IPW_DEBUG(IPW_DL_RX, ## f)
+#define IPW_DEBUG_TX(f...) IPW_DEBUG(IPW_DL_TX, ## f)
+#define IPW_DEBUG_ISR(f...) IPW_DEBUG(IPW_DL_ISR, ## f)
+#define IPW_DEBUG_MANAGEMENT(f...) IPW_DEBUG(IPW_DL_MANAGE, ## f)
+#define IPW_DEBUG_WEP(f...) IPW_DEBUG(IPW_DL_WEP, ## f)
+#define IPW_DEBUG_HC(f...) IPW_DEBUG(IPW_DL_HC, ## f)
+#define IPW_DEBUG_FRAG(f...) IPW_DEBUG(IPW_DL_FRAG, ## f)
+#define IPW_DEBUG_FW(f...) IPW_DEBUG(IPW_DL_FW, ## f)
+#define IPW_DEBUG_RF_KILL(f...) IPW_DEBUG(IPW_DL_RF_KILL, ## f)
+#define IPW_DEBUG_DROP(f...) IPW_DEBUG(IPW_DL_DROP, ## f)
+#define IPW_DEBUG_IO(f...) IPW_DEBUG(IPW_DL_IO, ## f)
+#define IPW_DEBUG_IOCTL(f...) IPW_DEBUG(IPW_DL_IOCTL, ## f)
+#define IPW_DEBUG_STATE(f, a...) IPW_DEBUG(IPW_DL_STATE | IPW_DL_ASSOC | IPW_DL_INFO, f, ## a)
+#define IPW_DEBUG_ASSOC(f, a...) IPW_DEBUG(IPW_DL_ASSOC | IPW_DL_INFO, f, ## a)
+
+
+#define VERIFY(f) \
+{ \
+ int status = 0; \
+ status = f; \
+ if(status) \
+ return status; \
+}
+
+enum {
+ IPW_HW_STATE_DISABLED = 1,
+ IPW_HW_STATE_ENABLED = 0
+};
+
+struct ssid_context {
+ char ssid[IW_ESSID_MAX_SIZE + 1];
+ int ssid_len;
+ unsigned char bssid[ETH_ALEN];
+ int port_type;
+ int channel;
+
+};
+
+extern const char *port_type_str[];
+extern const char *band_str[];
+
+#define NUMBER_OF_BD_PER_COMMAND_PACKET 1
+#define NUMBER_OF_BD_PER_DATA_PACKET 2
+
+#define IPW_MAX_BDS 6
+#define NUMBER_OF_OVERHEAD_BDS_PER_PACKETR 2
+#define NUMBER_OF_BDS_TO_LEAVE_FOR_COMMANDS 1
+
+#define REQUIRED_SPACE_IN_RING_FOR_COMMAND_PACKET \
+ (IPW_BD_QUEUE_W_R_MIN_SPARE + NUMBER_OF_BD_PER_COMMAND_PACKET)
+
+struct bd_status {
+ union {
+ struct { u8 nlf:1, txType:2, intEnabled:1, reserved:4;} fields;
+ u8 field;
+ } info;
+} __attribute__ ((packed));
+
+#define IPW_BUFDESC_LAST_FRAG 0
+
+struct ipw2100_bd {
+ u32 host_addr;
+ u32 buf_length;
+ struct bd_status status;
+ /* number of fragments for frame (should be set only for
+ * 1st TBD) */
+ u8 num_fragments;
+ u8 reserved[6];
+} __attribute__ ((packed));
+
+#define IPW_BD_QUEUE_LENGTH(n) (1<<n)
+#define IPW_BD_ALIGNMENT(L) (L*sizeof(struct ipw2100_bd))
+
+#define IPW_BD_STATUS_TX_FRAME_802_3 0x00
+#define IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT 0x01
+#define IPW_BD_STATUS_TX_FRAME_COMMAND 0x02
+#define IPW_BD_STATUS_TX_FRAME_802_11 0x04
+#define IPW_BD_STATUS_TX_INTERRUPT_ENABLE 0x08
+
+struct ipw2100_bd_queue {
+ /* driver (virtual) pointer to queue */
+ struct ipw2100_bd *drv;
+
+ /* firmware (physical) pointer to queue */
+ dma_addr_t nic;
+
+ /* Length of phy memory allocated for BDs */
+ u32 size;
+
+ /* Number of BDs in queue (and in array) */
+ u32 entries;
+
+ /* Number of available BDs (invalid for NIC BDs) */
+ u32 available;
+
+ /* Offset of oldest used BD in array (next one to
+ * check for completion) */
+ u32 oldest;
+
+ /* Offset of next available (unused) BD */
+ u32 next;
+};
+
+#define RX_QUEUE_LENGTH 256
+#define TX_QUEUE_LENGTH 256
+#define HW_QUEUE_LENGTH 256
+
+#define TX_PENDED_QUEUE_LENGTH (TX_QUEUE_LENGTH / NUMBER_OF_BD_PER_DATA_PACKET)
+
+#define STATUS_TYPE_MASK 0x0000000f
+#define COMMAND_STATUS_VAL 0
+#define STATUS_CHANGE_VAL 1
+#define P80211_DATA_VAL 2
+#define P8023_DATA_VAL 3
+#define HOST_NOTIFICATION_VAL 4
+
+#define IPW2100_RSSI_TO_DBM (-98)
+
+struct ipw2100_status {
+ u32 frame_size;
+ u16 status_fields;
+ u8 flags;
+#define IPW_STATUS_FLAG_DECRYPTED (1<<0)
+#define IPW_STATUS_FLAG_WEP_ENCRYPTED (1<<1)
+#define IPW_STATUS_FLAG_CRC_ERROR (1<<2)
+ u8 rssi;
+} __attribute__ ((packed));
+
+struct ipw2100_status_queue {
+ /* driver (virtual) pointer to queue */
+ struct ipw2100_status *drv;
+
+ /* firmware (physical) pointer to queue */
+ dma_addr_t nic;
+
+ /* Length of phy memory allocated for BDs */
+ u32 size;
+};
+
+#define HOST_COMMAND_PARAMS_REG_LEN 100
+#define CMD_STATUS_PARAMS_REG_LEN 3
+
+#define IPW_WPA_CAPABILITIES 0x1
+#define IPW_WPA_LISTENINTERVAL 0x2
+#define IPW_WPA_AP_ADDRESS 0x4
+
+#define IPW_MAX_VAR_IE_LEN ((HOST_COMMAND_PARAMS_REG_LEN - 4) * sizeof(u32))
+
+struct ipw2100_wpa_assoc_frame {
+ u16 fixed_ie_mask;
+ struct {
+ u16 capab_info;
+ u16 listen_interval;
+ u8 current_ap[ETH_ALEN];
+ } fixed_ies;
+ u32 var_ie_len;
+ u8 var_ie[IPW_MAX_VAR_IE_LEN];
+};
+
+#define IPW_BSS 1
+#define IPW_MONITOR 2
+#define IPW_IBSS 3
+
+/**
+ * @struct _tx_cmd - HWCommand
+ * @brief H/W command structure.
+ */
+struct ipw2100_cmd_header {
+ u32 host_command_reg;
+ u32 host_command_reg1;
+ u32 sequence;
+ u32 host_command_len_reg;
+ u32 host_command_params_reg[HOST_COMMAND_PARAMS_REG_LEN];
+ u32 cmd_status_reg;
+ u32 cmd_status_params_reg[CMD_STATUS_PARAMS_REG_LEN];
+ u32 rxq_base_ptr;
+ u32 rxq_next_ptr;
+ u32 rxq_host_ptr;
+ u32 txq_base_ptr;
+ u32 txq_next_ptr;
+ u32 txq_host_ptr;
+ u32 tx_status_reg;
+ u32 reserved;
+ u32 status_change_reg;
+ u32 reserved1[3];
+ u32 *ordinal1_ptr;
+ u32 *ordinal2_ptr;
+} __attribute__ ((packed));
+
+struct ipw2100_data_header {
+ u32 host_command_reg;
+ u32 host_command_reg1;
+ u8 encrypted; // BOOLEAN in win! TRUE if frame is enc by driver
+ u8 needs_encryption; // BOOLEAN in win! TRUE if frma need to be enc in NIC
+ u8 wep_index; // 0 no key, 1-4 key index, 0xff immediate key
+ u8 key_size; // 0 no imm key, 0x5 64bit encr, 0xd 128bit encr, 0x10 128bit encr and 128bit IV
+ u8 key[16];
+ u8 reserved[10]; // f/w reserved
+ u8 src_addr[ETH_ALEN];
+ u8 dst_addr[ETH_ALEN];
+ u16 fragment_size;
+} __attribute__ ((packed));
+
+// Host command data structure
+struct host_command {
+ u32 host_command; // COMMAND ID
+ u32 host_command1; // COMMAND ID
+ u32 host_command_sequence; // UNIQUE COMMAND NUMBER (ID)
+ u32 host_command_length; // LENGTH
+ u32 host_command_parameters[HOST_COMMAND_PARAMS_REG_LEN]; // COMMAND PARAMETERS
+} __attribute__ ((packed));
+
+
+typedef enum {
+ POWER_ON_RESET,
+ EXIT_POWER_DOWN_RESET,
+ SW_RESET,
+ EEPROM_RW,
+ SW_RE_INIT
+} ipw2100_reset_event;
+
+enum {
+ COMMAND = 0xCAFE,
+ DATA,
+ RX
+};
+
+
+struct ipw2100_tx_packet {
+ int type;
+ int index;
+ union {
+ struct { /* COMMAND */
+ struct ipw2100_cmd_header* cmd;
+ dma_addr_t cmd_phys;
+ } c_struct;
+ struct { /* DATA */
+ struct ipw2100_data_header* data;
+ dma_addr_t data_phys;
+ struct ieee80211_txb *txb;
+ } d_struct;
+ } info;
+ int jiffy_start;
+
+ struct list_head list;
+};
+
+
+struct ipw2100_rx_packet {
+ struct ipw2100_rx *rxp;
+ dma_addr_t dma_addr;
+ int jiffy_start;
+ struct sk_buff *skb;
+ struct list_head list;
+};
+
+#define FRAG_DISABLED (1<<31)
+#define RTS_DISABLED (1<<31)
+#define MAX_RTS_THRESHOLD 2304U
+#define MIN_RTS_THRESHOLD 1U
+#define DEFAULT_RTS_THRESHOLD 1000U
+
+#define DEFAULT_BEACON_INTERVAL 100U
+#define DEFAULT_SHORT_RETRY_LIMIT 7U
+#define DEFAULT_LONG_RETRY_LIMIT 4U
+
+struct ipw2100_ordinals {
+ u32 table1_addr;
+ u32 table2_addr;
+ u32 table1_size;
+ u32 table2_size;
+};
+
+/* Host Notification header */
+struct ipw2100_notification {
+ u32 hnhdr_subtype; /* type of host notification */
+ u32 hnhdr_size; /* size in bytes of data
+ or number of entries, if table.
+ Does NOT include header */
+} __attribute__ ((packed));
+
+#define MAX_KEY_SIZE 16
+#define MAX_KEYS 8
+
+#define IPW2100_WEP_ENABLE (1<<1)
+#define IPW2100_WEP_DROP_CLEAR (1<<2)
+
+#define IPW_NONE_CIPHER (1<<0)
+#define IPW_WEP40_CIPHER (1<<1)
+#define IPW_TKIP_CIPHER (1<<2)
+#define IPW_CCMP_CIPHER (1<<4)
+#define IPW_WEP104_CIPHER (1<<5)
+#define IPW_CKIP_CIPHER (1<<6)
+
+#define IPW_AUTH_OPEN 0
+#define IPW_AUTH_SHARED 1
+
+struct statistic {
+ int value;
+ int hi;
+ int lo;
+};
+
+#define INIT_STAT(x) do { \
+ (x)->value = (x)->hi = 0; \
+ (x)->lo = 0x7fffffff; \
+} while (0)
+#define SET_STAT(x,y) do { \
+ (x)->value = y; \
+ if ((x)->value > (x)->hi) (x)->hi = (x)->value; \
+ if ((x)->value < (x)->lo) (x)->lo = (x)->value; \
+} while (0)
+#define INC_STAT(x) do { if (++(x)->value > (x)->hi) (x)->hi = (x)->value; } \
+while (0)
+#define DEC_STAT(x) do { if (--(x)->value < (x)->lo) (x)->lo = (x)->value; } \
+while (0)
+
+#define IPW2100_ERROR_QUEUE 5
+
+/* Power management code: enable or disable? */
+enum {
+#ifdef CONFIG_PM
+ IPW2100_PM_DISABLED = 0,
+ PM_STATE_SIZE = 16,
+#else
+ IPW2100_PM_DISABLED = 1,
+ PM_STATE_SIZE = 0,
+#endif
+};
+
+#define STATUS_POWERED (1<<0)
+#define STATUS_CMD_ACTIVE (1<<1) /**< host command in progress */
+#define STATUS_RUNNING (1<<2) /* Card initialized, but not enabled */
+#define STATUS_ENABLED (1<<3) /* Card enabled -- can scan,Tx,Rx */
+#define STATUS_STOPPING (1<<4) /* Card is in shutdown phase */
+#define STATUS_INITIALIZED (1<<5) /* Card is ready for external calls */
+#define STATUS_ASSOCIATING (1<<9) /* Associated, but no BSSID yet */
+#define STATUS_ASSOCIATED (1<<10) /* Associated and BSSID valid */
+#define STATUS_INT_ENABLED (1<<11)
+#define STATUS_RF_KILL_HW (1<<12)
+#define STATUS_RF_KILL_SW (1<<13)
+#define STATUS_RF_KILL_MASK (STATUS_RF_KILL_HW | STATUS_RF_KILL_SW)
+#define STATUS_EXIT_PENDING (1<<14)
+
+#define STATUS_SCAN_PENDING (1<<23)
+#define STATUS_SCANNING (1<<24)
+#define STATUS_SCAN_ABORTING (1<<25)
+#define STATUS_SCAN_COMPLETE (1<<26)
+#define STATUS_WX_EVENT_PENDING (1<<27)
+#define STATUS_RESET_PENDING (1<<29)
+#define STATUS_SECURITY_UPDATED (1<<30) /* Security sync needed */
+
+
+
+/* Internal NIC states */
+#define IPW_STATE_INITIALIZED (1<<0)
+#define IPW_STATE_COUNTRY_FOUND (1<<1)
+#define IPW_STATE_ASSOCIATED (1<<2)
+#define IPW_STATE_ASSN_LOST (1<<3)
+#define IPW_STATE_ASSN_CHANGED (1<<4)
+#define IPW_STATE_SCAN_COMPLETE (1<<5)
+#define IPW_STATE_ENTERED_PSP (1<<6)
+#define IPW_STATE_LEFT_PSP (1<<7)
+#define IPW_STATE_RF_KILL (1<<8)
+#define IPW_STATE_DISABLED (1<<9)
+#define IPW_STATE_POWER_DOWN (1<<10)
+#define IPW_STATE_SCANNING (1<<11)
+
+
+
+#define CFG_STATIC_CHANNEL (1<<0) /* Restrict assoc. to single channel */
+#define CFG_STATIC_ESSID (1<<1) /* Restrict assoc. to single SSID */
+#define CFG_STATIC_BSSID (1<<2) /* Restrict assoc. to single BSSID */
+#define CFG_CUSTOM_MAC (1<<3)
+#define CFG_LONG_PREAMBLE (1<<4)
+#define CFG_ASSOCIATE (1<<6)
+#define CFG_FIXED_RATE (1<<7)
+#define CFG_ADHOC_CREATE (1<<8)
+#define CFG_C3_DISABLED (1<<9)
+#define CFG_PASSIVE_SCAN (1<<10)
+
+#define CAP_SHARED_KEY (1<<0) /* Off = OPEN */
+#define CAP_PRIVACY_ON (1<<1) /* Off = No privacy */
+
+struct ipw2100_priv {
+
+ int stop_hang_check; /* Set 1 when shutting down to kill hang_check */
+ int stop_rf_kill; /* Set 1 when shutting down to kill rf_kill */
+
+ struct ieee80211_device *ieee;
+ unsigned long status;
+ unsigned long config;
+ unsigned long capability;
+
+ /* Statistics */
+ int resets;
+ int reset_backoff;
+
+ /* Context */
+ u8 essid[IW_ESSID_MAX_SIZE];
+ u8 essid_len;
+ u8 bssid[ETH_ALEN];
+ u8 channel;
+ int last_mode;
+ int cstate_limit;
+
+ unsigned long connect_start;
+ unsigned long last_reset;
+
+ u32 channel_mask;
+ u32 fatal_error;
+ u32 fatal_errors[IPW2100_ERROR_QUEUE];
+ u32 fatal_index;
+ int eeprom_version;
+ int firmware_version;
+ unsigned long hw_features;
+ int hangs;
+ u32 last_rtc;
+ int dump_raw; /* 1 to dump raw bytes in /sys/.../memory */
+ u8* snapshot[0x30];
+
+ u8 mandatory_bssid_mac[ETH_ALEN];
+ u8 mac_addr[ETH_ALEN];
+
+ int power_mode;
+
+ /* WEP data */
+ struct ieee80211_security sec;
+ int messages_sent;
+
+
+ int short_retry_limit;
+ int long_retry_limit;
+
+ u32 rts_threshold;
+ u32 frag_threshold;
+
+ int in_isr;
+
+ u32 tx_rates;
+ int tx_power;
+ u32 beacon_interval;
+
+ char nick[IW_ESSID_MAX_SIZE + 1];
+
+ struct ipw2100_status_queue status_queue;
+
+ struct statistic txq_stat;
+ struct statistic rxq_stat;
+ struct ipw2100_bd_queue rx_queue;
+ struct ipw2100_bd_queue tx_queue;
+ struct ipw2100_rx_packet *rx_buffers;
+
+ struct statistic fw_pend_stat;
+ struct list_head fw_pend_list;
+
+ struct statistic msg_free_stat;
+ struct statistic msg_pend_stat;
+ struct list_head msg_free_list;
+ struct list_head msg_pend_list;
+ struct ipw2100_tx_packet *msg_buffers;
+
+ struct statistic tx_free_stat;
+ struct statistic tx_pend_stat;
+ struct list_head tx_free_list;
+ struct list_head tx_pend_list;
+ struct ipw2100_tx_packet *tx_buffers;
+
+ struct ipw2100_ordinals ordinals;
+
+ struct pci_dev *pci_dev;
+
+ struct proc_dir_entry *dir_dev;
+
+ struct net_device *net_dev;
+ struct iw_statistics wstats;
+
+ struct tasklet_struct irq_tasklet;
+
+ struct workqueue_struct *workqueue;
+ struct work_struct reset_work;
+ struct work_struct security_work;
+ struct work_struct wx_event_work;
+ struct work_struct hang_check;
+ struct work_struct rf_kill;
+
+ u32 interrupts;
+ int tx_interrupts;
+ int rx_interrupts;
+ int inta_other;
+
+ spinlock_t low_lock;
+ struct semaphore action_sem;
+ struct semaphore adapter_sem;
+
+ wait_queue_head_t wait_command_queue;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+ u32 pm_state[PM_STATE_SIZE];
+#endif
+};
+
+
+/*********************************************************
+ * Host Command -> From Driver to FW
+ *********************************************************/
+
+/**
+ * Host command identifiers
+ */
+#define HOST_COMPLETE 2
+#define SYSTEM_CONFIG 6
+#define SSID 8
+#define MANDATORY_BSSID 9
+#define AUTHENTICATION_TYPE 10
+#define ADAPTER_ADDRESS 11
+#define PORT_TYPE 12
+#define INTERNATIONAL_MODE 13
+#define CHANNEL 14
+#define RTS_THRESHOLD 15
+#define FRAG_THRESHOLD 16
+#define POWER_MODE 17
+#define TX_RATES 18
+#define BASIC_TX_RATES 19
+#define WEP_KEY_INFO 20
+#define WEP_KEY_INDEX 25
+#define WEP_FLAGS 26
+#define ADD_MULTICAST 27
+#define CLEAR_ALL_MULTICAST 28
+#define BEACON_INTERVAL 29
+#define ATIM_WINDOW 30
+#define CLEAR_STATISTICS 31
+#define SEND 33
+#define TX_POWER_INDEX 36
+#define BROADCAST_SCAN 43
+#define CARD_DISABLE 44
+#define PREFERRED_BSSID 45
+#define SET_SCAN_OPTIONS 46
+#define SCAN_DWELL_TIME 47
+#define SWEEP_TABLE 48
+#define AP_OR_STATION_TABLE 49
+#define GROUP_ORDINALS 50
+#define SHORT_RETRY_LIMIT 51
+#define LONG_RETRY_LIMIT 52
+
+#define HOST_PRE_POWER_DOWN 58
+#define CARD_DISABLE_PHY_OFF 61
+#define MSDU_TX_RATES 62
+
+
+// Rogue AP Detection
+#define SET_STATION_STAT_BITS 64
+#define CLEAR_STATIONS_STAT_BITS 65
+#define LEAP_ROGUE_MODE 66 //TODO tbw replaced by CFG_LEAP_ROGUE_AP
+#define SET_SECURITY_INFORMATION 67
+#define DISASSOCIATION_BSSID 68
+#define SET_WPA_IE 69
+
+
+
+// system configuration bit mask:
+//#define IPW_CFG_ANTENNA_SETTING 0x03
+//#define IPW_CFG_ANTENNA_A 0x01
+//#define IPW_CFG_ANTENNA_B 0x02
+#define IPW_CFG_MONITOR 0x00004
+//#define IPW_CFG_TX_STATUS_ENABLE 0x00008
+#define IPW_CFG_PREAMBLE_AUTO 0x00010
+#define IPW_CFG_IBSS_AUTO_START 0x00020
+//#define IPW_CFG_KERBEROS_ENABLE 0x00040
+#define IPW_CFG_LOOPBACK 0x00100
+//#define IPW_CFG_WNMP_PING_PASS 0x00200
+//#define IPW_CFG_DEBUG_ENABLE 0x00400
+#define IPW_CFG_ANSWER_BCSSID_PROBE 0x00800
+//#define IPW_CFG_BT_PRIORITY 0x01000
+#define IPW_CFG_BT_SIDEBAND_SIGNAL 0x02000
+#define IPW_CFG_802_1x_ENABLE 0x04000
+#define IPW_CFG_BSS_MASK 0x08000
+#define IPW_CFG_IBSS_MASK 0x10000
+//#define IPW_CFG_DYNAMIC_CW 0x10000
+
+#define IPW_SCAN_NOASSOCIATE (1<<0)
+#define IPW_SCAN_MIXED_CELL (1<<1)
+/* RESERVED (1<<2) */
+#define IPW_SCAN_PASSIVE (1<<3)
+
+#define IPW_NIC_FATAL_ERROR 0x2A7F0
+#define IPW_ERROR_ADDR(x) (x & 0x3FFFF)
+#define IPW_ERROR_CODE(x) ((x & 0xFF000000) >> 24)
+#define IPW2100_ERR_C3_CORRUPTION (0x10 << 24)
+#define IPW2100_ERR_MSG_TIMEOUT (0x11 << 24)
+#define IPW2100_ERR_FW_LOAD (0x12 << 24)
+
+#define IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND 0x200
+#define IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x0D80
+
+#define IPW_MEM_HOST_SHARED_RX_BD_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x40)
+#define IPW_MEM_HOST_SHARED_RX_STATUS_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x44)
+#define IPW_MEM_HOST_SHARED_RX_BD_SIZE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x48)
+#define IPW_MEM_HOST_SHARED_RX_READ_INDEX (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0xa0)
+
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x00)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x04)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x80)
+
+#define IPW_MEM_HOST_SHARED_RX_WRITE_INDEX \
+ (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x20)
+
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX \
+ (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND)
+
+
+#if 0
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_0_BD_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x00)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_0_BD_SIZE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x04)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_1_BD_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x08)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_1_BD_SIZE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x0c)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_2_BD_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x10)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_2_BD_SIZE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x14)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_3_BD_BASE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x18)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_3_BD_SIZE (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x1c)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_0_READ_INDEX (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x80)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_1_READ_INDEX (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x84)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_2_READ_INDEX (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x88)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_3_READ_INDEX (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x8c)
+
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE(QueueNum) \
+ (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + (QueueNum<<3))
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE(QueueNum) \
+ (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x0004+(QueueNum<<3))
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX(QueueNum) \
+ (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x0080+(QueueNum<<2))
+
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_0_WRITE_INDEX \
+ (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x00)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_1_WRITE_INDEX \
+ (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x04)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_2_WRITE_INDEX \
+ (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x08)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_3_WRITE_INDEX \
+ (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x0c)
+#define IPW_MEM_HOST_SHARED_SLAVE_MODE_INT_REGISTER \
+ (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x78)
+
+#endif
+
+#define IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1 (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x180)
+#define IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2 (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x184)
+
+#define IPW2100_INTA_TX_TRANSFER (0x00000001) // Bit 0 (LSB)
+#define IPW2100_INTA_RX_TRANSFER (0x00000002) // Bit 1
+#define IPW2100_INTA_TX_COMPLETE (0x00000004) // Bit 2
+#define IPW2100_INTA_EVENT_INTERRUPT (0x00000008) // Bit 3
+#define IPW2100_INTA_STATUS_CHANGE (0x00000010) // Bit 4
+#define IPW2100_INTA_BEACON_PERIOD_EXPIRED (0x00000020) // Bit 5
+#define IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE (0x00010000) // Bit 16
+#define IPW2100_INTA_FW_INIT_DONE (0x01000000) // Bit 24
+#define IPW2100_INTA_FW_CALIBRATION_CALC (0x02000000) // Bit 25
+#define IPW2100_INTA_FATAL_ERROR (0x40000000) // Bit 30
+#define IPW2100_INTA_PARITY_ERROR (0x80000000) // Bit 31 (MSB)
+
+#define IPW_AUX_HOST_RESET_REG_PRINCETON_RESET (0x00000001)
+#define IPW_AUX_HOST_RESET_REG_FORCE_NMI (0x00000002)
+#define IPW_AUX_HOST_RESET_REG_PCI_HOST_CLUSTER_FATAL_NMI (0x00000004)
+#define IPW_AUX_HOST_RESET_REG_CORE_FATAL_NMI (0x00000008)
+#define IPW_AUX_HOST_RESET_REG_SW_RESET (0x00000080)
+#define IPW_AUX_HOST_RESET_REG_MASTER_DISABLED (0x00000100)
+#define IPW_AUX_HOST_RESET_REG_STOP_MASTER (0x00000200)
+
+#define IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY (0x00000001) // Bit 0 (LSB)
+#define IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY (0x00000002) // Bit 1
+#define IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE (0x00000004) // Bit 2
+#define IPW_AUX_HOST_GP_CNTRL_BITS_SYS_CONFIG (0x000007c0) // Bits 6-10
+#define IPW_AUX_HOST_GP_CNTRL_BIT_BUS_TYPE (0x00000200) // Bit 9
+#define IPW_AUX_HOST_GP_CNTRL_BIT_BAR0_BLOCK_SIZE (0x00000400) // Bit 10
+#define IPW_AUX_HOST_GP_CNTRL_BIT_USB_MODE (0x20000000) // Bit 29
+#define IPW_AUX_HOST_GP_CNTRL_BIT_HOST_FORCES_SYS_CLK (0x40000000) // Bit 30
+#define IPW_AUX_HOST_GP_CNTRL_BIT_FW_FORCES_SYS_CLK (0x80000000) // Bit 31 (MSB)
+
+#define IPW_BIT_GPIO_GPIO1_MASK 0x0000000C
+#define IPW_BIT_GPIO_GPIO3_MASK 0x000000C0
+#define IPW_BIT_GPIO_GPIO1_ENABLE 0x00000008
+#define IPW_BIT_GPIO_RF_KILL 0x00010000
+
+#define IPW_BIT_GPIO_LED_OFF 0x00002000 // Bit 13 = 1
+
+#define IPW_REG_DOMAIN_0_OFFSET 0x0000
+#define IPW_REG_DOMAIN_1_OFFSET IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND
+
+#define IPW_REG_INTA IPW_REG_DOMAIN_0_OFFSET + 0x0008
+#define IPW_REG_INTA_MASK IPW_REG_DOMAIN_0_OFFSET + 0x000C
+#define IPW_REG_INDIRECT_ACCESS_ADDRESS IPW_REG_DOMAIN_0_OFFSET + 0x0010
+#define IPW_REG_INDIRECT_ACCESS_DATA IPW_REG_DOMAIN_0_OFFSET + 0x0014
+#define IPW_REG_AUTOINCREMENT_ADDRESS IPW_REG_DOMAIN_0_OFFSET + 0x0018
+#define IPW_REG_AUTOINCREMENT_DATA IPW_REG_DOMAIN_0_OFFSET + 0x001C
+#define IPW_REG_RESET_REG IPW_REG_DOMAIN_0_OFFSET + 0x0020
+#define IPW_REG_GP_CNTRL IPW_REG_DOMAIN_0_OFFSET + 0x0024
+#define IPW_REG_GPIO IPW_REG_DOMAIN_0_OFFSET + 0x0030
+#define IPW_REG_FW_TYPE IPW_REG_DOMAIN_1_OFFSET + 0x0188
+#define IPW_REG_FW_VERSION IPW_REG_DOMAIN_1_OFFSET + 0x018C
+#define IPW_REG_FW_COMPATABILITY_VERSION IPW_REG_DOMAIN_1_OFFSET + 0x0190
+
+#define IPW_REG_INDIRECT_ADDR_MASK 0x00FFFFFC
+
+#define IPW_INTERRUPT_MASK 0xC1010013
+
+#define IPW2100_CONTROL_REG 0x220000
+#define IPW2100_CONTROL_PHY_OFF 0x8
+
+#define IPW2100_COMMAND 0x00300004
+#define IPW2100_COMMAND_PHY_ON 0x0
+#define IPW2100_COMMAND_PHY_OFF 0x1
+
+/* in DEBUG_AREA, values of memory always 0xd55555d5 */
+#define IPW_REG_DOA_DEBUG_AREA_START IPW_REG_DOMAIN_0_OFFSET + 0x0090
+#define IPW_REG_DOA_DEBUG_AREA_END IPW_REG_DOMAIN_0_OFFSET + 0x00FF
+#define IPW_DATA_DOA_DEBUG_VALUE 0xd55555d5
+
+#define IPW_INTERNAL_REGISTER_HALT_AND_RESET 0x003000e0
+
+#define IPW_WAIT_CLOCK_STABILIZATION_DELAY 50 // micro seconds
+#define IPW_WAIT_RESET_ARC_COMPLETE_DELAY 10 // micro seconds
+#define IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY 10 // micro seconds
+
+// BD ring queue read/write difference
+#define IPW_BD_QUEUE_W_R_MIN_SPARE 2
+
+#define IPW_CACHE_LINE_LENGTH_DEFAULT 0x80
+
+#define IPW_CARD_DISABLE_PHY_OFF_COMPLETE_WAIT 100 // 100 milli
+#define IPW_PREPARE_POWER_DOWN_COMPLETE_WAIT 100 // 100 milli
+
+
+
+
+#define IPW_HEADER_802_11_SIZE sizeof(struct ieee80211_hdr_3addr)
+#define IPW_MAX_80211_PAYLOAD_SIZE 2304U
+#define IPW_MAX_802_11_PAYLOAD_LENGTH 2312
+#define IPW_MAX_ACCEPTABLE_TX_FRAME_LENGTH 1536
+#define IPW_MIN_ACCEPTABLE_RX_FRAME_LENGTH 60
+#define IPW_MAX_ACCEPTABLE_RX_FRAME_LENGTH \
+ (IPW_MAX_ACCEPTABLE_TX_FRAME_LENGTH + IPW_HEADER_802_11_SIZE - \
+ sizeof(struct ethhdr))
+
+#define IPW_802_11_FCS_LENGTH 4
+#define IPW_RX_NIC_BUFFER_LENGTH \
+ (IPW_MAX_802_11_PAYLOAD_LENGTH + IPW_HEADER_802_11_SIZE + \
+ IPW_802_11_FCS_LENGTH)
+
+#define IPW_802_11_PAYLOAD_OFFSET \
+ (sizeof(struct ieee80211_hdr_3addr) + \
+ sizeof(struct ieee80211_snap_hdr))
+
+struct ipw2100_rx {
+ union {
+ unsigned char payload[IPW_RX_NIC_BUFFER_LENGTH];
+ struct ieee80211_hdr header;
+ u32 status;
+ struct ipw2100_notification notification;
+ struct ipw2100_cmd_header command;
+ } rx_data;
+} __attribute__ ((packed));
+
+// Bit 0-7 are for 802.11b tx rates - . Bit 5-7 are reserved
+#define TX_RATE_1_MBIT 0x0001
+#define TX_RATE_2_MBIT 0x0002
+#define TX_RATE_5_5_MBIT 0x0004
+#define TX_RATE_11_MBIT 0x0008
+#define TX_RATE_MASK 0x000F
+#define DEFAULT_TX_RATES 0x000F
+
+#define IPW_POWER_MODE_CAM 0x00 //(always on)
+#define IPW_POWER_INDEX_1 0x01
+#define IPW_POWER_INDEX_2 0x02
+#define IPW_POWER_INDEX_3 0x03
+#define IPW_POWER_INDEX_4 0x04
+#define IPW_POWER_INDEX_5 0x05
+#define IPW_POWER_AUTO 0x06
+#define IPW_POWER_MASK 0x0F
+#define IPW_POWER_ENABLED 0x10
+#define IPW_POWER_LEVEL(x) ((x) & IPW_POWER_MASK)
+
+#define IPW_TX_POWER_AUTO 0
+#define IPW_TX_POWER_ENHANCED 1
+
+#define IPW_TX_POWER_DEFAULT 32
+#define IPW_TX_POWER_MIN 0
+#define IPW_TX_POWER_MAX 16
+#define IPW_TX_POWER_MIN_DBM (-12)
+#define IPW_TX_POWER_MAX_DBM 16
+
+#define FW_SCAN_DONOT_ASSOCIATE 0x0001 // Dont Attempt to Associate after Scan
+#define FW_SCAN_PASSIVE 0x0008 // Force PASSSIVE Scan
+
+#define REG_MIN_CHANNEL 0
+#define REG_MAX_CHANNEL 14
+
+#define REG_CHANNEL_MASK 0x00003FFF
+#define IPW_IBSS_11B_DEFAULT_MASK 0x87ff
+
+#define DIVERSITY_EITHER 0 // Use both antennas
+#define DIVERSITY_ANTENNA_A 1 // Use antenna A
+#define DIVERSITY_ANTENNA_B 2 // Use antenna B
+
+
+#define HOST_COMMAND_WAIT 0
+#define HOST_COMMAND_NO_WAIT 1
+
+#define LOCK_NONE 0
+#define LOCK_DRIVER 1
+#define LOCK_FW 2
+
+#define TYPE_SWEEP_ORD 0x000D
+#define TYPE_IBSS_STTN_ORD 0x000E
+#define TYPE_BSS_AP_ORD 0x000F
+#define TYPE_RAW_BEACON_ENTRY 0x0010
+#define TYPE_CALIBRATION_DATA 0x0011
+#define TYPE_ROGUE_AP_DATA 0x0012
+#define TYPE_ASSOCIATION_REQUEST 0x0013
+#define TYPE_REASSOCIATION_REQUEST 0x0014
+
+
+#define HW_FEATURE_RFKILL (0x0001)
+#define RF_KILLSWITCH_OFF (1)
+#define RF_KILLSWITCH_ON (0)
+
+#define IPW_COMMAND_POOL_SIZE 40
+
+#define IPW_START_ORD_TAB_1 1
+#define IPW_START_ORD_TAB_2 1000
+
+#define IPW_ORD_TAB_1_ENTRY_SIZE sizeof(u32)
+
+#define IS_ORDINAL_TABLE_ONE(mgr,id) \
+ ((id >= IPW_START_ORD_TAB_1) && (id < mgr->table1_size))
+#define IS_ORDINAL_TABLE_TWO(mgr,id) \
+ ((id >= IPW_START_ORD_TAB_2) && (id < (mgr->table2_size + IPW_START_ORD_TAB_2)))
+
+#define BSS_ID_LENGTH 6
+
+// Fixed size data: Ordinal Table 1
+typedef enum _ORDINAL_TABLE_1 { // NS - means Not Supported by FW
+// Transmit statistics
+ IPW_ORD_STAT_TX_HOST_REQUESTS = 1,// # of requested Host Tx's (MSDU)
+ IPW_ORD_STAT_TX_HOST_COMPLETE, // # of successful Host Tx's (MSDU)
+ IPW_ORD_STAT_TX_DIR_DATA, // # of successful Directed Tx's (MSDU)
+
+ IPW_ORD_STAT_TX_DIR_DATA1 = 4, // # of successful Directed Tx's (MSDU) @ 1MB
+ IPW_ORD_STAT_TX_DIR_DATA2, // # of successful Directed Tx's (MSDU) @ 2MB
+ IPW_ORD_STAT_TX_DIR_DATA5_5, // # of successful Directed Tx's (MSDU) @ 5_5MB
+ IPW_ORD_STAT_TX_DIR_DATA11, // # of successful Directed Tx's (MSDU) @ 11MB
+ IPW_ORD_STAT_TX_DIR_DATA22, // # of successful Directed Tx's (MSDU) @ 22MB
+
+ IPW_ORD_STAT_TX_NODIR_DATA1 = 13,// # of successful Non_Directed Tx's (MSDU) @ 1MB
+ IPW_ORD_STAT_TX_NODIR_DATA2, // # of successful Non_Directed Tx's (MSDU) @ 2MB
+ IPW_ORD_STAT_TX_NODIR_DATA5_5, // # of successful Non_Directed Tx's (MSDU) @ 5.5MB
+ IPW_ORD_STAT_TX_NODIR_DATA11, // # of successful Non_Directed Tx's (MSDU) @ 11MB
+
+ IPW_ORD_STAT_NULL_DATA = 21, // # of successful NULL data Tx's
+ IPW_ORD_STAT_TX_RTS, // # of successful Tx RTS
+ IPW_ORD_STAT_TX_CTS, // # of successful Tx CTS
+ IPW_ORD_STAT_TX_ACK, // # of successful Tx ACK
+ IPW_ORD_STAT_TX_ASSN, // # of successful Association Tx's
+ IPW_ORD_STAT_TX_ASSN_RESP, // # of successful Association response Tx's
+ IPW_ORD_STAT_TX_REASSN, // # of successful Reassociation Tx's
+ IPW_ORD_STAT_TX_REASSN_RESP, // # of successful Reassociation response Tx's
+ IPW_ORD_STAT_TX_PROBE, // # of probes successfully transmitted
+ IPW_ORD_STAT_TX_PROBE_RESP, // # of probe responses successfully transmitted
+ IPW_ORD_STAT_TX_BEACON, // # of tx beacon
+ IPW_ORD_STAT_TX_ATIM, // # of Tx ATIM
+ IPW_ORD_STAT_TX_DISASSN, // # of successful Disassociation TX
+ IPW_ORD_STAT_TX_AUTH, // # of successful Authentication Tx
+ IPW_ORD_STAT_TX_DEAUTH, // # of successful Deauthentication TX
+
+ IPW_ORD_STAT_TX_TOTAL_BYTES = 41,// Total successful Tx data bytes
+ IPW_ORD_STAT_TX_RETRIES, // # of Tx retries
+ IPW_ORD_STAT_TX_RETRY1, // # of Tx retries at 1MBPS
+ IPW_ORD_STAT_TX_RETRY2, // # of Tx retries at 2MBPS
+ IPW_ORD_STAT_TX_RETRY5_5, // # of Tx retries at 5.5MBPS
+ IPW_ORD_STAT_TX_RETRY11, // # of Tx retries at 11MBPS
+
+ IPW_ORD_STAT_TX_FAILURES = 51, // # of Tx Failures
+ IPW_ORD_STAT_TX_ABORT_AT_HOP, //NS // # of Tx's aborted at hop time
+ IPW_ORD_STAT_TX_MAX_TRIES_IN_HOP,// # of times max tries in a hop failed
+ IPW_ORD_STAT_TX_ABORT_LATE_DMA, //NS // # of times tx aborted due to late dma setup
+ IPW_ORD_STAT_TX_ABORT_STX, //NS // # of times backoff aborted
+ IPW_ORD_STAT_TX_DISASSN_FAIL, // # of times disassociation failed
+ IPW_ORD_STAT_TX_ERR_CTS, // # of missed/bad CTS frames
+ IPW_ORD_STAT_TX_BPDU, //NS // # of spanning tree BPDUs sent
+ IPW_ORD_STAT_TX_ERR_ACK, // # of tx err due to acks
+
+ // Receive statistics
+ IPW_ORD_STAT_RX_HOST = 61, // # of packets passed to host
+ IPW_ORD_STAT_RX_DIR_DATA, // # of directed packets
+ IPW_ORD_STAT_RX_DIR_DATA1, // # of directed packets at 1MB
+ IPW_ORD_STAT_RX_DIR_DATA2, // # of directed packets at 2MB
+ IPW_ORD_STAT_RX_DIR_DATA5_5, // # of directed packets at 5.5MB
+ IPW_ORD_STAT_RX_DIR_DATA11, // # of directed packets at 11MB
+ IPW_ORD_STAT_RX_DIR_DATA22, // # of directed packets at 22MB
+
+ IPW_ORD_STAT_RX_NODIR_DATA = 71,// # of nondirected packets
+ IPW_ORD_STAT_RX_NODIR_DATA1, // # of nondirected packets at 1MB
+ IPW_ORD_STAT_RX_NODIR_DATA2, // # of nondirected packets at 2MB
+ IPW_ORD_STAT_RX_NODIR_DATA5_5, // # of nondirected packets at 5.5MB
+ IPW_ORD_STAT_RX_NODIR_DATA11, // # of nondirected packets at 11MB
+
+ IPW_ORD_STAT_RX_NULL_DATA = 80, // # of null data rx's
+ IPW_ORD_STAT_RX_POLL, //NS // # of poll rx
+ IPW_ORD_STAT_RX_RTS, // # of Rx RTS
+ IPW_ORD_STAT_RX_CTS, // # of Rx CTS
+ IPW_ORD_STAT_RX_ACK, // # of Rx ACK
+ IPW_ORD_STAT_RX_CFEND, // # of Rx CF End
+ IPW_ORD_STAT_RX_CFEND_ACK, // # of Rx CF End + CF Ack
+ IPW_ORD_STAT_RX_ASSN, // # of Association Rx's
+ IPW_ORD_STAT_RX_ASSN_RESP, // # of Association response Rx's
+ IPW_ORD_STAT_RX_REASSN, // # of Reassociation Rx's
+ IPW_ORD_STAT_RX_REASSN_RESP, // # of Reassociation response Rx's
+ IPW_ORD_STAT_RX_PROBE, // # of probe Rx's
+ IPW_ORD_STAT_RX_PROBE_RESP, // # of probe response Rx's
+ IPW_ORD_STAT_RX_BEACON, // # of Rx beacon
+ IPW_ORD_STAT_RX_ATIM, // # of Rx ATIM
+ IPW_ORD_STAT_RX_DISASSN, // # of disassociation Rx
+ IPW_ORD_STAT_RX_AUTH, // # of authentication Rx
+ IPW_ORD_STAT_RX_DEAUTH, // # of deauthentication Rx
+
+ IPW_ORD_STAT_RX_TOTAL_BYTES = 101,// Total rx data bytes received
+ IPW_ORD_STAT_RX_ERR_CRC, // # of packets with Rx CRC error
+ IPW_ORD_STAT_RX_ERR_CRC1, // # of Rx CRC errors at 1MB
+ IPW_ORD_STAT_RX_ERR_CRC2, // # of Rx CRC errors at 2MB
+ IPW_ORD_STAT_RX_ERR_CRC5_5, // # of Rx CRC errors at 5.5MB
+ IPW_ORD_STAT_RX_ERR_CRC11, // # of Rx CRC errors at 11MB
+
+ IPW_ORD_STAT_RX_DUPLICATE1 = 112, // # of duplicate rx packets at 1MB
+ IPW_ORD_STAT_RX_DUPLICATE2, // # of duplicate rx packets at 2MB
+ IPW_ORD_STAT_RX_DUPLICATE5_5, // # of duplicate rx packets at 5.5MB
+ IPW_ORD_STAT_RX_DUPLICATE11, // # of duplicate rx packets at 11MB
+ IPW_ORD_STAT_RX_DUPLICATE = 119, // # of duplicate rx packets
+
+ IPW_ORD_PERS_DB_LOCK = 120, // # locking fw permanent db
+ IPW_ORD_PERS_DB_SIZE, // # size of fw permanent db
+ IPW_ORD_PERS_DB_ADDR, // # address of fw permanent db
+ IPW_ORD_STAT_RX_INVALID_PROTOCOL, // # of rx frames with invalid protocol
+ IPW_ORD_SYS_BOOT_TIME, // # Boot time
+ IPW_ORD_STAT_RX_NO_BUFFER, // # of rx frames rejected due to no buffer
+ IPW_ORD_STAT_RX_ABORT_LATE_DMA, //NS // # of rx frames rejected due to dma setup too late
+ IPW_ORD_STAT_RX_ABORT_AT_HOP, //NS // # of rx frames aborted due to hop
+ IPW_ORD_STAT_RX_MISSING_FRAG, // # of rx frames dropped due to missing fragment
+ IPW_ORD_STAT_RX_ORPHAN_FRAG, // # of rx frames dropped due to non-sequential fragment
+ IPW_ORD_STAT_RX_ORPHAN_FRAME, // # of rx frames dropped due to unmatched 1st frame
+ IPW_ORD_STAT_RX_FRAG_AGEOUT, // # of rx frames dropped due to uncompleted frame
+ IPW_ORD_STAT_RX_BAD_SSID, //NS // Bad SSID (unused)
+ IPW_ORD_STAT_RX_ICV_ERRORS, // # of ICV errors during decryption
+
+// PSP Statistics
+ IPW_ORD_STAT_PSP_SUSPENSION = 137,// # of times adapter suspended
+ IPW_ORD_STAT_PSP_BCN_TIMEOUT, // # of beacon timeout
+ IPW_ORD_STAT_PSP_POLL_TIMEOUT, // # of poll response timeouts
+ IPW_ORD_STAT_PSP_NONDIR_TIMEOUT,// # of timeouts waiting for last broadcast/muticast pkt
+ IPW_ORD_STAT_PSP_RX_DTIMS, // # of PSP DTIMs received
+ IPW_ORD_STAT_PSP_RX_TIMS, // # of PSP TIMs received
+ IPW_ORD_STAT_PSP_STATION_ID, // PSP Station ID
+
+// Association and roaming
+ IPW_ORD_LAST_ASSN_TIME = 147, // RTC time of last association
+ IPW_ORD_STAT_PERCENT_MISSED_BCNS,// current calculation of % missed beacons
+ IPW_ORD_STAT_PERCENT_RETRIES, // current calculation of % missed tx retries
+ IPW_ORD_ASSOCIATED_AP_PTR, // If associated, this is ptr to the associated
+ // AP table entry. set to 0 if not associated
+ IPW_ORD_AVAILABLE_AP_CNT, // # of AP's decsribed in the AP table
+ IPW_ORD_AP_LIST_PTR, // Ptr to list of available APs
+ IPW_ORD_STAT_AP_ASSNS, // # of associations
+ IPW_ORD_STAT_ASSN_FAIL, // # of association failures
+ IPW_ORD_STAT_ASSN_RESP_FAIL, // # of failuresdue to response fail
+ IPW_ORD_STAT_FULL_SCANS, // # of full scans
+
+ IPW_ORD_CARD_DISABLED, // # Card Disabled
+ IPW_ORD_STAT_ROAM_INHIBIT, // # of times roaming was inhibited due to ongoing activity
+ IPW_FILLER_40,
+ IPW_ORD_RSSI_AT_ASSN = 160, // RSSI of associated AP at time of association
+ IPW_ORD_STAT_ASSN_CAUSE1, // # of reassociations due to no tx from AP in last N
+ // hops or no prob_ responses in last 3 minutes
+ IPW_ORD_STAT_ASSN_CAUSE2, // # of reassociations due to poor tx/rx quality
+ IPW_ORD_STAT_ASSN_CAUSE3, // # of reassociations due to tx/rx quality with excessive
+ // load at the AP
+ IPW_ORD_STAT_ASSN_CAUSE4, // # of reassociations due to AP RSSI level fell below
+ // eligible group
+ IPW_ORD_STAT_ASSN_CAUSE5, // # of reassociations due to load leveling
+ IPW_ORD_STAT_ASSN_CAUSE6, //NS // # of reassociations due to dropped by Ap
+ IPW_FILLER_41,
+ IPW_FILLER_42,
+ IPW_FILLER_43,
+ IPW_ORD_STAT_AUTH_FAIL, // # of times authentication failed
+ IPW_ORD_STAT_AUTH_RESP_FAIL, // # of times authentication response failed
+ IPW_ORD_STATION_TABLE_CNT, // # of entries in association table
+
+// Other statistics
+ IPW_ORD_RSSI_AVG_CURR = 173, // Current avg RSSI
+ IPW_ORD_STEST_RESULTS_CURR, //NS // Current self test results word
+ IPW_ORD_STEST_RESULTS_CUM, //NS // Cummulative self test results word
+ IPW_ORD_SELF_TEST_STATUS, //NS //
+ IPW_ORD_POWER_MGMT_MODE, // Power mode - 0=CAM, 1=PSP
+ IPW_ORD_POWER_MGMT_INDEX, //NS //
+ IPW_ORD_COUNTRY_CODE, // IEEE country code as recv'd from beacon
+ IPW_ORD_COUNTRY_CHANNELS, // channels suported by country
+// IPW_ORD_COUNTRY_CHANNELS:
+// For 11b the lower 2-byte are used for channels from 1-14
+// and the higher 2-byte are not used.
+ IPW_ORD_RESET_CNT, // # of adapter resets (warm)
+ IPW_ORD_BEACON_INTERVAL, // Beacon interval
+
+ IPW_ORD_PRINCETON_VERSION = 184, //NS // Princeton Version
+ IPW_ORD_ANTENNA_DIVERSITY, // TRUE if antenna diversity is disabled
+ IPW_ORD_CCA_RSSI, //NS // CCA RSSI value (factory programmed)
+ IPW_ORD_STAT_EEPROM_UPDATE, //NS // # of times config EEPROM updated
+ IPW_ORD_DTIM_PERIOD, // # of beacon intervals between DTIMs
+ IPW_ORD_OUR_FREQ, // current radio freq lower digits - channel ID
+
+ IPW_ORD_RTC_TIME = 190, // current RTC time
+ IPW_ORD_PORT_TYPE, // operating mode
+ IPW_ORD_CURRENT_TX_RATE, // current tx rate
+ IPW_ORD_SUPPORTED_RATES, // Bitmap of supported tx rates
+ IPW_ORD_ATIM_WINDOW, // current ATIM Window
+ IPW_ORD_BASIC_RATES, // bitmap of basic tx rates
+ IPW_ORD_NIC_HIGHEST_RATE, // bitmap of basic tx rates
+ IPW_ORD_AP_HIGHEST_RATE, // bitmap of basic tx rates
+ IPW_ORD_CAPABILITIES, // Management frame capability field
+ IPW_ORD_AUTH_TYPE, // Type of authentication
+ IPW_ORD_RADIO_TYPE, // Adapter card platform type
+ IPW_ORD_RTS_THRESHOLD = 201, // Min length of packet after which RTS handshaking is used
+ IPW_ORD_INT_MODE, // International mode
+ IPW_ORD_FRAGMENTATION_THRESHOLD, // protocol frag threshold
+ IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, // EEPROM offset in SRAM
+ IPW_ORD_EEPROM_SRAM_DB_BLOCK_SIZE, // EEPROM size in SRAM
+ IPW_ORD_EEPROM_SKU_CAPABILITY, // EEPROM SKU Capability 206 =
+ IPW_ORD_EEPROM_IBSS_11B_CHANNELS, // EEPROM IBSS 11b channel set
+
+ IPW_ORD_MAC_VERSION = 209, // MAC Version
+ IPW_ORD_MAC_REVISION, // MAC Revision
+ IPW_ORD_RADIO_VERSION, // Radio Version
+ IPW_ORD_NIC_MANF_DATE_TIME, // MANF Date/Time STAMP
+ IPW_ORD_UCODE_VERSION, // Ucode Version
+ IPW_ORD_HW_RF_SWITCH_STATE = 214, // HW RF Kill Switch State
+} ORDINALTABLE1;
+//ENDOF TABLE1
+
+// ordinal table 2
+// Variable length data:
+#define IPW_FIRST_VARIABLE_LENGTH_ORDINAL 1001
+
+typedef enum _ORDINAL_TABLE_2 { // NS - means Not Supported by FW
+ IPW_ORD_STAT_BASE = 1000, // contains number of variable ORDs
+ IPW_ORD_STAT_ADAPTER_MAC = 1001, // 6 bytes: our adapter MAC address
+ IPW_ORD_STAT_PREFERRED_BSSID = 1002, // 6 bytes: BSSID of the preferred AP
+ IPW_ORD_STAT_MANDATORY_BSSID = 1003, // 6 bytes: BSSID of the mandatory AP
+ IPW_FILL_1, //NS //
+ IPW_ORD_STAT_COUNTRY_TEXT = 1005, // 36 bytes: Country name text, First two bytes are Country code
+ IPW_ORD_STAT_ASSN_SSID = 1006, // 32 bytes: ESSID String
+ IPW_ORD_STATION_TABLE = 1007, // ? bytes: Station/AP table (via Direct SSID Scans)
+ IPW_ORD_STAT_SWEEP_TABLE = 1008, // ? bytes: Sweep/Host Table table (via Broadcast Scans)
+ IPW_ORD_STAT_ROAM_LOG = 1009, // ? bytes: Roaming log
+ IPW_ORD_STAT_RATE_LOG = 1010, //NS // 0 bytes: Rate log
+ IPW_ORD_STAT_FIFO = 1011, //NS // 0 bytes: Fifo buffer data structures
+ IPW_ORD_STAT_FW_VER_NUM = 1012, // 14 bytes: fw version ID string as in (a.bb.ccc; "0.08.011")
+ IPW_ORD_STAT_FW_DATE = 1013, // 14 bytes: fw date string (mmm dd yyyy; "Mar 13 2002")
+ IPW_ORD_STAT_ASSN_AP_BSSID = 1014, // 6 bytes: MAC address of associated AP
+ IPW_ORD_STAT_DEBUG = 1015, //NS // ? bytes:
+ IPW_ORD_STAT_NIC_BPA_NUM = 1016, // 11 bytes: NIC BPA number in ASCII
+ IPW_ORD_STAT_UCODE_DATE = 1017, // 5 bytes: uCode date
+ IPW_ORD_SECURITY_NGOTIATION_RESULT = 1018,
+} ORDINALTABLE2; // NS - means Not Supported by FW
+
+#define IPW_LAST_VARIABLE_LENGTH_ORDINAL 1018
+
+#ifndef WIRELESS_SPY
+#define WIRELESS_SPY // enable iwspy support
+#endif
+
+extern struct iw_handler_def ipw2100_wx_handler_def;
+extern struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev);
+extern void ipw2100_wx_event_work(struct ipw2100_priv *priv);
+
+#define IPW_HOST_FW_SHARED_AREA0 0x0002f200
+#define IPW_HOST_FW_SHARED_AREA0_END 0x0002f510 // 0x310 bytes
+
+#define IPW_HOST_FW_SHARED_AREA1 0x0002f610
+#define IPW_HOST_FW_SHARED_AREA1_END 0x0002f630 // 0x20 bytes
+
+#define IPW_HOST_FW_SHARED_AREA2 0x0002fa00
+#define IPW_HOST_FW_SHARED_AREA2_END 0x0002fa20 // 0x20 bytes
+
+#define IPW_HOST_FW_SHARED_AREA3 0x0002fc00
+#define IPW_HOST_FW_SHARED_AREA3_END 0x0002fc10 // 0x10 bytes
+
+#define IPW_HOST_FW_INTERRUPT_AREA 0x0002ff80
+#define IPW_HOST_FW_INTERRUPT_AREA_END 0x00030000 // 0x80 bytes
+
+struct ipw2100_fw_chunk {
+ unsigned char *buf;
+ long len;
+ long pos;
+ struct list_head list;
+};
+
+struct ipw2100_fw_chunk_set {
+ const void *data;
+ unsigned long size;
+};
+
+struct ipw2100_fw {
+ int version;
+ struct ipw2100_fw_chunk_set fw;
+ struct ipw2100_fw_chunk_set uc;
+ const struct firmware *fw_entry;
+};
+
+int ipw2100_get_firmware(struct ipw2100_priv *priv, struct ipw2100_fw *fw);
+void ipw2100_release_firmware(struct ipw2100_priv *priv, struct ipw2100_fw *fw);
+int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw);
+int ipw2100_ucode_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw);
+
+#define MAX_FW_VERSION_LEN 14
+
+int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, size_t max);
+int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, size_t max);
+
+#endif /* _IPW2100_H */
--- /dev/null
+/******************************************************************************
+
+ Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved.
+
+ 802.11 status code portion of this file from ethereal-0.10.6:
+ Copyright 2000, Axis Communications AB
+ Ethereal - Network traffic analyzer
+ By Gerald Combs <gerald@ethereal.com>
+ Copyright 1998 Gerald Combs
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+
+#include "ipw2200.h"
+
+#define IPW2200_VERSION "1.0.0"
+#define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2200/2915 Network Driver"
+#define DRV_COPYRIGHT "Copyright(c) 2003-2004 Intel Corporation"
+#define DRV_VERSION IPW2200_VERSION
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+static int channel = 0;
+static char *ifname;
+static int mode = 0;
+
+static u32 ipw_debug_level;
+static int associate = 1;
+static int auto_create = 1;
+static int disable = 0;
+static const char ipw_modes[] = {
+ 'a', 'b', 'g', '?'
+};
+
+static void ipw_rx(struct ipw_priv *priv);
+static int ipw_queue_tx_reclaim(struct ipw_priv *priv,
+ struct clx2_tx_queue *txq, int qindex);
+static int ipw_queue_reset(struct ipw_priv *priv);
+
+static int ipw_queue_tx_hcmd(struct ipw_priv *priv, int hcmd, void *buf,
+ int len, int sync);
+
+static void ipw_tx_queue_free(struct ipw_priv *);
+
+static struct ipw_rx_queue *ipw_rx_queue_alloc(struct ipw_priv *);
+static void ipw_rx_queue_free(struct ipw_priv *, struct ipw_rx_queue *);
+static void ipw_rx_queue_replenish(void *);
+
+static int ipw_up(struct ipw_priv *);
+static void ipw_down(struct ipw_priv *);
+static int ipw_config(struct ipw_priv *);
+static int init_supported_rates(struct ipw_priv *priv, struct ipw_supported_rates *prates);
+
+static u8 band_b_active_channel[MAX_B_CHANNELS] = {
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 0
+};
+static u8 band_a_active_channel[MAX_A_CHANNELS] = {
+ 36, 40, 44, 48, 149, 153, 157, 161, 165, 52, 56, 60, 64, 0
+};
+
+static int is_valid_channel(int mode_mask, int channel)
+{
+ int i;
+
+ if (!channel)
+ return 0;
+
+ if (mode_mask & IEEE_A)
+ for (i = 0; i < MAX_A_CHANNELS; i++)
+ if (band_a_active_channel[i] == channel)
+ return IEEE_A;
+
+ if (mode_mask & (IEEE_B | IEEE_G))
+ for (i = 0; i < MAX_B_CHANNELS; i++)
+ if (band_b_active_channel[i] == channel)
+ return mode_mask & (IEEE_B | IEEE_G);
+
+ return 0;
+}
+
+static char *snprint_line(char *buf, size_t count,
+ const u8 *data, u32 len, u32 ofs)
+{
+ int out, i, j, l;
+ char c;
+
+ out = snprintf(buf, count, "%08X", ofs);
+
+ for (l = 0, i = 0; i < 2; i++) {
+ out += snprintf(buf + out, count - out, " ");
+ for (j = 0; j < 8 && l < len; j++, l++)
+ out += snprintf(buf + out, count - out, "%02X ",
+ data[(i * 8 + j)]);
+ for (; j < 8; j++)
+ out += snprintf(buf + out, count - out, " ");
+ }
+
+ out += snprintf(buf + out, count - out, " ");
+ for (l = 0, i = 0; i < 2; i++) {
+ out += snprintf(buf + out, count - out, " ");
+ for (j = 0; j < 8 && l < len; j++, l++) {
+ c = data[(i * 8 + j)];
+ if (!isascii(c) || !isprint(c))
+ c = '.';
+
+ out += snprintf(buf + out, count - out, "%c", c);
+ }
+
+ for (; j < 8; j++)
+ out += snprintf(buf + out, count - out, " ");
+ }
+
+ return buf;
+}
+
+static void printk_buf(int level, const u8 *data, u32 len)
+{
+ char line[81];
+ u32 ofs = 0;
+ if (!(ipw_debug_level & level))
+ return;
+
+ while (len) {
+ printk(KERN_DEBUG "%s\n",
+ snprint_line(line, sizeof(line), &data[ofs],
+ min(len, 16U), ofs));
+ ofs += 16;
+ len -= min(len, 16U);
+ }
+}
+
+static u32 _ipw_read_reg32(struct ipw_priv *priv, u32 reg);
+#define ipw_read_reg32(a, b) _ipw_read_reg32(a, b)
+
+static u8 _ipw_read_reg8(struct ipw_priv *ipw, u32 reg);
+#define ipw_read_reg8(a, b) _ipw_read_reg8(a, b)
+
+static void _ipw_write_reg8(struct ipw_priv *priv, u32 reg, u8 value);
+static inline void ipw_write_reg8(struct ipw_priv *a, u32 b, u8 c)
+{
+ IPW_DEBUG_IO("%s %d: write_indirect8(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(b), (u32)(c));
+ _ipw_write_reg8(a, b, c);
+}
+
+static void _ipw_write_reg16(struct ipw_priv *priv, u32 reg, u16 value);
+static inline void ipw_write_reg16(struct ipw_priv *a, u32 b, u16 c)
+{
+ IPW_DEBUG_IO("%s %d: write_indirect16(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(b), (u32)(c));
+ _ipw_write_reg16(a, b, c);
+}
+
+static void _ipw_write_reg32(struct ipw_priv *priv, u32 reg, u32 value);
+static inline void ipw_write_reg32(struct ipw_priv *a, u32 b, u32 c)
+{
+ IPW_DEBUG_IO("%s %d: write_indirect32(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(b), (u32)(c));
+ _ipw_write_reg32(a, b, c);
+}
+
+#define _ipw_write8(ipw, ofs, val) writeb((val), (ipw)->hw_base + (ofs))
+#define ipw_write8(ipw, ofs, val) \
+ IPW_DEBUG_IO("%s %d: write_direct8(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \
+ _ipw_write8(ipw, ofs, val)
+
+#define _ipw_write16(ipw, ofs, val) writew((val), (ipw)->hw_base + (ofs))
+#define ipw_write16(ipw, ofs, val) \
+ IPW_DEBUG_IO("%s %d: write_direct16(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \
+ _ipw_write16(ipw, ofs, val)
+
+#define _ipw_write32(ipw, ofs, val) writel((val), (ipw)->hw_base + (ofs))
+#define ipw_write32(ipw, ofs, val) \
+ IPW_DEBUG_IO("%s %d: write_direct32(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \
+ _ipw_write32(ipw, ofs, val)
+
+#define _ipw_read8(ipw, ofs) readb((ipw)->hw_base + (ofs))
+static inline u8 __ipw_read8(char *f, u32 l, struct ipw_priv *ipw, u32 ofs) {
+ IPW_DEBUG_IO("%s %d: read_direct8(0x%08X)\n", f, l, (u32)(ofs));
+ return _ipw_read8(ipw, ofs);
+}
+#define ipw_read8(ipw, ofs) __ipw_read8(__FILE__, __LINE__, ipw, ofs)
+
+#define _ipw_read16(ipw, ofs) readw((ipw)->hw_base + (ofs))
+static inline u16 __ipw_read16(char *f, u32 l, struct ipw_priv *ipw, u32 ofs) {
+ IPW_DEBUG_IO("%s %d: read_direct16(0x%08X)\n", f, l, (u32)(ofs));
+ return _ipw_read16(ipw, ofs);
+}
+#define ipw_read16(ipw, ofs) __ipw_read16(__FILE__, __LINE__, ipw, ofs)
+
+#define _ipw_read32(ipw, ofs) readl((ipw)->hw_base + (ofs))
+static inline u32 __ipw_read32(char *f, u32 l, struct ipw_priv *ipw, u32 ofs) {
+ IPW_DEBUG_IO("%s %d: read_direct32(0x%08X)\n", f, l, (u32)(ofs));
+ return _ipw_read32(ipw, ofs);
+}
+#define ipw_read32(ipw, ofs) __ipw_read32(__FILE__, __LINE__, ipw, ofs)
+
+static void _ipw_read_indirect(struct ipw_priv *, u32, u8 *, int);
+#define ipw_read_indirect(a, b, c, d) \
+ IPW_DEBUG_IO("%s %d: read_inddirect(0x%08X) %d bytes\n", __FILE__, __LINE__, (u32)(b), d); \
+ _ipw_read_indirect(a, b, c, d)
+
+static void _ipw_write_indirect(struct ipw_priv *priv, u32 addr, u8 *data, int num);
+#define ipw_write_indirect(a, b, c, d) \
+ IPW_DEBUG_IO("%s %d: write_indirect(0x%08X) %d bytes\n", __FILE__, __LINE__, (u32)(b), d); \
+ _ipw_write_indirect(a, b, c, d)
+
+/* indirect write s */
+static void _ipw_write_reg32(struct ipw_priv *priv, u32 reg,
+ u32 value)
+{
+ IPW_DEBUG_IO(" %p : reg = 0x%8X : value = 0x%8X\n",
+ priv, reg, value);
+ _ipw_write32(priv, CX2_INDIRECT_ADDR, reg);
+ _ipw_write32(priv, CX2_INDIRECT_DATA, value);
+}
+
+
+static void _ipw_write_reg8(struct ipw_priv *priv, u32 reg, u8 value)
+{
+ IPW_DEBUG_IO(" reg = 0x%8X : value = 0x%8X\n", reg, value);
+ _ipw_write32(priv, CX2_INDIRECT_ADDR, reg & CX2_INDIRECT_ADDR_MASK);
+ _ipw_write8(priv, CX2_INDIRECT_DATA, value);
+ IPW_DEBUG_IO(" reg = 0x%8X : value = 0x%8X\n",
+ (unsigned)(priv->hw_base + CX2_INDIRECT_DATA),
+ value);
+}
+
+static void _ipw_write_reg16(struct ipw_priv *priv, u32 reg,
+ u16 value)
+{
+ IPW_DEBUG_IO(" reg = 0x%8X : value = 0x%8X\n", reg, value);
+ _ipw_write32(priv, CX2_INDIRECT_ADDR, reg & CX2_INDIRECT_ADDR_MASK);
+ _ipw_write16(priv, CX2_INDIRECT_DATA, value);
+}
+
+/* indirect read s */
+
+static u8 _ipw_read_reg8(struct ipw_priv *priv, u32 reg)
+{
+ u32 word;
+ _ipw_write32(priv, CX2_INDIRECT_ADDR, reg & CX2_INDIRECT_ADDR_MASK);
+ IPW_DEBUG_IO(" reg = 0x%8X : \n", reg);
+ word = _ipw_read32(priv, CX2_INDIRECT_DATA);
+ return (word >> ((reg & 0x3)*8)) & 0xff;
+}
+
+static u32 _ipw_read_reg32(struct ipw_priv *priv, u32 reg)
+{
+ u32 value;
+
+ IPW_DEBUG_IO("%p : reg = 0x%08x\n", priv, reg);
+
+ _ipw_write32(priv, CX2_INDIRECT_ADDR, reg);
+ value = _ipw_read32(priv, CX2_INDIRECT_DATA);
+ IPW_DEBUG_IO(" reg = 0x%4X : value = 0x%4x \n", reg, value);
+ return value;
+}
+
+/* iterative/auto-increment 32 bit reads and writes */
+static void _ipw_read_indirect(struct ipw_priv *priv, u32 addr, u8 * buf,
+ int num)
+{
+ u32 aligned_addr = addr & CX2_INDIRECT_ADDR_MASK;
+ u32 dif_len = addr - aligned_addr;
+ u32 aligned_len;
+ u32 i;
+
+ IPW_DEBUG_IO("addr = %i, buf = %p, num = %i\n", addr, buf, num);
+
+ /* Read the first nibble byte by byte */
+ if (unlikely(dif_len)) {
+ /* Start reading at aligned_addr + dif_len */
+ _ipw_write32(priv, CX2_INDIRECT_ADDR, aligned_addr);
+ for (i = dif_len; i < 4; i++, buf++)
+ *buf = _ipw_read8(priv, CX2_INDIRECT_DATA + i);
+ num -= dif_len;
+ aligned_addr += 4;
+ }
+
+ /* Read DWs through autoinc register */
+ _ipw_write32(priv, CX2_AUTOINC_ADDR, aligned_addr);
+ aligned_len = num & CX2_INDIRECT_ADDR_MASK;
+ for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
+ *(u32*)buf = ipw_read32(priv, CX2_AUTOINC_DATA);
+
+ /* Copy the last nibble */
+ dif_len = num - aligned_len;
+ _ipw_write32(priv, CX2_INDIRECT_ADDR, aligned_addr);
+ for (i = 0; i < dif_len; i++, buf++)
+ *buf = ipw_read8(priv, CX2_INDIRECT_DATA + i);
+}
+
+static void _ipw_write_indirect(struct ipw_priv *priv, u32 addr, u8 *buf,
+ int num)
+{
+ u32 aligned_addr = addr & CX2_INDIRECT_ADDR_MASK;
+ u32 dif_len = addr - aligned_addr;
+ u32 aligned_len;
+ u32 i;
+
+ IPW_DEBUG_IO("addr = %i, buf = %p, num = %i\n", addr, buf, num);
+
+ /* Write the first nibble byte by byte */
+ if (unlikely(dif_len)) {
+ /* Start writing at aligned_addr + dif_len */
+ _ipw_write32(priv, CX2_INDIRECT_ADDR, aligned_addr);
+ for (i = dif_len; i < 4; i++, buf++)
+ _ipw_write8(priv, CX2_INDIRECT_DATA + i, *buf);
+ num -= dif_len;
+ aligned_addr += 4;
+ }
+
+ /* Write DWs through autoinc register */
+ _ipw_write32(priv, CX2_AUTOINC_ADDR, aligned_addr);
+ aligned_len = num & CX2_INDIRECT_ADDR_MASK;
+ for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
+ _ipw_write32(priv, CX2_AUTOINC_DATA, *(u32*)buf);
+
+ /* Copy the last nibble */
+ dif_len = num - aligned_len;
+ _ipw_write32(priv, CX2_INDIRECT_ADDR, aligned_addr);
+ for (i = 0; i < dif_len; i++, buf++)
+ _ipw_write8(priv, CX2_INDIRECT_DATA + i, *buf);
+}
+
+static void ipw_write_direct(struct ipw_priv *priv, u32 addr, void *buf,
+ int num)
+{
+ memcpy_toio((priv->hw_base + addr), buf, num);
+}
+
+static inline void ipw_set_bit(struct ipw_priv *priv, u32 reg, u32 mask)
+{
+ ipw_write32(priv, reg, ipw_read32(priv, reg) | mask);
+}
+
+static inline void ipw_clear_bit(struct ipw_priv *priv, u32 reg, u32 mask)
+{
+ ipw_write32(priv, reg, ipw_read32(priv, reg) & ~mask);
+}
+
+static inline void ipw_enable_interrupts(struct ipw_priv *priv)
+{
+ if (priv->status & STATUS_INT_ENABLED)
+ return;
+ priv->status |= STATUS_INT_ENABLED;
+ ipw_write32(priv, CX2_INTA_MASK_R, CX2_INTA_MASK_ALL);
+}
+
+static inline void ipw_disable_interrupts(struct ipw_priv *priv)
+{
+ if (!(priv->status & STATUS_INT_ENABLED))
+ return;
+ priv->status &= ~STATUS_INT_ENABLED;
+ ipw_write32(priv, CX2_INTA_MASK_R, ~CX2_INTA_MASK_ALL);
+}
+
+static char *ipw_error_desc(u32 val)
+{
+ switch (val) {
+ case IPW_FW_ERROR_OK:
+ return "ERROR_OK";
+ case IPW_FW_ERROR_FAIL:
+ return "ERROR_FAIL";
+ case IPW_FW_ERROR_MEMORY_UNDERFLOW:
+ return "MEMORY_UNDERFLOW";
+ case IPW_FW_ERROR_MEMORY_OVERFLOW:
+ return "MEMORY_OVERFLOW";
+ case IPW_FW_ERROR_BAD_PARAM:
+ return "ERROR_BAD_PARAM";
+ case IPW_FW_ERROR_BAD_CHECKSUM:
+ return "ERROR_BAD_CHECKSUM";
+ case IPW_FW_ERROR_NMI_INTERRUPT:
+ return "ERROR_NMI_INTERRUPT";
+ case IPW_FW_ERROR_BAD_DATABASE:
+ return "ERROR_BAD_DATABASE";
+ case IPW_FW_ERROR_ALLOC_FAIL:
+ return "ERROR_ALLOC_FAIL";
+ case IPW_FW_ERROR_DMA_UNDERRUN:
+ return "ERROR_DMA_UNDERRUN";
+ case IPW_FW_ERROR_DMA_STATUS:
+ return "ERROR_DMA_STATUS";
+ case IPW_FW_ERROR_DINOSTATUS_ERROR:
+ return "ERROR_DINOSTATUS_ERROR";
+ case IPW_FW_ERROR_EEPROMSTATUS_ERROR:
+ return "ERROR_EEPROMSTATUS_ERROR";
+ case IPW_FW_ERROR_SYSASSERT:
+ return "ERROR_SYSASSERT";
+ case IPW_FW_ERROR_FATAL_ERROR:
+ return "ERROR_FATALSTATUS_ERROR";
+ default:
+ return "UNKNOWNSTATUS_ERROR";
+ }
+}
+
+static void ipw_dump_nic_error_log(struct ipw_priv *priv)
+{
+ u32 desc, time, blink1, blink2, ilink1, ilink2, idata, i, count, base;
+
+ base = ipw_read32(priv, IPWSTATUS_ERROR_LOG);
+ count = ipw_read_reg32(priv, base);
+
+ if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+ IPW_ERROR("Start IPW Error Log Dump:\n");
+ IPW_ERROR("Status: 0x%08X, Config: %08X\n",
+ priv->status, priv->config);
+ }
+
+ for (i = ERROR_START_OFFSET;
+ i <= count * ERROR_ELEM_SIZE;
+ i += ERROR_ELEM_SIZE) {
+ desc = ipw_read_reg32(priv, base + i);
+ time = ipw_read_reg32(priv, base + i + 1*sizeof(u32));
+ blink1 = ipw_read_reg32(priv, base + i + 2*sizeof(u32));
+ blink2 = ipw_read_reg32(priv, base + i + 3*sizeof(u32));
+ ilink1 = ipw_read_reg32(priv, base + i + 4*sizeof(u32));
+ ilink2 = ipw_read_reg32(priv, base + i + 5*sizeof(u32));
+ idata = ipw_read_reg32(priv, base + i + 6*sizeof(u32));
+
+ IPW_ERROR(
+ "%s %i 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ ipw_error_desc(desc), time, blink1, blink2,
+ ilink1, ilink2, idata);
+ }
+}
+
+static void ipw_dump_nic_event_log(struct ipw_priv *priv)
+{
+ u32 ev, time, data, i, count, base;
+
+ base = ipw_read32(priv, IPW_EVENT_LOG);
+ count = ipw_read_reg32(priv, base);
+
+ if (EVENT_START_OFFSET <= count * EVENT_ELEM_SIZE)
+ IPW_ERROR("Start IPW Event Log Dump:\n");
+
+ for (i = EVENT_START_OFFSET;
+ i <= count * EVENT_ELEM_SIZE;
+ i += EVENT_ELEM_SIZE) {
+ ev = ipw_read_reg32(priv, base + i);
+ time = ipw_read_reg32(priv, base + i + 1*sizeof(u32));
+ data = ipw_read_reg32(priv, base + i + 2*sizeof(u32));
+
+#ifdef CONFIG_IPW_DEBUG
+ IPW_ERROR("%i\t0x%08x\t%i\n", time, data, ev);
+#endif
+ }
+}
+
+static int ipw_get_ordinal(struct ipw_priv *priv, u32 ord, void *val,
+ u32 *len)
+{
+ u32 addr, field_info, field_len, field_count, total_len;
+
+ IPW_DEBUG_ORD("ordinal = %i\n", ord);
+
+ if (!priv || !val || !len) {
+ IPW_DEBUG_ORD("Invalid argument\n");
+ return -EINVAL;
+ }
+
+ /* verify device ordinal tables have been initialized */
+ if (!priv->table0_addr || !priv->table1_addr || !priv->table2_addr) {
+ IPW_DEBUG_ORD("Access ordinals before initialization\n");
+ return -EINVAL;
+ }
+
+ switch (IPW_ORD_TABLE_ID_MASK & ord) {
+ case IPW_ORD_TABLE_0_MASK:
+ /*
+ * TABLE 0: Direct access to a table of 32 bit values
+ *
+ * This is a very simple table with the data directly
+ * read from the table
+ */
+
+ /* remove the table id from the ordinal */
+ ord &= IPW_ORD_TABLE_VALUE_MASK;
+
+ /* boundary check */
+ if (ord > priv->table0_len) {
+ IPW_DEBUG_ORD("ordinal value (%i) longer then "
+ "max (%i)\n", ord, priv->table0_len);
+ return -EINVAL;
+ }
+
+ /* verify we have enough room to store the value */
+ if (*len < sizeof(u32)) {
+ IPW_DEBUG_ORD("ordinal buffer length too small, "
+ "need %d\n", sizeof(u32));
+ return -EINVAL;
+ }
+
+ IPW_DEBUG_ORD("Reading TABLE0[%i] from offset 0x%08x\n",
+ ord, priv->table0_addr + (ord << 2));
+
+ *len = sizeof(u32);
+ ord <<= 2;
+ *((u32 *)val) = ipw_read32(priv, priv->table0_addr + ord);
+ break;
+
+ case IPW_ORD_TABLE_1_MASK:
+ /*
+ * TABLE 1: Indirect access to a table of 32 bit values
+ *
+ * This is a fairly large table of u32 values each
+ * representing starting addr for the data (which is
+ * also a u32)
+ */
+
+ /* remove the table id from the ordinal */
+ ord &= IPW_ORD_TABLE_VALUE_MASK;
+
+ /* boundary check */
+ if (ord > priv->table1_len) {
+ IPW_DEBUG_ORD("ordinal value too long\n");
+ return -EINVAL;
+ }
+
+ /* verify we have enough room to store the value */
+ if (*len < sizeof(u32)) {
+ IPW_DEBUG_ORD("ordinal buffer length too small, "
+ "need %d\n", sizeof(u32));
+ return -EINVAL;
+ }
+
+ *((u32 *)val) = ipw_read_reg32(priv, (priv->table1_addr + (ord << 2)));
+ *len = sizeof(u32);
+ break;
+
+ case IPW_ORD_TABLE_2_MASK:
+ /*
+ * TABLE 2: Indirect access to a table of variable sized values
+ *
+ * This table consist of six values, each containing
+ * - dword containing the starting offset of the data
+ * - dword containing the lengh in the first 16bits
+ * and the count in the second 16bits
+ */
+
+ /* remove the table id from the ordinal */
+ ord &= IPW_ORD_TABLE_VALUE_MASK;
+
+ /* boundary check */
+ if (ord > priv->table2_len) {
+ IPW_DEBUG_ORD("ordinal value too long\n");
+ return -EINVAL;
+ }
+
+ /* get the address of statistic */
+ addr = ipw_read_reg32(priv, priv->table2_addr + (ord << 3));
+
+ /* get the second DW of statistics ;
+ * two 16-bit words - first is length, second is count */
+ field_info = ipw_read_reg32(priv, priv->table2_addr + (ord << 3) + sizeof(u32));
+
+ /* get each entry length */
+ field_len = *((u16 *)&field_info);
+
+ /* get number of entries */
+ field_count = *(((u16 *)&field_info) + 1);
+
+ /* abort if not enought memory */
+ total_len = field_len * field_count;
+ if (total_len > *len) {
+ *len = total_len;
+ return -EINVAL;
+ }
+
+ *len = total_len;
+ if (!total_len)
+ return 0;
+
+ IPW_DEBUG_ORD("addr = 0x%08x, total_len = %i, "
+ "field_info = 0x%08x\n",
+ addr, total_len, field_info);
+ ipw_read_indirect(priv, addr, val, total_len);
+ break;
+
+ default:
+ IPW_DEBUG_ORD("Invalid ordinal!\n");
+ return -EINVAL;
+
+ }
+
+
+ return 0;
+}
+
+static void ipw_init_ordinals(struct ipw_priv *priv)
+{
+ priv->table0_addr = IPW_ORDINALS_TABLE_LOWER;
+ priv->table0_len = ipw_read32(priv, priv->table0_addr);
+
+ IPW_DEBUG_ORD("table 0 offset at 0x%08x, len = %i\n",
+ priv->table0_addr, priv->table0_len);
+
+ priv->table1_addr = ipw_read32(priv, IPW_ORDINALS_TABLE_1);
+ priv->table1_len = ipw_read_reg32(priv, priv->table1_addr);
+
+ IPW_DEBUG_ORD("table 1 offset at 0x%08x, len = %i\n",
+ priv->table1_addr, priv->table1_len);
+
+ priv->table2_addr = ipw_read32(priv, IPW_ORDINALS_TABLE_2);
+ priv->table2_len = ipw_read_reg32(priv, priv->table2_addr);
+ priv->table2_len &= 0x0000ffff; /* use first two bytes */
+
+ IPW_DEBUG_ORD("table 2 offset at 0x%08x, len = %i\n",
+ priv->table2_addr, priv->table2_len);
+
+}
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/)
+ * used for controling the debug level.
+ *
+ * See the level definitions in ipw for details.
+ */
+static ssize_t show_debug_level(struct device_driver *d, char *buf)
+{
+ return sprintf(buf, "0x%08X\n", ipw_debug_level);
+}
+static ssize_t store_debug_level(struct device_driver *d, const char *buf,
+ size_t count)
+{
+ char *p = (char *)buf;
+ u32 val;
+
+ if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
+ p++;
+ if (p[0] == 'x' || p[0] == 'X')
+ p++;
+ val = simple_strtoul(p, &p, 16);
+ } else
+ val = simple_strtoul(p, &p, 10);
+ if (p == buf)
+ printk(KERN_INFO DRV_NAME
+ ": %s is not in hex or decimal form.\n", buf);
+ else
+ ipw_debug_level = val;
+
+ return strnlen(buf, count);
+}
+
+static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO,
+ show_debug_level, store_debug_level);
+
+static ssize_t show_status(struct device *d, char *buf)
+{
+ struct ipw_priv *p = (struct ipw_priv *)d->driver_data;
+ return sprintf(buf, "0x%08x\n", (int)p->status);
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
+static ssize_t show_cfg(struct device *d, char *buf)
+{
+ struct ipw_priv *p = (struct ipw_priv *)d->driver_data;
+ return sprintf(buf, "0x%08x\n", (int)p->config);
+}
+static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
+
+static ssize_t show_nic_type(struct device *d, char *buf)
+{
+ struct ipw_priv *p = (struct ipw_priv *)d->driver_data;
+ u8 type = p->eeprom[EEPROM_NIC_TYPE];
+
+ switch (type) {
+ case EEPROM_NIC_TYPE_STANDARD:
+ return sprintf(buf, "STANDARD\n");
+ case EEPROM_NIC_TYPE_DELL:
+ return sprintf(buf, "DELL\n");
+ case EEPROM_NIC_TYPE_FUJITSU:
+ return sprintf(buf, "FUJITSU\n");
+ case EEPROM_NIC_TYPE_IBM:
+ return sprintf(buf, "IBM\n");
+ case EEPROM_NIC_TYPE_HP:
+ return sprintf(buf, "HP\n");
+ }
+
+ return sprintf(buf, "UNKNOWN\n");
+}
+static DEVICE_ATTR(nic_type, S_IRUGO, show_nic_type, NULL);
+
+static ssize_t dump_error_log(struct device *d, const char *buf,
+ size_t count)
+{
+ char *p = (char *)buf;
+
+ if (p[0] == '1')
+ ipw_dump_nic_error_log((struct ipw_priv*)d->driver_data);
+
+ return strnlen(buf, count);
+}
+static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
+
+static ssize_t dump_event_log(struct device *d, const char *buf,
+ size_t count)
+{
+ char *p = (char *)buf;
+
+ if (p[0] == '1')
+ ipw_dump_nic_event_log((struct ipw_priv*)d->driver_data);
+
+ return strnlen(buf, count);
+}
+static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log);
+
+static ssize_t show_ucode_version(struct device *d, char *buf)
+{
+ u32 len = sizeof(u32), tmp = 0;
+ struct ipw_priv *p = (struct ipw_priv*)d->driver_data;
+
+ if(ipw_get_ordinal(p, IPW_ORD_STAT_UCODE_VERSION, &tmp, &len))
+ return 0;
+
+ return sprintf(buf, "0x%08x\n", tmp);
+}
+static DEVICE_ATTR(ucode_version, S_IWUSR|S_IRUGO, show_ucode_version, NULL);
+
+static ssize_t show_rtc(struct device *d, char *buf)
+{
+ u32 len = sizeof(u32), tmp = 0;
+ struct ipw_priv *p = (struct ipw_priv*)d->driver_data;
+
+ if(ipw_get_ordinal(p, IPW_ORD_STAT_RTC, &tmp, &len))
+ return 0;
+
+ return sprintf(buf, "0x%08x\n", tmp);
+}
+static DEVICE_ATTR(rtc, S_IWUSR|S_IRUGO, show_rtc, NULL);
+
+/*
+ * Add a device attribute to view/control the delay between eeprom
+ * operations.
+ */
+static ssize_t show_eeprom_delay(struct device *d, char *buf)
+{
+ int n = ((struct ipw_priv*)d->driver_data)->eeprom_delay;
+ return sprintf(buf, "%i\n", n);
+}
+static ssize_t store_eeprom_delay(struct device *d, const char *buf,
+ size_t count)
+{
+ struct ipw_priv *p = (struct ipw_priv*)d->driver_data;
+ sscanf(buf, "%i", &p->eeprom_delay);
+ return strnlen(buf, count);
+}
+static DEVICE_ATTR(eeprom_delay, S_IWUSR|S_IRUGO,
+ show_eeprom_delay,store_eeprom_delay);
+
+static ssize_t show_command_event_reg(struct device *d, char *buf)
+{
+ u32 reg = 0;
+ struct ipw_priv *p = (struct ipw_priv *)d->driver_data;
+
+ reg = ipw_read_reg32(p, CX2_INTERNAL_CMD_EVENT);
+ return sprintf(buf, "0x%08x\n", reg);
+}
+static ssize_t store_command_event_reg(struct device *d,
+ const char *buf,
+ size_t count)
+{
+ u32 reg;
+ struct ipw_priv *p = (struct ipw_priv *)d->driver_data;
+
+ sscanf(buf, "%x", ®);
+ ipw_write_reg32(p, CX2_INTERNAL_CMD_EVENT, reg);
+ return strnlen(buf, count);
+}
+static DEVICE_ATTR(command_event_reg, S_IWUSR|S_IRUGO,
+ show_command_event_reg,store_command_event_reg);
+
+static ssize_t show_mem_gpio_reg(struct device *d, char *buf)
+{
+ u32 reg = 0;
+ struct ipw_priv *p = (struct ipw_priv *)d->driver_data;
+
+ reg = ipw_read_reg32(p, 0x301100);
+ return sprintf(buf, "0x%08x\n", reg);
+}
+static ssize_t store_mem_gpio_reg(struct device *d,
+ const char *buf,
+ size_t count)
+{
+ u32 reg;
+ struct ipw_priv *p = (struct ipw_priv *)d->driver_data;
+
+ sscanf(buf, "%x", ®);
+ ipw_write_reg32(p, 0x301100, reg);
+ return strnlen(buf, count);
+}
+static DEVICE_ATTR(mem_gpio_reg, S_IWUSR|S_IRUGO,
+ show_mem_gpio_reg,store_mem_gpio_reg);
+
+static ssize_t show_indirect_dword(struct device *d, char *buf)
+{
+ u32 reg = 0;
+ struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+ if (priv->status & STATUS_INDIRECT_DWORD)
+ reg = ipw_read_reg32(priv, priv->indirect_dword);
+ else
+ reg = 0;
+
+ return sprintf(buf, "0x%08x\n", reg);
+}
+static ssize_t store_indirect_dword(struct device *d,
+ const char *buf,
+ size_t count)
+{
+ struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+
+ sscanf(buf, "%x", &priv->indirect_dword);
+ priv->status |= STATUS_INDIRECT_DWORD;
+ return strnlen(buf, count);
+}
+static DEVICE_ATTR(indirect_dword, S_IWUSR|S_IRUGO,
+ show_indirect_dword,store_indirect_dword);
+
+static ssize_t show_indirect_byte(struct device *d, char *buf)
+{
+ u8 reg = 0;
+ struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+ if (priv->status & STATUS_INDIRECT_BYTE)
+ reg = ipw_read_reg8(priv, priv->indirect_byte);
+ else
+ reg = 0;
+
+ return sprintf(buf, "0x%02x\n", reg);
+}
+static ssize_t store_indirect_byte(struct device *d,
+ const char *buf,
+ size_t count)
+{
+ struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+
+ sscanf(buf, "%x", &priv->indirect_byte);
+ priv->status |= STATUS_INDIRECT_BYTE;
+ return strnlen(buf, count);
+}
+static DEVICE_ATTR(indirect_byte, S_IWUSR|S_IRUGO,
+ show_indirect_byte, store_indirect_byte);
+
+static ssize_t show_direct_dword(struct device *d, char *buf)
+{
+ u32 reg = 0;
+ struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+
+ if (priv->status & STATUS_DIRECT_DWORD)
+ reg = ipw_read32(priv, priv->direct_dword);
+ else
+ reg = 0;
+
+ return sprintf(buf, "0x%08x\n", reg);
+}
+static ssize_t store_direct_dword(struct device *d,
+ const char *buf,
+ size_t count)
+{
+ struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+
+ sscanf(buf, "%x", &priv->direct_dword);
+ priv->status |= STATUS_DIRECT_DWORD;
+ return strnlen(buf, count);
+}
+static DEVICE_ATTR(direct_dword, S_IWUSR|S_IRUGO,
+ show_direct_dword,store_direct_dword);
+
+
+static inline int rf_kill_active(struct ipw_priv *priv)
+{
+ if (0 == (ipw_read32(priv, 0x30) & 0x10000))
+ priv->status |= STATUS_RF_KILL_HW;
+ else
+ priv->status &= ~STATUS_RF_KILL_HW;
+
+ return (priv->status & STATUS_RF_KILL_HW) ? 1 : 0;
+}
+
+static ssize_t show_rf_kill(struct device *d, char *buf)
+{
+ /* 0 - RF kill not enabled
+ 1 - SW based RF kill active (sysfs)
+ 2 - HW based RF kill active
+ 3 - Both HW and SW baed RF kill active */
+ struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+ int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
+ (rf_kill_active(priv) ? 0x2 : 0x0);
+ return sprintf(buf, "%i\n", val);
+}
+
+static int ipw_radio_kill_sw(struct ipw_priv *priv, int disable_radio)
+{
+ if ((disable_radio ? 1 : 0) ==
+ (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
+ return 0 ;
+
+ IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
+ disable_radio ? "OFF" : "ON");
+
+ if (disable_radio) {
+ priv->status |= STATUS_RF_KILL_SW;
+
+ if (priv->workqueue) {
+ cancel_delayed_work(&priv->request_scan);
+ }
+ wake_up_interruptible(&priv->wait_command_queue);
+ queue_work(priv->workqueue, &priv->down);
+ } else {
+ priv->status &= ~STATUS_RF_KILL_SW;
+ if (rf_kill_active(priv)) {
+ IPW_DEBUG_RF_KILL("Can not turn radio back on - "
+ "disabled by HW switch\n");
+ /* Make sure the RF_KILL check timer is running */
+ cancel_delayed_work(&priv->rf_kill);
+ queue_delayed_work(priv->workqueue, &priv->rf_kill,
+ 2 * HZ);
+ } else
+ queue_work(priv->workqueue, &priv->up);
+ }
+
+ return 1;
+}
+
+static ssize_t store_rf_kill(struct device *d, const char *buf, size_t count)
+{
+ struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+
+ ipw_radio_kill_sw(priv, buf[0] == '1');
+
+ return count;
+}
+static DEVICE_ATTR(rf_kill, S_IWUSR|S_IRUGO, show_rf_kill, store_rf_kill);
+
+static void ipw_irq_tasklet(struct ipw_priv *priv)
+{
+ u32 inta, inta_mask, handled = 0;
+ unsigned long flags;
+ int rc = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ inta = ipw_read32(priv, CX2_INTA_RW);
+ inta_mask = ipw_read32(priv, CX2_INTA_MASK_R);
+ inta &= (CX2_INTA_MASK_ALL & inta_mask);
+
+ /* Add any cached INTA values that need to be handled */
+ inta |= priv->isr_inta;
+
+ /* handle all the justifications for the interrupt */
+ if (inta & CX2_INTA_BIT_RX_TRANSFER) {
+ ipw_rx(priv);
+ handled |= CX2_INTA_BIT_RX_TRANSFER;
+ }
+
+ if (inta & CX2_INTA_BIT_TX_CMD_QUEUE) {
+ IPW_DEBUG_HC("Command completed.\n");
+ rc = ipw_queue_tx_reclaim( priv, &priv->txq_cmd, -1);
+ priv->status &= ~STATUS_HCMD_ACTIVE;
+ wake_up_interruptible(&priv->wait_command_queue);
+ handled |= CX2_INTA_BIT_TX_CMD_QUEUE;
+ }
+
+ if (inta & CX2_INTA_BIT_TX_QUEUE_1) {
+ IPW_DEBUG_TX("TX_QUEUE_1\n");
+ rc = ipw_queue_tx_reclaim( priv, &priv->txq[0], 0);
+ handled |= CX2_INTA_BIT_TX_QUEUE_1;
+ }
+
+ if (inta & CX2_INTA_BIT_TX_QUEUE_2) {
+ IPW_DEBUG_TX("TX_QUEUE_2\n");
+ rc = ipw_queue_tx_reclaim( priv, &priv->txq[1], 1);
+ handled |= CX2_INTA_BIT_TX_QUEUE_2;
+ }
+
+ if (inta & CX2_INTA_BIT_TX_QUEUE_3) {
+ IPW_DEBUG_TX("TX_QUEUE_3\n");
+ rc = ipw_queue_tx_reclaim( priv, &priv->txq[2], 2);
+ handled |= CX2_INTA_BIT_TX_QUEUE_3;
+ }
+
+ if (inta & CX2_INTA_BIT_TX_QUEUE_4) {
+ IPW_DEBUG_TX("TX_QUEUE_4\n");
+ rc = ipw_queue_tx_reclaim( priv, &priv->txq[3], 3);
+ handled |= CX2_INTA_BIT_TX_QUEUE_4;
+ }
+
+ if (inta & CX2_INTA_BIT_STATUS_CHANGE) {
+ IPW_WARNING("STATUS_CHANGE\n");
+ handled |= CX2_INTA_BIT_STATUS_CHANGE;
+ }
+
+ if (inta & CX2_INTA_BIT_BEACON_PERIOD_EXPIRED) {
+ IPW_WARNING("TX_PERIOD_EXPIRED\n");
+ handled |= CX2_INTA_BIT_BEACON_PERIOD_EXPIRED;
+ }
+
+ if (inta & CX2_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE) {
+ IPW_WARNING("HOST_CMD_DONE\n");
+ handled |= CX2_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE;
+ }
+
+ if (inta & CX2_INTA_BIT_FW_INITIALIZATION_DONE) {
+ IPW_WARNING("FW_INITIALIZATION_DONE\n");
+ handled |= CX2_INTA_BIT_FW_INITIALIZATION_DONE;
+ }
+
+ if (inta & CX2_INTA_BIT_FW_CARD_DISABLE_PHY_OFF_DONE) {
+ IPW_WARNING("PHY_OFF_DONE\n");
+ handled |= CX2_INTA_BIT_FW_CARD_DISABLE_PHY_OFF_DONE;
+ }
+
+ if (inta & CX2_INTA_BIT_RF_KILL_DONE) {
+ IPW_DEBUG_RF_KILL("RF_KILL_DONE\n");
+ priv->status |= STATUS_RF_KILL_HW;
+ wake_up_interruptible(&priv->wait_command_queue);
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+ cancel_delayed_work(&priv->request_scan);
+ queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ);
+ handled |= CX2_INTA_BIT_RF_KILL_DONE;
+ }
+
+ if (inta & CX2_INTA_BIT_FATAL_ERROR) {
+ IPW_ERROR("Firmware error detected. Restarting.\n");
+#ifdef CONFIG_IPW_DEBUG
+ if (ipw_debug_level & IPW_DL_FW_ERRORS) {
+ ipw_dump_nic_error_log(priv);
+ ipw_dump_nic_event_log(priv);
+ }
+#endif
+ queue_work(priv->workqueue, &priv->adapter_restart);
+ handled |= CX2_INTA_BIT_FATAL_ERROR;
+ }
+
+ if (inta & CX2_INTA_BIT_PARITY_ERROR) {
+ IPW_ERROR("Parity error\n");
+ handled |= CX2_INTA_BIT_PARITY_ERROR;
+ }
+
+ if (handled != inta) {
+ IPW_ERROR("Unhandled INTA bits 0x%08x\n",
+ inta & ~handled);
+ }
+
+ /* enable all interrupts */
+ ipw_enable_interrupts(priv);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+#ifdef CONFIG_IPW_DEBUG
+#define IPW_CMD(x) case IPW_CMD_ ## x : return #x
+static char *get_cmd_string(u8 cmd)
+{
+ switch (cmd) {
+ IPW_CMD(HOST_COMPLETE);
+ IPW_CMD(POWER_DOWN);
+ IPW_CMD(SYSTEM_CONFIG);
+ IPW_CMD(MULTICAST_ADDRESS);
+ IPW_CMD(SSID);
+ IPW_CMD(ADAPTER_ADDRESS);
+ IPW_CMD(PORT_TYPE);
+ IPW_CMD(RTS_THRESHOLD);
+ IPW_CMD(FRAG_THRESHOLD);
+ IPW_CMD(POWER_MODE);
+ IPW_CMD(WEP_KEY);
+ IPW_CMD(TGI_TX_KEY);
+ IPW_CMD(SCAN_REQUEST);
+ IPW_CMD(SCAN_REQUEST_EXT);
+ IPW_CMD(ASSOCIATE);
+ IPW_CMD(SUPPORTED_RATES);
+ IPW_CMD(SCAN_ABORT);
+ IPW_CMD(TX_FLUSH);
+ IPW_CMD(QOS_PARAMETERS);
+ IPW_CMD(DINO_CONFIG);
+ IPW_CMD(RSN_CAPABILITIES);
+ IPW_CMD(RX_KEY);
+ IPW_CMD(CARD_DISABLE);
+ IPW_CMD(SEED_NUMBER);
+ IPW_CMD(TX_POWER);
+ IPW_CMD(COUNTRY_INFO);
+ IPW_CMD(AIRONET_INFO);
+ IPW_CMD(AP_TX_POWER);
+ IPW_CMD(CCKM_INFO);
+ IPW_CMD(CCX_VER_INFO);
+ IPW_CMD(SET_CALIBRATION);
+ IPW_CMD(SENSITIVITY_CALIB);
+ IPW_CMD(RETRY_LIMIT);
+ IPW_CMD(IPW_PRE_POWER_DOWN);
+ IPW_CMD(VAP_BEACON_TEMPLATE);
+ IPW_CMD(VAP_DTIM_PERIOD);
+ IPW_CMD(EXT_SUPPORTED_RATES);
+ IPW_CMD(VAP_LOCAL_TX_PWR_CONSTRAINT);
+ IPW_CMD(VAP_QUIET_INTERVALS);
+ IPW_CMD(VAP_CHANNEL_SWITCH);
+ IPW_CMD(VAP_MANDATORY_CHANNELS);
+ IPW_CMD(VAP_CELL_PWR_LIMIT);
+ IPW_CMD(VAP_CF_PARAM_SET);
+ IPW_CMD(VAP_SET_BEACONING_STATE);
+ IPW_CMD(MEASUREMENT);
+ IPW_CMD(POWER_CAPABILITY);
+ IPW_CMD(SUPPORTED_CHANNELS);
+ IPW_CMD(TPC_REPORT);
+ IPW_CMD(WME_INFO);
+ IPW_CMD(PRODUCTION_COMMAND);
+ default:
+ return "UNKNOWN";
+ }
+}
+#endif /* CONFIG_IPW_DEBUG */
+
+#define HOST_COMPLETE_TIMEOUT HZ
+static int ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd)
+{
+ int rc = 0;
+
+ if (priv->status & STATUS_HCMD_ACTIVE) {
+ IPW_ERROR("Already sending a command\n");
+ return -1;
+ }
+
+ priv->status |= STATUS_HCMD_ACTIVE;
+
+ IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
+ get_cmd_string(cmd->cmd), cmd->cmd, cmd->len);
+ printk_buf(IPW_DL_HOST_COMMAND, (u8*)cmd->param, cmd->len);
+
+ rc = ipw_queue_tx_hcmd(priv, cmd->cmd, &cmd->param, cmd->len, 0);
+ if (rc)
+ return rc;
+
+ rc = wait_event_interruptible_timeout(
+ priv->wait_command_queue, !(priv->status & STATUS_HCMD_ACTIVE),
+ HOST_COMPLETE_TIMEOUT);
+ if (rc == 0) {
+ IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
+ HOST_COMPLETE_TIMEOUT / (HZ / 1000));
+ priv->status &= ~STATUS_HCMD_ACTIVE;
+ return -EIO;
+ }
+ if (priv->status & STATUS_RF_KILL_MASK) {
+ IPW_DEBUG_INFO("Command aborted due to RF Kill Switch\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int ipw_send_host_complete(struct ipw_priv *priv)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_HOST_COMPLETE,
+ .len = 0
+ };
+
+ if (!priv) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send HOST_COMPLETE command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_send_system_config(struct ipw_priv *priv,
+ struct ipw_sys_config *config)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_SYSTEM_CONFIG,
+ .len = sizeof(*config)
+ };
+
+ if (!priv || !config) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ memcpy(&cmd.param,config,sizeof(*config));
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send SYSTEM_CONFIG command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_send_ssid(struct ipw_priv *priv, u8 *ssid, int len)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_SSID,
+ .len = min(len, IW_ESSID_MAX_SIZE)
+ };
+
+ if (!priv || !ssid) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ memcpy(&cmd.param, ssid, cmd.len);
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send SSID command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_send_adapter_address(struct ipw_priv *priv, u8 *mac)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_ADAPTER_ADDRESS,
+ .len = ETH_ALEN
+ };
+
+ if (!priv || !mac) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ IPW_DEBUG_INFO("%s: Setting MAC to " MAC_FMT "\n",
+ priv->net_dev->name, MAC_ARG(mac));
+
+ memcpy(&cmd.param, mac, ETH_ALEN);
+
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send ADAPTER_ADDRESS command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void ipw_adapter_restart(void *adapter)
+{
+ struct ipw_priv *priv = adapter;
+
+ if (priv->status & STATUS_RF_KILL_MASK)
+ return;
+
+ ipw_down(priv);
+ if (ipw_up(priv)) {
+ IPW_ERROR("Failed to up device\n");
+ return;
+ }
+}
+
+
+
+
+#define IPW_SCAN_CHECK_WATCHDOG (5 * HZ)
+
+static void ipw_scan_check(void *data)
+{
+ struct ipw_priv *priv = data;
+ if (priv->status & (STATUS_SCANNING | STATUS_SCAN_ABORTING)) {
+ IPW_DEBUG_SCAN("Scan completion watchdog resetting "
+ "adapter (%dms).\n",
+ IPW_SCAN_CHECK_WATCHDOG / 100);
+ ipw_adapter_restart(priv);
+ }
+}
+
+static int ipw_send_scan_request_ext(struct ipw_priv *priv,
+ struct ipw_scan_request_ext *request)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_SCAN_REQUEST_EXT,
+ .len = sizeof(*request)
+ };
+
+ if (!priv || !request) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ memcpy(&cmd.param,request,sizeof(*request));
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send SCAN_REQUEST_EXT command\n");
+ return -1;
+ }
+
+ queue_delayed_work(priv->workqueue, &priv->scan_check,
+ IPW_SCAN_CHECK_WATCHDOG);
+ return 0;
+}
+
+static int ipw_send_scan_abort(struct ipw_priv *priv)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_SCAN_ABORT,
+ .len = 0
+ };
+
+ if (!priv) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send SCAN_ABORT command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_set_sensitivity(struct ipw_priv *priv, u16 sens)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_SENSITIVITY_CALIB,
+ .len = sizeof(struct ipw_sensitivity_calib)
+ };
+ struct ipw_sensitivity_calib *calib = (struct ipw_sensitivity_calib *)
+ &cmd.param;
+ calib->beacon_rssi_raw = sens;
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send SENSITIVITY CALIB command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_send_associate(struct ipw_priv *priv,
+ struct ipw_associate *associate)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_ASSOCIATE,
+ .len = sizeof(*associate)
+ };
+
+ if (!priv || !associate) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ memcpy(&cmd.param,associate,sizeof(*associate));
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send ASSOCIATE command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_send_supported_rates(struct ipw_priv *priv,
+ struct ipw_supported_rates *rates)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_SUPPORTED_RATES,
+ .len = sizeof(*rates)
+ };
+
+ if (!priv || !rates) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ memcpy(&cmd.param,rates,sizeof(*rates));
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send SUPPORTED_RATES command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_set_random_seed(struct ipw_priv *priv)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_SEED_NUMBER,
+ .len = sizeof(u32)
+ };
+
+ if (!priv) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ get_random_bytes(&cmd.param, sizeof(u32));
+
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send SEED_NUMBER command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+#if 0
+static int ipw_send_card_disable(struct ipw_priv *priv, u32 phy_off)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_CARD_DISABLE,
+ .len = sizeof(u32)
+ };
+
+ if (!priv) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ *((u32*)&cmd.param) = phy_off;
+
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send CARD_DISABLE command\n");
+ return -1;
+ }
+
+ return 0;
+}
+#endif
+
+static int ipw_send_tx_power(struct ipw_priv *priv,
+ struct ipw_tx_power *power)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_TX_POWER,
+ .len = sizeof(*power)
+ };
+
+ if (!priv || !power) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ memcpy(&cmd.param,power,sizeof(*power));
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send TX_POWER command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_send_rts_threshold(struct ipw_priv *priv, u16 rts)
+{
+ struct ipw_rts_threshold rts_threshold = {
+ .rts_threshold = rts,
+ };
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_RTS_THRESHOLD,
+ .len = sizeof(rts_threshold)
+ };
+
+ if (!priv) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ memcpy(&cmd.param, &rts_threshold, sizeof(rts_threshold));
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send RTS_THRESHOLD command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_send_frag_threshold(struct ipw_priv *priv, u16 frag)
+{
+ struct ipw_frag_threshold frag_threshold = {
+ .frag_threshold = frag,
+ };
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_FRAG_THRESHOLD,
+ .len = sizeof(frag_threshold)
+ };
+
+ if (!priv) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ memcpy(&cmd.param, &frag_threshold, sizeof(frag_threshold));
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send FRAG_THRESHOLD command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ipw_send_power_mode(struct ipw_priv *priv, u32 mode)
+{
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_POWER_MODE,
+ .len = sizeof(u32)
+ };
+ u32 *param = (u32*)(&cmd.param);
+
+ if (!priv) {
+ IPW_ERROR("Invalid args\n");
+ return -1;
+ }
+
+ /* If on battery, set to 3, if AC set to CAM, else user
+ * level */
+ switch (mode) {
+ case IPW_POWER_BATTERY:
+ *param = IPW_POWER_INDEX_3;
+ break;
+ case IPW_POWER_AC:
+ *param = IPW_POWER_MODE_CAM;
+ break;
+ default:
+ *param = mode;
+ break;
+ }
+
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send POWER_MODE command\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * The IPW device contains a Microwire compatible EEPROM that stores
+ * various data like the MAC address. Usually the firmware has exclusive
+ * access to the eeprom, but during device initialization (before the
+ * device driver has sent the HostComplete command to the firmware) the
+ * device driver has read access to the EEPROM by way of indirect addressing
+ * through a couple of memory mapped registers.
+ *
+ * The following is a simplified implementation for pulling data out of the
+ * the eeprom, along with some helper functions to find information in
+ * the per device private data's copy of the eeprom.
+ *
+ * NOTE: To better understand how these functions work (i.e what is a chip
+ * select and why do have to keep driving the eeprom clock?), read
+ * just about any data sheet for a Microwire compatible EEPROM.
+ */
+
+/* write a 32 bit value into the indirect accessor register */
+static inline void eeprom_write_reg(struct ipw_priv *p, u32 data)
+{
+ ipw_write_reg32(p, FW_MEM_REG_EEPROM_ACCESS, data);
+
+ /* the eeprom requires some time to complete the operation */
+ udelay(p->eeprom_delay);
+
+ return;
+}
+
+/* perform a chip select operation */
+static inline void eeprom_cs(struct ipw_priv* priv)
+{
+ eeprom_write_reg(priv,0);
+ eeprom_write_reg(priv,EEPROM_BIT_CS);
+ eeprom_write_reg(priv,EEPROM_BIT_CS|EEPROM_BIT_SK);
+ eeprom_write_reg(priv,EEPROM_BIT_CS);
+}
+
+/* perform a chip select operation */
+static inline void eeprom_disable_cs(struct ipw_priv* priv)
+{
+ eeprom_write_reg(priv,EEPROM_BIT_CS);
+ eeprom_write_reg(priv,0);
+ eeprom_write_reg(priv,EEPROM_BIT_SK);
+}
+
+/* push a single bit down to the eeprom */
+static inline void eeprom_write_bit(struct ipw_priv *p,u8 bit)
+{
+ int d = ( bit ? EEPROM_BIT_DI : 0);
+ eeprom_write_reg(p,EEPROM_BIT_CS|d);
+ eeprom_write_reg(p,EEPROM_BIT_CS|d|EEPROM_BIT_SK);
+}
+
+/* push an opcode followed by an address down to the eeprom */
+static void eeprom_op(struct ipw_priv* priv, u8 op, u8 addr)
+{
+ int i;
+
+ eeprom_cs(priv);
+ eeprom_write_bit(priv,1);
+ eeprom_write_bit(priv,op&2);
+ eeprom_write_bit(priv,op&1);
+ for ( i=7; i>=0; i-- ) {
+ eeprom_write_bit(priv,addr&(1<<i));
+ }
+}
+
+/* pull 16 bits off the eeprom, one bit at a time */
+static u16 eeprom_read_u16(struct ipw_priv* priv, u8 addr)
+{
+ int i;
+ u16 r=0;
+
+ /* Send READ Opcode */
+ eeprom_op(priv,EEPROM_CMD_READ,addr);
+
+ /* Send dummy bit */
+ eeprom_write_reg(priv,EEPROM_BIT_CS);
+
+ /* Read the byte off the eeprom one bit at a time */
+ for ( i=0; i<16; i++ ) {
+ u32 data = 0;
+ eeprom_write_reg(priv,EEPROM_BIT_CS|EEPROM_BIT_SK);
+ eeprom_write_reg(priv,EEPROM_BIT_CS);
+ data = ipw_read_reg32(priv,FW_MEM_REG_EEPROM_ACCESS);
+ r = (r<<1) | ((data & EEPROM_BIT_DO)?1:0);
+ }
+
+ /* Send another dummy bit */
+ eeprom_write_reg(priv,0);
+ eeprom_disable_cs(priv);
+
+ return r;
+}
+
+/* helper function for pulling the mac address out of the private */
+/* data's copy of the eeprom data */
+static void eeprom_parse_mac(struct ipw_priv* priv, u8* mac)
+{
+ u8* ee = (u8*)priv->eeprom;
+ memcpy(mac, &ee[EEPROM_MAC_ADDRESS], 6);
+}
+
+/*
+ * Either the device driver (i.e. the host) or the firmware can
+ * load eeprom data into the designated region in SRAM. If neither
+ * happens then the FW will shutdown with a fatal error.
+ *
+ * In order to signal the FW to load the EEPROM, the EEPROM_LOAD_DISABLE
+ * bit needs region of shared SRAM needs to be non-zero.
+ */
+static void ipw_eeprom_init_sram(struct ipw_priv *priv)
+{
+ int i;
+ u16 *eeprom = (u16 *)priv->eeprom;
+
+ IPW_DEBUG_TRACE(">>\n");
+
+ /* read entire contents of eeprom into private buffer */
+ for ( i=0; i<128; i++ )
+ eeprom[i] = eeprom_read_u16(priv,(u8)i);
+
+ /*
+ If the data looks correct, then copy it to our private
+ copy. Otherwise let the firmware know to perform the operation
+ on it's own
+ */
+ if ((priv->eeprom + EEPROM_VERSION) != 0) {
+ IPW_DEBUG_INFO("Writing EEPROM data into SRAM\n");
+
+ /* write the eeprom data to sram */
+ for( i=0; i<CX2_EEPROM_IMAGE_SIZE; i++ )
+ ipw_write8(priv, IPW_EEPROM_DATA + i,
+ priv->eeprom[i]);
+
+ /* Do not load eeprom data on fatal error or suspend */
+ ipw_write32(priv, IPW_EEPROM_LOAD_DISABLE, 0);
+ } else {
+ IPW_DEBUG_INFO("Enabling FW initializationg of SRAM\n");
+
+ /* Load eeprom data on fatal error or suspend */
+ ipw_write32(priv, IPW_EEPROM_LOAD_DISABLE, 1);
+ }
+
+ IPW_DEBUG_TRACE("<<\n");
+}
+
+
+static inline void ipw_zero_memory(struct ipw_priv *priv, u32 start, u32 count)
+{
+ count >>= 2;
+ if (!count) return;
+ _ipw_write32(priv, CX2_AUTOINC_ADDR, start);
+ while (count--)
+ _ipw_write32(priv, CX2_AUTOINC_DATA, 0);
+}
+
+static inline void ipw_fw_dma_reset_command_blocks(struct ipw_priv *priv)
+{
+ ipw_zero_memory(priv, CX2_SHARED_SRAM_DMA_CONTROL,
+ CB_NUMBER_OF_ELEMENTS_SMALL *
+ sizeof(struct command_block));
+}
+
+static int ipw_fw_dma_enable(struct ipw_priv *priv)
+{ /* start dma engine but no transfers yet*/
+
+ IPW_DEBUG_FW(">> : \n");
+
+ /* Start the dma */
+ ipw_fw_dma_reset_command_blocks(priv);
+
+ /* Write CB base address */
+ ipw_write_reg32(priv, CX2_DMA_I_CB_BASE, CX2_SHARED_SRAM_DMA_CONTROL);
+
+ IPW_DEBUG_FW("<< : \n");
+ return 0;
+}
+
+static void ipw_fw_dma_abort(struct ipw_priv *priv)
+{
+ u32 control = 0;
+
+ IPW_DEBUG_FW(">> :\n");
+
+ //set the Stop and Abort bit
+ control = DMA_CONTROL_SMALL_CB_CONST_VALUE | DMA_CB_STOP_AND_ABORT;
+ ipw_write_reg32(priv, CX2_DMA_I_DMA_CONTROL, control);
+ priv->sram_desc.last_cb_index = 0;
+
+ IPW_DEBUG_FW("<< \n");
+}
+
+static int ipw_fw_dma_write_command_block(struct ipw_priv *priv, int index, struct command_block *cb)
+{
+ u32 address = CX2_SHARED_SRAM_DMA_CONTROL + (sizeof(struct command_block) * index);
+ IPW_DEBUG_FW(">> :\n");
+
+ ipw_write_indirect(priv, address, (u8*)cb, sizeof(struct command_block));
+
+ IPW_DEBUG_FW("<< :\n");
+ return 0;
+
+}
+
+static int ipw_fw_dma_kick(struct ipw_priv *priv)
+{
+ u32 control = 0;
+ u32 index=0;
+
+ IPW_DEBUG_FW(">> :\n");
+
+ for (index = 0; index < priv->sram_desc.last_cb_index; index++)
+ ipw_fw_dma_write_command_block(priv, index, &priv->sram_desc.cb_list[index]);
+
+ /* Enable the DMA in the CSR register */
+ ipw_clear_bit(priv, CX2_RESET_REG,CX2_RESET_REG_MASTER_DISABLED | CX2_RESET_REG_STOP_MASTER);
+
+ /* Set the Start bit. */
+ control = DMA_CONTROL_SMALL_CB_CONST_VALUE | DMA_CB_START;
+ ipw_write_reg32(priv, CX2_DMA_I_DMA_CONTROL, control);
+
+ IPW_DEBUG_FW("<< :\n");
+ return 0;
+}
+
+static void ipw_fw_dma_dump_command_block(struct ipw_priv *priv)
+{
+ u32 address;
+ u32 register_value=0;
+ u32 cb_fields_address=0;
+
+ IPW_DEBUG_FW(">> :\n");
+ address = ipw_read_reg32(priv,CX2_DMA_I_CURRENT_CB);
+ IPW_DEBUG_FW_INFO("Current CB is 0x%x \n",address);
+
+ /* Read the DMA Controlor register */
+ register_value = ipw_read_reg32(priv, CX2_DMA_I_DMA_CONTROL);
+ IPW_DEBUG_FW_INFO("CX2_DMA_I_DMA_CONTROL is 0x%x \n",register_value);
+
+ /* Print the CB values*/
+ cb_fields_address = address;
+ register_value = ipw_read_reg32(priv, cb_fields_address);
+ IPW_DEBUG_FW_INFO("Current CB ControlField is 0x%x \n",register_value);
+
+ cb_fields_address += sizeof(u32);
+ register_value = ipw_read_reg32(priv, cb_fields_address);
+ IPW_DEBUG_FW_INFO("Current CB Source Field is 0x%x \n",register_value);
+
+ cb_fields_address += sizeof(u32);
+ register_value = ipw_read_reg32(priv, cb_fields_address);
+ IPW_DEBUG_FW_INFO("Current CB Destination Field is 0x%x \n",
+ register_value);
+
+ cb_fields_address += sizeof(u32);
+ register_value = ipw_read_reg32(priv, cb_fields_address);
+ IPW_DEBUG_FW_INFO("Current CB Status Field is 0x%x \n",register_value);
+
+ IPW_DEBUG_FW(">> :\n");
+}
+
+static int ipw_fw_dma_command_block_index(struct ipw_priv *priv)
+{
+ u32 current_cb_address = 0;
+ u32 current_cb_index = 0;
+
+ IPW_DEBUG_FW("<< :\n");
+ current_cb_address= ipw_read_reg32(priv, CX2_DMA_I_CURRENT_CB);
+
+ current_cb_index = (current_cb_address - CX2_SHARED_SRAM_DMA_CONTROL )/
+ sizeof (struct command_block);
+
+ IPW_DEBUG_FW_INFO("Current CB index 0x%x address = 0x%X \n",
+ current_cb_index, current_cb_address );
+
+ IPW_DEBUG_FW(">> :\n");
+ return current_cb_index;
+
+}
+
+static int ipw_fw_dma_add_command_block(struct ipw_priv *priv,
+ u32 src_address,
+ u32 dest_address,
+ u32 length,
+ int interrupt_enabled,
+ int is_last)
+{
+
+ u32 control = CB_VALID | CB_SRC_LE | CB_DEST_LE | CB_SRC_AUTOINC |
+ CB_SRC_IO_GATED | CB_DEST_AUTOINC | CB_SRC_SIZE_LONG |
+ CB_DEST_SIZE_LONG;
+ struct command_block *cb;
+ u32 last_cb_element=0;
+
+ IPW_DEBUG_FW_INFO("src_address=0x%x dest_address=0x%x length=0x%x\n",
+ src_address, dest_address, length);
+
+ if (priv->sram_desc.last_cb_index >= CB_NUMBER_OF_ELEMENTS_SMALL)
+ return -1;
+
+ last_cb_element = priv->sram_desc.last_cb_index;
+ cb = &priv->sram_desc.cb_list[last_cb_element];
+ priv->sram_desc.last_cb_index++;
+
+ /* Calculate the new CB control word */
+ if (interrupt_enabled )
+ control |= CB_INT_ENABLED;
+
+ if (is_last)
+ control |= CB_LAST_VALID;
+
+ control |= length;
+
+ /* Calculate the CB Element's checksum value */
+ cb->status = control ^src_address ^dest_address;
+
+ /* Copy the Source and Destination addresses */
+ cb->dest_addr = dest_address;
+ cb->source_addr = src_address;
+
+ /* Copy the Control Word last */
+ cb->control = control;
+
+ return 0;
+}
+
+static int ipw_fw_dma_add_buffer(struct ipw_priv *priv,
+ u32 src_phys,
+ u32 dest_address,
+ u32 length)
+{
+ u32 bytes_left = length;
+ u32 src_offset=0;
+ u32 dest_offset=0;
+ int status = 0;
+ IPW_DEBUG_FW(">> \n");
+ IPW_DEBUG_FW_INFO("src_phys=0x%x dest_address=0x%x length=0x%x\n",
+ src_phys, dest_address, length);
+ while (bytes_left > CB_MAX_LENGTH) {
+ status = ipw_fw_dma_add_command_block( priv,
+ src_phys + src_offset,
+ dest_address + dest_offset,
+ CB_MAX_LENGTH, 0, 0);
+ if (status) {
+ IPW_DEBUG_FW_INFO(": Failed\n");
+ return -1;
+ } else
+ IPW_DEBUG_FW_INFO(": Added new cb\n");
+
+ src_offset += CB_MAX_LENGTH;
+ dest_offset += CB_MAX_LENGTH;
+ bytes_left -= CB_MAX_LENGTH;
+ }
+
+ /* add the buffer tail */
+ if (bytes_left > 0) {
+ status = ipw_fw_dma_add_command_block(
+ priv, src_phys + src_offset,
+ dest_address + dest_offset,
+ bytes_left, 0, 0);
+ if (status) {
+ IPW_DEBUG_FW_INFO(": Failed on the buffer tail\n");
+ return -1;
+ } else
+ IPW_DEBUG_FW_INFO(": Adding new cb - the buffer tail\n");
+ }
+
+
+ IPW_DEBUG_FW("<< \n");
+ return 0;
+}
+
+static int ipw_fw_dma_wait(struct ipw_priv *priv)
+{
+ u32 current_index = 0;
+ u32 watchdog = 0;
+
+ IPW_DEBUG_FW(">> : \n");
+
+ current_index = ipw_fw_dma_command_block_index(priv);
+ IPW_DEBUG_FW_INFO("sram_desc.last_cb_index:0x%8X\n",
+ (int) priv->sram_desc.last_cb_index);
+
+ while (current_index < priv->sram_desc.last_cb_index) {
+ udelay(50);
+ current_index = ipw_fw_dma_command_block_index(priv);
+
+ watchdog++;
+
+ if (watchdog > 400) {
+ IPW_DEBUG_FW_INFO("Timeout\n");
+ ipw_fw_dma_dump_command_block(priv);
+ ipw_fw_dma_abort(priv);
+ return -1;
+ }
+ }
+
+ ipw_fw_dma_abort(priv);
+
+ /*Disable the DMA in the CSR register*/
+ ipw_set_bit(priv, CX2_RESET_REG,
+ CX2_RESET_REG_MASTER_DISABLED | CX2_RESET_REG_STOP_MASTER);
+
+ IPW_DEBUG_FW("<< dmaWaitSync \n");
+ return 0;
+}
+
+static void ipw_remove_current_network(struct ipw_priv *priv)
+{
+ struct list_head *element, *safe;
+ struct ieee80211_network *network = NULL;
+ list_for_each_safe(element, safe, &priv->ieee->network_list) {
+ network = list_entry(element, struct ieee80211_network, list);
+ if (!memcmp(network->bssid, priv->bssid, ETH_ALEN)) {
+ list_del(element);
+ list_add_tail(&network->list,
+ &priv->ieee->network_free_list);
+ }
+ }
+}
+
+/**
+ * Check that card is still alive.
+ * Reads debug register from domain0.
+ * If card is present, pre-defined value should
+ * be found there.
+ *
+ * @param priv
+ * @return 1 if card is present, 0 otherwise
+ */
+static inline int ipw_alive(struct ipw_priv *priv)
+{
+ return ipw_read32(priv, 0x90) == 0xd55555d5;
+}
+
+static inline int ipw_poll_bit(struct ipw_priv *priv, u32 addr, u32 mask,
+ int timeout)
+{
+ int i = 0;
+
+ do {
+ if ((ipw_read32(priv, addr) & mask) == mask)
+ return i;
+ mdelay(10);
+ i += 10;
+ } while (i < timeout);
+
+ return -ETIME;
+}
+
+/* These functions load the firmware and micro code for the operation of
+ * the ipw hardware. It assumes the buffer has all the bits for the
+ * image and the caller is handling the memory allocation and clean up.
+ */
+
+
+static int ipw_stop_master(struct ipw_priv * priv)
+{
+ int rc;
+
+ IPW_DEBUG_TRACE(">> \n");
+ /* stop master. typical delay - 0 */
+ ipw_set_bit(priv, CX2_RESET_REG, CX2_RESET_REG_STOP_MASTER);
+
+ rc = ipw_poll_bit(priv, CX2_RESET_REG,
+ CX2_RESET_REG_MASTER_DISABLED, 100);
+ if (rc < 0) {
+ IPW_ERROR("stop master failed in 10ms\n");
+ return -1;
+ }
+
+ IPW_DEBUG_INFO("stop master %dms\n", rc);
+
+ return rc;
+}
+
+static void ipw_arc_release(struct ipw_priv *priv)
+{
+ IPW_DEBUG_TRACE(">> \n");
+ mdelay(5);
+
+ ipw_clear_bit(priv, CX2_RESET_REG, CBD_RESET_REG_PRINCETON_RESET);
+
+ /* no one knows timing, for safety add some delay */
+ mdelay(5);
+}
+
+struct fw_header {
+ u32 version;
+ u32 mode;
+};
+
+struct fw_chunk {
+ u32 address;
+ u32 length;
+};
+
+#define IPW_FW_MAJOR_VERSION 2
+#define IPW_FW_MINOR_VERSION 2
+
+#define IPW_FW_MINOR(x) ((x & 0xff) >> 8)
+#define IPW_FW_MAJOR(x) (x & 0xff)
+
+#define IPW_FW_VERSION ((IPW_FW_MINOR_VERSION << 8) | \
+ IPW_FW_MAJOR_VERSION)
+
+#define IPW_FW_PREFIX "ipw-" __stringify(IPW_FW_MAJOR_VERSION) \
+"." __stringify(IPW_FW_MINOR_VERSION) "-"
+
+#if IPW_FW_MAJOR_VERSION >= 2 && IPW_FW_MINOR_VERSION > 0
+#define IPW_FW_NAME(x) IPW_FW_PREFIX "" x ".fw"
+#else
+#define IPW_FW_NAME(x) "ipw2200_" x ".fw"
+#endif
+
+static int ipw_load_ucode(struct ipw_priv *priv, u8 * data,
+ size_t len)
+{
+ int rc = 0, i, addr;
+ u8 cr = 0;
+ u16 *image;
+
+ image = (u16 *)data;
+
+ IPW_DEBUG_TRACE(">> \n");
+
+ rc = ipw_stop_master(priv);
+
+ if (rc < 0)
+ return rc;
+
+// spin_lock_irqsave(&priv->lock, flags);
+
+ for (addr = CX2_SHARED_LOWER_BOUND;
+ addr < CX2_REGISTER_DOMAIN1_END; addr += 4) {
+ ipw_write32(priv, addr, 0);
+ }
+
+ /* no ucode (yet) */
+ memset(&priv->dino_alive, 0, sizeof(priv->dino_alive));
+ /* destroy DMA queues */
+ /* reset sequence */
+
+ ipw_write_reg32(priv, CX2_MEM_HALT_AND_RESET ,CX2_BIT_HALT_RESET_ON);
+ ipw_arc_release(priv);
+ ipw_write_reg32(priv, CX2_MEM_HALT_AND_RESET, CX2_BIT_HALT_RESET_OFF);
+ mdelay(1);
+
+ /* reset PHY */
+ ipw_write_reg32(priv, CX2_INTERNAL_CMD_EVENT, CX2_BASEBAND_POWER_DOWN);
+ mdelay(1);
+
+ ipw_write_reg32(priv, CX2_INTERNAL_CMD_EVENT, 0);
+ mdelay(1);
+
+ /* enable ucode store */
+ ipw_write_reg8(priv, DINO_CONTROL_REG, 0x0);
+ ipw_write_reg8(priv, DINO_CONTROL_REG, DINO_ENABLE_CS);
+ mdelay(1);
+
+ /* write ucode */
+ /**
+ * @bug
+ * Do NOT set indirect address register once and then
+ * store data to indirect data register in the loop.
+ * It seems very reasonable, but in this case DINO do not
+ * accept ucode. It is essential to set address each time.
+ */
+ /* load new ipw uCode */
+ for (i = 0; i < len / 2; i++)
+ ipw_write_reg16(priv, CX2_BASEBAND_CONTROL_STORE, image[i]);
+
+
+ /* enable DINO */
+ ipw_write_reg8(priv, CX2_BASEBAND_CONTROL_STATUS, 0);
+ ipw_write_reg8(priv, CX2_BASEBAND_CONTROL_STATUS,
+ DINO_ENABLE_SYSTEM );
+
+ /* this is where the igx / win driver deveates from the VAP driver.*/
+
+ /* wait for alive response */
+ for (i = 0; i < 100; i++) {
+ /* poll for incoming data */
+ cr = ipw_read_reg8(priv, CX2_BASEBAND_CONTROL_STATUS);
+ if (cr & DINO_RXFIFO_DATA)
+ break;
+ mdelay(1);
+ }
+
+ if (cr & DINO_RXFIFO_DATA) {
+ /* alive_command_responce size is NOT multiple of 4 */
+ u32 response_buffer[(sizeof(priv->dino_alive) + 3) / 4];
+
+ for (i = 0; i < ARRAY_SIZE(response_buffer); i++)
+ response_buffer[i] =
+ ipw_read_reg32(priv,
+ CX2_BASEBAND_RX_FIFO_READ);
+ memcpy(&priv->dino_alive, response_buffer,
+ sizeof(priv->dino_alive));
+ if (priv->dino_alive.alive_command == 1
+ && priv->dino_alive.ucode_valid == 1) {
+ rc = 0;
+ IPW_DEBUG_INFO(
+ "Microcode OK, rev. %d (0x%x) dev. %d (0x%x) "
+ "of %02d/%02d/%02d %02d:%02d\n",
+ priv->dino_alive.software_revision,
+ priv->dino_alive.software_revision,
+ priv->dino_alive.device_identifier,
+ priv->dino_alive.device_identifier,
+ priv->dino_alive.time_stamp[0],
+ priv->dino_alive.time_stamp[1],
+ priv->dino_alive.time_stamp[2],
+ priv->dino_alive.time_stamp[3],
+ priv->dino_alive.time_stamp[4]);
+ } else {
+ IPW_DEBUG_INFO("Microcode is not alive\n");
+ rc = -EINVAL;
+ }
+ } else {
+ IPW_DEBUG_INFO("No alive response from DINO\n");
+ rc = -ETIME;
+ }
+
+ /* disable DINO, otherwise for some reason
+ firmware have problem getting alive resp. */
+ ipw_write_reg8(priv, CX2_BASEBAND_CONTROL_STATUS, 0);
+
+// spin_unlock_irqrestore(&priv->lock, flags);
+
+ return rc;
+}
+
+static int ipw_load_firmware(struct ipw_priv *priv, u8 * data,
+ size_t len)
+{
+ int rc = -1;
+ int offset = 0;
+ struct fw_chunk *chunk;
+ dma_addr_t shared_phys;
+ u8 *shared_virt;
+
+ IPW_DEBUG_TRACE("<< : \n");
+ shared_virt = pci_alloc_consistent(priv->pci_dev, len, &shared_phys);
+
+ if (!shared_virt)
+ return -ENOMEM;
+
+ memmove(shared_virt, data, len);
+
+ /* Start the Dma */
+ rc = ipw_fw_dma_enable(priv);
+
+ if (priv->sram_desc.last_cb_index > 0) {
+ /* the DMA is already ready this would be a bug. */
+ BUG();
+ goto out;
+ }
+
+ do {
+ chunk = (struct fw_chunk *)(data + offset);
+ offset += sizeof(struct fw_chunk);
+ /* build DMA packet and queue up for sending */
+ /* dma to chunk->address, the chunk->length bytes from data +
+ * offeset*/
+ /* Dma loading */
+ rc = ipw_fw_dma_add_buffer(priv, shared_phys + offset,
+ chunk->address, chunk->length);
+ if (rc) {
+ IPW_DEBUG_INFO("dmaAddBuffer Failed\n");
+ goto out;
+ }
+
+ offset += chunk->length;
+ } while (offset < len);
+
+ /* Run the DMA and wait for the answer*/
+ rc = ipw_fw_dma_kick(priv);
+ if (rc) {
+ IPW_ERROR("dmaKick Failed\n");
+ goto out;
+ }
+
+ rc = ipw_fw_dma_wait(priv);
+ if (rc) {
+ IPW_ERROR("dmaWaitSync Failed\n");
+ goto out;
+ }
+ out:
+ pci_free_consistent( priv->pci_dev, len, shared_virt, shared_phys);
+ return rc;
+}
+
+/* stop nic */
+static int ipw_stop_nic(struct ipw_priv *priv)
+{
+ int rc = 0;
+
+ /* stop*/
+ ipw_write32(priv, CX2_RESET_REG, CX2_RESET_REG_STOP_MASTER);
+
+ rc = ipw_poll_bit(priv, CX2_RESET_REG,
+ CX2_RESET_REG_MASTER_DISABLED, 500);
+ if (rc < 0) {
+ IPW_ERROR("wait for reg master disabled failed\n");
+ return rc;
+ }
+
+ ipw_set_bit(priv, CX2_RESET_REG, CBD_RESET_REG_PRINCETON_RESET);
+
+ return rc;
+}
+
+static void ipw_start_nic(struct ipw_priv *priv)
+{
+ IPW_DEBUG_TRACE(">>\n");
+
+ /* prvHwStartNic release ARC*/
+ ipw_clear_bit(priv, CX2_RESET_REG,
+ CX2_RESET_REG_MASTER_DISABLED |
+ CX2_RESET_REG_STOP_MASTER |
+ CBD_RESET_REG_PRINCETON_RESET);
+
+ /* enable power management */
+ ipw_set_bit(priv, CX2_GP_CNTRL_RW, CX2_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
+
+ IPW_DEBUG_TRACE("<<\n");
+}
+
+static int ipw_init_nic(struct ipw_priv *priv)
+{
+ int rc;
+
+ IPW_DEBUG_TRACE(">>\n");
+ /* reset */
+ /*prvHwInitNic */
+ /* set "initialization complete" bit to move adapter to D0 state */
+ ipw_set_bit(priv, CX2_GP_CNTRL_RW, CX2_GP_CNTRL_BIT_INIT_DONE);
+
+ /* low-level PLL activation */
+ ipw_write32(priv, CX2_READ_INT_REGISTER, CX2_BIT_INT_HOST_SRAM_READ_INT_REGISTER);
+
+ /* wait for clock stabilization */
+ rc = ipw_poll_bit(priv, CX2_GP_CNTRL_RW,
+ CX2_GP_CNTRL_BIT_CLOCK_READY, 250);
+ if (rc < 0 )
+ IPW_DEBUG_INFO("FAILED wait for clock stablization\n");
+
+ /* assert SW reset */
+ ipw_set_bit(priv, CX2_RESET_REG, CX2_RESET_REG_SW_RESET);
+
+ udelay(10);
+
+ /* set "initialization complete" bit to move adapter to D0 state */
+ ipw_set_bit(priv, CX2_GP_CNTRL_RW, CX2_GP_CNTRL_BIT_INIT_DONE);
+
+ IPW_DEBUG_TRACE(">>\n");
+ return 0;
+}
+
+
+/* Call this function from process context, it will sleep in request_firmware.
+ * Probe is an ok place to call this from.
+ */
+static int ipw_reset_nic(struct ipw_priv *priv)
+{
+ int rc = 0;
+
+ IPW_DEBUG_TRACE(">>\n");
+
+ rc = ipw_init_nic(priv);
+
+ /* Clear the 'host command active' bit... */
+ priv->status &= ~STATUS_HCMD_ACTIVE;
+ wake_up_interruptible(&priv->wait_command_queue);
+
+ IPW_DEBUG_TRACE("<<\n");
+ return rc;
+}
+
+static int ipw_get_fw(struct ipw_priv *priv,
+ const struct firmware **fw, const char *name)
+{
+ struct fw_header *header;
+ int rc;
+
+ /* ask firmware_class module to get the boot firmware off disk */
+ rc = request_firmware(fw, name, &priv->pci_dev->dev);
+ if (rc < 0) {
+ IPW_ERROR("%s load failed: Reason %d\n", name, rc);
+ return rc;
+ }
+
+ header = (struct fw_header *)(*fw)->data;
+ if (IPW_FW_MAJOR(header->version) != IPW_FW_MAJOR_VERSION) {
+ IPW_ERROR("'%s' firmware version not compatible (%d != %d)\n",
+ name,
+ IPW_FW_MAJOR(header->version), IPW_FW_MAJOR_VERSION);
+ return -EINVAL;
+ }
+
+ IPW_DEBUG_INFO("Loading firmware '%s' file v%d.%d (%d bytes)\n",
+ name,
+ IPW_FW_MAJOR(header->version),
+ IPW_FW_MINOR(header->version),
+ (*fw)->size - sizeof(struct fw_header));
+ return 0;
+}
+
+#define CX2_RX_BUF_SIZE (3000)
+
+static inline void ipw_rx_queue_reset(struct ipw_priv *priv,
+ struct ipw_rx_queue *rxq)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+ /* In the reset function, these buffers may have been allocated
+ * to an SKB, so we need to unmap and free potential storage */
+ if (rxq->pool[i].skb != NULL) {
+ pci_unmap_single(priv->pci_dev, rxq->pool[i].dma_addr,
+ CX2_RX_BUF_SIZE,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rxq->pool[i].skb);
+ }
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+ }
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->processed = RX_QUEUE_SIZE - 1;
+ rxq->free_count = 0;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+}
+
+#ifdef CONFIG_PM
+static int fw_loaded = 0;
+static const struct firmware *bootfw = NULL;
+static const struct firmware *firmware = NULL;
+static const struct firmware *ucode = NULL;
+#endif
+
+static int ipw_load(struct ipw_priv *priv)
+{
+#ifndef CONFIG_PM
+ const struct firmware *bootfw = NULL;
+ const struct firmware *firmware = NULL;
+ const struct firmware *ucode = NULL;
+#endif
+ int rc = 0, retries = 3;
+
+#ifdef CONFIG_PM
+ if (!fw_loaded) {
+#endif
+ rc = ipw_get_fw(priv, &bootfw, IPW_FW_NAME("boot"));
+ if (rc)
+ goto error;
+
+ switch (priv->ieee->iw_mode) {
+ case IW_MODE_ADHOC:
+ rc = ipw_get_fw(priv, &ucode,
+ IPW_FW_NAME("ibss_ucode"));
+ if (rc)
+ goto error;
+
+ rc = ipw_get_fw(priv, &firmware, IPW_FW_NAME("ibss"));
+ break;
+
+#ifdef CONFIG_IPW_PROMISC
+ case IW_MODE_MONITOR:
+ rc = ipw_get_fw(priv, &ucode,
+ IPW_FW_NAME("ibss_ucode"));
+ if (rc)
+ goto error;
+
+ rc = ipw_get_fw(priv, &firmware, IPW_FW_NAME("sniffer"));
+ break;
+#endif
+ case IW_MODE_INFRA:
+ rc = ipw_get_fw(priv, &ucode,
+ IPW_FW_NAME("bss_ucode"));
+ if (rc)
+ goto error;
+
+ rc = ipw_get_fw(priv, &firmware, IPW_FW_NAME("bss"));
+ break;
+
+ default:
+ rc = -EINVAL;
+ }
+
+ if (rc)
+ goto error;
+
+#ifdef CONFIG_PM
+ fw_loaded = 1;
+ }
+#endif
+
+ if (!priv->rxq)
+ priv->rxq = ipw_rx_queue_alloc(priv);
+ else
+ ipw_rx_queue_reset(priv, priv->rxq);
+ if (!priv->rxq) {
+ IPW_ERROR("Unable to initialize Rx queue\n");
+ goto error;
+ }
+
+ retry:
+ /* Ensure interrupts are disabled */
+ ipw_write32(priv, CX2_INTA_MASK_R, ~CX2_INTA_MASK_ALL);
+ priv->status &= ~STATUS_INT_ENABLED;
+
+ /* ack pending interrupts */
+ ipw_write32(priv, CX2_INTA_RW, CX2_INTA_MASK_ALL);
+
+ ipw_stop_nic(priv);
+
+ rc = ipw_reset_nic(priv);
+ if (rc) {
+ IPW_ERROR("Unable to reset NIC\n");
+ goto error;
+ }
+
+ ipw_zero_memory(priv, CX2_NIC_SRAM_LOWER_BOUND,
+ CX2_NIC_SRAM_UPPER_BOUND - CX2_NIC_SRAM_LOWER_BOUND);
+
+ /* DMA the initial boot firmware into the device */
+ rc = ipw_load_firmware(priv, bootfw->data + sizeof(struct fw_header),
+ bootfw->size - sizeof(struct fw_header));
+ if (rc < 0) {
+ IPW_ERROR("Unable to load boot firmware\n");
+ goto error;
+ }
+
+ /* kick start the device */
+ ipw_start_nic(priv);
+
+ /* wait for the device to finish it's initial startup sequence */
+ rc = ipw_poll_bit(priv, CX2_INTA_RW,
+ CX2_INTA_BIT_FW_INITIALIZATION_DONE, 500);
+ if (rc < 0) {
+ IPW_ERROR("device failed to boot initial fw image\n");
+ goto error;
+ }
+ IPW_DEBUG_INFO("initial device response after %dms\n", rc);
+
+ /* ack fw init done interrupt */
+ ipw_write32(priv, CX2_INTA_RW, CX2_INTA_BIT_FW_INITIALIZATION_DONE);
+
+ /* DMA the ucode into the device */
+ rc = ipw_load_ucode(priv, ucode->data + sizeof(struct fw_header),
+ ucode->size - sizeof(struct fw_header));
+ if (rc < 0) {
+ IPW_ERROR("Unable to load ucode\n");
+ goto error;
+ }
+
+ /* stop nic */
+ ipw_stop_nic(priv);
+
+ /* DMA bss firmware into the device */
+ rc = ipw_load_firmware(priv, firmware->data +
+ sizeof(struct fw_header),
+ firmware->size - sizeof(struct fw_header));
+ if (rc < 0 ) {
+ IPW_ERROR("Unable to load firmware\n");
+ goto error;
+ }
+
+ ipw_write32(priv, IPW_EEPROM_LOAD_DISABLE, 0);
+
+ rc = ipw_queue_reset(priv);
+ if (rc) {
+ IPW_ERROR("Unable to initialize queues\n");
+ goto error;
+ }
+
+ /* Ensure interrupts are disabled */
+ ipw_write32(priv, CX2_INTA_MASK_R, ~CX2_INTA_MASK_ALL);
+
+ /* kick start the device */
+ ipw_start_nic(priv);
+
+ if (ipw_read32(priv, CX2_INTA_RW) & CX2_INTA_BIT_PARITY_ERROR) {
+ if (retries > 0) {
+ IPW_WARNING("Parity error. Retrying init.\n");
+ retries--;
+ goto retry;
+ }
+
+ IPW_ERROR("TODO: Handle parity error -- schedule restart?\n");
+ rc = -EIO;
+ goto error;
+ }
+
+ /* wait for the device */
+ rc = ipw_poll_bit(priv, CX2_INTA_RW,
+ CX2_INTA_BIT_FW_INITIALIZATION_DONE, 500);
+ if (rc < 0) {
+ IPW_ERROR("device failed to start after 500ms\n");
+ goto error;
+ }
+ IPW_DEBUG_INFO("device response after %dms\n", rc);
+
+ /* ack fw init done interrupt */
+ ipw_write32(priv, CX2_INTA_RW, CX2_INTA_BIT_FW_INITIALIZATION_DONE);
+
+ /* read eeprom data and initialize the eeprom region of sram */
+ priv->eeprom_delay = 1;
+ ipw_eeprom_init_sram(priv);
+
+ /* enable interrupts */
+ ipw_enable_interrupts(priv);
+
+ /* Ensure our queue has valid packets */
+ ipw_rx_queue_replenish(priv);
+
+ ipw_write32(priv, CX2_RX_READ_INDEX, priv->rxq->read);
+
+ /* ack pending interrupts */
+ ipw_write32(priv, CX2_INTA_RW, CX2_INTA_MASK_ALL);
+
+#ifndef CONFIG_PM
+ release_firmware(bootfw);
+ release_firmware(ucode);
+ release_firmware(firmware);
+#endif
+ return 0;
+
+ error:
+ if (priv->rxq) {
+ ipw_rx_queue_free(priv, priv->rxq);
+ priv->rxq = NULL;
+ }
+ ipw_tx_queue_free(priv);
+ if (bootfw)
+ release_firmware(bootfw);
+ if (ucode)
+ release_firmware(ucode);
+ if (firmware)
+ release_firmware(firmware);
+#ifdef CONFIG_PM
+ fw_loaded = 0;
+ bootfw = ucode = firmware = NULL;
+#endif
+
+ return rc;
+}
+
+/**
+ * DMA services
+ *
+ * Theory of operation
+ *
+ * A queue is a circular buffers with 'Read' and 'Write' pointers.
+ * 2 empty entries always kept in the buffer to protect from overflow.
+ *
+ * For Tx queue, there are low mark and high mark limits. If, after queuing
+ * the packet for Tx, free space become < low mark, Tx queue stopped. When
+ * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
+ * Tx queue resumed.
+ *
+ * The IPW operates with six queues, one receive queue in the device's
+ * sram, one transmit queue for sending commands to the device firmware,
+ * and four transmit queues for data.
+ *
+ * The four transmit queues allow for performing quality of service (qos)
+ * transmissions as per the 802.11 protocol. Currently Linux does not
+ * provide a mechanism to the user for utilizing prioritized queues, so
+ * we only utilize the first data transmit queue (queue1).
+ */
+
+/**
+ * Driver allocates buffers of this size for Rx
+ */
+
+static inline int ipw_queue_space(const struct clx2_queue *q)
+{
+ int s = q->last_used - q->first_empty;
+ if (s <= 0)
+ s += q->n_bd;
+ s -= 2; /* keep some reserve to not confuse empty and full situations */
+ if (s < 0)
+ s = 0;
+ return s;
+}
+
+static inline int ipw_queue_inc_wrap(int index, int n_bd)
+{
+ return (++index == n_bd) ? 0 : index;
+}
+
+/**
+ * Initialize common DMA queue structure
+ *
+ * @param q queue to init
+ * @param count Number of BD's to allocate. Should be power of 2
+ * @param read_register Address for 'read' register
+ * (not offset within BAR, full address)
+ * @param write_register Address for 'write' register
+ * (not offset within BAR, full address)
+ * @param base_register Address for 'base' register
+ * (not offset within BAR, full address)
+ * @param size Address for 'size' register
+ * (not offset within BAR, full address)
+ */
+static void ipw_queue_init(struct ipw_priv *priv, struct clx2_queue *q,
+ int count, u32 read, u32 write,
+ u32 base, u32 size)
+{
+ q->n_bd = count;
+
+ q->low_mark = q->n_bd / 4;
+ if (q->low_mark < 4)
+ q->low_mark = 4;
+
+ q->high_mark = q->n_bd / 8;
+ if (q->high_mark < 2)
+ q->high_mark = 2;
+
+ q->first_empty = q->last_used = 0;
+ q->reg_r = read;
+ q->reg_w = write;
+
+ ipw_write32(priv, base, q->dma_addr);
+ ipw_write32(priv, size, count);
+ ipw_write32(priv, read, 0);
+ ipw_write32(priv, write, 0);
+
+ _ipw_read32(priv, 0x90);
+}
+
+static int ipw_queue_tx_init(struct ipw_priv *priv,
+ struct clx2_tx_queue *q,
+ int count, u32 read, u32 write,
+ u32 base, u32 size)
+{
+ struct pci_dev *dev = priv->pci_dev;
+
+ q->txb = kmalloc(sizeof(q->txb[0]) * count, GFP_KERNEL);
+ if (!q->txb) {
+ IPW_ERROR("vmalloc for auxilary BD structures failed\n");
+ return -ENOMEM;
+ }
+
+ q->bd = pci_alloc_consistent(dev,sizeof(q->bd[0])*count, &q->q.dma_addr);
+ if (!q->bd) {
+ IPW_ERROR("pci_alloc_consistent(%d) failed\n",
+ sizeof(q->bd[0]) * count);
+ kfree(q->txb);
+ q->txb = NULL;
+ return -ENOMEM;
+ }
+
+ ipw_queue_init(priv, &q->q, count, read, write, base, size);
+ return 0;
+}
+
+/**
+ * Free one TFD, those at index [txq->q.last_used].
+ * Do NOT advance any indexes
+ *
+ * @param dev
+ * @param txq
+ */
+static void ipw_queue_tx_free_tfd(struct ipw_priv *priv,
+ struct clx2_tx_queue *txq)
+{
+ struct tfd_frame *bd = &txq->bd[txq->q.last_used];
+ struct pci_dev *dev = priv->pci_dev;
+ int i;
+
+ /* classify bd */
+ if (bd->control_flags.message_type == TX_HOST_COMMAND_TYPE)
+ /* nothing to cleanup after for host commands */
+ return;
+
+ /* sanity check */
+ if (bd->u.data.num_chunks > NUM_TFD_CHUNKS) {
+ IPW_ERROR("Too many chunks: %i\n", bd->u.data.num_chunks);
+ /** @todo issue fatal error, it is quite serious situation */
+ return;
+ }
+
+ /* unmap chunks if any */
+ for (i = 0; i < bd->u.data.num_chunks; i++) {
+ pci_unmap_single(dev, bd->u.data.chunk_ptr[i],
+ bd->u.data.chunk_len[i], PCI_DMA_TODEVICE);
+ if (txq->txb[txq->q.last_used]) {
+ ieee80211_txb_free(txq->txb[txq->q.last_used]);
+ txq->txb[txq->q.last_used] = NULL;
+ }
+ }
+}
+
+/**
+ * Deallocate DMA queue.
+ *
+ * Empty queue by removing and destroying all BD's.
+ * Free all buffers.
+ *
+ * @param dev
+ * @param q
+ */
+static void ipw_queue_tx_free(struct ipw_priv *priv,
+ struct clx2_tx_queue *txq)
+{
+ struct clx2_queue *q = &txq->q;
+ struct pci_dev *dev = priv->pci_dev;
+
+ if (q->n_bd == 0)
+ return;
+
+ /* first, empty all BD's */
+ for (; q->first_empty != q->last_used;
+ q->last_used = ipw_queue_inc_wrap(q->last_used, q->n_bd)) {
+ ipw_queue_tx_free_tfd(priv, txq);
+ }
+
+ /* free buffers belonging to queue itself */
+ pci_free_consistent(dev, sizeof(txq->bd[0])*q->n_bd, txq->bd,
+ q->dma_addr);
+ kfree(txq->txb);
+
+ /* 0 fill whole structure */
+ memset(txq, 0, sizeof(*txq));
+}
+
+
+/**
+ * Destroy all DMA queues and structures
+ *
+ * @param priv
+ */
+static void ipw_tx_queue_free(struct ipw_priv *priv)
+{
+ /* Tx CMD queue */
+ ipw_queue_tx_free(priv, &priv->txq_cmd);
+
+ /* Tx queues */
+ ipw_queue_tx_free(priv, &priv->txq[0]);
+ ipw_queue_tx_free(priv, &priv->txq[1]);
+ ipw_queue_tx_free(priv, &priv->txq[2]);
+ ipw_queue_tx_free(priv, &priv->txq[3]);
+}
+
+static void inline __maybe_wake_tx(struct ipw_priv *priv)
+{
+ if (netif_running(priv->net_dev)) {
+ switch (priv->port_type) {
+ case DCR_TYPE_MU_BSS:
+ case DCR_TYPE_MU_IBSS:
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ return;
+ }
+ }
+ netif_wake_queue(priv->net_dev);
+ }
+
+}
+
+static inline void ipw_create_bssid(struct ipw_priv *priv, u8 *bssid)
+{
+ /* First 3 bytes are manufacturer */
+ bssid[0] = priv->mac_addr[0];
+ bssid[1] = priv->mac_addr[1];
+ bssid[2] = priv->mac_addr[2];
+
+ /* Last bytes are random */
+ get_random_bytes(&bssid[3], ETH_ALEN-3);
+
+ bssid[0] &= 0xfe; /* clear multicast bit */
+ bssid[0] |= 0x02; /* set local assignment bit (IEEE802) */
+}
+
+static inline u8 ipw_add_station(struct ipw_priv *priv, u8 *bssid)
+{
+ struct ipw_station_entry entry;
+ int i;
+
+ for (i = 0; i < priv->num_stations; i++) {
+ if (!memcmp(priv->stations[i], bssid, ETH_ALEN)) {
+ /* Another node is active in network */
+ priv->missed_adhoc_beacons = 0;
+ if (!(priv->config & CFG_STATIC_CHANNEL))
+ /* when other nodes drop out, we drop out */
+ priv->config &= ~CFG_ADHOC_PERSIST;
+
+ return i;
+ }
+ }
+
+ if (i == MAX_STATIONS)
+ return IPW_INVALID_STATION;
+
+ IPW_DEBUG_SCAN("Adding AdHoc station: " MAC_FMT "\n", MAC_ARG(bssid));
+
+ entry.reserved = 0;
+ entry.support_mode = 0;
+ memcpy(entry.mac_addr, bssid, ETH_ALEN);
+ memcpy(priv->stations[i], bssid, ETH_ALEN);
+ ipw_write_direct(priv, IPW_STATION_TABLE_LOWER + i * sizeof(entry),
+ &entry,
+ sizeof(entry));
+ priv->num_stations++;
+
+ return i;
+}
+
+static inline u8 ipw_find_station(struct ipw_priv *priv, u8 *bssid)
+{
+ int i;
+
+ for (i = 0; i < priv->num_stations; i++)
+ if (!memcmp(priv->stations[i], bssid, ETH_ALEN))
+ return i;
+
+ return IPW_INVALID_STATION;
+}
+
+static void ipw_send_disassociate(struct ipw_priv *priv, int quiet)
+{
+ int err;
+
+ if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED))) {
+ IPW_DEBUG_ASSOC("Disassociating while not associated.\n");
+ return;
+ }
+
+ IPW_DEBUG_ASSOC("Disassocation attempt from " MAC_FMT " "
+ "on channel %d.\n",
+ MAC_ARG(priv->assoc_request.bssid),
+ priv->assoc_request.channel);
+
+ priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
+ priv->status |= STATUS_DISASSOCIATING;
+
+ if (quiet)
+ priv->assoc_request.assoc_type = HC_DISASSOC_QUIET;
+ else
+ priv->assoc_request.assoc_type = HC_DISASSOCIATE;
+ err = ipw_send_associate(priv, &priv->assoc_request);
+ if (err) {
+ IPW_DEBUG_HC("Attempt to send [dis]associate command "
+ "failed.\n");
+ return;
+ }
+
+}
+
+static void ipw_disassociate(void *data)
+{
+ ipw_send_disassociate(data, 0);
+}
+
+static void notify_wx_assoc_event(struct ipw_priv *priv)
+{
+ union iwreq_data wrqu;
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ if (priv->status & STATUS_ASSOCIATED)
+ memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
+ else
+ memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
+ wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+struct ipw_status_code {
+ u16 status;
+ const char *reason;
+};
+
+static const struct ipw_status_code ipw_status_codes[] = {
+ {0x00, "Successful"},
+ {0x01, "Unspecified failure"},
+ {0x0A, "Cannot support all requested capabilities in the "
+ "Capability information field"},
+ {0x0B, "Reassociation denied due to inability to confirm that "
+ "association exists"},
+ {0x0C, "Association denied due to reason outside the scope of this "
+ "standard"},
+ {0x0D, "Responding station does not support the specified authentication "
+ "algorithm"},
+ {0x0E, "Received an Authentication frame with authentication sequence "
+ "transaction sequence number out of expected sequence"},
+ {0x0F, "Authentication rejected because of challenge failure"},
+ {0x10, "Authentication rejected due to timeout waiting for next "
+ "frame in sequence"},
+ {0x11, "Association denied because AP is unable to handle additional "
+ "associated stations"},
+ {0x12, "Association denied due to requesting station not supporting all "
+ "of the datarates in the BSSBasicServiceSet Parameter"},
+ {0x13, "Association denied due to requesting station not supporting "
+ "short preamble operation"},
+ {0x14, "Association denied due to requesting station not supporting "
+ "PBCC encoding"},
+ {0x15, "Association denied due to requesting station not supporting "
+ "channel agility"},
+ {0x19, "Association denied due to requesting station not supporting "
+ "short slot operation"},
+ {0x1A, "Association denied due to requesting station not supporting "
+ "DSSS-OFDM operation"},
+ {0x28, "Invalid Information Element"},
+ {0x29, "Group Cipher is not valid"},
+ {0x2A, "Pairwise Cipher is not valid"},
+ {0x2B, "AKMP is not valid"},
+ {0x2C, "Unsupported RSN IE version"},
+ {0x2D, "Invalid RSN IE Capabilities"},
+ {0x2E, "Cipher suite is rejected per security policy"},
+};
+
+#ifdef CONFIG_IPW_DEBUG
+static const char *ipw_get_status_code(u16 status)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(ipw_status_codes); i++)
+ if (ipw_status_codes[i].status == status)
+ return ipw_status_codes[i].reason;
+ return "Unknown status value.";
+}
+#endif
+
+static void inline average_init(struct average *avg)
+{
+ memset(avg, 0, sizeof(*avg));
+}
+
+static void inline average_add(struct average *avg, s16 val)
+{
+ avg->sum -= avg->entries[avg->pos];
+ avg->sum += val;
+ avg->entries[avg->pos++] = val;
+ if (unlikely(avg->pos == AVG_ENTRIES)) {
+ avg->init = 1;
+ avg->pos = 0;
+ }
+}
+
+static s16 inline average_value(struct average *avg)
+{
+ if (!unlikely(avg->init)) {
+ if (avg->pos)
+ return avg->sum / avg->pos;
+ return 0;
+ }
+
+ return avg->sum / AVG_ENTRIES;
+}
+
+static void ipw_reset_stats(struct ipw_priv *priv)
+{
+ u32 len = sizeof(u32);
+
+ priv->quality = 0;
+
+ average_init(&priv->average_missed_beacons);
+ average_init(&priv->average_rssi);
+ average_init(&priv->average_noise);
+
+ priv->last_rate = 0;
+ priv->last_missed_beacons = 0;
+ priv->last_rx_packets = 0;
+ priv->last_tx_packets = 0;
+ priv->last_tx_failures = 0;
+
+ /* Firmware managed, reset only when NIC is restarted, so we have to
+ * normalize on the current value */
+ ipw_get_ordinal(priv, IPW_ORD_STAT_RX_ERR_CRC,
+ &priv->last_rx_err, &len);
+ ipw_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURE,
+ &priv->last_tx_failures, &len);
+
+ /* Driver managed, reset with each association */
+ priv->missed_adhoc_beacons = 0;
+ priv->missed_beacons = 0;
+ priv->tx_packets = 0;
+ priv->rx_packets = 0;
+
+}
+
+
+static inline u32 ipw_get_max_rate(struct ipw_priv *priv)
+{
+ u32 i = 0x80000000;
+ u32 mask = priv->rates_mask;
+ /* If currently associated in B mode, restrict the maximum
+ * rate match to B rates */
+ if (priv->assoc_request.ieee_mode == IPW_B_MODE)
+ mask &= IEEE80211_CCK_RATES_MASK;
+
+ /* TODO: Verify that the rate is supported by the current rates
+ * list. */
+
+ while (i && !(mask & i)) i >>= 1;
+ switch (i) {
+ case IEEE80211_CCK_RATE_1MB_MASK: return 1000000;
+ case IEEE80211_CCK_RATE_2MB_MASK: return 2000000;
+ case IEEE80211_CCK_RATE_5MB_MASK: return 5500000;
+ case IEEE80211_OFDM_RATE_6MB_MASK: return 6000000;
+ case IEEE80211_OFDM_RATE_9MB_MASK: return 9000000;
+ case IEEE80211_CCK_RATE_11MB_MASK: return 11000000;
+ case IEEE80211_OFDM_RATE_12MB_MASK: return 12000000;
+ case IEEE80211_OFDM_RATE_18MB_MASK: return 18000000;
+ case IEEE80211_OFDM_RATE_24MB_MASK: return 24000000;
+ case IEEE80211_OFDM_RATE_36MB_MASK: return 36000000;
+ case IEEE80211_OFDM_RATE_48MB_MASK: return 48000000;
+ case IEEE80211_OFDM_RATE_54MB_MASK: return 54000000;
+ }
+
+ if (priv->ieee->mode == IEEE_B)
+ return 11000000;
+ else
+ return 54000000;
+}
+
+static u32 ipw_get_current_rate(struct ipw_priv *priv)
+{
+ u32 rate, len = sizeof(rate);
+ int err;
+
+ if (!(priv->status & STATUS_ASSOCIATED))
+ return 0;
+
+ if (priv->tx_packets > IPW_REAL_RATE_RX_PACKET_THRESHOLD) {
+ err = ipw_get_ordinal(priv, IPW_ORD_STAT_TX_CURR_RATE, &rate,
+ &len);
+ if (err) {
+ IPW_DEBUG_INFO("failed querying ordinals.\n");
+ return 0;
+ }
+ } else
+ return ipw_get_max_rate(priv);
+
+ switch (rate) {
+ case IPW_TX_RATE_1MB: return 1000000;
+ case IPW_TX_RATE_2MB: return 2000000;
+ case IPW_TX_RATE_5MB: return 5500000;
+ case IPW_TX_RATE_6MB: return 6000000;
+ case IPW_TX_RATE_9MB: return 9000000;
+ case IPW_TX_RATE_11MB: return 11000000;
+ case IPW_TX_RATE_12MB: return 12000000;
+ case IPW_TX_RATE_18MB: return 18000000;
+ case IPW_TX_RATE_24MB: return 24000000;
+ case IPW_TX_RATE_36MB: return 36000000;
+ case IPW_TX_RATE_48MB: return 48000000;
+ case IPW_TX_RATE_54MB: return 54000000;
+ }
+
+ return 0;
+}
+
+#define PERFECT_RSSI (-50)
+#define WORST_RSSI (-85)
+#define IPW_STATS_INTERVAL (2 * HZ)
+static void ipw_gather_stats(struct ipw_priv *priv)
+{
+ u32 rx_err, rx_err_delta, rx_packets_delta;
+ u32 tx_failures, tx_failures_delta, tx_packets_delta;
+ u32 missed_beacons_percent, missed_beacons_delta;
+ u32 quality = 0;
+ u32 len = sizeof(u32);
+ s16 rssi;
+ u32 beacon_quality, signal_quality, tx_quality, rx_quality,
+ rate_quality;
+
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ priv->quality = 0;
+ return;
+ }
+
+ /* Update the statistics */
+ ipw_get_ordinal(priv, IPW_ORD_STAT_MISSED_BEACONS,
+ &priv->missed_beacons, &len);
+ missed_beacons_delta = priv->missed_beacons -
+ priv->last_missed_beacons;
+ priv->last_missed_beacons = priv->missed_beacons;
+ if (priv->assoc_request.beacon_interval) {
+ missed_beacons_percent = missed_beacons_delta *
+ (HZ * priv->assoc_request.beacon_interval) /
+ (IPW_STATS_INTERVAL * 10);
+ } else {
+ missed_beacons_percent = 0;
+ }
+ average_add(&priv->average_missed_beacons, missed_beacons_percent);
+
+ ipw_get_ordinal(priv, IPW_ORD_STAT_RX_ERR_CRC, &rx_err, &len);
+ rx_err_delta = rx_err - priv->last_rx_err;
+ priv->last_rx_err = rx_err;
+
+ ipw_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURE, &tx_failures, &len);
+ tx_failures_delta = tx_failures - priv->last_tx_failures;
+ priv->last_tx_failures = tx_failures;
+
+ rx_packets_delta = priv->rx_packets - priv->last_rx_packets;
+ priv->last_rx_packets = priv->rx_packets;
+
+ tx_packets_delta = priv->tx_packets - priv->last_tx_packets;
+ priv->last_tx_packets = priv->tx_packets;
+
+ /* Calculate quality based on the following:
+ *
+ * Missed beacon: 100% = 0, 0% = 70% missed
+ * Rate: 60% = 1Mbs, 100% = Max
+ * Rx and Tx errors represent a straight % of total Rx/Tx
+ * RSSI: 100% = > -50, 0% = < -80
+ * Rx errors: 100% = 0, 0% = 50% missed
+ *
+ * The lowest computed quality is used.
+ *
+ */
+#define BEACON_THRESHOLD 5
+ beacon_quality = 100 - missed_beacons_percent;
+ if (beacon_quality < BEACON_THRESHOLD)
+ beacon_quality = 0;
+ else
+ beacon_quality = (beacon_quality - BEACON_THRESHOLD) * 100 /
+ (100 - BEACON_THRESHOLD);
+ IPW_DEBUG_STATS("Missed beacon: %3d%% (%d%%)\n",
+ beacon_quality, missed_beacons_percent);
+
+ priv->last_rate = ipw_get_current_rate(priv);
+ rate_quality = priv->last_rate * 40 / priv->last_rate + 60;
+ IPW_DEBUG_STATS("Rate quality : %3d%% (%dMbs)\n",
+ rate_quality, priv->last_rate / 1000000);
+
+ if (rx_packets_delta > 100 &&
+ rx_packets_delta + rx_err_delta)
+ rx_quality = 100 - (rx_err_delta * 100) /
+ (rx_packets_delta + rx_err_delta);
+ else
+ rx_quality = 100;
+ IPW_DEBUG_STATS("Rx quality : %3d%% (%u errors, %u packets)\n",
+ rx_quality, rx_err_delta, rx_packets_delta);
+
+ if (tx_packets_delta > 100 &&
+ tx_packets_delta + tx_failures_delta)
+ tx_quality = 100 - (tx_failures_delta * 100) /
+ (tx_packets_delta + tx_failures_delta);
+ else
+ tx_quality = 100;
+ IPW_DEBUG_STATS("Tx quality : %3d%% (%u errors, %u packets)\n",
+ tx_quality, tx_failures_delta, tx_packets_delta);
+
+ rssi = average_value(&priv->average_rssi);
+ if (rssi > PERFECT_RSSI)
+ signal_quality = 100;
+ else if (rssi < WORST_RSSI)
+ signal_quality = 0;
+ else
+ signal_quality = (rssi - WORST_RSSI) * 100 /
+ (PERFECT_RSSI - WORST_RSSI);
+ IPW_DEBUG_STATS("Signal level : %3d%% (%d dBm)\n",
+ signal_quality, rssi);
+
+ quality = min(beacon_quality,
+ min(rate_quality,
+ min(tx_quality, min(rx_quality, signal_quality))));
+ if (quality == beacon_quality)
+ IPW_DEBUG_STATS(
+ "Quality (%d%%): Clamped to missed beacons.\n",
+ quality);
+ if (quality == rate_quality)
+ IPW_DEBUG_STATS(
+ "Quality (%d%%): Clamped to rate quality.\n",
+ quality);
+ if (quality == tx_quality)
+ IPW_DEBUG_STATS(
+ "Quality (%d%%): Clamped to Tx quality.\n",
+ quality);
+ if (quality == rx_quality)
+ IPW_DEBUG_STATS(
+ "Quality (%d%%): Clamped to Rx quality.\n",
+ quality);
+ if (quality == signal_quality)
+ IPW_DEBUG_STATS(
+ "Quality (%d%%): Clamped to signal quality.\n",
+ quality);
+
+ priv->quality = quality;
+
+ queue_delayed_work(priv->workqueue, &priv->gather_stats,
+ IPW_STATS_INTERVAL);
+}
+
+/**
+ * Handle host notification packet.
+ * Called from interrupt routine
+ */
+static inline void ipw_rx_notification(struct ipw_priv* priv,
+ struct ipw_rx_notification *notif)
+{
+ IPW_DEBUG_NOTIF("type = %i (%d bytes)\n",
+ notif->subtype, notif->size);
+
+ switch (notif->subtype) {
+ case HOST_NOTIFICATION_STATUS_ASSOCIATED: {
+ struct notif_association *assoc = ¬if->u.assoc;
+
+ switch (assoc->state) {
+ case CMAS_ASSOCIATED: {
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "associated: '%s' " MAC_FMT " \n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid));
+
+ switch (priv->ieee->iw_mode) {
+ case IW_MODE_INFRA:
+ memcpy(priv->ieee->bssid, priv->bssid,
+ ETH_ALEN);
+ break;
+
+ case IW_MODE_ADHOC:
+ memcpy(priv->ieee->bssid, priv->bssid,
+ ETH_ALEN);
+
+ /* clear out the station table */
+ priv->num_stations = 0;
+
+ IPW_DEBUG_ASSOC("queueing adhoc check\n");
+ queue_delayed_work(priv->workqueue,
+ &priv->adhoc_check,
+ priv->assoc_request.beacon_interval);
+ break;
+ }
+
+ priv->status &= ~STATUS_ASSOCIATING;
+ priv->status |= STATUS_ASSOCIATED;
+
+ netif_carrier_on(priv->net_dev);
+ if (netif_queue_stopped(priv->net_dev)) {
+ IPW_DEBUG_NOTIF("waking queue\n");
+ netif_wake_queue(priv->net_dev);
+ } else {
+ IPW_DEBUG_NOTIF("starting queue\n");
+ netif_start_queue(priv->net_dev);
+ }
+
+ ipw_reset_stats(priv);
+ /* Ensure the rate is updated immediately */
+ priv->last_rate = ipw_get_current_rate(priv);
+ schedule_work(&priv->gather_stats);
+ notify_wx_assoc_event(priv);
+
+/* queue_delayed_work(priv->workqueue,
+ &priv->request_scan,
+ SCAN_ASSOCIATED_INTERVAL);
+*/
+ break;
+ }
+
+ case CMAS_AUTHENTICATED: {
+ if (priv->status & (STATUS_ASSOCIATED | STATUS_AUTH)) {
+#ifdef CONFIG_IPW_DEBUG
+ struct notif_authenticate *auth = ¬if->u.auth;
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "deauthenticated: '%s' " MAC_FMT ": (0x%04X) - %s \n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid),
+ ntohs(auth->status),
+ ipw_get_status_code(ntohs(auth->status)));
+#endif
+
+ priv->status &= ~(STATUS_ASSOCIATING |
+ STATUS_AUTH |
+ STATUS_ASSOCIATED);
+
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+ queue_work(priv->workqueue, &priv->request_scan);
+ notify_wx_assoc_event(priv);
+ break;
+ }
+
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "authenticated: '%s' " MAC_FMT "\n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid));
+ break;
+ }
+
+ case CMAS_INIT: {
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "disassociated: '%s' " MAC_FMT " \n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid));
+
+ priv->status &= ~(
+ STATUS_DISASSOCIATING |
+ STATUS_ASSOCIATING |
+ STATUS_ASSOCIATED |
+ STATUS_AUTH);
+
+ netif_stop_queue(priv->net_dev);
+ if (!(priv->status & STATUS_ROAMING)) {
+ netif_carrier_off(priv->net_dev);
+ notify_wx_assoc_event(priv);
+
+ /* Cancel any queued work ... */
+ cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->adhoc_check);
+
+ /* Queue up another scan... */
+ queue_work(priv->workqueue,
+ &priv->request_scan);
+
+ cancel_delayed_work(&priv->gather_stats);
+ } else {
+ priv->status |= STATUS_ROAMING;
+ queue_work(priv->workqueue,
+ &priv->request_scan);
+ }
+
+ ipw_reset_stats(priv);
+ break;
+ }
+
+ default:
+ IPW_ERROR("assoc: unknown (%d)\n",
+ assoc->state);
+ break;
+ }
+
+ break;
+ }
+
+ case HOST_NOTIFICATION_STATUS_AUTHENTICATE: {
+ struct notif_authenticate *auth = ¬if->u.auth;
+ switch (auth->state) {
+ case CMAS_AUTHENTICATED:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE,
+ "authenticated: '%s' " MAC_FMT " \n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid));
+ priv->status |= STATUS_AUTH;
+ break;
+
+ case CMAS_INIT:
+ if (priv->status & STATUS_AUTH) {
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "authentication failed (0x%04X): %s\n",
+ ntohs(auth->status),
+ ipw_get_status_code(ntohs(auth->status)));
+ }
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "deauthenticated: '%s' " MAC_FMT "\n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid));
+
+ priv->status &= ~(STATUS_ASSOCIATING |
+ STATUS_AUTH |
+ STATUS_ASSOCIATED);
+
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+ queue_work(priv->workqueue, &priv->request_scan);
+ notify_wx_assoc_event(priv);
+ break;
+
+ case CMAS_TX_AUTH_SEQ_1:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "AUTH_SEQ_1\n");
+ break;
+ case CMAS_RX_AUTH_SEQ_2:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "AUTH_SEQ_2\n");
+ break;
+ case CMAS_AUTH_SEQ_1_PASS:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "AUTH_SEQ_1_PASS\n");
+ break;
+ case CMAS_AUTH_SEQ_1_FAIL:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "AUTH_SEQ_1_FAIL\n");
+ break;
+ case CMAS_TX_AUTH_SEQ_3:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "AUTH_SEQ_3\n");
+ break;
+ case CMAS_RX_AUTH_SEQ_4:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "RX_AUTH_SEQ_4\n");
+ break;
+ case CMAS_AUTH_SEQ_2_PASS:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "AUTH_SEQ_2_PASS\n");
+ break;
+ case CMAS_AUTH_SEQ_2_FAIL:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "AUT_SEQ_2_FAIL\n");
+ break;
+ case CMAS_TX_ASSOC:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "TX_ASSOC\n");
+ break;
+ case CMAS_RX_ASSOC_RESP:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "RX_ASSOC_RESP\n");
+ break;
+ case CMAS_ASSOCIATED:
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+ "ASSOCIATED\n");
+ break;
+ default:
+ IPW_DEBUG_NOTIF("auth: failure - %d\n", auth->state);
+ break;
+ }
+ break;
+ }
+
+ case HOST_NOTIFICATION_STATUS_SCAN_CHANNEL_RESULT: {
+ struct notif_channel_result *x = ¬if->u.channel_result;
+
+ if (notif->size == sizeof(*x)) {
+ IPW_DEBUG_SCAN("Scan result for channel %d\n",
+ x->channel_num);
+ } else {
+ IPW_DEBUG_SCAN("Scan result of wrong size %d "
+ "(should be %d)\n",
+ notif->size,sizeof(*x));
+ }
+ break;
+ }
+
+ case HOST_NOTIFICATION_STATUS_SCAN_COMPLETED: {
+ struct notif_scan_complete* x = ¬if->u.scan_complete;
+ if (notif->size == sizeof(*x)) {
+ IPW_DEBUG_SCAN("Scan completed: type %d, %d channels, "
+ "%d status\n",
+ x->scan_type,
+ x->num_channels,
+ x->status);
+ } else {
+ IPW_ERROR("Scan completed of wrong size %d "
+ "(should be %d)\n",
+ notif->size,sizeof(*x));
+ }
+
+ priv->status &= ~(STATUS_SCANNING | STATUS_SCAN_ABORTING);
+
+ cancel_delayed_work(&priv->scan_check);
+
+ if (!(priv->status & (STATUS_ASSOCIATED |
+ STATUS_ASSOCIATING |
+ STATUS_ROAMING |
+ STATUS_DISASSOCIATING)))
+ queue_work(priv->workqueue, &priv->associate);
+ else if (priv->status & STATUS_ROAMING) {
+ /* If a scan completed and we are in roam mode, then
+ * the scan that completed was the one requested as a
+ * result of entering roam... so, schedule the
+ * roam work */
+ queue_work(priv->workqueue, &priv->roam);
+ } else if (priv->status & STATUS_SCAN_PENDING)
+ queue_work(priv->workqueue, &priv->request_scan);
+
+ priv->ieee->scans++;
+ break;
+ }
+
+ case HOST_NOTIFICATION_STATUS_FRAG_LENGTH: {
+ struct notif_frag_length *x = ¬if->u.frag_len;
+
+ if (notif->size == sizeof(*x)) {
+ IPW_ERROR("Frag length: %d\n", x->frag_length);
+ } else {
+ IPW_ERROR("Frag length of wrong size %d "
+ "(should be %d)\n",
+ notif->size, sizeof(*x));
+ }
+ break;
+ }
+
+ case HOST_NOTIFICATION_STATUS_LINK_DETERIORATION: {
+ struct notif_link_deterioration *x =
+ ¬if->u.link_deterioration;
+ if (notif->size==sizeof(*x)) {
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE,
+ "link deterioration: '%s' " MAC_FMT " \n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid));
+ memcpy(&priv->last_link_deterioration, x, sizeof(*x));
+ } else {
+ IPW_ERROR("Link Deterioration of wrong size %d "
+ "(should be %d)\n",
+ notif->size,sizeof(*x));
+ }
+ break;
+ }
+
+ case HOST_NOTIFICATION_DINO_CONFIG_RESPONSE: {
+ IPW_ERROR("Dino config\n");
+ if (priv->hcmd && priv->hcmd->cmd == HOST_CMD_DINO_CONFIG) {
+ /* TODO: Do anything special? */
+ } else {
+ IPW_ERROR("Unexpected DINO_CONFIG_RESPONSE\n");
+ }
+ break;
+ }
+
+ case HOST_NOTIFICATION_STATUS_BEACON_STATE: {
+ struct notif_beacon_state *x = ¬if->u.beacon_state;
+ if (notif->size != sizeof(*x)) {
+ IPW_ERROR("Beacon state of wrong size %d (should "
+ "be %d)\n", notif->size, sizeof(*x));
+ break;
+ }
+
+ if (x->state == HOST_NOTIFICATION_STATUS_BEACON_MISSING) {
+ if (priv->status & STATUS_SCANNING) {
+ /* Stop scan to keep fw from getting
+ * stuck... */
+ queue_work(priv->workqueue,
+ &priv->abort_scan);
+ }
+
+ if (x->number > priv->missed_beacon_threshold &&
+ priv->status & STATUS_ASSOCIATED) {
+ IPW_DEBUG(IPW_DL_INFO | IPW_DL_NOTIF |
+ IPW_DL_STATE,
+ "Missed beacon: %d - disassociate\n",
+ x->number);
+ queue_work(priv->workqueue,
+ &priv->disassociate);
+ } else if (x->number > priv->roaming_threshold) {
+ IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE,
+ "Missed beacon: %d - initiate "
+ "roaming\n",
+ x->number);
+ queue_work(priv->workqueue,
+ &priv->roam);
+ } else {
+ IPW_DEBUG_NOTIF("Missed beacon: %d\n",
+ x->number);
+ }
+
+ priv->notif_missed_beacons = x->number;
+
+ }
+
+
+ break;
+ }
+
+ case HOST_NOTIFICATION_STATUS_TGI_TX_KEY: {
+ struct notif_tgi_tx_key *x = ¬if->u.tgi_tx_key;
+ if (notif->size==sizeof(*x)) {
+ IPW_ERROR("TGi Tx Key: state 0x%02x sec type "
+ "0x%02x station %d\n",
+ x->key_state,x->security_type,
+ x->station_index);
+ break;
+ }
+
+ IPW_ERROR("TGi Tx Key of wrong size %d (should be %d)\n",
+ notif->size,sizeof(*x));
+ break;
+ }
+
+ case HOST_NOTIFICATION_CALIB_KEEP_RESULTS: {
+ struct notif_calibration *x = ¬if->u.calibration;
+
+ if (notif->size == sizeof(*x)) {
+ memcpy(&priv->calib, x, sizeof(*x));
+ IPW_DEBUG_INFO("TODO: Calibration\n");
+ break;
+ }
+
+ IPW_ERROR("Calibration of wrong size %d (should be %d)\n",
+ notif->size,sizeof(*x));
+ break;
+ }
+
+ case HOST_NOTIFICATION_NOISE_STATS: {
+ if (notif->size == sizeof(u32)) {
+ priv->last_noise = (u8)(notif->u.noise.value & 0xff);
+ average_add(&priv->average_noise, priv->last_noise);
+ break;
+ }
+
+ IPW_ERROR("Noise stat is wrong size %d (should be %d)\n",
+ notif->size, sizeof(u32));
+ break;
+ }
+
+ default:
+ IPW_ERROR("Unknown notification: "
+ "subtype=%d,flags=0x%2x,size=%d\n",
+ notif->subtype, notif->flags, notif->size);
+ }
+}
+
+/**
+ * Destroys all DMA structures and initialise them again
+ *
+ * @param priv
+ * @return error code
+ */
+static int ipw_queue_reset(struct ipw_priv *priv)
+{
+ int rc = 0;
+ /** @todo customize queue sizes */
+ int nTx = 64, nTxCmd = 8;
+ ipw_tx_queue_free(priv);
+ /* Tx CMD queue */
+ rc = ipw_queue_tx_init(priv, &priv->txq_cmd, nTxCmd,
+ CX2_TX_CMD_QUEUE_READ_INDEX,
+ CX2_TX_CMD_QUEUE_WRITE_INDEX,
+ CX2_TX_CMD_QUEUE_BD_BASE,
+ CX2_TX_CMD_QUEUE_BD_SIZE);
+ if (rc) {
+ IPW_ERROR("Tx Cmd queue init failed\n");
+ goto error;
+ }
+ /* Tx queue(s) */
+ rc = ipw_queue_tx_init(priv, &priv->txq[0], nTx,
+ CX2_TX_QUEUE_0_READ_INDEX,
+ CX2_TX_QUEUE_0_WRITE_INDEX,
+ CX2_TX_QUEUE_0_BD_BASE,
+ CX2_TX_QUEUE_0_BD_SIZE);
+ if (rc) {
+ IPW_ERROR("Tx 0 queue init failed\n");
+ goto error;
+ }
+ rc = ipw_queue_tx_init(priv, &priv->txq[1], nTx,
+ CX2_TX_QUEUE_1_READ_INDEX,
+ CX2_TX_QUEUE_1_WRITE_INDEX,
+ CX2_TX_QUEUE_1_BD_BASE,
+ CX2_TX_QUEUE_1_BD_SIZE);
+ if (rc) {
+ IPW_ERROR("Tx 1 queue init failed\n");
+ goto error;
+ }
+ rc = ipw_queue_tx_init(priv, &priv->txq[2], nTx,
+ CX2_TX_QUEUE_2_READ_INDEX,
+ CX2_TX_QUEUE_2_WRITE_INDEX,
+ CX2_TX_QUEUE_2_BD_BASE,
+ CX2_TX_QUEUE_2_BD_SIZE);
+ if (rc) {
+ IPW_ERROR("Tx 2 queue init failed\n");
+ goto error;
+ }
+ rc = ipw_queue_tx_init(priv, &priv->txq[3], nTx,
+ CX2_TX_QUEUE_3_READ_INDEX,
+ CX2_TX_QUEUE_3_WRITE_INDEX,
+ CX2_TX_QUEUE_3_BD_BASE,
+ CX2_TX_QUEUE_3_BD_SIZE);
+ if (rc) {
+ IPW_ERROR("Tx 3 queue init failed\n");
+ goto error;
+ }
+ /* statistics */
+ priv->rx_bufs_min = 0;
+ priv->rx_pend_max = 0;
+ return rc;
+
+ error:
+ ipw_tx_queue_free(priv);
+ return rc;
+}
+
+/**
+ * Reclaim Tx queue entries no more used by NIC.
+ *
+ * When FW adwances 'R' index, all entries between old and
+ * new 'R' index need to be reclaimed. As result, some free space
+ * forms. If there is enough free space (> low mark), wake Tx queue.
+ *
+ * @note Need to protect against garbage in 'R' index
+ * @param priv
+ * @param txq
+ * @param qindex
+ * @return Number of used entries remains in the queue
+ */
+static int ipw_queue_tx_reclaim(struct ipw_priv *priv,
+ struct clx2_tx_queue *txq, int qindex)
+{
+ u32 hw_tail;
+ int used;
+ struct clx2_queue *q = &txq->q;
+
+ hw_tail = ipw_read32(priv, q->reg_r);
+ if (hw_tail >= q->n_bd) {
+ IPW_ERROR
+ ("Read index for DMA queue (%d) is out of range [0-%d)\n",
+ hw_tail, q->n_bd);
+ goto done;
+ }
+ for (; q->last_used != hw_tail;
+ q->last_used = ipw_queue_inc_wrap(q->last_used, q->n_bd)) {
+ ipw_queue_tx_free_tfd(priv, txq);
+ priv->tx_packets++;
+ }
+ done:
+ if (ipw_queue_space(q) > q->low_mark && qindex >= 0) {
+ __maybe_wake_tx(priv);
+ }
+ used = q->first_empty - q->last_used;
+ if (used < 0)
+ used += q->n_bd;
+
+ return used;
+}
+
+static int ipw_queue_tx_hcmd(struct ipw_priv *priv, int hcmd, void *buf,
+ int len, int sync)
+{
+ struct clx2_tx_queue *txq = &priv->txq_cmd;
+ struct clx2_queue *q = &txq->q;
+ struct tfd_frame *tfd;
+
+ if (ipw_queue_space(q) < (sync ? 1 : 2)) {
+ IPW_ERROR("No space for Tx\n");
+ return -EBUSY;
+ }
+
+ tfd = &txq->bd[q->first_empty];
+ txq->txb[q->first_empty] = NULL;
+
+ memset(tfd, 0, sizeof(*tfd));
+ tfd->control_flags.message_type = TX_HOST_COMMAND_TYPE;
+ tfd->control_flags.control_bits = TFD_NEED_IRQ_MASK;
+ priv->hcmd_seq++;
+ tfd->u.cmd.index = hcmd;
+ tfd->u.cmd.length = len;
+ memcpy(tfd->u.cmd.payload, buf, len);
+ q->first_empty = ipw_queue_inc_wrap(q->first_empty, q->n_bd);
+ ipw_write32(priv, q->reg_w, q->first_empty);
+ _ipw_read32(priv, 0x90);
+
+ return 0;
+}
+
+
+
+/*
+ * Rx theory of operation
+ *
+ * The host allocates 32 DMA target addresses and passes the host address
+ * to the firmware at register CX2_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
+ * 0 to 31
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two index registers for managing the Rx buffers.
+ *
+ * The READ index maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ index is managed by the firmware once the card is enabled.
+ *
+ * The WRITE index maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization the host sets up the READ queue position to the first
+ * INDEX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer it will advance the READ index
+ * and fire the RX interrupt. The driver can then query the READ index and
+ * process as many packets as possible, moving the WRITE index forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in ipw->rxq->rx_free. When
+ * ipw->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ * to replensish the ipw->rxq->rx_free.
+ * + In ipw_rx_queue_replenish (scheduled) if 'processed' != 'read' then the
+ * ipw->rxq is replenished and the READ INDEX is updated (updating the
+ * 'processed' and 'read' driver indexes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ * detached from the ipw->rxq. The driver 'processed' index is updated.
+ * + The Host/Firmware ipw->rxq is replenished at tasklet time from the rx_free
+ * list. If there are no allocated buffers in ipw->rxq->rx_free, the READ
+ * INDEX is not incremented and ipw->status(RX_STALLED) is set. If there
+ * were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * ipw_rx_queue_alloc() Allocates rx_free
+ * ipw_rx_queue_replenish() Replenishes rx_free list from rx_used, and calls
+ * ipw_rx_queue_restock
+ * ipw_rx_queue_restock() Moves available buffers from rx_free into Rx
+ * queue, updates firmware pointers, and updates
+ * the WRITE index. If insufficient rx_free buffers
+ * are available, schedules ipw_rx_queue_replenish
+ *
+ * -- enable interrupts --
+ * ISR - ipw_rx() Detach ipw_rx_mem_buffers from pool up to the
+ * READ INDEX, detaching the SKB from the pool.
+ * Moves the packet buffer from queue to rx_used.
+ * Calls ipw_rx_queue_restock to refill any empty
+ * slots.
+ * ...
+ *
+ */
+
+/*
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can pulling from rx_free.
+ *
+ * This moves the 'write' index forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+static void ipw_rx_queue_restock(struct ipw_priv *priv)
+{
+ struct ipw_rx_queue *rxq = priv->rxq;
+ struct list_head *element;
+ struct ipw_rx_mem_buffer *rxb;
+ unsigned long flags;
+ int write;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ write = rxq->write;
+ while ((rxq->write != rxq->processed) && (rxq->free_count)) {
+ element = rxq->rx_free.next;
+ rxb = list_entry(element, struct ipw_rx_mem_buffer, list);
+ list_del(element);
+
+ ipw_write32(priv, CX2_RFDS_TABLE_LOWER + rxq->write * RFD_SIZE,
+ rxb->dma_addr);
+ rxq->queue[rxq->write] = rxb;
+ rxq->write = (rxq->write + 1) % RX_QUEUE_SIZE;
+ rxq->free_count--;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ /* If the pre-allocated buffer pool is dropping low, schedule to
+ * refill it */
+ if (rxq->free_count <= RX_LOW_WATERMARK)
+ queue_work(priv->workqueue, &priv->rx_replenish);
+
+ /* If we've added more space for the firmware to place data, tell it */
+ if (write != rxq->write)
+ ipw_write32(priv, CX2_RX_WRITE_INDEX, rxq->write);
+}
+
+/*
+ * Move all used packet from rx_used to rx_free, allocating a new SKB for each.
+ * Also restock the Rx queue via ipw_rx_queue_restock.
+ *
+ * This is called as a scheduled work item (except for during intialization)
+ */
+static void ipw_rx_queue_replenish(void *data)
+{
+ struct ipw_priv *priv = data;
+ struct ipw_rx_queue *rxq = priv->rxq;
+ struct list_head *element;
+ struct ipw_rx_mem_buffer *rxb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ while (!list_empty(&rxq->rx_used)) {
+ element = rxq->rx_used.next;
+ rxb = list_entry(element, struct ipw_rx_mem_buffer, list);
+ rxb->skb = alloc_skb(CX2_RX_BUF_SIZE, GFP_ATOMIC);
+ if (!rxb->skb) {
+ printk(KERN_CRIT "%s: Can not allocate SKB buffers.\n",
+ priv->net_dev->name);
+ /* We don't reschedule replenish work here -- we will
+ * call the restock method and if it still needs
+ * more buffers it will schedule replenish */
+ break;
+ }
+ list_del(element);
+
+ rxb->rxb = (struct ipw_rx_buffer *)rxb->skb->data;
+ rxb->dma_addr = pci_map_single(
+ priv->pci_dev, rxb->skb->data, CX2_RX_BUF_SIZE,
+ PCI_DMA_FROMDEVICE);
+
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ ipw_rx_queue_restock(priv);
+}
+
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have it's SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+static void ipw_rx_queue_free(struct ipw_priv *priv,
+ struct ipw_rx_queue *rxq)
+{
+ int i;
+
+ if (!rxq)
+ return;
+
+ for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+ if (rxq->pool[i].skb != NULL) {
+ pci_unmap_single(priv->pci_dev, rxq->pool[i].dma_addr,
+ CX2_RX_BUF_SIZE,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rxq->pool[i].skb);
+ }
+ }
+
+ kfree(rxq);
+}
+
+static struct ipw_rx_queue *ipw_rx_queue_alloc(struct ipw_priv *priv)
+{
+ struct ipw_rx_queue *rxq;
+ int i;
+
+ rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL);
+ memset(rxq, 0, sizeof(*rxq));
+ spin_lock_init(&rxq->lock);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->processed = RX_QUEUE_SIZE - 1;
+ rxq->free_count = 0;
+
+ return rxq;
+}
+
+static int ipw_is_rate_in_mask(struct ipw_priv *priv, int ieee_mode, u8 rate)
+{
+ rate &= ~IEEE80211_BASIC_RATE_MASK;
+ if (ieee_mode == IEEE_A) {
+ switch (rate) {
+ case IEEE80211_OFDM_RATE_6MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_6MB_MASK ?
+ 1 : 0;
+ case IEEE80211_OFDM_RATE_9MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_9MB_MASK ?
+ 1 : 0;
+ case IEEE80211_OFDM_RATE_12MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_12MB_MASK ?
+ 1 : 0;
+ case IEEE80211_OFDM_RATE_18MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_18MB_MASK ?
+ 1 : 0;
+ case IEEE80211_OFDM_RATE_24MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_24MB_MASK ?
+ 1 : 0;
+ case IEEE80211_OFDM_RATE_36MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_36MB_MASK ?
+ 1 : 0;
+ case IEEE80211_OFDM_RATE_48MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_48MB_MASK ?
+ 1 : 0;
+ case IEEE80211_OFDM_RATE_54MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_54MB_MASK ?
+ 1 : 0;
+ default:
+ return 0;
+ }
+ }
+
+ /* B and G mixed */
+ switch (rate) {
+ case IEEE80211_CCK_RATE_1MB:
+ return priv->rates_mask & IEEE80211_CCK_RATE_1MB_MASK ? 1 : 0;
+ case IEEE80211_CCK_RATE_2MB:
+ return priv->rates_mask & IEEE80211_CCK_RATE_2MB_MASK ? 1 : 0;
+ case IEEE80211_CCK_RATE_5MB:
+ return priv->rates_mask & IEEE80211_CCK_RATE_5MB_MASK ? 1 : 0;
+ case IEEE80211_CCK_RATE_11MB:
+ return priv->rates_mask & IEEE80211_CCK_RATE_11MB_MASK ? 1 : 0;
+ }
+
+ /* If we are limited to B modulations, bail at this point */
+ if (ieee_mode == IEEE_B)
+ return 0;
+
+ /* G */
+ switch (rate) {
+ case IEEE80211_OFDM_RATE_6MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_6MB_MASK ? 1 : 0;
+ case IEEE80211_OFDM_RATE_9MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_9MB_MASK ? 1 : 0;
+ case IEEE80211_OFDM_RATE_12MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_12MB_MASK ? 1 : 0;
+ case IEEE80211_OFDM_RATE_18MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_18MB_MASK ? 1 : 0;
+ case IEEE80211_OFDM_RATE_24MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_24MB_MASK ? 1 : 0;
+ case IEEE80211_OFDM_RATE_36MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_36MB_MASK ? 1 : 0;
+ case IEEE80211_OFDM_RATE_48MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_48MB_MASK ? 1 : 0;
+ case IEEE80211_OFDM_RATE_54MB:
+ return priv->rates_mask & IEEE80211_OFDM_RATE_54MB_MASK ? 1 : 0;
+ }
+
+ return 0;
+}
+
+static int ipw_compatible_rates(struct ipw_priv *priv,
+ const struct ieee80211_network *network,
+ struct ipw_supported_rates *rates)
+{
+ int num_rates, i;
+
+ memset(rates, 0, sizeof(*rates));
+ num_rates = min(network->rates_len, (u8)IPW_MAX_RATES);
+ rates->num_rates = 0;
+ for (i = 0; i < num_rates; i++) {
+ if (!ipw_is_rate_in_mask(priv, network->mode, network->rates[i])) {
+ IPW_DEBUG_SCAN("Rate %02X masked : 0x%08X\n",
+ network->rates[i], priv->rates_mask);
+ continue;
+ }
+
+ rates->supported_rates[rates->num_rates++] = network->rates[i];
+ }
+
+ num_rates = min(network->rates_ex_len, (u8)(IPW_MAX_RATES - num_rates));
+ for (i = 0; i < num_rates; i++) {
+ if (!ipw_is_rate_in_mask(priv, network->mode, network->rates_ex[i])) {
+ IPW_DEBUG_SCAN("Rate %02X masked : 0x%08X\n",
+ network->rates_ex[i], priv->rates_mask);
+ continue;
+ }
+
+ rates->supported_rates[rates->num_rates++] = network->rates_ex[i];
+ }
+
+ return rates->num_rates;
+}
+
+static inline void ipw_copy_rates(struct ipw_supported_rates *dest,
+ const struct ipw_supported_rates *src)
+{
+ u8 i;
+ for (i = 0; i < src->num_rates; i++)
+ dest->supported_rates[i] = src->supported_rates[i];
+ dest->num_rates = src->num_rates;
+}
+
+/* TODO: Look at sniffed packets in the air to determine if the basic rate
+ * mask should ever be used -- right now all callers to add the scan rates are
+ * set with the modulation = CCK, so BASIC_RATE_MASK is never set... */
+static void ipw_add_cck_scan_rates(struct ipw_supported_rates *rates,
+ u8 modulation, u32 rate_mask)
+{
+ u8 basic_mask = (IEEE80211_OFDM_MODULATION == modulation) ?
+ IEEE80211_BASIC_RATE_MASK : 0;
+
+ if (rate_mask & IEEE80211_CCK_RATE_1MB_MASK)
+ rates->supported_rates[rates->num_rates++] =
+ IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+
+ if (rate_mask & IEEE80211_CCK_RATE_2MB_MASK)
+ rates->supported_rates[rates->num_rates++] =
+ IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+
+ if (rate_mask & IEEE80211_CCK_RATE_5MB_MASK)
+ rates->supported_rates[rates->num_rates++] = basic_mask |
+ IEEE80211_CCK_RATE_5MB;
+
+ if (rate_mask & IEEE80211_CCK_RATE_11MB_MASK)
+ rates->supported_rates[rates->num_rates++] = basic_mask |
+ IEEE80211_CCK_RATE_11MB;
+}
+
+static void ipw_add_ofdm_scan_rates(struct ipw_supported_rates *rates,
+ u8 modulation, u32 rate_mask)
+{
+ u8 basic_mask = (IEEE80211_OFDM_MODULATION == modulation) ?
+ IEEE80211_BASIC_RATE_MASK : 0;
+
+ if (rate_mask & IEEE80211_OFDM_RATE_6MB_MASK)
+ rates->supported_rates[rates->num_rates++] = basic_mask |
+ IEEE80211_OFDM_RATE_6MB;
+
+ if (rate_mask & IEEE80211_OFDM_RATE_9MB_MASK)
+ rates->supported_rates[rates->num_rates++] =
+ IEEE80211_OFDM_RATE_9MB;
+
+ if (rate_mask & IEEE80211_OFDM_RATE_12MB_MASK)
+ rates->supported_rates[rates->num_rates++] = basic_mask |
+ IEEE80211_OFDM_RATE_12MB;
+
+ if (rate_mask & IEEE80211_OFDM_RATE_18MB_MASK)
+ rates->supported_rates[rates->num_rates++] =
+ IEEE80211_OFDM_RATE_18MB;
+
+ if (rate_mask & IEEE80211_OFDM_RATE_24MB_MASK)
+ rates->supported_rates[rates->num_rates++] = basic_mask |
+ IEEE80211_OFDM_RATE_24MB;
+
+ if (rate_mask & IEEE80211_OFDM_RATE_36MB_MASK)
+ rates->supported_rates[rates->num_rates++] =
+ IEEE80211_OFDM_RATE_36MB;
+
+ if (rate_mask & IEEE80211_OFDM_RATE_48MB_MASK)
+ rates->supported_rates[rates->num_rates++] =
+ IEEE80211_OFDM_RATE_48MB;
+
+ if (rate_mask & IEEE80211_OFDM_RATE_54MB_MASK)
+ rates->supported_rates[rates->num_rates++] =
+ IEEE80211_OFDM_RATE_54MB;
+}
+
+struct ipw_network_match {
+ struct ieee80211_network *network;
+ struct ipw_supported_rates rates;
+};
+
+static int ipw_best_network(
+ struct ipw_priv *priv,
+ struct ipw_network_match *match,
+ struct ieee80211_network *network,
+ int roaming)
+{
+ struct ipw_supported_rates rates;
+
+ /* Verify that this network's capability is compatible with the
+ * current mode (AdHoc or Infrastructure) */
+ if ((priv->ieee->iw_mode == IW_MODE_INFRA &&
+ !(network->capability & WLAN_CAPABILITY_BSS)) ||
+ (priv->ieee->iw_mode == IW_MODE_ADHOC &&
+ !(network->capability & WLAN_CAPABILITY_IBSS))) {
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded due to "
+ "capability mismatch.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid));
+ return 0;
+ }
+
+ /* If we do not have an ESSID for this AP, we can not associate with
+ * it */
+ if (network->flags & NETWORK_EMPTY_ESSID) {
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
+ "because of hidden ESSID.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid));
+ return 0;
+ }
+
+ if (unlikely(roaming)) {
+ /* If we are roaming, then ensure check if this is a valid
+ * network to try and roam to */
+ if ((network->ssid_len != match->network->ssid_len) ||
+ memcmp(network->ssid, match->network->ssid,
+ network->ssid_len)) {
+ IPW_DEBUG_ASSOC("Netowrk '%s (" MAC_FMT ")' excluded "
+ "because of non-network ESSID.\n",
+ escape_essid(network->ssid,
+ network->ssid_len),
+ MAC_ARG(network->bssid));
+ return 0;
+ }
+ } else {
+ /* If an ESSID has been configured then compare the broadcast
+ * ESSID to ours */
+ if ((priv->config & CFG_STATIC_ESSID) &&
+ ((network->ssid_len != priv->essid_len) ||
+ memcmp(network->ssid, priv->essid,
+ min(network->ssid_len, priv->essid_len)))) {
+ char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+ strncpy(escaped, escape_essid(
+ network->ssid, network->ssid_len),
+ sizeof(escaped));
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
+ "because of ESSID mismatch: '%s'.\n",
+ escaped, MAC_ARG(network->bssid),
+ escape_essid(priv->essid, priv->essid_len));
+ return 0;
+ }
+ }
+
+ /* If the old network rate is better than this one, don't bother
+ * testing everything else. */
+ if (match->network && match->network->stats.rssi >
+ network->stats.rssi) {
+ char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+ strncpy(escaped,
+ escape_essid(network->ssid, network->ssid_len),
+ sizeof(escaped));
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded because "
+ "'%s (" MAC_FMT ")' has a stronger signal.\n",
+ escaped, MAC_ARG(network->bssid),
+ escape_essid(match->network->ssid,
+ match->network->ssid_len),
+ MAC_ARG(match->network->bssid));
+ return 0;
+ }
+
+ /* If this network has already had an association attempt within the
+ * last 3 seconds, do not try and associate again... */
+ if (network->last_associate &&
+ time_after(network->last_associate + (HZ * 5UL), jiffies)) {
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
+ "because of storming (%lu since last "
+ "assoc attempt).\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid),
+ (jiffies - network->last_associate) / HZ);
+ return 0;
+ }
+
+ /* Now go through and see if the requested network is valid... */
+ if (priv->ieee->scan_age != 0 &&
+ jiffies - network->last_scanned > priv->ieee->scan_age) {
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
+ "because of age: %lums.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid),
+ (jiffies - network->last_scanned) / (HZ / 100));
+ return 0;
+ }
+
+ if ((priv->config & CFG_STATIC_CHANNEL) &&
+ (network->channel != priv->channel)) {
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
+ "because of channel mismatch: %d != %d.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid),
+ network->channel, priv->channel);
+ return 0;
+ }
+
+ /* Verify privacy compatability */
+ if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) !=
+ ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) {
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
+ "because of privacy mismatch: %s != %s.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid),
+ priv->capability & CAP_PRIVACY_ON ? "on" :
+ "off",
+ network->capability &
+ WLAN_CAPABILITY_PRIVACY ?"on" : "off");
+ return 0;
+ }
+
+ if ((priv->config & CFG_STATIC_BSSID) &&
+ memcmp(network->bssid, priv->bssid, ETH_ALEN)) {
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
+ "because of BSSID mismatch: " MAC_FMT ".\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid),
+ MAC_ARG(priv->bssid));
+ return 0;
+ }
+
+ /* Filter out any incompatible freq / mode combinations */
+ if (!ieee80211_is_valid_mode(priv->ieee, network->mode)) {
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
+ "because of invalid frequency/mode "
+ "combination.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid));
+ return 0;
+ }
+
+ ipw_compatible_rates(priv, network, &rates);
+ if (rates.num_rates == 0) {
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
+ "because of no compatible rates.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid));
+ return 0;
+ }
+
+ /* TODO: Perform any further minimal comparititive tests. We do not
+ * want to put too much policy logic here; intelligent scan selection
+ * should occur within a generic IEEE 802.11 user space tool. */
+
+ /* Set up 'new' AP to this network */
+ ipw_copy_rates(&match->rates, &rates);
+ match->network = network;
+
+ IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' is a viable match.\n",
+ escape_essid(network->ssid, network->ssid_len),
+ MAC_ARG(network->bssid));
+
+ return 1;
+}
+
+
+static void ipw_adhoc_create(struct ipw_priv *priv,
+ struct ieee80211_network *network)
+{
+ /*
+ * For the purposes of scanning, we can set our wireless mode
+ * to trigger scans across combinations of bands, but when it
+ * comes to creating a new ad-hoc network, we have tell the FW
+ * exactly which band to use.
+ *
+ * We also have the possibility of an invalid channel for the
+ * chossen band. Attempting to create a new ad-hoc network
+ * with an invalid channel for wireless mode will trigger a
+ * FW fatal error.
+ */
+ network->mode = is_valid_channel(priv->ieee->mode, priv->channel);
+ if (network->mode) {
+ network->channel = priv->channel;
+ } else {
+ IPW_WARNING("Overriding invalid channel\n");
+ if (priv->ieee->mode & IEEE_A) {
+ network->mode = IEEE_A;
+ priv->channel = band_a_active_channel[0];
+ } else if (priv->ieee->mode & IEEE_G) {
+ network->mode = IEEE_G;
+ priv->channel = band_b_active_channel[0];
+ } else {
+ network->mode = IEEE_B;
+ priv->channel = band_b_active_channel[0];
+ }
+ }
+
+ network->channel = priv->channel;
+ priv->config |= CFG_ADHOC_PERSIST;
+ ipw_create_bssid(priv, network->bssid);
+ network->ssid_len = priv->essid_len;
+ memcpy(network->ssid, priv->essid, priv->essid_len);
+ memset(&network->stats, 0, sizeof(network->stats));
+ network->capability = WLAN_CAPABILITY_IBSS;
+ if (priv->capability & CAP_PRIVACY_ON)
+ network->capability |= WLAN_CAPABILITY_PRIVACY;
+ network->rates_len = min(priv->rates.num_rates, MAX_RATES_LENGTH);
+ memcpy(network->rates, priv->rates.supported_rates,
+ network->rates_len);
+ network->rates_ex_len = priv->rates.num_rates - network->rates_len;
+ memcpy(network->rates_ex,
+ &priv->rates.supported_rates[network->rates_len],
+ network->rates_ex_len);
+ network->last_scanned = 0;
+ network->flags = 0;
+ network->last_associate = 0;
+ network->time_stamp[0] = 0;
+ network->time_stamp[1] = 0;
+ network->beacon_interval = 100; /* Default */
+ network->listen_interval = 10; /* Default */
+ network->atim_window = 0; /* Default */
+#ifdef CONFIG_IEEE80211_WPA
+ network->wpa_ie_len = 0;
+ network->rsn_ie_len = 0;
+#endif /* CONFIG_IEEE80211_WPA */
+}
+
+static void ipw_send_wep_keys(struct ipw_priv *priv)
+{
+ struct ipw_wep_key *key;
+ int i;
+ struct host_cmd cmd = {
+ .cmd = IPW_CMD_WEP_KEY,
+ .len = sizeof(*key)
+ };
+
+ key = (struct ipw_wep_key *)&cmd.param;
+ key->cmd_id = DINO_CMD_WEP_KEY;
+ key->seq_num = 0;
+
+ for (i = 0; i < 4; i++) {
+ key->key_index = i;
+ if (!(priv->sec.flags & (1 << i))) {
+ key->key_size = 0;
+ } else {
+ key->key_size = priv->sec.key_sizes[i];
+ memcpy(key->key, priv->sec.keys[i], key->key_size);
+ }
+
+ if (ipw_send_cmd(priv, &cmd)) {
+ IPW_ERROR("failed to send WEP_KEY command\n");
+ return;
+ }
+ }
+}
+
+static void ipw_adhoc_check(void *data)
+{
+ struct ipw_priv *priv = data;
+
+ if (priv->missed_adhoc_beacons++ > priv->missed_beacon_threshold &&
+ !(priv->config & CFG_ADHOC_PERSIST)) {
+ IPW_DEBUG_SCAN("Disassociating due to missed beacons\n");
+ ipw_remove_current_network(priv);
+ ipw_disassociate(priv);
+ return;
+ }
+
+ queue_delayed_work(priv->workqueue, &priv->adhoc_check,
+ priv->assoc_request.beacon_interval);
+}
+
+#ifdef CONFIG_IPW_DEBUG
+static void ipw_debug_config(struct ipw_priv *priv)
+{
+ IPW_DEBUG_INFO("Scan completed, no valid APs matched "
+ "[CFG 0x%08X]\n", priv->config);
+ if (priv->config & CFG_STATIC_CHANNEL)
+ IPW_DEBUG_INFO("Channel locked to %d\n",
+ priv->channel);
+ else
+ IPW_DEBUG_INFO("Channel unlocked.\n");
+ if (priv->config & CFG_STATIC_ESSID)
+ IPW_DEBUG_INFO("ESSID locked to '%s'\n",
+ escape_essid(priv->essid,
+ priv->essid_len));
+ else
+ IPW_DEBUG_INFO("ESSID unlocked.\n");
+ if (priv->config & CFG_STATIC_BSSID)
+ IPW_DEBUG_INFO("BSSID locked to %d\n", priv->channel);
+ else
+ IPW_DEBUG_INFO("BSSID unlocked.\n");
+ if (priv->capability & CAP_PRIVACY_ON)
+ IPW_DEBUG_INFO("PRIVACY on\n");
+ else
+ IPW_DEBUG_INFO("PRIVACY off\n");
+ IPW_DEBUG_INFO("RATE MASK: 0x%08X\n", priv->rates_mask);
+}
+#else
+#define ipw_debug_config(x) do {} while (0);
+#endif
+
+static inline void ipw_set_fixed_rate(struct ipw_priv *priv,
+ struct ieee80211_network *network)
+{
+ /* TODO: Verify that this works... */
+ struct ipw_fixed_rate fr = {
+ .tx_rates = priv->rates_mask
+ };
+ u32 reg;
+ u16 mask = 0;
+
+ /* Identify 'current FW band' and match it with the fixed
+ * Tx rates */
+
+ switch (priv->ieee->freq_band) {
+ case IEEE80211_52GHZ_BAND: /* A only */
+ /* IEEE_A */
+ if (priv->rates_mask & ~IEEE80211_OFDM_RATES_MASK) {
+ /* Invalid fixed rate mask */
+ fr.tx_rates = 0;
+ break;
+ }
+
+ fr.tx_rates >>= IEEE80211_OFDM_SHIFT_MASK_A;
+ break;
+
+ default: /* 2.4Ghz or Mixed */
+ /* IEEE_B */
+ if (network->mode == IEEE_B) {
+ if (fr.tx_rates & ~IEEE80211_CCK_RATES_MASK) {
+ /* Invalid fixed rate mask */
+ fr.tx_rates = 0;
+ }
+ break;
+ }
+
+ /* IEEE_G */
+ if (fr.tx_rates & ~(IEEE80211_CCK_RATES_MASK |
+ IEEE80211_OFDM_RATES_MASK)) {
+ /* Invalid fixed rate mask */
+ fr.tx_rates = 0;
+ break;
+ }
+
+ if (IEEE80211_OFDM_RATE_6MB_MASK & fr.tx_rates) {
+ mask |= (IEEE80211_OFDM_RATE_6MB_MASK >> 1);
+ fr.tx_rates &= ~IEEE80211_OFDM_RATE_6MB_MASK;
+ }
+
+ if (IEEE80211_OFDM_RATE_9MB_MASK & fr.tx_rates) {
+ mask |= (IEEE80211_OFDM_RATE_9MB_MASK >> 1);
+ fr.tx_rates &= ~IEEE80211_OFDM_RATE_9MB_MASK;
+ }
+
+ if (IEEE80211_OFDM_RATE_12MB_MASK & fr.tx_rates) {
+ mask |= (IEEE80211_OFDM_RATE_12MB_MASK >> 1);
+ fr.tx_rates &= ~IEEE80211_OFDM_RATE_12MB_MASK;
+ }
+
+ fr.tx_rates |= mask;
+ break;
+ }
+
+ reg = ipw_read32(priv, IPW_MEM_FIXED_OVERRIDE);
+ ipw_write_reg32(priv, reg, *(u32*)&fr);
+}
+
+static int ipw_associate_network(struct ipw_priv *priv,
+ struct ieee80211_network *network,
+ struct ipw_supported_rates *rates,
+ int roaming)
+{
+ int err;
+
+ if (priv->config & CFG_FIXED_RATE)
+ ipw_set_fixed_rate(priv, network);
+
+ if (!(priv->config & CFG_STATIC_ESSID)) {
+ priv->essid_len = min(network->ssid_len,
+ (u8)IW_ESSID_MAX_SIZE);
+ memcpy(priv->essid, network->ssid, priv->essid_len);
+ }
+
+ network->last_associate = jiffies;
+
+ memset(&priv->assoc_request, 0, sizeof(priv->assoc_request));
+ priv->assoc_request.channel = network->channel;
+ if ((priv->capability & CAP_PRIVACY_ON) &&
+ (priv->capability & CAP_SHARED_KEY)) {
+ priv->assoc_request.auth_type = AUTH_SHARED_KEY;
+ priv->assoc_request.auth_key = priv->sec.active_key;
+ } else {
+ priv->assoc_request.auth_type = AUTH_OPEN;
+ priv->assoc_request.auth_key = 0;
+ }
+
+ if (priv->capability & CAP_PRIVACY_ON)
+ ipw_send_wep_keys(priv);
+
+ /*
+ * It is valid for our ieee device to support multiple modes, but
+ * when it comes to associating to a given network we have to choose
+ * just one mode.
+ */
+ if (network->mode & priv->ieee->mode & IEEE_A)
+ priv->assoc_request.ieee_mode = IPW_A_MODE;
+ else if (network->mode & priv->ieee->mode & IEEE_G)
+ priv->assoc_request.ieee_mode = IPW_G_MODE;
+ else if (network->mode & priv->ieee->mode & IEEE_B)
+ priv->assoc_request.ieee_mode = IPW_B_MODE;
+
+ IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, "
+ "802.11%c [%d], enc=%s%s%s%c%c\n",
+ roaming ? "Rea" : "A",
+ escape_essid(priv->essid, priv->essid_len),
+ network->channel,
+ ipw_modes[priv->assoc_request.ieee_mode],
+ rates->num_rates,
+ priv->capability & CAP_PRIVACY_ON ? "on " : "off",
+ priv->capability & CAP_PRIVACY_ON ?
+ (priv->capability & CAP_SHARED_KEY ? "(shared)" :
+ "(open)") : "",
+ priv->capability & CAP_PRIVACY_ON ? " key=" : "",
+ priv->capability & CAP_PRIVACY_ON ?
+ '1' + priv->sec.active_key : '.',
+ priv->capability & CAP_PRIVACY_ON ?
+ '.' : ' ');
+
+ priv->assoc_request.beacon_interval = network->beacon_interval;
+ if ((priv->ieee->iw_mode == IW_MODE_ADHOC) &&
+ (network->time_stamp[0] == 0) &&
+ (network->time_stamp[1] == 0)) {
+ priv->assoc_request.assoc_type = HC_IBSS_START;
+ priv->assoc_request.assoc_tsf_msw = 0;
+ priv->assoc_request.assoc_tsf_lsw = 0;
+ } else {
+ if (unlikely(roaming))
+ priv->assoc_request.assoc_type = HC_REASSOCIATE;
+ else
+ priv->assoc_request.assoc_type = HC_ASSOCIATE;
+ priv->assoc_request.assoc_tsf_msw = network->time_stamp[1];
+ priv->assoc_request.assoc_tsf_lsw = network->time_stamp[0];
+ }
+
+ memcpy(&priv->assoc_request.bssid, network->bssid, ETH_ALEN);
+
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+ memset(&priv->assoc_request.dest, 0xFF, ETH_ALEN);
+ priv->assoc_request.atim_window = network->atim_window;
+ } else {
+ memcpy(&priv->assoc_request.dest, network->bssid,
+ ETH_ALEN);
+ priv->assoc_request.atim_window = 0;
+ }
+
+ priv->assoc_request.capability = network->capability;
+ priv->assoc_request.listen_interval = network->listen_interval;
+
+ err = ipw_send_ssid(priv, priv->essid, priv->essid_len);
+ if (err) {
+ IPW_DEBUG_HC("Attempt to send SSID command failed.\n");
+ return err;
+ }
+
+ rates->ieee_mode = priv->assoc_request.ieee_mode;
+ rates->purpose = IPW_RATE_CONNECT;
+ ipw_send_supported_rates(priv, rates);
+
+ if (priv->assoc_request.ieee_mode == IPW_G_MODE)
+ priv->sys_config.dot11g_auto_detection = 1;
+ else
+ priv->sys_config.dot11g_auto_detection = 0;
+ err = ipw_send_system_config(priv, &priv->sys_config);
+ if (err) {
+ IPW_DEBUG_HC("Attempt to send sys config command failed.\n");
+ return err;
+ }
+
+ IPW_DEBUG_ASSOC("Association sensitivity: %d\n", network->stats.rssi);
+ err = ipw_set_sensitivity(priv, network->stats.rssi);
+ if (err) {
+ IPW_DEBUG_HC("Attempt to send associate command failed.\n");
+ return err;
+ }
+
+ /*
+ * If preemption is enabled, it is possible for the association
+ * to complete before we return from ipw_send_associate. Therefore
+ * we have to be sure and update our priviate data first.
+ */
+ priv->channel = network->channel;
+ memcpy(priv->bssid, network->bssid, ETH_ALEN);
+ priv->status |= STATUS_ASSOCIATING;
+ priv->status &= ~STATUS_SECURITY_UPDATED;
+
+ priv->assoc_network = network;
+
+ err = ipw_send_associate(priv, &priv->assoc_request);
+ if (err) {
+ IPW_DEBUG_HC("Attempt to send associate command failed.\n");
+ return err;
+ }
+
+ IPW_DEBUG(IPW_DL_STATE, "associating: '%s' " MAC_FMT " \n",
+ escape_essid(priv->essid, priv->essid_len),
+ MAC_ARG(priv->bssid));
+
+ return 0;
+}
+
+static void ipw_roam(void *data)
+{
+ struct ipw_priv *priv = data;
+ struct ieee80211_network *network = NULL;
+ struct ipw_network_match match = {
+ .network = priv->assoc_network
+ };
+
+ /* The roaming process is as follows:
+ *
+ * 1. Missed beacon threshold triggers the roaming process by
+ * setting the status ROAM bit and requesting a scan.
+ * 2. When the scan completes, it schedules the ROAM work
+ * 3. The ROAM work looks at all of the known networks for one that
+ * is a better network than the currently associated. If none
+ * found, the ROAM process is over (ROAM bit cleared)
+ * 4. If a better network is found, a disassociation request is
+ * sent.
+ * 5. When the disassociation completes, the roam work is again
+ * scheduled. The second time through, the driver is no longer
+ * associated, and the newly selected network is sent an
+ * association request.
+ * 6. At this point ,the roaming process is complete and the ROAM
+ * status bit is cleared.
+ */
+
+ /* If we are no longer associated, and the roaming bit is no longer
+ * set, then we are not actively roaming, so just return */
+ if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ROAMING)))
+ return;
+
+ if (priv->status & STATUS_ASSOCIATED) {
+ /* First pass through ROAM process -- look for a better
+ * network */
+ u8 rssi = priv->assoc_network->stats.rssi;
+ priv->assoc_network->stats.rssi = -128;
+ list_for_each_entry(network, &priv->ieee->network_list, list) {
+ if (network != priv->assoc_network)
+ ipw_best_network(priv, &match, network, 1);
+ }
+ priv->assoc_network->stats.rssi = rssi;
+
+ if (match.network == priv->assoc_network) {
+ IPW_DEBUG_ASSOC("No better APs in this network to "
+ "roam to.\n");
+ priv->status &= ~STATUS_ROAMING;
+ ipw_debug_config(priv);
+ return;
+ }
+
+ ipw_send_disassociate(priv, 1);
+ priv->assoc_network = match.network;
+
+ return;
+ }
+
+ /* Second pass through ROAM process -- request association */
+ ipw_compatible_rates(priv, priv->assoc_network, &match.rates);
+ ipw_associate_network(priv, priv->assoc_network, &match.rates, 1);
+ priv->status &= ~STATUS_ROAMING;
+}
+
+static void ipw_associate(void *data)
+{
+ struct ipw_priv *priv = data;
+
+ struct ieee80211_network *network = NULL;
+ struct ipw_network_match match = {
+ .network = NULL
+ };
+ struct ipw_supported_rates *rates;
+ struct list_head *element;
+
+ if (!(priv->config & CFG_ASSOCIATE) &&
+ !(priv->config & (CFG_STATIC_ESSID |
+ CFG_STATIC_CHANNEL |
+ CFG_STATIC_BSSID))) {
+ IPW_DEBUG_ASSOC("Not attempting association (associate=0)\n");
+ return;
+ }
+
+ list_for_each_entry(network, &priv->ieee->network_list, list)
+ ipw_best_network(priv, &match, network, 0);
+
+ network = match.network;
+ rates = &match.rates;
+
+ if (network == NULL &&
+ priv->ieee->iw_mode == IW_MODE_ADHOC &&
+ priv->config & CFG_ADHOC_CREATE &&
+ priv->config & CFG_STATIC_ESSID &&
+ !list_empty(&priv->ieee->network_free_list)) {
+ element = priv->ieee->network_free_list.next;
+ network = list_entry(element, struct ieee80211_network,
+ list);
+ ipw_adhoc_create(priv, network);
+ rates = &priv->rates;
+ list_del(element);
+ list_add_tail(&network->list, &priv->ieee->network_list);
+ }
+
+ /* If we reached the end of the list, then we don't have any valid
+ * matching APs */
+ if (!network) {
+ ipw_debug_config(priv);
+
+ queue_delayed_work(priv->workqueue, &priv->request_scan,
+ SCAN_INTERVAL);
+
+ return;
+ }
+
+ ipw_associate_network(priv, network, rates, 0);
+}
+
+static inline void ipw_handle_data_packet(struct ipw_priv *priv,
+ struct ipw_rx_mem_buffer *rxb,
+ struct ieee80211_rx_stats *stats)
+{
+ struct ipw_rx_packet *pkt = (struct ipw_rx_packet *)rxb->skb->data;
+
+ /* We received data from the HW, so stop the watchdog */
+ priv->net_dev->trans_start = jiffies;
+
+ /* We only process data packets if the
+ * interface is open */
+ if (unlikely((pkt->u.frame.length + IPW_RX_FRAME_SIZE) >
+ skb_tailroom(rxb->skb))) {
+ priv->ieee->stats.rx_errors++;
+ priv->wstats.discard.misc++;
+ IPW_DEBUG_DROP("Corruption detected! Oh no!\n");
+ return;
+ } else if (unlikely(!netif_running(priv->net_dev))) {
+ priv->ieee->stats.rx_dropped++;
+ priv->wstats.discard.misc++;
+ IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
+ return;
+ }
+
+ /* Advance skb->data to the start of the actual payload */
+ skb_reserve(rxb->skb, (u32)&pkt->u.frame.data[0] - (u32)pkt);
+
+ /* Set the size of the skb to the size of the frame */
+ skb_put(rxb->skb, pkt->u.frame.length);
+
+ IPW_DEBUG_RX("Rx packet of %d bytes.\n", rxb->skb->len);
+
+ if (!ieee80211_rx(priv->ieee, rxb->skb, stats))
+ priv->ieee->stats.rx_errors++;
+ else /* ieee80211_rx succeeded, so it now owns the SKB */
+ rxb->skb = NULL;
+}
+
+
+/*
+ * Main entry function for recieving a packet with 80211 headers. This
+ * should be called when ever the FW has notified us that there is a new
+ * skb in the recieve queue.
+ */
+static void ipw_rx(struct ipw_priv *priv)
+{
+ struct ipw_rx_mem_buffer *rxb;
+ struct ipw_rx_packet *pkt;
+ struct ieee80211_hdr *header;
+ u32 r, w, i;
+ u8 network_packet;
+
+ r = ipw_read32(priv, CX2_RX_READ_INDEX);
+ w = ipw_read32(priv, CX2_RX_WRITE_INDEX);
+ i = (priv->rxq->processed + 1) % RX_QUEUE_SIZE;
+
+ while (i != r) {
+ rxb = priv->rxq->queue[i];
+#ifdef CONFIG_IPW_DEBUG
+ if (unlikely(rxb == NULL)) {
+ printk(KERN_CRIT "Queue not allocated!\n");
+ break;
+ }
+#endif
+ priv->rxq->queue[i] = NULL;
+
+ pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr,
+ CX2_RX_BUF_SIZE,
+ PCI_DMA_FROMDEVICE);
+
+ pkt = (struct ipw_rx_packet *)rxb->skb->data;
+ IPW_DEBUG_RX("Packet: type=%02X seq=%02X bits=%02X\n",
+ pkt->header.message_type,
+ pkt->header.rx_seq_num,
+ pkt->header.control_bits);
+
+ switch (pkt->header.message_type) {
+ case RX_FRAME_TYPE: /* 802.11 frame */ {
+ struct ieee80211_rx_stats stats = {
+ .rssi = pkt->u.frame.rssi_dbm -
+ IPW_RSSI_TO_DBM,
+ .signal = pkt->u.frame.signal,
+ .rate = pkt->u.frame.rate,
+ .mac_time = jiffies,
+ .received_channel =
+ pkt->u.frame.received_channel,
+ .freq = (pkt->u.frame.control & (1<<0)) ?
+ IEEE80211_24GHZ_BAND : IEEE80211_52GHZ_BAND,
+ .len = pkt->u.frame.length,
+ };
+
+ if (stats.rssi != 0)
+ stats.mask |= IEEE80211_STATMASK_RSSI;
+ if (stats.signal != 0)
+ stats.mask |= IEEE80211_STATMASK_SIGNAL;
+ if (stats.rate != 0)
+ stats.mask |= IEEE80211_STATMASK_RATE;
+
+ priv->rx_packets++;
+
+#ifdef CONFIG_IPW_PROMISC
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+ ipw_handle_data_packet(priv, rxb, &stats);
+ break;
+ }
+#endif
+
+ header = (struct ieee80211_hdr *)(rxb->skb->data +
+ IPW_RX_FRAME_SIZE);
+ /* TODO: Check Ad-Hoc dest/source and make sure
+ * that we are actually parsing these packets
+ * correctly -- we should probably use the
+ * frame control of the packet and disregard
+ * the current iw_mode */
+ switch (priv->ieee->iw_mode) {
+ case IW_MODE_ADHOC:
+ network_packet =
+ !memcmp(header->addr1,
+ priv->net_dev->dev_addr,
+ ETH_ALEN) ||
+ !memcmp(header->addr3,
+ priv->bssid, ETH_ALEN) ||
+ is_broadcast_ether_addr(header->addr1) ||
+ is_multicast_ether_addr(header->addr1);
+ break;
+
+ case IW_MODE_INFRA:
+ default:
+ network_packet =
+ !memcmp(header->addr3,
+ priv->bssid, ETH_ALEN) ||
+ !memcmp(header->addr1,
+ priv->net_dev->dev_addr,
+ ETH_ALEN) ||
+ is_broadcast_ether_addr(header->addr1) ||
+ is_multicast_ether_addr(header->addr1);
+ break;
+ }
+
+ if (network_packet && priv->assoc_network) {
+ priv->assoc_network->stats.rssi = stats.rssi;
+ average_add(&priv->average_rssi,
+ stats.rssi);
+ priv->last_rx_rssi = stats.rssi;
+ }
+
+ IPW_DEBUG_RX("Frame: len=%u\n", pkt->u.frame.length);
+
+ if (pkt->u.frame.length < frame_hdr_len(header)) {
+ IPW_DEBUG_DROP("Received packet is too small. "
+ "Dropping.\n");
+ priv->ieee->stats.rx_errors++;
+ priv->wstats.discard.misc++;
+ break;
+ }
+
+ switch (WLAN_FC_GET_TYPE(header->frame_ctl)) {
+ case IEEE80211_FTYPE_MGMT:
+ ieee80211_rx_mgt(priv->ieee, header, &stats);
+ if (priv->ieee->iw_mode == IW_MODE_ADHOC &&
+ ((WLAN_FC_GET_STYPE(header->frame_ctl) ==
+ IEEE80211_STYPE_PROBE_RESP) ||
+ (WLAN_FC_GET_STYPE(header->frame_ctl) ==
+ IEEE80211_STYPE_BEACON)) &&
+ !memcmp(header->addr3, priv->bssid, ETH_ALEN))
+ ipw_add_station(priv, header->addr2);
+ break;
+
+ case IEEE80211_FTYPE_CTL:
+ break;
+
+ case IEEE80211_FTYPE_DATA:
+ if (network_packet)
+ ipw_handle_data_packet(priv, rxb, &stats);
+ else
+ IPW_DEBUG_DROP("Dropping: " MAC_FMT
+ ", " MAC_FMT ", " MAC_FMT "\n",
+ MAC_ARG(header->addr1), MAC_ARG(header->addr2),
+ MAC_ARG(header->addr3));
+ break;
+ }
+ break;
+ }
+
+ case RX_HOST_NOTIFICATION_TYPE: {
+ IPW_DEBUG_RX("Notification: subtype=%02X flags=%02X size=%d\n",
+ pkt->u.notification.subtype,
+ pkt->u.notification.flags,
+ pkt->u.notification.size);
+ ipw_rx_notification(priv, &pkt->u.notification);
+ break;
+ }
+
+ default:
+ IPW_DEBUG_RX("Bad Rx packet of type %d\n",
+ pkt->header.message_type);
+ break;
+ }
+
+ /* For now we just don't re-use anything. We can tweak this
+ * later to try and re-use notification packets and SKBs that
+ * fail to Rx correctly */
+ if (rxb->skb != NULL) {
+ dev_kfree_skb_any(rxb->skb);
+ rxb->skb = NULL;
+ }
+
+ pci_unmap_single(priv->pci_dev, rxb->dma_addr,
+ CX2_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+ list_add_tail(&rxb->list, &priv->rxq->rx_used);
+
+ i = (i + 1) % RX_QUEUE_SIZE;
+ }
+
+ /* Backtrack one entry */
+ priv->rxq->processed = (i ? i : RX_QUEUE_SIZE) - 1;
+
+ ipw_rx_queue_restock(priv);
+}
+
+static void ipw_abort_scan(struct ipw_priv *priv)
+{
+ int err;
+
+ if (priv->status & STATUS_SCAN_ABORTING) {
+ IPW_DEBUG_HC("Ignoring concurrent scan abort request.\n");
+ return;
+ }
+ priv->status |= STATUS_SCAN_ABORTING;
+
+ err = ipw_send_scan_abort(priv);
+ if (err)
+ IPW_DEBUG_HC("Request to abort scan failed.\n");
+}
+
+static int ipw_request_scan(struct ipw_priv *priv)
+{
+ struct ipw_scan_request_ext scan;
+ int channel_index = 0;
+ int i, err, scan_type;
+
+ if (priv->status & STATUS_EXIT_PENDING) {
+ IPW_DEBUG_SCAN("Aborting scan due to device shutdown\n");
+ priv->status |= STATUS_SCAN_PENDING;
+ return 0;
+ }
+
+ if (priv->status & STATUS_SCANNING) {
+ IPW_DEBUG_HC("Concurrent scan requested. Aborting first.\n");
+ priv->status |= STATUS_SCAN_PENDING;
+ ipw_abort_scan(priv);
+ return 0;
+ }
+
+ if (priv->status & STATUS_SCAN_ABORTING) {
+ IPW_DEBUG_HC("Scan request while abort pending. Queuing.\n");
+ priv->status |= STATUS_SCAN_PENDING;
+ return 0;
+ }
+
+ if (priv->status & STATUS_RF_KILL_MASK) {
+ IPW_DEBUG_HC("Aborting scan due to RF Kill activation\n");
+ priv->status |= STATUS_SCAN_PENDING;
+ return 0;
+ }
+
+ memset(&scan, 0, sizeof(scan));
+
+ scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] = 20;
+ scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN] = 20;
+ scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = 20;
+
+ scan.full_scan_index = ieee80211_get_scans(priv->ieee);
+ /* If we are roaming, then make this a directed scan for the current
+ * network. Otherwise, ensure that every other scan is a fast
+ * channel hop scan */
+ if ((priv->status & STATUS_ROAMING) || (
+ !(priv->status & STATUS_ASSOCIATED) &&
+ (priv->config & CFG_STATIC_ESSID) &&
+ (scan.full_scan_index % 2))) {
+ err = ipw_send_ssid(priv, priv->essid, priv->essid_len);
+ if (err) {
+ IPW_DEBUG_HC("Attempt to send SSID command failed.\n");
+ return err;
+ }
+
+ scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN;
+ } else {
+ scan_type = IPW_SCAN_ACTIVE_BROADCAST_SCAN;
+ }
+
+ if (priv->ieee->freq_band & IEEE80211_52GHZ_BAND) {
+ int start = channel_index;
+ for (i = 0; i < MAX_A_CHANNELS; i++) {
+ if (band_a_active_channel[i] == 0)
+ break;
+ if ((priv->status & STATUS_ASSOCIATED) &&
+ band_a_active_channel[i] == priv->channel)
+ continue;
+ channel_index++;
+ scan.channels_list[channel_index] =
+ band_a_active_channel[i];
+ ipw_set_scan_type(&scan, channel_index, scan_type);
+ }
+
+ if (start != channel_index) {
+ scan.channels_list[start] = (u8)(IPW_A_MODE << 6) |
+ (channel_index - start);
+ channel_index++;
+ }
+ }
+
+ if (priv->ieee->freq_band & IEEE80211_24GHZ_BAND) {
+ int start = channel_index;
+ for (i = 0; i < MAX_B_CHANNELS; i++) {
+ if (band_b_active_channel[i] == 0)
+ break;
+ if ((priv->status & STATUS_ASSOCIATED) &&
+ band_b_active_channel[i] == priv->channel)
+ continue;
+ channel_index++;
+ scan.channels_list[channel_index] =
+ band_b_active_channel[i];
+ ipw_set_scan_type(&scan, channel_index, scan_type);
+ }
+
+ if (start != channel_index) {
+ scan.channels_list[start] = (u8)(IPW_B_MODE << 6) |
+ (channel_index - start);
+ }
+ }
+
+ err = ipw_send_scan_request_ext(priv, &scan);
+ if (err) {
+ IPW_DEBUG_HC("Sending scan command failed: %08X\n",
+ err);
+ return -EIO;
+ }
+
+ priv->status |= STATUS_SCANNING;
+ priv->status &= ~STATUS_SCAN_PENDING;
+
+ return 0;
+}
+
+/*
+ * This file defines the Wireless Extension handlers. It does not
+ * define any methods of hardware manipulation and relies on the
+ * functions defined in ipw_main to provide the HW interaction.
+ *
+ * The exception to this is the use of the ipw_get_ordinal()
+ * function used to poll the hardware vs. making unecessary calls.
+ *
+ */
+
+static int ipw_wx_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ if (!(priv->status & STATUS_ASSOCIATED))
+ strcpy(wrqu->name, "unassociated");
+ else
+ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c",
+ ipw_modes[priv->assoc_request.ieee_mode]);
+ IPW_DEBUG_WX("Name: %s\n", wrqu->name);
+ return 0;
+}
+
+static int ipw_set_channel(struct ipw_priv *priv, u8 channel)
+{
+ if (channel == 0) {
+ IPW_DEBUG_INFO("Setting channel to ANY (0)\n");
+ priv->config &= ~CFG_STATIC_CHANNEL;
+ if (!(priv->status & (STATUS_SCANNING | STATUS_ASSOCIATED |
+ STATUS_ASSOCIATING))) {
+ IPW_DEBUG_ASSOC("Attempting to associate with new "
+ "parameters.\n");
+ ipw_associate(priv);
+ }
+
+ return 0;
+ }
+
+ priv->config |= CFG_STATIC_CHANNEL;
+
+ if (priv->channel == channel) {
+ IPW_DEBUG_INFO(
+ "Request to set channel to current value (%d)\n",
+ channel);
+ return 0;
+ }
+
+ IPW_DEBUG_INFO("Setting channel to %i\n", (int)channel);
+ priv->channel = channel;
+
+ /* If we are currently associated, or trying to associate
+ * then see if this is a new channel (causing us to disassociate) */
+ if (priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) {
+ IPW_DEBUG_ASSOC("Disassociating due to channel change.\n");
+ ipw_disassociate(priv);
+ } else {
+ ipw_associate(priv);
+ }
+
+ return 0;
+}
+
+static int ipw_wx_set_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ struct iw_freq *fwrq = &wrqu->freq;
+
+ /* if setting by freq convert to channel */
+ if (fwrq->e == 1) {
+ if ((fwrq->m >= (int) 2.412e8 &&
+ fwrq->m <= (int) 2.487e8)) {
+ int f = fwrq->m / 100000;
+ int c = 0;
+
+ while ((c < REG_MAX_CHANNEL) &&
+ (f != ipw_frequencies[c]))
+ c++;
+
+ /* hack to fall through */
+ fwrq->e = 0;
+ fwrq->m = c + 1;
+ }
+ }
+
+ if (fwrq->e > 0 || fwrq->m > 1000)
+ return -EOPNOTSUPP;
+
+ IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
+ return ipw_set_channel(priv, (u8)fwrq->m);
+
+ return 0;
+}
+
+
+static int ipw_wx_get_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ wrqu->freq.e = 0;
+
+ /* If we are associated, trying to associate, or have a statically
+ * configured CHANNEL then return that; otherwise return ANY */
+ if (priv->config & CFG_STATIC_CHANNEL ||
+ priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED))
+ wrqu->freq.m = priv->channel;
+ else
+ wrqu->freq.m = 0;
+
+ IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
+ return 0;
+}
+
+static int ipw_wx_set_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ int err = 0;
+
+ IPW_DEBUG_WX("Set MODE: %d\n", wrqu->mode);
+
+ if (wrqu->mode == priv->ieee->iw_mode)
+ return 0;
+
+ switch (wrqu->mode) {
+#ifdef CONFIG_IPW_PROMISC
+ case IW_MODE_MONITOR:
+#endif
+ case IW_MODE_ADHOC:
+ case IW_MODE_INFRA:
+ break;
+ case IW_MODE_AUTO:
+ wrqu->mode = IW_MODE_INFRA;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+#ifdef CONFIG_IPW_PROMISC
+ if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+ priv->net_dev->type = ARPHRD_ETHER;
+
+ if (wrqu->mode == IW_MODE_MONITOR)
+ priv->net_dev->type = ARPHRD_IEEE80211;
+#endif /* CONFIG_IPW_PROMISC */
+
+#ifdef CONFIG_PM
+ /* Free the existing firmware and reset the fw_loaded
+ * flag so ipw_load() will bring in the new firmawre */
+ if (fw_loaded) {
+ fw_loaded = 0;
+ }
+
+ release_firmware(bootfw);
+ release_firmware(ucode);
+ release_firmware(firmware);
+ bootfw = ucode = firmware = NULL;
+#endif
+
+ priv->ieee->iw_mode = wrqu->mode;
+ ipw_adapter_restart(priv);
+
+ return err;
+}
+
+static int ipw_wx_get_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ wrqu->mode = priv->ieee->iw_mode;
+ IPW_DEBUG_WX("Get MODE -> %d\n", wrqu->mode);
+
+ return 0;
+}
+
+
+#define DEFAULT_RTS_THRESHOLD 2304U
+#define MIN_RTS_THRESHOLD 1U
+#define MAX_RTS_THRESHOLD 2304U
+#define DEFAULT_BEACON_INTERVAL 100U
+#define DEFAULT_SHORT_RETRY_LIMIT 7U
+#define DEFAULT_LONG_RETRY_LIMIT 4U
+
+/* Values are in microsecond */
+static const s32 timeout_duration[] = {
+ 350000,
+ 250000,
+ 75000,
+ 37000,
+ 25000,
+};
+
+static const s32 period_duration[] = {
+ 400000,
+ 700000,
+ 1000000,
+ 1000000,
+ 1000000
+};
+
+static int ipw_wx_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ struct iw_range *range = (struct iw_range *)extra;
+ u16 val;
+ int i;
+
+ wrqu->data.length = sizeof(*range);
+ memset(range, 0, sizeof(*range));
+
+ /* 54Mbs == ~27 Mb/s real (802.11g) */
+ range->throughput = 27 * 1000 * 1000;
+
+ range->max_qual.qual = 100;
+ /* TODO: Find real max RSSI and stick here */
+ range->max_qual.level = 0;
+ range->max_qual.noise = 0;
+ range->max_qual.updated = 7; /* Updated all three */
+
+ range->avg_qual.qual = 70;
+ /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ range->avg_qual.level = 0; /* FIXME to real average level */
+ range->avg_qual.noise = 0;
+ range->avg_qual.updated = 7; /* Updated all three */
+
+ range->num_bitrates = min(priv->rates.num_rates, (u8)IW_MAX_BITRATES);
+
+ for (i = 0; i < range->num_bitrates; i++)
+ range->bitrate[i] = (priv->rates.supported_rates[i] & 0x7F) *
+ 500000;
+
+ range->max_rts = DEFAULT_RTS_THRESHOLD;
+ range->min_frag = MIN_FRAG_THRESHOLD;
+ range->max_frag = MAX_FRAG_THRESHOLD;
+
+ range->encoding_size[0] = 5;
+ range->encoding_size[1] = 13;
+ range->num_encoding_sizes = 2;
+ range->max_encoding_tokens = WEP_KEYS;
+
+ /* Set the Wireless Extension versions */
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 16;
+
+ range->num_channels = FREQ_COUNT;
+
+ val = 0;
+ for (i = 0; i < FREQ_COUNT; i++) {
+ range->freq[val].i = i + 1;
+ range->freq[val].m = ipw_frequencies[i] * 100000;
+ range->freq[val].e = 1;
+ val++;
+
+ if (val == IW_MAX_FREQUENCIES)
+ break;
+ }
+ range->num_frequency = val;
+
+ IPW_DEBUG_WX("GET Range\n");
+ return 0;
+}
+
+static int ipw_wx_set_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ static const unsigned char any[] = {
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+ };
+ static const unsigned char off[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+
+ if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+
+ if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
+ !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
+ /* we disable mandatory BSSID association */
+ IPW_DEBUG_WX("Setting AP BSSID to ANY\n");
+ priv->config &= ~CFG_STATIC_BSSID;
+ if (!(priv->status & (STATUS_SCANNING | STATUS_ASSOCIATED |
+ STATUS_ASSOCIATING))) {
+ IPW_DEBUG_ASSOC("Attempting to associate with new "
+ "parameters.\n");
+ ipw_associate(priv);
+ }
+
+ return 0;
+ }
+
+ priv->config |= CFG_STATIC_BSSID;
+ if (!memcmp(priv->bssid, wrqu->ap_addr.sa_data, ETH_ALEN)) {
+ IPW_DEBUG_WX("BSSID set to current BSSID.\n");
+ return 0;
+ }
+
+ IPW_DEBUG_WX("Setting mandatory BSSID to " MAC_FMT "\n",
+ MAC_ARG(wrqu->ap_addr.sa_data));
+
+ memcpy(priv->bssid, wrqu->ap_addr.sa_data, ETH_ALEN);
+
+ /* If we are currently associated, or trying to associate
+ * then see if this is a new BSSID (causing us to disassociate) */
+ if (priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) {
+ IPW_DEBUG_ASSOC("Disassociating due to BSSID change.\n");
+ ipw_disassociate(priv);
+ } else {
+ ipw_associate(priv);
+ }
+
+ return 0;
+}
+
+static int ipw_wx_get_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ /* If we are associated, trying to associate, or have a statically
+ * configured BSSID then return that; otherwise return ANY */
+ if (priv->config & CFG_STATIC_BSSID ||
+ priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) {
+ wrqu->ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(wrqu->ap_addr.sa_data, &priv->bssid, ETH_ALEN);
+ } else
+ memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
+
+ IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n",
+ MAC_ARG(wrqu->ap_addr.sa_data));
+ return 0;
+}
+
+static int ipw_wx_set_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ char *essid = ""; /* ANY */
+ int length = 0;
+
+ if (wrqu->essid.flags && wrqu->essid.length) {
+ length = wrqu->essid.length - 1;
+ essid = extra;
+ }
+ if (length == 0) {
+ IPW_DEBUG_WX("Setting ESSID to ANY\n");
+ priv->config &= ~CFG_STATIC_ESSID;
+ if (!(priv->status & (STATUS_SCANNING | STATUS_ASSOCIATED |
+ STATUS_ASSOCIATING))) {
+ IPW_DEBUG_ASSOC("Attempting to associate with new "
+ "parameters.\n");
+ ipw_associate(priv);
+ }
+
+ return 0;
+ }
+
+ length = min(length, IW_ESSID_MAX_SIZE);
+
+ priv->config |= CFG_STATIC_ESSID;
+
+ if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
+ IPW_DEBUG_WX("ESSID set to current ESSID.\n");
+ return 0;
+ }
+
+ IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length),
+ length);
+
+ priv->essid_len = length;
+ memcpy(priv->essid, essid, priv->essid_len);
+
+ /* If we are currently associated, or trying to associate
+ * then see if this is a new ESSID (causing us to disassociate) */
+ if (priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) {
+ IPW_DEBUG_ASSOC("Disassociating due to ESSID change.\n");
+ ipw_disassociate(priv);
+ } else {
+ ipw_associate(priv);
+ }
+
+ return 0;
+}
+
+static int ipw_wx_get_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ /* If we are associated, trying to associate, or have a statically
+ * configured ESSID then return that; otherwise return ANY */
+ if (priv->config & CFG_STATIC_ESSID ||
+ priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) {
+ IPW_DEBUG_WX("Getting essid: '%s'\n",
+ escape_essid(priv->essid, priv->essid_len));
+ memcpy(extra, priv->essid, priv->essid_len);
+ wrqu->essid.length = priv->essid_len;
+ wrqu->essid.flags = 1; /* active */
+ } else {
+ IPW_DEBUG_WX("Getting essid: ANY\n");
+ wrqu->essid.length = 0;
+ wrqu->essid.flags = 0; /* active */
+ }
+
+ return 0;
+}
+
+static int ipw_wx_set_nick(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ IPW_DEBUG_WX("Setting nick to '%s'\n", extra);
+ if (wrqu->data.length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ wrqu->data.length = min((size_t)wrqu->data.length, sizeof(priv->nick));
+ memset(priv->nick, 0, sizeof(priv->nick));
+ memcpy(priv->nick, extra, wrqu->data.length);
+ IPW_DEBUG_TRACE("<<\n");
+ return 0;
+
+}
+
+
+static int ipw_wx_get_nick(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ IPW_DEBUG_WX("Getting nick\n");
+ wrqu->data.length = strlen(priv->nick) + 1;
+ memcpy(extra, priv->nick, wrqu->data.length);
+ wrqu->data.flags = 1; /* active */
+ return 0;
+}
+
+
+static int ipw_wx_set_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ IPW_DEBUG_WX("0x%p, 0x%p, 0x%p\n", dev, info, wrqu);
+ return -EOPNOTSUPP;
+}
+
+static int ipw_wx_get_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv * priv = ieee80211_priv(dev);
+ wrqu->bitrate.value = priv->last_rate;
+
+ IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
+ return 0;
+}
+
+
+static int ipw_wx_set_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ if (wrqu->rts.disabled)
+ priv->rts_threshold = DEFAULT_RTS_THRESHOLD;
+ else {
+ if (wrqu->rts.value < MIN_RTS_THRESHOLD ||
+ wrqu->rts.value > MAX_RTS_THRESHOLD)
+ return -EINVAL;
+
+ priv->rts_threshold = wrqu->rts.value;
+ }
+
+ ipw_send_rts_threshold(priv, priv->rts_threshold);
+ IPW_DEBUG_WX("SET RTS Threshold -> %d \n", priv->rts_threshold);
+ return 0;
+}
+
+static int ipw_wx_get_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ wrqu->rts.value = priv->rts_threshold;
+ wrqu->rts.fixed = 0; /* no auto select */
+ wrqu->rts.disabled =
+ (wrqu->rts.value == DEFAULT_RTS_THRESHOLD);
+
+ IPW_DEBUG_WX("GET RTS Threshold -> %d \n", wrqu->rts.value);
+ return 0;
+}
+
+
+static int ipw_wx_set_txpow(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ struct ipw_tx_power tx_power;
+ int i;
+
+ if (ipw_radio_kill_sw(priv, wrqu->power.disabled))
+ return -EINPROGRESS;
+
+ if (wrqu->power.flags != IW_TXPOW_DBM)
+ return -EINVAL;
+
+ if ((wrqu->power.value > 20) ||
+ (wrqu->power.value < -12))
+ return -EINVAL;
+
+ priv->tx_power = wrqu->power.value;
+
+ memset(&tx_power, 0, sizeof(tx_power));
+
+ /* configure device for 'G' band */
+ tx_power.ieee_mode = IPW_G_MODE;
+ tx_power.num_channels = 11;
+ for (i = 0; i < 11; i++) {
+ tx_power.channels_tx_power[i].channel_number = i + 1;
+ tx_power.channels_tx_power[i].tx_power = priv->tx_power;
+ }
+ if (ipw_send_tx_power(priv, &tx_power))
+ goto error;
+
+ /* configure device to also handle 'B' band */
+ tx_power.ieee_mode = IPW_B_MODE;
+ if (ipw_send_tx_power(priv, &tx_power))
+ goto error;
+
+ return 0;
+
+ error:
+ return -EIO;
+}
+
+
+static int ipw_wx_get_txpow(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ wrqu->power.value = priv->tx_power;
+ wrqu->power.fixed = 1;
+ wrqu->power.flags = IW_TXPOW_DBM;
+ wrqu->power.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
+
+ IPW_DEBUG_WX("GET TX Power -> %s %d \n",
+ wrqu->power.disabled ? "ON" : "OFF",
+ wrqu->power.value);
+
+ return 0;
+}
+
+static int ipw_wx_set_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ if (wrqu->frag.disabled)
+ priv->ieee->fts = DEFAULT_FTS;
+ else {
+ if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
+ wrqu->frag.value > MAX_FRAG_THRESHOLD)
+ return -EINVAL;
+
+ priv->ieee->fts = wrqu->frag.value & ~0x1;
+ }
+
+ ipw_send_frag_threshold(priv, wrqu->frag.value);
+ IPW_DEBUG_WX("SET Frag Threshold -> %d \n", wrqu->frag.value);
+ return 0;
+}
+
+static int ipw_wx_get_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ wrqu->frag.value = priv->ieee->fts;
+ wrqu->frag.fixed = 0; /* no auto select */
+ wrqu->frag.disabled =
+ (wrqu->frag.value == DEFAULT_FTS);
+
+ IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
+
+ return 0;
+}
+
+static int ipw_wx_set_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ IPW_DEBUG_WX("0x%p, 0x%p, 0x%p\n", dev, info, wrqu);
+ return -EOPNOTSUPP;
+}
+
+
+static int ipw_wx_get_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ IPW_DEBUG_WX("0x%p, 0x%p, 0x%p\n", dev, info, wrqu);
+ return -EOPNOTSUPP;
+}
+
+
+static int ipw_wx_set_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ IPW_DEBUG_WX("Start scan\n");
+ if (ipw_request_scan(priv))
+ return -EIO;
+ return 0;
+}
+
+static int ipw_wx_get_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
+}
+
+static int ipw_wx_set_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
+}
+
+static int ipw_wx_get_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
+}
+
+static int ipw_wx_set_power(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ int err;
+
+ if (wrqu->power.disabled) {
+ priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
+ err = ipw_send_power_mode(priv, IPW_POWER_MODE_CAM);
+ if (err) {
+ IPW_DEBUG_WX("failed setting power mode.\n");
+ return err;
+ }
+
+ IPW_DEBUG_WX("SET Power Management Mode -> off\n");
+
+ return 0;
+ }
+
+ switch (wrqu->power.flags & IW_POWER_MODE) {
+ case IW_POWER_ON: /* If not specified */
+ case IW_POWER_MODE: /* If set all mask */
+ case IW_POWER_ALL_R: /* If explicitely state all */
+ break;
+ default: /* Otherwise we don't support it */
+ IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
+ wrqu->power.flags);
+ return -EOPNOTSUPP;
+ }
+
+ /* If the user hasn't specified a power management mode yet, default
+ * to BATTERY */
+ if (IPW_POWER_LEVEL(priv->power_mode) == IPW_POWER_AC)
+ priv->power_mode = IPW_POWER_ENABLED | IPW_POWER_BATTERY;
+ else
+ priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
+ err = ipw_send_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
+ if (err) {
+ IPW_DEBUG_WX("failed setting power mode.\n");
+ return err;
+ }
+
+ IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n",
+ priv->power_mode);
+
+ return 0;
+}
+
+static int ipw_wx_get_power(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ if (!(priv->power_mode & IPW_POWER_ENABLED)) {
+ wrqu->power.disabled = 1;
+ } else {
+ wrqu->power.disabled = 0;
+ }
+
+ IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
+
+ return 0;
+}
+
+static int ipw_wx_set_powermode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ int mode = *(int *)extra;
+ int err;
+
+ if ((mode < 1) || (mode > IPW_POWER_LIMIT)) {
+ mode = IPW_POWER_AC;
+ priv->power_mode = mode;
+ } else {
+ priv->power_mode = IPW_POWER_ENABLED | mode;
+ }
+
+ if (priv->power_mode != mode) {
+ err = ipw_send_power_mode(priv, mode);
+
+ if (err) {
+ IPW_DEBUG_WX("failed setting power mode.\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+#define MAX_WX_STRING 80
+static int ipw_wx_get_powermode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ int level = IPW_POWER_LEVEL(priv->power_mode);
+ char *p = extra;
+
+ p += snprintf(p, MAX_WX_STRING, "Power save level: %d ", level);
+
+ switch (level) {
+ case IPW_POWER_AC:
+ p += snprintf(p, MAX_WX_STRING - (p - extra), "(AC)");
+ break;
+ case IPW_POWER_BATTERY:
+ p += snprintf(p, MAX_WX_STRING - (p - extra), "(BATTERY)");
+ break;
+ default:
+ p += snprintf(p, MAX_WX_STRING - (p - extra),
+ "(Timeout %dms, Period %dms)",
+ timeout_duration[level - 1] / 1000,
+ period_duration[level - 1] / 1000);
+ }
+
+ if (!(priv->power_mode & IPW_POWER_ENABLED))
+ p += snprintf(p, MAX_WX_STRING - (p - extra)," OFF");
+
+ wrqu->data.length = p - extra + 1;
+
+ return 0;
+}
+
+static int ipw_wx_set_wireless_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ int mode = *(int *)extra;
+ u8 band = 0, modulation = 0;
+
+ if (mode == 0 || mode & ~IEEE_MODE_MASK) {
+ IPW_WARNING("Attempt to set invalid wireless mode: %d\n",
+ mode);
+ return -EINVAL;
+ }
+
+ if (priv->adapter == IPW_2915ABG) {
+ priv->ieee->abg_ture = 1;
+ if (mode & IEEE_A) {
+ band |= IEEE80211_52GHZ_BAND;
+ modulation |= IEEE80211_OFDM_MODULATION;
+ } else
+ priv->ieee->abg_ture = 0;
+ } else {
+ if (mode & IEEE_A) {
+ IPW_WARNING("Attempt to set 2200BG into "
+ "802.11a mode\n");
+ return -EINVAL;
+ }
+
+ priv->ieee->abg_ture = 0;
+ }
+
+ if (mode & IEEE_B) {
+ band |= IEEE80211_24GHZ_BAND;
+ modulation |= IEEE80211_CCK_MODULATION;
+ } else
+ priv->ieee->abg_ture = 0;
+
+ if (mode & IEEE_G) {
+ band |= IEEE80211_24GHZ_BAND;
+ modulation |= IEEE80211_OFDM_MODULATION;
+ } else
+ priv->ieee->abg_ture = 0;
+
+ priv->ieee->mode = mode;
+ priv->ieee->freq_band = band;
+ priv->ieee->modulation = modulation;
+ init_supported_rates(priv, &priv->rates);
+
+ /* If we are currently associated, or trying to associate
+ * then see if this is a new configuration (causing us to
+ * disassociate) */
+ if (priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) {
+ /* The resulting association will trigger
+ * the new rates to be sent to the device */
+ IPW_DEBUG_ASSOC("Disassociating due to mode change.\n");
+ ipw_disassociate(priv);
+ } else
+ ipw_send_supported_rates(priv, &priv->rates);
+
+ IPW_DEBUG_WX("PRIV SET MODE: %c%c%c\n",
+ mode & IEEE_A ? 'a' : '.',
+ mode & IEEE_B ? 'b' : '.',
+ mode & IEEE_G ? 'g' : '.');
+ return 0;
+}
+
+static int ipw_wx_get_wireless_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ switch (priv->ieee->freq_band) {
+ case IEEE80211_24GHZ_BAND:
+ switch (priv->ieee->modulation) {
+ case IEEE80211_CCK_MODULATION:
+ strncpy(extra, "802.11b (2)", MAX_WX_STRING);
+ break;
+ case IEEE80211_OFDM_MODULATION:
+ strncpy(extra, "802.11g (4)", MAX_WX_STRING);
+ break;
+ default:
+ strncpy(extra, "802.11bg (6)", MAX_WX_STRING);
+ break;
+ }
+ break;
+
+ case IEEE80211_52GHZ_BAND:
+ strncpy(extra, "802.11a (1)", MAX_WX_STRING);
+ break;
+
+ default: /* Mixed Band */
+ switch (priv->ieee->modulation) {
+ case IEEE80211_CCK_MODULATION:
+ strncpy(extra, "802.11ab (3)", MAX_WX_STRING);
+ break;
+ case IEEE80211_OFDM_MODULATION:
+ strncpy(extra, "802.11ag (5)", MAX_WX_STRING);
+ break;
+ default:
+ strncpy(extra, "802.11abg (7)", MAX_WX_STRING);
+ break;
+ }
+ break;
+ }
+
+ IPW_DEBUG_WX("PRIV GET MODE: %s\n", extra);
+
+ wrqu->data.length = strlen(extra) + 1;
+
+ return 0;
+}
+
+#ifdef CONFIG_IPW_PROMISC
+static int ipw_wx_set_promisc(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ int *parms = (int *)extra;
+ int enable = (parms[0] > 0);
+
+ IPW_DEBUG_WX("SET PROMISC: %d %d\n", enable, parms[1]);
+ if (enable) {
+ if (priv->ieee->iw_mode != IW_MODE_MONITOR) {
+ priv->net_dev->type = ARPHRD_IEEE80211;
+ ipw_adapter_restart(priv);
+ }
+
+ ipw_set_channel(priv, parms[1]);
+ } else {
+ if (priv->ieee->iw_mode != IW_MODE_MONITOR)
+ return 0;
+ priv->net_dev->type = ARPHRD_ETHER;
+ ipw_adapter_restart(priv);
+ }
+ return 0;
+}
+
+
+static int ipw_wx_reset(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ IPW_DEBUG_WX("RESET\n");
+ ipw_adapter_restart(priv);
+ return 0;
+}
+#endif // CONFIG_IPW_PROMISC
+
+/* Rebase the WE IOCTLs to zero for the handler array */
+#define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT]
+static iw_handler ipw_wx_handlers[] =
+{
+ IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name,
+ IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq,
+ IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq,
+ IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode,
+ IW_IOCTL(SIOCGIWMODE) = ipw_wx_get_mode,
+ IW_IOCTL(SIOCGIWRANGE) = ipw_wx_get_range,
+ IW_IOCTL(SIOCSIWAP) = ipw_wx_set_wap,
+ IW_IOCTL(SIOCGIWAP) = ipw_wx_get_wap,
+ IW_IOCTL(SIOCSIWSCAN) = ipw_wx_set_scan,
+ IW_IOCTL(SIOCGIWSCAN) = ipw_wx_get_scan,
+ IW_IOCTL(SIOCSIWESSID) = ipw_wx_set_essid,
+ IW_IOCTL(SIOCGIWESSID) = ipw_wx_get_essid,
+ IW_IOCTL(SIOCSIWNICKN) = ipw_wx_set_nick,
+ IW_IOCTL(SIOCGIWNICKN) = ipw_wx_get_nick,
+ IW_IOCTL(SIOCSIWRATE) = ipw_wx_set_rate,
+ IW_IOCTL(SIOCGIWRATE) = ipw_wx_get_rate,
+ IW_IOCTL(SIOCSIWRTS) = ipw_wx_set_rts,
+ IW_IOCTL(SIOCGIWRTS) = ipw_wx_get_rts,
+ IW_IOCTL(SIOCSIWFRAG) = ipw_wx_set_frag,
+ IW_IOCTL(SIOCGIWFRAG) = ipw_wx_get_frag,
+ IW_IOCTL(SIOCSIWTXPOW) = ipw_wx_set_txpow,
+ IW_IOCTL(SIOCGIWTXPOW) = ipw_wx_get_txpow,
+ IW_IOCTL(SIOCSIWRETRY) = ipw_wx_set_retry,
+ IW_IOCTL(SIOCGIWRETRY) = ipw_wx_get_retry,
+ IW_IOCTL(SIOCSIWENCODE) = ipw_wx_set_encode,
+ IW_IOCTL(SIOCGIWENCODE) = ipw_wx_get_encode,
+ IW_IOCTL(SIOCSIWPOWER) = ipw_wx_set_power,
+ IW_IOCTL(SIOCGIWPOWER) = ipw_wx_get_power,
+};
+
+#define IPW_PRIV_SET_POWER SIOCIWFIRSTPRIV
+#define IPW_PRIV_GET_POWER SIOCIWFIRSTPRIV+1
+#define IPW_PRIV_SET_MODE SIOCIWFIRSTPRIV+2
+#define IPW_PRIV_GET_MODE SIOCIWFIRSTPRIV+3
+#define IPW_PRIV_SET_PROMISC SIOCIWFIRSTPRIV+4
+#define IPW_PRIV_RESET SIOCIWFIRSTPRIV+5
+
+
+static struct iw_priv_args ipw_priv_args[] = {
+ {
+ .cmd = IPW_PRIV_SET_POWER,
+ .set_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ .name = "set_power"
+ },
+ {
+ .cmd = IPW_PRIV_GET_POWER,
+ .get_args = IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ .name = "get_power"
+ },
+ {
+ .cmd = IPW_PRIV_SET_MODE,
+ .set_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ .name = "set_mode"
+ },
+ {
+ .cmd = IPW_PRIV_GET_MODE,
+ .get_args = IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ .name = "get_mode"
+ },
+#ifdef CONFIG_IPW_PROMISC
+ {
+ IPW_PRIV_SET_PROMISC,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"
+ },
+ {
+ IPW_PRIV_RESET,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"
+ },
+#endif /* CONFIG_IPW_PROMISC */
+};
+
+static iw_handler ipw_priv_handler[] = {
+ ipw_wx_set_powermode,
+ ipw_wx_get_powermode,
+ ipw_wx_set_wireless_mode,
+ ipw_wx_get_wireless_mode,
+#ifdef CONFIG_IPW_PROMISC
+ ipw_wx_set_promisc,
+ ipw_wx_reset,
+#endif
+};
+
+static struct iw_handler_def ipw_wx_handler_def =
+{
+ .standard = ipw_wx_handlers,
+ .num_standard = ARRAY_SIZE(ipw_wx_handlers),
+ .num_private = ARRAY_SIZE(ipw_priv_handler),
+ .num_private_args = ARRAY_SIZE(ipw_priv_args),
+ .private = ipw_priv_handler,
+ .private_args = ipw_priv_args,
+};
+
+
+
+
+/*
+ * Get wireless statistics.
+ * Called by /proc/net/wireless
+ * Also called by SIOCGIWSTATS
+ */
+static struct iw_statistics *ipw_get_wireless_stats(struct net_device * dev)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ struct iw_statistics *wstats;
+
+ wstats = &priv->wstats;
+
+ /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
+ * ipw2100_wx_wireless_stats seems to be called before fw is
+ * initialized. STATUS_ASSOCIATED will only be set if the hw is up
+ * and associated; if not associcated, the values are all meaningless
+ * anyway, so set them all to NULL and INVALID */
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ wstats->miss.beacon = 0;
+ wstats->discard.retries = 0;
+ wstats->qual.qual = 0;
+ wstats->qual.level = 0;
+ wstats->qual.noise = 0;
+ wstats->qual.updated = 7;
+ wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
+ IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
+ return wstats;
+ }
+
+ wstats->qual.qual = priv->quality;
+ wstats->qual.level = average_value(&priv->average_rssi);
+ wstats->qual.noise = average_value(&priv->average_noise);
+ wstats->qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED |
+ IW_QUAL_NOISE_UPDATED;
+
+ wstats->miss.beacon = average_value(&priv->average_missed_beacons);
+ wstats->discard.retries = priv->last_tx_failures;
+ wstats->discard.code = priv->ieee->ieee_stats.rx_discards_undecryptable;
+
+/* if (ipw_get_ordinal(priv, IPW_ORD_STAT_TX_RETRY, &tx_retry, &len))
+ goto fail_get_ordinal;
+ wstats->discard.retries += tx_retry; */
+
+ return wstats;
+}
+
+
+/* net device stuff */
+
+static inline void init_sys_config(struct ipw_sys_config *sys_config)
+{
+ memset(sys_config, 0, sizeof(struct ipw_sys_config));
+ sys_config->bt_coexistence = 1; /* We may need to look into prvStaBtConfig */
+ sys_config->answer_broadcast_ssid_probe = 0;
+ sys_config->accept_all_data_frames = 0;
+ sys_config->accept_non_directed_frames = 1;
+ sys_config->exclude_unicast_unencrypted = 0;
+ sys_config->disable_unicast_decryption = 1;
+ sys_config->exclude_multicast_unencrypted = 0;
+ sys_config->disable_multicast_decryption = 1;
+ sys_config->antenna_diversity = CFG_SYS_ANTENNA_BOTH;
+ sys_config->pass_crc_to_host = 0; /* TODO: See if 1 gives us FCS */
+ sys_config->dot11g_auto_detection = 0;
+ sys_config->enable_cts_to_self = 0;
+ sys_config->bt_coexist_collision_thr = 0;
+ sys_config->pass_noise_stats_to_host = 1;
+}
+
+static int ipw_net_open(struct net_device *dev)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ IPW_DEBUG_INFO("dev->open\n");
+ /* we should be verifying the device is ready to be opened */
+ if (!(priv->status & STATUS_RF_KILL_MASK) &&
+ (priv->status & STATUS_ASSOCIATED))
+ netif_start_queue(dev);
+ return 0;
+}
+
+static int ipw_net_stop(struct net_device *dev)
+{
+ IPW_DEBUG_INFO("dev->close\n");
+ netif_stop_queue(dev);
+ return 0;
+}
+
+/*
+todo:
+
+modify to send one tfd per fragment instead of using chunking. otherwise
+we need to heavily modify the ieee80211_skb_to_txb.
+*/
+
+static inline void ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)
+ txb->fragments[0]->data;
+ int i = 0;
+ struct tfd_frame *tfd;
+ struct clx2_tx_queue *txq = &priv->txq[0];
+ struct clx2_queue *q = &txq->q;
+ u8 id, hdr_len, unicast;
+ u16 remaining_bytes;
+
+ switch (priv->ieee->iw_mode) {
+ case IW_MODE_ADHOC:
+ hdr_len = IEEE80211_3ADDR_LEN;
+ unicast = !is_broadcast_ether_addr(hdr->addr1) &&
+ !is_multicast_ether_addr(hdr->addr1);
+ id = ipw_find_station(priv, hdr->addr1);
+ if (id == IPW_INVALID_STATION) {
+ id = ipw_add_station(priv, hdr->addr1);
+ if (id == IPW_INVALID_STATION) {
+ IPW_WARNING("Attempt to send data to "
+ "invalid cell: " MAC_FMT "\n",
+ MAC_ARG(hdr->addr1));
+ goto drop;
+ }
+ }
+ break;
+
+ case IW_MODE_INFRA:
+ default:
+ unicast = !is_broadcast_ether_addr(hdr->addr3) &&
+ !is_multicast_ether_addr(hdr->addr3);
+ hdr_len = IEEE80211_3ADDR_LEN;
+ id = 0;
+ break;
+ }
+
+ tfd = &txq->bd[q->first_empty];
+ txq->txb[q->first_empty] = txb;
+ memset(tfd, 0, sizeof(*tfd));
+ tfd->u.data.station_number = id;
+
+ tfd->control_flags.message_type = TX_FRAME_TYPE;
+ tfd->control_flags.control_bits = TFD_NEED_IRQ_MASK;
+
+ tfd->u.data.cmd_id = DINO_CMD_TX;
+ tfd->u.data.len = txb->payload_size;
+ remaining_bytes = txb->payload_size;
+ if (unlikely(!unicast))
+ tfd->u.data.tx_flags = DCT_FLAG_NO_WEP;
+ else
+ tfd->u.data.tx_flags = DCT_FLAG_NO_WEP | DCT_FLAG_ACK_REQD;
+
+ if (priv->assoc_request.ieee_mode == IPW_B_MODE)
+ tfd->u.data.tx_flags_ext = DCT_FLAG_EXT_MODE_CCK;
+ else
+ tfd->u.data.tx_flags_ext = DCT_FLAG_EXT_MODE_OFDM;
+
+ if (priv->config & CFG_PREAMBLE)
+ tfd->u.data.tx_flags |= DCT_FLAG_SHORT_PREMBL;
+
+ memcpy(&tfd->u.data.tfd.tfd_24.mchdr, hdr, hdr_len);
+
+ /* payload */
+ tfd->u.data.num_chunks = min((u8)(NUM_TFD_CHUNKS - 2), txb->nr_frags);
+ for (i = 0; i < tfd->u.data.num_chunks; i++) {
+ IPW_DEBUG_TX("Dumping TX packet frag %i of %i (%d bytes):\n",
+ i, tfd->u.data.num_chunks,
+ txb->fragments[i]->len - hdr_len);
+ printk_buf(IPW_DL_TX, txb->fragments[i]->data + hdr_len,
+ txb->fragments[i]->len - hdr_len);
+
+ tfd->u.data.chunk_ptr[i] = pci_map_single(
+ priv->pci_dev, txb->fragments[i]->data + hdr_len,
+ txb->fragments[i]->len - hdr_len, PCI_DMA_TODEVICE);
+ tfd->u.data.chunk_len[i] = txb->fragments[i]->len - hdr_len;
+ }
+
+ if (i != txb->nr_frags) {
+ struct sk_buff *skb;
+ u16 remaining_bytes = 0;
+ int j;
+
+ for (j = i; j < txb->nr_frags; j++)
+ remaining_bytes += txb->fragments[j]->len - hdr_len;
+
+ printk(KERN_INFO "Trying to reallocate for %d bytes\n",
+ remaining_bytes);
+ skb = alloc_skb(remaining_bytes, GFP_ATOMIC);
+ if (skb != NULL) {
+ tfd->u.data.chunk_len[i] = remaining_bytes;
+ for (j = i; j < txb->nr_frags; j++) {
+ int size = txb->fragments[j]->len - hdr_len;
+ printk(KERN_INFO "Adding frag %d %d...\n",
+ j, size);
+ memcpy(skb_put(skb, size),
+ txb->fragments[j]->data + hdr_len,
+ size);
+ }
+ dev_kfree_skb_any(txb->fragments[i]);
+ txb->fragments[i] = skb;
+ tfd->u.data.chunk_ptr[i] = pci_map_single(
+ priv->pci_dev, skb->data,
+ tfd->u.data.chunk_len[i], PCI_DMA_TODEVICE);
+ tfd->u.data.num_chunks++;
+ }
+ }
+
+ /* kick DMA */
+ q->first_empty = ipw_queue_inc_wrap(q->first_empty, q->n_bd);
+ ipw_write32(priv, q->reg_w, q->first_empty);
+
+ if (ipw_queue_space(q) < q->high_mark)
+ netif_stop_queue(priv->net_dev);
+
+ return;
+
+ drop:
+ IPW_DEBUG_DROP("Silently dropping Tx packet.\n");
+ ieee80211_txb_free(txb);
+}
+
+static int ipw_net_hard_start_xmit(struct ieee80211_txb *txb,
+ struct net_device *dev)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ unsigned long flags;
+
+ IPW_DEBUG_TX("dev->xmit(%d bytes)\n", txb->payload_size);
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (!(priv->status & STATUS_ASSOCIATED)) {
+ IPW_DEBUG_INFO("Tx attempt while not associated.\n");
+ priv->ieee->stats.tx_carrier_errors++;
+ netif_stop_queue(dev);
+ goto fail_unlock;
+ }
+
+ ipw_tx_skb(priv, txb);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+
+ fail_unlock:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 1;
+}
+
+static struct net_device_stats *ipw_net_get_stats(struct net_device *dev)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ priv->ieee->stats.tx_packets = priv->tx_packets;
+ priv->ieee->stats.rx_packets = priv->rx_packets;
+ return &priv->ieee->stats;
+}
+
+static void ipw_net_set_multicast_list(struct net_device *dev)
+{
+
+}
+
+static int ipw_net_set_mac_address(struct net_device *dev, void *p)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ struct sockaddr *addr = p;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+ priv->config |= CFG_CUSTOM_MAC;
+ memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
+ printk(KERN_INFO "%s: Setting MAC to " MAC_FMT "\n",
+ priv->net_dev->name, MAC_ARG(priv->mac_addr));
+ ipw_adapter_restart(priv);
+ return 0;
+}
+
+static void ipw_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct ipw_priv *p = ieee80211_priv(dev);
+ char vers[64];
+ char date[32];
+ u32 len;
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+
+ len = sizeof(vers);
+ ipw_get_ordinal(p, IPW_ORD_STAT_FW_VERSION, vers, &len);
+ len = sizeof(date);
+ ipw_get_ordinal(p, IPW_ORD_STAT_FW_DATE, date, &len);
+
+ snprintf(info->fw_version, sizeof(info->fw_version),"%s (%s)",
+ vers, date);
+ strcpy(info->bus_info, pci_name(p->pci_dev));
+ info->eedump_len = CX2_EEPROM_IMAGE_SIZE;
+}
+
+static u32 ipw_ethtool_get_link(struct net_device *dev)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ return (priv->status & STATUS_ASSOCIATED) != 0;
+}
+
+static int ipw_ethtool_get_eeprom_len(struct net_device *dev)
+{
+ return CX2_EEPROM_IMAGE_SIZE;
+}
+
+static int ipw_ethtool_get_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct ipw_priv *p = ieee80211_priv(dev);
+
+ if (eeprom->offset + eeprom->len > CX2_EEPROM_IMAGE_SIZE)
+ return -EINVAL;
+
+ memcpy(bytes, &((u8 *)p->eeprom)[eeprom->offset], eeprom->len);
+ return 0;
+}
+
+static int ipw_ethtool_set_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct ipw_priv *p = ieee80211_priv(dev);
+ int i;
+
+ if (eeprom->offset + eeprom->len > CX2_EEPROM_IMAGE_SIZE)
+ return -EINVAL;
+
+ memcpy(&((u8 *)p->eeprom)[eeprom->offset], bytes, eeprom->len);
+ for (i = IPW_EEPROM_DATA;
+ i < IPW_EEPROM_DATA + CX2_EEPROM_IMAGE_SIZE;
+ i++)
+ ipw_write8(p, i, p->eeprom[i]);
+
+ return 0;
+}
+
+static struct ethtool_ops ipw_ethtool_ops = {
+ .get_link = ipw_ethtool_get_link,
+ .get_drvinfo = ipw_ethtool_get_drvinfo,
+ .get_eeprom_len = ipw_ethtool_get_eeprom_len,
+ .get_eeprom = ipw_ethtool_get_eeprom,
+ .set_eeprom = ipw_ethtool_set_eeprom,
+};
+
+static irqreturn_t ipw_isr(int irq, void *data, struct pt_regs *regs)
+{
+ struct ipw_priv *priv = data;
+ u32 inta, inta_mask;
+
+ if (!priv)
+ return IRQ_NONE;
+
+ spin_lock(&priv->lock);
+
+ if (!(priv->status & STATUS_INT_ENABLED)) {
+ /* Shared IRQ */
+ goto none;
+ }
+
+ inta = ipw_read32(priv, CX2_INTA_RW);
+ inta_mask = ipw_read32(priv, CX2_INTA_MASK_R);
+
+ if (inta == 0xFFFFFFFF) {
+ /* Hardware disappeared */
+ IPW_WARNING("IRQ INTA == 0xFFFFFFFF\n");
+ goto none;
+ }
+
+ if (!(inta & (CX2_INTA_MASK_ALL & inta_mask))) {
+ /* Shared interrupt */
+ goto none;
+ }
+
+ /* tell the device to stop sending interrupts */
+ ipw_disable_interrupts(priv);
+
+ /* ack current interrupts */
+ inta &= (CX2_INTA_MASK_ALL & inta_mask);
+ ipw_write32(priv, CX2_INTA_RW, inta);
+
+ /* Cache INTA value for our tasklet */
+ priv->isr_inta = inta;
+
+ tasklet_schedule(&priv->irq_tasklet);
+
+ spin_unlock(&priv->lock);
+
+ return IRQ_HANDLED;
+ none:
+ spin_unlock(&priv->lock);
+ return IRQ_NONE;
+}
+
+static void ipw_rf_kill(void *adapter)
+{
+ struct ipw_priv *priv = adapter;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (rf_kill_active(priv)) {
+ IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
+ if (priv->workqueue)
+ queue_delayed_work(priv->workqueue,
+ &priv->rf_kill, 2 * HZ);
+ goto exit_unlock;
+ }
+
+ /* RF Kill is now disabled, so bring the device back up */
+
+ if (!(priv->status & STATUS_RF_KILL_MASK)) {
+ IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
+ "device\n");
+
+ /* we can not do an adapter restart while inside an irq lock */
+ queue_work(priv->workqueue, &priv->adapter_restart);
+ } else
+ IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
+ "enabled\n");
+
+ exit_unlock:
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int ipw_setup_deferred_work(struct ipw_priv *priv)
+{
+ int ret = 0;
+
+#ifdef CONFIG_SOFTWARE_SUSPEND2
+ priv->workqueue = create_workqueue(DRV_NAME, 0);
+#else
+ priv->workqueue = create_workqueue(DRV_NAME);
+#endif
+ init_waitqueue_head(&priv->wait_command_queue);
+
+ INIT_WORK(&priv->adhoc_check, ipw_adhoc_check, priv);
+ INIT_WORK(&priv->associate, ipw_associate, priv);
+ INIT_WORK(&priv->disassociate, ipw_disassociate, priv);
+ INIT_WORK(&priv->rx_replenish, ipw_rx_queue_replenish, priv);
+ INIT_WORK(&priv->adapter_restart, ipw_adapter_restart, priv);
+ INIT_WORK(&priv->rf_kill, ipw_rf_kill, priv);
+ INIT_WORK(&priv->up, (void (*)(void *))ipw_up, priv);
+ INIT_WORK(&priv->down, (void (*)(void *))ipw_down, priv);
+ INIT_WORK(&priv->request_scan,
+ (void (*)(void *))ipw_request_scan, priv);
+ INIT_WORK(&priv->gather_stats,
+ (void (*)(void *))ipw_gather_stats, priv);
+ INIT_WORK(&priv->abort_scan, (void (*)(void *))ipw_abort_scan, priv);
+ INIT_WORK(&priv->roam, ipw_roam, priv);
+ INIT_WORK(&priv->scan_check, ipw_scan_check, priv);
+
+ tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+ ipw_irq_tasklet, (unsigned long)priv);
+
+ return ret;
+}
+
+
+static void shim__set_security(struct net_device *dev,
+ struct ieee80211_security *sec)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ if (sec->flags & (1 << i)) {
+ priv->sec.key_sizes[i] = sec->key_sizes[i];
+ if (sec->key_sizes[i] == 0)
+ priv->sec.flags &= ~(1 << i);
+ else
+ memcpy(priv->sec.keys[i], sec->keys[i],
+ sec->key_sizes[i]);
+ priv->sec.flags |= (1 << i);
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+ }
+
+ if ((sec->flags & SEC_ACTIVE_KEY) &&
+ priv->sec.active_key != sec->active_key) {
+ if (sec->active_key <= 3) {
+ priv->sec.active_key = sec->active_key;
+ priv->sec.flags |= SEC_ACTIVE_KEY;
+ } else
+ priv->sec.flags &= ~SEC_ACTIVE_KEY;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+
+ if ((sec->flags & SEC_AUTH_MODE) &&
+ (priv->sec.auth_mode != sec->auth_mode)) {
+ priv->sec.auth_mode = sec->auth_mode;
+ priv->sec.flags |= SEC_AUTH_MODE;
+ if (sec->auth_mode == WLAN_AUTH_SHARED_KEY)
+ priv->capability |= CAP_SHARED_KEY;
+ else
+ priv->capability &= ~CAP_SHARED_KEY;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+
+ if (sec->flags & SEC_ENABLED &&
+ priv->sec.enabled != sec->enabled) {
+ priv->sec.flags |= SEC_ENABLED;
+ priv->sec.enabled = sec->enabled;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ if (sec->enabled)
+ priv->capability |= CAP_PRIVACY_ON;
+ else
+ priv->capability &= ~CAP_PRIVACY_ON;
+ }
+
+ if (sec->flags & SEC_LEVEL &&
+ priv->sec.level != sec->level) {
+ priv->sec.level = sec->level;
+ priv->sec.flags |= SEC_LEVEL;
+ priv->status |= STATUS_SECURITY_UPDATED;
+ }
+
+ /* To match current functionality of ipw2100 (which works well w/
+ * various supplicants, we don't force a disassociate if the
+ * privacy capability changes ... */
+#if 0
+ if ((priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)) &&
+ (((priv->assoc_request.capability &
+ WLAN_CAPABILITY_PRIVACY) && !sec->enabled) ||
+ (!(priv->assoc_request.capability &
+ WLAN_CAPABILITY_PRIVACY) && sec->enabled))) {
+ IPW_DEBUG_ASSOC("Disassociating due to capability "
+ "change.\n");
+ ipw_disassociate(priv);
+ }
+#endif
+}
+
+static int init_supported_rates(struct ipw_priv *priv,
+ struct ipw_supported_rates *rates)
+{
+ /* TODO: Mask out rates based on priv->rates_mask */
+
+ memset(rates, 0, sizeof(*rates));
+ /* configure supported rates */
+ switch (priv->ieee->freq_band) {
+ case IEEE80211_52GHZ_BAND:
+ rates->ieee_mode = IPW_A_MODE;
+ rates->purpose = IPW_RATE_CAPABILITIES;
+ ipw_add_ofdm_scan_rates(rates, IEEE80211_CCK_MODULATION,
+ IEEE80211_OFDM_DEFAULT_RATES_MASK);
+ break;
+
+ default: /* Mixed or 2.4Ghz */
+ rates->ieee_mode = IPW_G_MODE;
+ rates->purpose = IPW_RATE_CAPABILITIES;
+ ipw_add_cck_scan_rates(rates, IEEE80211_CCK_MODULATION,
+ IEEE80211_CCK_DEFAULT_RATES_MASK);
+ if (priv->ieee->modulation & IEEE80211_OFDM_MODULATION) {
+ ipw_add_ofdm_scan_rates(rates, IEEE80211_CCK_MODULATION,
+ IEEE80211_OFDM_DEFAULT_RATES_MASK);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int ipw_config(struct ipw_priv *priv)
+{
+ int i;
+ struct ipw_tx_power tx_power;
+
+ memset(&priv->sys_config, 0, sizeof(priv->sys_config));
+ memset(&tx_power, 0, sizeof(tx_power));
+
+ /* This is only called from ipw_up, which resets/reloads the firmware
+ so, we don't need to first disable the card before we configure
+ it */
+
+ /* configure device for 'G' band */
+ tx_power.ieee_mode = IPW_G_MODE;
+ tx_power.num_channels = 11;
+ for (i = 0; i < 11; i++) {
+ tx_power.channels_tx_power[i].channel_number = i + 1;
+ tx_power.channels_tx_power[i].tx_power = priv->tx_power;
+ }
+ if (ipw_send_tx_power(priv, &tx_power))
+ goto error;
+
+ /* configure device to also handle 'B' band */
+ tx_power.ieee_mode = IPW_B_MODE;
+ if (ipw_send_tx_power(priv, &tx_power))
+ goto error;
+
+ /* initialize adapter address */
+ if (ipw_send_adapter_address(priv, priv->net_dev->dev_addr))
+ goto error;
+
+ /* set basic system config settings */
+ init_sys_config(&priv->sys_config);
+ if (ipw_send_system_config(priv, &priv->sys_config))
+ goto error;
+
+ init_supported_rates(priv, &priv->rates);
+ if (ipw_send_supported_rates(priv, &priv->rates))
+ goto error;
+
+ /* Set request-to-send threshold */
+ if (priv->rts_threshold) {
+ if (ipw_send_rts_threshold(priv, priv->rts_threshold))
+ goto error;
+ }
+
+ if (ipw_set_random_seed(priv))
+ goto error;
+
+ /* final state transition to the RUN state */
+ if (ipw_send_host_complete(priv))
+ goto error;
+
+ /* If configured to try and auto-associate, kick off a scan */
+ if ((priv->config & CFG_ASSOCIATE) && ipw_request_scan(priv))
+ goto error;
+
+ return 0;
+
+ error:
+ return -EIO;
+}
+
+#define MAX_HW_RESTARTS 5
+static int ipw_up(struct ipw_priv *priv)
+{
+ int rc, i;
+
+ if (priv->status & STATUS_EXIT_PENDING)
+ return -EIO;
+
+ for (i = 0; i < MAX_HW_RESTARTS; i++ ) {
+ /* Load the microcode, firmware, and eeprom.
+ * Also start the clocks. */
+ rc = ipw_load(priv);
+ if (rc) {
+ IPW_ERROR("Unable to load firmware: 0x%08X\n",
+ rc);
+ return rc;
+ }
+
+ ipw_init_ordinals(priv);
+ if (!(priv->config & CFG_CUSTOM_MAC))
+ eeprom_parse_mac(priv, priv->mac_addr);
+ memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
+
+ if (priv->status & STATUS_RF_KILL_MASK)
+ return 0;
+
+ rc = ipw_config(priv);
+ if (!rc) {
+ IPW_DEBUG_INFO("Configured device on count %i\n", i);
+ priv->notif_missed_beacons = 0;
+ netif_start_queue(priv->net_dev);
+ return 0;
+ } else {
+ IPW_DEBUG_INFO("Device configuration failed: 0x%08X\n",
+ rc);
+ }
+
+ IPW_DEBUG_INFO("Failed to config device on retry %d of %d\n",
+ i, MAX_HW_RESTARTS);
+
+ /* We had an error bringing up the hardware, so take it
+ * all the way back down so we can try again */
+ ipw_down(priv);
+ }
+
+ /* tried to restart and config the device for as long as our
+ * patience could withstand */
+ IPW_ERROR("Unable to initialize device after %d attempts.\n",
+ i);
+ return -EIO;
+}
+
+static void ipw_down(struct ipw_priv *priv)
+{
+ /* Attempt to disable the card */
+#if 0
+ ipw_send_card_disable(priv, 0);
+#endif
+
+ /* tell the device to stop sending interrupts */
+ ipw_disable_interrupts(priv);
+
+ /* Clear all bits but the RF Kill */
+ priv->status &= STATUS_RF_KILL_MASK;
+
+ netif_carrier_off(priv->net_dev);
+ netif_stop_queue(priv->net_dev);
+
+ ipw_stop_nic(priv);
+}
+
+/* Called by register_netdev() */
+static int ipw_net_init(struct net_device *dev)
+{
+ struct ipw_priv *priv = ieee80211_priv(dev);
+
+ if (priv->status & STATUS_RF_KILL_SW) {
+ IPW_WARNING("Radio disabled by module parameter.\n");
+ return 0;
+ } else if (rf_kill_active(priv)) {
+ IPW_WARNING("Radio Frequency Kill Switch is On:\n"
+ "Kill switch must be turned off for "
+ "wireless networking to work.\n");
+ queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ);
+ return 0;
+ }
+
+ if (ipw_up(priv))
+ return -EIO;
+
+ return 0;
+}
+
+/* PCI driver stuff */
+static struct pci_device_id card_ids[] = {
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2701, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2702, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2711, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2712, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2721, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2722, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2731, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2732, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2741, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x103c, 0x2741, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2742, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2751, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2752, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2753, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2754, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2761, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, 0x2762, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x104f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_INTEL, 0x4220, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* BG */
+ {PCI_VENDOR_ID_INTEL, 0x4221, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* 2225BG */
+ {PCI_VENDOR_ID_INTEL, 0x4223, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* ABG */
+ {PCI_VENDOR_ID_INTEL, 0x4224, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, /* ABG */
+
+ /* required last entry */
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, card_ids);
+
+static struct attribute *ipw_sysfs_entries[] = {
+ &dev_attr_rf_kill.attr,
+ &dev_attr_direct_dword.attr,
+ &dev_attr_indirect_byte.attr,
+ &dev_attr_indirect_dword.attr,
+ &dev_attr_mem_gpio_reg.attr,
+ &dev_attr_command_event_reg.attr,
+ &dev_attr_nic_type.attr,
+ &dev_attr_status.attr,
+ &dev_attr_cfg.attr,
+ &dev_attr_dump_errors.attr,
+ &dev_attr_dump_events.attr,
+ &dev_attr_eeprom_delay.attr,
+ &dev_attr_ucode_version.attr,
+ &dev_attr_rtc.attr,
+ NULL
+};
+
+static struct attribute_group ipw_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = ipw_sysfs_entries,
+};
+
+static int ipw_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err = 0;
+ struct net_device *net_dev;
+ void __iomem *base;
+ u32 length, val;
+ struct ipw_priv *priv;
+ int band, modulation;
+
+ net_dev = alloc_ieee80211(sizeof(struct ipw_priv));
+ if (net_dev == NULL) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ priv = ieee80211_priv(net_dev);
+ priv->ieee = netdev_priv(net_dev);
+ priv->net_dev = net_dev;
+ priv->pci_dev = pdev;
+#ifdef CONFIG_IPW_DEBUG
+ ipw_debug_level = debug;
+#endif
+ spin_lock_init(&priv->lock);
+
+ if (pci_enable_device(pdev)) {
+ err = -ENODEV;
+ goto out_free_ieee80211;
+ }
+
+ pci_set_master(pdev);
+
+#define PCI_DMA_32BIT 0x00000000ffffffffULL
+ err = pci_set_dma_mask(pdev, PCI_DMA_32BIT);
+ if (!err)
+ err = pci_set_consistent_dma_mask(pdev, PCI_DMA_32BIT);
+ if (err) {
+ printk(KERN_WARNING DRV_NAME ": No suitable DMA available.\n");
+ goto out_pci_disable_device;
+ }
+
+ pci_set_drvdata(pdev, priv);
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err)
+ goto out_pci_disable_device;
+
+ /* We disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+ length = pci_resource_len(pdev, 0);
+ priv->hw_len = length;
+
+ base = ioremap_nocache(pci_resource_start(pdev, 0), length);
+ if (!base) {
+ err = -ENODEV;
+ goto out_pci_release_regions;
+ }
+
+ priv->hw_base = base;
+ IPW_DEBUG_INFO("pci_resource_len = 0x%08x\n", length);
+ IPW_DEBUG_INFO("pci_resource_base = %p\n", base);
+
+ err = ipw_setup_deferred_work(priv);
+ if (err) {
+ IPW_ERROR("Unable to setup deferred work\n");
+ goto out_iounmap;
+ }
+
+ /* Initialize module parameter values here */
+ if (ifname)
+ strncpy(net_dev->name, ifname, IFNAMSIZ);
+
+ if (associate)
+ priv->config |= CFG_ASSOCIATE;
+ else
+ IPW_DEBUG_INFO("Auto associate disabled.\n");
+
+ if (auto_create)
+ priv->config |= CFG_ADHOC_CREATE;
+ else
+ IPW_DEBUG_INFO("Auto adhoc creation disabled.\n");
+
+ if (disable) {
+ priv->status |= STATUS_RF_KILL_SW;
+ IPW_DEBUG_INFO("Radio disabled.\n");
+ }
+
+ if (channel != 0) {
+ priv->config |= CFG_STATIC_CHANNEL;
+ priv->channel = channel;
+ IPW_DEBUG_INFO("Bind to static channel %d\n", channel);
+ IPW_DEBUG_INFO("Bind to static channel %d\n", channel);
+ /* TODO: Validate that provided channel is in range */
+ }
+
+ switch (mode) {
+ case 1:
+ priv->ieee->iw_mode = IW_MODE_ADHOC;
+ break;
+#ifdef CONFIG_IPW_PROMISC
+ case 2:
+ priv->ieee->iw_mode = IW_MODE_MONITOR;
+ break;
+#endif
+ default:
+ case 0:
+ priv->ieee->iw_mode = IW_MODE_INFRA;
+ break;
+ }
+
+ if ((priv->pci_dev->device == 0x4223) ||
+ (priv->pci_dev->device == 0x4224)) {
+ printk(KERN_INFO DRV_NAME
+ ": Detected Intel PRO/Wireless 2915ABG Network "
+ "Connection\n");
+ priv->ieee->abg_ture = 1;
+ band = IEEE80211_52GHZ_BAND | IEEE80211_24GHZ_BAND;
+ modulation = IEEE80211_OFDM_MODULATION |
+ IEEE80211_CCK_MODULATION;
+ priv->adapter = IPW_2915ABG;
+ priv->ieee->mode = IEEE_A|IEEE_G|IEEE_B;
+ } else {
+ if (priv->pci_dev->device == 0x4221)
+ printk(KERN_INFO DRV_NAME
+ ": Detected Intel PRO/Wireless 2225BG Network "
+ "Connection\n");
+ else
+ printk(KERN_INFO DRV_NAME
+ ": Detected Intel PRO/Wireless 2200BG Network "
+ "Connection\n");
+
+ priv->ieee->abg_ture = 0;
+ band = IEEE80211_24GHZ_BAND;
+ modulation = IEEE80211_OFDM_MODULATION |
+ IEEE80211_CCK_MODULATION;
+ priv->adapter = IPW_2200BG;
+ priv->ieee->mode = IEEE_G|IEEE_B;
+ }
+
+ priv->ieee->freq_band = band;
+ priv->ieee->modulation = modulation;
+
+ priv->rates_mask = IEEE80211_DEFAULT_RATES_MASK;
+
+ priv->missed_beacon_threshold = IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT;
+ priv->roaming_threshold = IPW_MB_ROAMING_THRESHOLD_DEFAULT;
+
+ priv->rts_threshold = DEFAULT_RTS_THRESHOLD;
+
+ /* If power management is turned on, default to AC mode */
+ priv->power_mode = IPW_POWER_AC;
+ priv->tx_power = IPW_DEFAULT_TX_POWER;
+
+ err = request_irq(pdev->irq, ipw_isr, SA_SHIRQ, DRV_NAME,
+ priv);
+ if (err) {
+ IPW_ERROR("Error allocating IRQ %d\n", pdev->irq);
+ goto out_destroy_workqueue;
+ }
+
+ SET_MODULE_OWNER(net_dev);
+ SET_NETDEV_DEV(net_dev, &pdev->dev);
+
+ priv->ieee->hard_start_xmit = ipw_net_hard_start_xmit;
+ priv->ieee->set_security = shim__set_security;
+
+ net_dev->open = ipw_net_open;
+ net_dev->stop = ipw_net_stop;
+ net_dev->init = ipw_net_init;
+ net_dev->get_stats = ipw_net_get_stats;
+ net_dev->set_multicast_list = ipw_net_set_multicast_list;
+ net_dev->set_mac_address = ipw_net_set_mac_address;
+ net_dev->get_wireless_stats = ipw_get_wireless_stats;
+ net_dev->wireless_handlers = &ipw_wx_handler_def;
+ net_dev->ethtool_ops = &ipw_ethtool_ops;
+ net_dev->irq = pdev->irq;
+ net_dev->base_addr = (unsigned long )priv->hw_base;
+ net_dev->mem_start = pci_resource_start(pdev, 0);
+ net_dev->mem_end = net_dev->mem_start + pci_resource_len(pdev, 0) - 1;
+
+ err = sysfs_create_group(&pdev->dev.kobj, &ipw_attribute_group);
+ if (err) {
+ IPW_ERROR("failed to create sysfs device attributes\n");
+ goto out_release_irq;
+ }
+
+ err = register_netdev(net_dev);
+ if (err) {
+ IPW_ERROR("failed to register network device\n");
+ goto out_remove_group;
+ }
+
+ return 0;
+
+ out_remove_group:
+ sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group);
+ out_release_irq:
+ free_irq(pdev->irq, priv);
+ out_destroy_workqueue:
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
+ out_iounmap:
+ iounmap(priv->hw_base);
+ out_pci_release_regions:
+ pci_release_regions(pdev);
+ out_pci_disable_device:
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ out_free_ieee80211:
+ free_ieee80211(priv->net_dev);
+ out:
+ return err;
+}
+
+static void ipw_pci_remove(struct pci_dev *pdev)
+{
+ struct ipw_priv *priv = pci_get_drvdata(pdev);
+ if (!priv)
+ return;
+
+ priv->status |= STATUS_EXIT_PENDING;
+
+ sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group);
+
+ ipw_down(priv);
+
+ unregister_netdev(priv->net_dev);
+
+ if (priv->rxq) {
+ ipw_rx_queue_free(priv, priv->rxq);
+ priv->rxq = NULL;
+ }
+ ipw_tx_queue_free(priv);
+
+ /* ipw_down will ensure that there is no more pending work
+ * in the workqueue's, so we can safely remove them now. */
+ if (priv->workqueue) {
+ cancel_delayed_work(&priv->adhoc_check);
+ cancel_delayed_work(&priv->gather_stats);
+ cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->rf_kill);
+ cancel_delayed_work(&priv->scan_check);
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
+ }
+
+ free_irq(pdev->irq, priv);
+ iounmap(priv->hw_base);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ free_ieee80211(priv->net_dev);
+
+#ifdef CONFIG_PM
+ if (fw_loaded) {
+ release_firmware(bootfw);
+ release_firmware(ucode);
+ release_firmware(firmware);
+ fw_loaded = 0;
+ }
+#endif
+}
+
+
+#ifdef CONFIG_PM
+static int ipw_pci_suspend(struct pci_dev *pdev, u32 state)
+{
+ struct ipw_priv *priv = pci_get_drvdata(pdev);
+ struct net_device *dev = priv->net_dev;
+
+ printk(KERN_INFO "%s: Going into suspend...\n", dev->name);
+
+ /* Take down the device; powers it off, etc. */
+ ipw_down(priv);
+
+ /* Remove the PRESENT state of the device */
+ netif_device_detach(dev);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+ pci_save_state(pdev, priv->pm_state);
+#else
+ pci_save_state(pdev);
+#endif
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, state);
+
+ return 0;
+}
+
+static int ipw_pci_resume(struct pci_dev *pdev)
+{
+ struct ipw_priv *priv = pci_get_drvdata(pdev);
+ struct net_device *dev = priv->net_dev;
+ u32 val;
+
+ printk(KERN_INFO "%s: Coming out of suspend...\n", dev->name);
+
+ pci_set_power_state(pdev, 0);
+ pci_enable_device(pdev);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+ pci_restore_state(pdev, priv->pm_state);
+#else
+ pci_restore_state(pdev);
+#endif
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
+ * from interfering with C3 CPU state. pci_restore_state won't help
+ * here since it only restores the first 64 bytes pci config header.
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+ /* Set the device back into the PRESENT state; this will also wake
+ * the queue of needed */
+ netif_device_attach(dev);
+
+ /* Bring the device back up */
+ queue_work(priv->workqueue, &priv->up);
+
+ return 0;
+}
+#endif
+
+/* driver initialization stuff */
+static struct pci_driver ipw_driver = {
+ .name = DRV_NAME,
+ .id_table = card_ids,
+ .probe = ipw_pci_probe,
+ .remove = __devexit_p(ipw_pci_remove),
+#ifdef CONFIG_PM
+ .suspend = ipw_pci_suspend,
+ .resume = ipw_pci_resume,
+#endif
+};
+
+static int __init ipw_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
+ printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
+
+ ret = pci_module_init(&ipw_driver);
+ if (ret) {
+ IPW_ERROR("Unable to initialize PCI module\n");
+ return ret;
+ }
+
+ ret = driver_create_file(&ipw_driver.driver,
+ &driver_attr_debug_level);
+ if (ret) {
+ IPW_ERROR("Unable to create driver sysfs file\n");
+ pci_unregister_driver(&ipw_driver);
+ return ret;
+ }
+
+ return ret;
+}
+
+static void __exit ipw_exit(void)
+{
+ driver_remove_file(&ipw_driver.driver, &driver_attr_debug_level);
+ pci_unregister_driver(&ipw_driver);
+}
+
+module_param(disable, int, 0444);
+MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
+
+module_param(associate, int, 0444);
+MODULE_PARM_DESC(associate, "auto associate when scanning (default on)");
+
+module_param(auto_create, int, 0444);
+MODULE_PARM_DESC(auto_create, "auto create adhoc network (default on)");
+
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "debug output mask");
+
+module_param(channel, int, 0444);
+MODULE_PARM_DESC(channel, "channel to limit associate to (default 0 [ANY])");
+
+module_param(ifname, charp, 0444);
+MODULE_PARM_DESC(ifname, "network device name (default eth%d)");
+
+#ifdef CONFIG_IPW_PROMISC
+module_param(mode, int, 0444);
+MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
+#else
+module_param(mode, int, 0444);
+MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS)");
+#endif
+
+module_exit(ipw_exit);
+module_init(ipw_init);
--- /dev/null
+/******************************************************************************
+
+ Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+
+#ifndef __ipw2200_h__
+#define __ipw2200_h__
+
+#define WEXT_USECHANNELS 1
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/version.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/random.h>
+
+#include <linux/firmware.h>
+#include <linux/wireless.h>
+#include <asm/io.h>
+
+#include <net/ieee80211.h>
+
+#define DRV_NAME "ipw2200"
+
+#include <linux/workqueue.h>
+
+#ifndef IRQ_NONE
+typedef void irqreturn_t;
+#define IRQ_NONE
+#define IRQ_HANDLED
+#define IRQ_RETVAL(x)
+#endif
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9) )
+#define __iomem
+#endif
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) )
+#define pci_dma_sync_single_for_cpu pci_dma_sync_single
+#define pci_dma_sync_single_for_device pci_dma_sync_single
+#endif
+
+#ifndef HAVE_FREE_NETDEV
+#define free_netdev(x) kfree(x)
+#endif
+
+/* Authentication and Association States */
+enum connection_manager_assoc_states
+{
+ CMAS_INIT = 0,
+ CMAS_TX_AUTH_SEQ_1,
+ CMAS_RX_AUTH_SEQ_2,
+ CMAS_AUTH_SEQ_1_PASS,
+ CMAS_AUTH_SEQ_1_FAIL,
+ CMAS_TX_AUTH_SEQ_3,
+ CMAS_RX_AUTH_SEQ_4,
+ CMAS_AUTH_SEQ_2_PASS,
+ CMAS_AUTH_SEQ_2_FAIL,
+ CMAS_AUTHENTICATED,
+ CMAS_TX_ASSOC,
+ CMAS_RX_ASSOC_RESP,
+ CMAS_ASSOCIATED,
+ CMAS_LAST
+};
+
+
+#define IPW_NORMAL 0
+#define IPW_NOWAIT 0
+#define IPW_WAIT (1<<0)
+#define IPW_QUIET (1<<1)
+#define IPW_ROAMING (1<<2)
+
+#define IPW_POWER_MODE_CAM 0x00 //(always on)
+#define IPW_POWER_INDEX_1 0x01
+#define IPW_POWER_INDEX_2 0x02
+#define IPW_POWER_INDEX_3 0x03
+#define IPW_POWER_INDEX_4 0x04
+#define IPW_POWER_INDEX_5 0x05
+#define IPW_POWER_AC 0x06
+#define IPW_POWER_BATTERY 0x07
+#define IPW_POWER_LIMIT 0x07
+#define IPW_POWER_MASK 0x0F
+#define IPW_POWER_ENABLED 0x10
+#define IPW_POWER_LEVEL(x) ((x) & IPW_POWER_MASK)
+
+#define IPW_CMD_HOST_COMPLETE 2
+#define IPW_CMD_POWER_DOWN 4
+#define IPW_CMD_SYSTEM_CONFIG 6
+#define IPW_CMD_MULTICAST_ADDRESS 7
+#define IPW_CMD_SSID 8
+#define IPW_CMD_ADAPTER_ADDRESS 11
+#define IPW_CMD_PORT_TYPE 12
+#define IPW_CMD_RTS_THRESHOLD 15
+#define IPW_CMD_FRAG_THRESHOLD 16
+#define IPW_CMD_POWER_MODE 17
+#define IPW_CMD_WEP_KEY 18
+#define IPW_CMD_TGI_TX_KEY 19
+#define IPW_CMD_SCAN_REQUEST 20
+#define IPW_CMD_ASSOCIATE 21
+#define IPW_CMD_SUPPORTED_RATES 22
+#define IPW_CMD_SCAN_ABORT 23
+#define IPW_CMD_TX_FLUSH 24
+#define IPW_CMD_QOS_PARAMETERS 25
+#define IPW_CMD_SCAN_REQUEST_EXT 26
+#define IPW_CMD_DINO_CONFIG 30
+#define IPW_CMD_RSN_CAPABILITIES 31
+#define IPW_CMD_RX_KEY 32
+#define IPW_CMD_CARD_DISABLE 33
+#define IPW_CMD_SEED_NUMBER 34
+#define IPW_CMD_TX_POWER 35
+#define IPW_CMD_COUNTRY_INFO 36
+#define IPW_CMD_AIRONET_INFO 37
+#define IPW_CMD_AP_TX_POWER 38
+#define IPW_CMD_CCKM_INFO 39
+#define IPW_CMD_CCX_VER_INFO 40
+#define IPW_CMD_SET_CALIBRATION 41
+#define IPW_CMD_SENSITIVITY_CALIB 42
+#define IPW_CMD_RETRY_LIMIT 51
+#define IPW_CMD_IPW_PRE_POWER_DOWN 58
+#define IPW_CMD_VAP_BEACON_TEMPLATE 60
+#define IPW_CMD_VAP_DTIM_PERIOD 61
+#define IPW_CMD_EXT_SUPPORTED_RATES 62
+#define IPW_CMD_VAP_LOCAL_TX_PWR_CONSTRAINT 63
+#define IPW_CMD_VAP_QUIET_INTERVALS 64
+#define IPW_CMD_VAP_CHANNEL_SWITCH 65
+#define IPW_CMD_VAP_MANDATORY_CHANNELS 66
+#define IPW_CMD_VAP_CELL_PWR_LIMIT 67
+#define IPW_CMD_VAP_CF_PARAM_SET 68
+#define IPW_CMD_VAP_SET_BEACONING_STATE 69
+#define IPW_CMD_MEASUREMENT 80
+#define IPW_CMD_POWER_CAPABILITY 81
+#define IPW_CMD_SUPPORTED_CHANNELS 82
+#define IPW_CMD_TPC_REPORT 83
+#define IPW_CMD_WME_INFO 84
+#define IPW_CMD_PRODUCTION_COMMAND 85
+#define IPW_CMD_LINKSYS_EOU_INFO 90
+
+#define RFD_SIZE 4
+#define NUM_TFD_CHUNKS 6
+
+#define TX_QUEUE_SIZE 32
+#define RX_QUEUE_SIZE 32
+
+#define DINO_CMD_WEP_KEY 0x08
+#define DINO_CMD_TX 0x0B
+#define DCT_ANTENNA_A 0x01
+#define DCT_ANTENNA_B 0x02
+
+#define IPW_A_MODE 0
+#define IPW_B_MODE 1
+#define IPW_G_MODE 2
+
+/*
+ * TX Queue Flag Definitions
+ */
+
+/* abort attempt if mgmt frame is rx'd */
+#define DCT_FLAG_ABORT_MGMT 0x01
+
+/* require CTS */
+#define DCT_FLAG_CTS_REQUIRED 0x02
+
+/* use short preamble */
+#define DCT_FLAG_SHORT_PREMBL 0x04
+
+/* RTS/CTS first */
+#define DCT_FLAG_RTS_REQD 0x08
+
+/* dont calculate duration field */
+#define DCT_FLAG_DUR_SET 0x10
+
+/* even if MAC WEP set (allows pre-encrypt) */
+#define DCT_FLAG_NO_WEP 0x20
+#define IPW_
+/* overwrite TSF field */
+#define DCT_FLAG_TSF_REQD 0x40
+
+/* ACK rx is expected to follow */
+#define DCT_FLAG_ACK_REQD 0x80
+
+#define DCT_FLAG_EXT_MODE_CCK 0x01
+#define DCT_FLAG_EXT_MODE_OFDM 0x00
+
+
+#define TX_RX_TYPE_MASK 0xFF
+#define TX_FRAME_TYPE 0x00
+#define TX_HOST_COMMAND_TYPE 0x01
+#define RX_FRAME_TYPE 0x09
+#define RX_HOST_NOTIFICATION_TYPE 0x03
+#define RX_HOST_CMD_RESPONSE_TYPE 0x04
+#define RX_TX_FRAME_RESPONSE_TYPE 0x05
+#define TFD_NEED_IRQ_MASK 0x04
+
+#define HOST_CMD_DINO_CONFIG 30
+
+#define HOST_NOTIFICATION_STATUS_ASSOCIATED 10
+#define HOST_NOTIFICATION_STATUS_AUTHENTICATE 11
+#define HOST_NOTIFICATION_STATUS_SCAN_CHANNEL_RESULT 12
+#define HOST_NOTIFICATION_STATUS_SCAN_COMPLETED 13
+#define HOST_NOTIFICATION_STATUS_FRAG_LENGTH 14
+#define HOST_NOTIFICATION_STATUS_LINK_DETERIORATION 15
+#define HOST_NOTIFICATION_DINO_CONFIG_RESPONSE 16
+#define HOST_NOTIFICATION_STATUS_BEACON_STATE 17
+#define HOST_NOTIFICATION_STATUS_TGI_TX_KEY 18
+#define HOST_NOTIFICATION_TX_STATUS 19
+#define HOST_NOTIFICATION_CALIB_KEEP_RESULTS 20
+#define HOST_NOTIFICATION_MEASUREMENT_STARTED 21
+#define HOST_NOTIFICATION_MEASUREMENT_ENDED 22
+#define HOST_NOTIFICATION_CHANNEL_SWITCHED 23
+#define HOST_NOTIFICATION_RX_DURING_QUIET_PERIOD 24
+#define HOST_NOTIFICATION_NOISE_STATS 25
+#define HOST_NOTIFICATION_S36_MEASUREMENT_ACCEPTED 30
+#define HOST_NOTIFICATION_S36_MEASUREMENT_REFUSED 31
+
+#define HOST_NOTIFICATION_STATUS_BEACON_MISSING 1
+#define IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT 24
+#define IPW_MB_ROAMING_THRESHOLD_DEFAULT 8
+#define IPW_REAL_RATE_RX_PACKET_THRESHOLD 300
+
+#define MACADRR_BYTE_LEN 6
+
+#define DCR_TYPE_AP 0x01
+#define DCR_TYPE_WLAP 0x02
+#define DCR_TYPE_MU_ESS 0x03
+#define DCR_TYPE_MU_IBSS 0x04
+#define DCR_TYPE_MU_PIBSS 0x05
+#define DCR_TYPE_SNIFFER 0x06
+#define DCR_TYPE_MU_BSS DCR_TYPE_MU_ESS
+
+/**
+ * Generic queue structure
+ *
+ * Contains common data for Rx and Tx queues
+ */
+struct clx2_queue {
+ int n_bd; /**< number of BDs in this queue */
+ int first_empty; /**< 1-st empty entry (index) */
+ int last_used; /**< last used entry (index) */
+ u32 reg_w; /**< 'write' reg (queue head), addr in domain 1 */
+ u32 reg_r; /**< 'read' reg (queue tail), addr in domain 1 */
+ dma_addr_t dma_addr; /**< physical addr for BD's */
+ int low_mark; /**< low watermark, resume queue if free space more than this */
+ int high_mark; /**< high watermark, stop queue if free space less than this */
+} __attribute__ ((packed));
+
+struct machdr32
+{
+ u16 frame_ctl;
+ u16 duration; // watch out for endians!
+ u8 addr1[ MACADRR_BYTE_LEN ];
+ u8 addr2[ MACADRR_BYTE_LEN ];
+ u8 addr3[ MACADRR_BYTE_LEN ];
+ u16 seq_ctrl; // more endians!
+ u8 addr4[ MACADRR_BYTE_LEN ];
+ u16 qos_ctrl;
+} __attribute__ ((packed)) ;
+
+struct machdr30
+{
+ u16 frame_ctl;
+ u16 duration; // watch out for endians!
+ u8 addr1[ MACADRR_BYTE_LEN ];
+ u8 addr2[ MACADRR_BYTE_LEN ];
+ u8 addr3[ MACADRR_BYTE_LEN ];
+ u16 seq_ctrl; // more endians!
+ u8 addr4[ MACADRR_BYTE_LEN ];
+} __attribute__ ((packed)) ;
+
+struct machdr26
+{
+ u16 frame_ctl;
+ u16 duration; // watch out for endians!
+ u8 addr1[ MACADRR_BYTE_LEN ];
+ u8 addr2[ MACADRR_BYTE_LEN ];
+ u8 addr3[ MACADRR_BYTE_LEN ];
+ u16 seq_ctrl; // more endians!
+ u16 qos_ctrl;
+} __attribute__ ((packed)) ;
+
+struct machdr24
+{
+ u16 frame_ctl;
+ u16 duration; // watch out for endians!
+ u8 addr1[ MACADRR_BYTE_LEN ];
+ u8 addr2[ MACADRR_BYTE_LEN ];
+ u8 addr3[ MACADRR_BYTE_LEN ];
+ u16 seq_ctrl; // more endians!
+} __attribute__ ((packed)) ;
+
+// TX TFD with 32 byte MAC Header
+struct tx_tfd_32
+{
+ struct machdr32 mchdr; // 32
+ u32 uivplaceholder[2]; // 8
+} __attribute__ ((packed)) ;
+
+// TX TFD with 30 byte MAC Header
+struct tx_tfd_30
+{
+ struct machdr30 mchdr; // 30
+ u8 reserved[2]; // 2
+ u32 uivplaceholder[2]; // 8
+} __attribute__ ((packed)) ;
+
+// tx tfd with 26 byte mac header
+struct tx_tfd_26
+{
+ struct machdr26 mchdr; // 26
+ u8 reserved1[2]; // 2
+ u32 uivplaceholder[2]; // 8
+ u8 reserved2[4]; // 4
+} __attribute__ ((packed)) ;
+
+// tx tfd with 24 byte mac header
+struct tx_tfd_24
+{
+ struct machdr24 mchdr; // 24
+ u32 uivplaceholder[2]; // 8
+ u8 reserved[8]; // 8
+} __attribute__ ((packed)) ;
+
+
+#define DCT_WEP_KEY_FIELD_LENGTH 16
+
+struct tfd_command
+{
+ u8 index;
+ u8 length;
+ u16 reserved;
+ u8 payload[0];
+} __attribute__ ((packed)) ;
+
+struct tfd_data {
+ /* Header */
+ u32 work_area_ptr;
+ u8 station_number; /* 0 for BSS */
+ u8 reserved1;
+ u16 reserved2;
+
+ /* Tx Parameters */
+ u8 cmd_id;
+ u8 seq_num;
+ u16 len;
+ u8 priority;
+ u8 tx_flags;
+ u8 tx_flags_ext;
+ u8 key_index;
+ u8 wepkey[DCT_WEP_KEY_FIELD_LENGTH];
+ u8 rate;
+ u8 antenna;
+ u16 next_packet_duration;
+ u16 next_frag_len;
+ u16 back_off_counter; //////txop;
+ u8 retrylimit;
+ u16 cwcurrent;
+ u8 reserved3;
+
+ /* 802.11 MAC Header */
+ union
+ {
+ struct tx_tfd_24 tfd_24;
+ struct tx_tfd_26 tfd_26;
+ struct tx_tfd_30 tfd_30;
+ struct tx_tfd_32 tfd_32;
+ } tfd;
+
+ /* Payload DMA info */
+ u32 num_chunks;
+ u32 chunk_ptr[NUM_TFD_CHUNKS];
+ u16 chunk_len[NUM_TFD_CHUNKS];
+} __attribute__ ((packed));
+
+struct txrx_control_flags
+{
+ u8 message_type;
+ u8 rx_seq_num;
+ u8 control_bits;
+ u8 reserved;
+} __attribute__ ((packed));
+
+#define TFD_SIZE 128
+#define TFD_CMD_IMMEDIATE_PAYLOAD_LENGTH (TFD_SIZE - sizeof(struct txrx_control_flags))
+
+struct tfd_frame
+{
+ struct txrx_control_flags control_flags;
+ union {
+ struct tfd_data data;
+ struct tfd_command cmd;
+ u8 raw[TFD_CMD_IMMEDIATE_PAYLOAD_LENGTH];
+ } u;
+} __attribute__ ((packed)) ;
+
+typedef void destructor_func(const void*);
+
+/**
+ * Tx Queue for DMA. Queue consists of circular buffer of
+ * BD's and required locking structures.
+ */
+struct clx2_tx_queue {
+ struct clx2_queue q;
+ struct tfd_frame* bd;
+ struct ieee80211_txb **txb;
+};
+
+/*
+ * RX related structures and functions
+ */
+#define RX_FREE_BUFFERS 32
+#define RX_LOW_WATERMARK 8
+
+#define SUP_RATE_11A_MAX_NUM_CHANNELS (8)
+#define SUP_RATE_11B_MAX_NUM_CHANNELS (4)
+#define SUP_RATE_11G_MAX_NUM_CHANNELS (12)
+
+// Used for passing to driver number of successes and failures per rate
+struct rate_histogram
+{
+ union {
+ u32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
+ u32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
+ u32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
+ } success;
+ union {
+ u32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
+ u32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
+ u32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
+ } failed;
+} __attribute__ ((packed));
+
+/* statistics command response */
+struct ipw_cmd_stats {
+ u8 cmd_id;
+ u8 seq_num;
+ u16 good_sfd;
+ u16 bad_plcp;
+ u16 wrong_bssid;
+ u16 valid_mpdu;
+ u16 bad_mac_header;
+ u16 reserved_frame_types;
+ u16 rx_ina;
+ u16 bad_crc32;
+ u16 invalid_cts;
+ u16 invalid_acks;
+ u16 long_distance_ina_fina;
+ u16 dsp_silence_unreachable;
+ u16 accumulated_rssi;
+ u16 rx_ovfl_frame_tossed;
+ u16 rssi_silence_threshold;
+ u16 rx_ovfl_frame_supplied;
+ u16 last_rx_frame_signal;
+ u16 last_rx_frame_noise;
+ u16 rx_autodetec_no_ofdm;
+ u16 rx_autodetec_no_barker;
+ u16 reserved;
+} __attribute__ ((packed));
+
+struct notif_channel_result {
+ u8 channel_num;
+ struct ipw_cmd_stats stats;
+ u8 uReserved;
+} __attribute__ ((packed));
+
+struct notif_scan_complete {
+ u8 scan_type;
+ u8 num_channels;
+ u8 status;
+ u8 reserved;
+} __attribute__ ((packed));
+
+struct notif_frag_length {
+ u16 frag_length;
+ u16 reserved;
+} __attribute__ ((packed));
+
+struct notif_beacon_state {
+ u32 state;
+ u32 number;
+} __attribute__ ((packed));
+
+struct notif_tgi_tx_key {
+ u8 key_state;
+ u8 security_type;
+ u8 station_index;
+ u8 reserved;
+} __attribute__ ((packed));
+
+struct notif_link_deterioration {
+ struct ipw_cmd_stats stats;
+ u8 rate;
+ u8 modulation;
+ struct rate_histogram histogram;
+ u8 reserved1;
+ u16 reserved2;
+} __attribute__ ((packed));
+
+struct notif_association {
+ u8 state;
+} __attribute__ ((packed));
+
+struct notif_authenticate {
+ u8 state;
+ struct machdr24 addr;
+ u16 status;
+} __attribute__ ((packed));
+
+struct temperature
+{
+ s32 measured;
+ s32 active;
+} __attribute__ ((packed));
+
+struct notif_calibration {
+ u8 data[104];
+} __attribute__ ((packed));
+
+struct notif_noise {
+ u32 value;
+} __attribute__ ((packed));
+
+struct ipw_rx_notification {
+ u8 reserved[8];
+ u8 subtype;
+ u8 flags;
+ u16 size;
+ union {
+ struct notif_association assoc;
+ struct notif_authenticate auth;
+ struct notif_channel_result channel_result;
+ struct notif_scan_complete scan_complete;
+ struct notif_frag_length frag_len;
+ struct notif_beacon_state beacon_state;
+ struct notif_tgi_tx_key tgi_tx_key;
+ struct notif_link_deterioration link_deterioration;
+ struct notif_calibration calibration;
+ struct notif_noise noise;
+ u8 raw[0];
+ } u;
+} __attribute__ ((packed));
+
+struct ipw_rx_frame {
+ u32 reserved1;
+ u8 parent_tsf[4]; // fw_use[0] is boolean for OUR_TSF_IS_GREATER
+ u8 received_channel; // The channel that this frame was received on.
+ // Note that for .11b this does not have to be
+ // the same as the channel that it was sent.
+ // Filled by LMAC
+ u8 frameStatus;
+ u8 rate;
+ u8 rssi;
+ u8 agc;
+ u8 rssi_dbm;
+ u16 signal;
+ u16 noise;
+ u8 antennaAndPhy;
+ u8 control; // control bit should be on in bg
+ u8 rtscts_rate; // rate of rts or cts (in rts cts sequence rate
+ // is identical)
+ u8 rtscts_seen; // 0x1 RTS seen ; 0x2 CTS seen
+ u16 length;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct ipw_rx_header {
+ u8 message_type;
+ u8 rx_seq_num;
+ u8 control_bits;
+ u8 reserved;
+} __attribute__ ((packed));
+
+struct ipw_rx_packet
+{
+ struct ipw_rx_header header;
+ union {
+ struct ipw_rx_frame frame;
+ struct ipw_rx_notification notification;
+ } u;
+} __attribute__ ((packed));
+
+#define IPW_RX_NOTIFICATION_SIZE sizeof(struct ipw_rx_header) + 12
+#define IPW_RX_FRAME_SIZE sizeof(struct ipw_rx_header) + \
+ sizeof(struct ipw_rx_frame)
+
+struct ipw_rx_mem_buffer {
+ dma_addr_t dma_addr;
+ struct ipw_rx_buffer *rxb;
+ struct sk_buff *skb;
+ struct list_head list;
+}; /* Not transferred over network, so not __attribute__ ((packed)) */
+
+struct ipw_rx_queue {
+ struct ipw_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
+ struct ipw_rx_mem_buffer *queue[RX_QUEUE_SIZE];
+ u32 processed; /* Internal index to last handled Rx packet */
+ u32 read; /* Shared index to newest available Rx buffer */
+ u32 write; /* Shared index to oldest written Rx packet */
+ u32 free_count;/* Number of pre-allocated buffers in rx_free */
+ /* Each of these lists is used as a FIFO for ipw_rx_mem_buffers */
+ struct list_head rx_free; /* Own an SKBs */
+ struct list_head rx_used; /* No SKB allocated */
+ spinlock_t lock;
+}; /* Not transferred over network, so not __attribute__ ((packed)) */
+
+
+struct alive_command_responce {
+ u8 alive_command;
+ u8 sequence_number;
+ u16 software_revision;
+ u8 device_identifier;
+ u8 reserved1[5];
+ u16 reserved2;
+ u16 reserved3;
+ u16 clock_settle_time;
+ u16 powerup_settle_time;
+ u16 reserved4;
+ u8 time_stamp[5]; /* month, day, year, hours, minutes */
+ u8 ucode_valid;
+} __attribute__ ((packed));
+
+#define IPW_MAX_RATES 12
+
+struct ipw_rates {
+ u8 num_rates;
+ u8 rates[IPW_MAX_RATES];
+} __attribute__ ((packed));
+
+struct command_block
+{
+ unsigned int control;
+ u32 source_addr;
+ u32 dest_addr;
+ unsigned int status;
+} __attribute__ ((packed));
+
+#define CB_NUMBER_OF_ELEMENTS_SMALL 64
+struct fw_image_desc
+{
+ unsigned long last_cb_index;
+ unsigned long current_cb_index;
+ struct command_block cb_list[CB_NUMBER_OF_ELEMENTS_SMALL];
+ void * v_addr;
+ unsigned long p_addr;
+ unsigned long len;
+};
+
+struct ipw_sys_config
+{
+ u8 bt_coexistence;
+ u8 reserved1;
+ u8 answer_broadcast_ssid_probe;
+ u8 accept_all_data_frames;
+ u8 accept_non_directed_frames;
+ u8 exclude_unicast_unencrypted;
+ u8 disable_unicast_decryption;
+ u8 exclude_multicast_unencrypted;
+ u8 disable_multicast_decryption;
+ u8 antenna_diversity;
+ u8 pass_crc_to_host;
+ u8 dot11g_auto_detection;
+ u8 enable_cts_to_self;
+ u8 enable_multicast_filtering;
+ u8 bt_coexist_collision_thr;
+ u8 reserved2;
+ u8 accept_all_mgmt_bcpr;
+ u8 accept_all_mgtm_frames;
+ u8 pass_noise_stats_to_host;
+ u8 reserved3;
+} __attribute__ ((packed));
+
+struct ipw_multicast_addr
+{
+ u8 num_of_multicast_addresses;
+ u8 reserved[3];
+ u8 mac1[6];
+ u8 mac2[6];
+ u8 mac3[6];
+ u8 mac4[6];
+} __attribute__ ((packed));
+
+struct ipw_wep_key
+{
+ u8 cmd_id;
+ u8 seq_num;
+ u8 key_index;
+ u8 key_size;
+ u8 key[16];
+} __attribute__ ((packed));
+
+struct ipw_tgi_tx_key
+{
+ u8 key_id;
+ u8 security_type;
+ u8 station_index;
+ u8 flags;
+ u8 key[16];
+ u32 tx_counter[2];
+} __attribute__ ((packed));
+
+#define IPW_SCAN_CHANNELS 54
+
+struct ipw_scan_request
+{
+ u8 scan_type;
+ u16 dwell_time;
+ u8 channels_list[IPW_SCAN_CHANNELS];
+ u8 channels_reserved[3];
+} __attribute__ ((packed));
+
+enum {
+ IPW_SCAN_PASSIVE_TILL_FIRST_BEACON_SCAN = 0,
+ IPW_SCAN_PASSIVE_FULL_DWELL_SCAN,
+ IPW_SCAN_ACTIVE_DIRECT_SCAN,
+ IPW_SCAN_ACTIVE_BROADCAST_SCAN,
+ IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN,
+ IPW_SCAN_TYPES
+};
+
+struct ipw_scan_request_ext
+{
+ u32 full_scan_index;
+ u8 channels_list[IPW_SCAN_CHANNELS];
+ u8 scan_type[IPW_SCAN_CHANNELS / 2];
+ u8 reserved;
+ u16 dwell_time[IPW_SCAN_TYPES];
+} __attribute__ ((packed));
+
+extern inline u8 ipw_get_scan_type(struct ipw_scan_request_ext *scan, u8 index)
+{
+ if (index % 2)
+ return scan->scan_type[index / 2] & 0x0F;
+ else
+ return (scan->scan_type[index / 2] & 0xF0) >> 4;
+}
+
+extern inline void ipw_set_scan_type(struct ipw_scan_request_ext *scan,
+ u8 index, u8 scan_type)
+{
+ if (index % 2)
+ scan->scan_type[index / 2] =
+ (scan->scan_type[index / 2] & 0xF0) |
+ (scan_type & 0x0F);
+ else
+ scan->scan_type[index / 2] =
+ (scan->scan_type[index / 2] & 0x0F) |
+ ((scan_type & 0x0F) << 4);
+}
+
+struct ipw_associate
+{
+ u8 channel;
+ u8 auth_type:4,
+ auth_key:4;
+ u8 assoc_type;
+ u8 reserved;
+ u16 policy_support;
+ u8 preamble_length;
+ u8 ieee_mode;
+ u8 bssid[ETH_ALEN];
+ u32 assoc_tsf_msw;
+ u32 assoc_tsf_lsw;
+ u16 capability;
+ u16 listen_interval;
+ u16 beacon_interval;
+ u8 dest[ETH_ALEN];
+ u16 atim_window;
+ u8 smr;
+ u8 reserved1;
+ u16 reserved2;
+} __attribute__ ((packed));
+
+struct ipw_supported_rates
+{
+ u8 ieee_mode;
+ u8 num_rates;
+ u8 purpose;
+ u8 reserved;
+ u8 supported_rates[IPW_MAX_RATES];
+} __attribute__ ((packed));
+
+struct ipw_rts_threshold
+{
+ u16 rts_threshold;
+ u16 reserved;
+} __attribute__ ((packed));
+
+struct ipw_frag_threshold
+{
+ u16 frag_threshold;
+ u16 reserved;
+} __attribute__ ((packed));
+
+struct ipw_retry_limit
+{
+ u8 short_retry_limit;
+ u8 long_retry_limit;
+ u16 reserved;
+} __attribute__ ((packed));
+
+struct ipw_dino_config
+{
+ u32 dino_config_addr;
+ u16 dino_config_size;
+ u8 dino_response;
+ u8 reserved;
+} __attribute__ ((packed));
+
+struct ipw_aironet_info
+{
+ u8 id;
+ u8 length;
+ u16 reserved;
+} __attribute__ ((packed));
+
+struct ipw_rx_key
+{
+ u8 station_index;
+ u8 key_type;
+ u8 key_id;
+ u8 key_flag;
+ u8 key[16];
+ u8 station_address[6];
+ u8 key_index;
+ u8 reserved;
+} __attribute__ ((packed));
+
+struct ipw_country_channel_info
+{
+ u8 first_channel;
+ u8 no_channels;
+ s8 max_tx_power;
+} __attribute__ ((packed));
+
+struct ipw_country_info
+{
+ u8 id;
+ u8 length;
+ u8 country_str[3];
+ struct ipw_country_channel_info groups[7];
+} __attribute__ ((packed));
+
+struct ipw_channel_tx_power
+{
+ u8 channel_number;
+ s8 tx_power;
+} __attribute__ ((packed));
+
+#define SCAN_ASSOCIATED_INTERVAL (HZ)
+#define SCAN_INTERVAL (HZ / 10)
+#define MAX_A_CHANNELS 37
+#define MAX_B_CHANNELS 14
+
+struct ipw_tx_power
+{
+ u8 num_channels;
+ u8 ieee_mode;
+ struct ipw_channel_tx_power channels_tx_power[MAX_A_CHANNELS];
+} __attribute__ ((packed));
+
+struct ipw_qos_parameters
+{
+ u16 cw_min[4];
+ u16 cw_max[4];
+ u8 aifs[4];
+ u8 flag[4];
+ u16 tx_op_limit[4];
+} __attribute__ ((packed));
+
+struct ipw_rsn_capabilities
+{
+ u8 id;
+ u8 length;
+ u16 version;
+} __attribute__ ((packed));
+
+struct ipw_sensitivity_calib
+{
+ u16 beacon_rssi_raw;
+ u16 reserved;
+} __attribute__ ((packed));
+
+/**
+ * Host command structure.
+ *
+ * On input, the following fields should be filled:
+ * - cmd
+ * - len
+ * - status_len
+ * - param (if needed)
+ *
+ * On output,
+ * - \a status contains status;
+ * - \a param filled with status parameters.
+ */
+struct ipw_cmd {
+ u32 cmd; /**< Host command */
+ u32 status; /**< Status */
+ u32 status_len; /**< How many 32 bit parameters in the status */
+ u32 len; /**< incoming parameters length, bytes */
+ /**
+ * command parameters.
+ * There should be enough space for incoming and
+ * outcoming parameters.
+ * Incoming parameters listed 1-st, followed by outcoming params.
+ * nParams=(len+3)/4+status_len
+ */
+ u32 param[0];
+} __attribute__ ((packed));
+
+#define STATUS_HCMD_ACTIVE (1<<0) /**< host command in progress */
+
+#define STATUS_INT_ENABLED (1<<1)
+#define STATUS_RF_KILL_HW (1<<2)
+#define STATUS_RF_KILL_SW (1<<3)
+#define STATUS_RF_KILL_MASK (STATUS_RF_KILL_HW | STATUS_RF_KILL_SW)
+
+#define STATUS_INIT (1<<5)
+#define STATUS_AUTH (1<<6)
+#define STATUS_ASSOCIATED (1<<7)
+#define STATUS_STATE_MASK (STATUS_INIT | STATUS_AUTH | STATUS_ASSOCIATED)
+
+#define STATUS_ASSOCIATING (1<<8)
+#define STATUS_DISASSOCIATING (1<<9)
+#define STATUS_ROAMING (1<<10)
+#define STATUS_EXIT_PENDING (1<<11)
+#define STATUS_DISASSOC_PENDING (1<<12)
+#define STATUS_STATE_PENDING (1<<13)
+
+#define STATUS_SCAN_PENDING (1<<20)
+#define STATUS_SCANNING (1<<21)
+#define STATUS_SCAN_ABORTING (1<<22)
+
+#define STATUS_INDIRECT_BYTE (1<<28) /* sysfs entry configured for access */
+#define STATUS_INDIRECT_DWORD (1<<29) /* sysfs entry configured for access */
+#define STATUS_DIRECT_DWORD (1<<30) /* sysfs entry configured for access */
+
+#define STATUS_SECURITY_UPDATED (1<<31) /* Security sync needed */
+
+#define CFG_STATIC_CHANNEL (1<<0) /* Restrict assoc. to single channel */
+#define CFG_STATIC_ESSID (1<<1) /* Restrict assoc. to single SSID */
+#define CFG_STATIC_BSSID (1<<2) /* Restrict assoc. to single BSSID */
+#define CFG_CUSTOM_MAC (1<<3)
+#define CFG_PREAMBLE (1<<4)
+#define CFG_ADHOC_PERSIST (1<<5)
+#define CFG_ASSOCIATE (1<<6)
+#define CFG_FIXED_RATE (1<<7)
+#define CFG_ADHOC_CREATE (1<<8)
+
+#define CAP_SHARED_KEY (1<<0) /* Off = OPEN */
+#define CAP_PRIVACY_ON (1<<1) /* Off = No privacy */
+
+#define MAX_STATIONS 32
+#define IPW_INVALID_STATION (0xff)
+
+struct ipw_station_entry {
+ u8 mac_addr[ETH_ALEN];
+ u8 reserved;
+ u8 support_mode;
+};
+
+#define AVG_ENTRIES 8
+struct average {
+ s16 entries[AVG_ENTRIES];
+ u8 pos;
+ u8 init;
+ s32 sum;
+};
+
+struct ipw_priv {
+ /* ieee device used by generic ieee processing code */
+ struct ieee80211_device *ieee;
+ struct ieee80211_security sec;
+
+ /* spinlock */
+ spinlock_t lock;
+
+ /* basic pci-network driver stuff */
+ struct pci_dev *pci_dev;
+ struct net_device *net_dev;
+
+ /* pci hardware address support */
+ void __iomem *hw_base;
+ unsigned long hw_len;
+
+ struct fw_image_desc sram_desc;
+
+ /* result of ucode download */
+ struct alive_command_responce dino_alive;
+
+ wait_queue_head_t wait_command_queue;
+ wait_queue_head_t wait_state;
+
+ /* Rx and Tx DMA processing queues */
+ struct ipw_rx_queue *rxq;
+ struct clx2_tx_queue txq_cmd;
+ struct clx2_tx_queue txq[4];
+ u32 status;
+ u32 config;
+ u32 capability;
+
+ u8 last_rx_rssi;
+ u8 last_noise;
+ struct average average_missed_beacons;
+ struct average average_rssi;
+ struct average average_noise;
+ u32 port_type;
+ int rx_bufs_min; /**< minimum number of bufs in Rx queue */
+ int rx_pend_max; /**< maximum pending buffers for one IRQ */
+ u32 hcmd_seq; /**< sequence number for hcmd */
+ u32 missed_beacon_threshold;
+ u32 roaming_threshold;
+
+ struct ipw_associate assoc_request;
+ struct ieee80211_network *assoc_network;
+
+ unsigned long ts_scan_abort;
+ struct ipw_supported_rates rates;
+ struct ipw_rates phy[3]; /**< PHY restrictions, per band */
+ struct ipw_rates supp; /**< software defined */
+ struct ipw_rates extended; /**< use for corresp. IE, AP only */
+
+ struct notif_link_deterioration last_link_deterioration; /** for statistics */
+ struct ipw_cmd* hcmd; /**< host command currently executed */
+
+ wait_queue_head_t hcmd_wq; /**< host command waits for execution */
+ u32 tsf_bcn[2]; /**< TSF from latest beacon */
+
+ struct notif_calibration calib; /**< last calibration */
+
+ /* ordinal interface with firmware */
+ u32 table0_addr;
+ u32 table0_len;
+ u32 table1_addr;
+ u32 table1_len;
+ u32 table2_addr;
+ u32 table2_len;
+
+ /* context information */
+ u8 essid[IW_ESSID_MAX_SIZE];
+ u8 essid_len;
+ u8 nick[IW_ESSID_MAX_SIZE];
+ u16 rates_mask;
+ u8 channel;
+ struct ipw_sys_config sys_config;
+ u32 power_mode;
+ u8 bssid[ETH_ALEN];
+ u16 rts_threshold;
+ u8 mac_addr[ETH_ALEN];
+ u8 num_stations;
+ u8 stations[MAX_STATIONS][ETH_ALEN];
+
+ u32 notif_missed_beacons;
+
+ /* Statistics and counters normalized with each association */
+ u32 last_missed_beacons;
+ u32 last_tx_packets;
+ u32 last_rx_packets;
+ u32 last_tx_failures;
+ u32 last_rx_err;
+ u32 last_rate;
+
+ u32 missed_adhoc_beacons;
+ u32 missed_beacons;
+ u32 rx_packets;
+ u32 tx_packets;
+ u32 quality;
+
+ /* eeprom */
+ u8 eeprom[0x100]; /* 256 bytes of eeprom */
+ int eeprom_delay;
+
+ struct iw_statistics wstats;
+
+ struct workqueue_struct *workqueue;
+
+ struct work_struct adhoc_check;
+ struct work_struct associate;
+ struct work_struct disassociate;
+ struct work_struct rx_replenish;
+ struct work_struct request_scan;
+ struct work_struct adapter_restart;
+ struct work_struct rf_kill;
+ struct work_struct up;
+ struct work_struct down;
+ struct work_struct gather_stats;
+ struct work_struct abort_scan;
+ struct work_struct roam;
+ struct work_struct scan_check;
+
+ struct tasklet_struct irq_tasklet;
+
+
+#define IPW_2200BG 1
+#define IPW_2915ABG 2
+ u8 adapter;
+
+#define IPW_DEFAULT_TX_POWER 0x14
+ u8 tx_power;
+
+#ifdef CONFIG_PM
+ u32 pm_state[16];
+#endif
+
+ /* network state */
+
+ /* Used to pass the current INTA value from ISR to Tasklet */
+ u32 isr_inta;
+
+ /* debugging info */
+ u32 indirect_dword;
+ u32 direct_dword;
+ u32 indirect_byte;
+}; /*ipw_priv */
+
+
+/* debug macros */
+
+#ifdef CONFIG_IPW_DEBUG
+#define IPW_DEBUG(level, fmt, args...) \
+do { if (ipw_debug_level & (level)) \
+ printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \
+ in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+#else
+#define IPW_DEBUG(level, fmt, args...) do {} while (0)
+#endif /* CONFIG_IPW_DEBUG */
+
+/*
+ * To use the debug system;
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define IPW_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry. xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a IPW_xxxx_DEBUG() macro definition for your
+ * classification, or use IPW_DEBUG(IPW_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ipw/debug_level
+ *
+ * you simply need to add your entry to the ipw_debug_levels array.
+ *
+ * If you do not see debug_level in /proc/net/ipw then you do not have
+ * CONFIG_IPW_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define IPW_DL_ERROR (1<<0)
+#define IPW_DL_WARNING (1<<1)
+#define IPW_DL_INFO (1<<2)
+#define IPW_DL_WX (1<<3)
+#define IPW_DL_HOST_COMMAND (1<<5)
+#define IPW_DL_STATE (1<<6)
+
+#define IPW_DL_NOTIF (1<<10)
+#define IPW_DL_SCAN (1<<11)
+#define IPW_DL_ASSOC (1<<12)
+#define IPW_DL_DROP (1<<13)
+#define IPW_DL_IOCTL (1<<14)
+
+#define IPW_DL_MANAGE (1<<15)
+#define IPW_DL_FW (1<<16)
+#define IPW_DL_RF_KILL (1<<17)
+#define IPW_DL_FW_ERRORS (1<<18)
+
+
+#define IPW_DL_ORD (1<<20)
+
+#define IPW_DL_FRAG (1<<21)
+#define IPW_DL_WEP (1<<22)
+#define IPW_DL_TX (1<<23)
+#define IPW_DL_RX (1<<24)
+#define IPW_DL_ISR (1<<25)
+#define IPW_DL_FW_INFO (1<<26)
+#define IPW_DL_IO (1<<27)
+#define IPW_DL_TRACE (1<<28)
+
+#define IPW_DL_STATS (1<<29)
+
+
+#define IPW_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a)
+#define IPW_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a)
+#define IPW_DEBUG_INFO(f, a...) IPW_DEBUG(IPW_DL_INFO, f, ## a)
+
+#define IPW_DEBUG_WX(f, a...) IPW_DEBUG(IPW_DL_WX, f, ## a)
+#define IPW_DEBUG_SCAN(f, a...) IPW_DEBUG(IPW_DL_SCAN, f, ## a)
+#define IPW_DEBUG_STATUS(f, a...) IPW_DEBUG(IPW_DL_STATUS, f, ## a)
+#define IPW_DEBUG_TRACE(f, a...) IPW_DEBUG(IPW_DL_TRACE, f, ## a)
+#define IPW_DEBUG_RX(f, a...) IPW_DEBUG(IPW_DL_RX, f, ## a)
+#define IPW_DEBUG_TX(f, a...) IPW_DEBUG(IPW_DL_TX, f, ## a)
+#define IPW_DEBUG_ISR(f, a...) IPW_DEBUG(IPW_DL_ISR, f, ## a)
+#define IPW_DEBUG_MANAGEMENT(f, a...) IPW_DEBUG(IPW_DL_MANAGE, f, ## a)
+#define IPW_DEBUG_WEP(f, a...) IPW_DEBUG(IPW_DL_WEP, f, ## a)
+#define IPW_DEBUG_HC(f, a...) IPW_DEBUG(IPW_DL_HOST_COMMAND, f, ## a)
+#define IPW_DEBUG_FRAG(f, a...) IPW_DEBUG(IPW_DL_FRAG, f, ## a)
+#define IPW_DEBUG_FW(f, a...) IPW_DEBUG(IPW_DL_FW, f, ## a)
+#define IPW_DEBUG_RF_KILL(f, a...) IPW_DEBUG(IPW_DL_RF_KILL, f, ## a)
+#define IPW_DEBUG_DROP(f, a...) IPW_DEBUG(IPW_DL_DROP, f, ## a)
+#define IPW_DEBUG_IO(f, a...) IPW_DEBUG(IPW_DL_IO, f, ## a)
+#define IPW_DEBUG_ORD(f, a...) IPW_DEBUG(IPW_DL_ORD, f, ## a)
+#define IPW_DEBUG_FW_INFO(f, a...) IPW_DEBUG(IPW_DL_FW_INFO, f, ## a)
+#define IPW_DEBUG_NOTIF(f, a...) IPW_DEBUG(IPW_DL_NOTIF, f, ## a)
+#define IPW_DEBUG_STATE(f, a...) IPW_DEBUG(IPW_DL_STATE | IPW_DL_ASSOC | IPW_DL_INFO, f, ## a)
+#define IPW_DEBUG_ASSOC(f, a...) IPW_DEBUG(IPW_DL_ASSOC | IPW_DL_INFO, f, ## a)
+#define IPW_DEBUG_STATS(f, a...) IPW_DEBUG(IPW_DL_STATS, f, ## a)
+
+#include <linux/ctype.h>
+
+/*
+* Register bit definitions
+*/
+
+/* Dino control registers bits */
+
+#define DINO_ENABLE_SYSTEM 0x80
+#define DINO_ENABLE_CS 0x40
+#define DINO_RXFIFO_DATA 0x01
+#define DINO_CONTROL_REG 0x00200000
+
+#define CX2_INTA_RW 0x00000008
+#define CX2_INTA_MASK_R 0x0000000C
+#define CX2_INDIRECT_ADDR 0x00000010
+#define CX2_INDIRECT_DATA 0x00000014
+#define CX2_AUTOINC_ADDR 0x00000018
+#define CX2_AUTOINC_DATA 0x0000001C
+#define CX2_RESET_REG 0x00000020
+#define CX2_GP_CNTRL_RW 0x00000024
+
+#define CX2_READ_INT_REGISTER 0xFF4
+
+#define CX2_GP_CNTRL_BIT_INIT_DONE 0x00000004
+
+#define CX2_REGISTER_DOMAIN1_END 0x00001000
+#define CX2_SRAM_READ_INT_REGISTER 0x00000ff4
+
+#define CX2_SHARED_LOWER_BOUND 0x00000200
+#define CX2_INTERRUPT_AREA_LOWER_BOUND 0x00000f80
+
+#define CX2_NIC_SRAM_LOWER_BOUND 0x00000000
+#define CX2_NIC_SRAM_UPPER_BOUND 0x00030000
+
+#define CX2_BIT_INT_HOST_SRAM_READ_INT_REGISTER (1 << 29)
+#define CX2_GP_CNTRL_BIT_CLOCK_READY 0x00000001
+#define CX2_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY 0x00000002
+
+/*
+ * RESET Register Bit Indexes
+ */
+#define CBD_RESET_REG_PRINCETON_RESET 0x00000001 /* Bit 0 (LSB) */
+#define CX2_RESET_REG_SW_RESET 0x00000080 /* Bit 7 */
+#define CX2_RESET_REG_MASTER_DISABLED 0x00000100 /* Bit 8 */
+#define CX2_RESET_REG_STOP_MASTER 0x00000200 /* Bit 9 */
+#define CX2_ARC_KESHET_CONFIG 0x08000000 /* Bit 27 */
+#define CX2_START_STANDBY 0x00000004 /* Bit 2 */
+
+#define CX2_CSR_CIS_UPPER_BOUND 0x00000200
+#define CX2_DOMAIN_0_END 0x1000
+#define CLX_MEM_BAR_SIZE 0x1000
+
+#define CX2_BASEBAND_CONTROL_STATUS 0X00200000
+#define CX2_BASEBAND_TX_FIFO_WRITE 0X00200004
+#define CX2_BASEBAND_RX_FIFO_READ 0X00200004
+#define CX2_BASEBAND_CONTROL_STORE 0X00200010
+
+#define CX2_INTERNAL_CMD_EVENT 0X00300004
+#define CX2_BASEBAND_POWER_DOWN 0x00000001
+
+#define CX2_MEM_HALT_AND_RESET 0x003000e0
+
+/* defgroup bits_halt_reset MEM_HALT_AND_RESET register bits */
+#define CX2_BIT_HALT_RESET_ON 0x80000000
+#define CX2_BIT_HALT_RESET_OFF 0x00000000
+
+#define CB_LAST_VALID 0x20000000
+#define CB_INT_ENABLED 0x40000000
+#define CB_VALID 0x80000000
+#define CB_SRC_LE 0x08000000
+#define CB_DEST_LE 0x04000000
+#define CB_SRC_AUTOINC 0x00800000
+#define CB_SRC_IO_GATED 0x00400000
+#define CB_DEST_AUTOINC 0x00080000
+#define CB_SRC_SIZE_LONG 0x00200000
+#define CB_DEST_SIZE_LONG 0x00020000
+
+
+/* DMA DEFINES */
+
+#define DMA_CONTROL_SMALL_CB_CONST_VALUE 0x00540000
+#define DMA_CB_STOP_AND_ABORT 0x00000C00
+#define DMA_CB_START 0x00000100
+
+
+#define CX2_SHARED_SRAM_SIZE 0x00030000
+#define CX2_SHARED_SRAM_DMA_CONTROL 0x00027000
+#define CB_MAX_LENGTH 0x1FFF
+
+#define CX2_HOST_EEPROM_DATA_SRAM_SIZE 0xA18
+#define CX2_EEPROM_IMAGE_SIZE 0x100
+
+
+/* DMA defs */
+#define CX2_DMA_I_CURRENT_CB 0x003000D0
+#define CX2_DMA_O_CURRENT_CB 0x003000D4
+#define CX2_DMA_I_DMA_CONTROL 0x003000A4
+#define CX2_DMA_I_CB_BASE 0x003000A0
+
+#define CX2_TX_CMD_QUEUE_BD_BASE (0x00000200)
+#define CX2_TX_CMD_QUEUE_BD_SIZE (0x00000204)
+#define CX2_TX_QUEUE_0_BD_BASE (0x00000208)
+#define CX2_TX_QUEUE_0_BD_SIZE (0x0000020C)
+#define CX2_TX_QUEUE_1_BD_BASE (0x00000210)
+#define CX2_TX_QUEUE_1_BD_SIZE (0x00000214)
+#define CX2_TX_QUEUE_2_BD_BASE (0x00000218)
+#define CX2_TX_QUEUE_2_BD_SIZE (0x0000021C)
+#define CX2_TX_QUEUE_3_BD_BASE (0x00000220)
+#define CX2_TX_QUEUE_3_BD_SIZE (0x00000224)
+#define CX2_RX_BD_BASE (0x00000240)
+#define CX2_RX_BD_SIZE (0x00000244)
+#define CX2_RFDS_TABLE_LOWER (0x00000500)
+
+#define CX2_TX_CMD_QUEUE_READ_INDEX (0x00000280)
+#define CX2_TX_QUEUE_0_READ_INDEX (0x00000284)
+#define CX2_TX_QUEUE_1_READ_INDEX (0x00000288)
+#define CX2_TX_QUEUE_2_READ_INDEX (0x0000028C)
+#define CX2_TX_QUEUE_3_READ_INDEX (0x00000290)
+#define CX2_RX_READ_INDEX (0x000002A0)
+
+#define CX2_TX_CMD_QUEUE_WRITE_INDEX (0x00000F80)
+#define CX2_TX_QUEUE_0_WRITE_INDEX (0x00000F84)
+#define CX2_TX_QUEUE_1_WRITE_INDEX (0x00000F88)
+#define CX2_TX_QUEUE_2_WRITE_INDEX (0x00000F8C)
+#define CX2_TX_QUEUE_3_WRITE_INDEX (0x00000F90)
+#define CX2_RX_WRITE_INDEX (0x00000FA0)
+
+/*
+ * EEPROM Related Definitions
+ */
+
+#define IPW_EEPROM_DATA_SRAM_ADDRESS (CX2_SHARED_LOWER_BOUND + 0x814)
+#define IPW_EEPROM_DATA_SRAM_SIZE (CX2_SHARED_LOWER_BOUND + 0x818)
+#define IPW_EEPROM_LOAD_DISABLE (CX2_SHARED_LOWER_BOUND + 0x81C)
+#define IPW_EEPROM_DATA (CX2_SHARED_LOWER_BOUND + 0x820)
+#define IPW_EEPROM_UPPER_ADDRESS (CX2_SHARED_LOWER_BOUND + 0x9E0)
+
+#define IPW_STATION_TABLE_LOWER (CX2_SHARED_LOWER_BOUND + 0xA0C)
+#define IPW_STATION_TABLE_UPPER (CX2_SHARED_LOWER_BOUND + 0xB0C)
+#define IPW_REQUEST_ATIM (CX2_SHARED_LOWER_BOUND + 0xB0C)
+#define IPW_ATIM_SENT (CX2_SHARED_LOWER_BOUND + 0xB10)
+#define IPW_WHO_IS_AWAKE (CX2_SHARED_LOWER_BOUND + 0xB14)
+#define IPW_DURING_ATIM_WINDOW (CX2_SHARED_LOWER_BOUND + 0xB18)
+
+
+#define MSB 1
+#define LSB 0
+#define WORD_TO_BYTE(_word) ((_word) * sizeof(u16))
+
+#define GET_EEPROM_ADDR(_wordoffset,_byteoffset) \
+ ( WORD_TO_BYTE(_wordoffset) + (_byteoffset) )
+
+/* EEPROM access by BYTE */
+#define EEPROM_PME_CAPABILITY (GET_EEPROM_ADDR(0x09,MSB)) /* 1 byte */
+#define EEPROM_MAC_ADDRESS (GET_EEPROM_ADDR(0x21,LSB)) /* 6 byte */
+#define EEPROM_VERSION (GET_EEPROM_ADDR(0x24,MSB)) /* 1 byte */
+#define EEPROM_NIC_TYPE (GET_EEPROM_ADDR(0x25,LSB)) /* 1 byte */
+#define EEPROM_SKU_CAPABILITY (GET_EEPROM_ADDR(0x25,MSB)) /* 1 byte */
+#define EEPROM_COUNTRY_CODE (GET_EEPROM_ADDR(0x26,LSB)) /* 3 bytes */
+#define EEPROM_IBSS_CHANNELS_BG (GET_EEPROM_ADDR(0x28,LSB)) /* 2 bytes */
+#define EEPROM_IBSS_CHANNELS_A (GET_EEPROM_ADDR(0x29,MSB)) /* 5 bytes */
+#define EEPROM_BSS_CHANNELS_BG (GET_EEPROM_ADDR(0x2c,LSB)) /* 2 bytes */
+#define EEPROM_HW_VERSION (GET_EEPROM_ADDR(0x72,LSB)) /* 2 bytes */
+
+/* NIC type as found in the one byte EEPROM_NIC_TYPE offset*/
+#define EEPROM_NIC_TYPE_STANDARD 0
+#define EEPROM_NIC_TYPE_DELL 1
+#define EEPROM_NIC_TYPE_FUJITSU 2
+#define EEPROM_NIC_TYPE_IBM 3
+#define EEPROM_NIC_TYPE_HP 4
+
+#define FW_MEM_REG_LOWER_BOUND 0x00300000
+#define FW_MEM_REG_EEPROM_ACCESS (FW_MEM_REG_LOWER_BOUND + 0x40)
+
+#define EEPROM_BIT_SK (1<<0)
+#define EEPROM_BIT_CS (1<<1)
+#define EEPROM_BIT_DI (1<<2)
+#define EEPROM_BIT_DO (1<<4)
+
+#define EEPROM_CMD_READ 0x2
+
+/* Interrupts masks */
+#define CX2_INTA_NONE 0x00000000
+
+#define CX2_INTA_BIT_RX_TRANSFER 0x00000002
+#define CX2_INTA_BIT_STATUS_CHANGE 0x00000010
+#define CX2_INTA_BIT_BEACON_PERIOD_EXPIRED 0x00000020
+
+//Inta Bits for CF
+#define CX2_INTA_BIT_TX_CMD_QUEUE 0x00000800
+#define CX2_INTA_BIT_TX_QUEUE_1 0x00001000
+#define CX2_INTA_BIT_TX_QUEUE_2 0x00002000
+#define CX2_INTA_BIT_TX_QUEUE_3 0x00004000
+#define CX2_INTA_BIT_TX_QUEUE_4 0x00008000
+
+#define CX2_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE 0x00010000
+
+#define CX2_INTA_BIT_PREPARE_FOR_POWER_DOWN 0x00100000
+#define CX2_INTA_BIT_POWER_DOWN 0x00200000
+
+#define CX2_INTA_BIT_FW_INITIALIZATION_DONE 0x01000000
+#define CX2_INTA_BIT_FW_CARD_DISABLE_PHY_OFF_DONE 0x02000000
+#define CX2_INTA_BIT_RF_KILL_DONE 0x04000000
+#define CX2_INTA_BIT_FATAL_ERROR 0x40000000
+#define CX2_INTA_BIT_PARITY_ERROR 0x80000000
+
+/* Interrupts enabled at init time. */
+#define CX2_INTA_MASK_ALL \
+ (CX2_INTA_BIT_TX_QUEUE_1 | \
+ CX2_INTA_BIT_TX_QUEUE_2 | \
+ CX2_INTA_BIT_TX_QUEUE_3 | \
+ CX2_INTA_BIT_TX_QUEUE_4 | \
+ CX2_INTA_BIT_TX_CMD_QUEUE | \
+ CX2_INTA_BIT_RX_TRANSFER | \
+ CX2_INTA_BIT_FATAL_ERROR | \
+ CX2_INTA_BIT_PARITY_ERROR | \
+ CX2_INTA_BIT_STATUS_CHANGE | \
+ CX2_INTA_BIT_FW_INITIALIZATION_DONE | \
+ CX2_INTA_BIT_BEACON_PERIOD_EXPIRED | \
+ CX2_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE | \
+ CX2_INTA_BIT_PREPARE_FOR_POWER_DOWN | \
+ CX2_INTA_BIT_POWER_DOWN | \
+ CX2_INTA_BIT_RF_KILL_DONE )
+
+#define IPWSTATUS_ERROR_LOG (CX2_SHARED_LOWER_BOUND + 0x410)
+#define IPW_EVENT_LOG (CX2_SHARED_LOWER_BOUND + 0x414)
+
+/* FW event log definitions */
+#define EVENT_ELEM_SIZE (3 * sizeof(u32))
+#define EVENT_START_OFFSET (1 * sizeof(u32) + 2 * sizeof(u16))
+
+/* FW error log definitions */
+#define ERROR_ELEM_SIZE (7 * sizeof(u32))
+#define ERROR_START_OFFSET (1 * sizeof(u32))
+
+enum {
+ IPW_FW_ERROR_OK = 0,
+ IPW_FW_ERROR_FAIL,
+ IPW_FW_ERROR_MEMORY_UNDERFLOW,
+ IPW_FW_ERROR_MEMORY_OVERFLOW,
+ IPW_FW_ERROR_BAD_PARAM,
+ IPW_FW_ERROR_BAD_CHECKSUM,
+ IPW_FW_ERROR_NMI_INTERRUPT,
+ IPW_FW_ERROR_BAD_DATABASE,
+ IPW_FW_ERROR_ALLOC_FAIL,
+ IPW_FW_ERROR_DMA_UNDERRUN,
+ IPW_FW_ERROR_DMA_STATUS,
+ IPW_FW_ERROR_DINOSTATUS_ERROR,
+ IPW_FW_ERROR_EEPROMSTATUS_ERROR,
+ IPW_FW_ERROR_SYSASSERT,
+ IPW_FW_ERROR_FATAL_ERROR
+};
+
+#define AUTH_OPEN 0
+#define AUTH_SHARED_KEY 1
+#define AUTH_IGNORE 3
+
+#define HC_ASSOCIATE 0
+#define HC_REASSOCIATE 1
+#define HC_DISASSOCIATE 2
+#define HC_IBSS_START 3
+#define HC_IBSS_RECONF 4
+#define HC_DISASSOC_QUIET 5
+
+#define IPW_RATE_CAPABILITIES 1
+#define IPW_RATE_CONNECT 0
+
+
+/*
+ * Rate values and masks
+ */
+#define IPW_TX_RATE_1MB 0x0A
+#define IPW_TX_RATE_2MB 0x14
+#define IPW_TX_RATE_5MB 0x37
+#define IPW_TX_RATE_6MB 0x0D
+#define IPW_TX_RATE_9MB 0x0F
+#define IPW_TX_RATE_11MB 0x6E
+#define IPW_TX_RATE_12MB 0x05
+#define IPW_TX_RATE_18MB 0x07
+#define IPW_TX_RATE_24MB 0x09
+#define IPW_TX_RATE_36MB 0x0B
+#define IPW_TX_RATE_48MB 0x01
+#define IPW_TX_RATE_54MB 0x03
+
+#define IPW_ORD_TABLE_ID_MASK 0x0000FF00
+#define IPW_ORD_TABLE_VALUE_MASK 0x000000FF
+
+#define IPW_ORD_TABLE_0_MASK 0x0000F000
+#define IPW_ORD_TABLE_1_MASK 0x0000F100
+#define IPW_ORD_TABLE_2_MASK 0x0000F200
+#define IPW_ORD_TABLE_3_MASK 0x0000F300
+#define IPW_ORD_TABLE_4_MASK 0x0000F400
+#define IPW_ORD_TABLE_5_MASK 0x0000F500
+#define IPW_ORD_TABLE_6_MASK 0x0000F600
+#define IPW_ORD_TABLE_7_MASK 0x0000F700
+
+/*
+ * Table 0 Entries (all entries are 32 bits)
+ */
+enum {
+ IPW_ORD_STAT_TX_CURR_RATE = IPW_ORD_TABLE_0_MASK + 1,
+ IPW_ORD_STAT_FRAG_TRESHOLD,
+ IPW_ORD_STAT_RTS_THRESHOLD,
+ IPW_ORD_STAT_TX_HOST_REQUESTS,
+ IPW_ORD_STAT_TX_HOST_COMPLETE,
+ IPW_ORD_STAT_TX_DIR_DATA,
+ IPW_ORD_STAT_TX_DIR_DATA_B_1,
+ IPW_ORD_STAT_TX_DIR_DATA_B_2,
+ IPW_ORD_STAT_TX_DIR_DATA_B_5_5,
+ IPW_ORD_STAT_TX_DIR_DATA_B_11,
+ /* Hole */
+
+
+
+
+
+
+
+ IPW_ORD_STAT_TX_DIR_DATA_G_1 = IPW_ORD_TABLE_0_MASK + 19,
+ IPW_ORD_STAT_TX_DIR_DATA_G_2,
+ IPW_ORD_STAT_TX_DIR_DATA_G_5_5,
+ IPW_ORD_STAT_TX_DIR_DATA_G_6,
+ IPW_ORD_STAT_TX_DIR_DATA_G_9,
+ IPW_ORD_STAT_TX_DIR_DATA_G_11,
+ IPW_ORD_STAT_TX_DIR_DATA_G_12,
+ IPW_ORD_STAT_TX_DIR_DATA_G_18,
+ IPW_ORD_STAT_TX_DIR_DATA_G_24,
+ IPW_ORD_STAT_TX_DIR_DATA_G_36,
+ IPW_ORD_STAT_TX_DIR_DATA_G_48,
+ IPW_ORD_STAT_TX_DIR_DATA_G_54,
+ IPW_ORD_STAT_TX_NON_DIR_DATA,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_B_1,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_B_2,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_B_5_5,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_B_11,
+ /* Hole */
+
+
+
+
+
+
+
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_1 = IPW_ORD_TABLE_0_MASK + 44,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_2,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_5_5,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_6,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_9,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_11,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_12,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_18,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_24,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_36,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_48,
+ IPW_ORD_STAT_TX_NON_DIR_DATA_G_54,
+ IPW_ORD_STAT_TX_RETRY,
+ IPW_ORD_STAT_TX_FAILURE,
+ IPW_ORD_STAT_RX_ERR_CRC,
+ IPW_ORD_STAT_RX_ERR_ICV,
+ IPW_ORD_STAT_RX_NO_BUFFER,
+ IPW_ORD_STAT_FULL_SCANS,
+ IPW_ORD_STAT_PARTIAL_SCANS,
+ IPW_ORD_STAT_TGH_ABORTED_SCANS,
+ IPW_ORD_STAT_TX_TOTAL_BYTES,
+ IPW_ORD_STAT_CURR_RSSI_RAW,
+ IPW_ORD_STAT_RX_BEACON,
+ IPW_ORD_STAT_MISSED_BEACONS,
+ IPW_ORD_TABLE_0_LAST
+};
+
+#define IPW_RSSI_TO_DBM 112
+
+/* Table 1 Entries
+ */
+enum {
+ IPW_ORD_TABLE_1_LAST = IPW_ORD_TABLE_1_MASK | 1,
+};
+
+/*
+ * Table 2 Entries
+ *
+ * FW_VERSION: 16 byte string
+ * FW_DATE: 16 byte string (only 14 bytes used)
+ * UCODE_VERSION: 4 byte version code
+ * UCODE_DATE: 5 bytes code code
+ * ADDAPTER_MAC: 6 byte MAC address
+ * RTC: 4 byte clock
+ */
+enum {
+ IPW_ORD_STAT_FW_VERSION = IPW_ORD_TABLE_2_MASK | 1,
+ IPW_ORD_STAT_FW_DATE,
+ IPW_ORD_STAT_UCODE_VERSION,
+ IPW_ORD_STAT_UCODE_DATE,
+ IPW_ORD_STAT_ADAPTER_MAC,
+ IPW_ORD_STAT_RTC,
+ IPW_ORD_TABLE_2_LAST
+};
+
+/* Table 3 */
+enum {
+ IPW_ORD_STAT_TX_PACKET = IPW_ORD_TABLE_3_MASK | 0,
+ IPW_ORD_STAT_TX_PACKET_FAILURE,
+ IPW_ORD_STAT_TX_PACKET_SUCCESS,
+ IPW_ORD_STAT_TX_PACKET_ABORTED,
+ IPW_ORD_TABLE_3_LAST
+};
+
+/* Table 4 */
+enum {
+ IPW_ORD_TABLE_4_LAST = IPW_ORD_TABLE_4_MASK
+};
+
+/* Table 5 */
+enum {
+ IPW_ORD_STAT_AVAILABLE_AP_COUNT = IPW_ORD_TABLE_5_MASK,
+ IPW_ORD_STAT_AP_ASSNS,
+ IPW_ORD_STAT_ROAM,
+ IPW_ORD_STAT_ROAM_CAUSE_MISSED_BEACONS,
+ IPW_ORD_STAT_ROAM_CAUSE_UNASSOC,
+ IPW_ORD_STAT_ROAM_CAUSE_RSSI,
+ IPW_ORD_STAT_ROAM_CAUSE_LINK_QUALITY,
+ IPW_ORD_STAT_ROAM_CAUSE_AP_LOAD_BALANCE,
+ IPW_ORD_STAT_ROAM_CAUSE_AP_NO_TX,
+ IPW_ORD_STAT_LINK_UP,
+ IPW_ORD_STAT_LINK_DOWN,
+ IPW_ORD_ANTENNA_DIVERSITY,
+ IPW_ORD_CURR_FREQ,
+ IPW_ORD_TABLE_5_LAST
+};
+
+/* Table 6 */
+enum {
+ IPW_ORD_COUNTRY_CODE = IPW_ORD_TABLE_6_MASK,
+ IPW_ORD_CURR_BSSID,
+ IPW_ORD_CURR_SSID,
+ IPW_ORD_TABLE_6_LAST
+};
+
+/* Table 7 */
+enum {
+ IPW_ORD_STAT_PERCENT_MISSED_BEACONS = IPW_ORD_TABLE_7_MASK,
+ IPW_ORD_STAT_PERCENT_TX_RETRIES,
+ IPW_ORD_STAT_PERCENT_LINK_QUALITY,
+ IPW_ORD_STAT_CURR_RSSI_DBM,
+ IPW_ORD_TABLE_7_LAST
+};
+
+#define IPW_ORDINALS_TABLE_LOWER (CX2_SHARED_LOWER_BOUND + 0x500)
+#define IPW_ORDINALS_TABLE_0 (CX2_SHARED_LOWER_BOUND + 0x180)
+#define IPW_ORDINALS_TABLE_1 (CX2_SHARED_LOWER_BOUND + 0x184)
+#define IPW_ORDINALS_TABLE_2 (CX2_SHARED_LOWER_BOUND + 0x188)
+#define IPW_MEM_FIXED_OVERRIDE (CX2_SHARED_LOWER_BOUND + 0x41C)
+
+struct ipw_fixed_rate {
+ u16 tx_rates;
+ u16 reserved;
+} __attribute__ ((packed));
+
+#define CX2_INDIRECT_ADDR_MASK (~0x3ul)
+
+struct host_cmd {
+ u8 cmd;
+ u8 len;
+ u16 reserved;
+ u32 param[TFD_CMD_IMMEDIATE_PAYLOAD_LENGTH];
+} __attribute__ ((packed));
+
+#define CFG_BT_COEXISTENCE_MIN 0x00
+#define CFG_BT_COEXISTENCE_DEFER 0x02
+#define CFG_BT_COEXISTENCE_KILL 0x04
+#define CFG_BT_COEXISTENCE_WME_OVER_BT 0x08
+#define CFG_BT_COEXISTENCE_OOB 0x10
+#define CFG_BT_COEXISTENCE_MAX 0xFF
+#define CFG_BT_COEXISTENCE_DEF 0x80 /* read Bt from EEPROM*/
+
+#define CFG_CTS_TO_ITSELF_ENABLED_MIN 0x0
+#define CFG_CTS_TO_ITSELF_ENABLED_MAX 0x1
+#define CFG_CTS_TO_ITSELF_ENABLED_DEF CFG_CTS_TO_ITSELF_ENABLED_MIN
+
+#define CFG_SYS_ANTENNA_BOTH 0x000
+#define CFG_SYS_ANTENNA_A 0x001
+#define CFG_SYS_ANTENNA_B 0x003
+
+/*
+ * The definitions below were lifted off the ipw2100 driver, which only
+ * supports 'b' mode, so I'm sure these are not exactly correct.
+ *
+ * Somebody fix these!!
+ */
+#define REG_MIN_CHANNEL 0
+#define REG_MAX_CHANNEL 14
+
+#define REG_CHANNEL_MASK 0x00003FFF
+#define IPW_IBSS_11B_DEFAULT_MASK 0x87ff
+
+static const long ipw_frequencies[] = {
+ 2412, 2417, 2422, 2427,
+ 2432, 2437, 2442, 2447,
+ 2452, 2457, 2462, 2467,
+ 2472, 2484
+};
+
+#define FREQ_COUNT ARRAY_SIZE(ipw_frequencies)
+
+#define IPW_MAX_CONFIG_RETRIES 10
+
+static inline u32 frame_hdr_len(struct ieee80211_hdr *hdr)
+{
+ u32 retval;
+ u16 fc;
+
+ retval = sizeof(struct ieee80211_hdr);
+ fc = le16_to_cpu(hdr->frame_ctl);
+
+ /*
+ * Function ToDS FromDS
+ * IBSS 0 0
+ * To AP 1 0
+ * From AP 0 1
+ * WDS (bridge) 1 1
+ *
+ * Only WDS frames use Address4 among them. --YZ
+ */
+ if (!(fc & IEEE80211_FCTL_TODS) || !(fc & IEEE80211_FCTL_FROMDS))
+ retval -= ETH_ALEN;
+
+ return retval;
+}
+
+#endif /* __ipw2200_h__ */
#include <net/iw_handler.h>
#include <net/ieee80211.h>
+#include <net/ieee80211.h>
+
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>
#include "hermes.h"
#include "hermes_rid.h"
#include "orinoco.h"
-#include "ieee802_11.h"
/********************************************************************/
/* Module information */
#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
#define ORINOCO_MIN_MTU 256
-#define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD)
+#define ORINOCO_MAX_MTU (IEEE80211_DATA_LEN - ENCAPS_OVERHEAD)
#define SYMBOL_MAX_VER_LEN (14)
#define USER_BAP 0
if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
return -EINVAL;
- if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) >
+ if ( (new_mtu + ENCAPS_OVERHEAD + IEEE80211_HLEN) >
(priv->nicbuf_size - ETH_HLEN) )
return -EINVAL;
data. */
return;
}
- if (length > IEEE802_11_DATA_LEN) {
+ if (length > IEEE80211_DATA_LEN) {
printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
dev->name, length);
stats->rx_length_errors++;
/* No need to lock, the hw_unavailable flag is already set in
* alloc_orinocodev() */
- priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN;
+ priv->nicbuf_size = IEEE80211_FRAME_LEN + ETH_HLEN;
/* Initialize the firmware */
err = orinoco_reinit_firmware(dev);
#define __WL3501_H__
#include <linux/spinlock.h>
-#include "ieee802_11.h"
+#include <net/ieee80211.h>
/* define for WLA 2.0 */
#define WL3501_BLKSZ 256
struct wl3501_80211_tx_hdr {
struct wl3501_80211_tx_plcp_hdr pclp_hdr;
- struct ieee802_11_hdr mac_hdr;
+ struct ieee80211_hdr mac_hdr;
} __attribute__ ((packed));
/*
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
-
-CFLAGS_zd1201.o = -Idrivers/net/wireless/
#include <linux/string.h>
#include <linux/if_arp.h>
#include <linux/firmware.h>
-#include <ieee802_11.h>
+#include <net/ieee80211.h>
#include "zd1201.h"
static struct usb_device_id zd1201_table[] = {
goto resubmit;
}
- if ((seq & IEEE802_11_SCTL_FRAG) ||
- (fc & IEEE802_11_FCTL_MOREFRAGS)) {
+ if ((seq & IEEE80211_SCTL_FRAG) ||
+ (fc & IEEE80211_FCTL_MOREFRAGS)) {
struct zd1201_frag *frag = NULL;
char *ptr;
if (datalen<14)
goto resubmit;
- if ((seq & IEEE802_11_SCTL_FRAG) == 0) {
+ if ((seq & IEEE80211_SCTL_FRAG) == 0) {
frag = kmalloc(sizeof(struct zd1201_frag*),
GFP_ATOMIC);
if (!frag)
goto resubmit;
- skb = dev_alloc_skb(IEEE802_11_DATA_LEN +14+2);
+ skb = dev_alloc_skb(IEEE80211_DATA_LEN +14+2);
if (!skb) {
kfree(frag);
goto resubmit;
}
frag->skb = skb;
- frag->seq = seq & IEEE802_11_SCTL_SEQ;
+ frag->seq = seq & IEEE80211_SCTL_SEQ;
skb_reserve(skb, 2);
memcpy(skb_put(skb, 12), &data[datalen-14], 12);
memcpy(skb_put(skb, 2), &data[6], 2);
goto resubmit;
}
hlist_for_each_entry(frag, node, &zd->fraglist, fnode)
- if(frag->seq == (seq&IEEE802_11_SCTL_SEQ))
+ if(frag->seq == (seq&IEEE80211_SCTL_SEQ))
break;
if (!frag)
goto resubmit;
ptr = skb_put(skb, len);
if (ptr)
memcpy(ptr, data+8, len);
- if (fc & IEEE802_11_FCTL_MOREFRAGS)
+ if (fc & IEEE80211_FCTL_MOREFRAGS)
goto resubmit;
hlist_del_init(&frag->fnode);
kfree(frag);
*/
#ifndef IEEE80211_H
#define IEEE80211_H
-
#include <linux/if_ether.h> /* ETH_ALEN */
#include <linux/kernel.h> /* ARRAY_SIZE */
u16 length;
} __attribute__ ((packed));
+#define IEEE80211_1ADDR_LEN 10
+#define IEEE80211_2ADDR_LEN 16
#define IEEE80211_3ADDR_LEN 24
#define IEEE80211_4ADDR_LEN 30
#define IEEE80211_FCS_LEN 4
#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
-/* Information Element IDs */
-#define WLAN_EID_SSID 0
-#define WLAN_EID_SUPP_RATES 1
-#define WLAN_EID_FH_PARAMS 2
-#define WLAN_EID_DS_PARAMS 3
-#define WLAN_EID_CF_PARAMS 4
-#define WLAN_EID_TIM 5
-#define WLAN_EID_IBSS_PARAMS 6
-#define WLAN_EID_CHALLENGE 16
-#define WLAN_EID_RSN 48
-#define WLAN_EID_GENERIC 221
-
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-
#define IEEE80211_STATMASK_SIGNAL (1<<0)
#define IEEE80211_STATMASK_RSSI (1<<1)
#define IEEE80211_STATMASK_NOISE (1<<2)
struct ieee80211_device;
+#include "ieee80211_crypt.h"
+
#define SEC_KEY_1 (1<<0)
#define SEC_KEY_2 (1<<1)
#define SEC_KEY_3 (1<<2)
*/
-struct ieee80211_header_data {
- u16 frame_ctl;
- u16 duration_id;
- u8 addr1[6];
- u8 addr2[6];
- u8 addr3[6];
- u16 seq_ctrl;
-};
-
#define BEACON_PROBE_SSID_ID_POSITION 12
/* Management Frame Information Element Types */
*/
struct ieee80211_authentication {
- struct ieee80211_header_data header;
+ struct ieee80211_hdr_3addr header;
u16 algorithm;
u16 transaction;
u16 status;
struct ieee80211_probe_response {
- struct ieee80211_header_data header;
+ struct ieee80211_hdr_3addr header;
u32 time_stamp[2];
u16 beacon_interval;
u16 capability;
#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+extern inline int is_multicast_ether_addr(const u8 *addr)
+{
+ return ((addr[0] != 0xff) && (0x01 & addr[0]));
+}
+
extern inline int is_broadcast_ether_addr(const u8 *addr)
{
return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \
extern inline int ieee80211_get_hdrlen(u16 fc)
{
- int hdrlen = 24;
+ int hdrlen = IEEE80211_3ADDR_LEN;
switch (WLAN_FC_GET_TYPE(fc)) {
case IEEE80211_FTYPE_DATA:
if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
- hdrlen = 30; /* Addr4 */
+ hdrlen = IEEE80211_4ADDR_LEN;
break;
case IEEE80211_FTYPE_CTL:
switch (WLAN_FC_GET_STYPE(fc)) {
case IEEE80211_STYPE_CTS:
case IEEE80211_STYPE_ACK:
- hdrlen = 10;
+ hdrlen = IEEE80211_1ADDR_LEN;
break;
default:
- hdrlen = 16;
+ hdrlen = IEEE80211_2ADDR_LEN;
break;
}
break;
*d = '\0';
return escaped;
}
-
#endif /* IEEE80211_H */
--- /dev/null
+/*
+ * Original code based on Host AP (software wireless LAN access point) driver
+ * for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ *
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+/*
+ * This file defines the interface to the ieee80211 crypto module.
+ */
+#ifndef IEEE80211_CRYPT_H
+#define IEEE80211_CRYPT_H
+
+#include <linux/skbuff.h>
+
+struct ieee80211_crypto_ops {
+ const char *name;
+
+ /* init new crypto context (e.g., allocate private data space,
+ * select IV, etc.); returns NULL on failure or pointer to allocated
+ * private data on success */
+ void * (*init)(int keyidx);
+
+ /* deinitialize crypto context and free allocated private data */
+ void (*deinit)(void *priv);
+
+ /* encrypt/decrypt return < 0 on error or >= 0 on success. The return
+ * value from decrypt_mpdu is passed as the keyidx value for
+ * decrypt_msdu. skb must have enough head and tail room for the
+ * encryption; if not, error will be returned; these functions are
+ * called for all MPDUs (i.e., fragments).
+ */
+ int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
+ int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
+
+ /* These functions are called for full MSDUs, i.e. full frames.
+ * These can be NULL if full MSDU operations are not needed. */
+ int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
+ int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
+ void *priv);
+
+ int (*set_key)(void *key, int len, u8 *seq, void *priv);
+ int (*get_key)(void *key, int len, u8 *seq, void *priv);
+
+ /* procfs handler for printing out key information and possible
+ * statistics */
+ char * (*print_stats)(char *p, void *priv);
+
+ /* maximum number of bytes added by encryption; encrypt buf is
+ * allocated with extra_prefix_len bytes, copy of in_buf, and
+ * extra_postfix_len; encrypt need not use all this space, but
+ * the result must start at the beginning of the buffer and correct
+ * length must be returned */
+ int extra_prefix_len, extra_postfix_len;
+
+ struct module *owner;
+};
+
+struct ieee80211_crypt_data {
+ struct list_head list; /* delayed deletion list */
+ struct ieee80211_crypto_ops *ops;
+ void *priv;
+ atomic_t refcnt;
+};
+
+int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops);
+int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops);
+struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name);
+void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
+void ieee80211_crypt_deinit_handler(unsigned long);
+void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
+ struct ieee80211_crypt_data **crypt);
+
+#endif
source "net/bluetooth/Kconfig"
+source "net/ieee80211/Kconfig"
+
source "drivers/net/Kconfig"
endmenu
obj-$(CONFIG_ECONET) += econet/
obj-$(CONFIG_VLAN_8021Q) += 8021q/
obj-$(CONFIG_IP_SCTP) += sctp/
+obj-$(CONFIG_IEEE80211) += ieee80211/
ifeq ($(CONFIG_NET),y)
obj-$(CONFIG_SYSCTL) += sysctl_net.o
--- /dev/null
+config IEEE80211
+ tristate "Generic IEEE 802.11 Networking Stack"
+ select NET_RADIO
+ ---help---
+ This option enables the hardware independent IEEE 802.11
+ networking stack.
+
+config IEEE80211_DEBUG
+ bool "Enable full debugging output"
+ depends on IEEE80211
+ ---help---
+ This option will enable debug tracing output for the
+ ieee80211 network stack.
+
+ This will result in the kernel module being ~70k larger. You
+ can control which debug output is sent to the kernel log by
+ setting the value in
+
+ /proc/net/ieee80211/debug_level
+
+ For example:
+
+ % echo 0x00000FFO > /proc/net/ieee80211/debug_level
+
+ For a list of values you can assign to debug_level, you
+ can look at the bit mask values in <net/ieee80211.h>
+
+ If you are not trying to debug or develop the ieee80211
+ subsystem, you most likely want to say N here.
+
+config IEEE80211_CRYPT_WEP
+ tristate "IEEE 802.11 WEP encryption (802.1x)"
+ depends on IEEE80211
+ select CRYPTO
+ select CRYPTO_ARC4
+ select CRC32
+ ---help---
+ Include software based cipher suites in support of IEEE
+ 802.11's WEP. This is needed for WEP as well as 802.1x.
+
+ This can be compiled as a modules and it will be called
+ "ieee80211_crypt_wep".
+
+config IEEE80211_CRYPT_CCMP
+ tristate "IEEE 802.11i CCMP support"
+ depends on IEEE80211
+ select CRYPTO
+ select CRYPTO_AES
+ ---help---
+ Include software based cipher suites in support of IEEE 802.11i
+ (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
+ networks.
+
+ This can be compiled as a modules and it will be called
+ "ieee80211_crypt_ccmp".
+
+config IEEE80211_CRYPT_TKIP
+ tristate "IEEE 802.11i TKIP encryption"
+ depends on IEEE80211
+ select CRYPTO
+ select CRYPTO_MICHAEL_MIC
+ ---help---
+ Include software based cipher suites in support of IEEE 802.11i
+ (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with TKIP enabled
+ networks.
+
+ This can be compiled as a modules and it will be called
+ "ieee80211_crypt_tkip".
+
--- /dev/null
+obj-$(CONFIG_IEEE80211) += ieee80211.o
+obj-$(CONFIG_IEEE80211) += ieee80211_crypt.o
+obj-$(CONFIG_IEEE80211_CRYPT_WEP) += ieee80211_crypt_wep.o
+obj-$(CONFIG_IEEE80211_CRYPT_CCMP) += ieee80211_crypt_ccmp.o
+obj-$(CONFIG_IEEE80211_CRYPT_TKIP) += ieee80211_crypt_tkip.o
+ieee80211-objs := \
+ ieee80211_module.o \
+ ieee80211_tx.o \
+ ieee80211_rx.o \
+ ieee80211_wx.o
+
--- /dev/null
+/*
+ * Host AP crypto routines
+ *
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Portions Copyright (C) 2004, Intel Corporation <jketreno@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/string.h>
+#include <asm/errno.h>
+
+#include <net/ieee80211.h>
+
+MODULE_AUTHOR("Jouni Malinen");
+MODULE_DESCRIPTION("HostAP crypto");
+MODULE_LICENSE("GPL");
+
+struct ieee80211_crypto_alg {
+ struct list_head list;
+ struct ieee80211_crypto_ops *ops;
+};
+
+
+struct ieee80211_crypto {
+ struct list_head algs;
+ spinlock_t lock;
+};
+
+static struct ieee80211_crypto *hcrypt;
+
+void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee,
+ int force)
+{
+ struct list_head *ptr, *n;
+ struct ieee80211_crypt_data *entry;
+
+ for (ptr = ieee->crypt_deinit_list.next, n = ptr->next;
+ ptr != &ieee->crypt_deinit_list; ptr = n, n = ptr->next) {
+ entry = list_entry(ptr, struct ieee80211_crypt_data, list);
+
+ if (atomic_read(&entry->refcnt) != 0 && !force)
+ continue;
+
+ list_del(ptr);
+
+ if (entry->ops) {
+ entry->ops->deinit(entry->priv);
+ module_put(entry->ops->owner);
+ }
+ kfree(entry);
+ }
+}
+
+void ieee80211_crypt_deinit_handler(unsigned long data)
+{
+ struct ieee80211_device *ieee = (struct ieee80211_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ieee->lock, flags);
+ ieee80211_crypt_deinit_entries(ieee, 0);
+ if (!list_empty(&ieee->crypt_deinit_list)) {
+ printk(KERN_DEBUG "%s: entries remaining in delayed crypt "
+ "deletion list\n", ieee->dev->name);
+ ieee->crypt_deinit_timer.expires = jiffies + HZ;
+ add_timer(&ieee->crypt_deinit_timer);
+ }
+ spin_unlock_irqrestore(&ieee->lock, flags);
+
+}
+
+void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
+ struct ieee80211_crypt_data **crypt)
+{
+ struct ieee80211_crypt_data *tmp;
+ unsigned long flags;
+
+ if (*crypt == NULL)
+ return;
+
+ tmp = *crypt;
+ *crypt = NULL;
+
+ /* must not run ops->deinit() while there may be pending encrypt or
+ * decrypt operations. Use a list of delayed deinits to avoid needing
+ * locking. */
+
+ spin_lock_irqsave(&ieee->lock, flags);
+ list_add(&tmp->list, &ieee->crypt_deinit_list);
+ if (!timer_pending(&ieee->crypt_deinit_timer)) {
+ ieee->crypt_deinit_timer.expires = jiffies + HZ;
+ add_timer(&ieee->crypt_deinit_timer);
+ }
+ spin_unlock_irqrestore(&ieee->lock, flags);
+}
+
+int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops)
+{
+ unsigned long flags;
+ struct ieee80211_crypto_alg *alg;
+
+ if (hcrypt == NULL)
+ return -1;
+
+ alg = kmalloc(sizeof(*alg), GFP_KERNEL);
+ if (alg == NULL)
+ return -ENOMEM;
+
+ memset(alg, 0, sizeof(*alg));
+ alg->ops = ops;
+
+ spin_lock_irqsave(&hcrypt->lock, flags);
+ list_add(&alg->list, &hcrypt->algs);
+ spin_unlock_irqrestore(&hcrypt->lock, flags);
+
+ printk(KERN_DEBUG "ieee80211_crypt: registered algorithm '%s'\n",
+ ops->name);
+
+ return 0;
+}
+
+int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops)
+{
+ unsigned long flags;
+ struct list_head *ptr;
+ struct ieee80211_crypto_alg *del_alg = NULL;
+
+ if (hcrypt == NULL)
+ return -1;
+
+ spin_lock_irqsave(&hcrypt->lock, flags);
+ for (ptr = hcrypt->algs.next; ptr != &hcrypt->algs; ptr = ptr->next) {
+ struct ieee80211_crypto_alg *alg =
+ (struct ieee80211_crypto_alg *) ptr;
+ if (alg->ops == ops) {
+ list_del(&alg->list);
+ del_alg = alg;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&hcrypt->lock, flags);
+
+ if (del_alg) {
+ printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
+ "'%s'\n", ops->name);
+ kfree(del_alg);
+ }
+
+ return del_alg ? 0 : -1;
+}
+
+
+struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name)
+{
+ unsigned long flags;
+ struct list_head *ptr;
+ struct ieee80211_crypto_alg *found_alg = NULL;
+
+ if (hcrypt == NULL)
+ return NULL;
+
+ spin_lock_irqsave(&hcrypt->lock, flags);
+ for (ptr = hcrypt->algs.next; ptr != &hcrypt->algs; ptr = ptr->next) {
+ struct ieee80211_crypto_alg *alg =
+ (struct ieee80211_crypto_alg *) ptr;
+ if (strcmp(alg->ops->name, name) == 0) {
+ found_alg = alg;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&hcrypt->lock, flags);
+
+ if (found_alg)
+ return found_alg->ops;
+ else
+ return NULL;
+}
+
+
+static void * ieee80211_crypt_null_init(int keyidx) { return (void *) 1; }
+static void ieee80211_crypt_null_deinit(void *priv) {}
+
+static struct ieee80211_crypto_ops ieee80211_crypt_null = {
+ .name = "NULL",
+ .init = ieee80211_crypt_null_init,
+ .deinit = ieee80211_crypt_null_deinit,
+ .encrypt_mpdu = NULL,
+ .decrypt_mpdu = NULL,
+ .encrypt_msdu = NULL,
+ .decrypt_msdu = NULL,
+ .set_key = NULL,
+ .get_key = NULL,
+ .extra_prefix_len = 0,
+ .extra_postfix_len = 0,
+ .owner = THIS_MODULE,
+};
+
+
+static int __init ieee80211_crypto_init(void)
+{
+ int ret = -ENOMEM;
+
+ hcrypt = kmalloc(sizeof(*hcrypt), GFP_KERNEL);
+ if (!hcrypt)
+ goto out;
+
+ memset(hcrypt, 0, sizeof(*hcrypt));
+ INIT_LIST_HEAD(&hcrypt->algs);
+ spin_lock_init(&hcrypt->lock);
+
+ ret = ieee80211_register_crypto_ops(&ieee80211_crypt_null);
+ if (ret < 0) {
+ kfree(hcrypt);
+ hcrypt = NULL;
+ }
+out:
+ return ret;
+}
+
+
+static void __exit ieee80211_crypto_deinit(void)
+{
+ struct list_head *ptr, *n;
+
+ if (hcrypt == NULL)
+ return;
+
+ for (ptr = hcrypt->algs.next, n = ptr->next; ptr != &hcrypt->algs;
+ ptr = n, n = ptr->next) {
+ struct ieee80211_crypto_alg *alg =
+ (struct ieee80211_crypto_alg *) ptr;
+ list_del(ptr);
+ printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
+ "'%s' (deinit)\n", alg->ops->name);
+ kfree(alg);
+ }
+
+ kfree(hcrypt);
+}
+
+EXPORT_SYMBOL(ieee80211_crypt_deinit_entries);
+EXPORT_SYMBOL(ieee80211_crypt_deinit_handler);
+EXPORT_SYMBOL(ieee80211_crypt_delayed_deinit);
+
+EXPORT_SYMBOL(ieee80211_register_crypto_ops);
+EXPORT_SYMBOL(ieee80211_unregister_crypto_ops);
+EXPORT_SYMBOL(ieee80211_get_crypto_ops);
+
+module_init(ieee80211_crypto_init);
+module_exit(ieee80211_crypto_deinit);
--- /dev/null
+/*
+ * Host AP crypt: host-based CCMP encryption implementation for Host AP driver
+ *
+ * Copyright (c) 2003-2004, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <asm/string.h>
+#include <linux/wireless.h>
+
+#include <net/ieee80211.h>
+
+
+#include <linux/crypto.h>
+#include <asm/scatterlist.h>
+
+MODULE_AUTHOR("Jouni Malinen");
+MODULE_DESCRIPTION("Host AP crypt: CCMP");
+MODULE_LICENSE("GPL");
+
+#define AES_BLOCK_LEN 16
+#define CCMP_HDR_LEN 8
+#define CCMP_MIC_LEN 8
+#define CCMP_TK_LEN 16
+#define CCMP_PN_LEN 6
+
+struct ieee80211_ccmp_data {
+ u8 key[CCMP_TK_LEN];
+ int key_set;
+
+ u8 tx_pn[CCMP_PN_LEN];
+ u8 rx_pn[CCMP_PN_LEN];
+
+ u32 dot11RSNAStatsCCMPFormatErrors;
+ u32 dot11RSNAStatsCCMPReplays;
+ u32 dot11RSNAStatsCCMPDecryptErrors;
+
+ int key_idx;
+
+ struct crypto_tfm *tfm;
+
+ /* scratch buffers for virt_to_page() (crypto API) */
+ u8 tx_b0[AES_BLOCK_LEN], tx_b[AES_BLOCK_LEN],
+ tx_e[AES_BLOCK_LEN], tx_s0[AES_BLOCK_LEN];
+ u8 rx_b0[AES_BLOCK_LEN], rx_b[AES_BLOCK_LEN], rx_a[AES_BLOCK_LEN];
+};
+
+static void ieee80211_ccmp_aes_encrypt(struct crypto_tfm *tfm,
+ const u8 pt[16], u8 ct[16])
+{
+ struct scatterlist src, dst;
+
+ src.page = virt_to_page(pt);
+ src.offset = offset_in_page(pt);
+ src.length = AES_BLOCK_LEN;
+
+ dst.page = virt_to_page(ct);
+ dst.offset = offset_in_page(ct);
+ dst.length = AES_BLOCK_LEN;
+
+ crypto_cipher_encrypt(tfm, &dst, &src, AES_BLOCK_LEN);
+}
+
+static void * ieee80211_ccmp_init(int key_idx)
+{
+ struct ieee80211_ccmp_data *priv;
+
+ priv = kmalloc(sizeof(*priv), GFP_ATOMIC);
+ if (priv == NULL)
+ goto fail;
+ memset(priv, 0, sizeof(*priv));
+ priv->key_idx = key_idx;
+
+ priv->tfm = crypto_alloc_tfm("aes", 0);
+ if (priv->tfm == NULL) {
+ printk(KERN_DEBUG "ieee80211_crypt_ccmp: could not allocate "
+ "crypto API aes\n");
+ goto fail;
+ }
+
+ return priv;
+
+fail:
+ if (priv) {
+ if (priv->tfm)
+ crypto_free_tfm(priv->tfm);
+ kfree(priv);
+ }
+
+ return NULL;
+}
+
+
+static void ieee80211_ccmp_deinit(void *priv)
+{
+ struct ieee80211_ccmp_data *_priv = priv;
+ if (_priv && _priv->tfm)
+ crypto_free_tfm(_priv->tfm);
+ kfree(priv);
+}
+
+
+static inline void xor_block(u8 *b, u8 *a, size_t len)
+{
+ int i;
+ for (i = 0; i < len; i++)
+ b[i] ^= a[i];
+}
+
+
+static void ccmp_init_blocks(struct crypto_tfm *tfm,
+ struct ieee80211_hdr *hdr,
+ u8 *pn, size_t dlen, u8 *b0, u8 *auth,
+ u8 *s0)
+{
+ u8 *pos, qc = 0;
+ size_t aad_len;
+ u16 fc;
+ int a4_included, qc_included;
+ u8 aad[2 * AES_BLOCK_LEN];
+
+ fc = le16_to_cpu(hdr->frame_ctl);
+ a4_included = ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+ (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS));
+ qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
+ (WLAN_FC_GET_STYPE(fc) & 0x08));
+ aad_len = 22;
+ if (a4_included)
+ aad_len += 6;
+ if (qc_included) {
+ pos = (u8 *) &hdr->addr4;
+ if (a4_included)
+ pos += 6;
+ qc = *pos & 0x0f;
+ aad_len += 2;
+ }
+
+ /* CCM Initial Block:
+ * Flag (Include authentication header, M=3 (8-octet MIC),
+ * L=1 (2-octet Dlen))
+ * Nonce: 0x00 | A2 | PN
+ * Dlen */
+ b0[0] = 0x59;
+ b0[1] = qc;
+ memcpy(b0 + 2, hdr->addr2, ETH_ALEN);
+ memcpy(b0 + 8, pn, CCMP_PN_LEN);
+ b0[14] = (dlen >> 8) & 0xff;
+ b0[15] = dlen & 0xff;
+
+ /* AAD:
+ * FC with bits 4..6 and 11..13 masked to zero; 14 is always one
+ * A1 | A2 | A3
+ * SC with bits 4..15 (seq#) masked to zero
+ * A4 (if present)
+ * QC (if present)
+ */
+ pos = (u8 *) hdr;
+ aad[0] = 0; /* aad_len >> 8 */
+ aad[1] = aad_len & 0xff;
+ aad[2] = pos[0] & 0x8f;
+ aad[3] = pos[1] & 0xc7;
+ memcpy(aad + 4, hdr->addr1, 3 * ETH_ALEN);
+ pos = (u8 *) &hdr->seq_ctl;
+ aad[22] = pos[0] & 0x0f;
+ aad[23] = 0; /* all bits masked */
+ memset(aad + 24, 0, 8);
+ if (a4_included)
+ memcpy(aad + 24, hdr->addr4, ETH_ALEN);
+ if (qc_included) {
+ aad[a4_included ? 30 : 24] = qc;
+ /* rest of QC masked */
+ }
+
+ /* Start with the first block and AAD */
+ ieee80211_ccmp_aes_encrypt(tfm, b0, auth);
+ xor_block(auth, aad, AES_BLOCK_LEN);
+ ieee80211_ccmp_aes_encrypt(tfm, auth, auth);
+ xor_block(auth, &aad[AES_BLOCK_LEN], AES_BLOCK_LEN);
+ ieee80211_ccmp_aes_encrypt(tfm, auth, auth);
+ b0[0] &= 0x07;
+ b0[14] = b0[15] = 0;
+ ieee80211_ccmp_aes_encrypt(tfm, b0, s0);
+}
+
+
+static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+ struct ieee80211_ccmp_data *key = priv;
+ int data_len, i, blocks, last, len;
+ u8 *pos, *mic;
+ struct ieee80211_hdr *hdr;
+ u8 *b0 = key->tx_b0;
+ u8 *b = key->tx_b;
+ u8 *e = key->tx_e;
+ u8 *s0 = key->tx_s0;
+
+ if (skb_headroom(skb) < CCMP_HDR_LEN ||
+ skb_tailroom(skb) < CCMP_MIC_LEN ||
+ skb->len < hdr_len)
+ return -1;
+
+ data_len = skb->len - hdr_len;
+ pos = skb_push(skb, CCMP_HDR_LEN);
+ memmove(pos, pos + CCMP_HDR_LEN, hdr_len);
+ pos += hdr_len;
+ mic = skb_put(skb, CCMP_MIC_LEN);
+
+ i = CCMP_PN_LEN - 1;
+ while (i >= 0) {
+ key->tx_pn[i]++;
+ if (key->tx_pn[i] != 0)
+ break;
+ i--;
+ }
+
+ *pos++ = key->tx_pn[5];
+ *pos++ = key->tx_pn[4];
+ *pos++ = 0;
+ *pos++ = (key->key_idx << 6) | (1 << 5) /* Ext IV included */;
+ *pos++ = key->tx_pn[3];
+ *pos++ = key->tx_pn[2];
+ *pos++ = key->tx_pn[1];
+ *pos++ = key->tx_pn[0];
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0);
+
+ blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
+ last = data_len % AES_BLOCK_LEN;
+
+ for (i = 1; i <= blocks; i++) {
+ len = (i == blocks && last) ? last : AES_BLOCK_LEN;
+ /* Authentication */
+ xor_block(b, pos, len);
+ ieee80211_ccmp_aes_encrypt(key->tfm, b, b);
+ /* Encryption, with counter */
+ b0[14] = (i >> 8) & 0xff;
+ b0[15] = i & 0xff;
+ ieee80211_ccmp_aes_encrypt(key->tfm, b0, e);
+ xor_block(pos, e, len);
+ pos += len;
+ }
+
+ for (i = 0; i < CCMP_MIC_LEN; i++)
+ mic[i] = b[i] ^ s0[i];
+
+ return 0;
+}
+
+
+static int ieee80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+ struct ieee80211_ccmp_data *key = priv;
+ u8 keyidx, *pos;
+ struct ieee80211_hdr *hdr;
+ u8 *b0 = key->rx_b0;
+ u8 *b = key->rx_b;
+ u8 *a = key->rx_a;
+ u8 pn[6];
+ int i, blocks, last, len;
+ size_t data_len = skb->len - hdr_len - CCMP_HDR_LEN - CCMP_MIC_LEN;
+ u8 *mic = skb->data + skb->len - CCMP_MIC_LEN;
+
+ if (skb->len < hdr_len + CCMP_HDR_LEN + CCMP_MIC_LEN) {
+ key->dot11RSNAStatsCCMPFormatErrors++;
+ return -1;
+ }
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ pos = skb->data + hdr_len;
+ keyidx = pos[3];
+ if (!(keyidx & (1 << 5))) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "CCMP: received packet without ExtIV"
+ " flag from " MAC_FMT "\n", MAC_ARG(hdr->addr2));
+ }
+ key->dot11RSNAStatsCCMPFormatErrors++;
+ return -2;
+ }
+ keyidx >>= 6;
+ if (key->key_idx != keyidx) {
+ printk(KERN_DEBUG "CCMP: RX tkey->key_idx=%d frame "
+ "keyidx=%d priv=%p\n", key->key_idx, keyidx, priv);
+ return -6;
+ }
+ if (!key->key_set) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "CCMP: received packet from " MAC_FMT
+ " with keyid=%d that does not have a configured"
+ " key\n", MAC_ARG(hdr->addr2), keyidx);
+ }
+ return -3;
+ }
+
+ pn[0] = pos[7];
+ pn[1] = pos[6];
+ pn[2] = pos[5];
+ pn[3] = pos[4];
+ pn[4] = pos[1];
+ pn[5] = pos[0];
+ pos += 8;
+
+ if (memcmp(pn, key->rx_pn, CCMP_PN_LEN) <= 0) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "CCMP: replay detected: STA=" MAC_FMT
+ " previous PN %02x%02x%02x%02x%02x%02x "
+ "received PN %02x%02x%02x%02x%02x%02x\n",
+ MAC_ARG(hdr->addr2), MAC_ARG(key->rx_pn),
+ MAC_ARG(pn));
+ }
+ key->dot11RSNAStatsCCMPReplays++;
+ return -4;
+ }
+
+ ccmp_init_blocks(key->tfm, hdr, pn, data_len, b0, a, b);
+ xor_block(mic, b, CCMP_MIC_LEN);
+
+ blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
+ last = data_len % AES_BLOCK_LEN;
+
+ for (i = 1; i <= blocks; i++) {
+ len = (i == blocks && last) ? last : AES_BLOCK_LEN;
+ /* Decrypt, with counter */
+ b0[14] = (i >> 8) & 0xff;
+ b0[15] = i & 0xff;
+ ieee80211_ccmp_aes_encrypt(key->tfm, b0, b);
+ xor_block(pos, b, len);
+ /* Authentication */
+ xor_block(a, pos, len);
+ ieee80211_ccmp_aes_encrypt(key->tfm, a, a);
+ pos += len;
+ }
+
+ if (memcmp(mic, a, CCMP_MIC_LEN) != 0) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "CCMP: decrypt failed: STA="
+ MAC_FMT "\n", MAC_ARG(hdr->addr2));
+ }
+ key->dot11RSNAStatsCCMPDecryptErrors++;
+ return -5;
+ }
+
+ memcpy(key->rx_pn, pn, CCMP_PN_LEN);
+
+ /* Remove hdr and MIC */
+ memmove(skb->data + CCMP_HDR_LEN, skb->data, hdr_len);
+ skb_pull(skb, CCMP_HDR_LEN);
+ skb_trim(skb, skb->len - CCMP_MIC_LEN);
+
+ return keyidx;
+}
+
+
+static int ieee80211_ccmp_set_key(void *key, int len, u8 *seq, void *priv)
+{
+ struct ieee80211_ccmp_data *data = priv;
+ int keyidx;
+ struct crypto_tfm *tfm = data->tfm;
+
+ keyidx = data->key_idx;
+ memset(data, 0, sizeof(*data));
+ data->key_idx = keyidx;
+ data->tfm = tfm;
+ if (len == CCMP_TK_LEN) {
+ memcpy(data->key, key, CCMP_TK_LEN);
+ data->key_set = 1;
+ if (seq) {
+ data->rx_pn[0] = seq[5];
+ data->rx_pn[1] = seq[4];
+ data->rx_pn[2] = seq[3];
+ data->rx_pn[3] = seq[2];
+ data->rx_pn[4] = seq[1];
+ data->rx_pn[5] = seq[0];
+ }
+ crypto_cipher_setkey(data->tfm, data->key, CCMP_TK_LEN);
+ } else if (len == 0)
+ data->key_set = 0;
+ else
+ return -1;
+
+ return 0;
+}
+
+
+static int ieee80211_ccmp_get_key(void *key, int len, u8 *seq, void *priv)
+{
+ struct ieee80211_ccmp_data *data = priv;
+
+ if (len < CCMP_TK_LEN)
+ return -1;
+
+ if (!data->key_set)
+ return 0;
+ memcpy(key, data->key, CCMP_TK_LEN);
+
+ if (seq) {
+ seq[0] = data->tx_pn[5];
+ seq[1] = data->tx_pn[4];
+ seq[2] = data->tx_pn[3];
+ seq[3] = data->tx_pn[2];
+ seq[4] = data->tx_pn[1];
+ seq[5] = data->tx_pn[0];
+ }
+
+ return CCMP_TK_LEN;
+}
+
+
+static char * ieee80211_ccmp_print_stats(char *p, void *priv)
+{
+ struct ieee80211_ccmp_data *ccmp = priv;
+ p += sprintf(p, "key[%d] alg=CCMP key_set=%d "
+ "tx_pn=%02x%02x%02x%02x%02x%02x "
+ "rx_pn=%02x%02x%02x%02x%02x%02x "
+ "format_errors=%d replays=%d decrypt_errors=%d\n",
+ ccmp->key_idx, ccmp->key_set,
+ MAC_ARG(ccmp->tx_pn), MAC_ARG(ccmp->rx_pn),
+ ccmp->dot11RSNAStatsCCMPFormatErrors,
+ ccmp->dot11RSNAStatsCCMPReplays,
+ ccmp->dot11RSNAStatsCCMPDecryptErrors);
+
+ return p;
+}
+
+
+static struct ieee80211_crypto_ops ieee80211_crypt_ccmp = {
+ .name = "CCMP",
+ .init = ieee80211_ccmp_init,
+ .deinit = ieee80211_ccmp_deinit,
+ .encrypt_mpdu = ieee80211_ccmp_encrypt,
+ .decrypt_mpdu = ieee80211_ccmp_decrypt,
+ .encrypt_msdu = NULL,
+ .decrypt_msdu = NULL,
+ .set_key = ieee80211_ccmp_set_key,
+ .get_key = ieee80211_ccmp_get_key,
+ .print_stats = ieee80211_ccmp_print_stats,
+ .extra_prefix_len = CCMP_HDR_LEN,
+ .extra_postfix_len = CCMP_MIC_LEN,
+ .owner = THIS_MODULE,
+};
+
+
+static int __init ieee80211_crypto_ccmp_init(void)
+{
+ return ieee80211_register_crypto_ops(&ieee80211_crypt_ccmp);
+}
+
+
+static void __exit ieee80211_crypto_ccmp_exit(void)
+{
+ ieee80211_unregister_crypto_ops(&ieee80211_crypt_ccmp);
+}
+
+
+module_init(ieee80211_crypto_ccmp_init);
+module_exit(ieee80211_crypto_ccmp_exit);
--- /dev/null
+/*
+ * Host AP crypt: host-based TKIP encryption implementation for Host AP driver
+ *
+ * Copyright (c) 2003-2004, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <asm/string.h>
+
+#include <net/ieee80211.h>
+
+
+#include <linux/crypto.h>
+#include <asm/scatterlist.h>
+#include <linux/crc32.h>
+
+MODULE_AUTHOR("Jouni Malinen");
+MODULE_DESCRIPTION("Host AP crypt: TKIP");
+MODULE_LICENSE("GPL");
+
+struct ieee80211_tkip_data {
+#define TKIP_KEY_LEN 32
+ u8 key[TKIP_KEY_LEN];
+ int key_set;
+
+ u32 tx_iv32;
+ u16 tx_iv16;
+ u16 tx_ttak[5];
+ int tx_phase1_done;
+
+ u32 rx_iv32;
+ u16 rx_iv16;
+ u16 rx_ttak[5];
+ int rx_phase1_done;
+ u32 rx_iv32_new;
+ u16 rx_iv16_new;
+
+ u32 dot11RSNAStatsTKIPReplays;
+ u32 dot11RSNAStatsTKIPICVErrors;
+ u32 dot11RSNAStatsTKIPLocalMICFailures;
+
+ int key_idx;
+
+ struct crypto_tfm *tfm_arc4;
+ struct crypto_tfm *tfm_michael;
+
+ /* scratch buffers for virt_to_page() (crypto API) */
+ u8 rx_hdr[16], tx_hdr[16];
+};
+
+static void * ieee80211_tkip_init(int key_idx)
+{
+ struct ieee80211_tkip_data *priv;
+
+ priv = kmalloc(sizeof(*priv), GFP_ATOMIC);
+ if (priv == NULL)
+ goto fail;
+ memset(priv, 0, sizeof(*priv));
+ priv->key_idx = key_idx;
+
+ priv->tfm_arc4 = crypto_alloc_tfm("arc4", 0);
+ if (priv->tfm_arc4 == NULL) {
+ printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+ "crypto API arc4\n");
+ goto fail;
+ }
+
+ priv->tfm_michael = crypto_alloc_tfm("michael_mic", 0);
+ if (priv->tfm_michael == NULL) {
+ printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
+ "crypto API michael_mic\n");
+ goto fail;
+ }
+
+ return priv;
+
+fail:
+ if (priv) {
+ if (priv->tfm_michael)
+ crypto_free_tfm(priv->tfm_michael);
+ if (priv->tfm_arc4)
+ crypto_free_tfm(priv->tfm_arc4);
+ kfree(priv);
+ }
+
+ return NULL;
+}
+
+
+static void ieee80211_tkip_deinit(void *priv)
+{
+ struct ieee80211_tkip_data *_priv = priv;
+ if (_priv && _priv->tfm_michael)
+ crypto_free_tfm(_priv->tfm_michael);
+ if (_priv && _priv->tfm_arc4)
+ crypto_free_tfm(_priv->tfm_arc4);
+ kfree(priv);
+}
+
+
+static inline u16 RotR1(u16 val)
+{
+ return (val >> 1) | (val << 15);
+}
+
+
+static inline u8 Lo8(u16 val)
+{
+ return val & 0xff;
+}
+
+
+static inline u8 Hi8(u16 val)
+{
+ return val >> 8;
+}
+
+
+static inline u16 Lo16(u32 val)
+{
+ return val & 0xffff;
+}
+
+
+static inline u16 Hi16(u32 val)
+{
+ return val >> 16;
+}
+
+
+static inline u16 Mk16(u8 hi, u8 lo)
+{
+ return lo | (((u16) hi) << 8);
+}
+
+
+static inline u16 Mk16_le(u16 *v)
+{
+ return le16_to_cpu(*v);
+}
+
+
+static const u16 Sbox[256] =
+{
+ 0xC6A5, 0xF884, 0xEE99, 0xF68D, 0xFF0D, 0xD6BD, 0xDEB1, 0x9154,
+ 0x6050, 0x0203, 0xCEA9, 0x567D, 0xE719, 0xB562, 0x4DE6, 0xEC9A,
+ 0x8F45, 0x1F9D, 0x8940, 0xFA87, 0xEF15, 0xB2EB, 0x8EC9, 0xFB0B,
+ 0x41EC, 0xB367, 0x5FFD, 0x45EA, 0x23BF, 0x53F7, 0xE496, 0x9B5B,
+ 0x75C2, 0xE11C, 0x3DAE, 0x4C6A, 0x6C5A, 0x7E41, 0xF502, 0x834F,
+ 0x685C, 0x51F4, 0xD134, 0xF908, 0xE293, 0xAB73, 0x6253, 0x2A3F,
+ 0x080C, 0x9552, 0x4665, 0x9D5E, 0x3028, 0x37A1, 0x0A0F, 0x2FB5,
+ 0x0E09, 0x2436, 0x1B9B, 0xDF3D, 0xCD26, 0x4E69, 0x7FCD, 0xEA9F,
+ 0x121B, 0x1D9E, 0x5874, 0x342E, 0x362D, 0xDCB2, 0xB4EE, 0x5BFB,
+ 0xA4F6, 0x764D, 0xB761, 0x7DCE, 0x527B, 0xDD3E, 0x5E71, 0x1397,
+ 0xA6F5, 0xB968, 0x0000, 0xC12C, 0x4060, 0xE31F, 0x79C8, 0xB6ED,
+ 0xD4BE, 0x8D46, 0x67D9, 0x724B, 0x94DE, 0x98D4, 0xB0E8, 0x854A,
+ 0xBB6B, 0xC52A, 0x4FE5, 0xED16, 0x86C5, 0x9AD7, 0x6655, 0x1194,
+ 0x8ACF, 0xE910, 0x0406, 0xFE81, 0xA0F0, 0x7844, 0x25BA, 0x4BE3,
+ 0xA2F3, 0x5DFE, 0x80C0, 0x058A, 0x3FAD, 0x21BC, 0x7048, 0xF104,
+ 0x63DF, 0x77C1, 0xAF75, 0x4263, 0x2030, 0xE51A, 0xFD0E, 0xBF6D,
+ 0x814C, 0x1814, 0x2635, 0xC32F, 0xBEE1, 0x35A2, 0x88CC, 0x2E39,
+ 0x9357, 0x55F2, 0xFC82, 0x7A47, 0xC8AC, 0xBAE7, 0x322B, 0xE695,
+ 0xC0A0, 0x1998, 0x9ED1, 0xA37F, 0x4466, 0x547E, 0x3BAB, 0x0B83,
+ 0x8CCA, 0xC729, 0x6BD3, 0x283C, 0xA779, 0xBCE2, 0x161D, 0xAD76,
+ 0xDB3B, 0x6456, 0x744E, 0x141E, 0x92DB, 0x0C0A, 0x486C, 0xB8E4,
+ 0x9F5D, 0xBD6E, 0x43EF, 0xC4A6, 0x39A8, 0x31A4, 0xD337, 0xF28B,
+ 0xD532, 0x8B43, 0x6E59, 0xDAB7, 0x018C, 0xB164, 0x9CD2, 0x49E0,
+ 0xD8B4, 0xACFA, 0xF307, 0xCF25, 0xCAAF, 0xF48E, 0x47E9, 0x1018,
+ 0x6FD5, 0xF088, 0x4A6F, 0x5C72, 0x3824, 0x57F1, 0x73C7, 0x9751,
+ 0xCB23, 0xA17C, 0xE89C, 0x3E21, 0x96DD, 0x61DC, 0x0D86, 0x0F85,
+ 0xE090, 0x7C42, 0x71C4, 0xCCAA, 0x90D8, 0x0605, 0xF701, 0x1C12,
+ 0xC2A3, 0x6A5F, 0xAEF9, 0x69D0, 0x1791, 0x9958, 0x3A27, 0x27B9,
+ 0xD938, 0xEB13, 0x2BB3, 0x2233, 0xD2BB, 0xA970, 0x0789, 0x33A7,
+ 0x2DB6, 0x3C22, 0x1592, 0xC920, 0x8749, 0xAAFF, 0x5078, 0xA57A,
+ 0x038F, 0x59F8, 0x0980, 0x1A17, 0x65DA, 0xD731, 0x84C6, 0xD0B8,
+ 0x82C3, 0x29B0, 0x5A77, 0x1E11, 0x7BCB, 0xA8FC, 0x6DD6, 0x2C3A,
+};
+
+
+static inline u16 _S_(u16 v)
+{
+ u16 t = Sbox[Hi8(v)];
+ return Sbox[Lo8(v)] ^ ((t << 8) | (t >> 8));
+}
+
+
+#define PHASE1_LOOP_COUNT 8
+
+static void tkip_mixing_phase1(u16 *TTAK, const u8 *TK, const u8 *TA, u32 IV32)
+{
+ int i, j;
+
+ /* Initialize the 80-bit TTAK from TSC (IV32) and TA[0..5] */
+ TTAK[0] = Lo16(IV32);
+ TTAK[1] = Hi16(IV32);
+ TTAK[2] = Mk16(TA[1], TA[0]);
+ TTAK[3] = Mk16(TA[3], TA[2]);
+ TTAK[4] = Mk16(TA[5], TA[4]);
+
+ for (i = 0; i < PHASE1_LOOP_COUNT; i++) {
+ j = 2 * (i & 1);
+ TTAK[0] += _S_(TTAK[4] ^ Mk16(TK[1 + j], TK[0 + j]));
+ TTAK[1] += _S_(TTAK[0] ^ Mk16(TK[5 + j], TK[4 + j]));
+ TTAK[2] += _S_(TTAK[1] ^ Mk16(TK[9 + j], TK[8 + j]));
+ TTAK[3] += _S_(TTAK[2] ^ Mk16(TK[13 + j], TK[12 + j]));
+ TTAK[4] += _S_(TTAK[3] ^ Mk16(TK[1 + j], TK[0 + j])) + i;
+ }
+}
+
+
+static void tkip_mixing_phase2(u8 *WEPSeed, const u8 *TK, const u16 *TTAK,
+ u16 IV16)
+{
+ /* Make temporary area overlap WEP seed so that the final copy can be
+ * avoided on little endian hosts. */
+ u16 *PPK = (u16 *) &WEPSeed[4];
+
+ /* Step 1 - make copy of TTAK and bring in TSC */
+ PPK[0] = TTAK[0];
+ PPK[1] = TTAK[1];
+ PPK[2] = TTAK[2];
+ PPK[3] = TTAK[3];
+ PPK[4] = TTAK[4];
+ PPK[5] = TTAK[4] + IV16;
+
+ /* Step 2 - 96-bit bijective mixing using S-box */
+ PPK[0] += _S_(PPK[5] ^ Mk16_le((u16 *) &TK[0]));
+ PPK[1] += _S_(PPK[0] ^ Mk16_le((u16 *) &TK[2]));
+ PPK[2] += _S_(PPK[1] ^ Mk16_le((u16 *) &TK[4]));
+ PPK[3] += _S_(PPK[2] ^ Mk16_le((u16 *) &TK[6]));
+ PPK[4] += _S_(PPK[3] ^ Mk16_le((u16 *) &TK[8]));
+ PPK[5] += _S_(PPK[4] ^ Mk16_le((u16 *) &TK[10]));
+
+ PPK[0] += RotR1(PPK[5] ^ Mk16_le((u16 *) &TK[12]));
+ PPK[1] += RotR1(PPK[0] ^ Mk16_le((u16 *) &TK[14]));
+ PPK[2] += RotR1(PPK[1]);
+ PPK[3] += RotR1(PPK[2]);
+ PPK[4] += RotR1(PPK[3]);
+ PPK[5] += RotR1(PPK[4]);
+
+ /* Step 3 - bring in last of TK bits, assign 24-bit WEP IV value
+ * WEPSeed[0..2] is transmitted as WEP IV */
+ WEPSeed[0] = Hi8(IV16);
+ WEPSeed[1] = (Hi8(IV16) | 0x20) & 0x7F;
+ WEPSeed[2] = Lo8(IV16);
+ WEPSeed[3] = Lo8((PPK[5] ^ Mk16_le((u16 *) &TK[0])) >> 1);
+
+#ifdef __BIG_ENDIAN
+ {
+ int i;
+ for (i = 0; i < 6; i++)
+ PPK[i] = (PPK[i] << 8) | (PPK[i] >> 8);
+ }
+#endif
+}
+
+static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+ struct ieee80211_tkip_data *tkey = priv;
+ int len;
+ u8 rc4key[16], *pos, *icv;
+ struct ieee80211_hdr *hdr;
+ u32 crc;
+ struct scatterlist sg;
+
+ if (skb_headroom(skb) < 8 || skb_tailroom(skb) < 4 ||
+ skb->len < hdr_len)
+ return -1;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ if (!tkey->tx_phase1_done) {
+ tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2,
+ tkey->tx_iv32);
+ tkey->tx_phase1_done = 1;
+ }
+ tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16);
+
+ len = skb->len - hdr_len;
+ pos = skb_push(skb, 8);
+ memmove(pos, pos + 8, hdr_len);
+ pos += hdr_len;
+ icv = skb_put(skb, 4);
+
+ *pos++ = rc4key[0];
+ *pos++ = rc4key[1];
+ *pos++ = rc4key[2];
+ *pos++ = (tkey->key_idx << 6) | (1 << 5) /* Ext IV included */;
+ *pos++ = tkey->tx_iv32 & 0xff;
+ *pos++ = (tkey->tx_iv32 >> 8) & 0xff;
+ *pos++ = (tkey->tx_iv32 >> 16) & 0xff;
+ *pos++ = (tkey->tx_iv32 >> 24) & 0xff;
+
+ crc = ~crc32_le(~0, pos, len);
+ icv[0] = crc;
+ icv[1] = crc >> 8;
+ icv[2] = crc >> 16;
+ icv[3] = crc >> 24;
+
+ crypto_cipher_setkey(tkey->tfm_arc4, rc4key, 16);
+ sg.page = virt_to_page(pos);
+ sg.offset = offset_in_page(pos);
+ sg.length = len + 4;
+ crypto_cipher_encrypt(tkey->tfm_arc4, &sg, &sg, len + 4);
+
+ tkey->tx_iv16++;
+ if (tkey->tx_iv16 == 0) {
+ tkey->tx_phase1_done = 0;
+ tkey->tx_iv32++;
+ }
+
+ return 0;
+}
+
+static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+ struct ieee80211_tkip_data *tkey = priv;
+ u8 rc4key[16];
+ u8 keyidx, *pos;
+ u32 iv32;
+ u16 iv16;
+ struct ieee80211_hdr *hdr;
+ u8 icv[4];
+ u32 crc;
+ struct scatterlist sg;
+ int plen;
+
+ if (skb->len < hdr_len + 8 + 4)
+ return -1;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ pos = skb->data + hdr_len;
+ keyidx = pos[3];
+ if (!(keyidx & (1 << 5))) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "TKIP: received packet without ExtIV"
+ " flag from " MAC_FMT "\n", MAC_ARG(hdr->addr2));
+ }
+ return -2;
+ }
+ keyidx >>= 6;
+ if (tkey->key_idx != keyidx) {
+ printk(KERN_DEBUG "TKIP: RX tkey->key_idx=%d frame "
+ "keyidx=%d priv=%p\n", tkey->key_idx, keyidx, priv);
+ return -6;
+ }
+ if (!tkey->key_set) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "TKIP: received packet from " MAC_FMT
+ " with keyid=%d that does not have a configured"
+ " key\n", MAC_ARG(hdr->addr2), keyidx);
+ }
+ return -3;
+ }
+ iv16 = (pos[0] << 8) | pos[2];
+ iv32 = pos[4] | (pos[5] << 8) | (pos[6] << 16) | (pos[7] << 24);
+ pos += 8;
+
+ if (iv32 < tkey->rx_iv32 ||
+ (iv32 == tkey->rx_iv32 && iv16 <= tkey->rx_iv16)) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "TKIP: replay detected: STA=" MAC_FMT
+ " previous TSC %08x%04x received TSC "
+ "%08x%04x\n", MAC_ARG(hdr->addr2),
+ tkey->rx_iv32, tkey->rx_iv16, iv32, iv16);
+ }
+ tkey->dot11RSNAStatsTKIPReplays++;
+ return -4;
+ }
+
+ if (iv32 != tkey->rx_iv32 || !tkey->rx_phase1_done) {
+ tkip_mixing_phase1(tkey->rx_ttak, tkey->key, hdr->addr2, iv32);
+ tkey->rx_phase1_done = 1;
+ }
+ tkip_mixing_phase2(rc4key, tkey->key, tkey->rx_ttak, iv16);
+
+ plen = skb->len - hdr_len - 12;
+
+ crypto_cipher_setkey(tkey->tfm_arc4, rc4key, 16);
+ sg.page = virt_to_page(pos);
+ sg.offset = offset_in_page(pos);
+ sg.length = plen + 4;
+ crypto_cipher_decrypt(tkey->tfm_arc4, &sg, &sg, plen + 4);
+
+ crc = ~crc32_le(~0, pos, plen);
+ icv[0] = crc;
+ icv[1] = crc >> 8;
+ icv[2] = crc >> 16;
+ icv[3] = crc >> 24;
+ if (memcmp(icv, pos + plen, 4) != 0) {
+ if (iv32 != tkey->rx_iv32) {
+ /* Previously cached Phase1 result was already lost, so
+ * it needs to be recalculated for the next packet. */
+ tkey->rx_phase1_done = 0;
+ }
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "TKIP: ICV error detected: STA="
+ MAC_FMT "\n", MAC_ARG(hdr->addr2));
+ }
+ tkey->dot11RSNAStatsTKIPICVErrors++;
+ return -5;
+ }
+
+ /* Update real counters only after Michael MIC verification has
+ * completed */
+ tkey->rx_iv32_new = iv32;
+ tkey->rx_iv16_new = iv16;
+
+ /* Remove IV and ICV */
+ memmove(skb->data + 8, skb->data, hdr_len);
+ skb_pull(skb, 8);
+ skb_trim(skb, skb->len - 4);
+
+ return keyidx;
+}
+
+
+static int michael_mic(struct ieee80211_tkip_data *tkey, u8 *key, u8 *hdr,
+ u8 *data, size_t data_len, u8 *mic)
+{
+ struct scatterlist sg[2];
+
+ if (tkey->tfm_michael == NULL) {
+ printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
+ return -1;
+ }
+ sg[0].page = virt_to_page(hdr);
+ sg[0].offset = offset_in_page(hdr);
+ sg[0].length = 16;
+
+ sg[1].page = virt_to_page(data);
+ sg[1].offset = offset_in_page(data);
+ sg[1].length = data_len;
+
+ crypto_digest_init(tkey->tfm_michael);
+ crypto_digest_setkey(tkey->tfm_michael, key, 8);
+ crypto_digest_update(tkey->tfm_michael, sg, 2);
+ crypto_digest_final(tkey->tfm_michael, mic);
+
+ return 0;
+}
+
+static void michael_mic_hdr(struct sk_buff *skb, u8 *hdr)
+{
+ struct ieee80211_hdr *hdr11;
+
+ hdr11 = (struct ieee80211_hdr *) skb->data;
+ switch (le16_to_cpu(hdr11->frame_ctl) &
+ (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
+ case IEEE80211_FCTL_TODS:
+ memcpy(hdr, hdr11->addr3, ETH_ALEN); /* DA */
+ memcpy(hdr + ETH_ALEN, hdr11->addr2, ETH_ALEN); /* SA */
+ break;
+ case IEEE80211_FCTL_FROMDS:
+ memcpy(hdr, hdr11->addr1, ETH_ALEN); /* DA */
+ memcpy(hdr + ETH_ALEN, hdr11->addr3, ETH_ALEN); /* SA */
+ break;
+ case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
+ memcpy(hdr, hdr11->addr3, ETH_ALEN); /* DA */
+ memcpy(hdr + ETH_ALEN, hdr11->addr4, ETH_ALEN); /* SA */
+ break;
+ case 0:
+ memcpy(hdr, hdr11->addr1, ETH_ALEN); /* DA */
+ memcpy(hdr + ETH_ALEN, hdr11->addr2, ETH_ALEN); /* SA */
+ break;
+ }
+
+ hdr[12] = 0; /* priority */
+ hdr[13] = hdr[14] = hdr[15] = 0; /* reserved */
+}
+
+
+static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len, void *priv)
+{
+ struct ieee80211_tkip_data *tkey = priv;
+ u8 *pos;
+
+ if (skb_tailroom(skb) < 8 || skb->len < hdr_len) {
+ printk(KERN_DEBUG "Invalid packet for Michael MIC add "
+ "(tailroom=%d hdr_len=%d skb->len=%d)\n",
+ skb_tailroom(skb), hdr_len, skb->len);
+ return -1;
+ }
+
+ michael_mic_hdr(skb, tkey->tx_hdr);
+ pos = skb_put(skb, 8);
+ if (michael_mic(tkey, &tkey->key[16], tkey->tx_hdr,
+ skb->data + hdr_len, skb->len - 8 - hdr_len, pos))
+ return -1;
+
+ return 0;
+}
+
+
+#if WIRELESS_EXT >= 18
+static void ieee80211_michael_mic_failure(struct net_device *dev,
+ struct ieee80211_hdr *hdr,
+ int keyidx)
+{
+ union iwreq_data wrqu;
+ struct iw_michaelmicfailure ev;
+
+ /* TODO: needed parameters: count, keyid, key type, TSC */
+ memset(&ev, 0, sizeof(ev));
+ ev.flags = keyidx & IW_MICFAILURE_KEY_ID;
+ if (hdr->addr1[0] & 0x01)
+ ev.flags |= IW_MICFAILURE_GROUP;
+ else
+ ev.flags |= IW_MICFAILURE_PAIRWISE;
+ ev.src_addr.sa_family = ARPHRD_ETHER;
+ memcpy(ev.src_addr.sa_data, hdr->addr2, ETH_ALEN);
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = sizeof(ev);
+ wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, (char *) &ev);
+}
+#elif WIRELESS_EXT >= 15
+static void ieee80211_michael_mic_failure(struct net_device *dev,
+ struct ieee80211_hdr *hdr,
+ int keyidx)
+{
+ union iwreq_data wrqu;
+ char buf[128];
+
+ /* TODO: needed parameters: count, keyid, key type, TSC */
+ sprintf(buf, "MLME-MICHAELMICFAILURE.indication(keyid=%d %scast addr="
+ MAC_FMT ")", keyidx, hdr->addr1[0] & 0x01 ? "broad" : "uni",
+ MAC_ARG(hdr->addr2));
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = strlen(buf);
+ wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
+}
+#else /* WIRELESS_EXT >= 15 */
+static inline void ieee80211_michael_mic_failure(struct net_device *dev,
+ struct ieee80211_hdr *hdr,
+ int keyidx)
+{
+}
+#endif /* WIRELESS_EXT >= 15 */
+
+
+static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
+ int hdr_len, void *priv)
+{
+ struct ieee80211_tkip_data *tkey = priv;
+ u8 mic[8];
+
+ if (!tkey->key_set)
+ return -1;
+
+ michael_mic_hdr(skb, tkey->rx_hdr);
+ if (michael_mic(tkey, &tkey->key[24], tkey->rx_hdr,
+ skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
+ return -1;
+ if (memcmp(mic, skb->data + skb->len - 8, 8) != 0) {
+ struct ieee80211_hdr *hdr;
+ hdr = (struct ieee80211_hdr *) skb->data;
+ printk(KERN_DEBUG "%s: Michael MIC verification failed for "
+ "MSDU from " MAC_FMT " keyidx=%d\n",
+ skb->dev ? skb->dev->name : "N/A", MAC_ARG(hdr->addr2),
+ keyidx);
+ if (skb->dev)
+ ieee80211_michael_mic_failure(skb->dev, hdr, keyidx);
+ tkey->dot11RSNAStatsTKIPLocalMICFailures++;
+ return -1;
+ }
+
+ /* Update TSC counters for RX now that the packet verification has
+ * completed. */
+ tkey->rx_iv32 = tkey->rx_iv32_new;
+ tkey->rx_iv16 = tkey->rx_iv16_new;
+
+ skb_trim(skb, skb->len - 8);
+
+ return 0;
+}
+
+
+static int ieee80211_tkip_set_key(void *key, int len, u8 *seq, void *priv)
+{
+ struct ieee80211_tkip_data *tkey = priv;
+ int keyidx;
+ struct crypto_tfm *tfm = tkey->tfm_michael;
+ struct crypto_tfm *tfm2 = tkey->tfm_arc4;
+
+ keyidx = tkey->key_idx;
+ memset(tkey, 0, sizeof(*tkey));
+ tkey->key_idx = keyidx;
+ tkey->tfm_michael = tfm;
+ tkey->tfm_arc4 = tfm2;
+ if (len == TKIP_KEY_LEN) {
+ memcpy(tkey->key, key, TKIP_KEY_LEN);
+ tkey->key_set = 1;
+ tkey->tx_iv16 = 1; /* TSC is initialized to 1 */
+ if (seq) {
+ tkey->rx_iv32 = (seq[5] << 24) | (seq[4] << 16) |
+ (seq[3] << 8) | seq[2];
+ tkey->rx_iv16 = (seq[1] << 8) | seq[0];
+ }
+ } else if (len == 0)
+ tkey->key_set = 0;
+ else
+ return -1;
+
+ return 0;
+}
+
+
+static int ieee80211_tkip_get_key(void *key, int len, u8 *seq, void *priv)
+{
+ struct ieee80211_tkip_data *tkey = priv;
+
+ if (len < TKIP_KEY_LEN)
+ return -1;
+
+ if (!tkey->key_set)
+ return 0;
+ memcpy(key, tkey->key, TKIP_KEY_LEN);
+
+ if (seq) {
+ /* Return the sequence number of the last transmitted frame. */
+ u16 iv16 = tkey->tx_iv16;
+ u32 iv32 = tkey->tx_iv32;
+ if (iv16 == 0)
+ iv32--;
+ iv16--;
+ seq[0] = tkey->tx_iv16;
+ seq[1] = tkey->tx_iv16 >> 8;
+ seq[2] = tkey->tx_iv32;
+ seq[3] = tkey->tx_iv32 >> 8;
+ seq[4] = tkey->tx_iv32 >> 16;
+ seq[5] = tkey->tx_iv32 >> 24;
+ }
+
+ return TKIP_KEY_LEN;
+}
+
+
+static char * ieee80211_tkip_print_stats(char *p, void *priv)
+{
+ struct ieee80211_tkip_data *tkip = priv;
+ p += sprintf(p, "key[%d] alg=TKIP key_set=%d "
+ "tx_pn=%02x%02x%02x%02x%02x%02x "
+ "rx_pn=%02x%02x%02x%02x%02x%02x "
+ "replays=%d icv_errors=%d local_mic_failures=%d\n",
+ tkip->key_idx, tkip->key_set,
+ (tkip->tx_iv32 >> 24) & 0xff,
+ (tkip->tx_iv32 >> 16) & 0xff,
+ (tkip->tx_iv32 >> 8) & 0xff,
+ tkip->tx_iv32 & 0xff,
+ (tkip->tx_iv16 >> 8) & 0xff,
+ tkip->tx_iv16 & 0xff,
+ (tkip->rx_iv32 >> 24) & 0xff,
+ (tkip->rx_iv32 >> 16) & 0xff,
+ (tkip->rx_iv32 >> 8) & 0xff,
+ tkip->rx_iv32 & 0xff,
+ (tkip->rx_iv16 >> 8) & 0xff,
+ tkip->rx_iv16 & 0xff,
+ tkip->dot11RSNAStatsTKIPReplays,
+ tkip->dot11RSNAStatsTKIPICVErrors,
+ tkip->dot11RSNAStatsTKIPLocalMICFailures);
+ return p;
+}
+
+
+static struct ieee80211_crypto_ops ieee80211_crypt_tkip = {
+ .name = "TKIP",
+ .init = ieee80211_tkip_init,
+ .deinit = ieee80211_tkip_deinit,
+ .encrypt_mpdu = ieee80211_tkip_encrypt,
+ .decrypt_mpdu = ieee80211_tkip_decrypt,
+ .encrypt_msdu = ieee80211_michael_mic_add,
+ .decrypt_msdu = ieee80211_michael_mic_verify,
+ .set_key = ieee80211_tkip_set_key,
+ .get_key = ieee80211_tkip_get_key,
+ .print_stats = ieee80211_tkip_print_stats,
+ .extra_prefix_len = 4 + 4, /* IV + ExtIV */
+ .extra_postfix_len = 8 + 4, /* MIC + ICV */
+ .owner = THIS_MODULE,
+};
+
+
+static int __init ieee80211_crypto_tkip_init(void)
+{
+ return ieee80211_register_crypto_ops(&ieee80211_crypt_tkip);
+}
+
+
+static void __exit ieee80211_crypto_tkip_exit(void)
+{
+ ieee80211_unregister_crypto_ops(&ieee80211_crypt_tkip);
+}
+
+
+module_init(ieee80211_crypto_tkip_init);
+module_exit(ieee80211_crypto_tkip_exit);
--- /dev/null
+/*
+ * Host AP crypt: host-based WEP encryption implementation for Host AP driver
+ *
+ * Copyright (c) 2002-2004, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/skbuff.h>
+#include <asm/string.h>
+
+#include <net/ieee80211.h>
+
+
+#include <linux/crypto.h>
+#include <asm/scatterlist.h>
+#include <linux/crc32.h>
+
+MODULE_AUTHOR("Jouni Malinen");
+MODULE_DESCRIPTION("Host AP crypt: WEP");
+MODULE_LICENSE("GPL");
+
+
+struct prism2_wep_data {
+ u32 iv;
+#define WEP_KEY_LEN 13
+ u8 key[WEP_KEY_LEN + 1];
+ u8 key_len;
+ u8 key_idx;
+ struct crypto_tfm *tfm;
+};
+
+
+static void * prism2_wep_init(int keyidx)
+{
+ struct prism2_wep_data *priv;
+
+ priv = kmalloc(sizeof(*priv), GFP_ATOMIC);
+ if (priv == NULL)
+ goto fail;
+ memset(priv, 0, sizeof(*priv));
+ priv->key_idx = keyidx;
+
+ priv->tfm = crypto_alloc_tfm("arc4", 0);
+ if (priv->tfm == NULL) {
+ printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
+ "crypto API arc4\n");
+ goto fail;
+ }
+
+ /* start WEP IV from a random value */
+ get_random_bytes(&priv->iv, 4);
+
+ return priv;
+
+fail:
+ if (priv) {
+ if (priv->tfm)
+ crypto_free_tfm(priv->tfm);
+ kfree(priv);
+ }
+ return NULL;
+}
+
+
+static void prism2_wep_deinit(void *priv)
+{
+ struct prism2_wep_data *_priv = priv;
+ if (_priv && _priv->tfm)
+ crypto_free_tfm(_priv->tfm);
+ kfree(priv);
+}
+
+
+/* Perform WEP encryption on given skb that has at least 4 bytes of headroom
+ * for IV and 4 bytes of tailroom for ICV. Both IV and ICV will be transmitted,
+ * so the payload length increases with 8 bytes.
+ *
+ * WEP frame payload: IV + TX key idx, RC4(data), ICV = RC4(CRC32(data))
+ */
+static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+ struct prism2_wep_data *wep = priv;
+ u32 crc, klen, len;
+ u8 key[WEP_KEY_LEN + 3];
+ u8 *pos, *icv;
+ struct scatterlist sg;
+
+ if (skb_headroom(skb) < 4 || skb_tailroom(skb) < 4 ||
+ skb->len < hdr_len)
+ return -1;
+
+ len = skb->len - hdr_len;
+ pos = skb_push(skb, 4);
+ memmove(pos, pos + 4, hdr_len);
+ pos += hdr_len;
+
+ klen = 3 + wep->key_len;
+
+ wep->iv++;
+
+ /* Fluhrer, Mantin, and Shamir have reported weaknesses in the key
+ * scheduling algorithm of RC4. At least IVs (KeyByte + 3, 0xff, N)
+ * can be used to speedup attacks, so avoid using them. */
+ if ((wep->iv & 0xff00) == 0xff00) {
+ u8 B = (wep->iv >> 16) & 0xff;
+ if (B >= 3 && B < klen)
+ wep->iv += 0x0100;
+ }
+
+ /* Prepend 24-bit IV to RC4 key and TX frame */
+ *pos++ = key[0] = (wep->iv >> 16) & 0xff;
+ *pos++ = key[1] = (wep->iv >> 8) & 0xff;
+ *pos++ = key[2] = wep->iv & 0xff;
+ *pos++ = wep->key_idx << 6;
+
+ /* Copy rest of the WEP key (the secret part) */
+ memcpy(key + 3, wep->key, wep->key_len);
+
+ /* Append little-endian CRC32 and encrypt it to produce ICV */
+ crc = ~crc32_le(~0, pos, len);
+ icv = skb_put(skb, 4);
+ icv[0] = crc;
+ icv[1] = crc >> 8;
+ icv[2] = crc >> 16;
+ icv[3] = crc >> 24;
+
+ crypto_cipher_setkey(wep->tfm, key, klen);
+ sg.page = virt_to_page(pos);
+ sg.offset = offset_in_page(pos);
+ sg.length = len + 4;
+ crypto_cipher_encrypt(wep->tfm, &sg, &sg, len + 4);
+
+ return 0;
+}
+
+
+/* Perform WEP decryption on given buffer. Buffer includes whole WEP part of
+ * the frame: IV (4 bytes), encrypted payload (including SNAP header),
+ * ICV (4 bytes). len includes both IV and ICV.
+ *
+ * Returns 0 if frame was decrypted successfully and ICV was correct and -1 on
+ * failure. If frame is OK, IV and ICV will be removed.
+ */
+static int prism2_wep_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
+{
+ struct prism2_wep_data *wep = priv;
+ u32 crc, klen, plen;
+ u8 key[WEP_KEY_LEN + 3];
+ u8 keyidx, *pos, icv[4];
+ struct scatterlist sg;
+
+ if (skb->len < hdr_len + 8)
+ return -1;
+
+ pos = skb->data + hdr_len;
+ key[0] = *pos++;
+ key[1] = *pos++;
+ key[2] = *pos++;
+ keyidx = *pos++ >> 6;
+ if (keyidx != wep->key_idx)
+ return -1;
+
+ klen = 3 + wep->key_len;
+
+ /* Copy rest of the WEP key (the secret part) */
+ memcpy(key + 3, wep->key, wep->key_len);
+
+ /* Apply RC4 to data and compute CRC32 over decrypted data */
+ plen = skb->len - hdr_len - 8;
+
+ crypto_cipher_setkey(wep->tfm, key, klen);
+ sg.page = virt_to_page(pos);
+ sg.offset = offset_in_page(pos);
+ sg.length = plen + 4;
+ crypto_cipher_decrypt(wep->tfm, &sg, &sg, plen + 4);
+
+ crc = ~crc32_le(~0, pos, plen);
+ icv[0] = crc;
+ icv[1] = crc >> 8;
+ icv[2] = crc >> 16;
+ icv[3] = crc >> 24;
+ if (memcmp(icv, pos + plen, 4) != 0) {
+ /* ICV mismatch - drop frame */
+ return -2;
+ }
+
+ /* Remove IV and ICV */
+ memmove(skb->data + 4, skb->data, hdr_len);
+ skb_pull(skb, 4);
+ skb_trim(skb, skb->len - 4);
+
+ return 0;
+}
+
+
+static int prism2_wep_set_key(void *key, int len, u8 *seq, void *priv)
+{
+ struct prism2_wep_data *wep = priv;
+
+ if (len < 0 || len > WEP_KEY_LEN)
+ return -1;
+
+ memcpy(wep->key, key, len);
+ wep->key_len = len;
+
+ return 0;
+}
+
+
+static int prism2_wep_get_key(void *key, int len, u8 *seq, void *priv)
+{
+ struct prism2_wep_data *wep = priv;
+
+ if (len < wep->key_len)
+ return -1;
+
+ memcpy(key, wep->key, wep->key_len);
+
+ return wep->key_len;
+}
+
+
+static char * prism2_wep_print_stats(char *p, void *priv)
+{
+ struct prism2_wep_data *wep = priv;
+ p += sprintf(p, "key[%d] alg=WEP len=%d\n",
+ wep->key_idx, wep->key_len);
+ return p;
+}
+
+
+static struct ieee80211_crypto_ops ieee80211_crypt_wep = {
+ .name = "WEP",
+ .init = prism2_wep_init,
+ .deinit = prism2_wep_deinit,
+ .encrypt_mpdu = prism2_wep_encrypt,
+ .decrypt_mpdu = prism2_wep_decrypt,
+ .encrypt_msdu = NULL,
+ .decrypt_msdu = NULL,
+ .set_key = prism2_wep_set_key,
+ .get_key = prism2_wep_get_key,
+ .print_stats = prism2_wep_print_stats,
+ .extra_prefix_len = 4, /* IV */
+ .extra_postfix_len = 4, /* ICV */
+ .owner = THIS_MODULE,
+};
+
+
+static int __init ieee80211_crypto_wep_init(void)
+{
+ return ieee80211_register_crypto_ops(&ieee80211_crypt_wep);
+}
+
+
+static void __exit ieee80211_crypto_wep_exit(void)
+{
+ ieee80211_unregister_crypto_ops(&ieee80211_crypt_wep);
+}
+
+
+module_init(ieee80211_crypto_wep_init);
+module_exit(ieee80211_crypto_wep_exit);
--- /dev/null
+/*******************************************************************************
+
+ Copyright(c) 2004 Intel Corporation. All rights reserved.
+
+ Portions of this file are based on the WEP enablement code provided by the
+ Host AP project hostap-drivers v0.1.3
+ Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ <jkmaline@cc.hut.fi>
+ Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/compiler.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <asm/uaccess.h>
+#include <net/arp.h>
+
+#include <net/ieee80211.h>
+
+MODULE_DESCRIPTION("802.11 data/management/control stack");
+MODULE_AUTHOR("Copyright (C) 2004 Intel Corporation <jketreno@linux.intel.com>");
+MODULE_LICENSE("GPL");
+
+#define DRV_NAME "ieee80211"
+
+static inline int ieee80211_networks_allocate(struct ieee80211_device *ieee)
+{
+ if (ieee->networks)
+ return 0;
+
+ ieee->networks = kmalloc(
+ MAX_NETWORK_COUNT * sizeof(struct ieee80211_network),
+ GFP_KERNEL);
+ if (!ieee->networks) {
+ printk(KERN_WARNING "%s: Out of memory allocating beacons\n",
+ ieee->dev->name);
+ return -ENOMEM;
+ }
+
+ memset(ieee->networks, 0,
+ MAX_NETWORK_COUNT * sizeof(struct ieee80211_network));
+
+ return 0;
+}
+
+static inline void ieee80211_networks_free(struct ieee80211_device *ieee)
+{
+ if (!ieee->networks)
+ return;
+ kfree(ieee->networks);
+ ieee->networks = NULL;
+}
+
+static inline void ieee80211_networks_initialize(struct ieee80211_device *ieee)
+{
+ int i;
+
+ INIT_LIST_HEAD(&ieee->network_free_list);
+ INIT_LIST_HEAD(&ieee->network_list);
+ for (i = 0; i < MAX_NETWORK_COUNT; i++)
+ list_add_tail(&ieee->networks[i].list, &ieee->network_free_list);
+}
+
+
+struct net_device *alloc_ieee80211(int sizeof_priv)
+{
+ struct ieee80211_device *ieee;
+ struct net_device *dev;
+ int err;
+
+ IEEE80211_DEBUG_INFO("Initializing...\n");
+
+ dev = alloc_etherdev(sizeof(struct ieee80211_device) + sizeof_priv);
+ if (!dev) {
+ IEEE80211_ERROR("Unable to network device.\n");
+ goto failed;
+ }
+ ieee = netdev_priv(dev);
+ dev->hard_start_xmit = ieee80211_xmit;
+
+ ieee->dev = dev;
+
+ err = ieee80211_networks_allocate(ieee);
+ if (err) {
+ IEEE80211_ERROR("Unable to allocate beacon storage: %d\n",
+ err);
+ goto failed;
+ }
+ ieee80211_networks_initialize(ieee);
+
+ /* Default fragmentation threshold is maximum payload size */
+ ieee->fts = DEFAULT_FTS;
+ ieee->scan_age = DEFAULT_MAX_SCAN_AGE;
+ ieee->open_wep = 1;
+
+ /* Default to enabling full open WEP with host based encrypt/decrypt */
+ ieee->host_encrypt = 1;
+ ieee->host_decrypt = 1;
+ ieee->ieee802_1x = 1; /* Default to supporting 802.1x */
+
+ INIT_LIST_HEAD(&ieee->crypt_deinit_list);
+ init_timer(&ieee->crypt_deinit_timer);
+ ieee->crypt_deinit_timer.data = (unsigned long)ieee;
+ ieee->crypt_deinit_timer.function = ieee80211_crypt_deinit_handler;
+
+ spin_lock_init(&ieee->lock);
+
+ ieee->wpa_enabled = 0;
+ ieee->tkip_countermeasures = 0;
+ ieee->drop_unencrypted = 0;
+ ieee->privacy_invoked = 0;
+ ieee->ieee802_1x = 1;
+
+ return dev;
+
+ failed:
+ if (dev)
+ free_netdev(dev);
+ return NULL;
+}
+
+
+void free_ieee80211(struct net_device *dev)
+{
+ struct ieee80211_device *ieee = netdev_priv(dev);
+
+ int i;
+
+ del_timer_sync(&ieee->crypt_deinit_timer);
+ ieee80211_crypt_deinit_entries(ieee, 1);
+
+ for (i = 0; i < WEP_KEYS; i++) {
+ struct ieee80211_crypt_data *crypt = ieee->crypt[i];
+ if (crypt) {
+ if (crypt->ops) {
+ crypt->ops->deinit(crypt->priv);
+ module_put(crypt->ops->owner);
+ }
+ kfree(crypt);
+ ieee->crypt[i] = NULL;
+ }
+ }
+
+ ieee80211_networks_free(ieee);
+ free_netdev(dev);
+}
+
+#ifdef CONFIG_IEEE80211_DEBUG
+
+static int debug = 0;
+u32 ieee80211_debug_level = 0;
+struct proc_dir_entry *ieee80211_proc = NULL;
+
+static int show_debug_level(char *page, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ return snprintf(page, count, "0x%08X\n", ieee80211_debug_level);
+}
+
+static int store_debug_level(struct file *file, const char __user *buffer,
+ unsigned long count, void *data)
+{
+ char buf[] = "0x00000000";
+ char *p = (char *)buf;
+ unsigned long val;
+
+ if (count > sizeof(buf) - 1)
+ count = sizeof(buf) - 1;
+
+ if (copy_from_user(buf, buffer, count))
+ return count;
+ buf[count] = 0;
+ /*
+ * what a FPOS... What, sscanf(buf, "%i", &val) would be too
+ * scary?
+ */
+ if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
+ p++;
+ if (p[0] == 'x' || p[0] == 'X')
+ p++;
+ val = simple_strtoul(p, &p, 16);
+ } else
+ val = simple_strtoul(p, &p, 10);
+ if (p == buf)
+ printk(KERN_INFO DRV_NAME
+ ": %s is not in hex or decimal form.\n", buf);
+ else
+ ieee80211_debug_level = val;
+
+ return strlen(buf);
+}
+
+static int __init ieee80211_init(void)
+{
+ struct proc_dir_entry *e;
+
+ ieee80211_debug_level = debug;
+ ieee80211_proc = create_proc_entry(DRV_NAME, S_IFDIR, proc_net);
+ if (ieee80211_proc == NULL) {
+ IEEE80211_ERROR("Unable to create " DRV_NAME
+ " proc directory\n");
+ return -EIO;
+ }
+ e = create_proc_entry("debug_level", S_IFREG | S_IRUGO | S_IWUSR,
+ ieee80211_proc);
+ if (!e) {
+ remove_proc_entry(DRV_NAME, proc_net);
+ ieee80211_proc = NULL;
+ return -EIO;
+ }
+ e->read_proc = show_debug_level;
+ e->write_proc = store_debug_level;
+ e->data = NULL;
+
+ return 0;
+}
+
+static void __exit ieee80211_exit(void)
+{
+ if (ieee80211_proc) {
+ remove_proc_entry("debug_level", ieee80211_proc);
+ remove_proc_entry(DRV_NAME, proc_net);
+ ieee80211_proc = NULL;
+ }
+}
+
+#include <linux/moduleparam.h>
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "debug output mask");
+
+
+module_exit(ieee80211_exit);
+module_init(ieee80211_init);
+#endif
+
+EXPORT_SYMBOL(alloc_ieee80211);
+EXPORT_SYMBOL(free_ieee80211);
--- /dev/null
+/*
+ * Original code based Host AP (software wireless LAN access point) driver
+ * for Intersil Prism2/2.5/3 - hostap.o module, common routines
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+#include <linux/compiler.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <asm/uaccess.h>
+#include <linux/ctype.h>
+
+#include <net/ieee80211.h>
+
+static inline void ieee80211_monitor_rx(struct ieee80211_device *ieee,
+ struct sk_buff *skb,
+ struct ieee80211_rx_stats *rx_stats)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ u16 fc = le16_to_cpu(hdr->frame_ctl);
+
+ skb->dev = ieee->dev;
+ skb->mac.raw = skb->data;
+ skb_pull(skb, ieee80211_get_hdrlen(fc));
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = __constant_htons(ETH_P_80211_RAW);
+ memset(skb->cb, 0, sizeof(skb->cb));
+ netif_rx(skb);
+}
+
+
+/* Called only as a tasklet (software IRQ) */
+static struct ieee80211_frag_entry *
+ieee80211_frag_cache_find(struct ieee80211_device *ieee, unsigned int seq,
+ unsigned int frag, u8 *src, u8 *dst)
+{
+ struct ieee80211_frag_entry *entry;
+ int i;
+
+ for (i = 0; i < IEEE80211_FRAG_CACHE_LEN; i++) {
+ entry = &ieee->frag_cache[i];
+ if (entry->skb != NULL &&
+ time_after(jiffies, entry->first_frag_time + 2 * HZ)) {
+ IEEE80211_DEBUG_FRAG(
+ "expiring fragment cache entry "
+ "seq=%u last_frag=%u\n",
+ entry->seq, entry->last_frag);
+ dev_kfree_skb_any(entry->skb);
+ entry->skb = NULL;
+ }
+
+ if (entry->skb != NULL && entry->seq == seq &&
+ (entry->last_frag + 1 == frag || frag == -1) &&
+ memcmp(entry->src_addr, src, ETH_ALEN) == 0 &&
+ memcmp(entry->dst_addr, dst, ETH_ALEN) == 0)
+ return entry;
+ }
+
+ return NULL;
+}
+
+/* Called only as a tasklet (software IRQ) */
+static struct sk_buff *
+ieee80211_frag_cache_get(struct ieee80211_device *ieee,
+ struct ieee80211_hdr *hdr)
+{
+ struct sk_buff *skb = NULL;
+ u16 sc;
+ unsigned int frag, seq;
+ struct ieee80211_frag_entry *entry;
+
+ sc = le16_to_cpu(hdr->seq_ctl);
+ frag = WLAN_GET_SEQ_FRAG(sc);
+ seq = WLAN_GET_SEQ_SEQ(sc);
+
+ if (frag == 0) {
+ /* Reserve enough space to fit maximum frame length */
+ skb = dev_alloc_skb(ieee->dev->mtu +
+ sizeof(struct ieee80211_hdr) +
+ 8 /* LLC */ +
+ 2 /* alignment */ +
+ 8 /* WEP */ + ETH_ALEN /* WDS */);
+ if (skb == NULL)
+ return NULL;
+
+ entry = &ieee->frag_cache[ieee->frag_next_idx];
+ ieee->frag_next_idx++;
+ if (ieee->frag_next_idx >= IEEE80211_FRAG_CACHE_LEN)
+ ieee->frag_next_idx = 0;
+
+ if (entry->skb != NULL)
+ dev_kfree_skb_any(entry->skb);
+
+ entry->first_frag_time = jiffies;
+ entry->seq = seq;
+ entry->last_frag = frag;
+ entry->skb = skb;
+ memcpy(entry->src_addr, hdr->addr2, ETH_ALEN);
+ memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN);
+ } else {
+ /* received a fragment of a frame for which the head fragment
+ * should have already been received */
+ entry = ieee80211_frag_cache_find(ieee, seq, frag, hdr->addr2,
+ hdr->addr1);
+ if (entry != NULL) {
+ entry->last_frag = frag;
+ skb = entry->skb;
+ }
+ }
+
+ return skb;
+}
+
+
+/* Called only as a tasklet (software IRQ) */
+static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
+ struct ieee80211_hdr *hdr)
+{
+ u16 sc;
+ unsigned int seq;
+ struct ieee80211_frag_entry *entry;
+
+ sc = le16_to_cpu(hdr->seq_ctl);
+ seq = WLAN_GET_SEQ_SEQ(sc);
+
+ entry = ieee80211_frag_cache_find(ieee, seq, -1, hdr->addr2,
+ hdr->addr1);
+
+ if (entry == NULL) {
+ IEEE80211_DEBUG_FRAG(
+ "could not invalidate fragment cache "
+ "entry (seq=%u)\n", seq);
+ return -1;
+ }
+
+ entry->skb = NULL;
+ return 0;
+}
+
+
+#ifdef NOT_YET
+/* ieee80211_rx_frame_mgtmt
+ *
+ * Responsible for handling management control frames
+ *
+ * Called by ieee80211_rx */
+static inline int
+ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
+ struct ieee80211_rx_stats *rx_stats, u16 type,
+ u16 stype)
+{
+ if (ieee->iw_mode == IW_MODE_MASTER) {
+ printk(KERN_DEBUG "%s: Master mode not yet suppported.\n",
+ ieee->dev->name);
+ return 0;
+/*
+ hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr *)
+ skb->data);*/
+ }
+
+ if (ieee->hostapd && type == WLAN_FC_TYPE_MGMT) {
+ if (stype == WLAN_FC_STYPE_BEACON &&
+ ieee->iw_mode == IW_MODE_MASTER) {
+ struct sk_buff *skb2;
+ /* Process beacon frames also in kernel driver to
+ * update STA(AP) table statistics */
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (skb2)
+ hostap_rx(skb2->dev, skb2, rx_stats);
+ }
+
+ /* send management frames to the user space daemon for
+ * processing */
+ ieee->apdevstats.rx_packets++;
+ ieee->apdevstats.rx_bytes += skb->len;
+ prism2_rx_80211(ieee->apdev, skb, rx_stats, PRISM2_RX_MGMT);
+ return 0;
+ }
+
+ if (ieee->iw_mode == IW_MODE_MASTER) {
+ if (type != WLAN_FC_TYPE_MGMT && type != WLAN_FC_TYPE_CTRL) {
+ printk(KERN_DEBUG "%s: unknown management frame "
+ "(type=0x%02x, stype=0x%02x) dropped\n",
+ skb->dev->name, type, stype);
+ return -1;
+ }
+
+ hostap_rx(skb->dev, skb, rx_stats);
+ return 0;
+ }
+
+ printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: management frame "
+ "received in non-Host AP mode\n", skb->dev->name);
+ return -1;
+}
+#endif
+
+
+/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
+/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
+static unsigned char rfc1042_header[] =
+{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
+static unsigned char bridge_tunnel_header[] =
+{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
+/* No encapsulation header if EtherType < 0x600 (=length) */
+
+/* Called by ieee80211_rx_frame_decrypt */
+static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee,
+ struct sk_buff *skb)
+{
+ struct net_device *dev = ieee->dev;
+ u16 fc, ethertype;
+ struct ieee80211_hdr *hdr;
+ u8 *pos;
+
+ if (skb->len < 24)
+ return 0;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ fc = le16_to_cpu(hdr->frame_ctl);
+
+ /* check that the frame is unicast frame to us */
+ if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+ IEEE80211_FCTL_TODS &&
+ memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0 &&
+ memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) {
+ /* ToDS frame with own addr BSSID and DA */
+ } else if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+ IEEE80211_FCTL_FROMDS &&
+ memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0) {
+ /* FromDS frame with own addr as DA */
+ } else
+ return 0;
+
+ if (skb->len < 24 + 8)
+ return 0;
+
+ /* check for port access entity Ethernet type */
+ pos = skb->data + 24;
+ ethertype = (pos[6] << 8) | pos[7];
+ if (ethertype == ETH_P_PAE)
+ return 1;
+
+ return 0;
+}
+
+/* Called only as a tasklet (software IRQ), by ieee80211_rx */
+static inline int
+ieee80211_rx_frame_decrypt(struct ieee80211_device* ieee, struct sk_buff *skb,
+ struct ieee80211_crypt_data *crypt)
+{
+ struct ieee80211_hdr *hdr;
+ int res, hdrlen;
+
+ if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
+ return 0;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
+
+#ifdef CONFIG_IEEE80211_CRYPT_TKIP
+ if (ieee->tkip_countermeasures &&
+ strcmp(crypt->ops->name, "TKIP") == 0) {
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
+ "received packet from " MAC_FMT "\n",
+ ieee->dev->name, MAC_ARG(hdr->addr2));
+ }
+ return -1;
+ }
+#endif
+
+ atomic_inc(&crypt->refcnt);
+ res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
+ atomic_dec(&crypt->refcnt);
+ if (res < 0) {
+ IEEE80211_DEBUG_DROP(
+ "decryption failed (SA=" MAC_FMT
+ ") res=%d\n", MAC_ARG(hdr->addr2), res);
+ if (res == -2)
+ IEEE80211_DEBUG_DROP("Decryption failed ICV "
+ "mismatch (key %d)\n",
+ skb->data[hdrlen + 3] >> 6);
+ ieee->ieee_stats.rx_discards_undecryptable++;
+ return -1;
+ }
+
+ return res;
+}
+
+
+/* Called only as a tasklet (software IRQ), by ieee80211_rx */
+static inline int
+ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device* ieee, struct sk_buff *skb,
+ int keyidx, struct ieee80211_crypt_data *crypt)
+{
+ struct ieee80211_hdr *hdr;
+ int res, hdrlen;
+
+ if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
+ return 0;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
+
+ atomic_inc(&crypt->refcnt);
+ res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv);
+ atomic_dec(&crypt->refcnt);
+ if (res < 0) {
+ printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
+ " (SA=" MAC_FMT " keyidx=%d)\n",
+ ieee->dev->name, MAC_ARG(hdr->addr2), keyidx);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+/* All received frames are sent to this function. @skb contains the frame in
+ * IEEE 802.11 format, i.e., in the format it was sent over air.
+ * This function is called only as a tasklet (software IRQ). */
+int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
+ struct ieee80211_rx_stats *rx_stats)
+{
+ struct net_device *dev = ieee->dev;
+ struct ieee80211_hdr *hdr;
+ size_t hdrlen;
+ u16 fc, type, stype, sc;
+ struct net_device_stats *stats;
+ unsigned int frag;
+ u8 *payload;
+ u16 ethertype;
+#ifdef NOT_YET
+ struct net_device *wds = NULL;
+ struct sk_buff *skb2 = NULL;
+ struct net_device *wds = NULL;
+ int frame_authorized = 0;
+ int from_assoc_ap = 0;
+ void *sta = NULL;
+#endif
+ u8 dst[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ struct ieee80211_crypt_data *crypt = NULL;
+ int keyidx = 0;
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ stats = &ieee->stats;
+
+ if (skb->len < 10) {
+ printk(KERN_INFO "%s: SKB length < 10\n",
+ dev->name);
+ goto rx_dropped;
+ }
+
+ fc = le16_to_cpu(hdr->frame_ctl);
+ type = WLAN_FC_GET_TYPE(fc);
+ stype = WLAN_FC_GET_STYPE(fc);
+ sc = le16_to_cpu(hdr->seq_ctl);
+ frag = WLAN_GET_SEQ_FRAG(sc);
+ hdrlen = ieee80211_get_hdrlen(fc);
+
+#ifdef NOT_YET
+#if WIRELESS_EXT > 15
+ /* Put this code here so that we avoid duplicating it in all
+ * Rx paths. - Jean II */
+#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
+ /* If spy monitoring on */
+ if (iface->spy_data.spy_number > 0) {
+ struct iw_quality wstats;
+ wstats.level = rx_stats->signal;
+ wstats.noise = rx_stats->noise;
+ wstats.updated = 6; /* No qual value */
+ /* Update spy records */
+ wireless_spy_update(dev, hdr->addr2, &wstats);
+ }
+#endif /* IW_WIRELESS_SPY */
+#endif /* WIRELESS_EXT > 15 */
+ hostap_update_rx_stats(local->ap, hdr, rx_stats);
+#endif
+
+#if WIRELESS_EXT > 15
+ if (ieee->iw_mode == IW_MODE_MONITOR) {
+ ieee80211_monitor_rx(ieee, skb, rx_stats);
+ stats->rx_packets++;
+ stats->rx_bytes += skb->len;
+ return 1;
+ }
+#endif
+
+ if (ieee->host_decrypt) {
+ int idx = 0;
+ if (skb->len >= hdrlen + 3)
+ idx = skb->data[hdrlen + 3] >> 6;
+ crypt = ieee->crypt[idx];
+#ifdef NOT_YET
+ sta = NULL;
+
+ /* Use station specific key to override default keys if the
+ * receiver address is a unicast address ("individual RA"). If
+ * bcrx_sta_key parameter is set, station specific key is used
+ * even with broad/multicast targets (this is against IEEE
+ * 802.11, but makes it easier to use different keys with
+ * stations that do not support WEP key mapping). */
+
+ if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key)
+ (void) hostap_handle_sta_crypto(local, hdr, &crypt,
+ &sta);
+#endif
+
+ /* allow NULL decrypt to indicate an station specific override
+ * for default encryption */
+ if (crypt && (crypt->ops == NULL ||
+ crypt->ops->decrypt_mpdu == NULL))
+ crypt = NULL;
+
+ if (!crypt && (fc & IEEE80211_FCTL_WEP)) {
+ /* This seems to be triggered by some (multicast?)
+ * frames from other than current BSS, so just drop the
+ * frames silently instead of filling system log with
+ * these reports. */
+ IEEE80211_DEBUG_DROP("Decryption failed (not set)"
+ " (SA=" MAC_FMT ")\n",
+ MAC_ARG(hdr->addr2));
+ ieee->ieee_stats.rx_discards_undecryptable++;
+ goto rx_dropped;
+ }
+ }
+
+#ifdef NOT_YET
+ if (type != WLAN_FC_TYPE_DATA) {
+ if (type == WLAN_FC_TYPE_MGMT && stype == WLAN_FC_STYPE_AUTH &&
+ fc & IEEE80211_FCTL_WEP && ieee->host_decrypt &&
+ (keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0)
+ {
+ printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
+ "from " MAC_FMT "\n", dev->name,
+ MAC_ARG(hdr->addr2));
+ /* TODO: could inform hostapd about this so that it
+ * could send auth failure report */
+ goto rx_dropped;
+ }
+
+ if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
+ goto rx_dropped;
+ else
+ goto rx_exit;
+ }
+#endif
+
+ /* Data frame - extract src/dst addresses */
+ if (skb->len < IEEE80211_3ADDR_LEN)
+ goto rx_dropped;
+
+ switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
+ case IEEE80211_FCTL_FROMDS:
+ memcpy(dst, hdr->addr1, ETH_ALEN);
+ memcpy(src, hdr->addr3, ETH_ALEN);
+ break;
+ case IEEE80211_FCTL_TODS:
+ memcpy(dst, hdr->addr3, ETH_ALEN);
+ memcpy(src, hdr->addr2, ETH_ALEN);
+ break;
+ case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
+ if (skb->len < IEEE80211_4ADDR_LEN)
+ goto rx_dropped;
+ memcpy(dst, hdr->addr3, ETH_ALEN);
+ memcpy(src, hdr->addr4, ETH_ALEN);
+ break;
+ case 0:
+ memcpy(dst, hdr->addr1, ETH_ALEN);
+ memcpy(src, hdr->addr2, ETH_ALEN);
+ break;
+ }
+
+#ifdef NOT_YET
+ if (hostap_rx_frame_wds(ieee, hdr, fc, &wds))
+ goto rx_dropped;
+ if (wds) {
+ skb->dev = dev = wds;
+ stats = hostap_get_stats(dev);
+ }
+
+ if (ieee->iw_mode == IW_MODE_MASTER && !wds &&
+ (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == IEEE80211_FCTL_FROMDS &&
+ ieee->stadev &&
+ memcmp(hdr->addr2, ieee->assoc_ap_addr, ETH_ALEN) == 0) {
+ /* Frame from BSSID of the AP for which we are a client */
+ skb->dev = dev = ieee->stadev;
+ stats = hostap_get_stats(dev);
+ from_assoc_ap = 1;
+ }
+#endif
+
+ dev->last_rx = jiffies;
+
+#ifdef NOT_YET
+ if ((ieee->iw_mode == IW_MODE_MASTER ||
+ ieee->iw_mode == IW_MODE_REPEAT) &&
+ !from_assoc_ap) {
+ switch (hostap_handle_sta_rx(ieee, dev, skb, rx_stats,
+ wds != NULL)) {
+ case AP_RX_CONTINUE_NOT_AUTHORIZED:
+ frame_authorized = 0;
+ break;
+ case AP_RX_CONTINUE:
+ frame_authorized = 1;
+ break;
+ case AP_RX_DROP:
+ goto rx_dropped;
+ case AP_RX_EXIT:
+ goto rx_exit;
+ }
+ }
+#endif
+
+ /* Nullfunc frames may have PS-bit set, so they must be passed to
+ * hostap_handle_sta_rx() before being dropped here. */
+ if (stype != IEEE80211_STYPE_DATA &&
+ stype != IEEE80211_STYPE_DATA_CFACK &&
+ stype != IEEE80211_STYPE_DATA_CFPOLL &&
+ stype != IEEE80211_STYPE_DATA_CFACKPOLL) {
+ if (stype != IEEE80211_STYPE_NULLFUNC)
+ IEEE80211_DEBUG_DROP(
+ "RX: dropped data frame "
+ "with no data (type=0x%02x, "
+ "subtype=0x%02x, len=%d)\n",
+ type, stype, skb->len);
+ goto rx_dropped;
+ }
+
+ /* skb: hdr + (possibly fragmented, possibly encrypted) payload */
+
+ if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
+ (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
+ goto rx_dropped;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+
+ /* skb: hdr + (possibly fragmented) plaintext payload */
+ // PR: FIXME: hostap has additional conditions in the "if" below:
+ // ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
+ if ((frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) {
+ int flen;
+ struct sk_buff *frag_skb = ieee80211_frag_cache_get(ieee, hdr);
+ IEEE80211_DEBUG_FRAG("Rx Fragment received (%u)\n", frag);
+
+ if (!frag_skb) {
+ IEEE80211_DEBUG(IEEE80211_DL_RX | IEEE80211_DL_FRAG,
+ "Rx cannot get skb from fragment "
+ "cache (morefrag=%d seq=%u frag=%u)\n",
+ (fc & IEEE80211_FCTL_MOREFRAGS) != 0,
+ WLAN_GET_SEQ_SEQ(sc), frag);
+ goto rx_dropped;
+ }
+
+ flen = skb->len;
+ if (frag != 0)
+ flen -= hdrlen;
+
+ if (frag_skb->tail + flen > frag_skb->end) {
+ printk(KERN_WARNING "%s: host decrypted and "
+ "reassembled frame did not fit skb\n",
+ dev->name);
+ ieee80211_frag_cache_invalidate(ieee, hdr);
+ goto rx_dropped;
+ }
+
+ if (frag == 0) {
+ /* copy first fragment (including full headers) into
+ * beginning of the fragment cache skb */
+ memcpy(skb_put(frag_skb, flen), skb->data, flen);
+ } else {
+ /* append frame payload to the end of the fragment
+ * cache skb */
+ memcpy(skb_put(frag_skb, flen), skb->data + hdrlen,
+ flen);
+ }
+ dev_kfree_skb_any(skb);
+ skb = NULL;
+
+ if (fc & IEEE80211_FCTL_MOREFRAGS) {
+ /* more fragments expected - leave the skb in fragment
+ * cache for now; it will be delivered to upper layers
+ * after all fragments have been received */
+ goto rx_exit;
+ }
+
+ /* this was the last fragment and the frame will be
+ * delivered, so remove skb from fragment cache */
+ skb = frag_skb;
+ hdr = (struct ieee80211_hdr *) skb->data;
+ ieee80211_frag_cache_invalidate(ieee, hdr);
+ }
+
+ /* skb: hdr + (possible reassembled) full MSDU payload; possibly still
+ * encrypted/authenticated */
+ if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
+ ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
+ goto rx_dropped;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep) {
+ if (/*ieee->ieee802_1x &&*/
+ ieee80211_is_eapol_frame(ieee, skb)) {
+#ifdef CONFIG_IEEE80211_DEBUG
+ /* pass unencrypted EAPOL frames even if encryption is
+ * configured */
+ struct eapol *eap = (struct eapol *)(skb->data +
+ 24);
+ IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
+ eap_get_type(eap->type));
+#endif
+ } else {
+ IEEE80211_DEBUG_DROP(
+ "encryption configured, but RX "
+ "frame not encrypted (SA=" MAC_FMT ")\n",
+ MAC_ARG(hdr->addr2));
+ goto rx_dropped;
+ }
+ }
+
+#ifdef CONFIG_IEEE80211_DEBUG
+ if (crypt && !(fc & IEEE80211_FCTL_WEP) &&
+ ieee80211_is_eapol_frame(ieee, skb)) {
+ struct eapol *eap = (struct eapol *)(skb->data +
+ 24);
+ IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
+ eap_get_type(eap->type));
+ }
+#endif
+
+ if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep &&
+ !ieee80211_is_eapol_frame(ieee, skb)) {
+ IEEE80211_DEBUG_DROP(
+ "dropped unencrypted RX data "
+ "frame from " MAC_FMT
+ " (drop_unencrypted=1)\n",
+ MAC_ARG(hdr->addr2));
+ goto rx_dropped;
+ }
+
+ /* skb: hdr + (possible reassembled) full plaintext payload */
+
+ payload = skb->data + hdrlen;
+ ethertype = (payload[6] << 8) | payload[7];
+
+#ifdef NOT_YET
+ /* If IEEE 802.1X is used, check whether the port is authorized to send
+ * the received frame. */
+ if (ieee->ieee802_1x && ieee->iw_mode == IW_MODE_MASTER) {
+ if (ethertype == ETH_P_PAE) {
+ printk(KERN_DEBUG "%s: RX: IEEE 802.1X frame\n",
+ dev->name);
+ if (ieee->hostapd && ieee->apdev) {
+ /* Send IEEE 802.1X frames to the user
+ * space daemon for processing */
+ prism2_rx_80211(ieee->apdev, skb, rx_stats,
+ PRISM2_RX_MGMT);
+ ieee->apdevstats.rx_packets++;
+ ieee->apdevstats.rx_bytes += skb->len;
+ goto rx_exit;
+ }
+ } else if (!frame_authorized) {
+ printk(KERN_DEBUG "%s: dropped frame from "
+ "unauthorized port (IEEE 802.1X): "
+ "ethertype=0x%04x\n",
+ dev->name, ethertype);
+ goto rx_dropped;
+ }
+ }
+#endif
+
+ /* convert hdr + possible LLC headers into Ethernet header */
+ if (skb->len - hdrlen >= 8 &&
+ ((memcmp(payload, rfc1042_header, SNAP_SIZE) == 0 &&
+ ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
+ memcmp(payload, bridge_tunnel_header, SNAP_SIZE) == 0)) {
+ /* remove RFC1042 or Bridge-Tunnel encapsulation and
+ * replace EtherType */
+ skb_pull(skb, hdrlen + SNAP_SIZE);
+ memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
+ memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
+ } else {
+ u16 len;
+ /* Leave Ethernet header part of hdr and full payload */
+ skb_pull(skb, hdrlen);
+ len = htons(skb->len);
+ memcpy(skb_push(skb, 2), &len, 2);
+ memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
+ memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
+ }
+
+#ifdef NOT_YET
+ if (wds && ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
+ IEEE80211_FCTL_TODS) &&
+ skb->len >= ETH_HLEN + ETH_ALEN) {
+ /* Non-standard frame: get addr4 from its bogus location after
+ * the payload */
+ memcpy(skb->data + ETH_ALEN,
+ skb->data + skb->len - ETH_ALEN, ETH_ALEN);
+ skb_trim(skb, skb->len - ETH_ALEN);
+ }
+#endif
+
+ stats->rx_packets++;
+ stats->rx_bytes += skb->len;
+
+#ifdef NOT_YET
+ if (ieee->iw_mode == IW_MODE_MASTER && !wds &&
+ ieee->ap->bridge_packets) {
+ if (dst[0] & 0x01) {
+ /* copy multicast frame both to the higher layers and
+ * to the wireless media */
+ ieee->ap->bridged_multicast++;
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (skb2 == NULL)
+ printk(KERN_DEBUG "%s: skb_clone failed for "
+ "multicast frame\n", dev->name);
+ } else if (hostap_is_sta_assoc(ieee->ap, dst)) {
+ /* send frame directly to the associated STA using
+ * wireless media and not passing to higher layers */
+ ieee->ap->bridged_unicast++;
+ skb2 = skb;
+ skb = NULL;
+ }
+ }
+
+ if (skb2 != NULL) {
+ /* send to wireless media */
+ skb2->protocol = __constant_htons(ETH_P_802_3);
+ skb2->mac.raw = skb2->nh.raw = skb2->data;
+ /* skb2->nh.raw = skb2->data + ETH_HLEN; */
+ skb2->dev = dev;
+ dev_queue_xmit(skb2);
+ }
+
+#endif
+
+ if (skb) {
+ skb->protocol = eth_type_trans(skb, dev);
+ memset(skb->cb, 0, sizeof(skb->cb));
+ skb->dev = dev;
+ skb->ip_summed = CHECKSUM_NONE; /* 802.11 crc not sufficient */
+ netif_rx(skb);
+ }
+
+ rx_exit:
+#ifdef NOT_YET
+ if (sta)
+ hostap_handle_sta_release(sta);
+#endif
+ return 1;
+
+ rx_dropped:
+ stats->rx_dropped++;
+
+ /* Returning 0 indicates to caller that we have not handled the SKB--
+ * so it is still allocated and can be used again by underlying
+ * hardware as a DMA target */
+ return 0;
+}
+
+#define MGMT_FRAME_FIXED_PART_LENGTH 0x24
+
+static inline int ieee80211_is_ofdm_rate(u8 rate)
+{
+ switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
+ case IEEE80211_OFDM_RATE_6MB:
+ case IEEE80211_OFDM_RATE_9MB:
+ case IEEE80211_OFDM_RATE_12MB:
+ case IEEE80211_OFDM_RATE_18MB:
+ case IEEE80211_OFDM_RATE_24MB:
+ case IEEE80211_OFDM_RATE_36MB:
+ case IEEE80211_OFDM_RATE_48MB:
+ case IEEE80211_OFDM_RATE_54MB:
+ return 1;
+ }
+ return 0;
+}
+
+
+static inline int ieee80211_network_init(
+ struct ieee80211_device *ieee,
+ struct ieee80211_probe_response *beacon,
+ struct ieee80211_network *network,
+ struct ieee80211_rx_stats *stats)
+{
+#ifdef CONFIG_IEEE80211_DEBUG
+ char rates_str[64];
+ char *p;
+#endif
+ struct ieee80211_info_element *info_element;
+ u16 left;
+ u8 i;
+
+ /* Pull out fixed field data */
+ memcpy(network->bssid, beacon->header.addr3, ETH_ALEN);
+ network->capability = beacon->capability;
+ network->last_scanned = jiffies;
+ network->time_stamp[0] = beacon->time_stamp[0];
+ network->time_stamp[1] = beacon->time_stamp[1];
+ network->beacon_interval = beacon->beacon_interval;
+ /* Where to pull this? beacon->listen_interval;*/
+ network->listen_interval = 0x0A;
+ network->rates_len = network->rates_ex_len = 0;
+ network->last_associate = 0;
+ network->ssid_len = 0;
+ network->flags = 0;
+ network->atim_window = 0;
+
+ if (stats->freq == IEEE80211_52GHZ_BAND) {
+ /* for A band (No DS info) */
+ network->channel = stats->received_channel;
+ } else
+ network->flags |= NETWORK_HAS_CCK;
+
+ network->wpa_ie_len = 0;
+ network->rsn_ie_len = 0;
+
+ info_element = &beacon->info_element;
+ left = stats->len - ((void *)info_element - (void *)beacon);
+ while (left >= sizeof(struct ieee80211_info_element_hdr)) {
+ if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
+ IEEE80211_DEBUG_SCAN("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%d left=%d.\n",
+ info_element->len + sizeof(struct ieee80211_info_element),
+ left);
+ return 1;
+ }
+
+ switch (info_element->id) {
+ case MFIE_TYPE_SSID:
+ if (ieee80211_is_empty_essid(info_element->data,
+ info_element->len)) {
+ network->flags |= NETWORK_EMPTY_ESSID;
+ break;
+ }
+
+ network->ssid_len = min(info_element->len,
+ (u8)IW_ESSID_MAX_SIZE);
+ memcpy(network->ssid, info_element->data, network->ssid_len);
+ if (network->ssid_len < IW_ESSID_MAX_SIZE)
+ memset(network->ssid + network->ssid_len, 0,
+ IW_ESSID_MAX_SIZE - network->ssid_len);
+
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_SSID: '%s' len=%d.\n",
+ network->ssid, network->ssid_len);
+ break;
+
+ case MFIE_TYPE_RATES:
+#ifdef CONFIG_IEEE80211_DEBUG
+ p = rates_str;
+#endif
+ network->rates_len = min(info_element->len, MAX_RATES_LENGTH);
+ for (i = 0; i < network->rates_len; i++) {
+ network->rates[i] = info_element->data[i];
+#ifdef CONFIG_IEEE80211_DEBUG
+ p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
+#endif
+ if (ieee80211_is_ofdm_rate(info_element->data[i])) {
+ network->flags |= NETWORK_HAS_OFDM;
+ if (info_element->data[i] &
+ IEEE80211_BASIC_RATE_MASK)
+ network->flags &=
+ ~NETWORK_HAS_CCK;
+ }
+ }
+
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES: '%s' (%d)\n",
+ rates_str, network->rates_len);
+ break;
+
+ case MFIE_TYPE_RATES_EX:
+#ifdef CONFIG_IEEE80211_DEBUG
+ p = rates_str;
+#endif
+ network->rates_ex_len = min(info_element->len, MAX_RATES_EX_LENGTH);
+ for (i = 0; i < network->rates_ex_len; i++) {
+ network->rates_ex[i] = info_element->data[i];
+#ifdef CONFIG_IEEE80211_DEBUG
+ p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
+#endif
+ if (ieee80211_is_ofdm_rate(info_element->data[i])) {
+ network->flags |= NETWORK_HAS_OFDM;
+ if (info_element->data[i] &
+ IEEE80211_BASIC_RATE_MASK)
+ network->flags &=
+ ~NETWORK_HAS_CCK;
+ }
+ }
+
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES_EX: '%s' (%d)\n",
+ rates_str, network->rates_ex_len);
+ break;
+
+ case MFIE_TYPE_DS_SET:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_DS_SET: %d\n",
+ info_element->data[0]);
+ if (stats->freq == IEEE80211_24GHZ_BAND)
+ network->channel = info_element->data[0];
+ break;
+
+ case MFIE_TYPE_FH_SET:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_FH_SET: ignored\n");
+ break;
+
+ case MFIE_TYPE_CF_SET:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_CF_SET: ignored\n");
+ break;
+
+ case MFIE_TYPE_TIM:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_TIM: ignored\n");
+ break;
+
+ case MFIE_TYPE_IBSS_SET:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_IBSS_SET: ignored\n");
+ break;
+
+ case MFIE_TYPE_CHALLENGE:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_CHALLENGE: ignored\n");
+ break;
+
+ case MFIE_TYPE_GENERIC:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_GENERIC: %d bytes\n",
+ info_element->len);
+ if (info_element->len >= 4 &&
+ info_element->data[0] == 0x00 &&
+ info_element->data[1] == 0x50 &&
+ info_element->data[2] == 0xf2 &&
+ info_element->data[3] == 0x01) {
+ network->wpa_ie_len = min(info_element->len + 2,
+ MAX_WPA_IE_LEN);
+ memcpy(network->wpa_ie, info_element,
+ network->wpa_ie_len);
+ }
+ break;
+
+ case MFIE_TYPE_RSN:
+ IEEE80211_DEBUG_SCAN("MFIE_TYPE_RSN: %d bytes\n",
+ info_element->len);
+ network->rsn_ie_len = min(info_element->len + 2,
+ MAX_WPA_IE_LEN);
+ memcpy(network->rsn_ie, info_element,
+ network->rsn_ie_len);
+ break;
+
+ default:
+ IEEE80211_DEBUG_SCAN("unsupported IE %d\n",
+ info_element->id);
+ break;
+ }
+
+ left -= sizeof(struct ieee80211_info_element_hdr) +
+ info_element->len;
+ info_element = (struct ieee80211_info_element *)
+ &info_element->data[info_element->len];
+ }
+
+ network->mode = 0;
+ if (stats->freq == IEEE80211_52GHZ_BAND)
+ network->mode = IEEE_A;
+ else {
+ if (network->flags & NETWORK_HAS_OFDM)
+ network->mode |= IEEE_G;
+ if (network->flags & NETWORK_HAS_CCK)
+ network->mode |= IEEE_B;
+ }
+
+ if (network->mode == 0) {
+ IEEE80211_DEBUG_SCAN("Filtered out '%s (" MAC_FMT ")' "
+ "network.\n",
+ escape_essid(network->ssid,
+ network->ssid_len),
+ MAC_ARG(network->bssid));
+ return 1;
+ }
+
+ if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
+ network->flags |= NETWORK_EMPTY_ESSID;
+
+ memcpy(&network->stats, stats, sizeof(network->stats));
+
+ return 0;
+}
+
+static inline int is_same_network(struct ieee80211_network *src,
+ struct ieee80211_network *dst)
+{
+ /* A network is only a duplicate if the channel, BSSID, and ESSID
+ * all match. We treat all <hidden> with the same BSSID and channel
+ * as one network */
+ return ((src->ssid_len == dst->ssid_len) &&
+ (src->channel == dst->channel) &&
+ !memcmp(src->bssid, dst->bssid, ETH_ALEN) &&
+ !memcmp(src->ssid, dst->ssid, src->ssid_len));
+}
+
+static inline void update_network(struct ieee80211_network *dst,
+ struct ieee80211_network *src)
+{
+ memcpy(&dst->stats, &src->stats, sizeof(struct ieee80211_rx_stats));
+ dst->capability = src->capability;
+ memcpy(dst->rates, src->rates, src->rates_len);
+ dst->rates_len = src->rates_len;
+ memcpy(dst->rates_ex, src->rates_ex, src->rates_ex_len);
+ dst->rates_ex_len = src->rates_ex_len;
+
+ dst->mode = src->mode;
+ dst->flags = src->flags;
+ dst->time_stamp[0] = src->time_stamp[0];
+ dst->time_stamp[1] = src->time_stamp[1];
+
+ dst->beacon_interval = src->beacon_interval;
+ dst->listen_interval = src->listen_interval;
+ dst->atim_window = src->atim_window;
+
+ memcpy(dst->wpa_ie, src->wpa_ie, src->wpa_ie_len);
+ dst->wpa_ie_len = src->wpa_ie_len;
+ memcpy(dst->rsn_ie, src->rsn_ie, src->rsn_ie_len);
+ dst->rsn_ie_len = src->rsn_ie_len;
+
+ dst->last_scanned = jiffies;
+ /* dst->last_associate is not overwritten */
+}
+
+static inline void ieee80211_process_probe_response(
+ struct ieee80211_device *ieee,
+ struct ieee80211_probe_response *beacon,
+ struct ieee80211_rx_stats *stats)
+{
+ struct ieee80211_network network;
+ struct ieee80211_network *target;
+ struct ieee80211_network *oldest = NULL;
+#ifdef CONFIG_IEEE80211_DEBUG
+ struct ieee80211_info_element *info_element = &beacon->info_element;
+#endif
+ unsigned long flags;
+
+ IEEE80211_DEBUG_SCAN(
+ "'%s' (" MAC_FMT "): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
+ escape_essid(info_element->data, info_element->len),
+ MAC_ARG(beacon->header.addr3),
+ (beacon->capability & (1<<0xf)) ? '1' : '0',
+ (beacon->capability & (1<<0xe)) ? '1' : '0',
+ (beacon->capability & (1<<0xd)) ? '1' : '0',
+ (beacon->capability & (1<<0xc)) ? '1' : '0',
+ (beacon->capability & (1<<0xb)) ? '1' : '0',
+ (beacon->capability & (1<<0xa)) ? '1' : '0',
+ (beacon->capability & (1<<0x9)) ? '1' : '0',
+ (beacon->capability & (1<<0x8)) ? '1' : '0',
+ (beacon->capability & (1<<0x7)) ? '1' : '0',
+ (beacon->capability & (1<<0x6)) ? '1' : '0',
+ (beacon->capability & (1<<0x5)) ? '1' : '0',
+ (beacon->capability & (1<<0x4)) ? '1' : '0',
+ (beacon->capability & (1<<0x3)) ? '1' : '0',
+ (beacon->capability & (1<<0x2)) ? '1' : '0',
+ (beacon->capability & (1<<0x1)) ? '1' : '0',
+ (beacon->capability & (1<<0x0)) ? '1' : '0');
+
+ if (ieee80211_network_init(ieee, beacon, &network, stats)) {
+ IEEE80211_DEBUG_SCAN("Dropped '%s' (" MAC_FMT ") via %s.\n",
+ escape_essid(info_element->data,
+ info_element->len),
+ MAC_ARG(beacon->header.addr3),
+ WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
+ IEEE80211_STYPE_PROBE_RESP ?
+ "PROBE RESPONSE" : "BEACON");
+ return;
+ }
+
+ /* The network parsed correctly -- so now we scan our known networks
+ * to see if we can find it in our list.
+ *
+ * NOTE: This search is definitely not optimized. Once its doing
+ * the "right thing" we'll optimize it for efficiency if
+ * necessary */
+
+ /* Search for this entry in the list and update it if it is
+ * already there. */
+
+ spin_lock_irqsave(&ieee->lock, flags);
+
+ list_for_each_entry(target, &ieee->network_list, list) {
+ if (is_same_network(target, &network))
+ break;
+
+ if ((oldest == NULL) ||
+ (target->last_scanned < oldest->last_scanned))
+ oldest = target;
+ }
+
+ /* If we didn't find a match, then get a new network slot to initialize
+ * with this beacon's information */
+ if (&target->list == &ieee->network_list) {
+ if (list_empty(&ieee->network_free_list)) {
+ /* If there are no more slots, expire the oldest */
+ list_del(&oldest->list);
+ target = oldest;
+ IEEE80211_DEBUG_SCAN("Expired '%s' (" MAC_FMT ") from "
+ "network list.\n",
+ escape_essid(target->ssid,
+ target->ssid_len),
+ MAC_ARG(target->bssid));
+ } else {
+ /* Otherwise just pull from the free list */
+ target = list_entry(ieee->network_free_list.next,
+ struct ieee80211_network, list);
+ list_del(ieee->network_free_list.next);
+ }
+
+
+#ifdef CONFIG_IEEE80211_DEBUG
+ IEEE80211_DEBUG_SCAN("Adding '%s' (" MAC_FMT ") via %s.\n",
+ escape_essid(network.ssid,
+ network.ssid_len),
+ MAC_ARG(network.bssid),
+ WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
+ IEEE80211_STYPE_PROBE_RESP ?
+ "PROBE RESPONSE" : "BEACON");
+#endif
+ memcpy(target, &network, sizeof(*target));
+ list_add_tail(&target->list, &ieee->network_list);
+ } else {
+ IEEE80211_DEBUG_SCAN("Updating '%s' (" MAC_FMT ") via %s.\n",
+ escape_essid(target->ssid,
+ target->ssid_len),
+ MAC_ARG(target->bssid),
+ WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
+ IEEE80211_STYPE_PROBE_RESP ?
+ "PROBE RESPONSE" : "BEACON");
+ update_network(target, &network);
+ }
+
+ spin_unlock_irqrestore(&ieee->lock, flags);
+}
+
+void ieee80211_rx_mgt(struct ieee80211_device *ieee,
+ struct ieee80211_hdr *header,
+ struct ieee80211_rx_stats *stats)
+{
+ switch (WLAN_FC_GET_STYPE(header->frame_ctl)) {
+ case IEEE80211_STYPE_ASSOC_RESP:
+ IEEE80211_DEBUG_MGMT("received ASSOCIATION RESPONSE (%d)\n",
+ WLAN_FC_GET_STYPE(header->frame_ctl));
+ break;
+
+ case IEEE80211_STYPE_REASSOC_RESP:
+ IEEE80211_DEBUG_MGMT("received REASSOCIATION RESPONSE (%d)\n",
+ WLAN_FC_GET_STYPE(header->frame_ctl));
+ break;
+
+ case IEEE80211_STYPE_PROBE_RESP:
+ IEEE80211_DEBUG_MGMT("received PROBE RESPONSE (%d)\n",
+ WLAN_FC_GET_STYPE(header->frame_ctl));
+ IEEE80211_DEBUG_SCAN("Probe response\n");
+ ieee80211_process_probe_response(
+ ieee, (struct ieee80211_probe_response *)header, stats);
+ break;
+
+ case IEEE80211_STYPE_BEACON:
+ IEEE80211_DEBUG_MGMT("received BEACON (%d)\n",
+ WLAN_FC_GET_STYPE(header->frame_ctl));
+ IEEE80211_DEBUG_SCAN("Beacon\n");
+ ieee80211_process_probe_response(
+ ieee, (struct ieee80211_probe_response *)header, stats);
+ break;
+
+ default:
+ IEEE80211_DEBUG_MGMT("received UNKNOWN (%d)\n",
+ WLAN_FC_GET_STYPE(header->frame_ctl));
+ IEEE80211_WARNING("%s: Unknown management packet: %d\n",
+ ieee->dev->name,
+ WLAN_FC_GET_STYPE(header->frame_ctl));
+ break;
+ }
+}
+
+
+EXPORT_SYMBOL(ieee80211_rx_mgt);
+EXPORT_SYMBOL(ieee80211_rx);
--- /dev/null
+/******************************************************************************
+
+ Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+#include <linux/compiler.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/wireless.h>
+#include <linux/etherdevice.h>
+#include <asm/uaccess.h>
+
+#include <net/ieee80211.h>
+
+
+/*
+
+
+802.11 Data Frame
+
+ ,-------------------------------------------------------------------.
+Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | Frame | fcs |
+ | | tion | (BSSID) | | | ence | data | |
+ `--------------------------------------------------| |------'
+Total: 28 non-data bytes `----.----'
+ |
+ .- 'Frame data' expands to <---------------------------'
+ |
+ V
+ ,---------------------------------------------------.
+Bytes | 1 | 1 | 1 | 3 | 2 | 0-2304 |
+ |------|------|---------|----------|------|---------|
+Desc. | SNAP | SNAP | Control |Eth Tunnel| Type | IP |
+ | DSAP | SSAP | | | | Packet |
+ | 0xAA | 0xAA |0x03 (UI)|0x00-00-F8| | |
+ `-----------------------------------------| |
+Total: 8 non-data bytes `----.----'
+ |
+ .- 'IP Packet' expands, if WEP enabled, to <--'
+ |
+ V
+ ,-----------------------.
+Bytes | 4 | 0-2296 | 4 |
+ |-----|-----------|-----|
+Desc. | IV | Encrypted | ICV |
+ | | IP Packet | |
+ `-----------------------'
+Total: 8 non-data bytes
+
+
+802.3 Ethernet Data Frame
+
+ ,-----------------------------------------.
+Bytes | 6 | 6 | 2 | Variable | 4 |
+ |-------|-------|------|-----------|------|
+Desc. | Dest. | Source| Type | IP Packet | fcs |
+ | MAC | MAC | | | |
+ `-----------------------------------------'
+Total: 18 non-data bytes
+
+In the event that fragmentation is required, the incoming payload is split into
+N parts of size ieee->fts. The first fragment contains the SNAP header and the
+remaining packets are just data.
+
+If encryption is enabled, each fragment payload size is reduced by enough space
+to add the prefix and postfix (IV and ICV totalling 8 bytes in the case of WEP)
+So if you have 1500 bytes of payload with ieee->fts set to 500 without
+encryption it will take 3 frames. With WEP it will take 4 frames as the
+payload of each frame is reduced to 492 bytes.
+
+* SKB visualization
+*
+* ,- skb->data
+* |
+* | ETHERNET HEADER ,-<-- PAYLOAD
+* | | 14 bytes from skb->data
+* | 2 bytes for Type --> ,T. | (sizeof ethhdr)
+* | | | |
+* |,-Dest.--. ,--Src.---. | | |
+* | 6 bytes| | 6 bytes | | | |
+* v | | | | | |
+* 0 | v 1 | v | v 2
+* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+* ^ | ^ | ^ |
+* | | | | | |
+* | | | | `T' <---- 2 bytes for Type
+* | | | |
+* | | '---SNAP--' <-------- 6 bytes for SNAP
+* | |
+* `-IV--' <-------------------- 4 bytes for IV (WEP)
+*
+* SNAP HEADER
+*
+*/
+
+static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 };
+static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 };
+
+static inline int ieee80211_put_snap(u8 *data, u16 h_proto)
+{
+ struct ieee80211_snap_hdr *snap;
+ u8 *oui;
+
+ snap = (struct ieee80211_snap_hdr *)data;
+ snap->dsap = 0xaa;
+ snap->ssap = 0xaa;
+ snap->ctrl = 0x03;
+
+ if (h_proto == 0x8137 || h_proto == 0x80f3)
+ oui = P802_1H_OUI;
+ else
+ oui = RFC1042_OUI;
+ snap->oui[0] = oui[0];
+ snap->oui[1] = oui[1];
+ snap->oui[2] = oui[2];
+
+ *(u16 *)(data + SNAP_SIZE) = htons(h_proto);
+
+ return SNAP_SIZE + sizeof(u16);
+}
+
+static inline int ieee80211_encrypt_fragment(
+ struct ieee80211_device *ieee,
+ struct sk_buff *frag,
+ int hdr_len)
+{
+ struct ieee80211_crypt_data* crypt = ieee->crypt[ieee->tx_keyidx];
+ int res;
+
+#ifdef CONFIG_IEEE80211_CRYPT_TKIP
+ struct ieee80211_hdr *header;
+
+ if (ieee->tkip_countermeasures &&
+ crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) {
+ header = (struct ieee80211_hdr *) frag->data;
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
+ "TX packet to " MAC_FMT "\n",
+ ieee->dev->name, MAC_ARG(header->addr1));
+ }
+ return -1;
+ }
+#endif
+ /* To encrypt, frame format is:
+ * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */
+
+ // PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption.
+ /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
+ * call both MSDU and MPDU encryption functions from here. */
+ atomic_inc(&crypt->refcnt);
+ res = 0;
+ if (crypt->ops->encrypt_msdu)
+ res = crypt->ops->encrypt_msdu(frag, hdr_len, crypt->priv);
+ if (res == 0 && crypt->ops->encrypt_mpdu)
+ res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv);
+
+ atomic_dec(&crypt->refcnt);
+ if (res < 0) {
+ printk(KERN_INFO "%s: Encryption failed: len=%d.\n",
+ ieee->dev->name, frag->len);
+ ieee->ieee_stats.tx_discards++;
+ return -1;
+ }
+
+ return 0;
+}
+
+
+void ieee80211_txb_free(struct ieee80211_txb *txb) {
+ int i;
+ if (unlikely(!txb))
+ return;
+ for (i = 0; i < txb->nr_frags; i++)
+ if (txb->fragments[i])
+ dev_kfree_skb_any(txb->fragments[i]);
+ kfree(txb);
+}
+
+static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
+ int gfp_mask)
+{
+ struct ieee80211_txb *txb;
+ int i;
+ txb = kmalloc(
+ sizeof(struct ieee80211_txb) + (sizeof(u8*) * nr_frags),
+ gfp_mask);
+ if (!txb)
+ return NULL;
+
+ memset(txb, 0, sizeof(struct ieee80211_txb));
+ txb->nr_frags = nr_frags;
+ txb->frag_size = txb_size;
+
+ for (i = 0; i < nr_frags; i++) {
+ txb->fragments[i] = dev_alloc_skb(txb_size);
+ if (unlikely(!txb->fragments[i])) {
+ i--;
+ break;
+ }
+ }
+ if (unlikely(i != nr_frags)) {
+ while (i >= 0)
+ dev_kfree_skb_any(txb->fragments[i--]);
+ kfree(txb);
+ return NULL;
+ }
+ return txb;
+}
+
+/* SKBs are added to the ieee->tx_queue. */
+int ieee80211_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct ieee80211_device *ieee = netdev_priv(dev);
+ struct ieee80211_txb *txb = NULL;
+ struct ieee80211_hdr *frag_hdr;
+ int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size;
+ unsigned long flags;
+ struct net_device_stats *stats = &ieee->stats;
+ int ether_type, encrypt;
+ int bytes, fc, hdr_len;
+ struct sk_buff *skb_frag;
+ struct ieee80211_hdr header = { /* Ensure zero initialized */
+ .duration_id = 0,
+ .seq_ctl = 0
+ };
+ u8 dest[ETH_ALEN], src[ETH_ALEN];
+
+ struct ieee80211_crypt_data* crypt;
+
+ spin_lock_irqsave(&ieee->lock, flags);
+
+ /* If there is no driver handler to take the TXB, dont' bother
+ * creating it... */
+ if (!ieee->hard_start_xmit) {
+ printk(KERN_WARNING "%s: No xmit handler.\n",
+ ieee->dev->name);
+ goto success;
+ }
+
+ if (unlikely(skb->len < SNAP_SIZE + sizeof(u16))) {
+ printk(KERN_WARNING "%s: skb too small (%d).\n",
+ ieee->dev->name, skb->len);
+ goto success;
+ }
+
+ ether_type = ntohs(((struct ethhdr *)skb->data)->h_proto);
+
+ crypt = ieee->crypt[ieee->tx_keyidx];
+
+ encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) &&
+ ieee->host_encrypt && crypt && crypt->ops;
+
+ if (!encrypt && ieee->ieee802_1x &&
+ ieee->drop_unencrypted && ether_type != ETH_P_PAE) {
+ stats->tx_dropped++;
+ goto success;
+ }
+
+#ifdef CONFIG_IEEE80211_DEBUG
+ if (crypt && !encrypt && ether_type == ETH_P_PAE) {
+ struct eapol *eap = (struct eapol *)(skb->data +
+ sizeof(struct ethhdr) - SNAP_SIZE - sizeof(u16));
+ IEEE80211_DEBUG_EAP("TX: IEEE 802.11 EAPOL frame: %s\n",
+ eap_get_type(eap->type));
+ }
+#endif
+
+ /* Save source and destination addresses */
+ memcpy(&dest, skb->data, ETH_ALEN);
+ memcpy(&src, skb->data+ETH_ALEN, ETH_ALEN);
+
+ /* Advance the SKB to the start of the payload */
+ skb_pull(skb, sizeof(struct ethhdr));
+
+ /* Determine total amount of storage required for TXB packets */
+ bytes = skb->len + SNAP_SIZE + sizeof(u16);
+
+ if (encrypt)
+ fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA |
+ IEEE80211_FCTL_WEP;
+ else
+ fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA;
+
+ if (ieee->iw_mode == IW_MODE_INFRA) {
+ fc |= IEEE80211_FCTL_TODS;
+ /* To DS: Addr1 = BSSID, Addr2 = SA,
+ Addr3 = DA */
+ memcpy(&header.addr1, ieee->bssid, ETH_ALEN);
+ memcpy(&header.addr2, &src, ETH_ALEN);
+ memcpy(&header.addr3, &dest, ETH_ALEN);
+ } else if (ieee->iw_mode == IW_MODE_ADHOC) {
+ /* not From/To DS: Addr1 = DA, Addr2 = SA,
+ Addr3 = BSSID */
+ memcpy(&header.addr1, dest, ETH_ALEN);
+ memcpy(&header.addr2, src, ETH_ALEN);
+ memcpy(&header.addr3, ieee->bssid, ETH_ALEN);
+ }
+ header.frame_ctl = cpu_to_le16(fc);
+ hdr_len = IEEE80211_3ADDR_LEN;
+
+ /* Determine fragmentation size based on destination (multicast
+ * and broadcast are not fragmented) */
+ if (is_multicast_ether_addr(dest) ||
+ is_broadcast_ether_addr(dest))
+ frag_size = MAX_FRAG_THRESHOLD;
+ else
+ frag_size = ieee->fts;
+
+ /* Determine amount of payload per fragment. Regardless of if
+ * this stack is providing the full 802.11 header, one will
+ * eventually be affixed to this fragment -- so we must account for
+ * it when determining the amount of payload space. */
+ bytes_per_frag = frag_size - IEEE80211_3ADDR_LEN;
+ if (ieee->config &
+ (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+ bytes_per_frag -= IEEE80211_FCS_LEN;
+
+ /* Each fragment may need to have room for encryptiong pre/postfix */
+ if (encrypt)
+ bytes_per_frag -= crypt->ops->extra_prefix_len +
+ crypt->ops->extra_postfix_len;
+
+ /* Number of fragments is the total bytes_per_frag /
+ * payload_per_fragment */
+ nr_frags = bytes / bytes_per_frag;
+ bytes_last_frag = bytes % bytes_per_frag;
+ if (bytes_last_frag)
+ nr_frags++;
+ else
+ bytes_last_frag = bytes_per_frag;
+
+ /* When we allocate the TXB we allocate enough space for the reserve
+ * and full fragment bytes (bytes_per_frag doesn't include prefix,
+ * postfix, header, FCS, etc.) */
+ txb = ieee80211_alloc_txb(nr_frags, frag_size, GFP_ATOMIC);
+ if (unlikely(!txb)) {
+ printk(KERN_WARNING "%s: Could not allocate TXB\n",
+ ieee->dev->name);
+ goto failed;
+ }
+ txb->encrypted = encrypt;
+ txb->payload_size = bytes;
+
+ for (i = 0; i < nr_frags; i++) {
+ skb_frag = txb->fragments[i];
+
+ if (encrypt)
+ skb_reserve(skb_frag, crypt->ops->extra_prefix_len);
+
+ frag_hdr = (struct ieee80211_hdr *)skb_put(skb_frag, hdr_len);
+ memcpy(frag_hdr, &header, hdr_len);
+
+ /* If this is not the last fragment, then add the MOREFRAGS
+ * bit to the frame control */
+ if (i != nr_frags - 1) {
+ frag_hdr->frame_ctl = cpu_to_le16(
+ fc | IEEE80211_FCTL_MOREFRAGS);
+ bytes = bytes_per_frag;
+ } else {
+ /* The last fragment takes the remaining length */
+ bytes = bytes_last_frag;
+ }
+
+ /* Put a SNAP header on the first fragment */
+ if (i == 0) {
+ ieee80211_put_snap(
+ skb_put(skb_frag, SNAP_SIZE + sizeof(u16)),
+ ether_type);
+ bytes -= SNAP_SIZE + sizeof(u16);
+ }
+
+ memcpy(skb_put(skb_frag, bytes), skb->data, bytes);
+
+ /* Advance the SKB... */
+ skb_pull(skb, bytes);
+
+ /* Encryption routine will move the header forward in order
+ * to insert the IV between the header and the payload */
+ if (encrypt)
+ ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
+ if (ieee->config &
+ (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
+ skb_put(skb_frag, 4);
+ }
+
+
+ success:
+ spin_unlock_irqrestore(&ieee->lock, flags);
+
+ dev_kfree_skb_any(skb);
+
+ if (txb) {
+ if ((*ieee->hard_start_xmit)(txb, dev) == 0) {
+ stats->tx_packets++;
+ stats->tx_bytes += txb->payload_size;
+ return 0;
+ }
+ ieee80211_txb_free(txb);
+ }
+
+ return 0;
+
+ failed:
+ spin_unlock_irqrestore(&ieee->lock, flags);
+ netif_stop_queue(dev);
+ stats->tx_errors++;
+ return 1;
+
+}
+
+EXPORT_SYMBOL(ieee80211_txb_free);
--- /dev/null
+/******************************************************************************
+
+ Copyright(c) 2004 Intel Corporation. All rights reserved.
+
+ Portions of this file are based on the WEP enablement code provided by the
+ Host AP project hostap-drivers v0.1.3
+ Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ <jkmaline@cc.hut.fi>
+ Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+#include <linux/wireless.h>
+#include <linux/version.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+
+#include <net/ieee80211.h>
+static const char *ieee80211_modes[] = {
+ "?", "a", "b", "ab", "g", "ag", "bg", "abg"
+};
+
+#define MAX_CUSTOM_LEN 64
+static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee,
+ char *start, char *stop,
+ struct ieee80211_network *network)
+{
+ char custom[MAX_CUSTOM_LEN];
+ char *p;
+ struct iw_event iwe;
+ int i, j;
+ u8 max_rate, rate;
+
+ /* First entry *MUST* be the AP MAC address */
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN);
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN);
+
+ /* Remaining entries will be displayed in the order we provide them */
+
+ /* Add the ESSID */
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ if (network->flags & NETWORK_EMPTY_ESSID) {
+ iwe.u.data.length = sizeof("<hidden>");
+ start = iwe_stream_add_point(start, stop, &iwe, "<hidden>");
+ } else {
+ iwe.u.data.length = min(network->ssid_len, (u8)32);
+ start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
+ }
+
+ /* Add the protocol name */
+ iwe.cmd = SIOCGIWNAME;
+ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", ieee80211_modes[network->mode]);
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_CHAR_LEN);
+
+ /* Add mode */
+ iwe.cmd = SIOCGIWMODE;
+ if (network->capability &
+ (WLAN_CAPABILITY_BSS | WLAN_CAPABILITY_IBSS)) {
+ if (network->capability & WLAN_CAPABILITY_BSS)
+ iwe.u.mode = IW_MODE_MASTER;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+
+ start = iwe_stream_add_event(start, stop, &iwe,
+ IW_EV_UINT_LEN);
+ }
+
+ /* Add frequency/channel */
+ iwe.cmd = SIOCGIWFREQ;
+/* iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode);
+ iwe.u.freq.e = 3; */
+ iwe.u.freq.m = network->channel;
+ iwe.u.freq.e = 0;
+ iwe.u.freq.i = 0;
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN);
+
+ /* Add encryption capability */
+ iwe.cmd = SIOCGIWENCODE;
+ if (network->capability & WLAN_CAPABILITY_PRIVACY)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
+
+ /* Add basic and extended rates */
+ max_rate = 0;
+ p = custom;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): ");
+ for (i = 0, j = 0; i < network->rates_len; ) {
+ if (j < network->rates_ex_len &&
+ ((network->rates_ex[j] & 0x7F) <
+ (network->rates[i] & 0x7F)))
+ rate = network->rates_ex[j++] & 0x7F;
+ else
+ rate = network->rates[i++] & 0x7F;
+ if (rate > max_rate)
+ max_rate = rate;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+ "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
+ }
+ for (; j < network->rates_ex_len; j++) {
+ rate = network->rates_ex[j] & 0x7F;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+ "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
+ if (rate > max_rate)
+ max_rate = rate;
+ }
+
+ iwe.cmd = SIOCGIWRATE;
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+ iwe.u.bitrate.value = max_rate * 500000;
+ start = iwe_stream_add_event(start, stop, &iwe,
+ IW_EV_PARAM_LEN);
+
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = p - custom;
+ if (iwe.u.data.length)
+ start = iwe_stream_add_point(start, stop, &iwe, custom);
+
+ /* Add quality statistics */
+ /* TODO: Fix these values... */
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.qual = network->stats.signal;
+ iwe.u.qual.level = network->stats.rssi;
+ iwe.u.qual.noise = network->stats.noise;
+ iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK;
+ if (!(network->stats.mask & IEEE80211_STATMASK_RSSI))
+ iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
+ if (!(network->stats.mask & IEEE80211_STATMASK_NOISE))
+ iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
+ if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
+ iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
+
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN);
+
+ iwe.cmd = IWEVCUSTOM;
+ p = custom;
+
+ iwe.u.data.length = p - custom;
+ if (iwe.u.data.length)
+ start = iwe_stream_add_point(start, stop, &iwe, custom);
+
+ if (ieee->wpa_enabled && network->wpa_ie_len){
+ char buf[MAX_WPA_IE_LEN * 2 + 30];
+
+ u8 *p = buf;
+ p += sprintf(p, "wpa_ie=");
+ for (i = 0; i < network->wpa_ie_len; i++) {
+ p += sprintf(p, "%02x", network->wpa_ie[i]);
+ }
+
+ memset(&iwe, 0, sizeof(iwe));
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = strlen(buf);
+ start = iwe_stream_add_point(start, stop, &iwe, buf);
+ }
+
+ if (ieee->wpa_enabled && network->rsn_ie_len){
+ char buf[MAX_WPA_IE_LEN * 2 + 30];
+
+ u8 *p = buf;
+ p += sprintf(p, "rsn_ie=");
+ for (i = 0; i < network->rsn_ie_len; i++) {
+ p += sprintf(p, "%02x", network->rsn_ie[i]);
+ }
+
+ memset(&iwe, 0, sizeof(iwe));
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = strlen(buf);
+ start = iwe_stream_add_point(start, stop, &iwe, buf);
+ }
+
+ /* Add EXTRA: Age to display seconds since last beacon/probe response
+ * for given network. */
+ iwe.cmd = IWEVCUSTOM;
+ p = custom;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+ " Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
+ iwe.u.data.length = p - custom;
+ if (iwe.u.data.length)
+ start = iwe_stream_add_point(start, stop, &iwe, custom);
+
+
+ return start;
+}
+
+int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ieee80211_network *network;
+ unsigned long flags;
+
+ char *ev = extra;
+ char *stop = ev + IW_SCAN_MAX_DATA;
+ int i = 0;
+
+ IEEE80211_DEBUG_WX("Getting scan\n");
+
+ spin_lock_irqsave(&ieee->lock, flags);
+
+ list_for_each_entry(network, &ieee->network_list, list) {
+ i++;
+ if (ieee->scan_age == 0 ||
+ time_after(network->last_scanned + ieee->scan_age, jiffies))
+ ev = ipw2100_translate_scan(ieee, ev, stop, network);
+ else
+ IEEE80211_DEBUG_SCAN(
+ "Not showing network '%s ("
+ MAC_FMT ")' due to age (%lums).\n",
+ escape_essid(network->ssid,
+ network->ssid_len),
+ MAC_ARG(network->bssid),
+ (jiffies - network->last_scanned) / (HZ / 100));
+ }
+
+ spin_unlock_irqrestore(&ieee->lock, flags);
+
+ wrqu->data.length = ev - extra;
+ wrqu->data.flags = 0;
+
+ IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
+
+ return 0;
+}
+
+int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *keybuf)
+{
+ struct iw_point *erq = &(wrqu->encoding);
+ struct net_device *dev = ieee->dev;
+ struct ieee80211_security sec = {
+ .flags = 0
+ };
+ int i, key, key_provided, len;
+ struct ieee80211_crypt_data **crypt;
+
+ IEEE80211_DEBUG_WX("SET_ENCODE\n");
+
+ key = erq->flags & IW_ENCODE_INDEX;
+ if (key) {
+ if (key > WEP_KEYS)
+ return -EINVAL;
+ key--;
+ key_provided = 1;
+ } else {
+ key_provided = 0;
+ key = ieee->tx_keyidx;
+ }
+
+ IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ?
+ "provided" : "default");
+
+ crypt = &ieee->crypt[key];
+
+ if (erq->flags & IW_ENCODE_DISABLED) {
+ if (key_provided && *crypt) {
+ IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n",
+ key);
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+ } else
+ IEEE80211_DEBUG_WX("Disabling encryption.\n");
+
+ /* Check all the keys to see if any are still configured,
+ * and if no key index was provided, de-init them all */
+ for (i = 0; i < WEP_KEYS; i++) {
+ if (ieee->crypt[i] != NULL) {
+ if (key_provided)
+ break;
+ ieee80211_crypt_delayed_deinit(
+ ieee, &ieee->crypt[i]);
+ }
+ }
+
+ if (i == WEP_KEYS) {
+ sec.enabled = 0;
+ sec.level = SEC_LEVEL_0;
+ sec.flags |= SEC_ENABLED | SEC_LEVEL;
+ }
+
+ goto done;
+ }
+
+
+
+ sec.enabled = 1;
+ sec.flags |= SEC_ENABLED;
+
+ if (*crypt != NULL && (*crypt)->ops != NULL &&
+ strcmp((*crypt)->ops->name, "WEP") != 0) {
+ /* changing to use WEP; deinit previously used algorithm
+ * on this key */
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+ }
+
+ if (*crypt == NULL) {
+ struct ieee80211_crypt_data *new_crypt;
+
+ /* take WEP into use */
+ new_crypt = kmalloc(sizeof(struct ieee80211_crypt_data),
+ GFP_KERNEL);
+ if (new_crypt == NULL)
+ return -ENOMEM;
+ memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
+ new_crypt->ops = ieee80211_get_crypto_ops("WEP");
+ if (!new_crypt->ops) {
+ request_module("ieee80211_crypt_wep");
+ new_crypt->ops = ieee80211_get_crypto_ops("WEP");
+ }
+
+ if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ new_crypt->priv = new_crypt->ops->init(key);
+
+ if (!new_crypt->ops || !new_crypt->priv) {
+ kfree(new_crypt);
+ new_crypt = NULL;
+
+ printk(KERN_WARNING "%s: could not initialize WEP: "
+ "load module ieee80211_crypt_wep\n",
+ dev->name);
+ return -EOPNOTSUPP;
+ }
+ *crypt = new_crypt;
+ }
+
+ /* If a new key was provided, set it up */
+ if (erq->length > 0) {
+ len = erq->length <= 5 ? 5 : 13;
+ memcpy(sec.keys[key], keybuf, erq->length);
+ if (len > erq->length)
+ memset(sec.keys[key] + erq->length, 0,
+ len - erq->length);
+ IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
+ key, escape_essid(sec.keys[key], len),
+ erq->length, len);
+ sec.key_sizes[key] = len;
+ (*crypt)->ops->set_key(sec.keys[key], len, NULL,
+ (*crypt)->priv);
+ sec.flags |= (1 << key);
+ /* This ensures a key will be activated if no key is
+ * explicitely set */
+ if (key == sec.active_key)
+ sec.flags |= SEC_ACTIVE_KEY;
+ } else {
+ len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
+ NULL, (*crypt)->priv);
+ if (len == 0) {
+ /* Set a default key of all 0 */
+ IEEE80211_DEBUG_WX("Setting key %d to all zero.\n",
+ key);
+ memset(sec.keys[key], 0, 13);
+ (*crypt)->ops->set_key(sec.keys[key], 13, NULL,
+ (*crypt)->priv);
+ sec.key_sizes[key] = 13;
+ sec.flags |= (1 << key);
+ }
+
+ /* No key data - just set the default TX key index */
+ if (key_provided) {
+ IEEE80211_DEBUG_WX(
+ "Setting key %d to default Tx key.\n", key);
+ ieee->tx_keyidx = key;
+ sec.active_key = key;
+ sec.flags |= SEC_ACTIVE_KEY;
+ }
+ }
+
+ done:
+ ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
+ sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
+ sec.flags |= SEC_AUTH_MODE;
+ IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ?
+ "OPEN" : "SHARED KEY");
+
+ /* For now we just support WEP, so only set that security level...
+ * TODO: When WPA is added this is one place that needs to change */
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
+
+ if (ieee->set_security)
+ ieee->set_security(dev, &sec);
+
+ /* Do not reset port if card is in Managed mode since resetting will
+ * generate new IEEE 802.11 authentication which may end up in looping
+ * with IEEE 802.1X. If your hardware requires a reset after WEP
+ * configuration (for example... Prism2), implement the reset_port in
+ * the callbacks structures used to initialize the 802.11 stack. */
+ if (ieee->reset_on_keychange &&
+ ieee->iw_mode != IW_MODE_INFRA &&
+ ieee->reset_port && ieee->reset_port(dev)) {
+ printk(KERN_DEBUG "%s: reset_port failed\n", dev->name);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *keybuf)
+{
+ struct iw_point *erq = &(wrqu->encoding);
+ int len, key;
+ struct ieee80211_crypt_data *crypt;
+
+ IEEE80211_DEBUG_WX("GET_ENCODE\n");
+
+ key = erq->flags & IW_ENCODE_INDEX;
+ if (key) {
+ if (key > WEP_KEYS)
+ return -EINVAL;
+ key--;
+ } else
+ key = ieee->tx_keyidx;
+
+ crypt = ieee->crypt[key];
+ erq->flags = key + 1;
+
+ if (crypt == NULL || crypt->ops == NULL) {
+ erq->length = 0;
+ erq->flags |= IW_ENCODE_DISABLED;
+ return 0;
+ }
+
+ if (strcmp(crypt->ops->name, "WEP") != 0) {
+ /* only WEP is supported with wireless extensions, so just
+ * report that encryption is used */
+ erq->length = 0;
+ erq->flags |= IW_ENCODE_ENABLED;
+ return 0;
+ }
+
+ len = crypt->ops->get_key(keybuf, WEP_KEY_LEN, NULL, crypt->priv);
+ erq->length = (len >= 0 ? len : 0);
+
+ erq->flags |= IW_ENCODE_ENABLED;
+
+ if (ieee->open_wep)
+ erq->flags |= IW_ENCODE_OPEN;
+ else
+ erq->flags |= IW_ENCODE_RESTRICTED;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(ieee80211_wx_get_scan);
+EXPORT_SYMBOL(ieee80211_wx_set_encode);
+EXPORT_SYMBOL(ieee80211_wx_get_encode);