drm/i915/icl: Program TRANS_DDI_FUNC_CTL registers
authorMadhav Chauhan <madhav.chauhan@intel.com>
Mon, 15 Oct 2018 14:28:01 +0000 (17:28 +0300)
committerJani Nikula <jani.nikula@intel.com>
Mon, 22 Oct 2018 12:14:19 +0000 (15:14 +0300)
This patch select input PIPE for DSI, data lanes width,
enable port sync mode and wait for DSI link to become ready.

v2 by Jani:
 - Use MISSING_CASE with fallthrough instead of DRM_ERROR
 - minor stylistic changes

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/080320dc9a9e321dbe73567c6a7aa1dcff0f21c2.1539613303.git.jani.nikula@intel.com
drivers/gpu/drm/i915/icl_dsi.c

index 756c75d..87d5e64 100644 (file)
@@ -340,10 +340,14 @@ static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
        }
 }
 
-static void gen11_dsi_configure_transcoder(struct intel_encoder *encoder)
+static void
+gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
+                              const struct intel_crtc_state *pipe_config)
 {
        struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
        struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+       struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
+       enum pipe pipe = intel_crtc->pipe;
        u32 tmp;
        enum port port;
        enum transcoder dsi_trans;
@@ -420,9 +424,61 @@ static void gen11_dsi_configure_transcoder(struct intel_encoder *encoder)
 
                I915_WRITE(DSI_TRANS_FUNC_CONF(dsi_trans), tmp);
        }
+
+       /* enable port sync mode if dual link */
+       if (intel_dsi->dual_link) {
+               for_each_dsi_port(port, intel_dsi->ports) {
+                       dsi_trans = dsi_port_to_transcoder(port);
+                       tmp = I915_READ(TRANS_DDI_FUNC_CTL2(dsi_trans));
+                       tmp |= PORT_SYNC_MODE_ENABLE;
+                       I915_WRITE(TRANS_DDI_FUNC_CTL2(dsi_trans), tmp);
+               }
+
+               //TODO: configure DSS_CTL1
+       }
+
+       for_each_dsi_port(port, intel_dsi->ports) {
+               dsi_trans = dsi_port_to_transcoder(port);
+
+               /* select data lane width */
+               tmp = I915_READ(TRANS_DDI_FUNC_CTL(dsi_trans));
+               tmp &= ~DDI_PORT_WIDTH_MASK;
+               tmp |= DDI_PORT_WIDTH(intel_dsi->lane_count);
+
+               /* select input pipe */
+               tmp &= ~TRANS_DDI_EDP_INPUT_MASK;
+               switch (pipe) {
+               default:
+                       MISSING_CASE(pipe);
+                       /* fallthrough */
+               case PIPE_A:
+                       tmp |= TRANS_DDI_EDP_INPUT_A_ON;
+                       break;
+               case PIPE_B:
+                       tmp |= TRANS_DDI_EDP_INPUT_B_ONOFF;
+                       break;
+               case PIPE_C:
+                       tmp |= TRANS_DDI_EDP_INPUT_C_ONOFF;
+                       break;
+               }
+
+               /* enable DDI buffer */
+               tmp |= TRANS_DDI_FUNC_ENABLE;
+               I915_WRITE(TRANS_DDI_FUNC_CTL(dsi_trans), tmp);
+       }
+
+       /* wait for link ready */
+       for_each_dsi_port(port, intel_dsi->ports) {
+               dsi_trans = dsi_port_to_transcoder(port);
+               if (wait_for_us((I915_READ(DSI_TRANS_FUNC_CONF(dsi_trans)) &
+                               LINK_READY), 2500))
+                       DRM_ERROR("DSI link not ready\n");
+       }
 }
 
-static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
+static void
+gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
+                             const struct intel_crtc_state *pipe_config)
 {
        /* step 4a: power up all lanes of the DDI used by DSI */
        gen11_dsi_power_up_lanes(encoder);
@@ -440,7 +496,7 @@ static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
        gen11_dsi_setup_dphy_timings(encoder);
 
        /* Step (4h, 4i, 4j, 4k): Configure transcoder */
-       gen11_dsi_configure_transcoder(encoder);
+       gen11_dsi_configure_transcoder(encoder, pipe_config);
 }
 
 static void __attribute__((unused))
@@ -455,5 +511,5 @@ gen11_dsi_pre_enable(struct intel_encoder *encoder,
        gen11_dsi_program_esc_clk_div(encoder);
 
        /* step4: enable DSI port and DPHY */
-       gen11_dsi_enable_port_and_phy(encoder);
+       gen11_dsi_enable_port_and_phy(encoder, pipe_config);
 }