regulator: da903x: Convert to regulator_list_voltage_linear()

Use regulator_list_voltage_linear() to replace da903x_list_voltage().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index c75e7b7..3a0d080 100644 (file)
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -76,9 +76,7 @@
 struct da903x_regulator_info {
        struct regulator_desc desc;
 
-       int     min_uV;
        int     max_uV;
-       int     step_uV;
        int     vol_reg;
        int     vol_shift;
        int     vol_nbits;
@@ -96,7 +94,7 @@ static inline struct device *to_da903x_dev(struct regulator_dev *rdev)
 static inline int check_range(struct da903x_regulator_info *info,
                                int min_uV, int max_uV)
 {
-       if (min_uV < info->min_uV || min_uV > info->max_uV)
+       if (min_uV < info->desc.min_uV || min_uV > info->max_uV)
                return -EINVAL;
 
        return 0;
@@ -115,7 +113,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev,
                return -EINVAL;
        }
 
-       val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
+       val = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step);
        *selector = val;
        val <<= info->vol_shift;
        mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
@@ -172,17 +170,6 @@ static int da903x_is_enabled(struct regulator_dev *rdev)
        return !!(reg_val & (1 << info->enable_bit));
 }
 
-static int da903x_list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
-       struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-       int ret;
-
-       ret = info->min_uV + info->step_uV * selector;
-       if (ret > info->max_uV)
-               return -EINVAL;
-       return ret;
-}
-
 /* DA9030 specific operations */
 static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
                                      int min_uV, int max_uV,
@@ -198,7 +185,7 @@ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
                return -EINVAL;
        }
 
-       val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
+       val = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step);
        *selector = val;
        val <<= info->vol_shift;
        mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
@@ -227,12 +214,12 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev,
                return -EINVAL;
        }
 
-       thresh = (info->max_uV + info->min_uV) / 2;
+       thresh = (info->max_uV + info->desc.min_uV) / 2;
        if (min_uV < thresh) {
-               val = DIV_ROUND_UP(thresh - min_uV, info->step_uV);
+               val = DIV_ROUND_UP(thresh - min_uV, info->desc.uV_step);
                val |= 0x4;
        } else {
-               val = DIV_ROUND_UP(min_uV - thresh, info->step_uV);
+               val = DIV_ROUND_UP(min_uV - thresh, info->desc.uV_step);
        }
 
        *selector = val;
@@ -266,10 +253,11 @@ static int da9030_list_ldo14_voltage(struct regulator_dev *rdev,
        int volt;
 
        if (selector & 0x4)
-               volt = info->min_uV + info->step_uV * (3 - (selector & ~0x4));
+               volt = rdev->desc->min_uV +
+                      rdev->desc->uV_step * (3 - (selector & ~0x4));
        else
-               volt = (info->max_uV + info->min_uV) / 2 +
-                      info->step_uV * (selector & ~0x4);
+               volt = (info->max_uV + rdev->desc->min_uV) / 2 +
+                      rdev->desc->uV_step * (selector & ~0x4);
 
        if (volt > info->max_uV)
                return -EINVAL;
@@ -291,7 +279,7 @@ static int da9034_set_dvc_voltage(struct regulator_dev *rdev,
                return -EINVAL;
        }
 
-       val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
+       val = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step);
        *selector = val;
        val <<= info->vol_shift;
        mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
@@ -317,7 +305,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev,
                return -EINVAL;
        }
 
-       val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
+       val = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step);
        val = (val >= 20) ? val - 12 : ((val > 7) ? 8 : val);
        *selector = val;
        val <<= info->vol_shift;
@@ -350,9 +338,9 @@ static int da9034_list_ldo12_voltage(struct regulator_dev *rdev,
        int volt;
 
        if (selector >= 8)
-               volt = 2700000 + info->step_uV * (selector - 8);
+               volt = 2700000 + rdev->desc->uV_step * (selector - 8);
        else
-               volt = info->min_uV + info->step_uV * selector;
+               volt = rdev->desc->min_uV + rdev->desc->uV_step * selector;
 
        if (volt > info->max_uV)
                return -EINVAL;
@@ -363,7 +351,7 @@ static int da9034_list_ldo12_voltage(struct regulator_dev *rdev,
 static struct regulator_ops da903x_regulator_ldo_ops = {
        .set_voltage    = da903x_set_ldo_voltage,
        .get_voltage_sel = da903x_get_voltage_sel,
-       .list_voltage   = da903x_list_voltage,
+       .list_voltage   = regulator_list_voltage_linear,
        .enable         = da903x_enable,
        .disable        = da903x_disable,
        .is_enabled     = da903x_is_enabled,
@@ -383,7 +371,7 @@ static struct regulator_ops da9030_regulator_ldo14_ops = {
 static struct regulator_ops da9030_regulator_ldo1_15_ops = {
        .set_voltage    = da9030_set_ldo1_15_voltage,
        .get_voltage_sel = da903x_get_voltage_sel,
-       .list_voltage   = da903x_list_voltage,
+       .list_voltage   = regulator_list_voltage_linear,
        .enable         = da903x_enable,
        .disable        = da903x_disable,
        .is_enabled     = da903x_is_enabled,
@@ -392,7 +380,7 @@ static struct regulator_ops da9030_regulator_ldo1_15_ops = {
 static struct regulator_ops da9034_regulator_dvc_ops = {
        .set_voltage    = da9034_set_dvc_voltage,
        .get_voltage_sel = da903x_get_voltage_sel,
-       .list_voltage   = da903x_list_voltage,
+       .list_voltage   = regulator_list_voltage_linear,
        .enable         = da903x_enable,
        .disable        = da903x_disable,
        .is_enabled     = da903x_is_enabled,
@@ -417,10 +405,10 @@ static struct regulator_ops da9034_regulator_ldo12_ops = {
                .id     = _pmic##_ID_LDO##_id,                          \
                .n_voltages = (step) ? ((max - min) / step + 1) : 1,    \
                .owner  = THIS_MODULE,                                  \
+               .min_uV  = (min) * 1000,                                \
+               .uV_step = (step) * 1000,                               \
        },                                                              \
-       .min_uV         = (min) * 1000,                                 \
        .max_uV         = (max) * 1000,                                 \
-       .step_uV        = (step) * 1000,                                \
        .vol_reg        = _pmic##_##vreg,                               \
        .vol_shift      = (shift),                                      \
        .vol_nbits      = (nbits),                                      \
@@ -437,10 +425,10 @@ static struct regulator_ops da9034_regulator_ldo12_ops = {
                .id     = _pmic##_ID_##_id,                             \
                .n_voltages = (step) ? ((max - min) / step + 1) : 1,    \
                .owner  = THIS_MODULE,                                  \
+               .min_uV = (min) * 1000,                                 \
+               .uV_step = (step) * 1000,                               \
        },                                                              \
-       .min_uV         = (min) * 1000,                                 \
        .max_uV         = (max) * 1000,                                 \
-       .step_uV        = (step) * 1000,                                \
        .vol_reg        = _pmic##_##vreg,                               \
        .vol_shift      = (0),                                          \
        .vol_nbits      = (nbits),                                      \