* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
Input: synaptics - fix reporting of min coordinates
Input: tegra-kbc - enable key autorepeat
Input: kxtj9 - fix locking typo in kxtj9_set_poll()
Input: kxtj9 - fix bug in probe()
Input: intel-mid-touch - remove pointless checking for variable 'found'
Input: hp_sdc - staticize hp_sdc_kicker()
Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure
Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data
Input: cy8ctmg110_ts - constify i2c_device_id table
Input: cy8ctmg110_ts - fix checking return value of i2c_master_send
Input: lifebook - make dmi callback functions return 1
Input: atkbd - make dmi callback functions return 1
Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS
Input: gpio_keys - add support for device-tree platform data
Input: aiptek - remove double define
Input: synaptics - set minimum coordinates as reported by firmware
Input: synaptics - process button bits in AGM packets
Input: synaptics - rename set_slot to be more descriptive
Input: synaptics - fuzz position for touchpad with reduced filtering
Input: synaptics - set resolution for MT_POSITION_X/Y axes
...
--- /dev/null
+Device-Tree bindings for input/gpio_keys.c keyboard driver
+
+Required properties:
+ - compatible = "gpio-keys";
+
+Optional properties:
+ - autorepeat: Boolean, Enable auto repeat feature of Linux input
+ subsystem.
+
+Each button (key) is represented as a sub-node of "gpio-keys":
+Subnode properties:
+
+ - gpios: OF devcie-tree gpio specificatin.
+ - label: Descriptive name of the key.
+ - linux,code: Keycode to emit.
+
+Optional subnode-properties:
+ - linux,input-type: Specify event type this button/key generates.
+ If not specified defaults to <1> == EV_KEY.
+ - debounce-interval: Debouncing interval time in milliseconds.
+ If not specified defaults to 5.
+ - gpio-key,wakeup: Boolean, button can wake-up the system.
+
+Example nodes:
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button@21 {
+ label = "GPIO Key UP";
+ linux,code = <103>;
+ gpios = <&gpio1 0 1>;
+ };
+ ...
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
+ XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
- XPAD_XBOX360_VENDOR(0x1bad), /* Rock Band Drums */
+ XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
{ }
};
struct usb_endpoint_descriptor *ep_irq_out;
int error;
- if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
+ if (xpad->xtype == XTYPE_UNKNOWN)
return 0;
xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
static void xpad_stop_output(struct usb_xpad *xpad)
{
- if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX)
+ if (xpad->xtype != XTYPE_UNKNOWN)
usb_kill_urb(xpad->irq_out);
}
static void xpad_deinit_output(struct usb_xpad *xpad)
{
- if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX) {
+ if (xpad->xtype != XTYPE_UNKNOWN) {
usb_free_urb(xpad->irq_out);
usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
xpad->odata, xpad->odata_dma);
return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+ case XTYPE_XBOX360W:
+ xpad->odata[0] = 0x00;
+ xpad->odata[1] = 0x01;
+ xpad->odata[2] = 0x0F;
+ xpad->odata[3] = 0xC0;
+ xpad->odata[4] = 0x00;
+ xpad->odata[5] = strong / 256;
+ xpad->odata[6] = weak / 256;
+ xpad->odata[7] = 0x00;
+ xpad->odata[8] = 0x00;
+ xpad->odata[9] = 0x00;
+ xpad->odata[10] = 0x00;
+ xpad->odata[11] = 0x00;
+ xpad->irq_out->transfer_buffer_length = 12;
+
+ return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+
default:
dbg("%s - rumble command sent to unsupported xpad type: %d",
__func__, xpad->xtype);
static int xpad_init_ff(struct usb_xpad *xpad)
{
- if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
+ if (xpad->xtype == XTYPE_UNKNOWN)
return 0;
input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
atkbd_platform_fixup = atkbd_apply_forced_release_keylist;
atkbd_platform_fixup_data = id->driver_data;
- return 0;
+ return 1;
}
static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
{
atkbd_platform_scancode_fixup = id->driver_data;
- return 0;
+ return 1;
}
static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
* Driver for keys on GPIO lines capable of generating interrupts.
*
* Copyright 2005 Phil Blundell
+ * Copyright 2010, 2011 David Jander <david@protonic.nl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
struct gpio_button_data {
struct gpio_keys_button *button;
if (!button->can_disable)
irqflags |= IRQF_SHARED;
- error = request_any_context_irq(irq, gpio_keys_isr, irqflags, desc, bdata);
+ error = request_threaded_irq(irq, NULL, gpio_keys_isr, irqflags, desc, bdata);
if (error < 0) {
dev_err(dev, "Unable to claim irq %d; error %d\n",
irq, error);
ddata->disable(input->dev.parent);
}
+/*
+ * Handlers for alternative sources of platform_data
+ */
+#ifdef CONFIG_OF
+/*
+ * Translate OpenFirmware node properties into platform_data
+ */
+static int gpio_keys_get_devtree_pdata(struct device *dev,
+ struct gpio_keys_platform_data *pdata)
+{
+ struct device_node *node, *pp;
+ int i;
+ struct gpio_keys_button *buttons;
+ const u32 *reg;
+ int len;
+
+ node = dev->of_node;
+ if (node == NULL)
+ return -ENODEV;
+
+ memset(pdata, 0, sizeof *pdata);
+
+ pdata->rep = !!of_get_property(node, "autorepeat", &len);
+
+ /* First count the subnodes */
+ pdata->nbuttons = 0;
+ pp = NULL;
+ while ((pp = of_get_next_child(node, pp)))
+ pdata->nbuttons++;
+
+ if (pdata->nbuttons == 0)
+ return -ENODEV;
+
+ buttons = kzalloc(pdata->nbuttons * (sizeof *buttons), GFP_KERNEL);
+ if (!buttons)
+ return -ENODEV;
+
+ pp = NULL;
+ i = 0;
+ while ((pp = of_get_next_child(node, pp))) {
+ enum of_gpio_flags flags;
+
+ if (!of_find_property(pp, "gpios", NULL)) {
+ pdata->nbuttons--;
+ dev_warn(dev, "Found button without gpios\n");
+ continue;
+ }
+ buttons[i].gpio = of_get_gpio_flags(pp, 0, &flags);
+ buttons[i].active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ reg = of_get_property(pp, "linux,code", &len);
+ if (!reg) {
+ dev_err(dev, "Button without keycode: 0x%x\n", buttons[i].gpio);
+ goto out_fail;
+ }
+ buttons[i].code = be32_to_cpup(reg);
+
+ buttons[i].desc = of_get_property(pp, "label", &len);
+
+ reg = of_get_property(pp, "linux,input-type", &len);
+ buttons[i].type = reg ? be32_to_cpup(reg) : EV_KEY;
+
+ buttons[i].wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
+
+ reg = of_get_property(pp, "debounce-interval", &len);
+ buttons[i].debounce_interval = reg ? be32_to_cpup(reg) : 5;
+
+ i++;
+ }
+
+ pdata->buttons = buttons;
+
+ return 0;
+
+out_fail:
+ kfree(buttons);
+ return -ENODEV;
+}
+
+static struct of_device_id gpio_keys_of_match[] = {
+ { .compatible = "gpio-keys", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, gpio_keys_of_match);
+
+#else
+
+static int gpio_keys_get_devtree_pdata(struct device *dev,
+ struct gpio_keys_platform_data *altp)
+{
+ return -ENODEV;
+}
+
+#define gpio_keys_of_match NULL
+
+#endif
+
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata;
struct device *dev = &pdev->dev;
+ struct gpio_keys_platform_data alt_pdata;
struct input_dev *input;
int i, error;
int wakeup = 0;
+ if (!pdata) {
+ error = gpio_keys_get_devtree_pdata(dev, &alt_pdata);
+ if (error)
+ return error;
+ pdata = &alt_pdata;
+ }
+
ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
pdata->nbuttons * sizeof(struct gpio_button_data),
GFP_KERNEL);
fail1:
input_free_device(input);
kfree(ddata);
+ /* If we have no platform_data, we allocated buttons dynamically. */
+ if (!pdev->dev.platform_data)
+ kfree(pdata->buttons);
return error;
}
static int __devexit gpio_keys_remove(struct platform_device *pdev)
{
- struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
struct input_dev *input = ddata->input;
int i;
device_init_wakeup(&pdev->dev, 0);
- for (i = 0; i < pdata->nbuttons; i++) {
- int irq = gpio_to_irq(pdata->buttons[i].gpio);
+ for (i = 0; i < ddata->n_buttons; i++) {
+ int irq = gpio_to_irq(ddata->data[i].button->gpio);
free_irq(irq, &ddata->data[i]);
if (ddata->data[i].timer_debounce)
del_timer_sync(&ddata->data[i].timer);
cancel_work_sync(&ddata->data[i].work);
- gpio_free(pdata->buttons[i].gpio);
+ gpio_free(ddata->data[i].button->gpio);
}
input_unregister_device(input);
+ /*
+ * If we had no platform_data, we allocated buttons dynamically, and
+ * must free them here. ddata->data[0].button is the pointer to the
+ * beginning of the allocated array.
+ */
+ if (!pdev->dev.platform_data)
+ kfree(ddata->data[0].button);
+
+ kfree(ddata);
+
return 0;
}
-
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int gpio_keys_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+ struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
int i;
- if (device_may_wakeup(&pdev->dev)) {
- for (i = 0; i < pdata->nbuttons; i++) {
- struct gpio_keys_button *button = &pdata->buttons[i];
+ if (device_may_wakeup(dev)) {
+ for (i = 0; i < ddata->n_buttons; i++) {
+ struct gpio_keys_button *button = ddata->data[i].button;
if (button->wakeup) {
int irq = gpio_to_irq(button->gpio);
enable_irq_wake(irq);
static int gpio_keys_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
- struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+ struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
int i;
- for (i = 0; i < pdata->nbuttons; i++) {
+ for (i = 0; i < ddata->n_buttons; i++) {
- struct gpio_keys_button *button = &pdata->buttons[i];
- if (button->wakeup && device_may_wakeup(&pdev->dev)) {
+ struct gpio_keys_button *button = ddata->data[i].button;
+ if (button->wakeup && device_may_wakeup(dev)) {
int irq = gpio_to_irq(button->gpio);
disable_irq_wake(irq);
}
return 0;
}
-
-static const struct dev_pm_ops gpio_keys_pm_ops = {
- .suspend = gpio_keys_suspend,
- .resume = gpio_keys_resume,
-};
#endif
+static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume);
+
static struct platform_driver gpio_keys_device_driver = {
.probe = gpio_keys_probe,
.remove = __devexit_p(gpio_keys_remove),
.driver = {
.name = "gpio-keys",
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
.pm = &gpio_keys_pm_ops,
-#endif
+ .of_match_table = gpio_keys_of_match,
}
};
platform_driver_unregister(&gpio_keys_device_driver);
}
-module_init(gpio_keys_init);
+late_initcall(gpio_keys_init);
module_exit(gpio_keys_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>");
-MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs");
+MODULE_DESCRIPTION("Keyboard driver for GPIOs");
MODULE_ALIAS("platform:gpio-keys");
/* device lock */
struct mutex lock;
struct i2c_client *client;
- struct work_struct work;
struct input_dev *idev;
bool kp_enabled;
bool pm_suspend;
#define client_to_lm8323(c) container_of(c, struct lm8323_chip, client)
#define dev_to_lm8323(d) container_of(d, struct lm8323_chip, client->dev)
-#define work_to_lm8323(w) container_of(w, struct lm8323_chip, work)
#define cdev_to_pwm(c) container_of(c, struct lm8323_pwm, cdev)
#define work_to_pwm(w) container_of(w, struct lm8323_pwm, work)
* Bottom half: handle the interrupt by posting key events, or dealing with
* errors appropriately.
*/
-static void lm8323_work(struct work_struct *work)
+static irqreturn_t lm8323_irq(int irq, void *_lm)
{
- struct lm8323_chip *lm = work_to_lm8323(work);
+ struct lm8323_chip *lm = _lm;
u8 ints;
int i;
}
mutex_unlock(&lm->lock);
-}
-
-/*
- * We cannot use I2C in interrupt context, so we just schedule work.
- */
-static irqreturn_t lm8323_irq(int irq, void *data)
-{
- struct lm8323_chip *lm = data;
-
- schedule_work(&lm->work);
return IRQ_HANDLED;
}
lm->client = client;
lm->idev = idev;
mutex_init(&lm->lock);
- INIT_WORK(&lm->work, lm8323_work);
lm->size_x = pdata->size_x;
lm->size_y = pdata->size_y;
goto fail3;
}
- err = request_irq(client->irq, lm8323_irq,
- IRQF_TRIGGER_FALLING | IRQF_DISABLED,
- "lm8323", lm);
+ err = request_threaded_irq(client->irq, NULL, lm8323_irq,
+ IRQF_TRIGGER_LOW|IRQF_ONESHOT, "lm8323", lm);
if (err) {
dev_err(&client->dev, "could not get IRQ %d\n", client->irq);
goto fail4;
disable_irq_wake(client->irq);
free_irq(client->irq, lm);
- cancel_work_sync(&lm->work);
input_unregister_device(lm->idev);
* enabled capacitance sensing inputs and its run/suspend mode.
*/
#define ELECTRODE_CONF_ADDR 0x5e
+#define ELECTRODE_CONF_QUICK_CHARGE 0x80
#define AUTO_CONFIG_CTRL_ADDR 0x7b
#define AUTO_CONFIG_USL_ADDR 0x7d
#define AUTO_CONFIG_LSL_ADDR 0x7e
#define AUTO_CONFIG_TL_ADDR 0x7f
/* Threshold of touch/release trigger */
-#define TOUCH_THRESHOLD 0x0f
-#define RELEASE_THRESHOLD 0x0a
+#define TOUCH_THRESHOLD 0x08
+#define RELEASE_THRESHOLD 0x05
/* Masks for touch and release triggers */
#define TOUCH_STATUS_MASK 0xfff
/* MPR121 has 12 keys */
struct i2c_client *client)
{
const struct mpr121_init_register *reg;
- unsigned char usl, lsl, tl;
+ unsigned char usl, lsl, tl, eleconf;
int i, t, vdd, ret;
/* Set up touch/release threshold for ele0-ele11 */
ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl);
ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl);
ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl);
+
+ /*
+ * Quick charge bit will let the capacitive charge to ready
+ * state quickly, or the buttons may not function after system
+ * boot.
+ */
+ eleconf = mpr121->keycount | ELECTRODE_CONF_QUICK_CHARGE;
ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
- mpr121->keycount);
+ eleconf);
if (ret != 0)
goto err_i2c_write;
return 0;
err_pmic_reg_read:
- free_irq(kp->key_stuck_irq, NULL);
+ free_irq(kp->key_stuck_irq, kp);
err_req_stuck_irq:
- free_irq(kp->key_sense_irq, NULL);
+ free_irq(kp->key_sense_irq, kp);
err_gpio_config:
err_get_irq:
input_free_device(kp->input);
struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
- free_irq(kp->key_stuck_irq, NULL);
- free_irq(kp->key_sense_irq, NULL);
+ free_irq(kp->key_stuck_irq, kp);
+ free_irq(kp->key_sense_irq, kp);
input_unregister_device(kp->input);
kfree(kp);
input_unregister_device(data->input);
kfree(data);
- i2c_set_clientdata(client, NULL);
-
return 0;
}
return 0;
}
-#if CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_SLEEP
static int sh_keysc_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
input_set_drvdata(input_dev, kbc);
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
input_dev->keycode = kbc->keycode;
MODULE_AUTHOR("Cyril Chemparathy");
MODULE_DESCRIPTION("TNETV107X Keypad Driver");
-MODULE_ALIAS("platform: tnetv107x-keypad");
+MODULE_ALIAS("platform:tnetv107x-keypad");
MODULE_LICENSE("GPL");
To compile this driver as a module, choose M here: the module
will be called max8925_onkey.
+config INPUT_MMA8450
+ tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
+ depends on I2C
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want to support Freescale's MMA8450 Accelerometer
+ through I2C interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mma8450.
+
+config INPUT_MPU3050
+ tristate "MPU3050 Triaxial gyroscope sensor"
+ depends on I2C
+ help
+ Say Y here if you want to support InvenSense MPU3050
+ connected via an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mpu3050.
+
config INPUT_APANEL
tristate "Fujitsu Lifebook Application Panel buttons"
depends on X86 && I2C && LEDS_CLASS
To compile this driver as a module, choose M here: the module will
be called keyspan_remote.
+config INPUT_KXTJ9
+ tristate "Kionix KXTJ9 tri-axis digital accelerometer"
+ depends on I2C
+ help
+ Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
+ accelerometer.
+
+ To compile this driver as a module, choose M here: the module will
+ be called kxtj9.
+
+config INPUT_KXTJ9_POLLED_MODE
+ bool "Enable polling mode support"
+ depends on INPUT_KXTJ9
+ select INPUT_POLLDEV
+ help
+ Say Y here if you need accelerometer to work in polling mode.
+
config INPUT_POWERMATE
tristate "Griffin PowerMate and Contour Jog support"
depends on USB_ARCH_HAS_HCD
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
+obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
+obj-$(CONFIG_INPUT_MMA8450) += mma8450.o
+obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
-
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
--- /dev/null
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <chudson@kionix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input/kxtj9.h>
+#include <linux/input-polldev.h>
+
+#define NAME "kxtj9"
+#define G_MAX 8000
+/* OUTPUT REGISTERS */
+#define XOUT_L 0x06
+#define WHO_AM_I 0x0F
+/* CONTROL REGISTERS */
+#define INT_REL 0x1A
+#define CTRL_REG1 0x1B
+#define INT_CTRL1 0x1E
+#define DATA_CTRL 0x21
+/* CONTROL REGISTER 1 BITS */
+#define PC1_OFF 0x7F
+#define PC1_ON (1 << 7)
+/* Data ready funtion enable bit: set during probe if using irq mode */
+#define DRDYE (1 << 5)
+/* INTERRUPT CONTROL REGISTER 1 BITS */
+/* Set these during probe if using irq mode */
+#define KXTJ9_IEL (1 << 3)
+#define KXTJ9_IEA (1 << 4)
+#define KXTJ9_IEN (1 << 5)
+/* INPUT_ABS CONSTANTS */
+#define FUZZ 3
+#define FLAT 3
+/* RESUME STATE INDICES */
+#define RES_DATA_CTRL 0
+#define RES_CTRL_REG1 1
+#define RES_INT_CTRL1 2
+#define RESUME_ENTRIES 3
+
+/*
+ * The following table lists the maximum appropriate poll interval for each
+ * available output data rate.
+ */
+static const struct {
+ unsigned int cutoff;
+ u8 mask;
+} kxtj9_odr_table[] = {
+ { 3, ODR800F },
+ { 5, ODR400F },
+ { 10, ODR200F },
+ { 20, ODR100F },
+ { 40, ODR50F },
+ { 80, ODR25F },
+ { 0, ODR12_5F},
+};
+
+struct kxtj9_data {
+ struct i2c_client *client;
+ struct kxtj9_platform_data pdata;
+ struct input_dev *input_dev;
+#ifdef CONFIG_INPUT_KXTJ9_POLLED_MODE
+ struct input_polled_dev *poll_dev;
+#endif
+ unsigned int last_poll_interval;
+ u8 shift;
+ u8 ctrl_reg1;
+ u8 data_ctrl;
+ u8 int_ctrl;
+};
+
+static int kxtj9_i2c_read(struct kxtj9_data *tj9, u8 addr, u8 *data, int len)
+{
+ struct i2c_msg msgs[] = {
+ {
+ .addr = tj9->client->addr,
+ .flags = tj9->client->flags,
+ .len = 1,
+ .buf = &addr,
+ },
+ {
+ .addr = tj9->client->addr,
+ .flags = tj9->client->flags | I2C_M_RD,
+ .len = len,
+ .buf = data,
+ },
+ };
+
+ return i2c_transfer(tj9->client->adapter, msgs, 2);
+}
+
+static void kxtj9_report_acceleration_data(struct kxtj9_data *tj9)
+{
+ s16 acc_data[3]; /* Data bytes from hardware xL, xH, yL, yH, zL, zH */
+ s16 x, y, z;
+ int err;
+
+ err = kxtj9_i2c_read(tj9, XOUT_L, (u8 *)acc_data, 6);
+ if (err < 0)
+ dev_err(&tj9->client->dev, "accelerometer data read failed\n");
+
+ x = le16_to_cpu(acc_data[tj9->pdata.axis_map_x]) >> tj9->shift;
+ y = le16_to_cpu(acc_data[tj9->pdata.axis_map_y]) >> tj9->shift;
+ z = le16_to_cpu(acc_data[tj9->pdata.axis_map_z]) >> tj9->shift;
+
+ input_report_abs(tj9->input_dev, ABS_X, tj9->pdata.negate_x ? -x : x);
+ input_report_abs(tj9->input_dev, ABS_Y, tj9->pdata.negate_y ? -y : y);
+ input_report_abs(tj9->input_dev, ABS_Z, tj9->pdata.negate_z ? -z : z);
+ input_sync(tj9->input_dev);
+}
+
+static irqreturn_t kxtj9_isr(int irq, void *dev)
+{
+ struct kxtj9_data *tj9 = dev;
+ int err;
+
+ /* data ready is the only possible interrupt type */
+ kxtj9_report_acceleration_data(tj9);
+
+ err = i2c_smbus_read_byte_data(tj9->client, INT_REL);
+ if (err < 0)
+ dev_err(&tj9->client->dev,
+ "error clearing interrupt status: %d\n", err);
+
+ return IRQ_HANDLED;
+}
+
+static int kxtj9_update_g_range(struct kxtj9_data *tj9, u8 new_g_range)
+{
+ switch (new_g_range) {
+ case KXTJ9_G_2G:
+ tj9->shift = 4;
+ break;
+ case KXTJ9_G_4G:
+ tj9->shift = 3;
+ break;
+ case KXTJ9_G_8G:
+ tj9->shift = 2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ tj9->ctrl_reg1 &= 0xe7;
+ tj9->ctrl_reg1 |= new_g_range;
+
+ return 0;
+}
+
+static int kxtj9_update_odr(struct kxtj9_data *tj9, unsigned int poll_interval)
+{
+ int err;
+ int i;
+
+ /* Use the lowest ODR that can support the requested poll interval */
+ for (i = 0; i < ARRAY_SIZE(kxtj9_odr_table); i++) {
+ tj9->data_ctrl = kxtj9_odr_table[i].mask;
+ if (poll_interval < kxtj9_odr_table[i].cutoff)
+ break;
+ }
+
+ err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, 0);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_byte_data(tj9->client, DATA_CTRL, tj9->data_ctrl);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int kxtj9_device_power_on(struct kxtj9_data *tj9)
+{
+ if (tj9->pdata.power_on)
+ return tj9->pdata.power_on();
+
+ return 0;
+}
+
+static void kxtj9_device_power_off(struct kxtj9_data *tj9)
+{
+ int err;
+
+ tj9->ctrl_reg1 &= PC1_OFF;
+ err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1);
+ if (err < 0)
+ dev_err(&tj9->client->dev, "soft power off failed\n");
+
+ if (tj9->pdata.power_off)
+ tj9->pdata.power_off();
+}
+
+static int kxtj9_enable(struct kxtj9_data *tj9)
+{
+ int err;
+
+ err = kxtj9_device_power_on(tj9);
+ if (err < 0)
+ return err;
+
+ /* ensure that PC1 is cleared before updating control registers */
+ err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, 0);
+ if (err < 0)
+ return err;
+
+ /* only write INT_CTRL_REG1 if in irq mode */
+ if (tj9->client->irq) {
+ err = i2c_smbus_write_byte_data(tj9->client,
+ INT_CTRL1, tj9->int_ctrl);
+ if (err < 0)
+ return err;
+ }
+
+ err = kxtj9_update_g_range(tj9, tj9->pdata.g_range);
+ if (err < 0)
+ return err;
+
+ /* turn on outputs */
+ tj9->ctrl_reg1 |= PC1_ON;
+ err = i2c_smbus_write_byte_data(tj9->client, CTRL_REG1, tj9->ctrl_reg1);
+ if (err < 0)
+ return err;
+
+ err = kxtj9_update_odr(tj9, tj9->last_poll_interval);
+ if (err < 0)
+ return err;
+
+ /* clear initial interrupt if in irq mode */
+ if (tj9->client->irq) {
+ err = i2c_smbus_read_byte_data(tj9->client, INT_REL);
+ if (err < 0) {
+ dev_err(&tj9->client->dev,
+ "error clearing interrupt: %d\n", err);
+ goto fail;
+ }
+ }
+
+ return 0;
+
+fail:
+ kxtj9_device_power_off(tj9);
+ return err;
+}
+
+static void kxtj9_disable(struct kxtj9_data *tj9)
+{
+ kxtj9_device_power_off(tj9);
+}
+
+static int kxtj9_input_open(struct input_dev *input)
+{
+ struct kxtj9_data *tj9 = input_get_drvdata(input);
+
+ return kxtj9_enable(tj9);
+}
+
+static void kxtj9_input_close(struct input_dev *dev)
+{
+ struct kxtj9_data *tj9 = input_get_drvdata(dev);
+
+ kxtj9_disable(tj9);
+}
+
+static void __devinit kxtj9_init_input_device(struct kxtj9_data *tj9,
+ struct input_dev *input_dev)
+{
+ __set_bit(EV_ABS, input_dev->evbit);
+ input_set_abs_params(input_dev, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT);
+ input_set_abs_params(input_dev, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT);
+ input_set_abs_params(input_dev, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT);
+
+ input_dev->name = "kxtj9_accel";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = &tj9->client->dev;
+}
+
+static int __devinit kxtj9_setup_input_device(struct kxtj9_data *tj9)
+{
+ struct input_dev *input_dev;
+ int err;
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&tj9->client->dev, "input device allocate failed\n");
+ return -ENOMEM;
+ }
+
+ tj9->input_dev = input_dev;
+
+ input_dev->open = kxtj9_input_open;
+ input_dev->close = kxtj9_input_close;
+ input_set_drvdata(input_dev, tj9);
+
+ kxtj9_init_input_device(tj9, input_dev);
+
+ err = input_register_device(tj9->input_dev);
+ if (err) {
+ dev_err(&tj9->client->dev,
+ "unable to register input polled device %s: %d\n",
+ tj9->input_dev->name, err);
+ input_free_device(tj9->input_dev);
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ * When IRQ mode is selected, we need to provide an interface to allow the user
+ * to change the output data rate of the part. For consistency, we are using
+ * the set_poll method, which accepts a poll interval in milliseconds, and then
+ * calls update_odr() while passing this value as an argument. In IRQ mode, the
+ * data outputs will not be read AT the requested poll interval, rather, the
+ * lowest ODR that can support the requested interval. The client application
+ * will be responsible for retrieving data from the input node at the desired
+ * interval.
+ */
+
+/* Returns currently selected poll interval (in ms) */
+static ssize_t kxtj9_get_poll(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%d\n", tj9->last_poll_interval);
+}
+
+/* Allow users to select a new poll interval (in ms) */
+static ssize_t kxtj9_set_poll(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ struct input_dev *input_dev = tj9->input_dev;
+ unsigned int interval;
+ int error;
+
+ error = kstrtouint(buf, 10, &interval);
+ if (error < 0)
+ return error;
+
+ /* Lock the device to prevent races with open/close (and itself) */
+ mutex_lock(&input_dev->mutex);
+
+ disable_irq(client->irq);
+
+ /*
+ * Set current interval to the greater of the minimum interval or
+ * the requested interval
+ */
+ tj9->last_poll_interval = max(interval, tj9->pdata.min_interval);
+
+ kxtj9_update_odr(tj9, tj9->last_poll_interval);
+
+ enable_irq(client->irq);
+ mutex_unlock(&input_dev->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(poll, S_IRUGO|S_IWUSR, kxtj9_get_poll, kxtj9_set_poll);
+
+static struct attribute *kxtj9_attributes[] = {
+ &dev_attr_poll.attr,
+ NULL
+};
+
+static struct attribute_group kxtj9_attribute_group = {
+ .attrs = kxtj9_attributes
+};
+
+
+#ifdef CONFIG_INPUT_KXTJ9_POLLED_MODE
+static void kxtj9_poll(struct input_polled_dev *dev)
+{
+ struct kxtj9_data *tj9 = dev->private;
+ unsigned int poll_interval = dev->poll_interval;
+
+ kxtj9_report_acceleration_data(tj9);
+
+ if (poll_interval != tj9->last_poll_interval) {
+ kxtj9_update_odr(tj9, poll_interval);
+ tj9->last_poll_interval = poll_interval;
+ }
+}
+
+static void kxtj9_polled_input_open(struct input_polled_dev *dev)
+{
+ struct kxtj9_data *tj9 = dev->private;
+
+ kxtj9_enable(tj9);
+}
+
+static void kxtj9_polled_input_close(struct input_polled_dev *dev)
+{
+ struct kxtj9_data *tj9 = dev->private;
+
+ kxtj9_disable(tj9);
+}
+
+static int __devinit kxtj9_setup_polled_device(struct kxtj9_data *tj9)
+{
+ int err;
+ struct input_polled_dev *poll_dev;
+ poll_dev = input_allocate_polled_device();
+
+ if (!poll_dev) {
+ dev_err(&tj9->client->dev,
+ "Failed to allocate polled device\n");
+ return -ENOMEM;
+ }
+
+ tj9->poll_dev = poll_dev;
+ tj9->input_dev = poll_dev->input;
+
+ poll_dev->private = tj9;
+ poll_dev->poll = kxtj9_poll;
+ poll_dev->open = kxtj9_polled_input_open;
+ poll_dev->close = kxtj9_polled_input_close;
+
+ kxtj9_init_input_device(tj9, poll_dev->input);
+
+ err = input_register_polled_device(poll_dev);
+ if (err) {
+ dev_err(&tj9->client->dev,
+ "Unable to register polled device, err=%d\n", err);
+ input_free_polled_device(poll_dev);
+ return err;
+ }
+
+ return 0;
+}
+
+static void __devexit kxtj9_teardown_polled_device(struct kxtj9_data *tj9)
+{
+ input_unregister_polled_device(tj9->poll_dev);
+ input_free_polled_device(tj9->poll_dev);
+}
+
+#else
+
+static inline int kxtj9_setup_polled_device(struct kxtj9_data *tj9)
+{
+ return -ENOSYS;
+}
+
+static inline void kxtj9_teardown_polled_device(struct kxtj9_data *tj9)
+{
+}
+
+#endif
+
+static int __devinit kxtj9_verify(struct kxtj9_data *tj9)
+{
+ int retval;
+
+ retval = kxtj9_device_power_on(tj9);
+ if (retval < 0)
+ return retval;
+
+ retval = i2c_smbus_read_byte_data(tj9->client, WHO_AM_I);
+ if (retval < 0) {
+ dev_err(&tj9->client->dev, "read err int source\n");
+ goto out;
+ }
+
+ retval = retval != 0x06 ? -EIO : 0;
+
+out:
+ kxtj9_device_power_off(tj9);
+ return retval;
+}
+
+static int __devinit kxtj9_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct kxtj9_platform_data *pdata = client->dev.platform_data;
+ struct kxtj9_data *tj9;
+ int err;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "client is not i2c capable\n");
+ return -ENXIO;
+ }
+
+ if (!pdata) {
+ dev_err(&client->dev, "platform data is NULL; exiting\n");
+ return -EINVAL;
+ }
+
+ tj9 = kzalloc(sizeof(*tj9), GFP_KERNEL);
+ if (!tj9) {
+ dev_err(&client->dev,
+ "failed to allocate memory for module data\n");
+ return -ENOMEM;
+ }
+
+ tj9->client = client;
+ tj9->pdata = *pdata;
+
+ if (pdata->init) {
+ err = pdata->init();
+ if (err < 0)
+ goto err_free_mem;
+ }
+
+ err = kxtj9_verify(tj9);
+ if (err < 0) {
+ dev_err(&client->dev, "device not recognized\n");
+ goto err_pdata_exit;
+ }
+
+ i2c_set_clientdata(client, tj9);
+
+ tj9->ctrl_reg1 = tj9->pdata.res_12bit | tj9->pdata.g_range;
+ tj9->data_ctrl = tj9->pdata.data_odr_init;
+
+ if (client->irq) {
+ /* If in irq mode, populate INT_CTRL_REG1 and enable DRDY. */
+ tj9->int_ctrl |= KXTJ9_IEN | KXTJ9_IEA | KXTJ9_IEL;
+ tj9->ctrl_reg1 |= DRDYE;
+
+ err = kxtj9_setup_input_device(tj9);
+ if (err)
+ goto err_pdata_exit;
+
+ err = request_threaded_irq(client->irq, NULL, kxtj9_isr,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "kxtj9-irq", tj9);
+ if (err) {
+ dev_err(&client->dev, "request irq failed: %d\n", err);
+ goto err_destroy_input;
+ }
+
+ err = sysfs_create_group(&client->dev.kobj, &kxtj9_attribute_group);
+ if (err) {
+ dev_err(&client->dev, "sysfs create failed: %d\n", err);
+ goto err_free_irq;
+ }
+
+ } else {
+ err = kxtj9_setup_polled_device(tj9);
+ if (err)
+ goto err_pdata_exit;
+ }
+
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, tj9);
+err_destroy_input:
+ input_unregister_device(tj9->input_dev);
+err_pdata_exit:
+ if (tj9->pdata.exit)
+ tj9->pdata.exit();
+err_free_mem:
+ kfree(tj9);
+ return err;
+}
+
+static int __devexit kxtj9_remove(struct i2c_client *client)
+{
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+ if (client->irq) {
+ sysfs_remove_group(&client->dev.kobj, &kxtj9_attribute_group);
+ free_irq(client->irq, tj9);
+ input_unregister_device(tj9->input_dev);
+ } else {
+ kxtj9_teardown_polled_device(tj9);
+ }
+
+ if (tj9->pdata.exit)
+ tj9->pdata.exit();
+
+ kfree(tj9);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int kxtj9_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ struct input_dev *input_dev = tj9->input_dev;
+
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users)
+ kxtj9_disable(tj9);
+
+ mutex_unlock(&input_dev->mutex);
+ return 0;
+}
+
+static int kxtj9_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ struct input_dev *input_dev = tj9->input_dev;
+ int retval = 0;
+
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users)
+ kxtj9_enable(tj9);
+
+ mutex_unlock(&input_dev->mutex);
+ return retval;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(kxtj9_pm_ops, kxtj9_suspend, kxtj9_resume);
+
+static const struct i2c_device_id kxtj9_id[] = {
+ { NAME, 0 },
+ { },
+};
+
+MODULE_DEVICE_TABLE(i2c, kxtj9_id);
+
+static struct i2c_driver kxtj9_driver = {
+ .driver = {
+ .name = NAME,
+ .owner = THIS_MODULE,
+ .pm = &kxtj9_pm_ops,
+ },
+ .probe = kxtj9_probe,
+ .remove = __devexit_p(kxtj9_remove),
+ .id_table = kxtj9_id,
+};
+
+static int __init kxtj9_init(void)
+{
+ return i2c_add_driver(&kxtj9_driver);
+}
+module_init(kxtj9_init);
+
+static void __exit kxtj9_exit(void)
+{
+ i2c_del_driver(&kxtj9_driver);
+}
+module_exit(kxtj9_exit);
+
+MODULE_DESCRIPTION("KXTJ9 accelerometer driver");
+MODULE_AUTHOR("Chris Hudson <chudson@kionix.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Driver for Freescale's 3-Axis Accelerometer MMA8450
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input-polldev.h>
+
+#define MMA8450_DRV_NAME "mma8450"
+
+#define MODE_CHANGE_DELAY_MS 100
+#define POLL_INTERVAL 100
+#define POLL_INTERVAL_MAX 500
+
+/* register definitions */
+#define MMA8450_STATUS 0x00
+#define MMA8450_STATUS_ZXYDR 0x08
+
+#define MMA8450_OUT_X8 0x01
+#define MMA8450_OUT_Y8 0x02
+#define MMA8450_OUT_Z8 0x03
+
+#define MMA8450_OUT_X_LSB 0x05
+#define MMA8450_OUT_X_MSB 0x06
+#define MMA8450_OUT_Y_LSB 0x07
+#define MMA8450_OUT_Y_MSB 0x08
+#define MMA8450_OUT_Z_LSB 0x09
+#define MMA8450_OUT_Z_MSB 0x0a
+
+#define MMA8450_XYZ_DATA_CFG 0x16
+
+#define MMA8450_CTRL_REG1 0x38
+#define MMA8450_CTRL_REG2 0x39
+
+/* mma8450 status */
+struct mma8450 {
+ struct i2c_client *client;
+ struct input_polled_dev *idev;
+};
+
+static int mma8450_read(struct mma8450 *m, unsigned off)
+{
+ struct i2c_client *c = m->client;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(c, off);
+ if (ret < 0)
+ dev_err(&c->dev,
+ "failed to read register 0x%02x, error %d\n",
+ off, ret);
+
+ return ret;
+}
+
+static int mma8450_write(struct mma8450 *m, unsigned off, u8 v)
+{
+ struct i2c_client *c = m->client;
+ int error;
+
+ error = i2c_smbus_write_byte_data(c, off, v);
+ if (error < 0) {
+ dev_err(&c->dev,
+ "failed to write to register 0x%02x, error %d\n",
+ off, error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int mma8450_read_xyz(struct mma8450 *m, int *x, int *y, int *z)
+{
+ struct i2c_client *c = m->client;
+ u8 buff[6];
+ int err;
+
+ err = i2c_smbus_read_i2c_block_data(c, MMA8450_OUT_X_LSB, 6, buff);
+ if (err < 0) {
+ dev_err(&c->dev,
+ "failed to read block data at 0x%02x, error %d\n",
+ MMA8450_OUT_X_LSB, err);
+ return err;
+ }
+
+ *x = ((buff[1] << 4) & 0xff0) | (buff[0] & 0xf);
+ *y = ((buff[3] << 4) & 0xff0) | (buff[2] & 0xf);
+ *z = ((buff[5] << 4) & 0xff0) | (buff[4] & 0xf);
+
+ return 0;
+}
+
+static void mma8450_poll(struct input_polled_dev *dev)
+{
+ struct mma8450 *m = dev->private;
+ int x, y, z;
+ int ret;
+ int err;
+
+ ret = mma8450_read(m, MMA8450_STATUS);
+ if (ret < 0)
+ return;
+
+ if (!(ret & MMA8450_STATUS_ZXYDR))
+ return;
+
+ err = mma8450_read_xyz(m, &x, &y, &z);
+ if (err)
+ return;
+
+ input_report_abs(dev->input, ABS_X, x);
+ input_report_abs(dev->input, ABS_Y, y);
+ input_report_abs(dev->input, ABS_Z, z);
+ input_sync(dev->input);
+}
+
+/* Initialize the MMA8450 chip */
+static void mma8450_open(struct input_polled_dev *dev)
+{
+ struct mma8450 *m = dev->private;
+ int err;
+
+ /* enable all events from X/Y/Z, no FIFO */
+ err = mma8450_write(m, MMA8450_XYZ_DATA_CFG, 0x07);
+ if (err)
+ return;
+
+ /*
+ * Sleep mode poll rate - 50Hz
+ * System output data rate - 400Hz
+ * Full scale selection - Active, +/- 2G
+ */
+ err = mma8450_write(m, MMA8450_CTRL_REG1, 0x01);
+ if (err < 0)
+ return;
+
+ msleep(MODE_CHANGE_DELAY_MS);
+}
+
+static void mma8450_close(struct input_polled_dev *dev)
+{
+ struct mma8450 *m = dev->private;
+
+ mma8450_write(m, MMA8450_CTRL_REG1, 0x00);
+ mma8450_write(m, MMA8450_CTRL_REG2, 0x01);
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int __devinit mma8450_probe(struct i2c_client *c,
+ const struct i2c_device_id *id)
+{
+ struct input_polled_dev *idev;
+ struct mma8450 *m;
+ int err;
+
+ m = kzalloc(sizeof(struct mma8450), GFP_KERNEL);
+ idev = input_allocate_polled_device();
+ if (!m || !idev) {
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ m->client = c;
+ m->idev = idev;
+
+ idev->private = m;
+ idev->input->name = MMA8450_DRV_NAME;
+ idev->input->id.bustype = BUS_I2C;
+ idev->poll = mma8450_poll;
+ idev->poll_interval = POLL_INTERVAL;
+ idev->poll_interval_max = POLL_INTERVAL_MAX;
+ idev->open = mma8450_open;
+ idev->close = mma8450_close;
+
+ __set_bit(EV_ABS, idev->input->evbit);
+ input_set_abs_params(idev->input, ABS_X, -2048, 2047, 32, 32);
+ input_set_abs_params(idev->input, ABS_Y, -2048, 2047, 32, 32);
+ input_set_abs_params(idev->input, ABS_Z, -2048, 2047, 32, 32);
+
+ err = input_register_polled_device(idev);
+ if (err) {
+ dev_err(&c->dev, "failed to register polled input device\n");
+ goto err_free_mem;
+ }
+
+ return 0;
+
+err_free_mem:
+ input_free_polled_device(idev);
+ kfree(m);
+ return err;
+}
+
+static int __devexit mma8450_remove(struct i2c_client *c)
+{
+ struct mma8450 *m = i2c_get_clientdata(c);
+ struct input_polled_dev *idev = m->idev;
+
+ input_unregister_polled_device(idev);
+ input_free_polled_device(idev);
+ kfree(m);
+
+ return 0;
+}
+
+static const struct i2c_device_id mma8450_id[] = {
+ { MMA8450_DRV_NAME, 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, mma8450_id);
+
+static struct i2c_driver mma8450_driver = {
+ .driver = {
+ .name = MMA8450_DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = mma8450_probe,
+ .remove = __devexit_p(mma8450_remove),
+ .id_table = mma8450_id,
+};
+
+static int __init mma8450_init(void)
+{
+ return i2c_add_driver(&mma8450_driver);
+}
+module_init(mma8450_init);
+
+static void __exit mma8450_exit(void)
+{
+ i2c_del_driver(&mma8450_driver);
+}
+module_exit(mma8450_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MMA8450 3-Axis Accelerometer Driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * MPU3050 Tri-axis gyroscope driver
+ *
+ * Copyright (C) 2011 Wistron Co.Ltd
+ * Joseph Lai <joseph_lai@wistron.com>
+ *
+ * Trimmed down by Alan Cox <alan@linux.intel.com> to produce this version
+ *
+ * This is a 'lite' version of the driver, while we consider the right way
+ * to present the other features to user space. In particular it requires the
+ * device has an IRQ, and it only provides an input interface, so is not much
+ * use for device orientation. A fuller version is available from the Meego
+ * tree.
+ *
+ * This program is based on bma023.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#define MPU3050_CHIP_ID_REG 0x00
+#define MPU3050_CHIP_ID 0x69
+#define MPU3050_XOUT_H 0x1D
+#define MPU3050_PWR_MGM 0x3E
+#define MPU3050_PWR_MGM_POS 6
+#define MPU3050_PWR_MGM_MASK 0x40
+
+#define MPU3050_AUTO_DELAY 1000
+
+#define MPU3050_MIN_VALUE -32768
+#define MPU3050_MAX_VALUE 32767
+
+struct axis_data {
+ s16 x;
+ s16 y;
+ s16 z;
+};
+
+struct mpu3050_sensor {
+ struct i2c_client *client;
+ struct device *dev;
+ struct input_dev *idev;
+};
+
+/**
+ * mpu3050_xyz_read_reg - read the axes values
+ * @buffer: provide register addr and get register
+ * @length: length of register
+ *
+ * Reads the register values in one transaction or returns a negative
+ * error code on failure.
+ */
+static int mpu3050_xyz_read_reg(struct i2c_client *client,
+ u8 *buffer, int length)
+{
+ /*
+ * Annoying we can't make this const because the i2c layer doesn't
+ * declare input buffers const.
+ */
+ char cmd = MPU3050_XOUT_H;
+ struct i2c_msg msg[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &cmd,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = length,
+ .buf = buffer,
+ },
+ };
+
+ return i2c_transfer(client->adapter, msg, 2);
+}
+
+/**
+ * mpu3050_read_xyz - get co-ordinates from device
+ * @client: i2c address of sensor
+ * @coords: co-ordinates to update
+ *
+ * Return the converted X Y and Z co-ordinates from the sensor device
+ */
+static void mpu3050_read_xyz(struct i2c_client *client,
+ struct axis_data *coords)
+{
+ u16 buffer[3];
+
+ mpu3050_xyz_read_reg(client, (u8 *)buffer, 6);
+ coords->x = be16_to_cpu(buffer[0]);
+ coords->y = be16_to_cpu(buffer[1]);
+ coords->z = be16_to_cpu(buffer[2]);
+ dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__,
+ coords->x, coords->y, coords->z);
+}
+
+/**
+ * mpu3050_set_power_mode - set the power mode
+ * @client: i2c client for the sensor
+ * @val: value to switch on/off of power, 1: normal power, 0: low power
+ *
+ * Put device to normal-power mode or low-power mode.
+ */
+static void mpu3050_set_power_mode(struct i2c_client *client, u8 val)
+{
+ u8 value;
+
+ value = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM);
+ value = (value & ~MPU3050_PWR_MGM_MASK) |
+ (((val << MPU3050_PWR_MGM_POS) & MPU3050_PWR_MGM_MASK) ^
+ MPU3050_PWR_MGM_MASK);
+ i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, value);
+}
+
+/**
+ * mpu3050_input_open - called on input event open
+ * @input: input dev of opened device
+ *
+ * The input layer calls this function when input event is opened. The
+ * function will push the device to resume. Then, the device is ready
+ * to provide data.
+ */
+static int mpu3050_input_open(struct input_dev *input)
+{
+ struct mpu3050_sensor *sensor = input_get_drvdata(input);
+
+ pm_runtime_get(sensor->dev);
+
+ return 0;
+}
+
+/**
+ * mpu3050_input_close - called on input event close
+ * @input: input dev of closed device
+ *
+ * The input layer calls this function when input event is closed. The
+ * function will push the device to suspend.
+ */
+static void mpu3050_input_close(struct input_dev *input)
+{
+ struct mpu3050_sensor *sensor = input_get_drvdata(input);
+
+ pm_runtime_put(sensor->dev);
+}
+
+/**
+ * mpu3050_interrupt_thread - handle an IRQ
+ * @irq: interrupt numner
+ * @data: the sensor
+ *
+ * Called by the kernel single threaded after an interrupt occurs. Read
+ * the sensor data and generate an input event for it.
+ */
+static irqreturn_t mpu3050_interrupt_thread(int irq, void *data)
+{
+ struct mpu3050_sensor *sensor = data;
+ struct axis_data axis;
+
+ mpu3050_read_xyz(sensor->client, &axis);
+
+ input_report_abs(sensor->idev, ABS_X, axis.x);
+ input_report_abs(sensor->idev, ABS_Y, axis.y);
+ input_report_abs(sensor->idev, ABS_Z, axis.z);
+ input_sync(sensor->idev);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * mpu3050_probe - device detection callback
+ * @client: i2c client of found device
+ * @id: id match information
+ *
+ * The I2C layer calls us when it believes a sensor is present at this
+ * address. Probe to see if this is correct and to validate the device.
+ *
+ * If present install the relevant sysfs interfaces and input device.
+ */
+static int __devinit mpu3050_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mpu3050_sensor *sensor;
+ struct input_dev *idev;
+ int ret;
+ int error;
+
+ sensor = kzalloc(sizeof(struct mpu3050_sensor), GFP_KERNEL);
+ idev = input_allocate_device();
+ if (!sensor || !idev) {
+ dev_err(&client->dev, "failed to allocate driver data\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ sensor->client = client;
+ sensor->dev = &client->dev;
+ sensor->idev = idev;
+
+ mpu3050_set_power_mode(client, 1);
+ msleep(10);
+
+ ret = i2c_smbus_read_byte_data(client, MPU3050_CHIP_ID_REG);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to detect device\n");
+ error = -ENXIO;
+ goto err_free_mem;
+ }
+
+ if (ret != MPU3050_CHIP_ID) {
+ dev_err(&client->dev, "unsupported chip id\n");
+ error = -ENXIO;
+ goto err_free_mem;
+ }
+
+ idev->name = "MPU3050";
+ idev->id.bustype = BUS_I2C;
+ idev->dev.parent = &client->dev;
+
+ idev->open = mpu3050_input_open;
+ idev->close = mpu3050_input_close;
+
+ __set_bit(EV_ABS, idev->evbit);
+ input_set_abs_params(idev, ABS_X,
+ MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
+ input_set_abs_params(idev, ABS_Y,
+ MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
+ input_set_abs_params(idev, ABS_Z,
+ MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
+
+ input_set_drvdata(idev, sensor);
+
+ pm_runtime_set_active(&client->dev);
+
+ error = request_threaded_irq(client->irq,
+ NULL, mpu3050_interrupt_thread,
+ IRQF_TRIGGER_RISING,
+ "mpu_int", sensor);
+ if (error) {
+ dev_err(&client->dev,
+ "can't get IRQ %d, error %d\n", client->irq, error);
+ goto err_pm_set_suspended;
+ }
+
+ error = input_register_device(idev);
+ if (error) {
+ dev_err(&client->dev, "failed to register input device\n");
+ goto err_free_irq;
+ }
+
+ pm_runtime_enable(&client->dev);
+ pm_runtime_set_autosuspend_delay(&client->dev, MPU3050_AUTO_DELAY);
+
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, sensor);
+err_pm_set_suspended:
+ pm_runtime_set_suspended(&client->dev);
+err_free_mem:
+ input_unregister_device(idev);
+ kfree(sensor);
+ return error;
+}
+
+/**
+ * mpu3050_remove - remove a sensor
+ * @client: i2c client of sensor being removed
+ *
+ * Our sensor is going away, clean up the resources.
+ */
+static int __devexit mpu3050_remove(struct i2c_client *client)
+{
+ struct mpu3050_sensor *sensor = i2c_get_clientdata(client);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+
+ free_irq(client->irq, sensor);
+ input_unregister_device(sensor->idev);
+ kfree(sensor);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+/**
+ * mpu3050_suspend - called on device suspend
+ * @dev: device being suspended
+ *
+ * Put the device into sleep mode before we suspend the machine.
+ */
+static int mpu3050_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ mpu3050_set_power_mode(client, 0);
+
+ return 0;
+}
+
+/**
+ * mpu3050_resume - called on device resume
+ * @dev: device being resumed
+ *
+ * Put the device into powered mode on resume.
+ */
+static int mpu3050_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ mpu3050_set_power_mode(client, 1);
+ msleep(100); /* wait for gyro chip resume */
+
+ return 0;
+}
+#endif
+
+static UNIVERSAL_DEV_PM_OPS(mpu3050_pm, mpu3050_suspend, mpu3050_resume, NULL);
+
+static const struct i2c_device_id mpu3050_ids[] = {
+ { "mpu3050", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mpu3050_ids);
+
+static struct i2c_driver mpu3050_i2c_driver = {
+ .driver = {
+ .name = "mpu3050",
+ .owner = THIS_MODULE,
+ .pm = &mpu3050_pm,
+ },
+ .probe = mpu3050_probe,
+ .remove = __devexit_p(mpu3050_remove),
+ .id_table = mpu3050_ids,
+};
+
+static int __init mpu3050_init(void)
+{
+ return i2c_add_driver(&mpu3050_i2c_driver);
+}
+module_init(mpu3050_init);
+
+static void __exit mpu3050_exit(void)
+{
+ i2c_del_driver(&mpu3050_i2c_driver);
+}
+module_exit(mpu3050_exit);
+
+MODULE_AUTHOR("Wistron Corp.");
+MODULE_DESCRIPTION("MPU3050 Tri-axis gyroscope driver");
+MODULE_LICENSE("GPL");
static int __init xenkbd_init(void)
{
- if (!xen_pv_domain())
+ if (!xen_domain())
return -ENODEV;
/* Nothing to do if running in dom0. */
}
module_exit(gpio_mouse_exit);
-MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("GPIO mouse driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
static int lifebook_limit_serio3(const struct dmi_system_id *d)
{
desired_serio_phys = "isa0060/serio3";
- return 0;
+ return 1;
}
static bool lifebook_use_6byte_proto;
static int lifebook_set_6byte_proto(const struct dmi_system_id *d)
{
lifebook_use_6byte_proto = true;
- return 0;
+ return 1;
}
static const struct dmi_system_id __initconst lifebook_dmi_table[] = {
#include <linux/init.h>
#include <linux/input.h>
-#include <linux/version.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/input.h>
#include <linux/ctype.h>
#include <linux/libps2.h>
static int synaptics_resolution(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
- unsigned char res[3];
- unsigned char max[3];
+ unsigned char resp[3];
if (SYN_ID_MAJOR(priv->identity) < 4)
return 0;
- if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
- if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
- priv->x_res = res[0]; /* x resolution in units/mm */
- priv->y_res = res[2]; /* y resolution in units/mm */
+ if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, resp) == 0) {
+ if (resp[0] != 0 && (resp[1] & 0x80) && resp[2] != 0) {
+ priv->x_res = resp[0]; /* x resolution in units/mm */
+ priv->y_res = resp[2]; /* y resolution in units/mm */
}
}
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 &&
SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) {
- if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_DIMENSIONS, max)) {
- printk(KERN_ERR "Synaptics claims to have dimensions query,"
- " but I'm not able to read it.\n");
+ if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) {
+ printk(KERN_ERR "Synaptics claims to have max coordinates"
+ " query, but I'm not able to read it.\n");
+ } else {
+ priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
+ priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
+ }
+ }
+
+ if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 &&
+ SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) {
+ if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) {
+ printk(KERN_ERR "Synaptics claims to have min coordinates"
+ " query, but I'm not able to read it.\n");
} else {
- priv->x_max = (max[0] << 5) | ((max[1] & 0x0f) << 1);
- priv->y_max = (max[2] << 5) | ((max[1] & 0xf0) >> 3);
+ priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
+ priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
}
}
memset(hw, 0, sizeof(struct synaptics_hw_state));
if (SYN_MODEL_NEWABS(priv->model_id)) {
- hw->x = (((buf[3] & 0x10) << 8) |
- ((buf[1] & 0x0f) << 8) |
- buf[4]);
- hw->y = (((buf[3] & 0x20) << 7) |
- ((buf[1] & 0xf0) << 4) |
- buf[5]);
-
- hw->z = buf[2];
hw->w = (((buf[0] & 0x30) >> 2) |
((buf[0] & 0x04) >> 1) |
((buf[3] & 0x04) >> 2));
- if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) {
- /* Gesture packet: (x, y, z) at half resolution */
- priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
- priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
- priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
- return 1;
- }
-
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
}
+ if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) {
+ /* Gesture packet: (x, y, z) at half resolution */
+ priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
+ priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
+ priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
+ return 1;
+ }
+
+ hw->x = (((buf[3] & 0x10) << 8) |
+ ((buf[1] & 0x0f) << 8) |
+ buf[4]);
+ hw->y = (((buf[3] & 0x20) << 7) |
+ ((buf[1] & 0xf0) << 4) |
+ buf[5]);
+ hw->z = buf[2];
+
if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
((buf[0] ^ buf[3]) & 0x02)) {
switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
return 0;
}
-static void set_slot(struct input_dev *dev, int slot, bool active, int x, int y)
+static void synaptics_report_semi_mt_slot(struct input_dev *dev, int slot,
+ bool active, int x, int y)
{
input_mt_slot(dev, slot);
input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
int num_fingers)
{
if (num_fingers >= 2) {
- set_slot(dev, 0, true, min(a->x, b->x), min(a->y, b->y));
- set_slot(dev, 1, true, max(a->x, b->x), max(a->y, b->y));
+ synaptics_report_semi_mt_slot(dev, 0, true, min(a->x, b->x),
+ min(a->y, b->y));
+ synaptics_report_semi_mt_slot(dev, 1, true, max(a->x, b->x),
+ max(a->y, b->y));
} else if (num_fingers == 1) {
- set_slot(dev, 0, true, a->x, a->y);
- set_slot(dev, 1, false, 0, 0);
+ synaptics_report_semi_mt_slot(dev, 0, true, a->x, a->y);
+ synaptics_report_semi_mt_slot(dev, 1, false, 0, 0);
} else {
- set_slot(dev, 0, false, 0, 0);
- set_slot(dev, 1, false, 0, 0);
+ synaptics_report_semi_mt_slot(dev, 0, false, 0, 0);
+ synaptics_report_semi_mt_slot(dev, 1, false, 0, 0);
}
}
static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
{
int i;
+ int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ?
+ SYN_REDUCED_FILTER_FUZZ : 0;
__set_bit(INPUT_PROP_POINTER, dev->propbit);
__set_bit(EV_ABS, dev->evbit);
input_set_abs_params(dev, ABS_X,
- XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0);
+ priv->x_min ?: XMIN_NOMINAL,
+ priv->x_max ?: XMAX_NOMINAL,
+ fuzz, 0);
input_set_abs_params(dev, ABS_Y,
- YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
+ priv->y_min ?: YMIN_NOMINAL,
+ priv->y_max ?: YMAX_NOMINAL,
+ fuzz, 0);
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
input_mt_init_slots(dev, 2);
- input_set_abs_params(dev, ABS_MT_POSITION_X, XMIN_NOMINAL,
- priv->x_max ?: XMAX_NOMINAL, 0, 0);
- input_set_abs_params(dev, ABS_MT_POSITION_Y, YMIN_NOMINAL,
- priv->y_max ?: YMAX_NOMINAL, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_X,
+ priv->x_min ?: XMIN_NOMINAL,
+ priv->x_max ?: XMAX_NOMINAL,
+ fuzz, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y,
+ priv->y_min ?: YMIN_NOMINAL,
+ priv->y_max ?: YMAX_NOMINAL,
+ fuzz, 0);
+
+ input_abs_set_res(dev, ABS_MT_POSITION_X, priv->x_res);
+ input_abs_set_res(dev, ABS_MT_POSITION_Y, priv->y_res);
}
if (SYN_CAP_PALMDETECT(priv->capabilities))
}
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS */
-
#define SYN_QUE_RESOLUTION 0x08
#define SYN_QUE_EXT_CAPAB 0x09
#define SYN_QUE_EXT_CAPAB_0C 0x0c
-#define SYN_QUE_EXT_DIMENSIONS 0x0d
+#define SYN_QUE_EXT_MAX_COORDS 0x0d
+#define SYN_QUE_EXT_MIN_COORDS 0x0f
/* synatics modes */
#define SYN_BIT_ABSOLUTE_MODE (1 << 7)
* 1 0x60 multifinger mode identifies firmware finger counting
* (not reporting!) algorithm.
* Not particularly meaningful
- * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered
- * 2 0x01 clickpad bit 1 2-button ClickPad
- * 2 0x02 deluxe LED controls touchpad support LED commands
+ * 1 0x80 covered pad W clipped to 14, 15 == pad mostly covered
+ * 2 0x01 clickpad bit 1 2-button ClickPad
+ * 2 0x02 deluxe LED controls touchpad support LED commands
* ala multimedia control bar
* 2 0x04 reduced filtering firmware does less filtering on
* position data, driver should watch
* for noise.
+ * 2 0x20 report min query 0x0f gives min coord reported
*/
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000)
+#define SYN_CAP_MIN_DIMENSIONS(ex0c) ((ex0c) & 0x002000)
#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000)
+#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
#define SYN_NEWABS_RELAXED 2
#define SYN_OLDABS 3
+/* amount to fuzz position data when touchpad reports reduced filtering */
+#define SYN_REDUCED_FILTER_FUZZ 8
+
/*
* A structure to describe the state of the touchpad hardware (buttons and pad)
*/
unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */
unsigned long int identity; /* Identification */
unsigned int x_res, y_res; /* X/Y resolution in units/mm */
- unsigned int x_max, y_max; /* Max dimensions (from FW) */
+ unsigned int x_max, y_max; /* Max coordinates (from FW) */
+ unsigned int x_min, y_min; /* Min coordinates (from FW) */
unsigned char pkt_type; /* packet type - old, new, etc */
unsigned char mode; /* current mode byte */
module_init(psif_init);
module_exit(psif_exit);
-MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
MODULE_LICENSE("GPL");
/************************* Keepalive timer task *********************/
-void hp_sdc_kicker (unsigned long data)
+static void hp_sdc_kicker(unsigned long data)
{
tasklet_schedule(&hp_sdc.task);
/* Re-insert the periodic task. */
/* toolMode codes
*/
#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN
-#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN
#define AIPTEK_TOOL_BUTTON_PENCIL_MODE BTN_TOOL_PENCIL
#define AIPTEK_TOOL_BUTTON_BRUSH_MODE BTN_TOOL_BRUSH
#define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE BTN_TOOL_AIRBRUSH
#include "wacom_wac.h"
#include "wacom.h"
#include <linux/input/mt.h>
+#include <linux/hid.h>
/* resolution for penabled devices */
#define WACOM_PL_RES 20
wacom->id[0] = 0;
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
input_report_key(input, wacom->tool[0], prox);
+ input_event(input, EV_MSC, MSC_SERIAL, 1);
input_sync(input); /* sync last event */
}
prox = data[7] & 0xf8;
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
- input_report_key(input, BTN_0, (data[7] & 0x40));
- input_report_key(input, BTN_4, (data[7] & 0x80));
+ input_report_key(input, BTN_BACK, (data[7] & 0x40));
+ input_report_key(input, BTN_FORWARD, (data[7] & 0x80));
rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
input_report_rel(input, REL_WHEEL, rw);
- input_report_key(input, BTN_TOOL_FINGER, 0xf0);
if (!prox)
wacom->id[1] = 0;
input_report_abs(input, ABS_MISC, wacom->id[1]);
prox = (data[7] & 0xf8) || data[8];
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
- input_report_key(input, BTN_0, (data[7] & 0x08));
- input_report_key(input, BTN_1, (data[7] & 0x20));
- input_report_key(input, BTN_4, (data[7] & 0x10));
- input_report_key(input, BTN_5, (data[7] & 0x40));
+ input_report_key(input, BTN_BACK, (data[7] & 0x08));
+ input_report_key(input, BTN_LEFT, (data[7] & 0x20));
+ input_report_key(input, BTN_FORWARD, (data[7] & 0x10));
+ input_report_key(input, BTN_RIGHT, (data[7] & 0x40));
input_report_abs(input, ABS_WHEEL, (data[8] & 0x7f));
- input_report_key(input, BTN_TOOL_FINGER, 0xf0);
if (!prox)
wacom->id[1] = 0;
input_report_abs(input, ABS_MISC, wacom->id[1]);
input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
+ retval = 1;
}
- retval = 1;
break;
}
exit:
/* pad packets. Works as a second tool and is always in prox */
if (data[0] == WACOM_REPORT_INTUOSPAD) {
- /* initiate the pad as a device */
- if (wacom->tool[1] != BTN_TOOL_FINGER)
- wacom->tool[1] = BTN_TOOL_FINGER;
-
if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
input_report_key(input, BTN_0, (data[2] & 0x01));
input_report_key(input, BTN_1, (data[3] & 0x01));
switch (wacom_wac->features.type) {
case WACOM_MO:
- __set_bit(BTN_1, input_dev->keybit);
- __set_bit(BTN_5, input_dev->keybit);
-
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
/* fall through */
case WACOM_G4:
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
- __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
- __set_bit(BTN_0, input_dev->keybit);
- __set_bit(BTN_4, input_dev->keybit);
+ __set_bit(BTN_BACK, input_dev->keybit);
+ __set_bit(BTN_FORWARD, input_dev->keybit);
/* fall through */
case GRAPHIRE:
case CINTIQ:
for (i = 0; i < 8; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
- __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
- input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
- input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+ if (wacom_wac->features.type != WACOM_21UX2) {
+ input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+ }
+
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
wacom_setup_cintiq(wacom_wac);
break;
__set_bit(BTN_2, input_dev->keybit);
__set_bit(BTN_3, input_dev->keybit);
- __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
-
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
/* fall through */
case INTUOS4S:
for (i = 0; i < 7; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
- __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
wacom_setup_intuos(wacom_wac);
static const struct wacom_features wacom_features_0x69 =
{ "Wacom Bamboo1", WACOM_PKGLEN_GRAPHIRE, 5104, 3712, 511,
63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
+static const struct wacom_features wacom_features_0x6A =
+ { "Wacom Bamboo1 4x6", WACOM_PKGLEN_GRAPHIRE, 14760, 9225, 1023,
+ 63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x6B =
+ { "Wacom Bamboo1 5x8", WACOM_PKGLEN_GRAPHIRE, 21648, 13530, 1023,
+ 63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x20 =
{ "Wacom Intuos 4x5", WACOM_PKGLEN_INTUOS, 12700, 10600, 1023,
31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x93 =
{ "Wacom ISDv4 93", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x97 =
+ { "Wacom ISDv4 97", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 511,
+ 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x9A =
{ "Wacom ISDv4 9A", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023,
63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD4 =
- { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255,
+ { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD6 =
{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
.driver_info = (kernel_ulong_t)&wacom_features_##prod
+#define USB_DEVICE_DETAILED(prod, class, sub, proto) \
+ USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_WACOM, prod, class, \
+ sub, proto), \
+ .driver_info = (kernel_ulong_t)&wacom_features_##prod
+
#define USB_DEVICE_LENOVO(prod) \
USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \
.driver_info = (kernel_ulong_t)&wacom_features_##prod
{ USB_DEVICE_WACOM(0x64) },
{ USB_DEVICE_WACOM(0x65) },
{ USB_DEVICE_WACOM(0x69) },
+ { USB_DEVICE_WACOM(0x6A) },
+ { USB_DEVICE_WACOM(0x6B) },
{ USB_DEVICE_WACOM(0x20) },
{ USB_DEVICE_WACOM(0x21) },
{ USB_DEVICE_WACOM(0x22) },
{ USB_DEVICE_WACOM(0xC5) },
{ USB_DEVICE_WACOM(0xC6) },
{ USB_DEVICE_WACOM(0xC7) },
- { USB_DEVICE_WACOM(0xCE) },
+ /*
+ * DTU-2231 has two interfaces on the same configuration,
+ * only one is used.
+ */
+ { USB_DEVICE_DETAILED(0xCE, USB_CLASS_HID,
+ USB_INTERFACE_SUBCLASS_BOOT,
+ USB_INTERFACE_PROTOCOL_MOUSE) },
{ USB_DEVICE_WACOM(0xD0) },
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
{ USB_DEVICE_WACOM(0x93) },
+ { USB_DEVICE_WACOM(0x97) },
{ USB_DEVICE_WACOM(0x9A) },
{ USB_DEVICE_WACOM(0x9F) },
{ USB_DEVICE_WACOM(0xE2) },
ts->get_pendown_state = pdata->get_pendown_state;
} else if (gpio_is_valid(pdata->gpio_pendown)) {
- err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+ err = gpio_request_one(pdata->gpio_pendown, GPIOF_IN,
+ "ads7846_pendown");
if (err) {
- dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
- pdata->gpio_pendown);
- return err;
- }
- err = gpio_direction_input(pdata->gpio_pendown);
- if (err) {
- dev_err(&spi->dev, "failed to setup pendown GPIO%d\n",
- pdata->gpio_pendown);
- gpio_free(pdata->gpio_pendown);
+ dev_err(&spi->dev,
+ "failed to request/setup pendown GPIO%d: %d\n",
+ pdata->gpio_pendown, err);
return err;
}
data = ac97c_readl(atmel_wm97xx, CBRHR);
value = data & 0x0fff;
- source = data & WM97XX_ADCSRC_MASK;
+ source = data & WM97XX_ADCSEL_MASK;
pen_down = (data & WM97XX_PEN_DOWN) >> 8;
if (source == WM97XX_ADCSEL_X)
}
module_exit(atmel_wm97xx_exit);
-MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("wm97xx continuous touch driver for Atmel AT91 and AVR32");
MODULE_LICENSE("GPL");
#define MXT_OBJECT_SIZE 6
/* Object types */
-#define MXT_DEBUG_DIAGNOSTIC 37
-#define MXT_GEN_MESSAGE 5
-#define MXT_GEN_COMMAND 6
-#define MXT_GEN_POWER 7
-#define MXT_GEN_ACQUIRE 8
-#define MXT_TOUCH_MULTI 9
-#define MXT_TOUCH_KEYARRAY 15
-#define MXT_TOUCH_PROXIMITY 23
-#define MXT_PROCI_GRIPFACE 20
-#define MXT_PROCG_NOISE 22
-#define MXT_PROCI_ONETOUCH 24
-#define MXT_PROCI_TWOTOUCH 27
-#define MXT_PROCI_GRIP 40
-#define MXT_PROCI_PALM 41
-#define MXT_SPT_COMMSCONFIG 18
-#define MXT_SPT_GPIOPWM 19
-#define MXT_SPT_SELFTEST 25
-#define MXT_SPT_CTECONFIG 28
-#define MXT_SPT_USERDATA 38
-#define MXT_SPT_DIGITIZER 43
-#define MXT_SPT_MESSAGECOUNT 44
-
-/* MXT_GEN_COMMAND field */
+#define MXT_DEBUG_DIAGNOSTIC_T37 37
+#define MXT_GEN_MESSAGE_T5 5
+#define MXT_GEN_COMMAND_T6 6
+#define MXT_GEN_POWER_T7 7
+#define MXT_GEN_ACQUIRE_T8 8
+#define MXT_GEN_DATASOURCE_T53 53
+#define MXT_TOUCH_MULTI_T9 9
+#define MXT_TOUCH_KEYARRAY_T15 15
+#define MXT_TOUCH_PROXIMITY_T23 23
+#define MXT_TOUCH_PROXKEY_T52 52
+#define MXT_PROCI_GRIPFACE_T20 20
+#define MXT_PROCG_NOISE_T22 22
+#define MXT_PROCI_ONETOUCH_T24 24
+#define MXT_PROCI_TWOTOUCH_T27 27
+#define MXT_PROCI_GRIP_T40 40
+#define MXT_PROCI_PALM_T41 41
+#define MXT_PROCI_TOUCHSUPPRESSION_T42 42
+#define MXT_PROCI_STYLUS_T47 47
+#define MXT_PROCG_NOISESUPPRESSION_T48 48
+#define MXT_SPT_COMMSCONFIG_T18 18
+#define MXT_SPT_GPIOPWM_T19 19
+#define MXT_SPT_SELFTEST_T25 25
+#define MXT_SPT_CTECONFIG_T28 28
+#define MXT_SPT_USERDATA_T38 38
+#define MXT_SPT_DIGITIZER_T43 43
+#define MXT_SPT_MESSAGECOUNT_T44 44
+#define MXT_SPT_CTECONFIG_T46 46
+
+/* MXT_GEN_COMMAND_T6 field */
#define MXT_COMMAND_RESET 0
#define MXT_COMMAND_BACKUPNV 1
#define MXT_COMMAND_CALIBRATE 2
#define MXT_COMMAND_REPORTALL 3
#define MXT_COMMAND_DIAGNOSTIC 5
-/* MXT_GEN_POWER field */
+/* MXT_GEN_POWER_T7 field */
#define MXT_POWER_IDLEACQINT 0
#define MXT_POWER_ACTVACQINT 1
#define MXT_POWER_ACTV2IDLETO 2
-/* MXT_GEN_ACQUIRE field */
+/* MXT_GEN_ACQUIRE_T8 field */
#define MXT_ACQUIRE_CHRGTIME 0
#define MXT_ACQUIRE_TCHDRIFT 2
#define MXT_ACQUIRE_DRIFTST 3
#define MXT_ACQUIRE_ATCHCALST 6
#define MXT_ACQUIRE_ATCHCALSTHR 7
-/* MXT_TOUCH_MULTI field */
+/* MXT_TOUCH_MULTI_T9 field */
#define MXT_TOUCH_CTRL 0
#define MXT_TOUCH_XORIGIN 1
#define MXT_TOUCH_YORIGIN 2
#define MXT_TOUCH_YEDGEDIST 29
#define MXT_TOUCH_JUMPLIMIT 30
-/* MXT_PROCI_GRIPFACE field */
+/* MXT_PROCI_GRIPFACE_T20 field */
#define MXT_GRIPFACE_CTRL 0
#define MXT_GRIPFACE_XLOGRIP 1
#define MXT_GRIPFACE_XHIGRIP 2
#define MXT_NOISE_FREQ4 15
#define MXT_NOISE_IDLEGCAFVALID 16
-/* MXT_SPT_COMMSCONFIG */
+/* MXT_SPT_COMMSCONFIG_T18 */
#define MXT_COMMS_CTRL 0
#define MXT_COMMS_CMD 1
-/* MXT_SPT_CTECONFIG field */
+/* MXT_SPT_CTECONFIG_T28 field */
#define MXT_CTE_CTRL 0
#define MXT_CTE_CMD 1
#define MXT_CTE_MODE 2
#define MXT_VOLTAGE_DEFAULT 2700000
#define MXT_VOLTAGE_STEP 10000
-/* Define for MXT_GEN_COMMAND */
+/* Define for MXT_GEN_COMMAND_T6 */
#define MXT_BOOT_VALUE 0xa5
#define MXT_BACKUP_VALUE 0x55
#define MXT_BACKUP_TIME 25 /* msec */
static bool mxt_object_readable(unsigned int type)
{
switch (type) {
- case MXT_GEN_MESSAGE:
- case MXT_GEN_COMMAND:
- case MXT_GEN_POWER:
- case MXT_GEN_ACQUIRE:
- case MXT_TOUCH_MULTI:
- case MXT_TOUCH_KEYARRAY:
- case MXT_TOUCH_PROXIMITY:
- case MXT_PROCI_GRIPFACE:
- case MXT_PROCG_NOISE:
- case MXT_PROCI_ONETOUCH:
- case MXT_PROCI_TWOTOUCH:
- case MXT_PROCI_GRIP:
- case MXT_PROCI_PALM:
- case MXT_SPT_COMMSCONFIG:
- case MXT_SPT_GPIOPWM:
- case MXT_SPT_SELFTEST:
- case MXT_SPT_CTECONFIG:
- case MXT_SPT_USERDATA:
+ case MXT_GEN_MESSAGE_T5:
+ case MXT_GEN_COMMAND_T6:
+ case MXT_GEN_POWER_T7:
+ case MXT_GEN_ACQUIRE_T8:
+ case MXT_GEN_DATASOURCE_T53:
+ case MXT_TOUCH_MULTI_T9:
+ case MXT_TOUCH_KEYARRAY_T15:
+ case MXT_TOUCH_PROXIMITY_T23:
+ case MXT_TOUCH_PROXKEY_T52:
+ case MXT_PROCI_GRIPFACE_T20:
+ case MXT_PROCG_NOISE_T22:
+ case MXT_PROCI_ONETOUCH_T24:
+ case MXT_PROCI_TWOTOUCH_T27:
+ case MXT_PROCI_GRIP_T40:
+ case MXT_PROCI_PALM_T41:
+ case MXT_PROCI_TOUCHSUPPRESSION_T42:
+ case MXT_PROCI_STYLUS_T47:
+ case MXT_PROCG_NOISESUPPRESSION_T48:
+ case MXT_SPT_COMMSCONFIG_T18:
+ case MXT_SPT_GPIOPWM_T19:
+ case MXT_SPT_SELFTEST_T25:
+ case MXT_SPT_CTECONFIG_T28:
+ case MXT_SPT_USERDATA_T38:
+ case MXT_SPT_DIGITIZER_T43:
+ case MXT_SPT_CTECONFIG_T46:
return true;
default:
return false;
static bool mxt_object_writable(unsigned int type)
{
switch (type) {
- case MXT_GEN_COMMAND:
- case MXT_GEN_POWER:
- case MXT_GEN_ACQUIRE:
- case MXT_TOUCH_MULTI:
- case MXT_TOUCH_KEYARRAY:
- case MXT_TOUCH_PROXIMITY:
- case MXT_PROCI_GRIPFACE:
- case MXT_PROCG_NOISE:
- case MXT_PROCI_ONETOUCH:
- case MXT_PROCI_TWOTOUCH:
- case MXT_PROCI_GRIP:
- case MXT_PROCI_PALM:
- case MXT_SPT_GPIOPWM:
- case MXT_SPT_SELFTEST:
- case MXT_SPT_CTECONFIG:
+ case MXT_GEN_COMMAND_T6:
+ case MXT_GEN_POWER_T7:
+ case MXT_GEN_ACQUIRE_T8:
+ case MXT_TOUCH_MULTI_T9:
+ case MXT_TOUCH_KEYARRAY_T15:
+ case MXT_TOUCH_PROXIMITY_T23:
+ case MXT_TOUCH_PROXKEY_T52:
+ case MXT_PROCI_GRIPFACE_T20:
+ case MXT_PROCG_NOISE_T22:
+ case MXT_PROCI_ONETOUCH_T24:
+ case MXT_PROCI_TWOTOUCH_T27:
+ case MXT_PROCI_GRIP_T40:
+ case MXT_PROCI_PALM_T41:
+ case MXT_PROCI_TOUCHSUPPRESSION_T42:
+ case MXT_PROCI_STYLUS_T47:
+ case MXT_PROCG_NOISESUPPRESSION_T48:
+ case MXT_SPT_COMMSCONFIG_T18:
+ case MXT_SPT_GPIOPWM_T19:
+ case MXT_SPT_SELFTEST_T25:
+ case MXT_SPT_CTECONFIG_T28:
+ case MXT_SPT_DIGITIZER_T43:
+ case MXT_SPT_CTECONFIG_T46:
return true;
default:
return false;
struct mxt_object *object;
u16 reg;
- object = mxt_get_object(data, MXT_GEN_MESSAGE);
+ object = mxt_get_object(data, MXT_GEN_MESSAGE_T5);
if (!object)
return -EINVAL;
reportid = message.reportid;
- /* whether reportid is thing of MXT_TOUCH_MULTI */
- object = mxt_get_object(data, MXT_TOUCH_MULTI);
+ /* whether reportid is thing of MXT_TOUCH_MULTI_T9 */
+ object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
if (!object)
goto end;
if (!mxt_object_writable(object->type))
continue;
- for (j = 0; j < object->size + 1; j++) {
+ for (j = 0;
+ j < (object->size + 1) * (object->instances + 1);
+ j++) {
config_offset = index + j;
if (config_offset > pdata->config_length) {
dev_err(dev, "Not enough config data!\n");
mxt_write_object(data, object->type, j,
pdata->config[config_offset]);
}
- index += object->size + 1;
+ index += (object->size + 1) * (object->instances + 1);
}
return 0;
u8 voltage;
/* Set touchscreen lines */
- mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_XSIZE,
+ mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_XSIZE,
pdata->x_line);
- mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_YSIZE,
+ mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_YSIZE,
pdata->y_line);
/* Set touchscreen orient */
- mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_ORIENT,
+ mxt_write_object(data, MXT_TOUCH_MULTI_T9, MXT_TOUCH_ORIENT,
pdata->orient);
/* Set touchscreen burst length */
- mxt_write_object(data, MXT_TOUCH_MULTI,
+ mxt_write_object(data, MXT_TOUCH_MULTI_T9,
MXT_TOUCH_BLEN, pdata->blen);
/* Set touchscreen threshold */
- mxt_write_object(data, MXT_TOUCH_MULTI,
+ mxt_write_object(data, MXT_TOUCH_MULTI_T9,
MXT_TOUCH_TCHTHR, pdata->threshold);
/* Set touchscreen resolution */
- mxt_write_object(data, MXT_TOUCH_MULTI,
+ mxt_write_object(data, MXT_TOUCH_MULTI_T9,
MXT_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff);
- mxt_write_object(data, MXT_TOUCH_MULTI,
+ mxt_write_object(data, MXT_TOUCH_MULTI_T9,
MXT_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8);
- mxt_write_object(data, MXT_TOUCH_MULTI,
+ mxt_write_object(data, MXT_TOUCH_MULTI_T9,
MXT_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff);
- mxt_write_object(data, MXT_TOUCH_MULTI,
+ mxt_write_object(data, MXT_TOUCH_MULTI_T9,
MXT_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8);
/* Set touchscreen voltage */
voltage = (pdata->voltage - MXT_VOLTAGE_DEFAULT) /
MXT_VOLTAGE_STEP;
- mxt_write_object(data, MXT_SPT_CTECONFIG,
+ mxt_write_object(data, MXT_SPT_CTECONFIG_T28,
MXT_CTE_VOLTAGE, voltage);
}
}
mxt_handle_pdata(data);
/* Backup to memory */
- mxt_write_object(data, MXT_GEN_COMMAND,
+ mxt_write_object(data, MXT_GEN_COMMAND_T6,
MXT_COMMAND_BACKUPNV,
MXT_BACKUP_VALUE);
msleep(MXT_BACKUP_TIME);
/* Soft reset */
- mxt_write_object(data, MXT_GEN_COMMAND,
+ mxt_write_object(data, MXT_GEN_COMMAND_T6,
MXT_COMMAND_RESET, 1);
msleep(MXT_RESET_TIME);
}
/* Change to the bootloader mode */
- mxt_write_object(data, MXT_GEN_COMMAND,
+ mxt_write_object(data, MXT_GEN_COMMAND_T6,
MXT_COMMAND_RESET, MXT_BOOT_VALUE);
msleep(MXT_RESET_TIME);
{
/* Touch enable */
mxt_write_object(data,
- MXT_TOUCH_MULTI, MXT_TOUCH_CTRL, 0x83);
+ MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
}
static void mxt_stop(struct mxt_data *data)
{
/* Touch disable */
mxt_write_object(data,
- MXT_TOUCH_MULTI, MXT_TOUCH_CTRL, 0);
+ MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
}
static int mxt_input_open(struct input_dev *dev)
struct input_dev *input_dev = data->input_dev;
/* Soft reset */
- mxt_write_object(data, MXT_GEN_COMMAND,
+ mxt_write_object(data, MXT_GEN_COMMAND_T6,
MXT_COMMAND_RESET, 1);
msleep(MXT_RESET_TIME);
memcpy(i2c_data + 1, value, len);
ret = i2c_master_send(client, i2c_data, len + 1);
- if (ret != 1) {
+ if (ret != len + 1) {
dev_err(&client->dev, "i2c write data cmd failed\n");
- return ret ? ret : -EIO;
+ return ret < 0 ? ret : -EIO;
}
return 0;
ts->client = client;
ts->input = input_dev;
+ ts->reset_pin = pdata->reset_pin;
+ ts->irq_pin = pdata->irq_pin;
snprintf(ts->phys, sizeof(ts->phys),
"%s/input0", dev_name(&client->dev));
return 0;
}
-static struct i2c_device_id cy8ctmg110_idtable[] = {
+static const struct i2c_device_id cy8ctmg110_idtable[] = {
{ CY8CTMG110_DRIVER_NAME, 1 },
{ }
};
*/
static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev)
{
- int err, i, found;
+ int found = 0;
+ int err, i;
u8 r8;
- found = -1;
-
for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) {
- if (found >= 0)
- break;
-
err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8);
if (err)
return err;
break;
}
}
- if (found < 0)
- return 0;
if (tsdev->vendor == PMIC_VENDOR_FS) {
- if (found && found > (MRSTOUCH_MAX_CHANNELS - 18))
+ if (found > MRSTOUCH_MAX_CHANNELS - 18)
return -ENOSPC;
} else {
- if (found && found > (MRSTOUCH_MAX_CHANNELS - 4))
+ if (found > MRSTOUCH_MAX_CHANNELS - 4)
return -ENOSPC;
}
+
return found;
}
x, y, p);
/* are samples valid */
- if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
- (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
- (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+ if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
+ (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
+ (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
goto up;
/* coordinate is good */
MODULE_AUTHOR("Cyril Chemparathy");
MODULE_DESCRIPTION("TNETV107X Touchscreen Driver");
-MODULE_ALIAS("platform: tnetv107x-ts");
+MODULE_ALIAS("platform:tnetv107x-ts");
MODULE_LICENSE("GPL");
static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
{
int timeout = 5 * delay;
+ bool wants_pen = adcsel & WM97XX_PEN_DOWN;
- if (!wm->pen_probably_down) {
+ if (wants_pen && !wm->pen_probably_down) {
u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
if (!(data & WM97XX_PEN_DOWN))
return RC_PENUP;
}
/* set up digitiser */
- if (adcsel & 0x8000)
- adcsel = ((adcsel & 0x7fff) + 3) << 12;
-
if (wm->mach_ops && wm->mach_ops->pre_sample)
wm->mach_ops->pre_sample(adcsel);
- wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
- adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK)
+ | WM97XX_POLL | WM97XX_DELAY(delay));
/* wait 3 AC97 time slots + delay for conversion */
poll_delay(delay);
wm->mach_ops->post_sample(adcsel);
/* check we have correct sample */
- if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
- dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
- *sample & WM97XX_ADCSEL_MASK);
+ if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+ dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x",
+ adcsel & WM97XX_ADCSEL_MASK,
+ *sample & WM97XX_ADCSEL_MASK);
return RC_PENUP;
}
- if (!(*sample & WM97XX_PEN_DOWN)) {
+ if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
wm->pen_probably_down = 0;
return RC_PENUP;
}
{
int rc;
- rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X, &data->x);
+ rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x);
if (rc != RC_VALID)
return rc;
- rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y);
+ rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y);
if (rc != RC_VALID)
return rc;
if (pil) {
- rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES, &data->p);
+ rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN, &data->p);
if (rc != RC_VALID)
return rc;
} else
static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
{
int timeout = 5 * delay;
+ bool wants_pen = adcsel & WM97XX_PEN_DOWN;
- if (!wm->pen_probably_down) {
+ if (wants_pen && !wm->pen_probably_down) {
u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
if (!(data & WM97XX_PEN_DOWN))
return RC_PENUP;
}
/* set up digitiser */
- if (adcsel & 0x8000)
- adcsel = ((adcsel & 0x7fff) + 3) << 12;
-
if (wm->mach_ops && wm->mach_ops->pre_sample)
wm->mach_ops->pre_sample(adcsel);
- wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
- adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK)
+ | WM97XX_POLL | WM97XX_DELAY(delay));
/* wait 3 AC97 time slots + delay for conversion */
poll_delay(delay);
wm->mach_ops->post_sample(adcsel);
/* check we have correct sample */
- if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
- dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
- *sample & WM97XX_ADCSEL_MASK);
+ if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+ dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x",
+ adcsel & WM97XX_ADCSEL_MASK,
+ *sample & WM97XX_ADCSEL_MASK);
return RC_PENUP;
}
- if (!(*sample & WM97XX_PEN_DOWN)) {
+ if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
wm->pen_probably_down = 0;
return RC_PENUP;
}
if (rc != RC_VALID)
return rc;
} else {
- rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X, &data->x);
+ rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN,
+ &data->x);
if (rc != RC_VALID)
return rc;
- rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y);
+ rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN,
+ &data->y);
if (rc != RC_VALID)
return rc;
if (pil && !five_wire) {
- rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES,
+ rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN,
&data->p);
if (rc != RC_VALID)
return rc;
{
u16 dig1;
int timeout = 5 * delay;
+ bool wants_pen = adcsel & WM97XX_PEN_DOWN;
- if (!wm->pen_probably_down) {
+ if (wants_pen && !wm->pen_probably_down) {
u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
if (!(data & WM97XX_PEN_DOWN))
return RC_PENUP;
}
/* set up digitiser */
- if (adcsel & 0x8000)
- adcsel = 1 << ((adcsel & 0x7fff) + 3);
-
dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
dig1 &= ~WM9713_ADCSEL_MASK;
+ /* WM97XX_ADCSEL_* channels need to be converted to WM9713 format */
+ dig1 |= 1 << ((adcsel & WM97XX_ADCSEL_MASK) >> 12);
if (wm->mach_ops && wm->mach_ops->pre_sample)
wm->mach_ops->pre_sample(adcsel);
- wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | adcsel | WM9713_POLL);
+ wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | WM9713_POLL);
/* wait 3 AC97 time slots + delay for conversion */
poll_delay(delay);
wm->mach_ops->post_sample(adcsel);
/* check we have correct sample */
- if ((*sample & WM97XX_ADCSRC_MASK) != ffs(adcsel >> 1) << 12) {
- dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
- *sample & WM97XX_ADCSRC_MASK);
+ if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+ dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x",
+ adcsel & WM97XX_ADCSEL_MASK,
+ *sample & WM97XX_ADCSEL_MASK);
return RC_PENUP;
}
- if (!(*sample & WM97XX_PEN_DOWN)) {
+ if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
wm->pen_probably_down = 0;
return RC_PENUP;
}
if (rc != RC_VALID)
return rc;
} else {
- rc = wm9713_poll_sample(wm, WM9713_ADCSEL_X, &data->x);
+ rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x);
if (rc != RC_VALID)
return rc;
- rc = wm9713_poll_sample(wm, WM9713_ADCSEL_Y, &data->y);
+ rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y);
if (rc != RC_VALID)
return rc;
if (pil) {
- rc = wm9713_poll_sample(wm, WM9713_ADCSEL_PRES,
+ rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN,
&data->p);
if (rc != RC_VALID)
return rc;
x, y, p);
/* are samples valid */
- if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
- (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
- (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+ if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
+ (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
+ (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
goto up;
/* coordinate is good */
#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */
#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */
-#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + ev, len) /* get event bits */
-#define EVIOCGABS(abs) _IOR('E', 0x40 + abs, struct input_absinfo) /* get abs value/limits */
-#define EVIOCSABS(abs) _IOW('E', 0xc0 + abs, struct input_absinfo) /* set abs value/limits */
+#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */
+#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */
+#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */
#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */
#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */
--- /dev/null
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <chudson@kionix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#ifndef __KXTJ9_H__
+#define __KXTJ9_H__
+
+#define KXTJ9_I2C_ADDR 0x0F
+
+struct kxtj9_platform_data {
+ unsigned int min_interval; /* minimum poll interval (in milli-seconds) */
+
+ /*
+ * By default, x is axis 0, y is axis 1, z is axis 2; these can be
+ * changed to account for sensor orientation within the host device.
+ */
+ u8 axis_map_x;
+ u8 axis_map_y;
+ u8 axis_map_z;
+
+ /*
+ * Each axis can be negated to account for sensor orientation within
+ * the host device.
+ */
+ bool negate_x;
+ bool negate_y;
+ bool negate_z;
+
+ /* CTRL_REG1: set resolution, g-range, data ready enable */
+ /* Output resolution: 8-bit valid or 12-bit valid */
+ #define RES_8BIT 0
+ #define RES_12BIT (1 << 6)
+ u8 res_12bit;
+ /* Output g-range: +/-2g, 4g, or 8g */
+ #define KXTJ9_G_2G 0
+ #define KXTJ9_G_4G (1 << 3)
+ #define KXTJ9_G_8G (1 << 4)
+ u8 g_range;
+
+ /* DATA_CTRL_REG: controls the output data rate of the part */
+ #define ODR12_5F 0
+ #define ODR25F 1
+ #define ODR50F 2
+ #define ODR100F 3
+ #define ODR200F 4
+ #define ODR400F 5
+ #define ODR800F 6
+ u8 data_odr_init;
+
+ int (*init)(void);
+ void (*exit)(void);
+ int (*power_on)(void);
+ int (*power_off)(void);
+};
+#endif /* __KXTJ9_H__ */
#define WM97XX_ADCSEL_X 0x1000 /* x coord measurement */
#define WM97XX_ADCSEL_Y 0x2000 /* y coord measurement */
#define WM97XX_ADCSEL_PRES 0x3000 /* pressure measurement */
-#define WM97XX_ADCSEL_MASK 0x7000
+#define WM97XX_AUX_ID1 0x4000
+#define WM97XX_AUX_ID2 0x5000
+#define WM97XX_AUX_ID3 0x6000
+#define WM97XX_AUX_ID4 0x7000
+#define WM97XX_ADCSEL_MASK 0x7000 /* ADC selection mask */
#define WM97XX_COO 0x0800 /* enable coordinate mode */
#define WM97XX_CTC 0x0400 /* enable continuous mode */
#define WM97XX_CM_RATE_93 0x0000 /* 93.75Hz continuous rate */
#define WM97XX_PRP_DET_DIG 0xc000 /* setect on, digitise on */
#define WM97XX_RPR 0x2000 /* wake up on pen down */
#define WM97XX_PEN_DOWN 0x8000 /* pen is down */
-#define WM97XX_ADCSRC_MASK 0x7000 /* ADC source mask */
-
-#define WM97XX_AUX_ID1 0x8001
-#define WM97XX_AUX_ID2 0x8002
-#define WM97XX_AUX_ID3 0x8003
-#define WM97XX_AUX_ID4 0x8004
-
/* WM9712 Bits */
#define WM9712_45W 0x1000 /* set for 5-wire touchscreen */
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff