S: 1098 VA Amsterdam
S: The Netherlands
+N: Jiri Kosina
+E: jikos@jikos.cz
+E: jkosina@suse.cz
+D: Generic HID layer - original code split, fixes
+D: Various ACPI fixes, keeping correct battery state through suspend
+D: various lockdep annotations, autofs and other random bugfixes
+S: Prague, Czech Republic
+
N: Gene Kozin
E: 74604.152@compuserve.com
W: http://www.sangoma.com
--- /dev/null
+What: /debug/pktcdvd/pktcdvd[0-7]
+Date: Oct. 2006
+KernelVersion: 2.6.19
+Contact: Thomas Maier <balagi@justmail.de>
+Description:
+
+debugfs interface
+-----------------
+
+The pktcdvd module (packet writing driver) creates
+these files in debugfs:
+
+/debug/pktcdvd/pktcdvd[0-7]/
+ info (0444) Lots of human readable driver
+ statistics and infos. Multiple lines!
+
+Example:
+-------
+
+cat /debug/pktcdvd/pktcdvd0/info
--- /dev/null
+What: /sys/class/pktcdvd/
+Date: Oct. 2006
+KernelVersion: 2.6.19
+Contact: Thomas Maier <balagi@justmail.de>
+Description:
+
+sysfs interface
+---------------
+
+The pktcdvd module (packet writing driver) creates
+these files in the sysfs:
+(<devid> is in format major:minor )
+
+/sys/class/pktcdvd/
+ add (0200) Write a block device id (major:minor)
+ to create a new pktcdvd device and map
+ it to the block device.
+
+ remove (0200) Write the pktcdvd device id (major:minor)
+ to it to remove the pktcdvd device.
+
+ device_map (0444) Shows the device mapping in format:
+ pktcdvd[0-7] <pktdevid> <blkdevid>
+
+/sys/class/pktcdvd/pktcdvd[0-7]/
+ dev (0444) Device id
+ uevent (0200) To send an uevent.
+
+/sys/class/pktcdvd/pktcdvd[0-7]/stat/
+ packets_started (0444) Number of started packets.
+ packets_finished (0444) Number of finished packets.
+
+ kb_written (0444) kBytes written.
+ kb_read (0444) kBytes read.
+ kb_read_gather (0444) kBytes read to fill write packets.
+
+ reset (0200) Write any value to it to reset
+ pktcdvd device statistic values, like
+ bytes read/written.
+
+/sys/class/pktcdvd/pktcdvd[0-7]/write_queue/
+ size (0444) Contains the size of the bio write
+ queue.
+
+ congestion_off (0644) If bio write queue size is below
+ this mark, accept new bio requests
+ from the block layer.
+
+ congestion_on (0644) If bio write queue size is higher
+ as this mark, do no longer accept
+ bio write requests from the block
+ layer and wait till the pktcdvd
+ device has processed enough bio's
+ so that bio write queue size is
+ below congestion off mark.
+ A value of <= 0 disables congestion
+ control.
+
+
+Example:
+--------
+To use the pktcdvd sysfs interface directly, you can do:
+
+# create a new pktcdvd device mapped to /dev/hdc
+echo "22:0" >/sys/class/pktcdvd/add
+cat /sys/class/pktcdvd/device_map
+# assuming device pktcdvd0 was created, look at stat's
+cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written
+# print the device id of the mapped block device
+fgrep pktcdvd0 /sys/class/pktcdvd/device_map
+# remove device, using pktcdvd0 device id 253:0
+echo "253:0" >/sys/class/pktcdvd/remove
benefit of warning you when you're nesting your functions too deep.
Heed that warning.
+The preferred way to ease multiple indentation levels in a switch statement is
+to align the "switch" and its subordinate "case" labels in the same column
+instead of "double-indenting" the "case" labels. E.g.:
+
+ switch (suffix) {
+ case 'G':
+ case 'g':
+ mem <<= 30;
+ break;
+ case 'M':
+ case 'm':
+ mem <<= 20;
+ break;
+ case 'K':
+ case 'k':
+ mem <<= 10;
+ /* fall through */
+ default:
+ break;
+ }
+
+
Don't put multiple statements on a single line unless you have
something to hide:
if (condition) do_this;
do_something_everytime;
+Don't put multiple assignments on a single line either. Kernel coding style
+is super simple. Avoid tricky expressions.
+
Outside of comments, documentation and except in Kconfig, spaces are never
used for indentation, and the above example is deliberately broken.
next_statement;
}
- Chapter 3: Placing Braces
+ Chapter 3: Placing Braces and Spaces
The other issue that always comes up in C styling is the placement of
braces. Unlike the indent size, there are few technical reasons to
we do y
}
+This applies to all non-function statement blocks (if, switch, for,
+while, do). E.g.:
+
+ switch (action) {
+ case KOBJ_ADD:
+ return "add";
+ case KOBJ_REMOVE:
+ return "remove";
+ case KOBJ_CHANGE:
+ return "change";
+ default:
+ return NULL;
+ }
+
However, there is one special case, namely functions: they have the
opening brace at the beginning of the next line, thus:
25-line terminal screens here), you have more empty lines to put
comments on.
+ 3.1: Spaces
+
+Linux kernel style for use of spaces depends (mostly) on
+function-versus-keyword usage. Use a space after (most) keywords. The
+notable exceptions are sizeof, typeof, alignof, and __attribute__, which look
+somewhat like functions (and are usually used with parentheses in Linux,
+although they are not required in the language, as in: "sizeof info" after
+"struct fileinfo info;" is declared).
+
+So use a space after these keywords:
+ if, switch, case, for, do, while
+but not with sizeof, typeof, alignof, or __attribute__. E.g.,
+ s = sizeof(struct file);
+
+Do not add spaces around (inside) parenthesized expressions. This example is
+*bad*:
+
+ s = sizeof( struct file );
+
+When declaring pointer data or a function that returns a pointer type, the
+preferred use of '*' is adjacent to the data name or function name and not
+adjacent to the type name. Examples:
+
+ char *linux_banner;
+ unsigned long long memparse(char *ptr, char **retptr);
+ char *match_strdup(substring_t *s);
+
+Use one space around (on each side of) most binary and ternary operators,
+such as any of these:
+
+ = + - < > * / % | & ^ <= >= == != ? :
+
+but no space after unary operators:
+ & * + - ~ ! sizeof typeof alignof __attribute__ defined
+
+no space before the postfix increment & decrement unary operators:
+ ++ --
+
+no space after the prefix increment & decrement unary operators:
+ ++ --
+
+and no space around the '.' and "->" structure member operators.
+
Chapter 4: Naming
If you are afraid to mix up your local variable names, you have another
problem, which is called the function-growth-hormone-imbalance syndrome.
-See next chapter.
+See chapter 6 (Functions).
Chapter 5: Typedefs
and it gets confused. You know you're brilliant, but maybe you'd like
to understand what you did 2 weeks from now.
+In source files, separate functions with one blank line. If the function is
+exported, the EXPORT* macro for it should follow immediately after the closing
+function brace line. E.g.:
+
+int system_is_up(void)
+{
+ return system_state == SYSTEM_RUNNING;
+}
+EXPORT_SYMBOL(system_is_up);
+
+In function prototypes, include parameter names with their data types.
+Although this is not required by the C language, it is preferred in Linux
+because it is a simple way to add valuable information for the reader.
+
Chapter 7: Centralized exiting of functions
Generally, you want your comments to tell WHAT your code does, not HOW.
Also, try to avoid putting comments inside a function body: if the
function is so complex that you need to separately comment parts of it,
-you should probably go back to chapter 5 for a while. You can make
+you should probably go back to chapter 6 for a while. You can make
small comments to note or warn about something particularly clever (or
ugly), but try to avoid excess. Instead, put the comments at the head
of the function, telling people what it does, and possibly WHY it does
it.
-When commenting the kernel API functions, please use the kerneldoc format.
+When commenting the kernel API functions, please use the kernel-doc format.
See the files Documentation/kernel-doc-nano-HOWTO.txt and scripts/kernel-doc
for details.
+Linux style for comments is the C89 "/* ... */" style.
+Don't use C99-style "// ..." comments.
+
+The preferred style for long (multi-line) comments is:
+
+ /*
+ * This is the preferred style for multi-line
+ * comments in the Linux kernel source code.
+ * Please use it consistently.
+ *
+ * Description: A column of asterisks on the left side,
+ * with beginning and ending almost-blank lines.
+ */
+
+It's also important to comment data, whether they are basic types or derived
+types. To this end, use just one data declaration per line (no commas for
+multiple data declarations). This leaves you room for a small comment on each
+item, explaining its use.
+
+
Chapter 9: You've made a mess of it
That's OK, we all do. You've probably been told by your long-time Unix
http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/
--
-Last updated on 30 April 2006.
+Last updated on 2006-December-06.
-->
</sect1>
</chapter>
+
+ <chapter id="input_subsystem">
+ <title>Input Subsystem</title>
+!Iinclude/linux/input.h
+!Edrivers/input/input.c
+!Edrivers/input/ff-core.c
+!Edrivers/input/ff-memless.c
+ </chapter>
</book>
See Documentation/ABI/README for more information.
20: Check that it all passes `make headers_check'.
+
+21: Has been checked with injection of at least slab and page-allocation
+ fauilures. See Documentation/fault-injection/.
+
+ If the new code is substantial, addition of subsystem-specific fault
+ injection might be appropriate.
* Copyright (C) Balbir Singh, IBM Corp. 2006
* Copyright (c) Jay Lan, SGI. 2006
*
+ * Compile with
+ * gcc -I/usr/src/linux/include getdelays.c -o getdelays
*/
#include <stdio.h>
#define NLA_DATA(na) ((void *)((char*)(na) + NLA_HDRLEN))
#define NLA_PAYLOAD(len) (len - NLA_HDRLEN)
-#define err(code, fmt, arg...) do { printf(fmt, ##arg); exit(code); } while (0)
-int done = 0;
-int rcvbufsz=0;
-
- char name[100];
-int dbg=0, print_delays=0;
+#define err(code, fmt, arg...) \
+ do { \
+ fprintf(stderr, fmt, ##arg); \
+ exit(code); \
+ } while (0)
+
+int done;
+int rcvbufsz;
+char name[100];
+int dbg;
+int print_delays;
+int print_io_accounting;
__u64 stime, utime;
+
#define PRINTF(fmt, arg...) { \
if (dbg) { \
printf(fmt, ##arg); \
if (rcvbufsz)
if (setsockopt(fd, SOL_SOCKET, SO_RCVBUF,
&rcvbufsz, sizeof(rcvbufsz)) < 0) {
- printf("Unable to set socket rcv buf size to %d\n",
- rcvbufsz);
+ fprintf(stderr, "Unable to set socket rcv buf size "
+ "to %d\n",
+ rcvbufsz);
return -1;
}
"count", "delay total", t->swapin_count, t->swapin_delay_total);
}
+void print_ioacct(struct taskstats *t)
+{
+ printf("%s: read=%llu, write=%llu, cancelled_write=%llu\n",
+ t->ac_comm,
+ (unsigned long long)t->read_bytes,
+ (unsigned long long)t->write_bytes,
+ (unsigned long long)t->cancelled_write_bytes);
+}
+
int main(int argc, char *argv[])
{
int c, rc, rep_len, aggr_len, len2, cmd_type;
struct msgtemplate msg;
while (1) {
- c = getopt(argc, argv, "dw:r:m:t:p:v:l");
+ c = getopt(argc, argv, "diw:r:m:t:p:v:l");
if (c < 0)
break;
printf("print delayacct stats ON\n");
print_delays = 1;
break;
+ case 'i':
+ printf("printing IO accounting\n");
+ print_io_accounting = 1;
+ break;
case 'w':
strncpy(logfile, optarg, MAX_FILENAME);
printf("write to file %s\n", logfile);
if (!tid)
err(1, "Invalid tgid\n");
cmd_type = TASKSTATS_CMD_ATTR_TGID;
- print_delays = 1;
break;
case 'p':
tid = atoi(optarg);
if (!tid)
err(1, "Invalid pid\n");
cmd_type = TASKSTATS_CMD_ATTR_PID;
- print_delays = 1;
break;
case 'v':
printf("debug on\n");
mypid = getpid();
id = get_family_id(nl_sd);
if (!id) {
- printf("Error getting family id, errno %d", errno);
+ fprintf(stderr, "Error getting family id, errno %d\n", errno);
goto err;
}
PRINTF("family id %d\n", id);
&cpumask, strlen(cpumask) + 1);
PRINTF("Sent register cpumask, retval %d\n", rc);
if (rc < 0) {
- printf("error sending register cpumask\n");
+ fprintf(stderr, "error sending register cpumask\n");
goto err;
}
}
cmd_type, &tid, sizeof(__u32));
PRINTF("Sent pid/tgid, retval %d\n", rc);
if (rc < 0) {
- printf("error sending tid/tgid cmd\n");
+ fprintf(stderr, "error sending tid/tgid cmd\n");
goto done;
}
}
PRINTF("received %d bytes\n", rep_len);
if (rep_len < 0) {
- printf("nonfatal reply error: errno %d\n", errno);
+ fprintf(stderr, "nonfatal reply error: errno %d\n",
+ errno);
continue;
}
if (msg.n.nlmsg_type == NLMSG_ERROR ||
!NLMSG_OK((&msg.n), rep_len)) {
struct nlmsgerr *err = NLMSG_DATA(&msg);
- printf("fatal reply error, errno %d\n", err->error);
+ fprintf(stderr, "fatal reply error, errno %d\n",
+ err->error);
goto done;
}
count++;
if (print_delays)
print_delayacct((struct taskstats *) NLA_DATA(na));
+ if (print_io_accounting)
+ print_ioacct((struct taskstats *) NLA_DATA(na));
if (fd) {
if (write(fd, NLA_DATA(na), na->nla_len) < 0) {
err(1,"write error\n");
goto done;
break;
default:
- printf("Unknown nested nla_type %d\n", na->nla_type);
+ fprintf(stderr, "Unknown nested"
+ " nla_type %d\n",
+ na->nla_type);
break;
}
len2 += NLA_ALIGN(na->nla_len);
break;
default:
- printf("Unknown nla_type %d\n", na->nla_type);
+ fprintf(stderr, "Unknown nla_type %d\n",
+ na->nla_type);
break;
}
na = (struct nlattr *) (GENLMSG_DATA(&msg) + len);
lines associated with 'mm'.
This interface is used to handle whole address space
- page table operations such as what happens during
- fork, exit, and exec.
+ page table operations such as what happens during exit and exec.
+
+2) void flush_cache_dup_mm(struct mm_struct *mm)
+
+ This interface flushes an entire user address space from
+ the caches. That is, after running, there will be no cache
+ lines associated with 'mm'.
+
+ This interface is used to handle whole address space
+ page table operations such as what happens during fork.
+
+ This option is separate from flush_cache_mm to allow some
+ optimizations for VIPT caches.
-2) void flush_cache_range(struct vm_area_struct *vma,
+3) void flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
Here we are flushing a specific range of (user) virtual
call flush_cache_page (see below) for each entry which may be
modified.
-3) void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)
+4) void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)
This time we need to remove a PAGE_SIZE sized range
from the cache. The 'vma' is the backing structure used by
This is used primarily during fault processing.
-4) void flush_cache_kmaps(void)
+5) void flush_cache_kmaps(void)
This routine need only be implemented if the platform utilizes
highmem. It will be called right before all of the kmaps
This routing should be implemented in asm/highmem.h
-5) void flush_cache_vmap(unsigned long start, unsigned long end)
+6) void flush_cache_vmap(unsigned long start, unsigned long end)
void flush_cache_vunmap(unsigned long start, unsigned long end)
Here in these two interfaces we are flushing a specific range
to create an ext2 filesystem on the disc.
+Using the pktcdvd sysfs interface
+---------------------------------
+
+Since Linux 2.6.19, the pktcdvd module has a sysfs interface
+and can be controlled by it. For example the "pktcdvd" tool uses
+this interface. (see http://people.freenet.de/BalaGi#pktcdvd )
+
+"pktcdvd" works similar to "pktsetup", e.g.:
+
+ # pktcdvd -a dev_name /dev/hdc
+ # mkudffs /dev/pktcdvd/dev_name
+ # mount -t udf -o rw,noatime /dev/pktcdvd/dev_name /dvdram
+ # cp files /dvdram
+ # umount /dvdram
+ # pktcdvd -r dev_name
+
+
+For a description of the sysfs interface look into the file:
+
+ Documentation/ABI/testing/sysfs-block-pktcdvd
+
+
+Using the pktcdvd debugfs interface
+-----------------------------------
+
+To read pktcdvd device infos in human readable form, do:
+
+ # cat /debug/pktcdvd/pktcdvd[0-7]/info
+
+For a description of the debugfs interface look into the file:
+
+ Documentation/ABI/testing/debugfs-pktcdvd
+
+
+
Links
-----
1. General Information
=======================
-The CPUFreq core code is located in linux/kernel/cpufreq.c. This
+The CPUFreq core code is located in drivers/cpufreq/cpufreq.c. This
cpufreq code offers a standardized interface for the CPUFreq
architecture drivers (those pieces of code that do actual
frequency transitions), as well as to "notifiers". These are device
- ves1x93 : Alps BSRV2 (ves1893 demodulator) and dbox2 (ves1993)
- cx24110 : Conexant HM1221/HM1811 (cx24110 or cx24106 demod, cx24108 PLL)
- grundig_29504-491 : Grundig 29504-491 (Philips TDA8083 demodulator), tsa5522 PLL
- - mt312 : Zarlink mt312 or Mitel vp310 demodulator, sl1935 or tsa5059 PLL
+ - mt312 : Zarlink mt312 or Mitel vp310 demodulator, sl1935 or tsa5059 PLLi, Technisat Sky2Pc with bios Rev. 2.3
- stv0299 : Alps BSRU6 (tsa5059 PLL), LG TDQB-S00x (tsa5059 PLL),
LG TDQF-S001F (sl1935 PLL), Philips SU1278 (tua6100 PLL),
- Philips SU1278SH (tsa5059 PLL), Samsung TBMU24112IMB
+ Philips SU1278SH (tsa5059 PLL), Samsung TBMU24112IMB, Technisat Sky2Pc with bios Rev. 2.6
DVB-C:
- ves1820 : various (ves1820 demodulator, sp5659c or spXXXX PLL)
- at76c651 : Atmel AT76c651(B) with DAT7021 PLL
--- /dev/null
+#!/bin/bash
+
+echo 1 > /proc/self/make-it-fail
+exec $*
--- /dev/null
+#!/bin/bash
+#
+# Usage: failmodule <failname> <modulename> [stacktrace-depth]
+#
+# <failname>: "failslab", "fail_alloc_page", or "fail_make_request"
+#
+# <modulename>: module name that you want to inject faults.
+#
+# [stacktrace-depth]: the maximum number of stacktrace walking allowed
+#
+
+STACKTRACE_DEPTH=5
+if [ $# -gt 2 ]; then
+ STACKTRACE_DEPTH=$3
+fi
+
+if [ ! -d /debug/$1 ]; then
+ echo "Fault-injection $1 does not exist" >&2
+ exit 1
+fi
+if [ ! -d /sys/module/$2 ]; then
+ echo "Module $2 does not exist" >&2
+ exit 1
+fi
+
+# Disable any fault injection
+echo 0 > /debug/$1/stacktrace-depth
+
+echo `cat /sys/module/$2/sections/.text` > /debug/$1/require-start
+echo `cat /sys/module/$2/sections/.exit.text` > /debug/$1/require-end
+echo $STACKTRACE_DEPTH > /debug/$1/stacktrace-depth
--- /dev/null
+Fault injection capabilities infrastructure
+===========================================
+
+See also drivers/md/faulty.c and "every_nth" module option for scsi_debug.
+
+
+Available fault injection capabilities
+--------------------------------------
+
+o failslab
+
+ injects slab allocation failures. (kmalloc(), kmem_cache_alloc(), ...)
+
+o fail_page_alloc
+
+ injects page allocation failures. (alloc_pages(), get_free_pages(), ...)
+
+o fail_make_request
+
+ injects disk IO errors on devices permitted by setting
+ /sys/block/<device>/make-it-fail or
+ /sys/block/<device>/<partition>/make-it-fail. (generic_make_request())
+
+Configure fault-injection capabilities behavior
+-----------------------------------------------
+
+o debugfs entries
+
+fault-inject-debugfs kernel module provides some debugfs entries for runtime
+configuration of fault-injection capabilities.
+
+- /debug/fail*/probability:
+
+ likelihood of failure injection, in percent.
+ Format: <percent>
+
+ Note that one-failure-per-hundred is a very high error rate
+ for some testcases. Consider setting probability=100 and configure
+ /debug/fail*/interval for such testcases.
+
+- /debug/fail*/interval:
+
+ specifies the interval between failures, for calls to
+ should_fail() that pass all the other tests.
+
+ Note that if you enable this, by setting interval>1, you will
+ probably want to set probability=100.
+
+- /debug/fail*/times:
+
+ specifies how many times failures may happen at most.
+ A value of -1 means "no limit".
+
+- /debug/fail*/space:
+
+ specifies an initial resource "budget", decremented by "size"
+ on each call to should_fail(,size). Failure injection is
+ suppressed until "space" reaches zero.
+
+- /debug/fail*/verbose
+
+ Format: { 0 | 1 | 2 }
+ specifies the verbosity of the messages when failure is
+ injected. '0' means no messages; '1' will print only a single
+ log line per failure; '2' will print a call trace too -- useful
+ to debug the problems revealed by fault injection.
+
+- /debug/fail*/task-filter:
+
+ Format: { 'Y' | 'N' }
+ A value of 'N' disables filtering by process (default).
+ Any positive value limits failures to only processes indicated by
+ /proc/<pid>/make-it-fail==1.
+
+- /debug/fail*/require-start:
+- /debug/fail*/require-end:
+- /debug/fail*/reject-start:
+- /debug/fail*/reject-end:
+
+ specifies the range of virtual addresses tested during
+ stacktrace walking. Failure is injected only if some caller
+ in the walked stacktrace lies within the required range, and
+ none lies within the rejected range.
+ Default required range is [0,ULONG_MAX) (whole of virtual address space).
+ Default rejected range is [0,0).
+
+- /debug/fail*/stacktrace-depth:
+
+ specifies the maximum stacktrace depth walked during search
+ for a caller within [require-start,require-end) OR
+ [reject-start,reject-end).
+
+- /debug/fail_page_alloc/ignore-gfp-highmem:
+
+ Format: { 'Y' | 'N' }
+ default is 'N', setting it to 'Y' won't inject failures into
+ highmem/user allocations.
+
+- /debug/failslab/ignore-gfp-wait:
+- /debug/fail_page_alloc/ignore-gfp-wait:
+
+ Format: { 'Y' | 'N' }
+ default is 'N', setting it to 'Y' will inject failures
+ only into non-sleep allocations (GFP_ATOMIC allocations).
+
+o Boot option
+
+In order to inject faults while debugfs is not available (early boot time),
+use the boot option:
+
+ failslab=
+ fail_page_alloc=
+ fail_make_request=<interval>,<probability>,<space>,<times>
+
+How to add new fault injection capability
+-----------------------------------------
+
+o #include <linux/fault-inject.h>
+
+o define the fault attributes
+
+ DECLARE_FAULT_INJECTION(name);
+
+ Please see the definition of struct fault_attr in fault-inject.h
+ for details.
+
+o provide a way to configure fault attributes
+
+- boot option
+
+ If you need to enable the fault injection capability from boot time, you can
+ provide boot option to configure it. There is a helper function for it:
+
+ setup_fault_attr(attr, str);
+
+- debugfs entries
+
+ failslab, fail_page_alloc, and fail_make_request use this way.
+ Helper functions:
+
+ init_fault_attr_entries(entries, attr, name);
+ void cleanup_fault_attr_entries(entries);
+
+- module parameters
+
+ If the scope of the fault injection capability is limited to a
+ single kernel module, it is better to provide module parameters to
+ configure the fault attributes.
+
+o add a hook to insert failures
+
+ Upon should_fail() returning true, client code should inject a failure.
+
+ should_fail(attr, size);
+
+Application Examples
+--------------------
+
+o inject slab allocation failures into module init/cleanup code
+
+------------------------------------------------------------------------------
+#!/bin/bash
+
+FAILCMD=Documentation/fault-injection/failcmd.sh
+BLACKLIST="root_plug evbug"
+
+FAILNAME=failslab
+echo Y > /debug/$FAILNAME/task-filter
+echo 10 > /debug/$FAILNAME/probability
+echo 100 > /debug/$FAILNAME/interval
+echo -1 > /debug/$FAILNAME/times
+echo 2 > /debug/$FAILNAME/verbose
+echo 1 > /debug/$FAILNAME/ignore-gfp-wait
+
+blacklist()
+{
+ echo $BLACKLIST | grep $1 > /dev/null 2>&1
+}
+
+oops()
+{
+ dmesg | grep BUG > /dev/null 2>&1
+}
+
+find /lib/modules/`uname -r` -name '*.ko' -exec basename {} .ko \; |
+ while read i
+ do
+ oops && exit 1
+
+ if ! blacklist $i
+ then
+ echo inserting $i...
+ bash $FAILCMD modprobe $i
+ fi
+ done
+
+lsmod | awk '{ if ($3 == 0) { print $1 } }' |
+ while read i
+ do
+ oops && exit 1
+
+ if ! blacklist $i
+ then
+ echo removing $i...
+ bash $FAILCMD modprobe -r $i
+ fi
+ done
+
+------------------------------------------------------------------------------
+
+o inject slab allocation failures only for a specific module
+
+------------------------------------------------------------------------------
+#!/bin/bash
+
+FAILMOD=Documentation/fault-injection/failmodule.sh
+
+echo injecting errors into the module $1...
+
+modprobe $1
+bash $FAILMOD failslab $1 10
+echo 25 > /debug/failslab/probability
+
+------------------------------------------------------------------------------
+
---------------------------
-What: I2C interface of the it87 driver
-When: January 2007
-Why: The ISA interface is faster and should be always available. The I2C
- probing is also known to cause trouble in at least one case (see
- bug #5889.)
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
---------------------------
-What: i2c-ite and i2c-algo-ite drivers
-When: September 2006
-Why: These drivers never compiled since they were added to the kernel
- tree 5 years ago. This feature removal can be reevaluated if
- someone shows interest in the drivers, fixes them and takes over
- maintenance.
- http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
-What: Bridge netfilter deferred IPv4/IPv6 output hook calling
-When: January 2007
-Why: The deferred output hooks are a layering violation causing unusual
- and broken behaviour on bridge devices. Examples of things they
- break include QoS classifation using the MARK or CLASSIFY targets,
- the IPsec policy match and connection tracking with VLANs on a
- bridge. Their only use is to enable bridge output port filtering
- within iptables with the physdev match, which can also be done by
- combining iptables and ebtables using netfilter marks. Until it
- will get removed the hook deferral is disabled by default and is
- only enabled when needed.
-
-Who: Patrick McHardy <kaber@trash.net>
-
----------------------------
-
What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
When: October 2008
Why: The stacking of class devices makes these values misleading and
Who: Patrick McHardy <kaber@trash.net>
---------------------------
+
+What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
+When: December 2006
+Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
+ functionally very much similar. They talk to ACPI in same way. Only
+ difference between them is the way they do frequency transitions.
+ One uses MSRs and the other one uses IO ports. Functionaliy of
+ speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq.
+ That means one common driver will support all Intel Enhanced Speedstep
+ capable CPUs. That means less confusion over name of
+ speedstep-centrino driver (with that driver supposed to be used on
+ non-centrino platforms). That means less duplication of code and
+ less maintenance effort and no possibility of these two drivers
+ going out of sync.
+ Current users of speedstep_centrino with ACPI hooks are requested to
+ switch over to acpi-cpufreq driver. speedstep-centrino will continue
+ to work using older non-ACPI static table based scheme even after this
+ date.
+
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+---------------------------
If you have any patches, questions or suggestions regarding this BFS
implementation please contact the author:
-Tigran A. Aivazian <tigran@veritas.com>
+Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
intr (*) Allow signals to interrupt cluster operations.
nointr Do not allow signals to interrupt cluster
operations.
+atime_quantum=60(*) OCFS2 will not update atime unless this number
+ of seconds has passed since the last update.
+ Set to zero to always update atime.
Prefix: 'f71805f'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Provided by Fintek on request
+ * Fintek F71872F/FG
+ Prefix: 'f71872f'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Provided by Fintek on request
Author: Jean Delvare <khali@linux-fr.org>
test system (custom Jetway K8M8MS motherboard, with CPU and RAM) and
for providing initial documentation.
-Thanks to Kris Chen from Fintek for answering technical questions and
-providing additional documentation.
+Thanks to Kris Chen and Aaron Huang from Fintek for answering technical
+questions and providing additional documentation.
Thanks to Chris Lin from Jetway for providing wiring schematics and
answering technical questions.
source), 3 fans and 3 temperature sensors.
This chip also has fan controlling features, using either DC or PWM, in
-three different modes (one manual, two automatic). The driver doesn't
-support these features yet.
+three different modes (one manual, two automatic).
+
+The Fintek F71872F/FG Super I/O chip is almost the same, with two
+additional internal voltages monitored (VSB and battery). It also features
+6 VID inputs. The VID inputs are not yet supported by this driver.
The driver assumes that no more than one chip is present, which seems
reasonable.
range is thus from 0 to 2.040 V. Voltage values outside of this range
need external resistors. An exception is in0, which is used to monitor
the chip's own power source (+3.3V), and is divided internally by a
-factor 2.
+factor 2. For the F71872F/FG, in9 (VSB) and in10 (battery) are also
+divided internally by a factor 2.
The two LSB of the voltage limit registers are not used (always 0), so
you can only set the limits in steps of 32 mV (before scaling).
in6 VIN6 VCC1.5V 10K - 1.00 1.50 V
in7 VIN7 VCORE 10K - 1.00 ~1.40 V (1)
in8 VIN8 VSB5V 200K 47K 1.00 0.95 V
+in10 VSB VSB3.3V int. int. 2.00 1.65 V (3)
+in9 VBAT VBATTERY int. int. 2.00 1.50 V (3)
(1) Depends on your hardware setup.
(2) Obviously not correct, swapping R1 and R2 would make more sense.
+(3) F71872F/FG only.
These values can be used as hints at best, as motherboard manufacturers
are free to use a completely different setup. As a matter of fact, the
or a thermistor. The driver reports the currently selected mode, but
doesn't allow changing it. In theory, the BIOS should have configured
everything properly.
+
+
+Fan Control
+-----------
+
+Both PWM (pulse-width modulation) and DC fan speed control methods are
+supported. The right one to use depends on external circuitry on the
+motherboard, so the driver assumes that the BIOS set the method
+properly. The driver will report the method, but won't let you change
+it.
+
+When the PWM method is used, you can select the operating frequency,
+from 187.5 kHz (default) to 31 Hz. The best frequency depends on the
+fan model. As a rule of thumb, lower frequencies seem to give better
+control, but may generate annoying high-pitch noise. Fintek recommends
+not going below 1 kHz, as the fan tachometers get confused by lower
+frequencies as well.
+
+When the DC method is used, Fintek recommends not going below 5 V, which
+corresponds to a pwm value of 106 for the driver. The driver doesn't
+enforce this limit though.
+
+Three different fan control modes are supported:
+
+* Manual mode
+ You ask for a specific PWM duty cycle or DC voltage.
+
+* Fan speed mode
+ You ask for a specific fan speed. This mode assumes that pwm1
+ corresponds to fan1, pwm2 to fan2 and pwm3 to fan3.
+
+* Temperature mode
+ You define 3 temperature/fan speed trip points, and the fan speed is
+ adjusted depending on the measured temperature, using interpolation.
+ This mode is not yet supported by the driver.
http://www.ite.com.tw/
* IT8712F
Prefix: 'it8712'
- Addresses scanned: I2C 0x2d
- from Super I/O config space (8 I/O ports)
+ Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* IT8716F
misconfigured by BIOS - PWM values would be inverted. This option tries
to fix this. Please contact your BIOS manufacturer and ask him for fix.
+
+Hardware Interfaces
+-------------------
+
+All the chips suported by this driver are LPC Super-I/O chips, accessed
+through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
+SMBus interface to the hardware monitoring functions. This driver no
+longer supports this interface though, as it is slower and less reliable
+than the ISA access, and was only available on a small number of
+motherboard models.
+
+
Description
-----------
Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
Author: Rudolf Marek
-Contact: Rudolf Marek <r.marek@sh.cvut.cz>
+Contact: Rudolf Marek <r.marek@assembler.cz>
Description
-----------
--- /dev/null
+Kernel driver pc87427
+=====================
+
+Supported chips:
+ * National Semiconductor PC87427
+ Prefix: 'pc87427'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: http://www.winbond.com.tw/E-WINBONDHTM/partner/apc_007.html
+
+Author: Jean Delvare <khali@linux-fr.org>
+
+Thanks to Amir Habibi at Candelis for setting up a test system, and to
+Michael Kress for testing several iterations of this driver.
+
+
+Description
+-----------
+
+The National Semiconductor Super I/O chip includes complete hardware
+monitoring capabilities. It can monitor up to 18 voltages, 8 fans and
+6 temperature sensors. Only the fans are supported at the moment.
+
+This chip also has fan controlling features, which are not yet supported
+by this driver either.
+
+The driver assumes that no more than one chip is present, which seems
+reasonable.
+
+
+Fan Monitoring
+--------------
+
+Fan rotation speeds are reported as 14-bit values from a gated clock
+signal. Speeds down to 83 RPM can be measured.
+
+An alarm is triggered if the rotation speed drops below a programmable
+limit. Another alarm is triggered if the speed is too low to to be measured
+(including stalled or missing fan).
****************
temp[1-*]_type Sensor type selection.
- Integers 1 to 4 or thermistor Beta value (typically 3435)
+ Integers 1 to 6 or thermistor Beta value (typically 3435)
RW
1: PII/Celeron Diode
2: 3904 transistor
3: thermal diode
4: thermistor (default/unknown Beta)
+ 5: AMD AMDSI
+ 6: Intel PECI
Not all types are supported by all chips
temp[1-*]_max Temperature max value.
Authors:
Jean Delvare <khali@linux-fr.org>
Yuan Mu (Winbond)
- Rudolf Marek <r.marek@sh.cvut.cz>
+ Rudolf Marek <r.marek@assembler.cz>
Description
-----------
and Mark Studebaker <mdsxyz123@yahoo.com>
w83792d.c:
Chunhao Huang <DZShen@Winbond.com.tw>,
- Rudolf Marek <r.marek@sh.cvut.cz>
+ Rudolf Marek <r.marek@assembler.cz>
Additional contributors:
Sven Anders <anders@anduras.de>
--- /dev/null
+Kernel driver w83793
+====================
+
+Supported chips:
+ * Winbond W83793G/W83793R
+ Prefix: 'w83793'
+ Addresses scanned: I2C 0x2c - 0x2f
+ Datasheet: Still not published
+
+Authors:
+ Yuan Mu (Winbond Electronics)
+ Rudolf Marek <r.marek@assembler.cz>
+
+
+Module parameters
+-----------------
+
+* reset int
+ (default 0)
+ This parameter is not recommended, it will lose motherboard specific
+ settings. Use 'reset=1' to reset the chip when loading this module.
+
+* force_subclients=bus,caddr,saddr1,saddr2
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b'
+ to force the subclients of chip 0x2f on bus 0 to i2c addresses
+ 0x4a and 0x4b.
+
+
+Description
+-----------
+
+This driver implements support for Winbond W83793G/W83793R chips.
+
+* Exported features
+ This driver exports 10 voltage sensors, up to 12 fan tachometer inputs,
+ 6 remote temperatures, up to 8 sets of PWM fan controls, SmartFan
+ (automatic fan speed control) on all temperature/PWM combinations, 2
+ sets of 6-pin CPU VID input.
+
+* Sensor resolutions
+ If your motherboard maker used the reference design, the resolution of
+ voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6,
+ 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution,
+ temp5-6 have a 1 degree Celsiis resolution.
+
+* Temperature sensor types
+ Temp1-4 have 3 possible types. It can be read from (and written to)
+ temp[1-4]_type.
+ - If the value of 0, the related temperature channel stops
+ monitoring.
+ - If the value is 3, it starts monitoring using a remote termal diode
+ (default).
+ - If the value is 5, it starts monitoring using the temperature sensor
+ in AMD CPU and get result by AMDSI.
+ - If the value is 6, it starts monitoring using the temperature sensor
+ in Intel CPU and get result by PECI.
+ Temp5-6 can be connected to external thermistors (value of
+ temp[5-6]_type is 4). They can also be disabled (value is 0).
+
+* Alarm mechanism
+ For voltage sensors, an alarm triggers if the measured value is below
+ the low voltage limit or over the high voltage limit.
+ For temperature sensors, an alarm triggers if the measured value goes
+ above the high temperature limit, and wears off only after the measured
+ value drops below the hysteresis value.
+ For fan sensors, an alarm triggers if the measured value is below the
+ low speed limit.
+
+* SmartFan/PWM control
+ If you want to set a pwm fan to manual mode, you just need to make sure it
+ is not controlled by any temp channel, for example, you want to set fan1
+ to manual mode, you need to check the value of temp[1-6]_fan_map, make
+ sure bit 0 is cleared in the 6 values. And then set the pwm1 value to
+ control the fan.
+
+ Each temperature channel can control all the 8 PWM outputs (by setting the
+ corresponding bit in tempX_fan_map), you can set the temperature channel
+ mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3
+ is the SmartFanII mode. Temperature channels will try to speed up or
+ slow down all controlled fans, this means one fan can receive different
+ PWM value requests from different temperature channels, but the chip
+ will always pick the safest (max) PWM value for each fan.
+
+ In Thermal Cruise mode, the chip attempts to keep the temperature at a
+ predefined value, within a tolerance margin. So if tempX_input >
+ thermal_cruiseX + toleranceX, the chip will increase the PWM value,
+ if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease
+ the PWM value. If the temperature is within the tolerance range, the PWM
+ value is left unchanged.
+
+ SmartFanII works differently, you have to define up to 7 PWM, temperature
+ trip points, defining a PWM/temperature curve which the chip will follow.
+ While not fundamentally different from the Thermal Cruise mode, the
+ implementation is quite different, giving you a finer-grained control.
+
+* Chassis
+ If the case open alarm triggers, it will stay in this state unless cleared
+ by any write to the sysfs file "chassis".
+
+* VID and VRM
+ The VRM version is detected automatically, don't modify the it unless you
+ *do* know the cpu VRM version and it's not properly detected.
+
+
+Notes
+-----
+
+ Only Fan1-5 and PWM1-3 are guaranteed to always exist, other fan inputs and
+ PWM outputs may or may not exist depending on the chip pin configuration.
Datasheets:
AMD datasheet not yet available, but almost everything can be found
- in publically available ACPI 2.0 specification, which the adapter
+ in the publicly available ACPI 2.0 specification, which the adapter
follows.
Author: Vojtech Pavlik <vojtech@suse.cz>
* Intel 82801EB/ER (ICH5) (HW PEC supported, 32 byte buffer not supported)
* Intel 6300ESB
* Intel 82801FB/FR/FW/FRW (ICH6)
- * Intel ICH7
+ * Intel 82801G (ICH7)
+ * Intel 631xESB/632xESB (ESB2)
+ * Intel 82801H (ICH8)
+ * Intel ICH9
Datasheets: Publicly available at the Intel website
Authors:
* nForce4 MCP51 10de:0264
* nForce4 MCP55 10de:0368
-Datasheet: not publically available, but seems to be similar to the
+Datasheet: not publicly available, but seems to be similar to the
AMD-8111 SMBus 2.0 adapter.
Authors:
- Hans-Frieder Vogt <hfvogt@arcor.de>,
+ Hans-Frieder Vogt <hfvogt@gmx.net>,
Thomas Leibold <thomas@plx.com>,
Patrick Dreker <patrick@dreker.de>
-----
The SMBus adapter in the nForce2 chipset seems to be very similar to the
-SMBus 2.0 adapter in the AMD-8111 southbridge. However, I could only get
+SMBus 2.0 adapter in the AMD-8111 south bridge. However, I could only get
the driver to work with direct I/O access, which is different to the EC
interface of the AMD-8111. Tested on Asus A7N8X. The ACPI DSDT table of the
Asus A7N8X lists two SMBuses, both of which are supported by this driver.
Most ThinkPads include six or more separate temperature sensors but
only expose the CPU temperature through the standard ACPI methods.
-This feature shows readings from up to eight different sensors. Some
-readings may not be valid, e.g. may show large negative values. For
-example, on the X40, a typical output may be:
+This feature shows readings from up to eight different sensors on older
+ThinkPads, and it has experimental support for up to sixteen different
+sensors on newer ThinkPads. Readings from sensors that are not available
+return -128.
+No commands can be written to this file.
+
+EXPERIMENTAL: The 16-sensors feature is marked EXPERIMENTAL because the
+implementation directly accesses hardware registers and may not work as
+expected. USE WITH CAUTION! To use this feature, you need to supply the
+experimental=1 parameter when loading the module. When EXPERIMENTAL
+mode is enabled, reading the first 8 sensors on newer ThinkPads will
+also use an new experimental thermal sensor access mode.
+
+For example, on the X40, a typical output may be:
temperatures: 42 42 45 41 36 -128 33 -128
-Thomas Gruber took his R51 apart and traced all six active sensors in
-his laptop (the location of sensors may vary on other models):
+EXPERIMENTAL: On the T43/p, a typical output may be:
+temperatures: 48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
+
+The mapping of thermal sensors to physical locations varies depending on
+system-board model (and thus, on ThinkPad model).
+
+http://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
+tries to track down these locations for various models.
+
+Most (newer?) models seem to follow this pattern:
1: CPU
-2: Mini PCI Module
-3: HDD
+2: (depends on model)
+3: (depends on model)
4: GPU
-5: Battery
-6: N/A
-7: Battery
-8: N/A
+5: Main battery: main sensor
+6: Bay battery: main sensor
+7: Main battery: secondary sensor
+8: Bay battery: secondary sensor
+9-15: (depends on model)
+
+For the R51 (source: Thomas Gruber):
+2: Mini-PCI
+3: Internal HDD
+
+For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
+http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
+2: System board, left side (near PCMCIA slot), reported as HDAPS temp
+3: PCMCIA slot
+9: MCH (northbridge) to DRAM Bus
+10: ICH (southbridge), under Mini-PCI card, under touchpad
+11: Power regulator, underside of system board, below F2 key
+
+The A31 has a very atypical layout for the thermal sensors
+(source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
+1: CPU
+2: Main Battery: main sensor
+3: Power Converter
+4: Bay Battery: main sensor
+5: MCH (northbridge)
+6: PCMCIA/ambient
+7: Main Battery: secondary sensor
+8: Bay Battery: secondary sensor
-No commands can be written to this file.
EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
------------------------------------------------------------------------
WITH CAUTION! To use this feature, you need to supply the
experimental=1 parameter when loading the module.
-This feature attempts to show the current fan speed. The speed is read
-directly from the hardware registers of the embedded controller. This
-is known to work on later R, T and X series ThinkPads but may show a
-bogus value on other models.
+This feature attempts to show the current fan speed, control mode and
+other fan data that might be available. The speed is read directly
+from the hardware registers of the embedded controller. This is known
+to work on later R, T and X series ThinkPads but may show a bogus
+value on other models.
+
+Most ThinkPad fans work in "levels". Level 0 stops the fan. The higher
+the level, the higher the fan speed, although adjacent levels often map
+to the same fan speed. 7 is the highest level, where the fan reaches
+the maximum recommended speed. Level "auto" means the EC changes the
+fan level according to some internal algorithm, usually based on
+readings from the thermal sensors. Level "disengaged" means the EC
+disables the speed-locked closed-loop fan control, and drives the fan as
+fast as it can go, which might exceed hardware limits, so use this level
+with caution.
+
+The fan usually ramps up or down slowly from one speed to another,
+and it is normal for the EC to take several seconds to react to fan
+commands.
The fan may be enabled or disabled with the following commands:
echo enable >/proc/acpi/ibm/fan
echo disable >/proc/acpi/ibm/fan
+Placing a fan on level 0 is the same as disabling it. Enabling a fan
+will try to place it in a safe level if it is too slow or disabled.
+
WARNING WARNING WARNING: do not leave the fan disabled unless you are
-monitoring the temperature sensor readings and you are ready to enable
-it if necessary to avoid overheating.
+monitoring all of the temperature sensor readings and you are ready to
+enable it if necessary to avoid overheating.
-The fan only runs if it's enabled *and* the various temperature
-sensors which control it read high enough. On the X40, this seems to
-depend on the CPU and HDD temperatures. Specifically, the fan is
-turned on when either the CPU temperature climbs to 56 degrees or the
-HDD temperature climbs to 46 degrees. The fan is turned off when the
-CPU temperature drops to 49 degrees and the HDD temperature drops to
-41 degrees. These thresholds cannot currently be controlled.
+An enabled fan in level "auto" may stop spinning if the EC decides the
+ThinkPad is cool enough and doesn't need the extra airflow. This is
+normal, and the EC will spin the fan up if the varios thermal readings
+rise too much.
+
+On the X40, this seems to depend on the CPU and HDD temperatures.
+Specifically, the fan is turned on when either the CPU temperature
+climbs to 56 degrees or the HDD temperature climbs to 46 degrees. The
+fan is turned off when the CPU temperature drops to 49 degrees and the
+HDD temperature drops to 41 degrees. These thresholds cannot
+currently be controlled.
+
+The fan level can be controlled with the command:
+
+ echo 'level <level>' > /proc/acpi/ibm/thermal
+
+Where <level> is an integer from 0 to 7, or one of the words "auto"
+or "disengaged" (without the quotes). Not all ThinkPads support the
+"auto" and "disengaged" levels.
On the X31 and X40 (and ONLY on those models), the fan speed can be
controlled to a certain degree. Once the fan is running, it can be
any effect or the fan speed eventually settles somewhere in that
range. The fan cannot be stopped or started with this command.
-On the 570, temperature readings are not available through this
-feature and the fan control works a little differently. The fan speed
-is reported in levels from 0 (off) to 7 (max) and can be controlled
-with the following command:
-
- echo 'level <level>' > /proc/acpi/ibm/thermal
+The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
+certain conditions are met. It will override any fan programming done
+through ibm-acpi.
EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan
---------------------------------------
modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable
+The ibm-acpi kernel driver can be programmed to revert the fan level
+to a safe setting if userspace does not issue one of the fan commands:
+"enable", "disable", "level" or "watchdog" within a configurable
+ammount of time. To do this, use the "watchdog" command.
+
+ echo 'watchdog <interval>' > /proc/acpi/ibm/fan
+
+Interval is the ammount of time in seconds to wait for one of the
+above mentioned fan commands before reseting the fan level to a safe
+one. If set to zero, the watchdog is disabled (default). When the
+watchdog timer runs out, it does the exact equivalent of the "enable"
+fan command.
+
+Note that the watchdog timer stops after it enables the fan. It will
+be rearmed again automatically (using the same interval) when one of
+the above mentioned fan commands is received. The fan watchdog is,
+therefore, not suitable to protect against fan mode changes made
+through means other than the "enable", "disable", and "level" fan
+commands.
+
Example Configuration
---------------------
<mailto:aherrman@de.ibm.com>
0xF3 00-3F video/sisfb.h sisfb (in development)
<mailto:thomas@winischhofer.net>
+0xF4 00-1F video/mbxfb.h mbxfb
+ <mailto:raph@8d.com>
--- /dev/null
+To decode a hex IOCTL code:
+
+Most architecures use this generic format, but check
+include/ARCH/ioctl.h for specifics, e.g. powerpc
+uses 3 bits to encode read/write and 13 bits for size.
+
+ bits meaning
+ 31-30 00 - no parameters: uses _IO macro
+ 10 - read: _IOR
+ 01 - write: _IOW
+ 11 - read/write: _IOWR
+
+ 29-16 size of arguments
+
+ 15-8 ascii character supposedly
+ unique to each driver
+
+ 7-0 function #
+
+
+ So for example 0x82187201 is a read with arg length of 0x218,
+character 'r' function 1. Grepping the source reveals this is:
+
+#define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct dirent [2])
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
help
Usually, modules have to be recompiled whenever you switch to a new
kernel. ...
it can be specified explicitly:
menu "Network device support"
- depends NET
+ depends on NET
config NETDEVICES
...
config MODVERSIONS
bool "Set version information on all module symbols"
- depends MODULES
+ depends on MODULES
comment "module support disabled"
- depends !MODULES
+ depends on !MODULES
MODVERSIONS directly depends on MODULES, this means it's only visible if
MODULES is different from 'n'. The comment on the other hand is always
eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog.
Format: <io>[,<irq>]
+ failslab=
+ fail_page_alloc=
+ fail_make_request=[KNL]
+ General fault injection mechanism.
+ Format: <interval>,<probability>,<space>,<times>
+ See also /Documentation/fault-injection/.
+
fd_mcs= [HW,SCSI]
See header of drivers/scsi/fd_mcs.c.
sym53c416= [HW,SCSI]
See header of drivers/scsi/sym53c416.c.
+ sysrq_always_enabled
+ [KNL]
+ Ignore sysrq setting - this boot parameter will
+ neutralize any effect of /proc/sys/kernel/sysrq.
+ Useful for debugging.
+
t128= [HW,SCSI]
See header of drivers/scsi/t128.c.
It has a base protocol and pluggable congestion control IDs (CCIDs).
-It is at experimental RFC status and the homepage for DCCP as a protocol is at:
+It is at proposed standard RFC status and the homepage for DCCP as a protocol
+is at:
http://www.read.cs.ucla.edu/dccp/
Missing features
Socket options
==============
-DCCP_SOCKOPT_PACKET_SIZE is used for CCID3 to set default packet size for
-calculations.
-
DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
the socket will fall back to 0 (which means that no meaningful service code
- 0.0.0002/
- 0.1.0000/0.1.1234/
...
+ - defunct/
In this example, device 0815 is accessed via subchannel 0 in subchannel set 0,
device 4711 via subchannel 1 in subchannel set 0, and subchannel 2 is a non-I/O
subchannel. Device 1234 is accessed via subchannel 0 in subchannel set 1.
+The subchannel named 'defunct' does not represent any real subchannel on the
+system; it is a pseudo subchannel where disconnnected ccw devices are moved to
+if they are displaced by another ccw device becoming operational on their
+former subchannel. The ccw devices will be moved again to a proper subchannel
+if they become operational again on that subchannel.
+
You should address a ccw device via its bus id (e.g. 0.0.4711); the device can
be found under bus/ccw/devices/.
u8 tx_threshold;
u8 rx_threshold;
u8 dma_burst_size;
- u32 timeout_microsecs;
+ u32 timeout;
u8 enable_loopback;
void (*cs_control)(u32 command);
};
to determine the correct value. An SSP configured for byte-wide transfers would
use a value of 8.
-The "pxa2xx_spi_chip.timeout_microsecs" fields is used to efficiently handle
+The "pxa2xx_spi_chip.timeout" fields is used to efficiently handle
trailing bytes in the SSP receiver fifo. The correct value for this field is
dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific
slave device. Please note that the PXA2xx SSP 1 does not support trailing byte
}
static struct pxa2xx_spi_chip cs8415a_chip_info = {
- .tx_threshold = 12, /* SSP hardward FIFO threshold */
- .rx_threshold = 4, /* SSP hardward FIFO threshold */
+ .tx_threshold = 8, /* SSP hardward FIFO threshold */
+ .rx_threshold = 8, /* SSP hardward FIFO threshold */
.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
- .timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+ .timeout = 235, /* See Intel documentation */
.cs_control = cs8415a_cs_control, /* Use external chip select */
};
static struct pxa2xx_spi_chip cs8405a_chip_info = {
- .tx_threshold = 12, /* SSP hardward FIFO threshold */
- .rx_threshold = 4, /* SSP hardward FIFO threshold */
+ .tx_threshold = 8, /* SSP hardward FIFO threshold */
+ .rx_threshold = 8, /* SSP hardward FIFO threshold */
.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
- .timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+ .timeout = 235, /* See Intel documentation */
.cs_control = cs8405a_cs_control, /* Use external chip select */
};
42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025,1822:0019]
43 -> KWorld/VStream XPert DVB-T with cx22702 [17de:08a1,12ab:2300]
44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50,18ac:db54]
- 45 -> KWorld HardwareMpegTV XPert [17de:0840]
+ 45 -> KWorld HardwareMpegTV XPert [17de:0840,1421:0305]
46 -> DViCO FusionHDTV DVB-T Hybrid [18ac:db40,18ac:db44]
47 -> pcHDTV HD5500 HDTV [7063:5500]
48 -> Kworld MCE 200 Deluxe [17de:0841]
75 -> AVerMedia AVerTVHD MCE A180 [1461:1044]
76 -> SKNet MonsterTV Mobile [1131:4ee9]
77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e]
- 78 -> ASUSTeK P7131 Dual [1043:4862]
+ 78 -> ASUSTeK P7131 Dual [1043:4862,1043:4876]
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
81 -> Philips Tiger reference design [1131:2018]
98 -> Proteus Pro 2309 [0919:2003]
99 -> AVerMedia TV Hybrid A16AR [1461:2c00]
100 -> Asus Europa2 OEM [1043:4860]
+101 -> Pinnacle PCTV 310i [11bd:002f]
+102 -> Avermedia AVerTV Studio 507 [1461:9715]
+103 -> Compro Videomate DVB-T200A
+104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid [0070:6701]
+105 -> Terratec Cinergy HT PCMCIA [153b:1172]
--- /dev/null
+"cafe_ccic" is a driver for the Marvell 88ALP01 "cafe" CMOS camera
+controller. This is the controller found in first-generation OLPC systems,
+and this driver was written with support from the OLPC project.
+
+Current status: the core driver works. It can generate data in YUV422,
+RGB565, and RGB444 formats. (Anybody looking at the code will see RGB32 as
+well, but that is a debugging aid which will be removed shortly). VGA and
+QVGA modes work; CIF is there but the colors remain funky. Only the OV7670
+sensor is known to work with this controller at this time.
+
+To try it out: either of these commands will work:
+
+ mplayer tv:// -tv driver=v4l2:width=640:height=480 -nosound
+ mplayer tv:// -tv driver=v4l2:width=640:height=480:outfmt=bgr16 -nosound
+
+The "xawtv" utility also works; gqcam does not, for unknown reasons.
+
+There are a few load-time options, most of which can be changed after
+loading via sysfs as well:
+
+ - alloc_bufs_at_load: Normally, the driver will not allocate any DMA
+ buffers until the time comes to transfer data. If this option is set,
+ then worst-case-sized buffers will be allocated at module load time.
+ This option nails down the memory for the life of the module, but
+ perhaps decreases the chances of an allocation failure later on.
+
+ - dma_buf_size: The size of DMA buffers to allocate. Note that this
+ option is only consulted for load-time allocation; when buffers are
+ allocated at run time, they will be sized appropriately for the current
+ camera settings.
+
+ - n_dma_bufs: The controller can cycle through either two or three DMA
+ buffers. Normally, the driver tries to use three buffers; on faster
+ systems, however, it will work well with only two.
+
+ - min_buffers: The minimum number of streaming I/O buffers that the driver
+ will consent to work with. Default is one, but, on slower systems,
+ better behavior with mplayer can be achieved by setting to a higher
+ value (like six).
+
+ - max_buffers: The maximum number of streaming I/O buffers; default is
+ ten. That number was carefully picked out of a hat and should not be
+ assumed to actually mean much of anything.
+
+ - flip: If this boolean parameter is set, the sensor will be instructed to
+ invert the video image. Whether it makes sense is determined by how
+ your particular camera is mounted.
+
+Work is ongoing with this driver, stay tuned.
+
+jon
+
+Jonathan Corbet
+corbet@lwn.net
+++ /dev/null
-Driver for Trust Computer Products Framegrabber, version 0.6.1
------- --- ----- -------- -------- ------------ ------- - - -
-
-- ZORAN ------------------------------------------------------
- Author: Pauline Middelink <middelin@polyware.nl>
- Date: 18 September 1999
-Version: 0.6.1
-
-- Description ------------------------------------------------
-
-Video4Linux compatible driver for an unknown brand framegrabber
-(Sold in the Netherlands by TRUST Computer Products) and various
-other zoran zr36120 based framegrabbers.
-
-The card contains a ZR36120 Multimedia PCI Interface and a Philips
-SAA7110 Onechip Frontend videodecoder. There is also an DSP of
-which I have forgotten the number, since i will never get that thing
-to work without specs from the vendor itself.
-
-The SAA711x are capable of processing 6 different video inputs,
-CVBS1..6 and Y1+C1, Y2+C2, Y3+C3. All in 50/60Hz, NTSC, PAL or
-SECAM and delivering a YUV datastream. On my card the input
-'CVBS-0' corresponds to channel CVBS2 and 'S-Video' to Y2+C2.
-
-I have some reports of other cards working with the mentioned
-chip sets. For a list of other working cards please have a look
-at the cards named in the tvcards struct in the beginning of
-zr36120.c
-
-After some testing, I discovered that the carddesigner messed up
-on the I2C interface. The Zoran chip includes 2 lines SDA and SCL
-which (s)he connected reversely. So we have to clock on the SDA
-and r/w data on the SCL pin. Life is fun... Each cardtype now has
-a bit which signifies if you have a card with the same deficiency.
-
-Oh, for the completeness of this story I must mention that my
-card delivers the VSYNC pulse of the SAA chip to GIRQ1, not
-GIRQ0 as some other cards have. This is also incorporated in
-the driver be clearing/setting the 'useirq1' bit in the tvcard
-description.
-
-Another problems of continuous capturing data with a Zoran chip
-is something nasty inside the chip. It effectively halves the
-fps we ought to get... Here is the scenario: capturing frames
-to memory is done in the so-called snapshot mode. In this mode
-the Zoran stops after capturing a frame worth of data and wait
-till the application set GRAB bit to indicate readiness for the
-next frame. After detecting a set bit, the chip neatly waits
-till the start of a frame, captures it and it goes back to off.
-Smart ppl will notice the problem here. Its the waiting on the
-_next_ frame each time we set the GRAB bit... Oh well, 12,5 fps
-is still plenty fast for me.
--- update 28/7/1999 --
-Don't believe a word I just said... Proof is the output
-of `streamer -t 300 -r 25 -f avi15 -o /dev/null`
- ++--+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
- +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+-
- syncer: done
- writer: done
-(note the /dev/null is prudent here, my system is not able to
- grab /and/ write 25 fps to a file... gifts welcome :) )
-The technical reasoning follows: The zoran completed the last
-frame, the VSYNC goes low, and GRAB is cleared. The interrupt
-routine starts to work since its VSYNC driven, and again
-activates the GRAB bit. A few ms later the VSYNC (re-)rises and
-the zoran starts to work on a new and freshly broadcasted frame....
-
-For pointers I used the specs of both chips. Below are the URLs:
- http://www.zoran.com/ftp/download/devices/pci/ZR36120/36120data.pdf
- http://www-us.semiconductor.philips.com/acrobat/datasheets/SAA_7110_A_1.pdf
-Some alternatives for the Philips SAA 7110 datasheet are:
- http://www.datasheetcatalog.com/datasheets_pdf/S/A/A/7/SAA7110.shtml
- http://www.datasheetarchive.com/search.php?search=SAA7110&sType=part
-
-The documentation has very little on absolute numbers or timings
-needed for the various modes/resolutions, but there are other
-programs you can borrow those from.
-
------- Install --------------------------------------------
-Read the file called TODO. Note its long list of limitations.
-
-Build a kernel with VIDEO4LINUX enabled. Activate the
-BT848 driver; we need this because we have need for the
-other modules (i2c and videodev) it enables.
-
-To install this software, extract it into a suitable directory.
-Examine the makefile and change anything you don't like. Type "make".
-
-After making the modules check if you have the much needed
-/dev/video devices. If not, execute the following 4 lines:
- mknod /dev/video c 81 0
- mknod /dev/video1 c 81 1
- mknod /dev/video2 c 81 2
- mknod /dev/video3 c 81 3
- mknod /dev/video4 c 81 4
-
-After making/checking the devices do:
- modprobe i2c
- modprobe videodev
- modprobe saa7110 (optional)
- modprobe saa7111 (optional)
- modprobe tuner (optional)
- insmod zoran cardtype=<n>
-
-<n> is the cardtype of the card you have. The cardnumber can
-be found in the source of zr36120. Look for tvcards. If your
-card is not there, please try if any other card gives some
-response, and mail me if you got a working tvcard addition.
-
-PS. <TVCard editors behold!)
- Don't forget to set video_input to the number of inputs
- you defined in the video_mux part of the tvcard definition.
- It's a common error to add a channel but not incrementing
- video_input and getting angry with me/v4l/linux/linus :(
-
-You are now ready to test the framegrabber with your favorite
-video4linux compatible tool
-
------- Application ----------------------------------------
-
-This device works with all Video4Linux compatible applications,
-given the limitations in the TODO file.
-
------- API ------------------------------------------------
-
-This uses the V4L interface as of kernel release 2.1.116, and in
-fact has not been tested on any lower version. There are a couple
-of minor differences due to the fact that the amount of data returned
-with each frame varies, and no doubt there are discrepancies due to my
-misunderstanding of the API. I intend to convert this driver to the
-new V4L2 API when it has stabilized more.
-
------- Current state --------------------------------------
-
-The driver is capable of overlaying a video image in screen, and
-even capable of grabbing frames. It uses the BIGPHYSAREA patch
-to allocate lots of large memory blocks when tis patch is
-found in the kernel, but it doesn't need it.
-The consequence is that, when loading the driver as a module,
-the module may tell you it's out of memory, but 'free' says
-otherwise. The reason is simple; the modules wants its memory
-contiguous, not fragmented, and after a long uptime there
-probably isn't a fragment of memory large enough...
-
-The driver uses a double buffering scheme, which should really
-be an n-way buffer, depending on the size of allocated framebuffer
-and the requested grab-size/format.
-This current version also fixes a dead-lock situation during irq
-time, which really, really froze my system... :)
-
-Good luck.
- Pauline
ALI1563 I2C DRIVER
P: Rudolf Marek
-M: r.marek@sh.cvut.cz
+M: r.marek@assembler.cz
L: i2c@lm-sensors.org
S: Maintained
W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
S: Supported
+AMS (Apple Motion Sensor) DRIVER
+P: Stelian Pop
+M: stelian@popies.net
+P: Michael Hanselmann
+M: linux-kernel@hansmi.ch
+S: Supported
+
AMSO1100 RNIC DRIVER
P: Tom Tucker
M: tom@opengridcomputing.com
CIRRUS LOGIC GENERIC FBDEV DRIVER
P: Jeff Garzik
M: jgarzik@pobox.com
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Odd Fixes
CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
M: davej@codemonkey.org.uk
L: cpufreq@lists.linux.org.uk
W: http://www.codemonkey.org.uk/projects/cpufreq/
-T: git kernel.org/pub/scm/linux/kernel/davej/cpufreq.git
+T: git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
S: Maintained
CPUID/MSR DRIVER
CYBLAFB FRAMEBUFFER DRIVER
P: Knut Petersen
M: Knut_Petersen@t-online.de
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
CYCLADES 2X SYNC CARD DRIVER
FRAMEBUFFER LAYER
P: Antonino Daplas
M: adaplas@pol.net
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
W: http://linux-fbdev.sourceforge.net/
S: Maintained
T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
S: Maintained
+IBM ACPI EXTRAS DRIVER
+P: Henrique de Moraes Holschuh
+M: ibm-acpi@hmh.eng.br
+L: ibm-acpi-devel@lists.sourceforge.net
+W: http://ibm-acpi.sourceforge.net
+W: http://thinkwiki.org/wiki/Ibm-acpi
+T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
+S: Maintained
+
SN-IA64 (Itanium) SUB-PLATFORM
P: Jes Sorensen
M: jes@sgi.com
IMS TWINTURBO FRAMEBUFFER DRIVER
P: Paul Mundt
M: lethal@chaoticdreams.org
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
INFINIBAND SUBSYSTEM
S: Maintained
INOTIFY
-P: John McCutchan and Robert Love
-M: ttb@tentacle.dhs.org and rml@novell.com
+P: John McCutchan
+M: ttb@tentacle.dhs.org
+P: Robert Love
+M: rml@novell.com
L: linux-kernel@vger.kernel.org
S: Maintained
INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
P: Sylvain Meyer
M: sylvain.meyer@worldonline.fr
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
INTEL 810/815 FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@pol.net
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
INTEL APIC/IOAPIC, LOWLEVEL X86 SMP SUPPORT
W: http://www.cse.unsw.edu.au/~neilb/patches/linux-devel/
S: Maintained
+KERNEL VIRTUAL MACHINE (KVM)
+P: Avi Kivity
+M: avi@qumranet.com
+L: kvm-devel@lists.sourceforge.net
+W: kvm.sourceforge.net
+S: Supported
+
KEXEC
P: Eric Biederman
M: ebiederm@xmission.com
MATROX FRAMEBUFFER DRIVER
P: Petr Vandrovec
M: vandrove@vc.cvut.cz
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
MEGARAID SCSI DRIVERS
L: linux-kernel@vger.kernel.org
S: Maintained
+MOXA SMARTIO/INDUSTIO SERIAL CARD (MXSER 2.0)
+P: Jiri Slaby
+M: jirislaby@gmail.com
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
MSI LAPTOP SUPPORT
P: Lennart Poettering
M: mzxreary@0pointer.de
M: andrewtv@usa.net
S: Maintained
+MULTITECH MULTIPORT CARD (ISICOM)
+P: Jiri Slaby
+M: jirislaby@gmail.com
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
NATSEMI ETHERNET DRIVER (DP8381x)
P: Tim Hockin
M: thockin@hockin.org
NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@pol.net
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
OPENCORES I2C BUS DRIVER
RADEON FRAMEBUFFER DISPLAY DRIVER
P: Benjamin Herrenschmidt
M: benh@kernel.crashing.org
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
RAGE128 FRAMEBUFFER DISPLAY DRIVER
P: Paul Mackerras
M: paulus@samba.org
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
REAL TIME CLOCK (RTC) SUBSYSTEM
P: Alessandro Zummo
M: a.zummo@towertech.it
-L: linux-kernel@vger.kernel.org
+L: rtc-linux@googlegroups.com
S: Maintained
REISERFS FILE SYSTEM
S3 SAVAGE FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@pol.net
-L: linux-fbdev-devel@lists.sourceforge.net
+L: linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
S390
L: lm-sensors@lm-sensors.org
S: Maintained
+W83793 HARDWARE MONITORING DRIVER
+P: Rudolf Marek
+M: r.marek@assembler.cz
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
W83L51xD SD/MMC CARD INTERFACE DRIVER
P: Pierre Ossman
M: drzeus-wbsd@drzeus.cx
VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 19
-EXTRAVERSION =
+SUBLEVEL = 20
+EXTRAVERSION =-rc1
NAME=Avast! A bilge rat!
# *DOCUMENTATION*
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
-# Do not print "Entering directory ..."
-MAKEFLAGS += --no-print-directory
+# Do not:
+# o use make's built-in rules and variables
+# (this increases performance and avoid hard-to-debug behavour);
+# o print "Entering directory ...";
+MAKEFLAGS += -rR --no-print-directory
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
-# We need some generic definitions
-include $(srctree)/scripts/Kbuild.include
-
-# Do not use make's built-in rules and variables
-# This increases performance and avoid hard-to-debug behavour
-MAKEFLAGS += -rR
+# We need some generic definitions.
+include $(srctree)/scripts/Kbuild.include
# Make variables (CC, etc...)
help:
@echo 'Cleaning targets:'
- @echo ' clean - remove most generated files but keep the config and'
+ @echo ' clean - Remove most generated files but keep the config and'
@echo ' enough build support to build external modules'
- @echo ' mrproper - remove all generated files + config + various backup files'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
@echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
@echo 'Configuration targets:'
PHONY += checkstack kernelrelease kernelversion
-# Use $(SUBARCH) here instead of $(ARCH) so that this works for UML.
-# In the UML case, $(SUBARCH) is the name of the underlying
-# architecture, while for all other arches, it is the same as $(ARCH).
+# UML needs a little special treatment here. It wants to use the host
+# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
+# else wants $(ARCH), including people doing cross-builds, which means
+# that $(SUBARCH) doesn't work here.
+ifeq ($(ARCH), um)
+CHECKSTACK_ARCH := $(SUBARCH)
+else
+CHECKSTACK_ARCH := $(ARCH)
+endif
checkstack:
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
- $(PERL) $(src)/scripts/checkstack.pl $(SUBARCH)
+ $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
kernelrelease:
$(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \
PHONY += FORCE
FORCE:
+# Cancel implicit rules on top Makefile, `-rR' will apply to sub-makes.
+Makefile: ;
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_FIND_NEXT_BIT
bool
default y
retval = -EBADF;
file = fget(fd);
if (file) {
- retval = do_osf_statfs(file->f_dentry, buffer, bufsiz);
+ retval = do_osf_statfs(file->f_path.dentry, buffer, bufsiz);
fput(file);
}
return retval;
long timeout;
int ret = -EINVAL;
struct fdtable *fdt;
- int max_fdset;
+ int max_fds;
timeout = MAX_SCHEDULE_TIMEOUT;
if (tvp) {
rcu_read_lock();
fdt = files_fdtable(current->files);
- max_fdset = fdt->max_fdset;
+ max_fds = fdt->max_fds;
rcu_read_unlock();
- if (n < 0 || n > max_fdset)
+ if (n < 0 || n > max_fds)
goto out_nofds;
/*
config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_HWEIGHT
bool
default y
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
menu "CPU Frequency scaling"
If in doubt, say Y.
+config CPU_FREQ_IMX
+ tristate "CPUfreq driver for i.MX CPUs"
+ depends on ARCH_IMX && CPU_FREQ
+ default n
+ help
+ This enables the CPUfreq driver for i.MX CPUs.
+
+ If in doubt, say N.
+
endmenu
endif
source "sound/Kconfig"
+source "drivers/hid/Kconfig"
+
source "drivers/usb/Kconfig"
source "drivers/mmc/Kconfig"
{
struct apm_user *as;
- as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL);
+ as = kzalloc(sizeof(*as), GFP_KERNEL);
if (as) {
/*
* XXX - this is a tiny bit broken, when we consider BSD
CALL(sys_mbind)
/* 320 */ CALL(sys_get_mempolicy)
CALL(sys_set_mempolicy)
+ CALL(sys_openat)
+ CALL(sys_mkdirat)
+ CALL(sys_mknodat)
+/* 325 */ CALL(sys_fchownat)
+ CALL(sys_futimesat)
+ CALL(sys_fstatat64)
+ CALL(sys_unlinkat)
+ CALL(sys_renameat)
+/* 330 */ CALL(sys_linkat)
+ CALL(sys_symlinkat)
+ CALL(sys_readlinkat)
+ CALL(sys_fchmodat)
+ CALL(sys_faccessat)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
}
if (c_id(&excd) == 0x80) { /* loader */
if (!ec->loader) {
- ec->loader = (loader_t)kmalloc(c_len(&excd),
+ ec->loader = kmalloc(c_len(&excd),
GFP_KERNEL);
if (ec->loader)
ecard_readbytes(ec->loader, ec,
#include <asm/thread_info.h>
#include <asm/system.h>
-#define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET)
+#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
+#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
/*
* swapper_pg_dir is the virtual address of the initial page table.
- * We place the page tables 16K below KERNEL_RAM_ADDR. Therefore, we must
- * make sure that KERNEL_RAM_ADDR is correctly set. Currently, we expect
+ * We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
+ * make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect
* the least significant 16 bits to be 0x8000, but we could probably
- * relax this restriction to KERNEL_RAM_ADDR >= PAGE_OFFSET + 0x4000.
+ * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
*/
-#if (KERNEL_RAM_ADDR & 0xffff) != 0x8000
-#error KERNEL_RAM_ADDR must start at 0xXXXX8000
+#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
+#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
.globl swapper_pg_dir
- .equ swapper_pg_dir, KERNEL_RAM_ADDR - 0x4000
+ .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
.macro pgtbl, rd
- ldr \rd, =(__virt_to_phys(KERNEL_RAM_ADDR - 0x4000))
+ ldr \rd, =(KERNEL_RAM_PADDR - 0x4000)
.endm
#ifdef CONFIG_XIP_KERNEL
#define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
#else
-#define TEXTADDR KERNEL_RAM_ADDR
+#define TEXTADDR KERNEL_RAM_VADDR
#endif
/*
#ifndef CONFIG_ARM_THUMB
elf_hwcap &= ~HWCAP_THUMB;
#endif
-#ifndef CONFIG_VFP
- elf_hwcap &= ~HWCAP_VFP;
-#endif
cpu_proc_init();
}
#include <asm/arch/gpio.h>
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9260_matrix.h>
#include "generic.h"
* MACB Ethernet device
*/
static struct __initdata eth_platform_data ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
obj-y += irq.o time.o dma.o generic.o
+obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
+
# Specific board support
obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
--- /dev/null
+/*
+ * cpu.c: clock scaling for the iMX
+ *
+ * Copyright (C) 2000 2001, The Delft University of Technology
+ * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
+ * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
+ *
+ * Based on SA1100 version written by:
+ * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
+ * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/*#define DEBUG*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <asm/system.h>
+
+#include <asm/hardware.h>
+
+#include "generic.h"
+
+#ifndef __val2mfld
+#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
+#endif
+#ifndef __mfld2val
+#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
+#endif
+
+#define CR_920T_CLOCK_MODE 0xC0000000
+#define CR_920T_FASTBUS_MODE 0x00000000
+#define CR_920T_ASYNC_MODE 0xC0000000
+
+static u32 mpctl0_at_boot;
+
+static void imx_set_async_mode(void)
+{
+ adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
+}
+
+static void imx_set_fastbus_mode(void)
+{
+ adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
+}
+
+static void imx_set_mpctl0(u32 mpctl0)
+{
+ unsigned long flags;
+
+ if (mpctl0 == 0) {
+ local_irq_save(flags);
+ CSCR &= ~CSCR_MPEN;
+ local_irq_restore(flags);
+ return;
+ }
+
+ local_irq_save(flags);
+ MPCTL0 = mpctl0;
+ CSCR |= CSCR_MPEN;
+ local_irq_restore(flags);
+}
+
+/**
+ * imx_compute_mpctl - compute new PLL parameters
+ * @new_mpctl: pointer to location assigned by new PLL control register value
+ * @cur_mpctl: current PLL control register parameters
+ * @freq: required frequency in Hz
+ * @relation: is one of %CPUFREQ_RELATION_L (supremum)
+ * and %CPUFREQ_RELATION_H (infimum)
+ */
+long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, unsigned long freq, int relation)
+{
+ u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
+ u32 mfi;
+ u32 mfn;
+ u32 mfd;
+ u32 pd;
+ unsigned long long ll;
+ long l;
+ long quot;
+
+ /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
+ /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
+
+ if (cur_mpctl) {
+ mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
+ pd = ((cur_mpctl >> 26) & 0xf) + 1;
+ } else {
+ pd=2; mfd=313;
+ }
+
+ /* pd=2; mfd=313; mfi=8; mfn=183; */
+ /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
+
+ quot = (f_ref + (1 << 9)) >> 10;
+ l = (freq * pd + quot) / (2 * quot);
+ mfi = l >> 10;
+ mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
+
+ mfd -= 1;
+ pd -= 1;
+
+ *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
+ | ((pd & 0xf) << 26);
+
+ ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
+ quot = (pd+1) * (1<<16);
+ ll += quot / 2;
+ do_div(ll, quot);
+ freq = ll;
+
+ pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
+ pd, mfd, mfi, mfn, freq);
+
+ return freq;
+}
+
+
+static int imx_verify_speed(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+
+ return 0;
+}
+
+static unsigned int imx_get_speed(unsigned int cpu)
+{
+ unsigned int freq;
+ unsigned int cr;
+ unsigned int cscr;
+ unsigned int bclk_div;
+
+ if (cpu)
+ return 0;
+
+ cscr = CSCR;
+ bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
+ cr = get_cr();
+
+ if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
+ freq = imx_get_system_clk();
+ freq = (freq + bclk_div/2) / bclk_div;
+ } else {
+ freq = imx_get_mcu_clk();
+ if (cscr & CSCR_MPU_PRESC)
+ freq /= 2;
+ }
+
+ freq = (freq + 500) / 1000;
+
+ return freq;
+}
+
+static int imx_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ u32 mpctl0 = 0;
+ u32 cscr;
+ unsigned long flags;
+ long freq;
+ long sysclk;
+ unsigned int bclk_div = 1;
+
+ freq = target_freq * 1000;
+
+ pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
+ freq, mpctl0_at_boot);
+
+ sysclk = imx_get_system_clk();
+
+ if (freq > sysclk + 1000000) {
+ freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, freq, relation);
+ if (freq < 0) {
+ printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
+ return -EINVAL;
+ }
+ } else {
+ if(freq + 1000 < sysclk) {
+ if (relation == CPUFREQ_RELATION_L)
+ bclk_div = (sysclk - 1000) / freq;
+ else
+ bclk_div = (sysclk + freq + 1000) / freq;
+
+ if(bclk_div > 16)
+ bclk_div = 16;
+ }
+ freq = (sysclk + bclk_div / 2) / bclk_div;
+ }
+
+ freqs.old = imx_get_speed(0);
+ freqs.new = (freq + 500) / 1000;
+ freqs.cpu = 0;
+ freqs.flags = 0;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ local_irq_save(flags);
+
+ imx_set_fastbus_mode();
+
+ imx_set_mpctl0(mpctl0);
+
+ cscr = CSCR;
+ cscr &= ~CSCR_BCLK_DIV;
+ cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
+ CSCR = cscr;
+
+ if(mpctl0) {
+ CSCR |= CSCR_MPLL_RESTART;
+
+ /* Wait until MPLL is stablized */
+ while( CSCR & CSCR_MPLL_RESTART );
+
+ imx_set_async_mode();
+ }
+
+ local_irq_restore(flags);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
+ freq, mpctl0? "MPLL": "SPLL");
+
+ return 0;
+}
+
+static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+ printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->cur = policy->min = policy->max = imx_get_speed(0);
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.min_freq = 8000;
+ policy->cpuinfo.max_freq = 200000;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ return 0;
+}
+
+static struct cpufreq_driver imx_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = imx_verify_speed,
+ .target = imx_set_target,
+ .get = imx_get_speed,
+ .init = imx_cpufreq_driver_init,
+ .name = "imx",
+};
+
+static int __init imx_cpufreq_init(void)
+{
+
+ mpctl0_at_boot = 0;
+
+ if((CSCR & CSCR_MPEN) &&
+ ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
+ mpctl0_at_boot = MPCTL0;
+
+ return cpufreq_register_driver(&imx_driver);
+}
+
+arch_initcall(imx_cpufreq_init);
+
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clocksource.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/netx-regs.h>
/*
- * Returns number of us since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long netx_gettimeoffset(void)
-{
- return readl(NETX_GPIO_COUNTER_CURRENT(0)) / 100;
-}
-
-/*
* IRQ handler for the timer
*/
static irqreturn_t
write_seqlock(&xtime_lock);
timer_tick();
+
write_sequnlock(&xtime_lock);
/* acknowledge interrupt */
return IRQ_HANDLED;
}
-
static struct irqaction netx_timer_irq = {
.name = "NetX Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = netx_timer_interrupt,
};
+cycle_t netx_get_cycles(void)
+{
+ return readl(NETX_GPIO_COUNTER_CURRENT(1));
+}
+
+static struct clocksource clocksource_netx = {
+ .name = "netx_timer",
+ .rating = 200,
+ .read = netx_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .is_continuous = 1,
+};
+
/*
* Set up timer interrupt
*/
NETX_GPIO_COUNTER_CTRL(0));
setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
+
+ /* Setup timer one for clocksource */
+ writel(0, NETX_GPIO_COUNTER_CTRL(1));
+ writel(0, NETX_GPIO_COUNTER_CURRENT(1));
+ writel(0xFFFFFFFF, NETX_GPIO_COUNTER_MAX(1));
+
+ writel(NETX_GPIO_COUNTER_CTRL_RUN,
+ NETX_GPIO_COUNTER_CTRL(1));
+
+ clocksource_netx.mult =
+ clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift);
+ clocksource_register(&clocksource_netx);
}
struct sys_timer netx_timer = {
- .init = netx_timer_init,
- .offset = netx_gettimeoffset,
+ .init = netx_timer_init,
};
config MACH_OMAP_OSK
bool "TI OSK Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
+ select TPS65010
help
TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
if you have such a board.
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
# Makefile for the linux kernel.
#
-obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o
+obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
obj-m :=
obj-n :=
obj- :=
--- /dev/null
+/*
+ * I2C initialization for PNX4008.
+ *
+ * Author: Vitaly Wool <vitalywool@gmail.com>
+ *
+ * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pnx.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <asm/arch/platform.h>
+#include <asm/arch/i2c.h>
+
+static int set_clock_run(struct platform_device *pdev)
+{
+ struct clk *clk;
+ char name[10];
+ int retval = 0;
+
+ snprintf(name, 10, "i2c%d_ck", pdev->id);
+ clk = clk_get(&pdev->dev, name);
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 1);
+ clk_put(clk);
+ } else
+ retval = -ENOENT;
+
+ return retval;
+}
+
+static int set_clock_stop(struct platform_device *pdev)
+{
+ struct clk *clk;
+ char name[10];
+ int retval = 0;
+
+ snprintf(name, 10, "i2c%d_ck", pdev->id);
+ clk = clk_get(&pdev->dev, name);
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 0);
+ clk_put(clk);
+ } else
+ retval = -ENOENT;
+
+ return retval;
+}
+
+static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int retval = 0;
+#ifdef CONFIG_PM
+ retval = set_clock_run(pdev);
+#endif
+ return retval;
+}
+
+static int i2c_pnx_resume(struct platform_device *pdev)
+{
+ int retval = 0;
+#ifdef CONFIG_PM
+ retval = set_clock_run(pdev);
+#endif
+ return retval;
+}
+
+static u32 calculate_input_freq(struct platform_device *pdev)
+{
+ return HCLK_MHZ;
+}
+
+
+static struct i2c_pnx_algo_data pnx_algo_data0 = {
+ .base = PNX4008_I2C1_BASE,
+ .irq = I2C_1_INT,
+};
+
+static struct i2c_pnx_algo_data pnx_algo_data1 = {
+ .base = PNX4008_I2C2_BASE,
+ .irq = I2C_2_INT,
+};
+
+static struct i2c_pnx_algo_data pnx_algo_data2 = {
+ .base = (PNX4008_USB_CONFIG_BASE + 0x300),
+ .irq = USB_I2C_INT,
+};
+
+static struct i2c_adapter pnx_adapter0 = {
+ .name = I2C_CHIP_NAME "0",
+ .algo_data = &pnx_algo_data0,
+};
+static struct i2c_adapter pnx_adapter1 = {
+ .name = I2C_CHIP_NAME "1",
+ .algo_data = &pnx_algo_data1,
+};
+
+static struct i2c_adapter pnx_adapter2 = {
+ .name = "USB-I2C",
+ .algo_data = &pnx_algo_data2,
+};
+
+static struct i2c_pnx_data i2c0_data = {
+ .suspend = i2c_pnx_suspend,
+ .resume = i2c_pnx_resume,
+ .calculate_input_freq = calculate_input_freq,
+ .set_clock_run = set_clock_run,
+ .set_clock_stop = set_clock_stop,
+ .adapter = &pnx_adapter0,
+};
+
+static struct i2c_pnx_data i2c1_data = {
+ .suspend = i2c_pnx_suspend,
+ .resume = i2c_pnx_resume,
+ .calculate_input_freq = calculate_input_freq,
+ .set_clock_run = set_clock_run,
+ .set_clock_stop = set_clock_stop,
+ .adapter = &pnx_adapter1,
+};
+
+static struct i2c_pnx_data i2c2_data = {
+ .suspend = i2c_pnx_suspend,
+ .resume = i2c_pnx_resume,
+ .calculate_input_freq = calculate_input_freq,
+ .set_clock_run = set_clock_run,
+ .set_clock_stop = set_clock_stop,
+ .adapter = &pnx_adapter2,
+};
+
+static struct platform_device i2c0_device = {
+ .name = "pnx-i2c",
+ .id = 0,
+ .dev = {
+ .platform_data = &i2c0_data,
+ },
+};
+
+static struct platform_device i2c1_device = {
+ .name = "pnx-i2c",
+ .id = 1,
+ .dev = {
+ .platform_data = &i2c1_data,
+ },
+};
+
+static struct platform_device i2c2_device = {
+ .name = "pnx-i2c",
+ .id = 2,
+ .dev = {
+ .platform_data = &i2c2_data,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &i2c0_device,
+ &i2c1_device,
+ &i2c2_device,
+};
+
+void __init pnx4008_register_i2c_devices(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select SHARP_LOCOMO
select PXA_SSP
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
select PXA_SHARP_C7xx
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends PXA_SHARPSL_27x
+ depends on PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
- depends PXA_SHARPSL_25x
+ depends on PXA_SHARPSL_25x
config PXA25x
bool
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/sched.h>
+#include <linux/clocksource.h>
#include <asm/system.h>
#include <asm/hardware.h>
return 0;
}
-/* IRQs are disabled before entering here from do_gettimeofday() */
-static unsigned long pxa_gettimeoffset (void)
-{
- long ticks_to_match, elapsed, usec;
-
- /* Get ticks before next timer match */
- ticks_to_match = OSMR0 - OSCR;
-
- /* We need elapsed ticks since last match */
- elapsed = LATCH - ticks_to_match;
-
- /* don't get fooled by the workaround in pxa_timer_interrupt() */
- if (elapsed <= 0)
- return 0;
-
- /* Now convert them to usec */
- usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
-
- return usec;
-}
-
#ifdef CONFIG_NO_IDLE_HZ
static unsigned long initial_match;
static int match_posponed;
.handler = pxa_timer_interrupt,
};
+cycle_t pxa_get_cycles(void)
+{
+ return OSCR;
+}
+
+static struct clocksource clocksource_pxa = {
+ .name = "pxa_timer",
+ .rating = 200,
+ .read = pxa_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .is_continuous = 1,
+};
+
static void __init pxa_timer_init(void)
{
struct timespec tv;
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
OSMR0 = OSCR + LATCH; /* set initial match */
local_irq_restore(flags);
+
+ /* on PXA OSCR runs continiously and is not written to, so we can use it
+ * as clock source directly.
+ */
+ clocksource_pxa.mult =
+ clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_pxa.shift);
+ clocksource_register(&clocksource_pxa);
+
}
#ifdef CONFIG_NO_IDLE_HZ
.init = pxa_timer_init,
.suspend = pxa_timer_suspend,
.resume = pxa_timer_resume,
- .offset = pxa_gettimeoffset,
#ifdef CONFIG_NO_IDLE_HZ
.dyn_tick = &pxa_dyn_tick,
#endif
.pxafb_backlight_power = board_backlight_power,
};
-static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-}
-
static void __init trizeps4_init(void)
{
platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
- .fixup = trizeps4_fixup,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa_init_irq,
.resource = realview_smc91x_resources,
};
+static struct resource realview_i2c_resource = {
+ .start = REALVIEW_I2C_BASE,
+ .end = REALVIEW_I2C_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+struct platform_device realview_i2c_device = {
+ .name = "versatile-i2c",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &realview_i2c_resource,
+};
+
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
static unsigned int realview_mmc_status(struct device *dev)
extern struct platform_device realview_flash_device;
extern struct platform_device realview_smc91x_device;
+extern struct platform_device realview_i2c_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clk realview_clcd_clk;
platform_device_register(&realview_flash_device);
platform_device_register(&realview_smc91x_device);
+ platform_device_register(&realview_i2c_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
/*
* linux/arch/arm/mach-sa1100/jornada720.c
+ *
+ * HP Jornada720 init code
+ *
+ * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ * Copyright (C) 2005 Michael Gernoth <michael@gernoth.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <video/s1d13xxxfb.h>
#include <asm/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
-
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include "generic.h"
+/*
+ * HP Documentation referred in this file:
+ * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
+ */
+
+/* line 110 of HP's doc */
+#define TUCR_VAL 0x20000400
+
+/* memory space (line 52 of HP's doc) */
+#define SA1111REGSTART 0x40000000
+#define SA1111REGLEN 0x00001fff
+#define EPSONREGSTART 0x48000000
+#define EPSONREGLEN 0x00100000
+#define EPSONFBSTART 0x48200000
+/* 512kB framebuffer */
+#define EPSONFBLEN 512*1024
+
+static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = {
+ /* line 344 of HP's doc */
+ {0x0001,0x00}, // Miscellaneous Register
+ {0x01FC,0x00}, // Display Mode Register
+ {0x0004,0x00}, // General IO Pins Configuration Register 0
+ {0x0005,0x00}, // General IO Pins Configuration Register 1
+ {0x0008,0x00}, // General IO Pins Control Register 0
+ {0x0009,0x00}, // General IO Pins Control Register 1
+ {0x0010,0x01}, // Memory Clock Configuration Register
+ {0x0014,0x11}, // LCD Pixel Clock Configuration Register
+ {0x0018,0x01}, // CRT/TV Pixel Clock Configuration Register
+ {0x001C,0x01}, // MediaPlug Clock Configuration Register
+ {0x001E,0x01}, // CPU To Memory Wait State Select Register
+ {0x0020,0x00}, // Memory Configuration Register
+ {0x0021,0x45}, // DRAM Refresh Rate Register
+ {0x002A,0x01}, // DRAM Timings Control Register 0
+ {0x002B,0x03}, // DRAM Timings Control Register 1
+ {0x0030,0x1c}, // Panel Type Register
+ {0x0031,0x00}, // MOD Rate Register
+ {0x0032,0x4F}, // LCD Horizontal Display Width Register
+ {0x0034,0x07}, // LCD Horizontal Non-Display Period Register
+ {0x0035,0x01}, // TFT FPLINE Start Position Register
+ {0x0036,0x0B}, // TFT FPLINE Pulse Width Register
+ {0x0038,0xEF}, // LCD Vertical Display Height Register 0
+ {0x0039,0x00}, // LCD Vertical Display Height Register 1
+ {0x003A,0x13}, // LCD Vertical Non-Display Period Register
+ {0x003B,0x0B}, // TFT FPFRAME Start Position Register
+ {0x003C,0x01}, // TFT FPFRAME Pulse Width Register
+ {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
+ {0x0041,0x00}, // LCD Miscellaneous Register
+ {0x0042,0x00}, // LCD Display Start Address Register 0
+ {0x0043,0x00}, // LCD Display Start Address Register 1
+ {0x0044,0x00}, // LCD Display Start Address Register 2
+ {0x0046,0x80}, // LCD Memory Address Offset Register 0
+ {0x0047,0x02}, // LCD Memory Address Offset Register 1
+ {0x0048,0x00}, // LCD Pixel Panning Register
+ {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register
+ {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register
+ {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register
+ {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register
+ {0x0053,0x01}, // CRT/TV HRTC Start Position Register
+ {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register
+ {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0
+ {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1
+ {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register
+ {0x0059,0x09}, // CRT/TV VRTC Start Position Register
+ {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register
+ {0x005B,0x10}, // TV Output Control Register
+ {0x0060,0x03}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
+ {0x0062,0x00}, // CRT/TV Display Start Address Register 0
+ {0x0063,0x00}, // CRT/TV Display Start Address Register 1
+ {0x0064,0x00}, // CRT/TV Display Start Address Register 2
+ {0x0066,0x40}, // CRT/TV Memory Address Offset Register 0
+ {0x0067,0x01}, // CRT/TV Memory Address Offset Register 1
+ {0x0068,0x00}, // CRT/TV Pixel Panning Register
+ {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register
+ {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register
+ {0x0070,0x00}, // LCD Ink/Cursor Control Register
+ {0x0071,0x01}, // LCD Ink/Cursor Start Address Register
+ {0x0072,0x00}, // LCD Cursor X Position Register 0
+ {0x0073,0x00}, // LCD Cursor X Position Register 1
+ {0x0074,0x00}, // LCD Cursor Y Position Register 0
+ {0x0075,0x00}, // LCD Cursor Y Position Register 1
+ {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register
+ {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register
+ {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register
+ {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register
+ {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register
+ {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register
+ {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register
+ {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register
+ {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register
+ {0x0082,0x00}, // CRT/TV Cursor X Position Register 0
+ {0x0083,0x00}, // CRT/TV Cursor X Position Register 1
+ {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0
+ {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1
+ {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register
+ {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register
+ {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register
+ {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register
+ {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register
+ {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register
+ {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register
+ {0x0100,0x00}, // BitBlt Control Register 0
+ {0x0101,0x00}, // BitBlt Control Register 1
+ {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register
+ {0x0103,0x00}, // BitBlt Operation Register
+ {0x0104,0x00}, // BitBlt Source Start Address Register 0
+ {0x0105,0x00}, // BitBlt Source Start Address Register 1
+ {0x0106,0x00}, // BitBlt Source Start Address Register 2
+ {0x0108,0x00}, // BitBlt Destination Start Address Register 0
+ {0x0109,0x00}, // BitBlt Destination Start Address Register 1
+ {0x010A,0x00}, // BitBlt Destination Start Address Register 2
+ {0x010C,0x00}, // BitBlt Memory Address Offset Register 0
+ {0x010D,0x00}, // BitBlt Memory Address Offset Register 1
+ {0x0110,0x00}, // BitBlt Width Register 0
+ {0x0111,0x00}, // BitBlt Width Register 1
+ {0x0112,0x00}, // BitBlt Height Register 0
+ {0x0113,0x00}, // BitBlt Height Register 1
+ {0x0114,0x00}, // BitBlt Background Color Register 0
+ {0x0115,0x00}, // BitBlt Background Color Register 1
+ {0x0118,0x00}, // BitBlt Foreground Color Register 0
+ {0x0119,0x00}, // BitBlt Foreground Color Register 1
+ {0x01E0,0x00}, // Look-Up Table Mode Register
+ {0x01E2,0x00}, // Look-Up Table Address Register
+ /* not sure, wouldn't like to mess with the driver */
+ {0x01E4,0x00}, // Look-Up Table Data Register
+ /* jornada doc says 0x00, but I trust the driver */
+ {0x01F0,0x10}, // Power Save Configuration Register
+ {0x01F1,0x00}, // Power Save Status Register
+ {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register
+ {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
+};
+
+static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
+ .initregs = s1d13xxxfb_initregs,
+ .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs),
+ .platform_init_video = NULL
+};
-#define JORTUCR_VAL 0x20000400
+static struct resource s1d13xxxfb_resources[] = {
+ [0] = {
+ .start = EPSONFBSTART,
+ .end = EPSONFBSTART + EPSONFBLEN,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = EPSONREGSTART,
+ .end = EPSONREGSTART + EPSONREGLEN,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device s1d13xxxfb_device = {
+ .name = S1D_DEVICENAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &s1d13xxxfb_data,
+ },
+ .num_resources = ARRAY_SIZE(s1d13xxxfb_resources),
+ .resource = s1d13xxxfb_resources,
+};
static struct resource sa1111_resources[] = {
[0] = {
- .start = 0x40000000,
- .end = 0x40001fff,
+ .start = SA1111REGSTART,
+ .end = SA1111REGSTART + SA1111REGLEN,
.flags = IORESOURCE_MEM,
},
[1] = {
.resource = sa1111_resources,
};
+static struct platform_device jornada720_mcu_device = {
+ .name = "jornada720_mcu",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
+ &jornada720_mcu_device,
+ &s1d13xxxfb_device,
};
+/* a stub for now, we theoretically cannot suspend without a flashboard */
+int pm_suspend(suspend_state_t state)
+{
+ return -1;
+}
+
static int __init jornada720_init(void)
{
int ret = -ENODEV;
if (machine_is_jornada720()) {
GPDR |= GPIO_GPIO20;
- TUCR = JORTUCR_VAL; /* set the oscillator out to the SA-1101 */
-
+ /* oscillator setup (line 116 of HP's doc) */
+ TUCR = TUCR_VAL;
+ /* resetting SA1111 (line 118 of HP's doc) */
GPSR = GPIO_GPIO20;
udelay(1);
GPCR = GPIO_GPIO20;
GPSR = GPIO_GPIO20;
udelay(20);
- /* LDD4 is speaker, LDD3 is microphone */
- PPSR &= ~(PPC_LDD3 | PPC_LDD4);
- PPDR |= PPC_LDD3 | PPC_LDD4;
-
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
return ret;
static struct map_desc jornada720_io_desc[] __initdata = {
{ /* Epson registers */
- .virtual = 0xf0000000,
- .pfn = __phys_to_pfn(0x48000000),
- .length = 0x00100000,
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(EPSONREGSTART),
+ .length = EPSONREGLEN,
.type = MT_DEVICE
}, { /* Epson frame buffer */
- .virtual = 0xf1000000,
- .pfn = __phys_to_pfn(0x48200000),
- .length = 0x00100000,
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(EPSONFBSTART),
+ .length = EPSONFBLEN,
.type = MT_DEVICE
}, { /* SA-1111 */
- .virtual = 0xf4000000,
- .pfn = __phys_to_pfn(0x40000000),
- .length = 0x00100000,
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(SA1111REGSTART),
+ .length = SA1111REGLEN,
.type = MT_DEVICE
}
};
{
sa1100_map_io();
iotable_init(jornada720_io_desc, ARRAY_SIZE(jornada720_io_desc));
-
+
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 1);
}
.name = "JORNADA720 boot firmware",
.size = 0x00040000,
.offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "JORNADA720 kernel",
.size = 0x000c0000,
.offset = 0x00540000,
}, {
.name = "JORNADA720 usr local",
- .size = 0, /* will expand to the end of the flash */
+ .size = 0, /* will expand to the end of the flash */
.offset = 0x00d00000,
}
};
static void jornada720_set_vpp(int vpp)
{
if (vpp)
- PPSR |= 0x80;
+ /* enabling flash write (line 470 of HP's doc) */
+ PPSR |= PPC_LDD7;
else
- PPSR &= ~0x80;
- PPDR |= 0x80;
+ /* disabling flash write (line 470 of HP's doc) */
+ PPSR &= ~PPC_LDD7;
+ PPDR |= PPC_LDD7;
}
static struct flash_platform_data jornada720_flash_data = {
.resource = smc91x_resources,
};
+static struct resource versatile_i2c_resource = {
+ .start = VERSATILE_I2C_BASE,
+ .end = VERSATILE_I2C_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device versatile_i2c_device = {
+ .name = "versatile-i2c",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &versatile_i2c_resource,
+};
+
#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
unsigned int mmc_status(struct device *dev)
clk_register(&versatile_clcd_clk);
platform_device_register(&versatile_flash_device);
+ platform_device_register(&versatile_i2c_device);
platform_device_register(&smc91x_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
* x86 does not mark the pages reserved...
*/
SetPageReserved(page);
- set_pte(pte, mk_pte(page, prot));
+ set_pte_ext(pte, mk_pte(page, prot), 0);
page++;
pte++;
off++;
{
spin_lock(&minicache_lock);
- set_pte(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot));
+ set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0);
flush_tlb_kernel_page(0xffff8000);
mc_copy_user_page((void *)0xffff8000, kto);
*/
spin_lock(&v6_lock);
- set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL));
- set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL));
+ set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL), 0);
+ set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL), 0);
from = from_address + (offset << PAGE_SHIFT);
to = to_address + (offset << PAGE_SHIFT);
*/
spin_lock(&v6_lock);
- set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL));
+ set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL), 0);
flush_tlb_kernel_page(to);
clear_page((void *)to);
{
spin_lock(&minicache_lock);
- set_pte(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot));
+ set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0);
flush_tlb_kernel_page(COPYPAGE_MINICACHE);
mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
if (pte_present(entry) && pte_val(entry) & shared_pte_mask) {
flush_cache_page(vma, address, pte_pfn(entry));
pte_val(entry) &= ~shared_pte_mask;
- set_pte(pte, entry);
+ set_pte_at(vma->vm_mm, address, pte, entry);
flush_tlb_page(vma, address);
ret = 1;
}
unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
const int zero = 0;
- set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
+ set_pte_ext(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL), 0);
flush_tlb_kernel_page(to);
asm( "mcrr p15, 0, %1, %0, c14\n"
*/
#define VM_ARM_SECTION_MAPPING 0x80000000
-static inline void
-remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
- unsigned long phys_addr, pgprot_t pgprot)
+static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end,
+ unsigned long phys_addr, pgprot_t prot)
{
- unsigned long end;
+ pte_t *pte;
+
+ pte = pte_alloc_kernel(pmd, addr);
+ if (!pte)
+ return -ENOMEM;
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- BUG_ON(address >= end);
do {
if (!pte_none(*pte))
goto bad;
- set_pte(pte, pfn_pte(phys_addr >> PAGE_SHIFT, pgprot));
- address += PAGE_SIZE;
+ set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0);
phys_addr += PAGE_SIZE;
- pte++;
- } while (address && (address < end));
- return;
+ } while (pte++, addr += PAGE_SIZE, addr != end);
+ return 0;
bad:
- printk("remap_area_pte: page already exists\n");
+ printk(KERN_CRIT "remap_area_pte: page already exists\n");
BUG();
}
-static inline int
-remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
- unsigned long phys_addr, unsigned long flags)
+static inline int remap_area_pmd(pgd_t *pgd, unsigned long addr,
+ unsigned long end, unsigned long phys_addr,
+ pgprot_t prot)
{
- unsigned long end;
- pgprot_t pgprot;
-
- address &= ~PGDIR_MASK;
- end = address + size;
+ unsigned long next;
+ pmd_t *pmd;
+ int ret = 0;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
+ pmd = pmd_alloc(&init_mm, pgd, addr);
+ if (!pmd)
+ return -ENOMEM;
- phys_addr -= address;
- BUG_ON(address >= end);
-
- pgprot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_WRITE | flags);
do {
- pte_t * pte = pte_alloc_kernel(pmd, address);
- if (!pte)
- return -ENOMEM;
- remap_area_pte(pte, address, end - address, address + phys_addr, pgprot);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address && (address < end));
- return 0;
+ next = pmd_addr_end(addr, end);
+ ret = remap_area_pte(pmd, addr, next, phys_addr, prot);
+ if (ret)
+ return ret;
+ phys_addr += next - addr;
+ } while (pmd++, addr = next, addr != end);
+ return ret;
}
-static int
-remap_area_pages(unsigned long start, unsigned long pfn,
- unsigned long size, unsigned long flags)
+static int remap_area_pages(unsigned long start, unsigned long pfn,
+ unsigned long size, unsigned long flags)
{
- unsigned long address = start;
- unsigned long end = start + size;
+ unsigned long addr = start;
+ unsigned long next, end = start + size;
unsigned long phys_addr = __pfn_to_phys(pfn);
+ pgprot_t prot = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
+ L_PTE_DIRTY | L_PTE_WRITE | flags);
+ pgd_t *pgd;
int err = 0;
- pgd_t * dir;
- phys_addr -= address;
- dir = pgd_offset(&init_mm, address);
- BUG_ON(address >= end);
+ BUG_ON(addr >= end);
+ pgd = pgd_offset_k(addr);
do {
- pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
- if (!pmd) {
- err = -ENOMEM;
- break;
- }
- if (remap_area_pmd(pmd, address, end - address,
- phys_addr + address, flags)) {
- err = -ENOMEM;
+ next = pgd_addr_end(addr, end);
+ err = remap_area_pmd(pgd, addr, next, phys_addr, prot);
+ if (err)
break;
- }
-
- address = (address + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- } while (address && (address < end));
+ phys_addr += next - addr;
+ } while (pgd++, addr = next, addr != end);
return err;
}
mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
- /*
- * User pages need to be mapped with the ASID
- * (iow, non-global)
- */
- user_pgprot |= L_PTE_ASID;
-
#ifdef CONFIG_SMP
/*
* Mark memory with the "shared" attribute for SMP systems
}
ptep = pte_offset_kernel(pmdp, virt);
- set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
+ set_pte_ext(ptep, pfn_pte(phys >> PAGE_SHIFT, prot), 0);
}
/*
init_pmd = pmd_offset(init_pgd, 0);
init_pte = pte_offset_map_nested(init_pmd, 0);
- set_pte(new_pte, *init_pte);
+ set_pte_ext(new_pte, *init_pte, 0);
pte_unmap_nested(init_pte);
pte_unmap(new_pte);
}
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm1020_set_pte)
+ENTRY(cpu_arm1020_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm1020_do_idle
.word cpu_arm1020_dcache_clean_area
.word cpu_arm1020_switch_mm
- .word cpu_arm1020_set_pte
+ .word cpu_arm1020_set_pte_ext
.size arm1020_processor_functions, . - arm1020_processor_functions
.section ".rodata"
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm1020e_set_pte)
+ENTRY(cpu_arm1020e_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm1020e_do_idle
.word cpu_arm1020e_dcache_clean_area
.word cpu_arm1020e_switch_mm
- .word cpu_arm1020e_set_pte
+ .word cpu_arm1020e_set_pte_ext
.size arm1020e_processor_functions, . - arm1020e_processor_functions
.section ".rodata"
mov pc, lr
/*
- * cpu_arm1022_set_pte(ptep, pte)
+ * cpu_arm1022_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm1022_set_pte)
+ENTRY(cpu_arm1022_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm1022_do_idle
.word cpu_arm1022_dcache_clean_area
.word cpu_arm1022_switch_mm
- .word cpu_arm1022_set_pte
+ .word cpu_arm1022_set_pte_ext
.size arm1022_processor_functions, . - arm1022_processor_functions
.section ".rodata"
mov pc, lr
/*
- * cpu_arm1026_set_pte(ptep, pte)
+ * cpu_arm1026_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm1026_set_pte)
+ENTRY(cpu_arm1026_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm1026_do_idle
.word cpu_arm1026_dcache_clean_area
.word cpu_arm1026_switch_mm
- .word cpu_arm1026_set_pte
+ .word cpu_arm1026_set_pte_ext
.size arm1026_processor_functions, . - arm1026_processor_functions
.section .rodata
mov pc, lr
/*
- * Function: arm6_7_set_pte(pte_t *ptep, pte_t pte)
+ * Function: arm6_7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
* Params : r0 = Address to set
* : r1 = value to set
* Purpose : Set a PTE and flush it out of any WB cache
*/
.align 5
-ENTRY(cpu_arm6_set_pte)
-ENTRY(cpu_arm7_set_pte)
+ENTRY(cpu_arm6_set_pte_ext)
+ENTRY(cpu_arm7_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm6_do_idle
.word cpu_arm6_dcache_clean_area
.word cpu_arm6_switch_mm
- .word cpu_arm6_set_pte
+ .word cpu_arm6_set_pte_ext
.size arm6_processor_functions, . - arm6_processor_functions
/*
.word cpu_arm7_do_idle
.word cpu_arm7_dcache_clean_area
.word cpu_arm7_switch_mm
- .word cpu_arm7_set_pte
+ .word cpu_arm7_set_pte_ext
.size arm7_processor_functions, . - arm7_processor_functions
.section ".rodata"
mov pc, lr
/*
- * Function: arm720_set_pte(pte_t *ptep, pte_t pte)
+ * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
* Params : r0 = Address to set
* : r1 = value to set
* Purpose : Set a PTE and flush it out of any WB cache
*/
.align 5
-ENTRY(cpu_arm720_set_pte)
+ENTRY(cpu_arm720_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm720_do_idle
.word cpu_arm720_dcache_clean_area
.word cpu_arm720_switch_mm
- .word cpu_arm720_set_pte
+ .word cpu_arm720_set_pte_ext
.size arm720_processor_functions, . - arm720_processor_functions
.section ".rodata"
mov pc, lr
/*
- * cpu_arm920_set_pte(ptep, pte)
+ * cpu_arm920_set_pte(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm920_set_pte)
+ENTRY(cpu_arm920_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm920_do_idle
.word cpu_arm920_dcache_clean_area
.word cpu_arm920_switch_mm
- .word cpu_arm920_set_pte
+ .word cpu_arm920_set_pte_ext
.size arm920_processor_functions, . - arm920_processor_functions
.section ".rodata"
mov pc, lr
/*
- * cpu_arm922_set_pte(ptep, pte)
+ * cpu_arm922_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm922_set_pte)
+ENTRY(cpu_arm922_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm922_do_idle
.word cpu_arm922_dcache_clean_area
.word cpu_arm922_switch_mm
- .word cpu_arm922_set_pte
+ .word cpu_arm922_set_pte_ext
.size arm922_processor_functions, . - arm922_processor_functions
.section ".rodata"
mov pc, lr
/*
- * cpu_arm925_set_pte(ptep, pte)
+ * cpu_arm925_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm925_set_pte)
+ENTRY(cpu_arm925_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm925_do_idle
.word cpu_arm925_dcache_clean_area
.word cpu_arm925_switch_mm
- .word cpu_arm925_set_pte
+ .word cpu_arm925_set_pte_ext
.size arm925_processor_functions, . - arm925_processor_functions
.section ".rodata"
mov pc, lr
/*
- * cpu_arm926_set_pte(ptep, pte)
+ * cpu_arm926_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_arm926_set_pte)
+ENTRY(cpu_arm926_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_arm926_do_idle
.word cpu_arm926_dcache_clean_area
.word cpu_arm926_switch_mm
- .word cpu_arm926_set_pte
+ .word cpu_arm926_set_pte_ext
.size arm926_processor_functions, . - arm926_processor_functions
.section ".rodata"
b __arm926_setup
.long cpu_arch_name
.long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
.long cpu_arm926_name
.long arm926_processor_functions
.long v4wbi_tlb_fns
#endif
/*
- * cpu_sa110_set_pte(ptep, pte)
+ * cpu_sa110_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_sa110_set_pte)
+ENTRY(cpu_sa110_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_sa110_do_idle
.word cpu_sa110_dcache_clean_area
.word cpu_sa110_switch_mm
- .word cpu_sa110_set_pte
+ .word cpu_sa110_set_pte_ext
.size sa110_processor_functions, . - sa110_processor_functions
.section ".rodata"
#endif
/*
- * cpu_sa1100_set_pte(ptep, pte)
+ * cpu_sa1100_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
-ENTRY(cpu_sa1100_set_pte)
+ENTRY(cpu_sa1100_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
.word cpu_sa1100_do_idle
.word cpu_sa1100_dcache_clean_area
.word cpu_sa1100_switch_mm
- .word cpu_sa1100_set_pte
+ .word cpu_sa1100_set_pte_ext
.size sa1100_processor_functions, . - sa1100_processor_functions
.section ".rodata"
#ifndef MULTI_CPU
EXPORT_SYMBOL(cpu_dcache_clean_area);
-EXPORT_SYMBOL(cpu_set_pte);
+EXPORT_SYMBOL(cpu_set_pte_ext);
#else
EXPORT_SYMBOL(processor);
#endif
mov pc, lr
/*
- * cpu_v6_set_pte(ptep, pte)
+ * cpu_v6_set_pte_ext(ptep, pte, ext)
*
* Set a level 2 translation table entry.
*
* - ptep - pointer to level 2 translation table entry
* (hardware version is stored at -1024 bytes)
* - pte - PTE value to store
+ * - ext - value for extended PTE bits
*
* Permissions:
* YUWD APX AP1 AP0 SVC User
* 11x0 0 1 0 r/w r/o
* 1111 0 1 1 r/w r/w
*/
-ENTRY(cpu_v6_set_pte)
+ENTRY(cpu_v6_set_pte_ext)
#ifdef CONFIG_MMU
str r1, [r0], #-2048 @ linux version
- bic r2, r1, #0x000003f0
- bic r2, r2, #0x00000003
- orr r2, r2, #PTE_EXT_AP0 | 2
+ bic r3, r1, #0x000003f0
+ bic r3, r3, #0x00000003
+ orr r3, r3, r2
+ orr r3, r3, #PTE_EXT_AP0 | 2
tst r1, #L_PTE_WRITE
tstne r1, #L_PTE_DIRTY
- orreq r2, r2, #PTE_EXT_APX
+ orreq r3, r3, #PTE_EXT_APX
tst r1, #L_PTE_USER
- orrne r2, r2, #PTE_EXT_AP1
- tstne r2, #PTE_EXT_APX
- bicne r2, r2, #PTE_EXT_APX | PTE_EXT_AP0
+ orrne r3, r3, #PTE_EXT_AP1
+ tstne r3, #PTE_EXT_APX
+ bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
tst r1, #L_PTE_YOUNG
- biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK
+ biceq r3, r3, #PTE_EXT_APX | PTE_EXT_AP_MASK
tst r1, #L_PTE_EXEC
- orreq r2, r2, #PTE_EXT_XN
+ orreq r3, r3, #PTE_EXT_XN
tst r1, #L_PTE_PRESENT
- moveq r2, #0
+ moveq r3, #0
- str r2, [r0]
+ str r3, [r0]
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
#endif
mov pc, lr
cpu_v6_name:
- .asciz "Some Random V6 Processor"
+ .asciz "ARMv6-compatible processor"
.align
.section ".text.init", #alloc, #execinstr
#endif
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
#endif /* CONFIG_MMU */
-#ifdef CONFIG_VFP
- mrc p15, 0, r0, c1, c0, 2
- orr r0, r0, #(0xf << 20)
- mcr p15, 0, r0, c1, c0, 2 @ Enable full access to VFP
-#endif
adr r5, v6_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ read control register
.word cpu_v6_do_idle
.word cpu_v6_dcache_clean_area
.word cpu_v6_switch_mm
- .word cpu_v6_set_pte
+ .word cpu_v6_set_pte_ext
.size v6_processor_functions, . - v6_processor_functions
.type cpu_arch_name, #object
b __v6_setup
.long cpu_arch_name
.long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
.long cpu_v6_name
.long v6_processor_functions
.long v6wbi_tlb_fns
cpwait_ret lr, ip
/*
- * cpu_xsc3_set_pte(ptep, pte)
+ * cpu_xsc3_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*
*/
.align 5
-ENTRY(cpu_xsc3_set_pte)
+ENTRY(cpu_xsc3_set_pte_ext)
str r1, [r0], #-2048 @ linux version
bic r2, r1, #0xff0 @ Keep C, B bits
.word cpu_xsc3_do_idle
.word cpu_xsc3_dcache_clean_area
.word cpu_xsc3_switch_mm
- .word cpu_xsc3_set_pte
+ .word cpu_xsc3_set_pte_ext
.size xsc3_processor_functions, . - xsc3_processor_functions
.section ".rodata"
cpwait_ret lr, ip
/*
- * cpu_xscale_set_pte(ptep, pte)
+ * cpu_xscale_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*
* Errata 40: must set memory to write-through for user read-only pages.
*/
.align 5
-ENTRY(cpu_xscale_set_pte)
+ENTRY(cpu_xscale_set_pte_ext)
str r1, [r0], #-2048 @ linux version
bic r2, r1, #0xff0
.word cpu_xscale_do_idle
.word cpu_xscale_dcache_clean_area
.word cpu_xscale_switch_mm
- .word cpu_xscale_set_pte
+ .word cpu_xscale_set_pte_ext
.size xscale_processor_functions, . - xscale_processor_functions
.section ".rodata"
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends OMAP_MUX
+ depends on OMAP_MUX
default y
help
Select this option if you want to have your system wake up
if (exceptions)
vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
}
-
+
/*
* VFP support code initialisation.
*/
static int __init vfp_init(void)
{
unsigned int vfpsid;
+ unsigned int cpu_arch = cpu_architecture();
+ u32 access = 0;
+
+ if (cpu_arch >= CPU_ARCH_ARMv6) {
+ access = get_copro_access();
+
+ /*
+ * Enable full access to VFP (cp10 and cp11)
+ */
+ set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
+ }
/*
* First check that there is a VFP that we can use.
printk(KERN_INFO "VFP support v0.3: ");
if (VFP_arch) {
printk("not present\n");
+
+ /*
+ * Restore the copro access register.
+ */
+ if (cpu_arch >= CPU_ARCH_ARMv6)
+ set_copro_access(access);
} else if (vfpsid & FPSID_NODOUBLE) {
printk("no double precision support\n");
} else {
(vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT,
(vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT,
(vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT);
+
vfp_vector = vfp_support_entry;
thread_register_notifier(&vfp_notifier_block);
+
+ /*
+ * We detected VFP, and the support code is
+ * in place; report VFP support to userspace.
+ */
+ elf_hwcap |= HWCAP_VFP;
}
return 0;
}
config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_HWEIGHT
bool
default y
}
if (c_id(&excd) == 0x80) { /* loader */
if (!ec->loader) {
- ec->loader = (loader_t)kmalloc(c_len(&excd),
+ ec->loader = kmalloc(c_len(&excd),
GFP_KERNEL);
if (ec->loader)
ecard_readbytes(ec->loader, ec,
(irq_flags & IRQF_SHARED && !dev_id))
return -EINVAL;
- action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
+ action = kmalloc(sizeof(struct irqaction), GFP_KERNEL);
if (!action)
return -ENOMEM;
config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_BUST_SPINLOCK
bool
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/setup.h>
#include <asm/arch/board.h>
#include <asm/arch/init.h>
-struct eth_platform_data __initdata eth0_data = {
- .valid = 1,
- .mii_phy_addr = 0x10,
- .is_rmii = 0,
- .hw_addr = { 0x6a, 0x87, 0x71, 0x14, 0xcd, 0xcb },
+struct eth_addr {
+ u8 addr[6];
};
+static struct eth_addr __initdata hw_addr[2];
+
+static struct eth_platform_data __initdata eth_data[2];
extern struct lcdc_platform_data atstk1000_fb0_data;
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+ int i;
+
+ i = tag->u.ethernet.mac_index;
+ if (i < ARRAY_SIZE(hw_addr))
+ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+ sizeof(hw_addr[i].addr));
+
+ return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ const u8 *addr;
+ void __iomem *regs;
+ struct clk *pclk;
+
+ if (!res)
+ return;
+ if (pdev->id >= ARRAY_SIZE(hw_addr))
+ return;
+
+ addr = hw_addr[pdev->id].addr;
+ if (!is_valid_ether_addr(addr))
+ return;
+
+ /*
+ * Since this is board-specific code, we'll cheat and use the
+ * physical address directly as we happen to know that it's
+ * the same as the virtual address.
+ */
+ regs = (void __iomem __force *)res->start;
+ pclk = clk_get(&pdev->dev, "pclk");
+ if (!pclk)
+ return;
+
+ clk_enable(pclk);
+ __raw_writel((addr[3] << 24) | (addr[2] << 16)
+ | (addr[1] << 8) | addr[0], regs + 0x98);
+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+ clk_disable(pclk);
+ clk_put(pclk);
+}
+
void __init setup_board(void)
{
at32_map_usart(1, 0); /* /dev/ttyS0 */
at32_add_device_usart(1);
at32_add_device_usart(2);
- at32_add_device_eth(0, ð0_data);
+ set_hw_addr(at32_add_device_eth(0, ð_data[0]));
+
at32_add_device_spi(0);
at32_add_device_lcdc(0, &atstk1000_fb0_data);
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <asm/checksum.h>
#include <asm/uaccess.h>
-#include <asm/delay.h>
/*
* GCC functions
void machine_halt(void)
{
+ /*
+ * Enter Stop mode. The 32 kHz oscillator will keep running so
+ * the RTC will keep the time properly and the system will
+ * boot quickly.
+ */
+ asm volatile("sleep 3\n\t"
+ "sub pc, -2");
}
void machine_power_off(void)
}
__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
-static int __init parse_tag_ethernet(struct tag *tag)
-{
-#if 0
- const struct platform_device *pdev;
-
- /*
- * We really need a bus type that supports "classes"...this
- * will do for now (until we must handle other kinds of
- * ethernet controllers)
- */
- pdev = platform_get_device("macb", tag->u.ethernet.mac_index);
- if (pdev && pdev->dev.platform_data) {
- struct eth_platform_data *data = pdev->dev.platform_data;
-
- data->valid = 1;
- data->mii_phy_addr = tag->u.ethernet.mii_phy_addr;
- memcpy(data->hw_addr, tag->u.ethernet.hw_address,
- sizeof(data->hw_addr));
- }
-#endif
- return 0;
-}
-__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
-
/*
* Scan the tag table for this tag, and call its parse function. The
* tag table is built by the linker from all the __tagtable
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/param.h>
#include <linux/types.h>
-#include <asm/delay.h>
#include <asm/processor.h>
#include <asm/sysreg.h>
#include <asm/io.h>
+#include <asm/arch/at32ap7000.h>
#include <asm/arch/board.h>
#include <asm/arch/portmux.h>
#include <asm/arch/sm.h>
.num_resources = ARRAY_SIZE(_name##_id##_resource), \
}
+#define select_peripheral(pin, periph, flags) \
+ at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+
#define DEV_CLK(_name, devname, bus, _index) \
static struct clk devname##_##_name = { \
.name = #_name, \
.index = _index, \
}
-enum {
- PIOA,
- PIOB,
- PIOC,
- PIOD,
-};
-
-enum {
- FUNC_A,
- FUNC_B,
-};
-
unsigned long at32ap7000_osc_rates[3] = {
[0] = 32768,
/* FIXME: these are ATSTK1002-specific */
static inline void configure_usart0_pins(void)
{
- portmux_set_func(PIOA, 8, FUNC_B); /* RXD */
- portmux_set_func(PIOA, 9, FUNC_B); /* TXD */
+ select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
+ select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
}
static inline void configure_usart1_pins(void)
{
- portmux_set_func(PIOA, 17, FUNC_A); /* RXD */
- portmux_set_func(PIOA, 18, FUNC_A); /* TXD */
+ select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
+ select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
}
static inline void configure_usart2_pins(void)
{
- portmux_set_func(PIOB, 26, FUNC_B); /* RXD */
- portmux_set_func(PIOB, 27, FUNC_B); /* TXD */
+ select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
+ select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
}
static inline void configure_usart3_pins(void)
{
- portmux_set_func(PIOB, 18, FUNC_B); /* RXD */
- portmux_set_func(PIOB, 17, FUNC_B); /* TXD */
+ select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
+ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
}
static struct platform_device *at32_usarts[4];
DEV_CLK(hclk, macb0, hsb, 8);
DEV_CLK(pclk, macb0, pbb, 6);
+static struct eth_platform_data macb1_data;
+static struct resource macb1_resource[] = {
+ PBMEM(0xfff01c00),
+ IRQ(26),
+};
+DEFINE_DEV_DATA(macb, 1);
+DEV_CLK(hclk, macb1, hsb, 9);
+DEV_CLK(pclk, macb1, pbb, 7);
+
struct platform_device *__init
at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
{
case 0:
pdev = &macb0_device;
- portmux_set_func(PIOC, 3, FUNC_A); /* TXD0 */
- portmux_set_func(PIOC, 4, FUNC_A); /* TXD1 */
- portmux_set_func(PIOC, 7, FUNC_A); /* TXEN */
- portmux_set_func(PIOC, 8, FUNC_A); /* TXCK */
- portmux_set_func(PIOC, 9, FUNC_A); /* RXD0 */
- portmux_set_func(PIOC, 10, FUNC_A); /* RXD1 */
- portmux_set_func(PIOC, 13, FUNC_A); /* RXER */
- portmux_set_func(PIOC, 15, FUNC_A); /* RXDV */
- portmux_set_func(PIOC, 16, FUNC_A); /* MDC */
- portmux_set_func(PIOC, 17, FUNC_A); /* MDIO */
+ select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
+ select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
+ select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
+ select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
+ select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
+ select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
+ select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
+ select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
+ select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
+ select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
+
+ if (!data->is_rmii) {
+ select_peripheral(PC(0), PERIPH_A, 0); /* COL */
+ select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
+ select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
+ select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
+ select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
+ select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
+ select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
+ select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
+ select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
+ }
+ break;
+
+ case 1:
+ pdev = &macb1_device;
+
+ select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
+ select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
+ select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
+ select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
+ select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
+ select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
+ select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
+ select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
+ select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
+ select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
if (!data->is_rmii) {
- portmux_set_func(PIOC, 0, FUNC_A); /* COL */
- portmux_set_func(PIOC, 1, FUNC_A); /* CRS */
- portmux_set_func(PIOC, 2, FUNC_A); /* TXER */
- portmux_set_func(PIOC, 5, FUNC_A); /* TXD2 */
- portmux_set_func(PIOC, 6, FUNC_A); /* TXD3 */
- portmux_set_func(PIOC, 11, FUNC_A); /* RXD2 */
- portmux_set_func(PIOC, 12, FUNC_A); /* RXD3 */
- portmux_set_func(PIOC, 14, FUNC_A); /* RXCK */
- portmux_set_func(PIOC, 18, FUNC_A); /* SPD */
+ select_peripheral(PC(19), PERIPH_B, 0); /* COL */
+ select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
+ select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
+ select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
+ select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
+ select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
+ select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
+ select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
+ select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
}
break;
switch (id) {
case 0:
pdev = &spi0_device;
- portmux_set_func(PIOA, 0, FUNC_A); /* MISO */
- portmux_set_func(PIOA, 1, FUNC_A); /* MOSI */
- portmux_set_func(PIOA, 2, FUNC_A); /* SCK */
- portmux_set_func(PIOA, 3, FUNC_A); /* NPCS0 */
- portmux_set_func(PIOA, 4, FUNC_A); /* NPCS1 */
- portmux_set_func(PIOA, 5, FUNC_A); /* NPCS2 */
+ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
+ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
+ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+ select_peripheral(PA(3), PERIPH_A, 0); /* NPCS0 */
+ select_peripheral(PA(4), PERIPH_A, 0); /* NPCS1 */
+ select_peripheral(PA(5), PERIPH_A, 0); /* NPCS2 */
break;
default:
switch (id) {
case 0:
pdev = &lcdc0_device;
- portmux_set_func(PIOC, 19, FUNC_A); /* CC */
- portmux_set_func(PIOC, 20, FUNC_A); /* HSYNC */
- portmux_set_func(PIOC, 21, FUNC_A); /* PCLK */
- portmux_set_func(PIOC, 22, FUNC_A); /* VSYNC */
- portmux_set_func(PIOC, 23, FUNC_A); /* DVAL */
- portmux_set_func(PIOC, 24, FUNC_A); /* MODE */
- portmux_set_func(PIOC, 25, FUNC_A); /* PWR */
- portmux_set_func(PIOC, 26, FUNC_A); /* DATA0 */
- portmux_set_func(PIOC, 27, FUNC_A); /* DATA1 */
- portmux_set_func(PIOC, 28, FUNC_A); /* DATA2 */
- portmux_set_func(PIOC, 29, FUNC_A); /* DATA3 */
- portmux_set_func(PIOC, 30, FUNC_A); /* DATA4 */
- portmux_set_func(PIOC, 31, FUNC_A); /* DATA5 */
- portmux_set_func(PIOD, 0, FUNC_A); /* DATA6 */
- portmux_set_func(PIOD, 1, FUNC_A); /* DATA7 */
- portmux_set_func(PIOD, 2, FUNC_A); /* DATA8 */
- portmux_set_func(PIOD, 3, FUNC_A); /* DATA9 */
- portmux_set_func(PIOD, 4, FUNC_A); /* DATA10 */
- portmux_set_func(PIOD, 5, FUNC_A); /* DATA11 */
- portmux_set_func(PIOD, 6, FUNC_A); /* DATA12 */
- portmux_set_func(PIOD, 7, FUNC_A); /* DATA13 */
- portmux_set_func(PIOD, 8, FUNC_A); /* DATA14 */
- portmux_set_func(PIOD, 9, FUNC_A); /* DATA15 */
- portmux_set_func(PIOD, 10, FUNC_A); /* DATA16 */
- portmux_set_func(PIOD, 11, FUNC_A); /* DATA17 */
- portmux_set_func(PIOD, 12, FUNC_A); /* DATA18 */
- portmux_set_func(PIOD, 13, FUNC_A); /* DATA19 */
- portmux_set_func(PIOD, 14, FUNC_A); /* DATA20 */
- portmux_set_func(PIOD, 15, FUNC_A); /* DATA21 */
- portmux_set_func(PIOD, 16, FUNC_A); /* DATA22 */
- portmux_set_func(PIOD, 17, FUNC_A); /* DATA23 */
+ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
+ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
+ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
+ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
+ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
+ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
+ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
+ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
+ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
+ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
+ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
+ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
+ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
+ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
+ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
+ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
+ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
+ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
+ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
clk_set_parent(&lcdc0_pixclk, &pll0);
clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0));
&atmel_usart3_usart,
&macb0_hclk,
&macb0_pclk,
+ &macb1_hclk,
+ &macb1_pclk,
&spi0_mck,
&lcdc0_hclk,
&lcdc0_pixclk,
static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
{
struct at32_sm *sm = get_irq_chip_data(irq);
+ struct irq_desc *desc;
unsigned int i = irq - sm->eim_first_irq;
u32 mode, edge, level;
unsigned long flags;
int ret = 0;
- flow_type &= IRQ_TYPE_SENSE_MASK;
+ if (flow_type == IRQ_TYPE_NONE)
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+
+ desc = &irq_desc[irq];
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+
+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
+ desc->status |= IRQ_LEVEL;
+ set_irq_handler(irq, handle_level_irq);
+ } else {
+ set_irq_handler(irq, handle_edge_irq);
+ }
spin_lock_irqsave(&sm->lock, flags);
pattern = sm_readl(sm, EIM_MODE);
nr_irqs = fls(pattern);
+ /* Trigger on falling edge unless overridden by driver */
+ sm_writel(sm, EIM_MODE, 0UL);
+ sm_writel(sm, EIM_EDGE, 0UL);
+
sm->eim_chip = &eim_chip;
for (i = 0; i < nr_irqs; i++) {
- set_irq_chip(sm->eim_first_irq + i, &eim_chip);
+ set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
+ handle_edge_irq);
set_irq_chip_data(sm->eim_first_irq + i, sm);
}
panic("Interrupt controller initialization failed!\n");
}
+unsigned long intc_get_pending(int group)
+{
+ return intc_readl(&intc0, INTREQ0 + 4 * group);
+}
void __iomem *regs;
const struct platform_device *pdev;
struct clk *clk;
- u32 alloc_mask;
+ u32 pinmux_mask;
char name[32];
};
static struct pio_device pio_dev[MAX_NR_PIO_DEVICES];
-void portmux_set_func(unsigned int portmux_id, unsigned int pin_id,
- unsigned int function_id)
+static struct pio_device *gpio_to_pio(unsigned int gpio)
{
struct pio_device *pio;
- u32 mask = 1 << pin_id;
+ unsigned int index;
- BUG_ON(portmux_id >= MAX_NR_PIO_DEVICES);
+ index = gpio >> 5;
+ if (index >= MAX_NR_PIO_DEVICES)
+ return NULL;
+ pio = &pio_dev[index];
+ if (!pio->regs)
+ return NULL;
- pio = &pio_dev[portmux_id];
+ return pio;
+}
+
+/* Pin multiplexing API */
+
+void __init at32_select_periph(unsigned int pin, unsigned int periph,
+ unsigned long flags)
+{
+ struct pio_device *pio;
+ unsigned int pin_index = pin & 0x1f;
+ u32 mask = 1 << pin_index;
+
+ pio = gpio_to_pio(pin);
+ if (unlikely(!pio)) {
+ printk("pio: invalid pin %u\n", pin);
+ goto fail;
+ }
- if (function_id)
+ if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
+ printk("%s: pin %u is busy\n", pio->name, pin_index);
+ goto fail;
+ }
+
+ pio_writel(pio, PUER, mask);
+ if (periph)
pio_writel(pio, BSR, mask);
else
pio_writel(pio, ASR, mask);
+
pio_writel(pio, PDR, mask);
+ if (!(flags & AT32_GPIOF_PULLUP))
+ pio_writel(pio, PUDR, mask);
+
+ return;
+
+fail:
+ dump_stack();
+}
+
+void __init at32_select_gpio(unsigned int pin, unsigned long flags)
+{
+ struct pio_device *pio;
+ unsigned int pin_index = pin & 0x1f;
+ u32 mask = 1 << pin_index;
+
+ pio = gpio_to_pio(pin);
+ if (unlikely(!pio)) {
+ printk("pio: invalid pin %u\n", pin);
+ goto fail;
+ }
+
+ if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
+ printk("%s: pin %u is busy\n", pio->name, pin_index);
+ goto fail;
+ }
+
+ pio_writel(pio, PUER, mask);
+ if (flags & AT32_GPIOF_HIGH)
+ pio_writel(pio, SODR, mask);
+ else
+ pio_writel(pio, CODR, mask);
+ if (flags & AT32_GPIOF_OUTPUT)
+ pio_writel(pio, OER, mask);
+ else
+ pio_writel(pio, ODR, mask);
+
+ pio_writel(pio, PER, mask);
+ if (!(flags & AT32_GPIOF_PULLUP))
+ pio_writel(pio, PUDR, mask);
+
+ return;
+
+fail:
+ dump_stack();
}
static int __init pio_probe(struct platform_device *pdev)
+++ /dev/null
-/*
- * System Manager driver for AT32AP CPUs
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/random.h>
-#include <linux/spinlock.h>
-
-#include <asm/intc.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/sm.h>
-
-#include "sm.h"
-
-#define SM_EIM_IRQ_RESOURCE 1
-#define SM_PM_IRQ_RESOURCE 2
-#define SM_RTC_IRQ_RESOURCE 3
-
-#define to_eim(irqc) container_of(irqc, struct at32_sm, irqc)
-
-struct at32_sm system_manager;
-
-int __init at32_sm_init(void)
-{
- struct resource *regs;
- struct at32_sm *sm = &system_manager;
- int ret = -ENXIO;
-
- regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
- if (!regs)
- goto fail;
-
- spin_lock_init(&sm->lock);
- sm->pdev = &at32_sm_device;
-
- ret = -ENOMEM;
- sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
- if (!sm->regs)
- goto fail;
-
- return 0;
-
-fail:
- printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
- return ret;
-}
-
-/*
- * External Interrupt Module (EIM).
- *
- * EIM gets level- or edge-triggered interrupts of either polarity
- * from the outside and converts it to active-high level-triggered
- * interrupts that the internal interrupt controller can handle. EIM
- * also provides masking/unmasking of interrupts, as well as
- * acknowledging of edge-triggered interrupts.
- */
-
-static irqreturn_t spurious_eim_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
-{
- printk(KERN_WARNING "Spurious EIM interrupt %d\n", irq);
- disable_irq(irq);
- return IRQ_NONE;
-}
-
-static struct irqaction eim_spurious_action = {
- .handler = spurious_eim_interrupt,
-};
-
-static irqreturn_t eim_handle_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct irq_controller * irqc = dev_id;
- struct at32_sm *sm = to_eim(irqc);
- unsigned long pending;
-
- /*
- * No need to disable interrupts globally. The interrupt
- * level relevant to this group must be masked all the time,
- * so we know that this particular EIM instance will not be
- * re-entered.
- */
- spin_lock(&sm->lock);
-
- pending = intc_get_pending(sm->irqc.irq_group);
- if (unlikely(!pending)) {
- printk(KERN_ERR "EIM (group %u): No interrupts pending!\n",
- sm->irqc.irq_group);
- goto unlock;
- }
-
- do {
- struct irqaction *action;
- unsigned int i;
-
- i = fls(pending) - 1;
- pending &= ~(1 << i);
- action = sm->action[i];
-
- /* Acknowledge the interrupt */
- sm_writel(sm, EIM_ICR, 1 << i);
-
- spin_unlock(&sm->lock);
-
- if (action->flags & SA_INTERRUPT)
- local_irq_disable();
- action->handler(sm->irqc.first_irq + i, action->dev_id, regs);
- local_irq_enable();
- spin_lock(&sm->lock);
- if (action->flags & SA_SAMPLE_RANDOM)
- add_interrupt_randomness(sm->irqc.first_irq + i);
- } while (pending);
-
-unlock:
- spin_unlock(&sm->lock);
- return IRQ_HANDLED;
-}
-
-static void eim_mask(struct irq_controller *irqc, unsigned int irq)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned int i;
-
- i = irq - sm->irqc.first_irq;
- sm_writel(sm, EIM_IDR, 1 << i);
-}
-
-static void eim_unmask(struct irq_controller *irqc, unsigned int irq)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned int i;
-
- i = irq - sm->irqc.first_irq;
- sm_writel(sm, EIM_IER, 1 << i);
-}
-
-static int eim_setup(struct irq_controller *irqc, unsigned int irq,
- struct irqaction *action)
-{
- struct at32_sm *sm = to_eim(irqc);
- sm->action[irq - sm->irqc.first_irq] = action;
- /* Acknowledge earlier interrupts */
- sm_writel(sm, EIM_ICR, (1<<(irq - sm->irqc.first_irq)));
- eim_unmask(irqc, irq);
- return 0;
-}
-
-static void eim_free(struct irq_controller *irqc, unsigned int irq,
- void *dev)
-{
- struct at32_sm *sm = to_eim(irqc);
- eim_mask(irqc, irq);
- sm->action[irq - sm->irqc.first_irq] = &eim_spurious_action;
-}
-
-static int eim_set_type(struct irq_controller *irqc, unsigned int irq,
- unsigned int type)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned long flags;
- u32 value, pattern;
-
- spin_lock_irqsave(&sm->lock, flags);
-
- pattern = 1 << (irq - sm->irqc.first_irq);
-
- value = sm_readl(sm, EIM_MODE);
- if (type & IRQ_TYPE_LEVEL)
- value |= pattern;
- else
- value &= ~pattern;
- sm_writel(sm, EIM_MODE, value);
- value = sm_readl(sm, EIM_EDGE);
- if (type & IRQ_EDGE_RISING)
- value |= pattern;
- else
- value &= ~pattern;
- sm_writel(sm, EIM_EDGE, value);
- value = sm_readl(sm, EIM_LEVEL);
- if (type & IRQ_LEVEL_HIGH)
- value |= pattern;
- else
- value &= ~pattern;
- sm_writel(sm, EIM_LEVEL, value);
-
- spin_unlock_irqrestore(&sm->lock, flags);
-
- return 0;
-}
-
-static unsigned int eim_get_type(struct irq_controller *irqc,
- unsigned int irq)
-{
- struct at32_sm *sm = to_eim(irqc);
- unsigned long flags;
- unsigned int type = 0;
- u32 mode, edge, level, pattern;
-
- pattern = 1 << (irq - sm->irqc.first_irq);
-
- spin_lock_irqsave(&sm->lock, flags);
- mode = sm_readl(sm, EIM_MODE);
- edge = sm_readl(sm, EIM_EDGE);
- level = sm_readl(sm, EIM_LEVEL);
- spin_unlock_irqrestore(&sm->lock, flags);
-
- if (mode & pattern)
- type |= IRQ_TYPE_LEVEL;
- if (edge & pattern)
- type |= IRQ_EDGE_RISING;
- if (level & pattern)
- type |= IRQ_LEVEL_HIGH;
-
- return type;
-}
-
-static struct irq_controller_class eim_irq_class = {
- .typename = "EIM",
- .handle = eim_handle_irq,
- .setup = eim_setup,
- .free = eim_free,
- .mask = eim_mask,
- .unmask = eim_unmask,
- .set_type = eim_set_type,
- .get_type = eim_get_type,
-};
-
-static int __init eim_init(void)
-{
- struct at32_sm *sm = &system_manager;
- unsigned int i;
- u32 pattern;
- int ret;
-
- /*
- * The EIM is really the same module as SM, so register
- * mapping, etc. has been taken care of already.
- */
-
- /*
- * Find out how many interrupt lines that are actually
- * implemented in hardware.
- */
- sm_writel(sm, EIM_IDR, ~0UL);
- sm_writel(sm, EIM_MODE, ~0UL);
- pattern = sm_readl(sm, EIM_MODE);
- sm->irqc.nr_irqs = fls(pattern);
-
- ret = -ENOMEM;
- sm->action = kmalloc(sizeof(*sm->action) * sm->irqc.nr_irqs,
- GFP_KERNEL);
- if (!sm->action)
- goto out;
-
- for (i = 0; i < sm->irqc.nr_irqs; i++)
- sm->action[i] = &eim_spurious_action;
-
- spin_lock_init(&sm->lock);
- sm->irqc.irq_group = sm->pdev->resource[SM_EIM_IRQ_RESOURCE].start;
- sm->irqc.class = &eim_irq_class;
-
- ret = intc_register_controller(&sm->irqc);
- if (ret < 0)
- goto out_free_actions;
-
- printk("EIM: External Interrupt Module at 0x%p, IRQ group %u\n",
- sm->regs, sm->irqc.irq_group);
- printk("EIM: Handling %u external IRQs, starting with IRQ%u\n",
- sm->irqc.nr_irqs, sm->irqc.first_irq);
-
- return 0;
-
-out_free_actions:
- kfree(sm->action);
-out:
- return ret;
-}
-arch_initcall(eim_init);
config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_FIND_NEXT_BIT
bool
default y
#else
struct mtd_info *mtd_ram;
- mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info),
+ mtd_ram = kmalloc(sizeof(struct mtd_info),
GFP_KERNEL);
if (!mtd_ram) {
panic("axisflashmap couldn't allocate memory for "
if (p > GPIO_MINOR_LAST)
return -EINVAL;
- priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private),
+ priv = kmalloc(sizeof(struct gpio_private),
GFP_KERNEL);
if (!priv)
#else
struct mtd_info *mtd_ram;
- mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info),
+ mtd_ram = kmalloc(sizeof(struct mtd_info),
GFP_KERNEL);
if (!mtd_ram) {
panic("axisflashmap couldn't allocate memory for "
if (p > GPIO_MINOR_LAST)
return -EINVAL;
- priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private),
+ priv = kmalloc(sizeof(struct gpio_private),
GFP_KERNEL);
if (!priv)
static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
{
- int dev = iminor(file->f_dentry->d_inode);
+ int dev = iminor(file->f_path.dentry->d_inode);
unsigned int mask = 0;
sync_port* port;
DEBUGPOLL( static unsigned int prev_mask = 0; );
unsigned int cmd, unsigned long arg)
{
int return_val = 0;
- int dev = iminor(file->f_dentry->d_inode);
+ int dev = iminor(file->f_path.dentry->d_inode);
sync_port* port;
reg_sser_rw_tr_cfg tr_cfg;
reg_sser_rw_rec_cfg rec_cfg;
static ssize_t sync_serial_write(struct file * file, const char * buf,
size_t count, loff_t *ppos)
{
- int dev = iminor(file->f_dentry->d_inode);
+ int dev = iminor(file->f_path.dentry->d_inode);
DECLARE_WAITQUEUE(wait, current);
sync_port *port;
unsigned long c, c1;
static ssize_t sync_serial_read(struct file * file, char * buf,
size_t count, loff_t *ppos)
{
- int dev = iminor(file->f_dentry->d_inode);
+ int dev = iminor(file->f_path.dentry->d_inode);
int avail;
sync_port *port;
unsigned char* start;
int __init
cris_init_signal(void)
{
- u16* data = (u16*)kmalloc(PAGE_SIZE, GFP_KERNEL);
+ u16* data = kmalloc(PAGE_SIZE, GFP_KERNEL);
/* This is movu.w __NR_sigreturn, r9; break 13; */
data[0] = 0x9c5f;
__init init_cris_profile(void)
{
struct proc_dir_entry *entry;
- sample_buffer = (char*)kmalloc(SAMPLE_BUFFER_SIZE, GFP_KERNEL);
+ sample_buffer = kmalloc(SAMPLE_BUFFER_SIZE, GFP_KERNEL);
sample_buffer_pos = sample_buffer;
entry = create_proc_entry("system_profile", S_IWUSR | S_IRUGO, NULL);
if (entry) {
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default y
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default y
+
mainmenu "Fujitsu FR-V Kernel Configuration"
source "init/Kconfig"
static int cmode_sysctl(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
if (oldval && oldlenp) {
size_t oldlen;
static int p0_sysctl(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
if (oldval && oldlenp) {
size_t oldlen;
static int cm_sysctl(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
if (oldval && oldlenp) {
size_t oldlen;
#if 0
printk("[area] l=%lx (ENOMEM) f='%s'\n",
- len, filp ? filp->f_dentry->d_name.name : "");
+ len, filp ? filp->f_path.dentry->d_name.name : "");
#endif
return -ENOMEM;
success:
#if 0
printk("[area] l=%lx ad=%lx f='%s'\n",
- len, addr, filp ? filp->f_dentry->d_name.name : "");
+ len, addr, filp ? filp->f_path.dentry->d_name.name : "");
#endif
return addr;
} /* end arch_get_unmapped_area() */
bool
default n
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_FIND_NEXT_BIT
bool
default y
return -EBUSY;
if (use_kmalloc)
- irq_handle = (irq_handler_t *)kmalloc(sizeof(irq_handler_t), GFP_ATOMIC);
+ irq_handle = kmalloc(sizeof(irq_handler_t), GFP_ATOMIC);
else {
/* use bootmem allocater */
irq_handle = (irq_handler_t *)alloc_bootmem(sizeof(irq_handler_t));
}
if (use_kmalloc)
- irq_handle = (irq_handler_t *)kmalloc(sizeof(irq_handler_t), GFP_ATOMIC);
+ irq_handle = kmalloc(sizeof(irq_handler_t), GFP_ATOMIC);
else {
/* use bootmem allocater */
irq_handle = (irq_handler_t *)alloc_bootmem(sizeof(irq_handler_t));
bool
default y
+config GENERIC_BUG
+ bool
+ default y
+ depends on BUG
+
config GENERIC_HWEIGHT
bool
default y
config PARAVIRT
bool "Paravirtualization support (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ depends on !(X86_VISWS || X86_VOYAGER)
help
Paravirtualization is a way of running multiple instances of
Linux on the same machine, under a hypervisor. This option
depends on !M386
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_CALIBRATE_DELAY
bool
default y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-git7
-# Wed Dec 6 23:50:49 2006
+# Linux kernel version: 2.6.19-git14
+# Sat Dec 9 21:23:14 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-CONFIG_OSS_OBSOLETE_DRIVER=y
# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_ES1371 is not set
CONFIG_SOUND_ICH=y
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_OSS is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HID_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
CONFIG_NLS_UTF8=y
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Instrumentation Support
#
CONFIG_PROFILING=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
return 0;
}
early_param("acpi_sci", setup_acpi_sci);
+
+int __acpi_acquire_global_lock(unsigned int *lock)
+{
+ unsigned int old, new, val;
+ do {
+ old = *lock;
+ new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+ val = cmpxchg(lock, old, new);
+ } while (unlikely (val != old));
+ return (new < 3) ? -1 : 0;
+}
+
+int __acpi_release_global_lock(unsigned int *lock)
+{
+ unsigned int old, new, val;
+ do {
+ old = *lock;
+ new = old & ~0x3;
+ val = cmpxchg(lock, old, new);
+ } while (unlikely (val != old));
+ return old & 0x1;
+}
{
struct apm_user * as;
- as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
+ as = kmalloc(sizeof(*as), GFP_KERNEL);
if (as == NULL) {
printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
sizeof(*as));
help
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
+ This driver also supports Intel Enhanced Speedstep.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
config X86_SPEEDSTEP_CENTRINO_ACPI
- bool "Use ACPI tables to decode valid frequency/voltage pairs"
+ bool "Use ACPI tables to decode valid frequency/voltage (deprecated)"
depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
default y
help
+ This is deprecated and this functionality is now merged into
+ acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+ speedstep_centrino.
Use primarily the information provided in the BIOS ACPI tables
to determine valid CPU frequency and voltage pairings. It is
required for the driver to work on non-Banias CPUs.
obj-$(CONFIG_X86_LONGRUN) += longrun.o
obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
/*
- * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.3 $)
+ * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
+ * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
#include <linux/cpufreq.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
#include <linux/compiler.h>
-#include <linux/sched.h> /* current */
#include <linux/dmi.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
#include <linux/acpi.h>
#include <acpi/processor.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
MODULE_DESCRIPTION("ACPI Processor P-States Driver");
MODULE_LICENSE("GPL");
+enum {
+ UNDEFINED_CAPABLE = 0,
+ SYSTEM_INTEL_MSR_CAPABLE,
+ SYSTEM_IO_CAPABLE,
+};
+
+#define INTEL_MSR_RANGE (0xffff)
+#define CPUID_6_ECX_APERFMPERF_CAPABILITY (0x1)
-struct cpufreq_acpi_io {
- struct acpi_processor_performance *acpi_data;
- struct cpufreq_frequency_table *freq_table;
- unsigned int resume;
+struct acpi_cpufreq_data {
+ struct acpi_processor_performance *acpi_data;
+ struct cpufreq_frequency_table *freq_table;
+ unsigned int max_freq;
+ unsigned int resume;
+ unsigned int cpu_feature;
};
-static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS];
-static struct acpi_processor_performance *acpi_perf_data[NR_CPUS];
+static struct acpi_cpufreq_data *drv_data[NR_CPUS];
+static struct acpi_processor_performance *acpi_perf_data[NR_CPUS];
static struct cpufreq_driver acpi_cpufreq_driver;
static unsigned int acpi_pstate_strict;
-static int
-acpi_processor_write_port(
- u16 port,
- u8 bit_width,
- u32 value)
+static int check_est_cpu(unsigned int cpuid)
+{
+ struct cpuinfo_x86 *cpu = &cpu_data[cpuid];
+
+ if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+ !cpu_has(cpu, X86_FEATURE_EST))
+ return 0;
+
+ return 1;
+}
+
+static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
+{
+ struct acpi_processor_performance *perf;
+ int i;
+
+ perf = data->acpi_data;
+
+ for (i=0; i<perf->state_count; i++) {
+ if (value == perf->states[i].status)
+ return data->freq_table[i].frequency;
+ }
+ return 0;
+}
+
+static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
{
- if (bit_width <= 8) {
+ int i;
+ struct acpi_processor_performance *perf;
+
+ msr &= INTEL_MSR_RANGE;
+ perf = data->acpi_data;
+
+ for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ if (msr == perf->states[data->freq_table[i].index].status)
+ return data->freq_table[i].frequency;
+ }
+ return data->freq_table[0].frequency;
+}
+
+static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
+{
+ switch (data->cpu_feature) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ return extract_msr(val, data);
+ case SYSTEM_IO_CAPABLE:
+ return extract_io(val, data);
+ default:
+ return 0;
+ }
+}
+
+static void wrport(u16 port, u8 bit_width, u32 value)
+{
+ if (bit_width <= 8)
outb(value, port);
- } else if (bit_width <= 16) {
+ else if (bit_width <= 16)
outw(value, port);
- } else if (bit_width <= 32) {
+ else if (bit_width <= 32)
outl(value, port);
- } else {
- return -ENODEV;
- }
- return 0;
}
-static int
-acpi_processor_read_port(
- u16 port,
- u8 bit_width,
- u32 *ret)
+static void rdport(u16 port, u8 bit_width, u32 * ret)
{
*ret = 0;
- if (bit_width <= 8) {
+ if (bit_width <= 8)
*ret = inb(port);
- } else if (bit_width <= 16) {
+ else if (bit_width <= 16)
*ret = inw(port);
- } else if (bit_width <= 32) {
+ else if (bit_width <= 32)
*ret = inl(port);
- } else {
- return -ENODEV;
+}
+
+struct msr_addr {
+ u32 reg;
+};
+
+struct io_addr {
+ u16 port;
+ u8 bit_width;
+};
+
+typedef union {
+ struct msr_addr msr;
+ struct io_addr io;
+} drv_addr_union;
+
+struct drv_cmd {
+ unsigned int type;
+ cpumask_t mask;
+ drv_addr_union addr;
+ u32 val;
+};
+
+static void do_drv_read(struct drv_cmd *cmd)
+{
+ u32 h;
+
+ switch (cmd->type) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ rdmsr(cmd->addr.msr.reg, cmd->val, h);
+ break;
+ case SYSTEM_IO_CAPABLE:
+ rdport(cmd->addr.io.port, cmd->addr.io.bit_width, &cmd->val);
+ break;
+ default:
+ break;
}
- return 0;
}
-static int
-acpi_processor_set_performance (
- struct cpufreq_acpi_io *data,
- unsigned int cpu,
- int state)
+static void do_drv_write(struct drv_cmd *cmd)
{
- u16 port = 0;
- u8 bit_width = 0;
- int i = 0;
- int ret = 0;
- u32 value = 0;
- int retval;
- struct acpi_processor_performance *perf;
-
- dprintk("acpi_processor_set_performance\n");
-
- retval = 0;
- perf = data->acpi_data;
- if (state == perf->state) {
- if (unlikely(data->resume)) {
- dprintk("Called after resume, resetting to P%d\n", state);
- data->resume = 0;
- } else {
- dprintk("Already at target state (P%d)\n", state);
- return (retval);
- }
+ u32 h = 0;
+
+ switch (cmd->type) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ wrmsr(cmd->addr.msr.reg, cmd->val, h);
+ break;
+ case SYSTEM_IO_CAPABLE:
+ wrport(cmd->addr.io.port, cmd->addr.io.bit_width, cmd->val);
+ break;
+ default:
+ break;
}
+}
- dprintk("Transitioning from P%d to P%d\n", perf->state, state);
+static void drv_read(struct drv_cmd *cmd)
+{
+ cpumask_t saved_mask = current->cpus_allowed;
+ cmd->val = 0;
- /*
- * First we write the target state's 'control' value to the
- * control_register.
- */
+ set_cpus_allowed(current, cmd->mask);
+ do_drv_read(cmd);
+ set_cpus_allowed(current, saved_mask);
+}
+
+static void drv_write(struct drv_cmd *cmd)
+{
+ cpumask_t saved_mask = current->cpus_allowed;
+ unsigned int i;
+
+ for_each_cpu_mask(i, cmd->mask) {
+ set_cpus_allowed(current, cpumask_of_cpu(i));
+ do_drv_write(cmd);
+ }
+
+ set_cpus_allowed(current, saved_mask);
+ return;
+}
+
+static u32 get_cur_val(cpumask_t mask)
+{
+ struct acpi_processor_performance *perf;
+ struct drv_cmd cmd;
+
+ if (unlikely(cpus_empty(mask)))
+ return 0;
+
+ switch (drv_data[first_cpu(mask)]->cpu_feature) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
+ cmd.addr.msr.reg = MSR_IA32_PERF_STATUS;
+ break;
+ case SYSTEM_IO_CAPABLE:
+ cmd.type = SYSTEM_IO_CAPABLE;
+ perf = drv_data[first_cpu(mask)]->acpi_data;
+ cmd.addr.io.port = perf->control_register.address;
+ cmd.addr.io.bit_width = perf->control_register.bit_width;
+ break;
+ default:
+ return 0;
+ }
+
+ cmd.mask = mask;
- port = perf->control_register.address;
- bit_width = perf->control_register.bit_width;
- value = (u32) perf->states[state].control;
+ drv_read(&cmd);
- dprintk("Writing 0x%08x to port 0x%04x\n", value, port);
+ dprintk("get_cur_val = %u\n", cmd.val);
- ret = acpi_processor_write_port(port, bit_width, value);
- if (ret) {
- dprintk("Invalid port width 0x%04x\n", bit_width);
- return (ret);
+ return cmd.val;
+}
+
+/*
+ * Return the measured active (C0) frequency on this CPU since last call
+ * to this function.
+ * Input: cpu number
+ * Return: Average CPU frequency in terms of max frequency (zero on error)
+ *
+ * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance
+ * over a period of time, while CPU is in C0 state.
+ * IA32_MPERF counts at the rate of max advertised frequency
+ * IA32_APERF counts at the rate of actual CPU frequency
+ * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
+ * no meaning should be associated with absolute values of these MSRs.
+ */
+static unsigned int get_measured_perf(unsigned int cpu)
+{
+ union {
+ struct {
+ u32 lo;
+ u32 hi;
+ } split;
+ u64 whole;
+ } aperf_cur, mperf_cur;
+
+ cpumask_t saved_mask;
+ unsigned int perf_percent;
+ unsigned int retval;
+
+ saved_mask = current->cpus_allowed;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ if (get_cpu() != cpu) {
+ /* We were not able to run on requested processor */
+ put_cpu();
+ return 0;
}
+ rdmsr(MSR_IA32_APERF, aperf_cur.split.lo, aperf_cur.split.hi);
+ rdmsr(MSR_IA32_MPERF, mperf_cur.split.lo, mperf_cur.split.hi);
+
+ wrmsr(MSR_IA32_APERF, 0,0);
+ wrmsr(MSR_IA32_MPERF, 0,0);
+
+#ifdef __i386__
/*
- * Assume the write went through when acpi_pstate_strict is not used.
- * As read status_register is an expensive operation and there
- * are no specific error cases where an IO port write will fail.
+ * We dont want to do 64 bit divide with 32 bit kernel
+ * Get an approximate value. Return failure in case we cannot get
+ * an approximate value.
*/
- if (acpi_pstate_strict) {
- /* Then we read the 'status_register' and compare the value
- * with the target state's 'status' to make sure the
- * transition was successful.
- * Note that we'll poll for up to 1ms (100 cycles of 10us)
- * before giving up.
- */
-
- port = perf->status_register.address;
- bit_width = perf->status_register.bit_width;
-
- dprintk("Looking for 0x%08x from port 0x%04x\n",
- (u32) perf->states[state].status, port);
-
- for (i = 0; i < 100; i++) {
- ret = acpi_processor_read_port(port, bit_width, &value);
- if (ret) {
- dprintk("Invalid port width 0x%04x\n", bit_width);
- return (ret);
- }
- if (value == (u32) perf->states[state].status)
- break;
- udelay(10);
- }
- } else {
- value = (u32) perf->states[state].status;
+ if (unlikely(aperf_cur.split.hi || mperf_cur.split.hi)) {
+ int shift_count;
+ u32 h;
+
+ h = max_t(u32, aperf_cur.split.hi, mperf_cur.split.hi);
+ shift_count = fls(h);
+
+ aperf_cur.whole >>= shift_count;
+ mperf_cur.whole >>= shift_count;
+ }
+
+ if (((unsigned long)(-1) / 100) < aperf_cur.split.lo) {
+ int shift_count = 7;
+ aperf_cur.split.lo >>= shift_count;
+ mperf_cur.split.lo >>= shift_count;
+ }
+
+ if (aperf_cur.split.lo && mperf_cur.split.lo)
+ perf_percent = (aperf_cur.split.lo * 100) / mperf_cur.split.lo;
+ else
+ perf_percent = 0;
+
+#else
+ if (unlikely(((unsigned long)(-1) / 100) < aperf_cur.whole)) {
+ int shift_count = 7;
+ aperf_cur.whole >>= shift_count;
+ mperf_cur.whole >>= shift_count;
}
- if (unlikely(value != (u32) perf->states[state].status)) {
- printk(KERN_WARNING "acpi-cpufreq: Transition failed\n");
- retval = -ENODEV;
- return (retval);
+ if (aperf_cur.whole && mperf_cur.whole)
+ perf_percent = (aperf_cur.whole * 100) / mperf_cur.whole;
+ else
+ perf_percent = 0;
+
+#endif
+
+ retval = drv_data[cpu]->max_freq * perf_percent / 100;
+
+ put_cpu();
+ set_cpus_allowed(current, saved_mask);
+
+ dprintk("cpu %d: performance percent %d\n", cpu, perf_percent);
+ return retval;
+}
+
+static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
+{
+ struct acpi_cpufreq_data *data = drv_data[cpu];
+ unsigned int freq;
+
+ dprintk("get_cur_freq_on_cpu (%d)\n", cpu);
+
+ if (unlikely(data == NULL ||
+ data->acpi_data == NULL || data->freq_table == NULL)) {
+ return 0;
}
- dprintk("Transition successful after %d microseconds\n", i * 10);
+ freq = extract_freq(get_cur_val(cpumask_of_cpu(cpu)), data);
+ dprintk("cur freq = %u\n", freq);
- perf->state = state;
- return (retval);
+ return freq;
}
+static unsigned int check_freqs(cpumask_t mask, unsigned int freq,
+ struct acpi_cpufreq_data *data)
+{
+ unsigned int cur_freq;
+ unsigned int i;
+
+ for (i=0; i<100; i++) {
+ cur_freq = extract_freq(get_cur_val(mask), data);
+ if (cur_freq == freq)
+ return 1;
+ udelay(10);
+ }
+ return 0;
+}
-static int
-acpi_cpufreq_target (
- struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
+static int acpi_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
{
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
struct acpi_processor_performance *perf;
struct cpufreq_freqs freqs;
cpumask_t online_policy_cpus;
- cpumask_t saved_mask;
- cpumask_t set_mask;
- cpumask_t covered_cpus;
- unsigned int cur_state = 0;
+ struct drv_cmd cmd;
+ unsigned int msr;
unsigned int next_state = 0;
- unsigned int result = 0;
- unsigned int j;
- unsigned int tmp;
+ unsigned int next_perf_state = 0;
+ unsigned int i;
+ int result = 0;
- dprintk("acpi_cpufreq_setpolicy\n");
+ dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
- result = cpufreq_frequency_table_target(policy,
- data->freq_table,
- target_freq,
- relation,
- &next_state);
- if (unlikely(result))
- return (result);
+ if (unlikely(data == NULL ||
+ data->acpi_data == NULL || data->freq_table == NULL)) {
+ return -ENODEV;
+ }
perf = data->acpi_data;
- cur_state = perf->state;
- freqs.old = data->freq_table[cur_state].frequency;
- freqs.new = data->freq_table[next_state].frequency;
+ result = cpufreq_frequency_table_target(policy,
+ data->freq_table,
+ target_freq,
+ relation, &next_state);
+ if (unlikely(result))
+ return -ENODEV;
#ifdef CONFIG_HOTPLUG_CPU
/* cpufreq holds the hotplug lock, so we are safe from here on */
online_policy_cpus = policy->cpus;
#endif
- for_each_cpu_mask(j, online_policy_cpus) {
- freqs.cpu = j;
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ next_perf_state = data->freq_table[next_state].index;
+ if (perf->state == next_perf_state) {
+ if (unlikely(data->resume)) {
+ dprintk("Called after resume, resetting to P%d\n",
+ next_perf_state);
+ data->resume = 0;
+ } else {
+ dprintk("Already at target state (P%d)\n",
+ next_perf_state);
+ return 0;
+ }
}
- /*
- * We need to call driver->target() on all or any CPU in
- * policy->cpus, depending on policy->shared_type.
- */
- saved_mask = current->cpus_allowed;
- cpus_clear(covered_cpus);
- for_each_cpu_mask(j, online_policy_cpus) {
- /*
- * Support for SMP systems.
- * Make sure we are running on CPU that wants to change freq
- */
- cpus_clear(set_mask);
- if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
- cpus_or(set_mask, set_mask, online_policy_cpus);
- else
- cpu_set(j, set_mask);
-
- set_cpus_allowed(current, set_mask);
- if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
- dprintk("couldn't limit to CPUs in this domain\n");
- result = -EAGAIN;
- break;
- }
+ switch (data->cpu_feature) {
+ case SYSTEM_INTEL_MSR_CAPABLE:
+ cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
+ cmd.addr.msr.reg = MSR_IA32_PERF_CTL;
+ msr =
+ (u32) perf->states[next_perf_state].
+ control & INTEL_MSR_RANGE;
+ cmd.val = (cmd.val & ~INTEL_MSR_RANGE) | msr;
+ break;
+ case SYSTEM_IO_CAPABLE:
+ cmd.type = SYSTEM_IO_CAPABLE;
+ cmd.addr.io.port = perf->control_register.address;
+ cmd.addr.io.bit_width = perf->control_register.bit_width;
+ cmd.val = (u32) perf->states[next_perf_state].control;
+ break;
+ default:
+ return -ENODEV;
+ }
- result = acpi_processor_set_performance (data, j, next_state);
- if (result) {
- result = -EAGAIN;
- break;
- }
+ cpus_clear(cmd.mask);
- if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
- break;
-
- cpu_set(j, covered_cpus);
- }
+ if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
+ cmd.mask = online_policy_cpus;
+ else
+ cpu_set(policy->cpu, cmd.mask);
- for_each_cpu_mask(j, online_policy_cpus) {
- freqs.cpu = j;
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ freqs.old = data->freq_table[perf->state].frequency;
+ freqs.new = data->freq_table[next_perf_state].frequency;
+ for_each_cpu_mask(i, cmd.mask) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
- if (unlikely(result)) {
- /*
- * We have failed halfway through the frequency change.
- * We have sent callbacks to online_policy_cpus and
- * acpi_processor_set_performance() has been called on
- * coverd_cpus. Best effort undo..
- */
-
- if (!cpus_empty(covered_cpus)) {
- for_each_cpu_mask(j, covered_cpus) {
- policy->cpu = j;
- acpi_processor_set_performance (data,
- j,
- cur_state);
- }
- }
+ drv_write(&cmd);
- tmp = freqs.new;
- freqs.new = freqs.old;
- freqs.old = tmp;
- for_each_cpu_mask(j, online_policy_cpus) {
- freqs.cpu = j;
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ if (acpi_pstate_strict) {
+ if (!check_freqs(cmd.mask, freqs.new, data)) {
+ dprintk("acpi_cpufreq_target failed (%d)\n",
+ policy->cpu);
+ return -EAGAIN;
}
}
- set_cpus_allowed(current, saved_mask);
- return (result);
-}
+ for_each_cpu_mask(i, cmd.mask) {
+ freqs.cpu = i;
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ }
+ perf->state = next_perf_state;
+ return result;
+}
-static int
-acpi_cpufreq_verify (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_verify(struct cpufreq_policy *policy)
{
- unsigned int result = 0;
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
dprintk("acpi_cpufreq_verify\n");
- result = cpufreq_frequency_table_verify(policy,
- data->freq_table);
-
- return (result);
+ return cpufreq_frequency_table_verify(policy, data->freq_table);
}
-
static unsigned long
-acpi_cpufreq_guess_freq (
- struct cpufreq_acpi_io *data,
- unsigned int cpu)
+acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
{
- struct acpi_processor_performance *perf = data->acpi_data;
+ struct acpi_processor_performance *perf = data->acpi_data;
if (cpu_khz) {
/* search the closest match to cpu_khz */
unsigned long freq;
unsigned long freqn = perf->states[0].core_frequency * 1000;
- for (i = 0; i < (perf->state_count - 1); i++) {
+ for (i=0; i<(perf->state_count-1); i++) {
freq = freqn;
freqn = perf->states[i+1].core_frequency * 1000;
if ((2 * cpu_khz) > (freqn + freq)) {
perf->state = i;
- return (freq);
+ return freq;
}
}
- perf->state = perf->state_count - 1;
- return (freqn);
+ perf->state = perf->state_count-1;
+ return freqn;
} else {
/* assume CPU is at P0... */
perf->state = 0;
}
}
-
/*
* acpi_cpufreq_early_init - initialize ACPI P-States library
*
* do _PDC and _PSD and find out the processor dependency for the
* actual init that will happen later...
*/
-static int acpi_cpufreq_early_init_acpi(void)
+static int acpi_cpufreq_early_init(void)
{
- struct acpi_processor_performance *data;
- unsigned int i, j;
+ struct acpi_processor_performance *data;
+ cpumask_t covered;
+ unsigned int i, j;
dprintk("acpi_cpufreq_early_init\n");
for_each_possible_cpu(i) {
- data = kzalloc(sizeof(struct acpi_processor_performance),
- GFP_KERNEL);
+ data = kzalloc(sizeof(struct acpi_processor_performance),
+ GFP_KERNEL);
if (!data) {
- for_each_possible_cpu(j) {
+ for_each_cpu_mask(j, covered) {
kfree(acpi_perf_data[j]);
acpi_perf_data[j] = NULL;
}
- return (-ENOMEM);
+ return -ENOMEM;
}
acpi_perf_data[i] = data;
+ cpu_set(i, covered);
}
/* Do initialization in ACPI core */
- return acpi_processor_preregister_performance(acpi_perf_data);
+ acpi_processor_preregister_performance(acpi_perf_data);
+ return 0;
}
+#ifdef CONFIG_SMP
/*
* Some BIOSes do SW_ANY coordination internally, either set it up in hw
* or do it in BIOS firmware and won't inform about it to OS. If not
},
{ }
};
+#endif
-static int
-acpi_cpufreq_cpu_init (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- unsigned int i;
- unsigned int cpu = policy->cpu;
- struct cpufreq_acpi_io *data;
- unsigned int result = 0;
+ unsigned int i;
+ unsigned int valid_states = 0;
+ unsigned int cpu = policy->cpu;
+ struct acpi_cpufreq_data *data;
+ unsigned int result = 0;
struct cpuinfo_x86 *c = &cpu_data[policy->cpu];
- struct acpi_processor_performance *perf;
+ struct acpi_processor_performance *perf;
dprintk("acpi_cpufreq_cpu_init\n");
if (!acpi_perf_data[cpu])
- return (-ENODEV);
+ return -ENODEV;
- data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
+ data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL);
if (!data)
- return (-ENOMEM);
+ return -ENOMEM;
data->acpi_data = acpi_perf_data[cpu];
- acpi_io_data[cpu] = data;
+ drv_data[cpu] = data;
- result = acpi_processor_register_performance(data->acpi_data, cpu);
+ if (cpu_has(c, X86_FEATURE_CONSTANT_TSC))
+ acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
+ result = acpi_processor_register_performance(data->acpi_data, cpu);
if (result)
goto err_free;
perf = data->acpi_data;
policy->shared_type = perf->shared_type;
+
/*
- * Will let policy->cpus know about dependency only when software
+ * Will let policy->cpus know about dependency only when software
* coordination is required.
*/
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
}
#endif
- if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
- acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
- }
-
/* capability check */
if (perf->state_count <= 1) {
dprintk("No P-States\n");
goto err_unreg;
}
- if ((perf->control_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO) ||
- (perf->status_register.space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
- dprintk("Unsupported address space [%d, %d]\n",
- (u32) (perf->control_register.space_id),
- (u32) (perf->status_register.space_id));
+ if (perf->control_register.space_id != perf->status_register.space_id) {
+ result = -ENODEV;
+ goto err_unreg;
+ }
+
+ switch (perf->control_register.space_id) {
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ dprintk("SYSTEM IO addr space\n");
+ data->cpu_feature = SYSTEM_IO_CAPABLE;
+ break;
+ case ACPI_ADR_SPACE_FIXED_HARDWARE:
+ dprintk("HARDWARE addr space\n");
+ if (!check_est_cpu(cpu)) {
+ result = -ENODEV;
+ goto err_unreg;
+ }
+ data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE;
+ break;
+ default:
+ dprintk("Unknown addr space %d\n",
+ (u32) (perf->control_register.space_id));
result = -ENODEV;
goto err_unreg;
}
- /* alloc freq_table */
- data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * (perf->state_count + 1), GFP_KERNEL);
+ data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) *
+ (perf->state_count+1), GFP_KERNEL);
if (!data->freq_table) {
result = -ENOMEM;
goto err_unreg;
/* detect transition latency */
policy->cpuinfo.transition_latency = 0;
for (i=0; i<perf->state_count; i++) {
- if ((perf->states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency)
- policy->cpuinfo.transition_latency = perf->states[i].transition_latency * 1000;
+ if ((perf->states[i].transition_latency * 1000) >
+ policy->cpuinfo.transition_latency)
+ policy->cpuinfo.transition_latency =
+ perf->states[i].transition_latency * 1000;
}
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
- /* The current speed is unknown and not detectable by ACPI... */
- policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
-
+ data->max_freq = perf->states[0].core_frequency * 1000;
/* table init */
- for (i=0; i<=perf->state_count; i++)
- {
- data->freq_table[i].index = i;
- if (i<perf->state_count)
- data->freq_table[i].frequency = perf->states[i].core_frequency * 1000;
- else
- data->freq_table[i].frequency = CPUFREQ_TABLE_END;
+ for (i=0; i<perf->state_count; i++) {
+ if (i>0 && perf->states[i].core_frequency ==
+ perf->states[i-1].core_frequency)
+ continue;
+
+ data->freq_table[valid_states].index = i;
+ data->freq_table[valid_states].frequency =
+ perf->states[i].core_frequency * 1000;
+ valid_states++;
}
+ data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
- if (result) {
+ if (result)
goto err_freqfree;
+
+ switch (data->cpu_feature) {
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ /* Current speed is unknown and not detectable by IO port */
+ policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
+ break;
+ case ACPI_ADR_SPACE_FIXED_HARDWARE:
+ acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
+ get_cur_freq_on_cpu(cpu);
+ break;
+ default:
+ break;
}
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management activated.\n",
- cpu);
+ /* Check for APERF/MPERF support in hardware */
+ if (c->x86_vendor == X86_VENDOR_INTEL && c->cpuid_level >= 6) {
+ unsigned int ecx;
+ ecx = cpuid_ecx(6);
+ if (ecx & CPUID_6_ECX_APERFMPERF_CAPABILITY)
+ acpi_cpufreq_driver.getavg = get_measured_perf;
+ }
+
+ dprintk("CPU%u - ACPI performance management activated.\n", cpu);
for (i = 0; i < perf->state_count; i++)
dprintk(" %cP%d: %d MHz, %d mW, %d uS\n",
- (i == perf->state?'*':' '), i,
+ (i == perf->state ? '*' : ' '), i,
(u32) perf->states[i].core_frequency,
(u32) perf->states[i].power,
(u32) perf->states[i].transition_latency);
cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
-
+
/*
* the first call to ->target() should result in us actually
* writing something to the appropriate registers.
*/
data->resume = 1;
-
- return (result);
- err_freqfree:
+ return result;
+
+err_freqfree:
kfree(data->freq_table);
- err_unreg:
+err_unreg:
acpi_processor_unregister_performance(perf, cpu);
- err_free:
+err_free:
kfree(data);
- acpi_io_data[cpu] = NULL;
+ drv_data[cpu] = NULL;
- return (result);
+ return result;
}
-
-static int
-acpi_cpufreq_cpu_exit (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
-
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
dprintk("acpi_cpufreq_cpu_exit\n");
if (data) {
cpufreq_frequency_table_put_attr(policy->cpu);
- acpi_io_data[policy->cpu] = NULL;
- acpi_processor_unregister_performance(data->acpi_data, policy->cpu);
+ drv_data[policy->cpu] = NULL;
+ acpi_processor_unregister_performance(data->acpi_data,
+ policy->cpu);
kfree(data);
}
- return (0);
+ return 0;
}
-static int
-acpi_cpufreq_resume (
- struct cpufreq_policy *policy)
+static int acpi_cpufreq_resume(struct cpufreq_policy *policy)
{
- struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
-
+ struct acpi_cpufreq_data *data = drv_data[policy->cpu];
dprintk("acpi_cpufreq_resume\n");
data->resume = 1;
- return (0);
+ return 0;
}
-
-static struct freq_attr* acpi_cpufreq_attr[] = {
+static struct freq_attr *acpi_cpufreq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver acpi_cpufreq_driver = {
- .verify = acpi_cpufreq_verify,
- .target = acpi_cpufreq_target,
- .init = acpi_cpufreq_cpu_init,
- .exit = acpi_cpufreq_cpu_exit,
- .resume = acpi_cpufreq_resume,
- .name = "acpi-cpufreq",
- .owner = THIS_MODULE,
- .attr = acpi_cpufreq_attr,
+ .verify = acpi_cpufreq_verify,
+ .target = acpi_cpufreq_target,
+ .init = acpi_cpufreq_cpu_init,
+ .exit = acpi_cpufreq_cpu_exit,
+ .resume = acpi_cpufreq_resume,
+ .name = "acpi-cpufreq",
+ .owner = THIS_MODULE,
+ .attr = acpi_cpufreq_attr,
};
-
-static int __init
-acpi_cpufreq_init (void)
+static int __init acpi_cpufreq_init(void)
{
dprintk("acpi_cpufreq_init\n");
- acpi_cpufreq_early_init_acpi();
+ acpi_cpufreq_early_init();
return cpufreq_register_driver(&acpi_cpufreq_driver);
}
-
-static void __exit
-acpi_cpufreq_exit (void)
+static void __exit acpi_cpufreq_exit(void)
{
- unsigned int i;
+ unsigned int i;
dprintk("acpi_cpufreq_exit\n");
cpufreq_unregister_driver(&acpi_cpufreq_driver);
}
module_param(acpi_pstate_strict, uint, 0644);
-MODULE_PARM_DESC(acpi_pstate_strict, "value 0 or non-zero. non-zero -> strict ACPI checks are performed during frequency changes.");
+MODULE_PARM_DESC(acpi_pstate_strict,
+ "value 0 or non-zero. non-zero -> strict ACPI checks are "
+ "performed during frequency changes.");
late_initcall(acpi_cpufreq_init);
module_exit(acpi_cpufreq_exit);
int ret;
struct gxfreq_params *params;
struct pci_dev *gx_pci;
- u32 class_rev;
/* Test if we have the right hardware */
if ((gx_pci = gx_detect_chipset()) == NULL)
pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
- pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
- params->pci_rev = class_rev && 0xff;
+ pci_read_config_byte(params->cs55x0, PCI_REVISION_ID, ¶ms->pci_rev);
if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
kfree(params);
maxmult=longhaul_get_cpu_mult();
/* Starting with the 1.2GHz parts, theres a 200MHz bus. */
- if ((cpu_khz/1000) > 1200)
+ if ((cpu_khz/maxmult) > 13400)
fsb = 200;
else
fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
if (dev == NULL) {
reg = 0x76;
dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL);
+ /* Find CN400 V-Link host bridge */
+ if (dev == NULL)
+ dev = pci_find_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
+
}
if (dev != NULL) {
/* Enable access to port 0x22 */
return 0;
err_acpi:
- printk(KERN_ERR PFX "No ACPI support. No VT8601 or VT8623 northbridge. Aborting.\n");
+ printk(KERN_ERR PFX "No ACPI support. Unsupported northbridge. Aborting.\n");
return -ENODEV;
}
static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
- if ((c->x86 == 0x06) && (c->x86_model == 0x09)) {
- /* Pentium M (Banias) */
- printk(KERN_WARNING PFX "Warning: Pentium M detected. "
- "The speedstep_centrino module offers voltage scaling"
- " in addition of frequency scaling. You should use "
- "that instead of p4-clockmod, if possible.\n");
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
- }
-
- if ((c->x86 == 0x06) && (c->x86_model == 0x0D)) {
- /* Pentium M (Dothan) */
- printk(KERN_WARNING PFX "Warning: Pentium M detected. "
- "The speedstep_centrino module offers voltage scaling"
- " in addition of frequency scaling. You should use "
- "that instead of p4-clockmod, if possible.\n");
- /* on P-4s, the TSC runs with constant frequency independent whether
- * throttling is active or not. */
- p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ if (c->x86 == 0x06) {
+ if (cpu_has(c, X86_FEATURE_EST))
+ printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
+ "The acpi-cpufreq module offers voltage scaling"
+ " in addition of frequency scaling. You should use "
+ "that instead of p4-clockmod, if possible.\n");
+ switch (c->x86_model) {
+ case 0x0E: /* Core */
+ case 0x0F: /* Core Duo */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
+ case 0x0D: /* Pentium M (Dothan) */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+ /* fall through */
+ case 0x09: /* Pentium M (Banias) */
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ }
}
if (c->x86 != 0xF) {
- printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <linux@brodo.de>\n");
+ printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n");
return 0;
}
static int __init sc520_freq_init(void)
{
struct cpuinfo_x86 *c = cpu_data;
+ int err;
/* Test if we have the right hardware */
if(c->x86_vendor != X86_VENDOR_AMD ||
return -ENOMEM;
}
- return cpufreq_register_driver(&sc520_freq_driver);
+ err = cpufreq_register_driver(&sc520_freq_driver);
+ if (err)
+ iounmap(cpuctl);
+
+ return err;
}
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+#define INTEL_MSR_RANGE (0xffff)
struct cpu_id
{
}
+#ifdef CONFIG_SMP
/*
* Some BIOSes do SW_ANY coordination internally, either set it up in hw
* or do it in BIOS firmware and won't inform about it to OS. If not
return 0;
}
-
static struct dmi_system_id sw_any_bug_dmi_table[] = {
{
.callback = sw_any_bug_found,
},
{ }
};
-
+#endif
/*
* centrino_cpu_init_acpi - register with ACPI P-States library
}
for (i=0; i<p->state_count; i++) {
- if (p->states[i].control != p->states[i].status) {
- dprintk("Different control (%llu) and status values (%llu)\n",
+ if ((p->states[i].control & INTEL_MSR_RANGE) !=
+ (p->states[i].status & INTEL_MSR_RANGE)) {
+ dprintk("Different MSR bits in control (%llu) and status (%llu)\n",
p->states[i].control, p->states[i].status);
result = -EINVAL;
goto err_unreg;
}
for (i=0; i<p->state_count; i++) {
- centrino_model[cpu]->op_points[i].index = p->states[i].control;
+ centrino_model[cpu]->op_points[i].index = p->states[i].control & INTEL_MSR_RANGE;
centrino_model[cpu]->op_points[i].frequency = p->states[i].core_frequency * 1000;
dprintk("adding state %i with frequency %u and control value %04x\n",
i, centrino_model[cpu]->op_points[i].frequency, centrino_model[cpu]->op_points[i].index);
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
+ printk("speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI"
+ "config is deprecated.\n "
+ "Use X86_ACPI_CPUFREQ (acpi-cpufreq instead.\n" );
return 0;
return (msr_tmp * 100 * 1000);
}
+static unsigned int pentium_core_get_frequency(void)
+{
+ u32 fsb = 0;
+ u32 msr_lo, msr_tmp;
+
+ rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
+ /* see table B-2 of 25366920.pdf */
+ switch (msr_lo & 0x07) {
+ case 5:
+ fsb = 100000;
+ break;
+ case 1:
+ fsb = 133333;
+ break;
+ case 3:
+ fsb = 166667;
+ break;
+ default:
+ printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
+ }
+
+ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
+ dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+
+ msr_tmp = (msr_lo >> 22) & 0x1f;
+ dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb));
+
+ return (msr_tmp * fsb);
+}
+
static unsigned int pentium4_get_frequency(void)
{
unsigned int speedstep_get_processor_frequency(unsigned int processor)
{
switch (processor) {
+ case SPEEDSTEP_PROCESSOR_PCORE:
+ return pentium_core_get_frequency();
case SPEEDSTEP_PROCESSOR_PM:
return pentiumM_get_frequency();
case SPEEDSTEP_PROCESSOR_P4D:
* the speedstep_get_processor_frequency() call. */
#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */
#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */
+#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */
/* speedstep states -- only two of them */
case SPEEDSTEP_PROCESSOR_PIII_C:
case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
break;
- case SPEEDSTEP_PROCESSOR_P4M:
- printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n");
- break;
default:
speedstep_processor = 0;
}
char __user *tmp = buf;
u32 data[4];
u32 reg = *ppos;
- int cpu = iminor(file->f_dentry->d_inode);
+ int cpu = iminor(file->f_path.dentry->d_inode);
if (count % 16)
return -EINVAL; /* Invalid chunk size */
static int cpuid_open(struct inode *inode, struct file *file)
{
- unsigned int cpu = iminor(file->f_dentry->d_inode);
+ unsigned int cpu = iminor(file->f_path.dentry->d_inode);
struct cpuinfo_x86 *c = &(cpu_data)[cpu];
if (cpu >= NR_CPUS || !cpu_online(cpu))
int create_irq(void)
{
/* Allocate an unused irq */
- int irq, new, vector;
+ int irq, new, vector = 0;
unsigned long flags;
irq = -ENOSPC;
/*
* Intel CPU Microcode Update Driver for Linux
*
- * Copyright (C) 2000-2004 Tigran Aivazian
+ * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
* 2006 Shaohua Li <shaohua.li@intel.com>
*
* This driver allows to upgrade microcode on Intel processors
#include <asm/processor.h>
MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver");
-MODULE_AUTHOR("Tigran Aivazian <tigran@veritas.com>");
+MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
MODULE_LICENSE("GPL");
#define MICROCODE_VERSION "1.14a"
register_hotcpu_notifier(&mc_cpu_notifier);
printk(KERN_INFO
- "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@veritas.com>\n");
+ "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n");
return 0;
}
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/bug.h>
#if 0
#define DEBUGP printk
apply_paravirt(pseg, pseg + para->sh_size);
}
- return 0;
+ return module_bug_finalize(hdr, sechdrs, me);
}
void module_arch_cleanup(struct module *mod)
{
alternatives_smp_module_del(mod);
+ module_bug_cleanup(mod);
}
u32 __user *tmp = (u32 __user *) buf;
u32 data[2];
u32 reg = *ppos;
- int cpu = iminor(file->f_dentry->d_inode);
+ int cpu = iminor(file->f_path.dentry->d_inode);
int err;
if (count % 8)
const u32 __user *tmp = (const u32 __user *)buf;
u32 data[2];
u32 reg = *ppos;
- int cpu = iminor(file->f_dentry->d_inode);
+ int cpu = iminor(file->f_path.dentry->d_inode);
int err;
if (count % 8)
static int msr_open(struct inode *inode, struct file *file)
{
- unsigned int cpu = iminor(file->f_dentry->d_inode);
+ unsigned int cpu = iminor(file->f_path.dentry->d_inode);
struct cpuinfo_x86 *c = &(cpu_data)[cpu];
if (cpu >= NR_CPUS || !cpu_online(cpu))
return 0;
}
+static int endflag __initdata = 0;
+
#ifdef CONFIG_SMP
/* The performance counters used by NMI_LOCAL_APIC don't trigger when
* the CPU is idle. To make sure the NMI watchdog really ticks on all
*/
static __init void nmi_cpu_busy(void *data)
{
- volatile int *endflag = data;
local_irq_enable_in_hardirq();
/* Intentionally don't use cpu_relax here. This is
to make sure that the performance counter really ticks,
pause instruction. On a real HT machine this is fine because
all other CPUs are busy with "useless" delay loops and don't
care if they get somewhat less cycles. */
- while (*endflag == 0)
- barrier();
+ while (endflag == 0)
+ mb();
}
#endif
static int __init check_nmi_watchdog(void)
{
- volatile int endflag = 0;
unsigned int *prev_nmi_count;
int cpu;
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev)
{
+ u8 config, rev;
+ u32 word;
+
+ /* BIOS may enable hardware IRQ balancing for
+ * E7520/E7320/E7525(revision ID 0x9 and below)
+ * based platforms.
+ * For those platforms, make sure that the genapic is set to 'flat'
+ */
+ pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
+ if (rev > 0x9)
+ return;
+
+ /* enable access to config space*/
+ pci_read_config_byte(dev, 0xf4, &config);
+ pci_write_config_byte(dev, 0xf4, config|0x2);
+
+ /* read xTPR register */
+ raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
+
+ if (!(word & (1 << 13))) {
#ifdef CONFIG_X86_64
- if (genapic != &apic_flat)
- panic("APIC mode must be flat on this system\n");
+ if (genapic != &apic_flat)
+ panic("APIC mode must be flat on this system\n");
#elif defined(CONFIG_X86_GENERICARCH)
- if (genapic != &apic_default)
- panic("APIC mode must be default(flat) on this system. Use apic=default\n");
+ if (genapic != &apic_default)
+ panic("APIC mode must be default(flat) on this system. Use apic=default\n");
#endif
+ }
+
+ /* put back the original value for config space*/
+ if (!(config & 0x2))
+ pci_write_config_byte(dev, 0xf4, config);
}
void __init quirk_intel_irqbalance(void)
/* Number of siblings per CPU package */
int smp_num_siblings = 1;
-#ifdef CONFIG_X86_HT
EXPORT_SYMBOL(smp_num_siblings);
-#endif
/* Last level cache ID of each logical CPU */
int cpu_llc_id[NR_CPUS] __cpuinitdata = {[0 ... NR_CPUS-1] = BAD_APICID};
/* init low mem mapping */
clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
- KERNEL_PGD_PTRS);
+ min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS));
flush_tlb_all();
schedule_work(&info.task);
wait_for_completion(&done);
#include <linux/unwind.h>
#include <linux/uaccess.h>
#include <linux/nmi.h>
+#include <linux/bug.h>
#ifdef CONFIG_EISA
#include <linux/ioport.h>
printk("\n");
}
-static void handle_BUG(struct pt_regs *regs)
+int is_valid_bugaddr(unsigned long eip)
{
- unsigned long eip = regs->eip;
unsigned short ud2;
if (eip < PAGE_OFFSET)
- return;
+ return 0;
if (probe_kernel_address((unsigned short *)eip, ud2))
- return;
- if (ud2 != 0x0b0f)
- return;
-
- printk(KERN_EMERG "------------[ cut here ]------------\n");
-
-#ifdef CONFIG_DEBUG_BUGVERBOSE
- do {
- unsigned short line;
- char *file;
- char c;
-
- if (probe_kernel_address((unsigned short *)(eip + 2), line))
- break;
- if (probe_kernel_address((char **)(eip + 4), file) ||
- (unsigned long)file < PAGE_OFFSET ||
- probe_kernel_address(file, c))
- file = "<bad filename>";
+ return 0;
- printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
- return;
- } while (0);
-#endif
- printk(KERN_EMERG "Kernel BUG at [verbose debug info unavailable]\n");
+ return ud2 == 0x0b0f;
}
-/* This is gone through when something in the kernel
- * has done something bad and is about to be terminated.
-*/
+/*
+ * This is gone through when something in the kernel has done something bad and
+ * is about to be terminated.
+ */
void die(const char * str, struct pt_regs * regs, long err)
{
static struct {
unsigned long esp;
unsigned short ss;
- handle_BUG(regs);
+ report_bug(regs->eip);
+
printk(KERN_EMERG "%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
#ifdef CONFIG_PREEMPT
printk(KERN_EMERG "PREEMPT ");
OUTPUT_ARCH(i386)
ENTRY(phys_startup_32)
jiffies = jiffies_64;
+_proxy_pda = 0;
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
RODATA
+ BUG_TABLE
+
. = ALIGN(4);
.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
__tracedata_start = .;
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/fixmap.h>
#include <asm/arch_hooks.h>
unsigned long sgivwfb_mem_phys;
unsigned long sgivwfb_mem_size;
+EXPORT_SYMBOL(sgivwfb_mem_phys);
+EXPORT_SYMBOL(sgivwfb_mem_size);
long long mem_size __initdata = 0;
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_FIND_NEXT_BIT
bool
default y
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
unsigned int cflag = tty->termios->c_cflag;
if (!(flags & MAP_ANONYMOUS)) {
/* read the file contents */
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if (!inode->i_fop || !file->f_op->read
|| ((*file->f_op->read)(file, (char __user *) start, end - start, &off) < 0))
{
if (!is_congruent) {
/* read the file contents */
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if (!inode->i_fop || !file->f_op->read
|| ((*file->f_op->read)(file, (char __user *) pstart, pend - pstart, &poff)
< 0))
obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o
obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o
obj-$(CONFIG_AUDIT) += audit.o
obj-$(CONFIG_PCI_MSI) += msi_ia64.o
#include <asm/kdebug.h>
#include <asm/mca.h>
-#include <asm/uaccess.h>
int kdump_status[NR_CPUS];
atomic_t kdump_cpu_freezed;
atomic_t kdump_in_progress;
int kdump_on_init = 1;
-ssize_t
-copy_oldmem_page(unsigned long pfn, char *buf,
- size_t csize, unsigned long offset, int userbuf)
-{
- void *vaddr;
-
- if (!csize)
- return 0;
- vaddr = __va(pfn<<PAGE_SHIFT);
- if (userbuf) {
- if (copy_to_user(buf, (vaddr + offset), csize)) {
- return -EFAULT;
- }
- } else
- memcpy(buf, (vaddr + offset), csize);
- return csize;
-}
static inline Elf64_Word
*append_elf_note(Elf64_Word *buf, char *name, unsigned type, void *data,
static int
machine_crash_setup(void)
{
- char *from = strstr(saved_command_line, "elfcorehdr=");
static struct notifier_block kdump_init_notifier_nb = {
.notifier_call = kdump_init_notifier,
};
int ret;
- if (from)
- elfcorehdr_addr = memparse(from+11, &from);
- saved_max_pfn = (unsigned long)-1;
if((ret = register_die_notifier(&kdump_init_notifier_nb)) != 0)
return ret;
#ifdef CONFIG_SYSCTL
--- /dev/null
+/*
+ * kernel/crash_dump.c - Memory preserving reboot related code.
+ *
+ * Created by: Simon Horman <horms@verge.net.au>
+ * Original code moved from kernel/crash.c
+ * Original code comment copied from the i386 version of this file
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#include <linux/uaccess.h>
+
+/**
+ * copy_oldmem_page - copy one page from "oldmem"
+ * @pfn: page frame number to be copied
+ * @buf: target memory address for the copy; this can be in kernel address
+ * space or user address space (see @userbuf)
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page (based on pfn) to begin the copy
+ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
+ * otherwise @buf is in kernel address space, use memcpy().
+ *
+ * Copy a page from "oldmem". For this page, there is no pte mapped
+ * in the current kernel. We stitch up a pte, similar to kmap_atomic.
+ *
+ * Calling copy_to_user() in atomic context is not desirable. Hence first
+ * copying the data to a pre-allocated kernel page and then copying to user
+ * space in non-atomic context.
+ */
+ssize_t
+copy_oldmem_page(unsigned long pfn, char *buf,
+ size_t csize, unsigned long offset, int userbuf)
+{
+ void *vaddr;
+
+ if (!csize)
+ return 0;
+ vaddr = __va(pfn<<PAGE_SHIFT);
+ if (userbuf) {
+ if (copy_to_user(buf, (vaddr + offset), csize)) {
+ return -EFAULT;
+ }
+ } else
+ memcpy(buf, (vaddr + offset), csize);
+ return csize;
+}
+
* to the correct location.
*/
#include <asm/asmmacro.h>
+#include <asm-ia64/break.h>
/*
* void jprobe_break(void)
*/
.section .kprobes.text, "ax"
ENTRY(jprobe_break)
- break.m 0x80300
+ break.m __IA64_BREAK_JPROBE
END(jprobe_break)
/*
{
p->ainsn.inst_flag = 0;
p->ainsn.target_br_reg = 0;
+ p->ainsn.slot = slot;
/* Check for Break instruction
* Bits 37:40 Major opcode to be zero
/*
* In this function we check to see if the instruction
- * on which we are inserting kprobe is supported.
- * Returns 0 if supported
- * Returns -EINVAL if unsupported
- */
-static int __kprobes unsupported_inst(uint template, uint slot,
- uint major_opcode,
- unsigned long kprobe_inst,
- unsigned long addr)
-{
- if (bundle_encoding[template][slot] == I) {
- switch (major_opcode) {
- case 0x0: //I_UNIT_MISC_OPCODE:
- /*
- * Check for Integer speculation instruction
- * - Bit 33-35 to be equal to 0x1
- */
- if (((kprobe_inst >> 33) & 0x7) == 1) {
- printk(KERN_WARNING
- "Kprobes on speculation inst at <0x%lx> not supported\n",
- addr);
- return -EINVAL;
- }
-
- /*
- * IP relative mov instruction
- * - Bit 27-35 to be equal to 0x30
- */
- if (((kprobe_inst >> 27) & 0x1FF) == 0x30) {
- printk(KERN_WARNING
- "Kprobes on \"mov r1=ip\" at <0x%lx> not supported\n",
- addr);
- return -EINVAL;
-
- }
- }
- }
- return 0;
-}
-
-
-/*
- * In this function we check to see if the instruction
* (qp) cmpx.crel.ctype p1,p2=r2,r3
* on which we are inserting kprobe is cmp instruction
* with ctype as unc.
}
/*
+ * In this function we check to see if the instruction
+ * on which we are inserting kprobe is supported.
+ * Returns qp value if supported
+ * Returns -EINVAL if unsupported
+ */
+static int __kprobes unsupported_inst(uint template, uint slot,
+ uint major_opcode,
+ unsigned long kprobe_inst,
+ unsigned long addr)
+{
+ int qp;
+
+ qp = kprobe_inst & 0x3f;
+ if (is_cmp_ctype_unc_inst(template, slot, major_opcode, kprobe_inst)) {
+ if (slot == 1 && qp) {
+ printk(KERN_WARNING "Kprobes on cmp unc"
+ "instruction on slot 1 at <0x%lx>"
+ "is not supported\n", addr);
+ return -EINVAL;
+
+ }
+ qp = 0;
+ }
+ else if (bundle_encoding[template][slot] == I) {
+ if (major_opcode == 0) {
+ /*
+ * Check for Integer speculation instruction
+ * - Bit 33-35 to be equal to 0x1
+ */
+ if (((kprobe_inst >> 33) & 0x7) == 1) {
+ printk(KERN_WARNING
+ "Kprobes on speculation inst at <0x%lx> not supported\n",
+ addr);
+ return -EINVAL;
+ }
+ /*
+ * IP relative mov instruction
+ * - Bit 27-35 to be equal to 0x30
+ */
+ if (((kprobe_inst >> 27) & 0x1FF) == 0x30) {
+ printk(KERN_WARNING
+ "Kprobes on \"mov r1=ip\" at <0x%lx> not supported\n",
+ addr);
+ return -EINVAL;
+
+ }
+ }
+ else if ((major_opcode == 5) && !(kprobe_inst & (0xFUl << 33)) &&
+ (kprobe_inst & (0x1UL << 12))) {
+ /* test bit instructions, tbit,tnat,tf
+ * bit 33-36 to be equal to 0
+ * bit 12 to be equal to 1
+ */
+ if (slot == 1 && qp) {
+ printk(KERN_WARNING "Kprobes on test bit"
+ "instruction on slot at <0x%lx>"
+ "is not supported\n", addr);
+ return -EINVAL;
+ }
+ qp = 0;
+ }
+ }
+ else if (bundle_encoding[template][slot] == B) {
+ if (major_opcode == 7) {
+ /* IP-Relative Predict major code is 7 */
+ printk(KERN_WARNING "Kprobes on IP-Relative"
+ "Predict is not supported\n");
+ return -EINVAL;
+ }
+ else if (major_opcode == 2) {
+ /* Indirect Predict, major code is 2
+ * bit 27-32 to be equal to 10 or 11
+ */
+ int x6=(kprobe_inst >> 27) & 0x3F;
+ if ((x6 == 0x10) || (x6 == 0x11)) {
+ printk(KERN_WARNING "Kprobes on"
+ "Indirect Predict is not supported\n");
+ return -EINVAL;
+ }
+ }
+ }
+ /* kernel does not use float instruction, here for safety kprobe
+ * will judge whether it is fcmp/flass/float approximation instruction
+ */
+ else if (unlikely(bundle_encoding[template][slot] == F)) {
+ if ((major_opcode == 4 || major_opcode == 5) &&
+ (kprobe_inst & (0x1 << 12))) {
+ /* fcmp/fclass unc instruction */
+ if (slot == 1 && qp) {
+ printk(KERN_WARNING "Kprobes on fcmp/fclass "
+ "instruction on slot at <0x%lx> "
+ "is not supported\n", addr);
+ return -EINVAL;
+
+ }
+ qp = 0;
+ }
+ if ((major_opcode == 0 || major_opcode == 1) &&
+ (kprobe_inst & (0x1UL << 33))) {
+ /* float Approximation instruction */
+ if (slot == 1 && qp) {
+ printk(KERN_WARNING "Kprobes on float Approx "
+ "instr at <0x%lx> is not supported\n",
+ addr);
+ return -EINVAL;
+ }
+ qp = 0;
+ }
+ }
+ return qp;
+}
+
+/*
* In this function we override the bundle with
* the break instruction at the given slot.
*/
static void __kprobes prepare_break_inst(uint template, uint slot,
uint major_opcode,
unsigned long kprobe_inst,
- struct kprobe *p)
+ struct kprobe *p,
+ int qp)
{
unsigned long break_inst = BREAK_INST;
bundle_t *bundle = &p->opcode.bundle;
/*
* Copy the original kprobe_inst qualifying predicate(qp)
- * to the break instruction iff !is_cmp_ctype_unc_inst
- * because for cmp instruction with ctype equal to unc,
- * which is a special instruction always needs to be
- * executed regradless of qp
+ * to the break instruction
*/
- if (!is_cmp_ctype_unc_inst(template, slot, major_opcode, kprobe_inst))
- break_inst |= (0x3f & kprobe_inst);
+ break_inst |= qp;
switch (slot) {
case 0:
return -EINVAL;
}
- if (slot == 1 && bundle_encoding[template][1] != L) {
- printk(KERN_WARNING "Inserting kprobes on slot #1 "
- "is not supported\n");
- return -EINVAL;
- }
-
return 0;
}
unsigned long kprobe_inst=0;
unsigned int slot = addr & 0xf, template, major_opcode = 0;
bundle_t *bundle;
+ int qp;
bundle = &((kprobe_opcode_t *)kprobe_addr)->bundle;
template = bundle->quad0.template;
/* Get kprobe_inst and major_opcode from the bundle */
get_kprobe_inst(bundle, slot, &kprobe_inst, &major_opcode);
- if (unsupported_inst(template, slot, major_opcode, kprobe_inst, addr))
- return -EINVAL;
-
+ qp = unsupported_inst(template, slot, major_opcode, kprobe_inst, addr);
+ if (qp < 0)
+ return -EINVAL;
p->ainsn.insn = get_insn_slot();
if (!p->ainsn.insn)
memcpy(&p->opcode, kprobe_addr, sizeof(kprobe_opcode_t));
memcpy(p->ainsn.insn, kprobe_addr, sizeof(kprobe_opcode_t));
- prepare_break_inst(template, slot, major_opcode, kprobe_inst, p);
+ prepare_break_inst(template, slot, major_opcode, kprobe_inst, p, qp);
return 0;
}
void __kprobes arch_arm_kprobe(struct kprobe *p)
{
- unsigned long addr = (unsigned long)p->addr;
- unsigned long arm_addr = addr & ~0xFULL;
+ unsigned long arm_addr;
+ bundle_t *src, *dest;
+
+ arm_addr = ((unsigned long)p->addr) & ~0xFUL;
+ dest = &((kprobe_opcode_t *)arm_addr)->bundle;
+ src = &p->opcode.bundle;
flush_icache_range((unsigned long)p->ainsn.insn,
(unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
- memcpy((char *)arm_addr, &p->opcode, sizeof(kprobe_opcode_t));
+ switch (p->ainsn.slot) {
+ case 0:
+ dest->quad0.slot0 = src->quad0.slot0;
+ break;
+ case 1:
+ dest->quad1.slot1_p1 = src->quad1.slot1_p1;
+ break;
+ case 2:
+ dest->quad1.slot2 = src->quad1.slot2;
+ break;
+ }
flush_icache_range(arm_addr, arm_addr + sizeof(kprobe_opcode_t));
}
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
- unsigned long addr = (unsigned long)p->addr;
- unsigned long arm_addr = addr & ~0xFULL;
+ unsigned long arm_addr;
+ bundle_t *src, *dest;
+ arm_addr = ((unsigned long)p->addr) & ~0xFUL;
+ dest = &((kprobe_opcode_t *)arm_addr)->bundle;
/* p->ainsn.insn contains the original unaltered kprobe_opcode_t */
- memcpy((char *) arm_addr, (char *) p->ainsn.insn,
- sizeof(kprobe_opcode_t));
+ src = &p->ainsn.insn->bundle;
+ switch (p->ainsn.slot) {
+ case 0:
+ dest->quad0.slot0 = src->quad0.slot0;
+ break;
+ case 1:
+ dest->quad1.slot1_p1 = src->quad1.slot1_p1;
+ break;
+ case 2:
+ dest->quad1.slot2 = src->quad1.slot2;
+ break;
+ }
flush_icache_range(arm_addr, arm_addr + sizeof(kprobe_opcode_t));
}
switch(val) {
case DIE_BREAK:
/* err is break number from ia64_bad_break() */
- if (args->err == 0x80200 || args->err == 0x80300 || args->err == 0)
+ if ((args->err >> 12) == (__IA64_BREAK_KPROBE >> 12)
+ || args->err == __IA64_BREAK_JPROBE
+ || args->err == 0)
if (pre_kprobes_handler(args))
ret = NOTIFY_STOP;
break;
#include <asm/delay.h>
#include <asm/meminit.h>
-typedef void (*relocate_new_kernel_t)(unsigned long, unsigned long,
- struct ia64_boot_param *, unsigned long);
+typedef NORET_TYPE void (*relocate_new_kernel_t)(
+ unsigned long indirection_page,
+ unsigned long start_address,
+ struct ia64_boot_param *boot_param,
+ unsigned long pal_addr) ATTRIB_NORET;
struct kimage *ia64_kimage;
} else {
/* Dump buffered message to console */
ia64_mlogbuf_finish(1);
-#ifdef CONFIG_CRASH_DUMP
+#ifdef CONFIG_KEXEC
atomic_set(&kdump_in_progress, 1);
monarch_cpu = -1;
#endif
/*
* allocate a new dcache entry
*/
- file->f_dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this);
- if (!file->f_dentry) goto out;
+ file->f_path.dentry = d_alloc(pfmfs_mnt->mnt_sb->s_root, &this);
+ if (!file->f_path.dentry) goto out;
- file->f_dentry->d_op = &pfmfs_dentry_operations;
+ file->f_path.dentry->d_op = &pfmfs_dentry_operations;
- d_add(file->f_dentry, inode);
- file->f_vfsmnt = mntget(pfmfs_mnt);
+ d_add(file->f_path.dentry, inode);
+ file->f_path.mnt = mntget(pfmfs_mnt);
file->f_mapping = inode->i_mapping;
file->f_op = &pfm_file_ops;
static ssize_t
salinfo_event_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct proc_dir_entry *entry = PDE(inode);
struct salinfo_data *data = entry->data;
char cmd[32];
static ssize_t
salinfo_log_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct proc_dir_entry *entry = PDE(inode);
struct salinfo_data *data = entry->data;
u8 *buf;
static ssize_t
salinfo_log_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct proc_dir_entry *entry = PDE(inode);
struct salinfo_data *data = entry->data;
char cmd[32];
#ifdef CONFIG_KEXEC
/* crashkernel=size@offset specifies the size to reserve for a crash
- * kernel.(offset is ingored for keep compatibility with other archs)
+ * kernel. If offset is 0, then it is determined automatically.
* By reserving this memory we guarantee that linux never set's it
* up as a DMA target.Useful for holding code to do something
* appropriate after a kernel panic.
unsigned long base, size;
if (from) {
size = memparse(from + 12, &from);
+ if (*from == '@')
+ base = memparse(from+1, &from);
+ else
+ base = 0;
if (size) {
- sort_regions(rsvd_region, n);
- base = kdump_find_rsvd_region(size,
- rsvd_region, n);
+ if (!base) {
+ sort_regions(rsvd_region, n);
+ base = kdump_find_rsvd_region(size,
+ rsvd_region, n);
+ }
if (base != ~0UL) {
rsvd_region[n].start =
(unsigned long)__va(base);
}
early_param("nomca", setup_nomca);
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ elfcorehdr_addr = memparse(arg, &arg);
+ return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+#endif /* CONFIG_PROC_VMCORE */
+
void __init
setup_arch (char **cmdline_p)
{
{
char brand[128];
+ memcpy(brand, "Unknown", 8);
if (ia64_pal_get_brand_info(brand)) {
if (family == 0x7)
memcpy(brand, "Merced", 7);
case 0: memcpy(brand, "McKinley", 9); break;
case 1: memcpy(brand, "Madison", 8); break;
case 2: memcpy(brand, "Madison up to 9M cache", 23); break;
- } else
- memcpy(brand, "Unknown", 8);
+ }
}
if (brandname[0] == '\0')
return strcpy(brandname, brand);
case IPI_CPU_STOP:
stop_this_cpu();
break;
-#ifdef CONFIG_CRASH_DUMP
+#ifdef CONFIG_KEXEC
case IPI_KDUMP_CPU_STOP:
unw_init_running(kdump_cpu_freeze, NULL);
break;
send_IPI_single(smp_processor_id(), op);
}
-#ifdef CONFIG_CRASH_DUMP
+#ifdef CONFIG_KEXEC
void
kdump_smp_send_stop()
{
return ret.status;
}
+struct fpu_swa_msg {
+ unsigned long count;
+ unsigned long time;
+};
+static DEFINE_PER_CPU(struct fpu_swa_msg, cpulast);
+DECLARE_PER_CPU(struct fpu_swa_msg, cpulast);
+static struct fpu_swa_msg last __cacheline_aligned;
+
+
/*
* Handle floating-point assist faults and traps.
*/
long exception, bundle[2];
unsigned long fault_ip;
struct siginfo siginfo;
- static int fpu_swa_count = 0;
- static unsigned long last_time;
fault_ip = regs->cr_iip;
if (!fp_fault && (ia64_psr(regs)->ri == 0))
if (copy_from_user(bundle, (void __user *) fault_ip, sizeof(bundle)))
return -1;
- if (jiffies - last_time > 5*HZ)
- fpu_swa_count = 0;
- if ((fpu_swa_count < 4) && !(current->thread.flags & IA64_THREAD_FPEMU_NOPRINT)) {
- last_time = jiffies;
- ++fpu_swa_count;
- printk(KERN_WARNING
- "%s(%d): floating-point assist fault at ip %016lx, isr %016lx\n",
- current->comm, current->pid, regs->cr_iip + ia64_psr(regs)->ri, isr);
+ if (!(current->thread.flags & IA64_THREAD_FPEMU_NOPRINT)) {
+ unsigned long count, current_jiffies = jiffies;
+ struct fpu_swa_msg *cp = &__get_cpu_var(cpulast);
+
+ if (unlikely(current_jiffies > cp->time))
+ cp->count = 0;
+ if (unlikely(cp->count < 5)) {
+ cp->count++;
+ cp->time = current_jiffies + 5 * HZ;
+
+ /* minimize races by grabbing a copy of count BEFORE checking last.time. */
+ count = last.count;
+ barrier();
+
+ /*
+ * Lower 4 bits are used as a count. Upper bits are a sequence
+ * number that is updated when count is reset. The cmpxchg will
+ * fail is seqno has changed. This minimizes mutiple cpus
+ * reseting the count.
+ */
+ if (current_jiffies > last.time)
+ (void) cmpxchg_acq(&last.count, count, 16 + (count & ~15));
+
+ /* used fetchadd to atomically update the count */
+ if ((last.count & 15) < 5 && (ia64_fetchadd(1, &last.count, acq) & 15) < 5) {
+ last.time = current_jiffies + 5 * HZ;
+ printk(KERN_WARNING
+ "%s(%d): floating-point assist fault at ip %016lx, isr %016lx\n",
+ current->comm, current->pid, regs->cr_iip + ia64_psr(regs)->ri, isr);
+ }
+ }
}
exception = fp_emulate(fp_fault, bundle, ®s->cr_ipsr, ®s->ar_fpsr, &isr, ®s->pr,
reserve_bootmem(bootmap_start, bootmap_size);
find_initrd();
+
+#ifdef CONFIG_CRASH_DUMP
+ /* If we are doing a crash dump, we still need to know the real mem
+ * size before original memory map is * reset. */
+ saved_max_pfn = max_pfn;
+#endif
}
#ifdef CONFIG_SMP
paging_init (void)
{
unsigned long max_dma;
- unsigned long nid = 0;
unsigned long max_zone_pfns[MAX_NR_ZONES];
num_physpages = 0;
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_VIRTUAL_MEM_MAP
- efi_memmap_walk(register_active_ranges, &nid);
+ efi_memmap_walk(register_active_ranges, NULL);
efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
if (max_gap < LARGE_GAP) {
vmem_map = (struct page *) 0;
}
int __init
-register_active_ranges(u64 start, u64 end, void *nid)
+register_active_ranges(u64 start, u64 end, void *arg)
{
- BUG_ON(nid == NULL);
- BUG_ON(*(unsigned long *)nid >= MAX_NUMNODES);
-
- add_active_range(*(unsigned long *)nid,
- __pa(start) >> PAGE_SHIFT,
- __pa(end) >> PAGE_SHIFT);
+ add_active_range(0, __pa(start) >> PAGE_SHIFT, __pa(end) >> PAGE_SHIFT);
return 0;
}
#endif /* CONFIG_VIRTUAL_MEM_MAP */
int slice;
int cnode;
int i;
- static int wars_have_been_checked;
+ static int wars_have_been_checked, set_cpu0_number;
cpuid = smp_processor_id();
if (cpuid == 0 && IS_MEDUSA()) {
/*
* Don't check status. The SAL call is not supported on all PROMs
* but a failure is harmless.
+ * Architechtuallly, cpu_init is always called twice on cpu 0. We
+ * should set cpu_number on cpu 0 once.
*/
- (void) ia64_sn_set_cpu_number(cpuid);
+ if (cpuid == 0) {
+ if (!set_cpu0_number) {
+ (void) ia64_sn_set_cpu_number(cpuid);
+ set_cpu0_number = 1;
+ }
+ } else
+ (void) ia64_sn_set_cpu_number(cpuid);
/*
* The boot cpu makes this call again after platform initialization is
int e;
for (sz = PAGE_SIZE; sz < 16 * PAGE_SIZE; sz += PAGE_SIZE) {
- if (!(p = (char *)kmalloc(sz, GFP_KERNEL)))
+ if (!(p = kmalloc(sz, GFP_KERNEL)))
break;
e = ia64_sn_ioif_get_pci_topology(__pa(p), sz);
if (e == SALRET_OK)
ch->number, ch->partid);
spin_unlock_irqrestore(&ch->lock, *irq_flags);
- xpc_create_kthreads(ch, 1);
+ xpc_create_kthreads(ch, 1, 0);
spin_lock_irqsave(&ch->lock, *irq_flags);
}
/* make sure all activity has settled down first */
- if (atomic_read(&ch->references) > 0 ||
- ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
- !(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE))) {
+ if (atomic_read(&ch->kthreads_assigned) > 0 ||
+ atomic_read(&ch->references) > 0) {
return;
}
- DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0);
+ DBUG_ON((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
+ !(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE));
if (part->act_state == XPC_P_DEACTIVATING) {
/* can't proceed until the other side disengages from us */
/* wake all idle kthreads so they can exit */
if (atomic_read(&ch->kthreads_idle) > 0) {
wake_up_all(&ch->idle_wq);
+
+ } else if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
+ !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
+ /* start a kthread that will do the xpcDisconnecting callout */
+ xpc_create_kthreads(ch, 1, 1);
}
/* wake those waiting to allocate an entry from the local msg queue */
dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n",
needed, ch->partid, ch->number);
- xpc_create_kthreads(ch, needed);
+ xpc_create_kthreads(ch, needed, 0);
}
xpc_kthread_waitmsgs(part, ch);
}
- if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
- spin_lock_irqsave(&ch->lock, irq_flags);
- if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
- !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
- ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
+ /* let registerer know that connection is disconnecting */
- xpc_disconnect_callout(ch, xpcDisconnecting);
-
- spin_lock_irqsave(&ch->lock, irq_flags);
- ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
- }
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
+ !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
+ ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ xpc_disconnect_callout(ch, xpcDisconnecting);
+
+ spin_lock_irqsave(&ch->lock, irq_flags);
+ ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
+ }
+ spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
if (atomic_dec_return(&part->nchannels_engaged) == 0) {
xpc_mark_partition_disengaged(part);
xpc_IPI_send_disengage(part);
}
}
-
xpc_msgqueue_deref(ch);
dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n",
* partition.
*/
void
-xpc_create_kthreads(struct xpc_channel *ch, int needed)
+xpc_create_kthreads(struct xpc_channel *ch, int needed,
+ int ignore_disconnecting)
{
unsigned long irq_flags;
pid_t pid;
* kthread. That kthread is responsible for doing the
* counterpart to the following before it exits.
*/
+ if (ignore_disconnecting) {
+ if (!atomic_inc_not_zero(&ch->kthreads_assigned)) {
+ /* kthreads assigned had gone to zero */
+ BUG_ON(!(ch->flags &
+ XPC_C_DISCONNECTINGCALLOUT_MADE));
+ break;
+ }
+
+ } else if (ch->flags & XPC_C_DISCONNECTING) {
+ break;
+
+ } else if (atomic_inc_return(&ch->kthreads_assigned) == 1) {
+ if (atomic_inc_return(&part->nchannels_engaged) == 1)
+ xpc_mark_partition_engaged(part);
+ }
(void) xpc_part_ref(part);
xpc_msgqueue_ref(ch);
- if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
- atomic_inc_return(&part->nchannels_engaged) == 1) {
- xpc_mark_partition_engaged(part);
- }
pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0);
if (pid < 0) {
/* the fork failed */
+
+ /*
+ * NOTE: if (ignore_disconnecting &&
+ * !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true,
+ * then we'll deadlock if all other kthreads assigned
+ * to this channel are blocked in the channel's
+ * registerer, because the only thing that will unblock
+ * them is the xpcDisconnecting callout that this
+ * failed kernel_thread would have made.
+ */
+
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
xpc_mark_partition_disengaged(part);
* Flag this as an error only if we have an
* insufficient #of kthreads for the channel
* to function.
- *
- * No xpc_msgqueue_ref() is needed here since
- * the channel mgr is doing this.
*/
spin_lock_irqsave(&ch->lock, irq_flags);
XPC_DISCONNECT_CHANNEL(ch, xpcLackOfResources,
bool
default n
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_FIND_NEXT_BIT
bool
default y
* arch/m32r/boot/compressed/m32r_sio.c
*
* 2003-02-12: Takeo Takahashi
+ * 2006-11-30: OPSPUT support by Kazuhiro Inaoka
*
*/
return 0;
}
-#if defined(CONFIG_PLAT_M32700UT_Alpha) || defined(CONFIG_PLAT_M32700UT)
+#if defined(CONFIG_PLAT_M32700UT_Alpha) || defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT)
#include <asm/m32r.h>
#include <asm/io.h>
#define BOOT_SIO0TXB (volatile unsigned short *)(0x02c00000 + 0x2000c)
#else
#undef PLD_BASE
+#if defined(CONFIG_PLAT_OPSPUT)
+#define PLD_BASE 0x1cc00000
+#else
#define PLD_BASE 0xa4c00000
+#endif
#define BOOT_SIO0STS PLD_ESIO0STS
#define BOOT_SIO0TXB PLD_ESIO0TXB
#endif
* updated in fork.c:copy_thread, signal.c:do_signal,
* ptrace.c and ptrace.h
*
- * M32Rx/M32R2 M32R
- * @(sp) - r4 ditto
- * @(0x04,sp) - r5 ditto
- * @(0x08,sp) - r6 ditto
- * @(0x0c,sp) - *pt_regs ditto
- * @(0x10,sp) - r0 ditto
- * @(0x14,sp) - r1 ditto
- * @(0x18,sp) - r2 ditto
- * @(0x1c,sp) - r3 ditto
- * @(0x20,sp) - r7 ditto
- * @(0x24,sp) - r8 ditto
- * @(0x28,sp) - r9 ditto
- * @(0x2c,sp) - r10 ditto
- * @(0x30,sp) - r11 ditto
- * @(0x34,sp) - r12 ditto
- * @(0x38,sp) - syscall_nr ditto
- * @(0x3c,sp) - acc0h @(0x3c,sp) - acch
- * @(0x40,sp) - acc0l @(0x40,sp) - accl
- * @(0x44,sp) - acc1h @(0x44,sp) - dummy_acc1h
- * @(0x48,sp) - acc1l @(0x48,sp) - dummy_acc1l
- * @(0x4c,sp) - psw ditto
- * @(0x50,sp) - bpc ditto
- * @(0x54,sp) - bbpsw ditto
- * @(0x58,sp) - bbpc ditto
- * @(0x5c,sp) - spu (cr3) ditto
- * @(0x60,sp) - fp (r13) ditto
- * @(0x64,sp) - lr (r14) ditto
- * @(0x68,sp) - spi (cr2) ditto
- * @(0x6c,sp) - orig_r0 ditto
+ * M32R/M32Rx/M32R2
+ * @(sp) - r4
+ * @(0x04,sp) - r5
+ * @(0x08,sp) - r6
+ * @(0x0c,sp) - *pt_regs
+ * @(0x10,sp) - r0
+ * @(0x14,sp) - r1
+ * @(0x18,sp) - r2
+ * @(0x1c,sp) - r3
+ * @(0x20,sp) - r7
+ * @(0x24,sp) - r8
+ * @(0x28,sp) - r9
+ * @(0x2c,sp) - r10
+ * @(0x30,sp) - r11
+ * @(0x34,sp) - r12
+ * @(0x38,sp) - syscall_nr
+ * @(0x3c,sp) - acc0h
+ * @(0x40,sp) - acc0l
+ * @(0x44,sp) - acc1h ; ISA_DSP_LEVEL2 only
+ * @(0x48,sp) - acc1l ; ISA_DSP_LEVEL2 only
+ * @(0x4c,sp) - psw
+ * @(0x50,sp) - bpc
+ * @(0x54,sp) - bbpsw
+ * @(0x58,sp) - bbpc
+ * @(0x5c,sp) - spu (cr3)
+ * @(0x60,sp) - fp (r13)
+ * @(0x64,sp) - lr (r14)
+ * @(0x68,sp) - spi (cr2)
+ * @(0x6c,sp) - orig_r0
*/
#include <linux/linkage.h>
#define R11(reg) @(0x30,reg)
#define R12(reg) @(0x34,reg)
#define SYSCALL_NR(reg) @(0x38,reg)
-#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
#define ACC0H(reg) @(0x3C,reg)
#define ACC0L(reg) @(0x40,reg)
#define ACC1H(reg) @(0x44,reg)
#define ACC1L(reg) @(0x48,reg)
-#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
-#define ACCH(reg) @(0x3C,reg)
-#define ACCL(reg) @(0x40,reg)
-#else
-#error unknown isa configuration
-#endif
#define PSW(reg) @(0x4C,reg)
#define BPC(reg) @(0x50,reg)
#define BBPSW(reg) @(0x54,reg)
beqz r1, inst
oprand:
ld r2, @(low(MDEVA_offset),r2) ; set address
- srli r2, #12
- slli r2, #12
srli r1, #1
bra 1f
inst:
extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */
-#define PORT2ADDR(port) _port2addr(port)
-#define PORT2ADDR_USB(port) _port2addr_usb(port)
+#define PORT2ADDR(port) _port2addr(port)
+#define PORT2ADDR_USB(port) _port2addr_usb(port)
static inline void *_port2addr(unsigned long port)
{
return (void *)(port | NONCACHE_OFFSET);
}
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+static inline void *__port2addr_ata(unsigned long port)
+{
+ static int dummy_reg;
+
+ switch (port) {
+ case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET);
+ case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET);
+ case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET);
+ case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET);
+ case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET);
+ case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET);
+ case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET);
+ case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET);
+ case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET);
+ default: return (void *)&dummy_reg;
+ }
+}
+#endif
+
/*
* OPSPUT-LAN is located in the extended bus space
* from 0x10000000 to 0x13ffffff on physical address.
{
if (port >= LAN_IOSTART && port < LAN_IOEND)
return _ne_inb(PORT2ADDR_NE(port));
+
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+ else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+ return *(volatile unsigned char *)__port2addr_ata(port);
+ }
+#endif
#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
unsigned char b;
{
if (port >= LAN_IOSTART && port < LAN_IOEND)
return _ne_inw(PORT2ADDR_NE(port));
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+ else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+ return *(volatile unsigned short *)__port2addr_ata(port);
+ }
+#endif
#if defined(CONFIG_USB)
else if(port >= 0x340 && port < 0x3a0)
return *(volatile unsigned short *)PORT2ADDR_USB(port);
if (port >= LAN_IOSTART && port < LAN_IOEND)
_ne_outb(b, PORT2ADDR_NE(port));
else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+ if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+ *(volatile unsigned char *)__port2addr_ata(port) = b;
+ } else
+#endif
#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
if (port >= LAN_IOSTART && port < LAN_IOEND)
_ne_outw(w, PORT2ADDR_NE(port));
else
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+ if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+ *(volatile unsigned short *)__port2addr_ata(port) = w;
+ } else
+#endif
#if defined(CONFIG_USB)
if(port >= 0x340 && port < 0x3a0)
*(volatile unsigned short *)PORT2ADDR_USB(port) = w;
{
if (port >= LAN_IOSTART && port < LAN_IOEND)
_ne_insb(PORT2ADDR_NE(port), addr, count);
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+ else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+ unsigned char *buf = addr;
+ unsigned char *portp = __port2addr_ata(port);
+ while (count--)
+ *buf++ = *(volatile unsigned char *)portp;
+ }
+#endif
#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char),
pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
count, 1);
#endif
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+ } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+ portp = __port2addr_ata(port);
+ while (count--)
+ *buf++ = *(volatile unsigned short *)portp;
+#endif
} else {
portp = PORT2ADDR(port);
while (count--)
portp = PORT2ADDR_NE(port);
while (count--)
_ne_outb(*buf++, portp);
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+ } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+ portp = __port2addr_ata(port);
+ while (count--)
+ *(volatile unsigned char *)portp = *buf++;
+#endif
#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char),
portp = PORT2ADDR_NE(port);
while (count--)
*(volatile unsigned short *)portp = *buf++;
+#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
+ } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
+ portp = __port2addr_ata(port);
+ while (count--)
+ *(volatile unsigned short *)portp = *buf++;
+#endif
#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short),
static struct hw_interrupt_type opsput_lanpld_irq_type =
{
- "OPSPUT-PLD-LAN-IRQ",
- startup_opsput_lanpld_irq,
- shutdown_opsput_lanpld_irq,
- enable_opsput_lanpld_irq,
- disable_opsput_lanpld_irq,
- mask_and_ack_opsput_lanpld,
- end_opsput_lanpld_irq
+ .typename = "OPSPUT-PLD-LAN-IRQ",
+ .startup = startup_opsput_lanpld_irq,
+ .shutdown = shutdown_opsput_lanpld_irq,
+ .enable = enable_opsput_lanpld_irq,
+ .disable = disable_opsput_lanpld_irq,
+ .ack = mask_and_ack_opsput_lanpld,
+ .end = end_opsput_lanpld_irq
};
/*
disable_opsput_pld_irq(PLD_IRQ_SIO0_SND);
#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-#if defined(CONFIG_M32R_CFC)
/* INT#1: CFC IREQ on PLD */
irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_CFIREQ].chip = &opsput_pld_irq_type;
irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */
pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* 'H' edge sense */
disable_opsput_pld_irq(PLD_IRQ_CFC_EJECT);
-#endif /* CONFIG_M32R_CFC */
-
/*
* INT0# is used for LAN, DIO
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
-#if 0
+
if (error_code & ACE_USERMODE) {
/*
* accessing the stack below "spu" is always a bug.
if (address + 4 < regs->spu)
goto bad_area;
}
-#endif
+
if (expand_stack(vma, address))
goto bad_area;
/*
config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_HWEIGHT
bool
default y
void __init stdma_init(void)
{
stdma_isr = NULL;
- request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW,
+ request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | SA_SHIRQ,
"ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int);
}
1: lea init_task,%curptr | get initial thread...
lea init_thread_union+THREAD_SIZE,%sp | ...and its stack.
-/* copy bootinfo records from the loader to _end */
- lea _end, %a1
- lea BI_START, %a0
- /* number of longs to copy */
- movel %a0@, %d0
-1: addl #4, %a0
- movel %a0@, %a1@
- addl #4, %a1
- dbf %d0, 1b
-
/* Point MSP at an invalid page to trap if it's used. --m */
movl #(PAGESIZE),%d0
movc %d0,%msp
jiffies = jiffies_64 + 4;
SECTIONS
{
- . = 0xE004000;
+ . = 0xE002000;
_text = .; /* Text and read-only data */
.text : {
*(.head)
unsigned long addr;
struct vm_struct **p, *tmp, *area;
- area = (struct vm_struct *)kmalloc(sizeof(*area), GFP_KERNEL);
+ area = kmalloc(sizeof(*area), GFP_KERNEL);
if (!area)
return NULL;
addr = KMAP_START;
mach_l2_flush(0);
#endif
}
-EXPORT_SYMBOL(cache_clear); /* probably can be unexported */
+EXPORT_SYMBOL(cache_clear);
/*
mach_l2_flush(1);
#endif
}
-EXPORT_SYMBOL(cache_push); /* probably can be unexported */
+EXPORT_SYMBOL(cache_push);
#ifndef CONFIG_SINGLE_MEMORY_CHUNK
int mm_end_of_chunk (unsigned long addr, int len)
unsigned long zones_size[MAX_NR_ZONES] = { 0, };
unsigned long size;
-
#ifdef TEST_VERIFY_AREA
wp_works_ok = 0;
#endif
/* memory sizing is a hack stolen from motorola.c.. hope it works for us */
zones_size[ZONE_DMA] = ((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
- free_area_init(zones_size);
+ /* I really wish I knew why the following change made things better... -- Sam */
+/* free_area_init(zones_size); */
+ free_area_init_node(0, NODE_DATA(0), zones_size,
+ (__pa(PAGE_OFFSET) >> PAGE_SHIFT) + 1, NULL);
+
}
bool
default n
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_FIND_NEXT_BIT
bool
default y
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
config MACH_DECSTATION
bool "DECstations"
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_100HZ
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
+config PNX8550_STB810
+ bool "Support for Philips PNX8550 based STB810 board"
+ select PNX8550
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
config DDB5477
bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
select SYS_HAS_CPU_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select GENERIC_HARDIRQS_NO__DO_IRQ
config PMC_YOSEMITE
bool "PMC-Sierra Yosemite eval board"
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select ARCH_SPARSEMEM_ENABLE
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
Qemu is a software emulator which among other architectures also
can simulate a MIPS32 4Kc system. This patch adds support for the
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
-config SNI_RM200_PCI
- bool "SNI RM200 PCI"
+config SNI_RM
+ bool "SNI RM200/300/400"
select ARC if CPU_LITTLE_ENDIAN
select ARC32 if CPU_LITTLE_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
help
- The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
- Nixdorf Informationssysteme (SNI), parent company of Pyramid
+ The SNI RM200/300/400 are MIPS-based machines manufactured by
+ Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
Technology and now in turn merged with Fujitsu. Say Y here to
support this machine type.
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select TOSHIBA_BOARDS
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
This Toshiba board is based on the TX4927 processor. Say Y here to
support this machine type
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select TOSHIBA_BOARDS
+ select GENERIC_HARDIRQS_NO__DO_IRQ
help
This Toshiba board is based on the TX4938 processor. Say Y here to
support this machine type
config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_FIND_NEXT_BIT
bool
default y
config ARC_CONSOLE
bool "ARC console support"
- depends on SGI_IP22 || SNI_RM200_PCI
+ depends on SGI_IP22 || SNI_RM
config ARC_MEMORY
bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
+ depends on MACH_JAZZ || SNI_RM || SGI_IP32
default y
config ARC_PROMLIB
bool
- depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
+ depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP32
default y
config ARC64
#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550
load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
+# Philips PNX8550 STB810 board
+#
+libs-$(CONFIG_PNX8550_STB810) += arch/mips/philips/pnx8550/stb810/
+load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000
+
# NEC EMMA2RH boards
#
core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/
load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
-# SNI RM200 PCI
+# SNI RM
#
-core-$(CONFIG_SNI_RM200_PCI) += arch/mips/sni/
-cflags-$(CONFIG_SNI_RM200_PCI) += -Iinclude/asm-mips/mach-rm200
-load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000
+core-$(CONFIG_SNI_RM) += arch/mips/sni/
+cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm
+load-$(CONFIG_SNI_RM) += 0xffffffff80600000
#
# Toshiba JMR-TX3927 board
all: vmlinux.bin
endif
-ifdef CONFIG_SNI_RM200_PCI
+ifdef CONFIG_SNI_RM
all: vmlinux.ecoff
endif
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
CONFIG_TOSHIBA_JMR3927=y
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
#
# Memory Technology Devices (MTD)
#
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19
+# Thu Dec 7 16:35:12 2006
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+CONFIG_PNX8550_STB810=y
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_KEXEC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_PNX8550=y
+CONFIG_SOC_PNX8550=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=m
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_OFFBOARD=y
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+CONFIG_NATSEMI=y
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PNX8XXX is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+CONFIG_HEADERS_CHECK=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_MIPS_UNCACHED is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_PLIST=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_TOSHIBA_RBTX4938=y
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-CONFIG_SNI_RM200_PCI=y
+CONFIG_SNI_RM=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
{
struct apm_user *as;
- as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL);
+ as = kzalloc(sizeof(*as), GFP_KERNEL);
if (as) {
/*
* XXX - this is a tiny bit broken, when we consider BSD
EXPORT(stext) # used for profiling
EXPORT(_stext)
-#if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM)
+#ifdef CONFIG_MIPS_SIM
/*
* Give us a fighting chance of running if execution beings at the
* kernel load address. This is needed because this platform does
psinfo.pr_pid = prstatus.pr_pid = current->pid;
psinfo.pr_ppid = prstatus.pr_ppid = current->parent->pid;
psinfo.pr_pgrp = prstatus.pr_pgrp = process_group(current);
- psinfo.pr_sid = prstatus.pr_sid = current->signal->session;
+ psinfo.pr_sid = prstatus.pr_sid = process_session(current);
if (current->pid == current->tgid) {
/*
* This is the record for the group leader. Add in the
for (;;) {
unsigned long set;
i = j * __NFDBITS;
- if (i >= fdt->max_fdset || i >= fdt->max_fds)
+ if (i >= fdt->max_fds)
break;
set = fdt->open_fds->fds_bits[j++];
while (set) {
void (*_machine_halt)(void);
void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
void machine_restart(char *command)
{
if (_machine_restart)
int minor;
unsigned int mask = 0;
- minor = iminor(file->f_dentry->d_inode);
+ minor = iminor(file->f_path.dentry->d_inode);
poll_wait(file, &channel_wqs[minor].rt_queue, wait);
poll_wait(file, &channel_wqs[minor].lx_queue, wait);
static ssize_t file_read(struct file *file, char __user * buffer, size_t count,
loff_t * ppos)
{
- int minor = iminor(file->f_dentry->d_inode);
+ int minor = iminor(file->f_path.dentry->d_inode);
/* data available? */
if (!rtlx_read_poll(minor, (file->f_flags & O_NONBLOCK) ? 0 : 1)) {
struct rtlx_channel *rt;
DECLARE_WAITQUEUE(wait, current);
- minor = iminor(file->f_dentry->d_inode);
+ minor = iminor(file->f_path.dentry->d_inode);
rt = &rtlx->channel[minor];
/* any space left... */
goto out;
}
- error = vfs_statfs(file->f_dentry, &kbuf);
+ error = vfs_statfs(file->f_path.dentry, &kbuf);
if (error)
goto out_f;
unsigned long old_pos;
long max_size = offset + len;
- if (max_size > file->f_dentry->d_inode->i_size) {
+ if (max_size > file->f_path.dentry->d_inode->i_size) {
old_pos = sys_lseek (fd, max_size - 1, 0);
sys_write (fd, (void __user *) "", 1);
sys_lseek (fd, old_pos, 0);
error = -EBADF;
goto out;
}
- error = vfs_statfs(file->f_dentry, &kbuf);
+ error = vfs_statfs(file->f_path.dentry, &kbuf);
if (error)
goto out_f;
unsigned long old_pos;
long max_size = off2 + len;
- if (max_size > file->f_dentry->d_inode->i_size) {
+ if (max_size > file->f_path.dentry->d_inode->i_size) {
old_pos = sys_lseek (fd, max_size - 1, 0);
sys_write (fd, (void __user *) "", 1);
sys_lseek (fd, old_pos, 0);
error = -EBADF;
goto out;
}
- error = vfs_statfs(file->f_dentry, &kbuf);
+ error = vfs_statfs(file->f_path.dentry, &kbuf);
if (error)
goto out_f;
/* .exit.text is discarded at runtime, not link time, to deal with
references from .rodata */
.exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
. = ALIGN(_PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
/* Sections to be discarded */
/DISCARD/ : {
- *(.exit.data)
*(.exitcall.exit)
/* ABI crap starts here */
size_t ret = count;
struct vpe *v;
- minor = iminor(file->f_dentry->d_inode);
+ minor = iminor(file->f_path.dentry->d_inode);
if ((v = get_vpe(minor)) == NULL)
return -ENODEV;
/* Strategy function to write EEPROM after changing string entry */
int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
- void *newval, size_t newlen, void **context)
+ void *newval, size_t newlen)
{
int r;
mutex_lock(&lasat_info_mutex);
r = sysctl_string(table, name,
- nlen, oldval, oldlenp, newval, newlen, context);
+ nlen, oldval, oldlenp, newval, newlen);
if (r < 0) {
mutex_unlock(&lasat_info_mutex);
return r;
/* Sysctl for setting the IP addresses */
int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
- void *newval, size_t newlen, void **context)
+ void *newval, size_t newlen)
{
int r;
mutex_lock(&lasat_info_mutex);
- r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen, context);
+ r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
if (r < 0) {
mutex_unlock(&lasat_info_mutex);
return r;
/* Same for RTC */
int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
- void *newval, size_t newlen, void **context)
+ void *newval, size_t newlen)
{
int r;
mutex_lock(&lasat_info_mutex);
rtctmp = ds1603_read();
if (rtctmp < 0)
rtctmp = 0;
- r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen, context);
+ r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
if (r < 0) {
mutex_unlock(&lasat_info_mutex);
return r;
static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
- void *newval, size_t newlen,
- void **context)
+ void *newval, size_t newlen)
{
int r;
mutex_lock(&lasat_info_mutex);
- r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen, context);
+ r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
if (r < 0) {
mutex_unlock(&lasat_info_mutex);
return r;
mutex_unlock(&lasat_info_mutex);
return r;
}
- if (filp && filp->f_dentry)
+ if (filp && filp->f_path.dentry)
{
- if (!strcmp(filp->f_dentry->d_name.name, "prid"))
+ if (!strcmp(filp->f_path.dentry->d_name.name, "prid"))
lasat_board_info.li_eeprom_info.prid = lasat_board_info.li_prid;
- if (!strcmp(filp->f_dentry->d_name.name, "debugaccess"))
+ if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess"))
lasat_board_info.li_eeprom_info.debugaccess = lasat_board_info.li_debugaccess;
}
lasat_write_eeprom_info();
#include <asm/regdef.h>
#ifdef CONFIG_64BIT
-#define T0 ta0
-#define T1 ta1
-#define T2 ta2
-#define T3 ta3
-#define T4 t0
-#define T7 t3
-#else
-#define T0 t0
-#define T1 t1
-#define T2 t2
-#define T3 t3
-#define T4 t4
-#define T7 t7
+/*
+ * As we are sharing code base with the mips32 tree (which use the o32 ABI
+ * register definitions). We need to redefine the register definitions from
+ * the n64 ABI register naming to the o32 ABI register naming.
+ */
+#undef t0
+#undef t1
+#undef t2
+#undef t3
+#define t0 $8
+#define t1 $9
+#define t2 $10
+#define t3 $11
+#define t4 $12
+#define t5 $13
+#define t6 $14
+#define t7 $15
+
+#define USE_DOUBLE
#endif
+#ifdef USE_DOUBLE
+
+#define LOAD ld
+#define ADD daddu
+#define NBYTES 8
+
+#else
+
+#define LOAD lw
+#define ADD addu
+#define NBYTES 4
+
+#endif /* USE_DOUBLE */
+
+#define UNIT(unit) ((unit)*NBYTES)
+
#define ADDC(sum,reg) \
- addu sum, reg; \
+ ADD sum, reg; \
sltu v1, sum, reg; \
- addu sum, v1
+ ADD sum, v1
-#define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \
- lw _t0, (offset + 0x00)(src); \
- lw _t1, (offset + 0x04)(src); \
- lw _t2, (offset + 0x08)(src); \
- lw _t3, (offset + 0x0c)(src); \
- ADDC(sum, _t0); \
- ADDC(sum, _t1); \
- ADDC(sum, _t2); \
- ADDC(sum, _t3); \
- lw _t0, (offset + 0x10)(src); \
- lw _t1, (offset + 0x14)(src); \
- lw _t2, (offset + 0x18)(src); \
- lw _t3, (offset + 0x1c)(src); \
+#define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \
+ LOAD _t0, (offset + UNIT(0))(src); \
+ LOAD _t1, (offset + UNIT(1))(src); \
+ LOAD _t2, (offset + UNIT(2))(src); \
+ LOAD _t3, (offset + UNIT(3))(src); \
ADDC(sum, _t0); \
ADDC(sum, _t1); \
ADDC(sum, _t2); \
- ADDC(sum, _t3); \
+ ADDC(sum, _t3)
+
+#ifdef USE_DOUBLE
+#define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \
+ CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)
+#else
+#define CSUM_BIGCHUNK(src, offset, sum, _t0, _t1, _t2, _t3) \
+ CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3); \
+ CSUM_BIGCHUNK1(src, offset + 0x10, sum, _t0, _t1, _t2, _t3)
+#endif
/*
* a0: source address
.text
.set noreorder
-
-/* unknown src alignment and < 8 bytes to go */
-small_csumcpy:
- move a1, T2
-
- andi T0, a1, 4
- beqz T0, 1f
- andi T0, a1, 2
-
- /* Still a full word to go */
- ulw T1, (src)
- PTR_ADDIU src, 4
- ADDC(sum, T1)
-
-1: move T1, zero
- beqz T0, 1f
- andi T0, a1, 1
-
- /* Still a halfword to go */
- ulhu T1, (src)
- PTR_ADDIU src, 2
-
-1: beqz T0, 1f
- sll T1, T1, 16
-
- lbu T2, (src)
- nop
-
-#ifdef __MIPSEB__
- sll T2, T2, 8
-#endif
- or T1, T2
-
-1: ADDC(sum, T1)
-
- /* fold checksum */
- sll v1, sum, 16
- addu sum, v1
- sltu v1, sum, v1
- srl sum, sum, 16
- addu sum, v1
-
- /* odd buffer alignment? */
- beqz T7, 1f
- nop
- sll v1, sum, 8
- srl sum, sum, 8
- or sum, v1
- andi sum, 0xffff
-1:
- .set reorder
- /* Add the passed partial csum. */
- ADDC(sum, a2)
- jr ra
- .set noreorder
-
-/* ------------------------------------------------------------------------- */
-
.align 5
LEAF(csum_partial)
move sum, zero
- move T7, zero
+ move t7, zero
sltiu t8, a1, 0x8
bnez t8, small_csumcpy /* < 8 bytes to copy */
- move T2, a1
+ move t2, a1
- beqz a1, out
- andi T7, src, 0x1 /* odd buffer? */
+ andi t7, src, 0x1 /* odd buffer? */
hword_align:
- beqz T7, word_align
+ beqz t7, word_align
andi t8, src, 0x2
- lbu T0, (src)
+ lbu t0, (src)
LONG_SUBU a1, a1, 0x1
#ifdef __MIPSEL__
- sll T0, T0, 8
+ sll t0, t0, 8
#endif
- ADDC(sum, T0)
+ ADDC(sum, t0)
PTR_ADDU src, src, 0x1
andi t8, src, 0x2
beqz t8, dword_align
sltiu t8, a1, 56
- lhu T0, (src)
+ lhu t0, (src)
LONG_SUBU a1, a1, 0x2
- ADDC(sum, T0)
+ ADDC(sum, t0)
sltiu t8, a1, 56
PTR_ADDU src, src, 0x2
beqz t8, qword_align
andi t8, src, 0x8
- lw T0, 0x00(src)
+ lw t0, 0x00(src)
LONG_SUBU a1, a1, 0x4
- ADDC(sum, T0)
+ ADDC(sum, t0)
PTR_ADDU src, src, 0x4
andi t8, src, 0x8
beqz t8, oword_align
andi t8, src, 0x10
- lw T0, 0x00(src)
- lw T1, 0x04(src)
+#ifdef USE_DOUBLE
+ ld t0, 0x00(src)
+ LONG_SUBU a1, a1, 0x8
+ ADDC(sum, t0)
+#else
+ lw t0, 0x00(src)
+ lw t1, 0x04(src)
LONG_SUBU a1, a1, 0x8
- ADDC(sum, T0)
- ADDC(sum, T1)
+ ADDC(sum, t0)
+ ADDC(sum, t1)
+#endif
PTR_ADDU src, src, 0x8
andi t8, src, 0x10
beqz t8, begin_movement
LONG_SRL t8, a1, 0x7
- lw T3, 0x08(src)
- lw T4, 0x0c(src)
- lw T0, 0x00(src)
- lw T1, 0x04(src)
- ADDC(sum, T3)
- ADDC(sum, T4)
- ADDC(sum, T0)
- ADDC(sum, T1)
+#ifdef USE_DOUBLE
+ ld t0, 0x00(src)
+ ld t1, 0x08(src)
+ ADDC(sum, t0)
+ ADDC(sum, t1)
+#else
+ CSUM_BIGCHUNK1(src, 0x00, sum, t0, t1, t3, t4)
+#endif
LONG_SUBU a1, a1, 0x10
PTR_ADDU src, src, 0x10
LONG_SRL t8, a1, 0x7
begin_movement:
beqz t8, 1f
- andi T2, a1, 0x40
+ andi t2, a1, 0x40
move_128bytes:
- CSUM_BIGCHUNK(src, 0x00, sum, T0, T1, T3, T4)
- CSUM_BIGCHUNK(src, 0x20, sum, T0, T1, T3, T4)
- CSUM_BIGCHUNK(src, 0x40, sum, T0, T1, T3, T4)
- CSUM_BIGCHUNK(src, 0x60, sum, T0, T1, T3, T4)
+ CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
+ CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4)
+ CSUM_BIGCHUNK(src, 0x40, sum, t0, t1, t3, t4)
+ CSUM_BIGCHUNK(src, 0x60, sum, t0, t1, t3, t4)
LONG_SUBU t8, t8, 0x01
bnez t8, move_128bytes
PTR_ADDU src, src, 0x80
1:
- beqz T2, 1f
- andi T2, a1, 0x20
+ beqz t2, 1f
+ andi t2, a1, 0x20
move_64bytes:
- CSUM_BIGCHUNK(src, 0x00, sum, T0, T1, T3, T4)
- CSUM_BIGCHUNK(src, 0x20, sum, T0, T1, T3, T4)
+ CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
+ CSUM_BIGCHUNK(src, 0x20, sum, t0, t1, t3, t4)
PTR_ADDU src, src, 0x40
1:
- beqz T2, do_end_words
+ beqz t2, do_end_words
andi t8, a1, 0x1c
move_32bytes:
- CSUM_BIGCHUNK(src, 0x00, sum, T0, T1, T3, T4)
+ CSUM_BIGCHUNK(src, 0x00, sum, t0, t1, t3, t4)
andi t8, a1, 0x1c
PTR_ADDU src, src, 0x20
do_end_words:
- beqz t8, maybe_end_cruft
- LONG_SRL t8, t8, 0x2
+ beqz t8, small_csumcpy
+ andi t2, a1, 0x3
+ LONG_SRL t8, t8, 0x2
end_words:
- lw T0, (src)
+ lw t0, (src)
LONG_SUBU t8, t8, 0x1
- ADDC(sum, T0)
+ ADDC(sum, t0)
bnez t8, end_words
PTR_ADDU src, src, 0x4
-maybe_end_cruft:
- andi T2, a1, 0x3
+/* unknown src alignment and < 8 bytes to go */
+small_csumcpy:
+ move a1, t2
-small_memcpy:
- j small_csumcpy; move a1, T2 /* XXX ??? */
- beqz t2, out
- move a1, T2
+ andi t0, a1, 4
+ beqz t0, 1f
+ andi t0, a1, 2
-end_bytes:
- lb T0, (src)
- LONG_SUBU a1, a1, 0x1
- bnez a2, end_bytes
- PTR_ADDU src, src, 0x1
+ /* Still a full word to go */
+ ulw t1, (src)
+ PTR_ADDIU src, 4
+ ADDC(sum, t1)
+
+1: move t1, zero
+ beqz t0, 1f
+ andi t0, a1, 1
+
+ /* Still a halfword to go */
+ ulhu t1, (src)
+ PTR_ADDIU src, 2
+
+1: beqz t0, 1f
+ sll t1, t1, 16
+
+ lbu t2, (src)
+ nop
-out:
+#ifdef __MIPSEB__
+ sll t2, t2, 8
+#endif
+ or t1, t2
+
+1: ADDC(sum, t1)
+
+ /* fold checksum */
+#ifdef USE_DOUBLE
+ dsll32 v1, sum, 0
+ daddu sum, v1
+ sltu v1, sum, v1
+ dsra32 sum, sum, 0
+ addu sum, v1
+#endif
+ sll v1, sum, 16
+ addu sum, v1
+ sltu v1, sum, v1
+ srl sum, sum, 16
+ addu sum, v1
+
+ /* odd buffer alignment? */
+ beqz t7, 1f
+ nop
+ sll v1, sum, 8
+ srl sum, sum, 8
+ or sum, v1
+ andi sum, 0xffff
+1:
+ .set reorder
+ /* Add the passed partial csum. */
+ ADDC(sum, a2)
jr ra
- move v0, sum
+ .set noreorder
END(csum_partial)
* Copyright (C) 1998, 1999 Ralf Baechle
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/types.h>
#include <asm/byteorder.h>
#include <asm/string.h>
return sum;
}
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+
/*
* Copy from userspace and compute checksum. If we catch an exception
* then zero the rest of the buffer.
# under Linux.
#
-obj-y := malta_int.o malta_setup.o
+obj-y := malta_int.o malta_mtd.o malta_setup.o
obj-$(CONFIG_SMP) += malta_smp.o
#include <linux/pci.h>
#include <linux/screen_info.h>
-#ifdef CONFIG_MTD
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#endif
-
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
{ .name = "dma2", .start = 0xc0, .end = 0xdf, .flags = IORESOURCE_BUSY },
};
-#ifdef CONFIG_MTD
-static struct mtd_partition malta_mtd_partitions[] = {
- {
- .name = "YAMON",
- .offset = 0x0,
- .size = 0x100000,
- .mask_flags = MTD_WRITEABLE
- },
- {
- .name = "User FS",
- .offset = 0x100000,
- .size = 0x2e0000
- },
- {
- .name = "Board Config",
- .offset = 0x3e0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE
- }
-};
-
-#define number_partitions (sizeof(malta_mtd_partitions)/sizeof(struct mtd_partition))
-#endif
-
const char *get_system_type(void)
{
return "MIPS Malta";
#endif
#endif
-#ifdef CONFIG_MTD
- /*
- * Support for MTD on Malta. Use the generic physmap driver
- */
- physmap_configure(0x1e000000, 0x400000, 4, NULL);
- physmap_set_partitions(malta_mtd_partitions, number_partitions);
-#endif
-
mips_reboot_setup();
board_time_init = mips_time_init;
void (*flush_data_cache_page)(unsigned long addr);
void (*flush_icache_all)(void);
+EXPORT_SYMBOL_GPL(local_flush_data_cache_page);
EXPORT_SYMBOL(flush_data_cache_page);
#ifdef CONFIG_DMA_NONCOHERENT
preempt_check_resched();
}
+void copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr, struct vm_area_struct *vma)
+{
+ void *vfrom, *vto;
+
+ vto = kmap_atomic(to, KM_USER1);
+ if (cpu_has_dc_aliases) {
+ vfrom = kmap_coherent(from, vaddr);
+ copy_page(vto, vfrom);
+ kunmap_coherent(from);
+ } else {
+ vfrom = kmap_atomic(from, KM_USER0);
+ copy_page(vto, vfrom);
+ kunmap_atomic(vfrom, KM_USER0);
+ }
+ if (((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc) ||
+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ flush_data_cache_page((unsigned long)vto);
+ kunmap_atomic(vto, KM_USER1);
+ /* Make sure this page is cleared on other CPU's too before using it */
+ smp_wmb();
+}
+
+EXPORT_SYMBOL(copy_user_highpage);
+
void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES] = { 0, };
- unsigned long max_dma, high, low;
+ unsigned long max_dma, low;
#ifndef CONFIG_FLATMEM
unsigned long zholes_size[MAX_NR_ZONES] = { 0, };
unsigned long i, j, pfn;
max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
low = max_low_pfn;
- high = highend_pfn;
#ifdef CONFIG_ISA
if (low < max_dma)
zones_size[ZONE_DMA] = low;
#endif
#ifdef CONFIG_HIGHMEM
- if (cpu_has_dc_aliases) {
- printk(KERN_WARNING "This processor doesn't support highmem.");
- if (high - low)
- printk(" %ldk highmem ignored", high - low);
- printk("\n");
- } else
- zones_size[ZONE_HIGHMEM] = high - low;
+ zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn;
+
+ if (cpu_has_dc_aliases && zones_size[ZONE_HIGHMEM]) {
+ printk(KERN_WARNING "This processor doesn't support highmem."
+ " %ldk highmem ignored\n", zones_size[ZONE_HIGHMEM]);
+ zones_size[ZONE_HIGHMEM] = 0;
+ }
#endif
#ifdef CONFIG_FLATMEM
* (C) Copyright 1995 1996 Linus Torvalds
* (C) Copyright 2001, 2002 Ralf Baechle
*/
+#include <linux/mm.h>
#include <linux/module.h>
#include <asm/addrspace.h>
#include <asm/byteorder.h>
#include <linux/vmalloc.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-#include <asm/tlbflush.h>
-
-static inline void remap_area_pte(pte_t * pte, unsigned long address,
- phys_t size, phys_t phys_addr, unsigned long flags)
-{
- phys_t end;
- unsigned long pfn;
- pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE
- | __WRITEABLE | flags);
-
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- if (address >= end)
- BUG();
- pfn = phys_addr >> PAGE_SHIFT;
- do {
- if (!pte_none(*pte)) {
- printk("remap_area_pte: page already exists\n");
- BUG();
- }
- set_pte(pte, pfn_pte(pfn, pgprot));
- address += PAGE_SIZE;
- pfn++;
- pte++;
- } while (address && (address < end));
-}
-
-static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
- phys_t size, phys_t phys_addr, unsigned long flags)
-{
- phys_t end;
-
- address &= ~PGDIR_MASK;
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
- phys_addr -= address;
- if (address >= end)
- BUG();
- do {
- pte_t * pte = pte_alloc_kernel(pmd, address);
- if (!pte)
- return -ENOMEM;
- remap_area_pte(pte, address, end - address, address + phys_addr, flags);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address && (address < end));
- return 0;
-}
-
-static int remap_area_pages(unsigned long address, phys_t phys_addr,
- phys_t size, unsigned long flags)
-{
- int error;
- pgd_t * dir;
- unsigned long end = address + size;
-
- phys_addr -= address;
- dir = pgd_offset(&init_mm, address);
- flush_cache_all();
- if (address >= end)
- BUG();
- do {
- pud_t *pud;
- pmd_t *pmd;
-
- error = -ENOMEM;
- pud = pud_alloc(&init_mm, dir, address);
- if (!pud)
- break;
- pmd = pmd_alloc(&init_mm, pud, address);
- if (!pmd)
- break;
- if (remap_area_pmd(pmd, address, end - address,
- phys_addr + address, flags))
- break;
- error = 0;
- address = (address + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- } while (address && (address < end));
- flush_tlb_all();
- return error;
-}
+#include <linux/io.h>
/*
* Generic mapping function (not visible outside):
unsigned long offset;
phys_t last_addr;
void * addr;
+ pgprot_t pgprot;
phys_addr = fixup_bigphys_addr(phys_addr, size);
return NULL;
}
+ pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE
+ | __WRITEABLE | flags);
+
/*
* Mappings have to be page-aligned
*/
if (!area)
return NULL;
addr = area->addr;
- if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
+ if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
+ phys_addr, pgprot)) {
vunmap(addr);
return NULL;
}
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
-obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
+obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
#define DBG(x...)
#endif
-extern char irq_tab_jbs[][5];
+extern char pnx8550_irq_tab[][5];
void __init pcibios_fixup_resources(struct pci_dev *dev)
{
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
- return irq_tab_jbs[slot][pin];
+ return pnx8550_irq_tab[slot][pin];
}
/* Do platform specific device initialization at pci_enable_device() time */
return &(arcs_cmdline[0]);
}
-void prom_init_cmdline(void)
+void __init prom_init_cmdline(void)
{
- char *cp;
- int actr;
-
- actr = 1; /* Always ignore argv[0] */
+ int i;
- cp = &(arcs_cmdline[0]);
- while(actr < prom_argc) {
- strcpy(cp, prom_argv[actr]);
- cp += strlen(prom_argv[actr]);
- *cp++ = ' ';
- actr++;
+ arcs_cmdline[0] = '\0';
+ for (i = 0; i < prom_argc; i++) {
+ strcat(arcs_cmdline, prom_argv[i]);
+ strcat(arcs_cmdline, " ");
}
- if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
- --cp;
- *cp = '\0';
}
char *prom_getenv(char *envname)
#include <linux/init.h>
#include <int.h>
-char irq_tab_jbs[][5] __initdata = {
- [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
- [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
- [17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+char pnx8550_irq_tab[][5] __initdata = {
+ [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
};
--- /dev/null
+
+# Makefile for the Philips STB810 Board.
+
+lib-y := prom_init.o board_setup.o irqmap.o
--- /dev/null
+/*
+ * STB810 specific board startup routines.
+ *
+ * Based on the arch/mips/philips/pnx8550/jbs/board_setup.c
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+
+#include <glb.h>
+
+void __init board_setup(void)
+{
+ unsigned long config0, configpr;
+
+ config0 = read_c0_config();
+
+ /* clear all three cache coherency fields */
+ config0 &= ~(0x7 | (7<<25) | (7<<28));
+ config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
+ (CONF_CM_DEFAULT<<28));
+ write_c0_config(config0);
+
+ configpr = read_c0_config7();
+ configpr |= (1<<19); /* enable tlb */
+ write_c0_config7(configpr);
+}
--- /dev/null
+/*
+ * Philips STB810 board irqmap.
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <int.h>
+
+char pnx8550_irq_tab[][5] __initdata = {
+ [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [10] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+};
+
--- /dev/null
+/*
+ * STB810 specific prom routines
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+ return "Philips PNX8550/STB810";
+}
+
+void __init prom_init(void)
+{
+ unsigned long memsize;
+
+ prom_argc = (int) fw_arg0;
+ prom_argv = (char **) fw_arg1;
+ prom_envp = (char **) fw_arg2;
+
+ prom_init_cmdline();
+
+ mips_machgroup = MACH_GROUP_PHILIPS;
+ mips_machtype = MACH_PHILIPS_STB810;
+
+ memsize = 0x08000000; /* Trimedia uses memory above */
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
#define TOSHIBA_RBTX4927_IRQ_ISA_ENABLE ( 1 << 23 )
#define TOSHIBA_RBTX4927_IRQ_ISA_DISABLE ( 1 << 24 )
#define TOSHIBA_RBTX4927_IRQ_ISA_MASK ( 1 << 25 )
-#define TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ ( 1 << 26 )
#define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff
#endif
// | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE
// | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE
// | TOSHIBA_RBTX4927_IRQ_ISA_MASK
-// | TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ
);
#endif
static void toshiba_rbtx4927_irq_isa_enable(unsigned int irq);
static void toshiba_rbtx4927_irq_isa_disable(unsigned int irq);
static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq);
-static void toshiba_rbtx4927_irq_isa_end(unsigned int irq);
#endif
#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
.mask = toshiba_rbtx4927_irq_isa_disable,
.mask_ack = toshiba_rbtx4927_irq_isa_mask_and_ack,
.unmask = toshiba_rbtx4927_irq_isa_enable,
- .end = toshiba_rbtx4927_irq_isa_end,
};
#endif
for (i = TOSHIBA_RBTX4927_IRQ_ISA_BEG;
i <= TOSHIBA_RBTX4927_IRQ_ISA_END; i++)
- set_irq_chip(i, &toshiba_rbtx4927_irq_isa_type);
+ set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_isa_type,
+ handle_level_irq);
setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC,
&toshiba_rbtx4927_irq_isa_master);
#endif
-#ifdef CONFIG_TOSHIBA_FPCIB0
-static void toshiba_rbtx4927_irq_isa_end(unsigned int irq)
-{
- TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ,
- "irq=%d\n", irq);
-
- if (irq < TOSHIBA_RBTX4927_IRQ_ISA_BEG
- || irq > TOSHIBA_RBTX4927_IRQ_ISA_END) {
- TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
- "bad irq=%d\n", irq);
- panic("\n");
- }
-
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
- toshiba_rbtx4927_irq_isa_enable(irq);
- }
-}
-#endif
-
-
void __init arch_init_irq(void)
{
extern void tx4927_irq_init(void);
select ISA
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config IBM_WORKPAD
bool "Support for IBM WorkPad z50"
select ISA
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config NEC_CMBVR4133
bool "Support for NEC CMB-VR4133"
select IRQ_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
help
The TANBAC VR4131 multichip module(TB0225) and
the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
select IRQ_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config ZAO_CAPCELLA
bool "Support for ZAO Networks Capcella"
select IRQ_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config PCI_VR41XX
bool "Add PCI control unit support of NEC VR4100 series"
mask_and_ack_8259A(irq - I8259_IRQ_BASE);
}
-static void end_i8259_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_8259A_irq(irq - I8259_IRQ_BASE);
-}
-
static struct irq_chip i8259_irq_type = {
.typename = "XT-PIC",
.ack = ack_i8259_irq,
.mask = disable_i8259_irq,
.mask_ack = ack_i8259_irq,
.unmask = enable_i8259_irq,
- .end = end_i8259_irq,
};
static int i8259_get_irq_number(int irq)
}
for (i = I8259_IRQ_BASE; i <= I8259_IRQ_LAST; i++)
- set_irq_chip(i, &i8259_irq_type);
+ set_irq_chip_and_handler(i, &i8259_irq_type, handle_level_irq);
setup_irq(I8259_SLAVE_IRQ, &i8259_slave_cascade);
config RWSEM_XCHGADD_ALGORITHM
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_FIND_NEXT_BIT
bool
default y
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs_hpux(file->f_dentry, &tmp);
+ error = vfs_statfs_hpux(file->f_path.dentry, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);
printk(KERN_DEBUG "len of arg1 = %d\n", len);
if (len == 0)
return 0;
- fsname = (char *) kmalloc(len, GFP_KERNEL);
+ fsname = kmalloc(len, GFP_KERNEL);
if ( !fsname ) {
printk(KERN_DEBUG "failed to kmalloc fsname\n");
return 0;
struct pt_regs *r = &t->thread.regs;
struct pt_regs *r2;
- r2 = (struct pt_regs *)kmalloc(sizeof(struct pt_regs), GFP_KERNEL);
+ r2 = kmalloc(sizeof(struct pt_regs), GFP_KERNEL);
if (!r2)
return;
*r2 = *r;
#include <linux/vmalloc.h>
#include <linux/errno.h>
#include <linux/module.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-
-static inline void
-remap_area_pte(pte_t *pte, unsigned long address, unsigned long size,
- unsigned long phys_addr, unsigned long flags)
-{
- unsigned long end, pfn;
- pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY |
- _PAGE_ACCESSED | flags);
-
- address &= ~PMD_MASK;
-
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
-
- BUG_ON(address >= end);
-
- pfn = phys_addr >> PAGE_SHIFT;
- do {
- BUG_ON(!pte_none(*pte));
-
- set_pte(pte, pfn_pte(pfn, pgprot));
-
- address += PAGE_SIZE;
- pfn++;
- pte++;
- } while (address && (address < end));
-}
-
-static inline int
-remap_area_pmd(pmd_t *pmd, unsigned long address, unsigned long size,
- unsigned long phys_addr, unsigned long flags)
-{
- unsigned long end;
-
- address &= ~PGDIR_MASK;
-
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
-
- BUG_ON(address >= end);
-
- phys_addr -= address;
- do {
- pte_t *pte = pte_alloc_kernel(pmd, address);
- if (!pte)
- return -ENOMEM;
-
- remap_area_pte(pte, address, end - address,
- address + phys_addr, flags);
-
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address && (address < end));
-
- return 0;
-}
-
-static int
-remap_area_pages(unsigned long address, unsigned long phys_addr,
- unsigned long size, unsigned long flags)
-{
- pgd_t *dir;
- int error = 0;
- unsigned long end = address + size;
-
- BUG_ON(address >= end);
-
- phys_addr -= address;
- dir = pgd_offset_k(address);
-
- flush_cache_all();
-
- do {
- pud_t *pud;
- pmd_t *pmd;
-
- error = -ENOMEM;
- pud = pud_alloc(&init_mm, dir, address);
- if (!pud)
- break;
-
- pmd = pmd_alloc(&init_mm, pud, address);
- if (!pmd)
- break;
-
- if (remap_area_pmd(pmd, address, end - address,
- phys_addr + address, flags))
- break;
-
- error = 0;
- address = (address + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- } while (address && (address < end));
-
- flush_tlb_all();
-
- return error;
-}
/*
* Generic mapping function (not visible outside):
void *addr;
struct vm_struct *area;
unsigned long offset, last_addr;
+ pgprot_t pgprot;
#ifdef CONFIG_EISA
unsigned long end = phys_addr + size - 1;
}
}
+ pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY |
+ _PAGE_ACCESSED | flags);
+
/*
* Mappings have to be page-aligned
*/
return NULL;
addr = area->addr;
- if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
+ if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
+ phys_addr, pgprot)) {
vfree(addr);
return NULL;
}
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default y
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default y if 64BIT
+
config GENERIC_HWEIGHT
bool
default y
bool
default y
+config GENERIC_BUG
+ bool
+ default y
+ depends on BUG
+
config DEFAULT_UIMAGE
bool
help
select PPC_UDBG_16550
select PPC_970_NAP
select PPC_NATIVE
+ select PPC_RTAS
default n
help
This option enables support for the Maple 970FX Evaluation Board.
config MATH_EMULATION
bool "Math emulation"
- depends on 4xx || 8xx || E200 || E500
+ depends on 4xx || 8xx || E200 || PPC_83xx || E500
---help---
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
CONFIG_PS3_HTAB_SIZE=20
CONFIG_PS3_DYNAMIC_DMA=y
CONFIG_PS3_USE_LPAR_ADDR=y
+CONFIG_PS3_VUART=y
#
# Kernel options
ifeq ($(CONFIG_PPC_ISERIES),y)
extra-y += lparmap.s
+$(obj)/head_64.o: $(obj)/lparmap.s
AFLAGS_head_64.o += -I$(obj)
endif
.pvr_mask = 0x7fff0000,
.pvr_value = 0x00840000,
.cpu_name = "e300c2",
- .cpu_features = CPU_FTRS_E300,
+ .cpu_features = CPU_FTRS_E300C2,
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
.icache_bsize = 32,
.dcache_bsize = 32,
.pvr_mask = 0xff000fff,
.pvr_value = 0x53000890,
.cpu_name = "440SPe Rev. A",
- .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
- CPU_FTR_USE_TB,
+ .cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
.icache_bsize = 32,
.dcache_bsize = 32,
/* Floating-point unavailable */
. = 0x800
FPUnavailable:
+BEGIN_FTR_SECTION
+/*
+ * Certain Freescale cores don't have a FPU and treat fp instructions
+ * as a FP Unavailable exception. Redirect to illegal/emulation handling.
+ */
+ b ProgramCheck
+END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
EXCEPTION_PROLOG
bne load_up_fpu /* if from user, just load it up */
addi r3,r1,STACK_FRAME_OVERHEAD
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/cache.h>
+#include <linux/bug.h>
#include "setup.h"
struct module *me)
{
const Elf_Shdr *sect;
+ int err;
- me->arch.bug_table = NULL;
- me->arch.num_bugs = 0;
-
- /* Find the __bug_table section, if present */
- sect = find_section(hdr, sechdrs, "__bug_table");
- if (sect != NULL) {
- me->arch.bug_table = (void *) sect->sh_addr;
- me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry);
- }
-
- /*
- * Strictly speaking this should have a spinlock to protect against
- * traversals, but since we only traverse on BUG()s, a spinlock
- * could potentially lead to deadlock and thus be counter-productive.
- */
- list_add(&me->arch.bug_list, &module_bug_list);
+ err = module_bug_finalize(hdr, sechdrs, me);
+ if (err) /* never true, currently */
+ return err;
/* Apply feature fixups */
sect = find_section(hdr, sechdrs, "__ftr_fixup");
void module_arch_cleanup(struct module *mod)
{
- list_del(&mod->arch.bug_list);
+ module_bug_cleanup(mod);
}
struct bug_entry *module_find_bug(unsigned long bugaddr)
#include <linux/moduleloader.h>
#include <linux/err.h>
#include <linux/vmalloc.h>
+#include <linux/bug.h>
#include <asm/module.h>
#include <asm/uaccess.h>
#include <asm/firmware.h>
const Elf_Shdr *sechdrs, struct module *me)
{
const Elf_Shdr *sect;
+ int err;
- me->arch.bug_table = NULL;
- me->arch.num_bugs = 0;
-
- /* Find the __bug_table section, if present */
- sect = find_section(hdr, sechdrs, "__bug_table");
- if (sect != NULL) {
- me->arch.bug_table = (void *) sect->sh_addr;
- me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry);
- }
-
- /*
- * Strictly speaking this should have a spinlock to protect against
- * traversals, but since we only traverse on BUG()s, a spinlock
- * could potentially lead to deadlock and thus be counter-productive.
- */
- list_add(&me->arch.bug_list, &module_bug_list);
+ err = module_bug_finalize(hdr, sechdrs, me);
+ if (err)
+ return err;
/* Apply feature fixups */
sect = find_section(hdr, sechdrs, "__ftr_fixup");
void module_arch_cleanup(struct module *mod)
{
- list_del(&mod->arch.bug_list);
+ module_bug_cleanup(mod);
}
struct bug_entry *module_find_bug(unsigned long bugaddr)
return -ENODEV;
total_size = ppc_md.nvram_size();
- header = (char *) kmalloc(NVRAM_HEADER_LEN, GFP_KERNEL);
+ header = kmalloc(NVRAM_HEADER_LEN, GFP_KERNEL);
if (!header) {
printk(KERN_ERR "nvram_scan_partitions: Failed kmalloc\n");
return -ENOMEM;
}
/* initialize our anchor for the nvram partition list */
- nvram_part = (struct nvram_partition *) kmalloc(sizeof(struct nvram_partition), GFP_KERNEL);
+ nvram_part = kmalloc(sizeof(struct nvram_partition), GFP_KERNEL);
if (!nvram_part) {
printk(KERN_ERR "nvram_init: Failed kmalloc\n");
return -ENOMEM;
if (rc)
return rc;
- device_create_file(&ofdev->dev, &dev_attr_devspec);
-
- return 0;
+ return device_create_file(&ofdev->dev, &dev_attr_devspec);
}
void of_device_unregister(struct of_device *ofdev)
char *name = dev->dev.bus_id;
const u32 *reg;
u64 addr;
- long magic;
+ int magic;
/*
* If it's a DCR based device, use 'd' for native DCRs
struct pci_controller* hose;
struct property *map_prop;
- pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL);
+ pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
if (!pci_to_OF_bus_map) {
printk(KERN_ERR "Can't allocate OF bus map !\n");
return;
return NULL;
}
-static int
-scan_OF_pci_childs_iterator(struct device_node* node, void* data)
+static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
+ unsigned int devfn)
{
- const unsigned int *reg;
- u8* fdata = (u8*)data;
-
- reg = get_property(node, "reg", NULL);
- if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
- && ((reg[0] >> 16) & 0xff) == fdata[0])
- return 1;
- return 0;
+ struct device_node *np = NULL;
+ const u32 *reg;
+ unsigned int psize;
+
+ while ((np = of_get_next_child(parent, np)) != NULL) {
+ reg = get_property(np, "reg", &psize);
+ if (reg == NULL || psize < 4)
+ continue;
+ if (((reg[0] >> 8) & 0xff) == devfn)
+ return np;
+ }
+ return NULL;
}
-static struct device_node*
-scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
+
+static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
{
- u8 filter_data[2] = {bus, dev_fn};
+ struct device_node *parent, *np;
+
+ /* Are we a root bus ? */
+ if (bus->self == NULL || bus->parent == NULL) {
+ struct pci_controller *hose = pci_bus_to_hose(bus->number);
+ if (hose == NULL)
+ return NULL;
+ return of_node_get(hose->arch_data);
+ }
+
+ /* not a root bus, we need to get our parent */
+ parent = scan_OF_for_pci_bus(bus->parent);
+ if (parent == NULL)
+ return NULL;
+
+ /* now iterate for children for a match */
+ np = scan_OF_for_pci_dev(parent, bus->self->devfn);
+ of_node_put(parent);
- return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data);
+ /* sanity check */
+ if (strcmp(np->type, "pci") != 0)
+ printk(KERN_WARNING "pci: wrong type \"%s\" for bridge %s\n",
+ np->type, np->full_name);
+
+ return np;
}
/*
struct device_node *
pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
{
- struct pci_controller *hose;
- struct device_node *node;
- int busnr;
+ struct device_node *parent, *np;
if (!have_of)
return NULL;
-
- /* Lookup the hose */
- busnr = bus->number;
- hose = pci_bus_to_hose(busnr);
- if (!hose)
- return NULL;
- /* Check it has an OF node associated */
- node = (struct device_node *) hose->arch_data;
- if (!node)
+ DBG("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
+ parent = scan_OF_for_pci_bus(bus);
+ if (parent == NULL)
return NULL;
-
- /* Fixup bus number according to what OF think it is. */
-#ifdef CONFIG_PPC_PMAC
- /* The G5 need a special case here. Basically, we don't remap all
- * busses on it so we don't create the pci-OF-map. However, we do
- * remap the AGP bus and so have to deal with it. A future better
- * fix has to be done by making the remapping per-host and always
- * filling the pci_to_OF map. --BenH
+ DBG(" parent is %s\n", parent ? parent->full_name : "<NULL>");
+ np = scan_OF_for_pci_dev(parent, devfn);
+ of_node_put(parent);
+ DBG(" result is %s\n", np ? np->full_name : "<NULL>");
+
+ /* XXX most callers don't release the returned node
+ * mostly because ppc64 doesn't increase the refcount,
+ * we need to fix that.
*/
- if (machine_is(powermac) && busnr >= 0xf0)
- busnr -= 0xf0;
- else
-#endif
- if (pci_to_OF_bus_map)
- busnr = pci_to_OF_bus_map[busnr];
- if (busnr == 0xff)
- return NULL;
-
- /* Now, lookup childs of the hose */
- return scan_OF_childs_for_device(node->child, busnr, devfn);
+ return np;
}
EXPORT_SYMBOL(pci_busdev_to_OF_node);
static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
- unsigned long *offset,
+ resource_size_t *offset,
enum pci_mmap_state mmap_state)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
/* If memory, add on the PCI bridge address offset */
if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
*offset += hose->pci_mem_offset;
+#endif
res_bit = IORESOURCE_MEM;
} else {
io_offset = hose->io_base_virt - (void __iomem *)_IO_BASE;
else
prot |= _PAGE_GUARDED;
- printk("PCI map for %s:%llx, prot: %lx\n", pci_name(dev),
- (unsigned long long)rp->start, prot);
-
return __pgprot(prot);
}
enum pci_mmap_state mmap_state,
int write_combine)
{
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
struct resource *rp;
int ret;
resource_size_t *start, resource_size_t *end)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
- unsigned long offset = 0;
+ resource_size_t offset = 0;
if (hose == NULL)
return;
if (rsrc->flags & IORESOURCE_IO)
- offset = (void __iomem *)_IO_BASE - hose->io_base_virt
- + hose->io_base_phys;
+ offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+
+ /* We pass a fully fixed up address to userland for MMIO instead of
+ * a BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem !
+ *
+ * That means that we'll have potentially 64 bits values where some
+ * userland apps only expect 32 (like X itself since it thinks only
+ * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+ * 32 bits CHRPs :-(
+ *
+ * Hopefully, the sysfs insterface is immune to that gunk. Once X
+ * has been fixed (and the fix spread enough), we can re-enable the
+ * 2 lines below and pass down a BAR value to userland. In that case
+ * we'll also have to re-enable the matching code in
+ * __pci_mmap_make_offset().
+ *
+ * BenH.
+ */
+#if 0
+ else if (rsrc->flags & IORESOURCE_MEM)
+ offset = hose->pci_mem_offset;
+#endif
- *start = rsrc->start + offset;
- *end = rsrc->end + offset;
+ *start = rsrc->start - offset;
+ *end = rsrc->end - offset;
}
-void __init
-pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
- int flags, char *name)
+void __init pci_init_resource(struct resource *res, resource_size_t start,
+ resource_size_t end, int flags, char *name)
{
res->start = start;
res->end = end;
* Returns negative error code on failure, zero on success.
*/
static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
- unsigned long *offset,
+ resource_size_t *offset,
enum pci_mmap_state mmap_state)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
/* If memory, add on the PCI bridge address offset */
if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
*offset += hose->pci_mem_offset;
+#endif
res_bit = IORESOURCE_MEM;
} else {
io_offset = (unsigned long)hose->io_base_virt - pci_io_base;
else
prot |= _PAGE_GUARDED;
- printk(KERN_DEBUG "PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
- prot);
-
return __pgprot(prot);
}
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
struct resource *rp;
int ret;
void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
- u64 *start, u64 *end)
+ resource_size_t *start, resource_size_t *end)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
- unsigned long offset = 0;
+ resource_size_t offset = 0;
if (hose == NULL)
return;
if (rsrc->flags & IORESOURCE_IO)
- offset = pci_io_base - (unsigned long)hose->io_base_virt +
- hose->io_base_phys;
+ offset = (unsigned long)hose->io_base_virt - pci_io_base;
+
+ /* We pass a fully fixed up address to userland for MMIO instead of
+ * a BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem !
+ *
+ * That means that we'll have potentially 64 bits values where some
+ * userland apps only expect 32 (like X itself since it thinks only
+ * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+ * 32 bits CHRPs :-(
+ *
+ * Hopefully, the sysfs insterface is immune to that gunk. Once X
+ * has been fixed (and the fix spread enough), we can re-enable the
+ * 2 lines below and pass down a BAR value to userland. In that case
+ * we'll also have to re-enable the matching code in
+ * __pci_mmap_make_offset().
+ *
+ * BenH.
+ */
+#if 0
+ else if (rsrc->flags & IORESOURCE_MEM)
+ offset = hose->pci_mem_offset;
+#endif
- *start = rsrc->start + offset;
- *end = rsrc->end + offset;
+ *start = rsrc->start - offset;
+ *end = rsrc->end - offset;
}
struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
extern long *intercept_table;
EXPORT_SYMBOL(intercept_table);
#endif /* CONFIG_PPC_STD_MMU_32 */
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_DCR_NATIVE
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
static loff_t page_map_seek( struct file *file, loff_t off, int whence)
{
loff_t new;
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
switch(whence) {
case 0:
static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes,
loff_t *ppos)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
return simple_read_from_buffer(buf, nbytes, ppos, dp->data, dp->size);
}
static int page_map_mmap( struct file *file, struct vm_area_struct *vma )
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
if ((vma->vm_end - vma->vm_start) > dp->size)
return -EINVAL;
return of_read_ulong(p, s);
}
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Interpret the ibm,dynamic-memory property in the
+ * /ibm,dynamic-reconfiguration-memory node.
+ * This contains a list of memory blocks along with NUMA affinity
+ * information.
+ */
+static int __init early_init_dt_scan_drconf_memory(unsigned long node)
+{
+ cell_t *dm, *ls;
+ unsigned long l, n;
+ unsigned long base, size, lmb_size, flags;
+
+ ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
+ if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
+ return 0;
+ lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+
+ dm = (cell_t *)of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
+ if (dm == NULL || l < sizeof(cell_t))
+ return 0;
+
+ n = *dm++; /* number of entries */
+ if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t))
+ return 0;
+
+ for (; n != 0; --n) {
+ base = dt_mem_next_cell(dt_root_addr_cells, &dm);
+ flags = dm[3];
+ /* skip DRC index, pad, assoc. list index, flags */
+ dm += 4;
+ /* skip this block if the reserved bit is set in flags (0x80)
+ or if the block is not assigned to this partition (0x8) */
+ if ((flags & 0x80) || !(flags & 0x8))
+ continue;
+ size = lmb_size;
+ if (iommu_is_off) {
+ if (base >= 0x80000000ul)
+ continue;
+ if ((base + size) > 0x80000000ul)
+ size = 0x80000000ul - base;
+ }
+ lmb_add(base, size);
+ }
+ lmb_dump_all();
+ return 0;
+}
+#else
+#define early_init_dt_scan_drconf_memory(node) 0
+#endif /* CONFIG_PPC_PSERIES */
static int __init early_init_dt_scan_memory(unsigned long node,
const char *uname, int depth, void *data)
cell_t *reg, *endp;
unsigned long l;
+ /* Look for the ibm,dynamic-reconfiguration-memory node */
+ if (depth == 1 &&
+ strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
+ return early_init_dt_scan_drconf_memory(node);
+
/* We are scanning "memory" nodes only */
if (type == NULL) {
/*
/* option vector 5: PAPR/OF options */
3 - 2, /* length */
0, /* don't ignore, don't halt */
- OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
+ OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY,
};
/* Old method - ELF header with PT_NOTE sections */
}
EXPORT_SYMBOL(rtas_token);
+int rtas_service_present(const char *service)
+{
+ return rtas_token(service) != RTAS_UNKNOWN_SERVICE;
+}
+EXPORT_SYMBOL(rtas_service_present);
+
#ifdef CONFIG_RTAS_ERROR_LOGGING
/*
* Return the firmware-specified size of the error log buffer
return 0;
}
-#ifdef CONFIG_HOTPLUG_CPU
-/* This version can't take the spinlock, because it never returns */
-static struct rtas_args rtas_stop_self_args = {
- /* The token is initialized for real in setup_system() */
- .token = RTAS_UNKNOWN_SERVICE,
- .nargs = 0,
- .nret = 1,
- .rets = &rtas_stop_self_args.args[0],
-};
-
-void rtas_stop_self(void)
-{
- struct rtas_args *rtas_args = &rtas_stop_self_args;
-
- local_irq_disable();
-
- BUG_ON(rtas_args->token == RTAS_UNKNOWN_SERVICE);
-
- printk("cpu %u (hwid %u) Ready to die...\n",
- smp_processor_id(), hard_smp_processor_id());
- enter_rtas(__pa(rtas_args));
-
- panic("Alas, I survived.\n");
-}
-#endif
-
/*
* Call early during boot, before mem init or bootmem, to retrieve the RTAS
* informations from the device-tree and allocate the RMO buffer for userland
#endif
rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
-#ifdef CONFIG_HOTPLUG_CPU
- rtas_stop_self_args.token = rtas_token("stop-self");
-#endif /* CONFIG_HOTPLUG_CPU */
#ifdef CONFIG_RTAS_ERROR_LOGGING
rtas_last_error_token = rtas_token("rtas-last-error");
#endif
static int rtas_flash_release(struct inode *inode, struct file *file)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
struct rtas_update_flash_t *uf;
uf = (struct rtas_update_flash_t *) dp->data;
static ssize_t rtas_flash_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
struct rtas_update_flash_t *uf;
char msg[RTAS_MSG_MAXLEN];
int msglen;
static ssize_t rtas_flash_write(struct file *file, const char __user *buffer,
size_t count, loff_t *off)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
struct rtas_update_flash_t *uf;
char *p;
int next_free;
static ssize_t manage_flash_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
struct rtas_manage_flash_t *args_buf;
char msg[RTAS_MSG_MAXLEN];
int msglen;
static ssize_t manage_flash_write(struct file *file, const char __user *buf,
size_t count, loff_t *off)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
struct rtas_manage_flash_t *args_buf;
const char reject_str[] = "0";
const char commit_str[] = "1";
static ssize_t validate_flash_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
struct rtas_validate_flash_t *args_buf;
char msg[RTAS_MSG_MAXLEN];
int msglen;
static ssize_t validate_flash_write(struct file *file, const char __user *buf,
size_t count, loff_t *off)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
struct rtas_validate_flash_t *args_buf;
int rc;
static int validate_flash_release(struct inode *inode, struct file *file)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
struct rtas_validate_flash_t *args_buf;
args_buf = (struct rtas_validate_flash_t *) dp->data;
SYSFS_PMCSETUP(pmc7, SPRN_PMC7);
SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
SYSFS_PMCSETUP(purr, SPRN_PURR);
+SYSFS_PMCSETUP(spurr, SPRN_SPURR);
+SYSFS_PMCSETUP(dscr, SPRN_DSCR);
static SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0);
static SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1);
static SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7);
static SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8);
static SYSDEV_ATTR(purr, 0600, show_purr, NULL);
+static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
+static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
static void register_cpu_online(unsigned int cpu)
{
if (cpu_has_feature(CPU_FTR_PURR))
sysdev_create_file(s, &attr_purr);
+
+ if (cpu_has_feature(CPU_FTR_SPURR))
+ sysdev_create_file(s, &attr_spurr);
+
+ if (cpu_has_feature(CPU_FTR_DSCR))
+ sysdev_create_file(s, &attr_dscr);
}
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_has_feature(CPU_FTR_PURR))
sysdev_remove_file(s, &attr_purr);
+
+ if (cpu_has_feature(CPU_FTR_SPURR))
+ sysdev_remove_file(s, &attr_spurr);
+
+ if (cpu_has_feature(CPU_FTR_DSCR))
+ sysdev_remove_file(s, &attr_dscr);
}
#endif /* CONFIG_HOTPLUG_CPU */
#include <linux/kprobes.h>
#include <linux/kexec.h>
#include <linux/backlight.h>
+#include <linux/bug.h>
#include <asm/kdebug.h>
#include <asm/pgtable.h>
return -EINVAL;
}
-/*
- * Look through the list of trap instructions that are used for BUG(),
- * BUG_ON() and WARN_ON() and see if we hit one. At this point we know
- * that the exception was caused by a trap instruction of some kind.
- * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0
- * otherwise.
- */
-extern struct bug_entry __start___bug_table[], __stop___bug_table[];
-
-#ifndef CONFIG_MODULES
-#define module_find_bug(x) NULL
-#endif
-
-struct bug_entry *find_bug(unsigned long bugaddr)
+int is_valid_bugaddr(unsigned long addr)
{
- struct bug_entry *bug;
-
- for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
- if (bugaddr == bug->bug_addr)
- return bug;
- return module_find_bug(bugaddr);
-}
-
-static int check_bug_trap(struct pt_regs *regs)
-{
- struct bug_entry *bug;
- unsigned long addr;
-
- if (regs->msr & MSR_PR)
- return 0; /* not in kernel */
- addr = regs->nip; /* address of trap instruction */
- if (addr < PAGE_OFFSET)
- return 0;
- bug = find_bug(regs->nip);
- if (bug == NULL)
- return 0;
- if (bug->line & BUG_WARNING_TRAP) {
- /* this is a WARN_ON rather than BUG/BUG_ON */
- printk(KERN_ERR "Badness in %s at %s:%ld\n",
- bug->function, bug->file,
- bug->line & ~BUG_WARNING_TRAP);
- dump_stack();
- return 1;
- }
- printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
- bug->function, bug->file, bug->line);
-
- return 0;
+ return is_kernel_addr(addr);
}
void __kprobes program_check_exception(struct pt_regs *regs)
unsigned int reason = get_reason(regs);
extern int do_mathemu(struct pt_regs *regs);
+ /* We can now get here via a FP Unavailable exception if the core
+ * has no FPU, in that case no reason flags will be set */
#ifdef CONFIG_MATH_EMULATION
/* (reason & REASON_ILLEGAL) would be the obvious thing here,
* but there seems to be a hardware bug on the 405GP (RevD)
return;
if (debugger_bpt(regs))
return;
- if (check_bug_trap(regs)) {
+
+ if (!(regs->msr & MSR_PR) && /* not user-mode */
+ report_bug(regs->nip) == BUG_TRAP_TYPE_WARN) {
regs->nip += 4;
return;
}
__stop___ex_table = .;
}
- __bug_table : {
- __start___bug_table = .;
- *(__bug_table)
- __stop___bug_table = .;
- }
+ BUG_TABLE
/*
* Init sections discarded at runtime
struct vm_struct *vm2 = NULL;
struct vm_struct *new_vm = NULL;
- vm1 = (struct vm_struct *) kmalloc(sizeof(*vm1), GFP_KERNEL);
+ vm1 = kmalloc(sizeof(*vm1), GFP_KERNEL);
if (vm1 == NULL) {
printk(KERN_ERR "%s() out of memory\n", __FUNCTION__);
return NULL;
* uppermost remainder, and use existing parent one for the
* lower remainder of parent range
*/
- vm2 = (struct vm_struct *) kmalloc(sizeof(*vm2), GFP_KERNEL);
+ vm2 = kmalloc(sizeof(*vm2), GFP_KERNEL);
if (vm2 == NULL) {
printk(KERN_ERR "%s() out of memory\n", __FUNCTION__);
kfree(vm1);
break;
}
- area = (struct vm_struct *) kmalloc(sizeof(*area), GFP_KERNEL);
+ area = kmalloc(sizeof(*area), GFP_KERNEL);
if (!area)
return NULL;
area->flags = 0;
return lmb_end_of_DRAM() - start;
}
+/*
+ * Extract NUMA information from the ibm,dynamic-reconfiguration-memory
+ * node. This assumes n_mem_{addr,size}_cells have been set.
+ */
+static void __init parse_drconf_memory(struct device_node *memory)
+{
+ const unsigned int *lm, *dm, *aa;
+ unsigned int ls, ld, la;
+ unsigned int n, aam, aalen;
+ unsigned long lmb_size, size;
+ int nid, default_nid = 0;
+ unsigned int start, ai, flags;
+
+ lm = get_property(memory, "ibm,lmb-size", &ls);
+ dm = get_property(memory, "ibm,dynamic-memory", &ld);
+ aa = get_property(memory, "ibm,associativity-lookup-arrays", &la);
+ if (!lm || !dm || !aa ||
+ ls < sizeof(unsigned int) || ld < sizeof(unsigned int) ||
+ la < 2 * sizeof(unsigned int))
+ return;
+
+ lmb_size = read_n_cells(n_mem_size_cells, &lm);
+ n = *dm++; /* number of LMBs */
+ aam = *aa++; /* number of associativity lists */
+ aalen = *aa++; /* length of each associativity list */
+ if (ld < (n * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int) ||
+ la < (aam * aalen + 2) * sizeof(unsigned int))
+ return;
+
+ for (; n != 0; --n) {
+ start = read_n_cells(n_mem_addr_cells, &dm);
+ ai = dm[2];
+ flags = dm[3];
+ dm += 4;
+ /* 0x80 == reserved, 0x8 = assigned to us */
+ if ((flags & 0x80) || !(flags & 0x8))
+ continue;
+ nid = default_nid;
+ /* flags & 0x40 means associativity index is invalid */
+ if (min_common_depth > 0 && min_common_depth <= aalen &&
+ (flags & 0x40) == 0 && ai < aam) {
+ /* this is like of_node_to_nid_single */
+ nid = aa[ai * aalen + min_common_depth - 1];
+ if (nid == 0xffff || nid >= MAX_NUMNODES)
+ nid = default_nid;
+ }
+ node_set_online(nid);
+
+ size = numa_enforce_memory_limit(start, lmb_size);
+ if (!size)
+ continue;
+
+ add_active_range(nid, start >> PAGE_SHIFT,
+ (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+ }
+}
+
static int __init parse_numa_properties(void)
{
struct device_node *cpu = NULL;
goto new_range;
}
+ /*
+ * Now do the same thing for each LMB listed in the ibm,dynamic-memory
+ * property in the ibm,dynamic-reconfiguration-memory node.
+ */
+ memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+ if (memory)
+ parse_drconf_memory(memory);
+
return 0;
}
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
#include <asm/of_platform.h>
#include <asm/mpc52xx.h>
static struct attribute *spu_attributes[] = {
&attr_spu_temperature.attr,
+ NULL,
};
static struct attribute_group spu_attribute_group = {
static struct attribute *ppe_attributes[] = {
&attr_ppe_temperature0.attr,
&attr_ppe_temperature1.attr,
+ NULL,
};
static struct attribute_group ppe_attribute_group = {
return IRQ_HANDLED;
}
-int __init cbe_init_pm_irq(void)
+static int __init cbe_init_pm_irq(void)
{
unsigned int irq;
int rc, node;
+ if (!machine_is(cell))
+ return 0;
+
for_each_node(node) {
irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI |
(node << IIC_IRQ_NODE_SHIFT));
struct fdtable *fdt = files_fdtable(current->files);
int size = 0, fd;
- for (fd = 0; fd < fdt->max_fdset && fd < fdt->max_fds; fd++) {
+ for (fd = 0; fd < fdt->max_fds; fd++) {
if (FD_ISSET(fd, fdt->open_fds)) {
struct file *file = fcheck(fd);
struct dentry *dir;
int ret;
- dir = file->f_dentry;
+ dir = file->f_path.dentry;
parent = dir->d_parent->d_inode;
ctx = SPUFS_I(dir->d_inode)->i_ctx;
struct dentry *dir;
int ret;
- dir = file->f_dentry;
+ dir = file->f_path.dentry;
parent = dir->d_parent->d_inode;
ret = spufs_rmgang(parent, dir);
if (filp->f_op != &spufs_context_fops)
goto out;
- i = SPUFS_I(filp->f_dentry->d_inode);
+ i = SPUFS_I(filp->f_path.dentry->d_inode);
ret = spufs_run_spu(filp, i->i_ctx, &npc, &status);
if (put_user(npc, unpc))
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
const char __user *buf,
size_t count, loff_t *ppos)
{
- struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
ssize_t rc;
dma_addr_t dma_addr;
char *page;
for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
if (np->name == NULL)
continue;
- if (strcmp(np->name, "pci") == 0) {
+ if (!strcmp(np->name, "pci") || !strcmp(np->name, "pcie")) {
if (add_bridge(np) == 0)
of_node_get(np);
}
#include <asm/of_device.h>
#include <asm/lmb.h>
#include <asm/mpic.h>
+#include <asm/rtas.h>
#include <asm/udbg.h>
#include "maple.h"
};
#endif /* CONFIG_SMP */
+static void __init maple_use_rtas_reboot_and_halt_if_present(void)
+{
+ if (rtas_service_present("system-reboot") &&
+ rtas_service_present("power-off")) {
+ ppc_md.restart = rtas_restart;
+ ppc_md.power_off = rtas_power_off;
+ ppc_md.halt = rtas_halt;
+ }
+}
+
void __init maple_setup_arch(void)
{
/* init to some ~sane value until calibrate_delay() runs */
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
+ maple_use_rtas_reboot_and_halt_if_present();
printk(KERN_DEBUG "Using native/NAP idle loop\n");
}
If you have any doubt, choose the default y.
+config PS3_VUART
+ depends on PPC_PS3
+ bool "PS3 Virtual UART support"
+ default y
+ help
+ Include support for the PS3 Virtual UART.
+
+ This support is required for several system services
+ including the System Manager and AV Settings. In
+ general, all users will say Y.
+
endmenu
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
+
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o
printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
pdn->eeh_check_count);
dump_stack();
+ msleep(5000);
/* re-read the slot reset state */
if (read_slot_reset_state(pdn, rets) != 0)
return piar;
}
}
- piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
+ piar = kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
if (!piar)
return NULL;
static void eeh_report_resume(struct pci_dev *dev, void *userdata)
{
struct pci_driver *driver = dev->driver;
+ struct device_node *dn = pci_device_to_OF_node(dev);
dev->error_state = pci_channel_io_normal;
if (!driver)
return;
- if (!driver->err_handler)
- return;
- if (!driver->err_handler->resume)
+
+ if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
+ PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
+ enable_irq(dev->irq);
+ }
+ if (!driver->err_handler ||
+ !driver->err_handler->resume)
return;
driver->err_handler->resume(dev);
if (rc)
result = PCI_ERS_RESULT_NEED_RESET;
+ else
+ result = PCI_ERS_RESULT_RECOVERED;
}
/* If any device has a hard failure, then shut off everything. */
--- /dev/null
+/*
+ * pseries CPU Hotplug infrastructure.
+ *
+ * Split out from arch/powerpc/platforms/pseries/setup.c
+ * arch/powerpc/kernel/rtas.c, and arch/powerpc/platforms/pseries/smp.c
+ *
+ * Peter Bergner, IBM March 2001.
+ * Copyright (C) 2001 IBM.
+ * Dave Engebretsen, Peter Bergner, and
+ * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
+ * Plus various changes from other IBM teams...
+ *
+ * Copyright (C) 2006 Michael Ellerman, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <asm/system.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/firmware.h>
+#include <asm/machdep.h>
+#include <asm/vdso_datapage.h>
+#include <asm/pSeries_reconfig.h>
+#include "xics.h"
+
+/* This version can't take the spinlock, because it never returns */
+static struct rtas_args rtas_stop_self_args = {
+ .token = RTAS_UNKNOWN_SERVICE,
+ .nargs = 0,
+ .nret = 1,
+ .rets = &rtas_stop_self_args.args[0],
+};
+
+static void rtas_stop_self(void)
+{
+ struct rtas_args *args = &rtas_stop_self_args;
+
+ local_irq_disable();
+
+ BUG_ON(args->token == RTAS_UNKNOWN_SERVICE);
+
+ printk("cpu %u (hwid %u) Ready to die...\n",
+ smp_processor_id(), hard_smp_processor_id());
+ enter_rtas(__pa(args));
+
+ panic("Alas, I survived.\n");
+}
+
+static void pseries_mach_cpu_die(void)
+{
+ local_irq_disable();
+ idle_task_exit();
+ xics_teardown_cpu(0);
+ rtas_stop_self();
+ /* Should never get here... */
+ BUG();
+ for(;;);
+}
+
+static int qcss_tok; /* query-cpu-stopped-state token */
+
+/* Get state of physical CPU.
+ * Return codes:
+ * 0 - The processor is in the RTAS stopped state
+ * 1 - stop-self is in progress
+ * 2 - The processor is not in the RTAS stopped state
+ * -1 - Hardware Error
+ * -2 - Hardware Busy, Try again later.
+ */
+static int query_cpu_stopped(unsigned int pcpu)
+{
+ int cpu_status, status;
+
+ status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
+ if (status != 0) {
+ printk(KERN_ERR
+ "RTAS query-cpu-stopped-state failed: %i\n", status);
+ return status;
+ }
+
+ return cpu_status;
+}
+
+static int pseries_cpu_disable(void)
+{
+ int cpu = smp_processor_id();
+
+ cpu_clear(cpu, cpu_online_map);
+ vdso_data->processorCount--;
+
+ /*fix boot_cpuid here*/
+ if (cpu == boot_cpuid)
+ boot_cpuid = any_online_cpu(cpu_online_map);
+
+ /* FIXME: abstract this to not be platform specific later on */
+ xics_migrate_irqs_away();
+ return 0;
+}
+
+static void pseries_cpu_die(unsigned int cpu)
+{
+ int tries;
+ int cpu_status;
+ unsigned int pcpu = get_hard_smp_processor_id(cpu);
+
+ for (tries = 0; tries < 25; tries++) {
+ cpu_status = query_cpu_stopped(pcpu);
+ if (cpu_status == 0 || cpu_status == -1)
+ break;
+ msleep(200);
+ }
+ if (cpu_status != 0) {
+ printk("Querying DEAD? cpu %i (%i) shows %i\n",
+ cpu, pcpu, cpu_status);
+ }
+
+ /* Isolation and deallocation are definatly done by
+ * drslot_chrp_cpu. If they were not they would be
+ * done here. Change isolate state to Isolate and
+ * change allocation-state to Unusable.
+ */
+ paca[cpu].cpu_start = 0;
+}
+
+/*
+ * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle
+ * here is that a cpu device node may represent up to two logical cpus
+ * in the SMT case. We must honor the assumption in other code that
+ * the logical ids for sibling SMT threads x and y are adjacent, such
+ * that x^1 == y and y^1 == x.
+ */
+static int pseries_add_processor(struct device_node *np)
+{
+ unsigned int cpu;
+ cpumask_t candidate_map, tmp = CPU_MASK_NONE;
+ int err = -ENOSPC, len, nthreads, i;
+ const u32 *intserv;
+
+ intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+ if (!intserv)
+ return 0;
+
+ nthreads = len / sizeof(u32);
+ for (i = 0; i < nthreads; i++)
+ cpu_set(i, tmp);
+
+ lock_cpu_hotplug();
+
+ BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
+
+ /* Get a bitmap of unoccupied slots. */
+ cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
+ if (cpus_empty(candidate_map)) {
+ /* If we get here, it most likely means that NR_CPUS is
+ * less than the partition's max processors setting.
+ */
+ printk(KERN_ERR "Cannot add cpu %s; this system configuration"
+ " supports %d logical cpus.\n", np->full_name,
+ cpus_weight(cpu_possible_map));
+ goto out_unlock;
+ }
+
+ while (!cpus_empty(tmp))
+ if (cpus_subset(tmp, candidate_map))
+ /* Found a range where we can insert the new cpu(s) */
+ break;
+ else
+ cpus_shift_left(tmp, tmp, nthreads);
+
+ if (cpus_empty(tmp)) {
+ printk(KERN_ERR "Unable to find space in cpu_present_map for"
+ " processor %s with %d thread(s)\n", np->name,
+ nthreads);
+ goto out_unlock;
+ }
+
+ for_each_cpu_mask(cpu, tmp) {
+ BUG_ON(cpu_isset(cpu, cpu_present_map));
+ cpu_set(cpu, cpu_present_map);
+ set_hard_smp_processor_id(cpu, *intserv++);
+ }
+ err = 0;
+out_unlock:
+ unlock_cpu_hotplug();
+ return err;
+}
+
+/*
+ * Update the present map for a cpu node which is going away, and set
+ * the hard id in the paca(s) to -1 to be consistent with boot time
+ * convention for non-present cpus.
+ */
+static void pseries_remove_processor(struct device_node *np)
+{
+ unsigned int cpu;
+ int len, nthreads, i;
+ const u32 *intserv;
+
+ intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+ if (!intserv)
+ return;
+
+ nthreads = len / sizeof(u32);
+
+ lock_cpu_hotplug();
+ for (i = 0; i < nthreads; i++) {
+ for_each_present_cpu(cpu) {
+ if (get_hard_smp_processor_id(cpu) != intserv[i])
+ continue;
+ BUG_ON(cpu_online(cpu));
+ cpu_clear(cpu, cpu_present_map);
+ set_hard_smp_processor_id(cpu, -1);
+ break;
+ }
+ if (cpu == NR_CPUS)
+ printk(KERN_WARNING "Could not find cpu to remove "
+ "with physical id 0x%x\n", intserv[i]);
+ }
+ unlock_cpu_hotplug();
+}
+
+static int pseries_smp_notifier(struct notifier_block *nb,
+ unsigned long action, void *node)
+{
+ int err = NOTIFY_OK;
+
+ switch (action) {
+ case PSERIES_RECONFIG_ADD:
+ if (pseries_add_processor(node))
+ err = NOTIFY_BAD;
+ break;
+ case PSERIES_RECONFIG_REMOVE:
+ pseries_remove_processor(node);
+ break;
+ default:
+ err = NOTIFY_DONE;
+ break;
+ }
+ return err;
+}
+
+static struct notifier_block pseries_smp_nb = {
+ .notifier_call = pseries_smp_notifier,
+};
+
+static int __init pseries_cpu_hotplug_init(void)
+{
+ rtas_stop_self_args.token = rtas_token("stop-self");
+ qcss_tok = rtas_token("query-cpu-stopped-state");
+
+ if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE ||
+ qcss_tok == RTAS_UNKNOWN_SERVICE) {
+ printk(KERN_INFO "CPU Hotplug not supported by firmware "
+ "- disabling.\n");
+ return 0;
+ }
+
+ ppc_md.cpu_die = pseries_mach_cpu_die;
+ smp_ops->cpu_disable = pseries_cpu_disable;
+ smp_ops->cpu_die = pseries_cpu_die;
+
+ /* Processors can be added/removed only on LPAR */
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ pSeries_reconfig_notifier_register(&pseries_smp_nb);
+
+ return 0;
+}
+arch_initcall(pseries_cpu_hotplug_init);
rc = seq_open(file, &hcall_inst_seq_ops);
seq = file->private_data;
- seq->private = file->f_dentry->d_inode->i_private;
+ seq->private = file->f_path.dentry->d_inode->i_private;
return rc;
}
static ssize_t scanlog_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct inode * inode = file->f_dentry->d_inode;
+ struct inode * inode = file->f_path.dentry->d_inode;
struct proc_dir_entry *dp;
unsigned int *data;
int status;
}
arch_initcall(pSeries_init_panel);
-#ifdef CONFIG_HOTPLUG_CPU
-static void pSeries_mach_cpu_die(void)
-{
- local_irq_disable();
- idle_task_exit();
- xics_teardown_cpu(0);
- rtas_stop_self();
- /* Should never get here... */
- BUG();
- for(;;);
-}
-#else
-#define pSeries_mach_cpu_die NULL
-#endif
-
static int pseries_set_dabr(unsigned long dabr)
{
return plpar_hcall_norets(H_SET_DABR, dabr);
if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
powerpc_firmware_features |= FW_FEATURE_LPAR;
- if (firmware_has_feature(FW_FEATURE_LPAR))
- hpte_init_lpar();
- else
- hpte_init_native();
-
return 1;
}
static int __init pSeries_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "device_type", NULL);
+ char *dtype = of_get_flat_dt_prop(root, "device_type", NULL);
+
if (dtype == NULL)
return 0;
if (strcmp(dtype, "chrp"))
/* Now try to figure out if we are running on LPAR */
of_scan_flat_dt(pSeries_probe_hypertas, NULL);
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ hpte_init_lpar();
+ else
+ hpte_init_native();
+
DBG("Machine is%s LPAR !\n",
(powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
.power_off = rtas_power_off,
.halt = rtas_halt,
.panic = rtas_os_term,
- .cpu_die = pSeries_mach_cpu_die,
.get_boot_time = rtas_get_boot_time,
.get_rtc_time = rtas_get_rtc_time,
.set_rtc_time = rtas_set_rtc_time,
extern void generic_secondary_smp_init(unsigned long);
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Get state of physical CPU.
- * Return codes:
- * 0 - The processor is in the RTAS stopped state
- * 1 - stop-self is in progress
- * 2 - The processor is not in the RTAS stopped state
- * -1 - Hardware Error
- * -2 - Hardware Busy, Try again later.
- */
-static int query_cpu_stopped(unsigned int pcpu)
-{
- int cpu_status;
- int status, qcss_tok;
-
- qcss_tok = rtas_token("query-cpu-stopped-state");
- if (qcss_tok == RTAS_UNKNOWN_SERVICE)
- return -1;
- status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
- if (status != 0) {
- printk(KERN_ERR
- "RTAS query-cpu-stopped-state failed: %i\n", status);
- return status;
- }
-
- return cpu_status;
-}
-
-static int pSeries_cpu_disable(void)
-{
- int cpu = smp_processor_id();
-
- cpu_clear(cpu, cpu_online_map);
- vdso_data->processorCount--;
-
- /*fix boot_cpuid here*/
- if (cpu == boot_cpuid)
- boot_cpuid = any_online_cpu(cpu_online_map);
-
- /* FIXME: abstract this to not be platform specific later on */
- xics_migrate_irqs_away();
- return 0;
-}
-
-static void pSeries_cpu_die(unsigned int cpu)
-{
- int tries;
- int cpu_status;
- unsigned int pcpu = get_hard_smp_processor_id(cpu);
-
- for (tries = 0; tries < 25; tries++) {
- cpu_status = query_cpu_stopped(pcpu);
- if (cpu_status == 0 || cpu_status == -1)
- break;
- msleep(200);
- }
- if (cpu_status != 0) {
- printk("Querying DEAD? cpu %i (%i) shows %i\n",
- cpu, pcpu, cpu_status);
- }
-
- /* Isolation and deallocation are definatly done by
- * drslot_chrp_cpu. If they were not they would be
- * done here. Change isolate state to Isolate and
- * change allocation-state to Unusable.
- */
- paca[cpu].cpu_start = 0;
-}
-
-/*
- * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle
- * here is that a cpu device node may represent up to two logical cpus
- * in the SMT case. We must honor the assumption in other code that
- * the logical ids for sibling SMT threads x and y are adjacent, such
- * that x^1 == y and y^1 == x.
- */
-static int pSeries_add_processor(struct device_node *np)
-{
- unsigned int cpu;
- cpumask_t candidate_map, tmp = CPU_MASK_NONE;
- int err = -ENOSPC, len, nthreads, i;
- const u32 *intserv;
-
- intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
- if (!intserv)
- return 0;
-
- nthreads = len / sizeof(u32);
- for (i = 0; i < nthreads; i++)
- cpu_set(i, tmp);
-
- lock_cpu_hotplug();
-
- BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
-
- /* Get a bitmap of unoccupied slots. */
- cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
- if (cpus_empty(candidate_map)) {
- /* If we get here, it most likely means that NR_CPUS is
- * less than the partition's max processors setting.
- */
- printk(KERN_ERR "Cannot add cpu %s; this system configuration"
- " supports %d logical cpus.\n", np->full_name,
- cpus_weight(cpu_possible_map));
- goto out_unlock;
- }
-
- while (!cpus_empty(tmp))
- if (cpus_subset(tmp, candidate_map))
- /* Found a range where we can insert the new cpu(s) */
- break;
- else
- cpus_shift_left(tmp, tmp, nthreads);
-
- if (cpus_empty(tmp)) {
- printk(KERN_ERR "Unable to find space in cpu_present_map for"
- " processor %s with %d thread(s)\n", np->name,
- nthreads);
- goto out_unlock;
- }
-
- for_each_cpu_mask(cpu, tmp) {
- BUG_ON(cpu_isset(cpu, cpu_present_map));
- cpu_set(cpu, cpu_present_map);
- set_hard_smp_processor_id(cpu, *intserv++);
- }
- err = 0;
-out_unlock:
- unlock_cpu_hotplug();
- return err;
-}
-
-/*
- * Update the present map for a cpu node which is going away, and set
- * the hard id in the paca(s) to -1 to be consistent with boot time
- * convention for non-present cpus.
- */
-static void pSeries_remove_processor(struct device_node *np)
-{
- unsigned int cpu;
- int len, nthreads, i;
- const u32 *intserv;
-
- intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
- if (!intserv)
- return;
-
- nthreads = len / sizeof(u32);
-
- lock_cpu_hotplug();
- for (i = 0; i < nthreads; i++) {
- for_each_present_cpu(cpu) {
- if (get_hard_smp_processor_id(cpu) != intserv[i])
- continue;
- BUG_ON(cpu_online(cpu));
- cpu_clear(cpu, cpu_present_map);
- set_hard_smp_processor_id(cpu, -1);
- break;
- }
- if (cpu == NR_CPUS)
- printk(KERN_WARNING "Could not find cpu to remove "
- "with physical id 0x%x\n", intserv[i]);
- }
- unlock_cpu_hotplug();
-}
-
-static int pSeries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node)
-{
- int err = NOTIFY_OK;
-
- switch (action) {
- case PSERIES_RECONFIG_ADD:
- if (pSeries_add_processor(node))
- err = NOTIFY_BAD;
- break;
- case PSERIES_RECONFIG_REMOVE:
- pSeries_remove_processor(node);
- break;
- default:
- err = NOTIFY_DONE;
- break;
- }
- return err;
-}
-
-static struct notifier_block pSeries_smp_nb = {
- .notifier_call = pSeries_smp_notifier,
-};
-
-#endif /* CONFIG_HOTPLUG_CPU */
-
/**
* smp_startup_cpu() - start the given cpu
*
DBG(" -> smp_init_pSeries()\n");
-#ifdef CONFIG_HOTPLUG_CPU
- smp_ops->cpu_disable = pSeries_cpu_disable;
- smp_ops->cpu_die = pSeries_cpu_die;
-
- /* Processors can be added/removed only on LPAR */
- if (firmware_has_feature(FW_FEATURE_LPAR))
- pSeries_reconfig_notifier_register(&pSeries_smp_nb);
-#endif
-
/* Mark threads which are still spinning in hold loops. */
if (cpu_has_feature(CPU_FTR_SMT)) {
for_each_present_cpu(i) {
obj-$(CONFIG_MPIC) += mpic.o
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
-obj-$(CONFIG_PPC_DCR) += dcr.o dcr-low.o
+obj-$(CONFIG_PPC_DCR) += dcr.o
+obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
+++ /dev/null
-/*
- * "Indirect" DCR access
- *
- * Copyright (c) 2004 Eugene Surovegin <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-#define DCR_ACCESS_PROLOG(table) \
- rlwinm r3,r3,4,18,27; \
- lis r5,table@h; \
- ori r5,r5,table@l; \
- add r3,r3,r5; \
- mtctr r3; \
- bctr
-
-_GLOBAL(__mfdcr)
- DCR_ACCESS_PROLOG(__mfdcr_table)
-
-_GLOBAL(__mtdcr)
- DCR_ACCESS_PROLOG(__mtdcr_table)
-
-__mfdcr_table:
- mfdcr r3,0; blr
-__mtdcr_table:
- mtdcr 0,r4; blr
-
-dcr = 1
- .rept 1023
- mfdcr r3,dcr; blr
- mtdcr dcr,r4; blr
- dcr = dcr + 1
- .endr
qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
temp & ~qe_ic_info[src].mask);
- spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static void qe_ic_mask_irq_and_ack(unsigned int virq)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- unsigned long flags;
- u32 temp;
-
- spin_lock_irqsave(&qe_ic_lock, flags);
-
- temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
- qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
- temp & ~qe_ic_info[src].mask);
-
- /* There is nothing to do for ack here, ack is handled in ISR */
+ /* Flush the above write before enabling interrupts; otherwise,
+ * spurious interrupts will sometimes happen. To be 100% sure
+ * that the write has reached the device before interrupts are
+ * enabled, the mask register would have to be read back; however,
+ * this is not required for correctness, only to avoid wasting
+ * time on a large number of spurious interrupts. In testing,
+ * a sync reduced the observed spurious interrupts to zero.
+ */
+ mb();
spin_unlock_irqrestore(&qe_ic_lock, flags);
}
.typename = " QEIC ",
.unmask = qe_ic_unmask_irq,
.mask = qe_ic_mask_irq,
- .mask_ack = qe_ic_mask_irq_and_ack,
+ .mask_ack = qe_ic_mask_irq,
};
static int qe_ic_host_match(struct irq_host *h, struct device_node *node)
return irq_linear_revmap(qe_ic->irqhost, irq);
}
-/* FIXME: We mask all the QE Low interrupts while handling. We should
- * let other interrupt come in, but BAD interrupts are generated */
void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc)
{
struct qe_ic *qe_ic = desc->handler_data;
- struct irq_chip *chip = irq_desc[irq].chip;
-
unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
- chip->mask_ack(irq);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
- chip->unmask(irq);
}
-/* FIXME: We mask all the QE High interrupts while handling. We should
- * let other interrupt come in, but BAD interrupts are generated */
void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc)
{
struct qe_ic *qe_ic = desc->handler_data;
- struct irq_chip *chip = irq_desc[irq].chip;
-
unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
- chip->mask_ack(irq);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
- chip->unmask(irq);
}
void __init qe_ic_init(struct device_node *node, unsigned int flags)
#include <linux/kernel.h>
#include <asm/of_device.h>
+#include <asm/of_platform.h>
static int __init powerpc_flash_init(void)
{
#include <linux/sysrq.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/bug.h>
#include <asm/ptrace.h>
#include <asm/string.h>
#include <asm/cputable.h>
#include <asm/rtas.h>
#include <asm/sstep.h>
-#include <asm/bug.h>
#include <asm/irq_regs.h>
#include <asm/spu.h>
#include <asm/spu_priv1.h>
static void print_bug_trap(struct pt_regs *regs)
{
- struct bug_entry *bug;
+ const struct bug_entry *bug;
unsigned long addr;
if (regs->msr & MSR_PR)
bug = find_bug(regs->nip);
if (bug == NULL)
return;
- if (bug->line & BUG_WARNING_TRAP)
+ if (is_warning_bug(bug))
return;
- printf("kernel BUG in %s at %s:%d!\n",
- bug->function, bug->file, (unsigned int)bug->line);
+ printf("kernel BUG at %s:%u!\n",
+ bug->file, bug->line);
}
void excprint(struct pt_regs *fp)
/* Allocate space for the buffer descriptors from regular memory.
* Initialize base addresses for the buffer descriptors.
*/
- cep->rx_bd_base = (cbd_t *)kmalloc(sizeof(cbd_t) * RX_RING_SIZE,
+ cep->rx_bd_base = kmalloc(sizeof(cbd_t) * RX_RING_SIZE,
GFP_KERNEL | GFP_DMA);
ep->fen_genfcc.fcc_rbase = __pa(cep->rx_bd_base);
- cep->tx_bd_base = (cbd_t *)kmalloc(sizeof(cbd_t) * TX_RING_SIZE,
+ cep->tx_bd_base = kmalloc(sizeof(cbd_t) * TX_RING_SIZE,
GFP_KERNEL | GFP_DMA);
ep->fen_genfcc.fcc_tbase = __pa(cep->tx_bd_base);
int rc = 0;
if (sq.busy)
- rc = sq_fsync(file, file->f_dentry);
+ rc = sq_fsync(file, file->f_path.dentry);
sound.soft = sound.dsp;
sound.hard = sound.dsp;
sound_silence();
return 0;
case SNDCTL_DSP_POST:
case SNDCTL_DSP_SYNC:
- return sq_fsync(file, file->f_dentry);
+ return sq_fsync(file, file->f_path.dentry);
/* ++TeSche: before changing any of these it's
* probably wise to wait until sound playing has
* settled down. */
case SNDCTL_DSP_SPEED:
- sq_fsync(file, file->f_dentry);
+ sq_fsync(file, file->f_path.dentry);
IOCTL_IN(arg, data);
return IOCTL_OUT(arg, sound_set_speed(data));
case SNDCTL_DSP_STEREO:
- sq_fsync(file, file->f_dentry);
+ sq_fsync(file, file->f_path.dentry);
IOCTL_IN(arg, data);
return IOCTL_OUT(arg, sound_set_stereo(data));
case SOUND_PCM_WRITE_CHANNELS:
- sq_fsync(file, file->f_dentry);
+ sq_fsync(file, file->f_path.dentry);
IOCTL_IN(arg, data);
return IOCTL_OUT(arg, sound_set_stereo(data-1)+1);
case SNDCTL_DSP_SETFMT:
- sq_fsync(file, file->f_dentry);
+ sq_fsync(file, file->f_path.dentry);
IOCTL_IN(arg, data);
return IOCTL_OUT(arg, sound_set_format(data));
case SNDCTL_DSP_GETFMTS:
/* Initialize beep stuff */
orig_mksound = kd_mksound;
kd_mksound = cs_mksound;
- beep_buf = (short *) kmalloc(BEEP_BUFLEN * 4, GFP_KERNEL);
+ beep_buf = kmalloc(BEEP_BUFLEN * 4, GFP_KERNEL);
if (beep_buf == NULL)
printk(KERN_WARNING "dmasound: no memory for "
"beep buffer\n");
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default y
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_HWEIGHT
bool
default y
bool
default y
+config GENERIC_BUG
+ bool
+ default y
+ depends on BUG
+
source "init/Kconfig"
menu "Processor"
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
- depends HDPU
+ depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
config LITE5200B
bool "Freescale LITE5200B"
- depends LITE5200
+ depends on LITE5200
help
Support for the LITE5200B dev board for the MPC5200 from Freescale.
This is the new board with 2 PCI slots.
static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
- unsigned long *offset,
+ resource_size_t *offset,
enum pci_mmap_state mmap_state)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
/* If memory, add on the PCI bridge address offset */
if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
*offset += hose->pci_mem_offset;
+#endif
res_bit = IORESOURCE_MEM;
} else {
io_offset = hose->io_base_virt - ___IO_BASE;
enum pci_mmap_state mmap_state,
int write_combine)
{
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
struct resource *rp;
int ret;
resource_size_t *start, resource_size_t *end)
{
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
- unsigned long offset = 0;
+ resource_size_t offset = 0;
if (hose == NULL)
return;
if (rsrc->flags & IORESOURCE_IO)
- offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys;
+ offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+
+ /* We pass a fully fixed up address to userland for MMIO instead of
+ * a BAR value because X is lame and expects to be able to use that
+ * to pass to /dev/mem !
+ *
+ * That means that we'll have potentially 64 bits values where some
+ * userland apps only expect 32 (like X itself since it thinks only
+ * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+ * 32 bits CHRPs :-(
+ *
+ * Hopefully, the sysfs insterface is immune to that gunk. Once X
+ * has been fixed (and the fix spread enough), we can re-enable the
+ * 2 lines below and pass down a BAR value to userland. In that case
+ * we'll also have to re-enable the matching code in
+ * __pci_mmap_make_offset().
+ *
+ * BenH.
+ */
+#if 0
+ else if (rsrc->flags & IORESOURCE_MEM)
+ offset = hose->pci_mem_offset;
+#endif
- *start = rsrc->start + offset;
- *end = rsrc->end + offset;
+ *start = rsrc->start - offset;
+ *end = rsrc->end - offset;
}
-void __init
-pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
- int flags, char *name)
+void __init pci_init_resource(struct resource *res, resource_size_t start,
+ resource_size_t end, int flags, char *name)
{
res->start = start;
res->end = end;
#include <linux/init.h>
#include <linux/module.h>
#include <linux/prctl.h>
+#include <linux/bug.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
}
}
-/*
- * Look through the list of trap instructions that are used for BUG(),
- * BUG_ON() and WARN_ON() and see if we hit one. At this point we know
- * that the exception was caused by a trap instruction of some kind.
- * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0
- * otherwise.
- */
-extern struct bug_entry __start___bug_table[], __stop___bug_table[];
-
-#ifndef CONFIG_MODULES
-#define module_find_bug(x) NULL
-#endif
-
-struct bug_entry *find_bug(unsigned long bugaddr)
-{
- struct bug_entry *bug;
-
- for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
- if (bugaddr == bug->bug_addr)
- return bug;
- return module_find_bug(bugaddr);
-}
-
-int check_bug_trap(struct pt_regs *regs)
+int is_valid_bugaddr(unsigned long addr)
{
- struct bug_entry *bug;
- unsigned long addr;
-
- if (regs->msr & MSR_PR)
- return 0; /* not in kernel */
- addr = regs->nip; /* address of trap instruction */
- if (addr < PAGE_OFFSET)
- return 0;
- bug = find_bug(regs->nip);
- if (bug == NULL)
- return 0;
- if (bug->line & BUG_WARNING_TRAP) {
- /* this is a WARN_ON rather than BUG/BUG_ON */
-#ifdef CONFIG_XMON
- xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n",
- bug->function, bug->file,
- bug->line & ~BUG_WARNING_TRAP);
-#endif /* CONFIG_XMON */
- printk(KERN_ERR "Badness in %s at %s:%ld\n",
- bug->function, bug->file,
- bug->line & ~BUG_WARNING_TRAP);
- dump_stack();
- return 1;
- }
-#ifdef CONFIG_XMON
- xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
- bug->function, bug->file, bug->line);
- xmon(regs);
-#endif /* CONFIG_XMON */
- printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
- bug->function, bug->file, bug->line);
-
- return 0;
+ return addr >= PAGE_OFFSET;
}
void program_check_exception(struct pt_regs *regs)
/* trap exception */
if (debugger_bpt(regs))
return;
- if (check_bug_trap(regs)) {
+
+ if (!(regs->msr & MSR_PR) && /* not user-mode */
+ report_bug(regs->nip) == BUG_TRAP_TYPE_WARN) {
regs->nip += 4;
return;
}
# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
config 403GCX
bool
- depends OAK
+ depends on OAK
default y
config 405EP
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config GENERIC_HWEIGHT
bool
default y
This allows you to specify the maximum frame size a function may
have without the compiler complaining about it.
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
source "mm/Kconfig"
+config HOLES_IN_ZONE
+ def_bool y
+
comment "I/O subsystem configuration"
config MACHCHK_WARNING
If unsure, say Y.
-config QDIO_PERF_STATS
- bool "Performance statistics in /proc"
- depends on QDIO
- help
- Say Y here to get performance statistics in /proc/qdio_perf
-
- If unsure, say N.
-
config QDIO_DEBUG
bool "Extended debugging information"
depends on QDIO
config APPLDATA_MEM
tristate "Monitor memory management statistics"
- depends on APPLDATA_BASE
+ depends on APPLDATA_BASE && VM_EVENT_COUNTERS
help
This provides memory management related data to the Linux - VM Monitor
Stream, like paging/swapping rate, memory utilisation, etc.
#
CONFIG_MACHCHK_WARNING=y
CONFIG_QDIO=y
-# CONFIG_QDIO_PERF_STATS is not set
# CONFIG_QDIO_DEBUG is not set
#
static int hypfs_open(struct inode *inode, struct file *filp)
{
- char *data = filp->f_dentry->d_inode->i_private;
+ char *data = filp->f_path.dentry->d_inode->i_private;
struct hypfs_sb_info *fs_info;
if (filp->f_mode & FMODE_WRITE) {
struct hypfs_sb_info *fs_info;
size_t count = iov_length(iov, nr_segs);
- sb = iocb->ki_filp->f_dentry->d_inode->i_sb;
+ sb = iocb->ki_filp->f_path.dentry->d_inode->i_sb;
fs_info = sb->s_fs_info;
/*
* Currently we only allow one update per second for two reasons:
debug_entry_t*** areas;
int i,j;
- areas = (debug_entry_t ***) kmalloc(nr_areas *
+ areas = kmalloc(nr_areas *
sizeof(debug_entry_t**),
GFP_KERNEL);
if (!areas)
goto fail_malloc_areas;
for (i = 0; i < nr_areas; i++) {
- areas[i] = (debug_entry_t**) kmalloc(pages_per_area *
+ areas[i] = kmalloc(pages_per_area *
sizeof(debug_entry_t*),GFP_KERNEL);
if (!areas[i]) {
goto fail_malloc_areas2;
/* alloc everything */
- rc = (debug_info_t*) kmalloc(sizeof(debug_info_t), GFP_KERNEL);
+ rc = kmalloc(sizeof(debug_info_t), GFP_KERNEL);
if(!rc)
goto fail_malloc_rc;
rc->active_entries = kcalloc(nr_areas, sizeof(int), GFP_KERNEL);
debug_info_t *debug_info, *debug_info_snapshot;
down(&debug_lock);
- debug_info = file->f_dentry->d_inode->i_private;
+ debug_info = file->f_path.dentry->d_inode->i_private;
/* find debug view */
for (i = 0; i < DEBUG_MAX_VIEWS; i++) {
if (!debug_info->views[i])
continue;
else if (debug_info->debugfs_entries[i] ==
- file->f_dentry) {
+ file->f_path.dentry) {
goto found; /* found view ! */
}
}
rc = -ENOMEM;
goto out;
}
- p_info = (file_private_info_t *) kmalloc(sizeof(file_private_info_t),
+ p_info = kmalloc(sizeof(file_private_info_t),
GFP_KERNEL);
if(!p_info){
if(debug_info_snapshot)
ext_int_info_t *p;
int index;
- p = (ext_int_info_t *) kmalloc(sizeof(ext_int_info_t), GFP_ATOMIC);
+ p = kmalloc(sizeof(ext_int_info_t), GFP_ATOMIC);
if (p == NULL)
return -ENOMEM;
p->code = code;
unsigned int console_irq = -1;
unsigned long machine_flags = 0;
-struct mem_chunk memory_chunk[MEMORY_CHUNKS];
+struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
-unsigned long __initdata zholes_size[MAX_NR_ZONES];
static unsigned long __initdata memory_end;
/*
*/
void (*pm_power_off)(void) = machine_power_off;
-static void __init
-add_memory_hole(unsigned long start, unsigned long end)
-{
- unsigned long dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT;
-
- if (end <= dma_pfn)
- zholes_size[ZONE_DMA] += end - start + 1;
- else if (start > dma_pfn)
- zholes_size[ZONE_NORMAL] += end - start + 1;
- else {
- zholes_size[ZONE_DMA] += dma_pfn - start + 1;
- zholes_size[ZONE_NORMAL] += end - dma_pfn;
- }
-}
-
static int __init early_parse_mem(char *p)
{
memory_end = memparse(p, &p);
{
unsigned long bootmap_size;
unsigned long start_pfn, end_pfn, init_pfn;
- unsigned long last_rw_end;
int i;
/*
/*
* Register RAM areas with the bootmem allocator.
*/
- last_rw_end = start_pfn;
for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
- unsigned long start_chunk, end_chunk;
+ unsigned long start_chunk, end_chunk, pfn;
if (memory_chunk[i].type != CHUNK_READ_WRITE)
continue;
- start_chunk = (memory_chunk[i].addr + PAGE_SIZE - 1);
- start_chunk >>= PAGE_SHIFT;
- end_chunk = (memory_chunk[i].addr + memory_chunk[i].size);
- end_chunk >>= PAGE_SHIFT;
- if (start_chunk < start_pfn)
- start_chunk = start_pfn;
- if (end_chunk > end_pfn)
- end_chunk = end_pfn;
- if (start_chunk < end_chunk) {
- /* Initialize storage key for RAM pages */
- for (init_pfn = start_chunk ; init_pfn < end_chunk;
- init_pfn++)
- page_set_storage_key(init_pfn << PAGE_SHIFT,
- PAGE_DEFAULT_KEY);
- free_bootmem(start_chunk << PAGE_SHIFT,
- (end_chunk - start_chunk) << PAGE_SHIFT);
- if (last_rw_end < start_chunk)
- add_memory_hole(last_rw_end, start_chunk - 1);
- last_rw_end = end_chunk;
- }
+ start_chunk = PFN_DOWN(memory_chunk[i].addr);
+ end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1;
+ end_chunk = min(end_chunk, end_pfn);
+ if (start_chunk >= end_chunk)
+ continue;
+ add_active_range(0, start_chunk, end_chunk);
+ pfn = max(start_chunk, start_pfn);
+ for (; pfn <= end_chunk; pfn++)
+ page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY);
}
psw_set_key(PAGE_DEFAULT_KEY);
- if (last_rw_end < end_pfn - 1)
- add_memory_hole(last_rw_end, end_pfn - 1);
+ free_bootmem_with_active_regions(0, max_pfn);
+ reserve_bootmem(0, PFN_PHYS(start_pfn));
/*
* Reserve the bootmem bitmap itself as well. We do this in two
*/
#include <linux/errno.h>
-#include <asm/uaccess.h>
#include <linux/mm.h>
+#include <asm/uaccess.h>
#include <asm/futex.h>
static inline int __handle_fault(struct mm_struct *mm, unsigned long address,
out_of_memory:
up_read(&mm->mmap_sem);
- if (current->pid == 1) {
+ if (is_init(current)) {
yield();
+ down_read(&mm->mmap_sem);
goto survive;
}
printk("VM: killing process %s\n", current->comm);
# Makefile for the linux s390-specific parts of the memory manager.
#
-obj-y := init.o fault.o ioremap.o extmem.o mmap.o
+obj-y := init.o fault.o ioremap.o extmem.o mmap.o vmem.o
obj-$(CONFIG_CMM) += cmm.o
#include <linux/bootmem.h>
#include <linux/ctype.h>
#include <asm/page.h>
+#include <asm/pgtable.h>
#include <asm/ebcdic.h>
#include <asm/errno.h>
#include <asm/extmem.h>
}
/*
- * check if the given segment collides with guest storage.
- * returns 1 if this is the case, 0 if no collision was found
- */
-static int
-segment_overlaps_storage(struct dcss_segment *seg)
-{
- int i;
-
- for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
- if (memory_chunk[i].type != CHUNK_READ_WRITE)
- continue;
- if ((memory_chunk[i].addr >> 20) > (seg->end >> 20))
- continue;
- if (((memory_chunk[i].addr + memory_chunk[i].size - 1) >> 20)
- < (seg->start_addr >> 20))
- continue;
- return 1;
- }
- return 0;
-}
-
-/*
- * check if segment collides with other segments that are currently loaded
- * returns 1 if this is the case, 0 if no collision was found
- */
-static int
-segment_overlaps_others (struct dcss_segment *seg)
-{
- struct list_head *l;
- struct dcss_segment *tmp;
-
- BUG_ON(!mutex_is_locked(&dcss_lock));
- list_for_each(l, &dcss_list) {
- tmp = list_entry(l, struct dcss_segment, list);
- if ((tmp->start_addr >> 20) > (seg->end >> 20))
- continue;
- if ((tmp->end >> 20) < (seg->start_addr >> 20))
- continue;
- if (seg == tmp)
- continue;
- return 1;
- }
- return 0;
-}
-
-/*
- * check if segment exceeds the kernel mapping range (detected or set via mem=)
- * returns 1 if this is the case, 0 if segment fits into the range
- */
-static inline int
-segment_exceeds_range (struct dcss_segment *seg)
-{
- int seg_last_pfn = (seg->end) >> PAGE_SHIFT;
- if (seg_last_pfn > max_pfn)
- return 1;
- return 0;
-}
-
-/*
* get info about a segment
* possible return values:
* -ENOSYS : we are not running on VM
rc = query_segment_type (seg);
if (rc < 0)
goto out_free;
- if (segment_exceeds_range(seg)) {
- PRINT_WARN ("segment_load: not loading segment %s - exceeds"
- " kernel mapping range\n",name);
- rc = -ERANGE;
+
+ rc = add_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);
+
+ switch (rc) {
+ case 0:
+ break;
+ case -ENOSPC:
+ PRINT_WARN("segment_load: not loading segment %s - overlaps "
+ "storage/segment\n", name);
goto out_free;
- }
- if (segment_overlaps_storage(seg)) {
- PRINT_WARN ("segment_load: not loading segment %s - overlaps"
- " storage\n",name);
- rc = -ENOSPC;
+ case -ERANGE:
+ PRINT_WARN("segment_load: not loading segment %s - exceeds "
+ "kernel mapping range\n", name);
goto out_free;
- }
- if (segment_overlaps_others(seg)) {
- PRINT_WARN ("segment_load: not loading segment %s - overlaps"
- " other segments\n",name);
- rc = -EBUSY;
+ default:
+ PRINT_WARN("segment_load: not loading segment %s (rc: %d)\n",
+ name, rc);
goto out_free;
}
+
if (do_nonshared)
dcss_command = DCSS_LOADNSR;
else
rc = dcss_diag_translate_rc (seg->end);
dcss_diag(DCSS_PURGESEG, seg->dcss_name,
&seg->start_addr, &seg->end);
- goto out_free;
+ goto out_shared;
}
seg->do_nonshared = do_nonshared;
atomic_set(&seg->ref_count, 1);
(void*)seg->start_addr, (void*)seg->end,
segtype_string[seg->vm_segtype]);
goto out;
+ out_shared:
+ remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);
out_free:
kfree(seg);
out:
"please report to linux390@de.ibm.com\n",name);
goto out_unlock;
}
- if (atomic_dec_return(&seg->ref_count) == 0) {
- list_del(&seg->list);
- dcss_diag(DCSS_PURGESEG, seg->dcss_name,
- &dummy, &dummy);
- kfree(seg);
- }
+ if (atomic_dec_return(&seg->ref_count) != 0)
+ goto out_unlock;
+ remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);
+ list_del(&seg->list);
+ dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);
+ kfree(seg);
out_unlock:
mutex_unlock(&dcss_lock);
}
#include <linux/pagemap.h>
#include <linux/bootmem.h>
#include <linux/pfn.h>
+#include <linux/poison.h>
#include <asm/processor.h>
#include <asm/system.h>
printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
i = max_mapnr;
while (i-- > 0) {
+ if (!pfn_valid(i))
+ continue;
page = pfn_to_page(i);
total++;
if (PageReserved(page))
printk("%d pages swap cached\n",cached);
}
-extern unsigned long __initdata zholes_size[];
-/*
- * paging_init() sets up the page tables
- */
-
-#ifndef CONFIG_64BIT
-void __init paging_init(void)
+static void __init setup_ro_region(void)
{
- pgd_t * pg_dir;
- pte_t * pg_table;
- pte_t pte;
- int i;
- unsigned long tmp;
- unsigned long pfn = 0;
- unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERNSEG_TABLE;
- static const int ssm_mask = 0x04000000L;
- unsigned long ro_start_pfn, ro_end_pfn;
- unsigned long zones_size[MAX_NR_ZONES];
-
- ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata);
- ro_end_pfn = PFN_UP((unsigned long)&__end_rodata);
-
- memset(zones_size, 0, sizeof(zones_size));
- zones_size[ZONE_DMA] = max_low_pfn;
- free_area_init_node(0, &contig_page_data, zones_size,
- __pa(PAGE_OFFSET) >> PAGE_SHIFT,
- zholes_size);
-
- /* unmap whole virtual address space */
-
- pg_dir = swapper_pg_dir;
-
- for (i = 0; i < PTRS_PER_PGD; i++)
- pmd_clear((pmd_t *) pg_dir++);
-
- /*
- * map whole physical memory to virtual memory (identity mapping)
- */
-
- pg_dir = swapper_pg_dir;
-
- while (pfn < max_low_pfn) {
- /*
- * pg_table is physical at this point
- */
- pg_table = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
-
- pmd_populate_kernel(&init_mm, (pmd_t *) pg_dir, pg_table);
- pg_dir++;
-
- for (tmp = 0 ; tmp < PTRS_PER_PTE ; tmp++,pg_table++) {
- if (pfn >= ro_start_pfn && pfn < ro_end_pfn)
- pte = pfn_pte(pfn, __pgprot(_PAGE_RO));
- else
- pte = pfn_pte(pfn, PAGE_KERNEL);
- if (pfn >= max_low_pfn)
- pte_val(pte) = _PAGE_TYPE_EMPTY;
- set_pte(pg_table, pte);
- pfn++;
- }
- }
-
- S390_lowcore.kernel_asce = pgdir_k;
-
- /* enable virtual mapping in kernel mode */
- __ctl_load(pgdir_k, 1, 1);
- __ctl_load(pgdir_k, 7, 7);
- __ctl_load(pgdir_k, 13, 13);
- __raw_local_irq_ssm(ssm_mask);
-
- local_flush_tlb();
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ pte_t new_pte;
+ unsigned long address, end;
+
+ address = ((unsigned long)&__start_rodata) & PAGE_MASK;
+ end = PFN_ALIGN((unsigned long)&__end_rodata);
+
+ for (; address < end; address += PAGE_SIZE) {
+ pgd = pgd_offset_k(address);
+ pmd = pmd_offset(pgd, address);
+ pte = pte_offset_kernel(pmd, address);
+ new_pte = mk_pte_phys(address, __pgprot(_PAGE_RO));
+ set_pte(pte, new_pte);
+ }
}
-#else /* CONFIG_64BIT */
+extern void vmem_map_init(void);
+/*
+ * paging_init() sets up the page tables
+ */
void __init paging_init(void)
{
- pgd_t * pg_dir;
- pmd_t * pm_dir;
- pte_t * pt_dir;
- pte_t pte;
- int i,j,k;
- unsigned long pfn = 0;
- unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) |
- _KERN_REGION_TABLE;
+ pgd_t *pg_dir;
+ int i;
+ unsigned long pgdir_k;
static const int ssm_mask = 0x04000000L;
- unsigned long zones_size[MAX_NR_ZONES];
- unsigned long dma_pfn, high_pfn;
- unsigned long ro_start_pfn, ro_end_pfn;
-
- memset(zones_size, 0, sizeof(zones_size));
- dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT;
- high_pfn = max_low_pfn;
- ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata);
- ro_end_pfn = PFN_UP((unsigned long)&__end_rodata);
-
- if (dma_pfn > high_pfn)
- zones_size[ZONE_DMA] = high_pfn;
- else {
- zones_size[ZONE_DMA] = dma_pfn;
- zones_size[ZONE_NORMAL] = high_pfn - dma_pfn;
- }
-
- /* Initialize mem_map[]. */
- free_area_init_node(0, &contig_page_data, zones_size,
- __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
- /*
- * map whole physical memory to virtual memory (identity mapping)
- */
-
- pg_dir = swapper_pg_dir;
-
- for (i = 0 ; i < PTRS_PER_PGD ; i++,pg_dir++) {
+ pg_dir = swapper_pg_dir;
- if (pfn >= max_low_pfn) {
- pgd_clear(pg_dir);
- continue;
- }
-
- pm_dir = (pmd_t *) alloc_bootmem_pages(PAGE_SIZE * 4);
- pgd_populate(&init_mm, pg_dir, pm_dir);
-
- for (j = 0 ; j < PTRS_PER_PMD ; j++,pm_dir++) {
- if (pfn >= max_low_pfn) {
- pmd_clear(pm_dir);
- continue;
- }
-
- pt_dir = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
- pmd_populate_kernel(&init_mm, pm_dir, pt_dir);
-
- for (k = 0 ; k < PTRS_PER_PTE ; k++,pt_dir++) {
- if (pfn >= ro_start_pfn && pfn < ro_end_pfn)
- pte = pfn_pte(pfn, __pgprot(_PAGE_RO));
- else
- pte = pfn_pte(pfn, PAGE_KERNEL);
- if (pfn >= max_low_pfn)
- pte_val(pte) = _PAGE_TYPE_EMPTY;
- set_pte(pt_dir, pte);
- pfn++;
- }
- }
- }
+#ifdef CONFIG_64BIT
+ pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERN_REGION_TABLE;
+ for (i = 0; i < PTRS_PER_PGD; i++)
+ pgd_clear(pg_dir + i);
+#else
+ pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERNSEG_TABLE;
+ for (i = 0; i < PTRS_PER_PGD; i++)
+ pmd_clear((pmd_t *)(pg_dir + i));
+#endif
+ vmem_map_init();
+ setup_ro_region();
S390_lowcore.kernel_asce = pgdir_k;
__ctl_load(pgdir_k, 13, 13);
__raw_local_irq_ssm(ssm_mask);
- local_flush_tlb();
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS);
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+ free_area_init_nodes(max_zone_pfns);
}
-#endif /* CONFIG_64BIT */
void __init mem_init(void)
{
printk("Write protected kernel read-only data: %#lx - %#lx\n",
(unsigned long)&__start_rodata,
PFN_ALIGN((unsigned long)&__end_rodata) - 1);
+ printk("Virtual memmap size: %ldk\n",
+ (max_pfn * sizeof(struct page)) >> 10);
}
void free_initmem(void)
for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
+ memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
free_page(addr);
totalram_pages++;
}
#include <linux/vmalloc.h>
#include <linux/mm.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/pgalloc.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
- unsigned long phys_addr, unsigned long flags)
-{
- unsigned long end;
- unsigned long pfn;
-
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- if (address >= end)
- BUG();
- pfn = phys_addr >> PAGE_SHIFT;
- do {
- if (!pte_none(*pte)) {
- printk("remap_area_pte: page already exists\n");
- BUG();
- }
- set_pte(pte, pfn_pte(pfn, __pgprot(flags)));
- address += PAGE_SIZE;
- pfn++;
- pte++;
- } while (address && (address < end));
-}
-
-static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
- unsigned long phys_addr, unsigned long flags)
-{
- unsigned long end;
-
- address &= ~PGDIR_MASK;
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
- phys_addr -= address;
- if (address >= end)
- BUG();
- do {
- pte_t * pte = pte_alloc_kernel(pmd, address);
- if (!pte)
- return -ENOMEM;
- remap_area_pte(pte, address, end - address, address + phys_addr, flags);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address && (address < end));
- return 0;
-}
-
-static int remap_area_pages(unsigned long address, unsigned long phys_addr,
- unsigned long size, unsigned long flags)
-{
- int error;
- pgd_t * dir;
- unsigned long end = address + size;
-
- phys_addr -= address;
- dir = pgd_offset(&init_mm, address);
- flush_cache_all();
- if (address >= end)
- BUG();
- do {
- pmd_t *pmd;
- pmd = pmd_alloc(&init_mm, dir, address);
- error = -ENOMEM;
- if (!pmd)
- break;
- if (remap_area_pmd(pmd, address, end - address,
- phys_addr + address, flags))
- break;
- error = 0;
- address = (address + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- } while (address && (address < end));
- flush_tlb_all();
- return 0;
-}
/*
* Generic mapping function (not visible outside):
if (!area)
return NULL;
addr = area->addr;
- if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
+ if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
+ phys_addr, __pgprot(flags))) {
vfree(addr);
return NULL;
}
--- /dev/null
+/*
+ * arch/s390/mm/vmem.c
+ *
+ * Copyright IBM Corp. 2006
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+#include <asm/tlbflush.h>
+
+unsigned long vmalloc_end;
+EXPORT_SYMBOL(vmalloc_end);
+
+static struct page *vmem_map;
+static DEFINE_MUTEX(vmem_mutex);
+
+struct memory_segment {
+ struct list_head list;
+ unsigned long start;
+ unsigned long size;
+};
+
+static LIST_HEAD(mem_segs);
+
+void memmap_init(unsigned long size, int nid, unsigned long zone,
+ unsigned long start_pfn)
+{
+ struct page *start, *end;
+ struct page *map_start, *map_end;
+ int i;
+
+ start = pfn_to_page(start_pfn);
+ end = start + size;
+
+ for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
+ unsigned long cstart, cend;
+
+ cstart = PFN_DOWN(memory_chunk[i].addr);
+ cend = cstart + PFN_DOWN(memory_chunk[i].size);
+
+ map_start = mem_map + cstart;
+ map_end = mem_map + cend;
+
+ if (map_start < start)
+ map_start = start;
+ if (map_end > end)
+ map_end = end;
+
+ map_start -= ((unsigned long) map_start & (PAGE_SIZE - 1))
+ / sizeof(struct page);
+ map_end += ((PFN_ALIGN((unsigned long) map_end)
+ - (unsigned long) map_end)
+ / sizeof(struct page));
+
+ if (map_start < map_end)
+ memmap_init_zone((unsigned long)(map_end - map_start),
+ nid, zone, page_to_pfn(map_start));
+ }
+}
+
+static inline void *vmem_alloc_pages(unsigned int order)
+{
+ if (slab_is_available())
+ return (void *)__get_free_pages(GFP_KERNEL, order);
+ return alloc_bootmem_pages((1 << order) * PAGE_SIZE);
+}
+
+static inline pmd_t *vmem_pmd_alloc(void)
+{
+ pmd_t *pmd;
+ int i;
+
+ pmd = vmem_alloc_pages(PMD_ALLOC_ORDER);
+ if (!pmd)
+ return NULL;
+ for (i = 0; i < PTRS_PER_PMD; i++)
+ pmd_clear(pmd + i);
+ return pmd;
+}
+
+static inline pte_t *vmem_pte_alloc(void)
+{
+ pte_t *pte;
+ pte_t empty_pte;
+ int i;
+
+ pte = vmem_alloc_pages(PTE_ALLOC_ORDER);
+ if (!pte)
+ return NULL;
+ pte_val(empty_pte) = _PAGE_TYPE_EMPTY;
+ for (i = 0; i < PTRS_PER_PTE; i++)
+ set_pte(pte + i, empty_pte);
+ return pte;
+}
+
+/*
+ * Add a physical memory range to the 1:1 mapping.
+ */
+static int vmem_add_range(unsigned long start, unsigned long size)
+{
+ unsigned long address;
+ pgd_t *pg_dir;
+ pmd_t *pm_dir;
+ pte_t *pt_dir;
+ pte_t pte;
+ int ret = -ENOMEM;
+
+ for (address = start; address < start + size; address += PAGE_SIZE) {
+ pg_dir = pgd_offset_k(address);
+ if (pgd_none(*pg_dir)) {
+ pm_dir = vmem_pmd_alloc();
+ if (!pm_dir)
+ goto out;
+ pgd_populate(&init_mm, pg_dir, pm_dir);
+ }
+
+ pm_dir = pmd_offset(pg_dir, address);
+ if (pmd_none(*pm_dir)) {
+ pt_dir = vmem_pte_alloc();
+ if (!pt_dir)
+ goto out;
+ pmd_populate_kernel(&init_mm, pm_dir, pt_dir);
+ }
+
+ pt_dir = pte_offset_kernel(pm_dir, address);
+ pte = pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL);
+ set_pte(pt_dir, pte);
+ }
+ ret = 0;
+out:
+ flush_tlb_kernel_range(start, start + size);
+ return ret;
+}
+
+/*
+ * Remove a physical memory range from the 1:1 mapping.
+ * Currently only invalidates page table entries.
+ */
+static void vmem_remove_range(unsigned long start, unsigned long size)
+{
+ unsigned long address;
+ pgd_t *pg_dir;
+ pmd_t *pm_dir;
+ pte_t *pt_dir;
+ pte_t pte;
+
+ pte_val(pte) = _PAGE_TYPE_EMPTY;
+ for (address = start; address < start + size; address += PAGE_SIZE) {
+ pg_dir = pgd_offset_k(address);
+ if (pgd_none(*pg_dir))
+ continue;
+ pm_dir = pmd_offset(pg_dir, address);
+ if (pmd_none(*pm_dir))
+ continue;
+ pt_dir = pte_offset_kernel(pm_dir, address);
+ set_pte(pt_dir, pte);
+ }
+ flush_tlb_kernel_range(start, start + size);
+}
+
+/*
+ * Add a backed mem_map array to the virtual mem_map array.
+ */
+static int vmem_add_mem_map(unsigned long start, unsigned long size)
+{
+ unsigned long address, start_addr, end_addr;
+ struct page *map_start, *map_end;
+ pgd_t *pg_dir;
+ pmd_t *pm_dir;
+ pte_t *pt_dir;
+ pte_t pte;
+ int ret = -ENOMEM;
+
+ map_start = vmem_map + PFN_DOWN(start);
+ map_end = vmem_map + PFN_DOWN(start + size);
+
+ start_addr = (unsigned long) map_start & PAGE_MASK;
+ end_addr = PFN_ALIGN((unsigned long) map_end);
+
+ for (address = start_addr; address < end_addr; address += PAGE_SIZE) {
+ pg_dir = pgd_offset_k(address);
+ if (pgd_none(*pg_dir)) {
+ pm_dir = vmem_pmd_alloc();
+ if (!pm_dir)
+ goto out;
+ pgd_populate(&init_mm, pg_dir, pm_dir);
+ }
+
+ pm_dir = pmd_offset(pg_dir, address);
+ if (pmd_none(*pm_dir)) {
+ pt_dir = vmem_pte_alloc();
+ if (!pt_dir)
+ goto out;
+ pmd_populate_kernel(&init_mm, pm_dir, pt_dir);
+ }
+
+ pt_dir = pte_offset_kernel(pm_dir, address);
+ if (pte_none(*pt_dir)) {
+ unsigned long new_page;
+
+ new_page =__pa(vmem_alloc_pages(0));
+ if (!new_page)
+ goto out;
+ pte = pfn_pte(new_page >> PAGE_SHIFT, PAGE_KERNEL);
+ set_pte(pt_dir, pte);
+ }
+ }
+ ret = 0;
+out:
+ flush_tlb_kernel_range(start_addr, end_addr);
+ return ret;
+}
+
+static int vmem_add_mem(unsigned long start, unsigned long size)
+{
+ int ret;
+
+ ret = vmem_add_range(start, size);
+ if (ret)
+ return ret;
+ return vmem_add_mem_map(start, size);
+}
+
+/*
+ * Add memory segment to the segment list if it doesn't overlap with
+ * an already present segment.
+ */
+static int insert_memory_segment(struct memory_segment *seg)
+{
+ struct memory_segment *tmp;
+
+ if (PFN_DOWN(seg->start + seg->size) > max_pfn ||
+ seg->start + seg->size < seg->start)
+ return -ERANGE;
+
+ list_for_each_entry(tmp, &mem_segs, list) {
+ if (seg->start >= tmp->start + tmp->size)
+ continue;
+ if (seg->start + seg->size <= tmp->start)
+ continue;
+ return -ENOSPC;
+ }
+ list_add(&seg->list, &mem_segs);
+ return 0;
+}
+
+/*
+ * Remove memory segment from the segment list.
+ */
+static void remove_memory_segment(struct memory_segment *seg)
+{
+ list_del(&seg->list);
+}
+
+static void __remove_shared_memory(struct memory_segment *seg)
+{
+ remove_memory_segment(seg);
+ vmem_remove_range(seg->start, seg->size);
+}
+
+int remove_shared_memory(unsigned long start, unsigned long size)
+{
+ struct memory_segment *seg;
+ int ret;
+
+ mutex_lock(&vmem_mutex);
+
+ ret = -ENOENT;
+ list_for_each_entry(seg, &mem_segs, list) {
+ if (seg->start == start && seg->size == size)
+ break;
+ }
+
+ if (seg->start != start || seg->size != size)
+ goto out;
+
+ ret = 0;
+ __remove_shared_memory(seg);
+ kfree(seg);
+out:
+ mutex_unlock(&vmem_mutex);
+ return ret;
+}
+
+int add_shared_memory(unsigned long start, unsigned long size)
+{
+ struct memory_segment *seg;
+ struct page *page;
+ unsigned long pfn, num_pfn, end_pfn;
+ int ret;
+
+ mutex_lock(&vmem_mutex);
+ ret = -ENOMEM;
+ seg = kzalloc(sizeof(*seg), GFP_KERNEL);
+ if (!seg)
+ goto out;
+ seg->start = start;
+ seg->size = size;
+
+ ret = insert_memory_segment(seg);
+ if (ret)
+ goto out_free;
+
+ ret = vmem_add_mem(start, size);
+ if (ret)
+ goto out_remove;
+
+ pfn = PFN_DOWN(start);
+ num_pfn = PFN_DOWN(size);
+ end_pfn = pfn + num_pfn;
+
+ page = pfn_to_page(pfn);
+ memset(page, 0, num_pfn * sizeof(struct page));
+
+ for (; pfn < end_pfn; pfn++) {
+ page = pfn_to_page(pfn);
+ init_page_count(page);
+ reset_page_mapcount(page);
+ SetPageReserved(page);
+ INIT_LIST_HEAD(&page->lru);
+ }
+ goto out;
+
+out_remove:
+ __remove_shared_memory(seg);
+out_free:
+ kfree(seg);
+out:
+ mutex_unlock(&vmem_mutex);
+ return ret;
+}
+
+/*
+ * map whole physical memory to virtual memory (identity mapping)
+ */
+void __init vmem_map_init(void)
+{
+ unsigned long map_size;
+ int i;
+
+ map_size = ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) * sizeof(struct page);
+ vmalloc_end = PFN_ALIGN(VMALLOC_END_INIT) - PFN_ALIGN(map_size);
+ vmem_map = (struct page *) vmalloc_end;
+ NODE_DATA(0)->node_mem_map = vmem_map;
+
+ for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++)
+ vmem_add_mem(memory_chunk[i].addr, memory_chunk[i].size);
+}
+
+/*
+ * Convert memory chunk array to a memory segment list so there is a single
+ * list that contains both r/w memory and shared memory segments.
+ */
+static int __init vmem_convert_memory_chunk(void)
+{
+ struct memory_segment *seg;
+ int i;
+
+ mutex_lock(&vmem_mutex);
+ for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
+ if (!memory_chunk[i].size)
+ continue;
+ seg = kzalloc(sizeof(*seg), GFP_KERNEL);
+ if (!seg)
+ panic("Out of memory...\n");
+ seg->start = memory_chunk[i].addr;
+ seg->size = memory_chunk[i].size;
+ insert_memory_segment(seg);
+ }
+ mutex_unlock(&vmem_mutex);
+ return 0;
+}
+
+core_initcall(vmem_convert_memory_chunk);
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
source "init/Kconfig"
menu "System type"
int "CPU Mode Pin Setting"
depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
help
- MD2 - MD0 Setting.
+ MD2 - MD0 pin setting.
menu "CPU Frequency scaling"
source "kernel/Kconfig.preempt"
-config CPU_HAS_SR_RB
- bool "CPU has SR.RB"
- depends on CPU_SH3 || CPU_SH4
- default y
- help
- This will enable the use of SR.RB register bank usage. Processors
- that are lacking this bit must have another method in place for
- accomplishing what is taken care of by the banked registers.
-
- See <file:Documentation/sh/register-banks.txt> for further
- information on SR.RB and register banking in the kernel in general.
-
config NODES_SHIFT
int
default "1"
hex "SCIF port for early console"
depends on EARLY_SCIF_CONSOLE
default "0xffe00000" if CPU_SUBTYPE_SH7780
- default "0xfffe9800" if CPU_SUBTYPE_SH72060
+ default "0xfffe9800" if CPU_SUBTYPE_SH7206
+ default "0xf8420000" if CPU_SUBTYPE_SH7619
default "0xffe80000" if CPU_SH4
config EARLY_PRINTK
all: zImage
-zImage: vmlinux
+zImage uImage uImage.srec vmlinux.srec: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
compressed: zImage
CLEAN_FILES += include/asm-sh/machtypes.h
define archhelp
- @echo ' zImage - Compressed kernel image (arch/sh/boot/zImage)'
+ @echo '* zImage - Compressed kernel image'
+ @echo ' vmlinux.srec - Create an ELF S-record'
+ @echo ' uImage - Create a bootable image for U-Boot'
+ @echo ' uImage.srec - Create an S-record for U-Boot'
endef
*/
#include <linux/init.h>
#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
#include <asm/landisk/iodata_landisk.h>
static void enable_landisk_irq(unsigned int irq);
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <asm/se7206.h>
#define INTSTS0 0x31800000
#define INTMSK1 0x31800006
#define INTSEL 0x31800008
+#define IRQ0_IRQ 64
+#define IRQ1_IRQ 65
+#define IRQ3_IRQ 67
+
+#define INTC_IPR01 0xfffe0818
+#define INTC_ICR1 0xfffe0802
+
static void disable_se7206_irq(unsigned int irq)
{
unsigned short val;
case IRQ1_IRQ:
msk0 |= 0x000f;
break;
- case IRQ2_IRQ:
+ case IRQ3_IRQ:
msk0 |= 0x0f00;
msk1 |= 0x00ff;
break;
case IRQ1_IRQ:
msk0 &= ~0x000f;
break;
- case IRQ2_IRQ:
+ case IRQ3_IRQ:
msk0 &= ~0x0f00;
msk1 &= ~0x00ff;
break;
case IRQ1_IRQ:
sts0 &= ~0x000f;
break;
- case IRQ2_IRQ:
+ case IRQ3_IRQ:
sts0 &= ~0x0f00;
sts1 &= ~0x00ff;
break;
}
static struct irq_chip se7206_irq_chip __read_mostly = {
- .name = "SE7206-FPGA-IRQ",
+ .name = "SE7206-FPGA",
.mask = disable_se7206_irq,
.unmask = enable_se7206_irq,
.mask_ack = disable_se7206_irq,
# Makefile for the 7619 SolutionEngine specific parts of the kernel
#
-obj-y := setup.o io.o
+obj-y := setup.o
+++ /dev/null
-/*
- *
- * linux/arch/sh/boards/se/7619/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7619 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se7619.h>
-#include <asm/irq.h>
-
-/* FIXME: M3A-ZAB7 Compact Flash Slot support */
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000); /* Uncached ROM area (P2) */
-}
-
-#define badio(name,port) \
- printk("bad I/O operation (%s) for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
-unsigned char se7619___inb(unsigned long port)
-{
- badio(inb, port);
- return 0;
-}
-
-unsigned char se7619___inb_p(unsigned long port)
-{
- badio(inb_p, port);
- delay();
- return 0;
-}
-
-unsigned short se7619___inw(unsigned long port)
-{
- badio(inw, port);
- return 0;
-}
-
-unsigned int se7619___inl(unsigned long port)
-{
- badio(inl, port);
- return 0;
-}
-
-void se7619___outb(unsigned char value, unsigned long port)
-{
- badio(outb, port);
-}
-
-void se7619___outb_p(unsigned char value, unsigned long port)
-{
- badio(outb_p, port);
- delay();
-}
-
-void se7619___outw(unsigned short value, unsigned long port)
-{
- badio(outw, port);
-}
-
-void se7619___outl(unsigned int value, unsigned long port)
-{
- badio(outl, port);
-}
-
-void se7619___insb(unsigned long port, void *addr, unsigned long count)
-{
- badio(inw, port);
-}
-
-void se7619___insw(unsigned long port, void *addr, unsigned long count)
-{
- badio(inw, port);
-}
-
-void se7619___insl(unsigned long port, void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void se7619___outsb(unsigned long port, const void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void se7619___outsw(unsigned long port, const void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void se7619___outsl(unsigned long port, const void *addr, unsigned long count)
-{
- badio(outsw, port);
-}
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/io.h>
-#include <asm/se7619.h>
#include <asm/machvec.h>
/*
struct sh_machine_vector mv_se __initmv = {
.mv_name = "SolutionEngine",
.mv_nr_irqs = 108,
- .mv_inb = se7619___inb,
- .mv_inw = se7619___inw,
- .mv_inl = se7619___inl,
- .mv_outb = se7619___outb,
- .mv_outw = se7619___outw,
- .mv_outl = se7619___outl,
-
- .mv_inb_p = se7619___inb_p,
- .mv_inw_p = se7619___inw,
- .mv_inl_p = se7619___inl,
- .mv_outb_p = se7619___outb_p,
- .mv_outw_p = se7619___outw,
- .mv_outl_p = se7619___outl,
-
- .mv_insb = se7619___insb,
- .mv_insw = se7619___insw,
- .mv_insl = se7619___insl,
- .mv_outsb = se7619___outsb,
- .mv_outsw = se7619___outsw,
- .mv_outsl = se7619___outsl,
};
ALIAS_MV(se)
# Copyright (C) 1999 Stuart Menefy
#
-targets := zImage
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+#
+# Assign safe dummy values if these variables are not defined,
+# in order to suppress error message.
+#
+CONFIG_PAGE_OFFSET ?= 0x80000000
+CONFIG_MEMORY_START ?= 0x0c000000
+CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
+CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
+
+export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
+ CONFIG_ZERO_PAGE_OFFSET
+
+targets := zImage vmlinux.srec uImage uImage.srec
subdir- := compressed
$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
- @echo 'Kernel: $@ is ready'
+ @echo ' Kernel: $@ is ready'
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+KERNEL_LOAD := $(shell printf "0x%8x" $$[$(CONFIG_PAGE_OFFSET) + \
+ $(CONFIG_MEMORY_START) + \
+ $(CONFIG_ZERO_PAGE_OFFSET)+0x1000])
+
+quiet_cmd_uimage = UIMAGE $@
+ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
+ -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \
+ -n 'Linux-$(KERNELRELEASE)' -d $< $@
+
+$(obj)/uImage: $(obj)/zImage FORCE
+ $(call if_changed,uimage)
+ @echo ' Image $@ is ready'
+
+OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
+$(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_uImage.srec := -I binary -O srec
+$(obj)/uImage.srec: $(obj)/uImage
+ $(call if_changed,objcopy)
+
+clean-files += uImage uImage.srec vmlinux.srec
#
# IMAGE_OFFSET is the load offset of the compression loader
-# Assign dummy values if these 2 variables are not defined,
-# in order to suppress error message.
#
-CONFIG_PAGE_OFFSET ?= 0x80000000
-CONFIG_MEMORY_START ?= 0x0c000000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
-
IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_PAGE_OFFSET) + \
$(CONFIG_MEMORY_START) + \
$(CONFIG_BOOT_LINK_OFFSET)])
.text
#include <linux/linkage.h>
+#include <asm/page.h>
.global startup
startup:
decompress_kernel_addr:
.long decompress_kernel
kernel_start_addr:
- .long _text+0x1000
+ .long _text+PAGE_SIZE
.align 9
fake_headers_as_bzImage:
#include <asm/uaccess.h>
#include <asm/addrspace.h>
+#include <asm/page.h>
#ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h>
#endif
void decompress_kernel(void)
{
output_data = 0;
- output_ptr = P2SEGADDR((unsigned long)&_text+0x1000);
+ output_ptr = P2SEGADDR((unsigned long)&_text+PAGE_SIZE);
free_mem_ptr = (unsigned long)&_end;
free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 11:14:13 2006
+# Linux kernel version: 2.6.19
+# Thu Dec 7 17:13:04 2006
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SH_LANDISK=y
# CONFIG_SH_TITAN is not set
# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
# CONFIG_SH_UNKNOWN is not set
#
# SH-2 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
#
# SH-3 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
#
# SH4AL-DSP Processor Support
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
#
# Timer support
#
CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
#
#
# DMA support
#
-CONFIG_SH_DMA=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=4
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+# CONFIG_SH_DMA is not set
#
# Companion Chips
CONFIG_HEARTBEAT=y
#
+# Additional SuperH Device Drivers
+#
+# CONFIG_PUSH_SWITCH is not set
+
+#
# Kernel features
#
# CONFIG_HZ_100 is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
#
# CONFIG_ATA_OVER_ETH is not set
#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
#
# Dallas's 1-wire bus
#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Misc devices
-#
-
-#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB Imaging devices
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc4
-# Sun Nov 5 16:20:10 2006
+# Linux kernel version: 2.6.19
+# Wed Dec 6 14:40:15 2006
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
+CONFIG_BASE_SMALL=1
# CONFIG_SLOB is not set
#
#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
#
# SH4AL-DSP Processor Support
#
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# Processor features
#
# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_SH_FPU is not set
# CONFIG_SH_FPU_EMU is not set
# CONFIG_SH_DSP is not set
#
CONFIG_SH_CMT=y
# CONFIG_SH_MTU2 is not set
+CONFIG_SH_TIMER_IRQ=140
+# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
CONFIG_SH_CLK_MD=6
# CONFIG_HD6446X_SERIES is not set
#
+# Additional SuperH Device Drivers
+#
+# CONFIG_PUSH_SWITCH is not set
+
+#
# Kernel features
#
CONFIG_HZ_100=y
# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x1000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_MTD_SOLUTIONENGINE is not set
# CONFIG_MTD_UCLINUX is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Network device support
#
-# CONFIG_NETDEVICES is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Input device support
#
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
#
# IPMI
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Hardware Monitoring support
#
-CONFIG_HWMON=y
+# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
#
# File systems
#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
#
# Library routines
#
-CONFIG_CRC_CCITT=y
+# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19
+# Wed Dec 6 16:35:36 2006
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+CONFIG_SH_7619_SOLUTION_ENGINE=y
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH2=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+CONFIG_CPU_SUBTYPE_SH7619=y
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+
+#
+# Memory management options
+#
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_SH_WRITETHROUGH=y
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+# CONFIG_SH_DSP is not set
+
+#
+# Timer support
+#
+CONFIG_SH_CMT=y
+CONFIG_SH_TIMER_IRQ=86
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_SH_PCLK_FREQ=31250000
+CONFIG_SH_CLK_MD=5
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_KEXEC is not set
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xa0000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_SOLUTIONENGINE is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
#include <asm/push-switch.h>
#define DRV_NAME "push-switch"
-#define DRV_VERSION "0.1.0"
+#define DRV_VERSION "0.1.1"
static ssize_t switch_show(struct device *dev,
struct device_attribute *attr,
schedule_work(&psw->work);
}
-static void switch_work_handler(void *data)
+static void switch_work_handler(struct work_struct *work)
{
- struct platform_device *pdev = data;
- struct push_switch *psw = platform_get_drvdata(pdev);
+ struct push_switch *psw = container_of(work, struct push_switch, work);
+ struct platform_device *pdev = psw->pdev;
psw->state = 0;
}
}
- INIT_WORK(&psw->work, switch_work_handler, pdev);
+ INIT_WORK(&psw->work, switch_work_handler);
init_timer(&psw->debounce);
psw->debounce.function = switch_timer;
psw->debounce.data = (unsigned long)psw;
+ /* Workqueue API brain-damage */
+ psw->pdev = pdev;
+
platform_set_drvdata(pdev, psw);
return 0;
obj-$(CONFIG_CPU_SH2A) = sh2a/
obj-$(CONFIG_CPU_SH3) = sh3/
obj-$(CONFIG_CPU_SH4) = sh4/
+obj-$(CONFIG_CPU_SH4A) += sh4a/
obj-$(CONFIG_UBC_WAKEUP) += ubc.o
obj-$(CONFIG_SH_ADC) += adc.o
7: .long do_IRQ
8: .long do_exception_error
-trap_entry:
- add #-0x10,r9
+trap_entry:
+ /* verbose BUG trapa entry check */
+ mov #0x3e,r8
+ cmp/ge r8,r9
+ bf/s 1f
+ add #-0x10,r9
+ add #0x10,r9
+1:
shll2 r9 ! TRA
mov #OFF_TRA,r8
add r15,r8
mov.l r9,@r8
mov r9,r8
#ifdef CONFIG_TRACE_IRQFLAGS
- mov.l 5f, r9
+ mov.l 2f, r9
jsr @r9
nop
#endif
nop
.align 2
-1: .long syscall_exit
-2: .long break_point_trap_software
-3: .long NR_syscalls
-4: .long sys_call_table
#ifdef CONFIG_TRACE_IRQFLAGS
-5: .long trace_hardirqs_on
+2: .long trace_hardirqs_on
#endif
#if defined(CONFIG_SH_STANDARD_BIOS)
restore_all:
cli
#ifdef CONFIG_TRACE_IRQFLAGS
- mov.l 3f, r0
+ mov.l 1f, r0
jsr @r0
nop
#endif
mov.l @r15,r15
rte
nop
-2:
- mov.l 1f,r8
- mov.l 2f,r9
- jmp @r9
- lds r8,pr
- .align 2
+#ifdef CONFIG_TRACE_IRQFLAGS
+1: .long trace_hardirqs_off
+#endif
$current_thread_info:
.long __current_thread_info
$cpu_mode:
.long __cpu_mode
-#ifdef CONFIG_TRACE_IRQFLAGS
-3: .long trace_hardirqs_off
-#endif
! common exception handler
#include "../../entry-common.S"
ARRAY_SIZE(sh7619_devices));
}
__initcall(sh7619_devices_setup);
+
+#define INTC_IPRC 0xf8080000UL
+#define INTC_IPRD 0xf8080002UL
+
+#define CMI0_IRQ 86
+
+#define SCIF0_ERI_IRQ 88
+#define SCIF0_RXI_IRQ 89
+#define SCIF0_BRI_IRQ 90
+#define SCIF0_TXI_IRQ 91
+
+#define SCIF1_ERI_IRQ 92
+#define SCIF1_RXI_IRQ 93
+#define SCIF1_BRI_IRQ 94
+#define SCIF1_TXI_IRQ 95
+
+#define SCIF2_BRI_IRQ 96
+#define SCIF2_ERI_IRQ 97
+#define SCIF2_RXI_IRQ 98
+#define SCIF2_TXI_IRQ 99
+
+static struct ipr_data sh7619_ipr_map[] = {
+ { CMI0_IRQ, INTC_IPRC, 1, 2 },
+ { SCIF0_ERI_IRQ, INTC_IPRD, 3, 3 },
+ { SCIF0_RXI_IRQ, INTC_IPRD, 3, 3 },
+ { SCIF0_BRI_IRQ, INTC_IPRD, 3, 3 },
+ { SCIF0_TXI_IRQ, INTC_IPRD, 3, 3 },
+ { SCIF1_ERI_IRQ, INTC_IPRD, 2, 3 },
+ { SCIF1_RXI_IRQ, INTC_IPRD, 2, 3 },
+ { SCIF1_BRI_IRQ, INTC_IPRD, 2, 3 },
+ { SCIF1_TXI_IRQ, INTC_IPRD, 2, 3 },
+ { SCIF2_ERI_IRQ, INTC_IPRD, 1, 3 },
+ { SCIF2_RXI_IRQ, INTC_IPRD, 1, 3 },
+ { SCIF2_BRI_IRQ, INTC_IPRD, 1, 3 },
+ { SCIF2_TXI_IRQ, INTC_IPRD, 1, 3 },
+};
+
+void __init init_IRQ_ipr(void)
+{
+ make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map));
+}
.mapbase = 0xfffe8000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 240, 241, 242, 243},
+ .irqs = { 241, 242, 243, 240},
}, {
.mapbase = 0xfffe8800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 244, 245, 246, 247},
+ .irqs = { 247, 244, 245, 246},
}, {
.mapbase = 0xfffe9000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 248, 249, 250, 251},
+ .irqs = { 249, 250, 251, 248},
}, {
.mapbase = 0xfffe9800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 252, 253, 254, 255},
+ .irqs = { 253, 254, 255, 252},
}, {
.flags = 0,
}
ARRAY_SIZE(sh7206_devices));
}
__initcall(sh7206_devices_setup);
+
+#define INTC_IPR08 0xfffe0c04UL
+#define INTC_IPR09 0xfffe0c06UL
+#define INTC_IPR14 0xfffe0c10UL
+
+#define CMI0_IRQ 140
+
+#define MTU1_TGI1A 164
+
+#define SCIF0_BRI_IRQ 240
+#define SCIF0_ERI_IRQ 241
+#define SCIF0_RXI_IRQ 242
+#define SCIF0_TXI_IRQ 243
+
+#define SCIF1_BRI_IRQ 244
+#define SCIF1_ERI_IRQ 245
+#define SCIF1_RXI_IRQ 246
+#define SCIF1_TXI_IRQ 247
+
+#define SCIF2_BRI_IRQ 248
+#define SCIF2_ERI_IRQ 249
+#define SCIF2_RXI_IRQ 250
+#define SCIF2_TXI_IRQ 251
+
+#define SCIF3_BRI_IRQ 252
+#define SCIF3_ERI_IRQ 253
+#define SCIF3_RXI_IRQ 254
+#define SCIF3_TXI_IRQ 255
+
+static struct ipr_data sh7206_ipr_map[] = {
+ { CMI0_IRQ, INTC_IPR08, 3, 2 },
+ { MTU2_TGI1A, INTC_IPR09, 1, 2 },
+ { SCIF0_ERI_IRQ, INTC_IPR14, 3, 3 },
+ { SCIF0_RXI_IRQ, INTC_IPR14, 3, 3 },
+ { SCIF0_BRI_IRQ, INTC_IPR14, 3, 3 },
+ { SCIF0_TXI_IRQ, INTC_IPR14, 3, 3 },
+ { SCIF1_ERI_IRQ, INTC_IPR14, 2, 3 },
+ { SCIF1_RXI_IRQ, INTC_IPR14, 2, 3 },
+ { SCIF1_BRI_IRQ, INTC_IPR14, 2, 3 },
+ { SCIF1_TXI_IRQ, INTC_IPR14, 2, 3 },
+ { SCIF2_ERI_IRQ, INTC_IPR14, 1, 3 },
+ { SCIF2_RXI_IRQ, INTC_IPR14, 1, 3 },
+ { SCIF2_BRI_IRQ, INTC_IPR14, 1, 3 },
+ { SCIF2_TXI_IRQ, INTC_IPR14, 1, 3 },
+ { SCIF3_ERI_IRQ, INTC_IPR14, 0, 3 },
+ { SCIF3_RXI_IRQ, INTC_IPR14, 0, 3 },
+ { SCIF3_BRI_IRQ, INTC_IPR14, 0, 3 },
+ { SCIF3_TXI_IRQ, INTC_IPR14, 0, 3 },
+};
+
+void __init init_IRQ_ipr(void)
+{
+ make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map));
+}
obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
-obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o
# Primary on-chip clocks (common)
+ifndef CONFIG_CPU_SH4A
clock-$(CONFIG_CPU_SH4) := clock-sh4.o
-clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
+endif
# Additional clocks by subtype
clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o
break;
case 0x3000:
case 0x3003:
+ case 0x3009:
cpu_data->type = CPU_SH7343;
cpu_data->icache.ways = 4;
cpu_data->dcache.ways = 4;
cpu_data->flags |= CPU_HAS_LLSC;
break;
+ case 0x3008:
+ if (prr == 0xa0) {
+ cpu_data->type = CPU_SH7722;
+ cpu_data->icache.ways = 4;
+ cpu_data->dcache.ways = 4;
+ cpu_data->flags |= CPU_HAS_LLSC;
+ }
+ break;
case 0x8000:
cpu_data->type = CPU_ST40RA;
cpu_data->flags |= CPU_HAS_FPU;
#include <linux/io.h>
#include <asm/sci.h>
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xffc80000,
+ .end = 0xffc80000 + 0x58 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ /* Period IRQ */
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* Carry IRQ */
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ /* Alarm IRQ */
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
};
static struct platform_device *sh7750_devices[] __initdata = {
+ &rtc_device,
&sci_device,
};
vma->phys_addr = map->addr;
- if (remap_area_pages((unsigned long)vma->addr, vma->phys_addr,
- map->size, flags)) {
+ if (ioremap_page_range((unsigned long)vma->addr,
+ (unsigned long)vma->addr + map->size,
+ vma->phys_addr, __pgprot(flags))) {
vunmap(vma->addr);
return -EAGAIN;
}
map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
- ret = __sq_remap(map, flags);
+ ret = __sq_remap(map, pgprot_val(PAGE_KERNEL_NOCACHE) | flags);
if (unlikely(ret != 0))
goto out;
--- /dev/null
+#
+# Makefile for the Linux/SuperH SH-4 backends.
+#
+
+# CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
+obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
+
+# Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7343.o
+
+obj-y += $(clock-y)
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh7343.c
+ *
+ * SH7343/SH7722 support for the clock framework
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+/*
+ * SH7343/SH7722 uses a common set of multipliers and divisors, so this
+ * is quite simple..
+ */
+static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+
+#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1)
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->parent = clk_get(NULL, "cpu_clk");
+}
+
+static void master_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) & 0x000f);
+ clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx];
+}
+
+static struct clk_ops sh7343_master_clk_ops = {
+ .init = master_clk_init,
+ .recalc = master_clk_recalc,
+};
+
+static void module_clk_init(struct clk *clk)
+{
+ clk->parent = NULL;
+ clk->rate = CONFIG_SH_PCLK_FREQ;
+}
+
+static struct clk_ops sh7343_module_clk_ops = {
+ .init = module_clk_init,
+};
+
+static void bus_clk_init(struct clk *clk)
+{
+ clk->parent = clk_get(NULL, "cpu_clk");
+}
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f;
+ clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx];
+}
+
+static struct clk_ops sh7343_bus_clk_ops = {
+ .init = bus_clk_init,
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_init(struct clk *clk)
+{
+ clk->parent = clk_get(NULL, "module_clk");
+ clk->flags |= CLK_RATE_PROPAGATES;
+ clk_set_rate(clk, clk_get_rate(clk));
+}
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f;
+ clk->rate = clk->parent->rate * pll_calc() *
+ multipliers[idx] / divisors[idx];
+}
+
+static struct clk_ops sh7343_cpu_clk_ops = {
+ .init = cpu_clk_init,
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7343_clk_ops[] = {
+ &sh7343_master_clk_ops,
+ &sh7343_module_clk_ops,
+ &sh7343_bus_clk_ops,
+ &sh7343_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7343_clk_ops))
+ *ops = sh7343_clk_ops[idx];
+}
--- /dev/null
+/*
+ * SH7722 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 81, 83, 82 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7722_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7722_devices_setup(void)
+{
+ return platform_add_devices(sh7722_devices,
+ ARRAY_SIZE(sh7722_devices));
+}
+__initcall(sh7722_devices_setup);
+
+static struct ipr_data sh7722_ipr_map[] = {
+ /* IRQ, IPR-idx, shift, prio */
+ { 16, 0, 12, 2 }, /* TMU0 */
+ { 17, 0, 8, 2 }, /* TMU1 */
+ { 80, 6, 12, 3 }, /* SCIF ERI */
+ { 81, 6, 12, 3 }, /* SCIF RXI */
+ { 82, 6, 12, 3 }, /* SCIF BRI */
+ { 83, 6, 12, 3 }, /* SCIF TXI */
+};
+
+static unsigned long ipr_offsets[] = {
+ 0xa4080000, /* 0: IPRA */
+ 0xa4080004, /* 1: IPRB */
+ 0xa4080008, /* 2: IPRC */
+ 0xa408000c, /* 3: IPRD */
+ 0xa4080010, /* 4: IPRE */
+ 0xa4080014, /* 5: IPRF */
+ 0xa4080018, /* 6: IPRG */
+ 0xa408001c, /* 7: IPRH */
+ 0xa4080020, /* 8: IPRI */
+ 0xa4080024, /* 9: IPRJ */
+ 0xa4080028, /* 10: IPRK */
+ 0xa408002c, /* 11: IPRL */
+};
+
+unsigned int map_ipridx_to_addr(int idx)
+{
+ if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
+ return 0;
+ return ipr_offsets[idx];
+}
+
+void __init init_IRQ_ipr(void)
+{
+ make_ipr_irq(sh7722_ipr_map, ARRAY_SIZE(sh7722_ipr_map));
+}
;
static int __initdata keep_early;
+static int early_console_initialized;
-int __init setup_early_printk(char *opt)
+int __init setup_early_printk(char *buf)
{
- char *space;
- char buf[256];
+ if (!buf)
+ return 0;
- strlcpy(buf, opt, sizeof(buf));
- space = strchr(buf, ' ');
- if (space)
- *space = 0;
+ if (early_console_initialized)
+ return 0;
+ early_console_initialized = 1;
if (strstr(buf, "keep"))
keep_early = 1;
if (likely(early_console))
register_console(early_console);
- return 1;
+ return 0;
}
-__setup("earlyprintk=", setup_early_printk);
+early_param("earlyprintk", setup_early_printk);
void __init disable_early_printk(void)
{
+ if (!early_console_initialized || !early_console)
+ return;
if (!keep_early) {
printk("disabling early console\n");
unregister_console(early_console);
.align 2
3: .long kgdb_handle_exception
#endif /* CONFIG_SH_KGDB */
-
+#ifdef CONFIG_SH_STANDARD_BIOS
+ bra debug_kernel_fw
+ nop
+#endif
#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
-
.align 2
debug_trap:
#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+ mov r8, r0
+ shlr2 r0
+ cmp/eq #0x3f, r0 ! sh_bios() trap
+ bf 1f
+#ifdef CONFIG_SH_KGDB
+ cmp/eq #0xff, r0 ! XXX: KGDB trap, fix for SH-2.
+ bf 1f
+#endif
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
shll r0
shll r0 ! kernel space?
bt/s debug_kernel
+1:
#endif
mov.l @r15, r0 ! Restore R0 value
mov.l 1f, r8
.long 0x00360000 /* INITRD_START */
.long 0x000a0000 /* INITRD_SIZE */
.long 0
- .balign PAGE_SIZE,0,PAGE_SIZE
+1:
+ .skip PAGE_SIZE - empty_zero_page - 1b
.text
/*
*/
pc = thread_saved_pc(p);
if (in_sched_functions(pc)) {
- schedule_frame = ((unsigned long *)(long)p->thread.sp)[1];
- return (unsigned long)((unsigned long *)schedule_frame)[1];
+ schedule_frame = (unsigned long)p->thread.sp;
+ return ((unsigned long *)schedule_frame)[21];
}
+
return pc;
}
{
struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+ /* Rewind */
regs->pc -= 2;
+
+#ifdef CONFIG_BUG
+ if (__kernel_text_address(instruction_pointer(regs))) {
+ u16 insn = *(u16 *)instruction_pointer(regs);
+ if (insn == TRAPA_BUG_OPCODE)
+ handle_BUG(regs);
+ }
+#endif
+
force_sig(SIGTRAP, current);
}
static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
struct sh_machine_vector** mvp,
- unsigned long *mv_io_base,
- int *mv_mmio_enable)
+ unsigned long *mv_io_base)
{
char c = ' ', *to = command_line, *from = COMMAND_LINE;
int len = 0;
}
}
-#ifdef CONFIG_EARLY_PRINTK
- if (c == ' ' && !memcmp(from, "earlyprintk=", 12)) {
- char *ep_end;
-
- if (to != command_line)
- to--;
-
- from += 12;
- ep_end = strchr(from, ' ');
-
- setup_early_printk(from);
- printk("early console enabled\n");
-
- from = ep_end;
- }
-#endif
-
if (c == ' ' && !memcmp(from, "sh_mv=", 6)) {
char* mv_end;
char* mv_comma;
int ints[3];
get_options(mv_comma+1, ARRAY_SIZE(ints), ints);
*mv_io_base = ints[1];
- *mv_mmio_enable = ints[2];
mv_len = mv_comma - from;
} else {
mv_len = mv_end - from;
*mvp = get_mv_byname(mv_name);
}
+
c = *(from++);
if (!c)
break;
struct sh_machine_vector *mv = NULL;
char mv_name[MV_NAME_SIZE] = "";
unsigned long mv_io_base = 0;
- int mv_mmio_enable = 0;
- parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base, &mv_mmio_enable);
+ parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base);
#ifdef CONFIG_SH_UNKNOWN
if (mv == NULL) {
sh_mv_setup(cmdline_p);
+
/*
* Find the highest page frame number we have available
*/
PFN_PHYS(pages));
}
+
/*
* Reserve the kernel text and
* Reserve the bootmem bitmap. We do this in two steps (first step
ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
if (&__rd_start != &__rd_end) {
LOADER_TYPE = 1;
- INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START;
- INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start;
+ INITRD_START = PHYSADDR((unsigned long)&__rd_start) -
+ __MEMORY_START;
+ INITRD_SIZE = (unsigned long)&__rd_end -
+ (unsigned long)&__rd_start;
}
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
- reserve_bootmem_node(NODE_DATA(0), INITRD_START+__MEMORY_START, INITRD_SIZE);
- initrd_start = INITRD_START + PAGE_OFFSET + __MEMORY_START;
+ reserve_bootmem_node(NODE_DATA(0), INITRD_START +
+ __MEMORY_START, INITRD_SIZE);
+ initrd_start = INITRD_START + PAGE_OFFSET +
+ __MEMORY_START;
initrd_end = initrd_start + INITRD_SIZE;
} else {
printk("initrd extends beyond end of memory "
[CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501",
[CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780",
[CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343",
- [CPU_SH7785] = "SH7785",
+ [CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722",
[CPU_SH_NONE] = "Unknown"
};
DECLARE_EXPORT(__ashrdi3);
DECLARE_EXPORT(__ashldi3);
DECLARE_EXPORT(__lshrdi3);
-DECLARE_EXPORT(__movstr);
DECLARE_EXPORT(__movstrSI16);
+#if __GNUC__ == 4
+DECLARE_EXPORT(__movmem);
+#else
+DECLARE_EXPORT(__movstr);
+#endif
#ifdef CONFIG_CPU_SH4
+#if __GNUC__ == 4
+DECLARE_EXPORT(__movmem_i4_even);
+DECLARE_EXPORT(__movmem_i4_odd);
+DECLARE_EXPORT(__movmemSI12_i4);
+DECLARE_EXPORT(__sdivsi3_i4i);
+DECLARE_EXPORT(__udiv_qrnnd_16);
+DECLARE_EXPORT(__udivsi3_i4i);
+#else /* GCC 3.x */
DECLARE_EXPORT(__movstr_i4_even);
DECLARE_EXPORT(__movstr_i4_odd);
DECLARE_EXPORT(__movstrSI12_i4);
+#endif /* __GNUC__ == 4 */
#endif
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
*/
#define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */
-#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A)
+#if defined(CONFIG_CPU_SH2)
#define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */
#else
#define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */
#endif
}
+#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A)
+#define SYSCALL_ARG3 "trapa #0x23"
+#else
+#define SYSCALL_ARG3 "trapa #0x13"
+#endif
+
/*
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
register long __sc4 __asm__ ("r4") = (long) filename;
register long __sc5 __asm__ ("r5") = (long) argv;
register long __sc6 __asm__ ("r6") = (long) envp;
- __asm__ __volatile__ ("trapa #0x13" : "=z" (__sc0)
+ __asm__ __volatile__ (SYSCALL_ARG3 : "=z" (__sc0)
: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6)
: "memory");
return __sc0;
#include <linux/kallsyms.h>
#include <linux/io.h>
#include <linux/debug_locks.h>
+#include <linux/limits.h>
#include <asm/system.h>
#include <asm/uaccess.h>
return -EFAULT;
}
+#ifdef CONFIG_BUG
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+static inline void do_bug_verbose(struct pt_regs *regs)
+{
+ struct bug_frame f;
+ long len;
+
+ if (__copy_from_user(&f, (const void __user *)regs->pc,
+ sizeof(struct bug_frame)))
+ return;
+
+ len = __strnlen_user(f.file, PATH_MAX) - 1;
+ if (unlikely(len < 0 || len >= PATH_MAX))
+ f.file = "<bad filename>";
+ len = __strnlen_user(f.func, PATH_MAX) - 1;
+ if (unlikely(len < 0 || len >= PATH_MAX))
+ f.func = "<bad function>";
+
+ printk(KERN_ALERT "kernel BUG in %s() at %s:%d!\n",
+ f.func, f.file, f.line);
+}
+#else
+static inline void do_bug_verbose(struct pt_regs *regs)
+{
+}
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+#endif /* CONFIG_BUG */
+
+void handle_BUG(struct pt_regs *regs)
+{
+ do_bug_verbose(regs);
+ die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
+}
+
/*
* handle an instruction that does an unaligned memory access by emulating the
* desired behaviour
}
. = ALIGN(PAGE_SIZE);
- .data.page_aligned : { *(.data.idt) }
+ .data.page_aligned : { *(.data.page_aligned) }
. = ALIGN(32);
__per_cpu_start = .;
select CPU_SH4
select CPU_HAS_INTC2_IRQ
+config CPU_SHX2
+ bool
+
#
# Processor subtypes
#
config CPU_SUBTYPE_SH7785
bool "Support SH7785 processor"
select CPU_SH4A
+ select CPU_SHX2
select CPU_HAS_INTC2_IRQ
comment "SH4AL-DSP Processor Support"
bool "Support SH7343 processor"
select CPU_SH4AL_DSP
+config CPU_SUBTYPE_SH7722
+ bool "Support SH7722 processor"
+ select CPU_SH4AL_DSP
+ select CPU_SHX2
+ select CPU_HAS_IPR_IRQ
+
endmenu
menu "Memory management options"
config X2TLB
bool "Enable extended TLB mode"
- depends on CPU_SUBTYPE_SH7785 && MMU && EXPERIMENTAL
+ depends on CPU_SHX2 && MMU && EXPERIMENTAL
help
Selecting this option will enable the extended mode of the SH-X2
TLB. For legacy SH-X behaviour and interoperability, say N. For
emit_cache_params();
- if (remap_area_pages(P3SEG, 0, PAGE_SIZE * 4, _PAGE_CACHABLE))
+ if (ioremap_page_range(P3SEG, P3SEG + (PAGE_SIZE * 4), 0, PAGE_KERNEL))
panic("%s failed.", __FUNCTION__);
for (i = 0; i < cpu_data->dcache.n_aliases; i++)
printk("%d pages swap cached\n",cached);
}
+#ifdef CONFIG_MMU
static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
{
pgd_t *pgd;
set_pte_phys(address, phys, prot);
}
+#endif /* CONFIG_MMU */
/* References to section boundaries */
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/pci.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/addrspace.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
-static inline void remap_area_pte(pte_t * pte, unsigned long address,
- unsigned long size, unsigned long phys_addr, unsigned long flags)
-{
- unsigned long end;
- unsigned long pfn;
- pgprot_t pgprot = __pgprot(pgprot_val(PAGE_KERNEL_NOCACHE) | flags);
-
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- if (address >= end)
- BUG();
- pfn = phys_addr >> PAGE_SHIFT;
- do {
- if (!pte_none(*pte)) {
- printk("remap_area_pte: page already exists\n");
- BUG();
- }
- set_pte(pte, pfn_pte(pfn, pgprot));
- address += PAGE_SIZE;
- pfn++;
- pte++;
- } while (address && (address < end));
-}
-
-static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
- unsigned long size, unsigned long phys_addr, unsigned long flags)
-{
- unsigned long end;
-
- address &= ~PGDIR_MASK;
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
- phys_addr -= address;
- if (address >= end)
- BUG();
- do {
- pte_t * pte = pte_alloc_kernel(pmd, address);
- if (!pte)
- return -ENOMEM;
- remap_area_pte(pte, address, end - address, address + phys_addr, flags);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address && (address < end));
- return 0;
-}
-
-int remap_area_pages(unsigned long address, unsigned long phys_addr,
- unsigned long size, unsigned long flags)
-{
- int error;
- pgd_t * dir;
- unsigned long end = address + size;
-
- phys_addr -= address;
- dir = pgd_offset_k(address);
- flush_cache_all();
- if (address >= end)
- BUG();
- do {
- pud_t *pud;
- pmd_t *pmd;
-
- error = -ENOMEM;
-
- pud = pud_alloc(&init_mm, dir, address);
- if (!pud)
- break;
- pmd = pmd_alloc(&init_mm, pud, address);
- if (!pmd)
- break;
- if (remap_area_pmd(pmd, address, end - address,
- phys_addr + address, flags))
- break;
- error = 0;
- address = (address + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- } while (address && (address < end));
- flush_tlb_all();
- return error;
-}
-
/*
* Remap an arbitrary physical address space into the kernel virtual
* address space. Needed when the kernel wants to access high addresses
{
struct vm_struct * area;
unsigned long offset, last_addr, addr, orig_addr;
+ pgprot_t pgprot;
/* Don't allow wraparound or zero size */
last_addr = phys_addr + size - 1;
}
#endif
+ pgprot = __pgprot(pgprot_val(PAGE_KERNEL_NOCACHE) | flags);
if (likely(size))
- if (remap_area_pages(addr, phys_addr, size, flags)) {
+ if (ioremap_page_range(addr, addr + size, phys_addr, pgprot)) {
vunmap((void *)orig_addr);
return NULL;
}
*/
static inline int to_counter(struct file *file)
{
- const unsigned char *name = file->f_dentry->d_parent->d_name.name;
+ const unsigned char *name = file->f_path.dentry->d_parent->d_name.name;
return (int)simple_strtol(name, NULL, 10);
}
config GENERIC_ISA_DMA
bool
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
source init/Kconfig
menu "System type"
#include <linux/vmalloc.h>
#include <linux/sched.h>
#include <linux/string.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <linux/ioport.h>
static void shmedia_mapioaddr(unsigned long, unsigned long);
static unsigned long shmedia_ioremap(struct resource *, u32, int);
-static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
- unsigned long phys_addr, unsigned long flags)
-{
- unsigned long end;
- unsigned long pfn;
- pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_READ |
- _PAGE_WRITE | _PAGE_DIRTY |
- _PAGE_ACCESSED | _PAGE_SHARED | flags);
-
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- if (address >= end)
- BUG();
-
- pfn = phys_addr >> PAGE_SHIFT;
-
- pr_debug(" %s: pte %p address %lx size %lx phys_addr %lx\n",
- __FUNCTION__,pte,address,size,phys_addr);
-
- do {
- if (!pte_none(*pte)) {
- printk("remap_area_pte: page already exists\n");
- BUG();
- }
-
- set_pte(pte, pfn_pte(pfn, pgprot));
- address += PAGE_SIZE;
- pfn++;
- pte++;
- } while (address && (address < end));
-}
-
-static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
- unsigned long phys_addr, unsigned long flags)
-{
- unsigned long end;
-
- address &= ~PGDIR_MASK;
- end = address + size;
-
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
-
- phys_addr -= address;
-
- if (address >= end)
- BUG();
-
- do {
- pte_t * pte = pte_alloc_kernel(pmd, address);
- if (!pte)
- return -ENOMEM;
- remap_area_pte(pte, address, end - address, address + phys_addr, flags);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address && (address < end));
- return 0;
-}
-
-static int remap_area_pages(unsigned long address, unsigned long phys_addr,
- unsigned long size, unsigned long flags)
-{
- int error;
- pgd_t * dir;
- unsigned long end = address + size;
-
- phys_addr -= address;
- dir = pgd_offset_k(address);
- flush_cache_all();
- if (address >= end)
- BUG();
- do {
- pmd_t *pmd = pmd_alloc(&init_mm, dir, address);
- error = -ENOMEM;
- if (!pmd)
- break;
- if (remap_area_pmd(pmd, address, end - address,
- phys_addr + address, flags)) {
- break;
- }
- error = 0;
- address = (address + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- } while (address && (address < end));
- flush_tlb_all();
- return 0;
-}
-
/*
* Generic mapping function (not visible outside):
*/
void * addr;
struct vm_struct * area;
unsigned long offset, last_addr;
+ pgprot_t pgprot;
/* Don't allow wraparound or zero size */
last_addr = phys_addr + size - 1;
if (!size || last_addr < phys_addr)
return NULL;
+ pgprot = __pgprot(_PAGE_PRESENT | _PAGE_READ |
+ _PAGE_WRITE | _PAGE_DIRTY |
+ _PAGE_ACCESSED | _PAGE_SHARED | flags);
+
/*
* Mappings have to be page-aligned
*/
return NULL;
area->phys_addr = phys_addr;
addr = area->addr;
- if (remap_area_pages((unsigned long)addr, phys_addr, size, flags)) {
+ if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
+ phys_addr, pgprot)) {
vunmap(addr);
return NULL;
}
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config SUN_PM
bool
default y
if ((va = __get_free_pages(GFP_KERNEL|__GFP_COMP, order)) == 0)
goto err_nopages;
- if ((res = kmalloc(sizeof(struct resource), GFP_KERNEL)) == NULL)
+ if ((res = kzalloc(sizeof(struct resource), GFP_KERNEL)) == NULL)
goto err_nomem;
- memset((char*)res, 0, sizeof(struct resource));
if (allocate_resource(&_sparc_dvma, res, len_total,
_sparc_dvma.start, _sparc_dvma.end, PAGE_SIZE, NULL, NULL) != 0) {
return NULL;
}
- if ((res = kmalloc(sizeof(struct resource), GFP_KERNEL)) == NULL) {
+ if ((res = kzalloc(sizeof(struct resource), GFP_KERNEL)) == NULL) {
free_pages(va, order);
printk("pci_alloc_consistent: no core\n");
return NULL;
}
- memset((char*)res, 0, sizeof(struct resource));
if (allocate_resource(&_sparc_dvma, res, len_total,
_sparc_dvma.start, _sparc_dvma.end, PAGE_SIZE, NULL, NULL) != 0) {
}
if (action == NULL)
- action = (struct irqaction *)kmalloc(sizeof(struct irqaction),
+ action = kmalloc(sizeof(struct irqaction),
GFP_ATOMIC);
if (!action) {
}
if (action == NULL)
- action = (struct irqaction *)kmalloc(sizeof(struct irqaction),
+ action = kmalloc(sizeof(struct irqaction),
GFP_ATOMIC);
if (!action) {
{
struct of_device *dev;
- dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
- memset(dev, 0, sizeof(*dev));
dev->dev.parent = parent;
dev->dev.bus = bus;
if (request == PTRACE_TRACEME) {
ret = ptrace_traceme();
- pt_succ_return(regs, 0);
+ if (ret < 0)
+ pt_error_return(regs, -ret);
+ else
+ pt_succ_return(regs, 0);
goto out;
}
}
if (action == NULL)
- action = (struct irqaction *)kmalloc(sizeof(struct irqaction),
+ action = kmalloc(sizeof(struct irqaction),
GFP_ATOMIC);
if (!action) {
nsbi = 0;
for_each_sbus(sbus)
nsbi++;
- sbus_actions = (struct sbus_action *)kmalloc (nsbi * 8 * 4 * sizeof(struct sbus_action), GFP_ATOMIC);
- memset (sbus_actions, 0, (nsbi * 8 * 4 * sizeof(struct sbus_action)));
+ sbus_actions = kzalloc (nsbi * 8 * 4 * sizeof(struct sbus_action), GFP_ATOMIC);
+ if (!sbus_actions) {
+ prom_printf("SUN4D: Cannot allocate sbus_actions, halting.\n");
+ prom_halt();
+ }
for_each_sbus(sbus) {
#ifdef CONFIG_SMP
extern unsigned char boot_cpu_id;
* SunOS is so stupid some times... hmph!
*/
if (file) {
- if (imajor(file->f_dentry->d_inode) == MEM_MAJOR &&
- iminor(file->f_dentry->d_inode) == 5) {
+ if (imajor(file->f_path.dentry->d_inode) == MEM_MAJOR &&
+ iminor(file->f_path.dentry->d_inode) == 5) {
flags |= MAP_ANONYMOUS;
fput(file);
file = NULL;
if (!file)
goto out;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
socket = SOCKET_I(inode);
local.sin_family = AF_INET;
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/dma.h>
+#include <asm/oplib.h>
/* #define IOUNIT_DEBUG */
#ifdef IOUNIT_DEBUG
struct linux_prom_registers iommu_promregs[PROMREG_MAX];
struct resource r;
- iounit = kmalloc(sizeof(struct iounit_struct), GFP_ATOMIC);
+ iounit = kzalloc(sizeof(struct iounit_struct), GFP_ATOMIC);
+ if (!iounit) {
+ prom_printf("SUN4D: Cannot alloc iounit, halting.\n");
+ prom_halt();
+ }
- memset(iounit, 0, sizeof(*iounit));
iounit->limit[0] = IOUNIT_BMAP1_START;
iounit->limit[1] = IOUNIT_BMAP2_START;
iounit->limit[2] = IOUNIT_BMAPM_START;
bool
default y
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
config TIME_INTERPOLATION
bool
default y
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
config AUDIT_ARCH
bool
default y
menu "Kernel hacking"
+config TRACE_IRQFLAGS_SUPPORT
+ bool
+ default y
+
source "lib/Kconfig.debug"
config DEBUG_STACK_USAGE
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc2
-# Tue Oct 17 19:29:20 2006
+# Linux kernel version: 2.6.19
+# Sat Dec 9 15:41:30 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_AUDIT_ARCH=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
CONFIG_SECCOMP=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
+CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
#
# DCCP Kernel Hacking
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_SOUND_PRIME is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HID_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
# CONFIG_NLS_UTF8 is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Instrumentation Support
#
CONFIG_PROFILING=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
power.o sbus.o iommu_common.o sparc64_ksyms.o chmc.o \
visemul.o prom.o of_device.o
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_PCI) += ebus.o isa.o pci_common.o pci_iommu.o \
pci_psycho.o pci_sabre.o pci_schizo.o \
pci_sun4v.o pci_sun4v_asm.o
if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != OMAGIC &&
N_MAGIC(ex) != QMAGIC && N_MAGIC(ex) != NMAGIC) ||
N_TRSIZE(ex) || N_DRSIZE(ex) ||
- bprm->file->f_dentry->d_inode->i_size < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
+ bprm->file->f_path.dentry->d_inode->i_size < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
return -ENOEXEC;
}
int retval;
struct exec ex;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
retval = -ENOEXEC;
error = kernel_read(file, 0, (char *) &ex, sizeof(ex));
static int init_one_mctrl(struct device_node *dp)
{
- struct mctrl_info *mp = kmalloc(sizeof(*mp), GFP_KERNEL);
+ struct mctrl_info *mp = kzalloc(sizeof(*mp), GFP_KERNEL);
int portid = of_getintprop_default(dp, "portid", -1);
struct linux_prom64_registers *regs;
void *pval;
if (!mp)
return -1;
- memset(mp, 0, sizeof(*mp));
if (portid == -1)
goto fail;
1: ba,pt %xcc, etrap_irq
rd %pc, %g7
-2: mov %l4, %o1
+2:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
+ mov %l4, %o1
mov %l5, %o2
call spitfire_access_error
add %sp, PTREGS_OFF, %o0
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
mov 0x0, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
mov 0x1, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
mov %l4, %o1
mov %l5, %o2
call cheetah_fecc_handler
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
mov %l4, %o1
mov %l5, %o2
call cheetah_cee_handler
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
mov %l4, %o1
mov %l5, %o2
call cheetah_deferred_handler
call __bzero
sub %o1, %o0, %o1
+#ifdef CONFIG_LOCKDEP
+ /* We have this call this super early, as even prom_init can grab
+ * spinlocks and thus call into the lockdep code.
+ */
+ call lockdep_init
+ nop
+#endif
+
mov %l6, %o1 ! OpenPROM stack
call prom_init
mov %l7, %o0 ! OpenPROM cif handler
struct linux_prom_registers *regs;
struct sparc_isa_device *isa_dev;
- isa_dev = kmalloc(sizeof(*isa_dev), GFP_KERNEL);
+ isa_dev = kzalloc(sizeof(*isa_dev), GFP_KERNEL);
if (!isa_dev) {
fatal_err("cannot allocate child isa_dev");
prom_halt();
}
- memset(isa_dev, 0, sizeof(*isa_dev));
-
/* Link it in to parent. */
isa_dev->next = parent_isa_dev->child;
parent_isa_dev->child = isa_dev;
struct linux_prom_registers *regs;
struct sparc_isa_device *isa_dev;
- isa_dev = kmalloc(sizeof(*isa_dev), GFP_KERNEL);
+ isa_dev = kzalloc(sizeof(*isa_dev), GFP_KERNEL);
if (!isa_dev) {
printk(KERN_DEBUG "ISA: cannot allocate isa_dev");
return;
}
- memset(isa_dev, 0, sizeof(*isa_dev));
-
isa_dev->ofdev.node = dp;
isa_dev->ofdev.dev.parent = &isa_br->ofdev.dev;
isa_dev->ofdev.dev.bus = &isa_bus_type;
pbm = pdev_cookie->pbm;
dp = pdev_cookie->prom_node;
- isa_br = kmalloc(sizeof(*isa_br), GFP_KERNEL);
+ isa_br = kzalloc(sizeof(*isa_br), GFP_KERNEL);
if (!isa_br) {
printk(KERN_DEBUG "isa: cannot allocate sparc_isa_bridge");
return;
}
- memset(isa_br, 0, sizeof(*isa_br));
-
isa_br->ofdev.node = dp;
isa_br->ofdev.dev.parent = &pdev->dev;
isa_br->ofdev.dev.bus = &isa_bus_type;
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
p->ainsn.insn[0] = *p->addr;
+ flushi(&p->ainsn.insn[0]);
+
p->ainsn.insn[1] = BREAKPOINT_INSTRUCTION_2;
+ flushi(&p->ainsn.insn[1]);
+
p->opcode = *p->addr;
return 0;
}
/* If INSN is a relative control transfer instruction,
* return the corrected branch destination value.
*
- * The original INSN location was REAL_PC, it actually
- * executed at PC and produced destination address NPC.
+ * regs->tpc and regs->tnpc still hold the values of the
+ * program counters at the time of trap due to the execution
+ * of the BREAKPOINT_INSTRUCTION_2 at p->ainsn.insn[1]
+ *
*/
-static unsigned long __kprobes relbranch_fixup(u32 insn, unsigned long real_pc,
- unsigned long pc,
- unsigned long npc)
+static unsigned long __kprobes relbranch_fixup(u32 insn, struct kprobe *p,
+ struct pt_regs *regs)
{
+ unsigned long real_pc = (unsigned long) p->addr;
+
/* Branch not taken, no mods necessary. */
- if (npc == pc + 0x4UL)
- return real_pc + 0x4UL;
+ if (regs->tnpc == regs->tpc + 0x4UL)
+ return real_pc + 0x8UL;
/* The three cases are call, branch w/prediction,
* and traditional branch.
if ((insn & 0xc0000000) == 0x40000000 ||
(insn & 0xc1c00000) == 0x00400000 ||
(insn & 0xc1c00000) == 0x00800000) {
+ unsigned long ainsn_addr;
+
+ ainsn_addr = (unsigned long) &p->ainsn.insn[0];
+
/* The instruction did all the work for us
* already, just apply the offset to the correct
* instruction location.
*/
- return (real_pc + (npc - pc));
+ return (real_pc + (regs->tnpc - ainsn_addr));
}
- return real_pc + 0x4UL;
+ /* It is jmpl or some other absolute PC modification instruction,
+ * leave NPC as-is.
+ */
+ return regs->tnpc;
}
/* If INSN is an instruction which writes it's PC location
{
unsigned long *slot = NULL;
- /* Simplest cast is call, which always uses %o7 */
+ /* Simplest case is 'call', which always uses %o7 */
if ((insn & 0xc0000000) == 0x40000000) {
slot = ®s->u_regs[UREG_I7];
}
- /* Jmpl encodes the register inside of the opcode */
+ /* 'jmpl' encodes the register inside of the opcode */
if ((insn & 0xc1f80000) == 0x81c00000) {
unsigned long rd = ((insn >> 25) & 0x1f);
/*
* Called after single-stepping. p->addr is the address of the
- * instruction whose first byte has been replaced by the breakpoint
+ * instruction which has been replaced by the breakpoint
* instruction. To avoid the SMP problems that can occur when we
* temporarily put back the original opcode to single-step, we
* single-stepped a copy of the instruction. The address of this
- * copy is p->ainsn.insn.
+ * copy is &p->ainsn.insn[0].
*
* This function prepares to return from the post-single-step
* breakpoint trap.
{
u32 insn = p->ainsn.insn[0];
+ regs->tnpc = relbranch_fixup(insn, p, regs);
+
+ /* This assignment must occur after relbranch_fixup() */
regs->tpc = kcb->kprobe_orig_tnpc;
- regs->tnpc = relbranch_fixup(insn,
- (unsigned long) p->addr,
- (unsigned long) &p->ainsn.insn[0],
- regs->tnpc);
+
retpc_fixup(regs, insn, (unsigned long) p->addr);
regs->tstate = ((regs->tstate & ~TSTATE_PIL) |
struct jprobe *jp = container_of(p, struct jprobe, kp);
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- kcb->jprobe_saved_regs_location = regs;
memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs));
- /* Save a whole stack frame, this gets arguments
- * pushed onto the stack after using up all the
- * arg registers.
- */
- memcpy(&(kcb->jprobe_saved_stack),
- (char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
- sizeof(kcb->jprobe_saved_stack));
-
regs->tpc = (unsigned long) jp->entry;
regs->tnpc = ((unsigned long) jp->entry) + 0x4UL;
regs->tstate |= TSTATE_PIL;
void __kprobes jprobe_return(void)
{
- __asm__ __volatile__(
- ".globl jprobe_return_trap_instruction\n"
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ register unsigned long orig_fp asm("g1");
+
+ orig_fp = kcb->jprobe_saved_regs.u_regs[UREG_FP];
+ __asm__ __volatile__("\n"
+"1: cmp %%sp, %0\n\t"
+ "blu,a,pt %%xcc, 1b\n\t"
+ " restore\n\t"
+ ".globl jprobe_return_trap_instruction\n"
"jprobe_return_trap_instruction:\n\t"
- "ta 0x70");
+ "ta 0x70"
+ : /* no outputs */
+ : "r" (orig_fp));
}
extern void jprobe_return_trap_instruction(void);
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
if (addr == (u32 *) jprobe_return_trap_instruction) {
- if (kcb->jprobe_saved_regs_location != regs) {
- printk("JPROBE: Current regs (%p) does not match "
- "saved regs (%p).\n",
- regs, kcb->jprobe_saved_regs_location);
- printk("JPROBE: Saved registers\n");
- __show_regs(kcb->jprobe_saved_regs_location);
- printk("JPROBE: Current registers\n");
- __show_regs(regs);
- BUG();
- }
- /* Restore old register state. Do pt_regs
- * first so that UREG_FP is the original one for
- * the stack frame restore.
- */
memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs));
-
- memcpy((char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
- &(kcb->jprobe_saved_stack),
- sizeof(kcb->jprobe_saved_stack));
-
preempt_enable_no_resched();
return 1;
}
{
struct of_device *dev;
- dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
- memset(dev, 0, sizeof(*dev));
dev->dev.parent = parent;
dev->dev.bus = bus;
static void pbm_scan_bus(struct pci_controller_info *p,
struct pci_pbm_info *pbm)
{
- struct pcidev_cookie *cookie = kmalloc(sizeof(*cookie), GFP_KERNEL);
+ struct pcidev_cookie *cookie = kzalloc(sizeof(*cookie), GFP_KERNEL);
if (!cookie) {
prom_printf("%s: Critical allocation failure.\n", pbm->name);
}
/* All we care about is the PBM. */
- memset(cookie, 0, sizeof(*cookie));
cookie->pbm = pbm;
pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, p->pci_ops, pbm);
/* Allocate and initialize the free area map. */
sz = num_tsb_entries / 8;
sz = (sz + 7UL) & ~7UL;
- iommu->arena.map = kmalloc(sz, GFP_KERNEL);
+ iommu->arena.map = kzalloc(sz, GFP_KERNEL);
if (!iommu->arena.map) {
prom_printf("PCI_IOMMU: Error, kmalloc(arena.map) failed.\n");
prom_halt();
}
- memset(iommu->arena.map, 0, sz);
iommu->arena.limit = num_tsb_entries;
sz = probe_existing_entries(pbm, iommu);
per_cpu(pci_iommu_batch, i).pglist = (u64 *) page;
}
- p = kmalloc(sizeof(struct pci_controller_info), GFP_ATOMIC);
+ p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC);
if (!p)
goto fatal_memory_error;
- memset(p, 0, sizeof(*p));
-
- iommu = kmalloc(sizeof(struct pci_iommu), GFP_ATOMIC);
+ iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC);
if (!iommu)
goto fatal_memory_error;
- memset(iommu, 0, sizeof(*iommu));
p->pbm_A.iommu = iommu;
- iommu = kmalloc(sizeof(struct pci_iommu), GFP_ATOMIC);
+ iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC);
if (!iommu)
goto fatal_memory_error;
- memset(iommu, 0, sizeof(*iommu));
p->pbm_B.iommu = iommu;
p->next = pci_controller_root;
#endif
if (request == PTRACE_TRACEME) {
ret = ptrace_traceme();
- pt_succ_return(regs, 0);
+ if (ret < 0)
+ pt_error_return(regs, -ret);
+ else
+ pt_succ_return(regs, 0);
goto out;
}
__handle_softirq_continue:
rtrap_xcall:
sethi %hi(0xf << 20), %l4
- andcc %l1, TSTATE_PRIV, %l3
and %l1, %l4, %l4
+ andn %l1, %l4, %l1
+ srl %l4, 20, %l4
+#ifdef CONFIG_TRACE_IRQFLAGS
+ brnz,pn %l4, rtrap_no_irq_enable
+ nop
+ call trace_hardirqs_on
+ nop
+ wrpr %l4, %pil
+rtrap_no_irq_enable:
+#endif
+ andcc %l1, TSTATE_PRIV, %l3
bne,pn %icc, to_kernel
- andn %l1, %l4, %l1
+ nop
/* We must hold IRQs off and atomically test schedule+signal
* state, then hold them off all the way back to userspace.
- * If we are returning to kernel, none of this matters.
+ * If we are returning to kernel, none of this matters. Note
+ * that we are disabling interrupts via PSTATE_IE, not using
+ * %pil.
*
* If we do not do this, there is a window where we would do
* the tests, later the signal/resched event arrives but we do
ld [%sp + PTREGS_OFF + PT_V9_Y], %o3
wr %o3, %g0, %y
- srl %l4, 20, %l4
wrpr %l4, 0x0, %pil
wrpr %g0, 0x1, %tl
wrpr %l1, %g0, %tstate
ldx [%g6 + TI_FLAGS], %l5
andcc %l5, _TIF_NEED_RESCHED, %g0
be,pt %xcc, kern_fpucheck
- srl %l4, 20, %l5
- cmp %l5, 0
+ nop
+ cmp %l4, 0
bne,pn %xcc, kern_fpucheck
sethi %hi(PREEMPT_ACTIVE), %l6
stw %l6, [%g6 + TI_PRE_COUNT]
--- /dev/null
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/thread_info.h>
+#include <asm/ptrace.h>
+
+void save_stack_trace(struct stack_trace *trace, struct task_struct *task)
+{
+ unsigned long ksp, fp, thread_base;
+ struct thread_info *tp;
+
+ if (!task)
+ task = current;
+ tp = task_thread_info(task);
+ if (task == current) {
+ flushw_all();
+ __asm__ __volatile__(
+ "mov %%fp, %0"
+ : "=r" (ksp)
+ );
+ } else
+ ksp = tp->ksp;
+
+ fp = ksp + STACK_BIAS;
+ thread_base = (unsigned long) tp;
+ do {
+ struct reg_window *rw;
+
+ /* Bogus frame pointer? */
+ if (fp < (thread_base + sizeof(struct thread_info)) ||
+ fp >= (thread_base + THREAD_SIZE))
+ break;
+
+ rw = (struct reg_window *) fp;
+ if (trace->skip > 0)
+ trace->skip--;
+ else
+ trace->entries[trace->nr_entries++] = rw->ins[7];
+
+ fp = rw->ins[6] + STACK_BIAS;
+ } while (trace->nr_entries < trace->max_entries);
+}
mov %g1, %g4
ba,pt %xcc, etrap_irq
rd %pc, %g7
-
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
/* Log the event. */
add %sp, PTREGS_OFF, %o0
call sun4v_resum_error
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
-
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
call sun4v_resum_overflow
add %sp, PTREGS_OFF, %o0
mov %g1, %g4
ba,pt %xcc, etrap_irq
rd %pc, %g7
-
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
/* Log the event. */
add %sp, PTREGS_OFF, %o0
call sun4v_nonresum_error
wrpr %g0, 15, %pil
ba,pt %xcc, etrap_irq
rd %pc, %g7
-
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
call sun4v_nonresum_overflow
add %sp, PTREGS_OFF, %o0
file = fget(fd);
if (!file)
goto out;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if (imajor(inode) == MEM_MAJOR && iminor(inode) == 5) {
flags |= MAP_ANONYMOUS;
fput(file);
if (!file)
return 0;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
socket = SOCKET_I(inode);
local.sin_family = AF_INET;
break;
case 2:
rval = -EFAULT;
- kmbuf = (struct msgbuf *)kmalloc(sizeof(struct msgbuf) + arg3,
+ kmbuf = kmalloc(sizeof(struct msgbuf) + arg3,
GFP_KERNEL);
if (!kmbuf)
break;
break;
case 3:
rval = -EFAULT;
- kmbuf = (struct msgbuf *)kmalloc(sizeof(struct msgbuf) + arg3,
+ kmbuf = kmalloc(sizeof(struct msgbuf) + arg3,
GFP_KERNEL);
if (!kmbuf || sunos_msgbuf_get((struct msgbuf32 __user *)(unsigned long)arg2,
kmbuf, arg3))
*/
#include <linux/module.h>
-#include <linux/sched.h> /* for jiffies */
+#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/kallsyms.h>
#include <linux/signal.h>
put_cpu();
+ if (ent->err_type == SUN4V_ERR_TYPE_WARNING_RES) {
+ /* If err_type is 0x4, it's a powerdown request. Do
+ * not do the usual resumable error log because that
+ * makes it look like some abnormal error.
+ */
+ printk(KERN_INFO "Power down request...\n");
+ kill_cad_pid(SIGINT, 1);
+ return;
+ }
+
sun4v_log_error(regs, &local_copy, cpu,
KERN_ERR "RESUMABLE ERROR",
&sun4v_resum_oflow_cnt);
do_exit(SIGSEGV);
}
+#define VIS_OPCODE_MASK ((0x3 << 30) | (0x3f << 19))
+#define VIS_OPCODE_VAL ((0x2 << 30) | (0x36 << 19))
+
extern int handle_popc(u32 insn, struct pt_regs *regs);
extern int handle_ldf_stq(u32 insn, struct pt_regs *regs);
+extern int vis_emul(struct pt_regs *, unsigned int);
void do_illegal_instruction(struct pt_regs *regs)
{
if (handle_ldf_stq(insn, regs))
return;
} else if (tlb_type == hypervisor) {
- extern int vis_emul(struct pt_regs *, unsigned int);
+ if ((insn & VIS_OPCODE_MASK) == VIS_OPCODE_VAL) {
+ if (!vis_emul(regs, insn))
+ return;
+ } else {
+ struct fpustate *f = FPUSTATE;
- if (!vis_emul(regs, insn))
- return;
+ /* XXX maybe verify XFSR bits like
+ * XXX do_fpother() does?
+ */
+ if (do_mathemu(regs, f))
+ return;
+ }
}
}
info.si_signo = SIGILL;
return !floating_point_load_or_store_p(insn);
}
-static void kernel_mna_trap_fault(void)
+static void kernel_mna_trap_fault(int fixup_tstate_asi)
{
struct pt_regs *regs = current_thread_info()->kern_una_regs;
unsigned int insn = current_thread_info()->kern_una_insn;
regs->tpc = entry->fixup;
regs->tnpc = regs->tpc + 4;
- regs->tstate &= ~TSTATE_ASI;
- regs->tstate |= (ASI_AIUS << 24UL);
+ if (fixup_tstate_asi) {
+ regs->tstate &= ~TSTATE_ASI;
+ regs->tstate |= (ASI_AIUS << 24UL);
+ }
}
-asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn)
+static void log_unaligned(struct pt_regs *regs)
{
static unsigned long count, last_time;
- enum direction dir = decode_direction(insn);
- int size = decode_access_size(insn);
-
- current_thread_info()->kern_una_regs = regs;
- current_thread_info()->kern_una_insn = insn;
if (jiffies - last_time > 5 * HZ)
count = 0;
printk("Kernel unaligned access at TPC[%lx] ", regs->tpc);
print_symbol("%s\n", regs->tpc);
}
+}
+
+asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn)
+{
+ enum direction dir = decode_direction(insn);
+ int size = decode_access_size(insn);
+ int orig_asi, asi;
+
+ current_thread_info()->kern_una_regs = regs;
+ current_thread_info()->kern_una_insn = insn;
+
+ orig_asi = asi = decode_asi(insn, regs);
+
+ /* If this is a {get,put}_user() on an unaligned userspace pointer,
+ * just signal a fault and do not log the event.
+ */
+ if (asi == ASI_AIUS) {
+ kernel_mna_trap_fault(0);
+ return;
+ }
+
+ log_unaligned(regs);
if (!ok_for_kernel(insn) || dir == both) {
printk("Unsupported unaligned load/store trap for kernel "
unaligned_panic("Kernel does fpu/atomic "
"unaligned load/store.", regs);
- kernel_mna_trap_fault();
+ kernel_mna_trap_fault(0);
} else {
unsigned long addr, *reg_addr;
- int orig_asi, asi, err;
+ int err;
addr = compute_effective_address(regs, insn,
((insn >> 25) & 0x1f));
regs->tpc, dirstrings[dir], addr, size,
regs->u_regs[UREG_RETPC]);
#endif
- orig_asi = asi = decode_asi(insn, regs);
switch (asi) {
case ASI_NL:
case ASI_AIUPL:
/* Not reached... */
}
if (unlikely(err))
- kernel_mna_trap_fault();
+ kernel_mna_trap_fault(1);
else
advance(regs);
}
/* 001001100 - Permute bytes as specified by GSR.MASK */
#define BSHUFFLE_OPF 0x04c
-#define VIS_OPCODE_MASK ((0x3 << 30) | (0x3f << 19))
-#define VIS_OPCODE_VAL ((0x2 << 30) | (0x36 << 19))
-
#define VIS_OPF_SHIFT 5
#define VIS_OPF_MASK (0x1ff << VIS_OPF_SHIFT)
if (get_user(insn, (u32 __user *) pc))
return -EFAULT;
- if ((insn & VIS_OPCODE_MASK) != VIS_OPCODE_VAL)
- return -EINVAL;
-
opf = (insn & VIS_OPF_MASK) >> VIS_OPF_SHIFT;
switch (opf) {
default:
sethi %hi(109f), %g7
b,pt %xcc, etrap_irq
109: or %g7, %lo(109b), %g7
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
call smp_synchronize_tick_client
nop
clr %l6
sethi %hi(109f), %g7
b,pt %xcc, etrap_irq
109: or %g7, %lo(109b), %g7
+#ifdef CONFIG_TRACE_IRQFLAGS
+ call trace_hardirqs_off
+ nop
+#endif
call __show_regs
add %sp, PTREGS_OFF, %o0
clr %l6
error = -EBADF;
file = fget(fd);
if (file) {
- error = report_statvfs(file->f_vfsmnt, file->f_dentry->d_inode, buf);
+ error = report_statvfs(file->f_path.mnt, file->f_path.dentry->d_inode, buf);
fput(file);
}
file = fget(fd);
if (file) {
lock_kernel();
- error = report_statvfs64(file->f_vfsmnt, file->f_dentry->d_inode, buf);
+ error = report_statvfs64(file->f_path.mnt, file->f_path.dentry->d_inode, buf);
unlock_kernel();
fput(file);
}
rcu_read_lock();
fdt = files_fdtable(current->files);
if (! fdt->fd[fd] ||
- ! fdt->fd[fd]->f_dentry ||
- ! (ino = fdt->fd[fd]->f_dentry->d_inode) ||
+ ! fdt->fd[fd]->f_path.dentry ||
+ ! (ino = fdt->fd[fd]->f_path.dentry->d_inode) ||
! S_ISSOCK(ino->i_mode)) {
rcu_read_unlock();
return TBADF;
struct sol_socket_struct *sock;
struct module_info *mi;
- ino = filp->f_dentry->d_inode;
+ ino = filp->f_path.dentry->d_inode;
if (!S_ISSOCK(ino->i_mode))
return -EBADF;
sock = filp->private_data;
if (!file)
goto out;
else {
- struct inode * inode = file->f_dentry->d_inode;
+ struct inode * inode = file->f_path.dentry->d_inode;
if(imajor(inode) == MEM_MAJOR &&
iminor(inode) == 5) {
flags |= MAP_ANONYMOUS;
Solaris setpgrp and setsid? */
ret = sys_setpgid(0, 0);
if (ret) return ret;
- mutex_lock(&tty_mutex);
- current->signal->tty = NULL;
- mutex_unlock(&tty_mutex);
+ proc_clear_tty(current);
return process_group(current);
}
case 2: /* getsid */
* No shit. WTF is it supposed to do, anyway?
*
* Try instead:
- * d_delete(filp->f_dentry), then d_instantiate with sock inode
+ * d_delete(filp->f_path.dentry), then d_instantiate with sock inode
*/
- dentry = filp->f_dentry;
- filp->f_dentry = dget(fcheck(fd)->f_dentry);
- filp->f_dentry->d_inode->i_rdev = inode->i_rdev;
- filp->f_dentry->d_inode->i_flock = inode->i_flock;
- SOCKET_I(filp->f_dentry->d_inode)->file = filp;
+ dentry = filp->f_path.dentry;
+ filp->f_path.dentry = dget(fcheck(fd)->f_path.dentry);
+ filp->f_path.dentry->d_inode->i_rdev = inode->i_rdev;
+ filp->f_path.dentry->d_inode->i_flock = inode->i_flock;
+ SOCKET_I(filp->f_path.dentry->d_inode)->file = filp;
filp->f_op = &socksys_file_ops;
sock = (struct sol_socket_struct*)
mykmalloc(sizeof(struct sol_socket_struct), GFP_KERNEL);
struct inode *ino;
unsigned int mask = 0;
- ino=filp->f_dentry->d_inode;
+ ino=filp->f_path.dentry->d_inode;
if (ino && S_ISSOCK(ino->i_mode)) {
struct sol_socket_struct *sock;
sock = (struct sol_socket_struct*)filp->private_data;
SOLD("wakeing socket");
fdt = files_fdtable(current->files);
- sock = SOCKET_I(fdt->fd[fd]->f_dentry->d_inode);
+ sock = SOCKET_I(fdt->fd[fd]->f_path.dentry->d_inode);
wake_up_interruptible(&sock->wait);
read_lock(&sock->sk->sk_callback_lock);
if (sock->fasync_list && !test_bit(SOCK_ASYNC_WAITDATA, &sock->flags))
fdt = files_fdtable(current->files);
filp = fdt->fd[fd];
- ino = filp->f_dentry->d_inode;
+ ino = filp->f_path.dentry->d_inode;
sock = (struct sol_socket_struct *)filp->private_data;
SOLD("entry");
if (get_user(ret, (int __user *)A(ctl_buf)))
SOLDD(("%u %p %d %p %p %d %p %d\n", fd, ctl_buf, ctl_maxlen, ctl_len, data_buf, data_maxlen, data_len, *flags_p));
fdt = files_fdtable(current->files);
filp = fdt->fd[fd];
- ino = filp->f_dentry->d_inode;
+ ino = filp->f_path.dentry->d_inode;
sock = (struct sol_socket_struct *)filp->private_data;
SOLDD(("%p %p\n", sock->pfirst, sock->pfirst ? sock->pfirst->next : NULL));
if ( ctl_maxlen > 0 && !sock->pfirst && SOCKET_I(ino)->type == SOCK_STREAM
filp = fdt->fd[fd];
if(!filp) goto out;
- ino = filp->f_dentry->d_inode;
+ ino = filp->f_path.dentry->d_inode;
if (!ino || !S_ISSOCK(ino->i_mode))
goto out;
filp = fdt->fd[fd];
if(!filp) goto out;
- ino = filp->f_dentry->d_inode;
+ ino = filp->f_path.dentry->d_inode;
if (!ino) goto out;
if (!S_ISSOCK(ino->i_mode) &&
bool
default y
+config GENERIC_BUG
+ bool
+ default y
+ depends on BUG
+
# Used in kernel/irq/manage.c and include/linux/irq.h
config IRQ_RELEASE_METHOD
bool
return ret;
}
-void line_set_termios(struct tty_struct *tty, struct termios * old)
+void line_set_termios(struct tty_struct *tty, struct ktermios * old)
{
/* nothing */
}
return pkt_len;
}
-static void uml_dev_close(void* dev)
+static void uml_dev_close(struct work_struct *work)
{
- dev_close( (struct net_device *) dev);
+ struct uml_net_private *lp =
+ container_of(work, struct uml_net_private, work);
+ dev_close(lp->dev);
}
irqreturn_t uml_net_interrupt(int irq, void *dev_id)
spin_lock(&lp->lock);
while((err = uml_net_rx(dev)) > 0) ;
if(err < 0) {
- DECLARE_WORK(close_work, uml_dev_close, dev);
printk(KERN_ERR
"Device '%s' read returned %d, shutting it down\n",
dev->name, err);
* again lp->lock.
* And dev_close() can be safely called multiple times on the
* same device, since it tests for (dev->flags & IFF_UP). So
- * there's no harm in delaying the device shutdown. */
- schedule_work(&close_work);
-#error this is not permitted - close_work will go out of scope
+ * there's no harm in delaying the device shutdown.
+ * Furthermore, the workqueue will not re-enqueue an already
+ * enqueued work item. */
+ schedule_work(&lp->work);
goto out;
}
reactivate_fd(lp->fd, UM_ETH_IRQ);
size = transport->private_size + sizeof(struct uml_net_private) +
sizeof(((struct uml_net_private *) 0)->user);
- device = kmalloc(sizeof(*device), GFP_KERNEL);
+ device = kzalloc(sizeof(*device), GFP_KERNEL);
if (device == NULL) {
printk(KERN_ERR "eth_configure failed to allocate uml_net\n");
return(1);
}
- memset(device, 0, sizeof(*device));
INIT_LIST_HEAD(&device->list);
device->index = n;
/* This points to the transport private data. It's still clear, but we
* must memset it to 0 *now*. Let's help the drivers. */
memset(lp, 0, size);
+ INIT_WORK(&lp->work, uml_dev_close);
/* sysfs register */
if (!driver_registered) {
extern int line_write(struct tty_struct *tty, const unsigned char *buf,
int len);
extern void line_put_char(struct tty_struct *tty, unsigned char ch);
-extern void line_set_termios(struct tty_struct *tty, struct termios * old);
+extern void line_set_termios(struct tty_struct *tty, struct ktermios * old);
extern int line_chars_in_buffer(struct tty_struct *tty);
extern void line_flush_buffer(struct tty_struct *tty);
extern void line_flush_chars(struct tty_struct *tty);
#include <linux/skbuff.h>
#include <linux/socket.h>
#include <linux/list.h>
+#include <linux/workqueue.h>
struct uml_net {
struct list_head list;
struct net_device *dev;
struct timer_list tl;
struct net_device_stats stats;
+ struct work_struct work;
int fd;
unsigned char mac[ETH_ALEN];
unsigned short (*protocol)(struct sk_buff *);
char __user *__user *env)
{
long error;
+ struct tty_struct *tty;
#ifdef CONFIG_TTY_LOG
mutex_lock(&tty_mutex);
- task_lock(current); /* FIXME: is this needed ? */
- log_exec(argv, current->signal->tty);
- task_unlock(current);
+ tty = get_current_tty();
+ if (tty)
+ log_exec(argv, tty);
mutex_unlock(&tty_mutex);
#endif
error = do_execve(file, argv, env, ¤t->thread.regs);
-obj-y = bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
+obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
ptrace_user.o setjmp.o signal.o sigcontext.o syscalls.o sysrq.o \
sys_call_table.o tls.o
--- /dev/null
+/*
+ * Copyright (C) 2006 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL V2
+ */
+
+#include <linux/uaccess.h>
+
+/* Mostly copied from i386/x86_86 - eliminated the eip < PAGE_OFFSET because
+ * that's not relevent in skas mode.
+ */
+
+int is_valid_bugaddr(unsigned long eip)
+{
+ unsigned short ud2;
+
+ if (probe_kernel_address((unsigned short __user *)eip, ud2))
+ return 0;
+
+ return ud2 == 0x0b0f;
+}
struct ptrace_ldt ptrace_ldt = (struct ptrace_ldt) {
.func = 0,
.bytecount = bytecount,
- .ptr = (void *)kmalloc(bytecount, GFP_KERNEL)};
+ .ptr = kmalloc(bytecount, GFP_KERNEL)};
u32 cpu;
if(ptrace_ldt.ptr == NULL)
host_ldt_entries = dummy_list;
else {
size = (size + 1) * sizeof(dummy_list[0]);
- host_ldt_entries = (short *)kmalloc(size, GFP_KERNEL);
+ host_ldt_entries = kmalloc(size, GFP_KERNEL);
if(host_ldt_entries == NULL) {
printk("ldt_get_host_info: couldn't allocate host ldt list\n");
goto out_free;
# Licensed under the GPL
#
-obj-y = bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \
+obj-y = bug.o bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \
setjmp.o sigcontext.o signal.o syscalls.o syscall_table.o sysrq.o \
ksyms.o tls.o
--- /dev/null
+/*
+ * Copyright (C) 2006 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL V2
+ */
+
+#include <linux/uaccess.h>
+
+/* Mostly copied from i386/x86_86 - eliminated the eip < PAGE_OFFSET because
+ * that's not relevent in skas mode.
+ */
+
+int is_valid_bugaddr(unsigned long eip)
+{
+ unsigned short ud2;
+
+ if (probe_kernel_address((unsigned short __user *)eip, ud2))
+ return 0;
+
+ return ud2 == 0x0b0f;
+}
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
# Turn off some random 386 crap that can affect device config
config ISA
bool
# currently support
config V850E_MA1
bool
- depends RTE_CB_MA1
+ depends on RTE_CB_MA1
default y
# Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
config V850E_TEG
bool
- depends RTE_CB_NB85E
+ depends on RTE_CB_NB85E
default y
# ... and the RTE-V850E/ME2-CB - V850E/ME2
config V850E_ME2
bool
- depends RTE_CB_ME2
+ depends on RTE_CB_ME2
default y
config V850E2_SIM85E2
bool
- depends V850E2_SIM85E2C || V850E2_SIM85E2S
+ depends on V850E2_SIM85E2C || V850E2_SIM85E2S
default y
# V850E2 processors
config V850E2
bool
- depends V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
+ depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
default y
# Boards in the RTE-x-CB series
config RTE_CB
bool
- depends RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
+ depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
default y
config RTE_CB_MULTI
# RTE_CB_NB85E can either have multi ROM support or not, but
# other platforms (currently only RTE_CB_MA1) require it.
prompt "Multi monitor ROM support" if RTE_CB_NB85E
- depends RTE_CB_MA1 || RTE_CB_NB85E
+ depends on RTE_CB_MA1 || RTE_CB_NB85E
default y
config RTE_CB_MULTI_DBTRAP
bool "Pass illegal insn trap / dbtrap to kernel"
- depends RTE_CB_MULTI
+ depends on RTE_CB_MULTI
default n
config RTE_CB_MA1_KSRAM
bool "Kernel in SRAM (limits size of kernel)"
- depends RTE_CB_MA1 && RTE_CB_MULTI
+ depends on RTE_CB_MA1 && RTE_CB_MULTI
default n
config RTE_MB_A_PCI
bool "Mother-A PCI support"
- depends RTE_CB
+ depends on RTE_CB
default y
# The GBUS is used to talk to the RTE-MOTHER-A board
config RTE_GBUS_INT
bool
- depends RTE_MB_A_PCI
+ depends on RTE_MB_A_PCI
default y
# The only PCI bus we support is on the RTE-MOTHER-A board
config ROM_KERNEL
bool "Kernel in ROM"
- depends V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
+ depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
# Some platforms pre-zero memory, in which case the kernel doesn't need to
config ZERO_BSS
config V850E_HIGHRES_TIMER
bool "High resolution timer support"
- depends V850E_TIMER_D
+ depends on V850E_TIMER_D
config TIME_BOOTUP
bool "Time bootup"
- depends V850E_HIGHRES_TIMER
+ depends on V850E_HIGHRES_TIMER
config RESET_GUARD
bool "Reset Guard"
bool
default y
+config GENERIC_BUG
+ bool
+ default y
+ depends on BUG
+
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
source "init/Kconfig"
If unsure, say Y. Only embedded should say N here.
config CC_STACKPROTECTOR
- bool "Enable -fstack-protector buffer overflow detection (EXPRIMENTAL)"
+ bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
This option turns on the -fstack-protector GCC feature. This
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-git7
-# Wed Dec 6 23:50:47 2006
+# Linux kernel version: 2.6.19-git14
+# Sat Dec 9 21:23:09 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_REORDER is not set
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-CONFIG_OSS_OBSOLETE_DRIVER=y
# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_ES1371 is not set
CONFIG_SOUND_ICH=y
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_OSS is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HID_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
CONFIG_NLS_UTF8=y
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Instrumentation Support
#
CONFIG_PROFILING=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != OMAGIC &&
N_MAGIC(ex) != QMAGIC && N_MAGIC(ex) != NMAGIC) ||
N_TRSIZE(ex) || N_DRSIZE(ex) ||
- i_size_read(bprm->file->f_dentry->d_inode) < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
+ i_size_read(bprm->file->f_path.dentry->d_inode) < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
return -ENOEXEC;
}
{
printk(KERN_WARNING
"fd_offset is not page aligned. Please convert program: %s\n",
- bprm->file->f_dentry->d_name.name);
+ bprm->file->f_path.dentry->d_name.name);
error_time = jiffies;
}
#endif
int retval;
struct exec ex;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
retval = -ENOEXEC;
error = kernel_read(file, 0, (char *) &ex, sizeof(ex));
{
printk(KERN_WARNING
"N_TXTOFF is not page aligned. Please convert library: %s\n",
- file->f_dentry->d_name.name);
+ file->f_path.dentry->d_name.name);
error_time = jiffies;
}
#endif
default y
config X86_SPEEDSTEP_CENTRINO
- tristate "Intel Enhanced SpeedStep"
+ tristate "Intel Enhanced SpeedStep (deprecated)"
select CPU_FREQ_TABLE
depends on ACPI_PROCESSOR
help
+ This is deprecated and this functionality is now merged into
+ acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+ speedstep_centrino.
This adds the CPUFreq driver for Enhanced SpeedStep enabled
mobile CPUs. This means Intel Pentium M (Centrino) CPUs
or 64bit enabled Intel Xeons.
help
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
+ This driver also supports Intel Enhanced Speedstep.
For details, take a look at <file:Documentation/cpu-freq/>.
SRCDIR := ../../../i386/kernel/cpu/cpufreq
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
-obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
+obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <linux/bug.h>
#include <asm/system.h>
#include <asm/page.h>
lseg, lseg + locks->sh_size,
tseg, tseg + text->sh_size);
}
- return 0;
+
+ return module_bug_finalize(hdr, sechdrs, me);
}
void module_arch_cleanup(struct module *mod)
{
alternatives_smp_module_del(mod);
+ module_bug_cleanup(mod);
}
nmi_watchdog = NMI_IO_APIC;
}
+static int endflag __initdata = 0;
+
#ifdef CONFIG_SMP
/* The performance counters used by NMI_LOCAL_APIC don't trigger when
* the CPU is idle. To make sure the NMI watchdog really ticks on all
*/
static __init void nmi_cpu_busy(void *data)
{
- volatile int *endflag = data;
local_irq_enable_in_hardirq();
/* Intentionally don't use cpu_relax here. This is
to make sure that the performance counter really ticks,
pause instruction. On a real HT machine this is fine because
all other CPUs are busy with "useless" delay loops and don't
care if they get somewhat less cycles. */
- while (*endflag == 0)
- barrier();
+ while (endflag == 0)
+ mb();
}
#endif
int __init check_nmi_watchdog (void)
{
- volatile int endflag = 0;
int *counts;
int cpu;
if (!atomic_read(&nmi_active)) {
kfree(counts);
atomic_set(&nmi_active, -1);
+ endflag = 1;
return -1;
}
endflag = 1;
#include <linux/kexec.h>
#include <linux/unwind.h>
#include <linux/uaccess.h>
+#include <linux/bug.h>
#include <asm/system.h>
#include <asm/io.h>
printk("\n");
}
-void handle_BUG(struct pt_regs *regs)
-{
- struct bug_frame f;
- long len;
- const char *prefix = "";
+int is_valid_bugaddr(unsigned long rip)
+{
+ unsigned short ud2;
- if (user_mode(regs))
- return;
- if (__copy_from_user(&f, (const void __user *) regs->rip,
- sizeof(struct bug_frame)))
- return;
- if (f.filename >= 0 ||
- f.ud2[0] != 0x0f || f.ud2[1] != 0x0b)
- return;
- len = __strnlen_user((char *)(long)f.filename, PATH_MAX) - 1;
- if (len < 0 || len >= PATH_MAX)
- f.filename = (int)(long)"unmapped filename";
- else if (len > 50) {
- f.filename += len - 50;
- prefix = "...";
- }
- printk("----------- [cut here ] --------- [please bite here ] ---------\n");
- printk(KERN_ALERT "Kernel BUG at %s%.50s:%d\n", prefix, (char *)(long)f.filename, f.line);
-}
+ if (__copy_from_user(&ud2, (const void __user *) rip, sizeof(ud2)))
+ return 0;
+
+ return ud2 == 0x0b0f;
+}
#ifdef CONFIG_BUG
void out_of_line_bug(void)
{
unsigned long flags = oops_begin();
- handle_BUG(regs);
+ if (!user_mode(regs))
+ report_bug(regs->rip);
+
__die(str, regs, err);
oops_end(flags);
do_exit(SIGSEGV);
OUTPUT_ARCH(i386:x86-64)
ENTRY(phys_startup_64)
jiffies_64 = jiffies;
+_proxy_pda = 0;
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
data PT_LOAD FLAGS(7); /* RWE */
RODATA
+ BUG_TABLE
+
. = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */
/* Data */
.data : AT(ADDR(.data) - LOAD_OFFSET) {
static int vsyscall_sysctl_nostrat(ctl_table *t, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval, size_t newlen)
{
return -ENOSYS;
}
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
source "init/Kconfig"
menu "Processor type and features"
choice
prompt "Xtensa Processor Configuration"
- default XTENSA_CPU_LINUX_BE
+ default XTENSA_VARIANT_FSF
-config XTENSA_CPU_LINUX_BE
- bool "linux_be"
- ---help---
- The linux_be processor configuration is the baseline Xtensa
- configurations included in this kernel and also used by
- binutils, gcc, and gdb. It contains no TIE, no coprocessors,
- and the following configuration options:
-
- Code Density Option 2 Misc Special Registers
- NSA/NSAU Instructions 128-bit Data Bus Width
- Processor ID 8K, 2-way I and D Caches
- Zero-Overhead Loops 2 Inst Address Break Registers
- Big Endian 2 Data Address Break Registers
- 64 General-Purpose Registers JTAG Interface and Trace Port
- 17 Interrupts MMU w/ TLBs and Autorefill
- 3 Interrupt Levels 8 Autorefill Ways (I/D TLBs)
- 3 Timers Unaligned Exceptions
+config XTENSA_VARIANT_FSF
+ bool "fsf"
endchoice
config MMU
# this architecture
# Core configuration.
-# (Use CPU=<xtensa_config> to use another default compiler.)
+# (Use VAR=<xtensa_config> to use another default compiler.)
-cpu-$(CONFIG_XTENSA_CPU_LINUX_BE) := linux_be
-cpu-$(CONFIG_XTENSA_CPU_LINUX_CUSTOM) := linux_custom
+variant-$(CONFIG_XTENSA_VARIANT_FSF) := fsf
+variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM) := custom
-CPU = $(cpu-y)
-export CPU
+VARIANT = $(variant-y)
+export VARIANT
# Platform configuration
PLATFORM = $(platform-y)
export PLATFORM
-CPPFLAGS += $(if $(KBUILD_SRC),-I$(srctree)/include/asm-xtensa/)
-CPPFLAGS += -Iinclude/asm
CFLAGS += -pipe -mlongcalls
KBUILD_DEFCONFIG := iss_defconfig
# Test for cross compiling
-ifneq ($(CPU),)
+ifneq ($(VARIANT),)
COMPILE_ARCH = $(shell uname -m)
ifneq ($(COMPILE_ARCH), xtensa)
ifndef CROSS_COMPILE
- CROSS_COMPILE = xtensa_$(CPU)-
+ CROSS_COMPILE = xtensa_$(VARIANT)-
endif
endif
endif
archprepare: $(archinc)/.platform
-# Update machine cpu and platform symlinks if something which affects
+# Update processor variant and platform symlinks if something which affects
# them changed.
$(archinc)/.platform: $(wildcard include/config/arch/*.h) include/config/auto.conf
- @echo ' SYMLINK $(archinc)/xtensa/config -> $(archinc)/xtensa/config-$(CPU)'
+ @echo ' SYMLINK $(archinc)/variant -> $(archinc)/variant-$(VARIANT)'
$(Q)mkdir -p $(archinc)
- $(Q)mkdir -p $(archinc)/xtensa
- $(Q)ln -fsn $(srctree)/$(archinc)/xtensa/config-$(CPU) $(archinc)/xtensa/config
+ $(Q)ln -fsn $(srctree)/$(archinc)/variant-$(VARIANT) $(archinc)/variant
@echo ' SYMLINK $(archinc)/platform -> $(archinc)/platform-$(PLATFORM)'
$(Q)ln -fsn $(srctree)/$(archinc)/platform-$(PLATFORM) $(archinc)/platform
@touch $@
$(Q)$(MAKE) $(build)=$(boot) $@
CLEAN_FILES += arch/xtensa/vmlinux.lds \
- $(archinc)/platform $(archinc)/xtensa/config \
+ $(archinc)/platform $(archinc)/variant \
$(archinc)/.platform
define archhelp
-#include <xtensa/config/specreg.h>
-#include <xtensa/config/core.h>
-
#include <asm/bootparam.h>
-
-#define _ASMLANGUAGE
-#include <xtensa/config/specreg.h>
-#include <xtensa/config/core.h>
-#include <xtensa/cacheasm.h>
-
+#include <asm/variant/core.h>
+#include <asm/regs.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheasm.h>
/*
* RB-Data: RedBoot data/bss
* P: Boot-Parameters
/* Note: The assembler cannot relax "addi a0, a0, ..." to an
l32r, so we load to a4 first. */
- addi a4, a0, __start - __start_a0
- mov a0, a4
+ # addi a4, a0, __start - __start_a0
+ # mov a0, a4
+
+ movi a4, __start
+ movi a5, __start_a0
+ add a4, a0, a4
+ sub a0, a4, a5
+
movi a4, __start
movi a5, __reloc_end
/* We have to flush and invalidate the caches here before we jump. */
#if XCHAL_DCACHE_IS_WRITEBACK
- dcache_writeback_all a5, a6
+
+ ___flush_dcache_all a5 a6
+
#endif
- icache_invalidate_all a5, a6
+
+ ___invalidate_icache_all a5 a6
+ isync
movi a11, _reloc
jx a11
/* jump to the kernel */
2:
#if XCHAL_DCACHE_IS_WRITEBACK
- dcache_writeback_all a5, a6
+
+ ___flush_dcache_all a5 a6
+
#endif
- icache_invalidate_all a5, a6
+
+ ___invalidate_icache_all a5 a6
+
+ isync
movi a5, __start
movi a3, boot_initrd_start
#
# Processor type and features
#
-CONFIG_XTENSA_ARCH_LINUX_BE=y
-# CONFIG_XTENSA_ARCH_LINUX_LE is not set
-# CONFIG_XTENSA_ARCH_LINUX_TEST is not set
-# CONFIG_XTENSA_ARCH_S5 is not set
-# CONFIG_XTENSA_CUSTOM is not set
+CONFIG_XTENSA_VARIANT_FSF=y
CONFIG_MMU=y
# CONFIG_XTENSA_UNALIGNED_USER is not set
# CONFIG_PREEMPT is not set
obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o semaphore.o \
- setup.o signal.o syscalls.o time.o traps.o vectors.o platform.o \
+ setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \
pci-dma.o
## windowspill.o
*/
#include <linux/linkage.h>
-#include <asm/ptrace.h>
-#include <asm/ptrace.h>
#include <asm/current.h>
#include <asm/asm-offsets.h>
-#include <asm/pgtable.h>
#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/thread_info.h>
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
extui a5, a4, INSN_OP0, 4 # get insn.op0 nibble
-#if XCHAL_HAVE_NARROW
+#if XCHAL_HAVE_DENSITY
_beqi a5, OP0_L32I_N, .Lload # L32I.N, jump
addi a6, a5, -OP0_S32I_N
_beqz a6, .Lstore # S32I.N, do a store
#endif
__src_b a3, a5, a6 # a3 has the data word
-#if XCHAL_HAVE_NARROW
+#if XCHAL_HAVE_DENSITY
addi a7, a7, 2 # increment PC (assume 16-bit insn)
extui a5, a4, INSN_OP0, 4
1:
-#if XCHAL_HAVE_LOOP
- rsr a3, LEND # check if we reached LEND
- bne a7, a3, 1f
- rsr a3, LCOUNT # and LCOUNT != 0
- beqz a3, 1f
- addi a3, a3, -1 # decrement LCOUNT and set
+#if XCHAL_HAVE_LOOPS
+ rsr a5, LEND # check if we reached LEND
+ bne a7, a5, 1f
+ rsr a5, LCOUNT # and LCOUNT != 0
+ beqz a5, 1f
+ addi a5, a5, -1 # decrement LCOUNT and set
rsr a7, LBEG # set PC to LBEGIN
- wsr a3, LCOUNT
+ wsr a5, LCOUNT
#endif
1: wsr a7, EPC_1 # skip load instruction
movi a6, 0 # mask: ffffffff:00000000
-#if XCHAL_HAVE_NARROW
+#if XCHAL_HAVE_DENSITY
addi a7, a7, 2 # incr. PC,assume 16-bit instruction
extui a5, a4, INSN_OP0, 4 # extract OP0
/* Get memory address */
1:
-#if XCHAL_HAVE_LOOP
- rsr a3, LEND # check if we reached LEND
- bne a7, a3, 1f
- rsr a3, LCOUNT # and LCOUNT != 0
- beqz a3, 1f
- addi a3, a3, -1 # decrement LCOUNT and set
+#if XCHAL_HAVE_LOOPS
+ rsr a4, LEND # check if we reached LEND
+ bne a7, a4, 1f
+ rsr a4, LCOUNT # and LCOUNT != 0
+ beqz a4, 1f
+ addi a4, a4, -1 # decrement LCOUNT and set
rsr a7, LBEG # set PC to LBEGIN
- wsr a3, LCOUNT
+ wsr a4, LCOUNT
#endif
1: wsr a7, EPC_1 # skip store instruction
/* Restore working register */
+ l32i a8, a2, PT_AREG8
l32i a7, a2, PT_AREG7
l32i a6, a2, PT_AREG6
l32i a5, a2, PT_AREG5
mov a1, a2
rsr a0, PS
- bbsi.l a2, PS_UM_SHIFT, 1f # jump if user mode
+ bbsi.l a2, PS_UM_BIT, 1f # jump if user mode
movi a0, _kernel_exception
jx a0
DEFINE(MM_CONTEXT, offsetof (struct mm_struct, context));
BLANK();
DEFINE(PT_SINGLESTEP_BIT, PT_SINGLESTEP_BIT);
+
+ /* constants */
+ DEFINE(_CLONE_VM, CLONE_VM);
+ DEFINE(_CLONE_UNTRACED, CLONE_UNTRACED);
+
return 0;
}
rsync
retw
-#endif
ENTRY(save_coprocessor_extra)
entry sp, 16
XCHAL_CP7_SA_CONTENTS_LIBDB
.word 0xFC000000 /* invalid register number,marks end of table*/
_xtensa_reginfo_table_end:
+#endif
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/signal.h>
-#include <xtensa/coreasm.h>
+#include <asm/tlbflush.h>
/* Unimplemented features. */
movi a2, 1
extui a3, a3, 0, 1 # a3 = PS.INTLEVEL[0]
moveqz a3, a2, a0 # a3 = 1 iff interrupt exception
- movi a2, PS_WOE_MASK
+ movi a2, 1 << PS_WOE_BIT
or a3, a3, a2
rsr a0, EXCCAUSE
xsr a3, PS
/* Jump if we are returning from kernel exceptions. */
1: l32i a3, a1, PT_PS
- _bbsi.l a3, PS_UM_SHIFT, 2f
+ _bbsi.l a3, PS_UM_BIT, 2f
j kernel_exception_exit
/* Specific to a user exception exit:
* (Hint: There is only one user exception frame on stack)
*/
- movi a3, PS_WOE_MASK
+ movi a3, 1 << PS_WOE_BIT
_bbsi.l a4, TIF_NEED_RESCHED, 3f
_bbci.l a4, TIF_SIGPENDING, 4f
ENTRY(debug_exception)
rsr a0, EPS + XCHAL_DEBUGLEVEL
- bbsi.l a0, PS_EXCM_SHIFT, 1f # exception mode
+ bbsi.l a0, PS_EXCM_BIT, 1f # exception mode
/* Set EPC_1 and EXCCAUSE */
/* Restore PS to the value before the debug exc but with PS.EXCM set.*/
- movi a2, 1 << PS_EXCM_SHIFT
+ movi a2, 1 << PS_EXCM_BIT
or a2, a0, a2
movi a0, debug_exception # restore a3, debug jump vector
wsr a2, PS
/* Switch to kernel/user stack, restore jump vector, and save a0 */
- bbsi.l a2, PS_UM_SHIFT, 2f # jump if user mode
+ bbsi.l a2, PS_UM_BIT, 2f # jump if user mode
addi a2, a1, -16-PT_SIZE # assume kernel stack
s32i a0, a2, PT_AREG0
wsr a1, WINDOWBASE
rsync
- movi a1, PS_WOE_MASK | 1
+ movi a1, (1 << PS_WOE_BIT) | 1
wsr a1, PS
rsync
rsr a0, DEPC # get syscall-nr
_beqz a0, fast_syscall_spill_registers
-
- addi a0, a0, -__NR_sysxtensa
- _beqz a0, fast_syscall_sysxtensa
+ _beqi a0, __NR_xtensa, fast_syscall_xtensa
j kernel_exception
-
ENTRY(fast_syscall_user)
/* Skip syscall. */
rsr a0, DEPC # get syscall-nr
_beqz a0, fast_syscall_spill_registers
-
- addi a0, a0, -__NR_sysxtensa
- _beqz a0, fast_syscall_sysxtensa
+ _beqi a0, __NR_xtensa, fast_syscall_xtensa
j user_exception
/*
* sysxtensa syscall handler
*
- * int sysxtensa (XTENSA_ATOMIC_SET, ptr, val, unused);
- * int sysxtensa (XTENSA_ATOMIC_ADD, ptr, val, unused);
- * int sysxtensa (XTENSA_ATOMIC_EXG_ADD, ptr, val, unused);
- * int sysxtensa (XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
- * a2 a6 a3 a4 a5
+ * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
+ * a2 a6 a3 a4 a5
*
* Entry condition:
*
- * a0: trashed, original value saved on stack (PT_AREG0)
+ * a0: a2 (syscall-nr), original value saved on stack (PT_AREG0)
* a1: a1
- * a2: new stack pointer, original in DEPC
- * a3: dispatch table
+ * a2: new stack pointer, original in a0 and DEPC
+ * a3: dispatch table, original in excsave_1
+ * a4..a15: unchanged
* depc: a2, original value saved on stack (PT_DEPC)
* excsave_1: a3
*
#define CATCH \
67:
-ENTRY(fast_syscall_sysxtensa)
-
- _beqz a6, 1f
- _blti a6, SYSXTENSA_COUNT, 2f
+ENTRY(fast_syscall_xtensa)
-1: j user_exception
-
-2: xsr a3, EXCSAVE_1 # restore a3, excsave1
- s32i a7, a2, PT_AREG7
+ xsr a3, EXCSAVE_1 # restore a3, excsave1
+ s32i a7, a2, PT_AREG7 # we need an additional register
movi a7, 4 # sizeof(unsigned int)
- access_ok a0, a3, a7, a2, .Leac
+ access_ok a3, a7, a0, a2, .Leac # a0: scratch reg, a2: sp
- _beqi a6, SYSXTENSA_ATOMIC_SET, .Lset
- _beqi a6, SYSXTENSA_ATOMIC_EXG_ADD, .Lexg
- _beqi a6, SYSXTENSA_ATOMIC_ADD, .Ladd
+ addi a6, a6, -1 # assuming SYS_XTENSA_ATOMIC_SET = 1
+ _bgeui a6, SYS_XTENSA_COUNT - 1, .Lill
+ _bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP - 1, .Lnswp
- /* Fall through for SYSXTENSA_ATOMIC_CMP_SWP */
+ /* Fall through for ATOMIC_CMP_SWP. */
.Lswp: /* Atomic compare and swap */
-TRY l32i a7, a3, 0 # read old value
- bne a7, a4, 1f # same as old value? jump
- s32i a5, a3, 0 # different, modify value
- movi a7, 1 # and return 1
- j .Lret
-
-1: movi a7, 0 # same values: return 0
- j .Lret
-
-.Ladd: /* Atomic add */
-.Lexg: /* Atomic (exchange) add */
+TRY l32i a0, a3, 0 # read old value
+ bne a0, a4, 1f # same as old value? jump
+TRY s32i a5, a3, 0 # different, modify value
+ l32i a7, a2, PT_AREG7 # restore a7
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, 1 # and return 1
+ addi a6, a6, 1 # restore a6 (really necessary?)
+ rfe
-TRY l32i a7, a3, 0
- add a4, a4, a7
- s32i a4, a3, 0
- j .Lret
+1: l32i a7, a2, PT_AREG7 # restore a7
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, 0 # return 0 (note that we cannot set
+ addi a6, a6, 1 # restore a6 (really necessary?)
+ rfe
-.Lset: /* Atomic set */
+.Lnswp: /* Atomic set, add, and exg_add. */
-TRY l32i a7, a3, 0 # read old value as return value
- s32i a4, a3, 0 # write new value
+TRY l32i a7, a3, 0 # orig
+ add a0, a4, a7 # + arg
+ moveqz a0, a4, a6 # set
+TRY s32i a0, a3, 0 # write new value
-.Lret: mov a0, a2
+ mov a0, a2
mov a2, a7
- l32i a7, a0, PT_AREG7
- l32i a3, a0, PT_AREG3
- l32i a0, a0, PT_AREG0
+ l32i a7, a0, PT_AREG7 # restore a7
+ l32i a0, a0, PT_AREG0 # restore a0
+ addi a6, a6, 1 # restore a6 (really necessary?)
rfe
CATCH
-.Leac: movi a7, -EFAULT
- j .Lret
+.Leac: l32i a7, a2, PT_AREG7 # restore a7
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -EFAULT
+ rfe
+
+.Lill: l32i a7, a2, PT_AREG0 # restore a7
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -EINVAL
+ rfe
+
*/
rsr a0, PS
- _bbci.l a0, PS_UM_SHIFT, 1f
+ _bbci.l a0, PS_UM_BIT, 1f
/* User space: Setup a dummy frame and kill application.
* Note: We assume EXC_TABLE_KSTK contains a valid stack pointer.
l32i a1, a3, EXC_TABLE_KSTK
wsr a3, EXCSAVE_1
- movi a4, PS_WOE_MASK | 1
+ movi a4, (1 << PS_WOE_BIT) | 1
wsr a4, PS
rsync
rsr a1, PTEVADDR
srli a1, a1, PAGE_SHIFT
slli a1, a1, PAGE_SHIFT # ptevaddr & PAGE_MASK
- addi a1, a1, DTLB_WAY_PGTABLE # ... + way_number
+ addi a1, a1, DTLB_WAY_PGD # ... + way_number
wdtlb a0, a1
dsync
mov a1, a2
rsr a2, PS
- bbsi.l a2, PS_UM_SHIFT, 1f
+ bbsi.l a2, PS_UM_BIT, 1f
j _kernel_exception
1: j _user_exception
mov a1, a2
rsr a2, PS
- bbsi.l a2, PS_UM_SHIFT, 1f
+ bbsi.l a2, PS_UM_BIT, 1f
j _kernel_exception
1: j _user_exception
#endif /* XCHAL_EXTRA_SA_SIZE */
/*
+ * System Calls.
+ *
+ * void system_call (struct pt_regs* regs, int exccause)
+ * a2 a3
+ */
+
+ENTRY(system_call)
+ entry a1, 32
+
+ /* regs->syscall = regs->areg[2] */
+
+ l32i a3, a2, PT_AREG2
+ mov a6, a2
+ movi a4, do_syscall_trace_enter
+ s32i a3, a2, PT_SYSCALL
+ callx4 a4
+
+ /* syscall = sys_call_table[syscall_nr] */
+
+ movi a4, sys_call_table;
+ movi a5, __NR_syscall_count
+ movi a6, -ENOSYS
+ bgeu a3, a5, 1f
+
+ addx4 a4, a3, a4
+ l32i a4, a4, 0
+ movi a5, sys_ni_syscall;
+ beq a4, a5, 1f
+
+ /* Load args: arg0 - arg5 are passed via regs. */
+
+ l32i a6, a2, PT_AREG6
+ l32i a7, a2, PT_AREG3
+ l32i a8, a2, PT_AREG4
+ l32i a9, a2, PT_AREG5
+ l32i a10, a2, PT_AREG8
+ l32i a11, a2, PT_AREG9
+
+ /* Pass one additional argument to the syscall: pt_regs (on stack) */
+ s32i a2, a1, 0
+
+ callx4 a4
+
+1: /* regs->areg[2] = return_value */
+
+ s32i a6, a2, PT_AREG2
+ movi a4, do_syscall_trace_leave
+ mov a6, a2
+ callx4 a4
+ retw
+
+
+/*
+ * Create a kernel thread
+ *
+ * int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+ * a2 a2 a3 a4
+ */
+
+ENTRY(kernel_thread)
+ entry a1, 16
+
+ mov a5, a2 # preserve fn over syscall
+ mov a7, a3 # preserve args over syscall
+
+ movi a3, _CLONE_VM | _CLONE_UNTRACED
+ movi a2, __NR_clone
+ or a6, a4, a3 # arg0: flags
+ mov a3, a1 # arg1: sp
+ syscall
+
+ beq a3, a1, 1f # branch if parent
+ mov a6, a7 # args
+ callx4 a5 # fn(args)
+
+ movi a2, __NR_exit
+ syscall # return value of fn(args) still in a6
+
+1: retw
+
+/*
+ * Do a system call from kernel instead of calling sys_execve, so we end up
+ * with proper pt_regs.
+ *
+ * int kernel_execve(const char *fname, char *const argv[], charg *const envp[])
+ * a2 a2 a3 a4
+ */
+
+ENTRY(kernel_execve)
+ entry a1, 16
+ mov a6, a2 # arg0 is in a6
+ movi a2, __NR_execve
+ syscall
+
+ retw
+
+/*
* Task switch.
*
* struct task* _switch_to (struct task* prev, struct task* next)
/* Disable ints while we manipulate the stack pointer; spill regs. */
- movi a5, PS_EXCM_MASK | LOCKLEVEL
+ movi a5, (1 << PS_EXCM_BIT) | LOCKLEVEL
xsr a5, PS
rsr a3, EXCSAVE_1
rsync
movi a4, schedule_tail
callx4 a4
- movi a4, do_syscall_trace
+ movi a4, do_syscall_trace_leave
+ mov a6, a1
callx4 a4
j common_exception_return
-
-
-/*
- * Table of syscalls
- */
-
-.data
-.align 4
-.global sys_call_table
-sys_call_table:
-
-#define SYSCALL(call, narg) .word call
-#include "syscalls.h"
-
-/*
- * Number of arguments of each syscall
- */
-
-.global sys_narg_table
-sys_narg_table:
-
-#undef SYSCALL
-#define SYSCALL(call, narg) .byte narg
-#include "syscalls.h"
-
* Kevin Chea
*/
-#include <xtensa/cacheasm.h>
#include <asm/processor.h>
#include <asm/page.h>
+#include <asm/cacheasm.h>
/*
* This module contains the entry code for kernel images. It performs the
*
*/
- .macro iterate from, to , cmd
- .ifeq ((\to - \from) & ~0xfff)
- \cmd \from
- iterate "(\from+1)", \to, \cmd
- .endif
- .endm
-
/*
* _start
*
/* Disable interrupts and exceptions. */
- movi a0, XCHAL_PS_EXCM_MASK
+ movi a0, LOCKLEVEL
wsr a0, PS
/* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
movi a1, 15
wsr a0, ICOUNTLEVEL
- .macro reset_dbreak num
- wsr a0, DBREAKC + \num
- .endm
-
- iterate 0, XCHAL_NUM_IBREAK-1, reset_dbreak
+ .set _index, 0
+ .rept XCHAL_NUM_DBREAK - 1
+ wsr a0, DBREAKC + _index
+ .set _index, _index + 1
+ .endr
#endif
/* Clear CCOUNT (not really necessary, but nice) */
/* Disable all timers. */
- .macro reset_timer num
- wsr a0, CCOMPARE_0 + \num
- .endm
- iterate 0, XCHAL_NUM_TIMERS-1, reset_timer
+ .set _index, 0
+ .rept XCHAL_NUM_TIMERS - 1
+ wsr a0, CCOMPARE + _index
+ .set _index, _index + 1
+ .endr
/* Interrupt initialization. */
rsync
/* Initialize the caches.
- * Does not include flushing writeback d-cache.
- * a6, a7 are just working registers (clobbered).
+ * a2, a3 are just working registers (clobbered).
*/
- icache_reset a2, a3
- dcache_reset a2, a3
+#if XCHAL_DCACHE_LINE_LOCKABLE
+ ___unlock_dcache_all a2 a3
+#endif
+
+#if XCHAL_ICACHE_LINE_LOCKABLE
+ ___unlock_icache_all a2 a3
+#endif
+
+ ___invalidate_dcache_all a2 a3
+ ___invalidate_icache_all a2 a3
+
+ isync
/* Unpack data sections
*
movi a2, _bss_start # start of BSS
movi a3, _bss_end # end of BSS
-1: addi a2, a2, 4
+ __loopt a2, a3, a4, 2
s32i a0, a2, 0
- blt a2, a3, 1b
+ __endla a2, a4, 4
#if XCHAL_DCACHE_IS_WRITEBACK
* instructions/data are available.
*/
- dcache_writeback_all a2, a3
+ ___flush_dcache_all a2 a3
#endif
/* Setup stack and enable window exceptions (keep irqs disabled) */
* Xtensa built-in interrupt controller and some generic functions copied
* from i386.
*
- * Copyright (C) 2002 - 2005 Tensilica, Inc.
+ * Copyright (C) 2002 - 2006 Tensilica, Inc.
* Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
*
*
#include <asm/uaccess.h>
#include <asm/platform.h>
-static void enable_xtensa_irq(unsigned int irq);
-static void disable_xtensa_irq(unsigned int irq);
-static void mask_and_ack_xtensa(unsigned int irq);
-static void end_xtensa_irq(unsigned int irq);
-
static unsigned int cached_irq_mask;
atomic_t irq_err_count;
* handlers).
*/
-unsigned int do_IRQ(int irq, struct pt_regs *regs)
+asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ struct irq_desc *desc = irq_desc + irq;
+
+ if (irq >= NR_IRQS) {
+ printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
+ __FUNCTION__, irq);
+ }
+
irq_enter();
#ifdef CONFIG_DEBUG_STACKOVERFLOW
sp - sizeof(struct thread_info));
}
#endif
-
- __do_IRQ(irq, regs);
+ desc->handle_irq(irq, desc);
irq_exit();
-
- return 1;
+ set_irq_regs(old_regs);
}
/*
}
return 0;
}
-/* shutdown is same as "disable" */
-#define shutdown_xtensa_irq disable_xtensa_irq
-static unsigned int startup_xtensa_irq(unsigned int irq)
-{
- enable_xtensa_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type xtensa_irq_type = {
- "Xtensa-IRQ",
- startup_xtensa_irq,
- shutdown_xtensa_irq,
- enable_xtensa_irq,
- disable_xtensa_irq,
- mask_and_ack_xtensa,
- end_xtensa_irq
-};
-
-static inline void mask_irq(unsigned int irq)
+static void xtensa_irq_mask(unsigned int irq)
{
cached_irq_mask &= ~(1 << irq);
set_sr (cached_irq_mask, INTENABLE);
}
-static inline void unmask_irq(unsigned int irq)
+static void xtensa_irq_unmask(unsigned int irq)
{
cached_irq_mask |= 1 << irq;
set_sr (cached_irq_mask, INTENABLE);
}
-static void disable_xtensa_irq(unsigned int irq)
+static void xtensa_irq_ack(unsigned int irq)
{
- unsigned long flags;
- local_save_flags(flags);
- mask_irq(irq);
- local_irq_restore(flags);
+ set_sr(1 << irq, INTCLEAR);
}
-static void enable_xtensa_irq(unsigned int irq)
+static int xtensa_irq_retrigger(unsigned int irq)
{
- unsigned long flags;
- local_save_flags(flags);
- unmask_irq(irq);
- local_irq_restore(flags);
-}
-
-static void mask_and_ack_xtensa(unsigned int irq)
-{
- disable_xtensa_irq(irq);
+ set_sr (1 << irq, INTSET);
+ return 1;
}
-static void end_xtensa_irq(unsigned int irq)
-{
- enable_xtensa_irq(irq);
-}
+static struct irq_chip xtensa_irq_chip = {
+ .name = "xtensa",
+ .mask = xtensa_irq_mask,
+ .unmask = xtensa_irq_unmask,
+ .ack = xtensa_irq_ack,
+ .retrigger = xtensa_irq_retrigger,
+};
void __init init_IRQ(void)
{
- int i;
+ int index;
- for (i=0; i < XTENSA_NR_IRQS; i++)
- irq_desc[i].chip = &xtensa_irq_type;
+ for (index = 0; index < XTENSA_NR_IRQS; index++) {
+ int mask = 1 << index;
- cached_irq_mask = 0;
+ if (mask & XCHAL_INTTYPE_MASK_SOFTWARE)
+ set_irq_chip_and_handler(index, &xtensa_irq_chip,
+ handle_simple_irq);
- platform_init_irq();
+ else if (mask & XCHAL_INTTYPE_MASK_EXTERN_EDGE)
+ set_irq_chip_and_handler(index, &xtensa_irq_chip,
+ handle_edge_irq);
+
+ else if (mask & XCHAL_INTTYPE_MASK_EXTERN_LEVEL)
+ set_irq_chip_and_handler(index, &xtensa_irq_chip,
+ handle_level_irq);
+
+ else if (mask & XCHAL_INTTYPE_MASK_TIMER)
+ set_irq_chip_and_handler(index, &xtensa_irq_chip,
+ handle_edge_irq);
+
+ else /* XCHAL_INTTYPE_MASK_WRITE_ERROR */
+ /* XCHAL_INTTYPE_MASK_NMI */
+
+ set_irq_chip_and_handler(index, &xtensa_irq_chip,
+ handle_level_irq);
+ }
+
+ cached_irq_mask = 0;
}
/*
- * arch/xtensa/kernel/pci-dma.c
+ * arch/xtensa/pci-dma.c
*
* DMA coherent memory allocation.
*
*/
void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+dma_alloc_coherent(struct device *dev,size_t size,dma_addr_t *handle,gfp_t flag)
{
- void *ret;
+ unsigned long ret;
+ unsigned long uncached = 0;
/* ignore region speicifiers */
- gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
- if (dev == NULL || (*dev->dma_mask < 0xffffffff))
- gfp |= GFP_DMA;
- ret = (void *)__get_free_pages(gfp, get_order(size));
+ flag &= ~(__GFP_DMA | __GFP_HIGHMEM);
- if (ret != NULL) {
- memset(ret, 0, size);
- *handle = virt_to_bus(ret);
+ if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
+ flag |= GFP_DMA;
+ ret = (unsigned long)__get_free_pages(flag, get_order(size));
+
+ if (ret == 0)
+ return NULL;
+
+ /* We currently don't support coherent memory outside KSEG */
+
+ if (ret < XCHAL_KSEG_CACHED_VADDR
+ || ret >= XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE)
+ BUG();
+
+
+ if (ret != 0) {
+ memset((void*) ret, 0, size);
+ uncached = ret+XCHAL_KSEG_BYPASS_VADDR-XCHAL_KSEG_CACHED_VADDR;
+ *handle = virt_to_bus((void*)ret);
+ __flush_invalidate_dcache_range(ret, size);
}
- return (void*) BYPASS_ADDR((unsigned long)ret);
+
+ return (void*)uncached;
}
void dma_free_coherent(struct device *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
- free_pages(CACHED_ADDR((unsigned long)vaddr), get_order(size));
+ long addr=(long)vaddr+XCHAL_KSEG_CACHED_VADDR-XCHAL_KSEG_BYPASS_VADDR;
+
+ if (addr < 0 || addr >= XCHAL_KSEG_SIZE)
+ BUG();
+
+ free_pages(addr, get_order(size));
}
-// TODO verify coprocessor handling
/*
* arch/xtensa/kernel/process.c
*
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/asm-offsets.h>
-#include <asm/coprocessor.h>
+#include <asm/regs.h>
extern void ret_from_fork(void);
EXPORT_SYMBOL(pm_power_off);
-#if XCHAL_CP_NUM > 0
-
-/*
- * Coprocessor ownership.
- */
-
-coprocessor_info_t coprocessor_info[] = {
- { 0, XTENSA_CPE_CP0_OFFSET },
- { 0, XTENSA_CPE_CP1_OFFSET },
- { 0, XTENSA_CPE_CP2_OFFSET },
- { 0, XTENSA_CPE_CP3_OFFSET },
- { 0, XTENSA_CPE_CP4_OFFSET },
- { 0, XTENSA_CPE_CP5_OFFSET },
- { 0, XTENSA_CPE_CP6_OFFSET },
- { 0, XTENSA_CPE_CP7_OFFSET },
-};
-
-#endif
-
/*
* Powermanagement idle function, if any is provided by the platform.
*/
void exit_thread(void)
{
- release_coprocessors(current); /* Empty macro if no CPs are defined */
}
void flush_thread(void)
{
- release_coprocessors(current); /* Empty macro if no CPs are defined */
}
/*
/*
- * Create a kernel thread
- */
-
-int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
-{
- long retval;
- __asm__ __volatile__
- ("mov a5, %4\n\t" /* preserve fn in a5 */
- "mov a6, %3\n\t" /* preserve and setup arg in a6 */
- "movi a2, %1\n\t" /* load __NR_clone for syscall*/
- "mov a3, sp\n\t" /* sp check and sys_clone */
- "mov a4, %5\n\t" /* load flags for syscall */
- "syscall\n\t"
- "beq a3, sp, 1f\n\t" /* branch if parent */
- "callx4 a5\n\t" /* call fn */
- "movi a2, %2\n\t" /* load __NR_exit for syscall */
- "mov a3, a6\n\t" /* load fn return value */
- "syscall\n"
- "1:\n\t"
- "mov %0, a2\n\t" /* parent returns zero */
- :"=r" (retval)
- :"i" (__NR_clone), "i" (__NR_exit),
- "r" (arg), "r" (fn),
- "r" (flags | CLONE_VM)
- : "a2", "a3", "a4", "a5", "a6" );
- return retval;
-}
-
-
-/*
* These bracket the sleeping functions..
*/
*/
elfregs->pc = regs->pc;
- elfregs->ps = (regs->ps & ~XCHAL_PS_EXCM_MASK);
+ elfregs->ps = (regs->ps & ~(1 << PS_EXCM_BIT));
elfregs->exccause = regs->exccause;
elfregs->excvaddr = regs->excvaddr;
elfregs->windowbase = regs->windowbase;
*/
regs->pc = elfregs->pc;
- regs->ps = (elfregs->ps | XCHAL_PS_EXCM_MASK);
+ regs->ps = (elfregs->ps | (1 << PS_EXCM_BIT));
regs->exccause = elfregs->exccause;
regs->excvaddr = elfregs->excvaddr;
regs->windowbase = elfregs->windowbase;
int
dump_task_fpu(struct pt_regs *regs, struct task_struct *task, elf_fpregset_t *r)
{
-/* see asm/coprocessor.h for this magic number 16 */
-#if XTENSA_CP_EXTRA_SIZE > 16
- do_save_fpregs (r, regs, task);
-
- /* For now, bit 16 means some extra state may be present: */
-// FIXME!! need to track to return more accurate mask
- return 0x10000 | XCHAL_CP_MASK;
-#else
return 0; /* no coprocessors active on this processor */
-#endif
}
/*
{
return dump_task_fpu(regs, current, r);
}
+
+asmlinkage
+long xtensa_clone(unsigned long clone_flags, unsigned long newsp,
+ void __user *parent_tid, void *child_tls,
+ void __user *child_tid, long a5,
+ struct pt_regs *regs)
+{
+ if (!newsp)
+ newsp = regs->areg[1];
+ return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
+}
+
+/*
+ * * xtensa_execve() executes a new program.
+ * */
+
+asmlinkage
+long xtensa_execve(char __user *name, char __user * __user *argv,
+ char __user * __user *envp,
+ long a3, long a4, long a5,
+ struct pt_regs *regs)
+{
+ long error;
+ char * filename;
+
+ filename = getname(name);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ // FIXME: release coprocessor??
+ error = do_execve(filename, argv, envp, regs);
+ if (error == 0) {
+ task_lock(current);
+ current->ptrace &= ~PT_DTRACE;
+ task_unlock(current);
+ }
+ putname(filename);
+out:
+ return error;
+}
+
/* Note: PS.EXCM is not set while user task is running;
* its being set in regs is for exception handling
* convenience. */
- tmp = (regs->ps & ~XCHAL_PS_EXCM_MASK);
+ tmp = (regs->ps & ~(1 << PS_EXCM_BIT));
break;
case REG_WB:
tmp = regs->windowbase;
void do_syscall_trace(void)
{
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
-
- if (!(current->ptrace & PT_PTRACED))
- return;
-
/*
* The 0x80 provides a way for the tracing parent to distinguish
* between a syscall stop and SIGTRAP delivery
current->exit_code = 0;
}
}
+
+void do_syscall_trace_enter(struct pt_regs *regs)
+{
+ if (test_thread_flag(TIF_SYSCALL_TRACE)
+ && (current->ptrace & PT_PTRACED))
+ do_syscall_trace();
+
+#if 0
+ if (unlikely(current->audit_context))
+ audit_syscall_entry(current, AUDIT_ARCH_XTENSA..);
+#endif
+}
+
+void do_syscall_trace_leave(struct pt_regs *regs)
+{
+ if ((test_thread_flag(TIF_SYSCALL_TRACE))
+ && (current->ptrace & PT_PTRACED))
+ do_syscall_trace();
+}
+
#include <asm/page.h>
#include <asm/setup.h>
-#include <xtensa/config/system.h>
-
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
#endif
/* high-level stuff */
seq_printf(f,"processor\t: 0\n"
"vendor_id\t: Tensilica\n"
- "model\t\t: Xtensa " XCHAL_HW_RELEASE_NAME "\n"
+ "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n"
"core ID\t\t: " XCHAL_CORE_ID "\n"
"build ID\t: 0x%x\n"
"byte order\t: %s\n"
XCHAL_NUM_TIMERS,
XCHAL_DEBUGLEVEL);
- /* Coprocessors */
-#if XCHAL_HAVE_CP
- seq_printf(f, "coprocessors\t: %d\n", XCHAL_CP_NUM);
-#else
- seq_printf(f, "coprocessors\t: none\n");
-#endif
-
- /* {I,D}{RAM,ROM} and XLMI */
- seq_printf(f,"inst ROMs\t: %d\n"
- "inst RAMs\t: %d\n"
- "data ROMs\t: %d\n"
- "data RAMs\t: %d\n"
- "XLMI ports\t: %d\n",
- XCHAL_NUM_IROM,
- XCHAL_NUM_IRAM,
- XCHAL_NUM_DROM,
- XCHAL_NUM_DRAM,
- XCHAL_NUM_XLMI);
-
/* Cache */
seq_printf(f,"icache line size: %d\n"
"icache ways\t: %d\n"
XCHAL_DCACHE_WAYS,
XCHAL_DCACHE_SIZE);
- /* MMU */
- seq_printf(f,"ASID bits\t: %d\n"
- "ASID invalid\t: %d\n"
- "ASID kernel\t: %d\n"
- "rings\t\t: %d\n"
- "itlb ways\t: %d\n"
- "itlb AR ways\t: %d\n"
- "dtlb ways\t: %d\n"
- "dtlb AR ways\t: %d\n",
- XCHAL_MMU_ASID_BITS,
- XCHAL_MMU_ASID_INVALID,
- XCHAL_MMU_ASID_KERNEL,
- XCHAL_MMU_RINGS,
- XCHAL_ITLB_WAYS,
- XCHAL_ITLB_ARF_WAYS,
- XCHAL_DTLB_WAYS,
- XCHAL_DTLB_ARF_WAYS);
-
return 0;
}
*
*/
-#include <xtensa/config/core.h>
-#include <xtensa/hal.h>
+#include <asm/variant/core.h>
+#include <asm/coprocessor.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
* Atomically swap in the new signal mask, and wait for a signal.
*/
-int sys_sigsuspend(struct pt_regs *regs)
+int xtensa_sigsuspend(struct pt_regs *regs)
{
old_sigset_t mask = (old_sigset_t) regs->areg[3];
sigset_t saveset;
}
asmlinkage int
-sys_rt_sigsuspend(struct pt_regs *regs)
+xtensa_rt_sigsuspend(struct pt_regs *regs)
{
sigset_t *unewset = (sigset_t *) regs->areg[4];
size_t sigsetsize = (size_t) regs->areg[3];
}
asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction *act,
+xtensa_sigaction(int sig, const struct old_sigaction *act,
struct old_sigaction *oact)
{
struct k_sigaction new_ka, old_ka;
}
asmlinkage int
-sys_sigaltstack(struct pt_regs *regs)
+xtensa_sigaltstack(struct pt_regs *regs)
{
const stack_t *uss = (stack_t *) regs->areg[4];
stack_t *uoss = (stack_t *) regs->areg[3];
* handler, or the user mode value doesn't matter (e.g. PS.OWB).
*/
err |= __get_user(ps, &sc->sc_ps);
- regs->ps = (regs->ps & ~XCHAL_PS_CALLINC_MASK)
- | (ps & XCHAL_PS_CALLINC_MASK);
+ regs->ps = (regs->ps & ~PS_CALLINC_MASK)
+ | (ps & PS_CALLINC_MASK);
/* Additional corruption checks */
static int
save_cpextra (struct _cpstate *buf)
{
-#if (XCHAL_EXTRA_SA_SIZE == 0) && (XCHAL_CP_NUM == 0)
+#if XCHAL_CP_NUM == 0
return 0;
#else
return err;
}
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
+asmlinkage int xtensa_sigreturn(struct pt_regs *regs)
{
struct sigframe *frame = (struct sigframe *)regs->areg[1];
sigset_t set;
return 0;
}
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+asmlinkage int xtensa_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe *frame = (struct rt_sigframe *)regs->areg[1];
sigset_t set;
/* Flush generated code out of the data cache */
- if (err == 0)
- __flush_invalidate_cache_range((unsigned long)codemem, 6UL);
+ if (err == 0) {
+ __invalidate_icache_range((unsigned long)codemem, 6UL);
+ __flush_invalidate_dcache_range((unsigned long)codemem, 6UL);
+ }
return err;
}
--- /dev/null
+/*
+ * arch/xtensa/kernel/syscall.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1995 - 2000 by Ralf Baechle
+ *
+ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
+ * Chris Zankel <chris@zankel.net>
+ * Kevin Chea
+ *
+ */
+#include <asm/uaccess.h>
+#include <asm/syscall.h>
+#include <asm/unistd.h>
+#include <linux/linkage.h>
+#include <linux/stringify.h>
+#include <linux/errno.h>
+#include <linux/syscalls.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/mman.h>
+#include <linux/shm.h>
+
+typedef void (*syscall_t)(void);
+
+syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= {
+ [0 ... __NR_syscall_count - 1] = (syscall_t)&sys_ni_syscall,
+
+#undef __SYSCALL
+#define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol,
+#undef _XTENSA_UNISTD_H
+#undef __KERNEL_SYSCALLS__
+#include <asm/unistd.h>
+};
+
+/*
+ * xtensa_pipe() is the normal C calling standard for creating a pipe. It's not
+ * the way unix traditional does this, though.
+ */
+
+asmlinkage long xtensa_pipe(int __user *userfds)
+{
+ int fd[2];
+ int error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(userfds, fd, 2 * sizeof(int)))
+ error = -EFAULT;
+ }
+ return error;
+}
+
+
+asmlinkage long xtensa_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ int error = -EBADF;
+ struct file * file = NULL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(¤t->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return error;
+}
+
+asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg)
+{
+ unsigned long ret;
+ long err;
+
+ err = do_shmat(shmid, shmaddr, shmflg, &ret);
+ if (err)
+ return err;
+ return (long)ret;
+}
+
+++ /dev/null
-/*
- * arch/xtensa/kernel/syscalls.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- * Copyright (C) 2000 Silicon Graphics, Inc.
- * Copyright (C) 1995 - 2000 by Ralf Baechle
- *
- * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
- * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
- * Chris Zankel <chris@zankel.net>
- * Kevin Chea
- *
- */
-
-#define DEBUG 0
-
-#include <linux/linkage.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/mman.h>
-#include <linux/sched.h>
-#include <linux/file.h>
-#include <linux/slab.h>
-#include <linux/utsname.h>
-#include <linux/unistd.h>
-#include <linux/stringify.h>
-#include <linux/syscalls.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/uaccess.h>
-#include <asm/hardirq.h>
-#include <asm/mman.h>
-#include <asm/shmparam.h>
-#include <asm/page.h>
-
-extern void do_syscall_trace(void);
-typedef int (*syscall_t)(void *a0,...);
-extern syscall_t sys_call_table[];
-extern unsigned char sys_narg_table[];
-
-/*
- * sys_pipe() is the normal C calling standard for creating a pipe. It's not
- * the way unix traditional does this, though.
- */
-
-int sys_pipe(int __user *userfds)
-{
- int fd[2];
- int error;
-
- error = do_pipe(fd);
- if (!error) {
- if (copy_to_user(userfds, fd, 2 * sizeof(int)))
- error = -EFAULT;
- }
- return error;
-}
-
-/*
- * Common code for old and new mmaps.
- */
-long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot,
- unsigned long flags, unsigned long fd, unsigned long pgoff)
-{
- int error = -EBADF;
- struct file * file = NULL;
-
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- if (!(flags & MAP_ANONYMOUS)) {
- file = fget(fd);
- if (!file)
- goto out;
- }
-
- down_write(¤t->mm->mmap_sem);
- error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
- up_write(¤t->mm->mmap_sem);
-
- if (file)
- fput(file);
-out:
- return error;
-}
-
-int sys_clone(struct pt_regs *regs)
-{
- unsigned long clone_flags;
- unsigned long newsp;
- int __user *parent_tidptr, *child_tidptr;
- clone_flags = regs->areg[4];
- newsp = regs->areg[3];
- parent_tidptr = (int __user *)regs->areg[5];
- child_tidptr = (int __user *)regs->areg[6];
- if (!newsp)
- newsp = regs->areg[1];
- return do_fork(clone_flags,newsp,regs,0,parent_tidptr,child_tidptr);
-}
-
-/*
- * sys_execve() executes a new program.
- */
-
-int sys_execve(struct pt_regs *regs)
-{
- int error;
- char * filename;
-
- filename = getname((char *) (long)regs->areg[5]);
- error = PTR_ERR(filename);
- if (IS_ERR(filename))
- goto out;
- error = do_execve(filename, (char **) (long)regs->areg[3],
- (char **) (long)regs->areg[4], regs);
- putname(filename);
-
-out:
- return error;
-}
-
-int sys_uname(struct old_utsname * name)
-{
- if (name && !copy_to_user(name, utsname(), sizeof (*name)))
- return 0;
- return -EFAULT;
-}
-
-/*
- * Build the string table for the builtin "poor man's strace".
- */
-
-#if DEBUG
-#define SYSCALL(fun, narg) #fun,
-static char *sfnames[] = {
-#include "syscalls.h"
-};
-#undef SYS
-#endif
-
-void system_call (struct pt_regs *regs)
-{
- syscall_t syscall;
- unsigned long parm0, parm1, parm2, parm3, parm4, parm5;
- int nargs, res;
- unsigned int syscallnr;
- int ps;
-
-#if DEBUG
- int i;
- unsigned long parms[6];
- char *sysname;
-#endif
-
- regs->syscall = regs->areg[2];
-
- do_syscall_trace();
-
- /* Have to load after syscall_trace because strace
- * sometimes changes regs->syscall.
- */
- syscallnr = regs->syscall;
-
- parm0 = parm1 = parm2 = parm3 = parm4 = parm5 = 0;
-
- /* Restore interrupt level to syscall invoker's.
- * If this were in assembly, we wouldn't disable
- * interrupts in the first place:
- */
- local_save_flags (ps);
- local_irq_restore((ps & ~XCHAL_PS_INTLEVEL_MASK) |
- (regs->ps & XCHAL_PS_INTLEVEL_MASK) );
-
- if (syscallnr > __NR_Linux_syscalls) {
- regs->areg[2] = -ENOSYS;
- return;
- }
-
- syscall = sys_call_table[syscallnr];
- nargs = sys_narg_table[syscallnr];
-
- if (syscall == NULL) {
- regs->areg[2] = -ENOSYS;
- return;
- }
-
- /* There shouldn't be more than six arguments in the table! */
-
- if (nargs > 6)
- panic("Internal error - too many syscall arguments (%d)!\n",
- nargs);
-
- /* Linux takes system-call arguments in registers. The ABI
- * and Xtensa software conventions require the system-call
- * number in a2. If an argument exists in a2, we move it to
- * the next available register. Note that for improved
- * efficiency, we do NOT shift all parameters down one
- * register to maintain the original order.
- *
- * At best case (zero arguments), we just write the syscall
- * number to a2. At worst case (1 to 6 arguments), we move
- * the argument in a2 to the next available register, then
- * write the syscall number to a2.
- *
- * For clarity, the following truth table enumerates all
- * possibilities.
- *
- * arguments syscall number arg0, arg1, arg2, arg3, arg4, arg5
- * --------- -------------- ----------------------------------
- * 0 a2
- * 1 a2 a3
- * 2 a2 a4, a3
- * 3 a2 a5, a3, a4
- * 4 a2 a6, a3, a4, a5
- * 5 a2 a7, a3, a4, a5, a6
- * 6 a2 a8, a3, a4, a5, a6, a7
- */
- if (nargs) {
- parm0 = regs->areg[nargs+2];
- parm1 = regs->areg[3];
- parm2 = regs->areg[4];
- parm3 = regs->areg[5];
- parm4 = regs->areg[6];
- parm5 = regs->areg[7];
- } else /* nargs == 0 */
- parm0 = (unsigned long) regs;
-
-#if DEBUG
- parms[0] = parm0;
- parms[1] = parm1;
- parms[2] = parm2;
- parms[3] = parm3;
- parms[4] = parm4;
- parms[5] = parm5;
-
- sysname = sfnames[syscallnr];
- if (strncmp(sysname, "sys_", 4) == 0)
- sysname = sysname + 4;
-
- printk("\017SYSCALL:I:%x:%d:%s %s(", regs->pc, current->pid,
- current->comm, sysname);
- for (i = 0; i < nargs; i++)
- printk((i>0) ? ", %#lx" : "%#lx", parms[i]);
- printk(")\n");
-#endif
-
- res = syscall((void *)parm0, parm1, parm2, parm3, parm4, parm5);
-
-#if DEBUG
- printk("\017SYSCALL:O:%d:%s %s(",current->pid, current->comm, sysname);
- for (i = 0; i < nargs; i++)
- printk((i>0) ? ", %#lx" : "%#lx", parms[i]);
- if (res < 4096)
- printk(") = %d\n", res);
- else
- printk(") = %#x\n", res);
-#endif /* DEBUG */
-
- regs->areg[2] = res;
- do_syscall_trace();
-}
-
-/*
- * Do a system call from kernel instead of calling sys_execve so we
- * end up with proper pt_regs.
- */
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
-{
- long __res;
- asm volatile (
- " mov a5, %2 \n"
- " mov a4, %4 \n"
- " mov a3, %3 \n"
- " movi a2, %1 \n"
- " syscall \n"
- " mov %0, a2 \n"
- : "=a" (__res)
- : "i" (__NR_execve), "a" (filename), "a" (argv), "a" (envp)
- : "a2", "a3", "a4", "a5");
- return __res;
-}
+++ /dev/null
-/*
- * arch/xtensa/kernel/syscalls.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- *
- * Changes by Joe Taylor <joe@tensilica.com>
- */
-
-/*
- * This file is being included twice - once to build a list of all
- * syscalls and once to build a table of how many arguments each syscall
- * accepts. Syscalls that receive a pointer to the saved registers are
- * marked as having zero arguments.
- *
- * The binary compatibility calls are in a separate list.
- *
- * Entry '0' used to be system_call. It's removed to disable indirect
- * system calls for now so user tasks can't recurse. See mips'
- * sys_syscall for a comparable example.
- */
-
-SYSCALL(0, 0) /* 00 */
-SYSCALL(sys_exit, 1)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_read, 3)
-SYSCALL(sys_write, 3)
-SYSCALL(sys_open, 3) /* 05 */
-SYSCALL(sys_close, 1)
-SYSCALL(sys_ni_syscall, 3)
-SYSCALL(sys_creat, 2)
-SYSCALL(sys_link, 2)
-SYSCALL(sys_unlink, 1) /* 10 */
-SYSCALL(sys_execve, 0)
-SYSCALL(sys_chdir, 1)
-SYSCALL(sys_ni_syscall, 1)
-SYSCALL(sys_mknod, 3)
-SYSCALL(sys_chmod, 2) /* 15 */
-SYSCALL(sys_lchown, 3)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_newstat, 2)
-SYSCALL(sys_lseek, 3)
-SYSCALL(sys_getpid, 0) /* 20 */
-SYSCALL(sys_mount, 5)
-SYSCALL(sys_ni_syscall, 1)
-SYSCALL(sys_setuid, 1)
-SYSCALL(sys_getuid, 0)
-SYSCALL(sys_ni_syscall, 1) /* 25 */
-SYSCALL(sys_ptrace, 4)
-SYSCALL(sys_ni_syscall, 1)
-SYSCALL(sys_newfstat, 2)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_utime, 2) /* 30 */
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_access, 2)
-SYSCALL(sys_ni_syscall, 1)
-SYSCALL(sys_ni_syscall, 0) /* 35 */
-SYSCALL(sys_sync, 0)
-SYSCALL(sys_kill, 2)
-SYSCALL(sys_rename, 2)
-SYSCALL(sys_mkdir, 2)
-SYSCALL(sys_rmdir, 1) /* 40 */
-SYSCALL(sys_dup, 1)
-SYSCALL(sys_pipe, 1)
-SYSCALL(sys_times, 1)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_brk, 1) /* 45 */
-SYSCALL(sys_setgid, 1)
-SYSCALL(sys_getgid, 0)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_geteuid, 0)
-SYSCALL(sys_getegid, 0) /* 50 */
-SYSCALL(sys_acct, 1)
-SYSCALL(sys_umount, 2)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_ioctl, 3)
-SYSCALL(sys_fcntl, 3) /* 55 */
-SYSCALL(sys_ni_syscall, 2)
-SYSCALL(sys_setpgid, 2)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_umask, 1) /* 60 */
-SYSCALL(sys_chroot, 1)
-SYSCALL(sys_ustat, 2)
-SYSCALL(sys_dup2, 2)
-SYSCALL(sys_getppid, 0)
-SYSCALL(sys_ni_syscall, 0) /* 65 */
-SYSCALL(sys_setsid, 0)
-SYSCALL(sys_sigaction, 3)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_ni_syscall, 1)
-SYSCALL(sys_setreuid, 2) /* 70 */
-SYSCALL(sys_setregid, 2)
-SYSCALL(sys_sigsuspend, 0)
-SYSCALL(sys_ni_syscall, 1)
-SYSCALL(sys_sethostname, 2)
-SYSCALL(sys_setrlimit, 2) /* 75 */
-SYSCALL(sys_getrlimit, 2)
-SYSCALL(sys_getrusage, 2)
-SYSCALL(sys_gettimeofday, 2)
-SYSCALL(sys_settimeofday, 2)
-SYSCALL(sys_getgroups, 2) /* 80 */
-SYSCALL(sys_setgroups, 2)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_symlink, 2)
-SYSCALL(sys_newlstat, 2)
-SYSCALL(sys_readlink, 3) /* 85 */
-SYSCALL(sys_uselib, 1)
-SYSCALL(sys_swapon, 2)
-SYSCALL(sys_reboot, 3)
-SYSCALL(sys_ni_syscall, 3)
-SYSCALL(sys_ni_syscall, 6) /* 90 */
-SYSCALL(sys_munmap, 2)
-SYSCALL(sys_truncate, 2)
-SYSCALL(sys_ftruncate, 2)
-SYSCALL(sys_fchmod, 2)
-SYSCALL(sys_fchown, 3) /* 95 */
-SYSCALL(sys_getpriority, 2)
-SYSCALL(sys_setpriority, 3)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_statfs, 2)
-SYSCALL(sys_fstatfs, 2) /* 100 */
-SYSCALL(sys_ni_syscall, 3)
-SYSCALL(sys_ni_syscall, 2)
-SYSCALL(sys_syslog, 3)
-SYSCALL(sys_setitimer, 3)
-SYSCALL(sys_getitimer, 2) /* 105 */
-SYSCALL(sys_newstat, 2)
-SYSCALL(sys_newlstat, 2)
-SYSCALL(sys_newfstat, 2)
-SYSCALL(sys_uname, 1)
-SYSCALL(sys_ni_syscall, 0) /* 110 */
-SYSCALL(sys_vhangup, 0)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_wait4, 4)
-SYSCALL(sys_swapoff, 1) /* 115 */
-SYSCALL(sys_sysinfo, 1)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_fsync, 1)
-SYSCALL(sys_sigreturn, 0)
-SYSCALL(sys_clone, 0) /* 120 */
-SYSCALL(sys_setdomainname, 2)
-SYSCALL(sys_newuname, 1)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_adjtimex, 1)
-SYSCALL(sys_mprotect, 3) /* 125 */
-SYSCALL(sys_ni_syscall, 3)
-SYSCALL(sys_ni_syscall, 2)
-SYSCALL(sys_init_module, 2)
-SYSCALL(sys_delete_module, 1)
-SYSCALL(sys_ni_syscall, 1) /* 130 */
-SYSCALL(sys_quotactl, 0)
-SYSCALL(sys_getpgid, 1)
-SYSCALL(sys_fchdir, 1)
-SYSCALL(sys_bdflush, 2)
-SYSCALL(sys_sysfs, 3) /* 135 */
-SYSCALL(sys_personality, 1)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_setfsuid, 1)
-SYSCALL(sys_setfsgid, 1)
-SYSCALL(sys_llseek, 5) /* 140 */
-SYSCALL(sys_getdents, 3)
-SYSCALL(sys_select, 5)
-SYSCALL(sys_flock, 2)
-SYSCALL(sys_msync, 3)
-SYSCALL(sys_readv, 3) /* 145 */
-SYSCALL(sys_writev, 3)
-SYSCALL(sys_ni_syscall, 3)
-SYSCALL(sys_ni_syscall, 3)
-SYSCALL(sys_ni_syscall, 4) /* handled in fast syscall handler. */
-SYSCALL(sys_ni_syscall, 0) /* 150 */
-SYSCALL(sys_getsid, 1)
-SYSCALL(sys_fdatasync, 1)
-SYSCALL(sys_sysctl, 1)
-SYSCALL(sys_mlock, 2)
-SYSCALL(sys_munlock, 2) /* 155 */
-SYSCALL(sys_mlockall, 1)
-SYSCALL(sys_munlockall, 0)
-SYSCALL(sys_sched_setparam,2)
-SYSCALL(sys_sched_getparam,2)
-SYSCALL(sys_sched_setscheduler,3) /* 160 */
-SYSCALL(sys_sched_getscheduler,1)
-SYSCALL(sys_sched_yield,0)
-SYSCALL(sys_sched_get_priority_max,1)
-SYSCALL(sys_sched_get_priority_min,1)
-SYSCALL(sys_sched_rr_get_interval,2) /* 165 */
-SYSCALL(sys_nanosleep,2)
-SYSCALL(sys_mremap,4)
-SYSCALL(sys_accept, 3)
-SYSCALL(sys_bind, 3)
-SYSCALL(sys_connect, 3) /* 170 */
-SYSCALL(sys_getpeername, 3)
-SYSCALL(sys_getsockname, 3)
-SYSCALL(sys_getsockopt, 5)
-SYSCALL(sys_listen, 2)
-SYSCALL(sys_recv, 4) /* 175 */
-SYSCALL(sys_recvfrom, 6)
-SYSCALL(sys_recvmsg, 3)
-SYSCALL(sys_send, 4)
-SYSCALL(sys_sendmsg, 3)
-SYSCALL(sys_sendto, 6) /* 180 */
-SYSCALL(sys_setsockopt, 5)
-SYSCALL(sys_shutdown, 2)
-SYSCALL(sys_socket, 3)
-SYSCALL(sys_socketpair, 4)
-SYSCALL(sys_setresuid, 3) /* 185 */
-SYSCALL(sys_getresuid, 3)
-SYSCALL(sys_ni_syscall, 5)
-SYSCALL(sys_poll, 3)
-SYSCALL(sys_nfsservctl, 3)
-SYSCALL(sys_setresgid, 3) /* 190 */
-SYSCALL(sys_getresgid, 3)
-SYSCALL(sys_prctl, 5)
-SYSCALL(sys_rt_sigreturn, 0)
-SYSCALL(sys_rt_sigaction, 4)
-SYSCALL(sys_rt_sigprocmask, 4) /* 195 */
-SYSCALL(sys_rt_sigpending, 2)
-SYSCALL(sys_rt_sigtimedwait, 4)
-SYSCALL(sys_rt_sigqueueinfo, 3)
-SYSCALL(sys_rt_sigsuspend, 0)
-SYSCALL(sys_pread64, 5) /* 200 */
-SYSCALL(sys_pwrite64, 5)
-SYSCALL(sys_chown, 3)
-SYSCALL(sys_getcwd, 2)
-SYSCALL(sys_capget, 2)
-SYSCALL(sys_capset, 2) /* 205 */
-SYSCALL(sys_sigaltstack, 0)
-SYSCALL(sys_sendfile, 4)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_ni_syscall, 0)
-SYSCALL(sys_mmap, 6) /* 210 */
-SYSCALL(sys_truncate64, 2)
-SYSCALL(sys_ftruncate64, 2)
-SYSCALL(sys_stat64, 2)
-SYSCALL(sys_lstat64, 2)
-SYSCALL(sys_fstat64, 2) /* 215 */
-SYSCALL(sys_pivot_root, 2)
-SYSCALL(sys_mincore, 3)
-SYSCALL(sys_madvise, 3)
-SYSCALL(sys_getdents64, 3)
-SYSCALL(sys_ni_syscall, 0) /* 220 */
return (unsigned long long)jiffies * (1000000000 / HZ);
}
-static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t timer_interrupt(int irq, void *dev_id);
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED,
* The timer interrupt is called HZ times per second.
*/
-irqreturn_t timer_interrupt (int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t timer_interrupt (int irq, void *dev_id)
{
unsigned long next;
again:
while ((signed long)(get_ccount() - next) > 0) {
- profile_tick(CPU_PROFILING, regs);
+ profile_tick(CPU_PROFILING);
#ifndef CONFIG_SMP
- update_process_times(user_mode(regs));
+ update_process_times(user_mode(get_irq_regs()));
#endif
write_seqlock(&xtime_lock);
#define USER 0x02
#define COPROCESSOR(x) \
-{ XCHAL_EXCCAUSE_COPROCESSOR ## x ## _DISABLED, USER, fast_coprocessor }
+{ EXCCAUSE_COPROCESSOR ## x ## _DISABLED, USER, fast_coprocessor }
typedef struct {
int cause;
dispatch_init_table_t __init dispatch_init_table[] = {
-{ XCHAL_EXCCAUSE_ILLEGAL_INSTRUCTION, 0, do_illegal_instruction},
-{ XCHAL_EXCCAUSE_SYSTEM_CALL, KRNL, fast_syscall_kernel },
-{ XCHAL_EXCCAUSE_SYSTEM_CALL, USER, fast_syscall_user },
-{ XCHAL_EXCCAUSE_SYSTEM_CALL, 0, system_call },
-/* XCHAL_EXCCAUSE_INSTRUCTION_FETCH unhandled */
-/* XCHAL_EXCCAUSE_LOAD_STORE_ERROR unhandled*/
-{ XCHAL_EXCCAUSE_LEVEL1_INTERRUPT, 0, do_interrupt },
-{ XCHAL_EXCCAUSE_ALLOCA, USER|KRNL, fast_alloca },
-/* XCHAL_EXCCAUSE_INTEGER_DIVIDE_BY_ZERO unhandled */
-/* XCHAL_EXCCAUSE_PRIVILEGED unhandled */
+{ EXCCAUSE_ILLEGAL_INSTRUCTION, 0, do_illegal_instruction},
+{ EXCCAUSE_SYSTEM_CALL, KRNL, fast_syscall_kernel },
+{ EXCCAUSE_SYSTEM_CALL, USER, fast_syscall_user },
+{ EXCCAUSE_SYSTEM_CALL, 0, system_call },
+/* EXCCAUSE_INSTRUCTION_FETCH unhandled */
+/* EXCCAUSE_LOAD_STORE_ERROR unhandled*/
+{ EXCCAUSE_LEVEL1_INTERRUPT, 0, do_interrupt },
+{ EXCCAUSE_ALLOCA, USER|KRNL, fast_alloca },
+/* EXCCAUSE_INTEGER_DIVIDE_BY_ZERO unhandled */
+/* EXCCAUSE_PRIVILEGED unhandled */
#if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION
#ifdef CONFIG_UNALIGNED_USER
-{ XCHAL_EXCCAUSE_UNALIGNED, USER, fast_unaligned },
+{ EXCCAUSE_UNALIGNED, USER, fast_unaligned },
#else
-{ XCHAL_EXCCAUSE_UNALIGNED, 0, do_unaligned_user },
+{ EXCCAUSE_UNALIGNED, 0, do_unaligned_user },
#endif
-{ XCHAL_EXCCAUSE_UNALIGNED, KRNL, fast_unaligned },
+{ EXCCAUSE_UNALIGNED, KRNL, fast_unaligned },
#endif
-{ XCHAL_EXCCAUSE_ITLB_MISS, 0, do_page_fault },
-{ XCHAL_EXCCAUSE_ITLB_MISS, USER|KRNL, fast_second_level_miss},
-{ XCHAL_EXCCAUSE_ITLB_MULTIHIT, 0, do_multihit },
-{ XCHAL_EXCCAUSE_ITLB_PRIVILEGE, 0, do_page_fault },
-/* XCHAL_EXCCAUSE_SIZE_RESTRICTION unhandled */
-{ XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE, 0, do_page_fault },
-{ XCHAL_EXCCAUSE_DTLB_MISS, USER|KRNL, fast_second_level_miss},
-{ XCHAL_EXCCAUSE_DTLB_MISS, 0, do_page_fault },
-{ XCHAL_EXCCAUSE_DTLB_MULTIHIT, 0, do_multihit },
-{ XCHAL_EXCCAUSE_DTLB_PRIVILEGE, 0, do_page_fault },
-/* XCHAL_EXCCAUSE_DTLB_SIZE_RESTRICTION unhandled */
-{ XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE, USER|KRNL, fast_store_prohibited },
-{ XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE, 0, do_page_fault },
-{ XCHAL_EXCCAUSE_LOAD_CACHE_ATTRIBUTE, 0, do_page_fault },
+{ EXCCAUSE_ITLB_MISS, 0, do_page_fault },
+{ EXCCAUSE_ITLB_MISS, USER|KRNL, fast_second_level_miss},
+{ EXCCAUSE_ITLB_MULTIHIT, 0, do_multihit },
+{ EXCCAUSE_ITLB_PRIVILEGE, 0, do_page_fault },
+/* EXCCAUSE_SIZE_RESTRICTION unhandled */
+{ EXCCAUSE_FETCH_CACHE_ATTRIBUTE, 0, do_page_fault },
+{ EXCCAUSE_DTLB_MISS, USER|KRNL, fast_second_level_miss},
+{ EXCCAUSE_DTLB_MISS, 0, do_page_fault },
+{ EXCCAUSE_DTLB_MULTIHIT, 0, do_multihit },
+{ EXCCAUSE_DTLB_PRIVILEGE, 0, do_page_fault },
+/* EXCCAUSE_DTLB_SIZE_RESTRICTION unhandled */
+{ EXCCAUSE_STORE_CACHE_ATTRIBUTE, USER|KRNL, fast_store_prohibited },
+{ EXCCAUSE_STORE_CACHE_ATTRIBUTE, 0, do_page_fault },
+{ EXCCAUSE_LOAD_CACHE_ATTRIBUTE, 0, do_page_fault },
/* XCCHAL_EXCCAUSE_FLOATING_POINT unhandled */
#if (XCHAL_CP_MASK & 1)
COPROCESSOR(0),
#include <asm/thread_info.h>
#include <asm/processor.h>
+#define WINDOW_VECTORS_SIZE 0x180
+
/*
* User exception vector. (Exceptions with PS.UM == 1, PS.EXCM == 0)
/* Check for kernel double exception (usually fatal). */
rsr a3, PS
- _bbci.l a3, PS_UM_SHIFT, .Lksp
+ _bbci.l a3, PS_UM_BIT, .Lksp
/* Check if we are currently handling a window exception. */
/* Note: We don't need to indicate that we enter a critical section. */
movi a3, XCHAL_WINDOW_VECTORS_VADDR
_bltu a0, a3, .Lfixup
- addi a3, a3, XSHAL_WINDOW_VECTORS_SIZE
+ addi a3, a3, WINDOW_VECTORS_SIZE
_bgeu a0, a3, .Lfixup
/* Window overflow/underflow exception. Get stack pointer. */
wsr a2, DEPC # save stack pointer temporarily
rsr a0, PS
- extui a0, a0, XCHAL_PS_OWB_SHIFT, XCHAL_PS_OWB_BITS
+ extui a0, a0, PS_OWB_SHIFT, 4
wsr a0, WINDOWBASE
rsync
.Lksp: /* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */
rsr a3, EXCCAUSE
- beqi a3, XCHAL_EXCCAUSE_ITLB_MISS, 1f
- addi a3, a3, -XCHAL_EXCCAUSE_DTLB_MISS
+ beqi a3, EXCCAUSE_ITLB_MISS, 1f
+ addi a3, a3, -EXCCAUSE_DTLB_MISS
bnez a3, .Lunrecoverable
1: movi a3, fast_second_level_miss_double_kernel
jx a3
#include <asm-generic/vmlinux.lds.h>
-#define _NOCLANGUAGE
-#include <xtensa/config/core.h>
-#include <xtensa/config/system.h>
+#include <asm/variant/core.h>
OUTPUT_ARCH(xtensa)
ENTRY(_start)
-#if XCHAL_MEMORY_ORDER == XTHAL_BIGENDIAN
+#ifdef __XTENSA_EB__
jiffies = jiffies_64 + 4;
#else
jiffies = jiffies_64;
#endif
-#define KERNELOFFSET 0x1000
+#define KERNELOFFSET 0xd0001000
/* Note: In the following macros, it would be nice to specify only the
vector name and section kind and construct "sym" and "section" using
SECTIONS
{
- . = XCHAL_KSEG_CACHED_VADDR + KERNELOFFSET;
+ . = KERNELOFFSET;
/* .text section */
_text = .;
/* Initialization code and data: */
- . = ALIGN(1<<XCHAL_MMU_MIN_PTE_PAGE_SIZE);
+ . = ALIGN(1 << 12);
__init_begin = .;
.init.text : {
_sinittext = .;
.dummy)
SECTION_VECTOR (_DebugInterruptVector_literal,
.DebugInterruptVector.literal,
- XCHAL_INTLEVEL_VECTOR_VADDR(XCHAL_DEBUGLEVEL) - 4,
+ XCHAL_DEBUG_VECTOR_VADDR - 4,
SIZEOF(.WindowVectors.text),
.WindowVectors.text)
SECTION_VECTOR (_DebugInterruptVector_text,
.DebugInterruptVector.text,
- XCHAL_INTLEVEL_VECTOR_VADDR(XCHAL_DEBUGLEVEL),
+ XCHAL_DEBUG_VECTOR_VADDR,
4,
.DebugInterruptVector.literal)
SECTION_VECTOR (_KernelExceptionVector_literal,
.KernelExceptionVector.literal,
- XCHAL_KERNELEXC_VECTOR_VADDR - 4,
+ XCHAL_KERNEL_VECTOR_VADDR - 4,
SIZEOF(.DebugInterruptVector.text),
.DebugInterruptVector.text)
SECTION_VECTOR (_KernelExceptionVector_text,
.KernelExceptionVector.text,
- XCHAL_KERNELEXC_VECTOR_VADDR,
+ XCHAL_KERNEL_VECTOR_VADDR,
4,
.KernelExceptionVector.literal)
SECTION_VECTOR (_UserExceptionVector_literal,
.UserExceptionVector.literal,
- XCHAL_USEREXC_VECTOR_VADDR - 4,
+ XCHAL_USER_VECTOR_VADDR - 4,
SIZEOF(.KernelExceptionVector.text),
.KernelExceptionVector.text)
SECTION_VECTOR (_UserExceptionVector_text,
.UserExceptionVector.text,
- XCHAL_USEREXC_VECTOR_VADDR,
+ XCHAL_USER_VECTOR_VADDR,
4,
.UserExceptionVector.literal)
SECTION_VECTOR (_DoubleExceptionVector_literal,
.DoubleExceptionVector.literal)
. = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
- . = ALIGN(1<<XCHAL_MMU_MIN_PTE_PAGE_SIZE);
+ . = ALIGN(1 << 12);
__init_end = .;
#include <asm/errno.h>
#include <linux/linkage.h>
-#define _ASMLANGUAGE
-#include <xtensa/config/core.h>
+#include <asm/variant/core.h>
/*
* computes a partial checksum, e.g. for TCP/UDP fragments
* Copyright (C) 2002 - 2005 Tensilica Inc.
*/
-#include <xtensa/coreasm.h>
+#include <asm/variant/core.h>
.macro src_b r, w0, w1
#ifdef __XTENSA_EB__
* Copyright (C) 2002 Tensilica Inc.
*/
-#include <xtensa/coreasm.h>
+#include <asm/variant/core.h>
/*
* void *memset(void *dst, int c, size_t length)
* Copyright (C) 2002 Tensilica Inc.
*/
-#include <xtensa/coreasm.h>
+#include <asm/variant/core.h>
#include <linux/errno.h>
/* Load or store instructions that may cause exceptions use the EX macro. */
* Copyright (C) 2002 Tensilica Inc.
*/
-#include <xtensa/coreasm.h>
+#include <asm/variant/core.h>
/* Load or store instructions that may cause exceptions use the EX macro. */
* a11/ original length
*/
-#include <xtensa/coreasm.h>
+#include <asm/variant/core.h>
#ifdef __XTENSA_EB__
#define ALIGN(R, W0, W1) src R, W0, W1
#include <asm/system.h>
#include <asm/pgalloc.h>
-unsigned long asid_cache = ASID_FIRST_VERSION;
+unsigned long asid_cache = ASID_USER_FIRST;
void bad_page_fault(struct pt_regs*, unsigned long, int);
/*
return;
}
- is_write = (exccause == XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE) ? 1 : 0;
- is_exec = (exccause == XCHAL_EXCCAUSE_ITLB_PRIVILEGE ||
- exccause == XCHAL_EXCCAUSE_ITLB_MISS ||
- exccause == XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE) ? 1 : 0;
+ is_write = (exccause == EXCCAUSE_STORE_CACHE_ATTRIBUTE) ? 1 : 0;
+ is_exec = (exccause == EXCCAUSE_ITLB_PRIVILEGE ||
+ exccause == EXCCAUSE_ITLB_MISS ||
+ exccause == EXCCAUSE_FETCH_CACHE_ATTRIBUTE) ? 1 : 0;
#if 0
printk("[%s:%d:%08x:%d:%08x:%s%s]\n", current->comm, current->pid,
if (min_low_pfn > max_pfn)
panic("No memory found!\n");
- max_low_pfn = max_pfn < MAX_LOW_MEMORY >> PAGE_SHIFT ?
- max_pfn : MAX_LOW_MEMORY >> PAGE_SHIFT;
+ max_low_pfn = max_pfn < MAX_MEM_PFN >> PAGE_SHIFT ?
+ max_pfn : MAX_MEM_PFN >> PAGE_SHIFT;
/* Find an area to use for the bootmem bitmap. */
/* Set rasid register to a known value. */
- set_rasid_register (ASID_ALL_RESERVED);
+ set_rasid_register (ASID_USER_FIRST);
/* Set PTEVADDR special register to the start of the page
* table, which is in kernel mappable space (ie. not
#include <linux/linkage.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-
-#include <xtensa/cacheasm.h>
-#include <xtensa/cacheattrasm.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheasm.h>
/* clear_page (page) */
retw
-
/*
- * void __flush_invalidate_cache_all(void)
+ * void __invalidate_icache_page(ulong start)
*/
-ENTRY(__flush_invalidate_cache_all)
+ENTRY(__invalidate_icache_page)
entry sp, 16
- dcache_writeback_inv_all a2, a3
- icache_invalidate_all a2, a3
- retw
-/*
- * void __invalidate_icache_all(void)
- */
+ ___invalidate_icache_page a2 a3
+ isync
-ENTRY(__invalidate_icache_all)
- entry sp, 16
- icache_invalidate_all a2, a3
retw
/*
- * void __flush_invalidate_dcache_all(void)
+ * void __invalidate_dcache_page(ulong start)
*/
-ENTRY(__flush_invalidate_dcache_all)
+ENTRY(__invalidate_dcache_page)
entry sp, 16
- dcache_writeback_inv_all a2, a3
- retw
-
-/*
- * void __flush_invalidate_cache_range(ulong start, ulong size)
- */
+ ___invalidate_dcache_page a2 a3
+ dsync
-ENTRY(__flush_invalidate_cache_range)
- entry sp, 16
- mov a4, a2
- mov a5, a3
- dcache_writeback_inv_region a4, a5, a6
- icache_invalidate_region a2, a3, a4
retw
/*
- * void __invalidate_icache_page(ulong start)
+ * void __flush_invalidate_dcache_page(ulong start)
*/
-ENTRY(__invalidate_icache_page)
+ENTRY(__flush_invalidate_dcache_page)
entry sp, 16
- movi a3, PAGE_SIZE
- icache_invalidate_region a2, a3, a4
- retw
-/*
- * void __invalidate_dcache_page(ulong start)
- */
+ ___flush_invalidate_dcache_page a2 a3
-ENTRY(__invalidate_dcache_page)
- entry sp, 16
- movi a3, PAGE_SIZE
- dcache_invalidate_region a2, a3, a4
+ dsync
retw
/*
- * void __invalidate_icache_range(ulong start, ulong size)
+ * void __flush_dcache_page(ulong start)
*/
-ENTRY(__invalidate_icache_range)
+ENTRY(__flush_dcache_page)
entry sp, 16
- icache_invalidate_region a2, a3, a4
- retw
-/*
- * void __invalidate_dcache_range(ulong start, ulong size)
- */
+ ___flush_dcache_page a2 a3
-ENTRY(__invalidate_dcache_range)
- entry sp, 16
- dcache_invalidate_region a2, a3, a4
+ dsync
retw
-/*
- * void __flush_dcache_page(ulong start)
- */
-ENTRY(__flush_dcache_page)
- entry sp, 16
- movi a3, PAGE_SIZE
- dcache_writeback_region a2, a3, a4
- retw
/*
- * void __flush_invalidate_dcache_page(ulong start)
+ * void __invalidate_icache_range(ulong start, ulong size)
*/
-ENTRY(__flush_invalidate_dcache_page)
+ENTRY(__invalidate_icache_range)
entry sp, 16
- movi a3, PAGE_SIZE
- dcache_writeback_inv_region a2, a3, a4
+
+ ___invalidate_icache_range a2 a3 a4
+ isync
+
retw
/*
ENTRY(__flush_invalidate_dcache_range)
entry sp, 16
- dcache_writeback_inv_region a2, a3, a4
- retw
-/*
- * void __invalidate_dcache_all(void)
- */
+ ___flush_invalidate_dcache_range a2 a3 a4
+ dsync
-ENTRY(__invalidate_dcache_all)
- entry sp, 16
- dcache_invalidate_all a2, a3
retw
/*
- * void __flush_invalidate_dcache_page_phys(ulong start)
+ * void _flush_dcache_range(ulong start, ulong size)
*/
-ENTRY(__flush_invalidate_dcache_page_phys)
+ENTRY(__flush_dcache_range)
entry sp, 16
- movi a3, XCHAL_DCACHE_SIZE
- movi a4, PAGE_MASK | 1
- addi a2, a2, 1
-
-1: addi a3, a3, -XCHAL_DCACHE_LINESIZE
-
- ldct a6, a3
+ ___flush_dcache_range a2 a3 a4
dsync
- and a6, a6, a4
- beq a6, a2, 2f
- bgeui a3, 2, 1b
- retw
-2: diwbi a3, 0
- bgeui a3, 2, 1b
retw
-ENTRY(check_dcache_low0)
- entry sp, 16
-
- movi a3, XCHAL_DCACHE_SIZE / 4
- movi a4, PAGE_MASK | 1
- addi a2, a2, 1
-
-1: addi a3, a3, -XCHAL_DCACHE_LINESIZE
-
- ldct a6, a3
- dsync
- and a6, a6, a4
- beq a6, a2, 2f
- bgeui a3, 2, 1b
- retw
-
-2: j 2b
-
-ENTRY(check_dcache_high0)
- entry sp, 16
-
- movi a5, XCHAL_DCACHE_SIZE / 4
- movi a3, XCHAL_DCACHE_SIZE / 2
- movi a4, PAGE_MASK | 1
- addi a2, a2, 1
-
-1: addi a3, a3, -XCHAL_DCACHE_LINESIZE
- addi a5, a5, -XCHAL_DCACHE_LINESIZE
-
- ldct a6, a3
- dsync
- and a6, a6, a4
- beq a6, a2, 2f
- bgeui a5, 2, 1b
- retw
-
-2: j 2b
+/*
+ * void _invalidate_dcache_range(ulong start, ulong size)
+ */
-ENTRY(check_dcache_low1)
+ENTRY(__invalidate_dcache_range)
entry sp, 16
- movi a5, XCHAL_DCACHE_SIZE / 4
- movi a3, XCHAL_DCACHE_SIZE * 3 / 4
- movi a4, PAGE_MASK | 1
- addi a2, a2, 1
+ ___invalidate_dcache_range a2 a3 a4
-1: addi a3, a3, -XCHAL_DCACHE_LINESIZE
- addi a5, a5, -XCHAL_DCACHE_LINESIZE
- ldct a6, a3
- dsync
- and a6, a6, a4
- beq a6, a2, 2f
- bgeui a5, 2, 1b
retw
-2: j 2b
+/*
+ * void _invalidate_icache_all(void)
+ */
-ENTRY(check_dcache_high1)
+ENTRY(__invalidate_icache_all)
entry sp, 16
- movi a5, XCHAL_DCACHE_SIZE / 4
- movi a3, XCHAL_DCACHE_SIZE
- movi a4, PAGE_MASK | 1
- addi a2, a2, 1
-
-1: addi a3, a3, -XCHAL_DCACHE_LINESIZE
- addi a5, a5, -XCHAL_DCACHE_LINESIZE
+ ___invalidate_icache_all a2 a3
+ isync
- ldct a6, a3
- dsync
- and a6, a6, a4
- beq a6, a2, 2f
- bgeui a5, 2, 1b
retw
-2: j 2b
-
-
/*
- * void __invalidate_icache_page_phys(ulong start)
+ * void _flush_invalidate_dcache_all(void)
*/
-ENTRY(__invalidate_icache_page_phys)
+ENTRY(__flush_invalidate_dcache_all)
entry sp, 16
- movi a3, XCHAL_ICACHE_SIZE
- movi a4, PAGE_MASK | 1
- addi a2, a2, 1
-
-1: addi a3, a3, -XCHAL_ICACHE_LINESIZE
-
- lict a6, a3
- isync
- and a6, a6, a4
- beq a6, a2, 2f
- bgeui a3, 2, 1b
- retw
+ ___flush_invalidate_dcache_all a2 a3
+ dsync
-2: iii a3, 0
- bgeui a3, 2, 1b
retw
+/*
+ * void _invalidate_dcache_all(void)
+ */
-#if 0
-
- movi a3, XCHAL_DCACHE_WAYS - 1
- movi a4, PAGE_SIZE
-
-1: mov a5, a2
- add a6, a2, a4
-
-2: diwbi a5, 0
- diwbi a5, XCHAL_DCACHE_LINESIZE
- diwbi a5, XCHAL_DCACHE_LINESIZE * 2
- diwbi a5, XCHAL_DCACHE_LINESIZE * 3
-
- addi a5, a5, XCHAL_DCACHE_LINESIZE * 4
- blt a5, a6, 2b
-
- addi a3, a3, -1
- addi a2, a2, XCHAL_DCACHE_SIZE / XCHAL_DCACHE_WAYS
- bgez a3, 1b
-
- retw
-
-ENTRY(__invalidate_icache_page_index)
+ENTRY(__invalidate_dcache_all)
entry sp, 16
- movi a3, XCHAL_ICACHE_WAYS - 1
- movi a4, PAGE_SIZE
-
-1: mov a5, a2
- add a6, a2, a4
-
-2: iii a5, 0
- iii a5, XCHAL_ICACHE_LINESIZE
- iii a5, XCHAL_ICACHE_LINESIZE * 2
- iii a5, XCHAL_ICACHE_LINESIZE * 3
-
- addi a5, a5, XCHAL_ICACHE_LINESIZE * 4
- blt a5, a6, 2b
-
- addi a3, a3, -1
- addi a2, a2, XCHAL_ICACHE_SIZE / XCHAL_ICACHE_WAYS
- bgez a3, 2b
+ ___invalidate_dcache_all a2 a3
+ dsync
retw
-#endif
-
-
-
-
-
-
static inline void __flush_itlb_all (void)
{
- int way, index;
+ int w, i;
- for (way = 0; way < XCHAL_ITLB_ARF_WAYS; way++) {
- for (index = 0; index < ITLB_ENTRIES_PER_ARF_WAY; index++) {
- int entry = way + (index << PAGE_SHIFT);
- invalidate_itlb_entry_no_isync (entry);
+ for (w = 0; w < ITLB_ARF_WAYS; w++) {
+ for (i = 0; i < (1 << XCHAL_ITLB_ARF_ENTRIES_LOG2); i++) {
+ int e = w + (i << PAGE_SHIFT);
+ invalidate_itlb_entry_no_isync(e);
}
}
asm volatile ("isync\n");
static inline void __flush_dtlb_all (void)
{
- int way, index;
+ int w, i;
- for (way = 0; way < XCHAL_DTLB_ARF_WAYS; way++) {
- for (index = 0; index < DTLB_ENTRIES_PER_ARF_WAY; index++) {
- int entry = way + (index << PAGE_SHIFT);
- invalidate_dtlb_entry_no_isync (entry);
+ for (w = 0; w < DTLB_ARF_WAYS; w++) {
+ for (i = 0; i < (1 << XCHAL_DTLB_ARF_ENTRIES_LOG2); i++) {
+ int e = w + (i << PAGE_SHIFT);
+ invalidate_dtlb_entry_no_isync(e);
}
}
asm volatile ("isync\n");
void flush_tlb_mm(struct mm_struct *mm)
{
-#if 0
- printk("[tlbmm<%lx>]\n", (unsigned long)mm->context);
-#endif
-
if (mm == current->active_mm) {
int flags;
local_save_flags(flags);
- get_new_mmu_context(mm, asid_cache);
- set_rasid_register(ASID_INSERT(mm->context));
+ __get_new_mmu_context(mm);
+ __load_mmu_context(mm);
local_irq_restore(flags);
}
else
mm->context = 0;
}
+#define _ITLB_ENTRIES (ITLB_ARF_WAYS << XCHAL_ITLB_ARF_ENTRIES_LOG2)
+#define _DTLB_ENTRIES (DTLB_ARF_WAYS << XCHAL_DTLB_ARF_ENTRIES_LOG2)
+#if _ITLB_ENTRIES > _DTLB_ENTRIES
+# define _TLB_ENTRIES _ITLB_ENTRIES
+#else
+# define _TLB_ENTRIES _DTLB_ENTRIES
+#endif
+
void flush_tlb_range (struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
#endif
local_save_flags(flags);
- if (end-start + (PAGE_SIZE-1) <= SMALLEST_NTLB_ENTRIES << PAGE_SHIFT) {
+ if (end-start + (PAGE_SIZE-1) <= _TLB_ENTRIES << PAGE_SHIFT) {
int oldpid = get_rasid_register();
set_rasid_register (ASID_INSERT(mm->context));
start &= PAGE_MASK;
set_rasid_register(oldpid);
} else {
- get_new_mmu_context(mm, asid_cache);
- if (mm == current->active_mm)
- set_rasid_register(ASID_INSERT(mm->context));
+ flush_tlb_mm(mm);
}
local_irq_restore(flags);
}
struct mm_struct* mm = vma->vm_mm;
unsigned long flags;
int oldpid;
-#if 0
- printk("[tlbpage<%02lx,%08lx>]\n",
- (unsigned long)mm->context, page);
-#endif
if(mm->context == NO_CONTEXT)
return;
set_rasid_register(oldpid);
local_irq_restore(flags);
-
-#if 0
- flush_tlb_all();
- return;
-#endif
-}
-
-
-#ifdef DEBUG_TLB
-
-#define USE_ITLB 0
-#define USE_DTLB 1
-
-struct way_config_t {
- int indicies;
- int indicies_log2;
- int pgsz_log2;
- int arf;
-};
-
-static struct way_config_t itlb[XCHAL_ITLB_WAYS] =
-{
- { XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, ENTRIES),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, ENTRIES_LOG2),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, PAGESZ_LOG2_MIN),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, ARF)
- },
- { XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, ENTRIES),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, ENTRIES_LOG2),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, PAGESZ_LOG2_MIN),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, ARF)
- },
- { XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, ENTRIES),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, ENTRIES_LOG2),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, PAGESZ_LOG2_MIN),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, ARF)
- },
- { XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, ENTRIES),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, ENTRIES_LOG2),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, PAGESZ_LOG2_MIN),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, ARF)
- },
- { XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, ENTRIES),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, ENTRIES_LOG2),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, PAGESZ_LOG2_MIN),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, ARF)
- },
- { XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, ENTRIES),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, ENTRIES_LOG2),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, PAGESZ_LOG2_MIN),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, ARF)
- },
- { XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, ENTRIES),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, ENTRIES_LOG2),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, PAGESZ_LOG2_MIN),
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, ARF)
- }
-};
-
-static struct way_config_t dtlb[XCHAL_DTLB_WAYS] =
-{
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, ARF)
- },
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, ARF)
- },
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, ARF)
- },
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, ARF)
- },
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, ARF)
- },
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, ARF)
- },
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, ARF)
- },
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, ARF)
- },
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, ARF)
- },
- { XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, ENTRIES),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, ENTRIES_LOG2),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, PAGESZ_LOG2_MIN),
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, ARF)
- }
-};
-
-/* Total number of entries: */
-#define ITLB_TOTAL_ENTRIES \
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY0_SET, ENTRIES) + \
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY1_SET, ENTRIES) + \
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY2_SET, ENTRIES) + \
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY3_SET, ENTRIES) + \
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY4_SET, ENTRIES) + \
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY5_SET, ENTRIES) + \
- XCHAL_ITLB_SET(XCHAL_ITLB_WAY6_SET, ENTRIES)
-#define DTLB_TOTAL_ENTRIES \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY0_SET, ENTRIES) + \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY1_SET, ENTRIES) + \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY2_SET, ENTRIES) + \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY3_SET, ENTRIES) + \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY4_SET, ENTRIES) + \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY5_SET, ENTRIES) + \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY6_SET, ENTRIES) + \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY7_SET, ENTRIES) + \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY8_SET, ENTRIES) + \
- XCHAL_DTLB_SET(XCHAL_DTLB_WAY9_SET, ENTRIES)
-
-
-typedef struct {
- unsigned va;
- unsigned pa;
- unsigned char asid;
- unsigned char ca;
- unsigned char way;
- unsigned char index;
- unsigned char pgsz_log2; /* 0 .. 32 */
- unsigned char type; /* 0=ITLB 1=DTLB */
-} tlb_dump_entry_t;
-
-/* Return -1 if a precedes b, +1 if a follows b, 0 if same: */
-int cmp_tlb_dump_info( tlb_dump_entry_t *a, tlb_dump_entry_t *b )
-{
- if (a->asid < b->asid) return -1;
- if (a->asid > b->asid) return 1;
- if (a->va < b->va) return -1;
- if (a->va > b->va) return 1;
- if (a->pa < b->pa) return -1;
- if (a->pa > b->pa) return 1;
- if (a->ca < b->ca) return -1;
- if (a->ca > b->ca) return 1;
- if (a->way < b->way) return -1;
- if (a->way > b->way) return 1;
- if (a->index < b->index) return -1;
- if (a->index > b->index) return 1;
- return 0;
-}
-
-void sort_tlb_dump_info( tlb_dump_entry_t *t, int n )
-{
- int i, j;
- /* Simple O(n*n) sort: */
- for (i = 0; i < n-1; i++)
- for (j = i+1; j < n; j++)
- if (cmp_tlb_dump_info(t+i, t+j) > 0) {
- tlb_dump_entry_t tmp = t[i];
- t[i] = t[j];
- t[j] = tmp;
- }
-}
-
-
-static tlb_dump_entry_t itlb_dump_info[ITLB_TOTAL_ENTRIES];
-static tlb_dump_entry_t dtlb_dump_info[DTLB_TOTAL_ENTRIES];
-
-
-static inline char *way_type (int type)
-{
- return type ? "autorefill" : "non-autorefill";
-}
-
-void print_entry (struct way_config_t *way_info,
- unsigned int way,
- unsigned int index,
- unsigned int virtual,
- unsigned int translation)
-{
- char valid_chr;
- unsigned int va, pa, asid, ca;
-
- va = virtual &
- ~((1 << (way_info->pgsz_log2 + way_info->indicies_log2)) - 1);
- asid = virtual & ((1 << XCHAL_MMU_ASID_BITS) - 1);
- pa = translation & ~((1 << way_info->pgsz_log2) - 1);
- ca = translation & ((1 << XCHAL_MMU_CA_BITS) - 1);
- valid_chr = asid ? 'V' : 'I';
-
- /* Compute and incorporate the effect of the index bits on the
- * va. It's more useful for kernel debugging, since we always
- * want to know the effective va anyway. */
-
- va += index << way_info->pgsz_log2;
-
- printk ("\t[%d,%d] (%c) vpn 0x%.8x ppn 0x%.8x asid 0x%.2x am 0x%x\n",
- way, index, valid_chr, va, pa, asid, ca);
-}
-
-void print_itlb_entry (struct way_config_t *way_info, int way, int index)
-{
- print_entry (way_info, way, index,
- read_itlb_virtual (way + (index << way_info->pgsz_log2)),
- read_itlb_translation (way + (index << way_info->pgsz_log2)));
-}
-
-void print_dtlb_entry (struct way_config_t *way_info, int way, int index)
-{
- print_entry (way_info, way, index,
- read_dtlb_virtual (way + (index << way_info->pgsz_log2)),
- read_dtlb_translation (way + (index << way_info->pgsz_log2)));
-}
-
-void dump_itlb (void)
-{
- int way, index;
-
- printk ("\nITLB: ways = %d\n", XCHAL_ITLB_WAYS);
-
- for (way = 0; way < XCHAL_ITLB_WAYS; way++) {
- printk ("\nWay: %d, Entries: %d, MinPageSize: %d, Type: %s\n",
- way, itlb[way].indicies,
- itlb[way].pgsz_log2, way_type(itlb[way].arf));
- for (index = 0; index < itlb[way].indicies; index++) {
- print_itlb_entry(&itlb[way], way, index);
- }
- }
-}
-
-void dump_dtlb (void)
-{
- int way, index;
-
- printk ("\nDTLB: ways = %d\n", XCHAL_DTLB_WAYS);
-
- for (way = 0; way < XCHAL_DTLB_WAYS; way++) {
- printk ("\nWay: %d, Entries: %d, MinPageSize: %d, Type: %s\n",
- way, dtlb[way].indicies,
- dtlb[way].pgsz_log2, way_type(dtlb[way].arf));
- for (index = 0; index < dtlb[way].indicies; index++) {
- print_dtlb_entry(&dtlb[way], way, index);
- }
- }
-}
-
-void dump_tlb (tlb_dump_entry_t *tinfo, struct way_config_t *config,
- int entries, int ways, int type, int show_invalid)
-{
- tlb_dump_entry_t *e = tinfo;
- int way, i;
-
- /* Gather all info: */
- for (way = 0; way < ways; way++) {
- struct way_config_t *cfg = config + way;
- for (i = 0; i < cfg->indicies; i++) {
- unsigned wayindex = way + (i << cfg->pgsz_log2);
- unsigned vv = (type ? read_dtlb_virtual (wayindex)
- : read_itlb_virtual (wayindex));
- unsigned pp = (type ? read_dtlb_translation (wayindex)
- : read_itlb_translation (wayindex));
-
- /* Compute and incorporate the effect of the index bits on the
- * va. It's more useful for kernel debugging, since we always
- * want to know the effective va anyway. */
-
- e->va = (vv & ~((1 << (cfg->pgsz_log2 + cfg->indicies_log2)) - 1));
- e->va += (i << cfg->pgsz_log2);
- e->pa = (pp & ~((1 << cfg->pgsz_log2) - 1));
- e->asid = (vv & ((1 << XCHAL_MMU_ASID_BITS) - 1));
- e->ca = (pp & ((1 << XCHAL_MMU_CA_BITS) - 1));
- e->way = way;
- e->index = i;
- e->pgsz_log2 = cfg->pgsz_log2;
- e->type = type;
- e++;
- }
- }
-#if 1
- /* Sort by ASID and VADDR: */
- sort_tlb_dump_info (tinfo, entries);
-#endif
-
- /* Display all sorted info: */
- printk ("\n%cTLB dump:\n", (type ? 'D' : 'I'));
- for (e = tinfo, i = 0; i < entries; i++, e++) {
-#if 0
- if (e->asid == 0 && !show_invalid)
- continue;
-#endif
- printk ("%c way=%d i=%d ASID=%02X V=%08X -> P=%08X CA=%X (%d %cB)\n",
- (e->type ? 'D' : 'I'), e->way, e->index,
- e->asid, e->va, e->pa, e->ca,
- (1 << (e->pgsz_log2 % 10)),
- " kMG"[e->pgsz_log2 / 10]
- );
- }
-}
-
-void dump_tlbs2 (int showinv)
-{
- dump_tlb (itlb_dump_info, itlb, ITLB_TOTAL_ENTRIES, XCHAL_ITLB_WAYS, 0, showinv);
- dump_tlb (dtlb_dump_info, dtlb, DTLB_TOTAL_ENTRIES, XCHAL_DTLB_WAYS, 1, showinv);
-}
-
-void dump_all_tlbs (void)
-{
- dump_tlbs2 (1);
-}
-
-void dump_valid_tlbs (void)
-{
- dump_tlbs2 (0);
}
-
-void dump_tlbs (void)
-{
- dump_itlb();
- dump_dtlb();
-}
-
-void dump_cache_tag(int dcache, int idx)
-{
- int w, i, s, e;
- unsigned long tag, index;
- unsigned long num_lines, num_ways, cache_size, line_size;
-
- num_ways = dcache ? XCHAL_DCACHE_WAYS : XCHAL_ICACHE_WAYS;
- cache_size = dcache ? XCHAL_DCACHE_SIZE : XCHAL_ICACHE_SIZE;
- line_size = dcache ? XCHAL_DCACHE_LINESIZE : XCHAL_ICACHE_LINESIZE;
-
- num_lines = cache_size / num_ways;
-
- s = 0; e = num_lines;
-
- if (idx >= 0)
- e = (s = idx * line_size) + 1;
-
- for (i = s; i < e; i+= line_size) {
- printk("\nline %#08x:", i);
- for (w = 0; w < num_ways; w++) {
- index = w * num_lines + i;
- if (dcache)
- __asm__ __volatile__("ldct %0, %1\n\t"
- : "=a"(tag) : "a"(index));
- else
- __asm__ __volatile__("lict %0, %1\n\t"
- : "=a"(tag) : "a"(index));
-
- printk(" %#010lx", tag);
- }
- }
- printk ("\n");
-}
-
-void dump_icache(int index)
-{
- unsigned long data, addr;
- int w, i;
-
- const unsigned long num_ways = XCHAL_ICACHE_WAYS;
- const unsigned long cache_size = XCHAL_ICACHE_SIZE;
- const unsigned long line_size = XCHAL_ICACHE_LINESIZE;
- const unsigned long num_lines = cache_size / num_ways / line_size;
-
- for (w = 0; w < num_ways; w++) {
- printk ("\nWay %d", w);
-
- for (i = 0; i < line_size; i+= 4) {
- addr = w * num_lines + index * line_size + i;
- __asm__ __volatile__("licw %0, %1\n\t"
- : "=a"(data) : "a"(addr));
- printk(" %#010lx", data);
- }
- }
- printk ("\n");
-}
-
-void dump_cache_tags(void)
-{
- printk("Instruction cache\n");
- dump_cache_tag(0, -1);
- printk("Data cache\n");
- dump_cache_tag(1, -1);
-}
-
-#endif
#include <asm/uaccess.h>
#include <asm/irq.h>
-#include <xtensa/simcall.h>
+#include <asm/platform/simcall.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
+#ifdef SERIAL_INLINE
+#define _INLINE_ inline
+#endif
+
#define SERIAL_MAX_NUM_LINES 1
#define SERIAL_TIMER_VALUE (20 * HZ)
}
-static const struct tty_operations serial_ops = {
+static struct tty_operations serial_ops = {
.open = rs_open,
.close = rs_close,
.write = rs_write,
#include <linux/timer.h>
#include <linux/platform_device.h>
-#include <xtensa/simcall.h>
+#include <asm/platform/simcall.h>
#define DRIVER_NAME "iss-netdev"
#define ETH_MAX_PACKET 1500
static int __init as_init(void)
{
- int ret;
-
- ret = elv_register(&iosched_as);
- if (!ret) {
- /*
- * don't allow AS to get unregistered, since we would have
- * to browse all tasks in the system and release their
- * as_io_context first
- */
- __module_get(THIS_MODULE);
- return 0;
- }
-
- return ret;
+ return elv_register(&iosched_as);
}
static void __exit as_exit(void)
return !cfqd->busy_queues;
}
-static inline pid_t cfq_queue_pid(struct task_struct *task, int rw)
+static inline pid_t cfq_queue_pid(struct task_struct *task, int rw, int is_sync)
{
- if (rw == READ || rw == WRITE_SYNC)
+ /*
+ * Use the per-process queue, for read requests and syncronous writes
+ */
+ if (!(rw & REQ_RW) || is_sync)
return task->pid;
return CFQ_KEY_ASYNC;
cfq_find_rq_fmerge(struct cfq_data *cfqd, struct bio *bio)
{
struct task_struct *tsk = current;
- pid_t key = cfq_queue_pid(tsk, bio_data_dir(bio));
+ pid_t key = cfq_queue_pid(tsk, bio_data_dir(bio), bio_sync(bio));
struct cfq_queue *cfqq;
cfqq = cfq_find_cfq_hash(cfqd, key, tsk->ioprio);
struct cfq_data *cfqd = q->elevator->elevator_data;
struct task_struct *tsk = current;
struct cfq_queue *cfqq;
+ unsigned int key;
+
+ key = cfq_queue_pid(tsk, rw, rw & REQ_RW_SYNC);
/*
* don't force setup of a queue from here, as a call to may_queue
* so just lookup a possibly existing queue, or return 'may queue'
* if that fails
*/
- cfqq = cfq_find_cfq_hash(cfqd, cfq_queue_pid(tsk, rw), tsk->ioprio);
+ cfqq = cfq_find_cfq_hash(cfqd, key, tsk->ioprio);
if (cfqq) {
cfq_init_prio_data(cfqq);
cfq_prio_boost(cfqq);
struct task_struct *tsk = current;
struct cfq_io_context *cic;
const int rw = rq_data_dir(rq);
- pid_t key = cfq_queue_pid(tsk, rw);
+ const int is_sync = rq_is_sync(rq);
+ pid_t key = cfq_queue_pid(tsk, rw, is_sync);
struct cfq_queue *cfqq;
unsigned long flags;
- int is_sync = key != CFQ_KEY_ASYNC;
might_sleep_if(gfp_mask & __GFP_WAIT);
.show = disk_stats_read
};
+#ifdef CONFIG_FAIL_MAKE_REQUEST
+
+static ssize_t disk_fail_store(struct gendisk * disk,
+ const char *buf, size_t count)
+{
+ int i;
+
+ if (count > 0 && sscanf(buf, "%d", &i) > 0) {
+ if (i == 0)
+ disk->flags &= ~GENHD_FL_FAIL;
+ else
+ disk->flags |= GENHD_FL_FAIL;
+ }
+
+ return count;
+}
+static ssize_t disk_fail_read(struct gendisk * disk, char *page)
+{
+ return sprintf(page, "%d\n", disk->flags & GENHD_FL_FAIL ? 1 : 0);
+}
+static struct disk_attribute disk_attr_fail = {
+ .attr = {.name = "make-it-fail", .mode = S_IRUGO | S_IWUSR },
+ .store = disk_fail_store,
+ .show = disk_fail_read
+};
+
+#endif
+
static struct attribute * default_attrs[] = {
&disk_attr_uevent.attr,
&disk_attr_dev.attr,
&disk_attr_removable.attr,
&disk_attr_size.attr,
&disk_attr_stat.attr,
+#ifdef CONFIG_FAIL_MAKE_REQUEST
+ &disk_attr_fail.attr,
+#endif
NULL,
};
bdevp = bdget_disk(disk, part);
if (!bdevp)
return -ENOMEM;
- mutex_lock_nested(&bdevp->bd_mutex, BD_MUTEX_PARTITION);
+ mutex_lock(&bdevp->bd_mutex);
if (bdevp->bd_openers) {
mutex_unlock(&bdevp->bd_mutex);
bdput(bdevp);
fsync_bdev(bdevp);
invalidate_bdev(bdevp, 0);
- mutex_lock_nested(&bdev->bd_mutex, BD_MUTEX_WHOLE);
+ mutex_lock(&bdev->bd_mutex);
delete_partition(disk, part);
mutex_unlock(&bdev->bd_mutex);
mutex_unlock(&bdevp->bd_mutex);
ENOIOCTLCMD for unknown ioctls. */
long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
- struct block_device *bdev = file->f_dentry->d_inode->i_bdev;
+ struct block_device *bdev = file->f_path.dentry->d_inode->i_bdev;
struct gendisk *disk = bdev->bd_disk;
int ret = -ENOIOCTLCMD;
if (disk->fops->compat_ioctl) {
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/writeback.h>
+#include <linux/task_io_accounting_ops.h>
#include <linux/interrupt.h>
#include <linux/cpu.h>
#include <linux/blktrace_api.h>
+#include <linux/fault-inject.h>
/*
* for max sense size
}
EXPORT_SYMBOL(blk_get_backing_dev_info);
-void blk_queue_activity_fn(request_queue_t *q, activity_fn *fn, void *data)
-{
- q->activity_fn = fn;
- q->activity_data = data;
-}
-EXPORT_SYMBOL(blk_queue_activity_fn);
-
/**
* blk_queue_prep_rq - set a prepare_request function for queue
* @q: queue
* by default assume old behaviour and bounce for any highmem page
*/
blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
-
- blk_queue_activity_fn(q, NULL, NULL);
}
EXPORT_SYMBOL(blk_queue_make_request);
* Returns NULL on failure, with queue_lock held.
* Returns !NULL on success, with queue_lock *not held*.
*/
-static struct request *get_request(request_queue_t *q, int rw, struct bio *bio,
- gfp_t gfp_mask)
+static struct request *get_request(request_queue_t *q, int rw_flags,
+ struct bio *bio, gfp_t gfp_mask)
{
struct request *rq = NULL;
struct request_list *rl = &q->rq;
struct io_context *ioc = NULL;
+ const int rw = rw_flags & 0x01;
int may_queue, priv;
- may_queue = elv_may_queue(q, rw);
+ may_queue = elv_may_queue(q, rw_flags);
if (may_queue == ELV_MQUEUE_NO)
goto rq_starved;
spin_unlock_irq(q->queue_lock);
- rq = blk_alloc_request(q, rw, priv, gfp_mask);
+ rq = blk_alloc_request(q, rw_flags, priv, gfp_mask);
if (unlikely(!rq)) {
/*
* Allocation failed presumably due to memory. Undo anything
*
* Called with q->queue_lock held, and returns with it unlocked.
*/
-static struct request *get_request_wait(request_queue_t *q, int rw,
+static struct request *get_request_wait(request_queue_t *q, int rw_flags,
struct bio *bio)
{
+ const int rw = rw_flags & 0x01;
struct request *rq;
- rq = get_request(q, rw, bio, GFP_NOIO);
+ rq = get_request(q, rw_flags, bio, GFP_NOIO);
while (!rq) {
DEFINE_WAIT(wait);
struct request_list *rl = &q->rq;
prepare_to_wait_exclusive(&rl->wait[rw], &wait,
TASK_UNINTERRUPTIBLE);
- rq = get_request(q, rw, bio, GFP_NOIO);
+ rq = get_request(q, rw_flags, bio, GFP_NOIO);
if (!rq) {
struct io_context *ioc;
{
drive_stat_acct(req, req->nr_sectors, 1);
- if (q->activity_fn)
- q->activity_fn(q->activity_data, rq_data_dir(req));
-
/*
* elevator indicated where it wants this request to be
* inserted at elevator_merge time
int el_ret, nr_sectors, barrier, err;
const unsigned short prio = bio_prio(bio);
const int sync = bio_sync(bio);
+ int rw_flags;
nr_sectors = bio_sectors(bio);
get_rq:
/*
+ * This sync check and mask will be re-done in init_request_from_bio(),
+ * but we need to set it earlier to expose the sync flag to the
+ * rq allocator and io schedulers.
+ */
+ rw_flags = bio_data_dir(bio);
+ if (sync)
+ rw_flags |= REQ_RW_SYNC;
+
+ /*
* Grab a free request. This is might sleep but can not fail.
* Returns with the queue unlocked.
*/
- req = get_request_wait(q, bio_data_dir(bio), bio);
+ req = get_request_wait(q, rw_flags, bio);
/*
* After dropping the lock and possibly sleeping here, our request
set_bit(BIO_EOF, &bio->bi_flags);
}
+#ifdef CONFIG_FAIL_MAKE_REQUEST
+
+static DECLARE_FAULT_ATTR(fail_make_request);
+
+static int __init setup_fail_make_request(char *str)
+{
+ return setup_fault_attr(&fail_make_request, str);
+}
+__setup("fail_make_request=", setup_fail_make_request);
+
+static int should_fail_request(struct bio *bio)
+{
+ if ((bio->bi_bdev->bd_disk->flags & GENHD_FL_FAIL) ||
+ (bio->bi_bdev->bd_part && bio->bi_bdev->bd_part->make_it_fail))
+ return should_fail(&fail_make_request, bio->bi_size);
+
+ return 0;
+}
+
+static int __init fail_make_request_debugfs(void)
+{
+ return init_fault_attr_dentries(&fail_make_request,
+ "fail_make_request");
+}
+
+late_initcall(fail_make_request_debugfs);
+
+#else /* CONFIG_FAIL_MAKE_REQUEST */
+
+static inline int should_fail_request(struct bio *bio)
+{
+ return 0;
+}
+
+#endif /* CONFIG_FAIL_MAKE_REQUEST */
+
/**
* generic_make_request: hand a buffer to its device driver for I/O
* @bio: The bio describing the location in memory and on the device.
if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
goto end_io;
+ if (should_fail_request(bio))
+ goto end_io;
+
/*
* If this device has partitions, remap block n
* of partition p to block n+start(p) of the disk.
BIO_BUG_ON(!bio->bi_size);
BIO_BUG_ON(!bio->bi_io_vec);
bio->bi_rw |= rw;
- if (rw & WRITE)
+ if (rw & WRITE) {
count_vm_events(PGPGOUT, count);
- else
+ } else {
+ task_io_account_read(bio->bi_size);
count_vm_events(PGPGIN, count);
+ }
if (unlikely(block_dump)) {
char b[BDEVNAME_SIZE];
struct request *rq;
char sense[SCSI_SENSE_BUFFERSIZE];
unsigned char cmd[BLK_MAX_CDB];
+ struct bio *bio;
if (hdr->interface_id != 'S')
return -EINVAL;
rq->cmd_type = REQ_TYPE_BLOCK_PC;
- /*
- * bounce this after holding a reference to the original bio, it's
- * needed for proper unmapping
- */
- if (rq->bio)
- blk_queue_bounce(q, &rq->bio);
-
rq->timeout = jiffies_to_msecs(hdr->timeout);
if (!rq->timeout)
rq->timeout = q->sg_timeout;
if (ret)
goto out;
+ bio = rq->bio;
rq->retries = 0;
start_time = jiffies;
hdr->sb_len_wr = len;
}
+ rq->bio = bio;
if (blk_rq_unmap_user(rq))
ret = -EFAULT;
#include <linux/crypto.h>
#include <linux/errno.h>
#include <linux/kernel.h>
-#include <linux/io.h>
#include <linux/module.h>
#include <linux/scatterlist.h>
#include <linux/seq_file.h>
#define SHA384_DIGEST_SIZE 48
#define SHA512_DIGEST_SIZE 64
-#define SHA384_HMAC_BLOCK_SIZE 96
+#define SHA384_HMAC_BLOCK_SIZE 128
#define SHA512_HMAC_BLOCK_SIZE 128
struct sha512_ctx {
source "sound/Kconfig"
+source "drivers/hid/Kconfig"
+
source "drivers/usb/Kconfig"
source "drivers/mmc/Kconfig"
source "drivers/dma/Kconfig"
+source "drivers/kvm/Kconfig"
+
endmenu
obj-$(CONFIG_PCCARD) += pcmcia/
obj-$(CONFIG_DIO) += dio/
obj-$(CONFIG_SBUS) += sbus/
+obj-$(CONFIG_KVM) += kvm/
obj-$(CONFIG_ZORRO) += zorro/
obj-$(CONFIG_MAC) += macintosh/
obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
obj-$(CONFIG_SUPERH) += sh/
obj-$(CONFIG_GENERIC_TIME) += clocksource/
obj-$(CONFIG_DMA_ENGINE) += dma/
+obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
#ifdef TRACKBUFFER
BufferDrive = BufferSide = BufferTrack = -1;
/* Atari uses 512 - I want to eventually cope with 1K sectors */
- DMABuffer = (char *)kmalloc((FD1772_MAX_SECTORS+1)*512,GFP_KERNEL);
+ DMABuffer = kmalloc((FD1772_MAX_SECTORS+1)*512,GFP_KERNEL);
TrackBuffer = DMABuffer + 512;
#else
/* Allocate memory for the DMAbuffer - on the Atari this takes it
out of some special memory... */
- DMABuffer = (char *) kmalloc(2048); /* Copes with pretty large sectors */
+ DMABuffer = kmalloc(2048); /* Copes with pretty large sectors */
#endif
err = -ENOMEM;
if (!DMAbuffer)
if (ret >= 0){
ret = misc_register(&rtc_dev);
if(ret < 0)
- i2c_bit_del_bus(&ioc_ops);
+ i2c_del_adapter(&ioc_ops);
}
return ret;
config ACPI_BUTTON
tristate "Button"
+ depends on INPUT
default y
help
This driver handles events on the power, sleep and lid buttons.
config ACPI_ASUS
tristate "ASUS/Medion Laptop Extras"
depends on X86
+ select BACKLIGHT_CLASS_DEVICE
---help---
This driver provides support for extra features of ACPI-compatible
ASUS laptops. As some of Medion laptops are made by ASUS, it may also
config ACPI_IBM
tristate "IBM ThinkPad Laptop Extras"
depends on X86
+ select BACKLIGHT_CLASS_DEVICE
---help---
This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
If you are not sure, say N here.
+config ACPI_IBM_BAY
+ bool "Legacy Removable Bay Support"
+ depends on ACPI_IBM
+ depends on ACPI_BAY=n
+ default n
+ ---help---
+ Allows the ibm_acpi driver to handle removable bays.
+ This support is obsoleted by CONFIG_ACPI_BAY.
+
+ If you are not sure, say N here.
+
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
+ select BACKLIGHT_CLASS_DEVICE
---help---
This driver adds support for access to certain system settings
on "legacy free" Toshiba laptops. These laptops can be recognized by
static int acpi_ac_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_ac *ac = (struct acpi_ac *)seq->private;
+ struct acpi_ac *ac = seq->private;
if (!ac)
static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_ac *ac = (struct acpi_ac *)data;
+ struct acpi_ac *ac = data;
struct acpi_device *device = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- ac = (struct acpi_ac *)acpi_driver_data(device);
+ ac = acpi_driver_data(device);
status = acpi_remove_notify_handler(device->handle,
ACPI_ALL_NOTIFY, acpi_ac_notify);
if (!device || !acpi_driver_data(device))
return -EINVAL;
- mem_device = (struct acpi_memory_device *)acpi_driver_data(device);
+ mem_device = acpi_driver_data(device);
kfree(mem_device);
return 0;
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
+#include <linux/backlight.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
/* procdir we use */
static struct proc_dir_entry *asus_proc_dir;
+static struct backlight_device *asus_backlight_device;
+
/*
* This header is made available to allow proper configuration given model,
* revision number , ... this info cannot go in struct asus_hotk because it is
return rv;
}
-static int read_brightness(void)
+static int read_brightness(struct backlight_device *bd)
{
int value;
/*
* Change the brightness level
*/
-static void set_brightness(int value)
+static int set_brightness(int value)
{
acpi_status status = 0;
+ int ret = 0;
/* SPLV laptop */
if (hotk->methods->brightness_set) {
value, NULL))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
- return;
+ ret = -EIO;
+ goto out;
}
/* No SPLV method if we are here, act as appropriate */
- value -= read_brightness();
+ value -= read_brightness(NULL);
while (value != 0) {
status = acpi_evaluate_object(NULL, (value > 0) ?
hotk->methods->brightness_up :
if (ACPI_FAILURE(status))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
+ ret = -EIO;
}
- return;
+out:
+ return ret;
+}
+
+static int set_brightness_status(struct backlight_device *bd)
+{
+ return set_brightness(bd->props->brightness);
}
static int
proc_read_brn(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
- return sprintf(page, "%d\n", read_brightness());
+ return sprintf(page, "%d\n", read_brightness(NULL));
}
static int
if (ACPI_FAILURE(status))
printk(KERN_WARNING " Couldn't get the DSDT table header\n");
else
- asus_info = (struct acpi_table_header *)dsdt.pointer;
+ asus_info = dsdt.pointer;
/* We have to write 0 on init this far for all ASUS models */
if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
* asus_model_match() and try something completely different.
*/
if (buffer.pointer) {
- model = (union acpi_object *)buffer.pointer;
+ model = buffer.pointer;
switch (model->type) {
case ACPI_TYPE_STRING:
string = model->string.pointer;
printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n",
ASUS_ACPI_VERSION);
- hotk =
- (struct asus_hotk *)kmalloc(sizeof(struct asus_hotk), GFP_KERNEL);
+ hotk = kmalloc(sizeof(struct asus_hotk), GFP_KERNEL);
if (!hotk)
return -ENOMEM;
memset(hotk, 0, sizeof(struct asus_hotk));
return 0;
}
+static struct backlight_properties asus_backlight_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = read_brightness,
+ .update_status = set_brightness_status,
+ .max_brightness = 15,
+};
+
+static void __exit asus_acpi_exit(void)
+{
+ if (asus_backlight_device)
+ backlight_device_unregister(asus_backlight_device);
+
+ acpi_bus_unregister_driver(&asus_hotk_driver);
+ remove_proc_entry(PROC_ASUS, acpi_root_dir);
+
+ kfree(asus_info);
+
+ return;
+}
+
static int __init asus_acpi_init(void)
{
int result;
return result;
}
- return 0;
-}
-
-static void __exit asus_acpi_exit(void)
-{
- acpi_bus_unregister_driver(&asus_hotk_driver);
- remove_proc_entry(PROC_ASUS, acpi_root_dir);
-
- kfree(asus_info);
+ asus_backlight_device = backlight_device_register("asus",NULL,NULL,
+ &asus_backlight_data);
+ if (IS_ERR(asus_backlight_device)) {
+ printk(KERN_ERR "Could not register asus backlight device\n");
+ asus_backlight_device = NULL;
+ asus_acpi_exit();
+ }
- return;
+ return 0;
}
module_init(asus_acpi_init);
return -ENODEV;
}
- package = (union acpi_object *)buffer.pointer;
+ package = buffer.pointer;
/* Extract Package Data */
kfree(buffer.pointer);
if (!result)
- (*bif) = (struct acpi_battery_info *)data.pointer;
+ (*bif) = data.pointer;
return result;
}
return -ENODEV;
}
- package = (union acpi_object *)buffer.pointer;
+ package = buffer.pointer;
/* Extract Package Data */
kfree(buffer.pointer);
if (!result)
- (*bst) = (struct acpi_battery_status *)data.pointer;
+ (*bst) = data.pointer;
return result;
}
static int acpi_battery_read_info(struct seq_file *seq, void *offset)
{
int result = 0;
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
struct acpi_battery_info *bif = NULL;
char *units = "?";
static int acpi_battery_read_state(struct seq_file *seq, void *offset)
{
int result = 0;
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
struct acpi_battery_status *bst = NULL;
char *units = "?";
static int acpi_battery_read_alarm(struct seq_file *seq, void *offset)
{
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
char *units = "?";
{
int result = 0;
char alarm_string[12] = { '\0' };
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_battery *battery = (struct acpi_battery *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_battery *battery = m->private;
if (!battery || (count > sizeof(alarm_string) - 1))
static void acpi_battery_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_battery *battery = (struct acpi_battery *)data;
+ struct acpi_battery *battery = data;
struct acpi_device *device = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- battery = (struct acpi_battery *)acpi_driver_data(device);
+ battery = acpi_driver_data(device);
status = acpi_remove_notify_handler(device->handle,
ACPI_ALL_NOTIFY,
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/input.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_BUTTON_COMPONENT
ACPI_MODULE_NAME("acpi_button")
- MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION(ACPI_BUTTON_DRIVER_NAME);
MODULE_LICENSE("GPL");
.ops = {
.add = acpi_button_add,
.remove = acpi_button_remove,
- },
+ },
};
struct acpi_button {
struct acpi_device *device; /* Fixed button kludge */
- u8 type;
+ unsigned int type;
+ struct input_dev *input;
+ char phys[32]; /* for input device */
unsigned long pushed;
};
static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = (struct acpi_button *)seq->private;
-
+ struct acpi_button *button = seq->private;
if (!button || !button->device)
return 0;
static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = (struct acpi_button *)seq->private;
+ struct acpi_button *button = seq->private;
acpi_status status;
unsigned long state;
-
if (!button || !button->device)
return 0;
status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state);
- if (ACPI_FAILURE(status)) {
- seq_printf(seq, "state: unsupported\n");
- } else {
- seq_printf(seq, "state: %s\n",
- (state ? "open" : "closed"));
- }
-
+ seq_printf(seq, "state: %s\n",
+ ACPI_FAILURE(status) ? "unsupported" :
+ (state ? "open" : "closed"));
return 0;
}
static int acpi_button_add_fs(struct acpi_device *device)
{
struct proc_dir_entry *entry = NULL;
- struct acpi_button *button = NULL;
-
+ struct acpi_button *button;
if (!device || !acpi_driver_data(device))
return -EINVAL;
static int acpi_button_remove_fs(struct acpi_device *device)
{
- struct acpi_button *button = NULL;
-
+ struct acpi_button *button = acpi_driver_data(device);
- button = acpi_driver_data(device);
if (acpi_device_dir(device)) {
if (button->type == ACPI_BUTTON_TYPE_LID)
remove_proc_entry(ACPI_BUTTON_FILE_STATE,
static void acpi_button_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_button *button = (struct acpi_button *)data;
-
+ struct acpi_button *button = data;
+ struct input_dev *input;
if (!button || !button->device)
return;
switch (event) {
case ACPI_BUTTON_NOTIFY_STATUS:
+ input = button->input;
+
+ if (button->type == ACPI_BUTTON_TYPE_LID) {
+ struct acpi_handle *handle = button->device->handle;
+ unsigned long state;
+
+ if (!ACPI_FAILURE(acpi_evaluate_integer(handle, "_LID",
+ NULL, &state)))
+ input_report_switch(input, SW_LID, !state);
+
+ } else {
+ int keycode = test_bit(KEY_SLEEP, input->keybit) ?
+ KEY_SLEEP : KEY_POWER;
+
+ input_report_key(input, keycode, 1);
+ input_sync(input);
+ input_report_key(input, keycode, 0);
+ }
+ input_sync(input);
+
acpi_bus_generate_event(button->device, event,
++button->pushed);
break;
static acpi_status acpi_button_notify_fixed(void *data)
{
- struct acpi_button *button = (struct acpi_button *)data;
-
+ struct acpi_button *button = data;
if (!button)
return AE_BAD_PARAMETER;
return AE_OK;
}
-static int acpi_button_add(struct acpi_device *device)
+static int acpi_button_install_notify_handlers(struct acpi_button *button)
{
- int result = 0;
- acpi_status status = AE_OK;
- struct acpi_button *button = NULL;
+ acpi_status status;
+ switch (button->type) {
+ case ACPI_BUTTON_TYPE_POWERF:
+ status =
+ acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
+ acpi_button_notify_fixed,
+ button);
+ break;
+ case ACPI_BUTTON_TYPE_SLEEPF:
+ status =
+ acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
+ acpi_button_notify_fixed,
+ button);
+ break;
+ default:
+ status = acpi_install_notify_handler(button->device->handle,
+ ACPI_DEVICE_NOTIFY,
+ acpi_button_notify,
+ button);
+ break;
+ }
+
+ return ACPI_FAILURE(status) ? -ENODEV : 0;
+}
+
+static void acpi_button_remove_notify_handlers(struct acpi_button *button)
+{
+ switch (button->type) {
+ case ACPI_BUTTON_TYPE_POWERF:
+ acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
+ acpi_button_notify_fixed);
+ break;
+ case ACPI_BUTTON_TYPE_SLEEPF:
+ acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
+ acpi_button_notify_fixed);
+ break;
+ default:
+ acpi_remove_notify_handler(button->device->handle,
+ ACPI_DEVICE_NOTIFY,
+ acpi_button_notify);
+ break;
+ }
+}
+
+static int acpi_button_add(struct acpi_device *device)
+{
+ int error;
+ struct acpi_button *button;
+ struct input_dev *input;
if (!device)
return -EINVAL;
- button = kmalloc(sizeof(struct acpi_button), GFP_KERNEL);
+ button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
if (!button)
return -ENOMEM;
- memset(button, 0, sizeof(struct acpi_button));
button->device = device;
acpi_driver_data(device) = button;
+ button->input = input = input_allocate_device();
+ if (!input) {
+ error = -ENOMEM;
+ goto err_free_button;
+ }
+
/*
* Determine the button type (via hid), as fixed-feature buttons
* need to be handled a bit differently than generic-space.
} else {
printk(KERN_ERR PREFIX "Unsupported hid [%s]\n",
acpi_device_hid(device));
- result = -ENODEV;
- goto end;
+ error = -ENODEV;
+ goto err_free_input;
}
- result = acpi_button_add_fs(device);
- if (result)
- goto end;
+ error = acpi_button_add_fs(device);
+ if (error)
+ goto err_free_input;
+
+ error = acpi_button_install_notify_handlers(button);
+ if (error)
+ goto err_remove_fs;
+
+ snprintf(button->phys, sizeof(button->phys),
+ "%s/button/input0", acpi_device_hid(device));
+
+ input->name = acpi_device_name(device);
+ input->phys = button->phys;
+ input->id.bustype = BUS_HOST;
+ input->id.product = button->type;
switch (button->type) {
+ case ACPI_BUTTON_TYPE_POWER:
case ACPI_BUTTON_TYPE_POWERF:
- status =
- acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
- acpi_button_notify_fixed,
- button);
+ input->evbit[0] = BIT(EV_KEY);
+ set_bit(KEY_POWER, input->keybit);
break;
+
+ case ACPI_BUTTON_TYPE_SLEEP:
case ACPI_BUTTON_TYPE_SLEEPF:
- status =
- acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
- acpi_button_notify_fixed,
- button);
+ input->evbit[0] = BIT(EV_KEY);
+ set_bit(KEY_SLEEP, input->keybit);
break;
- default:
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_button_notify,
- button);
+
+ case ACPI_BUTTON_TYPE_LID:
+ input->evbit[0] = BIT(EV_SW);
+ set_bit(SW_LID, input->swbit);
break;
}
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto end;
- }
+ error = input_register_device(input);
+ if (error)
+ goto err_remove_handlers;
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
printk(KERN_INFO PREFIX "%s [%s]\n",
acpi_device_name(device), acpi_device_bid(device));
- end:
- if (result) {
- acpi_button_remove_fs(device);
- kfree(button);
- }
+ return 0;
- return result;
+ err_remove_handlers:
+ acpi_button_remove_notify_handlers(button);
+ err_remove_fs:
+ acpi_button_remove_fs(device);
+ err_free_input:
+ input_free_device(input);
+ err_free_button:
+ kfree(button);
+ return error;
}
static int acpi_button_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
- struct acpi_button *button = NULL;
-
+ struct acpi_button *button;
if (!device || !acpi_driver_data(device))
return -EINVAL;
button = acpi_driver_data(device);
- /* Unregister for device notifications. */
- switch (button->type) {
- case ACPI_BUTTON_TYPE_POWERF:
- status =
- acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
- acpi_button_notify_fixed);
- break;
- case ACPI_BUTTON_TYPE_SLEEPF:
- status =
- acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
- acpi_button_notify_fixed);
- break;
- default:
- status = acpi_remove_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_button_notify);
- break;
- }
-
+ acpi_button_remove_notify_handlers(button);
acpi_button_remove_fs(device);
-
+ input_unregister_device(button->input);
kfree(button);
return 0;
static int __init acpi_button_init(void)
{
- int result = 0;
-
+ int result;
acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
if (!acpi_button_dir)
static void __exit acpi_button_exit(void)
{
-
acpi_bus_unregister_driver(&acpi_button_driver);
if (acpi_power_dir)
if (acpi_lid_dir)
remove_proc_entry(ACPI_BUTTON_SUBCLASS_LID, acpi_button_dir);
remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
-
- return;
}
module_init(acpi_button_init);
acpi_status status = AE_OK;
struct acpi_container *pc = NULL;
- pc = (struct acpi_container *)acpi_driver_data(device);
+ pc = acpi_driver_data(device);
kfree(pc);
return status;
}
#include <linux/init.h>
#include <linux/types.h>
#include <linux/notifier.h>
+#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
MODULE_LICENSE("GPL");
static struct atomic_notifier_head dock_notifier_list;
+static struct platform_device dock_device;
+static char dock_device_name[] = "dock";
struct dock_station {
acpi_handle handle;
unsigned long last_dock_time;
u32 flags;
spinlock_t dd_lock;
- spinlock_t hp_lock;
+ struct mutex hp_lock;
struct list_head dependent_devices;
struct list_head hotplug_devices;
};
dock_add_hotplug_device(struct dock_station *ds,
struct dock_dependent_device *dd)
{
- spin_lock(&ds->hp_lock);
+ mutex_lock(&ds->hp_lock);
list_add_tail(&dd->hotplug_list, &ds->hotplug_devices);
- spin_unlock(&ds->hp_lock);
+ mutex_unlock(&ds->hp_lock);
}
/**
dock_del_hotplug_device(struct dock_station *ds,
struct dock_dependent_device *dd)
{
- spin_lock(&ds->hp_lock);
+ mutex_lock(&ds->hp_lock);
list_del(&dd->hotplug_list);
- spin_unlock(&ds->hp_lock);
+ mutex_unlock(&ds->hp_lock);
}
/**
{
struct dock_dependent_device *dd;
- spin_lock(&ds->hp_lock);
+ mutex_lock(&ds->hp_lock);
/*
* First call driver specific hotplug functions
else
dock_create_acpi_device(dd->handle);
}
- spin_unlock(&ds->hp_lock);
+ mutex_unlock(&ds->hp_lock);
}
static void dock_event(struct dock_station *ds, u32 event, int num)
{
+ struct device *dev = &dock_device.dev;
/*
- * we don't do events until someone tells me that
- * they would like to have them.
+ * Indicate that the status of the dock station has
+ * changed.
*/
+ kobject_uevent(&dev->kobj, KOBJ_CHANGE);
}
/**
*/
int register_dock_notifier(struct notifier_block *nb)
{
+ if (!dock_station)
+ return -ENODEV;
+
return atomic_notifier_chain_register(&dock_notifier_list, nb);
}
*/
void unregister_dock_notifier(struct notifier_block *nb)
{
+ if (!dock_station)
+ return;
+
atomic_notifier_chain_unregister(&dock_notifier_list, nb);
}
EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device);
/**
+ * handle_eject_request - handle an undock request checking for error conditions
+ *
+ * Check to make sure the dock device is still present, then undock and
+ * hotremove all the devices that may need removing.
+ */
+static int handle_eject_request(struct dock_station *ds, u32 event)
+{
+ if (!dock_present(ds))
+ return -ENODEV;
+
+ if (dock_in_progress(ds))
+ return -EBUSY;
+
+ /*
+ * here we need to generate the undock
+ * event prior to actually doing the undock
+ * so that the device struct still exists.
+ */
+ dock_event(ds, event, UNDOCK_EVENT);
+ hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
+ undock(ds);
+ eject_dock(ds);
+ if (dock_present(ds)) {
+ printk(KERN_ERR PREFIX "Unable to undock!\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+/**
* dock_notify - act upon an acpi dock notification
* @handle: the dock station handle
* @event: the acpi event
*
* If we are notified to dock, then check to see if the dock is
* present and then dock. Notify all drivers of the dock event,
- * and then hotplug and devices that may need hotplugging. For undock
- * check to make sure the dock device is still present, then undock
- * and hotremove all the devices that may need removing.
+ * and then hotplug and devices that may need hotplugging.
*/
static void dock_notify(acpi_handle handle, u32 event, void *data)
{
- struct dock_station *ds = (struct dock_station *)data;
+ struct dock_station *ds = data;
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
* to the driver who wish to hotplug.
*/
case ACPI_NOTIFY_EJECT_REQUEST:
- if (!dock_in_progress(ds) && dock_present(ds)) {
- /*
- * here we need to generate the undock
- * event prior to actually doing the undock
- * so that the device struct still exists.
- */
- dock_event(ds, event, UNDOCK_EVENT);
- hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
- undock(ds);
- eject_dock(ds);
- if (dock_present(ds))
- printk(KERN_ERR PREFIX "Unable to undock!\n");
- }
+ handle_eject_request(ds, event);
break;
default:
printk(KERN_ERR PREFIX "Unknown dock event %d\n", event);
{
acpi_status status;
acpi_handle tmp;
- struct dock_station *ds = (struct dock_station *)context;
+ struct dock_station *ds = context;
struct dock_dependent_device *dd;
status = acpi_bus_get_ejd(handle, &tmp);
return AE_OK;
}
+/*
+ * show_docked - read method for "docked" file in sysfs
+ */
+static ssize_t show_docked(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", dock_present(dock_station));
+
+}
+DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL);
+
+/*
+ * write_undock - write method for "undock" file in sysfs
+ */
+static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+
+ if (!count)
+ return -EINVAL;
+
+ ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST);
+ return ret ? ret: count;
+}
+DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock);
+
/**
* dock_add - add a new dock station
* @handle: the dock station handle
INIT_LIST_HEAD(&dock_station->dependent_devices);
INIT_LIST_HEAD(&dock_station->hotplug_devices);
spin_lock_init(&dock_station->dd_lock);
- spin_lock_init(&dock_station->hp_lock);
+ mutex_init(&dock_station->hp_lock);
ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
+ /* initialize platform device stuff */
+ dock_device.name = dock_device_name;
+ ret = platform_device_register(&dock_device);
+ if (ret) {
+ printk(KERN_ERR PREFIX "Error %d registering dock device\n", ret);
+ kfree(dock_station);
+ return ret;
+ }
+ ret = device_create_file(&dock_device.dev, &dev_attr_docked);
+ if (ret) {
+ printk("Error %d adding sysfs file\n", ret);
+ platform_device_unregister(&dock_device);
+ kfree(dock_station);
+ return ret;
+ }
+ ret = device_create_file(&dock_device.dev, &dev_attr_undock);
+ if (ret) {
+ printk("Error %d adding sysfs file\n", ret);
+ device_remove_file(&dock_device.dev, &dev_attr_docked);
+ platform_device_unregister(&dock_device);
+ kfree(dock_station);
+ return ret;
+ }
+
/* Find dependent devices */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_dock_devices, dock_station,
dd = alloc_dock_dependent_device(handle);
if (!dd) {
kfree(dock_station);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto dock_add_err_unregister;
}
add_dock_dependent_device(dock_station, dd);
return 0;
dock_add_err:
- kfree(dock_station);
kfree(dd);
+dock_add_err_unregister:
+ device_remove_file(&dock_device.dev, &dev_attr_docked);
+ device_remove_file(&dock_device.dev, &dev_attr_undock);
+ platform_device_unregister(&dock_device);
+ kfree(dock_station);
return ret;
}
if (ACPI_FAILURE(status))
printk(KERN_ERR "Error removing notify handler\n");
+ /* cleanup sysfs */
+ device_remove_file(&dock_device.dev, &dev_attr_docked);
+ device_remove_file(&dock_device.dev, &dev_attr_undock);
+ platform_device_unregister(&dock_device);
+
/* free dock station memory */
kfree(dock_station);
return 0;
static acpi_status
find_dock(acpi_handle handle, u32 lvl, void *context, void **rv)
{
- int *count = (int *)context;
+ int *count = context;
acpi_status status = AE_OK;
if (is_dock(handle)) {
ACPI_UINT32_MAX, find_dock, &num, NULL);
if (!num)
- return -ENODEV;
+ printk(KERN_INFO "No dock devices found.\n");
return 0;
}
EXPORT_SYMBOL(ec_write);
-extern int ec_transaction(u8 command,
+int ec_transaction(u8 command,
const u8 * wdata, unsigned wdata_len,
u8 * rdata, unsigned rdata_len)
{
static u32 acpi_ev_global_lock_handler(void *context)
{
u8 acquired = FALSE;
- acpi_status status;
/*
* Attempt to get the lock
walk_state->thread->thread_id)
&& (obj_desc->mutex.os_mutex != ACPI_GLOBAL_LOCK)) {
ACPI_ERROR((AE_INFO,
- "Thread %X cannot release Mutex [%4.4s] acquired by thread %X",
- (u32) walk_state->thread->thread_id,
+ "Thread %lX cannot release Mutex [%4.4s] acquired by thread %lX",
+ (unsigned long)walk_state->thread->thread_id,
acpi_ut_get_node_name(obj_desc->mutex.node),
- (u32) obj_desc->mutex.owner_thread->thread_id));
+ (unsigned long)obj_desc->mutex.owner_thread->thread_id));
return_ACPI_STATUS(AE_AML_NOT_OWNER);
}
size_t count, loff_t * ppos)
{
int result = 0;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_fan *fan = (struct acpi_fan *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_fan *fan = m->private;
char state_string[12] = { '\0' };
if (!device || !acpi_driver_data(device))
return -EINVAL;
- fan = (struct acpi_fan *)acpi_driver_data(device);
+ fan = acpi_driver_data(device);
acpi_fan_remove_fs(device);
static acpi_status
do_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
- unsigned long *busnr = (unsigned long *)data;
+ unsigned long *busnr = data;
struct acpi_resource_address64 address;
if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
bus = tmp;
if (seg == find->seg && bus == find->bus)
+ {
find->handle = handle;
- status = AE_OK;
+ status = AE_CTRL_TERMINATE;
+ }
+ else
+ status = AE_OK;
exit:
kfree(buffer.pointer);
return status;
acpi_status status;
struct acpi_device_info *info;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_find_child *find = (struct acpi_find_child *)context;
+ struct acpi_find_child *find = context;
status = acpi_get_object_info(handle, &buffer);
if (ACPI_SUCCESS(status)) {
static int hotkey_polling_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_polling_hotkey *poll_hotkey =
- (struct acpi_polling_hotkey *)seq->private;
+ struct acpi_polling_hotkey *poll_hotkey = seq->private;
char *buf;
if (ACPI_FAILURE(status))
goto do_fail_zero;
key->poll_hotkey.poll_result =
- (union acpi_object *)kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+ kmalloc(sizeof(union acpi_object), GFP_KERNEL);
if (!key->poll_hotkey.poll_result)
goto do_fail_zero;
return AE_OK;
struct acpi_ec_hc *acpi_get_ec_hc(struct acpi_device *device)
{
- return ((struct acpi_ec_hc *)acpi_driver_data(device->parent));
+ return acpi_driver_data(device->parent);
}
EXPORT_SYMBOL(acpi_get_ec_hc);
*
*
* Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
+ * Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define IBM_VERSION "0.12a"
+#define IBM_VERSION "0.13"
/*
* Changelog:
+ *
+ * 2006-11-22 0.13 new maintainer
+ * changelog now lives in git commit history, and will
+ * not be updated further in-file.
*
* 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels
* 2005-03-17 0.11 support for 600e, 770x
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/string.h>
+
#include <linux/proc_fs.h>
+#include <linux/backlight.h>
#include <asm/uaccess.h>
+#include <linux/dmi.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+
#include <acpi/acpi_drivers.h>
#include <acpi/acnamesp.h>
#define IBM_FILE "ibm_acpi"
#define IBM_URL "http://ibm-acpi.sf.net/"
-MODULE_AUTHOR("Borislav Deianov");
+MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
MODULE_DESCRIPTION(IBM_DESC);
MODULE_VERSION(IBM_VERSION);
MODULE_LICENSE("GPL");
static char *object##_path; \
static char *object##_paths[] = { paths }
-/*
- * The following models are supported to various degrees:
- *
- * 570, 600e, 600x, 770e, 770x
- * A20m, A21e, A21m, A21p, A22p, A30, A30p, A31, A31p
- * G40, G41
- * R30, R31, R32, R40, R40e, R50, R50e, R50p, R51
- * T20, T21, T22, T23, T30, T40, T40p, T41, T41p, T42, T42p, T43
- * X20, X21, X22, X23, X24, X30, X31, X40
- *
- * The following models have no supported features:
- *
- * 240, 240x, i1400
- *
- * Still missing DSDTs for the following models:
- *
- * A20p, A22e, A22m
- * R52
- * S31
- * T43p
- */
-
IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */
"\\_SB.PCI.ISA.EC", /* 570 */
"\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */
"\\_SB.PCI.ISA.SLCE", /* 570 */
); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */
"\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
+ "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
"\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
); /* A21e, R30, R31 */
IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */
"_EJ0", /* 770x */
); /* all others */
+#endif
/* don't list other alternatives as we install a notify handler on the 570 */
IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */
IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */
IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */
-IBM_HANDLE(fans, ec, "FANS"); /* X31, X40 */
+IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */
IBM_HANDLE(gfan, ec, "GFAN", /* 570 */
"\\FSPD", /* 600e/x, 770e, 770x */
#define IBM_HKEY_HID "IBM0068"
#define IBM_PCI_HID "PNP0A03"
+enum thermal_access_mode {
+ IBMACPI_THERMAL_NONE = 0, /* No thermal support */
+ IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */
+ IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */
+ IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */
+ IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */
+};
+
+#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */
+struct ibm_thermal_sensors_struct {
+ s32 temp[IBMACPI_MAX_THERMAL_SENSORS];
+};
+
+/*
+ * FAN ACCESS MODES
+ *
+ * IBMACPI_FAN_RD_ACPI_GFAN:
+ * ACPI GFAN method: returns fan level
+ *
+ * see IBMACPI_FAN_WR_ACPI_SFAN
+ * EC 0x2f not available if GFAN exists
+ *
+ * IBMACPI_FAN_WR_ACPI_SFAN:
+ * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
+ *
+ * EC 0x2f might be available *for reading*, but never for writing.
+ *
+ * IBMACPI_FAN_WR_TPEC:
+ * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported
+ * on almost all ThinkPads
+ *
+ * Fan speed changes of any sort (including those caused by the
+ * disengaged mode) are usually done slowly by the firmware as the
+ * maximum ammount of fan duty cycle change per second seems to be
+ * limited.
+ *
+ * Reading is not available if GFAN exists.
+ * Writing is not available if SFAN exists.
+ *
+ * Bits
+ * 7 automatic mode engaged;
+ * (default operation mode of the ThinkPad)
+ * fan level is ignored in this mode.
+ * 6 disengage mode (takes precedence over bit 7);
+ * not available on all thinkpads. May disable
+ * the tachometer, and speeds up fan to 100% duty-cycle,
+ * which speeds it up far above the standard RPM
+ * levels. It is not impossible that it could cause
+ * hardware damage.
+ * 5-3 unused in some models. Extra bits for fan level
+ * in others, but still useless as all values above
+ * 7 map to the same speed as level 7 in these models.
+ * 2-0 fan level (0..7 usually)
+ * 0x00 = stop
+ * 0x07 = max (set when temperatures critical)
+ * Some ThinkPads may have other levels, see
+ * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
+ *
+ * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
+ * boot. Apparently the EC does not intialize it, so unless ACPI DSDT
+ * does so, its initial value is meaningless (0x07).
+ *
+ * For firmware bugs, refer to:
+ * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ * ----
+ *
+ * ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
+ * Main fan tachometer reading (in RPM)
+ *
+ * This register is present on all ThinkPads with a new-style EC, and
+ * it is known not to be present on the A21m/e, and T22, as there is
+ * something else in offset 0x84 according to the ACPI DSDT. Other
+ * ThinkPads from this same time period (and earlier) probably lack the
+ * tachometer as well.
+ *
+ * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
+ * was never fixed by IBM to report the EC firmware version string
+ * probably support the tachometer (like the early X models), so
+ * detecting it is quite hard. We need more data to know for sure.
+ *
+ * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
+ * might result.
+ *
+ * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this
+ * register is not invalidated in ThinkPads that disable tachometer
+ * readings. Thus, the tachometer readings go stale.
+ *
+ * For firmware bugs, refer to:
+ * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
+ *
+ * IBMACPI_FAN_WR_ACPI_FANS:
+ * ThinkPad X31, X40, X41. Not available in the X60.
+ *
+ * FANS ACPI handle: takes three arguments: low speed, medium speed,
+ * high speed. ACPI DSDT seems to map these three speeds to levels
+ * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
+ * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
+ *
+ * The speeds are stored on handles
+ * (FANA:FAN9), (FANC:FANB), (FANE:FAND).
+ *
+ * There are three default speed sets, acessible as handles:
+ * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
+ *
+ * ACPI DSDT switches which set is in use depending on various
+ * factors.
+ *
+ * IBMACPI_FAN_WR_TPEC is also available and should be used to
+ * command the fan. The X31/X40/X41 seems to have 8 fan levels,
+ * but the ACPI tables just mention level 7.
+ */
+
+enum fan_status_access_mode {
+ IBMACPI_FAN_NONE = 0, /* No fan status or control */
+ IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */
+ IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */
+};
+
+enum fan_control_access_mode {
+ IBMACPI_FAN_WR_NONE = 0, /* No fan control */
+ IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */
+ IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */
+ IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */
+};
+
+enum fan_control_commands {
+ IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */
+ IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */
+ IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd,
+ * and also watchdog cmd */
+};
+
+enum { /* Fan control constants */
+ fan_status_offset = 0x2f, /* EC register 0x2f */
+ fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
+ * 0x84 must be read before 0x85 */
+
+ IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer
+ * disengaged */
+ IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan
+ * control */
+};
+
+static char *ibm_thinkpad_ec_found = NULL;
+
struct ibm_struct {
char *name;
char param[32];
static struct proc_dir_entry *proc_dir = NULL;
+static struct backlight_device *ibm_backlight_device = NULL;
+
#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
{
int status;
- if (!wan_supported ||
- !acpi_evalf(hkey_handle, &status, "GWAN", "d"))
+ if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d"))
status = 0;
return status;
return 0;
}
-static int video_supported;
-static int video_orig_autosw;
+enum video_access_mode {
+ IBMACPI_VIDEO_NONE = 0,
+ IBMACPI_VIDEO_570, /* 570 */
+ IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */
+ IBMACPI_VIDEO_NEW, /* all others */
+};
-#define VIDEO_570 1
-#define VIDEO_770 2
-#define VIDEO_NEW 3
+static enum video_access_mode video_supported;
+static int video_orig_autosw;
static int video_init(void)
{
if (!vid_handle)
/* video switching not supported on R30, R31 */
- video_supported = 0;
+ video_supported = IBMACPI_VIDEO_NONE;
else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
/* 570 */
- video_supported = VIDEO_570;
+ video_supported = IBMACPI_VIDEO_570;
else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
/* 600e/x, 770e, 770x */
- video_supported = VIDEO_770;
+ video_supported = IBMACPI_VIDEO_770;
else
/* all others */
- video_supported = VIDEO_NEW;
+ video_supported = IBMACPI_VIDEO_NEW;
return 0;
}
int status = 0;
int i;
- if (video_supported == VIDEO_570) {
+ if (video_supported == IBMACPI_VIDEO_570) {
if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87))
status = i & 3;
- } else if (video_supported == VIDEO_770) {
+ } else if (video_supported == IBMACPI_VIDEO_770) {
if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
status |= 0x01 * i;
if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
status |= 0x02 * i;
- } else if (video_supported == VIDEO_NEW) {
+ } else if (video_supported == IBMACPI_VIDEO_NEW) {
acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1);
if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
status |= 0x02 * i;
{
int autosw = 0;
- if (video_supported == VIDEO_570)
+ if (video_supported == IBMACPI_VIDEO_570)
acpi_evalf(vid_handle, &autosw, "SWIT", "d");
- else if (video_supported == VIDEO_770 || video_supported == VIDEO_NEW)
+ else if (video_supported == IBMACPI_VIDEO_770 ||
+ video_supported == IBMACPI_VIDEO_NEW)
acpi_evalf(vid_handle, &autosw, "^VDEE", "d");
return autosw & 1;
len += sprintf(p + len, "status:\t\tsupported\n");
len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
- if (video_supported == VIDEO_NEW)
+ if (video_supported == IBMACPI_VIDEO_NEW)
len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
- if (video_supported == VIDEO_NEW)
+ if (video_supported == IBMACPI_VIDEO_NEW)
len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
return -EIO;
- ret = video_supported == VIDEO_570 ?
+ ret = video_supported == IBMACPI_VIDEO_570 ?
acpi_evalf(ec_handle, NULL, "_Q16", "v") :
acpi_evalf(vid_handle, NULL, "VSWT", "v");
acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
static int video_expand(void)
{
- if (video_supported == VIDEO_570)
+ if (video_supported == IBMACPI_VIDEO_570)
return acpi_evalf(ec_handle, NULL, "_Q17", "v");
- else if (video_supported == VIDEO_770)
+ else if (video_supported == IBMACPI_VIDEO_770)
return acpi_evalf(vid_handle, NULL, "VEXP", "v");
else
return acpi_evalf(NULL, NULL, "\\VEXP", "v");
{
int ret;
- if (video_supported == VIDEO_570) {
+ if (video_supported == IBMACPI_VIDEO_570) {
ret = acpi_evalf(NULL, NULL,
"\\_SB.PHS2", "vdd", 0x8b, status | 0x80);
- } else if (video_supported == VIDEO_770) {
+ } else if (video_supported == IBMACPI_VIDEO_770) {
int autosw = video_autosw();
if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
return -EIO;
enable |= 0x02;
} else if (strlencmp(cmd, "crt_disable") == 0) {
disable |= 0x02;
- } else if (video_supported == VIDEO_NEW &&
+ } else if (video_supported == IBMACPI_VIDEO_NEW &&
strlencmp(cmd, "dvi_enable") == 0) {
enable |= 0x08;
- } else if (video_supported == VIDEO_NEW &&
+ } else if (video_supported == IBMACPI_VIDEO_NEW &&
strlencmp(cmd, "dvi_disable") == 0) {
disable |= 0x08;
} else if (strlencmp(cmd, "auto_enable") == 0) {
return 0;
}
+#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY)
static int _sta(acpi_handle handle)
{
int status;
return status;
}
+#endif
#ifdef CONFIG_ACPI_IBM_DOCK
#define dock_docked() (_sta(dock_handle) & 1)
}
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
static int bay_status_supported;
static int bay_status2_supported;
static int bay_eject_supported;
{
acpi_bus_generate_event(ibm->device, event, 0);
}
+#endif
static int cmos_read(char *p)
{
return 0;
}
-static int led_supported;
-
-#define LED_570 1
-#define LED_OLD 2
-#define LED_NEW 3
+enum led_access_mode {
+ IBMACPI_LED_NONE = 0,
+ IBMACPI_LED_570, /* 570 */
+ IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
+ IBMACPI_LED_NEW, /* all others */
+};
+static enum led_access_mode led_supported;
static int led_init(void)
{
if (!led_handle)
/* led not supported on R30, R31 */
- led_supported = 0;
+ led_supported = IBMACPI_LED_NONE;
else if (strlencmp(led_path, "SLED") == 0)
/* 570 */
- led_supported = LED_570;
+ led_supported = IBMACPI_LED_570;
else if (strlencmp(led_path, "SYSL") == 0)
/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
- led_supported = LED_OLD;
+ led_supported = IBMACPI_LED_OLD;
else
/* all others */
- led_supported = LED_NEW;
+ led_supported = IBMACPI_LED_NEW;
return 0;
}
}
len += sprintf(p + len, "status:\t\tsupported\n");
- if (led_supported == LED_570) {
+ if (led_supported == IBMACPI_LED_570) {
/* 570 */
int i, status;
for (i = 0; i < 8; i++) {
} else
return -EINVAL;
- if (led_supported == LED_570) {
+ if (led_supported == IBMACPI_LED_570) {
/* 570 */
led = 1 << led;
if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
led, led_sled_arg1[ind]))
return -EIO;
- } else if (led_supported == LED_OLD) {
+ } else if (led_supported == IBMACPI_LED_OLD) {
/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
led = 1 << led;
ret = ec_write(EC_HLMS, led);
return 1;
}
-static int thermal_tmp_supported;
-static int thermal_updt_supported;
+static enum thermal_access_mode thermal_read_mode;
static int thermal_init(void)
{
- /* temperatures not supported on 570, G4x, R30, R31, R32 */
- thermal_tmp_supported = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
+ u8 t, ta1, ta2;
+ int i;
+ int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
+
+ if (ibm_thinkpad_ec_found && experimental) {
+ /*
+ * Direct EC access mode: sensors at registers
+ * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for
+ * non-implemented, thermal sensors return 0x80 when
+ * not available
+ */
- /* 600e/x, 770e, 770x */
- thermal_updt_supported = acpi_evalf(ec_handle, NULL, "UPDT", "qv");
+ ta1 = ta2 = 0;
+ for (i = 0; i < 8; i++) {
+ if (likely(acpi_ec_read(0x78 + i, &t))) {
+ ta1 |= t;
+ } else {
+ ta1 = 0;
+ break;
+ }
+ if (likely(acpi_ec_read(0xC0 + i, &t))) {
+ ta2 |= t;
+ } else {
+ ta1 = 0;
+ break;
+ }
+ }
+ if (ta1 == 0) {
+ /* This is sheer paranoia, but we handle it anyway */
+ if (acpi_tmp7) {
+ printk(IBM_ERR
+ "ThinkPad ACPI EC access misbehaving, "
+ "falling back to ACPI TMPx access mode\n");
+ thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
+ } else {
+ printk(IBM_ERR
+ "ThinkPad ACPI EC access misbehaving, "
+ "disabling thermal sensors access\n");
+ thermal_read_mode = IBMACPI_THERMAL_NONE;
+ }
+ } else {
+ thermal_read_mode =
+ (ta2 != 0) ?
+ IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8;
+ }
+ } else if (acpi_tmp7) {
+ if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
+ /* 600e/x, 770e, 770x */
+ thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT;
+ } else {
+ /* Standard ACPI TMPx access, max 8 sensors */
+ thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
+ }
+ } else {
+ /* temperatures not supported on 570, G4x, R30, R31, R32 */
+ thermal_read_mode = IBMACPI_THERMAL_NONE;
+ }
return 0;
}
-static int thermal_read(char *p)
+static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
{
- int len = 0;
+ int i, t;
+ s8 tmp;
+ char tmpi[] = "TMPi";
- if (!thermal_tmp_supported)
- len += sprintf(p + len, "temperatures:\tnot supported\n");
- else {
- int i, t;
- char tmpi[] = "TMPi";
- s8 tmp[8];
+ if (!s)
+ return -EINVAL;
- if (thermal_updt_supported)
- if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
+ switch (thermal_read_mode) {
+#if IBMACPI_MAX_THERMAL_SENSORS >= 16
+ case IBMACPI_THERMAL_TPEC_16:
+ for (i = 0; i < 8; i++) {
+ if (!acpi_ec_read(0xC0 + i, &tmp))
+ return -EIO;
+ s->temp[i + 8] = tmp * 1000;
+ }
+ /* fallthrough */
+#endif
+ case IBMACPI_THERMAL_TPEC_8:
+ for (i = 0; i < 8; i++) {
+ if (!acpi_ec_read(0x78 + i, &tmp))
return -EIO;
+ s->temp[i] = tmp * 1000;
+ }
+ return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8;
+ case IBMACPI_THERMAL_ACPI_UPDT:
+ if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
+ return -EIO;
for (i = 0; i < 8; i++) {
tmpi[3] = '0' + i;
if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
return -EIO;
- if (thermal_updt_supported)
- tmp[i] = (t - 2732 + 5) / 10;
- else
- tmp[i] = t;
+ s->temp[i] = (t - 2732) * 100;
}
+ return 8;
- len += sprintf(p + len,
- "temperatures:\t%d %d %d %d %d %d %d %d\n",
- tmp[0], tmp[1], tmp[2], tmp[3],
- tmp[4], tmp[5], tmp[6], tmp[7]);
+ case IBMACPI_THERMAL_ACPI_TMP07:
+ for (i = 0; i < 8; i++) {
+ tmpi[3] = '0' + i;
+ if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
+ return -EIO;
+ s->temp[i] = t * 1000;
+ }
+ return 8;
+
+ case IBMACPI_THERMAL_NONE:
+ default:
+ return 0;
}
+}
+
+static int thermal_read(char *p)
+{
+ int len = 0;
+ int n, i;
+ struct ibm_thermal_sensors_struct t;
+
+ n = thermal_get_sensors(&t);
+ if (unlikely(n < 0))
+ return n;
+
+ len += sprintf(p + len, "temperatures:\t");
+
+ if (n > 0) {
+ for (i = 0; i < (n - 1); i++)
+ len += sprintf(p + len, "%d ", t.temp[i] / 1000);
+ len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
+ } else
+ len += sprintf(p + len, "not supported\n");
return len;
}
static int brightness_offset = 0x31;
+static int brightness_get(struct backlight_device *bd)
+{
+ u8 level;
+ if (!acpi_ec_read(brightness_offset, &level))
+ return -EIO;
+
+ level &= 0x7;
+
+ return level;
+}
+
static int brightness_read(char *p)
{
int len = 0;
- u8 level;
+ int level;
- if (!acpi_ec_read(brightness_offset, &level)) {
+ if ((level = brightness_get(NULL)) < 0) {
len += sprintf(p + len, "level:\t\tunreadable\n");
} else {
len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
#define BRIGHTNESS_UP 4
#define BRIGHTNESS_DOWN 5
-static int brightness_write(char *buf)
+static int brightness_set(int value)
{
int cmos_cmd, inc, i;
- u8 level;
+ int current_value = brightness_get(NULL);
+
+ value &= 7;
+
+ cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
+ inc = value > current_value ? 1 : -1;
+ for (i = current_value; i != value; i += inc) {
+ if (!cmos_eval(cmos_cmd))
+ return -EIO;
+ if (!acpi_ec_write(brightness_offset, i + inc))
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int brightness_write(char *buf)
+{
+ int level;
int new_level;
char *cmd;
while ((cmd = next_cmd(&buf))) {
- if (!acpi_ec_read(brightness_offset, &level))
- return -EIO;
+ if ((level = brightness_get(NULL)) < 0)
+ return level;
level &= 7;
if (strlencmp(cmd, "up") == 0) {
} else
return -EINVAL;
- cmos_cmd = new_level > level ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
- inc = new_level > level ? 1 : -1;
- for (i = level; i != new_level; i += inc) {
- if (!cmos_eval(cmos_cmd))
- return -EIO;
- if (!acpi_ec_write(brightness_offset, i + inc))
- return -EIO;
- }
+ brightness_set(new_level);
}
return 0;
}
+static int brightness_update_status(struct backlight_device *bd)
+{
+ return brightness_set(bd->props->brightness);
+}
+
+static struct backlight_properties ibm_backlight_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = brightness_get,
+ .update_status = brightness_update_status,
+ .max_brightness = 7,
+};
+
+static int brightness_init(void)
+{
+ ibm_backlight_device = backlight_device_register("ibm", NULL, NULL,
+ &ibm_backlight_data);
+ if (IS_ERR(ibm_backlight_device)) {
+ printk(IBM_ERR "Could not register backlight device\n");
+ return PTR_ERR(ibm_backlight_device);
+ }
+
+ return 0;
+}
+
+static void brightness_exit(void)
+{
+ if (ibm_backlight_device) {
+ backlight_device_unregister(ibm_backlight_device);
+ ibm_backlight_device = NULL;
+ }
+}
+
static int volume_offset = 0x30;
static int volume_read(char *p)
return 0;
}
-static int fan_status_offset = 0x2f;
-static int fan_rpm_offset = 0x84;
+static enum fan_status_access_mode fan_status_access_mode;
+static enum fan_control_access_mode fan_control_access_mode;
+static enum fan_control_commands fan_control_commands;
-static int fan_read(char *p)
+static int fan_control_status_known;
+static u8 fan_control_initial_status;
+
+static void fan_watchdog_fire(struct work_struct *ignored);
+static int fan_watchdog_maxinterval;
+static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
+
+static int fan_init(void)
{
- int len = 0;
- int s;
- u8 lo, hi, status;
+ fan_status_access_mode = IBMACPI_FAN_NONE;
+ fan_control_access_mode = IBMACPI_FAN_WR_NONE;
+ fan_control_commands = 0;
+ fan_control_status_known = 1;
+ fan_watchdog_maxinterval = 0;
if (gfan_handle) {
/* 570, 600e/x, 770e, 770x */
- if (!acpi_evalf(gfan_handle, &s, NULL, "d"))
- return -EIO;
+ fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN;
+ } else {
+ /* all other ThinkPads: note that even old-style
+ * ThinkPad ECs supports the fan control register */
+ if (likely(acpi_ec_read(fan_status_offset,
+ &fan_control_initial_status))) {
+ fan_status_access_mode = IBMACPI_FAN_RD_TPEC;
+
+ /* In some ThinkPads, neither the EC nor the ACPI
+ * DSDT initialize the fan status, and it ends up
+ * being set to 0x07 when it *could* be either
+ * 0x07 or 0x80.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e),
+ * TP-76 (R52), TP-70 (T43, R52), which are known
+ * to be buggy. */
+ if (fan_control_initial_status == 0x07 &&
+ ibm_thinkpad_ec_found &&
+ ((ibm_thinkpad_ec_found[0] == '1' &&
+ ibm_thinkpad_ec_found[1] == 'Y') ||
+ (ibm_thinkpad_ec_found[0] == '7' &&
+ (ibm_thinkpad_ec_found[1] == '6' ||
+ ibm_thinkpad_ec_found[1] == '8' ||
+ ibm_thinkpad_ec_found[1] == '0'))
+ )) {
+ printk(IBM_NOTICE
+ "fan_init: initial fan status is "
+ "unknown, assuming it is in auto "
+ "mode\n");
+ fan_control_status_known = 0;
+ }
+ } else {
+ printk(IBM_ERR
+ "ThinkPad ACPI EC access misbehaving, "
+ "fan status and control unavailable\n");
+ return 0;
+ }
+ }
- len += sprintf(p + len, "level:\t\t%d\n", s);
+ if (sfan_handle) {
+ /* 570, 770x-JL */
+ fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN;
+ fan_control_commands |=
+ IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE;
} else {
+ if (!gfan_handle) {
+ /* gfan without sfan means no fan control */
+ /* all other models implement TP EC 0x2f control */
+
+ if (fans_handle) {
+ /* X31, X40, X41 */
+ fan_control_access_mode =
+ IBMACPI_FAN_WR_ACPI_FANS;
+ fan_control_commands |=
+ IBMACPI_FAN_CMD_SPEED |
+ IBMACPI_FAN_CMD_LEVEL |
+ IBMACPI_FAN_CMD_ENABLE;
+ } else {
+ fan_control_access_mode = IBMACPI_FAN_WR_TPEC;
+ fan_control_commands |=
+ IBMACPI_FAN_CMD_LEVEL |
+ IBMACPI_FAN_CMD_ENABLE;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int fan_get_status(u8 *status)
+{
+ u8 s;
+
+ /* TODO:
+ * Add IBMACPI_FAN_RD_ACPI_FANS ? */
+
+ switch (fan_status_access_mode) {
+ case IBMACPI_FAN_RD_ACPI_GFAN:
+ /* 570, 600e/x, 770e, 770x */
+
+ if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
+ return -EIO;
+
+ if (likely(status))
+ *status = s & 0x07;
+
+ break;
+
+ case IBMACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
- if (!acpi_ec_read(fan_status_offset, &status))
- len += sprintf(p + len, "status:\t\tunreadable\n");
- else
- len += sprintf(p + len, "status:\t\t%s\n",
- enabled(status, 7));
+ if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
+ return -EIO;
- if (!acpi_ec_read(fan_rpm_offset, &lo) ||
- !acpi_ec_read(fan_rpm_offset + 1, &hi))
- len += sprintf(p + len, "speed:\t\tunreadable\n");
- else
- len += sprintf(p + len, "speed:\t\t%d\n",
- (hi << 8) + lo);
+ if (likely(status))
+ *status = s;
+
+ break;
+
+ default:
+ return -ENXIO;
}
- if (sfan_handle)
- /* 570, 770x-JL */
- len += sprintf(p + len, "commands:\tlevel <level>"
- " (<level> is 0-7)\n");
- if (!gfan_handle)
+ return 0;
+}
+
+static int fan_get_speed(unsigned int *speed)
+{
+ u8 hi, lo;
+
+ switch (fan_status_access_mode) {
+ case IBMACPI_FAN_RD_TPEC:
/* all except 570, 600e/x, 770e, 770x */
- len += sprintf(p + len, "commands:\tenable, disable\n");
- if (fans_handle)
- /* X31, X40 */
+ if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
+ !acpi_ec_read(fan_rpm_offset + 1, &hi)))
+ return -EIO;
+
+ if (likely(speed))
+ *speed = (hi << 8) | lo;
+
+ break;
+
+ default:
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void fan_exit(void)
+{
+ cancel_delayed_work(&fan_watchdog_task);
+ flush_scheduled_work();
+}
+
+static void fan_watchdog_reset(void)
+{
+ static int fan_watchdog_active = 0;
+
+ if (fan_watchdog_active)
+ cancel_delayed_work(&fan_watchdog_task);
+
+ if (fan_watchdog_maxinterval > 0) {
+ fan_watchdog_active = 1;
+ if (!schedule_delayed_work(&fan_watchdog_task,
+ msecs_to_jiffies(fan_watchdog_maxinterval
+ * 1000))) {
+ printk(IBM_ERR "failed to schedule the fan watchdog, "
+ "watchdog will not trigger\n");
+ }
+ } else
+ fan_watchdog_active = 0;
+}
+
+static int fan_read(char *p)
+{
+ int len = 0;
+ int rc;
+ u8 status;
+ unsigned int speed = 0;
+
+ switch (fan_status_access_mode) {
+ case IBMACPI_FAN_RD_ACPI_GFAN:
+ /* 570, 600e/x, 770e, 770x */
+ if ((rc = fan_get_status(&status)) < 0)
+ return rc;
+
+ len += sprintf(p + len, "status:\t\t%s\n"
+ "level:\t\t%d\n",
+ (status != 0) ? "enabled" : "disabled", status);
+ break;
+
+ case IBMACPI_FAN_RD_TPEC:
+ /* all except 570, 600e/x, 770e, 770x */
+ if ((rc = fan_get_status(&status)) < 0)
+ return rc;
+
+ if (unlikely(!fan_control_status_known)) {
+ if (status != fan_control_initial_status)
+ fan_control_status_known = 1;
+ else
+ /* Return most likely status. In fact, it
+ * might be the only possible status */
+ status = IBMACPI_FAN_EC_AUTO;
+ }
+
+ len += sprintf(p + len, "status:\t\t%s\n",
+ (status != 0) ? "enabled" : "disabled");
+
+ /* No ThinkPad boots on disengaged mode, we can safely
+ * assume the tachometer is online if fan control status
+ * was unknown */
+ if ((rc = fan_get_speed(&speed)) < 0)
+ return rc;
+
+ len += sprintf(p + len, "speed:\t\t%d\n", speed);
+
+ if (status & IBMACPI_FAN_EC_DISENGAGED)
+ /* Disengaged mode takes precedence */
+ len += sprintf(p + len, "level:\t\tdisengaged\n");
+ else if (status & IBMACPI_FAN_EC_AUTO)
+ len += sprintf(p + len, "level:\t\tauto\n");
+ else
+ len += sprintf(p + len, "level:\t\t%d\n", status);
+ break;
+
+ case IBMACPI_FAN_NONE:
+ default:
+ len += sprintf(p + len, "status:\t\tnot supported\n");
+ }
+
+ if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) {
+ len += sprintf(p + len, "commands:\tlevel <level>");
+
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_SFAN:
+ len += sprintf(p + len, " (<level> is 0-7)\n");
+ break;
+
+ default:
+ len += sprintf(p + len, " (<level> is 0-7, "
+ "auto, disengaged)\n");
+ break;
+ }
+ }
+
+ if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE)
+ len += sprintf(p + len, "commands:\tenable, disable\n"
+ "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
+ "1-120 (seconds))\n");
+
+ if (fan_control_commands & IBMACPI_FAN_CMD_SPEED)
len += sprintf(p + len, "commands:\tspeed <speed>"
" (<speed> is 0-65535)\n");
return len;
}
-static int fan_write(char *buf)
+static int fan_set_level(int level)
{
- char *cmd;
- int level, speed;
-
- while ((cmd = next_cmd(&buf))) {
- if (sfan_handle &&
- sscanf(cmd, "level %d", &level) == 1 &&
- level >= 0 && level <= 7) {
- /* 570, 770x-JL */
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_SFAN:
+ if (level >= 0 && level <= 7) {
if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
return -EIO;
- } else if (!gfan_handle && strlencmp(cmd, "enable") == 0) {
- /* all except 570, 600e/x, 770e, 770x */
- if (!acpi_ec_write(fan_status_offset, 0x80))
- return -EIO;
- } else if (!gfan_handle && strlencmp(cmd, "disable") == 0) {
- /* all except 570, 600e/x, 770e, 770x */
- if (!acpi_ec_write(fan_status_offset, 0x00))
- return -EIO;
- } else if (fans_handle &&
- sscanf(cmd, "speed %d", &speed) == 1 &&
- speed >= 0 && speed <= 65535) {
- /* X31, X40 */
+ } else
+ return -EINVAL;
+ break;
+
+ case IBMACPI_FAN_WR_ACPI_FANS:
+ case IBMACPI_FAN_WR_TPEC:
+ if ((level != IBMACPI_FAN_EC_AUTO) &&
+ (level != IBMACPI_FAN_EC_DISENGAGED) &&
+ ((level < 0) || (level > 7)))
+ return -EINVAL;
+
+ if (!acpi_ec_write(fan_status_offset, level))
+ return -EIO;
+ else
+ fan_control_status_known = 1;
+ break;
+
+ default:
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int fan_set_enable(void)
+{
+ u8 s;
+ int rc;
+
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_FANS:
+ case IBMACPI_FAN_WR_TPEC:
+ if ((rc = fan_get_status(&s)) < 0)
+ return rc;
+
+ /* Don't go out of emergency fan mode */
+ if (s != 7)
+ s = IBMACPI_FAN_EC_AUTO;
+
+ if (!acpi_ec_write(fan_status_offset, s))
+ return -EIO;
+ else
+ fan_control_status_known = 1;
+ break;
+
+ case IBMACPI_FAN_WR_ACPI_SFAN:
+ if ((rc = fan_get_status(&s)) < 0)
+ return rc;
+
+ s &= 0x07;
+
+ /* Set fan to at least level 4 */
+ if (s < 4)
+ s = 4;
+
+ if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
+ return -EIO;
+ break;
+
+ default:
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int fan_set_disable(void)
+{
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_FANS:
+ case IBMACPI_FAN_WR_TPEC:
+ if (!acpi_ec_write(fan_status_offset, 0x00))
+ return -EIO;
+ else
+ fan_control_status_known = 1;
+ break;
+
+ case IBMACPI_FAN_WR_ACPI_SFAN:
+ if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
+ return -EIO;
+ break;
+
+ default:
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int fan_set_speed(int speed)
+{
+ switch (fan_control_access_mode) {
+ case IBMACPI_FAN_WR_ACPI_FANS:
+ if (speed >= 0 && speed <= 65535) {
if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
speed, speed, speed))
return -EIO;
} else
return -EINVAL;
- }
+ break;
+ default:
+ return -ENXIO;
+ }
return 0;
}
+static int fan_write_cmd_level(const char *cmd, int *rc)
+{
+ int level;
+
+ if (strlencmp(cmd, "level auto") == 0)
+ level = IBMACPI_FAN_EC_AUTO;
+ else if (strlencmp(cmd, "level disengaged") == 0)
+ level = IBMACPI_FAN_EC_DISENGAGED;
+ else if (sscanf(cmd, "level %d", &level) != 1)
+ return 0;
+
+ if ((*rc = fan_set_level(level)) == -ENXIO)
+ printk(IBM_ERR "level command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_enable(const char *cmd, int *rc)
+{
+ if (strlencmp(cmd, "enable") != 0)
+ return 0;
+
+ if ((*rc = fan_set_enable()) == -ENXIO)
+ printk(IBM_ERR "enable command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_disable(const char *cmd, int *rc)
+{
+ if (strlencmp(cmd, "disable") != 0)
+ return 0;
+
+ if ((*rc = fan_set_disable()) == -ENXIO)
+ printk(IBM_ERR "disable command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_speed(const char *cmd, int *rc)
+{
+ int speed;
+
+ /* TODO:
+ * Support speed <low> <medium> <high> ? */
+
+ if (sscanf(cmd, "speed %d", &speed) != 1)
+ return 0;
+
+ if ((*rc = fan_set_speed(speed)) == -ENXIO)
+ printk(IBM_ERR "speed command accepted for unsupported "
+ "access mode %d", fan_control_access_mode);
+
+ return 1;
+}
+
+static int fan_write_cmd_watchdog(const char *cmd, int *rc)
+{
+ int interval;
+
+ if (sscanf(cmd, "watchdog %d", &interval) != 1)
+ return 0;
+
+ if (interval < 0 || interval > 120)
+ *rc = -EINVAL;
+ else
+ fan_watchdog_maxinterval = interval;
+
+ return 1;
+}
+
+static int fan_write(char *buf)
+{
+ char *cmd;
+ int rc = 0;
+
+ while (!rc && (cmd = next_cmd(&buf))) {
+ if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) &&
+ fan_write_cmd_level(cmd, &rc)) &&
+ !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) &&
+ (fan_write_cmd_enable(cmd, &rc) ||
+ fan_write_cmd_disable(cmd, &rc) ||
+ fan_write_cmd_watchdog(cmd, &rc))) &&
+ !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) &&
+ fan_write_cmd_speed(cmd, &rc))
+ )
+ rc = -EINVAL;
+ else if (!rc)
+ fan_watchdog_reset();
+ }
+
+ return rc;
+}
+
+static void fan_watchdog_fire(struct work_struct *ignored)
+{
+ printk(IBM_NOTICE "fan watchdog: enabling fan\n");
+ if (fan_set_enable()) {
+ printk(IBM_ERR "fan watchdog: error while enabling fan\n");
+ /* reschedule for later */
+ fan_watchdog_reset();
+ }
+}
+
static struct ibm_struct ibms[] = {
{
.name = "driver",
.type = ACPI_SYSTEM_NOTIFY,
},
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
{
.name = "bay",
.init = bay_init,
.handle = &bay_handle,
.type = ACPI_SYSTEM_NOTIFY,
},
+#endif
{
.name = "cmos",
.read = cmos_read,
.name = "brightness",
.read = brightness_read,
.write = brightness_write,
+ .init = brightness_init,
+ .exit = brightness_exit,
},
{
.name = "volume",
.name = "fan",
.read = fan_read,
.write = fan_write,
+ .init = fan_init,
+ .exit = fan_exit,
.experimental = 1,
},
};
static int dispatch_read(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
- struct ibm_struct *ibm = (struct ibm_struct *)data;
+ struct ibm_struct *ibm = data;
int len;
if (!ibm || !ibm->read)
static int dispatch_write(struct file *file, const char __user * userbuf,
unsigned long count, void *data)
{
- struct ibm_struct *ibm = (struct ibm_struct *)data;
+ struct ibm_struct *ibm = data;
char *kernbuf;
int ret;
static void dispatch_notify(acpi_handle handle, u32 event, void *data)
{
- struct ibm_struct *ibm = (struct ibm_struct *)data;
+ struct ibm_struct *ibm = data;
if (!ibm || !ibm->notify)
return;
ibm->name, status);
return -ENODEV;
}
-
+ ibm->notify_installed = 1;
return 0;
}
}
memset(ibm->driver, 0, sizeof(struct acpi_driver));
- sprintf(ibm->driver->name, "%s/%s", IBM_NAME, ibm->name);
+ sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name);
ibm->driver->ids = ibm->hid;
ibm->driver->ops.add = &ibm_device_add;
ret = setup_notify(ibm);
if (ret < 0)
return ret;
- ibm->notify_installed = 1;
}
return 0;
#ifdef CONFIG_ACPI_IBM_DOCK
IBM_PARAM(dock);
#endif
+#ifdef CONFIG_ACPI_IBM_BAY
IBM_PARAM(bay);
+#endif
IBM_PARAM(cmos);
IBM_PARAM(led);
IBM_PARAM(beep);
ibm_exit(&ibms[i]);
remove_proc_entry(IBM_DIR, acpi_root_dir);
+
+ if (ibm_thinkpad_ec_found)
+ kfree(ibm_thinkpad_ec_found);
+}
+
+static char* __init check_dmi_for_ec(void)
+{
+ struct dmi_device *dev = NULL;
+ char ec_fw_string[18];
+
+ /*
+ * ThinkPad T23 or newer, A31 or newer, R50e or newer,
+ * X32 or newer, all Z series; Some models must have an
+ * up-to-date BIOS or they will not be detected.
+ *
+ * See http://thinkwiki.org/wiki/List_of_DMI_IDs
+ */
+ while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
+ if (sscanf(dev->name,
+ "IBM ThinkPad Embedded Controller -[%17c",
+ ec_fw_string) == 1) {
+ ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
+ ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
+ return kstrdup(ec_fw_string, GFP_KERNEL);
+ }
+ }
+ return NULL;
}
static int __init acpi_ibm_init(void)
return -ENODEV;
}
+ /* Models with newer firmware report the EC in DMI */
+ ibm_thinkpad_ec_found = check_dmi_for_ec();
+ if (ibm_thinkpad_ec_found)
+ printk(IBM_INFO "ThinkPad EC firmware %s\n",
+ ibm_thinkpad_ec_found);
+
/* these handles are not required */
IBM_HANDLE_INIT(vid);
IBM_HANDLE_INIT(vid2);
IBM_HANDLE_INIT(dock);
#endif
IBM_HANDLE_INIT(pci);
+#ifdef CONFIG_ACPI_IBM_BAY
IBM_HANDLE_INIT(bay);
if (bay_handle)
IBM_HANDLE_INIT(bay_ej);
IBM_HANDLE_INIT(bay2);
if (bay2_handle)
IBM_HANDLE_INIT(bay2_ej);
+#endif
IBM_HANDLE_INIT(beep);
IBM_HANDLE_INIT(ecrd);
IBM_HANDLE_INIT(ecwr);
handle = phandle;
status = acpi_evaluate_integer(handle, "_PXM", NULL, &pxm);
if (ACPI_SUCCESS(status))
- return (int)pxm;
+ return pxm;
status = acpi_get_parent(handle, &phandle);
} while (ACPI_SUCCESS(status));
return -1;
static void acpi_os_execute_deferred(struct work_struct *work)
{
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
+
if (!dpc) {
printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
return;
acpi_status acpi_os_purge_cache(acpi_cache_t * cache)
{
- (void)kmem_cache_shrink(cache);
+ kmem_cache_shrink(cache);
return (AE_OK);
}
if (!device || !device->parent)
return -EINVAL;
- pathname = (char *)kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
+ pathname = kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
if (!pathname)
return -ENOMEM;
memset(pathname, 0, ACPI_PATHNAME_MAX);
struct acpi_buffer buffer = { 0, NULL };
- pathname = (char *)kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
+ pathname = kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
if (!pathname)
return -ENOMEM;
memset(pathname, 0, ACPI_PATHNAME_MAX);
static int first_time = 1;
- pathname = (char *)kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
+ pathname = kmalloc(ACPI_PATHNAME_MAX, GFP_KERNEL);
if (!pathname)
return -ENOMEM;
memset(pathname, 0, ACPI_PATHNAME_MAX);
static acpi_status
acpi_pci_link_check_possible(struct acpi_resource *resource, void *context)
{
- struct acpi_pci_link *link = (struct acpi_pci_link *)context;
+ struct acpi_pci_link *link = context;
u32 i = 0;
return -1;
}
- link = (struct acpi_pci_link *)acpi_driver_data(device);
+ link = acpi_driver_data(device);
if (!link) {
printk(KERN_ERR PREFIX "Invalid link context\n");
return -1;
return -1;
}
- link = (struct acpi_pci_link *)acpi_driver_data(device);
+ link = acpi_driver_data(device);
if (!link) {
printk(KERN_ERR PREFIX "Invalid link context\n");
return -1;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- link = (struct acpi_pci_link *)acpi_driver_data(device);
+ link = acpi_driver_data(device);
mutex_lock(&acpi_link_lock);
list_del(&link->node);
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
- int *busnr = (int *)data;
+ int *busnr = data;
struct acpi_resource_address64 address;
if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
if (!device || !acpi_driver_data(device))
return -EINVAL;
- root = (struct acpi_pci_root *)acpi_driver_data(device);
+ root = acpi_driver_data(device);
kfree(root);
return result;
}
- *resource = (struct acpi_power_resource *)acpi_driver_data(device);
+ *resource = acpi_driver_data(device);
if (!resource)
return -ENODEV;
struct acpi_power_resource *resource = NULL;
- resource = (struct acpi_power_resource *)seq->private;
+ resource = seq->private;
if (!resource)
goto end;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- resource = (struct acpi_power_resource *)acpi_driver_data(device);
+ resource = acpi_driver_data(device);
acpi_power_remove_fs(device);
static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
+ struct acpi_processor *pr = seq->private;
if (!pr)
* Don't trust it blindly
*/
if (processor_device_array[pr->id] != NULL &&
- processor_device_array[pr->id] != (void *)device) {
+ processor_device_array[pr->id] != device) {
printk(KERN_WARNING "BIOS reported wrong ACPI id"
"for the processor\n");
return -ENODEV;
}
- processor_device_array[pr->id] = (void *)device;
+ processor_device_array[pr->id] = device;
processors[pr->id] = pr;
static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_processor *pr = (struct acpi_processor *)data;
+ struct acpi_processor *pr = data;
struct acpi_device *device = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- pr = (struct acpi_processor *)acpi_driver_data(device);
+ pr = acpi_driver_data(device);
if (pr->id >= NR_CPUS) {
kfree(pr);
return -ENODEV;
}
- cst = (union acpi_object *)buffer.pointer;
+ cst = buffer.pointer;
/* There must be at least 2 elements */
if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
memset(&cx, 0, sizeof(cx));
- element = (union acpi_object *)&(cst->package.elements[i]);
+ element = &(cst->package.elements[i]);
if (element->type != ACPI_TYPE_PACKAGE)
continue;
if (element->package.count != 4)
continue;
- obj = (union acpi_object *)&(element->package.elements[0]);
+ obj = &(element->package.elements[0]);
if (obj->type != ACPI_TYPE_BUFFER)
continue;
continue;
/* There should be an easy way to extract an integer... */
- obj = (union acpi_object *)&(element->package.elements[1]);
+ obj = &(element->package.elements[1]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
}
}
- obj = (union acpi_object *)&(element->package.elements[2]);
+ obj = &(element->package.elements[2]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
cx.latency = obj->integer.value;
- obj = (union acpi_object *)&(element->package.elements[3]);
+ obj = &(element->package.elements[3]);
if (obj->type != ACPI_TYPE_INTEGER)
continue;
static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
+ struct acpi_processor *pr = seq->private;
unsigned int i;
return -ENODEV;
}
- pss = (union acpi_object *)buffer.pointer;
+ pss = buffer.pointer;
if (!pss || (pss->type != ACPI_TYPE_PACKAGE)) {
printk(KERN_ERR PREFIX "Invalid _PSS data\n");
result = -EFAULT;
static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
+ struct acpi_processor *pr = seq->private;
int i;
size_t count, loff_t * data)
{
int result = 0;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_processor *pr = (struct acpi_processor *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_processor *pr = m->private;
struct acpi_processor_performance *perf;
char state_string[12] = { '\0' };
unsigned int new_state = 0;
return -ENODEV;
}
- psd = (union acpi_object *) buffer.pointer;
+ psd = buffer.pointer;
if (!psd || (psd->type != ACPI_TYPE_PACKAGE)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid _PSD data\n"));
result = -EFAULT;
if (result)
return result;
- pr = (struct acpi_processor *)acpi_driver_data(device);
+ pr = acpi_driver_data(device);
if (!pr)
return -ENODEV;
size_t count, loff_t * data)
{
int result = 0;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_processor *pr = (struct acpi_processor *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_processor *pr = m->private;
char limit_string[25] = { '\0' };
int px = 0;
int tx = 0;
static int acpi_processor_throttling_seq_show(struct seq_file *seq,
void *offset)
{
- struct acpi_processor *pr = (struct acpi_processor *)seq->private;
+ struct acpi_processor *pr = seq->private;
int i = 0;
int result = 0;
size_t count, loff_t * data)
{
int result = 0;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_processor *pr = (struct acpi_processor *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_processor *pr = m->private;
char state_string[12] = { '\0' };
static int acpi_battery_read_info(struct seq_file *seq, void *offset)
{
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
int cscale;
int result = 0;
static int acpi_battery_read_alarm(struct seq_file *seq, void *offset)
{
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct acpi_battery *battery = seq->private;
int result = 0;
int cscale;
acpi_battery_write_alarm(struct file *file, const char __user * buffer,
size_t count, loff_t * ppos)
{
- struct seq_file *seq = (struct seq_file *)file->private_data;
- struct acpi_battery *battery = (struct acpi_battery *)seq->private;
+ struct seq_file *seq = file->private_data;
+ struct acpi_battery *battery = seq->private;
char alarm_string[12] = { '\0' };
int result, old_alarm, new_alarm;
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"acpi_battery_set_alarm() failed\n"));
- (void)acpi_battery_set_alarm(battery, old_alarm);
+ acpi_battery_set_alarm(battery, old_alarm);
goto end;
}
result = acpi_battery_get_alarm(battery);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"acpi_battery_get_alarm() failed\n"));
- (void)acpi_battery_set_alarm(battery, old_alarm);
+ acpi_battery_set_alarm(battery, old_alarm);
goto end;
}
static int acpi_ac_read_state(struct seq_file *seq, void *offset)
{
- struct acpi_sbs *sbs = (struct acpi_sbs *)seq->private;
+ struct acpi_sbs *sbs = seq->private;
int result;
if (sbs->zombie) {
battery->init_state = 1;
}
- (void)sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
+ sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
result = acpi_sbs_generic_add_fs(&battery->battery_entry,
acpi_battery_dir,
}
if (old_battery_present != new_battery_present) {
- (void)sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
+ sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
result = acpi_sbs_generate_event(sbs->device,
ACPI_SBS_BATTERY_NOTIFY_STATUS,
new_battery_present,
}
}
if (old_remaining_capacity != battery->state.remaining_capacity) {
- (void)sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
+ sprintf(dir_name, ACPI_BATTERY_DIR_NAME, id);
result = acpi_sbs_generate_event(sbs->device,
ACPI_SBS_BATTERY_NOTIFY_STATUS,
new_battery_present,
init_timer(&sbs->update_timer);
if (update_mode == QUEUE_UPDATE_MODE) {
status = acpi_os_execute(OSL_GPE_HANDLER,
- acpi_sbs_update_queue, (void *)sbs);
+ acpi_sbs_update_queue, sbs);
if (status != AE_OK) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"acpi_os_execute() failed\n"));
int acpi_sbs_remove(struct acpi_device *device, int type)
{
- struct acpi_sbs *sbs = NULL;
+ struct acpi_sbs *sbs;
int id;
if (!device) {
#endif
/*
- * Disable all wakeup GPEs before power off.
- *
+ * Disable all wakeup GPEs before entering requested sleep state.
+ * @sleep_state: ACPI state
* Since acpi_enter_sleep_state() will disable all
* RUNTIME GPEs, we simply mark all GPES that
- * are not enabled for wakeup from S5 as RUNTIME.
+ * are not enabled for wakeup from requested state as RUNTIME.
*/
void acpi_gpe_sleep_prepare(u32 sleep_state)
{
static int
acpi_table_compute_checksum(void *table_pointer, unsigned long length)
{
- u8 *p = (u8 *) table_pointer;
+ u8 *p = table_pointer;
unsigned long remains = length;
unsigned long sum = 0;
static void acpi_thermal_check(void *data)
{
int result = 0;
- struct acpi_thermal *tz = (struct acpi_thermal *)data;
+ struct acpi_thermal *tz = data;
unsigned long sleep_time = 0;
int i = 0;
struct acpi_thermal_state state;
static int acpi_thermal_state_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
if (!tz)
static int acpi_thermal_temp_seq_show(struct seq_file *seq, void *offset)
{
int result = 0;
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
if (!tz)
static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
int i = 0;
int j = 0;
const char __user * buffer,
size_t count, loff_t * ppos)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_thermal *tz = (struct acpi_thermal *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_thermal *tz = m->private;
char *limit_string;
int num, critical, hot, passive;
static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
if (!tz)
const char __user * buffer,
size_t count, loff_t * ppos)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_thermal *tz = (struct acpi_thermal *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_thermal *tz = m->private;
int result = 0;
char mode_string[12] = { '\0' };
static int acpi_thermal_polling_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)seq->private;
+ struct acpi_thermal *tz = seq->private;
if (!tz)
const char __user * buffer,
size_t count, loff_t * ppos)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_thermal *tz = (struct acpi_thermal *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_thermal *tz = m->private;
int result = 0;
char polling_string[12] = { '\0' };
int seconds = 0;
static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_thermal *tz = (struct acpi_thermal *)data;
+ struct acpi_thermal *tz = data;
struct acpi_device *device = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- tz = (struct acpi_thermal *)acpi_driver_data(device);
+ tz = acpi_driver_data(device);
/* avoid timer adding new defer task */
tz->zombie = 1;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- tz = (struct acpi_thermal *)acpi_driver_data(device);
+ tz = acpi_driver_data(device);
acpi_thermal_get_temperature(tz);
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
+#include <linux/backlight.h>
+
#include <asm/uaccess.h>
#include <acpi/acpi_drivers.h>
}
static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
+static struct backlight_device *toshiba_backlight_device;
static int force_fan;
static int last_key_event;
static int key_event_valid;
return result;
}
-static char *read_lcd(char *p)
+static int get_lcd(struct backlight_device *bd)
{
u32 hci_result;
u32 value;
hci_read1(HCI_LCD_BRIGHTNESS, &value, &hci_result);
if (hci_result == HCI_SUCCESS) {
- value = value >> HCI_LCD_BRIGHTNESS_SHIFT;
+ return (value >> HCI_LCD_BRIGHTNESS_SHIFT);
+ } else
+ return -EFAULT;
+}
+
+static char *read_lcd(char *p)
+{
+ int value = get_lcd(NULL);
+
+ if (value >= 0) {
p += sprintf(p, "brightness: %d\n", value);
p += sprintf(p, "brightness_levels: %d\n",
HCI_LCD_BRIGHTNESS_LEVELS);
return p;
}
+static int set_lcd(int value)
+{
+ u32 hci_result;
+
+ value = value << HCI_LCD_BRIGHTNESS_SHIFT;
+ hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result);
+ if (hci_result != HCI_SUCCESS)
+ return -EFAULT;
+
+ return 0;
+}
+
+static int set_lcd_status(struct backlight_device *bd)
+{
+ return set_lcd(bd->props->brightness);
+}
+
static unsigned long write_lcd(const char *buffer, unsigned long count)
{
int value;
- u32 hci_result;
+ int ret = count;
if (sscanf(buffer, " brightness : %i", &value) == 1 &&
- value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) {
- value = value << HCI_LCD_BRIGHTNESS_SHIFT;
- hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result);
- if (hci_result != HCI_SUCCESS)
- return -EFAULT;
- } else {
- return -EINVAL;
- }
-
- return count;
+ value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS)
+ ret = set_lcd(value);
+ else
+ ret = -EINVAL;
+ return ret;
}
static char *read_video(char *p)
return AE_OK;
}
+static struct backlight_properties toshiba_backlight_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = get_lcd,
+ .update_status = set_lcd_status,
+ .max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1,
+};
+
+static void __exit toshiba_acpi_exit(void)
+{
+ if (toshiba_backlight_device)
+ backlight_device_unregister(toshiba_backlight_device);
+
+ remove_device();
+
+ if (toshiba_proc_dir)
+ remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
+
+ return;
+}
+
static int __init toshiba_acpi_init(void)
{
acpi_status status = AE_OK;
remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
}
- return (ACPI_SUCCESS(status)) ? 0 : -ENODEV;
-}
-
-static void __exit toshiba_acpi_exit(void)
-{
- remove_device();
-
- if (toshiba_proc_dir)
- remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
+ toshiba_backlight_device = backlight_device_register("toshiba",NULL,
+ NULL,
+ &toshiba_backlight_data);
+ if (IS_ERR(toshiba_backlight_device)) {
+ printk(KERN_ERR "Could not register toshiba backlight device\n");
+ toshiba_backlight_device = NULL;
+ toshiba_acpi_exit();
+ }
- return;
+ return (ACPI_SUCCESS(status)) ? 0 : -ENODEV;
}
module_init(toshiba_acpi_init);
if (thread_id != acpi_gbl_prev_thread_id) {
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf
- ("\n**** Context Switch from TID %X to TID %X ****\n\n",
- (u32) acpi_gbl_prev_thread_id, (u32) thread_id);
+ ("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
+ (unsigned long) acpi_gbl_prev_thread_id,
+ (unsigned long) thread_id);
}
acpi_gbl_prev_thread_id = thread_id;
#endif
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Thread %X attempting to acquire Mutex [%s]\n",
- (u32) this_thread_id, acpi_ut_get_mutex_name(mutex_id)));
+ "Thread %lX attempting to acquire Mutex [%s]\n",
+ (unsigned long) this_thread_id,
+ acpi_ut_get_mutex_name(mutex_id)));
status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
ACPI_WAIT_FOREVER);
if (ACPI_SUCCESS(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Thread %X acquired Mutex [%s]\n",
- (u32) this_thread_id,
+ "Thread %lX acquired Mutex [%s]\n",
+ (unsigned long) this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
acpi_gbl_mutex_info[mutex_id].use_count++;
acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id;
} else {
ACPI_EXCEPTION((AE_INFO, status,
- "Thread %X could not acquire Mutex [%X]",
- (u32) this_thread_id, mutex_id));
+ "Thread %lX could not acquire Mutex [%X]",
+ (unsigned long) this_thread_id, mutex_id));
}
return (status);
this_thread_id = acpi_os_get_thread_id();
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Thread %X releasing Mutex [%s]\n", (u32) this_thread_id,
+ "Thread %lX releasing Mutex [%s]\n",
+ (unsigned long) this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
if (mutex_id > ACPI_MAX_MUTEX) {
return AE_BAD_DATA;
}
- format_string = (char *)format->pointer;
+ format_string = format->pointer;
/*
* Calculate size_required.
if (ACPI_FAILURE(status))
goto end;
- package = (union acpi_object *)buffer.pointer;
+ package = buffer.pointer;
if ((buffer.length == 0) || !package) {
printk(KERN_ERR PREFIX "No return object (len %X ptr %p)\n",
*
* Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
* Copyright (C) 2004 Bruno Ducrot <ducrot@poupinou.org>
+ * Copyright (C) 2006 Thomas Tuttle <linux-kernel@ttuttle.net>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
#define ACPI_VIDEO_NOTIFY_NEXT_OUTPUT 0x83
#define ACPI_VIDEO_NOTIFY_PREV_OUTPUT 0x84
-#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS 0x82
-#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x83
-#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x84
-#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS 0x85
-#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF 0x86
+#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS 0x85
+#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x86
+#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x87
+#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS 0x88
+#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF 0x89
#define ACPI_VIDEO_HEAD_INVALID (~0u - 1)
#define ACPI_VIDEO_HEAD_END (~0u)
if (ACPI_FAILURE(status))
return -ENODEV;
- obj = (union acpi_object *)buffer.pointer;
+ obj = buffer.pointer;
if (obj && obj->type == ACPI_TYPE_BUFFER)
*edid = obj;
static int acpi_video_device_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_device *dev =
- (struct acpi_video_device *)seq->private;
+ struct acpi_video_device *dev = seq->private;
if (!dev)
static int acpi_video_device_state_seq_show(struct seq_file *seq, void *offset)
{
int status;
- struct acpi_video_device *dev =
- (struct acpi_video_device *)seq->private;
+ struct acpi_video_device *dev = seq->private;
unsigned long state;
size_t count, loff_t * data)
{
int status;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_video_device *dev = (struct acpi_video_device *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_video_device *dev = m->private;
char str[12] = { 0 };
u32 state = 0;
static int
acpi_video_device_brightness_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_device *dev =
- (struct acpi_video_device *)seq->private;
+ struct acpi_video_device *dev = seq->private;
int i;
const char __user * buffer,
size_t count, loff_t * data)
{
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_video_device *dev = (struct acpi_video_device *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_video_device *dev = m->private;
char str[4] = { 0 };
unsigned int level = 0;
int i;
static int acpi_video_device_EDID_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_device *dev =
- (struct acpi_video_device *)seq->private;
+ struct acpi_video_device *dev = seq->private;
int status;
int i;
union acpi_object *edid = NULL;
if (!device)
return -ENODEV;
- vid_dev = (struct acpi_video_device *)acpi_driver_data(device);
+ vid_dev = acpi_driver_data(device);
if (!vid_dev)
return -ENODEV;
{
struct acpi_video_device *vid_dev;
- vid_dev = (struct acpi_video_device *)acpi_driver_data(device);
+ vid_dev = acpi_driver_data(device);
if (!vid_dev || !vid_dev->video || !vid_dev->video->dir)
return -ENODEV;
/* video bus */
static int acpi_video_bus_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
if (!video)
static int acpi_video_bus_ROM_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
if (!video)
static int acpi_video_bus_POST_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
unsigned long options;
int status;
static int acpi_video_bus_POST_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
int status;
unsigned long id;
static int acpi_video_bus_DOS_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)seq->private;
+ struct acpi_video_bus *video = seq->private;
seq_printf(seq, "DOS setting: <%d>\n", video->dos_setting);
size_t count, loff_t * data)
{
int status;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_video_bus *video = (struct acpi_video_bus *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_video_bus *video = m->private;
char str[12] = { 0 };
unsigned long opt, options;
size_t count, loff_t * data)
{
int status;
- struct seq_file *m = (struct seq_file *)file->private_data;
- struct acpi_video_bus *video = (struct acpi_video_bus *)m->private;
+ struct seq_file *m = file->private_data;
+ struct acpi_video_bus *video = m->private;
char str[12] = { 0 };
unsigned long opt;
struct acpi_video_bus *video;
- video = (struct acpi_video_bus *)acpi_driver_data(device);
+ video = acpi_driver_data(device);
if (!acpi_device_dir(device)) {
acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
struct acpi_video_bus *video;
- video = (struct acpi_video_bus *)acpi_driver_data(device);
+ video = acpi_driver_data(device);
if (acpi_device_dir(device)) {
remove_proc_entry("info", acpi_device_dir(device));
return status;
}
- dod = (union acpi_object *)buffer.pointer;
+ dod = buffer.pointer;
if (!dod || (dod->type != ACPI_TYPE_PACKAGE)) {
ACPI_EXCEPTION((AE_INFO, status, "Invalid _DOD data"));
status = -EFAULT;
count = 0;
for (i = 0; i < dod->package.count; i++) {
- obj = (union acpi_object *)&dod->package.elements[i];
+ obj = &dod->package.elements[i];
if (obj->type != ACPI_TYPE_INTEGER) {
printk(KERN_ERR PREFIX "Invalid _DOD data\n");
acpi_video_get_next_level(struct acpi_video_device *device,
u32 level_current, u32 event)
{
- /*Fix me */
- return level_current;
+ int min, max, min_above, max_below, i, l;
+ max = max_below = 0;
+ min = min_above = 255;
+ for (i = 0; i < device->brightness->count; i++) {
+ l = device->brightness->levels[i];
+ if (l < min)
+ min = l;
+ if (l > max)
+ max = l;
+ if (l < min_above && l > level_current)
+ min_above = l;
+ if (l > max_below && l < level_current)
+ max_below = l;
+ }
+
+ switch (event) {
+ case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS:
+ return (level_current < max) ? min_above : min;
+ case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS:
+ return (level_current < max) ? min_above : max;
+ case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS:
+ return (level_current > min) ? max_below : min;
+ case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS:
+ case ACPI_VIDEO_NOTIFY_DISPLAY_OFF:
+ return 0;
+ default:
+ return level_current;
+ }
}
static void
static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_video_bus *video = (struct acpi_video_bus *)data;
+ struct acpi_video_bus *video = data;
struct acpi_device *device = NULL;
printk("video bus notify\n");
static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_video_device *video_device =
- (struct acpi_video_device *)data;
+ struct acpi_video_device *video_device = data;
struct acpi_device *device = NULL;
if (!device || !acpi_driver_data(device))
return -EINVAL;
- video = (struct acpi_video_bus *)acpi_driver_data(device);
+ video = acpi_driver_data(device);
acpi_video_bus_stop_devices(video);
return rc;
adma_enter_reg_mode(ap);
rc = -ENOMEM;
- pp = kcalloc(1, sizeof(*pp), GFP_KERNEL);
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
goto err_out;
pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma,
if (rc)
goto err_out_iounmap;
- probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL) {
rc = -ENOMEM;
goto err_out_iounmap;
fore200e_mkfirm
fore200e_pca_fw.c
pca200e.bin
-
+pca200e_ecd.bin2
config ATM_AMBASSADOR
tristate "Madge Ambassador (Collage PCI 155 Server)"
depends on PCI && ATM
+ select BITREVERSE
help
This is a driver for ATMizer based ATM card produced by Madge
Networks Ltd. Say Y (or M to compile as a module named ambassador)
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/poison.h>
+#include <linux/bitrev.h>
#include <asm/atomic.h>
#include <asm/io.h>
PRINTK (KERN_INFO, "microcode version is %u.%u", major, minor);
}
-// swap bits within byte to get Ethernet ordering
-static u8 bit_swap (u8 byte)
-{
- const u8 swap[] = {
- 0x0, 0x8, 0x4, 0xc,
- 0x2, 0xa, 0x6, 0xe,
- 0x1, 0x9, 0x5, 0xd,
- 0x3, 0xb, 0x7, 0xf
- };
- return ((swap[byte & 0xf]<<4) | swap[byte>>4]);
-}
-
// get end station address
static void __devinit amb_esi (amb_dev * dev, u8 * esi) {
u32 lower4;
PRINTDB (DBG_INIT, "ESI:");
for (i = 0; i < ESI_LEN; ++i) {
if (i < 4)
- esi[i] = bit_swap (lower4>>(8*i));
+ esi[i] = bitrev8(lower4>>(8*i));
else
- esi[i] = bit_swap (upper2>>(8*(i-4)));
+ esi[i] = bitrev8(upper2>>(8*(i-4)));
PRINTDM (DBG_INIT, " %02x", esi[i]);
}
/* initialize memory management */
buffer_mem = eni_dev->mem - (buf - eni_dev->ram);
eni_dev->free_list_size = buffer_mem/MID_MIN_BUF_SIZE/2;
- eni_dev->free_list = (struct eni_free *) kmalloc(
+ eni_dev->free_list = kmalloc(
sizeof(struct eni_free)*(eni_dev->free_list_size+1),GFP_KERNEL);
if (!eni_dev->free_list) {
printk(KERN_ERR DEV_LABEL "(itf %d): couldn't get free page\n",
goto out0;
}
- eni_dev = (struct eni_dev *) kmalloc(sizeof(struct eni_dev),GFP_KERNEL);
+ eni_dev = kmalloc(sizeof(struct eni_dev),GFP_KERNEL);
if (!eni_dev) goto out0;
if (!cpu_zeroes) {
cpu_zeroes = pci_alloc_consistent(pci_dev,ENI_ZEROES_SIZE,
cid = he_mkcid(he_dev, vpi, vci);
- he_vcc = (struct he_vcc *) kmalloc(sizeof(struct he_vcc), GFP_ATOMIC);
+ he_vcc = kmalloc(sizeof(struct he_vcc), GFP_ATOMIC);
if (he_vcc == NULL) {
hprintk("unable to allocate he_vcc during open\n");
return -ENOMEM;
struct atm_dev *atmdev;
int result;
- lanai = (struct lanai_dev *) kmalloc(sizeof(*lanai), GFP_KERNEL);
+ lanai = kmalloc(sizeof(*lanai), GFP_KERNEL);
if (lanai == NULL) {
printk(KERN_ERR DEV_LABEL
": couldn't allocate dev_data structure!\n");
if (size != VBR_SCQSIZE && size != CBR_SCQSIZE)
return NULL;
- scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL);
+ scq = kmalloc(sizeof(scq_info), GFP_KERNEL);
if (scq == NULL)
return NULL;
scq->org = kmalloc(2 * size, GFP_KERNEL);
kfree(scq);
return NULL;
}
- scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) *
+ scq->skb = kmalloc(sizeof(struct sk_buff *) *
(size / NS_SCQE_SIZE), GFP_KERNEL);
if (scq->skb == NULL)
{
DPRINTK("start_tx\n");
zatm_dev = ZATM_DEV(dev);
- zatm_dev->tx_map = (struct atm_vcc **) kmalloc(sizeof(struct atm_vcc *)*
+ zatm_dev->tx_map = kmalloc(sizeof(struct atm_vcc *)*
zatm_dev->chans,GFP_KERNEL);
if (!zatm_dev->tx_map) return -ENOMEM;
zatm_dev->tx_bw = ATM_OC3_PCR;
struct zatm_dev *zatm_dev;
int ret = -ENOMEM;
- zatm_dev = (struct zatm_dev *) kmalloc(sizeof(*zatm_dev), GFP_KERNEL);
+ zatm_dev = kmalloc(sizeof(*zatm_dev), GFP_KERNEL);
if (!zatm_dev) {
printk(KERN_EMERG "%s: memory shortage\n", DEV_LABEL);
goto out;
void class_unregister(struct class * cls)
{
pr_debug("device class '%s': unregistering\n", cls->name);
+ if (cls->virtual_dir)
+ kobject_unregister(cls->virtual_dir);
remove_class_attrs(cls);
subsystem_unregister(&cls->subsys);
}
mapsize = (mapsize + BITS_PER_LONG - 1) / BITS_PER_LONG;
mapsize *= sizeof (long);
- page = (struct dma_page *) kmalloc (mapsize + sizeof *page, mem_flags);
+ page = kmalloc(mapsize + sizeof *page, mem_flags);
if (!page)
return NULL;
page->vaddr = dma_alloc_coherent (pool->dev,
* pointer. The memory associated with the platform data will be freed
* when the platform device is released.
*/
-int platform_device_add_data(struct platform_device *pdev, void *data, size_t size)
+int platform_device_add_data(struct platform_device *pdev, const void *data, size_t size)
{
void *d;
* Returns zero if the driver registered and bound to a device, else returns
* a negative error code and with the driver not registered.
*/
-int platform_driver_probe(struct platform_driver *drv,
+int __init_or_module platform_driver_probe(struct platform_driver *drv,
int (*probe)(struct platform_device *))
{
int retval, code;
tristate "Atari floppy support"
depends on ATARI
-config BLK_DEV_SWIM_IOP
- bool "Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)"
- depends on MAC && EXPERIMENTAL && BROKEN
- help
- Say Y here to support the SWIM (Super Woz Integrated Machine) IOP
- floppy controller on the Macintosh IIfx and Quadra 900/950.
-
config MAC_FLOPPY
tristate "Support for PowerMac floppy"
depends on PPC_PMAC && !PPC_PMAC64
tristate "Packet writing on CD/DVD media"
depends on !UML
help
- If you have a CDROM drive that supports packet writing, say Y to
- include preliminary support. It should work with any MMC/Mt Fuji
- compliant ATAPI or SCSI drive, which is just about any newer CD
- writer.
+ If you have a CDROM/DVD drive that supports packet writing, say
+ Y to include support. It should work with any MMC/Mt Fuji
+ compliant ATAPI or SCSI drive, which is just about any newer
+ DVD/CD writer.
- Currently only writing to CD-RW, DVD-RW and DVD+RW discs is possible.
+ Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs
+ is possible.
DVD-RW disks must be in restricted overwrite mode.
+ See the file <file:Documentation/cdrom/packet-writing.txt>
+ for further information on the use of this driver.
+
To compile this driver as a module, choose M here: the
module will be called pktcdvd.
obj-$(CONFIG_BLK_DEV_FD) += floppy.o
obj-$(CONFIG_AMIGA_FLOPPY) += amiflop.o
obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
-obj-$(CONFIG_BLK_DEV_SWIM_IOP) += swim_iop.o
obj-$(CONFIG_ATARI_ACSI) += acsi.o
obj-$(CONFIG_ATARI_SLM) += acsi_slm.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
loff_t *ppos )
{
- struct inode *node = file->f_dentry->d_inode;
+ struct inode *node = file->f_path.dentry->d_inode;
unsigned long page;
int length;
int end;
loff_t *ppos )
{
- struct inode *node = file->f_dentry->d_inode;
+ struct inode *node = file->f_path.dentry->d_inode;
int device = iminor(node);
int n, filled, w, h;
{
int ret;
lock_kernel();
- ret = cciss_ioctl(f->f_dentry->d_inode, f, cmd, arg);
+ ret = cciss_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
unlock_kernel();
return ret;
}
status = -ENOMEM;
goto cleanup1;
}
- buff_size = (int *)kmalloc(MAXSGENTRIES * sizeof(int),
+ buff_size = kmalloc(MAXSGENTRIES * sizeof(int),
GFP_KERNEL);
if (!buff_size) {
status = -ENOMEM;
if (err) {
printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
"aborting\n");
- goto err_out_disable_pdev;
+ return err;
}
subsystem_vendor_id = pdev->subsystem_vendor;
#ifdef CCISS_DEBUG
printk("address 0 = %x\n", c->paddr);
#endif /* CCISS_DEBUG */
- c->vaddr = remap_pci_mem(c->paddr, 200);
+ c->vaddr = remap_pci_mem(c->paddr, 0x250);
/* Wait for the board to become ready. (PCI hotplug needs this.)
* We poll for up to 120 secs, once per 100ms. */
}
return 0;
- err_out_free_res:
+err_out_free_res:
+ /*
+ * Deliberately omit pci_disable_device(): it does something nasty to
+ * Smart Array controllers that pci_enable_device does not undo
+ */
pci_release_regions(pdev);
-
- err_out_disable_pdev:
- pci_disable_device(pdev);
return err;
}
if (drv->queue)
blk_cleanup_queue(drv->queue);
}
+ /*
+ * Deliberately omit pci_disable_device(): it does something nasty to
+ * Smart Array controllers that pci_enable_device does not undo
+ */
pci_release_regions(pdev);
- pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
free_hba(i);
return -1;
#ifdef CONFIG_CISS_SCSI_TAPE
kfree(hba[i]->scsi_rejects.complete);
#endif
+ /*
+ * Deliberately omit pci_disable_device(): it does something nasty to
+ * Smart Array controllers that pci_enable_device does not undo
+ */
pci_release_regions(pdev);
- pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
free_hba(i);
}
" processing\n");
/* Command does not return anything, but idasend command needs a
buffer */
- id_ctlr_buf = (id_ctlr_t *)kmalloc(sizeof(id_ctlr_t), GFP_KERNEL);
+ id_ctlr_buf = kmalloc(sizeof(id_ctlr_t), GFP_KERNEL);
if(id_ctlr_buf==NULL)
{
printk(KERN_WARNING "cpqarray: Out of memory. "
info_p->log_drv_map = 0;
- id_ldrive = (id_log_drv_t *)kmalloc(sizeof(id_log_drv_t), GFP_KERNEL);
+ id_ldrive = kmalloc(sizeof(id_log_drv_t), GFP_KERNEL);
if(id_ldrive == NULL)
{
printk( KERN_ERR "cpqarray: out of memory.\n");
return;
}
- id_ctlr_buf = (id_ctlr_t *)kmalloc(sizeof(id_ctlr_t), GFP_KERNEL);
+ id_ctlr_buf = kmalloc(sizeof(id_ctlr_t), GFP_KERNEL);
if(id_ctlr_buf == NULL)
{
kfree(id_ldrive);
return;
}
- id_lstatus_buf = (sense_log_drv_stat_t *)kmalloc(sizeof(sense_log_drv_stat_t), GFP_KERNEL);
+ id_lstatus_buf = kmalloc(sizeof(sense_log_drv_stat_t), GFP_KERNEL);
if(id_lstatus_buf == NULL)
{
kfree(id_ctlr_buf);
return;
}
- sense_config_buf = (config_t *)kmalloc(sizeof(config_t), GFP_KERNEL);
+ sense_config_buf = kmalloc(sizeof(config_t), GFP_KERNEL);
if(sense_config_buf == NULL)
{
kfree(id_lstatus_buf);
if (lo->lo_state != Lo_bound)
return -ENXIO;
- error = vfs_getattr(file->f_vfsmnt, file->f_dentry, &stat);
+ error = vfs_getattr(file->f_path.mnt, file->f_path.dentry, &stat);
if (error)
return error;
memset(info, 0, sizeof(*info));
static long lo_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct loop_device *lo = inode->i_bdev->bd_disk->private_data;
int err;
error = -EINVAL;
file = fget(arg);
if (file) {
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if (S_ISSOCK(inode->i_mode)) {
lo->file = file;
lo->sock = SOCKET_I(inode);
/*
* Copyright (C) 2000 Jens Axboe <axboe@suse.de>
* Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com>
+ * Copyright (C) 2006 Thomas Maier <balagi@justmail.de>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/scsi.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
#include <asm/uaccess.h>
static struct pktcdvd_device *pkt_devs[MAX_WRITERS];
static struct proc_dir_entry *pkt_proc;
static int pktdev_major;
+static int write_congestion_on = PKT_WRITE_CONGESTION_ON;
+static int write_congestion_off = PKT_WRITE_CONGESTION_OFF;
static struct mutex ctl_mutex; /* Serialize open/close/setup/teardown */
static mempool_t *psd_pool;
+static struct class *class_pktcdvd = NULL; /* /sys/class/pktcdvd */
+static struct dentry *pkt_debugfs_root = NULL; /* /debug/pktcdvd */
+
+/* forward declaration */
+static int pkt_setup_dev(dev_t dev, dev_t* pkt_dev);
+static int pkt_remove_dev(dev_t pkt_dev);
+static int pkt_seq_show(struct seq_file *m, void *p);
+
+
+
+/*
+ * create and register a pktcdvd kernel object.
+ */
+static struct pktcdvd_kobj* pkt_kobj_create(struct pktcdvd_device *pd,
+ const char* name,
+ struct kobject* parent,
+ struct kobj_type* ktype)
+{
+ struct pktcdvd_kobj *p;
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return NULL;
+ kobject_set_name(&p->kobj, "%s", name);
+ p->kobj.parent = parent;
+ p->kobj.ktype = ktype;
+ p->pd = pd;
+ if (kobject_register(&p->kobj) != 0)
+ return NULL;
+ return p;
+}
+/*
+ * remove a pktcdvd kernel object.
+ */
+static void pkt_kobj_remove(struct pktcdvd_kobj *p)
+{
+ if (p)
+ kobject_unregister(&p->kobj);
+}
+/*
+ * default release function for pktcdvd kernel objects.
+ */
+static void pkt_kobj_release(struct kobject *kobj)
+{
+ kfree(to_pktcdvdkobj(kobj));
+}
+
+
+/**********************************************************
+ *
+ * sysfs interface for pktcdvd
+ * by (C) 2006 Thomas Maier <balagi@justmail.de>
+ *
+ **********************************************************/
+
+#define DEF_ATTR(_obj,_name,_mode) \
+ static struct attribute _obj = { \
+ .name = _name, .owner = THIS_MODULE, .mode = _mode }
+
+/**********************************************************
+ /sys/class/pktcdvd/pktcdvd[0-7]/
+ stat/reset
+ stat/packets_started
+ stat/packets_finished
+ stat/kb_written
+ stat/kb_read
+ stat/kb_read_gather
+ write_queue/size
+ write_queue/congestion_off
+ write_queue/congestion_on
+ **********************************************************/
+
+DEF_ATTR(kobj_pkt_attr_st1, "reset", 0200);
+DEF_ATTR(kobj_pkt_attr_st2, "packets_started", 0444);
+DEF_ATTR(kobj_pkt_attr_st3, "packets_finished", 0444);
+DEF_ATTR(kobj_pkt_attr_st4, "kb_written", 0444);
+DEF_ATTR(kobj_pkt_attr_st5, "kb_read", 0444);
+DEF_ATTR(kobj_pkt_attr_st6, "kb_read_gather", 0444);
+
+static struct attribute *kobj_pkt_attrs_stat[] = {
+ &kobj_pkt_attr_st1,
+ &kobj_pkt_attr_st2,
+ &kobj_pkt_attr_st3,
+ &kobj_pkt_attr_st4,
+ &kobj_pkt_attr_st5,
+ &kobj_pkt_attr_st6,
+ NULL
+};
+
+DEF_ATTR(kobj_pkt_attr_wq1, "size", 0444);
+DEF_ATTR(kobj_pkt_attr_wq2, "congestion_off", 0644);
+DEF_ATTR(kobj_pkt_attr_wq3, "congestion_on", 0644);
+
+static struct attribute *kobj_pkt_attrs_wqueue[] = {
+ &kobj_pkt_attr_wq1,
+ &kobj_pkt_attr_wq2,
+ &kobj_pkt_attr_wq3,
+ NULL
+};
+
+/* declares a char buffer[64] _dbuf, copies data from
+ * _b with length _l into it and ensures that _dbuf ends
+ * with a \0 character.
+ */
+#define DECLARE_BUF_AS_STRING(_dbuf, _b, _l) \
+ char _dbuf[64]; int dlen = (_l) < 0 ? 0 : (_l); \
+ if (dlen >= sizeof(_dbuf)) dlen = sizeof(_dbuf)-1; \
+ memcpy(_dbuf, _b, dlen); _dbuf[dlen] = 0
+
+static ssize_t kobj_pkt_show(struct kobject *kobj,
+ struct attribute *attr, char *data)
+{
+ struct pktcdvd_device *pd = to_pktcdvdkobj(kobj)->pd;
+ int n = 0;
+ int v;
+ if (strcmp(attr->name, "packets_started") == 0) {
+ n = sprintf(data, "%lu\n", pd->stats.pkt_started);
+
+ } else if (strcmp(attr->name, "packets_finished") == 0) {
+ n = sprintf(data, "%lu\n", pd->stats.pkt_ended);
+
+ } else if (strcmp(attr->name, "kb_written") == 0) {
+ n = sprintf(data, "%lu\n", pd->stats.secs_w >> 1);
+
+ } else if (strcmp(attr->name, "kb_read") == 0) {
+ n = sprintf(data, "%lu\n", pd->stats.secs_r >> 1);
+
+ } else if (strcmp(attr->name, "kb_read_gather") == 0) {
+ n = sprintf(data, "%lu\n", pd->stats.secs_rg >> 1);
+
+ } else if (strcmp(attr->name, "size") == 0) {
+ spin_lock(&pd->lock);
+ v = pd->bio_queue_size;
+ spin_unlock(&pd->lock);
+ n = sprintf(data, "%d\n", v);
+
+ } else if (strcmp(attr->name, "congestion_off") == 0) {
+ spin_lock(&pd->lock);
+ v = pd->write_congestion_off;
+ spin_unlock(&pd->lock);
+ n = sprintf(data, "%d\n", v);
+
+ } else if (strcmp(attr->name, "congestion_on") == 0) {
+ spin_lock(&pd->lock);
+ v = pd->write_congestion_on;
+ spin_unlock(&pd->lock);
+ n = sprintf(data, "%d\n", v);
+ }
+ return n;
+}
+
+static void init_write_congestion_marks(int* lo, int* hi)
+{
+ if (*hi > 0) {
+ *hi = max(*hi, 500);
+ *hi = min(*hi, 1000000);
+ if (*lo <= 0)
+ *lo = *hi - 100;
+ else {
+ *lo = min(*lo, *hi - 100);
+ *lo = max(*lo, 100);
+ }
+ } else {
+ *hi = -1;
+ *lo = -1;
+ }
+}
+
+static ssize_t kobj_pkt_store(struct kobject *kobj,
+ struct attribute *attr,
+ const char *data, size_t len)
+{
+ struct pktcdvd_device *pd = to_pktcdvdkobj(kobj)->pd;
+ int val;
+ DECLARE_BUF_AS_STRING(dbuf, data, len); /* ensure sscanf scans a string */
+
+ if (strcmp(attr->name, "reset") == 0 && dlen > 0) {
+ pd->stats.pkt_started = 0;
+ pd->stats.pkt_ended = 0;
+ pd->stats.secs_w = 0;
+ pd->stats.secs_rg = 0;
+ pd->stats.secs_r = 0;
+
+ } else if (strcmp(attr->name, "congestion_off") == 0
+ && sscanf(dbuf, "%d", &val) == 1) {
+ spin_lock(&pd->lock);
+ pd->write_congestion_off = val;
+ init_write_congestion_marks(&pd->write_congestion_off,
+ &pd->write_congestion_on);
+ spin_unlock(&pd->lock);
+
+ } else if (strcmp(attr->name, "congestion_on") == 0
+ && sscanf(dbuf, "%d", &val) == 1) {
+ spin_lock(&pd->lock);
+ pd->write_congestion_on = val;
+ init_write_congestion_marks(&pd->write_congestion_off,
+ &pd->write_congestion_on);
+ spin_unlock(&pd->lock);
+ }
+ return len;
+}
+
+static struct sysfs_ops kobj_pkt_ops = {
+ .show = kobj_pkt_show,
+ .store = kobj_pkt_store
+};
+static struct kobj_type kobj_pkt_type_stat = {
+ .release = pkt_kobj_release,
+ .sysfs_ops = &kobj_pkt_ops,
+ .default_attrs = kobj_pkt_attrs_stat
+};
+static struct kobj_type kobj_pkt_type_wqueue = {
+ .release = pkt_kobj_release,
+ .sysfs_ops = &kobj_pkt_ops,
+ .default_attrs = kobj_pkt_attrs_wqueue
+};
+
+static void pkt_sysfs_dev_new(struct pktcdvd_device *pd)
+{
+ if (class_pktcdvd) {
+ pd->clsdev = class_device_create(class_pktcdvd,
+ NULL, pd->pkt_dev,
+ NULL, "%s", pd->name);
+ if (IS_ERR(pd->clsdev))
+ pd->clsdev = NULL;
+ }
+ if (pd->clsdev) {
+ pd->kobj_stat = pkt_kobj_create(pd, "stat",
+ &pd->clsdev->kobj,
+ &kobj_pkt_type_stat);
+ pd->kobj_wqueue = pkt_kobj_create(pd, "write_queue",
+ &pd->clsdev->kobj,
+ &kobj_pkt_type_wqueue);
+ }
+}
+
+static void pkt_sysfs_dev_remove(struct pktcdvd_device *pd)
+{
+ pkt_kobj_remove(pd->kobj_stat);
+ pkt_kobj_remove(pd->kobj_wqueue);
+ if (class_pktcdvd)
+ class_device_destroy(class_pktcdvd, pd->pkt_dev);
+}
+
+
+/********************************************************************
+ /sys/class/pktcdvd/
+ add map block device
+ remove unmap packet dev
+ device_map show mappings
+ *******************************************************************/
+
+static void class_pktcdvd_release(struct class *cls)
+{
+ kfree(cls);
+}
+static ssize_t class_pktcdvd_show_map(struct class *c, char *data)
+{
+ int n = 0;
+ int idx;
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+ for (idx = 0; idx < MAX_WRITERS; idx++) {
+ struct pktcdvd_device *pd = pkt_devs[idx];
+ if (!pd)
+ continue;
+ n += sprintf(data+n, "%s %u:%u %u:%u\n",
+ pd->name,
+ MAJOR(pd->pkt_dev), MINOR(pd->pkt_dev),
+ MAJOR(pd->bdev->bd_dev),
+ MINOR(pd->bdev->bd_dev));
+ }
+ mutex_unlock(&ctl_mutex);
+ return n;
+}
+
+static ssize_t class_pktcdvd_store_add(struct class *c, const char *buf,
+ size_t count)
+{
+ unsigned int major, minor;
+ DECLARE_BUF_AS_STRING(dbuf, buf, count);
+ if (sscanf(dbuf, "%u:%u", &major, &minor) == 2) {
+ pkt_setup_dev(MKDEV(major, minor), NULL);
+ return count;
+ }
+ return -EINVAL;
+}
+
+static ssize_t class_pktcdvd_store_remove(struct class *c, const char *buf,
+ size_t count)
+{
+ unsigned int major, minor;
+ DECLARE_BUF_AS_STRING(dbuf, buf, count);
+ if (sscanf(dbuf, "%u:%u", &major, &minor) == 2) {
+ pkt_remove_dev(MKDEV(major, minor));
+ return count;
+ }
+ return -EINVAL;
+}
+
+static struct class_attribute class_pktcdvd_attrs[] = {
+ __ATTR(add, 0200, NULL, class_pktcdvd_store_add),
+ __ATTR(remove, 0200, NULL, class_pktcdvd_store_remove),
+ __ATTR(device_map, 0444, class_pktcdvd_show_map, NULL),
+ __ATTR_NULL
+};
+
+
+static int pkt_sysfs_init(void)
+{
+ int ret = 0;
+
+ /*
+ * create control files in sysfs
+ * /sys/class/pktcdvd/...
+ */
+ class_pktcdvd = kzalloc(sizeof(*class_pktcdvd), GFP_KERNEL);
+ if (!class_pktcdvd)
+ return -ENOMEM;
+ class_pktcdvd->name = DRIVER_NAME;
+ class_pktcdvd->owner = THIS_MODULE;
+ class_pktcdvd->class_release = class_pktcdvd_release;
+ class_pktcdvd->class_attrs = class_pktcdvd_attrs;
+ ret = class_register(class_pktcdvd);
+ if (ret) {
+ kfree(class_pktcdvd);
+ class_pktcdvd = NULL;
+ printk(DRIVER_NAME": failed to create class pktcdvd\n");
+ return ret;
+ }
+ return 0;
+}
+
+static void pkt_sysfs_cleanup(void)
+{
+ if (class_pktcdvd)
+ class_destroy(class_pktcdvd);
+ class_pktcdvd = NULL;
+}
+
+/********************************************************************
+ entries in debugfs
+
+ /debugfs/pktcdvd[0-7]/
+ info
+
+ *******************************************************************/
+
+static int pkt_debugfs_seq_show(struct seq_file *m, void *p)
+{
+ return pkt_seq_show(m, p);
+}
+
+static int pkt_debugfs_fops_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pkt_debugfs_seq_show, inode->i_private);
+}
+
+static struct file_operations debug_fops = {
+ .open = pkt_debugfs_fops_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static void pkt_debugfs_dev_new(struct pktcdvd_device *pd)
+{
+ if (!pkt_debugfs_root)
+ return;
+ pd->dfs_f_info = NULL;
+ pd->dfs_d_root = debugfs_create_dir(pd->name, pkt_debugfs_root);
+ if (IS_ERR(pd->dfs_d_root)) {
+ pd->dfs_d_root = NULL;
+ return;
+ }
+ pd->dfs_f_info = debugfs_create_file("info", S_IRUGO,
+ pd->dfs_d_root, pd, &debug_fops);
+ if (IS_ERR(pd->dfs_f_info)) {
+ pd->dfs_f_info = NULL;
+ return;
+ }
+}
+
+static void pkt_debugfs_dev_remove(struct pktcdvd_device *pd)
+{
+ if (!pkt_debugfs_root)
+ return;
+ if (pd->dfs_f_info)
+ debugfs_remove(pd->dfs_f_info);
+ pd->dfs_f_info = NULL;
+ if (pd->dfs_d_root)
+ debugfs_remove(pd->dfs_d_root);
+ pd->dfs_d_root = NULL;
+}
+
+static void pkt_debugfs_init(void)
+{
+ pkt_debugfs_root = debugfs_create_dir(DRIVER_NAME, NULL);
+ if (IS_ERR(pkt_debugfs_root)) {
+ pkt_debugfs_root = NULL;
+ return;
+ }
+}
+
+static void pkt_debugfs_cleanup(void)
+{
+ if (!pkt_debugfs_root)
+ return;
+ debugfs_remove(pkt_debugfs_root);
+ pkt_debugfs_root = NULL;
+}
+
+/* ----------------------------------------------------------*/
+
static void pkt_bio_finished(struct pktcdvd_device *pd)
{
sector_t zone = 0; /* Suppress gcc warning */
struct pkt_rb_node *node, *first_node;
struct rb_node *n;
+ int wakeup;
VPRINTK("handle_queue\n");
pkt->write_size += bio->bi_size / CD_FRAMESIZE;
spin_unlock(&pkt->lock);
}
+ /* check write congestion marks, and if bio_queue_size is
+ below, wake up any waiters */
+ wakeup = (pd->write_congestion_on > 0
+ && pd->bio_queue_size <= pd->write_congestion_off);
spin_unlock(&pd->lock);
+ if (wakeup)
+ blk_clear_queue_congested(pd->disk->queue, WRITE);
pkt->sleep_time = max(PACKET_WAIT_TIME, 1);
pkt_set_state(pkt, PACKET_WAITING_STATE);
}
spin_unlock(&pd->cdrw.active_list_lock);
+ /*
+ * Test if there is enough room left in the bio work queue
+ * (queue size >= congestion on mark).
+ * If not, wait till the work queue size is below the congestion off mark.
+ */
+ spin_lock(&pd->lock);
+ if (pd->write_congestion_on > 0
+ && pd->bio_queue_size >= pd->write_congestion_on) {
+ blk_set_queue_congested(q, WRITE);
+ do {
+ spin_unlock(&pd->lock);
+ congestion_wait(WRITE, HZ);
+ spin_lock(&pd->lock);
+ } while(pd->bio_queue_size > pd->write_congestion_off);
+ }
+ spin_unlock(&pd->lock);
+
/*
* No matching packet found. Store the bio in the work queue.
*/
seq_printf(m, "\tstate:\t\t\ti:%d ow:%d rw:%d ww:%d rec:%d fin:%d\n",
states[0], states[1], states[2], states[3], states[4], states[5]);
+ seq_printf(m, "\twrite congestion marks:\toff=%d on=%d\n",
+ pd->write_congestion_off,
+ pd->write_congestion_on);
return 0;
}
/*
* Set up mapping from pktcdvd device to CD-ROM device.
*/
-static int pkt_setup_dev(struct pkt_ctrl_command *ctrl_cmd)
+static int pkt_setup_dev(dev_t dev, dev_t* pkt_dev)
{
int idx;
int ret = -ENOMEM;
struct pktcdvd_device *pd;
struct gendisk *disk;
- dev_t dev = new_decode_dev(ctrl_cmd->dev);
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
for (idx = 0; idx < MAX_WRITERS; idx++)
if (!pkt_devs[idx])
break;
if (idx == MAX_WRITERS) {
printk(DRIVER_NAME": max %d writers supported\n", MAX_WRITERS);
- return -EBUSY;
+ ret = -EBUSY;
+ goto out_mutex;
}
pd = kzalloc(sizeof(struct pktcdvd_device), GFP_KERNEL);
if (!pd)
- return ret;
+ goto out_mutex;
pd->rb_pool = mempool_create_kmalloc_pool(PKT_RB_POOL_SIZE,
sizeof(struct pkt_rb_node));
if (!pd->rb_pool)
goto out_mem;
- disk = alloc_disk(1);
- if (!disk)
- goto out_mem;
- pd->disk = disk;
-
INIT_LIST_HEAD(&pd->cdrw.pkt_free_list);
INIT_LIST_HEAD(&pd->cdrw.pkt_active_list);
spin_lock_init(&pd->cdrw.active_list_lock);
init_waitqueue_head(&pd->wqueue);
pd->bio_queue = RB_ROOT;
+ pd->write_congestion_on = write_congestion_on;
+ pd->write_congestion_off = write_congestion_off;
+
+ disk = alloc_disk(1);
+ if (!disk)
+ goto out_mem;
+ pd->disk = disk;
disk->major = pktdev_major;
disk->first_minor = idx;
disk->fops = &pktcdvd_ops;
disk->flags = GENHD_FL_REMOVABLE;
- sprintf(disk->disk_name, DRIVER_NAME"%d", idx);
+ strcpy(disk->disk_name, pd->name);
disk->private_data = pd;
disk->queue = blk_alloc_queue(GFP_KERNEL);
if (!disk->queue)
goto out_new_dev;
add_disk(disk);
+
+ pkt_sysfs_dev_new(pd);
+ pkt_debugfs_dev_new(pd);
+
pkt_devs[idx] = pd;
- ctrl_cmd->pkt_dev = new_encode_dev(pd->pkt_dev);
+ if (pkt_dev)
+ *pkt_dev = pd->pkt_dev;
+
+ mutex_unlock(&ctl_mutex);
return 0;
out_new_dev:
if (pd->rb_pool)
mempool_destroy(pd->rb_pool);
kfree(pd);
+out_mutex:
+ mutex_unlock(&ctl_mutex);
+ printk(DRIVER_NAME": setup of pktcdvd device failed\n");
return ret;
}
/*
* Tear down mapping from pktcdvd device to CD-ROM device.
*/
-static int pkt_remove_dev(struct pkt_ctrl_command *ctrl_cmd)
+static int pkt_remove_dev(dev_t pkt_dev)
{
struct pktcdvd_device *pd;
int idx;
- dev_t pkt_dev = new_decode_dev(ctrl_cmd->pkt_dev);
+ int ret = 0;
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
for (idx = 0; idx < MAX_WRITERS; idx++) {
pd = pkt_devs[idx];
}
if (idx == MAX_WRITERS) {
DPRINTK(DRIVER_NAME": dev not setup\n");
- return -ENXIO;
+ ret = -ENXIO;
+ goto out;
}
- if (pd->refcnt > 0)
- return -EBUSY;
-
+ if (pd->refcnt > 0) {
+ ret = -EBUSY;
+ goto out;
+ }
if (!IS_ERR(pd->cdrw.thread))
kthread_stop(pd->cdrw.thread);
+ pkt_devs[idx] = NULL;
+
+ pkt_debugfs_dev_remove(pd);
+ pkt_sysfs_dev_remove(pd);
+
blkdev_put(pd->bdev);
remove_proc_entry(pd->name, pkt_proc);
blk_cleanup_queue(pd->disk->queue);
put_disk(pd->disk);
- pkt_devs[idx] = NULL;
mempool_destroy(pd->rb_pool);
kfree(pd);
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
- return 0;
+
+out:
+ mutex_unlock(&ctl_mutex);
+ return ret;
}
static void pkt_get_status(struct pkt_ctrl_command *ctrl_cmd)
{
- struct pktcdvd_device *pd = pkt_find_dev_from_minor(ctrl_cmd->dev_index);
+ struct pktcdvd_device *pd;
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+
+ pd = pkt_find_dev_from_minor(ctrl_cmd->dev_index);
if (pd) {
ctrl_cmd->dev = new_encode_dev(pd->bdev->bd_dev);
ctrl_cmd->pkt_dev = new_encode_dev(pd->pkt_dev);
ctrl_cmd->pkt_dev = 0;
}
ctrl_cmd->num_devices = MAX_WRITERS;
+
+ mutex_unlock(&ctl_mutex);
}
static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
void __user *argp = (void __user *)arg;
struct pkt_ctrl_command ctrl_cmd;
int ret = 0;
+ dev_t pkt_dev = 0;
if (cmd != PACKET_CTRL_CMD)
return -ENOTTY;
case PKT_CTRL_CMD_SETUP:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- ret = pkt_setup_dev(&ctrl_cmd);
- mutex_unlock(&ctl_mutex);
+ ret = pkt_setup_dev(new_decode_dev(ctrl_cmd.dev), &pkt_dev);
+ ctrl_cmd.pkt_dev = new_encode_dev(pkt_dev);
break;
case PKT_CTRL_CMD_TEARDOWN:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- ret = pkt_remove_dev(&ctrl_cmd);
- mutex_unlock(&ctl_mutex);
+ ret = pkt_remove_dev(new_decode_dev(ctrl_cmd.pkt_dev));
break;
case PKT_CTRL_CMD_STATUS:
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
pkt_get_status(&ctrl_cmd);
- mutex_unlock(&ctl_mutex);
break;
default:
return -ENOTTY;
{
int ret;
+ mutex_init(&ctl_mutex);
+
psd_pool = mempool_create_kmalloc_pool(PSD_POOL_SIZE,
sizeof(struct packet_stacked_data));
if (!psd_pool)
if (!pktdev_major)
pktdev_major = ret;
+ ret = pkt_sysfs_init();
+ if (ret)
+ goto out;
+
+ pkt_debugfs_init();
+
ret = misc_register(&pkt_misc);
if (ret) {
printk(DRIVER_NAME": Unable to register misc device\n");
- goto out;
+ goto out_misc;
}
- mutex_init(&ctl_mutex);
-
pkt_proc = proc_mkdir(DRIVER_NAME, proc_root_driver);
return 0;
+out_misc:
+ pkt_debugfs_cleanup();
+ pkt_sysfs_cleanup();
out:
unregister_blkdev(pktdev_major, DRIVER_NAME);
out2:
{
remove_proc_entry(DRIVER_NAME, proc_root_driver);
misc_deregister(&pkt_misc);
+
+ pkt_debugfs_cleanup();
+ pkt_sysfs_cleanup();
+
unregister_blkdev(pktdev_major, DRIVER_NAME);
mempool_destroy(psd_pool);
}
+++ /dev/null
-/*
- * Driver for the SWIM (Super Woz Integrated Machine) IOP
- * floppy controller on the Macintosh IIfx and Quadra 900/950
- *
- * Written by Joshua M. Thompson (funaho@jurai.org)
- * based on the SWIM3 driver (c) 1996 by Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * 1999-06-12 (jmt) - Initial implementation.
- */
-
-/*
- * -------------------
- * Theory of Operation
- * -------------------
- *
- * Since the SWIM IOP is message-driven we implement a simple request queue
- * system. One outstanding request may be queued at any given time (this is
- * an IOP limitation); only when that request has completed can a new request
- * be sent.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/fd.h>
-#include <linux/ioctl.h>
-#include <linux/blkdev.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/mac_iop.h>
-#include <asm/swim_iop.h>
-
-#define DRIVER_VERSION "Version 0.1 (1999-06-12)"
-
-#define MAX_FLOPPIES 4
-
-enum swim_state {
- idle,
- available,
- revalidating,
- transferring,
- ejecting
-};
-
-struct floppy_state {
- enum swim_state state;
- int drive_num; /* device number */
- int secpercyl; /* disk geometry information */
- int secpertrack;
- int total_secs;
- int write_prot; /* 1 if write-protected, 0 if not, -1 dunno */
- int ref_count;
- struct timer_list timeout;
- int ejected;
- struct wait_queue *wait;
- int wanted;
- int timeout_pending;
-};
-
-struct swim_iop_req {
- int sent;
- int complete;
- __u8 command[32];
- struct floppy_state *fs;
- void (*done)(struct swim_iop_req *);
-};
-
-static struct swim_iop_req *current_req;
-static int floppy_count;
-
-static struct floppy_state floppy_states[MAX_FLOPPIES];
-static DEFINE_SPINLOCK(swim_iop_lock);
-
-#define CURRENT elv_next_request(swim_queue)
-
-static char *drive_names[7] = {
- "not installed", /* DRV_NONE */
- "unknown (1)", /* DRV_UNKNOWN */
- "a 400K drive", /* DRV_400K */
- "an 800K drive" /* DRV_800K */
- "unknown (4)", /* ???? */
- "an FDHD", /* DRV_FDHD */
- "unknown (6)", /* ???? */
- "an Apple HD20" /* DRV_HD20 */
-};
-
-int swimiop_init(void);
-static void swimiop_init_request(struct swim_iop_req *);
-static int swimiop_send_request(struct swim_iop_req *);
-static void swimiop_receive(struct iop_msg *);
-static void swimiop_status_update(int, struct swim_drvstatus *);
-static int swimiop_eject(struct floppy_state *fs);
-
-static int floppy_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long param);
-static int floppy_open(struct inode *inode, struct file *filp);
-static int floppy_release(struct inode *inode, struct file *filp);
-static int floppy_check_change(struct gendisk *disk);
-static int floppy_revalidate(struct gendisk *disk);
-static int grab_drive(struct floppy_state *fs, enum swim_state state,
- int interruptible);
-static void release_drive(struct floppy_state *fs);
-static void set_timeout(struct floppy_state *fs, int nticks,
- void (*proc)(unsigned long));
-static void fd_request_timeout(unsigned long);
-static void do_fd_request(request_queue_t * q);
-static void start_request(struct floppy_state *fs);
-
-static struct block_device_operations floppy_fops = {
- .open = floppy_open,
- .release = floppy_release,
- .ioctl = floppy_ioctl,
- .media_changed = floppy_check_change,
- .revalidate_disk= floppy_revalidate,
-};
-
-static struct request_queue *swim_queue;
-/*
- * SWIM IOP initialization
- */
-
-int swimiop_init(void)
-{
- volatile struct swim_iop_req req;
- struct swimcmd_status *cmd = (struct swimcmd_status *) &req.command[0];
- struct swim_drvstatus *ds = &cmd->status;
- struct floppy_state *fs;
- int i;
-
- current_req = NULL;
- floppy_count = 0;
-
- if (!iop_ism_present)
- return -ENODEV;
-
- if (register_blkdev(FLOPPY_MAJOR, "fd"))
- return -EBUSY;
-
- swim_queue = blk_init_queue(do_fd_request, &swim_iop_lock);
- if (!swim_queue) {
- unregister_blkdev(FLOPPY_MAJOR, "fd");
- return -ENOMEM;
- }
-
- printk("SWIM-IOP: %s by Joshua M. Thompson (funaho@jurai.org)\n",
- DRIVER_VERSION);
-
- if (iop_listen(SWIM_IOP, SWIM_CHAN, swimiop_receive, "SWIM") != 0) {
- printk(KERN_ERR "SWIM-IOP: IOP channel already in use; can't initialize.\n");
- unregister_blkdev(FLOPPY_MAJOR, "fd");
- blk_cleanup_queue(swim_queue);
- return -EBUSY;
- }
-
- printk(KERN_ERR "SWIM_IOP: probing for installed drives.\n");
-
- for (i = 0 ; i < MAX_FLOPPIES ; i++) {
- memset(&floppy_states[i], 0, sizeof(struct floppy_state));
- fs = &floppy_states[floppy_count];
-
- swimiop_init_request(&req);
- cmd->code = CMD_STATUS;
- cmd->drive_num = i + 1;
- if (swimiop_send_request(&req) != 0) continue;
- while (!req.complete);
- if (cmd->error != 0) {
- printk(KERN_ERR "SWIM-IOP: probe on drive %d returned error %d\n", i, (uint) cmd->error);
- continue;
- }
- if (ds->installed != 0x01) continue;
- printk("SWIM-IOP: drive %d is %s (%s, %s, %s, %s)\n", i,
- drive_names[ds->info.type],
- ds->info.external? "ext" : "int",
- ds->info.scsi? "scsi" : "floppy",
- ds->info.fixed? "fixed" : "removable",
- ds->info.secondary? "secondary" : "primary");
- swimiop_status_update(floppy_count, ds);
- fs->state = idle;
-
- init_timer(&fs->timeout);
- floppy_count++;
- }
- printk("SWIM-IOP: detected %d installed drives.\n", floppy_count);
-
- for (i = 0; i < floppy_count; i++) {
- struct gendisk *disk = alloc_disk(1);
- if (!disk)
- continue;
- disk->major = FLOPPY_MAJOR;
- disk->first_minor = i;
- disk->fops = &floppy_fops;
- sprintf(disk->disk_name, "fd%d", i);
- disk->private_data = &floppy_states[i];
- disk->queue = swim_queue;
- set_capacity(disk, 2880 * 2);
- add_disk(disk);
- }
-
- return 0;
-}
-
-static void swimiop_init_request(struct swim_iop_req *req)
-{
- req->sent = 0;
- req->complete = 0;
- req->done = NULL;
-}
-
-static int swimiop_send_request(struct swim_iop_req *req)
-{
- unsigned long flags;
- int err;
-
- /* It's doubtful an interrupt routine would try to send */
- /* a SWIM request, but I'd rather play it safe here. */
-
- local_irq_save(flags);
-
- if (current_req != NULL) {
- local_irq_restore(flags);
- return -ENOMEM;
- }
-
- current_req = req;
-
- /* Interrupts should be back on for iop_send_message() */
-
- local_irq_restore(flags);
-
- err = iop_send_message(SWIM_IOP, SWIM_CHAN, (void *) req,
- sizeof(req->command), (__u8 *) &req->command[0],
- swimiop_receive);
-
- /* No race condition here; we own current_req at this point */
-
- if (err) {
- current_req = NULL;
- } else {
- req->sent = 1;
- }
- return err;
-}
-
-/*
- * Receive a SWIM message from the IOP.
- *
- * This will be called in two cases:
- *
- * 1. A message has been successfully sent to the IOP.
- * 2. An unsolicited message was received from the IOP.
- */
-
-void swimiop_receive(struct iop_msg *msg)
-{
- struct swim_iop_req *req;
- struct swimmsg_status *sm;
- struct swim_drvstatus *ds;
-
- req = current_req;
-
- switch(msg->status) {
- case IOP_MSGSTATUS_COMPLETE:
- memcpy(&req->command[0], &msg->reply[0], sizeof(req->command));
- req->complete = 1;
- if (req->done) (*req->done)(req);
- current_req = NULL;
- break;
- case IOP_MSGSTATUS_UNSOL:
- sm = (struct swimmsg_status *) &msg->message[0];
- ds = &sm->status;
- swimiop_status_update(sm->drive_num, ds);
- iop_complete_message(msg);
- break;
- }
-}
-
-static void swimiop_status_update(int drive_num, struct swim_drvstatus *ds)
-{
- struct floppy_state *fs = &floppy_states[drive_num];
-
- fs->write_prot = (ds->write_prot == 0x80);
- if ((ds->disk_in_drive != 0x01) && (ds->disk_in_drive != 0x02)) {
- fs->ejected = 1;
- } else {
- fs->ejected = 0;
- }
- switch(ds->info.type) {
- case DRV_400K:
- fs->secpercyl = 10;
- fs->secpertrack = 10;
- fs->total_secs = 800;
- break;
- case DRV_800K:
- fs->secpercyl = 20;
- fs->secpertrack = 10;
- fs->total_secs = 1600;
- break;
- case DRV_FDHD:
- fs->secpercyl = 36;
- fs->secpertrack = 18;
- fs->total_secs = 2880;
- break;
- default:
- fs->secpercyl = 0;
- fs->secpertrack = 0;
- fs->total_secs = 0;
- break;
- }
-}
-
-static int swimiop_eject(struct floppy_state *fs)
-{
- int err, n;
- struct swim_iop_req req;
- struct swimcmd_eject *cmd = (struct swimcmd_eject *) &req.command[0];
-
- err = grab_drive(fs, ejecting, 1);
- if (err) return err;
-
- swimiop_init_request(&req);
- cmd->code = CMD_EJECT;
- cmd->drive_num = fs->drive_num;
- err = swimiop_send_request(&req);
- if (err) {
- release_drive(fs);
- return err;
- }
- for (n = 2*HZ; n > 0; --n) {
- if (req.complete) break;
- if (signal_pending(current)) {
- err = -EINTR;
- break;
- }
- schedule_timeout_interruptible(1);
- }
- release_drive(fs);
- return cmd->error;
-}
-
-static struct floppy_struct floppy_type =
- { 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,NULL }; /* 7 1.44MB 3.5" */
-
-static int floppy_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long param)
-{
- struct floppy_state *fs = inode->i_bdev->bd_disk->private_data;
- int err;
-
- if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- switch (cmd) {
- case FDEJECT:
- if (fs->ref_count != 1)
- return -EBUSY;
- err = swimiop_eject(fs);
- return err;
- case FDGETPRM:
- if (copy_to_user((void *) param, (void *) &floppy_type,
- sizeof(struct floppy_struct)))
- return -EFAULT;
- return 0;
- }
- return -ENOTTY;
-}
-
-static int floppy_open(struct inode *inode, struct file *filp)
-{
- struct floppy_state *fs = inode->i_bdev->bd_disk->private_data;
-
- if (fs->ref_count == -1 || filp->f_flags & O_EXCL)
- return -EBUSY;
-
- if ((filp->f_flags & O_NDELAY) == 0 && (filp->f_mode & 3)) {
- check_disk_change(inode->i_bdev);
- if (fs->ejected)
- return -ENXIO;
- }
-
- if ((filp->f_mode & 2) && fs->write_prot)
- return -EROFS;
-
- if (filp->f_flags & O_EXCL)
- fs->ref_count = -1;
- else
- ++fs->ref_count;
-
- return 0;
-}
-
-static int floppy_release(struct inode *inode, struct file *filp)
-{
- struct floppy_state *fs = inode->i_bdev->bd_disk->private_data;
- if (fs->ref_count > 0)
- fs->ref_count--;
- return 0;
-}
-
-static int floppy_check_change(struct gendisk *disk)
-{
- struct floppy_state *fs = disk->private_data;
- return fs->ejected;
-}
-
-static int floppy_revalidate(struct gendisk *disk)
-{
- struct floppy_state *fs = disk->private_data;
- grab_drive(fs, revalidating, 0);
- /* yadda, yadda */
- release_drive(fs);
- return 0;
-}
-
-static void floppy_off(unsigned int nr)
-{
-}
-
-static int grab_drive(struct floppy_state *fs, enum swim_state state,
- int interruptible)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- if (fs->state != idle) {
- ++fs->wanted;
- while (fs->state != available) {
- if (interruptible && signal_pending(current)) {
- --fs->wanted;
- local_irq_restore(flags);
- return -EINTR;
- }
- interruptible_sleep_on(&fs->wait);
- }
- --fs->wanted;
- }
- fs->state = state;
- local_irq_restore(flags);
- return 0;
-}
-
-static void release_drive(struct floppy_state *fs)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- fs->state = idle;
- start_request(fs);
- local_irq_restore(flags);
-}
-
-static void set_timeout(struct floppy_state *fs, int nticks,
- void (*proc)(unsigned long))
-{
- unsigned long flags;
-
- local_irq_save(flags);
- if (fs->timeout_pending)
- del_timer(&fs->timeout);
- init_timer(&fs->timeout);
- fs->timeout.expires = jiffies + nticks;
- fs->timeout.function = proc;
- fs->timeout.data = (unsigned long) fs;
- add_timer(&fs->timeout);
- fs->timeout_pending = 1;
- local_irq_restore(flags);
-}
-
-static void do_fd_request(request_queue_t * q)
-{
- int i;
-
- for (i = 0 ; i < floppy_count ; i++) {
- start_request(&floppy_states[i]);
- }
-}
-
-static void fd_request_complete(struct swim_iop_req *req)
-{
- struct floppy_state *fs = req->fs;
- struct swimcmd_rw *cmd = (struct swimcmd_rw *) &req->command[0];
-
- del_timer(&fs->timeout);
- fs->timeout_pending = 0;
- fs->state = idle;
- if (cmd->error) {
- printk(KERN_ERR "SWIM-IOP: error %d on read/write request.\n", cmd->error);
- end_request(CURRENT, 0);
- } else {
- CURRENT->sector += cmd->num_blocks;
- CURRENT->current_nr_sectors -= cmd->num_blocks;
- if (CURRENT->current_nr_sectors <= 0) {
- end_request(CURRENT, 1);
- return;
- }
- }
- start_request(fs);
-}
-
-static void fd_request_timeout(unsigned long data)
-{
- struct floppy_state *fs = (struct floppy_state *) data;
-
- fs->timeout_pending = 0;
- end_request(CURRENT, 0);
- fs->state = idle;
-}
-
-static void start_request(struct floppy_state *fs)
-{
- volatile struct swim_iop_req req;
- struct swimcmd_rw *cmd = (struct swimcmd_rw *) &req.command[0];
-
- if (fs->state == idle && fs->wanted) {
- fs->state = available;
- wake_up(&fs->wait);
- return;
- }
- while (CURRENT && fs->state == idle) {
- if (CURRENT->bh && !buffer_locked(CURRENT->bh))
- panic("floppy: block not locked");
-#if 0
- printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n",
- CURRENT->rq_disk->disk_name, CURRENT->cmd,
- CURRENT->sector, CURRENT->nr_sectors, CURRENT->buffer);
- printk(" errors=%d current_nr_sectors=%ld\n",
- CURRENT->errors, CURRENT->current_nr_sectors);
-#endif
-
- if (CURRENT->sector < 0 || CURRENT->sector >= fs->total_secs) {
- end_request(CURRENT, 0);
- continue;
- }
- if (CURRENT->current_nr_sectors == 0) {
- end_request(CURRENT, 1);
- continue;
- }
- if (fs->ejected) {
- end_request(CURRENT, 0);
- continue;
- }
-
- swimiop_init_request(&req);
- req.fs = fs;
- req.done = fd_request_complete;
-
- if (CURRENT->cmd == WRITE) {
- if (fs->write_prot) {
- end_request(CURRENT, 0);
- continue;
- }
- cmd->code = CMD_WRITE;
- } else {
- cmd->code = CMD_READ;
-
- }
- cmd->drive_num = fs->drive_num;
- cmd->buffer = CURRENT->buffer;
- cmd->first_block = CURRENT->sector;
- cmd->num_blocks = CURRENT->current_nr_sectors;
-
- if (swimiop_send_request(&req)) {
- end_request(CURRENT, 0);
- continue;
- }
-
- set_timeout(fs, HZ*CURRENT->current_nr_sectors,
- fd_request_timeout);
-
- fs->state = transferring;
- }
-}
size = sizeof(s->disckey.value) + 4;
- if ((buf = (u_char *) kmalloc(size, GFP_KERNEL)) == NULL)
+ if ((buf = kmalloc(size, GFP_KERNEL)) == NULL)
return -ENOMEM;
init_cdrom_command(&cgc, buf, size, CGC_DATA_READ);
size = sizeof(s->manufact.value) + 4;
- if ((buf = (u_char *) kmalloc(size, GFP_KERNEL)) == NULL)
+ if ((buf = kmalloc(size, GFP_KERNEL)) == NULL)
return -ENOMEM;
init_cdrom_command(&cgc, buf, size, CGC_DATA_READ);
/* FIXME: we need upper bound checking, too!! */
if (lba < 0)
return -EINVAL;
- cgc.buffer = (char *) kmalloc(blocksize, GFP_KERNEL);
+ cgc.buffer = kmalloc(blocksize, GFP_KERNEL);
if (cgc.buffer == NULL)
return -ENOMEM;
memset(&sense, 0, sizeof(sense));
int size = sizeof(dvd_struct);
if (!CDROM_CAN(CDC_DVD))
return -ENOSYS;
- if ((s = (dvd_struct *) kmalloc(size, GFP_KERNEL)) == NULL)
+ if ((s = kmalloc(size, GFP_KERNEL)) == NULL)
return -ENOMEM;
cdinfo(CD_DO_IOCTL, "entering DVD_READ_STRUCT\n");
if (copy_from_user(s, (dvd_struct __user *)arg, size)) {
return -EIO;
}
printk(" adapter at 0x%x", cm206_base);
- cd = (struct cm206_struct *) kmalloc(size, GFP_KERNEL);
+ cd = kmalloc(size, GFP_KERNEL);
if (!cd)
goto out_base;
/* Now we have found the adaptor card, try to reset it. As we have
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
The module will be called mxser. If you want to do that, say M
here.
+config MOXA_SMARTIO_NEW
+ tristate "Moxa SmartIO support v. 2.0 (EXPERIMENTAL)"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card and/or
+ want to help develop a new version of this driver.
+
+ This is upgraded (1.9.1) driver from original Moxa drivers with
+ changes finally resulting in PCI probing.
+
+ Use at your own risk.
+
+ This driver can also be built as a module. The module will be called
+ mxser_new. If you want to do that, say M here.
+
config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI
select FW_LOADER
help
This is a driver for the Multi-Tech cards which provide several
config SX
tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
help
This is a driver for the SX and SI multiport serial cards.
Please read the file <file:Documentation/sx.txt> for details.
config TANBAC_TB0219
tristate "TANBAC TB0219 base board support"
- depends TANBAC_TB022X
+ depends on TANBAC_TB022X
select GPIO_VR41XX
source "drivers/char/agp/Kconfig"
obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
+obj-$(CONFIG_MOXA_SMARTIO_NEW) += mxser_new.o
obj-$(CONFIG_COMPUTONE) += ip2/
obj-$(CONFIG_RISCOM8) += riscom8.o
obj-$(CONFIG_ISI) += isicom.o
config AGP_SIS
tristate "SiS chipset support"
- depends on AGP
+ depends on AGP && X86
help
This option gives you AGP support for the GLX component of
X on Silicon Integrated Systems [SiS] chipsets.
config AGP_VIA
tristate "VIA chipset support"
- depends on AGP
+ depends on AGP && X86
help
This option gives you AGP support for the GLX component of
X on VIA MVP3/Apollo Pro chipsets.
*requested_mode &= ~AGP2_RESERVED_MASK;
}
+ /*
+ * Some dumb bridges are programmed to disobey the AGP2 spec.
+ * This is likely a BIOS misprogramming rather than poweron default, or
+ * it would be a lot more common.
+ * https://bugs.freedesktop.org/show_bug.cgi?id=8816
+ * AGPv2 spec 6.1.9 states:
+ * The RATE field indicates the data transfer rates supported by this
+ * device. A.G.P. devices must report all that apply.
+ * Fix them up as best we can.
+ */
+ switch (*bridge_agpstat & 7) {
+ case 4:
+ *bridge_agpstat |= (AGPSTAT2_2X | AGPSTAT2_1X);
+ printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x4 rate"
+ "Fixing up support for x2 & x1\n");
+ break;
+ case 2:
+ *bridge_agpstat |= AGPSTAT2_1X;
+ printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x2 rate"
+ "Fixing up support for x1\n");
+ break;
+ default:
+ break;
+ }
+
/* Check the speed bits make sense. Only one should be set. */
tmp = *requested_mode & 7;
switch (tmp) {
static unsigned char current_ctl_bits;
-static void change_speed(struct async_struct *info, struct termios *old);
+static void change_speed(struct async_struct *info, struct ktermios *old);
static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
* the specified baud rate for a serial port.
*/
static void change_speed(struct async_struct *info,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
int quot = 0, baud_base, baud;
unsigned cflag, cval = 0;
return 0;
}
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct async_struct *info = (struct async_struct *)tty->driver_data;
unsigned long flags;
p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
if (p && p->readonly) return -EIO;
if (!p || --p->refcount) {
- q = (struct uni_pagedir *)kmalloc(sizeof(*p), GFP_KERNEL);
+ q = kmalloc(sizeof(*p), GFP_KERNEL);
if (!q) {
if (p) p->refcount++;
return -ENOMEM;
static ssize_t cs5535_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
- u32 m = iminor(file->f_dentry->d_inode);
+ u32 m = iminor(file->f_path.dentry->d_inode);
int i, j;
u32 base = gpio_base + cs5535_lowhigh_base(m);
u32 m0, m1;
static ssize_t cs5535_gpio_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos)
{
- u32 m = iminor(file->f_dentry->d_inode);
+ u32 m = iminor(file->f_path.dentry->d_inode);
u32 base = gpio_base + cs5535_lowhigh_base(m);
int rd_bit = 1 << (m & 0x0f);
int i;
#undef BLOCKMOVE
#define Z_WAKE
#undef Z_EXT_CHARS_IN_BUFFER
-static char rcsid[] =
-"$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $";
/*
* linux/drivers/char/cyclades.c
*
*/
+#define CY_VERSION "2.4"
+
/* If you need to install more boards than NR_CARDS, change the constant
in the definition below. No other change is necessary to support up to
eight boards. Beyond that you'll have to extend cy_isa_addresses. */
-#define NR_CARDS 4
+#define NR_CARDS 4
/*
If the total number of ports is larger than NR_PORTS, change this
constant in the definition below. No other change is necessary to
support more boards/ports. */
-#define NR_PORTS 256
+#define NR_PORTS 256
#define ZE_V1_NPORTS 64
#define ZO_V1 0
#undef CY_PCI_DEBUG
#if 0
-#define PAUSE __asm__("nop");
+#define PAUSE __asm__("nop")
#else
-#define PAUSE ;
+#define PAUSE do {} while (0)
#endif
/*
do { \
spin_lock_irqsave(&cy_card[info->card].card_lock, flags); \
} while (0)
-
+
#define CY_UNLOCK(info,flags) \
do { \
spin_unlock_irqrestore(&cy_card[info->card].card_lock, flags); \
#include <linux/stat.h>
#include <linux/proc_fs.h>
-static void cy_throttle (struct tty_struct *tty);
-static void cy_send_xchar (struct tty_struct *tty, char ch);
+static void cy_throttle(struct tty_struct *tty);
+static void cy_send_xchar(struct tty_struct *tty, char ch);
#define IS_CYC_Z(card) ((card).num_chips == -1)
#define Z_FPGA_CHECK(card) \
- ((cy_readl(&((struct RUNTIME_9060 __iomem *) \
- ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0)
+ ((cy_readl(&((struct RUNTIME_9060 __iomem *) \
+ ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0)
#define ISZLOADED(card) (((ZO_V1==cy_readl(&((struct RUNTIME_9060 __iomem *) \
((card).ctl_addr))->mail_box_0)) || \
#define STD_COM_FLAGS (0)
-#define JIFFIES_DIFF(n, j) ((j) - (n))
-
static struct tty_driver *cy_serial_driver;
#ifdef CONFIG_ISA
*/
static unsigned int cy_isa_addresses[] = {
- 0xD0000,
- 0xD2000,
- 0xD4000,
- 0xD6000,
- 0xD8000,
- 0xDA000,
- 0xDC000,
- 0xDE000,
- 0,0,0,0,0,0,0,0
+ 0xD0000,
+ 0xD2000,
+ 0xD4000,
+ 0xD6000,
+ 0xD8000,
+ 0xDA000,
+ 0xDC000,
+ 0xDE000,
+ 0, 0, 0, 0, 0, 0, 0, 0
};
+
#define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses)
#ifdef MODULE
static long maddr[NR_CARDS] = { 0, };
-static int irq[NR_CARDS] = { 0, };
+static int irq[NR_CARDS] = { 0, };
module_param_array(maddr, long, NULL, 0);
module_param_array(irq, int, NULL, 0);
#endif
-#endif /* CONFIG_ISA */
+#endif /* CONFIG_ISA */
/* This is the per-card data structure containing address, irq, number of
channels, etc. This driver supports a maximum of NR_CARDS cards.
*/
static struct cyclades_port cy_port[NR_PORTS];
-static int cy_next_channel; /* next minor available */
+static int cy_next_channel; /* next minor available */
/*
* This is used to look up the divisor speeds and the timeouts
* 20
*/
static int baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
- 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800,115200,150000,
- 230400, 0};
-
-static char baud_co_25[] = { /* 25 MHz clock option table */
- /* value => 00 01 02 03 04 */
- /* divide by 8 32 128 512 2048 */
- 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
- 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-static char baud_bpr_25[] = { /* 25 MHz baud rate period table */
- 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
- 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15};
-
-static char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */
- /* value => 00 01 02 03 04 */
- /* divide by 8 32 128 512 2048 */
- 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
- 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00};
-
-static char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */
- 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
- 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
- 0x21};
-
-static char baud_cor3[] = { /* receive threshold */
- 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
- 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
- 0x07};
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
+ 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
+ 230400, 0
+};
+
+static char baud_co_25[] = { /* 25 MHz clock option table */
+ /* value => 00 01 02 03 04 */
+ /* divide by 8 32 128 512 2048 */
+ 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
+ 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+static char baud_bpr_25[] = { /* 25 MHz baud rate period table */
+ 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
+ 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
+};
+
+static char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */
+ /* value => 00 01 02 03 04 */
+ /* divide by 8 32 128 512 2048 */
+ 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
+ 0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00
+};
+
+static char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */
+ 0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
+ 0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
+ 0x21
+};
+
+static char baud_cor3[] = { /* receive threshold */
+ 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+ 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
+ 0x07
+};
/*
* The Cyclades driver implements HW flow control as any serial driver.
* cables.
*/
-static char rflow_thr[] = { /* rflow threshold */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
- 0x0a};
+static char rflow_thr[] = { /* rflow threshold */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
+ 0x0a
+};
/* The Cyclom-Ye has placed the sequential chips in non-sequential
* address order. This look-up table overcomes that problem.
*/
-static int cy_chip_offset [] =
- { 0x0000,
- 0x0400,
- 0x0800,
- 0x0C00,
- 0x0200,
- 0x0600,
- 0x0A00,
- 0x0E00
- };
+static int cy_chip_offset[] = { 0x0000,
+ 0x0400,
+ 0x0800,
+ 0x0C00,
+ 0x0200,
+ 0x0600,
+ 0x0A00,
+ 0x0E00
+};
/* PCI related definitions */
-static unsigned short cy_pci_nboard;
-static unsigned short cy_isa_nboard;
-static unsigned short cy_nboard;
+static unsigned short cy_pci_nboard;
+static unsigned short cy_isa_nboard;
+static unsigned short cy_nboard;
#ifdef CONFIG_PCI
-static unsigned short cy_pci_dev_id[] = {
- PCI_DEVICE_ID_CYCLOM_Y_Lo, /* PCI < 1Mb */
- PCI_DEVICE_ID_CYCLOM_Y_Hi, /* PCI > 1Mb */
- PCI_DEVICE_ID_CYCLOM_4Y_Lo, /* 4Y PCI < 1Mb */
- PCI_DEVICE_ID_CYCLOM_4Y_Hi, /* 4Y PCI > 1Mb */
- PCI_DEVICE_ID_CYCLOM_8Y_Lo, /* 8Y PCI < 1Mb */
- PCI_DEVICE_ID_CYCLOM_8Y_Hi, /* 8Y PCI > 1Mb */
- PCI_DEVICE_ID_CYCLOM_Z_Lo, /* Z PCI < 1Mb */
- PCI_DEVICE_ID_CYCLOM_Z_Hi, /* Z PCI > 1Mb */
- 0 /* end of table */
- };
+static unsigned short cy_pci_dev_id[] = {
+ PCI_DEVICE_ID_CYCLOM_Y_Lo, /* PCI < 1Mb */
+ PCI_DEVICE_ID_CYCLOM_Y_Hi, /* PCI > 1Mb */
+ PCI_DEVICE_ID_CYCLOM_4Y_Lo, /* 4Y PCI < 1Mb */
+ PCI_DEVICE_ID_CYCLOM_4Y_Hi, /* 4Y PCI > 1Mb */
+ PCI_DEVICE_ID_CYCLOM_8Y_Lo, /* 8Y PCI < 1Mb */
+ PCI_DEVICE_ID_CYCLOM_8Y_Hi, /* 8Y PCI > 1Mb */
+ PCI_DEVICE_ID_CYCLOM_Z_Lo, /* Z PCI < 1Mb */
+ PCI_DEVICE_ID_CYCLOM_Z_Hi, /* Z PCI > 1Mb */
+ 0 /* end of table */
+};
#endif
static void cy_start(struct tty_struct *);
static int cyz_issue_cmd(struct cyclades_card *, uclong, ucchar, uclong);
#ifdef CONFIG_ISA
static unsigned detect_isa_irq(void __iomem *);
-#endif /* CONFIG_ISA */
+#endif /* CONFIG_ISA */
-static int cyclades_get_proc_info(char *, char **, off_t , int , int *, void *);
+static int cyclades_get_proc_info(char *, char **, off_t, int, int *, void *);
#ifndef CONFIG_CYZ_INTR
static void cyz_poll(unsigned long);
static int cyz_timeron = 0;
static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0);
-#else /* CONFIG_CYZ_INTR */
+#else /* CONFIG_CYZ_INTR */
static void cyz_rx_restart(unsigned long);
static struct timer_list cyz_rx_full_timer[NR_PORTS];
-#endif /* CONFIG_CYZ_INTR */
+#endif /* CONFIG_CYZ_INTR */
-static inline int
-serial_paranoia_check(struct cyclades_port *info,
- char *name, const char *routine)
+static inline int serial_paranoia_check(struct cyclades_port *info,
+ char *name, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
- static const char *badmagic =
- "cyc Warning: bad magic number for serial struct (%s) in %s\n";
- static const char *badinfo =
- "cyc Warning: null cyclades_port for (%s) in %s\n";
- static const char *badrange =
- "cyc Warning: cyclades_port out of range for (%s) in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return 1;
- }
-
- if( (long)info < (long)(&cy_port[0])
- || (long)(&cy_port[NR_PORTS]) < (long)info ){
- printk(badrange, name, routine);
- return 1;
- }
-
- if (info->magic != CYCLADES_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
+ if (!info) {
+ printk("cyc Warning: null cyclades_port for (%s) in %s\n",
+ name, routine);
+ return 1;
+ }
+
+ if ((long)info < (long)(&cy_port[0]) ||
+ (long)(&cy_port[NR_PORTS]) < (long)info) {
+ printk("cyc Warning: cyclades_port out of range for (%s) in "
+ "%s\n", name, routine);
+ return 1;
+ }
+
+ if (info->magic != CYCLADES_MAGIC) {
+ printk("cyc Warning: bad magic number for serial struct (%s) "
+ "in %s\n", name, routine);
+ return 1;
+ }
#endif
- return 0;
-} /* serial_paranoia_check */
+ return 0;
+} /* serial_paranoia_check */
/*
* This routine is used by the interrupt handler to schedule
* (also known as the "bottom half"). This can be called any
* number of times for any channel without harm.
*/
-static inline void
-cy_sched_event(struct cyclades_port *info, int event)
+static inline void cy_sched_event(struct cyclades_port *info, int event)
{
- info->event |= 1 << event; /* remember what kind of event and who */
- schedule_work(&info->tqueue);
-} /* cy_sched_event */
-
+ info->event |= 1 << event; /* remember what kind of event and who */
+ schedule_work(&info->tqueue);
+} /* cy_sched_event */
/*
* This routine is used to handle the "bottom half" processing for the
{
struct cyclades_port *info =
container_of(work, struct cyclades_port, tqueue);
- struct tty_struct *tty;
-
- tty = info->tty;
- if (!tty)
- return;
-
- if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) {
- tty_hangup(info->tty);
- wake_up_interruptible(&info->open_wait);
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- }
- if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) {
- wake_up_interruptible(&info->open_wait);
- }
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
+ return;
+
+ if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) {
+ tty_hangup(info->tty);
+ wake_up_interruptible(&info->open_wait);
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ }
+ if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event))
+ wake_up_interruptible(&info->open_wait);
#ifdef CONFIG_CYZ_INTR
- if (test_and_clear_bit(Cy_EVENT_Z_RX_FULL, &info->event)) {
- if (cyz_rx_full_timer[info->line].function == NULL) {
- cyz_rx_full_timer[info->line].expires = jiffies + 1;
- cyz_rx_full_timer[info->line].function = cyz_rx_restart;
- cyz_rx_full_timer[info->line].data = (unsigned long)info;
- add_timer(&cyz_rx_full_timer[info->line]);
+ if (test_and_clear_bit(Cy_EVENT_Z_RX_FULL, &info->event)) {
+ if (cyz_rx_full_timer[info->line].function == NULL) {
+ cyz_rx_full_timer[info->line].expires = jiffies + 1;
+ cyz_rx_full_timer[info->line].function = cyz_rx_restart;
+ cyz_rx_full_timer[info->line].data =
+ (unsigned long)info;
+ add_timer(&cyz_rx_full_timer[info->line]);
+ }
}
- }
#endif
- if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) {
- wake_up_interruptible(&info->delta_msr_wait);
- }
- if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) {
- tty_wakeup(tty);
- wake_up_interruptible(&tty->write_wait);
- }
+ if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event))
+ wake_up_interruptible(&info->delta_msr_wait);
+ tty_wakeup(tty);
#ifdef Z_WAKE
- if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) {
- wake_up_interruptible(&info->shutdown_wait);
- }
+ if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event))
+ wake_up_interruptible(&info->shutdown_wait);
#endif
} /* do_softint */
This function is only called from inside spinlock-protected code.
*/
-static int
-cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
+static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index)
{
- volatile int i;
+ volatile int i;
- /* Check to see that the previous command has completed */
- for(i = 0 ; i < 100 ; i++){
- if (cy_readb(base_addr+(CyCCR<<index)) == 0){
- break;
+ /* Check to see that the previous command has completed */
+ for (i = 0; i < 100; i++) {
+ if (cy_readb(base_addr + (CyCCR << index)) == 0) {
+ break;
+ }
+ udelay(10L);
}
- udelay(10L);
- }
- /* if the CCR never cleared, the previous command
- didn't finish within the "reasonable time" */
- if (i == 100) return (-1);
+ /* if the CCR never cleared, the previous command
+ didn't finish within the "reasonable time" */
+ if (i == 100)
+ return -1;
- /* Issue the new command */
- cy_writeb(base_addr+(CyCCR<<index), cmd);
+ /* Issue the new command */
+ cy_writeb(base_addr + (CyCCR << index), cmd);
- return(0);
-} /* cyy_issue_cmd */
+ return 0;
+} /* cyy_issue_cmd */
#ifdef CONFIG_ISA
/* ISA interrupt detection code */
-static unsigned
-detect_isa_irq(void __iomem *address)
+static unsigned detect_isa_irq(void __iomem * address)
{
- int irq;
- unsigned long irqs, flags;
- int save_xir, save_car;
- int index = 0; /* IRQ probing is only for ISA */
-
- /* forget possible initially masked and pending IRQ */
- irq = probe_irq_off(probe_irq_on());
-
- /* Clear interrupts on the board first */
- cy_writeb(address + (Cy_ClrIntr<<index), 0);
- /* Cy_ClrIntr is 0x1800 */
-
- irqs = probe_irq_on();
- /* Wait ... */
- udelay(5000L);
-
- /* Enable the Tx interrupts on the CD1400 */
- local_irq_save(flags);
- cy_writeb(address + (CyCAR<<index), 0);
- cyy_issue_cmd(address, CyCHAN_CTL|CyENB_XMTR, index);
-
- cy_writeb(address + (CyCAR<<index), 0);
- cy_writeb(address + (CySRER<<index),
- cy_readb(address + (CySRER<<index)) | CyTxRdy);
- local_irq_restore(flags);
-
- /* Wait ... */
- udelay(5000L);
-
- /* Check which interrupt is in use */
- irq = probe_irq_off(irqs);
-
- /* Clean up */
- save_xir = (u_char) cy_readb(address + (CyTIR<<index));
- save_car = cy_readb(address + (CyCAR<<index));
- cy_writeb(address + (CyCAR<<index), (save_xir & 0x3));
- cy_writeb(address + (CySRER<<index),
- cy_readb(address + (CySRER<<index)) & ~CyTxRdy);
- cy_writeb(address + (CyTIR<<index), (save_xir & 0x3f));
- cy_writeb(address + (CyCAR<<index), (save_car));
- cy_writeb(address + (Cy_ClrIntr<<index), 0);
- /* Cy_ClrIntr is 0x1800 */
-
- return (irq > 0)? irq : 0;
+ int irq;
+ unsigned long irqs, flags;
+ int save_xir, save_car;
+ int index = 0; /* IRQ probing is only for ISA */
+
+ /* forget possible initially masked and pending IRQ */
+ irq = probe_irq_off(probe_irq_on());
+
+ /* Clear interrupts on the board first */
+ cy_writeb(address + (Cy_ClrIntr << index), 0);
+ /* Cy_ClrIntr is 0x1800 */
+
+ irqs = probe_irq_on();
+ /* Wait ... */
+ udelay(5000L);
+
+ /* Enable the Tx interrupts on the CD1400 */
+ local_irq_save(flags);
+ cy_writeb(address + (CyCAR << index), 0);
+ cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
+
+ cy_writeb(address + (CyCAR << index), 0);
+ cy_writeb(address + (CySRER << index),
+ cy_readb(address + (CySRER << index)) | CyTxRdy);
+ local_irq_restore(flags);
+
+ /* Wait ... */
+ udelay(5000L);
+
+ /* Check which interrupt is in use */
+ irq = probe_irq_off(irqs);
+
+ /* Clean up */
+ save_xir = (u_char) cy_readb(address + (CyTIR << index));
+ save_car = cy_readb(address + (CyCAR << index));
+ cy_writeb(address + (CyCAR << index), (save_xir & 0x3));
+ cy_writeb(address + (CySRER << index),
+ cy_readb(address + (CySRER << index)) & ~CyTxRdy);
+ cy_writeb(address + (CyTIR << index), (save_xir & 0x3f));
+ cy_writeb(address + (CyCAR << index), (save_car));
+ cy_writeb(address + (Cy_ClrIntr << index), 0);
+ /* Cy_ClrIntr is 0x1800 */
+
+ return (irq > 0) ? irq : 0;
}
-#endif /* CONFIG_ISA */
+#endif /* CONFIG_ISA */
-/* The real interrupt service routine is called
- whenever the card wants its hand held--chars
- received, out buffer empty, modem change, etc.
- */
-static irqreturn_t
-cyy_interrupt(int irq, void *dev_id)
+static void cyy_intr_chip(struct cyclades_card *cinfo, int chip,
+ void __iomem * base_addr, int status, int index)
{
- struct tty_struct *tty;
- int status;
- struct cyclades_card *cinfo;
- struct cyclades_port *info;
- void __iomem *base_addr, *card_base_addr;
- int chip;
- int save_xir, channel, save_car;
- char data;
- volatile int char_count;
- int outch;
- int i,j,index;
- int too_many;
- int had_work;
- int mdm_change;
- int mdm_status;
- int len;
- if((cinfo = (struct cyclades_card *)dev_id) == 0){
-#ifdef CY_DEBUG_INTERRUPTS
- printk("cyy_interrupt: spurious interrupt %d\n\r", irq);
-#endif
- return IRQ_NONE; /* spurious interrupt */
- }
-
- card_base_addr = cinfo->base_addr;
- index = cinfo->bus_index;
-
-
- /* This loop checks all chips in the card. Make a note whenever
- _any_ chip had some work to do, as this is considered an
- indication that there will be more to do. Only when no chip
- has any work does this outermost loop exit.
- */
- do{
- had_work = 0;
- for ( chip = 0 ; chip < cinfo->num_chips ; chip ++) {
- base_addr = cinfo->base_addr + (cy_chip_offset[chip]<<index);
- too_many = 0;
- while ( (status = cy_readb(base_addr+(CySVRR<<index))) != 0x00) {
- had_work++;
- /* The purpose of the following test is to ensure that
- no chip can monopolize the driver. This forces the
- chips to be checked in a round-robin fashion (after
- draining each of a bunch (1000) of characters).
- */
- if(1000<too_many++){
- break;
- }
- if (status & CySRReceive) { /* reception interrupt */
+ struct cyclades_port *info;
+ struct tty_struct *tty;
+ volatile int char_count;
+ int i, j, len, mdm_change, mdm_status, outch;
+ int save_xir, channel, save_car;
+ char data;
+
+ if (status & CySRReceive) { /* reception interrupt */
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyy_interrupt: rcvd intr, chip %d\n\r", chip);
+ printk("cyy_interrupt: rcvd intr, chip %d\n\r", chip);
#endif
- /* determine the channel & change to that context */
- spin_lock(&cinfo->card_lock);
- save_xir = (u_char) cy_readb(base_addr+(CyRIR<<index));
- channel = (u_short ) (save_xir & CyIRChannel);
- i = channel + chip * 4 + cinfo->first_line;
- info = &cy_port[i];
- info->last_active = jiffies;
- save_car = cy_readb(base_addr+(CyCAR<<index));
- cy_writeb(base_addr+(CyCAR<<index), save_xir);
-
- /* if there is nowhere to put the data, discard it */
- if(info->tty == 0){
- j = (cy_readb(base_addr+(CyRIVR<<index)) & CyIVRMask);
- if ( j == CyIVRRxEx ) { /* exception */
- data = cy_readb(base_addr+(CyRDSR<<index));
- } else { /* normal character reception */
- char_count = cy_readb(base_addr+(CyRDCR<<index));
- while(char_count--){
- data = cy_readb(base_addr+(CyRDSR<<index));
- }
- }
- }else{ /* there is an open port for this data */
- tty = info->tty;
- j = (cy_readb(base_addr+(CyRIVR<<index)) & CyIVRMask);
- if ( j == CyIVRRxEx ) { /* exception */
- data = cy_readb(base_addr+(CyRDSR<<index));
-
- /* For statistics only */
- if (data & CyBREAK)
- info->icount.brk++;
- else if(data & CyFRAME)
- info->icount.frame++;
- else if(data & CyPARITY)
- info->icount.parity++;
- else if(data & CyOVERRUN)
- info->icount.overrun++;
-
- if(data & info->ignore_status_mask){
- info->icount.rx++;
- continue;
- }
- if (tty_buffer_request_room(tty, 1)) {
- if (data & info->read_status_mask){
- if(data & CyBREAK){
- tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<<index)), TTY_BREAK);
- info->icount.rx++;
- if (info->flags & ASYNC_SAK){
- do_SAK(tty);
- }
- }else if(data & CyFRAME){
- tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<<index)), TTY_FRAME);
- info->icount.rx++;
- info->idle_stats.frame_errs++;
- }else if(data & CyPARITY){
- /* Pieces of seven... */
- tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<<index)), TTY_PARITY);
- info->icount.rx++;
- info->idle_stats.parity_errs++;
- }else if(data & CyOVERRUN){
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ /* determine the channel & change to that context */
+ spin_lock(&cinfo->card_lock);
+ save_xir = (u_char) cy_readb(base_addr + (CyRIR << index));
+ channel = (u_short) (save_xir & CyIRChannel);
+ i = channel + chip * 4 + cinfo->first_line;
+ info = &cy_port[i];
+ info->last_active = jiffies;
+ save_car = cy_readb(base_addr + (CyCAR << index));
+ cy_writeb(base_addr + (CyCAR << index), save_xir);
+
+ /* if there is nowhere to put the data, discard it */
+ if (info->tty == 0) {
+ j = (cy_readb(base_addr + (CyRIVR << index)) &
+ CyIVRMask);
+ if (j == CyIVRRxEx) { /* exception */
+ data = cy_readb(base_addr + (CyRDSR << index));
+ } else { /* normal character reception */
+ char_count = cy_readb(base_addr +
+ (CyRDCR << index));
+ while (char_count--) {
+ data = cy_readb(base_addr +
+ (CyRDSR << index));
+ }
+ }
+ } else { /* there is an open port for this data */
+ tty = info->tty;
+ j = (cy_readb(base_addr + (CyRIVR << index)) &
+ CyIVRMask);
+ if (j == CyIVRRxEx) { /* exception */
+ data = cy_readb(base_addr + (CyRDSR << index));
+
+ /* For statistics only */
+ if (data & CyBREAK)
+ info->icount.brk++;
+ else if (data & CyFRAME)
+ info->icount.frame++;
+ else if (data & CyPARITY)
+ info->icount.parity++;
+ else if (data & CyOVERRUN)
+ info->icount.overrun++;
+
+ if (data & info->ignore_status_mask) {
info->icount.rx++;
- /* If the flip buffer itself is
- overflowing, we still lose
- the next incoming character.
- */
- tty_insert_flip_char(tty, cy_readb(base_addr+(CyRDSR<<index)), TTY_FRAME);
- info->icount.rx++;
+ return;
+ }
+ if (tty_buffer_request_room(tty, 1)) {
+ if (data & info->read_status_mask) {
+ if (data & CyBREAK) {
+ tty_insert_flip_char(
+ tty,
+ cy_readb(
+ base_addr +
+ (CyRDSR <<
+ index)),
+ TTY_BREAK);
+ info->icount.rx++;
+ if (info->flags &
+ ASYNC_SAK) {
+ do_SAK(tty);
+ }
+ } else if (data & CyFRAME) {
+ tty_insert_flip_char(
+ tty,
+ cy_readb(
+ base_addr +
+ (CyRDSR <<
+ index)),
+ TTY_FRAME);
+ info->icount.rx++;
+ info->idle_stats.
+ frame_errs++;
+ } else if (data & CyPARITY) {
+ /* Pieces of seven... */
+ tty_insert_flip_char(
+ tty,
+ cy_readb(
+ base_addr +
+ (CyRDSR <<
+ index)),
+ TTY_PARITY);
+ info->icount.rx++;
+ info->idle_stats.
+ parity_errs++;
+ } else if (data & CyOVERRUN) {
+ tty_insert_flip_char(
+ tty, 0,
+ TTY_OVERRUN);
+ info->icount.rx++;
+ /* If the flip buffer itself is
+ overflowing, we still lose
+ the next incoming character.
+ */
+ tty_insert_flip_char(
+ tty,
+ cy_readb(
+ base_addr +
+ (CyRDSR <<
+ index)),
+ TTY_FRAME);
+ info->icount.rx++;
+ info->idle_stats.
+ overruns++;
+ /* These two conditions may imply */
+ /* a normal read should be done. */
+ /* }else if(data & CyTIMEOUT){ */
+ /* }else if(data & CySPECHAR){ */
+ } else {
+ tty_insert_flip_char(
+ tty, 0,
+ TTY_NORMAL);
+ info->icount.rx++;
+ }
+ } else {
+ tty_insert_flip_char(tty, 0,
+ TTY_NORMAL);
+ info->icount.rx++;
+ }
+ } else {
+ /* there was a software buffer
+ overrun and nothing could be
+ done about it!!! */
+ info->icount.buf_overrun++;
info->idle_stats.overruns++;
- /* These two conditions may imply */
- /* a normal read should be done. */
- /* }else if(data & CyTIMEOUT){ */
- /* }else if(data & CySPECHAR){ */
- }else {
- tty_insert_flip_char(tty, 0, TTY_NORMAL);
- info->icount.rx++;
- }
- }else{
- tty_insert_flip_char(tty, 0, TTY_NORMAL);
- info->icount.rx++;
- }
- }else{
- /* there was a software buffer
- overrun and nothing could be
- done about it!!! */
- info->icount.buf_overrun++;
- info->idle_stats.overruns++;
- }
- } else { /* normal character reception */
- /* load # chars available from the chip */
- char_count = cy_readb(base_addr+(CyRDCR<<index));
+ }
+ } else { /* normal character reception */
+ /* load # chars available from the chip */
+ char_count = cy_readb(base_addr +
+ (CyRDCR << index));
#ifdef CY_ENABLE_MONITORING
- ++info->mon.int_count;
- info->mon.char_count += char_count;
- if (char_count > info->mon.char_max)
- info->mon.char_max = char_count;
- info->mon.char_last = char_count;
+ ++info->mon.int_count;
+ info->mon.char_count += char_count;
+ if (char_count > info->mon.char_max)
+ info->mon.char_max = char_count;
+ info->mon.char_last = char_count;
#endif
- len = tty_buffer_request_room(tty, char_count);
- while(len--){
- data = cy_readb(base_addr+(CyRDSR<<index));
- tty_insert_flip_char(tty, data, TTY_NORMAL);
- info->idle_stats.recv_bytes++;
- info->icount.rx++;
+ len = tty_buffer_request_room(tty, char_count);
+ while (len--) {
+ data = cy_readb(base_addr +
+ (CyRDSR << index));
+ tty_insert_flip_char(tty, data,
+ TTY_NORMAL);
+ info->idle_stats.recv_bytes++;
+ info->icount.rx++;
#ifdef CY_16Y_HACK
- udelay(10L);
+ udelay(10L);
#endif
- }
- info->idle_stats.recv_idle = jiffies;
- }
+ }
+ info->idle_stats.recv_idle = jiffies;
+ }
tty_schedule_flip(tty);
- }
- /* end of service */
- cy_writeb(base_addr+(CyRIR<<index), (save_xir & 0x3f));
- cy_writeb(base_addr+(CyCAR<<index), (save_car));
- spin_unlock(&cinfo->card_lock);
- }
-
-
- if (status & CySRTransmit) { /* transmission interrupt */
- /* Since we only get here when the transmit buffer
- is empty, we know we can always stuff a dozen
- characters. */
+ }
+ /* end of service */
+ cy_writeb(base_addr + (CyRIR << index), (save_xir & 0x3f));
+ cy_writeb(base_addr + (CyCAR << index), (save_car));
+ spin_unlock(&cinfo->card_lock);
+ }
+
+ if (status & CySRTransmit) { /* transmission interrupt */
+ /* Since we only get here when the transmit buffer
+ is empty, we know we can always stuff a dozen
+ characters. */
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyy_interrupt: xmit intr, chip %d\n\r", chip);
+ printk("cyy_interrupt: xmit intr, chip %d\n\r", chip);
#endif
- /* determine the channel & change to that context */
- spin_lock(&cinfo->card_lock);
- save_xir = (u_char) cy_readb(base_addr+(CyTIR<<index));
- channel = (u_short ) (save_xir & CyIRChannel);
- i = channel + chip * 4 + cinfo->first_line;
- save_car = cy_readb(base_addr+(CyCAR<<index));
- cy_writeb(base_addr+(CyCAR<<index), save_xir);
-
- /* validate the port# (as configured and open) */
- if( (i < 0) || (NR_PORTS <= i) ){
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) & ~CyTxRdy);
- goto txend;
- }
- info = &cy_port[i];
- info->last_active = jiffies;
- if(info->tty == 0){
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) & ~CyTxRdy);
- goto txdone;
- }
-
- /* load the on-chip space for outbound data */
- char_count = info->xmit_fifo_size;
-
- if(info->x_char) { /* send special char */
- outch = info->x_char;
- cy_writeb(base_addr+(CyTDR<<index), outch);
- char_count--;
+ /* determine the channel & change to that context */
+ spin_lock(&cinfo->card_lock);
+ save_xir = (u_char) cy_readb(base_addr + (CyTIR << index));
+ channel = (u_short) (save_xir & CyIRChannel);
+ i = channel + chip * 4 + cinfo->first_line;
+ save_car = cy_readb(base_addr + (CyCAR << index));
+ cy_writeb(base_addr + (CyCAR << index), save_xir);
+
+ /* validate the port# (as configured and open) */
+ if ((i < 0) || (NR_PORTS <= i)) {
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr + (CySRER << index)) &
+ ~CyTxRdy);
+ goto txend;
+ }
+ info = &cy_port[i];
+ info->last_active = jiffies;
+ if (info->tty == 0) {
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr + (CySRER << index)) &
+ ~CyTxRdy);
+ goto txdone;
+ }
+
+ /* load the on-chip space for outbound data */
+ char_count = info->xmit_fifo_size;
+
+ if (info->x_char) { /* send special char */
+ outch = info->x_char;
+ cy_writeb(base_addr + (CyTDR << index), outch);
+ char_count--;
info->icount.tx++;
- info->x_char = 0;
- }
+ info->x_char = 0;
+ }
- if (info->breakon || info->breakoff) {
+ if (info->breakon || info->breakoff) {
if (info->breakon) {
- cy_writeb(base_addr + (CyTDR<<index), 0);
- cy_writeb(base_addr + (CyTDR<<index), 0x81);
- info->breakon = 0;
- char_count -= 2;
+ cy_writeb(base_addr + (CyTDR << index), 0);
+ cy_writeb(base_addr + (CyTDR << index), 0x81);
+ info->breakon = 0;
+ char_count -= 2;
}
if (info->breakoff) {
- cy_writeb(base_addr + (CyTDR<<index), 0);
- cy_writeb(base_addr + (CyTDR<<index), 0x83);
- info->breakoff = 0;
- char_count -= 2;
+ cy_writeb(base_addr + (CyTDR << index), 0);
+ cy_writeb(base_addr + (CyTDR << index), 0x83);
+ info->breakoff = 0;
+ char_count -= 2;
}
- }
-
- while (char_count-- > 0){
- if (!info->xmit_cnt){
- if (cy_readb(base_addr+(CySRER<<index))&CyTxMpty) {
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) &
- ~CyTxMpty);
- } else {
- cy_writeb(base_addr+(CySRER<<index),
- ((cy_readb(base_addr+(CySRER<<index))
- & ~CyTxRdy)
- | CyTxMpty));
- }
- goto txdone;
+ }
+
+ while (char_count-- > 0) {
+ if (!info->xmit_cnt) {
+ if (cy_readb(base_addr + (CySRER << index)) &
+ CyTxMpty) {
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr +
+ (CySRER << index)) &
+ ~CyTxMpty);
+ } else {
+ cy_writeb(base_addr + (CySRER << index),
+ (cy_readb(base_addr +
+ (CySRER << index)) &
+ ~CyTxRdy) | CyTxMpty);
+ }
+ goto txdone;
}
- if (info->xmit_buf == 0){
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) &
+ if (info->xmit_buf == 0) {
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr + (CySRER << index))&
~CyTxRdy);
- goto txdone;
+ goto txdone;
}
- if (info->tty->stopped || info->tty->hw_stopped){
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) &
+ if (info->tty->stopped || info->tty->hw_stopped) {
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr + (CySRER << index))&
~CyTxRdy);
- goto txdone;
+ goto txdone;
}
- /* Because the Embedded Transmit Commands have
- been enabled, we must check to see if the
+ /* Because the Embedded Transmit Commands have
+ been enabled, we must check to see if the
escape character, NULL, is being sent. If it
is, we must ensure that there is room for it
to be doubled in the output stream. Therefore
after the check for a NULL output character.
This is necessary because there may not be
room for the two chars needed to send a NULL.)
- */
- outch = info->xmit_buf[info->xmit_tail];
- if( outch ){
- info->xmit_cnt--;
- info->xmit_tail = (info->xmit_tail + 1)
- & (SERIAL_XMIT_SIZE - 1);
- cy_writeb(base_addr+(CyTDR<<index), outch);
- info->icount.tx++;
- }else{
- if(char_count > 1){
- info->xmit_cnt--;
- info->xmit_tail = (info->xmit_tail + 1)
- & (SERIAL_XMIT_SIZE - 1);
- cy_writeb(base_addr+(CyTDR<<index),
- outch);
- cy_writeb(base_addr+(CyTDR<<index), 0);
+ */
+ outch = info->xmit_buf[info->xmit_tail];
+ if (outch) {
+ info->xmit_cnt--;
+ info->xmit_tail = (info->xmit_tail + 1) &
+ (SERIAL_XMIT_SIZE - 1);
+ cy_writeb(base_addr + (CyTDR << index), outch);
info->icount.tx++;
- char_count--;
- }else{
- }
- }
- }
-
- txdone:
- if (info->xmit_cnt < WAKEUP_CHARS) {
- cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
- }
- txend:
- /* end of service */
- cy_writeb(base_addr+(CyTIR<<index),
- (save_xir & 0x3f));
- cy_writeb(base_addr+(CyCAR<<index), (save_car));
- spin_unlock(&cinfo->card_lock);
- }
-
- if (status & CySRModem) { /* modem interrupt */
-
- /* determine the channel & change to that context */
- spin_lock(&cinfo->card_lock);
- save_xir = (u_char) cy_readb(base_addr+(CyMIR<<index));
- channel = (u_short ) (save_xir & CyIRChannel);
- info = &cy_port[channel + chip * 4
- + cinfo->first_line];
- info->last_active = jiffies;
- save_car = cy_readb(base_addr+(CyCAR<<index));
- cy_writeb(base_addr+(CyCAR<<index), save_xir);
-
- mdm_change = cy_readb(base_addr+(CyMISR<<index));
- mdm_status = cy_readb(base_addr+(CyMSVR1<<index));
-
- if(info->tty == 0){/* no place for data, ignore it*/
- ;
- }else{
+ } else {
+ if (char_count > 1) {
+ info->xmit_cnt--;
+ info->xmit_tail = (info->xmit_tail + 1)&
+ (SERIAL_XMIT_SIZE - 1);
+ cy_writeb(base_addr + (CyTDR << index),
+ outch);
+ cy_writeb(base_addr + (CyTDR << index),
+ 0);
+ info->icount.tx++;
+ char_count--;
+ } else {
+ }
+ }
+ }
+
+txdone:
+ if (info->xmit_cnt < WAKEUP_CHARS) {
+ cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
+ }
+txend:
+ /* end of service */
+ cy_writeb(base_addr + (CyTIR << index), (save_xir & 0x3f));
+ cy_writeb(base_addr + (CyCAR << index), (save_car));
+ spin_unlock(&cinfo->card_lock);
+ }
+
+ if (status & CySRModem) { /* modem interrupt */
+
+ /* determine the channel & change to that context */
+ spin_lock(&cinfo->card_lock);
+ save_xir = (u_char) cy_readb(base_addr + (CyMIR << index));
+ channel = (u_short) (save_xir & CyIRChannel);
+ info = &cy_port[channel + chip * 4 + cinfo->first_line];
+ info->last_active = jiffies;
+ save_car = cy_readb(base_addr + (CyCAR << index));
+ cy_writeb(base_addr + (CyCAR << index), save_xir);
+
+ mdm_change = cy_readb(base_addr + (CyMISR << index));
+ mdm_status = cy_readb(base_addr + (CyMSVR1 << index));
+
+ if (info->tty == 0) { /* no place for data, ignore it */
+ ;
+ } else {
if (mdm_change & CyANY_DELTA) {
- /* For statistics only */
- if (mdm_change & CyDCD) info->icount.dcd++;
- if (mdm_change & CyCTS) info->icount.cts++;
- if (mdm_change & CyDSR) info->icount.dsr++;
- if (mdm_change & CyRI) info->icount.rng++;
+ /* For statistics only */
+ if (mdm_change & CyDCD)
+ info->icount.dcd++;
+ if (mdm_change & CyCTS)
+ info->icount.cts++;
+ if (mdm_change & CyDSR)
+ info->icount.dsr++;
+ if (mdm_change & CyRI)
+ info->icount.rng++;
+
+ cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP);
+ }
+
+ if ((mdm_change & CyDCD) &&
+ (info->flags & ASYNC_CHECK_CD)) {
+ if (mdm_status & CyDCD) {
+ cy_sched_event(info,
+ Cy_EVENT_OPEN_WAKEUP);
+ } else {
+ cy_sched_event(info, Cy_EVENT_HANGUP);
+ }
+ }
+ if ((mdm_change & CyCTS) &&
+ (info->flags & ASYNC_CTS_FLOW)) {
+ if (info->tty->hw_stopped) {
+ if (mdm_status & CyCTS) {
+ /* cy_start isn't used
+ because... !!! */
+ info->tty->hw_stopped = 0;
+ cy_writeb(base_addr +
+ (CySRER << index),
+ cy_readb(base_addr +
+ (CySRER <<
+ index))|
+ CyTxRdy);
+ cy_sched_event(info,
+ Cy_EVENT_WRITE_WAKEUP);
+ }
+ } else {
+ if (!(mdm_status & CyCTS)) {
+ /* cy_stop isn't used
+ because ... !!! */
+ info->tty->hw_stopped = 1;
+ cy_writeb(base_addr +
+ (CySRER << index),
+ cy_readb(base_addr +
+ (CySRER <<
+ index)) &
+ ~CyTxRdy);
+ }
+ }
+ }
+ if (mdm_change & CyDSR) {
+ }
+ if (mdm_change & CyRI) {
+ }
+ }
+ /* end of service */
+ cy_writeb(base_addr + (CyMIR << index), (save_xir & 0x3f));
+ cy_writeb(base_addr + (CyCAR << index), save_car);
+ spin_unlock(&cinfo->card_lock);
+ }
+}
- cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP);
+/* The real interrupt service routine is called
+ whenever the card wants its hand held--chars
+ received, out buffer empty, modem change, etc.
+ */
+static irqreturn_t cyy_interrupt(int irq, void *dev_id)
+{
+ int status;
+ struct cyclades_card *cinfo;
+ void __iomem *base_addr, *card_base_addr;
+ int chip;
+ int index;
+ int too_many;
+ int had_work;
+
+ if ((cinfo = (struct cyclades_card *)dev_id) == 0) {
+#ifdef CY_DEBUG_INTERRUPTS
+ printk("cyy_interrupt: spurious interrupt %d\n\r", irq);
+#endif
+ return IRQ_NONE; /* spurious interrupt */
+ }
+
+ card_base_addr = cinfo->base_addr;
+ index = cinfo->bus_index;
+
+ /* This loop checks all chips in the card. Make a note whenever
+ _any_ chip had some work to do, as this is considered an
+ indication that there will be more to do. Only when no chip
+ has any work does this outermost loop exit.
+ */
+ do {
+ had_work = 0;
+ for (chip = 0; chip < cinfo->num_chips; chip++) {
+ base_addr = cinfo->base_addr +
+ (cy_chip_offset[chip] << index);
+ too_many = 0;
+ while ((status = cy_readb(base_addr +
+ (CySVRR << index))) != 0x00) {
+ had_work++;
+ /* The purpose of the following test is to ensure that
+ no chip can monopolize the driver. This forces the
+ chips to be checked in a round-robin fashion (after
+ draining each of a bunch (1000) of characters).
+ */
+ if (1000 < too_many++) {
+ break;
+ }
+ cyy_intr_chip(cinfo, chip, base_addr, status,
+ index);
}
+ }
+ } while (had_work);
- if((mdm_change & CyDCD)
- && (info->flags & ASYNC_CHECK_CD)){
- if(mdm_status & CyDCD){
- cy_sched_event(info,
- Cy_EVENT_OPEN_WAKEUP);
- }else{
- cy_sched_event(info,
- Cy_EVENT_HANGUP);
- }
- }
- if((mdm_change & CyCTS)
- && (info->flags & ASYNC_CTS_FLOW)){
- if(info->tty->hw_stopped){
- if(mdm_status & CyCTS){
- /* cy_start isn't used
- because... !!! */
- info->tty->hw_stopped = 0;
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) |
- CyTxRdy);
- cy_sched_event(info,
- Cy_EVENT_WRITE_WAKEUP);
- }
- }else{
- if(!(mdm_status & CyCTS)){
- /* cy_stop isn't used
- because ... !!! */
- info->tty->hw_stopped = 1;
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) &
- ~CyTxRdy);
- }
- }
- }
- if(mdm_change & CyDSR){
- }
- if(mdm_change & CyRI){
- }
- }
- /* end of service */
- cy_writeb(base_addr+(CyMIR<<index),
- (save_xir & 0x3f));
- cy_writeb(base_addr+(CyCAR<<index), save_car);
- spin_unlock(&cinfo->card_lock);
- }
- } /* end while status != 0 */
- } /* end loop for chips... */
- } while(had_work);
-
- /* clear interrupts */
- spin_lock(&cinfo->card_lock);
- cy_writeb(card_base_addr + (Cy_ClrIntr<<index), 0);
- /* Cy_ClrIntr is 0x1800 */
- spin_unlock(&cinfo->card_lock);
- return IRQ_HANDLED;
-} /* cyy_interrupt */
+ /* clear interrupts */
+ spin_lock(&cinfo->card_lock);
+ cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0);
+ /* Cy_ClrIntr is 0x1800 */
+ spin_unlock(&cinfo->card_lock);
+ return IRQ_HANDLED;
+} /* cyy_interrupt */
/***********************************************************/
/********* End of block of Cyclom-Y specific code **********/
/***********************************************************/
static int
-cyz_fetch_msg( struct cyclades_card *cinfo,
- uclong *channel, ucchar *cmd, uclong *param)
+cyz_fetch_msg(struct cyclades_card *cinfo,
+ uclong * channel, ucchar * cmd, uclong * param)
{
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- unsigned long loc_doorbell;
-
- firm_id = cinfo->base_addr + ID_ADDRESS;
- if (!ISZLOADED(*cinfo)){
- return (-1);
- }
- zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
-
- loc_doorbell = cy_readl(&((struct RUNTIME_9060 __iomem *)
- (cinfo->ctl_addr))->loc_doorbell);
- if (loc_doorbell){
- *cmd = (char)(0xff & loc_doorbell);
- *channel = cy_readl(&board_ctrl->fwcmd_channel);
- *param = (uclong)cy_readl(&board_ctrl->fwcmd_param);
- cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->loc_doorbell,
- 0xffffffff);
- return 1;
- }
- return 0;
-} /* cyz_fetch_msg */
+ struct FIRM_ID __iomem *firm_id;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+ unsigned long loc_doorbell;
+
+ firm_id = cinfo->base_addr + ID_ADDRESS;
+ if (!ISZLOADED(*cinfo)) {
+ return -1;
+ }
+ zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) &
+ 0xfffff);
+ board_ctrl = &zfw_ctrl->board_ctrl;
+
+ loc_doorbell = cy_readl(&((struct RUNTIME_9060 __iomem *)
+ (cinfo->ctl_addr))->loc_doorbell);
+ if (loc_doorbell) {
+ *cmd = (char)(0xff & loc_doorbell);
+ *channel = cy_readl(&board_ctrl->fwcmd_channel);
+ *param = (uclong) cy_readl(&board_ctrl->fwcmd_param);
+ cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
+ loc_doorbell, 0xffffffff);
+ return 1;
+ }
+ return 0;
+} /* cyz_fetch_msg */
static int
-cyz_issue_cmd( struct cyclades_card *cinfo,
- uclong channel, ucchar cmd, uclong param)
+cyz_issue_cmd(struct cyclades_card *cinfo,
+ uclong channel, ucchar cmd, uclong param)
{
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- unsigned long __iomem *pci_doorbell;
- int index;
-
- firm_id = cinfo->base_addr + ID_ADDRESS;
- if (!ISZLOADED(*cinfo)){
- return (-1);
- }
- zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
-
- index = 0;
- pci_doorbell = &((struct RUNTIME_9060 __iomem *) (cinfo->ctl_addr))->pci_doorbell;
- while( (cy_readl(pci_doorbell) & 0xff) != 0){
- if (index++ == 1000){
- return((int)(cy_readl(pci_doorbell) & 0xff));
- }
- udelay(50L);
- }
- cy_writel(&board_ctrl->hcmd_channel, channel);
- cy_writel(&board_ctrl->hcmd_param , param);
- cy_writel(pci_doorbell, (long)cmd);
-
- return(0);
-} /* cyz_issue_cmd */
+ struct FIRM_ID __iomem *firm_id;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+ unsigned long __iomem *pci_doorbell;
+ int index;
+
+ firm_id = cinfo->base_addr + ID_ADDRESS;
+ if (!ISZLOADED(*cinfo)) {
+ return -1;
+ }
+ zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) &
+ 0xfffff);
+ board_ctrl = &zfw_ctrl->board_ctrl;
+
+ index = 0;
+ pci_doorbell =
+ &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell;
+ while ((cy_readl(pci_doorbell) & 0xff) != 0) {
+ if (index++ == 1000) {
+ return (int)(cy_readl(pci_doorbell) & 0xff);
+ }
+ udelay(50L);
+ }
+ cy_writel(&board_ctrl->hcmd_channel, channel);
+ cy_writel(&board_ctrl->hcmd_param, param);
+ cy_writel(pci_doorbell, (long)cmd);
+
+ return 0;
+} /* cyz_issue_cmd */
static void
cyz_handle_rx(struct cyclades_port *info,
- volatile struct CH_CTRL __iomem *ch_ctrl,
- volatile struct BUF_CTRL __iomem *buf_ctrl)
+ volatile struct CH_CTRL __iomem * ch_ctrl,
+ volatile struct BUF_CTRL __iomem * buf_ctrl)
{
- struct cyclades_card *cinfo = &cy_card[info->card];
- struct tty_struct *tty = info->tty;
- volatile int char_count;
- int len;
+ struct cyclades_card *cinfo = &cy_card[info->card];
+ struct tty_struct *tty = info->tty;
+ volatile int char_count;
+ int len;
#ifdef BLOCKMOVE
- int small_count;
+ int small_count;
#else
- char data;
+ char data;
#endif
- volatile uclong rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr;
+ volatile uclong rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr;
- rx_get = new_rx_get = cy_readl(&buf_ctrl->rx_get);
- rx_put = cy_readl(&buf_ctrl->rx_put);
- rx_bufsize = cy_readl(&buf_ctrl->rx_bufsize);
- rx_bufaddr = cy_readl(&buf_ctrl->rx_bufaddr);
- if (rx_put >= rx_get)
- char_count = rx_put - rx_get;
- else
- char_count = rx_put - rx_get + rx_bufsize;
+ rx_get = new_rx_get = cy_readl(&buf_ctrl->rx_get);
+ rx_put = cy_readl(&buf_ctrl->rx_put);
+ rx_bufsize = cy_readl(&buf_ctrl->rx_bufsize);
+ rx_bufaddr = cy_readl(&buf_ctrl->rx_bufaddr);
+ if (rx_put >= rx_get)
+ char_count = rx_put - rx_get;
+ else
+ char_count = rx_put - rx_get + rx_bufsize;
- if ( char_count ) {
- info->last_active = jiffies;
- info->jiffies[1] = jiffies;
+ if (char_count) {
+ info->last_active = jiffies;
+ info->jiffies[1] = jiffies;
#ifdef CY_ENABLE_MONITORING
- info->mon.int_count++;
- info->mon.char_count += char_count;
- if (char_count > info->mon.char_max)
- info->mon.char_max = char_count;
- info->mon.char_last = char_count;
+ info->mon.int_count++;
+ info->mon.char_count += char_count;
+ if (char_count > info->mon.char_max)
+ info->mon.char_max = char_count;
+ info->mon.char_last = char_count;
#endif
- if(tty == 0){
- /* flush received characters */
- new_rx_get = (new_rx_get + char_count) & (rx_bufsize - 1);
- info->rflush_count++;
- }else{
+ if (tty == 0) {
+ /* flush received characters */
+ new_rx_get = (new_rx_get + char_count) &
+ (rx_bufsize - 1);
+ info->rflush_count++;
+ } else {
#ifdef BLOCKMOVE
- /* we'd like to use memcpy(t, f, n) and memset(s, c, count)
- for performance, but because of buffer boundaries, there
- may be several steps to the operation */
- while(0 < (small_count =
- min_t(unsigned int, (rx_bufsize - new_rx_get),
- min_t(unsigned int, (TTY_FLIPBUF_SIZE - tty->flip.count), char_count))
- )) {
- memcpy_fromio(tty->flip.char_buf_ptr,
- (char *)(cinfo->base_addr
- + rx_bufaddr + new_rx_get),
- small_count);
-
- tty->flip.char_buf_ptr += small_count;
- memset(tty->flip.flag_buf_ptr, TTY_NORMAL, small_count);
- tty->flip.flag_buf_ptr += small_count;
- new_rx_get = (new_rx_get + small_count) & (rx_bufsize - 1);
- char_count -= small_count;
- info->icount.rx += small_count;
- info->idle_stats.recv_bytes += small_count;
- tty->flip.count += small_count;
- }
+ /* we'd like to use memcpy(t, f, n) and memset(s, c, count)
+ for performance, but because of buffer boundaries, there
+ may be several steps to the operation */
+ while (0 < (small_count = min_t(unsigned int,
+ rx_bufsize - new_rx_get,
+ min_t(unsigned int, TTY_FLIPBUF_SIZE -
+ tty->flip.count, char_count)))){
+ memcpy_fromio(tty->flip.char_buf_ptr,
+ (char *)(cinfo->base_addr + rx_bufaddr +
+ new_rx_get),
+ small_count);
+
+ tty->flip.char_buf_ptr += small_count;
+ memset(tty->flip.flag_buf_ptr, TTY_NORMAL,
+ small_count);
+ tty->flip.flag_buf_ptr += small_count;
+ new_rx_get = (new_rx_get + small_count) &
+ (rx_bufsize - 1);
+ char_count -= small_count;
+ info->icount.rx += small_count;
+ info->idle_stats.recv_bytes += small_count;
+ tty->flip.count += small_count;
+ }
#else
- len = tty_buffer_request_room(tty, char_count);
- while(len--){
- data = cy_readb(cinfo->base_addr + rx_bufaddr + new_rx_get);
- new_rx_get = (new_rx_get + 1) & (rx_bufsize - 1);
- tty_insert_flip_char(tty, data, TTY_NORMAL);
- info->idle_stats.recv_bytes++;
- info->icount.rx++;
- }
+ len = tty_buffer_request_room(tty, char_count);
+ while (len--) {
+ data = cy_readb(cinfo->base_addr + rx_bufaddr +
+ new_rx_get);
+ new_rx_get = (new_rx_get + 1)& (rx_bufsize - 1);
+ tty_insert_flip_char(tty, data, TTY_NORMAL);
+ info->idle_stats.recv_bytes++;
+ info->icount.rx++;
+ }
#endif
#ifdef CONFIG_CYZ_INTR
- /* Recalculate the number of chars in the RX buffer and issue
- a cmd in case it's higher than the RX high water mark */
- rx_put = cy_readl(&buf_ctrl->rx_put);
- if (rx_put >= rx_get)
- char_count = rx_put - rx_get;
- else
- char_count = rx_put - rx_get + rx_bufsize;
- if(char_count >= cy_readl(&buf_ctrl->rx_threshold)) {
- cy_sched_event(info, Cy_EVENT_Z_RX_FULL);
- }
+ /* Recalculate the number of chars in the RX buffer and issue
+ a cmd in case it's higher than the RX high water mark */
+ rx_put = cy_readl(&buf_ctrl->rx_put);
+ if (rx_put >= rx_get)
+ char_count = rx_put - rx_get;
+ else
+ char_count = rx_put - rx_get + rx_bufsize;
+ if (char_count >= (int)cy_readl(&buf_ctrl->
+ rx_threshold)) {
+ cy_sched_event(info, Cy_EVENT_Z_RX_FULL);
+ }
#endif
- info->idle_stats.recv_idle = jiffies;
- tty_schedule_flip(tty);
+ info->idle_stats.recv_idle = jiffies;
+ tty_schedule_flip(tty);
+ }
+ /* Update rx_get */
+ cy_writel(&buf_ctrl->rx_get, new_rx_get);
}
- /* Update rx_get */
- cy_writel(&buf_ctrl->rx_get, new_rx_get);
- }
}
static void
cyz_handle_tx(struct cyclades_port *info,
- volatile struct CH_CTRL __iomem *ch_ctrl,
- volatile struct BUF_CTRL __iomem *buf_ctrl)
+ volatile struct CH_CTRL __iomem * ch_ctrl,
+ volatile struct BUF_CTRL __iomem * buf_ctrl)
{
- struct cyclades_card *cinfo = &cy_card[info->card];
- struct tty_struct *tty = info->tty;
- char data;
- volatile int char_count;
+ struct cyclades_card *cinfo = &cy_card[info->card];
+ struct tty_struct *tty = info->tty;
+ char data;
+ volatile int char_count;
#ifdef BLOCKMOVE
- int small_count;
+ int small_count;
#endif
- volatile uclong tx_put, tx_get, tx_bufsize, tx_bufaddr;
+ volatile uclong tx_put, tx_get, tx_bufsize, tx_bufaddr;
- if (info->xmit_cnt <= 0) /* Nothing to transmit */
- return;
+ if (info->xmit_cnt <= 0) /* Nothing to transmit */
+ return;
- tx_get = cy_readl(&buf_ctrl->tx_get);
- tx_put = cy_readl(&buf_ctrl->tx_put);
- tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize);
- tx_bufaddr = cy_readl(&buf_ctrl->tx_bufaddr);
- if (tx_put >= tx_get)
- char_count = tx_get - tx_put - 1 + tx_bufsize;
- else
- char_count = tx_get - tx_put - 1;
+ tx_get = cy_readl(&buf_ctrl->tx_get);
+ tx_put = cy_readl(&buf_ctrl->tx_put);
+ tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize);
+ tx_bufaddr = cy_readl(&buf_ctrl->tx_bufaddr);
+ if (tx_put >= tx_get)
+ char_count = tx_get - tx_put - 1 + tx_bufsize;
+ else
+ char_count = tx_get - tx_put - 1;
- if ( char_count ) {
+ if (char_count) {
- if( tty == 0 ){
- goto ztxdone;
- }
+ if (tty == 0) {
+ goto ztxdone;
+ }
- if(info->x_char) { /* send special char */
- data = info->x_char;
+ if (info->x_char) { /* send special char */
+ data = info->x_char;
- cy_writeb((cinfo->base_addr + tx_bufaddr + tx_put), data);
- tx_put = (tx_put + 1) & (tx_bufsize - 1);
- info->x_char = 0;
- char_count--;
- info->icount.tx++;
- info->last_active = jiffies;
- info->jiffies[2] = jiffies;
- }
+ cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
+ tx_put = (tx_put + 1) & (tx_bufsize - 1);
+ info->x_char = 0;
+ char_count--;
+ info->icount.tx++;
+ info->last_active = jiffies;
+ info->jiffies[2] = jiffies;
+ }
#ifdef BLOCKMOVE
- while(0 < (small_count =
- min_t(unsigned int, (tx_bufsize - tx_put),
- min_t(unsigned int, (SERIAL_XMIT_SIZE - info->xmit_tail),
- min_t(unsigned int, info->xmit_cnt, char_count))))) {
-
- memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr + tx_put),
- &info->xmit_buf[info->xmit_tail],
- small_count);
-
- tx_put = (tx_put + small_count) & (tx_bufsize - 1);
- char_count -= small_count;
- info->icount.tx += small_count;
- info->xmit_cnt -= small_count;
- info->xmit_tail =
- (info->xmit_tail + small_count) & (SERIAL_XMIT_SIZE - 1);
- info->last_active = jiffies;
- info->jiffies[2] = jiffies;
- }
+ while (0 < (small_count = min_t(unsigned int,
+ tx_bufsize - tx_put, min_t(unsigned int,
+ (SERIAL_XMIT_SIZE - info->xmit_tail),
+ min_t(unsigned int, info->xmit_cnt,
+ char_count))))) {
+
+ memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr +
+ tx_put),
+ &info->xmit_buf[info->xmit_tail],
+ small_count);
+
+ tx_put = (tx_put + small_count) & (tx_bufsize - 1);
+ char_count -= small_count;
+ info->icount.tx += small_count;
+ info->xmit_cnt -= small_count;
+ info->xmit_tail = (info->xmit_tail + small_count) &
+ (SERIAL_XMIT_SIZE - 1);
+ info->last_active = jiffies;
+ info->jiffies[2] = jiffies;
+ }
#else
- while (info->xmit_cnt && char_count){
- data = info->xmit_buf[info->xmit_tail];
- info->xmit_cnt--;
- info->xmit_tail = (info->xmit_tail + 1) & (SERIAL_XMIT_SIZE - 1);
-
- cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
- tx_put = (tx_put + 1) & (tx_bufsize - 1);
- char_count--;
- info->icount.tx++;
- info->last_active = jiffies;
- info->jiffies[2] = jiffies;
- }
+ while (info->xmit_cnt && char_count) {
+ data = info->xmit_buf[info->xmit_tail];
+ info->xmit_cnt--;
+ info->xmit_tail = (info->xmit_tail + 1) &
+ (SERIAL_XMIT_SIZE - 1);
+
+ cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
+ tx_put = (tx_put + 1) & (tx_bufsize - 1);
+ char_count--;
+ info->icount.tx++;
+ info->last_active = jiffies;
+ info->jiffies[2] = jiffies;
+ }
#endif
- ztxdone:
- if (info->xmit_cnt < WAKEUP_CHARS) {
- cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
+ztxdone:
+ if (info->xmit_cnt < WAKEUP_CHARS) {
+ cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
+ }
+ /* Update tx_put */
+ cy_writel(&buf_ctrl->tx_put, tx_put);
}
- /* Update tx_put */
- cy_writel(&buf_ctrl->tx_put, tx_put);
- }
}
-static void
-cyz_handle_cmd(struct cyclades_card *cinfo)
+static void cyz_handle_cmd(struct cyclades_card *cinfo)
{
- struct tty_struct *tty;
- struct cyclades_port *info;
- static volatile struct FIRM_ID __iomem *firm_id;
- static volatile struct ZFW_CTRL __iomem *zfw_ctrl;
- static volatile struct BOARD_CTRL __iomem *board_ctrl;
- static volatile struct CH_CTRL __iomem *ch_ctrl;
- static volatile struct BUF_CTRL __iomem *buf_ctrl;
- uclong channel;
- ucchar cmd;
- uclong param;
- uclong hw_ver, fw_ver;
- int special_count;
- int delta_count;
-
- firm_id = cinfo->base_addr + ID_ADDRESS;
- zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- fw_ver = cy_readl(&board_ctrl->fw_version);
- hw_ver = cy_readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->mail_box_0);
-
-
- while(cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) {
- special_count = 0;
- delta_count = 0;
- info = &cy_port[channel + cinfo->first_line];
- if((tty = info->tty) == 0) {
- continue;
- }
- ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
- buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
- switch(cmd) {
- case C_CM_PR_ERROR:
- tty_insert_flip_char(tty, 0, TTY_PARITY);
- info->icount.rx++;
- special_count++;
- break;
- case C_CM_FR_ERROR:
- tty_insert_flip_char(tty, 0, TTY_FRAME);
- info->icount.rx++;
- special_count++;
- break;
- case C_CM_RXBRK:
- tty_insert_flip_char(tty, 0, TTY_BREAK);
- info->icount.rx++;
- special_count++;
- break;
- case C_CM_MDCD:
- info->icount.dcd++;
- delta_count++;
- if (info->flags & ASYNC_CHECK_CD){
- if ((fw_ver > 241 ?
- ((u_long)param) :
- cy_readl(&ch_ctrl->rs_status)) & C_RS_DCD) {
- cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP);
- }else{
- cy_sched_event(info, Cy_EVENT_HANGUP);
- }
+ struct tty_struct *tty;
+ struct cyclades_port *info;
+ static volatile struct FIRM_ID __iomem *firm_id;
+ static volatile struct ZFW_CTRL __iomem *zfw_ctrl;
+ static volatile struct BOARD_CTRL __iomem *board_ctrl;
+ static volatile struct CH_CTRL __iomem *ch_ctrl;
+ static volatile struct BUF_CTRL __iomem *buf_ctrl;
+ uclong channel;
+ ucchar cmd;
+ uclong param;
+ uclong hw_ver, fw_ver;
+ int special_count;
+ int delta_count;
+
+ firm_id = cinfo->base_addr + ID_ADDRESS;
+ zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) &
+ 0xfffff);
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ fw_ver = cy_readl(&board_ctrl->fw_version);
+ hw_ver = cy_readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
+ mail_box_0);
+
+ while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) {
+ special_count = 0;
+ delta_count = 0;
+ info = &cy_port[channel + cinfo->first_line];
+ if ((tty = info->tty) == 0) {
+ continue;
}
- break;
- case C_CM_MCTS:
- info->icount.cts++;
- delta_count++;
- break;
- case C_CM_MRI:
- info->icount.rng++;
- delta_count++;
- break;
- case C_CM_MDSR:
- info->icount.dsr++;
- delta_count++;
- break;
+ ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
+ buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
+
+ switch (cmd) {
+ case C_CM_PR_ERROR:
+ tty_insert_flip_char(tty, 0, TTY_PARITY);
+ info->icount.rx++;
+ special_count++;
+ break;
+ case C_CM_FR_ERROR:
+ tty_insert_flip_char(tty, 0, TTY_FRAME);
+ info->icount.rx++;
+ special_count++;
+ break;
+ case C_CM_RXBRK:
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
+ info->icount.rx++;
+ special_count++;
+ break;
+ case C_CM_MDCD:
+ info->icount.dcd++;
+ delta_count++;
+ if (info->flags & ASYNC_CHECK_CD) {
+ if ((fw_ver > 241 ? ((u_long) param) :
+ cy_readl(&ch_ctrl->rs_status)) &
+ C_RS_DCD) {
+ cy_sched_event(info,
+ Cy_EVENT_OPEN_WAKEUP);
+ } else {
+ cy_sched_event(info, Cy_EVENT_HANGUP);
+ }
+ }
+ break;
+ case C_CM_MCTS:
+ info->icount.cts++;
+ delta_count++;
+ break;
+ case C_CM_MRI:
+ info->icount.rng++;
+ delta_count++;
+ break;
+ case C_CM_MDSR:
+ info->icount.dsr++;
+ delta_count++;
+ break;
#ifdef Z_WAKE
- case C_CM_IOCTLW:
- cy_sched_event(info, Cy_EVENT_SHUTDOWN_WAKEUP);
- break;
+ case C_CM_IOCTLW:
+ cy_sched_event(info, Cy_EVENT_SHUTDOWN_WAKEUP);
+ break;
#endif
#ifdef CONFIG_CYZ_INTR
- case C_CM_RXHIWM:
- case C_CM_RXNNDT:
- case C_CM_INTBACK2:
- /* Reception Interrupt */
+ case C_CM_RXHIWM:
+ case C_CM_RXNNDT:
+ case C_CM_INTBACK2:
+ /* Reception Interrupt */
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyz_interrupt: rcvd intr, card %d, port %ld\n\r",
- info->card, channel);
+ printk("cyz_interrupt: rcvd intr, card %d, "
+ "port %ld\n\r", info->card, channel);
#endif
- cyz_handle_rx(info, ch_ctrl, buf_ctrl);
- break;
- case C_CM_TXBEMPTY:
- case C_CM_TXLOWWM:
- case C_CM_INTBACK:
- /* Transmission Interrupt */
+ cyz_handle_rx(info, ch_ctrl, buf_ctrl);
+ break;
+ case C_CM_TXBEMPTY:
+ case C_CM_TXLOWWM:
+ case C_CM_INTBACK:
+ /* Transmission Interrupt */
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyz_interrupt: xmit intr, card %d, port %ld\n\r",
- info->card, channel);
+ printk("cyz_interrupt: xmit intr, card %d, "
+ "port %ld\n\r", info->card, channel);
#endif
- cyz_handle_tx(info, ch_ctrl, buf_ctrl);
- break;
-#endif /* CONFIG_CYZ_INTR */
- case C_CM_FATAL:
- /* should do something with this !!! */
- break;
- default:
- break;
+ cyz_handle_tx(info, ch_ctrl, buf_ctrl);
+ break;
+#endif /* CONFIG_CYZ_INTR */
+ case C_CM_FATAL:
+ /* should do something with this !!! */
+ break;
+ default:
+ break;
+ }
+ if (delta_count)
+ cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP);
+ if (special_count)
+ tty_schedule_flip(tty);
}
- if(delta_count)
- cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP);
- if(special_count)
- tty_schedule_flip(tty);
- }
}
#ifdef CONFIG_CYZ_INTR
-static irqreturn_t
-cyz_interrupt(int irq, void *dev_id)
+static irqreturn_t cyz_interrupt(int irq, void *dev_id)
{
- struct cyclades_card *cinfo;
+ struct cyclades_card *cinfo;
- if((cinfo = (struct cyclades_card *)dev_id) == 0){
+ if ((cinfo = (struct cyclades_card *)dev_id) == 0) {
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyz_interrupt: spurious interrupt %d\n\r", irq);
+ printk("cyz_interrupt: spurious interrupt %d\n\r", irq);
#endif
- return IRQ_NONE; /* spurious interrupt */
- }
+ return IRQ_NONE; /* spurious interrupt */
+ }
- if (!ISZLOADED(*cinfo)) {
+ if (!ISZLOADED(*cinfo)) {
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyz_interrupt: board not yet loaded (IRQ%d).\n\r", irq);
+ printk("cyz_interrupt: board not yet loaded (IRQ%d).\n\r", irq);
#endif
- return IRQ_NONE;
- }
+ return IRQ_NONE;
+ }
- /* Handle the interrupts */
- cyz_handle_cmd(cinfo);
+ /* Handle the interrupts */
+ cyz_handle_cmd(cinfo);
- return IRQ_HANDLED;
-} /* cyz_interrupt */
+ return IRQ_HANDLED;
+} /* cyz_interrupt */
-static void
-cyz_rx_restart(unsigned long arg)
+static void cyz_rx_restart(unsigned long arg)
{
- struct cyclades_port *info = (struct cyclades_port *)arg;
- int retval;
- int card = info->card;
- uclong channel = (info->line) - (cy_card[card].first_line);
- unsigned long flags;
-
- CY_LOCK(info, flags);
- retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK2, 0L);
- if (retval != 0){
- printk("cyc:cyz_rx_restart retval on ttyC%d was %x\n",
- info->line, retval);
- }
- cyz_rx_full_timer[info->line].function = NULL;
- CY_UNLOCK(info, flags);
+ struct cyclades_port *info = (struct cyclades_port *)arg;
+ int retval;
+ int card = info->card;
+ uclong channel = (info->line) - (cy_card[card].first_line);
+ unsigned long flags;
+
+ CY_LOCK(info, flags);
+ retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK2, 0L);
+ if (retval != 0) {
+ printk("cyc:cyz_rx_restart retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
+ cyz_rx_full_timer[info->line].function = NULL;
+ CY_UNLOCK(info, flags);
}
-#else /* CONFIG_CYZ_INTR */
+#else /* CONFIG_CYZ_INTR */
-static void
-cyz_poll(unsigned long arg)
+static void cyz_poll(unsigned long arg)
{
- struct cyclades_card *cinfo;
- struct cyclades_port *info;
- struct tty_struct *tty;
- static volatile struct FIRM_ID *firm_id;
- static volatile struct ZFW_CTRL *zfw_ctrl;
- static volatile struct BOARD_CTRL *board_ctrl;
- static volatile struct CH_CTRL *ch_ctrl;
- static volatile struct BUF_CTRL *buf_ctrl;
- int card, port;
-
- cyz_timerlist.expires = jiffies + (HZ);
- for (card = 0 ; card < NR_CARDS ; card++){
- cinfo = &cy_card[card];
-
- if (!IS_CYC_Z(*cinfo)) continue;
- if (!ISZLOADED(*cinfo)) continue;
+ struct cyclades_card *cinfo;
+ struct cyclades_port *info;
+ struct tty_struct *tty;
+ static volatile struct FIRM_ID *firm_id;
+ static volatile struct ZFW_CTRL *zfw_ctrl;
+ static volatile struct BOARD_CTRL *board_ctrl;
+ static volatile struct CH_CTRL *ch_ctrl;
+ static volatile struct BUF_CTRL *buf_ctrl;
+ int card, port;
- firm_id = cinfo->base_addr + ID_ADDRESS;
- zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &(zfw_ctrl->board_ctrl);
+ cyz_timerlist.expires = jiffies + (HZ);
+ for (card = 0; card < NR_CARDS; card++) {
+ cinfo = &cy_card[card];
+
+ if (!IS_CYC_Z(*cinfo))
+ continue;
+ if (!ISZLOADED(*cinfo))
+ continue;
+
+ firm_id = cinfo->base_addr + ID_ADDRESS;
+ zfw_ctrl = cinfo->base_addr +
+ (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
+ board_ctrl = &(zfw_ctrl->board_ctrl);
/* Skip first polling cycle to avoid racing conditions with the FW */
- if (!cinfo->intr_enabled) {
- cinfo->nports = (int) cy_readl(&board_ctrl->n_channel);
- cinfo->intr_enabled = 1;
- continue;
- }
+ if (!cinfo->intr_enabled) {
+ cinfo->nports = (int)cy_readl(&board_ctrl->n_channel);
+ cinfo->intr_enabled = 1;
+ continue;
+ }
- cyz_handle_cmd(cinfo);
+ cyz_handle_cmd(cinfo);
- for (port = 0 ; port < cinfo->nports ; port++) {
- info = &cy_port[ port + cinfo->first_line ];
- tty = info->tty;
- ch_ctrl = &(zfw_ctrl->ch_ctrl[port]);
- buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
+ for (port = 0; port < cinfo->nports; port++) {
+ info = &cy_port[port + cinfo->first_line];
+ tty = info->tty;
+ ch_ctrl = &(zfw_ctrl->ch_ctrl[port]);
+ buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
- if (!info->throttle)
- cyz_handle_rx(info, ch_ctrl, buf_ctrl);
- cyz_handle_tx(info, ch_ctrl, buf_ctrl);
+ if (!info->throttle)
+ cyz_handle_rx(info, ch_ctrl, buf_ctrl);
+ cyz_handle_tx(info, ch_ctrl, buf_ctrl);
+ }
+ /* poll every 'cyz_polling_cycle' period */
+ cyz_timerlist.expires = jiffies + cyz_polling_cycle;
}
- /* poll every 'cyz_polling_cycle' period */
- cyz_timerlist.expires = jiffies + cyz_polling_cycle;
- }
- add_timer(&cyz_timerlist);
-
- return;
-} /* cyz_poll */
+ add_timer(&cyz_timerlist);
+} /* cyz_poll */
-#endif /* CONFIG_CYZ_INTR */
+#endif /* CONFIG_CYZ_INTR */
/********** End of block of Cyclades-Z specific code *********/
/***********************************************************/
-
/* This is called whenever a port becomes active;
interrupts are enabled and DTR & RTS are turned on.
*/
-static int
-startup(struct cyclades_port * info)
+static int startup(struct cyclades_port *info)
{
- unsigned long flags;
- int retval = 0;
- void __iomem *base_addr;
- int card,chip,channel,index;
- unsigned long page;
+ unsigned long flags;
+ int retval = 0;
+ void __iomem *base_addr;
+ int card, chip, channel, index;
+ unsigned long page;
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
- page = get_zeroed_page(GFP_KERNEL);
- if (!page)
- return -ENOMEM;
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
- CY_LOCK(info, flags);
+ CY_LOCK(info, flags);
- if (info->flags & ASYNC_INITIALIZED){
- free_page(page);
- goto errout;
- }
+ if (info->flags & ASYNC_INITIALIZED) {
+ free_page(page);
+ goto errout;
+ }
- if (!info->type){
- if (info->tty){
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- free_page(page);
- goto errout;
- }
+ if (!info->type) {
+ if (info->tty) {
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ free_page(page);
+ goto errout;
+ }
- if (info->xmit_buf)
- free_page(page);
- else
- info->xmit_buf = (unsigned char *) page;
+ if (info->xmit_buf)
+ free_page(page);
+ else
+ info->xmit_buf = (unsigned char *)page;
- CY_UNLOCK(info, flags);
+ CY_UNLOCK(info, flags);
- set_line_char(info);
+ set_line_char(info);
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = cy_card[card].base_addr +
+ (cy_chip_offset[chip] << index);
#ifdef CY_DEBUG_OPEN
- printk("cyc startup card %d, chip %d, channel %d, base_addr %lx\n",
- card, chip, channel, (long)base_addr);/**/
+ printk("cyc startup card %d, chip %d, channel %d, "
+ "base_addr %lx\n",
+ card, chip, channel, (long)base_addr);
+ /**/
#endif
+ CY_LOCK(info, flags);
- CY_LOCK(info, flags);
-
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
- cy_writeb(base_addr+(CyRTPR<<index), (info->default_timeout
- ? info->default_timeout : 0x02)); /* 10ms rx timeout */
+ cy_writeb(base_addr + (CyRTPR << index),
+ (info->default_timeout ? info->default_timeout : 0x02));
+ /* 10ms rx timeout */
- cyy_issue_cmd(base_addr,CyCHAN_CTL|CyENB_RCVR|CyENB_XMTR,index);
+ cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR,
+ index);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- cy_writeb(base_addr+(CyMSVR1<<index), CyRTS);
- cy_writeb(base_addr+(CyMSVR2<<index), CyDTR);
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
+ cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:startup raising DTR\n");
- printk(" status: 0x%x, 0x%x\n",
- cy_readb(base_addr+(CyMSVR1<<index)),
- cy_readb(base_addr+(CyMSVR2<<index)));
+ printk("cyc:startup raising DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr + (CyMSVR1 << index)),
+ cy_readb(base_addr + (CyMSVR2 << index)));
#endif
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) | CyRxData);
- info->flags |= ASYNC_INITIALIZED;
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr + (CySRER << index)) | CyRxData);
+ info->flags |= ASYNC_INITIALIZED;
- if (info->tty){
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- info->breakon = info->breakoff = 0;
- memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
- info->idle_stats.in_use =
- info->idle_stats.recv_idle =
- info->idle_stats.xmit_idle = jiffies;
+ if (info->tty) {
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ info->breakon = info->breakoff = 0;
+ memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
+ info->idle_stats.in_use =
+ info->idle_stats.recv_idle =
+ info->idle_stats.xmit_idle = jiffies;
- CY_UNLOCK(info, flags);
+ CY_UNLOCK(info, flags);
- } else {
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
- int retval;
+ } else {
+ struct FIRM_ID __iomem *firm_id;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+ struct CH_CTRL __iomem *ch_ctrl;
+ int retval;
- base_addr = cy_card[card].base_addr;
+ base_addr = cy_card[card].base_addr;
- firm_id = base_addr + ID_ADDRESS;
- if (!ISZLOADED(cy_card[card])){
- return -ENODEV;
- }
+ firm_id = base_addr + ID_ADDRESS;
+ if (!ISZLOADED(cy_card[card])) {
+ return -ENODEV;
+ }
- zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
+ zfw_ctrl = cy_card[card].base_addr +
+ (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = zfw_ctrl->ch_ctrl;
#ifdef CY_DEBUG_OPEN
- printk("cyc startup Z card %d, channel %d, base_addr %lx\n",
- card, channel, (long)base_addr);/**/
+ printk("cyc startup Z card %d, channel %d, base_addr %lx\n",
+ card, channel, (long)base_addr);
+ /**/
#endif
+ CY_LOCK(info, flags);
- CY_LOCK(info, flags);
-
- cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE);
+ cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE);
#ifdef Z_WAKE
#ifdef CONFIG_CYZ_INTR
- cy_writel(&ch_ctrl[channel].intr_enable,
- C_IN_TXBEMPTY|C_IN_TXLOWWM|C_IN_RXHIWM|C_IN_RXNNDT|
- C_IN_IOCTLW|
- C_IN_MDCD);
+ cy_writel(&ch_ctrl[channel].intr_enable,
+ C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
+ C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD);
#else
- cy_writel(&ch_ctrl[channel].intr_enable,
- C_IN_IOCTLW|
- C_IN_MDCD);
-#endif /* CONFIG_CYZ_INTR */
+ cy_writel(&ch_ctrl[channel].intr_enable,
+ C_IN_IOCTLW | C_IN_MDCD);
+#endif /* CONFIG_CYZ_INTR */
#else
#ifdef CONFIG_CYZ_INTR
- cy_writel(&ch_ctrl[channel].intr_enable,
- C_IN_TXBEMPTY|C_IN_TXLOWWM|C_IN_RXHIWM|C_IN_RXNNDT|
- C_IN_MDCD);
+ cy_writel(&ch_ctrl[channel].intr_enable,
+ C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
+ C_IN_RXNNDT | C_IN_MDCD);
#else
- cy_writel(&ch_ctrl[channel].intr_enable,
- C_IN_MDCD);
-#endif /* CONFIG_CYZ_INTR */
-#endif /* Z_WAKE */
-
- retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L);
- if (retval != 0){
- printk("cyc:startup(1) retval on ttyC%d was %x\n",
- info->line, retval);
- }
+ cy_writel(&ch_ctrl[channel].intr_enable, C_IN_MDCD);
+#endif /* CONFIG_CYZ_INTR */
+#endif /* Z_WAKE */
+
+ retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L);
+ if (retval != 0) {
+ printk("cyc:startup(1) retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
- /* Flush RX buffers before raising DTR and RTS */
- retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_RX, 0L);
- if (retval != 0){
- printk("cyc:startup(2) retval on ttyC%d was %x\n",
- info->line, retval);
- }
+ /* Flush RX buffers before raising DTR and RTS */
+ retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_RX,
+ 0L);
+ if (retval != 0) {
+ printk("cyc:startup(2) retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
- /* set timeout !!! */
- /* set RTS and DTR !!! */
- cy_writel(&ch_ctrl[channel].rs_control,
- cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS | C_RS_DTR) ;
- retval = cyz_issue_cmd(&cy_card[info->card],
- channel, C_CM_IOCTLM, 0L);
- if (retval != 0){
- printk("cyc:startup(3) retval on ttyC%d was %x\n",
- info->line, retval);
- }
+ /* set timeout !!! */
+ /* set RTS and DTR !!! */
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS |
+ C_RS_DTR);
+ retval = cyz_issue_cmd(&cy_card[info->card], channel,
+ C_CM_IOCTLM, 0L);
+ if (retval != 0) {
+ printk("cyc:startup(3) retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
#ifdef CY_DEBUG_DTR
- printk("cyc:startup raising Z DTR\n");
+ printk("cyc:startup raising Z DTR\n");
#endif
- /* enable send, recv, modem !!! */
+ /* enable send, recv, modem !!! */
- info->flags |= ASYNC_INITIALIZED;
- if (info->tty){
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- info->breakon = info->breakoff = 0;
- memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
- info->idle_stats.in_use =
- info->idle_stats.recv_idle =
- info->idle_stats.xmit_idle = jiffies;
+ info->flags |= ASYNC_INITIALIZED;
+ if (info->tty) {
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ info->breakon = info->breakoff = 0;
+ memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
+ info->idle_stats.in_use =
+ info->idle_stats.recv_idle =
+ info->idle_stats.xmit_idle = jiffies;
- CY_UNLOCK(info, flags);
- }
+ CY_UNLOCK(info, flags);
+ }
#ifdef CY_DEBUG_OPEN
printk(" cyc startup done\n");
errout:
CY_UNLOCK(info, flags);
return retval;
-} /* startup */
-
+} /* startup */
-static void
-start_xmit( struct cyclades_port *info )
+static void start_xmit(struct cyclades_port *info)
{
- unsigned long flags;
- void __iomem *base_addr;
- int card,chip,channel,index;
-
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
+ unsigned long flags;
+ void __iomem *base_addr;
+ int card, chip, channel, index;
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), channel);
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) | CyTxRdy);
- CY_UNLOCK(info, flags);
- } else {
-#ifdef CONFIG_CYZ_INTR
- int retval;
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = cy_card[card].base_addr +
+ (cy_chip_offset[chip] << index);
- CY_LOCK(info, flags);
- retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK, 0L);
- if (retval != 0){
- printk("cyc:start_xmit retval on ttyC%d was %x\n",
- info->line, retval);
- }
- CY_UNLOCK(info, flags);
-#else /* CONFIG_CYZ_INTR */
- /* Don't have to do anything at this time */
-#endif /* CONFIG_CYZ_INTR */
- }
-} /* start_xmit */
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index), channel);
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr + (CySRER << index)) | CyTxRdy);
+ CY_UNLOCK(info, flags);
+ } else {
+#ifdef CONFIG_CYZ_INTR
+ int retval;
+
+ CY_LOCK(info, flags);
+ retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK,
+ 0L);
+ if (retval != 0) {
+ printk("cyc:start_xmit retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
+ CY_UNLOCK(info, flags);
+#else /* CONFIG_CYZ_INTR */
+ /* Don't have to do anything at this time */
+#endif /* CONFIG_CYZ_INTR */
+ }
+} /* start_xmit */
/*
* This routine shuts down a serial port; interrupts are disabled,
* and DTR is dropped if the hangup on close termio flag is on.
*/
-static void
-shutdown(struct cyclades_port * info)
+static void shutdown(struct cyclades_port *info)
{
- unsigned long flags;
- void __iomem *base_addr;
- int card,chip,channel,index;
-
- if (!(info->flags & ASYNC_INITIALIZED)){
- return;
- }
-
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
+ unsigned long flags;
+ void __iomem *base_addr;
+ int card, chip, channel, index;
+
+ if (!(info->flags & ASYNC_INITIALIZED)) {
+ return;
+ }
+
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = cy_card[card].base_addr +
+ (cy_chip_offset[chip] << index);
#ifdef CY_DEBUG_OPEN
- printk("cyc shutdown Y card %d, chip %d, channel %d, base_addr %lx\n",
- card, chip, channel, (long)base_addr);
+ printk("cyc shutdown Y card %d, chip %d, channel %d, "
+ "base_addr %lx\n",
+ card, chip, channel, (long)base_addr);
#endif
- CY_LOCK(info, flags);
+ CY_LOCK(info, flags);
+
+ /* Clear delta_msr_wait queue to avoid mem leaks. */
+ wake_up_interruptible(&info->delta_msr_wait);
- /* Clear delta_msr_wait queue to avoid mem leaks. */
- wake_up_interruptible(&info->delta_msr_wait);
-
- if (info->xmit_buf){
- unsigned char * temp;
- temp = info->xmit_buf;
- info->xmit_buf = NULL;
- free_page((unsigned long) temp);
- }
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
- cy_writeb(base_addr+(CyMSVR1<<index), ~CyRTS);
- cy_writeb(base_addr+(CyMSVR2<<index), ~CyDTR);
+ if (info->xmit_buf) {
+ unsigned char *temp;
+ temp = info->xmit_buf;
+ info->xmit_buf = NULL;
+ free_page((unsigned long)temp);
+ }
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
+ cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
#ifdef CY_DEBUG_DTR
- printk("cyc shutdown dropping DTR\n");
- printk(" status: 0x%x, 0x%x\n",
- cy_readb(base_addr+(CyMSVR1<<index)),
- cy_readb(base_addr+(CyMSVR2<<index)));
+ printk("cyc shutdown dropping DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr + (CyMSVR1 << index)),
+ cy_readb(base_addr + (CyMSVR2 << index)));
#endif
- }
- cyy_issue_cmd(base_addr,CyCHAN_CTL|CyDIS_RCVR,index);
- /* it may be appropriate to clear _XMIT at
- some later date (after testing)!!! */
-
- if (info->tty){
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- info->flags &= ~ASYNC_INITIALIZED;
- CY_UNLOCK(info, flags);
- } else {
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
- int retval;
-
- base_addr = cy_card[card].base_addr;
+ }
+ cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index);
+ /* it may be appropriate to clear _XMIT at
+ some later date (after testing)!!! */
+
+ if (info->tty) {
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ info->flags &= ~ASYNC_INITIALIZED;
+ CY_UNLOCK(info, flags);
+ } else {
+ struct FIRM_ID __iomem *firm_id;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+ struct CH_CTRL __iomem *ch_ctrl;
+ int retval;
+
+ base_addr = cy_card[card].base_addr;
#ifdef CY_DEBUG_OPEN
- printk("cyc shutdown Z card %d, channel %d, base_addr %lx\n",
- card, channel, (long)base_addr);
+ printk("cyc shutdown Z card %d, channel %d, base_addr %lx\n",
+ card, channel, (long)base_addr);
#endif
- firm_id = base_addr + ID_ADDRESS;
- if (!ISZLOADED(cy_card[card])) {
- return;
- }
+ firm_id = base_addr + ID_ADDRESS;
+ if (!ISZLOADED(cy_card[card])) {
+ return;
+ }
- zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
+ zfw_ctrl = cy_card[card].base_addr +
+ (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = zfw_ctrl->ch_ctrl;
- CY_LOCK(info, flags);
+ CY_LOCK(info, flags);
- if (info->xmit_buf){
- unsigned char * temp;
- temp = info->xmit_buf;
- info->xmit_buf = NULL;
- free_page((unsigned long) temp);
- }
-
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
- cy_writel(&ch_ctrl[channel].rs_control,
- (uclong)(cy_readl(&ch_ctrl[channel].rs_control) &
- ~(C_RS_RTS | C_RS_DTR)));
- retval = cyz_issue_cmd(&cy_card[info->card],
- channel, C_CM_IOCTLM, 0L);
- if (retval != 0){
- printk("cyc:shutdown retval on ttyC%d was %x\n",
- info->line, retval);
+ if (info->xmit_buf) {
+ unsigned char *temp;
+ temp = info->xmit_buf;
+ info->xmit_buf = NULL;
+ free_page((unsigned long)temp);
}
+
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ cy_writel(&ch_ctrl[channel].rs_control,
+ (uclong)(cy_readl(&ch_ctrl[channel].rs_control)&
+ ~(C_RS_RTS | C_RS_DTR)));
+ retval = cyz_issue_cmd(&cy_card[info->card], channel,
+ C_CM_IOCTLM, 0L);
+ if (retval != 0) {
+ printk("cyc:shutdown retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
#ifdef CY_DEBUG_DTR
- printk("cyc:shutdown dropping Z DTR\n");
+ printk("cyc:shutdown dropping Z DTR\n");
#endif
- }
-
- if (info->tty){
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- info->flags &= ~ASYNC_INITIALIZED;
+ }
- CY_UNLOCK(info, flags);
- }
+ if (info->tty) {
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ info->flags &= ~ASYNC_INITIALIZED;
+
+ CY_UNLOCK(info, flags);
+ }
#ifdef CY_DEBUG_OPEN
- printk(" cyc shutdown done\n");
+ printk(" cyc shutdown done\n");
#endif
- return;
-} /* shutdown */
-
+} /* shutdown */
/*
* ------------------------------------------------------------
*/
static int
-block_til_ready(struct tty_struct *tty, struct file * filp,
- struct cyclades_port *info)
+block_til_ready(struct tty_struct *tty, struct file *filp,
+ struct cyclades_port *info)
{
- DECLARE_WAITQUEUE(wait, current);
- struct cyclades_card *cinfo;
- unsigned long flags;
- int chip, channel,index;
- int retval;
- void __iomem *base_addr;
-
- cinfo = &cy_card[info->card];
- channel = info->line - cinfo->first_line;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&info->close_wait);
+ DECLARE_WAITQUEUE(wait, current);
+ struct cyclades_card *cinfo;
+ unsigned long flags;
+ int chip, channel, index;
+ int retval;
+ void __iomem *base_addr;
+
+ cinfo = &cy_card[info->card];
+ channel = info->line - cinfo->first_line;
+
+ /*
+ * If the device is in the middle of being closed, then block
+ * until it's done, and then try again.
+ */
+ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&info->close_wait);
+ }
+ return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
- return ((info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
- }
-
- /*
- * If non-blocking mode is set, then make the check up front
- * and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * cy_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+
+ /*
+ * If non-blocking mode is set, then make the check up front
+ * and then exit.
+ */
+ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, info->count is dropped by one, so that
+ * cy_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+ add_wait_queue(&info->open_wait, &wait);
#ifdef CY_DEBUG_OPEN
- printk("cyc block_til_ready before block: ttyC%d, count = %d\n",
- info->line, info->count);/**/
+ printk("cyc block_til_ready before block: ttyC%d, count = %d\n",
+ info->line, info->count);
+ /**/
#endif
- CY_LOCK(info, flags);
- if (!tty_hung_up_p(filp))
- info->count--;
- CY_UNLOCK(info, flags);
+ CY_LOCK(info, flags);
+ if (!tty_hung_up_p(filp))
+ info->count--;
+ CY_UNLOCK(info, flags);
#ifdef CY_DEBUG_COUNT
- printk("cyc block_til_ready: (%d): decrementing count to %d\n",
- current->pid, info->count);
+ printk("cyc block_til_ready: (%d): decrementing count to %d\n",
+ current->pid, info->count);
#endif
- info->blocked_open++;
-
- if (!IS_CYC_Z(*cinfo)) {
- chip = channel>>2;
- channel &= 0x03;
- index = cinfo->bus_index;
- base_addr = cinfo->base_addr + (cy_chip_offset[chip]<<index);
-
- while (1) {
- CY_LOCK(info, flags);
- if ((tty->termios->c_cflag & CBAUD)){
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- cy_writeb(base_addr+(CyMSVR1<<index), CyRTS);
- cy_writeb(base_addr+(CyMSVR2<<index), CyDTR);
+ info->blocked_open++;
+
+ if (!IS_CYC_Z(*cinfo)) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cinfo->bus_index;
+ base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
+
+ while (1) {
+ CY_LOCK(info, flags);
+ if ((tty->termios->c_cflag & CBAUD)) {
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char) channel);
+ cy_writeb(base_addr + (CyMSVR1 << index),
+ CyRTS);
+ cy_writeb(base_addr + (CyMSVR2 << index),
+ CyDTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:block_til_ready raising DTR\n");
- printk(" status: 0x%x, 0x%x\n",
- cy_readb(base_addr+(CyMSVR1<<index)),
- cy_readb(base_addr+(CyMSVR2<<index)));
+ printk("cyc:block_til_ready raising DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr +
+ (CyMSVR1 << index)),
+ cy_readb(base_addr +
+ (CyMSVR2 << index)));
#endif
- }
- CY_UNLOCK(info, flags);
+ }
+ CY_UNLOCK(info, flags);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp)
- || !(info->flags & ASYNC_INITIALIZED) ){
- retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- break;
- }
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (tty_hung_up_p(filp) ||
+ !(info->flags & ASYNC_INITIALIZED)) {
+ retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+ break;
+ }
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- if (!(info->flags & ASYNC_CLOSING)
- && (C_CLOCAL(tty)
- || (cy_readb(base_addr+(CyMSVR1<<index)) & CyDCD))) {
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char) channel);
+ if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
+ (cy_readb(base_addr +
+ (CyMSVR1 << index)) & CyDCD))) {
+ CY_UNLOCK(info, flags);
+ break;
+ }
CY_UNLOCK(info, flags);
- break;
- }
- CY_UNLOCK(info, flags);
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
#ifdef CY_DEBUG_OPEN
- printk("cyc block_til_ready blocking: ttyC%d, count = %d\n",
- info->line, info->count);/**/
+ printk("cyc block_til_ready blocking: ttyC%d, "
+ "count = %d\n",
+ info->line, info->count);
+ /**/
#endif
- schedule();
- }
- } else {
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
- int retval;
-
- base_addr = cinfo->base_addr;
- firm_id = base_addr + ID_ADDRESS;
- if (!ISZLOADED(*cinfo)){
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- return -EINVAL;
- }
-
- zfw_ctrl = base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
-
- while (1) {
- if ((tty->termios->c_cflag & CBAUD)){
- cy_writel(&ch_ctrl[channel].rs_control,
- cy_readl(&ch_ctrl[channel].rs_control) |
- (C_RS_RTS | C_RS_DTR));
- retval = cyz_issue_cmd(&cy_card[info->card],
- channel, C_CM_IOCTLM, 0L);
- if (retval != 0){
- printk("cyc:block_til_ready retval on ttyC%d was %x\n",
- info->line, retval);
+ schedule();
+ }
+ } else {
+ struct FIRM_ID __iomem *firm_id;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+ struct CH_CTRL __iomem *ch_ctrl;
+ int retval;
+
+ base_addr = cinfo->base_addr;
+ firm_id = base_addr + ID_ADDRESS;
+ if (!ISZLOADED(*cinfo)) {
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&info->open_wait, &wait);
+ return -EINVAL;
}
+
+ zfw_ctrl = base_addr + (cy_readl(&firm_id->zfwctrl_addr) &
+ 0xfffff);
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = zfw_ctrl->ch_ctrl;
+
+ while (1) {
+ if ((tty->termios->c_cflag & CBAUD)) {
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].
+ rs_control) | (C_RS_RTS |
+ C_RS_DTR));
+ retval = cyz_issue_cmd(&cy_card[info->card],
+ channel, C_CM_IOCTLM, 0L);
+ if (retval != 0) {
+ printk("cyc:block_til_ready retval on "
+ "ttyC%d was %x\n",
+ info->line, retval);
+ }
#ifdef CY_DEBUG_DTR
- printk("cyc:block_til_ready raising Z DTR\n");
+ printk("cyc:block_til_ready raising Z DTR\n");
#endif
- }
+ }
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp)
- || !(info->flags & ASYNC_INITIALIZED) ){
- retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- break;
- }
- if (!(info->flags & ASYNC_CLOSING)
- && (C_CLOCAL(tty)
- || (cy_readl(&ch_ctrl[channel].rs_status) & C_RS_DCD))) {
- break;
- }
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (tty_hung_up_p(filp) ||
+ !(info->flags & ASYNC_INITIALIZED)) {
+ retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+ break;
+ }
+ if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
+ (cy_readl(&ch_ctrl[channel].rs_status) &
+ C_RS_DCD))) {
+ break;
+ }
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
#ifdef CY_DEBUG_OPEN
- printk("cyc block_til_ready blocking: ttyC%d, count = %d\n",
- info->line, info->count);/**/
+ printk("cyc block_til_ready blocking: ttyC%d, "
+ "count = %d\n",
+ info->line, info->count);
+ /**/
#endif
- schedule();
+ schedule();
+ }
}
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp)){
- info->count++;
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&info->open_wait, &wait);
+ if (!tty_hung_up_p(filp)) {
+ info->count++;
#ifdef CY_DEBUG_COUNT
- printk("cyc:block_til_ready (%d): incrementing count to %d\n",
- current->pid, info->count);
+ printk("cyc:block_til_ready (%d): incrementing count to %d\n",
+ current->pid, info->count);
#endif
- }
- info->blocked_open--;
+ }
+ info->blocked_open--;
#ifdef CY_DEBUG_OPEN
- printk("cyc:block_til_ready after blocking: ttyC%d, count = %d\n",
- info->line, info->count);/**/
+ printk("cyc:block_til_ready after blocking: ttyC%d, count = %d\n",
+ info->line, info->count);
+ /**/
#endif
- if (retval)
- return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-} /* block_til_ready */
-
+ if (retval)
+ return retval;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+} /* block_til_ready */
/*
* This routine is called whenever a serial port is opened. It
* performs the serial-specific initialization for the tty structure.
*/
-static int
-cy_open(struct tty_struct *tty, struct file * filp)
+static int cy_open(struct tty_struct *tty, struct file *filp)
{
- struct cyclades_port *info;
- int retval, line;
-
- line = tty->index;
- if ((line < 0) || (NR_PORTS <= line)){
- return -ENODEV;
- }
- info = &cy_port[line];
- if (info->line < 0){
- return -ENODEV;
- }
-
- /* If the card's firmware hasn't been loaded,
- treat it as absent from the system. This
- will make the user pay attention.
- */
- if (IS_CYC_Z(cy_card[info->card])) {
- struct cyclades_card *cinfo = &cy_card[info->card];
- struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
-
- if (!ISZLOADED(*cinfo)) {
- if (((ZE_V1 ==cy_readl(&((struct RUNTIME_9060 __iomem *)
- (cinfo->ctl_addr))->mail_box_0)) &&
- Z_FPGA_CHECK (*cinfo)) &&
- (ZFIRM_HLT == cy_readl (&firm_id->signature)))
- {
- printk ("cyc:Cyclades-Z Error: you need an external power supply for this number of ports.\n\rFirmware halted.\r\n");
- } else {
- printk("cyc:Cyclades-Z firmware not yet loaded\n");
- }
- return -ENODEV;
- }
-#ifdef CONFIG_CYZ_INTR
- else {
- /* In case this Z board is operating in interrupt mode, its
- interrupts should be enabled as soon as the first open happens
- to one of its ports. */
- if (!cinfo->intr_enabled) {
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
-
- zfw_ctrl = cinfo->base_addr + (cy_readl (&firm_id->zfwctrl_addr) & 0xfffff);
+ struct cyclades_port *info;
+ int retval, line;
- board_ctrl = &zfw_ctrl->board_ctrl;
+ line = tty->index;
+ if ((line < 0) || (NR_PORTS <= line)) {
+ return -ENODEV;
+ }
+ info = &cy_port[line];
+ if (info->line < 0) {
+ return -ENODEV;
+ }
- /* Enable interrupts on the PLX chip */
- cy_writew(cinfo->ctl_addr+0x68,
- cy_readw(cinfo->ctl_addr+0x68)|0x0900);
- /* Enable interrupts on the FW */
- retval = cyz_issue_cmd(cinfo,
- 0, C_CM_IRQ_ENBL, 0L);
- if (retval != 0){
- printk("cyc:IRQ enable retval was %x\n", retval);
+ /* If the card's firmware hasn't been loaded,
+ treat it as absent from the system. This
+ will make the user pay attention.
+ */
+ if (IS_CYC_Z(cy_card[info->card])) {
+ struct cyclades_card *cinfo = &cy_card[info->card];
+ struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
+
+ if (!ISZLOADED(*cinfo)) {
+ if (((ZE_V1 == cy_readl(
+ &((struct RUNTIME_9060 __iomem *)
+ (cinfo->ctl_addr))->mail_box_0)) &&
+ Z_FPGA_CHECK(*cinfo)) &&
+ (ZFIRM_HLT == cy_readl(
+ &firm_id->signature))) {
+ printk("cyc:Cyclades-Z Error: you need an "
+ "external power supply for this number "
+ "of ports.\n\rFirmware halted.\r\n");
+ } else {
+ printk("cyc:Cyclades-Z firmware not yet "
+ "loaded\n");
+ }
+ return -ENODEV;
}
- cinfo->nports = (int) cy_readl (&board_ctrl->n_channel);
- cinfo->intr_enabled = 1;
- }
+#ifdef CONFIG_CYZ_INTR
+ else {
+ /* In case this Z board is operating in interrupt mode, its
+ interrupts should be enabled as soon as the first open
+ happens to one of its ports. */
+ if (!cinfo->intr_enabled) {
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+
+ zfw_ctrl = cinfo->base_addr +
+ (cy_readl(&firm_id->zfwctrl_addr) &
+ 0xfffff);
+
+ board_ctrl = &zfw_ctrl->board_ctrl;
+
+ /* Enable interrupts on the PLX chip */
+ cy_writew(cinfo->ctl_addr + 0x68,
+ cy_readw(cinfo->ctl_addr +
+ 0x68) | 0x0900);
+ /* Enable interrupts on the FW */
+ retval = cyz_issue_cmd(cinfo, 0,
+ C_CM_IRQ_ENBL, 0L);
+ if (retval != 0) {
+ printk("cyc:IRQ enable retval was %x\n",
+ retval);
+ }
+ cinfo->nports =
+ (int)cy_readl(&board_ctrl->n_channel);
+ cinfo->intr_enabled = 1;
+ }
+ }
+#endif /* CONFIG_CYZ_INTR */
+ /* Make sure this Z port really exists in hardware */
+ if (info->line > (cinfo->first_line + cinfo->nports - 1))
+ return -ENODEV;
}
-#endif /* CONFIG_CYZ_INTR */
- /* Make sure this Z port really exists in hardware */
- if (info->line > (cinfo->first_line + cinfo->nports - 1))
- return -ENODEV;
- }
#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_open ttyC%d\n", info->line); /* */
+ printk("cyc:cy_open ttyC%d\n", info->line); /* */
#endif
- tty->driver_data = info;
- info->tty = tty;
- if (serial_paranoia_check(info, tty->name, "cy_open")){
- return -ENODEV;
- }
+ tty->driver_data = info;
+ info->tty = tty;
+ if (serial_paranoia_check(info, tty->name, "cy_open")) {
+ return -ENODEV;
+ }
#ifdef CY_DEBUG_OPEN
- printk("cyc:cy_open ttyC%d, count = %d\n",
- info->line, info->count);/**/
+ printk("cyc:cy_open ttyC%d, count = %d\n", info->line, info->count);
+ /**/
#endif
- info->count++;
+ info->count++;
#ifdef CY_DEBUG_COUNT
- printk("cyc:cy_open (%d): incrementing count to %d\n",
- current->pid, info->count);
+ printk("cyc:cy_open (%d): incrementing count to %d\n",
+ current->pid, info->count);
#endif
- /*
- * If the port is the middle of closing, bail out now
- */
- if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
- return ((info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
- }
-
- /*
- * Start up serial port
- */
- retval = startup(info);
- if (retval){
- return retval;
- }
-
- retval = block_til_ready(tty, filp, info);
- if (retval) {
-#ifdef CY_DEBUG_OPEN
- printk("cyc:cy_open returning after block_til_ready with %d\n",
- retval);
-#endif
- return retval;
- }
+ /*
+ * If the port is the middle of closing, bail out now
+ */
+ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+ return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
+ }
- info->throttle = 0;
+ /*
+ * Start up serial port
+ */
+ retval = startup(info);
+ if (retval) {
+ return retval;
+ }
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
#ifdef CY_DEBUG_OPEN
- printk(" cyc:cy_open done\n");/**/
+ printk("cyc:cy_open returning after block_til_ready with %d\n",
+ retval);
#endif
+ return retval;
+ }
- return 0;
-} /* cy_open */
+ info->throttle = 0;
+#ifdef CY_DEBUG_OPEN
+ printk(" cyc:cy_open done\n");
+ /**/
+#endif
+ return 0;
+} /* cy_open */
/*
* cy_wait_until_sent() --- wait until the transmitter is empty
*/
-static void
-cy_wait_until_sent(struct tty_struct *tty, int timeout)
+static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
{
- struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
- void __iomem *base_addr;
- int card,chip,channel,index;
- unsigned long orig_jiffies;
- int char_time;
-
- if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent"))
- return;
-
- if (info->xmit_fifo_size == 0)
- return; /* Just in case.... */
-
-
- orig_jiffies = jiffies;
- /*
- * Set the check interval to be 1/5 of the estimated time to
- * send a single character, and make it at least 1. The check
- * interval should also be less than the timeout.
- *
- * Note: we have to use pretty tight timings here to satisfy
- * the NIST-PCTS.
- */
- char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
- char_time = char_time / 5;
- if (char_time <= 0)
- char_time = 1;
- if (timeout < 0)
- timeout = 0;
- if (timeout)
- char_time = min(char_time, timeout);
- /*
- * If the transmitter hasn't cleared in twice the approximate
- * amount of time to send the entire FIFO, it probably won't
- * ever clear. This assumes the UART isn't doing flow
- * control, which is currently the case. Hence, if it ever
- * takes longer than info->timeout, this is probably due to a
- * UART bug of some kind. So, we clamp the timeout parameter at
- * 2*info->timeout.
- */
- if (!timeout || timeout > 2*info->timeout)
- timeout = 2*info->timeout;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ void __iomem *base_addr;
+ int card, chip, channel, index;
+ unsigned long orig_jiffies;
+ int char_time;
+
+ if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent"))
+ return;
+
+ if (info->xmit_fifo_size == 0)
+ return; /* Just in case.... */
+
+ orig_jiffies = jiffies;
+ /*
+ * Set the check interval to be 1/5 of the estimated time to
+ * send a single character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
+ char_time = char_time / 5;
+ if (char_time <= 0)
+ char_time = 1;
+ if (timeout < 0)
+ timeout = 0;
+ if (timeout)
+ char_time = min(char_time, timeout);
+ /*
+ * If the transmitter hasn't cleared in twice the approximate
+ * amount of time to send the entire FIFO, it probably won't
+ * ever clear. This assumes the UART isn't doing flow
+ * control, which is currently the case. Hence, if it ever
+ * takes longer than info->timeout, this is probably due to a
+ * UART bug of some kind. So, we clamp the timeout parameter at
+ * 2*info->timeout.
+ */
+ if (!timeout || timeout > 2 * info->timeout)
+ timeout = 2 * info->timeout;
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
- printk("In cy_wait_until_sent(%d) check=%lu...", timeout, char_time);
- printk("jiff=%lu...", jiffies);
+ printk("In cy_wait_until_sent(%d) check=%lu...", timeout, char_time);
+ printk("jiff=%lu...", jiffies);
#endif
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
- while (cy_readb(base_addr+(CySRER<<index)) & CyTxRdy) {
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr =
+ cy_card[card].base_addr + (cy_chip_offset[chip] << index);
+ while (cy_readb(base_addr + (CySRER << index)) & CyTxRdy) {
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
- printk("Not clean (jiff=%lu)...", jiffies);
+ printk("Not clean (jiff=%lu)...", jiffies);
#endif
- if (msleep_interruptible(jiffies_to_msecs(char_time)))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
+ if (msleep_interruptible(jiffies_to_msecs(char_time)))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies +
+ timeout))
+ break;
+ }
+ } else {
+ /* Nothing to do! */
}
- } else {
- // Nothing to do!
- }
- /* Run one more char cycle */
- msleep_interruptible(jiffies_to_msecs(char_time * 5));
+ /* Run one more char cycle */
+ msleep_interruptible(jiffies_to_msecs(char_time * 5));
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
- printk("Clean (jiff=%lu)...done\n", jiffies);
+ printk("Clean (jiff=%lu)...done\n", jiffies);
#endif
}
/*
* This routine is called when a particular tty device is closed.
*/
-static void
-cy_close(struct tty_struct *tty, struct file *filp)
+static void cy_close(struct tty_struct *tty, struct file *filp)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- unsigned long flags;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ unsigned long flags;
#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_close ttyC%d\n", info->line);
+ printk("cyc:cy_close ttyC%d\n", info->line);
#endif
- if (!info || serial_paranoia_check(info, tty->name, "cy_close")){
- return;
- }
+ if (!info || serial_paranoia_check(info, tty->name, "cy_close")) {
+ return;
+ }
- CY_LOCK(info, flags);
- /* If the TTY is being hung up, nothing to do */
- if (tty_hung_up_p(filp)) {
- CY_UNLOCK(info, flags);
- return;
- }
-
+ CY_LOCK(info, flags);
+ /* If the TTY is being hung up, nothing to do */
+ if (tty_hung_up_p(filp)) {
+ CY_UNLOCK(info, flags);
+ return;
+ }
#ifdef CY_DEBUG_OPEN
- printk("cyc:cy_close ttyC%d, count = %d\n", info->line, info->count);
+ printk("cyc:cy_close ttyC%d, count = %d\n", info->line, info->count);
#endif
- if ((tty->count == 1) && (info->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("cyc:cy_close: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
- }
+ if ((tty->count == 1) && (info->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. Info->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk("cyc:cy_close: bad serial port count; tty->count is 1, "
+ "info->count is %d\n", info->count);
+ info->count = 1;
+ }
#ifdef CY_DEBUG_COUNT
- printk("cyc:cy_close at (%d): decrementing count to %d\n",
- current->pid, info->count - 1);
+ printk("cyc:cy_close at (%d): decrementing count to %d\n",
+ current->pid, info->count - 1);
#endif
- if (--info->count < 0) {
+ if (--info->count < 0) {
#ifdef CY_DEBUG_COUNT
- printk("cyc:cyc_close setting count to 0\n");
+ printk("cyc:cyc_close setting count to 0\n");
#endif
- info->count = 0;
- }
- if (info->count) {
- CY_UNLOCK(info, flags);
- return;
- }
- info->flags |= ASYNC_CLOSING;
-
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- CY_UNLOCK(info, flags);
- if (info->closing_wait != CY_CLOSING_WAIT_NONE) {
- tty_wait_until_sent(tty, info->closing_wait);
- }
- CY_LOCK(info, flags);
-
- if (!IS_CYC_Z(cy_card[info->card])) {
- int channel = info->line - cy_card[info->card].first_line;
- int index = cy_card[info->card].bus_index;
- void __iomem *base_addr = cy_card[info->card].base_addr + (cy_chip_offset[channel>>2] << index);
- /* Stop accepting input */
- channel &= 0x03;
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) & ~CyRxData);
- if (info->flags & ASYNC_INITIALIZED) {
- /* Waiting for on-board buffers to be empty before closing
- the port */
- CY_UNLOCK(info, flags);
- cy_wait_until_sent(tty, info->timeout);
- CY_LOCK(info, flags);
+ info->count = 0;
}
- } else {
-#ifdef Z_WAKE
- /* Waiting for on-board buffers to be empty before closing the port */
- void __iomem *base_addr = cy_card[info->card].base_addr;
- struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS;
- struct ZFW_CTRL __iomem *zfw_ctrl = base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl;
- int channel = info->line - cy_card[info->card].first_line;
- int retval;
+ if (info->count) {
+ CY_UNLOCK(info, flags);
+ return;
+ }
+ info->flags |= ASYNC_CLOSING;
- if (cy_readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) {
- retval = cyz_issue_cmd(&cy_card[info->card], channel,
- C_CM_IOCTLW, 0L);
- if (retval != 0){
- printk("cyc:cy_close retval on ttyC%d was %x\n",
- info->line, retval);
- }
- CY_UNLOCK(info, flags);
- interruptible_sleep_on(&info->shutdown_wait);
- CY_LOCK(info, flags);
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ CY_UNLOCK(info, flags);
+ if (info->closing_wait != CY_CLOSING_WAIT_NONE) {
+ tty_wait_until_sent(tty, info->closing_wait);
}
+ CY_LOCK(info, flags);
+
+ if (!IS_CYC_Z(cy_card[info->card])) {
+ int channel = info->line - cy_card[info->card].first_line;
+ int index = cy_card[info->card].bus_index;
+ void __iomem *base_addr = cy_card[info->card].base_addr +
+ (cy_chip_offset[channel >> 2] << index);
+ /* Stop accepting input */
+ channel &= 0x03;
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr + (CySRER << index)) & ~CyRxData);
+ if (info->flags & ASYNC_INITIALIZED) {
+ /* Waiting for on-board buffers to be empty before closing
+ the port */
+ CY_UNLOCK(info, flags);
+ cy_wait_until_sent(tty, info->timeout);
+ CY_LOCK(info, flags);
+ }
+ } else {
+#ifdef Z_WAKE
+ /* Waiting for on-board buffers to be empty before closing the port */
+ void __iomem *base_addr = cy_card[info->card].base_addr;
+ struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS;
+ struct ZFW_CTRL __iomem *zfw_ctrl =
+ base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
+ struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl;
+ int channel = info->line - cy_card[info->card].first_line;
+ int retval;
+
+ if (cy_readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) {
+ retval = cyz_issue_cmd(&cy_card[info->card], channel,
+ C_CM_IOCTLW, 0L);
+ if (retval != 0) {
+ printk("cyc:cy_close retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
+ CY_UNLOCK(info, flags);
+ interruptible_sleep_on(&info->shutdown_wait);
+ CY_LOCK(info, flags);
+ }
#endif
- }
-
- CY_UNLOCK(info, flags);
- shutdown(info);
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
- tty_ldisc_flush(tty);
- CY_LOCK(info, flags);
-
- tty->closing = 0;
- info->event = 0;
- info->tty = NULL;
- if (info->blocked_open) {
+ }
+
CY_UNLOCK(info, flags);
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
- }
- wake_up_interruptible(&info->open_wait);
+ shutdown(info);
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+ tty_ldisc_flush(tty);
CY_LOCK(info, flags);
- }
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = NULL;
+ if (info->blocked_open) {
+ CY_UNLOCK(info, flags);
+ if (info->close_delay) {
+ msleep_interruptible(jiffies_to_msecs
+ (info->close_delay));
+ }
+ wake_up_interruptible(&info->open_wait);
+ CY_LOCK(info, flags);
+ }
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
#ifdef CY_DEBUG_OTHER
- printk(" cyc:cy_close done\n");
+ printk(" cyc:cy_close done\n");
#endif
- CY_UNLOCK(info, flags);
- return;
-} /* cy_close */
-
+ CY_UNLOCK(info, flags);
+} /* cy_close */
/* This routine gets called when tty_write has put something into
* the write_queue. The characters may come from user space or
* If the port is already active, there is no need to kick it.
*
*/
-static int
-cy_write(struct tty_struct * tty, const unsigned char *buf, int count)
+static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- unsigned long flags;
- int c, ret = 0;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ unsigned long flags;
+ int c, ret = 0;
#ifdef CY_DEBUG_IO
- printk("cyc:cy_write ttyC%d\n", info->line); /* */
+ printk("cyc:cy_write ttyC%d\n", info->line); /* */
#endif
- if (serial_paranoia_check(info, tty->name, "cy_write")){
- return 0;
- }
-
- if (!info->xmit_buf)
- return 0;
+ if (serial_paranoia_check(info, tty->name, "cy_write")) {
+ return 0;
+ }
+
+ if (!info->xmit_buf)
+ return 0;
+
+ CY_LOCK(info, flags);
+ while (1) {
+ c = min(count, min((int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1),
+ (int)(SERIAL_XMIT_SIZE - info->xmit_head)));
+
+ if (c <= 0)
+ break;
+
+ memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ info->xmit_head = (info->xmit_head + c) &
+ (SERIAL_XMIT_SIZE - 1);
+ info->xmit_cnt += c;
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ CY_UNLOCK(info, flags);
- CY_LOCK(info, flags);
- while (1) {
- c = min(count, min((int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1),
- (int)(SERIAL_XMIT_SIZE - info->xmit_head)));
-
- if (c <= 0)
- break;
-
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt += c;
- buf += c;
- count -= c;
- ret += c;
- }
- CY_UNLOCK(info, flags);
-
- info->idle_stats.xmit_bytes += ret;
- info->idle_stats.xmit_idle = jiffies;
-
- if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
- start_xmit(info);
- }
- return ret;
-} /* cy_write */
+ info->idle_stats.xmit_bytes += ret;
+ info->idle_stats.xmit_idle = jiffies;
+ if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
+ start_xmit(info);
+ }
+ return ret;
+} /* cy_write */
/*
* This routine is called by the kernel to write a single
* done stuffing characters into the driver. If there is no room
* in the queue, the character is ignored.
*/
-static void
-cy_put_char(struct tty_struct *tty, unsigned char ch)
+static void cy_put_char(struct tty_struct *tty, unsigned char ch)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- unsigned long flags;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ unsigned long flags;
#ifdef CY_DEBUG_IO
- printk("cyc:cy_put_char ttyC%d\n", info->line);
+ printk("cyc:cy_put_char ttyC%d\n", info->line);
#endif
- if (serial_paranoia_check(info, tty->name, "cy_put_char"))
- return;
+ if (serial_paranoia_check(info, tty->name, "cy_put_char"))
+ return;
- if (!info->xmit_buf)
- return;
+ if (!info->xmit_buf)
+ return;
- CY_LOCK(info, flags);
- if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
- CY_UNLOCK(info, flags);
- return;
- }
+ CY_LOCK(info, flags);
+ if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) {
+ CY_UNLOCK(info, flags);
+ return;
+ }
- info->xmit_buf[info->xmit_head++] = ch;
- info->xmit_head &= SERIAL_XMIT_SIZE - 1;
- info->xmit_cnt++;
+ info->xmit_buf[info->xmit_head++] = ch;
+ info->xmit_head &= SERIAL_XMIT_SIZE - 1;
+ info->xmit_cnt++;
info->idle_stats.xmit_bytes++;
info->idle_stats.xmit_idle = jiffies;
- CY_UNLOCK(info, flags);
-} /* cy_put_char */
-
+ CY_UNLOCK(info, flags);
+} /* cy_put_char */
/*
* This routine is called by the kernel after it has written a
* series of characters to the tty device using put_char().
*/
-static void
-cy_flush_chars(struct tty_struct *tty)
+static void cy_flush_chars(struct tty_struct *tty)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
-
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+
#ifdef CY_DEBUG_IO
- printk("cyc:cy_flush_chars ttyC%d\n", info->line); /* */
+ printk("cyc:cy_flush_chars ttyC%d\n", info->line); /* */
#endif
- if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
- return;
-
- if (info->xmit_cnt <= 0 || tty->stopped
- || tty->hw_stopped || !info->xmit_buf)
- return;
+ if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
+ return;
- start_xmit(info);
-} /* cy_flush_chars */
+ if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+ !info->xmit_buf)
+ return;
+ start_xmit(info);
+} /* cy_flush_chars */
/*
* This routine returns the numbers of characters the tty driver
* to change as output buffers get emptied, or if the output flow
* control is activated.
*/
-static int
-cy_write_room(struct tty_struct *tty)
+static int cy_write_room(struct tty_struct *tty)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- int ret;
-
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ int ret;
+
#ifdef CY_DEBUG_IO
- printk("cyc:cy_write_room ttyC%d\n", info->line); /* */
+ printk("cyc:cy_write_room ttyC%d\n", info->line); /* */
#endif
- if (serial_paranoia_check(info, tty->name, "cy_write_room"))
- return 0;
- ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-} /* cy_write_room */
+ if (serial_paranoia_check(info, tty->name, "cy_write_room"))
+ return 0;
+ ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+ if (ret < 0)
+ ret = 0;
+ return ret;
+} /* cy_write_room */
-
-static int
-cy_chars_in_buffer(struct tty_struct *tty)
+static int cy_chars_in_buffer(struct tty_struct *tty)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- int card, channel;
-
- if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
- return 0;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ int card, channel;
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
+ if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
+ return 0;
+
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
#ifdef Z_EXT_CHARS_IN_BUFFER
- if (!IS_CYC_Z(cy_card[card])) {
-#endif /* Z_EXT_CHARS_IN_BUFFER */
+ if (!IS_CYC_Z(cy_card[card])) {
+#endif /* Z_EXT_CHARS_IN_BUFFER */
#ifdef CY_DEBUG_IO
- printk("cyc:cy_chars_in_buffer ttyC%d %d\n",
- info->line, info->xmit_cnt); /* */
+ printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt); /* */
#endif
- return info->xmit_cnt;
+ return info->xmit_cnt;
#ifdef Z_EXT_CHARS_IN_BUFFER
- } else {
- static volatile struct FIRM_ID *firm_id;
- static volatile struct ZFW_CTRL *zfw_ctrl;
- static volatile struct CH_CTRL *ch_ctrl;
- static volatile struct BUF_CTRL *buf_ctrl;
- int char_count;
- volatile uclong tx_put, tx_get, tx_bufsize;
-
- firm_id = cy_card[card].base_addr + ID_ADDRESS;
- zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
- buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
- tx_get = cy_readl(&buf_ctrl->tx_get);
- tx_put = cy_readl(&buf_ctrl->tx_put);
- tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize);
- if (tx_put >= tx_get)
- char_count = tx_put - tx_get;
- else
- char_count = tx_put - tx_get + tx_bufsize;
+ } else {
+ static volatile struct FIRM_ID *firm_id;
+ static volatile struct ZFW_CTRL *zfw_ctrl;
+ static volatile struct CH_CTRL *ch_ctrl;
+ static volatile struct BUF_CTRL *buf_ctrl;
+ int char_count;
+ volatile uclong tx_put, tx_get, tx_bufsize;
+
+ firm_id = cy_card[card].base_addr + ID_ADDRESS;
+ zfw_ctrl = cy_card[card].base_addr +
+ (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
+ ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
+ buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
+
+ tx_get = cy_readl(&buf_ctrl->tx_get);
+ tx_put = cy_readl(&buf_ctrl->tx_put);
+ tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize);
+ if (tx_put >= tx_get)
+ char_count = tx_put - tx_get;
+ else
+ char_count = tx_put - tx_get + tx_bufsize;
#ifdef CY_DEBUG_IO
- printk("cyc:cy_chars_in_buffer ttyC%d %d\n",
- info->line, info->xmit_cnt + char_count); /* */
+ printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt + char_count); /* */
#endif
- return (info->xmit_cnt + char_count);
- }
-#endif /* Z_EXT_CHARS_IN_BUFFER */
-} /* cy_chars_in_buffer */
-
+ return info->xmit_cnt + char_count;
+ }
+#endif /* Z_EXT_CHARS_IN_BUFFER */
+} /* cy_chars_in_buffer */
/*
* ------------------------------------------------------------
* ------------------------------------------------------------
*/
-static void
-cyy_baud_calc(struct cyclades_port *info, uclong baud)
+static void cyy_baud_calc(struct cyclades_port *info, uclong baud)
{
- int co, co_val, bpr;
- uclong cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : 25000000);
-
- if (baud == 0) {
- info->tbpr = info->tco = info->rbpr = info->rco = 0;
- return;
- }
-
- /* determine which prescaler to use */
- for (co = 4, co_val = 2048; co; co--, co_val >>= 2) {
- if (cy_clock / co_val / baud > 63)
- break;
- }
-
- bpr = (cy_clock / co_val * 2 / baud + 1) / 2;
- if (bpr > 255)
- bpr = 255;
-
- info->tbpr = info->rbpr = bpr;
- info->tco = info->rco = co;
+ int co, co_val, bpr;
+ uclong cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 :
+ 25000000);
+
+ if (baud == 0) {
+ info->tbpr = info->tco = info->rbpr = info->rco = 0;
+ return;
+ }
+
+ /* determine which prescaler to use */
+ for (co = 4, co_val = 2048; co; co--, co_val >>= 2) {
+ if (cy_clock / co_val / baud > 63)
+ break;
+ }
+
+ bpr = (cy_clock / co_val * 2 / baud + 1) / 2;
+ if (bpr > 255)
+ bpr = 255;
+
+ info->tbpr = info->rbpr = bpr;
+ info->tco = info->rco = co;
}
/*
* This routine finds or computes the various line characteristics.
* It used to be called config_setup
*/
-static void
-set_line_char(struct cyclades_port * info)
+static void set_line_char(struct cyclades_port *info)
{
- unsigned long flags;
- void __iomem *base_addr;
- int card,chip,channel,index;
- unsigned cflag, iflag;
- unsigned short chip_number;
- int baud, baud_rate = 0;
- int i;
-
-
- if (!info->tty || !info->tty->termios){
- return;
- }
- if (info->line == -1){
- return;
- }
- cflag = info->tty->termios->c_cflag;
- iflag = info->tty->termios->c_iflag;
-
- /*
- * Set up the tty->alt_speed kludge
- */
- if (info->tty) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->tty->alt_speed = 460800;
- }
-
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
- chip_number = channel / 4;
-
- if (!IS_CYC_Z(cy_card[card])) {
-
- index = cy_card[card].bus_index;
-
- /* baud rate */
- baud = tty_get_baud_rate(info->tty);
- if ((baud == 38400) &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) {
- if (info->custom_divisor)
- baud_rate = info->baud / info->custom_divisor;
- else
- baud_rate = info->baud;
- } else if (baud > CD1400_MAX_SPEED) {
- baud = CD1400_MAX_SPEED;
+ unsigned long flags;
+ void __iomem *base_addr;
+ int card, chip, channel, index;
+ unsigned cflag, iflag;
+ unsigned short chip_number;
+ int baud, baud_rate = 0;
+ int i;
+
+ if (!info->tty || !info->tty->termios) {
+ return;
}
- /* find the baud index */
- for (i = 0; i < 20; i++) {
- if (baud == baud_table[i]) {
- break;
- }
+ if (info->line == -1) {
+ return;
}
- if (i == 20) {
- i = 19; /* CD1400_MAX_SPEED */
- }
+ cflag = info->tty->termios->c_cflag;
+ iflag = info->tty->termios->c_iflag;
- if ((baud == 38400) &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) {
- cyy_baud_calc(info, baud_rate);
- } else {
- if(info->chip_rev >= CD1400_REV_J) {
- /* It is a CD1400 rev. J or later */
- info->tbpr = baud_bpr_60[i]; /* Tx BPR */
- info->tco = baud_co_60[i]; /* Tx CO */
- info->rbpr = baud_bpr_60[i]; /* Rx BPR */
- info->rco = baud_co_60[i]; /* Rx CO */
- } else {
- info->tbpr = baud_bpr_25[i]; /* Tx BPR */
- info->tco = baud_co_25[i]; /* Tx CO */
- info->rbpr = baud_bpr_25[i]; /* Rx BPR */
- info->rco = baud_co_25[i]; /* Rx CO */
- }
- }
- if (baud_table[i] == 134) {
- /* get it right for 134.5 baud */
- info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2;
- } else if ((baud == 38400) &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) {
- info->timeout = (info->xmit_fifo_size*HZ*15/baud_rate) + 2;
- } else if (baud_table[i]) {
- info->timeout = (info->xmit_fifo_size*HZ*15/baud_table[i]) + 2;
- /* this needs to be propagated into the card info */
- } else {
- info->timeout = 0;
- }
- /* By tradition (is it a standard?) a baud rate of zero
- implies the line should be/has been closed. A bit
- later in this routine such a test is performed. */
-
- /* byte size and parity */
- info->cor5 = 0;
- info->cor4 = 0;
- info->cor3 = (info->default_threshold
- ? info->default_threshold
- : baud_cor3[i]); /* receive threshold */
- info->cor2 = CyETC;
- switch(cflag & CSIZE){
- case CS5:
- info->cor1 = Cy_5_BITS;
- break;
- case CS6:
- info->cor1 = Cy_6_BITS;
- break;
- case CS7:
- info->cor1 = Cy_7_BITS;
- break;
- case CS8:
- info->cor1 = Cy_8_BITS;
- break;
- }
- if(cflag & CSTOPB){
- info->cor1 |= Cy_2_STOP;
- }
- if (cflag & PARENB){
- if (cflag & PARODD){
- info->cor1 |= CyPARITY_O;
- }else{
- info->cor1 |= CyPARITY_E;
- }
- }else{
- info->cor1 |= CyPARITY_NONE;
- }
-
- /* CTS flow control flag */
- if (cflag & CRTSCTS){
- info->flags |= ASYNC_CTS_FLOW;
- info->cor2 |= CyCtsAE;
- }else{
- info->flags &= ~ASYNC_CTS_FLOW;
- info->cor2 &= ~CyCtsAE;
+ /*
+ * Set up the tty->alt_speed kludge
+ */
+ if (info->tty) {
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->tty->alt_speed = 57600;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->tty->alt_speed = 115200;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->tty->alt_speed = 230400;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->tty->alt_speed = 460800;
}
- if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
- else
- info->flags |= ASYNC_CHECK_CD;
+
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
+ chip_number = channel / 4;
+
+ if (!IS_CYC_Z(cy_card[card])) {
+
+ index = cy_card[card].bus_index;
+
+ /* baud rate */
+ baud = tty_get_baud_rate(info->tty);
+ if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ ASYNC_SPD_CUST) {
+ if (info->custom_divisor)
+ baud_rate = info->baud / info->custom_divisor;
+ else
+ baud_rate = info->baud;
+ } else if (baud > CD1400_MAX_SPEED) {
+ baud = CD1400_MAX_SPEED;
+ }
+ /* find the baud index */
+ for (i = 0; i < 20; i++) {
+ if (baud == baud_table[i]) {
+ break;
+ }
+ }
+ if (i == 20) {
+ i = 19; /* CD1400_MAX_SPEED */
+ }
+
+ if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ ASYNC_SPD_CUST) {
+ cyy_baud_calc(info, baud_rate);
+ } else {
+ if (info->chip_rev >= CD1400_REV_J) {
+ /* It is a CD1400 rev. J or later */
+ info->tbpr = baud_bpr_60[i]; /* Tx BPR */
+ info->tco = baud_co_60[i]; /* Tx CO */
+ info->rbpr = baud_bpr_60[i]; /* Rx BPR */
+ info->rco = baud_co_60[i]; /* Rx CO */
+ } else {
+ info->tbpr = baud_bpr_25[i]; /* Tx BPR */
+ info->tco = baud_co_25[i]; /* Tx CO */
+ info->rbpr = baud_bpr_25[i]; /* Rx BPR */
+ info->rco = baud_co_25[i]; /* Rx CO */
+ }
+ }
+ if (baud_table[i] == 134) {
+ /* get it right for 134.5 baud */
+ info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
+ 2;
+ } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ ASYNC_SPD_CUST) {
+ info->timeout = (info->xmit_fifo_size * HZ * 15 /
+ baud_rate) + 2;
+ } else if (baud_table[i]) {
+ info->timeout = (info->xmit_fifo_size * HZ * 15 /
+ baud_table[i]) + 2;
+ /* this needs to be propagated into the card info */
+ } else {
+ info->timeout = 0;
+ }
+ /* By tradition (is it a standard?) a baud rate of zero
+ implies the line should be/has been closed. A bit
+ later in this routine such a test is performed. */
+
+ /* byte size and parity */
+ info->cor5 = 0;
+ info->cor4 = 0;
+ /* receive threshold */
+ info->cor3 = (info->default_threshold ?
+ info->default_threshold : baud_cor3[i]);
+ info->cor2 = CyETC;
+ switch (cflag & CSIZE) {
+ case CS5:
+ info->cor1 = Cy_5_BITS;
+ break;
+ case CS6:
+ info->cor1 = Cy_6_BITS;
+ break;
+ case CS7:
+ info->cor1 = Cy_7_BITS;
+ break;
+ case CS8:
+ info->cor1 = Cy_8_BITS;
+ break;
+ }
+ if (cflag & CSTOPB) {
+ info->cor1 |= Cy_2_STOP;
+ }
+ if (cflag & PARENB) {
+ if (cflag & PARODD) {
+ info->cor1 |= CyPARITY_O;
+ } else {
+ info->cor1 |= CyPARITY_E;
+ }
+ } else {
+ info->cor1 |= CyPARITY_NONE;
+ }
+
+ /* CTS flow control flag */
+ if (cflag & CRTSCTS) {
+ info->flags |= ASYNC_CTS_FLOW;
+ info->cor2 |= CyCtsAE;
+ } else {
+ info->flags &= ~ASYNC_CTS_FLOW;
+ info->cor2 &= ~CyCtsAE;
+ }
+ if (cflag & CLOCAL)
+ info->flags &= ~ASYNC_CHECK_CD;
+ else
+ info->flags |= ASYNC_CHECK_CD;
/***********************************************
The hardware option, CyRtsAO, presents RTS when
cable. Contact Marcio Saito for details.
***********************************************/
- chip = channel>>2;
- channel &= 0x03;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
+ chip = channel >> 2;
+ channel &= 0x03;
+ base_addr = cy_card[card].base_addr +
+ (cy_chip_offset[chip] << index);
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
-
- /* tx and rx baud rate */
-
- cy_writeb(base_addr+(CyTCOR<<index), info->tco);
- cy_writeb(base_addr+(CyTBPR<<index), info->tbpr);
- cy_writeb(base_addr+(CyRCOR<<index), info->rco);
- cy_writeb(base_addr+(CyRBPR<<index), info->rbpr);
-
- /* set line characteristics according configuration */
-
- cy_writeb(base_addr+(CySCHR1<<index),
- START_CHAR(info->tty));
- cy_writeb(base_addr+(CySCHR2<<index),
- STOP_CHAR(info->tty));
- cy_writeb(base_addr+(CyCOR1<<index), info->cor1);
- cy_writeb(base_addr+(CyCOR2<<index), info->cor2);
- cy_writeb(base_addr+(CyCOR3<<index), info->cor3);
- cy_writeb(base_addr+(CyCOR4<<index), info->cor4);
- cy_writeb(base_addr+(CyCOR5<<index), info->cor5);
-
- cyy_issue_cmd(base_addr,
- CyCOR_CHANGE|CyCOR1ch|CyCOR2ch|CyCOR3ch,index);
-
- cy_writeb(base_addr+(CyCAR<<index),
- (u_char)channel); /* !!! Is this needed? */
- cy_writeb(base_addr+(CyRTPR<<index), (info->default_timeout
- ? info->default_timeout
- : 0x02)); /* 10ms rx timeout */
-
- if (C_CLOCAL(info->tty)) {
- /* without modem intr */
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) | CyMdmCh);
- /* act on 1->0 modem transitions */
- if ((cflag & CRTSCTS) && info->rflow) {
- cy_writeb(base_addr+(CyMCOR1<<index),
- (CyCTS|rflow_thr[i]));
- } else {
- cy_writeb(base_addr+(CyMCOR1<<index), CyCTS);
- }
- /* act on 0->1 modem transitions */
- cy_writeb(base_addr+(CyMCOR2<<index), CyCTS);
- } else {
- /* without modem intr */
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) | CyMdmCh);
- /* act on 1->0 modem transitions */
- if ((cflag & CRTSCTS) && info->rflow) {
- cy_writeb(base_addr+(CyMCOR1<<index),
- (CyDSR|CyCTS|CyRI|CyDCD|rflow_thr[i]));
- } else {
- cy_writeb(base_addr+(CyMCOR1<<index),
- CyDSR|CyCTS|CyRI|CyDCD);
- }
- /* act on 0->1 modem transitions */
- cy_writeb(base_addr+(CyMCOR2<<index),
- CyDSR|CyCTS|CyRI|CyDCD);
- }
-
- if(i == 0){ /* baud rate is zero, turn off line */
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr+(CyMSVR1<<index), ~CyRTS);
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+
+ /* tx and rx baud rate */
+
+ cy_writeb(base_addr + (CyTCOR << index), info->tco);
+ cy_writeb(base_addr + (CyTBPR << index), info->tbpr);
+ cy_writeb(base_addr + (CyRCOR << index), info->rco);
+ cy_writeb(base_addr + (CyRBPR << index), info->rbpr);
+
+ /* set line characteristics according configuration */
+
+ cy_writeb(base_addr + (CySCHR1 << index),
+ START_CHAR(info->tty));
+ cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->tty));
+ cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
+ cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
+ cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
+ cy_writeb(base_addr + (CyCOR4 << index), info->cor4);
+ cy_writeb(base_addr + (CyCOR5 << index), info->cor5);
+
+ cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
+ CyCOR3ch, index);
+
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel); /* !!! Is this needed? */
+ cy_writeb(base_addr + (CyRTPR << index),
+ (info->default_timeout ? info->default_timeout : 0x02));
+ /* 10ms rx timeout */
+
+ if (C_CLOCAL(info->tty)) {
+ /* without modem intr */
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr +
+ (CySRER << index)) | CyMdmCh);
+ /* act on 1->0 modem transitions */
+ if ((cflag & CRTSCTS) && info->rflow) {
+ cy_writeb(base_addr + (CyMCOR1 << index),
+ (CyCTS | rflow_thr[i]));
+ } else {
+ cy_writeb(base_addr + (CyMCOR1 << index),
+ CyCTS);
+ }
+ /* act on 0->1 modem transitions */
+ cy_writeb(base_addr + (CyMCOR2 << index), CyCTS);
} else {
- cy_writeb(base_addr+(CyMSVR2<<index), ~CyDTR);
+ /* without modem intr */
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr +
+ (CySRER << index)) | CyMdmCh);
+ /* act on 1->0 modem transitions */
+ if ((cflag & CRTSCTS) && info->rflow) {
+ cy_writeb(base_addr + (CyMCOR1 << index),
+ (CyDSR | CyCTS | CyRI | CyDCD |
+ rflow_thr[i]));
+ } else {
+ cy_writeb(base_addr + (CyMCOR1 << index),
+ CyDSR | CyCTS | CyRI | CyDCD);
+ }
+ /* act on 0->1 modem transitions */
+ cy_writeb(base_addr + (CyMCOR2 << index),
+ CyDSR | CyCTS | CyRI | CyDCD);
}
+
+ if (i == 0) { /* baud rate is zero, turn off line */
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR1 << index),
+ ~CyRTS);
+ } else {
+ cy_writeb(base_addr + (CyMSVR2 << index),
+ ~CyDTR);
+ }
#ifdef CY_DEBUG_DTR
- printk("cyc:set_line_char dropping DTR\n");
- printk(" status: 0x%x, 0x%x\n",
- cy_readb(base_addr+(CyMSVR1<<index)),
- cy_readb(base_addr+(CyMSVR2<<index)));
+ printk("cyc:set_line_char dropping DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr + (CyMSVR1 << index)),
+ cy_readb(base_addr + (CyMSVR2 << index)));
#endif
- }else{
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr+(CyMSVR1<<index), CyRTS);
- } else {
- cy_writeb(base_addr+(CyMSVR2<<index), CyDTR);
- }
+ } else {
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR1 << index),
+ CyRTS);
+ } else {
+ cy_writeb(base_addr + (CyMSVR2 << index),
+ CyDTR);
+ }
#ifdef CY_DEBUG_DTR
- printk("cyc:set_line_char raising DTR\n");
- printk(" status: 0x%x, 0x%x\n",
- cy_readb(base_addr+(CyMSVR1<<index)),
- cy_readb(base_addr+(CyMSVR2<<index)));
+ printk("cyc:set_line_char raising DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr + (CyMSVR1 << index)),
+ cy_readb(base_addr + (CyMSVR2 << index)));
#endif
- }
-
- if (info->tty){
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- CY_UNLOCK(info, flags);
+ }
- } else {
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
- struct BUF_CTRL __iomem *buf_ctrl;
- uclong sw_flow;
- int retval;
-
- firm_id = cy_card[card].base_addr + ID_ADDRESS;
- if (!ISZLOADED(cy_card[card])) {
- return;
- }
+ if (info->tty) {
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+ CY_UNLOCK(info, flags);
- zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
- buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
-
- /* baud rate */
- baud = tty_get_baud_rate(info->tty);
- if ((baud == 38400) &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) {
- if (info->custom_divisor)
- baud_rate = info->baud / info->custom_divisor;
- else
- baud_rate = info->baud;
- } else if (baud > CYZ_MAX_SPEED) {
- baud = CYZ_MAX_SPEED;
- }
- cy_writel(&ch_ctrl->comm_baud , baud);
-
- if (baud == 134) {
- /* get it right for 134.5 baud */
- info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2;
- } else if ((baud == 38400) &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) {
- info->timeout = (info->xmit_fifo_size*HZ*15/baud_rate) + 2;
- } else if (baud) {
- info->timeout = (info->xmit_fifo_size*HZ*15/baud) + 2;
- /* this needs to be propagated into the card info */
} else {
- info->timeout = 0;
- }
+ struct FIRM_ID __iomem *firm_id;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+ struct CH_CTRL __iomem *ch_ctrl;
+ struct BUF_CTRL __iomem *buf_ctrl;
+ uclong sw_flow;
+ int retval;
+
+ firm_id = cy_card[card].base_addr + ID_ADDRESS;
+ if (!ISZLOADED(cy_card[card])) {
+ return;
+ }
- /* byte size and parity */
- switch(cflag & CSIZE){
- case CS5: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS5); break;
- case CS6: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS6); break;
- case CS7: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS7); break;
- case CS8: cy_writel(&ch_ctrl->comm_data_l , C_DL_CS8); break;
- }
- if(cflag & CSTOPB){
- cy_writel(&ch_ctrl->comm_data_l,
- cy_readl(&ch_ctrl->comm_data_l) | C_DL_2STOP);
- }else{
- cy_writel(&ch_ctrl->comm_data_l,
- cy_readl(&ch_ctrl->comm_data_l) | C_DL_1STOP);
- }
- if (cflag & PARENB){
- if (cflag & PARODD){
- cy_writel(&ch_ctrl->comm_parity , C_PR_ODD);
- }else{
- cy_writel(&ch_ctrl->comm_parity , C_PR_EVEN);
- }
- }else{
- cy_writel(&ch_ctrl->comm_parity , C_PR_NONE);
- }
+ zfw_ctrl = cy_card[card].base_addr +
+ (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
+ buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
+
+ /* baud rate */
+ baud = tty_get_baud_rate(info->tty);
+ if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ ASYNC_SPD_CUST) {
+ if (info->custom_divisor)
+ baud_rate = info->baud / info->custom_divisor;
+ else
+ baud_rate = info->baud;
+ } else if (baud > CYZ_MAX_SPEED) {
+ baud = CYZ_MAX_SPEED;
+ }
+ cy_writel(&ch_ctrl->comm_baud, baud);
+
+ if (baud == 134) {
+ /* get it right for 134.5 baud */
+ info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
+ 2;
+ } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+ ASYNC_SPD_CUST) {
+ info->timeout = (info->xmit_fifo_size * HZ * 15 /
+ baud_rate) + 2;
+ } else if (baud) {
+ info->timeout = (info->xmit_fifo_size * HZ * 15 /
+ baud) + 2;
+ /* this needs to be propagated into the card info */
+ } else {
+ info->timeout = 0;
+ }
- /* CTS flow control flag */
- if (cflag & CRTSCTS){
- cy_writel(&ch_ctrl->hw_flow,
- cy_readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS);
- }else{
- cy_writel(&ch_ctrl->hw_flow,
- cy_readl(&ch_ctrl->hw_flow) & ~(C_RS_CTS | C_RS_RTS));
- }
- /* As the HW flow control is done in firmware, the driver doesn't
- need to care about it */
- info->flags &= ~ASYNC_CTS_FLOW;
-
- /* XON/XOFF/XANY flow control flags */
- sw_flow = 0;
- if (iflag & IXON){
- sw_flow |= C_FL_OXX;
- if (iflag & IXANY)
- sw_flow |= C_FL_OIXANY;
- }
- cy_writel(&ch_ctrl->sw_flow, sw_flow);
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5:
+ cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5);
+ break;
+ case CS6:
+ cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6);
+ break;
+ case CS7:
+ cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7);
+ break;
+ case CS8:
+ cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8);
+ break;
+ }
+ if (cflag & CSTOPB) {
+ cy_writel(&ch_ctrl->comm_data_l,
+ cy_readl(&ch_ctrl->comm_data_l) | C_DL_2STOP);
+ } else {
+ cy_writel(&ch_ctrl->comm_data_l,
+ cy_readl(&ch_ctrl->comm_data_l) | C_DL_1STOP);
+ }
+ if (cflag & PARENB) {
+ if (cflag & PARODD) {
+ cy_writel(&ch_ctrl->comm_parity, C_PR_ODD);
+ } else {
+ cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN);
+ }
+ } else {
+ cy_writel(&ch_ctrl->comm_parity, C_PR_NONE);
+ }
- retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L);
- if (retval != 0){
- printk("cyc:set_line_char retval on ttyC%d was %x\n",
- info->line, retval);
- }
+ /* CTS flow control flag */
+ if (cflag & CRTSCTS) {
+ cy_writel(&ch_ctrl->hw_flow,
+ cy_readl(&ch_ctrl->
+ hw_flow) | C_RS_CTS | C_RS_RTS);
+ } else {
+ cy_writel(&ch_ctrl->hw_flow,
+ cy_readl(&ch_ctrl->
+ hw_flow) & ~(C_RS_CTS | C_RS_RTS));
+ }
+ /* As the HW flow control is done in firmware, the driver
+ doesn't need to care about it */
+ info->flags &= ~ASYNC_CTS_FLOW;
+
+ /* XON/XOFF/XANY flow control flags */
+ sw_flow = 0;
+ if (iflag & IXON) {
+ sw_flow |= C_FL_OXX;
+ if (iflag & IXANY)
+ sw_flow |= C_FL_OIXANY;
+ }
+ cy_writel(&ch_ctrl->sw_flow, sw_flow);
- /* CD sensitivity */
- if (cflag & CLOCAL){
- info->flags &= ~ASYNC_CHECK_CD;
- }else{
- info->flags |= ASYNC_CHECK_CD;
- }
+ retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L);
+ if (retval != 0) {
+ printk("cyc:set_line_char retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
+
+ /* CD sensitivity */
+ if (cflag & CLOCAL) {
+ info->flags &= ~ASYNC_CHECK_CD;
+ } else {
+ info->flags |= ASYNC_CHECK_CD;
+ }
- if(baud == 0){ /* baud rate is zero, turn off line */
- cy_writel(&ch_ctrl->rs_control,
- cy_readl(&ch_ctrl->rs_control) & ~C_RS_DTR);
+ if (baud == 0) { /* baud rate is zero, turn off line */
+ cy_writel(&ch_ctrl->rs_control,
+ cy_readl(&ch_ctrl->rs_control) & ~C_RS_DTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:set_line_char dropping Z DTR\n");
+ printk("cyc:set_line_char dropping Z DTR\n");
#endif
- }else{
- cy_writel(&ch_ctrl->rs_control,
- cy_readl(&ch_ctrl->rs_control) | C_RS_DTR);
+ } else {
+ cy_writel(&ch_ctrl->rs_control,
+ cy_readl(&ch_ctrl->rs_control) | C_RS_DTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:set_line_char raising Z DTR\n");
+ printk("cyc:set_line_char raising Z DTR\n");
#endif
- }
+ }
- retval = cyz_issue_cmd( &cy_card[card], channel, C_CM_IOCTLM, 0L);
- if (retval != 0){
- printk("cyc:set_line_char(2) retval on ttyC%d was %x\n",
- info->line, retval);
- }
+ retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTLM,0L);
+ if (retval != 0) {
+ printk("cyc:set_line_char(2) retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
- if (info->tty){
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if (info->tty) {
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
}
- }
-} /* set_line_char */
-
+} /* set_line_char */
static int
-get_serial_info(struct cyclades_port * info,
- struct serial_struct __user * retinfo)
+get_serial_info(struct cyclades_port *info,
+ struct serial_struct __user * retinfo)
{
- struct serial_struct tmp;
- struct cyclades_card *cinfo = &cy_card[info->card];
-
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->line;
- tmp.port = info->card * 0x100 + info->line - cinfo->first_line;
- tmp.irq = cinfo->irq;
- tmp.flags = info->flags;
- tmp.close_delay = info->close_delay;
- tmp.baud_base = info->baud;
- tmp.custom_divisor = info->custom_divisor;
- tmp.hub6 = 0; /*!!!*/
- return copy_to_user(retinfo,&tmp,sizeof(*retinfo))?-EFAULT:0;
-} /* get_serial_info */
+ struct serial_struct tmp;
+ struct cyclades_card *cinfo = &cy_card[info->card];
+ if (!retinfo)
+ return -EFAULT;
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = info->type;
+ tmp.line = info->line;
+ tmp.port = info->card * 0x100 + info->line - cinfo->first_line;
+ tmp.irq = cinfo->irq;
+ tmp.flags = info->flags;
+ tmp.close_delay = info->close_delay;
+ tmp.baud_base = info->baud;
+ tmp.custom_divisor = info->custom_divisor;
+ tmp.hub6 = 0; /*!!! */
+ return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
+} /* get_serial_info */
static int
-set_serial_info(struct cyclades_port * info,
- struct serial_struct __user * new_info)
+set_serial_info(struct cyclades_port *info,
+ struct serial_struct __user * new_info)
{
- struct serial_struct new_serial;
- struct cyclades_port old_info;
-
- if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
- return -EFAULT;
- old_info = *info;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.close_delay != info->close_delay) ||
- (new_serial.baud_base != info->baud) ||
- ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) !=
- (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)))
- return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- info->baud = new_serial.baud_base;
- info->custom_divisor = new_serial.custom_divisor;
- goto check_and_exit;
- }
-
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
-
- info->baud = new_serial.baud_base;
- info->custom_divisor = new_serial.custom_divisor;
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->close_delay = new_serial.close_delay * HZ/100;
- info->closing_wait = new_serial.closing_wait * HZ/100;
+ struct serial_struct new_serial;
+ struct cyclades_port old_info;
+
+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+ return -EFAULT;
+ old_info = *info;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if (new_serial.close_delay != info->close_delay ||
+ new_serial.baud_base != info->baud ||
+ (new_serial.flags & ASYNC_FLAGS &
+ ~ASYNC_USR_MASK) !=
+ (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
+ return -EPERM;
+ info->flags = (info->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK);
+ info->baud = new_serial.baud_base;
+ info->custom_divisor = new_serial.custom_divisor;
+ goto check_and_exit;
+ }
+
+ /*
+ * OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+
+ info->baud = new_serial.baud_base;
+ info->custom_divisor = new_serial.custom_divisor;
+ info->flags = (info->flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS);
+ info->close_delay = new_serial.close_delay * HZ / 100;
+ info->closing_wait = new_serial.closing_wait * HZ / 100;
check_and_exit:
- if (info->flags & ASYNC_INITIALIZED){
- set_line_char(info);
- return 0;
- }else{
- return startup(info);
- }
-} /* set_serial_info */
+ if (info->flags & ASYNC_INITIALIZED) {
+ set_line_char(info);
+ return 0;
+ } else {
+ return startup(info);
+ }
+} /* set_serial_info */
/*
* get_lsr_info - get line status register info
* transmit holding register is empty. This functionality
* allows an RS485 driver to be written in user space.
*/
-static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
+static int get_lsr_info(struct cyclades_port *info, unsigned int __user * value)
{
- int card, chip, channel, index;
- unsigned char status;
- unsigned int result;
- unsigned long flags;
- void __iomem *base_addr;
-
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
+ int card, chip, channel, index;
+ unsigned char status;
+ unsigned int result;
+ unsigned long flags;
+ void __iomem *base_addr;
- CY_LOCK(info, flags);
- status = cy_readb(base_addr+(CySRER<<index)) & (CyTxRdy|CyTxMpty);
- CY_UNLOCK(info, flags);
- result = (status ? 0 : TIOCSER_TEMT);
- } else {
- /* Not supported yet */
- return -EINVAL;
- }
- return put_user(result, (unsigned long __user *) value);
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr =
+ cy_card[card].base_addr + (cy_chip_offset[chip] << index);
+
+ CY_LOCK(info, flags);
+ status = cy_readb(base_addr + (CySRER << index)) &
+ (CyTxRdy | CyTxMpty);
+ CY_UNLOCK(info, flags);
+ result = (status ? 0 : TIOCSER_TEMT);
+ } else {
+ /* Not supported yet */
+ return -EINVAL;
+ }
+ return put_user(result, (unsigned long __user *)value);
}
-static int
-cy_tiocmget(struct tty_struct *tty, struct file *file)
+static int cy_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
- int card,chip,channel,index;
- void __iomem *base_addr;
- unsigned long flags;
- unsigned char status;
- unsigned long lstatus;
- unsigned int result;
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
-
- if (serial_paranoia_check(info, tty->name, __FUNCTION__))
- return -ENODEV;
-
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ int card, chip, channel, index;
+ void __iomem *base_addr;
+ unsigned long flags;
+ unsigned char status;
+ unsigned long lstatus;
+ unsigned int result;
+ struct FIRM_ID __iomem *firm_id;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+ struct CH_CTRL __iomem *ch_ctrl;
+
+ if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ return -ENODEV;
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- status = cy_readb(base_addr+(CyMSVR1<<index));
- status |= cy_readb(base_addr+(CyMSVR2<<index));
- CY_UNLOCK(info, flags);
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr =
+ cy_card[card].base_addr + (cy_chip_offset[chip] << index);
- if (info->rtsdtr_inv) {
- result = ((status & CyRTS) ? TIOCM_DTR : 0)
- | ((status & CyDTR) ? TIOCM_RTS : 0);
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ status = cy_readb(base_addr + (CyMSVR1 << index));
+ status |= cy_readb(base_addr + (CyMSVR2 << index));
+ CY_UNLOCK(info, flags);
+
+ if (info->rtsdtr_inv) {
+ result = ((status & CyRTS) ? TIOCM_DTR : 0) |
+ ((status & CyDTR) ? TIOCM_RTS : 0);
+ } else {
+ result = ((status & CyRTS) ? TIOCM_RTS : 0) |
+ ((status & CyDTR) ? TIOCM_DTR : 0);
+ }
+ result |= ((status & CyDCD) ? TIOCM_CAR : 0) |
+ ((status & CyRI) ? TIOCM_RNG : 0) |
+ ((status & CyDSR) ? TIOCM_DSR : 0) |
+ ((status & CyCTS) ? TIOCM_CTS : 0);
} else {
- result = ((status & CyRTS) ? TIOCM_RTS : 0)
- | ((status & CyDTR) ? TIOCM_DTR : 0);
- }
- result |= ((status & CyDCD) ? TIOCM_CAR : 0)
- | ((status & CyRI) ? TIOCM_RNG : 0)
- | ((status & CyDSR) ? TIOCM_DSR : 0)
- | ((status & CyCTS) ? TIOCM_CTS : 0);
- } else {
- base_addr = cy_card[card].base_addr;
-
- if (cy_card[card].num_chips != -1){
- return -EINVAL;
- }
+ base_addr = cy_card[card].base_addr;
- firm_id = cy_card[card].base_addr + ID_ADDRESS;
- if (ISZLOADED(cy_card[card])) {
- zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
- lstatus = cy_readl(&ch_ctrl[channel].rs_status);
- result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0)
- | ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0)
- | ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0)
- | ((lstatus & C_RS_RI) ? TIOCM_RNG : 0)
- | ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0)
- | ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
- }else{
- result = 0;
- return -ENODEV;
- }
+ if (cy_card[card].num_chips != -1) {
+ return -EINVAL;
+ }
- }
- return result;
-} /* cy_tiomget */
+ firm_id = cy_card[card].base_addr + ID_ADDRESS;
+ if (ISZLOADED(cy_card[card])) {
+ zfw_ctrl = cy_card[card].base_addr +
+ (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = zfw_ctrl->ch_ctrl;
+ lstatus = cy_readl(&ch_ctrl[channel].rs_status);
+ result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
+ ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
+ ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
+ ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
+ ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
+ ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
+ } else {
+ result = 0;
+ return -ENODEV;
+ }
+ }
+ return result;
+} /* cy_tiomget */
static int
cy_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+ unsigned int set, unsigned int clear)
{
- struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
- int card,chip,channel,index;
- void __iomem *base_addr;
- unsigned long flags;
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
- int retval;
-
- if (serial_paranoia_check(info, tty->name, __FUNCTION__))
- return -ENODEV;
-
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
-
- if (set & TIOCM_RTS){
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr+(CyMSVR2<<index), CyDTR);
- } else {
- cy_writeb(base_addr+(CyMSVR1<<index), CyRTS);
- }
- CY_UNLOCK(info, flags);
- }
- if (clear & TIOCM_RTS) {
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr+(CyMSVR2<<index), ~CyDTR);
- } else {
- cy_writeb(base_addr+(CyMSVR1<<index), ~CyRTS);
- }
- CY_UNLOCK(info, flags);
- }
- if (set & TIOCM_DTR){
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr+(CyMSVR1<<index), CyRTS);
- } else {
- cy_writeb(base_addr+(CyMSVR2<<index), CyDTR);
- }
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ int card, chip, channel, index;
+ void __iomem *base_addr;
+ unsigned long flags;
+ struct FIRM_ID __iomem *firm_id;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl;
+ struct CH_CTRL __iomem *ch_ctrl;
+ int retval;
+
+ if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ return -ENODEV;
+
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr =
+ cy_card[card].base_addr + (cy_chip_offset[chip] << index);
+
+ if (set & TIOCM_RTS) {
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR2 << index),
+ CyDTR);
+ } else {
+ cy_writeb(base_addr + (CyMSVR1 << index),
+ CyRTS);
+ }
+ CY_UNLOCK(info, flags);
+ }
+ if (clear & TIOCM_RTS) {
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR2 << index),
+ ~CyDTR);
+ } else {
+ cy_writeb(base_addr + (CyMSVR1 << index),
+ ~CyRTS);
+ }
+ CY_UNLOCK(info, flags);
+ }
+ if (set & TIOCM_DTR) {
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR1 << index),
+ CyRTS);
+ } else {
+ cy_writeb(base_addr + (CyMSVR2 << index),
+ CyDTR);
+ }
#ifdef CY_DEBUG_DTR
- printk("cyc:set_modem_info raising DTR\n");
- printk(" status: 0x%x, 0x%x\n",
- cy_readb(base_addr+(CyMSVR1<<index)),
- cy_readb(base_addr+(CyMSVR2<<index)));
+ printk("cyc:set_modem_info raising DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr + (CyMSVR1 << index)),
+ cy_readb(base_addr + (CyMSVR2 << index)));
#endif
- CY_UNLOCK(info, flags);
- }
- if (clear & TIOCM_DTR) {
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr+(CyMSVR1<<index), ~CyRTS);
- } else {
- cy_writeb(base_addr+(CyMSVR2<<index), ~CyDTR);
- }
+ CY_UNLOCK(info, flags);
+ }
+ if (clear & TIOCM_DTR) {
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR1 << index),
+ ~CyRTS);
+ } else {
+ cy_writeb(base_addr + (CyMSVR2 << index),
+ ~CyDTR);
+ }
#ifdef CY_DEBUG_DTR
- printk("cyc:set_modem_info dropping DTR\n");
- printk(" status: 0x%x, 0x%x\n",
- cy_readb(base_addr+(CyMSVR1<<index)),
- cy_readb(base_addr+(CyMSVR2<<index)));
+ printk("cyc:set_modem_info dropping DTR\n");
+ printk(" status: 0x%x, 0x%x\n",
+ cy_readb(base_addr + (CyMSVR1 << index)),
+ cy_readb(base_addr + (CyMSVR2 << index)));
#endif
- CY_UNLOCK(info, flags);
- }
- } else {
- base_addr = cy_card[card].base_addr;
-
- firm_id = cy_card[card].base_addr + ID_ADDRESS;
- if (ISZLOADED(cy_card[card])) {
- zfw_ctrl = cy_card[card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
-
- if (set & TIOCM_RTS){
- CY_LOCK(info, flags);
- cy_writel(&ch_ctrl[channel].rs_control,
- cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS);
- CY_UNLOCK(info, flags);
- }
- if (clear & TIOCM_RTS) {
- CY_LOCK(info, flags);
- cy_writel(&ch_ctrl[channel].rs_control,
- cy_readl(&ch_ctrl[channel].rs_control) & ~C_RS_RTS);
- CY_UNLOCK(info, flags);
- }
- if (set & TIOCM_DTR){
- CY_LOCK(info, flags);
- cy_writel(&ch_ctrl[channel].rs_control,
- cy_readl(&ch_ctrl[channel].rs_control) | C_RS_DTR);
+ CY_UNLOCK(info, flags);
+ }
+ } else {
+ base_addr = cy_card[card].base_addr;
+
+ firm_id = cy_card[card].base_addr + ID_ADDRESS;
+ if (ISZLOADED(cy_card[card])) {
+ zfw_ctrl = cy_card[card].base_addr +
+ (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff);
+ board_ctrl = &zfw_ctrl->board_ctrl;
+ ch_ctrl = zfw_ctrl->ch_ctrl;
+
+ if (set & TIOCM_RTS) {
+ CY_LOCK(info, flags);
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].
+ rs_control) | C_RS_RTS);
+ CY_UNLOCK(info, flags);
+ }
+ if (clear & TIOCM_RTS) {
+ CY_LOCK(info, flags);
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].
+ rs_control) & ~C_RS_RTS);
+ CY_UNLOCK(info, flags);
+ }
+ if (set & TIOCM_DTR) {
+ CY_LOCK(info, flags);
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].
+ rs_control) | C_RS_DTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:set_modem_info raising Z DTR\n");
+ printk("cyc:set_modem_info raising Z DTR\n");
#endif
- CY_UNLOCK(info, flags);
- }
- if (clear & TIOCM_DTR) {
- CY_LOCK(info, flags);
- cy_writel(&ch_ctrl[channel].rs_control,
- cy_readl(&ch_ctrl[channel].rs_control) & ~C_RS_DTR);
+ CY_UNLOCK(info, flags);
+ }
+ if (clear & TIOCM_DTR) {
+ CY_LOCK(info, flags);
+ cy_writel(&ch_ctrl[channel].rs_control,
+ cy_readl(&ch_ctrl[channel].
+ rs_control) & ~C_RS_DTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:set_modem_info clearing Z DTR\n");
+ printk("cyc:set_modem_info clearing Z DTR\n");
#endif
- CY_UNLOCK(info, flags);
- }
- }else{
- return -ENODEV;
- }
- CY_LOCK(info, flags);
- retval = cyz_issue_cmd(&cy_card[info->card],
- channel, C_CM_IOCTLM,0L);
- if (retval != 0){
- printk("cyc:set_modem_info retval on ttyC%d was %x\n",
- info->line, retval);
+ CY_UNLOCK(info, flags);
+ }
+ } else {
+ return -ENODEV;
+ }
+ CY_LOCK(info, flags);
+ retval = cyz_issue_cmd(&cy_card[info->card],
+ channel, C_CM_IOCTLM, 0L);
+ if (retval != 0) {
+ printk("cyc:set_modem_info retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
+ CY_UNLOCK(info, flags);
}
- CY_UNLOCK(info, flags);
- }
- return 0;
-} /* cy_tiocmset */
+ return 0;
+} /* cy_tiocmset */
/*
* cy_break() --- routine which turns the break handling on or off
*/
-static void
-cy_break(struct tty_struct *tty, int break_state)
+static void cy_break(struct tty_struct *tty, int break_state)
{
- struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "cy_break"))
- return;
-
- CY_LOCK(info, flags);
- if (!IS_CYC_Z(cy_card[info->card])) {
- /* Let the transmit ISR take care of this (since it
- requires stuffing characters into the output stream).
- */
- if (break_state == -1) {
- if (!info->breakon) {
- info->breakon = 1;
- if (!info->xmit_cnt) {
- CY_UNLOCK(info, flags);
- start_xmit(info);
- CY_LOCK(info, flags);
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "cy_break"))
+ return;
+
+ CY_LOCK(info, flags);
+ if (!IS_CYC_Z(cy_card[info->card])) {
+ /* Let the transmit ISR take care of this (since it
+ requires stuffing characters into the output stream).
+ */
+ if (break_state == -1) {
+ if (!info->breakon) {
+ info->breakon = 1;
+ if (!info->xmit_cnt) {
+ CY_UNLOCK(info, flags);
+ start_xmit(info);
+ CY_LOCK(info, flags);
+ }
+ }
+ } else {
+ if (!info->breakoff) {
+ info->breakoff = 1;
+ if (!info->xmit_cnt) {
+ CY_UNLOCK(info, flags);
+ start_xmit(info);
+ CY_LOCK(info, flags);
+ }
+ }
}
- }
} else {
- if (!info->breakoff) {
- info->breakoff = 1;
- if (!info->xmit_cnt) {
- CY_UNLOCK(info, flags);
- start_xmit(info);
- CY_LOCK(info, flags);
+ int retval;
+
+ if (break_state == -1) {
+ retval = cyz_issue_cmd(&cy_card[info->card],
+ info->line - cy_card[info->card].first_line,
+ C_CM_SET_BREAK, 0L);
+ if (retval != 0) {
+ printk("cyc:cy_break (set) retval on ttyC%d "
+ "was %x\n", info->line, retval);
+ }
+ } else {
+ retval = cyz_issue_cmd(&cy_card[info->card],
+ info->line - cy_card[info->card].first_line,
+ C_CM_CLR_BREAK, 0L);
+ if (retval != 0) {
+ printk("cyc:cy_break (clr) retval on ttyC%d "
+ "was %x\n", info->line, retval);
+ }
}
- }
}
- } else {
- int retval;
-
- if (break_state == -1) {
- retval = cyz_issue_cmd(&cy_card[info->card],
- (info->line) - (cy_card[info->card].first_line),
- C_CM_SET_BREAK, 0L);
- if (retval != 0) {
- printk("cyc:cy_break (set) retval on ttyC%d was %x\n",
- info->line, retval);
- }
- } else {
- retval = cyz_issue_cmd(&cy_card[info->card],
- (info->line) - (cy_card[info->card].first_line),
- C_CM_CLR_BREAK, 0L);
- if (retval != 0) {
- printk("cyc:cy_break (clr) retval on ttyC%d was %x\n",
- info->line, retval);
- }
- }
- }
- CY_UNLOCK(info, flags);
-} /* cy_break */
+ CY_UNLOCK(info, flags);
+} /* cy_break */
static int
-get_mon_info(struct cyclades_port * info, struct cyclades_monitor __user * mon)
+get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon)
{
- if(copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
- return -EFAULT;
- info->mon.int_count = 0;
- info->mon.char_count = 0;
- info->mon.char_max = 0;
- info->mon.char_last = 0;
- return 0;
-}/* get_mon_info */
-
+ if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
+ return -EFAULT;
+ info->mon.int_count = 0;
+ info->mon.char_count = 0;
+ info->mon.char_max = 0;
+ info->mon.char_last = 0;
+ return 0;
+} /* get_mon_info */
-static int
-set_threshold(struct cyclades_port * info, unsigned long value)
+static int set_threshold(struct cyclades_port *info, unsigned long value)
{
- void __iomem *base_addr;
- int card,channel,chip,index;
- unsigned long flags;
-
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
-
- info->cor3 &= ~CyREC_FIFO;
- info->cor3 |= value & CyREC_FIFO;
+ void __iomem *base_addr;
+ int card, channel, chip, index;
+ unsigned long flags;
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCOR3<<index), info->cor3);
- cyy_issue_cmd(base_addr,CyCOR_CHANGE|CyCOR3ch,index);
- CY_UNLOCK(info, flags);
- } else {
- // Nothing to do!
- }
- return 0;
-}/* set_threshold */
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr =
+ cy_card[card].base_addr + (cy_chip_offset[chip] << index);
+ info->cor3 &= ~CyREC_FIFO;
+ info->cor3 |= value & CyREC_FIFO;
-static int
-get_threshold(struct cyclades_port * info, unsigned long __user *value)
-{
- void __iomem *base_addr;
- int card,channel,chip,index;
- unsigned long tmp;
-
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
-
- tmp = cy_readb(base_addr+(CyCOR3<<index)) & CyREC_FIFO;
- return put_user(tmp,value);
- } else {
- // Nothing to do!
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
+ cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index);
+ CY_UNLOCK(info, flags);
+ } else {
+ /* Nothing to do! */
+ }
return 0;
- }
-}/* get_threshold */
-
+} /* set_threshold */
static int
-set_default_threshold(struct cyclades_port * info, unsigned long value)
+get_threshold(struct cyclades_port *info, unsigned long __user * value)
{
- info->default_threshold = value & 0x0f;
- return 0;
-}/* set_default_threshold */
+ void __iomem *base_addr;
+ int card, channel, chip, index;
+ unsigned long tmp;
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr =
+ cy_card[card].base_addr + (cy_chip_offset[chip] << index);
+
+ tmp = cy_readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO;
+ return put_user(tmp, value);
+ } else {
+ /* Nothing to do! */
+ return 0;
+ }
+} /* get_threshold */
static int
-get_default_threshold(struct cyclades_port * info, unsigned long __user *value)
+set_default_threshold(struct cyclades_port *info, unsigned long value)
{
- return put_user(info->default_threshold,value);
-}/* get_default_threshold */
-
+ info->default_threshold = value & 0x0f;
+ return 0;
+} /* set_default_threshold */
static int
-set_timeout(struct cyclades_port * info, unsigned long value)
+get_default_threshold(struct cyclades_port *info, unsigned long __user * value)
{
- void __iomem *base_addr;
- int card,channel,chip,index;
- unsigned long flags;
-
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
+ return put_user(info->default_threshold, value);
+} /* get_default_threshold */
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyRTPR<<index), value & 0xff);
- CY_UNLOCK(info, flags);
- } else {
- // Nothing to do!
- }
- return 0;
-}/* set_timeout */
+static int set_timeout(struct cyclades_port *info, unsigned long value)
+{
+ void __iomem *base_addr;
+ int card, channel, chip, index;
+ unsigned long flags;
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr =
+ cy_card[card].base_addr + (cy_chip_offset[chip] << index);
-static int
-get_timeout(struct cyclades_port * info, unsigned long __user *value)
-{
- void __iomem *base_addr;
- int card,channel,chip,index;
- unsigned long tmp;
-
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
-
- tmp = cy_readb(base_addr+(CyRTPR<<index));
- return put_user(tmp,value);
- } else {
- // Nothing to do!
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyRTPR << index), value & 0xff);
+ CY_UNLOCK(info, flags);
+ } else {
+ /* Nothing to do! */
+ }
return 0;
- }
-}/* get_timeout */
+} /* set_timeout */
-
-static int
-set_default_timeout(struct cyclades_port * info, unsigned long value)
+static int get_timeout(struct cyclades_port *info, unsigned long __user * value)
{
- info->default_timeout = value & 0xff;
- return 0;
-}/* set_default_timeout */
+ void __iomem *base_addr;
+ int card, channel, chip, index;
+ unsigned long tmp;
+
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr =
+ cy_card[card].base_addr + (cy_chip_offset[chip] << index);
+
+ tmp = cy_readb(base_addr + (CyRTPR << index));
+ return put_user(tmp, value);
+ } else {
+ /* Nothing to do! */
+ return 0;
+ }
+} /* get_timeout */
+static int set_default_timeout(struct cyclades_port *info, unsigned long value)
+{
+ info->default_timeout = value & 0xff;
+ return 0;
+} /* set_default_timeout */
static int
-get_default_timeout(struct cyclades_port * info, unsigned long __user *value)
+get_default_timeout(struct cyclades_port *info, unsigned long __user * value)
{
- return put_user(info->default_timeout,value);
-}/* get_default_timeout */
+ return put_user(info->default_timeout, value);
+} /* get_default_timeout */
/*
* This routine allows the tty driver to implement device-
* not recognized by the driver, it should return ENOIOCTLCMD.
*/
static int
-cy_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
+cy_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
- struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
- struct cyclades_icount cprev, cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser; /* user space */
- int ret_val = 0;
- unsigned long flags;
- void __user *argp = (void __user *)arg;
-
- if (serial_paranoia_check(info, tty->name, "cy_ioctl"))
- return -ENODEV;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ struct cyclades_icount cprev, cnow; /* kernel counter temps */
+ struct serial_icounter_struct __user *p_cuser; /* user space */
+ int ret_val = 0;
+ unsigned long flags;
+ void __user *argp = (void __user *)arg;
+
+ if (serial_paranoia_check(info, tty->name, "cy_ioctl"))
+ return -ENODEV;
#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
- info->line, cmd, arg); /* */
+ printk("cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", info->line, cmd, arg); /* */
#endif
- switch (cmd) {
- case CYGETMON:
- ret_val = get_mon_info(info, argp);
- break;
- case CYGETTHRESH:
- ret_val = get_threshold(info, argp);
- break;
- case CYSETTHRESH:
- ret_val = set_threshold(info, arg);
- break;
- case CYGETDEFTHRESH:
- ret_val = get_default_threshold(info, argp);
- break;
- case CYSETDEFTHRESH:
- ret_val = set_default_threshold(info, arg);
- break;
- case CYGETTIMEOUT:
- ret_val = get_timeout(info, argp);
- break;
- case CYSETTIMEOUT:
- ret_val = set_timeout(info, arg);
- break;
- case CYGETDEFTIMEOUT:
- ret_val = get_default_timeout(info, argp);
- break;
- case CYSETDEFTIMEOUT:
- ret_val = set_default_timeout(info, arg);
- break;
+ switch (cmd) {
+ case CYGETMON:
+ ret_val = get_mon_info(info, argp);
+ break;
+ case CYGETTHRESH:
+ ret_val = get_threshold(info, argp);
+ break;
+ case CYSETTHRESH:
+ ret_val = set_threshold(info, arg);
+ break;
+ case CYGETDEFTHRESH:
+ ret_val = get_default_threshold(info, argp);
+ break;
+ case CYSETDEFTHRESH:
+ ret_val = set_default_threshold(info, arg);
+ break;
+ case CYGETTIMEOUT:
+ ret_val = get_timeout(info, argp);
+ break;
+ case CYSETTIMEOUT:
+ ret_val = set_timeout(info, arg);
+ break;
+ case CYGETDEFTIMEOUT:
+ ret_val = get_default_timeout(info, argp);
+ break;
+ case CYSETDEFTIMEOUT:
+ ret_val = set_default_timeout(info, arg);
+ break;
case CYSETRFLOW:
- info->rflow = (int)arg;
- ret_val = 0;
- break;
+ info->rflow = (int)arg;
+ ret_val = 0;
+ break;
case CYGETRFLOW:
- ret_val = info->rflow;
- break;
+ ret_val = info->rflow;
+ break;
case CYSETRTSDTR_INV:
- info->rtsdtr_inv = (int)arg;
- ret_val = 0;
- break;
+ info->rtsdtr_inv = (int)arg;
+ ret_val = 0;
+ break;
case CYGETRTSDTR_INV:
- ret_val = info->rtsdtr_inv;
- break;
+ ret_val = info->rtsdtr_inv;
+ break;
case CYGETCARDINFO:
- if (copy_to_user(argp, &cy_card[info->card],
- sizeof (struct cyclades_card))) {
- ret_val = -EFAULT;
+ if (copy_to_user(argp, &cy_card[info->card],
+ sizeof(struct cyclades_card))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ ret_val = 0;
break;
- }
- ret_val = 0;
- break;
case CYGETCD1400VER:
- ret_val = info->chip_rev;
- break;
+ ret_val = info->chip_rev;
+ break;
#ifndef CONFIG_CYZ_INTR
case CYZSETPOLLCYCLE:
- cyz_polling_cycle = (arg * HZ) / 1000;
- ret_val = 0;
- break;
+ cyz_polling_cycle = (arg * HZ) / 1000;
+ ret_val = 0;
+ break;
case CYZGETPOLLCYCLE:
- ret_val = (cyz_polling_cycle * 1000) / HZ;
- break;
-#endif /* CONFIG_CYZ_INTR */
+ ret_val = (cyz_polling_cycle * 1000) / HZ;
+ break;
+#endif /* CONFIG_CYZ_INTR */
case CYSETWAIT:
- info->closing_wait = (unsigned short)arg * HZ/100;
- ret_val = 0;
- break;
+ info->closing_wait = (unsigned short)arg *HZ / 100;
+ ret_val = 0;
+ break;
case CYGETWAIT:
- ret_val = info->closing_wait / (HZ/100);
- break;
- case TIOCGSERIAL:
- ret_val = get_serial_info(info, argp);
- break;
- case TIOCSSERIAL:
- ret_val = set_serial_info(info, argp);
- break;
- case TIOCSERGETLSR: /* Get line status register */
- ret_val = get_lsr_info(info, argp);
- break;
- /*
- * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
- * - mask passed in arg for lines of interest
- * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
- * Caller should use TIOCGICOUNT to see which one it was
- */
+ ret_val = info->closing_wait / (HZ / 100);
+ break;
+ case TIOCGSERIAL:
+ ret_val = get_serial_info(info, argp);
+ break;
+ case TIOCSSERIAL:
+ ret_val = set_serial_info(info, argp);
+ break;
+ case TIOCSERGETLSR: /* Get line status register */
+ ret_val = get_lsr_info(info, argp);
+ break;
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
case TIOCMIWAIT:
- CY_LOCK(info, flags);
- /* note the counters on entry */
- cprev = info->icount;
- CY_UNLOCK(info, flags);
- while (1) {
- interruptible_sleep_on(&info->delta_msr_wait);
- /* see if a signal did it */
- if (signal_pending(current)) {
- return -ERESTARTSYS;
- }
-
CY_LOCK(info, flags);
- cnow = info->icount; /* atomic copy */
+ /* note the counters on entry */
+ cprev = info->icount;
CY_UNLOCK(info, flags);
+ while (1) {
+ interruptible_sleep_on(&info->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current)) {
+ return -ERESTARTSYS;
+ }
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
- return -EIO; /* no change => error */
- }
- if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
- return 0;
- }
- cprev = cnow;
- }
- /* NOTREACHED */
+ CY_LOCK(info, flags);
+ cnow = info->icount; /* atomic copy */
+ CY_UNLOCK(info, flags);
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- * RI where only 0->1 is counted.
- */
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
+ return -EIO; /* no change => error */
+ }
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+ return 0;
+ }
+ cprev = cnow;
+ }
+ /* NOTREACHED */
+
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
case TIOCGICOUNT:
- CY_LOCK(info, flags);
- cnow = info->icount;
- CY_UNLOCK(info, flags);
- p_cuser = argp;
- ret_val = put_user(cnow.cts, &p_cuser->cts);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.dsr, &p_cuser->dsr);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.rng, &p_cuser->rng);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.dcd, &p_cuser->dcd);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.rx, &p_cuser->rx);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.tx, &p_cuser->tx);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.frame, &p_cuser->frame);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.overrun, &p_cuser->overrun);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.parity, &p_cuser->parity);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.brk, &p_cuser->brk);
- if (ret_val) return ret_val;
- ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
- if (ret_val) return ret_val;
- ret_val = 0;
- break;
- default:
- ret_val = -ENOIOCTLCMD;
- }
+ CY_LOCK(info, flags);
+ cnow = info->icount;
+ CY_UNLOCK(info, flags);
+ p_cuser = argp;
+ ret_val = put_user(cnow.cts, &p_cuser->cts);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.dsr, &p_cuser->dsr);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.rng, &p_cuser->rng);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.dcd, &p_cuser->dcd);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.rx, &p_cuser->rx);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.tx, &p_cuser->tx);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.frame, &p_cuser->frame);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.overrun, &p_cuser->overrun);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.parity, &p_cuser->parity);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.brk, &p_cuser->brk);
+ if (ret_val)
+ return ret_val;
+ ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
+ if (ret_val)
+ return ret_val;
+ ret_val = 0;
+ break;
+ default:
+ ret_val = -ENOIOCTLCMD;
+ }
#ifdef CY_DEBUG_OTHER
- printk(" cyc:cy_ioctl done\n");
+ printk(" cyc:cy_ioctl done\n");
#endif
- return ret_val;
-} /* cy_ioctl */
-
+ return ret_val;
+} /* cy_ioctl */
/*
* This routine allows the tty driver to be notified when
* well-designed tty driver should be prepared to accept the case
* where old == NULL, and try to do something rational.
*/
-static void
-cy_set_termios(struct tty_struct *tty, struct termios * old_termios)
+static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_set_termios ttyC%d\n", info->line);
+ printk("cyc:cy_set_termios ttyC%d\n", info->line);
#endif
- if ((tty->termios->c_cflag == old_termios->c_cflag) &&
- ((tty->termios->c_iflag & (IXON|IXANY)) ==
- (old_termios->c_iflag & (IXON|IXANY))))
- return;
- set_line_char(info);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- cy_start(tty);
- }
+ if (tty->termios->c_cflag == old_termios->c_cflag &&
+ (tty->termios->c_iflag & (IXON | IXANY)) ==
+ (old_termios->c_iflag & (IXON | IXANY)))
+ return;
+ set_line_char(info);
+
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ cy_start(tty);
+ }
#if 0
- /*
- * No need to wake up processes in open wait, since they
- * sample the CLOCAL flag once, and don't recheck it.
- * XXX It's not clear whether the current behavior is correct
- * or not. Hence, this may change.....
- */
- if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&info->open_wait);
+ /*
+ * No need to wake up processes in open wait, since they
+ * sample the CLOCAL flag once, and don't recheck it.
+ * XXX It's not clear whether the current behavior is correct
+ * or not. Hence, this may change.....
+ */
+ if (!(old_termios->c_cflag & CLOCAL) &&
+ (tty->termios->c_cflag & CLOCAL))
+ wake_up_interruptible(&info->open_wait);
#endif
-
- return;
-} /* cy_set_termios */
+} /* cy_set_termios */
/* This function is used to send a high-priority XON/XOFF character to
the device.
*/
-static void
-cy_send_xchar (struct tty_struct *tty, char ch)
+static void cy_send_xchar(struct tty_struct *tty, char ch)
{
- struct cyclades_port *info = (struct cyclades_port *) tty->driver_data;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
int card, channel;
- if (serial_paranoia_check (info, tty->name, "cy_send_xchar"))
+ if (serial_paranoia_check(info, tty->name, "cy_send_xchar"))
return;
- info->x_char = ch;
+ info->x_char = ch;
if (ch)
- cy_start (tty);
+ cy_start(tty);
card = info->card;
channel = info->line - cy_card[card].first_line;
- if (IS_CYC_Z (cy_card[card])) {
- if (ch == STOP_CHAR (tty))
- cyz_issue_cmd (&cy_card[card], channel, C_CM_SENDXOFF, 0L);
- else if (ch == START_CHAR (tty))
- cyz_issue_cmd (&cy_card[card], channel, C_CM_SENDXON, 0L);
+ if (IS_CYC_Z(cy_card[card])) {
+ if (ch == STOP_CHAR(tty))
+ cyz_issue_cmd(&cy_card[card], channel, C_CM_SENDXOFF,
+ 0L);
+ else if (ch == START_CHAR(tty))
+ cyz_issue_cmd(&cy_card[card], channel, C_CM_SENDXON,
+ 0L);
}
}
that incoming characters should be throttled because the input
buffers are close to full.
*/
-static void
-cy_throttle(struct tty_struct * tty)
+static void cy_throttle(struct tty_struct *tty)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- unsigned long flags;
- void __iomem *base_addr;
- int card,chip,channel,index;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ unsigned long flags;
+ void __iomem *base_addr;
+ int card, chip, channel, index;
#ifdef CY_DEBUG_THROTTLE
- char buf[64];
+ char buf[64];
- printk("cyc:throttle %s: %d....ttyC%d\n",
- tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty), info->line);
+ printk("cyc:throttle %s: %d....ttyC%d\n", tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty), info->line);
#endif
- if (serial_paranoia_check(info, tty->name, "cy_throttle")){
- return;
- }
-
- card = info->card;
-
- if (I_IXOFF(tty)) {
- if (!IS_CYC_Z (cy_card[card]))
- cy_send_xchar (tty, STOP_CHAR (tty));
- else
- info->throttle = 1;
- }
-
- if (tty->termios->c_cflag & CRTSCTS) {
- channel = info->line - cy_card[card].first_line;
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
-
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr+(CyMSVR2<<index), ~CyDTR);
- } else {
- cy_writeb(base_addr+(CyMSVR1<<index), ~CyRTS);
- }
- CY_UNLOCK(info, flags);
- } else {
- info->throttle = 1;
- }
- }
+ if (serial_paranoia_check(info, tty->name, "cy_throttle")) {
+ return;
+ }
+
+ card = info->card;
- return;
-} /* cy_throttle */
+ if (I_IXOFF(tty)) {
+ if (!IS_CYC_Z(cy_card[card]))
+ cy_send_xchar(tty, STOP_CHAR(tty));
+ else
+ info->throttle = 1;
+ }
+ if (tty->termios->c_cflag & CRTSCTS) {
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = cy_card[card].base_addr +
+ (cy_chip_offset[chip] << index);
+
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR2 << index),
+ ~CyDTR);
+ } else {
+ cy_writeb(base_addr + (CyMSVR1 << index),
+ ~CyRTS);
+ }
+ CY_UNLOCK(info, flags);
+ } else {
+ info->throttle = 1;
+ }
+ }
+} /* cy_throttle */
/*
* This routine notifies the tty driver that it should signal
* that characters can now be sent to the tty without fear of
* overrunning the input buffers of the line disciplines.
*/
-static void
-cy_unthrottle(struct tty_struct * tty)
+static void cy_unthrottle(struct tty_struct *tty)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- unsigned long flags;
- void __iomem *base_addr;
- int card,chip,channel,index;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ unsigned long flags;
+ void __iomem *base_addr;
+ int card, chip, channel, index;
#ifdef CY_DEBUG_THROTTLE
- char buf[64];
-
- printk("cyc:unthrottle %s: %d....ttyC%d\n",
- tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty), info->line);
-#endif
+ char buf[64];
- if (serial_paranoia_check(info, tty->name, "cy_unthrottle")){
- return;
- }
+ printk("cyc:unthrottle %s: %d....ttyC%d\n", tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty), info->line);
+#endif
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- cy_send_xchar (tty, START_CHAR (tty));
- }
-
- if (tty->termios->c_cflag & CRTSCTS) {
- card = info->card;
- channel = info->line - cy_card[card].first_line;
- if (!IS_CYC_Z(cy_card[card])) {
- chip = channel>>2;
- channel &= 0x03;
- index = cy_card[card].bus_index;
- base_addr = cy_card[card].base_addr + (cy_chip_offset[chip]<<index);
-
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index), (u_char)channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr+(CyMSVR2<<index), CyDTR);
- } else {
- cy_writeb(base_addr+(CyMSVR1<<index), CyRTS);
- }
- CY_UNLOCK(info, flags);
- } else {
- info->throttle = 0;
+ if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) {
+ return;
}
- }
- return;
-} /* cy_unthrottle */
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ cy_send_xchar(tty, START_CHAR(tty));
+ }
+ if (tty->termios->c_cflag & CRTSCTS) {
+ card = info->card;
+ channel = info->line - cy_card[card].first_line;
+ if (!IS_CYC_Z(cy_card[card])) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = cy_card[card].bus_index;
+ base_addr = cy_card[card].base_addr +
+ (cy_chip_offset[chip] << index);
+
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR2 << index),
+ CyDTR);
+ } else {
+ cy_writeb(base_addr + (CyMSVR1 << index),
+ CyRTS);
+ }
+ CY_UNLOCK(info, flags);
+ } else {
+ info->throttle = 0;
+ }
+ }
+} /* cy_unthrottle */
/* cy_start and cy_stop provide software output flow control as a
function of XON/XOFF, software CTS, and other such stuff.
*/
-static void
-cy_stop(struct tty_struct *tty)
+static void cy_stop(struct tty_struct *tty)
{
- struct cyclades_card *cinfo;
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- void __iomem *base_addr;
- int chip,channel,index;
- unsigned long flags;
+ struct cyclades_card *cinfo;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ void __iomem *base_addr;
+ int chip, channel, index;
+ unsigned long flags;
#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_stop ttyC%d\n", info->line); /* */
+ printk("cyc:cy_stop ttyC%d\n", info->line); /* */
#endif
- if (serial_paranoia_check(info, tty->name, "cy_stop"))
- return;
-
- cinfo = &cy_card[info->card];
- channel = info->line - cinfo->first_line;
- if (!IS_CYC_Z(*cinfo)) {
- index = cinfo->bus_index;
- chip = channel>>2;
- channel &= 0x03;
- base_addr = cy_card[info->card].base_addr + (cy_chip_offset[chip]<<index);
-
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index),
- (u_char)(channel & 0x0003)); /* index channel */
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) & ~CyTxRdy);
- CY_UNLOCK(info, flags);
- } else {
- // Nothing to do!
- }
+ if (serial_paranoia_check(info, tty->name, "cy_stop"))
+ return;
- return;
-} /* cy_stop */
+ cinfo = &cy_card[info->card];
+ channel = info->line - cinfo->first_line;
+ if (!IS_CYC_Z(*cinfo)) {
+ index = cinfo->bus_index;
+ chip = channel >> 2;
+ channel &= 0x03;
+ base_addr = cy_card[info->card].base_addr +
+ (cy_chip_offset[chip] << index);
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index),
+ (u_char)(channel & 0x0003)); /* index channel */
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+ CY_UNLOCK(info, flags);
+ } else {
+ /* Nothing to do! */
+ }
+} /* cy_stop */
-static void
-cy_start(struct tty_struct *tty)
+static void cy_start(struct tty_struct *tty)
{
- struct cyclades_card *cinfo;
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- void __iomem *base_addr;
- int chip,channel,index;
- unsigned long flags;
+ struct cyclades_card *cinfo;
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ void __iomem *base_addr;
+ int chip, channel, index;
+ unsigned long flags;
#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_start ttyC%d\n", info->line); /* */
+ printk("cyc:cy_start ttyC%d\n", info->line); /* */
#endif
- if (serial_paranoia_check(info, tty->name, "cy_start"))
- return;
-
- cinfo = &cy_card[info->card];
- channel = info->line - cinfo->first_line;
- index = cinfo->bus_index;
- if (!IS_CYC_Z(*cinfo)) {
- chip = channel>>2;
- channel &= 0x03;
- base_addr = cy_card[info->card].base_addr + (cy_chip_offset[chip]<<index);
-
- CY_LOCK(info, flags);
- cy_writeb(base_addr+(CyCAR<<index),
- (u_char)(channel & 0x0003)); /* index channel */
- cy_writeb(base_addr+(CySRER<<index),
- cy_readb(base_addr+(CySRER<<index)) | CyTxRdy);
- CY_UNLOCK(info, flags);
- } else {
- // Nothing to do!
- }
+ if (serial_paranoia_check(info, tty->name, "cy_start"))
+ return;
- return;
-} /* cy_start */
+ cinfo = &cy_card[info->card];
+ channel = info->line - cinfo->first_line;
+ index = cinfo->bus_index;
+ if (!IS_CYC_Z(*cinfo)) {
+ chip = channel >> 2;
+ channel &= 0x03;
+ base_addr = cy_card[info->card].base_addr +
+ (cy_chip_offset[chip] << index);
+ CY_LOCK(info, flags);
+ cy_writeb(base_addr + (CyCAR << index), (u_char) (channel & 0x0003)); /* index channel */
+ cy_writeb(base_addr + (CySRER << index),
+ cy_readb(base_addr + (CySRER << index)) | CyTxRdy);
+ CY_UNLOCK(info, flags);
+ } else {
+ /* Nothing to do! */
+ }
+} /* cy_start */
-static void
-cy_flush_buffer(struct tty_struct *tty)
+static void cy_flush_buffer(struct tty_struct *tty)
{
- struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
- int card, channel, retval;
- unsigned long flags;
-
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+ int card, channel, retval;
+ unsigned long flags;
+
#ifdef CY_DEBUG_IO
- printk("cyc:cy_flush_buffer ttyC%d\n", info->line); /* */
+ printk("cyc:cy_flush_buffer ttyC%d\n", info->line); /* */
#endif
- if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
- return;
-
- card = info->card;
- channel = (info->line) - (cy_card[card].first_line);
+ if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
+ return;
- CY_LOCK(info, flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- CY_UNLOCK(info, flags);
+ card = info->card;
+ channel = (info->line) - (cy_card[card].first_line);
- if (IS_CYC_Z(cy_card[card])) { /* If it is a Z card, flush the on-board
- buffers as well */
CY_LOCK(info, flags);
- retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_TX, 0L);
- if (retval != 0) {
- printk("cyc: flush_buffer retval on ttyC%d was %x\n",
- info->line, retval);
- }
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
CY_UNLOCK(info, flags);
- }
- tty_wakeup(tty);
- wake_up_interruptible(&tty->write_wait);
-} /* cy_flush_buffer */
+ if (IS_CYC_Z(cy_card[card])) { /* If it is a Z card, flush the on-board
+ buffers as well */
+ CY_LOCK(info, flags);
+ retval =
+ cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_TX, 0L);
+ if (retval != 0) {
+ printk("cyc: flush_buffer retval on ttyC%d was %x\n",
+ info->line, retval);
+ }
+ CY_UNLOCK(info, flags);
+ }
+ tty_wakeup(tty);
+ wake_up_interruptible(&tty->write_wait);
+} /* cy_flush_buffer */
/*
* cy_hangup() --- called by tty_hangup() when a hangup is signaled.
*/
-static void
-cy_hangup(struct tty_struct *tty)
+static void cy_hangup(struct tty_struct *tty)
{
- struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
-
+ struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
+
#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_hangup ttyC%d\n", info->line); /* */
+ printk("cyc:cy_hangup ttyC%d\n", info->line); /* */
#endif
- if (serial_paranoia_check(info, tty->name, "cy_hangup"))
- return;
+ if (serial_paranoia_check(info, tty->name, "cy_hangup"))
+ return;
- cy_flush_buffer(tty);
- shutdown(info);
- info->event = 0;
- info->count = 0;
+ cy_flush_buffer(tty);
+ shutdown(info);
+ info->event = 0;
+ info->count = 0;
#ifdef CY_DEBUG_COUNT
- printk("cyc:cy_hangup (%d): setting count to 0\n", current->pid);
+ printk("cyc:cy_hangup (%d): setting count to 0\n", current->pid);
#endif
- info->tty = NULL;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- wake_up_interruptible(&info->open_wait);
-} /* cy_hangup */
-
+ info->tty = NULL;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ wake_up_interruptible(&info->open_wait);
+} /* cy_hangup */
/*
* ---------------------------------------------------------------------
/* initialize chips on Cyclom-Y card -- return number of valid
chips (which is number of ports/4) */
static unsigned short __init
-cyy_init_card(void __iomem *true_base_addr,int index)
+cyy_init_card(void __iomem * true_base_addr, int index)
{
- unsigned int chip_number;
- void __iomem *base_addr;
-
- cy_writeb(true_base_addr+(Cy_HwReset<<index), 0);
- /* Cy_HwReset is 0x1400 */
- cy_writeb(true_base_addr+(Cy_ClrIntr<<index), 0);
- /* Cy_ClrIntr is 0x1800 */
- udelay(500L);
-
- for(chip_number=0; chip_number<CyMAX_CHIPS_PER_CARD; chip_number++){
- base_addr = true_base_addr + (cy_chip_offset[chip_number]<<index);
- mdelay(1);
- if(cy_readb(base_addr+(CyCCR<<index)) != 0x00){
- /*************
- printk(" chip #%d at %#6lx is never idle (CCR != 0)\n",
- chip_number, (unsigned long)base_addr);
- *************/
- return chip_number;
- }
-
- cy_writeb(base_addr+(CyGFRCR<<index), 0);
- udelay(10L);
-
- /* The Cyclom-16Y does not decode address bit 9 and therefore
- cannot distinguish between references to chip 0 and a non-
- existent chip 4. If the preceding clearing of the supposed
- chip 4 GFRCR register appears at chip 0, there is no chip 4
- and this must be a Cyclom-16Y, not a Cyclom-32Ye.
- */
- if (chip_number == 4
- && cy_readb(true_base_addr
- + (cy_chip_offset[0]<<index)
- + (CyGFRCR<<index)) == 0){
- return chip_number;
- }
-
- cy_writeb(base_addr+(CyCCR<<index), CyCHIP_RESET);
- mdelay(1);
-
- if(cy_readb(base_addr+(CyGFRCR<<index)) == 0x00){
- /*
- printk(" chip #%d at %#6lx is not responding ",
- chip_number, (unsigned long)base_addr);
- printk("(GFRCR stayed 0)\n",
- */
- return chip_number;
- }
- if((0xf0 & (cy_readb(base_addr+(CyGFRCR<<index)))) != 0x40){
- /*
- printk(" chip #%d at %#6lx is not valid (GFRCR == %#2x)\n",
- chip_number, (unsigned long)base_addr,
- base_addr[CyGFRCR<<index]);
- */
- return chip_number;
- }
- cy_writeb(base_addr+(CyGCR<<index), CyCH0_SERIAL);
- if (cy_readb(base_addr+(CyGFRCR<<index)) >= CD1400_REV_J){
- /* It is a CD1400 rev. J or later */
- /* Impossible to reach 5ms with this chip.
- Changed to 2ms instead (f = 500 Hz). */
- cy_writeb(base_addr+(CyPPR<<index), CyCLOCK_60_2MS);
- } else {
- /* f = 200 Hz */
- cy_writeb(base_addr+(CyPPR<<index), CyCLOCK_25_5MS);
- }
+ unsigned int chip_number;
+ void __iomem *base_addr;
+
+ cy_writeb(true_base_addr + (Cy_HwReset << index), 0);
+ /* Cy_HwReset is 0x1400 */
+ cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0);
+ /* Cy_ClrIntr is 0x1800 */
+ udelay(500L);
+
+ for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD; chip_number++) {
+ base_addr =
+ true_base_addr + (cy_chip_offset[chip_number] << index);
+ mdelay(1);
+ if (cy_readb(base_addr + (CyCCR << index)) != 0x00) {
+ /*************
+ printk(" chip #%d at %#6lx is never idle (CCR != 0)\n",
+ chip_number, (unsigned long)base_addr);
+ *************/
+ return chip_number;
+ }
+
+ cy_writeb(base_addr + (CyGFRCR << index), 0);
+ udelay(10L);
+
+ /* The Cyclom-16Y does not decode address bit 9 and therefore
+ cannot distinguish between references to chip 0 and a non-
+ existent chip 4. If the preceding clearing of the supposed
+ chip 4 GFRCR register appears at chip 0, there is no chip 4
+ and this must be a Cyclom-16Y, not a Cyclom-32Ye.
+ */
+ if (chip_number == 4 && cy_readb(true_base_addr +
+ (cy_chip_offset[0] << index) +
+ (CyGFRCR << index)) == 0) {
+ return chip_number;
+ }
+
+ cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET);
+ mdelay(1);
+
+ if (cy_readb(base_addr + (CyGFRCR << index)) == 0x00) {
+ /*
+ printk(" chip #%d at %#6lx is not responding ",
+ chip_number, (unsigned long)base_addr);
+ printk("(GFRCR stayed 0)\n",
+ */
+ return chip_number;
+ }
+ if ((0xf0 & (cy_readb(base_addr + (CyGFRCR << index)))) !=
+ 0x40) {
+ /*
+ printk(" chip #%d at %#6lx is not valid (GFRCR == "
+ "%#2x)\n",
+ chip_number, (unsigned long)base_addr,
+ base_addr[CyGFRCR<<index]);
+ */
+ return chip_number;
+ }
+ cy_writeb(base_addr + (CyGCR << index), CyCH0_SERIAL);
+ if (cy_readb(base_addr + (CyGFRCR << index)) >= CD1400_REV_J) {
+ /* It is a CD1400 rev. J or later */
+ /* Impossible to reach 5ms with this chip.
+ Changed to 2ms instead (f = 500 Hz). */
+ cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS);
+ } else {
+ /* f = 200 Hz */
+ cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS);
+ }
- /*
- printk(" chip #%d at %#6lx is rev 0x%2x\n",
- chip_number, (unsigned long)base_addr,
- cy_readb(base_addr+(CyGFRCR<<index)));
- */
- }
- return chip_number;
-} /* cyy_init_card */
+ /*
+ printk(" chip #%d at %#6lx is rev 0x%2x\n",
+ chip_number, (unsigned long)base_addr,
+ cy_readb(base_addr+(CyGFRCR<<index)));
+ */
+ }
+ return chip_number;
+} /* cyy_init_card */
/*
* ---------------------------------------------------------------------
* sets global variables and return the number of ISA boards found.
* ---------------------------------------------------------------------
*/
-static int __init
-cy_detect_isa(void)
+static int __init cy_detect_isa(void)
{
#ifdef CONFIG_ISA
- unsigned short cy_isa_irq,nboard;
- void __iomem *cy_isa_address;
- unsigned short i,j,cy_isa_nchan;
+ unsigned short cy_isa_irq, nboard;
+ void __iomem *cy_isa_address;
+ unsigned short i, j, cy_isa_nchan;
#ifdef MODULE
- int isparam = 0;
+ int isparam = 0;
#endif
- nboard = 0;
+ nboard = 0;
#ifdef MODULE
/* Check for module parameters */
- for(i = 0 ; i < NR_CARDS; i++) {
- if (maddr[i] || i) {
- isparam = 1;
- cy_isa_addresses[i] = maddr[i];
- }
- if (!maddr[i])
- break;
+ for (i = 0; i < NR_CARDS; i++) {
+ if (maddr[i] || i) {
+ isparam = 1;
+ cy_isa_addresses[i] = maddr[i];
+ }
+ if (!maddr[i])
+ break;
}
#endif
- /* scan the address table probing for Cyclom-Y/ISA boards */
- for (i = 0 ; i < NR_ISA_ADDRS ; i++) {
- unsigned int isa_address = cy_isa_addresses[i];
- if (isa_address == 0x0000) {
- return(nboard);
- }
+ /* scan the address table probing for Cyclom-Y/ISA boards */
+ for (i = 0; i < NR_ISA_ADDRS; i++) {
+ unsigned int isa_address = cy_isa_addresses[i];
+ if (isa_address == 0x0000) {
+ return nboard;
+ }
- /* probe for CD1400... */
+ /* probe for CD1400... */
cy_isa_address = ioremap(isa_address, CyISA_Ywin);
- cy_isa_nchan = CyPORTS_PER_CHIP *
- cyy_init_card(cy_isa_address,0);
- if (cy_isa_nchan == 0) {
- continue;
- }
-
+ cy_isa_nchan = CyPORTS_PER_CHIP *
+ cyy_init_card(cy_isa_address, 0);
+ if (cy_isa_nchan == 0) {
+ continue;
+ }
#ifdef MODULE
if (isparam && irq[i])
- cy_isa_irq = irq[i];
+ cy_isa_irq = irq[i];
else
#endif
- /* find out the board's irq by probing */
- cy_isa_irq = detect_isa_irq(cy_isa_address);
- if (cy_isa_irq == 0) {
- printk("Cyclom-Y/ISA found at 0x%lx ",
- (unsigned long) cy_isa_address);
- printk("but the IRQ could not be detected.\n");
- continue;
- }
-
- if((cy_next_channel+cy_isa_nchan) > NR_PORTS) {
- printk("Cyclom-Y/ISA found at 0x%lx ",
- (unsigned long) cy_isa_address);
- printk("but no more channels are available.\n");
- printk("Change NR_PORTS in cyclades.c and recompile kernel.\n");
- return(nboard);
- }
- /* fill the next cy_card structure available */
- for (j = 0 ; j < NR_CARDS ; j++) {
- if (cy_card[j].base_addr == 0) break;
- }
- if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclom-Y/ISA found at 0x%lx ",
- (unsigned long) cy_isa_address);
- printk("but no more cards can be used .\n");
- printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
- return(nboard);
- }
-
- /* allocate IRQ */
- if(request_irq(cy_isa_irq, cyy_interrupt,
- IRQF_DISABLED, "Cyclom-Y", &cy_card[j]))
- {
- printk("Cyclom-Y/ISA found at 0x%lx ",
- (unsigned long) cy_isa_address);
- printk("but could not allocate IRQ#%d.\n",
- cy_isa_irq);
- return(nboard);
- }
-
- /* set cy_card */
- cy_card[j].base_addr = cy_isa_address;
- cy_card[j].ctl_addr = NULL;
- cy_card[j].irq = (int) cy_isa_irq;
- cy_card[j].bus_index = 0;
- cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = cy_isa_nchan/4;
- nboard++;
-
- /* print message */
- printk("Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d, ",
- j+1, (unsigned long) cy_isa_address,
- (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
- cy_isa_irq);
- printk("%d channels starting from port %d.\n",
- cy_isa_nchan, cy_next_channel);
- cy_next_channel += cy_isa_nchan;
- }
- return(nboard);
+ /* find out the board's irq by probing */
+ cy_isa_irq = detect_isa_irq(cy_isa_address);
+ if (cy_isa_irq == 0) {
+ printk("Cyclom-Y/ISA found at 0x%lx ",
+ (unsigned long)cy_isa_address);
+ printk("but the IRQ could not be detected.\n");
+ continue;
+ }
+
+ if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) {
+ printk("Cyclom-Y/ISA found at 0x%lx ",
+ (unsigned long)cy_isa_address);
+ printk("but no more channels are available.\n");
+ printk("Change NR_PORTS in cyclades.c and recompile "
+ "kernel.\n");
+ return nboard;
+ }
+ /* fill the next cy_card structure available */
+ for (j = 0; j < NR_CARDS; j++) {
+ if (cy_card[j].base_addr == 0)
+ break;
+ }
+ if (j == NR_CARDS) { /* no more cy_cards available */
+ printk("Cyclom-Y/ISA found at 0x%lx ",
+ (unsigned long)cy_isa_address);
+ printk("but no more cards can be used .\n");
+ printk("Change NR_CARDS in cyclades.c and recompile "
+ "kernel.\n");
+ return nboard;
+ }
+
+ /* allocate IRQ */
+ if (request_irq(cy_isa_irq, cyy_interrupt,
+ IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) {
+ printk("Cyclom-Y/ISA found at 0x%lx ",
+ (unsigned long)cy_isa_address);
+ printk("but could not allocate IRQ#%d.\n", cy_isa_irq);
+ return nboard;
+ }
+
+ /* set cy_card */
+ cy_card[j].base_addr = cy_isa_address;
+ cy_card[j].ctl_addr = NULL;
+ cy_card[j].irq = (int)cy_isa_irq;
+ cy_card[j].bus_index = 0;
+ cy_card[j].first_line = cy_next_channel;
+ cy_card[j].num_chips = cy_isa_nchan / 4;
+ nboard++;
+
+ /* print message */
+ printk("Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d, ",
+ j + 1, (unsigned long)cy_isa_address,
+ (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
+ cy_isa_irq);
+ printk("%d channels starting from port %d.\n",
+ cy_isa_nchan, cy_next_channel);
+ cy_next_channel += cy_isa_nchan;
+ }
+ return nboard;
#else
- return(0);
-#endif /* CONFIG_ISA */
-} /* cy_detect_isa */
+ return 0;
+#endif /* CONFIG_ISA */
+} /* cy_detect_isa */
-static void
-plx_init(void __iomem *addr, uclong initctl)
+static void plx_init(void __iomem * addr, uclong initctl)
{
- /* Reset PLX */
- cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x40000000);
- udelay(100L);
- cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x40000000);
-
- /* Reload Config. Registers from EEPROM */
- cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x20000000);
- udelay(100L);
- cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x20000000);
+ /* Reset PLX */
+ cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x40000000);
+ udelay(100L);
+ cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x40000000);
+
+ /* Reload Config. Registers from EEPROM */
+ cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x20000000);
+ udelay(100L);
+ cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x20000000);
}
/*
* sets global variables and return the number of PCI boards found.
* ---------------------------------------------------------------------
*/
-static int __init
-cy_detect_pci(void)
+static int __init cy_detect_pci(void)
{
#ifdef CONFIG_PCI
- struct pci_dev *pdev = NULL;
- unsigned char cyy_rev_id;
- unsigned char cy_pci_irq = 0;
- uclong cy_pci_phys0, cy_pci_phys2;
- void __iomem *cy_pci_addr0, *cy_pci_addr2;
- unsigned short i,j,cy_pci_nchan, plx_ver;
- unsigned short device_id,dev_index = 0;
- uclong mailbox;
- uclong ZeIndex = 0;
- void __iomem *Ze_addr0[NR_CARDS], *Ze_addr2[NR_CARDS];
- uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS];
- unsigned char Ze_irq[NR_CARDS];
- struct pci_dev *Ze_pdev[NR_CARDS];
-
- for (i = 0; i < NR_CARDS; i++) {
- /* look for a Cyclades card by vendor and device id */
- while((device_id = cy_pci_dev_id[dev_index]) != 0) {
- if((pdev = pci_get_device(PCI_VENDOR_ID_CYCLADES,
- device_id, pdev)) == NULL) {
- dev_index++; /* try next device id */
- } else {
- break; /* found a board */
- }
- }
+ struct pci_dev *pdev = NULL;
+ unsigned char cyy_rev_id;
+ unsigned char cy_pci_irq = 0;
+ uclong cy_pci_phys0, cy_pci_phys2;
+ void __iomem *cy_pci_addr0, *cy_pci_addr2;
+ unsigned short i, j, cy_pci_nchan, plx_ver;
+ unsigned short device_id, dev_index = 0;
+ uclong mailbox;
+ uclong ZeIndex = 0;
+ void __iomem *Ze_addr0[NR_CARDS], *Ze_addr2[NR_CARDS];
+ uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS];
+ unsigned char Ze_irq[NR_CARDS];
+ struct pci_dev *Ze_pdev[NR_CARDS];
+
+ for (i = 0; i < NR_CARDS; i++) {
+ /* look for a Cyclades card by vendor and device id */
+ while ((device_id = cy_pci_dev_id[dev_index]) != 0) {
+ if ((pdev = pci_get_device(PCI_VENDOR_ID_CYCLADES,
+ device_id, pdev)) == NULL) {
+ dev_index++; /* try next device id */
+ } else {
+ break; /* found a board */
+ }
+ }
if (device_id == 0)
- break;
+ break;
if (pci_enable_device(pdev))
- continue;
+ continue;
- /* read PCI configuration area */
+ /* read PCI configuration area */
cy_pci_irq = pdev->irq;
cy_pci_phys0 = pci_resource_start(pdev, 0);
cy_pci_phys2 = pci_resource_start(pdev, 2);
device_id &= ~PCI_DEVICE_ID_MASK;
- if ((device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo)
- || (device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi)){
+ if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
+ device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
#ifdef CY_PCI_DEBUG
- printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ",
- pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n",
- cyy_rev_id, (int)cy_pci_irq);
- printk("Cyclom-Y/PCI:found winaddr=0x%lx ctladdr=0x%lx\n",
- (ulong)cy_pci_phys2, (ulong)cy_pci_phys0);
+ printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ",
+ pdev->bus->number, pdev->devfn);
+ printk("rev_id=%d) IRQ%d\n",
+ cyy_rev_id, (int)cy_pci_irq);
+ printk("Cyclom-Y/PCI:found winaddr=0x%lx "
+ "ctladdr=0x%lx\n",
+ (ulong)cy_pci_phys2, (ulong)cy_pci_phys0);
#endif
- if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
- printk(" Warning: PCI I/O bit incorrectly set. "
- "Ignoring it...\n");
- pdev->resource[2].flags &= ~IORESOURCE_IO;
- }
-
- /* Although we don't use this I/O region, we should
- request it from the kernel anyway, to avoid problems
- with other drivers accessing it. */
- if (pci_request_regions(pdev, "Cyclom-Y") != 0) {
- printk(KERN_ERR "cyclades: failed to reserve PCI resources\n");
- continue;
- }
+ if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
+ printk(" Warning: PCI I/O bit incorrectly "
+ "set. Ignoring it...\n");
+ pdev->resource[2].flags &= ~IORESOURCE_IO;
+ }
+ /* Although we don't use this I/O region, we should
+ request it from the kernel anyway, to avoid problems
+ with other drivers accessing it. */
+ if (pci_request_regions(pdev, "Cyclom-Y") != 0) {
+ printk(KERN_ERR "cyclades: failed to reserve "
+ "PCI resources\n");
+ continue;
+ }
#if defined(__alpha__)
- if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */
- printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ",
- pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n",
- cyy_rev_id, (int)cy_pci_irq);
- printk("Cyclom-Y/PCI:found winaddr=0x%lx ctladdr=0x%lx\n",
- (ulong)cy_pci_phys2, (ulong)cy_pci_phys0);
- printk("Cyclom-Y/PCI not supported for low addresses in "
- "Alpha systems.\n");
- i--;
- continue;
- }
+ if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */
+ printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ",
+ pdev->bus->number, pdev->devfn);
+ printk("rev_id=%d) IRQ%d\n",
+ cyy_rev_id, (int)cy_pci_irq);
+ printk("Cyclom-Y/PCI:found winaddr=0x%lx "
+ "ctladdr=0x%lx\n",
+ (ulong)cy_pci_phys2,
+ (ulong)cy_pci_phys0);
+ printk("Cyclom-Y/PCI not supported for low "
+ "addresses in Alpha systems.\n");
+ i--;
+ continue;
+ }
#endif
- cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Yctl);
- cy_pci_addr2 = ioremap(cy_pci_phys2, CyPCI_Ywin);
+ cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Yctl);
+ cy_pci_addr2 = ioremap(cy_pci_phys2, CyPCI_Ywin);
#ifdef CY_PCI_DEBUG
- printk("Cyclom-Y/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n",
- (u_long)cy_pci_addr2, (u_long)cy_pci_addr0);
+ printk("Cyclom-Y/PCI: relocate winaddr=0x%lx "
+ "ctladdr=0x%lx\n",
+ (u_long)cy_pci_addr2, (u_long)cy_pci_addr0);
#endif
- cy_pci_nchan = (unsigned short)(CyPORTS_PER_CHIP *
- cyy_init_card(cy_pci_addr2, 1));
- if(cy_pci_nchan == 0) {
- printk("Cyclom-Y PCI host card with ");
- printk("no Serial-Modules at 0x%lx.\n",
- (ulong) cy_pci_phys2);
- i--;
- continue;
- }
- if((cy_next_channel+cy_pci_nchan) > NR_PORTS) {
- printk("Cyclom-Y/PCI found at 0x%lx ",
- (ulong) cy_pci_phys2);
- printk("but no channels are available.\n");
- printk("Change NR_PORTS in cyclades.c and recompile kernel.\n");
- return(i);
- }
- /* fill the next cy_card structure available */
- for (j = 0 ; j < NR_CARDS ; j++) {
- if (cy_card[j].base_addr == 0) break;
- }
- if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclom-Y/PCI found at 0x%lx ",
- (ulong) cy_pci_phys2);
- printk("but no more cards can be used.\n");
- printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
- return(i);
- }
-
- /* allocate IRQ */
- if(request_irq(cy_pci_irq, cyy_interrupt,
- IRQF_SHARED, "Cyclom-Y", &cy_card[j]))
- {
- printk("Cyclom-Y/PCI found at 0x%lx ",
- (ulong) cy_pci_phys2);
- printk("but could not allocate IRQ%d.\n",
- cy_pci_irq);
- return(i);
- }
-
- /* set cy_card */
- cy_card[j].base_phys = (ulong)cy_pci_phys2;
- cy_card[j].ctl_phys = (ulong)cy_pci_phys0;
- cy_card[j].base_addr = cy_pci_addr2;
- cy_card[j].ctl_addr = cy_pci_addr0;
- cy_card[j].irq = (int) cy_pci_irq;
- cy_card[j].bus_index = 1;
- cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = cy_pci_nchan/4;
- cy_card[j].pdev = pdev;
-
- /* enable interrupts in the PCI interface */
- plx_ver = cy_readb(cy_pci_addr2 + CyPLX_VER) & 0x0f;
- switch (plx_ver) {
- case PLX_9050:
-
- cy_writeb(cy_pci_addr0+0x4c, 0x43);
- break;
-
- case PLX_9060:
- case PLX_9080:
- default: /* Old boards, use PLX_9060 */
-
- plx_init(cy_pci_addr0, 0x6c);
- /* For some yet unknown reason, once the PLX9060 reloads
- the EEPROM, the IRQ is lost and, thus, we have to
- re-write it to the PCI config. registers.
- This will remain here until we find a permanent fix. */
- pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, cy_pci_irq);
-
- cy_writew(cy_pci_addr0+0x68,
- cy_readw(cy_pci_addr0+0x68)|0x0900);
- break;
- }
+ cy_pci_nchan = (unsigned short)(CyPORTS_PER_CHIP *
+ cyy_init_card(cy_pci_addr2, 1));
+ if (cy_pci_nchan == 0) {
+ printk("Cyclom-Y PCI host card with ");
+ printk("no Serial-Modules at 0x%lx.\n",
+ (ulong) cy_pci_phys2);
+ i--;
+ continue;
+ }
+ if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) {
+ printk("Cyclom-Y/PCI found at 0x%lx ",
+ (ulong) cy_pci_phys2);
+ printk("but no channels are available.\n");
+ printk("Change NR_PORTS in cyclades.c and "
+ "recompile kernel.\n");
+ return i;
+ }
+ /* fill the next cy_card structure available */
+ for (j = 0; j < NR_CARDS; j++) {
+ if (cy_card[j].base_addr == 0)
+ break;
+ }
+ if (j == NR_CARDS) { /* no more cy_cards available */
+ printk("Cyclom-Y/PCI found at 0x%lx ",
+ (ulong) cy_pci_phys2);
+ printk("but no more cards can be used.\n");
+ printk("Change NR_CARDS in cyclades.c and "
+ "recompile kernel.\n");
+ return i;
+ }
- /* print message */
- printk("Cyclom-Y/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
- j+1,
- (ulong)cy_pci_phys2,
- (ulong)(cy_pci_phys2 + CyPCI_Ywin - 1),
- (int)cy_pci_irq);
- printk("%d channels starting from port %d.\n",
- cy_pci_nchan, cy_next_channel);
-
- cy_next_channel += cy_pci_nchan;
- }else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo){
- /* print message */
- printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ",
- pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n",
- cyy_rev_id, (int)cy_pci_irq);
- printk("Cyclades-Z/PCI: found winaddr=0x%lx ctladdr=0x%lx\n",
- (ulong)cy_pci_phys2, (ulong)cy_pci_phys0);
- printk("Cyclades-Z/PCI not supported for low addresses\n");
- break;
- }else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi){
+ /* allocate IRQ */
+ if (request_irq(cy_pci_irq, cyy_interrupt,
+ IRQF_SHARED, "Cyclom-Y", &cy_card[j])) {
+ printk("Cyclom-Y/PCI found at 0x%lx ",
+ (ulong) cy_pci_phys2);
+ printk("but could not allocate IRQ%d.\n",
+ cy_pci_irq);
+ return i;
+ }
+
+ /* set cy_card */
+ cy_card[j].base_phys = (ulong) cy_pci_phys2;
+ cy_card[j].ctl_phys = (ulong) cy_pci_phys0;
+ cy_card[j].base_addr = cy_pci_addr2;
+ cy_card[j].ctl_addr = cy_pci_addr0;
+ cy_card[j].irq = (int)cy_pci_irq;
+ cy_card[j].bus_index = 1;
+ cy_card[j].first_line = cy_next_channel;
+ cy_card[j].num_chips = cy_pci_nchan / 4;
+ cy_card[j].pdev = pdev;
+
+ /* enable interrupts in the PCI interface */
+ plx_ver = cy_readb(cy_pci_addr2 + CyPLX_VER) & 0x0f;
+ switch (plx_ver) {
+ case PLX_9050:
+
+ cy_writeb(cy_pci_addr0 + 0x4c, 0x43);
+ break;
+
+ case PLX_9060:
+ case PLX_9080:
+ default: /* Old boards, use PLX_9060 */
+
+ plx_init(cy_pci_addr0, 0x6c);
+ /* For some yet unknown reason, once the PLX9060 reloads
+ the EEPROM, the IRQ is lost and, thus, we have to
+ re-write it to the PCI config. registers.
+ This will remain here until we find a permanent
+ fix. */
+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE,
+ cy_pci_irq);
+
+ cy_writew(cy_pci_addr0 + 0x68,
+ cy_readw(cy_pci_addr0 +
+ 0x68) | 0x0900);
+ break;
+ }
+
+ /* print message */
+ printk("Cyclom-Y/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
+ j + 1, (ulong)cy_pci_phys2,
+ (ulong) (cy_pci_phys2 + CyPCI_Ywin - 1),
+ (int)cy_pci_irq);
+ printk("%d channels starting from port %d.\n",
+ cy_pci_nchan, cy_next_channel);
+
+ cy_next_channel += cy_pci_nchan;
+ } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) {
+ /* print message */
+ printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ",
+ pdev->bus->number, pdev->devfn);
+ printk("rev_id=%d) IRQ%d\n",
+ cyy_rev_id, (int)cy_pci_irq);
+ printk("Cyclades-Z/PCI: found winaddr=0x%lx "
+ "ctladdr=0x%lx\n",
+ (ulong)cy_pci_phys2, (ulong)cy_pci_phys0);
+ printk("Cyclades-Z/PCI not supported for low "
+ "addresses\n");
+ break;
+ } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) {
#ifdef CY_PCI_DEBUG
- printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ",
- pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n",
- cyy_rev_id, (int)cy_pci_irq);
- printk("Cyclades-Z/PCI: found winaddr=0x%lx ctladdr=0x%lx\n",
- (ulong)cy_pci_phys2, (ulong)cy_pci_phys0);
+ printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ",
+ pdev->bus->number, pdev->devfn);
+ printk("rev_id=%d) IRQ%d\n",
+ cyy_rev_id, (int)cy_pci_irq);
+ printk("Cyclades-Z/PCI: found winaddr=0x%lx "
+ "ctladdr=0x%lx\n",
+ (ulong) cy_pci_phys2, (ulong) cy_pci_phys0);
#endif
- cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Zctl);
-
- /* Disable interrupts on the PLX before resetting it */
- cy_writew(cy_pci_addr0+0x68,
- cy_readw(cy_pci_addr0+0x68) & ~0x0900);
-
- plx_init(cy_pci_addr0, 0x6c);
- /* For some yet unknown reason, once the PLX9060 reloads
- the EEPROM, the IRQ is lost and, thus, we have to
- re-write it to the PCI config. registers.
- This will remain here until we find a permanent fix. */
- pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, cy_pci_irq);
-
- mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *)
- cy_pci_addr0)->mail_box_0);
-
- if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
- printk(" Warning: PCI I/O bit incorrectly set. "
- "Ignoring it...\n");
- pdev->resource[2].flags &= ~IORESOURCE_IO;
- }
+ cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Zctl);
+
+ /* Disable interrupts on the PLX before resetting it */
+ cy_writew(cy_pci_addr0 + 0x68,
+ cy_readw(cy_pci_addr0 + 0x68) & ~0x0900);
+
+ plx_init(cy_pci_addr0, 0x6c);
+ /* For some yet unknown reason, once the PLX9060 reloads
+ the EEPROM, the IRQ is lost and, thus, we have to
+ re-write it to the PCI config. registers.
+ This will remain here until we find a permanent
+ fix. */
+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE,
+ cy_pci_irq);
+
+ mailbox =
+ (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *)
+ cy_pci_addr0)->mail_box_0);
+
+ if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
+ printk(" Warning: PCI I/O bit incorrectly "
+ "set. Ignoring it...\n");
+ pdev->resource[2].flags &= ~IORESOURCE_IO;
+ }
- /* Although we don't use this I/O region, we should
- request it from the kernel anyway, to avoid problems
- with other drivers accessing it. */
- if (pci_request_regions(pdev, "Cyclades-Z") != 0) {
- printk(KERN_ERR "cyclades: failed to reserve PCI resources\n");
- continue;
- }
-
- if (mailbox == ZE_V1) {
- cy_pci_addr2 = ioremap(cy_pci_phys2, CyPCI_Ze_win);
- if (ZeIndex == NR_CARDS) {
- printk("Cyclades-Ze/PCI found at 0x%lx ",
- (ulong)cy_pci_phys2);
- printk("but no more cards can be used.\n");
- printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
- } else {
- Ze_phys0[ZeIndex] = cy_pci_phys0;
- Ze_phys2[ZeIndex] = cy_pci_phys2;
- Ze_addr0[ZeIndex] = cy_pci_addr0;
- Ze_addr2[ZeIndex] = cy_pci_addr2;
- Ze_irq[ZeIndex] = cy_pci_irq;
- Ze_pdev[ZeIndex] = pdev;
- ZeIndex++;
- }
- i--;
- continue;
- } else {
- cy_pci_addr2 = ioremap(cy_pci_phys2, CyPCI_Zwin);
- }
+ /* Although we don't use this I/O region, we should
+ request it from the kernel anyway, to avoid problems
+ with other drivers accessing it. */
+ if (pci_request_regions(pdev, "Cyclades-Z") != 0) {
+ printk(KERN_ERR "cyclades: failed to reserve "
+ "PCI resources\n");
+ continue;
+ }
+
+ if (mailbox == ZE_V1) {
+ cy_pci_addr2 = ioremap(cy_pci_phys2,
+ CyPCI_Ze_win);
+ if (ZeIndex == NR_CARDS) {
+ printk("Cyclades-Ze/PCI found at "
+ "0x%lx but no more cards can "
+ "be used.\nChange NR_CARDS in "
+ "cyclades.c and recompile "
+ "kernel.\n",
+ (ulong)cy_pci_phys2);
+ } else {
+ Ze_phys0[ZeIndex] = cy_pci_phys0;
+ Ze_phys2[ZeIndex] = cy_pci_phys2;
+ Ze_addr0[ZeIndex] = cy_pci_addr0;
+ Ze_addr2[ZeIndex] = cy_pci_addr2;
+ Ze_irq[ZeIndex] = cy_pci_irq;
+ Ze_pdev[ZeIndex] = pdev;
+ ZeIndex++;
+ }
+ i--;
+ continue;
+ } else {
+ cy_pci_addr2 = ioremap(cy_pci_phys2,CyPCI_Zwin);
+ }
#ifdef CY_PCI_DEBUG
- printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n",
- (ulong)cy_pci_addr2, (ulong)cy_pci_addr0);
- if (mailbox == ZO_V1) {
- cy_writel(&((struct RUNTIME_9060 *)
- (cy_pci_addr0))->loc_addr_base, WIN_CREG);
- PAUSE
- printk("Cyclades-8Zo/PCI: FPGA id %lx, ver %lx\n",
- (ulong)(0xff & cy_readl(&((struct CUSTOM_REG *)
- (cy_pci_addr2))->fpga_id)),
- (ulong)(0xff & cy_readl(&((struct CUSTOM_REG *)
- (cy_pci_addr2))->fpga_version)));
- cy_writel(&((struct RUNTIME_9060 *)
- (cy_pci_addr0))->loc_addr_base, WIN_RAM);
- } else {
- printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not loaded\n");
- }
+ printk("Cyclades-Z/PCI: relocate winaddr=0x%lx "
+ "ctladdr=0x%lx\n",
+ (ulong) cy_pci_addr2, (ulong) cy_pci_addr0);
+ if (mailbox == ZO_V1) {
+ cy_writel(&((struct RUNTIME_9060 *)
+ (cy_pci_addr0))->loc_addr_base,
+ WIN_CREG);
+ PAUSE;
+ printk("Cyclades-8Zo/PCI: FPGA id %lx, ver "
+ "%lx\n", (ulong) (0xff &
+ cy_readl(&((struct CUSTOM_REG *)
+ (cy_pci_addr2))->fpga_id)),
+ (ulong)(0xff &
+ cy_readl(&((struct CUSTOM_REG *)
+ (cy_pci_addr2))->
+ fpga_version)));
+ cy_writel(&((struct RUNTIME_9060 *)
+ (cy_pci_addr0))->loc_addr_base,
+ WIN_RAM);
+ } else {
+ printk("Cyclades-Z/PCI: New Cyclades-Z board. "
+ "FPGA not loaded\n");
+ }
#endif
- /* The following clears the firmware id word. This ensures
- that the driver will not attempt to talk to the board
- until it has been properly initialized.
- */
- PAUSE
- if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
- cy_writel(cy_pci_addr2 + ID_ADDRESS, 0L);
-
- /* This must be a Cyclades-8Zo/PCI. The extendable
- version will have a different device_id and will
- be allocated its maximum number of ports. */
- cy_pci_nchan = 8;
-
- if((cy_next_channel+cy_pci_nchan) > NR_PORTS) {
- printk("Cyclades-8Zo/PCI found at 0x%lx ",
- (ulong)cy_pci_phys2);
- printk("but no channels are available.\n");
- printk("Change NR_PORTS in cyclades.c and recompile kernel.\n");
- return(i);
- }
-
- /* fill the next cy_card structure available */
- for (j = 0 ; j < NR_CARDS ; j++) {
- if (cy_card[j].base_addr == 0) break;
- }
- if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclades-8Zo/PCI found at 0x%lx ",
- (ulong)cy_pci_phys2);
- printk("but no more cards can be used.\n");
- printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
- return(i);
- }
+ /* The following clears the firmware id word. This
+ ensures that the driver will not attempt to talk to
+ the board until it has been properly initialized.
+ */
+ PAUSE;
+ if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
+ cy_writel(cy_pci_addr2 + ID_ADDRESS, 0L);
+
+ /* This must be a Cyclades-8Zo/PCI. The extendable
+ version will have a different device_id and will
+ be allocated its maximum number of ports. */
+ cy_pci_nchan = 8;
+
+ if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) {
+ printk("Cyclades-8Zo/PCI found at 0x%lx but"
+ "no channels are available.\nChange "
+ "NR_PORTS in cyclades.c and recompile "
+ "kernel.\n", (ulong)cy_pci_phys2);
+ return i;
+ }
+ /* fill the next cy_card structure available */
+ for (j = 0; j < NR_CARDS; j++) {
+ if (cy_card[j].base_addr == 0)
+ break;
+ }
+ if (j == NR_CARDS) { /* no more cy_cards available */
+ printk("Cyclades-8Zo/PCI found at 0x%lx but"
+ "no more cards can be used.\nChange "
+ "NR_CARDS in cyclades.c and recompile "
+ "kernel.\n", (ulong)cy_pci_phys2);
+ return i;
+ }
+#ifdef CONFIG_CYZ_INTR
+ /* allocate IRQ only if board has an IRQ */
+ if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) {
+ if (request_irq(cy_pci_irq, cyz_interrupt,
+ IRQF_SHARED, "Cyclades-Z",
+ &cy_card[j])) {
+ printk("Cyclom-8Zo/PCI found at 0x%lx "
+ "but could not allocate "
+ "IRQ%d.\n", (ulong)cy_pci_phys2,
+ cy_pci_irq);
+ return i;
+ }
+ }
+#endif /* CONFIG_CYZ_INTR */
+
+ /* set cy_card */
+ cy_card[j].base_phys = cy_pci_phys2;
+ cy_card[j].ctl_phys = cy_pci_phys0;
+ cy_card[j].base_addr = cy_pci_addr2;
+ cy_card[j].ctl_addr = cy_pci_addr0;
+ cy_card[j].irq = (int)cy_pci_irq;
+ cy_card[j].bus_index = 1;
+ cy_card[j].first_line = cy_next_channel;
+ cy_card[j].num_chips = -1;
+ cy_card[j].pdev = pdev;
+
+ /* print message */
#ifdef CONFIG_CYZ_INTR
- /* allocate IRQ only if board has an IRQ */
- if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) {
- if(request_irq(cy_pci_irq, cyz_interrupt,
- IRQF_SHARED, "Cyclades-Z", &cy_card[j]))
- {
- printk("Cyclom-8Zo/PCI found at 0x%lx ",
- (ulong) cy_pci_phys2);
- printk("but could not allocate IRQ%d.\n",
- cy_pci_irq);
- return(i);
- }
+ /* don't report IRQ if board is no IRQ */
+ if ((cy_pci_irq != 0) && (cy_pci_irq != 255))
+ printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, "
+ "IRQ%d, ", j + 1, (ulong)cy_pci_phys2,
+ (ulong) (cy_pci_phys2 + CyPCI_Zwin - 1),
+ (int)cy_pci_irq);
+ else
+#endif /* CONFIG_CYZ_INTR */
+ printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, ",
+ j + 1, (ulong)cy_pci_phys2,
+ (ulong)(cy_pci_phys2 + CyPCI_Zwin - 1));
+
+ printk("%d channels starting from port %d.\n",
+ cy_pci_nchan, cy_next_channel);
+ cy_next_channel += cy_pci_nchan;
}
-#endif /* CONFIG_CYZ_INTR */
-
-
- /* set cy_card */
- cy_card[j].base_phys = cy_pci_phys2;
- cy_card[j].ctl_phys = cy_pci_phys0;
- cy_card[j].base_addr = cy_pci_addr2;
- cy_card[j].ctl_addr = cy_pci_addr0;
- cy_card[j].irq = (int) cy_pci_irq;
- cy_card[j].bus_index = 1;
- cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = -1;
- cy_card[j].pdev = pdev;
+ }
- /* print message */
-#ifdef CONFIG_CYZ_INTR
- /* don't report IRQ if board is no IRQ */
- if( (cy_pci_irq != 0) && (cy_pci_irq != 255) )
- printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
- j+1,(ulong)cy_pci_phys2,
- (ulong)(cy_pci_phys2 + CyPCI_Zwin - 1),
- (int)cy_pci_irq);
- else
-#endif /* CONFIG_CYZ_INTR */
- printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, ",
- j+1,(ulong)cy_pci_phys2,
- (ulong)(cy_pci_phys2 + CyPCI_Zwin - 1));
-
- printk("%d channels starting from port %d.\n",
- cy_pci_nchan,cy_next_channel);
- cy_next_channel += cy_pci_nchan;
- }
- }
-
- for (; ZeIndex != 0 && i < NR_CARDS; i++) {
- cy_pci_phys0 = Ze_phys0[0];
- cy_pci_phys2 = Ze_phys2[0];
- cy_pci_addr0 = Ze_addr0[0];
- cy_pci_addr2 = Ze_addr2[0];
- cy_pci_irq = Ze_irq[0];
- pdev = Ze_pdev[0];
- for (j = 0 ; j < ZeIndex-1 ; j++) {
- Ze_phys0[j] = Ze_phys0[j+1];
- Ze_phys2[j] = Ze_phys2[j+1];
- Ze_addr0[j] = Ze_addr0[j+1];
- Ze_addr2[j] = Ze_addr2[j+1];
- Ze_irq[j] = Ze_irq[j+1];
- Ze_pdev[j] = Ze_pdev[j+1];
- }
- ZeIndex--;
- mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *)
- cy_pci_addr0)->mail_box_0);
+ for (; ZeIndex != 0 && i < NR_CARDS; i++) {
+ cy_pci_phys0 = Ze_phys0[0];
+ cy_pci_phys2 = Ze_phys2[0];
+ cy_pci_addr0 = Ze_addr0[0];
+ cy_pci_addr2 = Ze_addr2[0];
+ cy_pci_irq = Ze_irq[0];
+ pdev = Ze_pdev[0];
+ for (j = 0; j < ZeIndex - 1; j++) {
+ Ze_phys0[j] = Ze_phys0[j + 1];
+ Ze_phys2[j] = Ze_phys2[j + 1];
+ Ze_addr0[j] = Ze_addr0[j + 1];
+ Ze_addr2[j] = Ze_addr2[j + 1];
+ Ze_irq[j] = Ze_irq[j + 1];
+ Ze_pdev[j] = Ze_pdev[j + 1];
+ }
+ ZeIndex--;
+ mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *)
+ cy_pci_addr0)->mail_box_0);
#ifdef CY_PCI_DEBUG
- printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n",
- (ulong)cy_pci_addr2, (ulong)cy_pci_addr0);
- printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not loaded\n");
+ printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n",
+ (ulong)cy_pci_addr2, (ulong)cy_pci_addr0);
+ printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not "
+ "loaded\n");
#endif
- PAUSE
- /* This must be the new Cyclades-Ze/PCI. */
- cy_pci_nchan = ZE_V1_NPORTS;
-
- if((cy_next_channel+cy_pci_nchan) > NR_PORTS) {
- printk("Cyclades-Ze/PCI found at 0x%lx ",
- (ulong)cy_pci_phys2);
- printk("but no channels are available.\n");
- printk("Change NR_PORTS in cyclades.c and recompile kernel.\n");
- return(i);
- }
-
- /* fill the next cy_card structure available */
- for (j = 0 ; j < NR_CARDS ; j++) {
- if (cy_card[j].base_addr == 0) break;
- }
- if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclades-Ze/PCI found at 0x%lx ",
- (ulong)cy_pci_phys2);
- printk("but no more cards can be used.\n");
- printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
- return(i);
- }
+ PAUSE;
+ /* This must be the new Cyclades-Ze/PCI. */
+ cy_pci_nchan = ZE_V1_NPORTS;
+
+ if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) {
+ printk("Cyclades-Ze/PCI found at 0x%lx but no channels "
+ "are available.\nChange NR_PORTS in cyclades.c "
+ "and recompile kernel.\n",
+ (ulong) cy_pci_phys2);
+ return i;
+ }
+ /* fill the next cy_card structure available */
+ for (j = 0; j < NR_CARDS; j++) {
+ if (cy_card[j].base_addr == 0)
+ break;
+ }
+ if (j == NR_CARDS) { /* no more cy_cards available */
+ printk("Cyclades-Ze/PCI found at 0x%lx but no more "
+ "cards can be used.\nChange NR_CARDS in "
+ "cyclades.c and recompile kernel.\n",
+ (ulong) cy_pci_phys2);
+ return i;
+ }
#ifdef CONFIG_CYZ_INTR
- /* allocate IRQ only if board has an IRQ */
- if( (cy_pci_irq != 0) && (cy_pci_irq != 255) ) {
- if(request_irq(cy_pci_irq, cyz_interrupt,
- IRQF_SHARED, "Cyclades-Z", &cy_card[j]))
- {
- printk("Cyclom-Ze/PCI found at 0x%lx ",
- (ulong) cy_pci_phys2);
- printk("but could not allocate IRQ%d.\n",
- cy_pci_irq);
- return(i);
- }
+ /* allocate IRQ only if board has an IRQ */
+ if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) {
+ if (request_irq(cy_pci_irq, cyz_interrupt,
+ IRQF_SHARED, "Cyclades-Z",
+ &cy_card[j])) {
+ printk("Cyclom-Ze/PCI found at 0x%lx ",
+ (ulong) cy_pci_phys2);
+ printk("but could not allocate IRQ%d.\n",
+ cy_pci_irq);
+ return i;
+ }
}
-#endif /* CONFIG_CYZ_INTR */
-
- /* set cy_card */
- cy_card[j].base_phys = cy_pci_phys2;
- cy_card[j].ctl_phys = cy_pci_phys0;
- cy_card[j].base_addr = cy_pci_addr2;
- cy_card[j].ctl_addr = cy_pci_addr0;
- cy_card[j].irq = (int) cy_pci_irq;
- cy_card[j].bus_index = 1;
- cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = -1;
+#endif /* CONFIG_CYZ_INTR */
+
+ /* set cy_card */
+ cy_card[j].base_phys = cy_pci_phys2;
+ cy_card[j].ctl_phys = cy_pci_phys0;
+ cy_card[j].base_addr = cy_pci_addr2;
+ cy_card[j].ctl_addr = cy_pci_addr0;
+ cy_card[j].irq = (int)cy_pci_irq;
+ cy_card[j].bus_index = 1;
+ cy_card[j].first_line = cy_next_channel;
+ cy_card[j].num_chips = -1;
cy_card[j].pdev = pdev;
- /* print message */
+ /* print message */
#ifdef CONFIG_CYZ_INTR
/* don't report IRQ if board is no IRQ */
- if( (cy_pci_irq != 0) && (cy_pci_irq != 255) )
- printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
- j+1,(ulong)cy_pci_phys2,
- (ulong)(cy_pci_phys2 + CyPCI_Ze_win - 1),
- (int)cy_pci_irq);
+ if ((cy_pci_irq != 0) && (cy_pci_irq != 255))
+ printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
+ j + 1, (ulong) cy_pci_phys2,
+ (ulong) (cy_pci_phys2 + CyPCI_Ze_win - 1),
+ (int)cy_pci_irq);
else
-#endif /* CONFIG_CYZ_INTR */
- printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, ",
- j+1,(ulong)cy_pci_phys2,
- (ulong)(cy_pci_phys2 + CyPCI_Ze_win - 1));
-
- printk("%d channels starting from port %d.\n",
- cy_pci_nchan,cy_next_channel);
- cy_next_channel += cy_pci_nchan;
- }
+#endif /* CONFIG_CYZ_INTR */
+ printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, ",
+ j + 1, (ulong) cy_pci_phys2,
+ (ulong) (cy_pci_phys2 + CyPCI_Ze_win - 1));
+
+ printk("%d channels starting from port %d.\n",
+ cy_pci_nchan, cy_next_channel);
+ cy_next_channel += cy_pci_nchan;
+ }
if (ZeIndex != 0) {
- printk("Cyclades-Ze/PCI found at 0x%x ",
- (unsigned int) Ze_phys2[0]);
- printk("but no more cards can be used.\n");
- printk("Change NR_CARDS in cyclades.c and recompile kernel.\n");
+ printk("Cyclades-Ze/PCI found at 0x%x but no more cards can be "
+ "used.\nChange NR_CARDS in cyclades.c and recompile "
+ "kernel.\n", (unsigned int)Ze_phys2[0]);
}
- return(i);
+ return i;
#else
- return(0);
-#endif /* ifdef CONFIG_PCI */
-} /* cy_detect_pci */
-
+ return 0;
+#endif /* ifdef CONFIG_PCI */
+} /* cy_detect_pci */
/*
* This routine prints out the appropriate serial driver version number
* and identifies which options were configured into this driver.
*/
-static inline void
-show_version(void)
+static inline void show_version(void)
{
- char *rcsvers, *rcsdate, *tmp;
- rcsvers = strchr(rcsid, ' '); rcsvers++;
- tmp = strchr(rcsvers, ' '); *tmp++ = '\0';
- rcsdate = strchr(tmp, ' '); rcsdate++;
- tmp = strrchr(rcsdate, ' '); *tmp = '\0';
- printk("Cyclades driver %s %s\n",
- rcsvers, rcsdate);
- printk(" built %s %s\n",
- __DATE__, __TIME__);
-} /* show_version */
-
-static int
+ printk("Cyclades driver " CY_VERSION "\n");
+ printk(" built %s %s\n", __DATE__, __TIME__);
+} /* show_version */
+
+static int
cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
- int *eof, void *data)
+ int *eof, void *data)
{
- struct cyclades_port *info;
- int i;
- int len=0;
- off_t begin=0;
- off_t pos=0;
- int size;
- __u32 cur_jifs = jiffies;
-
- size = sprintf(buf, "Dev TimeOpen BytesOut IdleOut BytesIn IdleIn Overruns Ldisc\n");
-
- pos += size;
- len += size;
-
- /* Output one line for each known port */
- for (i = 0; i < NR_PORTS && cy_port[i].line >= 0; i++) {
- info = &cy_port[i];
-
- if (info->count)
- size = sprintf(buf+len,
- "%3d %8lu %10lu %8lu %10lu %8lu %9lu %6ld\n",
- info->line,
- JIFFIES_DIFF(info->idle_stats.in_use, cur_jifs) / HZ,
- info->idle_stats.xmit_bytes,
- JIFFIES_DIFF(info->idle_stats.xmit_idle, cur_jifs) / HZ,
- info->idle_stats.recv_bytes,
- JIFFIES_DIFF(info->idle_stats.recv_idle, cur_jifs) / HZ,
- info->idle_stats.overruns,
- (long) info->tty->ldisc.num);
- else
- size = sprintf(buf+len,
- "%3d %8lu %10lu %8lu %10lu %8lu %9lu %6ld\n",
- info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
+ struct cyclades_port *info;
+ int i;
+ int len = 0;
+ off_t begin = 0;
+ off_t pos = 0;
+ int size;
+ __u32 cur_jifs = jiffies;
+
+ size = sprintf(buf, "Dev TimeOpen BytesOut IdleOut BytesIn "
+ "IdleIn Overruns Ldisc\n");
+
+ pos += size;
len += size;
- pos = begin + len;
- if (pos < offset) {
- len = 0;
- begin = pos;
+ /* Output one line for each known port */
+ for (i = 0; i < NR_PORTS && cy_port[i].line >= 0; i++) {
+ info = &cy_port[i];
+
+ if (info->count)
+ size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu "
+ "%8lu %9lu %6ld\n", info->line,
+ (cur_jifs - info->idle_stats.in_use) / HZ,
+ info->idle_stats.xmit_bytes,
+ (cur_jifs - info->idle_stats.xmit_idle) / HZ,
+ info->idle_stats.recv_bytes,
+ (cur_jifs - info->idle_stats.recv_idle) / HZ,
+ info->idle_stats.overruns,
+ (long)info->tty->ldisc.num);
+ else
+ size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu "
+ "%8lu %9lu %6ld\n",
+ info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
+ len += size;
+ pos = begin + len;
+
+ if (pos < offset) {
+ len = 0;
+ begin = pos;
+ }
+ if (pos > offset + length)
+ goto done;
}
- if (pos > offset + length)
- goto done;
- }
- *eof = 1;
+ *eof = 1;
done:
- *start = buf + (offset - begin); /* Start of wanted data */
- len -= (offset - begin); /* Start slop */
- if (len > length)
- len = length; /* Ending slop */
- if (len < 0)
- len = 0;
- return len;
+ *start = buf + (offset - begin); /* Start of wanted data */
+ len -= (offset - begin); /* Start slop */
+ if (len > length)
+ len = length; /* Ending slop */
+ if (len < 0)
+ len = 0;
+ return len;
}
/* The serial driver boot-time initialization code!
*/
static const struct tty_operations cy_ops = {
- .open = cy_open,
- .close = cy_close,
- .write = cy_write,
- .put_char = cy_put_char,
- .flush_chars = cy_flush_chars,
- .write_room = cy_write_room,
- .chars_in_buffer = cy_chars_in_buffer,
- .flush_buffer = cy_flush_buffer,
- .ioctl = cy_ioctl,
- .throttle = cy_throttle,
- .unthrottle = cy_unthrottle,
- .set_termios = cy_set_termios,
- .stop = cy_stop,
- .start = cy_start,
- .hangup = cy_hangup,
- .break_ctl = cy_break,
- .wait_until_sent = cy_wait_until_sent,
- .read_proc = cyclades_get_proc_info,
- .tiocmget = cy_tiocmget,
- .tiocmset = cy_tiocmset,
+ .open = cy_open,
+ .close = cy_close,
+ .write = cy_write,
+ .put_char = cy_put_char,
+ .flush_chars = cy_flush_chars,
+ .write_room = cy_write_room,
+ .chars_in_buffer = cy_chars_in_buffer,
+ .flush_buffer = cy_flush_buffer,
+ .ioctl = cy_ioctl,
+ .throttle = cy_throttle,
+ .unthrottle = cy_unthrottle,
+ .set_termios = cy_set_termios,
+ .stop = cy_stop,
+ .start = cy_start,
+ .hangup = cy_hangup,
+ .break_ctl = cy_break,
+ .wait_until_sent = cy_wait_until_sent,
+ .read_proc = cyclades_get_proc_info,
+ .tiocmget = cy_tiocmget,
+ .tiocmset = cy_tiocmset,
};
-static int __init
-cy_init(void)
+static int __init cy_init(void)
{
- struct cyclades_port *info;
- struct cyclades_card *cinfo;
- int number_z_boards = 0;
- int board,port,i,index;
- unsigned long mailbox;
- unsigned short chip_number;
- int nports;
-
- cy_serial_driver = alloc_tty_driver(NR_PORTS);
- if (!cy_serial_driver)
- return -ENOMEM;
- show_version();
-
- /* Initialize the tty_driver structure */
-
- cy_serial_driver->owner = THIS_MODULE;
- cy_serial_driver->driver_name = "cyclades";
- cy_serial_driver->name = "ttyC";
- cy_serial_driver->major = CYCLADES_MAJOR;
- cy_serial_driver->minor_start = 0;
- cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
- cy_serial_driver->init_termios = tty_std_termios;
- cy_serial_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- cy_serial_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(cy_serial_driver, &cy_ops);
-
- if (tty_register_driver(cy_serial_driver))
- panic("Couldn't register Cyclades serial driver\n");
-
- for (i = 0; i < NR_CARDS; i++) {
- /* base_addr=0 indicates board not found */
- cy_card[i].base_addr = NULL;
- }
-
- /* the code below is responsible to find the boards. Each different
- type of board has its own detection routine. If a board is found,
- the next cy_card structure available is set by the detection
- routine. These functions are responsible for checking the
- availability of cy_card and cy_port data structures and updating
- the cy_next_channel. */
-
- /* look for isa boards */
- cy_isa_nboard = cy_detect_isa();
-
- /* look for pci boards */
- cy_pci_nboard = cy_detect_pci();
-
- cy_nboard = cy_isa_nboard + cy_pci_nboard;
-
- /* invalidate remaining cy_card structures */
- for (i = 0 ; i < NR_CARDS ; i++) {
- if (cy_card[i].base_addr == 0) {
- cy_card[i].first_line = -1;
- cy_card[i].ctl_addr = NULL;
- cy_card[i].irq = 0;
- cy_card[i].bus_index = 0;
- cy_card[i].first_line = 0;
- cy_card[i].num_chips = 0;
- }
- }
- /* invalidate remaining cy_port structures */
- for (i = cy_next_channel ; i < NR_PORTS ; i++) {
- cy_port[i].line = -1;
- cy_port[i].magic = -1;
- }
-
- /* initialize per-port data structures for each valid board found */
- for (board = 0 ; board < cy_nboard ; board++) {
- cinfo = &cy_card[board];
- if (cinfo->num_chips == -1) { /* Cyclades-Z */
- number_z_boards++;
- mailbox = cy_readl(&((struct RUNTIME_9060 __iomem *)
- cy_card[board].ctl_addr)->mail_box_0);
- nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8;
- cinfo->intr_enabled = 0;
- cinfo->nports = 0; /* Will be correctly set later, after
- Z FW is loaded */
- spin_lock_init(&cinfo->card_lock);
- for (port = cinfo->first_line ;
- port < cinfo->first_line + nports;
- port++)
- {
- info = &cy_port[port];
- info->magic = CYCLADES_MAGIC;
- info->type = PORT_STARTECH;
- info->card = board;
- info->line = port;
- info->chip_rev = 0;
- info->flags = STD_COM_FLAGS;
- info->tty = NULL;
- if (mailbox == ZO_V1)
- info->xmit_fifo_size = CYZ_FIFO_SIZE;
- else
- info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
- info->cor1 = 0;
- info->cor2 = 0;
- info->cor3 = 0;
- info->cor4 = 0;
- info->cor5 = 0;
- info->tbpr = 0;
- info->tco = 0;
- info->rbpr = 0;
- info->rco = 0;
- info->custom_divisor = 0;
- info->close_delay = 5*HZ/10;
- info->closing_wait = CLOSING_WAIT_DELAY;
- info->icount.cts = info->icount.dsr =
- info->icount.rng = info->icount.dcd = 0;
- info->icount.rx = info->icount.tx = 0;
- info->icount.frame = info->icount.parity = 0;
- info->icount.overrun = info->icount.brk = 0;
- info->x_char = 0;
- info->event = 0;
- info->count = 0;
- info->blocked_open = 0;
- info->default_threshold = 0;
- info->default_timeout = 0;
- INIT_WORK(&info->tqueue, do_softint);
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
- init_waitqueue_head(&info->shutdown_wait);
- init_waitqueue_head(&info->delta_msr_wait);
- /* info->session */
- /* info->pgrp */
- info->read_status_mask = 0;
- /* info->timeout */
- /* Bentson's vars */
- info->jiffies[0] = 0;
- info->jiffies[1] = 0;
- info->jiffies[2] = 0;
- info->rflush_count = 0;
+ struct cyclades_port *info;
+ struct cyclades_card *cinfo;
+ int number_z_boards = 0;
+ int board, port, i, index;
+ unsigned long mailbox;
+ unsigned short chip_number;
+ int nports;
+
+ cy_serial_driver = alloc_tty_driver(NR_PORTS);
+ if (!cy_serial_driver)
+ return -ENOMEM;
+ show_version();
+
+ /* Initialize the tty_driver structure */
+
+ cy_serial_driver->owner = THIS_MODULE;
+ cy_serial_driver->driver_name = "cyclades";
+ cy_serial_driver->name = "ttyC";
+ cy_serial_driver->major = CYCLADES_MAJOR;
+ cy_serial_driver->minor_start = 0;
+ cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ cy_serial_driver->init_termios = tty_std_termios;
+ cy_serial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ cy_serial_driver->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(cy_serial_driver, &cy_ops);
+
+ if (tty_register_driver(cy_serial_driver))
+ panic("Couldn't register Cyclades serial driver\n");
+
+ for (i = 0; i < NR_CARDS; i++) {
+ /* base_addr=0 indicates board not found */
+ cy_card[i].base_addr = NULL;
+ }
+
+ /* the code below is responsible to find the boards. Each different
+ type of board has its own detection routine. If a board is found,
+ the next cy_card structure available is set by the detection
+ routine. These functions are responsible for checking the
+ availability of cy_card and cy_port data structures and updating
+ the cy_next_channel. */
+
+ /* look for isa boards */
+ cy_isa_nboard = cy_detect_isa();
+
+ /* look for pci boards */
+ cy_pci_nboard = cy_detect_pci();
+
+ cy_nboard = cy_isa_nboard + cy_pci_nboard;
+
+ /* invalidate remaining cy_card structures */
+ for (i = 0; i < NR_CARDS; i++) {
+ if (cy_card[i].base_addr == 0) {
+ cy_card[i].first_line = -1;
+ cy_card[i].ctl_addr = NULL;
+ cy_card[i].irq = 0;
+ cy_card[i].bus_index = 0;
+ cy_card[i].first_line = 0;
+ cy_card[i].num_chips = 0;
+ }
+ }
+ /* invalidate remaining cy_port structures */
+ for (i = cy_next_channel; i < NR_PORTS; i++) {
+ cy_port[i].line = -1;
+ cy_port[i].magic = -1;
+ }
+
+ /* initialize per-port data structures for each valid board found */
+ for (board = 0; board < cy_nboard; board++) {
+ cinfo = &cy_card[board];
+ if (cinfo->num_chips == -1) { /* Cyclades-Z */
+ number_z_boards++;
+ mailbox = cy_readl(&((struct RUNTIME_9060 __iomem *)
+ cy_card[board].ctl_addr)->
+ mail_box_0);
+ nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8;
+ cinfo->intr_enabled = 0;
+ cinfo->nports = 0; /* Will be correctly set later, after
+ Z FW is loaded */
+ spin_lock_init(&cinfo->card_lock);
+ for (port = cinfo->first_line;
+ port < cinfo->first_line + nports; port++) {
+ info = &cy_port[port];
+ info->magic = CYCLADES_MAGIC;
+ info->type = PORT_STARTECH;
+ info->card = board;
+ info->line = port;
+ info->chip_rev = 0;
+ info->flags = STD_COM_FLAGS;
+ info->tty = NULL;
+ if (mailbox == ZO_V1)
+ info->xmit_fifo_size = CYZ_FIFO_SIZE;
+ else
+ info->xmit_fifo_size =
+ 4 * CYZ_FIFO_SIZE;
+ info->cor1 = 0;
+ info->cor2 = 0;
+ info->cor3 = 0;
+ info->cor4 = 0;
+ info->cor5 = 0;
+ info->tbpr = 0;
+ info->tco = 0;
+ info->rbpr = 0;
+ info->rco = 0;
+ info->custom_divisor = 0;
+ info->close_delay = 5 * HZ / 10;
+ info->closing_wait = CLOSING_WAIT_DELAY;
+ info->icount.cts = info->icount.dsr =
+ info->icount.rng = info->icount.dcd = 0;
+ info->icount.rx = info->icount.tx = 0;
+ info->icount.frame = info->icount.parity = 0;
+ info->icount.overrun = info->icount.brk = 0;
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+ info->blocked_open = 0;
+ info->default_threshold = 0;
+ info->default_timeout = 0;
+ INIT_WORK(&info->tqueue, do_softint);
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ init_waitqueue_head(&info->shutdown_wait);
+ init_waitqueue_head(&info->delta_msr_wait);
+ /* info->session */
+ /* info->pgrp */
+ info->read_status_mask = 0;
+ /* info->timeout */
+ /* Bentson's vars */
+ info->jiffies[0] = 0;
+ info->jiffies[1] = 0;
+ info->jiffies[2] = 0;
+ info->rflush_count = 0;
#ifdef CONFIG_CYZ_INTR
- init_timer(&cyz_rx_full_timer[port]);
- cyz_rx_full_timer[port].function = NULL;
+ init_timer(&cyz_rx_full_timer[port]);
+ cyz_rx_full_timer[port].function = NULL;
#endif
- }
- continue;
- }else{ /* Cyclom-Y of some kind*/
- index = cinfo->bus_index;
- spin_lock_init(&cinfo->card_lock);
- cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips;
- for (port = cinfo->first_line ;
- port < cinfo->first_line + cinfo->nports ;
- port++)
- {
- info = &cy_port[port];
- info->magic = CYCLADES_MAGIC;
- info->type = PORT_CIRRUS;
- info->card = board;
- info->line = port;
- info->flags = STD_COM_FLAGS;
- info->tty = NULL;
- info->xmit_fifo_size = CyMAX_CHAR_FIFO;
- info->cor1 = CyPARITY_NONE|Cy_1_STOP|Cy_8_BITS;
- info->cor2 = CyETC;
- info->cor3 = 0x08; /* _very_ small rcv threshold */
- info->cor4 = 0;
- info->cor5 = 0;
- info->custom_divisor = 0;
- info->close_delay = 5*HZ/10;
- info->closing_wait = CLOSING_WAIT_DELAY;
- info->icount.cts = info->icount.dsr =
- info->icount.rng = info->icount.dcd = 0;
- info->icount.rx = info->icount.tx = 0;
- info->icount.frame = info->icount.parity = 0;
- info->icount.overrun = info->icount.brk = 0;
- chip_number = (port - cinfo->first_line) / 4;
- if ((info->chip_rev =
- cy_readb(cinfo->base_addr +
- (cy_chip_offset[chip_number]<<index) +
- (CyGFRCR<<index))) >= CD1400_REV_J) {
- /* It is a CD1400 rev. J or later */
- info->tbpr = baud_bpr_60[13]; /* Tx BPR */
- info->tco = baud_co_60[13]; /* Tx CO */
- info->rbpr = baud_bpr_60[13]; /* Rx BPR */
- info->rco = baud_co_60[13]; /* Rx CO */
- info->rflow = 0;
- info->rtsdtr_inv = 1;
- } else {
- info->tbpr = baud_bpr_25[13]; /* Tx BPR */
- info->tco = baud_co_25[13]; /* Tx CO */
- info->rbpr = baud_bpr_25[13]; /* Rx BPR */
- info->rco = baud_co_25[13]; /* Rx CO */
- info->rflow = 0;
- info->rtsdtr_inv = 0;
- }
- info->x_char = 0;
- info->event = 0;
- info->count = 0;
- info->blocked_open = 0;
- info->default_threshold = 0;
- info->default_timeout = 0;
- INIT_WORK(&info->tqueue, do_softint);
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
- init_waitqueue_head(&info->shutdown_wait);
- init_waitqueue_head(&info->delta_msr_wait);
- /* info->session */
- /* info->pgrp */
- info->read_status_mask =
- CyTIMEOUT| CySPECHAR| CyBREAK
- | CyPARITY| CyFRAME| CyOVERRUN;
- /* info->timeout */
- }
- }
- }
+ }
+ continue;
+ } else { /* Cyclom-Y of some kind */
+ index = cinfo->bus_index;
+ spin_lock_init(&cinfo->card_lock);
+ cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips;
+ for (port = cinfo->first_line;
+ port < cinfo->first_line + cinfo->nports; port++) {
+ info = &cy_port[port];
+ info->magic = CYCLADES_MAGIC;
+ info->type = PORT_CIRRUS;
+ info->card = board;
+ info->line = port;
+ info->flags = STD_COM_FLAGS;
+ info->tty = NULL;
+ info->xmit_fifo_size = CyMAX_CHAR_FIFO;
+ info->cor1 =
+ CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
+ info->cor2 = CyETC;
+ info->cor3 = 0x08; /* _very_ small rcv threshold */
+ info->cor4 = 0;
+ info->cor5 = 0;
+ info->custom_divisor = 0;
+ info->close_delay = 5 * HZ / 10;
+ info->closing_wait = CLOSING_WAIT_DELAY;
+ info->icount.cts = info->icount.dsr =
+ info->icount.rng = info->icount.dcd = 0;
+ info->icount.rx = info->icount.tx = 0;
+ info->icount.frame = info->icount.parity = 0;
+ info->icount.overrun = info->icount.brk = 0;
+ chip_number = (port - cinfo->first_line) / 4;
+ if ((info->chip_rev =
+ cy_readb(cinfo->base_addr +
+ (cy_chip_offset[chip_number] <<
+ index) + (CyGFRCR << index))) >=
+ CD1400_REV_J) {
+ /* It is a CD1400 rev. J or later */
+ info->tbpr = baud_bpr_60[13]; /* Tx BPR */
+ info->tco = baud_co_60[13]; /* Tx CO */
+ info->rbpr = baud_bpr_60[13]; /* Rx BPR */
+ info->rco = baud_co_60[13]; /* Rx CO */
+ info->rflow = 0;
+ info->rtsdtr_inv = 1;
+ } else {
+ info->tbpr = baud_bpr_25[13]; /* Tx BPR */
+ info->tco = baud_co_25[13]; /* Tx CO */
+ info->rbpr = baud_bpr_25[13]; /* Rx BPR */
+ info->rco = baud_co_25[13]; /* Rx CO */
+ info->rflow = 0;
+ info->rtsdtr_inv = 0;
+ }
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+ info->blocked_open = 0;
+ info->default_threshold = 0;
+ info->default_timeout = 0;
+ INIT_WORK(&info->tqueue, do_softint);
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ init_waitqueue_head(&info->shutdown_wait);
+ init_waitqueue_head(&info->delta_msr_wait);
+ /* info->session */
+ /* info->pgrp */
+ info->read_status_mask =
+ CyTIMEOUT | CySPECHAR | CyBREAK
+ | CyPARITY | CyFRAME | CyOVERRUN;
+ /* info->timeout */
+ }
+ }
+ }
#ifndef CONFIG_CYZ_INTR
- if (number_z_boards && !cyz_timeron){
- cyz_timeron++;
- cyz_timerlist.expires = jiffies + 1;
- add_timer(&cyz_timerlist);
+ if (number_z_boards && !cyz_timeron) {
+ cyz_timeron++;
+ cyz_timerlist.expires = jiffies + 1;
+ add_timer(&cyz_timerlist);
#ifdef CY_PCI_DEBUG
- printk("Cyclades-Z polling initialized\n");
+ printk("Cyclades-Z polling initialized\n");
#endif
- }
-#endif /* CONFIG_CYZ_INTR */
+ }
+#endif /* CONFIG_CYZ_INTR */
+
+ return 0;
- return 0;
-
-} /* cy_init */
+} /* cy_init */
-static void __exit
-cy_cleanup_module(void)
+static void __exit cy_cleanup_module(void)
{
- int i, e1;
+ int i, e1;
#ifndef CONFIG_CYZ_INTR
- if (cyz_timeron){
- cyz_timeron = 0;
- del_timer(&cyz_timerlist);
- }
+ if (cyz_timeron){
+ cyz_timeron = 0;
+ del_timer(&cyz_timerlist);
+ }
#endif /* CONFIG_CYZ_INTR */
- if ((e1 = tty_unregister_driver(cy_serial_driver)))
- printk("cyc: failed to unregister Cyclades serial driver(%d)\n",
- e1);
+ if ((e1 = tty_unregister_driver(cy_serial_driver)))
+ printk("cyc: failed to unregister Cyclades serial driver(%d)\n",
+ e1);
- put_tty_driver(cy_serial_driver);
+ put_tty_driver(cy_serial_driver);
- for (i = 0; i < NR_CARDS; i++) {
- if (cy_card[i].base_addr) {
- iounmap(cy_card[i].base_addr);
- if (cy_card[i].ctl_addr)
- iounmap(cy_card[i].ctl_addr);
- if (cy_card[i].irq
+ for (i = 0; i < NR_CARDS; i++) {
+ if (cy_card[i].base_addr) {
+ iounmap(cy_card[i].base_addr);
+ if (cy_card[i].ctl_addr)
+ iounmap(cy_card[i].ctl_addr);
+ if (cy_card[i].irq
#ifndef CONFIG_CYZ_INTR
- && cy_card[i].num_chips != -1 /* not a Z card */
+ && cy_card[i].num_chips != -1 /* not a Z card */
#endif /* CONFIG_CYZ_INTR */
- )
- free_irq(cy_card[i].irq, &cy_card[i]);
+ )
+ free_irq(cy_card[i].irq, &cy_card[i]);
#ifdef CONFIG_PCI
- if (cy_card[i].pdev)
- pci_release_regions(cy_card[i].pdev);
+ if (cy_card[i].pdev)
+ pci_release_regions(cy_card[i].pdev);
#endif
- }
- }
+ }
+ }
} /* cy_cleanup_module */
module_init(cy_init);
} drm_clip_rect_t;
/**
+ * Drawable information.
+ */
+typedef struct drm_drawable_info {
+ unsigned int num_rects;
+ drm_clip_rect_t *rects;
+} drm_drawable_info_t;
+
+/**
* Texture region,
*/
typedef struct drm_tex_region {
_DRM_PAGE_ALIGN = 0x01, /**< Align on page boundaries for DMA */
_DRM_AGP_BUFFER = 0x02, /**< Buffer is in AGP space */
_DRM_SG_BUFFER = 0x04, /**< Scatter/gather memory buffer */
- _DRM_FB_BUFFER = 0x08 /**< Buffer is in frame buffer */
+ _DRM_FB_BUFFER = 0x08, /**< Buffer is in frame buffer */
+ _DRM_PCI_BUFFER_RO = 0x10 /**< Map PCI DMA buffer read-only */
} flags;
unsigned long agp_start; /**<
* Start address of where the AGP buffers are
} drm_draw_t;
/**
+ * DRM_IOCTL_UPDATE_DRAW ioctl argument type.
+ */
+typedef enum {
+ DRM_DRAWABLE_CLIPRECTS,
+} drm_drawable_info_type_t;
+
+typedef struct drm_update_draw {
+ drm_drawable_t handle;
+ unsigned int type;
+ unsigned int num;
+ unsigned long long data;
+} drm_update_draw_t;
+
+/**
* DRM_IOCTL_GET_MAGIC and DRM_IOCTL_AUTH_MAGIC ioctl argument type.
*/
typedef struct drm_auth {
typedef enum {
_DRM_VBLANK_ABSOLUTE = 0x0, /**< Wait for specific vblank sequence number */
_DRM_VBLANK_RELATIVE = 0x1, /**< Wait for given number of vblanks */
+ _DRM_VBLANK_NEXTONMISS = 0x10000000, /**< If missed, wait for next vblank */
+ _DRM_VBLANK_SECONDARY = 0x20000000, /**< Secondary display controller */
_DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking */
} drm_vblank_seq_type_t;
-#define _DRM_VBLANK_FLAGS_MASK _DRM_VBLANK_SIGNAL
+#define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE)
+#define _DRM_VBLANK_FLAGS_MASK (_DRM_VBLANK_SIGNAL | _DRM_VBLANK_SECONDARY | \
+ _DRM_VBLANK_NEXTONMISS)
struct drm_wait_vblank_request {
drm_vblank_seq_type_t type;
#define DRM_IOCTL_WAIT_VBLANK DRM_IOWR(0x3a, drm_wait_vblank_t)
+#define DRM_IOCTL_UPDATE_DRAW DRM_IOW(0x3f, drm_update_draw_t)
+
/**
* Device specific ioctls should only be in their respective headers
* The device specific ioctl range is from 0x40 to 0x79.
#define DRIVER_IRQ_VBL 0x100
#define DRIVER_DMA_QUEUE 0x200
#define DRIVER_FB_DMA 0x400
+#define DRIVER_IRQ_VBL2 0x800
/***********************************************************************/
/** \name Begin the DRM... */
enum {
_DRM_DMA_USE_AGP = 0x01,
_DRM_DMA_USE_SG = 0x02,
- _DRM_DMA_USE_FB = 0x04
+ _DRM_DMA_USE_FB = 0x04,
+ _DRM_DMA_USE_PCI_RO = 0x08
} flags;
} drm_device_dma_t;
void (*kernel_context_switch_unlock) (struct drm_device * dev,
drm_lock_t *lock);
int (*vblank_wait) (struct drm_device * dev, unsigned int *sequence);
+ int (*vblank_wait2) (struct drm_device * dev, unsigned int *sequence);
int (*dri_library_name) (struct drm_device *dev, char *buf);
/**
wait_queue_head_t vbl_queue; /**< VBLANK wait queue */
atomic_t vbl_received;
+ atomic_t vbl_received2; /**< number of secondary VBLANK interrupts */
spinlock_t vbl_lock;
drm_vbl_sig_t vbl_sigs; /**< signal list to send on VBLANK */
+ drm_vbl_sig_t vbl_sigs2; /**< signals to send on secondary VBLANK */
unsigned int vbl_pending;
+ spinlock_t tasklet_lock; /**< For drm_locked_tasklet */
+ void (*locked_tasklet_func)(struct drm_device *dev);
/*@} */
cycles_t ctx_start;
drm_local_map_t *agp_buffer_map;
unsigned int agp_buffer_token;
drm_head_t primary; /**< primary screen head */
+
+ /** \name Drawable information */
+ /*@{ */
+ spinlock_t drw_lock;
+ unsigned int drw_bitfield_length;
+ u32 *drw_bitfield;
+ unsigned int drw_info_length;
+ drm_drawable_info_t **drw_info;
+ /*@} */
} drm_device_t;
static __inline__ int drm_core_check_feature(struct drm_device *dev,
unsigned int cmd, unsigned long arg);
extern int drm_rmdraw(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
+extern int drm_update_drawable_info(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg);
+extern drm_drawable_info_t *drm_get_drawable_info(drm_device_t *dev,
+ drm_drawable_t id);
/* Authentication IOCTL support (drm_auth.h) */
extern int drm_getmagic(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
extern int drm_vblank_wait(drm_device_t * dev, unsigned int *vbl_seq);
extern void drm_vbl_send_signals(drm_device_t * dev);
+extern void drm_locked_tasklet(drm_device_t *dev, void(*func)(drm_device_t*));
/* AGP/GART support (drm_agpsupport.h) */
extern drm_agp_head_t *drm_agp_init(drm_device_t * dev);
request->count = entry->buf_count;
request->size = size;
+ if (request->flags & _DRM_PCI_BUFFER_RO)
+ dma->flags = _DRM_DMA_USE_PCI_RO;
+
atomic_dec(&dev->buf_alloc);
return 0;
* \param arg pointer to a drm_buf_map structure.
* \return zero on success or a negative number on failure.
*
- * Maps the AGP or SG buffer region with do_mmap(), and copies information
- * about each buffer into user space. The PCI buffers are already mapped on the
- * addbufs_pci() call.
+ * Maps the AGP, SG or PCI buffer region with do_mmap(), and copies information
+ * about each buffer into user space. For PCI buffers, it calls do_mmap() with
+ * offset equal to 0, which drm_mmap() interpretes as PCI buffers and calls
+ * drm_mmap_dma().
*/
int drm_mapbufs(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg)
#define CORE_NAME "drm"
#define CORE_DESC "DRM shared core routines"
-#define CORE_DATE "20051102"
+#define CORE_DATE "20060810"
#define DRM_IF_MAJOR 1
-#define DRM_IF_MINOR 2
+#define DRM_IF_MINOR 3
#define CORE_MAJOR 1
-#define CORE_MINOR 0
-#define CORE_PATCHLEVEL 1
+#define CORE_MINOR 1
+#define CORE_PATCHLEVEL 0
*
* \author Rickard E. (Rik) Faith <faith@valinux.com>
* \author Gareth Hughes <gareth@valinux.com>
+ * \author Michel Dänzer <michel@tungstengraphics.com>
*/
/*
*
* Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * Copyright 2006 Tungsten Graphics, Inc., Bismarck, North Dakota.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
#include "drmP.h"
-/** No-op. */
-int drm_adddraw(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
+/**
+ * Allocate drawable ID and memory to store information about it.
+ */
+int drm_adddraw(DRM_IOCTL_ARGS)
{
+ DRM_DEVICE;
+ unsigned long irqflags;
+ int i, j;
+ u32 *bitfield = dev->drw_bitfield;
+ unsigned int bitfield_length = dev->drw_bitfield_length;
+ drm_drawable_info_t **info = dev->drw_info;
+ unsigned int info_length = dev->drw_info_length;
drm_draw_t draw;
- draw.handle = 0; /* NOOP */
+ for (i = 0, j = 0; i < bitfield_length; i++) {
+ if (bitfield[i] == ~0)
+ continue;
+
+ for (; j < 8 * sizeof(*bitfield); j++)
+ if (!(bitfield[i] & (1 << j)))
+ goto done;
+ }
+done:
+
+ if (i == bitfield_length) {
+ bitfield_length++;
+
+ bitfield = drm_alloc(bitfield_length * sizeof(*bitfield),
+ DRM_MEM_BUFS);
+
+ if (!bitfield) {
+ DRM_ERROR("Failed to allocate new drawable bitfield\n");
+ return DRM_ERR(ENOMEM);
+ }
+
+ if (8 * sizeof(*bitfield) * bitfield_length > info_length) {
+ info_length += 8 * sizeof(*bitfield);
+
+ info = drm_alloc(info_length * sizeof(*info),
+ DRM_MEM_BUFS);
+
+ if (!info) {
+ DRM_ERROR("Failed to allocate new drawable info"
+ " array\n");
+
+ drm_free(bitfield,
+ bitfield_length * sizeof(*bitfield),
+ DRM_MEM_BUFS);
+ return DRM_ERR(ENOMEM);
+ }
+ }
+
+ bitfield[i] = 0;
+ }
+
+ draw.handle = i * 8 * sizeof(*bitfield) + j + 1;
DRM_DEBUG("%d\n", draw.handle);
- if (copy_to_user((drm_draw_t __user *) arg, &draw, sizeof(draw)))
- return -EFAULT;
+
+ spin_lock_irqsave(&dev->drw_lock, irqflags);
+
+ bitfield[i] |= 1 << j;
+ info[draw.handle - 1] = NULL;
+
+ if (bitfield != dev->drw_bitfield) {
+ memcpy(bitfield, dev->drw_bitfield, dev->drw_bitfield_length *
+ sizeof(*bitfield));
+ drm_free(dev->drw_bitfield, sizeof(*bitfield) *
+ dev->drw_bitfield_length, DRM_MEM_BUFS);
+ dev->drw_bitfield = bitfield;
+ dev->drw_bitfield_length = bitfield_length;
+ }
+
+ if (info != dev->drw_info) {
+ memcpy(info, dev->drw_info, dev->drw_info_length *
+ sizeof(*info));
+ drm_free(dev->drw_info, sizeof(*info) * dev->drw_info_length,
+ DRM_MEM_BUFS);
+ dev->drw_info = info;
+ dev->drw_info_length = info_length;
+ }
+
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+
+ DRM_COPY_TO_USER_IOCTL((drm_draw_t __user *)data, draw, sizeof(draw));
+
return 0;
}
-/** No-op. */
-int drm_rmdraw(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
+/**
+ * Free drawable ID and memory to store information about it.
+ */
+int drm_rmdraw(DRM_IOCTL_ARGS)
{
- return 0; /* NOOP */
+ DRM_DEVICE;
+ drm_draw_t draw;
+ int id, idx;
+ unsigned int shift;
+ unsigned long irqflags;
+ u32 *bitfield = dev->drw_bitfield;
+ unsigned int bitfield_length = dev->drw_bitfield_length;
+ drm_drawable_info_t **info = dev->drw_info;
+ unsigned int info_length = dev->drw_info_length;
+
+ DRM_COPY_FROM_USER_IOCTL(draw, (drm_draw_t __user *) data,
+ sizeof(draw));
+
+ id = draw.handle - 1;
+ idx = id / (8 * sizeof(*bitfield));
+ shift = id % (8 * sizeof(*bitfield));
+
+ if (idx < 0 || idx >= bitfield_length ||
+ !(bitfield[idx] & (1 << shift))) {
+ DRM_DEBUG("No such drawable %d\n", draw.handle);
+ return 0;
+ }
+
+ spin_lock_irqsave(&dev->drw_lock, irqflags);
+
+ bitfield[idx] &= ~(1 << shift);
+
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+
+ if (info[id]) {
+ drm_free(info[id]->rects, info[id]->num_rects *
+ sizeof(drm_clip_rect_t), DRM_MEM_BUFS);
+ drm_free(info[id], sizeof(**info), DRM_MEM_BUFS);
+ }
+
+ /* Can we shrink the arrays? */
+ if (idx == bitfield_length - 1) {
+ while (idx >= 0 && !bitfield[idx])
+ --idx;
+
+ bitfield_length = idx + 1;
+
+ if (idx != id / (8 * sizeof(*bitfield)))
+ bitfield = drm_alloc(bitfield_length *
+ sizeof(*bitfield), DRM_MEM_BUFS);
+
+ if (!bitfield && bitfield_length) {
+ bitfield = dev->drw_bitfield;
+ bitfield_length = dev->drw_bitfield_length;
+ }
+ }
+
+ if (bitfield != dev->drw_bitfield) {
+ info_length = 8 * sizeof(*bitfield) * bitfield_length;
+
+ info = drm_alloc(info_length * sizeof(*info), DRM_MEM_BUFS);
+
+ if (!info && info_length) {
+ info = dev->drw_info;
+ info_length = dev->drw_info_length;
+ }
+
+ spin_lock_irqsave(&dev->drw_lock, irqflags);
+
+ memcpy(bitfield, dev->drw_bitfield, bitfield_length *
+ sizeof(*bitfield));
+ drm_free(dev->drw_bitfield, sizeof(*bitfield) *
+ dev->drw_bitfield_length, DRM_MEM_BUFS);
+ dev->drw_bitfield = bitfield;
+ dev->drw_bitfield_length = bitfield_length;
+
+ if (info != dev->drw_info) {
+ memcpy(info, dev->drw_info, info_length *
+ sizeof(*info));
+ drm_free(dev->drw_info, sizeof(*info) *
+ dev->drw_info_length, DRM_MEM_BUFS);
+ dev->drw_info = info;
+ dev->drw_info_length = info_length;
+ }
+
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+ }
+
+ DRM_DEBUG("%d\n", draw.handle);
+ return 0;
+}
+
+int drm_update_drawable_info(DRM_IOCTL_ARGS) {
+ DRM_DEVICE;
+ drm_update_draw_t update;
+ unsigned int id, idx, shift;
+ u32 *bitfield = dev->drw_bitfield;
+ unsigned long irqflags, bitfield_length = dev->drw_bitfield_length;
+ drm_drawable_info_t *info;
+ drm_clip_rect_t *rects;
+ int err;
+
+ DRM_COPY_FROM_USER_IOCTL(update, (drm_update_draw_t __user *) data,
+ sizeof(update));
+
+ id = update.handle - 1;
+ idx = id / (8 * sizeof(*bitfield));
+ shift = id % (8 * sizeof(*bitfield));
+
+ if (idx < 0 || idx >= bitfield_length ||
+ !(bitfield[idx] & (1 << shift))) {
+ DRM_ERROR("No such drawable %d\n", update.handle);
+ return DRM_ERR(EINVAL);
+ }
+
+ info = dev->drw_info[id];
+
+ if (!info) {
+ info = drm_calloc(1, sizeof(drm_drawable_info_t), DRM_MEM_BUFS);
+
+ if (!info) {
+ DRM_ERROR("Failed to allocate drawable info memory\n");
+ return DRM_ERR(ENOMEM);
+ }
+ }
+
+ switch (update.type) {
+ case DRM_DRAWABLE_CLIPRECTS:
+ if (update.num != info->num_rects) {
+ rects = drm_alloc(update.num * sizeof(drm_clip_rect_t),
+ DRM_MEM_BUFS);
+ } else
+ rects = info->rects;
+
+ if (update.num && !rects) {
+ DRM_ERROR("Failed to allocate cliprect memory\n");
+ err = DRM_ERR(ENOMEM);
+ goto error;
+ }
+
+ if (update.num && DRM_COPY_FROM_USER(rects,
+ (drm_clip_rect_t __user *)
+ (unsigned long)update.data,
+ update.num *
+ sizeof(*rects))) {
+ DRM_ERROR("Failed to copy cliprects from userspace\n");
+ err = DRM_ERR(EFAULT);
+ goto error;
+ }
+
+ spin_lock_irqsave(&dev->drw_lock, irqflags);
+
+ if (rects != info->rects) {
+ drm_free(info->rects, info->num_rects *
+ sizeof(drm_clip_rect_t), DRM_MEM_BUFS);
+ }
+
+ info->rects = rects;
+ info->num_rects = update.num;
+ dev->drw_info[id] = info;
+
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+
+ DRM_DEBUG("Updated %d cliprects for drawable %d\n",
+ info->num_rects, id);
+ break;
+ default:
+ DRM_ERROR("Invalid update type %d\n", update.type);
+ return DRM_ERR(EINVAL);
+ }
+
+ return 0;
+
+error:
+ if (!dev->drw_info[id])
+ drm_free(info, sizeof(*info), DRM_MEM_BUFS);
+ else if (rects != dev->drw_info[id]->rects)
+ drm_free(rects, update.num *
+ sizeof(drm_clip_rect_t), DRM_MEM_BUFS);
+
+ return err;
+}
+
+/**
+ * Caller must hold the drawable spinlock!
+ */
+drm_drawable_info_t *drm_get_drawable_info(drm_device_t *dev, drm_drawable_t id) {
+ u32 *bitfield = dev->drw_bitfield;
+ unsigned int idx, shift;
+
+ id--;
+ idx = id / (8 * sizeof(*bitfield));
+ shift = id % (8 * sizeof(*bitfield));
+
+ if (idx < 0 || idx >= dev->drw_bitfield_length ||
+ !(bitfield[idx] & (1 << shift))) {
+ DRM_DEBUG("No such drawable %d\n", id);
+ return NULL;
+ }
+
+ return dev->drw_info[id];
}
+EXPORT_SYMBOL(drm_get_drawable_info);
[DRM_IOCTL_NR(DRM_IOCTL_SG_FREE)] = {drm_sg_free, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
[DRM_IOCTL_NR(DRM_IOCTL_WAIT_VBLANK)] = {drm_wait_vblank, 0},
+
+ [DRM_IOCTL_NR(DRM_IOCTL_UPDATE_DRAW)] = {drm_update_drawable_info, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
};
#define DRIVER_IOCTL_COUNT ARRAY_SIZE( drm_ioctls )
if (dev->irq_enabled)
drm_irq_uninstall(dev);
+ /* Free drawable information memory */
+ for (i = 0; i < dev->drw_bitfield_length / sizeof(*dev->drw_bitfield);
+ i++) {
+ drm_drawable_info_t *info = drm_get_drawable_info(dev, i);
+
+ if (info) {
+ drm_free(info->rects, info->num_rects *
+ sizeof(drm_clip_rect_t), DRM_MEM_BUFS);
+ drm_free(info, sizeof(*info), DRM_MEM_BUFS);
+ }
+ }
+
mutex_lock(&dev->struct_mutex);
del_timer(&dev->timer);
&version->desc))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_VERSION, (unsigned long)version);
if (err)
return err;
&u->unique))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_GET_UNIQUE, (unsigned long)u);
if (err)
return err;
&u->unique))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_SET_UNIQUE, (unsigned long)u);
}
if (__put_user(idx, &map->offset))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_GET_MAP, (unsigned long)map);
if (err)
return err;
|| __put_user(m32.flags, &map->flags))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_ADD_MAP, (unsigned long)map);
if (err)
return err;
if (__put_user((void *)(unsigned long)handle, &map->handle))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RM_MAP, (unsigned long)map);
}
if (__put_user(idx, &client->idx))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_GET_CLIENT, (unsigned long)client);
if (err)
return err;
if (!access_ok(VERIFY_WRITE, stats, sizeof(*stats)))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_GET_STATS, (unsigned long)stats);
if (err)
return err;
|| __put_user(agp_start, &buf->agp_start))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_ADD_BUFS, (unsigned long)buf);
if (err)
return err;
|| __put_user(b32.high_mark, &buf->high_mark))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_MARK_BUFS, (unsigned long)buf);
}
|| __put_user(list, &request->list))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_INFO_BUFS, (unsigned long)request);
if (err)
return err;
|| __put_user(list, &request->list))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_MAP_BUFS, (unsigned long)request);
if (err)
return err;
&request->list))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_FREE_BUFS, (unsigned long)request);
}
&request->handle))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_SET_SAREA_CTX, (unsigned long)request);
}
if (__put_user(ctx_id, &request->ctx_id))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_GET_SAREA_CTX, (unsigned long)request);
if (err)
return err;
&res->contexts))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RES_CTX, (unsigned long)res);
if (err)
return err;
&d->request_sizes))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_DMA, (unsigned long)d);
if (err)
return err;
if (put_user(m32.mode, &mode->mode))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_AGP_ENABLE, (unsigned long)mode);
}
if (!access_ok(VERIFY_WRITE, info, sizeof(*info)))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_AGP_INFO, (unsigned long)info);
if (err)
return err;
|| __put_user(req32.type, &request->type))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_AGP_ALLOC, (unsigned long)request);
if (err)
return err;
if (__get_user(req32.handle, &request->handle)
|| __get_user(req32.physical, &request->physical)
|| copy_to_user(argp, &req32, sizeof(req32))) {
- drm_ioctl(file->f_dentry->d_inode, file,
+ drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_AGP_FREE, (unsigned long)request);
return -EFAULT;
}
|| __put_user(handle, &request->handle))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_AGP_FREE, (unsigned long)request);
}
|| __put_user(req32.offset, &request->offset))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_AGP_BIND, (unsigned long)request);
}
|| __put_user(handle, &request->handle))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_AGP_UNBIND, (unsigned long)request);
}
#endif /* __OS_HAS_AGP */
|| __put_user(x, &request->size))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_SG_ALLOC, (unsigned long)request);
if (err)
return err;
|| __put_user(x << PAGE_SHIFT, &request->handle))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_SG_FREE, (unsigned long)request);
}
|| __put_user(req32.request.signal, &request->request.signal))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_WAIT_VBLANK, (unsigned long)request);
if (err)
return err;
if (fn != NULL)
ret = (*fn) (filp, cmd, arg);
else
- ret = drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
+ ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg);
unlock_kernel();
return ret;
spin_lock_init(&dev->vbl_lock);
INIT_LIST_HEAD(&dev->vbl_sigs.head);
+ INIT_LIST_HEAD(&dev->vbl_sigs2.head);
dev->vbl_pending = 0;
}
free_irq(dev->irq, dev);
+ dev->locked_tasklet_func = NULL;
+
return 0;
}
drm_wait_vblank_t vblwait;
struct timeval now;
int ret = 0;
- unsigned int flags;
-
- if (!drm_core_check_feature(dev, DRIVER_IRQ_VBL))
- return -EINVAL;
+ unsigned int flags, seq;
if (!dev->irq)
return -EINVAL;
if (copy_from_user(&vblwait, argp, sizeof(vblwait)))
return -EFAULT;
- switch (vblwait.request.type & ~_DRM_VBLANK_FLAGS_MASK) {
+ if (vblwait.request.type &
+ ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) {
+ DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n",
+ vblwait.request.type,
+ (_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK));
+ return -EINVAL;
+ }
+
+ flags = vblwait.request.type & _DRM_VBLANK_FLAGS_MASK;
+
+ if (!drm_core_check_feature(dev, (flags & _DRM_VBLANK_SECONDARY) ?
+ DRIVER_IRQ_VBL2 : DRIVER_IRQ_VBL))
+ return -EINVAL;
+
+ seq = atomic_read((flags & _DRM_VBLANK_SECONDARY) ? &dev->vbl_received2
+ : &dev->vbl_received);
+
+ switch (vblwait.request.type & _DRM_VBLANK_TYPES_MASK) {
case _DRM_VBLANK_RELATIVE:
- vblwait.request.sequence += atomic_read(&dev->vbl_received);
+ vblwait.request.sequence += seq;
vblwait.request.type &= ~_DRM_VBLANK_RELATIVE;
case _DRM_VBLANK_ABSOLUTE:
break;
return -EINVAL;
}
- flags = vblwait.request.type & _DRM_VBLANK_FLAGS_MASK;
+ if ((flags & _DRM_VBLANK_NEXTONMISS) &&
+ (seq - vblwait.request.sequence) <= (1<<23)) {
+ vblwait.request.sequence = seq + 1;
+ }
if (flags & _DRM_VBLANK_SIGNAL) {
unsigned long irqflags;
+ drm_vbl_sig_t *vbl_sigs = (flags & _DRM_VBLANK_SECONDARY)
+ ? &dev->vbl_sigs2 : &dev->vbl_sigs;
drm_vbl_sig_t *vbl_sig;
- vblwait.reply.sequence = atomic_read(&dev->vbl_received);
-
spin_lock_irqsave(&dev->vbl_lock, irqflags);
/* Check if this task has already scheduled the same signal
* for the same vblank sequence number; nothing to be done in
* that case
*/
- list_for_each_entry(vbl_sig, &dev->vbl_sigs.head, head) {
+ list_for_each_entry(vbl_sig, &vbl_sigs->head, head) {
if (vbl_sig->sequence == vblwait.request.sequence
&& vbl_sig->info.si_signo == vblwait.request.signal
&& vbl_sig->task == current) {
spin_unlock_irqrestore(&dev->vbl_lock,
irqflags);
+ vblwait.reply.sequence = seq;
goto done;
}
}
spin_lock_irqsave(&dev->vbl_lock, irqflags);
- list_add_tail((struct list_head *)vbl_sig, &dev->vbl_sigs.head);
+ list_add_tail((struct list_head *)vbl_sig, &vbl_sigs->head);
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+
+ vblwait.reply.sequence = seq;
} else {
- if (dev->driver->vblank_wait)
+ if (flags & _DRM_VBLANK_SECONDARY) {
+ if (dev->driver->vblank_wait2)
+ ret = dev->driver->vblank_wait2(dev, &vblwait.request.sequence);
+ } else if (dev->driver->vblank_wait)
ret =
dev->driver->vblank_wait(dev,
&vblwait.request.sequence);
*/
void drm_vbl_send_signals(drm_device_t * dev)
{
- struct list_head *list, *tmp;
- drm_vbl_sig_t *vbl_sig;
- unsigned int vbl_seq = atomic_read(&dev->vbl_received);
unsigned long flags;
+ int i;
spin_lock_irqsave(&dev->vbl_lock, flags);
- list_for_each_safe(list, tmp, &dev->vbl_sigs.head) {
- vbl_sig = list_entry(list, drm_vbl_sig_t, head);
- if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
- vbl_sig->info.si_code = vbl_seq;
- send_sig_info(vbl_sig->info.si_signo, &vbl_sig->info,
- vbl_sig->task);
+ for (i = 0; i < 2; i++) {
+ struct list_head *list, *tmp;
+ drm_vbl_sig_t *vbl_sig;
+ drm_vbl_sig_t *vbl_sigs = i ? &dev->vbl_sigs2 : &dev->vbl_sigs;
+ unsigned int vbl_seq = atomic_read(i ? &dev->vbl_received2 :
+ &dev->vbl_received);
+
+ list_for_each_safe(list, tmp, &vbl_sigs->head) {
+ vbl_sig = list_entry(list, drm_vbl_sig_t, head);
+ if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
+ vbl_sig->info.si_code = vbl_seq;
+ send_sig_info(vbl_sig->info.si_signo,
+ &vbl_sig->info, vbl_sig->task);
- list_del(list);
+ list_del(list);
- drm_free(vbl_sig, sizeof(*vbl_sig), DRM_MEM_DRIVER);
+ drm_free(vbl_sig, sizeof(*vbl_sig),
+ DRM_MEM_DRIVER);
- dev->vbl_pending--;
+ dev->vbl_pending--;
+ }
}
}
}
EXPORT_SYMBOL(drm_vbl_send_signals);
+
+/**
+ * Tasklet wrapper function.
+ *
+ * \param data DRM device in disguise.
+ *
+ * Attempts to grab the HW lock and calls the driver callback on success. On
+ * failure, leave the lock marked as contended so the callback can be called
+ * from drm_unlock().
+ */
+static void drm_locked_tasklet_func(unsigned long data)
+{
+ drm_device_t *dev = (drm_device_t*)data;
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+
+ if (!dev->locked_tasklet_func ||
+ !drm_lock_take(&dev->lock.hw_lock->lock,
+ DRM_KERNEL_CONTEXT)) {
+ spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+ return;
+ }
+
+ dev->lock.lock_time = jiffies;
+ atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
+
+ dev->locked_tasklet_func(dev);
+
+ drm_lock_free(dev, &dev->lock.hw_lock->lock,
+ DRM_KERNEL_CONTEXT);
+
+ dev->locked_tasklet_func = NULL;
+
+ spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+}
+
+/**
+ * Schedule a tasklet to call back a driver hook with the HW lock held.
+ *
+ * \param dev DRM device.
+ * \param func Driver callback.
+ *
+ * This is intended for triggering actions that require the HW lock from an
+ * interrupt handler. The lock will be grabbed ASAP after the interrupt handler
+ * completes. Note that the callback may be called from interrupt or process
+ * context, it must not make any assumptions about this. Also, the HW lock will
+ * be held with the kernel context or any client context.
+ */
+void drm_locked_tasklet(drm_device_t *dev, void (*func)(drm_device_t*))
+{
+ unsigned long irqflags;
+ static DECLARE_TASKLET(drm_tasklet, drm_locked_tasklet_func, 0);
+
+ if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ) ||
+ test_bit(TASKLET_STATE_SCHED, &drm_tasklet.state))
+ return;
+
+ spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+
+ if (dev->locked_tasklet_func) {
+ spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+ return;
+ }
+
+ dev->locked_tasklet_func = func;
+
+ spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+
+ drm_tasklet.data = (unsigned long)dev;
+
+ tasklet_hi_schedule(&drm_tasklet);
+}
+EXPORT_SYMBOL(drm_locked_tasklet);
drm_file_t *priv = filp->private_data;
drm_device_t *dev = priv->head->dev;
drm_lock_t lock;
+ unsigned long irqflags;
if (copy_from_user(&lock, (drm_lock_t __user *) arg, sizeof(lock)))
return -EFAULT;
return -EINVAL;
}
+ spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+
+ if (dev->locked_tasklet_func) {
+ dev->locked_tasklet_func(dev);
+
+ dev->locked_tasklet_func = NULL;
+ }
+
+ spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+
atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]);
/* kernel_context_switch isn't used by any of the x86 drm
int retcode;
spin_lock_init(&dev->count_lock);
+ spin_lock_init(&dev->drw_lock);
+ spin_lock_init(&dev->tasklet_lock);
init_timer(&dev->timer);
mutex_init(&dev->struct_mutex);
mutex_init(&dev->ctxlist_mutex);
}
unlock_kernel();
+ if (!capable(CAP_SYS_ADMIN) &&
+ (dma->flags & _DRM_DMA_USE_PCI_RO)) {
+ vma->vm_flags &= ~(VM_WRITE | VM_MAYWRITE);
+#if defined(__i386__) || defined(__x86_64__)
+ pgprot_val(vma->vm_page_prot) &= ~_PAGE_RW;
+#else
+ /* Ye gads this is ugly. With more thought
+ we could move this up higher and use
+ `protection_map' instead. */
+ vma->vm_page_prot =
+ __pgprot(pte_val
+ (pte_wrprotect
+ (__pte(pgprot_val(vma->vm_page_prot)))));
+#endif
+ }
+
vma->vm_ops = &drm_vm_dma_ops;
vma->vm_flags |= VM_RESERVED; /* Don't swap */
dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
+ dev_priv->cpp = init->cpp;
dev_priv->back_offset = init->back_offset;
dev_priv->front_offset = init->front_offset;
dev_priv->current_page = 0;
[DRM_IOCTL_NR(DRM_I915_DESTROY_HEAP)] = { i915_mem_destroy_heap, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY },
[DRM_IOCTL_NR(DRM_I915_SET_VBLANK_PIPE)] = { i915_vblank_pipe_set, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY },
[DRM_IOCTL_NR(DRM_I915_GET_VBLANK_PIPE)] = { i915_vblank_pipe_get, DRM_AUTH },
+ [DRM_IOCTL_NR(DRM_I915_VBLANK_SWAP)] = {i915_vblank_swap, DRM_AUTH},
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
unsigned int depth_tiled;
unsigned int rotated_tiled;
unsigned int rotated2_tiled;
+
+ int pipeA_x;
+ int pipeA_y;
+ int pipeA_w;
+ int pipeA_h;
+ int pipeB_x;
+ int pipeB_y;
+ int pipeB_w;
+ int pipeB_h;
} drm_i915_sarea_t;
/* Flags for perf_boxes
#define DRM_I915_DESTROY_HEAP 0x0c
#define DRM_I915_SET_VBLANK_PIPE 0x0d
#define DRM_I915_GET_VBLANK_PIPE 0x0e
+#define DRM_I915_VBLANK_SWAP 0x0f
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
#define DRM_IOCTL_I915_DESTROY_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t)
#define DRM_IOCTL_I915_SET_VBLANK_PIPE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
#define DRM_IOCTL_I915_GET_VBLANK_PIPE DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
int pipe;
} drm_i915_vblank_pipe_t;
+/* Schedule buffer swap at given vertical blank:
+ */
+typedef struct drm_i915_vblank_swap {
+ drm_drawable_t drawable;
+ drm_vblank_seq_type_t seqtype;
+ unsigned int sequence;
+} drm_i915_vblank_swap_t;
+
#endif /* _I915_DRM_H_ */
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
- DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL,
+ DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL |
+ DRIVER_IRQ_VBL2,
.load = i915_driver_load,
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.device_is_agp = i915_driver_device_is_agp,
.vblank_wait = i915_driver_vblank_wait,
+ .vblank_wait2 = i915_driver_vblank_wait2,
.irq_preinstall = i915_driver_irq_preinstall,
.irq_postinstall = i915_driver_irq_postinstall,
.irq_uninstall = i915_driver_irq_uninstall,
* 1.3: Add vblank support
* 1.4: Fix cmdbuffer path, add heap destroy
* 1.5: Add vblank pipe configuration
+ * 1.6: - New ioctl for scheduling buffer swaps on vertical blank
+ * - Support vertical blank on secondary display pipe
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 5
+#define DRIVER_MINOR 6
#define DRIVER_PATCHLEVEL 0
typedef struct _drm_i915_ring_buffer {
DRMFILE filp; /* 0: free, -1: heap, other: real files */
};
+typedef struct _drm_i915_vbl_swap {
+ struct list_head head;
+ drm_drawable_t drw_id;
+ unsigned int pipe;
+ unsigned int sequence;
+} drm_i915_vbl_swap_t;
+
typedef struct drm_i915_private {
drm_local_map_t *sarea;
drm_local_map_t *mmio_map;
dma_addr_t dma_status_page;
unsigned long counter;
+ unsigned int cpp;
int back_offset;
int front_offset;
int current_page;
struct mem_block *agp_heap;
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int vblank_pipe;
+
+ spinlock_t swaps_lock;
+ drm_i915_vbl_swap_t vbl_swaps;
+ unsigned int swaps_pending;
} drm_i915_private_t;
extern drm_ioctl_desc_t i915_ioctls[];
extern int i915_irq_wait(DRM_IOCTL_ARGS);
extern int i915_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence);
+extern int i915_driver_vblank_wait2(drm_device_t *dev, unsigned int *sequence);
extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
extern void i915_driver_irq_preinstall(drm_device_t * dev);
extern void i915_driver_irq_postinstall(drm_device_t * dev);
extern void i915_driver_irq_uninstall(drm_device_t * dev);
extern int i915_vblank_pipe_set(DRM_IOCTL_ARGS);
extern int i915_vblank_pipe_get(DRM_IOCTL_ARGS);
+extern int i915_vblank_swap(DRM_IOCTL_ARGS);
/* i915_mem.c */
extern int i915_mem_alloc(DRM_IOCTL_ARGS);
#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2)
+#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6)
+#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21)
+#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20)
+
#define MI_BATCH_BUFFER ((0x30<<23)|1)
#define MI_BATCH_BUFFER_START (0x31<<23)
#define MI_BATCH_BUFFER_END (0xA<<23)
&batchbuffer->cliprects))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_I915_BATCHBUFFER,
(unsigned long)batchbuffer);
}
&cmdbuffer->cliprects))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_I915_CMDBUFFER, (unsigned long)cmdbuffer);
}
&request->irq_seq))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_I915_IRQ_EMIT, (unsigned long)request);
}
typedef struct drm_i915_getparam32 {
&request->value))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_I915_GETPARAM, (unsigned long)request);
}
&request->region_offset))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_I915_ALLOC, (unsigned long)request);
}
if (fn != NULL)
ret = (*fn) (filp, cmd, arg);
else
- ret = drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
+ ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg);
unlock_kernel();
return ret;
#define MAX_NOPID ((u32)~0)
+/**
+ * Emit blits for scheduled buffer swaps.
+ *
+ * This function will be called with the HW lock held.
+ */
+static void i915_vblank_tasklet(drm_device_t *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ unsigned long irqflags;
+ struct list_head *list, *tmp;
+
+ DRM_DEBUG("\n");
+
+ spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
+
+ list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
+ drm_i915_vbl_swap_t *vbl_swap =
+ list_entry(list, drm_i915_vbl_swap_t, head);
+ atomic_t *counter = vbl_swap->pipe ? &dev->vbl_received2 :
+ &dev->vbl_received;
+
+ if ((atomic_read(counter) - vbl_swap->sequence) <= (1<<23)) {
+ drm_drawable_info_t *drw;
+
+ spin_unlock(&dev_priv->swaps_lock);
+
+ spin_lock(&dev->drw_lock);
+
+ drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
+
+ if (drw) {
+ int i, num_rects = drw->num_rects;
+ drm_clip_rect_t *rect = drw->rects;
+ drm_i915_sarea_t *sarea_priv =
+ dev_priv->sarea_priv;
+ u32 cpp = dev_priv->cpp;
+ u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
+ XY_SRC_COPY_BLT_WRITE_ALPHA |
+ XY_SRC_COPY_BLT_WRITE_RGB)
+ : XY_SRC_COPY_BLT_CMD;
+ u32 pitchropcpp = (sarea_priv->pitch * cpp) |
+ (0xcc << 16) | (cpp << 23) |
+ (1 << 24);
+ RING_LOCALS;
+
+ i915_kernel_lost_context(dev);
+
+ BEGIN_LP_RING(6);
+
+ OUT_RING(GFX_OP_DRAWRECT_INFO);
+ OUT_RING(0);
+ OUT_RING(0);
+ OUT_RING(sarea_priv->width |
+ sarea_priv->height << 16);
+ OUT_RING(sarea_priv->width |
+ sarea_priv->height << 16);
+ OUT_RING(0);
+
+ ADVANCE_LP_RING();
+
+ sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
+
+ for (i = 0; i < num_rects; i++, rect++) {
+ BEGIN_LP_RING(8);
+
+ OUT_RING(cmd);
+ OUT_RING(pitchropcpp);
+ OUT_RING((rect->y1 << 16) | rect->x1);
+ OUT_RING((rect->y2 << 16) | rect->x2);
+ OUT_RING(sarea_priv->front_offset);
+ OUT_RING((rect->y1 << 16) | rect->x1);
+ OUT_RING(pitchropcpp & 0xffff);
+ OUT_RING(sarea_priv->back_offset);
+
+ ADVANCE_LP_RING();
+ }
+ }
+
+ spin_unlock(&dev->drw_lock);
+
+ spin_lock(&dev_priv->swaps_lock);
+
+ list_del(list);
+
+ drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
+
+ dev_priv->swaps_pending--;
+ }
+ }
+
+ spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+}
+
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
drm_device_t *dev = (drm_device_t *) arg;
DRM_WAKEUP(&dev_priv->irq_queue);
if (temp & (VSYNC_PIPEA_FLAG | VSYNC_PIPEB_FLAG)) {
- atomic_inc(&dev->vbl_received);
+ int vblank_pipe = dev_priv->vblank_pipe;
+
+ if ((vblank_pipe &
+ (DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B))
+ == (DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B)) {
+ if (temp & VSYNC_PIPEA_FLAG)
+ atomic_inc(&dev->vbl_received);
+ if (temp & VSYNC_PIPEB_FLAG)
+ atomic_inc(&dev->vbl_received2);
+ } else if (((temp & VSYNC_PIPEA_FLAG) &&
+ (vblank_pipe & DRM_I915_VBLANK_PIPE_A)) ||
+ ((temp & VSYNC_PIPEB_FLAG) &&
+ (vblank_pipe & DRM_I915_VBLANK_PIPE_B)))
+ atomic_inc(&dev->vbl_received);
+
DRM_WAKEUP(&dev->vbl_queue);
drm_vbl_send_signals(dev);
+
+ if (dev_priv->swaps_pending > 0)
+ drm_locked_tasklet(dev, i915_vblank_tasklet);
}
return IRQ_HANDLED;
return ret;
}
-int i915_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence)
+static int i915_driver_vblank_do_wait(drm_device_t *dev, unsigned int *sequence,
+ atomic_t *counter)
{
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned int cur_vblank;
}
DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
- (((cur_vblank = atomic_read(&dev->vbl_received))
+ (((cur_vblank = atomic_read(counter))
- *sequence) <= (1<<23)));
*sequence = cur_vblank;
}
+int i915_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence)
+{
+ return i915_driver_vblank_do_wait(dev, sequence, &dev->vbl_received);
+}
+
+int i915_driver_vblank_wait2(drm_device_t *dev, unsigned int *sequence)
+{
+ return i915_driver_vblank_do_wait(dev, sequence, &dev->vbl_received2);
+}
+
/* Needs the lock as it touches the ring.
*/
int i915_irq_emit(DRM_IOCTL_ARGS)
return i915_wait_irq(dev, irqwait.irq_seq);
}
-static int i915_enable_interrupt (drm_device_t *dev)
+static void i915_enable_interrupt (drm_device_t *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u16 flag;
flag |= VSYNC_PIPEA_FLAG;
if (dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B)
flag |= VSYNC_PIPEB_FLAG;
- if (dev_priv->vblank_pipe & ~(DRM_I915_VBLANK_PIPE_A|DRM_I915_VBLANK_PIPE_B)) {
- DRM_ERROR("%s called with invalid pipe 0x%x\n",
- __FUNCTION__, dev_priv->vblank_pipe);
- return DRM_ERR(EINVAL);
- }
+
I915_WRITE16(I915REG_INT_ENABLE_R, USER_INT_FLAG | flag);
- return 0;
}
/* Set the vblank monitor pipe
DRM_COPY_FROM_USER_IOCTL(pipe, (drm_i915_vblank_pipe_t __user *) data,
sizeof(pipe));
+ if (pipe.pipe & ~(DRM_I915_VBLANK_PIPE_A|DRM_I915_VBLANK_PIPE_B)) {
+ DRM_ERROR("%s called with invalid pipe 0x%x\n",
+ __FUNCTION__, pipe.pipe);
+ return DRM_ERR(EINVAL);
+ }
+
dev_priv->vblank_pipe = pipe.pipe;
- return i915_enable_interrupt (dev);
+
+ i915_enable_interrupt (dev);
+
+ return 0;
}
int i915_vblank_pipe_get(DRM_IOCTL_ARGS)
return 0;
}
+/**
+ * Schedule buffer swap at given vertical blank.
+ */
+int i915_vblank_swap(DRM_IOCTL_ARGS)
+{
+ DRM_DEVICE;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ drm_i915_vblank_swap_t swap;
+ drm_i915_vbl_swap_t *vbl_swap;
+ unsigned int pipe, seqtype, curseq;
+ unsigned long irqflags;
+ struct list_head *list;
+
+ if (!dev_priv) {
+ DRM_ERROR("%s called with no initialization\n", __func__);
+ return DRM_ERR(EINVAL);
+ }
+
+ if (dev_priv->sarea_priv->rotation) {
+ DRM_DEBUG("Rotation not supported\n");
+ return DRM_ERR(EINVAL);
+ }
+
+ DRM_COPY_FROM_USER_IOCTL(swap, (drm_i915_vblank_swap_t __user *) data,
+ sizeof(swap));
+
+ if (swap.seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE |
+ _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) {
+ DRM_ERROR("Invalid sequence type 0x%x\n", swap.seqtype);
+ return DRM_ERR(EINVAL);
+ }
+
+ pipe = (swap.seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
+
+ seqtype = swap.seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE);
+
+ if (!(dev_priv->vblank_pipe & (1 << pipe))) {
+ DRM_ERROR("Invalid pipe %d\n", pipe);
+ return DRM_ERR(EINVAL);
+ }
+
+ spin_lock_irqsave(&dev->drw_lock, irqflags);
+
+ if (!drm_get_drawable_info(dev, swap.drawable)) {
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+ DRM_ERROR("Invalid drawable ID %d\n", swap.drawable);
+ return DRM_ERR(EINVAL);
+ }
+
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
+
+ curseq = atomic_read(pipe ? &dev->vbl_received2 : &dev->vbl_received);
+
+ if (seqtype == _DRM_VBLANK_RELATIVE)
+ swap.sequence += curseq;
+
+ if ((curseq - swap.sequence) <= (1<<23)) {
+ if (swap.seqtype & _DRM_VBLANK_NEXTONMISS) {
+ swap.sequence = curseq + 1;
+ } else {
+ DRM_DEBUG("Missed target sequence\n");
+ return DRM_ERR(EINVAL);
+ }
+ }
+
+ spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
+
+ list_for_each(list, &dev_priv->vbl_swaps.head) {
+ vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head);
+
+ if (vbl_swap->drw_id == swap.drawable &&
+ vbl_swap->pipe == pipe &&
+ vbl_swap->sequence == swap.sequence) {
+ spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+ DRM_DEBUG("Already scheduled\n");
+ return 0;
+ }
+ }
+
+ spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+
+ if (dev_priv->swaps_pending >= 100) {
+ DRM_DEBUG("Too many swaps queued\n");
+ return DRM_ERR(EBUSY);
+ }
+
+ vbl_swap = drm_calloc(1, sizeof(vbl_swap), DRM_MEM_DRIVER);
+
+ if (!vbl_swap) {
+ DRM_ERROR("Failed to allocate memory to queue swap\n");
+ return DRM_ERR(ENOMEM);
+ }
+
+ DRM_DEBUG("\n");
+
+ vbl_swap->drw_id = swap.drawable;
+ vbl_swap->pipe = pipe;
+ vbl_swap->sequence = swap.sequence;
+
+ spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
+
+ list_add_tail((struct list_head *)vbl_swap, &dev_priv->vbl_swaps.head);
+ dev_priv->swaps_pending++;
+
+ spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
+
+ DRM_COPY_TO_USER_IOCTL((drm_i915_vblank_swap_t __user *) data, swap,
+ sizeof(swap));
+
+ return 0;
+}
+
/* drm_dma.h hooks
*/
void i915_driver_irq_preinstall(drm_device_t * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ dev_priv->swaps_lock = SPIN_LOCK_UNLOCKED;
+ INIT_LIST_HEAD(&dev_priv->vbl_swaps.head);
+ dev_priv->swaps_pending = 0;
+
+ if (!dev_priv->vblank_pipe)
+ dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A;
i915_enable_interrupt(dev);
DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
}
if (err)
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_MGA_INIT, (unsigned long)init);
}
&getparam->value))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_MGA_GETPARAM, (unsigned long)getparam);
}
|| __put_user(dma_bootstrap32.agp_size, &dma_bootstrap->agp_size))
return -EFAULT;
- err = drm_ioctl(file->f_dentry->d_inode, file,
+ err = drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_MGA_DMA_BOOTSTRAP,
(unsigned long)dma_bootstrap);
if (err)
if (fn != NULL)
ret = (*fn) (filp, cmd, arg);
else
- ret = drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
+ ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg);
unlock_kernel();
return ret;
&init->agp_textures_offset))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_R128_INIT, (unsigned long)init);
}
&depth->mask))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_R128_DEPTH, (unsigned long)depth);
}
&stipple->mask))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_R128_STIPPLE, (unsigned long)stipple);
}
&getparam->value))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_R128_GETPARAM, (unsigned long)getparam);
}
if (fn != NULL)
ret = (*fn) (filp, cmd, arg);
else
- ret = drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
+ ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg);
unlock_kernel();
return ret;
&init->gart_textures_offset))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RADEON_CP_INIT, (unsigned long)init);
}
&clr->depth_boxes))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RADEON_CLEAR, (unsigned long)clr);
}
&request->mask))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RADEON_STIPPLE, (unsigned long)request);
}
&image->data))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RADEON_TEXTURE, (unsigned long)request);
}
&request->prim))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RADEON_VERTEX2, (unsigned long)request);
}
&request->boxes))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RADEON_CMDBUF, (unsigned long)request);
}
&request->value))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RADEON_GETPARAM, (unsigned long)request);
}
&request->region_offset))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RADEON_ALLOC, (unsigned long)request);
}
&request->irq_seq))
return -EFAULT;
- return drm_ioctl(file->f_dentry->d_inode, file,
+ return drm_ioctl(file->f_path.dentry->d_inode, file,
DRM_IOCTL_RADEON_IRQ_EMIT, (unsigned long)request);
}
if (fn != NULL)
ret = (*fn) (filp, cmd, arg);
else
- ret = drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
+ ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg);
unlock_kernel();
return ret;
static ssize_t dsp56k_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int dev = iminor(inode) & 0x0f;
switch(dev)
static ssize_t dsp56k_write(struct file *file, const char __user *buf, size_t count,
loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int dev = iminor(inode) & 0x0f;
switch(dev)
#if 0
static unsigned int dsp56k_poll(struct file *file, poll_table *wait)
{
- int dev = iminor(file->f_dentry->d_inode) & 0x0f;
+ int dev = iminor(file->f_path.dentry->d_inode) & 0x0f;
switch(dev)
{
static ssize_t dtlk_read(struct file *file, char __user *buf,
size_t count, loff_t * ppos)
{
- unsigned int minor = iminor(file->f_dentry->d_inode);
+ unsigned int minor = iminor(file->f_path.dentry->d_inode);
char ch;
int i = 0, retries;
}
#endif
- if (iminor(file->f_dentry->d_inode) != DTLK_MINOR)
+ if (iminor(file->f_path.dentry->d_inode) != DTLK_MINOR)
return -EINVAL;
while (1) {
unsigned int, unsigned long);
static int info_ioctl(struct tty_struct *, struct file *,
unsigned int, unsigned long);
-static void pc_set_termios(struct tty_struct *, struct termios *);
+static void pc_set_termios(struct tty_struct *, struct ktermios *);
static void do_softint(struct work_struct *work);
static void pc_stop(struct tty_struct *);
static void pc_start(struct tty_struct *);
pc_driver->init_termios.c_oflag = 0;
pc_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
pc_driver->init_termios.c_lflag = 0;
+ pc_driver->init_termios.c_ispeed = 9600;
+ pc_driver->init_termios.c_ospeed = 9600;
pc_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(pc_driver, &pc_ops);
pc_info->init_termios.c_oflag = 0;
pc_info->init_termios.c_lflag = 0;
pc_info->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
+ pc_info->init_termios.c_ispeed = 9600;
+ pc_info->init_termios.c_ospeed = 9600;
pc_info->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(pc_info, &info_ops);
{ /* Begin epcaparam */
unsigned int cmdHead;
- struct termios *ts;
+ struct ktermios *ts;
struct board_chan __iomem *bc;
unsigned mval, hflow, cflag, iflag;
{ /* Begin receive_data */
unchar *rptr;
- struct termios *ts = NULL;
+ struct ktermios *ts = NULL;
struct tty_struct *tty;
struct board_chan __iomem *bc;
int dataToRead, wrapgap, bytesAvailable;
switch (cmd)
{ /* Begin switch cmd */
+#if 0 /* Handled by calling layer properly */
case TCGETS:
- if (copy_to_user(argp, tty->termios, sizeof(struct termios)))
+ if (copy_to_user(argp, tty->termios, sizeof(struct ktermios)))
return -EFAULT;
return 0;
case TCGETA:
return get_termio(tty, argp);
+#endif
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
if (retval)
/* --------------------- Begin pc_set_termios ----------------------- */
-static void pc_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{ /* Begin pc_set_termios */
struct channel *ch;
return 0;
}
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct esp_struct *info = (struct esp_struct *)tty->driver_data;
unsigned long flags;
void gs_set_termios (struct tty_struct * tty,
- struct termios * old_termios)
+ struct ktermios * old_termios)
{
struct gs_port *port;
int baudrate, tmp, rv;
- struct termios *tiosp;
+ struct ktermios *tiosp;
func_enter();
* that will cause echoing or we'll go into recursive loop echoing chars back
* and forth with the console drivers.
*/
-static struct termios hvcs_tty_termios = {
+static struct ktermios hvcs_tty_termios = {
.c_iflag = IGNBRK | IGNPAR,
.c_oflag = OPOST,
.c_cflag = B38400 | CS8 | CREAD | HUPCL,
- .c_cc = INIT_C_CC
+ .c_cc = INIT_C_CC,
+ .c_ispeed = 38400,
+ .c_ospeed = 38400
};
/*
hvsi_driver->type = TTY_DRIVER_TYPE_SYSTEM;
hvsi_driver->init_termios = tty_std_termios;
hvsi_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
+ hvsi_driver->init_termios.c_ispeed = 9600;
+ hvsi_driver->init_termios.c_ospeed = 9600;
hvsi_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(hvsi_driver, &hvsi_ops);
static int ip2_chars_in_buf(PTTY);
static void ip2_flush_buffer(PTTY);
static int ip2_ioctl(PTTY, struct file *, UINT, ULONG);
-static void ip2_set_termios(PTTY, struct termios *);
+static void ip2_set_termios(PTTY, struct ktermios *);
static void ip2_set_line_discipline(PTTY);
static void ip2_throttle(PTTY);
static void ip2_unthrottle(PTTY);
static void ip2_wait_until_sent(PTTY,int);
-static void set_params (i2ChanStrPtr, struct termios *);
+static void set_params (i2ChanStrPtr, struct ktermios *);
static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *);
static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
/* */
/******************************************************************************/
static void
-ip2_set_termios( PTTY tty, struct termios *old_termios )
+ip2_set_termios( PTTY tty, struct ktermios *old_termios )
{
i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data;
/* change. */
/******************************************************************************/
static void
-set_params( i2ChanStrPtr pCh, struct termios *o_tios )
+set_params( i2ChanStrPtr pCh, struct ktermios *o_tios )
{
tcflag_t cflag, iflag, lflag;
char stop_char, start_char;
- struct termios dummy;
+ struct ktermios dummy;
lflag = pCh->pTTY->termios->c_lflag;
cflag = pCh->pTTY->termios->c_cflag;
ssize_t
ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off )
{
- unsigned int minor = iminor(pFile->f_dentry->d_inode);
+ unsigned int minor = iminor(pFile->f_path.dentry->d_inode);
int rc = 0;
#ifdef IP2DEBUG_IPL
#define BT_DEBUG_ENABLE 1 /* Generic messages */
#define BT_DEBUG_MSG 2 /* Prints all request/response buffers */
#define BT_DEBUG_STATES 4 /* Verbose look at state changes */
+/* BT_DEBUG_OFF must be zero to correspond to the default uninitialized
+ value */
-static int bt_debug = BT_DEBUG_OFF;
+static int bt_debug; /* 0 == BT_DEBUG_OFF */
module_param(bt_debug, int, 0644);
MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
if (copy_to_user(precv64, &recv64, sizeof(recv64)))
return -EFAULT;
- rc = ipmi_ioctl(filep->f_dentry->d_inode, filep,
+ rc = ipmi_ioctl(filep->f_path.dentry->d_inode, filep,
((cmd == COMPAT_IPMICTL_RECEIVE_MSG)
? IPMICTL_RECEIVE_MSG
: IPMICTL_RECEIVE_MSG_TRUNC),
return rc;
}
default:
- return ipmi_ioctl(filep->f_dentry->d_inode, filep, cmd, arg);
+ return ipmi_ioctl(filep->f_path.dentry->d_inode, filep, cmd, arg);
}
}
#endif
#define DEVICE_NAME "ipmidev"
-static int ipmi_major = 0;
+static int ipmi_major;
module_param(ipmi_major, int, 0);
MODULE_PARM_DESC(ipmi_major, "Sets the major number of the IPMI device. By"
" default, or if you set it to zero, it will choose the next"
static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void);
static int ipmi_init_msghandler(void);
-static int initialized = 0;
+static int initialized;
#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *proc_ipmi_root = NULL;
+static struct proc_dir_entry *proc_ipmi_root;
#endif /* CONFIG_PROC_FS */
/* Remain in auto-maintenance mode for this amount of time (in ms). */
bmc = container_of(ref, struct bmc_device, refcount);
remove_files(bmc);
- if (bmc->dev)
- platform_device_unregister(bmc->dev);
+ platform_device_unregister(bmc->dev);
kfree(bmc);
}
while (ipmi_find_bmc_prod_dev_id(&ipmidriver,
bmc->id.product_id,
- bmc->id.device_id))
- {
+ bmc->id.device_id)) {
if (!warn_printed) {
printk(KERN_WARNING PFX
"This machine has two different BMCs"
}
#endif /* CONFIG_IPMI_PANIC_EVENT */
-static int has_panicked = 0;
+static int has_panicked;
static int panic_event(struct notifier_block *this,
unsigned long event,
static int ifnum_to_use = -1;
/* Our local state. */
-static int ready = 0;
+static int ready;
static ipmi_user_t ipmi_user;
static int ipmi_ifnum;
-static void (*specific_poweroff_func)(ipmi_user_t user) = NULL;
+static void (*specific_poweroff_func)(ipmi_user_t user);
/* Holds the old poweroff function so we can restore it on removal. */
static void (*old_poweroff_func)(void);
#define IPMI_MOTOROLA_MANUFACTURER_ID 0x0000A1
#define IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID 0x0051
-static void (*atca_oem_poweroff_hook)(ipmi_user_t user) = NULL;
+static void (*atca_oem_poweroff_hook)(ipmi_user_t user);
static void pps_poweroff_atca (ipmi_user_t user)
{
atomic_set(&smi_info->req_events, 1);
}
-static int initialized = 0;
+static int initialized;
static void smi_timeout(unsigned long data)
{
static int irqs[SI_MAX_PARMS];
static int num_irqs;
static int regspacings[SI_MAX_PARMS];
-static int num_regspacings = 0;
+static int num_regspacings;
static int regsizes[SI_MAX_PARMS];
-static int num_regsizes = 0;
+static int num_regsizes;
static int regshifts[SI_MAX_PARMS];
-static int num_regshifts = 0;
+static int num_regshifts;
static int slave_addrs[SI_MAX_PARMS];
-static int num_slave_addrs = 0;
+static int num_slave_addrs;
#define IPMI_IO_ADDR_SPACE 0
#define IPMI_MEM_ADDR_SPACE 1
-static char *addr_space_to_str[] = { "I/O", "mem" };
+static char *addr_space_to_str[] = { "i/o", "mem" };
static int hotmod_handler(const char *val, struct kernel_param *kp);
{ "i/o", IPMI_IO_ADDR_SPACE },
{ NULL }
};
-static int ipmi_strcasecmp(const char *s1, const char *s2)
-{
- while (*s1 || *s2) {
- if (!*s1)
- return -1;
- if (!*s2)
- return 1;
- if (*s1 != *s2)
- return *s1 - *s2;
- s1++;
- s2++;
- }
- return 0;
-}
+
static int parse_str(struct hotmod_vals *v, int *val, char *name, char **curr)
{
char *s;
*s = '\0';
s++;
for (i = 0; hotmod_ops[i].name; i++) {
- if (ipmi_strcasecmp(*curr, v[i].name) == 0) {
+ if (strcmp(*curr, v[i].name) == 0) {
*val = v[i].val;
*curr = s;
return 0;
return -EINVAL;
}
+static int check_hotmod_int_op(const char *curr, const char *option,
+ const char *name, int *val)
+{
+ char *n;
+
+ if (strcmp(curr, name) == 0) {
+ if (!option) {
+ printk(KERN_WARNING PFX
+ "No option given for '%s'\n",
+ curr);
+ return -EINVAL;
+ }
+ *val = simple_strtoul(option, &n, 0);
+ if ((*n != '\0') || (*option == '\0')) {
+ printk(KERN_WARNING PFX
+ "Bad option given for '%s'\n",
+ curr);
+ return -EINVAL;
+ }
+ return 1;
+ }
+ return 0;
+}
+
static int hotmod_handler(const char *val, struct kernel_param *kp)
{
char *str = kstrdup(val, GFP_KERNEL);
- int rv = -EINVAL;
+ int rv;
char *next, *curr, *s, *n, *o;
enum hotmod_op op;
enum si_type si_type;
int irq;
int ipmb;
int ival;
+ int len;
struct smi_info *info;
if (!str)
return -ENOMEM;
/* Kill any trailing spaces, as we can get a "\n" from echo. */
- ival = strlen(str) - 1;
+ len = strlen(str);
+ ival = len - 1;
while ((ival >= 0) && isspace(str[ival])) {
str[ival] = '\0';
ival--;
*o = '\0';
o++;
}
-#define HOTMOD_INT_OPT(name, val) \
- if (ipmi_strcasecmp(curr, name) == 0) { \
- if (!o) { \
- printk(KERN_WARNING PFX \
- "No option given for '%s'\n", \
- curr); \
- goto out; \
- } \
- val = simple_strtoul(o, &n, 0); \
- if ((*n != '\0') || (*o == '\0')) { \
- printk(KERN_WARNING PFX \
- "Bad option given for '%s'\n", \
- curr); \
- goto out; \
- } \
- }
-
- HOTMOD_INT_OPT("rsp", regspacing)
- else HOTMOD_INT_OPT("rsi", regsize)
- else HOTMOD_INT_OPT("rsh", regshift)
- else HOTMOD_INT_OPT("irq", irq)
- else HOTMOD_INT_OPT("ipmb", ipmb)
- else {
- printk(KERN_WARNING PFX
- "Invalid hotmod option '%s'\n",
- curr);
+ rv = check_hotmod_int_op(curr, o, "rsp", ®spacing);
+ if (rv < 0)
goto out;
- }
-#undef HOTMOD_INT_OPT
+ else if (rv)
+ continue;
+ rv = check_hotmod_int_op(curr, o, "rsi", ®size);
+ if (rv < 0)
+ goto out;
+ else if (rv)
+ continue;
+ rv = check_hotmod_int_op(curr, o, "rsh", ®shift);
+ if (rv < 0)
+ goto out;
+ else if (rv)
+ continue;
+ rv = check_hotmod_int_op(curr, o, "irq", &irq);
+ if (rv < 0)
+ goto out;
+ else if (rv)
+ continue;
+ rv = check_hotmod_int_op(curr, o, "ipmb", &ipmb);
+ if (rv < 0)
+ goto out;
+ else if (rv)
+ continue;
+
+ rv = -EINVAL;
+ printk(KERN_WARNING PFX
+ "Invalid hotmod option '%s'\n",
+ curr);
+ goto out;
}
if (op == HM_ADD) {
mutex_unlock(&smi_infos_lock);
}
}
+ rv = len;
out:
kfree(str);
return rv;
info->addr_source = "hardcoded";
- if (!si_type[i] || ipmi_strcasecmp(si_type[i], "kcs") == 0) {
+ if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
info->si_type = SI_KCS;
- } else if (ipmi_strcasecmp(si_type[i], "smic") == 0) {
+ } else if (strcmp(si_type[i], "smic") == 0) {
info->si_type = SI_SMIC;
- } else if (ipmi_strcasecmp(si_type[i], "bt") == 0) {
+ } else if (strcmp(si_type[i], "bt") == 0) {
info->si_type = SI_BT;
} else {
printk(KERN_WARNING
/* Once we get an ACPI failure, we don't try any more, because we go
through the tables sequentially. Once we don't find a table, there
are no more. */
-static int acpi_failure = 0;
+static int acpi_failure;
/* For GPE-type interrupts. */
static u32 ipmi_acpi_gpe(void *context)
static __devinit int try_init_acpi(struct SPMITable *spmi)
{
struct smi_info *info;
- char *io_type;
u8 addr_space;
if (spmi->IPMIlegacy != 1) {
info->io.regshift = spmi->addr.register_bit_offset;
if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
- io_type = "memory";
info->io_setup = mem_setup;
info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
- io_type = "I/O";
info->io_setup = port_setup;
info->io.addr_type = IPMI_MEM_ADDR_SPACE;
} else {
#endif
#ifdef CONFIG_ACPI
- if (si_trydefaults)
- acpi_find_bmc();
+ acpi_find_bmc();
#endif
#ifdef CONFIG_PCI
static int nowayout = WATCHDOG_NOWAYOUT;
-static ipmi_user_t watchdog_user = NULL;
+static ipmi_user_t watchdog_user;
static int watchdog_ifnum;
/* Default the timeout to 10 seconds. */
static int timeout = 10;
/* The pre-timeout is disabled by default. */
-static int pretimeout = 0;
+static int pretimeout;
/* Default action is to reset the board on a timeout. */
static unsigned char action_val = WDOG_TIMEOUT_RESET;
static char preop[16] = "preop_none";
static DEFINE_SPINLOCK(ipmi_read_lock);
-static char data_to_read = 0;
+static char data_to_read;
static DECLARE_WAIT_QUEUE_HEAD(read_q);
-static struct fasync_struct *fasync_q = NULL;
-static char pretimeout_since_last_heartbeat = 0;
+static struct fasync_struct *fasync_q;
+static char pretimeout_since_last_heartbeat;
static char expect_close;
static int ifnum_to_use = -1;
/* If true, the driver will start running as soon as it is configured
and ready. */
-static int start_now = 0;
+static int start_now;
static int set_param_int(const char *val, struct kernel_param *kp)
{
static unsigned char ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
/* If shutting down via IPMI, we ignore the heartbeat. */
-static int ipmi_ignore_heartbeat = 0;
+static int ipmi_ignore_heartbeat;
/* Is someone using the watchdog? Only one user is allowed. */
-static unsigned long ipmi_wdog_open = 0;
+static unsigned long ipmi_wdog_open;
/* If set to 1, the heartbeat command will set the state to reset and
start the timer. The timer doesn't normally run when the driver is
first opened until the heartbeat is set the first time, this
variable is used to accomplish this. */
-static int ipmi_start_timer_on_heartbeat = 0;
+static int ipmi_start_timer_on_heartbeat;
/* IPMI version of the BMC. */
static unsigned char ipmi_version_major;
static int prev_card = 3; /* start servicing isi_card[0] */
static struct tty_driver *isicom_normal;
-static struct timer_list tx;
+static DECLARE_COMPLETION(isi_timerdone);
static char re_schedule = 1;
static void isicom_tx(unsigned long _data);
static void isicom_start(struct tty_struct *tty);
+static DEFINE_TIMER(tx, isicom_tx, 0, 0);
+
/* baud index mappings from linux defns to isi */
static signed char linuxb_to_isib[] = {
unsigned short shift_count;
struct isi_port * ports;
signed char count;
- unsigned char isa;
spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */
unsigned long flags;
+ unsigned int index;
};
struct isi_port {
/* schedule another tx for hopefully in about 10ms */
sched_again:
if (!re_schedule) {
- re_schedule = 2;
+ complete(&isi_timerdone);
return;
}
- init_timer(&tx);
- tx.expires = jiffies + HZ/100;
- tx.data = 0;
- tx.function = isicom_tx;
- add_timer(&tx);
-
- return;
+ mod_timer(&tx, jiffies + msecs_to_jiffies(10));
}
/* Interrupt handlers */
base = card->base;
spin_lock(&card->card_lock);
- if (card->isa == NO) {
- /*
- * disable any interrupts from the PCI card and lower the
- * interrupt line
- */
- outw(0x8000, base+0x04);
- ClearInterrupt(base);
- }
+ /*
+ * disable any interrupts from the PCI card and lower the
+ * interrupt line
+ */
+ outw(0x8000, base+0x04);
+ ClearInterrupt(base);
inw(base); /* get the dummy word out */
header = inw(base);
if (channel + 1 > card->port_count) {
printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
"%d(channel) > port_count.\n", base, channel+1);
- if (card->isa)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
port = card->ports + channel;
if (!(port->flags & ASYNC_INITIALIZED)) {
- if (card->isa)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
return IRQ_HANDLED;
}
}
if (byte_count & 0x01)
inw(base);
- if (card->isa == YES)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
return IRQ_HANDLED;
}
}
tty_flip_buffer_push(tty);
}
- if (card->isa == YES)
- ClearInterrupt(base);
- else
- outw(0x0000, base+0x04); /* enable interrupts */
+ outw(0x0000, base+0x04); /* enable interrupts */
return IRQ_HANDLED;
}
{
struct isi_port *port;
struct isi_board *card;
- unsigned int line, board;
- int error;
+ unsigned int board;
+ int error, line;
line = tty->index;
if (line < 0 || line > PORT_COUNT-1)
/* set_termios et all */
static void isicom_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct isi_port *port = tty->driver_data;
* Driver init and deinit functions
*/
-static int __devinit isicom_register_ioregion(struct pci_dev *pdev,
- const unsigned int index)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
-
- if (!board->base)
- return -EINVAL;
-
- if (!request_region(board->base, 16, ISICOM_NAME)) {
- dev_dbg(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
- "will be disabled.\n", board->base, board->base + 15,
- index + 1);
- return -EBUSY;
- }
-
- return 0;
-}
-
-static void isicom_unregister_ioregion(struct pci_dev *pdev)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
-
- if (!board->base)
- return;
-
- release_region(board->base, 16);
- dev_dbg(&pdev->dev, "I/O Region 0x%lx-0x%lx released.\n",
- board->base, board->base + 15);
- board->base = 0;
-}
-
static const struct tty_operations isicom_ops = {
.open = isicom_open,
.close = isicom_close,
.tiocmset = isicom_tiocmset,
};
-static int __devinit isicom_register_tty_driver(void)
-{
- int error = -ENOMEM;
-
- /* tty driver structure initialization */
- isicom_normal = alloc_tty_driver(PORT_COUNT);
- if (!isicom_normal)
- goto end;
-
- isicom_normal->owner = THIS_MODULE;
- isicom_normal->name = "ttyM";
- isicom_normal->major = ISICOM_NMAJOR;
- isicom_normal->minor_start = 0;
- isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
- isicom_normal->subtype = SERIAL_TYPE_NORMAL;
- isicom_normal->init_termios = tty_std_termios;
- isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
- CLOCAL;
- isicom_normal->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(isicom_normal, &isicom_ops);
-
- if ((error = tty_register_driver(isicom_normal))) {
- pr_dbg("Couldn't register the dialin driver, error=%d\n",
- error);
- put_tty_driver(isicom_normal);
- }
-end:
- return error;
-}
-
-static void isicom_unregister_tty_driver(void)
-{
- int error;
-
- if ((error = tty_unregister_driver(isicom_normal)))
- pr_dbg("couldn't unregister normal driver, error=%d.\n", error);
-
- put_tty_driver(isicom_normal);
-}
-
-static int __devinit isicom_register_isr(struct pci_dev *pdev,
- const unsigned int index)
-{
- struct isi_board *board = pci_get_drvdata(pdev);
- unsigned long irqflags = IRQF_DISABLED;
- int retval = -EINVAL;
-
- if (!board->base)
- goto end;
-
- if (board->isa == NO)
- irqflags |= IRQF_SHARED;
-
- retval = request_irq(board->irq, isicom_interrupt, irqflags,
- ISICOM_NAME, board);
- if (retval < 0)
- dev_warn(&pdev->dev, "Could not install handler at Irq %d. "
- "Card%d will be disabled.\n", board->irq, index + 1);
- else
- retval = 0;
-end:
- return retval;
-}
-
static int __devinit reset_card(struct pci_dev *pdev,
const unsigned int card, unsigned int *signature)
{
*signature = inw(base + 0x4) & 0xff;
- if (board->isa == YES) {
- if (!(inw(base + 0xe) & 0x1) || (inw(base + 0x2))) {
- dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
- inw(base + 0x2), inw(base + 0xe));
- dev_err(&pdev->dev, "ISILoad:ISA Card%d reset failure "
- "(Possible bad I/O Port Address 0x%lx).\n",
- card + 1, base);
- retval = -EIO;
- goto end;
- }
- } else {
- portcount = inw(base + 0x2);
- if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) &&
- (portcount != 4) && (portcount != 8))) {
- dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
- inw(base + 0x2), inw(base + 0xe));
- dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure "
- "(Possible bad I/O Port Address 0x%lx).\n",
- card + 1, base);
- retval = -EIO;
- goto end;
- }
+ portcount = inw(base + 0x2);
+ if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) &&
+ (portcount != 4) && (portcount != 8))) {
+ dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
+ inw(base + 0x2), inw(base + 0xe));
+ dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure "
+ "(Possible bad I/O Port Address 0x%lx).\n",
+ card + 1, base);
+ retval = -EIO;
+ goto end;
}
switch (*signature) {
case 0xa5:
case 0xbb:
case 0xdd:
- board->port_count = (board->isa == NO && portcount == 4) ? 4 :
- 8;
+ board->port_count = (portcount == 4) ? 4 : 8;
board->shift_count = 12;
break;
case 0xcc:
}
data = kmalloc(word_count * 2, GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(&pdev->dev, "Card%d, firmware upload "
+ "failed, not enough memory\n", index + 1);
+ goto errrelfw;
+ }
inw(base);
insw(base, data, word_count);
InterruptTheCard(base);
/*
* Insmod can set static symbols so keep these static
*/
-static int io[4];
-static int irq[4];
static int card;
static int __devinit isicom_probe(struct pci_dev *pdev,
break;
}
+ board->index = index;
board->base = ioaddr;
board->irq = pciirq;
- board->isa = NO;
card++;
pci_set_drvdata(pdev, board);
- retval = isicom_register_ioregion(pdev, index);
- if (retval < 0)
+ retval = pci_request_region(pdev, 3, ISICOM_NAME);
+ if (retval) {
+ dev_err(&pdev->dev, "I/O Region 0x%lx-0x%lx is busy. Card%d "
+ "will be disabled.\n", board->base, board->base + 15,
+ index + 1);
+ retval = -EBUSY;
goto err;
+ }
- retval = isicom_register_isr(pdev, index);
- if (retval < 0)
+ retval = request_irq(board->irq, isicom_interrupt,
+ IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
+ if (retval < 0) {
+ dev_err(&pdev->dev, "Could not install handler at Irq %d. "
+ "Card%d will be disabled.\n", board->irq, index + 1);
goto errunrr;
+ }
retval = reset_card(pdev, index, &signature);
if (retval < 0)
if (retval < 0)
goto errunri;
+ for (index = 0; index < board->port_count; index++)
+ tty_register_device(isicom_normal, board->index * 16 + index,
+ &pdev->dev);
+
return 0;
errunri:
free_irq(board->irq, board);
errunrr:
- isicom_unregister_ioregion(pdev);
+ pci_release_region(pdev, 3);
err:
board->base = 0;
return retval;
static void __devexit isicom_remove(struct pci_dev *pdev)
{
struct isi_board *board = pci_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < board->port_count; i++)
+ tty_unregister_device(isicom_normal, board->index * 16 + i);
free_irq(board->irq, board);
- isicom_unregister_ioregion(pdev);
+ pci_release_region(pdev, 3);
}
-static int __devinit isicom_setup(void)
+static int __init isicom_init(void)
{
int retval, idx, channel;
struct isi_port *port;
card = 0;
- memset(isi_ports, 0, sizeof(isi_ports));
for(idx = 0; idx < BOARD_COUNT; idx++) {
port = &isi_ports[idx * 16];
}
isi_card[idx].base = 0;
isi_card[idx].irq = 0;
-
- if (!io[idx])
- continue;
-
- if (irq[idx] == 2 || irq[idx] == 3 || irq[idx] == 4 ||
- irq[idx] == 5 || irq[idx] == 7 ||
- irq[idx] == 10 || irq[idx] == 11 ||
- irq[idx] == 12 || irq[idx] == 15) {
- printk(KERN_ERR "ISICOM: ISA not supported yet.\n");
- retval = -EINVAL;
- goto error;
- } else
- printk(KERN_ERR "ISICOM: Irq %d unsupported. "
- "Disabling Card%d...\n", irq[idx], idx + 1);
}
- retval = isicom_register_tty_driver();
- if (retval < 0)
+ /* tty driver structure initialization */
+ isicom_normal = alloc_tty_driver(PORT_COUNT);
+ if (!isicom_normal) {
+ retval = -ENOMEM;
goto error;
+ }
+
+ isicom_normal->owner = THIS_MODULE;
+ isicom_normal->name = "ttyM";
+ isicom_normal->major = ISICOM_NMAJOR;
+ isicom_normal->minor_start = 0;
+ isicom_normal->type = TTY_DRIVER_TYPE_SERIAL;
+ isicom_normal->subtype = SERIAL_TYPE_NORMAL;
+ isicom_normal->init_termios = tty_std_termios;
+ isicom_normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ CLOCAL;
+ isicom_normal->flags = TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV;
+ tty_set_operations(isicom_normal, &isicom_ops);
+
+ retval = tty_register_driver(isicom_normal);
+ if (retval) {
+ pr_dbg("Couldn't register the dialin driver\n");
+ goto err_puttty;
+ }
retval = pci_register_driver(&isicom_driver);
if (retval < 0) {
printk(KERN_ERR "ISICOM: Unable to register pci driver.\n");
- goto errtty;
+ goto err_unrtty;
}
- init_timer(&tx);
- tx.expires = jiffies + 1;
- tx.data = 0;
- tx.function = isicom_tx;
- re_schedule = 1;
- add_timer(&tx);
+ mod_timer(&tx, jiffies + 1);
return 0;
-errtty:
- isicom_unregister_tty_driver();
+err_unrtty:
+ tty_unregister_driver(isicom_normal);
+err_puttty:
+ put_tty_driver(isicom_normal);
error:
return retval;
}
static void __exit isicom_exit(void)
{
- unsigned int index = 0;
-
re_schedule = 0;
- while (re_schedule != 2 && index++ < 100)
- msleep(10);
+ wait_for_completion_timeout(&isi_timerdone, HZ);
pci_unregister_driver(&isicom_driver);
- isicom_unregister_tty_driver();
+ tty_unregister_driver(isicom_normal);
+ put_tty_driver(isicom_normal);
}
-module_init(isicom_setup);
+module_init(isicom_init);
module_exit(isicom_exit);
MODULE_AUTHOR("MultiTech");
MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
MODULE_LICENSE("GPL");
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O ports for the cards");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "Interrupts for the cards");
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*****************************************************************************/
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/eisa.h>
+#include <linux/ctype.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#define BRD_BRUMBY4 2
#define BRD_ONBOARD2 3
#define BRD_ONBOARD 4
-#define BRD_BRUMBY8 5
-#define BRD_BRUMBY16 6
#define BRD_ONBOARDE 7
-#define BRD_ONBOARD32 9
-#define BRD_ONBOARD2_32 10
-#define BRD_ONBOARDRS 11
-#define BRD_EASYIO 20
-#define BRD_ECH 21
-#define BRD_ECHMC 22
#define BRD_ECP 23
#define BRD_ECPE 24
#define BRD_ECPMC 25
-#define BRD_ECHPCI 26
-#define BRD_ECH64PCI 27
-#define BRD_EASYIOPCI 28
#define BRD_ECPPCI 29
#define BRD_BRUMBY BRD_BRUMBY4
* interrupt is required.
*/
-typedef struct {
+struct stlconf {
int brdtype;
int ioaddr1;
int ioaddr2;
unsigned long memaddr;
int irq;
int irqtype;
-} stlconf_t;
-
-static stlconf_t stli_brdconf[] = {
- /*{ BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 },*/
};
-static int stli_nrbrds = ARRAY_SIZE(stli_brdconf);
+static unsigned int stli_nrbrds;
/* stli_lock must NOT be taken holding brd_lock */
static spinlock_t stli_lock; /* TTY logic lock */
* with this termios initially. Basically all it defines is a raw port
* at 9600 baud, 8 data bits, no parity, 1 stop bit.
*/
-static struct termios stli_deftermios = {
+static struct ktermios stli_deftermios = {
.c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
.c_cc = INIT_C_CC,
+ .c_ispeed = 9600,
+ .c_ospeed = 9600,
};
/*
*/
static comstats_t stli_comstats;
static combrd_t stli_brdstats;
-static asystats_t stli_cdkstats;
-static stlibrd_t stli_dummybrd;
-static stliport_t stli_dummyport;
+static struct asystats stli_cdkstats;
/*****************************************************************************/
-static stlibrd_t *stli_brds[STL_MAXBRDS];
+static DEFINE_MUTEX(stli_brdslock);
+static struct stlibrd *stli_brds[STL_MAXBRDS];
static int stli_shared;
*/
#define BST_FOUND 0x1
#define BST_STARTED 0x2
+#define BST_PROBED 0x4
/*
* Define the set of port state flags. These are marked for internal
"Brumby",
"Brumby",
"ONboard-EI",
- (char *) NULL,
+ NULL,
"ONboard",
"ONboard-MC",
"ONboard-MC",
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
"EasyIO",
"EC8/32-AT",
"EC8/32-MC",
* parse any module arguments.
*/
-typedef struct stlibrdtype {
+static struct stlibrdtype {
char *name;
int type;
-} stlibrdtype_t;
-
-static stlibrdtype_t stli_brdstr[] = {
+} stli_brdstr[] = {
{ "stallion", BRD_STALLION },
{ "1", BRD_STALLION },
{ "brumby", BRD_BRUMBY },
module_param_array(board3, charp, NULL, 0);
MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]");
+#if STLI_EISAPROBE != 0
/*
* Set up a default memory address table for EISA board probing.
* The default addresses are all bellow 1Mbyte, which has to be the
};
static int stli_eisamempsize = ARRAY_SIZE(stli_eisamemprobeaddrs);
+#endif
/*
* Define the Stallion PCI vendor and device IDs.
*/
-#ifdef CONFIG_PCI
-#ifndef PCI_VENDOR_ID_STALLION
-#define PCI_VENDOR_ID_STALLION 0x124d
-#endif
#ifndef PCI_DEVICE_ID_ECRA
#define PCI_DEVICE_ID_ECRA 0x0004
#endif
};
MODULE_DEVICE_TABLE(pci, istallion_pci_tbl);
-#endif /* CONFIG_PCI */
+static struct pci_driver stli_pcidriver;
/*****************************************************************************/
/*****************************************************************************/
/*
- * Define some handy local macros...
- */
-#undef MIN
-#define MIN(a,b) (((a) <= (b)) ? (a) : (b))
-
-#undef TOLOWER
-#define TOLOWER(x) ((((x) >= 'A') && ((x) <= 'Z')) ? ((x) + 0x20) : (x))
-
-/*****************************************************************************/
-
-/*
* Prototype all functions in this driver!
*/
-static int stli_parsebrd(stlconf_t *confp, char **argp);
-static int stli_init(void);
+static int stli_parsebrd(struct stlconf *confp, char **argp);
static int stli_open(struct tty_struct *tty, struct file *filp);
static void stli_close(struct tty_struct *tty, struct file *filp);
static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count);
static int stli_writeroom(struct tty_struct *tty);
static int stli_charsinbuffer(struct tty_struct *tty);
static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
-static void stli_settermios(struct tty_struct *tty, struct termios *old);
+static void stli_settermios(struct tty_struct *tty, struct ktermios *old);
static void stli_throttle(struct tty_struct *tty);
static void stli_unthrottle(struct tty_struct *tty);
static void stli_stop(struct tty_struct *tty);
static void stli_waituntilsent(struct tty_struct *tty, int timeout);
static void stli_sendxchar(struct tty_struct *tty, char ch);
static void stli_hangup(struct tty_struct *tty);
-static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *pos);
+static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos);
-static int stli_brdinit(stlibrd_t *brdp);
-static int stli_startbrd(stlibrd_t *brdp);
+static int stli_brdinit(struct stlibrd *brdp);
+static int stli_startbrd(struct stlibrd *brdp);
static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp);
static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp);
static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg);
-static void stli_brdpoll(stlibrd_t *brdp, cdkhdr_t __iomem *hdrp);
+static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp);
static void stli_poll(unsigned long arg);
-static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp);
-static int stli_initopen(stlibrd_t *brdp, stliport_t *portp);
-static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait);
-static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait);
-static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp);
+static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp);
+static int stli_initopen(struct stlibrd *brdp, struct stliport *portp);
+static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
+static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
+static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp);
static void stli_dohangup(struct work_struct *);
-static int stli_setport(stliport_t *portp);
-static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp);
-static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp);
+static int stli_setport(struct stliport *portp);
+static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
+static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
+static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
+static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp);
+static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
static long stli_mktiocm(unsigned long sigvalue);
-static void stli_read(stlibrd_t *brdp, stliport_t *portp);
-static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp);
-static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp);
+static void stli_read(struct stlibrd *brdp, struct stliport *portp);
+static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp);
+static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp);
static int stli_getbrdstats(combrd_t __user *bp);
-static int stli_getportstats(stliport_t *portp, comstats_t __user *cp);
-static int stli_portcmdstats(stliport_t *portp);
-static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp);
-static int stli_getportstruct(stliport_t __user *arg);
-static int stli_getbrdstruct(stlibrd_t __user *arg);
-static stlibrd_t *stli_allocbrd(void);
-
-static void stli_ecpinit(stlibrd_t *brdp);
-static void stli_ecpenable(stlibrd_t *brdp);
-static void stli_ecpdisable(stlibrd_t *brdp);
-static void __iomem *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_ecpreset(stlibrd_t *brdp);
-static void stli_ecpintr(stlibrd_t *brdp);
-static void stli_ecpeiinit(stlibrd_t *brdp);
-static void stli_ecpeienable(stlibrd_t *brdp);
-static void stli_ecpeidisable(stlibrd_t *brdp);
-static void __iomem *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_ecpeireset(stlibrd_t *brdp);
-static void stli_ecpmcenable(stlibrd_t *brdp);
-static void stli_ecpmcdisable(stlibrd_t *brdp);
-static void __iomem *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_ecpmcreset(stlibrd_t *brdp);
-static void stli_ecppciinit(stlibrd_t *brdp);
-static void __iomem *stli_ecppcigetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_ecppcireset(stlibrd_t *brdp);
-
-static void stli_onbinit(stlibrd_t *brdp);
-static void stli_onbenable(stlibrd_t *brdp);
-static void stli_onbdisable(stlibrd_t *brdp);
-static void __iomem *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_onbreset(stlibrd_t *brdp);
-static void stli_onbeinit(stlibrd_t *brdp);
-static void stli_onbeenable(stlibrd_t *brdp);
-static void stli_onbedisable(stlibrd_t *brdp);
-static void __iomem *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_onbereset(stlibrd_t *brdp);
-static void stli_bbyinit(stlibrd_t *brdp);
-static void __iomem *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_bbyreset(stlibrd_t *brdp);
-static void stli_stalinit(stlibrd_t *brdp);
-static void __iomem *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line);
-static void stli_stalreset(stlibrd_t *brdp);
-
-static stliport_t *stli_getport(int brdnr, int panelnr, int portnr);
-
-static int stli_initecp(stlibrd_t *brdp);
-static int stli_initonb(stlibrd_t *brdp);
-static int stli_eisamemprobe(stlibrd_t *brdp);
-static int stli_initports(stlibrd_t *brdp);
-
-#ifdef CONFIG_PCI
-static int stli_initpcibrd(int brdtype, struct pci_dev *devp);
+static int stli_getportstats(struct stliport *portp, comstats_t __user *cp);
+static int stli_portcmdstats(struct stliport *portp);
+static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp);
+static int stli_getportstruct(struct stliport __user *arg);
+static int stli_getbrdstruct(struct stlibrd __user *arg);
+static struct stlibrd *stli_allocbrd(void);
+
+static void stli_ecpinit(struct stlibrd *brdp);
+static void stli_ecpenable(struct stlibrd *brdp);
+static void stli_ecpdisable(struct stlibrd *brdp);
+static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_ecpreset(struct stlibrd *brdp);
+static void stli_ecpintr(struct stlibrd *brdp);
+static void stli_ecpeiinit(struct stlibrd *brdp);
+static void stli_ecpeienable(struct stlibrd *brdp);
+static void stli_ecpeidisable(struct stlibrd *brdp);
+static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_ecpeireset(struct stlibrd *brdp);
+static void stli_ecpmcenable(struct stlibrd *brdp);
+static void stli_ecpmcdisable(struct stlibrd *brdp);
+static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_ecpmcreset(struct stlibrd *brdp);
+static void stli_ecppciinit(struct stlibrd *brdp);
+static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_ecppcireset(struct stlibrd *brdp);
+
+static void stli_onbinit(struct stlibrd *brdp);
+static void stli_onbenable(struct stlibrd *brdp);
+static void stli_onbdisable(struct stlibrd *brdp);
+static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_onbreset(struct stlibrd *brdp);
+static void stli_onbeinit(struct stlibrd *brdp);
+static void stli_onbeenable(struct stlibrd *brdp);
+static void stli_onbedisable(struct stlibrd *brdp);
+static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_onbereset(struct stlibrd *brdp);
+static void stli_bbyinit(struct stlibrd *brdp);
+static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_bbyreset(struct stlibrd *brdp);
+static void stli_stalinit(struct stlibrd *brdp);
+static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
+static void stli_stalreset(struct stlibrd *brdp);
+
+static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, unsigned int portnr);
+
+static int stli_initecp(struct stlibrd *brdp);
+static int stli_initonb(struct stlibrd *brdp);
+#if STLI_EISAPROBE != 0
+static int stli_eisamemprobe(struct stlibrd *brdp);
#endif
+static int stli_initports(struct stlibrd *brdp);
/*****************************************************************************/
static struct class *istallion_class;
-/*
- * Loadable module initialization stuff.
- */
-
-static int __init istallion_module_init(void)
-{
- stli_init();
- return 0;
-}
-
-/*****************************************************************************/
-
-static void __exit istallion_module_exit(void)
-{
- stlibrd_t *brdp;
- stliport_t *portp;
- int i, j;
-
- printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle,
- stli_drvversion);
-
- /*
- * Free up all allocated resources used by the ports. This includes
- * memory and interrupts.
- */
- if (stli_timeron) {
- stli_timeron = 0;
- del_timer_sync(&stli_timerlist);
- }
-
- i = tty_unregister_driver(stli_serial);
- if (i) {
- printk("STALLION: failed to un-register tty driver, "
- "errno=%d\n", -i);
- return;
- }
- put_tty_driver(stli_serial);
- for (i = 0; i < 4; i++)
- class_device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, i));
- class_destroy(istallion_class);
- if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem")))
- printk("STALLION: failed to un-register serial memory device, "
- "errno=%d\n", -i);
-
- kfree(stli_txcookbuf);
-
- for (i = 0; (i < stli_nrbrds); i++) {
- if ((brdp = stli_brds[i]) == NULL)
- continue;
- for (j = 0; (j < STL_MAXPORTS); j++) {
- portp = brdp->ports[j];
- if (portp != NULL) {
- if (portp->tty != NULL)
- tty_hangup(portp->tty);
- kfree(portp);
- }
- }
-
- iounmap(brdp->membase);
- if (brdp->iosize > 0)
- release_region(brdp->iobase, brdp->iosize);
- kfree(brdp);
- stli_brds[i] = NULL;
- }
-}
-
-module_init(istallion_module_init);
-module_exit(istallion_module_exit);
-
-/*****************************************************************************/
-
-/*
- * Check for any arguments passed in on the module load command line.
- */
-
-static void stli_argbrds(void)
+static void stli_cleanup_ports(struct stlibrd *brdp)
{
- stlconf_t conf;
- stlibrd_t *brdp;
- int i;
-
- for (i = stli_nrbrds; i < ARRAY_SIZE(stli_brdsp); i++) {
- memset(&conf, 0, sizeof(conf));
- if (stli_parsebrd(&conf, stli_brdsp[i]) == 0)
- continue;
- if ((brdp = stli_allocbrd()) == NULL)
- continue;
- stli_nrbrds = i + 1;
- brdp->brdnr = i;
- brdp->brdtype = conf.brdtype;
- brdp->iobase = conf.ioaddr1;
- brdp->memaddr = conf.memaddr;
- stli_brdinit(brdp);
- }
-}
-
-/*****************************************************************************/
-
-/*
- * Convert an ascii string number into an unsigned long.
- */
-
-static unsigned long stli_atol(char *str)
-{
- unsigned long val;
- int base, c;
- char *sp;
-
- val = 0;
- sp = str;
- if ((*sp == '0') && (*(sp+1) == 'x')) {
- base = 16;
- sp += 2;
- } else if (*sp == '0') {
- base = 8;
- sp++;
- } else {
- base = 10;
- }
-
- for (; (*sp != 0); sp++) {
- c = (*sp > '9') ? (TOLOWER(*sp) - 'a' + 10) : (*sp - '0');
- if ((c < 0) || (c >= base)) {
- printk("STALLION: invalid argument %s\n", str);
- val = 0;
- break;
+ struct stliport *portp;
+ unsigned int j;
+
+ for (j = 0; j < STL_MAXPORTS; j++) {
+ portp = brdp->ports[j];
+ if (portp != NULL) {
+ if (portp->tty != NULL)
+ tty_hangup(portp->tty);
+ kfree(portp);
}
- val = (val * base) + c;
}
- return(val);
}
/*****************************************************************************/
* Parse the supplied argument string, into the board conf struct.
*/
-static int stli_parsebrd(stlconf_t *confp, char **argp)
+static int stli_parsebrd(struct stlconf *confp, char **argp)
{
+ unsigned int i;
char *sp;
- int i;
if (argp[0] == NULL || *argp[0] == 0)
return 0;
for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
- *sp = TOLOWER(*sp);
+ *sp = tolower(*sp);
for (i = 0; i < ARRAY_SIZE(stli_brdstr); i++) {
if (strcmp(stli_brdstr[i].name, argp[0]) == 0)
confp->brdtype = stli_brdstr[i].type;
if (argp[1] != NULL && *argp[1] != 0)
- confp->ioaddr1 = stli_atol(argp[1]);
+ confp->ioaddr1 = simple_strtoul(argp[1], NULL, 0);
if (argp[2] != NULL && *argp[2] != 0)
- confp->memaddr = stli_atol(argp[2]);
+ confp->memaddr = simple_strtoul(argp[2], NULL, 0);
return(1);
}
static int stli_open(struct tty_struct *tty, struct file *filp)
{
- stlibrd_t *brdp;
- stliport_t *portp;
- unsigned int minordev;
- int brdnr, portnr, rc;
+ struct stlibrd *brdp;
+ struct stliport *portp;
+ unsigned int minordev, brdnr, portnr;
+ int rc;
minordev = tty->index;
brdnr = MINOR2BRD(minordev);
if ((brdp->state & BST_STARTED) == 0)
return -ENODEV;
portnr = MINOR2PORT(minordev);
- if ((portnr < 0) || (portnr > brdp->nrports))
+ if (portnr > brdp->nrports)
return -ENODEV;
portp = brdp->ports[portnr];
static void stli_close(struct tty_struct *tty, struct file *filp)
{
- stlibrd_t *brdp;
- stliport_t *portp;
+ struct stlibrd *brdp;
+ struct stliport *portp;
unsigned long flags;
portp = tty->driver_data;
* this still all happens pretty quickly.
*/
-static int stli_initopen(stlibrd_t *brdp, stliport_t *portp)
+static int stli_initopen(struct stlibrd *brdp, struct stliport *portp)
{
struct tty_struct *tty;
asynotify_t nt;
* to overlap.
*/
-static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait)
+static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait)
{
cdkhdr_t __iomem *hdrp;
cdkctrl_t __iomem *cp;
* wait is true then must have user context (to sleep).
*/
-static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait)
+static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait)
{
cdkhdr_t __iomem *hdrp;
cdkctrl_t __iomem *cp;
* to complete (as opposed to initiating the command then returning).
*/
-static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
{
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_CMDING, &portp->state));
* waiting for the command to complete - so must have user context.
*/
-static int stli_setport(stliport_t *portp)
+static int stli_setport(struct stliport *portp)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
asyport_t aport;
if (portp == NULL)
return -ENODEV;
if (portp->tty == NULL)
return -ENODEV;
- if (portp->brdnr < 0 && portp->brdnr >= stli_nrbrds)
+ if (portp->brdnr >= stli_nrbrds)
return -ENODEV;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
* maybe because if we are clocal then we don't need to wait...
*/
-static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp)
+static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp)
{
unsigned long flags;
int rc, doclocal;
unsigned char __iomem *bits;
unsigned char __iomem *shbuf;
unsigned char *chbuf;
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int len, stlen, head, tail, size;
unsigned long flags;
portp = tty->driver_data;
if (portp == NULL)
return 0;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+ if (portp->brdnr >= stli_nrbrds)
return 0;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
stlen = len;
}
- len = MIN(len, count);
+ len = min(len, (unsigned int)count);
count = 0;
shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->txoffset);
while (len > 0) {
- stlen = MIN(len, stlen);
+ stlen = min(len, stlen);
memcpy_toio(shbuf + head, chbuf, stlen);
chbuf += stlen;
len -= stlen;
unsigned char __iomem *bits;
cdkasy_t __iomem *ap;
struct tty_struct *cooktty;
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int len, stlen, head, tail, size, count, cooksize;
unsigned char *buf;
unsigned char __iomem *shbuf;
portp = tty->driver_data;
if (portp == NULL)
return;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+ if (portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
stlen = len;
}
- len = MIN(len, cooksize);
+ len = min(len, cooksize);
count = 0;
shbuf = EBRDGETMEMPTR(brdp, portp->txoffset);
buf = stli_txcookbuf;
while (len > 0) {
- stlen = MIN(len, stlen);
+ stlen = min(len, stlen);
memcpy_toio(shbuf + head, buf, stlen);
buf += stlen;
len -= stlen;
static int stli_writeroom(struct tty_struct *tty)
{
cdkasyrq_t __iomem *rp;
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int head, tail, len;
unsigned long flags;
portp = tty->driver_data;
if (portp == NULL)
return 0;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+ if (portp->brdnr >= stli_nrbrds)
return 0;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
static int stli_charsinbuffer(struct tty_struct *tty)
{
cdkasyrq_t __iomem *rp;
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int head, tail, len;
unsigned long flags;
portp = tty->driver_data;
if (portp == NULL)
return 0;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+ if (portp->brdnr >= stli_nrbrds)
return 0;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
* Generate the serial struct info.
*/
-static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp)
+static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp)
{
struct serial_struct sio;
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
memset(&sio, 0, sizeof(struct serial_struct));
sio.type = PORT_UNKNOWN;
* just quietly ignore any requests to change irq, etc.
*/
-static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp)
+static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp)
{
struct serial_struct sio;
int rc;
static int stli_tiocmget(struct tty_struct *tty, struct file *file)
{
- stliport_t *portp = tty->driver_data;
- stlibrd_t *brdp;
+ struct stliport *portp = tty->driver_data;
+ struct stlibrd *brdp;
int rc;
if (portp == NULL)
return -ENODEV;
- if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ if (portp->brdnr >= stli_nrbrds)
return 0;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
static int stli_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- stliport_t *portp = tty->driver_data;
- stlibrd_t *brdp;
+ struct stliport *portp = tty->driver_data;
+ struct stlibrd *brdp;
int rts = -1, dtr = -1;
if (portp == NULL)
return -ENODEV;
- if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ if (portp->brdnr >= stli_nrbrds)
return 0;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
{
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned int ival;
int rc;
void __user *argp = (void __user *)arg;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
- if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ if (portp->brdnr >= stli_nrbrds)
return 0;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
* Looks like it is true for the current ttys implementation..!!
*/
-static void stli_settermios(struct tty_struct *tty, struct termios *old)
+static void stli_settermios(struct tty_struct *tty, struct ktermios *old)
{
- stliport_t *portp;
- stlibrd_t *brdp;
- struct termios *tiosp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
+ struct ktermios *tiosp;
asyport_t aport;
if (tty == NULL)
portp = tty->driver_data;
if (portp == NULL)
return;
- if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ if (portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
static void stli_throttle(struct tty_struct *tty)
{
- stliport_t *portp = tty->driver_data;
+ struct stliport *portp = tty->driver_data;
if (portp == NULL)
return;
set_bit(ST_RXSTOP, &portp->state);
static void stli_unthrottle(struct tty_struct *tty)
{
- stliport_t *portp = tty->driver_data;
+ struct stliport *portp = tty->driver_data;
if (portp == NULL)
return;
clear_bit(ST_RXSTOP, &portp->state);
static void stli_dohangup(struct work_struct *ugly_api)
{
- stliport_t *portp = container_of(ugly_api, stliport_t, tqhangup);
+ struct stliport *portp = container_of(ugly_api, struct stliport, tqhangup);
if (portp->tty != NULL) {
tty_hangup(portp->tty);
}
static void stli_hangup(struct tty_struct *tty)
{
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned long flags;
portp = tty->driver_data;
if (portp == NULL)
return;
- if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ if (portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
static void stli_flushbuffer(struct tty_struct *tty)
{
- stliport_t *portp;
- stlibrd_t *brdp;
+ struct stliport *portp;
+ struct stlibrd *brdp;
unsigned long ftype, flags;
portp = tty->driver_data;
if (portp == NULL)
return;
- if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ if (portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
static void stli_breakctl(struct tty_struct *tty, int state)
{
- stlibrd_t *brdp;
- stliport_t *portp;
+ struct stlibrd *brdp;
+ struct stliport *portp;
long arg;
portp = tty->driver_data;
if (portp == NULL)
return;
- if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ if (portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
static void stli_waituntilsent(struct tty_struct *tty, int timeout)
{
- stliport_t *portp;
+ struct stliport *portp;
unsigned long tend;
if (tty == NULL)
static void stli_sendxchar(struct tty_struct *tty, char ch)
{
- stlibrd_t *brdp;
- stliport_t *portp;
+ struct stlibrd *brdp;
+ struct stliport *portp;
asyctrl_t actrl;
portp = tty->driver_data;
if (portp == NULL)
return;
- if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ if (portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
* short then padded with spaces).
*/
-static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *pos)
+static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos)
{
char *sp, *uart;
int rc, cnt;
static int stli_readproc(char *page, char **start, off_t off, int count, int *eof, void *data)
{
- stlibrd_t *brdp;
- stliport_t *portp;
- int brdnr, portnr, totalport;
+ struct stlibrd *brdp;
+ struct stliport *portp;
+ unsigned int brdnr, portnr, totalport;
int curoff, maxoff;
char *pos;
* entry point)
*/
-static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
{
cdkhdr_t __iomem *hdrp;
cdkctrl_t __iomem *cp;
spin_unlock_irqrestore(&brd_lock, flags);
}
-static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
{
unsigned long flags;
* more chars to unload.
*/
-static void stli_read(stlibrd_t *brdp, stliport_t *portp)
+static void stli_read(struct stlibrd *brdp, struct stliport *portp)
{
cdkasyrq_t __iomem *rp;
char __iomem *shbuf;
while (len > 0) {
unsigned char *cptr;
- stlen = MIN(len, stlen);
+ stlen = min(len, stlen);
tty_prepare_flip_string(tty, &cptr, stlen);
memcpy_fromio(cptr, shbuf + tail, stlen);
len -= stlen;
* difficult to deal with them here.
*/
-static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp)
+static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp)
{
int cmd;
* then port is still busy, otherwise no longer busy.
*/
-static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp)
+static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp)
{
cdkasy_t __iomem *ap;
cdkctrl_t __iomem *cp;
* at the cdk header structure.
*/
-static void stli_brdpoll(stlibrd_t *brdp, cdkhdr_t __iomem *hdrp)
+static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp)
{
- stliport_t *portp;
+ struct stliport *portp;
unsigned char hostbits[(STL_MAXCHANS / 8) + 1];
unsigned char slavebits[(STL_MAXCHANS / 8) + 1];
unsigned char __iomem *slavep;
static void stli_poll(unsigned long arg)
{
cdkhdr_t __iomem *hdrp;
- stlibrd_t *brdp;
- int brdnr;
+ struct stlibrd *brdp;
+ unsigned int brdnr;
- stli_timerlist.expires = STLI_TIMEOUT;
- add_timer(&stli_timerlist);
+ mod_timer(&stli_timerlist, STLI_TIMEOUT);
/*
* Check each board and do any servicing required.
* the slave.
*/
-static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp)
+static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp)
{
memset(pp, 0, sizeof(asyport_t));
* we need to do here is set up the appropriate per port data structures.
*/
-static int stli_initports(stlibrd_t *brdp)
+static int stli_initports(struct stlibrd *brdp)
{
- stliport_t *portp;
- int i, panelnr, panelport;
+ struct stliport *portp;
+ unsigned int i, panelnr, panelport;
for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
- portp = kzalloc(sizeof(stliport_t), GFP_KERNEL);
+ portp = kzalloc(sizeof(struct stliport), GFP_KERNEL);
if (!portp) {
printk("STALLION: failed to allocate port structure\n");
continue;
* All the following routines are board specific hardware operations.
*/
-static void stli_ecpinit(stlibrd_t *brdp)
+static void stli_ecpinit(struct stlibrd *brdp)
{
unsigned long memconf;
/*****************************************************************************/
-static void stli_ecpenable(stlibrd_t *brdp)
+static void stli_ecpenable(struct stlibrd *brdp)
{
outb(ECP_ATENABLE, (brdp->iobase + ECP_ATCONFR));
}
/*****************************************************************************/
-static void stli_ecpdisable(stlibrd_t *brdp)
+static void stli_ecpdisable(struct stlibrd *brdp)
{
outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
}
/*****************************************************************************/
-static void __iomem *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
/*****************************************************************************/
-static void stli_ecpreset(stlibrd_t *brdp)
+static void stli_ecpreset(struct stlibrd *brdp)
{
outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR));
udelay(10);
/*****************************************************************************/
-static void stli_ecpintr(stlibrd_t *brdp)
+static void stli_ecpintr(struct stlibrd *brdp)
{
outb(0x1, brdp->iobase);
}
* The following set of functions act on ECP EISA boards.
*/
-static void stli_ecpeiinit(stlibrd_t *brdp)
+static void stli_ecpeiinit(struct stlibrd *brdp)
{
unsigned long memconf;
/*****************************************************************************/
-static void stli_ecpeienable(stlibrd_t *brdp)
+static void stli_ecpeienable(struct stlibrd *brdp)
{
outb(ECP_EIENABLE, (brdp->iobase + ECP_EICONFR));
}
/*****************************************************************************/
-static void stli_ecpeidisable(stlibrd_t *brdp)
+static void stli_ecpeidisable(struct stlibrd *brdp)
{
outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
}
/*****************************************************************************/
-static void __iomem *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
/*****************************************************************************/
-static void stli_ecpeireset(stlibrd_t *brdp)
+static void stli_ecpeireset(struct stlibrd *brdp)
{
outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR));
udelay(10);
* The following set of functions act on ECP MCA boards.
*/
-static void stli_ecpmcenable(stlibrd_t *brdp)
+static void stli_ecpmcenable(struct stlibrd *brdp)
{
outb(ECP_MCENABLE, (brdp->iobase + ECP_MCCONFR));
}
/*****************************************************************************/
-static void stli_ecpmcdisable(stlibrd_t *brdp)
+static void stli_ecpmcdisable(struct stlibrd *brdp)
{
outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR));
}
/*****************************************************************************/
-static void __iomem *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
/*****************************************************************************/
-static void stli_ecpmcreset(stlibrd_t *brdp)
+static void stli_ecpmcreset(struct stlibrd *brdp)
{
outb(ECP_MCSTOP, (brdp->iobase + ECP_MCCONFR));
udelay(10);
* The following set of functions act on ECP PCI boards.
*/
-static void stli_ecppciinit(stlibrd_t *brdp)
+static void stli_ecppciinit(struct stlibrd *brdp)
{
outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR));
udelay(10);
/*****************************************************************************/
-static void __iomem *stli_ecppcigetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
/*****************************************************************************/
-static void stli_ecppcireset(stlibrd_t *brdp)
+static void stli_ecppcireset(struct stlibrd *brdp)
{
outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR));
udelay(10);
* The following routines act on ONboards.
*/
-static void stli_onbinit(stlibrd_t *brdp)
+static void stli_onbinit(struct stlibrd *brdp)
{
unsigned long memconf;
/*****************************************************************************/
-static void stli_onbenable(stlibrd_t *brdp)
+static void stli_onbenable(struct stlibrd *brdp)
{
outb((brdp->enabval | ONB_ATENABLE), (brdp->iobase + ONB_ATCONFR));
}
/*****************************************************************************/
-static void stli_onbdisable(stlibrd_t *brdp)
+static void stli_onbdisable(struct stlibrd *brdp)
{
outb((brdp->enabval | ONB_ATDISABLE), (brdp->iobase + ONB_ATCONFR));
}
/*****************************************************************************/
-static void __iomem *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
/*****************************************************************************/
-static void stli_onbreset(stlibrd_t *brdp)
+static void stli_onbreset(struct stlibrd *brdp)
{
outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR));
udelay(10);
* The following routines act on ONboard EISA.
*/
-static void stli_onbeinit(stlibrd_t *brdp)
+static void stli_onbeinit(struct stlibrd *brdp)
{
unsigned long memconf;
/*****************************************************************************/
-static void stli_onbeenable(stlibrd_t *brdp)
+static void stli_onbeenable(struct stlibrd *brdp)
{
outb(ONB_EIENABLE, (brdp->iobase + ONB_EICONFR));
}
/*****************************************************************************/
-static void stli_onbedisable(stlibrd_t *brdp)
+static void stli_onbedisable(struct stlibrd *brdp)
{
outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
}
/*****************************************************************************/
-static void __iomem *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
/*****************************************************************************/
-static void stli_onbereset(stlibrd_t *brdp)
+static void stli_onbereset(struct stlibrd *brdp)
{
outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
udelay(10);
* The following routines act on Brumby boards.
*/
-static void stli_bbyinit(stlibrd_t *brdp)
+static void stli_bbyinit(struct stlibrd *brdp)
{
outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
udelay(10);
/*****************************************************************************/
-static void __iomem *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
void __iomem *ptr;
unsigned char val;
/*****************************************************************************/
-static void stli_bbyreset(stlibrd_t *brdp)
+static void stli_bbyreset(struct stlibrd *brdp)
{
outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
udelay(10);
* The following routines act on original old Stallion boards.
*/
-static void stli_stalinit(stlibrd_t *brdp)
+static void stli_stalinit(struct stlibrd *brdp)
{
outb(0x1, brdp->iobase);
mdelay(1000);
/*****************************************************************************/
-static void __iomem *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
{
BUG_ON(offset > brdp->memsize);
return brdp->membase + (offset % STAL_PAGESIZE);
/*****************************************************************************/
-static void stli_stalreset(stlibrd_t *brdp)
+static void stli_stalreset(struct stlibrd *brdp)
{
u32 __iomem *vecp;
* board types.
*/
-static int stli_initecp(stlibrd_t *brdp)
+static int stli_initecp(struct stlibrd *brdp)
{
cdkecpsig_t sig;
cdkecpsig_t __iomem *sigsp;
unsigned int status, nxtid;
char *name;
- int panelnr, nrports;
+ int retval, panelnr, nrports;
- if (!request_region(brdp->iobase, brdp->iosize, "istallion"))
- return -EIO;
-
- if ((brdp->iobase == 0) || (brdp->memaddr == 0))
- {
- release_region(brdp->iobase, brdp->iosize);
- return -ENODEV;
+ if ((brdp->iobase == 0) || (brdp->memaddr == 0)) {
+ retval = -ENODEV;
+ goto err;
+ }
+
+ if (!request_region(brdp->iobase, brdp->iosize, "istallion")) {
+ retval = -EIO;
+ goto err;
}
brdp->iosize = ECP_IOSIZE;
*/
switch (brdp->brdtype) {
case BRD_ECP:
- brdp->membase = (void *) brdp->memaddr;
brdp->memsize = ECP_MEMSIZE;
brdp->pagesize = ECP_ATPAGESIZE;
brdp->init = stli_ecpinit;
break;
case BRD_ECPE:
- brdp->membase = (void *) brdp->memaddr;
brdp->memsize = ECP_MEMSIZE;
brdp->pagesize = ECP_EIPAGESIZE;
brdp->init = stli_ecpeiinit;
break;
case BRD_ECPMC:
- brdp->membase = (void *) brdp->memaddr;
brdp->memsize = ECP_MEMSIZE;
brdp->pagesize = ECP_MCPAGESIZE;
brdp->init = NULL;
break;
case BRD_ECPPCI:
- brdp->membase = (void *) brdp->memaddr;
brdp->memsize = ECP_PCIMEMSIZE;
brdp->pagesize = ECP_PCIPAGESIZE;
brdp->init = stli_ecppciinit;
break;
default:
- release_region(brdp->iobase, brdp->iosize);
- return -EINVAL;
+ retval = -EINVAL;
+ goto err_reg;
}
/*
EBRDINIT(brdp);
brdp->membase = ioremap(brdp->memaddr, brdp->memsize);
- if (brdp->membase == NULL)
- {
- release_region(brdp->iobase, brdp->iosize);
- return -ENOMEM;
+ if (brdp->membase == NULL) {
+ retval = -ENOMEM;
+ goto err_reg;
}
/*
memcpy_fromio(&sig, sigsp, sizeof(cdkecpsig_t));
EBRDDISABLE(brdp);
- if (sig.magic != cpu_to_le32(ECP_MAGIC))
- {
- release_region(brdp->iobase, brdp->iosize);
- iounmap(brdp->membase);
- brdp->membase = NULL;
- return -ENODEV;
+ if (sig.magic != cpu_to_le32(ECP_MAGIC)) {
+ retval = -ENODEV;
+ goto err_unmap;
}
/*
brdp->state |= BST_FOUND;
return 0;
+err_unmap:
+ iounmap(brdp->membase);
+ brdp->membase = NULL;
+err_reg:
+ release_region(brdp->iobase, brdp->iosize);
+err:
+ return retval;
}
/*****************************************************************************/
* This handles only these board types.
*/
-static int stli_initonb(stlibrd_t *brdp)
+static int stli_initonb(struct stlibrd *brdp)
{
cdkonbsig_t sig;
cdkonbsig_t __iomem *sigsp;
char *name;
- int i;
+ int i, retval;
/*
* Do a basic sanity check on the IO and memory addresses.
*/
- if (brdp->iobase == 0 || brdp->memaddr == 0)
- return -ENODEV;
+ if (brdp->iobase == 0 || brdp->memaddr == 0) {
+ retval = -ENODEV;
+ goto err;
+ }
brdp->iosize = ONB_IOSIZE;
- if (!request_region(brdp->iobase, brdp->iosize, "istallion"))
- return -EIO;
+ if (!request_region(brdp->iobase, brdp->iosize, "istallion")) {
+ retval = -EIO;
+ goto err;
+ }
/*
* Based on the specific board type setup the common vars to access
*/
switch (brdp->brdtype) {
case BRD_ONBOARD:
- case BRD_ONBOARD32:
case BRD_ONBOARD2:
- case BRD_ONBOARD2_32:
- case BRD_ONBOARDRS:
brdp->memsize = ONB_MEMSIZE;
brdp->pagesize = ONB_ATPAGESIZE;
brdp->init = stli_onbinit;
break;
case BRD_BRUMBY4:
- case BRD_BRUMBY8:
- case BRD_BRUMBY16:
brdp->memsize = BBY_MEMSIZE;
brdp->pagesize = BBY_PAGESIZE;
brdp->init = stli_bbyinit;
break;
default:
- release_region(brdp->iobase, brdp->iosize);
- return -EINVAL;
+ retval = -EINVAL;
+ goto err_reg;
}
/*
EBRDINIT(brdp);
brdp->membase = ioremap(brdp->memaddr, brdp->memsize);
- if (brdp->membase == NULL)
- {
- release_region(brdp->iobase, brdp->iosize);
- return -ENOMEM;
+ if (brdp->membase == NULL) {
+ retval = -ENOMEM;
+ goto err_reg;
}
/*
if (sig.magic0 != cpu_to_le16(ONB_MAGIC0) ||
sig.magic1 != cpu_to_le16(ONB_MAGIC1) ||
sig.magic2 != cpu_to_le16(ONB_MAGIC2) ||
- sig.magic3 != cpu_to_le16(ONB_MAGIC3))
- {
- release_region(brdp->iobase, brdp->iosize);
- iounmap(brdp->membase);
- brdp->membase = NULL;
- return -ENODEV;
+ sig.magic3 != cpu_to_le16(ONB_MAGIC3)) {
+ retval = -ENODEV;
+ goto err_unmap;
}
/*
brdp->state |= BST_FOUND;
return 0;
+err_unmap:
+ iounmap(brdp->membase);
+ brdp->membase = NULL;
+err_reg:
+ release_region(brdp->iobase, brdp->iosize);
+err:
+ return retval;
}
/*****************************************************************************/
* read in the memory map, and get the show on the road...
*/
-static int stli_startbrd(stlibrd_t *brdp)
+static int stli_startbrd(struct stlibrd *brdp)
{
cdkhdr_t __iomem *hdrp;
cdkmem_t __iomem *memp;
cdkasy_t __iomem *ap;
unsigned long flags;
- stliport_t *portp;
- int portnr, nrdevs, i, rc = 0;
+ unsigned int portnr, nrdevs, i;
+ struct stliport *portp;
+ int rc = 0;
u32 memoff;
spin_lock_irqsave(&brd_lock, flags);
if (! stli_timeron) {
stli_timeron++;
- stli_timerlist.expires = STLI_TIMEOUT;
- add_timer(&stli_timerlist);
+ mod_timer(&stli_timerlist, STLI_TIMEOUT);
}
return rc;
* Probe and initialize the specified board.
*/
-static int __init stli_brdinit(stlibrd_t *brdp)
+static int __devinit stli_brdinit(struct stlibrd *brdp)
{
- stli_brds[brdp->brdnr] = brdp;
+ int retval;
switch (brdp->brdtype) {
case BRD_ECP:
case BRD_ECPE:
case BRD_ECPMC:
case BRD_ECPPCI:
- stli_initecp(brdp);
+ retval = stli_initecp(brdp);
break;
case BRD_ONBOARD:
case BRD_ONBOARDE:
case BRD_ONBOARD2:
- case BRD_ONBOARD32:
- case BRD_ONBOARD2_32:
- case BRD_ONBOARDRS:
case BRD_BRUMBY4:
- case BRD_BRUMBY8:
- case BRD_BRUMBY16:
case BRD_STALLION:
- stli_initonb(brdp);
+ retval = stli_initonb(brdp);
break;
- case BRD_EASYIO:
- case BRD_ECH:
- case BRD_ECHMC:
- case BRD_ECHPCI:
- printk(KERN_ERR "STALLION: %s board type not supported in "
- "this driver\n", stli_brdnames[brdp->brdtype]);
- return -ENODEV;
default:
printk(KERN_ERR "STALLION: board=%d is unknown board "
"type=%d\n", brdp->brdnr, brdp->brdtype);
- return -ENODEV;
+ retval = -ENODEV;
}
- if ((brdp->state & BST_FOUND) == 0) {
- printk(KERN_ERR "STALLION: %s board not found, board=%d "
- "io=%x mem=%x\n",
- stli_brdnames[brdp->brdtype], brdp->brdnr,
- brdp->iobase, (int) brdp->memaddr);
- return -ENODEV;
- }
+ if (retval)
+ return retval;
stli_initports(brdp);
printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x "
return 0;
}
+#if STLI_EISAPROBE != 0
/*****************************************************************************/
/*
* might be. This is a bit if hack, but it is the best we can do.
*/
-static int stli_eisamemprobe(stlibrd_t *brdp)
+static int stli_eisamemprobe(struct stlibrd *brdp)
{
cdkecpsig_t ecpsig, __iomem *ecpsigp;
cdkonbsig_t onbsig, __iomem *onbsigp;
}
return 0;
}
+#endif
static int stli_getbrdnr(void)
{
- int i;
+ unsigned int i;
for (i = 0; i < STL_MAXBRDS; i++) {
if (!stli_brds[i]) {
return -1;
}
+#if STLI_EISAPROBE != 0
/*****************************************************************************/
/*
static int stli_findeisabrds(void)
{
- stlibrd_t *brdp;
- unsigned int iobase, eid;
- int i;
+ struct stlibrd *brdp;
+ unsigned int iobase, eid, i;
+ int brdnr, found = 0;
/*
* Firstly check if this is an EISA system. If this is not an EISA system then
* Allocate a board structure and initialize it.
*/
if ((brdp = stli_allocbrd()) == NULL)
- return -ENOMEM;
- if ((brdp->brdnr = stli_getbrdnr()) < 0)
- return -ENOMEM;
+ return found ? : -ENOMEM;
+ brdnr = stli_getbrdnr();
+ if (brdnr < 0)
+ return found ? : -ENOMEM;
+ brdp->brdnr = (unsigned int)brdnr;
eid = inb(iobase + 0xc82);
if (eid == ECP_EISAID)
brdp->brdtype = BRD_ECPE;
outb(0x1, (iobase + 0xc84));
if (stli_eisamemprobe(brdp))
outb(0, (iobase + 0xc84));
- stli_brdinit(brdp);
+ if (stli_brdinit(brdp) < 0) {
+ kfree(brdp);
+ continue;
+ }
+
+ stli_brds[brdp->brdnr] = brdp;
+ found++;
+
+ for (i = 0; i < brdp->nrports; i++)
+ tty_register_device(stli_serial,
+ brdp->brdnr * STL_MAXPORTS + i, NULL);
}
- return 0;
+ return found;
}
+#else
+static inline int stli_findeisabrds(void) { return 0; }
+#endif
/*****************************************************************************/
/*****************************************************************************/
-#ifdef CONFIG_PCI
-
/*
* We have a Stallion board. Allocate a board structure and
* initialize it. Read its IO and MEMORY resources from PCI
* configuration space.
*/
-static int stli_initpcibrd(int brdtype, struct pci_dev *devp)
+static int __devinit stli_pciprobe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
- stlibrd_t *brdp;
-
- if (pci_enable_device(devp))
- return -EIO;
- if ((brdp = stli_allocbrd()) == NULL)
- return -ENOMEM;
- if ((brdp->brdnr = stli_getbrdnr()) < 0) {
+ struct stlibrd *brdp;
+ unsigned int i;
+ int brdnr, retval = -EIO;
+
+ retval = pci_enable_device(pdev);
+ if (retval)
+ goto err;
+ brdp = stli_allocbrd();
+ if (brdp == NULL) {
+ retval = -ENOMEM;
+ goto err;
+ }
+ mutex_lock(&stli_brdslock);
+ brdnr = stli_getbrdnr();
+ if (brdnr < 0) {
printk(KERN_INFO "STALLION: too many boards found, "
"maximum supported %d\n", STL_MAXBRDS);
- return 0;
+ mutex_unlock(&stli_brdslock);
+ retval = -EIO;
+ goto err_fr;
}
- brdp->brdtype = brdtype;
+ brdp->brdnr = (unsigned int)brdnr;
+ stli_brds[brdp->brdnr] = brdp;
+ mutex_unlock(&stli_brdslock);
+ brdp->brdtype = BRD_ECPPCI;
/*
* We have all resources from the board, so lets setup the actual
* board structure now.
*/
- brdp->iobase = pci_resource_start(devp, 3);
- brdp->memaddr = pci_resource_start(devp, 2);
- stli_brdinit(brdp);
+ brdp->iobase = pci_resource_start(pdev, 3);
+ brdp->memaddr = pci_resource_start(pdev, 2);
+ retval = stli_brdinit(brdp);
+ if (retval)
+ goto err_null;
+
+ brdp->state |= BST_PROBED;
+ pci_set_drvdata(pdev, brdp);
+
+ EBRDENABLE(brdp);
+ brdp->enable = NULL;
+ brdp->disable = NULL;
+
+ for (i = 0; i < brdp->nrports; i++)
+ tty_register_device(stli_serial, brdp->brdnr * STL_MAXPORTS + i,
+ &pdev->dev);
return 0;
+err_null:
+ stli_brds[brdp->brdnr] = NULL;
+err_fr:
+ kfree(brdp);
+err:
+ return retval;
}
-/*****************************************************************************/
+static void stli_pciremove(struct pci_dev *pdev)
+{
+ struct stlibrd *brdp = pci_get_drvdata(pdev);
-/*
- * Find all Stallion PCI boards that might be installed. Initialize each
- * one as it is found.
- */
+ stli_cleanup_ports(brdp);
-static int stli_findpcibrds(void)
-{
- struct pci_dev *dev = NULL;
+ iounmap(brdp->membase);
+ if (brdp->iosize > 0)
+ release_region(brdp->iobase, brdp->iosize);
- while ((dev = pci_get_device(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA, dev))) {
- stli_initpcibrd(BRD_ECPPCI, dev);
- }
- return 0;
+ stli_brds[brdp->brdnr] = NULL;
+ kfree(brdp);
}
-#endif
-
+static struct pci_driver stli_pcidriver = {
+ .name = "istallion",
+ .id_table = istallion_pci_tbl,
+ .probe = stli_pciprobe,
+ .remove = __devexit_p(stli_pciremove)
+};
/*****************************************************************************/
/*
* Allocate a new board structure. Fill out the basic info in it.
*/
-static stlibrd_t *stli_allocbrd(void)
+static struct stlibrd *stli_allocbrd(void)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
- brdp = kzalloc(sizeof(stlibrd_t), GFP_KERNEL);
+ brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL);
if (!brdp) {
printk(KERN_ERR "STALLION: failed to allocate memory "
- "(size=%Zd)\n", sizeof(stlibrd_t));
+ "(size=%Zd)\n", sizeof(struct stlibrd));
return NULL;
}
brdp->magic = STLI_BOARDMAGIC;
static int stli_initbrds(void)
{
- stlibrd_t *brdp, *nxtbrdp;
- stlconf_t *confp;
- int i, j;
-
- if (stli_nrbrds > STL_MAXBRDS) {
- printk(KERN_INFO "STALLION: too many boards in configuration "
- "table, truncating to %d\n", STL_MAXBRDS);
- stli_nrbrds = STL_MAXBRDS;
- }
+ struct stlibrd *brdp, *nxtbrdp;
+ struct stlconf conf;
+ unsigned int i, j, found = 0;
+ int retval;
-/*
- * Firstly scan the list of static boards configured. Allocate
- * resources and initialize the boards as found. If this is a
- * module then let the module args override static configuration.
- */
- for (i = 0; (i < stli_nrbrds); i++) {
- confp = &stli_brdconf[i];
- stli_parsebrd(confp, stli_brdsp[i]);
+ for (stli_nrbrds = 0; stli_nrbrds < ARRAY_SIZE(stli_brdsp);
+ stli_nrbrds++) {
+ memset(&conf, 0, sizeof(conf));
+ if (stli_parsebrd(&conf, stli_brdsp[stli_nrbrds]) == 0)
+ continue;
if ((brdp = stli_allocbrd()) == NULL)
- return -ENOMEM;
- brdp->brdnr = i;
- brdp->brdtype = confp->brdtype;
- brdp->iobase = confp->ioaddr1;
- brdp->memaddr = confp->memaddr;
- stli_brdinit(brdp);
+ continue;
+ brdp->brdnr = stli_nrbrds;
+ brdp->brdtype = conf.brdtype;
+ brdp->iobase = conf.ioaddr1;
+ brdp->memaddr = conf.memaddr;
+ if (stli_brdinit(brdp) < 0) {
+ kfree(brdp);
+ continue;
+ }
+ stli_brds[brdp->brdnr] = brdp;
+ found++;
+
+ for (i = 0; i < brdp->nrports; i++)
+ tty_register_device(stli_serial,
+ brdp->brdnr * STL_MAXPORTS + i, NULL);
}
-/*
- * Static configuration table done, so now use dynamic methods to
- * see if any more boards should be configured.
- */
- stli_argbrds();
- if (STLI_EISAPROBE)
- stli_findeisabrds();
-#ifdef CONFIG_PCI
- stli_findpcibrds();
-#endif
+ retval = stli_findeisabrds();
+ if (retval > 0)
+ found += retval;
/*
* All found boards are initialized. Now for a little optimization, if
}
}
+ retval = pci_register_driver(&stli_pcidriver);
+ if (retval && found == 0) {
+ printk(KERN_ERR "Neither isa nor eisa cards found nor pci "
+ "driver can be registered!\n");
+ goto err;
+ }
+
return 0;
+err:
+ return retval;
}
/*****************************************************************************/
{
unsigned long flags;
void __iomem *memptr;
- stlibrd_t *brdp;
- int brdnr, size, n;
+ struct stlibrd *brdp;
+ unsigned int brdnr;
+ int size, n;
void *p;
loff_t off = *offp;
- brdnr = iminor(fp->f_dentry->d_inode);
+ brdnr = iminor(fp->f_path.dentry->d_inode);
if (brdnr >= stli_nrbrds)
return -ENODEV;
brdp = stli_brds[brdnr];
if (off >= brdp->memsize || off + count < off)
return 0;
- size = MIN(count, (brdp->memsize - off));
+ size = min(count, (size_t)(brdp->memsize - off));
/*
* Copy the data a page at a time
spin_lock_irqsave(&brd_lock, flags);
EBRDENABLE(brdp);
memptr = EBRDGETMEMPTR(brdp, off);
- n = MIN(size, (brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
- n = MIN(n, PAGE_SIZE);
+ n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
+ n = min(n, (int)PAGE_SIZE);
memcpy_fromio(p, memptr, n);
EBRDDISABLE(brdp);
spin_unlock_irqrestore(&brd_lock, flags);
{
unsigned long flags;
void __iomem *memptr;
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
char __user *chbuf;
- int brdnr, size, n;
+ unsigned int brdnr;
+ int size, n;
void *p;
loff_t off = *offp;
- brdnr = iminor(fp->f_dentry->d_inode);
+ brdnr = iminor(fp->f_path.dentry->d_inode);
if (brdnr >= stli_nrbrds)
return -ENODEV;
return 0;
chbuf = (char __user *) buf;
- size = MIN(count, (brdp->memsize - off));
+ size = min(count, (size_t)(brdp->memsize - off));
/*
* Copy the data a page at a time
return -ENOMEM;
while (size > 0) {
- n = MIN(size, (brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
- n = MIN(n, PAGE_SIZE);
+ n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
+ n = min(n, (int)PAGE_SIZE);
if (copy_from_user(p, chbuf, n)) {
if (count == 0)
count = -EFAULT;
static int stli_getbrdstats(combrd_t __user *bp)
{
- stlibrd_t *brdp;
- int i;
+ struct stlibrd *brdp;
+ unsigned int i;
if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t)))
return -EFAULT;
* Resolve the referenced port number into a port struct pointer.
*/
-static stliport_t *stli_getport(int brdnr, int panelnr, int portnr)
+static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr,
+ unsigned int portnr)
{
- stlibrd_t *brdp;
- int i;
+ struct stlibrd *brdp;
+ unsigned int i;
- if (brdnr < 0 || brdnr >= STL_MAXBRDS)
+ if (brdnr >= STL_MAXBRDS)
return NULL;
brdp = stli_brds[brdnr];
if (brdp == NULL)
return NULL;
for (i = 0; (i < panelnr); i++)
portnr += brdp->panels[i];
- if ((portnr < 0) || (portnr >= brdp->nrports))
+ if (portnr >= brdp->nrports)
return NULL;
return brdp->ports[portnr];
}
* what port to get stats for (used through board control device).
*/
-static int stli_portcmdstats(stliport_t *portp)
+static int stli_portcmdstats(struct stliport *portp)
{
unsigned long flags;
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int rc;
memset(&stli_comstats, 0, sizeof(comstats_t));
* what port to get stats for (used through board control device).
*/
-static int stli_getportstats(stliport_t *portp, comstats_t __user *cp)
+static int stli_getportstats(struct stliport *portp, comstats_t __user *cp)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int rc;
if (!portp) {
* Clear the port stats structure. We also return it zeroed out...
*/
-static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp)
+static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int rc;
if (!portp) {
* Return the entire driver ports structure to a user app.
*/
-static int stli_getportstruct(stliport_t __user *arg)
+static int stli_getportstruct(struct stliport __user *arg)
{
- stliport_t *portp;
+ struct stliport stli_dummyport;
+ struct stliport *portp;
- if (copy_from_user(&stli_dummyport, arg, sizeof(stliport_t)))
+ if (copy_from_user(&stli_dummyport, arg, sizeof(struct stliport)))
return -EFAULT;
portp = stli_getport(stli_dummyport.brdnr, stli_dummyport.panelnr,
stli_dummyport.portnr);
if (!portp)
return -ENODEV;
- if (copy_to_user(arg, portp, sizeof(stliport_t)))
+ if (copy_to_user(arg, portp, sizeof(struct stliport)))
return -EFAULT;
return 0;
}
* Return the entire driver board structure to a user app.
*/
-static int stli_getbrdstruct(stlibrd_t __user *arg)
+static int stli_getbrdstruct(struct stlibrd __user *arg)
{
- stlibrd_t *brdp;
+ struct stlibrd stli_dummybrd;
+ struct stlibrd *brdp;
- if (copy_from_user(&stli_dummybrd, arg, sizeof(stlibrd_t)))
+ if (copy_from_user(&stli_dummybrd, arg, sizeof(struct stlibrd)))
return -EFAULT;
- if ((stli_dummybrd.brdnr < 0) || (stli_dummybrd.brdnr >= STL_MAXBRDS))
+ if (stli_dummybrd.brdnr >= STL_MAXBRDS)
return -ENODEV;
brdp = stli_brds[stli_dummybrd.brdnr];
if (!brdp)
return -ENODEV;
- if (copy_to_user(arg, brdp, sizeof(stlibrd_t)))
+ if (copy_to_user(arg, brdp, sizeof(struct stlibrd)))
return -EFAULT;
return 0;
}
static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg)
{
- stlibrd_t *brdp;
+ struct stlibrd *brdp;
int brdnr, rc, done;
void __user *argp = (void __user *)arg;
};
/*****************************************************************************/
+/*
+ * Loadable module initialization stuff.
+ */
+
+static void istallion_cleanup_isa(void)
+{
+ struct stlibrd *brdp;
+ unsigned int j;
+
+ for (j = 0; (j < stli_nrbrds); j++) {
+ if ((brdp = stli_brds[j]) == NULL || (brdp->state & BST_PROBED))
+ continue;
+
+ stli_cleanup_ports(brdp);
-static int __init stli_init(void)
+ iounmap(brdp->membase);
+ if (brdp->iosize > 0)
+ release_region(brdp->iobase, brdp->iosize);
+ kfree(brdp);
+ stli_brds[j] = NULL;
+ }
+}
+
+static int __init istallion_module_init(void)
{
- int i;
+ unsigned int i;
+ int retval;
+
printk(KERN_INFO "%s: version %s\n", stli_drvtitle, stli_drvversion);
spin_lock_init(&stli_lock);
spin_lock_init(&brd_lock);
- stli_initbrds();
-
- stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
- if (!stli_serial)
- return -ENOMEM;
-
-/*
- * Allocate a temporary write buffer.
- */
stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
- if (!stli_txcookbuf)
+ if (!stli_txcookbuf) {
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
+ retval = -ENOMEM;
+ goto err;
+ }
-/*
- * Set up a character driver for the shared memory region. We need this
- * to down load the slave code image. Also it is a useful debugging tool.
- */
- if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem))
- printk(KERN_ERR "STALLION: failed to register serial memory "
- "device\n");
-
- istallion_class = class_create(THIS_MODULE, "staliomem");
- for (i = 0; i < 4; i++)
- class_device_create(istallion_class, NULL,
- MKDEV(STL_SIOMEMMAJOR, i),
- NULL, "staliomem%d", i);
+ stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
+ if (!stli_serial) {
+ retval = -ENOMEM;
+ goto err_free;
+ }
-/*
- * Set up the tty driver structure and register us as a driver.
- */
stli_serial->owner = THIS_MODULE;
stli_serial->driver_name = stli_drvname;
stli_serial->name = stli_serialname;
stli_serial->type = TTY_DRIVER_TYPE_SERIAL;
stli_serial->subtype = SERIAL_TYPE_NORMAL;
stli_serial->init_termios = stli_deftermios;
- stli_serial->flags = TTY_DRIVER_REAL_RAW;
+ stli_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
tty_set_operations(stli_serial, &stli_ops);
- if (tty_register_driver(stli_serial)) {
- put_tty_driver(stli_serial);
+ retval = tty_register_driver(stli_serial);
+ if (retval) {
printk(KERN_ERR "STALLION: failed to register serial driver\n");
- return -EBUSY;
+ goto err_ttyput;
}
+
+ retval = stli_initbrds();
+ if (retval)
+ goto err_ttyunr;
+
+/*
+ * Set up a character driver for the shared memory region. We need this
+ * to down load the slave code image. Also it is a useful debugging tool.
+ */
+ retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem);
+ if (retval) {
+ printk(KERN_ERR "STALLION: failed to register serial memory "
+ "device\n");
+ goto err_deinit;
+ }
+
+ istallion_class = class_create(THIS_MODULE, "staliomem");
+ for (i = 0; i < 4; i++)
+ class_device_create(istallion_class, NULL,
+ MKDEV(STL_SIOMEMMAJOR, i),
+ NULL, "staliomem%d", i);
+
return 0;
+err_deinit:
+ pci_unregister_driver(&stli_pcidriver);
+ istallion_cleanup_isa();
+err_ttyunr:
+ tty_unregister_driver(stli_serial);
+err_ttyput:
+ put_tty_driver(stli_serial);
+err_free:
+ kfree(stli_txcookbuf);
+err:
+ return retval;
}
/*****************************************************************************/
+
+static void __exit istallion_module_exit(void)
+{
+ unsigned int j;
+
+ printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle,
+ stli_drvversion);
+
+ if (stli_timeron) {
+ stli_timeron = 0;
+ del_timer_sync(&stli_timerlist);
+ }
+
+ unregister_chrdev(STL_SIOMEMMAJOR, "staliomem");
+
+ for (j = 0; j < 4; j++)
+ class_device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR,
+ j));
+ class_destroy(istallion_class);
+
+ pci_unregister_driver(&stli_pcidriver);
+ istallion_cleanup_isa();
+
+ tty_unregister_driver(stli_serial);
+ put_tty_driver(stli_serial);
+
+ kfree(stli_txcookbuf);
+}
+
+module_init(istallion_module_init);
+module_exit(istallion_module_exit);
static void k_cur(struct vc_data *vc, unsigned char value, char up_flag)
{
- static const char *cur_chars = "BDCA";
+ static const char cur_chars[] = "BDCA";
if (up_flag)
return;
(&display, (struct lcd_display *) arg,
sizeof(struct lcd_display)))
return -EFAULT;
- rom = (unsigned char *) kmalloc((128), GFP_ATOMIC);
+ rom = kmalloc((128), GFP_ATOMIC);
if (rom == NULL) {
printk(KERN_ERR LCD "kmalloc() failed in %s\n",
__FUNCTION__);
static ssize_t lp_write(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
- unsigned int minor = iminor(file->f_dentry->d_inode);
+ unsigned int minor = iminor(file->f_path.dentry->d_inode);
struct parport *port = lp_table[minor].dev->port;
char *kbuf = lp_table[minor].lp_buffer;
ssize_t retv = 0;
size_t count, loff_t *ppos)
{
DEFINE_WAIT(wait);
- unsigned int minor=iminor(file->f_dentry->d_inode);
+ unsigned int minor=iminor(file->f_path.dentry->d_inode);
struct parport *port = lp_table[minor].dev->port;
ssize_t retval = 0;
char *kbuf = lp_table[minor].lp_buffer;
return -EIO;
}
}
- lp_table[minor].lp_buffer = (char *) kmalloc(LP_BUFFER_SIZE, GFP_KERNEL);
+ lp_table[minor].lp_buffer = kmalloc(LP_BUFFER_SIZE, GFP_KERNEL);
if (!lp_table[minor].lp_buffer) {
LP_F(minor) &= ~LP_BUSY;
return -ENOMEM;
count = size;
zap_page_range(vma, addr, count, NULL);
- zeromap_page_range(vma, addr, count, PAGE_COPY);
+ if (zeromap_page_range(vma, addr, count, PAGE_COPY))
+ break;
size -= count;
buf += count;
static int mmap_zero(struct file * file, struct vm_area_struct * vma)
{
+ int err;
+
if (vma->vm_flags & VM_SHARED)
return shmem_zero_setup(vma);
- if (zeromap_page_range(vma, vma->vm_start, vma->vm_end - vma->vm_start, vma->vm_page_prot))
- return -EAGAIN;
- return 0;
+ err = zeromap_page_range(vma, vma->vm_start,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+ BUG_ON(err == -EEXIST);
+ return err;
}
#else /* CONFIG_MMU */
static ssize_t read_zero(struct file * file, char * buf,
{
loff_t ret;
- mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
switch (orig) {
case 0:
file->f_pos = offset;
default:
ret = -EINVAL;
}
- mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
return ret;
}
static int moxa_ioctl(struct tty_struct *, struct file *, unsigned int, unsigned long);
static void moxa_throttle(struct tty_struct *);
static void moxa_unthrottle(struct tty_struct *);
-static void moxa_set_termios(struct tty_struct *, struct termios *);
+static void moxa_set_termios(struct tty_struct *, struct ktermios *);
static void moxa_stop(struct tty_struct *);
static void moxa_start(struct tty_struct *);
static void moxa_hangup(struct tty_struct *);
static void MoxaPortDisable(int);
static long MoxaPortGetMaxBaud(int);
static long MoxaPortSetBaud(int, long);
-static int MoxaPortSetTermio(int, struct termios *, speed_t);
+static int MoxaPortSetTermio(int, struct ktermios *, speed_t);
static int MoxaPortGetLineOut(int, int *, int *);
static void MoxaPortLineCtrl(int, int, int);
static void MoxaPortFlowCtrl(int, int, int, int, int, int);
moxaDriver->init_termios.c_oflag = 0;
moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
moxaDriver->init_termios.c_lflag = 0;
+ moxaDriver->init_termios.c_ispeed = 9600;
+ moxaDriver->init_termios.c_ospeed = 9600;
moxaDriver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(moxaDriver, &moxa_ops);
}
static void moxa_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
static void set_tty_param(struct tty_struct *tty)
{
- register struct termios *ts;
+ register struct ktermios *ts;
struct moxa_str *ch;
int rts, cts, txflow, rxflow, xany;
static void receive_data(struct moxa_str *ch)
{
struct tty_struct *tp;
- struct termios *ts;
+ struct ktermios *ts;
unsigned long flags;
ts = NULL;
*
* Function 12: Configure the port.
* Syntax:
- * int MoxaPortSetTermio(int port, struct termios *termio, speed_t baud);
+ * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
* int port : port number (0 - 127)
- * struct termios * termio : termio structure pointer
+ * struct ktermios * termio : termio structure pointer
* speed_t baud : baud rate
*
* return: -1 : this port is invalid or termio == NULL
return (baud);
}
-int MoxaPortSetTermio(int port, struct termios *termio, speed_t baud)
+int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud)
{
void __iomem *ofsAddr;
tcflag_t cflag;
int xmit_tail;
int xmit_cnt;
struct work_struct tqueue;
- struct termios normal_termios;
- struct termios callout_termios;
+ struct ktermios normal_termios;
+ struct ktermios callout_termios;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
wait_queue_head_t delta_msr_wait;
static struct tty_driver *mxvar_sdriver;
static struct mxser_struct mxvar_table[MXSER_PORTS];
static struct tty_struct *mxvar_tty[MXSER_PORTS + 1];
-static struct termios *mxvar_termios[MXSER_PORTS + 1];
-static struct termios *mxvar_termios_locked[MXSER_PORTS + 1];
+static struct ktermios *mxvar_termios[MXSER_PORTS + 1];
+static struct ktermios *mxvar_termios_locked[MXSER_PORTS + 1];
static struct mxser_log mxvar_log;
static int mxvar_diagflag;
static unsigned char mxser_msr[MXSER_PORTS + 1];
static int mxser_ioctl_special(unsigned int, void __user *);
static void mxser_throttle(struct tty_struct *);
static void mxser_unthrottle(struct tty_struct *);
-static void mxser_set_termios(struct tty_struct *, struct termios *);
+static void mxser_set_termios(struct tty_struct *, struct ktermios *);
static void mxser_stop(struct tty_struct *);
static void mxser_start(struct tty_struct *);
static void mxser_hangup(struct tty_struct *);
static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *);
static int mxser_startup(struct mxser_struct *);
static void mxser_shutdown(struct mxser_struct *);
-static int mxser_change_speed(struct mxser_struct *, struct termios *old_termios);
+static int mxser_change_speed(struct mxser_struct *, struct ktermios *old_termios);
static int mxser_get_serial_info(struct mxser_struct *, struct serial_struct __user *);
static int mxser_set_serial_info(struct mxser_struct *, struct serial_struct __user *);
static int mxser_get_lsr_info(struct mxser_struct *, unsigned int __user *);
if (pdev != NULL) { /* PCI */
release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2));
release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3));
+ pci_dev_put(pdev);
} else {
release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports);
release_region(mxsercfg[i].vector, 1);
n = board * MXSER_PORTS_PER_BOARD;
info = &mxvar_table[n];
/*if (verbose) */ {
- printk(KERN_DEBUG " ttyM%d - ttyM%d ",
+ printk(KERN_DEBUG " ttyMI%d - ttyMI%d ",
n, n + hwconf->ports - 1);
printk(" max. baud rate = %d bps.\n",
hwconf->MaxCanSetBaudRate[0]);
/* Initialize the tty_driver structure */
memset(mxvar_sdriver, 0, sizeof(struct tty_driver));
mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
- mxvar_sdriver->name = "ttyM";
+ mxvar_sdriver->name = "ttyMI";
mxvar_sdriver->major = ttymajor;
mxvar_sdriver->minor_start = 0;
mxvar_sdriver->num = MXSER_PORTS + 1;
mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
mxvar_sdriver->init_termios = tty_std_termios;
mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
+ mxvar_sdriver->init_termios.c_ispeed = 9600;
+ mxvar_sdriver->init_termios.c_ospeed = 9600;
mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(mxvar_sdriver, &mxser_ops);
mxvar_sdriver->ttys = mxvar_tty;
index = 0;
b = 0;
while (b < n) {
- pdev = pci_find_device(mxser_pcibrds[b].vendor,
+ pdev = pci_get_device(mxser_pcibrds[b].vendor,
mxser_pcibrds[b].device, pdev);
- if (pdev == NULL) {
+ if (pdev == NULL) {
b++;
continue;
}
if (mxser_initbrd(m, &hwconf) < 0)
continue;
m++;
+ /* Keep an extra reference if we succeeded. It will
+ be returned at unload time */
+ pci_dev_get(pdev);
}
}
#endif
mxser_change_speed(info, NULL);
}
- info->session = current->signal->session;
+ info->session = process_session(current);
info->pgrp = process_group(current);
/*
/* MX_UNLOCK(&info->slock); */
}
-static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct mxser_struct *info = tty->driver_data;
unsigned long flags;
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
-static int mxser_change_speed(struct mxser_struct *info, struct termios *old_termios)
+static int mxser_change_speed(struct mxser_struct *info, struct ktermios *old_termios)
{
unsigned cflag, cval, fcr;
int ret = 0;
--- /dev/null
+/*
+ * mxser.c -- MOXA Smartio/Industio family multiport serial driver.
+ *
+ * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com.tw).
+ * Copyright (C) 2006 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * This code is loosely based on the 1.8 moxa driver which is based on
+ * Linux serial driver, written by Linus Torvalds, Theodore T'so and
+ * others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
+ * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
+ * - Fixed x86_64 cleanness
+ * - Fixed sleep with spinlock held in mxser_send_break
+ */
+
+#include <linux/module.h>
+#include <linux/autoconf.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/gfp.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bitops.h>
+#include <asm/uaccess.h>
+
+#include "mxser_new.h"
+
+#define MXSER_VERSION "2.0"
+#define MXSERMAJOR 174
+#define MXSERCUMAJOR 175
+
+#define MXSER_EVENT_TXLOW 1
+
+#define MXSER_BOARDS 4 /* Max. boards */
+#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */
+#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
+#define MXSER_ISR_PASS_LIMIT 99999L
+
+#define MXSER_ERR_IOADDR -1
+#define MXSER_ERR_IRQ -2
+#define MXSER_ERR_IRQ_CONFLIT -3
+#define MXSER_ERR_VECTOR -4
+
+#define WAKEUP_CHARS 256
+
+#define UART_MCR_AFE 0x20
+#define UART_LSR_SPECIAL 0x1E
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|\
+ IXON|IXOFF))
+
+#define C168_ASIC_ID 1
+#define C104_ASIC_ID 2
+#define C102_ASIC_ID 0xB
+#define CI132_ASIC_ID 4
+#define CI134_ASIC_ID 3
+#define CI104J_ASIC_ID 5
+
+#define MXSER_HIGHBAUD 1
+#define MXSER_HAS2 2
+
+/* This is only for PCI */
+static const struct {
+ int type;
+ int tx_fifo;
+ int rx_fifo;
+ int xmit_fifo_size;
+ int rx_high_water;
+ int rx_trigger;
+ int rx_low_water;
+ long max_baud;
+} Gpci_uart_info[] = {
+ {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L},
+ {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L},
+ {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L}
+};
+#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info)
+
+struct mxser_cardinfo {
+ unsigned int nports;
+ char *name;
+ unsigned int flags;
+};
+
+static const struct mxser_cardinfo mxser_cards[] = {
+ { 8, "C168 series", }, /* C168-ISA */
+ { 4, "C104 series", }, /* C104-ISA */
+ { 4, "CI-104J series", }, /* CI104J */
+ { 8, "C168H/PCI series", }, /* C168-PCI */
+ { 4, "C104H/PCI series", }, /* C104-PCI */
+ { 4, "C102 series", MXSER_HAS2 }, /* C102-ISA */
+ { 4, "CI-132 series", MXSER_HAS2 }, /* CI132 */
+ { 4, "CI-134 series", }, /* CI134 */
+ { 2, "CP-132 series", }, /* CP132 */
+ { 4, "CP-114 series", }, /* CP114 */
+ { 4, "CT-114 series", }, /* CT114 */
+ { 2, "CP-102 series", MXSER_HIGHBAUD }, /* CP102 */
+ { 4, "CP-104U series", }, /* CP104U */
+ { 8, "CP-168U series", }, /* CP168U */
+ { 2, "CP-132U series", }, /* CP132U */
+ { 4, "CP-134U series", }, /* CP134U */
+ { 4, "CP-104JU series", }, /* CP104JU */
+ { 8, "Moxa UC7000 Serial", }, /* RC7000 */
+ { 8, "CP-118U series", }, /* CP118U */
+ { 2, "CP-102UL series", }, /* CP102UL */
+ { 2, "CP-102U series", }, /* CP102U */
+ { 8, "CP-118EL series", }, /* CP118EL */
+ { 8, "CP-168EL series", }, /* CP168EL */
+ { 4, "CP-104EL series", } /* CP104EL */
+};
+
+/* driver_data correspond to the lines in the structure above
+ see also ISA probe function before you change something */
+static struct pci_device_id mxser_pcibrds[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C168),
+ .driver_data = 3 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C104),
+ .driver_data = 4 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132),
+ .driver_data = 8 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114),
+ .driver_data = 9 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CT114),
+ .driver_data = 10 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102),
+ .driver_data = 11 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104U),
+ .driver_data = 12 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168U),
+ .driver_data = 13 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132U),
+ .driver_data = 14 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134U),
+ .driver_data = 15 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104JU),
+ .driver_data = 16 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_RC7000),
+ .driver_data = 17 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118U),
+ .driver_data = 18 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102UL),
+ .driver_data = 19 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102U),
+ .driver_data = 20 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118EL),
+ .driver_data = 21 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168EL),
+ .driver_data = 22 },
+ { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104EL),
+ .driver_data = 23 },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
+
+static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
+static int ttymajor = MXSERMAJOR;
+static int calloutmajor = MXSERCUMAJOR;
+
+/* Variables for insmod */
+
+MODULE_AUTHOR("Casper Yang");
+MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
+module_param_array(ioaddr, int, NULL, 0);
+module_param(ttymajor, int, 0);
+MODULE_LICENSE("GPL");
+
+struct mxser_log {
+ int tick;
+ unsigned long rxcnt[MXSER_PORTS];
+ unsigned long txcnt[MXSER_PORTS];
+};
+
+
+struct mxser_mon {
+ unsigned long rxcnt;
+ unsigned long txcnt;
+ unsigned long up_rxcnt;
+ unsigned long up_txcnt;
+ int modem_status;
+ unsigned char hold_reason;
+};
+
+struct mxser_mon_ext {
+ unsigned long rx_cnt[32];
+ unsigned long tx_cnt[32];
+ unsigned long up_rxcnt[32];
+ unsigned long up_txcnt[32];
+ int modem_status[32];
+
+ long baudrate[32];
+ int databits[32];
+ int stopbits[32];
+ int parity[32];
+ int flowctrl[32];
+ int fifo[32];
+ int iftype[32];
+};
+
+struct mxser_board;
+
+struct mxser_port {
+ struct mxser_board *board;
+ struct tty_struct *tty;
+
+ unsigned long ioaddr;
+ unsigned long opmode_ioaddr;
+ int max_baud;
+
+ int rx_high_water;
+ int rx_trigger; /* Rx fifo trigger level */
+ int rx_low_water;
+ int baud_base; /* max. speed */
+ long realbaud;
+ int type; /* UART type */
+ int flags; /* defined in tty.h */
+ long session; /* Session of opening process */
+ long pgrp; /* pgrp of opening process */
+
+ int x_char; /* xon/xoff character */
+ int IER; /* Interrupt Enable Register */
+ int MCR; /* Modem control register */
+
+ unsigned char stop_rx;
+ unsigned char ldisc_stop_rx;
+
+ int custom_divisor;
+ int close_delay;
+ unsigned short closing_wait;
+ unsigned char err_shadow;
+ unsigned long event;
+
+ int count; /* # of fd on device */
+ int blocked_open; /* # of blocked opens */
+ struct async_icount icount; /* kernel counters for 4 input interrupts */
+ int timeout;
+
+ int read_status_mask;
+ int ignore_status_mask;
+ int xmit_fifo_size;
+ unsigned char *xmit_buf;
+ int xmit_head;
+ int xmit_tail;
+ int xmit_cnt;
+
+ struct ktermios normal_termios;
+ struct ktermios callout_termios;
+
+ struct mxser_mon mon_data;
+
+ spinlock_t slock;
+ struct work_struct tqueue;
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+ wait_queue_head_t delta_msr_wait;
+};
+
+struct mxser_board {
+ unsigned int idx;
+ int irq;
+ const struct mxser_cardinfo *info;
+ unsigned long vector;
+ unsigned long vector_mask;
+
+ int chip_flag;
+ int uart_type;
+
+ struct mxser_port ports[MXSER_PORTS_PER_BOARD];
+};
+
+struct mxser_mstatus {
+ tcflag_t cflag;
+ int cts;
+ int dsr;
+ int ri;
+ int dcd;
+};
+
+static struct mxser_mstatus GMStatus[MXSER_PORTS];
+
+static int mxserBoardCAP[MXSER_BOARDS] = {
+ 0, 0, 0, 0
+ /* 0x180, 0x280, 0x200, 0x320 */
+};
+
+static struct mxser_board mxser_boards[MXSER_BOARDS];
+static struct tty_driver *mxvar_sdriver;
+static struct mxser_log mxvar_log;
+static int mxvar_diagflag;
+static unsigned char mxser_msr[MXSER_PORTS + 1];
+static struct mxser_mon_ext mon_data_ext;
+static int mxser_set_baud_method[MXSER_PORTS + 1];
+static spinlock_t gm_lock;
+
+#ifdef CONFIG_PCI
+static int CheckIsMoxaMust(int io)
+{
+ u8 oldmcr, hwid;
+ int i;
+
+ outb(0, io + UART_LCR);
+ DISABLE_MOXA_MUST_ENCHANCE_MODE(io);
+ oldmcr = inb(io + UART_MCR);
+ outb(0, io + UART_MCR);
+ SET_MOXA_MUST_XON1_VALUE(io, 0x11);
+ if ((hwid = inb(io + UART_MCR)) != 0) {
+ outb(oldmcr, io + UART_MCR);
+ return MOXA_OTHER_UART;
+ }
+
+ GET_MOXA_MUST_HARDWARE_ID(io, &hwid);
+ for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
+ if (hwid == Gpci_uart_info[i].type)
+ return (int)hwid;
+ }
+ return MOXA_OTHER_UART;
+}
+#endif
+
+static void process_txrx_fifo(struct mxser_port *info)
+{
+ int i;
+
+ if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
+ info->rx_trigger = 1;
+ info->rx_high_water = 1;
+ info->rx_low_water = 1;
+ info->xmit_fifo_size = 1;
+ } else
+ for (i = 0; i < UART_INFO_NUM; i++)
+ if (info->board->chip_flag == Gpci_uart_info[i].type) {
+ info->rx_trigger = Gpci_uart_info[i].rx_trigger;
+ info->rx_low_water = Gpci_uart_info[i].rx_low_water;
+ info->rx_high_water = Gpci_uart_info[i].rx_high_water;
+ info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
+ break;
+ }
+}
+
+static void mxser_do_softint(struct work_struct *work)
+{
+ struct mxser_port *info = container_of(work, struct mxser_port, tqueue);
+ struct tty_struct *tty = info->tty;
+
+ if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event))
+ tty_wakeup(tty);
+}
+
+static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
+{
+ unsigned char status = 0;
+
+ status = inb(baseaddr + UART_MSR);
+
+ mxser_msr[port] &= 0x0F;
+ mxser_msr[port] |= status;
+ status = mxser_msr[port];
+ if (mode)
+ mxser_msr[port] = 0;
+
+ return status;
+}
+
+static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
+ struct mxser_port *port)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int retval;
+ int do_clocal = 0;
+ unsigned long flags;
+
+ /*
+ * If non-blocking mode is set, or the port is not enabled,
+ * then make the check up front and then exit.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ test_bit(TTY_IO_ERROR, &tty->flags)) {
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = 1;
+
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, port->count is dropped by one, so that
+ * mxser_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+ add_wait_queue(&port->open_wait, &wait);
+
+ spin_lock_irqsave(&port->slock, flags);
+ if (!tty_hung_up_p(filp))
+ port->count--;
+ spin_unlock_irqrestore(&port->slock, flags);
+ port->blocked_open++;
+ while (1) {
+ spin_lock_irqsave(&port->slock, flags);
+ outb(inb(port->ioaddr + UART_MCR) |
+ UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR);
+ spin_unlock_irqrestore(&port->slock, flags);
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
+ if (port->flags & ASYNC_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+ break;
+ }
+ if (!(port->flags & ASYNC_CLOSING) &&
+ (do_clocal ||
+ (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD)))
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->open_wait, &wait);
+ if (!tty_hung_up_p(filp))
+ port->count++;
+ port->blocked_open--;
+ if (retval)
+ return retval;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+}
+
+static int mxser_set_baud(struct mxser_port *info, long newspd)
+{
+ int quot = 0;
+ unsigned char cval;
+ int ret = 0;
+ unsigned long flags;
+
+ if (!info->tty || !info->tty->termios)
+ return ret;
+
+ if (!(info->ioaddr))
+ return ret;
+
+ if (newspd > info->max_baud)
+ return 0;
+
+ info->realbaud = newspd;
+ if (newspd == 134) {
+ quot = (2 * info->baud_base / 269);
+ } else if (newspd) {
+ quot = info->baud_base / newspd;
+ if (quot == 0)
+ quot = 1;
+ } else {
+ quot = 0;
+ }
+
+ info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
+ info->timeout += HZ / 50; /* Add .02 seconds of slop */
+
+ if (quot) {
+ spin_lock_irqsave(&info->slock, flags);
+ info->MCR |= UART_MCR_DTR;
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+ } else {
+ spin_lock_irqsave(&info->slock, flags);
+ info->MCR &= ~UART_MCR_DTR;
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+ return ret;
+ }
+
+ cval = inb(info->ioaddr + UART_LCR);
+
+ outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */
+
+ outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */
+ outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */
+ outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
+
+
+ return ret;
+}
+
+/*
+ * This routine is called to set the UART divisor registers to match
+ * the specified baud rate for a serial port.
+ */
+static int mxser_change_speed(struct mxser_port *info,
+ struct ktermios *old_termios)
+{
+ unsigned cflag, cval, fcr;
+ int ret = 0;
+ unsigned char status;
+ long baud;
+ unsigned long flags;
+
+ if (!info->tty || !info->tty->termios)
+ return ret;
+ cflag = info->tty->termios->c_cflag;
+ if (!(info->ioaddr))
+ return ret;
+
+ if (mxser_set_baud_method[info->tty->index] == 0) {
+ baud = tty_get_baud_rate(info->tty);
+ mxser_set_baud(info, baud);
+ }
+
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ case CS8:
+ cval = 0x03;
+ break;
+ default:
+ cval = 0x00;
+ break; /* too keep GCC shut... */
+ }
+ if (cflag & CSTOPB)
+ cval |= 0x04;
+ if (cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+ if (cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+
+ if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
+ if (info->board->chip_flag) {
+ fcr = UART_FCR_ENABLE_FIFO;
+ fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+ SET_MOXA_MUST_FIFO_VALUE(info);
+ } else
+ fcr = 0;
+ } else {
+ fcr = UART_FCR_ENABLE_FIFO;
+ if (info->board->chip_flag) {
+ fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+ SET_MOXA_MUST_FIFO_VALUE(info);
+ } else {
+ switch (info->rx_trigger) {
+ case 1:
+ fcr |= UART_FCR_TRIGGER_1;
+ break;
+ case 4:
+ fcr |= UART_FCR_TRIGGER_4;
+ break;
+ case 8:
+ fcr |= UART_FCR_TRIGGER_8;
+ break;
+ default:
+ fcr |= UART_FCR_TRIGGER_14;
+ break;
+ }
+ }
+ }
+
+ /* CTS flow control flag and modem status interrupts */
+ info->IER &= ~UART_IER_MSI;
+ info->MCR &= ~UART_MCR_AFE;
+ if (cflag & CRTSCTS) {
+ info->flags |= ASYNC_CTS_FLOW;
+ info->IER |= UART_IER_MSI;
+ if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
+ info->MCR |= UART_MCR_AFE;
+ } else {
+ status = inb(info->ioaddr + UART_MSR);
+ if (info->tty->hw_stopped) {
+ if (status & UART_MSR_CTS) {
+ info->tty->hw_stopped = 0;
+ if (info->type != PORT_16550A &&
+ !info->board->chip_flag) {
+ outb(info->IER & ~UART_IER_THRI,
+ info->ioaddr +
+ UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr +
+ UART_IER);
+ }
+ set_bit(MXSER_EVENT_TXLOW, &info->event);
+ schedule_work(&info->tqueue); }
+ } else {
+ if (!(status & UART_MSR_CTS)) {
+ info->tty->hw_stopped = 1;
+ if ((info->type != PORT_16550A) &&
+ (!info->board->chip_flag)) {
+ info->IER &= ~UART_IER_THRI;
+ outb(info->IER, info->ioaddr +
+ UART_IER);
+ }
+ }
+ }
+ }
+ } else {
+ info->flags &= ~ASYNC_CTS_FLOW;
+ }
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ if (cflag & CLOCAL) {
+ info->flags &= ~ASYNC_CHECK_CD;
+ } else {
+ info->flags |= ASYNC_CHECK_CD;
+ info->IER |= UART_IER_MSI;
+ }
+ outb(info->IER, info->ioaddr + UART_IER);
+
+ /*
+ * Set up parity check flag
+ */
+ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (I_INPCK(info->tty))
+ info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ info->read_status_mask |= UART_LSR_BI;
+
+ info->ignore_status_mask = 0;
+
+ if (I_IGNBRK(info->tty)) {
+ info->ignore_status_mask |= UART_LSR_BI;
+ info->read_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (I_IGNPAR(info->tty)) {
+ info->ignore_status_mask |=
+ UART_LSR_OE |
+ UART_LSR_PE |
+ UART_LSR_FE;
+ info->read_status_mask |=
+ UART_LSR_OE |
+ UART_LSR_PE |
+ UART_LSR_FE;
+ }
+ }
+ if (info->board->chip_flag) {
+ spin_lock_irqsave(&info->slock, flags);
+ SET_MOXA_MUST_XON1_VALUE(info->ioaddr, START_CHAR(info->tty));
+ SET_MOXA_MUST_XOFF1_VALUE(info->ioaddr, STOP_CHAR(info->tty));
+ if (I_IXON(info->tty)) {
+ ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ } else {
+ DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ }
+ if (I_IXOFF(info->tty)) {
+ ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ } else {
+ DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ }
+ spin_unlock_irqrestore(&info->slock, flags);
+ }
+
+
+ outb(fcr, info->ioaddr + UART_FCR); /* set fcr */
+ outb(cval, info->ioaddr + UART_LCR);
+
+ return ret;
+}
+
+static void mxser_check_modem_status(struct mxser_port *port, int status)
+{
+ /* update input line counters */
+ if (status & UART_MSR_TERI)
+ port->icount.rng++;
+ if (status & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ port->icount.dcd++;
+ if (status & UART_MSR_DCTS)
+ port->icount.cts++;
+ port->mon_data.modem_status = status;
+ wake_up_interruptible(&port->delta_msr_wait);
+
+ if ((port->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
+ if (status & UART_MSR_DCD)
+ wake_up_interruptible(&port->open_wait);
+ schedule_work(&port->tqueue);
+ }
+
+ if (port->flags & ASYNC_CTS_FLOW) {
+ if (port->tty->hw_stopped) {
+ if (status & UART_MSR_CTS) {
+ port->tty->hw_stopped = 0;
+
+ if ((port->type != PORT_16550A) &&
+ (!port->board->chip_flag)) {
+ outb(port->IER & ~UART_IER_THRI,
+ port->ioaddr + UART_IER);
+ port->IER |= UART_IER_THRI;
+ outb(port->IER, port->ioaddr +
+ UART_IER);
+ }
+ set_bit(MXSER_EVENT_TXLOW, &port->event);
+ schedule_work(&port->tqueue);
+ }
+ } else {
+ if (!(status & UART_MSR_CTS)) {
+ port->tty->hw_stopped = 1;
+ if (port->type != PORT_16550A &&
+ !port->board->chip_flag) {
+ port->IER &= ~UART_IER_THRI;
+ outb(port->IER, port->ioaddr +
+ UART_IER);
+ }
+ }
+ }
+ }
+}
+
+static int mxser_startup(struct mxser_port *info)
+{
+ unsigned long page;
+ unsigned long flags;
+
+ page = __get_free_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&info->slock, flags);
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ free_page(page);
+ spin_unlock_irqrestore(&info->slock, flags);
+ return 0;
+ }
+
+ if (!info->ioaddr || !info->type) {
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ free_page(page);
+ spin_unlock_irqrestore(&info->slock, flags);
+ return 0;
+ }
+ if (info->xmit_buf)
+ free_page(page);
+ else
+ info->xmit_buf = (unsigned char *) page;
+
+ /*
+ * Clear the FIFO buffers and disable them
+ * (they will be reenabled in mxser_change_speed())
+ */
+ if (info->board->chip_flag)
+ outb((UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT |
+ MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
+ else
+ outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
+ info->ioaddr + UART_FCR);
+
+ /*
+ * At this point there's no way the LSR could still be 0xFF;
+ * if it is, then bail out, because there's likely no UART
+ * here.
+ */
+ if (inb(info->ioaddr + UART_LSR) == 0xff) {
+ spin_unlock_irqrestore(&info->slock, flags);
+ if (capable(CAP_SYS_ADMIN)) {
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ return 0;
+ } else
+ return -ENODEV;
+ }
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) inb(info->ioaddr + UART_LSR);
+ (void) inb(info->ioaddr + UART_RX);
+ (void) inb(info->ioaddr + UART_IIR);
+ (void) inb(info->ioaddr + UART_MSR);
+
+ /*
+ * Now, initialize the UART
+ */
+ outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */
+ info->MCR = UART_MCR_DTR | UART_MCR_RTS;
+ outb(info->MCR, info->ioaddr + UART_MCR);
+
+ /*
+ * Finally, enable interrupts
+ */
+ info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
+
+ if (info->board->chip_flag)
+ info->IER |= MOXA_MUST_IER_EGDAI;
+ outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ (void) inb(info->ioaddr + UART_LSR);
+ (void) inb(info->ioaddr + UART_RX);
+ (void) inb(info->ioaddr + UART_IIR);
+ (void) inb(info->ioaddr + UART_MSR);
+
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+ /*
+ * and set the speed of the serial port
+ */
+ spin_unlock_irqrestore(&info->slock, flags);
+ mxser_change_speed(info, NULL);
+
+ info->flags |= ASYNC_INITIALIZED;
+ return 0;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts maybe disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void mxser_shutdown(struct mxser_port *info)
+{
+ unsigned long flags;
+
+ if (!(info->flags & ASYNC_INITIALIZED))
+ return;
+
+ spin_lock_irqsave(&info->slock, flags);
+
+ /*
+ * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
+ * here so the queue might never be waken up
+ */
+ wake_up_interruptible(&info->delta_msr_wait);
+
+ /*
+ * Free the IRQ, if necessary
+ */
+ if (info->xmit_buf) {
+ free_page((unsigned long) info->xmit_buf);
+ info->xmit_buf = NULL;
+ }
+
+ info->IER = 0;
+ outb(0x00, info->ioaddr + UART_IER);
+
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+ info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
+ outb(info->MCR, info->ioaddr + UART_MCR);
+
+ /* clear Rx/Tx FIFO's */
+ if (info->board->chip_flag)
+ outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
+ MOXA_MUST_FCR_GDA_MODE_ENABLE,
+ info->ioaddr + UART_FCR);
+ else
+ outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+ info->ioaddr + UART_FCR);
+
+ /* read data port to reset things */
+ (void) inb(info->ioaddr + UART_RX);
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~ASYNC_INITIALIZED;
+
+ if (info->board->chip_flag)
+ SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+
+ spin_unlock_irqrestore(&info->slock, flags);
+}
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain. It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+static int mxser_open(struct tty_struct *tty, struct file *filp)
+{
+ struct mxser_port *info;
+ int retval, line;
+
+ /* initialize driver_data in case something fails */
+ tty->driver_data = NULL;
+
+ line = tty->index;
+ if (line == MXSER_PORTS)
+ return 0;
+ if (line < 0 || line > MXSER_PORTS)
+ return -ENODEV;
+ info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD];
+ if (!info->ioaddr)
+ return -ENODEV;
+
+ tty->driver_data = info;
+ info->tty = tty;
+ /*
+ * Start up serial port
+ */
+ info->count++;
+ retval = mxser_startup(info);
+ if (retval)
+ return retval;
+
+ retval = mxser_block_til_ready(tty, filp, info);
+ if (retval)
+ return retval;
+
+ if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
+ if (tty->driver->subtype == SERIAL_TYPE_NORMAL)
+ *tty->termios = info->normal_termios;
+ else
+ *tty->termios = info->callout_termios;
+ mxser_change_speed(info, NULL);
+ }
+
+ info->session = process_session(current);
+ info->pgrp = process_group(current);
+
+ /* unmark here for very high baud rate (ex. 921600 bps) used */
+ tty->low_latency = 1;
+ return 0;
+}
+
+/*
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ */
+static void mxser_close(struct tty_struct *tty, struct file *filp)
+{
+ struct mxser_port *info = tty->driver_data;
+
+ unsigned long timeout;
+ unsigned long flags;
+
+ if (tty->index == MXSER_PORTS)
+ return;
+ if (!info)
+ return;
+
+ spin_lock_irqsave(&info->slock, flags);
+
+ if (tty_hung_up_p(filp)) {
+ spin_unlock_irqrestore(&info->slock, flags);
+ return;
+ }
+ if ((tty->count == 1) && (info->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. Info->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk(KERN_ERR "mxser_close: bad serial port count; "
+ "tty->count is 1, info->count is %d\n", info->count);
+ info->count = 1;
+ }
+ if (--info->count < 0) {
+ printk(KERN_ERR "mxser_close: bad serial port count for "
+ "ttys%d: %d\n", tty->index, info->count);
+ info->count = 0;
+ }
+ if (info->count) {
+ spin_unlock_irqrestore(&info->slock, flags);
+ return;
+ }
+ info->flags |= ASYNC_CLOSING;
+ spin_unlock_irqrestore(&info->slock, flags);
+ /*
+ * Save the termios structure, since this port may have
+ * separate termios for callout and dialin.
+ */
+ if (info->flags & ASYNC_NORMAL_ACTIVE)
+ info->normal_termios = *tty->termios;
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->closing_wait);
+ /*
+ * At this point we stop accepting input. To do this, we
+ * disable the receive line status interrupts, and tell the
+ * interrupt driver to stop checking the data ready bit in the
+ * line status register.
+ */
+ info->IER &= ~UART_IER_RLSI;
+ if (info->board->chip_flag)
+ info->IER &= ~MOXA_MUST_RECV_ISR;
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ outb(info->IER, info->ioaddr + UART_IER);
+ /*
+ * Before we drop DTR, make sure the UART transmitter
+ * has completely drained; this is especially
+ * important if there is a transmit FIFO!
+ */
+ timeout = jiffies + HZ;
+ while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
+ schedule_timeout_interruptible(5);
+ if (time_after(jiffies, timeout))
+ break;
+ }
+ }
+ mxser_shutdown(info);
+
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+
+ tty_ldisc_flush(tty);
+
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = NULL;
+ if (info->blocked_open) {
+ if (info->close_delay)
+ schedule_timeout_interruptible(info->close_delay);
+ wake_up_interruptible(&info->open_wait);
+ }
+
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+
+}
+
+static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ int c, total = 0;
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
+
+ if (!info->xmit_buf)
+ return 0;
+
+ while (1) {
+ c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - info->xmit_head));
+ if (c <= 0)
+ break;
+
+ memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ spin_lock_irqsave(&info->slock, flags);
+ info->xmit_head = (info->xmit_head + c) &
+ (SERIAL_XMIT_SIZE - 1);
+ info->xmit_cnt += c;
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ buf += c;
+ count -= c;
+ total += c;
+ }
+
+ if (info->xmit_cnt && !tty->stopped) {
+ if (!tty->hw_stopped ||
+ (info->type == PORT_16550A) ||
+ (info->board->chip_flag)) {
+ spin_lock_irqsave(&info->slock, flags);
+ outb(info->IER & ~UART_IER_THRI, info->ioaddr +
+ UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ spin_unlock_irqrestore(&info->slock, flags);
+ }
+ }
+ return total;
+}
+
+static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
+
+ if (!info->xmit_buf)
+ return;
+
+ if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
+ return;
+
+ spin_lock_irqsave(&info->slock, flags);
+ info->xmit_buf[info->xmit_head++] = ch;
+ info->xmit_head &= SERIAL_XMIT_SIZE - 1;
+ info->xmit_cnt++;
+ spin_unlock_irqrestore(&info->slock, flags);
+ if (!tty->stopped) {
+ if (!tty->hw_stopped ||
+ (info->type == PORT_16550A) ||
+ info->board->chip_flag) {
+ spin_lock_irqsave(&info->slock, flags);
+ outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ spin_unlock_irqrestore(&info->slock, flags);
+ }
+ }
+}
+
+
+static void mxser_flush_chars(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
+
+ if (info->xmit_cnt <= 0 ||
+ tty->stopped ||
+ !info->xmit_buf ||
+ (tty->hw_stopped &&
+ (info->type != PORT_16550A) &&
+ (!info->board->chip_flag)
+ ))
+ return;
+
+ spin_lock_irqsave(&info->slock, flags);
+
+ outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+
+ spin_unlock_irqrestore(&info->slock, flags);
+}
+
+static int mxser_write_room(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ int ret;
+
+ ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+ if (ret < 0)
+ ret = 0;
+ return ret;
+}
+
+static int mxser_chars_in_buffer(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ return info->xmit_cnt;
+}
+
+static void mxser_flush_buffer(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ char fcr;
+ unsigned long flags;
+
+
+ spin_lock_irqsave(&info->slock, flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+ fcr = inb(info->ioaddr + UART_FCR);
+ outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
+ info->ioaddr + UART_FCR);
+ outb(fcr, info->ioaddr + UART_FCR);
+
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ tty_wakeup(tty);
+}
+
+/*
+ * ------------------------------------------------------------
+ * friends of mxser_ioctl()
+ * ------------------------------------------------------------
+ */
+static int mxser_get_serial_info(struct mxser_port *info,
+ struct serial_struct __user *retinfo)
+{
+ struct serial_struct tmp;
+
+ if (!retinfo)
+ return -EFAULT;
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = info->type;
+ tmp.line = info->tty->index;
+ tmp.port = info->ioaddr;
+ tmp.irq = info->board->irq;
+ tmp.flags = info->flags;
+ tmp.baud_base = info->baud_base;
+ tmp.close_delay = info->close_delay;
+ tmp.closing_wait = info->closing_wait;
+ tmp.custom_divisor = info->custom_divisor;
+ tmp.hub6 = 0;
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+static int mxser_set_serial_info(struct mxser_port *info,
+ struct serial_struct __user *new_info)
+{
+ struct serial_struct new_serial;
+ unsigned int flags;
+ int retval = 0;
+
+ if (!new_info || !info->ioaddr)
+ return -EFAULT;
+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+ return -EFAULT;
+
+ if ((new_serial.irq != info->board->irq) ||
+ (new_serial.port != info->ioaddr) ||
+ (new_serial.custom_divisor != info->custom_divisor) ||
+ (new_serial.baud_base != info->baud_base))
+ return -EPERM;
+
+ flags = info->flags & ASYNC_SPD_MASK;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((new_serial.baud_base != info->baud_base) ||
+ (new_serial.close_delay != info->close_delay) ||
+ ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK)))
+ return -EPERM;
+ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ } else {
+ /*
+ * OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+ info->flags = ((info->flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS));
+ info->close_delay = new_serial.close_delay * HZ / 100;
+ info->closing_wait = new_serial.closing_wait * HZ / 100;
+ info->tty->low_latency =
+ (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->tty->low_latency = 0;
+ }
+
+ info->type = new_serial.type;
+
+ process_txrx_fifo(info);
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ if (flags != (info->flags & ASYNC_SPD_MASK))
+ mxser_change_speed(info, NULL);
+ } else
+ retval = mxser_startup(info);
+
+ return retval;
+}
+
+/*
+ * mxser_get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ */
+static int mxser_get_lsr_info(struct mxser_port *info,
+ unsigned int __user *value)
+{
+ unsigned char status;
+ unsigned int result;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->slock, flags);
+ status = inb(info->ioaddr + UART_LSR);
+ spin_unlock_irqrestore(&info->slock, flags);
+ result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
+ return put_user(result, value);
+}
+
+/*
+ * This routine sends a break character out the serial port.
+ */
+static void mxser_send_break(struct mxser_port *info, int duration)
+{
+ unsigned long flags;
+
+ if (!info->ioaddr)
+ return;
+ set_current_state(TASK_INTERRUPTIBLE);
+ spin_lock_irqsave(&info->slock, flags);
+ outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
+ info->ioaddr + UART_LCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+ schedule_timeout(duration);
+ spin_lock_irqsave(&info->slock, flags);
+ outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
+ info->ioaddr + UART_LCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+}
+
+static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned char control, status;
+ unsigned long flags;
+
+
+ if (tty->index == MXSER_PORTS)
+ return -ENOIOCTLCMD;
+ if (test_bit(TTY_IO_ERROR, &tty->flags))
+ return -EIO;
+
+ control = info->MCR;
+
+ spin_lock_irqsave(&info->slock, flags);
+ status = inb(info->ioaddr + UART_MSR);
+ if (status & UART_MSR_ANY_DELTA)
+ mxser_check_modem_status(info, status);
+ spin_unlock_irqrestore(&info->slock, flags);
+ return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
+ ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
+ ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) |
+ ((status & UART_MSR_RI) ? TIOCM_RNG : 0) |
+ ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) |
+ ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
+}
+
+static int mxser_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
+
+
+ if (tty->index == MXSER_PORTS)
+ return -ENOIOCTLCMD;
+ if (test_bit(TTY_IO_ERROR, &tty->flags))
+ return -EIO;
+
+ spin_lock_irqsave(&info->slock, flags);
+
+ if (set & TIOCM_RTS)
+ info->MCR |= UART_MCR_RTS;
+ if (set & TIOCM_DTR)
+ info->MCR |= UART_MCR_DTR;
+
+ if (clear & TIOCM_RTS)
+ info->MCR &= ~UART_MCR_RTS;
+ if (clear & TIOCM_DTR)
+ info->MCR &= ~UART_MCR_DTR;
+
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+ return 0;
+}
+
+static int mxser_program_mode(int port)
+{
+ int id, i, j, n;
+
+ spin_lock(&gm_lock);
+ outb(0, port);
+ outb(0, port);
+ outb(0, port);
+ (void)inb(port);
+ (void)inb(port);
+ outb(0, port);
+ (void)inb(port);
+ spin_unlock(&gm_lock);
+
+ id = inb(port + 1) & 0x1F;
+ if ((id != C168_ASIC_ID) &&
+ (id != C104_ASIC_ID) &&
+ (id != C102_ASIC_ID) &&
+ (id != CI132_ASIC_ID) &&
+ (id != CI134_ASIC_ID) &&
+ (id != CI104J_ASIC_ID))
+ return -1;
+ for (i = 0, j = 0; i < 4; i++) {
+ n = inb(port + 2);
+ if (n == 'M') {
+ j = 1;
+ } else if ((j == 1) && (n == 1)) {
+ j = 2;
+ break;
+ } else
+ j = 0;
+ }
+ if (j != 2)
+ id = -2;
+ return id;
+}
+
+static void mxser_normal_mode(int port)
+{
+ int i, n;
+
+ outb(0xA5, port + 1);
+ outb(0x80, port + 3);
+ outb(12, port + 0); /* 9600 bps */
+ outb(0, port + 1);
+ outb(0x03, port + 3); /* 8 data bits */
+ outb(0x13, port + 4); /* loop back mode */
+ for (i = 0; i < 16; i++) {
+ n = inb(port + 5);
+ if ((n & 0x61) == 0x60)
+ break;
+ if ((n & 1) == 1)
+ (void)inb(port);
+ }
+ outb(0x00, port + 4);
+}
+
+#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */
+#define CHIP_DO 0x02 /* Serial Data Output in Eprom */
+#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */
+#define CHIP_DI 0x08 /* Serial Data Input in Eprom */
+#define EN_CCMD 0x000 /* Chip's command register */
+#define EN0_RSARLO 0x008 /* Remote start address reg 0 */
+#define EN0_RSARHI 0x009 /* Remote start address reg 1 */
+#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */
+#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */
+#define EN0_DCFG 0x00E /* Data configuration reg WR */
+#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */
+#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */
+#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */
+static int mxser_read_register(int port, unsigned short *regs)
+{
+ int i, k, value, id;
+ unsigned int j;
+
+ id = mxser_program_mode(port);
+ if (id < 0)
+ return id;
+ for (i = 0; i < 14; i++) {
+ k = (i & 0x3F) | 0x180;
+ for (j = 0x100; j > 0; j >>= 1) {
+ outb(CHIP_CS, port);
+ if (k & j) {
+ outb(CHIP_CS | CHIP_DO, port);
+ outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */
+ } else {
+ outb(CHIP_CS, port);
+ outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */
+ }
+ }
+ (void)inb(port);
+ value = 0;
+ for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
+ outb(CHIP_CS, port);
+ outb(CHIP_CS | CHIP_SK, port);
+ if (inb(port) & CHIP_DI)
+ value |= j;
+ }
+ regs[i] = value;
+ outb(0, port);
+ }
+ mxser_normal_mode(port);
+ return id;
+}
+
+static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
+{
+ struct mxser_port *port;
+ int result, status;
+ unsigned int i, j;
+
+ switch (cmd) {
+ case MOXA_GET_CONF:
+/* if (copy_to_user(argp, mxsercfg,
+ sizeof(struct mxser_hwconf) * 4))
+ return -EFAULT;
+ return 0;*/
+ return -ENXIO;
+ case MOXA_GET_MAJOR:
+ if (copy_to_user(argp, &ttymajor, sizeof(int)))
+ return -EFAULT;
+ return 0;
+
+ case MOXA_GET_CUMAJOR:
+ if (copy_to_user(argp, &calloutmajor, sizeof(int)))
+ return -EFAULT;
+ return 0;
+
+ case MOXA_CHKPORTENABLE:
+ result = 0;
+
+ for (i = 0; i < MXSER_BOARDS; i++)
+ for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
+ if (mxser_boards[i].ports[j].ioaddr)
+ result |= (1 << i);
+
+ return put_user(result, (unsigned long __user *)argp);
+ case MOXA_GETDATACOUNT:
+ if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
+ return -EFAULT;
+ return 0;
+ case MOXA_GETMSTATUS:
+ for (i = 0; i < MXSER_BOARDS; i++)
+ for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+ port = &mxser_boards[i].ports[j];
+
+ GMStatus[i].ri = 0;
+ if (!port->ioaddr) {
+ GMStatus[i].dcd = 0;
+ GMStatus[i].dsr = 0;
+ GMStatus[i].cts = 0;
+ continue;
+ }
+
+ if (!port->tty || !port->tty->termios)
+ GMStatus[i].cflag =
+ port->normal_termios.c_cflag;
+ else
+ GMStatus[i].cflag =
+ port->tty->termios->c_cflag;
+
+ status = inb(port->ioaddr + UART_MSR);
+ if (status & 0x80 /*UART_MSR_DCD */ )
+ GMStatus[i].dcd = 1;
+ else
+ GMStatus[i].dcd = 0;
+
+ if (status & 0x20 /*UART_MSR_DSR */ )
+ GMStatus[i].dsr = 1;
+ else
+ GMStatus[i].dsr = 0;
+
+
+ if (status & 0x10 /*UART_MSR_CTS */ )
+ GMStatus[i].cts = 1;
+ else
+ GMStatus[i].cts = 0;
+ }
+ if (copy_to_user(argp, GMStatus,
+ sizeof(struct mxser_mstatus) * MXSER_PORTS))
+ return -EFAULT;
+ return 0;
+ case MOXA_ASPP_MON_EXT: {
+ int status, p, shiftbit;
+ unsigned long opmode;
+ unsigned cflag, iflag;
+
+ for (i = 0; i < MXSER_BOARDS; i++)
+ for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
+ port = &mxser_boards[i].ports[j];
+ if (!port->ioaddr)
+ continue;
+
+ status = mxser_get_msr(port->ioaddr, 0, i);
+
+ if (status & UART_MSR_TERI)
+ port->icount.rng++;
+ if (status & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ port->icount.dcd++;
+ if (status & UART_MSR_DCTS)
+ port->icount.cts++;
+
+ port->mon_data.modem_status = status;
+ mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt;
+ mon_data_ext.tx_cnt[i] = port->mon_data.txcnt;
+ mon_data_ext.up_rxcnt[i] =
+ port->mon_data.up_rxcnt;
+ mon_data_ext.up_txcnt[i] =
+ port->mon_data.up_txcnt;
+ mon_data_ext.modem_status[i] =
+ port->mon_data.modem_status;
+ mon_data_ext.baudrate[i] = port->realbaud;
+
+ if (!port->tty || !port->tty->termios) {
+ cflag = port->normal_termios.c_cflag;
+ iflag = port->normal_termios.c_iflag;
+ } else {
+ cflag = port->tty->termios->c_cflag;
+ iflag = port->tty->termios->c_iflag;
+ }
+
+ mon_data_ext.databits[i] = cflag & CSIZE;
+
+ mon_data_ext.stopbits[i] = cflag & CSTOPB;
+
+ mon_data_ext.parity[i] =
+ cflag & (PARENB | PARODD | CMSPAR);
+
+ mon_data_ext.flowctrl[i] = 0x00;
+
+ if (cflag & CRTSCTS)
+ mon_data_ext.flowctrl[i] |= 0x03;
+
+ if (iflag & (IXON | IXOFF))
+ mon_data_ext.flowctrl[i] |= 0x0C;
+
+ if (port->type == PORT_16550A)
+ mon_data_ext.fifo[i] = 1;
+ else
+ mon_data_ext.fifo[i] = 0;
+
+ p = i % 4;
+ shiftbit = p * 2;
+ opmode = inb(port->opmode_ioaddr) >> shiftbit;
+ opmode &= OP_MODE_MASK;
+
+ mon_data_ext.iftype[i] = opmode;
+
+ }
+ if (copy_to_user(argp, &mon_data_ext,
+ sizeof(mon_data_ext)))
+ return -EFAULT;
+
+ return 0;
+
+ } default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static int mxser_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct mxser_port *info = tty->driver_data;
+ struct async_icount cprev, cnow; /* kernel counter temps */
+ struct serial_icounter_struct __user *p_cuser;
+ unsigned long templ;
+ unsigned long flags;
+ void __user *argp = (void __user *)arg;
+ int retval;
+
+ if (tty->index == MXSER_PORTS)
+ return mxser_ioctl_special(cmd, argp);
+
+ if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
+ int p;
+ unsigned long opmode;
+ static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
+ int shiftbit;
+ unsigned char val, mask;
+
+ p = tty->index % 4;
+ if (cmd == MOXA_SET_OP_MODE) {
+ if (get_user(opmode, (int __user *) argp))
+ return -EFAULT;
+ if (opmode != RS232_MODE &&
+ opmode != RS485_2WIRE_MODE &&
+ opmode != RS422_MODE &&
+ opmode != RS485_4WIRE_MODE)
+ return -EFAULT;
+ mask = ModeMask[p];
+ shiftbit = p * 2;
+ val = inb(info->opmode_ioaddr);
+ val &= mask;
+ val |= (opmode << shiftbit);
+ outb(val, info->opmode_ioaddr);
+ } else {
+ shiftbit = p * 2;
+ opmode = inb(info->opmode_ioaddr) >> shiftbit;
+ opmode &= OP_MODE_MASK;
+ if (copy_to_user(argp, &opmode, sizeof(int)))
+ return -EFAULT;
+ }
+ return 0;
+ }
+
+ if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
+ test_bit(TTY_IO_ERROR, &tty->flags))
+ return -EIO;
+
+ switch (cmd) {
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ if (!arg)
+ mxser_send_break(info, HZ / 4); /* 1/4 second */
+ return 0;
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
+ return 0;
+ case TIOCGSOFTCAR:
+ return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
+ case TIOCSSOFTCAR:
+ if (get_user(templ, (unsigned long __user *) argp))
+ return -EFAULT;
+ arg = templ;
+ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
+ return 0;
+ case TIOCGSERIAL:
+ return mxser_get_serial_info(info, argp);
+ case TIOCSSERIAL:
+ return mxser_set_serial_info(info, argp);
+ case TIOCSERGETLSR: /* Get line status register */
+ return mxser_get_lsr_info(info, argp);
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+ case TIOCMIWAIT: {
+ DECLARE_WAITQUEUE(wait, current);
+ int ret;
+ spin_lock_irqsave(&info->slock, flags);
+ cprev = info->icount; /* note the counters on entry */
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ add_wait_queue(&info->delta_msr_wait, &wait);
+ while (1) {
+ spin_lock_irqsave(&info->slock, flags);
+ cnow = info->icount; /* atomic copy */
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (((arg & TIOCM_RNG) &&
+ (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) &&
+ (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) &&
+ (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) &&
+ (cnow.cts != cprev.cts))) {
+ ret = 0;
+ break;
+ }
+ /* see if a signal did it */
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+ cprev = cnow;
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&info->delta_msr_wait, &wait);
+ break;
+ }
+ /* NOTREACHED */
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+ case TIOCGICOUNT:
+ spin_lock_irqsave(&info->slock, flags);
+ cnow = info->icount;
+ spin_unlock_irqrestore(&info->slock, flags);
+ p_cuser = argp;
+ if (put_user(cnow.frame, &p_cuser->frame))
+ return -EFAULT;
+ if (put_user(cnow.brk, &p_cuser->brk))
+ return -EFAULT;
+ if (put_user(cnow.overrun, &p_cuser->overrun))
+ return -EFAULT;
+ if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
+ return -EFAULT;
+ if (put_user(cnow.parity, &p_cuser->parity))
+ return -EFAULT;
+ if (put_user(cnow.rx, &p_cuser->rx))
+ return -EFAULT;
+ if (put_user(cnow.tx, &p_cuser->tx))
+ return -EFAULT;
+ put_user(cnow.cts, &p_cuser->cts);
+ put_user(cnow.dsr, &p_cuser->dsr);
+ put_user(cnow.rng, &p_cuser->rng);
+ put_user(cnow.dcd, &p_cuser->dcd);
+ return 0;
+ case MOXA_HighSpeedOn:
+ return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
+ case MOXA_SDS_RSTICOUNTER:
+ info->mon_data.rxcnt = 0;
+ info->mon_data.txcnt = 0;
+ return 0;
+ case MOXA_ASPP_SETBAUD:{
+ long baud;
+ if (get_user(baud, (long __user *)argp))
+ return -EFAULT;
+ mxser_set_baud(info, baud);
+ return 0;
+ }
+ case MOXA_ASPP_GETBAUD:
+ if (copy_to_user(argp, &info->realbaud, sizeof(long)))
+ return -EFAULT;
+
+ return 0;
+
+ case MOXA_ASPP_OQUEUE:{
+ int len, lsr;
+
+ len = mxser_chars_in_buffer(tty);
+
+ lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT;
+
+ len += (lsr ? 0 : 1);
+
+ if (copy_to_user(argp, &len, sizeof(int)))
+ return -EFAULT;
+
+ return 0;
+ }
+ case MOXA_ASPP_MON: {
+ int mcr, status;
+
+ status = mxser_get_msr(info->ioaddr, 1, tty->index);
+ mxser_check_modem_status(info, status);
+
+ mcr = inb(info->ioaddr + UART_MCR);
+ if (mcr & MOXA_MUST_MCR_XON_FLAG)
+ info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
+ else
+ info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
+
+ if (mcr & MOXA_MUST_MCR_TX_XON)
+ info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
+ else
+ info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
+
+ if (info->tty->hw_stopped)
+ info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
+ else
+ info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
+
+ if (copy_to_user(argp, &info->mon_data,
+ sizeof(struct mxser_mon)))
+ return -EFAULT;
+
+ return 0;
+ }
+ case MOXA_ASPP_LSTATUS: {
+ if (copy_to_user(argp, &info->err_shadow,
+ sizeof(unsigned char)))
+ return -EFAULT;
+
+ info->err_shadow = 0;
+ return 0;
+ }
+ case MOXA_SET_BAUD_METHOD: {
+ int method;
+
+ if (get_user(method, (int __user *)argp))
+ return -EFAULT;
+ mxser_set_baud_method[tty->index] = method;
+ if (copy_to_user(argp, &method, sizeof(int)))
+ return -EFAULT;
+
+ return 0;
+ }
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static void mxser_stoprx(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+
+ info->ldisc_stop_rx = 1;
+ if (I_IXOFF(tty)) {
+ if (info->board->chip_flag) {
+ info->IER &= ~MOXA_MUST_RECV_ISR;
+ outb(info->IER, info->ioaddr + UART_IER);
+ } else {
+ info->x_char = STOP_CHAR(tty);
+ outb(0, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ }
+ }
+
+ if (info->tty->termios->c_cflag & CRTSCTS) {
+ info->MCR &= ~UART_MCR_RTS;
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ }
+}
+
+/*
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ */
+static void mxser_throttle(struct tty_struct *tty)
+{
+ mxser_stoprx(tty);
+}
+
+static void mxser_unthrottle(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+
+ /* startrx */
+ info->ldisc_stop_rx = 0;
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else {
+ if (info->board->chip_flag) {
+ info->IER |= MOXA_MUST_RECV_ISR;
+ outb(info->IER, info->ioaddr + UART_IER);
+ } else {
+ info->x_char = START_CHAR(tty);
+ outb(0, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ }
+ }
+ }
+
+ if (info->tty->termios->c_cflag & CRTSCTS) {
+ info->MCR |= UART_MCR_RTS;
+ outb(info->MCR, info->ioaddr + UART_MCR);
+ }
+}
+
+/*
+ * mxser_stop() and mxser_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ */
+static void mxser_stop(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->slock, flags);
+ if (info->IER & UART_IER_THRI) {
+ info->IER &= ~UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ }
+ spin_unlock_irqrestore(&info->slock, flags);
+}
+
+static void mxser_start(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->slock, flags);
+ if (info->xmit_cnt && info->xmit_buf) {
+ outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->ioaddr + UART_IER);
+ }
+ spin_unlock_irqrestore(&info->slock, flags);
+}
+
+static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
+
+ if ((tty->termios->c_cflag != old_termios->c_cflag) ||
+ (RELEVANT_IFLAG(tty->termios->c_iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) {
+
+ mxser_change_speed(info, old_termios);
+
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ mxser_start(tty);
+ }
+ }
+
+ /* Handle sw stopped */
+ if ((old_termios->c_iflag & IXON) &&
+ !(tty->termios->c_iflag & IXON)) {
+ tty->stopped = 0;
+
+ if (info->board->chip_flag) {
+ spin_lock_irqsave(&info->slock, flags);
+ DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
+ spin_unlock_irqrestore(&info->slock, flags);
+ }
+
+ mxser_start(tty);
+ }
+}
+
+/*
+ * mxser_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long orig_jiffies, char_time;
+ int lsr;
+
+ if (info->type == PORT_UNKNOWN)
+ return;
+
+ if (info->xmit_fifo_size == 0)
+ return; /* Just in case.... */
+
+ orig_jiffies = jiffies;
+ /*
+ * Set the check interval to be 1/5 of the estimated time to
+ * send a single character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
+ char_time = char_time / 5;
+ if (char_time == 0)
+ char_time = 1;
+ if (timeout && timeout < char_time)
+ char_time = timeout;
+ /*
+ * If the transmitter hasn't cleared in twice the approximate
+ * amount of time to send the entire FIFO, it probably won't
+ * ever clear. This assumes the UART isn't doing flow
+ * control, which is currently the case. Hence, if it ever
+ * takes longer than info->timeout, this is probably due to a
+ * UART bug of some kind. So, we clamp the timeout parameter at
+ * 2*info->timeout.
+ */
+ if (!timeout || timeout > 2 * info->timeout)
+ timeout = 2 * info->timeout;
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...",
+ timeout, char_time);
+ printk("jiff=%lu...", jiffies);
+#endif
+ while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
+#endif
+ schedule_timeout_interruptible(char_time);
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
+ }
+ set_current_state(TASK_RUNNING);
+
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
+#endif
+}
+
+/*
+ * This routine is called by tty_hangup() when a hangup is signaled.
+ */
+void mxser_hangup(struct tty_struct *tty)
+{
+ struct mxser_port *info = tty->driver_data;
+
+ mxser_flush_buffer(tty);
+ mxser_shutdown(info);
+ info->event = 0;
+ info->count = 0;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tty = NULL;
+ wake_up_interruptible(&info->open_wait);
+}
+
+/*
+ * mxser_rs_break() --- routine which turns the break handling on or off
+ */
+static void mxser_rs_break(struct tty_struct *tty, int break_state)
+{
+ struct mxser_port *info = tty->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->slock, flags);
+ if (break_state == -1)
+ outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
+ info->ioaddr + UART_LCR);
+ else
+ outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
+ info->ioaddr + UART_LCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+}
+
+static void mxser_receive_chars(struct mxser_port *port, int *status)
+{
+ struct tty_struct *tty = port->tty;
+ unsigned char ch, gdl;
+ int ignored = 0;
+ int cnt = 0;
+ int recv_room;
+ int max = 256;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->slock, flags);
+
+ recv_room = tty->receive_room;
+ if ((recv_room == 0) && (!port->ldisc_stop_rx))
+ mxser_stoprx(tty);
+
+ if (port->board->chip_flag != MOXA_OTHER_UART) {
+
+ if (*status & UART_LSR_SPECIAL)
+ goto intr_old;
+ if (port->board->chip_flag == MOXA_MUST_MU860_HWID &&
+ (*status & MOXA_MUST_LSR_RERR))
+ goto intr_old;
+ if (*status & MOXA_MUST_LSR_RERR)
+ goto intr_old;
+
+ gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER);
+
+ if (port->board->chip_flag == MOXA_MUST_MU150_HWID)
+ gdl &= MOXA_MUST_GDL_MASK;
+ if (gdl >= recv_room) {
+ if (!port->ldisc_stop_rx)
+ mxser_stoprx(tty);
+ }
+ while (gdl--) {
+ ch = inb(port->ioaddr + UART_RX);
+ tty_insert_flip_char(tty, ch, 0);
+ cnt++;
+ }
+ goto end_intr;
+ }
+intr_old:
+
+ do {
+ if (max-- < 0)
+ break;
+
+ ch = inb(port->ioaddr + UART_RX);
+ if (port->board->chip_flag && (*status & UART_LSR_OE))
+ outb(0x23, port->ioaddr + UART_FCR);
+ *status &= port->read_status_mask;
+ if (*status & port->ignore_status_mask) {
+ if (++ignored > 100)
+ break;
+ } else {
+ char flag = 0;
+ if (*status & UART_LSR_SPECIAL) {
+ if (*status & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ port->icount.brk++;
+
+ if (port->flags & ASYNC_SAK)
+ do_SAK(tty);
+ } else if (*status & UART_LSR_PE) {
+ flag = TTY_PARITY;
+ port->icount.parity++;
+ } else if (*status & UART_LSR_FE) {
+ flag = TTY_FRAME;
+ port->icount.frame++;
+ } else if (*status & UART_LSR_OE) {
+ flag = TTY_OVERRUN;
+ port->icount.overrun++;
+ }
+ }
+ tty_insert_flip_char(tty, ch, flag);
+ cnt++;
+ if (cnt >= recv_room) {
+ if (!port->ldisc_stop_rx)
+ mxser_stoprx(tty);
+ break;
+ }
+
+ }
+
+ if (port->board->chip_flag)
+ break;
+
+ *status = inb(port->ioaddr + UART_LSR);
+ } while (*status & UART_LSR_DR);
+
+end_intr:
+ mxvar_log.rxcnt[port->tty->index] += cnt;
+ port->mon_data.rxcnt += cnt;
+ port->mon_data.up_rxcnt += cnt;
+ spin_unlock_irqrestore(&port->slock, flags);
+
+ tty_flip_buffer_push(tty);
+}
+
+static void mxser_transmit_chars(struct mxser_port *port)
+{
+ int count, cnt;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->slock, flags);
+
+ if (port->x_char) {
+ outb(port->x_char, port->ioaddr + UART_TX);
+ port->x_char = 0;
+ mxvar_log.txcnt[port->tty->index]++;
+ port->mon_data.txcnt++;
+ port->mon_data.up_txcnt++;
+ port->icount.tx++;
+ goto unlock;
+ }
+
+ if (port->xmit_buf == 0)
+ goto unlock;
+
+ if ((port->xmit_cnt <= 0) || port->tty->stopped ||
+ (port->tty->hw_stopped &&
+ (port->type != PORT_16550A) &&
+ (!port->board->chip_flag))) {
+ port->IER &= ~UART_IER_THRI;
+ outb(port->IER, port->ioaddr + UART_IER);
+ goto unlock;
+ }
+
+ cnt = port->xmit_cnt;
+ count = port->xmit_fifo_size;
+ do {
+ outb(port->xmit_buf[port->xmit_tail++],
+ port->ioaddr + UART_TX);
+ port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1);
+ if (--port->xmit_cnt <= 0)
+ break;
+ } while (--count > 0);
+ mxvar_log.txcnt[port->tty->index] += (cnt - port->xmit_cnt);
+
+ port->mon_data.txcnt += (cnt - port->xmit_cnt);
+ port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
+ port->icount.tx += (cnt - port->xmit_cnt);
+
+ if (port->xmit_cnt < WAKEUP_CHARS) {
+ set_bit(MXSER_EVENT_TXLOW, &port->event);
+ schedule_work(&port->tqueue);
+ }
+ if (port->xmit_cnt <= 0) {
+ port->IER &= ~UART_IER_THRI;
+ outb(port->IER, port->ioaddr + UART_IER);
+ }
+unlock:
+ spin_unlock_irqrestore(&port->slock, flags);
+}
+
+/*
+ * This is the serial driver's generic interrupt routine
+ */
+static irqreturn_t mxser_interrupt(int irq, void *dev_id)
+{
+ int status, iir, i;
+ struct mxser_board *brd = NULL;
+ struct mxser_port *port;
+ int max, irqbits, bits, msr;
+ int pass_counter = 0;
+ unsigned int int_cnt;
+ int handled = IRQ_NONE;
+
+ for (i = 0; i < MXSER_BOARDS; i++)
+ if (dev_id == &mxser_boards[i]) {
+ brd = dev_id;
+ break;
+ }
+
+ if (i == MXSER_BOARDS)
+ goto irq_stop;
+ if (brd == NULL)
+ goto irq_stop;
+ max = brd->info->nports;
+ while (1) {
+ irqbits = inb(brd->vector) & brd->vector_mask;
+ if (irqbits == brd->vector_mask)
+ break;
+
+ handled = IRQ_HANDLED;
+ for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
+ if (irqbits == brd->vector_mask)
+ break;
+ if (bits & irqbits)
+ continue;
+ port = &brd->ports[i];
+
+ int_cnt = 0;
+ do {
+ iir = inb(port->ioaddr + UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ break;
+ iir &= MOXA_MUST_IIR_MASK;
+ if (!port->tty) {
+ status = inb(port->ioaddr + UART_LSR);
+ outb(0x27, port->ioaddr + UART_FCR);
+ inb(port->ioaddr + UART_MSR);
+ break;
+ }
+
+ status = inb(port->ioaddr + UART_LSR);
+
+ if (status & UART_LSR_PE)
+ port->err_shadow |= NPPI_NOTIFY_PARITY;
+ if (status & UART_LSR_FE)
+ port->err_shadow |= NPPI_NOTIFY_FRAMING;
+ if (status & UART_LSR_OE)
+ port->err_shadow |=
+ NPPI_NOTIFY_HW_OVERRUN;
+ if (status & UART_LSR_BI)
+ port->err_shadow |= NPPI_NOTIFY_BREAK;
+
+ if (port->board->chip_flag) {
+ if (iir == MOXA_MUST_IIR_GDA ||
+ iir == MOXA_MUST_IIR_RDA ||
+ iir == MOXA_MUST_IIR_RTO ||
+ iir == MOXA_MUST_IIR_LSR)
+ mxser_receive_chars(port,
+ &status);
+
+ } else {
+ status &= port->read_status_mask;
+ if (status & UART_LSR_DR)
+ mxser_receive_chars(port,
+ &status);
+ }
+ msr = inb(port->ioaddr + UART_MSR);
+ if (msr & UART_MSR_ANY_DELTA)
+ mxser_check_modem_status(port, msr);
+
+ if (port->board->chip_flag) {
+ if (iir == 0x02 && (status &
+ UART_LSR_THRE))
+ mxser_transmit_chars(port);
+ } else {
+ if (status & UART_LSR_THRE)
+ mxser_transmit_chars(port);
+ }
+ } while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
+ }
+ if (pass_counter++ > MXSER_ISR_PASS_LIMIT)
+ break; /* Prevent infinite loops */
+ }
+
+irq_stop:
+ return handled;
+}
+
+static const struct tty_operations mxser_ops = {
+ .open = mxser_open,
+ .close = mxser_close,
+ .write = mxser_write,
+ .put_char = mxser_put_char,
+ .flush_chars = mxser_flush_chars,
+ .write_room = mxser_write_room,
+ .chars_in_buffer = mxser_chars_in_buffer,
+ .flush_buffer = mxser_flush_buffer,
+ .ioctl = mxser_ioctl,
+ .throttle = mxser_throttle,
+ .unthrottle = mxser_unthrottle,
+ .set_termios = mxser_set_termios,
+ .stop = mxser_stop,
+ .start = mxser_start,
+ .hangup = mxser_hangup,
+ .break_ctl = mxser_rs_break,
+ .wait_until_sent = mxser_wait_until_sent,
+ .tiocmget = mxser_tiocmget,
+ .tiocmset = mxser_tiocmset,
+};
+
+/*
+ * The MOXA Smartio/Industio serial driver boot-time initialization code!
+ */
+
+static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
+ unsigned int irq)
+{
+ if (irq)
+ free_irq(brd->irq, brd);
+ if (pdev != NULL) { /* PCI */
+#ifdef CONFIG_PCI
+ pci_release_region(pdev, 2);
+ pci_release_region(pdev, 3);
+ pci_dev_put(pdev);
+#endif
+ } else {
+ release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+ release_region(brd->vector, 1);
+ }
+}
+
+static int __devinit mxser_initbrd(struct mxser_board *brd,
+ struct pci_dev *pdev)
+{
+ struct mxser_port *info;
+ unsigned int i;
+ int retval;
+
+ printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud);
+
+ for (i = 0; i < brd->info->nports; i++) {
+ info = &brd->ports[i];
+ info->board = brd;
+ info->stop_rx = 0;
+ info->ldisc_stop_rx = 0;
+
+ /* Enhance mode enabled here */
+ if (brd->chip_flag != MOXA_OTHER_UART)
+ ENABLE_MOXA_MUST_ENCHANCE_MODE(info->ioaddr);
+
+ info->flags = ASYNC_SHARE_IRQ;
+ info->type = brd->uart_type;
+
+ process_txrx_fifo(info);
+
+ info->custom_divisor = info->baud_base * 16;
+ info->close_delay = 5 * HZ / 10;
+ info->closing_wait = 30 * HZ;
+ INIT_WORK(&info->tqueue, mxser_do_softint);
+ info->normal_termios = mxvar_sdriver->init_termios;
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ init_waitqueue_head(&info->delta_msr_wait);
+ memset(&info->mon_data, 0, sizeof(struct mxser_mon));
+ info->err_shadow = 0;
+ spin_lock_init(&info->slock);
+
+ /* before set INT ISR, disable all int */
+ outb(inb(info->ioaddr + UART_IER) & 0xf0,
+ info->ioaddr + UART_IER);
+ }
+ /*
+ * Allocate the IRQ if necessary
+ */
+
+ retval = request_irq(brd->irq, mxser_interrupt,
+ (brd->ports[0].flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED :
+ IRQF_DISABLED, "mxser", brd);
+ if (retval) {
+ printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
+ "conflict with another device.\n",
+ brd->info->name, brd->irq);
+ /* We hold resources, we need to release them. */
+ mxser_release_res(brd, pdev, 0);
+ return retval;
+ }
+ return 0;
+}
+
+static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
+{
+ int id, i, bits;
+ unsigned short regs[16], irq;
+ unsigned char scratch, scratch2;
+
+ brd->chip_flag = MOXA_OTHER_UART;
+
+ id = mxser_read_register(cap, regs);
+ switch (id) {
+ case C168_ASIC_ID:
+ brd->info = &mxser_cards[0];
+ break;
+ case C104_ASIC_ID:
+ brd->info = &mxser_cards[1];
+ break;
+ case CI104J_ASIC_ID:
+ brd->info = &mxser_cards[2];
+ break;
+ case C102_ASIC_ID:
+ brd->info = &mxser_cards[5];
+ break;
+ case CI132_ASIC_ID:
+ brd->info = &mxser_cards[6];
+ break;
+ case CI134_ASIC_ID:
+ brd->info = &mxser_cards[7];
+ break;
+ default:
+ return 0;
+ }
+
+ irq = 0;
+ /* some ISA cards have 2 ports, but we want to see them as 4-port (why?)
+ Flag-hack checks if configuration should be read as 2-port here. */
+ if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) {
+ irq = regs[9] & 0xF000;
+ irq = irq | (irq >> 4);
+ if (irq != (regs[9] & 0xFF00))
+ return MXSER_ERR_IRQ_CONFLIT;
+ } else if (brd->info->nports == 4) {
+ irq = regs[9] & 0xF000;
+ irq = irq | (irq >> 4);
+ irq = irq | (irq >> 8);
+ if (irq != regs[9])
+ return MXSER_ERR_IRQ_CONFLIT;
+ } else if (brd->info->nports == 8) {
+ irq = regs[9] & 0xF000;
+ irq = irq | (irq >> 4);
+ irq = irq | (irq >> 8);
+ if ((irq != regs[9]) || (irq != regs[10]))
+ return MXSER_ERR_IRQ_CONFLIT;
+ }
+
+ if (!irq)
+ return MXSER_ERR_IRQ;
+ brd->irq = ((int)(irq & 0xF000) >> 12);
+ for (i = 0; i < 8; i++)
+ brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
+ if ((regs[12] & 0x80) == 0)
+ return MXSER_ERR_VECTOR;
+ brd->vector = (int)regs[11]; /* interrupt vector */
+ if (id == 1)
+ brd->vector_mask = 0x00FF;
+ else
+ brd->vector_mask = 0x000F;
+ for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
+ if (regs[12] & bits) {
+ brd->ports[i].baud_base = 921600;
+ brd->ports[i].max_baud = 921600;
+ } else {
+ brd->ports[i].baud_base = 115200;
+ brd->ports[i].max_baud = 115200;
+ }
+ }
+ scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
+ outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR);
+ outb(0, cap + UART_EFR); /* EFR is the same as FCR */
+ outb(scratch2, cap + UART_LCR);
+ outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR);
+ scratch = inb(cap + UART_IIR);
+
+ if (scratch & 0xC0)
+ brd->uart_type = PORT_16550A;
+ else
+ brd->uart_type = PORT_16450;
+ if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
+ "mxser(IO)"))
+ return MXSER_ERR_IOADDR;
+ if (!request_region(brd->vector, 1, "mxser(vector)")) {
+ release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+ return MXSER_ERR_VECTOR;
+ }
+ return brd->info->nports;
+}
+
+static int __devinit mxser_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+#ifdef CONFIG_PCI
+ struct mxser_board *brd;
+ unsigned int i, j;
+ unsigned long ioaddress;
+ int retval = -EINVAL;
+
+ for (i = 0; i < MXSER_BOARDS; i++)
+ if (mxser_boards[i].info == NULL)
+ break;
+
+ if (i >= MXSER_BOARDS) {
+ printk(KERN_ERR "Too many Smartio/Industio family boards found "
+ "(maximum %d), board not configured\n", MXSER_BOARDS);
+ goto err;
+ }
+
+ brd = &mxser_boards[i];
+ brd->idx = i * MXSER_PORTS_PER_BOARD;
+ printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n",
+ mxser_cards[ent->driver_data].name,
+ pdev->bus->number, PCI_SLOT(pdev->devfn));
+
+ retval = pci_enable_device(pdev);
+ if (retval) {
+ printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n");
+ goto err;
+ }
+
+ /* io address */
+ ioaddress = pci_resource_start(pdev, 2);
+ retval = pci_request_region(pdev, 2, "mxser(IO)");
+ if (retval)
+ goto err;
+
+ brd->info = &mxser_cards[ent->driver_data];
+ for (i = 0; i < brd->info->nports; i++)
+ brd->ports[i].ioaddr = ioaddress + 8 * i;
+
+ /* vector */
+ ioaddress = pci_resource_start(pdev, 3);
+ retval = pci_request_region(pdev, 3, "mxser(vector)");
+ if (retval)
+ goto err_relio;
+ brd->vector = ioaddress;
+
+ /* irq */
+ brd->irq = pdev->irq;
+
+ brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr);
+ brd->uart_type = PORT_16550A;
+ brd->vector_mask = 0;
+
+ for (i = 0; i < brd->info->nports; i++) {
+ for (j = 0; j < UART_INFO_NUM; j++) {
+ if (Gpci_uart_info[j].type == brd->chip_flag) {
+ brd->ports[i].max_baud =
+ Gpci_uart_info[j].max_baud;
+
+ /* exception....CP-102 */
+ if (brd->info->flags & MXSER_HIGHBAUD)
+ brd->ports[i].max_baud = 921600;
+ break;
+ }
+ }
+ }
+
+ if (brd->chip_flag == MOXA_MUST_MU860_HWID) {
+ for (i = 0; i < brd->info->nports; i++) {
+ if (i < 4)
+ brd->ports[i].opmode_ioaddr = ioaddress + 4;
+ else
+ brd->ports[i].opmode_ioaddr = ioaddress + 0x0c;
+ }
+ outb(0, ioaddress + 4); /* default set to RS232 mode */
+ outb(0, ioaddress + 0x0c); /* default set to RS232 mode */
+ }
+
+ for (i = 0; i < brd->info->nports; i++) {
+ brd->vector_mask |= (1 << i);
+ brd->ports[i].baud_base = 921600;
+ }
+
+ /* mxser_initbrd will hook ISR. */
+ if (mxser_initbrd(brd, pdev) < 0)
+ goto err_relvec;
+
+ for (i = 0; i < brd->info->nports; i++)
+ tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
+
+ pci_set_drvdata(pdev, brd);
+
+ return 0;
+err_relvec:
+ pci_release_region(pdev, 3);
+err_relio:
+ pci_release_region(pdev, 2);
+ brd->info = NULL;
+err:
+ return retval;
+#else
+ return -ENODEV;
+#endif
+}
+
+static void __devexit mxser_remove(struct pci_dev *pdev)
+{
+ struct mxser_board *brd = pci_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < brd->info->nports; i++)
+ tty_unregister_device(mxvar_sdriver, brd->idx + i);
+
+ mxser_release_res(brd, pdev, 1);
+}
+
+static struct pci_driver mxser_driver = {
+ .name = "mxser",
+ .id_table = mxser_pcibrds,
+ .probe = mxser_probe,
+ .remove = __devexit_p(mxser_remove)
+};
+
+static int __init mxser_module_init(void)
+{
+ struct mxser_board *brd;
+ unsigned long cap;
+ unsigned int i, m, isaloop;
+ int retval, b;
+
+ pr_debug("Loading module mxser ...\n");
+
+ mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
+ if (!mxvar_sdriver)
+ return -ENOMEM;
+ spin_lock_init(&gm_lock);
+
+ printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n",
+ MXSER_VERSION);
+
+ /* Initialize the tty_driver structure */
+ mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
+ mxvar_sdriver->name = "ttyMI";
+ mxvar_sdriver->major = ttymajor;
+ mxvar_sdriver->minor_start = 0;
+ mxvar_sdriver->num = MXSER_PORTS + 1;
+ mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
+ mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
+ mxvar_sdriver->init_termios = tty_std_termios;
+ mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
+ mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV;
+ tty_set_operations(mxvar_sdriver, &mxser_ops);
+
+ retval = tty_register_driver(mxvar_sdriver);
+ if (retval) {
+ printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family "
+ "tty driver !\n");
+ goto err_put;
+ }
+
+ mxvar_diagflag = 0;
+
+ m = 0;
+ /* Start finding ISA boards here */
+ for (isaloop = 0; isaloop < 2; isaloop++)
+ for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) {
+ if (!isaloop)
+ cap = mxserBoardCAP[b]; /* predefined */
+ else
+ cap = ioaddr[b]; /* module param */
+
+ if (!cap)
+ continue;
+
+ brd = &mxser_boards[m];
+ retval = mxser_get_ISA_conf(cap, brd);
+
+ if (retval != 0)
+ printk(KERN_INFO "Found MOXA %s board "
+ "(CAP=0x%x)\n",
+ brd->info->name, ioaddr[b]);
+
+ if (retval <= 0) {
+ if (retval == MXSER_ERR_IRQ)
+ printk(KERN_ERR "Invalid interrupt "
+ "number, board not "
+ "configured\n");
+ else if (retval == MXSER_ERR_IRQ_CONFLIT)
+ printk(KERN_ERR "Invalid interrupt "
+ "number, board not "
+ "configured\n");
+ else if (retval == MXSER_ERR_VECTOR)
+ printk(KERN_ERR "Invalid interrupt "
+ "vector, board not "
+ "configured\n");
+ else if (retval == MXSER_ERR_IOADDR)
+ printk(KERN_ERR "Invalid I/O address, "
+ "board not configured\n");
+
+ brd->info = NULL;
+ continue;
+ }
+
+ /* mxser_initbrd will hook ISR. */
+ if (mxser_initbrd(brd, NULL) < 0) {
+ brd->info = NULL;
+ continue;
+ }
+
+ brd->idx = m * MXSER_PORTS_PER_BOARD;
+ for (i = 0; i < brd->info->nports; i++)
+ tty_register_device(mxvar_sdriver, brd->idx + i,
+ NULL);
+
+ m++;
+ }
+
+ retval = pci_register_driver(&mxser_driver);
+ if (retval) {
+ printk(KERN_ERR "Can't register pci driver\n");
+ if (!m) {
+ retval = -ENODEV;
+ goto err_unr;
+ } /* else: we have some ISA cards under control */
+ }
+
+ pr_debug("Done.\n");
+
+ return 0;
+err_unr:
+ tty_unregister_driver(mxvar_sdriver);
+err_put:
+ put_tty_driver(mxvar_sdriver);
+ return retval;
+}
+
+static void __exit mxser_module_exit(void)
+{
+ unsigned int i, j;
+
+ pr_debug("Unloading module mxser ...\n");
+
+ pci_unregister_driver(&mxser_driver);
+
+ for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
+ if (mxser_boards[i].info != NULL)
+ for (j = 0; j < mxser_boards[i].info->nports; j++)
+ tty_unregister_device(mxvar_sdriver,
+ mxser_boards[i].idx + j);
+ tty_unregister_driver(mxvar_sdriver);
+ put_tty_driver(mxvar_sdriver);
+
+ for (i = 0; i < MXSER_BOARDS; i++)
+ if (mxser_boards[i].info != NULL)
+ mxser_release_res(&mxser_boards[i], NULL, 1);
+
+ pr_debug("Done.\n");
+}
+
+module_init(mxser_module_init);
+module_exit(mxser_module_exit);
--- /dev/null
+#ifndef _MXSER_H
+#define _MXSER_H
+
+/*
+ * Semi-public control interfaces
+ */
+
+/*
+ * MOXA ioctls
+ */
+
+#define MOXA 0x400
+#define MOXA_GETDATACOUNT (MOXA + 23)
+#define MOXA_GET_CONF (MOXA + 35)
+#define MOXA_DIAGNOSE (MOXA + 50)
+#define MOXA_CHKPORTENABLE (MOXA + 60)
+#define MOXA_HighSpeedOn (MOXA + 61)
+#define MOXA_GET_MAJOR (MOXA + 63)
+#define MOXA_GET_CUMAJOR (MOXA + 64)
+#define MOXA_GETMSTATUS (MOXA + 65)
+#define MOXA_SET_OP_MODE (MOXA + 66)
+#define MOXA_GET_OP_MODE (MOXA + 67)
+
+#define RS232_MODE 0
+#define RS485_2WIRE_MODE 1
+#define RS422_MODE 2
+#define RS485_4WIRE_MODE 3
+#define OP_MODE_MASK 3
+// above add by Victor Yu. 01-05-2004
+
+#define TTY_THRESHOLD_THROTTLE 128
+
+#define LO_WATER (TTY_FLIPBUF_SIZE)
+#define HI_WATER (TTY_FLIPBUF_SIZE*2*3/4)
+
+// added by James. 03-11-2004.
+#define MOXA_SDS_GETICOUNTER (MOXA + 68)
+#define MOXA_SDS_RSTICOUNTER (MOXA + 69)
+// (above) added by James.
+
+#define MOXA_ASPP_OQUEUE (MOXA + 70)
+#define MOXA_ASPP_SETBAUD (MOXA + 71)
+#define MOXA_ASPP_GETBAUD (MOXA + 72)
+#define MOXA_ASPP_MON (MOXA + 73)
+#define MOXA_ASPP_LSTATUS (MOXA + 74)
+#define MOXA_ASPP_MON_EXT (MOXA + 75)
+#define MOXA_SET_BAUD_METHOD (MOXA + 76)
+
+
+/* --------------------------------------------------- */
+
+#define NPPI_NOTIFY_PARITY 0x01
+#define NPPI_NOTIFY_FRAMING 0x02
+#define NPPI_NOTIFY_HW_OVERRUN 0x04
+#define NPPI_NOTIFY_SW_OVERRUN 0x08
+#define NPPI_NOTIFY_BREAK 0x10
+
+#define NPPI_NOTIFY_CTSHOLD 0x01 // Tx hold by CTS low
+#define NPPI_NOTIFY_DSRHOLD 0x02 // Tx hold by DSR low
+#define NPPI_NOTIFY_XOFFHOLD 0x08 // Tx hold by Xoff received
+#define NPPI_NOTIFY_XOFFXENT 0x10 // Xoff Sent
+
+//CheckIsMoxaMust return value
+#define MOXA_OTHER_UART 0x00
+#define MOXA_MUST_MU150_HWID 0x01
+#define MOXA_MUST_MU860_HWID 0x02
+
+// follow just for Moxa Must chip define.
+//
+// when LCR register (offset 0x03) write following value,
+// the Must chip will enter enchance mode. And write value
+// on EFR (offset 0x02) bit 6,7 to change bank.
+#define MOXA_MUST_ENTER_ENCHANCE 0xBF
+
+// when enhance mode enable, access on general bank register
+#define MOXA_MUST_GDL_REGISTER 0x07
+#define MOXA_MUST_GDL_MASK 0x7F
+#define MOXA_MUST_GDL_HAS_BAD_DATA 0x80
+
+#define MOXA_MUST_LSR_RERR 0x80 // error in receive FIFO
+// enchance register bank select and enchance mode setting register
+// when LCR register equal to 0xBF
+#define MOXA_MUST_EFR_REGISTER 0x02
+// enchance mode enable
+#define MOXA_MUST_EFR_EFRB_ENABLE 0x10
+// enchance reister bank set 0, 1, 2
+#define MOXA_MUST_EFR_BANK0 0x00
+#define MOXA_MUST_EFR_BANK1 0x40
+#define MOXA_MUST_EFR_BANK2 0x80
+#define MOXA_MUST_EFR_BANK3 0xC0
+#define MOXA_MUST_EFR_BANK_MASK 0xC0
+
+// set XON1 value register, when LCR=0xBF and change to bank0
+#define MOXA_MUST_XON1_REGISTER 0x04
+
+// set XON2 value register, when LCR=0xBF and change to bank0
+#define MOXA_MUST_XON2_REGISTER 0x05
+
+// set XOFF1 value register, when LCR=0xBF and change to bank0
+#define MOXA_MUST_XOFF1_REGISTER 0x06
+
+// set XOFF2 value register, when LCR=0xBF and change to bank0
+#define MOXA_MUST_XOFF2_REGISTER 0x07
+
+#define MOXA_MUST_RBRTL_REGISTER 0x04
+#define MOXA_MUST_RBRTH_REGISTER 0x05
+#define MOXA_MUST_RBRTI_REGISTER 0x06
+#define MOXA_MUST_THRTL_REGISTER 0x07
+#define MOXA_MUST_ENUM_REGISTER 0x04
+#define MOXA_MUST_HWID_REGISTER 0x05
+#define MOXA_MUST_ECR_REGISTER 0x06
+#define MOXA_MUST_CSR_REGISTER 0x07
+
+// good data mode enable
+#define MOXA_MUST_FCR_GDA_MODE_ENABLE 0x20
+// only good data put into RxFIFO
+#define MOXA_MUST_FCR_GDA_ONLY_ENABLE 0x10
+
+// enable CTS interrupt
+#define MOXA_MUST_IER_ECTSI 0x80
+// enable RTS interrupt
+#define MOXA_MUST_IER_ERTSI 0x40
+// enable Xon/Xoff interrupt
+#define MOXA_MUST_IER_XINT 0x20
+// enable GDA interrupt
+#define MOXA_MUST_IER_EGDAI 0x10
+
+#define MOXA_MUST_RECV_ISR (UART_IER_RDI | MOXA_MUST_IER_EGDAI)
+
+// GDA interrupt pending
+#define MOXA_MUST_IIR_GDA 0x1C
+#define MOXA_MUST_IIR_RDA 0x04
+#define MOXA_MUST_IIR_RTO 0x0C
+#define MOXA_MUST_IIR_LSR 0x06
+
+// recieved Xon/Xoff or specical interrupt pending
+#define MOXA_MUST_IIR_XSC 0x10
+
+// RTS/CTS change state interrupt pending
+#define MOXA_MUST_IIR_RTSCTS 0x20
+#define MOXA_MUST_IIR_MASK 0x3E
+
+#define MOXA_MUST_MCR_XON_FLAG 0x40
+#define MOXA_MUST_MCR_XON_ANY 0x80
+#define MOXA_MUST_MCR_TX_XON 0x08
+
+
+// software flow control on chip mask value
+#define MOXA_MUST_EFR_SF_MASK 0x0F
+// send Xon1/Xoff1
+#define MOXA_MUST_EFR_SF_TX1 0x08
+// send Xon2/Xoff2
+#define MOXA_MUST_EFR_SF_TX2 0x04
+// send Xon1,Xon2/Xoff1,Xoff2
+#define MOXA_MUST_EFR_SF_TX12 0x0C
+// don't send Xon/Xoff
+#define MOXA_MUST_EFR_SF_TX_NO 0x00
+// Tx software flow control mask
+#define MOXA_MUST_EFR_SF_TX_MASK 0x0C
+// don't receive Xon/Xoff
+#define MOXA_MUST_EFR_SF_RX_NO 0x00
+// receive Xon1/Xoff1
+#define MOXA_MUST_EFR_SF_RX1 0x02
+// receive Xon2/Xoff2
+#define MOXA_MUST_EFR_SF_RX2 0x01
+// receive Xon1,Xon2/Xoff1,Xoff2
+#define MOXA_MUST_EFR_SF_RX12 0x03
+// Rx software flow control mask
+#define MOXA_MUST_EFR_SF_RX_MASK 0x03
+
+//#define MOXA_MUST_MIN_XOFFLIMIT 66
+//#define MOXA_MUST_MIN_XONLIMIT 20
+//#define ID1_RX_TRIG 120
+
+
+#define CHECK_MOXA_MUST_XOFFLIMIT(info) { \
+ if ( (info)->IsMoxaMustChipFlag && \
+ (info)->HandFlow.XoffLimit < MOXA_MUST_MIN_XOFFLIMIT ) { \
+ (info)->HandFlow.XoffLimit = MOXA_MUST_MIN_XOFFLIMIT; \
+ (info)->HandFlow.XonLimit = MOXA_MUST_MIN_XONLIMIT; \
+ } \
+}
+
+#define ENABLE_MOXA_MUST_ENCHANCE_MODE(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr |= MOXA_MUST_EFR_EFRB_ENABLE; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define DISABLE_MOXA_MUST_ENCHANCE_MODE(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_XON1_VALUE(baseio, Value) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK0; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)(Value), (baseio)+MOXA_MUST_XON1_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_XON2_VALUE(baseio, Value) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK0; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)(Value), (baseio)+MOXA_MUST_XON2_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_XOFF1_VALUE(baseio, Value) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK0; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)(Value), (baseio)+MOXA_MUST_XOFF1_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_XOFF2_VALUE(baseio, Value) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK0; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)(Value), (baseio)+MOXA_MUST_XOFF2_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_RBRTL_VALUE(baseio, Value) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK1; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)(Value), (baseio)+MOXA_MUST_RBRTL_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_RBRTH_VALUE(baseio, Value) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK1; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)(Value), (baseio)+MOXA_MUST_RBRTH_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_RBRTI_VALUE(baseio, Value) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK1; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)(Value), (baseio)+MOXA_MUST_RBRTI_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_THRTL_VALUE(baseio, Value) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK1; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)(Value), (baseio)+MOXA_MUST_THRTL_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+//#define MOXA_MUST_RBRL_VALUE 4
+#define SET_MOXA_MUST_FIFO_VALUE(info) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((info)->ioaddr+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (info)->ioaddr+UART_LCR); \
+ __efr = inb((info)->ioaddr+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK1; \
+ outb(__efr, (info)->ioaddr+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)((info)->rx_high_water), (info)->ioaddr+MOXA_MUST_RBRTH_REGISTER); \
+ outb((u8)((info)->rx_trigger), (info)->ioaddr+MOXA_MUST_RBRTI_REGISTER); \
+ outb((u8)((info)->rx_low_water), (info)->ioaddr+MOXA_MUST_RBRTL_REGISTER); \
+ outb(__oldlcr, (info)->ioaddr+UART_LCR); \
+}
+
+
+
+#define SET_MOXA_MUST_ENUM_VALUE(baseio, Value) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK2; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb((u8)(Value), (baseio)+MOXA_MUST_ENUM_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define GET_MOXA_MUST_HARDWARE_ID(baseio, pId) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_BANK_MASK; \
+ __efr |= MOXA_MUST_EFR_BANK2; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ *pId = inb((baseio)+MOXA_MUST_HWID_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_SF_MASK; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_JUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_SF_MASK; \
+ __efr |= MOXA_MUST_EFR_SF_TX1; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \
+ __efr |= MOXA_MUST_EFR_SF_TX1; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_SF_TX_MASK; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define SET_MOXA_MUST_JUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_SF_MASK; \
+ __efr |= MOXA_MUST_EFR_SF_RX1; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \
+ __efr |= MOXA_MUST_EFR_SF_RX1; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_SF_RX_MASK; \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define ENABLE_MOXA_MUST_TX_RX_SOFTWARE_FLOW_CONTROL(baseio) { \
+ u8 __oldlcr, __efr; \
+ __oldlcr = inb((baseio)+UART_LCR); \
+ outb(MOXA_MUST_ENTER_ENCHANCE, (baseio)+UART_LCR); \
+ __efr = inb((baseio)+MOXA_MUST_EFR_REGISTER); \
+ __efr &= ~MOXA_MUST_EFR_SF_MASK; \
+ __efr |= (MOXA_MUST_EFR_SF_RX1|MOXA_MUST_EFR_SF_TX1); \
+ outb(__efr, (baseio)+MOXA_MUST_EFR_REGISTER); \
+ outb(__oldlcr, (baseio)+UART_LCR); \
+}
+
+#define ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(baseio) { \
+ u8 __oldmcr; \
+ __oldmcr = inb((baseio)+UART_MCR); \
+ __oldmcr |= MOXA_MUST_MCR_XON_ANY; \
+ outb(__oldmcr, (baseio)+UART_MCR); \
+}
+
+#define DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(baseio) { \
+ u8 __oldmcr; \
+ __oldmcr = inb((baseio)+UART_MCR); \
+ __oldmcr &= ~MOXA_MUST_MCR_XON_ANY; \
+ outb(__oldmcr, (baseio)+UART_MCR); \
+}
+
+#define READ_MOXA_MUST_GDL(baseio) inb((baseio)+MOXA_MUST_GDL_REGISTER)
+
+
+#ifndef INIT_WORK
+#define INIT_WORK(_work, _func, _data){ \
+ _data->tqueue.routine = _func;\
+ _data->tqueue.data = _data;\
+ }
+#endif
+
+#endif
static void receive_char(struct r3964_info *pInfo, const unsigned char c);
static void receive_error(struct r3964_info *pInfo, const char flag);
static void on_timeout(unsigned long priv);
-static int enable_signals(struct r3964_info *pInfo, pid_t pid, int arg);
-static int read_telegram(struct r3964_info *pInfo, pid_t pid, unsigned char __user *buf);
+static int enable_signals(struct r3964_info *pInfo, struct pid *pid, int arg);
+static int read_telegram(struct r3964_info *pInfo, struct pid *pid, unsigned char __user *buf);
static void add_msg(struct r3964_client_info *pClient, int msg_id, int arg,
int error_code, struct r3964_block_header *pBlock);
static struct r3964_message* remove_msg(struct r3964_info *pInfo,
const unsigned char * buf, size_t nr);
static int r3964_ioctl(struct tty_struct * tty, struct file * file,
unsigned int cmd, unsigned long arg);
-static void r3964_set_termios(struct tty_struct *tty, struct termios * old);
+static void r3964_set_termios(struct tty_struct *tty, struct ktermios * old);
static unsigned int r3964_poll(struct tty_struct * tty, struct file * file,
struct poll_table_struct *wait);
static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp,
}
static struct r3964_client_info *findClient(
- struct r3964_info *pInfo, pid_t pid)
+ struct r3964_info *pInfo, struct pid *pid)
{
struct r3964_client_info *pClient;
return NULL;
}
-static int enable_signals(struct r3964_info *pInfo, pid_t pid, int arg)
+static int enable_signals(struct r3964_info *pInfo, struct pid *pid, int arg)
{
struct r3964_client_info *pClient;
struct r3964_client_info **ppClient;
if(pClient->pid == pid)
{
- TRACE_PS("removing client %d from client list", pid);
+ TRACE_PS("removing client %d from client list", pid_nr(pid));
*ppClient = pClient->next;
while(pClient->msg_count)
{
TRACE_M("enable_signals - msg kfree %p",pMsg);
}
}
+ put_pid(pClient->pid);
kfree(pClient);
TRACE_M("enable_signals - kfree %p",pClient);
return 0;
if(pClient==NULL)
return -ENOMEM;
- TRACE_PS("add client %d to client list", pid);
+ TRACE_PS("add client %d to client list", pid_nr(pid));
spin_lock_init(&pClient->lock);
pClient->sig_flags=arg;
- pClient->pid = pid;
+ pClient->pid = get_pid(pid);
pClient->next=pInfo->firstClient;
pClient->first_msg = NULL;
pClient->last_msg = NULL;
return 0;
}
-static int read_telegram(struct r3964_info *pInfo, pid_t pid, unsigned char __user *buf)
+static int read_telegram(struct r3964_info *pInfo, struct pid *pid, unsigned char __user *buf)
{
struct r3964_client_info *pClient;
struct r3964_block_header *block;
/* Send SIGIO signal to client process: */
if(pClient->sig_flags & R3964_USE_SIGIO)
{
- kill_proc(pClient->pid, SIGIO, 1);
+ kill_pid(pClient->pid, SIGIO, 1);
}
}
{
struct r3964_block_header *block;
- TRACE_PS("remove_client_block PID %d", pClient->pid);
+ TRACE_PS("remove_client_block PID %d", pid_nr(pClient->pid));
block=pClient->next_block_to_read;
if(block)
TRACE_M("r3964_close - msg kfree %p",pMsg);
}
}
+ put_pid(pClient->pid);
kfree(pClient);
TRACE_M("r3964_close - client kfree %p",pClient);
pClient=pNext;
struct r3964_client_message theMsg;
DECLARE_WAITQUEUE (wait, current);
- int pid = current->pid;
int count;
TRACE_L("read()");
- pClient=findClient(pInfo, pid);
+ pClient=findClient(pInfo, task_pid(current));
if(pClient)
{
pMsg = remove_msg(pInfo, pClient);
struct r3964_block_header *pHeader;
struct r3964_client_info *pClient;
unsigned char *new_data;
- int pid;
TRACE_L("write request, %d characters", count);
/*
pHeader->locks = 0;
pHeader->owner = NULL;
- pid=current->pid;
-
- pClient=findClient(pInfo, pid);
+ pClient=findClient(pInfo, task_pid(current));
if(pClient)
{
pHeader->owner = pClient;
switch(cmd)
{
case R3964_ENABLE_SIGNALS:
- return enable_signals(pInfo, current->pid, arg);
+ return enable_signals(pInfo, task_pid(current), arg);
case R3964_SETPRIORITY:
if(arg<R3964_MASTER || arg>R3964_SLAVE)
return -EINVAL;
pInfo->flags &= ~R3964_BCC;
return 0;
case R3964_READ_TELEGRAM:
- return read_telegram(pInfo, current->pid, (unsigned char __user *)arg);
+ return read_telegram(pInfo, task_pid(current), (unsigned char __user *)arg);
default:
return -ENOIOCTLCMD;
}
}
-static void r3964_set_termios(struct tty_struct *tty, struct termios * old)
+static void r3964_set_termios(struct tty_struct *tty, struct ktermios * old)
{
TRACE_L("set_termios");
}
struct poll_table_struct *wait)
{
struct r3964_info *pInfo=(struct r3964_info*)tty->disc_data;
- int pid=current->pid;
struct r3964_client_info *pClient;
struct r3964_message *pMsg=NULL;
unsigned long flags;
TRACE_L("POLL");
- pClient=findClient(pInfo,pid);
+ pClient=findClient(pInfo, task_pid(current));
if(pClient)
{
poll_wait(file, &pInfo->read_wait, wait);
* when the ldisc is closed.
*/
-static void n_tty_set_termios(struct tty_struct *tty, struct termios * old)
+static void n_tty_set_termios(struct tty_struct *tty, struct ktermios * old)
{
if (!tty)
return;
n = min(*nr, n);
spin_unlock_irqrestore(&tty->read_lock, flags);
if (n) {
- mb();
retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n);
n -= retval;
spin_lock_irqsave(&tty->read_lock, flags);
ssize_t nsc_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
- unsigned m = iminor(file->f_dentry->d_inode);
+ unsigned m = iminor(file->f_path.dentry->d_inode);
struct nsc_gpio_ops *amp = file->private_data;
struct device *dev = amp->dev;
size_t i;
ssize_t nsc_gpio_read(struct file *file, char __user * buf,
size_t len, loff_t * ppos)
{
- unsigned m = iminor(file->f_dentry->d_inode);
+ unsigned m = iminor(file->f_path.dentry->d_inode);
int value;
struct nsc_gpio_ops *amp = file->private_data;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("mgslpc_attach\n");
- info = (MGSLPC_INFO *)kmalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
+ info = kmalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
if (!info) {
printk("Error can't allocate device instance data\n");
return -ENOMEM;
* tty pointer to tty structure
* termios pointer to buffer to hold returned old termios
*/
-static void mgslpc_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
static ssize_t pp_read (struct file * file, char __user * buf, size_t count,
loff_t * ppos)
{
- unsigned int minor = iminor(file->f_dentry->d_inode);
+ unsigned int minor = iminor(file->f_path.dentry->d_inode);
struct pp_struct *pp = file->private_data;
char * kbuffer;
ssize_t bytes_read = 0;
static ssize_t pp_write (struct file * file, const char __user * buf,
size_t count, loff_t * ppos)
{
- unsigned int minor = iminor(file->f_dentry->d_inode);
+ unsigned int minor = iminor(file->f_path.dentry->d_inode);
struct pp_struct *pp = file->private_data;
char * kbuffer;
ssize_t bytes_written = 0;
return retval;
}
-static void pty_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void pty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
tty->termios->c_cflag &= ~(CSIZE | PARENB);
tty->termios->c_cflag |= (CS8 | CREAD);
pty_driver->init_termios.c_oflag = 0;
pty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pty_driver->init_termios.c_lflag = 0;
+ pty_driver->init_termios.c_ispeed = 38400;
+ pty_driver->init_termios.c_ospeed = 38400;
pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
pty_driver->other = pty_slave_driver;
tty_set_operations(pty_driver, &pty_ops);
pty_slave_driver->subtype = PTY_TYPE_SLAVE;
pty_slave_driver->init_termios = tty_std_termios;
pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
+ pty_slave_driver->init_termios.c_ispeed = 38400;
+ pty_slave_driver->init_termios.c_ospeed = 38400;
pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
TTY_DRIVER_REAL_RAW;
pty_slave_driver->other = pty_driver;
ptm_driver->init_termios.c_oflag = 0;
ptm_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
ptm_driver->init_termios.c_lflag = 0;
+ ptm_driver->init_termios.c_ispeed = 38400;
+ ptm_driver->init_termios.c_ospeed = 38400;
ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
ptm_driver->other = pts_driver;
pts_driver->subtype = PTY_TYPE_SLAVE;
pts_driver->init_termios = tty_std_termios;
pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
+ pts_driver->init_termios.c_ispeed = 38400;
+ pts_driver->init_termios.c_ospeed = 38400;
pts_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
pts_driver->other = ptm_driver;
if (p == buffer) {
return (ssize_t)ret;
} else {
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
inode->i_mtime = current_fs_time(inode->i_sb);
mark_inode_dirty(inode);
return (ssize_t)(p - buffer);
static int uuid_strategy(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
unsigned char tmp_uuid[16], *uuid;
unsigned int len;
filp->f_flags |= O_DIRECT;
filp->f_mapping = bdev->bd_inode->i_mapping;
if (++raw_devices[minor].inuse == 1)
- filp->f_dentry->d_inode->i_mapping =
+ filp->f_path.dentry->d_inode->i_mapping =
bdev->bd_inode->i_mapping;
filp->private_data = bdev;
mutex_unlock(&raw_mutex);
{
struct CmdBlk *CmdBlkP;
- CmdBlkP = (struct CmdBlk *)kmalloc(sizeof(struct CmdBlk), GFP_ATOMIC);
+ CmdBlkP = kmalloc(sizeof(struct CmdBlk), GFP_ATOMIC);
if (CmdBlkP)
memset(CmdBlkP, 0, sizeof(struct CmdBlk));
return CmdBlkP;
wake_up_interruptible(&port->open_wait);
}
-static void rc_set_termios(struct tty_struct * tty, struct termios * old_termios)
+static void rc_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
{
struct riscom_port *port = (struct riscom_port *)tty->driver_data;
unsigned long flags;
riscom_driver->init_termios = tty_std_termios;
riscom_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ riscom_driver->init_termios.c_ispeed = 9600;
+ riscom_driver->init_termios.c_ospeed = 9600;
riscom_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(riscom_driver, &riscom_ops);
if ((error = tty_register_driver(riscom_driver))) {
* user mode into the driver (exception handler). *info CD manipulation is spinlock protected.
*/
static void configure_r_port(struct r_port *info,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
unsigned cflag;
unsigned long flags;
/*
* Info->count is now 1; so it's safe to sleep now.
*/
- info->session = current->signal->session;
+ info->session = process_session(current);
info->pgrp = process_group(current);
if ((info->flags & ROCKET_INITIALIZED) == 0) {
}
static void rp_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct r_port *info = (struct r_port *) tty->driver_data;
CHANNEL_t *cp;
int count = 0;
/* Work through the PCI device list, pulling out ours */
- while ((dev = pci_find_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
+ while ((dev = pci_get_device(PCI_VENDOR_ID_RP, PCI_ANY_ID, dev))) {
if (register_PCI(count + boards_found, dev))
count++;
}
rocket_driver->init_termios = tty_std_termios;
rocket_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ rocket_driver->init_termios.c_ispeed = 9600;
+ rocket_driver->init_termios.c_ospeed = 9600;
#ifdef ROCKET_SOFT_FLOW
rocket_driver->flags |= TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
#endif
#define hpet_set_rtc_irq_bit(arg) 0
#define hpet_rtc_timer_init() do { } while (0)
#define hpet_rtc_dropped_irq() 0
-static inline irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) {return 0;}
+static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) {return 0;}
#else
extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
#endif
}
#endif
+#ifdef CONFIG_PROC_FS
static int rtc_proc_open(struct inode *inode, struct file *file);
+#endif
/*
* Bits in rtc_status. (6 bits of room for future expansion)
.fops = &rtc_fops,
};
+#ifdef CONFIG_PROC_FS
static const struct file_operations rtc_proc_fops = {
.owner = THIS_MODULE,
.open = rtc_proc_open,
.llseek = seq_lseek,
.release = single_release,
};
-
-#if defined(RTC_IRQ) && !defined(__sparc__)
-static irq_handler_t rtc_int_handler_ptr;
#endif
static int __init rtc_init(void)
{
+#ifdef CONFIG_PROC_FS
struct proc_dir_entry *ent;
+#endif
#if defined(__alpha__) || defined(__mips__)
unsigned int year, ctrl;
char *guess = NULL;
struct sparc_isa_bridge *isa_br;
struct sparc_isa_device *isa_dev;
#endif
-#endif
-#ifndef __sparc__
+#else
void *r;
+#ifdef RTC_IRQ
+ irq_handler_t rtc_int_handler_ptr;
+#endif
#endif
#ifdef __sparc__
}
}
#endif
+ rtc_has_irq = 0;
printk(KERN_ERR "rtc_init: no PC rtc found\n");
return -EIO;
* PCI Slot 2 INTA# (and some INTx# in Slot 1).
*/
if (request_irq(rtc_irq, rtc_interrupt, IRQF_SHARED, "rtc", (void *)&rtc_port)) {
+ rtc_has_irq = 0;
printk(KERN_ERR "rtc: cannot register IRQ %d\n", rtc_irq);
return -EIO;
}
else
r = request_mem_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
if (!r) {
+#ifdef RTC_IRQ
+ rtc_has_irq = 0;
+#endif
printk(KERN_ERR "rtc: I/O resource %lx is not free.\n",
(long)(RTC_PORT(0)));
return -EIO;
if(request_irq(RTC_IRQ, rtc_int_handler_ptr, IRQF_DISABLED, "rtc", NULL)) {
/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
+ rtc_has_irq = 0;
printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
if (RTC_IOMAPPED)
release_region(RTC_PORT(0), RTC_IO_EXTENT);
if (misc_register(&rtc_dev)) {
#ifdef RTC_IRQ
free_irq(RTC_IRQ, NULL);
+ rtc_has_irq = 0;
#endif
release_region(RTC_PORT(0), RTC_IO_EXTENT);
return -ENODEV;
}
+#ifdef CONFIG_PROC_FS
ent = create_proc_entry("driver/rtc", 0, NULL);
- if (!ent) {
-#ifdef RTC_IRQ
- free_irq(RTC_IRQ, NULL);
+ if (ent)
+ ent->proc_fops = &rtc_proc_fops;
+ else
+ printk(KERN_WARNING "rtc: Failed to register with procfs.\n");
#endif
- release_region(RTC_PORT(0), RTC_IO_EXTENT);
- misc_deregister(&rtc_dev);
- return -ENOMEM;
- }
- ent->proc_fops = &rtc_proc_fops;
#if defined(__alpha__) || defined(__mips__)
rtc_freq = HZ;
}
#endif
+#ifdef CONFIG_PROC_FS
/*
* Info exported via "/proc/driver/rtc".
*/
{
return single_open(file, rtc_proc_show, NULL);
}
+#endif
void rtc_get_rtc_time(struct rtc_time *rtc_tm)
{
a2232_driver->init_termios = tty_std_termios;
a2232_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ a2232_driver->init_termios.c_ispeed = 9600;
+ a2232_driver->init_termios.c_ospeed = 9600;
a2232_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(a2232_driver, &a2232_ops);
if ((error = tty_register_driver(a2232_driver))) {
static void
-cy_set_termios(struct tty_struct *tty, struct termios * old_termios)
+cy_set_termios(struct tty_struct *tty, struct ktermios * old_termios)
{
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
}
if (ret > 0) {
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
inode->i_atime = current_fs_time(inode->i_sb);
}
}
-static void sx_set_termios(struct tty_struct * tty, struct termios * old_termios)
+static void sx_set_termios(struct tty_struct * tty, struct ktermios * old_termios)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
specialix_driver->init_termios = tty_std_termios;
specialix_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ specialix_driver->init_termios.c_ispeed = 9600;
+ specialix_driver->init_termios.c_ospeed = 9600;
specialix_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(specialix_driver, &sx_ops);
i++;
continue;
}
- pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX,
+ pdev = pci_get_device (PCI_VENDOR_ID_SPECIALIX,
PCI_DEVICE_ID_SPECIALIX_IO8,
pdev);
if (!pdev) break;
if (!sx_probe(&sx_board[i]))
found ++;
}
+ /* May exit pci_get sequence early with lots of boards */
+ if (pdev != NULL)
+ pci_dev_put(pdev);
}
#endif
#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/ctype.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#ifdef CONFIG_PCI
#include <linux/pci.h>
-#endif
/*****************************************************************************/
#define BRD_ECH64PCI 27
#define BRD_EASYIOPCI 28
-/*
- * Define a configuration structure to hold the board configuration.
- * Need to set this up in the code (for now) with the boards that are
- * to be configured into the system. This is what needs to be modified
- * when adding/removing/modifying boards. Each line entry in the
- * stl_brdconf[] array is a board. Each line contains io/irq/memory
- * ranges for that board (as well as what type of board it is).
- * Some examples:
- * { BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },
- * This line would configure an EasyIO board (4 or 8, no difference),
- * at io address 2a0 and irq 10.
- * Another example:
- * { BRD_ECH, 0x2a8, 0x280, 0, 12, 0 },
- * This line will configure an EasyConnection 8/32 board at primary io
- * address 2a8, secondary io address 280 and irq 12.
- * Enter as many lines into this array as you want (only the first 4
- * will actually be used!). Any combination of EasyIO and EasyConnection
- * boards can be specified. EasyConnection 8/32 boards can share their
- * secondary io addresses between each other.
- *
- * NOTE: there is no need to put any entries in this table for PCI
- * boards. They will be found automatically by the driver - provided
- * PCI BIOS32 support is compiled into the kernel.
- */
-
-typedef struct {
- int brdtype;
+struct stlconf {
+ unsigned int brdtype;
int ioaddr1;
int ioaddr2;
unsigned long memaddr;
int irq;
int irqtype;
-} stlconf_t;
-
-static stlconf_t stl_brdconf[] = {
- /*{ BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },*/
};
-static int stl_nrbrds = ARRAY_SIZE(stl_brdconf);
+static unsigned int stl_nrbrds;
/*****************************************************************************/
* with this termios initially. Basically all it defines is a raw port
* at 9600, 8 data bits, 1 stop bit.
*/
-static struct termios stl_deftermios = {
+static struct ktermios stl_deftermios = {
.c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
.c_cc = INIT_C_CC,
+ .c_ispeed = 9600,
+ .c_ospeed = 9600,
};
/*
- * Define global stats structures. Not used often, and can be
- * re-used for each stats call.
- */
-static comstats_t stl_comstats;
-static combrd_t stl_brdstats;
-static stlbrd_t stl_dummybrd;
-static stlport_t stl_dummyport;
-
-/*
* Define global place to put buffer overflow characters.
*/
static char stl_unwanted[SC26198_RXFIFOSIZE];
/*****************************************************************************/
-static stlbrd_t *stl_brds[STL_MAXBRDS];
+static DEFINE_MUTEX(stl_brdslock);
+static struct stlbrd *stl_brds[STL_MAXBRDS];
/*
* Per board state flags. Used with the state field of the board struct.
* Not really much here!
*/
#define BRD_FOUND 0x1
+#define STL_PROBED 0x2
+
/*
* Define the port structure istate flags. These set of flags are
* referencing boards when printing trace and stuff.
*/
static char *stl_brdnames[] = {
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
"EasyIO",
"EC8/32-AT",
"EC8/32-MC",
- (char *) NULL,
- (char *) NULL,
- (char *) NULL,
+ NULL,
+ NULL,
+ NULL,
"EC8/32-PCI",
"EC8/64-PCI",
"EasyIO-PCI",
* load line. These allow for easy board definitions, and easy
* modification of the io, memory and irq resoucres.
*/
-static int stl_nargs = 0;
+static unsigned int stl_nargs;
static char *board0[4];
static char *board1[4];
static char *board2[4];
* parse any module arguments.
*/
-typedef struct stlbrdtype {
+static struct {
char *name;
int type;
-} stlbrdtype_t;
-
-static stlbrdtype_t stl_brdstr[] = {
+} stl_brdstr[] = {
{ "easyio", BRD_EASYIO },
{ "eio", BRD_EASYIO },
{ "20", BRD_EASYIO },
/*
* Define the module agruments.
*/
-MODULE_AUTHOR("Greg Ungerer");
-MODULE_DESCRIPTION("Stallion Multiport Serial Driver");
-MODULE_LICENSE("GPL");
module_param_array(board0, charp, &stl_nargs, 0);
MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]");
/*****************************************************************************/
-#ifdef CONFIG_PCI
-
/*
* Define the Stallion PCI vendor and device IDs.
*/
/*
* Define structure to hold all Stallion PCI boards.
*/
-typedef struct stlpcibrd {
- unsigned short vendid;
- unsigned short devid;
- int brdtype;
-} stlpcibrd_t;
-
-static stlpcibrd_t stl_pcibrds[] = {
- { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864, BRD_ECH64PCI },
- { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI, BRD_EASYIOPCI },
- { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832, BRD_ECHPCI },
- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, BRD_ECHPCI },
-};
-static int stl_nrpcibrds = ARRAY_SIZE(stl_pcibrds);
-
-#endif
+static struct pci_device_id stl_pcibrds[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864),
+ .driver_data = BRD_ECH64PCI },
+ { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI),
+ .driver_data = BRD_EASYIOPCI },
+ { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832),
+ .driver_data = BRD_ECHPCI },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410),
+ .driver_data = BRD_ECHPCI },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, stl_pcibrds);
/*****************************************************************************/
9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
};
-/*
- * Define some handy local macros...
- */
-#undef MIN
-#define MIN(a,b) (((a) <= (b)) ? (a) : (b))
-
-#undef TOLOWER
-#define TOLOWER(x) ((((x) >= 'A') && ((x) <= 'Z')) ? ((x) + 0x20) : (x))
-
/*****************************************************************************/
/*
* Declare all those functions in this driver!
*/
-static void stl_argbrds(void);
-static int stl_parsebrd(stlconf_t *confp, char **argp);
-
-static unsigned long stl_atol(char *str);
-
-static int stl_init(void);
-static int stl_open(struct tty_struct *tty, struct file *filp);
-static void stl_close(struct tty_struct *tty, struct file *filp);
-static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count);
-static void stl_putchar(struct tty_struct *tty, unsigned char ch);
-static void stl_flushchars(struct tty_struct *tty);
-static int stl_writeroom(struct tty_struct *tty);
-static int stl_charsinbuffer(struct tty_struct *tty);
-static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
-static void stl_settermios(struct tty_struct *tty, struct termios *old);
-static void stl_throttle(struct tty_struct *tty);
-static void stl_unthrottle(struct tty_struct *tty);
-static void stl_stop(struct tty_struct *tty);
-static void stl_start(struct tty_struct *tty);
-static void stl_flushbuffer(struct tty_struct *tty);
-static void stl_breakctl(struct tty_struct *tty, int state);
-static void stl_waituntilsent(struct tty_struct *tty, int timeout);
-static void stl_sendxchar(struct tty_struct *tty, char ch);
-static void stl_hangup(struct tty_struct *tty);
static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg);
-static int stl_portinfo(stlport_t *portp, int portnr, char *pos);
-static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data);
-
-static int stl_brdinit(stlbrd_t *brdp);
-static int stl_initports(stlbrd_t *brdp, stlpanel_t *panelp);
-static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp);
-static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp);
-static int stl_getbrdstats(combrd_t __user *bp);
-static int stl_getportstats(stlport_t *portp, comstats_t __user *cp);
-static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp);
-static int stl_getportstruct(stlport_t __user *arg);
-static int stl_getbrdstruct(stlbrd_t __user *arg);
-static int stl_waitcarrier(stlport_t *portp, struct file *filp);
-static int stl_eiointr(stlbrd_t *brdp);
-static int stl_echatintr(stlbrd_t *brdp);
-static int stl_echmcaintr(stlbrd_t *brdp);
-static int stl_echpciintr(stlbrd_t *brdp);
-static int stl_echpci64intr(stlbrd_t *brdp);
-static void stl_offintr(struct work_struct *);
-static stlbrd_t *stl_allocbrd(void);
-static stlport_t *stl_getport(int brdnr, int panelnr, int portnr);
-
-static inline int stl_initbrds(void);
-static inline int stl_initeio(stlbrd_t *brdp);
-static inline int stl_initech(stlbrd_t *brdp);
-static inline int stl_getbrdnr(void);
-
-#ifdef CONFIG_PCI
-static inline int stl_findpcibrds(void);
-static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp);
-#endif
+static int stl_brdinit(struct stlbrd *brdp);
+static int stl_getportstats(struct stlport *portp, comstats_t __user *cp);
+static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp);
+static int stl_waitcarrier(struct stlport *portp, struct file *filp);
/*
* CD1400 uart specific handling functions.
*/
-static void stl_cd1400setreg(stlport_t *portp, int regnr, int value);
-static int stl_cd1400getreg(stlport_t *portp, int regnr);
-static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value);
-static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp);
-static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp);
-static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp);
-static int stl_cd1400getsignals(stlport_t *portp);
-static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts);
-static void stl_cd1400ccrwait(stlport_t *portp);
-static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx);
-static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx);
-static void stl_cd1400disableintrs(stlport_t *portp);
-static void stl_cd1400sendbreak(stlport_t *portp, int len);
-static void stl_cd1400flowctrl(stlport_t *portp, int state);
-static void stl_cd1400sendflow(stlport_t *portp, int state);
-static void stl_cd1400flush(stlport_t *portp);
-static int stl_cd1400datastate(stlport_t *portp);
-static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase);
-static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase);
-static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr);
-static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr);
-static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr);
-
-static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr);
+static void stl_cd1400setreg(struct stlport *portp, int regnr, int value);
+static int stl_cd1400getreg(struct stlport *portp, int regnr);
+static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value);
+static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp);
+static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
+static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp);
+static int stl_cd1400getsignals(struct stlport *portp);
+static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts);
+static void stl_cd1400ccrwait(struct stlport *portp);
+static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx);
+static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx);
+static void stl_cd1400disableintrs(struct stlport *portp);
+static void stl_cd1400sendbreak(struct stlport *portp, int len);
+static void stl_cd1400flowctrl(struct stlport *portp, int state);
+static void stl_cd1400sendflow(struct stlport *portp, int state);
+static void stl_cd1400flush(struct stlport *portp);
+static int stl_cd1400datastate(struct stlport *portp);
+static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase);
+static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase);
+static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr);
+static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr);
+static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr);
+
+static inline int stl_cd1400breakisr(struct stlport *portp, int ioaddr);
/*
* SC26198 uart specific handling functions.
*/
-static void stl_sc26198setreg(stlport_t *portp, int regnr, int value);
-static int stl_sc26198getreg(stlport_t *portp, int regnr);
-static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value);
-static int stl_sc26198getglobreg(stlport_t *portp, int regnr);
-static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp);
-static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp);
-static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp);
-static int stl_sc26198getsignals(stlport_t *portp);
-static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts);
-static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx);
-static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx);
-static void stl_sc26198disableintrs(stlport_t *portp);
-static void stl_sc26198sendbreak(stlport_t *portp, int len);
-static void stl_sc26198flowctrl(stlport_t *portp, int state);
-static void stl_sc26198sendflow(stlport_t *portp, int state);
-static void stl_sc26198flush(stlport_t *portp);
-static int stl_sc26198datastate(stlport_t *portp);
-static void stl_sc26198wait(stlport_t *portp);
-static void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty);
-static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase);
-static void stl_sc26198txisr(stlport_t *port);
-static void stl_sc26198rxisr(stlport_t *port, unsigned int iack);
-static void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch);
-static void stl_sc26198rxbadchars(stlport_t *portp);
-static void stl_sc26198otherisr(stlport_t *port, unsigned int iack);
+static void stl_sc26198setreg(struct stlport *portp, int regnr, int value);
+static int stl_sc26198getreg(struct stlport *portp, int regnr);
+static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value);
+static int stl_sc26198getglobreg(struct stlport *portp, int regnr);
+static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp);
+static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
+static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp);
+static int stl_sc26198getsignals(struct stlport *portp);
+static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts);
+static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx);
+static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx);
+static void stl_sc26198disableintrs(struct stlport *portp);
+static void stl_sc26198sendbreak(struct stlport *portp, int len);
+static void stl_sc26198flowctrl(struct stlport *portp, int state);
+static void stl_sc26198sendflow(struct stlport *portp, int state);
+static void stl_sc26198flush(struct stlport *portp);
+static int stl_sc26198datastate(struct stlport *portp);
+static void stl_sc26198wait(struct stlport *portp);
+static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty);
+static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase);
+static void stl_sc26198txisr(struct stlport *port);
+static void stl_sc26198rxisr(struct stlport *port, unsigned int iack);
+static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch);
+static void stl_sc26198rxbadchars(struct stlport *portp);
+static void stl_sc26198otherisr(struct stlport *port, unsigned int iack);
/*****************************************************************************/
* Generic UART support structure.
*/
typedef struct uart {
- int (*panelinit)(stlbrd_t *brdp, stlpanel_t *panelp);
- void (*portinit)(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp);
- void (*setport)(stlport_t *portp, struct termios *tiosp);
- int (*getsignals)(stlport_t *portp);
- void (*setsignals)(stlport_t *portp, int dtr, int rts);
- void (*enablerxtx)(stlport_t *portp, int rx, int tx);
- void (*startrxtx)(stlport_t *portp, int rx, int tx);
- void (*disableintrs)(stlport_t *portp);
- void (*sendbreak)(stlport_t *portp, int len);
- void (*flowctrl)(stlport_t *portp, int state);
- void (*sendflow)(stlport_t *portp, int state);
- void (*flush)(stlport_t *portp);
- int (*datastate)(stlport_t *portp);
- void (*intr)(stlpanel_t *panelp, unsigned int iobase);
+ int (*panelinit)(struct stlbrd *brdp, struct stlpanel *panelp);
+ void (*portinit)(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
+ void (*setport)(struct stlport *portp, struct ktermios *tiosp);
+ int (*getsignals)(struct stlport *portp);
+ void (*setsignals)(struct stlport *portp, int dtr, int rts);
+ void (*enablerxtx)(struct stlport *portp, int rx, int tx);
+ void (*startrxtx)(struct stlport *portp, int rx, int tx);
+ void (*disableintrs)(struct stlport *portp);
+ void (*sendbreak)(struct stlport *portp, int len);
+ void (*flowctrl)(struct stlport *portp, int state);
+ void (*sendflow)(struct stlport *portp, int state);
+ void (*flush)(struct stlport *portp);
+ int (*datastate)(struct stlport *portp);
+ void (*intr)(struct stlpanel *panelp, unsigned int iobase);
} uart_t;
/*
.ioctl = stl_memioctl,
};
-/*****************************************************************************/
-
static struct class *stallion_class;
/*
- * Loadable module initialization stuff.
- */
-
-static int __init stallion_module_init(void)
-{
- stl_init();
- return 0;
-}
-
-/*****************************************************************************/
-
-static void __exit stallion_module_exit(void)
-{
- stlbrd_t *brdp;
- stlpanel_t *panelp;
- stlport_t *portp;
- int i, j, k;
-
-#ifdef DEBUG
- printk("cleanup_module()\n");
-#endif
-
- printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle,
- stl_drvversion);
-
-/*
- * Free up all allocated resources used by the ports. This includes
- * memory and interrupts. As part of this process we will also do
- * a hangup on every open port - to try to flush out any processes
- * hanging onto ports.
- */
- i = tty_unregister_driver(stl_serial);
- put_tty_driver(stl_serial);
- if (i) {
- printk("STALLION: failed to un-register tty driver, "
- "errno=%d\n", -i);
- return;
- }
- for (i = 0; i < 4; i++)
- class_device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
- if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem")))
- printk("STALLION: failed to un-register serial memory device, "
- "errno=%d\n", -i);
- class_destroy(stallion_class);
-
- for (i = 0; (i < stl_nrbrds); i++) {
- if ((brdp = stl_brds[i]) == (stlbrd_t *) NULL)
- continue;
-
- free_irq(brdp->irq, brdp);
-
- for (j = 0; (j < STL_MAXPANELS); j++) {
- panelp = brdp->panels[j];
- if (panelp == (stlpanel_t *) NULL)
- continue;
- for (k = 0; (k < STL_PORTSPERPANEL); k++) {
- portp = panelp->ports[k];
- if (portp == (stlport_t *) NULL)
- continue;
- if (portp->tty != (struct tty_struct *) NULL)
- stl_hangup(portp->tty);
- kfree(portp->tx.buf);
- kfree(portp);
- }
- kfree(panelp);
- }
-
- release_region(brdp->ioaddr1, brdp->iosize1);
- if (brdp->iosize2 > 0)
- release_region(brdp->ioaddr2, brdp->iosize2);
-
- kfree(brdp);
- stl_brds[i] = (stlbrd_t *) NULL;
- }
-}
-
-module_init(stallion_module_init);
-module_exit(stallion_module_exit);
-
-/*****************************************************************************/
-
-/*
* Check for any arguments passed in on the module load command line.
*/
-static void stl_argbrds(void)
-{
- stlconf_t conf;
- stlbrd_t *brdp;
- int i;
-
-#ifdef DEBUG
- printk("stl_argbrds()\n");
-#endif
-
- for (i = stl_nrbrds; (i < stl_nargs); i++) {
- memset(&conf, 0, sizeof(conf));
- if (stl_parsebrd(&conf, stl_brdsp[i]) == 0)
- continue;
- if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL)
- continue;
- stl_nrbrds = i + 1;
- brdp->brdnr = i;
- brdp->brdtype = conf.brdtype;
- brdp->ioaddr1 = conf.ioaddr1;
- brdp->ioaddr2 = conf.ioaddr2;
- brdp->irq = conf.irq;
- brdp->irqtype = conf.irqtype;
- stl_brdinit(brdp);
- }
-}
-
-/*****************************************************************************/
-
-/*
- * Convert an ascii string number into an unsigned long.
- */
-
-static unsigned long stl_atol(char *str)
-{
- unsigned long val;
- int base, c;
- char *sp;
-
- val = 0;
- sp = str;
- if ((*sp == '0') && (*(sp+1) == 'x')) {
- base = 16;
- sp += 2;
- } else if (*sp == '0') {
- base = 8;
- sp++;
- } else {
- base = 10;
- }
-
- for (; (*sp != 0); sp++) {
- c = (*sp > '9') ? (TOLOWER(*sp) - 'a' + 10) : (*sp - '0');
- if ((c < 0) || (c >= base)) {
- printk("STALLION: invalid argument %s\n", str);
- val = 0;
- break;
- }
- val = (val * base) + c;
- }
- return val;
-}
-
/*****************************************************************************/
/*
* Parse the supplied argument string, into the board conf struct.
*/
-static int stl_parsebrd(stlconf_t *confp, char **argp)
+static int __init stl_parsebrd(struct stlconf *confp, char **argp)
{
char *sp;
- int i;
+ unsigned int i;
-#ifdef DEBUG
- printk("stl_parsebrd(confp=%x,argp=%x)\n", (int) confp, (int) argp);
-#endif
+ pr_debug("stl_parsebrd(confp=%p,argp=%p)\n", confp, argp);
- if ((argp[0] == (char *) NULL) || (*argp[0] == 0))
+ if ((argp[0] == NULL) || (*argp[0] == 0))
return 0;
- for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
- *sp = TOLOWER(*sp);
+ for (sp = argp[0], i = 0; (*sp != 0) && (i < 25); sp++, i++)
+ *sp = tolower(*sp);
- for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++) {
+ for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++)
if (strcmp(stl_brdstr[i].name, argp[0]) == 0)
break;
- }
+
if (i == ARRAY_SIZE(stl_brdstr)) {
printk("STALLION: unknown board name, %s?\n", argp[0]);
return 0;
confp->brdtype = stl_brdstr[i].type;
i = 1;
- if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
- confp->ioaddr1 = stl_atol(argp[i]);
+ if ((argp[i] != NULL) && (*argp[i] != 0))
+ confp->ioaddr1 = simple_strtoul(argp[i], NULL, 0);
i++;
if (confp->brdtype == BRD_ECH) {
- if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
- confp->ioaddr2 = stl_atol(argp[i]);
+ if ((argp[i] != NULL) && (*argp[i] != 0))
+ confp->ioaddr2 = simple_strtoul(argp[i], NULL, 0);
i++;
}
- if ((argp[i] != (char *) NULL) && (*argp[i] != 0))
- confp->irq = stl_atol(argp[i]);
+ if ((argp[i] != NULL) && (*argp[i] != 0))
+ confp->irq = simple_strtoul(argp[i], NULL, 0);
return 1;
}
* Allocate a new board structure. Fill out the basic info in it.
*/
-static stlbrd_t *stl_allocbrd(void)
+static struct stlbrd *stl_allocbrd(void)
{
- stlbrd_t *brdp;
+ struct stlbrd *brdp;
- brdp = kzalloc(sizeof(stlbrd_t), GFP_KERNEL);
+ brdp = kzalloc(sizeof(struct stlbrd), GFP_KERNEL);
if (!brdp) {
printk("STALLION: failed to allocate memory (size=%Zd)\n",
- sizeof(stlbrd_t));
+ sizeof(struct stlbrd));
return NULL;
}
static int stl_open(struct tty_struct *tty, struct file *filp)
{
- stlport_t *portp;
- stlbrd_t *brdp;
- unsigned int minordev;
- int brdnr, panelnr, portnr, rc;
-
-#ifdef DEBUG
- printk("stl_open(tty=%x,filp=%x): device=%s\n", (int) tty,
- (int) filp, tty->name);
-#endif
+ struct stlport *portp;
+ struct stlbrd *brdp;
+ unsigned int minordev, brdnr, panelnr;
+ int portnr, rc;
+
+ pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name);
minordev = tty->index;
brdnr = MINOR2BRD(minordev);
if (brdnr >= stl_nrbrds)
return -ENODEV;
brdp = stl_brds[brdnr];
- if (brdp == (stlbrd_t *) NULL)
+ if (brdp == NULL)
return -ENODEV;
minordev = MINOR2PORT(minordev);
- for (portnr = -1, panelnr = 0; (panelnr < STL_MAXPANELS); panelnr++) {
- if (brdp->panels[panelnr] == (stlpanel_t *) NULL)
+ for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) {
+ if (brdp->panels[panelnr] == NULL)
break;
if (minordev < brdp->panels[panelnr]->nrports) {
portnr = minordev;
return -ENODEV;
portp = brdp->panels[panelnr]->ports[portnr];
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return -ENODEV;
/*
* previous opens still in effect. If we are a normal serial device
* then also we might have to wait for carrier.
*/
- if (!(filp->f_flags & O_NONBLOCK)) {
+ if (!(filp->f_flags & O_NONBLOCK))
if ((rc = stl_waitcarrier(portp, filp)) != 0)
return rc;
- }
+
portp->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
* maybe because if we are clocal then we don't need to wait...
*/
-static int stl_waitcarrier(stlport_t *portp, struct file *filp)
+static int stl_waitcarrier(struct stlport *portp, struct file *filp)
{
unsigned long flags;
int rc, doclocal;
-#ifdef DEBUG
- printk("stl_waitcarrier(portp=%x,filp=%x)\n", (int) portp, (int) filp);
-#endif
+ pr_debug("stl_waitcarrier(portp=%p,filp=%p)\n", portp, filp);
rc = 0;
doclocal = 0;
break;
}
if (((portp->flags & ASYNC_CLOSING) == 0) &&
- (doclocal || (portp->sigs & TIOCM_CD))) {
+ (doclocal || (portp->sigs & TIOCM_CD)))
break;
- }
if (signal_pending(current)) {
rc = -ERESTARTSYS;
break;
/*****************************************************************************/
+static void stl_flushbuffer(struct tty_struct *tty)
+{
+ struct stlport *portp;
+
+ pr_debug("stl_flushbuffer(tty=%p)\n", tty);
+
+ if (tty == NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == NULL)
+ return;
+
+ stl_flush(portp);
+ tty_wakeup(tty);
+}
+
+/*****************************************************************************/
+
+static void stl_waituntilsent(struct tty_struct *tty, int timeout)
+{
+ struct stlport *portp;
+ unsigned long tend;
+
+ pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout);
+
+ if (tty == NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == NULL)
+ return;
+
+ if (timeout == 0)
+ timeout = HZ;
+ tend = jiffies + timeout;
+
+ while (stl_datastate(portp)) {
+ if (signal_pending(current))
+ break;
+ msleep_interruptible(20);
+ if (time_after_eq(jiffies, tend))
+ break;
+ }
+}
+
+/*****************************************************************************/
+
static void stl_close(struct tty_struct *tty, struct file *filp)
{
- stlport_t *portp;
+ struct stlport *portp;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_close(tty=%x,filp=%x)\n", (int) tty, (int) filp);
-#endif
+ pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp);
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
spin_lock_irqsave(&stallion_lock, flags);
stl_enablerxtx(portp, 0, 0);
stl_flushbuffer(tty);
portp->istate = 0;
- if (portp->tx.buf != (char *) NULL) {
+ if (portp->tx.buf != NULL) {
kfree(portp->tx.buf);
- portp->tx.buf = (char *) NULL;
- portp->tx.head = (char *) NULL;
- portp->tx.tail = (char *) NULL;
+ portp->tx.buf = NULL;
+ portp->tx.head = NULL;
+ portp->tx.tail = NULL;
}
set_bit(TTY_IO_ERROR, &tty->flags);
tty_ldisc_flush(tty);
tty->closing = 0;
- portp->tty = (struct tty_struct *) NULL;
+ portp->tty = NULL;
if (portp->openwaitcnt) {
if (portp->close_delay)
static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
- stlport_t *portp;
+ struct stlport *portp;
unsigned int len, stlen;
unsigned char *chbuf;
char *head, *tail;
-#ifdef DEBUG
- printk("stl_write(tty=%x,buf=%x,count=%d)\n",
- (int) tty, (int) buf, count);
-#endif
+ pr_debug("stl_write(tty=%p,buf=%p,count=%d)\n", tty, buf, count);
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return 0;
- if (portp->tx.buf == (char *) NULL)
+ if (portp->tx.buf == NULL)
return 0;
/*
stlen = len;
}
- len = MIN(len, count);
+ len = min(len, (unsigned int)count);
count = 0;
while (len > 0) {
- stlen = MIN(len, stlen);
+ stlen = min(len, stlen);
memcpy(head, chbuf, stlen);
len -= stlen;
chbuf += stlen;
static void stl_putchar(struct tty_struct *tty, unsigned char ch)
{
- stlport_t *portp;
+ struct stlport *portp;
unsigned int len;
char *head, *tail;
-#ifdef DEBUG
- printk("stl_putchar(tty=%x,ch=%x)\n", (int) tty, (int) ch);
-#endif
+ pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
- if (portp->tx.buf == (char *) NULL)
+ if (portp->tx.buf == NULL)
return;
head = portp->tx.head;
static void stl_flushchars(struct tty_struct *tty)
{
- stlport_t *portp;
+ struct stlport *portp;
-#ifdef DEBUG
- printk("stl_flushchars(tty=%x)\n", (int) tty);
-#endif
+ pr_debug("stl_flushchars(tty=%p)\n", tty);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
- if (portp->tx.buf == (char *) NULL)
+ if (portp->tx.buf == NULL)
return;
stl_startrxtx(portp, -1, 1);
static int stl_writeroom(struct tty_struct *tty)
{
- stlport_t *portp;
+ struct stlport *portp;
char *head, *tail;
-#ifdef DEBUG
- printk("stl_writeroom(tty=%x)\n", (int) tty);
-#endif
+ pr_debug("stl_writeroom(tty=%p)\n", tty);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return 0;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return 0;
- if (portp->tx.buf == (char *) NULL)
+ if (portp->tx.buf == NULL)
return 0;
head = portp->tx.head;
tail = portp->tx.tail;
- return ((head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1));
+ return (head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1);
}
/*****************************************************************************/
static int stl_charsinbuffer(struct tty_struct *tty)
{
- stlport_t *portp;
+ struct stlport *portp;
unsigned int size;
char *head, *tail;
-#ifdef DEBUG
- printk("stl_charsinbuffer(tty=%x)\n", (int) tty);
-#endif
+ pr_debug("stl_charsinbuffer(tty=%p)\n", tty);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return 0;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return 0;
- if (portp->tx.buf == (char *) NULL)
+ if (portp->tx.buf == NULL)
return 0;
head = portp->tx.head;
* Generate the serial struct info.
*/
-static int stl_getserial(stlport_t *portp, struct serial_struct __user *sp)
+static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
{
struct serial_struct sio;
- stlbrd_t *brdp;
+ struct stlbrd *brdp;
-#ifdef DEBUG
- printk("stl_getserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
-#endif
+ pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp);
memset(&sio, 0, sizeof(struct serial_struct));
sio.line = portp->portnr;
}
brdp = stl_brds[portp->brdnr];
- if (brdp != (stlbrd_t *) NULL)
+ if (brdp != NULL)
sio.irq = brdp->irq;
return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0;
* just quietly ignore any requests to change irq, etc.
*/
-static int stl_setserial(stlport_t *portp, struct serial_struct __user *sp)
+static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp)
{
struct serial_struct sio;
-#ifdef DEBUG
- printk("stl_setserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
-#endif
+ pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp);
if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
return -EFAULT;
static int stl_tiocmget(struct tty_struct *tty, struct file *file)
{
- stlport_t *portp;
+ struct stlport *portp;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return -ENODEV;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
static int stl_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
- stlport_t *portp;
+ struct stlport *portp;
int rts = -1, dtr = -1;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return -ENODEV;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return -ENODEV;
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
static int stl_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
{
- stlport_t *portp;
+ struct stlport *portp;
unsigned int ival;
int rc;
void __user *argp = (void __user *)arg;
-#ifdef DEBUG
- printk("stl_ioctl(tty=%x,file=%x,cmd=%x,arg=%x)\n",
- (int) tty, (int) file, cmd, (int) arg);
-#endif
+ pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty, file, cmd,
+ arg);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return -ENODEV;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) {
+ (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS))
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
- }
rc = 0;
/*****************************************************************************/
-static void stl_settermios(struct tty_struct *tty, struct termios *old)
+/*
+ * Start the transmitter again. Just turn TX interrupts back on.
+ */
+
+static void stl_start(struct tty_struct *tty)
{
- stlport_t *portp;
- struct termios *tiosp;
+ struct stlport *portp;
-#ifdef DEBUG
- printk("stl_settermios(tty=%x,old=%x)\n", (int) tty, (int) old);
-#endif
+ pr_debug("stl_start(tty=%p)\n", tty);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
+ return;
+ stl_startrxtx(portp, -1, 1);
+}
+
+/*****************************************************************************/
+
+static void stl_settermios(struct tty_struct *tty, struct ktermios *old)
+{
+ struct stlport *portp;
+ struct ktermios *tiosp;
+
+ pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old);
+
+ if (tty == NULL)
+ return;
+ portp = tty->driver_data;
+ if (portp == NULL)
return;
tiosp = tty->termios;
static void stl_throttle(struct tty_struct *tty)
{
- stlport_t *portp;
+ struct stlport *portp;
-#ifdef DEBUG
- printk("stl_throttle(tty=%x)\n", (int) tty);
-#endif
+ pr_debug("stl_throttle(tty=%p)\n", tty);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
stl_flowctrl(portp, 0);
}
static void stl_unthrottle(struct tty_struct *tty)
{
- stlport_t *portp;
+ struct stlport *portp;
-#ifdef DEBUG
- printk("stl_unthrottle(tty=%x)\n", (int) tty);
-#endif
+ pr_debug("stl_unthrottle(tty=%p)\n", tty);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
stl_flowctrl(portp, 1);
}
static void stl_stop(struct tty_struct *tty)
{
- stlport_t *portp;
+ struct stlport *portp;
-#ifdef DEBUG
- printk("stl_stop(tty=%x)\n", (int) tty);
-#endif
+ pr_debug("stl_stop(tty=%p)\n", tty);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
stl_startrxtx(portp, -1, 0);
}
/*****************************************************************************/
/*
- * Start the transmitter again. Just turn TX interrupts back on.
- */
-
-static void stl_start(struct tty_struct *tty)
-{
- stlport_t *portp;
-
-#ifdef DEBUG
- printk("stl_start(tty=%x)\n", (int) tty);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return;
- portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
- return;
- stl_startrxtx(portp, -1, 1);
-}
-
-/*****************************************************************************/
-
-/*
* Hangup this port. This is pretty much like closing the port, only
* a little more brutal. No waiting for data to drain. Shutdown the
* port and maybe drop signals.
static void stl_hangup(struct tty_struct *tty)
{
- stlport_t *portp;
+ struct stlport *portp;
-#ifdef DEBUG
- printk("stl_hangup(tty=%x)\n", (int) tty);
-#endif
+ pr_debug("stl_hangup(tty=%p)\n", tty);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
portp->flags &= ~ASYNC_INITIALIZED;
stl_flushbuffer(tty);
portp->istate = 0;
set_bit(TTY_IO_ERROR, &tty->flags);
- if (portp->tx.buf != (char *) NULL) {
+ if (portp->tx.buf != NULL) {
kfree(portp->tx.buf);
- portp->tx.buf = (char *) NULL;
- portp->tx.head = (char *) NULL;
- portp->tx.tail = (char *) NULL;
+ portp->tx.buf = NULL;
+ portp->tx.head = NULL;
+ portp->tx.tail = NULL;
}
- portp->tty = (struct tty_struct *) NULL;
+ portp->tty = NULL;
portp->flags &= ~ASYNC_NORMAL_ACTIVE;
portp->refcount = 0;
wake_up_interruptible(&portp->open_wait);
/*****************************************************************************/
-static void stl_flushbuffer(struct tty_struct *tty)
-{
- stlport_t *portp;
-
-#ifdef DEBUG
- printk("stl_flushbuffer(tty=%x)\n", (int) tty);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return;
- portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
- return;
-
- stl_flush(portp);
- tty_wakeup(tty);
-}
-
-/*****************************************************************************/
-
static void stl_breakctl(struct tty_struct *tty, int state)
{
- stlport_t *portp;
+ struct stlport *portp;
-#ifdef DEBUG
- printk("stl_breakctl(tty=%x,state=%d)\n", (int) tty, state);
-#endif
+ pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
stl_sendbreak(portp, ((state == -1) ? 1 : 2));
/*****************************************************************************/
-static void stl_waituntilsent(struct tty_struct *tty, int timeout)
-{
- stlport_t *portp;
- unsigned long tend;
-
-#ifdef DEBUG
- printk("stl_waituntilsent(tty=%x,timeout=%d)\n", (int) tty, timeout);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return;
- portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
- return;
-
- if (timeout == 0)
- timeout = HZ;
- tend = jiffies + timeout;
-
- while (stl_datastate(portp)) {
- if (signal_pending(current))
- break;
- msleep_interruptible(20);
- if (time_after_eq(jiffies, tend))
- break;
- }
-}
-
-/*****************************************************************************/
-
static void stl_sendxchar(struct tty_struct *tty, char ch)
{
- stlport_t *portp;
+ struct stlport *portp;
-#ifdef DEBUG
- printk("stl_sendxchar(tty=%x,ch=%x)\n", (int) tty, ch);
-#endif
+ pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch);
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
if (ch == STOP_CHAR(tty))
* short then padded with spaces).
*/
-static int stl_portinfo(stlport_t *portp, int portnr, char *pos)
+static int stl_portinfo(struct stlport *portp, int portnr, char *pos)
{
char *sp;
int sigs, cnt;
*sp = ' ';
sp += cnt;
- for (cnt = (sp - pos); (cnt < (MAXLINE - 1)); cnt++)
+ for (cnt = sp - pos; cnt < (MAXLINE - 1); cnt++)
*sp++ = ' ';
if (cnt >= MAXLINE)
pos[(MAXLINE - 2)] = '+';
static int stl_readproc(char *page, char **start, off_t off, int count, int *eof, void *data)
{
- stlbrd_t *brdp;
- stlpanel_t *panelp;
- stlport_t *portp;
- int brdnr, panelnr, portnr, totalport;
- int curoff, maxoff;
+ struct stlbrd *brdp;
+ struct stlpanel *panelp;
+ struct stlport *portp;
+ unsigned int brdnr, panelnr, portnr;
+ int totalport, curoff, maxoff;
char *pos;
-#ifdef DEBUG
- printk("stl_readproc(page=%x,start=%x,off=%x,count=%d,eof=%x,"
- "data=%x\n", (int) page, (int) start, (int) off, count,
- (int) eof, (int) data);
-#endif
+ pr_debug("stl_readproc(page=%p,start=%p,off=%lx,count=%d,eof=%p,"
+ "data=%p\n", page, start, off, count, eof, data);
pos = page;
totalport = 0;
* We scan through for each board, panel and port. The offset is
* calculated on the fly, and irrelevant ports are skipped.
*/
- for (brdnr = 0; (brdnr < stl_nrbrds); brdnr++) {
+ for (brdnr = 0; brdnr < stl_nrbrds; brdnr++) {
brdp = stl_brds[brdnr];
- if (brdp == (stlbrd_t *) NULL)
+ if (brdp == NULL)
continue;
if (brdp->state == 0)
continue;
}
totalport = brdnr * STL_MAXPORTS;
- for (panelnr = 0; (panelnr < brdp->nrpanels); panelnr++) {
+ for (panelnr = 0; panelnr < brdp->nrpanels; panelnr++) {
panelp = brdp->panels[panelnr];
- if (panelp == (stlpanel_t *) NULL)
+ if (panelp == NULL)
continue;
maxoff = curoff + (panelp->nrports * MAXLINE);
continue;
}
- for (portnr = 0; (portnr < panelp->nrports); portnr++,
+ for (portnr = 0; portnr < panelp->nrports; portnr++,
totalport++) {
portp = panelp->ports[portnr];
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
continue;
if (off >= (curoff += MAXLINE))
continue;
stl_readdone:
*start = page;
- return (pos - page);
+ return pos - page;
}
/*****************************************************************************/
static irqreturn_t stl_intr(int irq, void *dev_id)
{
- stlbrd_t *brdp = (stlbrd_t *) dev_id;
+ struct stlbrd *brdp = dev_id;
-#ifdef DEBUG
- printk("stl_intr(brdp=%x,irq=%d)\n", (int) brdp, irq);
-#endif
+ pr_debug("stl_intr(brdp=%p,irq=%d)\n", brdp, irq);
return IRQ_RETVAL((* brdp->isr)(brdp));
}
* Interrupt service routine for EasyIO board types.
*/
-static int stl_eiointr(stlbrd_t *brdp)
+static int stl_eiointr(struct stlbrd *brdp)
{
- stlpanel_t *panelp;
+ struct stlpanel *panelp;
unsigned int iobase;
int handled = 0;
* Interrupt service routine for ECH-AT board types.
*/
-static int stl_echatintr(stlbrd_t *brdp)
+static int stl_echatintr(struct stlbrd *brdp)
{
- stlpanel_t *panelp;
- unsigned int ioaddr;
- int bnknr;
+ struct stlpanel *panelp;
+ unsigned int ioaddr, bnknr;
int handled = 0;
outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
while (inb(brdp->iostatus) & ECH_INTRPEND) {
handled = 1;
- for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
+ for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
ioaddr = brdp->bnkstataddr[bnknr];
if (inb(ioaddr) & ECH_PNLINTRPEND) {
panelp = brdp->bnk2panel[bnknr];
* Interrupt service routine for ECH-MCA board types.
*/
-static int stl_echmcaintr(stlbrd_t *brdp)
+static int stl_echmcaintr(struct stlbrd *brdp)
{
- stlpanel_t *panelp;
- unsigned int ioaddr;
- int bnknr;
+ struct stlpanel *panelp;
+ unsigned int ioaddr, bnknr;
int handled = 0;
while (inb(brdp->iostatus) & ECH_INTRPEND) {
handled = 1;
- for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
+ for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
ioaddr = brdp->bnkstataddr[bnknr];
if (inb(ioaddr) & ECH_PNLINTRPEND) {
panelp = brdp->bnk2panel[bnknr];
* Interrupt service routine for ECH-PCI board types.
*/
-static int stl_echpciintr(stlbrd_t *brdp)
+static int stl_echpciintr(struct stlbrd *brdp)
{
- stlpanel_t *panelp;
- unsigned int ioaddr;
- int bnknr, recheck;
+ struct stlpanel *panelp;
+ unsigned int ioaddr, bnknr, recheck;
int handled = 0;
while (1) {
recheck = 0;
- for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
+ for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
outb(brdp->bnkpageaddr[bnknr], brdp->ioctrl);
ioaddr = brdp->bnkstataddr[bnknr];
if (inb(ioaddr) & ECH_PNLINTRPEND) {
* Interrupt service routine for ECH-8/64-PCI board types.
*/
-static int stl_echpci64intr(stlbrd_t *brdp)
+static int stl_echpci64intr(struct stlbrd *brdp)
{
- stlpanel_t *panelp;
- unsigned int ioaddr;
- int bnknr;
+ struct stlpanel *panelp;
+ unsigned int ioaddr, bnknr;
int handled = 0;
while (inb(brdp->ioctrl) & 0x1) {
handled = 1;
- for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
+ for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
ioaddr = brdp->bnkstataddr[bnknr];
if (inb(ioaddr) & ECH_PNLINTRPEND) {
panelp = brdp->bnk2panel[bnknr];
*/
static void stl_offintr(struct work_struct *work)
{
- stlport_t *portp = container_of(work, stlport_t, tqueue);
+ struct stlport *portp = container_of(work, struct stlport, tqueue);
struct tty_struct *tty;
unsigned int oldsigs;
-#ifdef DEBUG
- printk("stl_offintr(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_offintr(portp=%p)\n", portp);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
tty = portp->tty;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
lock_kernel();
- if (test_bit(ASYI_TXLOW, &portp->istate)) {
+ if (test_bit(ASYI_TXLOW, &portp->istate))
tty_wakeup(tty);
- }
+
if (test_bit(ASYI_DCDCHANGE, &portp->istate)) {
clear_bit(ASYI_DCDCHANGE, &portp->istate);
oldsigs = portp->sigs;
portp->sigs = stl_getsignals(portp);
if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0))
wake_up_interruptible(&portp->open_wait);
- if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0)) {
+ if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0))
if (portp->flags & ASYNC_CHECK_CD)
tty_hangup(tty); /* FIXME: module removal race here - AKPM */
- }
}
unlock_kernel();
}
* Initialize all the ports on a panel.
*/
-static int __init stl_initports(stlbrd_t *brdp, stlpanel_t *panelp)
+static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp)
{
- stlport_t *portp;
- int chipmask, i;
+ struct stlport *portp;
+ unsigned int i;
+ int chipmask;
-#ifdef DEBUG
- printk("stl_initports(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp);
-#endif
+ pr_debug("stl_initports(brdp=%p,panelp=%p)\n", brdp, panelp);
chipmask = stl_panelinit(brdp, panelp);
* All UART's are initialized (if found!). Now go through and setup
* each ports data structures.
*/
- for (i = 0; (i < panelp->nrports); i++) {
- portp = kzalloc(sizeof(stlport_t), GFP_KERNEL);
+ for (i = 0; i < panelp->nrports; i++) {
+ portp = kzalloc(sizeof(struct stlport), GFP_KERNEL);
if (!portp) {
printk("STALLION: failed to allocate memory "
- "(size=%Zd)\n", sizeof(stlport_t));
+ "(size=%Zd)\n", sizeof(struct stlport));
break;
}
stl_portinit(brdp, panelp, portp);
}
- return(0);
+ return 0;
+}
+
+static void stl_cleanup_panels(struct stlbrd *brdp)
+{
+ struct stlpanel *panelp;
+ struct stlport *portp;
+ unsigned int j, k;
+
+ for (j = 0; j < STL_MAXPANELS; j++) {
+ panelp = brdp->panels[j];
+ if (panelp == NULL)
+ continue;
+ for (k = 0; k < STL_PORTSPERPANEL; k++) {
+ portp = panelp->ports[k];
+ if (portp == NULL)
+ continue;
+ if (portp->tty != NULL)
+ stl_hangup(portp->tty);
+ kfree(portp->tx.buf);
+ kfree(portp);
+ }
+ kfree(panelp);
+ }
}
/*****************************************************************************/
* Try to find and initialize an EasyIO board.
*/
-static inline int stl_initeio(stlbrd_t *brdp)
+static int __devinit stl_initeio(struct stlbrd *brdp)
{
- stlpanel_t *panelp;
+ struct stlpanel *panelp;
unsigned int status;
char *name;
- int rc;
+ int retval;
-#ifdef DEBUG
- printk("stl_initeio(brdp=%x)\n", (int) brdp);
-#endif
+ pr_debug("stl_initeio(brdp=%p)\n", brdp);
brdp->ioctrl = brdp->ioaddr1 + 1;
brdp->iostatus = brdp->ioaddr1 + 2;
(stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
printk("STALLION: invalid irq=%d for brd=%d\n",
brdp->irq, brdp->brdnr);
- return(-EINVAL);
+ retval = -EINVAL;
+ goto err;
}
outb((stl_vecmap[brdp->irq] | EIO_0WS |
((brdp->irqtype) ? EIO_INTLEVEL : EIO_INTEDGE)),
brdp->ioctrl);
}
+ retval = -EBUSY;
if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
"%x conflicts with another device\n", brdp->brdnr,
brdp->ioaddr1);
- return(-EBUSY);
+ goto err;
}
if (brdp->iosize2 > 0)
printk(KERN_WARNING "STALLION: Warning, also "
"releasing board %d I/O address %x \n",
brdp->brdnr, brdp->ioaddr1);
- release_region(brdp->ioaddr1, brdp->iosize1);
- return(-EBUSY);
+ goto err_rel1;
}
/*
brdp->clk = CD1400_CLK;
brdp->isr = stl_eiointr;
+ retval = -ENODEV;
switch (status & EIO_IDBITMASK) {
case EIO_8PORTM:
brdp->clk = CD1400_CLK8M;
brdp->nrports = 16;
break;
default:
- return(-ENODEV);
+ goto err_rel2;
}
break;
default:
- return(-ENODEV);
+ goto err_rel2;
}
/*
* can complete the setup.
*/
- panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
+ panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL);
if (!panelp) {
printk(KERN_WARNING "STALLION: failed to allocate memory "
- "(size=%Zd)\n", sizeof(stlpanel_t));
- return -ENOMEM;
+ "(size=%Zd)\n", sizeof(struct stlpanel));
+ retval = -ENOMEM;
+ goto err_rel2;
}
panelp->magic = STL_PANELMAGIC;
panelp->iobase = brdp->ioaddr1;
panelp->hwid = status;
if ((status & EIO_IDBITMASK) == EIO_MK3) {
- panelp->uartp = (void *) &stl_sc26198uart;
+ panelp->uartp = &stl_sc26198uart;
panelp->isr = stl_sc26198intr;
} else {
- panelp->uartp = (void *) &stl_cd1400uart;
+ panelp->uartp = &stl_cd1400uart;
panelp->isr = stl_cd1400eiointr;
}
if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
printk("STALLION: failed to register interrupt "
"routine for %s irq=%d\n", name, brdp->irq);
- rc = -ENODEV;
- } else {
- rc = 0;
+ retval = -ENODEV;
+ goto err_fr;
}
- return rc;
+
+ return 0;
+err_fr:
+ stl_cleanup_panels(brdp);
+err_rel2:
+ if (brdp->iosize2 > 0)
+ release_region(brdp->ioaddr2, brdp->iosize2);
+err_rel1:
+ release_region(brdp->ioaddr1, brdp->iosize1);
+err:
+ return retval;
}
/*****************************************************************************/
* dealing with all types of ECH board.
*/
-static inline int stl_initech(stlbrd_t *brdp)
+static int __devinit stl_initech(struct stlbrd *brdp)
{
- stlpanel_t *panelp;
- unsigned int status, nxtid, ioaddr, conflict;
- int panelnr, banknr, i;
+ struct stlpanel *panelp;
+ unsigned int status, nxtid, ioaddr, conflict, panelnr, banknr, i;
+ int retval;
char *name;
-#ifdef DEBUG
- printk("stl_initech(brdp=%x)\n", (int) brdp);
-#endif
+ pr_debug("stl_initech(brdp=%p)\n", brdp);
status = 0;
conflict = 0;
brdp->ioctrl = brdp->ioaddr1 + 1;
brdp->iostatus = brdp->ioaddr1 + 1;
status = inb(brdp->iostatus);
- if ((status & ECH_IDBITMASK) != ECH_ID)
- return(-ENODEV);
+ if ((status & ECH_IDBITMASK) != ECH_ID) {
+ retval = -ENODEV;
+ goto err;
+ }
if ((brdp->irq < 0) || (brdp->irq > 15) ||
(stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
printk("STALLION: invalid irq=%d for brd=%d\n",
brdp->irq, brdp->brdnr);
- return(-EINVAL);
+ retval = -EINVAL;
+ goto err;
}
status = ((brdp->ioaddr2 & ECH_ADDR2MASK) >> 1);
status |= (stl_vecmap[brdp->irq] << 1);
outb((status | ECH_BRDRESET), brdp->ioaddr1);
brdp->ioctrlval = ECH_INTENABLE |
((brdp->irqtype) ? ECH_INTLEVEL : ECH_INTEDGE);
- for (i = 0; (i < 10); i++)
+ for (i = 0; i < 10; i++)
outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
brdp->iosize1 = 2;
brdp->iosize2 = 32;
brdp->ioctrl = brdp->ioaddr1 + 0x20;
brdp->iostatus = brdp->ioctrl;
status = inb(brdp->iostatus);
- if ((status & ECH_IDBITMASK) != ECH_ID)
- return(-ENODEV);
+ if ((status & ECH_IDBITMASK) != ECH_ID) {
+ retval = -ENODEV;
+ goto err;
+ }
if ((brdp->irq < 0) || (brdp->irq > 15) ||
(stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
printk("STALLION: invalid irq=%d for brd=%d\n",
brdp->irq, brdp->brdnr);
- return(-EINVAL);
+ retval = -EINVAL;
+ goto err;
}
outb(ECHMC_BRDRESET, brdp->ioctrl);
outb(ECHMC_INTENABLE, brdp->ioctrl);
default:
printk("STALLION: unknown board type=%d\n", brdp->brdtype);
- return(-EINVAL);
- break;
+ retval = -EINVAL;
+ goto err;
}
/*
* Check boards for possible IO address conflicts and return fail status
* if an IO conflict found.
*/
+ retval = -EBUSY;
if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
"%x conflicts with another device\n", brdp->brdnr,
brdp->ioaddr1);
- return(-EBUSY);
+ goto err;
}
if (brdp->iosize2 > 0)
printk(KERN_WARNING "STALLION: Warning, also "
"releasing board %d I/O address %x \n",
brdp->brdnr, brdp->ioaddr1);
- release_region(brdp->ioaddr1, brdp->iosize1);
- return(-EBUSY);
+ goto err_rel1;
}
/*
panelnr = 0;
nxtid = 0;
- for (i = 0; (i < STL_MAXPANELS); i++) {
+ for (i = 0; i < STL_MAXPANELS; i++) {
if (brdp->brdtype == BRD_ECHPCI) {
outb(nxtid, brdp->ioctrl);
ioaddr = brdp->ioaddr2;
}
status = inb(ioaddr + ECH_PNLSTATUS);
if ((status & ECH_PNLIDMASK) != nxtid)
- break;
- panelp = kzalloc(sizeof(stlpanel_t), GFP_KERNEL);
+ goto err_fr;
+ panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL);
if (!panelp) {
printk("STALLION: failed to allocate memory "
- "(size=%Zd)\n", sizeof(stlpanel_t));
- break;
+ "(size=%Zd)\n", sizeof(struct stlpanel));
+ goto err_fr;
}
panelp->magic = STL_PANELMAGIC;
panelp->brdnr = brdp->brdnr;
brdp->bnkstataddr[banknr++] = ioaddr + ECH_PNLSTATUS;
if (status & ECH_PNLXPID) {
- panelp->uartp = (void *) &stl_sc26198uart;
+ panelp->uartp = &stl_sc26198uart;
panelp->isr = stl_sc26198intr;
if (status & ECH_PNL16PORT) {
panelp->nrports = 16;
brdp->bnkpageaddr[banknr] = nxtid;
brdp->bnkstataddr[banknr++] = ioaddr + 4 +
ECH_PNLSTATUS;
- } else {
+ } else
panelp->nrports = 8;
- }
} else {
- panelp->uartp = (void *) &stl_cd1400uart;
+ panelp->uartp = &stl_cd1400uart;
panelp->isr = stl_cd1400echintr;
if (status & ECH_PNL16PORT) {
panelp->nrports = 16;
brdp->panels[panelnr++] = panelp;
if ((brdp->brdtype != BRD_ECHPCI) &&
(ioaddr >= (brdp->ioaddr2 + brdp->iosize2)))
- break;
+ goto err_fr;
}
brdp->nrpanels = panelnr;
if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
printk("STALLION: failed to register interrupt "
"routine for %s irq=%d\n", name, brdp->irq);
- i = -ENODEV;
- } else {
- i = 0;
+ retval = -ENODEV;
+ goto err_fr;
}
- return(i);
+ return 0;
+err_fr:
+ stl_cleanup_panels(brdp);
+ if (brdp->iosize2 > 0)
+ release_region(brdp->ioaddr2, brdp->iosize2);
+err_rel1:
+ release_region(brdp->ioaddr1, brdp->iosize1);
+err:
+ return retval;
}
/*****************************************************************************/
* since the initial search and setup is very different.
*/
-static int __init stl_brdinit(stlbrd_t *brdp)
+static int __devinit stl_brdinit(struct stlbrd *brdp)
{
- int i;
+ int i, retval;
-#ifdef DEBUG
- printk("stl_brdinit(brdp=%x)\n", (int) brdp);
-#endif
+ pr_debug("stl_brdinit(brdp=%p)\n", brdp);
switch (brdp->brdtype) {
case BRD_EASYIO:
case BRD_EASYIOPCI:
- stl_initeio(brdp);
+ retval = stl_initeio(brdp);
+ if (retval)
+ goto err;
break;
case BRD_ECH:
case BRD_ECHMC:
case BRD_ECHPCI:
case BRD_ECH64PCI:
- stl_initech(brdp);
+ retval = stl_initech(brdp);
+ if (retval)
+ goto err;
break;
default:
printk("STALLION: board=%d is unknown board type=%d\n",
brdp->brdnr, brdp->brdtype);
- return(ENODEV);
+ retval = -ENODEV;
+ goto err;
}
- stl_brds[brdp->brdnr] = brdp;
if ((brdp->state & BRD_FOUND) == 0) {
printk("STALLION: %s board not found, board=%d io=%x irq=%d\n",
stl_brdnames[brdp->brdtype], brdp->brdnr,
brdp->ioaddr1, brdp->irq);
- return(ENODEV);
+ goto err_free;
}
- for (i = 0; (i < STL_MAXPANELS); i++)
- if (brdp->panels[i] != (stlpanel_t *) NULL)
+ for (i = 0; i < STL_MAXPANELS; i++)
+ if (brdp->panels[i] != NULL)
stl_initports(brdp, brdp->panels[i]);
printk("STALLION: %s found, board=%d io=%x irq=%d "
"nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype],
brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels,
brdp->nrports);
- return(0);
+
+ return 0;
+err_free:
+ free_irq(brdp->irq, brdp);
+
+ stl_cleanup_panels(brdp);
+
+ release_region(brdp->ioaddr1, brdp->iosize1);
+ if (brdp->iosize2 > 0)
+ release_region(brdp->ioaddr2, brdp->iosize2);
+err:
+ return retval;
}
/*****************************************************************************/
* Find the next available board number that is free.
*/
-static inline int stl_getbrdnr(void)
+static int __devinit stl_getbrdnr(void)
{
- int i;
+ unsigned int i;
- for (i = 0; (i < STL_MAXBRDS); i++) {
- if (stl_brds[i] == (stlbrd_t *) NULL) {
+ for (i = 0; i < STL_MAXBRDS; i++)
+ if (stl_brds[i] == NULL) {
if (i >= stl_nrbrds)
stl_nrbrds = i + 1;
- return(i);
+ return i;
}
- }
- return(-1);
+
+ return -1;
}
/*****************************************************************************/
-
-#ifdef CONFIG_PCI
-
/*
* We have a Stallion board. Allocate a board structure and
* initialize it. Read its IO and IRQ resources from PCI
* configuration space.
*/
-static inline int stl_initpcibrd(int brdtype, struct pci_dev *devp)
+static int __devinit stl_pciprobe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
- stlbrd_t *brdp;
-
-#ifdef DEBUG
- printk("stl_initpcibrd(brdtype=%d,busnr=%x,devnr=%x)\n", brdtype,
- devp->bus->number, devp->devfn);
-#endif
-
- if (pci_enable_device(devp))
- return(-EIO);
- if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL)
- return(-ENOMEM);
- if ((brdp->brdnr = stl_getbrdnr()) < 0) {
- printk("STALLION: too many boards found, "
+ struct stlbrd *brdp;
+ unsigned int i, brdtype = ent->driver_data;
+ int brdnr, retval = -ENODEV;
+
+ if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
+ goto err;
+
+ dev_info(&pdev->dev, "please, report this to LKML: %x/%x/%x\n",
+ pdev->vendor, pdev->device, pdev->class);
+
+ retval = pci_enable_device(pdev);
+ if (retval)
+ goto err;
+ brdp = stl_allocbrd();
+ if (brdp == NULL) {
+ retval = -ENOMEM;
+ goto err;
+ }
+ mutex_lock(&stl_brdslock);
+ brdnr = stl_getbrdnr();
+ if (brdnr < 0) {
+ dev_err(&pdev->dev, "too many boards found, "
"maximum supported %d\n", STL_MAXBRDS);
- return(0);
+ mutex_unlock(&stl_brdslock);
+ goto err_fr;
}
- brdp->brdtype = brdtype;
+ brdp->brdnr = (unsigned int)brdnr;
+ stl_brds[brdp->brdnr] = brdp;
+ mutex_unlock(&stl_brdslock);
-/*
- * Different Stallion boards use the BAR registers in different ways,
- * so set up io addresses based on board type.
- */
-#ifdef DEBUG
- printk("%s(%d): BAR[]=%x,%x,%x,%x IRQ=%x\n", __FILE__, __LINE__,
- pci_resource_start(devp, 0), pci_resource_start(devp, 1),
- pci_resource_start(devp, 2), pci_resource_start(devp, 3), devp->irq);
-#endif
+ brdp->brdtype = brdtype;
+ brdp->state |= STL_PROBED;
/*
* We have all resources from the board, so let's setup the actual
*/
switch (brdtype) {
case BRD_ECHPCI:
- brdp->ioaddr2 = pci_resource_start(devp, 0);
- brdp->ioaddr1 = pci_resource_start(devp, 1);
+ brdp->ioaddr2 = pci_resource_start(pdev, 0);
+ brdp->ioaddr1 = pci_resource_start(pdev, 1);
break;
case BRD_ECH64PCI:
- brdp->ioaddr2 = pci_resource_start(devp, 2);
- brdp->ioaddr1 = pci_resource_start(devp, 1);
+ brdp->ioaddr2 = pci_resource_start(pdev, 2);
+ brdp->ioaddr1 = pci_resource_start(pdev, 1);
break;
case BRD_EASYIOPCI:
- brdp->ioaddr1 = pci_resource_start(devp, 2);
- brdp->ioaddr2 = pci_resource_start(devp, 1);
+ brdp->ioaddr1 = pci_resource_start(pdev, 2);
+ brdp->ioaddr2 = pci_resource_start(pdev, 1);
break;
- default:
- printk("STALLION: unknown PCI board type=%d\n", brdtype);
- break;
- }
-
- brdp->irq = devp->irq;
- stl_brdinit(brdp);
-
- return(0);
-}
-
-/*****************************************************************************/
-
-/*
- * Find all Stallion PCI boards that might be installed. Initialize each
- * one as it is found.
- */
-
-
-static inline int stl_findpcibrds(void)
-{
- struct pci_dev *dev = NULL;
- int i, rc;
-
-#ifdef DEBUG
- printk("stl_findpcibrds()\n");
-#endif
-
- for (i = 0; (i < stl_nrpcibrds); i++)
- while ((dev = pci_find_device(stl_pcibrds[i].vendid,
- stl_pcibrds[i].devid, dev))) {
-
-/*
- * Found a device on the PCI bus that has our vendor and
- * device ID. Need to check now that it is really us.
- */
- if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
- continue;
-
- rc = stl_initpcibrd(stl_pcibrds[i].brdtype, dev);
- if (rc)
- return(rc);
- }
+ default:
+ dev_err(&pdev->dev, "unknown PCI board type=%u\n", brdtype);
+ break;
+ }
- return(0);
-}
+ brdp->irq = pdev->irq;
+ retval = stl_brdinit(brdp);
+ if (retval)
+ goto err_null;
-#endif
+ pci_set_drvdata(pdev, brdp);
-/*****************************************************************************/
+ for (i = 0; i < brdp->nrports; i++)
+ tty_register_device(stl_serial,
+ brdp->brdnr * STL_MAXPORTS + i, &pdev->dev);
-/*
- * Scan through all the boards in the configuration and see what we
- * can find. Handle EIO and the ECH boards a little differently here
- * since the initial search and setup is too different.
- */
+ return 0;
+err_null:
+ stl_brds[brdp->brdnr] = NULL;
+err_fr:
+ kfree(brdp);
+err:
+ return retval;
+}
-static inline int stl_initbrds(void)
+static void __devexit stl_pciremove(struct pci_dev *pdev)
{
- stlbrd_t *brdp;
- stlconf_t *confp;
- int i;
+ struct stlbrd *brdp = pci_get_drvdata(pdev);
+ unsigned int i;
-#ifdef DEBUG
- printk("stl_initbrds()\n");
-#endif
+ free_irq(brdp->irq, brdp);
- if (stl_nrbrds > STL_MAXBRDS) {
- printk("STALLION: too many boards in configuration table, "
- "truncating to %d\n", STL_MAXBRDS);
- stl_nrbrds = STL_MAXBRDS;
- }
+ stl_cleanup_panels(brdp);
-/*
- * Firstly scan the list of static boards configured. Allocate
- * resources and initialize the boards as found.
- */
- for (i = 0; (i < stl_nrbrds); i++) {
- confp = &stl_brdconf[i];
- stl_parsebrd(confp, stl_brdsp[i]);
- if ((brdp = stl_allocbrd()) == (stlbrd_t *) NULL)
- return(-ENOMEM);
- brdp->brdnr = i;
- brdp->brdtype = confp->brdtype;
- brdp->ioaddr1 = confp->ioaddr1;
- brdp->ioaddr2 = confp->ioaddr2;
- brdp->irq = confp->irq;
- brdp->irqtype = confp->irqtype;
- stl_brdinit(brdp);
- }
+ release_region(brdp->ioaddr1, brdp->iosize1);
+ if (brdp->iosize2 > 0)
+ release_region(brdp->ioaddr2, brdp->iosize2);
-/*
- * Find any dynamically supported boards. That is via module load
- * line options or auto-detected on the PCI bus.
- */
- stl_argbrds();
-#ifdef CONFIG_PCI
- stl_findpcibrds();
-#endif
+ for (i = 0; i < brdp->nrports; i++)
+ tty_unregister_device(stl_serial,
+ brdp->brdnr * STL_MAXPORTS + i);
- return(0);
+ stl_brds[brdp->brdnr] = NULL;
+ kfree(brdp);
}
+static struct pci_driver stl_pcidriver = {
+ .name = "stallion",
+ .id_table = stl_pcibrds,
+ .probe = stl_pciprobe,
+ .remove = __devexit_p(stl_pciremove)
+};
+
/*****************************************************************************/
/*
static int stl_getbrdstats(combrd_t __user *bp)
{
- stlbrd_t *brdp;
- stlpanel_t *panelp;
- int i;
+ combrd_t stl_brdstats;
+ struct stlbrd *brdp;
+ struct stlpanel *panelp;
+ unsigned int i;
if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t)))
return -EFAULT;
if (stl_brdstats.brd >= STL_MAXBRDS)
- return(-ENODEV);
+ return -ENODEV;
brdp = stl_brds[stl_brdstats.brd];
- if (brdp == (stlbrd_t *) NULL)
- return(-ENODEV);
+ if (brdp == NULL)
+ return -ENODEV;
memset(&stl_brdstats, 0, sizeof(combrd_t));
stl_brdstats.brd = brdp->brdnr;
stl_brdstats.irq = brdp->irq;
stl_brdstats.nrpanels = brdp->nrpanels;
stl_brdstats.nrports = brdp->nrports;
- for (i = 0; (i < brdp->nrpanels); i++) {
+ for (i = 0; i < brdp->nrpanels; i++) {
panelp = brdp->panels[i];
stl_brdstats.panels[i].panel = i;
stl_brdstats.panels[i].hwid = panelp->hwid;
* Resolve the referenced port number into a port struct pointer.
*/
-static stlport_t *stl_getport(int brdnr, int panelnr, int portnr)
+static struct stlport *stl_getport(int brdnr, int panelnr, int portnr)
{
- stlbrd_t *brdp;
- stlpanel_t *panelp;
+ struct stlbrd *brdp;
+ struct stlpanel *panelp;
- if ((brdnr < 0) || (brdnr >= STL_MAXBRDS))
- return((stlport_t *) NULL);
+ if (brdnr < 0 || brdnr >= STL_MAXBRDS)
+ return NULL;
brdp = stl_brds[brdnr];
- if (brdp == (stlbrd_t *) NULL)
- return((stlport_t *) NULL);
- if ((panelnr < 0) || (panelnr >= brdp->nrpanels))
- return((stlport_t *) NULL);
+ if (brdp == NULL)
+ return NULL;
+ if (panelnr < 0 || (unsigned int)panelnr >= brdp->nrpanels)
+ return NULL;
panelp = brdp->panels[panelnr];
- if (panelp == (stlpanel_t *) NULL)
- return((stlport_t *) NULL);
- if ((portnr < 0) || (portnr >= panelp->nrports))
- return((stlport_t *) NULL);
- return(panelp->ports[portnr]);
+ if (panelp == NULL)
+ return NULL;
+ if (portnr < 0 || (unsigned int)portnr >= panelp->nrports)
+ return NULL;
+ return panelp->ports[portnr];
}
/*****************************************************************************/
* what port to get stats for (used through board control device).
*/
-static int stl_getportstats(stlport_t *portp, comstats_t __user *cp)
+static int stl_getportstats(struct stlport *portp, comstats_t __user *cp)
{
+ comstats_t stl_comstats;
unsigned char *head, *tail;
unsigned long flags;
return -EFAULT;
portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
stl_comstats.port);
- if (portp == (stlport_t *) NULL)
- return(-ENODEV);
+ if (portp == NULL)
+ return -ENODEV;
}
portp->stats.state = portp->istate;
portp->stats.rxbuffered = 0;
spin_lock_irqsave(&stallion_lock, flags);
- if (portp->tty != (struct tty_struct *) NULL) {
+ if (portp->tty != NULL)
if (portp->tty->driver_data == portp) {
portp->stats.ttystate = portp->tty->flags;
/* No longer available as a statistic */
portp->stats.rxbuffered = 1; /*portp->tty->flip.count; */
- if (portp->tty->termios != (struct termios *) NULL) {
+ if (portp->tty->termios != NULL) {
portp->stats.cflags = portp->tty->termios->c_cflag;
portp->stats.iflags = portp->tty->termios->c_iflag;
portp->stats.oflags = portp->tty->termios->c_oflag;
portp->stats.lflags = portp->tty->termios->c_lflag;
}
}
- }
spin_unlock_irqrestore(&stallion_lock, flags);
head = portp->tx.head;
tail = portp->tx.tail;
- portp->stats.txbuffered = ((head >= tail) ? (head - tail) :
- (STL_TXBUFSIZE - (tail - head)));
+ portp->stats.txbuffered = (head >= tail) ? (head - tail) :
+ (STL_TXBUFSIZE - (tail - head));
portp->stats.signals = (unsigned long) stl_getsignals(portp);
* Clear the port stats structure. We also return it zeroed out...
*/
-static int stl_clrportstats(stlport_t *portp, comstats_t __user *cp)
+static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp)
{
+ comstats_t stl_comstats;
+
if (!portp) {
if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t)))
return -EFAULT;
portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
stl_comstats.port);
- if (portp == (stlport_t *) NULL)
- return(-ENODEV);
+ if (portp == NULL)
+ return -ENODEV;
}
memset(&portp->stats, 0, sizeof(comstats_t));
* Return the entire driver ports structure to a user app.
*/
-static int stl_getportstruct(stlport_t __user *arg)
+static int stl_getportstruct(struct stlport __user *arg)
{
- stlport_t *portp;
+ struct stlport stl_dummyport;
+ struct stlport *portp;
- if (copy_from_user(&stl_dummyport, arg, sizeof(stlport_t)))
+ if (copy_from_user(&stl_dummyport, arg, sizeof(struct stlport)))
return -EFAULT;
portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr,
stl_dummyport.portnr);
if (!portp)
return -ENODEV;
- return copy_to_user(arg, portp, sizeof(stlport_t)) ? -EFAULT : 0;
+ return copy_to_user(arg, portp, sizeof(struct stlport)) ? -EFAULT : 0;
}
/*****************************************************************************/
* Return the entire driver board structure to a user app.
*/
-static int stl_getbrdstruct(stlbrd_t __user *arg)
+static int stl_getbrdstruct(struct stlbrd __user *arg)
{
- stlbrd_t *brdp;
+ struct stlbrd stl_dummybrd;
+ struct stlbrd *brdp;
- if (copy_from_user(&stl_dummybrd, arg, sizeof(stlbrd_t)))
+ if (copy_from_user(&stl_dummybrd, arg, sizeof(struct stlbrd)))
return -EFAULT;
- if ((stl_dummybrd.brdnr < 0) || (stl_dummybrd.brdnr >= STL_MAXBRDS))
+ if (stl_dummybrd.brdnr >= STL_MAXBRDS)
return -ENODEV;
brdp = stl_brds[stl_dummybrd.brdnr];
if (!brdp)
- return(-ENODEV);
- return copy_to_user(arg, brdp, sizeof(stlbrd_t)) ? -EFAULT : 0;
+ return -ENODEV;
+ return copy_to_user(arg, brdp, sizeof(struct stlbrd)) ? -EFAULT : 0;
}
/*****************************************************************************/
int brdnr, rc;
void __user *argp = (void __user *)arg;
-#ifdef DEBUG
- printk("stl_memioctl(ip=%x,fp=%x,cmd=%x,arg=%x)\n", (int) ip,
- (int) fp, cmd, (int) arg);
-#endif
+ pr_debug("stl_memioctl(ip=%p,fp=%p,cmd=%x,arg=%lx)\n", ip, fp, cmd,arg);
brdnr = iminor(ip);
if (brdnr >= STL_MAXBRDS)
- return(-ENODEV);
+ return -ENODEV;
rc = 0;
switch (cmd) {
break;
}
- return(rc);
+ return rc;
}
static const struct tty_operations stl_ops = {
};
/*****************************************************************************/
-
-static int __init stl_init(void)
-{
- int i;
- printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion);
-
- spin_lock_init(&stallion_lock);
- spin_lock_init(&brd_lock);
-
- stl_initbrds();
-
- stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
- if (!stl_serial)
- return -1;
-
-/*
- * Set up a character driver for per board stuff. This is mainly used
- * to do stats ioctls on the ports.
- */
- if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem))
- printk("STALLION: failed to register serial board device\n");
-
- stallion_class = class_create(THIS_MODULE, "staliomem");
- for (i = 0; i < 4; i++)
- class_device_create(stallion_class, NULL,
- MKDEV(STL_SIOMEMMAJOR, i), NULL,
- "staliomem%d", i);
-
- stl_serial->owner = THIS_MODULE;
- stl_serial->driver_name = stl_drvname;
- stl_serial->name = "ttyE";
- stl_serial->major = STL_SERIALMAJOR;
- stl_serial->minor_start = 0;
- stl_serial->type = TTY_DRIVER_TYPE_SERIAL;
- stl_serial->subtype = SERIAL_TYPE_NORMAL;
- stl_serial->init_termios = stl_deftermios;
- stl_serial->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(stl_serial, &stl_ops);
-
- if (tty_register_driver(stl_serial)) {
- put_tty_driver(stl_serial);
- printk("STALLION: failed to register serial driver\n");
- return -1;
- }
-
- return 0;
-}
-
-/*****************************************************************************/
/* CD1400 HARDWARE FUNCTIONS */
/*****************************************************************************/
* (Maybe should make this inline...)
*/
-static int stl_cd1400getreg(stlport_t *portp, int regnr)
+static int stl_cd1400getreg(struct stlport *portp, int regnr)
{
outb((regnr + portp->uartaddr), portp->ioaddr);
return inb(portp->ioaddr + EREG_DATA);
}
-static void stl_cd1400setreg(stlport_t *portp, int regnr, int value)
+static void stl_cd1400setreg(struct stlport *portp, int regnr, int value)
{
- outb((regnr + portp->uartaddr), portp->ioaddr);
+ outb(regnr + portp->uartaddr, portp->ioaddr);
outb(value, portp->ioaddr + EREG_DATA);
}
-static int stl_cd1400updatereg(stlport_t *portp, int regnr, int value)
+static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value)
{
- outb((regnr + portp->uartaddr), portp->ioaddr);
+ outb(regnr + portp->uartaddr, portp->ioaddr);
if (inb(portp->ioaddr + EREG_DATA) != value) {
outb(value, portp->ioaddr + EREG_DATA);
return 1;
* identical when dealing with ports.
*/
-static int stl_cd1400panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
+static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp)
{
unsigned int gfrcr;
int chipmask, i, j;
int nrchips, uartaddr, ioaddr;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_panelinit(brdp=%x,panelp=%x)\n", (int) brdp, (int) panelp);
-#endif
+ pr_debug("stl_panelinit(brdp=%p,panelp=%p)\n", brdp, panelp);
spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(panelp->brdnr, panelp->pagenr);
*/
chipmask = 0;
nrchips = panelp->nrports / CD1400_PORTS;
- for (i = 0; (i < nrchips); i++) {
+ for (i = 0; i < nrchips; i++) {
if (brdp->brdtype == BRD_ECHPCI) {
outb((panelp->pagenr + (i >> 1)), brdp->ioctrl);
ioaddr = panelp->iobase;
- } else {
+ } else
ioaddr = panelp->iobase + (EREG_BANKSIZE * (i >> 1));
- }
uartaddr = (i & 0x01) ? 0x080 : 0;
outb((GFRCR + uartaddr), ioaddr);
outb(0, (ioaddr + EREG_DATA));
outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
outb((GFRCR + uartaddr), ioaddr);
- for (j = 0; (j < CCR_MAXWAIT); j++) {
+ for (j = 0; j < CCR_MAXWAIT; j++)
if ((gfrcr = inb(ioaddr + EREG_DATA)) != 0)
break;
- }
+
if ((j >= CCR_MAXWAIT) || (gfrcr < 0x40) || (gfrcr > 0x60)) {
printk("STALLION: cd1400 not responding, "
"brd=%d panel=%d chip=%d\n",
* Initialize hardware specific port registers.
*/
-static void stl_cd1400portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp)
+static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp)
{
unsigned long flags;
-#ifdef DEBUG
- printk("stl_cd1400portinit(brdp=%x,panelp=%x,portp=%x)\n",
- (int) brdp, (int) panelp, (int) portp);
-#endif
+ pr_debug("stl_cd1400portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp,
+ panelp, portp);
- if ((brdp == (stlbrd_t *) NULL) || (panelp == (stlpanel_t *) NULL) ||
- (portp == (stlport_t *) NULL))
+ if ((brdp == NULL) || (panelp == NULL) ||
+ (portp == NULL))
return;
spin_lock_irqsave(&brd_lock, flags);
* since it won't usually take too long to be ready.
*/
-static void stl_cd1400ccrwait(stlport_t *portp)
+static void stl_cd1400ccrwait(struct stlport *portp)
{
int i;
- for (i = 0; (i < CCR_MAXWAIT); i++) {
- if (stl_cd1400getreg(portp, CCR) == 0) {
+ for (i = 0; i < CCR_MAXWAIT; i++)
+ if (stl_cd1400getreg(portp, CCR) == 0)
return;
- }
- }
printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n",
portp->portnr, portp->panelnr, portp->brdnr);
* settings.
*/
-static void stl_cd1400setport(stlport_t *portp, struct termios *tiosp)
+static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp)
{
- stlbrd_t *brdp;
+ struct stlbrd *brdp;
unsigned long flags;
unsigned int clkdiv, baudrate;
unsigned char cor1, cor2, cor3;
sreroff = 0;
brdp = stl_brds[portp->brdnr];
- if (brdp == (stlbrd_t *) NULL)
+ if (brdp == NULL)
return;
/*
baudrate = STL_CD1400MAXBAUD;
if (baudrate > 0) {
- for (clk = 0; (clk < CD1400_NUMCLKS); clk++) {
- clkdiv = ((portp->clk / stl_cd1400clkdivs[clk]) / baudrate);
+ for (clk = 0; clk < CD1400_NUMCLKS; clk++) {
+ clkdiv = (portp->clk / stl_cd1400clkdivs[clk]) / baudrate;
if (clkdiv < 0x100)
break;
}
mcor2 |= MCOR2_DCD;
sreron |= SRER_MODEM;
portp->flags |= ASYNC_CHECK_CD;
- } else {
+ } else
portp->flags &= ~ASYNC_CHECK_CD;
- }
/*
* Setup cd1400 enhanced modes if we can. In particular we want to
* them all up.
*/
-#ifdef DEBUG
- printk("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
+ pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
portp->portnr, portp->panelnr, portp->brdnr);
- printk(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n",
+ pr_debug(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n",
cor1, cor2, cor3, cor4, cor5);
- printk(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n",
+ pr_debug(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n",
mcor1, mcor2, rtpr, sreron, sreroff);
- printk(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div);
- printk(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
+ pr_debug(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div);
+ pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
-#endif
spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
* Set the state of the DTR and RTS signals.
*/
-static void stl_cd1400setsignals(stlport_t *portp, int dtr, int rts)
+static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts)
{
unsigned char msvr1, msvr2;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_cd1400setsignals(portp=%x,dtr=%d,rts=%d)\n",
- (int) portp, dtr, rts);
-#endif
+ pr_debug("stl_cd1400setsignals(portp=%p,dtr=%d,rts=%d)\n",
+ portp, dtr, rts);
msvr1 = 0;
msvr2 = 0;
* Return the state of the signals.
*/
-static int stl_cd1400getsignals(stlport_t *portp)
+static int stl_cd1400getsignals(struct stlport *portp)
{
unsigned char msvr1, msvr2;
unsigned long flags;
int sigs;
-#ifdef DEBUG
- printk("stl_cd1400getsignals(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_cd1400getsignals(portp=%p)\n", portp);
spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
* Enable/Disable the Transmitter and/or Receiver.
*/
-static void stl_cd1400enablerxtx(stlport_t *portp, int rx, int tx)
+static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx)
{
unsigned char ccr;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_cd1400enablerxtx(portp=%x,rx=%d,tx=%d)\n",
- (int) portp, rx, tx);
-#endif
+ pr_debug("stl_cd1400enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx);
+
ccr = 0;
if (tx == 0)
* Start/stop the Transmitter and/or Receiver.
*/
-static void stl_cd1400startrxtx(stlport_t *portp, int rx, int tx)
+static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx)
{
unsigned char sreron, sreroff;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_cd1400startrxtx(portp=%x,rx=%d,tx=%d)\n",
- (int) portp, rx, tx);
-#endif
+ pr_debug("stl_cd1400startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx);
sreron = 0;
sreroff = 0;
* Disable all interrupts from this port.
*/
-static void stl_cd1400disableintrs(stlport_t *portp)
+static void stl_cd1400disableintrs(struct stlport *portp)
{
unsigned long flags;
-#ifdef DEBUG
- printk("stl_cd1400disableintrs(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_cd1400disableintrs(portp=%p)\n", portp);
+
spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
/*****************************************************************************/
-static void stl_cd1400sendbreak(stlport_t *portp, int len)
+static void stl_cd1400sendbreak(struct stlport *portp, int len)
{
unsigned long flags;
-#ifdef DEBUG
- printk("stl_cd1400sendbreak(portp=%x,len=%d)\n", (int) portp, len);
-#endif
+ pr_debug("stl_cd1400sendbreak(portp=%p,len=%d)\n", portp, len);
spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
* Take flow control actions...
*/
-static void stl_cd1400flowctrl(stlport_t *portp, int state)
+static void stl_cd1400flowctrl(struct stlport *portp, int state)
{
struct tty_struct *tty;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_cd1400flowctrl(portp=%x,state=%x)\n", (int) portp, state);
-#endif
+ pr_debug("stl_cd1400flowctrl(portp=%p,state=%x)\n", portp, state);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
tty = portp->tty;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
spin_lock_irqsave(&brd_lock, flags);
* Send a flow control character...
*/
-static void stl_cd1400sendflow(stlport_t *portp, int state)
+static void stl_cd1400sendflow(struct stlport *portp, int state)
{
struct tty_struct *tty;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_cd1400sendflow(portp=%x,state=%x)\n", (int) portp, state);
-#endif
+ pr_debug("stl_cd1400sendflow(portp=%p,state=%x)\n", portp, state);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
tty = portp->tty;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
spin_lock_irqsave(&brd_lock, flags);
/*****************************************************************************/
-static void stl_cd1400flush(stlport_t *portp)
+static void stl_cd1400flush(struct stlport *portp)
{
unsigned long flags;
-#ifdef DEBUG
- printk("stl_cd1400flush(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_cd1400flush(portp=%p)\n", portp);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
spin_lock_irqsave(&brd_lock, flags);
* maintains the busy port flag.
*/
-static int stl_cd1400datastate(stlport_t *portp)
+static int stl_cd1400datastate(struct stlport *portp)
{
-#ifdef DEBUG
- printk("stl_cd1400datastate(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_cd1400datastate(portp=%p)\n", portp);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return 0;
return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0;
* Interrupt service routine for cd1400 EasyIO boards.
*/
-static void stl_cd1400eiointr(stlpanel_t *panelp, unsigned int iobase)
+static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase)
{
unsigned char svrtype;
-#ifdef DEBUG
- printk("stl_cd1400eiointr(panelp=%x,iobase=%x)\n",
- (int) panelp, iobase);
-#endif
+ pr_debug("stl_cd1400eiointr(panelp=%p,iobase=%x)\n", panelp, iobase);
spin_lock(&brd_lock);
outb(SVRR, iobase);
* Interrupt service routine for cd1400 panels.
*/
-static void stl_cd1400echintr(stlpanel_t *panelp, unsigned int iobase)
+static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase)
{
unsigned char svrtype;
-#ifdef DEBUG
- printk("stl_cd1400echintr(panelp=%x,iobase=%x)\n", (int) panelp,
- iobase);
-#endif
+ pr_debug("stl_cd1400echintr(panelp=%p,iobase=%x)\n", panelp, iobase);
outb(SVRR, iobase);
svrtype = inb(iobase + EREG_DATA);
* this is the only way to generate them on the cd1400.
*/
-static inline int stl_cd1400breakisr(stlport_t *portp, int ioaddr)
+static int stl_cd1400breakisr(struct stlport *portp, int ioaddr)
{
if (portp->brklen == 1) {
outb((COR2 + portp->uartaddr), ioaddr);
* be NULL if the buffer has been freed.
*/
-static void stl_cd1400txisr(stlpanel_t *panelp, int ioaddr)
+static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr)
{
- stlport_t *portp;
+ struct stlport *portp;
int len, stlen;
char *head, *tail;
unsigned char ioack, srer;
-#ifdef DEBUG
- printk("stl_cd1400txisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr);
-#endif
+ pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr);
ioack = inb(ioaddr + EREG_TXACK);
if (((ioack & panelp->ackmask) != 0) ||
}
outb(srer, (ioaddr + EREG_DATA));
} else {
- len = MIN(len, CD1400_TXFIFOSIZE);
+ len = min(len, CD1400_TXFIFOSIZE);
portp->stats.txtotal += len;
- stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
+ stlen = min(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
outb((TDR + portp->uartaddr), ioaddr);
outsb((ioaddr + EREG_DATA), tail, stlen);
len -= stlen;
* shutdown a port not in user context. Need to handle this case.
*/
-static void stl_cd1400rxisr(stlpanel_t *panelp, int ioaddr)
+static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr)
{
- stlport_t *portp;
+ struct stlport *portp;
struct tty_struct *tty;
unsigned int ioack, len, buflen;
unsigned char status;
char ch;
-#ifdef DEBUG
- printk("stl_cd1400rxisr(panelp=%x,ioaddr=%x)\n", (int) panelp, ioaddr);
-#endif
+ pr_debug("stl_cd1400rxisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr);
ioack = inb(ioaddr + EREG_RXACK);
if ((ioack & panelp->ackmask) != 0) {
outb((RDCR + portp->uartaddr), ioaddr);
len = inb(ioaddr + EREG_DATA);
if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
- len = MIN(len, sizeof(stl_unwanted));
+ len = min(len, sizeof(stl_unwanted));
outb((RDSR + portp->uartaddr), ioaddr);
insb((ioaddr + EREG_DATA), &stl_unwanted[0], len);
portp->stats.rxlost += len;
portp->stats.rxtotal += len;
} else {
- len = MIN(len, buflen);
+ len = min(len, buflen);
if (len > 0) {
unsigned char *ptr;
outb((RDSR + portp->uartaddr), ioaddr);
do_SAK(tty);
BRDENABLE(portp->brdnr, portp->pagenr);
}
- } else if (status & ST_PARITY) {
+ } else if (status & ST_PARITY)
status = TTY_PARITY;
- } else if (status & ST_FRAMING) {
+ else if (status & ST_FRAMING)
status = TTY_FRAME;
- } else if(status & ST_OVERRUN) {
+ else if(status & ST_OVERRUN)
status = TTY_OVERRUN;
- } else {
+ else
status = 0;
- }
- } else {
+ } else
status = 0;
- }
tty_insert_flip_char(tty, ch, status);
tty_schedule_flip(tty);
}
* processing routine.
*/
-static void stl_cd1400mdmisr(stlpanel_t *panelp, int ioaddr)
+static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr)
{
- stlport_t *portp;
+ struct stlport *portp;
unsigned int ioack;
unsigned char misr;
-#ifdef DEBUG
- printk("stl_cd1400mdmisr(panelp=%x)\n", (int) panelp);
-#endif
+ pr_debug("stl_cd1400mdmisr(panelp=%p)\n", panelp);
ioack = inb(ioaddr + EREG_MDACK);
if (((ioack & panelp->ackmask) != 0) ||
* (Maybe should make this inline...)
*/
-static int stl_sc26198getreg(stlport_t *portp, int regnr)
+static int stl_sc26198getreg(struct stlport *portp, int regnr)
{
outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
return inb(portp->ioaddr + XP_DATA);
}
-static void stl_sc26198setreg(stlport_t *portp, int regnr, int value)
+static void stl_sc26198setreg(struct stlport *portp, int regnr, int value)
{
outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
outb(value, (portp->ioaddr + XP_DATA));
}
-static int stl_sc26198updatereg(stlport_t *portp, int regnr, int value)
+static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value)
{
outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
if (inb(portp->ioaddr + XP_DATA) != value) {
* Functions to get and set the sc26198 global registers.
*/
-static int stl_sc26198getglobreg(stlport_t *portp, int regnr)
+static int stl_sc26198getglobreg(struct stlport *portp, int regnr)
{
outb(regnr, (portp->ioaddr + XP_ADDR));
return inb(portp->ioaddr + XP_DATA);
}
#if 0
-static void stl_sc26198setglobreg(stlport_t *portp, int regnr, int value)
+static void stl_sc26198setglobreg(struct stlport *portp, int regnr, int value)
{
outb(regnr, (portp->ioaddr + XP_ADDR));
outb(value, (portp->ioaddr + XP_DATA));
* identical when dealing with ports.
*/
-static int stl_sc26198panelinit(stlbrd_t *brdp, stlpanel_t *panelp)
+static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp)
{
int chipmask, i;
int nrchips, ioaddr;
-#ifdef DEBUG
- printk("stl_sc26198panelinit(brdp=%x,panelp=%x)\n",
- (int) brdp, (int) panelp);
-#endif
+ pr_debug("stl_sc26198panelinit(brdp=%p,panelp=%p)\n", brdp, panelp);
BRDENABLE(panelp->brdnr, panelp->pagenr);
if (brdp->brdtype == BRD_ECHPCI)
outb(panelp->pagenr, brdp->ioctrl);
- for (i = 0; (i < nrchips); i++) {
+ for (i = 0; i < nrchips; i++) {
ioaddr = panelp->iobase + (i * 4);
outb(SCCR, (ioaddr + XP_ADDR));
outb(CR_RESETALL, (ioaddr + XP_DATA));
* Initialize hardware specific port registers.
*/
-static void stl_sc26198portinit(stlbrd_t *brdp, stlpanel_t *panelp, stlport_t *portp)
+static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp)
{
-#ifdef DEBUG
- printk("stl_sc26198portinit(brdp=%x,panelp=%x,portp=%x)\n",
- (int) brdp, (int) panelp, (int) portp);
-#endif
+ pr_debug("stl_sc26198portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp,
+ panelp, portp);
- if ((brdp == (stlbrd_t *) NULL) || (panelp == (stlpanel_t *) NULL) ||
- (portp == (stlport_t *) NULL))
+ if ((brdp == NULL) || (panelp == NULL) ||
+ (portp == NULL))
return;
portp->ioaddr = panelp->iobase + ((portp->portnr < 8) ? 0 : 4);
* settings.
*/
-static void stl_sc26198setport(stlport_t *portp, struct termios *tiosp)
+static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp)
{
- stlbrd_t *brdp;
+ struct stlbrd *brdp;
unsigned long flags;
unsigned int baudrate;
unsigned char mr0, mr1, mr2, clk;
imroff = 0;
brdp = stl_brds[portp->brdnr];
- if (brdp == (stlbrd_t *) NULL)
+ if (brdp == NULL)
return;
/*
mr1 |= (MR1_PARENB | MR1_PARODD);
else
mr1 |= (MR1_PARENB | MR1_PAREVEN);
- } else {
+ } else
mr1 |= MR1_PARNONE;
- }
mr1 |= MR1_ERRBLOCK;
if (baudrate > STL_SC26198MAXBAUD)
baudrate = STL_SC26198MAXBAUD;
- if (baudrate > 0) {
- for (clk = 0; (clk < SC26198_NRBAUDS); clk++) {
+ if (baudrate > 0)
+ for (clk = 0; clk < SC26198_NRBAUDS; clk++)
if (baudrate <= sc26198_baudtable[clk])
break;
- }
- }
/*
* Check what form of modem signaling is required and set it up.
if (tiosp->c_iflag & IXON) {
mr0 |= MR0_SWFTX | MR0_SWFT;
imron |= IR_XONXOFF;
- } else {
+ } else
imroff |= IR_XONXOFF;
- }
+
if (tiosp->c_iflag & IXOFF)
mr0 |= MR0_SWFRX;
* them all up.
*/
-#ifdef DEBUG
- printk("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
+ pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
portp->portnr, portp->panelnr, portp->brdnr);
- printk(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk);
- printk(" iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff);
- printk(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
+ pr_debug(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk);
+ pr_debug(" iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff);
+ pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
-#endif
spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
* Set the state of the DTR and RTS signals.
*/
-static void stl_sc26198setsignals(stlport_t *portp, int dtr, int rts)
+static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts)
{
unsigned char iopioron, iopioroff;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_sc26198setsignals(portp=%x,dtr=%d,rts=%d)\n",
- (int) portp, dtr, rts);
-#endif
+ pr_debug("stl_sc26198setsignals(portp=%p,dtr=%d,rts=%d)\n", portp,
+ dtr, rts);
iopioron = 0;
iopioroff = 0;
* Return the state of the signals.
*/
-static int stl_sc26198getsignals(stlport_t *portp)
+static int stl_sc26198getsignals(struct stlport *portp)
{
unsigned char ipr;
unsigned long flags;
int sigs;
-#ifdef DEBUG
- printk("stl_sc26198getsignals(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_sc26198getsignals(portp=%p)\n", portp);
spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
* Enable/Disable the Transmitter and/or Receiver.
*/
-static void stl_sc26198enablerxtx(stlport_t *portp, int rx, int tx)
+static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx)
{
unsigned char ccr;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_sc26198enablerxtx(portp=%x,rx=%d,tx=%d)\n",
- (int) portp, rx, tx);
-#endif
+ pr_debug("stl_sc26198enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx,tx);
ccr = portp->crenable;
if (tx == 0)
* Start/stop the Transmitter and/or Receiver.
*/
-static void stl_sc26198startrxtx(stlport_t *portp, int rx, int tx)
+static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx)
{
unsigned char imr;
unsigned long flags;
-#ifdef DEBUG
- printk("stl_sc26198startrxtx(portp=%x,rx=%d,tx=%d)\n",
- (int) portp, rx, tx);
-#endif
+ pr_debug("stl_sc26198startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx);
imr = portp->imr;
if (tx == 0)
* Disable all interrupts from this port.
*/
-static void stl_sc26198disableintrs(stlport_t *portp)
+static void stl_sc26198disableintrs(struct stlport *portp)
{
unsigned long flags;
-#ifdef DEBUG
- printk("stl_sc26198disableintrs(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_sc26198disableintrs(portp=%p)\n", portp);
spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
/*****************************************************************************/
-static void stl_sc26198sendbreak(stlport_t *portp, int len)
+static void stl_sc26198sendbreak(struct stlport *portp, int len)
{
unsigned long flags;
-#ifdef DEBUG
- printk("stl_sc26198sendbreak(portp=%x,len=%d)\n", (int) portp, len);
-#endif
+ pr_debug("stl_sc26198sendbreak(portp=%p,len=%d)\n", portp, len);
spin_lock_irqsave(&brd_lock, flags);
BRDENABLE(portp->brdnr, portp->pagenr);
if (len == 1) {
stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK);
portp->stats.txbreaks++;
- } else {
+ } else
stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK);
- }
+
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
}
* Take flow control actions...
*/
-static void stl_sc26198flowctrl(stlport_t *portp, int state)
+static void stl_sc26198flowctrl(struct stlport *portp, int state)
{
struct tty_struct *tty;
unsigned long flags;
unsigned char mr0;
-#ifdef DEBUG
- printk("stl_sc26198flowctrl(portp=%x,state=%x)\n", (int) portp, state);
-#endif
+ pr_debug("stl_sc26198flowctrl(portp=%p,state=%x)\n", portp, state);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
tty = portp->tty;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
spin_lock_irqsave(&brd_lock, flags);
* Send a flow control character.
*/
-static void stl_sc26198sendflow(stlport_t *portp, int state)
+static void stl_sc26198sendflow(struct stlport *portp, int state)
{
struct tty_struct *tty;
unsigned long flags;
unsigned char mr0;
-#ifdef DEBUG
- printk("stl_sc26198sendflow(portp=%x,state=%x)\n", (int) portp, state);
-#endif
+ pr_debug("stl_sc26198sendflow(portp=%p,state=%x)\n", portp, state);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
tty = portp->tty;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
spin_lock_irqsave(&brd_lock, flags);
/*****************************************************************************/
-static void stl_sc26198flush(stlport_t *portp)
+static void stl_sc26198flush(struct stlport *portp)
{
unsigned long flags;
-#ifdef DEBUG
- printk("stl_sc26198flush(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_sc26198flush(portp=%p)\n", portp);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
spin_lock_irqsave(&brd_lock, flags);
* check the port statusy register to be sure.
*/
-static int stl_sc26198datastate(stlport_t *portp)
+static int stl_sc26198datastate(struct stlport *portp)
{
unsigned long flags;
unsigned char sr;
-#ifdef DEBUG
- printk("stl_sc26198datastate(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_sc26198datastate(portp=%p)\n", portp);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return 0;
if (test_bit(ASYI_TXBUSY, &portp->istate))
return 1;
* to process a command...
*/
-static void stl_sc26198wait(stlport_t *portp)
+static void stl_sc26198wait(struct stlport *portp)
{
int i;
-#ifdef DEBUG
- printk("stl_sc26198wait(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_sc26198wait(portp=%p)\n", portp);
- if (portp == (stlport_t *) NULL)
+ if (portp == NULL)
return;
- for (i = 0; (i < 20); i++)
+ for (i = 0; i < 20; i++)
stl_sc26198getglobreg(portp, TSTR);
}
* automatic flow control modes of the sc26198.
*/
-static inline void stl_sc26198txunflow(stlport_t *portp, struct tty_struct *tty)
+static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty)
{
unsigned char mr0;
* Interrupt service routine for sc26198 panels.
*/
-static void stl_sc26198intr(stlpanel_t *panelp, unsigned int iobase)
+static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase)
{
- stlport_t *portp;
+ struct stlport *portp;
unsigned int iack;
spin_lock(&brd_lock);
* be NULL if the buffer has been freed.
*/
-static void stl_sc26198txisr(stlport_t *portp)
+static void stl_sc26198txisr(struct stlport *portp)
{
unsigned int ioaddr;
unsigned char mr0;
int len, stlen;
char *head, *tail;
-#ifdef DEBUG
- printk("stl_sc26198txisr(portp=%x)\n", (int) portp);
-#endif
+ pr_debug("stl_sc26198txisr(portp=%p)\n", portp);
ioaddr = portp->ioaddr;
head = portp->tx.head;
outb(mr0, (ioaddr + XP_DATA));
}
} else {
- len = MIN(len, SC26198_TXFIFOSIZE);
+ len = min(len, SC26198_TXFIFOSIZE);
portp->stats.txtotal += len;
- stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
+ stlen = min(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
outb(GTXFIFO, (ioaddr + XP_ADDR));
outsb((ioaddr + XP_DATA), tail, stlen);
len -= stlen;
* shutdown a port not in user context. Need to handle this case.
*/
-static void stl_sc26198rxisr(stlport_t *portp, unsigned int iack)
+static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack)
{
struct tty_struct *tty;
unsigned int len, buflen, ioaddr;
-#ifdef DEBUG
- printk("stl_sc26198rxisr(portp=%x,iack=%x)\n", (int) portp, iack);
-#endif
+ pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack);
tty = portp->tty;
ioaddr = portp->ioaddr;
if ((iack & IVR_TYPEMASK) == IVR_RXDATA) {
if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
- len = MIN(len, sizeof(stl_unwanted));
+ len = min(len, sizeof(stl_unwanted));
outb(GRXFIFO, (ioaddr + XP_ADDR));
insb((ioaddr + XP_DATA), &stl_unwanted[0], len);
portp->stats.rxlost += len;
portp->stats.rxtotal += len;
} else {
- len = MIN(len, buflen);
+ len = min(len, buflen);
if (len > 0) {
unsigned char *ptr;
outb(GRXFIFO, (ioaddr + XP_ADDR));
* flow control modes of the sc26198.
*/
if (test_bit(ASYI_TXFLOWED, &portp->istate)) {
- if ((tty != (struct tty_struct *) NULL) &&
- (tty->termios != (struct termios *) NULL) &&
+ if ((tty != NULL) &&
+ (tty->termios != NULL) &&
(tty->termios->c_iflag & IXANY)) {
stl_sc26198txunflow(portp, tty);
}
* Process an RX bad character.
*/
-static inline void stl_sc26198rxbadch(stlport_t *portp, unsigned char status, char ch)
+static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch)
{
struct tty_struct *tty;
unsigned int ioaddr;
if (status & SR_RXBREAK)
portp->stats.rxbreaks++;
- if ((tty != (struct tty_struct *) NULL) &&
+ if ((tty != NULL) &&
((portp->rxignoremsk & status) == 0)) {
if (portp->rxmarkmsk & status) {
if (status & SR_RXBREAK) {
do_SAK(tty);
BRDENABLE(portp->brdnr, portp->pagenr);
}
- } else if (status & SR_RXPARITY) {
+ } else if (status & SR_RXPARITY)
status = TTY_PARITY;
- } else if (status & SR_RXFRAMING) {
+ else if (status & SR_RXFRAMING)
status = TTY_FRAME;
- } else if(status & SR_RXOVERRUN) {
+ else if(status & SR_RXOVERRUN)
status = TTY_OVERRUN;
- } else {
+ else
status = 0;
- }
- } else {
+ } else
status = 0;
- }
tty_insert_flip_char(tty, ch, status);
tty_schedule_flip(tty);
* the FIFO).
*/
-static void stl_sc26198rxbadchars(stlport_t *portp)
+static void stl_sc26198rxbadchars(struct stlport *portp)
{
unsigned char status, mr1;
char ch;
* processing time.
*/
-static void stl_sc26198otherisr(stlport_t *portp, unsigned int iack)
+static void stl_sc26198otherisr(struct stlport *portp, unsigned int iack)
{
unsigned char cir, ipr, xisr;
-#ifdef DEBUG
- printk("stl_sc26198otherisr(portp=%x,iack=%x)\n", (int) portp, iack);
-#endif
+ pr_debug("stl_sc26198otherisr(portp=%p,iack=%x)\n", portp, iack);
cir = stl_sc26198getglobreg(portp, CIR);
}
}
-/*****************************************************************************/
+static void stl_free_isabrds(void)
+{
+ struct stlbrd *brdp;
+ unsigned int i;
+
+ for (i = 0; i < stl_nrbrds; i++) {
+ if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED))
+ continue;
+
+ free_irq(brdp->irq, brdp);
+
+ stl_cleanup_panels(brdp);
+
+ release_region(brdp->ioaddr1, brdp->iosize1);
+ if (brdp->iosize2 > 0)
+ release_region(brdp->ioaddr2, brdp->iosize2);
+
+ kfree(brdp);
+ stl_brds[i] = NULL;
+ }
+}
+
+/*
+ * Loadable module initialization stuff.
+ */
+static int __init stallion_module_init(void)
+{
+ struct stlbrd *brdp;
+ struct stlconf conf;
+ unsigned int i, j;
+ int retval;
+
+ printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion);
+
+ spin_lock_init(&stallion_lock);
+ spin_lock_init(&brd_lock);
+
+/*
+ * Find any dynamically supported boards. That is via module load
+ * line options.
+ */
+ for (i = stl_nrbrds; i < stl_nargs; i++) {
+ memset(&conf, 0, sizeof(conf));
+ if (stl_parsebrd(&conf, stl_brdsp[i]) == 0)
+ continue;
+ if ((brdp = stl_allocbrd()) == NULL)
+ continue;
+ brdp->brdnr = i;
+ brdp->brdtype = conf.brdtype;
+ brdp->ioaddr1 = conf.ioaddr1;
+ brdp->ioaddr2 = conf.ioaddr2;
+ brdp->irq = conf.irq;
+ brdp->irqtype = conf.irqtype;
+ if (stl_brdinit(brdp))
+ kfree(brdp);
+ else {
+ for (j = 0; j < brdp->nrports; j++)
+ tty_register_device(stl_serial,
+ brdp->brdnr * STL_MAXPORTS + j, NULL);
+ stl_brds[brdp->brdnr] = brdp;
+ stl_nrbrds = i + 1;
+ }
+ }
+
+ /* this has to be _after_ isa finding because of locking */
+ retval = pci_register_driver(&stl_pcidriver);
+ if (retval && stl_nrbrds == 0)
+ goto err;
+
+ stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
+ if (!stl_serial) {
+ retval = -ENOMEM;
+ goto err_pcidr;
+ }
+
+/*
+ * Set up a character driver for per board stuff. This is mainly used
+ * to do stats ioctls on the ports.
+ */
+ if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem))
+ printk("STALLION: failed to register serial board device\n");
+
+ stallion_class = class_create(THIS_MODULE, "staliomem");
+ if (IS_ERR(stallion_class)) {
+ retval = PTR_ERR(stallion_class);
+ goto err_reg;
+ }
+ for (i = 0; i < 4; i++)
+ class_device_create(stallion_class, NULL,
+ MKDEV(STL_SIOMEMMAJOR, i), NULL,
+ "staliomem%d", i);
+
+ stl_serial->owner = THIS_MODULE;
+ stl_serial->driver_name = stl_drvname;
+ stl_serial->name = "ttyE";
+ stl_serial->major = STL_SERIALMAJOR;
+ stl_serial->minor_start = 0;
+ stl_serial->type = TTY_DRIVER_TYPE_SERIAL;
+ stl_serial->subtype = SERIAL_TYPE_NORMAL;
+ stl_serial->init_termios = stl_deftermios;
+ stl_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty_set_operations(stl_serial, &stl_ops);
+
+ retval = tty_register_driver(stl_serial);
+ if (retval) {
+ printk("STALLION: failed to register serial driver\n");
+ goto err_clsdev;
+ }
+
+ return 0;
+err_clsdev:
+ for (i = 0; i < 4; i++)
+ class_device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
+ class_destroy(stallion_class);
+err_reg:
+ unregister_chrdev(STL_SIOMEMMAJOR, "staliomem");
+ put_tty_driver(stl_serial);
+err_pcidr:
+ pci_unregister_driver(&stl_pcidriver);
+ stl_free_isabrds();
+err:
+ return retval;
+}
+
+static void __exit stallion_module_exit(void)
+{
+ struct stlbrd *brdp;
+ unsigned int i, j;
+ int retval;
+
+ pr_debug("cleanup_module()\n");
+
+ printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle,
+ stl_drvversion);
+
+/*
+ * Free up all allocated resources used by the ports. This includes
+ * memory and interrupts. As part of this process we will also do
+ * a hangup on every open port - to try to flush out any processes
+ * hanging onto ports.
+ */
+ for (i = 0; i < stl_nrbrds; i++) {
+ if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED))
+ continue;
+ for (j = 0; j < brdp->nrports; j++)
+ tty_unregister_device(stl_serial,
+ brdp->brdnr * STL_MAXPORTS + j);
+ }
+ tty_unregister_driver(stl_serial);
+ put_tty_driver(stl_serial);
+
+ for (i = 0; i < 4; i++)
+ class_device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
+ if ((retval = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem")))
+ printk("STALLION: failed to un-register serial memory device, "
+ "errno=%d\n", -retval);
+ class_destroy(stallion_class);
+
+ pci_unregister_driver(&stl_pcidriver);
+
+ stl_free_isabrds();
+}
+
+module_init(stallion_module_init);
+module_exit(stallion_module_exit);
+
+MODULE_AUTHOR("Greg Ungerer");
+MODULE_DESCRIPTION("Stallion Multiport Serial Driver");
+MODULE_LICENSE("GPL");
* USA.
*
* Revision history:
- * $Log: sx.c,v $
* Revision 1.33 2000/03/09 10:00:00 pvdl,wolff
* - Fixed module and port counting
* - Fixed signal handling
*
* */
-
-#define RCS_ID "$Id: sx.c,v 1.33 2000/03/08 10:01:02 wolff, pvdl Exp $"
-#define RCS_REV "$Revision: 1.33 $"
+#define SX_VERSION 1.33
#include <linux/module.h>
#include <linux/kdev_t.h>
#include <linux/fcntl.h>
#include <linux/major.h>
#include <linux/delay.h>
+#include <linux/eisa.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/generic_serial.h>
#include "sx.h"
-
/* I don't think that this driver can handle more than 256 ports on
one machine. You'll have to increase the number of boards in sx.h
if you want more than 4 boards. */
#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000
#endif
-#ifdef CONFIG_PCI
-static struct pci_device_id sx_pci_tbl[] = {
- { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, PCI_ANY_ID, PCI_ANY_ID },
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, sx_pci_tbl);
-#endif /* CONFIG_PCI */
-
/* Configurable options:
(Don't be too sure that it'll work if you toggle them) */
/* Am I paranoid or not ? ;-) */
#undef SX_PARANOIA_CHECK
-
/* 20 -> 2000 per second. The card should rate-limit interrupts at 100
Hz, but it is user configurable. I don't recommend going above 1000
Hz. The interrupt ratelimit might trigger if the interrupt is
interrupt. Use polling. */
#undef IRQ_RATE_LIMIT
-
#if 0
/* Not implemented */
/*
*/
#define SX_REPORT_FIFO
#define SX_REPORT_OVERRUN
-#endif
-
+#endif
/* Function prototypes */
-static void sx_disable_tx_interrupts (void * ptr);
-static void sx_enable_tx_interrupts (void * ptr);
-static void sx_disable_rx_interrupts (void * ptr);
-static void sx_enable_rx_interrupts (void * ptr);
-static int sx_get_CD (void * ptr);
-static void sx_shutdown_port (void * ptr);
-static int sx_set_real_termios (void *ptr);
-static void sx_close (void *ptr);
-static int sx_chars_in_buffer (void * ptr);
-static int sx_init_board (struct sx_board *board);
-static int sx_init_portstructs (int nboards, int nports);
-static int sx_fw_ioctl (struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg);
+static void sx_disable_tx_interrupts(void *ptr);
+static void sx_enable_tx_interrupts(void *ptr);
+static void sx_disable_rx_interrupts(void *ptr);
+static void sx_enable_rx_interrupts(void *ptr);
+static int sx_get_CD(void *ptr);
+static void sx_shutdown_port(void *ptr);
+static int sx_set_real_termios(void *ptr);
+static void sx_close(void *ptr);
+static int sx_chars_in_buffer(void *ptr);
+static int sx_init_board(struct sx_board *board);
+static int sx_init_portstructs(int nboards, int nports);
+static int sx_fw_ioctl(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg);
static int sx_init_drivers(void);
-
static struct tty_driver *sx_driver;
+static DEFINE_MUTEX(sx_boards_lock);
static struct sx_board boards[SX_NBOARDS];
static struct sx_port *sx_ports;
static int sx_initialized;
static int sx_nports;
static int sx_debug;
-
/* You can have the driver poll your card.
- Set sx_poll to 1 to poll every timer tick (10ms on Intel).
This is used when the card cannot use an interrupt for some reason.
static int sx_maxints = 100;
+#ifdef CONFIG_ISA
+
/* These are the only open spaces in my computer. Yours may have more
or less.... -- REW
duh: Card at 0xa0000 is possible on HP Netserver?? -- pvdl
*/
-static int sx_probe_addrs[]= {0xc0000, 0xd0000, 0xe0000,
- 0xc8000, 0xd8000, 0xe8000};
-static int si_probe_addrs[]= {0xc0000, 0xd0000, 0xe0000,
- 0xc8000, 0xd8000, 0xe8000, 0xa0000};
-static int si1_probe_addrs[]= { 0xd0000};
+static int sx_probe_addrs[] = {
+ 0xc0000, 0xd0000, 0xe0000,
+ 0xc8000, 0xd8000, 0xe8000
+};
+static int si_probe_addrs[] = {
+ 0xc0000, 0xd0000, 0xe0000,
+ 0xc8000, 0xd8000, 0xe8000, 0xa0000
+};
+static int si1_probe_addrs[] = {
+ 0xd0000
+};
#define NR_SX_ADDRS ARRAY_SIZE(sx_probe_addrs)
#define NR_SI_ADDRS ARRAY_SIZE(si_probe_addrs)
#define NR_SI1_ADDRS ARRAY_SIZE(si1_probe_addrs)
+module_param_array(sx_probe_addrs, int, NULL, 0);
+module_param_array(si_probe_addrs, int, NULL, 0);
+#endif
/* Set the mask to all-ones. This alas, only supports 32 interrupts.
Some architectures may need more. */
static int sx_irqmask = -1;
-module_param_array(sx_probe_addrs, int, NULL, 0);
-module_param_array(si_probe_addrs, int, NULL, 0);
module_param(sx_poll, int, 0);
module_param(sx_slowpoll, int, 0);
module_param(sx_maxints, int, 0);
sx_disable_rx_interrupts,
sx_enable_rx_interrupts,
sx_get_CD,
- sx_shutdown_port,
- sx_set_real_termios,
+ sx_shutdown_port,
+ sx_set_real_termios,
sx_chars_in_buffer,
sx_close,
};
-
/*
This driver can spew a whole lot of debugging output at you. If you
need maximum performance, you should disable the DEBUG define. To
*/
#define DEBUG
-
#ifdef DEBUG
-#define sx_dprintk(f, str...) if (sx_debug & f) printk (str)
+#define sx_dprintk(f, str...) if (sx_debug & f) printk (str)
#else
-#define sx_dprintk(f, str...) /* nothing */
+#define sx_dprintk(f, str...) /* nothing */
#endif
+#define func_enter() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s\n",__FUNCTION__)
+#define func_exit() sx_dprintk(SX_DEBUG_FLOW, "sx: exit %s\n",__FUNCTION__)
-
-#define func_enter() sx_dprintk (SX_DEBUG_FLOW, "sx: enter %s\n",__FUNCTION__)
-#define func_exit() sx_dprintk (SX_DEBUG_FLOW, "sx: exit %s\n", __FUNCTION__)
-
-#define func_enter2() sx_dprintk (SX_DEBUG_FLOW, "sx: enter %s (port %d)\n", \
- __FUNCTION__, port->line)
-
-
-
+#define func_enter2() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s (port %d)\n", \
+ __FUNCTION__, port->line)
/*
* Firmware loader driver specific routines
*/
static const struct file_operations sx_fw_fops = {
- .owner = THIS_MODULE,
- .ioctl = sx_fw_ioctl,
+ .owner = THIS_MODULE,
+ .ioctl = sx_fw_ioctl,
};
static struct miscdevice sx_fw_device = {
SXCTL_MISC_MINOR, "sxctl", &sx_fw_fops
};
-
-
-
-
#ifdef SX_PARANOIA_CHECK
/* This doesn't work. Who's paranoid around here? Not me! */
-static inline int sx_paranoia_check(struct sx_port const * port,
+static inline int sx_paranoia_check(struct sx_port const *port,
char *name, const char *routine)
{
+ static const char *badmagic = KERN_ERR "sx: Warning: bad sx port magic "
+ "number for device %s in %s\n";
+ static const char *badinfo = KERN_ERR "sx: Warning: null sx port for "
+ "device %s in %s\n";
- static const char *badmagic =
- KERN_ERR "sx: Warning: bad sx port magic number for device %s in %s\n";
- static const char *badinfo =
- KERN_ERR "sx: Warning: null sx port for device %s in %s\n";
-
if (!port) {
printk(badinfo, name, routine);
return 1;
#define TIMEOUT_1 30
#define TIMEOUT_2 1000000
-
#ifdef DEBUG
static void my_hd_io(void __iomem *p, int len)
{
int i, j, ch;
unsigned char __iomem *addr = p;
- for (i=0;i<len;i+=16) {
- printk ("%p ", addr+i);
- for (j=0;j<16;j++) {
- printk ("%02x %s", readb(addr+j+i), (j==7)?" ":"");
+ for (i = 0; i < len; i += 16) {
+ printk("%p ", addr + i);
+ for (j = 0; j < 16; j++) {
+ printk("%02x %s", readb(addr + j + i),
+ (j == 7) ? " " : "");
}
- for (j=0;j<16;j++) {
- ch = readb(addr+j+i);
- printk ("%c", (ch < 0x20)?'.':((ch > 0x7f)?'.':ch));
+ for (j = 0; j < 16; j++) {
+ ch = readb(addr + j + i);
+ printk("%c", (ch < 0x20) ? '.' :
+ ((ch > 0x7f) ? '.' : ch));
}
- printk ("\n");
+ printk("\n");
}
}
static void my_hd(void *p, int len)
int i, j, ch;
unsigned char *addr = p;
- for (i=0;i<len;i+=16) {
- printk ("%p ", addr+i);
- for (j=0;j<16;j++) {
- printk ("%02x %s", addr[j+i], (j==7)?" ":"");
+ for (i = 0; i < len; i += 16) {
+ printk("%p ", addr + i);
+ for (j = 0; j < 16; j++) {
+ printk("%02x %s", addr[j + i], (j == 7) ? " " : "");
}
- for (j=0;j<16;j++) {
- ch = addr[j+i];
- printk ("%c", (ch < 0x20)?'.':((ch > 0x7f)?'.':ch));
+ for (j = 0; j < 16; j++) {
+ ch = addr[j + i];
+ printk("%c", (ch < 0x20) ? '.' :
+ ((ch > 0x7f) ? '.' : ch));
}
- printk ("\n");
+ printk("\n");
}
}
#endif
-
-
/* This needs redoing for Alpha -- REW -- Done. */
-static inline void write_sx_byte (struct sx_board *board, int offset, u8 byte)
+static inline void write_sx_byte(struct sx_board *board, int offset, u8 byte)
{
- writeb (byte, board->base+offset);
+ writeb(byte, board->base + offset);
}
-static inline u8 read_sx_byte (struct sx_board *board, int offset)
+static inline u8 read_sx_byte(struct sx_board *board, int offset)
{
- return readb (board->base+offset);
+ return readb(board->base + offset);
}
-
-static inline void write_sx_word (struct sx_board *board, int offset, u16 word)
+static inline void write_sx_word(struct sx_board *board, int offset, u16 word)
{
- writew (word, board->base+offset);
+ writew(word, board->base + offset);
}
-static inline u16 read_sx_word (struct sx_board *board, int offset)
+static inline u16 read_sx_word(struct sx_board *board, int offset)
{
- return readw (board->base + offset);
+ return readw(board->base + offset);
}
-
-static int sx_busy_wait_eq (struct sx_board *board,
- int offset, int mask, int correctval)
+static int sx_busy_wait_eq(struct sx_board *board,
+ int offset, int mask, int correctval)
{
int i;
- func_enter ();
+ func_enter();
- for (i=0; i < TIMEOUT_1 ;i++)
- if ((read_sx_byte (board, offset) & mask) == correctval) {
- func_exit ();
+ for (i = 0; i < TIMEOUT_1; i++)
+ if ((read_sx_byte(board, offset) & mask) == correctval) {
+ func_exit();
return 1;
}
- for (i=0; i < TIMEOUT_2 ;i++) {
- if ((read_sx_byte (board, offset) & mask) == correctval) {
- func_exit ();
+ for (i = 0; i < TIMEOUT_2; i++) {
+ if ((read_sx_byte(board, offset) & mask) == correctval) {
+ func_exit();
return 1;
}
- udelay (1);
+ udelay(1);
}
- func_exit ();
+ func_exit();
return 0;
}
-
-static int sx_busy_wait_neq (struct sx_board *board,
- int offset, int mask, int badval)
+static int sx_busy_wait_neq(struct sx_board *board,
+ int offset, int mask, int badval)
{
int i;
- func_enter ();
+ func_enter();
- for (i=0; i < TIMEOUT_1 ;i++)
- if ((read_sx_byte (board, offset) & mask) != badval) {
- func_exit ();
+ for (i = 0; i < TIMEOUT_1; i++)
+ if ((read_sx_byte(board, offset) & mask) != badval) {
+ func_exit();
return 1;
}
- for (i=0; i < TIMEOUT_2 ;i++) {
- if ((read_sx_byte (board, offset) & mask) != badval) {
- func_exit ();
+ for (i = 0; i < TIMEOUT_2; i++) {
+ if ((read_sx_byte(board, offset) & mask) != badval) {
+ func_exit();
return 1;
}
- udelay (1);
+ udelay(1);
}
- func_exit ();
+ func_exit();
return 0;
}
-
-
/* 5.6.4 of 6210028 r2.3 */
-static int sx_reset (struct sx_board *board)
+static int sx_reset(struct sx_board *board)
{
- func_enter ();
+ func_enter();
- if (IS_SX_BOARD (board)) {
+ if (IS_SX_BOARD(board)) {
- write_sx_byte (board, SX_CONFIG, 0);
- write_sx_byte (board, SX_RESET, 1); /* Value doesn't matter */
+ write_sx_byte(board, SX_CONFIG, 0);
+ write_sx_byte(board, SX_RESET, 1); /* Value doesn't matter */
- if (!sx_busy_wait_eq (board, SX_RESET_STATUS, 1, 0)) {
- printk (KERN_INFO "sx: Card doesn't respond to reset....\n");
+ if (!sx_busy_wait_eq(board, SX_RESET_STATUS, 1, 0)) {
+ printk(KERN_INFO "sx: Card doesn't respond to "
+ "reset...\n");
return 0;
}
} else if (IS_EISA_BOARD(board)) {
- outb(board->irq<<4, board->eisa_base+0xc02);
+ outb(board->irq << 4, board->eisa_base + 0xc02);
} else if (IS_SI1_BOARD(board)) {
- write_sx_byte (board, SI1_ISA_RESET, 0); // value does not matter
+ write_sx_byte(board, SI1_ISA_RESET, 0); /*value doesn't matter*/
} else {
/* Gory details of the SI/ISA board */
- write_sx_byte (board, SI2_ISA_RESET, SI2_ISA_RESET_SET);
- write_sx_byte (board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_CLEAR);
- write_sx_byte (board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_CLEAR);
- write_sx_byte (board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_CLEAR);
- write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR);
- write_sx_byte (board, SI2_ISA_IRQSET, SI2_ISA_IRQSET_CLEAR);
+ write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_SET);
+ write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_CLEAR);
+ write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_CLEAR);
+ write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_CLEAR);
+ write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR);
+ write_sx_byte(board, SI2_ISA_IRQSET, SI2_ISA_IRQSET_CLEAR);
}
- func_exit ();
+ func_exit();
return 1;
}
-
/* This doesn't work on machines where "NULL" isn't 0 */
/* If you have one of those, someone will need to write
the equivalent of this, which will amount to about 3 lines. I don't
want to complicate this right now. -- REW
(See, I do write comments every now and then :-) */
-#define OFFSETOF(strct, elem) ((long)&(((struct strct *)NULL)->elem))
-
-
-#define CHAN_OFFSET(port,elem) (port->ch_base + OFFSETOF (_SXCHANNEL, elem))
-#define MODU_OFFSET(board,addr,elem) (addr + OFFSETOF (_SXMODULE, elem))
-#define BRD_OFFSET(board,elem) (OFFSETOF (_SXCARD, elem))
+#define OFFSETOF(strct, elem) ((long)&(((struct strct *)NULL)->elem))
+#define CHAN_OFFSET(port,elem) (port->ch_base + OFFSETOF (_SXCHANNEL, elem))
+#define MODU_OFFSET(board,addr,elem) (addr + OFFSETOF (_SXMODULE, elem))
+#define BRD_OFFSET(board,elem) (OFFSETOF (_SXCARD, elem))
#define sx_write_channel_byte(port, elem, val) \
- write_sx_byte (port->board, CHAN_OFFSET (port, elem), val)
+ write_sx_byte (port->board, CHAN_OFFSET (port, elem), val)
#define sx_read_channel_byte(port, elem) \
- read_sx_byte (port->board, CHAN_OFFSET (port, elem))
+ read_sx_byte (port->board, CHAN_OFFSET (port, elem))
#define sx_write_channel_word(port, elem, val) \
- write_sx_word (port->board, CHAN_OFFSET (port, elem), val)
+ write_sx_word (port->board, CHAN_OFFSET (port, elem), val)
#define sx_read_channel_word(port, elem) \
- read_sx_word (port->board, CHAN_OFFSET (port, elem))
-
+ read_sx_word (port->board, CHAN_OFFSET (port, elem))
#define sx_write_module_byte(board, addr, elem, val) \
- write_sx_byte (board, MODU_OFFSET (board, addr, elem), val)
+ write_sx_byte (board, MODU_OFFSET (board, addr, elem), val)
#define sx_read_module_byte(board, addr, elem) \
- read_sx_byte (board, MODU_OFFSET (board, addr, elem))
+ read_sx_byte (board, MODU_OFFSET (board, addr, elem))
#define sx_write_module_word(board, addr, elem, val) \
- write_sx_word (board, MODU_OFFSET (board, addr, elem), val)
+ write_sx_word (board, MODU_OFFSET (board, addr, elem), val)
#define sx_read_module_word(board, addr, elem) \
- read_sx_word (board, MODU_OFFSET (board, addr, elem))
-
+ read_sx_word (board, MODU_OFFSET (board, addr, elem))
#define sx_write_board_byte(board, elem, val) \
- write_sx_byte (board, BRD_OFFSET (board, elem), val)
+ write_sx_byte (board, BRD_OFFSET (board, elem), val)
#define sx_read_board_byte(board, elem) \
- read_sx_byte (board, BRD_OFFSET (board, elem))
+ read_sx_byte (board, BRD_OFFSET (board, elem))
#define sx_write_board_word(board, elem, val) \
- write_sx_word (board, BRD_OFFSET (board, elem), val)
+ write_sx_word (board, BRD_OFFSET (board, elem), val)
#define sx_read_board_word(board, elem) \
- read_sx_word (board, BRD_OFFSET (board, elem))
+ read_sx_word (board, BRD_OFFSET (board, elem))
-
-static int sx_start_board (struct sx_board *board)
+static int sx_start_board(struct sx_board *board)
{
- if (IS_SX_BOARD (board)) {
- write_sx_byte (board, SX_CONFIG, SX_CONF_BUSEN);
+ if (IS_SX_BOARD(board)) {
+ write_sx_byte(board, SX_CONFIG, SX_CONF_BUSEN);
} else if (IS_EISA_BOARD(board)) {
write_sx_byte(board, SI2_EISA_OFF, SI2_EISA_VAL);
- outb((board->irq<<4)|4, board->eisa_base+0xc02);
+ outb((board->irq << 4) | 4, board->eisa_base + 0xc02);
} else if (IS_SI1_BOARD(board)) {
- write_sx_byte (board, SI1_ISA_RESET_CLEAR, 0);
- write_sx_byte (board, SI1_ISA_INTCL, 0);
+ write_sx_byte(board, SI1_ISA_RESET_CLEAR, 0);
+ write_sx_byte(board, SI1_ISA_INTCL, 0);
} else {
/* Don't bug me about the clear_set.
I haven't the foggiest idea what it's about -- REW */
- write_sx_byte (board, SI2_ISA_RESET, SI2_ISA_RESET_CLEAR);
- write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
+ write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_CLEAR);
+ write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
}
return 1;
}
#define SX_IRQ_REG_VAL(board) \
- ((board->flags & SX_ISA_BOARD)?(board->irq << 4):0)
+ ((board->flags & SX_ISA_BOARD) ? (board->irq << 4) : 0)
/* Note. The SX register is write-only. Therefore, we have to enable the
bus too. This is a no-op, if you don't mess with this driver... */
-static int sx_start_interrupts (struct sx_board *board)
+static int sx_start_interrupts(struct sx_board *board)
{
/* Don't call this with board->irq == 0 */
if (IS_SX_BOARD(board)) {
- write_sx_byte (board, SX_CONFIG, SX_IRQ_REG_VAL (board) |
- SX_CONF_BUSEN |
- SX_CONF_HOSTIRQ);
+ write_sx_byte(board, SX_CONFIG, SX_IRQ_REG_VAL(board) |
+ SX_CONF_BUSEN | SX_CONF_HOSTIRQ);
} else if (IS_EISA_BOARD(board)) {
- inb(board->eisa_base+0xc03);
+ inb(board->eisa_base + 0xc03);
} else if (IS_SI1_BOARD(board)) {
- write_sx_byte (board, SI1_ISA_INTCL,0);
- write_sx_byte (board, SI1_ISA_INTCL_CLEAR,0);
+ write_sx_byte(board, SI1_ISA_INTCL, 0);
+ write_sx_byte(board, SI1_ISA_INTCL_CLEAR, 0);
} else {
switch (board->irq) {
- case 11:write_sx_byte (board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_SET);break;
- case 12:write_sx_byte (board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_SET);break;
- case 15:write_sx_byte (board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_SET);break;
- default:printk (KERN_INFO "sx: SI/XIO card doesn't support interrupt %d.\n",
- board->irq);
- return 0;
+ case 11:
+ write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_SET);
+ break;
+ case 12:
+ write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_SET);
+ break;
+ case 15:
+ write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_SET);
+ break;
+ default:
+ printk(KERN_INFO "sx: SI/XIO card doesn't support "
+ "interrupt %d.\n", board->irq);
+ return 0;
}
- write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
+ write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
}
return 1;
}
-
-static int sx_send_command (struct sx_port *port,
- int command, int mask, int newstat)
+static int sx_send_command(struct sx_port *port,
+ int command, int mask, int newstat)
{
- func_enter2 ();
- write_sx_byte (port->board, CHAN_OFFSET (port, hi_hstat), command);
- func_exit ();
- return sx_busy_wait_eq (port->board, CHAN_OFFSET (port, hi_hstat), mask, newstat);
+ func_enter2();
+ write_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat), command);
+ func_exit();
+ return sx_busy_wait_eq(port->board, CHAN_OFFSET(port, hi_hstat), mask,
+ newstat);
}
-
-static char *mod_type_s (int module_type)
+static char *mod_type_s(int module_type)
{
switch (module_type) {
- case TA4: return "TA4";
- case TA8: return "TA8";
- case TA4_ASIC: return "TA4_ASIC";
- case TA8_ASIC: return "TA8_ASIC";
- case MTA_CD1400:return "MTA_CD1400";
- case SXDC: return "SXDC";
- default:return "Unknown/invalid";
+ case TA4:
+ return "TA4";
+ case TA8:
+ return "TA8";
+ case TA4_ASIC:
+ return "TA4_ASIC";
+ case TA8_ASIC:
+ return "TA8_ASIC";
+ case MTA_CD1400:
+ return "MTA_CD1400";
+ case SXDC:
+ return "SXDC";
+ default:
+ return "Unknown/invalid";
}
}
-
-static char *pan_type_s (int pan_type)
+static char *pan_type_s(int pan_type)
{
switch (pan_type) {
- case MOD_RS232DB25: return "MOD_RS232DB25";
- case MOD_RS232RJ45: return "MOD_RS232RJ45";
- case MOD_RS422DB25: return "MOD_RS422DB25";
- case MOD_PARALLEL: return "MOD_PARALLEL";
- case MOD_2_RS232DB25: return "MOD_2_RS232DB25";
- case MOD_2_RS232RJ45: return "MOD_2_RS232RJ45";
- case MOD_2_RS422DB25: return "MOD_2_RS422DB25";
- case MOD_RS232DB25MALE: return "MOD_RS232DB25MALE";
- case MOD_2_PARALLEL: return "MOD_2_PARALLEL";
- case MOD_BLANK: return "empty";
- default:return "invalid";
+ case MOD_RS232DB25:
+ return "MOD_RS232DB25";
+ case MOD_RS232RJ45:
+ return "MOD_RS232RJ45";
+ case MOD_RS422DB25:
+ return "MOD_RS422DB25";
+ case MOD_PARALLEL:
+ return "MOD_PARALLEL";
+ case MOD_2_RS232DB25:
+ return "MOD_2_RS232DB25";
+ case MOD_2_RS232RJ45:
+ return "MOD_2_RS232RJ45";
+ case MOD_2_RS422DB25:
+ return "MOD_2_RS422DB25";
+ case MOD_RS232DB25MALE:
+ return "MOD_RS232DB25MALE";
+ case MOD_2_PARALLEL:
+ return "MOD_2_PARALLEL";
+ case MOD_BLANK:
+ return "empty";
+ default:
+ return "invalid";
}
}
-
-static int mod_compat_type (int module_type)
+static int mod_compat_type(int module_type)
{
return module_type >> 4;
}
static void sx_reconfigure_port(struct sx_port *port)
{
- if (sx_read_channel_byte (port, hi_hstat) == HS_IDLE_OPEN) {
- if (sx_send_command (port, HS_CONFIG, -1, HS_IDLE_OPEN) != 1) {
- printk (KERN_WARNING "sx: Sent reconfigure command, but card didn't react.\n");
+ if (sx_read_channel_byte(port, hi_hstat) == HS_IDLE_OPEN) {
+ if (sx_send_command(port, HS_CONFIG, -1, HS_IDLE_OPEN) != 1) {
+ printk(KERN_WARNING "sx: Sent reconfigure command, but "
+ "card didn't react.\n");
}
} else {
- sx_dprintk (SX_DEBUG_TERMIOS,
- "sx: Not sending reconfigure: port isn't open (%02x).\n",
- sx_read_channel_byte (port, hi_hstat));
- }
+ sx_dprintk(SX_DEBUG_TERMIOS, "sx: Not sending reconfigure: "
+ "port isn't open (%02x).\n",
+ sx_read_channel_byte(port, hi_hstat));
+ }
}
-static void sx_setsignals (struct sx_port *port, int dtr, int rts)
+static void sx_setsignals(struct sx_port *port, int dtr, int rts)
{
int t;
- func_enter2 ();
+ func_enter2();
- t = sx_read_channel_byte (port, hi_op);
- if (dtr >= 0) t = dtr? (t | OP_DTR): (t & ~OP_DTR);
- if (rts >= 0) t = rts? (t | OP_RTS): (t & ~OP_RTS);
- sx_write_channel_byte (port, hi_op, t);
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "setsignals: %d/%d\n", dtr, rts);
+ t = sx_read_channel_byte(port, hi_op);
+ if (dtr >= 0)
+ t = dtr ? (t | OP_DTR) : (t & ~OP_DTR);
+ if (rts >= 0)
+ t = rts ? (t | OP_RTS) : (t & ~OP_RTS);
+ sx_write_channel_byte(port, hi_op, t);
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "setsignals: %d/%d\n", dtr, rts);
- func_exit ();
+ func_exit();
}
-
-
-static int sx_getsignals (struct sx_port *port)
+static int sx_getsignals(struct sx_port *port)
{
- int i_stat,o_stat;
-
- o_stat = sx_read_channel_byte (port, hi_op);
- i_stat = sx_read_channel_byte (port, hi_ip);
-
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) %02x/%02x\n",
- (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0,
- port->c_dcd, sx_get_CD (port),
- sx_read_channel_byte (port, hi_ip),
- sx_read_channel_byte (port, hi_state));
-
- return (((o_stat & OP_DTR)?TIOCM_DTR:0) |
- ((o_stat & OP_RTS)?TIOCM_RTS:0) |
- ((i_stat & IP_CTS)?TIOCM_CTS:0) |
- ((i_stat & IP_DCD)?TIOCM_CAR:0) |
- ((i_stat & IP_DSR)?TIOCM_DSR:0) |
- ((i_stat & IP_RI)?TIOCM_RNG:0)
- );
+ int i_stat, o_stat;
+
+ o_stat = sx_read_channel_byte(port, hi_op);
+ i_stat = sx_read_channel_byte(port, hi_ip);
+
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) "
+ "%02x/%02x\n",
+ (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0,
+ port->c_dcd, sx_get_CD(port),
+ sx_read_channel_byte(port, hi_ip),
+ sx_read_channel_byte(port, hi_state));
+
+ return (((o_stat & OP_DTR) ? TIOCM_DTR : 0) |
+ ((o_stat & OP_RTS) ? TIOCM_RTS : 0) |
+ ((i_stat & IP_CTS) ? TIOCM_CTS : 0) |
+ ((i_stat & IP_DCD) ? TIOCM_CAR : 0) |
+ ((i_stat & IP_DSR) ? TIOCM_DSR : 0) |
+ ((i_stat & IP_RI) ? TIOCM_RNG : 0));
}
-
-static void sx_set_baud (struct sx_port *port)
+static void sx_set_baud(struct sx_port *port)
{
int t;
if (port->board->ta_type == MOD_SXDC) {
switch (port->gs.baud) {
- /* Save some typing work... */
-#define e(x) case x:t= BAUD_ ## x ; break
- e(50);e(75);e(110);e(150);e(200);e(300);e(600);
- e(1200);e(1800);e(2000);e(2400);e(4800);e(7200);
- e(9600);e(14400);e(19200);e(28800);e(38400);
- e(56000);e(57600);e(64000);e(76800);e(115200);
- e(128000);e(150000);e(230400);e(256000);e(460800);
- e(921600);
- case 134 :t = BAUD_134_5; break;
- case 0 :t = -1;
- break;
+ /* Save some typing work... */
+#define e(x) case x: t = BAUD_ ## x; break
+ e(50);
+ e(75);
+ e(110);
+ e(150);
+ e(200);
+ e(300);
+ e(600);
+ e(1200);
+ e(1800);
+ e(2000);
+ e(2400);
+ e(4800);
+ e(7200);
+ e(9600);
+ e(14400);
+ e(19200);
+ e(28800);
+ e(38400);
+ e(56000);
+ e(57600);
+ e(64000);
+ e(76800);
+ e(115200);
+ e(128000);
+ e(150000);
+ e(230400);
+ e(256000);
+ e(460800);
+ e(921600);
+ case 134:
+ t = BAUD_134_5;
+ break;
+ case 0:
+ t = -1;
+ break;
default:
/* Can I return "invalid"? */
t = BAUD_9600;
- printk (KERN_INFO "sx: unsupported baud rate: %d.\n", port->gs.baud);
+ printk(KERN_INFO "sx: unsupported baud rate: %d.\n",
+ port->gs.baud);
break;
}
#undef e
if (t > 0) {
- /* The baud rate is not set to 0, so we're enabeling DTR... -- REW */
- sx_setsignals (port, 1, -1);
+/* The baud rate is not set to 0, so we're enabeling DTR... -- REW */
+ sx_setsignals(port, 1, -1);
/* XXX This is not TA & MTA compatible */
- sx_write_channel_byte (port, hi_csr, 0xff);
+ sx_write_channel_byte(port, hi_csr, 0xff);
- sx_write_channel_byte (port, hi_txbaud, t);
- sx_write_channel_byte (port, hi_rxbaud, t);
+ sx_write_channel_byte(port, hi_txbaud, t);
+ sx_write_channel_byte(port, hi_rxbaud, t);
} else {
- sx_setsignals (port, 0, -1);
+ sx_setsignals(port, 0, -1);
}
} else {
switch (port->gs.baud) {
-#define e(x) case x:t= CSR_ ## x ; break
- e(75);e(150);e(300);e(600);e(1200);e(2400);e(4800);
- e(1800);e(9600);
- e(19200);e(57600);e(38400);
- /* TA supports 110, but not 115200, MTA supports 115200, but not 110 */
- case 110:
+#define e(x) case x: t = CSR_ ## x; break
+ e(75);
+ e(150);
+ e(300);
+ e(600);
+ e(1200);
+ e(2400);
+ e(4800);
+ e(1800);
+ e(9600);
+ e(19200);
+ e(57600);
+ e(38400);
+/* TA supports 110, but not 115200, MTA supports 115200, but not 110 */
+ case 110:
if (port->board->ta_type == MOD_TA) {
t = CSR_110;
break;
} else {
t = CSR_9600;
- printk (KERN_INFO "sx: Unsupported baud rate: %d.\n", port->gs.baud);
+ printk(KERN_INFO "sx: Unsupported baud rate: "
+ "%d.\n", port->gs.baud);
break;
}
- case 115200:
+ case 115200:
if (port->board->ta_type == MOD_TA) {
t = CSR_9600;
- printk (KERN_INFO "sx: Unsupported baud rate: %d.\n", port->gs.baud);
+ printk(KERN_INFO "sx: Unsupported baud rate: "
+ "%d.\n", port->gs.baud);
break;
} else {
t = CSR_110;
break;
}
- case 0 :t = -1;
- break;
+ case 0:
+ t = -1;
+ break;
default:
t = CSR_9600;
- printk (KERN_INFO "sx: Unsupported baud rate: %d.\n", port->gs.baud);
+ printk(KERN_INFO "sx: Unsupported baud rate: %d.\n",
+ port->gs.baud);
break;
}
#undef e
if (t >= 0) {
- sx_setsignals (port, 1, -1);
- sx_write_channel_byte (port, hi_csr, t * 0x11);
+ sx_setsignals(port, 1, -1);
+ sx_write_channel_byte(port, hi_csr, t * 0x11);
} else {
- sx_setsignals (port, 0, -1);
+ sx_setsignals(port, 0, -1);
}
}
}
-
/* Simon Allen's version of this routine was 225 lines long. 85 is a lot
better. -- REW */
-static int sx_set_real_termios (void *ptr)
+static int sx_set_real_termios(void *ptr)
{
struct sx_port *port = ptr;
belongs (next to the drop dtr if baud == 0) -- REW */
/* sx_setsignals (port, 1, -1); */
- sx_set_baud (port);
+ sx_set_baud(port);
#define CFLAG port->gs.tty->termios->c_cflag
- sx_write_channel_byte (port, hi_mr1,
- (C_PARENB (port->gs.tty)? MR1_WITH:MR1_NONE) |
- (C_PARODD (port->gs.tty)? MR1_ODD:MR1_EVEN) |
- (C_CRTSCTS(port->gs.tty)? MR1_RTS_RXFLOW:0) |
- (((CFLAG & CSIZE)==CS8) ? MR1_8_BITS:0) |
- (((CFLAG & CSIZE)==CS7) ? MR1_7_BITS:0) |
- (((CFLAG & CSIZE)==CS6) ? MR1_6_BITS:0) |
- (((CFLAG & CSIZE)==CS5) ? MR1_5_BITS:0) );
-
- sx_write_channel_byte (port, hi_mr2,
- (C_CRTSCTS(port->gs.tty)?MR2_CTS_TXFLOW:0) |
- (C_CSTOPB (port->gs.tty)?MR2_2_STOP:MR2_1_STOP));
+ sx_write_channel_byte(port, hi_mr1,
+ (C_PARENB(port->gs.tty) ? MR1_WITH : MR1_NONE) |
+ (C_PARODD(port->gs.tty) ? MR1_ODD : MR1_EVEN) |
+ (C_CRTSCTS(port->gs.tty) ? MR1_RTS_RXFLOW : 0) |
+ (((CFLAG & CSIZE) == CS8) ? MR1_8_BITS : 0) |
+ (((CFLAG & CSIZE) == CS7) ? MR1_7_BITS : 0) |
+ (((CFLAG & CSIZE) == CS6) ? MR1_6_BITS : 0) |
+ (((CFLAG & CSIZE) == CS5) ? MR1_5_BITS : 0));
+
+ sx_write_channel_byte(port, hi_mr2,
+ (C_CRTSCTS(port->gs.tty) ? MR2_CTS_TXFLOW : 0) |
+ (C_CSTOPB(port->gs.tty) ? MR2_2_STOP :
+ MR2_1_STOP));
switch (CFLAG & CSIZE) {
- case CS8:sx_write_channel_byte (port, hi_mask, 0xff);break;
- case CS7:sx_write_channel_byte (port, hi_mask, 0x7f);break;
- case CS6:sx_write_channel_byte (port, hi_mask, 0x3f);break;
- case CS5:sx_write_channel_byte (port, hi_mask, 0x1f);break;
+ case CS8:
+ sx_write_channel_byte(port, hi_mask, 0xff);
+ break;
+ case CS7:
+ sx_write_channel_byte(port, hi_mask, 0x7f);
+ break;
+ case CS6:
+ sx_write_channel_byte(port, hi_mask, 0x3f);
+ break;
+ case CS5:
+ sx_write_channel_byte(port, hi_mask, 0x1f);
+ break;
default:
- printk (KERN_INFO "sx: Invalid wordsize: %u\n", CFLAG & CSIZE);
+ printk(KERN_INFO "sx: Invalid wordsize: %u\n", CFLAG & CSIZE);
break;
}
- sx_write_channel_byte (port, hi_prtcl,
- (I_IXON (port->gs.tty)?SP_TXEN:0) |
- (I_IXOFF (port->gs.tty)?SP_RXEN:0) |
- (I_IXANY (port->gs.tty)?SP_TANY:0) |
- SP_DCEN);
+ sx_write_channel_byte(port, hi_prtcl,
+ (I_IXON(port->gs.tty) ? SP_TXEN : 0) |
+ (I_IXOFF(port->gs.tty) ? SP_RXEN : 0) |
+ (I_IXANY(port->gs.tty) ? SP_TANY : 0) | SP_DCEN);
- sx_write_channel_byte (port, hi_break,
- (I_IGNBRK(port->gs.tty)?BR_IGN:0 |
- I_BRKINT(port->gs.tty)?BR_INT:0));
+ sx_write_channel_byte(port, hi_break,
+ (I_IGNBRK(port->gs.tty) ? BR_IGN : 0 |
+ I_BRKINT(port->gs.tty) ? BR_INT : 0));
- sx_write_channel_byte (port, hi_txon, START_CHAR (port->gs.tty));
- sx_write_channel_byte (port, hi_rxon, START_CHAR (port->gs.tty));
- sx_write_channel_byte (port, hi_txoff, STOP_CHAR (port->gs.tty));
- sx_write_channel_byte (port, hi_rxoff, STOP_CHAR (port->gs.tty));
+ sx_write_channel_byte(port, hi_txon, START_CHAR(port->gs.tty));
+ sx_write_channel_byte(port, hi_rxon, START_CHAR(port->gs.tty));
+ sx_write_channel_byte(port, hi_txoff, STOP_CHAR(port->gs.tty));
+ sx_write_channel_byte(port, hi_rxoff, STOP_CHAR(port->gs.tty));
sx_reconfigure_port(port);
/* Tell line discipline whether we will do input cooking */
- if(I_OTHER(port->gs.tty)) {
+ if (I_OTHER(port->gs.tty)) {
clear_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
} else {
set_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
}
- sx_dprintk (SX_DEBUG_TERMIOS, "iflags: %x(%d) ",
- port->gs.tty->termios->c_iflag,
- I_OTHER(port->gs.tty));
-
+ sx_dprintk(SX_DEBUG_TERMIOS, "iflags: %x(%d) ",
+ port->gs.tty->termios->c_iflag, I_OTHER(port->gs.tty));
/* Tell line discipline whether we will do output cooking.
* If OPOST is set and no other output flags are set then we can do output
* processing. Even if only *one* other flag in the O_OTHER group is set
* we do cooking in software.
*/
- if(O_OPOST(port->gs.tty) && !O_OTHER(port->gs.tty)) {
+ if (O_OPOST(port->gs.tty) && !O_OTHER(port->gs.tty)) {
set_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
} else {
clear_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
}
- sx_dprintk (SX_DEBUG_TERMIOS, "oflags: %x(%d)\n",
- port->gs.tty->termios->c_oflag,
- O_OTHER(port->gs.tty));
+ sx_dprintk(SX_DEBUG_TERMIOS, "oflags: %x(%d)\n",
+ port->gs.tty->termios->c_oflag, O_OTHER(port->gs.tty));
/* port->c_dcd = sx_get_CD (port); */
- func_exit ();
+ func_exit();
return 0;
}
-
-
/* ********************************************************************** *
* the interrupt related routines *
* ********************************************************************** */
know I'm dead against that, but I think it is required in this
case. */
-
-static void sx_transmit_chars (struct sx_port *port)
+static void sx_transmit_chars(struct sx_port *port)
{
int c;
int tx_ip;
int txroom;
- func_enter2 ();
- sx_dprintk (SX_DEBUG_TRANSMIT, "Port %p: transmit %d chars\n",
- port, port->gs.xmit_cnt);
+ func_enter2();
+ sx_dprintk(SX_DEBUG_TRANSMIT, "Port %p: transmit %d chars\n",
+ port, port->gs.xmit_cnt);
- if (test_and_set_bit (SX_PORT_TRANSMIT_LOCK, &port->locks)) {
+ if (test_and_set_bit(SX_PORT_TRANSMIT_LOCK, &port->locks)) {
return;
}
while (1) {
c = port->gs.xmit_cnt;
- sx_dprintk (SX_DEBUG_TRANSMIT, "Copying %d ", c);
- tx_ip = sx_read_channel_byte (port, hi_txipos);
+ sx_dprintk(SX_DEBUG_TRANSMIT, "Copying %d ", c);
+ tx_ip = sx_read_channel_byte(port, hi_txipos);
/* Took me 5 minutes to deduce this formula.
Luckily it is literally in the manual in section 6.5.4.3.5 */
- txroom = (sx_read_channel_byte (port, hi_txopos) - tx_ip - 1) & 0xff;
+ txroom = (sx_read_channel_byte(port, hi_txopos) - tx_ip - 1) &
+ 0xff;
/* Don't copy more bytes than there is room for in the buffer */
if (c > txroom)
c = txroom;
- sx_dprintk (SX_DEBUG_TRANSMIT, " %d(%d) ", c, txroom );
+ sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, txroom);
/* Don't copy past the end of the hardware transmit buffer */
- if (c > 0x100 - tx_ip)
+ if (c > 0x100 - tx_ip)
c = 0x100 - tx_ip;
- sx_dprintk (SX_DEBUG_TRANSMIT, " %d(%d) ", c, 0x100-tx_ip );
+ sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, 0x100 - tx_ip);
/* Don't copy pas the end of the source buffer */
- if (c > SERIAL_XMIT_SIZE - port->gs.xmit_tail)
+ if (c > SERIAL_XMIT_SIZE - port->gs.xmit_tail)
c = SERIAL_XMIT_SIZE - port->gs.xmit_tail;
- sx_dprintk (SX_DEBUG_TRANSMIT, " %d(%ld) \n",
- c, SERIAL_XMIT_SIZE- port->gs.xmit_tail);
-
- /* If for one reason or another, we can't copy more data, we're done! */
- if (c == 0) break;
+ sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%ld) \n",
+ c, SERIAL_XMIT_SIZE - port->gs.xmit_tail);
+ /* If for one reason or another, we can't copy more data, we're
+ done! */
+ if (c == 0)
+ break;
- memcpy_toio (port->board->base + CHAN_OFFSET(port,hi_txbuf) + tx_ip,
- port->gs.xmit_buf + port->gs.xmit_tail, c);
+ memcpy_toio(port->board->base + CHAN_OFFSET(port, hi_txbuf) +
+ tx_ip, port->gs.xmit_buf + port->gs.xmit_tail, c);
/* Update the pointer in the card */
- sx_write_channel_byte (port, hi_txipos, (tx_ip+c) & 0xff);
+ sx_write_channel_byte(port, hi_txipos, (tx_ip + c) & 0xff);
/* Update the kernel buffer end */
- port->gs.xmit_tail = (port->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE-1);
+ port->gs.xmit_tail = (port->gs.xmit_tail + c) &
+ (SERIAL_XMIT_SIZE - 1);
/* This one last. (this is essential)
- It would allow others to start putting more data into the buffer! */
+ It would allow others to start putting more data into the
+ buffer! */
port->gs.xmit_cnt -= c;
}
if (port->gs.xmit_cnt == 0) {
- sx_disable_tx_interrupts (port);
+ sx_disable_tx_interrupts(port);
}
if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) {
tty_wakeup(port->gs.tty);
- sx_dprintk (SX_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n",
- port->gs.wakeup_chars);
+ sx_dprintk(SX_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n",
+ port->gs.wakeup_chars);
}
- clear_bit (SX_PORT_TRANSMIT_LOCK, &port->locks);
- func_exit ();
+ clear_bit(SX_PORT_TRANSMIT_LOCK, &port->locks);
+ func_exit();
}
-
/* Note the symmetry between receiving chars and transmitting them!
Note: The kernel should have implemented both a receive buffer and
a transmit buffer. */
/* Inlined: Called only once. Remove the inline when you add another call */
-static inline void sx_receive_chars (struct sx_port *port)
+static inline void sx_receive_chars(struct sx_port *port)
{
int c;
int rx_op;
struct tty_struct *tty;
- int copied=0;
+ int copied = 0;
unsigned char *rp;
- func_enter2 ();
+ func_enter2();
tty = port->gs.tty;
while (1) {
- rx_op = sx_read_channel_byte (port, hi_rxopos);
- c = (sx_read_channel_byte (port, hi_rxipos) - rx_op) & 0xff;
+ rx_op = sx_read_channel_byte(port, hi_rxopos);
+ c = (sx_read_channel_byte(port, hi_rxipos) - rx_op) & 0xff;
- sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
+ sx_dprintk(SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
/* Don't copy past the end of the hardware receive buffer */
- if (rx_op + c > 0x100) c = 0x100 - rx_op;
+ if (rx_op + c > 0x100)
+ c = 0x100 - rx_op;
- sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
+ sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c);
/* Don't copy more bytes than there is room for in the buffer */
c = tty_prepare_flip_string(tty, &rp, c);
- sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
+ sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c);
/* If for one reason or another, we can't copy more data, we're done! */
- if (c == 0) break;
+ if (c == 0)
+ break;
- sx_dprintk (SX_DEBUG_RECEIVE , "Copying over %d chars. First is %d at %lx\n", c,
- read_sx_byte (port->board, CHAN_OFFSET(port,hi_rxbuf) + rx_op),
- CHAN_OFFSET(port, hi_rxbuf));
- memcpy_fromio (rp,
- port->board->base + CHAN_OFFSET(port,hi_rxbuf) + rx_op, c);
+ sx_dprintk(SX_DEBUG_RECEIVE, "Copying over %d chars. First is "
+ "%d at %lx\n", c, read_sx_byte(port->board,
+ CHAN_OFFSET(port, hi_rxbuf) + rx_op),
+ CHAN_OFFSET(port, hi_rxbuf));
+ memcpy_fromio(rp, port->board->base +
+ CHAN_OFFSET(port, hi_rxbuf) + rx_op, c);
/* This one last. ( Not essential.)
- It allows the card to start putting more data into the buffer!
+ It allows the card to start putting more data into the
+ buffer!
Update the pointer in the card */
- sx_write_channel_byte (port, hi_rxopos, (rx_op + c) & 0xff);
+ sx_write_channel_byte(port, hi_rxopos, (rx_op + c) & 0xff);
copied += c;
}
if (copied) {
struct timeval tv;
- do_gettimeofday (&tv);
- sx_dprintk (SX_DEBUG_RECEIVE,
- "pushing flipq port %d (%3d chars): %d.%06d (%d/%d)\n",
- port->line, copied,
- (int) (tv.tv_sec % 60), (int)tv.tv_usec, tty->raw, tty->real_raw);
+ do_gettimeofday(&tv);
+ sx_dprintk(SX_DEBUG_RECEIVE, "pushing flipq port %d (%3d "
+ "chars): %d.%06d (%d/%d)\n", port->line,
+ copied, (int)(tv.tv_sec % 60), (int)tv.tv_usec,
+ tty->raw, tty->real_raw);
- /* Tell the rest of the system the news. Great news. New characters! */
- tty_flip_buffer_push (tty);
+ /* Tell the rest of the system the news. Great news. New
+ characters! */
+ tty_flip_buffer_push(tty);
/* tty_schedule_flip (tty); */
}
- func_exit ();
+ func_exit();
}
/* Inlined: it is called only once. Remove the inline if you add another
call */
-static inline void sx_check_modem_signals (struct sx_port *port)
+static inline void sx_check_modem_signals(struct sx_port *port)
{
int hi_state;
int c_dcd;
- hi_state = sx_read_channel_byte (port, hi_state);
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n",
- port->c_dcd, sx_get_CD (port));
+ hi_state = sx_read_channel_byte(port, hi_state);
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n",
+ port->c_dcd, sx_get_CD(port));
if (hi_state & ST_BREAK) {
hi_state &= ~ST_BREAK;
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "got a break.\n");
- sx_write_channel_byte (port, hi_state, hi_state);
- gs_got_break (&port->gs);
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a break.\n");
+ sx_write_channel_byte(port, hi_state, hi_state);
+ gs_got_break(&port->gs);
}
if (hi_state & ST_DCD) {
hi_state &= ~ST_DCD;
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n");
- sx_write_channel_byte (port, hi_state, hi_state);
- c_dcd = sx_get_CD (port);
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd);
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n");
+ sx_write_channel_byte(port, hi_state, hi_state);
+ c_dcd = sx_get_CD(port);
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd);
if (c_dcd != port->c_dcd) {
port->c_dcd = c_dcd;
- if (sx_get_CD (port)) {
+ if (sx_get_CD(port)) {
/* DCD went UP */
- if ((sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) &&
- !(port->gs.tty->termios->c_cflag & CLOCAL) ) {
- /* Are we blocking in open?*/
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD active, unblocking open\n");
- wake_up_interruptible(&port->gs.open_wait);
+ if ((sx_read_channel_byte(port, hi_hstat) !=
+ HS_IDLE_CLOSED) &&
+ !(port->gs.tty->termios->
+ c_cflag & CLOCAL)) {
+ /* Are we blocking in open? */
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
+ "active, unblocking open\n");
+ wake_up_interruptible(&port->gs.
+ open_wait);
} else {
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD raised. Ignoring.\n");
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
+ "raised. Ignoring.\n");
}
} else {
/* DCD went down! */
- if (!(port->gs.tty->termios->c_cflag & CLOCAL) ) {
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD dropped. hanging up....\n");
- tty_hangup (port->gs.tty);
+ if (!(port->gs.tty->termios->c_cflag & CLOCAL)){
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
+ "dropped. hanging up....\n");
+ tty_hangup(port->gs.tty);
} else {
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD dropped. ignoring.\n");
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
+ "dropped. ignoring.\n");
}
}
} else {
- sx_dprintk (SX_DEBUG_MODEMSIGNALS, "Hmmm. card told us DCD changed, but it didn't.\n");
+ sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Hmmm. card told us "
+ "DCD changed, but it didn't.\n");
}
}
}
-
/* This is what an interrupt routine should look like.
* Small, elegant, clear.
*/
-static irqreturn_t sx_interrupt (int irq, void *ptr)
+static irqreturn_t sx_interrupt(int irq, void *ptr)
{
struct sx_board *board = ptr;
struct sx_port *port;
int i;
- func_enter ();
- sx_dprintk (SX_DEBUG_FLOW, "sx: enter sx_interrupt (%d/%d)\n", irq, board->irq);
+ func_enter();
+ sx_dprintk(SX_DEBUG_FLOW, "sx: enter sx_interrupt (%d/%d)\n", irq,
+ board->irq);
/* AAargh! The order in which to do these things is essential and
not trivial.
- Rate limit goes before "recursive". Otherwise a series of
- recursive calls will hang the machine in the interrupt routine.
+ recursive calls will hang the machine in the interrupt routine.
- hardware twiddling goes before "recursive". Otherwise when we
- poll the card, and a recursive interrupt happens, we won't
- ack the card, so it might keep on interrupting us. (especially
- level sensitive interrupt systems like PCI).
+ poll the card, and a recursive interrupt happens, we won't
+ ack the card, so it might keep on interrupting us. (especially
+ level sensitive interrupt systems like PCI).
- Rate limit goes before hardware twiddling. Otherwise we won't
- catch a card that has gone bonkers.
+ catch a card that has gone bonkers.
- The "initialized" test goes after the hardware twiddling. Otherwise
- the card will stick us in the interrupt routine again.
+ the card will stick us in the interrupt routine again.
- The initialized test goes before recursive.
- */
-
-
+ */
#ifdef IRQ_RATE_LIMIT
/* Aaargh! I'm ashamed. This costs more lines-of-code than the
- actual interrupt routine!. (Well, used to when I wrote that comment) */
+ actual interrupt routine!. (Well, used to when I wrote that
+ comment) */
{
static int lastjif;
- static int nintr=0;
+ static int nintr = 0;
if (lastjif == jiffies) {
if (++nintr > IRQ_RATE_LIMIT) {
- free_irq (board->irq, board);
- printk (KERN_ERR "sx: Too many interrupts. Turning off interrupt %d.\n",
- board->irq);
+ free_irq(board->irq, board);
+ printk(KERN_ERR "sx: Too many interrupts. "
+ "Turning off interrupt %d.\n",
+ board->irq);
}
} else {
lastjif = jiffies;
}
#endif
-
if (board->irq == irq) {
/* Tell the card we've noticed the interrupt. */
- sx_write_board_word (board, cc_int_pending, 0);
- if (IS_SX_BOARD (board)) {
- write_sx_byte (board, SX_RESET_IRQ, 1);
+ sx_write_board_word(board, cc_int_pending, 0);
+ if (IS_SX_BOARD(board)) {
+ write_sx_byte(board, SX_RESET_IRQ, 1);
} else if (IS_EISA_BOARD(board)) {
- inb(board->eisa_base+0xc03);
- write_sx_word(board, 8, 0);
+ inb(board->eisa_base + 0xc03);
+ write_sx_word(board, 8, 0);
} else {
- write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR);
- write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
+ write_sx_byte(board, SI2_ISA_INTCLEAR,
+ SI2_ISA_INTCLEAR_CLEAR);
+ write_sx_byte(board, SI2_ISA_INTCLEAR,
+ SI2_ISA_INTCLEAR_SET);
}
}
if (!(board->flags & SX_BOARD_INITIALIZED))
return IRQ_HANDLED;
- if (test_and_set_bit (SX_BOARD_INTR_LOCK, &board->locks)) {
- printk (KERN_ERR "Recursive interrupt! (%d)\n", board->irq);
+ if (test_and_set_bit(SX_BOARD_INTR_LOCK, &board->locks)) {
+ printk(KERN_ERR "Recursive interrupt! (%d)\n", board->irq);
return IRQ_HANDLED;
}
- for (i=0;i<board->nports;i++) {
+ for (i = 0; i < board->nports; i++) {
port = &board->ports[i];
if (port->gs.flags & GS_ACTIVE) {
- if (sx_read_channel_byte (port, hi_state)) {
- sx_dprintk (SX_DEBUG_INTERRUPTS,
- "Port %d: modem signal change?... \n", i);
- sx_check_modem_signals (port);
+ if (sx_read_channel_byte(port, hi_state)) {
+ sx_dprintk(SX_DEBUG_INTERRUPTS, "Port %d: "
+ "modem signal change?... \n",i);
+ sx_check_modem_signals(port);
}
if (port->gs.xmit_cnt) {
- sx_transmit_chars (port);
+ sx_transmit_chars(port);
}
if (!(port->gs.flags & SX_RX_THROTTLE)) {
- sx_receive_chars (port);
+ sx_receive_chars(port);
}
}
}
- clear_bit (SX_BOARD_INTR_LOCK, &board->locks);
+ clear_bit(SX_BOARD_INTR_LOCK, &board->locks);
- sx_dprintk (SX_DEBUG_FLOW, "sx: exit sx_interrupt (%d/%d)\n", irq, board->irq);
- func_exit ();
+ sx_dprintk(SX_DEBUG_FLOW, "sx: exit sx_interrupt (%d/%d)\n", irq,
+ board->irq);
+ func_exit();
return IRQ_HANDLED;
}
-
-static void sx_pollfunc (unsigned long data)
+static void sx_pollfunc(unsigned long data)
{
- struct sx_board *board = (struct sx_board *) data;
-
- func_enter ();
+ struct sx_board *board = (struct sx_board *)data;
- sx_interrupt (0, board);
+ func_enter();
- init_timer(&board->timer);
+ sx_interrupt(0, board);
- board->timer.expires = jiffies + sx_poll;
- add_timer (&board->timer);
- func_exit ();
+ mod_timer(&board->timer, jiffies + sx_poll);
+ func_exit();
}
-
-
/* ********************************************************************** *
* Here are the routines that actually *
* interface with the generic_serial driver *
/* Ehhm. I don't know how to fiddle with interrupts on the SX card. --REW */
/* Hmm. Ok I figured it out. You don't. */
-static void sx_disable_tx_interrupts (void * ptr)
+static void sx_disable_tx_interrupts(void *ptr)
{
- struct sx_port *port = ptr;
+ struct sx_port *port = ptr;
func_enter2();
port->gs.flags &= ~GS_TX_INTEN;
func_exit();
}
-
-static void sx_enable_tx_interrupts (void * ptr)
+static void sx_enable_tx_interrupts(void *ptr)
{
- struct sx_port *port = ptr;
+ struct sx_port *port = ptr;
int data_in_buffer;
func_enter2();
/* First transmit the characters that we're supposed to */
- sx_transmit_chars (port);
+ sx_transmit_chars(port);
/* The sx card will never interrupt us if we don't fill the buffer
past 25%. So we keep considering interrupts off if that's the case. */
- data_in_buffer = (sx_read_channel_byte (port, hi_txipos) -
- sx_read_channel_byte (port, hi_txopos)) & 0xff;
+ data_in_buffer = (sx_read_channel_byte(port, hi_txipos) -
+ sx_read_channel_byte(port, hi_txopos)) & 0xff;
/* XXX Must be "HIGH_WATER" for SI card according to doc. */
- if (data_in_buffer < LOW_WATER)
+ if (data_in_buffer < LOW_WATER)
port->gs.flags &= ~GS_TX_INTEN;
func_exit();
}
-
-static void sx_disable_rx_interrupts (void * ptr)
+static void sx_disable_rx_interrupts(void *ptr)
{
/* struct sx_port *port = ptr; */
func_enter();
func_exit();
}
-static void sx_enable_rx_interrupts (void * ptr)
+static void sx_enable_rx_interrupts(void *ptr)
{
/* struct sx_port *port = ptr; */
func_enter();
func_exit();
}
-
/* Jeez. Isn't this simple? */
-static int sx_get_CD (void * ptr)
+static int sx_get_CD(void *ptr)
{
struct sx_port *port = ptr;
func_enter2();
func_exit();
- return ((sx_read_channel_byte (port, hi_ip) & IP_DCD) != 0);
+ return ((sx_read_channel_byte(port, hi_ip) & IP_DCD) != 0);
}
-
/* Jeez. Isn't this simple? */
-static int sx_chars_in_buffer (void * ptr)
+static int sx_chars_in_buffer(void *ptr)
{
struct sx_port *port = ptr;
func_enter2();
func_exit();
- return ((sx_read_channel_byte (port, hi_txipos) -
- sx_read_channel_byte (port, hi_txopos)) & 0xff);
+ return ((sx_read_channel_byte(port, hi_txipos) -
+ sx_read_channel_byte(port, hi_txopos)) & 0xff);
}
-
-static void sx_shutdown_port (void * ptr)
+static void sx_shutdown_port(void *ptr)
{
- struct sx_port *port = ptr;
+ struct sx_port *port = ptr;
func_enter();
- port->gs.flags &= ~ GS_ACTIVE;
+ port->gs.flags &= ~GS_ACTIVE;
if (port->gs.tty && (port->gs.tty->termios->c_cflag & HUPCL)) {
- sx_setsignals (port, 0, 0);
+ sx_setsignals(port, 0, 0);
sx_reconfigure_port(port);
}
func_exit();
}
-
-
-
-
/* ********************************************************************** *
* Here are the routines that actually *
* interface with the rest of the system *
* ********************************************************************** */
-static int sx_open (struct tty_struct * tty, struct file * filp)
+static int sx_open(struct tty_struct *tty, struct file *filp)
{
struct sx_port *port;
int retval, line;
}
line = tty->index;
- sx_dprintk (SX_DEBUG_OPEN, "%d: opening line %d. tty=%p ctty=%p, np=%d)\n",
- current->pid, line, tty, current->signal->tty, sx_nports);
+ sx_dprintk(SX_DEBUG_OPEN, "%d: opening line %d. tty=%p ctty=%p, "
+ "np=%d)\n", current->pid, line, tty,
+ current->signal->tty, sx_nports);
if ((line < 0) || (line >= SX_NPORTS) || (line >= sx_nports))
return -ENODEV;
- port = & sx_ports[line];
+ port = &sx_ports[line];
port->c_dcd = 0; /* Make sure that the first interrupt doesn't detect a
- 1 -> 0 transition. */
+ 1 -> 0 transition. */
-
- sx_dprintk (SX_DEBUG_OPEN, "port = %p c_dcd = %d\n", port, port->c_dcd);
+ sx_dprintk(SX_DEBUG_OPEN, "port = %p c_dcd = %d\n", port, port->c_dcd);
spin_lock_irqsave(&port->gs.driver_lock, flags);
port->gs.count++;
spin_unlock_irqrestore(&port->gs.driver_lock, flags);
- sx_dprintk (SX_DEBUG_OPEN, "starting port\n");
+ sx_dprintk(SX_DEBUG_OPEN, "starting port\n");
/*
* Start up serial port
*/
retval = gs_init_port(&port->gs);
- sx_dprintk (SX_DEBUG_OPEN, "done gs_init\n");
+ sx_dprintk(SX_DEBUG_OPEN, "done gs_init\n");
if (retval) {
port->gs.count--;
return retval;
port->gs.flags |= GS_ACTIVE;
if (port->gs.count <= 1)
- sx_setsignals (port, 1,1);
+ sx_setsignals(port, 1, 1);
#if 0
if (sx_debug & SX_DEBUG_OPEN)
- my_hd (port, sizeof (*port));
+ my_hd(port, sizeof(*port));
#else
if (sx_debug & SX_DEBUG_OPEN)
- my_hd_io (port->board->base + port->ch_base, sizeof (*port));
+ my_hd_io(port->board->base + port->ch_base, sizeof(*port));
#endif
if (port->gs.count <= 1) {
- if (sx_send_command (port, HS_LOPEN, -1, HS_IDLE_OPEN) != 1) {
- printk (KERN_ERR "sx: Card didn't respond to LOPEN command.\n");
+ if (sx_send_command(port, HS_LOPEN, -1, HS_IDLE_OPEN) != 1) {
+ printk(KERN_ERR "sx: Card didn't respond to LOPEN "
+ "command.\n");
spin_lock_irqsave(&port->gs.driver_lock, flags);
port->gs.count--;
spin_unlock_irqrestore(&port->gs.driver_lock, flags);
}
retval = gs_block_til_ready(port, filp);
- sx_dprintk (SX_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n",
- retval, port->gs.count);
+ sx_dprintk(SX_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n",
+ retval, port->gs.count);
if (retval) {
- /*
- * Don't lower gs.count here because sx_close() will be called later
- */
+/*
+ * Don't lower gs.count here because sx_close() will be called later
+ */
return retval;
}
/* tty->low_latency = 1; */
- port->c_dcd = sx_get_CD (port);
- sx_dprintk (SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd);
+ port->c_dcd = sx_get_CD(port);
+ sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd);
func_exit();
return 0;
}
-
-static void sx_close (void *ptr)
+static void sx_close(void *ptr)
{
- struct sx_port *port = ptr;
+ struct sx_port *port = ptr;
/* Give the port 5 seconds to close down. */
- int to = 5 * HZ;
+ int to = 5 * HZ;
- func_enter ();
+ func_enter();
- sx_setsignals (port, 0, 0);
- sx_reconfigure_port(port);
- sx_send_command (port, HS_CLOSE, 0, 0);
+ sx_setsignals(port, 0, 0);
+ sx_reconfigure_port(port);
+ sx_send_command(port, HS_CLOSE, 0, 0);
- while (to-- && (sx_read_channel_byte (port, hi_hstat) != HS_IDLE_CLOSED))
+ while (to-- && (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED))
if (msleep_interruptible(10))
break;
- if (sx_read_channel_byte (port, hi_hstat) != HS_IDLE_CLOSED) {
- if (sx_send_command (port, HS_FORCE_CLOSED, -1, HS_IDLE_CLOSED) != 1) {
- printk (KERN_ERR
- "sx: sent the force_close command, but card didn't react\n");
+ if (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) {
+ if (sx_send_command(port, HS_FORCE_CLOSED, -1, HS_IDLE_CLOSED)
+ != 1) {
+ printk(KERN_ERR "sx: sent the force_close command, but "
+ "card didn't react\n");
} else
- sx_dprintk (SX_DEBUG_CLOSE, "sent the force_close command.\n");
+ sx_dprintk(SX_DEBUG_CLOSE, "sent the force_close "
+ "command.\n");
}
- sx_dprintk (SX_DEBUG_CLOSE, "waited %d jiffies for close. count=%d\n",
- 5 * HZ - to - 1, port->gs.count);
+ sx_dprintk(SX_DEBUG_CLOSE, "waited %d jiffies for close. count=%d\n",
+ 5 * HZ - to - 1, port->gs.count);
- if(port->gs.count) {
- sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n", port->gs.count);
- //printk ("%s SETTING port count to zero: %p count: %d\n", __FUNCTION__, port, port->gs.count);
- //port->gs.count = 0;
+ if (port->gs.count) {
+ sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n",
+ port->gs.count);
+ /*printk("%s SETTING port count to zero: %p count: %d\n",
+ __FUNCTION__, port, port->gs.count);
+ port->gs.count = 0;*/
}
- func_exit ();
+ func_exit();
}
-
-
/* This is relatively thorough. But then again it is only 20 lines. */
-#define MARCHUP for (i=min;i<max;i++)
-#define MARCHDOWN for (i=max-1;i>=min;i--)
-#define W0 write_sx_byte (board, i, 0x55)
-#define W1 write_sx_byte (board, i, 0xaa)
-#define R0 if (read_sx_byte (board, i) != 0x55) return 1
-#define R1 if (read_sx_byte (board, i) != 0xaa) return 1
+#define MARCHUP for (i = min; i < max; i++)
+#define MARCHDOWN for (i = max - 1; i >= min; i--)
+#define W0 write_sx_byte(board, i, 0x55)
+#define W1 write_sx_byte(board, i, 0xaa)
+#define R0 if (read_sx_byte(board, i) != 0x55) return 1
+#define R1 if (read_sx_byte(board, i) != 0xaa) return 1
/* This memtest takes a human-noticable time. You normally only do it
once a boot, so I guess that it is worth it. */
-static int do_memtest (struct sx_board *board, int min, int max)
+static int do_memtest(struct sx_board *board, int min, int max)
{
int i;
intermittent errors. -- REW
(For the theory behind memory testing see:
Testing Semiconductor Memories by A.J. van de Goor.) */
- MARCHUP {W0;}
- MARCHUP {R0;W1;R1;W0;R0;W1;}
- MARCHUP {R1;W0;W1;}
- MARCHDOWN {R1;W0;W1;W0;}
- MARCHDOWN {R0;W1;W0;}
+ MARCHUP {
+ W0;
+ }
+ MARCHUP {
+ R0;
+ W1;
+ R1;
+ W0;
+ R0;
+ W1;
+ }
+ MARCHUP {
+ R1;
+ W0;
+ W1;
+ }
+ MARCHDOWN {
+ R1;
+ W0;
+ W1;
+ W0;
+ }
+ MARCHDOWN {
+ R0;
+ W1;
+ W0;
+ }
return 0;
}
-
#undef MARCHUP
#undef MARCHDOWN
#undef W0
#undef R0
#undef R1
-#define MARCHUP for (i=min;i<max;i+=2)
-#define MARCHDOWN for (i=max-1;i>=min;i-=2)
-#define W0 write_sx_word (board, i, 0x55aa)
-#define W1 write_sx_word (board, i, 0xaa55)
-#define R0 if (read_sx_word (board, i) != 0x55aa) return 1
-#define R1 if (read_sx_word (board, i) != 0xaa55) return 1
+#define MARCHUP for (i = min; i < max; i += 2)
+#define MARCHDOWN for (i = max - 1; i >= min; i -= 2)
+#define W0 write_sx_word(board, i, 0x55aa)
+#define W1 write_sx_word(board, i, 0xaa55)
+#define R0 if (read_sx_word(board, i) != 0x55aa) return 1
+#define R1 if (read_sx_word(board, i) != 0xaa55) return 1
#if 0
/* This memtest takes a human-noticable time. You normally only do it
once a boot, so I guess that it is worth it. */
-static int do_memtest_w (struct sx_board *board, int min, int max)
+static int do_memtest_w(struct sx_board *board, int min, int max)
{
int i;
- MARCHUP {W0;}
- MARCHUP {R0;W1;R1;W0;R0;W1;}
- MARCHUP {R1;W0;W1;}
- MARCHDOWN {R1;W0;W1;W0;}
- MARCHDOWN {R0;W1;W0;}
+ MARCHUP {
+ W0;
+ }
+ MARCHUP {
+ R0;
+ W1;
+ R1;
+ W0;
+ R0;
+ W1;
+ }
+ MARCHUP {
+ R1;
+ W0;
+ W1;
+ }
+ MARCHDOWN {
+ R1;
+ W0;
+ W1;
+ W0;
+ }
+ MARCHDOWN {
+ R0;
+ W1;
+ W0;
+ }
return 0;
}
#endif
-
-static int sx_fw_ioctl (struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
+static int sx_fw_ioctl(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
{
int rc = 0;
int __user *descr = (int __user *)arg;
func_enter();
-#if 0
+#if 0
/* Removed superuser check: Sysops can use the permissions on the device
file to restrict access. Recommendation: Root only. (root.root 600) */
if (!capable(CAP_SYS_ADMIN)) {
}
#endif
- sx_dprintk (SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg);
+ sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg);
- if (!board) board = &boards[0];
+ if (!board)
+ board = &boards[0];
if (board->flags & SX_BOARD_PRESENT) {
- sx_dprintk (SX_DEBUG_FIRMWARE, "Board present! (%x)\n",
- board->flags);
+ sx_dprintk(SX_DEBUG_FIRMWARE, "Board present! (%x)\n",
+ board->flags);
} else {
- sx_dprintk (SX_DEBUG_FIRMWARE, "Board not present! (%x) all:",
- board->flags);
- for (i=0;i< SX_NBOARDS;i++)
- sx_dprintk (SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
- sx_dprintk (SX_DEBUG_FIRMWARE, "\n");
+ sx_dprintk(SX_DEBUG_FIRMWARE, "Board not present! (%x) all:",
+ board->flags);
+ for (i = 0; i < SX_NBOARDS; i++)
+ sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
+ sx_dprintk(SX_DEBUG_FIRMWARE, "\n");
return -EIO;
}
switch (cmd) {
case SXIO_SET_BOARD:
- sx_dprintk (SX_DEBUG_FIRMWARE, "set board to %ld\n", arg);
- if (arg >= SX_NBOARDS) return -EIO;
- sx_dprintk (SX_DEBUG_FIRMWARE, "not out of range\n");
- if (!(boards[arg].flags & SX_BOARD_PRESENT)) return -EIO;
- sx_dprintk (SX_DEBUG_FIRMWARE, ".. and present!\n");
+ sx_dprintk(SX_DEBUG_FIRMWARE, "set board to %ld\n", arg);
+ if (arg >= SX_NBOARDS)
+ return -EIO;
+ sx_dprintk(SX_DEBUG_FIRMWARE, "not out of range\n");
+ if (!(boards[arg].flags & SX_BOARD_PRESENT))
+ return -EIO;
+ sx_dprintk(SX_DEBUG_FIRMWARE, ".. and present!\n");
board = &boards[arg];
break;
case SXIO_GET_TYPE:
- rc = -ENOENT; /* If we manage to miss one, return error. */
- if (IS_SX_BOARD (board)) rc = SX_TYPE_SX;
- if (IS_CF_BOARD (board)) rc = SX_TYPE_CF;
- if (IS_SI_BOARD (board)) rc = SX_TYPE_SI;
- if (IS_SI1_BOARD (board)) rc = SX_TYPE_SI;
- if (IS_EISA_BOARD (board)) rc = SX_TYPE_SI;
- sx_dprintk (SX_DEBUG_FIRMWARE, "returning type= %d\n", rc);
+ rc = -ENOENT; /* If we manage to miss one, return error. */
+ if (IS_SX_BOARD(board))
+ rc = SX_TYPE_SX;
+ if (IS_CF_BOARD(board))
+ rc = SX_TYPE_CF;
+ if (IS_SI_BOARD(board))
+ rc = SX_TYPE_SI;
+ if (IS_SI1_BOARD(board))
+ rc = SX_TYPE_SI;
+ if (IS_EISA_BOARD(board))
+ rc = SX_TYPE_SI;
+ sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %d\n", rc);
break;
case SXIO_DO_RAMTEST:
- if (sx_initialized) /* Already initialized: better not ramtest the board. */
+ if (sx_initialized) /* Already initialized: better not ramtest the board. */
return -EPERM;
- if (IS_SX_BOARD (board)) {
- rc = do_memtest (board, 0, 0x7000);
- if (!rc) rc = do_memtest (board, 0, 0x7000);
- /*if (!rc) rc = do_memtest_w (board, 0, 0x7000);*/
+ if (IS_SX_BOARD(board)) {
+ rc = do_memtest(board, 0, 0x7000);
+ if (!rc)
+ rc = do_memtest(board, 0, 0x7000);
+ /*if (!rc) rc = do_memtest_w (board, 0, 0x7000); */
} else {
- rc = do_memtest (board, 0, 0x7ff8);
+ rc = do_memtest(board, 0, 0x7ff8);
/* if (!rc) rc = do_memtest_w (board, 0, 0x7ff8); */
}
- sx_dprintk (SX_DEBUG_FIRMWARE, "returning memtest result= %d\n", rc);
+ sx_dprintk(SX_DEBUG_FIRMWARE, "returning memtest result= %d\n",
+ rc);
break;
case SXIO_DOWNLOAD:
- if (sx_initialized) /* Already initialized */
+ if (sx_initialized) /* Already initialized */
return -EEXIST;
- if (!sx_reset (board))
+ if (!sx_reset(board))
return -EIO;
- sx_dprintk (SX_DEBUG_INIT, "reset the board...\n");
-
- tmp = kmalloc (SX_CHUNK_SIZE, GFP_USER);
- if (!tmp) return -ENOMEM;
- get_user (nbytes, descr++);
- get_user (offset, descr++);
- get_user (data, descr++);
+ sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
+
+ tmp = kmalloc(SX_CHUNK_SIZE, GFP_USER);
+ if (!tmp)
+ return -ENOMEM;
+ get_user(nbytes, descr++);
+ get_user(offset, descr++);
+ get_user(data, descr++);
while (nbytes && data) {
- for (i=0;i<nbytes;i += SX_CHUNK_SIZE) {
- if (copy_from_user(tmp, (char __user *)data+i,
- (i + SX_CHUNK_SIZE >
- nbytes) ? nbytes - i :
- SX_CHUNK_SIZE)) {
- kfree (tmp);
+ for (i = 0; i < nbytes; i += SX_CHUNK_SIZE) {
+ if (copy_from_user(tmp, (char __user *)data + i,
+ (i + SX_CHUNK_SIZE > nbytes) ?
+ nbytes - i : SX_CHUNK_SIZE)) {
+ kfree(tmp);
return -EFAULT;
}
- memcpy_toio(board->base2 + offset + i, tmp,
- (i+SX_CHUNK_SIZE>nbytes)?nbytes-i:SX_CHUNK_SIZE);
+ memcpy_toio(board->base2 + offset + i, tmp,
+ (i + SX_CHUNK_SIZE > nbytes) ?
+ nbytes - i : SX_CHUNK_SIZE);
}
- get_user (nbytes, descr++);
- get_user (offset, descr++);
- get_user (data, descr++);
+ get_user(nbytes, descr++);
+ get_user(offset, descr++);
+ get_user(data, descr++);
}
- kfree (tmp);
- sx_nports += sx_init_board (board);
+ kfree(tmp);
+ sx_nports += sx_init_board(board);
rc = sx_nports;
break;
case SXIO_INIT:
- if (sx_initialized) /* Already initialized */
+ if (sx_initialized) /* Already initialized */
return -EEXIST;
/* This is not allowed until all boards are initialized... */
- for (i=0;i<SX_NBOARDS;i++) {
- if ( (boards[i].flags & SX_BOARD_PRESENT) &&
- !(boards[i].flags & SX_BOARD_INITIALIZED))
+ for (i = 0; i < SX_NBOARDS; i++) {
+ if ((boards[i].flags & SX_BOARD_PRESENT) &&
+ !(boards[i].flags & SX_BOARD_INITIALIZED))
return -EIO;
}
- for (i=0;i<SX_NBOARDS;i++)
- if (!(boards[i].flags & SX_BOARD_PRESENT)) break;
-
- sx_dprintk (SX_DEBUG_FIRMWARE, "initing portstructs, %d boards, "
- "%d channels, first board: %d ports\n",
- i, sx_nports, boards[0].nports);
- rc = sx_init_portstructs (i, sx_nports);
- sx_init_drivers ();
- if (rc >= 0)
+ for (i = 0; i < SX_NBOARDS; i++)
+ if (!(boards[i].flags & SX_BOARD_PRESENT))
+ break;
+
+ sx_dprintk(SX_DEBUG_FIRMWARE, "initing portstructs, %d boards, "
+ "%d channels, first board: %d ports\n",
+ i, sx_nports, boards[0].nports);
+ rc = sx_init_portstructs(i, sx_nports);
+ sx_init_drivers();
+ if (rc >= 0)
sx_initialized++;
break;
case SXIO_SETDEBUG:
rc = sx_nports;
break;
default:
- printk (KERN_WARNING "Unknown ioctl on firmware device (%x).\n", cmd);
+ printk(KERN_WARNING "Unknown ioctl on firmware device (%x).\n",
+ cmd);
break;
}
- func_exit ();
+ func_exit();
return rc;
}
-
-static void sx_break (struct tty_struct * tty, int flag)
+static void sx_break(struct tty_struct *tty, int flag)
{
struct sx_port *port = tty->driver_data;
int rv;
- func_enter ();
+ func_enter();
- if (flag)
- rv = sx_send_command (port, HS_START, -1, HS_IDLE_BREAK);
- else
- rv = sx_send_command (port, HS_STOP, -1, HS_IDLE_OPEN);
- if (rv != 1) printk (KERN_ERR "sx: couldn't send break (%x).\n",
- read_sx_byte (port->board, CHAN_OFFSET (port, hi_hstat)));
+ if (flag)
+ rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK);
+ else
+ rv = sx_send_command(port, HS_STOP, -1, HS_IDLE_OPEN);
+ if (rv != 1)
+ printk(KERN_ERR "sx: couldn't send break (%x).\n",
+ read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat)));
- func_exit ();
+ func_exit();
}
-
static int sx_tiocmget(struct tty_struct *tty, struct file *file)
{
struct sx_port *port = tty->driver_data;
}
static int sx_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+ unsigned int set, unsigned int clear)
{
struct sx_port *port = tty->driver_data;
int rts = -1, dtr = -1;
return 0;
}
-static int sx_ioctl (struct tty_struct * tty, struct file * filp,
- unsigned int cmd, unsigned long arg)
+static int sx_ioctl(struct tty_struct *tty, struct file *filp,
+ unsigned int cmd, unsigned long arg)
{
int rc;
struct sx_port *port = tty->driver_data;
switch (cmd) {
case TIOCGSOFTCAR:
rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
- (unsigned __user *) argp);
+ (unsigned __user *)argp);
break;
case TIOCSSOFTCAR:
- if ((rc = get_user(ival, (unsigned __user *) argp)) == 0) {
+ if ((rc = get_user(ival, (unsigned __user *)argp)) == 0) {
tty->termios->c_cflag =
(tty->termios->c_cflag & ~CLOCAL) |
(ival ? CLOCAL : 0);
return rc;
}
-
/* The throttle/unthrottle scheme for the Specialix card is different
* from other drivers and deserves some explanation.
* The Specialix hardware takes care of XON/XOFF
* flow control scheme is in use for that port. -- Simon Allen
*/
-static void sx_throttle (struct tty_struct * tty)
+static void sx_throttle(struct tty_struct *tty)
{
struct sx_port *port = (struct sx_port *)tty->driver_data;
/* If the port is using any type of input flow
* control then throttle the port.
*/
- if((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty)) ) {
+ if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) {
port->gs.flags |= SX_RX_THROTTLE;
}
func_exit();
}
-
-static void sx_unthrottle (struct tty_struct * tty)
+static void sx_unthrottle(struct tty_struct *tty)
{
struct sx_port *port = (struct sx_port *)tty->driver_data;
return;
}
-
/* ********************************************************************** *
* Here are the initialization routines. *
* ********************************************************************** */
-
-
-
-static int sx_init_board (struct sx_board *board)
+static int sx_init_board(struct sx_board *board)
{
int addr;
int chans;
board->flags |= SX_BOARD_INITIALIZED;
- if (read_sx_byte (board, 0))
+ if (read_sx_byte(board, 0))
/* CF boards may need this. */
- write_sx_byte(board,0, 0);
+ write_sx_byte(board, 0, 0);
/* This resets the processor again, to make sure it didn't do any
foolish things while we were downloading the image */
- if (!sx_reset (board))
+ if (!sx_reset(board))
return 0;
- sx_start_board (board);
- udelay (10);
- if (!sx_busy_wait_neq (board, 0, 0xff, 0)) {
- printk (KERN_ERR "sx: Ooops. Board won't initialize.\n");
+ sx_start_board(board);
+ udelay(10);
+ if (!sx_busy_wait_neq(board, 0, 0xff, 0)) {
+ printk(KERN_ERR "sx: Ooops. Board won't initialize.\n");
return 0;
}
/* Ok. So now the processor on the card is running. It gathered
some info for us... */
- sx_dprintk (SX_DEBUG_INIT, "The sxcard structure:\n");
- if (sx_debug & SX_DEBUG_INIT) my_hd_io (board->base, 0x10);
- sx_dprintk (SX_DEBUG_INIT, "the first sx_module structure:\n");
- if (sx_debug & SX_DEBUG_INIT) my_hd_io (board->base + 0x80, 0x30);
-
- sx_dprintk (SX_DEBUG_INIT,
- "init_status: %x, %dk memory, firmware V%x.%02x,\n",
- read_sx_byte (board, 0), read_sx_byte(board, 1),
- read_sx_byte (board, 5), read_sx_byte(board, 4));
-
- if (read_sx_byte (board, 0) == 0xff) {
- printk (KERN_INFO "sx: No modules found. Sorry.\n");
+ sx_dprintk(SX_DEBUG_INIT, "The sxcard structure:\n");
+ if (sx_debug & SX_DEBUG_INIT)
+ my_hd_io(board->base, 0x10);
+ sx_dprintk(SX_DEBUG_INIT, "the first sx_module structure:\n");
+ if (sx_debug & SX_DEBUG_INIT)
+ my_hd_io(board->base + 0x80, 0x30);
+
+ sx_dprintk(SX_DEBUG_INIT, "init_status: %x, %dk memory, firmware "
+ "V%x.%02x,\n",
+ read_sx_byte(board, 0), read_sx_byte(board, 1),
+ read_sx_byte(board, 5), read_sx_byte(board, 4));
+
+ if (read_sx_byte(board, 0) == 0xff) {
+ printk(KERN_INFO "sx: No modules found. Sorry.\n");
board->nports = 0;
return 0;
}
chans = 0;
if (IS_SX_BOARD(board)) {
- sx_write_board_word (board, cc_int_count, sx_maxints);
+ sx_write_board_word(board, cc_int_count, sx_maxints);
} else {
if (sx_maxints)
- sx_write_board_word (board, cc_int_count, SI_PROCESSOR_CLOCK/8/sx_maxints);
+ sx_write_board_word(board, cc_int_count,
+ SI_PROCESSOR_CLOCK / 8 / sx_maxints);
}
/* grab the first module type... */
- /* board->ta_type = mod_compat_type (read_sx_byte (board, 0x80 + 0x08)); */
- board->ta_type = mod_compat_type (sx_read_module_byte (board, 0x80, mc_chip));
+ /* board->ta_type = mod_compat_type (read_sx_byte (board, 0x80 + 0x08)); */
+ board->ta_type = mod_compat_type(sx_read_module_byte(board, 0x80,
+ mc_chip));
/* XXX byteorder */
- for (addr = 0x80;addr != 0;addr = read_sx_word (board, addr) & 0x7fff) {
- type = sx_read_module_byte (board, addr, mc_chip);
- sx_dprintk (SX_DEBUG_INIT, "Module at %x: %d channels\n",
- addr, read_sx_byte (board, addr + 2));
-
- chans += sx_read_module_byte (board, addr, mc_type);
-
- sx_dprintk (SX_DEBUG_INIT, "module is an %s, which has %s/%s panels\n",
- mod_type_s (type),
- pan_type_s (sx_read_module_byte (board, addr, mc_mods) & 0xf),
- pan_type_s (sx_read_module_byte (board, addr, mc_mods) >> 4));
-
- sx_dprintk (SX_DEBUG_INIT, "CD1400 versions: %x/%x, ASIC version: %x\n",
- sx_read_module_byte (board, addr, mc_rev1),
- sx_read_module_byte (board, addr, mc_rev2),
- sx_read_module_byte (board, addr, mc_mtaasic_rev));
+ for (addr = 0x80; addr != 0; addr = read_sx_word(board, addr) & 0x7fff){
+ type = sx_read_module_byte(board, addr, mc_chip);
+ sx_dprintk(SX_DEBUG_INIT, "Module at %x: %d channels\n",
+ addr, read_sx_byte(board, addr + 2));
+
+ chans += sx_read_module_byte(board, addr, mc_type);
+
+ sx_dprintk(SX_DEBUG_INIT, "module is an %s, which has %s/%s "
+ "panels\n",
+ mod_type_s(type),
+ pan_type_s(sx_read_module_byte(board, addr,
+ mc_mods) & 0xf),
+ pan_type_s(sx_read_module_byte(board, addr,
+ mc_mods) >> 4));
+
+ sx_dprintk(SX_DEBUG_INIT, "CD1400 versions: %x/%x, ASIC "
+ "version: %x\n",
+ sx_read_module_byte(board, addr, mc_rev1),
+ sx_read_module_byte(board, addr, mc_rev2),
+ sx_read_module_byte(board, addr, mc_mtaasic_rev));
/* The following combinations are illegal: It should theoretically
work, but timing problems make the bus HANG. */
- if (mod_compat_type (type) != board->ta_type) {
- printk (KERN_ERR "sx: This is an invalid configuration.\n"
- "Don't mix TA/MTA/SXDC on the same hostadapter.\n");
- chans=0;
+ if (mod_compat_type(type) != board->ta_type) {
+ printk(KERN_ERR "sx: This is an invalid "
+ "configuration.\nDon't mix TA/MTA/SXDC on the "
+ "same hostadapter.\n");
+ chans = 0;
break;
}
- if ((IS_EISA_BOARD(board) ||
- IS_SI_BOARD(board)) && (mod_compat_type(type) == 4)) {
- printk (KERN_ERR "sx: This is an invalid configuration.\n"
- "Don't use SXDCs on an SI/XIO adapter.\n");
- chans=0;
+ if ((IS_EISA_BOARD(board) ||
+ IS_SI_BOARD(board)) &&
+ (mod_compat_type(type) == 4)) {
+ printk(KERN_ERR "sx: This is an invalid "
+ "configuration.\nDon't use SXDCs on an SI/XIO "
+ "adapter.\n");
+ chans = 0;
break;
}
-#if 0 /* Problem fixed: firmware 3.05 */
+#if 0 /* Problem fixed: firmware 3.05 */
if (IS_SX_BOARD(board) && (type == TA8)) {
/* There are some issues with the firmware and the DCD/RTS
lines. It might work if you tie them together or something.
- It might also work if you get a newer sx_firmware. Therefore
+ It might also work if you get a newer sx_firmware. Therefore
this is just a warning. */
- printk (KERN_WARNING "sx: The SX host doesn't work too well "
- "with the TA8 adapters.\nSpecialix is working on it.\n");
+ printk(KERN_WARNING
+ "sx: The SX host doesn't work too well "
+ "with the TA8 adapters.\nSpecialix is working on it.\n");
}
#endif
}
if (chans) {
- /* board->flags |= SX_BOARD_PRESENT; */
- if(board->irq > 0) {
+ if (board->irq > 0) {
/* fixed irq, probably PCI */
- if(sx_irqmask & (1 << board->irq)) { /* may we use this irq? */
- if(request_irq(board->irq, sx_interrupt, IRQF_SHARED | IRQF_DISABLED, "sx", board)) {
- printk(KERN_ERR "sx: Cannot allocate irq %d.\n", board->irq);
+ if (sx_irqmask & (1 << board->irq)) { /* may we use this irq? */
+ if (request_irq(board->irq, sx_interrupt,
+ IRQF_SHARED | IRQF_DISABLED,
+ "sx", board)) {
+ printk(KERN_ERR "sx: Cannot allocate "
+ "irq %d.\n", board->irq);
board->irq = 0;
}
} else
board->irq = 0;
- } else if(board->irq < 0 && sx_irqmask) {
+ } else if (board->irq < 0 && sx_irqmask) {
/* auto-allocate irq */
int irqnr;
- int irqmask = sx_irqmask & (IS_SX_BOARD(board) ? SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK);
- for(irqnr = 15; irqnr > 0; irqnr--)
- if(irqmask & (1 << irqnr))
- if(! request_irq(irqnr, sx_interrupt, IRQF_SHARED | IRQF_DISABLED, "sx", board))
+ int irqmask = sx_irqmask & (IS_SX_BOARD(board) ?
+ SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK);
+ for (irqnr = 15; irqnr > 0; irqnr--)
+ if (irqmask & (1 << irqnr))
+ if (!request_irq(irqnr, sx_interrupt,
+ IRQF_SHARED | IRQF_DISABLED,
+ "sx", board))
break;
- if(! irqnr)
+ if (!irqnr)
printk(KERN_ERR "sx: Cannot allocate IRQ.\n");
board->irq = irqnr;
} else
if (board->irq) {
/* Found a valid interrupt, start up interrupts! */
- sx_dprintk (SX_DEBUG_INIT, "Using irq %d.\n", board->irq);
- sx_start_interrupts (board);
+ sx_dprintk(SX_DEBUG_INIT, "Using irq %d.\n",
+ board->irq);
+ sx_start_interrupts(board);
board->poll = sx_slowpoll;
board->flags |= SX_IRQ_ALLOCATED;
} else {
/* no irq: setup board for polled operation */
board->poll = sx_poll;
- sx_dprintk (SX_DEBUG_INIT, "Using poll-interval %d.\n", board->poll);
+ sx_dprintk(SX_DEBUG_INIT, "Using poll-interval %d.\n",
+ board->poll);
}
- /* The timer should be initialized anyway: That way we can safely
- del_timer it when the module is unloaded. */
- init_timer (&board->timer);
+ /* The timer should be initialized anyway: That way we can
+ safely del_timer it when the module is unloaded. */
+ setup_timer(&board->timer, sx_pollfunc, (unsigned long)board);
- if (board->poll) {
- board->timer.data = (unsigned long) board;
- board->timer.function = sx_pollfunc;
- board->timer.expires = jiffies + board->poll;
- add_timer (&board->timer);
- }
+ if (board->poll)
+ mod_timer(&board->timer, jiffies + board->poll);
} else {
board->irq = 0;
}
board->nports = chans;
- sx_dprintk (SX_DEBUG_INIT, "returning %d ports.", board->nports);
+ sx_dprintk(SX_DEBUG_INIT, "returning %d ports.", board->nports);
func_exit();
return chans;
}
-
-static void printheader(void)
+static void __devinit printheader(void)
{
static int header_printed;
if (!header_printed) {
- printk (KERN_INFO "Specialix SX driver "
- "(C) 1998/1999 R.E.Wolff@BitWizard.nl \n");
- printk (KERN_INFO "sx: version %s\n", RCS_ID);
+ printk(KERN_INFO "Specialix SX driver "
+ "(C) 1998/1999 R.E.Wolff@BitWizard.nl\n");
+ printk(KERN_INFO "sx: version " __stringify(SX_VERSION) "\n");
header_printed = 1;
}
}
-
-static int probe_sx (struct sx_board *board)
+static int __devinit probe_sx(struct sx_board *board)
{
struct vpd_prom vpdp;
char *p;
func_enter();
- if (!IS_CF_BOARD (board)) {
- sx_dprintk (SX_DEBUG_PROBE, "Going to verify vpd prom at %p.\n",
- board->base + SX_VPD_ROM);
+ if (!IS_CF_BOARD(board)) {
+ sx_dprintk(SX_DEBUG_PROBE, "Going to verify vpd prom at %p.\n",
+ board->base + SX_VPD_ROM);
if (sx_debug & SX_DEBUG_PROBE)
my_hd_io(board->base + SX_VPD_ROM, 0x40);
- p = (char *) &vpdp;
- for (i=0;i< sizeof (struct vpd_prom);i++)
- *p++ = read_sx_byte (board, SX_VPD_ROM + i*2);
+ p = (char *)&vpdp;
+ for (i = 0; i < sizeof(struct vpd_prom); i++)
+ *p++ = read_sx_byte(board, SX_VPD_ROM + i * 2);
if (sx_debug & SX_DEBUG_PROBE)
- my_hd (&vpdp, 0x20);
+ my_hd(&vpdp, 0x20);
- sx_dprintk (SX_DEBUG_PROBE, "checking identifier...\n");
+ sx_dprintk(SX_DEBUG_PROBE, "checking identifier...\n");
- if (strncmp (vpdp.identifier, SX_VPD_IDENT_STRING, 16) != 0) {
- sx_dprintk (SX_DEBUG_PROBE, "Got non-SX identifier: '%s'\n",
- vpdp.identifier);
+ if (strncmp(vpdp.identifier, SX_VPD_IDENT_STRING, 16) != 0) {
+ sx_dprintk(SX_DEBUG_PROBE, "Got non-SX identifier: "
+ "'%s'\n", vpdp.identifier);
return 0;
}
}
- printheader ();
-
- if (!IS_CF_BOARD (board)) {
- printk (KERN_DEBUG "sx: Found an SX board at %lx\n", board->hw_base);
- printk (KERN_DEBUG "sx: hw_rev: %d, assembly level: %d, uniq ID:%08x, ",
- vpdp.hwrev, vpdp.hwass, vpdp.uniqid);
- printk ( "Manufactured: %d/%d\n",
- 1970 + vpdp.myear, vpdp.mweek);
+ printheader();
+ if (!IS_CF_BOARD(board)) {
+ printk(KERN_DEBUG "sx: Found an SX board at %lx\n",
+ board->hw_base);
+ printk(KERN_DEBUG "sx: hw_rev: %d, assembly level: %d, "
+ "uniq ID:%08x, ",
+ vpdp.hwrev, vpdp.hwass, vpdp.uniqid);
+ printk("Manufactured: %d/%d\n", 1970 + vpdp.myear, vpdp.mweek);
- if ((((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) != SX_PCI_UNIQUEID1) &&
- (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) != SX_ISA_UNIQUEID1)) {
- /* This might be a bit harsh. This was the primary reason the
- SX/ISA card didn't work at first... */
- printk (KERN_ERR "sx: Hmm. Not an SX/PCI or SX/ISA card. Sorry: giving up.\n");
+ if ((((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) !=
+ SX_PCI_UNIQUEID1) && (((vpdp.uniqid >> 24) &
+ SX_UNIQUEID_MASK) != SX_ISA_UNIQUEID1)) {
+ /* This might be a bit harsh. This was the primary
+ reason the SX/ISA card didn't work at first... */
+ printk(KERN_ERR "sx: Hmm. Not an SX/PCI or SX/ISA "
+ "card. Sorry: giving up.\n");
return (0);
}
- if (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) == SX_ISA_UNIQUEID1) {
+ if (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) ==
+ SX_ISA_UNIQUEID1) {
if (((unsigned long)board->hw_base) & 0x8000) {
- printk (KERN_WARNING "sx: Warning: There may be hardware problems with the card at %lx.\n", board->hw_base);
- printk (KERN_WARNING "sx: Read sx.txt for more info.\n");
+ printk(KERN_WARNING "sx: Warning: There may be "
+ "hardware problems with the card at "
+ "%lx.\n", board->hw_base);
+ printk(KERN_WARNING "sx: Read sx.txt for more "
+ "info.\n");
}
}
}
board->nports = -1;
/* This resets the processor, and keeps it off the bus. */
- if (!sx_reset (board))
+ if (!sx_reset(board))
return 0;
- sx_dprintk (SX_DEBUG_INIT, "reset the board...\n");
-
- board->flags |= SX_BOARD_PRESENT;
+ sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
func_exit();
return 1;
}
-
+#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
/* Specialix probes for this card at 32k increments from 640k to 16M.
I consider machines with less than 16M unlikely nowadays, so I'm
card. 0xe0000 and 0xf0000 are taken by the BIOS. That only leaves
0xc0000, 0xc8000, 0xd0000 and 0xd8000 . */
-static int probe_si (struct sx_board *board)
+static int __devinit probe_si(struct sx_board *board)
{
int i;
func_enter();
- sx_dprintk (SX_DEBUG_PROBE, "Going to verify SI signature hw %lx at %p.\n", board->hw_base,
- board->base + SI2_ISA_ID_BASE);
+ sx_dprintk(SX_DEBUG_PROBE, "Going to verify SI signature hw %lx at "
+ "%p.\n", board->hw_base, board->base + SI2_ISA_ID_BASE);
if (sx_debug & SX_DEBUG_PROBE)
my_hd_io(board->base + SI2_ISA_ID_BASE, 0x8);
if (!IS_EISA_BOARD(board)) {
- if( IS_SI1_BOARD(board) )
- {
- for (i=0;i<8;i++) {
- write_sx_byte (board, SI2_ISA_ID_BASE+7-i,i);
-
+ if (IS_SI1_BOARD(board)) {
+ for (i = 0; i < 8; i++) {
+ write_sx_byte(board, SI2_ISA_ID_BASE + 7 - i,i);
+ }
}
- }
- for (i=0;i<8;i++) {
- if ((read_sx_byte (board, SI2_ISA_ID_BASE+7-i) & 7) != i) {
- func_exit ();
+ for (i = 0; i < 8; i++) {
+ if ((read_sx_byte(board, SI2_ISA_ID_BASE + 7 - i) & 7)
+ != i) {
+ func_exit();
return 0;
}
}
but to prevent trouble, we'd better double check that we don't
have an SI1 board when we're probing for an SI2 board.... */
- write_sx_byte (board, SI2_ISA_ID_BASE,0x10);
- if ( IS_SI1_BOARD(board)) {
+ write_sx_byte(board, SI2_ISA_ID_BASE, 0x10);
+ if (IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
- func_exit ();
- return 0;
+ if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) {
+ func_exit();
+ return 0;
}
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
- func_exit ();
- return 0;
+ if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) {
+ func_exit();
+ return 0;
}
}
but to prevent trouble, we'd better double check that we don't
have an SI1 board when we're probing for an SI2 board.... */
- write_sx_byte (board, SI2_ISA_ID_BASE,0x10);
- if ( IS_SI1_BOARD(board)) {
+ write_sx_byte(board, SI2_ISA_ID_BASE, 0x10);
+ if (IS_SI1_BOARD(board)) {
/* This should be an SI1 board, which has this
location writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
+ if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) {
func_exit();
- return 0;
+ return 0;
}
} else {
/* This should be an SI2 board, which has the bottom
3 bits non-writable... */
- if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
- func_exit ();
- return 0;
+ if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) {
+ func_exit();
+ return 0;
}
}
- printheader ();
+ printheader();
- printk (KERN_DEBUG "sx: Found an SI board at %lx\n", board->hw_base);
+ printk(KERN_DEBUG "sx: Found an SI board at %lx\n", board->hw_base);
/* Compared to the SX boards, it is a complete guess as to what
- this card is up to... */
+ this card is up to... */
board->nports = -1;
/* This resets the processor, and keeps it off the bus. */
- if (!sx_reset (board))
+ if (!sx_reset(board))
return 0;
- sx_dprintk (SX_DEBUG_INIT, "reset the board...\n");
-
- board->flags |= SX_BOARD_PRESENT;
+ sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
func_exit();
return 1;
}
+#endif
static const struct tty_operations sx_ops = {
.break_ctl = sx_break,
- .open = sx_open,
+ .open = sx_open,
.close = gs_close,
.write = gs_write,
.put_char = gs_put_char,
sx_driver->type = TTY_DRIVER_TYPE_SERIAL;
sx_driver->subtype = SERIAL_TYPE_NORMAL;
sx_driver->init_termios = tty_std_termios;
- sx_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ sx_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ sx_driver->init_termios.c_ispeed = 9600;
+ sx_driver->init_termios.c_ospeed = 9600;
sx_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(sx_driver, &sx_ops);
if ((error = tty_register_driver(sx_driver))) {
put_tty_driver(sx_driver);
printk(KERN_ERR "sx: Couldn't register sx driver, error = %d\n",
- error);
+ error);
return 1;
}
func_exit();
return 0;
}
-
-static void * ckmalloc (int size)
-{
- void *p;
-
- p = kmalloc(size, GFP_KERNEL);
- if (p)
- memset(p, 0, size);
- return p;
-}
-
-
-static int sx_init_portstructs (int nboards, int nports)
+static int sx_init_portstructs(int nboards, int nports)
{
struct sx_board *board;
struct sx_port *port;
func_enter();
/* Many drivers statically allocate the maximum number of ports
- There is no reason not to allocate them dynamically. Is there? -- REW */
- sx_ports = ckmalloc(nports * sizeof (struct sx_port));
+ There is no reason not to allocate them dynamically.
+ Is there? -- REW */
+ sx_ports = kcalloc(nports, sizeof(struct sx_port), GFP_KERNEL);
if (!sx_ports)
return -ENOMEM;
for (i = 0; i < nboards; i++) {
board = &boards[i];
board->ports = port;
- for (j=0; j < boards[i].nports;j++) {
- sx_dprintk (SX_DEBUG_INIT, "initing port %d\n", j);
+ for (j = 0; j < boards[i].nports; j++) {
+ sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j);
port->gs.magic = SX_MAGIC;
- port->gs.close_delay = HZ/2;
+ port->gs.close_delay = HZ / 2;
port->gs.closing_wait = 30 * HZ;
port->board = board;
port->gs.rd = &sx_real_driver;
* Initializing wait queue
*/
init_waitqueue_head(&port->gs.open_wait);
- init_waitqueue_head(&port->gs.close_wait);
-
+ init_waitqueue_head(&port->gs.close_wait);
+
port++;
}
}
board = &boards[i];
board->port_base = portno;
/* Possibly the configuration was rejected. */
- sx_dprintk (SX_DEBUG_PROBE, "Board has %d channels\n", board->nports);
- if (board->nports <= 0) continue;
+ sx_dprintk(SX_DEBUG_PROBE, "Board has %d channels\n",
+ board->nports);
+ if (board->nports <= 0)
+ continue;
/* XXX byteorder ?? */
- for (addr = 0x80;addr != 0;addr = read_sx_word (board, addr) & 0x7fff) {
- chans = sx_read_module_byte (board, addr, mc_type);
- sx_dprintk (SX_DEBUG_PROBE, "Module at %x: %d channels\n", addr, chans);
- sx_dprintk (SX_DEBUG_PROBE, "Port at");
- for (j=0;j<chans;j++) {
- /* The "sx-way" is the way it SHOULD be done. That way in the
- future, the firmware may for example pack the structures a bit
- more efficient. Neil tells me it isn't going to happen anytime
- soon though. */
+ for (addr = 0x80; addr != 0;
+ addr = read_sx_word(board, addr) & 0x7fff) {
+ chans = sx_read_module_byte(board, addr, mc_type);
+ sx_dprintk(SX_DEBUG_PROBE, "Module at %x: %d "
+ "channels\n", addr, chans);
+ sx_dprintk(SX_DEBUG_PROBE, "Port at");
+ for (j = 0; j < chans; j++) {
+ /* The "sx-way" is the way it SHOULD be done.
+ That way in the future, the firmware may for
+ example pack the structures a bit more
+ efficient. Neil tells me it isn't going to
+ happen anytime soon though. */
if (IS_SX_BOARD(board))
- port->ch_base = sx_read_module_word (board, addr+j*2, mc_chan_pointer);
+ port->ch_base = sx_read_module_word(
+ board, addr + j * 2,
+ mc_chan_pointer);
else
- port->ch_base = addr + 0x100 + 0x300*j;
+ port->ch_base = addr + 0x100 + 0x300 *j;
- sx_dprintk (SX_DEBUG_PROBE, " %x", port->ch_base);
+ sx_dprintk(SX_DEBUG_PROBE, " %x",
+ port->ch_base);
port->line = portno++;
port++;
}
- sx_dprintk (SX_DEBUG_PROBE, "\n");
+ sx_dprintk(SX_DEBUG_PROBE, "\n");
}
/* This has to be done earlier. */
/* board->flags |= SX_BOARD_INITIALIZED; */
return 0;
}
+static unsigned int sx_find_free_board(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < SX_NBOARDS; i++)
+ if (!(boards[i].flags & SX_BOARD_PRESENT))
+ break;
+
+ return i;
+}
+
static void __exit sx_release_drivers(void)
{
func_enter();
func_exit();
}
+static void __devexit sx_remove_card(struct sx_board *board,
+ struct pci_dev *pdev)
+{
+ if (board->flags & SX_BOARD_INITIALIZED) {
+ /* The board should stop messing with us. (actually I mean the
+ interrupt) */
+ sx_reset(board);
+ if ((board->irq) && (board->flags & SX_IRQ_ALLOCATED))
+ free_irq(board->irq, board);
+
+ /* It is safe/allowed to del_timer a non-active timer */
+ del_timer(&board->timer);
+ if (pdev) {
+#ifdef CONFIG_PCI
+ pci_iounmap(pdev, board->base);
+ pci_release_region(pdev, IS_CF_BOARD(board) ? 3 : 2);
+#endif
+ } else {
+ iounmap(board->base);
+ release_region(board->hw_base, board->hw_len);
+ }
+
+ board->flags &= ~(SX_BOARD_INITIALIZED | SX_BOARD_PRESENT);
+ }
+}
+
+#ifdef CONFIG_EISA
+
+static int __devinit sx_eisa_probe(struct device *dev)
+{
+ struct eisa_device *edev = to_eisa_device(dev);
+ struct sx_board *board;
+ unsigned long eisa_slot = edev->base_addr;
+ unsigned int i;
+ int retval = -EIO;
+
+ mutex_lock(&sx_boards_lock);
+ i = sx_find_free_board();
+ if (i == SX_NBOARDS) {
+ mutex_unlock(&sx_boards_lock);
+ goto err;
+ }
+ board = &boards[i];
+ board->flags |= SX_BOARD_PRESENT;
+ mutex_unlock(&sx_boards_lock);
+
+ dev_info(dev, "XIO : Signature found in EISA slot %lu, "
+ "Product %d Rev %d (REPORT THIS TO LKLM)\n",
+ eisa_slot >> 12,
+ inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 2),
+ inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 3));
+
+ board->eisa_base = eisa_slot;
+ board->flags &= ~SX_BOARD_TYPE;
+ board->flags |= SI_EISA_BOARD;
+
+ board->hw_base = ((inb(eisa_slot + 0xc01) << 8) +
+ inb(eisa_slot + 0xc00)) << 16;
+ board->hw_len = SI2_EISA_WINDOW_LEN;
+ if (!request_region(board->hw_base, board->hw_len, "sx")) {
+ dev_err(dev, "can't request region\n");
+ goto err_flag;
+ }
+ board->base2 =
+ board->base = ioremap(board->hw_base, SI2_EISA_WINDOW_LEN);
+ if (!board->base) {
+ dev_err(dev, "can't remap memory\n");
+ goto err_reg;
+ }
+
+ sx_dprintk(SX_DEBUG_PROBE, "IO hw_base address: %lx\n", board->hw_base);
+ sx_dprintk(SX_DEBUG_PROBE, "base: %p\n", board->base);
+ board->irq = inb(eisa_slot + 0xc02) >> 4;
+ sx_dprintk(SX_DEBUG_PROBE, "IRQ: %d\n", board->irq);
+
+ if (!probe_si(board))
+ goto err_unmap;
+
+ dev_set_drvdata(dev, board);
+
+ return 0;
+err_unmap:
+ iounmap(board->base);
+err_reg:
+ release_region(board->hw_base, board->hw_len);
+err_flag:
+ board->flags &= ~SX_BOARD_PRESENT;
+err:
+ return retval;
+}
+
+static int __devexit sx_eisa_remove(struct device *dev)
+{
+ struct sx_board *board = dev_get_drvdata(dev);
+
+ sx_remove_card(board, NULL);
+
+ return 0;
+}
+
+static struct eisa_device_id sx_eisa_tbl[] = {
+ { "SLX" },
+ { "" }
+};
+
+MODULE_DEVICE_TABLE(eisa, sx_eisa_tbl);
+
+static struct eisa_driver sx_eisadriver = {
+ .id_table = sx_eisa_tbl,
+ .driver = {
+ .name = "sx",
+ .probe = sx_eisa_probe,
+ .remove = __devexit_p(sx_eisa_remove),
+ }
+};
+
+#endif
+
#ifdef CONFIG_PCI
/********************************************************
* Setting bit 17 in the CNTRL register of the PLX 9050 *
EEprom. As the bit is read/write for the CPU, we can fix it here,
if we detect that it isn't set correctly. -- REW */
-static void fix_sx_pci (struct pci_dev *pdev, struct sx_board *board)
+static void __devinit fix_sx_pci(struct pci_dev *pdev, struct sx_board *board)
{
unsigned int hwbase;
void __iomem *rebase;
unsigned int t;
-#define CNTRL_REG_OFFSET 0x50
-#define CNTRL_REG_GOODVALUE 0x18260000
+#define CNTRL_REG_OFFSET 0x50
+#define CNTRL_REG_GOODVALUE 0x18260000
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &hwbase);
hwbase &= PCI_BASE_ADDRESS_MEM_MASK;
rebase = ioremap(hwbase, 0x80);
- t = readl (rebase + CNTRL_REG_OFFSET);
+ t = readl(rebase + CNTRL_REG_OFFSET);
if (t != CNTRL_REG_GOODVALUE) {
- printk (KERN_DEBUG "sx: performing cntrl reg fix: %08x -> %08x\n", t, CNTRL_REG_GOODVALUE);
- writel (CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET);
+ printk(KERN_DEBUG "sx: performing cntrl reg fix: %08x -> "
+ "%08x\n", t, CNTRL_REG_GOODVALUE);
+ writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET);
}
iounmap(rebase);
}
#endif
-
-static int __init sx_init(void)
+static int __devinit sx_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
- int i;
- int found = 0;
- int eisa_slot;
+#ifdef CONFIG_PCI
struct sx_board *board;
+ unsigned int i, reg;
+ int retval = -EIO;
-#ifdef CONFIG_PCI
- struct pci_dev *pdev = NULL;
- unsigned int tint;
- unsigned short tshort;
-#endif
+ mutex_lock(&sx_boards_lock);
+ i = sx_find_free_board();
+ if (i == SX_NBOARDS) {
+ mutex_unlock(&sx_boards_lock);
+ goto err;
+ }
+ board = &boards[i];
+ board->flags |= SX_BOARD_PRESENT;
+ mutex_unlock(&sx_boards_lock);
- func_enter();
- sx_dprintk (SX_DEBUG_INIT, "Initing sx module... (sx_debug=%d)\n", sx_debug);
- if (abs ((long) (&sx_debug) - sx_debug) < 0x10000) {
- printk (KERN_WARNING "sx: sx_debug is an address, instead of a value. "
- "Assuming -1.\n");
- printk ("(%p)\n", &sx_debug);
- sx_debug=-1;
+ retval = pci_enable_device(pdev);
+ if (retval)
+ goto err_flag;
+
+ board->flags &= ~SX_BOARD_TYPE;
+ board->flags |= (pdev->subsystem_vendor == 0x200) ? SX_PCI_BOARD :
+ SX_CFPCI_BOARD;
+
+ /* CF boards use base address 3.... */
+ reg = IS_CF_BOARD(board) ? 3 : 2;
+ retval = pci_request_region(pdev, reg, "sx");
+ if (retval) {
+ dev_err(&pdev->dev, "can't request region\n");
+ goto err_flag;
+ }
+ board->hw_base = pci_resource_start(pdev, reg);
+ board->base2 =
+ board->base = pci_iomap(pdev, reg, WINDOW_LEN(board));
+ if (!board->base) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ goto err_reg;
}
- if (misc_register(&sx_fw_device) < 0) {
- printk(KERN_ERR "SX: Unable to register firmware loader driver.\n");
- return -EIO;
+ /* Most of the stuff on the CF board is offset by 0x18000 .... */
+ if (IS_CF_BOARD(board))
+ board->base += 0x18000;
+
+ board->irq = pdev->irq;
+
+ dev_info(&pdev->dev, "Got a specialix card: %p(%d) %x.\n", board->base,
+ board->irq, board->flags);
+
+ if (!probe_sx(board)) {
+ retval = -EIO;
+ goto err_unmap;
}
-#ifdef CONFIG_PCI
- while ((pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX,
- PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
- pdev))) {
- if (pci_enable_device(pdev))
- continue;
+ fix_sx_pci(pdev, board);
- /* Specialix has a whole bunch of cards with
- 0x2000 as the device ID. They say its because
- the standard requires it. Stupid standard. */
- /* It seems that reading a word doesn't work reliably on 2.0.
- Also, reading a non-aligned dword doesn't work. So we read the
- whole dword at 0x2c and extract the word at 0x2e (SUBSYSTEM_ID)
- ourselves */
- /* I don't know why the define doesn't work, constant 0x2c does --REW */
- pci_read_config_dword (pdev, 0x2c, &tint);
- tshort = (tint >> 16) & 0xffff;
- sx_dprintk (SX_DEBUG_PROBE, "Got a specialix card: %x.\n", tint);
- /* sx_dprintk (SX_DEBUG_PROBE, "pdev = %d/%d (%x)\n", pdev, tint); */
- if ((tshort != 0x0200) && (tshort != 0x0300)) {
- sx_dprintk (SX_DEBUG_PROBE, "But it's not an SX card (%d)...\n",
- tshort);
- continue;
- }
- board = &boards[found];
+ pci_set_drvdata(pdev, board);
- board->flags &= ~SX_BOARD_TYPE;
- board->flags |= (tshort == 0x200)?SX_PCI_BOARD:
- SX_CFPCI_BOARD;
-
- /* CF boards use base address 3.... */
- if (IS_CF_BOARD (board))
- board->hw_base = pci_resource_start (pdev, 3);
- else
- board->hw_base = pci_resource_start (pdev, 2);
- board->base2 =
- board->base = ioremap(board->hw_base, WINDOW_LEN (board));
- if (!board->base) {
- printk(KERN_ERR "ioremap failed\n");
- /* XXX handle error */
- }
+ return 0;
+err_unmap:
+ pci_iounmap(pdev, board->base);
+err_reg:
+ pci_release_region(pdev, reg);
+err_flag:
+ board->flags &= ~SX_BOARD_PRESENT;
+err:
+ return retval;
+#else
+ return -ENODEV;
+#endif
+}
- /* Most of the stuff on the CF board is offset by
- 0x18000 .... */
- if (IS_CF_BOARD (board)) board->base += 0x18000;
+static void __devexit sx_pci_remove(struct pci_dev *pdev)
+{
+ struct sx_board *board = pci_get_drvdata(pdev);
- board->irq = pdev->irq;
+ sx_remove_card(board, pdev);
+}
- sx_dprintk (SX_DEBUG_PROBE, "Got a specialix card: %x/%p(%d) %x.\n",
- tint, boards[found].base, board->irq, board->flags);
+/* Specialix has a whole bunch of cards with 0x2000 as the device ID. They say
+ its because the standard requires it. So check for SUBVENDOR_ID. */
+static struct pci_device_id sx_pci_tbl[] = {
+ { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
+ .subvendor = 0x0200,.subdevice = PCI_ANY_ID },
+ { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
+ .subvendor = 0x0300,.subdevice = PCI_ANY_ID },
+ { 0 }
+};
- if (probe_sx (board)) {
- found++;
- fix_sx_pci (pdev, board);
- } else
- iounmap(board->base2);
- }
+MODULE_DEVICE_TABLE(pci, sx_pci_tbl);
+
+static struct pci_driver sx_pcidriver = {
+ .name = "sx",
+ .id_table = sx_pci_tbl,
+ .probe = sx_pci_probe,
+ .remove = __devexit_p(sx_pci_remove)
+};
+
+static int __init sx_init(void)
+{
+#ifdef CONFIG_EISA
+ int retval1;
+#endif
+#ifdef CONFIG_ISA
+ struct sx_board *board;
+ unsigned int i;
#endif
+ unsigned int found = 0;
+ int retval;
- for (i=0;i<NR_SX_ADDRS;i++) {
+ func_enter();
+ sx_dprintk(SX_DEBUG_INIT, "Initing sx module... (sx_debug=%d)\n",
+ sx_debug);
+ if (abs((long)(&sx_debug) - sx_debug) < 0x10000) {
+ printk(KERN_WARNING "sx: sx_debug is an address, instead of a "
+ "value. Assuming -1.\n(%p)\n", &sx_debug);
+ sx_debug = -1;
+ }
+
+ if (misc_register(&sx_fw_device) < 0) {
+ printk(KERN_ERR "SX: Unable to register firmware loader "
+ "driver.\n");
+ return -EIO;
+ }
+#ifdef CONFIG_ISA
+ for (i = 0; i < NR_SX_ADDRS; i++) {
board = &boards[found];
board->hw_base = sx_probe_addrs[i];
+ board->hw_len = SX_WINDOW_LEN;
+ if (!request_region(board->hw_base, board->hw_len, "sx"))
+ continue;
board->base2 =
- board->base = ioremap(board->hw_base, SX_WINDOW_LEN);
+ board->base = ioremap(board->hw_base, board->hw_len);
+ if (!board->base)
+ goto err_sx_reg;
board->flags &= ~SX_BOARD_TYPE;
- board->flags |= SX_ISA_BOARD;
- board->irq = sx_irqmask?-1:0;
+ board->flags |= SX_ISA_BOARD;
+ board->irq = sx_irqmask ? -1 : 0;
- if (probe_sx (board)) {
+ if (probe_sx(board)) {
+ board->flags |= SX_BOARD_PRESENT;
found++;
} else {
iounmap(board->base);
+err_sx_reg:
+ release_region(board->hw_base, board->hw_len);
}
}
- for (i=0;i<NR_SI_ADDRS;i++) {
+ for (i = 0; i < NR_SI_ADDRS; i++) {
board = &boards[found];
board->hw_base = si_probe_addrs[i];
+ board->hw_len = SI2_ISA_WINDOW_LEN;
+ if (!request_region(board->hw_base, board->hw_len, "sx"))
+ continue;
board->base2 =
- board->base = ioremap(board->hw_base, SI2_ISA_WINDOW_LEN);
+ board->base = ioremap(board->hw_base, board->hw_len);
+ if (!board->base)
+ goto err_si_reg;
board->flags &= ~SX_BOARD_TYPE;
- board->flags |= SI_ISA_BOARD;
- board->irq = sx_irqmask ?-1:0;
+ board->flags |= SI_ISA_BOARD;
+ board->irq = sx_irqmask ? -1 : 0;
- if (probe_si (board)) {
+ if (probe_si(board)) {
+ board->flags |= SX_BOARD_PRESENT;
found++;
} else {
- iounmap (board->base);
+ iounmap(board->base);
+err_si_reg:
+ release_region(board->hw_base, board->hw_len);
}
}
- for (i=0;i<NR_SI1_ADDRS;i++) {
+ for (i = 0; i < NR_SI1_ADDRS; i++) {
board = &boards[found];
board->hw_base = si1_probe_addrs[i];
+ board->hw_len = SI1_ISA_WINDOW_LEN;
+ if (!request_region(board->hw_base, board->hw_len, "sx"))
+ continue;
board->base2 =
- board->base = ioremap(board->hw_base, SI1_ISA_WINDOW_LEN);
+ board->base = ioremap(board->hw_base, board->hw_len);
+ if (!board->base)
+ goto err_si1_reg;
board->flags &= ~SX_BOARD_TYPE;
- board->flags |= SI1_ISA_BOARD;
- board->irq = sx_irqmask ?-1:0;
+ board->flags |= SI1_ISA_BOARD;
+ board->irq = sx_irqmask ? -1 : 0;
- if (probe_si (board)) {
+ if (probe_si(board)) {
+ board->flags |= SX_BOARD_PRESENT;
found++;
} else {
- iounmap (board->base);
+ iounmap(board->base);
+err_si1_reg:
+ release_region(board->hw_base, board->hw_len);
}
}
+#endif
+#ifdef CONFIG_EISA
+ retval1 = eisa_driver_register(&sx_eisadriver);
+#endif
+ retval = pci_register_driver(&sx_pcidriver);
- sx_dprintk(SX_DEBUG_PROBE, "Probing for EISA cards\n");
- for(eisa_slot=0x1000; eisa_slot<0x10000; eisa_slot+=0x1000)
- {
- if((inb(eisa_slot+0xc80)==0x4d) &&
- (inb(eisa_slot+0xc81)==0x98))
- {
- sx_dprintk(SX_DEBUG_PROBE, "%s : Signature found in EISA slot %d, Product %d Rev %d\n",
- "XIO", (eisa_slot>>12), inb(eisa_slot+0xc82), inb(eisa_slot+0xc83));
-
- board = &boards[found];
- board->eisa_base = eisa_slot;
- board->flags &= ~SX_BOARD_TYPE;
- board->flags |= SI_EISA_BOARD;
-
- board->hw_base = (((inb(0xc01+eisa_slot) << 8) + inb(0xc00+eisa_slot)) << 16);
- board->base2 =
- board->base = ioremap(board->hw_base, SI2_EISA_WINDOW_LEN);
-
- sx_dprintk(SX_DEBUG_PROBE, "IO hw_base address: %lx\n", board->hw_base);
- sx_dprintk(SX_DEBUG_PROBE, "base: %p\n", board->base);
- board->irq = inb(board->eisa_base+0xc02)>>4;
- sx_dprintk(SX_DEBUG_PROBE, "IRQ: %d\n", board->irq);
-
- probe_si(board);
-
- found++;
- }
- }
if (found) {
- printk (KERN_INFO "sx: total of %d boards detected.\n", found);
- } else {
- misc_deregister(&sx_fw_device);
+ printk(KERN_INFO "sx: total of %d boards detected.\n", found);
+ retval = 0;
+ } else if (retval) {
+#ifdef CONFIG_EISA
+ retval = retval1;
+ if (retval1)
+#endif
+ misc_deregister(&sx_fw_device);
}
func_exit();
- return found?0:-EIO;
+ return retval;
}
-
-static void __exit sx_exit (void)
+static void __exit sx_exit(void)
{
- int i;
- struct sx_board *board;
+ int i;
func_enter();
- for (i = 0; i < SX_NBOARDS; i++) {
- board = &boards[i];
- if (board->flags & SX_BOARD_INITIALIZED) {
- sx_dprintk (SX_DEBUG_CLEANUP, "Cleaning up board at %p\n", board->base);
- /* The board should stop messing with us.
- (actually I mean the interrupt) */
- sx_reset (board);
- if ((board->irq) && (board->flags & SX_IRQ_ALLOCATED))
- free_irq (board->irq, board);
-
- /* It is safe/allowed to del_timer a non-active timer */
- del_timer (& board->timer);
- iounmap(board->base);
- }
- }
+#ifdef CONFIG_EISA
+ eisa_driver_unregister(&sx_eisadriver);
+#endif
+ pci_unregister_driver(&sx_pcidriver);
+
+ for (i = 0; i < SX_NBOARDS; i++)
+ sx_remove_card(&boards[i], NULL);
+
if (misc_deregister(&sx_fw_device) < 0) {
- printk (KERN_INFO "sx: couldn't deregister firmware loader device\n");
+ printk(KERN_INFO "sx: couldn't deregister firmware loader "
+ "device\n");
}
- sx_dprintk (SX_DEBUG_CLEANUP, "Cleaning up drivers (%d)\n", sx_initialized);
+ sx_dprintk(SX_DEBUG_CLEANUP, "Cleaning up drivers (%d)\n",
+ sx_initialized);
if (sx_initialized)
- sx_release_drivers ();
+ sx_release_drivers();
- kfree (sx_ports);
+ kfree(sx_ports);
func_exit();
}
module_init(sx_init);
module_exit(sx_exit);
-
-
void __iomem *base;
void __iomem *base2;
unsigned long hw_base;
+ resource_size_t hw_len;
int eisa_base;
int port_base; /* Number of the first port */
struct sx_port *ports;
*
* Return Value: None
*/
-static void mgsl_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
unsigned long flags;
{
struct mgsl_struct *info;
- info = (struct mgsl_struct *)kmalloc(sizeof(struct mgsl_struct),
+ info = kmalloc(sizeof(struct mgsl_struct),
GFP_KERNEL);
if (!info) {
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &mgsl_ops);
if ((rc = tty_register_driver(serial_driver)) < 0) {
static int open(struct tty_struct *tty, struct file * filp);
static void close(struct tty_struct *tty, struct file * filp);
static void hangup(struct tty_struct *tty);
-static void set_termios(struct tty_struct *tty, struct termios *old_termios);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
static int write(struct tty_struct *tty, const unsigned char *buf, int count);
static void put_char(struct tty_struct *tty, unsigned char ch);
wake_up_interruptible(&info->open_wait);
}
-static void set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct slgt_info *info = tty->driver_data;
unsigned long flags;
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &ops);
if ((rc = tty_register_driver(serial_driver)) < 0) {
static int open(struct tty_struct *tty, struct file * filp);
static void close(struct tty_struct *tty, struct file * filp);
static void hangup(struct tty_struct *tty);
-static void set_termios(struct tty_struct *tty, struct termios *old_termios);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
static int write(struct tty_struct *tty, const unsigned char *buf, int count);
static void put_char(struct tty_struct *tty, unsigned char ch);
/* Set new termios settings
*/
-static void set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
unsigned long flags;
return 0;
if (!info->tx_buf) {
- info->tx_buf = (unsigned char *)kmalloc(info->max_frame_size, GFP_KERNEL);
+ info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
if (!info->tx_buf) {
printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
__FILE__,__LINE__,info->device_name);
{
SLMP_INFO *info;
- info = (SLMP_INFO *)kmalloc(sizeof(SLMP_INFO),
+ info = kmalloc(sizeof(SLMP_INFO),
GFP_KERNEL);
if (!info) {
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->init_termios.c_ispeed = 9600;
+ serial_driver->init_termios.c_ospeed = 9600;
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &ops);
if ((rc = tty_register_driver(serial_driver)) < 0) {
#include <asm/irq_regs.h>
/* Whether we react on sysrq keys or just ignore them */
-int sysrq_enabled = 1;
+int __read_mostly __sysrq_enabled = 1;
+
+static int __read_mostly sysrq_always_enabled;
+
+int sysrq_on(void)
+{
+ return __sysrq_enabled || sysrq_always_enabled;
+}
+
+/*
+ * A value of 1 means 'all', other nonzero values are an op mask:
+ */
+static inline int sysrq_on_mask(int mask)
+{
+ return sysrq_always_enabled || __sysrq_enabled == 1 ||
+ (__sysrq_enabled & mask);
+}
+
+static int __init sysrq_always_enabled_setup(char *str)
+{
+ sysrq_always_enabled = 1;
+ printk(KERN_INFO "debug: sysrq always enabled.\n");
+
+ return 1;
+}
+
+__setup("sysrq_always_enabled", sysrq_always_enabled_setup);
+
static void sysrq_handle_loglevel(int key, struct tty_struct *tty)
{
* Should we check for enabled operations (/proc/sysrq-trigger
* should not) and is the invoked operation enabled?
*/
- if (!check_mask || sysrq_enabled == 1 ||
- (sysrq_enabled & op_p->enable_mask)) {
+ if (!check_mask || sysrq_on_mask(op_p->enable_mask)) {
printk("%s\n", op_p->action_msg);
console_loglevel = orig_log_level;
op_p->handler(key, tty);
*/
void handle_sysrq(int key, struct tty_struct *tty)
{
- if (!sysrq_enabled)
- return;
- __handle_sysrq(key, tty, 1);
+ if (sysrq_on())
+ __handle_sysrq(key, tty, 1);
}
EXPORT_SYMBOL(handle_sysrq);
unsigned int minor;
char value;
- minor = iminor(file->f_dentry->d_inode);
+ minor = iminor(file->f_path.dentry->d_inode);
switch (minor) {
case 0:
value = get_led();
int retval = 0;
char c;
- minor = iminor(file->f_dentry->d_inode);
+ minor = iminor(file->f_path.dentry->d_inode);
switch (minor) {
case 0:
type = TYPE_LED;
tipar_write (struct file *file, const char __user *buf, size_t count,
loff_t * ppos)
{
- unsigned int minor = iminor(file->f_dentry->d_inode) - TIPAR_MINOR;
+ unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
ssize_t n;
parport_claim_or_block(table[minor].dev);
tipar_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
{
int b = 0;
- unsigned int minor = iminor(file->f_dentry->d_inode) - TIPAR_MINOR;
+ unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
ssize_t retval = 0;
ssize_t n = 0;
#define TTY_PARANOIA_CHECK 1
#define CHECK_TTY_COUNT 1
-struct termios tty_std_termios = { /* for the benefit of tty drivers */
+struct ktermios tty_std_termios = { /* for the benefit of tty drivers */
.c_iflag = ICRNL | IXON,
.c_oflag = OPOST | ONLCR,
.c_cflag = B38400 | CS8 | CREAD | HUPCL,
.c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
ECHOCTL | ECHOKE | IEXTEN,
- .c_cc = INIT_C_CC
+ .c_cc = INIT_C_CC,
+ .c_ispeed = 38400,
+ .c_ospeed = 38400
};
EXPORT_SYMBOL(tty_std_termios);
LIST_HEAD(tty_drivers); /* linked list of tty drivers */
-/* Semaphore to protect creating and releasing a tty. This is shared with
+/* Mutex to protect creating and releasing a tty. This is shared with
vt.c for deeply disgusting hack reasons */
DEFINE_MUTEX(tty_mutex);
EXPORT_SYMBOL(tty_mutex);
"!= #fd's(%d) in %s\n",
tty->name, tty->count, count, routine);
return count;
- }
+ }
#endif
return 0;
}
* Tty buffer allocation management
*/
-
-/**
- * tty_buffer_free_all - free buffers used by a tty
- * @tty: tty to free from
- *
- * Remove all the buffers pending on a tty whether queued with data
- * or in the free ring. Must be called when the tty is no longer in use
- *
- * Locking: none
- */
-
-
/**
* tty_buffer_free_all - free buffers used by a tty
* @tty: tty to free from
* they are not on hot paths so a little discipline won't do
* any harm.
*
- * Locking: takes termios_sem
+ * Locking: takes termios_mutex
*/
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
* context.
*
* Locking: takes tty_ldisc_lock.
- * called functions take termios_sem
+ * called functions take termios_mutex
*/
static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
}
EXPORT_SYMBOL_GPL(tty_ldisc_flush);
+
+/**
+ * tty_reset_termios - reset terminal state
+ * @tty: tty to reset
+ *
+ * Restore a terminal to the driver default state
+ */
+
+static void tty_reset_termios(struct tty_struct *tty)
+{
+ mutex_lock(&tty->termios_mutex);
+ *tty->termios = tty->driver->init_termios;
+ tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
+ tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+ mutex_unlock(&tty->termios_mutex);
+}
/**
* do_tty_hangup - actual handler for hangup events
*
* Locking:
* BKL
- * redirect lock for undoing redirection
- * file list lock for manipulating list of ttys
- * tty_ldisc_lock from called functions
- * termios_sem resetting termios data
- * tasklist_lock to walk task list for hangup event
- *
+ * redirect lock for undoing redirection
+ * file list lock for manipulating list of ttys
+ * tty_ldisc_lock from called functions
+ * termios_mutex resetting termios data
+ * tasklist_lock to walk task list for hangup event
+ * ->siglock to protect ->signal/->sighand
*/
static void do_tty_hangup(struct work_struct *work)
{
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
- {
- mutex_lock(&tty->termios_mutex);
- *tty->termios = tty->driver->init_termios;
- mutex_unlock(&tty->termios_mutex);
- }
+ tty_reset_termios(tty);
/* Defer ldisc switch */
/* tty_deferred_ldisc_switch(N_TTY);
read_lock(&tasklist_lock);
if (tty->session > 0) {
do_each_task_pid(tty->session, PIDTYPE_SID, p) {
+ spin_lock_irq(&p->sighand->siglock);
if (p->signal->tty == tty)
p->signal->tty = NULL;
- if (!p->signal->leader)
+ if (!p->signal->leader) {
+ spin_unlock_irq(&p->sighand->siglock);
continue;
- group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
- group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
+ }
+ __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
+ __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
if (tty->pgrp > 0)
p->signal->tty_old_pgrp = tty->pgrp;
+ spin_unlock_irq(&p->sighand->siglock);
} while_each_task_pid(tty->session, PIDTYPE_SID, p);
}
read_unlock(&tasklist_lock);
EXPORT_SYMBOL(tty_hung_up_p);
+static void session_clear_tty(pid_t session)
+{
+ struct task_struct *p;
+ do_each_task_pid(session, PIDTYPE_SID, p) {
+ proc_clear_tty(p);
+ } while_each_task_pid(session, PIDTYPE_SID, p);
+}
+
/**
* disassociate_ctty - disconnect controlling tty
* @on_exit: true if exiting so need to "hang up" the session
* The argument on_exit is set to 1 if called when a process is
* exiting; it is 0 if called by the ioctl TIOCNOTTY.
*
- * Locking: tty_mutex is taken to protect current->signal->tty
+ * Locking:
* BKL is taken for hysterical raisins
- * Tasklist lock is taken (under tty_mutex) to walk process
- * lists for the session.
+ * tty_mutex is taken to protect tty
+ * ->siglock is taken to protect ->signal/->sighand
+ * tasklist_lock is taken to walk process list for sessions
+ * ->siglock is taken to protect ->signal/->sighand
*/
void disassociate_ctty(int on_exit)
{
struct tty_struct *tty;
- struct task_struct *p;
int tty_pgrp = -1;
+ int session;
lock_kernel();
mutex_lock(&tty_mutex);
- tty = current->signal->tty;
+ tty = get_current_tty();
if (tty) {
tty_pgrp = tty->pgrp;
mutex_unlock(&tty_mutex);
+ /* XXX: here we race, there is nothing protecting tty */
if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
tty_vhangup(tty);
} else {
- if (current->signal->tty_old_pgrp) {
- kill_pg(current->signal->tty_old_pgrp, SIGHUP, on_exit);
- kill_pg(current->signal->tty_old_pgrp, SIGCONT, on_exit);
+ pid_t old_pgrp = current->signal->tty_old_pgrp;
+ if (old_pgrp) {
+ kill_pg(old_pgrp, SIGHUP, on_exit);
+ kill_pg(old_pgrp, SIGCONT, on_exit);
}
mutex_unlock(&tty_mutex);
unlock_kernel();
kill_pg(tty_pgrp, SIGCONT, on_exit);
}
- /* Must lock changes to tty_old_pgrp */
- mutex_lock(&tty_mutex);
+ spin_lock_irq(¤t->sighand->siglock);
current->signal->tty_old_pgrp = 0;
- tty->session = 0;
- tty->pgrp = -1;
+ session = process_session(current);
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ mutex_lock(&tty_mutex);
+ /* It is possible that do_tty_hangup has free'd this tty */
+ tty = get_current_tty();
+ if (tty) {
+ tty->session = 0;
+ tty->pgrp = 0;
+ } else {
+#ifdef TTY_DEBUG_HANGUP
+ printk(KERN_DEBUG "error attempted to write to tty [0x%p]"
+ " = NULL", tty);
+#endif
+ }
+ mutex_unlock(&tty_mutex);
/* Now clear signal->tty under the lock */
read_lock(&tasklist_lock);
- do_each_task_pid(current->signal->session, PIDTYPE_SID, p) {
- p->signal->tty = NULL;
- } while_each_task_pid(current->signal->session, PIDTYPE_SID, p);
+ session_clear_tty(session);
read_unlock(&tasklist_lock);
- mutex_unlock(&tty_mutex);
unlock_kernel();
}
struct tty_ldisc *ld;
tty = (struct tty_struct *)file->private_data;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if (tty_paranoia_check(tty, inode, "tty_read"))
return -EIO;
if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
cond_resched();
}
if (written) {
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
inode->i_mtime = current_fs_time(inode->i_sb);
ret = written;
}
loff_t *ppos)
{
struct tty_struct * tty;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
ssize_t ret;
struct tty_ldisc *ld;
struct tty_struct **ret_tty)
{
struct tty_struct *tty, *o_tty;
- struct termios *tp, **tp_loc, *o_tp, **o_tp_loc;
- struct termios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
+ struct ktermios *tp, **tp_loc, *o_tp, **o_tp_loc;
+ struct ktermios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
int retval = 0;
/* check whether we're reopening an existing tty */
}
if (!*tp_loc) {
- tp = (struct termios *) kmalloc(sizeof(struct termios),
+ tp = (struct ktermios *) kmalloc(sizeof(struct ktermios),
GFP_KERNEL);
if (!tp)
goto free_mem_out;
}
if (!*ltp_loc) {
- ltp = (struct termios *) kmalloc(sizeof(struct termios),
+ ltp = (struct ktermios *) kmalloc(sizeof(struct ktermios),
GFP_KERNEL);
if (!ltp)
goto free_mem_out;
- memset(ltp, 0, sizeof(struct termios));
+ memset(ltp, 0, sizeof(struct ktermios));
}
if (driver->type == TTY_DRIVER_TYPE_PTY) {
}
if (!*o_tp_loc) {
- o_tp = (struct termios *)
- kmalloc(sizeof(struct termios), GFP_KERNEL);
+ o_tp = (struct ktermios *)
+ kmalloc(sizeof(struct ktermios), GFP_KERNEL);
if (!o_tp)
goto free_mem_out;
*o_tp = driver->other->init_termios;
}
if (!*o_ltp_loc) {
- o_ltp = (struct termios *)
- kmalloc(sizeof(struct termios), GFP_KERNEL);
+ o_ltp = (struct ktermios *)
+ kmalloc(sizeof(struct ktermios), GFP_KERNEL);
if (!o_ltp)
goto free_mem_out;
- memset(o_ltp, 0, sizeof(struct termios));
+ memset(o_ltp, 0, sizeof(struct ktermios));
}
/*
*ltp_loc = ltp;
tty->termios = *tp_loc;
tty->termios_locked = *ltp_loc;
+ /* Compatibility until drivers always set this */
+ tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
+ tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
driver->refcount++;
tty->count++;
static void release_mem(struct tty_struct *tty, int idx)
{
struct tty_struct *o_tty;
- struct termios *tp;
+ struct ktermios *tp;
int devpts = tty->driver->flags & TTY_DRIVER_DEVPTS_MEM;
if ((o_tty = tty->link) != NULL) {
unsigned long flags;
tty = (struct tty_struct *)filp->private_data;
- if (tty_paranoia_check(tty, filp->f_dentry->d_inode, "release_dev"))
+ if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "release_dev"))
return;
check_tty_count(tty, "release_dev");
* tty.
*/
if (tty_closing || o_tty_closing) {
- struct task_struct *p;
-
read_lock(&tasklist_lock);
- do_each_task_pid(tty->session, PIDTYPE_SID, p) {
- p->signal->tty = NULL;
- } while_each_task_pid(tty->session, PIDTYPE_SID, p);
+ session_clear_tty(tty->session);
if (o_tty)
- do_each_task_pid(o_tty->session, PIDTYPE_SID, p) {
- p->signal->tty = NULL;
- } while_each_task_pid(o_tty->session, PIDTYPE_SID, p);
+ session_clear_tty(o_tty->session);
read_unlock(&tasklist_lock);
}
* The termios state of a pty is reset on first open so that
* settings don't persist across reuse.
*
- * Locking: tty_mutex protects current->signal->tty, get_tty_driver and
- * init_dev work. tty->count should protect the rest.
- * task_lock is held to update task details for sessions
+ * Locking: tty_mutex protects tty, get_tty_driver and init_dev work.
+ * tty->count should protect the rest.
+ * ->siglock protects ->signal/->sighand
*/
static int tty_open(struct inode * inode, struct file * filp)
mutex_lock(&tty_mutex);
if (device == MKDEV(TTYAUX_MAJOR,0)) {
- if (!current->signal->tty) {
+ tty = get_current_tty();
+ if (!tty) {
mutex_unlock(&tty_mutex);
return -ENXIO;
}
- driver = current->signal->tty->driver;
- index = current->signal->tty->index;
+ driver = tty->driver;
+ index = tty->index;
filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
/* noctty = 1; */
goto got_driver;
filp->f_op = &tty_fops;
goto retry_open;
}
+
+ mutex_lock(&tty_mutex);
+ spin_lock_irq(¤t->sighand->siglock);
if (!noctty &&
current->signal->leader &&
!current->signal->tty &&
- tty->session == 0) {
- task_lock(current);
- current->signal->tty = tty;
- task_unlock(current);
- current->signal->tty_old_pgrp = 0;
- tty->session = current->signal->session;
- tty->pgrp = process_group(current);
- }
+ tty->session == 0)
+ __proc_set_tty(current, tty);
+ spin_unlock_irq(¤t->sighand->siglock);
+ mutex_unlock(&tty_mutex);
return 0;
}
int ret = 0;
tty = (struct tty_struct *)filp->private_data;
- if (tty_paranoia_check(tty, filp->f_dentry->d_inode, "tty_poll"))
+ if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_poll"))
return 0;
ld = tty_ldisc_ref_wait(tty);
int retval;
tty = (struct tty_struct *)filp->private_data;
- if (tty_paranoia_check(tty, filp->f_dentry->d_inode, "tty_fasync"))
+ if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync"))
return 0;
retval = fasync_helper(fd, filp, on, &tty->fasync);
*
* Copies the kernel idea of the window size into the user buffer.
*
- * Locking: tty->termios_sem is taken to ensure the winsize data
+ * Locking: tty->termios_mutex is taken to ensure the winsize data
* is consistent.
*/
* Locking:
* Called function use the console_sem is used to ensure we do
* not try and resize the console twice at once.
- * The tty->termios_sem is used to ensure we don't double
- * resize and get confused. Lock order - tty->termios.sem before
+ * The tty->termios_mutex is used to ensure we don't double
+ * resize and get confused. Lock order - tty->termios_mutex before
* console sem
*/
* leader to set this tty as the controlling tty for the session.
*
* Locking:
- * Takes tasklist lock internally to walk sessions
- * Takes task_lock() when updating signal->tty
* Takes tty_mutex() to protect tty instance
- *
+ * Takes tasklist_lock internally to walk sessions
+ * Takes ->siglock() when updating signal->tty
*/
static int tiocsctty(struct tty_struct *tty, int arg)
{
- struct task_struct *p;
-
+ int ret = 0;
if (current->signal->leader &&
- (current->signal->session == tty->session))
- return 0;
+ (process_session(current) == tty->session))
+ return ret;
+
+ mutex_lock(&tty_mutex);
/*
* The process must be a session leader and
* not have a controlling tty already.
*/
- if (!current->signal->leader || current->signal->tty)
- return -EPERM;
+ if (!current->signal->leader || current->signal->tty) {
+ ret = -EPERM;
+ goto unlock;
+ }
+
if (tty->session > 0) {
/*
* This tty is already the controlling
/*
* Steal it away
*/
-
read_lock(&tasklist_lock);
- do_each_task_pid(tty->session, PIDTYPE_SID, p) {
- p->signal->tty = NULL;
- } while_each_task_pid(tty->session, PIDTYPE_SID, p);
+ session_clear_tty(tty->session);
read_unlock(&tasklist_lock);
- } else
- return -EPERM;
+ } else {
+ ret = -EPERM;
+ goto unlock;
+ }
}
- mutex_lock(&tty_mutex);
- task_lock(current);
- current->signal->tty = tty;
- task_unlock(current);
+ proc_set_tty(current, tty);
+unlock:
mutex_unlock(&tty_mutex);
- current->signal->tty_old_pgrp = 0;
- tty->session = current->signal->session;
- tty->pgrp = process_group(current);
- return 0;
+ return ret;
}
/**
* Obtain the process group of the tty. If there is no process group
* return an error.
*
- * Locking: none. Reference to ->signal->tty is safe.
+ * Locking: none. Reference to current->signal->tty is safe.
*/
static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
return retval;
if (!current->signal->tty ||
(current->signal->tty != real_tty) ||
- (real_tty->session != current->signal->session))
+ (real_tty->session != process_session(current)))
return -ENOTTY;
if (get_user(pgrp, p))
return -EFAULT;
if (pgrp < 0)
return -EINVAL;
- if (session_of_pgrp(pgrp) != current->signal->session)
+ if (session_of_pgrp(pgrp) != process_session(current))
return -EPERM;
real_tty->pgrp = pgrp;
return 0;
* Obtain the session id of the tty. If there is no session
* return an error.
*
- * Locking: none. Reference to ->signal->tty is safe.
+ * Locking: none. Reference to current->signal->tty is safe.
*/
static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
clear_bit(TTY_EXCLUSIVE, &tty->flags);
return 0;
case TIOCNOTTY:
- /* FIXME: taks lock or tty_mutex ? */
if (current->signal->tty != tty)
return -ENOTTY;
if (current->signal->leader)
disassociate_ctty(0);
- task_lock(current);
- current->signal->tty = NULL;
- task_unlock(current);
+ proc_clear_tty(current);
return 0;
case TIOCSCTTY:
return tiocsctty(tty, arg);
int session;
int i;
struct file *filp;
- struct tty_ldisc *disc;
struct fdtable *fdt;
if (!tty)
return;
- session = tty->session;
+ session = tty->session;
- /* We don't want an ldisc switch during this */
- disc = tty_ldisc_ref(tty);
- if (disc && disc->flush_buffer)
- disc->flush_buffer(tty);
- tty_ldisc_deref(disc);
+ tty_ldisc_flush(tty);
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
/* Kill the entire session */
do_each_task_pid(session, PIDTYPE_SID, p) {
printk(KERN_NOTICE "SAK: killed process %d"
- " (%s): p->signal->session==tty->session\n",
+ " (%s): process_session(p)==tty->session\n",
p->pid, p->comm);
send_sig(SIGKILL, p, 1);
} while_each_task_pid(session, PIDTYPE_SID, p);
do_each_thread(g, p) {
if (p->signal->tty == tty) {
printk(KERN_NOTICE "SAK: killed process %d"
- " (%s): p->signal->session==tty->session\n",
+ " (%s): process_session(p)==tty->session\n",
p->pid, p->comm);
send_sig(SIGKILL, p, 1);
continue;
tty_ldisc_deref(disc);
}
-/*
- * Routine which returns the baud rate of the tty
- *
- * Note that the baud_table needs to be kept in sync with the
- * include/asm/termbits.h file.
- */
-static int baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800,
-#ifdef __sparc__
- 76800, 153600, 307200, 614400, 921600
-#else
- 500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
- 2500000, 3000000, 3500000, 4000000
-#endif
-};
-
-static int n_baud_table = ARRAY_SIZE(baud_table);
-
-/**
- * tty_termios_baud_rate
- * @termios: termios structure
- *
- * Convert termios baud rate data into a speed. This should be called
- * with the termios lock held if this termios is a terminal termios
- * structure. May change the termios data.
- *
- * Locking: none
- */
-
-int tty_termios_baud_rate(struct termios *termios)
-{
- unsigned int cbaud;
-
- cbaud = termios->c_cflag & CBAUD;
-
- if (cbaud & CBAUDEX) {
- cbaud &= ~CBAUDEX;
-
- if (cbaud < 1 || cbaud + 15 > n_baud_table)
- termios->c_cflag &= ~CBAUDEX;
- else
- cbaud += 15;
- }
- return baud_table[cbaud];
-}
-
-EXPORT_SYMBOL(tty_termios_baud_rate);
-
-/**
- * tty_get_baud_rate - get tty bit rates
- * @tty: tty to query
- *
- * Returns the baud rate as an integer for this terminal. The
- * termios lock must be held by the caller and the terminal bit
- * flags may be updated.
- *
- * Locking: none
- */
-
-int tty_get_baud_rate(struct tty_struct *tty)
-{
- int baud = tty_termios_baud_rate(tty->termios);
-
- if (baud == 38400 && tty->alt_speed) {
- if (!tty->warned) {
- printk(KERN_WARNING "Use of setserial/setrocket to "
- "set SPD_* flags is deprecated\n");
- tty->warned = 1;
- }
- baud = tty->alt_speed;
- }
-
- return baud;
-}
-
-EXPORT_SYMBOL(tty_get_baud_rate);
-
/**
* tty_flip_buffer_push - terminal
* @tty: tty to push
if (p) {
driver->ttys = (struct tty_struct **)p;
- driver->termios = (struct termios **)(p + driver->num);
- driver->termios_locked = (struct termios **)(p + driver->num * 2);
+ driver->termios = (struct ktermios **)(p + driver->num);
+ driver->termios_locked = (struct ktermios **)(p + driver->num * 2);
} else {
driver->ttys = NULL;
driver->termios = NULL;
int tty_unregister_driver(struct tty_driver *driver)
{
int i;
- struct termios *tp;
+ struct ktermios *tp;
void *p;
if (driver->refcount)
cdev_del(&driver->cdev);
return 0;
}
-
EXPORT_SYMBOL(tty_unregister_driver);
+dev_t tty_devnum(struct tty_struct *tty)
+{
+ return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
+}
+EXPORT_SYMBOL(tty_devnum);
+
+void proc_clear_tty(struct task_struct *p)
+{
+ spin_lock_irq(&p->sighand->siglock);
+ p->signal->tty = NULL;
+ spin_unlock_irq(&p->sighand->siglock);
+}
+EXPORT_SYMBOL(proc_clear_tty);
+
+void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
+{
+ if (tty) {
+ tty->session = process_session(tsk);
+ tty->pgrp = process_group(tsk);
+ }
+ tsk->signal->tty = tty;
+ tsk->signal->tty_old_pgrp = 0;
+}
+
+void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
+{
+ spin_lock_irq(&tsk->sighand->siglock);
+ __proc_set_tty(tsk, tty);
+ spin_unlock_irq(&tsk->sighand->siglock);
+}
+
+struct tty_struct *get_current_tty(void)
+{
+ struct tty_struct *tty;
+ WARN_ON_ONCE(!mutex_is_locked(&tty_mutex));
+ tty = current->signal->tty;
+ /*
+ * session->tty can be changed/cleared from under us, make sure we
+ * issue the load. The obtained pointer, when not NULL, is valid as
+ * long as we hold tty_mutex.
+ */
+ barrier();
+ return tty;
+}
+EXPORT_SYMBOL_GPL(get_current_tty);
/*
* Initialize the console device. This is called *early*, so
#define TERMIOS_FLUSH 1
#define TERMIOS_WAIT 2
#define TERMIOS_TERMIO 4
+#define TERMIOS_OLD 8
/**
EXPORT_SYMBOL(tty_wait_until_sent);
-static void unset_locked_termios(struct termios *termios,
- struct termios *old,
- struct termios *locked)
+static void unset_locked_termios(struct ktermios *termios,
+ struct ktermios *old,
+ struct ktermios *locked)
{
int i;
for (i=0; i < NCCS; i++)
termios->c_cc[i] = locked->c_cc[i] ?
old->c_cc[i] : termios->c_cc[i];
+ /* FIXME: What should we do for i/ospeed */
}
+/*
+ * Routine which returns the baud rate of the tty
+ *
+ * Note that the baud_table needs to be kept in sync with the
+ * include/asm/termbits.h file.
+ */
+static const speed_t baud_table[] = {
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
+ 9600, 19200, 38400, 57600, 115200, 230400, 460800,
+#ifdef __sparc__
+ 76800, 153600, 307200, 614400, 921600
+#else
+ 500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
+ 2500000, 3000000, 3500000, 4000000
+#endif
+};
+
+#ifndef __sparc__
+static const tcflag_t baud_bits[] = {
+ B0, B50, B75, B110, B134, B150, B200, B300, B600,
+ B1200, B1800, B2400, B4800, B9600, B19200, B38400,
+ B57600, B115200, B230400, B460800, B500000, B576000,
+ B921600, B1000000, B1152000, B1500000, B2000000, B2500000,
+ B3000000, B3500000, B4000000
+};
+#else
+static const tcflag_t baud_bits[] = {
+ B0, B50, B75, B110, B134, B150, B200, B300, B600,
+ B1200, B1800, B2400, B4800, B9600, B19200, B38400,
+ B57600, B115200, B230400, B460800, B76800, B153600,
+ B307200, B614400, B921600
+};
+#endif
+
+static int n_baud_table = ARRAY_SIZE(baud_table);
+
+/**
+ * tty_termios_baud_rate
+ * @termios: termios structure
+ *
+ * Convert termios baud rate data into a speed. This should be called
+ * with the termios lock held if this termios is a terminal termios
+ * structure. May change the termios data. Device drivers can call this
+ * function but should use ->c_[io]speed directly as they are updated.
+ *
+ * Locking: none
+ */
+
+speed_t tty_termios_baud_rate(struct ktermios *termios)
+{
+ unsigned int cbaud;
+
+ cbaud = termios->c_cflag & CBAUD;
+
+#ifdef BOTHER
+ /* Magic token for arbitary speed via c_ispeed/c_ospeed */
+ if (cbaud == BOTHER)
+ return termios->c_ospeed;
+#endif
+ if (cbaud & CBAUDEX) {
+ cbaud &= ~CBAUDEX;
+
+ if (cbaud < 1 || cbaud + 15 > n_baud_table)
+ termios->c_cflag &= ~CBAUDEX;
+ else
+ cbaud += 15;
+ }
+ return baud_table[cbaud];
+}
+
+EXPORT_SYMBOL(tty_termios_baud_rate);
+
+/**
+ * tty_termios_input_baud_rate
+ * @termios: termios structure
+ *
+ * Convert termios baud rate data into a speed. This should be called
+ * with the termios lock held if this termios is a terminal termios
+ * structure. May change the termios data. Device drivers can call this
+ * function but should use ->c_[io]speed directly as they are updated.
+ *
+ * Locking: none
+ */
+
+speed_t tty_termios_input_baud_rate(struct ktermios *termios)
+{
+#ifdef IBSHIFT
+ unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD;
+
+ if (cbaud == B0)
+ return tty_termios_baud_rate(termios);
+
+ /* Magic token for arbitary speed via c_ispeed*/
+ if (cbaud == BOTHER)
+ return termios->c_ispeed;
+
+ if (cbaud & CBAUDEX) {
+ cbaud &= ~CBAUDEX;
+
+ if (cbaud < 1 || cbaud + 15 > n_baud_table)
+ termios->c_cflag &= ~(CBAUDEX << IBSHIFT);
+ else
+ cbaud += 15;
+ }
+ return baud_table[cbaud];
+#else
+ return tty_termios_baud_rate(termios);
+#endif
+}
+
+EXPORT_SYMBOL(tty_termios_input_baud_rate);
+
+#ifdef BOTHER
+
+/**
+ * tty_termios_encode_baud_rate
+ * @termios: termios structure
+ * @ispeed: input speed
+ * @ospeed: output speed
+ *
+ * Encode the speeds set into the passed termios structure. This is
+ * used as a library helper for drivers os that they can report back
+ * the actual speed selected when it differs from the speed requested
+ *
+ * For now input and output speed must agree.
+ *
+ * Locking: Caller should hold termios lock. This is already held
+ * when calling this function from the driver termios handler.
+ */
+
+void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, speed_t obaud)
+{
+ int i = 0;
+ int ifound = 0, ofound = 0;
+
+ termios->c_ispeed = ibaud;
+ termios->c_ospeed = obaud;
+
+ termios->c_cflag &= ~CBAUD;
+ /* Identical speed means no input encoding (ie B0 << IBSHIFT)*/
+ if (termios->c_ispeed == termios->c_ospeed)
+ ifound = 1;
+
+ do {
+ if (obaud == baud_table[i]) {
+ termios->c_cflag |= baud_bits[i];
+ ofound = 1;
+ /* So that if ibaud == obaud we don't set it */
+ continue;
+ }
+ if (ibaud == baud_table[i]) {
+ termios->c_cflag |= (baud_bits[i] << IBSHIFT);
+ ifound = 1;
+ }
+ }
+ while(++i < n_baud_table);
+ if (!ofound)
+ termios->c_cflag |= BOTHER;
+ if (!ifound)
+ termios->c_cflag |= (BOTHER << IBSHIFT);
+}
+
+EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
+
+#endif
+
+/**
+ * tty_get_baud_rate - get tty bit rates
+ * @tty: tty to query
+ *
+ * Returns the baud rate as an integer for this terminal. The
+ * termios lock must be held by the caller and the terminal bit
+ * flags may be updated.
+ *
+ * Locking: none
+ */
+
+speed_t tty_get_baud_rate(struct tty_struct *tty)
+{
+ speed_t baud = tty_termios_baud_rate(tty->termios);
+
+ if (baud == 38400 && tty->alt_speed) {
+ if (!tty->warned) {
+ printk(KERN_WARNING "Use of setserial/setrocket to "
+ "set SPD_* flags is deprecated\n");
+ tty->warned = 1;
+ }
+ baud = tty->alt_speed;
+ }
+
+ return baud;
+}
+
+EXPORT_SYMBOL(tty_get_baud_rate);
+
/**
* change_termios - update termios values
* @tty: tty to update
* Locking: termios_sem
*/
-static void change_termios(struct tty_struct * tty, struct termios * new_termios)
+static void change_termios(struct tty_struct * tty, struct ktermios * new_termios)
{
int canon_change;
- struct termios old_termios = *tty->termios;
+ struct ktermios old_termios = *tty->termios;
struct tty_ldisc *ld;
/*
static int set_termios(struct tty_struct * tty, void __user *arg, int opt)
{
- struct termios tmp_termios;
+ struct ktermios tmp_termios;
struct tty_ldisc *ld;
int retval = tty_check_change(tty);
if (retval)
return retval;
+ memcpy(&tmp_termios, tty->termios, sizeof(struct ktermios));
+
if (opt & TERMIOS_TERMIO) {
- memcpy(&tmp_termios, tty->termios, sizeof(struct termios));
if (user_termio_to_kernel_termios(&tmp_termios,
(struct termio __user *)arg))
return -EFAULT;
+#ifdef TCGETS2
+ } else if (opt & TERMIOS_OLD) {
+ if (user_termios_to_kernel_termios_1(&tmp_termios,
+ (struct termios __user *)arg))
+ return -EFAULT;
} else {
if (user_termios_to_kernel_termios(&tmp_termios,
- (struct termios __user *)arg))
+ (struct termios2 __user *)arg))
return -EFAULT;
}
+#else
+ } else if (user_termios_to_kernel_termios(&tmp_termios,
+ (struct termios __user *)arg))
+ return -EFAULT;
+#endif
+
+ /* If old style Bfoo values are used then load c_ispeed/c_ospeed with the real speed
+ so its unconditionally usable */
+ tmp_termios.c_ispeed = tty_termios_input_baud_rate(&tmp_termios);
+ tmp_termios.c_ospeed = tty_termios_baud_rate(&tmp_termios);
ld = tty_ldisc_ref(tty);
struct sgttyb tmp;
mutex_lock(&tty->termios_mutex);
- tmp.sg_ispeed = 0;
- tmp.sg_ospeed = 0;
+ tmp.sg_ispeed = tty->termios->c_ispeed;
+ tmp.sg_ospeed = tty->termios->c_ospeed;
tmp.sg_erase = tty->termios->c_cc[VERASE];
tmp.sg_kill = tty->termios->c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
return copy_to_user(sgttyb, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
-static void set_sgflags(struct termios * termios, int flags)
+static void set_sgflags(struct ktermios * termios, int flags)
{
termios->c_iflag = ICRNL | IXON;
termios->c_oflag = 0;
{
int retval;
struct sgttyb tmp;
- struct termios termios;
+ struct ktermios termios;
retval = tty_check_change(tty);
if (retval)
termios.c_cc[VERASE] = tmp.sg_erase;
termios.c_cc[VKILL] = tmp.sg_kill;
set_sgflags(&termios, tmp.sg_flags);
+ /* Try and encode into Bfoo format */
+#ifdef BOTHER
+ tty_termios_encode_baud_rate(&termios, termios.c_ispeed, termios.c_ospeed);
+#endif
mutex_unlock(&tty->termios_mutex);
change_termios(tty, &termios);
return 0;
case TIOCSLTC:
return set_ltchars(real_tty, p);
#endif
+ case TCSETSF:
+ return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT | TERMIOS_OLD);
+ case TCSETSW:
+ return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_OLD);
+ case TCSETS:
+ return set_termios(real_tty, p, TERMIOS_OLD);
+#ifndef TCGETS2
case TCGETS:
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
return -EFAULT;
return 0;
- case TCSETSF:
+#else
+ case TCGETS:
+ if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
+ return -EFAULT;
+ return 0;
+ case TCGETS2:
+ if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
+ return -EFAULT;
+ return 0;
+ case TCSETSF2:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT);
- case TCSETSW:
+ case TCSETSW2:
return set_termios(real_tty, p, TERMIOS_WAIT);
- case TCSETS:
+ case TCSETS2:
return set_termios(real_tty, p, 0);
+#endif
case TCGETA:
return get_termio(real_tty, p);
case TCSETAF:
int size;
down(&con_buf_sem);
- size = vcs_size(file->f_dentry->d_inode);
+ size = vcs_size(file->f_path.dentry->d_inode);
switch (orig) {
default:
up(&con_buf_sem);
static ssize_t
vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
unsigned int currcons = iminor(inode);
struct vc_data *vc;
long pos;
static ssize_t
vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
unsigned int currcons = iminor(inode);
struct vc_data *vc;
long pos;
static DEFINE_SPINLOCK(consolelock);
static DEFINE_SPINLOCK(consoleloglock);
-#ifdef CONFIG_MAGIC_SYSRQ
static int vio_sysrq_pressed;
-extern int sysrq_enabled;
-#endif
#define VIOCHAR_NUM_BUF 16
*/
num_pushed = 0;
for (index = 0; index < cevent->len; index++) {
-#ifdef CONFIG_MAGIC_SYSRQ
- if (sysrq_enabled) {
+ /*
+ * Will be optimized away if !CONFIG_MAGIC_SYSRQ:
+ */
+ if (sysrq_on()) {
/* 0x0f is the ascii character for ^O */
if (cevent->data[index] == '\x0f') {
vio_sysrq_pressed = 1;
continue;
}
}
-#endif
/*
* The sysrq sequence isn't included in this check if
* sysrq is enabled and compiled into the kernel because
if (op == NULL)
return -ENOMEM;
- get_dev_info(file->f_dentry->d_inode, &devi);
+ get_dev_info(file->f_path.dentry->d_inode, &devi);
/*
* We need to make sure we can send a request. We use
if (op == NULL)
return -ENOMEM;
- get_dev_info(file->f_dentry->d_inode, &devi);
+ get_dev_info(file->f_path.dentry->d_inode, &devi);
/*
* We need to make sure we can send a request. We use
if (op == NULL)
return -ENOMEM;
- get_dev_info(file->f_dentry->d_inode, &devi);
+ get_dev_info(file->f_path.dentry->d_inode, &devi);
down(&reqSem);
if (op == NULL)
return -ENOMEM;
- get_dev_info(file->f_dentry->d_inode, &devi);
+ get_dev_info(file->f_path.dentry->d_inode, &devi);
/* Note: We currently only support one mode! */
if ((devi.devno >= viotape_numdev) || (devi.mode)) {
return -ENOMEM;
init_completion(&op->com);
- get_dev_info(file->f_dentry->d_inode, &devi);
+ get_dev_info(file->f_path.dentry->d_inode, &devi);
if (devi.devno >= viotape_numdev) {
ret = -ENODEV;
scc_driver->init_termios = tty_std_termios;
scc_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ scc_driver->init_termios.c_ispeed = 9600;
+ scc_driver->init_termios.c_ospeed = 9600;
scc_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(scc_driver, &scc_ops);
unsigned int pin;
char value = '0';
- pin = iminor(file->f_dentry->d_inode);
+ pin = iminor(file->f_path.dentry->d_inode);
if (pin >= giu_nr_pins)
return -EBADF;
char c;
int retval = 0;
- pin = iminor(file->f_dentry->d_inode);
+ pin = iminor(file->f_path.dentry->d_inode);
if (pin >= giu_nr_pins)
return -EBADF;
if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
return 0;
- newscreen = (unsigned short *) kmalloc(new_screen_size, GFP_USER);
+ newscreen = kmalloc(new_screen_size, GFP_USER);
if (!newscreen)
return -ENOMEM;
!capable(CAP_SYS_RESOURCE))
return -EPERM;
- key_map = (ushort *) kmalloc(sizeof(plain_map),
+ key_map = kmalloc(sizeof(plain_map),
GFP_KERNEL);
if (!key_map)
return -ENOMEM;
sz = 256;
while (sz < funcbufsize - funcbufleft + delta)
sz <<= 1;
- fnw = (char *) kmalloc(sz, GFP_KERNEL);
+ fnw = kmalloc(sz, GFP_KERNEL);
if(!fnw) {
ret = -ENOMEM;
goto reterr;
switch_screen(vc);
/*
- * This can't appear below a successful kill_proc(). If it did,
+ * This can't appear below a successful kill_pid(). If it did,
* then the *blank_screen operation could occur while X, having
* received acqsig, is waking up on another processor. This
* condition can lead to overlapping accesses to the VGA range
*/
if (vc->vt_mode.mode == VT_PROCESS) {
/*
- * Send the signal as privileged - kill_proc() will
+ * Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
* is awry
*/
vc = vc_cons[fg_console].d;
if (vc->vt_mode.mode == VT_PROCESS) {
/*
- * Send the signal as privileged - kill_proc() will
+ * Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
* is awry
*/
{
int res;
- if (at91wdt_miscdev.dev)
+ if (at91wdt_miscdev.parent)
return -EBUSY;
- at91wdt_miscdev.dev = &pdev->dev;
+ at91wdt_miscdev.parent = &pdev->dev;
res = misc_register(&at91wdt_miscdev);
if (res)
res = misc_deregister(&at91wdt_miscdev);
if (!res)
- at91wdt_miscdev.dev = NULL;
+ at91wdt_miscdev.parent = NULL;
return res;
}
goto err_free;
}
- mpcore_wdt_miscdev.dev = &dev->dev;
+ mpcore_wdt_miscdev.parent = &dev->dev;
ret = misc_register(&mpcore_wdt_miscdev);
if (ret) {
dev_printk(KERN_ERR, _dev, "cannot register miscdev on minor=%d (err=%d)\n",
omap_wdt_disable();
omap_wdt_adjust_timeout(timer_margin);
- omap_wdt_miscdev.dev = &pdev->dev;
+ omap_wdt_miscdev.parent = &pdev->dev;
ret = misc_register(&omap_wdt_miscdev);
if (ret)
goto fail;
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/mutex.h>
+#include <linux/hid.h> /* For HID_REQ_SET_REPORT & HID_DT_REPORT */
#ifdef CONFIG_USB_DEBUG
#define CMD_ENABLE_WATCHDOG 0x30 /* Enable / Disable Watchdog */
#define CMD_DISABLE_WATCHDOG CMD_ENABLE_WATCHDOG
-/* Some defines that I like to be somewhere else like include/linux/usb_hid.h */
-#define HID_REQ_SET_REPORT 0x09
-#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02)
-
/* We can only use 1 card due to the /dev/watchdog restriction */
static int cards_found;
/* Function prototypes */
-static irqreturn_t wdt_gpi_irqhdl(int, void *, struct pt_regs *);
+static irqreturn_t wdt_gpi_irqhdl(int, void *);
static void wdt_gpi_start(void);
static void wdt_gpi_stop(void);
static void wdt_gpi_set_timeout(unsigned int);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started");
+/* Kernel interfaces */
+static struct file_operations fops = {
+ .owner = THIS_MODULE,
+ .open = wdt_gpi_open,
+ .release = wdt_gpi_release,
+ .write = wdt_gpi_write,
+ .unlocked_ioctl = wdt_gpi_ioctl,
+};
+
+static struct miscdevice miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = wdt_gpi_name,
+ .fops = &fops,
+};
+
+static struct notifier_block wdt_gpi_shutdown = {
+ .notifier_call = wdt_gpi_notify,
+};
+
+
/* Interrupt handler */
-static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt, struct pt_regs *regs)
+static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt)
{
if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1))
return IRQ_NONE;
}
-/* Kernel interfaces */
-static struct file_operations fops = {
- .owner = THIS_MODULE,
- .open = wdt_gpi_open,
- .release = wdt_gpi_release,
- .write = wdt_gpi_write,
- .unlocked_ioctl = wdt_gpi_ioctl,
-};
-
-static struct miscdevice miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = wdt_gpi_name,
- .fops = &fops,
-};
-
-static struct notifier_block wdt_gpi_shutdown = {
- .notifier_call = wdt_gpi_notify,
-};
-
-
/* Init & exit procedures */
static const struct resource *
wdt_gpi_get_resource(struct platform_device *pdv, const char *name,
#ifdef CONFIG_PCI
-static int acpi_pm_good;
+static int __devinitdata acpi_pm_good;
static int __init acpi_pm_good_setup(char *__str)
{
- acpi_pm_good = 1;
- return 1;
+ acpi_pm_good = 1;
+ return 1;
}
__setup("acpi_pm_good", acpi_pm_good_setup);
acpi_pm_check_graylist);
#endif
+#ifndef CONFIG_X86_64
+#include "mach_timer.h"
+#define PMTMR_EXPECTED_RATE \
+ ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10))
+/*
+ * Some boards have the PMTMR running way too fast. We check
+ * the PMTMR rate against PIT channel 2 to catch these cases.
+ */
+static int verify_pmtmr_rate(void)
+{
+ u32 value1, value2;
+ unsigned long count, delta;
+
+ mach_prepare_counter();
+ value1 = read_pmtmr();
+ mach_countup(&count);
+ value2 = read_pmtmr();
+ delta = (value2 - value1) & ACPI_PM_MASK;
+
+ /* Check that the PMTMR delta is within 5% of what we expect */
+ if (delta < (PMTMR_EXPECTED_RATE * 19) / 20 ||
+ delta > (PMTMR_EXPECTED_RATE * 21) / 20) {
+ printk(KERN_INFO "PM-Timer running at invalid rate: %lu%% "
+ "of normal - aborting.\n",
+ 100UL * delta / PMTMR_EXPECTED_RATE);
+ return -1;
+ }
+
+ return 0;
+}
+#else
+#define verify_pmtmr_rate() (0)
+#endif
static int __init init_acpi_pm_clocksource(void)
{
return -ENODEV;
pm_good:
+ if (verify_pmtmr_rate() != 0)
+ return -ENODEV;
+
return clocksource_register(&clocksource_acpi_pm);
}
#include <linux/completion.h>
#include <linux/mutex.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "cpufreq-core", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
+ "cpufreq-core", msg)
/**
* The "cpufreq driver" - the arch- or hardware-dependent low
spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
}
-void cpufreq_debug_printk(unsigned int type, const char *prefix, const char *fmt, ...)
+void cpufreq_debug_printk(unsigned int type, const char *prefix,
+ const char *fmt, ...)
{
char s[256];
va_list args;
WARN_ON(!prefix);
if (type & debug) {
spin_lock_irqsave(&disable_ratelimit_lock, flags);
- if (!disable_ratelimit && debug_ratelimit && !printk_ratelimit()) {
+ if (!disable_ratelimit && debug_ratelimit
+ && !printk_ratelimit()) {
spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
return;
}
module_param(debug, uint, 0644);
-MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core, 2 to debug drivers, and 4 to debug governors.");
+MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core,"
+ " 2 to debug drivers, and 4 to debug governors.");
module_param(debug_ratelimit, uint, 0644);
-MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging: set to 0 to disable ratelimiting.");
+MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging:"
+ " set to 0 to disable ratelimiting.");
#else /* !CONFIG_CPU_FREQ_DEBUG */
if (!l_p_j_ref_freq) {
l_p_j_ref = loops_per_jiffy;
l_p_j_ref_freq = ci->old;
- dprintk("saving %lu as reference value for loops_per_jiffy; freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
+ dprintk("saving %lu as reference value for loops_per_jiffy;"
+ "freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
}
if ((val == CPUFREQ_PRECHANGE && ci->old < ci->new) ||
(val == CPUFREQ_POSTCHANGE && ci->old > ci->new) ||
(val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
- loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq, ci->new);
- dprintk("scaling loops_per_jiffy to %lu for frequency %u kHz\n", loops_per_jiffy, ci->new);
+ loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
+ ci->new);
+ dprintk("scaling loops_per_jiffy to %lu"
+ "for frequency %u kHz\n", loops_per_jiffy, ci->new);
}
}
#else
-static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) { return; }
+static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
+{
+ return;
+}
#endif
if (!strnicmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_PERFORMANCE;
err = 0;
- } else if (!strnicmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) {
+ } else if (!strnicmp(str_governor, "powersave",
+ CPUFREQ_NAME_LEN)) {
*policy = CPUFREQ_POLICY_POWERSAVE;
err = 0;
}
t = __find_governor(str_governor);
if (t == NULL) {
- char *name = kasprintf(GFP_KERNEL, "cpufreq_%s", str_governor);
+ char *name = kasprintf(GFP_KERNEL, "cpufreq_%s",
+ str_governor);
if (name) {
int ret;
/**
- * cpufreq_per_cpu_attr_read() / show_##file_name() - print out cpufreq information
+ * cpufreq_per_cpu_attr_read() / show_##file_name() -
+ * print out cpufreq information
*
* Write out information from cpufreq_driver->policy[cpu]; object must be
* "unsigned int".
show_one(scaling_max_freq, max);
show_one(scaling_cur_freq, cur);
-static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_policy *policy);
+static int __cpufreq_set_policy(struct cpufreq_policy *data,
+ struct cpufreq_policy *policy);
/**
* cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access
/**
* show_cpuinfo_cur_freq - current CPU frequency as detected by hardware
*/
-static ssize_t show_cpuinfo_cur_freq (struct cpufreq_policy * policy, char *buf)
+static ssize_t show_cpuinfo_cur_freq (struct cpufreq_policy * policy,
+ char *buf)
{
unsigned int cur_freq = cpufreq_get(policy->cpu);
if (!cur_freq)
/**
* show_scaling_governor - show the current policy for the specified CPU
*/
-static ssize_t show_scaling_governor (struct cpufreq_policy * policy, char *buf)
+static ssize_t show_scaling_governor (struct cpufreq_policy * policy,
+ char *buf)
{
if(policy->policy == CPUFREQ_POLICY_POWERSAVE)
return sprintf(buf, "powersave\n");
if (ret != 1)
return -EINVAL;
- if (cpufreq_parse_governor(str_governor, &new_policy.policy, &new_policy.governor))
+ if (cpufreq_parse_governor(str_governor, &new_policy.policy,
+ &new_policy.governor))
return -EINVAL;
lock_cpu_hotplug();
unlock_cpu_hotplug();
- return ret ? ret : count;
+ if (ret)
+ return ret;
+ else
+ return count;
}
/**
/**
* show_scaling_available_governors - show the available CPUfreq governors
*/
-static ssize_t show_scaling_available_governors (struct cpufreq_policy * policy,
+static ssize_t show_scaling_available_governors (struct cpufreq_policy *policy,
char *buf)
{
ssize_t i = 0;
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
- ret = fattr->show ? fattr->show(policy,buf) : -EIO;
+ if (fattr->show)
+ ret = fattr->show(policy, buf);
+ else
+ ret = -EIO;
+
cpufreq_cpu_put(policy);
return ret;
}
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
- ret = fattr->store ? fattr->store(policy,buf,count) : -EIO;
+ if (fattr->store)
+ ret = fattr->store(policy, buf, count);
+ else
+ ret = -EIO;
+
cpufreq_cpu_put(policy);
return ret;
}
* We adjust to current frequency first, and need to clean up later. So either call
* to cpufreq_update_policy() or schedule handle_update()).
*/
-static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigned int new_freq)
+static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
+ unsigned int new_freq)
{
struct cpufreq_freqs freqs;
unsigned int cpufreq_quick_get(unsigned int cpu)
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- unsigned int ret = 0;
+ unsigned int ret_freq = 0;
if (policy) {
mutex_lock(&policy->lock);
- ret = policy->cur;
+ ret_freq = policy->cur;
mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
}
- return (ret);
+ return (ret_freq);
}
EXPORT_SYMBOL(cpufreq_quick_get);
unsigned int cpufreq_get(unsigned int cpu)
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- unsigned int ret = 0;
+ unsigned int ret_freq = 0;
if (!policy)
return 0;
mutex_lock(&policy->lock);
- ret = cpufreq_driver->get(cpu);
+ ret_freq = cpufreq_driver->get(cpu);
- if (ret && policy->cur && !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
- /* verify no discrepancy between actual and saved value exists */
- if (unlikely(ret != policy->cur)) {
- cpufreq_out_of_sync(cpu, policy->cur, ret);
+ if (ret_freq && policy->cur &&
+ !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
+ /* verify no discrepancy between actual and
+ saved value exists */
+ if (unlikely(ret_freq != policy->cur)) {
+ cpufreq_out_of_sync(cpu, policy->cur, ret_freq);
schedule_work(&policy->update);
}
}
out:
cpufreq_cpu_put(policy);
- return (ret);
+ return (ret_freq);
}
EXPORT_SYMBOL(cpufreq_get);
static int cpufreq_suspend(struct sys_device * sysdev, pm_message_t pmsg)
{
int cpu = sysdev->id;
- unsigned int ret = 0;
+ int ret = 0;
unsigned int cur_freq = 0;
struct cpufreq_policy *cpu_policy;
static int cpufreq_resume(struct sys_device * sysdev)
{
int cpu = sysdev->id;
- unsigned int ret = 0;
+ int ret = 0;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
}
EXPORT_SYMBOL_GPL(cpufreq_driver_target);
+int cpufreq_driver_getavg(struct cpufreq_policy *policy)
+{
+ int ret = 0;
+
+ policy = cpufreq_cpu_get(policy->cpu);
+ if (!policy)
+ return -EINVAL;
+
+ mutex_lock(&policy->lock);
+
+ if (cpu_online(policy->cpu) && cpufreq_driver->getavg)
+ ret = cpufreq_driver->getavg(policy->cpu);
+
+ mutex_unlock(&policy->lock);
+
+ cpufreq_cpu_put(policy);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_getavg);
+
/*
* Locking: Must be called with the lock_cpu_hotplug() lock held
* when "event" is CPUFREQ_GOV_LIMITS
*/
-static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
+static int __cpufreq_governor(struct cpufreq_policy *policy,
+ unsigned int event)
{
int ret;
if (!try_module_get(policy->governor->owner))
return -EINVAL;
- dprintk("__cpufreq_governor for CPU %u, event %u\n", policy->cpu, event);
+ dprintk("__cpufreq_governor for CPU %u, event %u\n",
+ policy->cpu, event);
ret = policy->governor->governor(policy, event);
- /* we keep one module reference alive for each CPU governed by this CPU */
+ /* we keep one module reference alive for
+ each CPU governed by this CPU */
if ((event != CPUFREQ_GOV_START) || ret)
module_put(policy->governor->owner);
if ((event == CPUFREQ_GOV_STOP) && !ret)
/*
+ * data : current policy.
+ * policy : policy to be set.
* Locking: Must be called with the lock_cpu_hotplug() lock held
*/
-static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_policy *policy)
+static int __cpufreq_set_policy(struct cpufreq_policy *data,
+ struct cpufreq_policy *policy)
{
int ret = 0;
dprintk("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
policy->min, policy->max);
- memcpy(&policy->cpuinfo, &data->cpuinfo, sizeof(struct cpufreq_cpuinfo));
+ memcpy(&policy->cpuinfo, &data->cpuinfo,
+ sizeof(struct cpufreq_cpuinfo));
if (policy->min > data->min && policy->min > policy->max) {
ret = -EINVAL;
data->min = policy->min;
data->max = policy->max;
- dprintk("new min and max freqs are %u - %u kHz\n", data->min, data->max);
+ dprintk("new min and max freqs are %u - %u kHz\n",
+ data->min, data->max);
if (cpufreq_driver->setpolicy) {
data->policy = policy->policy;
data->governor = policy->governor;
if (__cpufreq_governor(data, CPUFREQ_GOV_START)) {
/* new governor failed, so re-start old one */
- dprintk("starting governor %s failed\n", data->governor->name);
+ dprintk("starting governor %s failed\n",
+ data->governor->name);
if (old_gov) {
data->governor = old_gov;
- __cpufreq_governor(data, CPUFREQ_GOV_START);
+ __cpufreq_governor(data,
+ CPUFREQ_GOV_START);
}
ret = -EINVAL;
goto error_out;
data->cur = policy.cur;
} else {
if (data->cur != policy.cur)
- cpufreq_out_of_sync(cpu, data->cur, policy.cur);
+ cpufreq_out_of_sync(cpu, data->cur,
+ policy.cur);
}
}
/* if all ->init() calls failed, unregister */
if (ret) {
- dprintk("no CPU initialized for driver %s\n", driver_data->name);
- sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
+ dprintk("no CPU initialized for driver %s\n",
+ driver_data->name);
+ sysdev_driver_unregister(&cpu_sysdev_class,
+ &cpufreq_sysdev_driver);
spin_lock_irqsave(&cpufreq_driver_lock, flags);
cpufreq_driver = NULL;
* latency of the processor. The governor will work on any processor with
* transition latency <= 10mS, using appropriate sampling
* rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
+ * For CPUs with transition latency > 10mS (mostly drivers
+ * with CPUFREQ_ETERNAL), this governor will not work.
* All times here are in uS.
*/
static unsigned int def_sampling_rate;
#define MIN_SAMPLING_RATE_RATIO (2)
/* for correct statistics, we need at least 10 ticks between each measure */
-#define MIN_STAT_SAMPLING_RATE (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
-#define MIN_SAMPLING_RATE (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
+#define MIN_STAT_SAMPLING_RATE \
+ (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
+#define MIN_SAMPLING_RATE \
+ (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000)
#define DEF_SAMPLING_DOWN_FACTOR (1)
static inline unsigned int get_cpu_idle_time(unsigned int cpu)
{
- return kstat_cpu(cpu).cpustat.idle +
+ unsigned int add_nice = 0, ret;
+
+ if (dbs_tuners_ins.ignore_nice)
+ add_nice = kstat_cpu(cpu).cpustat.nice;
+
+ ret = kstat_cpu(cpu).cpustat.idle +
kstat_cpu(cpu).cpustat.iowait +
- ( dbs_tuners_ins.ignore_nice ?
- kstat_cpu(cpu).cpustat.nice :
- 0);
+ add_nice;
+
+ return ret;
}
/************************** sysfs interface ************************/
unsigned int cpu = policy->cpu;
struct cpu_dbs_info_s *this_dbs_info;
unsigned int j;
+ int rc;
this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
break;
mutex_lock(&dbs_mutex);
+
+ rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
+ if (rc) {
+ mutex_unlock(&dbs_mutex);
+ return rc;
+ }
+
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
this_dbs_info->enable = 1;
this_dbs_info->down_skip = 0;
this_dbs_info->requested_freq = policy->cur;
- sysfs_create_group(&policy->kobj, &dbs_attr_group);
+
dbs_enable++;
/*
* Start the timerschedule work, when this governor
static unsigned int def_sampling_rate;
#define MIN_SAMPLING_RATE_RATIO (2)
/* for correct statistics, we need at least 10 ticks between each measure */
-#define MIN_STAT_SAMPLING_RATE (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
-#define MIN_SAMPLING_RATE (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
+#define MIN_STAT_SAMPLING_RATE \
+ (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
+#define MIN_SAMPLING_RATE \
+ (def_sampling_rate / MIN_SAMPLING_RATE_RATIO)
#define MAX_SAMPLING_RATE (500 * def_sampling_rate)
#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000)
#define TRANSITION_LATENCY_LIMIT (10 * 1000)
ret = sscanf(buf, "%u", &input);
mutex_lock(&dbs_mutex);
- if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) {
+ if (ret != 1 || input > MAX_SAMPLING_RATE
+ || input < MIN_SAMPLING_RATE) {
mutex_unlock(&dbs_mutex);
return -EINVAL;
}
* policy. To be safe, we focus 10 points under the threshold.
*/
if (load < (dbs_tuners_ins.up_threshold - 10)) {
- unsigned int freq_next = (policy->cur * load) /
+ unsigned int freq_next, freq_cur;
+
+ freq_cur = cpufreq_driver_getavg(policy);
+ if (!freq_cur)
+ freq_cur = policy->cur;
+
+ freq_next = (freq_cur * load) /
(dbs_tuners_ins.up_threshold - 10);
+
if (!dbs_tuners_ins.powersave_bias) {
__cpufreq_driver_target(policy, freq_next,
CPUFREQ_RELATION_L);
unsigned int cpu = policy->cpu;
struct cpu_dbs_info_s *this_dbs_info;
unsigned int j;
+ int rc;
this_dbs_info = &per_cpu(cpu_dbs_info, cpu);
if (dbs_enable == 1) {
kondemand_wq = create_workqueue("kondemand");
if (!kondemand_wq) {
- printk(KERN_ERR "Creation of kondemand failed\n");
+ printk(KERN_ERR
+ "Creation of kondemand failed\n");
dbs_enable--;
mutex_unlock(&dbs_mutex);
return -ENOSPC;
}
}
+
+ rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
+ if (rc) {
+ if (dbs_enable == 1)
+ destroy_workqueue(kondemand_wq);
+ dbs_enable--;
+ mutex_unlock(&dbs_mutex);
+ return rc;
+ }
+
for_each_cpu_mask(j, policy->cpus) {
struct cpu_dbs_info_s *j_dbs_info;
j_dbs_info = &per_cpu(cpu_dbs_info, j);
j_dbs_info->prev_cpu_wall = get_jiffies_64();
}
this_dbs_info->enable = 1;
- sysfs_create_group(&policy->kobj, &dbs_attr_group);
/*
* Start the timerschedule work, when this governor
* is used for first time
#include <linux/cpufreq.h>
#include <linux/init.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "performance", msg)
static int cpufreq_governor_performance(struct cpufreq_policy *policy,
switch (event) {
case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS:
- dprintk("setting to %u kHz because of event %u\n", policy->max, event);
- __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H);
+ dprintk("setting to %u kHz because of event %u\n",
+ policy->max, event);
+ __cpufreq_driver_target(policy, policy->max,
+ CPUFREQ_RELATION_H);
break;
default:
break;
#include <linux/cpufreq.h>
#include <linux/init.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "powersave", msg)
static int cpufreq_governor_powersave(struct cpufreq_policy *policy,
unsigned int event)
switch (event) {
case CPUFREQ_GOV_START:
case CPUFREQ_GOV_LIMITS:
- dprintk("setting to %u kHz because of event %u\n", policy->min, event);
- __cpufreq_driver_target(policy, policy->min, CPUFREQ_RELATION_L);
+ dprintk("setting to %u kHz because of event %u\n",
+ policy->min, event);
+ __cpufreq_driver_target(policy, policy->min,
+ CPUFREQ_RELATION_L);
break;
default:
break;
register_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
for_each_online_cpu(cpu) {
- cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_ONLINE,
- (void *)(long)cpu);
+ cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier,
+ CPU_ONLINE, (void *)(long)cpu);
}
return 0;
}
unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
lock_cpu_hotplug();
for_each_online_cpu(cpu) {
- cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_DEAD,
- (void *)(long)cpu);
+ cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier,
+ CPU_DEAD, (void *)(long)cpu);
}
unlock_cpu_hotplug();
}
MODULE_AUTHOR ("Zou Nan hai <nanhai.zou@intel.com>");
-MODULE_DESCRIPTION ("'cpufreq_stats' - A driver to export cpufreq stats through sysfs filesystem");
+MODULE_DESCRIPTION ("'cpufreq_stats' - A driver to export cpufreq stats"
+ "through sysfs filesystem");
MODULE_LICENSE ("GPL");
module_init(cpufreq_stats_init);
unsigned int event)
{
unsigned int cpu = policy->cpu;
+ int rc = 0;
+
switch (event) {
case CPUFREQ_GOV_START:
if (!cpu_online(cpu))
return -EINVAL;
BUG_ON(!policy->cur);
mutex_lock(&userspace_mutex);
+ rc = sysfs_create_file (&policy->kobj,
+ &freq_attr_scaling_setspeed.attr);
+ if (rc)
+ goto start_out;
+
cpu_is_managed[cpu] = 1;
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
cpu_cur_freq[cpu] = policy->cur;
cpu_set_freq[cpu] = policy->cur;
- sysfs_create_file (&policy->kobj, &freq_attr_scaling_setspeed.attr);
dprintk("managing cpu %u started (%u - %u kHz, currently %u kHz)\n", cpu, cpu_min_freq[cpu], cpu_max_freq[cpu], cpu_cur_freq[cpu]);
+start_out:
mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_STOP:
mutex_unlock(&userspace_mutex);
break;
}
- return 0;
+ return rc;
}
#include <linux/init.h>
#include <linux/cpufreq.h>
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
+#define dprintk(msg...) \
+ cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "freq-table", msg)
/*********************************************************************
* FREQUENCY TABLE HELPERS *
continue;
}
- dprintk("table entry %u: %u kHz, %u index\n", i, freq, table[i].index);
+ dprintk("table entry %u: %u kHz, %u index\n",
+ i, freq, table[i].index);
if (freq < min_freq)
min_freq = freq;
if (freq > max_freq)
unsigned int i;
unsigned int count = 0;
- dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu);
+ dprintk("request for verification of policy (%u - %u kHz) for cpu %u\n",
+ policy->min, policy->max, policy->cpu);
if (!cpu_online(policy->cpu))
return -EINVAL;
- cpufreq_verify_within_limits(policy,
- policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
unsigned int freq = table[i].frequency;
if (!count)
policy->max = next_larger;
- cpufreq_verify_within_limits(policy,
- policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
- dprintk("verification lead to (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu);
+ dprintk("verification lead to (%u - %u kHz) for cpu %u\n",
+ policy->min, policy->max, policy->cpu);
return 0;
}
};
unsigned int i;
- dprintk("request for target %u kHz (relation: %u) for cpu %u\n", target_freq, relation, policy->cpu);
+ dprintk("request for target %u kHz (relation: %u) for cpu %u\n",
+ target_freq, relation, policy->cpu);
switch (relation) {
case CPUFREQ_RELATION_H:
}
struct freq_attr cpufreq_freq_attr_scaling_available_freqs = {
- .attr = { .name = "scaling_available_frequencies", .mode = 0444, .owner=THIS_MODULE },
+ .attr = { .name = "scaling_available_frequencies",
+ .mode = 0444,
+ .owner=THIS_MODULE
+ },
.show = show_available_freqs,
};
EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
config CRYPTO_DEV_GEODE
tristate "Support for the Geode LX AES engine"
- depends on CRYPTO && X86_32
+ depends on CRYPTO && X86_32 && PCI
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
default m
printk ("FC: Bad magic from REPORT_AL_MAP on %s - %08x\n", fc->name, p->magic);
fc->state = FC_STATE_OFFLINE;
} else {
- fc->posmap = (fcp_posmap *)kzalloc(sizeof(fcp_posmap)+p->len, GFP_KERNEL);
+ fc->posmap = kzalloc(sizeof(fcp_posmap)+p->len, GFP_KERNEL);
if (!fc->posmap) {
printk("FC: Not enough memory, offlining channel\n");
fc->state = FC_STATE_OFFLINE;
for (i = fc->can_queue; i < fc->scsi_bitmap_end; i++)
set_bit (i, fc->scsi_bitmap);
fc->scsi_free = fc->can_queue;
- fc->cmd_slots = (fcp_cmnd **)kzalloc(slots * sizeof(fcp_cmnd*), GFP_KERNEL);
+ fc->cmd_slots = kzalloc(slots * sizeof(fcp_cmnd*), GFP_KERNEL);
fc->abort_count = 0;
} else {
fc->scsi_name[0] = 0;
DECLARE_MUTEX_LOCKED(sem);
if (!fc->rst_pkt) {
- fc->rst_pkt = (struct scsi_cmnd *) kmalloc(sizeof(SCpnt), GFP_KERNEL);
+ fc->rst_pkt = kmalloc(sizeof(SCpnt), GFP_KERNEL);
if (!fc->rst_pkt) return FAILED;
fcmd = FCP_CMND(fc->rst_pkt);
logi *l;
int status;
- l = (logi *)kzalloc(2 * sizeof(logi), GFP_KERNEL);
+ l = kzalloc(2 * sizeof(logi), GFP_KERNEL);
if (!l) return -ENOMEM;
l->code = LS_PLOGI;
memcpy (&l->nport_wwn, &fc->wwn_nport, sizeof(fc_wwn));
prli *p;
int status;
- p = (prli *)kzalloc(2 * sizeof(prli), GFP_KERNEL);
+ p = kzalloc(2 * sizeof(prli), GFP_KERNEL);
if (!p) return -ENOMEM;
p->code = LS_PRLI;
p->params[0] = 0x08002000;
--- /dev/null
+#
+# HID driver configuration
+#
+menu "HID Devices"
+ depends on INPUT
+
+config HID
+ tristate "Generic HID support"
+ default y
+ ---help---
+ Say Y here if you want generic HID support to connect keyboards,
+ mice, joysticks, graphic tablets, or any other HID based devices
+ to your computer. You also need to select particular types of
+ HID devices you want to compile support for, in the particular
+ driver menu (USB, Bluetooth)
+
+endmenu
+
--- /dev/null
+#
+# Makefile for the HID driver
+#
+
+# Multipart objects.
+hid-objs := hid-core.o hid-input.o
+
+# Optional parts of multipart objects.
+
+obj-$(CONFIG_HID) += hid.o
+
+ifeq ($(CONFIG_INPUT_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
--- /dev/null
+/*
+ * HID support for Linux
+ *
+ * Copyright (c) 1999 Andreas Gal
+ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ * Copyright (c) 2006 Jiri Kosina
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#include <linux/input.h>
+#include <linux/wait.h>
+
+#undef DEBUG
+#undef DEBUG_DATA
+
+#include <linux/hid.h>
+#include <linux/hiddev.h>
+
+/*
+ * Version Information
+ */
+
+#define DRIVER_VERSION "v2.6"
+#define DRIVER_AUTHOR "Andreas Gal, Vojtech Pavlik"
+#define DRIVER_DESC "USB HID core driver"
+#define DRIVER_LICENSE "GPL"
+
+/*
+ * Module parameters.
+ */
+
+static unsigned int hid_mousepoll_interval;
+module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
+MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
+
+/*
+ * Register a new report for a device.
+ */
+
+static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
+{
+ struct hid_report_enum *report_enum = device->report_enum + type;
+ struct hid_report *report;
+
+ if (report_enum->report_id_hash[id])
+ return report_enum->report_id_hash[id];
+
+ if (!(report = kzalloc(sizeof(struct hid_report), GFP_KERNEL)))
+ return NULL;
+
+ if (id != 0)
+ report_enum->numbered = 1;
+
+ report->id = id;
+ report->type = type;
+ report->size = 0;
+ report->device = device;
+ report_enum->report_id_hash[id] = report;
+
+ list_add_tail(&report->list, &report_enum->report_list);
+
+ return report;
+}
+
+/*
+ * Register a new field for this report.
+ */
+
+static struct hid_field *hid_register_field(struct hid_report *report, unsigned usages, unsigned values)
+{
+ struct hid_field *field;
+
+ if (report->maxfield == HID_MAX_FIELDS) {
+ dbg("too many fields in report");
+ return NULL;
+ }
+
+ if (!(field = kzalloc(sizeof(struct hid_field) + usages * sizeof(struct hid_usage)
+ + values * sizeof(unsigned), GFP_KERNEL))) return NULL;
+
+ field->index = report->maxfield++;
+ report->field[field->index] = field;
+ field->usage = (struct hid_usage *)(field + 1);
+ field->value = (unsigned *)(field->usage + usages);
+ field->report = report;
+
+ return field;
+}
+
+/*
+ * Open a collection. The type/usage is pushed on the stack.
+ */
+
+static int open_collection(struct hid_parser *parser, unsigned type)
+{
+ struct hid_collection *collection;
+ unsigned usage;
+
+ usage = parser->local.usage[0];
+
+ if (parser->collection_stack_ptr == HID_COLLECTION_STACK_SIZE) {
+ dbg("collection stack overflow");
+ return -1;
+ }
+
+ if (parser->device->maxcollection == parser->device->collection_size) {
+ collection = kmalloc(sizeof(struct hid_collection) *
+ parser->device->collection_size * 2, GFP_KERNEL);
+ if (collection == NULL) {
+ dbg("failed to reallocate collection array");
+ return -1;
+ }
+ memcpy(collection, parser->device->collection,
+ sizeof(struct hid_collection) *
+ parser->device->collection_size);
+ memset(collection + parser->device->collection_size, 0,
+ sizeof(struct hid_collection) *
+ parser->device->collection_size);
+ kfree(parser->device->collection);
+ parser->device->collection = collection;
+ parser->device->collection_size *= 2;
+ }
+
+ parser->collection_stack[parser->collection_stack_ptr++] =
+ parser->device->maxcollection;
+
+ collection = parser->device->collection +
+ parser->device->maxcollection++;
+ collection->type = type;
+ collection->usage = usage;
+ collection->level = parser->collection_stack_ptr - 1;
+
+ if (type == HID_COLLECTION_APPLICATION)
+ parser->device->maxapplication++;
+
+ return 0;
+}
+
+/*
+ * Close a collection.
+ */
+
+static int close_collection(struct hid_parser *parser)
+{
+ if (!parser->collection_stack_ptr) {
+ dbg("collection stack underflow");
+ return -1;
+ }
+ parser->collection_stack_ptr--;
+ return 0;
+}
+
+/*
+ * Climb up the stack, search for the specified collection type
+ * and return the usage.
+ */
+
+static unsigned hid_lookup_collection(struct hid_parser *parser, unsigned type)
+{
+ int n;
+ for (n = parser->collection_stack_ptr - 1; n >= 0; n--)
+ if (parser->device->collection[parser->collection_stack[n]].type == type)
+ return parser->device->collection[parser->collection_stack[n]].usage;
+ return 0; /* we know nothing about this usage type */
+}
+
+/*
+ * Add a usage to the temporary parser table.
+ */
+
+static int hid_add_usage(struct hid_parser *parser, unsigned usage)
+{
+ if (parser->local.usage_index >= HID_MAX_USAGES) {
+ dbg("usage index exceeded");
+ return -1;
+ }
+ parser->local.usage[parser->local.usage_index] = usage;
+ parser->local.collection_index[parser->local.usage_index] =
+ parser->collection_stack_ptr ?
+ parser->collection_stack[parser->collection_stack_ptr - 1] : 0;
+ parser->local.usage_index++;
+ return 0;
+}
+
+/*
+ * Register a new field for this report.
+ */
+
+static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsigned flags)
+{
+ struct hid_report *report;
+ struct hid_field *field;
+ int usages;
+ unsigned offset;
+ int i;
+
+ if (!(report = hid_register_report(parser->device, report_type, parser->global.report_id))) {
+ dbg("hid_register_report failed");
+ return -1;
+ }
+
+ if (parser->global.logical_maximum < parser->global.logical_minimum) {
+ dbg("logical range invalid %d %d", parser->global.logical_minimum, parser->global.logical_maximum);
+ return -1;
+ }
+
+ offset = report->size;
+ report->size += parser->global.report_size * parser->global.report_count;
+
+ if (!parser->local.usage_index) /* Ignore padding fields */
+ return 0;
+
+ usages = max_t(int, parser->local.usage_index, parser->global.report_count);
+
+ if ((field = hid_register_field(report, usages, parser->global.report_count)) == NULL)
+ return 0;
+
+ field->physical = hid_lookup_collection(parser, HID_COLLECTION_PHYSICAL);
+ field->logical = hid_lookup_collection(parser, HID_COLLECTION_LOGICAL);
+ field->application = hid_lookup_collection(parser, HID_COLLECTION_APPLICATION);
+
+ for (i = 0; i < usages; i++) {
+ int j = i;
+ /* Duplicate the last usage we parsed if we have excess values */
+ if (i >= parser->local.usage_index)
+ j = parser->local.usage_index - 1;
+ field->usage[i].hid = parser->local.usage[j];
+ field->usage[i].collection_index =
+ parser->local.collection_index[j];
+ }
+
+ field->maxusage = usages;
+ field->flags = flags;
+ field->report_offset = offset;
+ field->report_type = report_type;
+ field->report_size = parser->global.report_size;
+ field->report_count = parser->global.report_count;
+ field->logical_minimum = parser->global.logical_minimum;
+ field->logical_maximum = parser->global.logical_maximum;
+ field->physical_minimum = parser->global.physical_minimum;
+ field->physical_maximum = parser->global.physical_maximum;
+ field->unit_exponent = parser->global.unit_exponent;
+ field->unit = parser->global.unit;
+
+ return 0;
+}
+
+/*
+ * Read data value from item.
+ */
+
+static u32 item_udata(struct hid_item *item)
+{
+ switch (item->size) {
+ case 1: return item->data.u8;
+ case 2: return item->data.u16;
+ case 4: return item->data.u32;
+ }
+ return 0;
+}
+
+static s32 item_sdata(struct hid_item *item)
+{
+ switch (item->size) {
+ case 1: return item->data.s8;
+ case 2: return item->data.s16;
+ case 4: return item->data.s32;
+ }
+ return 0;
+}
+
+/*
+ * Process a global item.
+ */
+
+static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
+{
+ switch (item->tag) {
+
+ case HID_GLOBAL_ITEM_TAG_PUSH:
+
+ if (parser->global_stack_ptr == HID_GLOBAL_STACK_SIZE) {
+ dbg("global enviroment stack overflow");
+ return -1;
+ }
+
+ memcpy(parser->global_stack + parser->global_stack_ptr++,
+ &parser->global, sizeof(struct hid_global));
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_POP:
+
+ if (!parser->global_stack_ptr) {
+ dbg("global enviroment stack underflow");
+ return -1;
+ }
+
+ memcpy(&parser->global, parser->global_stack + --parser->global_stack_ptr,
+ sizeof(struct hid_global));
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_USAGE_PAGE:
+ parser->global.usage_page = item_udata(item);
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM:
+ parser->global.logical_minimum = item_sdata(item);
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM:
+ if (parser->global.logical_minimum < 0)
+ parser->global.logical_maximum = item_sdata(item);
+ else
+ parser->global.logical_maximum = item_udata(item);
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM:
+ parser->global.physical_minimum = item_sdata(item);
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM:
+ if (parser->global.physical_minimum < 0)
+ parser->global.physical_maximum = item_sdata(item);
+ else
+ parser->global.physical_maximum = item_udata(item);
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT:
+ parser->global.unit_exponent = item_sdata(item);
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_UNIT:
+ parser->global.unit = item_udata(item);
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_REPORT_SIZE:
+ if ((parser->global.report_size = item_udata(item)) > 32) {
+ dbg("invalid report_size %d", parser->global.report_size);
+ return -1;
+ }
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_REPORT_COUNT:
+ if ((parser->global.report_count = item_udata(item)) > HID_MAX_USAGES) {
+ dbg("invalid report_count %d", parser->global.report_count);
+ return -1;
+ }
+ return 0;
+
+ case HID_GLOBAL_ITEM_TAG_REPORT_ID:
+ if ((parser->global.report_id = item_udata(item)) == 0) {
+ dbg("report_id 0 is invalid");
+ return -1;
+ }
+ return 0;
+
+ default:
+ dbg("unknown global tag 0x%x", item->tag);
+ return -1;
+ }
+}
+
+/*
+ * Process a local item.
+ */
+
+static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
+{
+ __u32 data;
+ unsigned n;
+
+ if (item->size == 0) {
+ dbg("item data expected for local item");
+ return -1;
+ }
+
+ data = item_udata(item);
+
+ switch (item->tag) {
+
+ case HID_LOCAL_ITEM_TAG_DELIMITER:
+
+ if (data) {
+ /*
+ * We treat items before the first delimiter
+ * as global to all usage sets (branch 0).
+ * In the moment we process only these global
+ * items and the first delimiter set.
+ */
+ if (parser->local.delimiter_depth != 0) {
+ dbg("nested delimiters");
+ return -1;
+ }
+ parser->local.delimiter_depth++;
+ parser->local.delimiter_branch++;
+ } else {
+ if (parser->local.delimiter_depth < 1) {
+ dbg("bogus close delimiter");
+ return -1;
+ }
+ parser->local.delimiter_depth--;
+ }
+ return 1;
+
+ case HID_LOCAL_ITEM_TAG_USAGE:
+
+ if (parser->local.delimiter_branch > 1) {
+ dbg("alternative usage ignored");
+ return 0;
+ }
+
+ if (item->size <= 2)
+ data = (parser->global.usage_page << 16) + data;
+
+ return hid_add_usage(parser, data);
+
+ case HID_LOCAL_ITEM_TAG_USAGE_MINIMUM:
+
+ if (parser->local.delimiter_branch > 1) {
+ dbg("alternative usage ignored");
+ return 0;
+ }
+
+ if (item->size <= 2)
+ data = (parser->global.usage_page << 16) + data;
+
+ parser->local.usage_minimum = data;
+ return 0;
+
+ case HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM:
+
+ if (parser->local.delimiter_branch > 1) {
+ dbg("alternative usage ignored");
+ return 0;
+ }
+
+ if (item->size <= 2)
+ data = (parser->global.usage_page << 16) + data;
+
+ for (n = parser->local.usage_minimum; n <= data; n++)
+ if (hid_add_usage(parser, n)) {
+ dbg("hid_add_usage failed\n");
+ return -1;
+ }
+ return 0;
+
+ default:
+
+ dbg("unknown local item tag 0x%x", item->tag);
+ return 0;
+ }
+ return 0;
+}
+
+/*
+ * Process a main item.
+ */
+
+static int hid_parser_main(struct hid_parser *parser, struct hid_item *item)
+{
+ __u32 data;
+ int ret;
+
+ data = item_udata(item);
+
+ switch (item->tag) {
+ case HID_MAIN_ITEM_TAG_BEGIN_COLLECTION:
+ ret = open_collection(parser, data & 0xff);
+ break;
+ case HID_MAIN_ITEM_TAG_END_COLLECTION:
+ ret = close_collection(parser);
+ break;
+ case HID_MAIN_ITEM_TAG_INPUT:
+ ret = hid_add_field(parser, HID_INPUT_REPORT, data);
+ break;
+ case HID_MAIN_ITEM_TAG_OUTPUT:
+ ret = hid_add_field(parser, HID_OUTPUT_REPORT, data);
+ break;
+ case HID_MAIN_ITEM_TAG_FEATURE:
+ ret = hid_add_field(parser, HID_FEATURE_REPORT, data);
+ break;
+ default:
+ dbg("unknown main item tag 0x%x", item->tag);
+ ret = 0;
+ }
+
+ memset(&parser->local, 0, sizeof(parser->local)); /* Reset the local parser environment */
+
+ return ret;
+}
+
+/*
+ * Process a reserved item.
+ */
+
+static int hid_parser_reserved(struct hid_parser *parser, struct hid_item *item)
+{
+ dbg("reserved item type, tag 0x%x", item->tag);
+ return 0;
+}
+
+/*
+ * Free a report and all registered fields. The field->usage and
+ * field->value table's are allocated behind the field, so we need
+ * only to free(field) itself.
+ */
+
+static void hid_free_report(struct hid_report *report)
+{
+ unsigned n;
+
+ for (n = 0; n < report->maxfield; n++)
+ kfree(report->field[n]);
+ kfree(report);
+}
+
+/*
+ * Free a device structure, all reports, and all fields.
+ */
+
+void hid_free_device(struct hid_device *device)
+{
+ unsigned i,j;
+
+ for (i = 0; i < HID_REPORT_TYPES; i++) {
+ struct hid_report_enum *report_enum = device->report_enum + i;
+
+ for (j = 0; j < 256; j++) {
+ struct hid_report *report = report_enum->report_id_hash[j];
+ if (report)
+ hid_free_report(report);
+ }
+ }
+
+ kfree(device->rdesc);
+ kfree(device);
+}
+EXPORT_SYMBOL_GPL(hid_free_device);
+
+/*
+ * Fetch a report description item from the data stream. We support long
+ * items, though they are not used yet.
+ */
+
+static u8 *fetch_item(__u8 *start, __u8 *end, struct hid_item *item)
+{
+ u8 b;
+
+ if ((end - start) <= 0)
+ return NULL;
+
+ b = *start++;
+
+ item->type = (b >> 2) & 3;
+ item->tag = (b >> 4) & 15;
+
+ if (item->tag == HID_ITEM_TAG_LONG) {
+
+ item->format = HID_ITEM_FORMAT_LONG;
+
+ if ((end - start) < 2)
+ return NULL;
+
+ item->size = *start++;
+ item->tag = *start++;
+
+ if ((end - start) < item->size)
+ return NULL;
+
+ item->data.longdata = start;
+ start += item->size;
+ return start;
+ }
+
+ item->format = HID_ITEM_FORMAT_SHORT;
+ item->size = b & 3;
+
+ switch (item->size) {
+
+ case 0:
+ return start;
+
+ case 1:
+ if ((end - start) < 1)
+ return NULL;
+ item->data.u8 = *start++;
+ return start;
+
+ case 2:
+ if ((end - start) < 2)
+ return NULL;
+ item->data.u16 = le16_to_cpu(get_unaligned((__le16*)start));
+ start = (__u8 *)((__le16 *)start + 1);
+ return start;
+
+ case 3:
+ item->size++;
+ if ((end - start) < 4)
+ return NULL;
+ item->data.u32 = le32_to_cpu(get_unaligned((__le32*)start));
+ start = (__u8 *)((__le32 *)start + 1);
+ return start;
+ }
+
+ return NULL;
+}
+
+/*
+ * Parse a report description into a hid_device structure. Reports are
+ * enumerated, fields are attached to these reports.
+ */
+
+struct hid_device *hid_parse_report(__u8 *start, unsigned size)
+{
+ struct hid_device *device;
+ struct hid_parser *parser;
+ struct hid_item item;
+ __u8 *end;
+ unsigned i;
+ static int (*dispatch_type[])(struct hid_parser *parser,
+ struct hid_item *item) = {
+ hid_parser_main,
+ hid_parser_global,
+ hid_parser_local,
+ hid_parser_reserved
+ };
+
+ if (!(device = kzalloc(sizeof(struct hid_device), GFP_KERNEL)))
+ return NULL;
+
+ if (!(device->collection = kzalloc(sizeof(struct hid_collection) *
+ HID_DEFAULT_NUM_COLLECTIONS, GFP_KERNEL))) {
+ kfree(device);
+ return NULL;
+ }
+ device->collection_size = HID_DEFAULT_NUM_COLLECTIONS;
+
+ for (i = 0; i < HID_REPORT_TYPES; i++)
+ INIT_LIST_HEAD(&device->report_enum[i].report_list);
+
+ if (!(device->rdesc = (__u8 *)kmalloc(size, GFP_KERNEL))) {
+ kfree(device->collection);
+ kfree(device);
+ return NULL;
+ }
+ memcpy(device->rdesc, start, size);
+ device->rsize = size;
+
+ if (!(parser = kzalloc(sizeof(struct hid_parser), GFP_KERNEL))) {
+ kfree(device->rdesc);
+ kfree(device->collection);
+ kfree(device);
+ return NULL;
+ }
+ parser->device = device;
+
+ end = start + size;
+ while ((start = fetch_item(start, end, &item)) != NULL) {
+
+ if (item.format != HID_ITEM_FORMAT_SHORT) {
+ dbg("unexpected long global item");
+ kfree(device->collection);
+ hid_free_device(device);
+ kfree(parser);
+ return NULL;
+ }
+
+ if (dispatch_type[item.type](parser, &item)) {
+ dbg("item %u %u %u %u parsing failed\n",
+ item.format, (unsigned)item.size, (unsigned)item.type, (unsigned)item.tag);
+ kfree(device->collection);
+ hid_free_device(device);
+ kfree(parser);
+ return NULL;
+ }
+
+ if (start == end) {
+ if (parser->collection_stack_ptr) {
+ dbg("unbalanced collection at end of report description");
+ kfree(device->collection);
+ hid_free_device(device);
+ kfree(parser);
+ return NULL;
+ }
+ if (parser->local.delimiter_depth) {
+ dbg("unbalanced delimiter at end of report description");
+ kfree(device->collection);
+ hid_free_device(device);
+ kfree(parser);
+ return NULL;
+ }
+ kfree(parser);
+ return device;
+ }
+ }
+
+ dbg("item fetching failed at offset %d\n", (int)(end - start));
+ kfree(device->collection);
+ hid_free_device(device);
+ kfree(parser);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(hid_parse_report);
+
+/*
+ * Convert a signed n-bit integer to signed 32-bit integer. Common
+ * cases are done through the compiler, the screwed things has to be
+ * done by hand.
+ */
+
+static s32 snto32(__u32 value, unsigned n)
+{
+ switch (n) {
+ case 8: return ((__s8)value);
+ case 16: return ((__s16)value);
+ case 32: return ((__s32)value);
+ }
+ return value & (1 << (n - 1)) ? value | (-1 << n) : value;
+}
+
+/*
+ * Convert a signed 32-bit integer to a signed n-bit integer.
+ */
+
+static u32 s32ton(__s32 value, unsigned n)
+{
+ s32 a = value >> (n - 1);
+ if (a && a != -1)
+ return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1;
+ return value & ((1 << n) - 1);
+}
+
+/*
+ * Extract/implement a data field from/to a little endian report (bit array).
+ *
+ * Code sort-of follows HID spec:
+ * http://www.usb.org/developers/devclass_docs/HID1_11.pdf
+ *
+ * While the USB HID spec allows unlimited length bit fields in "report
+ * descriptors", most devices never use more than 16 bits.
+ * One model of UPS is claimed to report "LINEV" as a 32-bit field.
+ * Search linux-kernel and linux-usb-devel archives for "hid-core extract".
+ */
+
+static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
+{
+ u64 x;
+
+ WARN_ON(n > 32);
+
+ report += offset >> 3; /* adjust byte index */
+ offset &= 7; /* now only need bit offset into one byte */
+ x = get_unaligned((u64 *) report);
+ x = le64_to_cpu(x);
+ x = (x >> offset) & ((1ULL << n) - 1); /* extract bit field */
+ return (u32) x;
+}
+
+/*
+ * "implement" : set bits in a little endian bit stream.
+ * Same concepts as "extract" (see comments above).
+ * The data mangled in the bit stream remains in little endian
+ * order the whole time. It make more sense to talk about
+ * endianness of register values by considering a register
+ * a "cached" copy of the little endiad bit stream.
+ */
+static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
+{
+ u64 x;
+ u64 m = (1ULL << n) - 1;
+
+ WARN_ON(n > 32);
+
+ WARN_ON(value > m);
+ value &= m;
+
+ report += offset >> 3;
+ offset &= 7;
+
+ x = get_unaligned((u64 *)report);
+ x &= cpu_to_le64(~(m << offset));
+ x |= cpu_to_le64(((u64) value) << offset);
+ put_unaligned(x, (u64 *) report);
+}
+
+/*
+ * Search an array for a value.
+ */
+
+static __inline__ int search(__s32 *array, __s32 value, unsigned n)
+{
+ while (n--) {
+ if (*array++ == value)
+ return 0;
+ }
+ return -1;
+}
+
+static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value, int interrupt)
+{
+ hid_dump_input(usage, value);
+ if (hid->claimed & HID_CLAIMED_INPUT)
+ hidinput_hid_event(hid, field, usage, value);
+ if (hid->claimed & HID_CLAIMED_HIDDEV && interrupt && hid->hiddev_hid_event)
+ hid->hiddev_hid_event(hid, field, usage, value);
+}
+
+/*
+ * Analyse a received field, and fetch the data from it. The field
+ * content is stored for next report processing (we do differential
+ * reporting to the layer).
+ */
+
+void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt)
+{
+ unsigned n;
+ unsigned count = field->report_count;
+ unsigned offset = field->report_offset;
+ unsigned size = field->report_size;
+ __s32 min = field->logical_minimum;
+ __s32 max = field->logical_maximum;
+ __s32 *value;
+
+ if (!(value = kmalloc(sizeof(__s32) * count, GFP_ATOMIC)))
+ return;
+
+ for (n = 0; n < count; n++) {
+
+ value[n] = min < 0 ? snto32(extract(data, offset + n * size, size), size) :
+ extract(data, offset + n * size, size);
+
+ if (!(field->flags & HID_MAIN_ITEM_VARIABLE) /* Ignore report if ErrorRollOver */
+ && value[n] >= min && value[n] <= max
+ && field->usage[value[n] - min].hid == HID_UP_KEYBOARD + 1)
+ goto exit;
+ }
+
+ for (n = 0; n < count; n++) {
+
+ if (HID_MAIN_ITEM_VARIABLE & field->flags) {
+ hid_process_event(hid, field, &field->usage[n], value[n], interrupt);
+ continue;
+ }
+
+ if (field->value[n] >= min && field->value[n] <= max
+ && field->usage[field->value[n] - min].hid
+ && search(value, field->value[n], count))
+ hid_process_event(hid, field, &field->usage[field->value[n] - min], 0, interrupt);
+
+ if (value[n] >= min && value[n] <= max
+ && field->usage[value[n] - min].hid
+ && search(field->value, value[n], count))
+ hid_process_event(hid, field, &field->usage[value[n] - min], 1, interrupt);
+ }
+
+ memcpy(field->value, value, count * sizeof(__s32));
+exit:
+ kfree(value);
+}
+EXPORT_SYMBOL_GPL(hid_input_field);
+
+/*
+ * Output the field into the report.
+ */
+
+static void hid_output_field(struct hid_field *field, __u8 *data)
+{
+ unsigned count = field->report_count;
+ unsigned offset = field->report_offset;
+ unsigned size = field->report_size;
+ unsigned n;
+
+ for (n = 0; n < count; n++) {
+ if (field->logical_minimum < 0) /* signed values */
+ implement(data, offset + n * size, size, s32ton(field->value[n], size));
+ else /* unsigned values */
+ implement(data, offset + n * size, size, field->value[n]);
+ }
+}
+
+/*
+ * Create a report.
+ */
+
+void hid_output_report(struct hid_report *report, __u8 *data)
+{
+ unsigned n;
+
+ if (report->id > 0)
+ *data++ = report->id;
+
+ for (n = 0; n < report->maxfield; n++)
+ hid_output_field(report->field[n], data);
+}
+EXPORT_SYMBOL_GPL(hid_output_report);
+
+/*
+ * Set a field value. The report this field belongs to has to be
+ * created and transferred to the device, to set this value in the
+ * device.
+ */
+
+int hid_set_field(struct hid_field *field, unsigned offset, __s32 value)
+{
+ unsigned size = field->report_size;
+
+ hid_dump_input(field->usage + offset, value);
+
+ if (offset >= field->report_count) {
+ dbg("offset (%d) exceeds report_count (%d)", offset, field->report_count);
+ hid_dump_field(field, 8);
+ return -1;
+ }
+ if (field->logical_minimum < 0) {
+ if (value != snto32(s32ton(value, size), size)) {
+ dbg("value %d is out of range", value);
+ return -1;
+ }
+ }
+ field->value[offset] = value;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hid_set_field);
+
+int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int interrupt)
+{
+ struct hid_report_enum *report_enum = hid->report_enum + type;
+ struct hid_report *report;
+ int n, rsize;
+
+ if (!hid)
+ return -ENODEV;
+
+ if (!size) {
+ dbg("empty report");
+ return -1;
+ }
+
+#ifdef DEBUG_DATA
+ printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", len, report_enum->numbered ? "" : "un");
+#endif
+
+ n = 0; /* Normally report number is 0 */
+ if (report_enum->numbered) { /* Device uses numbered reports, data[0] is report number */
+ n = *data++;
+ size--;
+ }
+
+#ifdef DEBUG_DATA
+ {
+ int i;
+ printk(KERN_DEBUG __FILE__ ": report %d (size %u) = ", n, size);
+ for (i = 0; i < size; i++)
+ printk(" %02x", data[i]);
+ printk("\n");
+ }
+#endif
+
+ if (!(report = report_enum->report_id_hash[n])) {
+ dbg("undefined report_id %d received", n);
+ return -1;
+ }
+
+ rsize = ((report->size - 1) >> 3) + 1;
+
+ if (size < rsize) {
+ dbg("report %d is too short, (%d < %d)", report->id, size, rsize);
+ return -1;
+ }
+
+ if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_report_event)
+ hid->hiddev_report_event(hid, report);
+
+ for (n = 0; n < report->maxfield; n++)
+ hid_input_field(hid, report->field[n], data, interrupt);
+
+ if (hid->claimed & HID_CLAIMED_INPUT)
+ hidinput_report_event(hid, report);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hid_input_report);
+
+MODULE_LICENSE(DRIVER_LICENSE);
+
* $Id: hid-input.c,v 1.2 2002/04/23 00:59:25 rdamazio Exp $
*
* Copyright (c) 2000-2001 Vojtech Pavlik
+ * Copyright (c) 2006 Jiri Kosina
*
- * USB HID to Linux Input mapping
+ * HID to Linux Input mapping
*/
/*
#undef DEBUG
-#include "hid.h"
+#include <linux/hid.h>
#define unk KEY_UNKNOWN
static struct hidinput_key_translation powerbook_fn_keys[] = {
{ KEY_BACKSPACE, KEY_DELETE },
- { KEY_F1, KEY_BRIGHTNESSDOWN, POWERBOOK_FLAG_FKEY },
- { KEY_F2, KEY_BRIGHTNESSUP, POWERBOOK_FLAG_FKEY },
- { KEY_F3, KEY_MUTE, POWERBOOK_FLAG_FKEY },
- { KEY_F4, KEY_VOLUMEDOWN, POWERBOOK_FLAG_FKEY },
- { KEY_F5, KEY_VOLUMEUP, POWERBOOK_FLAG_FKEY },
- { KEY_F6, KEY_NUMLOCK, POWERBOOK_FLAG_FKEY },
- { KEY_F7, KEY_SWITCHVIDEOMODE, POWERBOOK_FLAG_FKEY },
- { KEY_F8, KEY_KBDILLUMTOGGLE, POWERBOOK_FLAG_FKEY },
- { KEY_F9, KEY_KBDILLUMDOWN, POWERBOOK_FLAG_FKEY },
- { KEY_F10, KEY_KBDILLUMUP, POWERBOOK_FLAG_FKEY },
- { KEY_UP, KEY_PAGEUP },
- { KEY_DOWN, KEY_PAGEDOWN },
- { KEY_LEFT, KEY_HOME },
- { KEY_RIGHT, KEY_END },
+ { KEY_F1, KEY_BRIGHTNESSDOWN, POWERBOOK_FLAG_FKEY },
+ { KEY_F2, KEY_BRIGHTNESSUP, POWERBOOK_FLAG_FKEY },
+ { KEY_F3, KEY_MUTE, POWERBOOK_FLAG_FKEY },
+ { KEY_F4, KEY_VOLUMEDOWN, POWERBOOK_FLAG_FKEY },
+ { KEY_F5, KEY_VOLUMEUP, POWERBOOK_FLAG_FKEY },
+ { KEY_F6, KEY_NUMLOCK, POWERBOOK_FLAG_FKEY },
+ { KEY_F7, KEY_SWITCHVIDEOMODE, POWERBOOK_FLAG_FKEY },
+ { KEY_F8, KEY_KBDILLUMTOGGLE, POWERBOOK_FLAG_FKEY },
+ { KEY_F9, KEY_KBDILLUMDOWN, POWERBOOK_FLAG_FKEY },
+ { KEY_F10, KEY_KBDILLUMUP, POWERBOOK_FLAG_FKEY },
+ { KEY_UP, KEY_PAGEUP },
+ { KEY_DOWN, KEY_PAGEDOWN },
+ { KEY_LEFT, KEY_HOME },
+ { KEY_RIGHT, KEY_END },
{ }
};
static struct hidinput_key_translation powerbook_numlock_keys[] = {
- { KEY_J, KEY_KP1 },
- { KEY_K, KEY_KP2 },
- { KEY_L, KEY_KP3 },
- { KEY_U, KEY_KP4 },
- { KEY_I, KEY_KP5 },
- { KEY_O, KEY_KP6 },
- { KEY_7, KEY_KP7 },
- { KEY_8, KEY_KP8 },
- { KEY_9, KEY_KP9 },
- { KEY_M, KEY_KP0 },
- { KEY_DOT, KEY_KPDOT },
- { KEY_SLASH, KEY_KPPLUS },
+ { KEY_J, KEY_KP1 },
+ { KEY_K, KEY_KP2 },
+ { KEY_L, KEY_KP3 },
+ { KEY_U, KEY_KP4 },
+ { KEY_I, KEY_KP5 },
+ { KEY_O, KEY_KP6 },
+ { KEY_7, KEY_KP7 },
+ { KEY_8, KEY_KP8 },
+ { KEY_9, KEY_KP9 },
+ { KEY_M, KEY_KP0 },
+ { KEY_DOT, KEY_KPDOT },
+ { KEY_SLASH, KEY_KPPLUS },
{ KEY_SEMICOLON, KEY_KPMINUS },
- { KEY_P, KEY_KPASTERISK },
- { KEY_MINUS, KEY_KPEQUAL },
- { KEY_0, KEY_KPSLASH },
- { KEY_F6, KEY_NUMLOCK },
- { KEY_KPENTER, KEY_KPENTER },
+ { KEY_P, KEY_KPASTERISK },
+ { KEY_MINUS, KEY_KPEQUAL },
+ { KEY_0, KEY_KPSLASH },
+ { KEY_F6, KEY_NUMLOCK },
+ { KEY_KPENTER, KEY_KPENTER },
{ KEY_BACKSPACE, KEY_BACKSPACE },
{ }
};
{ }
};
-static int usbhid_pb_fnmode = 1;
-module_param_named(pb_fnmode, usbhid_pb_fnmode, int, 0644);
-MODULE_PARM_DESC(pb_fnmode,
- "Mode of fn key on PowerBooks (0 = disabled, 1 = fkeyslast, 2 = fkeysfirst)");
-
static struct hidinput_key_translation *find_translation(struct hidinput_key_translation *table, u16 from)
{
struct hidinput_key_translation *trans;
}
static int hidinput_pb_event(struct hid_device *hid, struct input_dev *input,
- struct hid_usage *usage, __s32 value)
+ struct hid_usage *usage, __s32 value)
{
struct hidinput_key_translation *trans;
return 1;
}
- if (usbhid_pb_fnmode) {
+ if (hid->pb_fnmode) {
int do_translate;
trans = find_translation(powerbook_fn_keys, usage->code);
do_translate = 1;
else if (trans->flags & POWERBOOK_FLAG_FKEY)
do_translate =
- (usbhid_pb_fnmode == 2 && (hid->quirks & HID_QUIRK_POWERBOOK_FN_ON)) ||
- (usbhid_pb_fnmode == 1 && !(hid->quirks & HID_QUIRK_POWERBOOK_FN_ON));
+ (hid->pb_fnmode == 2 && (hid->quirks & HID_QUIRK_POWERBOOK_FN_ON)) ||
+ (hid->pb_fnmode == 1 && !(hid->quirks & HID_QUIRK_POWERBOOK_FN_ON));
else
do_translate = (hid->quirks & HID_QUIRK_POWERBOOK_FN_ON);
}
if (test_bit(usage->code, hid->pb_pressed_numlock) ||
- test_bit(LED_NUML, input->led)) {
+ test_bit(LED_NUML, input->led)) {
trans = find_translation(powerbook_numlock_keys, usage->code);
if (trans) {
for (trans = powerbook_iso_keyboard; trans->from; trans++)
set_bit(trans->to, input->keybit);
+
}
#else
static inline int hidinput_pb_event(struct hid_device *hid, struct input_dev *input,
- struct hid_usage *usage, __s32 value)
+ struct hid_usage *usage, __s32 value)
{
return 0;
}
|| ((device->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_7) && (usage->hid == 0x00090007)))
goto ignore;
+ if ((device->quirks & HID_QUIRK_BAD_RELATIVE_KEYS) &&
+ usage->type == EV_KEY && (field->flags & HID_MAIN_ITEM_RELATIVE))
+ field->flags &= ~HID_MAIN_ITEM_RELATIVE;
+
set_bit(usage->type, input->evbit);
while (usage->code <= max && test_and_set_bit(usage->code, bit))
list_for_each_entry(hidinput, &hid->inputs, list)
input_sync(hidinput->input);
}
+EXPORT_SYMBOL_GPL(hidinput_report_event);
-static int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field)
+int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field)
{
struct hid_report *report;
int i, j;
}
return -1;
}
-
-static int hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
- struct hid_device *hid = dev->private;
- struct hid_field *field;
- int offset;
-
- if (type == EV_FF)
- return input_ff_event(dev, type, code, value);
-
- if (type != EV_LED)
- return -1;
-
- if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) {
- warn("event field not found");
- return -1;
- }
-
- hid_set_field(field, offset, value);
- hid_submit_report(hid, field->report, USB_DIR_OUT);
-
- return 0;
-}
-
-static int hidinput_open(struct input_dev *dev)
-{
- struct hid_device *hid = dev->private;
- return hid_open(hid);
-}
-
-static void hidinput_close(struct input_dev *dev)
-{
- struct hid_device *hid = dev->private;
- hid_close(hid);
-}
+EXPORT_SYMBOL_GPL(hidinput_find_field);
/*
* Register the input device; print a message.
int hidinput_connect(struct hid_device *hid)
{
- struct usb_device *dev = hid->dev;
struct hid_report *report;
struct hid_input *hidinput = NULL;
struct input_dev *input_dev;
}
input_dev->private = hid;
- input_dev->event = hidinput_input_event;
- input_dev->open = hidinput_open;
- input_dev->close = hidinput_close;
+ input_dev->event = hid->hidinput_input_event;
+ input_dev->open = hid->hidinput_open;
+ input_dev->close = hid->hidinput_close;
input_dev->name = hid->name;
input_dev->phys = hid->phys;
input_dev->uniq = hid->uniq;
- usb_to_input_id(dev, &input_dev->id);
- input_dev->cdev.dev = &hid->intf->dev;
-
+ input_dev->id.bustype = hid->bus;
+ input_dev->id.vendor = hid->vendor;
+ input_dev->id.product = hid->product;
+ input_dev->id.version = hid->version;
+ input_dev->cdev.dev = hid->dev;
hidinput->input = input_dev;
list_add_tail(&hidinput->list, &hid->inputs);
}
}
}
- /* This only gets called when we are a single-input (most of the
- * time). IOW, not a HID_QUIRK_MULTI_INPUT. The hid_ff_init() is
- * only useful in this case, and not for multi-input quirks. */
- if (hidinput) {
- hid_ff_init(hid);
+ if (hidinput)
input_register_device(hidinput->input);
- }
return 0;
}
+EXPORT_SYMBOL_GPL(hidinput_connect);
void hidinput_disconnect(struct hid_device *hid)
{
kfree(hidinput);
}
}
+EXPORT_SYMBOL_GPL(hidinput_disconnect);
+
This driver can also be built as a module. If so, the module
will be called k8temp.
+config SENSORS_AMS
+ tristate "Apple Motion Sensor driver"
+ depends on HWMON && PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+ help
+ Support for the motion sensor included in PowerBooks. Includes
+ implementations for PMU and I2C.
+
+ This driver can also be built as a module. If so, the module
+ will be called ams.
+
+config SENSORS_AMS_PMU
+ bool "PMU variant"
+ depends on SENSORS_AMS && ADB_PMU
+ default y
+ help
+ PMU variant of motion sensor, found in late 2005 PowerBooks.
+
+config SENSORS_AMS_I2C
+ bool "I2C variant"
+ depends on SENSORS_AMS && I2C
+ default y
+ help
+ I2C variant of motion sensor, found in early 2005 PowerBooks and
+ iBooks.
+
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on HWMON && I2C && EXPERIMENTAL
will be called ds1621.
config SENSORS_F71805F
- tristate "Fintek F71805F/FG"
+ tristate "Fintek F71805F/FG and F71872F/FG"
depends on HWMON && EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71805F/FG chips.
+ features of the Fintek F71805F/FG and F71872F/FG Super-I/O
+ chips.
This driver can also be built as a module. If so, the module
will be called f71805f.
This driver can also be built as a module. If so, the module
will be called pc87360.
+config SENSORS_PC87427
+ tristate "National Semiconductor PC87427"
+ depends on HWMON && EXPERIMENTAL
+ help
+ If you say yes here you get access to the hardware monitoring
+ functions of the National Semiconductor PC87427 Super-I/O chip.
+ The chip has two distinct logical devices, one for fan speed
+ monitoring and control, and one for voltage and temperature
+ monitoring. Only fan speed monitoring is supported right now.
+
+ This driver can also be built as a module. If so, the module
+ will be called pc87427.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on HWMON && I2C && PCI && EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called w83792d.
+config SENSORS_W83793
+ tristate "Winbond W83793"
+ depends on HWMON && I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Winbond W83793
+ hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83793.
+
config SENSORS_W83L785TS
tristate "Winbond W83L785TS-S"
depends on HWMON && I2C && EXPERIMENTAL
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
+ If your ThinkPad is not recognized by the driver, please update to latest
+ BIOS. This is especially the case for some R52 ThinkPads.
+
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
obj-$(CONFIG_SENSORS_ASB100) += asb100.o
obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
obj-$(CONFIG_SENSORS_W83792D) += w83792d.o
+obj-$(CONFIG_SENSORS_W83793) += w83793.o
obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
obj-$(CONFIG_SENSORS_W83791D) += w83791d.o
obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
+obj-$(CONFIG_SENSORS_AMS) += ams/
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_LM92) += lm92.o
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
+obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
--- /dev/null
+#
+# Makefile for Apple Motion Sensor driver
+#
+
+ams-y := ams-core.o ams-input.o
+ams-$(CONFIG_SENSORS_AMS_PMU) += ams-pmu.o
+ams-$(CONFIG_SENSORS_AMS_I2C) += ams-i2c.o
+obj-$(CONFIG_SENSORS_AMS) += ams.o
--- /dev/null
+/*
+ * Apple Motion Sensor driver
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/pmac_pfunc.h>
+#include <asm/of_platform.h>
+
+#include "ams.h"
+
+/* There is only one motion sensor per machine */
+struct ams ams_info;
+
+static unsigned int verbose;
+module_param(verbose, bool, 0644);
+MODULE_PARM_DESC(verbose, "Show free falls and shocks in kernel output");
+
+/* Call with ams_info.lock held! */
+void ams_sensors(s8 *x, s8 *y, s8 *z)
+{
+ u32 orient = ams_info.vflag? ams_info.orient1 : ams_info.orient2;
+
+ if (orient & 0x80)
+ /* X and Y swapped */
+ ams_info.get_xyz(y, x, z);
+ else
+ ams_info.get_xyz(x, y, z);
+
+ if (orient & 0x04)
+ *z = ~(*z);
+ if (orient & 0x02)
+ *y = ~(*y);
+ if (orient & 0x01)
+ *x = ~(*x);
+}
+
+static ssize_t ams_show_current(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ s8 x, y, z;
+
+ mutex_lock(&ams_info.lock);
+ ams_sensors(&x, &y, &z);
+ mutex_unlock(&ams_info.lock);
+
+ return snprintf(buf, PAGE_SIZE, "%d %d %d\n", x, y, z);
+}
+
+static DEVICE_ATTR(current, S_IRUGO, ams_show_current, NULL);
+
+static void ams_handle_irq(void *data)
+{
+ enum ams_irq irq = *((enum ams_irq *)data);
+
+ spin_lock(&ams_info.irq_lock);
+
+ ams_info.worker_irqs |= irq;
+ schedule_work(&ams_info.worker);
+
+ spin_unlock(&ams_info.irq_lock);
+}
+
+static enum ams_irq ams_freefall_irq_data = AMS_IRQ_FREEFALL;
+static struct pmf_irq_client ams_freefall_client = {
+ .owner = THIS_MODULE,
+ .handler = ams_handle_irq,
+ .data = &ams_freefall_irq_data,
+};
+
+static enum ams_irq ams_shock_irq_data = AMS_IRQ_SHOCK;
+static struct pmf_irq_client ams_shock_client = {
+ .owner = THIS_MODULE,
+ .handler = ams_handle_irq,
+ .data = &ams_shock_irq_data,
+};
+
+/* Once hard disk parking is implemented in the kernel, this function can
+ * trigger it.
+ */
+static void ams_worker(struct work_struct *work)
+{
+ mutex_lock(&ams_info.lock);
+
+ if (ams_info.has_device) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&ams_info.irq_lock, flags);
+
+ if (ams_info.worker_irqs & AMS_IRQ_FREEFALL) {
+ if (verbose)
+ printk(KERN_INFO "ams: freefall detected!\n");
+
+ ams_info.worker_irqs &= ~AMS_IRQ_FREEFALL;
+
+ /* we must call this with interrupts enabled */
+ spin_unlock_irqrestore(&ams_info.irq_lock, flags);
+ ams_info.clear_irq(AMS_IRQ_FREEFALL);
+ spin_lock_irqsave(&ams_info.irq_lock, flags);
+ }
+
+ if (ams_info.worker_irqs & AMS_IRQ_SHOCK) {
+ if (verbose)
+ printk(KERN_INFO "ams: shock detected!\n");
+
+ ams_info.worker_irqs &= ~AMS_IRQ_SHOCK;
+
+ /* we must call this with interrupts enabled */
+ spin_unlock_irqrestore(&ams_info.irq_lock, flags);
+ ams_info.clear_irq(AMS_IRQ_SHOCK);
+ spin_lock_irqsave(&ams_info.irq_lock, flags);
+ }
+
+ spin_unlock_irqrestore(&ams_info.irq_lock, flags);
+ }
+
+ mutex_unlock(&ams_info.lock);
+}
+
+/* Call with ams_info.lock held! */
+int ams_sensor_attach(void)
+{
+ int result;
+ u32 *prop;
+
+ /* Get orientation */
+ prop = (u32*)get_property(ams_info.of_node, "orientation", NULL);
+ if (!prop)
+ return -ENODEV;
+ ams_info.orient1 = *prop;
+ ams_info.orient2 = *(prop + 1);
+
+ /* Register freefall interrupt handler */
+ result = pmf_register_irq_client(ams_info.of_node,
+ "accel-int-1",
+ &ams_freefall_client);
+ if (result < 0)
+ return -ENODEV;
+
+ /* Reset saved irqs */
+ ams_info.worker_irqs = 0;
+
+ /* Register shock interrupt handler */
+ result = pmf_register_irq_client(ams_info.of_node,
+ "accel-int-2",
+ &ams_shock_client);
+ if (result < 0)
+ goto release_freefall;
+
+ /* Create device */
+ ams_info.of_dev = of_platform_device_create(ams_info.of_node, "ams", NULL);
+ if (!ams_info.of_dev) {
+ result = -ENODEV;
+ goto release_shock;
+ }
+
+ /* Create attributes */
+ result = device_create_file(&ams_info.of_dev->dev, &dev_attr_current);
+ if (result)
+ goto release_of;
+
+ ams_info.vflag = !!(ams_info.get_vendor() & 0x10);
+
+ /* Init input device */
+ result = ams_input_init();
+ if (result)
+ goto release_device_file;
+
+ return result;
+release_device_file:
+ device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
+release_of:
+ of_device_unregister(ams_info.of_dev);
+release_shock:
+ pmf_unregister_irq_client(&ams_shock_client);
+release_freefall:
+ pmf_unregister_irq_client(&ams_freefall_client);
+ return result;
+}
+
+int __init ams_init(void)
+{
+ struct device_node *np;
+
+ spin_lock_init(&ams_info.irq_lock);
+ mutex_init(&ams_info.lock);
+ INIT_WORK(&ams_info.worker, ams_worker);
+
+#ifdef CONFIG_SENSORS_AMS_I2C
+ np = of_find_node_by_name(NULL, "accelerometer");
+ if (np && device_is_compatible(np, "AAPL,accelerometer_1"))
+ /* Found I2C motion sensor */
+ return ams_i2c_init(np);
+#endif
+
+#ifdef CONFIG_SENSORS_AMS_PMU
+ np = of_find_node_by_name(NULL, "sms");
+ if (np && device_is_compatible(np, "sms"))
+ /* Found PMU motion sensor */
+ return ams_pmu_init(np);
+#endif
+
+ printk(KERN_ERR "ams: No motion sensor found.\n");
+
+ return -ENODEV;
+}
+
+void ams_exit(void)
+{
+ mutex_lock(&ams_info.lock);
+
+ if (ams_info.has_device) {
+ /* Remove input device */
+ ams_input_exit();
+
+ /* Shut down implementation */
+ ams_info.exit();
+
+ /* Flush interrupt worker
+ *
+ * We do this after ams_info.exit(), because an interrupt might
+ * have arrived before disabling them.
+ */
+ flush_scheduled_work();
+
+ /* Remove attributes */
+ device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
+
+ /* Remove device */
+ of_device_unregister(ams_info.of_dev);
+
+ /* Remove handler */
+ pmf_unregister_irq_client(&ams_shock_client);
+ pmf_unregister_irq_client(&ams_freefall_client);
+ }
+
+ mutex_unlock(&ams_info.lock);
+}
+
+MODULE_AUTHOR("Stelian Pop, Michael Hanselmann");
+MODULE_DESCRIPTION("Apple Motion Sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(ams_init);
+module_exit(ams_exit);
--- /dev/null
+/*
+ * Apple Motion Sensor driver (I2C variant)
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * Clean room implementation based on the reverse engineered Mac OS X driver by
+ * Johannes Berg <johannes@sipsolutions.net>, documentation available at
+ * http://johannes.sipsolutions.net/PowerBook/Apple_Motion_Sensor_Specification
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "ams.h"
+
+/* AMS registers */
+#define AMS_COMMAND 0x00 /* command register */
+#define AMS_STATUS 0x01 /* status register */
+#define AMS_CTRL1 0x02 /* read control 1 (number of values) */
+#define AMS_CTRL2 0x03 /* read control 2 (offset?) */
+#define AMS_CTRL3 0x04 /* read control 3 (size of each value?) */
+#define AMS_DATA1 0x05 /* read data 1 */
+#define AMS_DATA2 0x06 /* read data 2 */
+#define AMS_DATA3 0x07 /* read data 3 */
+#define AMS_DATA4 0x08 /* read data 4 */
+#define AMS_DATAX 0x20 /* data X */
+#define AMS_DATAY 0x21 /* data Y */
+#define AMS_DATAZ 0x22 /* data Z */
+#define AMS_FREEFALL 0x24 /* freefall int control */
+#define AMS_SHOCK 0x25 /* shock int control */
+#define AMS_SENSLOW 0x26 /* sensitivity low limit */
+#define AMS_SENSHIGH 0x27 /* sensitivity high limit */
+#define AMS_CTRLX 0x28 /* control X */
+#define AMS_CTRLY 0x29 /* control Y */
+#define AMS_CTRLZ 0x2A /* control Z */
+#define AMS_UNKNOWN1 0x2B /* unknown 1 */
+#define AMS_UNKNOWN2 0x2C /* unknown 2 */
+#define AMS_UNKNOWN3 0x2D /* unknown 3 */
+#define AMS_VENDOR 0x2E /* vendor */
+
+/* AMS commands - use with the AMS_COMMAND register */
+enum ams_i2c_cmd {
+ AMS_CMD_NOOP = 0,
+ AMS_CMD_VERSION,
+ AMS_CMD_READMEM,
+ AMS_CMD_WRITEMEM,
+ AMS_CMD_ERASEMEM,
+ AMS_CMD_READEE,
+ AMS_CMD_WRITEEE,
+ AMS_CMD_RESET,
+ AMS_CMD_START,
+};
+
+static int ams_i2c_attach(struct i2c_adapter *adapter);
+static int ams_i2c_detach(struct i2c_adapter *adapter);
+
+static struct i2c_driver ams_i2c_driver = {
+ .driver = {
+ .name = "ams",
+ .owner = THIS_MODULE,
+ },
+ .attach_adapter = ams_i2c_attach,
+ .detach_adapter = ams_i2c_detach,
+};
+
+static s32 ams_i2c_read(u8 reg)
+{
+ return i2c_smbus_read_byte_data(&ams_info.i2c_client, reg);
+}
+
+static int ams_i2c_write(u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(&ams_info.i2c_client, reg, value);
+}
+
+static int ams_i2c_cmd(enum ams_i2c_cmd cmd)
+{
+ s32 result;
+ int remaining = HZ / 20;
+
+ ams_i2c_write(AMS_COMMAND, cmd);
+ mdelay(5);
+
+ while (remaining) {
+ result = ams_i2c_read(AMS_COMMAND);
+ if (result == 0 || result & 0x80)
+ return 0;
+
+ remaining = schedule_timeout(remaining);
+ }
+
+ return -1;
+}
+
+static void ams_i2c_set_irq(enum ams_irq reg, char enable)
+{
+ if (reg & AMS_IRQ_FREEFALL) {
+ u8 val = ams_i2c_read(AMS_CTRLX);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_i2c_write(AMS_CTRLX, val);
+ }
+
+ if (reg & AMS_IRQ_SHOCK) {
+ u8 val = ams_i2c_read(AMS_CTRLY);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_i2c_write(AMS_CTRLY, val);
+ }
+
+ if (reg & AMS_IRQ_GLOBAL) {
+ u8 val = ams_i2c_read(AMS_CTRLZ);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_i2c_write(AMS_CTRLZ, val);
+ }
+}
+
+static void ams_i2c_clear_irq(enum ams_irq reg)
+{
+ if (reg & AMS_IRQ_FREEFALL)
+ ams_i2c_write(AMS_FREEFALL, 0);
+
+ if (reg & AMS_IRQ_SHOCK)
+ ams_i2c_write(AMS_SHOCK, 0);
+}
+
+static u8 ams_i2c_get_vendor(void)
+{
+ return ams_i2c_read(AMS_VENDOR);
+}
+
+static void ams_i2c_get_xyz(s8 *x, s8 *y, s8 *z)
+{
+ *x = ams_i2c_read(AMS_DATAX);
+ *y = ams_i2c_read(AMS_DATAY);
+ *z = ams_i2c_read(AMS_DATAZ);
+}
+
+static int ams_i2c_attach(struct i2c_adapter *adapter)
+{
+ unsigned long bus;
+ int vmaj, vmin;
+ int result;
+
+ /* There can be only one */
+ if (unlikely(ams_info.has_device))
+ return -ENODEV;
+
+ if (strncmp(adapter->name, "uni-n", 5))
+ return -ENODEV;
+
+ bus = simple_strtoul(adapter->name + 6, NULL, 10);
+ if (bus != ams_info.i2c_bus)
+ return -ENODEV;
+
+ ams_info.i2c_client.addr = ams_info.i2c_address;
+ ams_info.i2c_client.adapter = adapter;
+ ams_info.i2c_client.driver = &ams_i2c_driver;
+ strcpy(ams_info.i2c_client.name, "Apple Motion Sensor");
+
+ if (ams_i2c_cmd(AMS_CMD_RESET)) {
+ printk(KERN_INFO "ams: Failed to reset the device\n");
+ return -ENODEV;
+ }
+
+ if (ams_i2c_cmd(AMS_CMD_START)) {
+ printk(KERN_INFO "ams: Failed to start the device\n");
+ return -ENODEV;
+ }
+
+ /* get version/vendor information */
+ ams_i2c_write(AMS_CTRL1, 0x02);
+ ams_i2c_write(AMS_CTRL2, 0x85);
+ ams_i2c_write(AMS_CTRL3, 0x01);
+
+ ams_i2c_cmd(AMS_CMD_READMEM);
+
+ vmaj = ams_i2c_read(AMS_DATA1);
+ vmin = ams_i2c_read(AMS_DATA2);
+ if (vmaj != 1 || vmin != 52) {
+ printk(KERN_INFO "ams: Incorrect device version (%d.%d)\n",
+ vmaj, vmin);
+ return -ENODEV;
+ }
+
+ ams_i2c_cmd(AMS_CMD_VERSION);
+
+ vmaj = ams_i2c_read(AMS_DATA1);
+ vmin = ams_i2c_read(AMS_DATA2);
+ if (vmaj != 0 || vmin != 1) {
+ printk(KERN_INFO "ams: Incorrect firmware version (%d.%d)\n",
+ vmaj, vmin);
+ return -ENODEV;
+ }
+
+ /* Disable interrupts */
+ ams_i2c_set_irq(AMS_IRQ_ALL, 0);
+
+ result = ams_sensor_attach();
+ if (result < 0)
+ return result;
+
+ /* Set default values */
+ ams_i2c_write(AMS_SENSLOW, 0x15);
+ ams_i2c_write(AMS_SENSHIGH, 0x60);
+ ams_i2c_write(AMS_CTRLX, 0x08);
+ ams_i2c_write(AMS_CTRLY, 0x0F);
+ ams_i2c_write(AMS_CTRLZ, 0x4F);
+ ams_i2c_write(AMS_UNKNOWN1, 0x14);
+
+ /* Clear interrupts */
+ ams_i2c_clear_irq(AMS_IRQ_ALL);
+
+ ams_info.has_device = 1;
+
+ /* Enable interrupts */
+ ams_i2c_set_irq(AMS_IRQ_ALL, 1);
+
+ printk(KERN_INFO "ams: Found I2C based motion sensor\n");
+
+ return 0;
+}
+
+static int ams_i2c_detach(struct i2c_adapter *adapter)
+{
+ if (ams_info.has_device) {
+ /* Disable interrupts */
+ ams_i2c_set_irq(AMS_IRQ_ALL, 0);
+
+ /* Clear interrupts */
+ ams_i2c_clear_irq(AMS_IRQ_ALL);
+
+ printk(KERN_INFO "ams: Unloading\n");
+
+ ams_info.has_device = 0;
+ }
+
+ return 0;
+}
+
+static void ams_i2c_exit(void)
+{
+ i2c_del_driver(&ams_i2c_driver);
+}
+
+int __init ams_i2c_init(struct device_node *np)
+{
+ char *tmp_bus;
+ int result;
+ u32 *prop;
+
+ mutex_lock(&ams_info.lock);
+
+ /* Set implementation stuff */
+ ams_info.of_node = np;
+ ams_info.exit = ams_i2c_exit;
+ ams_info.get_vendor = ams_i2c_get_vendor;
+ ams_info.get_xyz = ams_i2c_get_xyz;
+ ams_info.clear_irq = ams_i2c_clear_irq;
+ ams_info.bustype = BUS_I2C;
+
+ /* look for bus either using "reg" or by path */
+ prop = (u32*)get_property(ams_info.of_node, "reg", NULL);
+ if (!prop) {
+ result = -ENODEV;
+
+ goto exit;
+ }
+
+ tmp_bus = strstr(ams_info.of_node->full_name, "/i2c-bus@");
+ if (tmp_bus)
+ ams_info.i2c_bus = *(tmp_bus + 9) - '0';
+ else
+ ams_info.i2c_bus = ((*prop) >> 8) & 0x0f;
+ ams_info.i2c_address = ((*prop) & 0xff) >> 1;
+
+ result = i2c_add_driver(&ams_i2c_driver);
+
+exit:
+ mutex_unlock(&ams_info.lock);
+
+ return result;
+}
--- /dev/null
+/*
+ * Apple Motion Sensor driver (joystick emulation)
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "ams.h"
+
+static unsigned int joystick;
+module_param(joystick, bool, 0644);
+MODULE_PARM_DESC(joystick, "Enable the input class device on module load");
+
+static unsigned int invert;
+module_param(invert, bool, 0644);
+MODULE_PARM_DESC(invert, "Invert input data on X and Y axis");
+
+static int ams_input_kthread(void *data)
+{
+ s8 x, y, z;
+
+ while (!kthread_should_stop()) {
+ mutex_lock(&ams_info.lock);
+
+ ams_sensors(&x, &y, &z);
+
+ x -= ams_info.xcalib;
+ y -= ams_info.ycalib;
+ z -= ams_info.zcalib;
+
+ input_report_abs(ams_info.idev, ABS_X, invert ? -x : x);
+ input_report_abs(ams_info.idev, ABS_Y, invert ? -y : y);
+ input_report_abs(ams_info.idev, ABS_Z, z);
+
+ input_sync(ams_info.idev);
+
+ mutex_unlock(&ams_info.lock);
+
+ msleep(25);
+ }
+
+ return 0;
+}
+
+static int ams_input_open(struct input_dev *dev)
+{
+ ams_info.kthread = kthread_run(ams_input_kthread, NULL, "kams");
+ return IS_ERR(ams_info.kthread) ? PTR_ERR(ams_info.kthread) : 0;
+}
+
+static void ams_input_close(struct input_dev *dev)
+{
+ kthread_stop(ams_info.kthread);
+}
+
+/* Call with ams_info.lock held! */
+static void ams_input_enable(void)
+{
+ s8 x, y, z;
+
+ if (ams_info.idev)
+ return;
+
+ ams_sensors(&x, &y, &z);
+ ams_info.xcalib = x;
+ ams_info.ycalib = y;
+ ams_info.zcalib = z;
+
+ ams_info.idev = input_allocate_device();
+ if (!ams_info.idev)
+ return;
+
+ ams_info.idev->name = "Apple Motion Sensor";
+ ams_info.idev->id.bustype = ams_info.bustype;
+ ams_info.idev->id.vendor = 0;
+ ams_info.idev->open = ams_input_open;
+ ams_info.idev->close = ams_input_close;
+ ams_info.idev->cdev.dev = &ams_info.of_dev->dev;
+
+ input_set_abs_params(ams_info.idev, ABS_X, -50, 50, 3, 0);
+ input_set_abs_params(ams_info.idev, ABS_Y, -50, 50, 3, 0);
+ input_set_abs_params(ams_info.idev, ABS_Z, -50, 50, 3, 0);
+
+ set_bit(EV_ABS, ams_info.idev->evbit);
+ set_bit(EV_KEY, ams_info.idev->evbit);
+ set_bit(BTN_TOUCH, ams_info.idev->keybit);
+
+ if (input_register_device(ams_info.idev)) {
+ input_free_device(ams_info.idev);
+ ams_info.idev = NULL;
+ return;
+ }
+}
+
+/* Call with ams_info.lock held! */
+static void ams_input_disable(void)
+{
+ if (ams_info.idev) {
+ input_unregister_device(ams_info.idev);
+ ams_info.idev = NULL;
+ }
+}
+
+static ssize_t ams_input_show_joystick(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", joystick);
+}
+
+static ssize_t ams_input_store_joystick(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ if (sscanf(buf, "%d\n", &joystick) != 1)
+ return -EINVAL;
+
+ mutex_lock(&ams_info.lock);
+
+ if (joystick)
+ ams_input_enable();
+ else
+ ams_input_disable();
+
+ mutex_unlock(&ams_info.lock);
+
+ return count;
+}
+
+static DEVICE_ATTR(joystick, S_IRUGO | S_IWUSR,
+ ams_input_show_joystick, ams_input_store_joystick);
+
+/* Call with ams_info.lock held! */
+int ams_input_init(void)
+{
+ int result;
+
+ result = device_create_file(&ams_info.of_dev->dev, &dev_attr_joystick);
+
+ if (!result && joystick)
+ ams_input_enable();
+ return result;
+}
+
+/* Call with ams_info.lock held! */
+void ams_input_exit()
+{
+ ams_input_disable();
+ device_remove_file(&ams_info.of_dev->dev, &dev_attr_joystick);
+}
--- /dev/null
+/*
+ * Apple Motion Sensor driver (PMU variant)
+ *
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+
+#include "ams.h"
+
+/* Attitude */
+#define AMS_X 0x00
+#define AMS_Y 0x01
+#define AMS_Z 0x02
+
+/* Not exactly known, maybe chip vendor */
+#define AMS_VENDOR 0x03
+
+/* Freefall registers */
+#define AMS_FF_CLEAR 0x04
+#define AMS_FF_ENABLE 0x05
+#define AMS_FF_LOW_LIMIT 0x06
+#define AMS_FF_DEBOUNCE 0x07
+
+/* Shock registers */
+#define AMS_SHOCK_CLEAR 0x08
+#define AMS_SHOCK_ENABLE 0x09
+#define AMS_SHOCK_HIGH_LIMIT 0x0a
+#define AMS_SHOCK_DEBOUNCE 0x0b
+
+/* Global interrupt and power control register */
+#define AMS_CONTROL 0x0c
+
+static u8 ams_pmu_cmd;
+
+static void ams_pmu_req_complete(struct adb_request *req)
+{
+ complete((struct completion *)req->arg);
+}
+
+/* Only call this function from task context */
+static void ams_pmu_set_register(u8 reg, u8 value)
+{
+ static struct adb_request req;
+ DECLARE_COMPLETION(req_complete);
+
+ req.arg = &req_complete;
+ if (pmu_request(&req, ams_pmu_req_complete, 4, ams_pmu_cmd, 0x00, reg, value))
+ return;
+
+ wait_for_completion(&req_complete);
+}
+
+/* Only call this function from task context */
+static u8 ams_pmu_get_register(u8 reg)
+{
+ static struct adb_request req;
+ DECLARE_COMPLETION(req_complete);
+
+ req.arg = &req_complete;
+ if (pmu_request(&req, ams_pmu_req_complete, 3, ams_pmu_cmd, 0x01, reg))
+ return 0;
+
+ wait_for_completion(&req_complete);
+
+ if (req.reply_len > 0)
+ return req.reply[0];
+ else
+ return 0;
+}
+
+/* Enables or disables the specified interrupts */
+static void ams_pmu_set_irq(enum ams_irq reg, char enable)
+{
+ if (reg & AMS_IRQ_FREEFALL) {
+ u8 val = ams_pmu_get_register(AMS_FF_ENABLE);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_pmu_set_register(AMS_FF_ENABLE, val);
+ }
+
+ if (reg & AMS_IRQ_SHOCK) {
+ u8 val = ams_pmu_get_register(AMS_SHOCK_ENABLE);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_pmu_set_register(AMS_SHOCK_ENABLE, val);
+ }
+
+ if (reg & AMS_IRQ_GLOBAL) {
+ u8 val = ams_pmu_get_register(AMS_CONTROL);
+ if (enable)
+ val |= 0x80;
+ else
+ val &= ~0x80;
+ ams_pmu_set_register(AMS_CONTROL, val);
+ }
+}
+
+static void ams_pmu_clear_irq(enum ams_irq reg)
+{
+ if (reg & AMS_IRQ_FREEFALL)
+ ams_pmu_set_register(AMS_FF_CLEAR, 0x00);
+
+ if (reg & AMS_IRQ_SHOCK)
+ ams_pmu_set_register(AMS_SHOCK_CLEAR, 0x00);
+}
+
+static u8 ams_pmu_get_vendor(void)
+{
+ return ams_pmu_get_register(AMS_VENDOR);
+}
+
+static void ams_pmu_get_xyz(s8 *x, s8 *y, s8 *z)
+{
+ *x = ams_pmu_get_register(AMS_X);
+ *y = ams_pmu_get_register(AMS_Y);
+ *z = ams_pmu_get_register(AMS_Z);
+}
+
+static void ams_pmu_exit(void)
+{
+ /* Disable interrupts */
+ ams_pmu_set_irq(AMS_IRQ_ALL, 0);
+
+ /* Clear interrupts */
+ ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+ ams_info.has_device = 0;
+
+ printk(KERN_INFO "ams: Unloading\n");
+}
+
+int __init ams_pmu_init(struct device_node *np)
+{
+ u32 *prop;
+ int result;
+
+ mutex_lock(&ams_info.lock);
+
+ /* Set implementation stuff */
+ ams_info.of_node = np;
+ ams_info.exit = ams_pmu_exit;
+ ams_info.get_vendor = ams_pmu_get_vendor;
+ ams_info.get_xyz = ams_pmu_get_xyz;
+ ams_info.clear_irq = ams_pmu_clear_irq;
+ ams_info.bustype = BUS_HOST;
+
+ /* Get PMU command, should be 0x4e, but we can never know */
+ prop = (u32*)get_property(ams_info.of_node, "reg", NULL);
+ if (!prop) {
+ result = -ENODEV;
+ goto exit;
+ }
+ ams_pmu_cmd = ((*prop) >> 8) & 0xff;
+
+ /* Disable interrupts */
+ ams_pmu_set_irq(AMS_IRQ_ALL, 0);
+
+ /* Clear interrupts */
+ ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+ result = ams_sensor_attach();
+ if (result < 0)
+ goto exit;
+
+ /* Set default values */
+ ams_pmu_set_register(AMS_FF_LOW_LIMIT, 0x15);
+ ams_pmu_set_register(AMS_FF_ENABLE, 0x08);
+ ams_pmu_set_register(AMS_FF_DEBOUNCE, 0x14);
+
+ ams_pmu_set_register(AMS_SHOCK_HIGH_LIMIT, 0x60);
+ ams_pmu_set_register(AMS_SHOCK_ENABLE, 0x0f);
+ ams_pmu_set_register(AMS_SHOCK_DEBOUNCE, 0x14);
+
+ ams_pmu_set_register(AMS_CONTROL, 0x4f);
+
+ /* Clear interrupts */
+ ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+ ams_info.has_device = 1;
+
+ /* Enable interrupts */
+ ams_pmu_set_irq(AMS_IRQ_ALL, 1);
+
+ printk(KERN_INFO "ams: Found PMU based motion sensor\n");
+
+ result = 0;
+
+exit:
+ mutex_unlock(&ams_info.lock);
+
+ return result;
+}
--- /dev/null
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <asm/of_device.h>
+
+enum ams_irq {
+ AMS_IRQ_FREEFALL = 0x01,
+ AMS_IRQ_SHOCK = 0x02,
+ AMS_IRQ_GLOBAL = 0x04,
+ AMS_IRQ_ALL =
+ AMS_IRQ_FREEFALL |
+ AMS_IRQ_SHOCK |
+ AMS_IRQ_GLOBAL,
+};
+
+struct ams {
+ /* Locks */
+ spinlock_t irq_lock;
+ struct mutex lock;
+
+ /* General properties */
+ struct device_node *of_node;
+ struct of_device *of_dev;
+ char has_device;
+ char vflag;
+ u32 orient1;
+ u32 orient2;
+
+ /* Interrupt worker */
+ struct work_struct worker;
+ u8 worker_irqs;
+
+ /* Implementation
+ *
+ * Only call these functions with the main lock held.
+ */
+ void (*exit)(void);
+
+ void (*get_xyz)(s8 *x, s8 *y, s8 *z);
+ u8 (*get_vendor)(void);
+
+ void (*clear_irq)(enum ams_irq reg);
+
+#ifdef CONFIG_SENSORS_AMS_I2C
+ /* I2C properties */
+ int i2c_bus;
+ int i2c_address;
+ struct i2c_client i2c_client;
+#endif
+
+ /* Joystick emulation */
+ struct task_struct *kthread;
+ struct input_dev *idev;
+ __u16 bustype;
+
+ /* calibrated null values */
+ int xcalib, ycalib, zcalib;
+};
+
+extern struct ams ams_info;
+
+extern void ams_sensors(s8 *x, s8 *y, s8 *z);
+extern int ams_sensor_attach(void);
+
+extern int ams_pmu_init(struct device_node *np);
+extern int ams_i2c_init(struct device_node *np);
+
+extern int ams_input_init(void);
+extern void ams_input_exit(void);
/*
- * f71805f.c - driver for the Fintek F71805F/FG Super-I/O chip integrated
- * hardware monitoring features
+ * f71805f.c - driver for the Fintek F71805F/FG and F71872F/FG Super-I/O
+ * chips integrated hardware monitoring features
* Copyright (C) 2005-2006 Jean Delvare <khali@linux-fr.org>
*
* The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates
* complete hardware monitoring features: voltage, fan and temperature
* sensors, and manual and automatic fan speed control.
*
+ * The F71872F/FG is almost the same, with two more voltages monitored,
+ * and 6 VID inputs.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
static struct platform_device *pdev;
#define DRVNAME "f71805f"
+enum kinds { f71805f, f71872f };
/*
* Super-I/O constants and functions
#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
#define SIO_REG_DEVREV 0x22 /* Device revision */
#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
+#define SIO_REG_FNSEL1 0x29 /* Multi Function Select 1 (F71872F) */
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_FINTEK_ID 0x1934
#define SIO_F71805F_ID 0x0406
+#define SIO_F71872F_ID 0x0341
static inline int
superio_inb(int base, int reg)
* ISA constants
*/
-#define REGION_LENGTH 2
-#define ADDR_REG_OFFSET 0
-#define DATA_REG_OFFSET 1
+#define REGION_LENGTH 8
+#define ADDR_REG_OFFSET 5
+#define DATA_REG_OFFSET 6
/*
* Registers
*/
-/* in nr from 0 to 8 (8-bit values) */
+/* in nr from 0 to 10 (8-bit values) */
#define F71805F_REG_IN(nr) (0x10 + (nr))
-#define F71805F_REG_IN_HIGH(nr) (0x40 + 2 * (nr))
-#define F71805F_REG_IN_LOW(nr) (0x41 + 2 * (nr))
+#define F71805F_REG_IN_HIGH(nr) ((nr) < 10 ? 0x40 + 2 * (nr) : 0x2E)
+#define F71805F_REG_IN_LOW(nr) ((nr) < 10 ? 0x41 + 2 * (nr) : 0x2F)
/* fan nr from 0 to 2 (12-bit values, two registers) */
#define F71805F_REG_FAN(nr) (0x20 + 2 * (nr))
#define F71805F_REG_FAN_LOW(nr) (0x28 + 2 * (nr))
+#define F71805F_REG_FAN_TARGET(nr) (0x69 + 16 * (nr))
#define F71805F_REG_FAN_CTRL(nr) (0x60 + 16 * (nr))
+#define F71805F_REG_PWM_FREQ(nr) (0x63 + 16 * (nr))
+#define F71805F_REG_PWM_DUTY(nr) (0x6B + 16 * (nr))
/* temp nr from 0 to 2 (8-bit values) */
#define F71805F_REG_TEMP(nr) (0x1B + (nr))
#define F71805F_REG_TEMP_HIGH(nr) (0x54 + 2 * (nr))
/* status nr from 0 to 2 */
#define F71805F_REG_STATUS(nr) (0x36 + (nr))
+/* individual register bits */
+#define FAN_CTRL_DC_MODE 0x10
+#define FAN_CTRL_LATCH_FULL 0x08
+#define FAN_CTRL_MODE_MASK 0x03
+#define FAN_CTRL_MODE_SPEED 0x00
+#define FAN_CTRL_MODE_TEMPERATURE 0x01
+#define FAN_CTRL_MODE_MANUAL 0x02
+
/*
* Data structures and manipulation thereof
*/
unsigned long last_limits; /* In jiffies */
/* Register values */
- u8 in[9];
- u8 in_high[9];
- u8 in_low[9];
+ u8 in[11];
+ u8 in_high[11];
+ u8 in_low[11];
+ u16 has_in;
u16 fan[3];
u16 fan_low[3];
- u8 fan_enabled; /* Read once at init time */
+ u16 fan_target[3];
+ u8 fan_ctrl[3];
+ u8 pwm[3];
+ u8 pwm_freq[3];
u8 temp[3];
u8 temp_high[3];
u8 temp_hyst[3];
unsigned long alarms;
};
+struct f71805f_sio_data {
+ enum kinds kind;
+ u8 fnsel1;
+};
+
static inline long in_from_reg(u8 reg)
{
return (reg * 8);
return (1500000 / rpm);
}
+static inline unsigned long pwm_freq_from_reg(u8 reg)
+{
+ unsigned long clock = (reg & 0x80) ? 48000000UL : 1000000UL;
+
+ reg &= 0x7f;
+ if (reg == 0)
+ reg++;
+ return clock / (reg << 8);
+}
+
+static inline u8 pwm_freq_to_reg(unsigned long val)
+{
+ if (val >= 187500) /* The highest we can do */
+ return 0x80;
+ if (val >= 1475) /* Use 48 MHz clock */
+ return 0x80 | (48000000UL / (val << 8));
+ if (val < 31) /* The lowest we can do */
+ return 0x7f;
+ else /* Use 1 MHz clock */
+ return 1000000UL / (val << 8);
+}
+
+static inline int pwm_mode_from_reg(u8 reg)
+{
+ return !(reg & FAN_CTRL_DC_MODE);
+}
+
static inline long temp_from_reg(u8 reg)
{
return (reg * 1000);
/* Limit registers cache is refreshed after 60 seconds */
if (time_after(jiffies, data->last_updated + 60 * HZ)
|| !data->valid) {
- for (nr = 0; nr < 9; nr++) {
+ for (nr = 0; nr < 11; nr++) {
+ if (!(data->has_in & (1 << nr)))
+ continue;
data->in_high[nr] = f71805f_read8(data,
F71805F_REG_IN_HIGH(nr));
data->in_low[nr] = f71805f_read8(data,
F71805F_REG_IN_LOW(nr));
}
for (nr = 0; nr < 3; nr++) {
- if (data->fan_enabled & (1 << nr))
- data->fan_low[nr] = f71805f_read16(data,
- F71805F_REG_FAN_LOW(nr));
+ data->fan_low[nr] = f71805f_read16(data,
+ F71805F_REG_FAN_LOW(nr));
+ data->fan_target[nr] = f71805f_read16(data,
+ F71805F_REG_FAN_TARGET(nr));
+ data->pwm_freq[nr] = f71805f_read8(data,
+ F71805F_REG_PWM_FREQ(nr));
}
for (nr = 0; nr < 3; nr++) {
data->temp_high[nr] = f71805f_read8(data,
/* Measurement registers cache is refreshed after 1 second */
if (time_after(jiffies, data->last_updated + HZ)
|| !data->valid) {
- for (nr = 0; nr < 9; nr++) {
+ for (nr = 0; nr < 11; nr++) {
+ if (!(data->has_in & (1 << nr)))
+ continue;
data->in[nr] = f71805f_read8(data,
F71805F_REG_IN(nr));
}
for (nr = 0; nr < 3; nr++) {
- if (data->fan_enabled & (1 << nr))
- data->fan[nr] = f71805f_read16(data,
- F71805F_REG_FAN(nr));
+ data->fan[nr] = f71805f_read16(data,
+ F71805F_REG_FAN(nr));
+ data->fan_ctrl[nr] = f71805f_read8(data,
+ F71805F_REG_FAN_CTRL(nr));
+ data->pwm[nr] = f71805f_read8(data,
+ F71805F_REG_PWM_DUTY(nr));
}
for (nr = 0; nr < 3; nr++) {
data->temp[nr] = f71805f_read8(data,
char *buf)
{
struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
- return sprintf(buf, "%ld\n", in0_from_reg(data->in[0]));
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in[nr]));
}
static ssize_t show_in0_max(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
- return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[0]));
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[nr]));
}
static ssize_t show_in0_min(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
- return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[0]));
+ return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[nr]));
}
static ssize_t set_in0_max(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
- data->in_high[0] = in0_to_reg(val);
- f71805f_write8(data, F71805F_REG_IN_HIGH(0), data->in_high[0]);
+ data->in_high[nr] = in0_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]);
mutex_unlock(&data->update_lock);
return count;
*devattr, const char *buf, size_t count)
{
struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
- data->in_low[0] = in0_to_reg(val);
- f71805f_write8(data, F71805F_REG_IN_LOW(0), data->in_low[0]);
+ data->in_low[nr] = in0_to_reg(val);
+ f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]);
mutex_unlock(&data->update_lock);
return count;
return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr]));
}
+static ssize_t show_fan_target(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%ld\n", fan_from_reg(data->fan_target[nr]));
+}
+
static ssize_t set_fan_min(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
return count;
}
+static ssize_t set_fan_target(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ long val = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->fan_target[nr] = fan_to_reg(val);
+ f71805f_write16(data, F71805F_REG_FAN_TARGET(nr),
+ data->fan_target[nr]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%d\n", (int)data->pwm[nr]);
+}
+
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ int mode;
+
+ switch (data->fan_ctrl[nr] & FAN_CTRL_MODE_MASK) {
+ case FAN_CTRL_MODE_SPEED:
+ mode = 3;
+ break;
+ case FAN_CTRL_MODE_TEMPERATURE:
+ mode = 2;
+ break;
+ default: /* MANUAL */
+ mode = 1;
+ }
+
+ return sprintf(buf, "%d\n", mode);
+}
+
+static ssize_t show_pwm_freq(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%lu\n", pwm_freq_from_reg(data->pwm_freq[nr]));
+}
+
+static ssize_t show_pwm_mode(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct f71805f_data *data = f71805f_update_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+
+ return sprintf(buf, "%d\n", pwm_mode_from_reg(data->fan_ctrl[nr]));
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ if (val > 255)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->pwm[nr] = val;
+ f71805f_write8(data, F71805F_REG_PWM_DUTY(nr), data->pwm[nr]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static struct attribute *f71805f_attr_pwm[];
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ u8 reg;
+
+ if (val < 1 || val > 3)
+ return -EINVAL;
+
+ if (val > 1) { /* Automatic mode, user can't set PWM value */
+ if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
+ S_IRUGO))
+ dev_dbg(dev, "chmod -w pwm%d failed\n", nr + 1);
+ }
+
+ mutex_lock(&data->update_lock);
+ reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(nr))
+ & ~FAN_CTRL_MODE_MASK;
+ switch (val) {
+ case 1:
+ reg |= FAN_CTRL_MODE_MANUAL;
+ break;
+ case 2:
+ reg |= FAN_CTRL_MODE_TEMPERATURE;
+ break;
+ case 3:
+ reg |= FAN_CTRL_MODE_SPEED;
+ break;
+ }
+ data->fan_ctrl[nr] = reg;
+ f71805f_write8(data, F71805F_REG_FAN_CTRL(nr), reg);
+ mutex_unlock(&data->update_lock);
+
+ if (val == 1) { /* Manual mode, user can set PWM value */
+ if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
+ S_IRUGO | S_IWUSR))
+ dev_dbg(dev, "chmod +w pwm%d failed\n", nr + 1);
+ }
+
+ return count;
+}
+
+static ssize_t set_pwm_freq(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct f71805f_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->pwm_freq[nr] = pwm_freq_to_reg(val);
+ f71805f_write8(data, F71805F_REG_PWM_FREQ(nr), data->pwm_freq[nr]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
char *buf)
{
{
struct f71805f_data *data = f71805f_update_device(dev);
- return sprintf(buf, "%lu\n", data->alarms & 0x1ff);
+ return sprintf(buf, "%lu\n", data->alarms & 0x7ff);
}
static ssize_t show_alarms_fan(struct device *dev, struct device_attribute
return sprintf(buf, "%s\n", data->name);
}
-static DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL);
-static DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max);
-static DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min);
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL, 0);
+static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR,
+ show_in0_max, set_in0_max, 0);
+static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR,
+ show_in0_min, set_in0_min, 0);
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR,
show_in_max, set_in_max, 1);
show_in_max, set_in_max, 8);
static SENSOR_DEVICE_ATTR(in8_min, S_IRUGO | S_IWUSR,
show_in_min, set_in_min, 8);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_in0, NULL, 9);
+static SENSOR_DEVICE_ATTR(in9_max, S_IRUGO | S_IWUSR,
+ show_in0_max, set_in0_max, 9);
+static SENSOR_DEVICE_ATTR(in9_min, S_IRUGO | S_IWUSR,
+ show_in0_min, set_in0_min, 9);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_in0, NULL, 10);
+static SENSOR_DEVICE_ATTR(in10_max, S_IRUGO | S_IWUSR,
+ show_in0_max, set_in0_max, 10);
+static SENSOR_DEVICE_ATTR(in10_min, S_IRUGO | S_IWUSR,
+ show_in0_min, set_in0_min, 10);
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR,
+ show_fan_target, set_fan_target, 0);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO | S_IWUSR,
+ show_fan_target, set_fan_target, 1);
static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
show_fan_min, set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan3_target, S_IRUGO | S_IWUSR,
+ show_fan_target, set_fan_target, 2);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
show_temp_hyst, set_temp_hyst, 2);
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2);
+/* pwm (value) files are created read-only, write permission is
+ then added or removed dynamically as needed */
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR,
+ show_pwm_freq, set_pwm_freq, 0);
+static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO | S_IWUSR,
+ show_pwm_freq, set_pwm_freq, 1);
+static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, show_pwm_mode, NULL, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO, show_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO | S_IWUSR,
+ show_pwm_freq, set_pwm_freq, 2);
+static SENSOR_DEVICE_ATTR(pwm3_mode, S_IRUGO, show_pwm_mode, NULL, 2);
+
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 7);
static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, 10);
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 11);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 12);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13);
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static struct attribute *f71805f_attributes[] = {
- &dev_attr_in0_input.attr,
- &dev_attr_in0_max.attr,
- &dev_attr_in0_min.attr,
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in3_max.dev_attr.attr,
&sensor_dev_attr_in3_min.dev_attr.attr,
- &sensor_dev_attr_in4_input.dev_attr.attr,
- &sensor_dev_attr_in4_max.dev_attr.attr,
- &sensor_dev_attr_in4_min.dev_attr.attr,
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in5_max.dev_attr.attr,
&sensor_dev_attr_in5_min.dev_attr.attr,
&sensor_dev_attr_in7_input.dev_attr.attr,
&sensor_dev_attr_in7_max.dev_attr.attr,
&sensor_dev_attr_in7_min.dev_attr.attr,
- &sensor_dev_attr_in8_input.dev_attr.attr,
- &sensor_dev_attr_in8_max.dev_attr.attr,
- &sensor_dev_attr_in8_min.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan1_target.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_target.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_target.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_mode.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_mode.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_mode.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_in1_alarm.dev_attr.attr,
&sensor_dev_attr_in2_alarm.dev_attr.attr,
&sensor_dev_attr_in3_alarm.dev_attr.attr,
- &sensor_dev_attr_in4_alarm.dev_attr.attr,
&sensor_dev_attr_in5_alarm.dev_attr.attr,
&sensor_dev_attr_in6_alarm.dev_attr.attr,
&sensor_dev_attr_in7_alarm.dev_attr.attr,
- &sensor_dev_attr_in8_alarm.dev_attr.attr,
&dev_attr_alarms_in.attr,
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
.attrs = f71805f_attributes,
};
-static struct attribute *f71805f_attributes_fan[3][4] = {
+static struct attribute *f71805f_attributes_optin[4][5] = {
{
- &sensor_dev_attr_fan1_input.dev_attr.attr,
- &sensor_dev_attr_fan1_min.dev_attr.attr,
- &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in8_max.dev_attr.attr,
+ &sensor_dev_attr_in8_min.dev_attr.attr,
+ &sensor_dev_attr_in8_alarm.dev_attr.attr,
NULL
}, {
- &sensor_dev_attr_fan2_input.dev_attr.attr,
- &sensor_dev_attr_fan2_min.dev_attr.attr,
- &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in9_input.dev_attr.attr,
+ &sensor_dev_attr_in9_max.dev_attr.attr,
+ &sensor_dev_attr_in9_min.dev_attr.attr,
+ &sensor_dev_attr_in9_alarm.dev_attr.attr,
NULL
}, {
- &sensor_dev_attr_fan3_input.dev_attr.attr,
- &sensor_dev_attr_fan3_min.dev_attr.attr,
- &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in10_input.dev_attr.attr,
+ &sensor_dev_attr_in10_max.dev_attr.attr,
+ &sensor_dev_attr_in10_min.dev_attr.attr,
+ &sensor_dev_attr_in10_alarm.dev_attr.attr,
NULL
}
};
-static const struct attribute_group f71805f_group_fan[3] = {
- { .attrs = f71805f_attributes_fan[0] },
- { .attrs = f71805f_attributes_fan[1] },
- { .attrs = f71805f_attributes_fan[2] },
+static const struct attribute_group f71805f_group_optin[4] = {
+ { .attrs = f71805f_attributes_optin[0] },
+ { .attrs = f71805f_attributes_optin[1] },
+ { .attrs = f71805f_attributes_optin[2] },
+ { .attrs = f71805f_attributes_optin[3] },
+};
+
+/* We don't include pwm_freq files in the arrays above, because they must be
+ created conditionally (only if pwm_mode is 1 == PWM) */
+static struct attribute *f71805f_attributes_pwm_freq[] = {
+ &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm3_freq.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group f71805f_group_pwm_freq = {
+ .attrs = f71805f_attributes_pwm_freq,
+};
+
+/* We also need an indexed access to pwmN files to toggle writability */
+static struct attribute *f71805f_attr_pwm[] = {
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
};
/*
/* Fan monitoring can be disabled. If it is, we won't be polling
the register values, and won't create the related sysfs files. */
for (i = 0; i < 3; i++) {
- reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(i));
- if (!(reg & 0x80))
- data->fan_enabled |= (1 << i);
+ data->fan_ctrl[i] = f71805f_read8(data,
+ F71805F_REG_FAN_CTRL(i));
+ /* Clear latch full bit, else "speed mode" fan speed control
+ doesn't work */
+ if (data->fan_ctrl[i] & FAN_CTRL_LATCH_FULL) {
+ data->fan_ctrl[i] &= ~FAN_CTRL_LATCH_FULL;
+ f71805f_write8(data, F71805F_REG_FAN_CTRL(i),
+ data->fan_ctrl[i]);
+ }
}
}
static int __devinit f71805f_probe(struct platform_device *pdev)
{
+ struct f71805f_sio_data *sio_data = pdev->dev.platform_data;
struct f71805f_data *data;
struct resource *res;
int i, err;
+ static const char *names[] = {
+ "f71805f",
+ "f71872f",
+ };
+
if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Out of memory\n");
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
data->addr = res->start;
mutex_init(&data->lock);
- data->name = "f71805f";
+ data->name = names[sio_data->kind];
mutex_init(&data->update_lock);
platform_set_drvdata(pdev, data);
+ /* Some voltage inputs depend on chip model and configuration */
+ switch (sio_data->kind) {
+ case f71805f:
+ data->has_in = 0x1ff;
+ break;
+ case f71872f:
+ data->has_in = 0x6ef;
+ if (sio_data->fnsel1 & 0x01)
+ data->has_in |= (1 << 4); /* in4 */
+ if (sio_data->fnsel1 & 0x02)
+ data->has_in |= (1 << 8); /* in8 */
+ break;
+ }
+
/* Initialize the F71805F chip */
f71805f_init_device(data);
/* Register sysfs interface files */
if ((err = sysfs_create_group(&pdev->dev.kobj, &f71805f_group)))
goto exit_free;
- for (i = 0; i < 3; i++) {
- if (!(data->fan_enabled & (1 << i)))
- continue;
+ if (data->has_in & (1 << 4)) { /* in4 */
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
+ &f71805f_group_optin[0])))
+ goto exit_remove_files;
+ }
+ if (data->has_in & (1 << 8)) { /* in8 */
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
+ &f71805f_group_optin[1])))
+ goto exit_remove_files;
+ }
+ if (data->has_in & (1 << 9)) { /* in9 (F71872F/FG only) */
if ((err = sysfs_create_group(&pdev->dev.kobj,
- &f71805f_group_fan[i])))
+ &f71805f_group_optin[2])))
goto exit_remove_files;
}
+ if (data->has_in & (1 << 10)) { /* in9 (F71872F/FG only) */
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
+ &f71805f_group_optin[3])))
+ goto exit_remove_files;
+ }
+ for (i = 0; i < 3; i++) {
+ /* If control mode is PWM, create pwm_freq file */
+ if (!(data->fan_ctrl[i] & FAN_CTRL_DC_MODE)) {
+ if ((err = sysfs_create_file(&pdev->dev.kobj,
+ f71805f_attributes_pwm_freq[i])))
+ goto exit_remove_files;
+ }
+ /* If PWM is in manual mode, add write permission */
+ if (data->fan_ctrl[i] & FAN_CTRL_MODE_MANUAL) {
+ if ((err = sysfs_chmod_file(&pdev->dev.kobj,
+ f71805f_attr_pwm[i],
+ S_IRUGO | S_IWUSR))) {
+ dev_err(&pdev->dev, "chmod +w pwm%d failed\n",
+ i + 1);
+ goto exit_remove_files;
+ }
+ }
+ }
data->class_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->class_dev)) {
exit_remove_files:
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
- for (i = 0; i < 3; i++)
- sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_fan[i]);
+ for (i = 0; i < 4; i++)
+ sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
exit_free:
platform_set_drvdata(pdev, NULL);
kfree(data);
platform_set_drvdata(pdev, NULL);
hwmon_device_unregister(data->class_dev);
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
- for (i = 0; i < 3; i++)
- sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_fan[i]);
+ for (i = 0; i < 4; i++)
+ sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
+ sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
kfree(data);
return 0;
.remove = __devexit_p(f71805f_remove),
};
-static int __init f71805f_device_add(unsigned short address)
+static int __init f71805f_device_add(unsigned short address,
+ const struct f71805f_sio_data *sio_data)
{
struct resource res = {
.start = address,
goto exit_device_put;
}
+ pdev->dev.platform_data = kmalloc(sizeof(struct f71805f_sio_data),
+ GFP_KERNEL);
+ if (!pdev->dev.platform_data) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ goto exit_device_put;
+ }
+ memcpy(pdev->dev.platform_data, sio_data,
+ sizeof(struct f71805f_sio_data));
+
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
err);
- goto exit_device_put;
+ goto exit_kfree_data;
}
return 0;
+exit_kfree_data:
+ kfree(pdev->dev.platform_data);
+ pdev->dev.platform_data = NULL;
exit_device_put:
platform_device_put(pdev);
exit:
return err;
}
-static int __init f71805f_find(int sioaddr, unsigned short *address)
+static int __init f71805f_find(int sioaddr, unsigned short *address,
+ struct f71805f_sio_data *sio_data)
{
int err = -ENODEV;
u16 devid;
+ static const char *names[] = {
+ "F71805F/FG",
+ "F71872F/FG",
+ };
+
superio_enter(sioaddr);
devid = superio_inw(sioaddr, SIO_REG_MANID);
goto exit;
devid = superio_inw(sioaddr, SIO_REG_DEVID);
- if (devid != SIO_F71805F_ID) {
+ switch (devid) {
+ case SIO_F71805F_ID:
+ sio_data->kind = f71805f;
+ break;
+ case SIO_F71872F_ID:
+ sio_data->kind = f71872f;
+ sio_data->fnsel1 = superio_inb(sioaddr, SIO_REG_FNSEL1);
+ break;
+ default:
printk(KERN_INFO DRVNAME ": Unsupported Fintek device, "
"skipping\n");
goto exit;
"skipping\n");
goto exit;
}
+ *address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
err = 0;
- printk(KERN_INFO DRVNAME ": Found F71805F chip at %#x, revision %u\n",
- *address, superio_inb(sioaddr, SIO_REG_DEVREV));
+ printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %u\n",
+ names[sio_data->kind], *address,
+ superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
superio_exit(sioaddr);
{
int err;
unsigned short address;
+ struct f71805f_sio_data sio_data;
- if (f71805f_find(0x2e, &address)
- && f71805f_find(0x4e, &address))
+ if (f71805f_find(0x2e, &address, &sio_data)
+ && f71805f_find(0x4e, &address, &sio_data))
return -ENODEV;
err = platform_driver_register(&f71805f_driver);
goto exit;
/* Sets global pdev as a side effect */
- err = f71805f_device_add(address);
+ err = f71805f_device_add(address, &sio_data);
if (err)
goto exit_driver;
static void __exit f71805f_exit(void)
{
+ kfree(pdev->dev.platform_data);
+ pdev->dev.platform_data = NULL;
platform_device_unregister(pdev);
+
platform_driver_unregister(&f71805f_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr>");
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("F71805F hardware monitoring driver");
+MODULE_DESCRIPTION("F71805F/F71872F hardware monitoring driver");
module_init(f71805f_init);
module_exit(f71805f_exit);
/* Module stuff */
/* hdaps_dmi_match - found a match. return one, short-circuiting the hunt. */
-static int hdaps_dmi_match(struct dmi_system_id *id)
+static int __init hdaps_dmi_match(struct dmi_system_id *id)
{
printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
return 1;
}
/* hdaps_dmi_match_invert - found an inverted match. */
-static int hdaps_dmi_match_invert(struct dmi_system_id *id)
+static int __init hdaps_dmi_match_invert(struct dmi_system_id *id)
{
hdaps_invert = 1;
printk(KERN_INFO "hdaps: inverting axis readings.\n");
return hdaps_dmi_match(id);
}
-#define HDAPS_DMI_MATCH_NORMAL(model) { \
- .ident = "IBM " model, \
+#define HDAPS_DMI_MATCH_NORMAL(vendor, model) { \
+ .ident = vendor " " model, \
.callback = hdaps_dmi_match, \
.matches = { \
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), \
+ DMI_MATCH(DMI_BOARD_VENDOR, vendor), \
DMI_MATCH(DMI_PRODUCT_VERSION, model) \
} \
}
-#define HDAPS_DMI_MATCH_INVERT(model) { \
- .ident = "IBM " model, \
+#define HDAPS_DMI_MATCH_INVERT(vendor, model) { \
+ .ident = vendor " " model, \
.callback = hdaps_dmi_match_invert, \
.matches = { \
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), \
+ DMI_MATCH(DMI_BOARD_VENDOR, vendor), \
DMI_MATCH(DMI_PRODUCT_VERSION, model) \
} \
}
-#define HDAPS_DMI_MATCH_LENOVO(model) { \
- .ident = "Lenovo " model, \
- .callback = hdaps_dmi_match_invert, \
- .matches = { \
- DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), \
- DMI_MATCH(DMI_PRODUCT_VERSION, model) \
- } \
-}
+/* Note that HDAPS_DMI_MATCH_NORMAL("ThinkPad T42") would match
+ "ThinkPad T42p", so the order of the entries matters.
+ If your ThinkPad is not recognized, please update to latest
+ BIOS. This is especially the case for some R52 ThinkPads. */
+static struct dmi_system_id __initdata hdaps_whitelist[] = {
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad R50p"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
+ HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
+ HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"),
+ { .ident = NULL }
+};
static int __init hdaps_init(void)
{
int ret;
- /* Note that HDAPS_DMI_MATCH_NORMAL("ThinkPad T42") would match
- "ThinkPad T42p", so the order of the entries matters */
- struct dmi_system_id hdaps_whitelist[] = {
- HDAPS_DMI_MATCH_NORMAL("ThinkPad H"),
- HDAPS_DMI_MATCH_INVERT("ThinkPad R50p"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad R50"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad R51"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad R52"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad H"), /* R52 (1846AQG) */
- HDAPS_DMI_MATCH_INVERT("ThinkPad T41p"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad T41"),
- HDAPS_DMI_MATCH_INVERT("ThinkPad T42p"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
- HDAPS_DMI_MATCH_LENOVO("ThinkPad T60p"),
- HDAPS_DMI_MATCH_LENOVO("ThinkPad T60"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad X41"),
- HDAPS_DMI_MATCH_LENOVO("ThinkPad X60"),
- HDAPS_DMI_MATCH_NORMAL("ThinkPad Z60m"),
- { .ident = NULL }
- };
-
if (!dmi_check_system(hdaps_whitelist)) {
printk(KERN_WARNING "hdaps: supported laptop not found!\n");
ret = -ENODEV;
/*
hwmon-vid.c - VID/VRM/VRD voltage conversions
- Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
+ Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
Partly imported from i2c-vid.h of the lm_sensors project
Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
EXPORT_SYMBOL(vid_from_reg);
EXPORT_SYMBOL(vid_which_vrm);
-MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
MODULE_DESCRIPTION("hwmon-vid driver");
MODULE_LICENSE("GPL");
monitoring.
Supports: IT8705F Super I/O chip w/LPC interface
- IT8712F Super I/O chip w/LPC interface & SMBus
+ IT8712F Super I/O chip w/LPC interface
IT8716F Super I/O chip w/LPC interface
IT8718F Super I/O chip w/LPC interface
Sis950 A clone of the IT8705F
#include <asm/io.h>
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
static unsigned short isa_address;
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_4(it87, it8712, it8716, it8718);
+enum chips { it87, it8712, it8716, it8718 };
#define REG 0x2e /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2)
-#define IT87_REG_I2C_ADDR 0x48
-
#define IT87_REG_VIN_ENABLE 0x50
#define IT87_REG_TEMP_ENABLE 0x51
};
-static int it87_attach_adapter(struct i2c_adapter *adapter);
-static int it87_isa_attach_adapter(struct i2c_adapter *adapter);
-static int it87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int it87_detect(struct i2c_adapter *adapter);
static int it87_detach_client(struct i2c_client *client);
static int it87_read_value(struct i2c_client *client, u8 reg);
-static int it87_write_value(struct i2c_client *client, u8 reg, u8 value);
+static void it87_write_value(struct i2c_client *client, u8 reg, u8 value);
static struct it87_data *it87_update_device(struct device *dev);
static int it87_check_pwm(struct i2c_client *client);
static void it87_init_client(struct i2c_client *client, struct it87_data *data);
-static struct i2c_driver it87_driver = {
- .driver = {
- .name = "it87",
- },
- .id = I2C_DRIVERID_IT87,
- .attach_adapter = it87_attach_adapter,
- .detach_client = it87_detach_client,
-};
-
static struct i2c_driver it87_isa_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "it87-isa",
},
- .attach_adapter = it87_isa_attach_adapter,
+ .attach_adapter = it87_detect,
.detach_client = it87_detach_client,
};
.attrs = it87_attributes_opt,
};
-/* This function is called when:
- * it87_driver is inserted (when this module is loaded), for each
- available adapter
- * when a new adapter is inserted (and it87_driver is still present) */
-static int it87_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, it87_detect);
-}
-
-static int it87_isa_attach_adapter(struct i2c_adapter *adapter)
-{
- return it87_detect(adapter, isa_address, -1);
-}
-
/* SuperIO detection - will change isa_address if a chip is found */
static int __init it87_find(unsigned short *address)
{
}
/* This function is called by i2c_probe */
-static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
+static int it87_detect(struct i2c_adapter *adapter)
{
- int i;
struct i2c_client *new_client;
struct it87_data *data;
int err = 0;
- const char *name = "";
- int is_isa = i2c_is_isa_adapter(adapter);
+ const char *name;
int enable_pwm_interface;
- if (!is_isa &&
- !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto ERROR0;
-
/* Reserve the ISA region */
- if (is_isa)
- if (!request_region(address, IT87_EXTENT,
- it87_isa_driver.driver.name))
- goto ERROR0;
-
- /* For now, we presume we have a valid client. We create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access it87_{read,write}_value. */
+ if (!request_region(isa_address, IT87_EXTENT,
+ it87_isa_driver.driver.name)){
+ err = -EBUSY;
+ goto ERROR0;
+ }
if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) {
err = -ENOMEM;
}
new_client = &data->client;
- if (is_isa)
- mutex_init(&data->lock);
+ mutex_init(&data->lock);
i2c_set_clientdata(new_client, data);
- new_client->addr = address;
+ new_client->addr = isa_address;
new_client->adapter = adapter;
- new_client->driver = is_isa ? &it87_isa_driver : &it87_driver;
- new_client->flags = 0;
+ new_client->driver = &it87_isa_driver;
/* Now, we do the remaining detection. */
-
- if (kind < 0) {
- if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
- || (!is_isa
- && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) {
- err = -ENODEV;
- goto ERROR2;
- }
+ if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
+ || it87_read_value(new_client, IT87_REG_CHIPID) != 0x90) {
+ err = -ENODEV;
+ goto ERROR2;
}
/* Determine the chip type. */
- if (kind <= 0) {
- i = it87_read_value(new_client, IT87_REG_CHIPID);
- if (i == 0x90) {
- kind = it87;
- if (is_isa) {
- switch (chip_type) {
- case IT8712F_DEVID:
- kind = it8712;
- break;
- case IT8716F_DEVID:
- kind = it8716;
- break;
- case IT8718F_DEVID:
- kind = it8718;
- break;
- }
- }
- }
- else {
- if (kind == 0)
- dev_info(&adapter->dev,
- "Ignoring 'force' parameter for unknown chip at "
- "adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
- err = -ENODEV;
- goto ERROR2;
- }
- }
-
- if (kind == it87) {
- name = "it87";
- } else if (kind == it8712) {
+ switch (chip_type) {
+ case IT8712F_DEVID:
+ data->type = it8712;
name = "it8712";
- } else if (kind == it8716) {
+ break;
+ case IT8716F_DEVID:
+ data->type = it8716;
name = "it8716";
- } else if (kind == it8718) {
+ break;
+ case IT8718F_DEVID:
+ data->type = it8718;
name = "it8718";
+ break;
+ default:
+ data->type = it87;
+ name = "it87";
}
/* Fill in the remaining client fields and put it into the global list */
strlcpy(new_client->name, name, I2C_NAME_SIZE);
- data->type = kind;
- data->valid = 0;
mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR2;
- if (!is_isa)
- dev_info(&new_client->dev, "The I2C interface to IT87xxF "
- "hardware monitoring chips is deprecated. Please "
- "report if you still rely on it.\n");
-
/* Check PWM configuration */
enable_pwm_interface = it87_check_pwm(new_client);
ERROR2:
kfree(data);
ERROR1:
- if (is_isa)
- release_region(address, IT87_EXTENT);
+ release_region(isa_address, IT87_EXTENT);
ERROR0:
return err;
}
if ((err = i2c_detach_client(client)))
return err;
- if(i2c_is_isa_client(client))
- release_region(client->addr, IT87_EXTENT);
+ release_region(client->addr, IT87_EXTENT);
kfree(data);
return 0;
}
-/* The SMBus locks itself, but ISA access must be locked explicitly!
- We don't want to lock the whole ISA bus, so we lock each client
- separately.
+/* ISA access must be locked explicitly!
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
would slow down the IT87 access and should not be necessary. */
static int it87_read_value(struct i2c_client *client, u8 reg)
{
struct it87_data *data = i2c_get_clientdata(client);
-
int res;
- if (i2c_is_isa_client(client)) {
- mutex_lock(&data->lock);
- outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
- res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
- mutex_unlock(&data->lock);
- return res;
- } else
- return i2c_smbus_read_byte_data(client, reg);
+
+ mutex_lock(&data->lock);
+ outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+ res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
+ mutex_unlock(&data->lock);
+
+ return res;
}
-/* The SMBus locks itself, but ISA access muse be locked explicitly!
- We don't want to lock the whole ISA bus, so we lock each client
- separately.
+/* ISA access must be locked explicitly!
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
would slow down the IT87 access and should not be necessary. */
-static int it87_write_value(struct i2c_client *client, u8 reg, u8 value)
+static void it87_write_value(struct i2c_client *client, u8 reg, u8 value)
{
struct it87_data *data = i2c_get_clientdata(client);
- if (i2c_is_isa_client(client)) {
- mutex_lock(&data->lock);
- outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
- outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
- mutex_unlock(&data->lock);
- return 0;
- } else
- return i2c_smbus_write_byte_data(client, reg, value);
+ mutex_lock(&data->lock);
+ outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+ outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
+ mutex_unlock(&data->lock);
}
/* Return 1 if and only if the PWM interface is safe to use */
{
int res;
- res = i2c_add_driver(&it87_driver);
- if (res)
+ if ((res = it87_find(&isa_address)))
return res;
-
- if (!it87_find(&isa_address)) {
- res = i2c_isa_add_driver(&it87_isa_driver);
- if (res) {
- i2c_del_driver(&it87_driver);
- return res;
- }
- }
-
- return 0;
+ return i2c_isa_add_driver(&it87_isa_driver);
}
static void __exit sm_it87_exit(void)
{
- if (isa_address)
- i2c_isa_del_driver(&it87_isa_driver);
- i2c_del_driver(&it87_driver);
+ i2c_isa_del_driver(&it87_isa_driver);
}
/*
* k8temp.c - Linux kernel module for hardware monitoring
*
- * Copyright (C) 2006 Rudolf Marek <r.marek@sh.cvut.cz>
+ * Copyright (C) 2006 Rudolf Marek <r.marek@assembler.cz>
*
* Inspired from the w83785 and amd756 drivers.
*
pci_unregister_driver(&k8temp_driver);
}
-MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
MODULE_DESCRIPTION("AMD K8 core temperature monitor");
MODULE_LICENSE("GPL");
(i&0x02) ? "external" : "internal");
data->vid_conf = confreg[3];
- data->vrm = 90;
+ data->vrm = vid_which_vrm();
}
/* Fan clock dividers may be needed before any data is read */
--- /dev/null
+/*
+ * pc87427.c - hardware monitoring driver for the
+ * National Semiconductor PC87427 Super-I/O chip
+ * Copyright (C) 2006 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Supports the following chips:
+ *
+ * Chip #vin #fan #pwm #temp devid
+ * PC87427 - 8 - - 0xF2
+ *
+ * This driver assumes that no more than one chip is present.
+ * Only fan inputs are supported so far, although the chip can do much more.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <asm/io.h>
+
+static struct platform_device *pdev;
+
+#define DRVNAME "pc87427"
+
+/* The lock mutex protects both the I/O accesses (needed because the
+ device is using banked registers) and the register cache (needed to keep
+ the data in the registers and the cache in sync at any time). */
+struct pc87427_data {
+ struct class_device *class_dev;
+ struct mutex lock;
+ int address[2];
+ const char *name;
+
+ unsigned long last_updated; /* in jiffies */
+ u8 fan_enabled; /* bit vector */
+ u16 fan[8]; /* register values */
+ u16 fan_min[8]; /* register values */
+ u8 fan_status[8]; /* register values */
+};
+
+/*
+ * Super-I/O registers and operations
+ */
+
+#define SIOREG_LDSEL 0x07 /* Logical device select */
+#define SIOREG_DEVID 0x20 /* Device ID */
+#define SIOREG_ACT 0x30 /* Device activation */
+#define SIOREG_MAP 0x50 /* I/O or memory mapping */
+#define SIOREG_IOBASE 0x60 /* I/O base address */
+
+static const u8 logdev[2] = { 0x09, 0x14 };
+static const char *logdev_str[2] = { DRVNAME " FMC", DRVNAME " HMC" };
+#define LD_FAN 0
+#define LD_IN 1
+#define LD_TEMP 1
+
+static inline void superio_outb(int sioaddr, int reg, int val)
+{
+ outb(reg, sioaddr);
+ outb(val, sioaddr + 1);
+}
+
+static inline int superio_inb(int sioaddr, int reg)
+{
+ outb(reg, sioaddr);
+ return inb(sioaddr + 1);
+}
+
+static inline void superio_exit(int sioaddr)
+{
+ outb(0x02, sioaddr);
+ outb(0x02, sioaddr + 1);
+}
+
+/*
+ * Logical devices
+ */
+
+#define REGION_LENGTH 32
+#define PC87427_REG_BANK 0x0f
+#define BANK_FM(nr) (nr)
+#define BANK_FT(nr) (0x08 + (nr))
+#define BANK_FC(nr) (0x10 + (nr) * 2)
+
+/*
+ * I/O access functions
+ */
+
+/* ldi is the logical device index */
+static inline int pc87427_read8(struct pc87427_data *data, u8 ldi, u8 reg)
+{
+ return inb(data->address[ldi] + reg);
+}
+
+/* Must be called with data->lock held, except during init */
+static inline int pc87427_read8_bank(struct pc87427_data *data, u8 ldi,
+ u8 bank, u8 reg)
+{
+ outb(bank, data->address[ldi] + PC87427_REG_BANK);
+ return inb(data->address[ldi] + reg);
+}
+
+/* Must be called with data->lock held, except during init */
+static inline void pc87427_write8_bank(struct pc87427_data *data, u8 ldi,
+ u8 bank, u8 reg, u8 value)
+{
+ outb(bank, data->address[ldi] + PC87427_REG_BANK);
+ outb(value, data->address[ldi] + reg);
+}
+
+/*
+ * Fan registers and conversions
+ */
+
+/* fan data registers are 16-bit wide */
+#define PC87427_REG_FAN 0x12
+#define PC87427_REG_FAN_MIN 0x14
+#define PC87427_REG_FAN_STATUS 0x10
+
+#define FAN_STATUS_STALL (1 << 3)
+#define FAN_STATUS_LOSPD (1 << 1)
+#define FAN_STATUS_MONEN (1 << 0)
+
+/* Dedicated function to read all registers related to a given fan input.
+ This saves us quite a few locks and bank selections.
+ Must be called with data->lock held.
+ nr is from 0 to 7 */
+static void pc87427_readall_fan(struct pc87427_data *data, u8 nr)
+{
+ int iobase = data->address[LD_FAN];
+
+ outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
+ data->fan[nr] = inw(iobase + PC87427_REG_FAN);
+ data->fan_min[nr] = inw(iobase + PC87427_REG_FAN_MIN);
+ data->fan_status[nr] = inb(iobase + PC87427_REG_FAN_STATUS);
+ /* Clear fan alarm bits */
+ outb(data->fan_status[nr], iobase + PC87427_REG_FAN_STATUS);
+}
+
+/* The 2 LSB of fan speed registers are used for something different.
+ The actual 2 LSB of the measurements are not available. */
+static inline unsigned long fan_from_reg(u16 reg)
+{
+ reg &= 0xfffc;
+ if (reg == 0x0000 || reg == 0xfffc)
+ return 0;
+ return 5400000UL / reg;
+}
+
+/* The 2 LSB of the fan speed limit registers are not significant. */
+static inline u16 fan_to_reg(unsigned long val)
+{
+ if (val < 83UL)
+ return 0xffff;
+ if (val >= 1350000UL)
+ return 0x0004;
+ return ((1350000UL + val / 2) / val) << 2;
+}
+
+/*
+ * Data interface
+ */
+
+static struct pc87427_data *pc87427_update_device(struct device *dev)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+ int i;
+
+ mutex_lock(&data->lock);
+ if (!time_after(jiffies, data->last_updated + HZ)
+ && data->last_updated)
+ goto done;
+
+ /* Fans */
+ for (i = 0; i < 8; i++) {
+ if (!(data->fan_enabled & (1 << i)))
+ continue;
+ pc87427_readall_fan(data, i);
+ }
+ data->last_updated = jiffies;
+
+done:
+ mutex_unlock(&data->lock);
+ return data;
+}
+
+static ssize_t show_fan_input(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = attr->index;
+
+ return sprintf(buf, "%lu\n", fan_from_reg(data->fan[nr]));
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = attr->index;
+
+ return sprintf(buf, "%lu\n", fan_from_reg(data->fan_min[nr]));
+}
+
+static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = attr->index;
+
+ return sprintf(buf, "%d\n", !!(data->fan_status[nr]
+ & FAN_STATUS_LOSPD));
+}
+
+static ssize_t show_fan_fault(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct pc87427_data *data = pc87427_update_device(dev);
+ int nr = attr->index;
+
+ return sprintf(buf, "%d\n", !!(data->fan_status[nr]
+ & FAN_STATUS_STALL));
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ int nr = attr->index;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ int iobase = data->address[LD_FAN];
+
+ mutex_lock(&data->lock);
+ outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
+ /* The low speed limit registers are read-only while monitoring
+ is enabled, so we have to disable monitoring, then change the
+ limit, and finally enable monitoring again. */
+ outb(0, iobase + PC87427_REG_FAN_STATUS);
+ data->fan_min[nr] = fan_to_reg(val);
+ outw(data->fan_min[nr], iobase + PC87427_REG_FAN_MIN);
+ outb(FAN_STATUS_MONEN, iobase + PC87427_REG_FAN_STATUS);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan_input, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan_input, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan_input, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan_input, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan_input, NULL, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 3);
+static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 4);
+static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 5);
+static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 6);
+static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO,
+ show_fan_min, set_fan_min, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_fan_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_fan_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_fan_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_fan_alarm, NULL, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_fault, S_IRUGO, show_fan_fault, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_fault, S_IRUGO, show_fan_fault, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_fault, S_IRUGO, show_fan_fault, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_fault, S_IRUGO, show_fan_fault, NULL, 7);
+
+static struct attribute *pc87427_attributes_fan[8][5] = {
+ {
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan1_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan4_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan5_input.dev_attr.attr,
+ &sensor_dev_attr_fan5_min.dev_attr.attr,
+ &sensor_dev_attr_fan5_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan5_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan6_input.dev_attr.attr,
+ &sensor_dev_attr_fan6_min.dev_attr.attr,
+ &sensor_dev_attr_fan6_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan6_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan7_input.dev_attr.attr,
+ &sensor_dev_attr_fan7_min.dev_attr.attr,
+ &sensor_dev_attr_fan7_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan7_fault.dev_attr.attr,
+ NULL
+ }, {
+ &sensor_dev_attr_fan8_input.dev_attr.attr,
+ &sensor_dev_attr_fan8_min.dev_attr.attr,
+ &sensor_dev_attr_fan8_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan8_fault.dev_attr.attr,
+ NULL
+ }
+};
+
+static const struct attribute_group pc87427_group_fan[8] = {
+ { .attrs = pc87427_attributes_fan[0] },
+ { .attrs = pc87427_attributes_fan[1] },
+ { .attrs = pc87427_attributes_fan[2] },
+ { .attrs = pc87427_attributes_fan[3] },
+ { .attrs = pc87427_attributes_fan[4] },
+ { .attrs = pc87427_attributes_fan[5] },
+ { .attrs = pc87427_attributes_fan[6] },
+ { .attrs = pc87427_attributes_fan[7] },
+};
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+
+/*
+ * Device detection, attach and detach
+ */
+
+static void __devinit pc87427_init_device(struct device *dev)
+{
+ struct pc87427_data *data = dev_get_drvdata(dev);
+ int i;
+ u8 reg;
+
+ /* The FMC module should be ready */
+ reg = pc87427_read8(data, LD_FAN, PC87427_REG_BANK);
+ if (!(reg & 0x80))
+ dev_warn(dev, "FMC module not ready!\n");
+
+ /* Check which fans are enabled */
+ for (i = 0; i < 8; i++) {
+ reg = pc87427_read8_bank(data, LD_FAN, BANK_FM(i),
+ PC87427_REG_FAN_STATUS);
+ if (reg & FAN_STATUS_MONEN)
+ data->fan_enabled |= (1 << i);
+ }
+
+ if (!data->fan_enabled) {
+ dev_dbg(dev, "Enabling all fan inputs\n");
+ for (i = 0; i < 8; i++)
+ pc87427_write8_bank(data, LD_FAN, BANK_FM(i),
+ PC87427_REG_FAN_STATUS,
+ FAN_STATUS_MONEN);
+ data->fan_enabled = 0xff;
+ }
+}
+
+static int __devinit pc87427_probe(struct platform_device *pdev)
+{
+ struct pc87427_data *data;
+ struct resource *res;
+ int i, err;
+
+ if (!(data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Out of memory\n");
+ goto exit;
+ }
+
+ /* This will need to be revisited when we add support for
+ temperature and voltage monitoring. */
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ data->address[0] = res->start;
+
+ mutex_init(&data->lock);
+ data->name = "pc87427";
+ platform_set_drvdata(pdev, data);
+ pc87427_init_device(&pdev->dev);
+
+ /* Register sysfs hooks */
+ if ((err = device_create_file(&pdev->dev, &dev_attr_name)))
+ goto exit_kfree;
+ for (i = 0; i < 8; i++) {
+ if (!(data->fan_enabled & (1 << i)))
+ continue;
+ if ((err = sysfs_create_group(&pdev->dev.kobj,
+ &pc87427_group_fan[i])))
+ goto exit_remove_files;
+ }
+
+ data->class_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
+ goto exit_remove_files;
+ }
+
+ return 0;
+
+exit_remove_files:
+ for (i = 0; i < 8; i++) {
+ if (!(data->fan_enabled & (1 << i)))
+ continue;
+ sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
+ }
+exit_kfree:
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+exit:
+ return err;
+}
+
+static int __devexit pc87427_remove(struct platform_device *pdev)
+{
+ struct pc87427_data *data = platform_get_drvdata(pdev);
+ int i;
+
+ platform_set_drvdata(pdev, NULL);
+ hwmon_device_unregister(data->class_dev);
+ device_remove_file(&pdev->dev, &dev_attr_name);
+ for (i = 0; i < 8; i++) {
+ if (!(data->fan_enabled & (1 << i)))
+ continue;
+ sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
+ }
+ kfree(data);
+
+ return 0;
+}
+
+
+static struct platform_driver pc87427_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = pc87427_probe,
+ .remove = __devexit_p(pc87427_remove),
+};
+
+static int __init pc87427_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + REGION_LENGTH - 1,
+ .name = logdev_str[0],
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ pdev = platform_device_alloc(DRVNAME, address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+static int __init pc87427_find(int sioaddr, unsigned short *address)
+{
+ u16 val;
+ int i, err = 0;
+
+ /* Identify device */
+ val = superio_inb(sioaddr, SIOREG_DEVID);
+ if (val != 0xf2) { /* PC87427 */
+ err = -ENODEV;
+ goto exit;
+ }
+
+ for (i = 0; i < 2; i++) {
+ address[i] = 0;
+ /* Select logical device */
+ superio_outb(sioaddr, SIOREG_LDSEL, logdev[i]);
+
+ val = superio_inb(sioaddr, SIOREG_ACT);
+ if (!(val & 0x01)) {
+ printk(KERN_INFO DRVNAME ": Logical device 0x%02x "
+ "not activated\n", logdev[i]);
+ continue;
+ }
+
+ val = superio_inb(sioaddr, SIOREG_MAP);
+ if (val & 0x01) {
+ printk(KERN_WARNING DRVNAME ": Logical device 0x%02x "
+ "is memory-mapped, can't use\n", logdev[i]);
+ continue;
+ }
+
+ val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
+ | superio_inb(sioaddr, SIOREG_IOBASE + 1);
+ if (!val) {
+ printk(KERN_INFO DRVNAME ": I/O base address not set "
+ "for logical device 0x%02x\n", logdev[i]);
+ continue;
+ }
+ address[i] = val;
+ }
+
+exit:
+ superio_exit(sioaddr);
+ return err;
+}
+
+static int __init pc87427_init(void)
+{
+ int err;
+ unsigned short address[2];
+
+ if (pc87427_find(0x2e, address)
+ && pc87427_find(0x4e, address))
+ return -ENODEV;
+
+ /* For now the driver only handles fans so we only care about the
+ first address. */
+ if (!address[0])
+ return -ENODEV;
+
+ err = platform_driver_register(&pc87427_driver);
+ if (err)
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ err = pc87427_device_add(address[0]);
+ if (err)
+ goto exit_driver;
+
+ return 0;
+
+exit_driver:
+ platform_driver_unregister(&pc87427_driver);
+exit:
+ return err;
+}
+
+static void __exit pc87427_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&pc87427_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("PC87427 hardware monitoring driver");
+MODULE_LICENSE("GPL");
+
+module_init(pc87427_init);
+module_exit(pc87427_exit);
the Winbond W83627EHF Super-I/O chip
Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
Copyright (C) 2006 Yuan Mu (Winbond),
- Rudolf Marek <r.marek@sh.cvut.cz>
+ Rudolf Marek <r.marek@assembler.cz>
David Hubbard <david.c.hubbard@gmail.com>
Shamelessly ripped from the w83627hf driver
monitoring
Copyright (C) 2004, 2005 Winbond Electronics Corp.
Chunhao Huang <DZShen@Winbond.com.tw>,
- Rudolf Marek <r.marek@sh.cvut.cz>
+ Rudolf Marek <r.marek@assembler.cz>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
--- /dev/null
+/*
+ w83793.c - Linux kernel driver for hardware monitoring
+ Copyright (C) 2006 Winbond Electronics Corp.
+ Yuan Mu
+ Rudolf Marek <r.marek@assembler.cz>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation - version 2.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301 USA.
+*/
+
+/*
+ Supports following chips:
+
+ Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ w83793 10 12 8 6 0x7b 0x5ca3 yes no
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(w83793);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+ "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+static int reset;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
+
+/*
+ Address 0x00, 0x0d, 0x0e, 0x0f in all three banks are reserved
+ as ID, Bank Select registers
+*/
+#define W83793_REG_BANKSEL 0x00
+#define W83793_REG_VENDORID 0x0d
+#define W83793_REG_CHIPID 0x0e
+#define W83793_REG_DEVICEID 0x0f
+
+#define W83793_REG_CONFIG 0x40
+#define W83793_REG_MFC 0x58
+#define W83793_REG_FANIN_CTRL 0x5c
+#define W83793_REG_FANIN_SEL 0x5d
+#define W83793_REG_I2C_ADDR 0x0b
+#define W83793_REG_I2C_SUBADDR 0x0c
+#define W83793_REG_VID_INA 0x05
+#define W83793_REG_VID_INB 0x06
+#define W83793_REG_VID_LATCHA 0x07
+#define W83793_REG_VID_LATCHB 0x08
+#define W83793_REG_VID_CTRL 0x59
+
+static u16 W83793_REG_TEMP_MODE[2] = { 0x5e, 0x5f };
+
+#define TEMP_READ 0
+#define TEMP_CRIT 1
+#define TEMP_CRIT_HYST 2
+#define TEMP_WARN 3
+#define TEMP_WARN_HYST 4
+/* only crit and crit_hyst affect real-time alarm status
+ current crit crit_hyst warn warn_hyst */
+static u16 W83793_REG_TEMP[][5] = {
+ {0x1c, 0x78, 0x79, 0x7a, 0x7b},
+ {0x1d, 0x7c, 0x7d, 0x7e, 0x7f},
+ {0x1e, 0x80, 0x81, 0x82, 0x83},
+ {0x1f, 0x84, 0x85, 0x86, 0x87},
+ {0x20, 0x88, 0x89, 0x8a, 0x8b},
+ {0x21, 0x8c, 0x8d, 0x8e, 0x8f},
+};
+
+#define W83793_REG_TEMP_LOW_BITS 0x22
+
+#define W83793_REG_BEEP(index) (0x53 + (index))
+#define W83793_REG_ALARM(index) (0x4b + (index))
+
+#define W83793_REG_CLR_CHASSIS 0x4a /* SMI MASK4 */
+#define W83793_REG_IRQ_CTRL 0x50
+#define W83793_REG_OVT_CTRL 0x51
+#define W83793_REG_OVT_BEEP 0x52
+
+#define IN_READ 0
+#define IN_MAX 1
+#define IN_LOW 2
+static const u16 W83793_REG_IN[][3] = {
+ /* Current, High, Low */
+ {0x10, 0x60, 0x61}, /* Vcore A */
+ {0x11, 0x62, 0x63}, /* Vcore B */
+ {0x12, 0x64, 0x65}, /* Vtt */
+ {0x14, 0x6a, 0x6b}, /* VSEN1 */
+ {0x15, 0x6c, 0x6d}, /* VSEN2 */
+ {0x16, 0x6e, 0x6f}, /* +3VSEN */
+ {0x17, 0x70, 0x71}, /* +12VSEN */
+ {0x18, 0x72, 0x73}, /* 5VDD */
+ {0x19, 0x74, 0x75}, /* 5VSB */
+ {0x1a, 0x76, 0x77}, /* VBAT */
+};
+
+/* Low Bits of Vcore A/B Vtt Read/High/Low */
+static const u16 W83793_REG_IN_LOW_BITS[] = { 0x1b, 0x68, 0x69 };
+static u8 scale_in[] = { 2, 2, 2, 16, 16, 16, 8, 24, 24, 16 };
+
+#define W83793_REG_FAN(index) (0x23 + 2 * (index)) /* High byte */
+#define W83793_REG_FAN_MIN(index) (0x90 + 2 * (index)) /* High byte */
+
+#define W83793_REG_PWM_DEFAULT 0xb2
+#define W83793_REG_PWM_ENABLE 0x207
+#define W83793_REG_PWM_UPTIME 0xc3 /* Unit in 0.1 second */
+#define W83793_REG_PWM_DOWNTIME 0xc4 /* Unit in 0.1 second */
+#define W83793_REG_TEMP_CRITICAL 0xc5
+
+#define PWM_DUTY 0
+#define PWM_START 1
+#define PWM_NONSTOP 2
+#define W83793_REG_PWM(index, nr) (((nr) == 0 ? 0xb3 : \
+ (nr) == 1 ? 0x220 : 0x218) + (index))
+
+/* bit field, fan1 is bit0, fan2 is bit1 ... */
+#define W83793_REG_TEMP_FAN_MAP(index) (0x201 + (index))
+#define W83793_REG_TEMP_TOL(index) (0x208 + (index))
+#define W83793_REG_TEMP_CRUISE(index) (0x210 + (index))
+#define W83793_REG_PWM_STOP_TIME(index) (0x228 + (index))
+#define W83793_REG_SF2_TEMP(index, nr) (0x230 + ((index) << 4) + (nr))
+#define W83793_REG_SF2_PWM(index, nr) (0x238 + ((index) << 4) + (nr))
+
+static inline unsigned long FAN_FROM_REG(u16 val)
+{
+ if ((val >= 0xfff) || (val == 0))
+ return 0;
+ return (1350000UL / val);
+}
+
+static inline u16 FAN_TO_REG(long rpm)
+{
+ if (rpm <= 0)
+ return 0x0fff;
+ return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
+}
+
+static inline unsigned long TIME_FROM_REG(u8 reg)
+{
+ return (reg * 100);
+}
+
+static inline u8 TIME_TO_REG(unsigned long val)
+{
+ return SENSORS_LIMIT((val + 50) / 100, 0, 0xff);
+}
+
+static inline long TEMP_FROM_REG(s8 reg)
+{
+ return (reg * 1000);
+}
+
+static inline s8 TEMP_TO_REG(long val, s8 min, s8 max)
+{
+ return SENSORS_LIMIT((val + (val < 0 ? -500 : 500)) / 1000, min, max);
+}
+
+struct w83793_data {
+ struct i2c_client client;
+ struct i2c_client *lm75[2];
+ struct class_device *class_dev;
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ unsigned long last_nonvolatile; /* In jiffies, last time we update the
+ nonvolatile registers */
+
+ u8 bank;
+ u8 vrm;
+ u8 vid[2];
+ u8 in[10][3]; /* Register value, read/high/low */
+ u8 in_low_bits[3]; /* Additional resolution for VCore A/B Vtt */
+
+ u16 has_fan; /* Only fan1- fan5 has own pins */
+ u16 fan[12]; /* Register value combine */
+ u16 fan_min[12]; /* Register value combine */
+
+ s8 temp[6][5]; /* current, crit, crit_hyst,warn, warn_hyst */
+ u8 temp_low_bits; /* Additional resolution TD1-TD4 */
+ u8 temp_mode[2]; /* byte 0: Temp D1-D4 mode each has 2 bits
+ byte 1: Temp R1,R2 mode, each has 1 bit */
+ u8 temp_critical; /* If reached all fan will be at full speed */
+ u8 temp_fan_map[6]; /* Temp controls which pwm fan, bit field */
+
+ u8 has_pwm;
+ u8 pwm_enable; /* Register value, each Temp has 1 bit */
+ u8 pwm_uptime; /* Register value */
+ u8 pwm_downtime; /* Register value */
+ u8 pwm_default; /* All fan default pwm, next poweron valid */
+ u8 pwm[8][3]; /* Register value */
+ u8 pwm_stop_time[8];
+ u8 temp_cruise[6];
+
+ u8 alarms[5]; /* realtime status registers */
+ u8 beeps[5];
+ u8 beep_enable;
+ u8 tolerance[3]; /* Temp tolerance(Smart Fan I/II) */
+ u8 sf2_pwm[6][7]; /* Smart FanII: Fan duty cycle */
+ u8 sf2_temp[6][7]; /* Smart FanII: Temp level point */
+};
+
+static u8 w83793_read_value(struct i2c_client *client, u16 reg);
+static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value);
+static int w83793_attach_adapter(struct i2c_adapter *adapter);
+static int w83793_detect(struct i2c_adapter *adapter, int address, int kind);
+static int w83793_detach_client(struct i2c_client *client);
+static void w83793_init_client(struct i2c_client *client);
+static void w83793_update_nonvolatile(struct device *dev);
+static struct w83793_data *w83793_update_device(struct device *dev);
+
+static struct i2c_driver w83793_driver = {
+ .driver = {
+ .name = "w83793",
+ },
+ .attach_adapter = w83793_attach_adapter,
+ .detach_client = w83793_detach_client,
+};
+
+static ssize_t
+show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%d\n", data->vrm);
+}
+
+static ssize_t
+show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83793_data *data = w83793_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+
+ return sprintf(buf, "%d\n", vid_from_reg(data->vid[index], data->vrm));
+}
+
+static ssize_t
+store_vrm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+
+ data->vrm = simple_strtoul(buf, NULL, 10);
+ return count;
+}
+
+#define ALARM_STATUS 0
+#define BEEP_ENABLE 1
+static ssize_t
+show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83793_data *data = w83793_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index >> 3;
+ int bit = sensor_attr->index & 0x07;
+ u8 val;
+
+ if (ALARM_STATUS == nr) {
+ val = (data->alarms[index] >> (bit)) & 1;
+ } else { /* BEEP_ENABLE */
+ val = (data->beeps[index] >> (bit)) & 1;
+ }
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index >> 3;
+ int shift = sensor_attr->index & 0x07;
+ u8 beep_bit = 1 << shift;
+ u8 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->beeps[index] = w83793_read_value(client, W83793_REG_BEEP(index));
+ data->beeps[index] &= ~beep_bit;
+ data->beeps[index] |= val << shift;
+ w83793_write_value(client, W83793_REG_BEEP(index), data->beeps[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t
+show_beep_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83793_data *data = w83793_update_device(dev);
+ return sprintf(buf, "%u\n", (data->beep_enable >> 1) & 0x01);
+}
+
+static ssize_t
+store_beep_enable(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u8 val = simple_strtoul(buf, NULL, 10);
+
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP)
+ & 0xfd;
+ data->beep_enable |= val << 1;
+ w83793_write_value(client, W83793_REG_OVT_BEEP, data->beep_enable);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+/* Write any value to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u8 val;
+
+ mutex_lock(&data->update_lock);
+ val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
+ val |= 0x80;
+ w83793_write_value(client, W83793_REG_CLR_CHASSIS, val);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define FAN_INPUT 0
+#define FAN_MIN 1
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+ u16 val;
+
+ if (FAN_INPUT == nr) {
+ val = data->fan[index] & 0x0fff;
+ } else {
+ val = data->fan_min[index] & 0x0fff;
+ }
+
+ return sprintf(buf, "%lu\n", FAN_FROM_REG(val));
+}
+
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u16 val = FAN_TO_REG(simple_strtoul(buf, NULL, 10));
+
+ mutex_lock(&data->update_lock);
+ data->fan_min[index] = val;
+ w83793_write_value(client, W83793_REG_FAN_MIN(index),
+ (val >> 8) & 0xff);
+ w83793_write_value(client, W83793_REG_FAN_MIN(index) + 1, val & 0xff);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+#define PWM_DUTY 0
+#define PWM_START 1
+#define PWM_NONSTOP 2
+#define PWM_STOP_TIME 3
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ struct w83793_data *data = w83793_update_device(dev);
+ u16 val;
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+
+ if (PWM_STOP_TIME == nr)
+ val = TIME_FROM_REG(data->pwm_stop_time[index]);
+ else
+ val = (data->pwm[index][nr] & 0x3f) << 2;
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u8 val;
+
+ mutex_lock(&data->update_lock);
+ if (PWM_STOP_TIME == nr) {
+ val = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
+ data->pwm_stop_time[index] = val;
+ w83793_write_value(client, W83793_REG_PWM_STOP_TIME(index),
+ val);
+ } else {
+ val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff)
+ >> 2;
+ data->pwm[index][nr] =
+ w83793_read_value(client, W83793_REG_PWM(index, nr)) & 0xc0;
+ data->pwm[index][nr] |= val;
+ w83793_write_value(client, W83793_REG_PWM(index, nr),
+ data->pwm[index][nr]);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+ long temp = TEMP_FROM_REG(data->temp[index][nr]);
+
+ if (TEMP_READ == nr && index < 4) { /* Only TD1-TD4 have low bits */
+ int low = ((data->temp_low_bits >> (index * 2)) & 0x03) * 250;
+ temp += temp > 0 ? low : -low;
+ }
+ return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ long tmp = simple_strtol(buf, NULL, 10);
+
+ mutex_lock(&data->update_lock);
+ data->temp[index][nr] = TEMP_TO_REG(tmp, -128, 127);
+ w83793_write_value(client, W83793_REG_TEMP[index][nr],
+ data->temp[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/*
+ TD1-TD4
+ each has 4 mode:(2 bits)
+ 0: Stop monitor
+ 1: Use internal temp sensor(default)
+ 2: Use sensor in AMD CPU and get result by AMDSI
+ 3: Use sensor in Intel CPU and get result by PECI
+
+ TR1-TR2
+ each has 2 mode:(1 bit)
+ 0: Disable temp sensor monitor
+ 1: To enable temp sensors monitor
+*/
+
+/* 0 disable, 5 AMDSI, 6 PECI */
+static u8 TO_TEMP_MODE[] = { 0, 0, 5, 6 };
+
+static ssize_t
+show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83793_data *data = w83793_update_device(dev);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ u8 mask = (index < 4) ? 0x03 : 0x01;
+ u8 shift = (index < 4) ? (2 * index) : (index - 4);
+ u8 tmp;
+ index = (index < 4) ? 0 : 1;
+
+ tmp = (data->temp_mode[index] >> shift) & mask;
+
+ /* for the internal sensor, found out if diode or thermistor */
+ if (tmp == 1) {
+ tmp = index == 0 ? 3 : 4;
+ } else {
+ tmp = TO_TEMP_MODE[tmp];
+ }
+
+ return sprintf(buf, "%d\n", tmp);
+}
+
+static ssize_t
+store_temp_mode(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int index = sensor_attr->index;
+ u8 mask = (index < 4) ? 0x03 : 0x01;
+ u8 shift = (index < 4) ? (2 * index) : (index - 4);
+ u8 val = simple_strtoul(buf, NULL, 10);
+
+ /* transform the sysfs interface values into table above */
+ if ((val == 5 || val == 6) && (index < 4)) {
+ val -= 3;
+ } else if ((val == 3 && index < 4)
+ || (val == 4 && index >= 4)
+ || val == 0) {
+ /* transform diode or thermistor into internal enable */
+ val = !!val;
+ } else {
+ return -EINVAL;
+ }
+
+ index = (index < 4) ? 0 : 1;
+ mutex_lock(&data->update_lock);
+ data->temp_mode[index] =
+ w83793_read_value(client, W83793_REG_TEMP_MODE[index]);
+ data->temp_mode[index] &= ~(mask << shift);
+ data->temp_mode[index] |= val << shift;
+ w83793_write_value(client, W83793_REG_TEMP_MODE[index],
+ data->temp_mode[index]);
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+#define SETUP_PWM_DEFAULT 0
+#define SETUP_PWM_UPTIME 1 /* Unit in 0.1s */
+#define SETUP_PWM_DOWNTIME 2 /* Unit in 0.1s */
+#define SETUP_TEMP_CRITICAL 3
+static ssize_t
+show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct w83793_data *data = w83793_update_device(dev);
+ u32 val = 0;
+
+ if (SETUP_PWM_DEFAULT == nr) {
+ val = (data->pwm_default & 0x3f) << 2;
+ } else if (SETUP_PWM_UPTIME == nr) {
+ val = TIME_FROM_REG(data->pwm_uptime);
+ } else if (SETUP_PWM_DOWNTIME == nr) {
+ val = TIME_FROM_REG(data->pwm_downtime);
+ } else if (SETUP_TEMP_CRITICAL == nr) {
+ val = TEMP_FROM_REG(data->temp_critical & 0x7f);
+ }
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_setup(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+
+ mutex_lock(&data->update_lock);
+ if (SETUP_PWM_DEFAULT == nr) {
+ data->pwm_default =
+ w83793_read_value(client, W83793_REG_PWM_DEFAULT) & 0xc0;
+ data->pwm_default |= SENSORS_LIMIT(simple_strtoul(buf, NULL,
+ 10),
+ 0, 0xff) >> 2;
+ w83793_write_value(client, W83793_REG_PWM_DEFAULT,
+ data->pwm_default);
+ } else if (SETUP_PWM_UPTIME == nr) {
+ data->pwm_uptime = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
+ data->pwm_uptime += data->pwm_uptime == 0 ? 1 : 0;
+ w83793_write_value(client, W83793_REG_PWM_UPTIME,
+ data->pwm_uptime);
+ } else if (SETUP_PWM_DOWNTIME == nr) {
+ data->pwm_downtime = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
+ data->pwm_downtime += data->pwm_downtime == 0 ? 1 : 0;
+ w83793_write_value(client, W83793_REG_PWM_DOWNTIME,
+ data->pwm_downtime);
+ } else { /* SETUP_TEMP_CRITICAL */
+ data->temp_critical =
+ w83793_read_value(client, W83793_REG_TEMP_CRITICAL) & 0x80;
+ data->temp_critical |= TEMP_TO_REG(simple_strtol(buf, NULL, 10),
+ 0, 0x7f);
+ w83793_write_value(client, W83793_REG_TEMP_CRITICAL,
+ data->temp_critical);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/*
+ Temp SmartFan control
+ TEMP_FAN_MAP
+ Temp channel control which pwm fan, bitfield, bit 0 indicate pwm1...
+ It's possible two or more temp channels control the same fan, w83793
+ always prefers to pick the most critical request and applies it to
+ the related Fan.
+ It's possible one fan is not in any mapping of 6 temp channels, this
+ means the fan is manual mode
+
+ TEMP_PWM_ENABLE
+ Each temp channel has its own SmartFan mode, and temp channel
+ control fans that are set by TEMP_FAN_MAP
+ 0: SmartFanII mode
+ 1: Thermal Cruise Mode
+
+ TEMP_CRUISE
+ Target temperature in thermal cruise mode, w83793 will try to turn
+ fan speed to keep the temperature of target device around this
+ temperature.
+
+ TEMP_TOLERANCE
+ If Temp higher or lower than target with this tolerance, w83793
+ will take actions to speed up or slow down the fan to keep the
+ temperature within the tolerance range.
+*/
+
+#define TEMP_FAN_MAP 0
+#define TEMP_PWM_ENABLE 1
+#define TEMP_CRUISE 2
+#define TEMP_TOLERANCE 3
+static ssize_t
+show_sf_ctrl(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+ u32 val;
+
+ if (TEMP_FAN_MAP == nr) {
+ val = data->temp_fan_map[index];
+ } else if (TEMP_PWM_ENABLE == nr) {
+ /* +2 to transfrom into 2 and 3 to conform with sysfs intf */
+ val = ((data->pwm_enable >> index) & 0x01) + 2;
+ } else if (TEMP_CRUISE == nr) {
+ val = TEMP_FROM_REG(data->temp_cruise[index] & 0x7f);
+ } else { /* TEMP_TOLERANCE */
+ val = data->tolerance[index >> 1] >> ((index & 0x01) ? 4 : 0);
+ val = TEMP_FROM_REG(val & 0x0f);
+ }
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_ctrl(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ mutex_lock(&data->update_lock);
+ if (TEMP_FAN_MAP == nr) {
+ val = simple_strtoul(buf, NULL, 10) & 0xff;
+ w83793_write_value(client, W83793_REG_TEMP_FAN_MAP(index), val);
+ data->temp_fan_map[index] = val;
+ } else if (TEMP_PWM_ENABLE == nr) {
+ val = simple_strtoul(buf, NULL, 10);
+ if (2 == val || 3 == val) {
+ data->pwm_enable =
+ w83793_read_value(client, W83793_REG_PWM_ENABLE);
+ if (val - 2)
+ data->pwm_enable |= 1 << index;
+ else
+ data->pwm_enable &= ~(1 << index);
+ w83793_write_value(client, W83793_REG_PWM_ENABLE,
+ data->pwm_enable);
+ } else {
+ mutex_unlock(&data->update_lock);
+ return -EINVAL;
+ }
+ } else if (TEMP_CRUISE == nr) {
+ data->temp_cruise[index] =
+ w83793_read_value(client, W83793_REG_TEMP_CRUISE(index));
+ val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x7f);
+ data->temp_cruise[index] &= 0x80;
+ data->temp_cruise[index] |= val;
+
+ w83793_write_value(client, W83793_REG_TEMP_CRUISE(index),
+ data->temp_cruise[index]);
+ } else { /* TEMP_TOLERANCE */
+ int i = index >> 1;
+ u8 shift = (index & 0x01) ? 4 : 0;
+ data->tolerance[i] =
+ w83793_read_value(client, W83793_REG_TEMP_TOL(i));
+
+ val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x0f);
+ data->tolerance[i] &= ~(0x0f << shift);
+ data->tolerance[i] |= val << shift;
+ w83793_write_value(client, W83793_REG_TEMP_TOL(i),
+ data->tolerance[i]);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_sf2_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+
+ return sprintf(buf, "%d\n", (data->sf2_pwm[index][nr] & 0x3f) << 2);
+}
+
+static ssize_t
+store_sf2_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u8 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff) >> 2;
+
+ mutex_lock(&data->update_lock);
+ data->sf2_pwm[index][nr] =
+ w83793_read_value(client, W83793_REG_SF2_PWM(index, nr)) & 0xc0;
+ data->sf2_pwm[index][nr] |= val;
+ w83793_write_value(client, W83793_REG_SF2_PWM(index, nr),
+ data->sf2_pwm[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+show_sf2_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+
+ return sprintf(buf, "%ld\n",
+ TEMP_FROM_REG(data->sf2_temp[index][nr] & 0x7f));
+}
+
+static ssize_t
+store_sf2_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ u8 val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x7f);
+
+ mutex_lock(&data->update_lock);
+ data->sf2_temp[index][nr] =
+ w83793_read_value(client, W83793_REG_SF2_TEMP(index, nr)) & 0x80;
+ data->sf2_temp[index][nr] |= val;
+ w83793_write_value(client, W83793_REG_SF2_TEMP(index, nr),
+ data->sf2_temp[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+/* only Vcore A/B and Vtt have additional 2 bits precision */
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct w83793_data *data = w83793_update_device(dev);
+ u16 val = data->in[index][nr];
+
+ if (index < 3) {
+ val <<= 2;
+ val += (data->in_low_bits[nr] >> (index * 2)) & 0x3;
+ }
+ return sprintf(buf, "%d\n", val * scale_in[index]);
+}
+
+static ssize_t
+store_in(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sensor_attr =
+ to_sensor_dev_attr_2(attr);
+ int nr = sensor_attr->nr;
+ int index = sensor_attr->index;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val =
+ (simple_strtoul(buf, NULL, 10) +
+ scale_in[index] / 2) / scale_in[index];
+ mutex_lock(&data->update_lock);
+ if (index > 2) {
+ val = SENSORS_LIMIT(val, 0, 255);
+ } else {
+ val = SENSORS_LIMIT(val, 0, 0x3FF);
+ data->in_low_bits[nr] =
+ w83793_read_value(client, W83793_REG_IN_LOW_BITS[nr]);
+ data->in_low_bits[nr] &= ~(0x03 << (2 * index));
+ data->in_low_bits[nr] |= (val & 0x03) << (2 * index);
+ w83793_write_value(client, W83793_REG_IN_LOW_BITS[nr],
+ data->in_low_bits[nr]);
+ val >>= 2;
+ }
+ data->in[index][nr] = val;
+ w83793_write_value(client, W83793_REG_IN[index][nr],
+ data->in[index][nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+#define NOT_USED -1
+
+#define SENSOR_ATTR_IN(index) \
+ SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \
+ IN_READ, index), \
+ SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in, \
+ store_in, IN_MAX, index), \
+ SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in, \
+ store_in, IN_LOW, index), \
+ SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep, \
+ NULL, ALARM_STATUS, index + ((index > 2) ? 1 : 0)), \
+ SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, \
+ index + ((index > 2) ? 1 : 0))
+
+#define SENSOR_ATTR_FAN(index) \
+ SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep, \
+ NULL, ALARM_STATUS, index + 17), \
+ SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, index + 17), \
+ SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \
+ NULL, FAN_INPUT, index - 1), \
+ SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO, \
+ show_fan, store_fan_min, FAN_MIN, index - 1)
+
+#define SENSOR_ATTR_PWM(index) \
+ SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm, \
+ store_pwm, PWM_DUTY, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_NONSTOP, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_START, index - 1), \
+ SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO, \
+ show_pwm, store_pwm, PWM_STOP_TIME, index - 1)
+
+#define SENSOR_ATTR_TEMP(index) \
+ SENSOR_ATTR_2(temp##index##_type, S_IRUGO | S_IWUSR, \
+ show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
+ SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \
+ NULL, TEMP_READ, index - 1), \
+ SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp, \
+ store_temp, TEMP_CRIT, index - 1), \
+ SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp, store_temp, TEMP_CRIT_HYST, index - 1), \
+ SENSOR_ATTR_2(temp##index##_warn, S_IRUGO | S_IWUSR, show_temp, \
+ store_temp, TEMP_WARN, index - 1), \
+ SENSOR_ATTR_2(temp##index##_warn_hyst, S_IRUGO | S_IWUSR, \
+ show_temp, store_temp, TEMP_WARN_HYST, index - 1), \
+ SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \
+ show_alarm_beep, NULL, ALARM_STATUS, index + 11), \
+ SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
+ show_alarm_beep, store_beep, BEEP_ENABLE, index + 11), \
+ SENSOR_ATTR_2(temp##index##_auto_channels_pwm, \
+ S_IRUGO | S_IWUSR, show_sf_ctrl, store_sf_ctrl, \
+ TEMP_FAN_MAP, index - 1), \
+ SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \
+ show_sf_ctrl, store_sf_ctrl, TEMP_PWM_ENABLE, \
+ index - 1), \
+ SENSOR_ATTR_2(thermal_cruise##index, S_IRUGO | S_IWUSR, \
+ show_sf_ctrl, store_sf_ctrl, TEMP_CRUISE, index - 1), \
+ SENSOR_ATTR_2(tolerance##index, S_IRUGO | S_IWUSR, show_sf_ctrl,\
+ store_sf_ctrl, TEMP_TOLERANCE, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 0, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 1, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 2, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 3, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 4, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 5, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
+ show_sf2_pwm, store_sf2_pwm, 6, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 0, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 1, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 2, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 3, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 4, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 5, index - 1), \
+ SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
+ show_sf2_temp, store_sf2_temp, 6, index - 1)
+
+static struct sensor_device_attribute_2 w83793_sensor_attr_2[] = {
+ SENSOR_ATTR_IN(0),
+ SENSOR_ATTR_IN(1),
+ SENSOR_ATTR_IN(2),
+ SENSOR_ATTR_IN(3),
+ SENSOR_ATTR_IN(4),
+ SENSOR_ATTR_IN(5),
+ SENSOR_ATTR_IN(6),
+ SENSOR_ATTR_IN(7),
+ SENSOR_ATTR_IN(8),
+ SENSOR_ATTR_IN(9),
+ SENSOR_ATTR_TEMP(1),
+ SENSOR_ATTR_TEMP(2),
+ SENSOR_ATTR_TEMP(3),
+ SENSOR_ATTR_TEMP(4),
+ SENSOR_ATTR_TEMP(5),
+ SENSOR_ATTR_TEMP(6),
+ SENSOR_ATTR_FAN(1),
+ SENSOR_ATTR_FAN(2),
+ SENSOR_ATTR_FAN(3),
+ SENSOR_ATTR_FAN(4),
+ SENSOR_ATTR_FAN(5),
+ SENSOR_ATTR_PWM(1),
+ SENSOR_ATTR_PWM(2),
+ SENSOR_ATTR_PWM(3),
+};
+
+/* Fan6-Fan12 */
+static struct sensor_device_attribute_2 w83793_left_fan[] = {
+ SENSOR_ATTR_FAN(6),
+ SENSOR_ATTR_FAN(7),
+ SENSOR_ATTR_FAN(8),
+ SENSOR_ATTR_FAN(9),
+ SENSOR_ATTR_FAN(10),
+ SENSOR_ATTR_FAN(11),
+ SENSOR_ATTR_FAN(12),
+};
+
+/* Pwm4-Pwm8 */
+static struct sensor_device_attribute_2 w83793_left_pwm[] = {
+ SENSOR_ATTR_PWM(4),
+ SENSOR_ATTR_PWM(5),
+ SENSOR_ATTR_PWM(6),
+ SENSOR_ATTR_PWM(7),
+ SENSOR_ATTR_PWM(8),
+};
+
+static struct sensor_device_attribute_2 sda_single_files[] = {
+ SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
+ SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
+ SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
+ NOT_USED, NOT_USED),
+ SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_chassis_clear, ALARM_STATUS, 30),
+ SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
+ store_beep_enable, NOT_USED, NOT_USED),
+ SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
+ SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
+ SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
+ SENSOR_ATTR_2(temp_critical, S_IWUSR | S_IRUGO, show_sf_setup,
+ store_sf_setup, SETUP_TEMP_CRITICAL, NOT_USED),
+};
+
+static void w83793_init_client(struct i2c_client *client)
+{
+ if (reset) {
+ w83793_write_value(client, W83793_REG_CONFIG, 0x80);
+ }
+
+ /* Start monitoring */
+ w83793_write_value(client, W83793_REG_CONFIG,
+ w83793_read_value(client, W83793_REG_CONFIG) | 0x01);
+
+}
+
+static int w83793_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, w83793_detect);
+}
+
+static int w83793_detach_client(struct i2c_client *client)
+{
+ struct w83793_data *data = i2c_get_clientdata(client);
+ struct device *dev = &client->dev;
+ int err, i;
+
+ /* main client */
+ if (data) {
+ hwmon_device_unregister(data->class_dev);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
+ device_remove_file(dev,
+ &w83793_sensor_attr_2[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+ device_remove_file(dev, &sda_single_files[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
+ device_remove_file(dev, &w83793_left_fan[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
+ device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+ }
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ /* main client */
+ if (data)
+ kfree(data);
+ /* subclient */
+ else
+ kfree(client);
+
+ return 0;
+}
+
+static int
+w83793_create_subclient(struct i2c_adapter *adapter,
+ struct i2c_client *client, int addr,
+ struct i2c_client **sub_cli)
+{
+ int err = 0;
+ struct i2c_client *sub_client;
+
+ (*sub_cli) = sub_client =
+ kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (!(sub_client)) {
+ return -ENOMEM;
+ }
+ sub_client->addr = 0x48 + addr;
+ i2c_set_clientdata(sub_client, NULL);
+ sub_client->adapter = adapter;
+ sub_client->driver = &w83793_driver;
+ strlcpy(sub_client->name, "w83793 subclient", I2C_NAME_SIZE);
+ if ((err = i2c_attach_client(sub_client))) {
+ dev_err(&client->dev, "subclient registration "
+ "at address 0x%x failed\n", sub_client->addr);
+ kfree(sub_client);
+ }
+ return err;
+}
+
+static int
+w83793_detect_subclients(struct i2c_adapter *adapter, int address,
+ int kind, struct i2c_client *client)
+{
+ int i, id, err;
+ u8 tmp;
+ struct w83793_data *data = i2c_get_clientdata(client);
+
+ id = i2c_adapter_id(adapter);
+ if (force_subclients[0] == id && force_subclients[1] == address) {
+ for (i = 2; i <= 3; i++) {
+ if (force_subclients[i] < 0x48
+ || force_subclients[i] > 0x4f) {
+ dev_err(&client->dev,
+ "invalid subclient "
+ "address %d; must be 0x48-0x4f\n",
+ force_subclients[i]);
+ err = -EINVAL;
+ goto ERROR_SC_0;
+ }
+ }
+ w83793_write_value(client, W83793_REG_I2C_SUBADDR,
+ (force_subclients[2] & 0x07) |
+ ((force_subclients[3] & 0x07) << 4));
+ }
+
+ tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR);
+ if (!(tmp & 0x08)) {
+ err =
+ w83793_create_subclient(adapter, client, tmp & 0x7,
+ &data->lm75[0]);
+ if (err < 0)
+ goto ERROR_SC_0;
+ }
+ if (!(tmp & 0x80)) {
+ if ((data->lm75[0] != NULL)
+ && ((tmp & 0x7) == ((tmp >> 4) & 0x7))) {
+ dev_err(&client->dev,
+ "duplicate addresses 0x%x, "
+ "use force_subclients\n", data->lm75[0]->addr);
+ err = -ENODEV;
+ goto ERROR_SC_1;
+ }
+ err = w83793_create_subclient(adapter, client,
+ (tmp >> 4) & 0x7, &data->lm75[1]);
+ if (err < 0)
+ goto ERROR_SC_1;
+ }
+
+ return 0;
+
+ /* Undo inits in case of errors */
+
+ERROR_SC_1:
+ if (data->lm75[0] != NULL) {
+ i2c_detach_client(data->lm75[0]);
+ kfree(data->lm75[0]);
+ }
+ERROR_SC_0:
+ return err;
+}
+
+static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ int i;
+ u8 tmp, val;
+ struct i2c_client *client;
+ struct device *dev;
+ struct w83793_data *data;
+ int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
+ int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
+ int err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ goto exit;
+ }
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet.
+ But it allows us to access w83793_{read,write}_value. */
+
+ if (!(data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ client = &data->client;
+ dev = &client->dev;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &w83793_driver;
+
+ data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
+
+ /* Now, we do the remaining detection. */
+ if (kind < 0) {
+ tmp = data->bank & 0x80 ? 0x5c : 0xa3;
+ /* Check Winbond vendor ID */
+ if (tmp != i2c_smbus_read_byte_data(client,
+ W83793_REG_VENDORID)) {
+ pr_debug("w83793: Detection failed at check "
+ "vendor id\n");
+ err = -ENODEV;
+ goto free_mem;
+ }
+
+ /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
+ should match */
+ if ((data->bank & 0x07) == 0
+ && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
+ (address << 1)) {
+ pr_debug("w83793: Detection failed at check "
+ "i2c addr\n");
+ err = -ENODEV;
+ goto free_mem;
+ }
+
+ }
+
+ /* We have either had a force parameter, or we have already detected the
+ Winbond. Determine the chip type now */
+
+ if (kind <= 0) {
+ if (0x7b == w83793_read_value(client, W83793_REG_CHIPID)) {
+ kind = w83793;
+ } else {
+ if (kind == 0)
+ dev_warn(&adapter->dev, "w83793: Ignoring "
+ "'force' parameter for unknown chip "
+ "at address 0x%02x\n", address);
+ err = -ENODEV;
+ goto free_mem;
+ }
+ }
+
+ /* Fill in the remaining client fields and put into the global list */
+ strlcpy(client->name, "w83793", I2C_NAME_SIZE);
+
+ mutex_init(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(client)))
+ goto free_mem;
+
+ if ((err = w83793_detect_subclients(adapter, address, kind, client)))
+ goto detach_client;
+
+ /* Initialize the chip */
+ w83793_init_client(client);
+
+ data->vrm = vid_which_vrm();
+ /*
+ Only fan 1-5 has their own input pins,
+ Pwm 1-3 has their own pins
+ */
+ data->has_fan = 0x1f;
+ data->has_pwm = 0x07;
+ tmp = w83793_read_value(client, W83793_REG_MFC);
+ val = w83793_read_value(client, W83793_REG_FANIN_CTRL);
+
+ /* check the function of pins 49-56 */
+ if (!(tmp & 0x80)) {
+ data->has_pwm |= 0x18; /* pwm 4,5 */
+ if (val & 0x01) { /* fan 6 */
+ data->has_fan |= 0x20;
+ data->has_pwm |= 0x20;
+ }
+ if (val & 0x02) { /* fan 7 */
+ data->has_fan |= 0x40;
+ data->has_pwm |= 0x40;
+ }
+ if (!(tmp & 0x40) && (val & 0x04)) { /* fan 8 */
+ data->has_fan |= 0x80;
+ data->has_pwm |= 0x80;
+ }
+ }
+
+ if (0x08 == (tmp & 0x0c)) {
+ if (val & 0x08) /* fan 9 */
+ data->has_fan |= 0x100;
+ if (val & 0x10) /* fan 10 */
+ data->has_fan |= 0x200;
+ }
+
+ if (0x20 == (tmp & 0x30)) {
+ if (val & 0x20) /* fan 11 */
+ data->has_fan |= 0x400;
+ if (val & 0x40) /* fan 12 */
+ data->has_fan |= 0x800;
+ }
+
+ if ((tmp & 0x01) && (val & 0x04)) { /* fan 8, second location */
+ data->has_fan |= 0x80;
+ data->has_pwm |= 0x80;
+ }
+
+ /* Register sysfs hooks */
+ for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
+ err = device_create_file(dev,
+ &w83793_sensor_attr_2[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
+ err = device_create_file(dev, &sda_single_files[i].dev_attr);
+ if (err)
+ goto exit_remove;
+
+ }
+
+ for (i = 5; i < 12; i++) {
+ int j;
+ if (!(data->has_fan & (1 << i)))
+ continue;
+ for (j = 0; j < files_fan; j++) {
+ err = device_create_file(dev,
+ &w83793_left_fan[(i - 5) * files_fan
+ + j].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
+
+ for (i = 3; i < 8; i++) {
+ int j;
+ if (!(data->has_pwm & (1 << i)))
+ continue;
+ for (j = 0; j < files_pwm; j++) {
+ err = device_create_file(dev,
+ &w83793_left_pwm[(i - 3) * files_pwm
+ + j].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+ }
+
+ data->class_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ goto exit_remove;
+ }
+
+ return 0;
+
+ /* Unregister sysfs hooks */
+
+exit_remove:
+ for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
+ device_remove_file(dev, &w83793_sensor_attr_2[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+ device_remove_file(dev, &sda_single_files[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
+ device_remove_file(dev, &w83793_left_fan[i].dev_attr);
+
+ for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
+ device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+
+ if (data->lm75[0] != NULL) {
+ i2c_detach_client(data->lm75[0]);
+ kfree(data->lm75[0]);
+ }
+ if (data->lm75[1] != NULL) {
+ i2c_detach_client(data->lm75[1]);
+ kfree(data->lm75[1]);
+ }
+detach_client:
+ i2c_detach_client(client);
+free_mem:
+ kfree(data);
+exit:
+ return err;
+}
+
+static void w83793_update_nonvolatile(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ int i, j;
+ /*
+ They are somewhat "stable" registers, and to update them everytime
+ takes so much time, it's just not worthy. Update them in a long
+ interval to avoid exception.
+ */
+ if (!(time_after(jiffies, data->last_nonvolatile + HZ * 300)
+ || !data->valid))
+ return;
+ /* update voltage limits */
+ for (i = 1; i < 3; i++) {
+ for (j = 0; j < ARRAY_SIZE(data->in); j++) {
+ data->in[j][i] =
+ w83793_read_value(client, W83793_REG_IN[j][i]);
+ }
+ data->in_low_bits[i] =
+ w83793_read_value(client, W83793_REG_IN_LOW_BITS[i]);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
+ /* Update the Fan measured value and limits */
+ if (!(data->has_fan & (1 << i))) {
+ continue;
+ }
+ data->fan_min[i] =
+ w83793_read_value(client, W83793_REG_FAN_MIN(i)) << 8;
+ data->fan_min[i] |=
+ w83793_read_value(client, W83793_REG_FAN_MIN(i) + 1);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->temp_fan_map); i++) {
+ data->temp_fan_map[i] =
+ w83793_read_value(client, W83793_REG_TEMP_FAN_MAP(i));
+ for (j = 1; j < 5; j++) {
+ data->temp[i][j] =
+ w83793_read_value(client, W83793_REG_TEMP[i][j]);
+ }
+ data->temp_cruise[i] =
+ w83793_read_value(client, W83793_REG_TEMP_CRUISE(i));
+ for (j = 0; j < 7; j++) {
+ data->sf2_pwm[i][j] =
+ w83793_read_value(client, W83793_REG_SF2_PWM(i, j));
+ data->sf2_temp[i][j] =
+ w83793_read_value(client,
+ W83793_REG_SF2_TEMP(i, j));
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->temp_mode); i++)
+ data->temp_mode[i] =
+ w83793_read_value(client, W83793_REG_TEMP_MODE[i]);
+
+ for (i = 0; i < ARRAY_SIZE(data->tolerance); i++) {
+ data->tolerance[i] =
+ w83793_read_value(client, W83793_REG_TEMP_TOL(i));
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
+ if (!(data->has_pwm & (1 << i)))
+ continue;
+ data->pwm[i][PWM_NONSTOP] =
+ w83793_read_value(client, W83793_REG_PWM(i, PWM_NONSTOP));
+ data->pwm[i][PWM_START] =
+ w83793_read_value(client, W83793_REG_PWM(i, PWM_START));
+ data->pwm_stop_time[i] =
+ w83793_read_value(client, W83793_REG_PWM_STOP_TIME(i));
+ }
+
+ data->pwm_default = w83793_read_value(client, W83793_REG_PWM_DEFAULT);
+ data->pwm_enable = w83793_read_value(client, W83793_REG_PWM_ENABLE);
+ data->pwm_uptime = w83793_read_value(client, W83793_REG_PWM_UPTIME);
+ data->pwm_downtime = w83793_read_value(client, W83793_REG_PWM_DOWNTIME);
+ data->temp_critical =
+ w83793_read_value(client, W83793_REG_TEMP_CRITICAL);
+ data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP);
+
+ for (i = 0; i < ARRAY_SIZE(data->beeps); i++) {
+ data->beeps[i] = w83793_read_value(client, W83793_REG_BEEP(i));
+ }
+
+ data->last_nonvolatile = jiffies;
+}
+
+static struct w83793_data *w83793_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (!(time_after(jiffies, data->last_updated + HZ * 2)
+ || !data->valid))
+ goto END;
+
+ /* Update the voltages measured value and limits */
+ for (i = 0; i < ARRAY_SIZE(data->in); i++)
+ data->in[i][IN_READ] =
+ w83793_read_value(client, W83793_REG_IN[i][IN_READ]);
+
+ data->in_low_bits[IN_READ] =
+ w83793_read_value(client, W83793_REG_IN_LOW_BITS[IN_READ]);
+
+ for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+ if (!(data->has_fan & (1 << i))) {
+ continue;
+ }
+ data->fan[i] =
+ w83793_read_value(client, W83793_REG_FAN(i)) << 8;
+ data->fan[i] |=
+ w83793_read_value(client, W83793_REG_FAN(i) + 1);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++)
+ data->temp[i][TEMP_READ] =
+ w83793_read_value(client, W83793_REG_TEMP[i][TEMP_READ]);
+
+ data->temp_low_bits =
+ w83793_read_value(client, W83793_REG_TEMP_LOW_BITS);
+
+ for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
+ if (data->has_pwm & (1 << i))
+ data->pwm[i][PWM_DUTY] =
+ w83793_read_value(client,
+ W83793_REG_PWM(i, PWM_DUTY));
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
+ data->alarms[i] =
+ w83793_read_value(client, W83793_REG_ALARM(i));
+ data->vid[0] = w83793_read_value(client, W83793_REG_VID_INA);
+ data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB);
+ w83793_update_nonvolatile(dev);
+ data->last_updated = jiffies;
+ data->valid = 1;
+
+END:
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+/* Ignore the possibility that somebody change bank outside the driver
+ Must be called with data->update_lock held, except during initialization */
+static u8 w83793_read_value(struct i2c_client *client, u16 reg)
+{
+ struct w83793_data *data = i2c_get_clientdata(client);
+ u8 res = 0xff;
+ u8 new_bank = reg >> 8;
+
+ new_bank |= data->bank & 0xfc;
+ if (data->bank != new_bank) {
+ if (i2c_smbus_write_byte_data
+ (client, W83793_REG_BANKSEL, new_bank) >= 0)
+ data->bank = new_bank;
+ else {
+ dev_err(&client->dev,
+ "set bank to %d failed, fall back "
+ "to bank %d, read reg 0x%x error\n",
+ new_bank, data->bank, reg);
+ res = 0x0; /* read 0x0 from the chip */
+ goto END;
+ }
+ }
+ res = i2c_smbus_read_byte_data(client, reg & 0xff);
+END:
+ return res;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value)
+{
+ struct w83793_data *data = i2c_get_clientdata(client);
+ int res;
+ u8 new_bank = reg >> 8;
+
+ new_bank |= data->bank & 0xfc;
+ if (data->bank != new_bank) {
+ if ((res = i2c_smbus_write_byte_data
+ (client, W83793_REG_BANKSEL, new_bank)) >= 0)
+ data->bank = new_bank;
+ else {
+ dev_err(&client->dev,
+ "set bank to %d failed, fall back "
+ "to bank %d, write reg 0x%x error\n",
+ new_bank, data->bank, reg);
+ goto END;
+ }
+ }
+
+ res = i2c_smbus_write_byte_data(client, reg & 0xff, value);
+END:
+ return res;
+}
+
+static int __init sensors_w83793_init(void)
+{
+ return i2c_add_driver(&w83793_driver);
+}
+
+static void __exit sensors_w83793_exit(void)
+{
+ i2c_del_driver(&w83793_driver);
+}
+
+MODULE_AUTHOR("Yuan Mu");
+MODULE_DESCRIPTION("w83793 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83793_init);
+module_exit(sensors_w83793_exit);
This support is also available as a module. If so, the module
will be called i2c-algo-pca.
-config I2C_ALGOITE
- tristate "ITE I2C Algorithm"
- depends on MIPS_ITE8172 && I2C
- help
- This supports the use of the ITE8172 I2C interface found on some MIPS
- systems. Say Y if you have one of these. You should also say Y for
- the ITE I2C peripheral driver support below.
-
- This support is also available as a module. If so, the module
- will be called i2c-algo-ite.
-
config I2C_ALGO8XX
tristate "MPC8xx CPM I2C interface"
depends on 8xx && I2C
obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o
-obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o
obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o
ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
return i2c_add_adapter(adap);
}
-
-
-int i2c_bit_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_bit_add_bus);
-EXPORT_SYMBOL(i2c_bit_del_bus);
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm");
+++ /dev/null
-/*
- -------------------------------------------------------------------------
- i2c-algo-ite.c i2c driver algorithms for ITE adapters
-
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2000 MontaVista Software Inc.
-
- ---------------------------------------------------------------------------
- This file was highly leveraged from i2c-algo-pcf.c, which was created
- by Simon G. Vogl and Hans Berglund:
-
-
- Copyright (C) 1995-1997 Simon G. Vogl
- 1998-2000 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
- Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
- <mbailey@littlefeet-inc.com> */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include "i2c-algo-ite.h"
-
-#define PM_DSR IT8172_PCI_IO_BASE + IT_PM_DSR
-#define PM_IBSR IT8172_PCI_IO_BASE + IT_PM_DSR + 0x04
-#define GPIO_CCR IT8172_PCI_IO_BASE + IT_GPCCR
-
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
-#define DEF_TIMEOUT 16
-
-
-/* module parameters:
- */
-static int i2c_debug;
-static int iic_test; /* see if the line-setting functions work */
-
-/* --- setting states on the bus with the right timing: --------------- */
-
-#define get_clock(adap) adap->getclock(adap->data)
-#define iic_outw(adap, reg, val) adap->setiic(adap->data, reg, val)
-#define iic_inw(adap, reg) adap->getiic(adap->data, reg)
-
-
-/* --- other auxiliary functions -------------------------------------- */
-
-static void iic_start(struct i2c_algo_iic_data *adap)
-{
- iic_outw(adap,ITE_I2CHCR,ITE_CMD);
-}
-
-static void iic_stop(struct i2c_algo_iic_data *adap)
-{
- iic_outw(adap,ITE_I2CHCR,0);
- iic_outw(adap,ITE_I2CHSR,ITE_I2CHSR_TDI);
-}
-
-static void iic_reset(struct i2c_algo_iic_data *adap)
-{
- iic_outw(adap, PM_IBSR, iic_inw(adap, PM_IBSR) | 0x80);
-}
-
-
-static int wait_for_bb(struct i2c_algo_iic_data *adap)
-{
- int timeout = DEF_TIMEOUT;
- short status;
-
- status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
- while (timeout-- && (status & ITE_I2CHSR_HB)) {
- udelay(1000); /* How much is this? */
- status = iic_inw(adap, ITE_I2CHSR);
- }
-#endif
- if (timeout<=0) {
- printk(KERN_ERR "Timeout, host is busy\n");
- iic_reset(adap);
- }
- return(timeout<=0);
-}
-
-/* After we issue a transaction on the IIC bus, this function
- * is called. It puts this process to sleep until we get an interrupt from
- * from the controller telling us that the transaction we requested in complete.
- */
-static int wait_for_pin(struct i2c_algo_iic_data *adap, short *status) {
-
- int timeout = DEF_TIMEOUT;
-
- timeout = wait_for_bb(adap);
- if (timeout) {
- DEB2(printk("Timeout waiting for host not busy\n");)
- return -EIO;
- }
- timeout = DEF_TIMEOUT;
-
- *status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
- while (timeout-- && !(*status & ITE_I2CHSR_TDI)) {
- adap->waitforpin();
- *status = iic_inw(adap, ITE_I2CHSR);
- }
-#endif
- if (timeout <= 0)
- return(-1);
- else
- return(0);
-}
-
-static int wait_for_fe(struct i2c_algo_iic_data *adap, short *status)
-{
- int timeout = DEF_TIMEOUT;
-
- *status = iic_inw(adap, ITE_I2CFSR);
-#ifndef STUB_I2C
- while (timeout-- && (*status & ITE_I2CFSR_FE)) {
- udelay(1000);
- iic_inw(adap, ITE_I2CFSR);
- }
-#endif
- if (timeout <= 0)
- return(-1);
- else
- return(0);
-}
-
-static int iic_init (struct i2c_algo_iic_data *adap)
-{
- short i;
-
- /* Clear bit 7 to set I2C to normal operation mode */
- i=iic_inw(adap, PM_DSR)& 0xff7f;
- iic_outw(adap, PM_DSR, i);
-
- /* set IT_GPCCR port C bit 2&3 as function 2 */
- i = iic_inw(adap, GPIO_CCR) & 0xfc0f;
- iic_outw(adap,GPIO_CCR,i);
-
- /* Clear slave address/sub-address */
- iic_outw(adap,ITE_I2CSAR, 0);
- iic_outw(adap,ITE_I2CSSAR, 0);
-
- /* Set clock counter register */
- iic_outw(adap,ITE_I2CCKCNT, get_clock(adap));
-
- /* Set START/reSTART/STOP time registers */
- iic_outw(adap,ITE_I2CSHDR, 0x0a);
- iic_outw(adap,ITE_I2CRSUR, 0x0a);
- iic_outw(adap,ITE_I2CPSUR, 0x0a);
-
- /* Enable interrupts on completing the current transaction */
- iic_outw(adap,ITE_I2CHCR, ITE_I2CHCR_IE | ITE_I2CHCR_HCE);
-
- /* Clear transfer count */
- iic_outw(adap,ITE_I2CFBCR, 0x0);
-
- DEB2(printk("iic_init: Initialized IIC on ITE 0x%x\n",
- iic_inw(adap, ITE_I2CHSR)));
- return 0;
-}
-
-
-/*
- * Sanity check for the adapter hardware - check the reaction of
- * the bus lines only if it seems to be idle.
- */
-static int test_bus(struct i2c_algo_iic_data *adap, char *name) {
-#if 0
- int scl,sda;
- sda=getsda(adap);
- if (adap->getscl==NULL) {
- printk("test_bus: Warning: Adapter can't read from clock line - skipping test.\n");
- return 0;
- }
- scl=getscl(adap);
- printk("test_bus: Adapter: %s scl: %d sda: %d -- testing...\n",
- name,getscl(adap),getsda(adap));
- if (!scl || !sda ) {
- printk("test_bus: %s seems to be busy.\n",adap->name);
- goto bailout;
- }
- sdalo(adap);
- printk("test_bus:1 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 != getsda(adap) ) {
- printk("test_bus: %s SDA stuck high!\n",name);
- sdahi(adap);
- goto bailout;
- }
- if ( 0 == getscl(adap) ) {
- printk("test_bus: %s SCL unexpected low while pulling SDA low!\n",
- name);
- goto bailout;
- }
- sdahi(adap);
- printk("test_bus:2 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 == getsda(adap) ) {
- printk("test_bus: %s SDA stuck low!\n",name);
- sdahi(adap);
- goto bailout;
- }
- if ( 0 == getscl(adap) ) {
- printk("test_bus: %s SCL unexpected low while SDA high!\n",
- adap->name);
- goto bailout;
- }
- scllo(adap);
- printk("test_bus:3 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 != getscl(adap) ) {
-
- sclhi(adap);
- goto bailout;
- }
- if ( 0 == getsda(adap) ) {
- printk("test_bus: %s SDA unexpected low while pulling SCL low!\n",
- name);
- goto bailout;
- }
- sclhi(adap);
- printk("test_bus:4 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 == getscl(adap) ) {
- printk("test_bus: %s SCL stuck low!\n",name);
- sclhi(adap);
- goto bailout;
- }
- if ( 0 == getsda(adap) ) {
- printk("test_bus: %s SDA unexpected low while SCL high!\n",
- name);
- goto bailout;
- }
- printk("test_bus: %s passed test.\n",name);
- return 0;
-bailout:
- sdahi(adap);
- sclhi(adap);
- return -ENODEV;
-#endif
- return (0);
-}
-
-/* ----- Utility functions
- */
-
-
-/* Verify the device we want to talk to on the IIC bus really exists. */
-static inline int try_address(struct i2c_algo_iic_data *adap,
- unsigned int addr, int retries)
-{
- int i, ret = -1;
- short status;
-
- for (i=0;i<retries;i++) {
- iic_outw(adap, ITE_I2CSAR, addr);
- iic_start(adap);
- if (wait_for_pin(adap, &status) == 0) {
- if ((status & ITE_I2CHSR_DNE) == 0) {
- iic_stop(adap);
- iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
- ret=1;
- break; /* success! */
- }
- }
- iic_stop(adap);
- udelay(adap->udelay);
- }
- DEB2(if (i) printk("try_address: needed %d retries for 0x%x\n",i,
- addr));
- return ret;
-}
-
-
-static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf,
- int count)
-{
- struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
- int wrcount=0, timeout;
- short status;
- int loops, remainder, i, j;
- union {
- char byte[2];
- unsigned short word;
- } tmp;
-
- iic_outw(adap, ITE_I2CSSAR, (unsigned short)buf[wrcount++]);
- count--;
- if (count == 0)
- return -EIO;
-
- loops = count / 32; /* 32-byte FIFO */
- remainder = count % 32;
-
- if(loops) {
- for(i=0; i<loops; i++) {
-
- iic_outw(adap, ITE_I2CFBCR, 32);
- for(j=0; j<32/2; j++) {
- tmp.byte[1] = buf[wrcount++];
- tmp.byte[0] = buf[wrcount++];
- iic_outw(adap, ITE_I2CFDR, tmp.word);
- }
-
- /* status FIFO overrun */
- iic_inw(adap, ITE_I2CFSR);
- iic_inw(adap, ITE_I2CFBCR);
-
- iic_outw(adap, ITE_I2CHCR, ITE_WRITE); /* Issue WRITE command */
-
- /* Wait for transmission to complete */
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
- }
- }
- if(remainder) {
- iic_outw(adap, ITE_I2CFBCR, remainder);
- for(i=0; i<remainder/2; i++) {
- tmp.byte[1] = buf[wrcount++];
- tmp.byte[0] = buf[wrcount++];
- iic_outw(adap, ITE_I2CFDR, tmp.word);
- }
-
- /* status FIFO overrun */
- iic_inw(adap, ITE_I2CFSR);
- iic_inw(adap, ITE_I2CFBCR);
-
- iic_outw(adap, ITE_I2CHCR, ITE_WRITE); /* Issue WRITE command */
-
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
-#ifndef STUB_I2C
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
-#endif
- }
- iic_stop(adap);
- return wrcount;
-}
-
-
-static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count,
- int sread)
-{
- int rdcount=0, i, timeout;
- short status;
- struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
- int loops, remainder, j;
- union {
- char byte[2];
- unsigned short word;
- } tmp;
-
- loops = count / 32; /* 32-byte FIFO */
- remainder = count % 32;
-
- if(loops) {
- for(i=0; i<loops; i++) {
- iic_outw(adap, ITE_I2CFBCR, 32);
- if (sread)
- iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
- else
- iic_outw(adap, ITE_I2CHCR, ITE_READ); /* Issue READ command */
-
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s read timeout.\n", i2c_adap->name);
- return (-1);
- }
-#ifndef STUB_I2C
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
- return (-1);
- }
-#endif
-
- timeout = wait_for_fe(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name);
- return (-1);
- }
-
- for(j=0; j<32/2; j++) {
- tmp.word = iic_inw(adap, ITE_I2CFDR);
- buf[rdcount++] = tmp.byte[1];
- buf[rdcount++] = tmp.byte[0];
- }
-
- /* status FIFO underrun */
- iic_inw(adap, ITE_I2CFSR);
-
- }
- }
-
-
- if(remainder) {
- remainder=(remainder+1)/2 * 2;
- iic_outw(adap, ITE_I2CFBCR, remainder);
- if (sread)
- iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
- else
- iic_outw(adap, ITE_I2CHCR, ITE_READ); /* Issue READ command */
-
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s read timeout.\n", i2c_adap->name);
- return (-1);
- }
-#ifndef STUB_I2C
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
- return (-1);
- }
-#endif
- timeout = wait_for_fe(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name);
- return (-1);
- }
-
- for(i=0; i<(remainder+1)/2; i++) {
- tmp.word = iic_inw(adap, ITE_I2CFDR);
- buf[rdcount++] = tmp.byte[1];
- buf[rdcount++] = tmp.byte[0];
- }
-
- /* status FIFO underrun */
- iic_inw(adap, ITE_I2CFSR);
-
- }
-
- iic_stop(adap);
- return rdcount;
-}
-
-
-/* This function implements combined transactions. Combined
- * transactions consist of combinations of reading and writing blocks of data.
- * Each transfer (i.e. a read or a write) is separated by a repeated start
- * condition.
- */
-#if 0
-static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
-{
- int i;
- struct i2c_msg *pmsg;
- int ret;
-
- DEB2(printk("Beginning combined transaction\n"));
-
- for(i=0; i<(num-1); i++) {
- pmsg = &msgs[i];
- if(pmsg->flags & I2C_M_RD) {
- DEB2(printk(" This one is a read\n"));
- ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
- }
- else if(!(pmsg->flags & I2C_M_RD)) {
- DEB2(printk("This one is a write\n"));
- ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
- }
- }
- /* Last read or write segment needs to be terminated with a stop */
- pmsg = &msgs[i];
-
- if(pmsg->flags & I2C_M_RD) {
- DEB2(printk("Doing the last read\n"));
- ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
- }
- else if(!(pmsg->flags & I2C_M_RD)) {
- DEB2(printk("Doing the last write\n"));
- ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
- }
-
- return ret;
-}
-#endif
-
-
-/* Whenever we initiate a transaction, the first byte clocked
- * onto the bus after the start condition is the address (7 bit) of the
- * device we want to talk to. This function manipulates the address specified
- * so that it makes sense to the hardware when written to the IIC peripheral.
- *
- * Note: 10 bit addresses are not supported in this driver, although they are
- * supported by the hardware. This functionality needs to be implemented.
- */
-static inline int iic_doAddress(struct i2c_algo_iic_data *adap,
- struct i2c_msg *msg, int retries)
-{
- unsigned short flags = msg->flags;
- unsigned int addr;
- int ret;
-
-/* Ten bit addresses not supported right now */
- if ( (flags & I2C_M_TEN) ) {
-#if 0
- addr = 0xf0 | (( msg->addr >> 7) & 0x03);
- DEB2(printk("addr0: %d\n",addr));
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk("iic_doAddress: died at extended address code.\n");
- return -EREMOTEIO;
- }
- iic_outw(adap,msg->addr & 0x7f);
- if (ret != 1) {
- printk("iic_doAddress: died at 2nd address code.\n");
- return -EREMOTEIO;
- }
- if ( flags & I2C_M_RD ) {
- i2c_repstart(adap);
- addr |= 0x01;
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk("iic_doAddress: died at extended address code.\n");
- return -EREMOTEIO;
- }
- }
-#endif
- } else {
-
- addr = ( msg->addr << 1 );
-
-#if 0
- if (flags & I2C_M_RD )
- addr |= 1;
- if (flags & I2C_M_REV_DIR_ADDR )
- addr ^= 1;
-#endif
-
- if (iic_inw(adap, ITE_I2CSAR) != addr) {
- iic_outw(adap, ITE_I2CSAR, addr);
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk("iic_doAddress: died at address code.\n");
- return -EREMOTEIO;
- }
- }
-
- }
-
- return 0;
-}
-
-
-/* Description: Prepares the controller for a transaction (clearing status
- * registers, data buffers, etc), and then calls either iic_readbytes or
- * iic_sendbytes to do the actual transaction.
- *
- * still to be done: Before we issue a transaction, we should
- * verify that the bus is not busy or in some unknown state.
- */
-static int iic_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg *msgs,
- int num)
-{
- struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
- struct i2c_msg *pmsg;
- int i = 0;
- int ret, timeout;
-
- pmsg = &msgs[i];
-
- if(!pmsg->len) {
- DEB2(printk("iic_xfer: read/write length is 0\n");)
- return -EIO;
- }
- if(!(pmsg->flags & I2C_M_RD) && (!(pmsg->len)%2) ) {
- DEB2(printk("iic_xfer: write buffer length is not odd\n");)
- return -EIO;
- }
-
- /* Wait for any pending transfers to complete */
- timeout = wait_for_bb(adap);
- if (timeout) {
- DEB2(printk("iic_xfer: Timeout waiting for host not busy\n");)
- return -EIO;
- }
-
- /* Flush FIFO */
- iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
- /* Load address */
- ret = iic_doAddress(adap, pmsg, i2c_adap->retries);
- if (ret)
- return -EIO;
-
-#if 0
- /* Combined transaction (read and write) */
- if(num > 1) {
- DEB2(printk("iic_xfer: Call combined transaction\n"));
- ret = iic_combined_transaction(i2c_adap, msgs, num);
- }
-#endif
-
- DEB3(printk("iic_xfer: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
- i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
-
- if(pmsg->flags & I2C_M_RD) /* Read */
- ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, 0);
- else { /* Write */
- udelay(1000);
- ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len);
- }
-
- if (ret != pmsg->len)
- DEB3(printk("iic_xfer: error or fail on read/write %d bytes.\n",ret));
- else
- DEB3(printk("iic_xfer: read/write %d bytes.\n",ret));
-
- return ret;
-}
-
-
-/* Implements device specific ioctls. Higher level ioctls can
- * be found in i2c-core.c and are typical of any i2c controller (specifying
- * slave address, timeouts, etc). These ioctls take advantage of any hardware
- * features built into the controller for which this algorithm-adapter set
- * was written. These ioctls allow you to take control of the data and clock
- * lines and set the either high or low,
- * similar to a GPIO pin.
- */
-static int algo_control(struct i2c_adapter *adapter,
- unsigned int cmd, unsigned long arg)
-{
-
- struct i2c_algo_iic_data *adap = adapter->algo_data;
- struct i2c_iic_msg s_msg;
- char *buf;
- int ret;
-
- if (cmd == I2C_SREAD) {
- if(copy_from_user(&s_msg, (struct i2c_iic_msg *)arg,
- sizeof(struct i2c_iic_msg)))
- return -EFAULT;
- buf = kmalloc(s_msg.len, GFP_KERNEL);
- if (buf== NULL)
- return -ENOMEM;
-
- /* Flush FIFO */
- iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
- /* Load address */
- iic_outw(adap, ITE_I2CSAR,s_msg.addr<<1);
- iic_outw(adap, ITE_I2CSSAR,s_msg.waddr & 0xff);
-
- ret = iic_readbytes(adapter, buf, s_msg.len, 1);
- if (ret>=0) {
- if(copy_to_user( s_msg.buf, buf, s_msg.len) )
- ret = -EFAULT;
- }
- kfree(buf);
- }
- return 0;
-}
-
-
-static u32 iic_func(struct i2c_adapter *adap)
-{
- return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
- I2C_FUNC_PROTOCOL_MANGLING;
-}
-
-/* -----exported algorithm data: ------------------------------------- */
-
-static struct i2c_algorithm iic_algo = {
- .master_xfer = iic_xfer,
- .algo_control = algo_control, /* ioctl */
- .functionality = iic_func,
-};
-
-
-/*
- * registering functions to load algorithms at runtime
- */
-int i2c_iic_add_bus(struct i2c_adapter *adap)
-{
- struct i2c_algo_iic_data *iic_adap = adap->algo_data;
-
- if (iic_test) {
- int ret = test_bus(iic_adap, adap->name);
- if (ret<0)
- return -ENODEV;
- }
-
- DEB2(printk("i2c-algo-ite: hw routines for %s registered.\n",
- adap->name));
-
- /* register new adapter to i2c module... */
- adap->algo = &iic_algo;
-
- adap->timeout = 100; /* default values, should */
- adap->retries = 3; /* be replaced by defines */
- adap->flags = 0;
-
- iic_init(iic_adap);
- return i2c_add_adapter(adap);
-}
-
-
-int i2c_iic_del_bus(struct i2c_adapter *adap)
-{
- int res;
- if ((res = i2c_del_adapter(adap)) < 0)
- return res;
- DEB2(printk("i2c-algo-ite: adapter unregistered: %s\n",adap->name));
-
- return 0;
-}
-
-
-int __init i2c_algo_iic_init (void)
-{
- printk(KERN_INFO "ITE iic (i2c) algorithm module\n");
- return 0;
-}
-
-
-void i2c_algo_iic_exit(void)
-{
- return;
-}
-
-
-EXPORT_SYMBOL(i2c_iic_add_bus);
-EXPORT_SYMBOL(i2c_iic_del_bus);
-
-/* The MODULE_* macros resolve to nothing if MODULES is not defined
- * when this file is compiled.
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("ITE iic algorithm");
-MODULE_LICENSE("GPL");
-
-module_param(iic_test, bool, 0);
-module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
-
-MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available");
-MODULE_PARM_DESC(i2c_debug,
- "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
-
-
-/* This function resolves to init_module (the function invoked when a module
- * is loaded via insmod) when this file is compiled with MODULES defined.
- * Otherwise (i.e. if you want this driver statically linked to the kernel),
- * a pointer to this function is stored in a table and called
- * during the initialization of the kernel (in do_basic_setup in /init/main.c)
- *
- * All this functionality is complements of the macros defined in linux/init.h
- */
-module_init(i2c_algo_iic_init);
-
-
-/* If MODULES is defined when this file is compiled, then this function will
- * resolved to cleanup_module.
- */
-module_exit(i2c_algo_iic_exit);
+++ /dev/null
-/*
- --------------------------------------------------------------------
- i2c-ite.h: Global defines for the I2C controller on board the
- ITE MIPS processor.
- --------------------------------------------------------------------
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2001 MontaVista Software Inc.
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-
-#ifndef I2C_ITE_H
-#define I2C_ITE_H 1
-
-#include <asm/it8172/it8172.h>
-
-/* I2C Registers */
-#define ITE_I2CHCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
-#define ITE_I2CHSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
-#define ITE_I2CSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
-#define ITE_I2CSSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
-#define ITE_I2CCKCNT IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
-#define ITE_I2CSHDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
-#define ITE_I2CRSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
-#define ITE_I2CPSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
-
-#define ITE_I2CFDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
-#define ITE_I2CFBCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
-#define ITE_I2CFCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
-#define ITE_I2CFSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
-
-
-/* Host Control Register ITE_I2CHCR */
-#define ITE_I2CHCR_HCE 0x01 /* Enable I2C Host Controller */
-#define ITE_I2CHCR_IE 0x02 /* Enable the interrupt after completing
- the current transaction */
-#define ITE_I2CHCR_CP_W 0x00 /* bit2-4 000 - Write */
-#define ITE_I2CHCR_CP_R 0x08 /* 010 - Current address read */
-#define ITE_I2CHCR_CP_S 0x10 /* 100 - Sequential read */
-#define ITE_I2CHCR_ST 0x20 /* Initiates the I2C host controller to execute
- the command and send the data programmed in
- all required registers to I2C bus */
-#define ITE_CMD ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
-#define ITE_WRITE ITE_CMD | ITE_I2CHCR_CP_W
-#define ITE_READ ITE_CMD | ITE_I2CHCR_CP_R
-#define ITE_SREAD ITE_CMD | ITE_I2CHCR_CP_S
-
-/* Host Status Register ITE_I2CHSR */
-#define ITE_I2CHSR_DB 0x01 /* Device is busy, receives NACK response except
- in the first and last bytes */
-#define ITE_I2CHSR_DNE 0x02 /* Target address on I2C bus does not exist */
-#define ITE_I2CHSR_TDI 0x04 /* R/W Transaction on I2C bus was completed */
-#define ITE_I2CHSR_HB 0x08 /* Host controller is processing transactions */
-#define ITE_I2CHSR_FER 0x10 /* Error occurs in the FIFO */
-
-/* Slave Address Register ITE_I2CSAR */
-#define ITE_I2CSAR_SA_MASK 0xfe /* Target I2C device address */
-#define ITE_I2CSAR_ASO 0x0100 /* Output 1/0 to I2CAS port when the
- next slave address is addressed */
-
-/* Slave Sub-address Register ITE_I2CSSAR */
-#define ITE_I2CSSAR_SUBA_MASK 0xff /* Target I2C device sub-address */
-
-/* Clock Counter Register ITE_I2CCKCNT */
-#define ITE_I2CCKCNT_STOP 0x00 /* stop I2C clock */
-#define ITE_I2CCKCNT_HPCC_MASK 0x7f /* SCL high period counter */
-#define ITE_I2CCKCNT_LPCC_MASK 0x7f00 /* SCL low period counter */
-
-/* START Hold Time Register ITE_I2CSHDR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CSHDR_FM 0x0a /* START condition at fast mode */
-#define ITE_I2CSHDR_SM 0x47 /* START contition at standard mode */
-
-/* (Repeated) START Setup Time Register ITE_I2CRSUR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CRSUR_FM 0x0a /* repeated START condition at fast mode */
-#define ITE_I2CRSUR_SM 0x50 /* repeated START condition at standard mode */
-
-/* STOP setup Time Register ITE_I2CPSUR */
-
-/* FIFO Data Register ITE_I2CFDR */
-#define ITE_I2CFDR_MASK 0xff
-
-/* FIFO Byte Count Register ITE_I2CFBCR */
-#define ITE_I2CFBCR_MASK 0x3f
-
-/* FIFO Control Register ITE_I2CFCR */
-#define ITE_I2CFCR_FLUSH 0x01 /* Flush FIFO and reset the FIFO point
- and I2CFSR */
-/* FIFO Status Register ITE_I2CFSR */
-#define ITE_I2CFSR_FO 0x01 /* FIFO is overrun when write */
-#define ITE_I2CFSR_FU 0x02 /* FIFO is underrun when read */
-#define ITE_I2CFSR_FF 0x04 /* FIFO is full when write */
-#define ITE_I2CFSR_FE 0x08 /* FIFO is empty when read */
-
-#endif /* I2C_ITE_H */
return rval;
}
-
-int i2c_pca_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_pca_add_bus);
-EXPORT_SYMBOL(i2c_pca_del_bus);
MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
MODULE_DESCRIPTION("I2C-Bus PCA9564 algorithm");
return rval;
}
-
-
-int i2c_pcf_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_pcf_add_bus);
-EXPORT_SYMBOL(i2c_pcf_del_bus);
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
MODULE_DESCRIPTION("I2C-Bus PCF8584 algorithm");
return i2c_add_adapter(adap);
}
-
-
-int i2c_sgi_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_sgi_add_bus);
-EXPORT_SYMBOL(i2c_sgi_del_bus);
MODULE_AUTHOR("Ladislav Michl <ladis@linux-mips.org>");
MODULE_DESCRIPTION("I2C-Bus SGI algorithm");
This driver can also be built as a module. If so, the module
will be called i2c-amd8111.
+config I2C_AT91
+ tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
+ depends on I2C && ARCH_AT91 && EXPERIMENTAL
+ help
+ This supports the use of the I2C interface on Atmel AT91
+ processors.
+
config I2C_AU1550
tristate "Au1550/Au1200 SMBus interface"
depends on I2C && (SOC_AU1550 || SOC_AU1200)
tristate
depends on I2C
-config I2C_ITE
- tristate "ITE I2C Adapter"
- depends on I2C && MIPS_ITE8172
- select I2C_ALGOITE
- help
- This supports the ITE8172 I2C peripheral found on some MIPS
- systems. Say Y if you have one of these. You should also say Y for
- the ITE I2C driver algorithm support above.
-
- This support is also available as a module. If so, the module
- will be called i2c-ite.
-
config I2C_IXP4XX
tristate "IXP4xx GPIO-Based I2C Interface"
depends on I2C && ARCH_IXP4XX
If you don't know what to do here, definitely say N.
+config I2C_VERSATILE
+ tristate "ARM Versatile/Realview I2C bus support"
+ depends on I2C && (ARCH_VERSATILE || ARCH_REALVIEW)
+ select I2C_ALGOBIT
+ help
+ Say yes if you want to support the I2C serial bus on ARMs Versatile
+ range of platforms.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-versatile.
+
config I2C_VIA
tristate "VIA 82C586B"
depends on I2C && PCI && EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called i2c-mv64xxx.
+config I2C_PNX
+ tristate "I2C bus support for Philips PNX targets"
+ depends on ARCH_PNX4008 && I2C
+ help
+ This driver supports the Philips IP3204 I2C IP block master and/or
+ slave controller
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-pnx.
+
+config I2C_PNX_EARLY
+ bool "Early initialization for I2C on PNXxxxx"
+ depends on I2C_PNX=y
+ help
+ Under certain circumstances one may need to make sure I2C on PNXxxxx
+ is initialized earlier than some other driver that depends on it
+ (for instance, that might be USB in case of PNX4008). With this
+ option turned on you can guarantee that.
+
endmenu
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
+obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_ISA) += i2c-isa.o
-obj-$(CONFIG_I2C_ITE) += i2c-ite.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
+obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_VIA) += i2c-via.o
obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
* i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
*
* Copyright (C) 2004 Patrick Mochel
- * 2005 Rudolf Marek <r.marek@sh.cvut.cz>
+ * 2005 Rudolf Marek <r.marek@assembler.cz>
*
* The 1563 southbridge is deceptively similar to the 1533, with a
* few notable exceptions. One of those happens to be the fact they
--- /dev/null
+/*
+ i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+
+ Copyright (C) 2004 Rick Bronson
+ Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
+
+ Borrowed heavily from original work by:
+ Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+*/
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/at91_twi.h>
+#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+
+#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
+
+
+static struct clk *twi_clk;
+static void __iomem *twi_base;
+
+#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
+
+
+/*
+ * Initialize the TWI hardware registers.
+ */
+static void __devinit at91_twi_hwinit(void)
+{
+ unsigned long cdiv, ckdiv;
+
+ at91_twi_write(AT91_TWI_IDR, 0xffffffff); /* Disable all interrupts */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); /* Reset peripheral */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
+
+ /* Calcuate clock dividers */
+ cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
+ cdiv = cdiv + 1; /* round up */
+ ckdiv = 0;
+ while (cdiv > 255) {
+ ckdiv++;
+ cdiv = cdiv >> 1;
+ }
+
+ if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
+ if (ckdiv > 5) {
+ printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
+ ckdiv = 5;
+ }
+ }
+
+ at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
+}
+
+/*
+ * Poll the i2c status register until the specified bit is set.
+ * Returns 0 if timed out (100 msec).
+ */
+static short at91_poll_status(unsigned long bit)
+{
+ int loop_cntr = 10000;
+
+ do {
+ udelay(10);
+ } while (!(at91_twi_read(AT91_TWI_SR) & bit) && (--loop_cntr > 0));
+
+ return (loop_cntr > 0);
+}
+
+static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+ /* Send Start */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START);
+
+ /* Read data */
+ while (length--) {
+ if (!length) /* need to send Stop before reading last byte */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP);
+ if (!at91_poll_status(AT91_TWI_RXRDY)) {
+ dev_dbg(&adap->dev, "RXRDY timeout\n");
+ return -ETIMEDOUT;
+ }
+ *buf++ = (at91_twi_read(AT91_TWI_RHR) & 0xff);
+ }
+
+ return 0;
+}
+
+static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+ /* Load first byte into transmitter */
+ at91_twi_write(AT91_TWI_THR, *buf++);
+
+ /* Send Start */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START);
+
+ do {
+ if (!at91_poll_status(AT91_TWI_TXRDY)) {
+ dev_dbg(&adap->dev, "TXRDY timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ length--; /* byte was transmitted */
+
+ if (length > 0) /* more data to send? */
+ at91_twi_write(AT91_TWI_THR, *buf++);
+ } while (length);
+
+ /* Send Stop */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP);
+
+ return 0;
+}
+
+/*
+ * Generic i2c master transfer entrypoint.
+ *
+ * Note: We do not use Atmel's feature of storing the "internal device address".
+ * Instead the "internal device address" has to be written using a seperate
+ * i2c message.
+ * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html
+ */
+static int at91_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
+{
+ int i, ret;
+
+ dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
+
+ for (i = 0; i < num; i++) {
+ dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i,
+ pmsg->flags & I2C_M_RD ? "read" : "writ",
+ pmsg->len, pmsg->len > 1 ? "s" : "",
+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
+
+ at91_twi_write(AT91_TWI_MMR, (pmsg->addr << 16)
+ | ((pmsg->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0));
+
+ if (pmsg->len && pmsg->buf) { /* sanity check */
+ if (pmsg->flags & I2C_M_RD)
+ ret = xfer_read(adap, pmsg->buf, pmsg->len);
+ else
+ ret = xfer_write(adap, pmsg->buf, pmsg->len);
+
+ if (ret)
+ return ret;
+
+ /* Wait until transfer is finished */
+ if (!at91_poll_status(AT91_TWI_TXCOMP)) {
+ dev_dbg(&adap->dev, "TXCOMP timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+ dev_dbg(&adap->dev, "transfer complete\n");
+ pmsg++; /* next message */
+ }
+ return i;
+}
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 at91_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm at91_algorithm = {
+ .master_xfer = at91_xfer,
+ .functionality = at91_func,
+};
+
+/*
+ * Main initialization routine.
+ */
+static int __devinit at91_i2c_probe(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter;
+ struct resource *res;
+ int rc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_i2c"))
+ return -EBUSY;
+
+ twi_base = ioremap(res->start, res->end - res->start + 1);
+ if (!twi_base) {
+ rc = -ENOMEM;
+ goto fail0;
+ }
+
+ twi_clk = clk_get(NULL, "twi_clk");
+ if (IS_ERR(twi_clk)) {
+ dev_err(&pdev->dev, "no clock defined\n");
+ rc = -ENODEV;
+ goto fail1;
+ }
+
+ adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (adapter == NULL) {
+ dev_err(&pdev->dev, "can't allocate inteface!\n");
+ rc = -ENOMEM;
+ goto fail2;
+ }
+ sprintf(adapter->name, "AT91");
+ adapter->algo = &at91_algorithm;
+ adapter->class = I2C_CLASS_HWMON;
+ adapter->dev.parent = &pdev->dev;
+
+ platform_set_drvdata(pdev, adapter);
+
+ clk_enable(twi_clk); /* enable peripheral clock */
+ at91_twi_hwinit(); /* initialize TWI controller */
+
+ rc = i2c_add_adapter(adapter);
+ if (rc) {
+ dev_err(&pdev->dev, "Adapter %s registration failed\n",
+ adapter->name);
+ goto fail3;
+ }
+
+ dev_info(&pdev->dev, "AT91 i2c bus driver.\n");
+ return 0;
+
+fail3:
+ platform_set_drvdata(pdev, NULL);
+ kfree(adapter);
+ clk_disable(twi_clk);
+fail2:
+ clk_put(twi_clk);
+fail1:
+ iounmap(twi_base);
+fail0:
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ return rc;
+}
+
+static int __devexit at91_i2c_remove(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+ struct resource *res;
+ int rc;
+
+ rc = i2c_del_adapter(adapter);
+ platform_set_drvdata(pdev, NULL);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iounmap(twi_base);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ clk_disable(twi_clk); /* disable peripheral clock */
+ clk_put(twi_clk);
+
+ return rc;
+}
+
+#ifdef CONFIG_PM
+
+/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */
+
+static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ clk_disable(twi_clk);
+ return 0;
+}
+
+static int at91_i2c_resume(struct platform_device *pdev)
+{
+ return clk_enable(twi_clk);
+}
+
+#else
+#define at91_i2c_suspend NULL
+#define at91_i2c_resume NULL
+#endif
+
+static struct platform_driver at91_i2c_driver = {
+ .probe = at91_i2c_probe,
+ .remove = __devexit_p(at91_i2c_remove),
+ .suspend = at91_i2c_suspend,
+ .resume = at91_i2c_resume,
+ .driver = {
+ .name = "at91_i2c",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init at91_i2c_init(void)
+{
+ return platform_driver_register(&at91_i2c_driver);
+}
+
+static void __exit at91_i2c_exit(void)
+{
+ platform_driver_unregister(&at91_i2c_driver);
+}
+
+module_init(at91_i2c_init);
+module_exit(at91_i2c_exit);
+
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
+MODULE_LICENSE("GPL");
static void i2c_pcfisa_exit(void)
{
- i2c_pcf_del_bus(&pcf_isa_ops);
+ i2c_del_adapter(&pcf_isa_ops);
if (irq > 0) {
disable_irq(irq);
static void __devexit hydra_remove(struct pci_dev *dev)
{
pdregw(hydra_bit_data.data, 0); /* clear SCLK_OE and SDAT_OE */
- i2c_bit_del_bus(&hydra_adap);
+ i2c_del_adapter(&hydra_adap);
iounmap(hydra_bit_data.data);
release_mem_region(pci_resource_start(dev, 0)+
offsetof(struct Hydra, CachePD), 4);
int err;
I801_dev = dev;
- if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_ESB_4))
+ switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_82801DB_3:
+ case PCI_DEVICE_ID_INTEL_82801EB_3:
+ case PCI_DEVICE_ID_INTEL_ESB_4:
+ case PCI_DEVICE_ID_INTEL_ICH6_16:
+ case PCI_DEVICE_ID_INTEL_ICH7_17:
+ case PCI_DEVICE_ID_INTEL_ESB2_17:
+ case PCI_DEVICE_ID_INTEL_ICH8_5:
+ case PCI_DEVICE_ID_INTEL_ICH9_6:
isich4 = 1;
- else
+ break;
+ default:
isich4 = 0;
+ }
err = pci_enable_device(dev);
if (err) {
return retval;
retval = i2c_bit_add_bus(&i810_ddc_adapter);
if (retval)
- i2c_bit_del_bus(&i810_i2c_adapter);
+ i2c_del_adapter(&i810_i2c_adapter);
return retval;
}
static void __devexit i810_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&i810_ddc_adapter);
- i2c_bit_del_bus(&i810_i2c_adapter);
+ i2c_del_adapter(&i810_ddc_adapter);
+ i2c_del_adapter(&i810_i2c_adapter);
iounmap(ioaddr);
}
dev->idx = ocp->def->index;
ocp_set_drvdata(ocp, dev);
+ if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs),
+ "ibm_iic")) {
+ ret = -EBUSY;
+ goto fail1;
+ }
+
if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n",
dev->idx);
iounmap(dev->vaddr);
fail2:
+ release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
+fail1:
ocp_set_drvdata(ocp, NULL);
kfree(dev);
return ret;
free_irq(dev->irq, dev);
}
iounmap(dev->vaddr);
+ release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
kfree(dev);
}
}
+++ /dev/null
-/*
- -------------------------------------------------------------------------
- i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system
- -------------------------------------------------------------------------
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2001 MontaVista Software Inc.
-
- ----------------------------------------------------------------------------
- This file was highly leveraged from i2c-elektor.c, which was created
- by Simon G. Vogl and Hans Berglund:
-
-
- Copyright (C) 1995-97 Simon G. Vogl
- 1998-99 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
- Frodo Looijaard <frodol@dds.nl> */
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include <linux/i2c-adap-ite.h>
-#include "../i2c-ite.h"
-
-#define DEFAULT_BASE 0x14014030
-#define ITE_IIC_IO_SIZE 0x40
-#define DEFAULT_IRQ 0
-#define DEFAULT_CLOCK 0x1b0e /* default 16MHz/(27+14) = 400KHz */
-#define DEFAULT_OWN 0x55
-
-static int base;
-static int irq;
-static int clock;
-static int own;
-
-static struct iic_ite gpi;
-static wait_queue_head_t iic_wait;
-static int iic_pending;
-static spinlock_t lock;
-
-/* ----- local functions ---------------------------------------------- */
-
-static void iic_ite_setiic(void *data, int ctl, short val)
-{
- unsigned long j = jiffies + 10;
-
- pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff);
-#ifdef DEBUG
- while (time_before(jiffies, j))
- schedule();
-#endif
- outw(val,ctl);
-}
-
-static short iic_ite_getiic(void *data, int ctl)
-{
- short val;
-
- val = inw(ctl);
- pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff);
- return (val);
-}
-
-/* Return our slave address. This is the address
- * put on the I2C bus when another master on the bus wants to address us
- * as a slave
- */
-static int iic_ite_getown(void *data)
-{
- return (gpi.iic_own);
-}
-
-
-static int iic_ite_getclock(void *data)
-{
- return (gpi.iic_clock);
-}
-
-
-/* Put this process to sleep. We will wake up when the
- * IIC controller interrupts.
- */
-static void iic_ite_waitforpin(void) {
- DEFINE_WAIT(wait);
- int timeout = 2;
- unsigned long flags;
-
- /* If interrupts are enabled (which they are), then put the process to
- * sleep. This process will be awakened by two events -- either the
- * the IIC peripheral interrupts or the timeout expires.
- * If interrupts are not enabled then delay for a reasonable amount
- * of time and return.
- */
- if (gpi.iic_irq > 0) {
- spin_lock_irqsave(&lock, flags);
- if (iic_pending == 0) {
- spin_unlock_irqrestore(&lock, flags);
- prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE);
- if (schedule_timeout(timeout*HZ)) {
- spin_lock_irqsave(&lock, flags);
- if (iic_pending == 1) {
- iic_pending = 0;
- }
- spin_unlock_irqrestore(&lock, flags);
- }
- finish_wait(&iic_wait, &wait);
- } else {
- iic_pending = 0;
- spin_unlock_irqrestore(&lock, flags);
- }
- } else {
- udelay(100);
- }
-}
-
-
-static irqreturn_t iic_ite_handler(int this_irq, void *dev_id)
-{
- spin_lock(&lock);
- iic_pending = 1;
- spin_unlock(&lock);
-
- wake_up_interruptible(&iic_wait);
-
- return IRQ_HANDLED;
-}
-
-
-/* Lock the region of memory where I/O registers exist. Request our
- * interrupt line and register its associated handler.
- */
-static int iic_hw_resrc_init(void)
-{
- if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c"))
- return -ENODEV;
-
- if (gpi.iic_irq <= 0)
- return 0;
-
- if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0)
- gpi.iic_irq = 0;
- else
- enable_irq(gpi.iic_irq);
-
- return 0;
-}
-
-
-static void iic_ite_release(void)
-{
- if (gpi.iic_irq > 0) {
- disable_irq(gpi.iic_irq);
- free_irq(gpi.iic_irq, 0);
- }
- release_region(gpi.iic_base , 2);
-}
-
-/* ------------------------------------------------------------------------
- * Encapsulate the above functions in the correct operations structure.
- * This is only done when more than one hardware adapter is supported.
- */
-static struct i2c_algo_iic_data iic_ite_data = {
- NULL,
- iic_ite_setiic,
- iic_ite_getiic,
- iic_ite_getown,
- iic_ite_getclock,
- iic_ite_waitforpin,
- 80, 80, 100, /* waits, timeout */
-};
-
-static struct i2c_adapter iic_ite_ops = {
- .owner = THIS_MODULE,
- .id = I2C_HW_I_IIC,
- .algo_data = &iic_ite_data,
- .name = "ITE IIC adapter",
-};
-
-/* Called when the module is loaded. This function starts the
- * cascade of calls up through the hierarchy of i2c modules (i.e. up to the
- * algorithm layer and into to the core layer)
- */
-static int __init iic_ite_init(void)
-{
-
- struct iic_ite *piic = &gpi;
-
- printk(KERN_INFO "Initialize ITE IIC adapter module\n");
- if (base == 0)
- piic->iic_base = DEFAULT_BASE;
- else
- piic->iic_base = base;
-
- if (irq == 0)
- piic->iic_irq = DEFAULT_IRQ;
- else
- piic->iic_irq = irq;
-
- if (clock == 0)
- piic->iic_clock = DEFAULT_CLOCK;
- else
- piic->iic_clock = clock;
-
- if (own == 0)
- piic->iic_own = DEFAULT_OWN;
- else
- piic->iic_own = own;
-
- iic_ite_data.data = (void *)piic;
- init_waitqueue_head(&iic_wait);
- spin_lock_init(&lock);
- if (iic_hw_resrc_init() == 0) {
- if (i2c_iic_add_bus(&iic_ite_ops) < 0)
- return -ENODEV;
- } else {
- return -ENODEV;
- }
- printk(KERN_INFO " found device at %#x irq %d.\n",
- piic->iic_base, piic->iic_irq);
- return 0;
-}
-
-
-static void iic_ite_exit(void)
-{
- i2c_iic_del_bus(&iic_ite_ops);
- iic_ite_release();
-}
-
-/* If modules is NOT defined when this file is compiled, then the MODULE_*
- * macros will resolve to nothing
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter");
-MODULE_LICENSE("GPL");
-
-module_param(base, int, 0);
-module_param(irq, int, 0);
-module_param(clock, int, 0);
-module_param(own, int, 0);
-
-
-/* Called when module is loaded or when kernel is initialized.
- * If MODULES is defined when this file is compiled, then this function will
- * resolve to init_module (the function called when insmod is invoked for a
- * module). Otherwise, this function is called early in the boot, when the
- * kernel is intialized. Check out /include/init.h to see how this works.
- */
-module_init(iic_ite_init);
-
-/* Resolves to module_cleanup when MODULES is defined. */
-module_exit(iic_ite_exit);
platform_set_drvdata(plat_dev, NULL);
- i2c_bit_del_bus(&drv_data->adapter);
+ i2c_del_adapter(&drv_data->adapter);
kfree(drv_data);
platform_set_drvdata(plat_dev, NULL);
- i2c_bit_del_bus(&drv_data->adapter);
+ i2c_del_adapter(&drv_data->adapter);
kfree(drv_data);
nForce4 MCP55 0368
This driver supports the 2 SMBuses that are included in the MCP of the
- nForce2/3/4 chipsets.
+ nForce2/3/4/5xx chipsets.
*/
/* Note: we assume there can only be one nForce2, with two SMBus interfaces */
#include <asm/io.h>
MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>");
-MODULE_DESCRIPTION("nForce2 SMBus driver");
+MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@gmx.net>");
+MODULE_DESCRIPTION("nForce2/3/4/5xx SMBus driver");
struct nforce2_smbus {
#define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */
#define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */
#define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */
-#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data bytes */
-#define NVIDIA_SMB_ALRM_A (smbus->base + 0x25) /* alarm address */
-#define NVIDIA_SMB_ALRM_D (smbus->base + 0x26) /* 2 bytes alarm data */
#define NVIDIA_SMB_STS_DONE 0x80
#define NVIDIA_SMB_STS_ALRM 0x40
#define NVIDIA_SMB_PRTCL_BYTE 0x04
#define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06
#define NVIDIA_SMB_PRTCL_WORD_DATA 0x08
-#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a
-#define NVIDIA_SMB_PRTCL_PROC_CALL 0x0c
-#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL 0x0d
-#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a
#define NVIDIA_SMB_PRTCL_PEC 0x80
static struct pci_driver nforce2_driver;
-static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data *data);
-static u32 nforce2_func(struct i2c_adapter *adapter);
-
-
-static const struct i2c_algorithm smbus_algorithm = {
- .smbus_xfer = nforce2_access,
- .functionality = nforce2_func,
-};
-
-static struct i2c_adapter nforce2_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON,
- .algo = &smbus_algorithm,
-};
-
-/* Return -1 on error. See smbus.h for more information */
+/* Return -1 on error */
static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data)
{
struct nforce2_smbus *smbus = adap->algo_data;
unsigned char protocol, pec, temp;
- unsigned char len = 0; /* to keep the compiler quiet */
- int i;
protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
NVIDIA_SMB_PRTCL_WRITE;
protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
break;
- case I2C_SMBUS_BLOCK_DATA:
- outb_p(command, NVIDIA_SMB_CMD);
- if (read_write == I2C_SMBUS_WRITE) {
- len = min_t(u8, data->block[0], 32);
- outb_p(len, NVIDIA_SMB_BCNT);
- for (i = 0; i < len; i++)
- outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
- }
- protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
- break;
-
- case I2C_SMBUS_I2C_BLOCK_DATA:
- len = min_t(u8, data->block[0], 32);
- outb_p(command, NVIDIA_SMB_CMD);
- outb_p(len, NVIDIA_SMB_BCNT);
- if (read_write == I2C_SMBUS_WRITE)
- for (i = 0; i < len; i++)
- outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
- protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA;
- break;
-
- case I2C_SMBUS_PROC_CALL:
- dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
-
- case I2C_SMBUS_BLOCK_PROC_CALL:
- dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
- return -1;
-
default:
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
break;
case I2C_SMBUS_WORD_DATA:
- /* case I2C_SMBUS_PROC_CALL: not supported */
data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
break;
-
- case I2C_SMBUS_BLOCK_DATA:
- /* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */
- len = inb_p(NVIDIA_SMB_BCNT);
- len = min_t(u8, len, 32);
- case I2C_SMBUS_I2C_BLOCK_DATA:
- for (i = 0; i < len; i++)
- data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
- data->block[0] = len;
- break;
}
return 0;
{
/* other functionality might be possible, but is not tested */
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* |
- I2C_FUNC_SMBUS_BLOCK_DATA */;
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
}
+static struct i2c_algorithm smbus_algorithm = {
+ .smbus_xfer = nforce2_access,
+ .functionality = nforce2_func,
+};
+
static struct pci_device_id nforce2_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) },
{ 0 }
};
-
MODULE_DEVICE_TABLE (pci, nforce2_ids);
}
smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK;
- smbus->size = 8;
+ smbus->size = 64;
}
smbus->dev = dev;
smbus->base, smbus->base+smbus->size-1, name);
return -1;
}
- smbus->adapter = nforce2_adapter;
+ smbus->adapter.owner = THIS_MODULE;
+ smbus->adapter.class = I2C_CLASS_HWMON;
+ smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
smbus->adapter.dev.parent = &dev->dev;
snprintf(smbus->adapter.name, I2C_NAME_SIZE,
* 13 2 1
* 19.2 2 1
*/
- if (fclk_rate > 16000000)
- psc = (fclk_rate + 8000000) / 12000000;
+ if (fclk_rate > 12000000)
+ psc = fclk_rate / 12000000;
}
/* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
if (adapter_parm[type].init.val)
line_set(0, &adapter_parm[type].init);
- i2c_bit_del_bus(&parport_adapter);
+ i2c_del_adapter(&parport_adapter);
release_region(base, 3);
}
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
- i2c_bit_del_bus(&adapter->adapter);
+ i2c_del_adapter(&adapter->adapter);
parport_unregister_device(adapter->pdev);
if (prev)
prev->next = adapter->next;
static void pca_isa_exit(void)
{
- i2c_pca_del_bus(&pca_isa_ops);
+ i2c_del_adapter(&pca_isa_ops);
if (irq > 0) {
disable_irq(irq);
--- /dev/null
+/*
+ * Provides I2C support for Philips PNX010x/PNX4008 boards.
+ *
+ * Authors: Dennis Kovalev <dkovalev@ru.mvista.com>
+ * Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-pnx.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define I2C_PNX_TIMEOUT 10 /* msec */
+#define I2C_PNX_SPEED_KHZ 100
+#define I2C_PNX_REGION_SIZE 0x100
+#define PNX_DEFAULT_FREQ 13 /* MHz */
+
+static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
+{
+ while (timeout > 0 &&
+ (ioread32(I2C_REG_STS(data)) & mstatus_active)) {
+ mdelay(1);
+ timeout--;
+ }
+ return (timeout <= 0);
+}
+
+static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
+{
+ while (timeout > 0 &&
+ (ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) {
+ mdelay(1);
+ timeout--;
+ }
+ return (timeout <= 0);
+}
+
+static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *data = adap->algo_data;
+ struct timer_list *timer = &data->mif.timer;
+ int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
+
+ del_timer_sync(timer);
+
+ dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n",
+ jiffies, expires);
+
+ timer->expires = jiffies + expires;
+ timer->data = (unsigned long)adap;
+
+ add_timer(timer);
+}
+
+/**
+ * i2c_pnx_start - start a device
+ * @slave_addr: slave address
+ * @adap: pointer to adapter structure
+ *
+ * Generate a START signal in the desired mode.
+ */
+static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+ dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __FUNCTION__,
+ slave_addr, alg_data->mif.mode);
+
+ /* Check for 7 bit slave addresses only */
+ if (slave_addr & ~0x7f) {
+ dev_err(&adap->dev, "%s: Invalid slave address %x. "
+ "Only 7-bit addresses are supported\n",
+ adap->name, slave_addr);
+ return -EINVAL;
+ }
+
+ /* First, make sure bus is idle */
+ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
+ /* Somebody else is monopolizing the bus */
+ dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, "
+ "cntrl = %x, stat = %x\n",
+ adap->name, slave_addr,
+ ioread32(I2C_REG_CTL(alg_data)),
+ ioread32(I2C_REG_STS(alg_data)));
+ return -EBUSY;
+ } else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
+ /* Sorry, we lost the bus */
+ dev_err(&adap->dev, "%s: Arbitration failure. "
+ "Slave addr = %02x\n", adap->name, slave_addr);
+ return -EIO;
+ }
+
+ /*
+ * OK, I2C is enabled and we have the bus.
+ * Clear the current TDI and AFI status flags.
+ */
+ iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
+ I2C_REG_STS(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): sending %#x\n", __FUNCTION__,
+ (slave_addr << 1) | start_bit | alg_data->mif.mode);
+
+ /* Write the slave address, START bit and R/W bit */
+ iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
+ I2C_REG_TX(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): exit\n", __FUNCTION__);
+
+ return 0;
+}
+
+/**
+ * i2c_pnx_stop - stop a device
+ * @adap: pointer to I2C adapter structure
+ *
+ * Generate a STOP signal to terminate the master transaction.
+ */
+static void i2c_pnx_stop(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ /* Only 1 msec max timeout due to interrupt context */
+ long timeout = 1000;
+
+ dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ /* Write a STOP bit to TX FIFO */
+ iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data));
+
+ /* Wait until the STOP is seen. */
+ while (timeout > 0 &&
+ (ioread32(I2C_REG_STS(alg_data)) & mstatus_active)) {
+ /* may be called from interrupt context */
+ udelay(1);
+ timeout--;
+ }
+
+ dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+}
+
+/**
+ * i2c_pnx_master_xmit - transmit data to slave
+ * @adap: pointer to I2C adapter structure
+ *
+ * Sends one byte of data to the slave
+ */
+static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 val;
+
+ dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ if (alg_data->mif.len > 0) {
+ /* We still have something to talk about... */
+ val = *alg_data->mif.buf++;
+
+ if (alg_data->mif.len == 1) {
+ val |= stop_bit;
+ if (!alg_data->last)
+ val |= start_bit;
+ }
+
+ alg_data->mif.len--;
+ iowrite32(val, I2C_REG_TX(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __FUNCTION__,
+ val, alg_data->mif.len + 1);
+
+ if (alg_data->mif.len == 0) {
+ if (alg_data->last) {
+ /* Wait until the STOP is seen. */
+ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+ dev_err(&adap->dev, "The bus is still "
+ "active after timeout\n");
+ }
+ /* Disable master interrupts */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+ ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+ I2C_REG_CTL(alg_data));
+
+ del_timer_sync(&alg_data->mif.timer);
+
+ dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n",
+ __FUNCTION__);
+
+ complete(&alg_data->mif.complete);
+ }
+ } else if (alg_data->mif.len == 0) {
+ /* zero-sized transfer */
+ i2c_pnx_stop(adap);
+
+ /* Disable master interrupts. */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+ ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+ I2C_REG_CTL(alg_data));
+
+ /* Stop timer. */
+ del_timer_sync(&alg_data->mif.timer);
+ dev_dbg(&adap->dev, "%s(): Waking up xfer routine after "
+ "zero-xfer.\n", __FUNCTION__);
+
+ complete(&alg_data->mif.complete);
+ }
+
+ dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ return 0;
+}
+
+/**
+ * i2c_pnx_master_rcv - receive data from slave
+ * @adap: pointer to I2C adapter structure
+ *
+ * Reads one byte data from the slave
+ */
+static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ unsigned int val = 0;
+ u32 ctl = 0;
+
+ dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ /* Check, whether there is already data,
+ * or we didn't 'ask' for it yet.
+ */
+ if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
+ dev_dbg(&adap->dev, "%s(): Write dummy data to fill "
+ "Rx-fifo...\n", __FUNCTION__);
+
+ if (alg_data->mif.len == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+ if (!alg_data->last)
+ val |= start_bit;
+
+ /*
+ * Enable interrupt RFDAIE (data in Rx fifo),
+ * and disable DRMIE (need data for Tx)
+ */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl |= mcntrl_rffie | mcntrl_daie;
+ ctl &= ~mcntrl_drmie;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ }
+
+ /*
+ * Now we'll 'ask' for data:
+ * For each byte we want to receive, we must
+ * write a (dummy) byte to the Tx-FIFO.
+ */
+ iowrite32(val, I2C_REG_TX(alg_data));
+
+ return 0;
+ }
+
+ /* Handle data. */
+ if (alg_data->mif.len > 0) {
+ val = ioread32(I2C_REG_RX(alg_data));
+ *alg_data->mif.buf++ = (u8) (val & 0xff);
+ dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __FUNCTION__, val,
+ alg_data->mif.len);
+
+ alg_data->mif.len--;
+ if (alg_data->mif.len == 0) {
+ if (alg_data->last)
+ /* Wait until the STOP is seen. */
+ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+ dev_err(&adap->dev, "The bus is still "
+ "active after timeout\n");
+
+ /* Disable master interrupts */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+ mcntrl_drmie | mcntrl_daie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ /* Kill timer. */
+ del_timer_sync(&alg_data->mif.timer);
+ complete(&alg_data->mif.complete);
+ }
+ }
+
+ dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ return 0;
+}
+
+static irqreturn_t
+i2c_pnx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ u32 stat, ctl;
+ struct i2c_adapter *adap = dev_id;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+ dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
+ __FUNCTION__,
+ ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)),
+ alg_data->mif.mode);
+ stat = ioread32(I2C_REG_STS(alg_data));
+
+ /* let's see what kind of event this is */
+ if (stat & mstatus_afi) {
+ /* We lost arbitration in the midst of a transfer */
+ alg_data->mif.ret = -EIO;
+
+ /* Disable master interrupts. */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+ mcntrl_drmie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ /* Stop timer, to prevent timeout. */
+ del_timer_sync(&alg_data->mif.timer);
+ complete(&alg_data->mif.complete);
+ } else if (stat & mstatus_nai) {
+ /* Slave did not acknowledge, generate a STOP */
+ dev_dbg(&adap->dev, "%s(): "
+ "Slave did not acknowledge, generating a STOP.\n",
+ __FUNCTION__);
+ i2c_pnx_stop(adap);
+
+ /* Disable master interrupts. */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+ mcntrl_drmie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ /* Our return value. */
+ alg_data->mif.ret = -EIO;
+
+ /* Stop timer, to prevent timeout. */
+ del_timer_sync(&alg_data->mif.timer);
+ complete(&alg_data->mif.complete);
+ } else {
+ /*
+ * Two options:
+ * - Master Tx needs data.
+ * - There is data in the Rx-fifo
+ * The latter is only the case if we have requested for data,
+ * via a dummy write. (See 'i2c_pnx_master_rcv'.)
+ * We therefore check, as a sanity check, whether that interrupt
+ * has been enabled.
+ */
+ if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
+ if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
+ i2c_pnx_master_xmit(adap);
+ } else if (alg_data->mif.mode == I2C_SMBUS_READ) {
+ i2c_pnx_master_rcv(adap);
+ }
+ }
+ }
+
+ /* Clear TDI and AFI bits */
+ stat = ioread32(I2C_REG_STS(alg_data));
+ iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)));
+
+ return IRQ_HANDLED;
+}
+
+static void i2c_pnx_timeout(unsigned long data)
+{
+ struct i2c_adapter *adap = (struct i2c_adapter *)data;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 ctl;
+
+ dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. "
+ "Resetting master...\n",
+ ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)));
+
+ /* Reset master and disable interrupts */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | mcntrl_drmie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ ctl |= mcntrl_reset;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ alg_data->mif.ret = -EIO;
+ complete(&alg_data->mif.complete);
+}
+
+static inline void bus_reset_if_active(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 stat;
+
+ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
+ dev_err(&adap->dev,
+ "%s: Bus is still active after xfer. Reset it...\n",
+ adap->name);
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+ I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ } else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) {
+ /* If there is data in the fifo's after transfer,
+ * flush fifo's by reset.
+ */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+ I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ } else if (stat & mstatus_nai) {
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+ I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ }
+}
+
+/**
+ * i2c_pnx_xfer - generic transfer entry point
+ * @adap: pointer to I2C adapter structure
+ * @msgs: array of messages
+ * @num: number of messages
+ *
+ * Initiates the transfer
+ */
+static int
+i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct i2c_msg *pmsg;
+ int rc = 0, completed = 0, i;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 stat = ioread32(I2C_REG_STS(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
+ __FUNCTION__, num, ioread32(I2C_REG_STS(alg_data)));
+
+ bus_reset_if_active(adap);
+
+ /* Process transactions in a loop. */
+ for (i = 0; rc >= 0 && i < num; i++) {
+ u8 addr;
+
+ pmsg = &msgs[i];
+ addr = pmsg->addr;
+
+ if (pmsg->flags & I2C_M_TEN) {
+ dev_err(&adap->dev,
+ "%s: 10 bits addr not supported!\n",
+ adap->name);
+ rc = -EINVAL;
+ break;
+ }
+
+ alg_data->mif.buf = pmsg->buf;
+ alg_data->mif.len = pmsg->len;
+ alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
+ I2C_SMBUS_READ : I2C_SMBUS_WRITE;
+ alg_data->mif.ret = 0;
+ alg_data->last = (i == num - 1);
+
+ dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __FUNCTION__,
+ alg_data->mif.mode,
+ alg_data->mif.len);
+
+ i2c_pnx_arm_timer(adap);
+
+ /* initialize the completion var */
+ init_completion(&alg_data->mif.complete);
+
+ /* Enable master interrupt */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_afie |
+ mcntrl_naie | mcntrl_drmie,
+ I2C_REG_CTL(alg_data));
+
+ /* Put start-code and slave-address on the bus. */
+ rc = i2c_pnx_start(addr, adap);
+ if (rc < 0)
+ break;
+
+ /* Wait for completion */
+ wait_for_completion(&alg_data->mif.complete);
+
+ if (!(rc = alg_data->mif.ret))
+ completed++;
+ dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n",
+ __FUNCTION__, rc);
+
+ /* Clear TDI and AFI bits in case they are set. */
+ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
+ dev_dbg(&adap->dev,
+ "%s: TDI still set... clearing now.\n",
+ adap->name);
+ iowrite32(stat, I2C_REG_STS(alg_data));
+ }
+ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
+ dev_dbg(&adap->dev,
+ "%s: AFI still set... clearing now.\n",
+ adap->name);
+ iowrite32(stat, I2C_REG_STS(alg_data));
+ }
+ }
+
+ bus_reset_if_active(adap);
+
+ /* Cleanup to be sure... */
+ alg_data->mif.buf = NULL;
+ alg_data->mif.len = 0;
+
+ dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ if (completed != num)
+ return ((rc < 0) ? rc : -EREMOTEIO);
+
+ return num;
+}
+
+static u32 i2c_pnx_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm pnx_algorithm = {
+ .master_xfer = i2c_pnx_xfer,
+ .functionality = i2c_pnx_func,
+};
+
+static int i2c_pnx_controller_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+ return i2c_pnx->suspend(pdev, state);
+}
+
+static int i2c_pnx_controller_resume(struct platform_device *pdev)
+{
+ struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+ return i2c_pnx->resume(pdev);
+}
+
+static int __devinit i2c_pnx_probe(struct platform_device *pdev)
+{
+ unsigned long tmp;
+ int ret = 0;
+ struct i2c_pnx_algo_data *alg_data;
+ int freq_mhz;
+ struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
+
+ if (!i2c_pnx || !i2c_pnx->adapter) {
+ dev_err(&pdev->dev, "%s: no platform data supplied\n",
+ __FUNCTION__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ platform_set_drvdata(pdev, i2c_pnx);
+
+ if (i2c_pnx->calculate_input_freq)
+ freq_mhz = i2c_pnx->calculate_input_freq(pdev);
+ else {
+ freq_mhz = PNX_DEFAULT_FREQ;
+ dev_info(&pdev->dev, "Setting bus frequency to default value: "
+ "%d MHz", freq_mhz);
+ }
+
+ i2c_pnx->adapter->algo = &pnx_algorithm;
+
+ alg_data = i2c_pnx->adapter->algo_data;
+ init_timer(&alg_data->mif.timer);
+ alg_data->mif.timer.function = i2c_pnx_timeout;
+ alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
+
+ /* Register I/O resource */
+ if (!request_region(alg_data->base, I2C_PNX_REGION_SIZE, pdev->name)) {
+ dev_err(&pdev->dev,
+ "I/O region 0x%08x for I2C already in use.\n",
+ alg_data->base);
+ ret = -ENODEV;
+ goto out_drvdata;
+ }
+
+ if (!(alg_data->ioaddr =
+ (u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) {
+ dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
+ ret = -ENOMEM;
+ goto out_release;
+ }
+
+ i2c_pnx->set_clock_run(pdev);
+
+ /*
+ * Clock Divisor High This value is the number of system clocks
+ * the serial clock (SCL) will be high.
+ * For example, if the system clock period is 50 ns and the maximum
+ * desired serial period is 10000 ns (100 kHz), then CLKHI would be
+ * set to 0.5*(f_sys/f_i2c)-2=0.5*(20e6/100e3)-2=98. The actual value
+ * programmed into CLKHI will vary from this slightly due to
+ * variations in the output pad's rise and fall times as well as
+ * the deglitching filter length.
+ */
+
+ tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+ iowrite32(tmp, I2C_REG_CKH(alg_data));
+ iowrite32(tmp, I2C_REG_CKL(alg_data));
+
+ iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
+ if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) {
+ ret = -ENODEV;
+ goto out_unmap;
+ }
+ init_completion(&alg_data->mif.complete);
+
+ ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
+ 0, pdev->name, i2c_pnx->adapter);
+ if (ret)
+ goto out_clock;
+
+ /* Register this adapter with the I2C subsystem */
+ i2c_pnx->adapter->dev.parent = &pdev->dev;
+ ret = i2c_add_adapter(i2c_pnx->adapter);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "I2C: Failed to add bus\n");
+ goto out_irq;
+ }
+
+ dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
+ i2c_pnx->adapter->name, alg_data->base, alg_data->irq);
+
+ return 0;
+
+out_irq:
+ free_irq(alg_data->irq, alg_data);
+out_clock:
+ i2c_pnx->set_clock_stop(pdev);
+out_unmap:
+ iounmap((void *)alg_data->ioaddr);
+out_release:
+ release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+out_drvdata:
+ platform_set_drvdata(pdev, NULL);
+out:
+ return ret;
+}
+
+static int __devexit i2c_pnx_remove(struct platform_device *pdev)
+{
+ struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+ struct i2c_adapter *adap = i2c_pnx->adapter;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+ free_irq(alg_data->irq, alg_data);
+ i2c_del_adapter(adap);
+ i2c_pnx->set_clock_stop(pdev);
+ iounmap((void *)alg_data->ioaddr);
+ release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver i2c_pnx_driver = {
+ .driver = {
+ .name = "pnx-i2c",
+ .owner = THIS_MODULE,
+ },
+ .probe = i2c_pnx_probe,
+ .remove = __devexit_p(i2c_pnx_remove),
+ .suspend = i2c_pnx_controller_suspend,
+ .resume = i2c_pnx_controller_resume,
+};
+
+static int __init i2c_adap_pnx_init(void)
+{
+ return platform_driver_register(&i2c_pnx_driver);
+}
+
+static void __exit i2c_adap_pnx_exit(void)
+{
+ platform_driver_unregister(&i2c_pnx_driver);
+}
+
+MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>");
+MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_I2C_PNX_EARLY
+/* We need to make sure I2C is initialized before USB */
+subsys_initcall(i2c_adap_pnx_init);
+#else
+mudule_init(i2c_adap_pnx_init);
+#endif
+module_exit(i2c_adap_pnx_exit);
if (chip->i2c_bus[i].adap_ok == 0)
continue;
- ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
+ ret = i2c_del_adapter(&chip->i2c_bus[i].adap);
if (ret) {
dev_err(&dev->dev, "%s not removed\n",
chip->i2c_bus[i].adap.name);
static void __devexit savage4_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&savage4_i2c_adapter);
+ i2c_del_adapter(&savage4_i2c_adapter);
iounmap(ioaddr);
}
--- /dev/null
+/*
+ * i2c-versatile.c
+ *
+ * Copyright (C) 2006 ARM Ltd.
+ * written by Russell King, Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#define I2C_CONTROL 0x00
+#define I2C_CONTROLS 0x00
+#define I2C_CONTROLC 0x04
+#define SCL (1 << 0)
+#define SDA (1 << 1)
+
+struct i2c_versatile {
+ struct i2c_adapter adap;
+ struct i2c_algo_bit_data algo;
+ void __iomem *base;
+};
+
+static void i2c_versatile_setsda(void *data, int state)
+{
+ struct i2c_versatile *i2c = data;
+
+ writel(SDA, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC));
+}
+
+static void i2c_versatile_setscl(void *data, int state)
+{
+ struct i2c_versatile *i2c = data;
+
+ writel(SCL, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC));
+}
+
+static int i2c_versatile_getsda(void *data)
+{
+ struct i2c_versatile *i2c = data;
+ return !!(readl(i2c->base + I2C_CONTROL) & SDA);
+}
+
+static int i2c_versatile_getscl(void *data)
+{
+ struct i2c_versatile *i2c = data;
+ return !!(readl(i2c->base + I2C_CONTROL) & SCL);
+}
+
+static struct i2c_algo_bit_data i2c_versatile_algo = {
+ .setsda = i2c_versatile_setsda,
+ .setscl = i2c_versatile_setscl,
+ .getsda = i2c_versatile_getsda,
+ .getscl = i2c_versatile_getscl,
+ .udelay = 30,
+ .timeout = HZ,
+};
+
+static int i2c_versatile_probe(struct platform_device *dev)
+{
+ struct i2c_versatile *i2c;
+ struct resource *r;
+ int ret;
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!r) {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ if (!request_mem_region(r->start, r->end - r->start + 1, "versatile-i2c")) {
+ ret = -EBUSY;
+ goto err_out;
+ }
+
+ i2c = kzalloc(sizeof(struct i2c_versatile), GFP_KERNEL);
+ if (!i2c) {
+ ret = -ENOMEM;
+ goto err_release;
+ }
+
+ i2c->base = ioremap(r->start, r->end - r->start + 1);
+ if (!i2c->base) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ writel(SCL | SDA, i2c->base + I2C_CONTROLS);
+
+ i2c->adap.owner = THIS_MODULE;
+ strlcpy(i2c->adap.name, "Versatile I2C adapter", sizeof(i2c->adap.name));
+ i2c->adap.algo_data = &i2c->algo;
+ i2c->adap.dev.parent = &dev->dev;
+ i2c->algo = i2c_versatile_algo;
+ i2c->algo.data = i2c;
+
+ ret = i2c_bit_add_bus(&i2c->adap);
+ if (ret >= 0) {
+ platform_set_drvdata(dev, i2c);
+ return 0;
+ }
+
+ iounmap(i2c->base);
+ err_free:
+ kfree(i2c);
+ err_release:
+ release_mem_region(r->start, r->end - r->start + 1);
+ err_out:
+ return ret;
+}
+
+static int i2c_versatile_remove(struct platform_device *dev)
+{
+ struct i2c_versatile *i2c = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+
+ i2c_del_adapter(&i2c->adap);
+ return 0;
+}
+
+static struct platform_driver i2c_versatile_driver = {
+ .probe = i2c_versatile_probe,
+ .remove = i2c_versatile_remove,
+ .driver = {
+ .name = "versatile-i2c",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init i2c_versatile_init(void)
+{
+ return platform_driver_register(&i2c_versatile_driver);
+}
+
+static void __exit i2c_versatile_exit(void)
+{
+ platform_driver_unregister(&i2c_versatile_driver);
+}
+
+module_init(i2c_versatile_init);
+module_exit(i2c_versatile_exit);
+
+MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
+MODULE_LICENSE("GPL");
static void __devexit vt586b_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&vt586b_adapter);
+ i2c_del_adapter(&vt586b_adapter);
release_region(I2C_DIR, IOSPACE);
pm_io_base = 0;
}
return retval;
retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
if (retval)
- i2c_bit_del_bus(&voodoo3_i2c_adapter);
+ i2c_del_adapter(&voodoo3_i2c_adapter);
return retval;
}
static void __devexit voodoo3_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&voodoo3_i2c_adapter);
- i2c_bit_del_bus(&voodoo3_ddc_adapter);
+ i2c_del_adapter(&voodoo3_i2c_adapter);
+ i2c_del_adapter(&voodoo3_ddc_adapter);
iounmap(ioaddr);
}
static void scx200_i2c_cleanup(void)
{
- i2c_bit_del_bus(&scx200_i2c_ops);
+ i2c_del_adapter(&scx200_i2c_ops);
}
module_init(scx200_i2c_init);
if ((status & 0x80) || (control & 0x80)) {
/* RTC not running */
- u8 buf[16];
+ u8 buf[1+16]; /* First byte is interpreted as address */
struct i2c_msg msg[1];
dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__);
/* Initialize all, including STATUS and CONTROL to zero */
memset(buf, 0, sizeof(buf));
+
+ /* Write valid values in the date/time registers */
+ buf[1+DS1337_REG_DAY] = 1;
+ buf[1+DS1337_REG_DATE] = 1;
+ buf[1+DS1337_REG_MONTH] = 1;
+
msg[0].addr = client->addr;
msg[0].flags = 0;
msg[0].len = sizeof(buf);
struct i2c_client client;
struct mutex lock;
int irq;
- struct work_struct work;
+ struct delayed_work work;
struct dentry *file;
unsigned charging:1;
unsigned por:1;
{
u8 tmp = 0, mask, poll;
- /* IRQs won't trigger irqs for certain events, but we can get
+ /* IRQs won't trigger for certain events, but we can get
* others by polling (normally, with external power applied).
*/
poll = 0;
}
/* handle IRQs and polling using keventd for now */
-static void tps65010_work(void *_tps)
+static void tps65010_work(struct work_struct *work)
{
- struct tps65010 *tps = _tps;
+ struct tps65010 *tps;
+ tps = container_of(work, struct tps65010, work.work);
mutex_lock(&tps->lock);
tps65010_interrupt(tps);
disable_irq_nosync(irq);
set_bit(FLAG_IRQ_ENABLE, &tps->flags);
- (void) schedule_work(&tps->work);
+ (void) schedule_work(&tps->work.work);
return IRQ_HANDLED;
}
struct tps65010 *tps;
tps = container_of(client, struct tps65010, client);
+ free_irq(tps->irq, tps);
#ifdef CONFIG_ARM
if (machine_is_omap_h2())
omap_free_gpio(58);
if (machine_is_omap_osk())
omap_free_gpio(OMAP_MPUIO(1));
#endif
- free_irq(tps->irq, tps);
+ cancel_delayed_work(&tps->work);
+ flush_scheduled_work();
debugfs_remove(tps->file);
if (i2c_detach_client(client) == 0)
kfree(tps);
return 0;
mutex_init(&tps->lock);
- INIT_WORK(&tps->work, tps65010_work, tps);
+ INIT_DELAYED_WORK(&tps->work, tps65010_work);
tps->irq = -1;
tps->client.addr = address;
tps->client.adapter = bus;
(void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK3, 0x0f
| i2c_smbus_read_byte_data(&tps->client, TPS_MASK3));
- tps65010_work(tps);
+ tps65010_work(&tps->work.work);
tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
tps, DEBUG_FOPS);
&& test_and_set_bit(
FLAG_VBUS_CHANGED, &the_tps->flags)) {
/* gadget drivers call this in_irq() */
- (void) schedule_work(&the_tps->work);
+ (void) schedule_work(&the_tps->work.work);
}
local_irq_restore(flags);
return sprintf(buf, "%s\n", client->name);
}
-/*
- * We can't use the DEVICE_ATTR() macro here as we want the same filename for a
- * different type of a device. So beware if the DEVICE_ATTR() macro ever
- * changes, this definition will also have to change.
+/*
+ * We can't use the DEVICE_ATTR() macro here, as we used the same name for
+ * an i2c adapter attribute (above).
*/
-static struct device_attribute dev_attr_client_name = {
- .attr = {.name = "name", .mode = S_IRUGO, .owner = THIS_MODULE },
- .show = &show_client_name,
-};
+static struct device_attribute dev_attr_client_name =
+ __ATTR(name, S_IRUGO, &show_client_name, NULL);
/* ---------------------------------------------------
- * registering functions
- * ---------------------------------------------------
+ * registering functions
+ * ---------------------------------------------------
*/
/* -----
res = driver_register(&driver->driver);
if (res)
return res;
-
+
mutex_lock(&core_lists);
list_add_tail(&driver->list,&drivers);
struct list_head *item1, *item2, *_n;
struct i2c_client *client;
struct i2c_adapter *adap;
-
+
int res = 0;
mutex_lock(&core_lists);
/* Have a look at each adapter, if clients of this driver are still
- * attached. If so, detach them to be able to kill the driver
+ * attached. If so, detach them to be able to kill the driver
* afterwards.
*/
list_for_each(item1,&adapters) {
goto out_unlock;
}
list_add_tail(&client->list,&adapter->clients);
-
+
client->usage_count = 0;
client->dev.parent = &client->adapter->dev;
client->dev.driver = &client->driver->driver;
client->dev.bus = &i2c_bus_type;
client->dev.release = &i2c_client_release;
-
+
snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
"%d-%04x", i2c_adapter_id(adapter), client->addr);
dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
{
struct i2c_adapter *adapter = client->adapter;
int res = 0;
-
+
if (client->usage_count > 0) {
dev_warn(&client->dev, "Client [%s] still busy, "
"can't detach\n", client->name);
__FUNCTION__);
return -EPERM;
}
-
+
client->usage_count--;
i2c_dec_use_client(client);
-
+
return 0;
}
}
#endif
- mutex_lock(&adap->bus_lock);
+ mutex_lock_nested(&adap->bus_lock, adap->level);
ret = adap->algo->master_xfer(adap,msgs,num);
mutex_unlock(&adap->bus_lock);
msg.flags = client->flags & I2C_M_TEN;
msg.len = count;
msg.buf = (char *)buf;
-
+
ret = i2c_transfer(adap, &msg, 1);
/* If everything went ok (i.e. 1 msg transmitted), return #bytes
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
if (address_data->probe[0] == I2C_CLIENT_END
&& address_data->normal_i2c[0] == I2C_CLIENT_END)
- return 0;
+ return 0;
dev_warn(&adapter->dev, "SMBus Quick command not supported, "
"can't probe for chips\n");
struct i2c_adapter* i2c_get_adapter(int id)
{
struct i2c_adapter *adapter;
-
+
mutex_lock(&core_lists);
adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id);
if (adapter && !try_module_get(adapter->owner))
/* The SMBus parts */
-#define POLY (0x1070U << 3)
+#define POLY (0x1070U << 3)
static u8
crc8(u16 data)
{
int i;
-
+
for(i = 0; i < 8; i++) {
- if (data & 0x8000)
+ if (data & 0x8000)
data = data ^ POLY;
data = data << 1;
}
rpec, cpec);
return -1;
}
- return 0;
+ return 0;
}
s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
- value,0,I2C_SMBUS_QUICK,NULL);
+ value,0,I2C_SMBUS_QUICK,NULL);
}
s32 i2c_smbus_read_byte(struct i2c_client *client)
I2C_SMBUS_I2C_BLOCK_DATA, &data);
}
-/* Simulate a SMBus command using the i2c protocol
+/* Simulate a SMBus command using the i2c protocol
No checking of parameters is done! */
-static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
- char read_write, u8 command, int size,
+ char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
/* So we need to generate a series of msgs. In the case of writing, we
unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
int num = read_write == I2C_SMBUS_READ?2:1;
- struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
+ struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
{ addr, flags | I2C_M_RD, 0, msgbuf1 }
};
int i;
if (i) {
/* Compute PEC if first message is a write */
if (!(msg[0].flags & I2C_M_RD)) {
- if (num == 1) /* Write only */
+ if (num == 1) /* Write only */
i2c_smbus_add_pec(&msg[0]);
else /* Write followed by read */
partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
}
/* Ask for PEC if last message is a read */
if (msg[num-1].flags & I2C_M_RD)
- msg[num-1].len++;
+ msg[num-1].len++;
}
if (i2c_transfer(adapter, msg, num) < 0)
case I2C_SMBUS_BYTE_DATA:
data->byte = msgbuf1[0];
break;
- case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_WORD_DATA:
case I2C_SMBUS_PROC_CALL:
data->word = msgbuf1[0] | (msgbuf1[1] << 8);
break;
s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
- char read_write, u8 command, int size,
+ char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
s32 res;
/*
- i2c-dev.c - i2c-bus driver, char device interface
+ i2c-dev.c - i2c-bus driver, char device interface
Copyright (C) 1995-97 Simon G. Vogl
Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
spin_lock(&i2c_dev_list_lock);
list_del(&i2c_dev->list);
spin_unlock(&i2c_dev_list_lock);
+ kfree(i2c_dev);
}
static ssize_t show_adapter_name(struct device *dev,
return -ENOMEM;
pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n",
- iminor(file->f_dentry->d_inode), count);
+ iminor(file->f_path.dentry->d_inode), count);
ret = i2c_master_recv(client,tmp,count);
if (ret >= 0)
}
pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n",
- iminor(file->f_dentry->d_inode), count);
+ iminor(file->f_path.dentry->d_inode), count);
ret = i2c_master_send(client,tmp,count);
kfree(tmp);
switch ( cmd ) {
case I2C_SLAVE:
case I2C_SLAVE_FORCE:
- if ((arg > 0x3ff) ||
+ if ((arg > 0x3ff) ||
(((client->flags & I2C_M_TEN) == 0) && arg > 0x7f))
return -EINVAL;
if ((cmd == I2C_SLAVE) && i2c_check_addr(client->adapter,arg))
return 0;
case I2C_FUNCS:
funcs = i2c_get_functionality(client->adapter);
- return (copy_to_user((unsigned long __user *)arg, &funcs,
- sizeof(unsigned long)))?-EFAULT:0;
+ return put_user(funcs, (unsigned long __user *)arg);
case I2C_RDWR:
- if (copy_from_user(&rdwr_arg,
- (struct i2c_rdwr_ioctl_data __user *)arg,
+ if (copy_from_user(&rdwr_arg,
+ (struct i2c_rdwr_ioctl_data __user *)arg,
sizeof(rdwr_arg)))
return -EFAULT;
* be sent at once */
if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS)
return -EINVAL;
-
+
rdwr_pa = (struct i2c_msg *)
- kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
+ kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
GFP_KERNEL);
if (rdwr_pa == NULL) return -ENOMEM;
(struct i2c_smbus_ioctl_data __user *) arg,
sizeof(struct i2c_smbus_ioctl_data)))
return -EFAULT;
- if ((data_arg.size != I2C_SMBUS_BYTE) &&
+ if ((data_arg.size != I2C_SMBUS_BYTE) &&
(data_arg.size != I2C_SMBUS_QUICK) &&
- (data_arg.size != I2C_SMBUS_BYTE_DATA) &&
+ (data_arg.size != I2C_SMBUS_BYTE_DATA) &&
(data_arg.size != I2C_SMBUS_WORD_DATA) &&
(data_arg.size != I2C_SMBUS_PROC_CALL) &&
(data_arg.size != I2C_SMBUS_BLOCK_DATA) &&
data_arg.size);
return -EINVAL;
}
- /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1,
+ /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1,
so the check is valid if size==I2C_SMBUS_QUICK too. */
- if ((data_arg.read_write != I2C_SMBUS_READ) &&
+ if ((data_arg.read_write != I2C_SMBUS_READ) &&
(data_arg.read_write != I2C_SMBUS_WRITE)) {
- dev_dbg(&client->adapter->dev,
+ dev_dbg(&client->adapter->dev,
"read_write out of range (%x) in ioctl I2C_SMBUS.\n",
data_arg.read_write);
return -EINVAL;
/* Note that command values are always valid! */
if ((data_arg.size == I2C_SMBUS_QUICK) ||
- ((data_arg.size == I2C_SMBUS_BYTE) &&
+ ((data_arg.size == I2C_SMBUS_BYTE) &&
(data_arg.read_write == I2C_SMBUS_WRITE)))
/* These are special: we do not use data */
return i2c_smbus_xfer(client->adapter, client->addr,
if ((data_arg.size == I2C_SMBUS_BYTE_DATA) ||
(data_arg.size == I2C_SMBUS_BYTE))
datasize = sizeof(data_arg.data->byte);
- else if ((data_arg.size == I2C_SMBUS_WORD_DATA) ||
+ else if ((data_arg.size == I2C_SMBUS_WORD_DATA) ||
(data_arg.size == I2C_SMBUS_PROC_CALL))
datasize = sizeof(data_arg.data->word);
else /* size == smbus block, i2c block, or block proc. call */
datasize = sizeof(data_arg.data->block);
- if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
- (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+ if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+ (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(data_arg.read_write == I2C_SMBUS_WRITE)) {
if (copy_from_user(&temp, data_arg.data, datasize))
return -EFAULT;
res = i2c_smbus_xfer(client->adapter,client->addr,client->flags,
data_arg.read_write,
data_arg.command,data_arg.size,&temp);
- if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
- (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+ if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+ (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(data_arg.read_write == I2C_SMBUS_READ))) {
if (copy_to_user(data_arg.data, &temp, datasize))
return -EFAULT;
i2c_dev->dev = device_create(i2c_dev_class, &adap->dev,
MKDEV(I2C_MAJOR, adap->nr),
"i2c-%d", adap->nr);
- if (!i2c_dev->dev) {
- res = -ENODEV;
+ if (IS_ERR(i2c_dev->dev)) {
+ res = PTR_ERR(i2c_dev->dev);
goto error;
}
res = device_create_file(i2c_dev->dev, &dev_attr_name);
device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
error:
return_i2c_dev(i2c_dev);
- kfree(i2c_dev);
return res;
}
device_remove_file(i2c_dev->dev, &dev_attr_name);
return_i2c_dev(i2c_dev);
device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
- kfree(i2c_dev);
pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
return 0;
config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
int "Maximum transfer size (KB) per request (up to 128)"
default "128"
- depends BLK_DEV_IDE_AU1XXX
+ depends on BLK_DEV_IDE_AU1XXX
config IDE_ARM
def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
{
struct request *rq = HWGROUP(drive)->rq;
+ ide_hwif_t *hwif = HWIF(drive);
int stat, err, sense_key;
+ /* We may have bogus DMA interrupts in PIO state here */
+ if (HWIF(drive)->dma_status && hwif->atapi_irq_bogon) {
+ stat = hwif->INB(hwif->dma_status);
+ /* Should we force the bit as well ? */
+ hwif->OUTB(stat, hwif->dma_status);
+ }
/* Check for errors. */
stat = HWIF(drive)->INB(IDE_STATUS_REG);
if (stat_ret)
printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name);
goto failed;
}
- if ((floppy = (idefloppy_floppy_t *) kzalloc (sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) {
+ if ((floppy = kzalloc(sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) {
printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name);
goto failed;
}
/* needs drive->queue to be set */
ide_toggle_bounce(drive, 1);
- /* enable led activity for disk drives only */
- if (drive->media == ide_disk && hwif->led_act)
- blk_queue_activity_fn(q, hwif->led_act, drive);
-
return 0;
}
int pages = tape->pages_per_stage;
char *b_data = NULL;
- if ((stage = (idetape_stage_t *) kmalloc (sizeof (idetape_stage_t),GFP_KERNEL)) == NULL)
+ if ((stage = kmalloc(sizeof (idetape_stage_t),GFP_KERNEL)) == NULL)
return NULL;
stage->next = NULL;
- bh = stage->bh = (struct idetape_bh *)kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
+ bh = stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
if (bh == NULL)
goto abort;
bh->b_reqnext = NULL;
continue;
}
prev_bh = bh;
- if ((bh = (struct idetape_bh *)kmalloc(sizeof(struct idetape_bh), GFP_KERNEL)) == NULL) {
+ if ((bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL)) == NULL) {
free_page((unsigned long) b_data);
goto abort;
}
printk(KERN_WARNING "ide-tape: Use drive %s with ide-scsi emulation and osst.\n", drive->name);
printk(KERN_WARNING "ide-tape: OnStream support will be removed soon from ide-tape!\n");
}
- tape = (idetape_tape_t *) kzalloc (sizeof (idetape_tape_t), GFP_KERNEL);
+ tape = kzalloc(sizeof (idetape_tape_t), GFP_KERNEL);
if (tape == NULL) {
printk(KERN_ERR "ide-tape: %s: Can't allocate a tape structure\n", drive->name);
goto failed;
{
unsigned long flags;
u8 tmpbyte;
- struct pci_dev *north = pci_find_slot(0, PCI_DEVFN(0,0));
+ struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision);
- isa_dev = pci_find_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+ isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
#if defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_PROC_FS)
if (!ali_proc) {
* clear bit 7
*/
pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F);
- local_irq_restore(flags);
- return 0;
+ goto out;
}
/*
* box without a device at 0:0.0. The ALi bridge will be at
* 0:0.0 so if we didn't find one we know what is cooking.
*/
- if (north && north->vendor != PCI_VENDOR_ID_AL) {
- local_irq_restore(flags);
- return 0;
- }
+ if (north && north->vendor != PCI_VENDOR_ID_AL)
+ goto out;
if (m5229_revision < 0xC5 && isa_dev)
{
pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02);
}
}
+out:
+ pci_dev_put(north);
+ pci_dev_put(isa_dev);
local_irq_restore(flags);
return 0;
}
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
+ * Portions Copyright (C) 2005-2006 MontaVista Software, Inc.
*
* Thanks to HighPoint Technologies for their assistance, and hardware.
* Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
* development and support.
*
*
- * Highpoint have their own driver (source except for the raid part)
- * available from http://www.highpoint-tech.com/hpt3xx-opensource-v131.tgz
- * This may be useful to anyone wanting to work on the mainstream hpt IDE.
+ * HighPoint has its own drivers (open source except for the RAID part)
+ * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.
+ * This may be useful to anyone wanting to work on this driver, however do not
+ * trust them too much since the code tends to become less and less meaningful
+ * as the time passes... :-/
*
* Note that final HPT370 support was done by force extraction of GPL.
*
* keeping me sane.
* Alan Cox <alan@redhat.com>
*
+ * - fix the clock turnaround code: it was writing to the wrong ports when
+ * called for the secondary channel, caching the current clock mode per-
+ * channel caused the cached register value to get out of sync with the
+ * actual one, the channels weren't serialized, the turnaround shouldn't
+ * be done on 66 MHz PCI bus
+ * - avoid calibrating PLL twice as the second time results in a wrong PCI
+ * frequency and thus in the wrong timings for the secondary channel
+ * - disable UltraATA/133 for HPT372 by default (50 MHz DPLL clock do not
+ * allow for this speed anyway)
+ * - add support for HPT302N and HPT371N clocking (the same as for HPT372N)
+ * - HPT371/N are single channel chips, so avoid touching the primary channel
+ * which exists only virtually (there's no pins for it)
+ * - fix/remove bad/unused timing tables and use one set of tables for the whole
+ * HPT37x chip family; save space by introducing the separate transfer mode
+ * table in which the mode lookup is done
+ * - use f_CNT value saved by the HighPoint BIOS as reading it directly gives
+ * the wrong PCI frequency since DPLL has already been calibrated by BIOS
+ * - fix the hotswap code: it caused RESET- to glitch when tristating the bus,
+ * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead
+ * - pass to init_chipset() handlers a copy of the IDE PCI device structure as
+ * they tamper with its fields
+ * <source@mvista.com>
+ *
*/
/* various tuning parameters */
#define HPT_RESET_STATE_ENGINE
-#undef HPT_DELAY_INTERRUPT
-#undef HPT_SERIALIZE_IO
+#undef HPT_DELAY_INTERRUPT
+#define HPT_SERIALIZE_IO 0
static const char *quirk_drives[] = {
"QUANTUM FIREBALLlct08 08",
NULL
};
-struct chipset_bus_clock_list_entry {
- u8 xfer_speed;
- unsigned int chipset_settings;
+static u8 xfer_speeds[] = {
+ XFER_UDMA_6,
+ XFER_UDMA_5,
+ XFER_UDMA_4,
+ XFER_UDMA_3,
+ XFER_UDMA_2,
+ XFER_UDMA_1,
+ XFER_UDMA_0,
+
+ XFER_MW_DMA_2,
+ XFER_MW_DMA_1,
+ XFER_MW_DMA_0,
+
+ XFER_PIO_4,
+ XFER_PIO_3,
+ XFER_PIO_2,
+ XFER_PIO_1,
+ XFER_PIO_0
};
-/* key for bus clock timings
- * bit
- * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
- * DMA. cycles = value + 1
- * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW
- * DMA. cycles = value + 1
- * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file
- * register access.
- * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file
- * register access.
- * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer.
- * during task file register access.
- * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA
- * xfer.
- * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task
- * register access.
- * 28 UDMA enable
- * 29 DMA enable
- * 30 PIO_MST enable. if set, the chip is in bus master mode during
- * PIO.
- * 31 FIFO enable.
+/* Key for bus clock timings
+ * 36x 37x
+ * bits bits
+ * 0:3 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 4:7 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
+ * cycles = value + 1
+ * 8:11 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
+ * register access.
+ * 12:15 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file
+ * register access.
+ * 16:18 18:20 udma_cycle_time. Clock cycles for UDMA xfer.
+ * - 21 CLK frequency: 0=ATA clock, 1=dual ATA clock.
+ * 19:21 22:24 pre_high_time. Time to initialize the 1st cycle for PIO and
+ * MW DMA xfer.
+ * 22:24 25:27 cmd_pre_high_time. Time to initialize the 1st PIO cycle for
+ * task file register access.
+ * 28 28 UDMA enable.
+ * 29 29 DMA enable.
+ * 30 30 PIO MST enable. If set, the chip is in bus master mode during
+ * PIO xfer.
+ * 31 31 FIFO enable.
*/
-static struct chipset_bus_clock_list_entry forty_base_hpt366[] = {
- { XFER_UDMA_4, 0x900fd943 },
- { XFER_UDMA_3, 0x900ad943 },
- { XFER_UDMA_2, 0x900bd943 },
- { XFER_UDMA_1, 0x9008d943 },
- { XFER_UDMA_0, 0x9008d943 },
-
- { XFER_MW_DMA_2, 0xa008d943 },
- { XFER_MW_DMA_1, 0xa010d955 },
- { XFER_MW_DMA_0, 0xa010d9fc },
-
- { XFER_PIO_4, 0xc008d963 },
- { XFER_PIO_3, 0xc010d974 },
- { XFER_PIO_2, 0xc010d997 },
- { XFER_PIO_1, 0xc010d9c7 },
- { XFER_PIO_0, 0xc018d9d9 },
- { 0, 0x0120d9d9 }
-};
-
-static struct chipset_bus_clock_list_entry thirty_three_base_hpt366[] = {
- { XFER_UDMA_4, 0x90c9a731 },
- { XFER_UDMA_3, 0x90cfa731 },
- { XFER_UDMA_2, 0x90caa731 },
- { XFER_UDMA_1, 0x90cba731 },
- { XFER_UDMA_0, 0x90c8a731 },
-
- { XFER_MW_DMA_2, 0xa0c8a731 },
- { XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */
- { XFER_MW_DMA_0, 0xa0c8a797 },
-
- { XFER_PIO_4, 0xc0c8a731 },
- { XFER_PIO_3, 0xc0c8a742 },
- { XFER_PIO_2, 0xc0d0a753 },
- { XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */
- { XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */
- { 0, 0x0120a7a7 }
-};
-
-static struct chipset_bus_clock_list_entry twenty_five_base_hpt366[] = {
- { XFER_UDMA_4, 0x90c98521 },
- { XFER_UDMA_3, 0x90cf8521 },
- { XFER_UDMA_2, 0x90cf8521 },
- { XFER_UDMA_1, 0x90cb8521 },
- { XFER_UDMA_0, 0x90cb8521 },
-
- { XFER_MW_DMA_2, 0xa0ca8521 },
- { XFER_MW_DMA_1, 0xa0ca8532 },
- { XFER_MW_DMA_0, 0xa0ca8575 },
-
- { XFER_PIO_4, 0xc0ca8521 },
- { XFER_PIO_3, 0xc0ca8532 },
- { XFER_PIO_2, 0xc0ca8542 },
- { XFER_PIO_1, 0xc0d08572 },
- { XFER_PIO_0, 0xc0d08585 },
- { 0, 0x01208585 }
-};
-
-/* from highpoint documentation. these are old values */
-static struct chipset_bus_clock_list_entry thirty_three_base_hpt370[] = {
-/* { XFER_UDMA_5, 0x1A85F442, 0x16454e31 }, */
- { XFER_UDMA_5, 0x16454e31 },
- { XFER_UDMA_4, 0x16454e31 },
- { XFER_UDMA_3, 0x166d4e31 },
- { XFER_UDMA_2, 0x16494e31 },
- { XFER_UDMA_1, 0x164d4e31 },
- { XFER_UDMA_0, 0x16514e31 },
-
- { XFER_MW_DMA_2, 0x26514e21 },
- { XFER_MW_DMA_1, 0x26514e33 },
- { XFER_MW_DMA_0, 0x26514e97 },
-
- { XFER_PIO_4, 0x06514e21 },
- { XFER_PIO_3, 0x06514e22 },
- { XFER_PIO_2, 0x06514e33 },
- { XFER_PIO_1, 0x06914e43 },
- { XFER_PIO_0, 0x06914e57 },
- { 0, 0x06514e57 }
-};
-
-static struct chipset_bus_clock_list_entry sixty_six_base_hpt370[] = {
- { XFER_UDMA_5, 0x14846231 },
- { XFER_UDMA_4, 0x14886231 },
- { XFER_UDMA_3, 0x148c6231 },
- { XFER_UDMA_2, 0x148c6231 },
- { XFER_UDMA_1, 0x14906231 },
- { XFER_UDMA_0, 0x14986231 },
-
- { XFER_MW_DMA_2, 0x26514e21 },
- { XFER_MW_DMA_1, 0x26514e33 },
- { XFER_MW_DMA_0, 0x26514e97 },
-
- { XFER_PIO_4, 0x06514e21 },
- { XFER_PIO_3, 0x06514e22 },
- { XFER_PIO_2, 0x06514e33 },
- { XFER_PIO_1, 0x06914e43 },
- { XFER_PIO_0, 0x06914e57 },
- { 0, 0x06514e57 }
-};
-
-/* these are the current (4 sep 2001) timings from highpoint */
-static struct chipset_bus_clock_list_entry thirty_three_base_hpt370a[] = {
- { XFER_UDMA_5, 0x12446231 },
- { XFER_UDMA_4, 0x12446231 },
- { XFER_UDMA_3, 0x126c6231 },
- { XFER_UDMA_2, 0x12486231 },
- { XFER_UDMA_1, 0x124c6233 },
- { XFER_UDMA_0, 0x12506297 },
-
- { XFER_MW_DMA_2, 0x22406c31 },
- { XFER_MW_DMA_1, 0x22406c33 },
- { XFER_MW_DMA_0, 0x22406c97 },
-
- { XFER_PIO_4, 0x06414e31 },
- { XFER_PIO_3, 0x06414e42 },
- { XFER_PIO_2, 0x06414e53 },
- { XFER_PIO_1, 0x06814e93 },
- { XFER_PIO_0, 0x06814ea7 },
- { 0, 0x06814ea7 }
-};
-
-/* 2x 33MHz timings */
-static struct chipset_bus_clock_list_entry sixty_six_base_hpt370a[] = {
- { XFER_UDMA_5, 0x1488e673 },
- { XFER_UDMA_4, 0x1488e673 },
- { XFER_UDMA_3, 0x1498e673 },
- { XFER_UDMA_2, 0x1490e673 },
- { XFER_UDMA_1, 0x1498e677 },
- { XFER_UDMA_0, 0x14a0e73f },
-
- { XFER_MW_DMA_2, 0x2480fa73 },
- { XFER_MW_DMA_1, 0x2480fa77 },
- { XFER_MW_DMA_0, 0x2480fb3f },
-
- { XFER_PIO_4, 0x0c82be73 },
- { XFER_PIO_3, 0x0c82be95 },
- { XFER_PIO_2, 0x0c82beb7 },
- { XFER_PIO_1, 0x0d02bf37 },
- { XFER_PIO_0, 0x0d02bf5f },
- { 0, 0x0d02bf5f }
-};
-static struct chipset_bus_clock_list_entry fifty_base_hpt370a[] = {
- { XFER_UDMA_5, 0x12848242 },
- { XFER_UDMA_4, 0x12ac8242 },
- { XFER_UDMA_3, 0x128c8242 },
- { XFER_UDMA_2, 0x120c8242 },
- { XFER_UDMA_1, 0x12148254 },
- { XFER_UDMA_0, 0x121882ea },
-
- { XFER_MW_DMA_2, 0x22808242 },
- { XFER_MW_DMA_1, 0x22808254 },
- { XFER_MW_DMA_0, 0x228082ea },
-
- { XFER_PIO_4, 0x0a81f442 },
- { XFER_PIO_3, 0x0a81f443 },
- { XFER_PIO_2, 0x0a81f454 },
- { XFER_PIO_1, 0x0ac1f465 },
- { XFER_PIO_0, 0x0ac1f48a },
- { 0, 0x0ac1f48a }
+static u32 forty_base_hpt36x[] = {
+ /* XFER_UDMA_6 */ 0x900fd943,
+ /* XFER_UDMA_5 */ 0x900fd943,
+ /* XFER_UDMA_4 */ 0x900fd943,
+ /* XFER_UDMA_3 */ 0x900ad943,
+ /* XFER_UDMA_2 */ 0x900bd943,
+ /* XFER_UDMA_1 */ 0x9008d943,
+ /* XFER_UDMA_0 */ 0x9008d943,
+
+ /* XFER_MW_DMA_2 */ 0xa008d943,
+ /* XFER_MW_DMA_1 */ 0xa010d955,
+ /* XFER_MW_DMA_0 */ 0xa010d9fc,
+
+ /* XFER_PIO_4 */ 0xc008d963,
+ /* XFER_PIO_3 */ 0xc010d974,
+ /* XFER_PIO_2 */ 0xc010d997,
+ /* XFER_PIO_1 */ 0xc010d9c7,
+ /* XFER_PIO_0 */ 0xc018d9d9
};
-static struct chipset_bus_clock_list_entry thirty_three_base_hpt372[] = {
- { XFER_UDMA_6, 0x1c81dc62 },
- { XFER_UDMA_5, 0x1c6ddc62 },
- { XFER_UDMA_4, 0x1c8ddc62 },
- { XFER_UDMA_3, 0x1c8edc62 }, /* checkme */
- { XFER_UDMA_2, 0x1c91dc62 },
- { XFER_UDMA_1, 0x1c9adc62 }, /* checkme */
- { XFER_UDMA_0, 0x1c82dc62 }, /* checkme */
-
- { XFER_MW_DMA_2, 0x2c829262 },
- { XFER_MW_DMA_1, 0x2c829266 }, /* checkme */
- { XFER_MW_DMA_0, 0x2c82922e }, /* checkme */
-
- { XFER_PIO_4, 0x0c829c62 },
- { XFER_PIO_3, 0x0c829c84 },
- { XFER_PIO_2, 0x0c829ca6 },
- { XFER_PIO_1, 0x0d029d26 },
- { XFER_PIO_0, 0x0d029d5e },
- { 0, 0x0d029d5e }
+static u32 thirty_three_base_hpt36x[] = {
+ /* XFER_UDMA_6 */ 0x90c9a731,
+ /* XFER_UDMA_5 */ 0x90c9a731,
+ /* XFER_UDMA_4 */ 0x90c9a731,
+ /* XFER_UDMA_3 */ 0x90cfa731,
+ /* XFER_UDMA_2 */ 0x90caa731,
+ /* XFER_UDMA_1 */ 0x90cba731,
+ /* XFER_UDMA_0 */ 0x90c8a731,
+
+ /* XFER_MW_DMA_2 */ 0xa0c8a731,
+ /* XFER_MW_DMA_1 */ 0xa0c8a732, /* 0xa0c8a733 */
+ /* XFER_MW_DMA_0 */ 0xa0c8a797,
+
+ /* XFER_PIO_4 */ 0xc0c8a731,
+ /* XFER_PIO_3 */ 0xc0c8a742,
+ /* XFER_PIO_2 */ 0xc0d0a753,
+ /* XFER_PIO_1 */ 0xc0d0a7a3, /* 0xc0d0a793 */
+ /* XFER_PIO_0 */ 0xc0d0a7aa /* 0xc0d0a7a7 */
};
-static struct chipset_bus_clock_list_entry fifty_base_hpt372[] = {
- { XFER_UDMA_5, 0x12848242 },
- { XFER_UDMA_4, 0x12ac8242 },
- { XFER_UDMA_3, 0x128c8242 },
- { XFER_UDMA_2, 0x120c8242 },
- { XFER_UDMA_1, 0x12148254 },
- { XFER_UDMA_0, 0x121882ea },
-
- { XFER_MW_DMA_2, 0x22808242 },
- { XFER_MW_DMA_1, 0x22808254 },
- { XFER_MW_DMA_0, 0x228082ea },
-
- { XFER_PIO_4, 0x0a81f442 },
- { XFER_PIO_3, 0x0a81f443 },
- { XFER_PIO_2, 0x0a81f454 },
- { XFER_PIO_1, 0x0ac1f465 },
- { XFER_PIO_0, 0x0ac1f48a },
- { 0, 0x0a81f443 }
+static u32 twenty_five_base_hpt36x[] = {
+ /* XFER_UDMA_6 */ 0x90c98521,
+ /* XFER_UDMA_5 */ 0x90c98521,
+ /* XFER_UDMA_4 */ 0x90c98521,
+ /* XFER_UDMA_3 */ 0x90cf8521,
+ /* XFER_UDMA_2 */ 0x90cf8521,
+ /* XFER_UDMA_1 */ 0x90cb8521,
+ /* XFER_UDMA_0 */ 0x90cb8521,
+
+ /* XFER_MW_DMA_2 */ 0xa0ca8521,
+ /* XFER_MW_DMA_1 */ 0xa0ca8532,
+ /* XFER_MW_DMA_0 */ 0xa0ca8575,
+
+ /* XFER_PIO_4 */ 0xc0ca8521,
+ /* XFER_PIO_3 */ 0xc0ca8532,
+ /* XFER_PIO_2 */ 0xc0ca8542,
+ /* XFER_PIO_1 */ 0xc0d08572,
+ /* XFER_PIO_0 */ 0xc0d08585
};
-static struct chipset_bus_clock_list_entry sixty_six_base_hpt372[] = {
- { XFER_UDMA_6, 0x1c869c62 },
- { XFER_UDMA_5, 0x1cae9c62 },
- { XFER_UDMA_4, 0x1c8a9c62 },
- { XFER_UDMA_3, 0x1c8e9c62 },
- { XFER_UDMA_2, 0x1c929c62 },
- { XFER_UDMA_1, 0x1c9a9c62 },
- { XFER_UDMA_0, 0x1c829c62 },
-
- { XFER_MW_DMA_2, 0x2c829c62 },
- { XFER_MW_DMA_1, 0x2c829c66 },
- { XFER_MW_DMA_0, 0x2c829d2e },
-
- { XFER_PIO_4, 0x0c829c62 },
- { XFER_PIO_3, 0x0c829c84 },
- { XFER_PIO_2, 0x0c829ca6 },
- { XFER_PIO_1, 0x0d029d26 },
- { XFER_PIO_0, 0x0d029d5e },
- { 0, 0x0d029d26 }
+static u32 thirty_three_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
+ /* XFER_UDMA_5 */ 0x12446231,
+ /* XFER_UDMA_4 */ 0x12446231,
+ /* XFER_UDMA_3 */ 0x126c6231,
+ /* XFER_UDMA_2 */ 0x12486231,
+ /* XFER_UDMA_1 */ 0x124c6233,
+ /* XFER_UDMA_0 */ 0x12506297,
+
+ /* XFER_MW_DMA_2 */ 0x22406c31,
+ /* XFER_MW_DMA_1 */ 0x22406c33,
+ /* XFER_MW_DMA_0 */ 0x22406c97,
+
+ /* XFER_PIO_4 */ 0x06414e31,
+ /* XFER_PIO_3 */ 0x06414e42,
+ /* XFER_PIO_2 */ 0x06414e53,
+ /* XFER_PIO_1 */ 0x06814e93,
+ /* XFER_PIO_0 */ 0x06814ea7
};
-static struct chipset_bus_clock_list_entry thirty_three_base_hpt374[] = {
- { XFER_UDMA_6, 0x12808242 },
- { XFER_UDMA_5, 0x12848242 },
- { XFER_UDMA_4, 0x12ac8242 },
- { XFER_UDMA_3, 0x128c8242 },
- { XFER_UDMA_2, 0x120c8242 },
- { XFER_UDMA_1, 0x12148254 },
- { XFER_UDMA_0, 0x121882ea },
-
- { XFER_MW_DMA_2, 0x22808242 },
- { XFER_MW_DMA_1, 0x22808254 },
- { XFER_MW_DMA_0, 0x228082ea },
-
- { XFER_PIO_4, 0x0a81f442 },
- { XFER_PIO_3, 0x0a81f443 },
- { XFER_PIO_2, 0x0a81f454 },
- { XFER_PIO_1, 0x0ac1f465 },
- { XFER_PIO_0, 0x0ac1f48a },
- { 0, 0x06814e93 }
+static u32 fifty_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x12848242,
+ /* XFER_UDMA_5 */ 0x12848242,
+ /* XFER_UDMA_4 */ 0x12ac8242,
+ /* XFER_UDMA_3 */ 0x128c8242,
+ /* XFER_UDMA_2 */ 0x120c8242,
+ /* XFER_UDMA_1 */ 0x12148254,
+ /* XFER_UDMA_0 */ 0x121882ea,
+
+ /* XFER_MW_DMA_2 */ 0x22808242,
+ /* XFER_MW_DMA_1 */ 0x22808254,
+ /* XFER_MW_DMA_0 */ 0x228082ea,
+
+ /* XFER_PIO_4 */ 0x0a81f442,
+ /* XFER_PIO_3 */ 0x0a81f443,
+ /* XFER_PIO_2 */ 0x0a81f454,
+ /* XFER_PIO_1 */ 0x0ac1f465,
+ /* XFER_PIO_0 */ 0x0ac1f48a
};
-/* FIXME: 50MHz timings for HPT374 */
-
-#if 0
-static struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = {
- { XFER_UDMA_6, 0x12406231 }, /* checkme */
- { XFER_UDMA_5, 0x12446231 }, /* 0x14846231 */
- { XFER_UDMA_4, 0x16814ea7 }, /* 0x14886231 */
- { XFER_UDMA_3, 0x16814ea7 }, /* 0x148c6231 */
- { XFER_UDMA_2, 0x16814ea7 }, /* 0x148c6231 */
- { XFER_UDMA_1, 0x16814ea7 }, /* 0x14906231 */
- { XFER_UDMA_0, 0x16814ea7 }, /* 0x14986231 */
- { XFER_MW_DMA_2, 0x16814ea7 }, /* 0x26514e21 */
- { XFER_MW_DMA_1, 0x16814ea7 }, /* 0x26514e97 */
- { XFER_MW_DMA_0, 0x16814ea7 }, /* 0x26514e97 */
- { XFER_PIO_4, 0x06814ea7 }, /* 0x06514e21 */
- { XFER_PIO_3, 0x06814ea7 }, /* 0x06514e22 */
- { XFER_PIO_2, 0x06814ea7 }, /* 0x06514e33 */
- { XFER_PIO_1, 0x06814ea7 }, /* 0x06914e43 */
- { XFER_PIO_0, 0x06814ea7 }, /* 0x06914e57 */
- { 0, 0x06814ea7 }
+static u32 sixty_six_base_hpt37x[] = {
+ /* XFER_UDMA_6 */ 0x1c869c62,
+ /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */
+ /* XFER_UDMA_4 */ 0x1c8a9c62,
+ /* XFER_UDMA_3 */ 0x1c8e9c62,
+ /* XFER_UDMA_2 */ 0x1c929c62,
+ /* XFER_UDMA_1 */ 0x1c9a9c62,
+ /* XFER_UDMA_0 */ 0x1c829c62,
+
+ /* XFER_MW_DMA_2 */ 0x2c829c62,
+ /* XFER_MW_DMA_1 */ 0x2c829c66,
+ /* XFER_MW_DMA_0 */ 0x2c829d2e,
+
+ /* XFER_PIO_4 */ 0x0c829c62,
+ /* XFER_PIO_3 */ 0x0c829c84,
+ /* XFER_PIO_2 */ 0x0c829ca6,
+ /* XFER_PIO_1 */ 0x0d029d26,
+ /* XFER_PIO_0 */ 0x0d029d5e
};
-#endif
#define HPT366_DEBUG_DRIVE_INFO 0
#define HPT374_ALLOW_ATA133_6 0
#define HPT371_ALLOW_ATA133_6 0
#define HPT302_ALLOW_ATA133_6 0
-#define HPT372_ALLOW_ATA133_6 1
+#define HPT372_ALLOW_ATA133_6 0
#define HPT370_ALLOW_ATA100_5 1
#define HPT366_ALLOW_ATA66_4 1
#define HPT366_ALLOW_ATA66_3 1
int revision; /* Chipset revision */
int flags; /* Chipset properties */
#define PLL_MODE 1
-#define IS_372N 2
+#define IS_3xxN 2
+#define PCI_66MHZ 4
/* Speed table */
- struct chipset_bus_clock_list_entry *speed;
+ u32 *speed;
};
/*
return 0;
}
-static unsigned int pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
+static u32 pci_bus_clock_list(u8 speed, u32 *chipset_table)
{
- for ( ; chipset_table->xfer_speed ; chipset_table++)
- if (chipset_table->xfer_speed == speed)
- return chipset_table->chipset_settings;
- return chipset_table->chipset_settings;
+ int i;
+
+ /*
+ * Lookup the transfer mode table to get the index into
+ * the timing table.
+ *
+ * NOTE: For XFER_PIO_SLOW, PIO mode 0 timings will be used.
+ */
+ for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++)
+ if (xfer_speeds[i] == speed)
+ break;
+ return chipset_table[i];
}
static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
}
/**
- * hpt372n_set_clock - perform clock switching dance
- * @drive: Drive to switch
- * @mode: Switching mode (0x21 for write, 0x23 otherwise)
+ * hpt3xxn_set_clock - perform clock switching dance
+ * @hwif: hwif to switch
+ * @mode: clocking mode (0x21 for write, 0x23 otherwise)
*
- * Switch the DPLL clock on the HPT372N devices. This is a
- * right mess.
+ * Switch the DPLL clock on the HPT3xxN devices. This is a right mess.
+ * NOTE: avoid touching the disabled primary channel on HPT371N -- it
+ * doesn't physically exist anyway...
*/
-
-static void hpt372n_set_clock(ide_drive_t *drive, int mode)
+
+static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
{
- ide_hwif_t *hwif = HWIF(drive);
-
- /* FIXME: should we check for DMA active and BUG() */
+ u8 mcr1, scr2 = hwif->INB(hwif->dma_master + 0x7b);
+
+ if ((scr2 & 0x7f) == mode)
+ return;
+
+ /* MISC. control register 1 has the channel enable bit... */
+ mcr1 = hwif->INB(hwif->dma_master + 0x70);
+
/* Tristate the bus */
- outb(0x80, hwif->dma_base+0x73);
- outb(0x80, hwif->dma_base+0x77);
-
+ if (mcr1 & 0x04)
+ hwif->OUTB(0x80, hwif->dma_master + 0x73);
+ hwif->OUTB(0x80, hwif->dma_master + 0x77);
+
/* Switch clock and reset channels */
- outb(mode, hwif->dma_base+0x7B);
- outb(0xC0, hwif->dma_base+0x79);
-
+ hwif->OUTB(mode, hwif->dma_master + 0x7b);
+ hwif->OUTB(0xc0, hwif->dma_master + 0x79);
+
/* Reset state machines */
- outb(0x37, hwif->dma_base+0x70);
- outb(0x37, hwif->dma_base+0x74);
-
+ if (mcr1 & 0x04)
+ hwif->OUTB(0x37, hwif->dma_master + 0x70);
+ hwif->OUTB(0x37, hwif->dma_master + 0x74);
+
/* Complete reset */
- outb(0x00, hwif->dma_base+0x79);
-
+ hwif->OUTB(0x00, hwif->dma_master + 0x79);
+
/* Reconnect channels to bus */
- outb(0x00, hwif->dma_base+0x73);
- outb(0x00, hwif->dma_base+0x77);
+ if (mcr1 & 0x04)
+ hwif->OUTB(0x00, hwif->dma_master + 0x73);
+ hwif->OUTB(0x00, hwif->dma_master + 0x77);
}
/**
- * hpt372n_rw_disk - prepare for I/O
+ * hpt3xxn_rw_disk - prepare for I/O
* @drive: drive for command
* @rq: block request structure
*
- * This is called when a disk I/O is issued to the 372N.
+ * This is called when a disk I/O is issued to HPT3xxN.
* We need it because of the clock switching.
*/
-static void hpt372n_rw_disk(ide_drive_t *drive, struct request *rq)
-{
- ide_hwif_t *hwif = drive->hwif;
- int wantclock;
-
- wantclock = rq_data_dir(rq) ? 0x23 : 0x21;
-
- if (hwif->config_data != wantclock) {
- hpt372n_set_clock(drive, wantclock);
- hwif->config_data = wantclock;
- }
-}
-
-/*
- * Since SUN Cobalt is attempting to do this operation, I should disclose
- * this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date
- * HOTSWAP ATA Infrastructure.
- */
-
-static void hpt3xx_reset (ide_drive_t *drive)
-{
-}
-
-static int hpt3xx_tristate (ide_drive_t * drive, int state)
+static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- u8 reg59h = 0, reset = (hwif->channel) ? 0x80 : 0x40;
- u8 regXXh = 0, state_reg= (hwif->channel) ? 0x57 : 0x53;
-
- pci_read_config_byte(dev, 0x59, ®59h);
- pci_read_config_byte(dev, state_reg, ®XXh);
+ u8 wantclock = rq_data_dir(rq) ? 0x23 : 0x21;
- if (state) {
- (void) ide_do_reset(drive);
- pci_write_config_byte(dev, state_reg, regXXh|0x80);
- pci_write_config_byte(dev, 0x59, reg59h|reset);
- } else {
- pci_write_config_byte(dev, 0x59, reg59h & ~(reset));
- pci_write_config_byte(dev, state_reg, regXXh & ~(0x80));
- (void) ide_do_reset(drive);
- }
- return 0;
+ hpt3xxn_set_clock(hwif, wantclock);
}
/*
- * set/get power state for a drive.
- * turning the power off does the following things:
- * 1) soft-reset the drive
- * 2) tri-states the ide bus
+ * Set/get power state for a drive.
*
- * when we turn things back on, we need to re-initialize things.
+ * When we turn the power back on, we need to re-initialize things.
*/
#define TRISTATE_BIT 0x8000
-static int hpt370_busproc(ide_drive_t * drive, int state)
+
+static int hpt3xx_busproc(ide_drive_t *drive, int state)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = hwif->pci_dev;
- u8 tristate = 0, resetmask = 0, bus_reg = 0;
- u16 tri_reg;
+ u8 tristate, resetmask, bus_reg = 0;
+ u16 tri_reg = 0;
hwif->bus_state = state;
if (hwif->channel) {
/* secondary channel */
- tristate = 0x56;
- resetmask = 0x80;
+ tristate = 0x56;
+ resetmask = 0x80;
} else {
/* primary channel */
- tristate = 0x52;
+ tristate = 0x52;
resetmask = 0x40;
}
- /* grab status */
+ /* Grab the status. */
pci_read_config_word(dev, tristate, &tri_reg);
pci_read_config_byte(dev, 0x59, &bus_reg);
- /* set the state. we don't set it if we don't need to do so.
- * make sure that the drive knows that it has failed if it's off */
+ /*
+ * Set the state. We don't set it if we don't need to do so.
+ * Make sure that the drive knows that it has failed if it's off.
+ */
switch (state) {
case BUSSTATE_ON:
- hwif->drives[0].failures = 0;
- hwif->drives[1].failures = 0;
- if ((bus_reg & resetmask) == 0)
+ if (!(bus_reg & resetmask))
return 0;
- tri_reg &= ~TRISTATE_BIT;
- bus_reg &= ~resetmask;
- break;
+ hwif->drives[0].failures = hwif->drives[1].failures = 0;
+
+ pci_write_config_byte(dev, 0x59, bus_reg & ~resetmask);
+ pci_write_config_word(dev, tristate, tri_reg & ~TRISTATE_BIT);
+ return 0;
case BUSSTATE_OFF:
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- if ((tri_reg & TRISTATE_BIT) == 0 && (bus_reg & resetmask))
+ if ((bus_reg & resetmask) && !(tri_reg & TRISTATE_BIT))
return 0;
tri_reg &= ~TRISTATE_BIT;
- bus_reg |= resetmask;
break;
case BUSSTATE_TRISTATE:
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- if ((tri_reg & TRISTATE_BIT) && (bus_reg & resetmask))
+ if ((bus_reg & resetmask) && (tri_reg & TRISTATE_BIT))
return 0;
tri_reg |= TRISTATE_BIT;
- bus_reg |= resetmask;
break;
+ default:
+ return -EINVAL;
}
- pci_write_config_byte(dev, 0x59, bus_reg);
- pci_write_config_word(dev, tristate, tri_reg);
+ hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
+ hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
+
+ pci_write_config_word(dev, tristate, tri_reg);
+ pci_write_config_byte(dev, 0x59, bus_reg | resetmask);
return 0;
}
/* detect bus speed by looking at control reg timing: */
switch((reg1 >> 8) & 7) {
case 5:
- info->speed = forty_base_hpt366;
+ info->speed = forty_base_hpt36x;
break;
case 9:
- info->speed = twenty_five_base_hpt366;
+ info->speed = twenty_five_base_hpt36x;
break;
case 7:
default:
- info->speed = thirty_three_base_hpt366;
+ info->speed = thirty_three_base_hpt36x;
break;
}
}
struct hpt_info *info = ide_get_hwifdata(hwif);
struct pci_dev *dev = hwif->pci_dev;
int adjust, i;
- u16 freq;
- u32 pll;
- u8 reg5bh;
+ u16 freq = 0;
+ u32 pll, temp = 0;
+ u8 reg5bh = 0, mcr1 = 0;
/*
* default to pci clock. make sure MA15/16 are set to output
pci_write_config_byte(dev, 0x5b, 0x23);
/*
- * set up the PLL. we need to adjust it so that it's stable.
- * freq = Tpll * 192 / Tpci
+ * We'll have to read f_CNT value in order to determine
+ * the PCI clock frequency according to the following ratio:
+ *
+ * f_CNT = Fpci * 192 / Fdpll
+ *
+ * First try reading the register in which the HighPoint BIOS
+ * saves f_CNT value before reprogramming the DPLL from its
+ * default setting (which differs for the various chips).
+ * NOTE: This register is only accessible via I/O space.
*
- * Todo. For non x86 should probably check the dword is
- * set to 0xABCDExxx indicating the BIOS saved f_CNT
+ * In case the signature check fails, we'll have to resort to
+ * reading the f_CNT register itself in hopes that nobody has
+ * touched the DPLL yet...
*/
- pci_read_config_word(dev, 0x78, &freq);
- freq &= 0x1FF;
-
+ temp = inl(pci_resource_start(dev, 4) + 0x90);
+ if ((temp & 0xFFFFF000) != 0xABCDE000) {
+ printk(KERN_WARNING "HPT37X: no clock data saved by BIOS\n");
+
+ /* Calculate the average value of f_CNT */
+ for (temp = i = 0; i < 128; i++) {
+ pci_read_config_word(dev, 0x78, &freq);
+ temp += freq & 0x1ff;
+ mdelay(1);
+ }
+ freq = temp / 128;
+ } else
+ freq = temp & 0x1ff;
+
/*
- * The 372N uses different PCI clock information and has
- * some other complications
- * On PCI33 timing we must clock switch
- * On PCI66 timing we must NOT use the PCI clock
- *
- * Currently we always set up the PLL for the 372N
+ * HPT3xxN chips use different PCI clock information.
+ * Currently we always set up the PLL for them.
*/
-
- if(info->flags & IS_372N)
- {
- printk(KERN_INFO "hpt: HPT372N detected, using 372N timing.\n");
+
+ if (info->flags & IS_3xxN) {
if(freq < 0x55)
pll = F_LOW_PCI_33;
else if(freq < 0x70)
pll = F_LOW_PCI_50;
else
pll = F_LOW_PCI_66;
-
- printk(KERN_INFO "FREQ: %d PLL: %d\n", freq, pll);
-
- /* We always use the pll not the PCI clock on 372N */
+
+ printk(KERN_INFO "HPT3xxN detected, FREQ: %d, PLL: %d\n", freq, pll);
}
else
{
pll = F_LOW_PCI_66;
if (pll == F_LOW_PCI_33) {
- if (info->revision >= 8)
- info->speed = thirty_three_base_hpt374;
- else if (info->revision >= 5)
- info->speed = thirty_three_base_hpt372;
- else if (info->revision >= 4)
- info->speed = thirty_three_base_hpt370a;
- else
- info->speed = thirty_three_base_hpt370;
+ info->speed = thirty_three_base_hpt37x;
printk(KERN_DEBUG "HPT37X: using 33MHz PCI clock\n");
} else if (pll == F_LOW_PCI_40) {
/* Unsupported */
} else if (pll == F_LOW_PCI_50) {
- if (info->revision >= 8)
- info->speed = fifty_base_hpt370a;
- else if (info->revision >= 5)
- info->speed = fifty_base_hpt372;
- else if (info->revision >= 4)
- info->speed = fifty_base_hpt370a;
- else
- info->speed = fifty_base_hpt370a;
+ info->speed = fifty_base_hpt37x;
printk(KERN_DEBUG "HPT37X: using 50MHz PCI clock\n");
} else {
- if (info->revision >= 8) {
- printk(KERN_ERR "HPT37x: 66MHz timings are not supported.\n");
- }
- else if (info->revision >= 5)
- info->speed = sixty_six_base_hpt372;
- else if (info->revision >= 4)
- info->speed = sixty_six_base_hpt370a;
- else
- info->speed = sixty_six_base_hpt370;
+ info->speed = sixty_six_base_hpt37x;
printk(KERN_DEBUG "HPT37X: using 66MHz PCI clock\n");
}
}
-
+
+ if (pll == F_LOW_PCI_66)
+ info->flags |= PCI_66MHZ;
+
/*
* only try the pll if we don't have a table for the clock
* speed that we're running at. NOTE: the internal PLL will
info->flags |= PLL_MODE;
/*
- * FIXME: make this work correctly, esp with 372N as per
- * reference driver code.
- *
- * adjust PLL based upon PCI clock, enable it, and wait for
- * stabilization.
+ * Adjust the PLL based upon the PCI clock, enable it, and
+ * wait for stabilization...
*/
adjust = 0;
freq = (pll < F_LOW_PCI_50) ? 2 : 4;
pci_write_config_dword(dev, 0x5c,
pll & ~0x100);
pci_write_config_byte(dev, 0x5b, 0x21);
- if (info->revision >= 8)
- info->speed = fifty_base_hpt370a;
- else if (info->revision >= 5)
- info->speed = fifty_base_hpt372;
- else if (info->revision >= 4)
- info->speed = fifty_base_hpt370a;
- else
- info->speed = fifty_base_hpt370a;
+
+ info->speed = fifty_base_hpt37x;
printk("HPT37X: using 50MHz internal PLL\n");
goto init_hpt37X_done;
}
}
- if (!pci_get_drvdata(dev)) {
- printk("No Clock Stabilization!!!\n");
- return;
- }
pll_recal:
if (adjust & 1)
pll -= (adjust >> 1);
init_hpt37X_done:
if (!info->speed)
- printk(KERN_ERR "HPT37X%s: unknown bus timing [%d %d].\n",
- (info->flags & IS_372N)?"N":"", pll, freq);
- /* reset state engine */
- pci_write_config_byte(dev, 0x50, 0x37);
- pci_write_config_byte(dev, 0x54, 0x37);
+ printk(KERN_ERR "HPT37x%s: unknown bus timing [%d %d].\n",
+ (info->flags & IS_3xxN) ? "N" : "", pll, freq);
+ /*
+ * Reset the state engines.
+ * NOTE: avoid accidentally enabling the primary channel on HPT371N.
+ */
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ if (mcr1 & 0x04)
+ pci_write_config_byte(dev, 0x50, 0x37);
+ pci_write_config_byte(dev, 0x54, 0x37);
udelay(100);
}
struct pci_dev *dev = hwif->pci_dev;
struct hpt_info *info = ide_get_hwifdata(hwif);
u8 ata66 = 0, regmask = (hwif->channel) ? 0x01 : 0x02;
+ int serialize = HPT_SERIALIZE_IO;
hwif->tuneproc = &hpt3xx_tune_drive;
hwif->speedproc = &hpt3xx_tune_chipset;
hwif->intrproc = &hpt3xx_intrproc;
hwif->maskproc = &hpt3xx_maskproc;
- if(info->flags & IS_372N)
- hwif->rw_disk = &hpt372n_rw_disk;
+ /*
+ * HPT3xxN chips have some complications:
+ *
+ * - on 33 MHz PCI we must clock switch
+ * - on 66 MHz PCI we must NOT use the PCI clock
+ */
+ if ((info->flags & (IS_3xxN | PCI_66MHZ)) == IS_3xxN) {
+ /*
+ * Clock is shared between the channels,
+ * so we'll have to serialize them... :-(
+ */
+ serialize = 1;
+ hwif->rw_disk = &hpt3xxn_rw_disk;
+ }
/*
* The HPT37x uses the CBLID pins as outputs for MA15/MA16
PCI_FUNC(hwif->pci_dev->devfn));
#endif /* DEBUG */
-#ifdef HPT_SERIALIZE_IO
- /* serialize access to this device */
- if (hwif->mate)
+ /* Serialize access to this device */
+ if (serialize && hwif->mate)
hwif->serialized = hwif->mate->serialized = 1;
-#endif
- if (info->revision >= 3) {
- u8 reg5ah = 0;
- pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10);
- /*
- * set up ioctl for power status.
- * note: power affects both
- * drives on each channel
- */
- hwif->resetproc = &hpt3xx_reset;
- hwif->busproc = &hpt370_busproc;
- } else if (info->revision >= 2) {
- hwif->resetproc = &hpt3xx_reset;
- hwif->busproc = &hpt3xx_tristate;
- } else {
- hwif->resetproc = &hpt3xx_reset;
- hwif->busproc = &hpt3xx_tristate;
- }
+ /*
+ * Set up ioctl for power status.
+ * NOTE: power affects both drives on each channel.
+ */
+ hwif->busproc = &hpt3xx_busproc;
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1;
return;
if(info->speed == NULL) {
- printk(KERN_WARNING "hpt: no known IDE timings, disabling DMA.\n");
+ printk(KERN_WARNING "hpt366: no known IDE timings, disabling DMA.\n");
return;
}
static void __devinit init_iops_hpt366(ide_hwif_t *hwif)
{
- struct hpt_info *info = kzalloc(sizeof(struct hpt_info), GFP_KERNEL);
- unsigned long dmabase = pci_resource_start(hwif->pci_dev, 4);
- u8 did, rid;
+ struct hpt_info *info = kzalloc(sizeof(struct hpt_info), GFP_KERNEL);
+ struct pci_dev *dev = hwif->pci_dev;
+ u16 did = dev->device;
+ u8 rid = 0;
if(info == NULL) {
printk(KERN_WARNING "hpt366: out of memory.\n");
}
ide_set_hwifdata(hwif, info);
- if(dmabase) {
- did = inb(dmabase + 0x22);
- rid = inb(dmabase + 0x28);
-
- if((did == 4 && rid == 6) || (did == 5 && rid > 1))
- info->flags |= IS_372N;
+ /* Avoid doing the same thing twice. */
+ if (hwif->channel && hwif->mate) {
+ memcpy(info, ide_get_hwifdata(hwif->mate), sizeof(struct hpt_info));
+ return;
}
- info->revision = hpt_revision(hwif->pci_dev);
+ pci_read_config_byte(dev, PCI_CLASS_REVISION, &rid);
+
+ if (( did == PCI_DEVICE_ID_TTI_HPT366 && rid == 6) ||
+ ((did == PCI_DEVICE_ID_TTI_HPT372 ||
+ did == PCI_DEVICE_ID_TTI_HPT302 ||
+ did == PCI_DEVICE_ID_TTI_HPT371) && rid > 1) ||
+ did == PCI_DEVICE_ID_TTI_HPT372N)
+ info->flags |= IS_3xxN;
+
+ info->revision = hpt_revision(dev);
if (info->revision >= 3)
hpt37x_clocking(hwif);
return ide_setup_pci_device(dev, d);
}
+static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
+{
+ u8 mcr1 = 0;
+
+ /*
+ * HPT371 chips physically have only one channel, the secondary one,
+ * but the primary channel registers do exist! Go figure...
+ * So, we manually disable the non-existing channel here
+ * (if the BIOS hasn't done this already).
+ */
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ if (mcr1 & 0x04)
+ pci_write_config_byte(dev, 0x50, (mcr1 & ~0x04));
+
+ return ide_setup_pci_device(dev, d);
+}
+
static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
struct pci_dev *findev = NULL;
.bootable = OFF_BOARD,
},{ /* 3 */
.name = "HPT371",
- .init_setup = init_setup_hpt37x,
+ .init_setup = init_setup_hpt371,
.init_chipset = init_chipset_hpt366,
.init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.channels = 2,
.autodma = AUTODMA,
+ .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
},{ /* 4 */
.name = "HPT374",
*
* Called when the PCI registration layer (or the IDE initialization)
* finds a device matching our IDE device tables.
+ *
+ * NOTE: since we'll have to modify some fields of the ide_pci_device_t
+ * structure depending on the chip's revision, we'd better pass a local
+ * copy down the call chain...
*/
-
static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_pci_device_t *d = &hpt366_chipsets[id->driver_data];
+ ide_pci_device_t d = hpt366_chipsets[id->driver_data];
- return d->init_setup(dev, d);
+ return d.init_setup(dev, &d);
}
static struct pci_device_id hpt366_pci_tbl[] = {
* Split from:
* linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2005-2006 MontaVista Software, Inc.
* Portions Copyright (C) 1999 Promise Technology, Inc.
* Author: Frank Tiernan (frankt@promise.com)
* Released under terms of General Public License
#define PDC202_DEBUG_CABLE 0
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
static const char *pdc_quirk_drives[] = {
"QUANTUM FIREBALLlct08 08",
"QUANTUM FIREBALLP KA6.4",
NULL
};
-#define set_2regs(a, b) \
- do { \
- hwif->OUTB((a + adj), indexreg); \
- hwif->OUTB(b, datareg); \
- } while(0)
-
-#define set_ultra(a, b, c) \
- do { \
- set_2regs(0x10,(a)); \
- set_2regs(0x11,(b)); \
- set_2regs(0x12,(c)); \
- } while(0)
-
-#define set_ata2(a, b) \
- do { \
- set_2regs(0x0e,(a)); \
- set_2regs(0x0f,(b)); \
- } while(0)
-
-#define set_pio(a, b, c) \
- do { \
- set_2regs(0x0c,(a)); \
- set_2regs(0x0d,(b)); \
- set_2regs(0x13,(c)); \
- } while(0)
-
-static u8 pdcnew_ratemask (ide_drive_t *drive)
+static u8 max_dma_rate(struct pci_dev *pdev)
{
u8 mode;
- switch(HWIF(drive)->pci_dev->device) {
+ switch(pdev->device) {
case PCI_DEVICE_ID_PROMISE_20277:
case PCI_DEVICE_ID_PROMISE_20276:
case PCI_DEVICE_ID_PROMISE_20275:
default:
return 0;
}
- if (!eighty_ninty_three(drive))
- mode = min(mode, (u8)1);
+
return mode;
}
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
+static u8 pdcnew_ratemask(ide_drive_t *drive)
+{
+ u8 mode = max_dma_rate(HWIF(drive)->pci_dev);
+
+ if (!eighty_ninty_three(drive))
+ mode = min_t(u8, mode, 1);
+
+ return mode;
+}
+
+static int check_in_drive_lists(ide_drive_t *drive, const char **list)
{
struct hd_driveid *id = drive->id;
return 0;
}
-static int pdcnew_new_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+/**
+ * get_indexed_reg - Get indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
+{
+ u8 value;
+
+ hwif->OUTB(index, hwif->dma_vendor1);
+ value = hwif->INB(hwif->dma_vendor3);
+
+ DBG("index[%02X] value[%02X]\n", index, value);
+ return value;
+}
+
+/**
+ * set_indexed_reg - Set indexed register
+ * @hwif: for the port address
+ * @index: index of the indexed register
+ */
+static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
+{
+ hwif->OUTB(index, hwif->dma_vendor1);
+ hwif->OUTB(value, hwif->dma_vendor3);
+ DBG("index[%02X] value[%02X]\n", index, value);
+}
+
+/*
+ * ATA Timing Tables based on 133 MHz PLL output clock.
+ *
+ * If the PLL outputs 100 MHz clock, the ASIC hardware will set
+ * the timing registers automatically when "set features" command is
+ * issued to the device. However, if the PLL output clock is 133 MHz,
+ * the following tables must be used.
+ */
+static struct pio_timing {
+ u8 reg0c, reg0d, reg13;
+} pio_timings [] = {
+ { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */
+ { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */
+ { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */
+ { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */
+ { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
+};
+
+static struct mwdma_timing {
+ u8 reg0e, reg0f;
+} mwdma_timings [] = {
+ { 0xdf, 0x5f }, /* MWDMA mode 0 */
+ { 0x6b, 0x27 }, /* MWDMA mode 1 */
+ { 0x69, 0x25 }, /* MWDMA mode 2 */
+};
+
+static struct udma_timing {
+ u8 reg10, reg11, reg12;
+} udma_timings [] = {
+ { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
+ { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */
+ { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */
+ { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */
+ { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */
+ { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */
+ { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
+};
+
+static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned long indexreg = hwif->dma_vendor1;
- unsigned long datareg = hwif->dma_vendor3;
- u8 thold = 0x10;
- u8 adj = (drive->dn%2) ? 0x08 : 0x00;
- u8 speed = ide_rate_filter(pdcnew_ratemask(drive), xferspeed);
-
- if (speed == XFER_UDMA_2) {
- hwif->OUTB((thold + adj), indexreg);
- hwif->OUTB((hwif->INB(datareg) & 0x7f), datareg);
- }
+ u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
+ int err;
- switch (speed) {
- case XFER_UDMA_7:
- speed = XFER_UDMA_6;
- case XFER_UDMA_6: set_ultra(0x1a, 0x01, 0xcb); break;
- case XFER_UDMA_5: set_ultra(0x1a, 0x02, 0xcb); break;
- case XFER_UDMA_4: set_ultra(0x1a, 0x03, 0xcd); break;
- case XFER_UDMA_3: set_ultra(0x1a, 0x05, 0xcd); break;
- case XFER_UDMA_2: set_ultra(0x2a, 0x07, 0xcd); break;
- case XFER_UDMA_1: set_ultra(0x3a, 0x0a, 0xd0); break;
- case XFER_UDMA_0: set_ultra(0x4a, 0x0f, 0xd5); break;
- case XFER_MW_DMA_2: set_ata2(0x69, 0x25); break;
- case XFER_MW_DMA_1: set_ata2(0x6b, 0x27); break;
- case XFER_MW_DMA_0: set_ata2(0xdf, 0x5f); break;
- case XFER_PIO_4: set_pio(0x23, 0x09, 0x25); break;
- case XFER_PIO_3: set_pio(0x27, 0x0d, 0x35); break;
- case XFER_PIO_2: set_pio(0x23, 0x26, 0x64); break;
- case XFER_PIO_1: set_pio(0x46, 0x29, 0xa4); break;
- case XFER_PIO_0: set_pio(0xfb, 0x2b, 0xac); break;
- default:
- ;
- }
+ speed = ide_rate_filter(pdcnew_ratemask(drive), speed);
+
+ /*
+ * Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will
+ * automatically set the timing registers based on 100 MHz PLL output.
+ */
+ err = ide_config_drive_speed(drive, speed);
+
+ /*
+ * As we set up the PLL to output 133 MHz for UltraDMA/133 capable
+ * chips, we must override the default register settings...
+ */
+ if (max_dma_rate(hwif->pci_dev) == 4) {
+ u8 mode = speed & 0x07;
+
+ switch (speed) {
+ case XFER_UDMA_6:
+ case XFER_UDMA_5:
+ case XFER_UDMA_4:
+ case XFER_UDMA_3:
+ case XFER_UDMA_2:
+ case XFER_UDMA_1:
+ case XFER_UDMA_0:
+ set_indexed_reg(hwif, 0x10 + adj,
+ udma_timings[mode].reg10);
+ set_indexed_reg(hwif, 0x11 + adj,
+ udma_timings[mode].reg11);
+ set_indexed_reg(hwif, 0x12 + adj,
+ udma_timings[mode].reg12);
+ break;
+
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ set_indexed_reg(hwif, 0x0e + adj,
+ mwdma_timings[mode].reg0e);
+ set_indexed_reg(hwif, 0x0f + adj,
+ mwdma_timings[mode].reg0f);
+ break;
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ set_indexed_reg(hwif, 0x0c + adj,
+ pio_timings[mode].reg0c);
+ set_indexed_reg(hwif, 0x0d + adj,
+ pio_timings[mode].reg0d);
+ set_indexed_reg(hwif, 0x13 + adj,
+ pio_timings[mode].reg13);
+ break;
+ default:
+ printk(KERN_ERR "pdc202xx_new: "
+ "Unknown speed %d ignored\n", speed);
+ }
+ } else if (speed == XFER_UDMA_2) {
+ /* Set tHOLD bit to 0 if using UDMA mode 2 */
+ u8 tmp = get_indexed_reg(hwif, 0x10 + adj);
- return (ide_config_drive_speed(drive, speed));
+ set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f);
+ }
+
+ return err;
}
/* 0 1 2 3 4 5 6 7 8
*/
static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
{
- u8 speed;
-
- if (pio == 5) pio = 4;
- speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL);
-
- (void)pdcnew_new_tune_chipset(drive, speed);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ (void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
-static u8 pdcnew_new_cable_detect (ide_hwif_t *hwif)
+static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
{
- hwif->OUTB(0x0b, hwif->dma_vendor1);
- return ((u8)((hwif->INB(hwif->dma_vendor3) & 0x04)));
+ return get_indexed_reg(hwif, 0x0b) & 0x04;
}
-static int config_chipset_for_dma (ide_drive_t *drive)
+
+static int config_chipset_for_dma(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = HWIF(drive);
- u8 speed = -1;
- u8 cable;
-
- u8 ultra_66 = ((id->dma_ultra & 0x0010) ||
- (id->dma_ultra & 0x0008)) ? 1 : 0;
-
- cable = pdcnew_new_cable_detect(hwif);
+ u8 ultra_66 = (id->dma_ultra & 0x0078) ? 1 : 0;
+ u8 cable = pdcnew_cable_detect(hwif);
+ u8 speed;
if (ultra_66 && cable) {
- printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
+ printk(KERN_WARNING "Warning: %s channel "
+ "requires an 80-pin cable for operation.\n",
+ hwif->channel ? "Secondary" : "Primary");
printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
}
if (drive->media != ide_disk)
return 0;
- if (id->capability & 4) { /* IORDY_EN & PREFETCH_EN */
- hwif->OUTB((0x13 + ((drive->dn%2) ? 0x08 : 0x00)), hwif->dma_vendor1);
- hwif->OUTB((hwif->INB(hwif->dma_vendor3)|0x03), hwif->dma_vendor3);
+
+ if (id->capability & 4) {
+ /*
+ * Set IORDY_EN & PREFETCH_EN (this seems to have
+ * NO real effect since this register is reloaded
+ * by hardware when the transfer mode is selected)
+ */
+ u8 tmp, adj = (drive->dn & 1) ? 0x08 : 0x00;
+
+ tmp = get_indexed_reg(hwif, 0x13 + adj);
+ set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03);
}
speed = ide_dma_speed(drive, pdcnew_ratemask(drive));
- if (!(speed)) {
- hwif->tuneproc(drive, 5);
+ if (!speed)
return 0;
- }
(void) hwif->speedproc(drive, speed);
return ide_dma_enable(drive);
}
-static int pdcnew_config_drive_xfer_rate (ide_drive_t *drive)
+static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
- hwif->tuneproc(drive, 5);
+ hwif->tuneproc(drive, 255);
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */
return 0;
}
-static int pdcnew_quirkproc (ide_drive_t *drive)
+static int pdcnew_quirkproc(ide_drive_t *drive)
{
- return ((int) check_in_drive_lists(drive, pdc_quirk_drives));
+ return check_in_drive_lists(drive, pdc_quirk_drives);
}
static int pdcnew_ide_dma_lostirq(ide_drive_t *drive)
return __ide_dma_timeout(drive);
}
-static void pdcnew_new_reset (ide_drive_t *drive)
+static void pdcnew_reset(ide_drive_t *drive)
{
/*
* Deleted this because it is redundant from the caller.
*/
- printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
+ printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n",
HWIF(drive)->channel ? "Secondary" : "Primary");
}
+/**
+ * read_counter - Read the byte count registers
+ * @dma_base: for the port address
+ */
+static long __devinit read_counter(u32 dma_base)
+{
+ u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08;
+ u8 cnt0, cnt1, cnt2, cnt3;
+ long count = 0, last;
+ int retry = 3;
+
+ do {
+ last = count;
+
+ /* Read the current count */
+ outb(0x20, pri_dma_base + 0x01);
+ cnt0 = inb(pri_dma_base + 0x03);
+ outb(0x21, pri_dma_base + 0x01);
+ cnt1 = inb(pri_dma_base + 0x03);
+ outb(0x20, sec_dma_base + 0x01);
+ cnt2 = inb(sec_dma_base + 0x03);
+ outb(0x21, sec_dma_base + 0x01);
+ cnt3 = inb(sec_dma_base + 0x03);
+
+ count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0;
+
+ /*
+ * The 30-bit decrementing counter is read in 4 pieces.
+ * Incorrect value may be read when the most significant bytes
+ * are changing...
+ */
+ } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count));
+
+ DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n",
+ cnt0, cnt1, cnt2, cnt3);
+
+ return count;
+}
+
+/**
+ * detect_pll_input_clock - Detect the PLL input clock in Hz.
+ * @dma_base: for the port address
+ * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock.
+ */
+static long __devinit detect_pll_input_clock(unsigned long dma_base)
+{
+ long start_count, end_count;
+ long pll_input;
+ u8 scr1;
+
+ start_count = read_counter(dma_base);
+
+ /* Start the test mode */
+ outb(0x01, dma_base + 0x01);
+ scr1 = inb(dma_base + 0x03);
+ DBG("scr1[%02X]\n", scr1);
+ outb(scr1 | 0x40, dma_base + 0x03);
+
+ /* Let the counter run for 10 ms. */
+ mdelay(10);
+
+ end_count = read_counter(dma_base);
+
+ /* Stop the test mode */
+ outb(0x01, dma_base + 0x01);
+ scr1 = inb(dma_base + 0x03);
+ DBG("scr1[%02X]\n", scr1);
+ outb(scr1 & ~0x40, dma_base + 0x03);
+
+ /*
+ * Calculate the input clock in Hz
+ * (the clock counter is 30 bit wide and counts down)
+ */
+ pll_input = ((start_count - end_count) & 0x3ffffff) * 100;
+
+ DBG("start[%ld] end[%ld]\n", start_count, end_count);
+
+ return pll_input;
+}
+
#ifdef CONFIG_PPC_PMAC
static void __devinit apple_kiwi_init(struct pci_dev *pdev)
{
struct device_node *np = pci_device_to_OF_node(pdev);
unsigned int class_rev = 0;
- void __iomem *mmio;
u8 conf;
if (np == NULL || !device_is_compatible(np, "kiwi-root"))
if (class_rev >= 0x03) {
/* Setup chip magic config stuff (from darwin) */
- pci_read_config_byte(pdev, 0x40, &conf);
- pci_write_config_byte(pdev, 0x40, conf | 0x01);
- }
- mmio = ioremap(pci_resource_start(pdev, 5),
- pci_resource_len(pdev, 5));
-
- /* Setup some PLL stuffs */
- switch (pdev->device) {
- case PCI_DEVICE_ID_PROMISE_20270:
- writew(0x0d2b, mmio + 0x1202);
- mdelay(30);
- break;
- case PCI_DEVICE_ID_PROMISE_20271:
- writew(0x0826, mmio + 0x1202);
- mdelay(30);
- break;
+ pci_read_config_byte (pdev, 0x40, &conf);
+ pci_write_config_byte(pdev, 0x40, (conf | 0x01));
}
-
- iounmap(mmio);
}
#endif /* CONFIG_PPC_PMAC */
static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name)
{
+ unsigned long dma_base = pci_resource_start(dev, 4);
+ unsigned long sec_dma_base = dma_base + 0x08;
+ long pll_input, pll_output, ratio;
+ int f, r;
+ u8 pll_ctl0, pll_ctl1;
+
if (dev->resource[PCI_ROM_RESOURCE].start) {
pci_write_config_dword(dev, PCI_ROM_ADDRESS,
dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
apple_kiwi_init(dev);
#endif
+ /* Calculate the required PLL output frequency */
+ switch(max_dma_rate(dev)) {
+ case 4: /* it's 133 MHz for Ultra133 chips */
+ pll_output = 133333333;
+ break;
+ case 3: /* and 100 MHz for Ultra100 chips */
+ default:
+ pll_output = 100000000;
+ break;
+ }
+
+ /*
+ * Detect PLL input clock.
+ * On some systems, where PCI bus is running at non-standard clock rate
+ * (e.g. 25 or 40 MHz), we have to adjust the cycle time.
+ * PDC20268 and newer chips employ PLL circuit to help correct timing
+ * registers setting.
+ */
+ pll_input = detect_pll_input_clock(dma_base);
+ printk("%s: PLL input clock is %ld kHz\n", name, pll_input / 1000);
+
+ /* Sanity check */
+ if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
+ printk(KERN_ERR "%s: Bad PLL input clock %ld Hz, giving up!\n",
+ name, pll_input);
+ goto out;
+ }
+
+#ifdef DEBUG
+ DBG("pll_output is %ld Hz\n", pll_output);
+
+ /* Show the current clock value of PLL control register
+ * (maybe already configured by the BIOS)
+ */
+ outb(0x02, sec_dma_base + 0x01);
+ pll_ctl0 = inb(sec_dma_base + 0x03);
+ outb(0x03, sec_dma_base + 0x01);
+ pll_ctl1 = inb(sec_dma_base + 0x03);
+
+ DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+#endif
+
+ /*
+ * Calculate the ratio of F, R and NO
+ * POUT = (F + 2) / (( R + 2) * NO)
+ */
+ ratio = pll_output / (pll_input / 1000);
+ if (ratio < 8600L) { /* 8.6x */
+ /* Using NO = 0x01, R = 0x0d */
+ r = 0x0d;
+ } else if (ratio < 12900L) { /* 12.9x */
+ /* Using NO = 0x01, R = 0x08 */
+ r = 0x08;
+ } else if (ratio < 16100L) { /* 16.1x */
+ /* Using NO = 0x01, R = 0x06 */
+ r = 0x06;
+ } else if (ratio < 64000L) { /* 64x */
+ r = 0x00;
+ } else {
+ /* Invalid ratio */
+ printk(KERN_ERR "%s: Bad ratio %ld, giving up!\n", name, ratio);
+ goto out;
+ }
+
+ f = (ratio * (r + 2)) / 1000 - 2;
+
+ DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio);
+
+ if (unlikely(f < 0 || f > 127)) {
+ /* Invalid F */
+ printk(KERN_ERR "%s: F[%d] invalid!\n", name, f);
+ goto out;
+ }
+
+ pll_ctl0 = (u8) f;
+ pll_ctl1 = (u8) r;
+
+ DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+
+ outb(0x02, sec_dma_base + 0x01);
+ outb(pll_ctl0, sec_dma_base + 0x03);
+ outb(0x03, sec_dma_base + 0x01);
+ outb(pll_ctl1, sec_dma_base + 0x03);
+
+ /* Wait the PLL circuit to be stable */
+ mdelay(30);
+
+#ifdef DEBUG
+ /*
+ * Show the current clock value of PLL control register
+ */
+ outb(0x02, sec_dma_base + 0x01);
+ pll_ctl0 = inb(sec_dma_base + 0x03);
+ outb(0x03, sec_dma_base + 0x01);
+ pll_ctl1 = inb(sec_dma_base + 0x03);
+
+ DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
+#endif
+
+ out:
return dev->irq;
}
hwif->tuneproc = &pdcnew_tune_drive;
hwif->quirkproc = &pdcnew_quirkproc;
- hwif->speedproc = &pdcnew_new_tune_chipset;
- hwif->resetproc = &pdcnew_new_reset;
+ hwif->speedproc = &pdcnew_tune_chipset;
+ hwif->resetproc = &pdcnew_reset;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate;
hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq;
hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout;
- if (!(hwif->udma_four))
- hwif->udma_four = (pdcnew_new_cable_detect(hwif)) ? 0 : 1;
+
+ if (!hwif->udma_four)
+ hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1;
+
if (!noautodma)
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
+
#if PDC202_DEBUG_CABLE
printk(KERN_DEBUG "%s: %s-pin cable\n",
hwif->name, hwif->udma_four ? "80" : "40");
ide_pci_device_t *d)
{
struct pci_dev *findev = NULL;
+ int ret;
if ((dev->bus->self &&
dev->bus->self->vendor == PCI_VENDOR_ID_DEC) &&
if (PCI_SLOT(dev->devfn) & 2)
return -ENODEV;
d->extra = 0;
- while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
+ while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
if ((findev->vendor == dev->vendor) &&
(findev->device == dev->device) &&
(PCI_SLOT(findev->devfn) & 2)) {
if (findev->irq != dev->irq) {
findev->irq = dev->irq;
}
- return ide_setup_pci_devices(dev, findev, d);
+ ret = ide_setup_pci_devices(dev, findev, d);
+ pci_dev_put(findev);
+ return ret;
}
}
}
/* This is a painful system best to let it self tune for now */
return;
}
+ /* ESB2 appears to generate spurious DMA interrupts in PIO mode
+ when in native mode */
+ if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_ESB2_18)
+ hwif->atapi_irq_bogon = 1;
hwif->autodma = 0;
hwif->tuneproc = &piix_tune_drive;
if (trueid == 0x5517) { /* SiS 961/961B */
- lpc_bridge = pci_find_slot(0x00, 0x10); /* Bus 0, Dev 2, Fn 0 */
+ lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(dev, 0x49, &prefctl);
+ pci_dev_put(lpc_bridge);
if (sbrev == 0x10 && (prefctl & 0x80)) {
printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
//DBG(("sl82c105_selectproc(drive:%s)\n", drive->name));
mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16;
- old = val = *((u32 *)&hwif->hwif_data);
+ old = val = (u32)pci_get_drvdata(dev);
if (drive->using_dma)
val &= ~mask;
else
val |= mask;
if (old != val) {
pci_write_config_dword(dev, 0x40, val);
- *((u32 *)&hwif->hwif_data) = val;
+ pci_set_drvdata(dev, (void *)val);
}
}
*/
static void sl82c105_resetproc(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
u32 val;
DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
pci_read_config_dword(dev, 0x40, &val);
- *((u32 *)&hwif->hwif_data) = val;
+ pci_set_drvdata(dev, (void *)val);
}
/*
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
+ pci_set_drvdata(dev, (void *)val);
return dev->irq;
}
static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
unsigned int rev;
u8 dma_state;
- u32 val;
-
+
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
hwif->tuneproc = tune_sl82c105;
hwif->selectproc = sl82c105_selectproc;
hwif->resetproc = sl82c105_resetproc;
-
- /* Default to PIO 0 for fallback unless tuned otherwise,
- * we always autotune PIO, this is done before DMA is
- * checked, so there is no risk of accidentally disabling
- * DMA
- */
+
+ /*
+ * Default to PIO 0 for fallback unless tuned otherwise.
+ * We always autotune PIO, this is done before DMA is checked,
+ * so there's no risk of accidentally disabling DMA
+ */
hwif->drives[0].pio_speed = XFER_PIO_0;
hwif->drives[0].autotune = 1;
- hwif->drives[1].pio_speed = XFER_PIO_1;
+ hwif->drives[1].pio_speed = XFER_PIO_0;
hwif->drives[1].autotune = 1;
- pci_read_config_dword(dev, 0x40, &val);
- *((u32 *)&hwif->hwif_data) = val;
-
hwif->atapi_dma = 0;
hwif->mwdma_mask = 0;
hwif->swdma_mask = 0;
pre_init = 0;
if (!scan_direction) {
- while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
ide_scan_pcidev(dev);
}
} else {
- while ((dev = pci_find_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
ide_scan_pcidev(dev);
}
}
/* return the index (within a minor number block) of a file */
static inline unsigned char ieee1394_file_to_instance(struct file *file)
{
- return file->f_dentry->d_inode->i_cindex;
+ return file->f_path.dentry->d_inode->i_cindex;
}
extern int hpsb_disable_irm;
}
- i2c_bit_del_bus(i2c_ad);
+ i2c_del_adapter(i2c_ad);
kfree(i2c_ad);
}
}
infiniband-$(CONFIG_INFINIBAND_ADDR_TRANS) := ib_addr.o rdma_cm.o
+user_access-$(CONFIG_INFINIBAND_ADDR_TRANS) := rdma_ucm.o
obj-$(CONFIG_INFINIBAND) += ib_core.o ib_mad.o ib_sa.o \
ib_cm.o iw_cm.o $(infiniband-y)
obj-$(CONFIG_INFINIBAND_USER_MAD) += ib_umad.o
-obj-$(CONFIG_INFINIBAND_USER_ACCESS) += ib_uverbs.o ib_ucm.o
+obj-$(CONFIG_INFINIBAND_USER_ACCESS) += ib_uverbs.o ib_ucm.o \
+ $(user_access-y)
ib_core-y := packer.o ud_header.o verbs.o sysfs.o \
device.o fmr_pool.o cache.o
rdma_cm-y := cma.o
+rdma_ucm-y := ucma.o
+
ib_addr-y := addr.o
ib_umad-y := user_mad.o
spin_lock_irqsave(&cm_id_priv->lock, flags);
switch (cm_id_priv->id.state) {
+ /* Allow transition to RTS before sending REP */
+ case IB_CM_REQ_RCVD:
+ case IB_CM_MRA_REQ_SENT:
+
case IB_CM_REP_RCVD:
case IB_CM_MRA_REP_SENT:
case IB_CM_REP_SENT:
static struct workqueue_struct *cma_wq;
static DEFINE_IDR(sdp_ps);
static DEFINE_IDR(tcp_ps);
+static DEFINE_IDR(udp_ps);
struct cma_device {
struct list_head list;
u32 seq_num;
u32 qp_num;
- enum ib_qp_type qp_type;
u8 srq;
};
id->qp = qp;
id_priv->qp_num = qp->qp_num;
- id_priv->qp_type = qp->qp_type;
id_priv->srq = (qp->srq != NULL);
return 0;
err:
return cma_zero_addr(addr) || cma_loopback_addr(addr);
}
+static inline __be16 cma_port(struct sockaddr *addr)
+{
+ if (addr->sa_family == AF_INET)
+ return ((struct sockaddr_in *) addr)->sin_port;
+ else
+ return ((struct sockaddr_in6 *) addr)->sin6_port;
+}
+
static inline int cma_any_port(struct sockaddr *addr)
{
- return !((struct sockaddr_in *) addr)->sin_port;
+ return !cma_port(addr);
}
static int cma_get_net_info(void *hdr, enum rdma_port_space ps,
}
}
-static int cma_notify_user(struct rdma_id_private *id_priv,
- enum rdma_cm_event_type type, int status,
- void *data, u8 data_len)
-{
- struct rdma_cm_event event;
-
- event.event = type;
- event.status = status;
- event.private_data = data;
- event.private_data_len = data_len;
-
- return id_priv->id.event_handler(&id_priv->id, &event);
-}
-
static void cma_cancel_route(struct rdma_id_private *id_priv)
{
switch (rdma_node_get_transport(id_priv->id.device->node_type)) {
return 0;
}
-static int cma_rtu_recv(struct rdma_id_private *id_priv)
+static void cma_set_rep_event_data(struct rdma_cm_event *event,
+ struct ib_cm_rep_event_param *rep_data,
+ void *private_data)
{
- int ret;
-
- ret = cma_modify_qp_rts(&id_priv->id);
- if (ret)
- goto reject;
-
- return 0;
-reject:
- cma_modify_qp_err(&id_priv->id);
- ib_send_cm_rej(id_priv->cm_id.ib, IB_CM_REJ_CONSUMER_DEFINED,
- NULL, 0, NULL, 0);
- return ret;
+ event->param.conn.private_data = private_data;
+ event->param.conn.private_data_len = IB_CM_REP_PRIVATE_DATA_SIZE;
+ event->param.conn.responder_resources = rep_data->responder_resources;
+ event->param.conn.initiator_depth = rep_data->initiator_depth;
+ event->param.conn.flow_control = rep_data->flow_control;
+ event->param.conn.rnr_retry_count = rep_data->rnr_retry_count;
+ event->param.conn.srq = rep_data->srq;
+ event->param.conn.qp_num = rep_data->remote_qpn;
}
static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
{
struct rdma_id_private *id_priv = cm_id->context;
- enum rdma_cm_event_type event;
- u8 private_data_len = 0;
- int ret = 0, status = 0;
+ struct rdma_cm_event event;
+ int ret = 0;
atomic_inc(&id_priv->dev_remove);
if (!cma_comp(id_priv, CMA_CONNECT))
goto out;
+ memset(&event, 0, sizeof event);
switch (ib_event->event) {
case IB_CM_REQ_ERROR:
case IB_CM_REP_ERROR:
- event = RDMA_CM_EVENT_UNREACHABLE;
- status = -ETIMEDOUT;
+ event.event = RDMA_CM_EVENT_UNREACHABLE;
+ event.status = -ETIMEDOUT;
break;
case IB_CM_REP_RECEIVED:
- status = cma_verify_rep(id_priv, ib_event->private_data);
- if (status)
- event = RDMA_CM_EVENT_CONNECT_ERROR;
+ event.status = cma_verify_rep(id_priv, ib_event->private_data);
+ if (event.status)
+ event.event = RDMA_CM_EVENT_CONNECT_ERROR;
else if (id_priv->id.qp && id_priv->id.ps != RDMA_PS_SDP) {
- status = cma_rep_recv(id_priv);
- event = status ? RDMA_CM_EVENT_CONNECT_ERROR :
- RDMA_CM_EVENT_ESTABLISHED;
+ event.status = cma_rep_recv(id_priv);
+ event.event = event.status ? RDMA_CM_EVENT_CONNECT_ERROR :
+ RDMA_CM_EVENT_ESTABLISHED;
} else
- event = RDMA_CM_EVENT_CONNECT_RESPONSE;
- private_data_len = IB_CM_REP_PRIVATE_DATA_SIZE;
+ event.event = RDMA_CM_EVENT_CONNECT_RESPONSE;
+ cma_set_rep_event_data(&event, &ib_event->param.rep_rcvd,
+ ib_event->private_data);
break;
case IB_CM_RTU_RECEIVED:
- status = cma_rtu_recv(id_priv);
- event = status ? RDMA_CM_EVENT_CONNECT_ERROR :
- RDMA_CM_EVENT_ESTABLISHED;
+ case IB_CM_USER_ESTABLISHED:
+ event.event = RDMA_CM_EVENT_ESTABLISHED;
break;
case IB_CM_DREQ_ERROR:
- status = -ETIMEDOUT; /* fall through */
+ event.status = -ETIMEDOUT; /* fall through */
case IB_CM_DREQ_RECEIVED:
case IB_CM_DREP_RECEIVED:
if (!cma_comp_exch(id_priv, CMA_CONNECT, CMA_DISCONNECT))
goto out;
- event = RDMA_CM_EVENT_DISCONNECTED;
+ event.event = RDMA_CM_EVENT_DISCONNECTED;
break;
case IB_CM_TIMEWAIT_EXIT:
case IB_CM_MRA_RECEIVED:
goto out;
case IB_CM_REJ_RECEIVED:
cma_modify_qp_err(&id_priv->id);
- status = ib_event->param.rej_rcvd.reason;
- event = RDMA_CM_EVENT_REJECTED;
- private_data_len = IB_CM_REJ_PRIVATE_DATA_SIZE;
+ event.status = ib_event->param.rej_rcvd.reason;
+ event.event = RDMA_CM_EVENT_REJECTED;
+ event.param.conn.private_data = ib_event->private_data;
+ event.param.conn.private_data_len = IB_CM_REJ_PRIVATE_DATA_SIZE;
break;
default:
printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d",
goto out;
}
- ret = cma_notify_user(id_priv, event, status, ib_event->private_data,
- private_data_len);
+ ret = id_priv->id.event_handler(&id_priv->id, &event);
if (ret) {
/* Destroy the CM ID by returning a non-zero value. */
id_priv->cm_id.ib = NULL;
return ret;
}
-static struct rdma_id_private *cma_new_id(struct rdma_cm_id *listen_id,
- struct ib_cm_event *ib_event)
+static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id,
+ struct ib_cm_event *ib_event)
{
struct rdma_id_private *id_priv;
struct rdma_cm_id *id;
return NULL;
}
+static struct rdma_id_private *cma_new_udp_id(struct rdma_cm_id *listen_id,
+ struct ib_cm_event *ib_event)
+{
+ struct rdma_id_private *id_priv;
+ struct rdma_cm_id *id;
+ union cma_ip_addr *src, *dst;
+ __u16 port;
+ u8 ip_ver;
+ int ret;
+
+ id = rdma_create_id(listen_id->event_handler, listen_id->context,
+ listen_id->ps);
+ if (IS_ERR(id))
+ return NULL;
+
+
+ if (cma_get_net_info(ib_event->private_data, listen_id->ps,
+ &ip_ver, &port, &src, &dst))
+ goto err;
+
+ cma_save_net_info(&id->route.addr, &listen_id->route.addr,
+ ip_ver, port, src, dst);
+
+ ret = rdma_translate_ip(&id->route.addr.src_addr,
+ &id->route.addr.dev_addr);
+ if (ret)
+ goto err;
+
+ id_priv = container_of(id, struct rdma_id_private, id);
+ id_priv->state = CMA_CONNECT;
+ return id_priv;
+err:
+ rdma_destroy_id(id);
+ return NULL;
+}
+
+static void cma_set_req_event_data(struct rdma_cm_event *event,
+ struct ib_cm_req_event_param *req_data,
+ void *private_data, int offset)
+{
+ event->param.conn.private_data = private_data + offset;
+ event->param.conn.private_data_len = IB_CM_REQ_PRIVATE_DATA_SIZE - offset;
+ event->param.conn.responder_resources = req_data->responder_resources;
+ event->param.conn.initiator_depth = req_data->initiator_depth;
+ event->param.conn.flow_control = req_data->flow_control;
+ event->param.conn.retry_count = req_data->retry_count;
+ event->param.conn.rnr_retry_count = req_data->rnr_retry_count;
+ event->param.conn.srq = req_data->srq;
+ event->param.conn.qp_num = req_data->remote_qpn;
+}
+
static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
{
struct rdma_id_private *listen_id, *conn_id;
+ struct rdma_cm_event event;
int offset, ret;
listen_id = cm_id->context;
goto out;
}
- conn_id = cma_new_id(&listen_id->id, ib_event);
+ memset(&event, 0, sizeof event);
+ offset = cma_user_data_offset(listen_id->id.ps);
+ event.event = RDMA_CM_EVENT_CONNECT_REQUEST;
+ if (listen_id->id.ps == RDMA_PS_UDP) {
+ conn_id = cma_new_udp_id(&listen_id->id, ib_event);
+ event.param.ud.private_data = ib_event->private_data + offset;
+ event.param.ud.private_data_len =
+ IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE - offset;
+ } else {
+ conn_id = cma_new_conn_id(&listen_id->id, ib_event);
+ cma_set_req_event_data(&event, &ib_event->param.req_rcvd,
+ ib_event->private_data, offset);
+ }
if (!conn_id) {
ret = -ENOMEM;
goto out;
cm_id->context = conn_id;
cm_id->cm_handler = cma_ib_handler;
- offset = cma_user_data_offset(listen_id->id.ps);
- ret = cma_notify_user(conn_id, RDMA_CM_EVENT_CONNECT_REQUEST, 0,
- ib_event->private_data + offset,
- IB_CM_REQ_PRIVATE_DATA_SIZE - offset);
+ ret = conn_id->id.event_handler(&conn_id->id, &event);
if (!ret)
goto out;
static __be64 cma_get_service_id(enum rdma_port_space ps, struct sockaddr *addr)
{
- return cpu_to_be64(((u64)ps << 16) +
- be16_to_cpu(((struct sockaddr_in *) addr)->sin_port));
+ return cpu_to_be64(((u64)ps << 16) + be16_to_cpu(cma_port(addr)));
}
static void cma_set_compare_data(enum rdma_port_space ps, struct sockaddr *addr,
static int cma_iw_handler(struct iw_cm_id *iw_id, struct iw_cm_event *iw_event)
{
struct rdma_id_private *id_priv = iw_id->context;
- enum rdma_cm_event_type event = 0;
+ struct rdma_cm_event event;
struct sockaddr_in *sin;
int ret = 0;
+ memset(&event, 0, sizeof event);
atomic_inc(&id_priv->dev_remove);
switch (iw_event->event) {
case IW_CM_EVENT_CLOSE:
- event = RDMA_CM_EVENT_DISCONNECTED;
+ event.event = RDMA_CM_EVENT_DISCONNECTED;
break;
case IW_CM_EVENT_CONNECT_REPLY:
sin = (struct sockaddr_in *) &id_priv->id.route.addr.src_addr;
sin = (struct sockaddr_in *) &id_priv->id.route.addr.dst_addr;
*sin = iw_event->remote_addr;
if (iw_event->status)
- event = RDMA_CM_EVENT_REJECTED;
+ event.event = RDMA_CM_EVENT_REJECTED;
else
- event = RDMA_CM_EVENT_ESTABLISHED;
+ event.event = RDMA_CM_EVENT_ESTABLISHED;
break;
case IW_CM_EVENT_ESTABLISHED:
- event = RDMA_CM_EVENT_ESTABLISHED;
+ event.event = RDMA_CM_EVENT_ESTABLISHED;
break;
default:
BUG_ON(1);
}
- ret = cma_notify_user(id_priv, event, iw_event->status,
- iw_event->private_data,
- iw_event->private_data_len);
+ event.status = iw_event->status;
+ event.param.conn.private_data = iw_event->private_data;
+ event.param.conn.private_data_len = iw_event->private_data_len;
+ ret = id_priv->id.event_handler(&id_priv->id, &event);
if (ret) {
/* Destroy the CM ID by returning a non-zero value. */
id_priv->cm_id.iw = NULL;
struct rdma_id_private *listen_id, *conn_id;
struct sockaddr_in *sin;
struct net_device *dev = NULL;
+ struct rdma_cm_event event;
int ret;
listen_id = cm_id->context;
sin = (struct sockaddr_in *) &new_cm_id->route.addr.dst_addr;
*sin = iw_event->remote_addr;
- ret = cma_notify_user(conn_id, RDMA_CM_EVENT_CONNECT_REQUEST, 0,
- iw_event->private_data,
- iw_event->private_data_len);
+ memset(&event, 0, sizeof event);
+ event.event = RDMA_CM_EVENT_CONNECT_REQUEST;
+ event.param.conn.private_data = iw_event->private_data;
+ event.param.conn.private_data_len = iw_event->private_data_len;
+ ret = conn_id->id.event_handler(&conn_id->id, &event);
if (ret) {
/* User wants to destroy the CM ID */
conn_id->cm_id.iw = NULL;
struct rdma_dev_addr *dev_addr, void *context)
{
struct rdma_id_private *id_priv = context;
- enum rdma_cm_event_type event;
+ struct rdma_cm_event event;
+ memset(&event, 0, sizeof event);
atomic_inc(&id_priv->dev_remove);
/*
if (status) {
if (!cma_comp_exch(id_priv, CMA_ADDR_RESOLVED, CMA_ADDR_BOUND))
goto out;
- event = RDMA_CM_EVENT_ADDR_ERROR;
+ event.event = RDMA_CM_EVENT_ADDR_ERROR;
+ event.status = status;
} else {
memcpy(&id_priv->id.route.addr.src_addr, src_addr,
ip_addr_size(src_addr));
- event = RDMA_CM_EVENT_ADDR_RESOLVED;
+ event.event = RDMA_CM_EVENT_ADDR_RESOLVED;
}
- if (cma_notify_user(id_priv, event, status, NULL, 0)) {
+ if (id_priv->id.event_handler(&id_priv->id, &event)) {
cma_exch(id_priv, CMA_DESTROYING);
cma_release_remove(id_priv);
cma_deref_id(id_priv);
case RDMA_PS_TCP:
ps = &tcp_ps;
break;
+ case RDMA_PS_UDP:
+ ps = &udp_ps;
+ break;
default:
return -EPROTONOSUPPORT;
}
return 0;
}
+static int cma_sidr_rep_handler(struct ib_cm_id *cm_id,
+ struct ib_cm_event *ib_event)
+{
+ struct rdma_id_private *id_priv = cm_id->context;
+ struct rdma_cm_event event;
+ struct ib_cm_sidr_rep_event_param *rep = &ib_event->param.sidr_rep_rcvd;
+ int ret = 0;
+
+ memset(&event, 0, sizeof event);
+ atomic_inc(&id_priv->dev_remove);
+ if (!cma_comp(id_priv, CMA_CONNECT))
+ goto out;
+
+ switch (ib_event->event) {
+ case IB_CM_SIDR_REQ_ERROR:
+ event.event = RDMA_CM_EVENT_UNREACHABLE;
+ event.status = -ETIMEDOUT;
+ break;
+ case IB_CM_SIDR_REP_RECEIVED:
+ event.param.ud.private_data = ib_event->private_data;
+ event.param.ud.private_data_len = IB_CM_SIDR_REP_PRIVATE_DATA_SIZE;
+ if (rep->status != IB_SIDR_SUCCESS) {
+ event.event = RDMA_CM_EVENT_UNREACHABLE;
+ event.status = ib_event->param.sidr_rep_rcvd.status;
+ break;
+ }
+ if (rep->qkey != RDMA_UD_QKEY) {
+ event.event = RDMA_CM_EVENT_UNREACHABLE;
+ event.status = -EINVAL;
+ break;
+ }
+ ib_init_ah_from_path(id_priv->id.device, id_priv->id.port_num,
+ id_priv->id.route.path_rec,
+ &event.param.ud.ah_attr);
+ event.param.ud.qp_num = rep->qpn;
+ event.param.ud.qkey = rep->qkey;
+ event.event = RDMA_CM_EVENT_ESTABLISHED;
+ event.status = 0;
+ break;
+ default:
+ printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d",
+ ib_event->event);
+ goto out;
+ }
+
+ ret = id_priv->id.event_handler(&id_priv->id, &event);
+ if (ret) {
+ /* Destroy the CM ID by returning a non-zero value. */
+ id_priv->cm_id.ib = NULL;
+ cma_exch(id_priv, CMA_DESTROYING);
+ cma_release_remove(id_priv);
+ rdma_destroy_id(&id_priv->id);
+ return ret;
+ }
+out:
+ cma_release_remove(id_priv);
+ return ret;
+}
+
+static int cma_resolve_ib_udp(struct rdma_id_private *id_priv,
+ struct rdma_conn_param *conn_param)
+{
+ struct ib_cm_sidr_req_param req;
+ struct rdma_route *route;
+ int ret;
+
+ req.private_data_len = sizeof(struct cma_hdr) +
+ conn_param->private_data_len;
+ req.private_data = kzalloc(req.private_data_len, GFP_ATOMIC);
+ if (!req.private_data)
+ return -ENOMEM;
+
+ if (conn_param->private_data && conn_param->private_data_len)
+ memcpy((void *) req.private_data + sizeof(struct cma_hdr),
+ conn_param->private_data, conn_param->private_data_len);
+
+ route = &id_priv->id.route;
+ ret = cma_format_hdr((void *) req.private_data, id_priv->id.ps, route);
+ if (ret)
+ goto out;
+
+ id_priv->cm_id.ib = ib_create_cm_id(id_priv->id.device,
+ cma_sidr_rep_handler, id_priv);
+ if (IS_ERR(id_priv->cm_id.ib)) {
+ ret = PTR_ERR(id_priv->cm_id.ib);
+ goto out;
+ }
+
+ req.path = route->path_rec;
+ req.service_id = cma_get_service_id(id_priv->id.ps,
+ &route->addr.dst_addr);
+ req.timeout_ms = 1 << (CMA_CM_RESPONSE_TIMEOUT - 8);
+ req.max_cm_retries = CMA_MAX_CM_RETRIES;
+
+ ret = ib_send_cm_sidr_req(id_priv->cm_id.ib, &req);
+ if (ret) {
+ ib_destroy_cm_id(id_priv->cm_id.ib);
+ id_priv->cm_id.ib = NULL;
+ }
+out:
+ kfree(req.private_data);
+ return ret;
+}
+
static int cma_connect_ib(struct rdma_id_private *id_priv,
struct rdma_conn_param *conn_param)
{
req.service_id = cma_get_service_id(id_priv->id.ps,
&route->addr.dst_addr);
req.qp_num = id_priv->qp_num;
- req.qp_type = id_priv->qp_type;
+ req.qp_type = IB_QPT_RC;
req.starting_psn = id_priv->seq_num;
req.responder_resources = conn_param->responder_resources;
req.initiator_depth = conn_param->initiator_depth;
if (!id->qp) {
id_priv->qp_num = conn_param->qp_num;
- id_priv->qp_type = conn_param->qp_type;
id_priv->srq = conn_param->srq;
}
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- ret = cma_connect_ib(id_priv, conn_param);
+ if (id->ps == RDMA_PS_UDP)
+ ret = cma_resolve_ib_udp(id_priv, conn_param);
+ else
+ ret = cma_connect_ib(id_priv, conn_param);
break;
case RDMA_TRANSPORT_IWARP:
ret = cma_connect_iw(id_priv, conn_param);
struct rdma_conn_param *conn_param)
{
struct ib_cm_rep_param rep;
- int ret;
+ struct ib_qp_attr qp_attr;
+ int qp_attr_mask, ret;
- ret = cma_modify_qp_rtr(&id_priv->id);
- if (ret)
- return ret;
+ if (id_priv->id.qp) {
+ ret = cma_modify_qp_rtr(&id_priv->id);
+ if (ret)
+ goto out;
+
+ qp_attr.qp_state = IB_QPS_RTS;
+ ret = ib_cm_init_qp_attr(id_priv->cm_id.ib, &qp_attr,
+ &qp_attr_mask);
+ if (ret)
+ goto out;
+
+ qp_attr.max_rd_atomic = conn_param->initiator_depth;
+ ret = ib_modify_qp(id_priv->id.qp, &qp_attr, qp_attr_mask);
+ if (ret)
+ goto out;
+ }
memset(&rep, 0, sizeof rep);
rep.qp_num = id_priv->qp_num;
rep.rnr_retry_count = conn_param->rnr_retry_count;
rep.srq = id_priv->srq ? 1 : 0;
- return ib_send_cm_rep(id_priv->cm_id.ib, &rep);
+ ret = ib_send_cm_rep(id_priv->cm_id.ib, &rep);
+out:
+ return ret;
}
static int cma_accept_iw(struct rdma_id_private *id_priv,
return iw_cm_accept(id_priv->cm_id.iw, &iw_param);
}
+static int cma_send_sidr_rep(struct rdma_id_private *id_priv,
+ enum ib_cm_sidr_status status,
+ const void *private_data, int private_data_len)
+{
+ struct ib_cm_sidr_rep_param rep;
+
+ memset(&rep, 0, sizeof rep);
+ rep.status = status;
+ if (status == IB_SIDR_SUCCESS) {
+ rep.qp_num = id_priv->qp_num;
+ rep.qkey = RDMA_UD_QKEY;
+ }
+ rep.private_data = private_data;
+ rep.private_data_len = private_data_len;
+
+ return ib_send_cm_sidr_rep(id_priv->cm_id.ib, &rep);
+}
+
int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param)
{
struct rdma_id_private *id_priv;
if (!id->qp && conn_param) {
id_priv->qp_num = conn_param->qp_num;
- id_priv->qp_type = conn_param->qp_type;
id_priv->srq = conn_param->srq;
}
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- if (conn_param)
+ if (id->ps == RDMA_PS_UDP)
+ ret = cma_send_sidr_rep(id_priv, IB_SIDR_SUCCESS,
+ conn_param->private_data,
+ conn_param->private_data_len);
+ else if (conn_param)
ret = cma_accept_ib(id_priv, conn_param);
else
ret = cma_rep_recv(id_priv);
}
EXPORT_SYMBOL(rdma_accept);
+int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event)
+{
+ struct rdma_id_private *id_priv;
+ int ret;
+
+ id_priv = container_of(id, struct rdma_id_private, id);
+ if (!cma_comp(id_priv, CMA_CONNECT))
+ return -EINVAL;
+
+ switch (id->device->node_type) {
+ case RDMA_NODE_IB_CA:
+ ret = ib_cm_notify(id_priv->cm_id.ib, event);
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+EXPORT_SYMBOL(rdma_notify);
+
int rdma_reject(struct rdma_cm_id *id, const void *private_data,
u8 private_data_len)
{
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- ret = ib_send_cm_rej(id_priv->cm_id.ib,
- IB_CM_REJ_CONSUMER_DEFINED, NULL, 0,
- private_data, private_data_len);
+ if (id->ps == RDMA_PS_UDP)
+ ret = cma_send_sidr_rep(id_priv, IB_SIDR_REJECT,
+ private_data, private_data_len);
+ else
+ ret = ib_send_cm_rej(id_priv->cm_id.ib,
+ IB_CM_REJ_CONSUMER_DEFINED, NULL,
+ 0, private_data, private_data_len);
break;
case RDMA_TRANSPORT_IWARP:
ret = iw_cm_reject(id_priv->cm_id.iw,
static int cma_remove_id_dev(struct rdma_id_private *id_priv)
{
+ struct rdma_cm_event event;
enum cma_state state;
/* Record that we want to remove the device */
if (!cma_comp(id_priv, CMA_DEVICE_REMOVAL))
return 0;
- return cma_notify_user(id_priv, RDMA_CM_EVENT_DEVICE_REMOVAL,
- 0, NULL, 0);
+ memset(&event, 0, sizeof event);
+ event.event = RDMA_CM_EVENT_DEVICE_REMOVAL;
+ return id_priv->id.event_handler(&id_priv->id, &event);
}
static void cma_process_remove(struct cma_device *cma_dev)
destroy_workqueue(cma_wq);
idr_destroy(&sdp_ps);
idr_destroy(&tcp_ps);
+ idr_destroy(&udp_ps);
}
module_init(cma_init);
*/
int ib_flush_fmr_pool(struct ib_fmr_pool *pool)
{
- int serial;
-
- atomic_inc(&pool->req_ser);
- /*
- * It's OK if someone else bumps req_ser again here -- we'll
- * just wait a little longer.
- */
- serial = atomic_read(&pool->req_ser);
+ int serial = atomic_inc_return(&pool->req_ser);
wake_up_process(pool->thread);
if (wait_event_interruptible(pool->force_wait,
- atomic_read(&pool->flush_ser) -
- atomic_read(&pool->req_ser) >= 0))
+ atomic_read(&pool->flush_ser) - serial >= 0))
return -EINTR;
return 0;
mad_agent = mad_send_wr->send_buf.mad_agent;
sge = mad_send_wr->sg_list;
- sge[0].addr = dma_map_single(mad_agent->device->dma_device,
- mad_send_wr->send_buf.mad,
- sge[0].length,
- DMA_TO_DEVICE);
- pci_unmap_addr_set(mad_send_wr, header_mapping, sge[0].addr);
-
- sge[1].addr = dma_map_single(mad_agent->device->dma_device,
- ib_get_payload(mad_send_wr),
- sge[1].length,
- DMA_TO_DEVICE);
- pci_unmap_addr_set(mad_send_wr, payload_mapping, sge[1].addr);
+ sge[0].addr = ib_dma_map_single(mad_agent->device,
+ mad_send_wr->send_buf.mad,
+ sge[0].length,
+ DMA_TO_DEVICE);
+ mad_send_wr->header_mapping = sge[0].addr;
+
+ sge[1].addr = ib_dma_map_single(mad_agent->device,
+ ib_get_payload(mad_send_wr),
+ sge[1].length,
+ DMA_TO_DEVICE);
+ mad_send_wr->payload_mapping = sge[1].addr;
spin_lock_irqsave(&qp_info->send_queue.lock, flags);
if (qp_info->send_queue.count < qp_info->send_queue.max_active) {
}
spin_unlock_irqrestore(&qp_info->send_queue.lock, flags);
if (ret) {
- dma_unmap_single(mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, header_mapping),
- sge[0].length, DMA_TO_DEVICE);
- dma_unmap_single(mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, payload_mapping),
- sge[1].length, DMA_TO_DEVICE);
+ ib_dma_unmap_single(mad_agent->device,
+ mad_send_wr->header_mapping,
+ sge[0].length, DMA_TO_DEVICE);
+ ib_dma_unmap_single(mad_agent->device,
+ mad_send_wr->payload_mapping,
+ sge[1].length, DMA_TO_DEVICE);
}
return ret;
}
mad_priv_hdr = container_of(mad_list, struct ib_mad_private_header,
mad_list);
recv = container_of(mad_priv_hdr, struct ib_mad_private, header);
- dma_unmap_single(port_priv->device->dma_device,
- pci_unmap_addr(&recv->header, mapping),
- sizeof(struct ib_mad_private) -
- sizeof(struct ib_mad_private_header),
- DMA_FROM_DEVICE);
+ ib_dma_unmap_single(port_priv->device,
+ recv->header.mapping,
+ sizeof(struct ib_mad_private) -
+ sizeof(struct ib_mad_private_header),
+ DMA_FROM_DEVICE);
/* Setup MAD receive work completion from "normal" work completion */
recv->header.wc = *wc;
qp_info = send_queue->qp_info;
retry:
- dma_unmap_single(mad_send_wr->send_buf.mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, header_mapping),
- mad_send_wr->sg_list[0].length, DMA_TO_DEVICE);
- dma_unmap_single(mad_send_wr->send_buf.mad_agent->device->dma_device,
- pci_unmap_addr(mad_send_wr, payload_mapping),
- mad_send_wr->sg_list[1].length, DMA_TO_DEVICE);
+ ib_dma_unmap_single(mad_send_wr->send_buf.mad_agent->device,
+ mad_send_wr->header_mapping,
+ mad_send_wr->sg_list[0].length, DMA_TO_DEVICE);
+ ib_dma_unmap_single(mad_send_wr->send_buf.mad_agent->device,
+ mad_send_wr->payload_mapping,
+ mad_send_wr->sg_list[1].length, DMA_TO_DEVICE);
queued_send_wr = NULL;
spin_lock_irqsave(&send_queue->lock, flags);
list_del(&mad_list->list);
break;
}
}
- sg_list.addr = dma_map_single(qp_info->port_priv->
- device->dma_device,
- &mad_priv->grh,
- sizeof *mad_priv -
- sizeof mad_priv->header,
- DMA_FROM_DEVICE);
- pci_unmap_addr_set(&mad_priv->header, mapping, sg_list.addr);
+ sg_list.addr = ib_dma_map_single(qp_info->port_priv->device,
+ &mad_priv->grh,
+ sizeof *mad_priv -
+ sizeof mad_priv->header,
+ DMA_FROM_DEVICE);
+ mad_priv->header.mapping = sg_list.addr;
recv_wr.wr_id = (unsigned long)&mad_priv->header.mad_list;
mad_priv->header.mad_list.mad_queue = recv_queue;
list_del(&mad_priv->header.mad_list.list);
recv_queue->count--;
spin_unlock_irqrestore(&recv_queue->lock, flags);
- dma_unmap_single(qp_info->port_priv->device->dma_device,
- pci_unmap_addr(&mad_priv->header,
- mapping),
- sizeof *mad_priv -
- sizeof mad_priv->header,
- DMA_FROM_DEVICE);
+ ib_dma_unmap_single(qp_info->port_priv->device,
+ mad_priv->header.mapping,
+ sizeof *mad_priv -
+ sizeof mad_priv->header,
+ DMA_FROM_DEVICE);
kmem_cache_free(ib_mad_cache, mad_priv);
printk(KERN_ERR PFX "ib_post_recv failed: %d\n", ret);
break;
/* Remove from posted receive MAD list */
list_del(&mad_list->list);
- dma_unmap_single(qp_info->port_priv->device->dma_device,
- pci_unmap_addr(&recv->header, mapping),
- sizeof(struct ib_mad_private) -
- sizeof(struct ib_mad_private_header),
- DMA_FROM_DEVICE);
+ ib_dma_unmap_single(qp_info->port_priv->device,
+ recv->header.mapping,
+ sizeof(struct ib_mad_private) -
+ sizeof(struct ib_mad_private_header),
+ DMA_FROM_DEVICE);
kmem_cache_free(ib_mad_cache, recv);
}
struct ib_mad_list_head mad_list;
struct ib_mad_recv_wc recv_wc;
struct ib_wc wc;
- DECLARE_PCI_UNMAP_ADDR(mapping)
+ u64 mapping;
} __attribute__ ((packed));
struct ib_mad_private {
struct list_head agent_list;
struct ib_mad_agent_private *mad_agent_priv;
struct ib_mad_send_buf send_buf;
- DECLARE_PCI_UNMAP_ADDR(header_mapping)
- DECLARE_PCI_UNMAP_ADDR(payload_mapping)
+ u64 header_mapping;
+ u64 payload_mapping;
struct ib_send_wr send_wr;
struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG];
__be64 tid;
--- /dev/null
+/*
+ * Copyright (c) 2005-2006 Intel Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+#include <linux/idr.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+#include <linux/miscdevice.h>
+
+#include <rdma/rdma_user_cm.h>
+#include <rdma/ib_marshall.h>
+#include <rdma/rdma_cm.h>
+
+MODULE_AUTHOR("Sean Hefty");
+MODULE_DESCRIPTION("RDMA Userspace Connection Manager Access");
+MODULE_LICENSE("Dual BSD/GPL");
+
+enum {
+ UCMA_MAX_BACKLOG = 128
+};
+
+struct ucma_file {
+ struct mutex mut;
+ struct file *filp;
+ struct list_head ctx_list;
+ struct list_head event_list;
+ wait_queue_head_t poll_wait;
+};
+
+struct ucma_context {
+ int id;
+ struct completion comp;
+ atomic_t ref;
+ int events_reported;
+ int backlog;
+
+ struct ucma_file *file;
+ struct rdma_cm_id *cm_id;
+ u64 uid;
+
+ struct list_head list;
+};
+
+struct ucma_event {
+ struct ucma_context *ctx;
+ struct list_head list;
+ struct rdma_cm_id *cm_id;
+ struct rdma_ucm_event_resp resp;
+};
+
+static DEFINE_MUTEX(mut);
+static DEFINE_IDR(ctx_idr);
+
+static inline struct ucma_context *_ucma_find_context(int id,
+ struct ucma_file *file)
+{
+ struct ucma_context *ctx;
+
+ ctx = idr_find(&ctx_idr, id);
+ if (!ctx)
+ ctx = ERR_PTR(-ENOENT);
+ else if (ctx->file != file)
+ ctx = ERR_PTR(-EINVAL);
+ return ctx;
+}
+
+static struct ucma_context *ucma_get_ctx(struct ucma_file *file, int id)
+{
+ struct ucma_context *ctx;
+
+ mutex_lock(&mut);
+ ctx = _ucma_find_context(id, file);
+ if (!IS_ERR(ctx))
+ atomic_inc(&ctx->ref);
+ mutex_unlock(&mut);
+ return ctx;
+}
+
+static void ucma_put_ctx(struct ucma_context *ctx)
+{
+ if (atomic_dec_and_test(&ctx->ref))
+ complete(&ctx->comp);
+}
+
+static struct ucma_context *ucma_alloc_ctx(struct ucma_file *file)
+{
+ struct ucma_context *ctx;
+ int ret;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return NULL;
+
+ atomic_set(&ctx->ref, 1);
+ init_completion(&ctx->comp);
+ ctx->file = file;
+
+ do {
+ ret = idr_pre_get(&ctx_idr, GFP_KERNEL);
+ if (!ret)
+ goto error;
+
+ mutex_lock(&mut);
+ ret = idr_get_new(&ctx_idr, ctx, &ctx->id);
+ mutex_unlock(&mut);
+ } while (ret == -EAGAIN);
+
+ if (ret)
+ goto error;
+
+ list_add_tail(&ctx->list, &file->ctx_list);
+ return ctx;
+
+error:
+ kfree(ctx);
+ return NULL;
+}
+
+static void ucma_copy_conn_event(struct rdma_ucm_conn_param *dst,
+ struct rdma_conn_param *src)
+{
+ if (src->private_data_len)
+ memcpy(dst->private_data, src->private_data,
+ src->private_data_len);
+ dst->private_data_len = src->private_data_len;
+ dst->responder_resources =src->responder_resources;
+ dst->initiator_depth = src->initiator_depth;
+ dst->flow_control = src->flow_control;
+ dst->retry_count = src->retry_count;
+ dst->rnr_retry_count = src->rnr_retry_count;
+ dst->srq = src->srq;
+ dst->qp_num = src->qp_num;
+}
+
+static void ucma_copy_ud_event(struct rdma_ucm_ud_param *dst,
+ struct rdma_ud_param *src)
+{
+ if (src->private_data_len)
+ memcpy(dst->private_data, src->private_data,
+ src->private_data_len);
+ dst->private_data_len = src->private_data_len;
+ ib_copy_ah_attr_to_user(&dst->ah_attr, &src->ah_attr);
+ dst->qp_num = src->qp_num;
+ dst->qkey = src->qkey;
+}
+
+static void ucma_set_event_context(struct ucma_context *ctx,
+ struct rdma_cm_event *event,
+ struct ucma_event *uevent)
+{
+ uevent->ctx = ctx;
+ uevent->resp.uid = ctx->uid;
+ uevent->resp.id = ctx->id;
+}
+
+static int ucma_event_handler(struct rdma_cm_id *cm_id,
+ struct rdma_cm_event *event)
+{
+ struct ucma_event *uevent;
+ struct ucma_context *ctx = cm_id->context;
+ int ret = 0;
+
+ uevent = kzalloc(sizeof(*uevent), GFP_KERNEL);
+ if (!uevent)
+ return event->event == RDMA_CM_EVENT_CONNECT_REQUEST;
+
+ uevent->cm_id = cm_id;
+ ucma_set_event_context(ctx, event, uevent);
+ uevent->resp.event = event->event;
+ uevent->resp.status = event->status;
+ if (cm_id->ps == RDMA_PS_UDP)
+ ucma_copy_ud_event(&uevent->resp.param.ud, &event->param.ud);
+ else
+ ucma_copy_conn_event(&uevent->resp.param.conn,
+ &event->param.conn);
+
+ mutex_lock(&ctx->file->mut);
+ if (event->event == RDMA_CM_EVENT_CONNECT_REQUEST) {
+ if (!ctx->backlog) {
+ ret = -EDQUOT;
+ goto out;
+ }
+ ctx->backlog--;
+ }
+ list_add_tail(&uevent->list, &ctx->file->event_list);
+ wake_up_interruptible(&ctx->file->poll_wait);
+out:
+ mutex_unlock(&ctx->file->mut);
+ return ret;
+}
+
+static ssize_t ucma_get_event(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct ucma_context *ctx;
+ struct rdma_ucm_get_event cmd;
+ struct ucma_event *uevent;
+ int ret = 0;
+ DEFINE_WAIT(wait);
+
+ if (out_len < sizeof uevent->resp)
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ mutex_lock(&file->mut);
+ while (list_empty(&file->event_list)) {
+ if (file->filp->f_flags & O_NONBLOCK) {
+ ret = -EAGAIN;
+ break;
+ }
+
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+
+ prepare_to_wait(&file->poll_wait, &wait, TASK_INTERRUPTIBLE);
+ mutex_unlock(&file->mut);
+ schedule();
+ mutex_lock(&file->mut);
+ finish_wait(&file->poll_wait, &wait);
+ }
+
+ if (ret)
+ goto done;
+
+ uevent = list_entry(file->event_list.next, struct ucma_event, list);
+
+ if (uevent->resp.event == RDMA_CM_EVENT_CONNECT_REQUEST) {
+ ctx = ucma_alloc_ctx(file);
+ if (!ctx) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ uevent->ctx->backlog++;
+ ctx->cm_id = uevent->cm_id;
+ ctx->cm_id->context = ctx;
+ uevent->resp.id = ctx->id;
+ }
+
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &uevent->resp, sizeof uevent->resp)) {
+ ret = -EFAULT;
+ goto done;
+ }
+
+ list_del(&uevent->list);
+ uevent->ctx->events_reported++;
+ kfree(uevent);
+done:
+ mutex_unlock(&file->mut);
+ return ret;
+}
+
+static ssize_t ucma_create_id(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_create_id cmd;
+ struct rdma_ucm_create_id_resp resp;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ mutex_lock(&file->mut);
+ ctx = ucma_alloc_ctx(file);
+ mutex_unlock(&file->mut);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->uid = cmd.uid;
+ ctx->cm_id = rdma_create_id(ucma_event_handler, ctx, cmd.ps);
+ if (IS_ERR(ctx->cm_id)) {
+ ret = PTR_ERR(ctx->cm_id);
+ goto err1;
+ }
+
+ resp.id = ctx->id;
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp))) {
+ ret = -EFAULT;
+ goto err2;
+ }
+ return 0;
+
+err2:
+ rdma_destroy_id(ctx->cm_id);
+err1:
+ mutex_lock(&mut);
+ idr_remove(&ctx_idr, ctx->id);
+ mutex_unlock(&mut);
+ kfree(ctx);
+ return ret;
+}
+
+static void ucma_cleanup_events(struct ucma_context *ctx)
+{
+ struct ucma_event *uevent, *tmp;
+
+ list_for_each_entry_safe(uevent, tmp, &ctx->file->event_list, list) {
+ if (uevent->ctx != ctx)
+ continue;
+
+ list_del(&uevent->list);
+
+ /* clear incoming connections. */
+ if (uevent->resp.event == RDMA_CM_EVENT_CONNECT_REQUEST)
+ rdma_destroy_id(uevent->cm_id);
+
+ kfree(uevent);
+ }
+}
+
+static int ucma_free_ctx(struct ucma_context *ctx)
+{
+ int events_reported;
+
+ /* No new events will be generated after destroying the id. */
+ rdma_destroy_id(ctx->cm_id);
+
+ /* Cleanup events not yet reported to the user. */
+ mutex_lock(&ctx->file->mut);
+ ucma_cleanup_events(ctx);
+ list_del(&ctx->list);
+ mutex_unlock(&ctx->file->mut);
+
+ events_reported = ctx->events_reported;
+ kfree(ctx);
+ return events_reported;
+}
+
+static ssize_t ucma_destroy_id(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_destroy_id cmd;
+ struct rdma_ucm_destroy_id_resp resp;
+ struct ucma_context *ctx;
+ int ret = 0;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ mutex_lock(&mut);
+ ctx = _ucma_find_context(cmd.id, file);
+ if (!IS_ERR(ctx))
+ idr_remove(&ctx_idr, ctx->id);
+ mutex_unlock(&mut);
+
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ucma_put_ctx(ctx);
+ wait_for_completion(&ctx->comp);
+ resp.events_reported = ucma_free_ctx(ctx);
+
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp)))
+ ret = -EFAULT;
+
+ return ret;
+}
+
+static ssize_t ucma_bind_addr(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_bind_addr cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_bind_addr(ctx->cm_id, (struct sockaddr *) &cmd.addr);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_resolve_addr(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_resolve_addr cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr,
+ (struct sockaddr *) &cmd.dst_addr,
+ cmd.timeout_ms);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_resolve_route(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_resolve_route cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_resolve_route(ctx->cm_id, cmd.timeout_ms);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static void ucma_copy_ib_route(struct rdma_ucm_query_route_resp *resp,
+ struct rdma_route *route)
+{
+ struct rdma_dev_addr *dev_addr;
+
+ resp->num_paths = route->num_paths;
+ switch (route->num_paths) {
+ case 0:
+ dev_addr = &route->addr.dev_addr;
+ ib_addr_get_dgid(dev_addr,
+ (union ib_gid *) &resp->ib_route[0].dgid);
+ ib_addr_get_sgid(dev_addr,
+ (union ib_gid *) &resp->ib_route[0].sgid);
+ resp->ib_route[0].pkey = cpu_to_be16(ib_addr_get_pkey(dev_addr));
+ break;
+ case 2:
+ ib_copy_path_rec_to_user(&resp->ib_route[1],
+ &route->path_rec[1]);
+ /* fall through */
+ case 1:
+ ib_copy_path_rec_to_user(&resp->ib_route[0],
+ &route->path_rec[0]);
+ break;
+ default:
+ break;
+ }
+}
+
+static ssize_t ucma_query_route(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_query_route cmd;
+ struct rdma_ucm_query_route_resp resp;
+ struct ucma_context *ctx;
+ struct sockaddr *addr;
+ int ret = 0;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ memset(&resp, 0, sizeof resp);
+ addr = &ctx->cm_id->route.addr.src_addr;
+ memcpy(&resp.src_addr, addr, addr->sa_family == AF_INET ?
+ sizeof(struct sockaddr_in) :
+ sizeof(struct sockaddr_in6));
+ addr = &ctx->cm_id->route.addr.dst_addr;
+ memcpy(&resp.dst_addr, addr, addr->sa_family == AF_INET ?
+ sizeof(struct sockaddr_in) :
+ sizeof(struct sockaddr_in6));
+ if (!ctx->cm_id->device)
+ goto out;
+
+ resp.node_guid = ctx->cm_id->device->node_guid;
+ resp.port_num = ctx->cm_id->port_num;
+ switch (rdma_node_get_transport(ctx->cm_id->device->node_type)) {
+ case RDMA_TRANSPORT_IB:
+ ucma_copy_ib_route(&resp, &ctx->cm_id->route);
+ break;
+ default:
+ break;
+ }
+
+out:
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp)))
+ ret = -EFAULT;
+
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static void ucma_copy_conn_param(struct rdma_conn_param *dst,
+ struct rdma_ucm_conn_param *src)
+{
+ dst->private_data = src->private_data;
+ dst->private_data_len = src->private_data_len;
+ dst->responder_resources =src->responder_resources;
+ dst->initiator_depth = src->initiator_depth;
+ dst->flow_control = src->flow_control;
+ dst->retry_count = src->retry_count;
+ dst->rnr_retry_count = src->rnr_retry_count;
+ dst->srq = src->srq;
+ dst->qp_num = src->qp_num;
+}
+
+static ssize_t ucma_connect(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_connect cmd;
+ struct rdma_conn_param conn_param;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ if (!cmd.conn_param.valid)
+ return -EINVAL;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ucma_copy_conn_param(&conn_param, &cmd.conn_param);
+ ret = rdma_connect(ctx->cm_id, &conn_param);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_listen(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_listen cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ctx->backlog = cmd.backlog > 0 && cmd.backlog < UCMA_MAX_BACKLOG ?
+ cmd.backlog : UCMA_MAX_BACKLOG;
+ ret = rdma_listen(ctx->cm_id, ctx->backlog);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_accept(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_accept cmd;
+ struct rdma_conn_param conn_param;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ if (cmd.conn_param.valid) {
+ ctx->uid = cmd.uid;
+ ucma_copy_conn_param(&conn_param, &cmd.conn_param);
+ ret = rdma_accept(ctx->cm_id, &conn_param);
+ } else
+ ret = rdma_accept(ctx->cm_id, NULL);
+
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_reject(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_reject cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_reject(ctx->cm_id, cmd.private_data, cmd.private_data_len);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_disconnect(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_disconnect cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_disconnect(ctx->cm_id);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_init_qp_attr(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_init_qp_attr cmd;
+ struct ib_uverbs_qp_attr resp;
+ struct ucma_context *ctx;
+ struct ib_qp_attr qp_attr;
+ int ret;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ resp.qp_attr_mask = 0;
+ memset(&qp_attr, 0, sizeof qp_attr);
+ qp_attr.qp_state = cmd.qp_state;
+ ret = rdma_init_qp_attr(ctx->cm_id, &qp_attr, &resp.qp_attr_mask);
+ if (ret)
+ goto out;
+
+ ib_copy_qp_attr_to_user(&resp, &qp_attr);
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp)))
+ ret = -EFAULT;
+
+out:
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_notify(struct ucma_file *file, const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_notify cmd;
+ struct ucma_context *ctx;
+ int ret;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ ret = rdma_notify(ctx->cm_id, (enum ib_event_type) cmd.event);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t (*ucma_cmd_table[])(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len) = {
+ [RDMA_USER_CM_CMD_CREATE_ID] = ucma_create_id,
+ [RDMA_USER_CM_CMD_DESTROY_ID] = ucma_destroy_id,
+ [RDMA_USER_CM_CMD_BIND_ADDR] = ucma_bind_addr,
+ [RDMA_USER_CM_CMD_RESOLVE_ADDR] = ucma_resolve_addr,
+ [RDMA_USER_CM_CMD_RESOLVE_ROUTE]= ucma_resolve_route,
+ [RDMA_USER_CM_CMD_QUERY_ROUTE] = ucma_query_route,
+ [RDMA_USER_CM_CMD_CONNECT] = ucma_connect,
+ [RDMA_USER_CM_CMD_LISTEN] = ucma_listen,
+ [RDMA_USER_CM_CMD_ACCEPT] = ucma_accept,
+ [RDMA_USER_CM_CMD_REJECT] = ucma_reject,
+ [RDMA_USER_CM_CMD_DISCONNECT] = ucma_disconnect,
+ [RDMA_USER_CM_CMD_INIT_QP_ATTR] = ucma_init_qp_attr,
+ [RDMA_USER_CM_CMD_GET_EVENT] = ucma_get_event,
+ [RDMA_USER_CM_CMD_GET_OPTION] = NULL,
+ [RDMA_USER_CM_CMD_SET_OPTION] = NULL,
+ [RDMA_USER_CM_CMD_NOTIFY] = ucma_notify,
+};
+
+static ssize_t ucma_write(struct file *filp, const char __user *buf,
+ size_t len, loff_t *pos)
+{
+ struct ucma_file *file = filp->private_data;
+ struct rdma_ucm_cmd_hdr hdr;
+ ssize_t ret;
+
+ if (len < sizeof(hdr))
+ return -EINVAL;
+
+ if (copy_from_user(&hdr, buf, sizeof(hdr)))
+ return -EFAULT;
+
+ if (hdr.cmd < 0 || hdr.cmd >= ARRAY_SIZE(ucma_cmd_table))
+ return -EINVAL;
+
+ if (hdr.in + sizeof(hdr) > len)
+ return -EINVAL;
+
+ if (!ucma_cmd_table[hdr.cmd])
+ return -ENOSYS;
+
+ ret = ucma_cmd_table[hdr.cmd](file, buf + sizeof(hdr), hdr.in, hdr.out);
+ if (!ret)
+ ret = len;
+
+ return ret;
+}
+
+static unsigned int ucma_poll(struct file *filp, struct poll_table_struct *wait)
+{
+ struct ucma_file *file = filp->private_data;
+ unsigned int mask = 0;
+
+ poll_wait(filp, &file->poll_wait, wait);
+
+ if (!list_empty(&file->event_list))
+ mask = POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+static int ucma_open(struct inode *inode, struct file *filp)
+{
+ struct ucma_file *file;
+
+ file = kmalloc(sizeof *file, GFP_KERNEL);
+ if (!file)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&file->event_list);
+ INIT_LIST_HEAD(&file->ctx_list);
+ init_waitqueue_head(&file->poll_wait);
+ mutex_init(&file->mut);
+
+ filp->private_data = file;
+ file->filp = filp;
+ return 0;
+}
+
+static int ucma_close(struct inode *inode, struct file *filp)
+{
+ struct ucma_file *file = filp->private_data;
+ struct ucma_context *ctx, *tmp;
+
+ mutex_lock(&file->mut);
+ list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) {
+ mutex_unlock(&file->mut);
+
+ mutex_lock(&mut);
+ idr_remove(&ctx_idr, ctx->id);
+ mutex_unlock(&mut);
+
+ ucma_free_ctx(ctx);
+ mutex_lock(&file->mut);
+ }
+ mutex_unlock(&file->mut);
+ kfree(file);
+ return 0;
+}
+
+static struct file_operations ucma_fops = {
+ .owner = THIS_MODULE,
+ .open = ucma_open,
+ .release = ucma_close,
+ .write = ucma_write,
+ .poll = ucma_poll,
+};
+
+static struct miscdevice ucma_misc = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "rdma_cm",
+ .fops = &ucma_fops,
+};
+
+static ssize_t show_abi_version(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", RDMA_USER_CM_ABI_VERSION);
+}
+static DEVICE_ATTR(abi_version, S_IRUGO, show_abi_version, NULL);
+
+static int __init ucma_init(void)
+{
+ int ret;
+
+ ret = misc_register(&ucma_misc);
+ if (ret)
+ return ret;
+
+ ret = device_create_file(ucma_misc.this_device, &dev_attr_abi_version);
+ if (ret) {
+ printk(KERN_ERR "rdma_ucm: couldn't create abi_version attr\n");
+ goto err;
+ }
+ return 0;
+err:
+ misc_deregister(&ucma_misc);
+ return ret;
+}
+
+static void __exit ucma_cleanup(void)
+{
+ device_remove_file(ucma_misc.this_device, &dev_attr_abi_version);
+ misc_deregister(&ucma_misc);
+ idr_destroy(&ctx_idr);
+}
+
+module_init(ucma_init);
+module_exit(ucma_cleanup);
* module reference.
*/
filp->f_op = fops_get(&uverbs_event_fops);
- filp->f_vfsmnt = mntget(uverbs_event_mnt);
- filp->f_dentry = dget(uverbs_event_mnt->mnt_root);
- filp->f_mapping = filp->f_dentry->d_inode->i_mapping;
+ filp->f_path.mnt = mntget(uverbs_event_mnt);
+ filp->f_path.dentry = dget(uverbs_event_mnt->mnt_root);
+ filp->f_mapping = filp->f_path.dentry->d_inode->i_mapping;
filp->f_flags = O_RDONLY;
filp->f_mode = FMODE_READ;
filp->private_data = ev_file;
#include <rdma/ib_marshall.h>
-static void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
- struct ib_ah_attr *src)
+void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
+ struct ib_ah_attr *src)
{
memcpy(dst->grh.dgid, src->grh.dgid.raw, sizeof src->grh.dgid);
dst->grh.flow_label = src->grh.flow_label;
dst->is_global = src->ah_flags & IB_AH_GRH ? 1 : 0;
dst->port_num = src->port_num;
}
+EXPORT_SYMBOL(ib_copy_ah_attr_to_user);
void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
struct ib_qp_attr *src)
int i;
list_for_each_entry_safe(chunk, tmp, &umem->chunk_list, list) {
- dma_unmap_sg(dev->dma_device, chunk->page_list,
- chunk->nents, DMA_BIDIRECTIONAL);
+ ib_dma_unmap_sg(dev, chunk->page_list,
+ chunk->nents, DMA_BIDIRECTIONAL);
for (i = 0; i < chunk->nents; ++i) {
if (umem->writable && dirty)
set_page_dirty_lock(chunk->page_list[i].page);
chunk->page_list[i].length = PAGE_SIZE;
}
- chunk->nmap = dma_map_sg(dev->dma_device,
- &chunk->page_list[0],
- chunk->nents,
- DMA_BIDIRECTIONAL);
+ chunk->nmap = ib_dma_map_sg(dev,
+ &chunk->page_list[0],
+ chunk->nents,
+ DMA_BIDIRECTIONAL);
if (chunk->nmap <= 0) {
for (i = 0; i < chunk->nents; ++i)
put_page(chunk->page_list[i].page);
if (attr_mask & IB_QP_STATE) {
/* Ensure the state is valid */
- if (attr->qp_state < 0 || attr->qp_state > IB_QPS_ERR)
- return -EINVAL;
+ if (attr->qp_state < 0 || attr->qp_state > IB_QPS_ERR) {
+ err = -EINVAL;
+ goto bail0;
+ }
wr.next_qp_state = cpu_to_be32(to_c2_state(attr->qp_state));
if (attr->cur_qp_state != IB_QPS_RTR &&
attr->cur_qp_state != IB_QPS_RTS &&
attr->cur_qp_state != IB_QPS_SQD &&
- attr->cur_qp_state != IB_QPS_SQE)
- return -EINVAL;
- else
+ attr->cur_qp_state != IB_QPS_SQE) {
+ err = -EINVAL;
+ goto bail0;
+ } else
wr.next_qp_state =
cpu_to_be32(to_c2_state(attr->cur_qp_state));
ib_ipath-y := \
ipath_cq.o \
ipath_diag.o \
+ ipath_dma.o \
ipath_driver.o \
ipath_eeprom.o \
ipath_file_ops.o \
--- /dev/null
+/*
+ * Copyright (c) 2006 QLogic, Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <rdma/ib_verbs.h>
+
+#include "ipath_verbs.h"
+
+#define BAD_DMA_ADDRESS ((u64) 0)
+
+/*
+ * The following functions implement driver specific replacements
+ * for the ib_dma_*() functions.
+ *
+ * These functions return kernel virtual addresses instead of
+ * device bus addresses since the driver uses the CPU to copy
+ * data instead of using hardware DMA.
+ */
+
+static int ipath_mapping_error(struct ib_device *dev, u64 dma_addr)
+{
+ return dma_addr == BAD_DMA_ADDRESS;
+}
+
+static u64 ipath_dma_map_single(struct ib_device *dev,
+ void *cpu_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+ return (u64) cpu_addr;
+}
+
+static void ipath_dma_unmap_single(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+static u64 ipath_dma_map_page(struct ib_device *dev,
+ struct page *page,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ u64 addr;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ if (offset + size > PAGE_SIZE) {
+ addr = BAD_DMA_ADDRESS;
+ goto done;
+ }
+
+ addr = (u64) page_address(page);
+ if (addr)
+ addr += offset;
+ /* TODO: handle highmem pages */
+
+done:
+ return addr;
+}
+
+static void ipath_dma_unmap_page(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+int ipath_map_sg(struct ib_device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ u64 addr;
+ int i;
+ int ret = nents;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ for (i = 0; i < nents; i++) {
+ addr = (u64) page_address(sg[i].page);
+ /* TODO: handle highmem pages */
+ if (!addr) {
+ ret = 0;
+ break;
+ }
+ }
+ return ret;
+}
+
+static void ipath_unmap_sg(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+static u64 ipath_sg_dma_address(struct ib_device *dev, struct scatterlist *sg)
+{
+ u64 addr = (u64) page_address(sg->page);
+
+ if (addr)
+ addr += sg->offset;
+ return addr;
+}
+
+static unsigned int ipath_sg_dma_len(struct ib_device *dev,
+ struct scatterlist *sg)
+{
+ return sg->length;
+}
+
+static void ipath_sync_single_for_cpu(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+}
+
+static void ipath_sync_single_for_device(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+}
+
+static void *ipath_dma_alloc_coherent(struct ib_device *dev, size_t size,
+ u64 *dma_handle, gfp_t flag)
+{
+ struct page *p;
+ void *addr = NULL;
+
+ p = alloc_pages(flag, get_order(size));
+ if (p)
+ addr = page_address(p);
+ if (dma_handle)
+ *dma_handle = (u64) addr;
+ return addr;
+}
+
+static void ipath_dma_free_coherent(struct ib_device *dev, size_t size,
+ void *cpu_addr, dma_addr_t dma_handle)
+{
+ free_pages((unsigned long) cpu_addr, get_order(size));
+}
+
+struct ib_dma_mapping_ops ipath_dma_mapping_ops = {
+ ipath_mapping_error,
+ ipath_dma_map_single,
+ ipath_dma_unmap_single,
+ ipath_dma_map_page,
+ ipath_dma_unmap_page,
+ ipath_map_sg,
+ ipath_unmap_sg,
+ ipath_sg_dma_address,
+ ipath_sg_dma_len,
+ ipath_sync_single_for_cpu,
+ ipath_sync_single_for_device,
+ ipath_dma_alloc_coherent,
+ ipath_dma_free_coherent
+};
*/
void ipath_shutdown_device(struct ipath_devdata *dd)
{
- u64 val;
-
ipath_dbg("Shutting down the device\n");
dd->ipath_flags |= IPATH_LINKUNK;
*/
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0ULL);
/* flush it */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
/*
* enough for anything that's going to trickle out to have actually
* done so.
int start_stop)
{
struct ipath_devdata *dd = pd->port_dd;
- u64 tval;
ipath_cdbg(PROC, "%sabling rcv for unit %u port %u:%u\n",
start_stop ? "en" : "dis", dd->ipath_unit,
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl);
/* now be sure chip saw it before we return */
- tval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
if (start_stop) {
/*
* And try to be sure that tail reg update has happened too.
* in memory copy, since we could overwrite an update by the
* chip if we did.
*/
- tval = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
+ ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
}
/* always; new head should be equal to new tail; see above */
bail:
goto done;
}
- i_minor = iminor(fp->f_dentry->d_inode) - IPATH_USER_MINOR_BASE;
+ i_minor = iminor(fp->f_path.dentry->d_inode) - IPATH_USER_MINOR_BASE;
ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n",
- (long)fp->f_dentry->d_inode->i_rdev, i_minor);
+ (long)fp->f_path.dentry->d_inode->i_rdev, i_minor);
if (i_minor)
ret = find_free_port(i_minor - 1, fp, uinfo);
u16 i;
struct ipath_devdata *dd;
- dd = file->f_dentry->d_inode->i_private;
+ dd = file->f_path.dentry->d_inode->i_private;
for (i = 0; i < NUM_COUNTERS; i++)
counters[i] = ipath_snap_cntr(dd, i);
struct ipath_devdata *dd;
u64 guid;
- dd = file->f_dentry->d_inode->i_private;
+ dd = file->f_path.dentry->d_inode->i_private;
guid = be64_to_cpu(dd->ipath_guid);
u32 tmp, tmp2;
struct ipath_devdata *dd;
- dd = file->f_dentry->d_inode->i_private;
+ dd = file->f_path.dentry->d_inode->i_private;
/* so we only initialize non-zero fields. */
memset(portinfo, 0, sizeof portinfo);
goto bail;
}
- dd = file->f_dentry->d_inode->i_private;
+ dd = file->f_path.dentry->d_inode->i_private;
if (ipath_eeprom_read(dd, pos, tmp, count)) {
ipath_dev_err(dd, "failed to read from flash\n");
ret = -ENXIO;
goto bail_tmp;
}
- dd = file->f_dentry->d_inode->i_private;
+ dd = file->f_path.dentry->d_inode->i_private;
if (ipath_eeprom_write(dd, pos, tmp, count)) {
ret = -ENXIO;
ipath_dev_err(dd, "failed to write to flash\n");
static int ipath_ht_early_init(struct ipath_devdata *dd)
{
u32 __iomem *piobuf;
- u32 pioincr, val32, egrsize;
+ u32 pioincr, val32;
int i;
/*
* errors interrupts if we ever see one).
*/
dd->ipath_rcvegrbufsize = dd->ipath_piosize2k;
- egrsize = dd->ipath_rcvegrbufsize;
/*
* the min() check here is currently a nop, but it may not
*/
static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
{
- u64 val, tmp, config1, prev_val;
+ u64 val, config1, prev_val;
int ret = 0;
ipath_dbg("Trying to bringup serdes\n");
| INFINIPATH_SERDC0_L1PWR_DN;
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
/* be sure chip saw it */
- tmp = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
udelay(5); /* need pll reset set at least for a bit */
/*
* after PLL is reset, set the per-lane Resets and TxIdle and
"and txidle (%llx)\n", (unsigned long long) val);
ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
/* be sure chip saw it */
- tmp = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
/* need PLL reset clear for at least 11 usec before lane
* resets cleared; give it a few more to be sure */
udelay(15);
int pos, ret;
dd->ipath_msi_lo = 0; /* used as a flag during reset processing */
- dd->ipath_irq = pdev->irq;
ret = pci_enable_msi(dd->pcidev);
if (ret)
ipath_dev_err(dd, "pci_enable_msi failed: %d, "
"interrupts may not work\n", ret);
/* continue even if it fails, we may still be OK... */
+ dd->ipath_irq = pdev->irq;
if ((pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI))) {
u16 control;
static int init_chip_reset(struct ipath_devdata *dd,
struct ipath_portdata **pdp)
{
- struct ipath_portdata *pd;
u32 rtmp;
- *pdp = pd = dd->ipath_pd[0];
+ *pdp = dd->ipath_pd[0];
/* ensure chip does no sends or receives while we re-initialize */
dd->ipath_control = dd->ipath_sendctrl = dd->ipath_rcvctrl = 0U;
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, 0);
* on close
*/
if (errs & INFINIPATH_E_RRCVHDRFULL) {
- int any;
u32 hd, tl;
ipath_stats.sps_hdrqfull++;
- for (any = i = 0; i < dd->ipath_cfgports; i++) {
+ for (i = 0; i < dd->ipath_cfgports; i++) {
struct ipath_portdata *pd = dd->ipath_pd[i];
if (i == 0) {
hd = dd->ipath_port0head;
*/
if (sge->lkey == 0) {
isge->mr = NULL;
- isge->vaddr = bus_to_virt(sge->addr);
+ isge->vaddr = (void *) sge->addr;
isge->length = sge->length;
isge->sge_length = sge->length;
ret = 1;
int ret;
/*
- * We use RKEY == zero for physical addresses
- * (see ipath_get_dma_mr).
+ * We use RKEY == zero for kernel virtual addresses
+ * (see ipath_get_dma_mr and ipath_dma.c).
*/
if (rkey == 0) {
sge->mr = NULL;
- sge->vaddr = phys_to_virt(vaddr);
+ sge->vaddr = (void *) vaddr;
sge->length = len;
sge->sge_length = len;
ss->sg_list = NULL;
* @acc: access flags
*
* Returns the memory region on success, otherwise returns an errno.
+ * Note that all DMA addresses should be created via the
+ * struct ib_dma_mapping_ops functions (see ipath_dma.c).
*/
struct ib_mr *ipath_get_dma_mr(struct ib_pd *pd, int acc)
{
m = 0;
n = 0;
for (i = 0; i < num_phys_buf; i++) {
- mr->mr.map[m]->segs[n].vaddr =
- phys_to_virt(buffer_list[i].addr);
+ mr->mr.map[m]->segs[n].vaddr = (void *) buffer_list[i].addr;
mr->mr.map[m]->segs[n].length = buffer_list[i].size;
mr->mr.length += buffer_list[i].size;
n++;
n = 0;
ps = 1 << fmr->page_shift;
for (i = 0; i < list_len; i++) {
- fmr->mr.map[m]->segs[n].vaddr = phys_to_virt(page_list[i]);
+ fmr->mr.map[m]->segs[n].vaddr = (void *) page_list[i];
fmr->mr.map[m]->segs[n].length = ps;
if (++n == IPATH_SEGSZ) {
m++;
size_t count)
{
struct ipath_devdata *dd = dev_get_drvdata(dev);
- int unit;
u16 mlid;
int ret;
if (ret < 0 || mlid < IPATH_MULTICAST_LID_BASE)
goto invalid;
- unit = dd->ipath_unit;
-
dd->ipath_mlid = mlid;
goto bail;
dev->detach_mcast = ipath_multicast_detach;
dev->process_mad = ipath_process_mad;
dev->mmap = ipath_mmap;
+ dev->dma_ops = &ipath_dma_mapping_ops;
snprintf(dev->node_desc, sizeof(dev->node_desc),
IPATH_IDSTR " %s", init_utsname()->nodename);
extern const u32 ib_ipath_rnr_table[];
+extern struct ib_dma_mapping_ops ipath_dma_mapping_ops;
+
#endif /* IPATH_VERBS_H */
props->max_map_per_fmr = 255;
else
props->max_map_per_fmr =
- (1 << (32 - long_log2(mdev->limits.num_mpts))) - 1;
+ (1 << (32 - ilog2(mdev->limits.num_mpts))) - 1;
err = 0;
out:
lkey = ucmd.lkey;
}
- ret = mthca_RESIZE_CQ(dev, cq->cqn, lkey, long_log2(entries), &status);
+ ret = mthca_RESIZE_CQ(dev, cq->cqn, lkey, ilog2(entries), &status);
if (status)
ret = -EINVAL;
if (mthca_is_memfree(dev)) {
if (qp->rq.max)
- qp_context->rq_size_stride = long_log2(qp->rq.max) << 3;
+ qp_context->rq_size_stride = ilog2(qp->rq.max) << 3;
qp_context->rq_size_stride |= qp->rq.wqe_shift - 4;
if (qp->sq.max)
- qp_context->sq_size_stride = long_log2(qp->sq.max) << 3;
+ qp_context->sq_size_stride = ilog2(qp->sq.max) << 3;
qp_context->sq_size_stride |= qp->sq.wqe_shift - 4;
}
memset(context, 0, sizeof *context);
- logsize = long_log2(srq->max);
+ logsize = ilog2(srq->max);
context->state_logsize_srqn = cpu_to_be32(logsize << 24 | srq->srqn);
context->lkey = cpu_to_be32(srq->mr.ibmr.lkey);
context->db_index = cpu_to_be32(srq->db_index);
if (!mthca_is_memfree(dev) && (ds > dev->limits.max_desc_sz))
return -EINVAL;
- srq->wqe_shift = long_log2(ds);
+ srq->wqe_shift = ilog2(ds);
srq->srqn = mthca_alloc(&dev->srq_table.alloc);
if (srq->srqn == -1)
struct ipoib_rx_buf {
struct sk_buff *skb;
- dma_addr_t mapping;
+ u64 mapping;
};
struct ipoib_tx_buf {
struct sk_buff *skb;
- DECLARE_PCI_UNMAP_ADDR(mapping)
+ u64 mapping;
};
/*
ret = ib_post_recv(priv->qp, ¶m, &bad_wr);
if (unlikely(ret)) {
ipoib_warn(priv, "receive failed for buf %d (%d)\n", id, ret);
- dma_unmap_single(priv->ca->dma_device,
- priv->rx_ring[id].mapping,
- IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
+ ib_dma_unmap_single(priv->ca, priv->rx_ring[id].mapping,
+ IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
dev_kfree_skb_any(priv->rx_ring[id].skb);
priv->rx_ring[id].skb = NULL;
}
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct sk_buff *skb;
- dma_addr_t addr;
+ u64 addr;
skb = dev_alloc_skb(IPOIB_BUF_SIZE + 4);
if (!skb)
*/
skb_reserve(skb, 4);
- addr = dma_map_single(priv->ca->dma_device,
- skb->data, IPOIB_BUF_SIZE,
- DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(addr))) {
+ addr = ib_dma_map_single(priv->ca, skb->data, IPOIB_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ if (unlikely(ib_dma_mapping_error(priv->ca, addr))) {
dev_kfree_skb_any(skb);
return -EIO;
}
struct ipoib_dev_priv *priv = netdev_priv(dev);
unsigned int wr_id = wc->wr_id & ~IPOIB_OP_RECV;
struct sk_buff *skb;
- dma_addr_t addr;
+ u64 addr;
ipoib_dbg_data(priv, "recv completion: id %d, op %d, status: %d\n",
wr_id, wc->opcode, wc->status);
ipoib_warn(priv, "failed recv event "
"(status=%d, wrid=%d vend_err %x)\n",
wc->status, wr_id, wc->vendor_err);
- dma_unmap_single(priv->ca->dma_device, addr,
- IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
+ ib_dma_unmap_single(priv->ca, addr,
+ IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
priv->rx_ring[wr_id].skb = NULL;
return;
ipoib_dbg_data(priv, "received %d bytes, SLID 0x%04x\n",
wc->byte_len, wc->slid);
- dma_unmap_single(priv->ca->dma_device, addr,
- IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
+ ib_dma_unmap_single(priv->ca, addr, IPOIB_BUF_SIZE, DMA_FROM_DEVICE);
skb_put(skb, wc->byte_len);
skb_pull(skb, IB_GRH_BYTES);
tx_req = &priv->tx_ring[wr_id];
- dma_unmap_single(priv->ca->dma_device,
- pci_unmap_addr(tx_req, mapping),
- tx_req->skb->len,
- DMA_TO_DEVICE);
+ ib_dma_unmap_single(priv->ca, tx_req->mapping,
+ tx_req->skb->len, DMA_TO_DEVICE);
++priv->stats.tx_packets;
priv->stats.tx_bytes += tx_req->skb->len;
static inline int post_send(struct ipoib_dev_priv *priv,
unsigned int wr_id,
struct ib_ah *address, u32 qpn,
- dma_addr_t addr, int len)
+ u64 addr, int len)
{
struct ib_send_wr *bad_wr;
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_tx_buf *tx_req;
- dma_addr_t addr;
+ u64 addr;
if (unlikely(skb->len > dev->mtu + INFINIBAND_ALEN)) {
ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
*/
tx_req = &priv->tx_ring[priv->tx_head & (ipoib_sendq_size - 1)];
tx_req->skb = skb;
- addr = dma_map_single(priv->ca->dma_device, skb->data, skb->len,
- DMA_TO_DEVICE);
- if (unlikely(dma_mapping_error(addr))) {
+ addr = ib_dma_map_single(priv->ca, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ if (unlikely(ib_dma_mapping_error(priv->ca, addr))) {
++priv->stats.tx_errors;
dev_kfree_skb_any(skb);
return;
}
- pci_unmap_addr_set(tx_req, mapping, addr);
+ tx_req->mapping = addr;
if (unlikely(post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
address->ah, qpn, addr, skb->len))) {
ipoib_warn(priv, "post_send failed\n");
++priv->stats.tx_errors;
- dma_unmap_single(priv->ca->dma_device, addr, skb->len,
- DMA_TO_DEVICE);
+ ib_dma_unmap_single(priv->ca, addr, skb->len, DMA_TO_DEVICE);
dev_kfree_skb_any(skb);
} else {
dev->trans_start = jiffies;
while ((int) priv->tx_tail - (int) priv->tx_head < 0) {
tx_req = &priv->tx_ring[priv->tx_tail &
(ipoib_sendq_size - 1)];
- dma_unmap_single(priv->ca->dma_device,
- pci_unmap_addr(tx_req, mapping),
- tx_req->skb->len,
- DMA_TO_DEVICE);
+ ib_dma_unmap_single(priv->ca,
+ tx_req->mapping,
+ tx_req->skb->len,
+ DMA_TO_DEVICE);
dev_kfree_skb_any(tx_req->skb);
++priv->tx_tail;
}
- for (i = 0; i < ipoib_recvq_size; ++i)
- if (priv->rx_ring[i].skb) {
- dma_unmap_single(priv->ca->dma_device,
- pci_unmap_addr(&priv->rx_ring[i],
- mapping),
- IPOIB_BUF_SIZE,
- DMA_FROM_DEVICE);
- dev_kfree_skb_any(priv->rx_ring[i].skb);
- priv->rx_ring[i].skb = NULL;
- }
+ for (i = 0; i < ipoib_recvq_size; ++i) {
+ struct ipoib_rx_buf *rx_req;
+
+ rx_req = &priv->rx_ring[i];
+ if (!rx_req->skb)
+ continue;
+ ib_dma_unmap_single(priv->ca,
+ rx_req->mapping,
+ IPOIB_BUF_SIZE,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb_any(rx_req->skb);
+ rx_req->skb = NULL;
+ }
goto timeout;
}
return;
}
- skb_queue_head_init(&neigh->queue);
-
/*
* We can only be called from ipoib_start_xmit, so we're
* inside tx_lock -- no need to save/restore flags.
neigh->neighbour = neighbour;
*to_ipoib_neigh(neighbour) = neigh;
+ skb_queue_head_init(&neigh->queue);
return neigh;
}
struct iser_mem_reg reg; /* memory registration info */
void *virt_addr;
struct iser_device *device; /* device->device for dma_unmap */
- dma_addr_t dma_addr; /* if non zero, addr for dma_unmap */
+ u64 dma_addr; /* if non zero, addr for dma_unmap */
enum dma_data_direction direction; /* direction for dma_unmap */
unsigned int data_size;
atomic_t ref_count; /* refcount, freed when dec to 0 */
struct iscsi_iser_conn *iser_conn = conn->dd_data;
struct iser_desc *mdesc = mtask->dd_data;
struct iser_dto *send_dto = NULL;
- unsigned int itt;
unsigned long data_seg_len;
int err = 0;
- unsigned char opcode;
struct iser_regd_buf *regd_buf;
struct iser_device *device;
iser_reg_single(device, send_dto->regd[0], DMA_TO_DEVICE);
- itt = ntohl(mtask->hdr->itt);
- opcode = mtask->hdr->opcode & ISCSI_OPCODE_MASK;
data_seg_len = ntoh24(mtask->hdr->dlength);
if (data_seg_len > 0) {
*/
int iser_regd_buff_release(struct iser_regd_buf *regd_buf)
{
- struct device *dma_device;
+ struct ib_device *dev;
if ((atomic_read(®d_buf->ref_count) == 0) ||
atomic_dec_and_test(®d_buf->ref_count)) {
iser_unreg_mem(®d_buf->reg);
if (regd_buf->dma_addr) {
- dma_device = regd_buf->device->ib_device->dma_device;
- dma_unmap_single(dma_device,
+ dev = regd_buf->device->ib_device;
+ ib_dma_unmap_single(dev,
regd_buf->dma_addr,
regd_buf->data_size,
regd_buf->direction);
struct iser_regd_buf *regd_buf,
enum dma_data_direction direction)
{
- dma_addr_t dma_addr;
+ u64 dma_addr;
- dma_addr = dma_map_single(device->ib_device->dma_device,
- regd_buf->virt_addr,
- regd_buf->data_size, direction);
- BUG_ON(dma_mapping_error(dma_addr));
+ dma_addr = ib_dma_map_single(device->ib_device,
+ regd_buf->virt_addr,
+ regd_buf->data_size, direction);
+ BUG_ON(ib_dma_mapping_error(device->ib_device, dma_addr));
regd_buf->reg.lkey = device->mr->lkey;
regd_buf->reg.len = regd_buf->data_size;
enum iser_data_dir cmd_dir)
{
int dma_nents;
- struct device *dma_device;
+ struct ib_device *dev;
char *mem = NULL;
struct iser_data_buf *data = &iser_ctask->data[cmd_dir];
unsigned long cmd_data_len = data->data_len;
if (cmd_data_len > ISER_KMALLOC_THRESHOLD)
mem = (void *)__get_free_pages(GFP_NOIO,
- long_log2(roundup_pow_of_two(cmd_data_len)) - PAGE_SHIFT);
+ ilog2(roundup_pow_of_two(cmd_data_len)) - PAGE_SHIFT);
else
mem = kmalloc(cmd_data_len, GFP_NOIO);
iser_ctask->data_copy[cmd_dir].copy_buf = mem;
- dma_device = iser_ctask->iser_conn->ib_conn->device->ib_device->dma_device;
-
- if (cmd_dir == ISER_DIR_OUT)
- dma_nents = dma_map_sg(dma_device,
- &iser_ctask->data_copy[cmd_dir].sg_single,
- 1, DMA_TO_DEVICE);
- else
- dma_nents = dma_map_sg(dma_device,
- &iser_ctask->data_copy[cmd_dir].sg_single,
- 1, DMA_FROM_DEVICE);
-
+ dev = iser_ctask->iser_conn->ib_conn->device->ib_device;
+ dma_nents = ib_dma_map_sg(dev,
+ &iser_ctask->data_copy[cmd_dir].sg_single,
+ 1,
+ (cmd_dir == ISER_DIR_OUT) ?
+ DMA_TO_DEVICE : DMA_FROM_DEVICE);
BUG_ON(dma_nents == 0);
iser_ctask->data_copy[cmd_dir].dma_nents = dma_nents;
void iser_finalize_rdma_unaligned_sg(struct iscsi_iser_cmd_task *iser_ctask,
enum iser_data_dir cmd_dir)
{
- struct device *dma_device;
+ struct ib_device *dev;
struct iser_data_buf *mem_copy;
unsigned long cmd_data_len;
- dma_device = iser_ctask->iser_conn->ib_conn->device->ib_device->dma_device;
- mem_copy = &iser_ctask->data_copy[cmd_dir];
+ dev = iser_ctask->iser_conn->ib_conn->device->ib_device;
+ mem_copy = &iser_ctask->data_copy[cmd_dir];
- if (cmd_dir == ISER_DIR_OUT)
- dma_unmap_sg(dma_device, &mem_copy->sg_single, 1,
- DMA_TO_DEVICE);
- else
- dma_unmap_sg(dma_device, &mem_copy->sg_single, 1,
- DMA_FROM_DEVICE);
+ ib_dma_unmap_sg(dev, &mem_copy->sg_single, 1,
+ (cmd_dir == ISER_DIR_OUT) ?
+ DMA_TO_DEVICE : DMA_FROM_DEVICE);
if (cmd_dir == ISER_DIR_IN) {
char *mem;
if (cmd_data_len > ISER_KMALLOC_THRESHOLD)
free_pages((unsigned long)mem_copy->copy_buf,
- long_log2(roundup_pow_of_two(cmd_data_len)) - PAGE_SHIFT);
+ ilog2(roundup_pow_of_two(cmd_data_len)) - PAGE_SHIFT);
else
kfree(mem_copy->copy_buf);
* consecutive elements. Also, it handles one entry SG.
*/
static int iser_sg_to_page_vec(struct iser_data_buf *data,
- struct iser_page_vec *page_vec)
+ struct iser_page_vec *page_vec,
+ struct ib_device *ibdev)
{
struct scatterlist *sg = (struct scatterlist *)data->buf;
- dma_addr_t first_addr, last_addr, page;
- int start_aligned, end_aligned;
+ u64 first_addr, last_addr, page;
+ int end_aligned;
unsigned int cur_page = 0;
unsigned long total_sz = 0;
int i;
page_vec->offset = (u64) sg[0].offset & ~MASK_4K;
for (i = 0; i < data->dma_nents; i++) {
- total_sz += sg_dma_len(&sg[i]);
+ unsigned int dma_len = ib_sg_dma_len(ibdev, &sg[i]);
+
+ total_sz += dma_len;
- first_addr = sg_dma_address(&sg[i]);
- last_addr = first_addr + sg_dma_len(&sg[i]);
+ first_addr = ib_sg_dma_address(ibdev, &sg[i]);
+ last_addr = first_addr + dma_len;
- start_aligned = !(first_addr & ~MASK_4K);
end_aligned = !(last_addr & ~MASK_4K);
/* continue to collect page fragments till aligned or SG ends */
while (!end_aligned && (i + 1 < data->dma_nents)) {
i++;
- total_sz += sg_dma_len(&sg[i]);
- last_addr = sg_dma_address(&sg[i]) + sg_dma_len(&sg[i]);
+ dma_len = ib_sg_dma_len(ibdev, &sg[i]);
+ total_sz += dma_len;
+ last_addr = ib_sg_dma_address(ibdev, &sg[i]) + dma_len;
end_aligned = !(last_addr & ~MASK_4K);
}
* the number of entries which are aligned correctly. Supports the case where
* consecutive SG elements are actually fragments of the same physcial page.
*/
-static unsigned int iser_data_buf_aligned_len(struct iser_data_buf *data)
+static unsigned int iser_data_buf_aligned_len(struct iser_data_buf *data,
+ struct ib_device *ibdev)
{
struct scatterlist *sg;
- dma_addr_t end_addr, next_addr;
+ u64 end_addr, next_addr;
int i, cnt;
unsigned int ret_len = 0;
(unsigned long)page_to_phys(sg[i].page),
(unsigned long)sg[i].offset,
(unsigned long)sg[i].length); */
- end_addr = sg_dma_address(&sg[i]) +
- sg_dma_len(&sg[i]);
+ end_addr = ib_sg_dma_address(ibdev, &sg[i]) +
+ ib_sg_dma_len(ibdev, &sg[i]);
/* iser_dbg("Checking sg iobuf end address "
"0x%08lX\n", end_addr); */
if (i + 1 < data->dma_nents) {
- next_addr = sg_dma_address(&sg[i+1]);
+ next_addr = ib_sg_dma_address(ibdev, &sg[i+1]);
/* are i, i+1 fragments of the same page? */
if (end_addr == next_addr)
continue;
return ret_len;
}
-static void iser_data_buf_dump(struct iser_data_buf *data)
+static void iser_data_buf_dump(struct iser_data_buf *data,
+ struct ib_device *ibdev)
{
struct scatterlist *sg = (struct scatterlist *)data->buf;
int i;
for (i = 0; i < data->dma_nents; i++)
iser_err("sg[%d] dma_addr:0x%lX page:0x%p "
"off:0x%x sz:0x%x dma_len:0x%x\n",
- i, (unsigned long)sg_dma_address(&sg[i]),
+ i, (unsigned long)ib_sg_dma_address(ibdev, &sg[i]),
sg[i].page, sg[i].offset,
- sg[i].length,sg_dma_len(&sg[i]));
+ sg[i].length, ib_sg_dma_len(ibdev, &sg[i]));
}
static void iser_dump_page_vec(struct iser_page_vec *page_vec)
}
static void iser_page_vec_build(struct iser_data_buf *data,
- struct iser_page_vec *page_vec)
+ struct iser_page_vec *page_vec,
+ struct ib_device *ibdev)
{
int page_vec_len = 0;
page_vec->offset = 0;
iser_dbg("Translating sg sz: %d\n", data->dma_nents);
- page_vec_len = iser_sg_to_page_vec(data,page_vec);
+ page_vec_len = iser_sg_to_page_vec(data, page_vec, ibdev);
iser_dbg("sg len %d page_vec_len %d\n", data->dma_nents,page_vec_len);
page_vec->length = page_vec_len;
if (page_vec_len * SIZE_4K < page_vec->data_size) {
iser_err("page_vec too short to hold this SG\n");
- iser_data_buf_dump(data);
+ iser_data_buf_dump(data, ibdev);
iser_dump_page_vec(page_vec);
BUG();
}
enum iser_data_dir iser_dir,
enum dma_data_direction dma_dir)
{
- struct device *dma_device;
+ struct ib_device *dev;
iser_ctask->dir[iser_dir] = 1;
- dma_device =
- iser_ctask->iser_conn->ib_conn->device->ib_device->dma_device;
+ dev = iser_ctask->iser_conn->ib_conn->device->ib_device;
- data->dma_nents = dma_map_sg(dma_device, data->buf, data->size, dma_dir);
+ data->dma_nents = ib_dma_map_sg(dev, data->buf, data->size, dma_dir);
if (data->dma_nents == 0) {
iser_err("dma_map_sg failed!!!\n");
return -EINVAL;
void iser_dma_unmap_task_data(struct iscsi_iser_cmd_task *iser_ctask)
{
- struct device *dma_device;
+ struct ib_device *dev;
struct iser_data_buf *data;
- dma_device =
- iser_ctask->iser_conn->ib_conn->device->ib_device->dma_device;
+ dev = iser_ctask->iser_conn->ib_conn->device->ib_device;
if (iser_ctask->dir[ISER_DIR_IN]) {
data = &iser_ctask->data[ISER_DIR_IN];
- dma_unmap_sg(dma_device, data->buf, data->size, DMA_FROM_DEVICE);
+ ib_dma_unmap_sg(dev, data->buf, data->size, DMA_FROM_DEVICE);
}
if (iser_ctask->dir[ISER_DIR_OUT]) {
data = &iser_ctask->data[ISER_DIR_OUT];
- dma_unmap_sg(dma_device, data->buf, data->size, DMA_TO_DEVICE);
+ ib_dma_unmap_sg(dev, data->buf, data->size, DMA_TO_DEVICE);
}
}
{
struct iser_conn *ib_conn = iser_ctask->iser_conn->ib_conn;
struct iser_device *device = ib_conn->device;
+ struct ib_device *ibdev = device->ib_device;
struct iser_data_buf *mem = &iser_ctask->data[cmd_dir];
struct iser_regd_buf *regd_buf;
int aligned_len;
regd_buf = &iser_ctask->rdma_regd[cmd_dir];
- aligned_len = iser_data_buf_aligned_len(mem);
+ aligned_len = iser_data_buf_aligned_len(mem, ibdev);
if (aligned_len != mem->dma_nents) {
iser_err("rdma alignment violation %d/%d aligned\n",
aligned_len, mem->size);
- iser_data_buf_dump(mem);
+ iser_data_buf_dump(mem, ibdev);
/* unmap the command data before accessing it */
iser_dma_unmap_task_data(iser_ctask);
regd_buf->reg.lkey = device->mr->lkey;
regd_buf->reg.rkey = device->mr->rkey;
- regd_buf->reg.len = sg_dma_len(&sg[0]);
- regd_buf->reg.va = sg_dma_address(&sg[0]);
+ regd_buf->reg.len = ib_sg_dma_len(ibdev, &sg[0]);
+ regd_buf->reg.va = ib_sg_dma_address(ibdev, &sg[0]);
regd_buf->reg.is_fmr = 0;
iser_dbg("PHYSICAL Mem.register: lkey: 0x%08X rkey: 0x%08X "
(unsigned long)regd_buf->reg.va,
(unsigned long)regd_buf->reg.len);
} else { /* use FMR for multiple dma entries */
- iser_page_vec_build(mem, ib_conn->page_vec);
+ iser_page_vec_build(mem, ib_conn->page_vec, ibdev);
err = iser_reg_page_vec(ib_conn, ib_conn->page_vec, ®d_buf->reg);
if (err) {
- iser_data_buf_dump(mem);
+ iser_data_buf_dump(mem, ibdev);
iser_err("mem->dma_nents = %d (dlength = 0x%x)\n", mem->dma_nents,
ntoh24(iser_ctask->desc.iscsi_header.dlength));
iser_err("page_vec: data_size = 0x%x, length = %d, offset = 0x%x\n",
if (!iu->buf)
goto out_free_iu;
- iu->dma = dma_map_single(host->dev->dev->dma_device,
- iu->buf, size, direction);
- if (dma_mapping_error(iu->dma))
+ iu->dma = ib_dma_map_single(host->dev->dev, iu->buf, size, direction);
+ if (ib_dma_mapping_error(host->dev->dev, iu->dma))
goto out_free_buf;
iu->size = size;
if (!iu)
return;
- dma_unmap_single(host->dev->dev->dma_device,
- iu->dma, iu->size, iu->direction);
+ ib_dma_unmap_single(host->dev->dev, iu->dma, iu->size, iu->direction);
kfree(iu->buf);
kfree(iu);
}
scat = &req->fake_sg;
}
- dma_unmap_sg(target->srp_host->dev->dev->dma_device, scat, nents,
- scmnd->sc_data_direction);
+ ib_dma_unmap_sg(target->srp_host->dev->dev, scat, nents,
+ scmnd->sc_data_direction);
}
static void srp_remove_req(struct srp_target_port *target, struct srp_request *req)
int i, j;
int ret;
struct srp_device *dev = target->srp_host->dev;
+ struct ib_device *ibdev = dev->dev;
if (!dev->fmr_pool)
return -ENODEV;
- if ((sg_dma_address(&scat[0]) & ~dev->fmr_page_mask) &&
+ if ((ib_sg_dma_address(ibdev, &scat[0]) & ~dev->fmr_page_mask) &&
mellanox_workarounds && !memcmp(&target->ioc_guid, mellanox_oui, 3))
return -EINVAL;
len = page_cnt = 0;
for (i = 0; i < sg_cnt; ++i) {
- if (sg_dma_address(&scat[i]) & ~dev->fmr_page_mask) {
+ unsigned int dma_len = ib_sg_dma_len(ibdev, &scat[i]);
+
+ if (ib_sg_dma_address(ibdev, &scat[i]) & ~dev->fmr_page_mask) {
if (i > 0)
return -EINVAL;
else
++page_cnt;
}
- if ((sg_dma_address(&scat[i]) + sg_dma_len(&scat[i])) &
+ if ((ib_sg_dma_address(ibdev, &scat[i]) + dma_len) &
~dev->fmr_page_mask) {
if (i < sg_cnt - 1)
return -EINVAL;
++page_cnt;
}
- len += sg_dma_len(&scat[i]);
+ len += dma_len;
}
page_cnt += len >> dev->fmr_page_shift;
return -ENOMEM;
page_cnt = 0;
- for (i = 0; i < sg_cnt; ++i)
- for (j = 0; j < sg_dma_len(&scat[i]); j += dev->fmr_page_size)
+ for (i = 0; i < sg_cnt; ++i) {
+ unsigned int dma_len = ib_sg_dma_len(ibdev, &scat[i]);
+
+ for (j = 0; j < dma_len; j += dev->fmr_page_size)
dma_pages[page_cnt++] =
- (sg_dma_address(&scat[i]) & dev->fmr_page_mask) + j;
+ (ib_sg_dma_address(ibdev, &scat[i]) &
+ dev->fmr_page_mask) + j;
+ }
req->fmr = ib_fmr_pool_map_phys(dev->fmr_pool,
dma_pages, page_cnt, io_addr);
goto out;
}
- buf->va = cpu_to_be64(sg_dma_address(&scat[0]) & ~dev->fmr_page_mask);
+ buf->va = cpu_to_be64(ib_sg_dma_address(ibdev, &scat[0]) &
+ ~dev->fmr_page_mask);
buf->key = cpu_to_be32(req->fmr->fmr->rkey);
buf->len = cpu_to_be32(len);
struct srp_cmd *cmd = req->cmd->buf;
int len, nents, count;
u8 fmt = SRP_DATA_DESC_DIRECT;
+ struct srp_device *dev;
+ struct ib_device *ibdev;
if (!scmnd->request_buffer || scmnd->sc_data_direction == DMA_NONE)
return sizeof (struct srp_cmd);
sg_init_one(scat, scmnd->request_buffer, scmnd->request_bufflen);
}
- count = dma_map_sg(target->srp_host->dev->dev->dma_device,
- scat, nents, scmnd->sc_data_direction);
+ dev = target->srp_host->dev;
+ ibdev = dev->dev;
+
+ count = ib_dma_map_sg(ibdev, scat, nents, scmnd->sc_data_direction);
fmt = SRP_DATA_DESC_DIRECT;
len = sizeof (struct srp_cmd) + sizeof (struct srp_direct_buf);
*/
struct srp_direct_buf *buf = (void *) cmd->add_data;
- buf->va = cpu_to_be64(sg_dma_address(scat));
- buf->key = cpu_to_be32(target->srp_host->dev->mr->rkey);
- buf->len = cpu_to_be32(sg_dma_len(scat));
+ buf->va = cpu_to_be64(ib_sg_dma_address(ibdev, scat));
+ buf->key = cpu_to_be32(dev->mr->rkey);
+ buf->len = cpu_to_be32(ib_sg_dma_len(ibdev, scat));
} else if (srp_map_fmr(target, scat, count, req,
(void *) cmd->add_data)) {
/*
count * sizeof (struct srp_direct_buf);
for (i = 0; i < count; ++i) {
+ unsigned int dma_len = ib_sg_dma_len(ibdev, &scat[i]);
+
buf->desc_list[i].va =
- cpu_to_be64(sg_dma_address(&scat[i]));
+ cpu_to_be64(ib_sg_dma_address(ibdev, &scat[i]));
buf->desc_list[i].key =
- cpu_to_be32(target->srp_host->dev->mr->rkey);
- buf->desc_list[i].len =
- cpu_to_be32(sg_dma_len(&scat[i]));
- datalen += sg_dma_len(&scat[i]);
+ cpu_to_be32(dev->mr->rkey);
+ buf->desc_list[i].len = cpu_to_be32(dma_len);
+ datalen += dma_len;
}
if (scmnd->sc_data_direction == DMA_TO_DEVICE)
static void srp_handle_recv(struct srp_target_port *target, struct ib_wc *wc)
{
+ struct ib_device *dev;
struct srp_iu *iu;
u8 opcode;
iu = target->rx_ring[wc->wr_id & ~SRP_OP_RECV];
- dma_sync_single_for_cpu(target->srp_host->dev->dev->dma_device, iu->dma,
- target->max_ti_iu_len, DMA_FROM_DEVICE);
+ dev = target->srp_host->dev->dev;
+ ib_dma_sync_single_for_cpu(dev, iu->dma, target->max_ti_iu_len,
+ DMA_FROM_DEVICE);
opcode = *(u8 *) iu->buf;
break;
}
- dma_sync_single_for_device(target->srp_host->dev->dev->dma_device, iu->dma,
- target->max_ti_iu_len, DMA_FROM_DEVICE);
+ ib_dma_sync_single_for_device(dev, iu->dma, target->max_ti_iu_len,
+ DMA_FROM_DEVICE);
}
static void srp_completion(struct ib_cq *cq, void *target_ptr)
struct srp_request *req;
struct srp_iu *iu;
struct srp_cmd *cmd;
+ struct ib_device *dev;
int len;
if (target->state == SRP_TARGET_CONNECTING)
if (!iu)
goto err;
- dma_sync_single_for_cpu(target->srp_host->dev->dev->dma_device, iu->dma,
- srp_max_iu_len, DMA_TO_DEVICE);
+ dev = target->srp_host->dev->dev;
+ ib_dma_sync_single_for_cpu(dev, iu->dma, srp_max_iu_len,
+ DMA_TO_DEVICE);
req = list_entry(target->free_reqs.next, struct srp_request, list);
goto err_unmap;
}
- dma_sync_single_for_device(target->srp_host->dev->dev->dma_device, iu->dma,
- srp_max_iu_len, DMA_TO_DEVICE);
+ ib_dma_sync_single_for_device(dev, iu->dma, srp_max_iu_len,
+ DMA_TO_DEVICE);
if (__srp_post_send(target, iu, len)) {
printk(KERN_ERR PFX "Send failed\n");
};
struct srp_iu {
- dma_addr_t dma;
+ u64 dma;
void *buf;
size_t size;
enum dma_data_direction direction;
obj-$(CONFIG_INPUT_JOYSTICK) += joystick/
obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/
obj-$(CONFIG_INPUT_MISC) += misc/
+
}
/**
- * input_ff_erase - erase an effect from device
+ * input_ff_erase - erase a force-feedback effect from device
* @dev: input device to erase effect from
* @effect_id: id of the ffect to be erased
* @file: purported owner of the request
/**
* input_ff_free() - frees force feedback portion of input device
- * @dev: input device supporintg force feedback
+ * @dev: input device supporting force feedback
*
* This function is only needed in error path as input core will
* automatically free force feedback structures when device is
}
/**
- * input_ff_create_memless() - create memoryless FF device
+ * input_ff_create_memless() - create memoryless force-feedback device
* @dev: input device supporting force-feedback
* @data: driver-specific data to be passed into @play_effect
* @play_effect: driver-specific method for playing FF effect
return 0;
}
-static struct bus_type gameport_bus = {
- .name = "gameport",
- .probe = gameport_driver_probe,
- .remove = gameport_driver_remove,
-};
-
static void gameport_add_driver(struct gameport_driver *drv)
{
int error;
return !gameport_drv->ignore;
}
+static struct bus_type gameport_bus = {
+ .name = "gameport",
+ .dev_attrs = gameport_device_attrs,
+ .drv_attrs = gameport_driver_attrs,
+ .match = gameport_bus_match,
+ .probe = gameport_driver_probe,
+ .remove = gameport_driver_remove,
+};
+
static void gameport_set_drv(struct gameport *gameport, struct gameport_driver *drv)
{
mutex_lock(&gameport->drv_mutex);
int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mode)
{
-
if (gameport->open) {
if (gameport->open(gameport, mode)) {
return -1;
{
int error;
- gameport_bus.dev_attrs = gameport_device_attrs;
- gameport_bus.drv_attrs = gameport_driver_attrs;
- gameport_bus.match = gameport_bus_match;
error = bus_register(&gameport_bus);
if (error) {
printk(KERN_ERR "gameport: failed to register gameport bus, error: %d\n", error);
int i, cards = 0;
if (!request_region(L4_PORT, 1, "lightning"))
- return -1;
+ return -EBUSY;
for (i = 0; i < 2; i++)
if (l4_add_card(i) == 0)
if (!cards) {
release_region(L4_PORT, 1);
- return -1;
+ return -ENODEV;
}
return 0;
/**
* input_event() - report new input event
- * @handle: device that generated the event
+ * @dev: device that generated the event
* @type: type of the event
* @code: event code
* @value: value of the event
};
EXPORT_SYMBOL_GPL(input_class);
+/**
+ * input_allocate_device - allocate memory for new input device
+ *
+ * Returns prepared struct input_dev or NULL.
+ *
+ * NOTE: Use input_free_device() to free devices that have not been
+ * registered; input_unregister_device() should be used for already
+ * registered devices.
+ */
struct input_dev *input_allocate_device(void)
{
struct input_dev *dev;
}
EXPORT_SYMBOL(input_allocate_device);
+/**
+ * input_free_device - free memory occupied by input_dev structure
+ * @dev: input device to free
+ *
+ * This function should only be used if input_register_device()
+ * was not called yet or if it failed. Once device was registered
+ * use input_unregister_device() and memory will be freed once last
+ * refrence to the device is dropped.
+ *
+ * Device should be allocated by input_allocate_device().
+ *
+ * NOTE: If there are references to the input device then memory
+ * will not be freed until last reference is dropped.
+ */
void input_free_device(struct input_dev *dev)
{
if (dev) {
for (i = 0; i < 2; i++)
if (port->adi[i].length > 0) {
adi_init_center(port->adi + i);
- input_register_device(port->adi[i].dev);
+ err = input_register_device(port->adi[i].dev);
+ if (err)
+ goto fail3;
}
return 0;
+ fail3: while (--i >= 0) {
+ if (port->adi[i].length > 0) {
+ input_unregister_device(port->adi[i].dev);
+ port->adi[i].dev = NULL;
+ }
+ }
fail2: for (i = 0; i < 2; i++)
if (port->adi[i].dev)
input_free_device(port->adi[i].dev);
amijoy_dev[i]->absmax[ABS_X + j] = 1;
}
- input_register_device(amijoy_dev[i]);
+ err = input_register_device(amijoy_dev[i]);
+ if (err) {
+ input_free_device(amijoy_dev[i]);
+ goto fail;
+ }
}
return 0;
{
struct input_dev *input_dev;
int i, j, t, v, w, x, y, z;
+ int error;
analog_name(analog);
snprintf(analog->phys, sizeof(analog->phys),
analog_decode(analog, port->axes, port->initial, port->buttons);
- input_register_device(analog->dev);
+ error = input_register_device(analog->dev);
+ if (error) {
+ input_free_device(analog->dev);
+ return error;
+ }
return 0;
}
return 0;
fail3: while (--i >= 0)
- input_unregister_device(port->analog[i].dev);
+ if (port->analog[i].mask)
+ input_unregister_device(port->analog[i].dev);
fail2: gameport_close(gameport);
fail1: gameport_set_drvdata(gameport, NULL);
kfree(port);
for (j = 0; cobra_btn[j]; j++)
set_bit(cobra_btn[j], input_dev->keybit);
- input_register_device(cobra->dev[i]);
+ err = input_register_device(cobra->dev[i]);
+ if (err)
+ goto fail4;
}
return 0;
- fail3: for (i = 0; i < 2; i++)
+ fail4: input_free_device(cobra->dev[i]);
+ fail3: while (--i >= 0)
if (cobra->dev[i])
input_unregister_device(cobra->dev[i]);
fail2: gameport_close(gameport);
input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
}
- input_register_device(gf2k->dev);
+ err = input_register_device(gf2k->dev);
+ if (err)
+ goto fail2;
return 0;
if (!port->registered) {
dbg("New Grip pad in multiport slot %d.\n", slot);
- register_slot(slot, grip);
+ if (register_slot(slot, grip)) {
+ port->mode = GRIP_MODE_RESET;
+ port->dirty = 0;
+ }
}
return flags;
}
struct grip_port *port = grip->port[slot];
struct input_dev *input_dev;
int j, t;
+ int err;
port->dev = input_dev = input_allocate_device();
if (!input_dev)
if (t > 0)
set_bit(t, input_dev->keybit);
- input_register_device(port->dev);
+ err = input_register_device(port->dev);
+ if (err) {
+ input_free_device(port->dev);
+ return err;
+ }
+
port->registered = 1;
if (port->dirty) /* report initial state, if any */
for (i = 0; (t = guillemot->type->btn[i]) >= 0; i++)
set_bit(t, input_dev->keybit);
- input_register_device(guillemot->dev);
+ err = input_register_device(guillemot->dev);
+ if (err)
+ goto fail2;
return 0;
if (i == 20) { /* 5 seconds */
printk(KERN_ERR "iforce-main.c: Timeout waiting for response from device.\n");
- input_free_device(input_dev);
- return -ENODEV;
+ error = -ENODEV;
+ goto fail;
}
/*
set_bit(iforce->type->ff[i], input_dev->ffbit);
error = input_ff_create(input_dev, ff_effects);
- if (error) {
- input_free_device(input_dev);
- return error;
- }
+ if (error)
+ goto fail;
ff = input_dev->ff;
ff->upload = iforce_upload_effect;
* Register input device.
*/
- input_register_device(iforce->dev);
+ error = input_register_device(iforce->dev);
+ if (error)
+ goto fail;
printk(KERN_DEBUG "iforce->dev->open = %p\n", iforce->dev->open);
return 0;
+
+ fail: input_free_device(input_dev);
+ return error;
}
static int __init iforce_init(void)
{
+ int err = 0;
+
#ifdef CONFIG_JOYSTICK_IFORCE_USB
- usb_register(&iforce_usb_driver);
+ err = usb_register(&iforce_usb_driver);
+ if (err)
+ return err;
#endif
#ifdef CONFIG_JOYSTICK_IFORCE_232
- serio_register_driver(&iforce_serio_drv);
+ err = serio_register_driver(&iforce_serio_drv);
+#ifdef CONFIG_JOYSTICK_IFORCE_USB
+ if (err)
+ usb_deregister(&iforce_usb_driver);
#endif
- return 0;
+#endif
+ return err;
}
static void __exit iforce_exit(void)
serio_set_drvdata(serio, iforce);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(iforce);
- return err;
- }
+ if (err)
+ goto fail1;
err = iforce_init_device(iforce);
- if (err) {
- serio_close(serio);
- serio_set_drvdata(serio, NULL);
- kfree(iforce);
- return -ENODEV;
- }
+ if (err)
+ goto fail2;
return 0;
+
+ fail2: serio_close(serio);
+ fail1: serio_set_drvdata(serio, NULL);
+ kfree(iforce);
+ return err;
}
static void iforce_serio_disconnect(struct serio *serio)
for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++)
set_bit(t, input_dev->keybit);
- input_register_device(interact->dev);
+ err = input_register_device(interact->dev);
+ if (err)
+ goto fail2;
return 0;
magellan = kzalloc(sizeof(struct magellan), GFP_KERNEL);
input_dev = input_allocate_device();
if (!magellan || !input_dev)
- goto fail;
+ goto fail1;
magellan->dev = input_dev;
snprintf(magellan->phys, sizeof(magellan->phys), "%s/input0", serio->phys);
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device(magellan->dev);
+ if (err)
+ goto fail3;
- input_register_device(magellan->dev);
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(magellan);
return err;
}
static int __init magellan_init(void)
{
- serio_register_driver(&magellan_drv);
- return 0;
+ return serio_register_driver(&magellan_drv);
}
static void __exit magellan_exit(void)
spaceball = kmalloc(sizeof(struct spaceball), GFP_KERNEL);
input_dev = input_allocate_device();
if (!spaceball || !input_dev)
- goto fail;
+ goto fail1;
spaceball->dev = input_dev;
snprintf(spaceball->phys, sizeof(spaceball->phys), "%s/input0", serio->phys);
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device(spaceball->dev);
+ if (err)
+ goto fail3;
- input_register_device(spaceball->dev);
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(spaceball);
return err;
}
static int __init spaceball_init(void)
{
- serio_register_driver(&spaceball_drv);
- return 0;
+ return serio_register_driver(&spaceball_drv);
}
static void __exit spaceball_exit(void)
spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL);
input_dev = input_allocate_device();
if (!spaceorb || !input_dev)
- goto fail;
+ goto fail1;
spaceorb->dev = input_dev;
snprintf(spaceorb->phys, sizeof(spaceorb->phys), "%s/input0", serio->phys);
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device(spaceorb->dev);
+ if (err)
+ goto fail3;
- input_register_device(spaceorb->dev);
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(spaceorb);
return err;
}
static int __init spaceorb_init(void)
{
- serio_register_driver(&spaceorb_drv);
- return 0;
+ return serio_register_driver(&spaceorb_drv);
}
static void __exit spaceorb_exit(void)
stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL);
input_dev = input_allocate_device();
if (!stinger || !input_dev)
- goto fail;
+ goto fail1;
stinger->dev = input_dev;
snprintf(stinger->phys, sizeof(stinger->phys), "%s/serio0", serio->phys);
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device(stinger->dev);
+ if (err)
+ goto fail3;
- input_register_device(stinger->dev);
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(stinger);
return err;
}
static int __init stinger_init(void)
{
- serio_register_driver(&stinger_drv);
- return 0;
+ return serio_register_driver(&stinger_drv);
}
static void __exit stinger_exit(void)
twidjoy = kzalloc(sizeof(struct twidjoy), GFP_KERNEL);
input_dev = input_allocate_device();
if (!twidjoy || !input_dev)
- goto fail;
+ goto fail1;
twidjoy->dev = input_dev;
snprintf(twidjoy->phys, sizeof(twidjoy->phys), "%s/input0", serio->phys);
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device(twidjoy->dev);
+ if (err)
+ goto fail3;
- input_register_device(twidjoy->dev);
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(twidjoy);
return err;
}
static int __init twidjoy_init(void)
{
- serio_register_driver(&twidjoy_drv);
- return 0;
+ return serio_register_driver(&twidjoy_drv);
}
static void __exit twidjoy_exit(void)
warrior = kzalloc(sizeof(struct warrior), GFP_KERNEL);
input_dev = input_allocate_device();
if (!warrior || !input_dev)
- goto fail;
+ goto fail1;
warrior->dev = input_dev;
snprintf(warrior->phys, sizeof(warrior->phys), "%s/input0", serio->phys);
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device(warrior->dev);
+ if (err)
+ goto fail3;
- input_register_device(warrior->dev);
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(warrior);
return err;
}
static int __init warrior_init(void)
{
- serio_register_driver(&warrior_drv);
- return 0;
+ return serio_register_driver(&warrior_drv);
}
static void __exit warrior_exit(void)
To compile this driver as a module, choose M here: the
module will be called omap-keypad.
+config KEYBOARD_AAED2000
+ tristate "AAED-2000 keyboard"
+ depends on MACH_AAED2000
+ default y
+ help
+ Say Y here to enable the keyboard on the Agilent AAED-2000
+ development board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aaed2000_kbd.
+
endif
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
+obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
--- /dev/null
+/*
+ * Keyboard driver for the AAED-2000 dev board
+ *
+ * Copyright (c) 2006 Nicolas Bellido Y Ortega
+ *
+ * Based on corgikbd.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/aaed2000.h>
+
+#define KB_ROWS 12
+#define KB_COLS 8
+#define KB_ROWMASK(r) (1 << (r))
+#define SCANCODE(r,c) (((c) * KB_ROWS) + (r))
+#define NR_SCANCODES (KB_COLS * KB_ROWS)
+
+#define SCAN_INTERVAL (50) /* ms */
+#define KB_ACTIVATE_DELAY (20) /* us */
+
+static unsigned char aaedkbd_keycode[NR_SCANCODES] = {
+ KEY_9, KEY_0, KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, 0, KEY_SPACE, KEY_KP6, 0, KEY_KPDOT, 0, 0,
+ KEY_K, KEY_M, KEY_O, KEY_DOT, KEY_SLASH, 0, KEY_F, 0, 0, 0, KEY_LEFTSHIFT, 0,
+ KEY_I, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, 0, 0, 0, 0, 0, KEY_RIGHTSHIFT, 0,
+ KEY_8, KEY_L, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_ENTER, 0, 0, 0, 0, 0, 0, 0,
+ KEY_J, KEY_H, KEY_B, KEY_KP8, KEY_KP4, 0, KEY_C, KEY_D, KEY_S, KEY_A, 0, KEY_CAPSLOCK,
+ KEY_Y, KEY_U, KEY_N, KEY_T, 0, 0, KEY_R, KEY_E, KEY_W, KEY_Q, 0, KEY_TAB,
+ KEY_7, KEY_6, KEY_G, 0, KEY_5, 0, KEY_4, KEY_3, KEY_2, KEY_1, 0, KEY_GRAVE,
+ 0, 0, KEY_COMMA, 0, KEY_KP2, 0, KEY_V, KEY_LEFTALT, KEY_X, KEY_Z, 0, KEY_LEFTCTRL
+};
+
+struct aaedkbd {
+ unsigned char keycode[ARRAY_SIZE(aaedkbd_keycode)];
+ struct input_dev *input;
+ struct work_struct workq;
+ int kbdscan_state[KB_COLS];
+ int kbdscan_count[KB_COLS];
+};
+
+#define KBDSCAN_STABLE_COUNT 2
+
+static void aaedkbd_report_col(struct aaedkbd *aaedkbd,
+ unsigned int col, unsigned int rowd)
+{
+ unsigned int scancode, pressed;
+ unsigned int row;
+
+ for (row = 0; row < KB_ROWS; row++) {
+ scancode = SCANCODE(row, col);
+ pressed = rowd & KB_ROWMASK(row);
+
+ input_report_key(aaedkbd->input, aaedkbd->keycode[scancode], pressed);
+ }
+}
+
+/* Scan the hardware keyboard and push any changes up through the input layer */
+static void aaedkbd_work(void *data)
+{
+ struct aaedkbd *aaedkbd = data;
+ unsigned int col, rowd;
+
+ col = 0;
+ do {
+ AAEC_GPIO_KSCAN = col + 8;
+ udelay(KB_ACTIVATE_DELAY);
+ rowd = AAED_EXT_GPIO & AAED_EGPIO_KBD_SCAN;
+
+ if (rowd != aaedkbd->kbdscan_state[col]) {
+ aaedkbd->kbdscan_count[col] = 0;
+ aaedkbd->kbdscan_state[col] = rowd;
+ } else if (++aaedkbd->kbdscan_count[col] >= KBDSCAN_STABLE_COUNT) {
+ aaedkbd_report_col(aaedkbd, col, rowd);
+ col++;
+ }
+ } while (col < KB_COLS);
+
+ AAEC_GPIO_KSCAN = 0x07;
+ input_sync(aaedkbd->input);
+
+ schedule_delayed_work(&aaedkbd->workq, msecs_to_jiffies(SCAN_INTERVAL));
+}
+
+static int aaedkbd_open(struct input_dev *indev)
+{
+ struct aaedkbd *aaedkbd = indev->private;
+
+ schedule_delayed_work(&aaedkbd->workq, msecs_to_jiffies(SCAN_INTERVAL));
+
+ return 0;
+}
+
+static void aaedkbd_close(struct input_dev *indev)
+{
+ struct aaedkbd *aaedkbd = indev->private;
+
+ cancel_delayed_work(&aaedkbd->workq);
+ flush_scheduled_work();
+}
+
+static int __devinit aaedkbd_probe(struct platform_device *pdev)
+{
+ struct aaedkbd *aaedkbd;
+ struct input_dev *input_dev;
+ int i;
+ int error;
+
+ aaedkbd = kzalloc(sizeof(struct aaedkbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!aaedkbd || !input_dev) {
+ error = -ENOMEM;
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, aaedkbd);
+
+ aaedkbd->input = input_dev;
+
+ /* Init keyboard rescan workqueue */
+ INIT_WORK(&aaedkbd->workq, aaedkbd_work, aaedkbd);
+
+ memcpy(aaedkbd->keycode, aaedkbd_keycode, sizeof(aaedkbd->keycode));
+
+ input_dev->name = "AAED-2000 Keyboard";
+ input_dev->phys = "aaedkbd/input0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &pdev->dev;
+ input_dev->private = aaedkbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ input_dev->keycode = aaedkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(aaedkbd_keycode);
+
+ for (i = 0; i < ARRAY_SIZE(aaedkbd_keycode); i++)
+ set_bit(aaedkbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
+
+ input_dev->open = aaedkbd_open;
+ input_dev->close = aaedkbd_close;
+
+ error = input_register_device(aaedkbd->input);
+ if (error)
+ goto fail;
+
+ return 0;
+
+ fail: kfree(aaedkbd);
+ input_free_device(input_dev);
+ return error;
+}
+
+static int __devexit aaedkbd_remove(struct platform_device *pdev)
+{
+ struct aaedkbd *aaedkbd = platform_get_drvdata(pdev);
+
+ input_unregister_device(aaedkbd->input);
+ kfree(aaedkbd);
+
+ return 0;
+}
+
+static struct platform_driver aaedkbd_driver = {
+ .probe = aaedkbd_probe,
+ .remove = __devexit_p(aaedkbd_remove),
+ .driver = {
+ .name = "aaed2000-keyboard",
+ },
+};
+
+static int __init aaedkbd_init(void)
+{
+ return platform_driver_register(&aaedkbd_driver);
+}
+
+static void __exit aaedkbd_exit(void)
+{
+ platform_driver_unregister(&aaedkbd_driver);
+}
+
+module_init(aaedkbd_init);
+module_exit(aaedkbd_exit);
+
+MODULE_AUTHOR("Nicolas Bellido Y Ortega");
+MODULE_DESCRIPTION("AAED-2000 Keyboard Driver");
+MODULE_LICENSE("GPLv2");
int i, j;
if (!AMIGAHW_PRESENT(AMI_KEYBOARD))
- return -EIO;
+ return -ENODEV;
if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))
return -EBUSY;
amikbd_dev = input_allocate_device();
if (!amikbd_dev) {
printk(KERN_ERR "amikbd: not enough memory for input device\n");
- release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto fail1;
}
amikbd_dev->name = "Amiga Keyboard";
memcpy(key_maps[i], temp_map, sizeof(temp_map));
}
ciaa.cra &= ~0x41; /* serial data in, turn off TA */
- request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd", amikbd_interrupt);
+ if (request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
+ amikbd_interrupt)) {
+ err = -EBUSY;
+ goto fail2;
+ }
+
+ err = input_register_device(amikbd_dev);
+ if (err)
+ goto fail3;
- input_register_device(amikbd_dev);
return 0;
+
+ fail3: free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
+ fail2: input_free_device(amikbd_dev);
+ fail1: release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
+ return err;
}
static void __exit amikbd_exit(void)
atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL);
dev = input_allocate_device();
if (!atkbd || !dev)
- goto fail;
+ goto fail1;
atkbd->dev = dev;
ps2_init(&atkbd->ps2dev, serio);
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
if (atkbd->write) {
if (atkbd_probe(atkbd)) {
- serio_close(serio);
err = -ENODEV;
- goto fail;
+ goto fail3;
}
atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- sysfs_create_group(&serio->dev.kobj, &atkbd_attribute_group);
+ err = sysfs_create_group(&serio->dev.kobj, &atkbd_attribute_group);
+ if (err)
+ goto fail3;
atkbd_enable(atkbd);
- input_register_device(atkbd->dev);
+ err = input_register_device(atkbd->dev);
+ if (err)
+ goto fail4;
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(dev);
+ fail4: sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(dev);
kfree(atkbd);
return err;
}
static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
{
- struct input_dev *new_dev;
+ struct input_dev *old_dev, *new_dev;
unsigned long value;
char *rest;
+ int err;
+ unsigned char old_extra, old_set;
if (!atkbd->write)
return -EIO;
if (atkbd->extra != value) {
/*
* Since device's properties will change we need to
- * unregister old device. But allocate new one first
- * to make sure we have it.
+ * unregister old device. But allocate and register
+ * new one first to make sure we have it.
*/
- if (!(new_dev = input_allocate_device()))
+ old_dev = atkbd->dev;
+ old_extra = atkbd->extra;
+ old_set = atkbd->set;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
return -ENOMEM;
- input_unregister_device(atkbd->dev);
+
atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
atkbd_activate(atkbd);
+ atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(atkbd->dev);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->dev = old_dev;
+ atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
+
}
return count;
}
static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
{
- struct input_dev *new_dev;
+ struct input_dev *old_dev, *new_dev;
unsigned long value;
char *rest;
+ int err;
+ unsigned char old_scroll;
value = simple_strtoul(buf, &rest, 10);
if (*rest || value > 1)
return -EINVAL;
if (atkbd->scroll != value) {
- if (!(new_dev = input_allocate_device()))
+ old_dev = atkbd->dev;
+ old_scroll = atkbd->scroll;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
return -ENOMEM;
- input_unregister_device(atkbd->dev);
+
atkbd->dev = new_dev;
atkbd->scroll = value;
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(atkbd->dev);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->scroll = old_scroll;
+ atkbd->dev = old_dev;
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
}
return count;
}
static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
{
- struct input_dev *new_dev;
+ struct input_dev *old_dev, *new_dev;
unsigned long value;
char *rest;
+ int err;
+ unsigned char old_set, old_extra;
if (!atkbd->write)
return -EIO;
return -EINVAL;
if (atkbd->set != value) {
- if (!(new_dev = input_allocate_device()))
+ old_dev = atkbd->dev;
+ old_extra = atkbd->extra;
+ old_set = atkbd->set;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
return -ENOMEM;
- input_unregister_device(atkbd->dev);
+
atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
atkbd_activate(atkbd);
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(atkbd->dev);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->dev = old_dev;
+ atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
}
return count;
}
static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
{
- struct input_dev *new_dev;
+ struct input_dev *old_dev, *new_dev;
unsigned long value;
char *rest;
+ int err;
+ unsigned char old_softrepeat, old_softraw;
if (!atkbd->write)
return -EIO;
return -EINVAL;
if (atkbd->softrepeat != value) {
- if (!(new_dev = input_allocate_device()))
+ old_dev = atkbd->dev;
+ old_softrepeat = atkbd->softrepeat;
+ old_softraw = atkbd->softraw;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
return -ENOMEM;
- input_unregister_device(atkbd->dev);
+
atkbd->dev = new_dev;
atkbd->softrepeat = value;
if (atkbd->softrepeat)
atkbd->softraw = 1;
atkbd_set_device_attrs(atkbd);
- input_register_device(atkbd->dev);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->dev = old_dev;
+ atkbd->softrepeat = old_softrepeat;
+ atkbd->softraw = old_softraw;
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
}
return count;
}
static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
{
- struct input_dev *new_dev;
+ struct input_dev *old_dev, *new_dev;
unsigned long value;
char *rest;
+ int err;
+ unsigned char old_softraw;
value = simple_strtoul(buf, &rest, 10);
if (*rest || value > 1)
return -EINVAL;
if (atkbd->softraw != value) {
- if (!(new_dev = input_allocate_device()))
+ old_dev = atkbd->dev;
+ old_softraw = atkbd->softraw;
+
+ new_dev = input_allocate_device();
+ if (!new_dev)
return -ENOMEM;
- input_unregister_device(atkbd->dev);
+
atkbd->dev = new_dev;
atkbd->softraw = value;
atkbd_set_device_attrs(atkbd);
- input_register_device(atkbd->dev);
+
+ err = input_register_device(atkbd->dev);
+ if (err) {
+ input_free_device(new_dev);
+
+ atkbd->dev = old_dev;
+ atkbd->softraw = old_softraw;
+ atkbd_set_device_attrs(atkbd);
+
+ return err;
+ }
+ input_unregister_device(old_dev);
}
return count;
}
static int __init atkbd_init(void)
{
- serio_register_driver(&atkbd_drv);
- return 0;
+ return serio_register_driver(&atkbd_drv);
}
static void __exit atkbd_exit(void)
{
struct corgikbd *corgikbd;
struct input_dev *input_dev;
- int i;
+ int i, err = -ENOMEM;
corgikbd = kzalloc(sizeof(struct corgikbd), GFP_KERNEL);
input_dev = input_allocate_device();
- if (!corgikbd || !input_dev) {
- kfree(corgikbd);
- input_free_device(input_dev);
- return -ENOMEM;
- }
+ if (!corgikbd || !input_dev)
+ goto fail;
platform_set_drvdata(pdev, corgikbd);
set_bit(SW_TABLET_MODE, input_dev->swbit);
set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
- input_register_device(corgikbd->input);
+ err = input_register_device(corgikbd->input);
+ if (err)
+ goto fail;
mod_timer(&corgikbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN);
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(corgikbd);
+ return err;
}
static int corgikbd_remove(struct platform_device *pdev)
static int __init hil_kbd_init(void)
{
- serio_register_driver(&hil_kbd_serio_drv);
- return 0;
+ return serio_register_driver(&hil_kbd_serio_drv);
}
static void __exit hil_kbd_exit(void)
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/hil.h>
+#include <linux/io.h>
#include <linux/spinlock.h>
+#include <asm/irq.h>
+#ifdef CONFIG_HP300
+#include <asm/hwtest.h>
+#endif
MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller");
input_dev = input_allocate_device ();
if (!lk || !input_dev) {
err = -ENOMEM;
- goto fail;
+ goto fail1;
}
lk->serio = serio;
err = serio_open (serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device (lk->dev);
+ if (err)
+ goto fail3;
- input_register_device (lk->dev);
lk->serio->write (lk->serio, LK_CMD_POWERCYCLE_RESET);
return 0;
- fail: serio_set_drvdata (serio, NULL);
- input_free_device (input_dev);
+ fail3: serio_close (serio);
+ fail2: serio_set_drvdata (serio, NULL);
+ fail1: input_free_device (input_dev);
kfree (lk);
return err;
}
static int __init
lkkbd_init (void)
{
- serio_register_driver(&lkkbd_drv);
- return 0;
+ return serio_register_driver(&lkkbd_drv);
}
static void __exit
{
struct locomokbd *locomokbd;
struct input_dev *input_dev;
- int i, ret;
+ int i, err;
locomokbd = kzalloc(sizeof(struct locomokbd), GFP_KERNEL);
input_dev = input_allocate_device();
if (!locomokbd || !input_dev) {
- ret = -ENOMEM;
- goto free;
+ err = -ENOMEM;
+ goto err_free_mem;
}
/* try and claim memory region */
if (!request_mem_region((unsigned long) dev->mapbase,
dev->length,
LOCOMO_DRIVER_NAME(dev))) {
- ret = -EBUSY;
+ err = -EBUSY;
printk(KERN_ERR "locomokbd: Can't acquire access to io memory for keyboard\n");
- goto free;
+ goto err_free_mem;
}
locomokbd->ldev = dev;
clear_bit(0, input_dev->keybit);
/* attempt to get the interrupt */
- ret = request_irq(dev->irq[0], locomokbd_interrupt, 0, "locomokbd", locomokbd);
- if (ret) {
+ err = request_irq(dev->irq[0], locomokbd_interrupt, 0, "locomokbd", locomokbd);
+ if (err) {
printk(KERN_ERR "locomokbd: Can't get irq for keyboard\n");
- goto out;
+ goto err_release_region;
}
- input_register_device(locomokbd->input);
+ err = input_register_device(locomokbd->input);
+ if (err)
+ goto err_free_irq;
return 0;
-out:
+ err_free_irq:
+ free_irq(dev->irq[0], locomokbd);
+ err_release_region:
release_mem_region((unsigned long) dev->mapbase, dev->length);
locomo_set_drvdata(dev, NULL);
-free:
+ err_free_mem:
input_free_device(input_dev);
kfree(locomokbd);
- return ret;
+ return err;
}
static int locomokbd_remove(struct locomo_dev *dev)
+++ /dev/null
-/*
- * $Id: maple_keyb.c,v 1.4 2004/03/22 01:18:15 lethal Exp $
- * SEGA Dreamcast keyboard driver
- * Based on drivers/usb/usbkbd.c
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/maple.h>
-
-MODULE_AUTHOR("YAEGASHI Takeshi <t@keshi.org>");
-MODULE_DESCRIPTION("SEGA Dreamcast keyboard driver");
-MODULE_LICENSE("GPL");
-
-static unsigned char dc_kbd_keycode[256] = {
- 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38,
- 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44, 2, 3,
- 4, 5, 6, 7, 8, 9, 10, 11, 28, 1, 14, 15, 57, 12, 13, 26,
- 27, 43, 43, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64,
- 65, 66, 67, 68, 87, 88, 99, 70,119,110,102,104,111,107,109,106,
- 105,108,103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71,
- 72, 73, 82, 83, 86,127,116,117,183,184,185,186,187,188,189,190,
- 191,192,193,194,134,138,130,132,128,129,131,137,133,135,136,113,
- 115,114, 0, 0, 0,121, 0, 89, 93,124, 92, 94, 95, 0, 0, 0,
- 122,123, 90, 91, 85, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 29, 42, 56,125, 97, 54,100,126,164,166,165,163,161,115,114,113,
- 150,158,159,128,136,177,178,176,142,152,173,140
-};
-
-
-struct dc_kbd {
- struct input_dev *dev;
- unsigned char new[8];
- unsigned char old[8];
-};
-
-
-static void dc_scan_kbd(struct dc_kbd *kbd)
-{
- int i;
- struct input_dev *dev = kbd->dev;
-
- for (i = 0; i < 8; i++)
- input_report_key(dev, dc_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
-
- for (i = 2; i < 8; i++) {
-
- if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == NULL) {
- if (dc_kbd_keycode[kbd->old[i]])
- input_report_key(dev, dc_kbd_keycode[kbd->old[i]], 0);
- else
- printk("Unknown key (scancode %#x) released.",
- kbd->old[i]);
- }
-
- if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) != NULL) {
- if(dc_kbd_keycode[kbd->new[i]])
- input_report_key(dev, dc_kbd_keycode[kbd->new[i]], 1);
- else
- printk("Unknown key (scancode %#x) pressed.",
- kbd->new[i]);
- }
- }
-
- input_sync(dev);
-
- memcpy(kbd->old, kbd->new, 8);
-}
-
-
-static void dc_kbd_callback(struct mapleq *mq)
-{
- struct maple_device *mapledev = mq->dev;
- struct dc_kbd *kbd = mapledev->private_data;
- unsigned long *buf = mq->recvbuf;
-
- if (buf[1] == mapledev->function) {
- memcpy(kbd->new, buf + 2, 8);
- dc_scan_kbd(kbd);
- }
-}
-
-static int dc_kbd_connect(struct maple_device *dev)
-{
- struct dc_kbd *kbd;
- struct input_dev *input_dev;
- unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
- int i;
-
- dev->private_data = kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!kbd || !input_dev) {
- kfree(kbd);
- input_free_device(input_dev);
- return -ENOMEM;
- }
-
- kbd->dev = input_dev;
-
- input_dev->name = dev->product_name;
- input_dev->id.bustype = BUS_MAPLE;
- input_dev->private = kbd;
- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- for (i = 0; i < 255; i++)
- set_bit(dc_kbd_keycode[i], input_dev->keybit);
- clear_bit(0, input_dev->keybit);
-
- input_register_device(kbd->dev);
-
- maple_getcond_callback(dev, dc_kbd_callback, 1, MAPLE_FUNC_KEYBOARD);
- return 0;
-}
-
-
-static void dc_kbd_disconnect(struct maple_device *dev)
-{
- struct dc_kbd *kbd = dev->private_data;
-
- input_unregister_device(kbd->dev);
- kfree(kbd);
-}
-
-
-static struct maple_driver dc_kbd_driver = {
- .function = MAPLE_FUNC_KEYBOARD,
- .name = "Dreamcast keyboard",
- .connect = dc_kbd_connect,
- .disconnect = dc_kbd_disconnect,
-};
-
-
-static int __init dc_kbd_init(void)
-{
- maple_register_driver(&dc_kbd_driver);
- return 0;
-}
-
-
-static void __exit dc_kbd_exit(void)
-{
- maple_unregister_driver(&dc_kbd_driver);
-}
-
-
-module_init(dc_kbd_init);
-module_exit(dc_kbd_exit);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
nkbd = kzalloc(sizeof(struct nkbd), GFP_KERNEL);
input_dev = input_allocate_device();
if (!nkbd || !input_dev)
- goto fail;
+ goto fail1;
nkbd->serio = serio;
nkbd->dev = input_dev;
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device(nkbd->dev);
+ if (err)
+ goto fail3;
- input_register_device(nkbd->dev);
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(nkbd);
return err;
}
static int __init nkbd_init(void)
{
- serio_register_driver(&nkbd_drv);
- return 0;
+ return serio_register_driver(&nkbd_drv);
}
static void __exit nkbd_exit(void)
{
struct spitzkbd *spitzkbd;
struct input_dev *input_dev;
- int i;
+ int i, err = -ENOMEM;
spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL);
- if (!spitzkbd)
- return -ENOMEM;
-
input_dev = input_allocate_device();
- if (!input_dev) {
- kfree(spitzkbd);
- return -ENOMEM;
- }
+ if (!spitzkbd || !input_dev)
+ goto fail;
platform_set_drvdata(dev, spitzkbd);
strcpy(spitzkbd->phys, "spitzkbd/input0");
set_bit(SW_TABLET_MODE, input_dev->swbit);
set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
- input_register_device(input_dev);
+ err = input_register_device(input_dev);
+ if (err)
+ goto fail;
mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd SWB", spitzkbd);
- request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
+ request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd HP", spitzkbd);
- printk(KERN_INFO "input: Spitz Keyboard Registered\n");
-
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(spitzkbd);
+ return err;
}
static int spitzkbd_remove(struct platform_device *dev)
.resume = spitzkbd_resume,
.driver = {
.name = "spitz-keyboard",
+ .owner = THIS_MODULE,
},
};
static int __init skbd_init(void)
{
- serio_register_driver(&skbd_drv);
- return 0;
+ return serio_register_driver(&skbd_drv);
}
static void __exit skbd_exit(void)
sunkbd = kzalloc(sizeof(struct sunkbd), GFP_KERNEL);
input_dev = input_allocate_device();
if (!sunkbd || !input_dev)
- goto fail;
+ goto fail1;
sunkbd->serio = serio;
sunkbd->dev = input_dev;
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
if (sunkbd_initialize(sunkbd) < 0) {
- serio_close(serio);
- goto fail;
+ err = -ENODEV;
+ goto fail3;
}
snprintf(sunkbd->name, sizeof(sunkbd->name), "Sun Type %d keyboard", sunkbd->type);
clear_bit(0, input_dev->keybit);
sunkbd_enable(sunkbd, 1);
- input_register_device(sunkbd->dev);
+
+ err = input_register_device(sunkbd->dev);
+ if (err)
+ goto fail4;
+
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail4: sunkbd_enable(sunkbd, 0);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(sunkbd);
return err;
}
static int __init sunkbd_init(void)
{
- serio_register_driver(&sunkbd_drv);
- return 0;
+ return serio_register_driver(&sunkbd_drv);
}
static void __exit sunkbd_exit(void)
xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL);
input_dev = input_allocate_device();
if (!xtkbd || !input_dev)
- goto fail;
+ goto fail1;
xtkbd->serio = serio;
xtkbd->dev = input_dev;
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device(xtkbd->dev);
+ if (err)
+ goto fail3;
- input_register_device(xtkbd->dev);
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(xtkbd);
return err;
}
static int __init xtkbd_init(void)
{
- serio_register_driver(&xtkbd_drv);
- return 0;
+ return serio_register_driver(&xtkbd_drv);
}
static void __exit xtkbd_exit(void)
static int __init amimouse_init(void)
{
+ int err;
+
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE))
return -ENODEV;
- if (!(amimouse_dev = input_allocate_device()))
+ amimouse_dev = input_allocate_device();
+ if (!amimouse_dev)
return -ENOMEM;
amimouse_dev->name = "Amiga mouse";
amimouse_dev->open = amimouse_open;
amimouse_dev->close = amimouse_close;
- input_register_device(amimouse_dev);
+ err = input_register_device(amimouse_dev);
+ if (err) {
+ input_free_device(amimouse_dev);
+ return err;
+ }
return 0;
}
static int __init hil_ptr_init(void)
{
- serio_register_driver(&hil_ptr_serio_driver);
- return 0;
+ return serio_register_driver(&hil_ptr_serio_driver);
}
static void __exit hil_ptr_exit(void)
static int __init inport_init(void)
{
unsigned char a, b, c;
+ int err;
if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) {
printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE);
b = inb(INPORT_SIGNATURE_PORT);
c = inb(INPORT_SIGNATURE_PORT);
if (a == b || a != c) {
- release_region(INPORT_BASE, INPORT_EXTENT);
printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
- return -ENODEV;
+ err = -ENODEV;
+ goto err_release_region;
}
- if (!(inport_dev = input_allocate_device())) {
+ inport_dev = input_allocate_device();
+ if (!inport_dev) {
printk(KERN_ERR "inport.c: Not enough memory for input device\n");
- release_region(INPORT_BASE, INPORT_EXTENT);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err_release_region;
}
inport_dev->name = INPORT_NAME;
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
- input_register_device(inport_dev);
+ err = input_register_device(inport_dev);
+ if (err)
+ goto err_free_dev;
return 0;
+
+ err_free_dev:
+ input_free_device(inport_dev);
+ err_release_region:
+ release_region(INPORT_BASE, INPORT_EXTENT);
+
+ return err;
}
static void __exit inport_exit(void)
#include "lifebook.h"
static struct dmi_system_id lifebook_dmi_table[] = {
- {
- .ident = "LifeBook B",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
- },
- },
- {
- .ident = "Lifebook B",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
- },
- },
- {
- .ident = "Lifebook B213x/B2150",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
- },
- },
- {
- .ident = "Zephyr",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
- },
- },
- {
- .ident = "CF-18",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
- },
- },
- {
- .ident = "Lifebook B142",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
- },
-
- },
- { }
+ {
+ .ident = "FLORA-ie 55mi",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"),
+ },
+ },
+ {
+ .ident = "LifeBook B",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
+ },
+ },
+ {
+ .ident = "Lifebook B",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
+ },
+ },
+ {
+ .ident = "Lifebook B213x/B2150",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
+ },
+ },
+ {
+ .ident = "Zephyr",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
+ },
+ },
+ {
+ .ident = "CF-18",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+ },
+ },
+ {
+ .ident = "Lifebook B142",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
+ },
+ },
+ { }
};
-
static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse)
{
unsigned char *packet = psmouse->packet;
static int __init logibm_init(void)
{
+ int err;
+
if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) {
printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE);
return -EBUSY;
udelay(100);
if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) {
- release_region(LOGIBM_BASE, LOGIBM_EXTENT);
printk(KERN_ERR "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
- return -ENODEV;
+ err = -ENODEV;
+ goto err_release_region;
}
outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT);
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
- if (!(logibm_dev = input_allocate_device())) {
+ logibm_dev = input_allocate_device();
+ if (!logibm_dev) {
printk(KERN_ERR "logibm.c: Not enough memory for input device\n");
- release_region(LOGIBM_BASE, LOGIBM_EXTENT);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err_release_region;
}
logibm_dev->name = "Logitech bus mouse";
logibm_dev->open = logibm_open;
logibm_dev->close = logibm_close;
- input_register_device(logibm_dev);
+ err = input_register_device(logibm_dev);
+ if (err)
+ goto err_free_dev;
return 0;
+
+ err_free_dev:
+ input_free_device(logibm_dev);
+ err_release_region:
+ release_region(LOGIBM_BASE, LOGIBM_EXTENT);
+
+ return err;
}
static void __exit logibm_exit(void)
unsigned char model, buttons;
const struct ps2pp_info *model_info;
int use_ps2pp = 0;
+ int error;
param[0] = 0;
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
psmouse->set_resolution = ps2pp_set_resolution;
psmouse->disconnect = ps2pp_disconnect;
- device_create_file(&psmouse->ps2dev.serio->dev,
- &psmouse_attr_smartscroll.dattr);
+ error = device_create_file(&psmouse->ps2dev.serio->dev,
+ &psmouse_attr_smartscroll.dattr);
+ if (error) {
+ printk(KERN_ERR
+ "logips2pp.c: failed to create smartscroll "
+ "sysfs attribute, error: %d\n", error);
+ return -1;
+ }
}
}
static int __init pc110pad_init(void)
{
struct pci_dev *dev;
+ int err;
dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
if (dev) {
outb(PC110PAD_OFF, pc110pad_io + 2);
if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL)) {
- release_region(pc110pad_io, 4);
printk(KERN_ERR "pc110pad: Unable to get irq %d.\n", pc110pad_irq);
- return -EBUSY;
+ err = -EBUSY;
+ goto err_release_region;
}
- if (!(pc110pad_dev = input_allocate_device())) {
- free_irq(pc110pad_irq, NULL);
- release_region(pc110pad_io, 4);
+ pc110pad_dev = input_allocate_device();
+ if (!pc110pad_dev) {
printk(KERN_ERR "pc110pad: Not enough memory.\n");
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err_free_irq;
}
pc110pad_dev->name = "IBM PC110 TouchPad";
pc110pad_dev->open = pc110pad_open;
pc110pad_dev->close = pc110pad_close;
- input_register_device(pc110pad_dev);
+ err = input_register_device(pc110pad_dev);
+ if (err)
+ goto err_free_dev;
return 0;
+
+ err_free_dev:
+ input_free_device(pc110pad_dev);
+ err_free_irq:
+ free_irq(pc110pad_irq, NULL);
+ err_release_region:
+ release_region(pc110pad_io, 4);
+
+ return err;
}
static void __exit pc110pad_exit(void)
{
struct psmouse *psmouse, *parent = NULL;
struct input_dev *input_dev;
- int retval = -ENOMEM;
+ int retval = 0, error = -ENOMEM;
mutex_lock(&psmouse_mutex);
psmouse = kzalloc(sizeof(struct psmouse), GFP_KERNEL);
input_dev = input_allocate_device();
if (!psmouse || !input_dev)
- goto out;
+ goto err_free;
ps2_init(&psmouse->ps2dev, serio);
INIT_WORK(&psmouse->resync_work, psmouse_resync);
serio_set_drvdata(serio, psmouse);
- retval = serio_open(serio, drv);
- if (retval)
- goto out;
+ error = serio_open(serio, drv);
+ if (error)
+ goto err_clear_drvdata;
if (psmouse_probe(psmouse) < 0) {
- serio_close(serio);
- retval = -ENODEV;
- goto out;
+ error = -ENODEV;
+ goto err_close_serio;
}
psmouse->rate = psmouse_rate;
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
psmouse_initialize(psmouse);
- input_register_device(psmouse->dev);
+ error = input_register_device(psmouse->dev);
+ if (error)
+ goto err_protocol_disconnect;
if (parent && parent->pt_activate)
parent->pt_activate(parent);
- sysfs_create_group(&serio->dev.kobj, &psmouse_attribute_group);
+ error = sysfs_create_group(&serio->dev.kobj, &psmouse_attribute_group);
+ if (error)
+ goto err_pt_deactivate;
psmouse_activate(psmouse);
- retval = 0;
-
-out:
- if (retval) {
- serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
- kfree(psmouse);
- }
-
+ out:
/* If this is a pass-through port the parent needs to be re-activated */
if (parent)
psmouse_activate(parent);
mutex_unlock(&psmouse_mutex);
return retval;
+
+ err_pt_deactivate:
+ if (parent && parent->pt_deactivate)
+ parent->pt_deactivate(parent);
+ err_protocol_disconnect:
+ if (psmouse->disconnect)
+ psmouse->disconnect(psmouse);
+ psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+ err_close_serio:
+ serio_close(serio);
+ err_clear_drvdata:
+ serio_set_drvdata(serio, NULL);
+ err_free:
+ input_free_device(input_dev);
+ kfree(psmouse);
+
+ retval = error;
+ goto out;
}
static ssize_t psmouse_show_int_attr(struct psmouse *psmouse, void *offset, char *buf)
{
- unsigned long *field = (unsigned long *)((char *)psmouse + (size_t)offset);
+ unsigned int *field = (unsigned int *)((char *)psmouse + (size_t)offset);
- return sprintf(buf, "%lu\n", *field);
+ return sprintf(buf, "%u\n", *field);
}
static ssize_t psmouse_set_int_attr(struct psmouse *psmouse, void *offset, const char *buf, size_t count)
{
- unsigned long *field = (unsigned long *)((char *)psmouse + (size_t)offset);
+ unsigned int *field = (unsigned int *)((char *)psmouse + (size_t)offset);
unsigned long value;
char *rest;
if (*rest)
return -EINVAL;
+ if ((unsigned int)value != value)
+ return -EINVAL;
+
*field = value;
return count;
{
struct serio *serio = psmouse->ps2dev.serio;
struct psmouse *parent = NULL;
- struct input_dev *new_dev;
- const struct psmouse_protocol *proto;
+ struct input_dev *old_dev, *new_dev;
+ const struct psmouse_protocol *proto, *old_proto;
+ int error;
int retry = 0;
- if (!(proto = psmouse_protocol_by_name(buf, count)))
+ proto = psmouse_protocol_by_name(buf, count);
+ if (!proto)
return -EINVAL;
if (psmouse->type == proto->type)
return count;
- if (!(new_dev = input_allocate_device()))
+ new_dev = input_allocate_device();
+ if (!new_dev)
return -ENOMEM;
while (serio->child) {
parent->pt_deactivate(parent);
}
+ old_dev = psmouse->dev;
+ old_proto = psmouse_protocol_by_type(psmouse->type);
+
if (psmouse->disconnect)
psmouse->disconnect(psmouse);
psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- input_unregister_device(psmouse->dev);
psmouse->dev = new_dev;
psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
psmouse_initialize(psmouse);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
- input_register_device(psmouse->dev);
+ error = input_register_device(psmouse->dev);
+ if (error) {
+ if (psmouse->disconnect)
+ psmouse->disconnect(psmouse);
+
+ psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+ input_free_device(new_dev);
+ psmouse->dev = old_dev;
+ psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
+ psmouse_switch_protocol(psmouse, old_proto);
+ psmouse_initialize(psmouse);
+ psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
+
+ return error;
+ }
+
+ input_unregister_device(old_dev);
if (parent && parent->pt_activate)
parent->pt_activate(parent);
static int __init psmouse_init(void)
{
+ int err;
+
kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
if (!kpsmoused_wq) {
printk(KERN_ERR "psmouse: failed to create kpsmoused workqueue\n");
return -ENOMEM;
}
- serio_register_driver(&psmouse_drv);
+ err = serio_register_driver(&psmouse_drv);
+ if (err)
+ destroy_workqueue(kpsmoused_wq);
- return 0;
+ return err;
}
static void __exit psmouse_exit(void)
static int __init rpcmouse_init(void)
{
- if (!(rpcmouse_dev = input_allocate_device()))
+ int err;
+
+ rpcmouse_dev = input_allocate_device();
+ if (!rpcmouse_dev)
return -ENOMEM;
rpcmouse_dev->name = "Acorn RiscPC Mouse";
if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, IRQF_SHARED, "rpcmouse", rpcmouse_dev)) {
printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n");
- input_free_device(rpcmouse_dev);
- return -EBUSY;
+ err = -EBUSY;
+ goto err_free_dev;
}
- input_register_device(rpcmouse_dev);
+ err = input_register_device(rpcmouse_dev);
+ if (err)
+ goto err_free_irq;
return 0;
+
+ err_free_irq:
+ free_irq(IRQ_VSYNCPULSE, rpcmouse_dev);
+ err_free_dev:
+ input_free_device(rpcmouse_dev);
+
+ return err;
}
static void __exit rpcmouse_exit(void)
sermouse = kzalloc(sizeof(struct sermouse), GFP_KERNEL);
input_dev = input_allocate_device();
if (!sermouse || !input_dev)
- goto fail;
+ goto fail1;
sermouse->dev = input_dev;
snprintf(sermouse->phys, sizeof(sermouse->phys), "%s/input0", serio->phys);
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
- input_register_device(sermouse->dev);
+ err = input_register_device(sermouse->dev);
+ if (err)
+ goto fail3;
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(sermouse);
return err;
}
static int __init sermouse_init(void)
{
- serio_register_driver(&sermouse_drv);
- return 0;
+ return serio_register_driver(&sermouse_drv);
}
static void __exit sermouse_exit(void)
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char firmware_id;
unsigned char button_info;
+ int error;
if (trackpoint_start_protocol(psmouse, &firmware_id))
return -1;
button_info = 0;
}
- psmouse->private = priv = kcalloc(1, sizeof(struct trackpoint_data), GFP_KERNEL);
+ psmouse->private = priv = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL);
if (!priv)
return -1;
trackpoint_defaults(priv);
trackpoint_sync(psmouse);
- sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group);
+ error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group);
+ if (error) {
+ printk(KERN_ERR
+ "trackpoint.c: failed to create sysfs attributes, error: %d\n",
+ error);
+ kfree(priv);
+ return -1;
+ }
printk(KERN_INFO "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n",
firmware_id, (button_info & 0xf0) >> 4, button_info & 0x0f);
mouse = kzalloc (sizeof (struct vsxxxaa), GFP_KERNEL);
input_dev = input_allocate_device ();
if (!mouse || !input_dev)
- goto fail;
+ goto fail1;
mouse->dev = input_dev;
mouse->serio = serio;
err = serio_open (serio, drv);
if (err)
- goto fail;
+ goto fail2;
/*
* Request selftest. Standard packet format and differential
*/
serio->write (serio, 'T'); /* Test */
- input_register_device (input_dev);
+ err = input_register_device (input_dev);
+ if (err)
+ goto fail3;
return 0;
- fail: serio_set_drvdata (serio, NULL);
- input_free_device (input_dev);
+ fail3: serio_close (serio);
+ fail2: serio_set_drvdata (serio, NULL);
+ fail1: input_free_device (input_dev);
kfree (mouse);
return err;
}
static int __init
vsxxxaa_init (void)
{
- serio_register_driver(&vsxxxaa_drv);
- return 0;
+ return serio_register_driver(&vsxxxaa_drv);
}
static void __exit
switch (code) {
case BTN_TOUCH:
case BTN_0:
- case BTN_FORWARD:
case BTN_LEFT: index = 0; break;
case BTN_STYLUS:
case BTN_1:
case BTN_RIGHT: index = 1; break;
case BTN_2:
+ case BTN_FORWARD:
case BTN_STYLUS2:
case BTN_MIDDLE: index = 2; break;
case BTN_3:
},
},
{
+ .ident = "Fujitsu Lifebook P7010",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "0000000000"),
+ },
+ },
+ {
.ident = "Fujitsu Lifebook P5020D",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
static int i8042_aux_write(struct serio *serio, unsigned char c)
{
struct i8042_port *port = serio->port_data;
- int retval;
-
-/*
- * Send the byte out.
- */
-
- if (port->mux == -1)
- retval = i8042_command(&c, I8042_CMD_AUX_SEND);
- else
- retval = i8042_command(&c, I8042_CMD_MUX_SEND + port->mux);
-
-/*
- * Make sure the interrupt happens and the character is received even
- * in the case the IRQ isn't wired, so that we can receive further
- * characters later.
- */
- i8042_interrupt(0, NULL);
- return retval;
+ return i8042_command(&c, port->mux == -1 ?
+ I8042_CMD_AUX_SEND :
+ I8042_CMD_MUX_SEND + port->mux);
}
/*
dfl = 0;
if (str & I8042_STR_MUXERR) {
dbg("MUX error, status is %02x, data is %02x", str, data);
- switch (data) {
- default:
/*
* When MUXERR condition is signalled the data register can only contain
* 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
- * it is not always the case. Some KBC just get confused which port the
- * data came from and signal error leaving the data intact. They _do not_
- * revert to legacy mode (actually I've never seen KBC reverting to legacy
- * mode yet, when we see one we'll add proper handling).
- * Anyway, we will assume that the data came from the same serio last byte
+ * it is not always the case. Some KBCs also report 0xfc when there is
+ * nothing connected to the port while others sometimes get confused which
+ * port the data came from and signal error leaving the data intact. They
+ * _do not_ revert to legacy mode (actually I've never seen KBC reverting
+ * to legacy mode yet, when we see one we'll add proper handling).
+ * Anyway, we process 0xfc, 0xfd, 0xfe and 0xff as timeouts, and for the
+ * rest assume that the data came from the same serio last byte
* was transmitted (if transmission happened not too long ago).
*/
+
+ switch (data) {
+ default:
if (time_before(jiffies, last_transmit + HZ/10)) {
str = last_str;
break;
}
/* fall through - report timeout */
+ case 0xfc:
case 0xfd:
case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break;
case 0xff: dfl = SERIO_PARITY; data = 0xfe; break;
EXPORT_SYMBOL(__serio_register_port);
EXPORT_SYMBOL(serio_unregister_port);
EXPORT_SYMBOL(serio_unregister_child_port);
-EXPORT_SYMBOL(__serio_unregister_port_delayed);
-EXPORT_SYMBOL(__serio_register_driver);
+EXPORT_SYMBOL(serio_register_driver);
EXPORT_SYMBOL(serio_unregister_driver);
EXPORT_SYMBOL(serio_open);
EXPORT_SYMBOL(serio_close);
static struct bus_type serio_bus;
-static void serio_add_driver(struct serio_driver *drv);
static void serio_add_port(struct serio *serio);
-static void serio_destroy_port(struct serio *serio);
static void serio_reconnect_port(struct serio *serio);
static void serio_disconnect_port(struct serio *serio);
+static void serio_attach_driver(struct serio_driver *drv);
static int serio_connect_driver(struct serio *serio, struct serio_driver *drv)
{
*/
enum serio_event_type {
- SERIO_RESCAN,
- SERIO_RECONNECT,
+ SERIO_RESCAN_PORT,
+ SERIO_RECONNECT_PORT,
SERIO_REGISTER_PORT,
- SERIO_UNREGISTER_PORT,
- SERIO_REGISTER_DRIVER,
+ SERIO_ATTACH_DRIVER,
};
struct serio_event {
static DECLARE_WAIT_QUEUE_HEAD(serio_wait);
static struct task_struct *serio_task;
-static void serio_queue_event(void *object, struct module *owner,
- enum serio_event_type event_type)
+static int serio_queue_event(void *object, struct module *owner,
+ enum serio_event_type event_type)
{
unsigned long flags;
struct serio_event *event;
+ int retval = 0;
spin_lock_irqsave(&serio_event_lock, flags);
}
}
- if ((event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC))) {
- if (!try_module_get(owner)) {
- printk(KERN_WARNING "serio: Can't get module reference, dropping event %d\n", event_type);
- kfree(event);
- goto out;
- }
-
- event->type = event_type;
- event->object = object;
- event->owner = owner;
+ event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC);
+ if (!event) {
+ printk(KERN_ERR
+ "serio: Not enough memory to queue event %d\n",
+ event_type);
+ retval = -ENOMEM;
+ goto out;
+ }
- list_add_tail(&event->node, &serio_event_list);
- wake_up(&serio_wait);
- } else {
- printk(KERN_ERR "serio: Not enough memory to queue event %d\n", event_type);
+ if (!try_module_get(owner)) {
+ printk(KERN_WARNING
+ "serio: Can't get module reference, dropping event %d\n",
+ event_type);
+ kfree(event);
+ retval = -EINVAL;
+ goto out;
}
+
+ event->type = event_type;
+ event->object = object;
+ event->owner = owner;
+
+ list_add_tail(&event->node, &serio_event_list);
+ wake_up(&serio_wait);
+
out:
spin_unlock_irqrestore(&serio_event_lock, flags);
+ return retval;
}
static void serio_free_event(struct serio_event *event)
serio_add_port(event->object);
break;
- case SERIO_UNREGISTER_PORT:
- serio_disconnect_port(event->object);
- serio_destroy_port(event->object);
- break;
-
- case SERIO_RECONNECT:
+ case SERIO_RECONNECT_PORT:
serio_reconnect_port(event->object);
break;
- case SERIO_RESCAN:
+ case SERIO_RESCAN_PORT:
serio_disconnect_port(event->object);
serio_find_driver(event->object);
break;
- case SERIO_REGISTER_DRIVER:
- serio_add_driver(event->object);
+ case SERIO_ATTACH_DRIVER:
+ serio_attach_driver(event->object);
break;
default:
void serio_rescan(struct serio *serio)
{
- serio_queue_event(serio, NULL, SERIO_RESCAN);
+ serio_queue_event(serio, NULL, SERIO_RESCAN_PORT);
}
void serio_reconnect(struct serio *serio)
{
- serio_queue_event(serio, NULL, SERIO_RECONNECT);
+ serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT);
}
/*
mutex_unlock(&serio_mutex);
}
-/*
- * Submits register request to kseriod for subsequent execution.
- * Can be used when it is not obvious whether the serio_mutex is
- * taken or not and when delayed execution is feasible.
- */
-void __serio_unregister_port_delayed(struct serio *serio, struct module *owner)
-{
- serio_queue_event(serio, owner, SERIO_UNREGISTER_PORT);
-}
-
/*
* Serio driver operations
return 0;
}
-static struct bus_type serio_bus = {
- .name = "serio",
- .probe = serio_driver_probe,
- .remove = serio_driver_remove,
-};
-
-static void serio_add_driver(struct serio_driver *drv)
+static void serio_attach_driver(struct serio_driver *drv)
{
int error;
- error = driver_register(&drv->driver);
+ error = driver_attach(&drv->driver);
if (error)
- printk(KERN_ERR
- "serio: driver_register() failed for %s, error: %d\n",
+ printk(KERN_WARNING
+ "serio: driver_attach() failed for %s with error %d\n",
drv->driver.name, error);
}
-void __serio_register_driver(struct serio_driver *drv, struct module *owner)
+int serio_register_driver(struct serio_driver *drv)
{
+ int manual_bind = drv->manual_bind;
+ int error;
+
drv->driver.bus = &serio_bus;
- serio_queue_event(drv, owner, SERIO_REGISTER_DRIVER);
+ /*
+ * Temporarily disable automatic binding because probing
+ * takes long time and we are better off doing it in kseriod
+ */
+ drv->manual_bind = 1;
+
+ error = driver_register(&drv->driver);
+ if (error) {
+ printk(KERN_ERR
+ "serio: driver_register() failed for %s, error: %d\n",
+ drv->driver.name, error);
+ return error;
+ }
+
+ /*
+ * Restore original bind mode and let kseriod bind the
+ * driver to free ports
+ */
+ if (!manual_bind) {
+ drv->manual_bind = 0;
+ error = serio_queue_event(drv, NULL, SERIO_ATTACH_DRIVER);
+ if (error) {
+ driver_unregister(&drv->driver);
+ return error;
+ }
+ }
+
+ return 0;
}
void serio_unregister_driver(struct serio_driver *drv)
return ret;
}
+static struct bus_type serio_bus = {
+ .name = "serio",
+ .dev_attrs = serio_device_attrs,
+ .drv_attrs = serio_driver_attrs,
+ .match = serio_bus_match,
+ .uevent = serio_uevent,
+ .probe = serio_driver_probe,
+ .remove = serio_driver_remove,
+ .resume = serio_resume,
+};
+
static int __init serio_init(void)
{
int error;
- serio_bus.dev_attrs = serio_device_attrs;
- serio_bus.drv_attrs = serio_driver_attrs;
- serio_bus.match = serio_bus_match;
- serio_bus.uevent = serio_uevent;
- serio_bus.resume = serio_resume;
error = bus_register(&serio_bus);
if (error) {
printk(KERN_ERR "serio: failed to register serio bus, error: %d\n", error);
static int __init serio_raw_init(void)
{
- serio_register_driver(&serio_raw_drv);
- return 0;
+ return serio_register_driver(&serio_raw_drv);
}
static void __exit serio_raw_exit(void)
To compile this driver as a module, choose M here: the
module will be called touchwin.
+config TOUCHSCREEN_UCB1400
+ tristate "Philips UCB1400 touchscreen"
+ select AC97_BUS
+ help
+ This enables support for the Philips UCB1400 touchscreen interface.
+ The UCB1400 is an AC97 audio codec. The touchscreen interface
+ will be initialized only after the ALSA subsystem has been
+ brought up and the UCB1400 detected. You therefore have to
+ configure ALSA support as well (either built-in or modular,
+ independently of whether this driver is itself built-in or
+ modular) for this driver to work.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_ts.
+
endif
obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
+obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
char phys[32];
struct spi_device *spi;
+ struct attribute_group *attr_group;
u16 model;
u16 vref_delay_usecs;
u16 x_plate_ohms;
static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+static struct attribute *ads7846_attributes[] = {
+ &dev_attr_temp0.attr,
+ &dev_attr_temp1.attr,
+ &dev_attr_vbatt.attr,
+ &dev_attr_vaux.attr,
+ &dev_attr_pen_down.attr,
+ &dev_attr_disable.attr,
+ NULL,
+};
+
+static struct attribute_group ads7846_attr_group = {
+ .attrs = ads7846_attributes,
+};
+
+/*
+ * ads7843/7845 don't have temperature sensors, and
+ * use the other sensors a bit differently too
+ */
+
+static struct attribute *ads7843_attributes[] = {
+ &dev_attr_vbatt.attr,
+ &dev_attr_vaux.attr,
+ &dev_attr_pen_down.attr,
+ &dev_attr_disable.attr,
+ NULL,
+};
+
+static struct attribute_group ads7843_attr_group = {
+ .attrs = ads7843_attributes,
+};
+
+static struct attribute *ads7845_attributes[] = {
+ &dev_attr_vaux.attr,
+ &dev_attr_pen_down.attr,
+ &dev_attr_disable.attr,
+ NULL,
+};
+
+static struct attribute_group ads7845_attr_group = {
+ .attrs = ads7845_attributes,
+};
+
/*--------------------------------------------------------------------------*/
/*
(void) ads7846_read12_ser(&spi->dev,
READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
- /* ads7843/7845 don't have temperature sensors, and
- * use the other sensors a bit differently too
- */
- if (ts->model == 7846) {
- device_create_file(&spi->dev, &dev_attr_temp0);
- device_create_file(&spi->dev, &dev_attr_temp1);
+ switch (ts->model) {
+ case 7846:
+ ts->attr_group = &ads7846_attr_group;
+ break;
+ case 7845:
+ ts->attr_group = &ads7845_attr_group;
+ break;
+ default:
+ ts->attr_group = &ads7843_attr_group;
+ break;
}
- if (ts->model != 7845)
- device_create_file(&spi->dev, &dev_attr_vbatt);
- device_create_file(&spi->dev, &dev_attr_vaux);
-
- device_create_file(&spi->dev, &dev_attr_pen_down);
-
- device_create_file(&spi->dev, &dev_attr_disable);
+ err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
+ if (err)
+ goto err_free_irq;
err = input_register_device(input_dev);
if (err)
- goto err_remove_attr;
+ goto err_remove_attr_group;
return 0;
- err_remove_attr:
- device_remove_file(&spi->dev, &dev_attr_disable);
- device_remove_file(&spi->dev, &dev_attr_pen_down);
- if (ts->model == 7846) {
- device_remove_file(&spi->dev, &dev_attr_temp1);
- device_remove_file(&spi->dev, &dev_attr_temp0);
- }
- if (ts->model != 7845)
- device_remove_file(&spi->dev, &dev_attr_vbatt);
- device_remove_file(&spi->dev, &dev_attr_vaux);
-
+ err_remove_attr_group:
+ sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+ err_free_irq:
free_irq(spi->irq, ts);
err_free_mem:
input_free_device(input_dev);
ads7846_suspend(spi, PMSG_SUSPEND);
- device_remove_file(&spi->dev, &dev_attr_disable);
- device_remove_file(&spi->dev, &dev_attr_pen_down);
- if (ts->model == 7846) {
- device_remove_file(&spi->dev, &dev_attr_temp1);
- device_remove_file(&spi->dev, &dev_attr_temp0);
- }
- if (ts->model != 7845)
- device_remove_file(&spi->dev, &dev_attr_vbatt);
- device_remove_file(&spi->dev, &dev_attr_vaux);
+ sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
free_irq(ts->spi->irq, ts);
/* suspend left the IRQ disabled */
static void new_data(struct corgi_ts *corgi_ts)
{
+ struct input_dev *dev = corgi_ts->input;
+
if (corgi_ts->power_mode != PWR_MODE_ACTIVE)
return;
if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0)
return;
- input_report_abs(corgi_ts->input, ABS_X, corgi_ts->tc.x);
- input_report_abs(corgi_ts->input, ABS_Y, corgi_ts->tc.y);
- input_report_abs(corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure);
- input_report_key(corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0));
- input_sync(corgi_ts->input);
+ input_report_abs(dev, ABS_X, corgi_ts->tc.x);
+ input_report_abs(dev, ABS_Y, corgi_ts->tc.y);
+ input_report_abs(dev, ABS_PRESSURE, corgi_ts->tc.pressure);
+ input_report_key(dev, BTN_TOUCH, corgi_ts->pendown);
+ input_sync(dev);
}
static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
static void corgi_ts_timer(unsigned long data)
{
struct corgi_ts *corgits_data = (struct corgi_ts *) data;
+
ts_interrupt_main(corgits_data, 1);
}
static irqreturn_t ts_interrupt(int irq, void *dev_id)
{
struct corgi_ts *corgits_data = dev_id;
+
ts_interrupt_main(corgits_data, 0);
return IRQ_HANDLED;
}
corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL);
input_dev = input_allocate_device();
if (!corgi_ts || !input_dev)
- goto fail;
+ goto fail1;
platform_set_drvdata(pdev, corgi_ts);
if (corgi_ts->irq_gpio < 0) {
err = -ENODEV;
- goto fail;
+ goto fail1;
}
corgi_ts->input = input_dev;
if (request_irq(corgi_ts->irq_gpio, ts_interrupt, IRQF_DISABLED, "ts", corgi_ts)) {
err = -EBUSY;
- goto fail;
+ goto fail1;
}
- input_register_device(corgi_ts->input);
+ err = input_register_device(corgi_ts->input);
+ if (err)
+ goto fail2;
corgi_ts->power_mode = PWR_MODE_ACTIVE;
return 0;
- fail: input_free_device(input_dev);
+ fail2: free_irq(corgi_ts->irq_gpio, corgi_ts);
+ fail1: input_free_device(input_dev);
kfree(corgi_ts);
return err;
-
}
static int corgits_remove(struct platform_device *pdev)
{
struct corgi_ts *corgi_ts = platform_get_drvdata(pdev);
- free_irq(corgi_ts->irq_gpio, NULL);
+ free_irq(corgi_ts->irq_gpio, corgi_ts);
del_timer_sync(&corgi_ts->timer);
corgi_ts->machinfo->put_hsync();
input_unregister_device(corgi_ts->input);
static int __init elo_init(void)
{
- serio_register_driver(&elo_drv);
- return 0;
+ return serio_register_driver(&elo_drv);
}
static void __exit elo_exit(void)
input_dev = input_allocate_device();
if (!gunze || !input_dev) {
err = -ENOMEM;
- goto fail;
+ goto fail1;
}
gunze->serio = serio;
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
+
+ err = input_register_device(gunze->dev);
+ if (err)
+ goto fail3;
- input_register_device(gunze->dev);
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(gunze);
return err;
}
static int __init gunze_init(void)
{
- serio_register_driver(&gunze_drv);
- return 0;
+ return serio_register_driver(&gunze_drv);
}
static void __exit gunze_exit(void)
static int __init h3600ts_init(void)
{
- serio_register_driver(&h3600ts_drv);
- return 0;
+ return serio_register_driver(&h3600ts_drv);
}
static void __exit h3600ts_exit(void)
static int __init hp680_ts_init(void)
{
+ int err;
+
hp680_ts_dev = input_allocate_device();
if (!hp680_ts_dev)
return -ENOMEM;
hp680_ts_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
- hp680_ts_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
hp680_ts_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- hp680_ts_dev->absmin[ABS_X] = HP680_TS_ABS_X_MIN;
- hp680_ts_dev->absmin[ABS_Y] = HP680_TS_ABS_Y_MIN;
- hp680_ts_dev->absmax[ABS_X] = HP680_TS_ABS_X_MAX;
- hp680_ts_dev->absmax[ABS_Y] = HP680_TS_ABS_Y_MAX;
+ input_set_abs_params(hp680_ts_dev, ABS_X,
+ HP680_TS_ABS_X_MIN, HP680_TS_ABS_X_MAX, 0, 0);
+ input_set_abs_params(hp680_ts_dev, ABS_Y,
+ HP680_TS_ABS_Y_MIN, HP680_TS_ABS_Y_MAX, 0, 0);
hp680_ts_dev->name = "HP Jornada touchscreen";
hp680_ts_dev->phys = "hp680_ts/input0";
- input_register_device(hp680_ts_dev);
-
if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt,
IRQF_DISABLED, MODNAME, 0) < 0) {
printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n",
HP680_TS_IRQ);
- input_unregister_device(hp680_ts_dev);
- return -EBUSY;
+ err = -EBUSY;
+ goto fail1;
}
+ err = input_register_device(hp680_ts_dev);
+ if (err)
+ goto fail2;
+
return 0;
+
+ fail2: free_irq(HP680_TS_IRQ, NULL);
+ cancel_delayed_work(&work);
+ flush_scheduled_work();
+ fail1: input_free_device(hp680_ts_dev);
+ return err;
}
static void __exit hp680_ts_exit(void)
{
- free_irq(HP680_TS_IRQ, 0);
+ free_irq(HP680_TS_IRQ, NULL);
cancel_delayed_work(&work);
flush_scheduled_work();
input_unregister_device(hp680_ts_dev);
goto end;
}
- if (~status & MK712_STATUS_TOUCH)
- {
+ if (~status & MK712_STATUS_TOUCH) {
debounce = 1;
input_report_key(mk712_dev, BTN_TOUCH, 0);
goto end;
}
- if (debounce)
- {
+ if (debounce) {
debounce = 0;
goto end;
}
input_report_abs(mk712_dev, ABS_X, last_x);
input_report_abs(mk712_dev, ABS_Y, last_y);
-end:
-
+ end:
last_x = inw(mk712_io + MK712_X) & 0x0fff;
last_y = inw(mk712_io + MK712_Y) & 0x0fff;
input_sync(mk712_dev);
(inw(mk712_io + MK712_STATUS) & 0xf333)) {
printk(KERN_WARNING "mk712: device not present\n");
err = -ENODEV;
- goto fail;
+ goto fail1;
}
- if (!(mk712_dev = input_allocate_device())) {
+ mk712_dev = input_allocate_device();
+ if (!mk712_dev) {
printk(KERN_ERR "mk712: not enough memory\n");
err = -ENOMEM;
- goto fail;
+ goto fail1;
}
mk712_dev->name = "ICS MicroClock MK712 TouchScreen";
if (request_irq(mk712_irq, mk712_interrupt, 0, "mk712", mk712_dev)) {
printk(KERN_WARNING "mk712: unable to get IRQ\n");
err = -EBUSY;
- goto fail;
+ goto fail1;
}
- input_register_device(mk712_dev);
+ err = input_register_device(mk712_dev);
+ if (err)
+ goto fail2;
+
return 0;
- fail: input_free_device(mk712_dev);
+ fail2: free_irq(mk712_irq, mk712_dev);
+ fail1: input_free_device(mk712_dev);
release_region(mk712_io, 8);
return err;
}
input_dev = input_allocate_device();
if (!mtouch || !input_dev) {
err = -ENOMEM;
- goto fail;
+ goto fail1;
}
mtouch->serio = serio;
err = serio_open(serio, drv);
if (err)
- goto fail;
+ goto fail2;
- input_register_device(mtouch->dev);
+ err = input_register_device(mtouch->dev);
+ if (err)
+ goto fail3;
return 0;
- fail: serio_set_drvdata(serio, NULL);
- input_free_device(input_dev);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
kfree(mtouch);
return err;
}
static int __init mtouch_init(void)
{
- serio_register_driver(&mtouch_drv);
- return 0;
+ return serio_register_driver(&mtouch_drv);
}
static void __exit mtouch_exit(void)
static int __init pm_init(void)
{
- serio_register_driver(&pm_drv);
- return 0;
+ return serio_register_driver(&pm_drv);
}
static void __exit pm_exit(void)
static int __init tr_init(void)
{
- serio_register_driver(&tr_drv);
- return 0;
+ return serio_register_driver(&tr_drv);
}
static void __exit tr_exit(void)
static int __init tw_init(void)
{
- serio_register_driver(&tw_drv);
- return 0;
+ return serio_register_driver(&tw_drv);
}
static void __exit tw_exit(void)
--- /dev/null
+/*
+ * Philips UCB1400 touchscreen driver
+ *
+ * Author: Nicolas Pitre
+ * Created: September 25, 2006
+ * Copyright: MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
+ * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
+ * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/suspend.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/ac97_codec.h>
+
+
+/*
+ * Interesting UCB1400 AC-link registers
+ */
+
+#define UCB_IE_RIS 0x5e
+#define UCB_IE_FAL 0x60
+#define UCB_IE_STATUS 0x62
+#define UCB_IE_CLEAR 0x62
+#define UCB_IE_ADC (1 << 11)
+#define UCB_IE_TSPX (1 << 12)
+
+#define UCB_TS_CR 0x64
+#define UCB_TS_CR_TSMX_POW (1 << 0)
+#define UCB_TS_CR_TSPX_POW (1 << 1)
+#define UCB_TS_CR_TSMY_POW (1 << 2)
+#define UCB_TS_CR_TSPY_POW (1 << 3)
+#define UCB_TS_CR_TSMX_GND (1 << 4)
+#define UCB_TS_CR_TSPX_GND (1 << 5)
+#define UCB_TS_CR_TSMY_GND (1 << 6)
+#define UCB_TS_CR_TSPY_GND (1 << 7)
+#define UCB_TS_CR_MODE_INT (0 << 8)
+#define UCB_TS_CR_MODE_PRES (1 << 8)
+#define UCB_TS_CR_MODE_POS (2 << 8)
+#define UCB_TS_CR_BIAS_ENA (1 << 11)
+#define UCB_TS_CR_TSPX_LOW (1 << 12)
+#define UCB_TS_CR_TSMX_LOW (1 << 13)
+
+#define UCB_ADC_CR 0x66
+#define UCB_ADC_SYNC_ENA (1 << 0)
+#define UCB_ADC_VREFBYP_CON (1 << 1)
+#define UCB_ADC_INP_TSPX (0 << 2)
+#define UCB_ADC_INP_TSMX (1 << 2)
+#define UCB_ADC_INP_TSPY (2 << 2)
+#define UCB_ADC_INP_TSMY (3 << 2)
+#define UCB_ADC_INP_AD0 (4 << 2)
+#define UCB_ADC_INP_AD1 (5 << 2)
+#define UCB_ADC_INP_AD2 (6 << 2)
+#define UCB_ADC_INP_AD3 (7 << 2)
+#define UCB_ADC_EXT_REF (1 << 5)
+#define UCB_ADC_START (1 << 7)
+#define UCB_ADC_ENA (1 << 15)
+
+#define UCB_ADC_DATA 0x68
+#define UCB_ADC_DAT_VALID (1 << 15)
+#define UCB_ADC_DAT_VALUE(x) ((x) & 0x3ff)
+
+#define UCB_ID 0x7e
+#define UCB_ID_1400 0x4304
+
+
+struct ucb1400 {
+ ac97_t *ac97;
+ struct input_dev *ts_idev;
+
+ int irq;
+
+ wait_queue_head_t ts_wait;
+ struct task_struct *ts_task;
+
+ unsigned int irq_pending; /* not bit field shared */
+ unsigned int ts_restart:1;
+ unsigned int adcsync:1;
+};
+
+static int adcsync;
+
+static inline u16 ucb1400_reg_read(struct ucb1400 *ucb, u16 reg)
+{
+ return ucb->ac97->bus->ops->read(ucb->ac97, reg);
+}
+
+static inline void ucb1400_reg_write(struct ucb1400 *ucb, u16 reg, u16 val)
+{
+ ucb->ac97->bus->ops->write(ucb->ac97, reg, val);
+}
+
+static inline void ucb1400_adc_enable(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
+}
+
+static unsigned int ucb1400_adc_read(struct ucb1400 *ucb, u16 adc_channel)
+{
+ unsigned int val;
+
+ if (ucb->adcsync)
+ adc_channel |= UCB_ADC_SYNC_ENA;
+
+ ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
+ ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel | UCB_ADC_START);
+
+ for (;;) {
+ val = ucb1400_reg_read(ucb, UCB_ADC_DATA);
+ if (val & UCB_ADC_DAT_VALID)
+ break;
+ /* yield to other processes */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+
+ return UCB_ADC_DAT_VALUE(val);
+}
+
+static inline void ucb1400_adc_disable(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
+}
+
+/* Switch to interrupt mode. */
+static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
+ UCB_TS_CR_MODE_INT);
+}
+
+/*
+ * Switch to pressure mode, and read pressure. We don't need to wait
+ * here, since both plates are being driven.
+ */
+static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+}
+
+/*
+ * Switch to X position mode and measure Y plate. We switch the plate
+ * configuration in pressure mode, then switch to position mode. This
+ * gives a faster response time. Even so, we need to wait about 55us
+ * for things to stabilise.
+ */
+static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
+
+ udelay(55);
+
+ return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+}
+
+/*
+ * Switch to Y position mode and measure X plate. We switch the plate
+ * configuration in pressure mode, then switch to position mode. This
+ * gives a faster response time. Even so, we need to wait about 55us
+ * for things to stabilise.
+ */
+static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
+
+ udelay(55);
+
+ return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPX);
+}
+
+/*
+ * Switch to X plate resistance mode. Set MX to ground, PX to
+ * supply. Measure current.
+ */
+static inline unsigned int ucb1400_ts_read_xres(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ return ucb1400_adc_read(ucb, 0);
+}
+
+/*
+ * Switch to Y plate resistance mode. Set MY to ground, PY to
+ * supply. Measure current.
+ */
+static inline unsigned int ucb1400_ts_read_yres(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ return ucb1400_adc_read(ucb, 0);
+}
+
+static inline int ucb1400_ts_pen_down(struct ucb1400 *ucb)
+{
+ unsigned short val = ucb1400_reg_read(ucb, UCB_TS_CR);
+ return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
+}
+
+static inline void ucb1400_ts_irq_enable(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_IE_CLEAR, UCB_IE_TSPX);
+ ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+ ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_TSPX);
+}
+
+static inline void ucb1400_ts_irq_disable(struct ucb1400 *ucb)
+{
+ ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
+}
+
+static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
+{
+ input_report_abs(idev, ABS_X, x);
+ input_report_abs(idev, ABS_Y, y);
+ input_report_abs(idev, ABS_PRESSURE, pressure);
+ input_sync(idev);
+}
+
+static void ucb1400_ts_event_release(struct input_dev *idev)
+{
+ input_report_abs(idev, ABS_PRESSURE, 0);
+ input_sync(idev);
+}
+
+static void ucb1400_handle_pending_irq(struct ucb1400 *ucb)
+{
+ unsigned int isr;
+
+ isr = ucb1400_reg_read(ucb, UCB_IE_STATUS);
+ ucb1400_reg_write(ucb, UCB_IE_CLEAR, isr);
+ ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+
+ if (isr & UCB_IE_TSPX)
+ ucb1400_ts_irq_disable(ucb);
+ else
+ printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
+
+ enable_irq(ucb->irq);
+}
+
+static int ucb1400_ts_thread(void *_ucb)
+{
+ struct ucb1400 *ucb = _ucb;
+ struct task_struct *tsk = current;
+ int valid = 0;
+
+ tsk->policy = SCHED_FIFO;
+ tsk->rt_priority = 1;
+
+ while (!kthread_should_stop()) {
+ unsigned int x, y, p;
+ long timeout;
+
+ ucb->ts_restart = 0;
+
+ if (ucb->irq_pending) {
+ ucb->irq_pending = 0;
+ ucb1400_handle_pending_irq(ucb);
+ }
+
+ ucb1400_adc_enable(ucb);
+ x = ucb1400_ts_read_xpos(ucb);
+ y = ucb1400_ts_read_ypos(ucb);
+ p = ucb1400_ts_read_pressure(ucb);
+ ucb1400_adc_disable(ucb);
+
+ /* Switch back to interrupt mode. */
+ ucb1400_ts_mode_int(ucb);
+
+ msleep(10);
+
+ if (ucb1400_ts_pen_down(ucb)) {
+ ucb1400_ts_irq_enable(ucb);
+
+ /*
+ * If we spat out a valid sample set last time,
+ * spit out a "pen off" sample here.
+ */
+ if (valid) {
+ ucb1400_ts_event_release(ucb->ts_idev);
+ valid = 0;
+ }
+
+ timeout = MAX_SCHEDULE_TIMEOUT;
+ } else {
+ valid = 1;
+ ucb1400_ts_evt_add(ucb->ts_idev, p, x, y);
+ timeout = msecs_to_jiffies(10);
+ }
+
+ wait_event_interruptible_timeout(ucb->ts_wait,
+ ucb->irq_pending || ucb->ts_restart || kthread_should_stop(),
+ timeout);
+ try_to_freeze();
+ }
+
+ /* Send the "pen off" if we are stopping with the pen still active */
+ if (valid)
+ ucb1400_ts_event_release(ucb->ts_idev);
+
+ ucb->ts_task = NULL;
+ return 0;
+}
+
+/*
+ * A restriction with interrupts exists when using the ucb1400, as
+ * the codec read/write routines may sleep while waiting for codec
+ * access completion and uses semaphores for access control to the
+ * AC97 bus. A complete codec read cycle could take anywhere from
+ * 60 to 100uSec so we *definitely* don't want to spin inside the
+ * interrupt handler waiting for codec access. So, we handle the
+ * interrupt by scheduling a RT kernel thread to run in process
+ * context instead of interrupt context.
+ */
+static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
+{
+ struct ucb1400 *ucb = devid;
+
+ if (irqnr == ucb->irq) {
+ disable_irq(ucb->irq);
+ ucb->irq_pending = 1;
+ wake_up(&ucb->ts_wait);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static int ucb1400_ts_open(struct input_dev *idev)
+{
+ struct ucb1400 *ucb = idev->private;
+ int ret = 0;
+
+ BUG_ON(ucb->ts_task);
+
+ ucb->ts_task = kthread_run(ucb1400_ts_thread, ucb, "UCB1400_ts");
+ if (IS_ERR(ucb->ts_task)) {
+ ret = PTR_ERR(ucb->ts_task);
+ ucb->ts_task = NULL;
+ }
+
+ return ret;
+}
+
+static void ucb1400_ts_close(struct input_dev *idev)
+{
+ struct ucb1400 *ucb = idev->private;
+
+ if (ucb->ts_task)
+ kthread_stop(ucb->ts_task);
+
+ ucb1400_ts_irq_disable(ucb);
+ ucb1400_reg_write(ucb, UCB_TS_CR, 0);
+}
+
+#ifdef CONFIG_PM
+static int ucb1400_ts_resume(struct device *dev)
+{
+ struct ucb1400 *ucb = dev_get_drvdata(dev);
+
+ if (ucb->ts_task) {
+ /*
+ * Restart the TS thread to ensure the
+ * TS interrupt mode is set up again
+ * after sleep.
+ */
+ ucb->ts_restart = 1;
+ wake_up(&ucb->ts_wait);
+ }
+ return 0;
+}
+#else
+#define ucb1400_ts_resume NULL
+#endif
+
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
+/*
+ * Try to probe our interrupt, rather than relying on lots of
+ * hard-coded machine dependencies.
+ */
+static int ucb1400_detect_irq(struct ucb1400 *ucb)
+{
+ unsigned long mask, timeout;
+
+ mask = probe_irq_on();
+ if (!mask) {
+ probe_irq_off(mask);
+ return -EBUSY;
+ }
+
+ /* Enable the ADC interrupt. */
+ ucb1400_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
+ ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
+ ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
+ ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+
+ /* Cause an ADC interrupt. */
+ ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
+ ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
+
+ /* Wait for the conversion to complete. */
+ timeout = jiffies + HZ/2;
+ while (!(ucb1400_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VALID)) {
+ cpu_relax();
+ if (time_after(jiffies, timeout)) {
+ printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
+ probe_irq_off(mask);
+ return -ENODEV;
+ }
+ }
+ ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
+
+ /* Disable and clear interrupt. */
+ ucb1400_reg_write(ucb, UCB_IE_RIS, 0);
+ ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
+ ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
+ ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+
+ /* Read triggered interrupt. */
+ ucb->irq = probe_irq_off(mask);
+ if (ucb->irq < 0 || ucb->irq == NO_IRQ)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int ucb1400_ts_probe(struct device *dev)
+{
+ struct ucb1400 *ucb;
+ struct input_dev *idev;
+ int error, id, x_res, y_res;
+
+ ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
+ idev = input_allocate_device();
+ if (!ucb || !idev) {
+ error = -ENOMEM;
+ goto err_free_devs;
+ }
+
+ ucb->ts_idev = idev;
+ ucb->adcsync = adcsync;
+ ucb->ac97 = to_ac97_t(dev);
+ init_waitqueue_head(&ucb->ts_wait);
+
+ id = ucb1400_reg_read(ucb, UCB_ID);
+ if (id != UCB_ID_1400) {
+ error = -ENODEV;
+ goto err_free_devs;
+ }
+
+ error = ucb1400_detect_irq(ucb);
+ if (error) {
+ printk(KERN_ERR "UCB1400: IRQ probe failed\n");
+ goto err_free_devs;
+ }
+
+ error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
+ "UCB1400", ucb);
+ if (error) {
+ printk(KERN_ERR "ucb1400: unable to grab irq%d: %d\n",
+ ucb->irq, error);
+ goto err_free_devs;
+ }
+ printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
+
+ idev->private = ucb;
+ idev->cdev.dev = dev;
+ idev->name = "UCB1400 touchscreen interface";
+ idev->id.vendor = ucb1400_reg_read(ucb, AC97_VENDOR_ID1);
+ idev->id.product = id;
+ idev->open = ucb1400_ts_open;
+ idev->close = ucb1400_ts_close;
+ idev->evbit[0] = BIT(EV_ABS);
+
+ ucb1400_adc_enable(ucb);
+ x_res = ucb1400_ts_read_xres(ucb);
+ y_res = ucb1400_ts_read_yres(ucb);
+ ucb1400_adc_disable(ucb);
+ printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
+
+ input_set_abs_params(idev, ABS_X, 0, x_res, 0, 0);
+ input_set_abs_params(idev, ABS_Y, 0, y_res, 0, 0);
+ input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
+
+ error = input_register_device(idev);
+ if (error)
+ goto err_free_irq;
+
+ dev_set_drvdata(dev, ucb);
+ return 0;
+
+ err_free_irq:
+ free_irq(ucb->irq, ucb);
+ err_free_devs:
+ input_free_device(idev);
+ kfree(ucb);
+ return error;
+}
+
+static int ucb1400_ts_remove(struct device *dev)
+{
+ struct ucb1400 *ucb = dev_get_drvdata(dev);
+
+ free_irq(ucb->irq, ucb);
+ input_unregister_device(ucb->ts_idev);
+ dev_set_drvdata(dev, NULL);
+ kfree(ucb);
+ return 0;
+}
+
+static struct device_driver ucb1400_ts_driver = {
+ .owner = THIS_MODULE,
+ .bus = &ac97_bus_type,
+ .probe = ucb1400_ts_probe,
+ .remove = ucb1400_ts_remove,
+ .resume = ucb1400_ts_resume,
+};
+
+static int __init ucb1400_ts_init(void)
+{
+ return driver_register(&ucb1400_ts_driver);
+}
+
+static void __exit ucb1400_ts_exit(void)
+{
+ driver_unregister(&ucb1400_ts_driver);
+}
+
+module_param(adcsync, int, 0444);
+
+module_init(ucb1400_ts_init);
+module_exit(ucb1400_ts_exit);
+
+MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver");
+MODULE_LICENSE("GPL");
p = cblock.buffer;
if (!access_ok(VERIFY_READ, p, length))
return -EFAULT;
- buf = (u_char *) kmalloc(1024, GFP_KERNEL);
+ buf = kmalloc(1024, GFP_KERNEL);
if (!buf)
return -ENOMEM;
timeout = 0;
{
int i;
act2000_card *card;
- if (!(card = (act2000_card *) kmalloc(sizeof(act2000_card), GFP_KERNEL))) {
+ if (!(card = kzalloc(sizeof(act2000_card), GFP_KERNEL))) {
printk(KERN_WARNING
"act2000: (%s) Could not allocate card-struct.\n", id);
return;
}
- memset((char *) card, 0, sizeof(act2000_card));
spin_lock_init(&card->lock);
spin_lock_init(&card->mnlock);
skb_queue_head_init(&card->sndq);
unsigned int minor = 0;
unsigned long flags;
- mp = kmalloc(sizeof(*mp), GFP_ATOMIC);
+ mp = kzalloc(sizeof(*mp), GFP_ATOMIC);
if (!mp) {
printk(KERN_ERR "capi: can't alloc capiminor\n");
return NULL;
}
- memset(mp, 0, sizeof(struct capiminor));
mp->ap = ap;
mp->ncci = ncci;
mp->msgid = 0;
struct capiminor *mp = NULL;
#endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */
- np = kmalloc(sizeof(*np), GFP_ATOMIC);
+ np = kzalloc(sizeof(*np), GFP_ATOMIC);
if (!np)
return NULL;
- memset(np, 0, sizeof(struct capincci));
np->ncci = ncci;
np->cdev = cdev;
#ifdef CONFIG_ISDN_CAPI_MIDDLEWARE
struct capidev *cdev;
unsigned long flags;
- cdev = kmalloc(sizeof(*cdev), GFP_KERNEL);
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
if (!cdev)
return NULL;
- memset(cdev, 0, sizeof(struct capidev));
init_MUTEX(&cdev->ncci_list_sem);
skb_queue_head_init(&cdev->recvqueue);
{
struct capiminor *mp;
- if ((mp = capiminor_find(iminor(file->f_dentry->d_inode))) == 0)
+ if ((mp = capiminor_find(iminor(file->f_path.dentry->d_inode))) == 0)
return -ENXIO;
if (mp->nccip == 0)
return -ENXIO;
return error;
}
-static void capinc_tty_set_termios(struct tty_struct *tty, struct termios * old)
+static void capinc_tty_set_termios(struct tty_struct *tty, struct ktermios * old)
{
#ifdef _DEBUG_TTYFUNCS
printk(KERN_DEBUG "capinc_tty_set_termios\n");
{
capidrv_plci *plcip;
- plcip = (capidrv_plci *) kmalloc(sizeof(capidrv_plci), GFP_ATOMIC);
+ plcip = kzalloc(sizeof(capidrv_plci), GFP_ATOMIC);
if (plcip == 0)
return NULL;
- memset(plcip, 0, sizeof(capidrv_plci));
plcip->state = ST_PLCI_NONE;
plcip->plci = 0;
plcip->msgid = 0;
{
capidrv_ncci *nccip;
- nccip = (capidrv_ncci *) kmalloc(sizeof(capidrv_ncci), GFP_ATOMIC);
+ nccip = kzalloc(sizeof(capidrv_ncci), GFP_ATOMIC);
if (nccip == 0)
return NULL;
- memset(nccip, 0, sizeof(capidrv_ncci));
nccip->ncci = ncci;
nccip->state = ST_NCCI_NONE;
nccip->plcip = plcip;
printk(KERN_WARNING "capidrv: (%s) Could not reserve module\n", id);
return -1;
}
- if (!(card = (capidrv_contr *) kmalloc(sizeof(capidrv_contr), GFP_ATOMIC))) {
+ if (!(card = kzalloc(sizeof(capidrv_contr), GFP_ATOMIC))) {
printk(KERN_WARNING
"capidrv: (%s) Could not allocate contr-struct.\n", id);
return -1;
}
- memset(card, 0, sizeof(capidrv_contr));
card->owner = THIS_MODULE;
init_timer(&card->listentimer);
strcpy(card->name, id);
card->contrnr = contr;
card->nbchan = profp->nbchannel;
- card->bchans = (capidrv_bchan *) kmalloc(sizeof(capidrv_bchan) * card->nbchan, GFP_ATOMIC);
+ card->bchans = kmalloc(sizeof(capidrv_bchan) * card->nbchan, GFP_ATOMIC);
if (!card->bchans) {
printk(KERN_WARNING
"capidrv: (%s) Could not allocate bchan-structs.\n", id);
return;
if (!*cp)
return;
- if (!(ib = (struct divert_info *) kmalloc(sizeof(struct divert_info) + strlen(cp), GFP_ATOMIC)))
+ if (!(ib = kmalloc(sizeof(struct divert_info) + strlen(cp), GFP_ATOMIC)))
return; /* no memory */
strcpy(ib->info_start, cp); /* set output string */
ib->next = NULL;
*ielenp = p - ielenp - 1; /* set total IE length */
/* allocate mem for information struct */
- if (!(cs = (struct call_struc *) kmalloc(sizeof(struct call_struc), GFP_ATOMIC)))
+ if (!(cs = kmalloc(sizeof(struct call_struc), GFP_ATOMIC)))
return(-ENOMEM); /* no memory */
init_timer(&cs->timer);
cs->info[0] = '\0';
{ struct deflect_struc *ds,*ds1=NULL;
unsigned long flags;
- if (!(ds = (struct deflect_struc *) kmalloc(sizeof(struct deflect_struc),
+ if (!(ds = kmalloc(sizeof(struct deflect_struc),
GFP_KERNEL)))
return(-ENOMEM); /* no memory */
if (dv->rule.action == DEFLECT_PROCEED)
if ((!if_used) || ((!extern_wait_max) && (!dv->rule.waittime)))
return(0); /* no external deflection needed */
- if (!(cs = (struct call_struc *) kmalloc(sizeof(struct call_struc), GFP_ATOMIC)))
+ if (!(cs = kmalloc(sizeof(struct call_struc), GFP_ATOMIC)))
return(0); /* no memory */
init_timer(&cs->timer);
cs->info[0] = '\0';
tristate "Siemens Gigaset support (isdn)"
depends on ISDN_I4L
select CRC_CCITT
+ select BITREVERSE
help
Say m here if you have a Gigaset or Sinus isdn device.
#include "gigaset.h"
#include <linux/crc-ccitt.h>
+#include <linux/bitrev.h>
//#define GIG_M10x_STUFF_VOICE_DATA
inputstate |= INS_skip_frame;
break;
}
- *__skb_put(skb, 1) = gigaset_invtab[c];
+ *__skb_put(skb, 1) = bitrev8(c);
}
if (unlikely(!numbytes))
cp = skb->data;
len = skb->len;
while (len--) {
- c = gigaset_invtab[*cp++];
+ c = bitrev8(*cp++);
if (c == DLE_FLAG)
*(skb_put(iraw_skb, 1)) = c;
*(skb_put(iraw_skb, 1)) = c;
{
struct cmdbuf_t *cb;
unsigned long flags;
- int status;
+ int rc;
gigaset_dbg_buffer(atomic_read(&cs->mstate) != MS_LOCKED ?
DEBUG_TRANSCMD : DEBUG_LOCKCMD,
"CMD Transmit", len, buf);
- if (len <= 0)
- return 0; /* nothing to do */
+ if (len <= 0) {
+ /* nothing to do */
+ rc = 0;
+ goto notqueued;
+ }
if (len > IF_WRITEBUF)
len = IF_WRITEBUF;
if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
dev_err(cs->dev, "%s: out of memory\n", __func__);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto notqueued;
}
memcpy(cb->buf, buf, len);
if (unlikely(!cs->connected)) {
spin_unlock_irqrestore(&cs->lock, flags);
gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+ /* flush command queue */
+ spin_lock_irqsave(&cs->cmdlock, flags);
+ while (cs->cmdbuf != NULL)
+ complete_cb(cs);
+ spin_unlock_irqrestore(&cs->cmdlock, flags);
return -ENODEV;
}
- status = start_cbsend(cs);
+ rc = start_cbsend(cs);
spin_unlock_irqrestore(&cs->lock, flags);
- return status < 0 ? status : len;
+ return rc < 0 ? rc : len;
+
+notqueued: /* request handled without queuing */
+ if (wake_tasklet)
+ tasklet_schedule(wake_tasklet);
+ return rc;
}
/* gigaset_write_room
/* kill URBs and tasklets before freeing - better safe than sorry */
atomic_set(&ubc->running, 0);
- for (i = 0; i < BAS_OUTURBS; ++i)
- if (ubc->isoouturbs[i].urb) {
- gig_dbg(DEBUG_INIT, "%s: killing iso out URB %d",
- __func__, i);
- usb_kill_urb(ubc->isoouturbs[i].urb);
- usb_free_urb(ubc->isoouturbs[i].urb);
- }
- for (i = 0; i < BAS_INURBS; ++i)
- if (ubc->isoinurbs[i]) {
- gig_dbg(DEBUG_INIT, "%s: killing iso in URB %d",
- __func__, i);
- usb_kill_urb(ubc->isoinurbs[i]);
- usb_free_urb(ubc->isoinurbs[i]);
- }
+ gig_dbg(DEBUG_INIT, "%s: killing iso URBs", __func__);
+ for (i = 0; i < BAS_OUTURBS; ++i) {
+ usb_kill_urb(ubc->isoouturbs[i].urb);
+ usb_free_urb(ubc->isoouturbs[i].urb);
+ }
+ for (i = 0; i < BAS_INURBS; ++i) {
+ usb_kill_urb(ubc->isoinurbs[i]);
+ usb_free_urb(ubc->isoinurbs[i]);
+ }
tasklet_kill(&ubc->sent_tasklet);
tasklet_kill(&ubc->rcvd_tasklet);
kfree(ubc->isooutbuf);
struct bas_bc_state *ubc;
int i, j;
+ gig_dbg(DEBUG_INIT, "%s: killing URBs", __func__);
for (j = 0; j < 2; ++j) {
ubc = cs->bcs[j].hw.bas;
- for (i = 0; i < BAS_OUTURBS; ++i)
- if (ubc->isoouturbs[i].urb) {
- usb_kill_urb(ubc->isoouturbs[i].urb);
- gig_dbg(DEBUG_INIT,
- "%s: isoc output URB %d/%d unlinked",
- __func__, j, i);
- usb_free_urb(ubc->isoouturbs[i].urb);
- ubc->isoouturbs[i].urb = NULL;
- }
- for (i = 0; i < BAS_INURBS; ++i)
- if (ubc->isoinurbs[i]) {
- usb_kill_urb(ubc->isoinurbs[i]);
- gig_dbg(DEBUG_INIT,
- "%s: isoc input URB %d/%d unlinked",
- __func__, j, i);
- usb_free_urb(ubc->isoinurbs[i]);
- ubc->isoinurbs[i] = NULL;
- }
- }
- if (ucs->urb_int_in) {
- usb_kill_urb(ucs->urb_int_in);
- gig_dbg(DEBUG_INIT, "%s: interrupt input URB unlinked",
- __func__);
- usb_free_urb(ucs->urb_int_in);
- ucs->urb_int_in = NULL;
- }
- if (ucs->urb_cmd_out) {
- usb_kill_urb(ucs->urb_cmd_out);
- gig_dbg(DEBUG_INIT, "%s: command output URB unlinked",
- __func__);
- usb_free_urb(ucs->urb_cmd_out);
- ucs->urb_cmd_out = NULL;
- }
- if (ucs->urb_cmd_in) {
- usb_kill_urb(ucs->urb_cmd_in);
- gig_dbg(DEBUG_INIT, "%s: command input URB unlinked",
- __func__);
- usb_free_urb(ucs->urb_cmd_in);
- ucs->urb_cmd_in = NULL;
- }
- if (ucs->urb_ctrl) {
- usb_kill_urb(ucs->urb_ctrl);
- gig_dbg(DEBUG_INIT, "%s: control output URB unlinked",
- __func__);
- usb_free_urb(ucs->urb_ctrl);
- ucs->urb_ctrl = NULL;
+ for (i = 0; i < BAS_OUTURBS; ++i) {
+ usb_kill_urb(ubc->isoouturbs[i].urb);
+ usb_free_urb(ubc->isoouturbs[i].urb);
+ ubc->isoouturbs[i].urb = NULL;
+ }
+ for (i = 0; i < BAS_INURBS; ++i) {
+ usb_kill_urb(ubc->isoinurbs[i]);
+ usb_free_urb(ubc->isoinurbs[i]);
+ ubc->isoinurbs[i] = NULL;
+ }
}
+ usb_kill_urb(ucs->urb_int_in);
+ usb_free_urb(ucs->urb_int_in);
+ ucs->urb_int_in = NULL;
+ usb_kill_urb(ucs->urb_cmd_out);
+ usb_free_urb(ucs->urb_cmd_out);
+ ucs->urb_cmd_out = NULL;
+ usb_kill_urb(ucs->urb_cmd_in);
+ usb_free_urb(ucs->urb_cmd_in);
+ ucs->urb_cmd_in = NULL;
+ usb_kill_urb(ucs->urb_ctrl);
+ usb_free_urb(ucs->urb_ctrl);
+ ucs->urb_ctrl = NULL;
}
/* gigaset_probe
#define VALID_ID 0x02
#define ASSIGNED 0x04
-/* bitwise byte inversion table */
-__u8 gigaset_invtab[256] = {
- 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
- 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
- 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
- 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
- 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
- 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
- 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
- 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
- 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
- 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
- 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
- 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
- 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
- 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
- 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
- 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
- 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
- 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
- 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
- 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
- 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
- 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
- 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
- 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
- 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
- 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
- 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
- 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
- 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
- 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
- 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
- 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff
-};
-EXPORT_SYMBOL_GPL(gigaset_invtab);
-
void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
size_t len, const unsigned char *buf)
{
}
}
-
-/* bitwise byte inversion table */
-extern __u8 gigaset_invtab[]; /* in common.c */
-
/* append received bytes to inbuf */
int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
unsigned numbytes);
static int if_chars_in_buffer(struct tty_struct *tty);
static void if_throttle(struct tty_struct *tty);
static void if_unthrottle(struct tty_struct *tty);
-static void if_set_termios(struct tty_struct *tty, struct termios *old);
+static void if_set_termios(struct tty_struct *tty, struct ktermios *old);
static int if_tiocmget(struct tty_struct *tty, struct file *file);
static int if_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
mutex_unlock(&cs->mutex);
}
-static void if_set_termios(struct tty_struct *tty, struct termios *old)
+static void if_set_termios(struct tty_struct *tty, struct ktermios *old)
{
struct cardstate *cs;
unsigned int iflag;
#include "gigaset.h"
#include <linux/crc-ccitt.h>
+#include <linux/bitrev.h>
/* access methods for isowbuf_t */
/* ============================ */
gig_dbg(DEBUG_STREAM, "put %d bytes", count);
write = atomic_read(&iwb->write);
do {
- c = gigaset_invtab[*in++];
+ c = bitrev8(*in++);
iwb->data[write++] = c;
write %= BAS_OUTBUFSIZE;
} while (--count > 0);
while (count > 0) {
dst = skb_put(skb, count < dobytes ? count : dobytes);
while (count > 0 && dobytes > 0) {
- *dst++ = gigaset_invtab[*src++];
+ *dst++ = bitrev8(*src++);
count--;
dobytes--;
}
p_dev->conf.Present = PRESENT_OPTION;
/* Allocate space for private device-specific data */
- local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+ local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local)
goto err;
- memset(local, 0, sizeof(local_info_t));
p_dev->priv = local;
return avmcs_config(p_dev);
avmctrl_info *cinfo;
int i;
- card = kmalloc(sizeof(*card), GFP_KERNEL);
+ card = kzalloc(sizeof(*card), GFP_KERNEL);
if (!card)
return NULL;
- memset(card, 0, sizeof(*card));
-
- cinfo = kmalloc(sizeof(*cinfo) * nr_controllers, GFP_KERNEL);
+ cinfo = kzalloc(sizeof(*cinfo) * nr_controllers, GFP_KERNEL);
if (!cinfo) {
kfree(card);
return NULL;
}
- memset(cinfo, 0, sizeof(*cinfo) * nr_controllers);
card->ctrlinfo = cinfo;
for (i = 0; i < nr_controllers; i++) {
avmcard_dmainfo *p;
void *buf;
- p = kmalloc(sizeof(avmcard_dmainfo), GFP_KERNEL);
+ p = kzalloc(sizeof(avmcard_dmainfo), GFP_KERNEL);
if (!p) {
printk(KERN_WARNING "%s: no memory.\n", name);
goto err;
}
- memset(p, 0, sizeof(avmcard_dmainfo));
p->recvbuf.size = rsize;
buf = pci_alloc_consistent(pdev, rsize, &p->recvbuf.dmaaddr);
{
int i;
+ unregister_capi_driver(&capi_driver_t1isa);
for (i = 0; i < MAX_CARDS; i++) {
if (!io[i])
break;
data_length -= 9;
- if ((to_copy = MIN(strlen(clients[id].drvName), data_length-1))) {
+ if ((to_copy = min(strlen(clients[id].drvName), (size_t)(data_length-1)))) {
memcpy (p, clients[id].drvName, to_copy);
p += to_copy;
data_length -= to_copy;
if ((data_length >= 4) && clients[id].hDbg->drvTag[0]) {
*p++ = '(';
data_length -= 1;
- if ((to_copy = MIN(strlen(clients[id].hDbg->drvTag), data_length-2))) {
+ if ((to_copy = min(strlen(clients[id].hDbg->drvTag), (size_t)(data_length-2)))) {
memcpy (p, clients[id].hDbg->drvTag, to_copy);
p += to_copy;
data_length -= to_copy;
i = this->XCurrent;
X = PTR_X(a,this);
while(i<this->XNum && length<270) {
- clength = MIN((word)(270-length),X[i].PLength-this->XOffset);
+ clength = min((word)(270-length),(word)(X[i].PLength-this->XOffset));
a->ram_out_buffer(a,
&ReqOut->XBuffer.P[length],
PTR_P(a,this,&X[i].P[this->XOffset]),
sizeof(a->stream_buffer),
&final, NULL, NULL);
}
- IoAdapter->RBuffer.length = MIN(MLength, 270);
+ IoAdapter->RBuffer.length = min(MLength, (word)270);
if (IoAdapter->RBuffer.length != MLength) {
this->complete = 0;
} else {
this->RCurrent++;
}
if (cma) {
- clength = MIN(MLength, R[this->RCurrent].PLength-this->ROffset);
+ clength = min(MLength, (word)(R[this->RCurrent].PLength-this->ROffset));
} else {
- clength = MIN(a->ram_inw(a, &RBuffer->length)-offset,
+ clength = min(a->ram_inw(a, &RBuffer->length)-offset,
R[this->RCurrent].PLength-this->ROffset);
}
if(R[this->RCurrent].P) {
unsigned char line[160];
va_start(args, format);
- vsprintf(line, format, args);
+ vsnprintf(line, sizeof(line), format, args);
va_end(args);
printk(KERN_INFO "%s: %s\n", DRIVERLNAME, line);
case IDI_SYNC_REQ_XDI_GET_CAPI_PARAMS: {
diva_xdi_get_capi_parameters_t prms, *pI = &syncReq->xdi_capi_prms.info;
memset (&prms, 0x00, sizeof(prms));
- prms.structure_length = MIN(sizeof(prms), pI->structure_length);
+ prms.structure_length = min_t(size_t, sizeof(prms), pI->structure_length);
memset (pI, 0x00, pI->structure_length);
prms.flag_dynamic_l1_down = (IoAdapter->capi_cfg.cfg_1 & \
DIVA_XDI_CAPI_CFG_1_DYNAMIC_L1_ON) ? 1 : 0;
return (-1); /* was not able to write */
break; /* only part of message was written */
}
- to_write = MIN(length, DIVA_DFIFO_DATA_SZ);
+ to_write = min(length, DIVA_DFIFO_DATA_SZ);
if (to_write) {
a->ram_out_buffer (a,
#ifdef PLATFORM_GT_32BIT
return (-1); /* was not able to read */
break;
}
- to_read = MIN(max_length, tmp[1]);
+ to_read = min(max_length, (int)tmp[1]);
if (to_read) {
a->ram_in_buffer(a,
#ifdef PLATFORM_GT_32BIT
#define NULL ((void *) 0)
#endif
-#ifndef MIN
-#define MIN(a,b) ((a)>(b) ? (b) : (a))
-#endif
-
-#ifndef MAX
-#define MAX(a,b) ((a)>(b) ? (a) : (b))
-#endif
-
#ifndef far
#define far
#endif
config HISAX_TELESPCI
bool "Teles PCI"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || FRV))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the Teles PCI.
See <file:Documentation/isdn/README.HiSax> on how to configure it.
config HISAX_NETJET
bool "NETjet card"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || FRV))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the NetJet from Traverse
Technologies.
config HISAX_NETJET_U
bool "NETspider U card"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || FRV))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the Netspider U interface ISDN card
from Traverse Technologies.
config HISAX_HFC_PCI
bool "HFC PCI-Bus cards"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || FRV))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
config HISAX_ENTERNOW_PCI
bool "Formula-n enter:now PCI card"
- depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || FRV))
+ depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
help
This enables HiSax support for the Formula-n enter:now PCI
ISDN card.
-config HISAX_AMD7930
- bool "Am7930 (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SPARC && BROKEN
- help
- This enables HiSax support for the AMD7930 chips on some SPARCs.
- This code is not finished yet.
-
endif
if ISDN_DRV_HISAX
tristate "ST5481 USB ISDN modem (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
select CRC_CCITT
+ select BITREVERSE
help
This enables the driver for ST5481 based USB ISDN adapters,
e.g. the BeWan Gazel 128 USB
DEBUG(0, "avma1cs_attach()\n");
/* Allocate space for private device-specific data */
- local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+ local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local)
return -ENOMEM;
- memset(local, 0, sizeof(local_info_t));
p_dev->priv = local;
/* The io structure describes IO port mapping */
#define DEFAULT_CFG {5,0x2E0,0,0}
#endif
-
-#ifdef CONFIG_HISAX_AMD7930
-#undef DEFAULT_CARD
-#undef DEFAULT_CFG
-#define DEFAULT_CARD ISDN_CTYPE_AMD7930
-#define DEFAULT_CFG {12,0x3e0,0,0}
-#endif
-
#ifdef CONFIG_HISAX_NICCY
#undef DEFAULT_CARD
#undef DEFAULT_CFG
extern int setup_hfcsx(struct IsdnCard *card);
#endif
-#if CARD_AMD7930
-extern int setup_amd7930(struct IsdnCard *card);
-#endif
-
#if CARD_NICCY
extern int setup_niccy(struct IsdnCard *card);
#endif
struct IsdnCard *card = cards + cardnr;
struct IsdnCardState *cs;
- cs = kmalloc(sizeof(struct IsdnCardState), GFP_ATOMIC);
+ cs = kzalloc(sizeof(struct IsdnCardState), GFP_ATOMIC);
if (!cs) {
printk(KERN_WARNING
"HiSax: No memory for IsdnCardState(card %d)\n",
cardnr + 1);
goto out;
}
- memset(cs, 0, sizeof(struct IsdnCardState));
card->cs = cs;
spin_lock_init(&cs->statlock);
spin_lock_init(&cs->lock);
ret = setup_niccy(card);
break;
#endif
-#if CARD_AMD7930
- case ISDN_CTYPE_AMD7930:
- ret = setup_amd7930(card);
- break;
-#endif
#if CARD_ISURF
case ISDN_CTYPE_ISURF:
ret = setup_isurf(card);
break;
case ISDN_CTYPE_ELSA_PCI:
case ISDN_CTYPE_NETJET_S:
- case ISDN_CTYPE_AMD7930:
case ISDN_CTYPE_TELESPCI:
case ISDN_CTYPE_W6692:
case ISDN_CTYPE_NETJET_U:
bytecnt = 32;
}
}
+
+#ifdef __ISAPNP__
ready:
+#endif
+
printk(KERN_INFO
"Diva: %s card configured at %#lx IRQ %d\n",
(cs->subtyp == DIVA_PCI) ? "PCI" :
DEBUG(0, "elsa_cs_attach()\n");
/* Allocate space for private device-specific data */
- local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+ local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) return -ENOMEM;
- memset(local, 0, sizeof(local_info_t));
local->p_dev = link;
link->priv = local;
int i;
fsm->jumpmatrix = (FSMFNPTR *)
- kmalloc(sizeof (FSMFNPTR) * fsm->state_count * fsm->event_count, GFP_KERNEL);
+ kzalloc(sizeof (FSMFNPTR) * fsm->state_count * fsm->event_count, GFP_KERNEL);
if (!fsm->jumpmatrix)
return -ENOMEM;
- memset(fsm->jumpmatrix, 0, sizeof (FSMFNPTR) * fsm->state_count * fsm->event_count);
-
for (i = 0; i < fncount; i++)
if ((fnlist[i].state>=fsm->state_count) || (fnlist[i].event>=fsm->event_count)) {
printk(KERN_ERR "FsmNew Error line %d st(%ld/%ld) ev(%ld/%ld)\n",
hfc4s8s_param *driver_data = (hfc4s8s_param *) ent->driver_data;
hfc4s8s_hw *hw;
- if (!(hw = kmalloc(sizeof(hfc4s8s_hw), GFP_ATOMIC))) {
+ if (!(hw = kzalloc(sizeof(hfc4s8s_hw), GFP_ATOMIC))) {
printk(KERN_ERR "No kmem for HFC-4S/8S card\n");
return (err);
}
- memset(hw, 0, sizeof(hfc4s8s_hw));
hw->pdev = pdev;
err = pci_enable_device(pdev);
break;
case (HW_TESTLOOP | REQUEST):
spin_lock_irqsave(&cs->lock, flags);
- switch ((int) arg) {
+ switch ((long) arg) {
case (1):
Write_hfc(cs, HFCPCI_B1_SSL, 0x80); /* tx slot */
Write_hfc(cs, HFCPCI_B1_RSL, 0x80); /* rx slot */
default:
spin_unlock_irqrestore(&cs->lock, flags);
if (cs->debug & L1_DEB_WARN)
- debugl1(cs, "hfcpci_l1hw loop invalid %4x", (int) arg);
+ debugl1(cs, "hfcpci_l1hw loop invalid %4lx", (long) arg);
return;
}
cs->hw.hfcpci.trm |= 0x80; /* enable IOM-loop */
pci_write_config_dword(cs->hw.hfcpci.dev, 0x80, (u_int) virt_to_bus(cs->hw.hfcpci.fifos));
cs->hw.hfcpci.pci_io = ioremap((ulong) cs->hw.hfcpci.pci_io, 256);
printk(KERN_INFO
- "HFC-PCI: defined at mem %#x fifo %#x(%#x) IRQ %d HZ %d\n",
- (u_int) cs->hw.hfcpci.pci_io,
- (u_int) cs->hw.hfcpci.fifos,
+ "HFC-PCI: defined at mem %p fifo %p(%#x) IRQ %d HZ %d\n",
+ cs->hw.hfcpci.pci_io,
+ cs->hw.hfcpci.fifos,
(u_int) virt_to_bus(cs->hw.hfcpci.fifos),
cs->irq, HZ);
spin_lock_irqsave(&cs->lock, flags);
iface = iface_used;
if (!
(context =
- kmalloc(sizeof(hfcusb_data), GFP_KERNEL)))
+ kzalloc(sizeof(hfcusb_data), GFP_KERNEL)))
return (-ENOMEM); /* got no mem */
- memset(context, 0, sizeof(hfcusb_data));
ep = iface->endpoint;
vcf = validconf[small_match];
#define CARD_HFC_SX 0
#endif
-#ifdef CONFIG_HISAX_AMD7930
-#define CARD_AMD7930 1
-#else
-#define CARD_AMD7930 0
-#endif
-
#ifdef CONFIG_HISAX_NICCY
#define CARD_NICCY 1
#ifndef ISDN_CHIP_ISAC
struct hisax_b_if *b_if[2];
int i;
- adapter = kmalloc(sizeof(struct fritz_adapter), GFP_KERNEL);
+ adapter = kzalloc(sizeof(struct fritz_adapter), GFP_KERNEL);
if (!adapter)
return NULL;
- memset(adapter, 0, sizeof(struct fritz_adapter));
-
adapter->isac.hisax_d_if.owner = THIS_MODULE;
adapter->isac.hisax_d_if.ifc.priv = &adapter->isac;
adapter->isac.hisax_d_if.ifc.l2l1 = isac_d_l2l1;
char buf[256];
va_start(args, fmt);
- vsprintf(buf, fmt, args);
+ vsnprintf(buf, sizeof(buf), fmt, args);
DBG(DBG_L1M, "%s", buf);
va_end(args);
}
/*-------------------------------------------------------------------*/
-/* bit swap table.
- * Very handy for devices with different bit order,
- * and neccessary for each transparent B-channel access for all
- * devices which works with this HDLC decoder without bit reversal.
- */
-const unsigned char isdnhdlc_bit_rev_tab[256] = {
- 0x00,0x80,0x40,0xC0,0x20,0xA0,0x60,0xE0,0x10,0x90,0x50,0xD0,0x30,0xB0,0x70,0xF0,
- 0x08,0x88,0x48,0xC8,0x28,0xA8,0x68,0xE8,0x18,0x98,0x58,0xD8,0x38,0xB8,0x78,0xF8,
- 0x04,0x84,0x44,0xC4,0x24,0xA4,0x64,0xE4,0x14,0x94,0x54,0xD4,0x34,0xB4,0x74,0xF4,
- 0x0C,0x8C,0x4C,0xCC,0x2C,0xAC,0x6C,0xEC,0x1C,0x9C,0x5C,0xDC,0x3C,0xBC,0x7C,0xFC,
- 0x02,0x82,0x42,0xC2,0x22,0xA2,0x62,0xE2,0x12,0x92,0x52,0xD2,0x32,0xB2,0x72,0xF2,
- 0x0A,0x8A,0x4A,0xCA,0x2A,0xAA,0x6A,0xEA,0x1A,0x9A,0x5A,0xDA,0x3A,0xBA,0x7A,0xFA,
- 0x06,0x86,0x46,0xC6,0x26,0xA6,0x66,0xE6,0x16,0x96,0x56,0xD6,0x36,0xB6,0x76,0xF6,
- 0x0E,0x8E,0x4E,0xCE,0x2E,0xAE,0x6E,0xEE,0x1E,0x9E,0x5E,0xDE,0x3E,0xBE,0x7E,0xFE,
- 0x01,0x81,0x41,0xC1,0x21,0xA1,0x61,0xE1,0x11,0x91,0x51,0xD1,0x31,0xB1,0x71,0xF1,
- 0x09,0x89,0x49,0xC9,0x29,0xA9,0x69,0xE9,0x19,0x99,0x59,0xD9,0x39,0xB9,0x79,0xF9,
- 0x05,0x85,0x45,0xC5,0x25,0xA5,0x65,0xE5,0x15,0x95,0x55,0xD5,0x35,0xB5,0x75,0xF5,
- 0x0D,0x8D,0x4D,0xCD,0x2D,0xAD,0x6D,0xED,0x1D,0x9D,0x5D,0xDD,0x3D,0xBD,0x7D,0xFD,
- 0x03,0x83,0x43,0xC3,0x23,0xA3,0x63,0xE3,0x13,0x93,0x53,0xD3,0x33,0xB3,0x73,0xF3,
- 0x0B,0x8B,0x4B,0xCB,0x2B,0xAB,0x6B,0xEB,0x1B,0x9B,0x5B,0xDB,0x3B,0xBB,0x7B,0xFB,
- 0x07,0x87,0x47,0xC7,0x27,0xA7,0x67,0xE7,0x17,0x97,0x57,0xD7,0x37,0xB7,0x77,0xF7,
- 0x0F,0x8F,0x4F,0xCF,0x2F,0xAF,0x6F,0xEF,0x1F,0x9F,0x5F,0xDF,0x3F,0xBF,0x7F,0xFF
-};
-
enum {
HDLC_FAST_IDLE,HDLC_GET_FLAG_B0,HDLC_GETFLAG_B1A6,HDLC_GETFLAG_B7,
HDLC_GET_DATA,HDLC_FAST_FLAG
return len;
}
-EXPORT_SYMBOL(isdnhdlc_bit_rev_tab);
EXPORT_SYMBOL(isdnhdlc_rcv_init);
EXPORT_SYMBOL(isdnhdlc_decode);
EXPORT_SYMBOL(isdnhdlc_out_init);
#define HDLC_CRC_ERROR 2
#define HDLC_LENGTH_ERROR 3
-extern const unsigned char isdnhdlc_bit_rev_tab[256];
-
extern void isdnhdlc_rcv_init (struct isdnhdlc_vars *hdlc, int do_adapt56);
extern int isdnhdlc_decode (struct isdnhdlc_vars *hdlc, const unsigned char *src, int slen,int *count,
return (0);
#endif /* CONFIG_PCI */
}
+
+#ifdef __ISAPNP__
ready:
+#endif
+
/* In case of the sedlbauer pcmcia card, this region is in use,
* reserved for us by the card manager. So we do not check it
* here, it would fail.
DEBUG(0, "sedlbauer_attach()\n");
/* Allocate space for private device-specific data */
- local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+ local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) return -ENOMEM;
- memset(local, 0, sizeof(local_info_t));
local->cardnr = -1;
local->p_dev = link;
#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
+#include <linux/bitrev.h>
#include "st5481.h"
static inline void B_L1L2(struct st5481_bcs *bcs, int pr, void *arg)
register unsigned char *dest = urb->transfer_buffer+len;
register unsigned int count;
for (count = 0; count < bytes_sent; count++)
- *dest++ = isdnhdlc_bit_rev_tab[*src++];
+ *dest++ = bitrev8(*src++);
}
len += bytes_sent;
} else {
char buf[256];
va_start(args, fmt);
- vsprintf(buf, fmt, args);
+ vsnprintf(buf, sizeof(buf), fmt, args);
DBG(8, "%s", buf);
va_end(args);
}
char buf[256];
va_start(args, fmt);
- vsprintf(buf, fmt, args);
+ vsnprintf(buf, sizeof(buf), fmt, args);
DBG(0x2, "%s", buf);
va_end(args);
}
le16_to_cpu(dev->descriptor.idProduct),
number_of_leds);
- adapter = kmalloc(sizeof(struct st5481_adapter), GFP_KERNEL);
+ adapter = kzalloc(sizeof(struct st5481_adapter), GFP_KERNEL);
if (!adapter)
return -ENOMEM;
- memset(adapter, 0, sizeof(struct st5481_adapter));
-
adapter->number_of_leds = number_of_leds;
adapter->usb_dev = dev;
DEBUG(0, "teles_attach()\n");
/* Allocate space for private device-specific data */
- local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+ local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) return -ENOMEM;
- memset(local, 0, sizeof(local_info_t));
local->cardnr = -1;
local->p_dev = link;
return 1;
}
if (!card->hyctrlinfo) {
- cinfo = (hycapictrl_info *) kmalloc(sizeof(hycapictrl_info), GFP_ATOMIC);
+ cinfo = kzalloc(sizeof(hycapictrl_info), GFP_ATOMIC);
if (!cinfo) {
printk(KERN_WARNING "HYSDN: no memory for capi-ctrl.\n");
return -ENOMEM;
}
- memset(cinfo, 0, sizeof(hycapictrl_info));
card->hyctrlinfo = cinfo;
cinfo->card = card;
spin_lock_init(&cinfo->lock);
return (-ERR_ALREADY_BOOT); /* boot already active */
}
/* error no mem available */
- if (!(boot = kmalloc(sizeof(struct boot_data), GFP_KERNEL))) {
+ if (!(boot = kzalloc(sizeof(struct boot_data), GFP_KERNEL))) {
if (card->debug_flags & LOG_MEM_ERR)
hysdn_addlog(card, "POF open: unable to allocate mem");
return (-EFAULT);
}
card->boot = boot;
card->state = CARD_STATE_BOOTING;
- memset(boot, 0, sizeof(struct boot_data));
card->stopcard(card); /* first stop the card */
if (card->testram(card)) {
if (pci_enable_device(akt_pcidev))
continue;
- if (!(card = kmalloc(sizeof(hysdn_card), GFP_KERNEL))) {
+ if (!(card = kzalloc(sizeof(hysdn_card), GFP_KERNEL))) {
printk(KERN_ERR "HYSDN: unable to alloc device mem \n");
return;
}
- memset(card, 0, sizeof(hysdn_card));
card->myid = cardmax; /* set own id */
card->bus = akt_pcidev->bus->number;
card->devfn = akt_pcidev->devfn; /* slot + function */
return (-ENOMEM);
}
hysdn_net_release(card); /* release an existing net device */
- if ((dev = kmalloc(sizeof(struct net_local), GFP_KERNEL)) == NULL) {
+ if ((dev = kzalloc(sizeof(struct net_local), GFP_KERNEL)) == NULL) {
printk(KERN_WARNING "HYSDN: unable to allocate mem\n");
return (-ENOMEM);
}
- memset(dev, 0, sizeof(struct net_local)); /* clean the structure */
spin_lock_init(&((struct net_local *) dev)->lock);
} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
/* read access -> output card info data */
- if (!(tmp = (char *) kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) {
+ if (!(tmp = kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) {
unlock_kernel();
return (-EFAULT); /* out of memory */
}
if (pd->if_used <= 0)
return; /* no open file for read */
- if (!(ib = (struct log_data *) kmalloc(sizeof(struct log_data) + strlen(cp), GFP_ATOMIC)))
+ if (!(ib = kmalloc(sizeof(struct log_data) + strlen(cp), GFP_ATOMIC)))
return; /* no memory */
strcpy(ib->log_start, cp); /* set output string */
ib->next = NULL;
{
struct log_data *inf;
int len;
- struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
struct procdata *pd = NULL;
hysdn_card *card;
hysdn_log_poll(struct file *file, poll_table * wait)
{
unsigned int mask = 0;
- struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
hysdn_card *card;
struct procdata *pd = NULL;
/* create a cardlog proc entry */
- if ((pd = (struct procdata *) kmalloc(sizeof(struct procdata), GFP_KERNEL)) != NULL) {
- memset(pd, 0, sizeof(struct procdata));
+ if ((pd = kzalloc(sizeof(struct procdata), GFP_KERNEL)) != NULL) {
sprintf(pd->log_name, "%s%d", PROC_LOG_BASENAME, card->myid);
if ((pd->log = create_proc_entry(pd->log_name, S_IFREG | S_IRUGO | S_IWUSR, hysdn_proc_entry)) != NULL) {
pd->log->proc_fops = &log_fops;
isdn_audio_adpcm_init(adpcm_state * s, int nbits)
{
if (!s)
- s = (adpcm_state *) kmalloc(sizeof(adpcm_state), GFP_ATOMIC);
+ s = kmalloc(sizeof(adpcm_state), GFP_ATOMIC);
if (s) {
s->a = 0;
s->d = 5;
isdn_audio_dtmf_init(dtmf_state * s)
{
if (!s)
- s = (dtmf_state *) kmalloc(sizeof(dtmf_state), GFP_ATOMIC);
+ s = kmalloc(sizeof(dtmf_state), GFP_ATOMIC);
if (s) {
s->idx = 0;
s->last = ' ';
isdn_audio_silence_init(silence_state * s)
{
if (!s)
- s = (silence_state *) kmalloc(sizeof(silence_state), GFP_ATOMIC);
+ s = kmalloc(sizeof(silence_state), GFP_ATOMIC);
if (s) {
s->idx = 0;
s->state = 0;
* Allocate the main control structure for this instance.
*/
maxmaxcode = MAXCODE(bits);
- db = (struct bsd_db *) kmalloc (sizeof (struct bsd_db),GFP_KERNEL);
+ db = kzalloc (sizeof (struct bsd_db),GFP_KERNEL);
if (!db)
return NULL;
- memset (db, 0, sizeof(struct bsd_db));
-
db->xmit = data->flags & IPPP_COMP_FLAG_XMIT;
decomp = db->xmit ? 0 : 1;
static ssize_t
isdn_read(struct file *file, char __user *buf, size_t count, loff_t * off)
{
- uint minor = iminor(file->f_dentry->d_inode);
+ uint minor = iminor(file->f_path.dentry->d_inode);
int len = 0;
int drvidx;
int chidx;
static ssize_t
isdn_write(struct file *file, const char __user *buf, size_t count, loff_t * off)
{
- uint minor = iminor(file->f_dentry->d_inode);
+ uint minor = iminor(file->f_path.dentry->d_inode);
int drvidx;
int chidx;
int retval;
isdn_poll(struct file *file, poll_table * wait)
{
unsigned int mask = 0;
- unsigned int minor = iminor(file->f_dentry->d_inode);
+ unsigned int minor = iminor(file->f_path.dentry->d_inode);
int drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL);
lock_kernel();
if ((adding) && (d->rcverr))
kfree(d->rcverr);
- if (!(d->rcverr = kmalloc(sizeof(int) * m, GFP_ATOMIC))) {
+ if (!(d->rcverr = kzalloc(sizeof(int) * m, GFP_ATOMIC))) {
printk(KERN_WARNING "register_isdn: Could not alloc rcverr\n");
return -1;
}
- memset((char *) d->rcverr, 0, sizeof(int) * m);
if ((adding) && (d->rcvcount))
kfree(d->rcvcount);
- if (!(d->rcvcount = kmalloc(sizeof(int) * m, GFP_ATOMIC))) {
+ if (!(d->rcvcount = kzalloc(sizeof(int) * m, GFP_ATOMIC))) {
printk(KERN_WARNING "register_isdn: Could not alloc rcvcount\n");
if (!adding)
kfree(d->rcverr);
return -1;
}
- memset((char *) d->rcvcount, 0, sizeof(int) * m);
if ((adding) && (d->rpqueue)) {
for (j = 0; j < d->channels; j++)
printk(KERN_WARNING "register_isdn: No write routine given.\n");
return 0;
}
- if (!(d = kmalloc(sizeof(isdn_driver_t), GFP_KERNEL))) {
+ if (!(d = kzalloc(sizeof(isdn_driver_t), GFP_KERNEL))) {
printk(KERN_WARNING "register_isdn: Could not alloc driver-struct\n");
return 0;
}
- memset((char *) d, 0, sizeof(isdn_driver_t));
d->maxbufsize = i->maxbufsize;
d->pktcount = 0;
printk(KERN_WARNING "isdn_net: interface %s already exists\n", name);
return NULL;
}
- if (!(netdev = (isdn_net_dev *) kmalloc(sizeof(isdn_net_dev), GFP_KERNEL))) {
+ if (!(netdev = kzalloc(sizeof(isdn_net_dev), GFP_KERNEL))) {
printk(KERN_WARNING "isdn_net: Could not allocate net-device\n");
return NULL;
}
- memset(netdev, 0, sizeof(isdn_net_dev));
- if (!(netdev->local = (isdn_net_local *) kmalloc(sizeof(isdn_net_local), GFP_KERNEL))) {
+ if (!(netdev->local = kzalloc(sizeof(isdn_net_local), GFP_KERNEL))) {
printk(KERN_WARNING "isdn_net: Could not allocate device locals\n");
kfree(netdev);
return NULL;
}
- memset(netdev->local, 0, sizeof(isdn_net_local));
if (name == NULL)
strcpy(netdev->local->name, " ");
else
isdn_net_phone *n;
if (p) {
- if (!(n = (isdn_net_phone *) kmalloc(sizeof(isdn_net_phone), GFP_KERNEL)))
+ if (!(n = kmalloc(sizeof(isdn_net_phone), GFP_KERNEL)))
return -ENOMEM;
strcpy(n->num, phone->phone);
n->next = p->local->phone[phone->outgoing & 1];
if (is->debug & 0x2)
printk(KERN_DEBUG "isdn_ppp_poll: minor: %d\n",
- iminor(file->f_dentry->d_inode));
+ iminor(file->f_path.dentry->d_inode));
/* just registers wait_queue hook. This doesn't really wait. */
poll_wait(file, &is->wq, wait);
printk(KERN_DEBUG "ippp: device not activated.\n");
return 0;
}
- nbuf = (unsigned char *) kmalloc(len + 4, GFP_ATOMIC);
+ nbuf = kmalloc(len + 4, GFP_ATOMIC);
if (!nbuf) {
printk(KERN_WARNING "ippp: Can't alloc buf\n");
return 0;
#endif /* CONFIG_ISDN_MPP */
for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
- if (!(ippp_table[i] = (struct ippp_struct *)
- kmalloc(sizeof(struct ippp_struct), GFP_KERNEL))) {
+ if (!(ippp_table[i] = kzalloc(sizeof(struct ippp_struct), GFP_KERNEL))) {
printk(KERN_WARNING "isdn_ppp_init: Could not alloc ippp_table\n");
for (j = 0; j < i; j++)
kfree(ippp_table[j]);
return -1;
}
- memset((char *) ippp_table[i], 0, sizeof(struct ippp_struct));
spin_lock_init(&ippp_table[i]->buflock);
ippp_table[i]->state = 0;
ippp_table[i]->first = ippp_table[i]->rq + NUM_RCV_BUFFS - 1;
{
int i;
int sz = ISDN_MAX_CHANNELS*sizeof(ippp_bundle);
- if( (isdn_ppp_bundle_arr = (ippp_bundle*)kmalloc(sz,
- GFP_KERNEL)) == NULL )
+ if( (isdn_ppp_bundle_arr = kzalloc(sz, GFP_KERNEL)) == NULL )
return -ENOMEM;
- memset(isdn_ppp_bundle_arr, 0, sz);
for( i = 0; i < ISDN_MAX_CHANNELS; i++ )
spin_lock_init(&isdn_ppp_bundle_arr[i].lock);
return 0;
static struct ippp_ccp_reset *isdn_ppp_ccp_reset_alloc(struct ippp_struct *is)
{
struct ippp_ccp_reset *r;
- r = kmalloc(sizeof(struct ippp_ccp_reset), GFP_KERNEL);
+ r = kzalloc(sizeof(struct ippp_ccp_reset), GFP_KERNEL);
if(!r) {
printk(KERN_ERR "ippp_ccp: failed to allocate reset data"
" structure - no mem\n");
return NULL;
}
- memset(r, 0, sizeof(struct ippp_ccp_reset));
printk(KERN_DEBUG "ippp_ccp: allocated reset data structure %p\n", r);
is->reset = r;
return r;
id);
return NULL;
} else {
- rs = kmalloc(sizeof(struct ippp_ccp_reset_state), GFP_KERNEL);
+ rs = kzalloc(sizeof(struct ippp_ccp_reset_state), GFP_KERNEL);
if(!rs)
return NULL;
- memset(rs, 0, sizeof(struct ippp_ccp_reset_state));
rs->state = CCPResetIdle;
rs->is = is;
rs->id = id;
rsparm.maxdlen = IPPP_RESET_MAXDATABYTES;
skb_out = dev_alloc_skb(is->mru + PPP_HDRLEN);
+ if (!skb_out) {
+ kfree_skb(skb);
+ printk(KERN_ERR "ippp: decomp memory allocation failure\n");
+ return NULL;
+ }
len = ipc->decompress(stat, skb, skb_out, &rsparm);
kfree_skb(skb);
if (len <= 0) {
}
static void
-isdn_tty_set_termios(struct tty_struct *tty, struct termios *old_termios)
+isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
modem_info *info = (modem_info *) tty->driver_data;
int i;
isdn_v110_stream *v;
- if ((v = kmalloc(sizeof(isdn_v110_stream), GFP_ATOMIC)) == NULL)
+ if ((v = kzalloc(sizeof(isdn_v110_stream), GFP_ATOMIC)) == NULL)
return NULL;
- memset(v, 0, sizeof(isdn_v110_stream));
v->key = key;
v->nbits = 0;
for (i = 0; key & (1 << i); i++)
icn_card *card;
int i;
- if (!(card = (icn_card *) kmalloc(sizeof(icn_card), GFP_KERNEL))) {
+ if (!(card = kzalloc(sizeof(icn_card), GFP_KERNEL))) {
printk(KERN_WARNING
"icn: (%s) Could not allocate card-struct.\n", id);
return (icn_card *) 0;
}
- memset((char *) card, 0, sizeof(icn_card));
spin_lock_init(&card->lock);
card->port = port;
card->interface.owner = THIS_MODULE;
isdnloop_card *card;
int i;
- if (!(card = (isdnloop_card *) kmalloc(sizeof(isdnloop_card), GFP_KERNEL))) {
+ if (!(card = kzalloc(sizeof(isdnloop_card), GFP_KERNEL))) {
printk(KERN_WARNING
"isdnloop: (%s) Could not allocate card-struct.\n", id);
return (isdnloop_card *) 0;
}
- memset((char *) card, 0, sizeof(isdnloop_card));
card->interface.owner = THIS_MODULE;
card->interface.channels = ISDNLOOP_BCH;
card->interface.hl_hdrlen = 1; /* scratch area for storing ack flag*/
struct pcbit_dev *dev;
isdn_if *dev_if;
- if ((dev=kmalloc(sizeof(struct pcbit_dev), GFP_KERNEL)) == NULL)
+ if ((dev=kzalloc(sizeof(struct pcbit_dev), GFP_KERNEL)) == NULL)
{
printk("pcbit_init: couldn't malloc pcbit_dev struct\n");
return -ENOMEM;
}
dev_pcbit[board] = dev;
- memset(dev, 0, sizeof(struct pcbit_dev));
init_waitqueue_head(&dev->set_running_wq);
spin_lock_init(&dev->lock);
return -EACCES;
}
- dev->b1 = kmalloc(sizeof(struct pcbit_chan), GFP_KERNEL);
+ dev->b1 = kzalloc(sizeof(struct pcbit_chan), GFP_KERNEL);
if (!dev->b1) {
printk("pcbit_init: couldn't malloc pcbit_chan struct\n");
iounmap(dev->sh_mem);
return -ENOMEM;
}
- dev->b2 = kmalloc(sizeof(struct pcbit_chan), GFP_KERNEL);
+ dev->b2 = kzalloc(sizeof(struct pcbit_chan), GFP_KERNEL);
if (!dev->b2) {
printk("pcbit_init: couldn't malloc pcbit_chan struct\n");
kfree(dev->b1);
return -ENOMEM;
}
- memset(dev->b1, 0, sizeof(struct pcbit_chan));
- memset(dev->b2, 0, sizeof(struct pcbit_chan));
dev->b2->id = 1;
INIT_WORK(&dev->qdelivery, pcbit_deliver);
dev_kfree_skb(skb);
return -1;
}
- if ((frame = (struct frame_buf *) kmalloc(sizeof(struct frame_buf),
+ if ((frame = kmalloc(sizeof(struct frame_buf),
GFP_ATOMIC)) == NULL) {
printk(KERN_WARNING "pcbit_2_write: kmalloc failed\n");
dev_kfree_skb(skb);
kfree(dev->read_frame);
dev->read_frame = NULL;
}
- frame = kmalloc(sizeof(struct frame_buf), GFP_ATOMIC);
+ frame = kzalloc(sizeof(struct frame_buf), GFP_ATOMIC);
if (frame == NULL) {
printk(KERN_WARNING "kmalloc failed\n");
return;
}
- memset(frame, 0, sizeof(struct frame_buf));
cpu = pcbit_readb(dev);
proc = pcbit_readb(dev);
* Horray! We found a board, Make sure we can register
* it with ISDN4Linux
*/
- interface = kmalloc(sizeof(isdn_if), GFP_KERNEL);
+ interface = kzalloc(sizeof(isdn_if), GFP_KERNEL);
if (interface == NULL) {
/*
* Oops, can't malloc isdn_if
*/
continue;
}
- memset(interface, 0, sizeof(isdn_if));
interface->owner = THIS_MODULE;
interface->hl_hdrlen = 0;
/*
* Allocate the board structure
*/
- sc_adapter[cinst] = kmalloc(sizeof(board), GFP_KERNEL);
+ sc_adapter[cinst] = kzalloc(sizeof(board), GFP_KERNEL);
if (sc_adapter[cinst] == NULL) {
/*
* Oops, can't alloc memory for the board
kfree(interface);
continue;
}
- memset(sc_adapter[cinst], 0, sizeof(board));
spin_lock_init(&sc_adapter[cinst]->lock);
if(!register_isdn(interface)) {
/*
* Allocate channels status structures
*/
- sc_adapter[cinst]->channel = kmalloc(sizeof(bchan) * channels, GFP_KERNEL);
+ sc_adapter[cinst]->channel = kzalloc(sizeof(bchan) * channels, GFP_KERNEL);
if (sc_adapter[cinst]->channel == NULL) {
/*
* Oops, can't alloc memory for the channels
kfree(sc_adapter[cinst]);
continue;
}
- memset(sc_adapter[cinst]->channel, 0, sizeof(bchan) * channels);
/*
* Lock down the hardware resources
--- /dev/null
+#
+# KVM configuration
+#
+menu "Virtualization"
+
+config KVM
+ tristate "Kernel-based Virtual Machine (KVM) support"
+ depends on X86 && EXPERIMENTAL
+ ---help---
+ Support hosting fully virtualized guest machines using hardware
+ virtualization extensions. You will need a fairly recent
+ processor equipped with virtualization extensions. You will also
+ need to select one or more of the processor modules below.
+
+ This module provides access to the hardware capabilities through
+ a character device node named /dev/kvm.
+
+ To compile this as a module, choose M here: the module
+ will be called kvm.
+
+ If unsure, say N.
+
+config KVM_INTEL
+ tristate "KVM for Intel processors support"
+ depends on KVM
+ ---help---
+ Provides support for KVM on Intel processors equipped with the VT
+ extensions.
+
+config KVM_AMD
+ tristate "KVM for AMD processors support"
+ depends on KVM
+ ---help---
+ Provides support for KVM on AMD processors equipped with the AMD-V
+ (SVM) extensions.
+
+endmenu
--- /dev/null
+#
+# Makefile for Kernel-based Virtual Machine module
+#
+
+kvm-objs := kvm_main.o mmu.o x86_emulate.o
+obj-$(CONFIG_KVM) += kvm.o
+kvm-intel-objs = vmx.o
+obj-$(CONFIG_KVM_INTEL) += kvm-intel.o
+kvm-amd-objs = svm.o
+obj-$(CONFIG_KVM_AMD) += kvm-amd.o
--- /dev/null
+#ifndef __KVM_H
+#define __KVM_H
+
+/*
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ */
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+
+#include "vmx.h"
+#include <linux/kvm.h>
+
+#define CR0_PE_MASK (1ULL << 0)
+#define CR0_TS_MASK (1ULL << 3)
+#define CR0_NE_MASK (1ULL << 5)
+#define CR0_WP_MASK (1ULL << 16)
+#define CR0_NW_MASK (1ULL << 29)
+#define CR0_CD_MASK (1ULL << 30)
+#define CR0_PG_MASK (1ULL << 31)
+
+#define CR3_WPT_MASK (1ULL << 3)
+#define CR3_PCD_MASK (1ULL << 4)
+
+#define CR3_RESEVED_BITS 0x07ULL
+#define CR3_L_MODE_RESEVED_BITS (~((1ULL << 40) - 1) | 0x0fe7ULL)
+#define CR3_FLAGS_MASK ((1ULL << 5) - 1)
+
+#define CR4_VME_MASK (1ULL << 0)
+#define CR4_PSE_MASK (1ULL << 4)
+#define CR4_PAE_MASK (1ULL << 5)
+#define CR4_PGE_MASK (1ULL << 7)
+#define CR4_VMXE_MASK (1ULL << 13)
+
+#define KVM_GUEST_CR0_MASK \
+ (CR0_PG_MASK | CR0_PE_MASK | CR0_WP_MASK | CR0_NE_MASK \
+ | CR0_NW_MASK | CR0_CD_MASK)
+#define KVM_VM_CR0_ALWAYS_ON \
+ (CR0_PG_MASK | CR0_PE_MASK | CR0_WP_MASK | CR0_NE_MASK)
+#define KVM_GUEST_CR4_MASK \
+ (CR4_PSE_MASK | CR4_PAE_MASK | CR4_PGE_MASK | CR4_VMXE_MASK | CR4_VME_MASK)
+#define KVM_PMODE_VM_CR4_ALWAYS_ON (CR4_VMXE_MASK | CR4_PAE_MASK)
+#define KVM_RMODE_VM_CR4_ALWAYS_ON (CR4_VMXE_MASK | CR4_PAE_MASK | CR4_VME_MASK)
+
+#define INVALID_PAGE (~(hpa_t)0)
+#define UNMAPPED_GVA (~(gpa_t)0)
+
+#define KVM_MAX_VCPUS 1
+#define KVM_MEMORY_SLOTS 4
+#define KVM_NUM_MMU_PAGES 256
+
+#define FX_IMAGE_SIZE 512
+#define FX_IMAGE_ALIGN 16
+#define FX_BUF_SIZE (2 * FX_IMAGE_SIZE + FX_IMAGE_ALIGN)
+
+#define DE_VECTOR 0
+#define DF_VECTOR 8
+#define TS_VECTOR 10
+#define NP_VECTOR 11
+#define SS_VECTOR 12
+#define GP_VECTOR 13
+#define PF_VECTOR 14
+
+#define SELECTOR_TI_MASK (1 << 2)
+#define SELECTOR_RPL_MASK 0x03
+
+#define IOPL_SHIFT 12
+
+/*
+ * Address types:
+ *
+ * gva - guest virtual address
+ * gpa - guest physical address
+ * gfn - guest frame number
+ * hva - host virtual address
+ * hpa - host physical address
+ * hfn - host frame number
+ */
+
+typedef unsigned long gva_t;
+typedef u64 gpa_t;
+typedef unsigned long gfn_t;
+
+typedef unsigned long hva_t;
+typedef u64 hpa_t;
+typedef unsigned long hfn_t;
+
+struct kvm_mmu_page {
+ struct list_head link;
+ hpa_t page_hpa;
+ unsigned long slot_bitmap; /* One bit set per slot which has memory
+ * in this shadow page.
+ */
+ int global; /* Set if all ptes in this page are global */
+ u64 *parent_pte;
+};
+
+struct vmcs {
+ u32 revision_id;
+ u32 abort;
+ char data[0];
+};
+
+#define vmx_msr_entry kvm_msr_entry
+
+struct kvm_vcpu;
+
+/*
+ * x86 supports 3 paging modes (4-level 64-bit, 3-level 64-bit, and 2-level
+ * 32-bit). The kvm_mmu structure abstracts the details of the current mmu
+ * mode.
+ */
+struct kvm_mmu {
+ void (*new_cr3)(struct kvm_vcpu *vcpu);
+ int (*page_fault)(struct kvm_vcpu *vcpu, gva_t gva, u32 err);
+ void (*inval_page)(struct kvm_vcpu *vcpu, gva_t gva);
+ void (*free)(struct kvm_vcpu *vcpu);
+ gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t gva);
+ hpa_t root_hpa;
+ int root_level;
+ int shadow_root_level;
+};
+
+struct kvm_guest_debug {
+ int enabled;
+ unsigned long bp[4];
+ int singlestep;
+};
+
+enum {
+ VCPU_REGS_RAX = 0,
+ VCPU_REGS_RCX = 1,
+ VCPU_REGS_RDX = 2,
+ VCPU_REGS_RBX = 3,
+ VCPU_REGS_RSP = 4,
+ VCPU_REGS_RBP = 5,
+ VCPU_REGS_RSI = 6,
+ VCPU_REGS_RDI = 7,
+#ifdef CONFIG_X86_64
+ VCPU_REGS_R8 = 8,
+ VCPU_REGS_R9 = 9,
+ VCPU_REGS_R10 = 10,
+ VCPU_REGS_R11 = 11,
+ VCPU_REGS_R12 = 12,
+ VCPU_REGS_R13 = 13,
+ VCPU_REGS_R14 = 14,
+ VCPU_REGS_R15 = 15,
+#endif
+ NR_VCPU_REGS
+};
+
+enum {
+ VCPU_SREG_CS,
+ VCPU_SREG_DS,
+ VCPU_SREG_ES,
+ VCPU_SREG_FS,
+ VCPU_SREG_GS,
+ VCPU_SREG_SS,
+ VCPU_SREG_TR,
+ VCPU_SREG_LDTR,
+};
+
+struct kvm_vcpu {
+ struct kvm *kvm;
+ union {
+ struct vmcs *vmcs;
+ struct vcpu_svm *svm;
+ };
+ struct mutex mutex;
+ int cpu;
+ int launched;
+ unsigned long irq_summary; /* bit vector: 1 per word in irq_pending */
+#define NR_IRQ_WORDS KVM_IRQ_BITMAP_SIZE(unsigned long)
+ unsigned long irq_pending[NR_IRQ_WORDS];
+ unsigned long regs[NR_VCPU_REGS]; /* for rsp: vcpu_load_rsp_rip() */
+ unsigned long rip; /* needs vcpu_load_rsp_rip() */
+
+ unsigned long cr0;
+ unsigned long cr2;
+ unsigned long cr3;
+ unsigned long cr4;
+ unsigned long cr8;
+ u64 shadow_efer;
+ u64 apic_base;
+ int nmsrs;
+ struct vmx_msr_entry *guest_msrs;
+ struct vmx_msr_entry *host_msrs;
+
+ struct list_head free_pages;
+ struct kvm_mmu_page page_header_buf[KVM_NUM_MMU_PAGES];
+ struct kvm_mmu mmu;
+
+ struct kvm_guest_debug guest_debug;
+
+ char fx_buf[FX_BUF_SIZE];
+ char *host_fx_image;
+ char *guest_fx_image;
+
+ int mmio_needed;
+ int mmio_read_completed;
+ int mmio_is_write;
+ int mmio_size;
+ unsigned char mmio_data[8];
+ gpa_t mmio_phys_addr;
+
+ struct {
+ int active;
+ u8 save_iopl;
+ struct kvm_save_segment {
+ u16 selector;
+ unsigned long base;
+ u32 limit;
+ u32 ar;
+ } tr, es, ds, fs, gs;
+ } rmode;
+};
+
+struct kvm_memory_slot {
+ gfn_t base_gfn;
+ unsigned long npages;
+ unsigned long flags;
+ struct page **phys_mem;
+ unsigned long *dirty_bitmap;
+};
+
+struct kvm {
+ spinlock_t lock; /* protects everything except vcpus */
+ int nmemslots;
+ struct kvm_memory_slot memslots[KVM_MEMORY_SLOTS];
+ struct list_head active_mmu_pages;
+ struct kvm_vcpu vcpus[KVM_MAX_VCPUS];
+ int memory_config_version;
+ int busy;
+};
+
+struct kvm_stat {
+ u32 pf_fixed;
+ u32 pf_guest;
+ u32 tlb_flush;
+ u32 invlpg;
+
+ u32 exits;
+ u32 io_exits;
+ u32 mmio_exits;
+ u32 signal_exits;
+ u32 irq_exits;
+};
+
+struct descriptor_table {
+ u16 limit;
+ unsigned long base;
+} __attribute__((packed));
+
+struct kvm_arch_ops {
+ int (*cpu_has_kvm_support)(void); /* __init */
+ int (*disabled_by_bios)(void); /* __init */
+ void (*hardware_enable)(void *dummy); /* __init */
+ void (*hardware_disable)(void *dummy);
+ int (*hardware_setup)(void); /* __init */
+ void (*hardware_unsetup)(void); /* __exit */
+
+ int (*vcpu_create)(struct kvm_vcpu *vcpu);
+ void (*vcpu_free)(struct kvm_vcpu *vcpu);
+
+ struct kvm_vcpu *(*vcpu_load)(struct kvm_vcpu *vcpu);
+ void (*vcpu_put)(struct kvm_vcpu *vcpu);
+
+ int (*set_guest_debug)(struct kvm_vcpu *vcpu,
+ struct kvm_debug_guest *dbg);
+ int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
+ int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
+ u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
+ void (*get_segment)(struct kvm_vcpu *vcpu,
+ struct kvm_segment *var, int seg);
+ void (*set_segment)(struct kvm_vcpu *vcpu,
+ struct kvm_segment *var, int seg);
+ int (*is_long_mode)(struct kvm_vcpu *vcpu);
+ void (*get_cs_db_l_bits)(struct kvm_vcpu *vcpu, int *db, int *l);
+ void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
+ void (*set_cr0_no_modeswitch)(struct kvm_vcpu *vcpu,
+ unsigned long cr0);
+ void (*set_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3);
+ void (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
+ void (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
+ void (*get_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+ void (*set_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+ void (*get_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+ void (*set_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
+ unsigned long (*get_dr)(struct kvm_vcpu *vcpu, int dr);
+ void (*set_dr)(struct kvm_vcpu *vcpu, int dr, unsigned long value,
+ int *exception);
+ void (*cache_regs)(struct kvm_vcpu *vcpu);
+ void (*decache_regs)(struct kvm_vcpu *vcpu);
+ unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
+ void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
+
+ void (*invlpg)(struct kvm_vcpu *vcpu, gva_t addr);
+ void (*tlb_flush)(struct kvm_vcpu *vcpu);
+ void (*inject_page_fault)(struct kvm_vcpu *vcpu,
+ unsigned long addr, u32 err_code);
+
+ void (*inject_gp)(struct kvm_vcpu *vcpu, unsigned err_code);
+
+ int (*run)(struct kvm_vcpu *vcpu, struct kvm_run *run);
+ int (*vcpu_setup)(struct kvm_vcpu *vcpu);
+ void (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
+};
+
+extern struct kvm_stat kvm_stat;
+extern struct kvm_arch_ops *kvm_arch_ops;
+
+#define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt)
+#define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt)
+
+int kvm_init_arch(struct kvm_arch_ops *ops, struct module *module);
+void kvm_exit_arch(void);
+
+void kvm_mmu_destroy(struct kvm_vcpu *vcpu);
+int kvm_mmu_init(struct kvm_vcpu *vcpu);
+
+int kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
+void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot);
+
+hpa_t gpa_to_hpa(struct kvm_vcpu *vcpu, gpa_t gpa);
+#define HPA_MSB ((sizeof(hpa_t) * 8) - 1)
+#define HPA_ERR_MASK ((hpa_t)1 << HPA_MSB)
+static inline int is_error_hpa(hpa_t hpa) { return hpa >> HPA_MSB; }
+hpa_t gva_to_hpa(struct kvm_vcpu *vcpu, gva_t gva);
+
+void kvm_emulator_want_group7_invlpg(void);
+
+extern hpa_t bad_page_address;
+
+static inline struct page *gfn_to_page(struct kvm_memory_slot *slot, gfn_t gfn)
+{
+ return slot->phys_mem[gfn - slot->base_gfn];
+}
+
+struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn);
+void mark_page_dirty(struct kvm *kvm, gfn_t gfn);
+
+enum emulation_result {
+ EMULATE_DONE, /* no further processing */
+ EMULATE_DO_MMIO, /* kvm_run filled with mmio request */
+ EMULATE_FAIL, /* can't emulate this instruction */
+};
+
+int emulate_instruction(struct kvm_vcpu *vcpu, struct kvm_run *run,
+ unsigned long cr2, u16 error_code);
+void realmode_lgdt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
+void realmode_lidt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
+void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
+ unsigned long *rflags);
+
+unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr);
+void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long value,
+ unsigned long *rflags);
+
+struct x86_emulate_ctxt;
+
+int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address);
+int emulate_clts(struct kvm_vcpu *vcpu);
+int emulator_get_dr(struct x86_emulate_ctxt* ctxt, int dr,
+ unsigned long *dest);
+int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr,
+ unsigned long value);
+
+void set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
+void set_cr3(struct kvm_vcpu *vcpu, unsigned long cr0);
+void set_cr4(struct kvm_vcpu *vcpu, unsigned long cr0);
+void set_cr8(struct kvm_vcpu *vcpu, unsigned long cr0);
+void lmsw(struct kvm_vcpu *vcpu, unsigned long msw);
+
+#ifdef CONFIG_X86_64
+void set_efer(struct kvm_vcpu *vcpu, u64 efer);
+#endif
+
+void fx_init(struct kvm_vcpu *vcpu);
+
+void load_msrs(struct vmx_msr_entry *e, int n);
+void save_msrs(struct vmx_msr_entry *e, int n);
+void kvm_resched(struct kvm_vcpu *vcpu);
+
+int kvm_read_guest(struct kvm_vcpu *vcpu,
+ gva_t addr,
+ unsigned long size,
+ void *dest);
+
+int kvm_write_guest(struct kvm_vcpu *vcpu,
+ gva_t addr,
+ unsigned long size,
+ void *data);
+
+unsigned long segment_base(u16 selector);
+
+static inline struct page *_gfn_to_page(struct kvm *kvm, gfn_t gfn)
+{
+ struct kvm_memory_slot *slot = gfn_to_memslot(kvm, gfn);
+ return (slot) ? slot->phys_mem[gfn - slot->base_gfn] : NULL;
+}
+
+static inline int is_pae(struct kvm_vcpu *vcpu)
+{
+ return vcpu->cr4 & CR4_PAE_MASK;
+}
+
+static inline int is_pse(struct kvm_vcpu *vcpu)
+{
+ return vcpu->cr4 & CR4_PSE_MASK;
+}
+
+static inline int is_paging(struct kvm_vcpu *vcpu)
+{
+ return vcpu->cr0 & CR0_PG_MASK;
+}
+
+static inline int memslot_id(struct kvm *kvm, struct kvm_memory_slot *slot)
+{
+ return slot - kvm->memslots;
+}
+
+static inline struct kvm_mmu_page *page_header(hpa_t shadow_page)
+{
+ struct page *page = pfn_to_page(shadow_page >> PAGE_SHIFT);
+
+ return (struct kvm_mmu_page *)page->private;
+}
+
+static inline u16 read_fs(void)
+{
+ u16 seg;
+ asm ("mov %%fs, %0" : "=g"(seg));
+ return seg;
+}
+
+static inline u16 read_gs(void)
+{
+ u16 seg;
+ asm ("mov %%gs, %0" : "=g"(seg));
+ return seg;
+}
+
+static inline u16 read_ldt(void)
+{
+ u16 ldt;
+ asm ("sldt %0" : "=g"(ldt));
+ return ldt;
+}
+
+static inline void load_fs(u16 sel)
+{
+ asm ("mov %0, %%fs" : : "rm"(sel));
+}
+
+static inline void load_gs(u16 sel)
+{
+ asm ("mov %0, %%gs" : : "rm"(sel));
+}
+
+#ifndef load_ldt
+static inline void load_ldt(u16 sel)
+{
+ asm ("lldt %0" : : "g"(sel));
+}
+#endif
+
+static inline void get_idt(struct descriptor_table *table)
+{
+ asm ("sidt %0" : "=m"(*table));
+}
+
+static inline void get_gdt(struct descriptor_table *table)
+{
+ asm ("sgdt %0" : "=m"(*table));
+}
+
+static inline unsigned long read_tr_base(void)
+{
+ u16 tr;
+ asm ("str %0" : "=g"(tr));
+ return segment_base(tr);
+}
+
+#ifdef CONFIG_X86_64
+static inline unsigned long read_msr(unsigned long msr)
+{
+ u64 value;
+
+ rdmsrl(msr, value);
+ return value;
+}
+#endif
+
+static inline void fx_save(void *image)
+{
+ asm ("fxsave (%0)":: "r" (image));
+}
+
+static inline void fx_restore(void *image)
+{
+ asm ("fxrstor (%0)":: "r" (image));
+}
+
+static inline void fpu_init(void)
+{
+ asm ("finit");
+}
+
+static inline u32 get_rdx_init_val(void)
+{
+ return 0x600; /* P6 family */
+}
+
+#define ASM_VMX_VMCLEAR_RAX ".byte 0x66, 0x0f, 0xc7, 0x30"
+#define ASM_VMX_VMLAUNCH ".byte 0x0f, 0x01, 0xc2"
+#define ASM_VMX_VMRESUME ".byte 0x0f, 0x01, 0xc3"
+#define ASM_VMX_VMPTRLD_RAX ".byte 0x0f, 0xc7, 0x30"
+#define ASM_VMX_VMREAD_RDX_RAX ".byte 0x0f, 0x78, 0xd0"
+#define ASM_VMX_VMWRITE_RAX_RDX ".byte 0x0f, 0x79, 0xd0"
+#define ASM_VMX_VMWRITE_RSP_RDX ".byte 0x0f, 0x79, 0xd4"
+#define ASM_VMX_VMXOFF ".byte 0x0f, 0x01, 0xc4"
+#define ASM_VMX_VMXON_RAX ".byte 0xf3, 0x0f, 0xc7, 0x30"
+
+#define MSR_IA32_TIME_STAMP_COUNTER 0x010
+
+#define TSS_IOPB_BASE_OFFSET 0x66
+#define TSS_BASE_SIZE 0x68
+#define TSS_IOPB_SIZE (65536 / 8)
+#define TSS_REDIRECTION_SIZE (256 / 8)
+#define RMODE_TSS_SIZE (TSS_BASE_SIZE + TSS_REDIRECTION_SIZE + TSS_IOPB_SIZE + 1)
+
+#ifdef CONFIG_X86_64
+
+/*
+ * When emulating 32-bit mode, cr3 is only 32 bits even on x86_64. Therefore
+ * we need to allocate shadow page tables in the first 4GB of memory, which
+ * happens to fit the DMA32 zone.
+ */
+#define GFP_KVM_MMU (GFP_KERNEL | __GFP_DMA32)
+
+#else
+
+#define GFP_KVM_MMU GFP_KERNEL
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * Kernel-based Virtual Machine driver for Linux
+ *
+ * This module enables machines with Intel VT-x extensions to run virtual
+ * machines without emulation or binary translation.
+ *
+ * Copyright (C) 2006 Qumranet, Inc.
+ *
+ * Authors:
+ * Avi Kivity <avi@qumranet.com>
+ * Yaniv Kamay <yaniv@qumranet.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include "kvm.h"
+
+#include <linux/kvm.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <asm/processor.h>
+#include <linux/percpu.h>
+#include <linux/gfp.h>
+#include <asm/msr.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/vmalloc.h>
+#include <asm/uaccess.h>
+#include <linux/reboot.h>
+#include <asm/io.h>
+#include <linux/debugfs.h>
+#include <linux/highmem.h>
+#include <linux/file.h>
+#include <asm/desc.h>
+
+#include "x86_emulate.h"
+#include "segment_descriptor.h"
+
+MODULE_AUTHOR("Qumranet");
+MODULE_LICENSE("GPL");
+
+struct kvm_arch_ops *kvm_arch_ops;
+struct kvm_stat kvm_stat;
+EXPORT_SYMBOL_GPL(kvm_stat);
+
+static struct kvm_stats_debugfs_item {
+ const char *name;
+ u32 *data;
+ struct dentry *dentry;
+} debugfs_entries[] = {
+ { "pf_fixed", &kvm_stat.pf_fixed },
+ { "pf_guest", &kvm_stat.pf_guest },
+ { "tlb_flush", &kvm_stat.tlb_flush },
+ { "invlpg", &kvm_stat.invlpg },
+ { "exits", &kvm_stat.exits },
+ { "io_exits", &kvm_stat.io_exits },
+ { "mmio_exits", &kvm_stat.mmio_exits },
+ { "signal_exits", &kvm_stat.signal_exits },
+ { "irq_exits", &kvm_stat.irq_exits },
+ { 0, 0 }
+};
+
+static struct dentry *debugfs_dir;
+
+#define MAX_IO_MSRS 256
+
+#define CR0_RESEVED_BITS 0xffffffff1ffaffc0ULL
+#define LMSW_GUEST_MASK 0x0eULL
+#define CR4_RESEVED_BITS (~((1ULL << 11) - 1))
+#define CR8_RESEVED_BITS (~0x0fULL)
+#define EFER_RESERVED_BITS 0xfffffffffffff2fe
+
+#ifdef CONFIG_X86_64
+// LDT or TSS descriptor in the GDT. 16 bytes.
+struct segment_descriptor_64 {
+ struct segment_descriptor s;
+ u32 base_higher;
+ u32 pad_zero;
+};
+
+#endif
+
+unsigned long segment_base(u16 selector)
+{
+ struct descriptor_table gdt;
+ struct segment_descriptor *d;
+ unsigned long table_base;
+ typedef unsigned long ul;
+ unsigned long v;
+
+ if (selector == 0)
+ return 0;
+
+ asm ("sgdt %0" : "=m"(gdt));
+ table_base = gdt.base;
+
+ if (selector & 4) { /* from ldt */
+ u16 ldt_selector;
+
+ asm ("sldt %0" : "=g"(ldt_selector));
+ table_base = segment_base(ldt_selector);
+ }
+ d = (struct segment_descriptor *)(table_base + (selector & ~7));
+ v = d->base_low | ((ul)d->base_mid << 16) | ((ul)d->base_high << 24);
+#ifdef CONFIG_X86_64
+ if (d->system == 0
+ && (d->type == 2 || d->type == 9 || d->type == 11))
+ v |= ((ul)((struct segment_descriptor_64 *)d)->base_higher) << 32;
+#endif
+ return v;
+}
+EXPORT_SYMBOL_GPL(segment_base);
+
+int kvm_read_guest(struct kvm_vcpu *vcpu,
+ gva_t addr,
+ unsigned long size,
+ void *dest)
+{
+ unsigned char *host_buf = dest;
+ unsigned long req_size = size;
+
+ while (size) {
+ hpa_t paddr;
+ unsigned now;
+ unsigned offset;
+ hva_t guest_buf;
+
+ paddr = gva_to_hpa(vcpu, addr);
+
+ if (is_error_hpa(paddr))
+ break;
+
+ guest_buf = (hva_t)kmap_atomic(
+ pfn_to_page(paddr >> PAGE_SHIFT),
+ KM_USER0);
+ offset = addr & ~PAGE_MASK;
+ guest_buf |= offset;
+ now = min(size, PAGE_SIZE - offset);
+ memcpy(host_buf, (void*)guest_buf, now);
+ host_buf += now;
+ addr += now;
+ size -= now;
+ kunmap_atomic((void *)(guest_buf & PAGE_MASK), KM_USER0);
+ }
+ return req_size - size;
+}
+EXPORT_SYMBOL_GPL(kvm_read_guest);
+
+int kvm_write_guest(struct kvm_vcpu *vcpu,
+ gva_t addr,
+ unsigned long size,
+ void *data)
+{
+ unsigned char *host_buf = data;
+ unsigned long req_size = size;
+
+ while (size) {
+ hpa_t paddr;
+ unsigned now;
+ unsigned offset;
+ hva_t guest_buf;
+
+ paddr = gva_to_hpa(vcpu, addr);
+
+ if (is_error_hpa(paddr))
+ break;
+
+ guest_buf = (hva_t)kmap_atomic(
+ pfn_to_page(paddr >> PAGE_SHIFT), KM_USER0);
+ offset = addr & ~PAGE_MASK;
+ guest_buf |= offset;
+ now = min(size, PAGE_SIZE - offset);
+ memcpy((void*)guest_buf, host_buf, now);
+ host_buf += now;
+ addr += now;
+ size -= now;
+ kunmap_atomic((void *)(guest_buf & PAGE_MASK), KM_USER0);
+ }
+ return req_size - size;
+}
+EXPORT_SYMBOL_GPL(kvm_write_guest);
+
+static int vcpu_slot(struct kvm_vcpu *vcpu)
+{
+ return vcpu - vcpu->kvm->vcpus;
+}
+
+/*
+ * Switches to specified vcpu, until a matching vcpu_put()
+ */
+static struct kvm_vcpu *vcpu_load(struct kvm *kvm, int vcpu_slot)
+{
+ struct kvm_vcpu *vcpu = &kvm->vcpus[vcpu_slot];
+
+ mutex_lock(&vcpu->mutex);
+ if (unlikely(!vcpu->vmcs)) {
+ mutex_unlock(&vcpu->mutex);
+ return 0;
+ }
+ return kvm_arch_ops->vcpu_load(vcpu);
+}
+
+static void vcpu_put(struct kvm_vcpu *vcpu)
+{
+ kvm_arch_ops->vcpu_put(vcpu);
+ mutex_unlock(&vcpu->mutex);
+}
+
+static int kvm_dev_open(struct inode *inode, struct file *filp)
+{
+ struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL);
+ int i;
+
+ if (!kvm)
+ return -ENOMEM;
+
+ spin_lock_init(&kvm->lock);
+ INIT_LIST_HEAD(&kvm->active_mmu_pages);
+ for (i = 0; i < KVM_MAX_VCPUS; ++i) {
+ struct kvm_vcpu *vcpu = &kvm->vcpus[i];
+
+ mutex_init(&vcpu->mutex);
+ vcpu->mmu.root_hpa = INVALID_PAGE;
+ INIT_LIST_HEAD(&vcpu->free_pages);
+ }
+ filp->private_data = kvm;
+ return 0;
+}
+
+/*
+ * Free any memory in @free but not in @dont.
+ */
+static void kvm_free_physmem_slot(struct kvm_memory_slot *free,
+ struct kvm_memory_slot *dont)
+{
+ int i;
+
+ if (!dont || free->phys_mem != dont->phys_mem)
+ if (free->phys_mem) {
+ for (i = 0; i < free->npages; ++i)
+ __free_page(free->phys_mem[i]);
+ vfree(free->phys_mem);
+ }
+
+ if (!dont || free->dirty_bitmap != dont->dirty_bitmap)
+ vfree(free->dirty_bitmap);
+
+ free->phys_mem = 0;
+ free->npages = 0;
+ free->dirty_bitmap = 0;
+}
+
+static void kvm_free_physmem(struct kvm *kvm)
+{
+ int i;
+
+ for (i = 0; i < kvm->nmemslots; ++i)
+ kvm_free_physmem_slot(&kvm->memslots[i], 0);
+}
+
+static void kvm_free_vcpu(struct kvm_vcpu *vcpu)
+{
+ kvm_arch_ops->vcpu_free(vcpu);
+ kvm_mmu_destroy(vcpu);
+}
+
+static void kvm_free_vcpus(struct kvm *kvm)
+{
+ unsigned int i;
+
+ for (i = 0; i < KVM_MAX_VCPUS; ++i)
+ kvm_free_vcpu(&kvm->vcpus[i]);
+}
+
+static int kvm_dev_release(struct inode *inode, struct file *filp)
+{
+ struct kvm *kvm = filp->private_data;
+
+ kvm_free_vcpus(kvm);
+ kvm_free_physmem(kvm);
+ kfree(kvm);
+ return 0;
+}
+
+static void inject_gp(struct kvm_vcpu *vcpu)
+{
+ kvm_arch_ops->inject_gp(vcpu, 0);
+}
+
+static int pdptrs_have_reserved_bits_set(struct kvm_vcpu *vcpu,
+ unsigned long cr3)
+{
+ gfn_t pdpt_gfn = cr3 >> PAGE_SHIFT;
+ unsigned offset = (cr3 & (PAGE_SIZE-1)) >> 5;
+ int i;
+ u64 pdpte;
+ u64 *pdpt;
+ struct kvm_memory_slot *memslot;
+
+ spin_lock(&vcpu->kvm->lock);
+ memslot = gfn_to_memslot(vcpu->kvm, pdpt_gfn);
+ /* FIXME: !memslot - emulate? 0xff? */
+ pdpt = kmap_atomic(gfn_to_page(memslot, pdpt_gfn), KM_USER0);
+
+ for (i = 0; i < 4; ++i) {
+ pdpte = pdpt[offset + i];
+ if ((pdpte & 1) && (pdpte & 0xfffffff0000001e6ull))
+ break;
+ }
+
+ kunmap_atomic(pdpt, KM_USER0);
+ spin_unlock(&vcpu->kvm->lock);
+
+ return i != 4;
+}
+
+void set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
+{
+ if (cr0 & CR0_RESEVED_BITS) {
+ printk(KERN_DEBUG "set_cr0: 0x%lx #GP, reserved bits 0x%lx\n",
+ cr0, vcpu->cr0);
+ inject_gp(vcpu);
+ return;
+ }
+
+ if ((cr0 & CR0_NW_MASK) && !(cr0 & CR0_CD_MASK)) {
+ printk(KERN_DEBUG "set_cr0: #GP, CD == 0 && NW == 1\n");
+ inject_gp(vcpu);
+ return;
+ }
+
+ if ((cr0 & CR0_PG_MASK) && !(cr0 & CR0_PE_MASK)) {
+ printk(KERN_DEBUG "set_cr0: #GP, set PG flag "
+ "and a clear PE flag\n");
+ inject_gp(vcpu);
+ return;
+ }
+
+ if (!is_paging(vcpu) && (cr0 & CR0_PG_MASK)) {
+#ifdef CONFIG_X86_64
+ if ((vcpu->shadow_efer & EFER_LME)) {
+ int cs_db, cs_l;
+
+ if (!is_pae(vcpu)) {
+ printk(KERN_DEBUG "set_cr0: #GP, start paging "
+ "in long mode while PAE is disabled\n");
+ inject_gp(vcpu);
+ return;
+ }
+ kvm_arch_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
+ if (cs_l) {
+ printk(KERN_DEBUG "set_cr0: #GP, start paging "
+ "in long mode while CS.L == 1\n");
+ inject_gp(vcpu);
+ return;
+
+ }
+ } else
+#endif
+ if (is_pae(vcpu) &&
+ pdptrs_have_reserved_bits_set(vcpu, vcpu->cr3)) {
+ printk(KERN_DEBUG "set_cr0: #GP, pdptrs "
+ "reserved bits\n");
+ inject_gp(vcpu);
+ return;
+ }
+
+ }
+
+ kvm_arch_ops->set_cr0(vcpu, cr0);
+ vcpu->cr0 = cr0;
+
+ spin_lock(&vcpu->kvm->lock);
+ kvm_mmu_reset_context(vcpu);
+ spin_unlock(&vcpu->kvm->lock);
+ return;
+}
+EXPORT_SYMBOL_GPL(set_cr0);
+
+void lmsw(struct kvm_vcpu *vcpu, unsigned long msw)
+{
+ set_cr0(vcpu, (vcpu->cr0 & ~0x0ful) | (msw & 0x0f));
+}
+EXPORT_SYMBOL_GPL(lmsw);
+
+void set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+{
+ if (cr4 & CR4_RESEVED_BITS) {
+ printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
+ inject_gp(vcpu);
+ return;
+ }
+
+ if (kvm_arch_ops->is_long_mode(vcpu)) {
+ if (!(cr4 & CR4_PAE_MASK)) {
+ printk(KERN_DEBUG "set_cr4: #GP, clearing PAE while "
+ "in long mode\n");
+ inject_gp(vcpu);
+ return;
+ }
+ } else if (is_paging(vcpu) && !is_pae(vcpu) && (cr4 & CR4_PAE_MASK)
+ && pdptrs_have_reserved_bits_set(vcpu, vcpu->cr3)) {
+ printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
+ inject_gp(vcpu);
+ }
+
+ if (cr4 & CR4_VMXE_MASK) {
+ printk(KERN_DEBUG "set_cr4: #GP, setting VMXE\n");
+ inject_gp(vcpu);
+ return;
+ }
+ kvm_arch_ops->set_cr4(vcpu, cr4);
+ spin_lock(&vcpu->kvm->lock);
+ kvm_mmu_reset_context(vcpu);
+ spin_unlock(&vcpu->kvm->lock);
+}
+EXPORT_SYMBOL_GPL(set_cr4);
+
+void set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
+{
+ if (kvm_arch_ops->is_long_mode(vcpu)) {
+ if ( cr3 & CR3_L_MODE_RESEVED_BITS) {
+ printk(KERN_DEBUG "set_cr3: #GP, reserved bits\n");
+ inject_gp(vcpu);
+ return;
+ }
+ } else {
+ if (cr3 & CR3_RESEVED_BITS) {
+ printk(KERN_DEBUG "set_cr3: #GP, reserved bits\n");
+ inject_gp(vcpu);
+ return;
+ }
+ if (is_paging(vcpu) && is_pae(vcpu) &&
+ pdptrs_have_reserved_bits_set(vcpu, cr3)) {
+ printk(KERN_DEBUG "set_cr3: #GP, pdptrs "
+ "reserved bits\n");
+ inject_gp(vcpu);
+ return;
+ }
+ }
+
+ vcpu->cr3 = cr3;
+ spin_lock(&vcpu->kvm->lock);
+ vcpu->mmu.new_cr3(vcpu);
+ spin_unlock(&vcpu->kvm->lock);
+}
+EXPORT_SYMBOL_GPL(set_cr3);
+
+void set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8)
+{
+ if ( cr8 & CR8_RESEVED_BITS) {
+ printk(KERN_DEBUG "set_cr8: #GP, reserved bits 0x%lx\n", cr8);
+ inject_gp(vcpu);
+ return;
+ }
+ vcpu->cr8 = cr8;
+}
+EXPORT_SYMBOL_GPL(set_cr8);
+
+void fx_init(struct kvm_vcpu *vcpu)
+{
+ struct __attribute__ ((__packed__)) fx_image_s {
+ u16 control; //fcw
+ u16 status; //fsw
+ u16 tag; // ftw
+ u16 opcode; //fop
+ u64 ip; // fpu ip
+ u64 operand;// fpu dp
+ u32 mxcsr;
+ u32 mxcsr_mask;
+
+ } *fx_image;
+
+ fx_save(vcpu->host_fx_image);
+ fpu_init();
+ fx_save(vcpu->guest_fx_image);
+ fx_restore(vcpu->host_fx_image);
+
+ fx_image = (struct fx_image_s *)vcpu->guest_fx_image;
+ fx_image->mxcsr = 0x1f80;
+ memset(vcpu->guest_fx_image + sizeof(struct fx_image_s),
+ 0, FX_IMAGE_SIZE - sizeof(struct fx_image_s));
+}
+EXPORT_SYMBOL_GPL(fx_init);
+
+/*
+ * Creates some virtual cpus. Good luck creating more than one.
+ */
+static int kvm_dev_ioctl_create_vcpu(struct kvm *kvm, int n)
+{
+ int r;
+ struct kvm_vcpu *vcpu;
+
+ r = -EINVAL;
+ if (n < 0 || n >= KVM_MAX_VCPUS)
+ goto out;
+
+ vcpu = &kvm->vcpus[n];
+
+ mutex_lock(&vcpu->mutex);
+
+ if (vcpu->vmcs) {
+ mutex_unlock(&vcpu->mutex);
+ return -EEXIST;
+ }
+
+ vcpu->host_fx_image = (char*)ALIGN((hva_t)vcpu->fx_buf,
+ FX_IMAGE_ALIGN);
+ vcpu->guest_fx_image = vcpu->host_fx_image + FX_IMAGE_SIZE;
+
+ vcpu->cpu = -1; /* First load will set up TR */
+ vcpu->kvm = kvm;
+ r = kvm_arch_ops->vcpu_create(vcpu);
+ if (r < 0)
+ goto out_free_vcpus;
+
+ kvm_arch_ops->vcpu_load(vcpu);
+
+ r = kvm_arch_ops->vcpu_setup(vcpu);
+ if (r >= 0)
+ r = kvm_mmu_init(vcpu);
+
+ vcpu_put(vcpu);
+
+ if (r < 0)
+ goto out_free_vcpus;
+
+ return 0;
+
+out_free_vcpus:
+ kvm_free_vcpu(vcpu);
+ mutex_unlock(&vcpu->mutex);
+out:
+ return r;
+}
+
+/*
+ * Allocate some memory and give it an address in the guest physical address
+ * space.
+ *
+ * Discontiguous memory is allowed, mostly for framebuffers.
+ */
+static int kvm_dev_ioctl_set_memory_region(struct kvm *kvm,
+ struct kvm_memory_region *mem)
+{
+ int r;
+ gfn_t base_gfn;
+ unsigned long npages;
+ unsigned long i;
+ struct kvm_memory_slot *memslot;
+ struct kvm_memory_slot old, new;
+ int memory_config_version;
+
+ r = -EINVAL;
+ /* General sanity checks */
+ if (mem->memory_size & (PAGE_SIZE - 1))
+ goto out;
+ if (mem->guest_phys_addr & (PAGE_SIZE - 1))
+ goto out;
+ if (mem->slot >= KVM_MEMORY_SLOTS)
+ goto out;
+ if (mem->guest_phys_addr + mem->memory_size < mem->guest_phys_addr)
+ goto out;
+
+ memslot = &kvm->memslots[mem->slot];
+ base_gfn = mem->guest_phys_addr >> PAGE_SHIFT;
+ npages = mem->memory_size >> PAGE_SHIFT;
+
+ if (!npages)
+ mem->flags &= ~KVM_MEM_LOG_DIRTY_PAGES;
+
+raced:
+ spin_lock(&kvm->lock);
+
+ memory_config_version = kvm->memory_config_version;
+ new = old = *memslot;
+
+ new.base_gfn = base_gfn;
+ new.npages = npages;
+ new.flags = mem->flags;
+
+ /* Disallow changing a memory slot's size. */
+ r = -EINVAL;
+ if (npages && old.npages && npages != old.npages)
+ goto out_unlock;
+
+ /* Check for overlaps */
+ r = -EEXIST;
+ for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
+ struct kvm_memory_slot *s = &kvm->memslots[i];
+
+ if (s == memslot)
+ continue;
+ if (!((base_gfn + npages <= s->base_gfn) ||
+ (base_gfn >= s->base_gfn + s->npages)))
+ goto out_unlock;
+ }
+ /*
+ * Do memory allocations outside lock. memory_config_version will
+ * detect any races.
+ */
+ spin_unlock(&kvm->lock);
+
+ /* Deallocate if slot is being removed */
+ if (!npages)
+ new.phys_mem = 0;
+
+ /* Free page dirty bitmap if unneeded */
+ if (!(new.flags & KVM_MEM_LOG_DIRTY_PAGES))
+ new.dirty_bitmap = 0;
+
+ r = -ENOMEM;
+
+ /* Allocate if a slot is being created */
+ if (npages && !new.phys_mem) {
+ new.phys_mem = vmalloc(npages * sizeof(struct page *));
+
+ if (!new.phys_mem)
+ goto out_free;
+
+ memset(new.phys_mem, 0, npages * sizeof(struct page *));
+ for (i = 0; i < npages; ++i) {
+ new.phys_mem[i] = alloc_page(GFP_HIGHUSER
+ | __GFP_ZERO);
+ if (!new.phys_mem[i])
+ goto out_free;
+ }
+ }
+
+ /* Allocate page dirty bitmap if needed */
+ if ((new.flags & KVM_MEM_LOG_DIRTY_PAGES) && !new.dirty_bitmap) {
+ unsigned dirty_bytes = ALIGN(npages, BITS_PER_LONG) / 8;
+
+ new.dirty_bitmap = vmalloc(dirty_bytes);
+ if (!new.dirty_bitmap)
+ goto out_free;
+ memset(new.dirty_bitmap, 0, dirty_bytes);
+ }
+
+ spin_lock(&kvm->lock);
+
+ if (memory_config_version != kvm->memory_config_version) {
+ spin_unlock(&kvm->lock);
+ kvm_free_physmem_slot(&new, &old);
+ goto raced;
+ }
+
+ r = -EAGAIN;
+ if (kvm->busy)
+ goto out_unlock;
+
+ if (mem->slot >= kvm->nmemslots)
+ kvm->nmemslots = mem->slot + 1;
+
+ *memslot = new;
+ ++kvm->memory_config_version;
+
+ spin_unlock(&kvm->lock);
+
+ for (i = 0; i < KVM_MAX_VCPUS; ++i) {
+ struct kvm_vcpu *vcpu;
+
+ vcpu = vcpu_load(kvm, i);
+ if (!vcpu)
+ continue;
+ kvm_mmu_reset_context(vcpu);
+ vcpu_put(vcpu);
+ }
+
+ kvm_free_physmem_slot(&old, &new);
+ return 0;
+
+out_unlock:
+ spin_unlock(&kvm->lock);
+out_free:
+ kvm_free_physmem_slot(&new, &old);
+out:
+ return r;
+}
+
+/*
+ * Get (and clear) the dirty memory log for a memory slot.
+ */
+static int kvm_dev_ioctl_get_dirty_log(struct kvm *kvm,
+ struct kvm_dirty_log *log)
+{
+ struct kvm_memory_slot *memslot;
+ int r, i;
+ int n;
+ unsigned long any = 0;
+
+ spin_lock(&kvm->lock);
+
+ /*
+ * Prevent changes to guest memory configuration even while the lock
+ * is not taken.
+ */
+ ++kvm->busy;
+ spin_unlock(&kvm->lock);
+ r = -EINVAL;
+ if (log->slot >= KVM_MEMORY_SLOTS)
+ goto out;
+
+ memslot = &kvm->memslots[log->slot];
+ r = -ENOENT;
+ if (!memslot->dirty_bitmap)
+ goto out;
+
+ n = ALIGN(memslot->npages, 8) / 8;
+
+ for (i = 0; !any && i < n; ++i)
+ any = memslot->dirty_bitmap[i];
+
+ r = -EFAULT;
+ if (copy_to_user(log->dirty_bitmap, memslot->dirty_bitmap, n))
+ goto out;
+
+
+ if (any) {
+ spin_lock(&kvm->lock);
+ kvm_mmu_slot_remove_write_access(kvm, log->slot);
+ spin_unlock(&kvm->lock);
+ memset(memslot->dirty_bitmap, 0, n);
+ for (i = 0; i < KVM_MAX_VCPUS; ++i) {
+ struct kvm_vcpu *vcpu = vcpu_load(kvm, i);
+
+ if (!vcpu)
+ continue;
+ kvm_arch_ops->tlb_flush(vcpu);
+ vcpu_put(vcpu);
+ }
+ }
+
+ r = 0;
+
+out:
+ spin_lock(&kvm->lock);
+ --kvm->busy;
+ spin_unlock(&kvm->lock);
+ return r;
+}
+
+struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn)
+{
+ int i;
+
+ for (i = 0; i < kvm->nmemslots; ++i) {
+ struct kvm_memory_slot *memslot = &kvm->memslots[i];
+
+ if (gfn >= memslot->base_gfn
+ && gfn < memslot->base_gfn + memslot->npages)
+ return memslot;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gfn_to_memslot);
+
+void mark_page_dirty(struct kvm *kvm, gfn_t gfn)
+{
+ int i;
+ struct kvm_memory_slot *memslot = 0;
+ unsigned long rel_gfn;
+
+ for (i = 0; i < kvm->nmemslots; ++i) {
+ memslot = &kvm->memslots[i];
+
+ if (gfn >= memslot->base_gfn
+ && gfn < memslot->base_gfn + memslot->npages) {
+
+ if (!memslot || !memslot->dirty_bitmap)
+ return;
+
+ rel_gfn = gfn - memslot->base_gfn;
+
+ /* avoid RMW */
+ if (!test_bit(rel_gfn, memslot->dirty_bitmap))
+ set_bit(rel_gfn, memslot->dirty_bitmap);
+ return;
+ }
+ }
+}
+
+static int emulator_read_std(unsigned long addr,
+ unsigned long *val,
+ unsigned int bytes,
+ struct x86_emulate_ctxt *ctxt)
+{
+ struct kvm_vcpu *vcpu = ctxt->vcpu;
+ void *data = val;
+
+ while (bytes) {
+ gpa_t gpa = vcpu->mmu.gva_to_gpa(vcpu, addr);
+ unsigned offset = addr & (PAGE_SIZE-1);
+ unsigned tocopy = min(bytes, (unsigned)PAGE_SIZE - offset);
+ unsigned long pfn;
+ struct kvm_memory_slot *memslot;
+ void *page;
+
+ if (gpa == UNMAPPED_GVA)
+ return X86EMUL_PROPAGATE_FAULT;
+ pfn = gpa >> PAGE_SHIFT;
+ memslot = gfn_to_memslot(vcpu->kvm, pfn);
+ if (!memslot)
+ return X86EMUL_UNHANDLEABLE;
+ page = kmap_atomic(gfn_to_page(memslot, pfn), KM_USER0);
+
+ memcpy(data, page + offset, tocopy);
+
+ kunmap_atomic(page, KM_USER0);
+
+ bytes -= tocopy;
+ data += tocopy;
+ addr += tocopy;
+ }
+
+ return X86EMUL_CONTINUE;
+}
+
+static int emulator_write_std(unsigned long addr,
+ unsigned long val,
+ unsigned int bytes,
+ struct x86_emulate_ctxt *ctxt)
+{
+ printk(KERN_ERR "emulator_write_std: addr %lx n %d\n",
+ addr, bytes);
+ return X86EMUL_UNHANDLEABLE;
+}
+
+static int emulator_read_emulated(unsigned long addr,
+ unsigned long *val,
+ unsigned int bytes,
+ struct x86_emulate_ctxt *ctxt)
+{
+ struct kvm_vcpu *vcpu = ctxt->vcpu;
+
+ if (vcpu->mmio_read_completed) {
+ memcpy(val, vcpu->mmio_data, bytes);
+ vcpu->mmio_read_completed = 0;
+ return X86EMUL_CONTINUE;
+ } else if (emulator_read_std(addr, val, bytes, ctxt)
+ == X86EMUL_CONTINUE)
+ return X86EMUL_CONTINUE;
+ else {
+ gpa_t gpa = vcpu->mmu.gva_to_gpa(vcpu, addr);
+ if (gpa == UNMAPPED_GVA)
+ return vcpu_printf(vcpu, "not present\n"), X86EMUL_PROPAGATE_FAULT;
+ vcpu->mmio_needed = 1;
+ vcpu->mmio_phys_addr = gpa;
+ vcpu->mmio_size = bytes;
+ vcpu->mmio_is_write = 0;
+
+ return X86EMUL_UNHANDLEABLE;
+ }
+}
+
+static int emulator_write_emulated(unsigned long addr,
+ unsigned long val,
+ unsigned int bytes,
+ struct x86_emulate_ctxt *ctxt)
+{
+ struct kvm_vcpu *vcpu = ctxt->vcpu;
+ gpa_t gpa = vcpu->mmu.gva_to_gpa(vcpu, addr);
+
+ if (gpa == UNMAPPED_GVA)
+ return X86EMUL_PROPAGATE_FAULT;
+
+ vcpu->mmio_needed = 1;
+ vcpu->mmio_phys_addr = gpa;
+ vcpu->mmio_size = bytes;
+ vcpu->mmio_is_write = 1;
+ memcpy(vcpu->mmio_data, &val, bytes);
+
+ return X86EMUL_CONTINUE;
+}
+
+static int emulator_cmpxchg_emulated(unsigned long addr,
+ unsigned long old,
+ unsigned long new,
+ unsigned int bytes,
+ struct x86_emulate_ctxt *ctxt)
+{
+ static int reported;
+
+ if (!reported) {
+ reported = 1;
+ printk(KERN_WARNING "kvm: emulating exchange as write\n");
+ }
+ return emulator_write_emulated(addr, new, bytes, ctxt);
+}
+
+static unsigned long get_segment_base(struct kvm_vcpu *vcpu, int seg)
+{
+ return kvm_arch_ops->get_segment_base(vcpu, seg);
+}
+
+int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
+{
+ spin_lock(&vcpu->kvm->lock);
+ vcpu->mmu.inval_page(vcpu, address);
+ spin_unlock(&vcpu->kvm->lock);
+ kvm_arch_ops->invlpg(vcpu, address);
+ return X86EMUL_CONTINUE;
+}
+
+int emulate_clts(struct kvm_vcpu *vcpu)
+{
+ unsigned long cr0 = vcpu->cr0;
+
+ cr0 &= ~CR0_TS_MASK;
+ kvm_arch_ops->set_cr0(vcpu, cr0);
+ return X86EMUL_CONTINUE;
+}
+
+int emulator_get_dr(struct x86_emulate_ctxt* ctxt, int dr, unsigned long *dest)
+{
+ struct kvm_vcpu *vcpu = ctxt->vcpu;
+
+ switch (dr) {
+ case 0 ... 3:
+ *dest = kvm_arch_ops->get_dr(vcpu, dr);
+ return X86EMUL_CONTINUE;
+ default:
+ printk(KERN_DEBUG "%s: unexpected dr %u\n",
+ __FUNCTION__, dr);
+ return X86EMUL_UNHANDLEABLE;
+ }
+}
+
+int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long value)
+{
+ unsigned long mask = (ctxt->mode == X86EMUL_MODE_PROT64) ? ~0ULL : ~0U;
+ int exception;
+
+ kvm_arch_ops->set_dr(ctxt->vcpu, dr, value & mask, &exception);
+ if (exception) {
+ /* FIXME: better handling */
+ return X86EMUL_UNHANDLEABLE;
+ }
+ return X86EMUL_CONTINUE;
+}
+
+static void report_emulation_failure(struct x86_emulate_ctxt *ctxt)
+{
+ static int reported;
+ u8 opcodes[4];
+ unsigned long rip = ctxt->vcpu->rip;
+ unsigned long rip_linear;
+
+ rip_linear = rip + get_segment_base(ctxt->vcpu, VCPU_SREG_CS);
+
+ if (reported)
+ return;
+
+ emulator_read_std(rip_linear, (void *)opcodes, 4, ctxt);
+
+ printk(KERN_ERR "emulation failed but !mmio_needed?"
+ " rip %lx %02x %02x %02x %02x\n",
+ rip, opcodes[0], opcodes[1], opcodes[2], opcodes[3]);
+ reported = 1;
+}
+
+struct x86_emulate_ops emulate_ops = {
+ .read_std = emulator_read_std,
+ .write_std = emulator_write_std,
+ .read_emulated = emulator_read_emulated,
+ .write_emulated = emulator_write_emulated,
+ .cmpxchg_emulated = emulator_cmpxchg_emulated,
+};
+
+int emulate_instruction(struct kvm_vcpu *vcpu,
+ struct kvm_run *run,
+ unsigned long cr2,
+ u16 error_code)
+{
+ struct x86_emulate_ctxt emulate_ctxt;
+ int r;
+ int cs_db, cs_l;
+
+ kvm_arch_ops->cache_regs(vcpu);
+
+ kvm_arch_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
+
+ emulate_ctxt.vcpu = vcpu;
+ emulate_ctxt.eflags = kvm_arch_ops->get_rflags(vcpu);
+ emulate_ctxt.cr2 = cr2;
+ emulate_ctxt.mode = (emulate_ctxt.eflags & X86_EFLAGS_VM)
+ ? X86EMUL_MODE_REAL : cs_l
+ ? X86EMUL_MODE_PROT64 : cs_db
+ ? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
+
+ if (emulate_ctxt.mode == X86EMUL_MODE_PROT64) {
+ emulate_ctxt.cs_base = 0;
+ emulate_ctxt.ds_base = 0;
+ emulate_ctxt.es_base = 0;
+ emulate_ctxt.ss_base = 0;
+ } else {
+ emulate_ctxt.cs_base = get_segment_base(vcpu, VCPU_SREG_CS);
+ emulate_ctxt.ds_base = get_segment_base(vcpu, VCPU_SREG_DS);
+ emulate_ctxt.es_base = get_segment_base(vcpu, VCPU_SREG_ES);
+ emulate_ctxt.ss_base = get_segment_base(vcpu, VCPU_SREG_SS);
+ }
+
+ emulate_ctxt.gs_base = get_segment_base(vcpu, VCPU_SREG_GS);
+ emulate_ctxt.fs_base = get_segment_base(vcpu, VCPU_SREG_FS);
+
+ vcpu->mmio_is_write = 0;
+ r = x86_emulate_memop(&emulate_ctxt, &emulate_ops);
+
+ if ((r || vcpu->mmio_is_write) && run) {
+ run->mmio.phys_addr = vcpu->mmio_phys_addr;
+ memcpy(run->mmio.data, vcpu->mmio_data, 8);
+ run->mmio.len = vcpu->mmio_size;
+ run->mmio.is_write = vcpu->mmio_is_write;
+ }
+
+ if (r) {
+ if (!vcpu->mmio_needed) {
+ report_emulation_failure(&emulate_ctxt);
+ return EMULATE_FAIL;
+ }
+ return EMULATE_DO_MMIO;
+ }
+
+ kvm_arch_ops->decache_regs(vcpu);
+ kvm_arch_ops->set_rflags(vcpu, emulate_ctxt.eflags);
+
+ if (vcpu->mmio_is_write)
+ return EMULATE_DO_MMIO;
+
+ return EMULATE_DONE;
+}
+EXPORT_SYMBOL_GPL(emulate_instruction);
+
+static u64 mk_cr_64(u64 curr_cr, u32 new_val)
+{
+ return (curr_cr & ~((1ULL << 32) - 1)) | new_val;
+}
+
+void realmode_lgdt(struct kvm_vcpu *vcpu, u16 limit, unsigned long base)
+{
+ struct descriptor_table dt = { limit, base };
+
+ kvm_arch_ops->set_gdt(vcpu, &dt);
+}
+
+void realmode_lidt(struct kvm_vcpu *vcpu, u16 limit, unsigned long base)
+{
+ struct descriptor_table dt = { limit, base };
+
+ kvm_arch_ops->set_idt(vcpu, &dt);
+}
+
+void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
+ unsigned long *rflags)
+{
+ lmsw(vcpu, msw);
+ *rflags = kvm_arch_ops->get_rflags(vcpu);
+}
+
+unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
+{
+ switch (cr) {
+ case 0:
+ return vcpu->cr0;
+ case 2:
+ return vcpu->cr2;
+ case 3:
+ return vcpu->cr3;
+ case 4:
+ return vcpu->cr4;
+ default:
+ vcpu_printf(vcpu, "%s: unexpected cr %u\n", __FUNCTION__, cr);
+ return 0;
+ }
+}
+
+void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
+ unsigned long *rflags)
+{
+ switch (cr) {
+ case 0:
+ set_cr0(vcpu, mk_cr_64(vcpu->cr0, val));
+ *rflags = kvm_arch_ops->get_rflags(vcpu);
+ break;
+ case 2:
+ vcpu->cr2 = val;
+ break;
+ case 3:
+ set_cr3(vcpu, val);
+ break;
+ case 4:
+ set_cr4(vcpu, mk_cr_64(vcpu->cr4, val));
+ break;
+ default:
+ vcpu_printf(vcpu, "%s: unexpected cr %u\n", __FUNCTION__, cr);
+ }
+}
+
+/*
+ * Reads an msr value (of 'msr_index') into 'pdata'.
+ * Returns 0 on success, non-0 otherwise.
+ * Assumes vcpu_load() was already called.
+ */
+static int get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
+{
+ return kvm_arch_ops->get_msr(vcpu, msr_index, pdata);
+}
+
+#ifdef CONFIG_X86_64
+
+void set_efer(struct kvm_vcpu *vcpu, u64 efer)
+{
+ if (efer & EFER_RESERVED_BITS) {
+ printk(KERN_DEBUG "set_efer: 0x%llx #GP, reserved bits\n",
+ efer);
+ inject_gp(vcpu);
+ return;
+ }
+
+ if (is_paging(vcpu)
+ && (vcpu->shadow_efer & EFER_LME) != (efer & EFER_LME)) {
+ printk(KERN_DEBUG "set_efer: #GP, change LME while paging\n");
+ inject_gp(vcpu);
+ return;
+ }
+
+ kvm_arch_ops->set_efer(vcpu, efer);
+
+ efer &= ~EFER_LMA;
+ efer |= vcpu->shadow_efer & EFER_LMA;
+
+ vcpu->shadow_efer = efer;
+}
+EXPORT_SYMBOL_GPL(set_efer);
+
+#endif
+
+/*
+ * Writes msr value into into the appropriate "register".
+ * Returns 0 on success, non-0 otherwise.
+ * Assumes vcpu_load() was already called.
+ */
+static int set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
+{
+ return kvm_arch_ops->set_msr(vcpu, msr_index, data);
+}
+
+void kvm_resched(struct kvm_vcpu *vcpu)
+{
+ vcpu_put(vcpu);
+ cond_resched();
+ /* Cannot fail - no vcpu unplug yet. */
+ vcpu_load(vcpu->kvm, vcpu_slot(vcpu));
+}
+EXPORT_SYMBOL_GPL(kvm_resched);
+
+void load_msrs(struct vmx_msr_entry *e, int n)
+{
+ int i;
+
+ for (i = 0; i < n; ++i)
+ wrmsrl(e[i].index, e[i].data);
+}
+EXPORT_SYMBOL_GPL(load_msrs);
+
+void save_msrs(struct vmx_msr_entry *e, int n)
+{
+ int i;
+
+ for (i = 0; i < n; ++i)
+ rdmsrl(e[i].index, e[i].data);
+}
+EXPORT_SYMBOL_GPL(save_msrs);
+
+static int kvm_dev_ioctl_run(struct kvm *kvm, struct kvm_run *kvm_run)
+{
+ struct kvm_vcpu *vcpu;
+ int r;
+
+ if (kvm_run->vcpu < 0 || kvm_run->vcpu >= KVM_MAX_VCPUS)
+ return -EINVAL;
+
+ vcpu = vcpu_load(kvm, kvm_run->vcpu);
+ if (!vcpu)
+ return -ENOENT;
+
+ if (kvm_run->emulated) {
+ kvm_arch_ops->skip_emulated_instruction(vcpu);
+ kvm_run->emulated = 0;
+ }
+
+ if (kvm_run->mmio_completed) {
+ memcpy(vcpu->mmio_data, kvm_run->mmio.data, 8);
+ vcpu->mmio_read_completed = 1;
+ }
+
+ vcpu->mmio_needed = 0;
+
+ r = kvm_arch_ops->run(vcpu, kvm_run);
+
+ vcpu_put(vcpu);
+ return r;
+}
+
+static int kvm_dev_ioctl_get_regs(struct kvm *kvm, struct kvm_regs *regs)
+{
+ struct kvm_vcpu *vcpu;
+
+ if (regs->vcpu < 0 || regs->vcpu >= KVM_MAX_VCPUS)
+ return -EINVAL;
+
+ vcpu = vcpu_load(kvm, regs->vcpu);
+ if (!vcpu)
+ return -ENOENT;
+
+ kvm_arch_ops->cache_regs(vcpu);
+
+ regs->rax = vcpu->regs[VCPU_REGS_RAX];
+ regs->rbx = vcpu->regs[VCPU_REGS_RBX];
+ regs->rcx = vcpu->regs[VCPU_REGS_RCX];
+ regs->rdx = vcpu->regs[VCPU_REGS_RDX];
+ regs->rsi = vcpu->regs[VCPU_REGS_RSI];
+ regs->rdi = vcpu->regs[VCPU_REGS_RDI];
+ regs->rsp = vcpu->regs[VCPU_REGS_RSP];
+ regs->rbp = vcpu->regs[VCPU_REGS_RBP];
+#ifdef CONFIG_X86_64
+ regs->r8 = vcpu->regs[VCPU_REGS_R8];
+ regs->r9 = vcpu->regs[VCPU_REGS_R9];
+ regs->r10 = vcpu->regs[VCPU_REGS_R10];
+ regs->r11 = vcpu->regs[VCPU_REGS_R11];
+ regs->r12 = vcpu->regs[VCPU_REGS_R12];
+ regs->r13 = vcpu->regs[VCPU_REGS_R13];
+ regs->r14 = vcpu->regs[VCPU_REGS_R14];
+ regs->r15 = vcpu->regs[VCPU_REGS_R15];
+#endif
+
+ regs->rip = vcpu->rip;
+ regs->rflags = kvm_arch_ops->get_rflags(vcpu);
+
+ /*
+ * Don't leak debug flags in case they were set for guest debugging
+ */
+ if (vcpu->guest_debug.enabled && vcpu->guest_debug.singlestep)
+ regs->rflags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
+
+ vcpu_put(vcpu);
+
+ return 0;
+}
+
+static int kvm_dev_ioctl_set_regs(struct kvm *kvm, struct kvm_regs *regs)
+{
+ struct kvm_vcpu *vcpu;
+
+ if (regs->vcpu < 0 || regs->vcpu >= KVM_MAX_VCPUS)
+ return -EINVAL;
+
+ vcpu = vcpu_load(kvm, regs->vcpu);
+ if (!vcpu)
+ return -ENOENT;
+
+ vcpu->regs[VCPU_REGS_RAX] = regs->rax;
+ vcpu->regs[VCPU_REGS_RBX] = regs->rbx;
+ vcpu->regs[VCPU_REGS_RCX] = regs->rcx;
+ vcpu->regs[VCPU_REGS_RDX] = regs->rdx;
+ vcpu->regs[VCPU_REGS_RSI] = regs->rsi;
+ vcpu->regs[VCPU_REGS_RDI] = regs->rdi;
+ vcpu->regs[VCPU_REGS_RSP] = regs->rsp;
+ vcpu->regs[VCPU_REGS_RBP] = regs->rbp;
+#ifdef CONFIG_X86_64
+ vcpu->regs[VCPU_REGS_R8] = regs->r8;
+ vcpu->regs[VCPU_REGS_R9] = regs->r9;
+ vcpu->regs[VCPU_REGS_R10] = regs->r10;
+ vcpu->regs[VCPU_REGS_R11] = regs->r11;
+ vcpu->regs[VCPU_REGS_R12] = regs->r12;
+ vcpu->regs[VCPU_REGS_R13] = regs->r13;
+ vcpu->regs[VCPU_REGS_R14] = regs->r14;
+ vcpu->regs[VCPU_REGS_R15] = regs->r15;
+#endif
+
+ vcpu->rip = regs->rip;
+ kvm_arch_ops->set_rflags(vcpu, regs->rflags);
+
+ kvm_arch_ops->decache_regs(vcpu);
+
+ vcpu_put(vcpu);
+
+ return 0;
+}
+
+static void get_segment(struct kvm_vcpu *vcpu,
+ struct kvm_segment *var, int seg)
+{
+ return kvm_arch_ops->get_segment(vcpu, var, seg);
+}
+
+static int kvm_dev_ioctl_get_sregs(struct kvm *kvm, struct kvm_sregs *sregs)
+{
+ struct kvm_vcpu *vcpu;
+ struct descriptor_table dt;
+
+ if (sregs->vcpu < 0 || sregs->vcpu >= KVM_MAX_VCPUS)
+ return -EINVAL;
+ vcpu = vcpu_load(kvm, sregs->vcpu);
+ if (!vcpu)
+ return -ENOENT;
+
+ get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+ get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+ get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+ get_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+ get_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+ get_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+
+ get_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+ get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+
+ kvm_arch_ops->get_idt(vcpu, &dt);
+ sregs->idt.limit = dt.limit;
+ sregs->idt.base = dt.base;
+ kvm_arch_ops->get_gdt(vcpu, &dt);
+ sregs->gdt.limit = dt.limit;
+ sregs->gdt.base = dt.base;
+
+ sregs->cr0 = vcpu->cr0;
+ sregs->cr2 = vcpu->cr2;
+ sregs->cr3 = vcpu->cr3;
+ sregs->cr4 = vcpu->cr4;
+ sregs->cr8 = vcpu->cr8;
+ sregs->efer = vcpu->shadow_efer;
+ sregs->apic_base = vcpu->apic_base;
+
+ memcpy(sregs->interrupt_bitmap, vcpu->irq_pending,
+ sizeof sregs->interrupt_bitmap);
+
+ vcpu_put(vcpu);
+
+ return 0;
+}
+
+static void set_segment(struct kvm_vcpu *vcpu,
+ struct kvm_segment *var, int seg)
+{
+ return kvm_arch_ops->set_segment(vcpu, var, seg);
+}
+
+static int kvm_dev_ioctl_set_sregs(struct kvm *kvm, struct kvm_sregs *sregs)
+{
+ struct kvm_vcpu *vcpu;
+ int mmu_reset_needed = 0;
+ int i;
+ struct descriptor_table dt;
+
+ if (sregs->vcpu < 0 || sregs->vcpu >= KVM_MAX_VCPUS)
+ return -EINVAL;
+ vcpu = vcpu_load(kvm, sregs->vcpu);
+ if (!vcpu)
+ return -ENOENT;
+
+ set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+ set_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+ set_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+ set_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+ set_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+ set_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+
+ set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+ set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+
+ dt.limit = sregs->idt.limit;
+ dt.base = sregs->idt.base;
+ kvm_arch_ops->set_idt(vcpu, &dt);
+ dt.limit = sregs->gdt.limit;
+ dt.base = sregs->gdt.base;
+ kvm_arch_ops->set_gdt(vcpu, &dt);
+
+ vcpu->cr2 = sregs->cr2;
+ mmu_reset_needed |= vcpu->cr3 != sregs->cr3;
+ vcpu->cr3 = sregs->cr3;
+
+ vcpu->cr8 = sregs->cr8;
+
+ mmu_reset_needed |= vcpu->shadow_efer != sregs->efer;
+#ifdef CONFIG_X86_64
+ kvm_arch_ops->set_efer(vcpu, sregs->efer);
+#endif
+ vcpu->apic_base = sregs->apic_base;
+
+ mmu_reset_needed |= vcpu->cr0 != sregs->cr0;
+ kvm_arch_ops->set_cr0_no_modeswitch(vcpu, sregs->cr0);
+
+ mmu_reset_needed |= vcpu->cr4 != sregs->cr4;
+ kvm_arch_ops->set_cr4(vcpu, sregs->cr4);
+
+ if (mmu_reset_needed)
+ kvm_mmu_reset_context(vcpu);
+
+ memcpy(vcpu->irq_pending, sregs->interrupt_bitmap,
+ sizeof vcpu->irq_pending);
+ vcpu->irq_summary = 0;
+ for (i = 0; i < NR_IRQ_WORDS; ++i)
+ if (vcpu->irq_pending[i])
+ __set_bit(i, &vcpu->irq_summary);
+
+ vcpu_put(vcpu);
+
+ return 0;
+}
+
+/*
+ * List of msr numbers which we expose to userspace through KVM_GET_MSRS
+ * and KVM_SET_MSRS, and KVM_GET_MSR_INDEX_LIST.
+ */
+static u32 msrs_to_save[] = {
+ MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
+ MSR_K6_STAR,
+#ifdef CONFIG_X86_64
+ MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
+#endif
+ MSR_IA32_TIME_STAMP_COUNTER,
+};
+
+
+/*
+ * Adapt set_msr() to msr_io()'s calling convention
+ */
+static int do_set_msr(struct kvm_vcpu *vcpu, unsigned index, u64 *data)
+{
+ return set_msr(vcpu, index, *data);
+}
+
+/*
+ * Read or write a bunch of msrs. All parameters are kernel addresses.
+ *
+ * @return number of msrs set successfully.
+ */
+static int __msr_io(struct kvm *kvm, struct kvm_msrs *msrs,
+ struct kvm_msr_entry *entries,
+ int (*do_msr)(struct kvm_vcpu *vcpu,
+ unsigned index, u64 *data))
+{
+ struct kvm_vcpu *vcpu;
+ int i;
+
+ if (msrs->vcpu < 0 || msrs->vcpu >= KVM_MAX_VCPUS)
+ return -EINVAL;
+
+ vcpu = vcpu_load(kvm, msrs->vcpu);
+ if (!vcpu)
+ return -ENOENT;
+
+ for (i = 0; i < msrs->nmsrs; ++i)
+ if (do_msr(vcpu, entries[i].index, &entries[i].data))
+ break;
+
+ vcpu_put(vcpu);
+
+ return i;
+}
+
+/*
+ * Read or write a bunch of msrs. Parameters are user addresses.
+ *
+ * @return number of msrs set successfully.
+ */
+static int msr_io(struct kvm *kvm, struct kvm_msrs __user *user_msrs,
+ int (*do_msr)(struct kvm_vcpu *vcpu,
+ unsigned index, u64 *data),
+ int writeback)
+{
+ struct kvm_msrs msrs;
+ struct kvm_msr_entry *entries;
+ int r, n;
+ unsigned size;
+
+ r = -EFAULT;
+ if (copy_from_user(&msrs, user_msrs, sizeof msrs))
+ goto out;
+
+ r = -E2BIG;
+ if (msrs.nmsrs >= MAX_IO_MSRS)
+ goto out;
+
+ r = -ENOMEM;
+ size = sizeof(struct kvm_msr_entry) * msrs.nmsrs;
+ entries = vmalloc(size);
+ if (!entries)
+ goto out;
+
+ r = -EFAULT;
+ if (copy_from_user(entries, user_msrs->entries, size))
+ goto out_free;
+
+ r = n = __msr_io(kvm, &msrs, entries, do_msr);
+ if (r < 0)
+ goto out_free;
+
+ r = -EFAULT;
+ if (writeback && copy_to_user(user_msrs->entries, entries, size))
+ goto out_free;
+
+ r = n;
+
+out_free:
+ vfree(entries);
+out:
+ return r;
+}
+
+/*
+ * Translate a guest virtual address to a guest physical address.
+ */
+static int kvm_dev_ioctl_translate(struct kvm *kvm, struct kvm_translation *tr)
+{
+ unsigned long vaddr = tr->linear_address;
+ struct kvm_vcpu *vcpu;
+ gpa_t gpa;
+
+ vcpu = vcpu_load(kvm, tr->vcpu);
+ if (!vcpu)
+ return -ENOENT;
+ spin_lock(&kvm->lock);
+ gpa = vcpu->mmu.gva_to_gpa(vcpu, vaddr);
+ tr->physical_address = gpa;
+ tr->valid = gpa != UNMAPPED_GVA;
+ tr->writeable = 1;
+ tr->usermode = 0;
+ spin_unlock(&kvm->lock);
+ vcpu_put(vcpu);
+
+ return 0;
+}
+
+static int kvm_dev_ioctl_interrupt(struct kvm *kvm, struct kvm_interrupt *irq)
+{
+ struct kvm_vcpu *vcpu;
+
+ if (irq->vcpu < 0 || irq->vcpu >= KVM_MAX_VCPUS)
+ return -EINVAL;
+ if (irq->irq < 0 || irq->irq >= 256)
+ return -EINVAL;
+ vcpu = vcpu_load(kvm, irq->vcpu);
+ if (!vcpu)
+ return -ENOENT;
+
+ set_bit(irq->irq, vcpu->irq_pending);
+ set_bit(irq->irq / BITS_PER_LONG, &vcpu->irq_summary);
+
+ vcpu_put(vcpu);
+
+ return 0;
+}
+
+static int kvm_dev_ioctl_debug_guest(struct kvm *kvm,
+ struct kvm_debug_guest *dbg)
+{
+ struct kvm_vcpu *vcpu;
+ int r;
+
+ if (dbg->vcpu < 0 || dbg->vcpu >= KVM_MAX_VCPUS)
+ return -EINVAL;
+ vcpu = vcpu_load(kvm, dbg->vcpu);
+ if (!vcpu)
+ return -ENOENT;
+
+ r = kvm_arch_ops->set_guest_debug(vcpu, dbg);
+
+ vcpu_put(vcpu);
+
+ return r;
+}
+
+static long kvm_dev_ioctl(struct file *filp,
+ unsigned int ioctl, unsigned long arg)
+{
+ struct kvm *kvm = filp->private_data;
+ int r = -EINVAL;
+
+ switch (ioctl) {
+ case KVM_CREATE_VCPU: {
+ r = kvm_dev_ioctl_create_vcpu(kvm, arg);
+ if (r)
+ goto out;
+ break;
+ }
+ case KVM_RUN: {
+ struct kvm_run kvm_run;
+
+ r = -EFAULT;
+ if (copy_from_user(&kvm_run, (void *)arg, sizeof kvm_run))
+ goto out;
+ r = kvm_dev_ioctl_run(kvm, &kvm_run);
+ if (r < 0)
+ goto out;
+ r = -EFAULT;
+ if (copy_to_user((void *)arg, &kvm_run, sizeof kvm_run))
+ goto out;
+ r = 0;
+ break;
+ }
+ case KVM_GET_REGS: {
+ struct kvm_regs kvm_regs;
+
+ r = -EFAULT;
+ if (copy_from_user(&kvm_regs, (void *)arg, sizeof kvm_regs))
+ goto out;
+ r = kvm_dev_ioctl_get_regs(kvm, &kvm_regs);
+ if (r)
+ goto out;
+ r = -EFAULT;
+ if (copy_to_user((void *)arg, &kvm_regs, sizeof kvm_regs))
+ goto out;
+ r = 0;
+ break;
+ }
+ case KVM_SET_REGS: {
+ struct kvm_regs kvm_regs;
+
+ r = -EFAULT;
+ if (copy_from_user(&kvm_regs, (void *)arg, sizeof kvm_regs))
+ goto out;
+ r = kvm_dev_ioctl_set_regs(kvm, &kvm_regs);
+ if (r)
+ goto out;
+ r = 0;
+ break;
+ }
+ case KVM_GET_SREGS: {
+ struct kvm_sregs kvm_sregs;
+
+ r = -EFAULT;
+ if (copy_from_user(&kvm_sregs, (void *)arg, sizeof kvm_sregs))
+ goto out;
+ r = kvm_dev_ioctl_get_sregs(kvm, &kvm_sregs);
+ if (r)
+ goto out;
+ r = -EFAULT;
+ if (copy_to_user((void *)arg, &kvm_sregs, sizeof kvm_sregs))
+ goto out;
+ r = 0;
+ break;
+ }
+ case KVM_SET_SREGS: {
+ struct kvm_sregs kvm_sregs;
+
+ r = -EFAULT;
+ if (copy_from_user(&kvm_sregs, (void *)arg, sizeof kvm_sregs))
+ goto out;
+ r = kvm_dev_ioctl_set_sregs(kvm, &kvm_sregs);
+ if (r)
+ goto out;
+ r = 0;
+ break;
+ }
+ case KVM_TRANSLATE: {
+ struct kvm_translation tr;
+
+ r = -EFAULT;
+ if (copy_from_user(&tr, (void *)arg, sizeof tr))
+ goto out;
+ r = kvm_dev_ioctl_translate(kvm, &tr);
+ if (r)
+ goto out;
+ r = -EFAULT;
+ if (copy_to_user((void *)arg, &tr, sizeof tr))
+ goto out;
+ r = 0;
+ break;
+ }
+ case KVM_INTERRUPT: {
+ struct kvm_interrupt irq;
+
+ r = -EFAULT;
+ if (copy_from_user(&irq, (void *)arg, sizeof irq))
+ goto out;
+ r = kvm_dev_ioctl_interrupt(kvm, &irq);
+ if (r)
+ goto out;
+ r = 0;
+ break;
+ }
+ case KVM_DEBUG_GUEST: {
+ struct kvm_debug_guest dbg;
+
+ r = -EFAULT;
+ if (copy_from_user(&dbg, (void *)arg, sizeof dbg))
+ goto out;
+ r = kvm_dev_ioctl_debug_guest(kvm, &dbg);
+ if (r)
+ goto out;
+ r = 0;
+ break;
+ }
+ case KVM_SET_MEMORY_REGION: {
+ struct kvm_memory_region kvm_mem;
+
+ r = -EFAULT;
+ if (copy_from_user(&kvm_mem, (void *)arg, sizeof kvm_mem))
+ goto out;
+ r = kvm_dev_ioctl_set_memory_region(kvm, &kvm_mem);
+ if (r)
+ goto out;
+ break;
+ }
+ case KVM_GET_DIRTY_LOG: {
+ struct kvm_dirty_log log;
+
+ r = -EFAULT;
+ if (copy_from_user(&log, (void *)arg, sizeof log))
+ goto out;
+ r = kvm_dev_ioctl_get_dirty_log(kvm, &log);
+ if (r)
+ goto out;
+ break;
+ }
+ case KVM_GET_MSRS:
+ r = msr_io(kvm, (void __user *)arg, get_msr, 1);
+ break;
+ case KVM_SET_MSRS:
+ r = msr_io(kvm, (void __user *)arg, do_set_msr, 0);
+ break;
+ case KVM_GET_MSR_INDEX_LIST: {
+ struct kvm_msr_list __user *user_msr_list = (void __user *)arg;
+ struct kvm_msr_list msr_list;
+ unsigned n;
+
+ r = -EFAULT;
+ if (copy_from_user(&msr_list, user_msr_list, sizeof msr_list))
+ goto out;
+ n = msr_list.nmsrs;
+ msr_list.nmsrs = ARRAY_SIZE(msrs_to_save);
+ if (copy_to_user(user_msr_list, &msr_list, sizeof msr_list))
+ goto out;
+ r = -E2BIG;
+ if (n < ARRAY_SIZE(msrs_to_save))
+ goto out;
+ r = -EFAULT;
+ if (copy_to_user(user_msr_list->indices, &msrs_to_save,
+ sizeof msrs_to_save))
+ goto out;
+ r = 0;
+ }
+ default:
+ ;
+ }
+out:
+ return r;
+}
+
+static struct page *kvm_dev_nopage(struct vm_area_struct *vma,
+ unsigned long address,
+ int *type)
+{
+ struct kvm *kvm = vma->vm_file->private_data;
+ unsigned long pgoff;
+ struct kvm_memory_slot *slot;
+ struct page *page;
+
+ *type = VM_FAULT_MINOR;
+ pgoff = ((address - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
+ slot = gfn_to_memslot(kvm, pgoff);
+ if (!slot)
+ return NOPAGE_SIGBUS;
+ page = gfn_to_page(slot, pgoff);
+ if (!page)
+ return NOPAGE_SIGBUS;
+ get_page(page);
+ return page;
+}
+
+static struct vm_operations_struct kvm_dev_vm_ops = {
+ .nopage = kvm_dev_nopage,
+};
+
+static int kvm_dev_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ vma->vm_ops = &kvm_dev_vm_ops;
+ return 0;
+}
+
+static struct file_operations kvm_chardev_ops = {
+ .open = kvm_dev_open,
+ .release = kvm_dev_release,
+ .unlocked_ioctl = kvm_dev_ioctl,
+ .compat_ioctl = kvm_dev_ioctl,
+ .mmap = kvm_dev_mmap,
+};
+
+static struct miscdevice kvm_dev = {
+ MISC_DYNAMIC_MINOR,
+ "kvm",
+ &kvm_chardev_ops,
+};
+
+static int kvm_reboot(struct notifier_block *notifier, unsigned long val,
+ void *v)
+{
+ if (val == SYS_RESTART) {
+ /*
+ * Some (well, at least mine) BIOSes hang on reboot if
+ * in vmx root mode.
+ */
+ printk(KERN_INFO "kvm: exiting hardware virtualization\n");
+ on_each_cpu(kvm_arch_ops->hardware_disable, 0, 0, 1);
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block kvm_reboot_notifier = {
+ .notifier_call = kvm_reboot,
+ .priority = 0,
+};
+
+static __init void kvm_init_debug(void)
+{
+ struct kvm_stats_debugfs_item *p;
+
+ debugfs_dir = debugfs_create_dir("kvm", 0);
+ for (p = debugfs_entries; p->name; ++p)
+ p->dentry = debugfs_create_u32(p->name, 0444, debugfs_dir,
+ p->data);
+}
+
+static void kvm_exit_debug(void)
+{
+ struct kvm_stats_debugfs_item *p;
+
+ for (p = debugfs_entries; p->name; ++p)
+ debugfs_remove(p->dentry);
+ debugfs_remove(debugfs_dir);
+}
+
+hpa_t bad_page_address;
+
+int kvm_init_arch(struct kvm_arch_ops *ops, struct module *module)
+{
+ int r;
+
+ kvm_arch_ops = ops;
+
+ if (!kvm_arch_ops->cpu_has_kvm_support()) {
+ printk(KERN_ERR "kvm: no hardware support\n");
+ return -EOPNOTSUPP;
+ }
+ if (kvm_arch_ops->disabled_by_bios()) {
+ printk(KERN_ERR "kvm: disabled by bios\n");
+ return -EOPNOTSUPP;
+ }
+
+ r = kvm_arch_ops->hardware_setup();
+ if (r < 0)
+ return r;
+
+ on_each_cpu(kvm_arch_ops->hardware_enable, 0, 0, 1);
+ register_reboot_notifier(&kvm_reboot_notifier);
+
+ kvm_chardev_ops.owner = module;
+
+ r = misc_register(&kvm_dev);
+ if (r) {
+ printk (KERN_ERR "kvm: misc device register failed\n");
+ goto out_free;
+ }
+
+ return r;
+
+out_free:
+ unregister_reboot_notifier(&kvm_reboot_notifier);
+ on_each_cpu(kvm_arch_ops->hardware_disable, 0, 0, 1);
+ kvm_arch_ops->hardware_unsetup();
+ return r;
+}
+
+void kvm_exit_arch(void)
+{
+ misc_deregister(&kvm_dev);
+
+ unregister_reboot_notifier(&kvm_reboot_notifier);
+ on_each_cpu(kvm_arch_ops->hardware_disable, 0, 0, 1);
+ kvm_arch_ops->hardware_unsetup();
+}
+
+static __init int kvm_init(void)
+{
+ static struct page *bad_page;
+ int r = 0;
+
+ kvm_init_debug();
+
+ if ((bad_page = alloc_page(GFP_KERNEL)) == NULL) {
+ r = -ENOMEM;
+ goto out;
+ }
+
+ bad_page_address = page_to_pfn(bad_page) << PAGE_SHIFT;
+ memset(__va(bad_page_address), 0, PAGE_SIZE);
+
+ return r;
+
+out:
+ kvm_exit_debug();
+ return r;
+}
+
+static __exit void kvm_exit(void)
+{
+ kvm_exit_debug();
+ __free_page(pfn_to_page(bad_page_address >> PAGE_SHIFT));
+}
+
+module_init(kvm_init)
+module_exit(kvm_exit)
+
+EXPORT_SYMBOL_GPL(kvm_init_arch);
+EXPORT_SYMBOL_GPL(kvm_exit_arch);
--- /dev/null
+#ifndef __KVM_SVM_H
+#define __KVM_SVM_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <asm/msr.h>
+
+#include "svm.h"
+#include "kvm.h"
+
+static const u32 host_save_msrs[] = {
+#ifdef CONFIG_X86_64
+ MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
+ MSR_FS_BASE, MSR_GS_BASE,
+#endif
+ MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
+ MSR_IA32_DEBUGCTLMSR, /*MSR_IA32_LASTBRANCHFROMIP,
+ MSR_IA32_LASTBRANCHTOIP, MSR_IA32_LASTINTFROMIP,MSR_IA32_LASTINTTOIP,*/
+};
+
+#define NR_HOST_SAVE_MSRS (sizeof(host_save_msrs) / sizeof(*host_save_msrs))
+#define NUM_DB_REGS 4
+
+struct vcpu_svm {
+ struct vmcb *vmcb;
+ unsigned long vmcb_pa;
+ struct svm_cpu_data *svm_data;
+ uint64_t asid_generation;
+
+ unsigned long cr0;
+ unsigned long cr4;
+ unsigned long db_regs[NUM_DB_REGS];
+
+ u64 next_rip;
+
+ u64 host_msrs[NR_HOST_SAVE_MSRS];
+ unsigned long host_cr2;
+ unsigned long host_db_regs[NUM_DB_REGS];
+ unsigned long host_dr6;
+ unsigned long host_dr7;
+};
+
+#endif
+
--- /dev/null
+#ifndef __KVM_VMX_H
+#define __KVM_VMX_H
+
+#ifdef CONFIG_X86_64
+/*
+ * avoid save/load MSR_SYSCALL_MASK and MSR_LSTAR by std vt
+ * mechanism (cpu bug AA24)
+ */
+#define NR_BAD_MSRS 2
+#else
+#define NR_BAD_MSRS 0
+#endif
+
+#endif
--- /dev/null
+/*
+ * Kernel-based Virtual Machine driver for Linux
+ *
+ * This module enables machines with Intel VT-x extensions to run virtual
+ * machines without emulation or binary translation.
+ *
+ * MMU support
+ *
+ * Copyright (C) 2006 Qumranet, Inc.
+ *
+ * Authors:
+ * Yaniv Kamay <yaniv@qumranet.com>
+ * Avi Kivity <avi@qumranet.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/page.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+#include "vmx.h"
+#include "kvm.h"
+
+#define pgprintk(x...) do { } while (0)
+
+#define ASSERT(x) \
+ if (!(x)) { \
+ printk(KERN_WARNING "assertion failed %s:%d: %s\n", \
+ __FILE__, __LINE__, #x); \
+ }
+
+#define PT64_ENT_PER_PAGE 512
+#define PT32_ENT_PER_PAGE 1024
+
+#define PT_WRITABLE_SHIFT 1
+
+#define PT_PRESENT_MASK (1ULL << 0)
+#define PT_WRITABLE_MASK (1ULL << PT_WRITABLE_SHIFT)
+#define PT_USER_MASK (1ULL << 2)
+#define PT_PWT_MASK (1ULL << 3)
+#define PT_PCD_MASK (1ULL << 4)
+#define PT_ACCESSED_MASK (1ULL << 5)
+#define PT_DIRTY_MASK (1ULL << 6)
+#define PT_PAGE_SIZE_MASK (1ULL << 7)
+#define PT_PAT_MASK (1ULL << 7)
+#define PT_GLOBAL_MASK (1ULL << 8)
+#define PT64_NX_MASK (1ULL << 63)
+
+#define PT_PAT_SHIFT 7
+#define PT_DIR_PAT_SHIFT 12
+#define PT_DIR_PAT_MASK (1ULL << PT_DIR_PAT_SHIFT)
+
+#define PT32_DIR_PSE36_SIZE 4
+#define PT32_DIR_PSE36_SHIFT 13
+#define PT32_DIR_PSE36_MASK (((1ULL << PT32_DIR_PSE36_SIZE) - 1) << PT32_DIR_PSE36_SHIFT)
+
+
+#define PT32_PTE_COPY_MASK \
+ (PT_PRESENT_MASK | PT_ACCESSED_MASK | PT_DIRTY_MASK | PT_GLOBAL_MASK)
+
+#define PT64_PTE_COPY_MASK (PT64_NX_MASK | PT32_PTE_COPY_MASK)
+
+#define PT_FIRST_AVAIL_BITS_SHIFT 9
+#define PT64_SECOND_AVAIL_BITS_SHIFT 52
+
+#define PT_SHADOW_PS_MARK (1ULL << PT_FIRST_AVAIL_BITS_SHIFT)
+#define PT_SHADOW_IO_MARK (1ULL << PT_FIRST_AVAIL_BITS_SHIFT)
+
+#define PT_SHADOW_WRITABLE_SHIFT (PT_FIRST_AVAIL_BITS_SHIFT + 1)
+#define PT_SHADOW_WRITABLE_MASK (1ULL << PT_SHADOW_WRITABLE_SHIFT)
+
+#define PT_SHADOW_USER_SHIFT (PT_SHADOW_WRITABLE_SHIFT + 1)
+#define PT_SHADOW_USER_MASK (1ULL << (PT_SHADOW_USER_SHIFT))
+
+#define PT_SHADOW_BITS_OFFSET (PT_SHADOW_WRITABLE_SHIFT - PT_WRITABLE_SHIFT)
+
+#define VALID_PAGE(x) ((x) != INVALID_PAGE)
+
+#define PT64_LEVEL_BITS 9
+
+#define PT64_LEVEL_SHIFT(level) \
+ ( PAGE_SHIFT + (level - 1) * PT64_LEVEL_BITS )
+
+#define PT64_LEVEL_MASK(level) \
+ (((1ULL << PT64_LEVEL_BITS) - 1) << PT64_LEVEL_SHIFT(level))
+
+#define PT64_INDEX(address, level)\
+ (((address) >> PT64_LEVEL_SHIFT(level)) & ((1 << PT64_LEVEL_BITS) - 1))
+
+
+#define PT32_LEVEL_BITS 10
+
+#define PT32_LEVEL_SHIFT(level) \
+ ( PAGE_SHIFT + (level - 1) * PT32_LEVEL_BITS )
+
+#define PT32_LEVEL_MASK(level) \
+ (((1ULL << PT32_LEVEL_BITS) - 1) << PT32_LEVEL_SHIFT(level))
+
+#define PT32_INDEX(address, level)\
+ (((address) >> PT32_LEVEL_SHIFT(level)) & ((1 << PT32_LEVEL_BITS) - 1))
+
+
+#define PT64_BASE_ADDR_MASK (((1ULL << 52) - 1) & PAGE_MASK)
+#define PT64_DIR_BASE_ADDR_MASK \
+ (PT64_BASE_ADDR_MASK & ~((1ULL << (PAGE_SHIFT + PT64_LEVEL_BITS)) - 1))
+
+#define PT32_BASE_ADDR_MASK PAGE_MASK
+#define PT32_DIR_BASE_ADDR_MASK \
+ (PAGE_MASK & ~((1ULL << (PAGE_SHIFT + PT32_LEVEL_BITS)) - 1))
+
+
+#define PFERR_PRESENT_MASK (1U << 0)
+#define PFERR_WRITE_MASK (1U << 1)
+#define PFERR_USER_MASK (1U << 2)
+
+#define PT64_ROOT_LEVEL 4
+#define PT32_ROOT_LEVEL 2
+#define PT32E_ROOT_LEVEL 3
+
+#define PT_DIRECTORY_LEVEL 2
+#define PT_PAGE_TABLE_LEVEL 1
+
+static int is_write_protection(struct kvm_vcpu *vcpu)
+{
+ return vcpu->cr0 & CR0_WP_MASK;
+}
+
+static int is_cpuid_PSE36(void)
+{
+ return 1;
+}
+
+static int is_present_pte(unsigned long pte)
+{
+ return pte & PT_PRESENT_MASK;
+}
+
+static int is_writeble_pte(unsigned long pte)
+{
+ return pte & PT_WRITABLE_MASK;
+}
+
+static int is_io_pte(unsigned long pte)
+{
+ return pte & PT_SHADOW_IO_MARK;
+}
+
+static void kvm_mmu_free_page(struct kvm_vcpu *vcpu, hpa_t page_hpa)
+{
+ struct kvm_mmu_page *page_head = page_header(page_hpa);
+
+ list_del(&page_head->link);
+ page_head->page_hpa = page_hpa;
+ list_add(&page_head->link, &vcpu->free_pages);
+}
+
+static int is_empty_shadow_page(hpa_t page_hpa)
+{
+ u32 *pos;
+ u32 *end;
+ for (pos = __va(page_hpa), end = pos + PAGE_SIZE / sizeof(u32);
+ pos != end; pos++)
+ if (*pos != 0)
+ return 0;
+ return 1;
+}
+
+static hpa_t kvm_mmu_alloc_page(struct kvm_vcpu *vcpu, u64 *parent_pte)
+{
+ struct kvm_mmu_page *page;
+
+ if (list_empty(&vcpu->free_pages))
+ return INVALID_PAGE;
+
+ page = list_entry(vcpu->free_pages.next, struct kvm_mmu_page, link);
+ list_del(&page->link);
+ list_add(&page->link, &vcpu->kvm->active_mmu_pages);
+ ASSERT(is_empty_shadow_page(page->page_hpa));
+ page->slot_bitmap = 0;
+ page->global = 1;
+ page->parent_pte = parent_pte;
+ return page->page_hpa;
+}
+
+static void page_header_update_slot(struct kvm *kvm, void *pte, gpa_t gpa)
+{
+ int slot = memslot_id(kvm, gfn_to_memslot(kvm, gpa >> PAGE_SHIFT));
+ struct kvm_mmu_page *page_head = page_header(__pa(pte));
+
+ __set_bit(slot, &page_head->slot_bitmap);
+}
+
+hpa_t safe_gpa_to_hpa(struct kvm_vcpu *vcpu, gpa_t gpa)
+{
+ hpa_t hpa = gpa_to_hpa(vcpu, gpa);
+
+ return is_error_hpa(hpa) ? bad_page_address | (gpa & ~PAGE_MASK): hpa;
+}
+
+hpa_t gpa_to_hpa(struct kvm_vcpu *vcpu, gpa_t gpa)
+{
+ struct kvm_memory_slot *slot;
+ struct page *page;
+
+ ASSERT((gpa & HPA_ERR_MASK) == 0);
+ slot = gfn_to_memslot(vcpu->kvm, gpa >> PAGE_SHIFT);
+ if (!slot)
+ return gpa | HPA_ERR_MASK;
+ page = gfn_to_page(slot, gpa >> PAGE_SHIFT);
+ return ((hpa_t)page_to_pfn(page) << PAGE_SHIFT)
+ | (gpa & (PAGE_SIZE-1));
+}
+
+hpa_t gva_to_hpa(struct kvm_vcpu *vcpu, gva_t gva)
+{
+ gpa_t gpa = vcpu->mmu.gva_to_gpa(vcpu, gva);
+
+ if (gpa == UNMAPPED_GVA)
+ return UNMAPPED_GVA;
+ return gpa_to_hpa(vcpu, gpa);
+}
+
+
+static void release_pt_page_64(struct kvm_vcpu *vcpu, hpa_t page_hpa,
+ int level)
+{
+ ASSERT(vcpu);
+ ASSERT(VALID_PAGE(page_hpa));
+ ASSERT(level <= PT64_ROOT_LEVEL && level > 0);
+
+ if (level == 1)
+ memset(__va(page_hpa), 0, PAGE_SIZE);
+ else {
+ u64 *pos;
+ u64 *end;
+
+ for (pos = __va(page_hpa), end = pos + PT64_ENT_PER_PAGE;
+ pos != end; pos++) {
+ u64 current_ent = *pos;
+
+ *pos = 0;
+ if (is_present_pte(current_ent))
+ release_pt_page_64(vcpu,
+ current_ent &
+ PT64_BASE_ADDR_MASK,
+ level - 1);
+ }
+ }
+ kvm_mmu_free_page(vcpu, page_hpa);
+}
+
+static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
+{
+}
+
+static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, hpa_t p)
+{
+ int level = PT32E_ROOT_LEVEL;
+ hpa_t table_addr = vcpu->mmu.root_hpa;
+
+ for (; ; level--) {
+ u32 index = PT64_INDEX(v, level);
+ u64 *table;
+
+ ASSERT(VALID_PAGE(table_addr));
+ table = __va(table_addr);
+
+ if (level == 1) {
+ mark_page_dirty(vcpu->kvm, v >> PAGE_SHIFT);
+ page_header_update_slot(vcpu->kvm, table, v);
+ table[index] = p | PT_PRESENT_MASK | PT_WRITABLE_MASK |
+ PT_USER_MASK;
+ return 0;
+ }
+
+ if (table[index] == 0) {
+ hpa_t new_table = kvm_mmu_alloc_page(vcpu,
+ &table[index]);
+
+ if (!VALID_PAGE(new_table)) {
+ pgprintk("nonpaging_map: ENOMEM\n");
+ return -ENOMEM;
+ }
+
+ if (level == PT32E_ROOT_LEVEL)
+ table[index] = new_table | PT_PRESENT_MASK;
+ else
+ table[index] = new_table | PT_PRESENT_MASK |
+ PT_WRITABLE_MASK | PT_USER_MASK;
+ }
+ table_addr = table[index] & PT64_BASE_ADDR_MASK;
+ }
+}
+
+static void nonpaging_flush(struct kvm_vcpu *vcpu)
+{
+ hpa_t root = vcpu->mmu.root_hpa;
+
+ ++kvm_stat.tlb_flush;
+ pgprintk("nonpaging_flush\n");
+ ASSERT(VALID_PAGE(root));
+ release_pt_page_64(vcpu, root, vcpu->mmu.shadow_root_level);
+ root = kvm_mmu_alloc_page(vcpu, NULL);
+ ASSERT(VALID_PAGE(root));
+ vcpu->mmu.root_hpa = root;
+ if (is_paging(vcpu))
+ root |= (vcpu->cr3 & (CR3_PCD_MASK | CR3_WPT_MASK));
+ kvm_arch_ops->set_cr3(vcpu, root);
+ kvm_arch_ops->tlb_flush(vcpu);
+}
+
+static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gva_t vaddr)
+{
+ return vaddr;
+}
+
+static int nonpaging_page_fault(struct kvm_vcpu *vcpu, gva_t gva,
+ u32 error_code)
+{
+ int ret;
+ gpa_t addr = gva;
+
+ ASSERT(vcpu);
+ ASSERT(VALID_PAGE(vcpu->mmu.root_hpa));
+
+ for (;;) {
+ hpa_t paddr;
+
+ paddr = gpa_to_hpa(vcpu , addr & PT64_BASE_ADDR_MASK);
+
+ if (is_error_hpa(paddr))
+ return 1;
+
+ ret = nonpaging_map(vcpu, addr & PAGE_MASK, paddr);
+ if (ret) {
+ nonpaging_flush(vcpu);
+ continue;
+ }
+ break;
+ }
+ return ret;
+}
+
+static void nonpaging_inval_page(struct kvm_vcpu *vcpu, gva_t addr)
+{
+}
+
+static void nonpaging_free(struct kvm_vcpu *vcpu)
+{
+ hpa_t root;
+
+ ASSERT(vcpu);
+ root = vcpu->mmu.root_hpa;
+ if (VALID_PAGE(root))
+ release_pt_page_64(vcpu, root, vcpu->mmu.shadow_root_level);
+ vcpu->mmu.root_hpa = INVALID_PAGE;
+}
+
+static int nonpaging_init_context(struct kvm_vcpu *vcpu)
+{
+ struct kvm_mmu *context = &vcpu->mmu;
+
+ context->new_cr3 = nonpaging_new_cr3;
+ context->page_fault = nonpaging_page_fault;
+ context->inval_page = nonpaging_inval_page;
+ context->gva_to_gpa = nonpaging_gva_to_gpa;
+ context->free = nonpaging_free;
+ context->root_level = PT32E_ROOT_LEVEL;
+ context->shadow_root_level = PT32E_ROOT_LEVEL;
+ context->root_hpa = kvm_mmu_alloc_page(vcpu, NULL);
+ ASSERT(VALID_PAGE(context->root_hpa));
+ kvm_arch_ops->set_cr3(vcpu, context->root_hpa);
+ return 0;
+}
+
+
+static void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu)
+{
+ struct kvm_mmu_page *page, *npage;
+
+ list_for_each_entry_safe(page, npage, &vcpu->kvm->active_mmu_pages,
+ link) {
+ if (page->global)
+ continue;
+
+ if (!page->parent_pte)
+ continue;
+
+ *page->parent_pte = 0;
+ release_pt_page_64(vcpu, page->page_hpa, 1);
+ }
+ ++kvm_stat.tlb_flush;
+ kvm_arch_ops->tlb_flush(vcpu);
+}
+
+static void paging_new_cr3(struct kvm_vcpu *vcpu)
+{
+ kvm_mmu_flush_tlb(vcpu);
+}
+
+static void mark_pagetable_nonglobal(void *shadow_pte)
+{
+ page_header(__pa(shadow_pte))->global = 0;
+}
+
+static inline void set_pte_common(struct kvm_vcpu *vcpu,
+ u64 *shadow_pte,
+ gpa_t gaddr,
+ int dirty,
+ u64 access_bits)
+{
+ hpa_t paddr;
+
+ *shadow_pte |= access_bits << PT_SHADOW_BITS_OFFSET;
+ if (!dirty)
+ access_bits &= ~PT_WRITABLE_MASK;
+
+ if (access_bits & PT_WRITABLE_MASK)
+ mark_page_dirty(vcpu->kvm, gaddr >> PAGE_SHIFT);
+
+ *shadow_pte |= access_bits;
+
+ paddr = gpa_to_hpa(vcpu, gaddr & PT64_BASE_ADDR_MASK);
+
+ if (!(*shadow_pte & PT_GLOBAL_MASK))
+ mark_pagetable_nonglobal(shadow_pte);
+
+ if (is_error_hpa(paddr)) {
+ *shadow_pte |= gaddr;
+ *shadow_pte |= PT_SHADOW_IO_MARK;
+ *shadow_pte &= ~PT_PRESENT_MASK;
+ } else {
+ *shadow_pte |= paddr;
+ page_header_update_slot(vcpu->kvm, shadow_pte, gaddr);
+ }
+}
+
+static void inject_page_fault(struct kvm_vcpu *vcpu,
+ u64 addr,
+ u32 err_code)
+{
+ kvm_arch_ops->inject_page_fault(vcpu, addr, err_code);
+}
+
+static inline int fix_read_pf(u64 *shadow_ent)
+{
+ if ((*shadow_ent & PT_SHADOW_USER_MASK) &&
+ !(*shadow_ent & PT_USER_MASK)) {
+ /*
+ * If supervisor write protect is disabled, we shadow kernel
+ * pages as user pages so we can trap the write access.
+ */
+ *shadow_ent |= PT_USER_MASK;
+ *shadow_ent &= ~PT_WRITABLE_MASK;
+
+ return 1;
+
+ }
+ return 0;
+}
+
+static int may_access(u64 pte, int write, int user)
+{
+
+ if (user && !(pte & PT_USER_MASK))
+ return 0;
+ if (write && !(pte & PT_WRITABLE_MASK))
+ return 0;
+ return 1;
+}
+
+/*
+ * Remove a shadow pte.
+ */
+static void paging_inval_page(struct kvm_vcpu *vcpu, gva_t addr)
+{
+ hpa_t page_addr = vcpu->mmu.root_hpa;
+ int level = vcpu->mmu.shadow_root_level;
+
+ ++kvm_stat.invlpg;
+
+ for (; ; level--) {
+ u32 index = PT64_INDEX(addr, level);
+ u64 *table = __va(page_addr);
+
+ if (level == PT_PAGE_TABLE_LEVEL ) {
+ table[index] = 0;
+ return;
+ }
+
+ if (!is_present_pte(table[index]))
+ return;
+
+ page_addr = table[index] & PT64_BASE_ADDR_MASK;
+
+ if (level == PT_DIRECTORY_LEVEL &&
+ (table[index] & PT_SHADOW_PS_MARK)) {
+ table[index] = 0;
+ release_pt_page_64(vcpu, page_addr, PT_PAGE_TABLE_LEVEL);
+
+ kvm_arch_ops->tlb_flush(vcpu);
+ return;
+ }
+ }
+}
+
+static void paging_free(struct kvm_vcpu *vcpu)
+{
+ nonpaging_free(vcpu);
+}
+
+#define PTTYPE 64
+#include "paging_tmpl.h"
+#undef PTTYPE
+
+#define PTTYPE 32
+#include "paging_tmpl.h"
+#undef PTTYPE
+
+static int paging64_init_context(struct kvm_vcpu *vcpu)
+{
+ struct kvm_mmu *context = &vcpu->mmu;
+
+ ASSERT(is_pae(vcpu));
+ context->new_cr3 = paging_new_cr3;
+ context->page_fault = paging64_page_fault;
+ context->inval_page = paging_inval_page;
+ context->gva_to_gpa = paging64_gva_to_gpa;
+ context->free = paging_free;
+ context->root_level = PT64_ROOT_LEVEL;
+ context->shadow_root_level = PT64_ROOT_LEVEL;
+ context->root_hpa = kvm_mmu_alloc_page(vcpu, NULL);
+ ASSERT(VALID_PAGE(context->root_hpa));
+ kvm_arch_ops->set_cr3(vcpu, context->root_hpa |
+ (vcpu->cr3 & (CR3_PCD_MASK | CR3_WPT_MASK)));
+ return 0;
+}
+
+static int paging32_init_context(struct kvm_vcpu *vcpu)
+{
+ struct kvm_mmu *context = &vcpu->mmu;
+
+ context->new_cr3 = paging_new_cr3;
+ context->page_fault = paging32_page_fault;
+ context->inval_page = paging_inval_page;
+ context->gva_to_gpa = paging32_gva_to_gpa;
+ context->free = paging_free;
+ context->root_level = PT32_ROOT_LEVEL;
+ context->shadow_root_level = PT32E_ROOT_LEVEL;
+ context->root_hpa = kvm_mmu_alloc_page(vcpu, NULL);
+ ASSERT(VALID_PAGE(context->root_hpa));
+ kvm_arch_ops->set_cr3(vcpu, context->root_hpa |
+ (vcpu->cr3 & (CR3_PCD_MASK | CR3_WPT_MASK)));
+ return 0;
+}
+
+static int paging32E_init_context(struct kvm_vcpu *vcpu)
+{
+ int ret;
+
+ if ((ret = paging64_init_context(vcpu)))
+ return ret;
+
+ vcpu->mmu.root_level = PT32E_ROOT_LEVEL;
+ vcpu->mmu.shadow_root_level = PT32E_ROOT_LEVEL;
+ return 0;
+}
+
+static int init_kvm_mmu(struct kvm_vcpu *vcpu)
+{
+ ASSERT(vcpu);
+ ASSERT(!VALID_PAGE(vcpu->mmu.root_hpa));
+
+ if (!is_paging(vcpu))
+ return nonpaging_init_context(vcpu);
+ else if (kvm_arch_ops->is_long_mode(vcpu))
+ return paging64_init_context(vcpu);
+ else if (is_pae(vcpu))
+ return paging32E_init_context(vcpu);
+ else
+ return paging32_init_context(vcpu);
+}
+
+static void destroy_kvm_mmu(struct kvm_vcpu *vcpu)
+{
+ ASSERT(vcpu);
+ if (VALID_PAGE(vcpu->mmu.root_hpa)) {
+ vcpu->mmu.free(vcpu);
+ vcpu->mmu.root_hpa = INVALID_PAGE;
+ }
+}
+
+int kvm_mmu_reset_context(struct kvm_vcpu *vcpu)
+{
+ destroy_kvm_mmu(vcpu);
+ return init_kvm_mmu(vcpu);
+}
+
+static void free_mmu_pages(struct kvm_vcpu *vcpu)
+{
+ while (!list_empty(&vcpu->free_pages)) {
+ struct kvm_mmu_page *page;
+
+ page = list_entry(vcpu->free_pages.next,
+ struct kvm_mmu_page, link);
+ list_del(&page->link);
+ __free_page(pfn_to_page(page->page_hpa >> PAGE_SHIFT));
+ page->page_hpa = INVALID_PAGE;
+ }
+}
+
+static int alloc_mmu_pages(struct kvm_vcpu *vcpu)
+{
+ int i;
+
+ ASSERT(vcpu);
+
+ for (i = 0; i < KVM_NUM_MMU_PAGES; i++) {
+ struct page *page;
+ struct kvm_mmu_page *page_header = &vcpu->page_header_buf[i];
+
+ INIT_LIST_HEAD(&page_header->link);
+ if ((page = alloc_page(GFP_KVM_MMU)) == NULL)
+ goto error_1;
+ page->private = (unsigned long)page_header;
+ page_header->page_hpa = (hpa_t)page_to_pfn(page) << PAGE_SHIFT;
+ memset(__va(page_header->page_hpa), 0, PAGE_SIZE);
+ list_add(&page_header->link, &vcpu->free_pages);
+ }
+ return 0;
+
+error_1:
+ free_mmu_pages(vcpu);
+ return -ENOMEM;
+}
+
+int kvm_mmu_init(struct kvm_vcpu *vcpu)
+{
+ int r;
+
+ ASSERT(vcpu);
+ ASSERT(!VALID_PAGE(vcpu->mmu.root_hpa));
+ ASSERT(list_empty(&vcpu->free_pages));
+
+ if ((r = alloc_mmu_pages(vcpu)))
+ return r;
+
+ if ((r = init_kvm_mmu(vcpu))) {
+ free_mmu_pages(vcpu);
+ return r;
+ }
+ return 0;
+}
+
+void kvm_mmu_destroy(struct kvm_vcpu *vcpu)
+{
+ ASSERT(vcpu);
+
+ destroy_kvm_mmu(vcpu);
+ free_mmu_pages(vcpu);
+}
+
+void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot)
+{
+ struct kvm_mmu_page *page;
+
+ list_for_each_entry(page, &kvm->active_mmu_pages, link) {
+ int i;
+ u64 *pt;
+
+ if (!test_bit(slot, &page->slot_bitmap))
+ continue;
+
+ pt = __va(page->page_hpa);
+ for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
+ /* avoid RMW */
+ if (pt[i] & PT_WRITABLE_MASK)
+ pt[i] &= ~PT_WRITABLE_MASK;
+
+ }
+}
--- /dev/null
+/*
+ * Kernel-based Virtual Machine driver for Linux
+ *
+ * This module enables machines with Intel VT-x extensions to run virtual
+ * machines without emulation or binary translation.
+ *
+ * MMU support
+ *
+ * Copyright (C) 2006 Qumranet, Inc.
+ *
+ * Authors:
+ * Yaniv Kamay <yaniv@qumranet.com>
+ * Avi Kivity <avi@qumranet.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+/*
+ * We need the mmu code to access both 32-bit and 64-bit guest ptes,
+ * so the code in this file is compiled twice, once per pte size.
+ */
+
+#if PTTYPE == 64
+ #define pt_element_t u64
+ #define guest_walker guest_walker64
+ #define FNAME(name) paging##64_##name
+ #define PT_BASE_ADDR_MASK PT64_BASE_ADDR_MASK
+ #define PT_DIR_BASE_ADDR_MASK PT64_DIR_BASE_ADDR_MASK
+ #define PT_INDEX(addr, level) PT64_INDEX(addr, level)
+ #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
+ #define PT_LEVEL_MASK(level) PT64_LEVEL_MASK(level)
+ #define PT_PTE_COPY_MASK PT64_PTE_COPY_MASK
+#elif PTTYPE == 32
+ #define pt_element_t u32
+ #define guest_walker guest_walker32
+ #define FNAME(name) paging##32_##name
+ #define PT_BASE_ADDR_MASK PT32_BASE_ADDR_MASK
+ #define PT_DIR_BASE_ADDR_MASK PT32_DIR_BASE_ADDR_MASK
+ #define PT_INDEX(addr, level) PT32_INDEX(addr, level)
+ #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
+ #define PT_LEVEL_MASK(level) PT32_LEVEL_MASK(level)
+ #define PT_PTE_COPY_MASK PT32_PTE_COPY_MASK
+#else
+ #error Invalid PTTYPE value
+#endif
+
+/*
+ * The guest_walker structure emulates the behavior of the hardware page
+ * table walker.
+ */
+struct guest_walker {
+ int level;
+ pt_element_t *table;
+ pt_element_t inherited_ar;
+};
+
+static void FNAME(init_walker)(struct guest_walker *walker,
+ struct kvm_vcpu *vcpu)
+{
+ hpa_t hpa;
+ struct kvm_memory_slot *slot;
+
+ walker->level = vcpu->mmu.root_level;
+ slot = gfn_to_memslot(vcpu->kvm,
+ (vcpu->cr3 & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT);
+ hpa = safe_gpa_to_hpa(vcpu, vcpu->cr3 & PT64_BASE_ADDR_MASK);
+ walker->table = kmap_atomic(pfn_to_page(hpa >> PAGE_SHIFT), KM_USER0);
+
+ ASSERT((!kvm_arch_ops->is_long_mode(vcpu) && is_pae(vcpu)) ||
+ (vcpu->cr3 & ~(PAGE_MASK | CR3_FLAGS_MASK)) == 0);
+
+ walker->table = (pt_element_t *)( (unsigned long)walker->table |
+ (unsigned long)(vcpu->cr3 & ~(PAGE_MASK | CR3_FLAGS_MASK)) );
+ walker->inherited_ar = PT_USER_MASK | PT_WRITABLE_MASK;
+}
+
+static void FNAME(release_walker)(struct guest_walker *walker)
+{
+ kunmap_atomic(walker->table, KM_USER0);
+}
+
+static void FNAME(set_pte)(struct kvm_vcpu *vcpu, u64 guest_pte,
+ u64 *shadow_pte, u64 access_bits)
+{
+ ASSERT(*shadow_pte == 0);
+ access_bits &= guest_pte;
+ *shadow_pte = (guest_pte & PT_PTE_COPY_MASK);
+ set_pte_common(vcpu, shadow_pte, guest_pte & PT_BASE_ADDR_MASK,
+ guest_pte & PT_DIRTY_MASK, access_bits);
+}
+
+static void FNAME(set_pde)(struct kvm_vcpu *vcpu, u64 guest_pde,
+ u64 *shadow_pte, u64 access_bits,
+ int index)
+{
+ gpa_t gaddr;
+
+ ASSERT(*shadow_pte == 0);
+ access_bits &= guest_pde;
+ gaddr = (guest_pde & PT_DIR_BASE_ADDR_MASK) + PAGE_SIZE * index;
+ if (PTTYPE == 32 && is_cpuid_PSE36())
+ gaddr |= (guest_pde & PT32_DIR_PSE36_MASK) <<
+ (32 - PT32_DIR_PSE36_SHIFT);
+ *shadow_pte = guest_pde & PT_PTE_COPY_MASK;
+ set_pte_common(vcpu, shadow_pte, gaddr,
+ guest_pde & PT_DIRTY_MASK, access_bits);
+}
+
+/*
+ * Fetch a guest pte from a specific level in the paging hierarchy.
+ */
+static pt_element_t *FNAME(fetch_guest)(struct kvm_vcpu *vcpu,
+ struct guest_walker *walker,
+ int level,
+ gva_t addr)
+{
+
+ ASSERT(level > 0 && level <= walker->level);
+
+ for (;;) {
+ int index = PT_INDEX(addr, walker->level);
+ hpa_t paddr;
+
+ ASSERT(((unsigned long)walker->table & PAGE_MASK) ==
+ ((unsigned long)&walker->table[index] & PAGE_MASK));
+ if (level == walker->level ||
+ !is_present_pte(walker->table[index]) ||
+ (walker->level == PT_DIRECTORY_LEVEL &&
+ (walker->table[index] & PT_PAGE_SIZE_MASK) &&
+ (PTTYPE == 64 || is_pse(vcpu))))
+ return &walker->table[index];
+ if (walker->level != 3 || kvm_arch_ops->is_long_mode(vcpu))
+ walker->inherited_ar &= walker->table[index];
+ paddr = safe_gpa_to_hpa(vcpu, walker->table[index] & PT_BASE_ADDR_MASK);
+ kunmap_atomic(walker->table, KM_USER0);
+ walker->table = kmap_atomic(pfn_to_page(paddr >> PAGE_SHIFT),
+ KM_USER0);
+ --walker->level;
+ }
+}
+
+/*
+ * Fetch a shadow pte for a specific level in the paging hierarchy.
+ */
+static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
+ struct guest_walker *walker)
+{
+ hpa_t shadow_addr;
+ int level;
+ u64 *prev_shadow_ent = NULL;
+
+ shadow_addr = vcpu->mmu.root_hpa;
+ level = vcpu->mmu.shadow_root_level;
+
+ for (; ; level--) {
+ u32 index = SHADOW_PT_INDEX(addr, level);
+ u64 *shadow_ent = ((u64 *)__va(shadow_addr)) + index;
+ pt_element_t *guest_ent;
+ u64 shadow_pte;
+
+ if (is_present_pte(*shadow_ent) || is_io_pte(*shadow_ent)) {
+ if (level == PT_PAGE_TABLE_LEVEL)
+ return shadow_ent;
+ shadow_addr = *shadow_ent & PT64_BASE_ADDR_MASK;
+ prev_shadow_ent = shadow_ent;
+ continue;
+ }
+
+ if (PTTYPE == 32 && level > PT32_ROOT_LEVEL) {
+ ASSERT(level == PT32E_ROOT_LEVEL);
+ guest_ent = FNAME(fetch_guest)(vcpu, walker,
+ PT32_ROOT_LEVEL, addr);
+ } else
+ guest_ent = FNAME(fetch_guest)(vcpu, walker,
+ level, addr);
+
+ if (!is_present_pte(*guest_ent))
+ return NULL;
+
+ /* Don't set accessed bit on PAE PDPTRs */
+ if (vcpu->mmu.root_level != 3 || walker->level != 3)
+ *guest_ent |= PT_ACCESSED_MASK;
+
+ if (level == PT_PAGE_TABLE_LEVEL) {
+
+ if (walker->level == PT_DIRECTORY_LEVEL) {
+ if (prev_shadow_ent)
+ *prev_shadow_ent |= PT_SHADOW_PS_MARK;
+ FNAME(set_pde)(vcpu, *guest_ent, shadow_ent,
+ walker->inherited_ar,
+ PT_INDEX(addr, PT_PAGE_TABLE_LEVEL));
+ } else {
+ ASSERT(walker->level == PT_PAGE_TABLE_LEVEL);
+ FNAME(set_pte)(vcpu, *guest_ent, shadow_ent, walker->inherited_ar);
+ }
+ return shadow_ent;
+ }
+
+ shadow_addr = kvm_mmu_alloc_page(vcpu, shadow_ent);
+ if (!VALID_PAGE(shadow_addr))
+ return ERR_PTR(-ENOMEM);
+ shadow_pte = shadow_addr | PT_PRESENT_MASK;
+ if (vcpu->mmu.root_level > 3 || level != 3)
+ shadow_pte |= PT_ACCESSED_MASK
+ | PT_WRITABLE_MASK | PT_USER_MASK;
+ *shadow_ent = shadow_pte;
+ prev_shadow_ent = shadow_ent;
+ }
+}
+
+/*
+ * The guest faulted for write. We need to
+ *
+ * - check write permissions
+ * - update the guest pte dirty bit
+ * - update our own dirty page tracking structures
+ */
+static int FNAME(fix_write_pf)(struct kvm_vcpu *vcpu,
+ u64 *shadow_ent,
+ struct guest_walker *walker,
+ gva_t addr,
+ int user)
+{
+ pt_element_t *guest_ent;
+ int writable_shadow;
+ gfn_t gfn;
+
+ if (is_writeble_pte(*shadow_ent))
+ return 0;
+
+ writable_shadow = *shadow_ent & PT_SHADOW_WRITABLE_MASK;
+ if (user) {
+ /*
+ * User mode access. Fail if it's a kernel page or a read-only
+ * page.
+ */
+ if (!(*shadow_ent & PT_SHADOW_USER_MASK) || !writable_shadow)
+ return 0;
+ ASSERT(*shadow_ent & PT_USER_MASK);
+ } else
+ /*
+ * Kernel mode access. Fail if it's a read-only page and
+ * supervisor write protection is enabled.
+ */
+ if (!writable_shadow) {
+ if (is_write_protection(vcpu))
+ return 0;
+ *shadow_ent &= ~PT_USER_MASK;
+ }
+
+ guest_ent = FNAME(fetch_guest)(vcpu, walker, PT_PAGE_TABLE_LEVEL, addr);
+
+ if (!is_present_pte(*guest_ent)) {
+ *shadow_ent = 0;
+ return 0;
+ }
+
+ gfn = (*guest_ent & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
+ mark_page_dirty(vcpu->kvm, gfn);
+ *shadow_ent |= PT_WRITABLE_MASK;
+ *guest_ent |= PT_DIRTY_MASK;
+
+ return 1;
+}
+
+/*
+ * Page fault handler. There are several causes for a page fault:
+ * - there is no shadow pte for the guest pte
+ * - write access through a shadow pte marked read only so that we can set
+ * the dirty bit
+ * - write access to a shadow pte marked read only so we can update the page
+ * dirty bitmap, when userspace requests it
+ * - mmio access; in this case we will never install a present shadow pte
+ * - normal guest page fault due to the guest pte marked not present, not
+ * writable, or not executable
+ *
+ * Returns: 1 if we need to emulate the instruction, 0 otherwise
+ */
+static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
+ u32 error_code)
+{
+ int write_fault = error_code & PFERR_WRITE_MASK;
+ int pte_present = error_code & PFERR_PRESENT_MASK;
+ int user_fault = error_code & PFERR_USER_MASK;
+ struct guest_walker walker;
+ u64 *shadow_pte;
+ int fixed;
+
+ /*
+ * Look up the shadow pte for the faulting address.
+ */
+ for (;;) {
+ FNAME(init_walker)(&walker, vcpu);
+ shadow_pte = FNAME(fetch)(vcpu, addr, &walker);
+ if (IS_ERR(shadow_pte)) { /* must be -ENOMEM */
+ nonpaging_flush(vcpu);
+ FNAME(release_walker)(&walker);
+ continue;
+ }
+ break;
+ }
+
+ /*
+ * The page is not mapped by the guest. Let the guest handle it.
+ */
+ if (!shadow_pte) {
+ inject_page_fault(vcpu, addr, error_code);
+ FNAME(release_walker)(&walker);
+ return 0;
+ }
+
+ /*
+ * Update the shadow pte.
+ */
+ if (write_fault)
+ fixed = FNAME(fix_write_pf)(vcpu, shadow_pte, &walker, addr,
+ user_fault);
+ else
+ fixed = fix_read_pf(shadow_pte);
+
+ FNAME(release_walker)(&walker);
+
+ /*
+ * mmio: emulate if accessible, otherwise its a guest fault.
+ */
+ if (is_io_pte(*shadow_pte)) {
+ if (may_access(*shadow_pte, write_fault, user_fault))
+ return 1;
+ pgprintk("%s: io work, no access\n", __FUNCTION__);
+ inject_page_fault(vcpu, addr,
+ error_code | PFERR_PRESENT_MASK);
+ return 0;
+ }
+
+ /*
+ * pte not present, guest page fault.
+ */
+ if (pte_present && !fixed) {
+ inject_page_fault(vcpu, addr, error_code);
+ return 0;
+ }
+
+ ++kvm_stat.pf_fixed;
+
+ return 0;
+}
+
+static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
+{
+ struct guest_walker walker;
+ pt_element_t guest_pte;
+ gpa_t gpa;
+
+ FNAME(init_walker)(&walker, vcpu);
+ guest_pte = *FNAME(fetch_guest)(vcpu, &walker, PT_PAGE_TABLE_LEVEL,
+ vaddr);
+ FNAME(release_walker)(&walker);
+
+ if (!is_present_pte(guest_pte))
+ return UNMAPPED_GVA;
+
+ if (walker.level == PT_DIRECTORY_LEVEL) {
+ ASSERT((guest_pte & PT_PAGE_SIZE_MASK));
+ ASSERT(PTTYPE == 64 || is_pse(vcpu));
+
+ gpa = (guest_pte & PT_DIR_BASE_ADDR_MASK) | (vaddr &
+ (PT_LEVEL_MASK(PT_PAGE_TABLE_LEVEL) | ~PAGE_MASK));
+
+ if (PTTYPE == 32 && is_cpuid_PSE36())
+ gpa |= (guest_pte & PT32_DIR_PSE36_MASK) <<
+ (32 - PT32_DIR_PSE36_SHIFT);
+ } else {
+ gpa = (guest_pte & PT_BASE_ADDR_MASK);
+ gpa |= (vaddr & ~PAGE_MASK);
+ }
+
+ return gpa;
+}
+
+#undef pt_element_t
+#undef guest_walker
+#undef FNAME
+#undef PT_BASE_ADDR_MASK
+#undef PT_INDEX
+#undef SHADOW_PT_INDEX
+#undef PT_LEVEL_MASK
+#undef PT_PTE_COPY_MASK
+#undef PT_NON_PTE_COPY_MASK
+#undef PT_DIR_BASE_ADDR_MASK
--- /dev/null
+struct segment_descriptor {
+ u16 limit_low;
+ u16 base_low;
+ u8 base_mid;
+ u8 type : 4;
+ u8 system : 1;
+ u8 dpl : 2;
+ u8 present : 1;
+ u8 limit_high : 4;
+ u8 avl : 1;
+ u8 long_mode : 1;
+ u8 default_op : 1;
+ u8 granularity : 1;
+ u8 base_high;
+} __attribute__((packed));
+
+
--- /dev/null
+/*
+ * Kernel-based Virtual Machine driver for Linux
+ *
+ * AMD SVM support
+ *
+ * Copyright (C) 2006 Qumranet, Inc.
+ *
+ * Authors:
+ * Yaniv Kamay <yaniv@qumranet.com>
+ * Avi Kivity <avi@qumranet.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include <linux/highmem.h>
+#include <asm/desc.h>
+
+#include "kvm_svm.h"
+#include "x86_emulate.h"
+
+MODULE_AUTHOR("Qumranet");
+MODULE_LICENSE("GPL");
+
+#define IOPM_ALLOC_ORDER 2
+#define MSRPM_ALLOC_ORDER 1
+
+#define DB_VECTOR 1
+#define UD_VECTOR 6
+#define GP_VECTOR 13
+
+#define DR7_GD_MASK (1 << 13)
+#define DR6_BD_MASK (1 << 13)
+#define CR4_DE_MASK (1UL << 3)
+
+#define SEG_TYPE_LDT 2
+#define SEG_TYPE_BUSY_TSS16 3
+
+#define KVM_EFER_LMA (1 << 10)
+#define KVM_EFER_LME (1 << 8)
+
+unsigned long iopm_base;
+unsigned long msrpm_base;
+
+struct kvm_ldttss_desc {
+ u16 limit0;
+ u16 base0;
+ unsigned base1 : 8, type : 5, dpl : 2, p : 1;
+ unsigned limit1 : 4, zero0 : 3, g : 1, base2 : 8;
+ u32 base3;
+ u32 zero1;
+} __attribute__((packed));
+
+struct svm_cpu_data {
+ int cpu;
+
+ uint64_t asid_generation;
+ uint32_t max_asid;
+ uint32_t next_asid;
+ struct kvm_ldttss_desc *tss_desc;
+
+ struct page *save_area;
+};
+
+static DEFINE_PER_CPU(struct svm_cpu_data *, svm_data);
+
+struct svm_init_data {
+ int cpu;
+ int r;
+};
+
+static u32 msrpm_ranges[] = {0, 0xc0000000, 0xc0010000};
+
+#define NUM_MSR_MAPS (sizeof(msrpm_ranges) / sizeof(*msrpm_ranges))
+#define MSRS_RANGE_SIZE 2048
+#define MSRS_IN_RANGE (MSRS_RANGE_SIZE * 8 / 2)
+
+#define MAX_INST_SIZE 15
+
+static unsigned get_addr_size(struct kvm_vcpu *vcpu)
+{
+ struct vmcb_save_area *sa = &vcpu->svm->vmcb->save;
+ u16 cs_attrib;
+
+ if (!(sa->cr0 & CR0_PE_MASK) || (sa->rflags & X86_EFLAGS_VM))
+ return 2;
+
+ cs_attrib = sa->cs.attrib;
+
+ return (cs_attrib & SVM_SELECTOR_L_MASK) ? 8 :
+ (cs_attrib & SVM_SELECTOR_DB_MASK) ? 4 : 2;
+}
+
+static inline u8 pop_irq(struct kvm_vcpu *vcpu)
+{
+ int word_index = __ffs(vcpu->irq_summary);
+ int bit_index = __ffs(vcpu->irq_pending[word_index]);
+ int irq = word_index * BITS_PER_LONG + bit_index;
+
+ clear_bit(bit_index, &vcpu->irq_pending[word_index]);
+ if (!vcpu->irq_pending[word_index])
+ clear_bit(word_index, &vcpu->irq_summary);
+ return irq;
+}
+
+static inline void push_irq(struct kvm_vcpu *vcpu, u8 irq)
+{
+ set_bit(irq, vcpu->irq_pending);
+ set_bit(irq / BITS_PER_LONG, &vcpu->irq_summary);
+}
+
+static inline void clgi(void)
+{
+ asm volatile (SVM_CLGI);
+}
+
+static inline void stgi(void)
+{
+ asm volatile (SVM_STGI);
+}
+
+static inline void invlpga(unsigned long addr, u32 asid)
+{
+ asm volatile (SVM_INVLPGA :: "a"(addr), "c"(asid));
+}
+
+static inline unsigned long kvm_read_cr2(void)
+{
+ unsigned long cr2;
+
+ asm volatile ("mov %%cr2, %0" : "=r" (cr2));
+ return cr2;
+}
+
+static inline void kvm_write_cr2(unsigned long val)
+{
+ asm volatile ("mov %0, %%cr2" :: "r" (val));
+}
+
+static inline unsigned long read_dr6(void)
+{
+ unsigned long dr6;
+
+ asm volatile ("mov %%dr6, %0" : "=r" (dr6));
+ return dr6;
+}
+
+static inline void write_dr6(unsigned long val)
+{
+ asm volatile ("mov %0, %%dr6" :: "r" (val));
+}
+
+static inline unsigned long read_dr7(void)
+{
+ unsigned long dr7;
+
+ asm volatile ("mov %%dr7, %0" : "=r" (dr7));
+ return dr7;
+}
+
+static inline void write_dr7(unsigned long val)
+{
+ asm volatile ("mov %0, %%dr7" :: "r" (val));
+}
+
+static inline int svm_is_long_mode(struct kvm_vcpu *vcpu)
+{
+ return vcpu->svm->vmcb->save.efer & KVM_EFER_LMA;
+}
+
+static inline void force_new_asid(struct kvm_vcpu *vcpu)
+{
+ vcpu->svm->asid_generation--;
+}
+
+static inline void flush_guest_tlb(struct kvm_vcpu *vcpu)
+{
+ force_new_asid(vcpu);
+}
+
+static void svm_set_efer(struct kvm_vcpu *vcpu, u64 efer)
+{
+ if (!(efer & KVM_EFER_LMA))
+ efer &= ~KVM_EFER_LME;
+
+ vcpu->svm->vmcb->save.efer = efer | MSR_EFER_SVME_MASK;
+ vcpu->shadow_efer = efer;
+}
+
+static void svm_inject_gp(struct kvm_vcpu *vcpu, unsigned error_code)
+{
+ vcpu->svm->vmcb->control.event_inj = SVM_EVTINJ_VALID |
+ SVM_EVTINJ_VALID_ERR |
+ SVM_EVTINJ_TYPE_EXEPT |
+ GP_VECTOR;
+ vcpu->svm->vmcb->control.event_inj_err = error_code;
+}
+
+static void inject_ud(struct kvm_vcpu *vcpu)
+{
+ vcpu->svm->vmcb->control.event_inj = SVM_EVTINJ_VALID |
+ SVM_EVTINJ_TYPE_EXEPT |
+ UD_VECTOR;
+}
+
+static void inject_db(struct kvm_vcpu *vcpu)
+{
+ vcpu->svm->vmcb->control.event_inj = SVM_EVTINJ_VALID |
+ SVM_EVTINJ_TYPE_EXEPT |
+ DB_VECTOR;
+}
+
+static int is_page_fault(uint32_t info)
+{
+ info &= SVM_EVTINJ_VEC_MASK | SVM_EVTINJ_TYPE_MASK | SVM_EVTINJ_VALID;
+ return info == (PF_VECTOR | SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_EXEPT);
+}
+
+static int is_external_interrupt(u32 info)
+{
+ info &= SVM_EVTINJ_TYPE_MASK | SVM_EVTINJ_VALID;
+ return info == (SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR);
+}
+
+static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
+{
+ if (!vcpu->svm->next_rip) {
+ printk(KERN_DEBUG "%s: NOP\n", __FUNCTION__);
+ return;
+ }
+ if (vcpu->svm->next_rip - vcpu->svm->vmcb->save.rip > 15) {
+ printk(KERN_ERR "%s: ip 0x%llx next 0x%llx\n",
+ __FUNCTION__,
+ vcpu->svm->vmcb->save.rip,
+ vcpu->svm->next_rip);
+ }
+
+ vcpu->rip = vcpu->svm->vmcb->save.rip = vcpu->svm->next_rip;
+ vcpu->svm->vmcb->control.int_state &= ~SVM_INTERRUPT_SHADOW_MASK;
+}
+
+static int has_svm(void)
+{
+ uint32_t eax, ebx, ecx, edx;
+
+ if (current_cpu_data.x86_vendor != X86_VENDOR_AMD) {
+ printk(KERN_INFO "has_svm: not amd\n");
+ return 0;
+ }
+
+ cpuid(0x80000000, &eax, &ebx, &ecx, &edx);
+ if (eax < SVM_CPUID_FUNC) {
+ printk(KERN_INFO "has_svm: can't execute cpuid_8000000a\n");
+ return 0;
+ }
+
+ cpuid(0x80000001, &eax, &ebx, &ecx, &edx);
+ if (!(ecx & (1 << SVM_CPUID_FEATURE_SHIFT))) {
+ printk(KERN_DEBUG "has_svm: svm not available\n");
+ return 0;
+ }
+ return 1;
+}
+
+static void svm_hardware_disable(void *garbage)
+{
+ struct svm_cpu_data *svm_data
+ = per_cpu(svm_data, raw_smp_processor_id());
+
+ if (svm_data) {
+ uint64_t efer;
+
+ wrmsrl(MSR_VM_HSAVE_PA, 0);
+ rdmsrl(MSR_EFER, efer);
+ wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
+ per_cpu(svm_data, raw_smp_processor_id()) = 0;
+ __free_page(svm_data->save_area);
+ kfree(svm_data);
+ }
+}
+
+static void svm_hardware_enable(void *garbage)
+{
+
+ struct svm_cpu_data *svm_data;
+ uint64_t efer;
+#ifdef CONFIG_X86_64
+ struct desc_ptr gdt_descr;
+#else
+ struct Xgt_desc_struct gdt_descr;
+#endif
+ struct desc_struct *gdt;
+ int me = raw_smp_processor_id();
+
+ if (!has_svm()) {
+ printk(KERN_ERR "svm_cpu_init: err EOPNOTSUPP on %d\n", me);
+ return;
+ }
+ svm_data = per_cpu(svm_data, me);
+
+ if (!svm_data) {
+ printk(KERN_ERR "svm_cpu_init: svm_data is NULL on %d\n",
+ me);
+ return;
+ }
+
+ svm_data->asid_generation = 1;
+ svm_data->max_asid = cpuid_ebx(SVM_CPUID_FUNC) - 1;
+ svm_data->next_asid = svm_data->max_asid + 1;
+
+ asm volatile ( "sgdt %0" : "=m"(gdt_descr) );
+ gdt = (struct desc_struct *)gdt_descr.address;
+ svm_data->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS);
+
+ rdmsrl(MSR_EFER, efer);
+ wrmsrl(MSR_EFER, efer | MSR_EFER_SVME_MASK);
+
+ wrmsrl(MSR_VM_HSAVE_PA,
+ page_to_pfn(svm_data->save_area) << PAGE_SHIFT);
+}
+
+static int svm_cpu_init(int cpu)
+{
+ struct svm_cpu_data *svm_data;
+ int r;
+
+ svm_data = kzalloc(sizeof(struct svm_cpu_data), GFP_KERNEL);
+ if (!svm_data)
+ return -ENOMEM;
+ svm_data->cpu = cpu;
+ svm_data->save_area = alloc_page(GFP_KERNEL);
+ r = -ENOMEM;
+ if (!svm_data->save_area)
+ goto err_1;
+
+ per_cpu(svm_data, cpu) = svm_data;
+
+ return 0;
+
+err_1:
+ kfree(svm_data);
+ return r;
+
+}
+
+static int set_msr_interception(u32 *msrpm, unsigned msr,
+ int read, int write)
+{
+ int i;
+
+ for (i = 0; i < NUM_MSR_MAPS; i++) {
+ if (msr >= msrpm_ranges[i] &&
+ msr < msrpm_ranges[i] + MSRS_IN_RANGE) {
+ u32 msr_offset = (i * MSRS_IN_RANGE + msr -
+ msrpm_ranges[i]) * 2;
+
+ u32 *base = msrpm + (msr_offset / 32);
+ u32 msr_shift = msr_offset % 32;
+ u32 mask = ((write) ? 0 : 2) | ((read) ? 0 : 1);
+ *base = (*base & ~(0x3 << msr_shift)) |
+ (mask << msr_shift);
+ return 1;
+ }
+ }
+ printk(KERN_DEBUG "%s: not found 0x%x\n", __FUNCTION__, msr);
+ return 0;
+}
+
+static __init int svm_hardware_setup(void)
+{
+ int cpu;
+ struct page *iopm_pages;
+ struct page *msrpm_pages;
+ void *msrpm_va;
+ int r;
+
+ kvm_emulator_want_group7_invlpg();
+
+ iopm_pages = alloc_pages(GFP_KERNEL, IOPM_ALLOC_ORDER);
+
+ if (!iopm_pages)
+ return -ENOMEM;
+ memset(page_address(iopm_pages), 0xff,
+ PAGE_SIZE * (1 << IOPM_ALLOC_ORDER));
+ iopm_base = page_to_pfn(iopm_pages) << PAGE_SHIFT;
+
+
+ msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
+
+ r = -ENOMEM;
+ if (!msrpm_pages)
+ goto err_1;
+
+ msrpm_va = page_address(msrpm_pages);
+ memset(msrpm_va, 0xff, PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER));
+ msrpm_base = page_to_pfn(msrpm_pages) << PAGE_SHIFT;
+
+#ifdef CONFIG_X86_64
+ set_msr_interception(msrpm_va, MSR_GS_BASE, 1, 1);
+ set_msr_interception(msrpm_va, MSR_FS_BASE, 1, 1);
+ set_msr_interception(msrpm_va, MSR_KERNEL_GS_BASE, 1, 1);
+ set_msr_interception(msrpm_va, MSR_STAR, 1, 1);
+ set_msr_interception(msrpm_va, MSR_LSTAR, 1, 1);
+ set_msr_interception(msrpm_va, MSR_CSTAR, 1, 1);
+ set_msr_interception(msrpm_va, MSR_SYSCALL_MASK, 1, 1);
+#endif
+ set_msr_interception(msrpm_va, MSR_IA32_SYSENTER_CS, 1, 1);
+ set_msr_interception(msrpm_va, MSR_IA32_SYSENTER_ESP, 1, 1);
+ set_msr_interception(msrpm_va, MSR_IA32_SYSENTER_EIP, 1, 1);
+
+ for_each_online_cpu(cpu) {
+ r = svm_cpu_init(cpu);
+ if (r)
+ goto err_2;
+ }
+ return 0;
+
+err_2:
+ __free_pages(msrpm_pages, MSRPM_ALLOC_ORDER);
+ msrpm_base = 0;
+err_1:
+ __free_pages(iopm_pages, IOPM_ALLOC_ORDER);
+ iopm_base = 0;
+ return r;
+}
+
+static __exit void svm_hardware_unsetup(void)
+{
+ __free_pages(pfn_to_page(msrpm_base >> PAGE_SHIFT), MSRPM_ALLOC_ORDER);
+ __free_pages(pfn_to_page(iopm_base >> PAGE_SHIFT), IOPM_ALLOC_ORDER);
+ iopm_base = msrpm_base = 0;
+}
+
+static void init_seg(struct vmcb_seg *seg)
+{
+ seg->selector = 0;
+ seg->attrib = SVM_SELECTOR_P_MASK | SVM_SELECTOR_S_MASK |
+ SVM_SELECTOR_WRITE_MASK; /* Read/Write Data Segment */
+ seg->limit = 0xffff;
+ seg->base = 0;
+}
+
+static void init_sys_seg(struct vmcb_seg *seg, uint32_t type)
+{
+ seg->selector = 0;
+ seg->attrib = SVM_SELECTOR_P_MASK | type;
+ seg->limit = 0xffff;
+ seg->base = 0;
+}
+
+static int svm_vcpu_setup(struct kvm_vcpu *vcpu)
+{
+ return 0;
+}
+
+static void init_vmcb(struct vmcb *vmcb)
+{
+ struct vmcb_control_area *control = &vmcb->control;
+ struct vmcb_save_area *save = &vmcb->save;
+ u64 tsc;
+
+ control->intercept_cr_read = INTERCEPT_CR0_MASK |
+ INTERCEPT_CR3_MASK |
+ INTERCEPT_CR4_MASK;
+
+ control->intercept_cr_write = INTERCEPT_CR0_MASK |
+ INTERCEPT_CR3_MASK |
+ INTERCEPT_CR4_MASK;
+
+ control->intercept_dr_read = INTERCEPT_DR0_MASK |
+ INTERCEPT_DR1_MASK |
+ INTERCEPT_DR2_MASK |
+ INTERCEPT_DR3_MASK;
+
+ control->intercept_dr_write = INTERCEPT_DR0_MASK |
+ INTERCEPT_DR1_MASK |
+ INTERCEPT_DR2_MASK |
+ INTERCEPT_DR3_MASK |
+ INTERCEPT_DR5_MASK |
+ INTERCEPT_DR7_MASK;
+
+ control->intercept_exceptions = 1 << PF_VECTOR;
+
+
+ control->intercept = (1ULL << INTERCEPT_INTR) |
+ (1ULL << INTERCEPT_NMI) |
+ /*
+ * selective cr0 intercept bug?
+ * 0: 0f 22 d8 mov %eax,%cr3
+ * 3: 0f 20 c0 mov %cr0,%eax
+ * 6: 0d 00 00 00 80 or $0x80000000,%eax
+ * b: 0f 22 c0 mov %eax,%cr0
+ * set cr3 ->interception
+ * get cr0 ->interception
+ * set cr0 -> no interception
+ */
+ /* (1ULL << INTERCEPT_SELECTIVE_CR0) | */
+ (1ULL << INTERCEPT_CPUID) |
+ (1ULL << INTERCEPT_HLT) |
+ (1ULL << INTERCEPT_INVLPG) |
+ (1ULL << INTERCEPT_INVLPGA) |
+ (1ULL << INTERCEPT_IOIO_PROT) |
+ (1ULL << INTERCEPT_MSR_PROT) |
+ (1ULL << INTERCEPT_TASK_SWITCH) |
+ (1ULL << INTERCEPT_VMRUN) |
+ (1ULL << INTERCEPT_VMMCALL) |
+ (1ULL << INTERCEPT_VMLOAD) |
+ (1ULL << INTERCEPT_VMSAVE) |
+ (1ULL << INTERCEPT_STGI) |
+ (1ULL << INTERCEPT_CLGI) |
+ (1ULL << INTERCEPT_SKINIT);
+
+ control->iopm_base_pa = iopm_base;
+ control->msrpm_base_pa = msrpm_base;
+ rdtscll(tsc);
+ control->tsc_offset = -tsc;
+ control->int_ctl = V_INTR_MASKING_MASK;
+
+ init_seg(&save->es);
+ init_seg(&save->ss);
+ init_seg(&save->ds);
+ init_seg(&save->fs);
+ init_seg(&save->gs);
+
+ save->cs.selector = 0xf000;
+ /* Executable/Readable Code Segment */
+ save->cs.attrib = SVM_SELECTOR_READ_MASK | SVM_SELECTOR_P_MASK |
+ SVM_SELECTOR_S_MASK | SVM_SELECTOR_CODE_MASK;
+ save->cs.limit = 0xffff;
+ save->cs.base = 0xffff0000;
+
+ save->gdtr.limit = 0xffff;
+ save->idtr.limit = 0xffff;
+
+ init_sys_seg(&save->ldtr, SEG_TYPE_LDT);
+ init_sys_seg(&save->tr, SEG_TYPE_BUSY_TSS16);
+
+ save->efer = MSR_EFER_SVME_MASK;
+
+ save->dr6 = 0xffff0ff0;
+ save->dr7 = 0x400;
+ save->rflags = 2;
+ save->rip = 0x0000fff0;
+
+ /*
+ * cr0 val on cpu init should be 0x60000010, we enable cpu
+ * cache by default. the orderly way is to enable cache in bios.
+ */
+ save->cr0 = 0x00000010 | CR0_PG_MASK;
+ save->cr4 = CR4_PAE_MASK;
+ /* rdx = ?? */
+}
+
+static int svm_create_vcpu(struct kvm_vcpu *vcpu)
+{
+ struct page *page;
+ int r;
+
+ r = -ENOMEM;
+ vcpu->svm = kzalloc(sizeof *vcpu->svm, GFP_KERNEL);
+ if (!vcpu->svm)
+ goto out1;
+ page = alloc_page(GFP_KERNEL);
+ if (!page)
+ goto out2;
+
+ vcpu->svm->vmcb = page_address(page);
+ memset(vcpu->svm->vmcb, 0, PAGE_SIZE);
+ vcpu->svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT;
+ vcpu->svm->cr0 = 0x00000010;
+ vcpu->svm->asid_generation = 0;
+ memset(vcpu->svm->db_regs, 0, sizeof(vcpu->svm->db_regs));
+ init_vmcb(vcpu->svm->vmcb);
+
+ return 0;
+
+out2:
+ kfree(vcpu->svm);
+out1:
+ return r;
+}
+
+static void svm_free_vcpu(struct kvm_vcpu *vcpu)
+{
+ if (!vcpu->svm)
+ return;
+ if (vcpu->svm->vmcb)
+ __free_page(pfn_to_page(vcpu->svm->vmcb_pa >> PAGE_SHIFT));
+ kfree(vcpu->svm);
+}
+
+static struct kvm_vcpu *svm_vcpu_load(struct kvm_vcpu *vcpu)
+{
+ get_cpu();
+ return vcpu;
+}
+
+static void svm_vcpu_put(struct kvm_vcpu *vcpu)
+{
+ put_cpu();
+}
+
+static void svm_cache_regs(struct kvm_vcpu *vcpu)
+{
+ vcpu->regs[VCPU_REGS_RAX] = vcpu->svm->vmcb->save.rax;
+ vcpu->regs[VCPU_REGS_RSP] = vcpu->svm->vmcb->save.rsp;
+ vcpu->rip = vcpu->svm->vmcb->save.rip;
+}
+
+static void svm_decache_regs(struct kvm_vcpu *vcpu)
+{
+ vcpu->svm->vmcb->save.rax = vcpu->regs[VCPU_REGS_RAX];
+ vcpu->svm->vmcb->save.rsp = vcpu->regs[VCPU_REGS_RSP];
+ vcpu->svm->vmcb->save.rip = vcpu->rip;
+}
+
+static unsigned long svm_get_rflags(struct kvm_vcpu *vcpu)
+{
+ return vcpu->svm->vmcb->save.rflags;
+}
+
+static void svm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
+{
+ vcpu->svm->vmcb->save.rflags = rflags;
+}
+
+static struct vmcb_seg *svm_seg(struct kvm_vcpu *vcpu, int seg)
+{
+ struct vmcb_save_area *save = &vcpu->svm->vmcb->save;
+
+ switch (seg) {
+ case VCPU_SREG_CS: return &save->cs;
+ case VCPU_SREG_DS: return &save->ds;
+ case VCPU_SREG_ES: return &save->es;
+ case VCPU_SREG_FS: return &save->fs;
+ case VCPU_SREG_GS: return &save->gs;
+ case VCPU_SREG_SS: return &save->ss;
+ case VCPU_SREG_TR: return &save->tr;
+ case VCPU_SREG_LDTR: return &save->ldtr;
+ }
+ BUG();
+ return 0;
+}
+
+static u64 svm_get_segment_base(struct kvm_vcpu *vcpu, int seg)
+{
+ struct vmcb_seg *s = svm_seg(vcpu, seg);
+
+ return s->base;
+}
+
+static void svm_get_segment(struct kvm_vcpu *vcpu,
+ struct kvm_segment *var, int seg)
+{
+ struct vmcb_seg *s = svm_seg(vcpu, seg);
+
+ var->base = s->base;
+ var->limit = s->limit;
+ var->selector = s->selector;
+ var->type = s->attrib & SVM_SELECTOR_TYPE_MASK;
+ var->s = (s->attrib >> SVM_SELECTOR_S_SHIFT) & 1;
+ var->dpl = (s->attrib >> SVM_SELECTOR_DPL_SHIFT) & 3;
+ var->present = (s->attrib >> SVM_SELECTOR_P_SHIFT) & 1;
+ var->avl = (s->attrib >> SVM_SELECTOR_AVL_SHIFT) & 1;
+ var->l = (s->attrib >> SVM_SELECTOR_L_SHIFT) & 1;
+ var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1;
+ var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1;
+ var->unusable = !var->present;
+}
+
+static void svm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
+{
+ struct vmcb_seg *s = svm_seg(vcpu, VCPU_SREG_CS);
+
+ *db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1;
+ *l = (s->attrib >> SVM_SELECTOR_L_SHIFT) & 1;
+}
+
+static void svm_get_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+{
+ dt->limit = vcpu->svm->vmcb->save.ldtr.limit;
+ dt->base = vcpu->svm->vmcb->save.ldtr.base;
+}
+
+static void svm_set_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+{
+ vcpu->svm->vmcb->save.ldtr.limit = dt->limit;
+ vcpu->svm->vmcb->save.ldtr.base = dt->base ;
+}
+
+static void svm_get_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+{
+ dt->limit = vcpu->svm->vmcb->save.gdtr.limit;
+ dt->base = vcpu->svm->vmcb->save.gdtr.base;
+}
+
+static void svm_set_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+{
+ vcpu->svm->vmcb->save.gdtr.limit = dt->limit;
+ vcpu->svm->vmcb->save.gdtr.base = dt->base ;
+}
+
+static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
+{
+#ifdef CONFIG_X86_64
+ if (vcpu->shadow_efer & KVM_EFER_LME) {
+ if (!is_paging(vcpu) && (cr0 & CR0_PG_MASK)) {
+ vcpu->shadow_efer |= KVM_EFER_LMA;
+ vcpu->svm->vmcb->save.efer |= KVM_EFER_LMA | KVM_EFER_LME;
+ }
+
+ if (is_paging(vcpu) && !(cr0 & CR0_PG_MASK) ) {
+ vcpu->shadow_efer &= ~KVM_EFER_LMA;
+ vcpu->svm->vmcb->save.efer &= ~(KVM_EFER_LMA | KVM_EFER_LME);
+ }
+ }
+#endif
+ vcpu->svm->cr0 = cr0;
+ vcpu->svm->vmcb->save.cr0 = cr0 | CR0_PG_MASK;
+ vcpu->cr0 = cr0;
+}
+
+static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+{
+ vcpu->cr4 = cr4;
+ vcpu->svm->vmcb->save.cr4 = cr4 | CR4_PAE_MASK;
+}
+
+static void svm_set_segment(struct kvm_vcpu *vcpu,
+ struct kvm_segment *var, int seg)
+{
+ struct vmcb_seg *s = svm_seg(vcpu, seg);
+
+ s->base = var->base;
+ s->limit = var->limit;
+ s->selector = var->selector;
+ if (var->unusable)
+ s->attrib = 0;
+ else {
+ s->attrib = (var->type & SVM_SELECTOR_TYPE_MASK);
+ s->attrib |= (var->s & 1) << SVM_SELECTOR_S_SHIFT;
+ s->attrib |= (var->dpl & 3) << SVM_SELECTOR_DPL_SHIFT;
+ s->attrib |= (var->present & 1) << SVM_SELECTOR_P_SHIFT;
+ s->attrib |= (var->avl & 1) << SVM_SELECTOR_AVL_SHIFT;
+ s->attrib |= (var->l & 1) << SVM_SELECTOR_L_SHIFT;
+ s->attrib |= (var->db & 1) << SVM_SELECTOR_DB_SHIFT;
+ s->attrib |= (var->g & 1) << SVM_SELECTOR_G_SHIFT;
+ }
+ if (seg == VCPU_SREG_CS)
+ vcpu->svm->vmcb->save.cpl
+ = (vcpu->svm->vmcb->save.cs.attrib
+ >> SVM_SELECTOR_DPL_SHIFT) & 3;
+
+}
+
+/* FIXME:
+
+ vcpu->svm->vmcb->control.int_ctl &= ~V_TPR_MASK;
+ vcpu->svm->vmcb->control.int_ctl |= (sregs->cr8 & V_TPR_MASK);
+
+*/
+
+static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_debug_guest *dbg)
+{
+ return -EOPNOTSUPP;
+}
+
+static void load_host_msrs(struct kvm_vcpu *vcpu)
+{
+ int i;
+
+ for ( i = 0; i < NR_HOST_SAVE_MSRS; i++)
+ wrmsrl(host_save_msrs[i], vcpu->svm->host_msrs[i]);
+}
+
+static void save_host_msrs(struct kvm_vcpu *vcpu)
+{
+ int i;
+
+ for ( i = 0; i < NR_HOST_SAVE_MSRS; i++)
+ rdmsrl(host_save_msrs[i], vcpu->svm->host_msrs[i]);
+}
+
+static void new_asid(struct kvm_vcpu *vcpu, struct svm_cpu_data *svm_data)
+{
+ if (svm_data->next_asid > svm_data->max_asid) {
+ ++svm_data->asid_generation;
+ svm_data->next_asid = 1;
+ vcpu->svm->vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID;
+ }
+
+ vcpu->cpu = svm_data->cpu;
+ vcpu->svm->asid_generation = svm_data->asid_generation;
+ vcpu->svm->vmcb->control.asid = svm_data->next_asid++;
+}
+
+static void svm_invlpg(struct kvm_vcpu *vcpu, gva_t address)
+{
+ invlpga(address, vcpu->svm->vmcb->control.asid); // is needed?
+}
+
+static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr)
+{
+ return vcpu->svm->db_regs[dr];
+}
+
+static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
+ int *exception)
+{
+ *exception = 0;
+
+ if (vcpu->svm->vmcb->save.dr7 & DR7_GD_MASK) {
+ vcpu->svm->vmcb->save.dr7 &= ~DR7_GD_MASK;
+ vcpu->svm->vmcb->save.dr6 |= DR6_BD_MASK;
+ *exception = DB_VECTOR;
+ return;
+ }
+
+ switch (dr) {
+ case 0 ... 3:
+ vcpu->svm->db_regs[dr] = value;
+ return;
+ case 4 ... 5:
+ if (vcpu->cr4 & CR4_DE_MASK) {
+ *exception = UD_VECTOR;
+ return;
+ }
+ case 7: {
+ if (value & ~((1ULL << 32) - 1)) {
+ *exception = GP_VECTOR;
+ return;
+ }
+ vcpu->svm->vmcb->save.dr7 = value;
+ return;
+ }
+ default:
+ printk(KERN_DEBUG "%s: unexpected dr %u\n",
+ __FUNCTION__, dr);
+ *exception = UD_VECTOR;
+ return;
+ }
+}
+
+static int pf_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u32 exit_int_info = vcpu->svm->vmcb->control.exit_int_info;
+ u64 fault_address;
+ u32 error_code;
+ enum emulation_result er;
+
+ if (is_external_interrupt(exit_int_info))
+ push_irq(vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK);
+
+ spin_lock(&vcpu->kvm->lock);
+
+ fault_address = vcpu->svm->vmcb->control.exit_info_2;
+ error_code = vcpu->svm->vmcb->control.exit_info_1;
+ if (!vcpu->mmu.page_fault(vcpu, fault_address, error_code)) {
+ spin_unlock(&vcpu->kvm->lock);
+ return 1;
+ }
+ er = emulate_instruction(vcpu, kvm_run, fault_address, error_code);
+ spin_unlock(&vcpu->kvm->lock);
+
+ switch (er) {
+ case EMULATE_DONE:
+ return 1;
+ case EMULATE_DO_MMIO:
+ ++kvm_stat.mmio_exits;
+ kvm_run->exit_reason = KVM_EXIT_MMIO;
+ return 0;
+ case EMULATE_FAIL:
+ vcpu_printf(vcpu, "%s: emulate fail\n", __FUNCTION__);
+ break;
+ default:
+ BUG();
+ }
+
+ kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+ return 0;
+}
+
+static int io_get_override(struct kvm_vcpu *vcpu,
+ struct vmcb_seg **seg,
+ int *addr_override)
+{
+ u8 inst[MAX_INST_SIZE];
+ unsigned ins_length;
+ gva_t rip;
+ int i;
+
+ rip = vcpu->svm->vmcb->save.rip;
+ ins_length = vcpu->svm->next_rip - rip;
+ rip += vcpu->svm->vmcb->save.cs.base;
+
+ if (ins_length > MAX_INST_SIZE)
+ printk(KERN_DEBUG
+ "%s: inst length err, cs base 0x%llx rip 0x%llx "
+ "next rip 0x%llx ins_length %u\n",
+ __FUNCTION__,
+ vcpu->svm->vmcb->save.cs.base,
+ vcpu->svm->vmcb->save.rip,
+ vcpu->svm->vmcb->control.exit_info_2,
+ ins_length);
+
+ if (kvm_read_guest(vcpu, rip, ins_length, inst) != ins_length)
+ /* #PF */
+ return 0;
+
+ *addr_override = 0;
+ *seg = 0;
+ for (i = 0; i < ins_length; i++)
+ switch (inst[i]) {
+ case 0xf0:
+ case 0xf2:
+ case 0xf3:
+ case 0x66:
+ continue;
+ case 0x67:
+ *addr_override = 1;
+ continue;
+ case 0x2e:
+ *seg = &vcpu->svm->vmcb->save.cs;
+ continue;
+ case 0x36:
+ *seg = &vcpu->svm->vmcb->save.ss;
+ continue;
+ case 0x3e:
+ *seg = &vcpu->svm->vmcb->save.ds;
+ continue;
+ case 0x26:
+ *seg = &vcpu->svm->vmcb->save.es;
+ continue;
+ case 0x64:
+ *seg = &vcpu->svm->vmcb->save.fs;
+ continue;
+ case 0x65:
+ *seg = &vcpu->svm->vmcb->save.gs;
+ continue;
+ default:
+ return 1;
+ }
+ printk(KERN_DEBUG "%s: unexpected\n", __FUNCTION__);
+ return 0;
+}
+
+static unsigned long io_adress(struct kvm_vcpu *vcpu, int ins, u64 *address)
+{
+ unsigned long addr_mask;
+ unsigned long *reg;
+ struct vmcb_seg *seg;
+ int addr_override;
+ struct vmcb_save_area *save_area = &vcpu->svm->vmcb->save;
+ u16 cs_attrib = save_area->cs.attrib;
+ unsigned addr_size = get_addr_size(vcpu);
+
+ if (!io_get_override(vcpu, &seg, &addr_override))
+ return 0;
+
+ if (addr_override)
+ addr_size = (addr_size == 2) ? 4: (addr_size >> 1);
+
+ if (ins) {
+ reg = &vcpu->regs[VCPU_REGS_RDI];
+ seg = &vcpu->svm->vmcb->save.es;
+ } else {
+ reg = &vcpu->regs[VCPU_REGS_RSI];
+ seg = (seg) ? seg : &vcpu->svm->vmcb->save.ds;
+ }
+
+ addr_mask = ~0ULL >> (64 - (addr_size * 8));
+
+ if ((cs_attrib & SVM_SELECTOR_L_MASK) &&
+ !(vcpu->svm->vmcb->save.rflags & X86_EFLAGS_VM)) {
+ *address = (*reg & addr_mask);
+ return addr_mask;
+ }
+
+ if (!(seg->attrib & SVM_SELECTOR_P_SHIFT)) {
+ svm_inject_gp(vcpu, 0);
+ return 0;
+ }
+
+ *address = (*reg & addr_mask) + seg->base;
+ return addr_mask;
+}
+
+static int io_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u32 io_info = vcpu->svm->vmcb->control.exit_info_1; //address size bug?
+ int _in = io_info & SVM_IOIO_TYPE_MASK;
+
+ ++kvm_stat.io_exits;
+
+ vcpu->svm->next_rip = vcpu->svm->vmcb->control.exit_info_2;
+
+ kvm_run->exit_reason = KVM_EXIT_IO;
+ kvm_run->io.port = io_info >> 16;
+ kvm_run->io.direction = (_in) ? KVM_EXIT_IO_IN : KVM_EXIT_IO_OUT;
+ kvm_run->io.size = ((io_info & SVM_IOIO_SIZE_MASK) >> SVM_IOIO_SIZE_SHIFT);
+ kvm_run->io.string = (io_info & SVM_IOIO_STR_MASK) != 0;
+ kvm_run->io.rep = (io_info & SVM_IOIO_REP_MASK) != 0;
+
+ if (kvm_run->io.string) {
+ unsigned addr_mask;
+
+ addr_mask = io_adress(vcpu, _in, &kvm_run->io.address);
+ if (!addr_mask) {
+ printk(KERN_DEBUG "%s: get io address failed\n", __FUNCTION__);
+ return 1;
+ }
+
+ if (kvm_run->io.rep) {
+ kvm_run->io.count = vcpu->regs[VCPU_REGS_RCX] & addr_mask;
+ kvm_run->io.string_down = (vcpu->svm->vmcb->save.rflags
+ & X86_EFLAGS_DF) != 0;
+ }
+ } else {
+ kvm_run->io.value = vcpu->svm->vmcb->save.rax;
+ }
+ return 0;
+}
+
+
+static int nop_on_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ return 1;
+}
+
+static int halt_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ vcpu->svm->next_rip = vcpu->svm->vmcb->save.rip + 1;
+ skip_emulated_instruction(vcpu);
+ if (vcpu->irq_summary && (vcpu->svm->vmcb->save.rflags & X86_EFLAGS_IF))
+ return 1;
+
+ kvm_run->exit_reason = KVM_EXIT_HLT;
+ return 0;
+}
+
+static int invalid_op_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ inject_ud(vcpu);
+ return 1;
+}
+
+static int task_switch_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ printk(KERN_DEBUG "%s: task swiche is unsupported\n", __FUNCTION__);
+ kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+ return 0;
+}
+
+static int cpuid_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ vcpu->svm->next_rip = vcpu->svm->vmcb->save.rip + 2;
+ kvm_run->exit_reason = KVM_EXIT_CPUID;
+ return 0;
+}
+
+static int emulate_on_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ if (emulate_instruction(vcpu, 0, 0, 0) != EMULATE_DONE)
+ printk(KERN_ERR "%s: failed\n", __FUNCTION__);
+ return 1;
+}
+
+static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
+{
+ switch (ecx) {
+ case MSR_IA32_MC0_CTL:
+ case MSR_IA32_MCG_STATUS:
+ case MSR_IA32_MCG_CAP:
+ case MSR_IA32_MC0_MISC:
+ case MSR_IA32_MC0_MISC+4:
+ case MSR_IA32_MC0_MISC+8:
+ case MSR_IA32_MC0_MISC+12:
+ case MSR_IA32_MC0_MISC+16:
+ case MSR_IA32_UCODE_REV:
+ /* MTRR registers */
+ case 0xfe:
+ case 0x200 ... 0x2ff:
+ *data = 0;
+ break;
+ case MSR_IA32_TIME_STAMP_COUNTER: {
+ u64 tsc;
+
+ rdtscll(tsc);
+ *data = vcpu->svm->vmcb->control.tsc_offset + tsc;
+ break;
+ }
+ case MSR_EFER:
+ *data = vcpu->shadow_efer;
+ break;
+ case MSR_IA32_APICBASE:
+ *data = vcpu->apic_base;
+ break;
+#ifdef CONFIG_X86_64
+ case MSR_STAR:
+ *data = vcpu->svm->vmcb->save.star;
+ break;
+ case MSR_LSTAR:
+ *data = vcpu->svm->vmcb->save.lstar;
+ break;
+ case MSR_CSTAR:
+ *data = vcpu->svm->vmcb->save.cstar;
+ break;
+ case MSR_KERNEL_GS_BASE:
+ *data = vcpu->svm->vmcb->save.kernel_gs_base;
+ break;
+ case MSR_SYSCALL_MASK:
+ *data = vcpu->svm->vmcb->save.sfmask;
+ break;
+#endif
+ case MSR_IA32_SYSENTER_CS:
+ *data = vcpu->svm->vmcb->save.sysenter_cs;
+ break;
+ case MSR_IA32_SYSENTER_EIP:
+ *data = vcpu->svm->vmcb->save.sysenter_eip;
+ break;
+ case MSR_IA32_SYSENTER_ESP:
+ *data = vcpu->svm->vmcb->save.sysenter_esp;
+ break;
+ default:
+ printk(KERN_ERR "kvm: unhandled rdmsr: 0x%x\n", ecx);
+ return 1;
+ }
+ return 0;
+}
+
+static int rdmsr_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u32 ecx = vcpu->regs[VCPU_REGS_RCX];
+ u64 data;
+
+ if (svm_get_msr(vcpu, ecx, &data))
+ svm_inject_gp(vcpu, 0);
+ else {
+ vcpu->svm->vmcb->save.rax = data & 0xffffffff;
+ vcpu->regs[VCPU_REGS_RDX] = data >> 32;
+ vcpu->svm->next_rip = vcpu->svm->vmcb->save.rip + 2;
+ skip_emulated_instruction(vcpu);
+ }
+ return 1;
+}
+
+static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
+{
+ switch (ecx) {
+#ifdef CONFIG_X86_64
+ case MSR_EFER:
+ set_efer(vcpu, data);
+ break;
+#endif
+ case MSR_IA32_MC0_STATUS:
+ printk(KERN_WARNING "%s: MSR_IA32_MC0_STATUS 0x%llx, nop\n"
+ , __FUNCTION__, data);
+ break;
+ case MSR_IA32_TIME_STAMP_COUNTER: {
+ u64 tsc;
+
+ rdtscll(tsc);
+ vcpu->svm->vmcb->control.tsc_offset = data - tsc;
+ break;
+ }
+ case MSR_IA32_UCODE_REV:
+ case MSR_IA32_UCODE_WRITE:
+ case 0x200 ... 0x2ff: /* MTRRs */
+ break;
+ case MSR_IA32_APICBASE:
+ vcpu->apic_base = data;
+ break;
+#ifdef CONFIG_X86_64_
+ case MSR_STAR:
+ vcpu->svm->vmcb->save.star = data;
+ break;
+ case MSR_LSTAR:
+ vcpu->svm->vmcb->save.lstar = data;
+ break;
+ case MSR_CSTAR:
+ vcpu->svm->vmcb->save.cstar = data;
+ break;
+ case MSR_KERNEL_GS_BASE:
+ vcpu->svm->vmcb->save.kernel_gs_base = data;
+ break;
+ case MSR_SYSCALL_MASK:
+ vcpu->svm->vmcb->save.sfmask = data;
+ break;
+#endif
+ case MSR_IA32_SYSENTER_CS:
+ vcpu->svm->vmcb->save.sysenter_cs = data;
+ break;
+ case MSR_IA32_SYSENTER_EIP:
+ vcpu->svm->vmcb->save.sysenter_eip = data;
+ break;
+ case MSR_IA32_SYSENTER_ESP:
+ vcpu->svm->vmcb->save.sysenter_esp = data;
+ break;
+ default:
+ printk(KERN_ERR "kvm: unhandled wrmsr: %x\n", ecx);
+ return 1;
+ }
+ return 0;
+}
+
+static int wrmsr_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u32 ecx = vcpu->regs[VCPU_REGS_RCX];
+ u64 data = (vcpu->svm->vmcb->save.rax & -1u)
+ | ((u64)(vcpu->regs[VCPU_REGS_RDX] & -1u) << 32);
+ vcpu->svm->next_rip = vcpu->svm->vmcb->save.rip + 2;
+ if (svm_set_msr(vcpu, ecx, data))
+ svm_inject_gp(vcpu, 0);
+ else
+ skip_emulated_instruction(vcpu);
+ return 1;
+}
+
+static int msr_interception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ if (vcpu->svm->vmcb->control.exit_info_1)
+ return wrmsr_interception(vcpu, kvm_run);
+ else
+ return rdmsr_interception(vcpu, kvm_run);
+}
+
+static int (*svm_exit_handlers[])(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run) = {
+ [SVM_EXIT_READ_CR0] = emulate_on_interception,
+ [SVM_EXIT_READ_CR3] = emulate_on_interception,
+ [SVM_EXIT_READ_CR4] = emulate_on_interception,
+ /* for now: */
+ [SVM_EXIT_WRITE_CR0] = emulate_on_interception,
+ [SVM_EXIT_WRITE_CR3] = emulate_on_interception,
+ [SVM_EXIT_WRITE_CR4] = emulate_on_interception,
+ [SVM_EXIT_READ_DR0] = emulate_on_interception,
+ [SVM_EXIT_READ_DR1] = emulate_on_interception,
+ [SVM_EXIT_READ_DR2] = emulate_on_interception,
+ [SVM_EXIT_READ_DR3] = emulate_on_interception,
+ [SVM_EXIT_WRITE_DR0] = emulate_on_interception,
+ [SVM_EXIT_WRITE_DR1] = emulate_on_interception,
+ [SVM_EXIT_WRITE_DR2] = emulate_on_interception,
+ [SVM_EXIT_WRITE_DR3] = emulate_on_interception,
+ [SVM_EXIT_WRITE_DR5] = emulate_on_interception,
+ [SVM_EXIT_WRITE_DR7] = emulate_on_interception,
+ [SVM_EXIT_EXCP_BASE + PF_VECTOR] = pf_interception,
+ [SVM_EXIT_INTR] = nop_on_interception,
+ [SVM_EXIT_NMI] = nop_on_interception,
+ [SVM_EXIT_SMI] = nop_on_interception,
+ [SVM_EXIT_INIT] = nop_on_interception,
+ /* [SVM_EXIT_CR0_SEL_WRITE] = emulate_on_interception, */
+ [SVM_EXIT_CPUID] = cpuid_interception,
+ [SVM_EXIT_HLT] = halt_interception,
+ [SVM_EXIT_INVLPG] = emulate_on_interception,
+ [SVM_EXIT_INVLPGA] = invalid_op_interception,
+ [SVM_EXIT_IOIO] = io_interception,
+ [SVM_EXIT_MSR] = msr_interception,
+ [SVM_EXIT_TASK_SWITCH] = task_switch_interception,
+ [SVM_EXIT_VMRUN] = invalid_op_interception,
+ [SVM_EXIT_VMMCALL] = invalid_op_interception,
+ [SVM_EXIT_VMLOAD] = invalid_op_interception,
+ [SVM_EXIT_VMSAVE] = invalid_op_interception,
+ [SVM_EXIT_STGI] = invalid_op_interception,
+ [SVM_EXIT_CLGI] = invalid_op_interception,
+ [SVM_EXIT_SKINIT] = invalid_op_interception,
+};
+
+
+static int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u32 exit_code = vcpu->svm->vmcb->control.exit_code;
+
+ kvm_run->exit_type = KVM_EXIT_TYPE_VM_EXIT;
+
+ if (is_external_interrupt(vcpu->svm->vmcb->control.exit_int_info) &&
+ exit_code != SVM_EXIT_EXCP_BASE + PF_VECTOR)
+ printk(KERN_ERR "%s: unexpected exit_ini_info 0x%x "
+ "exit_code 0x%x\n",
+ __FUNCTION__, vcpu->svm->vmcb->control.exit_int_info,
+ exit_code);
+
+ if (exit_code >= sizeof(svm_exit_handlers) / sizeof(*svm_exit_handlers)
+ || svm_exit_handlers[exit_code] == 0) {
+ kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+ printk(KERN_ERR "%s: 0x%x @ 0x%llx cr0 0x%lx rflags 0x%llx\n",
+ __FUNCTION__,
+ exit_code,
+ vcpu->svm->vmcb->save.rip,
+ vcpu->cr0,
+ vcpu->svm->vmcb->save.rflags);
+ return 0;
+ }
+
+ return svm_exit_handlers[exit_code](vcpu, kvm_run);
+}
+
+static void reload_tss(struct kvm_vcpu *vcpu)
+{
+ int cpu = raw_smp_processor_id();
+
+ struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu);
+ svm_data->tss_desc->type = 9; //available 32/64-bit TSS
+ load_TR_desc();
+}
+
+static void pre_svm_run(struct kvm_vcpu *vcpu)
+{
+ int cpu = raw_smp_processor_id();
+
+ struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu);
+
+ vcpu->svm->vmcb->control.tlb_ctl = TLB_CONTROL_DO_NOTHING;
+ if (vcpu->cpu != cpu ||
+ vcpu->svm->asid_generation != svm_data->asid_generation)
+ new_asid(vcpu, svm_data);
+}
+
+
+static inline void kvm_try_inject_irq(struct kvm_vcpu *vcpu)
+{
+ struct vmcb_control_area *control;
+
+ if (!vcpu->irq_summary)
+ return;
+
+ control = &vcpu->svm->vmcb->control;
+
+ control->int_vector = pop_irq(vcpu);
+ control->int_ctl &= ~V_INTR_PRIO_MASK;
+ control->int_ctl |= V_IRQ_MASK |
+ ((/*control->int_vector >> 4*/ 0xf) << V_INTR_PRIO_SHIFT);
+}
+
+static void kvm_reput_irq(struct kvm_vcpu *vcpu)
+{
+ struct vmcb_control_area *control = &vcpu->svm->vmcb->control;
+
+ if (control->int_ctl & V_IRQ_MASK) {
+ control->int_ctl &= ~V_IRQ_MASK;
+ push_irq(vcpu, control->int_vector);
+ }
+}
+
+static void save_db_regs(unsigned long *db_regs)
+{
+ asm volatile ("mov %%dr0, %0" : "=r"(db_regs[0]));
+ asm volatile ("mov %%dr1, %0" : "=r"(db_regs[1]));
+ asm volatile ("mov %%dr2, %0" : "=r"(db_regs[2]));
+ asm volatile ("mov %%dr3, %0" : "=r"(db_regs[3]));
+}
+
+static void load_db_regs(unsigned long *db_regs)
+{
+ asm volatile ("mov %0, %%dr0" : : "r"(db_regs[0]));
+ asm volatile ("mov %0, %%dr1" : : "r"(db_regs[1]));
+ asm volatile ("mov %0, %%dr2" : : "r"(db_regs[2]));
+ asm volatile ("mov %0, %%dr3" : : "r"(db_regs[3]));
+}
+
+static int svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u16 fs_selector;
+ u16 gs_selector;
+ u16 ldt_selector;
+
+again:
+ kvm_try_inject_irq(vcpu);
+
+ clgi();
+
+ pre_svm_run(vcpu);
+
+ save_host_msrs(vcpu);
+ fs_selector = read_fs();
+ gs_selector = read_gs();
+ ldt_selector = read_ldt();
+ vcpu->svm->host_cr2 = kvm_read_cr2();
+ vcpu->svm->host_dr6 = read_dr6();
+ vcpu->svm->host_dr7 = read_dr7();
+ vcpu->svm->vmcb->save.cr2 = vcpu->cr2;
+
+ if (vcpu->svm->vmcb->save.dr7 & 0xff) {
+ write_dr7(0);
+ save_db_regs(vcpu->svm->host_db_regs);
+ load_db_regs(vcpu->svm->db_regs);
+ }
+ asm volatile (
+#ifdef CONFIG_X86_64
+ "push %%rbx; push %%rcx; push %%rdx;"
+ "push %%rsi; push %%rdi; push %%rbp;"
+ "push %%r8; push %%r9; push %%r10; push %%r11;"
+ "push %%r12; push %%r13; push %%r14; push %%r15;"
+#else
+ "push %%ebx; push %%ecx; push %%edx;"
+ "push %%esi; push %%edi; push %%ebp;"
+#endif
+
+#ifdef CONFIG_X86_64
+ "mov %c[rbx](%[vcpu]), %%rbx \n\t"
+ "mov %c[rcx](%[vcpu]), %%rcx \n\t"
+ "mov %c[rdx](%[vcpu]), %%rdx \n\t"
+ "mov %c[rsi](%[vcpu]), %%rsi \n\t"
+ "mov %c[rdi](%[vcpu]), %%rdi \n\t"
+ "mov %c[rbp](%[vcpu]), %%rbp \n\t"
+ "mov %c[r8](%[vcpu]), %%r8 \n\t"
+ "mov %c[r9](%[vcpu]), %%r9 \n\t"
+ "mov %c[r10](%[vcpu]), %%r10 \n\t"
+ "mov %c[r11](%[vcpu]), %%r11 \n\t"
+ "mov %c[r12](%[vcpu]), %%r12 \n\t"
+ "mov %c[r13](%[vcpu]), %%r13 \n\t"
+ "mov %c[r14](%[vcpu]), %%r14 \n\t"
+ "mov %c[r15](%[vcpu]), %%r15 \n\t"
+#else
+ "mov %c[rbx](%[vcpu]), %%ebx \n\t"
+ "mov %c[rcx](%[vcpu]), %%ecx \n\t"
+ "mov %c[rdx](%[vcpu]), %%edx \n\t"
+ "mov %c[rsi](%[vcpu]), %%esi \n\t"
+ "mov %c[rdi](%[vcpu]), %%edi \n\t"
+ "mov %c[rbp](%[vcpu]), %%ebp \n\t"
+#endif
+
+#ifdef CONFIG_X86_64
+ /* Enter guest mode */
+ "push %%rax \n\t"
+ "mov %c[svm](%[vcpu]), %%rax \n\t"
+ "mov %c[vmcb](%%rax), %%rax \n\t"
+ SVM_VMLOAD "\n\t"
+ SVM_VMRUN "\n\t"
+ SVM_VMSAVE "\n\t"
+ "pop %%rax \n\t"
+#else
+ /* Enter guest mode */
+ "push %%eax \n\t"
+ "mov %c[svm](%[vcpu]), %%eax \n\t"
+ "mov %c[vmcb](%%eax), %%eax \n\t"
+ SVM_VMLOAD "\n\t"
+ SVM_VMRUN "\n\t"
+ SVM_VMSAVE "\n\t"
+ "pop %%eax \n\t"
+#endif
+
+ /* Save guest registers, load host registers */
+#ifdef CONFIG_X86_64
+ "mov %%rbx, %c[rbx](%[vcpu]) \n\t"
+ "mov %%rcx, %c[rcx](%[vcpu]) \n\t"
+ "mov %%rdx, %c[rdx](%[vcpu]) \n\t"
+ "mov %%rsi, %c[rsi](%[vcpu]) \n\t"
+ "mov %%rdi, %c[rdi](%[vcpu]) \n\t"
+ "mov %%rbp, %c[rbp](%[vcpu]) \n\t"
+ "mov %%r8, %c[r8](%[vcpu]) \n\t"
+ "mov %%r9, %c[r9](%[vcpu]) \n\t"
+ "mov %%r10, %c[r10](%[vcpu]) \n\t"
+ "mov %%r11, %c[r11](%[vcpu]) \n\t"
+ "mov %%r12, %c[r12](%[vcpu]) \n\t"
+ "mov %%r13, %c[r13](%[vcpu]) \n\t"
+ "mov %%r14, %c[r14](%[vcpu]) \n\t"
+ "mov %%r15, %c[r15](%[vcpu]) \n\t"
+
+ "pop %%r15; pop %%r14; pop %%r13; pop %%r12;"
+ "pop %%r11; pop %%r10; pop %%r9; pop %%r8;"
+ "pop %%rbp; pop %%rdi; pop %%rsi;"
+ "pop %%rdx; pop %%rcx; pop %%rbx; \n\t"
+#else
+ "mov %%ebx, %c[rbx](%[vcpu]) \n\t"
+ "mov %%ecx, %c[rcx](%[vcpu]) \n\t"
+ "mov %%edx, %c[rdx](%[vcpu]) \n\t"
+ "mov %%esi, %c[rsi](%[vcpu]) \n\t"
+ "mov %%edi, %c[rdi](%[vcpu]) \n\t"
+ "mov %%ebp, %c[rbp](%[vcpu]) \n\t"
+
+ "pop %%ebp; pop %%edi; pop %%esi;"
+ "pop %%edx; pop %%ecx; pop %%ebx; \n\t"
+#endif
+ :
+ : [vcpu]"a"(vcpu),
+ [svm]"i"(offsetof(struct kvm_vcpu, svm)),
+ [vmcb]"i"(offsetof(struct vcpu_svm, vmcb_pa)),
+ [rbx]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RBX])),
+ [rcx]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RCX])),
+ [rdx]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RDX])),
+ [rsi]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RSI])),
+ [rdi]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RDI])),
+ [rbp]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RBP]))
+#ifdef CONFIG_X86_64
+ ,[r8 ]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R8 ])),
+ [r9 ]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R9 ])),
+ [r10]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R10])),
+ [r11]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R11])),
+ [r12]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R12])),
+ [r13]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R13])),
+ [r14]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R14])),
+ [r15]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R15]))
+#endif
+ : "cc", "memory" );
+
+ if ((vcpu->svm->vmcb->save.dr7 & 0xff))
+ load_db_regs(vcpu->svm->host_db_regs);
+
+ vcpu->cr2 = vcpu->svm->vmcb->save.cr2;
+
+ write_dr6(vcpu->svm->host_dr6);
+ write_dr7(vcpu->svm->host_dr7);
+ kvm_write_cr2(vcpu->svm->host_cr2);
+
+ load_fs(fs_selector);
+ load_gs(gs_selector);
+ load_ldt(ldt_selector);
+ load_host_msrs(vcpu);
+
+ reload_tss(vcpu);
+
+ stgi();
+
+ kvm_reput_irq(vcpu);
+
+ vcpu->svm->next_rip = 0;
+
+ if (vcpu->svm->vmcb->control.exit_code == SVM_EXIT_ERR) {
+ kvm_run->exit_type = KVM_EXIT_TYPE_FAIL_ENTRY;
+ kvm_run->exit_reason = vcpu->svm->vmcb->control.exit_code;
+ return 0;
+ }
+
+ if (handle_exit(vcpu, kvm_run)) {
+ if (signal_pending(current)) {
+ ++kvm_stat.signal_exits;
+ return -EINTR;
+ }
+ kvm_resched(vcpu);
+ goto again;
+ }
+ return 0;
+}
+
+static void svm_flush_tlb(struct kvm_vcpu *vcpu)
+{
+ force_new_asid(vcpu);
+}
+
+static void svm_set_cr3(struct kvm_vcpu *vcpu, unsigned long root)
+{
+ vcpu->svm->vmcb->save.cr3 = root;
+ force_new_asid(vcpu);
+}
+
+static void svm_inject_page_fault(struct kvm_vcpu *vcpu,
+ unsigned long addr,
+ uint32_t err_code)
+{
+ uint32_t exit_int_info = vcpu->svm->vmcb->control.exit_int_info;
+
+ ++kvm_stat.pf_guest;
+
+ if (is_page_fault(exit_int_info)) {
+
+ vcpu->svm->vmcb->control.event_inj_err = 0;
+ vcpu->svm->vmcb->control.event_inj = SVM_EVTINJ_VALID |
+ SVM_EVTINJ_VALID_ERR |
+ SVM_EVTINJ_TYPE_EXEPT |
+ DF_VECTOR;
+ return;
+ }
+ vcpu->cr2 = addr;
+ vcpu->svm->vmcb->save.cr2 = addr;
+ vcpu->svm->vmcb->control.event_inj = SVM_EVTINJ_VALID |
+ SVM_EVTINJ_VALID_ERR |
+ SVM_EVTINJ_TYPE_EXEPT |
+ PF_VECTOR;
+ vcpu->svm->vmcb->control.event_inj_err = err_code;
+}
+
+
+static int is_disabled(void)
+{
+ return 0;
+}
+
+static struct kvm_arch_ops svm_arch_ops = {
+ .cpu_has_kvm_support = has_svm,
+ .disabled_by_bios = is_disabled,
+ .hardware_setup = svm_hardware_setup,
+ .hardware_unsetup = svm_hardware_unsetup,
+ .hardware_enable = svm_hardware_enable,
+ .hardware_disable = svm_hardware_disable,
+
+ .vcpu_create = svm_create_vcpu,
+ .vcpu_free = svm_free_vcpu,
+
+ .vcpu_load = svm_vcpu_load,
+ .vcpu_put = svm_vcpu_put,
+
+ .set_guest_debug = svm_guest_debug,
+ .get_msr = svm_get_msr,
+ .set_msr = svm_set_msr,
+ .get_segment_base = svm_get_segment_base,
+ .get_segment = svm_get_segment,
+ .set_segment = svm_set_segment,
+ .is_long_mode = svm_is_long_mode,
+ .get_cs_db_l_bits = svm_get_cs_db_l_bits,
+ .set_cr0 = svm_set_cr0,
+ .set_cr0_no_modeswitch = svm_set_cr0,
+ .set_cr3 = svm_set_cr3,
+ .set_cr4 = svm_set_cr4,
+ .set_efer = svm_set_efer,
+ .get_idt = svm_get_idt,
+ .set_idt = svm_set_idt,
+ .get_gdt = svm_get_gdt,
+ .set_gdt = svm_set_gdt,
+ .get_dr = svm_get_dr,
+ .set_dr = svm_set_dr,
+ .cache_regs = svm_cache_regs,
+ .decache_regs = svm_decache_regs,
+ .get_rflags = svm_get_rflags,
+ .set_rflags = svm_set_rflags,
+
+ .invlpg = svm_invlpg,
+ .tlb_flush = svm_flush_tlb,
+ .inject_page_fault = svm_inject_page_fault,
+
+ .inject_gp = svm_inject_gp,
+
+ .run = svm_vcpu_run,
+ .skip_emulated_instruction = skip_emulated_instruction,
+ .vcpu_setup = svm_vcpu_setup,
+};
+
+static int __init svm_init(void)
+{
+ return kvm_init_arch(&svm_arch_ops, THIS_MODULE);
+}
+
+static void __exit svm_exit(void)
+{
+ kvm_exit_arch();
+}
+
+module_init(svm_init)
+module_exit(svm_exit)
--- /dev/null
+#ifndef __SVM_H
+#define __SVM_H
+
+enum {
+ INTERCEPT_INTR,
+ INTERCEPT_NMI,
+ INTERCEPT_SMI,
+ INTERCEPT_INIT,
+ INTERCEPT_VINTR,
+ INTERCEPT_SELECTIVE_CR0,
+ INTERCEPT_STORE_IDTR,
+ INTERCEPT_STORE_GDTR,
+ INTERCEPT_STORE_LDTR,
+ INTERCEPT_STORE_TR,
+ INTERCEPT_LOAD_IDTR,
+ INTERCEPT_LOAD_GDTR,
+ INTERCEPT_LOAD_LDTR,
+ INTERCEPT_LOAD_TR,
+ INTERCEPT_RDTSC,
+ INTERCEPT_RDPMC,
+ INTERCEPT_PUSHF,
+ INTERCEPT_POPF,
+ INTERCEPT_CPUID,
+ INTERCEPT_RSM,
+ INTERCEPT_IRET,
+ INTERCEPT_INTn,
+ INTERCEPT_INVD,
+ INTERCEPT_PAUSE,
+ INTERCEPT_HLT,
+ INTERCEPT_INVLPG,
+ INTERCEPT_INVLPGA,
+ INTERCEPT_IOIO_PROT,
+ INTERCEPT_MSR_PROT,
+ INTERCEPT_TASK_SWITCH,
+ INTERCEPT_FERR_FREEZE,
+ INTERCEPT_SHUTDOWN,
+ INTERCEPT_VMRUN,
+ INTERCEPT_VMMCALL,
+ INTERCEPT_VMLOAD,
+ INTERCEPT_VMSAVE,
+ INTERCEPT_STGI,
+ INTERCEPT_CLGI,
+ INTERCEPT_SKINIT,
+ INTERCEPT_RDTSCP,
+ INTERCEPT_ICEBP,
+ INTERCEPT_WBINVD,
+};
+
+
+struct __attribute__ ((__packed__)) vmcb_control_area {
+ u16 intercept_cr_read;
+ u16 intercept_cr_write;
+ u16 intercept_dr_read;
+ u16 intercept_dr_write;
+ u32 intercept_exceptions;
+ u64 intercept;
+ u8 reserved_1[44];
+ u64 iopm_base_pa;
+ u64 msrpm_base_pa;
+ u64 tsc_offset;
+ u32 asid;
+ u8 tlb_ctl;
+ u8 reserved_2[3];
+ u32 int_ctl;
+ u32 int_vector;
+ u32 int_state;
+ u8 reserved_3[4];
+ u32 exit_code;
+ u32 exit_code_hi;
+ u64 exit_info_1;
+ u64 exit_info_2;
+ u32 exit_int_info;
+ u32 exit_int_info_err;
+ u64 nested_ctl;
+ u8 reserved_4[16];
+ u32 event_inj;
+ u32 event_inj_err;
+ u64 nested_cr3;
+ u64 lbr_ctl;
+ u8 reserved_5[832];
+};
+
+
+#define TLB_CONTROL_DO_NOTHING 0
+#define TLB_CONTROL_FLUSH_ALL_ASID 1
+
+#define V_TPR_MASK 0x0f
+
+#define V_IRQ_SHIFT 8
+#define V_IRQ_MASK (1 << V_IRQ_SHIFT)
+
+#define V_INTR_PRIO_SHIFT 16
+#define V_INTR_PRIO_MASK (0x0f << V_INTR_PRIO_SHIFT)
+
+#define V_IGN_TPR_SHIFT 20
+#define V_IGN_TPR_MASK (1 << V_IGN_TPR_SHIFT)
+
+#define V_INTR_MASKING_SHIFT 24
+#define V_INTR_MASKING_MASK (1 << V_INTR_MASKING_SHIFT)
+
+#define SVM_INTERRUPT_SHADOW_MASK 1
+
+#define SVM_IOIO_STR_SHIFT 2
+#define SVM_IOIO_REP_SHIFT 3
+#define SVM_IOIO_SIZE_SHIFT 4
+#define SVM_IOIO_ASIZE_SHIFT 7
+
+#define SVM_IOIO_TYPE_MASK 1
+#define SVM_IOIO_STR_MASK (1 << SVM_IOIO_STR_SHIFT)
+#define SVM_IOIO_REP_MASK (1 << SVM_IOIO_REP_SHIFT)
+#define SVM_IOIO_SIZE_MASK (7 << SVM_IOIO_SIZE_SHIFT)
+#define SVM_IOIO_ASIZE_MASK (7 << SVM_IOIO_ASIZE_SHIFT)
+
+struct __attribute__ ((__packed__)) vmcb_seg {
+ u16 selector;
+ u16 attrib;
+ u32 limit;
+ u64 base;
+};
+
+struct __attribute__ ((__packed__)) vmcb_save_area {
+ struct vmcb_seg es;
+ struct vmcb_seg cs;
+ struct vmcb_seg ss;
+ struct vmcb_seg ds;
+ struct vmcb_seg fs;
+ struct vmcb_seg gs;
+ struct vmcb_seg gdtr;
+ struct vmcb_seg ldtr;
+ struct vmcb_seg idtr;
+ struct vmcb_seg tr;
+ u8 reserved_1[43];
+ u8 cpl;
+ u8 reserved_2[4];
+ u64 efer;
+ u8 reserved_3[112];
+ u64 cr4;
+ u64 cr3;
+ u64 cr0;
+ u64 dr7;
+ u64 dr6;
+ u64 rflags;
+ u64 rip;
+ u8 reserved_4[88];
+ u64 rsp;
+ u8 reserved_5[24];
+ u64 rax;
+ u64 star;
+ u64 lstar;
+ u64 cstar;
+ u64 sfmask;
+ u64 kernel_gs_base;
+ u64 sysenter_cs;
+ u64 sysenter_esp;
+ u64 sysenter_eip;
+ u64 cr2;
+ u8 reserved_6[32];
+ u64 g_pat;
+ u64 dbgctl;
+ u64 br_from;
+ u64 br_to;
+ u64 last_excp_from;
+ u64 last_excp_to;
+};
+
+struct __attribute__ ((__packed__)) vmcb {
+ struct vmcb_control_area control;
+ struct vmcb_save_area save;
+};
+
+#define SVM_CPUID_FEATURE_SHIFT 2
+#define SVM_CPUID_FUNC 0x8000000a
+
+#define MSR_EFER_SVME_MASK (1ULL << 12)
+#define MSR_VM_HSAVE_PA 0xc0010117ULL
+
+#define SVM_SELECTOR_S_SHIFT 4
+#define SVM_SELECTOR_DPL_SHIFT 5
+#define SVM_SELECTOR_P_SHIFT 7
+#define SVM_SELECTOR_AVL_SHIFT 8
+#define SVM_SELECTOR_L_SHIFT 9
+#define SVM_SELECTOR_DB_SHIFT 10
+#define SVM_SELECTOR_G_SHIFT 11
+
+#define SVM_SELECTOR_TYPE_MASK (0xf)
+#define SVM_SELECTOR_S_MASK (1 << SVM_SELECTOR_S_SHIFT)
+#define SVM_SELECTOR_DPL_MASK (3 << SVM_SELECTOR_DPL_SHIFT)
+#define SVM_SELECTOR_P_MASK (1 << SVM_SELECTOR_P_SHIFT)
+#define SVM_SELECTOR_AVL_MASK (1 << SVM_SELECTOR_AVL_SHIFT)
+#define SVM_SELECTOR_L_MASK (1 << SVM_SELECTOR_L_SHIFT)
+#define SVM_SELECTOR_DB_MASK (1 << SVM_SELECTOR_DB_SHIFT)
+#define SVM_SELECTOR_G_MASK (1 << SVM_SELECTOR_G_SHIFT)
+
+#define SVM_SELECTOR_WRITE_MASK (1 << 1)
+#define SVM_SELECTOR_READ_MASK SVM_SELECTOR_WRITE_MASK
+#define SVM_SELECTOR_CODE_MASK (1 << 3)
+
+#define INTERCEPT_CR0_MASK 1
+#define INTERCEPT_CR3_MASK (1 << 3)
+#define INTERCEPT_CR4_MASK (1 << 4)
+
+#define INTERCEPT_DR0_MASK 1
+#define INTERCEPT_DR1_MASK (1 << 1)
+#define INTERCEPT_DR2_MASK (1 << 2)
+#define INTERCEPT_DR3_MASK (1 << 3)
+#define INTERCEPT_DR4_MASK (1 << 4)
+#define INTERCEPT_DR5_MASK (1 << 5)
+#define INTERCEPT_DR6_MASK (1 << 6)
+#define INTERCEPT_DR7_MASK (1 << 7)
+
+#define SVM_EVTINJ_VEC_MASK 0xff
+
+#define SVM_EVTINJ_TYPE_SHIFT 8
+#define SVM_EVTINJ_TYPE_MASK (7 << SVM_EVTINJ_TYPE_SHIFT)
+
+#define SVM_EVTINJ_TYPE_INTR (0 << SVM_EVTINJ_TYPE_SHIFT)
+#define SVM_EVTINJ_TYPE_NMI (2 << SVM_EVTINJ_TYPE_SHIFT)
+#define SVM_EVTINJ_TYPE_EXEPT (3 << SVM_EVTINJ_TYPE_SHIFT)
+#define SVM_EVTINJ_TYPE_SOFT (4 << SVM_EVTINJ_TYPE_SHIFT)
+
+#define SVM_EVTINJ_VALID (1 << 31)
+#define SVM_EVTINJ_VALID_ERR (1 << 11)
+
+#define SVM_EXITINTINFO_VEC_MASK SVM_EVTINJ_VEC_MASK
+
+#define SVM_EXITINTINFO_TYPE_INTR SVM_EVTINJ_TYPE_INTR
+#define SVM_EXITINTINFO_TYPE_NMI SVM_EVTINJ_TYPE_NMI
+#define SVM_EXITINTINFO_TYPE_EXEPT SVM_EVTINJ_TYPE_EXEPT
+#define SVM_EXITINTINFO_TYPE_SOFT SVM_EVTINJ_TYPE_SOFT
+
+#define SVM_EXITINTINFO_VALID SVM_EVTINJ_VALID
+#define SVM_EXITINTINFO_VALID_ERR SVM_EVTINJ_VALID_ERR
+
+#define SVM_EXIT_READ_CR0 0x000
+#define SVM_EXIT_READ_CR3 0x003
+#define SVM_EXIT_READ_CR4 0x004
+#define SVM_EXIT_READ_CR8 0x008
+#define SVM_EXIT_WRITE_CR0 0x010
+#define SVM_EXIT_WRITE_CR3 0x013
+#define SVM_EXIT_WRITE_CR4 0x014
+#define SVM_EXIT_WRITE_CR8 0x018
+#define SVM_EXIT_READ_DR0 0x020
+#define SVM_EXIT_READ_DR1 0x021
+#define SVM_EXIT_READ_DR2 0x022
+#define SVM_EXIT_READ_DR3 0x023
+#define SVM_EXIT_READ_DR4 0x024
+#define SVM_EXIT_READ_DR5 0x025
+#define SVM_EXIT_READ_DR6 0x026
+#define SVM_EXIT_READ_DR7 0x027
+#define SVM_EXIT_WRITE_DR0 0x030
+#define SVM_EXIT_WRITE_DR1 0x031
+#define SVM_EXIT_WRITE_DR2 0x032
+#define SVM_EXIT_WRITE_DR3 0x033
+#define SVM_EXIT_WRITE_DR4 0x034
+#define SVM_EXIT_WRITE_DR5 0x035
+#define SVM_EXIT_WRITE_DR6 0x036
+#define SVM_EXIT_WRITE_DR7 0x037
+#define SVM_EXIT_EXCP_BASE 0x040
+#define SVM_EXIT_INTR 0x060
+#define SVM_EXIT_NMI 0x061
+#define SVM_EXIT_SMI 0x062
+#define SVM_EXIT_INIT 0x063
+#define SVM_EXIT_VINTR 0x064
+#define SVM_EXIT_CR0_SEL_WRITE 0x065
+#define SVM_EXIT_IDTR_READ 0x066
+#define SVM_EXIT_GDTR_READ 0x067
+#define SVM_EXIT_LDTR_READ 0x068
+#define SVM_EXIT_TR_READ 0x069
+#define SVM_EXIT_IDTR_WRITE 0x06a
+#define SVM_EXIT_GDTR_WRITE 0x06b
+#define SVM_EXIT_LDTR_WRITE 0x06c
+#define SVM_EXIT_TR_WRITE 0x06d
+#define SVM_EXIT_RDTSC 0x06e
+#define SVM_EXIT_RDPMC 0x06f
+#define SVM_EXIT_PUSHF 0x070
+#define SVM_EXIT_POPF 0x071
+#define SVM_EXIT_CPUID 0x072
+#define SVM_EXIT_RSM 0x073
+#define SVM_EXIT_IRET 0x074
+#define SVM_EXIT_SWINT 0x075
+#define SVM_EXIT_INVD 0x076
+#define SVM_EXIT_PAUSE 0x077
+#define SVM_EXIT_HLT 0x078
+#define SVM_EXIT_INVLPG 0x079
+#define SVM_EXIT_INVLPGA 0x07a
+#define SVM_EXIT_IOIO 0x07b
+#define SVM_EXIT_MSR 0x07c
+#define SVM_EXIT_TASK_SWITCH 0x07d
+#define SVM_EXIT_FERR_FREEZE 0x07e
+#define SVM_EXIT_SHUTDOWN 0x07f
+#define SVM_EXIT_VMRUN 0x080
+#define SVM_EXIT_VMMCALL 0x081
+#define SVM_EXIT_VMLOAD 0x082
+#define SVM_EXIT_VMSAVE 0x083
+#define SVM_EXIT_STGI 0x084
+#define SVM_EXIT_CLGI 0x085
+#define SVM_EXIT_SKINIT 0x086
+#define SVM_EXIT_RDTSCP 0x087
+#define SVM_EXIT_ICEBP 0x088
+#define SVM_EXIT_WBINVD 0x089
+#define SVM_EXIT_NPF 0x400
+
+#define SVM_EXIT_ERR -1
+
+#define SVM_CR0_SELECTIVE_MASK (1 << 3 | 1) // TS and MP
+
+#define SVM_VMLOAD ".byte 0x0f, 0x01, 0xda"
+#define SVM_VMRUN ".byte 0x0f, 0x01, 0xd8"
+#define SVM_VMSAVE ".byte 0x0f, 0x01, 0xdb"
+#define SVM_CLGI ".byte 0x0f, 0x01, 0xdd"
+#define SVM_STGI ".byte 0x0f, 0x01, 0xdc"
+#define SVM_INVLPGA ".byte 0x0f, 0x01, 0xdf"
+
+#endif
+
--- /dev/null
+/*
+ * Kernel-based Virtual Machine driver for Linux
+ *
+ * This module enables machines with Intel VT-x extensions to run virtual
+ * machines without emulation or binary translation.
+ *
+ * Copyright (C) 2006 Qumranet, Inc.
+ *
+ * Authors:
+ * Avi Kivity <avi@qumranet.com>
+ * Yaniv Kamay <yaniv@qumranet.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include "kvm.h"
+#include "vmx.h"
+#include "kvm_vmx.h"
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <asm/io.h>
+#include <asm/desc.h>
+
+#include "segment_descriptor.h"
+
+#define MSR_IA32_FEATURE_CONTROL 0x03a
+
+MODULE_AUTHOR("Qumranet");
+MODULE_LICENSE("GPL");
+
+static DEFINE_PER_CPU(struct vmcs *, vmxarea);
+static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
+
+#ifdef CONFIG_X86_64
+#define HOST_IS_64 1
+#else
+#define HOST_IS_64 0
+#endif
+
+static struct vmcs_descriptor {
+ int size;
+ int order;
+ u32 revision_id;
+} vmcs_descriptor;
+
+#define VMX_SEGMENT_FIELD(seg) \
+ [VCPU_SREG_##seg] = { \
+ .selector = GUEST_##seg##_SELECTOR, \
+ .base = GUEST_##seg##_BASE, \
+ .limit = GUEST_##seg##_LIMIT, \
+ .ar_bytes = GUEST_##seg##_AR_BYTES, \
+ }
+
+static struct kvm_vmx_segment_field {
+ unsigned selector;
+ unsigned base;
+ unsigned limit;
+ unsigned ar_bytes;
+} kvm_vmx_segment_fields[] = {
+ VMX_SEGMENT_FIELD(CS),
+ VMX_SEGMENT_FIELD(DS),
+ VMX_SEGMENT_FIELD(ES),
+ VMX_SEGMENT_FIELD(FS),
+ VMX_SEGMENT_FIELD(GS),
+ VMX_SEGMENT_FIELD(SS),
+ VMX_SEGMENT_FIELD(TR),
+ VMX_SEGMENT_FIELD(LDTR),
+};
+
+static const u32 vmx_msr_index[] = {
+#ifdef CONFIG_X86_64
+ MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR, MSR_KERNEL_GS_BASE,
+#endif
+ MSR_EFER, MSR_K6_STAR,
+};
+#define NR_VMX_MSR (sizeof(vmx_msr_index) / sizeof(*vmx_msr_index))
+
+static inline int is_page_fault(u32 intr_info)
+{
+ return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
+ INTR_INFO_VALID_MASK)) ==
+ (INTR_TYPE_EXCEPTION | PF_VECTOR | INTR_INFO_VALID_MASK);
+}
+
+static inline int is_external_interrupt(u32 intr_info)
+{
+ return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
+ == (INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
+}
+
+static struct vmx_msr_entry *find_msr_entry(struct kvm_vcpu *vcpu, u32 msr)
+{
+ int i;
+
+ for (i = 0; i < vcpu->nmsrs; ++i)
+ if (vcpu->guest_msrs[i].index == msr)
+ return &vcpu->guest_msrs[i];
+ return 0;
+}
+
+static void vmcs_clear(struct vmcs *vmcs)
+{
+ u64 phys_addr = __pa(vmcs);
+ u8 error;
+
+ asm volatile (ASM_VMX_VMCLEAR_RAX "; setna %0"
+ : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
+ : "cc", "memory");
+ if (error)
+ printk(KERN_ERR "kvm: vmclear fail: %p/%llx\n",
+ vmcs, phys_addr);
+}
+
+static void __vcpu_clear(void *arg)
+{
+ struct kvm_vcpu *vcpu = arg;
+ int cpu = smp_processor_id();
+
+ if (vcpu->cpu == cpu)
+ vmcs_clear(vcpu->vmcs);
+ if (per_cpu(current_vmcs, cpu) == vcpu->vmcs)
+ per_cpu(current_vmcs, cpu) = NULL;
+}
+
+static unsigned long vmcs_readl(unsigned long field)
+{
+ unsigned long value;
+
+ asm volatile (ASM_VMX_VMREAD_RDX_RAX
+ : "=a"(value) : "d"(field) : "cc");
+ return value;
+}
+
+static u16 vmcs_read16(unsigned long field)
+{
+ return vmcs_readl(field);
+}
+
+static u32 vmcs_read32(unsigned long field)
+{
+ return vmcs_readl(field);
+}
+
+static u64 vmcs_read64(unsigned long field)
+{
+#ifdef CONFIG_X86_64
+ return vmcs_readl(field);
+#else
+ return vmcs_readl(field) | ((u64)vmcs_readl(field+1) << 32);
+#endif
+}
+
+static void vmcs_writel(unsigned long field, unsigned long value)
+{
+ u8 error;
+
+ asm volatile (ASM_VMX_VMWRITE_RAX_RDX "; setna %0"
+ : "=q"(error) : "a"(value), "d"(field) : "cc" );
+ if (error)
+ printk(KERN_ERR "vmwrite error: reg %lx value %lx (err %d)\n",
+ field, value, vmcs_read32(VM_INSTRUCTION_ERROR));
+}
+
+static void vmcs_write16(unsigned long field, u16 value)
+{
+ vmcs_writel(field, value);
+}
+
+static void vmcs_write32(unsigned long field, u32 value)
+{
+ vmcs_writel(field, value);
+}
+
+static void vmcs_write64(unsigned long field, u64 value)
+{
+#ifdef CONFIG_X86_64
+ vmcs_writel(field, value);
+#else
+ vmcs_writel(field, value);
+ asm volatile ("");
+ vmcs_writel(field+1, value >> 32);
+#endif
+}
+
+/*
+ * Switches to specified vcpu, until a matching vcpu_put(), but assumes
+ * vcpu mutex is already taken.
+ */
+static struct kvm_vcpu *vmx_vcpu_load(struct kvm_vcpu *vcpu)
+{
+ u64 phys_addr = __pa(vcpu->vmcs);
+ int cpu;
+
+ cpu = get_cpu();
+
+ if (vcpu->cpu != cpu) {
+ smp_call_function(__vcpu_clear, vcpu, 0, 1);
+ vcpu->launched = 0;
+ }
+
+ if (per_cpu(current_vmcs, cpu) != vcpu->vmcs) {
+ u8 error;
+
+ per_cpu(current_vmcs, cpu) = vcpu->vmcs;
+ asm volatile (ASM_VMX_VMPTRLD_RAX "; setna %0"
+ : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
+ : "cc");
+ if (error)
+ printk(KERN_ERR "kvm: vmptrld %p/%llx fail\n",
+ vcpu->vmcs, phys_addr);
+ }
+
+ if (vcpu->cpu != cpu) {
+ struct descriptor_table dt;
+ unsigned long sysenter_esp;
+
+ vcpu->cpu = cpu;
+ /*
+ * Linux uses per-cpu TSS and GDT, so set these when switching
+ * processors.
+ */
+ vmcs_writel(HOST_TR_BASE, read_tr_base()); /* 22.2.4 */
+ get_gdt(&dt);
+ vmcs_writel(HOST_GDTR_BASE, dt.base); /* 22.2.4 */
+
+ rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp);
+ vmcs_writel(HOST_IA32_SYSENTER_ESP, sysenter_esp); /* 22.2.3 */
+ }
+ return vcpu;
+}
+
+static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
+{
+ put_cpu();
+}
+
+static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
+{
+ return vmcs_readl(GUEST_RFLAGS);
+}
+
+static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
+{
+ vmcs_writel(GUEST_RFLAGS, rflags);
+}
+
+static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
+{
+ unsigned long rip;
+ u32 interruptibility;
+
+ rip = vmcs_readl(GUEST_RIP);
+ rip += vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
+ vmcs_writel(GUEST_RIP, rip);
+
+ /*
+ * We emulated an instruction, so temporary interrupt blocking
+ * should be removed, if set.
+ */
+ interruptibility = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+ if (interruptibility & 3)
+ vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+ interruptibility & ~3);
+}
+
+static void vmx_inject_gp(struct kvm_vcpu *vcpu, unsigned error_code)
+{
+ printk(KERN_DEBUG "inject_general_protection: rip 0x%lx\n",
+ vmcs_readl(GUEST_RIP));
+ vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, error_code);
+ vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+ GP_VECTOR |
+ INTR_TYPE_EXCEPTION |
+ INTR_INFO_DELIEVER_CODE_MASK |
+ INTR_INFO_VALID_MASK);
+}
+
+/*
+ * reads and returns guest's timestamp counter "register"
+ * guest_tsc = host_tsc + tsc_offset -- 21.3
+ */
+static u64 guest_read_tsc(void)
+{
+ u64 host_tsc, tsc_offset;
+
+ rdtscll(host_tsc);
+ tsc_offset = vmcs_read64(TSC_OFFSET);
+ return host_tsc + tsc_offset;
+}
+
+/*
+ * writes 'guest_tsc' into guest's timestamp counter "register"
+ * guest_tsc = host_tsc + tsc_offset ==> tsc_offset = guest_tsc - host_tsc
+ */
+static void guest_write_tsc(u64 guest_tsc)
+{
+ u64 host_tsc;
+
+ rdtscll(host_tsc);
+ vmcs_write64(TSC_OFFSET, guest_tsc - host_tsc);
+}
+
+static void reload_tss(void)
+{
+#ifndef CONFIG_X86_64
+
+ /*
+ * VT restores TR but not its size. Useless.
+ */
+ struct descriptor_table gdt;
+ struct segment_descriptor *descs;
+
+ get_gdt(&gdt);
+ descs = (void *)gdt.base;
+ descs[GDT_ENTRY_TSS].type = 9; /* available TSS */
+ load_TR_desc();
+#endif
+}
+
+/*
+ * Reads an msr value (of 'msr_index') into 'pdata'.
+ * Returns 0 on success, non-0 otherwise.
+ * Assumes vcpu_load() was already called.
+ */
+static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
+{
+ u64 data;
+ struct vmx_msr_entry *msr;
+
+ if (!pdata) {
+ printk(KERN_ERR "BUG: get_msr called with NULL pdata\n");
+ return -EINVAL;
+ }
+
+ switch (msr_index) {
+#ifdef CONFIG_X86_64
+ case MSR_FS_BASE:
+ data = vmcs_readl(GUEST_FS_BASE);
+ break;
+ case MSR_GS_BASE:
+ data = vmcs_readl(GUEST_GS_BASE);
+ break;
+ case MSR_EFER:
+ data = vcpu->shadow_efer;
+ break;
+#endif
+ case MSR_IA32_TIME_STAMP_COUNTER:
+ data = guest_read_tsc();
+ break;
+ case MSR_IA32_SYSENTER_CS:
+ data = vmcs_read32(GUEST_SYSENTER_CS);
+ break;
+ case MSR_IA32_SYSENTER_EIP:
+ data = vmcs_read32(GUEST_SYSENTER_EIP);
+ break;
+ case MSR_IA32_SYSENTER_ESP:
+ data = vmcs_read32(GUEST_SYSENTER_ESP);
+ break;
+ case MSR_IA32_MC0_CTL:
+ case MSR_IA32_MCG_STATUS:
+ case MSR_IA32_MCG_CAP:
+ case MSR_IA32_MC0_MISC:
+ case MSR_IA32_MC0_MISC+4:
+ case MSR_IA32_MC0_MISC+8:
+ case MSR_IA32_MC0_MISC+12:
+ case MSR_IA32_MC0_MISC+16:
+ case MSR_IA32_UCODE_REV:
+ /* MTRR registers */
+ case 0xfe:
+ case 0x200 ... 0x2ff:
+ data = 0;
+ break;
+ case MSR_IA32_APICBASE:
+ data = vcpu->apic_base;
+ break;
+ default:
+ msr = find_msr_entry(vcpu, msr_index);
+ if (!msr) {
+ printk(KERN_ERR "kvm: unhandled rdmsr: %x\n", msr_index);
+ return 1;
+ }
+ data = msr->data;
+ break;
+ }
+
+ *pdata = data;
+ return 0;
+}
+
+/*
+ * Writes msr value into into the appropriate "register".
+ * Returns 0 on success, non-0 otherwise.
+ * Assumes vcpu_load() was already called.
+ */
+static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
+{
+ struct vmx_msr_entry *msr;
+ switch (msr_index) {
+#ifdef CONFIG_X86_64
+ case MSR_FS_BASE:
+ vmcs_writel(GUEST_FS_BASE, data);
+ break;
+ case MSR_GS_BASE:
+ vmcs_writel(GUEST_GS_BASE, data);
+ break;
+#endif
+ case MSR_IA32_SYSENTER_CS:
+ vmcs_write32(GUEST_SYSENTER_CS, data);
+ break;
+ case MSR_IA32_SYSENTER_EIP:
+ vmcs_write32(GUEST_SYSENTER_EIP, data);
+ break;
+ case MSR_IA32_SYSENTER_ESP:
+ vmcs_write32(GUEST_SYSENTER_ESP, data);
+ break;
+#ifdef __x86_64
+ case MSR_EFER:
+ set_efer(vcpu, data);
+ break;
+ case MSR_IA32_MC0_STATUS:
+ printk(KERN_WARNING "%s: MSR_IA32_MC0_STATUS 0x%llx, nop\n"
+ , __FUNCTION__, data);
+ break;
+#endif
+ case MSR_IA32_TIME_STAMP_COUNTER: {
+ guest_write_tsc(data);
+ break;
+ }
+ case MSR_IA32_UCODE_REV:
+ case MSR_IA32_UCODE_WRITE:
+ case 0x200 ... 0x2ff: /* MTRRs */
+ break;
+ case MSR_IA32_APICBASE:
+ vcpu->apic_base = data;
+ break;
+ default:
+ msr = find_msr_entry(vcpu, msr_index);
+ if (!msr) {
+ printk(KERN_ERR "kvm: unhandled wrmsr: 0x%x\n", msr_index);
+ return 1;
+ }
+ msr->data = data;
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * Sync the rsp and rip registers into the vcpu structure. This allows
+ * registers to be accessed by indexing vcpu->regs.
+ */
+static void vcpu_load_rsp_rip(struct kvm_vcpu *vcpu)
+{
+ vcpu->regs[VCPU_REGS_RSP] = vmcs_readl(GUEST_RSP);
+ vcpu->rip = vmcs_readl(GUEST_RIP);
+}
+
+/*
+ * Syncs rsp and rip back into the vmcs. Should be called after possible
+ * modification.
+ */
+static void vcpu_put_rsp_rip(struct kvm_vcpu *vcpu)
+{
+ vmcs_writel(GUEST_RSP, vcpu->regs[VCPU_REGS_RSP]);
+ vmcs_writel(GUEST_RIP, vcpu->rip);
+}
+
+static int set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_debug_guest *dbg)
+{
+ unsigned long dr7 = 0x400;
+ u32 exception_bitmap;
+ int old_singlestep;
+
+ exception_bitmap = vmcs_read32(EXCEPTION_BITMAP);
+ old_singlestep = vcpu->guest_debug.singlestep;
+
+ vcpu->guest_debug.enabled = dbg->enabled;
+ if (vcpu->guest_debug.enabled) {
+ int i;
+
+ dr7 |= 0x200; /* exact */
+ for (i = 0; i < 4; ++i) {
+ if (!dbg->breakpoints[i].enabled)
+ continue;
+ vcpu->guest_debug.bp[i] = dbg->breakpoints[i].address;
+ dr7 |= 2 << (i*2); /* global enable */
+ dr7 |= 0 << (i*4+16); /* execution breakpoint */
+ }
+
+ exception_bitmap |= (1u << 1); /* Trap debug exceptions */
+
+ vcpu->guest_debug.singlestep = dbg->singlestep;
+ } else {
+ exception_bitmap &= ~(1u << 1); /* Ignore debug exceptions */
+ vcpu->guest_debug.singlestep = 0;
+ }
+
+ if (old_singlestep && !vcpu->guest_debug.singlestep) {
+ unsigned long flags;
+
+ flags = vmcs_readl(GUEST_RFLAGS);
+ flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
+ vmcs_writel(GUEST_RFLAGS, flags);
+ }
+
+ vmcs_write32(EXCEPTION_BITMAP, exception_bitmap);
+ vmcs_writel(GUEST_DR7, dr7);
+
+ return 0;
+}
+
+static __init int cpu_has_kvm_support(void)
+{
+ unsigned long ecx = cpuid_ecx(1);
+ return test_bit(5, &ecx); /* CPUID.1:ECX.VMX[bit 5] -> VT */
+}
+
+static __init int vmx_disabled_by_bios(void)
+{
+ u64 msr;
+
+ rdmsrl(MSR_IA32_FEATURE_CONTROL, msr);
+ return (msr & 5) == 1; /* locked but not enabled */
+}
+
+static __init void hardware_enable(void *garbage)
+{
+ int cpu = raw_smp_processor_id();
+ u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
+ u64 old;
+
+ rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
+ if ((old & 5) != 5)
+ /* enable and lock */
+ wrmsrl(MSR_IA32_FEATURE_CONTROL, old | 5);
+ write_cr4(read_cr4() | CR4_VMXE); /* FIXME: not cpu hotplug safe */
+ asm volatile (ASM_VMX_VMXON_RAX : : "a"(&phys_addr), "m"(phys_addr)
+ : "memory", "cc");
+}
+
+static void hardware_disable(void *garbage)
+{
+ asm volatile (ASM_VMX_VMXOFF : : : "cc");
+}
+
+static __init void setup_vmcs_descriptor(void)
+{
+ u32 vmx_msr_low, vmx_msr_high;
+
+ rdmsr(MSR_IA32_VMX_BASIC_MSR, vmx_msr_low, vmx_msr_high);
+ vmcs_descriptor.size = vmx_msr_high & 0x1fff;
+ vmcs_descriptor.order = get_order(vmcs_descriptor.size);
+ vmcs_descriptor.revision_id = vmx_msr_low;
+};
+
+static struct vmcs *alloc_vmcs_cpu(int cpu)
+{
+ int node = cpu_to_node(cpu);
+ struct page *pages;
+ struct vmcs *vmcs;
+
+ pages = alloc_pages_node(node, GFP_KERNEL, vmcs_descriptor.order);
+ if (!pages)
+ return NULL;
+ vmcs = page_address(pages);
+ memset(vmcs, 0, vmcs_descriptor.size);
+ vmcs->revision_id = vmcs_descriptor.revision_id; /* vmcs revision id */
+ return vmcs;
+}
+
+static struct vmcs *alloc_vmcs(void)
+{
+ return alloc_vmcs_cpu(smp_processor_id());
+}
+
+static void free_vmcs(struct vmcs *vmcs)
+{
+ free_pages((unsigned long)vmcs, vmcs_descriptor.order);
+}
+
+static __exit void free_kvm_area(void)
+{
+ int cpu;
+
+ for_each_online_cpu(cpu)
+ free_vmcs(per_cpu(vmxarea, cpu));
+}
+
+extern struct vmcs *alloc_vmcs_cpu(int cpu);
+
+static __init int alloc_kvm_area(void)
+{
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ struct vmcs *vmcs;
+
+ vmcs = alloc_vmcs_cpu(cpu);
+ if (!vmcs) {
+ free_kvm_area();
+ return -ENOMEM;
+ }
+
+ per_cpu(vmxarea, cpu) = vmcs;
+ }
+ return 0;
+}
+
+static __init int hardware_setup(void)
+{
+ setup_vmcs_descriptor();
+ return alloc_kvm_area();
+}
+
+static __exit void hardware_unsetup(void)
+{
+ free_kvm_area();
+}
+
+static void update_exception_bitmap(struct kvm_vcpu *vcpu)
+{
+ if (vcpu->rmode.active)
+ vmcs_write32(EXCEPTION_BITMAP, ~0);
+ else
+ vmcs_write32(EXCEPTION_BITMAP, 1 << PF_VECTOR);
+}
+
+static void fix_pmode_dataseg(int seg, struct kvm_save_segment *save)
+{
+ struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+
+ if (vmcs_readl(sf->base) == save->base) {
+ vmcs_write16(sf->selector, save->selector);
+ vmcs_writel(sf->base, save->base);
+ vmcs_write32(sf->limit, save->limit);
+ vmcs_write32(sf->ar_bytes, save->ar);
+ } else {
+ u32 dpl = (vmcs_read16(sf->selector) & SELECTOR_RPL_MASK)
+ << AR_DPL_SHIFT;
+ vmcs_write32(sf->ar_bytes, 0x93 | dpl);
+ }
+}
+
+static void enter_pmode(struct kvm_vcpu *vcpu)
+{
+ unsigned long flags;
+
+ vcpu->rmode.active = 0;
+
+ vmcs_writel(GUEST_TR_BASE, vcpu->rmode.tr.base);
+ vmcs_write32(GUEST_TR_LIMIT, vcpu->rmode.tr.limit);
+ vmcs_write32(GUEST_TR_AR_BYTES, vcpu->rmode.tr.ar);
+
+ flags = vmcs_readl(GUEST_RFLAGS);
+ flags &= ~(IOPL_MASK | X86_EFLAGS_VM);
+ flags |= (vcpu->rmode.save_iopl << IOPL_SHIFT);
+ vmcs_writel(GUEST_RFLAGS, flags);
+
+ vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~CR4_VME_MASK) |
+ (vmcs_readl(CR4_READ_SHADOW) & CR4_VME_MASK));
+
+ update_exception_bitmap(vcpu);
+
+ fix_pmode_dataseg(VCPU_SREG_ES, &vcpu->rmode.es);
+ fix_pmode_dataseg(VCPU_SREG_DS, &vcpu->rmode.ds);
+ fix_pmode_dataseg(VCPU_SREG_GS, &vcpu->rmode.gs);
+ fix_pmode_dataseg(VCPU_SREG_FS, &vcpu->rmode.fs);
+
+ vmcs_write16(GUEST_SS_SELECTOR, 0);
+ vmcs_write32(GUEST_SS_AR_BYTES, 0x93);
+
+ vmcs_write16(GUEST_CS_SELECTOR,
+ vmcs_read16(GUEST_CS_SELECTOR) & ~SELECTOR_RPL_MASK);
+ vmcs_write32(GUEST_CS_AR_BYTES, 0x9b);
+}
+
+static int rmode_tss_base(struct kvm* kvm)
+{
+ gfn_t base_gfn = kvm->memslots[0].base_gfn + kvm->memslots[0].npages - 3;
+ return base_gfn << PAGE_SHIFT;
+}
+
+static void fix_rmode_seg(int seg, struct kvm_save_segment *save)
+{
+ struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+
+ save->selector = vmcs_read16(sf->selector);
+ save->base = vmcs_readl(sf->base);
+ save->limit = vmcs_read32(sf->limit);
+ save->ar = vmcs_read32(sf->ar_bytes);
+ vmcs_write16(sf->selector, vmcs_readl(sf->base) >> 4);
+ vmcs_write32(sf->limit, 0xffff);
+ vmcs_write32(sf->ar_bytes, 0xf3);
+}
+
+static void enter_rmode(struct kvm_vcpu *vcpu)
+{
+ unsigned long flags;
+
+ vcpu->rmode.active = 1;
+
+ vcpu->rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
+ vmcs_writel(GUEST_TR_BASE, rmode_tss_base(vcpu->kvm));
+
+ vcpu->rmode.tr.limit = vmcs_read32(GUEST_TR_LIMIT);
+ vmcs_write32(GUEST_TR_LIMIT, RMODE_TSS_SIZE - 1);
+
+ vcpu->rmode.tr.ar = vmcs_read32(GUEST_TR_AR_BYTES);
+ vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
+
+ flags = vmcs_readl(GUEST_RFLAGS);
+ vcpu->rmode.save_iopl = (flags & IOPL_MASK) >> IOPL_SHIFT;
+
+ flags |= IOPL_MASK | X86_EFLAGS_VM;
+
+ vmcs_writel(GUEST_RFLAGS, flags);
+ vmcs_writel(GUEST_CR4, vmcs_readl(GUEST_CR4) | CR4_VME_MASK);
+ update_exception_bitmap(vcpu);
+
+ vmcs_write16(GUEST_SS_SELECTOR, vmcs_readl(GUEST_SS_BASE) >> 4);
+ vmcs_write32(GUEST_SS_LIMIT, 0xffff);
+ vmcs_write32(GUEST_SS_AR_BYTES, 0xf3);
+
+ vmcs_write32(GUEST_CS_AR_BYTES, 0xf3);
+ vmcs_write16(GUEST_CS_SELECTOR, vmcs_readl(GUEST_CS_BASE) >> 4);
+
+ fix_rmode_seg(VCPU_SREG_ES, &vcpu->rmode.es);
+ fix_rmode_seg(VCPU_SREG_DS, &vcpu->rmode.ds);
+ fix_rmode_seg(VCPU_SREG_GS, &vcpu->rmode.gs);
+ fix_rmode_seg(VCPU_SREG_FS, &vcpu->rmode.fs);
+}
+
+#ifdef CONFIG_X86_64
+
+static void enter_lmode(struct kvm_vcpu *vcpu)
+{
+ u32 guest_tr_ar;
+
+ guest_tr_ar = vmcs_read32(GUEST_TR_AR_BYTES);
+ if ((guest_tr_ar & AR_TYPE_MASK) != AR_TYPE_BUSY_64_TSS) {
+ printk(KERN_DEBUG "%s: tss fixup for long mode. \n",
+ __FUNCTION__);
+ vmcs_write32(GUEST_TR_AR_BYTES,
+ (guest_tr_ar & ~AR_TYPE_MASK)
+ | AR_TYPE_BUSY_64_TSS);
+ }
+
+ vcpu->shadow_efer |= EFER_LMA;
+
+ find_msr_entry(vcpu, MSR_EFER)->data |= EFER_LMA | EFER_LME;
+ vmcs_write32(VM_ENTRY_CONTROLS,
+ vmcs_read32(VM_ENTRY_CONTROLS)
+ | VM_ENTRY_CONTROLS_IA32E_MASK);
+}
+
+static void exit_lmode(struct kvm_vcpu *vcpu)
+{
+ vcpu->shadow_efer &= ~EFER_LMA;
+
+ vmcs_write32(VM_ENTRY_CONTROLS,
+ vmcs_read32(VM_ENTRY_CONTROLS)
+ & ~VM_ENTRY_CONTROLS_IA32E_MASK);
+}
+
+#endif
+
+static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
+{
+ if (vcpu->rmode.active && (cr0 & CR0_PE_MASK))
+ enter_pmode(vcpu);
+
+ if (!vcpu->rmode.active && !(cr0 & CR0_PE_MASK))
+ enter_rmode(vcpu);
+
+#ifdef CONFIG_X86_64
+ if (vcpu->shadow_efer & EFER_LME) {
+ if (!is_paging(vcpu) && (cr0 & CR0_PG_MASK))
+ enter_lmode(vcpu);
+ if (is_paging(vcpu) && !(cr0 & CR0_PG_MASK))
+ exit_lmode(vcpu);
+ }
+#endif
+
+ vmcs_writel(CR0_READ_SHADOW, cr0);
+ vmcs_writel(GUEST_CR0,
+ (cr0 & ~KVM_GUEST_CR0_MASK) | KVM_VM_CR0_ALWAYS_ON);
+ vcpu->cr0 = cr0;
+}
+
+/*
+ * Used when restoring the VM to avoid corrupting segment registers
+ */
+static void vmx_set_cr0_no_modeswitch(struct kvm_vcpu *vcpu, unsigned long cr0)
+{
+ vcpu->rmode.active = ((cr0 & CR0_PE_MASK) == 0);
+ update_exception_bitmap(vcpu);
+ vmcs_writel(CR0_READ_SHADOW, cr0);
+ vmcs_writel(GUEST_CR0,
+ (cr0 & ~KVM_GUEST_CR0_MASK) | KVM_VM_CR0_ALWAYS_ON);
+ vcpu->cr0 = cr0;
+}
+
+static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
+{
+ vmcs_writel(GUEST_CR3, cr3);
+}
+
+static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+{
+ vmcs_writel(CR4_READ_SHADOW, cr4);
+ vmcs_writel(GUEST_CR4, cr4 | (vcpu->rmode.active ?
+ KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON));
+ vcpu->cr4 = cr4;
+}
+
+#ifdef CONFIG_X86_64
+
+static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
+{
+ struct vmx_msr_entry *msr = find_msr_entry(vcpu, MSR_EFER);
+
+ vcpu->shadow_efer = efer;
+ if (efer & EFER_LMA) {
+ vmcs_write32(VM_ENTRY_CONTROLS,
+ vmcs_read32(VM_ENTRY_CONTROLS) |
+ VM_ENTRY_CONTROLS_IA32E_MASK);
+ msr->data = efer;
+
+ } else {
+ vmcs_write32(VM_ENTRY_CONTROLS,
+ vmcs_read32(VM_ENTRY_CONTROLS) &
+ ~VM_ENTRY_CONTROLS_IA32E_MASK);
+
+ msr->data = efer & ~EFER_LME;
+ }
+}
+
+#endif
+
+static u64 vmx_get_segment_base(struct kvm_vcpu *vcpu, int seg)
+{
+ struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+
+ return vmcs_readl(sf->base);
+}
+
+static void vmx_get_segment(struct kvm_vcpu *vcpu,
+ struct kvm_segment *var, int seg)
+{
+ struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+ u32 ar;
+
+ var->base = vmcs_readl(sf->base);
+ var->limit = vmcs_read32(sf->limit);
+ var->selector = vmcs_read16(sf->selector);
+ ar = vmcs_read32(sf->ar_bytes);
+ if (ar & AR_UNUSABLE_MASK)
+ ar = 0;
+ var->type = ar & 15;
+ var->s = (ar >> 4) & 1;
+ var->dpl = (ar >> 5) & 3;
+ var->present = (ar >> 7) & 1;
+ var->avl = (ar >> 12) & 1;
+ var->l = (ar >> 13) & 1;
+ var->db = (ar >> 14) & 1;
+ var->g = (ar >> 15) & 1;
+ var->unusable = (ar >> 16) & 1;
+}
+
+static void vmx_set_segment(struct kvm_vcpu *vcpu,
+ struct kvm_segment *var, int seg)
+{
+ struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+ u32 ar;
+
+ vmcs_writel(sf->base, var->base);
+ vmcs_write32(sf->limit, var->limit);
+ vmcs_write16(sf->selector, var->selector);
+ if (var->unusable)
+ ar = 1 << 16;
+ else {
+ ar = var->type & 15;
+ ar |= (var->s & 1) << 4;
+ ar |= (var->dpl & 3) << 5;
+ ar |= (var->present & 1) << 7;
+ ar |= (var->avl & 1) << 12;
+ ar |= (var->l & 1) << 13;
+ ar |= (var->db & 1) << 14;
+ ar |= (var->g & 1) << 15;
+ }
+ if (ar == 0) /* a 0 value means unusable */
+ ar = AR_UNUSABLE_MASK;
+ vmcs_write32(sf->ar_bytes, ar);
+}
+
+static int vmx_is_long_mode(struct kvm_vcpu *vcpu)
+{
+ return vmcs_read32(VM_ENTRY_CONTROLS) & VM_ENTRY_CONTROLS_IA32E_MASK;
+}
+
+static void vmx_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
+{
+ u32 ar = vmcs_read32(GUEST_CS_AR_BYTES);
+
+ *db = (ar >> 14) & 1;
+ *l = (ar >> 13) & 1;
+}
+
+static void vmx_get_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+{
+ dt->limit = vmcs_read32(GUEST_IDTR_LIMIT);
+ dt->base = vmcs_readl(GUEST_IDTR_BASE);
+}
+
+static void vmx_set_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+{
+ vmcs_write32(GUEST_IDTR_LIMIT, dt->limit);
+ vmcs_writel(GUEST_IDTR_BASE, dt->base);
+}
+
+static void vmx_get_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+{
+ dt->limit = vmcs_read32(GUEST_GDTR_LIMIT);
+ dt->base = vmcs_readl(GUEST_GDTR_BASE);
+}
+
+static void vmx_set_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+{
+ vmcs_write32(GUEST_GDTR_LIMIT, dt->limit);
+ vmcs_writel(GUEST_GDTR_BASE, dt->base);
+}
+
+static int init_rmode_tss(struct kvm* kvm)
+{
+ struct page *p1, *p2, *p3;
+ gfn_t fn = rmode_tss_base(kvm) >> PAGE_SHIFT;
+ char *page;
+
+ p1 = _gfn_to_page(kvm, fn++);
+ p2 = _gfn_to_page(kvm, fn++);
+ p3 = _gfn_to_page(kvm, fn);
+
+ if (!p1 || !p2 || !p3) {
+ kvm_printf(kvm,"%s: gfn_to_page failed\n", __FUNCTION__);
+ return 0;
+ }
+
+ page = kmap_atomic(p1, KM_USER0);
+ memset(page, 0, PAGE_SIZE);
+ *(u16*)(page + 0x66) = TSS_BASE_SIZE + TSS_REDIRECTION_SIZE;
+ kunmap_atomic(page, KM_USER0);
+
+ page = kmap_atomic(p2, KM_USER0);
+ memset(page, 0, PAGE_SIZE);
+ kunmap_atomic(page, KM_USER0);
+
+ page = kmap_atomic(p3, KM_USER0);
+ memset(page, 0, PAGE_SIZE);
+ *(page + RMODE_TSS_SIZE - 2 * PAGE_SIZE - 1) = ~0;
+ kunmap_atomic(page, KM_USER0);
+
+ return 1;
+}
+
+static void vmcs_write32_fixedbits(u32 msr, u32 vmcs_field, u32 val)
+{
+ u32 msr_high, msr_low;
+
+ rdmsr(msr, msr_low, msr_high);
+
+ val &= msr_high;
+ val |= msr_low;
+ vmcs_write32(vmcs_field, val);
+}
+
+static void seg_setup(int seg)
+{
+ struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+
+ vmcs_write16(sf->selector, 0);
+ vmcs_writel(sf->base, 0);
+ vmcs_write32(sf->limit, 0xffff);
+ vmcs_write32(sf->ar_bytes, 0x93);
+}
+
+/*
+ * Sets up the vmcs for emulated real mode.
+ */
+static int vmx_vcpu_setup(struct kvm_vcpu *vcpu)
+{
+ u32 host_sysenter_cs;
+ u32 junk;
+ unsigned long a;
+ struct descriptor_table dt;
+ int i;
+ int ret = 0;
+ int nr_good_msrs;
+ extern asmlinkage void kvm_vmx_return(void);
+
+ if (!init_rmode_tss(vcpu->kvm)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memset(vcpu->regs, 0, sizeof(vcpu->regs));
+ vcpu->regs[VCPU_REGS_RDX] = get_rdx_init_val();
+ vcpu->cr8 = 0;
+ vcpu->apic_base = 0xfee00000 |
+ /*for vcpu 0*/ MSR_IA32_APICBASE_BSP |
+ MSR_IA32_APICBASE_ENABLE;
+
+ fx_init(vcpu);
+
+ /*
+ * GUEST_CS_BASE should really be 0xffff0000, but VT vm86 mode
+ * insists on having GUEST_CS_BASE == GUEST_CS_SELECTOR << 4. Sigh.
+ */
+ vmcs_write16(GUEST_CS_SELECTOR, 0xf000);
+ vmcs_writel(GUEST_CS_BASE, 0x000f0000);
+ vmcs_write32(GUEST_CS_LIMIT, 0xffff);
+ vmcs_write32(GUEST_CS_AR_BYTES, 0x9b);
+
+ seg_setup(VCPU_SREG_DS);
+ seg_setup(VCPU_SREG_ES);
+ seg_setup(VCPU_SREG_FS);
+ seg_setup(VCPU_SREG_GS);
+ seg_setup(VCPU_SREG_SS);
+
+ vmcs_write16(GUEST_TR_SELECTOR, 0);
+ vmcs_writel(GUEST_TR_BASE, 0);
+ vmcs_write32(GUEST_TR_LIMIT, 0xffff);
+ vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
+
+ vmcs_write16(GUEST_LDTR_SELECTOR, 0);
+ vmcs_writel(GUEST_LDTR_BASE, 0);
+ vmcs_write32(GUEST_LDTR_LIMIT, 0xffff);
+ vmcs_write32(GUEST_LDTR_AR_BYTES, 0x00082);
+
+ vmcs_write32(GUEST_SYSENTER_CS, 0);
+ vmcs_writel(GUEST_SYSENTER_ESP, 0);
+ vmcs_writel(GUEST_SYSENTER_EIP, 0);
+
+ vmcs_writel(GUEST_RFLAGS, 0x02);
+ vmcs_writel(GUEST_RIP, 0xfff0);
+ vmcs_writel(GUEST_RSP, 0);
+
+ vmcs_writel(GUEST_CR3, 0);
+
+ //todo: dr0 = dr1 = dr2 = dr3 = 0; dr6 = 0xffff0ff0
+ vmcs_writel(GUEST_DR7, 0x400);
+
+ vmcs_writel(GUEST_GDTR_BASE, 0);
+ vmcs_write32(GUEST_GDTR_LIMIT, 0xffff);
+
+ vmcs_writel(GUEST_IDTR_BASE, 0);
+ vmcs_write32(GUEST_IDTR_LIMIT, 0xffff);
+
+ vmcs_write32(GUEST_ACTIVITY_STATE, 0);
+ vmcs_write32(GUEST_INTERRUPTIBILITY_INFO, 0);
+ vmcs_write32(GUEST_PENDING_DBG_EXCEPTIONS, 0);
+
+ /* I/O */
+ vmcs_write64(IO_BITMAP_A, 0);
+ vmcs_write64(IO_BITMAP_B, 0);
+
+ guest_write_tsc(0);
+
+ vmcs_write64(VMCS_LINK_POINTER, -1ull); /* 22.3.1.5 */
+
+ /* Special registers */
+ vmcs_write64(GUEST_IA32_DEBUGCTL, 0);
+
+ /* Control */
+ vmcs_write32_fixedbits(MSR_IA32_VMX_PINBASED_CTLS_MSR,
+ PIN_BASED_VM_EXEC_CONTROL,
+ PIN_BASED_EXT_INTR_MASK /* 20.6.1 */
+ | PIN_BASED_NMI_EXITING /* 20.6.1 */
+ );
+ vmcs_write32_fixedbits(MSR_IA32_VMX_PROCBASED_CTLS_MSR,
+ CPU_BASED_VM_EXEC_CONTROL,
+ CPU_BASED_HLT_EXITING /* 20.6.2 */
+ | CPU_BASED_CR8_LOAD_EXITING /* 20.6.2 */
+ | CPU_BASED_CR8_STORE_EXITING /* 20.6.2 */
+ | CPU_BASED_UNCOND_IO_EXITING /* 20.6.2 */
+ | CPU_BASED_INVDPG_EXITING
+ | CPU_BASED_MOV_DR_EXITING
+ | CPU_BASED_USE_TSC_OFFSETING /* 21.3 */
+ );
+
+ vmcs_write32(EXCEPTION_BITMAP, 1 << PF_VECTOR);
+ vmcs_write32(PAGE_FAULT_ERROR_CODE_MASK, 0);
+ vmcs_write32(PAGE_FAULT_ERROR_CODE_MATCH, 0);
+ vmcs_write32(CR3_TARGET_COUNT, 0); /* 22.2.1 */
+
+ vmcs_writel(HOST_CR0, read_cr0()); /* 22.2.3 */
+ vmcs_writel(HOST_CR4, read_cr4()); /* 22.2.3, 22.2.5 */
+ vmcs_writel(HOST_CR3, read_cr3()); /* 22.2.3 FIXME: shadow tables */
+
+ vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS); /* 22.2.4 */
+ vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS); /* 22.2.4 */
+ vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS); /* 22.2.4 */
+ vmcs_write16(HOST_FS_SELECTOR, read_fs()); /* 22.2.4 */
+ vmcs_write16(HOST_GS_SELECTOR, read_gs()); /* 22.2.4 */
+ vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS); /* 22.2.4 */
+#ifdef CONFIG_X86_64
+ rdmsrl(MSR_FS_BASE, a);
+ vmcs_writel(HOST_FS_BASE, a); /* 22.2.4 */
+ rdmsrl(MSR_GS_BASE, a);
+ vmcs_writel(HOST_GS_BASE, a); /* 22.2.4 */
+#else
+ vmcs_writel(HOST_FS_BASE, 0); /* 22.2.4 */
+ vmcs_writel(HOST_GS_BASE, 0); /* 22.2.4 */
+#endif
+
+ vmcs_write16(HOST_TR_SELECTOR, GDT_ENTRY_TSS*8); /* 22.2.4 */
+
+ get_idt(&dt);
+ vmcs_writel(HOST_IDTR_BASE, dt.base); /* 22.2.4 */
+
+
+ vmcs_writel(HOST_RIP, (unsigned long)kvm_vmx_return); /* 22.2.5 */
+
+ rdmsr(MSR_IA32_SYSENTER_CS, host_sysenter_cs, junk);
+ vmcs_write32(HOST_IA32_SYSENTER_CS, host_sysenter_cs);
+ rdmsrl(MSR_IA32_SYSENTER_ESP, a);
+ vmcs_writel(HOST_IA32_SYSENTER_ESP, a); /* 22.2.3 */
+ rdmsrl(MSR_IA32_SYSENTER_EIP, a);
+ vmcs_writel(HOST_IA32_SYSENTER_EIP, a); /* 22.2.3 */
+
+ ret = -ENOMEM;
+ vcpu->guest_msrs = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!vcpu->guest_msrs)
+ goto out;
+ vcpu->host_msrs = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!vcpu->host_msrs)
+ goto out_free_guest_msrs;
+
+ for (i = 0; i < NR_VMX_MSR; ++i) {
+ u32 index = vmx_msr_index[i];
+ u32 data_low, data_high;
+ u64 data;
+ int j = vcpu->nmsrs;
+
+ if (rdmsr_safe(index, &data_low, &data_high) < 0)
+ continue;
+ data = data_low | ((u64)data_high << 32);
+ vcpu->host_msrs[j].index = index;
+ vcpu->host_msrs[j].reserved = 0;
+ vcpu->host_msrs[j].data = data;
+ vcpu->guest_msrs[j] = vcpu->host_msrs[j];
+ ++vcpu->nmsrs;
+ }
+ printk(KERN_DEBUG "kvm: msrs: %d\n", vcpu->nmsrs);
+
+ nr_good_msrs = vcpu->nmsrs - NR_BAD_MSRS;
+ vmcs_writel(VM_ENTRY_MSR_LOAD_ADDR,
+ virt_to_phys(vcpu->guest_msrs + NR_BAD_MSRS));
+ vmcs_writel(VM_EXIT_MSR_STORE_ADDR,
+ virt_to_phys(vcpu->guest_msrs + NR_BAD_MSRS));
+ vmcs_writel(VM_EXIT_MSR_LOAD_ADDR,
+ virt_to_phys(vcpu->host_msrs + NR_BAD_MSRS));
+ vmcs_write32_fixedbits(MSR_IA32_VMX_EXIT_CTLS_MSR, VM_EXIT_CONTROLS,
+ (HOST_IS_64 << 9)); /* 22.2,1, 20.7.1 */
+ vmcs_write32(VM_EXIT_MSR_STORE_COUNT, nr_good_msrs); /* 22.2.2 */
+ vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, nr_good_msrs); /* 22.2.2 */
+ vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, nr_good_msrs); /* 22.2.2 */
+
+
+ /* 22.2.1, 20.8.1 */
+ vmcs_write32_fixedbits(MSR_IA32_VMX_ENTRY_CTLS_MSR,
+ VM_ENTRY_CONTROLS, 0);
+ vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0); /* 22.2.1 */
+
+#ifdef CONFIG_X86_64
+ vmcs_writel(VIRTUAL_APIC_PAGE_ADDR, 0);
+ vmcs_writel(TPR_THRESHOLD, 0);
+#endif
+
+ vmcs_writel(CR0_GUEST_HOST_MASK, KVM_GUEST_CR0_MASK);
+ vmcs_writel(CR4_GUEST_HOST_MASK, KVM_GUEST_CR4_MASK);
+
+ vcpu->cr0 = 0x60000010;
+ vmx_set_cr0(vcpu, vcpu->cr0); // enter rmode
+ vmx_set_cr4(vcpu, 0);
+#ifdef CONFIG_X86_64
+ vmx_set_efer(vcpu, 0);
+#endif
+
+ return 0;
+
+out_free_guest_msrs:
+ kfree(vcpu->guest_msrs);
+out:
+ return ret;
+}
+
+static void inject_rmode_irq(struct kvm_vcpu *vcpu, int irq)
+{
+ u16 ent[2];
+ u16 cs;
+ u16 ip;
+ unsigned long flags;
+ unsigned long ss_base = vmcs_readl(GUEST_SS_BASE);
+ u16 sp = vmcs_readl(GUEST_RSP);
+ u32 ss_limit = vmcs_read32(GUEST_SS_LIMIT);
+
+ if (sp > ss_limit || sp - 6 > sp) {
+ vcpu_printf(vcpu, "%s: #SS, rsp 0x%lx ss 0x%lx limit 0x%x\n",
+ __FUNCTION__,
+ vmcs_readl(GUEST_RSP),
+ vmcs_readl(GUEST_SS_BASE),
+ vmcs_read32(GUEST_SS_LIMIT));
+ return;
+ }
+
+ if (kvm_read_guest(vcpu, irq * sizeof(ent), sizeof(ent), &ent) !=
+ sizeof(ent)) {
+ vcpu_printf(vcpu, "%s: read guest err\n", __FUNCTION__);
+ return;
+ }
+
+ flags = vmcs_readl(GUEST_RFLAGS);
+ cs = vmcs_readl(GUEST_CS_BASE) >> 4;
+ ip = vmcs_readl(GUEST_RIP);
+
+
+ if (kvm_write_guest(vcpu, ss_base + sp - 2, 2, &flags) != 2 ||
+ kvm_write_guest(vcpu, ss_base + sp - 4, 2, &cs) != 2 ||
+ kvm_write_guest(vcpu, ss_base + sp - 6, 2, &ip) != 2) {
+ vcpu_printf(vcpu, "%s: write guest err\n", __FUNCTION__);
+ return;
+ }
+
+ vmcs_writel(GUEST_RFLAGS, flags &
+ ~( X86_EFLAGS_IF | X86_EFLAGS_AC | X86_EFLAGS_TF));
+ vmcs_write16(GUEST_CS_SELECTOR, ent[1]) ;
+ vmcs_writel(GUEST_CS_BASE, ent[1] << 4);
+ vmcs_writel(GUEST_RIP, ent[0]);
+ vmcs_writel(GUEST_RSP, (vmcs_readl(GUEST_RSP) & ~0xffff) | (sp - 6));
+}
+
+static void kvm_do_inject_irq(struct kvm_vcpu *vcpu)
+{
+ int word_index = __ffs(vcpu->irq_summary);
+ int bit_index = __ffs(vcpu->irq_pending[word_index]);
+ int irq = word_index * BITS_PER_LONG + bit_index;
+
+ clear_bit(bit_index, &vcpu->irq_pending[word_index]);
+ if (!vcpu->irq_pending[word_index])
+ clear_bit(word_index, &vcpu->irq_summary);
+
+ if (vcpu->rmode.active) {
+ inject_rmode_irq(vcpu, irq);
+ return;
+ }
+ vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+ irq | INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
+}
+
+static void kvm_try_inject_irq(struct kvm_vcpu *vcpu)
+{
+ if ((vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF)
+ && (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0)
+ /*
+ * Interrupts enabled, and not blocked by sti or mov ss. Good.
+ */
+ kvm_do_inject_irq(vcpu);
+ else
+ /*
+ * Interrupts blocked. Wait for unblock.
+ */
+ vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
+ vmcs_read32(CPU_BASED_VM_EXEC_CONTROL)
+ | CPU_BASED_VIRTUAL_INTR_PENDING);
+}
+
+static void kvm_guest_debug_pre(struct kvm_vcpu *vcpu)
+{
+ struct kvm_guest_debug *dbg = &vcpu->guest_debug;
+
+ set_debugreg(dbg->bp[0], 0);
+ set_debugreg(dbg->bp[1], 1);
+ set_debugreg(dbg->bp[2], 2);
+ set_debugreg(dbg->bp[3], 3);
+
+ if (dbg->singlestep) {
+ unsigned long flags;
+
+ flags = vmcs_readl(GUEST_RFLAGS);
+ flags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
+ vmcs_writel(GUEST_RFLAGS, flags);
+ }
+}
+
+static int handle_rmode_exception(struct kvm_vcpu *vcpu,
+ int vec, u32 err_code)
+{
+ if (!vcpu->rmode.active)
+ return 0;
+
+ if (vec == GP_VECTOR && err_code == 0)
+ if (emulate_instruction(vcpu, NULL, 0, 0) == EMULATE_DONE)
+ return 1;
+ return 0;
+}
+
+static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u32 intr_info, error_code;
+ unsigned long cr2, rip;
+ u32 vect_info;
+ enum emulation_result er;
+
+ vect_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
+ intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+
+ if ((vect_info & VECTORING_INFO_VALID_MASK) &&
+ !is_page_fault(intr_info)) {
+ printk(KERN_ERR "%s: unexpected, vectoring info 0x%x "
+ "intr info 0x%x\n", __FUNCTION__, vect_info, intr_info);
+ }
+
+ if (is_external_interrupt(vect_info)) {
+ int irq = vect_info & VECTORING_INFO_VECTOR_MASK;
+ set_bit(irq, vcpu->irq_pending);
+ set_bit(irq / BITS_PER_LONG, &vcpu->irq_summary);
+ }
+
+ if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == 0x200) { /* nmi */
+ asm ("int $2");
+ return 1;
+ }
+ error_code = 0;
+ rip = vmcs_readl(GUEST_RIP);
+ if (intr_info & INTR_INFO_DELIEVER_CODE_MASK)
+ error_code = vmcs_read32(VM_EXIT_INTR_ERROR_CODE);
+ if (is_page_fault(intr_info)) {
+ cr2 = vmcs_readl(EXIT_QUALIFICATION);
+
+ spin_lock(&vcpu->kvm->lock);
+ if (!vcpu->mmu.page_fault(vcpu, cr2, error_code)) {
+ spin_unlock(&vcpu->kvm->lock);
+ return 1;
+ }
+
+ er = emulate_instruction(vcpu, kvm_run, cr2, error_code);
+ spin_unlock(&vcpu->kvm->lock);
+
+ switch (er) {
+ case EMULATE_DONE:
+ return 1;
+ case EMULATE_DO_MMIO:
+ ++kvm_stat.mmio_exits;
+ kvm_run->exit_reason = KVM_EXIT_MMIO;
+ return 0;
+ case EMULATE_FAIL:
+ vcpu_printf(vcpu, "%s: emulate fail\n", __FUNCTION__);
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ if (vcpu->rmode.active &&
+ handle_rmode_exception(vcpu, intr_info & INTR_INFO_VECTOR_MASK,
+ error_code))
+ return 1;
+
+ if ((intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK)) == (INTR_TYPE_EXCEPTION | 1)) {
+ kvm_run->exit_reason = KVM_EXIT_DEBUG;
+ return 0;
+ }
+ kvm_run->exit_reason = KVM_EXIT_EXCEPTION;
+ kvm_run->ex.exception = intr_info & INTR_INFO_VECTOR_MASK;
+ kvm_run->ex.error_code = error_code;
+ return 0;
+}
+
+static int handle_external_interrupt(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run)
+{
+ ++kvm_stat.irq_exits;
+ return 1;
+}
+
+
+static int get_io_count(struct kvm_vcpu *vcpu, u64 *count)
+{
+ u64 inst;
+ gva_t rip;
+ int countr_size;
+ int i, n;
+
+ if ((vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_VM)) {
+ countr_size = 2;
+ } else {
+ u32 cs_ar = vmcs_read32(GUEST_CS_AR_BYTES);
+
+ countr_size = (cs_ar & AR_L_MASK) ? 8:
+ (cs_ar & AR_DB_MASK) ? 4: 2;
+ }
+
+ rip = vmcs_readl(GUEST_RIP);
+ if (countr_size != 8)
+ rip += vmcs_readl(GUEST_CS_BASE);
+
+ n = kvm_read_guest(vcpu, rip, sizeof(inst), &inst);
+
+ for (i = 0; i < n; i++) {
+ switch (((u8*)&inst)[i]) {
+ case 0xf0:
+ case 0xf2:
+ case 0xf3:
+ case 0x2e:
+ case 0x36:
+ case 0x3e:
+ case 0x26:
+ case 0x64:
+ case 0x65:
+ case 0x66:
+ break;
+ case 0x67:
+ countr_size = (countr_size == 2) ? 4: (countr_size >> 1);
+ default:
+ goto done;
+ }
+ }
+ return 0;
+done:
+ countr_size *= 8;
+ *count = vcpu->regs[VCPU_REGS_RCX] & (~0ULL >> (64 - countr_size));
+ return 1;
+}
+
+static int handle_io(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u64 exit_qualification;
+
+ ++kvm_stat.io_exits;
+ exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
+ kvm_run->exit_reason = KVM_EXIT_IO;
+ if (exit_qualification & 8)
+ kvm_run->io.direction = KVM_EXIT_IO_IN;
+ else
+ kvm_run->io.direction = KVM_EXIT_IO_OUT;
+ kvm_run->io.size = (exit_qualification & 7) + 1;
+ kvm_run->io.string = (exit_qualification & 16) != 0;
+ kvm_run->io.string_down
+ = (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_DF) != 0;
+ kvm_run->io.rep = (exit_qualification & 32) != 0;
+ kvm_run->io.port = exit_qualification >> 16;
+ if (kvm_run->io.string) {
+ if (!get_io_count(vcpu, &kvm_run->io.count))
+ return 1;
+ kvm_run->io.address = vmcs_readl(GUEST_LINEAR_ADDRESS);
+ } else
+ kvm_run->io.value = vcpu->regs[VCPU_REGS_RAX]; /* rax */
+ return 0;
+}
+
+static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u64 address = vmcs_read64(EXIT_QUALIFICATION);
+ int instruction_length = vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
+ spin_lock(&vcpu->kvm->lock);
+ vcpu->mmu.inval_page(vcpu, address);
+ spin_unlock(&vcpu->kvm->lock);
+ vmcs_writel(GUEST_RIP, vmcs_readl(GUEST_RIP) + instruction_length);
+ return 1;
+}
+
+static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u64 exit_qualification;
+ int cr;
+ int reg;
+
+ exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
+ cr = exit_qualification & 15;
+ reg = (exit_qualification >> 8) & 15;
+ switch ((exit_qualification >> 4) & 3) {
+ case 0: /* mov to cr */
+ switch (cr) {
+ case 0:
+ vcpu_load_rsp_rip(vcpu);
+ set_cr0(vcpu, vcpu->regs[reg]);
+ skip_emulated_instruction(vcpu);
+ return 1;
+ case 3:
+ vcpu_load_rsp_rip(vcpu);
+ set_cr3(vcpu, vcpu->regs[reg]);
+ skip_emulated_instruction(vcpu);
+ return 1;
+ case 4:
+ vcpu_load_rsp_rip(vcpu);
+ set_cr4(vcpu, vcpu->regs[reg]);
+ skip_emulated_instruction(vcpu);
+ return 1;
+ case 8:
+ vcpu_load_rsp_rip(vcpu);
+ set_cr8(vcpu, vcpu->regs[reg]);
+ skip_emulated_instruction(vcpu);
+ return 1;
+ };
+ break;
+ case 1: /*mov from cr*/
+ switch (cr) {
+ case 3:
+ vcpu_load_rsp_rip(vcpu);
+ vcpu->regs[reg] = vcpu->cr3;
+ vcpu_put_rsp_rip(vcpu);
+ skip_emulated_instruction(vcpu);
+ return 1;
+ case 8:
+ printk(KERN_DEBUG "handle_cr: read CR8 "
+ "cpu erratum AA15\n");
+ vcpu_load_rsp_rip(vcpu);
+ vcpu->regs[reg] = vcpu->cr8;
+ vcpu_put_rsp_rip(vcpu);
+ skip_emulated_instruction(vcpu);
+ return 1;
+ }
+ break;
+ case 3: /* lmsw */
+ lmsw(vcpu, (exit_qualification >> LMSW_SOURCE_DATA_SHIFT) & 0x0f);
+
+ skip_emulated_instruction(vcpu);
+ return 1;
+ default:
+ break;
+ }
+ kvm_run->exit_reason = 0;
+ printk(KERN_ERR "kvm: unhandled control register: op %d cr %d\n",
+ (int)(exit_qualification >> 4) & 3, cr);
+ return 0;
+}
+
+static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u64 exit_qualification;
+ unsigned long val;
+ int dr, reg;
+
+ /*
+ * FIXME: this code assumes the host is debugging the guest.
+ * need to deal with guest debugging itself too.
+ */
+ exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
+ dr = exit_qualification & 7;
+ reg = (exit_qualification >> 8) & 15;
+ vcpu_load_rsp_rip(vcpu);
+ if (exit_qualification & 16) {
+ /* mov from dr */
+ switch (dr) {
+ case 6:
+ val = 0xffff0ff0;
+ break;
+ case 7:
+ val = 0x400;
+ break;
+ default:
+ val = 0;
+ }
+ vcpu->regs[reg] = val;
+ } else {
+ /* mov to dr */
+ }
+ vcpu_put_rsp_rip(vcpu);
+ skip_emulated_instruction(vcpu);
+ return 1;
+}
+
+static int handle_cpuid(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ kvm_run->exit_reason = KVM_EXIT_CPUID;
+ return 0;
+}
+
+static int handle_rdmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u32 ecx = vcpu->regs[VCPU_REGS_RCX];
+ u64 data;
+
+ if (vmx_get_msr(vcpu, ecx, &data)) {
+ vmx_inject_gp(vcpu, 0);
+ return 1;
+ }
+
+ /* FIXME: handling of bits 32:63 of rax, rdx */
+ vcpu->regs[VCPU_REGS_RAX] = data & -1u;
+ vcpu->regs[VCPU_REGS_RDX] = (data >> 32) & -1u;
+ skip_emulated_instruction(vcpu);
+ return 1;
+}
+
+static int handle_wrmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u32 ecx = vcpu->regs[VCPU_REGS_RCX];
+ u64 data = (vcpu->regs[VCPU_REGS_RAX] & -1u)
+ | ((u64)(vcpu->regs[VCPU_REGS_RDX] & -1u) << 32);
+
+ if (vmx_set_msr(vcpu, ecx, data) != 0) {
+ vmx_inject_gp(vcpu, 0);
+ return 1;
+ }
+
+ skip_emulated_instruction(vcpu);
+ return 1;
+}
+
+static int handle_interrupt_window(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run)
+{
+ /* Turn off interrupt window reporting. */
+ vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
+ vmcs_read32(CPU_BASED_VM_EXEC_CONTROL)
+ & ~CPU_BASED_VIRTUAL_INTR_PENDING);
+ return 1;
+}
+
+static int handle_halt(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ skip_emulated_instruction(vcpu);
+ if (vcpu->irq_summary && (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF))
+ return 1;
+
+ kvm_run->exit_reason = KVM_EXIT_HLT;
+ return 0;
+}
+
+/*
+ * The exit handlers return 1 if the exit was handled fully and guest execution
+ * may resume. Otherwise they set the kvm_run parameter to indicate what needs
+ * to be done to userspace and return 0.
+ */
+static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
+ struct kvm_run *kvm_run) = {
+ [EXIT_REASON_EXCEPTION_NMI] = handle_exception,
+ [EXIT_REASON_EXTERNAL_INTERRUPT] = handle_external_interrupt,
+ [EXIT_REASON_IO_INSTRUCTION] = handle_io,
+ [EXIT_REASON_INVLPG] = handle_invlpg,
+ [EXIT_REASON_CR_ACCESS] = handle_cr,
+ [EXIT_REASON_DR_ACCESS] = handle_dr,
+ [EXIT_REASON_CPUID] = handle_cpuid,
+ [EXIT_REASON_MSR_READ] = handle_rdmsr,
+ [EXIT_REASON_MSR_WRITE] = handle_wrmsr,
+ [EXIT_REASON_PENDING_INTERRUPT] = handle_interrupt_window,
+ [EXIT_REASON_HLT] = handle_halt,
+};
+
+static const int kvm_vmx_max_exit_handlers =
+ sizeof(kvm_vmx_exit_handlers) / sizeof(*kvm_vmx_exit_handlers);
+
+/*
+ * The guest has exited. See if we can fix it or if we need userspace
+ * assistance.
+ */
+static int kvm_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+{
+ u32 vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
+ u32 exit_reason = vmcs_read32(VM_EXIT_REASON);
+
+ if ( (vectoring_info & VECTORING_INFO_VALID_MASK) &&
+ exit_reason != EXIT_REASON_EXCEPTION_NMI )
+ printk(KERN_WARNING "%s: unexpected, valid vectoring info and "
+ "exit reason is 0x%x\n", __FUNCTION__, exit_reason);
+ kvm_run->instruction_length = vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
+ if (exit_reason < kvm_vmx_max_exit_handlers
+ && kvm_vmx_exit_handlers[exit_reason])
+ return kvm_vmx_exit_handlers[exit_reason](vcpu, kvm_run);
+ else {
+ kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+ kvm_run->hw.hardware_exit_reason = exit_reason;
+ }
+ return 0;
+}
+
+static int vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+ u8 fail;
+ u16 fs_sel, gs_sel, ldt_sel;
+ int fs_gs_ldt_reload_needed;
+
+again:
+ /*
+ * Set host fs and gs selectors. Unfortunately, 22.2.3 does not
+ * allow segment selectors with cpl > 0 or ti == 1.
+ */
+ fs_sel = read_fs();
+ gs_sel = read_gs();
+ ldt_sel = read_ldt();
+ fs_gs_ldt_reload_needed = (fs_sel & 7) | (gs_sel & 7) | ldt_sel;
+ if (!fs_gs_ldt_reload_needed) {
+ vmcs_write16(HOST_FS_SELECTOR, fs_sel);
+ vmcs_write16(HOST_GS_SELECTOR, gs_sel);
+ } else {
+ vmcs_write16(HOST_FS_SELECTOR, 0);
+ vmcs_write16(HOST_GS_SELECTOR, 0);
+ }
+
+#ifdef CONFIG_X86_64
+ vmcs_writel(HOST_FS_BASE, read_msr(MSR_FS_BASE));
+ vmcs_writel(HOST_GS_BASE, read_msr(MSR_GS_BASE));
+#else
+ vmcs_writel(HOST_FS_BASE, segment_base(fs_sel));
+ vmcs_writel(HOST_GS_BASE, segment_base(gs_sel));
+#endif
+
+ if (vcpu->irq_summary &&
+ !(vmcs_read32(VM_ENTRY_INTR_INFO_FIELD) & INTR_INFO_VALID_MASK))
+ kvm_try_inject_irq(vcpu);
+
+ if (vcpu->guest_debug.enabled)
+ kvm_guest_debug_pre(vcpu);
+
+ fx_save(vcpu->host_fx_image);
+ fx_restore(vcpu->guest_fx_image);
+
+ save_msrs(vcpu->host_msrs, vcpu->nmsrs);
+ load_msrs(vcpu->guest_msrs, NR_BAD_MSRS);
+
+ asm (
+ /* Store host registers */
+ "pushf \n\t"
+#ifdef CONFIG_X86_64
+ "push %%rax; push %%rbx; push %%rdx;"
+ "push %%rsi; push %%rdi; push %%rbp;"
+ "push %%r8; push %%r9; push %%r10; push %%r11;"
+ "push %%r12; push %%r13; push %%r14; push %%r15;"
+ "push %%rcx \n\t"
+ ASM_VMX_VMWRITE_RSP_RDX "\n\t"
+#else
+ "pusha; push %%ecx \n\t"
+ ASM_VMX_VMWRITE_RSP_RDX "\n\t"
+#endif
+ /* Check if vmlaunch of vmresume is needed */
+ "cmp $0, %1 \n\t"
+ /* Load guest registers. Don't clobber flags. */
+#ifdef CONFIG_X86_64
+ "mov %c[cr2](%3), %%rax \n\t"
+ "mov %%rax, %%cr2 \n\t"
+ "mov %c[rax](%3), %%rax \n\t"
+ "mov %c[rbx](%3), %%rbx \n\t"
+ "mov %c[rdx](%3), %%rdx \n\t"
+ "mov %c[rsi](%3), %%rsi \n\t"
+ "mov %c[rdi](%3), %%rdi \n\t"
+ "mov %c[rbp](%3), %%rbp \n\t"
+ "mov %c[r8](%3), %%r8 \n\t"
+ "mov %c[r9](%3), %%r9 \n\t"
+ "mov %c[r10](%3), %%r10 \n\t"
+ "mov %c[r11](%3), %%r11 \n\t"
+ "mov %c[r12](%3), %%r12 \n\t"
+ "mov %c[r13](%3), %%r13 \n\t"
+ "mov %c[r14](%3), %%r14 \n\t"
+ "mov %c[r15](%3), %%r15 \n\t"
+ "mov %c[rcx](%3), %%rcx \n\t" /* kills %3 (rcx) */
+#else
+ "mov %c[cr2](%3), %%eax \n\t"
+ "mov %%eax, %%cr2 \n\t"
+ "mov %c[rax](%3), %%eax \n\t"
+ "mov %c[rbx](%3), %%ebx \n\t"
+ "mov %c[rdx](%3), %%edx \n\t"
+ "mov %c[rsi](%3), %%esi \n\t"
+ "mov %c[rdi](%3), %%edi \n\t"
+ "mov %c[rbp](%3), %%ebp \n\t"
+ "mov %c[rcx](%3), %%ecx \n\t" /* kills %3 (ecx) */
+#endif
+ /* Enter guest mode */
+ "jne launched \n\t"
+ ASM_VMX_VMLAUNCH "\n\t"
+ "jmp kvm_vmx_return \n\t"
+ "launched: " ASM_VMX_VMRESUME "\n\t"
+ ".globl kvm_vmx_return \n\t"
+ "kvm_vmx_return: "
+ /* Save guest registers, load host registers, keep flags */
+#ifdef CONFIG_X86_64
+ "xchg %3, 0(%%rsp) \n\t"
+ "mov %%rax, %c[rax](%3) \n\t"
+ "mov %%rbx, %c[rbx](%3) \n\t"
+ "pushq 0(%%rsp); popq %c[rcx](%3) \n\t"
+ "mov %%rdx, %c[rdx](%3) \n\t"
+ "mov %%rsi, %c[rsi](%3) \n\t"
+ "mov %%rdi, %c[rdi](%3) \n\t"
+ "mov %%rbp, %c[rbp](%3) \n\t"
+ "mov %%r8, %c[r8](%3) \n\t"
+ "mov %%r9, %c[r9](%3) \n\t"
+ "mov %%r10, %c[r10](%3) \n\t"
+ "mov %%r11, %c[r11](%3) \n\t"
+ "mov %%r12, %c[r12](%3) \n\t"
+ "mov %%r13, %c[r13](%3) \n\t"
+ "mov %%r14, %c[r14](%3) \n\t"
+ "mov %%r15, %c[r15](%3) \n\t"
+ "mov %%cr2, %%rax \n\t"
+ "mov %%rax, %c[cr2](%3) \n\t"
+ "mov 0(%%rsp), %3 \n\t"
+
+ "pop %%rcx; pop %%r15; pop %%r14; pop %%r13; pop %%r12;"
+ "pop %%r11; pop %%r10; pop %%r9; pop %%r8;"
+ "pop %%rbp; pop %%rdi; pop %%rsi;"
+ "pop %%rdx; pop %%rbx; pop %%rax \n\t"
+#else
+ "xchg %3, 0(%%esp) \n\t"
+ "mov %%eax, %c[rax](%3) \n\t"
+ "mov %%ebx, %c[rbx](%3) \n\t"
+ "pushl 0(%%esp); popl %c[rcx](%3) \n\t"
+ "mov %%edx, %c[rdx](%3) \n\t"
+ "mov %%esi, %c[rsi](%3) \n\t"
+ "mov %%edi, %c[rdi](%3) \n\t"
+ "mov %%ebp, %c[rbp](%3) \n\t"
+ "mov %%cr2, %%eax \n\t"
+ "mov %%eax, %c[cr2](%3) \n\t"
+ "mov 0(%%esp), %3 \n\t"
+
+ "pop %%ecx; popa \n\t"
+#endif
+ "setbe %0 \n\t"
+ "popf \n\t"
+ : "=g" (fail)
+ : "r"(vcpu->launched), "d"((unsigned long)HOST_RSP),
+ "c"(vcpu),
+ [rax]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RAX])),
+ [rbx]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RBX])),
+ [rcx]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RCX])),
+ [rdx]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RDX])),
+ [rsi]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RSI])),
+ [rdi]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RDI])),
+ [rbp]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RBP])),
+#ifdef CONFIG_X86_64
+ [r8 ]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R8 ])),
+ [r9 ]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R9 ])),
+ [r10]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R10])),
+ [r11]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R11])),
+ [r12]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R12])),
+ [r13]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R13])),
+ [r14]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R14])),
+ [r15]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_R15])),
+#endif
+ [cr2]"i"(offsetof(struct kvm_vcpu, cr2))
+ : "cc", "memory" );
+
+ ++kvm_stat.exits;
+
+ save_msrs(vcpu->guest_msrs, NR_BAD_MSRS);
+ load_msrs(vcpu->host_msrs, NR_BAD_MSRS);
+
+ fx_save(vcpu->guest_fx_image);
+ fx_restore(vcpu->host_fx_image);
+
+#ifndef CONFIG_X86_64
+ asm ("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
+#endif
+
+ kvm_run->exit_type = 0;
+ if (fail) {
+ kvm_run->exit_type = KVM_EXIT_TYPE_FAIL_ENTRY;
+ kvm_run->exit_reason = vmcs_read32(VM_INSTRUCTION_ERROR);
+ } else {
+ if (fs_gs_ldt_reload_needed) {
+ load_ldt(ldt_sel);
+ load_fs(fs_sel);
+ /*
+ * If we have to reload gs, we must take care to
+ * preserve our gs base.
+ */
+ local_irq_disable();
+ load_gs(gs_sel);
+#ifdef CONFIG_X86_64
+ wrmsrl(MSR_GS_BASE, vmcs_readl(HOST_GS_BASE));
+#endif
+ local_irq_enable();
+
+ reload_tss();
+ }
+ vcpu->launched = 1;
+ kvm_run->exit_type = KVM_EXIT_TYPE_VM_EXIT;
+ if (kvm_handle_exit(kvm_run, vcpu)) {
+ /* Give scheduler a change to reschedule. */
+ if (signal_pending(current)) {
+ ++kvm_stat.signal_exits;
+ return -EINTR;
+ }
+ kvm_resched(vcpu);
+ goto again;
+ }
+ }
+ return 0;
+}
+
+static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
+{
+ vmcs_writel(GUEST_CR3, vmcs_readl(GUEST_CR3));
+}
+
+static void vmx_inject_page_fault(struct kvm_vcpu *vcpu,
+ unsigned long addr,
+ u32 err_code)
+{
+ u32 vect_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
+
+ ++kvm_stat.pf_guest;
+
+ if (is_page_fault(vect_info)) {
+ printk(KERN_DEBUG "inject_page_fault: "
+ "double fault 0x%lx @ 0x%lx\n",
+ addr, vmcs_readl(GUEST_RIP));
+ vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, 0);
+ vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+ DF_VECTOR |
+ INTR_TYPE_EXCEPTION |
+ INTR_INFO_DELIEVER_CODE_MASK |
+ INTR_INFO_VALID_MASK);
+ return;
+ }
+ vcpu->cr2 = addr;
+ vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE, err_code);
+ vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+ PF_VECTOR |
+ INTR_TYPE_EXCEPTION |
+ INTR_INFO_DELIEVER_CODE_MASK |
+ INTR_INFO_VALID_MASK);
+
+}
+
+static void vmx_free_vmcs(struct kvm_vcpu *vcpu)
+{
+ if (vcpu->vmcs) {
+ on_each_cpu(__vcpu_clear, vcpu, 0, 1);
+ free_vmcs(vcpu->vmcs);
+ vcpu->vmcs = NULL;
+ }
+}
+
+static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
+{
+ vmx_free_vmcs(vcpu);
+}
+
+static int vmx_create_vcpu(struct kvm_vcpu *vcpu)
+{
+ struct vmcs *vmcs;
+
+ vmcs = alloc_vmcs();
+ if (!vmcs)
+ return -ENOMEM;
+ vmcs_clear(vmcs);
+ vcpu->vmcs = vmcs;
+ vcpu->launched = 0;
+ return 0;
+}
+
+static struct kvm_arch_ops vmx_arch_ops = {
+ .cpu_has_kvm_support = cpu_has_kvm_support,
+ .disabled_by_bios = vmx_disabled_by_bios,
+ .hardware_setup = hardware_setup,
+ .hardware_unsetup = hardware_unsetup,
+ .hardware_enable = hardware_enable,
+ .hardware_disable = hardware_disable,
+
+ .vcpu_create = vmx_create_vcpu,
+ .vcpu_free = vmx_free_vcpu,
+
+ .vcpu_load = vmx_vcpu_load,
+ .vcpu_put = vmx_vcpu_put,
+
+ .set_guest_debug = set_guest_debug,
+ .get_msr = vmx_get_msr,
+ .set_msr = vmx_set_msr,
+ .get_segment_base = vmx_get_segment_base,
+ .get_segment = vmx_get_segment,
+ .set_segment = vmx_set_segment,
+ .is_long_mode = vmx_is_long_mode,
+ .get_cs_db_l_bits = vmx_get_cs_db_l_bits,
+ .set_cr0 = vmx_set_cr0,
+ .set_cr0_no_modeswitch = vmx_set_cr0_no_modeswitch,
+ .set_cr3 = vmx_set_cr3,
+ .set_cr4 = vmx_set_cr4,
+#ifdef CONFIG_X86_64
+ .set_efer = vmx_set_efer,
+#endif
+ .get_idt = vmx_get_idt,
+ .set_idt = vmx_set_idt,
+ .get_gdt = vmx_get_gdt,
+ .set_gdt = vmx_set_gdt,
+ .cache_regs = vcpu_load_rsp_rip,
+ .decache_regs = vcpu_put_rsp_rip,
+ .get_rflags = vmx_get_rflags,
+ .set_rflags = vmx_set_rflags,
+
+ .tlb_flush = vmx_flush_tlb,
+ .inject_page_fault = vmx_inject_page_fault,
+
+ .inject_gp = vmx_inject_gp,
+
+ .run = vmx_vcpu_run,
+ .skip_emulated_instruction = skip_emulated_instruction,
+ .vcpu_setup = vmx_vcpu_setup,
+};
+
+static int __init vmx_init(void)
+{
+ return kvm_init_arch(&vmx_arch_ops, THIS_MODULE);
+}
+
+static void __exit vmx_exit(void)
+{
+ kvm_exit_arch();
+}
+
+module_init(vmx_init)
+module_exit(vmx_exit)
--- /dev/null
+#ifndef VMX_H
+#define VMX_H
+
+/*
+ * vmx.h: VMX Architecture related definitions
+ * Copyright (c) 2004, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * A few random additions are:
+ * Copyright (C) 2006 Qumranet
+ * Avi Kivity <avi@qumranet.com>
+ * Yaniv Kamay <yaniv@qumranet.com>
+ *
+ */
+
+#define CPU_BASED_VIRTUAL_INTR_PENDING 0x00000004
+#define CPU_BASED_USE_TSC_OFFSETING 0x00000008
+#define CPU_BASED_HLT_EXITING 0x00000080
+#define CPU_BASED_INVDPG_EXITING 0x00000200
+#define CPU_BASED_MWAIT_EXITING 0x00000400
+#define CPU_BASED_RDPMC_EXITING 0x00000800
+#define CPU_BASED_RDTSC_EXITING 0x00001000
+#define CPU_BASED_CR8_LOAD_EXITING 0x00080000
+#define CPU_BASED_CR8_STORE_EXITING 0x00100000
+#define CPU_BASED_TPR_SHADOW 0x00200000
+#define CPU_BASED_MOV_DR_EXITING 0x00800000
+#define CPU_BASED_UNCOND_IO_EXITING 0x01000000
+#define CPU_BASED_ACTIVATE_IO_BITMAP 0x02000000
+#define CPU_BASED_MSR_BITMAPS 0x10000000
+#define CPU_BASED_MONITOR_EXITING 0x20000000
+#define CPU_BASED_PAUSE_EXITING 0x40000000
+
+#define PIN_BASED_EXT_INTR_MASK 0x1
+#define PIN_BASED_NMI_EXITING 0x8
+
+#define VM_EXIT_ACK_INTR_ON_EXIT 0x00008000
+#define VM_EXIT_HOST_ADD_SPACE_SIZE 0x00000200
+
+
+/* VMCS Encodings */
+enum vmcs_field {
+ GUEST_ES_SELECTOR = 0x00000800,
+ GUEST_CS_SELECTOR = 0x00000802,
+ GUEST_SS_SELECTOR = 0x00000804,
+ GUEST_DS_SELECTOR = 0x00000806,
+ GUEST_FS_SELECTOR = 0x00000808,
+ GUEST_GS_SELECTOR = 0x0000080a,
+ GUEST_LDTR_SELECTOR = 0x0000080c,
+ GUEST_TR_SELECTOR = 0x0000080e,
+ HOST_ES_SELECTOR = 0x00000c00,
+ HOST_CS_SELECTOR = 0x00000c02,
+ HOST_SS_SELECTOR = 0x00000c04,
+ HOST_DS_SELECTOR = 0x00000c06,
+ HOST_FS_SELECTOR = 0x00000c08,
+ HOST_GS_SELECTOR = 0x00000c0a,
+ HOST_TR_SELECTOR = 0x00000c0c,
+ IO_BITMAP_A = 0x00002000,
+ IO_BITMAP_A_HIGH = 0x00002001,
+ IO_BITMAP_B = 0x00002002,
+ IO_BITMAP_B_HIGH = 0x00002003,
+ MSR_BITMAP = 0x00002004,
+ MSR_BITMAP_HIGH = 0x00002005,
+ VM_EXIT_MSR_STORE_ADDR = 0x00002006,
+ VM_EXIT_MSR_STORE_ADDR_HIGH = 0x00002007,
+ VM_EXIT_MSR_LOAD_ADDR = 0x00002008,
+ VM_EXIT_MSR_LOAD_ADDR_HIGH = 0x00002009,
+ VM_ENTRY_MSR_LOAD_ADDR = 0x0000200a,
+ VM_ENTRY_MSR_LOAD_ADDR_HIGH = 0x0000200b,
+ TSC_OFFSET = 0x00002010,
+ TSC_OFFSET_HIGH = 0x00002011,
+ VIRTUAL_APIC_PAGE_ADDR = 0x00002012,
+ VIRTUAL_APIC_PAGE_ADDR_HIGH = 0x00002013,
+ VMCS_LINK_POINTER = 0x00002800,
+ VMCS_LINK_POINTER_HIGH = 0x00002801,
+ GUEST_IA32_DEBUGCTL = 0x00002802,
+ GUEST_IA32_DEBUGCTL_HIGH = 0x00002803,
+ PIN_BASED_VM_EXEC_CONTROL = 0x00004000,
+ CPU_BASED_VM_EXEC_CONTROL = 0x00004002,
+ EXCEPTION_BITMAP = 0x00004004,
+ PAGE_FAULT_ERROR_CODE_MASK = 0x00004006,
+ PAGE_FAULT_ERROR_CODE_MATCH = 0x00004008,
+ CR3_TARGET_COUNT = 0x0000400a,
+ VM_EXIT_CONTROLS = 0x0000400c,
+ VM_EXIT_MSR_STORE_COUNT = 0x0000400e,
+ VM_EXIT_MSR_LOAD_COUNT = 0x00004010,
+ VM_ENTRY_CONTROLS = 0x00004012,
+ VM_ENTRY_MSR_LOAD_COUNT = 0x00004014,
+ VM_ENTRY_INTR_INFO_FIELD = 0x00004016,
+ VM_ENTRY_EXCEPTION_ERROR_CODE = 0x00004018,
+ VM_ENTRY_INSTRUCTION_LEN = 0x0000401a,
+ TPR_THRESHOLD = 0x0000401c,
+ SECONDARY_VM_EXEC_CONTROL = 0x0000401e,
+ VM_INSTRUCTION_ERROR = 0x00004400,
+ VM_EXIT_REASON = 0x00004402,
+ VM_EXIT_INTR_INFO = 0x00004404,
+ VM_EXIT_INTR_ERROR_CODE = 0x00004406,
+ IDT_VECTORING_INFO_FIELD = 0x00004408,
+ IDT_VECTORING_ERROR_CODE = 0x0000440a,
+ VM_EXIT_INSTRUCTION_LEN = 0x0000440c,
+ VMX_INSTRUCTION_INFO = 0x0000440e,
+ GUEST_ES_LIMIT = 0x00004800,
+ GUEST_CS_LIMIT = 0x00004802,
+ GUEST_SS_LIMIT = 0x00004804,
+ GUEST_DS_LIMIT = 0x00004806,
+ GUEST_FS_LIMIT = 0x00004808,
+ GUEST_GS_LIMIT = 0x0000480a,
+ GUEST_LDTR_LIMIT = 0x0000480c,
+ GUEST_TR_LIMIT = 0x0000480e,
+ GUEST_GDTR_LIMIT = 0x00004810,
+ GUEST_IDTR_LIMIT = 0x00004812,
+ GUEST_ES_AR_BYTES = 0x00004814,
+ GUEST_CS_AR_BYTES = 0x00004816,
+ GUEST_SS_AR_BYTES = 0x00004818,
+ GUEST_DS_AR_BYTES = 0x0000481a,
+ GUEST_FS_AR_BYTES = 0x0000481c,
+ GUEST_GS_AR_BYTES = 0x0000481e,
+ GUEST_LDTR_AR_BYTES = 0x00004820,
+ GUEST_TR_AR_BYTES = 0x00004822,
+ GUEST_INTERRUPTIBILITY_INFO = 0x00004824,
+ GUEST_ACTIVITY_STATE = 0X00004826,
+ GUEST_SYSENTER_CS = 0x0000482A,
+ HOST_IA32_SYSENTER_CS = 0x00004c00,
+ CR0_GUEST_HOST_MASK = 0x00006000,
+ CR4_GUEST_HOST_MASK = 0x00006002,
+ CR0_READ_SHADOW = 0x00006004,
+ CR4_READ_SHADOW = 0x00006006,
+ CR3_TARGET_VALUE0 = 0x00006008,
+ CR3_TARGET_VALUE1 = 0x0000600a,
+ CR3_TARGET_VALUE2 = 0x0000600c,
+ CR3_TARGET_VALUE3 = 0x0000600e,
+ EXIT_QUALIFICATION = 0x00006400,
+ GUEST_LINEAR_ADDRESS = 0x0000640a,
+ GUEST_CR0 = 0x00006800,
+ GUEST_CR3 = 0x00006802,
+ GUEST_CR4 = 0x00006804,
+ GUEST_ES_BASE = 0x00006806,
+ GUEST_CS_BASE = 0x00006808,
+ GUEST_SS_BASE = 0x0000680a,
+ GUEST_DS_BASE = 0x0000680c,
+ GUEST_FS_BASE = 0x0000680e,
+ GUEST_GS_BASE = 0x00006810,
+ GUEST_LDTR_BASE = 0x00006812,
+ GUEST_TR_BASE = 0x00006814,
+ GUEST_GDTR_BASE = 0x00006816,
+ GUEST_IDTR_BASE = 0x00006818,
+ GUEST_DR7 = 0x0000681a,
+ GUEST_RSP = 0x0000681c,
+ GUEST_RIP = 0x0000681e,
+ GUEST_RFLAGS = 0x00006820,
+ GUEST_PENDING_DBG_EXCEPTIONS = 0x00006822,
+ GUEST_SYSENTER_ESP = 0x00006824,
+ GUEST_SYSENTER_EIP = 0x00006826,
+ HOST_CR0 = 0x00006c00,
+ HOST_CR3 = 0x00006c02,
+ HOST_CR4 = 0x00006c04,
+ HOST_FS_BASE = 0x00006c06,
+ HOST_GS_BASE = 0x00006c08,
+ HOST_TR_BASE = 0x00006c0a,
+ HOST_GDTR_BASE = 0x00006c0c,
+ HOST_IDTR_BASE = 0x00006c0e,
+ HOST_IA32_SYSENTER_ESP = 0x00006c10,
+ HOST_IA32_SYSENTER_EIP = 0x00006c12,
+ HOST_RSP = 0x00006c14,
+ HOST_RIP = 0x00006c16,
+};
+
+#define VMX_EXIT_REASONS_FAILED_VMENTRY 0x80000000
+
+#define EXIT_REASON_EXCEPTION_NMI 0
+#define EXIT_REASON_EXTERNAL_INTERRUPT 1
+
+#define EXIT_REASON_PENDING_INTERRUPT 7
+
+#define EXIT_REASON_TASK_SWITCH 9
+#define EXIT_REASON_CPUID 10
+#define EXIT_REASON_HLT 12
+#define EXIT_REASON_INVLPG 14
+#define EXIT_REASON_RDPMC 15
+#define EXIT_REASON_RDTSC 16
+#define EXIT_REASON_VMCALL 18
+#define EXIT_REASON_VMCLEAR 19
+#define EXIT_REASON_VMLAUNCH 20
+#define EXIT_REASON_VMPTRLD 21
+#define EXIT_REASON_VMPTRST 22
+#define EXIT_REASON_VMREAD 23
+#define EXIT_REASON_VMRESUME 24
+#define EXIT_REASON_VMWRITE 25
+#define EXIT_REASON_VMOFF 26
+#define EXIT_REASON_VMON 27
+#define EXIT_REASON_CR_ACCESS 28
+#define EXIT_REASON_DR_ACCESS 29
+#define EXIT_REASON_IO_INSTRUCTION 30
+#define EXIT_REASON_MSR_READ 31
+#define EXIT_REASON_MSR_WRITE 32
+#define EXIT_REASON_MWAIT_INSTRUCTION 36
+
+/*
+ * Interruption-information format
+ */
+#define INTR_INFO_VECTOR_MASK 0xff /* 7:0 */
+#define INTR_INFO_INTR_TYPE_MASK 0x700 /* 10:8 */
+#define INTR_INFO_DELIEVER_CODE_MASK 0x800 /* 11 */
+#define INTR_INFO_VALID_MASK 0x80000000 /* 31 */
+
+#define VECTORING_INFO_VECTOR_MASK INTR_INFO_VECTOR_MASK
+#define VECTORING_INFO_TYPE_MASK INTR_INFO_INTR_TYPE_MASK
+#define VECTORING_INFO_DELIEVER_CODE_MASK INTR_INFO_DELIEVER_CODE_MASK
+#define VECTORING_INFO_VALID_MASK INTR_INFO_VALID_MASK
+
+#define INTR_TYPE_EXT_INTR (0 << 8) /* external interrupt */
+#define INTR_TYPE_EXCEPTION (3 << 8) /* processor exception */
+
+/*
+ * Exit Qualifications for MOV for Control Register Access
+ */
+#define CONTROL_REG_ACCESS_NUM 0x7 /* 2:0, number of control register */
+#define CONTROL_REG_ACCESS_TYPE 0x30 /* 5:4, access type */
+#define CONTROL_REG_ACCESS_REG 0xf00 /* 10:8, general purpose register */
+#define LMSW_SOURCE_DATA_SHIFT 16
+#define LMSW_SOURCE_DATA (0xFFFF << LMSW_SOURCE_DATA_SHIFT) /* 16:31 lmsw source */
+#define REG_EAX (0 << 8)
+#define REG_ECX (1 << 8)
+#define REG_EDX (2 << 8)
+#define REG_EBX (3 << 8)
+#define REG_ESP (4 << 8)
+#define REG_EBP (5 << 8)
+#define REG_ESI (6 << 8)
+#define REG_EDI (7 << 8)
+#define REG_R8 (8 << 8)
+#define REG_R9 (9 << 8)
+#define REG_R10 (10 << 8)
+#define REG_R11 (11 << 8)
+#define REG_R12 (12 << 8)
+#define REG_R13 (13 << 8)
+#define REG_R14 (14 << 8)
+#define REG_R15 (15 << 8)
+
+/*
+ * Exit Qualifications for MOV for Debug Register Access
+ */
+#define DEBUG_REG_ACCESS_NUM 0x7 /* 2:0, number of debug register */
+#define DEBUG_REG_ACCESS_TYPE 0x10 /* 4, direction of access */
+#define TYPE_MOV_TO_DR (0 << 4)
+#define TYPE_MOV_FROM_DR (1 << 4)
+#define DEBUG_REG_ACCESS_REG 0xf00 /* 11:8, general purpose register */
+
+
+/* segment AR */
+#define SEGMENT_AR_L_MASK (1 << 13)
+
+/* entry controls */
+#define VM_ENTRY_CONTROLS_IA32E_MASK (1 << 9)
+
+#define AR_TYPE_ACCESSES_MASK 1
+#define AR_TYPE_READABLE_MASK (1 << 1)
+#define AR_TYPE_WRITEABLE_MASK (1 << 2)
+#define AR_TYPE_CODE_MASK (1 << 3)
+#define AR_TYPE_MASK 0x0f
+#define AR_TYPE_BUSY_64_TSS 11
+#define AR_TYPE_BUSY_32_TSS 11
+#define AR_TYPE_BUSY_16_TSS 3
+#define AR_TYPE_LDT 2
+
+#define AR_UNUSABLE_MASK (1 << 16)
+#define AR_S_MASK (1 << 4)
+#define AR_P_MASK (1 << 7)
+#define AR_L_MASK (1 << 13)
+#define AR_DB_MASK (1 << 14)
+#define AR_G_MASK (1 << 15)
+#define AR_DPL_SHIFT 5
+#define AR_DPL(ar) (((ar) >> AR_DPL_SHIFT) & 3)
+
+#define AR_RESERVD_MASK 0xfffe0f00
+
+#define CR4_VMXE 0x2000
+
+#define MSR_IA32_VMX_BASIC_MSR 0x480
+#define MSR_IA32_FEATURE_CONTROL 0x03a
+#define MSR_IA32_VMX_PINBASED_CTLS_MSR 0x481
+#define MSR_IA32_VMX_PROCBASED_CTLS_MSR 0x482
+#define MSR_IA32_VMX_EXIT_CTLS_MSR 0x483
+#define MSR_IA32_VMX_ENTRY_CTLS_MSR 0x484
+
+#endif
--- /dev/null
+/******************************************************************************
+ * x86_emulate.c
+ *
+ * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
+ *
+ * Copyright (c) 2005 Keir Fraser
+ *
+ * Linux coding style, mod r/m decoder, segment base fixes, real-mode
+ * privieged instructions:
+ *
+ * Copyright (C) 2006 Qumranet
+ *
+ * Avi Kivity <avi@qumranet.com>
+ * Yaniv Kamay <yaniv@qumranet.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
+ */
+
+#ifndef __KERNEL__
+#include <stdio.h>
+#include <stdint.h>
+#include <public/xen.h>
+#define DPRINTF(_f, _a ...) printf( _f , ## _a )
+#else
+#include "kvm.h"
+#define DPRINTF(x...) do {} while (0)
+#endif
+#include "x86_emulate.h"
+#include <linux/module.h>
+
+/*
+ * Opcode effective-address decode tables.
+ * Note that we only emulate instructions that have at least one memory
+ * operand (excluding implicit stack references). We assume that stack
+ * references and instruction fetches will never occur in special memory
+ * areas that require emulation. So, for example, 'mov <imm>,<reg>' need
+ * not be handled.
+ */
+
+/* Operand sizes: 8-bit operands or specified/overridden size. */
+#define ByteOp (1<<0) /* 8-bit operands. */
+/* Destination operand type. */
+#define ImplicitOps (1<<1) /* Implicit in opcode. No generic decode. */
+#define DstReg (2<<1) /* Register operand. */
+#define DstMem (3<<1) /* Memory operand. */
+#define DstMask (3<<1)
+/* Source operand type. */
+#define SrcNone (0<<3) /* No source operand. */
+#define SrcImplicit (0<<3) /* Source operand is implicit in the opcode. */
+#define SrcReg (1<<3) /* Register operand. */
+#define SrcMem (2<<3) /* Memory operand. */
+#define SrcMem16 (3<<3) /* Memory operand (16-bit). */
+#define SrcMem32 (4<<3) /* Memory operand (32-bit). */
+#define SrcImm (5<<3) /* Immediate operand. */
+#define SrcImmByte (6<<3) /* 8-bit sign-extended immediate operand. */
+#define SrcMask (7<<3)
+/* Generic ModRM decode. */
+#define ModRM (1<<6)
+/* Destination is only written; never read. */
+#define Mov (1<<7)
+
+static u8 opcode_table[256] = {
+ /* 0x00 - 0x07 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x08 - 0x0F */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x10 - 0x17 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x18 - 0x1F */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x20 - 0x27 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x28 - 0x2F */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x30 - 0x37 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x38 - 0x3F */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+ 0, 0, 0, 0,
+ /* 0x40 - 0x4F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x50 - 0x5F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x60 - 0x6F */
+ 0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x70 - 0x7F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x80 - 0x87 */
+ ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+ ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+ /* 0x88 - 0x8F */
+ ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
+ ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ 0, 0, 0, DstMem | SrcNone | ModRM | Mov,
+ /* 0x90 - 0x9F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xA0 - 0xA7 */
+ ByteOp | DstReg | SrcMem | Mov, DstReg | SrcMem | Mov,
+ ByteOp | DstMem | SrcReg | Mov, DstMem | SrcReg | Mov,
+ ByteOp | ImplicitOps | Mov, ImplicitOps | Mov,
+ ByteOp | ImplicitOps, ImplicitOps,
+ /* 0xA8 - 0xAF */
+ 0, 0, ByteOp | ImplicitOps | Mov, ImplicitOps | Mov,
+ ByteOp | ImplicitOps | Mov, ImplicitOps | Mov,
+ ByteOp | ImplicitOps, ImplicitOps,
+ /* 0xB0 - 0xBF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xC0 - 0xC7 */
+ ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM, 0, 0,
+ 0, 0, ByteOp | DstMem | SrcImm | ModRM | Mov,
+ DstMem | SrcImm | ModRM | Mov,
+ /* 0xC8 - 0xCF */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xD0 - 0xD7 */
+ ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
+ ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
+ 0, 0, 0, 0,
+ /* 0xD8 - 0xDF */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xE0 - 0xEF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xF0 - 0xF7 */
+ 0, 0, 0, 0,
+ 0, 0, ByteOp | DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
+ /* 0xF8 - 0xFF */
+ 0, 0, 0, 0,
+ 0, 0, ByteOp | DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM
+};
+
+static u8 twobyte_table[256] = {
+ /* 0x00 - 0x0F */
+ 0, SrcMem | ModRM | DstReg, 0, 0, 0, 0, ImplicitOps, 0,
+ 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
+ /* 0x10 - 0x1F */
+ 0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x20 - 0x2F */
+ ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x30 - 0x3F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x40 - 0x47 */
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ /* 0x48 - 0x4F */
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+ /* 0x50 - 0x5F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x60 - 0x6F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x70 - 0x7F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x80 - 0x8F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0x90 - 0x9F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xA0 - 0xA7 */
+ 0, 0, 0, DstMem | SrcReg | ModRM, 0, 0, 0, 0,
+ /* 0xA8 - 0xAF */
+ 0, 0, 0, DstMem | SrcReg | ModRM, 0, 0, 0, 0,
+ /* 0xB0 - 0xB7 */
+ ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
+ DstMem | SrcReg | ModRM,
+ 0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem16 | ModRM | Mov,
+ /* 0xB8 - 0xBF */
+ 0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM,
+ 0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
+ DstReg | SrcMem16 | ModRM | Mov,
+ /* 0xC0 - 0xCF */
+ 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xD0 - 0xDF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xE0 - 0xEF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ /* 0xF0 - 0xFF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/*
+ * Tell the emulator that of the Group 7 instructions (sgdt, lidt, etc.) we
+ * are interested only in invlpg and not in any of the rest.
+ *
+ * invlpg is a special instruction in that the data it references may not
+ * be mapped.
+ */
+void kvm_emulator_want_group7_invlpg(void)
+{
+ twobyte_table[1] &= ~SrcMem;
+}
+EXPORT_SYMBOL_GPL(kvm_emulator_want_group7_invlpg);
+
+/* Type, address-of, and value of an instruction's operand. */
+struct operand {
+ enum { OP_REG, OP_MEM, OP_IMM } type;
+ unsigned int bytes;
+ unsigned long val, orig_val, *ptr;
+};
+
+/* EFLAGS bit definitions. */
+#define EFLG_OF (1<<11)
+#define EFLG_DF (1<<10)
+#define EFLG_SF (1<<7)
+#define EFLG_ZF (1<<6)
+#define EFLG_AF (1<<4)
+#define EFLG_PF (1<<2)
+#define EFLG_CF (1<<0)
+
+/*
+ * Instruction emulation:
+ * Most instructions are emulated directly via a fragment of inline assembly
+ * code. This allows us to save/restore EFLAGS and thus very easily pick up
+ * any modified flags.
+ */
+
+#if defined(CONFIG_X86_64)
+#define _LO32 "k" /* force 32-bit operand */
+#define _STK "%%rsp" /* stack pointer */
+#elif defined(__i386__)
+#define _LO32 "" /* force 32-bit operand */
+#define _STK "%%esp" /* stack pointer */
+#endif
+
+/*
+ * These EFLAGS bits are restored from saved value during emulation, and
+ * any changes are written back to the saved value after emulation.
+ */
+#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
+
+/* Before executing instruction: restore necessary bits in EFLAGS. */
+#define _PRE_EFLAGS(_sav, _msk, _tmp) \
+ /* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); */ \
+ "push %"_sav"; " \
+ "movl %"_msk",%"_LO32 _tmp"; " \
+ "andl %"_LO32 _tmp",("_STK"); " \
+ "pushf; " \
+ "notl %"_LO32 _tmp"; " \
+ "andl %"_LO32 _tmp",("_STK"); " \
+ "pop %"_tmp"; " \
+ "orl %"_LO32 _tmp",("_STK"); " \
+ "popf; " \
+ /* _sav &= ~msk; */ \
+ "movl %"_msk",%"_LO32 _tmp"; " \
+ "notl %"_LO32 _tmp"; " \
+ "andl %"_LO32 _tmp",%"_sav"; "
+
+/* After executing instruction: write-back necessary bits in EFLAGS. */
+#define _POST_EFLAGS(_sav, _msk, _tmp) \
+ /* _sav |= EFLAGS & _msk; */ \
+ "pushf; " \
+ "pop %"_tmp"; " \
+ "andl %"_msk",%"_LO32 _tmp"; " \
+ "orl %"_LO32 _tmp",%"_sav"; "
+
+/* Raw emulation: instruction has two explicit operands. */
+#define __emulate_2op_nobyte(_op,_src,_dst,_eflags,_wx,_wy,_lx,_ly,_qx,_qy) \
+ do { \
+ unsigned long _tmp; \
+ \
+ switch ((_dst).bytes) { \
+ case 2: \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0","4","2") \
+ _op"w %"_wx"3,%1; " \
+ _POST_EFLAGS("0","4","2") \
+ : "=m" (_eflags), "=m" ((_dst).val), \
+ "=&r" (_tmp) \
+ : _wy ((_src).val), "i" (EFLAGS_MASK) ); \
+ break; \
+ case 4: \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0","4","2") \
+ _op"l %"_lx"3,%1; " \
+ _POST_EFLAGS("0","4","2") \
+ : "=m" (_eflags), "=m" ((_dst).val), \
+ "=&r" (_tmp) \
+ : _ly ((_src).val), "i" (EFLAGS_MASK) ); \
+ break; \
+ case 8: \
+ __emulate_2op_8byte(_op, _src, _dst, \
+ _eflags, _qx, _qy); \
+ break; \
+ } \
+ } while (0)
+
+#define __emulate_2op(_op,_src,_dst,_eflags,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
+ do { \
+ unsigned long _tmp; \
+ switch ( (_dst).bytes ) \
+ { \
+ case 1: \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0","4","2") \
+ _op"b %"_bx"3,%1; " \
+ _POST_EFLAGS("0","4","2") \
+ : "=m" (_eflags), "=m" ((_dst).val), \
+ "=&r" (_tmp) \
+ : _by ((_src).val), "i" (EFLAGS_MASK) ); \
+ break; \
+ default: \
+ __emulate_2op_nobyte(_op, _src, _dst, _eflags, \
+ _wx, _wy, _lx, _ly, _qx, _qy); \
+ break; \
+ } \
+ } while (0)
+
+/* Source operand is byte-sized and may be restricted to just %cl. */
+#define emulate_2op_SrcB(_op, _src, _dst, _eflags) \
+ __emulate_2op(_op, _src, _dst, _eflags, \
+ "b", "c", "b", "c", "b", "c", "b", "c")
+
+/* Source operand is byte, word, long or quad sized. */
+#define emulate_2op_SrcV(_op, _src, _dst, _eflags) \
+ __emulate_2op(_op, _src, _dst, _eflags, \
+ "b", "q", "w", "r", _LO32, "r", "", "r")
+
+/* Source operand is word, long or quad sized. */
+#define emulate_2op_SrcV_nobyte(_op, _src, _dst, _eflags) \
+ __emulate_2op_nobyte(_op, _src, _dst, _eflags, \
+ "w", "r", _LO32, "r", "", "r")
+
+/* Instruction has only one explicit operand (no source operand). */
+#define emulate_1op(_op, _dst, _eflags) \
+ do { \
+ unsigned long _tmp; \
+ \
+ switch ( (_dst).bytes ) \
+ { \
+ case 1: \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0","3","2") \
+ _op"b %1; " \
+ _POST_EFLAGS("0","3","2") \
+ : "=m" (_eflags), "=m" ((_dst).val), \
+ "=&r" (_tmp) \
+ : "i" (EFLAGS_MASK) ); \
+ break; \
+ case 2: \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0","3","2") \
+ _op"w %1; " \
+ _POST_EFLAGS("0","3","2") \
+ : "=m" (_eflags), "=m" ((_dst).val), \
+ "=&r" (_tmp) \
+ : "i" (EFLAGS_MASK) ); \
+ break; \
+ case 4: \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0","3","2") \
+ _op"l %1; " \
+ _POST_EFLAGS("0","3","2") \
+ : "=m" (_eflags), "=m" ((_dst).val), \
+ "=&r" (_tmp) \
+ : "i" (EFLAGS_MASK) ); \
+ break; \
+ case 8: \
+ __emulate_1op_8byte(_op, _dst, _eflags); \
+ break; \
+ } \
+ } while (0)
+
+/* Emulate an instruction with quadword operands (x86/64 only). */
+#if defined(CONFIG_X86_64)
+#define __emulate_2op_8byte(_op, _src, _dst, _eflags, _qx, _qy) \
+ do { \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0","4","2") \
+ _op"q %"_qx"3,%1; " \
+ _POST_EFLAGS("0","4","2") \
+ : "=m" (_eflags), "=m" ((_dst).val), "=&r" (_tmp) \
+ : _qy ((_src).val), "i" (EFLAGS_MASK) ); \
+ } while (0)
+
+#define __emulate_1op_8byte(_op, _dst, _eflags) \
+ do { \
+ __asm__ __volatile__ ( \
+ _PRE_EFLAGS("0","3","2") \
+ _op"q %1; " \
+ _POST_EFLAGS("0","3","2") \
+ : "=m" (_eflags), "=m" ((_dst).val), "=&r" (_tmp) \
+ : "i" (EFLAGS_MASK) ); \
+ } while (0)
+
+#elif defined(__i386__)
+#define __emulate_2op_8byte(_op, _src, _dst, _eflags, _qx, _qy)
+#define __emulate_1op_8byte(_op, _dst, _eflags)
+#endif /* __i386__ */
+
+/* Fetch next part of the instruction being emulated. */
+#define insn_fetch(_type, _size, _eip) \
+({ unsigned long _x; \
+ rc = ops->read_std((unsigned long)(_eip) + ctxt->cs_base, &_x, \
+ (_size), ctxt); \
+ if ( rc != 0 ) \
+ goto done; \
+ (_eip) += (_size); \
+ (_type)_x; \
+})
+
+/* Access/update address held in a register, based on addressing mode. */
+#define register_address(base, reg) \
+ ((base) + ((ad_bytes == sizeof(unsigned long)) ? (reg) : \
+ ((reg) & ((1UL << (ad_bytes << 3)) - 1))))
+
+#define register_address_increment(reg, inc) \
+ do { \
+ /* signed type ensures sign extension to long */ \
+ int _inc = (inc); \
+ if ( ad_bytes == sizeof(unsigned long) ) \
+ (reg) += _inc; \
+ else \
+ (reg) = ((reg) & ~((1UL << (ad_bytes << 3)) - 1)) | \
+ (((reg) + _inc) & ((1UL << (ad_bytes << 3)) - 1)); \
+ } while (0)
+
+void *decode_register(u8 modrm_reg, unsigned long *regs,
+ int highbyte_regs)
+{
+ void *p;
+
+ p = ®s[modrm_reg];
+ if (highbyte_regs && modrm_reg >= 4 && modrm_reg < 8)
+ p = (unsigned char *)®s[modrm_reg & 3] + 1;
+ return p;
+}
+
+static int read_descriptor(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops,
+ void *ptr,
+ u16 *size, unsigned long *address, int op_bytes)
+{
+ int rc;
+
+ if (op_bytes == 2)
+ op_bytes = 3;
+ *address = 0;
+ rc = ops->read_std((unsigned long)ptr, (unsigned long *)size, 2, ctxt);
+ if (rc)
+ return rc;
+ rc = ops->read_std((unsigned long)ptr + 2, address, op_bytes, ctxt);
+ return rc;
+}
+
+int
+x86_emulate_memop(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
+{
+ u8 b, d, sib, twobyte = 0, rex_prefix = 0;
+ u8 modrm, modrm_mod = 0, modrm_reg = 0, modrm_rm = 0;
+ unsigned long *override_base = NULL;
+ unsigned int op_bytes, ad_bytes, lock_prefix = 0, rep_prefix = 0, i;
+ int rc = 0;
+ struct operand src, dst;
+ unsigned long cr2 = ctxt->cr2;
+ int mode = ctxt->mode;
+ unsigned long modrm_ea;
+ int use_modrm_ea, index_reg = 0, base_reg = 0, scale, rip_relative = 0;
+
+ /* Shadow copy of register state. Committed on successful emulation. */
+ unsigned long _regs[NR_VCPU_REGS];
+ unsigned long _eip = ctxt->vcpu->rip, _eflags = ctxt->eflags;
+ unsigned long modrm_val = 0;
+
+ memcpy(_regs, ctxt->vcpu->regs, sizeof _regs);
+
+ switch (mode) {
+ case X86EMUL_MODE_REAL:
+ case X86EMUL_MODE_PROT16:
+ op_bytes = ad_bytes = 2;
+ break;
+ case X86EMUL_MODE_PROT32:
+ op_bytes = ad_bytes = 4;
+ break;
+#ifdef CONFIG_X86_64
+ case X86EMUL_MODE_PROT64:
+ op_bytes = 4;
+ ad_bytes = 8;
+ break;
+#endif
+ default:
+ return -1;
+ }
+
+ /* Legacy prefixes. */
+ for (i = 0; i < 8; i++) {
+ switch (b = insn_fetch(u8, 1, _eip)) {
+ case 0x66: /* operand-size override */
+ op_bytes ^= 6; /* switch between 2/4 bytes */
+ break;
+ case 0x67: /* address-size override */
+ if (mode == X86EMUL_MODE_PROT64)
+ ad_bytes ^= 12; /* switch between 4/8 bytes */
+ else
+ ad_bytes ^= 6; /* switch between 2/4 bytes */
+ break;
+ case 0x2e: /* CS override */
+ override_base = &ctxt->cs_base;
+ break;
+ case 0x3e: /* DS override */
+ override_base = &ctxt->ds_base;
+ break;
+ case 0x26: /* ES override */
+ override_base = &ctxt->es_base;
+ break;
+ case 0x64: /* FS override */
+ override_base = &ctxt->fs_base;
+ break;
+ case 0x65: /* GS override */
+ override_base = &ctxt->gs_base;
+ break;
+ case 0x36: /* SS override */
+ override_base = &ctxt->ss_base;
+ break;
+ case 0xf0: /* LOCK */
+ lock_prefix = 1;
+ break;
+ case 0xf3: /* REP/REPE/REPZ */
+ rep_prefix = 1;
+ break;
+ case 0xf2: /* REPNE/REPNZ */
+ break;
+ default:
+ goto done_prefixes;
+ }
+ }
+
+done_prefixes:
+
+ /* REX prefix. */
+ if ((mode == X86EMUL_MODE_PROT64) && ((b & 0xf0) == 0x40)) {
+ rex_prefix = b;
+ if (b & 8)
+ op_bytes = 8; /* REX.W */
+ modrm_reg = (b & 4) << 1; /* REX.R */
+ index_reg = (b & 2) << 2; /* REX.X */
+ modrm_rm = base_reg = (b & 1) << 3; /* REG.B */
+ b = insn_fetch(u8, 1, _eip);
+ }
+
+ /* Opcode byte(s). */
+ d = opcode_table[b];
+ if (d == 0) {
+ /* Two-byte opcode? */
+ if (b == 0x0f) {
+ twobyte = 1;
+ b = insn_fetch(u8, 1, _eip);
+ d = twobyte_table[b];
+ }
+
+ /* Unrecognised? */
+ if (d == 0)
+ goto cannot_emulate;
+ }
+
+ /* ModRM and SIB bytes. */
+ if (d & ModRM) {
+ modrm = insn_fetch(u8, 1, _eip);
+ modrm_mod |= (modrm & 0xc0) >> 6;
+ modrm_reg |= (modrm & 0x38) >> 3;
+ modrm_rm |= (modrm & 0x07);
+ modrm_ea = 0;
+ use_modrm_ea = 1;
+
+ if (modrm_mod == 3) {
+ modrm_val = *(unsigned long *)
+ decode_register(modrm_rm, _regs, d & ByteOp);
+ goto modrm_done;
+ }
+
+ if (ad_bytes == 2) {
+ unsigned bx = _regs[VCPU_REGS_RBX];
+ unsigned bp = _regs[VCPU_REGS_RBP];
+ unsigned si = _regs[VCPU_REGS_RSI];
+ unsigned di = _regs[VCPU_REGS_RDI];
+
+ /* 16-bit ModR/M decode. */
+ switch (modrm_mod) {
+ case 0:
+ if (modrm_rm == 6)
+ modrm_ea += insn_fetch(u16, 2, _eip);
+ break;
+ case 1:
+ modrm_ea += insn_fetch(s8, 1, _eip);
+ break;
+ case 2:
+ modrm_ea += insn_fetch(u16, 2, _eip);
+ break;
+ }
+ switch (modrm_rm) {
+ case 0:
+ modrm_ea += bx + si;
+ break;
+ case 1:
+ modrm_ea += bx + di;
+ break;
+ case 2:
+ modrm_ea += bp + si;
+ break;
+ case 3:
+ modrm_ea += bp + di;
+ break;
+ case 4:
+ modrm_ea += si;
+ break;
+ case 5:
+ modrm_ea += di;
+ break;
+ case 6:
+ if (modrm_mod != 0)
+ modrm_ea += bp;
+ break;
+ case 7:
+ modrm_ea += bx;
+ break;
+ }
+ if (modrm_rm == 2 || modrm_rm == 3 ||
+ (modrm_rm == 6 && modrm_mod != 0))
+ if (!override_base)
+ override_base = &ctxt->ss_base;
+ modrm_ea = (u16)modrm_ea;
+ } else {
+ /* 32/64-bit ModR/M decode. */
+ switch (modrm_rm) {
+ case 4:
+ case 12:
+ sib = insn_fetch(u8, 1, _eip);
+ index_reg |= (sib >> 3) & 7;
+ base_reg |= sib & 7;
+ scale = sib >> 6;
+
+ switch (base_reg) {
+ case 5:
+ if (modrm_mod != 0)
+ modrm_ea += _regs[base_reg];
+ else
+ modrm_ea += insn_fetch(s32, 4, _eip);
+ break;
+ default:
+ modrm_ea += _regs[base_reg];
+ }
+ switch (index_reg) {
+ case 4:
+ break;
+ default:
+ modrm_ea += _regs[index_reg] << scale;
+
+ }
+ break;
+ case 5:
+ if (modrm_mod != 0)
+ modrm_ea += _regs[modrm_rm];
+ else if (mode == X86EMUL_MODE_PROT64)
+ rip_relative = 1;
+ break;
+ default:
+ modrm_ea += _regs[modrm_rm];
+ break;
+ }
+ switch (modrm_mod) {
+ case 0:
+ if (modrm_rm == 5)
+ modrm_ea += insn_fetch(s32, 4, _eip);
+ break;
+ case 1:
+ modrm_ea += insn_fetch(s8, 1, _eip);
+ break;
+ case 2:
+ modrm_ea += insn_fetch(s32, 4, _eip);
+ break;
+ }
+ }
+ if (!override_base)
+ override_base = &ctxt->ds_base;
+ if (mode == X86EMUL_MODE_PROT64 &&
+ override_base != &ctxt->fs_base &&
+ override_base != &ctxt->gs_base)
+ override_base = NULL;
+
+ if (override_base)
+ modrm_ea += *override_base;
+
+ if (rip_relative) {
+ modrm_ea += _eip;
+ switch (d & SrcMask) {
+ case SrcImmByte:
+ modrm_ea += 1;
+ break;
+ case SrcImm:
+ if (d & ByteOp)
+ modrm_ea += 1;
+ else
+ if (op_bytes == 8)
+ modrm_ea += 4;
+ else
+ modrm_ea += op_bytes;
+ }
+ }
+ if (ad_bytes != 8)
+ modrm_ea = (u32)modrm_ea;
+ cr2 = modrm_ea;
+ modrm_done:
+ ;
+ }
+
+ /* Decode and fetch the destination operand: register or memory. */
+ switch (d & DstMask) {
+ case ImplicitOps:
+ /* Special instructions do their own operand decoding. */
+ goto special_insn;
+ case DstReg:
+ dst.type = OP_REG;
+ if ((d & ByteOp)
+ && !(twobyte_table && (b == 0xb6 || b == 0xb7))) {
+ dst.ptr = decode_register(modrm_reg, _regs,
+ (rex_prefix == 0));
+ dst.val = *(u8 *) dst.ptr;
+ dst.bytes = 1;
+ } else {
+ dst.ptr = decode_register(modrm_reg, _regs, 0);
+ switch ((dst.bytes = op_bytes)) {
+ case 2:
+ dst.val = *(u16 *)dst.ptr;
+ break;
+ case 4:
+ dst.val = *(u32 *)dst.ptr;
+ break;
+ case 8:
+ dst.val = *(u64 *)dst.ptr;
+ break;
+ }
+ }
+ break;
+ case DstMem:
+ dst.type = OP_MEM;
+ dst.ptr = (unsigned long *)cr2;
+ dst.bytes = (d & ByteOp) ? 1 : op_bytes;
+ if (!(d & Mov) && /* optimisation - avoid slow emulated read */
+ ((rc = ops->read_emulated((unsigned long)dst.ptr,
+ &dst.val, dst.bytes, ctxt)) != 0))
+ goto done;
+ break;
+ }
+ dst.orig_val = dst.val;
+
+ /*
+ * Decode and fetch the source operand: register, memory
+ * or immediate.
+ */
+ switch (d & SrcMask) {
+ case SrcNone:
+ break;
+ case SrcReg:
+ src.type = OP_REG;
+ if (d & ByteOp) {
+ src.ptr = decode_register(modrm_reg, _regs,
+ (rex_prefix == 0));
+ src.val = src.orig_val = *(u8 *) src.ptr;
+ src.bytes = 1;
+ } else {
+ src.ptr = decode_register(modrm_reg, _regs, 0);
+ switch ((src.bytes = op_bytes)) {
+ case 2:
+ src.val = src.orig_val = *(u16 *) src.ptr;
+ break;
+ case 4:
+ src.val = src.orig_val = *(u32 *) src.ptr;
+ break;
+ case 8:
+ src.val = src.orig_val = *(u64 *) src.ptr;
+ break;
+ }
+ }
+ break;
+ case SrcMem16:
+ src.bytes = 2;
+ goto srcmem_common;
+ case SrcMem32:
+ src.bytes = 4;
+ goto srcmem_common;
+ case SrcMem:
+ src.bytes = (d & ByteOp) ? 1 : op_bytes;
+ srcmem_common:
+ src.type = OP_MEM;
+ src.ptr = (unsigned long *)cr2;
+ if ((rc = ops->read_emulated((unsigned long)src.ptr,
+ &src.val, src.bytes, ctxt)) != 0)
+ goto done;
+ src.orig_val = src.val;
+ break;
+ case SrcImm:
+ src.type = OP_IMM;
+ src.ptr = (unsigned long *)_eip;
+ src.bytes = (d & ByteOp) ? 1 : op_bytes;
+ if (src.bytes == 8)
+ src.bytes = 4;
+ /* NB. Immediates are sign-extended as necessary. */
+ switch (src.bytes) {
+ case 1:
+ src.val = insn_fetch(s8, 1, _eip);
+ break;
+ case 2:
+ src.val = insn_fetch(s16, 2, _eip);
+ break;
+ case 4:
+ src.val = insn_fetch(s32, 4, _eip);
+ break;
+ }
+ break;
+ case SrcImmByte:
+ src.type = OP_IMM;
+ src.ptr = (unsigned long *)_eip;
+ src.bytes = 1;
+ src.val = insn_fetch(s8, 1, _eip);
+ break;
+ }
+
+ if (twobyte)
+ goto twobyte_insn;
+
+ switch (b) {
+ case 0x00 ... 0x05:
+ add: /* add */
+ emulate_2op_SrcV("add", src, dst, _eflags);
+ break;
+ case 0x08 ... 0x0d:
+ or: /* or */
+ emulate_2op_SrcV("or", src, dst, _eflags);
+ break;
+ case 0x10 ... 0x15:
+ adc: /* adc */
+ emulate_2op_SrcV("adc", src, dst, _eflags);
+ break;
+ case 0x18 ... 0x1d:
+ sbb: /* sbb */
+ emulate_2op_SrcV("sbb", src, dst, _eflags);
+ break;
+ case 0x20 ... 0x25:
+ and: /* and */
+ emulate_2op_SrcV("and", src, dst, _eflags);
+ break;
+ case 0x28 ... 0x2d:
+ sub: /* sub */
+ emulate_2op_SrcV("sub", src, dst, _eflags);
+ break;
+ case 0x30 ... 0x35:
+ xor: /* xor */
+ emulate_2op_SrcV("xor", src, dst, _eflags);
+ break;
+ case 0x38 ... 0x3d:
+ cmp: /* cmp */
+ emulate_2op_SrcV("cmp", src, dst, _eflags);
+ break;
+ case 0x63: /* movsxd */
+ if (mode != X86EMUL_MODE_PROT64)
+ goto cannot_emulate;
+ dst.val = (s32) src.val;
+ break;
+ case 0x80 ... 0x83: /* Grp1 */
+ switch (modrm_reg) {
+ case 0:
+ goto add;
+ case 1:
+ goto or;
+ case 2:
+ goto adc;
+ case 3:
+ goto sbb;
+ case 4:
+ goto and;
+ case 5:
+ goto sub;
+ case 6:
+ goto xor;
+ case 7:
+ goto cmp;
+ }
+ break;
+ case 0x84 ... 0x85:
+ test: /* test */
+ emulate_2op_SrcV("test", src, dst, _eflags);
+ break;
+ case 0x86 ... 0x87: /* xchg */
+ /* Write back the register source. */
+ switch (dst.bytes) {
+ case 1:
+ *(u8 *) src.ptr = (u8) dst.val;
+ break;
+ case 2:
+ *(u16 *) src.ptr = (u16) dst.val;
+ break;
+ case 4:
+ *src.ptr = (u32) dst.val;
+ break; /* 64b reg: zero-extend */
+ case 8:
+ *src.ptr = dst.val;
+ break;
+ }
+ /*
+ * Write back the memory destination with implicit LOCK
+ * prefix.
+ */
+ dst.val = src.val;
+ lock_prefix = 1;
+ break;
+ case 0xa0 ... 0xa1: /* mov */
+ dst.ptr = (unsigned long *)&_regs[VCPU_REGS_RAX];
+ dst.val = src.val;
+ _eip += ad_bytes; /* skip src displacement */
+ break;
+ case 0xa2 ... 0xa3: /* mov */
+ dst.val = (unsigned long)_regs[VCPU_REGS_RAX];
+ _eip += ad_bytes; /* skip dst displacement */
+ break;
+ case 0x88 ... 0x8b: /* mov */
+ case 0xc6 ... 0xc7: /* mov (sole member of Grp11) */
+ dst.val = src.val;
+ break;
+ case 0x8f: /* pop (sole member of Grp1a) */
+ /* 64-bit mode: POP always pops a 64-bit operand. */
+ if (mode == X86EMUL_MODE_PROT64)
+ dst.bytes = 8;
+ if ((rc = ops->read_std(register_address(ctxt->ss_base,
+ _regs[VCPU_REGS_RSP]),
+ &dst.val, dst.bytes, ctxt)) != 0)
+ goto done;
+ register_address_increment(_regs[VCPU_REGS_RSP], dst.bytes);
+ break;
+ case 0xc0 ... 0xc1:
+ grp2: /* Grp2 */
+ switch (modrm_reg) {
+ case 0: /* rol */
+ emulate_2op_SrcB("rol", src, dst, _eflags);
+ break;
+ case 1: /* ror */
+ emulate_2op_SrcB("ror", src, dst, _eflags);
+ break;
+ case 2: /* rcl */
+ emulate_2op_SrcB("rcl", src, dst, _eflags);
+ break;
+ case 3: /* rcr */
+ emulate_2op_SrcB("rcr", src, dst, _eflags);
+ break;
+ case 4: /* sal/shl */
+ case 6: /* sal/shl */
+ emulate_2op_SrcB("sal", src, dst, _eflags);
+ break;
+ case 5: /* shr */
+ emulate_2op_SrcB("shr", src, dst, _eflags);
+ break;
+ case 7: /* sar */
+ emulate_2op_SrcB("sar", src, dst, _eflags);
+ break;
+ }
+ break;
+ case 0xd0 ... 0xd1: /* Grp2 */
+ src.val = 1;
+ goto grp2;
+ case 0xd2 ... 0xd3: /* Grp2 */
+ src.val = _regs[VCPU_REGS_RCX];
+ goto grp2;
+ case 0xf6 ... 0xf7: /* Grp3 */
+ switch (modrm_reg) {
+ case 0 ... 1: /* test */
+ /*
+ * Special case in Grp3: test has an immediate
+ * source operand.
+ */
+ src.type = OP_IMM;
+ src.ptr = (unsigned long *)_eip;
+ src.bytes = (d & ByteOp) ? 1 : op_bytes;
+ if (src.bytes == 8)
+ src.bytes = 4;
+ switch (src.bytes) {
+ case 1:
+ src.val = insn_fetch(s8, 1, _eip);
+ break;
+ case 2:
+ src.val = insn_fetch(s16, 2, _eip);
+ break;
+ case 4:
+ src.val = insn_fetch(s32, 4, _eip);
+ break;
+ }
+ goto test;
+ case 2: /* not */
+ dst.val = ~dst.val;
+ break;
+ case 3: /* neg */
+ emulate_1op("neg", dst, _eflags);
+ break;
+ default:
+ goto cannot_emulate;
+ }
+ break;
+ case 0xfe ... 0xff: /* Grp4/Grp5 */
+ switch (modrm_reg) {
+ case 0: /* inc */
+ emulate_1op("inc", dst, _eflags);
+ break;
+ case 1: /* dec */
+ emulate_1op("dec", dst, _eflags);
+ break;
+ case 6: /* push */
+ /* 64-bit mode: PUSH always pushes a 64-bit operand. */
+ if (mode == X86EMUL_MODE_PROT64) {
+ dst.bytes = 8;
+ if ((rc = ops->read_std((unsigned long)dst.ptr,
+ &dst.val, 8,
+ ctxt)) != 0)
+ goto done;
+ }
+ register_address_increment(_regs[VCPU_REGS_RSP],
+ -dst.bytes);
+ if ((rc = ops->write_std(
+ register_address(ctxt->ss_base,
+ _regs[VCPU_REGS_RSP]),
+ dst.val, dst.bytes, ctxt)) != 0)
+ goto done;
+ dst.val = dst.orig_val; /* skanky: disable writeback */
+ break;
+ default:
+ goto cannot_emulate;
+ }
+ break;
+ }
+
+writeback:
+ if ((d & Mov) || (dst.orig_val != dst.val)) {
+ switch (dst.type) {
+ case OP_REG:
+ /* The 4-byte case *is* correct: in 64-bit mode we zero-extend. */
+ switch (dst.bytes) {
+ case 1:
+ *(u8 *)dst.ptr = (u8)dst.val;
+ break;
+ case 2:
+ *(u16 *)dst.ptr = (u16)dst.val;
+ break;
+ case 4:
+ *dst.ptr = (u32)dst.val;
+ break; /* 64b: zero-ext */
+ case 8:
+ *dst.ptr = dst.val;
+ break;
+ }
+ break;
+ case OP_MEM:
+ if (lock_prefix)
+ rc = ops->cmpxchg_emulated((unsigned long)dst.
+ ptr, dst.orig_val,
+ dst.val, dst.bytes,
+ ctxt);
+ else
+ rc = ops->write_emulated((unsigned long)dst.ptr,
+ dst.val, dst.bytes,
+ ctxt);
+ if (rc != 0)
+ goto done;
+ default:
+ break;
+ }
+ }
+
+ /* Commit shadow register state. */
+ memcpy(ctxt->vcpu->regs, _regs, sizeof _regs);
+ ctxt->eflags = _eflags;
+ ctxt->vcpu->rip = _eip;
+
+done:
+ return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
+
+special_insn:
+ if (twobyte)
+ goto twobyte_special_insn;
+ if (rep_prefix) {
+ if (_regs[VCPU_REGS_RCX] == 0) {
+ ctxt->vcpu->rip = _eip;
+ goto done;
+ }
+ _regs[VCPU_REGS_RCX]--;
+ _eip = ctxt->vcpu->rip;
+ }
+ switch (b) {
+ case 0xa4 ... 0xa5: /* movs */
+ dst.type = OP_MEM;
+ dst.bytes = (d & ByteOp) ? 1 : op_bytes;
+ dst.ptr = (unsigned long *)register_address(ctxt->es_base,
+ _regs[VCPU_REGS_RDI]);
+ if ((rc = ops->read_emulated(register_address(
+ override_base ? *override_base : ctxt->ds_base,
+ _regs[VCPU_REGS_RSI]), &dst.val, dst.bytes, ctxt)) != 0)
+ goto done;
+ register_address_increment(_regs[VCPU_REGS_RSI],
+ (_eflags & EFLG_DF) ? -dst.bytes : dst.bytes);
+ register_address_increment(_regs[VCPU_REGS_RDI],
+ (_eflags & EFLG_DF) ? -dst.bytes : dst.bytes);
+ break;
+ case 0xa6 ... 0xa7: /* cmps */
+ DPRINTF("Urk! I don't handle CMPS.\n");
+ goto cannot_emulate;
+ case 0xaa ... 0xab: /* stos */
+ dst.type = OP_MEM;
+ dst.bytes = (d & ByteOp) ? 1 : op_bytes;
+ dst.ptr = (unsigned long *)cr2;
+ dst.val = _regs[VCPU_REGS_RAX];
+ register_address_increment(_regs[VCPU_REGS_RDI],
+ (_eflags & EFLG_DF) ? -dst.bytes : dst.bytes);
+ break;
+ case 0xac ... 0xad: /* lods */
+ dst.type = OP_REG;
+ dst.bytes = (d & ByteOp) ? 1 : op_bytes;
+ dst.ptr = (unsigned long *)&_regs[VCPU_REGS_RAX];
+ if ((rc = ops->read_emulated(cr2, &dst.val, dst.bytes, ctxt)) != 0)
+ goto done;
+ register_address_increment(_regs[VCPU_REGS_RSI],
+ (_eflags & EFLG_DF) ? -dst.bytes : dst.bytes);
+ break;
+ case 0xae ... 0xaf: /* scas */
+ DPRINTF("Urk! I don't handle SCAS.\n");
+ goto cannot_emulate;
+ }
+ goto writeback;
+
+twobyte_insn:
+ switch (b) {
+ case 0x01: /* lgdt, lidt, lmsw */
+ switch (modrm_reg) {
+ u16 size;
+ unsigned long address;
+
+ case 2: /* lgdt */
+ rc = read_descriptor(ctxt, ops, src.ptr,
+ &size, &address, op_bytes);
+ if (rc)
+ goto done;
+ realmode_lgdt(ctxt->vcpu, size, address);
+ break;
+ case 3: /* lidt */
+ rc = read_descriptor(ctxt, ops, src.ptr,
+ &size, &address, op_bytes);
+ if (rc)
+ goto done;
+ realmode_lidt(ctxt->vcpu, size, address);
+ break;
+ case 4: /* smsw */
+ if (modrm_mod != 3)
+ goto cannot_emulate;
+ *(u16 *)&_regs[modrm_rm]
+ = realmode_get_cr(ctxt->vcpu, 0);
+ break;
+ case 6: /* lmsw */
+ if (modrm_mod != 3)
+ goto cannot_emulate;
+ realmode_lmsw(ctxt->vcpu, (u16)modrm_val, &_eflags);
+ break;
+ case 7: /* invlpg*/
+ emulate_invlpg(ctxt->vcpu, cr2);
+ break;
+ default:
+ goto cannot_emulate;
+ }
+ break;
+ case 0x21: /* mov from dr to reg */
+ if (modrm_mod != 3)
+ goto cannot_emulate;
+ rc = emulator_get_dr(ctxt, modrm_reg, &_regs[modrm_rm]);
+ break;
+ case 0x23: /* mov from reg to dr */
+ if (modrm_mod != 3)
+ goto cannot_emulate;
+ rc = emulator_set_dr(ctxt, modrm_reg, _regs[modrm_rm]);
+ break;
+ case 0x40 ... 0x4f: /* cmov */
+ dst.val = dst.orig_val = src.val;
+ d &= ~Mov; /* default to no move */
+ /*
+ * First, assume we're decoding an even cmov opcode
+ * (lsb == 0).
+ */
+ switch ((b & 15) >> 1) {
+ case 0: /* cmovo */
+ d |= (_eflags & EFLG_OF) ? Mov : 0;
+ break;
+ case 1: /* cmovb/cmovc/cmovnae */
+ d |= (_eflags & EFLG_CF) ? Mov : 0;
+ break;
+ case 2: /* cmovz/cmove */
+ d |= (_eflags & EFLG_ZF) ? Mov : 0;
+ break;
+ case 3: /* cmovbe/cmovna */
+ d |= (_eflags & (EFLG_CF | EFLG_ZF)) ? Mov : 0;
+ break;
+ case 4: /* cmovs */
+ d |= (_eflags & EFLG_SF) ? Mov : 0;
+ break;
+ case 5: /* cmovp/cmovpe */
+ d |= (_eflags & EFLG_PF) ? Mov : 0;
+ break;
+ case 7: /* cmovle/cmovng */
+ d |= (_eflags & EFLG_ZF) ? Mov : 0;
+ /* fall through */
+ case 6: /* cmovl/cmovnge */
+ d |= (!(_eflags & EFLG_SF) !=
+ !(_eflags & EFLG_OF)) ? Mov : 0;
+ break;
+ }
+ /* Odd cmov opcodes (lsb == 1) have inverted sense. */
+ d ^= (b & 1) ? Mov : 0;
+ break;
+ case 0xb0 ... 0xb1: /* cmpxchg */
+ /*
+ * Save real source value, then compare EAX against
+ * destination.
+ */
+ src.orig_val = src.val;
+ src.val = _regs[VCPU_REGS_RAX];
+ emulate_2op_SrcV("cmp", src, dst, _eflags);
+ /* Always write back. The question is: where to? */
+ d |= Mov;
+ if (_eflags & EFLG_ZF) {
+ /* Success: write back to memory. */
+ dst.val = src.orig_val;
+ } else {
+ /* Failure: write the value we saw to EAX. */
+ dst.type = OP_REG;
+ dst.ptr = (unsigned long *)&_regs[VCPU_REGS_RAX];
+ }
+ break;
+ case 0xa3:
+ bt: /* bt */
+ src.val &= (dst.bytes << 3) - 1; /* only subword offset */
+ emulate_2op_SrcV_nobyte("bt", src, dst, _eflags);
+ break;
+ case 0xb3:
+ btr: /* btr */
+ src.val &= (dst.bytes << 3) - 1; /* only subword offset */
+ emulate_2op_SrcV_nobyte("btr", src, dst, _eflags);
+ break;
+ case 0xab:
+ bts: /* bts */
+ src.val &= (dst.bytes << 3) - 1; /* only subword offset */
+ emulate_2op_SrcV_nobyte("bts", src, dst, _eflags);
+ break;
+ case 0xb6 ... 0xb7: /* movzx */
+ dst.bytes = op_bytes;
+ dst.val = (d & ByteOp) ? (u8) src.val : (u16) src.val;
+ break;
+ case 0xbb:
+ btc: /* btc */
+ src.val &= (dst.bytes << 3) - 1; /* only subword offset */
+ emulate_2op_SrcV_nobyte("btc", src, dst, _eflags);
+ break;
+ case 0xba: /* Grp8 */
+ switch (modrm_reg & 3) {
+ case 0:
+ goto bt;
+ case 1:
+ goto bts;
+ case 2:
+ goto btr;
+ case 3:
+ goto btc;
+ }
+ break;
+ case 0xbe ... 0xbf: /* movsx */
+ dst.bytes = op_bytes;
+ dst.val = (d & ByteOp) ? (s8) src.val : (s16) src.val;
+ break;
+ }
+ goto writeback;
+
+twobyte_special_insn:
+ /* Disable writeback. */
+ dst.orig_val = dst.val;
+ switch (b) {
+ case 0x0d: /* GrpP (prefetch) */
+ case 0x18: /* Grp16 (prefetch/nop) */
+ break;
+ case 0x06:
+ emulate_clts(ctxt->vcpu);
+ break;
+ case 0x20: /* mov cr, reg */
+ if (modrm_mod != 3)
+ goto cannot_emulate;
+ _regs[modrm_rm] = realmode_get_cr(ctxt->vcpu, modrm_reg);
+ break;
+ case 0x22: /* mov reg, cr */
+ if (modrm_mod != 3)
+ goto cannot_emulate;
+ realmode_set_cr(ctxt->vcpu, modrm_reg, modrm_val, &_eflags);
+ break;
+ case 0xc7: /* Grp9 (cmpxchg8b) */
+#if defined(__i386__)
+ {
+ unsigned long old_lo, old_hi;
+ if (((rc = ops->read_emulated(cr2 + 0, &old_lo, 4,
+ ctxt)) != 0)
+ || ((rc = ops->read_emulated(cr2 + 4, &old_hi, 4,
+ ctxt)) != 0))
+ goto done;
+ if ((old_lo != _regs[VCPU_REGS_RAX])
+ || (old_hi != _regs[VCPU_REGS_RDI])) {
+ _regs[VCPU_REGS_RAX] = old_lo;
+ _regs[VCPU_REGS_RDX] = old_hi;
+ _eflags &= ~EFLG_ZF;
+ } else if (ops->cmpxchg8b_emulated == NULL) {
+ rc = X86EMUL_UNHANDLEABLE;
+ goto done;
+ } else {
+ if ((rc = ops->cmpxchg8b_emulated(cr2, old_lo,
+ old_hi,
+ _regs[VCPU_REGS_RBX],
+ _regs[VCPU_REGS_RCX],
+ ctxt)) != 0)
+ goto done;
+ _eflags |= EFLG_ZF;
+ }
+ break;
+ }
+#elif defined(CONFIG_X86_64)
+ {
+ unsigned long old, new;
+ if ((rc = ops->read_emulated(cr2, &old, 8, ctxt)) != 0)
+ goto done;
+ if (((u32) (old >> 0) != (u32) _regs[VCPU_REGS_RAX]) ||
+ ((u32) (old >> 32) != (u32) _regs[VCPU_REGS_RDX])) {
+ _regs[VCPU_REGS_RAX] = (u32) (old >> 0);
+ _regs[VCPU_REGS_RDX] = (u32) (old >> 32);
+ _eflags &= ~EFLG_ZF;
+ } else {
+ new = (_regs[VCPU_REGS_RCX] << 32) | (u32) _regs[VCPU_REGS_RBX];
+ if ((rc = ops->cmpxchg_emulated(cr2, old,
+ new, 8, ctxt)) != 0)
+ goto done;
+ _eflags |= EFLG_ZF;
+ }
+ break;
+ }
+#endif
+ }
+ goto writeback;
+
+cannot_emulate:
+ DPRINTF("Cannot emulate %02x\n", b);
+ return -1;
+}
+
+#ifdef __XEN__
+
+#include <asm/mm.h>
+#include <asm/uaccess.h>
+
+int
+x86_emulate_read_std(unsigned long addr,
+ unsigned long *val,
+ unsigned int bytes, struct x86_emulate_ctxt *ctxt)
+{
+ unsigned int rc;
+
+ *val = 0;
+
+ if ((rc = copy_from_user((void *)val, (void *)addr, bytes)) != 0) {
+ propagate_page_fault(addr + bytes - rc, 0); /* read fault */
+ return X86EMUL_PROPAGATE_FAULT;
+ }
+
+ return X86EMUL_CONTINUE;
+}
+
+int
+x86_emulate_write_std(unsigned long addr,
+ unsigned long val,
+ unsigned int bytes, struct x86_emulate_ctxt *ctxt)
+{
+ unsigned int rc;
+
+ if ((rc = copy_to_user((void *)addr, (void *)&val, bytes)) != 0) {
+ propagate_page_fault(addr + bytes - rc, PGERR_write_access);
+ return X86EMUL_PROPAGATE_FAULT;
+ }
+
+ return X86EMUL_CONTINUE;
+}
+
+#endif
--- /dev/null
+/******************************************************************************
+ * x86_emulate.h
+ *
+ * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
+ *
+ * Copyright (c) 2005 Keir Fraser
+ *
+ * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
+ */
+
+#ifndef __X86_EMULATE_H__
+#define __X86_EMULATE_H__
+
+struct x86_emulate_ctxt;
+
+/*
+ * x86_emulate_ops:
+ *
+ * These operations represent the instruction emulator's interface to memory.
+ * There are two categories of operation: those that act on ordinary memory
+ * regions (*_std), and those that act on memory regions known to require
+ * special treatment or emulation (*_emulated).
+ *
+ * The emulator assumes that an instruction accesses only one 'emulated memory'
+ * location, that this location is the given linear faulting address (cr2), and
+ * that this is one of the instruction's data operands. Instruction fetches and
+ * stack operations are assumed never to access emulated memory. The emulator
+ * automatically deduces which operand of a string-move operation is accessing
+ * emulated memory, and assumes that the other operand accesses normal memory.
+ *
+ * NOTES:
+ * 1. The emulator isn't very smart about emulated vs. standard memory.
+ * 'Emulated memory' access addresses should be checked for sanity.
+ * 'Normal memory' accesses may fault, and the caller must arrange to
+ * detect and handle reentrancy into the emulator via recursive faults.
+ * Accesses may be unaligned and may cross page boundaries.
+ * 2. If the access fails (cannot emulate, or a standard access faults) then
+ * it is up to the memop to propagate the fault to the guest VM via
+ * some out-of-band mechanism, unknown to the emulator. The memop signals
+ * failure by returning X86EMUL_PROPAGATE_FAULT to the emulator, which will
+ * then immediately bail.
+ * 3. Valid access sizes are 1, 2, 4 and 8 bytes. On x86/32 systems only
+ * cmpxchg8b_emulated need support 8-byte accesses.
+ * 4. The emulator cannot handle 64-bit mode emulation on an x86/32 system.
+ */
+/* Access completed successfully: continue emulation as normal. */
+#define X86EMUL_CONTINUE 0
+/* Access is unhandleable: bail from emulation and return error to caller. */
+#define X86EMUL_UNHANDLEABLE 1
+/* Terminate emulation but return success to the caller. */
+#define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
+#define X86EMUL_RETRY_INSTR 2 /* retry the instruction for some reason */
+#define X86EMUL_CMPXCHG_FAILED 2 /* cmpxchg did not see expected value */
+struct x86_emulate_ops {
+ /*
+ * read_std: Read bytes of standard (non-emulated/special) memory.
+ * Used for instruction fetch, stack operations, and others.
+ * @addr: [IN ] Linear address from which to read.
+ * @val: [OUT] Value read from memory, zero-extended to 'u_long'.
+ * @bytes: [IN ] Number of bytes to read from memory.
+ */
+ int (*read_std)(unsigned long addr,
+ unsigned long *val,
+ unsigned int bytes, struct x86_emulate_ctxt * ctxt);
+
+ /*
+ * write_std: Write bytes of standard (non-emulated/special) memory.
+ * Used for stack operations, and others.
+ * @addr: [IN ] Linear address to which to write.
+ * @val: [IN ] Value to write to memory (low-order bytes used as
+ * required).
+ * @bytes: [IN ] Number of bytes to write to memory.
+ */
+ int (*write_std)(unsigned long addr,
+ unsigned long val,
+ unsigned int bytes, struct x86_emulate_ctxt * ctxt);
+
+ /*
+ * read_emulated: Read bytes from emulated/special memory area.
+ * @addr: [IN ] Linear address from which to read.
+ * @val: [OUT] Value read from memory, zero-extended to 'u_long'.
+ * @bytes: [IN ] Number of bytes to read from memory.
+ */
+ int (*read_emulated) (unsigned long addr,
+ unsigned long *val,
+ unsigned int bytes,
+ struct x86_emulate_ctxt * ctxt);
+
+ /*
+ * write_emulated: Read bytes from emulated/special memory area.
+ * @addr: [IN ] Linear address to which to write.
+ * @val: [IN ] Value to write to memory (low-order bytes used as
+ * required).
+ * @bytes: [IN ] Number of bytes to write to memory.
+ */
+ int (*write_emulated) (unsigned long addr,
+ unsigned long val,
+ unsigned int bytes,
+ struct x86_emulate_ctxt * ctxt);
+
+ /*
+ * cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
+ * emulated/special memory area.
+ * @addr: [IN ] Linear address to access.
+ * @old: [IN ] Value expected to be current at @addr.
+ * @new: [IN ] Value to write to @addr.
+ * @bytes: [IN ] Number of bytes to access using CMPXCHG.
+ */
+ int (*cmpxchg_emulated) (unsigned long addr,
+ unsigned long old,
+ unsigned long new,
+ unsigned int bytes,
+ struct x86_emulate_ctxt * ctxt);
+
+ /*
+ * cmpxchg8b_emulated: Emulate an atomic (LOCKed) CMPXCHG8B operation on an
+ * emulated/special memory area.
+ * @addr: [IN ] Linear address to access.
+ * @old: [IN ] Value expected to be current at @addr.
+ * @new: [IN ] Value to write to @addr.
+ * NOTES:
+ * 1. This function is only ever called when emulating a real CMPXCHG8B.
+ * 2. This function is *never* called on x86/64 systems.
+ * 2. Not defining this function (i.e., specifying NULL) is equivalent
+ * to defining a function that always returns X86EMUL_UNHANDLEABLE.
+ */
+ int (*cmpxchg8b_emulated) (unsigned long addr,
+ unsigned long old_lo,
+ unsigned long old_hi,
+ unsigned long new_lo,
+ unsigned long new_hi,
+ struct x86_emulate_ctxt * ctxt);
+};
+
+struct cpu_user_regs;
+
+struct x86_emulate_ctxt {
+ /* Register state before/after emulation. */
+ struct kvm_vcpu *vcpu;
+
+ /* Linear faulting address (if emulating a page-faulting instruction). */
+ unsigned long eflags;
+ unsigned long cr2;
+
+ /* Emulated execution mode, represented by an X86EMUL_MODE value. */
+ int mode;
+
+ unsigned long cs_base;
+ unsigned long ds_base;
+ unsigned long es_base;
+ unsigned long ss_base;
+ unsigned long gs_base;
+ unsigned long fs_base;
+};
+
+/* Execution mode, passed to the emulator. */
+#define X86EMUL_MODE_REAL 0 /* Real mode. */
+#define X86EMUL_MODE_PROT16 2 /* 16-bit protected mode. */
+#define X86EMUL_MODE_PROT32 4 /* 32-bit protected mode. */
+#define X86EMUL_MODE_PROT64 8 /* 64-bit (long) mode. */
+
+/* Host execution mode. */
+#if defined(__i386__)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT32
+#elif defined(CONFIG_X86_64)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT64
+#endif
+
+/*
+ * x86_emulate_memop: Emulate an instruction that faulted attempting to
+ * read/write a 'special' memory area.
+ * Returns -1 on failure, 0 on success.
+ */
+int x86_emulate_memop(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops);
+
+/*
+ * Given the 'reg' portion of a ModRM byte, and a register block, return a
+ * pointer into the block that addresses the relevant register.
+ * @highbyte_regs specifies whether to decode AH,CH,DH,BH.
+ */
+void *decode_register(u8 modrm_reg, unsigned long *regs,
+ int highbyte_regs);
+
+#endif /* __X86_EMULATE_H__ */
config LEDS_CLASS
tristate "LED Class Support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
- depends LEDS_CLASS && PXA_SHARP_C7xx
+ depends on LEDS_CLASS && PXA_SHARP_C7xx
help
This option enables support for the LEDs on Sharp Zaurus
SL-C7x0 series (C700, C750, C760, C860).
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
- depends LEDS_CLASS && SHARP_LOCOMO
+ depends on LEDS_CLASS && SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
config LEDS_SPITZ
tristate "LED Support for the Sharp SL-Cxx00 series"
- depends LEDS_CLASS && PXA_SHARP_Cxx00
+ depends on LEDS_CLASS && PXA_SHARP_Cxx00
help
This option enables support for the LEDs on Sharp Zaurus
SL-Cxx00 series (C1000, C3000, C3100).
config LEDS_IXP4XX
tristate "LED Support for GPIO connected LEDs on IXP4XX processors"
- depends LEDS_CLASS && ARCH_IXP4XX
+ depends on LEDS_CLASS && ARCH_IXP4XX
help
This option enables support for the LEDs connected to GPIO
outputs of the Intel IXP4XX processors. To be useful the
config LEDS_TOSA
tristate "LED Support for the Sharp SL-6000 series"
- depends LEDS_CLASS && PXA_SHARPSL
+ depends on LEDS_CLASS && PXA_SHARPSL
help
This option enables support for the LEDs on Sharp Zaurus
SL-6000 series.
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
- depends LEDS_CLASS && MACH_AMS_DELTA
+ depends on LEDS_CLASS && MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_TRIGGERS
bool "LED Trigger support"
- depends NEW_LEDS
+ depends on NEW_LEDS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. If unsure, say Y.
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends LEDS_TRIGGERS && BLK_DEV_IDEDISK
+ depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
- depends LEDS_TRIGGERS
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
config MAC_EMUMOUSEBTN
bool "Support for mouse button 2+3 emulation"
- depends on INPUT_ADBHID
help
This provides generic support for emulating the 2nd and 3rd mouse
button with keypresses. If you say Y here, the emulation is still
if (!access_ok(VERIFY_READ, buf, count))
return -EFAULT;
- req = (struct adb_request *) kmalloc(sizeof(struct adb_request),
+ req = kmalloc(sizeof(struct adb_request),
GFP_KERNEL);
if (req == NULL)
return -ENOMEM;
if (!hid || !input_dev) {
err = -ENOMEM;
goto fail;
-
}
sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id);
input_dev->keycode = hid->keycode;
- input_register_device(input_dev);
+ err = input_register_device(input_dev);
+ if (err)
+ goto fail;
if (default_id == ADB_KEYBOARD) {
/* HACK WARNING!! This should go away as soon there is an utility
return 0;
fail: input_free_device(input_dev);
- kfree(hid);
+ if (hid) {
+ kfree(hid->keycode);
+ kfree(hid);
+ }
adbhid[id] = NULL;
return err;
}
{
struct apm_user * as;
- as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
+ as = kmalloc(sizeof(*as), GFP_KERNEL);
if (as == NULL) {
printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
sizeof(*as));
static int emumousebtn_input_register(void)
{
+ int ret;
+
emumousebtn = input_allocate_device();
if (!emumousebtn)
return -ENOMEM;
emumousebtn->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
emumousebtn->relbit[0] = BIT(REL_X) | BIT(REL_Y);
- input_register_device(emumousebtn);
+ ret = input_register_device(emumousebtn);
+ if (ret)
+ input_free_device(emumousebtn);
- return 0;
+ return ret;
}
int __init mac_hid_init(void)
*/
tlen = sizeof(struct property) + len + 18;
- prop = kcalloc(tlen, 1, GFP_KERNEL);
+ prop = kzalloc(tlen, GFP_KERNEL);
if (prop == NULL)
return NULL;
hdr = (struct smu_sdbp_header *)(prop + 1);
n_pbook_pci_saves = npci;
if (npci == 0)
return;
- ps = (struct pci_save *) kmalloc(npci * sizeof(*ps), GFP_KERNEL);
+ ps = kmalloc(npci * sizeof(*ps), GFP_KERNEL);
pbook_pci_saves = ps;
if (ps == NULL)
return;
tristate "Crypt target support"
depends on BLK_DEV_DM && EXPERIMENTAL
select CRYPTO
+ select CRYPTO_CBC
---help---
This device-mapper target allows you to create a device that
transparently encrypts the data on it. You'll need to activate
if (!buf)
return NULL;
- d = file->f_dentry;
- v = file->f_vfsmnt;
+ d = file->f_path.dentry;
+ v = file->f_path.mnt;
buf = d_path(d, v, buf, count);
unsigned long count)
{
struct page *page = NULL;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct buffer_head *bh;
sector_t block;
bitmap_file_unmap(bitmap);
if (file) {
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
invalidate_inode_pages(inode->i_mapping);
fput(file);
}
bl->tail = bl2->tail;
}
+static inline void bio_list_merge_head(struct bio_list *bl,
+ struct bio_list *bl2)
+{
+ if (!bl2->head)
+ return;
+
+ if (bl->head)
+ bl2->tail->bi_next = bl->head;
+ else
+ bl->tail = bl2->tail;
+
+ bl->head = bl2->head;
+}
+
static inline struct bio *bio_list_pop(struct bio_list *bl)
{
struct bio *bio = bl->head;
const char *opts)
{
unsigned int bs = crypto_blkcipher_blocksize(cc->tfm);
- int log = long_log2(bs);
+ int log = ilog2(bs);
/* we need to calculate how far we must shift the sector count
* to get the cipher block count, we use this shift in _gen */
atomic_set(&io->pending, 0);
kcryptd_queue_io(io);
- return 0;
+ return DM_MAPIO_SUBMITTED;
}
static int crypt_status(struct dm_target *ti, status_type_t type,
static int emc_endio(struct bio *bio, unsigned int bytes_done, int error)
{
- struct path *path = bio->bi_private;
+ struct dm_path *path = bio->bi_private;
if (bio->bi_size)
return 1;
return 0;
}
-static struct bio *get_failover_bio(struct path *path, unsigned data_size)
+static struct bio *get_failover_bio(struct dm_path *path, unsigned data_size)
{
struct bio *bio;
struct page *page;
}
static struct request *get_failover_req(struct emc_handler *h,
- struct bio *bio, struct path *path)
+ struct bio *bio, struct dm_path *path)
{
struct request *rq;
struct block_device *bdev = bio->bi_bdev;
}
static struct request *emc_trespass_get(struct emc_handler *h,
- struct path *path)
+ struct dm_path *path)
{
struct bio *bio;
struct request *rq;
}
static void emc_pg_init(struct hw_handler *hwh, unsigned bypassed,
- struct path *path)
+ struct dm_path *path)
{
struct request *rq;
struct request_queue *q = bdev_get_queue(path->dev->bdev);
void (*destroy) (struct hw_handler *hwh);
void (*pg_init) (struct hw_handler *hwh, unsigned bypassed,
- struct path *path);
+ struct dm_path *path);
unsigned (*error) (struct hw_handler *hwh, struct bio *bio);
int (*status) (struct hw_handler *hwh, status_type_t type,
char *result, unsigned int maxlen);
*---------------------------------------------------------------*/
static inline void bio_set_region(struct bio *bio, unsigned region)
{
- bio->bi_io_vec[bio->bi_max_vecs - 1].bv_len = region;
+ bio->bi_io_vec[bio->bi_max_vecs].bv_len = region;
}
static inline unsigned bio_get_region(struct bio *bio)
{
- return bio->bi_io_vec[bio->bi_max_vecs - 1].bv_len;
+ return bio->bi_io_vec[bio->bi_max_vecs].bv_len;
}
/*-----------------------------------------------------------------
zero_fill_bio(bio);
dec_count(io, bio_get_region(bio), error);
+ bio->bi_max_vecs++;
bio_put(bio);
return 0;
while (remaining) {
/*
- * Allocate a suitably sized bio, we add an extra
- * bvec for bio_get/set_region().
+ * Allocate a suitably sized-bio: we add an extra
+ * bvec for bio_get/set_region() and decrement bi_max_vecs
+ * to hide it from bio_add_page().
*/
- num_bvecs = (remaining / (PAGE_SIZE >> 9)) + 2;
+ num_bvecs = (remaining / (PAGE_SIZE >> SECTOR_SHIFT)) + 2;
bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, _bios);
bio->bi_sector = where->sector + (where->count - remaining);
bio->bi_bdev = where->bdev;
bio->bi_end_io = endio;
bio->bi_private = io;
bio->bi_destructor = dm_bio_destructor;
+ bio->bi_max_vecs--;
bio_set_region(bio, region);
/*
}
/*
- * Drop the extra refence that we were holding to avoid
+ * Drop the extra reference that we were holding to avoid
* the io being completed too early.
*/
dec_count(io, 0, 0);
static int do_suspend(struct dm_ioctl *param)
{
int r = 0;
- int do_lockfs = 1;
+ unsigned suspend_flags = DM_SUSPEND_LOCKFS_FLAG;
struct mapped_device *md;
md = find_device(param);
return -ENXIO;
if (param->flags & DM_SKIP_LOCKFS_FLAG)
- do_lockfs = 0;
+ suspend_flags &= ~DM_SUSPEND_LOCKFS_FLAG;
+ if (param->flags & DM_NOFLUSH_FLAG)
+ suspend_flags |= DM_SUSPEND_NOFLUSH_FLAG;
if (!dm_suspended(md))
- r = dm_suspend(md, do_lockfs);
+ r = dm_suspend(md, suspend_flags);
if (!r)
r = __dev_status(md, param);
static int do_resume(struct dm_ioctl *param)
{
int r = 0;
- int do_lockfs = 1;
+ unsigned suspend_flags = DM_SUSPEND_LOCKFS_FLAG;
struct hash_cell *hc;
struct mapped_device *md;
struct dm_table *new_map;
if (new_map) {
/* Suspend if it isn't already suspended */
if (param->flags & DM_SKIP_LOCKFS_FLAG)
- do_lockfs = 0;
+ suspend_flags &= ~DM_SUSPEND_LOCKFS_FLAG;
+ if (param->flags & DM_NOFLUSH_FLAG)
+ suspend_flags |= DM_SUSPEND_NOFLUSH_FLAG;
if (!dm_suspended(md))
- dm_suspend(md, do_lockfs);
+ dm_suspend(md, suspend_flags);
r = dm_swap_table(md, new_map);
if (r) {
bio->bi_bdev = lc->dev->bdev;
bio->bi_sector = lc->start + (bio->bi_sector - ti->begin);
- return 1;
+ return DM_MAPIO_REMAPPED;
}
static int linear_status(struct dm_target *ti, status_type_t type,
struct dentry fake_dentry = {};
fake_file.f_mode = lc->dev->mode;
- fake_file.f_dentry = &fake_dentry;
+ fake_file.f_path.dentry = &fake_dentry;
fake_dentry.d_inode = bdev->bd_inode;
return blkdev_driver_ioctl(bdev->bd_inode, &fake_file, bdev->bd_disk, cmd, arg);
/* copy clean across to sync */
memcpy(lc->sync_bits, lc->clean_bits, size);
lc->sync_count = count_bits32(lc->clean_bits, lc->bitset_uint32_count);
+ lc->sync_search = 0;
/* set the correct number of regions in the header */
lc->header.nr_regions = lc->region_count;
return lc->region_size;
}
+static int core_resume(struct dirty_log *log)
+{
+ struct log_c *lc = (struct log_c *) log->context;
+ lc->sync_search = 0;
+ return 0;
+}
+
static int core_is_clean(struct dirty_log *log, region_t region)
{
struct log_c *lc = (struct log_c *) log->context;
return 1;
}
-static void core_complete_resync_work(struct dirty_log *log, region_t region,
- int success)
+static void core_set_region_sync(struct dirty_log *log, region_t region,
+ int in_sync)
{
struct log_c *lc = (struct log_c *) log->context;
log_clear_bit(lc, lc->recovering_bits, region);
- if (success) {
+ if (in_sync) {
log_set_bit(lc, lc->sync_bits, region);
lc->sync_count++;
- }
+ } else if (log_test_bit(lc->sync_bits, region)) {
+ lc->sync_count--;
+ log_clear_bit(lc, lc->sync_bits, region);
+ }
}
static region_t core_get_sync_count(struct dirty_log *log)
.module = THIS_MODULE,
.ctr = core_ctr,
.dtr = core_dtr,
+ .resume = core_resume,
.get_region_size = core_get_region_size,
.is_clean = core_is_clean,
.in_sync = core_in_sync,
.mark_region = core_mark_region,
.clear_region = core_clear_region,
.get_resync_work = core_get_resync_work,
- .complete_resync_work = core_complete_resync_work,
+ .set_region_sync = core_set_region_sync,
.get_sync_count = core_get_sync_count,
.status = core_status,
};
.mark_region = core_mark_region,
.clear_region = core_clear_region,
.get_resync_work = core_get_resync_work,
- .complete_resync_work = core_complete_resync_work,
+ .set_region_sync = core_set_region_sync,
.get_sync_count = core_get_sync_count,
.status = disk_status,
};
int (*get_resync_work)(struct dirty_log *log, region_t *region);
/*
- * This notifies the log that the resync of an area has
- * been completed. The log should then mark this region
- * as CLEAN.
+ * This notifies the log that the resync status of a region
+ * has changed. It also clears the region from the recovering
+ * list (if present).
*/
- void (*complete_resync_work)(struct dirty_log *log,
- region_t region, int success);
+ void (*set_region_sync)(struct dirty_log *log,
+ region_t region, int in_sync);
/*
* Returns the number of regions that are in sync.
struct priority_group *pg; /* Owning PG */
unsigned fail_count; /* Cumulative failure count */
- struct path path;
+ struct dm_path path;
};
#define path_to_pgpath(__pgp) container_of((__pgp), struct pgpath, path)
static int __choose_path_in_pg(struct multipath *m, struct priority_group *pg)
{
- struct path *path;
+ struct dm_path *path;
path = pg->ps.type->select_path(&pg->ps, &m->repeat_count);
if (!path)
m->current_pg = NULL;
}
+/*
+ * Check whether bios must be queued in the device-mapper core rather
+ * than here in the target.
+ *
+ * m->lock must be held on entry.
+ *
+ * If m->queue_if_no_path and m->saved_queue_if_no_path hold the
+ * same value then we are not between multipath_presuspend()
+ * and multipath_resume() calls and we have no need to check
+ * for the DMF_NOFLUSH_SUSPENDING flag.
+ */
+static int __must_push_back(struct multipath *m)
+{
+ return (m->queue_if_no_path != m->saved_queue_if_no_path &&
+ dm_noflush_suspending(m->ti));
+}
+
static int map_io(struct multipath *m, struct bio *bio, struct mpath_io *mpio,
unsigned was_queued)
{
- int r = 1;
+ int r = DM_MAPIO_REMAPPED;
unsigned long flags;
struct pgpath *pgpath;
!m->queue_io)
queue_work(kmultipathd, &m->process_queued_ios);
pgpath = NULL;
- r = 0;
- } else if (!pgpath)
- r = -EIO; /* Failed */
- else
+ r = DM_MAPIO_SUBMITTED;
+ } else if (pgpath)
bio->bi_bdev = pgpath->path.dev->bdev;
+ else if (__must_push_back(m))
+ r = DM_MAPIO_REQUEUE;
+ else
+ r = -EIO; /* Failed */
mpio->pgpath = pgpath;
r = map_io(m, bio, mpio, 1);
if (r < 0)
bio_endio(bio, bio->bi_size, r);
- else if (r == 1)
+ else if (r == DM_MAPIO_REMAPPED)
generic_make_request(bio);
+ else if (r == DM_MAPIO_REQUEUE)
+ bio_endio(bio, bio->bi_size, -EIO);
bio = next;
}
map_context->ptr = mpio;
bio->bi_rw |= (1 << BIO_RW_FAILFAST);
r = map_io(m, bio, mpio, 0);
- if (r < 0)
+ if (r < 0 || r == DM_MAPIO_REQUEUE)
mempool_free(mpio, m->mpio_pool);
return r;
/*
* pg_init must call this when it has completed its initialisation
*/
-void dm_pg_init_complete(struct path *path, unsigned err_flags)
+void dm_pg_init_complete(struct dm_path *path, unsigned err_flags)
{
struct pgpath *pgpath = path_to_pgpath(path);
struct priority_group *pg = pgpath->pg;
spin_lock_irqsave(&m->lock, flags);
if (!m->nr_valid_paths) {
- if (!m->queue_if_no_path) {
+ if (__must_push_back(m)) {
+ spin_unlock_irqrestore(&m->lock, flags);
+ return DM_ENDIO_REQUEUE;
+ } else if (!m->queue_if_no_path) {
spin_unlock_irqrestore(&m->lock, flags);
return -EIO;
} else {
queue_work(kmultipathd, &m->process_queued_ios);
spin_unlock_irqrestore(&m->lock, flags);
- return 1; /* io not complete */
+ return DM_ENDIO_INCOMPLETE; /* io not complete */
}
static int multipath_end_io(struct dm_target *ti, struct bio *bio,
if (ps->type->end_io)
ps->type->end_io(ps, &pgpath->path);
}
- if (r <= 0)
+ if (r != DM_ENDIO_INCOMPLETE)
mempool_free(mpio, m->mpio_pool);
return r;
struct dentry fake_dentry = {};
int r = 0;
- fake_file.f_dentry = &fake_dentry;
+ fake_file.f_path.dentry = &fake_dentry;
spin_lock_irqsave(&m->lock, flags);
struct dm_dev;
-struct path {
+struct dm_path {
struct dm_dev *dev; /* Read-only */
unsigned is_active; /* Read-only */
};
/* Callback for hwh_pg_init_fn to use when complete */
-void dm_pg_init_complete(struct path *path, unsigned err_flags);
+void dm_pg_init_complete(struct dm_path *path, unsigned err_flags);
#endif
* Add an opaque path object, along with some selector specific
* path args (eg, path priority).
*/
- int (*add_path) (struct path_selector *ps, struct path *path,
+ int (*add_path) (struct path_selector *ps, struct dm_path *path,
int argc, char **argv, char **error);
/*
* calling the function again. 0 means don't call it again unless
* the path fails.
*/
- struct path *(*select_path) (struct path_selector *ps,
+ struct dm_path *(*select_path) (struct path_selector *ps,
unsigned *repeat_count);
/*
* Notify the selector that a path has failed.
*/
- void (*fail_path) (struct path_selector *ps, struct path *p);
+ void (*fail_path) (struct path_selector *ps, struct dm_path *p);
/*
* Ask selector to reinstate a path.
*/
- int (*reinstate_path) (struct path_selector *ps, struct path *p);
+ int (*reinstate_path) (struct path_selector *ps, struct dm_path *p);
/*
* Table content based on parameters added in ps_add_path_fn
* or path selector status
*/
- int (*status) (struct path_selector *ps, struct path *path,
+ int (*status) (struct path_selector *ps, struct dm_path *path,
status_type_t type, char *result, unsigned int maxlen);
- int (*end_io) (struct path_selector *ps, struct path *path);
+ int (*end_io) (struct path_selector *ps, struct dm_path *path);
};
/* Register a path selector */
}
}
+static void complete_resync_work(struct region *reg, int success)
+{
+ struct region_hash *rh = reg->rh;
+
+ rh->log->type->set_region_sync(rh->log, reg->key, success);
+ dispatch_bios(rh->ms, ®->delayed_bios);
+ if (atomic_dec_and_test(&rh->recovery_in_flight))
+ wake_up_all(&_kmirrord_recovery_stopped);
+ up(&rh->recovery_count);
+}
+
static void rh_update_states(struct region_hash *rh)
{
struct region *reg, *next;
*/
list_for_each_entry_safe (reg, next, &recovered, list) {
rh->log->type->clear_region(rh->log, reg->key);
- rh->log->type->complete_resync_work(rh->log, reg->key, 1);
- dispatch_bios(rh->ms, ®->delayed_bios);
- if (atomic_dec_and_test(&rh->recovery_in_flight))
- wake_up_all(&_kmirrord_recovery_stopped);
- up(&rh->recovery_count);
+ complete_resync_work(reg, 1);
mempool_free(reg, rh->region_pool);
}
if (rw == WRITE) {
queue_bio(ms, bio, rw);
- return 0;
+ return DM_MAPIO_SUBMITTED;
}
r = ms->rh.log->type->in_sync(ms->rh.log,
return r;
if (r == -EWOULDBLOCK) /* FIXME: ugly */
- r = 0;
+ r = DM_MAPIO_SUBMITTED;
/*
* We don't want to fast track a recovery just for a read
if (!r) {
/* Pass this io over to the daemon */
queue_bio(ms, bio, rw);
- return 0;
+ return DM_MAPIO_SUBMITTED;
}
m = choose_mirror(ms, bio->bi_sector);
return -EIO;
map_bio(ms, m, bio);
- return 1;
+ return DM_MAPIO_REMAPPED;
}
static int mirror_end_io(struct dm_target *ti, struct bio *bio,
*---------------------------------------------------------------*/
struct path_info {
struct list_head list;
- struct path *path;
+ struct dm_path *path;
unsigned repeat_count;
};
ps->context = NULL;
}
-static int rr_status(struct path_selector *ps, struct path *path,
+static int rr_status(struct path_selector *ps, struct dm_path *path,
status_type_t type, char *result, unsigned int maxlen)
{
struct path_info *pi;
* Called during initialisation to register each path with an
* optional repeat_count.
*/
-static int rr_add_path(struct path_selector *ps, struct path *path,
+static int rr_add_path(struct path_selector *ps, struct dm_path *path,
int argc, char **argv, char **error)
{
struct selector *s = (struct selector *) ps->context;
return 0;
}
-static void rr_fail_path(struct path_selector *ps, struct path *p)
+static void rr_fail_path(struct path_selector *ps, struct dm_path *p)
{
struct selector *s = (struct selector *) ps->context;
struct path_info *pi = p->pscontext;
list_move(&pi->list, &s->invalid_paths);
}
-static int rr_reinstate_path(struct path_selector *ps, struct path *p)
+static int rr_reinstate_path(struct path_selector *ps, struct dm_path *p)
{
struct selector *s = (struct selector *) ps->context;
struct path_info *pi = p->pscontext;
return 0;
}
-static struct path *rr_select_path(struct path_selector *ps,
+static struct dm_path *rr_select_path(struct path_selector *ps,
unsigned *repeat_count)
{
struct selector *s = (struct selector *) ps->context;
*/
#define SNAPSHOT_PAGES 256
-struct workqueue_struct *ksnapd;
+static struct workqueue_struct *ksnapd;
static void flush_queued_bios(struct work_struct *work);
struct pending_exception {
return r;
}
+static void __free_exceptions(struct dm_snapshot *s)
+{
+ kcopyd_client_destroy(s->kcopyd_client);
+ s->kcopyd_client = NULL;
+
+ exit_exception_table(&s->pending, pending_cache);
+ exit_exception_table(&s->complete, exception_cache);
+
+ s->store.destroy(&s->store);
+}
+
static void snapshot_dtr(struct dm_target *ti)
{
struct dm_snapshot *s = (struct dm_snapshot *) ti->private;
/* After this returns there can be no new kcopyd jobs. */
unregister_snapshot(s);
- kcopyd_client_destroy(s->kcopyd_client);
-
- exit_exception_table(&s->pending, pending_cache);
- exit_exception_table(&s->complete, exception_cache);
-
- /* Deallocate memory used */
- s->store.destroy(&s->store);
+ __free_exceptions(s);
dm_put_device(ti, s->origin);
dm_put_device(ti, s->cow);
{
struct exception *e;
struct dm_snapshot *s = (struct dm_snapshot *) ti->private;
- int r = 1;
+ int r = DM_MAPIO_REMAPPED;
chunk_t chunk;
struct pending_exception *pe = NULL;
remap_exception(s, &pe->e, bio);
bio_list_add(&pe->snapshot_bios, bio);
- r = 0;
+ r = DM_MAPIO_SUBMITTED;
if (!pe->started) {
/* this is protected by snap->lock */
*---------------------------------------------------------------*/
static int __origin_write(struct list_head *snapshots, struct bio *bio)
{
- int r = 1, first = 0;
+ int r = DM_MAPIO_REMAPPED, first = 0;
struct dm_snapshot *snap;
struct exception *e;
struct pending_exception *pe, *next_pe, *primary_pe = NULL;
bio_list_add(&primary_pe->origin_bios, bio);
- r = 0;
+ r = DM_MAPIO_SUBMITTED;
}
if (!pe->primary_pe) {
static int do_origin(struct dm_dev *origin, struct bio *bio)
{
struct origin *o;
- int r = 1;
+ int r = DM_MAPIO_REMAPPED;
down_read(&_origins_lock);
o = __lookup_origin(origin->bdev);
return -EOPNOTSUPP;
/* Only tell snapshots if this is a write */
- return (bio_rw(bio) == WRITE) ? do_origin(dev, bio) : 1;
+ return (bio_rw(bio) == WRITE) ? do_origin(dev, bio) : DM_MAPIO_REMAPPED;
}
#define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
bio->bi_bdev = sc->stripe[stripe].dev->bdev;
bio->bi_sector = sc->stripe[stripe].physical_start +
(chunk << sc->chunk_shift) + (offset & sc->chunk_mask);
- return 1;
+ return DM_MAPIO_REMAPPED;
}
static int stripe_status(struct dm_target *ti,
bio_endio(bio, bio->bi_size, 0);
/* accepted bio, don't make new request */
- return 0;
+ return DM_MAPIO_SUBMITTED;
}
static struct target_type zero_target = {
#define DMF_FROZEN 2
#define DMF_FREEING 3
#define DMF_DELETING 4
+#define DMF_NOFLUSH_SUSPENDING 5
struct mapped_device {
struct rw_semaphore io_lock;
struct semaphore suspend_lock;
+ spinlock_t pushback_lock;
rwlock_t map_lock;
atomic_t holders;
atomic_t open_count;
*/
atomic_t pending;
wait_queue_head_t wait;
- struct bio_list deferred;
+ struct bio_list deferred;
+ struct bio_list pushback;
/*
* The current mapping.
* you this clearly demarcated crap.
*---------------------------------------------------------------*/
+static int __noflush_suspending(struct mapped_device *md)
+{
+ return test_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
+}
+
/*
* Decrements the number of outstanding ios that a bio has been
* cloned into, completing the original io if necc.
*/
static void dec_pending(struct dm_io *io, int error)
{
- if (error)
+ unsigned long flags;
+
+ /* Push-back supersedes any I/O errors */
+ if (error && !(io->error > 0 && __noflush_suspending(io->md)))
io->error = error;
if (atomic_dec_and_test(&io->io_count)) {
+ if (io->error == DM_ENDIO_REQUEUE) {
+ /*
+ * Target requested pushing back the I/O.
+ * This must be handled before the sleeper on
+ * suspend queue merges the pushback list.
+ */
+ spin_lock_irqsave(&io->md->pushback_lock, flags);
+ if (__noflush_suspending(io->md))
+ bio_list_add(&io->md->pushback, io->bio);
+ else
+ /* noflush suspend was interrupted. */
+ io->error = -EIO;
+ spin_unlock_irqrestore(&io->md->pushback_lock, flags);
+ }
+
if (end_io_acct(io))
/* nudge anyone waiting on suspend queue */
wake_up(&io->md->wait);
- blk_add_trace_bio(io->md->queue, io->bio, BLK_TA_COMPLETE);
+ if (io->error != DM_ENDIO_REQUEUE) {
+ blk_add_trace_bio(io->md->queue, io->bio,
+ BLK_TA_COMPLETE);
+
+ bio_endio(io->bio, io->bio->bi_size, io->error);
+ }
- bio_endio(io->bio, io->bio->bi_size, io->error);
free_io(io->md, io);
}
}
if (endio) {
r = endio(tio->ti, bio, error, &tio->info);
- if (r < 0)
+ if (r < 0 || r == DM_ENDIO_REQUEUE)
+ /*
+ * error and requeue request are handled
+ * in dec_pending().
+ */
error = r;
-
- else if (r > 0)
- /* the target wants another shot at the io */
+ else if (r == DM_ENDIO_INCOMPLETE)
+ /* The target will handle the io */
return 1;
+ else if (r) {
+ DMWARN("unimplemented target endio return value: %d", r);
+ BUG();
+ }
}
dec_pending(tio->io, error);
atomic_inc(&tio->io->io_count);
sector = clone->bi_sector;
r = ti->type->map(ti, clone, &tio->info);
- if (r > 0) {
+ if (r == DM_MAPIO_REMAPPED) {
/* the bio has been remapped so dispatch it */
blk_add_trace_remap(bdev_get_queue(clone->bi_bdev), clone,
clone->bi_sector);
generic_make_request(clone);
- }
-
- else if (r < 0) {
- /* error the io and bail out */
+ } else if (r < 0 || r == DM_MAPIO_REQUEUE) {
+ /* error the io and bail out, or requeue it if needed */
md = tio->io->md;
dec_pending(tio->io, r);
/*
clone->bi_private = md->bs;
bio_put(clone);
free_tio(md, tio);
+ } else if (r) {
+ DMWARN("unimplemented target map return value: %d", r);
+ BUG();
}
}
memset(md, 0, sizeof(*md));
init_rwsem(&md->io_lock);
init_MUTEX(&md->suspend_lock);
+ spin_lock_init(&md->pushback_lock);
rwlock_init(&md->map_lock);
atomic_set(&md->holders, 1);
atomic_set(&md->open_count, 0);
md->queue->issue_flush_fn = dm_flush_all;
md->io_pool = mempool_create_slab_pool(MIN_IOS, _io_cache);
- if (!md->io_pool)
- goto bad2;
+ if (!md->io_pool)
+ goto bad2;
md->tio_pool = mempool_create_slab_pool(MIN_IOS, _tio_cache);
if (!md->tio_pool)
* dm_bind_table, dm_suspend must be called to flush any in
* flight bios and ensure that any further io gets deferred.
*/
-int dm_suspend(struct mapped_device *md, int do_lockfs)
+int dm_suspend(struct mapped_device *md, unsigned suspend_flags)
{
struct dm_table *map = NULL;
+ unsigned long flags;
DECLARE_WAITQUEUE(wait, current);
struct bio *def;
int r = -EINVAL;
+ int do_lockfs = suspend_flags & DM_SUSPEND_LOCKFS_FLAG ? 1 : 0;
+ int noflush = suspend_flags & DM_SUSPEND_NOFLUSH_FLAG ? 1 : 0;
down(&md->suspend_lock);
map = dm_get_table(md);
+ /*
+ * DMF_NOFLUSH_SUSPENDING must be set before presuspend.
+ * This flag is cleared before dm_suspend returns.
+ */
+ if (noflush)
+ set_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
+
/* This does not get reverted if there's an error later. */
dm_table_presuspend_targets(map);
if (!md->suspended_bdev) {
DMWARN("bdget failed in dm_suspend");
r = -ENOMEM;
- goto out;
+ goto flush_and_out;
}
- /* Flush I/O to the device. */
- if (do_lockfs) {
+ /*
+ * Flush I/O to the device.
+ * noflush supersedes do_lockfs, because lock_fs() needs to flush I/Os.
+ */
+ if (do_lockfs && !noflush) {
r = lock_fs(md);
if (r)
goto out;
down_write(&md->io_lock);
remove_wait_queue(&md->wait, &wait);
+ if (noflush) {
+ spin_lock_irqsave(&md->pushback_lock, flags);
+ clear_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
+ bio_list_merge_head(&md->deferred, &md->pushback);
+ bio_list_init(&md->pushback);
+ spin_unlock_irqrestore(&md->pushback_lock, flags);
+ }
+
/* were we interrupted ? */
r = -EINTR;
if (atomic_read(&md->pending)) {
__flush_deferred_io(md, def);
up_write(&md->io_lock);
unlock_fs(md);
- goto out;
+ goto out; /* pushback list is already flushed, so skip flush */
}
up_write(&md->io_lock);
r = 0;
+flush_and_out:
+ if (r && noflush) {
+ /*
+ * Because there may be already I/Os in the pushback list,
+ * flush them before return.
+ */
+ down_write(&md->io_lock);
+
+ spin_lock_irqsave(&md->pushback_lock, flags);
+ clear_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
+ bio_list_merge_head(&md->deferred, &md->pushback);
+ bio_list_init(&md->pushback);
+ spin_unlock_irqrestore(&md->pushback_lock, flags);
+
+ def = bio_list_get(&md->deferred);
+ __flush_deferred_io(md, def);
+ up_write(&md->io_lock);
+ }
+
out:
if (r && md->suspended_bdev) {
bdput(md->suspended_bdev);
return test_bit(DMF_SUSPENDED, &md->flags);
}
+int dm_noflush_suspending(struct dm_target *ti)
+{
+ struct mapped_device *md = dm_table_get_md(ti->table);
+ int r = __noflush_suspending(md);
+
+ dm_put(md);
+
+ return r;
+}
+EXPORT_SYMBOL_GPL(dm_noflush_suspending);
+
static struct block_device_operations dm_blk_dops = {
.open = dm_blk_open,
.release = dm_blk_close,
#define SECTOR_SHIFT 9
/*
+ * Definitions of return values from target end_io function.
+ */
+#define DM_ENDIO_INCOMPLETE 1
+#define DM_ENDIO_REQUEUE 2
+
+/*
+ * Definitions of return values from target map function.
+ */
+#define DM_MAPIO_SUBMITTED 0
+#define DM_MAPIO_REMAPPED 1
+#define DM_MAPIO_REQUEUE DM_ENDIO_REQUEUE
+
+/*
+ * Suspend feature flags
+ */
+#define DM_SUSPEND_LOCKFS_FLAG (1 << 0)
+#define DM_SUSPEND_NOFLUSH_FLAG (1 << 1)
+
+/*
* List of devices that a metadevice uses and should open/close.
*/
struct dm_dev {
conf_t *conf = (conf_t*)mddev->private;
int failit = 0;
- if (bio->bi_rw & 1) {
+ if (bio_data_dir(bio) == WRITE) {
/* write request */
if (atomic_read(&conf->counters[WriteAll])) {
/* special case - don't decrement, don't generic_make_request,
struct block_device *bdev;
char b[BDEVNAME_SIZE];
- bdev = open_partition_by_devnum(dev, FMODE_READ|FMODE_WRITE);
+ bdev = open_by_devnum(dev, FMODE_READ|FMODE_WRITE);
if (IS_ERR(bdev)) {
printk(KERN_ERR "md: could not open %s.\n",
__bdevname(dev, b));
if (err) {
printk(KERN_ERR "md: could not bd_claim %s.\n",
bdevname(bdev, b));
- blkdev_put_partition(bdev);
+ blkdev_put(bdev);
return err;
}
rdev->bdev = bdev;
if (!bdev)
MD_BUG();
bd_release(bdev);
- blkdev_put_partition(bdev);
+ blkdev_put(bdev);
}
void md_autodetect_dev(dev_t dev);
module_put(mddev->pers->owner);
mddev->pers = NULL;
+
+ set_capacity(disk, 0);
+ mddev->changed = 1;
+
if (mddev->ro)
mddev->ro = 0;
}
if (mode == 0) {
mdk_rdev_t *rdev;
struct list_head *tmp;
- struct gendisk *disk;
+
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
bitmap_destroy(mddev);
mddev->raid_disks = 0;
mddev->recovery_cp = 0;
- disk = mddev->gendisk;
- if (disk)
- set_capacity(disk, 0);
- mddev->changed = 1;
} else if (mddev->pers)
printk(KERN_INFO "md: %s switched to read-only mode.\n",
mdname(mddev));
return err;
}
+#ifndef MODULE
static void autorun_array(mddev_t *mddev)
{
mdk_rdev_t *rdev;
}
printk(KERN_INFO "md: ... autorun DONE.\n");
}
+#endif /* !MODULE */
static int get_version(void __user * arg)
{
if (err)
export_rdev(rdev);
+ md_update_sb(mddev, 1);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
return err;
mddev_t *mddev = inode->i_bdev->bd_disk->private_data;
int err;
- if ((err = mddev_lock(mddev)))
+ if ((err = mutex_lock_interruptible_nested(&mddev->reconfig_mutex, 1)))
goto out;
err = 0;
chunk_kb ? "KB" : "B");
if (bitmap->file) {
seq_printf(seq, ", file: ");
- seq_path(seq, bitmap->file->f_vfsmnt,
- bitmap->file->f_dentry," \t\n");
+ seq_path(seq, bitmap->file->f_path.mnt,
+ bitmap->file->f_path.dentry," \t\n");
}
seq_printf(seq, "\n");
mddev->pers->sync_request(mddev, max_sectors, &skipped, 1);
if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) &&
- test_bit(MD_RECOVERY_SYNC, &mddev->recovery) &&
!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
mddev->curr_resync > 2) {
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
rdev->recovery_offset = mddev->curr_resync;
}
}
+ set_bit(MD_CHANGE_DEVS, &mddev->flags);
skip:
mddev->curr_resync = 0;
autorun_devices(part);
}
-#endif
+#endif /* !MODULE */
static __exit void md_exit(void)
{
/* take from bio_init */
bio->bi_next = NULL;
bio->bi_flags |= 1 << BIO_UPTODATE;
- bio->bi_rw = 0;
+ bio->bi_rw = READ;
bio->bi_vcnt = 0;
bio->bi_idx = 0;
bio->bi_phys_segments = 0;
!test_bit(In_sync, &disk->rdev->flags)) {
disk->head_position = 0;
mddev->degraded++;
+ conf->fullsync = 1;
}
}
if (mddev->degraded == conf->raid_disks) {
biolist = bio;
bio->bi_private = r10_bio;
bio->bi_end_io = end_sync_read;
- bio->bi_rw = 0;
+ bio->bi_rw = READ;
bio->bi_sector = r10_bio->devs[j].addr +
conf->mirrors[d].rdev->data_offset;
bio->bi_bdev = conf->mirrors[d].rdev->bdev;
biolist = bio;
bio->bi_private = r10_bio;
bio->bi_end_io = end_sync_write;
- bio->bi_rw = 1;
+ bio->bi_rw = WRITE;
bio->bi_sector = r10_bio->devs[k].addr +
conf->mirrors[i].rdev->data_offset;
bio->bi_bdev = conf->mirrors[i].rdev->bdev;
biolist = bio;
bio->bi_private = r10_bio;
bio->bi_end_io = end_sync_read;
- bio->bi_rw = 0;
+ bio->bi_rw = READ;
bio->bi_sector = r10_bio->devs[i].addr +
conf->mirrors[d].rdev->data_offset;
bio->bi_bdev = conf->mirrors[d].rdev->bdev;
if (!test_bit(STRIPE_EXPANDING, &sh->state)) {
list_add_tail(&sh->lru, &conf->inactive_list);
wake_up(&conf->wait_for_stripe);
+ if (conf->retry_read_aligned)
+ md_wakeup_thread(conf->mddev->thread);
}
}
}
}
if (uptodate) {
-#if 0
- struct bio *bio;
- unsigned long flags;
- spin_lock_irqsave(&conf->device_lock, flags);
- /* we can return a buffer if we bypassed the cache or
- * if the top buffer is not in highmem. If there are
- * multiple buffers, leave the extra work to
- * handle_stripe
- */
- buffer = sh->bh_read[i];
- if (buffer &&
- (!PageHighMem(buffer->b_page)
- || buffer->b_page == bh->b_page )
- ) {
- sh->bh_read[i] = buffer->b_reqnext;
- buffer->b_reqnext = NULL;
- } else
- buffer = NULL;
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (sh->bh_page[i]==bh->b_page)
- set_buffer_uptodate(bh);
- if (buffer) {
- if (buffer->b_page != bh->b_page)
- memcpy(buffer->b_data, bh->b_data, bh->b_size);
- buffer->b_end_io(buffer, 1);
- }
-#else
set_bit(R5_UPTODATE, &sh->dev[i].flags);
-#endif
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
rdev = conf->disks[i].rdev;
printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
}
}
rdev_dec_pending(conf->disks[i].rdev, conf->mddev);
-#if 0
- /* must restore b_page before unlocking buffer... */
- if (sh->bh_page[i] != bh->b_page) {
- bh->b_page = sh->bh_page[i];
- bh->b_data = page_address(bh->b_page);
- clear_buffer_uptodate(bh);
- }
-#endif
clear_bit(R5_LOCKED, &sh->dev[i].flags);
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
static sector_t compute_blocknr(struct stripe_head *sh, int i)
{
raid5_conf_t *conf = sh->raid_conf;
- int raid_disks = sh->disks, data_disks = raid_disks - 1;
+ int raid_disks = sh->disks;
+ int data_disks = raid_disks - conf->max_degraded;
sector_t new_sector = sh->sector, check;
int sectors_per_chunk = conf->chunk_size >> 9;
sector_t stripe;
}
break;
case 6:
- data_disks = raid_disks - 2;
if (i == raid6_next_disk(sh->pd_idx, raid_disks))
return 0; /* It is the Q disk */
switch (conf->algorithm) {
int pd_idx, dd_idx;
int chunk_offset = sector_div(stripe, sectors_per_chunk);
- raid5_compute_sector(stripe*(disks-1)*sectors_per_chunk
- + chunk_offset, disks, disks-1, &dd_idx, &pd_idx, conf);
+ raid5_compute_sector(stripe * (disks - conf->max_degraded)
+ *sectors_per_chunk + chunk_offset,
+ disks, disks - conf->max_degraded,
+ &dd_idx, &pd_idx, conf);
return pd_idx;
}
} else if (test_bit(R5_Insync, &dev->flags)) {
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
-#if 0
- /* if I am just reading this block and we don't have
- a failed drive, or any pending writes then sidestep the cache */
- if (sh->bh_read[i] && !sh->bh_read[i]->b_reqnext &&
- ! syncing && !failed && !to_write) {
- sh->bh_cache[i]->b_page = sh->bh_read[i]->b_page;
- sh->bh_cache[i]->b_data = sh->bh_read[i]->b_data;
- }
-#endif
locked++;
PRINTK("Reading block %d (sync=%d)\n",
i, syncing);
dev = &sh->dev[i];
if ((dev->towrite || i == sh->pd_idx) &&
(!test_bit(R5_LOCKED, &dev->flags)
-#if 0
-|| sh->bh_page[i]!=bh->b_page
-#endif
) &&
!test_bit(R5_UPTODATE, &dev->flags)) {
if (test_bit(R5_Insync, &dev->flags)
/* Would I have to read this buffer for reconstruct_write */
if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx &&
(!test_bit(R5_LOCKED, &dev->flags)
-#if 0
-|| sh->bh_page[i] != bh->b_page
-#endif
) &&
!test_bit(R5_UPTODATE, &dev->flags)) {
if (test_bit(R5_Insync, &dev->flags)) rcw++;
return_bi = bi->bi_next;
bi->bi_next = NULL;
bi->bi_size = 0;
- bi->bi_end_io(bi, bytes, 0);
+ bi->bi_end_io(bi, bytes,
+ test_bit(BIO_UPTODATE, &bi->bi_flags)
+ ? 0 : -EIO);
}
for (i=disks; i-- ;) {
int rw;
struct bio *bi;
mdk_rdev_t *rdev;
if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags))
- rw = 1;
+ rw = WRITE;
else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
- rw = 0;
+ rw = READ;
else
continue;
bi = &sh->dev[i].req;
bi->bi_rw = rw;
- if (rw)
+ if (rw == WRITE)
bi->bi_end_io = raid5_end_write_request;
else
bi->bi_end_io = raid5_end_read_request;
atomic_add(STRIPE_SECTORS, &rdev->corrected_errors);
generic_make_request(bi);
} else {
- if (rw == 1)
+ if (rw == WRITE)
set_bit(STRIPE_DEGRADED, &sh->state);
PRINTK("skip op %ld on disc %d for sector %llu\n",
bi->bi_rw, i, (unsigned long long)sh->sector);
} else if (test_bit(R5_Insync, &dev->flags)) {
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
-#if 0
- /* if I am just reading this block and we don't have
- a failed drive, or any pending writes then sidestep the cache */
- if (sh->bh_read[i] && !sh->bh_read[i]->b_reqnext &&
- ! syncing && !failed && !to_write) {
- sh->bh_cache[i]->b_page = sh->bh_read[i]->b_page;
- sh->bh_cache[i]->b_data = sh->bh_read[i]->b_data;
- }
-#endif
locked++;
PRINTK("Reading block %d (sync=%d)\n",
i, syncing);
if (!test_bit(R5_OVERWRITE, &dev->flags)
&& i != pd_idx && i != qd_idx
&& (!test_bit(R5_LOCKED, &dev->flags)
-#if 0
- || sh->bh_page[i] != bh->b_page
-#endif
) &&
!test_bit(R5_UPTODATE, &dev->flags)) {
if (test_bit(R5_Insync, &dev->flags)) rcw++;
return_bi = bi->bi_next;
bi->bi_next = NULL;
bi->bi_size = 0;
- bi->bi_end_io(bi, bytes, 0);
+ bi->bi_end_io(bi, bytes,
+ test_bit(BIO_UPTODATE, &bi->bi_flags)
+ ? 0 : -EIO);
}
for (i=disks; i-- ;) {
int rw;
struct bio *bi;
mdk_rdev_t *rdev;
if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags))
- rw = 1;
+ rw = WRITE;
else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
- rw = 0;
+ rw = READ;
else
continue;
bi = &sh->dev[i].req;
bi->bi_rw = rw;
- if (rw)
+ if (rw == WRITE)
bi->bi_end_io = raid5_end_write_request;
else
bi->bi_end_io = raid5_end_read_request;
atomic_add(STRIPE_SECTORS, &rdev->corrected_errors);
generic_make_request(bi);
} else {
- if (rw == 1)
+ if (rw == WRITE)
set_bit(STRIPE_DEGRADED, &sh->state);
PRINTK("skip op %ld on disc %d for sector %llu\n",
bi->bi_rw, i, (unsigned long long)sh->sector);
return 0;
}
+/* We want read requests to align with chunks where possible,
+ * but write requests don't need to.
+ */
+static int raid5_mergeable_bvec(request_queue_t *q, struct bio *bio, struct bio_vec *biovec)
+{
+ mddev_t *mddev = q->queuedata;
+ sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
+ int max;
+ unsigned int chunk_sectors = mddev->chunk_size >> 9;
+ unsigned int bio_sectors = bio->bi_size >> 9;
+
+ if (bio_data_dir(bio) == WRITE)
+ return biovec->bv_len; /* always allow writes to be mergeable */
+
+ max = (chunk_sectors - ((sector & (chunk_sectors - 1)) + bio_sectors)) << 9;
+ if (max < 0) max = 0;
+ if (max <= biovec->bv_len && bio_sectors == 0)
+ return biovec->bv_len;
+ else
+ return max;
+}
+
+
+static int in_chunk_boundary(mddev_t *mddev, struct bio *bio)
+{
+ sector_t sector = bio->bi_sector + get_start_sect(bio->bi_bdev);
+ unsigned int chunk_sectors = mddev->chunk_size >> 9;
+ unsigned int bio_sectors = bio->bi_size >> 9;
+
+ return chunk_sectors >=
+ ((sector & (chunk_sectors - 1)) + bio_sectors);
+}
+
+/*
+ * add bio to the retry LIFO ( in O(1) ... we are in interrupt )
+ * later sampled by raid5d.
+ */
+static void add_bio_to_retry(struct bio *bi,raid5_conf_t *conf)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&conf->device_lock, flags);
+
+ bi->bi_next = conf->retry_read_aligned_list;
+ conf->retry_read_aligned_list = bi;
+
+ spin_unlock_irqrestore(&conf->device_lock, flags);
+ md_wakeup_thread(conf->mddev->thread);
+}
+
+
+static struct bio *remove_bio_from_retry(raid5_conf_t *conf)
+{
+ struct bio *bi;
+
+ bi = conf->retry_read_aligned;
+ if (bi) {
+ conf->retry_read_aligned = NULL;
+ return bi;
+ }
+ bi = conf->retry_read_aligned_list;
+ if(bi) {
+ conf->retry_read_aligned = bi->bi_next;
+ bi->bi_next = NULL;
+ bi->bi_phys_segments = 1; /* biased count of active stripes */
+ bi->bi_hw_segments = 0; /* count of processed stripes */
+ }
+
+ return bi;
+}
+
+
+/*
+ * The "raid5_align_endio" should check if the read succeeded and if it
+ * did, call bio_endio on the original bio (having bio_put the new bio
+ * first).
+ * If the read failed..
+ */
+static int raid5_align_endio(struct bio *bi, unsigned int bytes, int error)
+{
+ struct bio* raid_bi = bi->bi_private;
+ mddev_t *mddev;
+ raid5_conf_t *conf;
+ int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags);
+ mdk_rdev_t *rdev;
+
+ if (bi->bi_size)
+ return 1;
+ bio_put(bi);
+
+ mddev = raid_bi->bi_bdev->bd_disk->queue->queuedata;
+ conf = mddev_to_conf(mddev);
+ rdev = (void*)raid_bi->bi_next;
+ raid_bi->bi_next = NULL;
+
+ rdev_dec_pending(rdev, conf->mddev);
+
+ if (!error && uptodate) {
+ bio_endio(raid_bi, bytes, 0);
+ if (atomic_dec_and_test(&conf->active_aligned_reads))
+ wake_up(&conf->wait_for_stripe);
+ return 0;
+ }
+
+
+ PRINTK("raid5_align_endio : io error...handing IO for a retry\n");
+
+ add_bio_to_retry(raid_bi, conf);
+ return 0;
+}
+
+static int chunk_aligned_read(request_queue_t *q, struct bio * raid_bio)
+{
+ mddev_t *mddev = q->queuedata;
+ raid5_conf_t *conf = mddev_to_conf(mddev);
+ const unsigned int raid_disks = conf->raid_disks;
+ const unsigned int data_disks = raid_disks - conf->max_degraded;
+ unsigned int dd_idx, pd_idx;
+ struct bio* align_bi;
+ mdk_rdev_t *rdev;
+
+ if (!in_chunk_boundary(mddev, raid_bio)) {
+ printk("chunk_aligned_read : non aligned\n");
+ return 0;
+ }
+ /*
+ * use bio_clone to make a copy of the bio
+ */
+ align_bi = bio_clone(raid_bio, GFP_NOIO);
+ if (!align_bi)
+ return 0;
+ /*
+ * set bi_end_io to a new function, and set bi_private to the
+ * original bio.
+ */
+ align_bi->bi_end_io = raid5_align_endio;
+ align_bi->bi_private = raid_bio;
+ /*
+ * compute position
+ */
+ align_bi->bi_sector = raid5_compute_sector(raid_bio->bi_sector,
+ raid_disks,
+ data_disks,
+ &dd_idx,
+ &pd_idx,
+ conf);
+
+ rcu_read_lock();
+ rdev = rcu_dereference(conf->disks[dd_idx].rdev);
+ if (rdev && test_bit(In_sync, &rdev->flags)) {
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+ raid_bio->bi_next = (void*)rdev;
+ align_bi->bi_bdev = rdev->bdev;
+ align_bi->bi_flags &= ~(1 << BIO_SEG_VALID);
+ align_bi->bi_sector += rdev->data_offset;
+
+ spin_lock_irq(&conf->device_lock);
+ wait_event_lock_irq(conf->wait_for_stripe,
+ conf->quiesce == 0,
+ conf->device_lock, /* nothing */);
+ atomic_inc(&conf->active_aligned_reads);
+ spin_unlock_irq(&conf->device_lock);
+
+ generic_make_request(align_bi);
+ return 1;
+ } else {
+ rcu_read_unlock();
+ bio_put(align_bi);
+ return 0;
+ }
+}
+
+
static int make_request(request_queue_t *q, struct bio * bi)
{
mddev_t *mddev = q->queuedata;
disk_stat_inc(mddev->gendisk, ios[rw]);
disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bi));
+ if (rw == READ &&
+ mddev->reshape_position == MaxSector &&
+ chunk_aligned_read(q,bi))
+ return 0;
+
logical_sector = bi->bi_sector & ~((sector_t)STRIPE_SECTORS-1);
last_sector = bi->bi_sector + (bi->bi_size>>9);
bi->bi_next = NULL;
if ( rw == WRITE )
md_write_end(mddev);
bi->bi_size = 0;
- bi->bi_end_io(bi, bytes, 0);
+ bi->bi_end_io(bi, bytes,
+ test_bit(BIO_UPTODATE, &bi->bi_flags)
+ ? 0 : -EIO);
}
return 0;
}
return STRIPE_SECTORS;
}
+static int retry_aligned_read(raid5_conf_t *conf, struct bio *raid_bio)
+{
+ /* We may not be able to submit a whole bio at once as there
+ * may not be enough stripe_heads available.
+ * We cannot pre-allocate enough stripe_heads as we may need
+ * more than exist in the cache (if we allow ever large chunks).
+ * So we do one stripe head at a time and record in
+ * ->bi_hw_segments how many have been done.
+ *
+ * We *know* that this entire raid_bio is in one chunk, so
+ * it will be only one 'dd_idx' and only need one call to raid5_compute_sector.
+ */
+ struct stripe_head *sh;
+ int dd_idx, pd_idx;
+ sector_t sector, logical_sector, last_sector;
+ int scnt = 0;
+ int remaining;
+ int handled = 0;
+
+ logical_sector = raid_bio->bi_sector & ~((sector_t)STRIPE_SECTORS-1);
+ sector = raid5_compute_sector( logical_sector,
+ conf->raid_disks,
+ conf->raid_disks - conf->max_degraded,
+ &dd_idx,
+ &pd_idx,
+ conf);
+ last_sector = raid_bio->bi_sector + (raid_bio->bi_size>>9);
+
+ for (; logical_sector < last_sector;
+ logical_sector += STRIPE_SECTORS, scnt++) {
+
+ if (scnt < raid_bio->bi_hw_segments)
+ /* already done this stripe */
+ continue;
+
+ sh = get_active_stripe(conf, sector, conf->raid_disks, pd_idx, 1);
+
+ if (!sh) {
+ /* failed to get a stripe - must wait */
+ raid_bio->bi_hw_segments = scnt;
+ conf->retry_read_aligned = raid_bio;
+ return handled;
+ }
+
+ set_bit(R5_ReadError, &sh->dev[dd_idx].flags);
+ add_stripe_bio(sh, raid_bio, dd_idx, 0);
+ handle_stripe(sh, NULL);
+ release_stripe(sh);
+ handled++;
+ }
+ spin_lock_irq(&conf->device_lock);
+ remaining = --raid_bio->bi_phys_segments;
+ spin_unlock_irq(&conf->device_lock);
+ if (remaining == 0) {
+ int bytes = raid_bio->bi_size;
+
+ raid_bio->bi_size = 0;
+ raid_bio->bi_end_io(raid_bio, bytes,
+ test_bit(BIO_UPTODATE, &raid_bio->bi_flags)
+ ? 0 : -EIO);
+ }
+ if (atomic_dec_and_test(&conf->active_aligned_reads))
+ wake_up(&conf->wait_for_stripe);
+ return handled;
+}
+
+
+
/*
* This is our raid5 kernel thread.
*
spin_lock_irq(&conf->device_lock);
while (1) {
struct list_head *first;
+ struct bio *bio;
if (conf->seq_flush != conf->seq_write) {
int seq = conf->seq_flush;
!list_empty(&conf->delayed_list))
raid5_activate_delayed(conf);
+ while ((bio = remove_bio_from_retry(conf))) {
+ int ok;
+ spin_unlock_irq(&conf->device_lock);
+ ok = retry_aligned_read(conf, bio);
+ spin_lock_irq(&conf->device_lock);
+ if (!ok)
+ break;
+ handled++;
+ }
+
if (list_empty(&conf->handle_list))
break;
INIT_LIST_HEAD(&conf->inactive_list);
atomic_set(&conf->active_stripes, 0);
atomic_set(&conf->preread_active_stripes, 0);
+ atomic_set(&conf->active_aligned_reads, 0);
PRINTK("raid5: run(%s) called.\n", mdname(mddev));
mddev->array_size = mddev->size * (conf->previous_raid_disks -
conf->max_degraded);
+ blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
+
return 0;
abort:
if (conf) {
spin_lock_irq(&conf->device_lock);
conf->quiesce = 1;
wait_event_lock_irq(conf->wait_for_stripe,
- atomic_read(&conf->active_stripes) == 0,
+ atomic_read(&conf->active_stripes) == 0 &&
+ atomic_read(&conf->active_aligned_reads) == 0,
conf->device_lock, /* nothing */);
spin_unlock_irq(&conf->device_lock);
break;
config VIDEO_TUNER
tristate
+ depends on I2C
config VIDEO_BUF
tristate
config VIDEO_TVEEPROM
tristate
+ depends on I2C
config USB_DABUSB
tristate "DABUSB driver"
};
EXPORT_SYMBOL_GPL(ir_codes_norwood);
+
+/* From reading the following remotes:
+ * Zenith Universal 7 / TV Mode 807 / VCR Mode 837
+ * Hauppauge (from NOVA-CI-s box product)
+ * This is a "middle of the road" approach, differences are noted
+ */
+IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE] = {
+ [ 0x00 ] = KEY_0,
+ [ 0x01 ] = KEY_1,
+ [ 0x02 ] = KEY_2,
+ [ 0x03 ] = KEY_3,
+ [ 0x04 ] = KEY_4,
+ [ 0x05 ] = KEY_5,
+ [ 0x06 ] = KEY_6,
+ [ 0x07 ] = KEY_7,
+ [ 0x08 ] = KEY_8,
+ [ 0x09 ] = KEY_9,
+ [ 0x0a ] = KEY_ENTER,
+ [ 0x0b ] = KEY_RED,
+ [ 0x0c ] = KEY_POWER, /* RADIO on Hauppauge */
+ [ 0x0d ] = KEY_MUTE,
+ [ 0x0f ] = KEY_A, /* TV on Hauppauge */
+ [ 0x10 ] = KEY_VOLUMEUP,
+ [ 0x11 ] = KEY_VOLUMEDOWN,
+ [ 0x14 ] = KEY_B,
+ [ 0x1c ] = KEY_UP,
+ [ 0x1d ] = KEY_DOWN,
+ [ 0x1e ] = KEY_OPTION, /* RESERVED on Hauppauge */
+ [ 0x1f ] = KEY_BREAK,
+ [ 0x20 ] = KEY_CHANNELUP,
+ [ 0x21 ] = KEY_CHANNELDOWN,
+ [ 0x22 ] = KEY_PREVIOUS, /* Prev. Ch on Zenith, SOURCE on Hauppauge */
+ [ 0x24 ] = KEY_RESTART,
+ [ 0x25 ] = KEY_OK,
+ [ 0x26 ] = KEY_CYCLEWINDOWS, /* MINIMIZE on Hauppauge */
+ [ 0x28 ] = KEY_ENTER, /* VCR mode on Zenith */
+ [ 0x29 ] = KEY_PAUSE,
+ [ 0x2b ] = KEY_RIGHT,
+ [ 0x2c ] = KEY_LEFT,
+ [ 0x2e ] = KEY_MENU, /* FULL SCREEN on Hauppauge */
+ [ 0x30 ] = KEY_SLOW,
+ [ 0x31 ] = KEY_PREVIOUS, /* VCR mode on Zenith */
+ [ 0x32 ] = KEY_REWIND,
+ [ 0x34 ] = KEY_FASTFORWARD,
+ [ 0x35 ] = KEY_PLAY,
+ [ 0x36 ] = KEY_STOP,
+ [ 0x37 ] = KEY_RECORD,
+ [ 0x38 ] = KEY_TUNER, /* TV/VCR on Zenith */
+ [ 0x3a ] = KEY_C,
+ [ 0x3c ] = KEY_EXIT,
+ [ 0x3d ] = KEY_POWER2,
+ [ 0x3e ] = KEY_TUNER,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_budget_ci_old);
saa7146_write(dev, I2C_TRANSFER, *dword);
dev->i2c_op = 1;
+ SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
SAA7146_IER_ENABLE(dev, MASK_16|MASK_17);
saa7146_write(dev, MC2, (MASK_00 | MASK_16));
- wait_event_interruptible(dev->i2c_wq, dev->i2c_op == 0);
- if (signal_pending (current)) {
- /* a signal arrived */
- return -ERESTARTSYS;
+ timeout = HZ/100 + 1; /* 10ms */
+ timeout = wait_event_interruptible_timeout(dev->i2c_wq, dev->i2c_op == 0, timeout);
+ if (timeout == -ERESTARTSYS || dev->i2c_op) {
+ SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
+ SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
+ if (timeout == -ERESTARTSYS)
+ /* a signal arrived */
+ return -ERESTARTSYS;
+
+ printk(KERN_WARNING "saa7146_i2c_writeout: timed out waiting for end of xfer\n");
+ return -EIO;
}
status = saa7146_read(dev, I2C_STATUS);
} else {
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_BCM3510 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
help
Support for the digital TV receiver chip made by B2C2 Inc. included in
Technisats PCI cards and USB boxes.
#include "stv0297.h"
#include "mt312.h"
#include "lgdt330x.h"
-#include "lg_h06xf.h"
+#include "lgh06xf.h"
#include "dvb-pll.h"
/* lnb control */
return request_firmware(fw, name, fc->dev);
}
-static int lgdt3303_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
-{
- struct flexcop_device *fc = fe->dvb->priv;
- return lg_h06xf_pll_set(fe, &fc->i2c_adap, params);
-}
-
static struct lgdt330x_config air2pc_atsc_hd5000_config = {
.demod_address = 0x59,
.demod_chip = LGDT3303,
/* try the air atsc 3nd generation (lgdt3303) */
if ((fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) {
fc->dev_type = FC_AIR_ATSC3;
- fc->fe->ops.tuner_ops.set_params = lgdt3303_tuner_set_params;
+ dvb_attach(lgh06xf_attach, fc->fe, &fc->i2c_adap);
info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address);
} else
/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
config DVB_BT8XX
tristate "BT8xx based PCI cards"
depends on DVB_CORE && PCI && I2C && VIDEO_BT848
- select DVB_PLL
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_SP887X if !DVB_FE_CUSTOMISE
select DVB_NXT6000 if !DVB_FE_CUSTOMISE
select DVB_CX24110 if !DVB_FE_CUSTOMISE
select DVB_OR51211 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select FW_LOADER
help
struct ca_msg *hw_buffer;
int result = 0;
- if ((hw_buffer = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) {
+ if ((hw_buffer = kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) {
dprintk(verbose, DST_CA_ERROR, 1, " Memory allocation failure");
return -ENOMEM;
}
#include "dvb_frontend.h"
#include "dvb-bt8xx.h"
#include "bt878.h"
-#include "dvb-pll.h"
static int debug;
.demod_init = digitv_alps_tded4_demod_init,
};
-static int tdvs_tua6034_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
-{
- struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
- return lg_h06xf_pll_set(fe, card->i2c_adapter, params);
-}
-
static struct lgdt330x_config tdvs_tua6034_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
lgdt330x_reset(card);
card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config, card->i2c_adapter);
if (card->fe != NULL) {
- card->fe->ops.tuner_ops.set_params = tdvs_tua6034_tuner_set_params;
+ dvb_attach(lgh06xf_attach, card->fe, card->i2c_adapter);
dprintk ("dvb_bt8xx: lgdt330x detected\n");
}
break;
case BTTV_BOARD_TWINHAN_DST:
/* DST is not a frontend driver !!! */
- state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL);
+ state = kmalloc(sizeof (struct dst_state), GFP_KERNEL);
if (!state) {
printk("dvb_bt8xx: No memory\n");
break;
#include "cx24110.h"
#include "or51211.h"
#include "lgdt330x.h"
-#include "lg_h06xf.h"
+#include "lgh06xf.h"
#include "zl10353.h"
struct dvb_bt8xx_card {
dprintk(1, "rc_input_event=%d Up\n", cinergyt2->rc_input_event);
input_report_key(cinergyt2->rc_input_dev,
cinergyt2->rc_input_event, 0);
+ input_sync(cinergyt2->rc_input_dev);
cinergyt2->rc_input_event = KEY_MAX;
}
cinergyt2->rc_last_code = ~0;
dprintk(1, "rc_input_event=%d\n", cinergyt2->rc_input_event);
input_report_key(cinergyt2->rc_input_dev,
cinergyt2->rc_input_event, 1);
+ input_sync(cinergyt2->rc_input_dev);
cinergyt2->rc_last_code = rc_events[n].value;
}
}
{
struct input_dev *input_dev;
int i;
+ int err;
- cinergyt2->rc_input_dev = input_dev = input_allocate_device();
+ input_dev = input_allocate_device();
if (!input_dev)
return -ENOMEM;
input_dev->keycodesize = 0;
input_dev->keycodemax = 0;
- input_register_device(cinergyt2->rc_input_dev);
+ err = input_register_device(input_dev);
+ if (err) {
+ input_free_device(input_dev);
+ return err;
+ }
+
+ cinergyt2->rc_input_dev = input_dev;
schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
return 0;
config DVB_USB_DIB0700
tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
depends on DVB_USB
+ select DVB_DIB7000P
+ select DVB_DIB7000M
select DVB_DIB3000MC
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
depends on DVB_USB
select DVB_CX22702 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
help
help
Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
+config DVB_USB_TTUSB2
+ tristate "Pinnacle 400e DVB-S USB2.0 support"
+ depends on DVB_USB
+ select DVB_TDA10086 if !DVB_FE_CUSTOMISE
+ select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+ select DVB_TDA826X if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
+ firmware protocol used by this module is similar to the one used by the
+ old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+
config DVB_USB_DTT200U
tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
depends on DVB_USB
dvb-usb-cxusb-objs = cxusb.o
obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o
+dvb-usb-ttusb2-objs = ttusb2.o
+obj-$(CONFIG_DVB_USB_TTUSB2) += dvb-usb-ttusb2.o
+
dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o
obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
- .streaming_ctrl = dibusb2_0_streaming_ctrl,
- .pid_filter = dibusb_pid_filter,
- .pid_filter_ctrl = dibusb_pid_filter_ctrl,
-
- .frontend_attach = dibusb_dib3000mc_frontend_attach,
- .tuner_attach = dibusb_dib3000mc_tuner_attach,
-
- /* parameter for the MPEG2-data transfer */
- .stream = {
- .type = USB_BULK,
- .count = 7,
- .endpoint = 0x06,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .streaming_ctrl = dibusb2_0_streaming_ctrl,
+ .pid_filter = dibusb_pid_filter,
+ .pid_filter_ctrl = dibusb_pid_filter_ctrl,
+
+ .frontend_attach = dibusb_dib3000mc_frontend_attach,
+ .tuner_attach = dibusb_dib3000mc_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 7,
+ .endpoint = 0x06,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
.size_of_priv = sizeof(struct dibusb_state),
},
* TODO: Use the cx25840-driver for the analogue part
*
* Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de)
- * Copyright (C) 2005 Michael Krufky (mkrufky@m1k.net)
+ * Copyright (C) 2006 Michael Krufky (mkrufky@linuxtv.org)
* Copyright (C) 2006 Chris Pascoe (c.pascoe@itee.uq.edu.au)
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "cx22702.h"
#include "lgdt330x.h"
-#include "lg_h06xf.h"
+#include "lgh06xf.h"
#include "mt352.h"
#include "mt352_priv.h"
#include "zl10353.h"
/* debug */
int dvb_usb_cxusb_debug;
-module_param_named(debug,dvb_usb_cxusb_debug, int, 0644);
+module_param_named(debug, dvb_usb_cxusb_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
static int cxusb_ctrl_msg(struct dvb_usb_device *d,
- u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+ u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
{
int wo = (rbuf == NULL || rlen == 0); /* write-only */
u8 sndbuf[1+wlen];
- memset(sndbuf,0,1+wlen);
+ memset(sndbuf, 0, 1+wlen);
sndbuf[0] = cmd;
- memcpy(&sndbuf[1],wbuf,wlen);
+ memcpy(&sndbuf[1], wbuf, wlen);
if (wo)
- dvb_usb_generic_write(d,sndbuf,1+wlen);
+ dvb_usb_generic_write(d, sndbuf, 1+wlen);
else
- dvb_usb_generic_rw(d,sndbuf,1+wlen,rbuf,rlen,0);
+ dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0);
return 0;
}
static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff)
{
struct cxusb_state *st = d->priv;
- u8 o[2],i;
+ u8 o[2], i;
if (st->gpio_write_state[GPIO_TUNER] == onoff)
return;
o[0] = GPIO_TUNER;
o[1] = onoff;
- cxusb_ctrl_msg(d,CMD_GPIO_WRITE,o,2,&i,1);
+ cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1);
if (i != 0x01)
deb_info("gpio_write failed.\n");
}
/* I2C */
-static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
+static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i;
if (d->udev->descriptor.idVendor == USB_VID_MEDION)
switch (msg[i].addr) {
- case 0x63:
- cxusb_gpio_tuner(d,0);
- break;
- default:
- cxusb_gpio_tuner(d,1);
- break;
+ case 0x63:
+ cxusb_gpio_tuner(d, 0);
+ break;
+ default:
+ cxusb_gpio_tuner(d, 1);
+ break;
}
/* read request */
obuf[0] = msg[i].len;
obuf[1] = msg[i+1].len;
obuf[2] = msg[i].addr;
- memcpy(&obuf[3],msg[i].buf,msg[i].len);
+ memcpy(&obuf[3], msg[i].buf, msg[i].len);
if (cxusb_ctrl_msg(d, CMD_I2C_READ,
- obuf, 3+msg[i].len,
- ibuf, 1+msg[i+1].len) < 0)
+ obuf, 3+msg[i].len,
+ ibuf, 1+msg[i+1].len) < 0)
break;
if (ibuf[0] != 0x08)
deb_i2c("i2c read may have failed\n");
- memcpy(msg[i+1].buf,&ibuf[1],msg[i+1].len);
+ memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
i++;
} else { /* write */
u8 obuf[2+msg[i].len], ibuf;
obuf[0] = msg[i].addr;
obuf[1] = msg[i].len;
- memcpy(&obuf[2],msg[i].buf,msg[i].len);
+ memcpy(&obuf[2], msg[i].buf, msg[i].len);
- if (cxusb_ctrl_msg(d,CMD_I2C_WRITE, obuf, 2+msg[i].len, &ibuf,1) < 0)
+ if (cxusb_ctrl_msg(d, CMD_I2C_WRITE, obuf,
+ 2+msg[i].len, &ibuf,1) < 0)
break;
if (ibuf != 0x08)
deb_i2c("i2c write may have failed\n");
return 0;
}
-static int cxusb_lgh064f_tuner_set_params(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *fep)
-{
- struct dvb_usb_adapter *adap = fe->dvb->priv;
- return lg_h06xf_pll_set(fe, &adap->dev->i2c_adap, fep);
-}
-
static struct cx22702_config cxusb_cx22702_config = {
.demod_address = 0x63,
-
.output_mode = CX22702_PARALLEL_OUTPUT,
};
static int cxusb_dee1601_tuner_attach(struct dvb_usb_adapter *adap)
{
- adap->pll_addr = 0x61;
- adap->pll_desc = &dvb_pll_thomson_dtt7579;
- adap->fe->ops.tuner_ops.calc_regs = dvb_usb_tuner_calc_regs;
+ dvb_attach(dvb_pll_attach, adap->fe, 0x61,
+ NULL, &dvb_pll_thomson_dtt7579);
return 0;
}
static int cxusb_lgz201_tuner_attach(struct dvb_usb_adapter *adap)
{
- adap->pll_addr = 0x61;
- adap->pll_desc = &dvb_pll_lg_z201;
- adap->fe->ops.tuner_ops.calc_regs = dvb_usb_tuner_calc_regs;
+ dvb_attach(dvb_pll_attach, adap->fe, 0x61, NULL, &dvb_pll_lg_z201);
return 0;
}
static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap)
{
- adap->pll_addr = 0x60;
- adap->pll_desc = &dvb_pll_thomson_dtt7579;
- adap->fe->ops.tuner_ops.calc_regs = dvb_usb_tuner_calc_regs;
+ dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+ NULL, &dvb_pll_thomson_dtt7579);
return 0;
}
-static int cxusb_lgdt3303_tuner_attach(struct dvb_usb_adapter *adap)
+static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
{
- adap->fe->ops.tuner_ops.set_params = cxusb_lgh064f_tuner_set_params;
+ dvb_attach(lgh06xf_attach, adap->fe, &adap->dev->i2c_adap);
return 0;
}
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, &b, 1);
- if ((adap->fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config, &adap->dev->i2c_adap)) != NULL)
+ if ((adap->fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config,
+ &adap->dev->i2c_adap)) != NULL)
return 0;
return -EIO;
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
- if ((adap->fe = dvb_attach(lgdt330x_attach, &cxusb_lgdt3303_config, &adap->dev->i2c_adap)) != NULL)
+ if ((adap->fe = dvb_attach(lgdt330x_attach, &cxusb_lgdt3303_config,
+ &adap->dev->i2c_adap)) != NULL)
return 0;
return -EIO;
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
- if ((adap->fe = dvb_attach(mt352_attach, &cxusb_mt352_config, &adap->dev->i2c_adap)) != NULL)
+ if ((adap->fe = dvb_attach(mt352_attach, &cxusb_mt352_config,
+ &adap->dev->i2c_adap)) != NULL)
return 0;
return -EIO;
cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
- if (((adap->fe = dvb_attach(mt352_attach, &cxusb_dee1601_config, &adap->dev->i2c_adap)) != NULL) ||
- ((adap->fe = dvb_attach(zl10353_attach, &cxusb_zl10353_dee1601_config, &adap->dev->i2c_adap)) != NULL))
+ if (((adap->fe = dvb_attach(mt352_attach, &cxusb_dee1601_config,
+ &adap->dev->i2c_adap)) != NULL) ||
+ ((adap->fe = dvb_attach(zl10353_attach,
+ &cxusb_zl10353_dee1601_config,
+ &adap->dev->i2c_adap)) != NULL))
return 0;
return -EIO;
*/
#define BLUEBIRD_01_ID_OFFSET 6638
-static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, const struct firmware *fw)
+static int bluebird_patch_dvico_firmware_download(struct usb_device *udev,
+ const struct firmware *fw)
{
if (fw->size < BLUEBIRD_01_ID_OFFSET + 4)
return -EINVAL;
if (fw->data[BLUEBIRD_01_ID_OFFSET] == (USB_VID_DVICO & 0xff) &&
fw->data[BLUEBIRD_01_ID_OFFSET + 1] == USB_VID_DVICO >> 8) {
- fw->data[BLUEBIRD_01_ID_OFFSET + 2] = udev->descriptor.idProduct + 1;
- fw->data[BLUEBIRD_01_ID_OFFSET + 3] = udev->descriptor.idProduct >> 8;
+ fw->data[BLUEBIRD_01_ID_OFFSET + 2] =
+ udev->descriptor.idProduct + 1;
+ fw->data[BLUEBIRD_01_ID_OFFSET + 3] =
+ udev->descriptor.idProduct >> 8;
- return usb_cypress_load_firmware(udev,fw,CYPRESS_FX2);
+ return usb_cypress_load_firmware(udev, fw, CYPRESS_FX2);
}
return -EINVAL;
static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties;
static int cxusb_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
+ const struct usb_device_id *id)
{
if (dvb_usb_device_init(intf,&cxusb_medion_properties,THIS_MODULE,NULL) == 0 ||
dvb_usb_device_init(intf,&cxusb_bluebird_lgh064f_properties,THIS_MODULE,NULL) == 0 ||
}
static struct usb_device_id cxusb_table [] = {
- { USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) },
- { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) },
- {} /* Terminating entry */
+ { USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) },
+ { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) },
+ {} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, cxusb_table);
.num_adapters = 1,
.adapter = {
{
- .streaming_ctrl = cxusb_streaming_ctrl,
- .frontend_attach = cxusb_cx22702_frontend_attach,
- .tuner_attach = cxusb_fmd1216me_tuner_attach,
- /* parameter for the MPEG2-data transfer */
- .stream = {
- .type = USB_BULK,
- .count = 5,
- .endpoint = 0x02,
- .u = {
- .bulk = {
- .buffersize = 8192,
- }
- }
- },
+ .streaming_ctrl = cxusb_streaming_ctrl,
+ .frontend_attach = cxusb_cx22702_frontend_attach,
+ .tuner_attach = cxusb_fmd1216me_tuner_attach,
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 8192,
+ }
+ }
+ },
},
},
.num_adapters = 1,
.adapter = {
{
- .streaming_ctrl = cxusb_streaming_ctrl,
- .frontend_attach = cxusb_lgdt3303_frontend_attach,
- .tuner_attach = cxusb_lgdt3303_tuner_attach,
-
- /* parameter for the MPEG2-data transfer */
- .stream = {
- .type = USB_BULK,
- .count = 5,
- .endpoint = 0x02,
- .u = {
- .bulk = {
- .buffersize = 8192,
- }
- }
- },
+ .streaming_ctrl = cxusb_streaming_ctrl,
+ .frontend_attach = cxusb_lgdt3303_frontend_attach,
+ .tuner_attach = cxusb_lgh064f_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 8192,
+ }
+ }
+ },
},
},
.num_adapters = 1,
.adapter = {
{
- .streaming_ctrl = cxusb_streaming_ctrl,
- .frontend_attach = cxusb_dee1601_frontend_attach,
- .tuner_attach = cxusb_dee1601_tuner_attach,
- /* parameter for the MPEG2-data transfer */
+ .streaming_ctrl = cxusb_streaming_ctrl,
+ .frontend_attach = cxusb_dee1601_frontend_attach,
+ .tuner_attach = cxusb_dee1601_tuner_attach,
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 5,
- .endpoint = 0x04,
- .u = {
- .bulk = {
- .buffersize = 8192,
- }
- }
- },
+ .count = 5,
+ .endpoint = 0x04,
+ .u = {
+ .bulk = {
+ .buffersize = 8192,
+ }
+ }
+ },
},
},
.num_adapters = 2,
.adapter = {
{
- .streaming_ctrl = cxusb_streaming_ctrl,
- .frontend_attach = cxusb_mt352_frontend_attach,
- .tuner_attach = cxusb_lgz201_tuner_attach,
+ .streaming_ctrl = cxusb_streaming_ctrl,
+ .frontend_attach = cxusb_mt352_frontend_attach,
+ .tuner_attach = cxusb_lgz201_tuner_attach,
- /* parameter for the MPEG2-data transfer */
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 5,
- .endpoint = 0x04,
- .u = {
- .bulk = {
- .buffersize = 8192,
- }
- }
- },
+ .count = 5,
+ .endpoint = 0x04,
+ .u = {
+ .bulk = {
+ .buffersize = 8192,
+ }
+ }
+ },
},
},
.power_ctrl = cxusb_bluebird_power_ctrl,
.num_adapters = 1,
.adapter = {
{
- .streaming_ctrl = cxusb_streaming_ctrl,
- .frontend_attach = cxusb_mt352_frontend_attach,
- .tuner_attach = cxusb_dtt7579_tuner_attach,
+ .streaming_ctrl = cxusb_streaming_ctrl,
+ .frontend_attach = cxusb_mt352_frontend_attach,
+ .tuner_attach = cxusb_dtt7579_tuner_attach,
- /* parameter for the MPEG2-data transfer */
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 5,
- .endpoint = 0x04,
- .u = {
- .bulk = {
- .buffersize = 8192,
- }
- }
- },
+ .count = 5,
+ .endpoint = 0x04,
+ .u = {
+ .bulk = {
+ .buffersize = 8192,
+ }
+ }
+ },
},
},
.power_ctrl = cxusb_bluebird_power_ctrl,
static struct usb_driver cxusb_driver = {
.name = "dvb_usb_cxusb",
.probe = cxusb_probe,
- .disconnect = dvb_usb_device_exit,
+ .disconnect = dvb_usb_device_exit,
.id_table = cxusb_table,
};
module_exit (cxusb_module_exit);
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_AUTHOR("Michael Krufky <mkrufky@m1k.net>");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design");
MODULE_VERSION("1.0-alpha");
#define REQUEST_I2C_WRITE 0x3
#define REQUEST_POLL_RC 0x4
#define REQUEST_JUMPRAM 0x8
+#define REQUEST_SET_CLOCK 0xB
#define REQUEST_SET_GPIO 0xC
#define REQUEST_ENABLE_VIDEO 0xF
// 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog)
// 2 Byte: MPEG2 mode: 4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
// 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines) 4LSB( " " )
+#define REQUEST_GET_VERSION 0x15
struct dib0700_state {
u8 channel_state;
u16 mt2060_if1[2];
+
+ u8 is_dib7000pc;
};
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
+extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
extern struct i2c_algorithm dib0700_i2c_algo;
int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc, int *cold)
{
- u8 buf[3] = { REQUEST_SET_GPIO, 4, (GPIO_IN << 7) | (0 << 6) }; // GPIO4 is save - used for I2C
- *cold = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
- buf[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, buf, 3, USB_CTRL_GET_TIMEOUT) != 3;
+ u8 b[16];
+ s16 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev,0),
+ REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT);
+
+ deb_info("FW GET_VERSION length: %d\n",ret);
+
+ *cold = ret <= 0;
deb_info("cold: %d\n", *cold);
return 0;
}
+static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll,
+ u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv,
+ u16 pll_loopdiv, u16 free_div, u16 dsuScaler)
+{
+ u8 b[10];
+ b[0] = REQUEST_SET_CLOCK;
+ b[1] = (en_pll << 7) | (pll_src << 6) | (pll_range << 5) | (clock_gpio3 << 4);
+ b[2] = (pll_prediv >> 8) & 0xff; // MSB
+ b[3] = pll_prediv & 0xff; // LSB
+ b[4] = (pll_loopdiv >> 8) & 0xff; // MSB
+ b[5] = pll_loopdiv & 0xff; // LSB
+ b[6] = (free_div >> 8) & 0xff; // MSB
+ b[7] = free_div & 0xff; // LSB
+ b[8] = (dsuScaler >> 8) & 0xff; // MSB
+ b[9] = dsuScaler & 0xff; // LSB
+
+ return dib0700_ctrl_wr(d, b, 10);
+}
+
+int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3)
+{
+ switch (clk_MHz) {
+ case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break;
+ default: return -EINVAL;
+ }
+ return 0;
+}
+
static int dib0700_jumpram(struct usb_device *udev, u32 address)
{
int ret, actlen;
/* start the firmware */
if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) {
info("firmware started successfully.");
- msleep(100);
+ msleep(500);
}
} else
ret = -EIO;
#include "dib0700.h"
#include "dib3000mc.h"
+#include "dib7000m.h"
+#include "dib7000p.h"
#include "mt2060.h"
static int force_lna_activation;
}
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
-/*
-static struct mt2060_config stk7000p_mt2060_config = {
- 0x60
+static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
+ BAND_UHF | BAND_VHF, // band_caps
+
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
+
+ 712, // inv_gain
+ 41, // time_stabiliz
+
+ 0, // alpha_level
+ 118, // thlock
+
+ 0, // wbd_inv
+ 4095, // wbd_ref
+ 0, // wbd_sel
+ 0, // wbd_alpha
+
+ 42598, // agc1_max
+ 17694, // agc1_min
+ 45875, // agc2_max
+ 2621, // agc2_min
+ 0, // agc1_pt1
+ 76, // agc1_pt2
+ 139, // agc1_pt3
+ 52, // agc1_slope1
+ 59, // agc1_slope2
+ 107, // agc2_pt1
+ 172, // agc2_pt2
+ 57, // agc2_slope1
+ 70, // agc2_slope2
+
+ 21, // alpha_mant
+ 25, // alpha_exp
+ 28, // beta_mant
+ 48, // beta_exp
+
+ 1, // perform_agc_softsplit
+ { 0, // split_min
+ 107, // split_max
+ 51800, // global_split_min
+ 24700 // global_split_max
+ },
+};
+
+static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
+ BAND_UHF | BAND_VHF,
+
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
+
+ 712, // inv_gain
+ 41, // time_stabiliz
+
+ 0, // alpha_level
+ 118, // thlock
+
+ 0, // wbd_inv
+ 4095, // wbd_ref
+ 0, // wbd_sel
+ 0, // wbd_alpha
+
+ 42598, // agc1_max
+ 16384, // agc1_min
+ 42598, // agc2_max
+ 0, // agc2_min
+
+ 0, // agc1_pt1
+ 137, // agc1_pt2
+ 255, // agc1_pt3
+
+ 0, // agc1_slope1
+ 255, // agc1_slope2
+
+ 0, // agc2_pt1
+ 0, // agc2_pt2
+
+ 0, // agc2_slope1
+ 41, // agc2_slope2
+
+ 15, // alpha_mant
+ 25, // alpha_exp
+
+ 28, // beta_mant
+ 48, // beta_exp
+
+ 0, // perform_agc_softsplit
+};
+
+static struct dibx000_bandwidth_config stk7700p_pll_config = {
+ 60000, 30000, // internal, sampling
+ 1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
+ 0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
+ (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
+ 60258167, // ifreq
+ 20452225, // timf
+};
+
+static struct dib7000m_config stk7700p_dib7000m_config = {
+ .dvbt_mode = 1,
+ .output_mpeg2_in_188_bytes = 1,
+ .quartz_direct = 1,
+
+ .agc_config_count = 1,
+ .agc = &stk7700p_7000m_mt2060_agc_config,
+ .bw = &stk7700p_pll_config,
+
+ .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+static struct dib7000p_config stk7700p_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc = &stk7700p_7000p_mt2060_agc_config,
+ .bw = &stk7700p_pll_config,
+
+ .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
};
-*/
static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
{
+ struct dib0700_state *st = adap->dev->priv;
/* unless there is no real power management in DVB - we leave the device on GPIO6 */
- dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
- dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
- dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
+
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
+
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ st->mt2060_if1[0] = 1220;
+
+ if (dib7000pc_detection(&adap->dev->i2c_adap)) {
+ adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
+ st->is_dib7000pc = 1;
+ } else
+ adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
-// adap->fe = dib7000m_attach(&adap->dev->i2c_adap, &stk7700p_dib7000m_config, 18);
- return 0;
+ return adap->fe == NULL ? -ENODEV : 0;
}
+static struct mt2060_config stk7700p_mt2060_config = {
+ 0x60
+};
+
static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
{
-// tun_i2c = dib7000m_get_tuner_i2c_master(adap->fe, 1);
-// return mt2060_attach(adap->fe, tun_i2c, &stk3000p_mt2060_config, if1);
- return 0;
+ struct dib0700_state *st = adap->dev->priv;
+ struct i2c_adapter *tun_i2c;
+
+ if (st->is_dib7000pc)
+ tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ else
+ tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+ return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config,
+ st->mt2060_if1[0]) == NULL ? -ENODEV : 0;
}
struct usb_device_id dib0700_usb_id_table[] = {
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
+ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
+
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
+ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
+ { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
+ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
+ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
},
},
- .num_device_descs = 3,
+ .num_device_descs = 6,
.devices = {
{ "DiBcom STK7700P reference design",
- { &dib0700_usb_id_table[0], NULL },
+ { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
{ NULL },
},
{ "Hauppauge Nova-T Stick",
- { &dib0700_usb_id_table[3], NULL },
+ { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
{ NULL },
},
{ "AVerMedia AVerTV DVB-T Volar",
- { &dib0700_usb_id_table[4], NULL },
+ { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
{ NULL },
},
+ { "Compro Videomate U500",
+ { &dib0700_usb_id_table[6], NULL },
+ { NULL },
+ },
+ { "Uniwill STK7700P based (Hama and others)",
+ { &dib0700_usb_id_table[7], NULL },
+ { NULL },
+ },
+ { "Leadtek Winfast DTV Dongle (STK7700P based)",
+ { &dib0700_usb_id_table[8], NULL },
+ { NULL },
+ }
}
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_device_descs = 1,
.devices = {
{ "Hauppauge Nova-T 500 Dual DVB-T",
- { &dib0700_usb_id_table[1], &dib0700_usb_id_table[2], NULL },
+ { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
{ NULL },
},
}
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 16,
- .streaming_ctrl = dibusb_streaming_ctrl,
- .pid_filter = dibusb_pid_filter,
- .pid_filter_ctrl = dibusb_pid_filter_ctrl,
- .frontend_attach = dibusb_dib3000mb_frontend_attach,
- .tuner_attach = dibusb_tuner_probe_and_attach,
+ .streaming_ctrl = dibusb_streaming_ctrl,
+ .pid_filter = dibusb_pid_filter,
+ .pid_filter_ctrl = dibusb_pid_filter_ctrl,
+ .frontend_attach = dibusb_dib3000mb_frontend_attach,
+ .tuner_attach = dibusb_tuner_probe_and_attach,
- /* parameter for the MPEG2-data transfer */
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 7,
- .endpoint = 0x02,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .count = 7,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
.size_of_priv = sizeof(struct dibusb_state),
}
},
.caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER,
.pid_filter_count = 16,
- .streaming_ctrl = dibusb_streaming_ctrl,
- .pid_filter = dibusb_pid_filter,
- .pid_filter_ctrl = dibusb_pid_filter_ctrl,
- .frontend_attach = dibusb_dib3000mb_frontend_attach,
- .tuner_attach = dibusb_tuner_probe_and_attach,
+ .streaming_ctrl = dibusb_streaming_ctrl,
+ .pid_filter = dibusb_pid_filter,
+ .pid_filter_ctrl = dibusb_pid_filter_ctrl,
+ .frontend_attach = dibusb_dib3000mb_frontend_attach,
+ .tuner_attach = dibusb_tuner_probe_and_attach,
- /* parameter for the MPEG2-data transfer */
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 7,
- .endpoint = 0x02,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .count = 7,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
.size_of_priv = sizeof(struct dibusb_state),
},
},
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 16,
- .streaming_ctrl = dibusb2_0_streaming_ctrl,
- .pid_filter = dibusb_pid_filter,
- .pid_filter_ctrl = dibusb_pid_filter_ctrl,
- .frontend_attach = dibusb_dib3000mb_frontend_attach,
- .tuner_attach = dibusb_thomson_tuner_attach,
- /* parameter for the MPEG2-data transfer */
+ .streaming_ctrl = dibusb2_0_streaming_ctrl,
+ .pid_filter = dibusb_pid_filter,
+ .pid_filter_ctrl = dibusb_pid_filter_ctrl,
+ .frontend_attach = dibusb_dib3000mb_frontend_attach,
+ .tuner_attach = dibusb_thomson_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 7,
- .endpoint = 0x06,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .count = 7,
+ .endpoint = 0x06,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
.size_of_priv = sizeof(struct dibusb_state),
}
},
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 16,
- .streaming_ctrl = dibusb2_0_streaming_ctrl,
- .pid_filter = dibusb_pid_filter,
- .pid_filter_ctrl = dibusb_pid_filter_ctrl,
- .frontend_attach = dibusb_dib3000mb_frontend_attach,
- .tuner_attach = dibusb_tuner_probe_and_attach,
- /* parameter for the MPEG2-data transfer */
+ .streaming_ctrl = dibusb2_0_streaming_ctrl,
+ .pid_filter = dibusb_pid_filter,
+ .pid_filter_ctrl = dibusb_pid_filter_ctrl,
+ .frontend_attach = dibusb_dib3000mb_frontend_attach,
+ .tuner_attach = dibusb_tuner_probe_and_attach,
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 7,
- .endpoint = 0x06,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .count = 7,
+ .endpoint = 0x06,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
.size_of_priv = sizeof(struct dibusb_state),
}
},
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
- .streaming_ctrl = dibusb2_0_streaming_ctrl,
- .pid_filter = dibusb_pid_filter,
- .pid_filter_ctrl = dibusb_pid_filter_ctrl,
- .frontend_attach = dibusb_dib3000mc_frontend_attach,
- .tuner_attach = dibusb_dib3000mc_tuner_attach,
+ .streaming_ctrl = dibusb2_0_streaming_ctrl,
+ .pid_filter = dibusb_pid_filter,
+ .pid_filter_ctrl = dibusb_pid_filter_ctrl,
+ .frontend_attach = dibusb_dib3000mc_frontend_attach,
+ .tuner_attach = dibusb_dib3000mc_tuner_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 7,
- .endpoint = 0x06,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .count = 7,
+ .endpoint = 0x06,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
.size_of_priv = sizeof(struct dibusb_state),
}
},
.num_adapters = 1,
.adapter = {
{
- .frontend_attach = digitv_frontend_attach,
- .tuner_attach = digitv_tuner_attach,
+ .frontend_attach = digitv_frontend_attach,
+ .tuner_attach = digitv_tuner_attach,
- /* parameter for the MPEG2-data transfer */
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 7,
- .endpoint = 0x02,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .count = 7,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
}
},
.identify_state = digitv_identify_state,
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
.pid_filter_count = 15,
- .streaming_ctrl = dtt200u_streaming_ctrl,
- .pid_filter = dtt200u_pid_filter,
- .frontend_attach = dtt200u_frontend_attach,
- /* parameter for the MPEG2-data transfer */
+ .streaming_ctrl = dtt200u_streaming_ctrl,
+ .pid_filter = dtt200u_pid_filter,
+ .frontend_attach = dtt200u_frontend_attach,
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 7,
- .endpoint = 0x02,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .count = 7,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
}
},
.power_ctrl = dtt200u_power_ctrl,
#define USB_VID_VISIONPLUS 0x13d3
#define USB_VID_TWINHAN 0x1822
#define USB_VID_ULTIMA_ELECTRONIC 0x05d8
+#define USB_VID_UNIWILL 0x1584
#define USB_VID_WIDEVIEW 0x14aa
/* Product IDs */
#define USB_PID_COMPRO_DVBU2000_WARM 0xd001
#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c
#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d
+#define USB_PID_COMPRO_VIDEOMATE_U500 0x1e78
#define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064
#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065
#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8
#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6
#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7
#define USB_PID_DIBCOM_STK7700P 0x1e14
+#define USB_PID_DIBCOM_STK7700P_PC 0x1e78
#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
+#define USB_PID_UNIWILL_STK7700P 0x6003
#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0
#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1
#define USB_PID_KWORLD_VSTREAM_COLD 0x17de
#define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941
#define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950
#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050
-#define USB_PID_AVERMEDIA_VOLAR 0x1234
+#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060
+#define USB_PID_AVERMEDIA_VOLAR 0xa807
+#define USB_PID_AVERMEDIA_VOLAR_2 0xb808
#define USB_PID_NEBULA_DIGITV 0x0201
#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820
#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500
#define USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM 0xdb51
#define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD 0xdb58
#define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM 0xdb59
-#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD 0xdb54
-#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM 0xdb55
+#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD 0xdb54
+#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM 0xdb55
#define USB_PID_MEDION_MD95700 0x0932
#define USB_PID_KYE_DVB_T_COLD 0x701e
#define USB_PID_KYE_DVB_T_WARM 0x701f
#define USB_PID_GRANDTEC_DVBT_USB2_WARM 0x0bc7
#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025
#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026
+#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00
#define USB_PID_GENPIX_8PSK_COLD 0x0200
#define USB_PID_GENPIX_8PSK_WARM 0x0201
+
#endif
int dvb_usb_remote_init(struct dvb_usb_device *d)
{
+ struct input_dev *input_dev;
int i;
+ int err;
if (d->props.rc_key_map == NULL ||
d->props.rc_query == NULL ||
usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
- d->rc_input_dev = input_allocate_device();
- if (!d->rc_input_dev)
+ input_dev = input_allocate_device();
+ if (!input_dev)
return -ENOMEM;
- d->rc_input_dev->evbit[0] = BIT(EV_KEY);
- d->rc_input_dev->keycodesize = sizeof(unsigned char);
- d->rc_input_dev->keycodemax = KEY_MAX;
- d->rc_input_dev->name = "IR-receiver inside an USB DVB receiver";
- d->rc_input_dev->phys = d->rc_phys;
- usb_to_input_id(d->udev, &d->rc_input_dev->id);
- d->rc_input_dev->cdev.dev = &d->udev->dev;
+ input_dev->evbit[0] = BIT(EV_KEY);
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = KEY_MAX;
+ input_dev->name = "IR-receiver inside an USB DVB receiver";
+ input_dev->phys = d->rc_phys;
+ usb_to_input_id(d->udev, &input_dev->id);
+ input_dev->cdev.dev = &d->udev->dev;
/* set the bits for the keys */
deb_rc("key map size: %d\n", d->props.rc_key_map_size);
for (i = 0; i < d->props.rc_key_map_size; i++) {
- deb_rc("setting bit for event %d item %d\n",d->props.rc_key_map[i].event, i);
- set_bit(d->props.rc_key_map[i].event, d->rc_input_dev->keybit);
+ deb_rc("setting bit for event %d item %d\n",
+ d->props.rc_key_map[i].event, i);
+ set_bit(d->props.rc_key_map[i].event, input_dev->keybit);
}
/* Start the remote-control polling. */
d->props.rc_interval = 100; /* default */
/* setting these two values to non-zero, we have to manage key repeats */
- d->rc_input_dev->rep[REP_PERIOD] = d->props.rc_interval;
- d->rc_input_dev->rep[REP_DELAY] = d->props.rc_interval + 150;
+ input_dev->rep[REP_PERIOD] = d->props.rc_interval;
+ input_dev->rep[REP_DELAY] = d->props.rc_interval + 150;
- input_register_device(d->rc_input_dev);
+ err = input_register_device(input_dev);
+ if (err) {
+ input_free_device(input_dev);
+ return err;
+ }
+
+ d->rc_input_dev = input_dev;
INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
.num_adapters = 1,
.adapter = {
{
- .streaming_ctrl = gp8psk_streaming_ctrl,
- .frontend_attach = gp8psk_frontend_attach,
- /* parameter for the MPEG2-data transfer */
+ .streaming_ctrl = gp8psk_streaming_ctrl,
+ .frontend_attach = gp8psk_frontend_attach,
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 7,
- .endpoint = 0x82,
- .u = {
- .bulk = {
- .buffersize = 8192,
- }
- }
- },
+ .count = 7,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 8192,
+ }
+ }
+ },
}
},
.power_ctrl = gp8psk_power_ctrl,
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
- .streaming_ctrl = dibusb2_0_streaming_ctrl,
- .pid_filter = dibusb_pid_filter,
- .pid_filter_ctrl = dibusb_pid_filter_ctrl,
- .frontend_attach = dibusb_dib3000mc_frontend_attach,
- .tuner_attach = dibusb_dib3000mc_tuner_attach,
-
- /* parameter for the MPEG2-data transfer */
- .stream = {
- .type = USB_BULK,
- .count = 7,
- .endpoint = 0x06,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .streaming_ctrl = dibusb2_0_streaming_ctrl,
+ .pid_filter = dibusb_pid_filter,
+ .pid_filter_ctrl = dibusb_pid_filter_ctrl,
+ .frontend_attach = dibusb_dib3000mc_frontend_attach,
+ .tuner_attach = dibusb_dib3000mc_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 7,
+ .endpoint = 0x06,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
.size_of_priv = sizeof(struct dibusb_state),
}
--- /dev/null
+/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
+ * (e.g. Pinnacle 400e DVB-S USB2.0).
+ *
+ * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes.
+ *
+ * TDA8263 + TDA10086
+ *
+ * I2C addresses:
+ * 0x08 - LNBP21PD - LNB power supply
+ * 0x0e - TDA10086 - Demodulator
+ * 0x50 - FX2 eeprom
+ * 0x60 - TDA8263 - Tuner
+ * 0x78 ???
+ *
+ * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
+ * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
+ * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#define DVB_USB_LOG_PREFIX "ttusb2"
+#include "dvb-usb.h"
+
+#include "ttusb2.h"
+
+#include "tda826x.h"
+#include "tda10086.h"
+#include "lnbp21.h"
+
+/* debug */
+static int dvb_usb_ttusb2_debug;
+#define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args)
+module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS);
+
+struct ttusb2_state {
+ u8 id;
+};
+
+static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
+ u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ struct ttusb2_state *st = d->priv;
+ u8 s[wlen+4],r[64] = { 0 };
+ int ret = 0;
+
+ memset(s,0,wlen+4);
+
+ s[0] = 0xaa;
+ s[1] = ++st->id;
+ s[2] = cmd;
+ s[3] = wlen;
+ memcpy(&s[4],wbuf,wlen);
+
+ ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0);
+
+ if (ret != 0 ||
+ r[0] != 0x55 ||
+ r[1] != s[1] ||
+ r[2] != cmd ||
+ (rlen > 0 && r[3] != rlen)) {
+ warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]);
+ return -EIO;
+ }
+
+ if (rlen > 0)
+ memcpy(rbuf, &r[4], rlen);
+
+ return 0;
+}
+
+static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ static u8 obuf[60], ibuf[60];
+ int i,read;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ if (num > 2)
+ warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+
+ for (i = 0; i < num; i++) {
+ read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+
+ obuf[0] = (msg[i].addr << 1) | read;
+ obuf[1] = msg[i].len;
+
+ /* read request */
+ if (read)
+ obuf[2] = msg[i+1].len;
+ else
+ obuf[2] = 0;
+
+ memcpy(&obuf[3],msg[i].buf,msg[i].len);
+
+ if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) {
+ err("i2c transfer failed.");
+ break;
+ }
+
+ if (read) {
+ memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len);
+ i++;
+ }
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return i;
+}
+
+static u32 ttusb2_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ttusb2_i2c_algo = {
+ .master_xfer = ttusb2_i2c_xfer,
+ .functionality = ttusb2_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static int ttusb2_identify_state (struct usb_device *udev, struct
+ dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
+ int *cold)
+{
+ *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
+ return 0;
+}
+
+static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ u8 b = onoff;
+ ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0);
+ return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0);
+}
+
+
+static struct tda10086_config tda10086_config = {
+ .demod_address = 0x0e,
+ .invert = 0,
+};
+
+static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ if (usb_set_interface(adap->dev->udev,0,3) < 0)
+ err("set interface to alts=3 failed");
+
+ if ((adap->fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
+ deb_info("TDA10086 attach failed\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
+ deb_info("TDA8263 attach failed\n");
+ return -ENODEV;
+ }
+
+ if (dvb_attach(lnbp21_attach, adap->fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
+ deb_info("LNBP21 attach failed\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties ttusb2_properties;
+
+static int ttusb2_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return dvb_usb_device_init(intf,&ttusb2_properties,THIS_MODULE,NULL);
+}
+
+static struct usb_device_id ttusb2_table [] = {
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) },
+ {} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE (usb, ttusb2_table);
+
+static struct dvb_usb_device_properties ttusb2_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = CYPRESS_FX2,
+ .firmware = "dvb-usb-pctv-400e-01.fw",
+
+ .size_of_priv = sizeof(struct ttusb2_state),
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = NULL, // ttusb2_streaming_ctrl,
+
+ .frontend_attach = ttusb2_frontend_attach,
+ .tuner_attach = ttusb2_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_ISOC,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .isoc = {
+ .framesperurb = 4,
+ .framesize = 940,
+ .interval = 1,
+ }
+ }
+ }
+ }
+ },
+
+ .power_ctrl = ttusb2_power_ctrl,
+ .identify_state = ttusb2_identify_state,
+
+ .i2c_algo = &ttusb2_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .num_device_descs = 1,
+ .devices = {
+ { "Pinnacle 400e DVB-S USB2.0",
+ { &ttusb2_table[0], NULL },
+ { NULL },
+ },
+ }
+};
+
+static struct usb_driver ttusb2_driver = {
+ .name = "dvb_usb_ttusb2",
+ .probe = ttusb2_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = ttusb2_table,
+};
+
+/* module stuff */
+static int __init ttusb2_module_init(void)
+{
+ int result;
+ if ((result = usb_register(&ttusb2_driver))) {
+ err("usb_register failed. Error number %d",result);
+ return result;
+ }
+
+ return 0;
+}
+
+static void __exit ttusb2_module_exit(void)
+{
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&ttusb2_driver);
+}
+
+module_init (ttusb2_module_init);
+module_exit (ttusb2_module_exit);
+
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
+ * (e.g. Pinnacle 400e DVB-S USB2.0).
+ *
+ * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
+ * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
+ * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_TTUSB2_H_
+#define _DVB_USB_TTUSB2_H_
+
+/* TTUSB protocol
+ *
+ * always to messages (out/in)
+ * out message:
+ * 0xaa <id> <cmdbyte> <datalen> <data...>
+ *
+ * in message (complete block is always 0x40 bytes long)
+ * 0x55 <id> <cmdbyte> <datalen> <data...>
+ *
+ * id is incremented for each transaction
+ */
+
+#define CMD_DSP_DOWNLOAD 0x13
+/* out data: <byte>[28]
+ * last block must be empty */
+
+#define CMD_DSP_BOOT 0x14
+/* out data: nothing */
+
+#define CMD_POWER 0x15
+/* out data: <on=1/off=0> */
+
+#define CMD_LNB 0x16
+/* out data: <power=1> <18V=0,13V=1> <tone> <??=1> <??=1> */
+
+#define CMD_GET_VERSION 0x17
+/* in data: <version_byte>[5] */
+
+#define CMD_DISEQC 0x18
+/* out data: <master=0xff/burst=??> <cmdlen> <cmdbytes>[cmdlen] */
+
+#define CMD_PID_ENABLE 0x22
+/* out data: <index> <type: ts=1/sec=2> <pid msb> <pid lsb> */
+
+#define CMD_PID_DISABLE 0x23
+/* out data: <index> */
+
+#define CMD_FILTER_ENABLE 0x24
+/* out data: <index> <pid_idx> <filter>[12] <mask>[12] */
+
+#define CMD_FILTER_DISABLE 0x25
+/* out data: <index> */
+
+#define CMD_GET_DSP_VERSION 0x26
+/* in data: <version_byte>[28] */
+
+#define CMD_I2C_XFER 0x31
+/* out data: <addr << 1> <sndlen> <rcvlen> <data>[sndlen]
+ * in data: <addr << 1> <sndlen> <rcvlen> <data>[rcvlen] */
+
+#define CMD_I2C_BITRATE 0x32
+/* out data: <default=0> */
+
+#endif
.num_adapters = 1,
.adapter = {
{
- .streaming_ctrl = dibusb2_0_streaming_ctrl,
- .frontend_attach = umt_mt352_frontend_attach,
- .tuner_attach = umt_tuner_attach,
+ .streaming_ctrl = dibusb2_0_streaming_ctrl,
+ .frontend_attach = umt_mt352_frontend_attach,
+ .tuner_attach = umt_tuner_attach,
- /* parameter for the MPEG2-data transfer */
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 20,
- .endpoint = 0x06,
- .u = {
- .bulk = {
- .buffersize = 512,
- }
- }
- },
+ .count = 20,
+ .endpoint = 0x06,
+ .u = {
+ .bulk = {
+ .buffersize = 512,
+ }
+ }
+ },
.size_of_priv = sizeof(struct dibusb_state),
}
.caps = DVB_USB_ADAP_RECEIVES_204_BYTE_TS,
.streaming_ctrl = vp702x_streaming_ctrl,
- .frontend_attach = vp702x_frontend_attach,
+ .frontend_attach = vp702x_frontend_attach,
- /* parameter for the MPEG2-data transfer */
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
.count = 10,
- .endpoint = 0x02,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
.size_of_priv = sizeof(struct vp702x_state),
}
- },
+ },
.read_mac_address = vp702x_read_mac_addr,
.rc_key_map = vp702x_rc_keys,
{ 0x00, 0x00, KEY_TAB }, /* Tab */
{ 0x00, 0x48, KEY_INFO }, /* Preview */
{ 0x00, 0x04, KEY_LIST }, /* RecordList */
- { 0x00, 0x0f, KEY_TEXT } /* Teletext */
+ { 0x00, 0x0f, KEY_TEXT }, /* Teletext */
+ { 0x00, 0x41, KEY_PREVIOUSSONG },
+ { 0x00, 0x42, KEY_NEXTSONG },
+ { 0x00, 0x4b, KEY_UP },
+ { 0x00, 0x51, KEY_DOWN },
+ { 0x00, 0x4e, KEY_LEFT },
+ { 0x00, 0x52, KEY_RIGHT },
+ { 0x00, 0x4f, KEY_ENTER },
+ { 0x00, 0x13, KEY_CANCEL },
+ { 0x00, 0x4a, KEY_CLEAR },
+ { 0x00, 0x54, KEY_PRINT }, /* Capture */
+ { 0x00, 0x43, KEY_SUBTITLE }, /* Subtitle/CC */
+ { 0x00, 0x08, KEY_VIDEO }, /* A/V */
+ { 0x00, 0x07, KEY_SLEEP }, /* Hibernate */
+ { 0x00, 0x45, KEY_ZOOM }, /* Zoom+ */
+ { 0x00, 0x18, KEY_RED},
+ { 0x00, 0x53, KEY_GREEN},
+ { 0x00, 0x5e, KEY_YELLOW},
+ { 0x00, 0x5f, KEY_BLUE}
};
static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
.num_adapters = 1,
.adapter = {
{
- .frontend_attach = vp7045_frontend_attach,
- /* parameter for the MPEG2-data transfer */
+ .frontend_attach = vp7045_frontend_attach,
+ /* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
- .count = 7,
- .endpoint = 0x02,
- .u = {
- .bulk = {
- .buffersize = 4096,
- }
- }
- },
+ .count = 7,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
}
},
.power_ctrl = vp7045_power_ctrl,
A DVB-T tuner module. Designed for mobile usage. Say Y when you want
to support this frontend.
+config DVB_DIB7000M
+ tristate "DiBcom 7000MA/MB/PA/PB/MC"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+ to support this frontend.
+
+config DVB_DIB7000P
+ tristate "DiBcom 7000PC"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+ to support this frontend.
+
comment "DVB-C (cable) frontends"
depends on DVB_CORE
help
A driver for the silicon IF tuner MT2060 from Microtune.
+config DVB_TUNER_LGH06XF
+ tristate "LG TDVS-H06xF ATSC tuner"
+ depends on DVB_CORE && I2C
+ select DVB_PLL
+ default m if DVB_FE_CUSTOMISE
+ help
+ A driver for the LG TDVS-H06xF ATSC tuner family.
+
comment "Miscellaneous devices"
depends on DVB_CORE
obj-$(CONFIG_DVB_L64781) += l64781.o
obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o
obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o
+obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o
+obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o
obj-$(CONFIG_DVB_MT312) += mt312.o
obj-$(CONFIG_DVB_VES1820) += ves1820.o
obj-$(CONFIG_DVB_VES1X93) += ves1x93.o
obj-$(CONFIG_DVB_TDA826X) += tda826x.o
obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
obj-$(CONFIG_DVB_TUA6100) += tua6100.o
+obj-$(CONFIG_DVB_TUNER_LGH06XF) += lgh06xf.o
/* a channel for autosearch */
- reg = 0;
- if (chan->nfft == -1 && chan->guard == -1) reg = 7;
- if (chan->nfft == -1 && chan->guard != -1) reg = 2;
- if (chan->nfft != -1 && chan->guard == -1) reg = 3;
-
fchan.nfft = 1; fchan.guard = 0; fchan.nqam = 2;
fchan.vit_alpha = 1; fchan.vit_code_rate_hp = 2; fchan.vit_code_rate_lp = 2;
fchan.vit_hrch = 0; fchan.vit_select_hp = 1;
- dib3000mc_set_channel_cfg(state, &fchan, reg);
+ dib3000mc_set_channel_cfg(state, &fchan, 7);
reg = dib3000mc_read_word(state, 0);
dib3000mc_write_word(state, 0, reg | (1 << 8));
--- /dev/null
+/*
+ * Linux-DVB Driver for DiBcom's DiB7000M and
+ * first generation DiB7000P-demodulator-family.
+ *
+ * Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "dib7000m.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000M:"); printk(args); } } while (0)
+
+struct dib7000m_state {
+ struct dvb_frontend demod;
+ struct dib7000m_config cfg;
+
+ u8 i2c_addr;
+ struct i2c_adapter *i2c_adap;
+
+ struct dibx000_i2c_master i2c_master;
+
+/* offset is 1 in case of the 7000MC */
+ u8 reg_offs;
+
+ u16 wbd_ref;
+
+ u8 current_band;
+ fe_bandwidth_t current_bandwidth;
+ struct dibx000_agc_config *current_agc;
+ u32 timf;
+
+ u16 revision;
+};
+
+enum dib7000m_power_mode {
+ DIB7000M_POWER_ALL = 0,
+
+ DIB7000M_POWER_NO,
+ DIB7000M_POWER_INTERF_ANALOG_AGC,
+ DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD,
+ DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD,
+ DIB7000M_POWER_INTERFACE_ONLY,
+};
+
+static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg)
+{
+ u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff };
+ u8 rb[2];
+ struct i2c_msg msg[2] = {
+ { .addr = state->i2c_addr >> 1, .flags = 0, .buf = wb, .len = 2 },
+ { .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
+ };
+
+ if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
+ dprintk("i2c read error on %d\n",reg);
+
+ return (rb[0] << 8) | rb[1];
+}
+
+static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val)
+{
+ u8 b[4] = {
+ (reg >> 8) & 0xff, reg & 0xff,
+ (val >> 8) & 0xff, val & 0xff,
+ };
+ struct i2c_msg msg = {
+ .addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
+ };
+ return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+}
+static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
+{
+ int ret = 0;
+ u16 outreg, fifo_threshold, smo_mode,
+ sram = 0x0005; /* by default SRAM output is disabled */
+
+ outreg = 0;
+ fifo_threshold = 1792;
+ smo_mode = (dib7000m_read_word(state, 294 + state->reg_offs) & 0x0010) | (1 << 1);
+
+ dprintk("-I- Setting output mode for demod %p to %d\n",
+ &state->demod, mode);
+
+ switch (mode) {
+ case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock
+ outreg = (1 << 10); /* 0x0400 */
+ break;
+ case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock
+ outreg = (1 << 10) | (1 << 6); /* 0x0440 */
+ break;
+ case OUTMODE_MPEG2_SERIAL: // STBs with serial input
+ outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */
+ break;
+ case OUTMODE_DIVERSITY:
+ if (state->cfg.hostbus_diversity)
+ outreg = (1 << 10) | (4 << 6); /* 0x0500 */
+ else
+ sram |= 0x0c00;
+ break;
+ case OUTMODE_MPEG2_FIFO: // e.g. USB feeding
+ smo_mode |= (3 << 1);
+ fifo_threshold = 512;
+ outreg = (1 << 10) | (5 << 6);
+ break;
+ case OUTMODE_HIGH_Z: // disable
+ outreg = 0;
+ break;
+ default:
+ dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
+ break;
+ }
+
+ if (state->cfg.output_mpeg2_in_188_bytes)
+ smo_mode |= (1 << 5) ;
+
+ ret |= dib7000m_write_word(state, 294 + state->reg_offs, smo_mode);
+ ret |= dib7000m_write_word(state, 295 + state->reg_offs, fifo_threshold); /* synchronous fread */
+ ret |= dib7000m_write_word(state, 1795, outreg);
+ ret |= dib7000m_write_word(state, 1805, sram);
+
+ return ret;
+}
+
+static int dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_power_mode mode)
+{
+ /* by default everything is going to be powered off */
+ u16 reg_903 = 0xffff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906 = 0x3fff;
+
+ /* now, depending on the requested mode, we power on */
+ switch (mode) {
+ /* power up everything in the demod */
+ case DIB7000M_POWER_ALL:
+ reg_903 = 0x0000; reg_904 = 0x0000; reg_905 = 0x0000; reg_906 = 0x0000;
+ break;
+
+ /* just leave power on the control-interfaces: GPIO and (I2C or SDIO or SRAM) */
+ case DIB7000M_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C or SRAM */
+ reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2));
+ break;
+
+ case DIB7000M_POWER_INTERF_ANALOG_AGC:
+ reg_903 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10));
+ reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4) | (1 << 2));
+ reg_906 &= ~((1 << 0));
+ break;
+
+ case DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD:
+ reg_903 = 0x0000; reg_904 = 0x801f; reg_905 = 0x0000; reg_906 = 0x0000;
+ break;
+
+ case DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD:
+ reg_903 = 0x0000; reg_904 = 0x8000; reg_905 = 0x010b; reg_906 = 0x0000;
+ break;
+ case DIB7000M_POWER_NO:
+ break;
+ }
+
+ /* always power down unused parts */
+ if (!state->cfg.mobile_mode)
+ reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1);
+
+ /* P_sdio_select_clk = 0 on MC */
+ if (state->revision != 0x4000)
+ reg_906 <<= 1;
+
+ dib7000m_write_word(state, 903, reg_903);
+ dib7000m_write_word(state, 904, reg_904);
+ dib7000m_write_word(state, 905, reg_905);
+ dib7000m_write_word(state, 906, reg_906);
+
+ return 0;
+}
+
+static int dib7000m_set_adc_state(struct dib7000m_state *state, enum dibx000_adc_states no)
+{
+ int ret = 0;
+ u16 reg_913 = dib7000m_read_word(state, 913),
+ reg_914 = dib7000m_read_word(state, 914);
+
+ switch (no) {
+ case DIBX000_SLOW_ADC_ON:
+ reg_914 |= (1 << 1) | (1 << 0);
+ ret |= dib7000m_write_word(state, 914, reg_914);
+ reg_914 &= ~(1 << 1);
+ break;
+
+ case DIBX000_SLOW_ADC_OFF:
+ reg_914 |= (1 << 1) | (1 << 0);
+ break;
+
+ case DIBX000_ADC_ON:
+ if (state->revision == 0x4000) { // workaround for PA/MA
+ // power-up ADC
+ dib7000m_write_word(state, 913, 0);
+ dib7000m_write_word(state, 914, reg_914 & 0x3);
+ // power-down bandgag
+ dib7000m_write_word(state, 913, (1 << 15));
+ dib7000m_write_word(state, 914, reg_914 & 0x3);
+ }
+
+ reg_913 &= 0x0fff;
+ reg_914 &= 0x0003;
+ break;
+
+ case DIBX000_ADC_OFF: // leave the VBG voltage on
+ reg_913 |= (1 << 14) | (1 << 13) | (1 << 12);
+ reg_914 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
+ break;
+
+ case DIBX000_VBG_ENABLE:
+ reg_913 &= ~(1 << 15);
+ break;
+
+ case DIBX000_VBG_DISABLE:
+ reg_913 |= (1 << 15);
+ break;
+
+ default:
+ break;
+ }
+
+// dprintk("-D- 913: %x, 914: %x\n", reg_913, reg_914);
+
+ ret |= dib7000m_write_word(state, 913, reg_913);
+ ret |= dib7000m_write_word(state, 914, reg_914);
+
+ return ret;
+}
+
+static int dib7000m_set_bandwidth(struct dvb_frontend *demod, u8 bw_idx)
+{
+ struct dib7000m_state *state = demod->demodulator_priv;
+ u32 timf;
+
+ // store the current bandwidth for later use
+ state->current_bandwidth = bw_idx;
+
+ if (state->timf == 0) {
+ dprintk("-D- Using default timf\n");
+ timf = state->cfg.bw->timf;
+ } else {
+ dprintk("-D- Using updated timf\n");
+ timf = state->timf;
+ }
+
+ timf = timf * (BW_INDEX_TO_KHZ(bw_idx) / 100) / 80;
+
+ dib7000m_write_word(state, 23, (timf >> 16) & 0xffff);
+ dib7000m_write_word(state, 24, (timf ) & 0xffff);
+
+ return 0;
+}
+
+static int dib7000m_sad_calib(struct dib7000m_state *state)
+{
+
+/* internal */
+// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+ dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
+ dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
+
+ /* do the calibration */
+ dib7000m_write_word(state, 929, (1 << 0));
+ dib7000m_write_word(state, 929, (0 << 0));
+
+ msleep(1);
+
+ return 0;
+}
+
+static void dib7000m_reset_pll_common(struct dib7000m_state *state, const struct dibx000_bandwidth_config *bw)
+{
+ dib7000m_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff);
+ dib7000m_write_word(state, 19, (bw->internal*1000) & 0xffff);
+ dib7000m_write_word(state, 21, (bw->ifreq >> 16) & 0xffff);
+ dib7000m_write_word(state, 22, bw->ifreq & 0xffff);
+
+ dib7000m_write_word(state, 928, bw->sad_cfg);
+}
+
+static void dib7000m_reset_pll(struct dib7000m_state *state)
+{
+ const struct dibx000_bandwidth_config *bw = state->cfg.bw;
+ u16 reg_907,reg_910;
+
+ /* default */
+ reg_907 = (bw->pll_bypass << 15) | (bw->modulo << 7) |
+ (bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) |
+ (bw->enable_refdiv << 1) | (0 << 0);
+ reg_910 = (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset;
+
+ // for this oscillator frequency should be 30 MHz for the Master (default values in the board_parameters give that value)
+ // this is only working only for 30 MHz crystals
+ if (!state->cfg.quartz_direct) {
+ reg_910 |= (1 << 5); // forcing the predivider to 1
+
+ // if the previous front-end is baseband, its output frequency is 15 MHz (prev freq divided by 2)
+ if(state->cfg.input_clk_is_div_2)
+ reg_907 |= (16 << 9);
+ else // otherwise the previous front-end puts out its input (default 30MHz) - no extra division necessary
+ reg_907 |= (8 << 9);
+ } else {
+ reg_907 |= (bw->pll_ratio & 0x3f) << 9;
+ reg_910 |= (bw->pll_prediv << 5);
+ }
+
+ dib7000m_write_word(state, 910, reg_910); // pll cfg
+ dib7000m_write_word(state, 907, reg_907); // clk cfg0
+ dib7000m_write_word(state, 908, 0x0006); // clk_cfg1
+
+ dib7000m_reset_pll_common(state, bw);
+}
+
+static void dib7000mc_reset_pll(struct dib7000m_state *state)
+{
+ const struct dibx000_bandwidth_config *bw = state->cfg.bw;
+
+ // clk_cfg0
+ dib7000m_write_word(state, 907, (bw->pll_prediv << 8) | (bw->pll_ratio << 0));
+
+ // clk_cfg1
+ //dib7000m_write_word(state, 908, (1 << 14) | (3 << 12) |(0 << 11) |
+ dib7000m_write_word(state, 908, (0 << 14) | (3 << 12) |(0 << 11) |
+ (bw->IO_CLK_en_core << 10) | (bw->bypclk_div << 5) | (bw->enable_refdiv << 4) |
+ (bw->pll_bypass << 3) | (bw->pll_range << 1) | (bw->pll_reset << 0));
+
+ // smpl_cfg
+ dib7000m_write_word(state, 910, (1 << 12) | (2 << 10) | (bw->modulo << 8) | (bw->ADClkSrc << 7));
+
+ dib7000m_reset_pll_common(state, bw);
+}
+
+static int dib7000m_reset_gpio(struct dib7000m_state *st)
+{
+ /* reset the GPIOs */
+ dprintk("-D- gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",
+ st->cfg.gpio_dir, st->cfg.gpio_val,st->cfg.gpio_pwm_pos);
+
+ dib7000m_write_word(st, 773, st->cfg.gpio_dir);
+ dib7000m_write_word(st, 774, st->cfg.gpio_val);
+
+ /* TODO 782 is P_gpio_od */
+
+ dib7000m_write_word(st, 775, st->cfg.gpio_pwm_pos);
+
+ dib7000m_write_word(st, 780, st->cfg.pwm_freq_div);
+ return 0;
+}
+
+static int dib7000m_demod_reset(struct dib7000m_state *state)
+{
+ dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
+
+ /* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
+ dib7000m_set_adc_state(state, DIBX000_VBG_ENABLE);
+
+ /* restart all parts */
+ dib7000m_write_word(state, 898, 0xffff);
+ dib7000m_write_word(state, 899, 0xffff);
+ dib7000m_write_word(state, 900, 0xff0f);
+ dib7000m_write_word(state, 901, 0xfffc);
+
+ dib7000m_write_word(state, 898, 0);
+ dib7000m_write_word(state, 899, 0);
+ dib7000m_write_word(state, 900, 0);
+ dib7000m_write_word(state, 901, 0);
+
+ if (state->revision == 0x4000)
+ dib7000m_reset_pll(state);
+ else
+ dib7000mc_reset_pll(state);
+
+ if (dib7000m_reset_gpio(state) != 0)
+ dprintk("-E- GPIO reset was not successful.\n");
+
+ if (dib7000m_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
+ dprintk("-E- OUTPUT_MODE could not be resetted.\n");
+
+ /* unforce divstr regardless whether i2c enumeration was done or not */
+ dib7000m_write_word(state, 1794, dib7000m_read_word(state, 1794) & ~(1 << 1) );
+
+ dib7000m_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
+
+ dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON);
+ dib7000m_sad_calib(state);
+ dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
+
+ dib7000m_set_power_mode(state, DIB7000M_POWER_INTERFACE_ONLY);
+
+ return 0;
+}
+
+static void dib7000m_restart_agc(struct dib7000m_state *state)
+{
+ // P_restart_iqc & P_restart_agc
+ dib7000m_write_word(state, 898, 0x0c00);
+ dib7000m_write_word(state, 898, 0x0000);
+}
+
+static int dib7000m_agc_soft_split(struct dib7000m_state *state)
+{
+ u16 agc,split_offset;
+
+ if(!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
+ return 0;
+
+ // n_agc_global
+ agc = dib7000m_read_word(state, 390);
+
+ if (agc > state->current_agc->split.min_thres)
+ split_offset = state->current_agc->split.min;
+ else if (agc < state->current_agc->split.max_thres)
+ split_offset = state->current_agc->split.max;
+ else
+ split_offset = state->current_agc->split.max *
+ (agc - state->current_agc->split.min_thres) /
+ (state->current_agc->split.max_thres - state->current_agc->split.min_thres);
+
+ dprintk("AGC split_offset: %d\n",split_offset);
+
+ // P_agc_force_split and P_agc_split_offset
+ return dib7000m_write_word(state, 103, (dib7000m_read_word(state, 103) & 0xff00) | split_offset);
+}
+
+static int dib7000m_update_lna(struct dib7000m_state *state)
+{
+ int i;
+ u16 dyn_gain;
+
+ // when there is no LNA to program return immediatly
+ if (state->cfg.update_lna == NULL)
+ return 0;
+
+ msleep(60);
+ for (i = 0; i < 20; i++) {
+ // read dyn_gain here (because it is demod-dependent and not tuner)
+ dyn_gain = dib7000m_read_word(state, 390);
+
+ dprintk("agc global: %d\n", dyn_gain);
+
+ if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
+ dib7000m_restart_agc(state);
+ msleep(60);
+ } else
+ break;
+ }
+ return 0;
+}
+
+static void dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
+{
+ struct dibx000_agc_config *agc = NULL;
+ int i;
+ if (state->current_band == band)
+ return;
+ state->current_band = band;
+
+ for (i = 0; i < state->cfg.agc_config_count; i++)
+ if (state->cfg.agc[i].band_caps & band) {
+ agc = &state->cfg.agc[i];
+ break;
+ }
+
+ if (agc == NULL) {
+ dprintk("-E- No valid AGC configuration found for band 0x%02x\n",band);
+ return;
+ }
+
+ state->current_agc = agc;
+
+ /* AGC */
+ dib7000m_write_word(state, 72 , agc->setup);
+ dib7000m_write_word(state, 73 , agc->inv_gain);
+ dib7000m_write_word(state, 74 , agc->time_stabiliz);
+ dib7000m_write_word(state, 97 , (agc->alpha_level << 12) | agc->thlock);
+
+ // Demod AGC loop configuration
+ dib7000m_write_word(state, 98, (agc->alpha_mant << 5) | agc->alpha_exp);
+ dib7000m_write_word(state, 99, (agc->beta_mant << 6) | agc->beta_exp);
+
+ dprintk("-D- WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
+ state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
+
+ /* AGC continued */
+ if (state->wbd_ref != 0)
+ dib7000m_write_word(state, 102, state->wbd_ref);
+ else // use default
+ dib7000m_write_word(state, 102, agc->wbd_ref);
+
+ dib7000m_write_word(state, 103, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
+ dib7000m_write_word(state, 104, agc->agc1_max);
+ dib7000m_write_word(state, 105, agc->agc1_min);
+ dib7000m_write_word(state, 106, agc->agc2_max);
+ dib7000m_write_word(state, 107, agc->agc2_min);
+ dib7000m_write_word(state, 108, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
+ dib7000m_write_word(state, 109, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+ dib7000m_write_word(state, 110, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+ dib7000m_write_word(state, 111, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+
+ if (state->revision > 0x4000) { // settings for the MC
+ dib7000m_write_word(state, 71, agc->agc1_pt3);
+// dprintk("-D- 929: %x %d %d\n",
+// (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2), agc->wbd_inv, agc->wbd_sel);
+ dib7000m_write_word(state, 929, (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2));
+ } else {
+ // wrong default values
+ u16 b[9] = { 676, 696, 717, 737, 758, 778, 799, 819, 840 };
+ for (i = 0; i < 9; i++)
+ dib7000m_write_word(state, 88 + i, b[i]);
+ }
+}
+
+static void dib7000m_update_timf_freq(struct dib7000m_state *state)
+{
+ u32 timf = (dib7000m_read_word(state, 436) << 16) | dib7000m_read_word(state, 437);
+ state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100);
+ dib7000m_write_word(state, 23, (u16) (timf >> 16));
+ dib7000m_write_word(state, 24, (u16) (timf & 0xffff));
+ dprintk("-D- Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf);
+}
+
+static void dib7000m_set_channel(struct dib7000m_state *state, struct dibx000_ofdm_channel *ch, u8 seq)
+{
+ u16 value, est[4];
+
+ dib7000m_set_agc_config(state, BAND_OF_FREQUENCY(ch->RF_kHz));
+
+ /* nfft, guard, qam, alpha */
+ dib7000m_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha));
+ dib7000m_write_word(state, 5, (seq << 4));
+
+ /* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */
+ value = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1);
+ if (ch->vit_hrch == 0 || ch->vit_select_hp == 1)
+ value |= (ch->vit_code_rate_hp << 1);
+ else
+ value |= (ch->vit_code_rate_lp << 1);
+ dib7000m_write_word(state, 267 + state->reg_offs, value);
+
+ /* offset loop parameters */
+
+ /* P_timf_alpha = 6, P_corm_alpha=6, P_corm_thres=0x80 */
+ dib7000m_write_word(state, 26, (6 << 12) | (6 << 8) | 0x80);
+
+ /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=1, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
+ dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (1 << 9) | (3 << 5) | (1 << 4) | (0x3));
+
+ /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max=3 */
+ dib7000m_write_word(state, 32, (0 << 4) | 0x3);
+
+ /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step=5 */
+ dib7000m_write_word(state, 33, (0 << 4) | 0x5);
+
+ /* P_dvsy_sync_wait */
+ switch (ch->nfft) {
+ case 1: value = 256; break;
+ case 2: value = 128; break;
+ case 0:
+ default: value = 64; break;
+ }
+ value *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin
+ value <<= 4;
+
+ /* deactive the possibility of diversity reception if extended interleave - not for 7000MC */
+ /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
+ if (ch->intlv_native || state->revision > 0x4000)
+ value |= (1 << 2) | (2 << 0);
+ else
+ value |= 0;
+ dib7000m_write_word(state, 266 + state->reg_offs, value);
+
+ /* channel estimation fine configuration */
+ switch (ch->nqam) {
+ case 2:
+ est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */
+ est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */
+ est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
+ est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */
+ break;
+ case 1:
+ est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */
+ est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */
+ est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
+ est[3] = 0xfff0; /* P_adp_noise_ext -0.002 */
+ break;
+ default:
+ est[0] = 0x099a; /* P_adp_regul_cnt 0.3 */
+ est[1] = 0xffae; /* P_adp_noise_cnt -0.01 */
+ est[2] = 0x0333; /* P_adp_regul_ext 0.1 */
+ est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */
+ break;
+ }
+ for (value = 0; value < 4; value++)
+ dib7000m_write_word(state, 214 + value + state->reg_offs, est[value]);
+
+ // set power-up level: interf+analog+AGC
+ dib7000m_set_power_mode(state, DIB7000M_POWER_INTERF_ANALOG_AGC);
+ dib7000m_set_adc_state(state, DIBX000_ADC_ON);
+
+ msleep(7);
+
+ //AGC initialization
+ if (state->cfg.agc_control)
+ state->cfg.agc_control(&state->demod, 1);
+
+ dib7000m_restart_agc(state);
+
+ // wait AGC rough lock time
+ msleep(5);
+
+ dib7000m_update_lna(state);
+ dib7000m_agc_soft_split(state);
+
+ // wait AGC accurate lock time
+ msleep(7);
+
+ if (state->cfg.agc_control)
+ state->cfg.agc_control(&state->demod, 0);
+
+ // set power-up level: autosearch
+ dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD);
+}
+
+static int dib7000m_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+ struct dib7000m_state *state = demod->demodulator_priv;
+ struct dibx000_ofdm_channel auto_ch;
+ int ret = 0;
+ u32 value;
+
+ INIT_OFDM_CHANNEL(&auto_ch);
+ auto_ch.RF_kHz = ch->RF_kHz;
+ auto_ch.Bw = ch->Bw;
+ auto_ch.nqam = 2;
+ auto_ch.guard = 0;
+ auto_ch.nfft = 1;
+ auto_ch.vit_alpha = 1;
+ auto_ch.vit_select_hp = 1;
+ auto_ch.vit_code_rate_hp = 2;
+ auto_ch.vit_code_rate_lp = 3;
+ auto_ch.vit_hrch = 0;
+ auto_ch.intlv_native = 1;
+
+ dib7000m_set_channel(state, &auto_ch, 7);
+
+ // always use the setting for 8MHz here lock_time for 7,6 MHz are longer
+ value = 30 * state->cfg.bw->internal;
+ ret |= dib7000m_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); // lock0 wait time
+ ret |= dib7000m_write_word(state, 7, (u16) (value & 0xffff)); // lock0 wait time
+ value = 100 * state->cfg.bw->internal;
+ ret |= dib7000m_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); // lock1 wait time
+ ret |= dib7000m_write_word(state, 9, (u16) (value & 0xffff)); // lock1 wait time
+ value = 500 * state->cfg.bw->internal;
+ ret |= dib7000m_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
+ ret |= dib7000m_write_word(state, 11, (u16) (value & 0xffff)); // lock2 wait time
+
+ // start search
+ value = dib7000m_read_word(state, 0);
+ ret |= dib7000m_write_word(state, 0, value | (1 << 9));
+
+ /* clear n_irq_pending */
+ if (state->revision == 0x4000)
+ dib7000m_write_word(state, 1793, 0);
+ else
+ dib7000m_read_word(state, 537);
+
+ ret |= dib7000m_write_word(state, 0, (u16) value);
+
+ return ret;
+}
+
+static int dib7000m_autosearch_irq(struct dib7000m_state *state, u16 reg)
+{
+ u16 irq_pending = dib7000m_read_word(state, reg);
+
+ if (irq_pending & 0x1) { // failed
+ dprintk("#\n");
+ return 1;
+ }
+
+ if (irq_pending & 0x2) { // succeeded
+ dprintk("!\n");
+ return 2;
+ }
+ return 0; // still pending
+}
+
+static int dib7000m_autosearch_is_irq(struct dvb_frontend *demod)
+{
+ struct dib7000m_state *state = demod->demodulator_priv;
+ if (state->revision == 0x4000)
+ return dib7000m_autosearch_irq(state, 1793);
+ else
+ return dib7000m_autosearch_irq(state, 537);
+}
+
+static int dib7000m_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+ struct dib7000m_state *state = demod->demodulator_priv;
+ int ret = 0;
+ u16 value;
+
+ // we are already tuned - just resuming from suspend
+ if (ch != NULL)
+ dib7000m_set_channel(state, ch, 0);
+ else
+ return -EINVAL;
+
+ // restart demod
+ ret |= dib7000m_write_word(state, 898, 0x4000);
+ ret |= dib7000m_write_word(state, 898, 0x0000);
+ msleep(45);
+
+ ret |= dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD);
+ /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
+ ret |= dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
+
+ // never achieved a lock with that bandwidth so far - wait for timfreq to update
+ if (state->timf == 0)
+ msleep(200);
+
+ //dump_reg(state);
+ /* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
+ value = (6 << 8) | 0x80;
+ switch (ch->nfft) {
+ case 0: value |= (7 << 12); break;
+ case 1: value |= (9 << 12); break;
+ case 2: value |= (8 << 12); break;
+ }
+ ret |= dib7000m_write_word(state, 26, value);
+
+ /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
+ value = (0 << 4);
+ switch (ch->nfft) {
+ case 0: value |= 0x6; break;
+ case 1: value |= 0x8; break;
+ case 2: value |= 0x7; break;
+ }
+ ret |= dib7000m_write_word(state, 32, value);
+
+ /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
+ value = (0 << 4);
+ switch (ch->nfft) {
+ case 0: value |= 0x6; break;
+ case 1: value |= 0x8; break;
+ case 2: value |= 0x7; break;
+ }
+ ret |= dib7000m_write_word(state, 33, value);
+
+ // we achieved a lock - it's time to update the osc freq
+ if ((dib7000m_read_word(state, 535) >> 6) & 0x1)
+ dib7000m_update_timf_freq(state);
+
+ return ret;
+}
+
+static int dib7000m_init(struct dvb_frontend *demod)
+{
+ struct dib7000m_state *state = demod->demodulator_priv;
+ int ret = 0;
+ u8 o = state->reg_offs;
+
+ dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
+
+ if (dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
+ dprintk("-E- could not start Slow ADC\n");
+
+ if (state->cfg.dvbt_mode)
+ dib7000m_write_word(state, 1796, 0x0); // select DVB-T output
+
+ if (state->cfg.mobile_mode)
+ ret |= dib7000m_write_word(state, 261 + o, 2);
+ else
+ ret |= dib7000m_write_word(state, 224 + o, 1);
+
+ ret |= dib7000m_write_word(state, 173 + o, 0);
+ ret |= dib7000m_write_word(state, 174 + o, 0);
+ ret |= dib7000m_write_word(state, 175 + o, 0);
+ ret |= dib7000m_write_word(state, 176 + o, 0);
+ ret |= dib7000m_write_word(state, 177 + o, 0);
+ ret |= dib7000m_write_word(state, 178 + o, 0);
+ ret |= dib7000m_write_word(state, 179 + o, 0);
+ ret |= dib7000m_write_word(state, 180 + o, 0);
+
+ // P_corm_thres Lock algorithms configuration
+ ret |= dib7000m_write_word(state, 26, 0x6680);
+
+ // P_palf_alpha_regul, P_palf_filter_freeze, P_palf_filter_on
+ ret |= dib7000m_write_word(state, 170 + o, 0x0410);
+ // P_fft_nb_to_cut
+ ret |= dib7000m_write_word(state, 182 + o, 8192);
+ // P_pha3_thres
+ ret |= dib7000m_write_word(state, 195 + o, 0x0ccd);
+ // P_cti_use_cpe, P_cti_use_prog
+ ret |= dib7000m_write_word(state, 196 + o, 0);
+ // P_cspu_regul, P_cspu_win_cut
+ ret |= dib7000m_write_word(state, 205 + o, 0x200f);
+ // P_adp_regul_cnt
+ ret |= dib7000m_write_word(state, 214 + o, 0x023d);
+ // P_adp_noise_cnt
+ ret |= dib7000m_write_word(state, 215 + o, 0x00a4);
+ // P_adp_regul_ext
+ ret |= dib7000m_write_word(state, 216 + o, 0x00a4);
+ // P_adp_noise_ext
+ ret |= dib7000m_write_word(state, 217 + o, 0x7ff0);
+ // P_adp_fil
+ ret |= dib7000m_write_word(state, 218 + o, 0x3ccc);
+
+ // P_2d_byp_ti_num
+ ret |= dib7000m_write_word(state, 226 + o, 0);
+
+ // P_fec_*
+ ret |= dib7000m_write_word(state, 281 + o, 0x0010);
+ // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+ ret |= dib7000m_write_word(state, 294 + o,0x0062);
+
+ // P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
+ if(state->cfg.tuner_is_baseband)
+ ret |= dib7000m_write_word(state, 36, 0x0755);
+ else
+ ret |= dib7000m_write_word(state, 36, 0x1f55);
+
+ // auto search configuration
+ ret |= dib7000m_write_word(state, 2, 0x0004);
+ ret |= dib7000m_write_word(state, 3, 0x1000);
+ ret |= dib7000m_write_word(state, 4, 0x0814);
+ ret |= dib7000m_write_word(state, 6, 0x001b);
+ ret |= dib7000m_write_word(state, 7, 0x7740);
+ ret |= dib7000m_write_word(state, 8, 0x005b);
+ ret |= dib7000m_write_word(state, 9, 0x8d80);
+ ret |= dib7000m_write_word(state, 10, 0x01c9);
+ ret |= dib7000m_write_word(state, 11, 0xc380);
+ ret |= dib7000m_write_word(state, 12, 0x0000);
+ ret |= dib7000m_write_word(state, 13, 0x0080);
+ ret |= dib7000m_write_word(state, 14, 0x0000);
+ ret |= dib7000m_write_word(state, 15, 0x0090);
+ ret |= dib7000m_write_word(state, 16, 0x0001);
+ ret |= dib7000m_write_word(state, 17, 0xd4c0);
+ ret |= dib7000m_write_word(state, 263 + o,0x0001);
+
+ // P_divclksel=3 P_divbitsel=1
+ if (state->revision == 0x4000)
+ dib7000m_write_word(state, 909, (3 << 10) | (1 << 6));
+ else
+ dib7000m_write_word(state, 909, (3 << 4) | 1);
+
+ // Tuner IO bank: max drive (14mA)
+ ret |= dib7000m_write_word(state, 912 ,0x2c8a);
+
+ ret |= dib7000m_write_word(state, 1817, 1);
+
+ return ret;
+}
+
+static int dib7000m_sleep(struct dvb_frontend *demod)
+{
+ struct dib7000m_state *st = demod->demodulator_priv;
+ dib7000m_set_output_mode(st, OUTMODE_HIGH_Z);
+ return dib7000m_set_power_mode(st, DIB7000M_POWER_INTERFACE_ONLY) |
+ dib7000m_set_adc_state(st, DIBX000_SLOW_ADC_OFF) |
+ dib7000m_set_adc_state(st, DIBX000_ADC_OFF);
+}
+
+static int dib7000m_identify(struct dib7000m_state *state)
+{
+ u16 value;
+ if ((value = dib7000m_read_word(state, 896)) != 0x01b3) {
+ dprintk("-E- DiB7000M: wrong Vendor ID (read=0x%x)\n",value);
+ return -EREMOTEIO;
+ }
+
+ state->revision = dib7000m_read_word(state, 897);
+ if (state->revision != 0x4000 &&
+ state->revision != 0x4001 &&
+ state->revision != 0x4002) {
+ dprintk("-E- DiB7000M: wrong Device ID (%x)\n",value);
+ return -EREMOTEIO;
+ }
+
+ /* protect this driver to be used with 7000PC */
+ if (state->revision == 0x4000 && dib7000m_read_word(state, 769) == 0x4000) {
+ dprintk("-E- DiB7000M: this driver does not work with DiB7000PC\n");
+ return -EREMOTEIO;
+ }
+
+ switch (state->revision) {
+ case 0x4000: dprintk("-I- found DiB7000MA/PA/MB/PB\n"); break;
+ case 0x4001: state->reg_offs = 1; dprintk("-I- found DiB7000HC\n"); break;
+ case 0x4002: state->reg_offs = 1; dprintk("-I- found DiB7000MC\n"); break;
+ }
+
+ return 0;
+}
+
+
+static int dib7000m_get_frontend(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct dib7000m_state *state = fe->demodulator_priv;
+ u16 tps = dib7000m_read_word(state,480);
+
+ fep->inversion = INVERSION_AUTO;
+
+ fep->u.ofdm.bandwidth = state->current_bandwidth;
+
+ switch ((tps >> 8) & 0x3) {
+ case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break;
+ case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break;
+ /* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */
+ }
+
+ switch (tps & 0x3) {
+ case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break;
+ case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break;
+ case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break;
+ case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break;
+ }
+
+ switch ((tps >> 14) & 0x3) {
+ case 0: fep->u.ofdm.constellation = QPSK; break;
+ case 1: fep->u.ofdm.constellation = QAM_16; break;
+ case 2:
+ default: fep->u.ofdm.constellation = QAM_64; break;
+ }
+
+ /* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
+ /* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */
+
+ fep->u.ofdm.hierarchy_information = HIERARCHY_NONE;
+ switch ((tps >> 5) & 0x7) {
+ case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break;
+ case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break;
+ case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break;
+ case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break;
+ case 7:
+ default: fep->u.ofdm.code_rate_HP = FEC_7_8; break;
+
+ }
+
+ switch ((tps >> 2) & 0x7) {
+ case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break;
+ case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break;
+ case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break;
+ case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break;
+ case 7:
+ default: fep->u.ofdm.code_rate_LP = FEC_7_8; break;
+ }
+
+ /* native interleaver: (dib7000m_read_word(state, 481) >> 5) & 0x1 */
+
+ return 0;
+}
+
+static int dib7000m_set_frontend(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct dib7000m_state *state = fe->demodulator_priv;
+ struct dibx000_ofdm_channel ch;
+
+ INIT_OFDM_CHANNEL(&ch);
+ FEP2DIB(fep,&ch);
+
+ state->current_bandwidth = fep->u.ofdm.bandwidth;
+ dib7000m_set_bandwidth(fe, fep->u.ofdm.bandwidth);
+
+ if (fe->ops.tuner_ops.set_params)
+ fe->ops.tuner_ops.set_params(fe, fep);
+
+ if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
+ fep->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ||
+ fep->u.ofdm.constellation == QAM_AUTO ||
+ fep->u.ofdm.code_rate_HP == FEC_AUTO) {
+ int i = 800, found;
+
+ dib7000m_autosearch_start(fe, &ch);
+ do {
+ msleep(1);
+ found = dib7000m_autosearch_is_irq(fe);
+ } while (found == 0 && i--);
+
+ dprintk("autosearch returns: %d\n",found);
+ if (found == 0 || found == 1)
+ return 0; // no channel found
+
+ dib7000m_get_frontend(fe, fep);
+ FEP2DIB(fep, &ch);
+ }
+
+ /* make this a config parameter */
+ dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO);
+
+ return dib7000m_tune(fe, &ch);
+}
+
+static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat)
+{
+ struct dib7000m_state *state = fe->demodulator_priv;
+ u16 lock = dib7000m_read_word(state, 535);
+
+ *stat = 0;
+
+ if (lock & 0x8000)
+ *stat |= FE_HAS_SIGNAL;
+ if (lock & 0x3000)
+ *stat |= FE_HAS_CARRIER;
+ if (lock & 0x0100)
+ *stat |= FE_HAS_VITERBI;
+ if (lock & 0x0010)
+ *stat |= FE_HAS_SYNC;
+ if (lock & 0x0008)
+ *stat |= FE_HAS_LOCK;
+
+ return 0;
+}
+
+static int dib7000m_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct dib7000m_state *state = fe->demodulator_priv;
+ *ber = (dib7000m_read_word(state, 526) << 16) | dib7000m_read_word(state, 527);
+ return 0;
+}
+
+static int dib7000m_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
+{
+ struct dib7000m_state *state = fe->demodulator_priv;
+ *unc = dib7000m_read_word(state, 534);
+ return 0;
+}
+
+static int dib7000m_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct dib7000m_state *state = fe->demodulator_priv;
+ u16 val = dib7000m_read_word(state, 390);
+ *strength = 65535 - val;
+ return 0;
+}
+
+static int dib7000m_read_snr(struct dvb_frontend* fe, u16 *snr)
+{
+ *snr = 0x0000;
+ return 0;
+}
+
+static int dib7000m_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+ tune->min_delay_ms = 1000;
+ return 0;
+}
+
+static void dib7000m_release(struct dvb_frontend *demod)
+{
+ struct dib7000m_state *st = demod->demodulator_priv;
+ dibx000_exit_i2c_master(&st->i2c_master);
+ kfree(st);
+}
+
+struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
+{
+ struct dib7000m_state *st = demod->demodulator_priv;
+ return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
+}
+EXPORT_SYMBOL(dib7000m_get_i2c_master);
+
+int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[])
+{
+ struct dib7000m_state st = { .i2c_adap = i2c };
+ int k = 0;
+ u8 new_addr = 0;
+
+ for (k = no_of_demods-1; k >= 0; k--) {
+ st.cfg = cfg[k];
+
+ /* designated i2c address */
+ new_addr = (0x40 + k) << 1;
+ st.i2c_addr = new_addr;
+ if (dib7000m_identify(&st) != 0) {
+ st.i2c_addr = default_addr;
+ if (dib7000m_identify(&st) != 0) {
+ dprintk("DiB7000M #%d: not identified\n", k);
+ return -EIO;
+ }
+ }
+
+ /* start diversity to pull_down div_str - just for i2c-enumeration */
+ dib7000m_set_output_mode(&st, OUTMODE_DIVERSITY);
+
+ dib7000m_write_word(&st, 1796, 0x0); // select DVB-T output
+
+ /* set new i2c address and force divstart */
+ dib7000m_write_word(&st, 1794, (new_addr << 2) | 0x2);
+
+ dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
+ }
+
+ for (k = 0; k < no_of_demods; k++) {
+ st.cfg = cfg[k];
+ st.i2c_addr = (0x40 + k) << 1;
+
+ // unforce divstr
+ dib7000m_write_word(&st,1794, st.i2c_addr << 2);
+
+ /* deactivate div - it was just for i2c-enumeration */
+ dib7000m_set_output_mode(&st, OUTMODE_HIGH_Z);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(dib7000m_i2c_enumeration);
+
+static struct dvb_frontend_ops dib7000m_ops;
+struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg)
+{
+ struct dvb_frontend *demod;
+ struct dib7000m_state *st;
+ st = kzalloc(sizeof(struct dib7000m_state), GFP_KERNEL);
+ if (st == NULL)
+ return NULL;
+
+ memcpy(&st->cfg, cfg, sizeof(struct dib7000m_config));
+ st->i2c_adap = i2c_adap;
+ st->i2c_addr = i2c_addr;
+
+ demod = &st->demod;
+ demod->demodulator_priv = st;
+ memcpy(&st->demod.ops, &dib7000m_ops, sizeof(struct dvb_frontend_ops));
+
+ if (dib7000m_identify(st) != 0)
+ goto error;
+
+ if (st->revision == 0x4000)
+ dibx000_init_i2c_master(&st->i2c_master, DIB7000, st->i2c_adap, st->i2c_addr);
+ else
+ dibx000_init_i2c_master(&st->i2c_master, DIB7000MC, st->i2c_adap, st->i2c_addr);
+
+ dib7000m_demod_reset(st);
+
+ return demod;
+
+error:
+ kfree(st);
+ return NULL;
+}
+EXPORT_SYMBOL(dib7000m_attach);
+
+static struct dvb_frontend_ops dib7000m_ops = {
+ .info = {
+ .name = "DiBcom 7000MA/MB/PA/PB/MC",
+ .type = FE_OFDM,
+ .frequency_min = 44250000,
+ .frequency_max = 867250000,
+ .frequency_stepsize = 62500,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_RECOVER |
+ FE_CAN_HIERARCHY_AUTO,
+ },
+
+ .release = dib7000m_release,
+
+ .init = dib7000m_init,
+ .sleep = dib7000m_sleep,
+
+ .set_frontend = dib7000m_set_frontend,
+ .get_tune_settings = dib7000m_fe_get_tune_settings,
+ .get_frontend = dib7000m_get_frontend,
+
+ .read_status = dib7000m_read_status,
+ .read_ber = dib7000m_read_ber,
+ .read_signal_strength = dib7000m_read_signal_strength,
+ .read_snr = dib7000m_read_snr,
+ .read_ucblocks = dib7000m_read_unc_blocks,
+};
+
+MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 7000MA/MB/PA/PB/MC COFDM demodulator");
+MODULE_LICENSE("GPL");
--- /dev/null
+#ifndef DIB7000M_H
+#define DIB7000M_H
+
+#include "dibx000_common.h"
+
+struct dib7000m_config {
+ u8 dvbt_mode;
+ u8 output_mpeg2_in_188_bytes;
+ u8 hostbus_diversity;
+ u8 tuner_is_baseband;
+ u8 mobile_mode;
+ int (*update_lna) (struct dvb_frontend *, u16 agc_global);
+
+ u8 agc_config_count;
+ struct dibx000_agc_config *agc;
+
+ struct dibx000_bandwidth_config *bw;
+
+#define DIB7000M_GPIO_DEFAULT_DIRECTIONS 0xffff
+ u16 gpio_dir;
+#define DIB7000M_GPIO_DEFAULT_VALUES 0x0000
+ u16 gpio_val;
+#define DIB7000M_GPIO_PWM_POS0(v) ((v & 0xf) << 12)
+#define DIB7000M_GPIO_PWM_POS1(v) ((v & 0xf) << 8 )
+#define DIB7000M_GPIO_PWM_POS2(v) ((v & 0xf) << 4 )
+#define DIB7000M_GPIO_PWM_POS3(v) (v & 0xf)
+#define DIB7000M_GPIO_DEFAULT_PWM_POS 0xffff
+ u16 gpio_pwm_pos;
+
+ u16 pwm_freq_div;
+
+ u8 quartz_direct;
+
+ u8 input_clk_is_div_2;
+
+ int (*agc_control) (struct dvb_frontend *, u8 before);
+};
+
+#define DEFAULT_DIB7000M_I2C_ADDRESS 18
+
+extern struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg);
+extern struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
+
+/* TODO
+extern INT dib7000m_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val);
+extern INT dib7000m_enable_vbg_voltage(struct dibDemod *demod);
+extern void dib7000m_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
+extern USHORT dib7000m_get_current_agc_global(struct dibDemod *demod);
+*/
+
+#endif
--- /dev/null
+/*
+ * Linux-DVB Driver for DiBcom's second generation DiB7000P (PC).
+ *
+ * Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "dib7000p.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P:"); printk(args); } } while (0)
+
+struct dib7000p_state {
+ struct dvb_frontend demod;
+ struct dib7000p_config cfg;
+
+ u8 i2c_addr;
+ struct i2c_adapter *i2c_adap;
+
+ struct dibx000_i2c_master i2c_master;
+
+ u16 wbd_ref;
+
+ u8 current_band;
+ fe_bandwidth_t current_bandwidth;
+ struct dibx000_agc_config *current_agc;
+ u32 timf;
+
+ u16 gpio_dir;
+ u16 gpio_val;
+};
+
+enum dib7000p_power_mode {
+ DIB7000P_POWER_ALL = 0,
+ DIB7000P_POWER_INTERFACE_ONLY,
+};
+
+static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg)
+{
+ u8 wb[2] = { reg >> 8, reg & 0xff };
+ u8 rb[2];
+ struct i2c_msg msg[2] = {
+ { .addr = state->i2c_addr >> 1, .flags = 0, .buf = wb, .len = 2 },
+ { .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
+ };
+
+ if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
+ dprintk("i2c read error on %d\n",reg);
+
+ return (rb[0] << 8) | rb[1];
+}
+
+static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val)
+{
+ u8 b[4] = {
+ (reg >> 8) & 0xff, reg & 0xff,
+ (val >> 8) & 0xff, val & 0xff,
+ };
+ struct i2c_msg msg = {
+ .addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
+ };
+ return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+}
+static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode)
+{
+ int ret = 0;
+ u16 outreg, fifo_threshold, smo_mode;
+
+ outreg = 0;
+ fifo_threshold = 1792;
+ smo_mode = (dib7000p_read_word(state, 235) & 0x0010) | (1 << 1);
+
+ dprintk("-I- Setting output mode for demod %p to %d\n",
+ &state->demod, mode);
+
+ switch (mode) {
+ case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock
+ outreg = (1 << 10); /* 0x0400 */
+ break;
+ case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock
+ outreg = (1 << 10) | (1 << 6); /* 0x0440 */
+ break;
+ case OUTMODE_MPEG2_SERIAL: // STBs with serial input
+ outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0480 */
+ break;
+ case OUTMODE_DIVERSITY:
+ if (state->cfg.hostbus_diversity)
+ outreg = (1 << 10) | (4 << 6); /* 0x0500 */
+ else
+ outreg = (1 << 11);
+ break;
+ case OUTMODE_MPEG2_FIFO: // e.g. USB feeding
+ smo_mode |= (3 << 1);
+ fifo_threshold = 512;
+ outreg = (1 << 10) | (5 << 6);
+ break;
+ case OUTMODE_HIGH_Z: // disable
+ outreg = 0;
+ break;
+ default:
+ dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
+ break;
+ }
+
+ if (state->cfg.output_mpeg2_in_188_bytes)
+ smo_mode |= (1 << 5) ;
+
+ ret |= dib7000p_write_word(state, 235, smo_mode);
+ ret |= dib7000p_write_word(state, 236, fifo_threshold); /* synchronous fread */
+ ret |= dib7000p_write_word(state, 1286, outreg); /* P_Div_active */
+
+ return ret;
+}
+
+static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode)
+{
+ /* by default everything is powered off */
+ u16 reg_774 = 0xffff, reg_775 = 0xffff, reg_776 = 0x0007, reg_899 = 0x0003,
+ reg_1280 = (0xfe00) | (dib7000p_read_word(state, 1280) & 0x01ff);
+
+ /* now, depending on the requested mode, we power on */
+ switch (mode) {
+ /* power up everything in the demod */
+ case DIB7000P_POWER_ALL:
+ reg_774 = 0x0000; reg_775 = 0x0000; reg_776 = 0x0; reg_899 = 0x0; reg_1280 &= 0x01ff;
+ break;
+ /* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */
+ case DIB7000P_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C */
+ reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10));
+ break;
+/* TODO following stuff is just converted from the dib7000-driver - check when is used what */
+ }
+
+ dib7000p_write_word(state, 774, reg_774);
+ dib7000p_write_word(state, 775, reg_775);
+ dib7000p_write_word(state, 776, reg_776);
+ dib7000p_write_word(state, 899, reg_899);
+ dib7000p_write_word(state, 1280, reg_1280);
+
+ return 0;
+}
+
+static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_adc_states no)
+{
+ u16 reg_908 = dib7000p_read_word(state, 908),
+ reg_909 = dib7000p_read_word(state, 909);
+
+ switch (no) {
+ case DIBX000_SLOW_ADC_ON:
+ reg_909 |= (1 << 1) | (1 << 0);
+ dib7000p_write_word(state, 909, reg_909);
+ reg_909 &= ~(1 << 1);
+ break;
+
+ case DIBX000_SLOW_ADC_OFF:
+ reg_909 |= (1 << 1) | (1 << 0);
+ break;
+
+ case DIBX000_ADC_ON:
+ reg_908 &= 0x0fff;
+ reg_909 &= 0x0003;
+ break;
+
+ case DIBX000_ADC_OFF: // leave the VBG voltage on
+ reg_908 |= (1 << 14) | (1 << 13) | (1 << 12);
+ reg_909 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
+ break;
+
+ case DIBX000_VBG_ENABLE:
+ reg_908 &= ~(1 << 15);
+ break;
+
+ case DIBX000_VBG_DISABLE:
+ reg_908 |= (1 << 15);
+ break;
+
+ default:
+ break;
+ }
+
+// dprintk("908: %x, 909: %x\n", reg_908, reg_909);
+
+ dib7000p_write_word(state, 908, reg_908);
+ dib7000p_write_word(state, 909, reg_909);
+}
+
+static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx)
+{
+ struct dib7000p_state *state = demod->demodulator_priv;
+ u32 timf;
+
+ // store the current bandwidth for later use
+ state->current_bandwidth = BW_Idx;
+
+ if (state->timf == 0) {
+ dprintk("-D- Using default timf\n");
+ timf = state->cfg.bw->timf;
+ } else {
+ dprintk("-D- Using updated timf\n");
+ timf = state->timf;
+ }
+
+ timf = timf * (BW_INDEX_TO_KHZ(BW_Idx) / 100) / 80;
+
+ dprintk("timf: %d\n",timf);
+
+ dib7000p_write_word(state, 23, (timf >> 16) & 0xffff);
+ dib7000p_write_word(state, 24, (timf ) & 0xffff);
+
+ return 0;
+}
+
+static int dib7000p_sad_calib(struct dib7000p_state *state)
+{
+/* internal */
+// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+ dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
+ dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096
+
+ /* do the calibration */
+ dib7000p_write_word(state, 73, (1 << 0));
+ dib7000p_write_word(state, 73, (0 << 0));
+
+ msleep(1);
+
+ return 0;
+}
+
+static void dib7000p_reset_pll(struct dib7000p_state *state)
+{
+ struct dibx000_bandwidth_config *bw = &state->cfg.bw[0];
+
+ dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset);
+ dib7000p_write_word(state, 900, ((bw->pll_ratio & 0x3f) << 9) | (bw->pll_bypass << 15) | (bw->modulo << 7) | (bw->ADClkSrc << 6) |
+ (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0));
+
+ dib7000p_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff);
+ dib7000p_write_word(state, 19, (bw->internal*1000 ) & 0xffff);
+ dib7000p_write_word(state, 21, (bw->ifreq >> 16) & 0xffff);
+ dib7000p_write_word(state, 22, (bw->ifreq ) & 0xffff);
+
+ dib7000p_write_word(state, 72, bw->sad_cfg);
+}
+
+static int dib7000p_reset_gpio(struct dib7000p_state *st)
+{
+ /* reset the GPIOs */
+ dprintk("-D- gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",st->gpio_dir, st->gpio_val,st->cfg.gpio_pwm_pos);
+
+ dib7000p_write_word(st, 1029, st->gpio_dir);
+ dib7000p_write_word(st, 1030, st->gpio_val);
+
+ /* TODO 1031 is P_gpio_od */
+
+ dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos);
+
+ dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div);
+ return 0;
+}
+
+static int dib7000p_demod_reset(struct dib7000p_state *state)
+{
+ dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+
+ dib7000p_set_adc_state(state, DIBX000_VBG_ENABLE);
+
+ /* restart all parts */
+ dib7000p_write_word(state, 770, 0xffff);
+ dib7000p_write_word(state, 771, 0xffff);
+ dib7000p_write_word(state, 772, 0x001f);
+ dib7000p_write_word(state, 898, 0x0003);
+ /* except i2c, sdio, gpio - control interfaces */
+ dib7000p_write_word(state, 1280, 0x01fc - ((1 << 7) | (1 << 6) | (1 << 5)) );
+
+ dib7000p_write_word(state, 770, 0);
+ dib7000p_write_word(state, 771, 0);
+ dib7000p_write_word(state, 772, 0);
+ dib7000p_write_word(state, 898, 0);
+ dib7000p_write_word(state, 1280, 0);
+
+ /* default */
+ dib7000p_reset_pll(state);
+
+ if (dib7000p_reset_gpio(state) != 0)
+ dprintk("-E- GPIO reset was not successful.\n");
+
+ if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
+ dprintk("-E- OUTPUT_MODE could not be resetted.\n");
+
+ /* unforce divstr regardless whether i2c enumeration was done or not */
+ dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1) );
+
+ dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
+
+ return 0;
+}
+
+static void dib7000p_restart_agc(struct dib7000p_state *state)
+{
+ // P_restart_iqc & P_restart_agc
+ dib7000p_write_word(state, 770, 0x0c00);
+ dib7000p_write_word(state, 770, 0x0000);
+}
+
+static void dib7000p_update_lna(struct dib7000p_state *state)
+{
+ int i;
+ u16 dyn_gain;
+
+ // when there is no LNA to program return immediatly
+ if (state->cfg.update_lna == NULL)
+ return;
+
+ for (i = 0; i < 5; i++) {
+ // read dyn_gain here (because it is demod-dependent and not tuner)
+ dyn_gain = dib7000p_read_word(state, 394);
+
+ if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
+ dib7000p_restart_agc(state);
+ msleep(5);
+ } else
+ break;
+ }
+}
+
+static void dib7000p_pll_clk_cfg(struct dib7000p_state *state)
+{
+ u16 tmp = 0;
+ tmp = dib7000p_read_word(state, 903);
+ dib7000p_write_word(state, 903, (tmp | 0x1)); //pwr-up pll
+ tmp = dib7000p_read_word(state, 900);
+ dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6)); //use High freq clock
+}
+
+static void dib7000p_update_timf_freq(struct dib7000p_state *state)
+{
+ u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428);
+ state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100);
+ dib7000p_write_word(state, 23, (u16) (timf >> 16));
+ dib7000p_write_word(state, 24, (u16) (timf & 0xffff));
+ dprintk("-D- Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf);
+}
+
+static void dib7000p_set_channel(struct dib7000p_state *state, struct dibx000_ofdm_channel *ch, u8 seq)
+{
+ u16 tmp, est[4]; // reg_26, reg_32, reg_33, reg_187, reg_188, reg_189, reg_190, reg_207, reg_208;
+
+ /* nfft, guard, qam, alpha */
+ dib7000p_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha));
+ dib7000p_write_word(state, 5, (seq << 4) | 1); /* do not force tps, search list 0 */
+
+ /* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */
+ tmp = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1);
+ if (ch->vit_hrch == 0 || ch->vit_select_hp == 1)
+ tmp |= (ch->vit_code_rate_hp << 1);
+ else
+ tmp |= (ch->vit_code_rate_lp << 1);
+ dib7000p_write_word(state, 208, tmp);
+
+ /* P_dvsy_sync_wait */
+ switch (ch->nfft) {
+ case 1: tmp = 256; break;
+ case 2: tmp = 128; break;
+ case 0:
+ default: tmp = 64; break;
+ }
+ tmp *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin
+ tmp <<= 4;
+
+ /* deactive the possibility of diversity reception if extended interleave */
+ /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
+ if (ch->intlv_native || ch->nfft == 1)
+ tmp |= (1 << 2) | (2 << 0);
+ dib7000p_write_word(state, 207, tmp);
+
+ dib7000p_write_word(state, 26, 0x6680); // timf(6xxx)
+ dib7000p_write_word(state, 29, 0x1273); // isi inh1273 on1073
+ dib7000p_write_word(state, 32, 0x0003); // pha_off_max(xxx3)
+ dib7000p_write_word(state, 33, 0x0005); // sfreq(xxx5)
+
+ /* channel estimation fine configuration */
+ switch (ch->nqam) {
+ case 2:
+ est[0] = 0x0148; /* P_adp_regul_cnt 0.04 */
+ est[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */
+ est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
+ est[3] = 0xfff8; /* P_adp_noise_ext -0.001 */
+ break;
+ case 1:
+ est[0] = 0x023d; /* P_adp_regul_cnt 0.07 */
+ est[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */
+ est[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
+ est[3] = 0xfff0; /* P_adp_noise_ext -0.002 */
+ break;
+ default:
+ est[0] = 0x099a; /* P_adp_regul_cnt 0.3 */
+ est[1] = 0xffae; /* P_adp_noise_cnt -0.01 */
+ est[2] = 0x0333; /* P_adp_regul_ext 0.1 */
+ est[3] = 0xfff8; /* P_adp_noise_ext -0.002 */
+ break;
+ }
+ for (tmp = 0; tmp < 4; tmp++)
+ dib7000p_write_word(state, 187 + tmp, est[tmp]);
+
+ // set power-up level: interf+analog+AGC
+ dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+ dib7000p_set_adc_state(state, DIBX000_ADC_ON);
+ dib7000p_pll_clk_cfg(state);
+ msleep(7);
+
+ // AGC initialization
+ if (state->cfg.agc_control)
+ state->cfg.agc_control(&state->demod, 1);
+
+ dib7000p_restart_agc(state);
+
+ // wait AGC rough lock time
+ msleep(5);
+
+ dib7000p_update_lna(state);
+
+ // wait AGC accurate lock time
+ msleep(7);
+ if (state->cfg.agc_control)
+ state->cfg.agc_control(&state->demod, 0);
+}
+
+static int dib7000p_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+ struct dib7000p_state *state = demod->demodulator_priv;
+ struct dibx000_ofdm_channel auto_ch;
+ u32 value;
+
+ INIT_OFDM_CHANNEL(&auto_ch);
+ auto_ch.RF_kHz = ch->RF_kHz;
+ auto_ch.Bw = ch->Bw;
+ auto_ch.nqam = 2;
+ auto_ch.guard = 0;
+ auto_ch.nfft = 1;
+ auto_ch.vit_alpha = 1;
+ auto_ch.vit_select_hp = 1;
+ auto_ch.vit_code_rate_hp = 2;
+ auto_ch.vit_code_rate_lp = 3;
+ auto_ch.vit_hrch = 0;
+ auto_ch.intlv_native = 1;
+
+ dib7000p_set_channel(state, &auto_ch, 7);
+
+ // always use the setting for 8MHz here lock_time for 7,6 MHz are longer
+ value = 30 * state->cfg.bw->internal;
+ dib7000p_write_word(state, 6, (u16) ((value >> 16) & 0xffff)); // lock0 wait time
+ dib7000p_write_word(state, 7, (u16) (value & 0xffff)); // lock0 wait time
+ value = 100 * state->cfg.bw->internal;
+ dib7000p_write_word(state, 8, (u16) ((value >> 16) & 0xffff)); // lock1 wait time
+ dib7000p_write_word(state, 9, (u16) (value & 0xffff)); // lock1 wait time
+ value = 500 * state->cfg.bw->internal;
+ dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
+ dib7000p_write_word(state, 11, (u16) (value & 0xffff)); // lock2 wait time
+
+ value = dib7000p_read_word(state, 0);
+ dib7000p_write_word(state, 0, (1 << 9) | value);
+ dib7000p_read_word(state, 1284);
+ dib7000p_write_word(state, 0, (u16) value);
+
+ return 0;
+}
+
+static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod)
+{
+ struct dib7000p_state *state = demod->demodulator_priv;
+ u16 irq_pending = dib7000p_read_word(state, 1284);
+
+ if (irq_pending & 0x1) // failed
+ return 1;
+
+ if (irq_pending & 0x2) // succeeded
+ return 2;
+
+ return 0; // still pending
+}
+
+static int dib7000p_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+ struct dib7000p_state *state = demod->demodulator_priv;
+ u16 tmp = 0;
+
+ if (ch != NULL)
+ dib7000p_set_channel(state, ch, 0);
+ else
+ return -EINVAL;
+
+ // restart demod
+ dib7000p_write_word(state, 770, 0x4000);
+ dib7000p_write_word(state, 770, 0x0000);
+ msleep(45);
+
+ /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
+ dib7000p_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
+
+ // never achieved a lock with that bandwidth so far - wait for osc-freq to update
+ if (state->timf == 0)
+ msleep(200);
+
+ /* offset loop parameters */
+
+ /* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
+ tmp = (6 << 8) | 0x80;
+ switch (ch->nfft) {
+ case 0: tmp |= (7 << 12); break;
+ case 1: tmp |= (9 << 12); break;
+ case 2: tmp |= (8 << 12); break;
+ }
+ dib7000p_write_word(state, 26, tmp); /* timf_a(6xxx) */
+
+ /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
+ tmp = (0 << 4);
+ switch (ch->nfft) {
+ case 0: tmp |= 0x6; break;
+ case 1: tmp |= 0x8; break;
+ case 2: tmp |= 0x7; break;
+ }
+ dib7000p_write_word(state, 32, tmp);
+
+ /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
+ tmp = (0 << 4);
+ switch (ch->nfft) {
+ case 0: tmp |= 0x6; break;
+ case 1: tmp |= 0x8; break;
+ case 2: tmp |= 0x7; break;
+ }
+ dib7000p_write_word(state, 33, tmp);
+
+ tmp = dib7000p_read_word(state,509);
+ if (!((tmp >> 6) & 0x1)) {
+ /* restart the fec */
+ tmp = dib7000p_read_word(state,771);
+ dib7000p_write_word(state, 771, tmp | (1 << 1));
+ dib7000p_write_word(state, 771, tmp);
+ msleep(10);
+ tmp = dib7000p_read_word(state,509);
+ }
+
+ // we achieved a lock - it's time to update the osc freq
+ if ((tmp >> 6) & 0x1)
+ dib7000p_update_timf_freq(state);
+
+ return 0;
+}
+
+static int dib7000p_init(struct dvb_frontend *demod)
+{
+ struct dibx000_agc_config *agc;
+ struct dib7000p_state *state = demod->demodulator_priv;
+ int ret = 0;
+
+ // Demodulator default configuration
+ agc = state->cfg.agc;
+
+ dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+ dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON);
+
+ /* AGC */
+ ret |= dib7000p_write_word(state, 75 , agc->setup );
+ ret |= dib7000p_write_word(state, 76 , agc->inv_gain );
+ ret |= dib7000p_write_word(state, 77 , agc->time_stabiliz );
+ ret |= dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock);
+
+ // Demod AGC loop configuration
+ ret |= dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp);
+ ret |= dib7000p_write_word(state, 102, (agc->beta_mant << 6) | agc->beta_exp);
+
+ /* AGC continued */
+ dprintk("-D- WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
+ state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
+
+ if (state->wbd_ref != 0)
+ ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref);
+ else
+ ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref);
+
+ ret |= dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
+
+ ret |= dib7000p_write_word(state, 107, agc->agc1_max);
+ ret |= dib7000p_write_word(state, 108, agc->agc1_min);
+ ret |= dib7000p_write_word(state, 109, agc->agc2_max);
+ ret |= dib7000p_write_word(state, 110, agc->agc2_min);
+ ret |= dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
+ ret |= dib7000p_write_word(state, 112, agc->agc1_pt3);
+ ret |= dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+ ret |= dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+ ret |= dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+
+ /* disable power smoothing */
+ ret |= dib7000p_write_word(state, 145, 0);
+ ret |= dib7000p_write_word(state, 146, 0);
+ ret |= dib7000p_write_word(state, 147, 0);
+ ret |= dib7000p_write_word(state, 148, 0);
+ ret |= dib7000p_write_word(state, 149, 0);
+ ret |= dib7000p_write_word(state, 150, 0);
+ ret |= dib7000p_write_word(state, 151, 0);
+ ret |= dib7000p_write_word(state, 152, 0);
+
+ // P_timf_alpha=6, P_corm_alpha=6, P_corm_thres=128 default: 6,4,26
+ ret |= dib7000p_write_word(state, 26 ,0x6680);
+
+ // P_palf_filter_on=1, P_palf_filter_freeze=0, P_palf_alpha_regul=16
+ ret |= dib7000p_write_word(state, 142,0x0410);
+ // P_fft_freq_dir=1, P_fft_nb_to_cut=0
+ ret |= dib7000p_write_word(state, 154,1 << 13);
+ // P_pha3_thres, default 0x3000
+ ret |= dib7000p_write_word(state, 168,0x0ccd);
+ // P_cti_use_cpe=0, P_cti_use_prog=0, P_cti_win_len=16, default: 0x0010
+ //ret |= dib7000p_write_word(state, 169,0x0010);
+ // P_cspu_regul=512, P_cspu_win_cut=15, default: 0x2005
+ ret |= dib7000p_write_word(state, 183,0x200f);
+ // P_adp_regul_cnt=573, default: 410
+ ret |= dib7000p_write_word(state, 187,0x023d);
+ // P_adp_noise_cnt=
+ ret |= dib7000p_write_word(state, 188,0x00a4);
+ // P_adp_regul_ext
+ ret |= dib7000p_write_word(state, 189,0x00a4);
+ // P_adp_noise_ext
+ ret |= dib7000p_write_word(state, 190,0x7ff0);
+ // P_adp_fil
+ ret |= dib7000p_write_word(state, 191,0x3ccc);
+
+ ret |= dib7000p_write_word(state, 222,0x0010);
+ // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+ ret |= dib7000p_write_word(state, 235,0x0062);
+
+ // P_iqc_alpha_pha, P_iqc_alpha_amp_dcc_alpha, ...
+ if(state->cfg.tuner_is_baseband)
+ ret |= dib7000p_write_word(state, 36,0x0755);
+ else
+ ret |= dib7000p_write_word(state, 36,0x1f55);
+
+ // auto search configuration
+ ret |= dib7000p_write_word(state, 2 ,0x0004);
+ ret |= dib7000p_write_word(state, 3 ,0x1000);
+
+ /* Equal Lock */
+ ret |= dib7000p_write_word(state, 4 ,0x0814);
+
+ ret |= dib7000p_write_word(state, 6 ,0x001b);
+ ret |= dib7000p_write_word(state, 7 ,0x7740);
+ ret |= dib7000p_write_word(state, 8 ,0x005b);
+ ret |= dib7000p_write_word(state, 9 ,0x8d80);
+ ret |= dib7000p_write_word(state, 10 ,0x01c9);
+ ret |= dib7000p_write_word(state, 11 ,0xc380);
+ ret |= dib7000p_write_word(state, 12 ,0x0000);
+ ret |= dib7000p_write_word(state, 13 ,0x0080);
+ ret |= dib7000p_write_word(state, 14 ,0x0000);
+ ret |= dib7000p_write_word(state, 15 ,0x0090);
+ ret |= dib7000p_write_word(state, 16 ,0x0001);
+ ret |= dib7000p_write_word(state, 17 ,0xd4c0);
+
+ // P_clk_cfg1
+ ret |= dib7000p_write_word(state, 901, 0x0006);
+
+ // P_divclksel=3 P_divbitsel=1
+ ret |= dib7000p_write_word(state, 902, (3 << 10) | (1 << 6));
+
+ // Tuner IO bank: max drive (14mA) + divout pads max drive
+ ret |= dib7000p_write_word(state, 905, 0x2c8e);
+
+ ret |= dib7000p_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
+ dib7000p_sad_calib(state);
+
+ return ret;
+}
+
+static int dib7000p_sleep(struct dvb_frontend *demod)
+{
+ struct dib7000p_state *state = demod->demodulator_priv;
+ return dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
+}
+
+static int dib7000p_identify(struct dib7000p_state *st)
+{
+ u16 value;
+ dprintk("-I- DiB7000PC: checking demod on I2C address: %d (%x)\n",
+ st->i2c_addr, st->i2c_addr);
+
+ if ((value = dib7000p_read_word(st, 768)) != 0x01b3) {
+ dprintk("-E- DiB7000PC: wrong Vendor ID (read=0x%x)\n",value);
+ return -EREMOTEIO;
+ }
+
+ if ((value = dib7000p_read_word(st, 769)) != 0x4000) {
+ dprintk("-E- DiB7000PC: wrong Device ID (%x)\n",value);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+
+static int dib7000p_get_frontend(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct dib7000p_state *state = fe->demodulator_priv;
+ u16 tps = dib7000p_read_word(state,463);
+
+ fep->inversion = INVERSION_AUTO;
+
+ fep->u.ofdm.bandwidth = state->current_bandwidth;
+
+ switch ((tps >> 8) & 0x3) {
+ case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break;
+ case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break;
+ /* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */
+ }
+
+ switch (tps & 0x3) {
+ case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break;
+ case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break;
+ case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break;
+ case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break;
+ }
+
+ switch ((tps >> 14) & 0x3) {
+ case 0: fep->u.ofdm.constellation = QPSK; break;
+ case 1: fep->u.ofdm.constellation = QAM_16; break;
+ case 2:
+ default: fep->u.ofdm.constellation = QAM_64; break;
+ }
+
+ /* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
+ /* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */
+
+ fep->u.ofdm.hierarchy_information = HIERARCHY_NONE;
+ switch ((tps >> 5) & 0x7) {
+ case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break;
+ case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break;
+ case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break;
+ case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break;
+ case 7:
+ default: fep->u.ofdm.code_rate_HP = FEC_7_8; break;
+
+ }
+
+ switch ((tps >> 2) & 0x7) {
+ case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break;
+ case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break;
+ case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break;
+ case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break;
+ case 7:
+ default: fep->u.ofdm.code_rate_LP = FEC_7_8; break;
+ }
+
+ /* native interleaver: (dib7000p_read_word(state, 464) >> 5) & 0x1 */
+
+ return 0;
+}
+
+static int dib7000p_set_frontend(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct dib7000p_state *state = fe->demodulator_priv;
+ struct dibx000_ofdm_channel ch;
+
+ INIT_OFDM_CHANNEL(&ch);
+ FEP2DIB(fep,&ch);
+
+ state->current_bandwidth = fep->u.ofdm.bandwidth;
+ dib7000p_set_bandwidth(fe, fep->u.ofdm.bandwidth);
+
+ if (fe->ops.tuner_ops.set_params)
+ fe->ops.tuner_ops.set_params(fe, fep);
+
+ if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
+ fep->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ||
+ fep->u.ofdm.constellation == QAM_AUTO ||
+ fep->u.ofdm.code_rate_HP == FEC_AUTO) {
+ int i = 800, found;
+
+ dib7000p_autosearch_start(fe, &ch);
+ do {
+ msleep(1);
+ found = dib7000p_autosearch_is_irq(fe);
+ } while (found == 0 && i--);
+
+ dprintk("autosearch returns: %d\n",found);
+ if (found == 0 || found == 1)
+ return 0; // no channel found
+
+ dib7000p_get_frontend(fe, fep);
+ FEP2DIB(fep, &ch);
+ }
+
+ /* make this a config parameter */
+ dib7000p_set_output_mode(state, OUTMODE_MPEG2_FIFO);
+
+ return dib7000p_tune(fe, &ch);
+}
+
+static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t *stat)
+{
+ struct dib7000p_state *state = fe->demodulator_priv;
+ u16 lock = dib7000p_read_word(state, 509);
+
+ *stat = 0;
+
+ if (lock & 0x8000)
+ *stat |= FE_HAS_SIGNAL;
+ if (lock & 0x3000)
+ *stat |= FE_HAS_CARRIER;
+ if (lock & 0x0100)
+ *stat |= FE_HAS_VITERBI;
+ if (lock & 0x0010)
+ *stat |= FE_HAS_SYNC;
+ if (lock & 0x0008)
+ *stat |= FE_HAS_LOCK;
+
+ return 0;
+}
+
+static int dib7000p_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct dib7000p_state *state = fe->demodulator_priv;
+ *ber = (dib7000p_read_word(state, 500) << 16) | dib7000p_read_word(state, 501);
+ return 0;
+}
+
+static int dib7000p_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
+{
+ struct dib7000p_state *state = fe->demodulator_priv;
+ *unc = dib7000p_read_word(state, 506);
+ return 0;
+}
+
+static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct dib7000p_state *state = fe->demodulator_priv;
+ u16 val = dib7000p_read_word(state, 394);
+ *strength = 65535 - val;
+ return 0;
+}
+
+static int dib7000p_read_snr(struct dvb_frontend* fe, u16 *snr)
+{
+ *snr = 0x0000;
+ return 0;
+}
+
+static int dib7000p_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+ tune->min_delay_ms = 1000;
+ return 0;
+}
+
+static void dib7000p_release(struct dvb_frontend *demod)
+{
+ struct dib7000p_state *st = demod->demodulator_priv;
+ dibx000_exit_i2c_master(&st->i2c_master);
+ kfree(st);
+}
+
+int dib7000pc_detection(struct i2c_adapter *i2c_adap)
+{
+ u8 tx[2], rx[2];
+ struct i2c_msg msg[2] = {
+ { .addr = 18 >> 1, .flags = 0, .buf = tx, .len = 2 },
+ { .addr = 18 >> 1, .flags = I2C_M_RD, .buf = rx, .len = 2 },
+ };
+
+ tx[0] = 0x03;
+ tx[1] = 0x00;
+
+ if (i2c_transfer(i2c_adap, msg, 2) == 2)
+ if (rx[0] == 0x01 && rx[1] == 0xb3) {
+ dprintk("-D- DiB7000PC detected\n");
+ return 1;
+ }
+
+ msg[0].addr = msg[1].addr = 0x40;
+
+ if (i2c_transfer(i2c_adap, msg, 2) == 2)
+ if (rx[0] == 0x01 && rx[1] == 0xb3) {
+ dprintk("-D- DiB7000PC detected\n");
+ return 1;
+ }
+
+ dprintk("-D- DiB7000PC not detected\n");
+ return 0;
+}
+EXPORT_SYMBOL(dib7000pc_detection);
+
+struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
+{
+ struct dib7000p_state *st = demod->demodulator_priv;
+ return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
+}
+EXPORT_SYMBOL(dib7000p_get_i2c_master);
+
+int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[])
+{
+ struct dib7000p_state st = { .i2c_adap = i2c };
+ int k = 0;
+ u8 new_addr = 0;
+
+ for (k = no_of_demods-1; k >= 0; k--) {
+ st.cfg = cfg[k];
+
+ /* designated i2c address */
+ new_addr = (0x40 + k) << 1;
+ st.i2c_addr = new_addr;
+ if (dib7000p_identify(&st) != 0) {
+ st.i2c_addr = default_addr;
+ if (dib7000p_identify(&st) != 0) {
+ dprintk("DiB7000P #%d: not identified\n", k);
+ return -EIO;
+ }
+ }
+
+ /* start diversity to pull_down div_str - just for i2c-enumeration */
+ dib7000p_set_output_mode(&st, OUTMODE_DIVERSITY);
+
+ /* set new i2c address and force divstart */
+ dib7000p_write_word(&st, 1285, (new_addr << 2) | 0x2);
+
+ dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
+ }
+
+ for (k = 0; k < no_of_demods; k++) {
+ st.cfg = cfg[k];
+ st.i2c_addr = (0x40 + k) << 1;
+
+ // unforce divstr
+ dib7000p_write_word(&st, 1285, st.i2c_addr << 2);
+
+ /* deactivate div - it was just for i2c-enumeration */
+ dib7000p_set_output_mode(&st, OUTMODE_HIGH_Z);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(dib7000p_i2c_enumeration);
+
+static struct dvb_frontend_ops dib7000p_ops;
+struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg)
+{
+ struct dvb_frontend *demod;
+ struct dib7000p_state *st;
+ st = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL);
+ if (st == NULL)
+ return NULL;
+
+ memcpy(&st->cfg, cfg, sizeof(struct dib7000p_config));
+ st->i2c_adap = i2c_adap;
+ st->i2c_addr = i2c_addr;
+ st->gpio_val = cfg->gpio_val;
+ st->gpio_dir = cfg->gpio_dir;
+
+ demod = &st->demod;
+ demod->demodulator_priv = st;
+ memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops));
+
+ if (dib7000p_identify(st) != 0)
+ goto error;
+
+ dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr);
+
+ dib7000p_demod_reset(st);
+
+ return demod;
+
+error:
+ kfree(st);
+ return NULL;
+}
+EXPORT_SYMBOL(dib7000p_attach);
+
+static struct dvb_frontend_ops dib7000p_ops = {
+ .info = {
+ .name = "DiBcom 7000PC",
+ .type = FE_OFDM,
+ .frequency_min = 44250000,
+ .frequency_max = 867250000,
+ .frequency_stepsize = 62500,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_RECOVER |
+ FE_CAN_HIERARCHY_AUTO,
+ },
+
+ .release = dib7000p_release,
+
+ .init = dib7000p_init,
+ .sleep = dib7000p_sleep,
+
+ .set_frontend = dib7000p_set_frontend,
+ .get_tune_settings = dib7000p_fe_get_tune_settings,
+ .get_frontend = dib7000p_get_frontend,
+
+ .read_status = dib7000p_read_status,
+ .read_ber = dib7000p_read_ber,
+ .read_signal_strength = dib7000p_read_signal_strength,
+ .read_snr = dib7000p_read_snr,
+ .read_ucblocks = dib7000p_read_unc_blocks,
+};
+
+MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator");
+MODULE_LICENSE("GPL");
--- /dev/null
+#ifndef DIB7000P_H
+#define DIB7000P_H
+
+#include "dibx000_common.h"
+
+struct dib7000p_config {
+ u8 output_mpeg2_in_188_bytes;
+ u8 hostbus_diversity;
+ u8 tuner_is_baseband;
+ int (*update_lna) (struct dvb_frontend *, u16 agc_global);
+
+ struct dibx000_agc_config *agc;
+ struct dibx000_bandwidth_config *bw;
+
+#define DIB7000P_GPIO_DEFAULT_DIRECTIONS 0xffff
+ u16 gpio_dir;
+#define DIB7000P_GPIO_DEFAULT_VALUES 0x0000
+ u16 gpio_val;
+#define DIB7000P_GPIO_PWM_POS0(v) ((v & 0xf) << 12)
+#define DIB7000P_GPIO_PWM_POS1(v) ((v & 0xf) << 8 )
+#define DIB7000P_GPIO_PWM_POS2(v) ((v & 0xf) << 4 )
+#define DIB7000P_GPIO_PWM_POS3(v) (v & 0xf)
+#define DIB7000P_GPIO_DEFAULT_PWM_POS 0xffff
+ u16 gpio_pwm_pos;
+
+ u16 pwm_freq_div;
+
+ u8 quartz_direct;
+
+ int (*agc_control) (struct dvb_frontend *, u8 before);
+};
+
+#define DEFAULT_DIB7000P_I2C_ADDRESS 18
+
+extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
+extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
+extern int dib7000pc_detection(struct i2c_adapter *i2c_adap);
+
+/* TODO
+extern INT dib7000p_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val);
+extern INT dib7000p_enable_vbg_voltage(struct dibDemod *demod);
+extern void dib7000p_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
+extern USHORT dib7000p_get_current_agc_global(struct dibDemod *demod);
+*/
+
+#endif
#define BAND_LBAND 0x01
#define BAND_UHF 0x02
#define BAND_VHF 0x04
+#define BAND_SBAND 0x08
+#define BAND_FM 0x10
+
+#define BAND_OF_FREQUENCY(freq_kHz) ( (freq_kHz) <= 115000 ? BAND_FM : \
+ (freq_kHz) <= 250000 ? BAND_VHF : \
+ (freq_kHz) <= 863000 ? BAND_UHF : \
+ (freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
struct dibx000_agc_config {
/* defines the capabilities of this AGC-setting - using the BAND_-defines*/
/* I hope I can get rid of the following kludge in the near future */
struct dibx000_ofdm_channel {
+ u32 RF_kHz;
u8 Bw;
s16 nfft;
s16 guard;
s16 vit_alpha;
s16 vit_code_rate_hp;
s16 vit_code_rate_lp;
+ u8 intlv_native;
};
#define FEP2DIB(fep,ch) \
+ (ch)->RF_kHz = (fep)->frequency / 1000; \
(ch)->Bw = (fep)->u.ofdm.bandwidth; \
(ch)->nfft = (fep)->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ? -1 : (fep)->u.ofdm.transmission_mode; \
(ch)->guard = (fep)->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ? -1 : (fep)->u.ofdm.guard_interval; \
(ch)->vit_select_hp = 1; \
(ch)->vit_alpha = 1; \
(ch)->vit_code_rate_hp = (fep)->u.ofdm.code_rate_HP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_HP; \
- (ch)->vit_code_rate_lp = (fep)->u.ofdm.code_rate_LP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_LP;
+ (ch)->vit_code_rate_lp = (fep)->u.ofdm.code_rate_LP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_LP; \
+ (ch)->intlv_native = 1;
#define INIT_OFDM_CHANNEL(ch) do {\
(ch)->Bw = 0; \
printk("pll: %s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n",
desc->name, div, buf[0], buf[1], buf[2], buf[3]);
- return 0;
+ // calculate the frequency we set it to
+ return (div * desc->entries[i].stepsize) - desc->entries[i].offset;
}
EXPORT_SYMBOL(dvb_pll_configure);
static int dvb_pll_release(struct dvb_frontend *fe)
{
- if (fe->tuner_priv)
- kfree(fe->tuner_priv);
+ kfree(fe->tuner_priv);
fe->tuner_priv = NULL;
return 0;
}
struct dvb_pll_priv *priv = fe->tuner_priv;
u8 buf[4];
struct i2c_msg msg =
- { .addr = priv->pll_i2c_address, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ { .addr = priv->pll_i2c_address, .flags = 0,
+ .buf = buf, .len = sizeof(buf) };
int i;
int result;
return 0;
}
-static int dvb_pll_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int dvb_pll_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
{
struct dvb_pll_priv *priv = fe->tuner_priv;
u8 buf[4];
struct i2c_msg msg =
- { .addr = priv->pll_i2c_address, .flags = 0, .buf = buf, .len = sizeof(buf) };
+ { .addr = priv->pll_i2c_address, .flags = 0,
+ .buf = buf, .len = sizeof(buf) };
int result;
- u32 div;
- int i;
- u32 bandwidth = 0;
+ u32 bandwidth = 0, frequency = 0;
if (priv->i2c == NULL)
return -EINVAL;
bandwidth = params->u.ofdm.bandwidth;
}
- if ((result = dvb_pll_configure(priv->pll_desc, buf, params->frequency, bandwidth)) != 0)
+ if ((result = dvb_pll_configure(priv->pll_desc, buf,
+ params->frequency, bandwidth)) < 0)
return result;
+ else
+ frequency = result;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
return result;
}
- // calculate the frequency we set it to
- for (i = 0; i < priv->pll_desc->count; i++) {
- if (params->frequency > priv->pll_desc->entries[i].limit)
- continue;
- break;
- }
- div = (params->frequency + priv->pll_desc->entries[i].offset) / priv->pll_desc->entries[i].stepsize;
- priv->frequency = (div * priv->pll_desc->entries[i].stepsize) - priv->pll_desc->entries[i].offset;
+ priv->frequency = frequency;
priv->bandwidth = bandwidth;
return 0;
}
-static int dvb_pll_calc_regs(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8 *buf, int buf_len)
+static int dvb_pll_calc_regs(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params,
+ u8 *buf, int buf_len)
{
struct dvb_pll_priv *priv = fe->tuner_priv;
int result;
- u32 div;
- int i;
- u32 bandwidth = 0;
+ u32 bandwidth = 0, frequency = 0;
if (buf_len < 5)
return -EINVAL;
bandwidth = params->u.ofdm.bandwidth;
}
- if ((result = dvb_pll_configure(priv->pll_desc, buf+1, params->frequency, bandwidth)) != 0)
+ if ((result = dvb_pll_configure(priv->pll_desc, buf+1,
+ params->frequency, bandwidth)) < 0)
return result;
+ else
+ frequency = result;
+
buf[0] = priv->pll_i2c_address;
- // calculate the frequency we set it to
- for (i = 0; i < priv->pll_desc->count; i++) {
- if (params->frequency > priv->pll_desc->entries[i].limit)
- continue;
- break;
- }
- div = (params->frequency + priv->pll_desc->entries[i].offset) / priv->pll_desc->entries[i].stepsize;
- priv->frequency = (div * priv->pll_desc->entries[i].stepsize) - priv->pll_desc->entries[i].offset;
+ priv->frequency = frequency;
priv->bandwidth = bandwidth;
return 5;
.get_bandwidth = dvb_pll_get_bandwidth,
};
-struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, struct i2c_adapter *i2c, struct dvb_pll_desc *desc)
+struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
+ struct i2c_adapter *i2c,
+ struct dvb_pll_desc *desc)
{
u8 b1 [] = { 0 };
- struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD, .buf = b1, .len = 1 };
+ struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD,
+ .buf = b1, .len = 1 };
struct dvb_pll_priv *priv = NULL;
int ret;
priv->i2c = i2c;
priv->pll_desc = desc;
- memcpy(&fe->ops.tuner_ops, &dvb_pll_tuner_ops, sizeof(struct dvb_tuner_ops));
+ memcpy(&fe->ops.tuner_ops, &dvb_pll_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
strncpy(fe->ops.tuner_ops.info.name, desc->name, 128);
fe->ops.tuner_ops.info.frequency_min = desc->min;
fe->ops.tuner_ops.info.frequency_min = desc->max;
extern struct dvb_pll_desc dvb_pll_thomson_fe6600;
extern int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
- u32 freq, int bandwidth);
+ u32 freq, int bandwidth);
/**
* Attach a dvb-pll to the supplied frontend structure.
* @param desc dvb_pll_desc to use.
* @return Frontend pointer on success, NULL on failure
*/
-extern struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, struct i2c_adapter *i2c, struct dvb_pll_desc *desc);
+extern struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe,
+ int pll_addr,
+ struct i2c_adapter *i2c,
+ struct dvb_pll_desc *desc);
#endif
+++ /dev/null
-/*
- * lg_h06xf.h - ATSC Tuner support for LG TDVS-H06xF
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _LG_H06XF_H_
-#define _LG_H06XF_H_
-#include "dvb-pll.h"
-
-static int lg_h06xf_pll_set(struct dvb_frontend* fe, struct i2c_adapter* i2c_adap,
- struct dvb_frontend_parameters* params)
-{
- u8 buf[4];
- struct i2c_msg msg = { .addr = 0x61, .flags = 0,
- .buf = buf, .len = sizeof(buf) };
- int err;
-
- dvb_pll_configure(&dvb_pll_lg_tdvs_h06xf, buf, params->frequency, 0);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if ((err = i2c_transfer(i2c_adap, &msg, 1)) != 1) {
- printk(KERN_WARNING "lg_h06xf: %s error "
- "(addr %02x <- %02x, err = %i)\n",
- __FUNCTION__, buf[0], buf[1], err);
- if (err < 0)
- return err;
- else
- return -EREMOTEIO;
- }
-
- /* Set the Auxiliary Byte. */
- buf[0] = buf[2];
- buf[0] &= ~0x20;
- buf[0] |= 0x18;
- buf[1] = 0x50;
- msg.len = 2;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if ((err = i2c_transfer(i2c_adap, &msg, 1)) != 1) {
- printk(KERN_WARNING "lg_h06xf: %s error "
- "(addr %02x <- %02x, err = %i)\n",
- __FUNCTION__, buf[0], buf[1], err);
- if (err < 0)
- return err;
- else
- return -EREMOTEIO;
- }
-
- return 0;
-}
-#endif
* Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
* pcHDTV HD5500
*
- * TODO:
- * signal strength always returns 0.
- *
*/
#include <linux/kernel.h>
#include <asm/byteorder.h>
#include "dvb_frontend.h"
+#include "dvb_math.h"
#include "lgdt330x_priv.h"
#include "lgdt330x.h"
+/* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */
+/* #define USE_EQMSE */
+
static int debug = 0;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off).");
/* Demodulator private data */
fe_modulation_t current_modulation;
+ u32 snr; /* Result of last SNR calculation */
/* Tuner private data */
u32 current_frequency;
static u8 lgdt3303_8vsb_44_data[] = {
0x04, 0x00,
0x0d, 0x40,
- 0x0e, 0x87,
- 0x0f, 0x8e,
- 0x10, 0x01,
- 0x47, 0x8b };
+ 0x0e, 0x87,
+ 0x0f, 0x8e,
+ 0x10, 0x01,
+ 0x47, 0x8b };
/*
* Array of byte pairs <address, value>
/* Test signal does not exist flag */
/* as well as the AGC lock flag. */
*status |= FE_HAS_SIGNAL;
- } else {
- /* Without a signal all other status bits are meaningless */
- return 0;
}
/*
/* Test input signal does not exist flag */
/* as well as the AGC lock flag. */
*status |= FE_HAS_SIGNAL;
- } else {
- /* Without a signal all other status bits are meaningless */
- return 0;
}
/* Carrier Recovery Lock Status Register */
return 0;
}
-static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+/* Calculate SNR estimation (scaled by 2^24)
+
+ 8-VSB SNR equations from LGDT3302 and LGDT3303 datasheets, QAM
+ equations from LGDT3303 datasheet. VSB is the same between the '02
+ and '03, so maybe QAM is too? Perhaps someone with a newer datasheet
+ that has QAM information could verify?
+
+ For 8-VSB: (two ways, take your pick)
+ LGDT3302:
+ SNR_EQ = 10 * log10(25 * 24^2 / EQ_MSE)
+ LGDT3303:
+ SNR_EQ = 10 * log10(25 * 32^2 / EQ_MSE)
+ LGDT3302 & LGDT3303:
+ SNR_PT = 10 * log10(25 * 32^2 / PT_MSE) (we use this one)
+ For 64-QAM:
+ SNR = 10 * log10( 688128 / MSEQAM)
+ For 256-QAM:
+ SNR = 10 * log10( 696320 / MSEQAM)
+
+ We re-write the snr equation as:
+ SNR * 2^24 = 10*(c - intlog10(MSE))
+ Where for 256-QAM, c = log10(696320) * 2^24, and so on. */
+
+static u32 calculate_snr(u32 mse, u32 c)
{
- /* not directly available. */
- *strength = 0;
- return 0;
+ if (mse == 0) /* No signal */
+ return 0;
+
+ mse = intlog10(mse);
+ if (mse > c) {
+ /* Negative SNR, which is possible, but realisticly the
+ demod will lose lock before the signal gets this bad. The
+ API only allows for unsigned values, so just return 0 */
+ return 0;
+ }
+ return 10*(c - mse);
}
static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr)
{
-#ifdef SNR_IN_DB
- /*
- * Spec sheet shows formula for SNR_EQ = 10 log10(25 * 24**2 / noise)
- * and SNR_PH = 10 log10(25 * 32**2 / noise) for equalizer and phase tracker
- * respectively. The following tables are built on these formulas.
- * The usual definition is SNR = 20 log10(signal/noise)
- * If the specification is wrong the value retuned is 1/2 the actual SNR in db.
- *
- * This table is a an ordered list of noise values computed by the
- * formula from the spec sheet such that the index into the table
- * starting at 43 or 45 is the SNR value in db. There are duplicate noise
- * value entries at the beginning because the SNR varies more than
- * 1 db for a change of 1 digit in noise at very small values of noise.
- *
- * Examples from SNR_EQ table:
- * noise SNR
- * 0 43
- * 1 42
- * 2 39
- * 3 37
- * 4 36
- * 5 35
- * 6 34
- * 7 33
- * 8 33
- * 9 32
- * 10 32
- * 11 31
- * 12 31
- * 13 30
- */
-
- static const u32 SNR_EQ[] =
- { 1, 2, 2, 2, 3, 3, 4, 4, 5, 7,
- 9, 11, 13, 17, 21, 26, 33, 41, 52, 65,
- 81, 102, 129, 162, 204, 257, 323, 406, 511, 644,
- 810, 1020, 1284, 1616, 2035, 2561, 3224, 4059, 5110, 6433,
- 8098, 10195, 12835, 16158, 20341, 25608, 32238, 40585, 51094, 64323,
- 80978, 101945, 128341, 161571, 203406, 256073, 0x40000
- };
-
- static const u32 SNR_PH[] =
- { 1, 2, 2, 2, 3, 3, 4, 5, 6, 8,
- 10, 12, 15, 19, 23, 29, 37, 46, 58, 73,
- 91, 115, 144, 182, 229, 288, 362, 456, 574, 722,
- 909, 1144, 1440, 1813, 2282, 2873, 3617, 4553, 5732, 7216,
- 9084, 11436, 14396, 18124, 22817, 28724, 36161, 45524, 57312, 72151,
- 90833, 114351, 143960, 181235, 228161, 0x080000
- };
-
- static u8 buf[5];/* read data buffer */
- static u32 noise; /* noise value */
- static u32 snr_db; /* index into SNR_EQ[] */
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
+ u8 buf[5]; /* read data buffer */
+ u32 noise; /* noise value */
+ u32 c; /* per-modulation SNR calculation constant */
- /* read both equalizer and phase tracker noise data */
- i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
-
- if (state->current_modulation == VSB_8) {
- /* Equalizer Mean-Square Error Register for VSB */
+ switch(state->current_modulation) {
+ case VSB_8:
+ i2c_read_demod_bytes(state, LGDT3302_EQPH_ERR0, buf, 5);
+#ifdef USE_EQMSE
+ /* Use Equalizer Mean-Square Error Register */
+ /* SNR for ranges from -15.61 to +41.58 */
noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
-
- /*
- * Look up noise value in table.
- * A better search algorithm could be used...
- * watch out there are duplicate entries.
- */
- for (snr_db = 0; snr_db < sizeof(SNR_EQ); snr_db++) {
- if (noise < SNR_EQ[snr_db]) {
- *snr = 43 - snr_db;
- break;
- }
- }
- } else {
- /* Phase Tracker Mean-Square Error Register for QAM */
- noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
-
- /* Look up noise value in table. */
- for (snr_db = 0; snr_db < sizeof(SNR_PH); snr_db++) {
- if (noise < SNR_PH[snr_db]) {
- *snr = 45 - snr_db;
- break;
- }
- }
- }
+ c = 69765745; /* log10(25*24^2)*2^24 */
#else
- /* Return the raw noise value */
- static u8 buf[5];/* read data buffer */
- static u32 noise; /* noise value */
- struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
-
- /* read both equalizer and pase tracker noise data */
- i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
-
- if (state->current_modulation == VSB_8) {
- /* Phase Tracker Mean-Square Error Register for VSB */
+ /* Use Phase Tracker Mean-Square Error Register */
+ /* SNR for ranges from -13.11 to +44.08 */
noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
- } else {
-
- /* Carrier Recovery Mean-Square Error for QAM */
- i2c_read_demod_bytes(state, 0x1a, buf, 2);
+ c = 73957994; /* log10(25*32^2)*2^24 */
+#endif
+ break;
+ case QAM_64:
+ case QAM_256:
+ i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
noise = ((buf[0] & 3) << 8) | buf[1];
+ c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
+ /* log10(688128)*2^24 and log10(696320)*2^24 */
+ break;
+ default:
+ printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
+ __FUNCTION__);
+ return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
}
- /* Small values for noise mean signal is better so invert noise */
- *snr = ~noise;
-#endif
+ state->snr = calculate_snr(noise, c);
+ *snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
- dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
+ dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise,
+ state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
return 0;
}
static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr)
{
- /* Return the raw noise value */
- static u8 buf[5];/* read data buffer */
- static u32 noise; /* noise value */
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
+ u8 buf[5]; /* read data buffer */
+ u32 noise; /* noise value */
+ u32 c; /* per-modulation SNR calculation constant */
- if (state->current_modulation == VSB_8) {
-
- i2c_read_demod_bytes(state, 0x6e, buf, 5);
- /* Phase Tracker Mean-Square Error Register for VSB */
+ switch(state->current_modulation) {
+ case VSB_8:
+ i2c_read_demod_bytes(state, LGDT3303_EQPH_ERR0, buf, 5);
+#ifdef USE_EQMSE
+ /* Use Equalizer Mean-Square Error Register */
+ /* SNR for ranges from -16.12 to +44.08 */
+ noise = ((buf[0] & 0x78) << 13) | (buf[1] << 8) | buf[2];
+ c = 73957994; /* log10(25*32^2)*2^24 */
+#else
+ /* Use Phase Tracker Mean-Square Error Register */
+ /* SNR for ranges from -13.11 to +44.08 */
noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4];
- } else {
-
- /* Carrier Recovery Mean-Square Error for QAM */
- i2c_read_demod_bytes(state, 0x1a, buf, 2);
+ c = 73957994; /* log10(25*32^2)*2^24 */
+#endif
+ break;
+ case QAM_64:
+ case QAM_256:
+ i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
noise = (buf[0] << 8) | buf[1];
+ c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
+ /* log10(688128)*2^24 and log10(696320)*2^24 */
+ break;
+ default:
+ printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
+ __FUNCTION__);
+ return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
}
- /* Small values for noise mean signal is better so invert noise */
- *snr = ~noise;
+ state->snr = calculate_snr(noise, c);
+ *snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
+
+ dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise,
+ state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
+
+ return 0;
+}
+
+static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+{
+ /* Calculate Strength from SNR up to 35dB */
+ /* Even though the SNR can go higher than 35dB, there is some comfort */
+ /* factor in having a range of strong signals that can show at 100% */
+ struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
+ u16 snr;
+ int ret;
- dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
+ ret = fe->ops.read_snr(fe, &snr);
+ if (ret != 0)
+ return ret;
+ /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
+ /* scale the range 0 - 35*2^24 into 0 - 65535 */
+ if (state->snr >= 8960 * 0x10000)
+ *strength = 0xffff;
+ else
+ *strength = state->snr / 8960;
return 0;
}
AGC_RFIF_ACC2= 0x3b,
AGC_STATUS= 0x3f,
SYNC_STATUS_VSB= 0x43,
- EQPH_ERR0= 0x47,
- EQ_ERR1= 0x48,
- EQ_ERR2= 0x49,
- PH_ERR1= 0x4a,
- PH_ERR2= 0x4b,
DEMUX_CONTROL= 0x66,
+ LGDT3302_EQPH_ERR0= 0x47,
+ LGDT3302_EQ_ERR1= 0x48,
+ LGDT3302_EQ_ERR2= 0x49,
+ LGDT3302_PH_ERR1= 0x4a,
+ LGDT3302_PH_ERR2= 0x4b,
LGDT3302_PACKET_ERR_COUNTER1= 0x6a,
LGDT3302_PACKET_ERR_COUNTER2= 0x6b,
+ LGDT3303_EQPH_ERR0= 0x6e,
+ LGDT3303_EQ_ERR1= 0x6f,
+ LGDT3303_EQ_ERR2= 0x70,
+ LGDT3303_PH_ERR1= 0x71,
+ LGDT3303_PH_ERR2= 0x72,
LGDT3303_PACKET_ERR_COUNTER1= 0x8b,
LGDT3303_PACKET_ERR_COUNTER2= 0x8c,
};
--- /dev/null
+/*
+ * lgh06xf.c - ATSC Tuner support for LG TDVS-H06xF
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dvb-pll.h"
+#include "lgh06xf.h"
+
+#define LG_H06XF_PLL_I2C_ADDR 0x61
+
+struct lgh06xf_priv {
+ struct i2c_adapter *i2c;
+ u32 frequency;
+};
+
+static int lgh06xf_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static int lgh06xf_set_params(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters* params)
+{
+ struct lgh06xf_priv *priv = fe->tuner_priv;
+ u8 buf[4];
+ struct i2c_msg msg = { .addr = LG_H06XF_PLL_I2C_ADDR, .flags = 0,
+ .buf = buf, .len = sizeof(buf) };
+ u32 frequency;
+ int result;
+
+ if ((result = dvb_pll_configure(&dvb_pll_lg_tdvs_h06xf, buf,
+ params->frequency, 0)) < 0)
+ return result;
+ else
+ frequency = result;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
+ printk(KERN_WARNING "lgh06xf: %s error "
+ "(addr %02x <- %02x, result = %i)\n",
+ __FUNCTION__, buf[0], buf[1], result);
+ if (result < 0)
+ return result;
+ else
+ return -EREMOTEIO;
+ }
+
+ /* Set the Auxiliary Byte. */
+ buf[0] = buf[2];
+ buf[0] &= ~0x20;
+ buf[0] |= 0x18;
+ buf[1] = 0x50;
+ msg.len = 2;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
+ printk(KERN_WARNING "lgh06xf: %s error "
+ "(addr %02x <- %02x, result = %i)\n",
+ __FUNCTION__, buf[0], buf[1], result);
+ if (result < 0)
+ return result;
+ else
+ return -EREMOTEIO;
+ }
+
+ priv->frequency = frequency;
+
+ return 0;
+}
+
+static int lgh06xf_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct lgh06xf_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static struct dvb_tuner_ops lgh06xf_tuner_ops = {
+ .release = lgh06xf_release,
+ .set_params = lgh06xf_set_params,
+ .get_frequency = lgh06xf_get_frequency,
+};
+
+struct dvb_frontend* lgh06xf_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c)
+{
+ struct lgh06xf_priv *priv = NULL;
+
+ priv = kzalloc(sizeof(struct lgh06xf_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->i2c = i2c;
+
+ memcpy(&fe->ops.tuner_ops, &lgh06xf_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ strlcpy(fe->ops.tuner_ops.info.name, dvb_pll_lg_tdvs_h06xf.name,
+ sizeof(fe->ops.tuner_ops.info.name));
+
+ fe->ops.tuner_ops.info.frequency_min = dvb_pll_lg_tdvs_h06xf.min;
+ fe->ops.tuner_ops.info.frequency_max = dvb_pll_lg_tdvs_h06xf.max;
+
+ fe->tuner_priv = priv;
+ return fe;
+}
+
+EXPORT_SYMBOL(lgh06xf_attach);
+
+MODULE_DESCRIPTION("LG TDVS-H06xF ATSC Tuner support");
+MODULE_AUTHOR("Michael Krufky");
+MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
--- /dev/null
+/*
+ * lgh06xf.h - ATSC Tuner support for LG TDVS-H06xF
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LGH06XF_H_
+#define _LGH06XF_H_
+#include "dvb_frontend.h"
+
+#if defined(CONFIG_DVB_TUNER_LGH06XF) || (defined(CONFIG_DVB_TUNER_LGH06XF_MODULE) && defined(MODULE))
+extern struct dvb_frontend* lgh06xf_attach(struct dvb_frontend* fe,
+ struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend* lgh06xf_attach(struct dvb_frontend* fe,
+ struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_TUNER_LGH06XF */
+
+#endif /* _LGH06XF_H_ */
#include <linux/slab.h>
#include <asm/byteorder.h>
+#include "dvb_math.h"
#include "dvb_frontend.h"
#include "dvb-pll.h"
#include "or51132.h"
/* Demodulator private data */
fe_modulation_t current_modulation;
+ u32 snr; /* Result of last SNR calculation */
/* Tuner private data */
u32 current_frequency;
return 0;
}
-/* log10-1 table at .5 increments from 1 to 100.5 */
-static unsigned int i100x20log10[] = {
- 0, 352, 602, 795, 954, 1088, 1204, 1306, 1397, 1480,
- 1556, 1625, 1690, 1750, 1806, 1858, 1908, 1955, 2000, 2042,
- 2082, 2121, 2158, 2193, 2227, 2260, 2292, 2322, 2352, 2380,
- 2408, 2434, 2460, 2486, 2510, 2534, 2557, 2580, 2602, 2623,
- 2644, 2664, 2684, 2704, 2723, 2742, 2760, 2778, 2795, 2813,
- 2829, 2846, 2862, 2878, 2894, 2909, 2924, 2939, 2954, 2968,
- 2982, 2996, 3010, 3023, 3037, 3050, 3062, 3075, 3088, 3100,
- 3112, 3124, 3136, 3148, 3159, 3170, 3182, 3193, 3204, 3214,
- 3225, 3236, 3246, 3256, 3266, 3276, 3286, 3296, 3306, 3316,
- 3325, 3334, 3344, 3353, 3362, 3371, 3380, 3389, 3397, 3406,
- 3415, 3423, 3432, 3440, 3448, 3456, 3464, 3472, 3480, 3488,
- 3496, 3504, 3511, 3519, 3526, 3534, 3541, 3549, 3556, 3563,
- 3570, 3577, 3584, 3591, 3598, 3605, 3612, 3619, 3625, 3632,
- 3639, 3645, 3652, 3658, 3665, 3671, 3677, 3683, 3690, 3696,
- 3702, 3708, 3714, 3720, 3726, 3732, 3738, 3744, 3750, 3755,
- 3761, 3767, 3772, 3778, 3784, 3789, 3795, 3800, 3806, 3811,
- 3816, 3822, 3827, 3832, 3838, 3843, 3848, 3853, 3858, 3863,
- 3868, 3874, 3879, 3884, 3888, 3893, 3898, 3903, 3908, 3913,
- 3918, 3922, 3927, 3932, 3936, 3941, 3946, 3950, 3955, 3960,
- 3964, 3969, 3973, 3978, 3982, 3986, 3991, 3995, 4000, 4004,
-};
+/* Calculate SNR estimation (scaled by 2^24)
-static unsigned int denom[] = {1,1,100,1000,10000,100000,1000000,10000000,100000000};
+ 8-VSB SNR and QAM equations from Oren datasheets
-static unsigned int i20Log10(unsigned short val)
-{
- unsigned int rntval = 100;
- unsigned int tmp = val;
- unsigned int exp = 1;
+ For 8-VSB:
+ SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) - K
+
+ Where K = 0 if NTSC rejection filter is OFF; and
+ K = 3 if NTSC rejection filter is ON
+
+ For QAM64:
+ SNR[dB] = 10 * log10(897152044.8282 / MSE^2 )
- while(tmp > 100) {tmp /= 100; exp++;}
+ For QAM256:
+ SNR[dB] = 10 * log10(907832426.314266 / MSE^2 )
- val = (2 * val)/denom[exp];
- if (exp > 1) rntval = 2000*exp;
+ We re-write the snr equation as:
+ SNR * 2^24 = 10*(c - 2*intlog10(MSE))
+ Where for QAM256, c = log10(907832426.314266) * 2^24
+ and for 8-VSB and QAM64, c = log10(897152044.8282) * 2^24 */
- rntval += i100x20log10[val];
- return rntval;
+static u32 calculate_snr(u32 mse, u32 c)
+{
+ if (mse == 0) /* No signal */
+ return 0;
+
+ mse = 2*intlog10(mse);
+ if (mse > c) {
+ /* Negative SNR, which is possible, but realisticly the
+ demod will lose lock before the signal gets this bad. The
+ API only allows for unsigned values, so just return 0 */
+ return 0;
+ }
+ return 10*(c - mse);
}
-static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
{
struct or51132_state* state = fe->demodulator_priv;
- unsigned char rec_buf[2];
- unsigned char snd_buf[2];
- u8 rcvr_stat;
- u16 snr_equ;
- u32 signal_strength;
- int usK;
+ u8 rec_buf[2];
+ u8 snd_buf[2];
+ u32 noise;
+ u32 c;
+ u32 usK;
+ /* Register is same for VSB or QAM firmware */
snd_buf[0]=0x04;
snd_buf[1]=0x02; /* SNR after Equalizer */
msleep(30); /* 30ms */
if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
- printk(KERN_WARNING "or51132: read_status write error\n");
- return -1;
+ printk(KERN_WARNING "or51132: snr write error\n");
+ return -EREMOTEIO;
}
msleep(30); /* 30ms */
if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
- printk(KERN_WARNING "or51132: read_status read error\n");
- return -1;
+ printk(KERN_WARNING "or51132: snr read error\n");
+ return -EREMOTEIO;
}
- snr_equ = rec_buf[0] | (rec_buf[1] << 8);
- dprintk("read_signal_strength snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ);
+ noise = rec_buf[0] | (rec_buf[1] << 8);
+ dprintk("read_snr noise %x %x (%i)\n",rec_buf[0],rec_buf[1],noise);
- /* Receiver Status */
+ /* Read status, contains modulation type for QAM_AUTO and
+ NTSC filter for VSB */
snd_buf[0]=0x04;
- snd_buf[1]=0x00;
+ snd_buf[1]=0x00; /* Status register */
msleep(30); /* 30ms */
if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
- printk(KERN_WARNING "or51132: read_signal_strength read_status write error\n");
- return -1;
+ printk(KERN_WARNING "or51132: status write error\n");
+ return -EREMOTEIO;
}
msleep(30); /* 30ms */
if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
- printk(KERN_WARNING "or51132: read_signal_strength read_status read error\n");
- return -1;
+ printk(KERN_WARNING "or51132: status read error\n");
+ return -EREMOTEIO;
}
- dprintk("read_signal_strength read_status %x %x\n",rec_buf[0],rec_buf[1]);
- rcvr_stat = rec_buf[1];
- usK = (rcvr_stat & 0x10) ? 3 : 0;
- /* The value reported back from the frontend will be FFFF=100% 0000=0% */
- signal_strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000;
- if (signal_strength > 0xffff)
- *strength = 0xffff;
- else
- *strength = signal_strength;
- dprintk("read_signal_strength %i\n",*strength);
+ usK = 0;
+ switch (rec_buf[0]) {
+ case 0x06:
+ usK = (rec_buf[1] & 0x10) ? 0x03000000 : 0;
+ /* Fall through to QAM64 case */
+ case 0x43:
+ c = 150204167;
+ break;
+ case 0x45:
+ c = 150290396;
+ break;
+ default:
+ printk(KERN_ERR "or51132: unknown status 0x%02x\n", rec_buf[0]);
+ return -EREMOTEIO;
+ }
+ dprintk("%s: modulation %02x, NTSC rej O%s\n", __FUNCTION__,
+ rec_buf[0], rec_buf[1]&0x10?"n":"ff");
+
+ /* Calculate SNR using noise, c, and NTSC rejection correction */
+ state->snr = calculate_snr(noise, c) - usK;
+ *snr = (state->snr) >> 16;
+
+ dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise,
+ state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
return 0;
}
-static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
+static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct or51132_state* state = fe->demodulator_priv;
- unsigned char rec_buf[2];
- unsigned char snd_buf[2];
- u16 snr_equ;
-
- snd_buf[0]=0x04;
- snd_buf[1]=0x02; /* SNR after Equalizer */
- msleep(30); /* 30ms */
- if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
- printk(KERN_WARNING "or51132: read_snr write error\n");
- return -1;
- }
- msleep(30); /* 30ms */
- if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
- printk(KERN_WARNING "or51132: read_snr dvr read error\n");
- return -1;
- }
- snr_equ = rec_buf[0] | (rec_buf[1] << 8);
- dprintk("read_snr snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ);
+ /* Calculate Strength from SNR up to 35dB */
+ /* Even though the SNR can go higher than 35dB, there is some comfort */
+ /* factor in having a range of strong signals that can show at 100% */
+ struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+ u16 snr;
+ int ret;
- *snr = 0xFFFF - snr_equ;
- dprintk("read_snr %i\n",*snr);
+ ret = fe->ops.read_snr(fe, &snr);
+ if (ret != 0)
+ return ret;
+ /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
+ /* scale the range 0 - 35*2^24 into 0 - 65535 */
+ if (state->snr >= 8960 * 0x10000)
+ *strength = 0xffff;
+ else
+ *strength = state->snr / 8960;
return 0;
}
#include <linux/slab.h>
#include <asm/byteorder.h>
+#include "dvb_math.h"
#include "dvb_frontend.h"
#include "or51211.h"
/* Demodulator private data */
u8 initialized:1;
+ u32 snr; /* Result of last SNR claculation */
/* Tuner private data */
u32 current_frequency;
return 0;
}
-/* log10-1 table at .5 increments from 1 to 100.5 */
-static unsigned int i100x20log10[] = {
- 0, 352, 602, 795, 954, 1088, 1204, 1306, 1397, 1480,
- 1556, 1625, 1690, 1750, 1806, 1858, 1908, 1955, 2000, 2042,
- 2082, 2121, 2158, 2193, 2227, 2260, 2292, 2322, 2352, 2380,
- 2408, 2434, 2460, 2486, 2510, 2534, 2557, 2580, 2602, 2623,
- 2644, 2664, 2684, 2704, 2723, 2742, 2760, 2778, 2795, 2813,
- 2829, 2846, 2862, 2878, 2894, 2909, 2924, 2939, 2954, 2968,
- 2982, 2996, 3010, 3023, 3037, 3050, 3062, 3075, 3088, 3100,
- 3112, 3124, 3136, 3148, 3159, 3170, 3182, 3193, 3204, 3214,
- 3225, 3236, 3246, 3256, 3266, 3276, 3286, 3296, 3306, 3316,
- 3325, 3334, 3344, 3353, 3362, 3371, 3380, 3389, 3397, 3406,
- 3415, 3423, 3432, 3440, 3448, 3456, 3464, 3472, 3480, 3488,
- 3496, 3504, 3511, 3519, 3526, 3534, 3541, 3549, 3556, 3563,
- 3570, 3577, 3584, 3591, 3598, 3605, 3612, 3619, 3625, 3632,
- 3639, 3645, 3652, 3658, 3665, 3671, 3677, 3683, 3690, 3696,
- 3702, 3708, 3714, 3720, 3726, 3732, 3738, 3744, 3750, 3755,
- 3761, 3767, 3772, 3778, 3784, 3789, 3795, 3800, 3806, 3811,
- 3816, 3822, 3827, 3832, 3838, 3843, 3848, 3853, 3858, 3863,
- 3868, 3874, 3879, 3884, 3888, 3893, 3898, 3903, 3908, 3913,
- 3918, 3922, 3927, 3932, 3936, 3941, 3946, 3950, 3955, 3960,
- 3964, 3969, 3973, 3978, 3982, 3986, 3991, 3995, 4000, 4004,
-};
-
-static unsigned int denom[] = {1,1,100,1000,10000,100000,1000000,10000000,100000000};
+/* Calculate SNR estimation (scaled by 2^24)
-static unsigned int i20Log10(unsigned short val)
-{
- unsigned int rntval = 100;
- unsigned int tmp = val;
- unsigned int exp = 1;
+ 8-VSB SNR equation from Oren datasheets
- while(tmp > 100) {tmp /= 100; exp++;}
+ For 8-VSB:
+ SNR[dB] = 10 * log10(219037.9454 / MSE^2 )
- val = (2 * val)/denom[exp];
- if (exp > 1) rntval = 2000*exp;
+ We re-write the snr equation as:
+ SNR * 2^24 = 10*(c - 2*intlog10(MSE))
+ Where for 8-VSB, c = log10(219037.9454) * 2^24 */
- rntval += i100x20log10[val];
- return rntval;
+static u32 calculate_snr(u32 mse, u32 c)
+{
+ if (mse == 0) /* No signal */
+ return 0;
+
+ mse = 2*intlog10(mse);
+ if (mse > c) {
+ /* Negative SNR, which is possible, but realisticly the
+ demod will lose lock before the signal gets this bad. The
+ API only allows for unsigned values, so just return 0 */
+ return 0;
+ }
+ return 10*(c - mse);
}
-static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
{
struct or51211_state* state = fe->demodulator_priv;
u8 rec_buf[2];
- u8 snd_buf[4];
- u8 snr_equ;
- u32 signal_strength;
+ u8 snd_buf[3];
/* SNR after Equalizer */
snd_buf[0] = 0x04;
snd_buf[1] = 0x00;
snd_buf[2] = 0x04;
- snd_buf[3] = 0x00;
if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
- printk(KERN_WARNING "or51211: read_status write error\n");
+ printk(KERN_WARNING "%s: error writing snr reg\n",
+ __FUNCTION__);
return -1;
}
- msleep(3);
if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
- printk(KERN_WARNING "or51211: read_status read error\n");
+ printk(KERN_WARNING "%s: read_status read error\n",
+ __FUNCTION__);
return -1;
}
- snr_equ = rec_buf[0] & 0xff;
- /* The value reported back from the frontend will be FFFF=100% 0000=0% */
- signal_strength = (((5334 - i20Log10(snr_equ))/3+5)*65535)/1000;
- if (signal_strength > 0xffff)
- *strength = 0xffff;
- else
- *strength = signal_strength;
- dprintk("read_signal_strength %i\n",*strength);
+ state->snr = calculate_snr(rec_buf[0], 89599047);
+ *snr = (state->snr) >> 16;
+
+ dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __FUNCTION__, rec_buf[0],
+ state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
return 0;
}
-static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
+static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct or51211_state* state = fe->demodulator_priv;
- u8 rec_buf[2];
- u8 snd_buf[4];
-
- /* SNR after Equalizer */
- snd_buf[0] = 0x04;
- snd_buf[1] = 0x00;
- snd_buf[2] = 0x04;
- snd_buf[3] = 0x00;
-
- if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
- printk(KERN_WARNING "or51211: read_status write error\n");
- return -1;
- }
- msleep(3);
- if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
- printk(KERN_WARNING "or51211: read_status read error\n");
- return -1;
- }
- *snr = rec_buf[0] & 0xff;
-
- dprintk("read_snr %i\n",*snr);
+ /* Calculate Strength from SNR up to 35dB */
+ /* Even though the SNR can go higher than 35dB, there is some comfort */
+ /* factor in having a range of strong signals that can show at 100% */
+ struct or51211_state* state = (struct or51211_state*)fe->demodulator_priv;
+ u16 snr;
+ int ret;
+
+ ret = fe->ops.read_snr(fe, &snr);
+ if (ret != 0)
+ return ret;
+ /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
+ /* scale the range 0 - 35*2^24 into 0 - 65535 */
+ if (state->snr >= 8960 * 0x10000)
+ *strength = 0xffff;
+ else
+ *strength = state->snr / 8960;
return 0;
}
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities
break;
- case TDA10046_AGC_TDA827X:
+ case TDA10046_AGC_TDA827X_GP11:
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
break;
- case TDA10046_AGC_TDA827X_GPL:
+ case TDA10046_AGC_TDA827X_GP00:
tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
break;
+ case TDA10046_AGC_TDA827X_GP01:
+ tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup
+ tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold
+ tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+ tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x62); // set AGC polarities
+ break;
}
tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
TDA10046_AGC_DEFAULT, /* original configuration */
TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */
TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */
- TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */
- TDA10046_AGC_TDA827X_GPL, /* same as above, but GPIOs 0 */
+ TDA10046_AGC_TDA827X_GP11, /* IF AGC only, special setup for tda827x */
+ TDA10046_AGC_TDA827X_GP00, /* same as above, but GPIOs 0 */
+ TDA10046_AGC_TDA827X_GP01, /* same as above, but GPIO3=0 GPIO1=1*/
};
enum tda10046_if {
if (sync & 0x10)
*status |= FE_HAS_SYNC;
+ if (sync & 0x20) /* frontend can not lock */
+ *status |= FE_TIMEDOUT;
+
if ((sync & 0x1f) == 0x1f)
*status |= FE_HAS_LOCK;
return 0;
}
+static int tda8083_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ struct tda8083_state* state = fe->demodulator_priv;
+ int ret;
+ u8 buf[3];
+
+ if ((ret = tda8083_readregs(state, 0x0b, buf, sizeof(buf))))
+ return ret;
+
+ *ber = ((buf[0] & 0x1f) << 16) | (buf[1] << 8) | buf[2];
+
+ return 0;
+}
+
static int tda8083_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
struct tda8083_state* state = fe->demodulator_priv;
return 0;
}
+static int tda8083_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+ struct tda8083_state* state = fe->demodulator_priv;
+
+ *ucblocks = tda8083_readreg(state, 0x0f);
+ if (*ucblocks == 0xff)
+ *ucblocks = 0xffffffff;
+
+ return 0;
+}
+
static int tda8083_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
struct tda8083_state* state = fe->demodulator_priv;
.read_status = tda8083_read_status,
.read_signal_strength = tda8083_read_signal_strength,
.read_snr = tda8083_read_snr,
+ .read_ber = tda8083_read_ber,
+ .read_ucblocks = tda8083_read_ucblocks,
.diseqc_send_master_cmd = tda8083_send_diseqc_msg,
.diseqc_send_burst = tda8083_diseqc_send_burst,
static int tda826x_release(struct dvb_frontend *fe)
{
- if (fe->tuner_priv)
- kfree(fe->tuner_priv);
+ kfree(fe->tuner_priv);
fe->tuner_priv = NULL;
return 0;
}
{
struct tda826x_priv *priv = NULL;
u8 b1 [] = { 0, 0 };
- struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 };
+ struct i2c_msg msg[2] = {
+ { .addr = addr, .flags = 0, .buf = NULL, .len = 0 },
+ { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 }
+ };
int ret;
dprintk("%s:\n", __FUNCTION__);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- ret = i2c_transfer (i2c, &msg, 1);
+ ret = i2c_transfer (i2c, msg, 2);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
- if (ret != 1)
+ if (ret != 2)
return NULL;
if (!(b1[1] & 0x80))
return NULL;
static int tua6100_release(struct dvb_frontend *fe)
{
- if (fe->tuner_priv)
- kfree(fe->tuner_priv);
+ kfree(fe->tuner_priv);
fe->tuner_priv = NULL;
return 0;
}
/* dvb */
ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE, &pdev->dev);
if (ret < 0)
- goto err_i2c_bit_del_bus;
+ goto err_i2c_del_adapter;
dvb_adapter = &pluto->dvb_adapter;
dvb_dmx_release(dvbdemux);
err_dvb_unregister_adapter:
dvb_unregister_adapter(dvb_adapter);
-err_i2c_bit_del_bus:
- i2c_bit_del_bus(&pluto->i2c_adap);
+err_i2c_del_adapter:
+ i2c_del_adapter(&pluto->i2c_adap);
err_pluto_hw_exit:
pluto_hw_exit(pluto);
err_free_irq:
dvb_dmxdev_release(&pluto->dmxdev);
dvb_dmx_release(dvbdemux);
dvb_unregister_adapter(dvb_adapter);
- i2c_bit_del_bus(&pluto->i2c_adap);
+ i2c_del_adapter(&pluto->i2c_adap);
pluto_hw_exit(pluto);
free_irq(pdev->irq, pluto);
pci_iounmap(pdev, pluto->io_mem);
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+ select VIDEO_IR
help
Support for simple SAA7146 based DVB cards
(so called Budget- or Nova-PCI cards) without onboard
static struct saa7146_extension av7110_extension = {
.name = "dvb",
- .flags = SAA7146_I2C_SHORT_DELAY,
+ .flags = SAA7146_USE_I2C_IRQ,
.module = THIS_MODULE,
.pci_tbl = &pci_tbl[0],
if (!data || !test_bit(data, input_dev->key))
return;
- input_event(input_dev, EV_KEY, data, !!0);
+ input_report_key(input_dev, data, 0);
+ input_sync(input_dev);
}
del_timer(&keyup_timer);
if (keyup_timer.data != keycode || new_toggle != old_toggle) {
delay_timer_finished = 0;
- input_event(input_dev, EV_KEY, keyup_timer.data, !!0);
- input_event(input_dev, EV_KEY, keycode, !0);
- } else
- if (delay_timer_finished)
- input_event(input_dev, EV_KEY, keycode, 2);
+ input_event(input_dev, EV_KEY, keyup_timer.data, 0);
+ input_event(input_dev, EV_KEY, keycode, 1);
+ input_sync(input_dev);
+ } else if (delay_timer_finished) {
+ input_event(input_dev, EV_KEY, keycode, 2);
+ input_sync(input_dev);
+ }
} else {
delay_timer_finished = 0;
- input_event(input_dev, EV_KEY, keycode, !0);
+ input_event(input_dev, EV_KEY, keycode, 1);
+ input_sync(input_dev);
}
keyup_timer.expires = jiffies + UP_TIMEOUT;
int __devinit av7110_ir_init(struct av7110 *av7110)
{
static struct proc_dir_entry *e;
+ int err;
if (av_cnt >= sizeof av_list/sizeof av_list[0])
return -ENOSPC;
set_bit(EV_KEY, input_dev->evbit);
set_bit(EV_REP, input_dev->evbit);
input_register_keys();
- input_register_device(input_dev);
+ err = input_register_device(input_dev);
+ if (err) {
+ input_free_device(input_dev);
+ return err;
+ }
input_dev->timer.function = input_repeat_key;
e = create_proc_entry("av7110_ir", S_IFREG | S_IRUGO | S_IWUSR, NULL);
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
/* Enable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
/* register CI interface */
budget_av->ca.owner = THIS_MODULE;
return 0;
error:
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
return result;
}
dvb_ca_en50221_release(&budget_av->ca);
/* disable DEBI pins */
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
}
.demod_address = 0x0c,
};
+static struct tda10021_config philips_cu1216_config_altaddress = {
+ .demod_address = 0x0d,
+};
+
return -EINVAL;
rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf,
- params->frequency, 0);
+ params->frequency, 0);
if(rc < 0) return rc;
if (fe->ops.i2c_gate_ctrl)
#define SUBID_DVBS_TV_STAR_CI 0x0016
#define SUBID_DVBS_EASYWATCH_1 0x001a
#define SUBID_DVBS_EASYWATCH 0x001e
+#define SUBID_DVBC_EASYWATCH 0x002a
#define SUBID_DVBC_KNC1 0x0020
#define SUBID_DVBC_KNC1_PLUS 0x0021
#define SUBID_DVBC_CINERGY1200 0x1156
/* Enable / PowerON Frontend */
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+ /* Wait for PowerON */
+ msleep(100);
+
/* additional setup necessary for the PLUS cards */
switch (saa->pci->subsystem_device) {
case SUBID_DVBS_KNC1_PLUS:
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBT_KNC1_PLUS:
+ case SUBID_DVBC_EASYWATCH:
saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
break;
}
case SUBID_DVBC_KNC1:
case SUBID_DVBC_KNC1_PLUS:
case SUBID_DVBC_CINERGY1200:
+ case SUBID_DVBC_EASYWATCH:
budget_av->reinitialise_demod = 1;
fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
&budget_av->budget.i2c_adap,
read_pwm(budget_av));
+ if (fe == NULL)
+ fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
+ &budget_av->budget.i2c_adap,
+ read_pwm(budget_av));
if (fe) {
budget_av->tda10021_poclkp = 1;
budget_av->tda10021_set_frontend = fe->ops.set_frontend;
MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+ MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
static struct saa7146_extension budget_extension = {
.name = "budget_av",
- .flags = SAA7146_I2C_SHORT_DELAY,
+ .flags = SAA7146_USE_I2C_IRQ,
.pci_tbl = pci_tbl,
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/spinlock.h>
+#include <media/ir-common.h>
#include "dvb_ca_en50221.h"
#include "stv0299.h"
#define SLOTSTATUS_READY 8
#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
+/* Milliseconds during which key presses are regarded as key repeat and during
+ * which the debounce logic is active
+ */
+#define IR_REPEAT_TIMEOUT 350
+
+/* RC5 device wildcard */
+#define IR_DEVICE_ANY 255
+
+/* Some remotes sends multiple sequences per keypress (e.g. Zenith sends two),
+ * this setting allows the superflous sequences to be ignored
+ */
+static int debounce = 0;
+module_param(debounce, int, 0644);
+MODULE_PARM_DESC(debounce, "ignore repeated IR sequences (default: 0 = ignore no sequences)");
+
+static int rc5_device = -1;
+module_param(rc5_device, int, 0644);
+MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
+
+static int ir_debug = 0;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
+
+struct budget_ci_ir {
+ struct input_dev *dev;
+ struct tasklet_struct msp430_irq_tasklet;
+ char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
+ char phys[32];
+ struct ir_input_state state;
+ int rc5_device;
+};
+
struct budget_ci {
struct budget budget;
- struct input_dev *input_dev;
- struct tasklet_struct msp430_irq_tasklet;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
int ci_irq;
struct dvb_ca_en50221 ca;
- char ir_dev_name[50];
+ struct budget_ci_ir ir;
u8 tuner_pll_address; /* used for philips_tdm1316l configs */
};
-/* from reading the following remotes:
- Zenith Universal 7 / TV Mode 807 / VCR Mode 837
- Hauppauge (from NOVA-CI-s box product)
- i've taken a "middle of the road" approach and note the differences
-*/
-static u16 key_map[64] = {
- /* 0x0X */
- KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8,
- KEY_9,
- KEY_ENTER,
- KEY_RED,
- KEY_POWER, /* RADIO on Hauppauge */
- KEY_MUTE,
- 0,
- KEY_A, /* TV on Hauppauge */
- /* 0x1X */
- KEY_VOLUMEUP, KEY_VOLUMEDOWN,
- 0, 0,
- KEY_B,
- 0, 0, 0, 0, 0, 0, 0,
- KEY_UP, KEY_DOWN,
- KEY_OPTION, /* RESERVED on Hauppauge */
- KEY_BREAK,
- /* 0x2X */
- KEY_CHANNELUP, KEY_CHANNELDOWN,
- KEY_PREVIOUS, /* Prev. Ch on Zenith, SOURCE on Hauppauge */
- 0, KEY_RESTART, KEY_OK,
- KEY_CYCLEWINDOWS, /* MINIMIZE on Hauppauge */
- 0,
- KEY_ENTER, /* VCR mode on Zenith */
- KEY_PAUSE,
- 0,
- KEY_RIGHT, KEY_LEFT,
- 0,
- KEY_MENU, /* FULL SCREEN on Hauppauge */
- 0,
- /* 0x3X */
- KEY_SLOW,
- KEY_PREVIOUS, /* VCR mode on Zenith */
- KEY_REWIND,
- 0,
- KEY_FASTFORWARD,
- KEY_PLAY, KEY_STOP,
- KEY_RECORD,
- KEY_TUNER, /* TV/VCR on Zenith */
- 0,
- KEY_C,
- 0,
- KEY_EXIT,
- KEY_POWER2,
- KEY_TUNER, /* VCR mode on Zenith */
- 0,
-};
-
-static void msp430_ir_debounce(unsigned long data)
+static void msp430_ir_keyup(unsigned long data)
{
- struct input_dev *dev = (struct input_dev *) data;
-
- if (dev->rep[0] == 0 || dev->rep[0] == ~0) {
- input_event(dev, EV_KEY, key_map[dev->repeat_key], !!0);
- return;
- }
-
- dev->rep[0] = 0;
- dev->timer.expires = jiffies + HZ * 350 / 1000;
- add_timer(&dev->timer);
- input_event(dev, EV_KEY, key_map[dev->repeat_key], 2); /* REPEAT */
+ struct budget_ci_ir *ir = (struct budget_ci_ir *) data;
+ ir_input_nokey(ir->dev, &ir->state);
}
static void msp430_ir_interrupt(unsigned long data)
{
struct budget_ci *budget_ci = (struct budget_ci *) data;
- struct input_dev *dev = budget_ci->input_dev;
- unsigned int code =
- ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
+ struct input_dev *dev = budget_ci->ir.dev;
+ static int bounces = 0;
+ int device;
+ int toggle;
+ static int prev_toggle = -1;
+ static u32 ir_key;
+ u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
+
+ /*
+ * The msp430 chip can generate two different bytes, command and device
+ *
+ * type1: X1CCCCCC, C = command bits (0 - 63)
+ * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
+ *
+ * More than one command byte may be generated before the device byte
+ * Only when we have both, a correct keypress is generated
+ */
+
+ /* Is this a RC5 command byte? */
+ if (command & 0x40) {
+ if (ir_debug)
+ printk("budget_ci: received command byte 0x%02x\n", command);
+ ir_key = command & 0x3f;
+ return;
+ }
- if (code & 0x40) {
- code &= 0x3f;
+ /* It's a RC5 device byte */
+ if (ir_debug)
+ printk("budget_ci: received device byte 0x%02x\n", command);
+ device = command & 0x1f;
+ toggle = command & 0x20;
- if (timer_pending(&dev->timer)) {
- if (code == dev->repeat_key) {
- ++dev->rep[0];
- return;
- }
- del_timer(&dev->timer);
- input_event(dev, EV_KEY, key_map[dev->repeat_key], !!0);
- }
+ if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && budget_ci->ir.rc5_device != device)
+ return;
- if (!key_map[code]) {
- printk("DVB (%s): no key for %02x!\n", __FUNCTION__, code);
- return;
- }
+ /* Ignore repeated key sequences if requested */
+ if (toggle == prev_toggle && ir_key == dev->repeat_key &&
+ bounces > 0 && timer_pending(&dev->timer)) {
+ if (ir_debug)
+ printk("budget_ci: debounce logic ignored IR command\n");
+ bounces--;
+ return;
+ }
+ prev_toggle = toggle;
- /* initialize debounce and repeat */
- dev->repeat_key = code;
- /* Zenith remote _always_ sends 2 sequences */
- dev->rep[0] = ~0;
- /* 350 milliseconds */
- dev->timer.expires = jiffies + HZ * 350 / 1000;
- /* MAKE */
- input_event(dev, EV_KEY, key_map[code], !0);
- add_timer(&dev->timer);
+ /* Are we still waiting for a keyup event? */
+ if (del_timer(&dev->timer))
+ ir_input_nokey(dev, &budget_ci->ir.state);
+
+ /* Generate keypress */
+ if (ir_debug)
+ printk("budget_ci: generating keypress 0x%02x\n", ir_key);
+ ir_input_keydown(dev, &budget_ci->ir.state, ir_key, (ir_key & (command << 8)));
+
+ /* Do we want to delay the keyup event? */
+ if (debounce) {
+ bounces = debounce;
+ mod_timer(&dev->timer, jiffies + msecs_to_jiffies(IR_REPEAT_TIMEOUT));
+ } else {
+ ir_input_nokey(dev, &budget_ci->ir.state);
}
}
static int msp430_ir_init(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
- struct input_dev *input_dev;
- int i;
+ struct input_dev *input_dev = budget_ci->ir.dev;
+ int error;
+
+ budget_ci->ir.dev = input_dev = input_allocate_device();
+ if (!input_dev) {
+ printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
+ error = -ENOMEM;
+ goto out1;
+ }
+
+ snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name),
+ "Budget-CI dvb ir receiver %s", saa->name);
+ snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
+ "pci-%s/ir0", pci_name(saa->pci));
- budget_ci->input_dev = input_dev = input_allocate_device();
- if (!input_dev)
- return -ENOMEM;
+ input_dev->name = budget_ci->ir.name;
- sprintf(budget_ci->ir_dev_name, "Budget-CI dvb ir receiver %s", saa->name);
+ input_dev->phys = budget_ci->ir.phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
+ if (saa->pci->subsystem_vendor) {
+ input_dev->id.vendor = saa->pci->subsystem_vendor;
+ input_dev->id.product = saa->pci->subsystem_device;
+ } else {
+ input_dev->id.vendor = saa->pci->vendor;
+ input_dev->id.product = saa->pci->device;
+ }
+ input_dev->cdev.dev = &saa->pci->dev;
- input_dev->name = budget_ci->ir_dev_name;
+ /* Select keymap and address */
+ switch (budget_ci->budget.dev->pci->subsystem_device) {
+ case 0x100c:
+ case 0x100f:
+ case 0x1010:
+ case 0x1011:
+ case 0x1012:
+ case 0x1017:
+ /* The hauppauge keymap is a superset of these remotes */
+ ir_input_init(input_dev, &budget_ci->ir.state,
+ IR_TYPE_RC5, ir_codes_hauppauge_new);
+
+ if (rc5_device < 0)
+ budget_ci->ir.rc5_device = 0x1f;
+ else
+ budget_ci->ir.rc5_device = rc5_device;
+ break;
+ default:
+ /* unknown remote */
+ ir_input_init(input_dev, &budget_ci->ir.state,
+ IR_TYPE_RC5, ir_codes_budget_ci_old);
+
+ if (rc5_device < 0)
+ budget_ci->ir.rc5_device = IR_DEVICE_ANY;
+ else
+ budget_ci->ir.rc5_device = rc5_device;
+ break;
+ }
- set_bit(EV_KEY, input_dev->evbit);
- for (i = 0; i < ARRAY_SIZE(key_map); i++)
- if (key_map[i])
- set_bit(key_map[i], input_dev->keybit);
+ /* initialise the key-up debounce timeout handler */
+ input_dev->timer.function = msp430_ir_keyup;
+ input_dev->timer.data = (unsigned long) &budget_ci->ir;
- input_register_device(budget_ci->input_dev);
+ error = input_register_device(input_dev);
+ if (error) {
+ printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
+ goto out2;
+ }
- input_dev->timer.function = msp430_ir_debounce;
+ tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt,
+ (unsigned long) budget_ci);
- saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_06);
+ SAA7146_IER_ENABLE(saa, MASK_06);
saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
return 0;
+
+out2:
+ input_free_device(input_dev);
+out1:
+ return error;
}
static void msp430_ir_deinit(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
- struct input_dev *dev = budget_ci->input_dev;
+ struct input_dev *dev = budget_ci->ir.dev;
- saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_06);
+ SAA7146_IER_DISABLE(saa, MASK_06);
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+ tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
- if (del_timer(&dev->timer))
- input_event(dev, EV_KEY, key_map[dev->repeat_key], !!0);
+ if (del_timer(&dev->timer)) {
+ ir_input_nokey(dev, &budget_ci->ir.state);
+ input_sync(dev);
+ }
input_unregister_device(dev);
}
memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
// enable DEBI pins
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+ saa7146_write(saa, MC1, MASK_27 | MASK_11);
// test if it is there
ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
} else {
saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
}
- saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
+ SAA7146_IER_ENABLE(saa, MASK_03);
}
// enable interface
return 0;
error:
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
return result;
}
// disable CI interrupts
if (budget_ci->ci_irq) {
- saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
+ SAA7146_IER_DISABLE(saa, MASK_03);
saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
tasklet_kill(&budget_ci->ciintf_irq_tasklet);
}
dvb_ca_en50221_release(&budget_ci->ca);
// disable DEBI pins
- saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+ saa7146_write(saa, MC1, MASK_27);
}
static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci);
if (*isr & MASK_06)
- tasklet_schedule(&budget_ci->msp430_irq_tasklet);
+ tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet);
if (*isr & MASK_10)
ttpci_budget_irq10_handler(dev, isr);
band = 1;
} else if (tuner_frequency < 200000000) {
cp = 6;
- band = 1;
+ band = 2;
} else if (tuner_frequency < 290000000) {
cp = 3;
band = 2;
struct budget_ci *budget_ci;
int err;
- if (!(budget_ci = kmalloc(sizeof(struct budget_ci), GFP_KERNEL)))
- return -ENOMEM;
+ budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL);
+ if (!budget_ci) {
+ err = -ENOMEM;
+ goto out1;
+ }
dprintk(2, "budget_ci: %p\n", budget_ci);
- budget_ci->budget.ci_present = 0;
-
dev->ext_priv = budget_ci;
- if ((err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE))) {
- kfree(budget_ci);
- return err;
- }
-
- tasklet_init(&budget_ci->msp430_irq_tasklet, msp430_ir_interrupt,
- (unsigned long) budget_ci);
+ err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE);
+ if (err)
+ goto out2;
- msp430_ir_init(budget_ci);
+ err = msp430_ir_init(budget_ci);
+ if (err)
+ goto out3;
ciintf_init(budget_ci);
ttpci_budget_init_hooks(&budget_ci->budget);
return 0;
+
+out3:
+ ttpci_budget_deinit(&budget_ci->budget);
+out2:
+ kfree(budget_ci);
+out1:
+ return err;
}
static int budget_ci_detach(struct saa7146_dev *dev)
if (budget_ci->budget.ci_present)
ciintf_deinit(budget_ci);
+ msp430_ir_deinit(budget_ci);
if (budget_ci->budget.dvb_frontend) {
dvb_unregister_frontend(budget_ci->budget.dvb_frontend);
dvb_frontend_detach(budget_ci->budget.dvb_frontend);
}
err = ttpci_budget_deinit(&budget_ci->budget);
- tasklet_kill(&budget_ci->msp430_irq_tasklet);
-
- msp430_ir_deinit(budget_ci);
-
// disable frontend and CI interface
saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
static struct saa7146_extension budget_extension = {
.name = "budget_ci dvb",
- .flags = SAA7146_I2C_SHORT_DELAY,
+ .flags = SAA7146_USE_I2C_IRQ,
.module = THIS_MODULE,
.pci_tbl = &pci_tbl[0],
static struct saa7146_extension budget_extension = {
.name = "budget dvb",
- .flags = SAA7146_I2C_SHORT_DELAY,
+ .flags = SAA7146_USE_I2C_IRQ,
.module = THIS_MODULE,
.pci_tbl = pci_tbl,
* for now lets report each signal as a key down and up*/
dprintk("%s:rc signal:%d\n", __FUNCTION__, buffer[4]);
input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 1);
+ input_sync(dec->rc_input_dev);
input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 0);
input_sync(dec->rc_input_dev);
}
struct input_dev *input_dev;
u8 b[] = { 0x00, 0x01 };
int i;
+ int err;
usb_make_path(dec->udev, dec->rc_phys, sizeof(dec->rc_phys));
strlcpy(dec->rc_phys, "/input0", sizeof(dec->rc_phys));
- dec->rc_input_dev = input_dev = input_allocate_device();
+ input_dev = input_allocate_device();
if (!input_dev)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(rc_keys); i++)
set_bit(rc_keys[i], input_dev->keybit);
- input_register_device(input_dev);
+ err = input_register_device(input_dev);
+ if (err) {
+ input_free_device(input_dev);
+ return err;
+ }
+ dec->rc_input_dev = input_dev;
if (usb_submit_urb(dec->irq_urb, GFP_KERNEL))
printk("%s: usb_submit_urb failed\n",__FUNCTION__);
/* enable irq pipe */
struct ttusbdecfe_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct ttusbdecfe_state*) kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL);
if (state == NULL)
return NULL;
struct ttusbdecfe_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct ttusbdecfe_state*) kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL);
if (state == NULL)
return NULL;
To compile this driver as a module, choose M here: the
module will be called ks0127.
+config VIDEO_OV7670
+ tristate "OmniVision OV7670 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the OmniVision
+ OV7670 VGA camera. It currently only works with the M88ALP01
+ controller.
+
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L1 && I2C
help
Support for the AverMedia 6 Eyes video surveillance card.
-config VIDEO_ZR36120
- tristate "Zoran ZR36120/36125 Video For Linux"
- depends on PCI && I2C && VIDEO_V4L1 && BROKEN
- help
- Support for ZR36120/ZR36125 based frame grabber/overlay boards.
- This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
- and Buster boards. Please read the material in
- <file:Documentation/video4linux/zr36120.txt> for more information.
-
- To compile this driver as a module, choose M here: the
- module will be called zr36120.
-
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
depends on PCI && SONYPI && VIDEO_V4L1
To compile this driver as a module, choose M here: the
module will be called arv.
+config VIDEO_CAFE_CCIC
+ tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
+ depends on I2C && VIDEO_V4L2
+ select VIDEO_OV7670
+ ---help---
+ This is a video4linux2 driver for the Marvell 88ALP01 integrated
+ CMOS camera controller. This is the controller found on first-
+ generation OLPC systems.
+
#
# USB Multimedia device configuration
#
source "drivers/media/video/em28xx/Kconfig"
+source "drivers/media/video/usbvision/Kconfig"
+
source "drivers/media/video/usbvideo/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
# Makefile for the video capture/playback device drivers.
#
-zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o
zr36067-objs := zoran_procfs.o zoran_device.o \
zoran_driver.o zoran_card.o
tuner-objs := tuner-core.o tuner-types.o tuner-simple.o \
obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o
obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o
-obj-$(CONFIG_VIDEO_ZR36120) += zoran.o
obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o
obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o
obj-$(CONFIG_VIDEO_SAA7134) += ir-kbd-i2c.o saa7134/
obj-$(CONFIG_VIDEO_CX88) += cx88/
obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
+obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
+obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
+obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
+
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_SE401) += se401.o
memset(i,0,sizeof(*i));
i->index = n;
i->type = V4L2_INPUT_TYPE_CAMERA;
- i->audioset = 0;
+ i->audioset = 1;
if (i->index == bttv_tvcards[btv->c.type].tuner) {
sprintf(i->name, "Television");
i->type = V4L2_INPUT_TYPE_TUNER;
if (0 != btv->i2c_rc)
return 0;
- if (btv->use_i2c_hw) {
- return i2c_del_adapter(&btv->c.i2c_adap);
- } else {
- return i2c_bit_del_bus(&btv->c.i2c_adap);
- }
+ return i2c_del_adapter(&btv->c.i2c_adap);
}
/*
/* ---------------------------------------------------------------------- */
+static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
+{
+ if (ir->polling) {
+ init_timer(&ir->timer);
+ ir->timer.function = bttv_input_timer;
+ ir->timer.data = (unsigned long)btv;
+ ir->timer.expires = jiffies + HZ;
+ add_timer(&ir->timer);
+ } else if (ir->rc5_gpio) {
+ /* set timer_end for code completion */
+ init_timer(&ir->timer_end);
+ ir->timer_end.function = bttv_rc5_timer_end;
+ ir->timer_end.data = (unsigned long)ir;
+
+ init_timer(&ir->timer_keyup);
+ ir->timer_keyup.function = bttv_rc5_timer_keyup;
+ ir->timer_keyup.data = (unsigned long)ir;
+ }
+}
+
+static void bttv_ir_stop(struct bttv *btv)
+{
+ if (btv->remote->polling) {
+ del_timer_sync(&btv->remote->timer);
+ flush_scheduled_work();
+ }
+
+ if (btv->remote->rc5_gpio) {
+ u32 gpio;
+
+ del_timer_sync(&btv->remote->timer_end);
+ flush_scheduled_work();
+
+ gpio = bttv_gpio_read(&btv->c);
+ bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
+ }
+}
+
int bttv_input_init(struct bttv *btv)
{
struct bttv_ir *ir;
IR_KEYTAB_TYPE *ir_codes = NULL;
struct input_dev *input_dev;
int ir_type = IR_TYPE_OTHER;
+ int err = -ENOMEM;
if (!btv->has_remote)
return -ENODEV;
ir = kzalloc(sizeof(*ir),GFP_KERNEL);
input_dev = input_allocate_device();
- if (!ir || !input_dev) {
- kfree(ir);
- input_free_device(input_dev);
- return -ENOMEM;
- }
- memset(ir,0,sizeof(*ir));
+ if (!ir || !input_dev)
+ goto err_out_free;
/* detect & configure */
switch (btv->c.type) {
break;
}
if (NULL == ir_codes) {
- dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n",btv->c.type);
- kfree(ir);
- input_free_device(input_dev);
- return -ENODEV;
+ dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type);
+ err = -ENODEV;
+ goto err_out_free;
}
if (ir->rc5_gpio) {
input_dev->cdev.dev = &btv->c.pci->dev;
btv->remote = ir;
- if (ir->polling) {
- init_timer(&ir->timer);
- ir->timer.function = bttv_input_timer;
- ir->timer.data = (unsigned long)btv;
- ir->timer.expires = jiffies + HZ;
- add_timer(&ir->timer);
- } else if (ir->rc5_gpio) {
- /* set timer_end for code completion */
- init_timer(&ir->timer_end);
- ir->timer_end.function = bttv_rc5_timer_end;
- ir->timer_end.data = (unsigned long)ir;
-
- init_timer(&ir->timer_keyup);
- ir->timer_keyup.function = bttv_rc5_timer_keyup;
- ir->timer_keyup.data = (unsigned long)ir;
- }
+ bttv_ir_start(btv, ir);
/* all done */
- input_register_device(btv->remote->dev);
- printk(DEVNAME ": %s detected at %s\n",ir->name,ir->phys);
+ err = input_register_device(btv->remote->dev);
+ if (err)
+ goto err_out_stop;
/* the remote isn't as bouncy as a keyboard */
ir->dev->rep[REP_DELAY] = repeat_delay;
ir->dev->rep[REP_PERIOD] = repeat_period;
return 0;
+
+ err_out_stop:
+ bttv_ir_stop(btv);
+ btv->remote = NULL;
+ err_out_free:
+ input_free_device(input_dev);
+ kfree(ir);
+ return err;
}
void bttv_input_fini(struct bttv *btv)
if (btv->remote == NULL)
return;
- if (btv->remote->polling) {
- del_timer_sync(&btv->remote->timer);
- flush_scheduled_work();
- }
-
-
- if (btv->remote->rc5_gpio) {
- u32 gpio;
-
- del_timer_sync(&btv->remote->timer_end);
- flush_scheduled_work();
-
- gpio = bttv_gpio_read(&btv->c);
- bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
- }
-
+ bttv_ir_stop(btv);
input_unregister_device(btv->remote->dev);
kfree(btv->remote);
btv->remote = NULL;
--- /dev/null
+/*
+ * Register definitions for the m88alp01 camera interface. Offsets in bytes
+ * as given in the spec.
+ *
+ * Copyright 2006 One Laptop Per Child Association, Inc.
+ *
+ * Written by Jonathan Corbet, corbet@lwn.net.
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+#define REG_Y0BAR 0x00
+#define REG_Y1BAR 0x04
+#define REG_Y2BAR 0x08
+/* ... */
+
+#define REG_IMGPITCH 0x24 /* Image pitch register */
+#define IMGP_YP_SHFT 2 /* Y pitch params */
+#define IMGP_YP_MASK 0x00003ffc /* Y pitch field */
+#define IMGP_UVP_SHFT 18 /* UV pitch (planar) */
+#define IMGP_UVP_MASK 0x3ffc0000
+#define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */
+#define IRQ_EOF0 0x00000001 /* End of frame 0 */
+#define IRQ_EOF1 0x00000002 /* End of frame 1 */
+#define IRQ_EOF2 0x00000004 /* End of frame 2 */
+#define IRQ_SOF0 0x00000008 /* Start of frame 0 */
+#define IRQ_SOF1 0x00000010 /* Start of frame 1 */
+#define IRQ_SOF2 0x00000020 /* Start of frame 2 */
+#define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */
+#define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */
+#define IRQ_TWSIR 0x00020000 /* TWSI read */
+#define IRQ_TWSIE 0x00040000 /* TWSI error */
+#define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
+#define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
+#define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
+#define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */
+#define REG_IRQSTAT 0x30 /* IRQ status / clear */
+
+#define REG_IMGSIZE 0x34 /* Image size */
+#define IMGSZ_V_MASK 0x1fff0000
+#define IMGSZ_V_SHIFT 16
+#define IMGSZ_H_MASK 0x00003fff
+#define REG_IMGOFFSET 0x38 /* IMage offset */
+
+#define REG_CTRL0 0x3c /* Control 0 */
+#define C0_ENABLE 0x00000001 /* Makes the whole thing go */
+
+/* Mask for all the format bits */
+#define C0_DF_MASK 0x00fffffc /* Bits 2-23 */
+
+/* RGB ordering */
+#define C0_RGB4_RGBX 0x00000000
+#define C0_RGB4_XRGB 0x00000004
+#define C0_RGB4_BGRX 0x00000008
+#define C0_RGB4_XBGR 0x0000000c
+#define C0_RGB5_RGGB 0x00000000
+#define C0_RGB5_GRBG 0x00000004
+#define C0_RGB5_GBRG 0x00000008
+#define C0_RGB5_BGGR 0x0000000c
+
+/* Spec has two fields for DIN and DOUT, but they must match, so
+ combine them here. */
+#define C0_DF_YUV 0x00000000 /* Data is YUV */
+#define C0_DF_RGB 0x000000a0 /* ... RGB */
+#define C0_DF_BAYER 0x00000140 /* ... Bayer */
+/* 8-8-8 must be missing from the below - ask */
+#define C0_RGBF_565 0x00000000
+#define C0_RGBF_444 0x00000800
+#define C0_RGB_BGR 0x00001000 /* Blue comes first */
+#define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */
+#define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */
+#define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */
+/* Think that 420 packed must be 111 - ask */
+#define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */
+#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */
+#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */
+#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */
+#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */
+#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */
+#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */
+#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */
+/* Bayer bits 18,19 if needed */
+#define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */
+#define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */
+#define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */
+#define C0_DOWNSCALE 0x08000000 /* Enable downscaler */
+#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */
+#define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */
+#define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */
+
+
+#define REG_CTRL1 0x40 /* Control 1 */
+#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */
+#define C1_ALPHA_SHFT 20
+#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */
+#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */
+#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */
+#define C1_DMAB_MASK 0x06000000
+#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */
+#define C1_PWRDWN 0x10000000 /* Power down */
+
+#define REG_CLKCTRL 0x88 /* Clock control */
+#define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */
+
+#define REG_GPR 0xb4 /* General purpose register. This
+ controls inputs to the power and reset
+ pins on the OV7670 used with OLPC;
+ other deployments could differ. */
+#define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */
+#define GPR_C0EN 0x00000010 /* Pad 0 (reset) enable */
+#define GPR_C1 0x00000002 /* Control 1 value */
+/*
+ * Control 0 is wired to reset on OLPC machines. For ov7x sensors,
+ * it is active low, for 0v6x, instead, it's active high. What
+ * fun.
+ */
+#define GPR_C0 0x00000001 /* Control 0 value */
+
+#define REG_TWSIC0 0xb8 /* TWSI (smbus) control 0 */
+#define TWSIC0_EN 0x00000001 /* TWSI enable */
+#define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */
+#define TWSIC0_SID 0x000003fc /* Slave ID */
+#define TWSIC0_SID_SHIFT 2
+#define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */
+#define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */
+#define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */
+
+#define REG_TWSIC1 0xbc /* TWSI control 1 */
+#define TWSIC1_DATA 0x0000ffff /* Data to/from camchip */
+#define TWSIC1_ADDR 0x00ff0000 /* Address (register) */
+#define TWSIC1_ADDR_SHIFT 16
+#define TWSIC1_READ 0x01000000 /* Set for read op */
+#define TWSIC1_WSTAT 0x02000000 /* Write status */
+#define TWSIC1_RVALID 0x04000000 /* Read data valid */
+#define TWSIC1_ERROR 0x08000000 /* Something screwed up */
+
+
+#define REG_UBAR 0xc4 /* Upper base address register */
+
+/*
+ * Here's the weird global control registers which are said to live
+ * way up here.
+ */
+#define REG_GL_CSR 0x3004 /* Control/status register */
+#define GCSR_SRS 0x00000001 /* SW Reset set */
+#define GCSR_SRC 0x00000002 /* SW Reset clear */
+#define GCSR_MRS 0x00000004 /* Master reset set */
+#define GCSR_MRC 0x00000008 /* HW Reset clear */
+#define GCSR_CCIC_EN 0x00004000 /* CCIC Clock enable */
+#define REG_GL_IMASK 0x300c /* Interrupt mask register */
+#define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */
+
+#define REG_LEN REG_GL_IMASK + 4
+
+
+/*
+ * Useful stuff that probably belongs somewhere global.
+ */
+#define VGA_WIDTH 640
+#define VGA_HEIGHT 480
--- /dev/null
+/*
+ * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe"
+ * multifunction chip. Currently works with the Omnivision OV7670
+ * sensor.
+ *
+ * Copyright 2006 One Laptop Per Child Association, Inc.
+ *
+ * Written by Jonathan Corbet, corbet@lwn.net.
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/debugfs.h>
+#include <linux/jiffies.h>
+#include <linux/vmalloc.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#include "cafe_ccic-regs.h"
+
+#define CAFE_VERSION 0x000001
+
+
+/*
+ * Parameters.
+ */
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
+MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("Video");
+
+/*
+ * Internal DMA buffer management. Since the controller cannot do S/G I/O,
+ * we must have physically contiguous buffers to bring frames into.
+ * These parameters control how many buffers we use, whether we
+ * allocate them at load time (better chance of success, but nails down
+ * memory) or when somebody tries to use the camera (riskier), and,
+ * for load-time allocation, how big they should be.
+ *
+ * The controller can cycle through three buffers. We could use
+ * more by flipping pointers around, but it probably makes little
+ * sense.
+ */
+
+#define MAX_DMA_BUFS 3
+static int alloc_bufs_at_load = 0;
+module_param(alloc_bufs_at_load, bool, 0444);
+MODULE_PARM_DESC(alloc_bufs_at_load,
+ "Non-zero value causes DMA buffers to be allocated at module "
+ "load time. This increases the chances of successfully getting "
+ "those buffers, but at the cost of nailing down the memory from "
+ "the outset.");
+
+static int n_dma_bufs = 3;
+module_param(n_dma_bufs, uint, 0644);
+MODULE_PARM_DESC(n_dma_bufs,
+ "The number of DMA buffers to allocate. Can be either two "
+ "(saves memory, makes timing tighter) or three.");
+
+static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2; /* Worst case */
+module_param(dma_buf_size, uint, 0444);
+MODULE_PARM_DESC(dma_buf_size,
+ "The size of the allocated DMA buffers. If actual operating "
+ "parameters require larger buffers, an attempt to reallocate "
+ "will be made.");
+
+static int min_buffers = 1;
+module_param(min_buffers, uint, 0644);
+MODULE_PARM_DESC(min_buffers,
+ "The minimum number of streaming I/O buffers we are willing "
+ "to work with.");
+
+static int max_buffers = 10;
+module_param(max_buffers, uint, 0644);
+MODULE_PARM_DESC(max_buffers,
+ "The maximum number of streaming I/O buffers an application "
+ "will be allowed to allocate. These buffers are big and live "
+ "in vmalloc space.");
+
+static int flip = 0;
+module_param(flip, bool, 0444);
+MODULE_PARM_DESC(flip,
+ "If set, the sensor will be instructed to flip the image "
+ "vertically.");
+
+
+enum cafe_state {
+ S_NOTREADY, /* Not yet initialized */
+ S_IDLE, /* Just hanging around */
+ S_FLAKED, /* Some sort of problem */
+ S_SINGLEREAD, /* In read() */
+ S_SPECREAD, /* Speculative read (for future read()) */
+ S_STREAMING /* Streaming data */
+};
+
+/*
+ * Tracking of streaming I/O buffers.
+ */
+struct cafe_sio_buffer {
+ struct list_head list;
+ struct v4l2_buffer v4lbuf;
+ char *buffer; /* Where it lives in kernel space */
+ int mapcount;
+ struct cafe_camera *cam;
+};
+
+/*
+ * A description of one of our devices.
+ * Locking: controlled by s_mutex. Certain fields, however, require
+ * the dev_lock spinlock; they are marked as such by comments.
+ * dev_lock is also required for access to device registers.
+ */
+struct cafe_camera
+{
+ enum cafe_state state;
+ unsigned long flags; /* Buffer status, mainly (dev_lock) */
+ int users; /* How many open FDs */
+ struct file *owner; /* Who has data access (v4l2) */
+
+ /*
+ * Subsystem structures.
+ */
+ struct pci_dev *pdev;
+ struct video_device v4ldev;
+ struct i2c_adapter i2c_adapter;
+ struct i2c_client *sensor;
+
+ unsigned char __iomem *regs;
+ struct list_head dev_list; /* link to other devices */
+
+ /* DMA buffers */
+ unsigned int nbufs; /* How many are alloc'd */
+ int next_buf; /* Next to consume (dev_lock) */
+ unsigned int dma_buf_size; /* allocated size */
+ void *dma_bufs[MAX_DMA_BUFS]; /* Internal buffer addresses */
+ dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */
+ unsigned int specframes; /* Unconsumed spec frames (dev_lock) */
+ unsigned int sequence; /* Frame sequence number */
+ unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual buffers */
+
+ /* Streaming buffers */
+ unsigned int n_sbufs; /* How many we have */
+ struct cafe_sio_buffer *sb_bufs; /* The array of housekeeping structs */
+ struct list_head sb_avail; /* Available for data (we own) (dev_lock) */
+ struct list_head sb_full; /* With data (user space owns) (dev_lock) */
+ struct tasklet_struct s_tasklet;
+
+ /* Current operating parameters */
+ enum v4l2_chip_ident sensor_type; /* Currently ov7670 only */
+ struct v4l2_pix_format pix_format;
+
+ /* Locks */
+ struct mutex s_mutex; /* Access to this structure */
+ spinlock_t dev_lock; /* Access to device */
+
+ /* Misc */
+ wait_queue_head_t smbus_wait; /* Waiting on i2c events */
+ wait_queue_head_t iowait; /* Waiting on frame data */
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ struct dentry *dfs_regs;
+ struct dentry *dfs_cam_regs;
+#endif
+};
+
+/*
+ * Status flags. Always manipulated with bit operations.
+ */
+#define CF_BUF0_VALID 0 /* Buffers valid - first three */
+#define CF_BUF1_VALID 1
+#define CF_BUF2_VALID 2
+#define CF_DMA_ACTIVE 3 /* A frame is incoming */
+#define CF_CONFIG_NEEDED 4 /* Must configure hardware */
+
+
+
+/*
+ * Start over with DMA buffers - dev_lock needed.
+ */
+static void cafe_reset_buffers(struct cafe_camera *cam)
+{
+ int i;
+
+ cam->next_buf = -1;
+ for (i = 0; i < cam->nbufs; i++)
+ clear_bit(i, &cam->flags);
+ cam->specframes = 0;
+}
+
+static inline int cafe_needs_config(struct cafe_camera *cam)
+{
+ return test_bit(CF_CONFIG_NEEDED, &cam->flags);
+}
+
+static void cafe_set_config_needed(struct cafe_camera *cam, int needed)
+{
+ if (needed)
+ set_bit(CF_CONFIG_NEEDED, &cam->flags);
+ else
+ clear_bit(CF_CONFIG_NEEDED, &cam->flags);
+}
+
+
+
+
+/*
+ * Debugging and related.
+ */
+#define cam_err(cam, fmt, arg...) \
+ dev_err(&(cam)->pdev->dev, fmt, ##arg);
+#define cam_warn(cam, fmt, arg...) \
+ dev_warn(&(cam)->pdev->dev, fmt, ##arg);
+#define cam_dbg(cam, fmt, arg...) \
+ dev_dbg(&(cam)->pdev->dev, fmt, ##arg);
+
+
+/* ---------------------------------------------------------------------*/
+/*
+ * We keep a simple list of known devices to search at open time.
+ */
+static LIST_HEAD(cafe_dev_list);
+static DEFINE_MUTEX(cafe_dev_list_lock);
+
+static void cafe_add_dev(struct cafe_camera *cam)
+{
+ mutex_lock(&cafe_dev_list_lock);
+ list_add_tail(&cam->dev_list, &cafe_dev_list);
+ mutex_unlock(&cafe_dev_list_lock);
+}
+
+static void cafe_remove_dev(struct cafe_camera *cam)
+{
+ mutex_lock(&cafe_dev_list_lock);
+ list_del(&cam->dev_list);
+ mutex_unlock(&cafe_dev_list_lock);
+}
+
+static struct cafe_camera *cafe_find_dev(int minor)
+{
+ struct cafe_camera *cam;
+
+ mutex_lock(&cafe_dev_list_lock);
+ list_for_each_entry(cam, &cafe_dev_list, dev_list) {
+ if (cam->v4ldev.minor == minor)
+ goto done;
+ }
+ cam = NULL;
+ done:
+ mutex_unlock(&cafe_dev_list_lock);
+ return cam;
+}
+
+
+static struct cafe_camera *cafe_find_by_pdev(struct pci_dev *pdev)
+{
+ struct cafe_camera *cam;
+
+ mutex_lock(&cafe_dev_list_lock);
+ list_for_each_entry(cam, &cafe_dev_list, dev_list) {
+ if (cam->pdev == pdev)
+ goto done;
+ }
+ cam = NULL;
+ done:
+ mutex_unlock(&cafe_dev_list_lock);
+ return cam;
+}
+
+
+/* ------------------------------------------------------------------------ */
+/*
+ * Device register I/O
+ */
+static inline void cafe_reg_write(struct cafe_camera *cam, unsigned int reg,
+ unsigned int val)
+{
+ iowrite32(val, cam->regs + reg);
+}
+
+static inline unsigned int cafe_reg_read(struct cafe_camera *cam,
+ unsigned int reg)
+{
+ return ioread32(cam->regs + reg);
+}
+
+
+static inline void cafe_reg_write_mask(struct cafe_camera *cam, unsigned int reg,
+ unsigned int val, unsigned int mask)
+{
+ unsigned int v = cafe_reg_read(cam, reg);
+
+ v = (v & ~mask) | (val & mask);
+ cafe_reg_write(cam, reg, v);
+}
+
+static inline void cafe_reg_clear_bit(struct cafe_camera *cam,
+ unsigned int reg, unsigned int val)
+{
+ cafe_reg_write_mask(cam, reg, 0, val);
+}
+
+static inline void cafe_reg_set_bit(struct cafe_camera *cam,
+ unsigned int reg, unsigned int val)
+{
+ cafe_reg_write_mask(cam, reg, val, val);
+}
+
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * The I2C/SMBUS interface to the camera itself starts here. The
+ * controller handles SMBUS itself, presenting a relatively simple register
+ * interface; all we have to do is to tell it where to route the data.
+ */
+#define CAFE_SMBUS_TIMEOUT (HZ) /* generous */
+
+static int cafe_smbus_write_done(struct cafe_camera *cam)
+{
+ unsigned long flags;
+ int c1;
+
+ /*
+ * We must delay after the interrupt, or the controller gets confused
+ * and never does give us good status. Fortunately, we don't do this
+ * often.
+ */
+ udelay(20);
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ c1 = cafe_reg_read(cam, REG_TWSIC1);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+ return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT;
+}
+
+static int cafe_smbus_write_data(struct cafe_camera *cam,
+ u16 addr, u8 command, u8 value)
+{
+ unsigned int rval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
+ rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */
+ /*
+ * Marvell sez set clkdiv to all 1's for now.
+ */
+ rval |= TWSIC0_CLKDIV;
+ cafe_reg_write(cam, REG_TWSIC0, rval);
+ (void) cafe_reg_read(cam, REG_TWSIC1); /* force write */
+ rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+ cafe_reg_write(cam, REG_TWSIC1, rval);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+ msleep(2); /* Required or things flake */
+
+ wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(cam),
+ CAFE_SMBUS_TIMEOUT);
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ rval = cafe_reg_read(cam, REG_TWSIC1);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+
+ if (rval & TWSIC1_WSTAT) {
+ cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr,
+ command, value);
+ return -EIO;
+ }
+ if (rval & TWSIC1_ERROR) {
+ cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr,
+ command, value);
+ return -EIO;
+ }
+ return 0;
+}
+
+
+
+static int cafe_smbus_read_done(struct cafe_camera *cam)
+{
+ unsigned long flags;
+ int c1;
+
+ /*
+ * We must delay after the interrupt, or the controller gets confused
+ * and never does give us good status. Fortunately, we don't do this
+ * often.
+ */
+ udelay(20);
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ c1 = cafe_reg_read(cam, REG_TWSIC1);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+ return c1 & (TWSIC1_RVALID|TWSIC1_ERROR);
+}
+
+
+
+static int cafe_smbus_read_data(struct cafe_camera *cam,
+ u16 addr, u8 command, u8 *value)
+{
+ unsigned int rval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
+ rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */
+ /*
+ * Marvel sez set clkdiv to all 1's for now.
+ */
+ rval |= TWSIC0_CLKDIV;
+ cafe_reg_write(cam, REG_TWSIC0, rval);
+ (void) cafe_reg_read(cam, REG_TWSIC1); /* force write */
+ rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+ cafe_reg_write(cam, REG_TWSIC1, rval);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+
+ wait_event_timeout(cam->smbus_wait,
+ cafe_smbus_read_done(cam), CAFE_SMBUS_TIMEOUT);
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ rval = cafe_reg_read(cam, REG_TWSIC1);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+
+ if (rval & TWSIC1_ERROR) {
+ cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command);
+ return -EIO;
+ }
+ if (! (rval & TWSIC1_RVALID)) {
+ cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr,
+ command);
+ return -EIO;
+ }
+ *value = rval & 0xff;
+ return 0;
+}
+
+/*
+ * Perform a transfer over SMBUS. This thing is called under
+ * the i2c bus lock, so we shouldn't race with ourselves...
+ */
+static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char rw, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ struct cafe_camera *cam = i2c_get_adapdata(adapter);
+ int ret = -EINVAL;
+
+ /*
+ * Refuse to talk to anything but OV cam chips. We should
+ * never even see an attempt to do so, but one never knows.
+ */
+ if (cam->sensor && addr != cam->sensor->addr) {
+ cam_err(cam, "funky smbus addr %d\n", addr);
+ return -EINVAL;
+ }
+ /*
+ * This interface would appear to only do byte data ops. OK
+ * it can do word too, but the cam chip has no use for that.
+ */
+ if (size != I2C_SMBUS_BYTE_DATA) {
+ cam_err(cam, "funky xfer size %d\n", size);
+ return -EINVAL;
+ }
+
+ if (rw == I2C_SMBUS_WRITE)
+ ret = cafe_smbus_write_data(cam, addr, command, data->byte);
+ else if (rw == I2C_SMBUS_READ)
+ ret = cafe_smbus_read_data(cam, addr, command, &data->byte);
+ return ret;
+}
+
+
+static void cafe_smbus_enable_irq(struct cafe_camera *cam)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ cafe_reg_set_bit(cam, REG_IRQMASK, TWSIIRQS);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+static u32 cafe_smbus_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_READ_BYTE_DATA |
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+}
+
+static struct i2c_algorithm cafe_smbus_algo = {
+ .smbus_xfer = cafe_smbus_xfer,
+ .functionality = cafe_smbus_func
+};
+
+/* Somebody is on the bus */
+static int cafe_cam_init(struct cafe_camera *cam);
+static void cafe_ctlr_stop_dma(struct cafe_camera *cam);
+static void cafe_ctlr_power_down(struct cafe_camera *cam);
+
+static int cafe_smbus_attach(struct i2c_client *client)
+{
+ struct cafe_camera *cam = i2c_get_adapdata(client->adapter);
+
+ /*
+ * Don't talk to chips we don't recognize.
+ */
+ if (client->driver->id == I2C_DRIVERID_OV7670) {
+ cam->sensor = client;
+ return cafe_cam_init(cam);
+ }
+ return -EINVAL;
+}
+
+static int cafe_smbus_detach(struct i2c_client *client)
+{
+ struct cafe_camera *cam = i2c_get_adapdata(client->adapter);
+
+ if (cam->sensor == client) {
+ cafe_ctlr_stop_dma(cam);
+ cafe_ctlr_power_down(cam);
+ cam_err(cam, "lost the sensor!\n");
+ cam->sensor = NULL; /* Bummer, no camera */
+ cam->state = S_NOTREADY;
+ }
+ return 0;
+}
+
+static int cafe_smbus_setup(struct cafe_camera *cam)
+{
+ struct i2c_adapter *adap = &cam->i2c_adapter;
+ int ret;
+
+ cafe_smbus_enable_irq(cam);
+ adap->id = I2C_HW_SMBUS_CAFE;
+ adap->class = I2C_CLASS_CAM_DIGITAL;
+ adap->owner = THIS_MODULE;
+ adap->client_register = cafe_smbus_attach;
+ adap->client_unregister = cafe_smbus_detach;
+ adap->algo = &cafe_smbus_algo;
+ strcpy(adap->name, "cafe_ccic");
+ i2c_set_adapdata(adap, cam);
+ ret = i2c_add_adapter(adap);
+ if (ret)
+ printk(KERN_ERR "Unable to register cafe i2c adapter\n");
+ return ret;
+}
+
+static void cafe_smbus_shutdown(struct cafe_camera *cam)
+{
+ i2c_del_adapter(&cam->i2c_adapter);
+}
+
+
+/* ------------------------------------------------------------------- */
+/*
+ * Deal with the controller.
+ */
+
+/*
+ * Do everything we think we need to have the interface operating
+ * according to the desired format.
+ */
+static void cafe_ctlr_dma(struct cafe_camera *cam)
+{
+ /*
+ * Store the first two Y buffers (we aren't supporting
+ * planar formats for now, so no UV bufs). Then either
+ * set the third if it exists, or tell the controller
+ * to just use two.
+ */
+ cafe_reg_write(cam, REG_Y0BAR, cam->dma_handles[0]);
+ cafe_reg_write(cam, REG_Y1BAR, cam->dma_handles[1]);
+ if (cam->nbufs > 2) {
+ cafe_reg_write(cam, REG_Y2BAR, cam->dma_handles[2]);
+ cafe_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS);
+ }
+ else
+ cafe_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS);
+ cafe_reg_write(cam, REG_UBAR, 0); /* 32 bits only for now */
+}
+
+static void cafe_ctlr_image(struct cafe_camera *cam)
+{
+ int imgsz;
+ struct v4l2_pix_format *fmt = &cam->pix_format;
+
+ imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) |
+ (fmt->bytesperline & IMGSZ_H_MASK);
+ cafe_reg_write(cam, REG_IMGSIZE, imgsz);
+ cafe_reg_write(cam, REG_IMGOFFSET, 0);
+ /* YPITCH just drops the last two bits */
+ cafe_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline,
+ IMGP_YP_MASK);
+ /*
+ * Tell the controller about the image format we are using.
+ */
+ switch (cam->pix_format.pixelformat) {
+ case V4L2_PIX_FMT_YUYV:
+ cafe_reg_write_mask(cam, REG_CTRL0,
+ C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV,
+ C0_DF_MASK);
+ break;
+
+ case V4L2_PIX_FMT_RGB444:
+ cafe_reg_write_mask(cam, REG_CTRL0,
+ C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB,
+ C0_DF_MASK);
+ /* Alpha value? */
+ break;
+
+ case V4L2_PIX_FMT_RGB565:
+ cafe_reg_write_mask(cam, REG_CTRL0,
+ C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR,
+ C0_DF_MASK);
+ break;
+
+ default:
+ cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat);
+ break;
+ }
+ /*
+ * Make sure it knows we want to use hsync/vsync.
+ */
+ cafe_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC,
+ C0_SIFM_MASK);
+}
+
+
+/*
+ * Configure the controller for operation; caller holds the
+ * device mutex.
+ */
+static int cafe_ctlr_configure(struct cafe_camera *cam)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ cafe_ctlr_dma(cam);
+ cafe_ctlr_image(cam);
+ cafe_set_config_needed(cam, 0);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+ return 0;
+}
+
+static void cafe_ctlr_irq_enable(struct cafe_camera *cam)
+{
+ /*
+ * Clear any pending interrupts, since we do not
+ * expect to have I/O active prior to enabling.
+ */
+ cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS);
+ cafe_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS);
+}
+
+static void cafe_ctlr_irq_disable(struct cafe_camera *cam)
+{
+ cafe_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS);
+}
+
+/*
+ * Make the controller start grabbing images. Everything must
+ * be set up before doing this.
+ */
+static void cafe_ctlr_start(struct cafe_camera *cam)
+{
+ /* set_bit performs a read, so no other barrier should be
+ needed here */
+ cafe_reg_set_bit(cam, REG_CTRL0, C0_ENABLE);
+}
+
+static void cafe_ctlr_stop(struct cafe_camera *cam)
+{
+ cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
+}
+
+static void cafe_ctlr_init(struct cafe_camera *cam)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ /*
+ * Added magic to bring up the hardware on the B-Test board
+ */
+ cafe_reg_write(cam, 0x3038, 0x8);
+ cafe_reg_write(cam, 0x315c, 0x80008);
+ /*
+ * Go through the dance needed to wake the device up.
+ * Note that these registers are global and shared
+ * with the NAND and SD devices. Interaction between the
+ * three still needs to be examined.
+ */
+ cafe_reg_write(cam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */
+ cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRC);
+ cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRS);
+ mdelay(5); /* FIXME revisit this */
+ cafe_reg_write(cam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC);
+ cafe_reg_set_bit(cam, REG_GL_IMASK, GIMSK_CCIC_EN);
+ /*
+ * Make sure it's not powered down.
+ */
+ cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
+ /*
+ * Turn off the enable bit. It sure should be off anyway,
+ * but it's good to be sure.
+ */
+ cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
+ /*
+ * Mask all interrupts.
+ */
+ cafe_reg_write(cam, REG_IRQMASK, 0);
+ /*
+ * Clock the sensor appropriately. Controller clock should
+ * be 48MHz, sensor "typical" value is half that.
+ */
+ cafe_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+
+/*
+ * Stop the controller, and don't return until we're really sure that no
+ * further DMA is going on.
+ */
+static void cafe_ctlr_stop_dma(struct cafe_camera *cam)
+{
+ unsigned long flags;
+
+ /*
+ * Theory: stop the camera controller (whether it is operating
+ * or not). Delay briefly just in case we race with the SOF
+ * interrupt, then wait until no DMA is active.
+ */
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ cafe_ctlr_stop(cam);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+ mdelay(1);
+ wait_event_timeout(cam->iowait,
+ !test_bit(CF_DMA_ACTIVE, &cam->flags), HZ);
+ if (test_bit(CF_DMA_ACTIVE, &cam->flags))
+ cam_err(cam, "Timeout waiting for DMA to end\n");
+ /* This would be bad news - what now? */
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ cam->state = S_IDLE;
+ cafe_ctlr_irq_disable(cam);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+/*
+ * Power up and down.
+ */
+static void cafe_ctlr_power_up(struct cafe_camera *cam)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
+ /*
+ * Put the sensor into operational mode (assumes OLPC-style
+ * wiring). Control 0 is reset - set to 1 to operate.
+ * Control 1 is power down, set to 0 to operate.
+ */
+ cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */
+ mdelay(1); /* Marvell says 1ms will do it */
+ cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0);
+ mdelay(1); /* Enough? */
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+static void cafe_ctlr_power_down(struct cafe_camera *cam)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1);
+ cafe_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+/* -------------------------------------------------------------------- */
+/*
+ * Communications with the sensor.
+ */
+
+static int __cafe_cam_cmd(struct cafe_camera *cam, int cmd, void *arg)
+{
+ struct i2c_client *sc = cam->sensor;
+ int ret;
+
+ if (sc == NULL || sc->driver == NULL || sc->driver->command == NULL)
+ return -EINVAL;
+ ret = sc->driver->command(sc, cmd, arg);
+ if (ret == -EPERM) /* Unsupported command */
+ return 0;
+ return ret;
+}
+
+static int __cafe_cam_reset(struct cafe_camera *cam)
+{
+ int zero = 0;
+ return __cafe_cam_cmd(cam, VIDIOC_INT_RESET, &zero);
+}
+
+/*
+ * We have found the sensor on the i2c. Let's try to have a
+ * conversation.
+ */
+static int cafe_cam_init(struct cafe_camera *cam)
+{
+ int ret;
+
+ mutex_lock(&cam->s_mutex);
+ if (cam->state != S_NOTREADY)
+ cam_warn(cam, "Cam init with device in funky state %d",
+ cam->state);
+ ret = __cafe_cam_reset(cam);
+ if (ret)
+ goto out;
+ ret = __cafe_cam_cmd(cam, VIDIOC_INT_G_CHIP_IDENT, &cam->sensor_type);
+ if (ret)
+ goto out;
+// if (cam->sensor->addr != OV7xx0_SID) {
+ if (cam->sensor_type != V4L2_IDENT_OV7670) {
+ cam_err(cam, "Unsupported sensor type %d", cam->sensor->addr);
+ ret = -EINVAL;
+ goto out;
+ }
+/* Get/set parameters? */
+ ret = 0;
+ cam->state = S_IDLE;
+ out:
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+/*
+ * Configure the sensor to match the parameters we have. Caller should
+ * hold s_mutex
+ */
+static int cafe_cam_set_flip(struct cafe_camera *cam)
+{
+ struct v4l2_control ctrl;
+
+ memset(&ctrl, 0, sizeof(ctrl));
+ ctrl.id = V4L2_CID_VFLIP;
+ ctrl.value = flip;
+ return __cafe_cam_cmd(cam, VIDIOC_S_CTRL, &ctrl);
+}
+
+
+static int cafe_cam_configure(struct cafe_camera *cam)
+{
+ struct v4l2_format fmt;
+ int ret, zero = 0;
+
+ if (cam->state != S_IDLE)
+ return -EINVAL;
+ fmt.fmt.pix = cam->pix_format;
+ ret = __cafe_cam_cmd(cam, VIDIOC_INT_INIT, &zero);
+ if (ret == 0)
+ ret = __cafe_cam_cmd(cam, VIDIOC_S_FMT, &fmt);
+ /*
+ * OV7670 does weird things if flip is set *before* format...
+ */
+ ret += cafe_cam_set_flip(cam);
+ return ret;
+}
+
+/* -------------------------------------------------------------------- */
+/*
+ * DMA buffer management. These functions need s_mutex held.
+ */
+
+/* FIXME: this is inefficient as hell, since dma_alloc_coherent just
+ * does a get_free_pages() call, and we waste a good chunk of an orderN
+ * allocation. Should try to allocate the whole set in one chunk.
+ */
+static int cafe_alloc_dma_bufs(struct cafe_camera *cam, int loadtime)
+{
+ int i;
+
+ cafe_set_config_needed(cam, 1);
+ if (loadtime)
+ cam->dma_buf_size = dma_buf_size;
+ else
+ cam->dma_buf_size = cam->pix_format.sizeimage;
+ if (n_dma_bufs > 3)
+ n_dma_bufs = 3;
+
+ cam->nbufs = 0;
+ for (i = 0; i < n_dma_bufs; i++) {
+ cam->dma_bufs[i] = dma_alloc_coherent(&cam->pdev->dev,
+ cam->dma_buf_size, cam->dma_handles + i,
+ GFP_KERNEL);
+ if (cam->dma_bufs[i] == NULL) {
+ cam_warn(cam, "Failed to allocate DMA buffer\n");
+ break;
+ }
+ /* For debug, remove eventually */
+ memset(cam->dma_bufs[i], 0xcc, cam->dma_buf_size);
+ (cam->nbufs)++;
+ }
+
+ switch (cam->nbufs) {
+ case 1:
+ dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size,
+ cam->dma_bufs[0], cam->dma_handles[0]);
+ cam->nbufs = 0;
+ case 0:
+ cam_err(cam, "Insufficient DMA buffers, cannot operate\n");
+ return -ENOMEM;
+
+ case 2:
+ if (n_dma_bufs > 2)
+ cam_warn(cam, "Will limp along with only 2 buffers\n");
+ break;
+ }
+ return 0;
+}
+
+static void cafe_free_dma_bufs(struct cafe_camera *cam)
+{
+ int i;
+
+ for (i = 0; i < cam->nbufs; i++) {
+ dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size,
+ cam->dma_bufs[i], cam->dma_handles[i]);
+ cam->dma_bufs[i] = NULL;
+ }
+ cam->nbufs = 0;
+}
+
+
+
+
+
+/* ----------------------------------------------------------------------- */
+/*
+ * Here starts the V4L2 interface code.
+ */
+
+/*
+ * Read an image from the device.
+ */
+static ssize_t cafe_deliver_buffer(struct cafe_camera *cam,
+ char __user *buffer, size_t len, loff_t *pos)
+{
+ int bufno;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ if (cam->next_buf < 0) {
+ cam_err(cam, "deliver_buffer: No next buffer\n");
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+ return -EIO;
+ }
+ bufno = cam->next_buf;
+ clear_bit(bufno, &cam->flags);
+ if (++(cam->next_buf) >= cam->nbufs)
+ cam->next_buf = 0;
+ if (! test_bit(cam->next_buf, &cam->flags))
+ cam->next_buf = -1;
+ cam->specframes = 0;
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+
+ if (len > cam->pix_format.sizeimage)
+ len = cam->pix_format.sizeimage;
+ if (copy_to_user(buffer, cam->dma_bufs[bufno], len))
+ return -EFAULT;
+ (*pos) += len;
+ return len;
+}
+
+/*
+ * Get everything ready, and start grabbing frames.
+ */
+static int cafe_read_setup(struct cafe_camera *cam, enum cafe_state state)
+{
+ int ret;
+ unsigned long flags;
+
+ /*
+ * Configuration. If we still don't have DMA buffers,
+ * make one last, desperate attempt.
+ */
+ if (cam->nbufs == 0)
+ if (cafe_alloc_dma_bufs(cam, 0))
+ return -ENOMEM;
+
+ if (cafe_needs_config(cam)) {
+ cafe_cam_configure(cam);
+ ret = cafe_ctlr_configure(cam);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Turn it loose.
+ */
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ cafe_reset_buffers(cam);
+ cafe_ctlr_irq_enable(cam);
+ cam->state = state;
+ cafe_ctlr_start(cam);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+ return 0;
+}
+
+
+static ssize_t cafe_v4l_read(struct file *filp,
+ char __user *buffer, size_t len, loff_t *pos)
+{
+ struct cafe_camera *cam = filp->private_data;
+ int ret;
+
+ /*
+ * Perhaps we're in speculative read mode and already
+ * have data?
+ */
+ mutex_lock(&cam->s_mutex);
+ if (cam->state == S_SPECREAD) {
+ if (cam->next_buf >= 0) {
+ ret = cafe_deliver_buffer(cam, buffer, len, pos);
+ if (ret != 0)
+ goto out_unlock;
+ }
+ } else if (cam->state == S_FLAKED || cam->state == S_NOTREADY) {
+ ret = -EIO;
+ goto out_unlock;
+ } else if (cam->state != S_IDLE) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+
+ /*
+ * v4l2: multiple processes can open the device, but only
+ * one gets to grab data from it.
+ */
+ if (cam->owner && cam->owner != filp) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+ cam->owner = filp;
+
+ /*
+ * Do setup if need be.
+ */
+ if (cam->state != S_SPECREAD) {
+ ret = cafe_read_setup(cam, S_SINGLEREAD);
+ if (ret)
+ goto out_unlock;
+ }
+ /*
+ * Wait for something to happen. This should probably
+ * be interruptible (FIXME).
+ */
+ wait_event_timeout(cam->iowait, cam->next_buf >= 0, HZ);
+ if (cam->next_buf < 0) {
+ cam_err(cam, "read() operation timed out\n");
+ cafe_ctlr_stop_dma(cam);
+ ret = -EIO;
+ goto out_unlock;
+ }
+ /*
+ * Give them their data and we should be done.
+ */
+ ret = cafe_deliver_buffer(cam, buffer, len, pos);
+
+ out_unlock:
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+
+
+
+
+
+
+
+/*
+ * Streaming I/O support.
+ */
+
+
+
+static int cafe_vidioc_streamon(struct file *filp, void *priv,
+ enum v4l2_buf_type type)
+{
+ struct cafe_camera *cam = filp->private_data;
+ int ret = -EINVAL;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ goto out;
+ mutex_lock(&cam->s_mutex);
+ if (cam->state != S_IDLE || cam->n_sbufs == 0)
+ goto out_unlock;
+
+ cam->sequence = 0;
+ ret = cafe_read_setup(cam, S_STREAMING);
+
+ out_unlock:
+ mutex_unlock(&cam->s_mutex);
+ out:
+ return ret;
+}
+
+
+static int cafe_vidioc_streamoff(struct file *filp, void *priv,
+ enum v4l2_buf_type type)
+{
+ struct cafe_camera *cam = filp->private_data;
+ int ret = -EINVAL;
+
+ if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ goto out;
+ mutex_lock(&cam->s_mutex);
+ if (cam->state != S_STREAMING)
+ goto out_unlock;
+
+ cafe_ctlr_stop_dma(cam);
+ ret = 0;
+
+ out_unlock:
+ mutex_unlock(&cam->s_mutex);
+ out:
+ return ret;
+}
+
+
+
+static int cafe_setup_siobuf(struct cafe_camera *cam, int index)
+{
+ struct cafe_sio_buffer *buf = cam->sb_bufs + index;
+
+ INIT_LIST_HEAD(&buf->list);
+ buf->v4lbuf.length = PAGE_ALIGN(cam->pix_format.sizeimage);
+ buf->buffer = vmalloc_user(buf->v4lbuf.length);
+ if (buf->buffer == NULL)
+ return -ENOMEM;
+ buf->mapcount = 0;
+ buf->cam = cam;
+
+ buf->v4lbuf.index = index;
+ buf->v4lbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ buf->v4lbuf.field = V4L2_FIELD_NONE;
+ buf->v4lbuf.memory = V4L2_MEMORY_MMAP;
+ /*
+ * Offset: must be 32-bit even on a 64-bit system. video-buf
+ * just uses the length times the index, but the spec warns
+ * against doing just that - vma merging problems. So we
+ * leave a gap between each pair of buffers.
+ */
+ buf->v4lbuf.m.offset = 2*index*buf->v4lbuf.length;
+ return 0;
+}
+
+static int cafe_free_sio_buffers(struct cafe_camera *cam)
+{
+ int i;
+
+ /*
+ * If any buffers are mapped, we cannot free them at all.
+ */
+ for (i = 0; i < cam->n_sbufs; i++)
+ if (cam->sb_bufs[i].mapcount > 0)
+ return -EBUSY;
+ /*
+ * OK, let's do it.
+ */
+ for (i = 0; i < cam->n_sbufs; i++)
+ vfree(cam->sb_bufs[i].buffer);
+ cam->n_sbufs = 0;
+ kfree(cam->sb_bufs);
+ cam->sb_bufs = NULL;
+ INIT_LIST_HEAD(&cam->sb_avail);
+ INIT_LIST_HEAD(&cam->sb_full);
+ return 0;
+}
+
+
+
+static int cafe_vidioc_reqbufs(struct file *filp, void *priv,
+ struct v4l2_requestbuffers *req)
+{
+ struct cafe_camera *cam = filp->private_data;
+ int ret;
+
+ /*
+ * Make sure it's something we can do. User pointers could be
+ * implemented without great pain, but that's not been done yet.
+ */
+ if (req->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (req->memory != V4L2_MEMORY_MMAP)
+ return -EINVAL;
+ /*
+ * If they ask for zero buffers, they really want us to stop streaming
+ * (if it's happening) and free everything. Should we check owner?
+ */
+ mutex_lock(&cam->s_mutex);
+ if (req->count == 0) {
+ if (cam->state == S_STREAMING)
+ cafe_ctlr_stop_dma(cam);
+ ret = cafe_free_sio_buffers (cam);
+ goto out;
+ }
+ /*
+ * Device needs to be idle and working. We *could* try to do the
+ * right thing in S_SPECREAD by shutting things down, but it
+ * probably doesn't matter.
+ */
+ if (cam->state != S_IDLE || (cam->owner && cam->owner != filp)) {
+ ret = -EBUSY;
+ goto out;
+ }
+ cam->owner = filp;
+
+ if (req->count < min_buffers)
+ req->count = min_buffers;
+ else if (req->count > max_buffers)
+ req->count = max_buffers;
+ if (cam->n_sbufs > 0) {
+ ret = cafe_free_sio_buffers(cam);
+ if (ret)
+ goto out;
+ }
+
+ cam->sb_bufs = kzalloc(req->count*sizeof(struct cafe_sio_buffer),
+ GFP_KERNEL);
+ if (cam->sb_bufs == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ for (cam->n_sbufs = 0; cam->n_sbufs < req->count; (cam->n_sbufs++)) {
+ ret = cafe_setup_siobuf(cam, cam->n_sbufs);
+ if (ret)
+ break;
+ }
+
+ if (cam->n_sbufs == 0) /* no luck at all - ret already set */
+ kfree(cam->sb_bufs);
+ else
+ ret = 0;
+ req->count = cam->n_sbufs; /* In case of partial success */
+
+ out:
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+
+static int cafe_vidioc_querybuf(struct file *filp, void *priv,
+ struct v4l2_buffer *buf)
+{
+ struct cafe_camera *cam = filp->private_data;
+ int ret = -EINVAL;
+
+ mutex_lock(&cam->s_mutex);
+ if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ goto out;
+ if (buf->index < 0 || buf->index >= cam->n_sbufs)
+ goto out;
+ *buf = cam->sb_bufs[buf->index].v4lbuf;
+ ret = 0;
+ out:
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+static int cafe_vidioc_qbuf(struct file *filp, void *priv,
+ struct v4l2_buffer *buf)
+{
+ struct cafe_camera *cam = filp->private_data;
+ struct cafe_sio_buffer *sbuf;
+ int ret = -EINVAL;
+ unsigned long flags;
+
+ mutex_lock(&cam->s_mutex);
+ if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ goto out;
+ if (buf->index < 0 || buf->index >= cam->n_sbufs)
+ goto out;
+ sbuf = cam->sb_bufs + buf->index;
+ if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED) {
+ ret = 0; /* Already queued?? */
+ goto out;
+ }
+ if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_DONE) {
+ /* Spec doesn't say anything, seems appropriate tho */
+ ret = -EBUSY;
+ goto out;
+ }
+ sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_QUEUED;
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ list_add(&sbuf->list, &cam->sb_avail);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+ ret = 0;
+ out:
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+static int cafe_vidioc_dqbuf(struct file *filp, void *priv,
+ struct v4l2_buffer *buf)
+{
+ struct cafe_camera *cam = filp->private_data;
+ struct cafe_sio_buffer *sbuf;
+ int ret = -EINVAL;
+ unsigned long flags;
+
+ mutex_lock(&cam->s_mutex);
+ if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ goto out_unlock;
+ if (cam->state != S_STREAMING)
+ goto out_unlock;
+ if (list_empty(&cam->sb_full) && filp->f_flags & O_NONBLOCK) {
+ ret = -EAGAIN;
+ goto out_unlock;
+ }
+
+ while (list_empty(&cam->sb_full) && cam->state == S_STREAMING) {
+ mutex_unlock(&cam->s_mutex);
+ if (wait_event_interruptible(cam->iowait,
+ !list_empty(&cam->sb_full))) {
+ ret = -ERESTARTSYS;
+ goto out;
+ }
+ mutex_lock(&cam->s_mutex);
+ }
+
+ if (cam->state != S_STREAMING)
+ ret = -EINTR;
+ else {
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ /* Should probably recheck !list_empty() here */
+ sbuf = list_entry(cam->sb_full.next,
+ struct cafe_sio_buffer, list);
+ list_del_init(&sbuf->list);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+ sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_DONE;
+ *buf = sbuf->v4lbuf;
+ ret = 0;
+ }
+
+ out_unlock:
+ mutex_unlock(&cam->s_mutex);
+ out:
+ return ret;
+}
+
+
+
+static void cafe_v4l_vm_open(struct vm_area_struct *vma)
+{
+ struct cafe_sio_buffer *sbuf = vma->vm_private_data;
+ /*
+ * Locking: done under mmap_sem, so we don't need to
+ * go back to the camera lock here.
+ */
+ sbuf->mapcount++;
+}
+
+
+static void cafe_v4l_vm_close(struct vm_area_struct *vma)
+{
+ struct cafe_sio_buffer *sbuf = vma->vm_private_data;
+
+ mutex_lock(&sbuf->cam->s_mutex);
+ sbuf->mapcount--;
+ /* Docs say we should stop I/O too... */
+ if (sbuf->mapcount == 0)
+ sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED;
+ mutex_unlock(&sbuf->cam->s_mutex);
+}
+
+static struct vm_operations_struct cafe_v4l_vm_ops = {
+ .open = cafe_v4l_vm_open,
+ .close = cafe_v4l_vm_close
+};
+
+
+static int cafe_v4l_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ struct cafe_camera *cam = filp->private_data;
+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ int ret = -EINVAL;
+ int i;
+ struct cafe_sio_buffer *sbuf = NULL;
+
+ if (! (vma->vm_flags & VM_WRITE) || ! (vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+ /*
+ * Find the buffer they are looking for.
+ */
+ mutex_lock(&cam->s_mutex);
+ for (i = 0; i < cam->n_sbufs; i++)
+ if (cam->sb_bufs[i].v4lbuf.m.offset == offset) {
+ sbuf = cam->sb_bufs + i;
+ break;
+ }
+ if (sbuf == NULL)
+ goto out;
+
+ ret = remap_vmalloc_range(vma, sbuf->buffer, 0);
+ if (ret)
+ goto out;
+ vma->vm_flags |= VM_DONTEXPAND;
+ vma->vm_private_data = sbuf;
+ vma->vm_ops = &cafe_v4l_vm_ops;
+ sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_MAPPED;
+ cafe_v4l_vm_open(vma);
+ ret = 0;
+ out:
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+
+
+static int cafe_v4l_open(struct inode *inode, struct file *filp)
+{
+ struct cafe_camera *cam;
+
+ cam = cafe_find_dev(iminor(inode));
+ if (cam == NULL)
+ return -ENODEV;
+ filp->private_data = cam;
+
+ mutex_lock(&cam->s_mutex);
+ if (cam->users == 0) {
+ cafe_ctlr_power_up(cam);
+ __cafe_cam_reset(cam);
+ cafe_set_config_needed(cam, 1);
+ /* FIXME make sure this is complete */
+ }
+ (cam->users)++;
+ mutex_unlock(&cam->s_mutex);
+ return 0;
+}
+
+
+static int cafe_v4l_release(struct inode *inode, struct file *filp)
+{
+ struct cafe_camera *cam = filp->private_data;
+
+ mutex_lock(&cam->s_mutex);
+ (cam->users)--;
+ if (filp == cam->owner) {
+ cafe_ctlr_stop_dma(cam);
+ cafe_free_sio_buffers(cam);
+ cam->owner = NULL;
+ }
+ if (cam->users == 0) {
+ cafe_ctlr_power_down(cam);
+ if (! alloc_bufs_at_load)
+ cafe_free_dma_bufs(cam);
+ }
+ mutex_unlock(&cam->s_mutex);
+ return 0;
+}
+
+
+
+static unsigned int cafe_v4l_poll(struct file *filp,
+ struct poll_table_struct *pt)
+{
+ struct cafe_camera *cam = filp->private_data;
+
+ poll_wait(filp, &cam->iowait, pt);
+ if (cam->next_buf >= 0)
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+
+
+static int cafe_vidioc_queryctrl(struct file *filp, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ struct cafe_camera *cam = filp->private_data;
+ int ret;
+
+ mutex_lock(&cam->s_mutex);
+ ret = __cafe_cam_cmd(cam, VIDIOC_QUERYCTRL, qc);
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+
+static int cafe_vidioc_g_ctrl(struct file *filp, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct cafe_camera *cam = filp->private_data;
+ int ret;
+
+ mutex_lock(&cam->s_mutex);
+ ret = __cafe_cam_cmd(cam, VIDIOC_G_CTRL, ctrl);
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+
+static int cafe_vidioc_s_ctrl(struct file *filp, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct cafe_camera *cam = filp->private_data;
+ int ret;
+
+ mutex_lock(&cam->s_mutex);
+ ret = __cafe_cam_cmd(cam, VIDIOC_S_CTRL, ctrl);
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+
+
+
+
+static int cafe_vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ strcpy(cap->driver, "cafe_ccic");
+ strcpy(cap->card, "cafe_ccic");
+ cap->version = CAFE_VERSION;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+ return 0;
+}
+
+
+/*
+ * The default format we use until somebody says otherwise.
+ */
+static struct v4l2_pix_format cafe_def_pix_format = {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .pixelformat = V4L2_PIX_FMT_YUYV,
+ .field = V4L2_FIELD_NONE,
+ .bytesperline = VGA_WIDTH*2,
+ .sizeimage = VGA_WIDTH*VGA_HEIGHT*2,
+};
+
+static int cafe_vidioc_enum_fmt_cap(struct file *filp,
+ void *priv, struct v4l2_fmtdesc *fmt)
+{
+ struct cafe_camera *cam = priv;
+ int ret;
+
+ if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ mutex_lock(&cam->s_mutex);
+ ret = __cafe_cam_cmd(cam, VIDIOC_ENUM_FMT, fmt);
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+
+static int cafe_vidioc_try_fmt_cap (struct file *filp, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct cafe_camera *cam = priv;
+ int ret;
+
+ mutex_lock(&cam->s_mutex);
+ ret = __cafe_cam_cmd(cam, VIDIOC_TRY_FMT, fmt);
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+static int cafe_vidioc_s_fmt_cap(struct file *filp, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct cafe_camera *cam = priv;
+ int ret;
+
+ /*
+ * Can't do anything if the device is not idle
+ * Also can't if there are streaming buffers in place.
+ */
+ if (cam->state != S_IDLE || cam->n_sbufs > 0)
+ return -EBUSY;
+ /*
+ * See if the formatting works in principle.
+ */
+ ret = cafe_vidioc_try_fmt_cap(filp, priv, fmt);
+ if (ret)
+ return ret;
+ /*
+ * Now we start to change things for real, so let's do it
+ * under lock.
+ */
+ mutex_lock(&cam->s_mutex);
+ cam->pix_format = fmt->fmt.pix;
+ /*
+ * Make sure we have appropriate DMA buffers.
+ */
+ ret = -ENOMEM;
+ if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage)
+ cafe_free_dma_bufs(cam);
+ if (cam->nbufs == 0) {
+ if (cafe_alloc_dma_bufs(cam, 0))
+ goto out;
+ }
+ /*
+ * It looks like this might work, so let's program the sensor.
+ */
+ ret = cafe_cam_configure(cam);
+ if (! ret)
+ ret = cafe_ctlr_configure(cam);
+ out:
+ mutex_unlock(&cam->s_mutex);
+ return ret;
+}
+
+/*
+ * Return our stored notion of how the camera is/should be configured.
+ * The V4l2 spec wants us to be smarter, and actually get this from
+ * the camera (and not mess with it at open time). Someday.
+ */
+static int cafe_vidioc_g_fmt_cap(struct file *filp, void *priv,
+ struct v4l2_format *f)
+{
+ struct cafe_camera *cam = priv;
+
+ f->fmt.pix = cam->pix_format;
+ return 0;
+}
+
+/*
+ * We only have one input - the sensor - so minimize the nonsense here.
+ */
+static int cafe_vidioc_enum_input(struct file *filp, void *priv,
+ struct v4l2_input *input)
+{
+ if (input->index != 0)
+ return -EINVAL;
+
+ input->type = V4L2_INPUT_TYPE_CAMERA;
+ input->std = V4L2_STD_ALL; /* Not sure what should go here */
+ strcpy(input->name, "Camera");
+ return 0;
+}
+
+static int cafe_vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
+{
+ *i = 0;
+ return 0;
+}
+
+static int cafe_vidioc_s_input(struct file *filp, void *priv, unsigned int i)
+{
+ if (i != 0)
+ return -EINVAL;
+ return 0;
+}
+
+/* from vivi.c */
+static int cafe_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a)
+{
+ return 0;
+}
+
+/*
+ * G/S_PARM. Most of this is done by the sensor, but we are
+ * the level which controls the number of read buffers.
+ */
+static int cafe_vidioc_g_parm(struct file *filp, void *priv,
+ struct v4l2_streamparm *parms)
+{
+ struct cafe_camera *cam = priv;
+ int ret;
+
+ mutex_lock(&cam->s_mutex);
+ ret = __cafe_cam_cmd(cam, VIDIOC_G_PARM, parms);
+ mutex_unlock(&cam->s_mutex);
+ parms->parm.capture.readbuffers = n_dma_bufs;
+ return ret;
+}
+
+static int cafe_vidioc_s_parm(struct file *filp, void *priv,
+ struct v4l2_streamparm *parms)
+{
+ struct cafe_camera *cam = priv;
+ int ret;
+
+ mutex_lock(&cam->s_mutex);
+ ret = __cafe_cam_cmd(cam, VIDIOC_S_PARM, parms);
+ mutex_unlock(&cam->s_mutex);
+ parms->parm.capture.readbuffers = n_dma_bufs;
+ return ret;
+}
+
+
+static void cafe_v4l_dev_release(struct video_device *vd)
+{
+ struct cafe_camera *cam = container_of(vd, struct cafe_camera, v4ldev);
+
+ kfree(cam);
+}
+
+
+/*
+ * This template device holds all of those v4l2 methods; we
+ * clone it for specific real devices.
+ */
+
+static struct file_operations cafe_v4l_fops = {
+ .owner = THIS_MODULE,
+ .open = cafe_v4l_open,
+ .release = cafe_v4l_release,
+ .read = cafe_v4l_read,
+ .poll = cafe_v4l_poll,
+ .mmap = cafe_v4l_mmap,
+ .ioctl = video_ioctl2,
+ .llseek = no_llseek,
+};
+
+static struct video_device cafe_v4l_template = {
+ .name = "cafe",
+ .type = VFL_TYPE_GRABBER,
+ .type2 = VID_TYPE_CAPTURE,
+ .minor = -1, /* Get one dynamically */
+ .tvnorms = V4L2_STD_NTSC_M,
+ .current_norm = V4L2_STD_NTSC_M, /* make mplayer happy */
+
+ .fops = &cafe_v4l_fops,
+ .release = cafe_v4l_dev_release,
+
+ .vidioc_querycap = cafe_vidioc_querycap,
+ .vidioc_enum_fmt_cap = cafe_vidioc_enum_fmt_cap,
+ .vidioc_try_fmt_cap = cafe_vidioc_try_fmt_cap,
+ .vidioc_s_fmt_cap = cafe_vidioc_s_fmt_cap,
+ .vidioc_g_fmt_cap = cafe_vidioc_g_fmt_cap,
+ .vidioc_enum_input = cafe_vidioc_enum_input,
+ .vidioc_g_input = cafe_vidioc_g_input,
+ .vidioc_s_input = cafe_vidioc_s_input,
+ .vidioc_s_std = cafe_vidioc_s_std,
+ .vidioc_reqbufs = cafe_vidioc_reqbufs,
+ .vidioc_querybuf = cafe_vidioc_querybuf,
+ .vidioc_qbuf = cafe_vidioc_qbuf,
+ .vidioc_dqbuf = cafe_vidioc_dqbuf,
+ .vidioc_streamon = cafe_vidioc_streamon,
+ .vidioc_streamoff = cafe_vidioc_streamoff,
+ .vidioc_queryctrl = cafe_vidioc_queryctrl,
+ .vidioc_g_ctrl = cafe_vidioc_g_ctrl,
+ .vidioc_s_ctrl = cafe_vidioc_s_ctrl,
+ .vidioc_g_parm = cafe_vidioc_g_parm,
+ .vidioc_s_parm = cafe_vidioc_s_parm,
+};
+
+
+
+
+
+
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Interrupt handler stuff
+ */
+
+
+
+static void cafe_frame_tasklet(unsigned long data)
+{
+ struct cafe_camera *cam = (struct cafe_camera *) data;
+ int i;
+ unsigned long flags;
+ struct cafe_sio_buffer *sbuf;
+
+ spin_lock_irqsave(&cam->dev_lock, flags);
+ for (i = 0; i < cam->nbufs; i++) {
+ int bufno = cam->next_buf;
+ if (bufno < 0) { /* "will never happen" */
+ cam_err(cam, "No valid bufs in tasklet!\n");
+ break;
+ }
+ if (++(cam->next_buf) >= cam->nbufs)
+ cam->next_buf = 0;
+ if (! test_bit(bufno, &cam->flags))
+ continue;
+ if (list_empty(&cam->sb_avail))
+ break; /* Leave it valid, hope for better later */
+ clear_bit(bufno, &cam->flags);
+ /*
+ * We could perhaps drop the spinlock during this
+ * big copy. Something to consider.
+ */
+ sbuf = list_entry(cam->sb_avail.next,
+ struct cafe_sio_buffer, list);
+ memcpy(sbuf->buffer, cam->dma_bufs[bufno],
+ cam->pix_format.sizeimage);
+ sbuf->v4lbuf.bytesused = cam->pix_format.sizeimage;
+ sbuf->v4lbuf.sequence = cam->buf_seq[bufno];
+ sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_QUEUED;
+ sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_DONE;
+ list_move_tail(&sbuf->list, &cam->sb_full);
+ }
+ if (! list_empty(&cam->sb_full))
+ wake_up(&cam->iowait);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+
+
+static void cafe_frame_complete(struct cafe_camera *cam, int frame)
+{
+ /*
+ * Basic frame housekeeping.
+ */
+ if (test_bit(frame, &cam->flags) && printk_ratelimit())
+ cam_err(cam, "Frame overrun on %d, frames lost\n", frame);
+ set_bit(frame, &cam->flags);
+ clear_bit(CF_DMA_ACTIVE, &cam->flags);
+ if (cam->next_buf < 0)
+ cam->next_buf = frame;
+ cam->buf_seq[frame] = ++(cam->sequence);
+
+ switch (cam->state) {
+ /*
+ * If in single read mode, try going speculative.
+ */
+ case S_SINGLEREAD:
+ cam->state = S_SPECREAD;
+ cam->specframes = 0;
+ wake_up(&cam->iowait);
+ break;
+
+ /*
+ * If we are already doing speculative reads, and nobody is
+ * reading them, just stop.
+ */
+ case S_SPECREAD:
+ if (++(cam->specframes) >= cam->nbufs) {
+ cafe_ctlr_stop(cam);
+ cafe_ctlr_irq_disable(cam);
+ cam->state = S_IDLE;
+ }
+ wake_up(&cam->iowait);
+ break;
+ /*
+ * For the streaming case, we defer the real work to the
+ * camera tasklet.
+ *
+ * FIXME: if the application is not consuming the buffers,
+ * we should eventually put things on hold and restart in
+ * vidioc_dqbuf().
+ */
+ case S_STREAMING:
+ tasklet_schedule(&cam->s_tasklet);
+ break;
+
+ default:
+ cam_err(cam, "Frame interrupt in non-operational state\n");
+ break;
+ }
+}
+
+
+
+
+static void cafe_frame_irq(struct cafe_camera *cam, unsigned int irqs)
+{
+ unsigned int frame;
+
+ cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */
+ /*
+ * Handle any frame completions. There really should
+ * not be more than one of these, or we have fallen
+ * far behind.
+ */
+ for (frame = 0; frame < cam->nbufs; frame++)
+ if (irqs & (IRQ_EOF0 << frame))
+ cafe_frame_complete(cam, frame);
+ /*
+ * If a frame starts, note that we have DMA active. This
+ * code assumes that we won't get multiple frame interrupts
+ * at once; may want to rethink that.
+ */
+ if (irqs & (IRQ_SOF0 | IRQ_SOF1 | IRQ_SOF2))
+ set_bit(CF_DMA_ACTIVE, &cam->flags);
+}
+
+
+
+static irqreturn_t cafe_irq(int irq, void *data)
+{
+ struct cafe_camera *cam = data;
+ unsigned int irqs;
+
+ spin_lock(&cam->dev_lock);
+ irqs = cafe_reg_read(cam, REG_IRQSTAT);
+ if ((irqs & ALLIRQS) == 0) {
+ spin_unlock(&cam->dev_lock);
+ return IRQ_NONE;
+ }
+ if (irqs & FRAMEIRQS)
+ cafe_frame_irq(cam, irqs);
+ if (irqs & TWSIIRQS) {
+ cafe_reg_write(cam, REG_IRQSTAT, TWSIIRQS);
+ wake_up(&cam->smbus_wait);
+ }
+ spin_unlock(&cam->dev_lock);
+ return IRQ_HANDLED;
+}
+
+
+/* -------------------------------------------------------------------------- */
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+/*
+ * Debugfs stuff.
+ */
+
+static char cafe_debug_buf[1024];
+static struct dentry *cafe_dfs_root;
+
+static void cafe_dfs_setup(void)
+{
+ cafe_dfs_root = debugfs_create_dir("cafe_ccic", NULL);
+ if (IS_ERR(cafe_dfs_root)) {
+ cafe_dfs_root = NULL; /* Never mind */
+ printk(KERN_NOTICE "cafe_ccic unable to set up debugfs\n");
+ }
+}
+
+static void cafe_dfs_shutdown(void)
+{
+ if (cafe_dfs_root)
+ debugfs_remove(cafe_dfs_root);
+}
+
+static int cafe_dfs_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t cafe_dfs_read_regs(struct file *file,
+ char __user *buf, size_t count, loff_t *ppos)
+{
+ struct cafe_camera *cam = file->private_data;
+ char *s = cafe_debug_buf;
+ int offset;
+
+ for (offset = 0; offset < 0x44; offset += 4)
+ s += sprintf(s, "%02x: %08x\n", offset,
+ cafe_reg_read(cam, offset));
+ for (offset = 0x88; offset <= 0x90; offset += 4)
+ s += sprintf(s, "%02x: %08x\n", offset,
+ cafe_reg_read(cam, offset));
+ for (offset = 0xb4; offset <= 0xbc; offset += 4)
+ s += sprintf(s, "%02x: %08x\n", offset,
+ cafe_reg_read(cam, offset));
+ for (offset = 0x3000; offset <= 0x300c; offset += 4)
+ s += sprintf(s, "%04x: %08x\n", offset,
+ cafe_reg_read(cam, offset));
+ return simple_read_from_buffer(buf, count, ppos, cafe_debug_buf,
+ s - cafe_debug_buf);
+}
+
+static struct file_operations cafe_dfs_reg_ops = {
+ .owner = THIS_MODULE,
+ .read = cafe_dfs_read_regs,
+ .open = cafe_dfs_open
+};
+
+static ssize_t cafe_dfs_read_cam(struct file *file,
+ char __user *buf, size_t count, loff_t *ppos)
+{
+ struct cafe_camera *cam = file->private_data;
+ char *s = cafe_debug_buf;
+ int offset;
+
+ if (! cam->sensor)
+ return -EINVAL;
+ for (offset = 0x0; offset < 0x8a; offset++)
+ {
+ u8 v;
+
+ cafe_smbus_read_data(cam, cam->sensor->addr, offset, &v);
+ s += sprintf(s, "%02x: %02x\n", offset, v);
+ }
+ return simple_read_from_buffer(buf, count, ppos, cafe_debug_buf,
+ s - cafe_debug_buf);
+}
+
+static struct file_operations cafe_dfs_cam_ops = {
+ .owner = THIS_MODULE,
+ .read = cafe_dfs_read_cam,
+ .open = cafe_dfs_open
+};
+
+
+
+static void cafe_dfs_cam_setup(struct cafe_camera *cam)
+{
+ char fname[40];
+
+ if (!cafe_dfs_root)
+ return;
+ sprintf(fname, "regs-%d", cam->v4ldev.minor);
+ cam->dfs_regs = debugfs_create_file(fname, 0444, cafe_dfs_root,
+ cam, &cafe_dfs_reg_ops);
+ sprintf(fname, "cam-%d", cam->v4ldev.minor);
+ cam->dfs_cam_regs = debugfs_create_file(fname, 0444, cafe_dfs_root,
+ cam, &cafe_dfs_cam_ops);
+}
+
+
+static void cafe_dfs_cam_shutdown(struct cafe_camera *cam)
+{
+ if (! IS_ERR(cam->dfs_regs))
+ debugfs_remove(cam->dfs_regs);
+ if (! IS_ERR(cam->dfs_cam_regs))
+ debugfs_remove(cam->dfs_cam_regs);
+}
+
+#else
+
+#define cafe_dfs_setup()
+#define cafe_dfs_shutdown()
+#define cafe_dfs_cam_setup(cam)
+#define cafe_dfs_cam_shutdown(cam)
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
+
+
+
+
+/* ------------------------------------------------------------------------*/
+/*
+ * PCI interface stuff.
+ */
+
+static int cafe_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int ret;
+ u16 classword;
+ struct cafe_camera *cam;
+ /*
+ * Make sure we have a camera here - we'll get calls for
+ * the other cafe devices as well.
+ */
+ pci_read_config_word(pdev, PCI_CLASS_DEVICE, &classword);
+ if (classword != PCI_CLASS_MULTIMEDIA_VIDEO)
+ return -ENODEV;
+ /*
+ * Start putting together one of our big camera structures.
+ */
+ ret = -ENOMEM;
+ cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL);
+ if (cam == NULL)
+ goto out;
+ mutex_init(&cam->s_mutex);
+ mutex_lock(&cam->s_mutex);
+ spin_lock_init(&cam->dev_lock);
+ cam->state = S_NOTREADY;
+ cafe_set_config_needed(cam, 1);
+ init_waitqueue_head(&cam->smbus_wait);
+ init_waitqueue_head(&cam->iowait);
+ cam->pdev = pdev;
+ cam->pix_format = cafe_def_pix_format;
+ INIT_LIST_HEAD(&cam->dev_list);
+ INIT_LIST_HEAD(&cam->sb_avail);
+ INIT_LIST_HEAD(&cam->sb_full);
+ tasklet_init(&cam->s_tasklet, cafe_frame_tasklet, (unsigned long) cam);
+ /*
+ * Get set up on the PCI bus.
+ */
+ ret = pci_enable_device(pdev);
+ if (ret)
+ goto out_free;
+ pci_set_master(pdev);
+
+ ret = -EIO;
+ cam->regs = pci_iomap(pdev, 0, 0);
+ if (! cam->regs) {
+ printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n");
+ goto out_free;
+ }
+ ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam);
+ if (ret)
+ goto out_iounmap;
+ cafe_ctlr_init(cam);
+ cafe_ctlr_power_up(cam);
+ /*
+ * Set up I2C/SMBUS communications
+ */
+ mutex_unlock(&cam->s_mutex); /* attach can deadlock */
+ ret = cafe_smbus_setup(cam);
+ if (ret)
+ goto out_freeirq;
+ /*
+ * Get the v4l2 setup done.
+ */
+ mutex_lock(&cam->s_mutex);
+ cam->v4ldev = cafe_v4l_template;
+ cam->v4ldev.debug = 0;
+// cam->v4ldev.debug = V4L2_DEBUG_IOCTL_ARG;
+ ret = video_register_device(&cam->v4ldev, VFL_TYPE_GRABBER, -1);
+ if (ret)
+ goto out_smbus;
+ /*
+ * If so requested, try to get our DMA buffers now.
+ */
+ if (alloc_bufs_at_load) {
+ if (cafe_alloc_dma_bufs(cam, 1))
+ cam_warn(cam, "Unable to alloc DMA buffers at load"
+ " will try again later.");
+ }
+
+ cafe_dfs_cam_setup(cam);
+ mutex_unlock(&cam->s_mutex);
+ cafe_add_dev(cam);
+ return 0;
+
+ out_smbus:
+ cafe_smbus_shutdown(cam);
+ out_freeirq:
+ cafe_ctlr_power_down(cam);
+ free_irq(pdev->irq, cam);
+ out_iounmap:
+ pci_iounmap(pdev, cam->regs);
+ out_free:
+ kfree(cam);
+ out:
+ return ret;
+}
+
+
+/*
+ * Shut down an initialized device
+ */
+static void cafe_shutdown(struct cafe_camera *cam)
+{
+/* FIXME: Make sure we take care of everything here */
+ cafe_dfs_cam_shutdown(cam);
+ if (cam->n_sbufs > 0)
+ /* What if they are still mapped? Shouldn't be, but... */
+ cafe_free_sio_buffers(cam);
+ cafe_remove_dev(cam);
+ cafe_ctlr_stop_dma(cam);
+ cafe_ctlr_power_down(cam);
+ cafe_smbus_shutdown(cam);
+ cafe_free_dma_bufs(cam);
+ free_irq(cam->pdev->irq, cam);
+ pci_iounmap(cam->pdev, cam->regs);
+ video_unregister_device(&cam->v4ldev);
+ /* kfree(cam); done in v4l_release () */
+}
+
+
+static void cafe_pci_remove(struct pci_dev *pdev)
+{
+ struct cafe_camera *cam = cafe_find_by_pdev(pdev);
+
+ if (cam == NULL) {
+ cam_warn(cam, "pci_remove on unknown pdev %p\n", pdev);
+ return;
+ }
+ mutex_lock(&cam->s_mutex);
+ if (cam->users > 0)
+ cam_warn(cam, "Removing a device with users!\n");
+ cafe_shutdown(cam);
+/* No unlock - it no longer exists */
+}
+
+
+
+
+static struct pci_device_id cafe_ids[] = {
+ { PCI_DEVICE(0x1148, 0x4340) }, /* Temporary ID on devel board */
+ { PCI_DEVICE(0x11ab, 0x4100) }, /* Eventual real ID */
+ { PCI_DEVICE(0x11ab, 0x4102) }, /* Really eventual real ID */
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, cafe_ids);
+
+static struct pci_driver cafe_pci_driver = {
+ .name = "cafe1000-ccic",
+ .id_table = cafe_ids,
+ .probe = cafe_pci_probe,
+ .remove = cafe_pci_remove,
+};
+
+
+
+
+static int __init cafe_init(void)
+{
+ int ret;
+
+ printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n",
+ CAFE_VERSION);
+ cafe_dfs_setup();
+ ret = pci_register_driver(&cafe_pci_driver);
+ if (ret) {
+ printk(KERN_ERR "Unable to register cafe_ccic driver\n");
+ goto out;
+ }
+ request_module("ov7670"); /* FIXME want something more general */
+ ret = 0;
+
+ out:
+ return ret;
+}
+
+
+static void __exit cafe_exit(void)
+{
+ pci_unregister_driver(&cafe_pci_driver);
+ cafe_dfs_shutdown();
+}
+
+module_init(cafe_init);
+module_exit(cafe_exit);
ret = file->f_op->unlocked_ioctl(file, cmd, arg);
else if (file->f_op->ioctl) {
lock_kernel();
- ret = file->f_op->ioctl(file->f_dentry->d_inode, file, cmd, arg);
+ ret = file->f_op->ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
unlock_kernel();
}
select DVB_OR51132 if !DVB_FE_CUSTOMISE
select DVB_CX22702 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
select DVB_NXT200X if !DVB_FE_CUSTOMISE
select DVB_CX24123 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
#define dprintk(level,fmt, arg...) if (debug >= level) \
printk(KERN_DEBUG "%s/2-bb: " fmt, dev->core->name , ## arg)
-static LIST_HEAD(cx8802_devlist);
/* ------------------------------------------------------------------ */
BLACKBIRD_MPEG_CAPTURE,
BLACKBIRD_RAW_BITS_NONE);
- cx88_do_ioctl(inode, file, 0, dev->core, cmd, arg, mpeg_do_ioctl);
+ cx88_do_ioctl(inode, file, 0, dev->core, cmd, arg, cx88_ioctl_hook);
blackbird_initialize_codec(dev);
cx88_set_scale(dev->core, dev->width, dev->height,
}
default:
- return cx88_do_ioctl(inode, file, 0, dev->core, cmd, arg, mpeg_do_ioctl);
+ return cx88_do_ioctl(inode, file, 0, dev->core, cmd, arg, cx88_ioctl_hook);
}
return 0;
}
+int (*cx88_ioctl_hook)(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg);
+unsigned int (*cx88_ioctl_translator)(unsigned int cmd);
+
static unsigned int mpeg_translate_ioctl(unsigned int cmd)
{
return cmd;
static int mpeg_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
- cmd = mpeg_translate_ioctl( cmd );
- return video_usercopy(inode, file, cmd, arg, mpeg_do_ioctl);
+ cmd = cx88_ioctl_translator( cmd );
+ return video_usercopy(inode, file, cmd, arg, cx88_ioctl_hook);
}
static int mpeg_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
- struct cx8802_dev *h,*dev = NULL;
+ struct cx8802_dev *dev = NULL;
struct cx8802_fh *fh;
- struct list_head *list;
+ struct cx8802_driver *drv = NULL;
+ int err;
- list_for_each(list,&cx8802_devlist) {
- h = list_entry(list, struct cx8802_dev, devlist);
- if (h->mpeg_dev->minor == minor)
- dev = h;
- }
- if (NULL == dev)
+ dev = cx8802_get_device(inode);
+
+ dprintk( 1, "%s\n", __FUNCTION__);
+
+ if (dev == NULL)
return -ENODEV;
- if (blackbird_initialize_codec(dev) < 0)
+ /* Make sure we can acquire the hardware */
+ drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD);
+ if (drv) {
+ err = drv->request_acquire(drv);
+ if(err != 0) {
+ dprintk(1,"%s: Unable to acquire hardware, %d\n", __FUNCTION__, err);
+ return err;
+ }
+ }
+
+ if (blackbird_initialize_codec(dev) < 0) {
+ if (drv)
+ drv->request_release(drv);
return -EINVAL;
+ }
dprintk(1,"open minor=%d\n",minor);
/* allocate + initialize per filehandle data */
fh = kzalloc(sizeof(*fh),GFP_KERNEL);
- if (NULL == fh)
+ if (NULL == fh) {
+ if (drv)
+ drv->request_release(drv);
return -ENOMEM;
+ }
file->private_data = fh;
fh->dev = dev;
static int mpeg_release(struct inode *inode, struct file *file)
{
struct cx8802_fh *fh = file->private_data;
+ struct cx8802_dev *dev = NULL;
+ struct cx8802_driver *drv = NULL;
/* blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, BLACKBIRD_END_NOW, 0, 0x13); */
blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0,
videobuf_mmap_free(&fh->mpegq);
file->private_data = NULL;
kfree(fh);
+
+ /* Make sure we release the hardware */
+ dev = cx8802_get_device(inode);
+ if (dev == NULL)
+ return -ENODEV;
+
+ drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD);
+ if (drv)
+ drv->request_release(drv);
+
return 0;
}
/* ------------------------------------------------------------------ */
+/* The CX8802 MPEG API will call this when we can use the hardware */
+static int cx8802_blackbird_advise_acquire(struct cx8802_driver *drv)
+{
+ struct cx88_core *core = drv->core;
+ int err = 0;
+
+ switch (core->board) {
+ case CX88_BOARD_HAUPPAUGE_HVR1300:
+ /* By default, core setup will leave the cx22702 out of reset, on the bus.
+ * We left the hardware on power up with the cx22702 active.
+ * We're being given access to re-arrange the GPIOs.
+ * Take the bus off the cx22702 and put the cx23416 on it.
+ */
+ cx_clear(MO_GP0_IO, 0x00000080); /* cx22702 in reset */
+ cx_set(MO_GP0_IO, 0x00000004); /* Disable the cx22702 */
+ break;
+ default:
+ err = -ENODEV;
+ }
+ return err;
+}
+
+/* The CX8802 MPEG API will call this when we need to release the hardware */
+static int cx8802_blackbird_advise_release(struct cx8802_driver *drv)
+{
+ struct cx88_core *core = drv->core;
+ int err = 0;
+
+ switch (core->board) {
+ case CX88_BOARD_HAUPPAUGE_HVR1300:
+ /* Exit leaving the cx23416 on the bus */
+ break;
+ default:
+ err = -ENODEV;
+ }
+ return err;
+}
+
static void blackbird_unregister_video(struct cx8802_dev *dev)
{
if (dev->mpeg_dev) {
/* ----------------------------------------------------------- */
-static int __devinit blackbird_probe(struct pci_dev *pci_dev,
- const struct pci_device_id *pci_id)
+static int cx8802_blackbird_probe(struct cx8802_driver *drv)
{
- struct cx8802_dev *dev;
- struct cx88_core *core;
+ struct cx88_core *core = drv->core;
+ struct cx8802_dev *dev = core->dvbdev;
int err;
- /* general setup */
- core = cx88_core_get(pci_dev);
- if (NULL == core)
- return -EINVAL;
+ dprintk( 1, "%s\n", __FUNCTION__);
+ dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
+ core->board,
+ core->name,
+ core->pci_bus,
+ core->pci_slot);
err = -ENODEV;
if (!(cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD))
goto fail_core;
- err = -ENOMEM;
- dev = kzalloc(sizeof(*dev),GFP_KERNEL);
- if (NULL == dev)
- goto fail_core;
- dev->pci = pci_dev;
- dev->core = core;
dev->width = 720;
dev->height = 576;
cx2341x_fill_defaults(&dev->params);
dev->height = 576;
}
- err = cx8802_init_common(dev);
- if (0 != err)
- goto fail_free;
-
/* blackbird stuff */
printk("%s/2: cx23416 based mpeg encoder (blackbird reference design)\n",
core->name);
host_setup(dev->core);
- list_add_tail(&dev->devlist,&cx8802_devlist);
blackbird_register_video(dev);
/* initial device configuration: needed ? */
return 0;
- fail_free:
- kfree(dev);
fail_core:
- cx88_core_put(core,pci_dev);
return err;
}
-static void __devexit blackbird_remove(struct pci_dev *pci_dev)
+static int cx8802_blackbird_remove(struct cx8802_driver *drv)
{
- struct cx8802_dev *dev = pci_get_drvdata(pci_dev);
-
/* blackbird */
- blackbird_unregister_video(dev);
- list_del(&dev->devlist);
+ blackbird_unregister_video(drv->core->dvbdev);
- /* common */
- cx8802_fini_common(dev);
- cx88_core_put(dev->core,dev->pci);
- kfree(dev);
+ return 0;
}
-static struct pci_device_id cx8802_pci_tbl[] = {
- {
- .vendor = 0x14f1,
- .device = 0x8802,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- },{
- /* --- end of list --- */
- }
-};
-MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl);
-
-static struct pci_driver blackbird_pci_driver = {
- .name = "cx88-blackbird",
- .id_table = cx8802_pci_tbl,
- .probe = blackbird_probe,
- .remove = __devexit_p(blackbird_remove),
-#ifdef CONFIG_PM
- .suspend = cx8802_suspend_common,
- .resume = cx8802_resume_common,
-#endif
+static struct cx8802_driver cx8802_blackbird_driver = {
+ .type_id = CX88_MPEG_BLACKBIRD,
+ .hw_access = CX8802_DRVCTL_SHARED,
+ .probe = cx8802_blackbird_probe,
+ .remove = cx8802_blackbird_remove,
+ .advise_acquire = cx8802_blackbird_advise_acquire,
+ .advise_release = cx8802_blackbird_advise_release,
};
static int blackbird_init(void)
printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
#endif
- return pci_register_driver(&blackbird_pci_driver);
+ cx88_ioctl_hook = mpeg_do_ioctl;
+ cx88_ioctl_translator = mpeg_translate_ioctl;
+ return cx8802_register_driver(&cx8802_blackbird_driver);
}
static void blackbird_fini(void)
{
- pci_unregister_driver(&blackbird_pci_driver);
+ cx8802_unregister_driver(&cx8802_blackbird_driver);
}
module_init(blackbird_init);
module_exit(blackbird_fini);
+EXPORT_SYMBOL(cx88_ioctl_hook);
+EXPORT_SYMBOL(cx88_ioctl_translator);
+
/* ----------------------------------------------------------- */
/*
* Local variables:
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x0000bde2,
+ .extadc = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x0000bde6,
+ .extadc = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0000bde6,
+ .extadc = 1,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x0000bd62,
+ .extadc = 1,
},
.mpeg = CX88_MPEG_BLACKBIRD,
},
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0000fde6, // 0x0000fda6 L,R RCA audio in?
+ .extadc = 1,
}},
.radio = {
.type = CX88_RADIO,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
+ .extadc = 1,
}},
.mpeg = CX88_MPEG_BLACKBIRD,
},
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00009d80,
+ .extadc = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00009d76,
+ .extadc = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00009d76,
+ .extadc = 1,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x00009d00,
+ .extadc = 1,
},
.mpeg = CX88_MPEG_BLACKBIRD,
},
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
- .mpeg = CX88_MPEG_BLACKBIRD,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 0,
.gpio0 = 0x0000cd73,
+ .extadc = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 1,
.gpio0 = 0x0000cd73,
+ .extadc = 1,
},{
.type = CX88_VMUX_TELEVISION,
.vmux = 3,
.gpio0 = 0x0000cdb3,
+ .extadc = 1,
}},
.radio = {
.type = CX88_RADIO,
.vmux = 2,
.gpio0 = 0x0000cdf3,
+ .extadc = 1,
},
+ .mpeg = CX88_MPEG_BLACKBIRD,
},
[CX88_BOARD_KWORLD_VSTREAM_EXPERT_DVD] = {
/* Alexander Wold <awold@bigfoot.com> */
.mpeg = CX88_MPEG_DVB,
},
[CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT] = {
- /* FIXME: Audio not working for s-video / composite inputs. */
.name = "KWorld HardwareMpegTV XPert",
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x3de6,
+ .extadc = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x3de6,
+ .extadc = 1,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x070b,
}},
},
- [CX88_BOARD_TE_DTV_250_OEM_SWANN] = {
- .name = "Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM",
- .tuner_type = TUNER_LG_PAL_NEW_TAPC,
- .radio_type = UNSET,
- .tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
- .input = {{
- .type = CX88_VMUX_TELEVISION,
- .vmux = 0,
- .gpio0 = 0x003fffff,
- .gpio1 = 0x00e00000,
- .gpio2 = 0x003fffff,
- .gpio3 = 0x02000000,
- },{
- .type = CX88_VMUX_COMPOSITE1,
- .vmux = 1,
- .gpio0 = 0x003fffff,
- .gpio1 = 0x00e00000,
- .gpio2 = 0x003fffff,
- .gpio3 = 0x02000000,
- },{
- .type = CX88_VMUX_SVIDEO,
- .vmux = 2,
- .gpio0 = 0x003fffff,
- .gpio1 = 0x00e00000,
- .gpio2 = 0x003fffff,
- .gpio3 = 0x02000000,
- }},
- },
+ [CX88_BOARD_TE_DTV_250_OEM_SWANN] = {
+ .name = "Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM",
+ .tuner_type = TUNER_LG_PAL_NEW_TAPC,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x003fffff,
+ .gpio1 = 0x00e00000,
+ .gpio2 = 0x003fffff,
+ .gpio3 = 0x02000000,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x003fffff,
+ .gpio1 = 0x00e00000,
+ .gpio2 = 0x003fffff,
+ .gpio3 = 0x02000000,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x003fffff,
+ .gpio1 = 0x00e00000,
+ .gpio2 = 0x003fffff,
+ .gpio3 = 0x02000000,
+ }},
+ },
[CX88_BOARD_HAUPPAUGE_HVR1300] = {
.name = "Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder",
.tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xe780,
+ .extadc = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xe780,
+ .extadc = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xe780,
+ .extadc = 1,
}},
/* fixme: Add radio support */
- .mpeg = CX88_MPEG_DVB,
+ .mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD,
},
};
const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
},{
.subvendor = 0x17de,
.subdevice = 0x0840,
+ .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT,
+ },{
+ .subvendor = 0x1421,
+ .subdevice = 0x0305,
.card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT,
},{
.subvendor = 0x18ac,
mutex_lock(&devlist);
cx88_ir_fini(core);
if (0 == core->i2c_rc)
- i2c_bit_del_bus(&core->i2c_adap);
+ i2c_del_adapter(&core->i2c_adap);
list_del(&core->devlist);
iounmap(core->lmmio);
cx88_devcount--;
#include "cx22702.h"
#include "or51132.h"
#include "lgdt330x.h"
-#include "lg_h06xf.h"
+#include "lgh06xf.h"
#include "nxt200x.h"
#include "cx24123.h"
#include "isl6421.h"
MODULE_PARM_DESC(debug,"enable debug messages [dvb]");
#define dprintk(level,fmt, arg...) if (debug >= level) \
- printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->core->name , ## arg)
+ printk(KERN_DEBUG "%s/2-dvb: " fmt, core->name, ## arg)
/* ------------------------------------------------------------------ */
return 0;
}
-static int dvb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
- enum v4l2_field field)
+static int dvb_buf_prepare(struct videobuf_queue *q,
+ struct videobuf_buffer *vb, enum v4l2_field field)
{
struct cx8802_dev *dev = q->priv_data;
return cx8802_buf_prepare(q, dev, (struct cx88_buffer*)vb,field);
cx8802_buf_queue(dev, (struct cx88_buffer*)vb);
}
-static void dvb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+static void dvb_buf_release(struct videobuf_queue *q,
+ struct videobuf_buffer *vb)
{
cx88_free_buffer(q, (struct cx88_buffer*)vb);
}
};
/* ------------------------------------------------------------------ */
+
+static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire)
+{
+ struct cx8802_dev *dev= fe->dvb->priv;
+ struct cx8802_driver *drv = NULL;
+ int ret = 0;
+
+ drv = cx8802_get_driver(dev, CX88_MPEG_DVB);
+ if (drv) {
+ if (acquire)
+ ret = drv->request_acquire(drv);
+ else
+ ret = drv->request_release(drv);
+ }
+
+ return ret;
+}
+
+/* ------------------------------------------------------------------ */
+
static int dvico_fusionhdtv_demod_init(struct dvb_frontend* fe)
{
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x39 };
};
#endif
-static int dvico_hybrid_tuner_set_params(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params)
-{
- u8 pllbuf[4];
- struct cx8802_dev *dev= fe->dvb->priv;
- struct i2c_msg msg =
- { .addr = dev->core->pll_addr, .flags = 0,
- .buf = pllbuf, .len = 4 };
- int err;
-
- dvb_pll_configure(dev->core->pll_desc, pllbuf,
- params->frequency,
- params->u.ofdm.bandwidth);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
- printk(KERN_WARNING "cx88-dvb: %s error "
- "(addr %02x <- %02x, err = %i)\n",
- __FUNCTION__, pllbuf[0], pllbuf[1], err);
- if (err < 0)
- return err;
- else
- return -EREMOTEIO;
- }
-
- return 0;
-}
-
static struct zl10353_config dvico_fusionhdtv_hybrid = {
.demod_address = 0x0f,
.no_tuner = 1,
.output_mode = CX22702_SERIAL_OUTPUT,
};
-static struct cx22702_config hauppauge_novat_config = {
- .demod_address = 0x43,
- .output_mode = CX22702_SERIAL_OUTPUT,
-};
-
-static struct cx22702_config hauppauge_hvr1100_config = {
+static struct cx22702_config hauppauge_hvr_config = {
.demod_address = 0x63,
.output_mode = CX22702_SERIAL_OUTPUT,
};
-static struct cx22702_config hauppauge_hvr1300_config = {
- .demod_address = 0x63,
- .output_mode = CX22702_SERIAL_OUTPUT,
-};
-
-static struct cx22702_config hauppauge_hvr3000_config = {
- .demod_address = 0x63,
- .output_mode = CX22702_SERIAL_OUTPUT,
-};
-
-static int or51132_set_ts_param(struct dvb_frontend* fe,
- int is_punctured)
+static int or51132_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
.set_ts_params = or51132_set_ts_param,
};
-static int lgdt3302_tuner_set_params(struct dvb_frontend* fe,
- struct dvb_frontend_parameters* params)
-{
- /* FIXME make this routine use the tuner-simple code.
- * It could probably be shared with a number of ATSC
- * frontends. Many share the same tuner with analog TV. */
-
- struct cx8802_dev *dev= fe->dvb->priv;
- struct cx88_core *core = dev->core;
- u8 buf[4];
- struct i2c_msg msg =
- { .addr = dev->core->pll_addr, .flags = 0, .buf = buf, .len = 4 };
- int err;
-
- dvb_pll_configure(core->pll_desc, buf, params->frequency, 0);
- dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
- __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if ((err = i2c_transfer(&core->i2c_adap, &msg, 1)) != 1) {
- printk(KERN_WARNING "cx88-dvb: %s error "
- "(addr %02x <- %02x, err = %i)\n",
- __FUNCTION__, buf[0], buf[1], err);
- if (err < 0)
- return err;
- else
- return -EREMOTEIO;
- }
- return 0;
-}
-
-static int lgdt3303_tuner_set_params(struct dvb_frontend* fe,
- struct dvb_frontend_parameters* params)
-{
- struct cx8802_dev *dev= fe->dvb->priv;
- struct cx88_core *core = dev->core;
-
- /* Put the analog decoder in standby to keep it quiet */
- cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
-
- return lg_h06xf_pll_set(fe, &core->i2c_adap, params);
-}
-
static int lgdt330x_pll_rf_set(struct dvb_frontend* fe, int index)
{
struct cx8802_dev *dev= fe->dvb->priv;
.set_ts_params = lgdt330x_set_ts_param,
};
-static int nxt200x_set_ts_param(struct dvb_frontend* fe,
- int is_punctured)
+static int nxt200x_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
struct cx8802_dev *dev= fe->dvb->priv;
struct cx88_core *core = dev->core;
- if (voltage == SEC_VOLTAGE_OFF) {
+ if (voltage == SEC_VOLTAGE_OFF)
cx_write(MO_GP0_IO, 0x000006fb);
- } else {
+ else
cx_write(MO_GP0_IO, 0x000006f9);
- }
if (core->prev_set_voltage)
return core->prev_set_voltage(fe, voltage);
switch (dev->core->board) {
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = dvb_attach(cx22702_attach,
- &hauppauge_novat_config,
+ &connexant_refboard_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR1100LP:
dev->dvb.frontend = dvb_attach(cx22702_attach,
- &hauppauge_hvr1100_config,
- &dev->core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- &dvb_pll_fmd1216me);
- }
- break;
- case CX88_BOARD_HAUPPAUGE_HVR1300:
- dev->dvb.frontend = dvb_attach(cx22702_attach,
- &hauppauge_hvr1300_config,
- &dev->core->i2c_adap);
- if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- &dvb_pll_fmd1216me);
- }
- break;
- case CX88_BOARD_HAUPPAUGE_HVR3000:
- dev->dvb.frontend = dvb_attach(cx22702_attach,
- &hauppauge_hvr3000_config,
+ &hauppauge_hvr_config,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- &dvb_pll_fmd1216me);
+ &dev->core->i2c_adap, &dvb_pll_fmd1216me);
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
- dev->core->pll_addr = 0x61;
- dev->core->pll_desc = &dvb_pll_thomson_fe6600;
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_hybrid,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dev->dvb.frontend->ops.tuner_ops.set_params = dvico_hybrid_tuner_set_params;
+ dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+ &dev->core->i2c_adap,
+ &dvb_pll_thomson_fe6600);
}
break;
case CX88_BOARD_PCHDTV_HD3000:
- dev->dvb.frontend = dvb_attach(or51132_attach,
- &pchdtv_hd3000,
+ dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
/* Select RF connector callback */
fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
- dev->core->pll_addr = 0x61;
- dev->core->pll_desc = &dvb_pll_microtune_4042;
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dev->dvb.frontend->ops.tuner_ops.set_params = lgdt3302_tuner_set_params;
+ dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+ &dev->core->i2c_adap,
+ &dvb_pll_microtune_4042);
}
}
break;
mdelay(100);
cx_set(MO_GP0_IO, 9);
mdelay(200);
- dev->core->pll_addr = 0x61;
- dev->core->pll_desc = &dvb_pll_thomson_dtt761x;
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dev->dvb.frontend->ops.tuner_ops.set_params = lgdt3302_tuner_set_params;
+ dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+ &dev->core->i2c_adap,
+ &dvb_pll_thomson_dtt761x);
}
}
break;
&fusionhdtv_5_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dev->dvb.frontend->ops.tuner_ops.set_params = lgdt3303_tuner_set_params;
+ dvb_attach(lgh06xf_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap);
}
}
break;
&pchdtv_hd5500,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dev->dvb.frontend->ops.tuner_ops.set_params = lgdt3303_tuner_set_params;
+ dvb_attach(lgh06xf_attach, dev->dvb.frontend,
+ &dev->core->i2c_adap);
}
}
break;
dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
}
break;
+ case CX88_BOARD_HAUPPAUGE_HVR1300:
+ dev->dvb.frontend = dvb_attach(cx22702_attach,
+ &hauppauge_hvr_config,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend != NULL) {
+ dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+ &dev->core->i2c_adap, &dvb_pll_fmd1216me);
+ }
+ break;
+ case CX88_BOARD_HAUPPAUGE_HVR3000:
+ dev->dvb.frontend = dvb_attach(cx22702_attach,
+ &hauppauge_hvr_config,
+ &dev->core->i2c_adap);
+ if (dev->dvb.frontend != NULL) {
+ dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+ &dev->core->i2c_adap, &dvb_pll_fmd1216me);
+ }
+ break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->core->name);
dev->dvb.frontend->ops.info.frequency_min = dev->core->pll_desc->min;
dev->dvb.frontend->ops.info.frequency_max = dev->core->pll_desc->max;
}
+ /* Ensure all frontends negotiate bus access */
+ dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
/* ----------------------------------------------------------- */
-static int __devinit dvb_probe(struct pci_dev *pci_dev,
- const struct pci_device_id *pci_id)
+/* CX8802 MPEG -> mini driver - We have been given the hardware */
+static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
{
- struct cx8802_dev *dev;
- struct cx88_core *core;
+ struct cx88_core *core = drv->core;
+ int err = 0;
+ dprintk( 1, "%s\n", __FUNCTION__);
+
+ switch (core->board) {
+ case CX88_BOARD_HAUPPAUGE_HVR1300:
+ /* We arrive here with either the cx23416 or the cx22702
+ * on the bus. Take the bus from the cx23416 and enable the
+ * cx22702 demod
+ */
+ cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset and enable */
+ cx_clear(MO_GP0_IO, 0x00000004);
+ udelay(1000);
+ break;
+ default:
+ err = -ENODEV;
+ }
+ return err;
+}
+
+/* CX8802 MPEG -> mini driver - We no longer have the hardware */
+static int cx8802_dvb_advise_release(struct cx8802_driver *drv)
+{
+ struct cx88_core *core = drv->core;
+ int err = 0;
+ dprintk( 1, "%s\n", __FUNCTION__);
+
+ switch (core->board) {
+ case CX88_BOARD_HAUPPAUGE_HVR1300:
+ /* Do Nothing, leave the cx22702 on the bus. */
+ break;
+ default:
+ err = -ENODEV;
+ }
+ return err;
+}
+
+static int cx8802_dvb_probe(struct cx8802_driver *drv)
+{
+ struct cx88_core *core = drv->core;
+ struct cx8802_dev *dev = drv->core->dvbdev;
int err;
- /* general setup */
- core = cx88_core_get(pci_dev);
- if (NULL == core)
- return -EINVAL;
+ dprintk( 1, "%s\n", __FUNCTION__);
+ dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
+ core->board,
+ core->name,
+ core->pci_bus,
+ core->pci_slot);
err = -ENODEV;
if (!(cx88_boards[core->board].mpeg & CX88_MPEG_DVB))
goto fail_core;
- err = -ENOMEM;
- dev = kzalloc(sizeof(*dev),GFP_KERNEL);
- if (NULL == dev)
- goto fail_core;
- dev->pci = pci_dev;
- dev->core = core;
-
- err = cx8802_init_common(dev);
- if (0 != err)
- goto fail_free;
-
#ifdef HAVE_VP3054_I2C
err = vp3054_i2c_probe(dev);
if (0 != err)
- goto fail_free;
+ goto fail_core;
#endif
/* dvb stuff */
sizeof(struct cx88_buffer),
dev);
err = dvb_register(dev);
- if (0 != err)
- goto fail_fini;
+ if (err != 0)
+ printk("%s dvb_register failed err = %d\n", __FUNCTION__, err);
- /* Maintain a reference to cx88-video can query the 8802 device. */
- core->dvbdev = dev;
- return 0;
-
- fail_fini:
- cx8802_fini_common(dev);
- fail_free:
- kfree(dev);
fail_core:
- cx88_core_put(core,pci_dev);
return err;
}
-static void __devexit dvb_remove(struct pci_dev *pci_dev)
+static int cx8802_dvb_remove(struct cx8802_driver *drv)
{
- struct cx8802_dev *dev = pci_get_drvdata(pci_dev);
-
- /* Destroy any 8802 reference. */
- dev->core->dvbdev = NULL;
+ struct cx8802_dev *dev = drv->core->dvbdev;
/* dvb */
videobuf_dvb_unregister(&dev->dvb);
vp3054_i2c_remove(dev);
#endif
- /* common */
- cx8802_fini_common(dev);
- cx88_core_put(dev->core,dev->pci);
- kfree(dev);
+ return 0;
}
-static struct pci_device_id cx8802_pci_tbl[] = {
- {
- .vendor = 0x14f1,
- .device = 0x8802,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- },{
- /* --- end of list --- */
- }
-};
-MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl);
-
-static struct pci_driver dvb_pci_driver = {
- .name = "cx88-dvb",
- .id_table = cx8802_pci_tbl,
- .probe = dvb_probe,
- .remove = __devexit_p(dvb_remove),
-#ifdef CONFIG_PM
- .suspend = cx8802_suspend_common,
- .resume = cx8802_resume_common,
-#endif
+static struct cx8802_driver cx8802_dvb_driver = {
+ .type_id = CX88_MPEG_DVB,
+ .hw_access = CX8802_DRVCTL_SHARED,
+ .probe = cx8802_dvb_probe,
+ .remove = cx8802_dvb_remove,
+ .advise_acquire = cx8802_dvb_advise_acquire,
+ .advise_release = cx8802_dvb_advise_release,
};
static int dvb_init(void)
printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
#endif
- return pci_register_driver(&dvb_pci_driver);
+ return cx8802_register_driver(&cx8802_dvb_driver);
}
static void dvb_fini(void)
{
- pci_unregister_driver(&dvb_pci_driver);
+ cx8802_unregister_driver(&cx8802_dvb_driver);
}
module_init(dvb_init);
mod_timer(&ir->timer, timeout);
}
+static void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir)
+{
+ if (ir->polling) {
+ INIT_WORK(&ir->work, cx88_ir_work);
+ init_timer(&ir->timer);
+ ir->timer.function = ir_timer;
+ ir->timer.data = (unsigned long)ir;
+ schedule_work(&ir->work);
+ }
+ if (ir->sampling) {
+ core->pci_irqmask |= (1 << 18); /* IR_SMP_INT */
+ cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */
+ cx_write(MO_DDSCFG_IO, 0x5); /* enable */
+ }
+}
+
+static void cx88_ir_stop(struct cx88_core *core, struct cx88_IR *ir)
+{
+ if (ir->sampling) {
+ cx_write(MO_DDSCFG_IO, 0x0);
+ core->pci_irqmask &= ~(1 << 18);
+ }
+
+ if (ir->polling) {
+ del_timer_sync(&ir->timer);
+ flush_scheduled_work();
+ }
+}
+
/* ---------------------------------------------------------------------- */
int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
int ir_type = IR_TYPE_OTHER;
+ int err = -ENOMEM;
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
input_dev = input_allocate_device();
- if (!ir || !input_dev) {
- kfree(ir);
- input_free_device(input_dev);
- return -ENOMEM;
- }
+ if (!ir || !input_dev)
+ goto err_out_free;
ir->input = input_dev;
}
if (NULL == ir_codes) {
- kfree(ir);
- input_free_device(input_dev);
- return -ENODEV;
+ err = -ENODEV;
+ goto err_out_free;
}
/* init input device */
ir->core = core;
core->ir = ir;
- if (ir->polling) {
- INIT_WORK(&ir->work, cx88_ir_work);
- init_timer(&ir->timer);
- ir->timer.function = ir_timer;
- ir->timer.data = (unsigned long)ir;
- schedule_work(&ir->work);
- }
- if (ir->sampling) {
- core->pci_irqmask |= (1 << 18); /* IR_SMP_INT */
- cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */
- cx_write(MO_DDSCFG_IO, 0x5); /* enable */
- }
+ cx88_ir_start(core, ir);
/* all done */
- input_register_device(ir->input);
+ err = input_register_device(ir->input);
+ if (err)
+ goto err_out_stop;
return 0;
+
+ err_out_stop:
+ cx88_ir_stop(core, ir);
+ core->ir = NULL;
+ err_out_free:
+ input_free_device(input_dev);
+ kfree(ir);
+ return err;
}
int cx88_ir_fini(struct cx88_core *core)
if (NULL == ir)
return 0;
- if (ir->sampling) {
- cx_write(MO_DDSCFG_IO, 0x0);
- core->pci_irqmask &= ~(1 << 18);
- }
- if (ir->polling) {
- del_timer(&ir->timer);
- flush_scheduled_work();
- }
-
+ cx88_ir_stop(core, ir);
input_unregister_device(ir->input);
kfree(ir);
MODULE_PARM_DESC(debug,"enable debug messages [mpeg]");
#define dprintk(level,fmt, arg...) if (debug >= level) \
- printk(KERN_DEBUG "%s/2: " fmt, dev->core->name , ## arg)
+ printk(KERN_DEBUG "%s/2-mpeg: " fmt, dev->core->name, ## arg)
+#define mpeg_dbg(level,fmt, arg...) if (debug >= level) \
+ printk(KERN_DEBUG "%s/2-mpeg: " fmt, core->name, ## arg)
+
+static LIST_HEAD(cx8802_devlist);
/* ------------------------------------------------------------------ */
static int cx8802_start_dma(struct cx8802_dev *dev,
/* FIXME: this needs a review.
* also: move to cx88-blackbird + cx88-dvb source files? */
- if (cx88_boards[core->board].mpeg == (CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD) ) {
- /* Report a warning until the mini driver patch is applied,
- * else the following conditions will set the dma registers incorrectly.
- * This will be removed in the next major patch and changes to the conditions
- * will be made.
- */
- printk(KERN_INFO "%s() board->(CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD) is invalid\n", __FUNCTION__);
- return -EINVAL;
- }
- if (cx88_boards[core->board].mpeg & CX88_MPEG_DVB) {
+ dprintk( 1, "core->active_type_id = 0x%08x\n", core->active_type_id);
+
+ if ( (core->active_type_id == CX88_MPEG_DVB) &&
+ (cx88_boards[core->board].mpeg & CX88_MPEG_DVB) ) {
+
+ dprintk( 1, "cx8802_start_dma doing .dvb\n");
/* negedge driven & software reset */
cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl);
udelay(100);
cx_write(MO_PINMUX_IO, 0x88); /* Enable MPEG parallel IO and video signal pins */
udelay(100);
break;
+ case CX88_BOARD_HAUPPAUGE_HVR1300:
+ break;
default:
cx_write(TS_SOP_STAT, 0x00);
break;
}
cx_write(TS_GEN_CNTRL, dev->ts_gen_cntrl);
udelay(100);
- }
-
- if (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) {
+ } else if ( (core->active_type_id == CX88_MPEG_BLACKBIRD) &&
+ (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) ) {
+ dprintk( 1, "cx8802_start_dma doing .blackbird\n");
cx_write(MO_PINMUX_IO, 0x88); /* enable MPEG parallel IO */
cx_write(TS_GEN_CNTRL, 0x46); /* punctured clock TS & posedge driven & software reset */
cx_write(TS_GEN_CNTRL, 0x06); /* punctured clock TS & posedge driven */
udelay(100);
+ } else {
+ printk( "%s() Failed. Unsupported value in .mpeg (0x%08x)\n", __FUNCTION__,
+ cx88_boards[core->board].mpeg );
+ return -EINVAL;
}
/* reset counter */
return 0;
}
+struct cx8802_dev * cx8802_get_device(struct inode *inode)
+{
+ int minor = iminor(inode);
+ struct cx8802_dev *h = NULL;
+ struct list_head *list;
+
+ list_for_each(list,&cx8802_devlist) {
+ h = list_entry(list, struct cx8802_dev, devlist);
+ if (h->mpeg_dev->minor == minor)
+ return h;
+ }
+
+ return NULL;
+}
+
+struct cx8802_driver * cx8802_get_driver(struct cx8802_dev *dev, enum cx88_board_type btype)
+{
+ struct cx8802_dev *h = NULL;
+ struct cx8802_driver *d = NULL;
+ struct list_head *list;
+ struct list_head *list2;
+
+ list_for_each(list,&cx8802_devlist) {
+ h = list_entry(list, struct cx8802_dev, devlist);
+ if (h != dev)
+ continue;
+
+ list_for_each(list2, &h->drvlist.devlist) {
+ d = list_entry(list2, struct cx8802_driver, devlist);
+
+ /* only unregister the correct driver type */
+ if (d->type_id == btype) {
+ return d;
+ }
+ }
+ }
+
+ return NULL;
+}
+
+/* Driver asked for hardware access. */
+int cx8802_request_acquire(struct cx8802_driver *drv)
+{
+ struct cx88_core *core = drv->core;
+
+ /* Fail a request for hardware if the device is busy. */
+ if (core->active_type_id != CX88_BOARD_NONE)
+ return -EBUSY;
+
+ if (drv->advise_acquire)
+ {
+ core->active_type_id = drv->type_id;
+ drv->advise_acquire(drv);
+
+ mpeg_dbg(1,"%s() Post acquire GPIO=%x\n", __FUNCTION__, cx_read(MO_GP0_IO));
+ }
+
+ return 0;
+}
+
+/* Driver asked to release hardware. */
+int cx8802_request_release(struct cx8802_driver *drv)
+{
+ struct cx88_core *core = drv->core;
+
+ if (drv->advise_release)
+ {
+ drv->advise_release(drv);
+ core->active_type_id = CX88_BOARD_NONE;
+ mpeg_dbg(1,"%s() Post release GPIO=%x\n", __FUNCTION__, cx_read(MO_GP0_IO));
+ }
+
+ return 0;
+}
+
+static int cx8802_check_driver(struct cx8802_driver *drv)
+{
+ if (drv == NULL)
+ return -ENODEV;
+
+ if ((drv->type_id != CX88_MPEG_DVB) &&
+ (drv->type_id != CX88_MPEG_BLACKBIRD))
+ return -EINVAL;
+
+ if ((drv->hw_access != CX8802_DRVCTL_SHARED) &&
+ (drv->hw_access != CX8802_DRVCTL_EXCLUSIVE))
+ return -EINVAL;
+
+ if ((drv->probe == NULL) ||
+ (drv->remove == NULL) ||
+ (drv->advise_acquire == NULL) ||
+ (drv->advise_release == NULL))
+ return -EINVAL;
+
+ return 0;
+}
+
+int cx8802_register_driver(struct cx8802_driver *drv)
+{
+ struct cx8802_dev *h;
+ struct cx8802_driver *driver;
+ struct list_head *list;
+ int err = 0, i = 0;
+
+ printk(KERN_INFO "%s() ->registering driver type=%s access=%s\n", __FUNCTION__ ,
+ drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird",
+ drv->hw_access == CX8802_DRVCTL_SHARED ? "shared" : "exclusive");
+
+ if ((err = cx8802_check_driver(drv)) != 0) {
+ printk(KERN_INFO "%s() cx8802_driver is invalid\n", __FUNCTION__ );
+ return err;
+ }
+
+ list_for_each(list,&cx8802_devlist) {
+ h = list_entry(list, struct cx8802_dev, devlist);
+
+ printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d]\n",
+ h->core->name,h->pci->subsystem_vendor,
+ h->pci->subsystem_device,cx88_boards[h->core->board].name,
+ h->core->board);
+
+ /* Bring up a new struct for each driver instance */
+ driver = kzalloc(sizeof(*drv),GFP_KERNEL);
+ if (driver == NULL)
+ return -ENOMEM;
+
+ /* Snapshot of the driver registration data */
+ drv->core = h->core;
+ drv->suspend = cx8802_suspend_common;
+ drv->resume = cx8802_resume_common;
+ drv->request_acquire = cx8802_request_acquire;
+ drv->request_release = cx8802_request_release;
+ memcpy(driver, drv, sizeof(*driver));
+
+ err = drv->probe(driver);
+ if (err == 0) {
+ i++;
+ mutex_lock(&drv->core->lock);
+ list_add_tail(&driver->devlist,&h->drvlist.devlist);
+ mutex_unlock(&drv->core->lock);
+ } else {
+ printk(KERN_ERR "%s() ->probe failed err = %d\n", __FUNCTION__, err);
+ }
+
+ }
+ if (i == 0)
+ err = -ENODEV;
+ else
+ err = 0;
+
+ return err;
+}
+
+int cx8802_unregister_driver(struct cx8802_driver *drv)
+{
+ struct cx8802_dev *h;
+ struct cx8802_driver *d;
+ struct list_head *list;
+ struct list_head *list2, *q;
+ int err = 0, i = 0;
+
+ printk(KERN_INFO "%s() ->unregistering driver type=%s\n", __FUNCTION__ ,
+ drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird");
+
+ list_for_each(list,&cx8802_devlist) {
+ i++;
+ h = list_entry(list, struct cx8802_dev, devlist);
+
+ printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d]\n",
+ h->core->name,h->pci->subsystem_vendor,
+ h->pci->subsystem_device,cx88_boards[h->core->board].name,
+ h->core->board);
+
+ list_for_each_safe(list2, q, &h->drvlist.devlist) {
+ d = list_entry(list2, struct cx8802_driver, devlist);
+
+ /* only unregister the correct driver type */
+ if (d->type_id != drv->type_id)
+ continue;
+
+ err = d->remove(d);
+ if (err == 0) {
+ mutex_lock(&drv->core->lock);
+ list_del(list2);
+ mutex_unlock(&drv->core->lock);
+ } else
+ printk(KERN_ERR "%s() ->remove failed err = %d\n", __FUNCTION__, err);
+
+ }
+
+ }
+
+ return err;
+}
+
/* ----------------------------------------------------------- */
+static int __devinit cx8802_probe(struct pci_dev *pci_dev,
+ const struct pci_device_id *pci_id)
+{
+ struct cx8802_dev *dev;
+ struct cx88_core *core;
+ int err;
+
+ /* general setup */
+ core = cx88_core_get(pci_dev);
+ if (NULL == core)
+ return -EINVAL;
+ printk("%s/2: cx2388x 8802 Driver Manager\n", core->name);
+
+ err = -ENODEV;
+ if (!cx88_boards[core->board].mpeg)
+ goto fail_core;
+
+ err = -ENOMEM;
+ dev = kzalloc(sizeof(*dev),GFP_KERNEL);
+ if (NULL == dev)
+ goto fail_core;
+ dev->pci = pci_dev;
+ dev->core = core;
+
+ err = cx8802_init_common(dev);
+ if (err != 0)
+ goto fail_free;
+
+ INIT_LIST_HEAD(&dev->drvlist.devlist);
+ list_add_tail(&dev->devlist,&cx8802_devlist);
+
+ /* Maintain a reference so cx88-video can query the 8802 device. */
+ core->dvbdev = dev;
+ return 0;
+
+ fail_free:
+ kfree(dev);
+ fail_core:
+ cx88_core_put(core,pci_dev);
+ return err;
+}
+
+static void __devexit cx8802_remove(struct pci_dev *pci_dev)
+{
+ struct cx8802_dev *dev;
+ struct cx8802_driver *h;
+ struct list_head *list;
+
+ dev = pci_get_drvdata(pci_dev);
+
+ dprintk( 1, "%s\n", __FUNCTION__);
+
+ list_for_each(list,&dev->drvlist.devlist) {
+ h = list_entry(list, struct cx8802_driver, devlist);
+ dprintk( 1, " ->driver\n");
+ if (h->remove == NULL) {
+ printk(KERN_ERR "%s .. skipping driver, no probe function\n", __FUNCTION__);
+ continue;
+ }
+ printk(KERN_INFO "%s .. Removing driver type %d\n", __FUNCTION__, h->type_id);
+ cx8802_unregister_driver(h);
+ list_del(&dev->drvlist.devlist);
+ }
+
+ /* Destroy any 8802 reference. */
+ dev->core->dvbdev = NULL;
+
+ /* common */
+ cx8802_fini_common(dev);
+ cx88_core_put(dev->core,dev->pci);
+ kfree(dev);
+}
+
+static struct pci_device_id cx8802_pci_tbl[] = {
+ {
+ .vendor = 0x14f1,
+ .device = 0x8802,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },{
+ /* --- end of list --- */
+ }
+};
+MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl);
+
+static struct pci_driver cx8802_pci_driver = {
+ .name = "cx88-mpeg driver manager",
+ .id_table = cx8802_pci_tbl,
+ .probe = cx8802_probe,
+ .remove = __devexit_p(cx8802_remove),
+};
+
+static int cx8802_init(void)
+{
+ printk(KERN_INFO "cx2388x cx88-mpeg Driver Manager version %d.%d.%d loaded\n",
+ (CX88_VERSION_CODE >> 16) & 0xff,
+ (CX88_VERSION_CODE >> 8) & 0xff,
+ CX88_VERSION_CODE & 0xff);
+#ifdef SNAPSHOT
+ printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
+ SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
+#endif
+ return pci_register_driver(&cx8802_pci_driver);
+}
+
+static void cx8802_fini(void)
+{
+ pci_unregister_driver(&cx8802_pci_driver);
+}
+
+module_init(cx8802_init);
+module_exit(cx8802_fini);
EXPORT_SYMBOL(cx8802_buf_prepare);
EXPORT_SYMBOL(cx8802_buf_queue);
EXPORT_SYMBOL(cx8802_cancel_buffers);
EXPORT_SYMBOL(cx8802_init_common);
EXPORT_SYMBOL(cx8802_fini_common);
-EXPORT_SYMBOL(cx8802_suspend_common);
-EXPORT_SYMBOL(cx8802_resume_common);
-
+EXPORT_SYMBOL(cx8802_register_driver);
+EXPORT_SYMBOL(cx8802_unregister_driver);
+EXPORT_SYMBOL(cx8802_get_device);
+EXPORT_SYMBOL(cx8802_get_driver);
/* ----------------------------------------------------------- */
/*
* Local variables:
cx88_start_audio_dma(core);
if (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) {
- /* sets sound input from external adc */
- switch (core->board) {
- case CX88_BOARD_HAUPPAUGE_ROSLYN:
- case CX88_BOARD_KWORLD_MCE200_DELUXE:
- case CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT:
- case CX88_BOARD_PIXELVIEW_PLAYTV_P7000:
- case CX88_BOARD_ASUS_PVR_416:
- cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
- break;
- default:
- cx_set(AUD_CTL, EN_I2SIN_ENABLE);
- }
-
cx_write(AUD_I2SINPUTCNTL, 4);
cx_write(AUD_BAUDRATE, 1);
/* 'pass-thru mode': this enables the i2s output to the mpeg encoder */
cx_clear(MO_FILTER_ODD, 0x00002020);
break;
}
+
+ if (cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD) {
+ /* sets sound input from external adc */
+ if (INPUT(input)->extadc)
+ cx_set(AUD_CTL, EN_I2SIN_ENABLE);
+ else
+ cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
+ }
return 0;
}
mutex_unlock(&core->lock);
return 0;
}
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ /* ioctls to allow direct acces to the cx2388x registers */
+ case VIDIOC_INT_G_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+
+ if (reg->i2c_id != 0)
+ return -EINVAL;
+ /* cx2388x has a 24-bit register space */
+ reg->val = cx_read(reg->reg&0xffffff);
+ return 0;
+ }
+ case VIDIOC_INT_S_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+
+ if (reg->i2c_id != 0)
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ cx_write(reg->reg&0xffffff, reg->val);
+ return 0;
+ }
+#endif
default:
return v4l_compat_translate_ioctl(inode,file,cmd,arg,
dev->core->board != CX88_BOARD_DNTV_LIVE_DVB_T_PRO)
return;
- i2c_bit_del_bus(&vp3054_i2c->adap);
+ i2c_del_adapter(&vp3054_i2c->adap);
kfree(vp3054_i2c);
}
CX88_MPEG_BLACKBIRD
};
+enum cx8802_board_access {
+ CX8802_DRVCTL_SHARED = 1,
+ CX8802_DRVCTL_EXCLUSIVE = 2,
+};
+
/* ----------------------------------------------------------- */
/* tv norms */
enum cx88_itype type;
unsigned int vmux;
u32 gpio0, gpio1, gpio2, gpio3;
+ unsigned int extadc:1;
};
struct cx88_board {
/* cx88-video needs to access cx8802 for hybrid tuner pll access. */
struct cx8802_dev *dvbdev;
+ enum cx88_board_type active_type_id;
};
struct cx8800_dev;
int disabled;
};
+struct cx8802_driver {
+ struct cx88_core *core;
+ struct list_head devlist;
+
+ /* Type of driver and access required */
+ enum cx88_board_type type_id;
+ enum cx8802_board_access hw_access;
+
+ /* MPEG 8802 internal only */
+ int (*suspend)(struct pci_dev *pci_dev, pm_message_t state);
+ int (*resume)(struct pci_dev *pci_dev);
+
+ /* MPEG 8802 -> mini driver - Driver probe and configuration */
+ int (*probe)(struct cx8802_driver *drv);
+ int (*remove)(struct cx8802_driver *drv);
+
+ /* MPEG 8802 -> mini driver - Access for hardware control */
+ int (*advise_acquire)(struct cx8802_driver *drv);
+ int (*advise_release)(struct cx8802_driver *drv);
+
+ /* MPEG 8802 <- mini driver - Access for hardware control */
+ int (*request_acquire)(struct cx8802_driver *drv);
+ int (*request_release)(struct cx8802_driver *drv);
+};
+
struct cx8802_dev {
struct cx88_core *core;
spinlock_t slock;
/* mpeg params */
struct cx2341x_mpeg_params params;
+
+ /* List of attached drivers */
+ struct cx8802_driver drvlist;
};
/* ----------------------------------------------------------- */
void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual);
int cx88_audio_thread(void *data);
+int cx8802_register_driver(struct cx8802_driver *drv);
+int cx8802_unregister_driver(struct cx8802_driver *drv);
+struct cx8802_dev * cx8802_get_device(struct inode *inode);
+struct cx8802_driver * cx8802_get_driver(struct cx8802_dev *dev, enum cx88_board_type btype);
+
/* ----------------------------------------------------------- */
/* cx88-input.c */
extern const u32 cx88_user_ctrls[];
extern int cx8800_ctrl_query(struct v4l2_queryctrl *qctrl);
+/* ----------------------------------------------------------- */
+/* cx88-blackbird.c */
+/* used by cx88-ivtv ioctl emulation layer */
+extern int (*cx88_ioctl_hook)(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg);
+extern unsigned int (*cx88_ioctl_translator)(unsigned int cmd);
+
/*
* Local variables:
* c-basic-offset: 8
pipesize, packets, transfer_buffer_length);
while (buffers < (s->total_buffer_size << 10)) {
- b = (pbuff_t) kzalloc (sizeof (buff_t), GFP_KERNEL);
+ b = kzalloc(sizeof (buff_t), GFP_KERNEL);
if (!b) {
err("kzalloc(sizeof(buff_t))==NULL");
goto err;
switch (cmd) {
case IOCTL_DAB_BULK:
- pbulk = (pbulk_transfer_t) kmalloc (sizeof (bulk_transfer_t), GFP_KERNEL);
+ pbulk = kmalloc(sizeof (bulk_transfer_t), GFP_KERNEL);
if (!pbulk) {
ret = -ENOMEM;
int ir_type;
struct IR_i2c *ir;
struct input_dev *input_dev;
+ int err;
ir = kzalloc(sizeof(struct IR_i2c),GFP_KERNEL);
input_dev = input_allocate_device();
if (!ir || !input_dev) {
- input_free_device(input_dev);
- kfree(ir);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err_out_free;
}
- memset(ir,0,sizeof(*ir));
ir->c = client_template;
ir->input = input_dev;
break;
case 0x7a:
case 0x47:
+ case 0x71:
/* Handled by saa7134-input */
name = "SAA713x remote";
ir_type = IR_TYPE_OTHER;
break;
default:
/* shouldn't happen */
- printk(DEVNAME ": Huh? unknown i2c address (0x%02x)?\n",addr);
- kfree(ir);
- return -1;
+ printk(DEVNAME ": Huh? unknown i2c address (0x%02x)?\n", addr);
+ err = -ENODEV;
+ goto err_out_free;
}
/* Sets name */
snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (%s)", name);
- ir->ir_codes=ir_codes;
+ ir->ir_codes = ir_codes;
/* register i2c device
* At device register, IR codes may be changed to be
* board dependent.
*/
- i2c_attach_client(&ir->c);
+ err = i2c_attach_client(&ir->c);
+ if (err)
+ goto err_out_free;
/* If IR not supported or disabled, unregisters driver */
if (ir->get_key == NULL) {
- i2c_detach_client(&ir->c);
- kfree(ir);
- return -1;
+ err = -ENODEV;
+ goto err_out_detach;
}
/* Phys addr can only be set after attaching (for ir->c.dev.bus_id) */
ir->c.dev.bus_id);
/* init + register input device */
- ir_input_init(input_dev,&ir->ir,ir_type,ir->ir_codes);
+ ir_input_init(input_dev, &ir->ir, ir_type, ir->ir_codes);
input_dev->id.bustype = BUS_I2C;
input_dev->name = ir->c.name;
input_dev->phys = ir->phys;
- /* register event device */
- input_register_device(ir->input);
+ err = input_register_device(ir->input);
+ if (err)
+ goto err_out_detach;
+
printk(DEVNAME ": %s detected at %s [%s]\n",
- ir->input->name,ir->input->phys,adap->name);
+ ir->input->name, ir->input->phys, adap->name);
/* start polling via eventd */
INIT_WORK(&ir->work, ir_work);
schedule_work(&ir->work);
return 0;
+
+ err_out_detach:
+ i2c_detach_client(&ir->c);
+ err_out_free:
+ input_free_device(input_dev);
+ kfree(ir);
+ return err;
}
static int ir_detach(struct i2c_client *client)
struct IR_i2c *ir = i2c_get_clientdata(client);
/* kill outstanding polls */
- del_timer(&ir->timer);
+ del_timer_sync(&ir->timer);
flush_scheduled_work();
/* unregister devices */
*/
static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1};
- static const int probe_saa7134[] = { 0x7a, 0x47, -1 };
+ static const int probe_saa7134[] = { 0x7a, 0x47, 0x71, -1 };
static const int probe_em28XX[] = { 0x30, 0x47, -1 };
const int *probe = NULL;
struct i2c_client c;
printk("mxb: saa7111 i2c module not available.\n");
return -ENODEV;
}
- if ((result = request_module("tuner")) < 0) {
- printk("mxb: tuner i2c module not available.\n");
- return -ENODEV;
- }
if ((result = request_module("tea6420")) < 0) {
printk("mxb: tea6420 i2c module not available.\n");
return -ENODEV;
printk("mxb: tda9840 i2c module not available.\n");
return -ENODEV;
}
+ if ((result = request_module("tuner")) < 0) {
+ printk("mxb: tuner i2c module not available.\n");
+ return -ENODEV;
+ }
mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL);
if( NULL == mxb ) {
--- /dev/null
+/*
+ * A V4L2 driver for OmniVision OV7670 cameras.
+ *
+ * Copyright 2006 One Laptop Per Child Association, Inc. Written
+ * by Jonathan Corbet with substantial inspiration from Mark
+ * McClelland's ovcamchip code.
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/videodev.h>
+#include <media/v4l2-common.h>
+#include <linux/i2c.h>
+
+
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
+MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
+MODULE_LICENSE("GPL");
+
+/*
+ * Basic window sizes. These probably belong somewhere more globally
+ * useful.
+ */
+#define VGA_WIDTH 640
+#define VGA_HEIGHT 480
+#define QVGA_WIDTH 320
+#define QVGA_HEIGHT 240
+#define CIF_WIDTH 352
+#define CIF_HEIGHT 288
+#define QCIF_WIDTH 176
+#define QCIF_HEIGHT 144
+
+/*
+ * Our nominal (default) frame rate.
+ */
+#define OV7670_FRAME_RATE 30
+
+/*
+ * The 7670 sits on i2c with ID 0x42
+ */
+#define OV7670_I2C_ADDR 0x42
+
+/* Registers */
+#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */
+#define REG_BLUE 0x01 /* blue gain */
+#define REG_RED 0x02 /* red gain */
+#define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */
+#define REG_COM1 0x04 /* Control 1 */
+#define COM1_CCIR656 0x40 /* CCIR656 enable */
+#define REG_BAVE 0x05 /* U/B Average level */
+#define REG_GbAVE 0x06 /* Y/Gb Average level */
+#define REG_AECHH 0x07 /* AEC MS 5 bits */
+#define REG_RAVE 0x08 /* V/R Average level */
+#define REG_COM2 0x09 /* Control 2 */
+#define COM2_SSLEEP 0x10 /* Soft sleep mode */
+#define REG_PID 0x0a /* Product ID MSB */
+#define REG_VER 0x0b /* Product ID LSB */
+#define REG_COM3 0x0c /* Control 3 */
+#define COM3_SWAP 0x40 /* Byte swap */
+#define COM3_SCALEEN 0x08 /* Enable scaling */
+#define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */
+#define REG_COM4 0x0d /* Control 4 */
+#define REG_COM5 0x0e /* All "reserved" */
+#define REG_COM6 0x0f /* Control 6 */
+#define REG_AECH 0x10 /* More bits of AEC value */
+#define REG_CLKRC 0x11 /* Clocl control */
+#define CLK_EXT 0x40 /* Use external clock directly */
+#define CLK_SCALE 0x3f /* Mask for internal clock scale */
+#define REG_COM7 0x12 /* Control 7 */
+#define COM7_RESET 0x80 /* Register reset */
+#define COM7_FMT_MASK 0x38
+#define COM7_FMT_VGA 0x00
+#define COM7_FMT_CIF 0x20 /* CIF format */
+#define COM7_FMT_QVGA 0x10 /* QVGA format */
+#define COM7_FMT_QCIF 0x08 /* QCIF format */
+#define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */
+#define COM7_YUV 0x00 /* YUV */
+#define COM7_BAYER 0x01 /* Bayer format */
+#define COM7_PBAYER 0x05 /* "Processed bayer" */
+#define REG_COM8 0x13 /* Control 8 */
+#define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */
+#define COM8_AECSTEP 0x40 /* Unlimited AEC step size */
+#define COM8_BFILT 0x20 /* Band filter enable */
+#define COM8_AGC 0x04 /* Auto gain enable */
+#define COM8_AWB 0x02 /* White balance enable */
+#define COM8_AEC 0x01 /* Auto exposure enable */
+#define REG_COM9 0x14 /* Control 9 - gain ceiling */
+#define REG_COM10 0x15 /* Control 10 */
+#define COM10_HSYNC 0x40 /* HSYNC instead of HREF */
+#define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */
+#define COM10_HREF_REV 0x08 /* Reverse HREF */
+#define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */
+#define COM10_VS_NEG 0x02 /* VSYNC negative */
+#define COM10_HS_NEG 0x01 /* HSYNC negative */
+#define REG_HSTART 0x17 /* Horiz start high bits */
+#define REG_HSTOP 0x18 /* Horiz stop high bits */
+#define REG_VSTART 0x19 /* Vert start high bits */
+#define REG_VSTOP 0x1a /* Vert stop high bits */
+#define REG_PSHFT 0x1b /* Pixel delay after HREF */
+#define REG_MIDH 0x1c /* Manuf. ID high */
+#define REG_MIDL 0x1d /* Manuf. ID low */
+#define REG_MVFP 0x1e /* Mirror / vflip */
+#define MVFP_MIRROR 0x20 /* Mirror image */
+#define MVFP_FLIP 0x10 /* Vertical flip */
+
+#define REG_AEW 0x24 /* AGC upper limit */
+#define REG_AEB 0x25 /* AGC lower limit */
+#define REG_VPT 0x26 /* AGC/AEC fast mode op region */
+#define REG_HSYST 0x30 /* HSYNC rising edge delay */
+#define REG_HSYEN 0x31 /* HSYNC falling edge delay */
+#define REG_HREF 0x32 /* HREF pieces */
+#define REG_TSLB 0x3a /* lots of stuff */
+#define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */
+#define REG_COM11 0x3b /* Control 11 */
+#define COM11_NIGHT 0x80 /* NIght mode enable */
+#define COM11_NMFR 0x60 /* Two bit NM frame rate */
+#define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */
+#define COM11_50HZ 0x08 /* Manual 50Hz select */
+#define COM11_EXP 0x02
+#define REG_COM12 0x3c /* Control 12 */
+#define COM12_HREF 0x80 /* HREF always */
+#define REG_COM13 0x3d /* Control 13 */
+#define COM13_GAMMA 0x80 /* Gamma enable */
+#define COM13_UVSAT 0x40 /* UV saturation auto adjustment */
+#define COM13_UVSWAP 0x01 /* V before U - w/TSLB */
+#define REG_COM14 0x3e /* Control 14 */
+#define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */
+#define REG_EDGE 0x3f /* Edge enhancement factor */
+#define REG_COM15 0x40 /* Control 15 */
+#define COM15_R10F0 0x00 /* Data range 10 to F0 */
+#define COM15_R01FE 0x80 /* 01 to FE */
+#define COM15_R00FF 0xc0 /* 00 to FF */
+#define COM15_RGB565 0x10 /* RGB565 output */
+#define COM15_RGB555 0x30 /* RGB555 output */
+#define REG_COM16 0x41 /* Control 16 */
+#define COM16_AWBGAIN 0x08 /* AWB gain enable */
+#define REG_COM17 0x42 /* Control 17 */
+#define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */
+#define COM17_CBAR 0x08 /* DSP Color bar */
+
+/*
+ * This matrix defines how the colors are generated, must be
+ * tweaked to adjust hue and saturation.
+ *
+ * Order: v-red, v-green, v-blue, u-red, u-green, u-blue
+ *
+ * They are nine-bit signed quantities, with the sign bit
+ * stored in 0x58. Sign for v-red is bit 0, and up from there.
+ */
+#define REG_CMATRIX_BASE 0x4f
+#define CMATRIX_LEN 6
+#define REG_CMATRIX_SIGN 0x58
+
+
+#define REG_BRIGHT 0x55 /* Brightness */
+#define REG_CONTRAS 0x56 /* Contrast control */
+
+#define REG_GFIX 0x69 /* Fix gain control */
+
+#define REG_RGB444 0x8c /* RGB 444 control */
+#define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */
+#define R444_RGBX 0x01 /* Empty nibble at end */
+
+#define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */
+#define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */
+
+#define REG_BD50MAX 0xa5 /* 50hz banding step limit */
+#define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */
+#define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */
+#define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */
+#define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */
+#define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */
+#define REG_BD60MAX 0xab /* 60hz banding step limit */
+
+
+/*
+ * Information we maintain about a known sensor.
+ */
+struct ov7670_format_struct; /* coming later */
+struct ov7670_info {
+ struct ov7670_format_struct *fmt; /* Current format */
+ unsigned char sat; /* Saturation value */
+ int hue; /* Hue value */
+};
+
+
+
+
+/*
+ * The default register settings, as obtained from OmniVision. There
+ * is really no making sense of most of these - lots of "reserved" values
+ * and such.
+ *
+ * These settings give VGA YUYV.
+ */
+
+struct regval_list {
+ unsigned char reg_num;
+ unsigned char value;
+};
+
+static struct regval_list ov7670_default_regs[] = {
+ { REG_COM7, COM7_RESET },
+/*
+ * Clock scale: 3 = 15fps
+ * 2 = 20fps
+ * 1 = 30fps
+ */
+ { REG_CLKRC, 0x1 }, /* OV: clock scale (30 fps) */
+ { REG_TSLB, 0x04 }, /* OV */
+ { REG_COM7, 0 }, /* VGA */
+ /*
+ * Set the hardware window. These values from OV don't entirely
+ * make sense - hstop is less than hstart. But they work...
+ */
+ { REG_HSTART, 0x13 }, { REG_HSTOP, 0x01 },
+ { REG_HREF, 0xb6 }, { REG_VSTART, 0x02 },
+ { REG_VSTOP, 0x7a }, { REG_VREF, 0x0a },
+
+ { REG_COM3, 0 }, { REG_COM14, 0 },
+ /* Mystery scaling numbers */
+ { 0x70, 0x3a }, { 0x71, 0x35 },
+ { 0x72, 0x11 }, { 0x73, 0xf0 },
+ { 0xa2, 0x02 }, { REG_COM10, 0x0 },
+
+ /* Gamma curve values */
+ { 0x7a, 0x20 }, { 0x7b, 0x10 },
+ { 0x7c, 0x1e }, { 0x7d, 0x35 },
+ { 0x7e, 0x5a }, { 0x7f, 0x69 },
+ { 0x80, 0x76 }, { 0x81, 0x80 },
+ { 0x82, 0x88 }, { 0x83, 0x8f },
+ { 0x84, 0x96 }, { 0x85, 0xa3 },
+ { 0x86, 0xaf }, { 0x87, 0xc4 },
+ { 0x88, 0xd7 }, { 0x89, 0xe8 },
+
+ /* AGC and AEC parameters. Note we start by disabling those features,
+ then turn them only after tweaking the values. */
+ { REG_COM8, COM8_FASTAEC | COM8_AECSTEP | COM8_BFILT },
+ { REG_GAIN, 0 }, { REG_AECH, 0 },
+ { REG_COM4, 0x40 }, /* magic reserved bit */
+ { REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
+ { REG_BD50MAX, 0x05 }, { REG_BD60MAX, 0x07 },
+ { REG_AEW, 0x95 }, { REG_AEB, 0x33 },
+ { REG_VPT, 0xe3 }, { REG_HAECC1, 0x78 },
+ { REG_HAECC2, 0x68 }, { 0xa1, 0x03 }, /* magic */
+ { REG_HAECC3, 0xd8 }, { REG_HAECC4, 0xd8 },
+ { REG_HAECC5, 0xf0 }, { REG_HAECC6, 0x90 },
+ { REG_HAECC7, 0x94 },
+ { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC },
+
+ /* Almost all of these are magic "reserved" values. */
+ { REG_COM5, 0x61 }, { REG_COM6, 0x4b },
+ { 0x16, 0x02 }, { REG_MVFP, 0x07|MVFP_MIRROR },
+ { 0x21, 0x02 }, { 0x22, 0x91 },
+ { 0x29, 0x07 }, { 0x33, 0x0b },
+ { 0x35, 0x0b }, { 0x37, 0x1d },
+ { 0x38, 0x71 }, { 0x39, 0x2a },
+ { REG_COM12, 0x78 }, { 0x4d, 0x40 },
+ { 0x4e, 0x20 }, { REG_GFIX, 0 },
+ { 0x6b, 0x4a }, { 0x74, 0x10 },
+ { 0x8d, 0x4f }, { 0x8e, 0 },
+ { 0x8f, 0 }, { 0x90, 0 },
+ { 0x91, 0 }, { 0x96, 0 },
+ { 0x9a, 0 }, { 0xb0, 0x84 },
+ { 0xb1, 0x0c }, { 0xb2, 0x0e },
+ { 0xb3, 0x82 }, { 0xb8, 0x0a },
+
+ /* More reserved magic, some of which tweaks white balance */
+ { 0x43, 0x0a }, { 0x44, 0xf0 },
+ { 0x45, 0x34 }, { 0x46, 0x58 },
+ { 0x47, 0x28 }, { 0x48, 0x3a },
+ { 0x59, 0x88 }, { 0x5a, 0x88 },
+ { 0x5b, 0x44 }, { 0x5c, 0x67 },
+ { 0x5d, 0x49 }, { 0x5e, 0x0e },
+ { 0x6c, 0x0a }, { 0x6d, 0x55 },
+ { 0x6e, 0x11 }, { 0x6f, 0x9f }, /* "9e for advance AWB" */
+ { 0x6a, 0x40 }, { REG_BLUE, 0x40 },
+ { REG_RED, 0x60 },
+ { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC|COM8_AWB },
+
+ /* Matrix coefficients */
+ { 0x4f, 0x80 }, { 0x50, 0x80 },
+ { 0x51, 0 }, { 0x52, 0x22 },
+ { 0x53, 0x5e }, { 0x54, 0x80 },
+ { 0x58, 0x9e },
+
+ { REG_COM16, COM16_AWBGAIN }, { REG_EDGE, 0 },
+ { 0x75, 0x05 }, { 0x76, 0xe1 },
+ { 0x4c, 0 }, { 0x77, 0x01 },
+ { REG_COM13, 0xc3 }, { 0x4b, 0x09 },
+ { 0xc9, 0x60 }, { REG_COM16, 0x38 },
+ { 0x56, 0x40 },
+
+ { 0x34, 0x11 }, { REG_COM11, COM11_EXP|COM11_HZAUTO },
+ { 0xa4, 0x88 }, { 0x96, 0 },
+ { 0x97, 0x30 }, { 0x98, 0x20 },
+ { 0x99, 0x30 }, { 0x9a, 0x84 },
+ { 0x9b, 0x29 }, { 0x9c, 0x03 },
+ { 0x9d, 0x4c }, { 0x9e, 0x3f },
+ { 0x78, 0x04 },
+
+ /* Extra-weird stuff. Some sort of multiplexor register */
+ { 0x79, 0x01 }, { 0xc8, 0xf0 },
+ { 0x79, 0x0f }, { 0xc8, 0x00 },
+ { 0x79, 0x10 }, { 0xc8, 0x7e },
+ { 0x79, 0x0a }, { 0xc8, 0x80 },
+ { 0x79, 0x0b }, { 0xc8, 0x01 },
+ { 0x79, 0x0c }, { 0xc8, 0x0f },
+ { 0x79, 0x0d }, { 0xc8, 0x20 },
+ { 0x79, 0x09 }, { 0xc8, 0x80 },
+ { 0x79, 0x02 }, { 0xc8, 0xc0 },
+ { 0x79, 0x03 }, { 0xc8, 0x40 },
+ { 0x79, 0x05 }, { 0xc8, 0x30 },
+ { 0x79, 0x26 },
+
+ { 0xff, 0xff }, /* END MARKER */
+};
+
+
+/*
+ * Here we'll try to encapsulate the changes for just the output
+ * video format.
+ *
+ * RGB656 and YUV422 come from OV; RGB444 is homebrewed.
+ *
+ * IMPORTANT RULE: the first entry must be for COM7, see ov7670_s_fmt for why.
+ */
+
+
+static struct regval_list ov7670_fmt_yuv422[] = {
+ { REG_COM7, 0x0 }, /* Selects YUV mode */
+ { REG_RGB444, 0 }, /* No RGB444 please */
+ { REG_COM1, 0 },
+ { REG_COM15, COM15_R00FF },
+ { REG_COM9, 0x18 }, /* 4x gain ceiling; 0x8 is reserved bit */
+ { 0x4f, 0x80 }, /* "matrix coefficient 1" */
+ { 0x50, 0x80 }, /* "matrix coefficient 2" */
+ { 0x51, 0 }, /* vb */
+ { 0x52, 0x22 }, /* "matrix coefficient 4" */
+ { 0x53, 0x5e }, /* "matrix coefficient 5" */
+ { 0x54, 0x80 }, /* "matrix coefficient 6" */
+ { REG_COM13, COM13_GAMMA|COM13_UVSAT },
+ { 0xff, 0xff },
+};
+
+static struct regval_list ov7670_fmt_rgb565[] = {
+ { REG_COM7, COM7_RGB }, /* Selects RGB mode */
+ { REG_RGB444, 0 }, /* No RGB444 please */
+ { REG_COM1, 0x0 },
+ { REG_COM15, COM15_RGB565 },
+ { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */
+ { 0x4f, 0xb3 }, /* "matrix coefficient 1" */
+ { 0x50, 0xb3 }, /* "matrix coefficient 2" */
+ { 0x51, 0 }, /* vb */
+ { 0x52, 0x3d }, /* "matrix coefficient 4" */
+ { 0x53, 0xa7 }, /* "matrix coefficient 5" */
+ { 0x54, 0xe4 }, /* "matrix coefficient 6" */
+ { REG_COM13, COM13_GAMMA|COM13_UVSAT },
+ { 0xff, 0xff },
+};
+
+static struct regval_list ov7670_fmt_rgb444[] = {
+ { REG_COM7, COM7_RGB }, /* Selects RGB mode */
+ { REG_RGB444, R444_ENABLE }, /* Enable xxxxrrrr ggggbbbb */
+ { REG_COM1, 0x40 }, /* Magic reserved bit */
+ { REG_COM15, COM15_R01FE|COM15_RGB565 }, /* Data range needed? */
+ { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */
+ { 0x4f, 0xb3 }, /* "matrix coefficient 1" */
+ { 0x50, 0xb3 }, /* "matrix coefficient 2" */
+ { 0x51, 0 }, /* vb */
+ { 0x52, 0x3d }, /* "matrix coefficient 4" */
+ { 0x53, 0xa7 }, /* "matrix coefficient 5" */
+ { 0x54, 0xe4 }, /* "matrix coefficient 6" */
+ { REG_COM13, COM13_GAMMA|COM13_UVSAT|0x2 }, /* Magic rsvd bit */
+ { 0xff, 0xff },
+};
+
+
+
+
+/*
+ * Low-level register I/O.
+ */
+
+static int ov7670_read(struct i2c_client *c, unsigned char reg,
+ unsigned char *value)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(c, reg);
+ if (ret >= 0)
+ *value = (unsigned char) ret;
+ return ret;
+}
+
+
+static int ov7670_write(struct i2c_client *c, unsigned char reg,
+ unsigned char value)
+{
+ return i2c_smbus_write_byte_data(c, reg, value);
+}
+
+
+/*
+ * Write a list of register settings; ff/ff stops the process.
+ */
+static int ov7670_write_array(struct i2c_client *c, struct regval_list *vals)
+{
+ while (vals->reg_num != 0xff || vals->value != 0xff) {
+ int ret = ov7670_write(c, vals->reg_num, vals->value);
+ if (ret < 0)
+ return ret;
+ vals++;
+ }
+ return 0;
+}
+
+
+/*
+ * Stuff that knows about the sensor.
+ */
+static void ov7670_reset(struct i2c_client *client)
+{
+ ov7670_write(client, REG_COM7, COM7_RESET);
+ msleep(1);
+}
+
+
+static int ov7670_init(struct i2c_client *client)
+{
+ return ov7670_write_array(client, ov7670_default_regs);
+}
+
+
+
+static int ov7670_detect(struct i2c_client *client)
+{
+ unsigned char v;
+ int ret;
+
+ ret = ov7670_init(client);
+ if (ret < 0)
+ return ret;
+ ret = ov7670_read(client, REG_MIDH, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0x7f) /* OV manuf. id. */
+ return -ENODEV;
+ ret = ov7670_read(client, REG_MIDL, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0xa2)
+ return -ENODEV;
+ /*
+ * OK, we know we have an OmniVision chip...but which one?
+ */
+ ret = ov7670_read(client, REG_PID, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0x76) /* PID + VER = 0x76 / 0x73 */
+ return -ENODEV;
+ ret = ov7670_read(client, REG_VER, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0x73) /* PID + VER = 0x76 / 0x73 */
+ return -ENODEV;
+ return 0;
+}
+
+
+/*
+ * Store information about the video data format. The color matrix
+ * is deeply tied into the format, so keep the relevant values here.
+ * The magic matrix nubmers come from OmniVision.
+ */
+static struct ov7670_format_struct {
+ __u8 *desc;
+ __u32 pixelformat;
+ struct regval_list *regs;
+ int cmatrix[CMATRIX_LEN];
+} ov7670_formats[] = {
+ {
+ .desc = "YUYV 4:2:2",
+ .pixelformat = V4L2_PIX_FMT_YUYV,
+ .regs = ov7670_fmt_yuv422,
+ .cmatrix = { 128, -128, 0, -34, -94, 128 },
+ },
+ {
+ .desc = "RGB 444",
+ .pixelformat = V4L2_PIX_FMT_RGB444,
+ .regs = ov7670_fmt_rgb444,
+ .cmatrix = { 179, -179, 0, -61, -176, 228 },
+ },
+ {
+ .desc = "RGB 565",
+ .pixelformat = V4L2_PIX_FMT_RGB565,
+ .regs = ov7670_fmt_rgb565,
+ .cmatrix = { 179, -179, 0, -61, -176, 228 },
+ },
+};
+#define N_OV7670_FMTS (sizeof(ov7670_formats)/sizeof(ov7670_formats[0]))
+
+/*
+ * All formats we support are 2 bytes/pixel.
+ */
+#define BYTES_PER_PIXEL 2
+
+/*
+ * Then there is the issue of window sizes. Try to capture the info here.
+ */
+
+/*
+ * QCIF mode is done (by OV) in a very strange way - it actually looks like
+ * VGA with weird scaling options - they do *not* use the canned QCIF mode
+ * which is allegedly provided by the sensor. So here's the weird register
+ * settings.
+ */
+static struct regval_list ov7670_qcif_regs[] = {
+ { REG_COM3, COM3_SCALEEN|COM3_DCWEN },
+ { REG_COM3, COM3_DCWEN },
+ { REG_COM14, COM14_DCWEN | 0x01},
+ { 0x73, 0xf1 },
+ { 0xa2, 0x52 },
+ { 0x7b, 0x1c },
+ { 0x7c, 0x28 },
+ { 0x7d, 0x3c },
+ { 0x7f, 0x69 },
+ { REG_COM9, 0x38 },
+ { 0xa1, 0x0b },
+ { 0x74, 0x19 },
+ { 0x9a, 0x80 },
+ { 0x43, 0x14 },
+ { REG_COM13, 0xc0 },
+ { 0xff, 0xff },
+};
+
+static struct ov7670_win_size {
+ int width;
+ int height;
+ unsigned char com7_bit;
+ int hstart; /* Start/stop values for the camera. Note */
+ int hstop; /* that they do not always make complete */
+ int vstart; /* sense to humans, but evidently the sensor */
+ int vstop; /* will do the right thing... */
+ struct regval_list *regs; /* Regs to tweak */
+/* h/vref stuff */
+} ov7670_win_sizes[] = {
+ /* VGA */
+ {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .com7_bit = COM7_FMT_VGA,
+ .hstart = 158, /* These values from */
+ .hstop = 14, /* Omnivision */
+ .vstart = 10,
+ .vstop = 490,
+ .regs = NULL,
+ },
+ /* CIF */
+ {
+ .width = CIF_WIDTH,
+ .height = CIF_HEIGHT,
+ .com7_bit = COM7_FMT_CIF,
+ .hstart = 170, /* Empirically determined */
+ .hstop = 90,
+ .vstart = 14,
+ .vstop = 494,
+ .regs = NULL,
+ },
+ /* QVGA */
+ {
+ .width = QVGA_WIDTH,
+ .height = QVGA_HEIGHT,
+ .com7_bit = COM7_FMT_QVGA,
+ .hstart = 164, /* Empirically determined */
+ .hstop = 20,
+ .vstart = 14,
+ .vstop = 494,
+ .regs = NULL,
+ },
+ /* QCIF */
+ {
+ .width = QCIF_WIDTH,
+ .height = QCIF_HEIGHT,
+ .com7_bit = COM7_FMT_VGA, /* see comment above */
+ .hstart = 456, /* Empirically determined */
+ .hstop = 24,
+ .vstart = 14,
+ .vstop = 494,
+ .regs = ov7670_qcif_regs,
+ },
+};
+
+#define N_WIN_SIZES (sizeof(ov7670_win_sizes)/sizeof(ov7670_win_sizes[0]))
+
+
+/*
+ * Store a set of start/stop values into the camera.
+ */
+static int ov7670_set_hw(struct i2c_client *client, int hstart, int hstop,
+ int vstart, int vstop)
+{
+ int ret;
+ unsigned char v;
+/*
+ * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of
+ * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is
+ * a mystery "edge offset" value in the top two bits of href.
+ */
+ ret = ov7670_write(client, REG_HSTART, (hstart >> 3) & 0xff);
+ ret += ov7670_write(client, REG_HSTOP, (hstop >> 3) & 0xff);
+ ret += ov7670_read(client, REG_HREF, &v);
+ v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7);
+ msleep(10);
+ ret += ov7670_write(client, REG_HREF, v);
+/*
+ * Vertical: similar arrangement, but only 10 bits.
+ */
+ ret += ov7670_write(client, REG_VSTART, (vstart >> 2) & 0xff);
+ ret += ov7670_write(client, REG_VSTOP, (vstop >> 2) & 0xff);
+ ret += ov7670_read(client, REG_VREF, &v);
+ v = (v & 0xf0) | ((vstop & 0x3) << 2) | (vstart & 0x3);
+ msleep(10);
+ ret += ov7670_write(client, REG_VREF, v);
+ return ret;
+}
+
+
+static int ov7670_enum_fmt(struct i2c_client *c, struct v4l2_fmtdesc *fmt)
+{
+ struct ov7670_format_struct *ofmt;
+
+ if (fmt->index >= N_OV7670_FMTS)
+ return -EINVAL;
+
+ ofmt = ov7670_formats + fmt->index;
+ fmt->flags = 0;
+ strcpy(fmt->description, ofmt->desc);
+ fmt->pixelformat = ofmt->pixelformat;
+ return 0;
+}
+
+
+static int ov7670_try_fmt(struct i2c_client *c, struct v4l2_format *fmt,
+ struct ov7670_format_struct **ret_fmt,
+ struct ov7670_win_size **ret_wsize)
+{
+ int index;
+ struct ov7670_win_size *wsize;
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+ for (index = 0; index < N_OV7670_FMTS; index++)
+ if (ov7670_formats[index].pixelformat == pix->pixelformat)
+ break;
+ if (index >= N_OV7670_FMTS)
+ return -EINVAL;
+ if (ret_fmt != NULL)
+ *ret_fmt = ov7670_formats + index;
+ /*
+ * Fields: the OV devices claim to be progressive.
+ */
+ if (pix->field == V4L2_FIELD_ANY)
+ pix->field = V4L2_FIELD_NONE;
+ else if (pix->field != V4L2_FIELD_NONE)
+ return -EINVAL;
+ /*
+ * Round requested image size down to the nearest
+ * we support, but not below the smallest.
+ */
+ for (wsize = ov7670_win_sizes; wsize < ov7670_win_sizes + N_WIN_SIZES;
+ wsize++)
+ if (pix->width >= wsize->width && pix->height >= wsize->height)
+ break;
+ if (wsize >= ov7670_win_sizes + N_WIN_SIZES)
+ wsize--; /* Take the smallest one */
+ if (ret_wsize != NULL)
+ *ret_wsize = wsize;
+ /*
+ * Note the size we'll actually handle.
+ */
+ pix->width = wsize->width;
+ pix->height = wsize->height;
+ pix->bytesperline = pix->width*BYTES_PER_PIXEL;
+ pix->sizeimage = pix->height*pix->bytesperline;
+ return 0;
+}
+
+/*
+ * Set a format.
+ */
+static int ov7670_s_fmt(struct i2c_client *c, struct v4l2_format *fmt)
+{
+ int ret;
+ struct ov7670_format_struct *ovfmt;
+ struct ov7670_win_size *wsize;
+ struct ov7670_info *info = i2c_get_clientdata(c);
+ unsigned char com7;
+
+ ret = ov7670_try_fmt(c, fmt, &ovfmt, &wsize);
+ if (ret)
+ return ret;
+ /*
+ * COM7 is a pain in the ass, it doesn't like to be read then
+ * quickly written afterward. But we have everything we need
+ * to set it absolutely here, as long as the format-specific
+ * register sets list it first.
+ */
+ com7 = ovfmt->regs[0].value;
+ com7 |= wsize->com7_bit;
+ ov7670_write(c, REG_COM7, com7);
+ /*
+ * Now write the rest of the array. Also store start/stops
+ */
+ ov7670_write_array(c, ovfmt->regs + 1);
+ ov7670_set_hw(c, wsize->hstart, wsize->hstop, wsize->vstart,
+ wsize->vstop);
+ ret = 0;
+ if (wsize->regs)
+ ret = ov7670_write_array(c, wsize->regs);
+ info->fmt = ovfmt;
+ return 0;
+}
+
+/*
+ * Implement G/S_PARM. There is a "high quality" mode we could try
+ * to do someday; for now, we just do the frame rate tweak.
+ */
+static int ov7670_g_parm(struct i2c_client *c, struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+ unsigned char clkrc;
+ int ret;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ ret = ov7670_read(c, REG_CLKRC, &clkrc);
+ if (ret < 0)
+ return ret;
+ memset(cp, 0, sizeof(struct v4l2_captureparm));
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+ cp->timeperframe.numerator = 1;
+ cp->timeperframe.denominator = OV7670_FRAME_RATE;
+ if ((clkrc & CLK_EXT) == 0 && (clkrc & CLK_SCALE) > 1)
+ cp->timeperframe.denominator /= (clkrc & CLK_SCALE);
+ return 0;
+}
+
+static int ov7670_s_parm(struct i2c_client *c, struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+ unsigned char clkrc;
+ int ret, div;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (cp->extendedmode != 0)
+ return -EINVAL;
+ /*
+ * CLKRC has a reserved bit, so let's preserve it.
+ */
+ ret = ov7670_read(c, REG_CLKRC, &clkrc);
+ if (ret < 0)
+ return ret;
+ if (tpf->numerator == 0 || tpf->denominator == 0)
+ div = 1; /* Reset to full rate */
+ else
+ div = (tpf->numerator*OV7670_FRAME_RATE)/tpf->denominator;
+ if (div == 0)
+ div = 1;
+ else if (div > CLK_SCALE)
+ div = CLK_SCALE;
+ clkrc = (clkrc & 0x80) | div;
+ tpf->numerator = 1;
+ tpf->denominator = OV7670_FRAME_RATE/div;
+ return ov7670_write(c, REG_CLKRC, clkrc);
+}
+
+
+
+/*
+ * Code for dealing with controls.
+ */
+
+
+
+
+
+static int ov7670_store_cmatrix(struct i2c_client *client,
+ int matrix[CMATRIX_LEN])
+{
+ int i, ret;
+ unsigned char signbits;
+
+ /*
+ * Weird crap seems to exist in the upper part of
+ * the sign bits register, so let's preserve it.
+ */
+ ret = ov7670_read(client, REG_CMATRIX_SIGN, &signbits);
+ signbits &= 0xc0;
+
+ for (i = 0; i < CMATRIX_LEN; i++) {
+ unsigned char raw;
+
+ if (matrix[i] < 0) {
+ signbits |= (1 << i);
+ if (matrix[i] < -255)
+ raw = 0xff;
+ else
+ raw = (-1 * matrix[i]) & 0xff;
+ }
+ else {
+ if (matrix[i] > 255)
+ raw = 0xff;
+ else
+ raw = matrix[i] & 0xff;
+ }
+ ret += ov7670_write(client, REG_CMATRIX_BASE + i, raw);
+ }
+ ret += ov7670_write(client, REG_CMATRIX_SIGN, signbits);
+ return ret;
+}
+
+
+/*
+ * Hue also requires messing with the color matrix. It also requires
+ * trig functions, which tend not to be well supported in the kernel.
+ * So here is a simple table of sine values, 0-90 degrees, in steps
+ * of five degrees. Values are multiplied by 1000.
+ *
+ * The following naive approximate trig functions require an argument
+ * carefully limited to -180 <= theta <= 180.
+ */
+#define SIN_STEP 5
+static const int ov7670_sin_table[] = {
+ 0, 87, 173, 258, 342, 422,
+ 499, 573, 642, 707, 766, 819,
+ 866, 906, 939, 965, 984, 996,
+ 1000
+};
+
+static int ov7670_sine(int theta)
+{
+ int chs = 1;
+ int sine;
+
+ if (theta < 0) {
+ theta = -theta;
+ chs = -1;
+ }
+ if (theta <= 90)
+ sine = ov7670_sin_table[theta/SIN_STEP];
+ else {
+ theta -= 90;
+ sine = 1000 - ov7670_sin_table[theta/SIN_STEP];
+ }
+ return sine*chs;
+}
+
+static int ov7670_cosine(int theta)
+{
+ theta = 90 - theta;
+ if (theta > 180)
+ theta -= 360;
+ else if (theta < -180)
+ theta += 360;
+ return ov7670_sine(theta);
+}
+
+
+
+
+static void ov7670_calc_cmatrix(struct ov7670_info *info,
+ int matrix[CMATRIX_LEN])
+{
+ int i;
+ /*
+ * Apply the current saturation setting first.
+ */
+ for (i = 0; i < CMATRIX_LEN; i++)
+ matrix[i] = (info->fmt->cmatrix[i]*info->sat) >> 7;
+ /*
+ * Then, if need be, rotate the hue value.
+ */
+ if (info->hue != 0) {
+ int sinth, costh, tmpmatrix[CMATRIX_LEN];
+
+ memcpy(tmpmatrix, matrix, CMATRIX_LEN*sizeof(int));
+ sinth = ov7670_sine(info->hue);
+ costh = ov7670_cosine(info->hue);
+
+ matrix[0] = (matrix[3]*sinth + matrix[0]*costh)/1000;
+ matrix[1] = (matrix[4]*sinth + matrix[1]*costh)/1000;
+ matrix[2] = (matrix[5]*sinth + matrix[2]*costh)/1000;
+ matrix[3] = (matrix[3]*costh - matrix[0]*sinth)/1000;
+ matrix[4] = (matrix[4]*costh - matrix[1]*sinth)/1000;
+ matrix[5] = (matrix[5]*costh - matrix[2]*sinth)/1000;
+ }
+}
+
+
+
+static int ov7670_t_sat(struct i2c_client *client, int value)
+{
+ struct ov7670_info *info = i2c_get_clientdata(client);
+ int matrix[CMATRIX_LEN];
+ int ret;
+
+ info->sat = value;
+ ov7670_calc_cmatrix(info, matrix);
+ ret = ov7670_store_cmatrix(client, matrix);
+ return ret;
+}
+
+static int ov7670_q_sat(struct i2c_client *client, __s32 *value)
+{
+ struct ov7670_info *info = i2c_get_clientdata(client);
+
+ *value = info->sat;
+ return 0;
+}
+
+static int ov7670_t_hue(struct i2c_client *client, int value)
+{
+ struct ov7670_info *info = i2c_get_clientdata(client);
+ int matrix[CMATRIX_LEN];
+ int ret;
+
+ if (value < -180 || value > 180)
+ return -EINVAL;
+ info->hue = value;
+ ov7670_calc_cmatrix(info, matrix);
+ ret = ov7670_store_cmatrix(client, matrix);
+ return ret;
+}
+
+
+static int ov7670_q_hue(struct i2c_client *client, __s32 *value)
+{
+ struct ov7670_info *info = i2c_get_clientdata(client);
+
+ *value = info->hue;
+ return 0;
+}
+
+
+/*
+ * Some weird registers seem to store values in a sign/magnitude format!
+ */
+static unsigned char ov7670_sm_to_abs(unsigned char v)
+{
+ if ((v & 0x80) == 0)
+ return v + 128;
+ else
+ return 128 - (v & 0x7f);
+}
+
+
+static unsigned char ov7670_abs_to_sm(unsigned char v)
+{
+ if (v > 127)
+ return v & 0x7f;
+ else
+ return (128 - v) | 0x80;
+}
+
+static int ov7670_t_brightness(struct i2c_client *client, int value)
+{
+ unsigned char com8, v;
+ int ret;
+
+ ov7670_read(client, REG_COM8, &com8);
+ com8 &= ~COM8_AEC;
+ ov7670_write(client, REG_COM8, com8);
+ v = ov7670_abs_to_sm(value);
+ ret = ov7670_write(client, REG_BRIGHT, v);
+ return ret;
+}
+
+static int ov7670_q_brightness(struct i2c_client *client, __s32 *value)
+{
+ unsigned char v;
+ int ret = ov7670_read(client, REG_BRIGHT, &v);
+
+ *value = ov7670_sm_to_abs(v);
+ return ret;
+}
+
+static int ov7670_t_contrast(struct i2c_client *client, int value)
+{
+ return ov7670_write(client, REG_CONTRAS, (unsigned char) value);
+}
+
+static int ov7670_q_contrast(struct i2c_client *client, __s32 *value)
+{
+ unsigned char v;
+ int ret = ov7670_read(client, REG_CONTRAS, &v);
+
+ *value = v;
+ return ret;
+}
+
+static int ov7670_q_hflip(struct i2c_client *client, __s32 *value)
+{
+ int ret;
+ unsigned char v;
+
+ ret = ov7670_read(client, REG_MVFP, &v);
+ *value = (v & MVFP_MIRROR) == MVFP_MIRROR;
+ return ret;
+}
+
+
+static int ov7670_t_hflip(struct i2c_client *client, int value)
+{
+ unsigned char v;
+ int ret;
+
+ ret = ov7670_read(client, REG_MVFP, &v);
+ if (value)
+ v |= MVFP_MIRROR;
+ else
+ v &= ~MVFP_MIRROR;
+ msleep(10); /* FIXME */
+ ret += ov7670_write(client, REG_MVFP, v);
+ return ret;
+}
+
+
+
+static int ov7670_q_vflip(struct i2c_client *client, __s32 *value)
+{
+ int ret;
+ unsigned char v;
+
+ ret = ov7670_read(client, REG_MVFP, &v);
+ *value = (v & MVFP_FLIP) == MVFP_FLIP;
+ return ret;
+}
+
+
+static int ov7670_t_vflip(struct i2c_client *client, int value)
+{
+ unsigned char v;
+ int ret;
+
+ ret = ov7670_read(client, REG_MVFP, &v);
+ if (value)
+ v |= MVFP_FLIP;
+ else
+ v &= ~MVFP_FLIP;
+ msleep(10); /* FIXME */
+ ret += ov7670_write(client, REG_MVFP, v);
+ return ret;
+}
+
+
+static struct ov7670_control {
+ struct v4l2_queryctrl qc;
+ int (*query)(struct i2c_client *c, __s32 *value);
+ int (*tweak)(struct i2c_client *c, int value);
+} ov7670_controls[] =
+{
+ {
+ .qc = {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = 0x80,
+ .flags = V4L2_CTRL_FLAG_SLIDER
+ },
+ .tweak = ov7670_t_brightness,
+ .query = ov7670_q_brightness,
+ },
+ {
+ .qc = {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 127,
+ .step = 1,
+ .default_value = 0x40, /* XXX ov7670 spec */
+ .flags = V4L2_CTRL_FLAG_SLIDER
+ },
+ .tweak = ov7670_t_contrast,
+ .query = ov7670_q_contrast,
+ },
+ {
+ .qc = {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 256,
+ .step = 1,
+ .default_value = 0x80,
+ .flags = V4L2_CTRL_FLAG_SLIDER
+ },
+ .tweak = ov7670_t_sat,
+ .query = ov7670_q_sat,
+ },
+ {
+ .qc = {
+ .id = V4L2_CID_HUE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "HUE",
+ .minimum = -180,
+ .maximum = 180,
+ .step = 5,
+ .default_value = 0,
+ .flags = V4L2_CTRL_FLAG_SLIDER
+ },
+ .tweak = ov7670_t_hue,
+ .query = ov7670_q_hue,
+ },
+ {
+ .qc = {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vertical flip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ },
+ .tweak = ov7670_t_vflip,
+ .query = ov7670_q_vflip,
+ },
+ {
+ .qc = {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Horizontal mirror",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ },
+ .tweak = ov7670_t_hflip,
+ .query = ov7670_q_hflip,
+ },
+};
+#define N_CONTROLS (sizeof(ov7670_controls)/sizeof(ov7670_controls[0]))
+
+static struct ov7670_control *ov7670_find_control(__u32 id)
+{
+ int i;
+
+ for (i = 0; i < N_CONTROLS; i++)
+ if (ov7670_controls[i].qc.id == id)
+ return ov7670_controls + i;
+ return NULL;
+}
+
+
+static int ov7670_queryctrl(struct i2c_client *client,
+ struct v4l2_queryctrl *qc)
+{
+ struct ov7670_control *ctrl = ov7670_find_control(qc->id);
+
+ if (ctrl == NULL)
+ return -EINVAL;
+ *qc = ctrl->qc;
+ return 0;
+}
+
+static int ov7670_g_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+ struct ov7670_control *octrl = ov7670_find_control(ctrl->id);
+ int ret;
+
+ if (octrl == NULL)
+ return -EINVAL;
+ ret = octrl->query(client, &ctrl->value);
+ if (ret >= 0)
+ return 0;
+ return ret;
+}
+
+static int ov7670_s_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
+{
+ struct ov7670_control *octrl = ov7670_find_control(ctrl->id);
+ int ret;
+
+ if (octrl == NULL)
+ return -EINVAL;
+ ret = octrl->tweak(client, ctrl->value);
+ if (ret >= 0)
+ return 0;
+ return ret;
+}
+
+
+
+
+
+
+/*
+ * Basic i2c stuff.
+ */
+static struct i2c_driver ov7670_driver;
+
+static int ov7670_attach(struct i2c_adapter *adapter)
+{
+ int ret;
+ struct i2c_client *client;
+ struct ov7670_info *info;
+
+ /*
+ * For now: only deal with adapters we recognize.
+ */
+ if (adapter->id != I2C_HW_SMBUS_CAFE)
+ return -ENODEV;
+
+ client = kzalloc(sizeof (struct i2c_client), GFP_KERNEL);
+ if (! client)
+ return -ENOMEM;
+ client->adapter = adapter;
+ client->addr = OV7670_I2C_ADDR;
+ client->driver = &ov7670_driver,
+ strcpy(client->name, "OV7670");
+ /*
+ * Set up our info structure.
+ */
+ info = kzalloc(sizeof (struct ov7670_info), GFP_KERNEL);
+ if (! info) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+ info->fmt = &ov7670_formats[0];
+ info->sat = 128; /* Review this */
+ i2c_set_clientdata(client, info);
+
+ /*
+ * Make sure it's an ov7670
+ */
+ ret = ov7670_detect(client);
+ if (ret)
+ goto out_free_info;
+ i2c_attach_client(client);
+ return 0;
+
+ out_free_info:
+ kfree(info);
+ out_free:
+ kfree(client);
+ return ret;
+}
+
+
+static int ov7670_detach(struct i2c_client *client)
+{
+ i2c_detach_client(client);
+ kfree(i2c_get_clientdata(client));
+ kfree(client);
+ return 0;
+}
+
+
+static int ov7670_command(struct i2c_client *client, unsigned int cmd,
+ void *arg)
+{
+ switch (cmd) {
+ case VIDIOC_INT_G_CHIP_IDENT:
+ * (enum v4l2_chip_ident *) arg = V4L2_IDENT_OV7670;
+ return 0;
+
+ case VIDIOC_INT_RESET:
+ ov7670_reset(client);
+ return 0;
+
+ case VIDIOC_INT_INIT:
+ return ov7670_init(client);
+
+ case VIDIOC_ENUM_FMT:
+ return ov7670_enum_fmt(client, (struct v4l2_fmtdesc *) arg);
+ case VIDIOC_TRY_FMT:
+ return ov7670_try_fmt(client, (struct v4l2_format *) arg, NULL, NULL);
+ case VIDIOC_S_FMT:
+ return ov7670_s_fmt(client, (struct v4l2_format *) arg);
+ case VIDIOC_QUERYCTRL:
+ return ov7670_queryctrl(client, (struct v4l2_queryctrl *) arg);
+ case VIDIOC_S_CTRL:
+ return ov7670_s_ctrl(client, (struct v4l2_control *) arg);
+ case VIDIOC_G_CTRL:
+ return ov7670_g_ctrl(client, (struct v4l2_control *) arg);
+ case VIDIOC_S_PARM:
+ return ov7670_s_parm(client, (struct v4l2_streamparm *) arg);
+ case VIDIOC_G_PARM:
+ return ov7670_g_parm(client, (struct v4l2_streamparm *) arg);
+ }
+ return -EINVAL;
+}
+
+
+
+static struct i2c_driver ov7670_driver = {
+ .driver = {
+ .name = "ov7670",
+ },
+ .id = I2C_DRIVERID_OV7670,
+ .class = I2C_CLASS_CAM_DIGITAL,
+ .attach_adapter = ov7670_attach,
+ .detach_client = ov7670_detach,
+ .command = ov7670_command,
+};
+
+
+/*
+ * Module initialization
+ */
+static int __init ov7670_mod_init(void)
+{
+ printk(KERN_NOTICE "OmniVision ov7670 sensor driver, at your service\n");
+ return i2c_add_driver(&ov7670_driver);
+}
+
+static void __exit ov7670_mod_exit(void)
+{
+ i2c_del_driver(&ov7670_driver);
+}
+
+module_init(ov7670_mod_init);
+module_exit(ov7670_mod_exit);
+ MAX_LNUM
#endif /* PLANB_GSCANLINE */
);
- if ((pb->rawbuf = (unsigned char**) kmalloc (npage
+ if ((pb->rawbuf = kmalloc(npage
* sizeof(unsigned long), GFP_KERNEL)) == 0)
return -ENOMEM;
for (i = 0; i < npage; i++) {
sizeof(decoder_ops[0]))) - 1;
hdw->decoder_ctrl = &ctxt->ctrl;
cp->handler = &ctxt->handler;
+ {
+ /*
+ Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit
+ of nuttiness for cx25840 causes that module to
+ correctly set up its video scaling. This is really
+ a problem in the cx25840 module itself, but we work
+ around it here. The problem has not been seen in
+ ivtv because there VBI is supported and set up. We
+ don't do VBI here (at least not yet) and thus we
+ never attempted to even set it up.
+ */
+ struct v4l2_format fmt;
+ memset(&fmt,0,sizeof(fmt));
+ fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
+ pvr2_i2c_client_cmd(ctxt->client,VIDIOC_S_FMT,&fmt);
+ }
pvr2_trace(PVR2_TRACE_CHIPS,"i2c 0x%x cx2584x V4L2 handler set up",
cp->client->addr);
return !0;
return 0;
}
-static int ctrl_hres_max_get(struct pvr2_ctrl *cptr,int *vp)
-{
- /* If we're dealing with a 24xxx device, force the horizontal
- maximum to be 720 no matter what, since we can't get the device
- to work properly with any other value. Otherwise just return
- the normal value. */
- *vp = cptr->info->def.type_int.max_value;
- if (cptr->hdw->hdw_type == PVR2_HDW_TYPE_24XXX) *vp = 720;
- return 0;
-}
-
-static int ctrl_hres_min_get(struct pvr2_ctrl *cptr,int *vp)
-{
- /* If we're dealing with a 24xxx device, force the horizontal
- minimum to be 720 no matter what, since we can't get the device
- to work properly with any other value. Otherwise just return
- the normal value. */
- *vp = cptr->info->def.type_int.min_value;
- if (cptr->hdw->hdw_type == PVR2_HDW_TYPE_24XXX) *vp = 720;
- return 0;
-}
-
static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp)
{
/* Actual maximum depends on the video standard in effect. */
.default_value = 720,
DEFREF(res_hor),
DEFINT(19,720),
- /* Hook in check for clamp on horizontal resolution in
- order to avoid unsolved problem involving cx25840. */
- .get_max_value = ctrl_hres_max_get,
- .get_min_value = ctrl_hres_min_get,
},{
.desc = "Vertical capture resolution",
.name = "resolution_ver",
}
}
+
+/* This is a special entry point for cases of I2C transaction attempts to
+ the IR receiver. The implementation here simulates the IR receiver by
+ issuing a command to the FX2 firmware and using that response to return
+ what the real I2C receiver would have returned. We use this for 24xxx
+ devices, where the IR receiver chip has been removed and replaced with
+ FX2 related logic. */
+static int i2c_24xxx_ir(struct pvr2_hdw *hdw,
+ u8 i2c_addr,u8 *wdata,u16 wlen,u8 *rdata,u16 rlen)
+{
+ u8 dat[4];
+ unsigned int stat;
+
+ if (!(rlen || wlen)) {
+ /* This is a probe attempt. Just let it succeed. */
+ return 0;
+ }
+
+ /* We don't understand this kind of transaction */
+ if ((wlen != 0) || (rlen == 0)) return -EIO;
+
+ if (rlen < 3) {
+ /* Mike Isely <isely@pobox.com> Appears to be a probe
+ attempt from lirc. Just fill in zeroes and return. If
+ we try instead to do the full transaction here, then bad
+ things seem to happen within the lirc driver module
+ (version 0.8.0-7 sources from Debian, when run under
+ vanilla 2.6.17.6 kernel) - and I don't have the patience
+ to chase it down. */
+ if (rlen > 0) rdata[0] = 0;
+ if (rlen > 1) rdata[1] = 0;
+ return 0;
+ }
+
+ /* Issue a command to the FX2 to read the IR receiver. */
+ LOCK_TAKE(hdw->ctl_lock); do {
+ hdw->cmd_buffer[0] = 0xec;
+ stat = pvr2_send_request(hdw,
+ hdw->cmd_buffer,1,
+ hdw->cmd_buffer,4);
+ dat[0] = hdw->cmd_buffer[0];
+ dat[1] = hdw->cmd_buffer[1];
+ dat[2] = hdw->cmd_buffer[2];
+ dat[3] = hdw->cmd_buffer[3];
+ } while (0); LOCK_GIVE(hdw->ctl_lock);
+
+ /* Give up if that operation failed. */
+ if (stat != 0) return stat;
+
+ /* Mangle the results into something that looks like the real IR
+ receiver. */
+ rdata[2] = 0xc1;
+ if (dat[0] != 1) {
+ /* No code received. */
+ rdata[0] = 0;
+ rdata[1] = 0;
+ } else {
+ u16 val;
+ /* Mash the FX2 firmware-provided IR code into something
+ that the normal i2c chip-level driver expects. */
+ val = dat[1];
+ val <<= 8;
+ val |= dat[2];
+ val >>= 1;
+ val &= ~0x0003;
+ val |= 0x8000;
+ rdata[0] = (val >> 8) & 0xffu;
+ rdata[1] = val & 0xffu;
+ }
+
+ return 0;
+}
+
/* This is a special entry point that is entered if an I2C operation is
attempted to a wm8775 chip on model 24xxx hardware. Autodetect of this
part doesn't work, but we know it is really there. So let's look for
{
unsigned int idx;
- // The default action for all possible I2C addresses is just to do
- // the transfer normally.
+ /* The default action for all possible I2C addresses is just to do
+ the transfer normally. */
for (idx = 0; idx < PVR2_I2C_FUNC_CNT; idx++) {
hdw->i2c_func[idx] = pvr2_i2c_basic_op;
}
- // If however we're dealing with new hardware, insert some hacks in
- // the I2C transfer stack to let things work better.
+ /* However, deal with various special cases for 24xxx hardware. */
if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) {
hdw->i2c_func[0x1b] = i2c_hack_wm8775;
hdw->i2c_func[0x44] = i2c_hack_cx25840;
+ hdw->i2c_func[0x18] = i2c_24xxx_ir;
}
// Configure the adapter and set up everything else related to it.
/* On 60Hz, it is using a higher Vertical Output Size */
if (!is_50hz)
- res+=(VRES_60HZ-480)>>1;
+ res += (VRES_60HZ - 480) >> 1;
/* height */
saa711x_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,
/* Activates task "B" */
saa711x_write(client, R_80_GLOBAL_CNTL_1,
- saa711x_read(client,R_80_GLOBAL_CNTL_1)|0x20);
+ saa711x_read(client,R_80_GLOBAL_CNTL_1) | 0x20);
return 0;
}
if (std & V4L2_STD_525_60) {
v4l_dbg(1, debug, client, "decoder set standard 60 Hz\n");
saa711x_writeregs(client, saa7115_cfg_60hz_video);
- saa711x_set_size(client,720,480);
+ saa711x_set_size(client, 720, 480);
} else {
v4l_dbg(1, debug, client, "decoder set standard 50 Hz\n");
saa711x_writeregs(client, saa7115_cfg_50hz_video);
- saa711x_set_size(client,720,576);
+ saa711x_set_size(client, 720, 576);
}
/* Register 0E - Bits D6-D4 on NO-AUTO mode
client->driver = &i2c_driver_saa711x;
snprintf(client->name, sizeof(client->name) - 1, "saa7115");
- for (i=0;i<0x0f;i++) {
+ for (i = 0; i < 0x0f; i++) {
saa711x_write(client, 0, i);
- name[i] = (saa711x_read(client, 0) &0x0f) +'0';
- if (name[i]>'9')
- name[i]+='a'-'9'-1;
+ name[i] = (saa711x_read(client, 0) & 0x0f) + '0';
+ if (name[i] > '9')
+ name[i] += 'a' - '9' - 1;
}
- name[i]='\0';
+ name[i] = '\0';
saa711x_write(client, 0, 5);
chip_id = saa711x_read(client, 0) & 0x0f;
/*
* SAA713x ALSA support for V4L
*
- *
- * Caveats:
- * - Volume doesn't work (it's always at max)
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, version 2
snd_card_saa7134_pcm_t *pcm;
snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream);
struct saa7134_dev *dev = saa7134->dev;
- int err;
+ int amux, err;
mutex_lock(&dev->dmasound.lock);
dev->dmasound.read_count = 0;
dev->dmasound.read_offset = 0;
+ amux = dev->input->amux;
+ if ((amux < 1) || (amux > 3))
+ amux = 1;
+ dev->dmasound.input = amux - 1;
+
mutex_unlock(&dev->dmasound.lock);
pcm = kzalloc(sizeof(*pcm), GFP_KERNEL);
struct snd_ctl_elem_value * ucontrol)
{
snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol);
+ struct saa7134_dev *dev = chip->dev;
+
int change, addr = kcontrol->private_value;
int left, right;
if (right > 20)
right = 20;
spin_lock_irq(&chip->mixer_lock);
- change = chip->mixer_volume[addr][0] != left ||
- chip->mixer_volume[addr][1] != right;
- chip->mixer_volume[addr][0] = left;
- chip->mixer_volume[addr][1] = right;
+ change = 0;
+ if (chip->mixer_volume[addr][0] != left) {
+ change = 1;
+ right = left;
+ }
+ if (chip->mixer_volume[addr][1] != right) {
+ change = 1;
+ left = right;
+ }
+ if (change) {
+ switch (dev->pci->device) {
+ case PCI_DEVICE_ID_PHILIPS_SAA7134:
+ switch (addr) {
+ case MIXER_ADDR_TVTUNER:
+ left = 20;
+ break;
+ case MIXER_ADDR_LINE1:
+ saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x10,
+ (left > 10) ? 0x00 : 0x10);
+ break;
+ case MIXER_ADDR_LINE2:
+ saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x20,
+ (left > 10) ? 0x00 : 0x20);
+ break;
+ }
+ break;
+ case PCI_DEVICE_ID_PHILIPS_SAA7133:
+ case PCI_DEVICE_ID_PHILIPS_SAA7135:
+ switch (addr) {
+ case MIXER_ADDR_TVTUNER:
+ left = 20;
+ break;
+ case MIXER_ADDR_LINE1:
+ saa_andorb(0x0594, 0x10,
+ (left > 10) ? 0x00 : 0x10);
+ break;
+ case MIXER_ADDR_LINE2:
+ saa_andorb(0x0594, 0x20,
+ (left > 10) ? 0x00 : 0x20);
+ break;
+ }
+ break;
+ }
+ chip->mixer_volume[addr][0] = left;
+ chip->mixer_volume[addr][1] = right;
+ }
spin_unlock_irq(&chip->mixer_lock);
return change;
}
.vmux = 1,
.amux = TV,
.tv = 1,
+ .gpio = 0x0000000,
},{
.name = name_comp1,
.vmux = 3,
.amux = LINE2,
+ .gpio = 0x0200000,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
+ .gpio = 0x0200000,
}},
.radio = {
.name = name_radio,
.amux = LINE1,
},
},
+ [SAA7134_BOARD_PINNACLE_PCTV_310i] = {
+ .name = "Pinnacle PCTV 310i",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 0x000200000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 4,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 1,
+ .amux = LINE2,
+ },{
+ .name = name_comp2,
+ .vmux = 0,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
+ },
+ },
+ [SAA7134_BOARD_AVERMEDIA_STUDIO_507] = {
+ /* Mikhail Fedotov <mo_fedotov@mail.ru> */
+ .name = "Avermedia AVerTV Studio 507",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_FM1256_IH3,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT,
+ .gpiomask = 0x03,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x00,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE2,
+ .gpio = 0x00,
+ },{
+ .name = name_comp2,
+ .vmux = 3,
+ .amux = LINE2,
+ .gpio = 0x00,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ .gpio = 0x00,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = LINE2,
+ .gpio = 0x01,
+ },
+ .mute = {
+ .name = name_mute,
+ .amux = LINE1,
+ .gpio = 0x00,
+ },
+ },
+ [SAA7134_BOARD_VIDEOMATE_DVBT_200A] = {
+ /* Francis Barber <fedora@barber-family.id.au> */
+ .name = "Compro Videomate DVB-T200A",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 3,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 1,
+ .amux = LINE2,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ }},
+ },
+ [SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
+ /* Thomas Genty <tomlohave@gmail.com> */
+ .name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ },
+ },
+ [SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
+ .name = "Terratec Cinergy HT PCMCIA",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 6,
+ .amux = LINE1,
+ }},
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
.subdevice = 0x4860,
.driver_data = SAA7134_BOARD_ASUS_EUROPA2_HYBRID,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x11bd,
+ .subdevice = 0x002f,
+ .driver_data = SAA7134_BOARD_PINNACLE_PCTV_310i,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0x9715,
+ .driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_507,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1043,
+ .subdevice = 0x4876,
+ .driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x0070,
+ .subdevice = 0x6701,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x153b,
+ .subdevice = 0x1172,
+ .driver_data = SAA7134_BOARD_CINERGY_HT_PCMCIA,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
case SAA7134_BOARD_AVERMEDIA_305:
case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
case SAA7134_BOARD_AVERMEDIA_307:
+ case SAA7134_BOARD_AVERMEDIA_STUDIO_507:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
case SAA7134_BOARD_AVERMEDIA_777:
/* case SAA7134_BOARD_SABRENT_SBTTVFM: */ /* not finished yet */
case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
+ case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
case SAA7134_BOARD_MANLI_MTV001:
case SAA7134_BOARD_MANLI_MTV002:
case SAA7134_BOARD_BEHOLD_409FM:
break;
/* i2c remotes */
case SAA7134_BOARD_PINNACLE_PCTV_110i:
+ case SAA7134_BOARD_PINNACLE_PCTV_310i:
case SAA7134_BOARD_UPMOST_PURPLE_TV:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
dev->has_remote = SAA7134_REMOTE_I2C;
break;
case SAA7134_BOARD_AVERMEDIA_A169_B:
}
break;
case SAA7134_BOARD_PHILIPS_TIGER:
+ case SAA7134_BOARD_PINNACLE_PCTV_310i:
case SAA7134_BOARD_TEVION_DVBT_220RF:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
+ case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+ /* make the tda10046 find its eeprom */
+ {
+ u8 data[] = { 0x3c, 0x33, 0x60};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ }
+ break;
case SAA7134_BOARD_KWORLD_ATSC110:
{
/* enable tuner */
dev->name, i);
}
break;
+ case SAA7134_BOARD_VIDEOMATE_DVBT_200:
+ case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
+ /* The T200 and the T200A share the same pci id. Consequently,
+ * we are going to query eeprom to try to find out which one we
+ * are actually looking at. */
+
+ /* Don't do this if the board was specifically selected with an
+ * insmod option or if we have the default configuration T200*/
+ if(!dev->autodetected || (dev->eedata[0x41] == 0xd0))
+ break;
+ if(dev->eedata[0x41] == 0x02) {
+ /* Reconfigure board as T200A */
+ dev->board = SAA7134_BOARD_VIDEOMATE_DVBT_200A;
+ dev->tuner_type = saa7134_boards[dev->board].tuner_type;
+ dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
+ printk(KERN_INFO "%s: Reconfigured board as %s\n",
+ dev->name, saa7134_boards[dev->board].name);
+ } else {
+ printk(KERN_WARNING "%s: Unexpected tuner type info: %x in eeprom\n",
+ dev->name, dev->eedata[0x41]);
+ break;
+ }
+ break;
}
return 0;
}
must_configure_manually();
dev->board = SAA7134_BOARD_UNKNOWN;
}
+ dev->autodetected = card[dev->nr] != dev->board;
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
if (UNSET != tuner[dev->nr])
dev->tuner_type = tuner[dev->nr];
- printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
- dev->name,pci_dev->subsystem_vendor,
- pci_dev->subsystem_device,saa7134_boards[dev->board].name,
- dev->board, card[dev->nr] == dev->board ?
- "insmod option" : "autodetected");
+ printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+ dev->name,pci_dev->subsystem_vendor,
+ pci_dev->subsystem_device,saa7134_boards[dev->board].name,
+ dev->board, dev->autodetected ?
+ "autodetected" : "insmod option");
/* get mmio */
if (!request_mem_region(pci_resource_start(pci_dev,0),
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
+static int use_frontent = 0;
+module_param(use_frontent, int, 0644);
+MODULE_PARM_DESC(use_frontent,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
+
/* ------------------------------------------------------------------ */
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
{
return philips_tda6651_pll_set(0x60, fe, params);
}
-static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
+static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
const struct firmware **fw, char *name)
{
struct saa7134_dev *dev = fe->dvb->priv;
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_DEFAULT,
.if_freq = TDA10046_FREQ_3617,
- .request_firmware = philips_tu1216_request_firmware,
+ .request_firmware = philips_tda1004x_request_firmware,
};
/* ------------------------------------------------------------------ */
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_DEFAULT,
.if_freq = TDA10046_FREQ_3617,
- .request_firmware = philips_tu1216_request_firmware,
+ .request_firmware = philips_tda1004x_request_firmware,
};
/* ------------------------------------------------------------------ */
-static int philips_europa_tuner_init(struct dvb_frontend *fe)
+static int philips_td1316_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
return -EIO;
- msleep(1);
-
- /* switch the board to dvb mode */
- init_msg.addr = 0x43;
- init_msg.len = 0x02;
- msg[0] = 0x00;
- msg[1] = 0x40;
if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
- return -EIO;
-
+ fe->ops.i2c_gate_ctrl(fe, 0);
return 0;
}
return philips_tda6651_pll_set(0x61, fe, params);
}
+static int philips_europa_tuner_init(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 msg[] = { 0x00, 0x40};
+ struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
+
+
+ if (philips_td1316_tuner_init(fe))
+ return -EIO;
+ msleep(1);
+ if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
static int philips_europa_tuner_sleep(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
return 0;
}
/* ------------------------------------------------------------------ */
-static int philips_tiger_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int tda8290_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
{
- int ret;
struct saa7134_dev *dev = fe->dvb->priv;
static u8 tda8290_close[] = { 0x21, 0xc0};
static u8 tda8290_open[] = { 0x21, 0x80};
struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2};
-
- /* close tda8290 i2c bridge */
- tda8290_msg.buf = tda8290_close;
- ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
- if (ret != 1)
+ if (enable) {
+ tda8290_msg.buf = tda8290_close;
+ } else {
+ tda8290_msg.buf = tda8290_open;
+ }
+ if (i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1) != 1)
return -EIO;
msleep(20);
+ return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+static int philips_tiger_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ int ret;
+
ret = philips_tda827xa_pll_set(0x61, fe, params);
if (ret != 0)
return ret;
- /* open tda8290 i2c bridge */
- tda8290_msg.buf = tda8290_open;
- i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
- return ret;
+ return 0;
}
static int philips_tiger_tuner_init(struct dvb_frontend *fe)
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
+ .if_freq = TDA10046_FREQ_045,
+ .request_firmware = NULL,
+};
+/* ------------------------------------------------------------------ */
+
+static int cinergy_ht_tuner_init(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 data[] = { 0x3c, 0x33, 0x62};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+
+ if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
+ return -EIO;
+ return 0;
+}
+
+static int cinergy_ht_tuner_sleep(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 data[] = { 0x3c, 0x33, 0x60};
+ struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ philips_tda827xa_tuner_sleep( 0x61, fe);
+ return 0;
+}
+
+static struct tda1004x_config cinergy_ht_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X_GP01,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
/* ------------------------------------------------------------------ */
+static struct tda1004x_config pinnacle_pctv_310i_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
+ .if_freq = TDA10046_FREQ_045,
+ .request_firmware = philips_tda1004x_request_firmware,
+};
+
+/* ------------------------------------------------------------------ */
+
+static struct tda1004x_config hauppauge_hvr_1110_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
+ .if_freq = TDA10046_FREQ_045,
+ .request_firmware = philips_tda1004x_request_firmware,
+};
+
+/* ------------------------------------------------------------------ */
+
+static struct tda1004x_config asus_p7131_dual_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
+ .if_freq = TDA10046_FREQ_045,
+ .request_firmware = philips_tda1004x_request_firmware,
+};
+
static int asus_p7131_dual_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X_GPL,
+ .agc_config = TDA10046_AGC_TDA827X_GP00,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X_GPL,
+ .agc_config = TDA10046_AGC_TDA827X_GP00,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
+ .agc_config = TDA10046_AGC_TDA827X_GP11,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
&philips_tiger_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
+ dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
+ dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
+ }
+ break;
+ case SAA7134_BOARD_PINNACLE_PCTV_310i:
+ dev->dvb.frontend = dvb_attach(tda10046_attach,
+ &pinnacle_pctv_310i_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
+ dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
+ dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
+ }
+ break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
+ dev->dvb.frontend = dvb_attach(tda10046_attach,
+ &hauppauge_hvr_1110_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
dev->dvb.frontend = dvb_attach(tda10046_attach,
- &philips_tiger_config,
+ &asus_p7131_dual_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
dev->dvb.frontend->ops.tuner_ops.init = asus_p7131_dual_tuner_init;
dev->dvb.frontend->ops.tuner_ops.sleep = asus_p7131_dual_tuner_sleep;
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
}
break;
case SAA7134_BOARD_FLYDVB_TRIO:
- dev->dvb.frontend = dvb_attach(tda10046_attach,
- &lifeview_trio_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.sleep = lifeview_trio_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = lifeview_trio_tuner_set_params;
+ if(! use_frontent) { //terrestrial
+ dev->dvb.frontend = dvb_attach(tda10046_attach,
+ &lifeview_trio_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.tuner_ops.sleep = lifeview_trio_tuner_sleep;
+ dev->dvb.frontend->ops.tuner_ops.set_params =
+ lifeview_trio_tuner_set_params;
+ }
+ } else { //satellite
+ dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63,
+ &dev->i2c_adap, 0) == NULL) {
+ printk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__);
+ }
+ if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap,
+ 0x08, 0, 0) == NULL) {
+ printk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__);
+ }
+ }
}
break;
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params;
}
break;
+ case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
+ dev->dvb.frontend = dvb_attach(tda10046_attach,
+ &philips_europa_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
+ dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
+ }
+ break;
+ case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+ dev->dvb.frontend = dvb_attach(tda10046_attach,
+ &cinergy_ht_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ dev->dvb.frontend->ops.tuner_ops.init = cinergy_ht_tuner_init;
+ dev->dvb.frontend->ops.tuner_ops.sleep = cinergy_ht_tuner_sleep;
+ dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
+ }
+ break;
default:
printk("%s: Huh? unknown DVB card?\n",dev->name);
break;
switch (client->addr) {
case 0x7a:
case 0x47:
+ case 0x71:
{
struct IR_i2c *ir = i2c_get_clientdata(client);
d1printk("%s i2c IR detected (%s).\n",
return 1;
}
+static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char buf[5], cod4, code3, code4;
+
+ /* poll IR chip */
+ if (5 != i2c_master_recv(&ir->c,buf,5))
+ return -EIO;
+
+ cod4 = buf[4];
+ code4 = (cod4 >> 2);
+ code3 = buf[3];
+ if (code3 == 0)
+ /* no key pressed */
+ return 0;
+
+ /* return key */
+ *ir_key = code4;
+ *ir_raw = code4;
+ return 1;
+}
+
void saa7134_input_irq(struct saa7134_dev *dev)
{
struct saa7134_ir *ir = dev->remote;
mod_timer(&ir->timer, timeout);
}
+static void saa7134_ir_start(struct saa7134_dev *dev, struct saa7134_ir *ir)
+{
+ if (ir->polling) {
+ init_timer(&ir->timer);
+ ir->timer.function = saa7134_input_timer;
+ ir->timer.data = (unsigned long)dev;
+ ir->timer.expires = jiffies + HZ;
+ add_timer(&ir->timer);
+ }
+}
+
+static void saa7134_ir_stop(struct saa7134_dev *dev)
+{
+ if (dev->remote->polling)
+ del_timer_sync(&dev->remote->timer);
+}
+
int saa7134_input_init1(struct saa7134_dev *dev)
{
struct saa7134_ir *ir;
u32 mask_keyup = 0;
int polling = 0;
int ir_type = IR_TYPE_OTHER;
+ int err;
if (dev->has_remote != SAA7134_REMOTE_GPIO)
return -ENODEV;
case SAA7134_BOARD_AVERMEDIA_307:
case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
+ case SAA7134_BOARD_AVERMEDIA_STUDIO_507:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
ir_codes = ir_codes_avermedia;
mask_keycode = 0x0007C8;
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ir || !input_dev) {
- kfree(ir);
- input_free_device(input_dev);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err_out_free;
}
ir->dev = input_dev;
}
input_dev->cdev.dev = &dev->pci->dev;
- /* all done */
dev->remote = ir;
- if (ir->polling) {
- init_timer(&ir->timer);
- ir->timer.function = saa7134_input_timer;
- ir->timer.data = (unsigned long)dev;
- ir->timer.expires = jiffies + HZ;
- add_timer(&ir->timer);
- }
+ saa7134_ir_start(dev, ir);
+
+ err = input_register_device(ir->dev);
+ if (err)
+ goto err_out_stop;
- input_register_device(ir->dev);
return 0;
+
+ err_out_stop:
+ saa7134_ir_stop(dev);
+ dev->remote = NULL;
+ err_out_free:
+ input_free_device(input_dev);
+ kfree(ir);
+ return err;
}
void saa7134_input_fini(struct saa7134_dev *dev)
if (NULL == dev->remote)
return;
- if (dev->remote->polling)
- del_timer_sync(&dev->remote->timer);
+ saa7134_ir_stop(dev);
input_unregister_device(dev->remote->dev);
kfree(dev->remote);
dev->remote = NULL;
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_PCTV_110i:
+ case SAA7134_BOARD_PINNACLE_PCTV_310i:
snprintf(ir->c.name, sizeof(ir->c.name), "Pinnacle PCTV");
if (pinnacle_remote == 0) {
ir->get_key = get_key_pinnacle_color;
ir->get_key = get_key_purpletv;
ir->ir_codes = ir_codes_purpletv;
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
+ snprintf(ir->c.name, sizeof(ir->c.name), "HVR 1110");
+ ir->get_key = get_key_hvr1110;
+ ir->ir_codes = ir_codes_hauppauge_new;
+ break;
default:
dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board);
break;
#define SAA7134_BOARD_PROTEUS_2309 98
#define SAA7134_BOARD_AVERMEDIA_A16AR 99
#define SAA7134_BOARD_ASUS_EUROPA2_HYBRID 100
+#define SAA7134_BOARD_PINNACLE_PCTV_310i 101
+#define SAA7134_BOARD_AVERMEDIA_STUDIO_507 102
+#define SAA7134_BOARD_VIDEOMATE_DVBT_200A 103
+#define SAA7134_BOARD_HAUPPAUGE_HVR1110 104
+#define SAA7134_BOARD_CINERGY_HT_PCMCIA 105
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
struct v4l2_prio_state prio;
#endif
+ /* insmod option/autodetected */
+ int autodetected;
+
/* various device info */
unsigned int resources;
struct video_device *video_dev;
stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL);
if (stv680->sbuf[i].data == NULL) {
PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i);
- return -1;
+ goto nomem_err;
}
}
stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL);
if (stv680->scratch[i].data == NULL) {
PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i);
- return -1;
+ goto nomem_err;
}
stv680->scratch[i].state = BUFFER_UNUSED;
}
for (i = 0; i < STV680_NUMSBUF; i++) {
urb = usb_alloc_urb (0, GFP_KERNEL);
if (!urb)
- return -ENOMEM;
+ goto nomem_err;
/* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */
usb_fill_bulk_urb (urb, stv680->udev,
stv680->framecount = 0;
return 0;
+
+ nomem_err:
+ for (i = 0; i < STV680_NUMSCRATCH; i++) {
+ kfree(stv680->scratch[i].data);
+ stv680->scratch[i].data = NULL;
+ }
+ for (i = 0; i < STV680_NUMSBUF; i++) {
+ usb_kill_urb(stv680->urb[i]);
+ usb_free_urb(stv680->urb[i]);
+ stv680->urb[i] = NULL;
+ kfree(stv680->sbuf[i].data);
+ stv680->sbuf[i].data = NULL;
+ }
+ return -ENOMEM;
+
}
static int stv680_stop_stream (struct usb_stv *stv680)
buf[1] &= ~cQSS;
if (t->tda9887_config & TDA9887_GATING_18)
buf[3] &= ~cGating_36;
+
+ if (t->tda9887_config & TDA9887_GAIN_NORMAL) {
+ radio_stereo.e &= ~cTunerGainLow;
+ radio_mono.e &= ~cTunerGainLow;
+ }
+
return 0;
}
printk("%02x ",buffer[i]);
printk("\n");
}
+ /* HACK: This test were added to avoid tuner to probe tda9840 and tea6415c on the MXB card */
+ if (adap->id == I2C_HW_SAA7146 && addr < 0x4a)
+ return -ENODEV;
+
/* autodetection code based on the i2c addr */
if (!no_autodetect) {
switch (addr) {
case TUNER_PHILIPS_FM1216ME_MK3:
case TUNER_PHILIPS_FM1236_MK3:
case TUNER_PHILIPS_FM1256_IH3:
+ case TUNER_LG_NTSC_TAPE:
stereo = ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
break;
default:
case TUNER_PHILIPS_FM1216ME_MK3:
case TUNER_PHILIPS_FM1236_MK3:
case TUNER_PHILIPS_FMD1216ME_MK3:
+ case TUNER_LG_NTSC_TAPE:
buffer[3] = 0x19;
break;
case TUNER_TNF_5335MF:
config |= TDA9887_INTERCARRIER;
/* if (params->port1_set_for_fm_mono)
config &= ~TDA9887_PORT1_ACTIVE;*/
+ if (params->fm_gain_normal)
+ config |= TDA9887_GAIN_NORMAL;
i2c_clients_command(c->adapter, TDA9887_SET_CONFIG, &config);
}
if (4 != (rc = i2c_master_send(c,buffer,4)))
.has_tda9887 = 1,
.port1_invert_for_secam_lc = 1,
.default_pll_gating_18 = 1,
+ .fm_gain_normal=1,
},
};
},
};
-/* ------------ TUNER_LG_NTSC_TAPE - LGINNOTEK NTSC ------------ */
-
-static struct tuner_params tuner_lg_ntsc_tape_params[] = {
- {
- .type = TUNER_PARAM_TYPE_NTSC,
- .ranges = tuner_fm1236_mk3_ntsc_ranges,
- .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
- },
-};
-
/* ------------ TUNER_TNF_8831BGFF - Philips PAL ------------ */
static struct tuner_range tuner_tnf_8831bgff_pal_ranges[] = {
},
[TUNER_LG_NTSC_TAPE] = { /* LGINNOTEK NTSC */
.name = "LG NTSC (TAPE series)",
- .params = tuner_lg_ntsc_tape_params,
- .count = ARRAY_SIZE(tuner_lg_ntsc_tape_params),
+ .params = tuner_fm1236_mk3_params,
+ .count = ARRAY_SIZE(tuner_fm1236_mk3_params),
},
[TUNER_TNF_8831BGFF] = { /* Philips PAL */
.name = "Tenna TNF 8831 BGFF)",
tvee->has_radio = eeprom_data[i+len-1];
/* old style tag, don't know how to detect
IR presence, mark as unknown. */
- tvee->has_ir = 2;
+ tvee->has_ir = -1;
tvee->model =
eeprom_data[i+8] +
(eeprom_data[i+9] << 8);
STRM(decoderIC, tvee->decoder_processor),
tvee->decoder_processor);
}
- if (tvee->has_ir == 2)
+ if (tvee->has_ir == -1)
tveeprom_info("has %sradio\n",
tvee->has_radio ? "" : "no ");
else
- tveeprom_info("has %sradio, has %sIR remote\n",
+ tveeprom_info("has %sradio, has %sIR receiver, has %sIR transmitter\n",
tvee->has_radio ? "" : "no ",
- tvee->has_ir ? "" : "no ");
+ (tvee->has_ir & 1) ? "" : "no ",
+ (tvee->has_ir & 2) ? "" : "no ");
}
EXPORT_SYMBOL(tveeprom_hauppauge_analog);
static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
{
struct input_dev *input_dev;
+ int error;
usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));
input_dev->private = cam;
- input_register_device(cam->input);
+ error = input_register_device(cam->input);
+ if (error) {
+ warn("Failed to register camera's input device, err: %d\n",
+ error);
+ input_free_device(cam->input);
+ cam->input = NULL;
+ }
}
static void qcm_unregister_input(struct qcm *cam)
}
base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
- cams = (struct usbvideo *) kzalloc(base_size, GFP_KERNEL);
+ cams = kzalloc(base_size, GFP_KERNEL);
if (cams == NULL) {
err("Failed to allocate %d. bytes for usbvideo struct", base_size);
return -ENOMEM;
--- /dev/null
+config VIDEO_USBVISION
+ tristate "USB video devices based on Nogatech NT1003/1004/1005"
+ depends on I2C && VIDEO_V4L2
+ select VIDEO_TUNER
+ select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
+ ---help---
+ There are more than 50 different USB video devices based on
+ NT1003/1004/1005 USB Bridges. This driver enables using those
+ devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbvision.
--- /dev/null
+usbvision-objs := usbvision-core.o usbvision-video.o usbvision-i2c.o usbvision-cards.o
+
+obj-$(CONFIG_VIDEO_USBVISION) += usbvision.o
+
+EXTRA_CFLAGS += -Idrivers/media/video
--- /dev/null
+/*
+ * USBVISION.H
+ * usbvision header file
+ *
+ * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
+ *
+ * This module is part of usbvision driver project.
+ * Updates to driver completed by Dwaine P. Garden
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/list.h>
+#include <linux/i2c.h>
+#include <media/v4l2-dev.h>
+#include <media/tuner.h>
+#include "usbvision.h"
+
+/* Supported Devices: A table for usbvision.c*/
+struct usbvision_device_data_st usbvision_device_data[] = {
+ {0xFFF0, 0xFFF0, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Custom Dummy USBVision Device"},
+ {0x0A6F, 0x0400, -1, CODEC_SAA7113, 4, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, -1, -1, -1, "Xanboo"},
+ {0x050D, 0x0208, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 1, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Belkin USBView II"},
+ {0x0571, 0x0002, 0, CODEC_SAA7111, 2, V4L2_STD_PAL, 0, 0, 1, 0, 0, -1, -1, -1, -1, 7, "echoFX InterView Lite"},
+ {0x0573, 0x0003, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, -1, -1, -1, "USBGear USBG-V1 resp. HAMA USB"},
+ {0x0573, 0x0400, -1, CODEC_SAA7113, 4, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "D-Link V100"},
+ {0x0573, 0x2000, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, -1, -1, -1, "X10 USB Camera"},
+ {0x0573, 0x2d00, -1, CODEC_SAA7111, 2, V4L2_STD_PAL, 1, 0, 1, 0, 0, -1, -1, -1, 3, 7, "Osprey 50"},
+ {0x0573, 0x2d01, -1, CODEC_SAA7113, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Hauppauge USB-Live Model 600"},
+ {0x0573, 0x2101, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 2, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Zoran Co. PMD (Nogatech) AV-grabber Manhattan"},
+ {0x0573, 0x4100, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, 20, -1, "Nogatech USB-TV (NTSC) FM"},
+ {0x0573, 0x4110, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, 20, -1, "PNY USB-TV (NTSC) FM"},
+ {0x0573, 0x4450, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "PixelView PlayTv-USB PRO (PAL) FM"},
+ {0x0573, 0x4550, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "ZTV ZT-721 2.4GHz USB A/V Receiver"},
+ {0x0573, 0x4d00, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, 20, -1, "Hauppauge WinTv-USB USA"},
+ {0x0573, 0x4d01, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB"},
+ {0x0573, 0x4d02, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (NTSC)"},
+ {0x0573, 0x4d03, -1, CODEC_SAA7111, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (SECAM) "},
+ {0x0573, 0x4d10, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (NTSC) FM"},
+ {0x0573, 0x4d11, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (PAL) FM"},
+ {0x0573, 0x4d12, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB (PAL) FM"},
+ {0x0573, 0x4d2a, 0, CODEC_SAA7113, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_MICROTUNE_4049FM5, -1, -1, 0, 3, 7, "Hauppauge WinTv USB (NTSC) FM Model 602 40201 Rev B285"},
+ {0x0573, 0x4d2b, 0, CODEC_SAA7113, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_MICROTUNE_4049FM5, -1, -1, 0, 3, 7, "Hauppauge WinTv USB (NTSC) FM Model 602 40201 Rev B282"},
+ {0x0573, 0x4d2c, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_FM1216ME_MK3, -1, -1, 0, 3, 7, "Hauppauge WinTv USB (PAL/SECAM) 40209 Rev E1A5"},
+ {0x0573, 0x4d20, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB II (PAL) FM Model 40201 Rev B226"},
+ {0x0573, 0x4d21, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB II (PAL)"},
+ {0x0573, 0x4d22, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB II (PAL) MODEL 566"},
+ {0x0573, 0x4d23, -1, CODEC_SAA7113, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB (SECAM) 4D23"},
+ {0x0573, 0x4d25, -1, CODEC_SAA7113, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB (SECAM) Model 40209 Rev B234"},
+ {0x0573, 0x4d26, -1, CODEC_SAA7113, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB (SECAM) Model 40209 Rev B243"},
+ {0x0573, 0x4d27, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_ALPS_TSBE1_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB Model 40204 Rev B281"},
+ {0x0573, 0x4d28, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_ALPS_TSBE1_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB Model 40204 Rev B283"},
+ {0x0573, 0x4d29, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB Model 40205 Rev B298"},
+ {0x0573, 0x4d30, -1, CODEC_SAA7113, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB FM Model 40211 Rev B123"},
+ {0x0573, 0x4d31, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB III (PAL) FM Model 568"},
+ {0x0573, 0x4d32, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB III (PAL) FM Model 573"},
+ {0x0573, 0x4d35, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_MICROTUNE_4049FM5, -1, -1, 0, 3, 7, "Hauppauge WinTv-USB III (PAL) FM Model 40219 Rev B252"},
+ {0x0573, 0x4d37, 0, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_FM1216ME_MK3, -1, -1, 0, 3, 7, "Hauppauge WinTV USB device Model 40219 Rev E189"},
+ {0x0768, 0x0006, -1, CODEC_SAA7113, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, 5, 5, -1, "Camtel Technology USB TV Genie Pro FM Model TVB330"},
+ {0x07d0, 0x0001, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Digital Video Creator I"},
+ {0x07d0, 0x0002, -1, CODEC_SAA7111, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 82, 20, 7, "Global Village GV-007 (NTSC)"},
+ {0x07d0, 0x0003, 0, CODEC_SAA7113, 2, V4L2_STD_NTSC, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-50 Rev 1 (NTSC)"},
+ {0x07d0, 0x0004, 0, CODEC_SAA7113, 2, V4L2_STD_PAL, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-80 Rev 1 (PAL)"},
+ {0x07d0, 0x0005, 0, CODEC_SAA7113, 2, V4L2_STD_SECAM, 0, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)"},
+ {0x2304, 0x010d, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 0, 0, 1, TUNER_TEMIC_4066FY5_PAL_I, -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (PAL)"},
+ {0x2304, 0x0109, -1, CODEC_SAA7111, 3, V4L2_STD_SECAM, 1, 0, 1, 1, TUNER_PHILIPS_SECAM, -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (SECAM)"},
+ {0x2304, 0x0110, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_PHILIPS_PAL, -1, -1,128, 23, -1, "Pinnacle Studio PCTV USB (PAL) FM"},
+ {0x2304, 0x0111, -1, CODEC_SAA7111, 3, V4L2_STD_PAL, 1, 0, 1, 1, TUNER_PHILIPS_PAL, -1, -1, -1, -1, -1, "Miro PCTV USB"},
+ {0x2304, 0x0112, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Pinnacle Studio PCTV USB (NTSC) FM"},
+ {0x2304, 0x0210, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL, -1, -1, 0, 3, 7, "Pinnacle Studio PCTV USB (PAL) FM"},
+ {0x2304, 0x0212, -1, CODEC_SAA7111, 3, V4L2_STD_NTSC, 1, 1, 1, 1, TUNER_TEMIC_4039FR5_NTSC, -1, -1, 0, 3, 7, "Pinnacle Studio PCTV USB (NTSC) FM"},
+ {0x2304, 0x0214, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL, -1, -1, 0, 3, 7, "Pinnacle Studio PCTV USB (PAL) FM"},
+ {0x2304, 0x0300, -1, CODEC_SAA7113, 2, V4L2_STD_NTSC, 1, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Pinnacle Studio Linx Video input cable (NTSC)"},
+ {0x2304, 0x0301, -1, CODEC_SAA7113, 2, V4L2_STD_PAL, 1, 0, 1, 0, 0, -1, -1, 0, 3, 7, "Pinnacle Studio Linx Video input cable (PAL)"},
+ {0x2304, 0x0419, -1, CODEC_SAA7113, 3, V4L2_STD_PAL, 1, 1, 1, 1, TUNER_TEMIC_4009FR5_PAL, -1, -1, 0, 3, 7, "Pinnacle PCTV Bungee USB (PAL) FM"},
+ {0x2400, 0x4200, -1, CODEC_SAA7111, 3, VIDEO_MODE_NTSC, 1, 0, 1, 1, TUNER_PHILIPS_NTSC_M, -1, -1, -1, -1, -1, "Hauppauge WinTv-USB"},
+ {} /* Terminating entry */
+};
+
+/* Supported Devices */
+
+struct usb_device_id usbvision_table [] = {
+ { USB_DEVICE(0xFFF0, 0xFFF0) }, /* Custom Dummy USBVision Device */
+ { USB_DEVICE(0x0A6F, 0x0400) }, /* Xanboo */
+ { USB_DEVICE(0x050d, 0x0208) }, /* Belkin USBView II */
+ { USB_DEVICE(0x0571, 0x0002) }, /* echoFX InterView Lite */
+ { USB_DEVICE(0x0573, 0x0003) }, /* USBGear USBG-V1 */
+ { USB_DEVICE(0x0573, 0x0400) }, /* D-Link V100 */
+ { USB_DEVICE(0x0573, 0x2000) }, /* X10 USB Camera */
+ { USB_DEVICE(0x0573, 0x2d00) }, /* Osprey 50 */
+ { USB_DEVICE(0x0573, 0x2d01) }, /* Hauppauge USB-Live Model 600 */
+ { USB_DEVICE(0x0573, 0x2101) }, /* Zoran Co. PMD (Nogatech) AV-grabber Manhattan */
+ { USB_DEVICE(0x0573, 0x4100) }, /* Nogatech USB-TV FM (NTSC) */
+ { USB_DEVICE(0x0573, 0x4110) }, /* PNY USB-TV (NTSC) FM */
+ { USB_DEVICE(0x0573, 0x4450) }, /* PixelView PlayTv-USB PRO (PAL) FM */
+ { USB_DEVICE(0x0573, 0x4550) }, /* ZTV ZT-721 2.4GHz USB A/V Receiver */
+ { USB_DEVICE(0x0573, 0x4d00) }, /* Hauppauge WinTv-USB USA */
+ { USB_DEVICE(0x0573, 0x4d01) }, /* Hauppauge WinTv-USB */
+ { USB_DEVICE(0x0573, 0x4d02) }, /* Hauppauge WinTv-USB UK */
+ { USB_DEVICE(0x0573, 0x4d03) }, /* Hauppauge WinTv-USB France */
+ { USB_DEVICE(0x0573, 0x4d10) }, /* Hauppauge WinTv-USB with FM USA radio */
+ { USB_DEVICE(0x0573, 0x4d11) }, /* Hauppauge WinTv-USB (PAL) with FM radio */
+ { USB_DEVICE(0x0573, 0x4d12) }, /* Hauppauge WinTv-USB UK with FM Radio */
+ { USB_DEVICE(0x0573, 0x4d2a) }, /* Hauppague WinTv USB Model 602 40201 Rev B285 */
+ { USB_DEVICE(0x0573, 0x4d2b) }, /* Hauppague WinTv USB Model 602 40201 Rev B282 */
+ { USB_DEVICE(0x0573, 0x4d2c) }, /* Hauppague WinTv USB Model 40209 Rev. E1A5 PAL*/
+ { USB_DEVICE(0x0573, 0x4d20) }, /* Hauppauge WinTv-USB II (PAL) FM Model 40201 Rev B226 */
+ { USB_DEVICE(0x0573, 0x4d21) }, /* Hauppauge WinTv-USB II (PAL) with FM radio*/
+ { USB_DEVICE(0x0573, 0x4d22) }, /* Hauppauge WinTv-USB II (PAL) Model 566 */
+ { USB_DEVICE(0x0573, 0x4d23) }, /* Hauppauge WinTv-USB France 4D23*/
+ { USB_DEVICE(0x0573, 0x4d25) }, /* Hauppauge WinTv-USB Model 40209 rev B234 */
+ { USB_DEVICE(0x0573, 0x4d26) }, /* Hauppauge WinTv-USB Model 40209 Rev B243 */
+ { USB_DEVICE(0x0573, 0x4d27) }, /* Hauppauge WinTv-USB Model 40204 Rev B281 */
+ { USB_DEVICE(0x0573, 0x4d28) }, /* Hauppauge WinTv-USB Model 40204 Rev B283 */
+ { USB_DEVICE(0x0573, 0x4d29) }, /* Hauppauge WinTv-USB Model 40205 Rev B298 */
+ { USB_DEVICE(0x0573, 0x4d30) }, /* Hauppauge WinTv-USB FM Model 40211 Rev B123 */
+ { USB_DEVICE(0x0573, 0x4d31) }, /* Hauppauge WinTv-USB III (PAL) with FM radio Model 568 */
+ { USB_DEVICE(0x0573, 0x4d32) }, /* Hauppauge WinTv-USB III (PAL) FM Model 573 */
+ { USB_DEVICE(0x0573, 0x4d35) }, /* Hauppauge WinTv-USB III (SECAM) FM Model 40219 Rev B252 */
+ { USB_DEVICE(0x0573, 0x4d37) }, /* Hauppauge WinTv-USB Model 40219 Rev E189 */
+ { USB_DEVICE(0x0768, 0x0006) }, /* Camtel Technology USB TV Genie Pro FM Model TVB330 */
+ { USB_DEVICE(0x07d0, 0x0001) }, /* Digital Video Creator I */
+ { USB_DEVICE(0x07d0, 0x0002) }, /* Global Village GV-007 (NTSC) */
+ { USB_DEVICE(0x07d0, 0x0003) }, /* Dazzle Fusion Model DVC-50 Rev 1 (NTSC) */
+ { USB_DEVICE(0x07d0, 0x0004) }, /* Dazzle Fusion Model DVC-80 Rev 1 (PAL) */
+ { USB_DEVICE(0x07d0, 0x0005) }, /* Dazzle Fusion Model DVC-90 Rev 1 (SECAM) */
+ { USB_DEVICE(0x2304, 0x010d) }, /* Pinnacle Studio PCTV USB (PAL) */
+ { USB_DEVICE(0x2304, 0x0109) }, /* Pinnacle Studio PCTV USB (SECAM) */
+ { USB_DEVICE(0x2304, 0x0110) }, /* Pinnacle Studio PCTV USB (PAL) */
+ { USB_DEVICE(0x2304, 0x0111) }, /* Miro PCTV USB */
+ { USB_DEVICE(0x2304, 0x0112) }, /* Pinnacle Studio PCTV USB (NTSC) with FM radio */
+ { USB_DEVICE(0x2304, 0x0210) }, /* Pinnacle Studio PCTV USB (PAL) with FM radio */
+ { USB_DEVICE(0x2304, 0x0212) }, /* Pinnacle Studio PCTV USB (NTSC) with FM radio */
+ { USB_DEVICE(0x2304, 0x0214) }, /* Pinnacle Studio PCTV USB (PAL) with FM radio */
+ { USB_DEVICE(0x2304, 0x0300) }, /* Pinnacle Studio Linx Video input cable (NTSC) */
+ { USB_DEVICE(0x2304, 0x0301) }, /* Pinnacle Studio Linx Video input cable (PAL) */
+ { USB_DEVICE(0x2304, 0x0419) }, /* Pinnacle PCTV Bungee USB (PAL) FM */
+
+ { USB_DEVICE(0x2400, 0x4200) }, /* Hauppauge WinTv-USB2 Model 42012 */
+
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, usbvision_table);
--- /dev/null
+/*
+ * usbvision-core.c - driver for NT100x USB video capture devices
+ *
+ *
+ * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
+ * Dwaine Garden <dwainegarden@rogers.com>
+ *
+ * This module is part of usbvision driver project.
+ * Updates to driver completed by Dwaine P. Garden
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/utsname.h>
+#include <linux/highmem.h>
+#include <linux/smp_lock.h>
+#include <linux/videodev.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/videodev2.h>
+#include <linux/video_decoder.h>
+#include <linux/i2c.h>
+
+#include <media/saa7115.h>
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include <media/audiochip.h>
+
+#include <linux/moduleparam.h>
+#include <linux/workqueue.h>
+
+#ifdef CONFIG_KMOD
+#include <linux/kmod.h>
+#endif
+
+#include "usbvision.h"
+
+static unsigned int core_debug = 0;
+module_param(core_debug,int,0644);
+MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
+
+static unsigned int force_testpattern = 0;
+module_param(force_testpattern,int,0644);
+MODULE_PARM_DESC(force_testpattern,"enable test pattern display [core]");
+
+static int adjustCompression = 1; // Set the compression to be adaptive
+module_param(adjustCompression, int, 0444);
+MODULE_PARM_DESC(adjustCompression, " Set the ADPCM compression for the device. Default: 1 (On)");
+
+static int SwitchSVideoInput = 0; // To help people with Black and White output with using s-video input. Some cables and input device are wired differently.
+module_param(SwitchSVideoInput, int, 0444);
+MODULE_PARM_DESC(SwitchSVideoInput, " Set the S-Video input. Some cables and input device are wired differently. Default: 0 (Off)");
+
+#define ENABLE_HEXDUMP 0 /* Enable if you need it */
+
+
+#ifdef USBVISION_DEBUG
+ #define PDEBUG(level, fmt, args...) \
+ if (core_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args)
+#else
+ #define PDEBUG(level, fmt, args...) do {} while(0)
+#endif
+
+#define DBG_HEADER 1<<0
+#define DBG_IRQ 1<<1
+#define DBG_ISOC 1<<2
+#define DBG_PARSE 1<<3
+#define DBG_SCRATCH 1<<4
+#define DBG_FUNC 1<<5
+
+static const int max_imgwidth = MAX_FRAME_WIDTH;
+static const int max_imgheight = MAX_FRAME_HEIGHT;
+static const int min_imgwidth = MIN_FRAME_WIDTH;
+static const int min_imgheight = MIN_FRAME_HEIGHT;
+
+/* The value of 'scratch_buf_size' affects quality of the picture
+ * in many ways. Shorter buffers may cause loss of data when client
+ * is too slow. Larger buffers are memory-consuming and take longer
+ * to work with. This setting can be adjusted, but the default value
+ * should be OK for most desktop users.
+ */
+#define DEFAULT_SCRATCH_BUF_SIZE (0x20000) // 128kB memory scratch buffer
+static const int scratch_buf_size = DEFAULT_SCRATCH_BUF_SIZE;
+
+// Function prototypes
+static int usbvision_request_intra (struct usb_usbvision *usbvision);
+static int usbvision_unrequest_intra (struct usb_usbvision *usbvision);
+static int usbvision_adjust_compression (struct usb_usbvision *usbvision);
+static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision);
+
+/*******************************/
+/* Memory management functions */
+/*******************************/
+
+/*
+ * Here we want the physical address of the memory.
+ * This is used when initializing the contents of the area.
+ */
+
+void *usbvision_rvmalloc(unsigned long size)
+{
+ void *mem;
+ unsigned long adr;
+
+ size = PAGE_ALIGN(size);
+ mem = vmalloc_32(size);
+ if (!mem)
+ return NULL;
+
+ memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+ adr = (unsigned long) mem;
+ while (size > 0) {
+ SetPageReserved(vmalloc_to_page((void *)adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ return mem;
+}
+
+void usbvision_rvfree(void *mem, unsigned long size)
+{
+ unsigned long adr;
+
+ if (!mem)
+ return;
+
+ size = PAGE_ALIGN(size);
+
+ adr = (unsigned long) mem;
+ while ((long) size > 0) {
+ ClearPageReserved(vmalloc_to_page((void *)adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ vfree(mem);
+}
+
+
+
+#if ENABLE_HEXDUMP
+static void usbvision_hexdump(const unsigned char *data, int len)
+{
+ char tmp[80];
+ int i, k;
+
+ for (i = k = 0; len > 0; i++, len--) {
+ if (i > 0 && (i % 16 == 0)) {
+ printk("%s\n", tmp);
+ k = 0;
+ }
+ k += sprintf(&tmp[k], "%02x ", data[i]);
+ }
+ if (k > 0)
+ printk("%s\n", tmp);
+}
+#endif
+
+/********************************
+ * scratch ring buffer handling
+ ********************************/
+int scratch_len(struct usb_usbvision *usbvision) /*This returns the amount of data actually in the buffer */
+{
+ int len = usbvision->scratch_write_ptr - usbvision->scratch_read_ptr;
+ if (len < 0) {
+ len += scratch_buf_size;
+ }
+ PDEBUG(DBG_SCRATCH, "scratch_len() = %d\n", len);
+
+ return len;
+}
+
+
+/* This returns the free space left in the buffer */
+int scratch_free(struct usb_usbvision *usbvision)
+{
+ int free = usbvision->scratch_read_ptr - usbvision->scratch_write_ptr;
+ if (free <= 0) {
+ free += scratch_buf_size;
+ }
+ if (free) {
+ free -= 1; /* at least one byte in the buffer must */
+ /* left blank, otherwise there is no chance to differ between full and empty */
+ }
+ PDEBUG(DBG_SCRATCH, "return %d\n", free);
+
+ return free;
+}
+
+
+/* This puts data into the buffer */
+int scratch_put(struct usb_usbvision *usbvision, unsigned char *data, int len)
+{
+ int len_part;
+
+ if (usbvision->scratch_write_ptr + len < scratch_buf_size) {
+ memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len);
+ usbvision->scratch_write_ptr += len;
+ }
+ else {
+ len_part = scratch_buf_size - usbvision->scratch_write_ptr;
+ memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len_part);
+ if (len == len_part) {
+ usbvision->scratch_write_ptr = 0; /* just set write_ptr to zero */
+ }
+ else {
+ memcpy(usbvision->scratch, data + len_part, len - len_part);
+ usbvision->scratch_write_ptr = len - len_part;
+ }
+ }
+
+ PDEBUG(DBG_SCRATCH, "len=%d, new write_ptr=%d\n", len, usbvision->scratch_write_ptr);
+
+ return len;
+}
+
+/* This marks the write_ptr as position of new frame header */
+void scratch_mark_header(struct usb_usbvision *usbvision)
+{
+ PDEBUG(DBG_SCRATCH, "header at write_ptr=%d\n", usbvision->scratch_headermarker_write_ptr);
+
+ usbvision->scratch_headermarker[usbvision->scratch_headermarker_write_ptr] =
+ usbvision->scratch_write_ptr;
+ usbvision->scratch_headermarker_write_ptr += 1;
+ usbvision->scratch_headermarker_write_ptr %= USBVISION_NUM_HEADERMARKER;
+}
+
+/* This gets data from the buffer at the given "ptr" position */
+int scratch_get_extra(struct usb_usbvision *usbvision, unsigned char *data, int *ptr, int len)
+{
+ int len_part;
+ if (*ptr + len < scratch_buf_size) {
+ memcpy(data, usbvision->scratch + *ptr, len);
+ *ptr += len;
+ }
+ else {
+ len_part = scratch_buf_size - *ptr;
+ memcpy(data, usbvision->scratch + *ptr, len_part);
+ if (len == len_part) {
+ *ptr = 0; /* just set the y_ptr to zero */
+ }
+ else {
+ memcpy(data + len_part, usbvision->scratch, len - len_part);
+ *ptr = len - len_part;
+ }
+ }
+
+ PDEBUG(DBG_SCRATCH, "len=%d, new ptr=%d\n", len, *ptr);
+
+ return len;
+}
+
+
+/* This sets the scratch extra read pointer */
+void scratch_set_extra_ptr(struct usb_usbvision *usbvision, int *ptr, int len)
+{
+ *ptr = (usbvision->scratch_read_ptr + len)%scratch_buf_size;
+
+ PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr);
+}
+
+
+/*This increments the scratch extra read pointer */
+void scratch_inc_extra_ptr(int *ptr, int len)
+{
+ *ptr = (*ptr + len) % scratch_buf_size;
+
+ PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr);
+}
+
+
+/* This gets data from the buffer */
+int scratch_get(struct usb_usbvision *usbvision, unsigned char *data, int len)
+{
+ int len_part;
+ if (usbvision->scratch_read_ptr + len < scratch_buf_size) {
+ memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len);
+ usbvision->scratch_read_ptr += len;
+ }
+ else {
+ len_part = scratch_buf_size - usbvision->scratch_read_ptr;
+ memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len_part);
+ if (len == len_part) {
+ usbvision->scratch_read_ptr = 0; /* just set the read_ptr to zero */
+ }
+ else {
+ memcpy(data + len_part, usbvision->scratch, len - len_part);
+ usbvision->scratch_read_ptr = len - len_part;
+ }
+ }
+
+ PDEBUG(DBG_SCRATCH, "len=%d, new read_ptr=%d\n", len, usbvision->scratch_read_ptr);
+
+ return len;
+}
+
+
+/* This sets read pointer to next header and returns it */
+int scratch_get_header(struct usb_usbvision *usbvision,struct usbvision_frame_header *header)
+{
+ int errCode = 0;
+
+ PDEBUG(DBG_SCRATCH, "from read_ptr=%d", usbvision->scratch_headermarker_read_ptr);
+
+ while (usbvision->scratch_headermarker_write_ptr -
+ usbvision->scratch_headermarker_read_ptr != 0) {
+ usbvision->scratch_read_ptr =
+ usbvision->scratch_headermarker[usbvision->scratch_headermarker_read_ptr];
+ usbvision->scratch_headermarker_read_ptr += 1;
+ usbvision->scratch_headermarker_read_ptr %= USBVISION_NUM_HEADERMARKER;
+ scratch_get(usbvision, (unsigned char *)header, USBVISION_HEADER_LENGTH);
+ if ((header->magic_1 == USBVISION_MAGIC_1)
+ && (header->magic_2 == USBVISION_MAGIC_2)
+ && (header->headerLength == USBVISION_HEADER_LENGTH)) {
+ errCode = USBVISION_HEADER_LENGTH;
+ header->frameWidth = header->frameWidthLo + (header->frameWidthHi << 8);
+ header->frameHeight = header->frameHeightLo + (header->frameHeightHi << 8);
+ break;
+ }
+ }
+
+ return errCode;
+}
+
+
+/*This removes len bytes of old data from the buffer */
+void scratch_rm_old(struct usb_usbvision *usbvision, int len)
+{
+
+ usbvision->scratch_read_ptr += len;
+ usbvision->scratch_read_ptr %= scratch_buf_size;
+ PDEBUG(DBG_SCRATCH, "read_ptr is now %d\n", usbvision->scratch_read_ptr);
+}
+
+
+/*This resets the buffer - kills all data in it too */
+void scratch_reset(struct usb_usbvision *usbvision)
+{
+ PDEBUG(DBG_SCRATCH, "\n");
+
+ usbvision->scratch_read_ptr = 0;
+ usbvision->scratch_write_ptr = 0;
+ usbvision->scratch_headermarker_read_ptr = 0;
+ usbvision->scratch_headermarker_write_ptr = 0;
+ usbvision->isocstate = IsocState_NoFrame;
+}
+
+int usbvision_scratch_alloc(struct usb_usbvision *usbvision)
+{
+ usbvision->scratch = vmalloc(scratch_buf_size);
+ scratch_reset(usbvision);
+ if(usbvision->scratch == NULL) {
+ err("%s: unable to allocate %d bytes for scratch",
+ __FUNCTION__, scratch_buf_size);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+void usbvision_scratch_free(struct usb_usbvision *usbvision)
+{
+ if (usbvision->scratch != NULL) {
+ vfree(usbvision->scratch);
+ usbvision->scratch = NULL;
+ }
+}
+
+/*
+ * usbvision_testpattern()
+ *
+ * Procedure forms a test pattern (yellow grid on blue background).
+ *
+ * Parameters:
+ * fullframe: if TRUE then entire frame is filled, otherwise the procedure
+ * continues from the current scanline.
+ * pmode 0: fill the frame with solid blue color (like on VCR or TV)
+ * 1: Draw a colored grid
+ *
+ */
+void usbvision_testpattern(struct usb_usbvision *usbvision, int fullframe,
+ int pmode)
+{
+ static const char proc[] = "usbvision_testpattern";
+ struct usbvision_frame *frame;
+ unsigned char *f;
+ int num_cell = 0;
+ int scan_length = 0;
+ static int num_pass = 0;
+
+ if (usbvision == NULL) {
+ printk(KERN_ERR "%s: usbvision == NULL\n", proc);
+ return;
+ }
+ if (usbvision->curFrame == NULL) {
+ printk(KERN_ERR "%s: usbvision->curFrame is NULL.\n", proc);
+ return;
+ }
+
+ /* Grab the current frame */
+ frame = usbvision->curFrame;
+
+ /* Optionally start at the beginning */
+ if (fullframe) {
+ frame->curline = 0;
+ frame->scanlength = 0;
+ }
+
+ /* Form every scan line */
+ for (; frame->curline < frame->frmheight; frame->curline++) {
+ int i;
+
+ f = frame->data + (usbvision->curwidth * 3 * frame->curline);
+ for (i = 0; i < usbvision->curwidth; i++) {
+ unsigned char cb = 0x80;
+ unsigned char cg = 0;
+ unsigned char cr = 0;
+
+ if (pmode == 1) {
+ if (frame->curline % 32 == 0)
+ cb = 0, cg = cr = 0xFF;
+ else if (i % 32 == 0) {
+ if (frame->curline % 32 == 1)
+ num_cell++;
+ cb = 0, cg = cr = 0xFF;
+ } else {
+ cb =
+ ((num_cell * 7) +
+ num_pass) & 0xFF;
+ cg =
+ ((num_cell * 5) +
+ num_pass * 2) & 0xFF;
+ cr =
+ ((num_cell * 3) +
+ num_pass * 3) & 0xFF;
+ }
+ } else {
+ /* Just the blue screen */
+ }
+
+ *f++ = cb;
+ *f++ = cg;
+ *f++ = cr;
+ scan_length += 3;
+ }
+ }
+
+ frame->grabstate = FrameState_Done;
+ frame->scanlength += scan_length;
+ ++num_pass;
+
+}
+
+/*
+ * usbvision_decompress_alloc()
+ *
+ * allocates intermediate buffer for decompression
+ */
+int usbvision_decompress_alloc(struct usb_usbvision *usbvision)
+{
+ int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2;
+ usbvision->IntraFrameBuffer = vmalloc(IFB_size);
+ if (usbvision->IntraFrameBuffer == NULL) {
+ err("%s: unable to allocate %d for compr. frame buffer", __FUNCTION__, IFB_size);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/*
+ * usbvision_decompress_free()
+ *
+ * frees intermediate buffer for decompression
+ */
+void usbvision_decompress_free(struct usb_usbvision *usbvision)
+{
+ if (usbvision->IntraFrameBuffer != NULL) {
+ vfree(usbvision->IntraFrameBuffer);
+ usbvision->IntraFrameBuffer = NULL;
+ }
+}
+
+/************************************************************
+ * Here comes the data parsing stuff that is run as interrupt
+ ************************************************************/
+/*
+ * usbvision_find_header()
+ *
+ * Locate one of supported header markers in the scratch buffer.
+ */
+static enum ParseState usbvision_find_header(struct usb_usbvision *usbvision)
+{
+ struct usbvision_frame *frame;
+ int foundHeader = 0;
+
+ frame = usbvision->curFrame;
+
+ while (scratch_get_header(usbvision, &frame->isocHeader) == USBVISION_HEADER_LENGTH) {
+ // found header in scratch
+ PDEBUG(DBG_HEADER, "found header: 0x%02x%02x %d %d %d %d %#x 0x%02x %u %u",
+ frame->isocHeader.magic_2,
+ frame->isocHeader.magic_1,
+ frame->isocHeader.headerLength,
+ frame->isocHeader.frameNum,
+ frame->isocHeader.framePhase,
+ frame->isocHeader.frameLatency,
+ frame->isocHeader.dataFormat,
+ frame->isocHeader.formatParam,
+ frame->isocHeader.frameWidth,
+ frame->isocHeader.frameHeight);
+
+ if (usbvision->requestIntra) {
+ if (frame->isocHeader.formatParam & 0x80) {
+ foundHeader = 1;
+ usbvision->lastIsocFrameNum = -1; // do not check for lost frames this time
+ usbvision_unrequest_intra(usbvision);
+ break;
+ }
+ }
+ else {
+ foundHeader = 1;
+ break;
+ }
+ }
+
+ if (foundHeader) {
+ frame->frmwidth = frame->isocHeader.frameWidth * usbvision->stretch_width;
+ frame->frmheight = frame->isocHeader.frameHeight * usbvision->stretch_height;
+ frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth)>> 3;
+ }
+ else { // no header found
+ PDEBUG(DBG_HEADER, "skipping scratch data, no header");
+ scratch_reset(usbvision);
+ return ParseState_EndParse;
+ }
+
+ // found header
+ if (frame->isocHeader.dataFormat==ISOC_MODE_COMPRESS) {
+ //check isocHeader.frameNum for lost frames
+ if (usbvision->lastIsocFrameNum >= 0) {
+ if (((usbvision->lastIsocFrameNum + 1) % 32) != frame->isocHeader.frameNum) {
+ // unexpected frame drop: need to request new intra frame
+ PDEBUG(DBG_HEADER, "Lost frame before %d on USB", frame->isocHeader.frameNum);
+ usbvision_request_intra(usbvision);
+ return ParseState_NextFrame;
+ }
+ }
+ usbvision->lastIsocFrameNum = frame->isocHeader.frameNum;
+ }
+ usbvision->header_count++;
+ frame->scanstate = ScanState_Lines;
+ frame->curline = 0;
+
+ if (force_testpattern) {
+ usbvision_testpattern(usbvision, 1, 1);
+ return ParseState_NextFrame;
+ }
+ return ParseState_Continue;
+}
+
+static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision,
+ long *pcopylen)
+{
+ volatile struct usbvision_frame *frame;
+ unsigned char *f;
+ int len;
+ int i;
+ unsigned char yuyv[4]={180, 128, 10, 128}; // YUV components
+ unsigned char rv, gv, bv; // RGB components
+ int clipmask_index, bytes_per_pixel;
+ int stretch_bytes, clipmask_add;
+
+ frame = usbvision->curFrame;
+ f = frame->data + (frame->v4l2_linesize * frame->curline);
+
+ /* Make sure there's enough data for the entire line */
+ len = (frame->isocHeader.frameWidth * 2)+5;
+ if (scratch_len(usbvision) < len) {
+ PDEBUG(DBG_PARSE, "out of data in line %d, need %u.\n", frame->curline, len);
+ return ParseState_Out;
+ }
+
+ if ((frame->curline + 1) >= frame->frmheight) {
+ return ParseState_NextFrame;
+ }
+
+ bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
+ stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel;
+ clipmask_index = frame->curline * MAX_FRAME_WIDTH;
+ clipmask_add = usbvision->stretch_width;
+
+ for (i = 0; i < frame->frmwidth; i+=(2 * usbvision->stretch_width)) {
+
+ scratch_get(usbvision, &yuyv[0], 4);
+
+ if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+ *f++ = yuyv[0]; // Y
+ *f++ = yuyv[3]; // U
+ }
+ else {
+
+ YUV_TO_RGB_BY_THE_BOOK(yuyv[0], yuyv[1], yuyv[3], rv, gv, bv);
+ switch (frame->v4l2_format.format) {
+ case V4L2_PIX_FMT_RGB565:
+ *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 3));
+ *f++ = (0x07 & (gv >> 5)) | (0xF8 & rv);
+ break;
+ case V4L2_PIX_FMT_RGB24:
+ *f++ = bv;
+ *f++ = gv;
+ *f++ = rv;
+ break;
+ case V4L2_PIX_FMT_RGB32:
+ *f++ = bv;
+ *f++ = gv;
+ *f++ = rv;
+ f++;
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 2));
+ *f++ = (0x03 & (gv >> 6)) | (0x7C & (rv >> 1));
+ break;
+ }
+ }
+ clipmask_index += clipmask_add;
+ f += stretch_bytes;
+
+ if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+ *f++ = yuyv[2]; // Y
+ *f++ = yuyv[1]; // V
+ }
+ else {
+
+ YUV_TO_RGB_BY_THE_BOOK(yuyv[2], yuyv[1], yuyv[3], rv, gv, bv);
+ switch (frame->v4l2_format.format) {
+ case V4L2_PIX_FMT_RGB565:
+ *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 3));
+ *f++ = (0x07 & (gv >> 5)) | (0xF8 & rv);
+ break;
+ case V4L2_PIX_FMT_RGB24:
+ *f++ = bv;
+ *f++ = gv;
+ *f++ = rv;
+ break;
+ case V4L2_PIX_FMT_RGB32:
+ *f++ = bv;
+ *f++ = gv;
+ *f++ = rv;
+ f++;
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 2));
+ *f++ = (0x03 & (gv >> 6)) | (0x7C & (rv >> 1));
+ break;
+ }
+ }
+ clipmask_index += clipmask_add;
+ f += stretch_bytes;
+ }
+
+ frame->curline += usbvision->stretch_height;
+ *pcopylen += frame->v4l2_linesize * usbvision->stretch_height;
+
+ if (frame->curline >= frame->frmheight) {
+ return ParseState_NextFrame;
+ }
+ else {
+ return ParseState_Continue;
+ }
+}
+
+/* The decompression routine */
+static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *Compressed,
+ unsigned char *Decompressed, int *StartPos,
+ int *BlockTypeStartPos, int Len)
+{
+ int RestPixel, Idx, MaxPos, Pos, ExtraPos, BlockLen, BlockTypePos, BlockTypeLen;
+ unsigned char BlockByte, BlockCode, BlockType, BlockTypeByte, Integrator;
+
+ Integrator = 0;
+ Pos = *StartPos;
+ BlockTypePos = *BlockTypeStartPos;
+ MaxPos = 396; //Pos + Len;
+ ExtraPos = Pos;
+ BlockLen = 0;
+ BlockByte = 0;
+ BlockCode = 0;
+ BlockType = 0;
+ BlockTypeByte = 0;
+ BlockTypeLen = 0;
+ RestPixel = Len;
+
+ for (Idx = 0; Idx < Len; Idx++) {
+
+ if (BlockLen == 0) {
+ if (BlockTypeLen==0) {
+ BlockTypeByte = Compressed[BlockTypePos];
+ BlockTypePos++;
+ BlockTypeLen = 4;
+ }
+ BlockType = (BlockTypeByte & 0xC0) >> 6;
+
+ //statistic:
+ usbvision->ComprBlockTypes[BlockType]++;
+
+ Pos = ExtraPos;
+ if (BlockType == 0) {
+ if(RestPixel >= 24) {
+ Idx += 23;
+ RestPixel -= 24;
+ Integrator = Decompressed[Idx];
+ } else {
+ Idx += RestPixel - 1;
+ RestPixel = 0;
+ }
+ } else {
+ BlockCode = Compressed[Pos];
+ Pos++;
+ if (RestPixel >= 24) {
+ BlockLen = 24;
+ } else {
+ BlockLen = RestPixel;
+ }
+ RestPixel -= BlockLen;
+ ExtraPos = Pos + (BlockLen / 4);
+ }
+ BlockTypeByte <<= 2;
+ BlockTypeLen -= 1;
+ }
+ if (BlockLen > 0) {
+ if ((BlockLen%4) == 0) {
+ BlockByte = Compressed[Pos];
+ Pos++;
+ }
+ if (BlockType == 1) { //inter Block
+ Integrator = Decompressed[Idx];
+ }
+ switch (BlockByte & 0xC0) {
+ case 0x03<<6:
+ Integrator += Compressed[ExtraPos];
+ ExtraPos++;
+ break;
+ case 0x02<<6:
+ Integrator += BlockCode;
+ break;
+ case 0x00:
+ Integrator -= BlockCode;
+ break;
+ }
+ Decompressed[Idx] = Integrator;
+ BlockByte <<= 2;
+ BlockLen -= 1;
+ }
+ }
+ *StartPos = ExtraPos;
+ *BlockTypeStartPos = BlockTypePos;
+ return Idx;
+}
+
+
+/*
+ * usbvision_parse_compress()
+ *
+ * Parse compressed frame from the scratch buffer, put
+ * decoded RGB value into the current frame buffer and add the written
+ * number of bytes (RGB) to the *pcopylen.
+ *
+ */
+static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
+ long *pcopylen)
+{
+#define USBVISION_STRIP_MAGIC 0x5A
+#define USBVISION_STRIP_LEN_MAX 400
+#define USBVISION_STRIP_HEADER_LEN 3
+
+ struct usbvision_frame *frame;
+ unsigned char *f,*u = NULL ,*v = NULL;
+ unsigned char StripData[USBVISION_STRIP_LEN_MAX];
+ unsigned char StripHeader[USBVISION_STRIP_HEADER_LEN];
+ int Idx, IdxEnd, StripLen, StripPtr, StartBlockPos, BlockPos, BlockTypePos;
+ int clipmask_index, bytes_per_pixel, rc;
+ int imageSize;
+ unsigned char rv, gv, bv;
+ static unsigned char *Y, *U, *V;
+
+ frame = usbvision->curFrame;
+ imageSize = frame->frmwidth * frame->frmheight;
+ if ( (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
+ (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) ) { // this is a planar format
+ //... v4l2_linesize not used here.
+ f = frame->data + (frame->width * frame->curline);
+ } else
+ f = frame->data + (frame->v4l2_linesize * frame->curline);
+
+ if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV){ //initialise u and v pointers
+ // get base of u and b planes add halfoffset
+
+ u = frame->data
+ + imageSize
+ + (frame->frmwidth >>1) * frame->curline ;
+ v = u + (imageSize >>1 );
+
+ } else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420){
+
+ v = frame->data + imageSize + ((frame->curline* (frame->width))>>2) ;
+ u = v + (imageSize >>2) ;
+ }
+
+ if (frame->curline == 0) {
+ usbvision_adjust_compression(usbvision);
+ }
+
+ if (scratch_len(usbvision) < USBVISION_STRIP_HEADER_LEN) {
+ return ParseState_Out;
+ }
+
+ //get strip header without changing the scratch_read_ptr
+ scratch_set_extra_ptr(usbvision, &StripPtr, 0);
+ scratch_get_extra(usbvision, &StripHeader[0], &StripPtr,
+ USBVISION_STRIP_HEADER_LEN);
+
+ if (StripHeader[0] != USBVISION_STRIP_MAGIC) {
+ // wrong strip magic
+ usbvision->stripMagicErrors++;
+ return ParseState_NextFrame;
+ }
+
+ if (frame->curline != (int)StripHeader[2]) {
+ //line number missmatch error
+ usbvision->stripLineNumberErrors++;
+ }
+
+ StripLen = 2 * (unsigned int)StripHeader[1];
+ if (StripLen > USBVISION_STRIP_LEN_MAX) {
+ // strip overrun
+ // I think this never happens
+ usbvision_request_intra(usbvision);
+ }
+
+ if (scratch_len(usbvision) < StripLen) {
+ //there is not enough data for the strip
+ return ParseState_Out;
+ }
+
+ if (usbvision->IntraFrameBuffer) {
+ Y = usbvision->IntraFrameBuffer + frame->frmwidth * frame->curline;
+ U = usbvision->IntraFrameBuffer + imageSize + (frame->frmwidth / 2) * (frame->curline / 2);
+ V = usbvision->IntraFrameBuffer + imageSize / 4 * 5 + (frame->frmwidth / 2) * (frame->curline / 2);
+ }
+ else {
+ return ParseState_NextFrame;
+ }
+
+ bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
+ clipmask_index = frame->curline * MAX_FRAME_WIDTH;
+
+ scratch_get(usbvision, StripData, StripLen);
+
+ IdxEnd = frame->frmwidth;
+ BlockTypePos = USBVISION_STRIP_HEADER_LEN;
+ StartBlockPos = BlockTypePos + (IdxEnd - 1) / 96 + (IdxEnd / 2 - 1) / 96 + 2;
+ BlockPos = StartBlockPos;
+
+ usbvision->BlockPos = BlockPos;
+
+ if ((rc = usbvision_decompress(usbvision, StripData, Y, &BlockPos, &BlockTypePos, IdxEnd)) != IdxEnd) {
+ //return ParseState_Continue;
+ }
+ if (StripLen > usbvision->maxStripLen) {
+ usbvision->maxStripLen = StripLen;
+ }
+
+ if (frame->curline%2) {
+ if ((rc = usbvision_decompress(usbvision, StripData, V, &BlockPos, &BlockTypePos, IdxEnd/2)) != IdxEnd/2) {
+ //return ParseState_Continue;
+ }
+ }
+ else {
+ if ((rc = usbvision_decompress(usbvision, StripData, U, &BlockPos, &BlockTypePos, IdxEnd/2)) != IdxEnd/2) {
+ //return ParseState_Continue;
+ }
+ }
+
+ if (BlockPos > usbvision->comprBlockPos) {
+ usbvision->comprBlockPos = BlockPos;
+ }
+ if (BlockPos > StripLen) {
+ usbvision->stripLenErrors++;
+ }
+
+ for (Idx = 0; Idx < IdxEnd; Idx++) {
+ if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+ *f++ = Y[Idx];
+ *f++ = Idx & 0x01 ? U[Idx/2] : V[Idx/2];
+ }
+ else if(frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) {
+ *f++ = Y[Idx];
+ if ( Idx & 0x01)
+ *u++ = U[Idx>>1] ;
+ else
+ *v++ = V[Idx>>1];
+ }
+ else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
+ *f++ = Y [Idx];
+ if ( !(( Idx & 0x01 ) | ( frame->curline & 0x01 )) ){
+
+/* only need do this for 1 in 4 pixels */
+/* intraframe buffer is YUV420 format */
+
+ *u++ = U[Idx >>1];
+ *v++ = V[Idx >>1];
+ }
+
+ }
+ else {
+ YUV_TO_RGB_BY_THE_BOOK(Y[Idx], U[Idx/2], V[Idx/2], rv, gv, bv);
+ switch (frame->v4l2_format.format) {
+ case V4L2_PIX_FMT_GREY:
+ *f++ = Y[Idx];
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 2));
+ *f++ = (0x03 & (gv >> 6)) | (0x7C & (rv >> 1));
+ break;
+ case V4L2_PIX_FMT_RGB565:
+ *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 3));
+ *f++ = (0x07 & (gv >> 5)) | (0xF8 & rv);
+ break;
+ case V4L2_PIX_FMT_RGB24:
+ *f++ = bv;
+ *f++ = gv;
+ *f++ = rv;
+ break;
+ case V4L2_PIX_FMT_RGB32:
+ *f++ = bv;
+ *f++ = gv;
+ *f++ = rv;
+ f++;
+ break;
+ }
+ }
+ clipmask_index++;
+ }
+ /* Deal with non-integer no. of bytes for YUV420P */
+ if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420 )
+ *pcopylen += frame->v4l2_linesize;
+ else
+ *pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1;
+
+ frame->curline += 1;
+
+ if (frame->curline >= frame->frmheight) {
+ return ParseState_NextFrame;
+ }
+ else {
+ return ParseState_Continue;
+ }
+
+}
+
+
+/*
+ * usbvision_parse_lines_420()
+ *
+ * Parse two lines from the scratch buffer, put
+ * decoded RGB value into the current frame buffer and add the written
+ * number of bytes (RGB) to the *pcopylen.
+ *
+ */
+static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision,
+ long *pcopylen)
+{
+ struct usbvision_frame *frame;
+ unsigned char *f_even = NULL, *f_odd = NULL;
+ unsigned int pixel_per_line, block;
+ int pixel, block_split;
+ int y_ptr, u_ptr, v_ptr, y_odd_offset;
+ const int y_block_size = 128;
+ const int uv_block_size = 64;
+ const int sub_block_size = 32;
+ const int y_step[] = { 0, 0, 0, 2 }, y_step_size = 4;
+ const int uv_step[]= { 0, 0, 0, 4 }, uv_step_size = 4;
+ unsigned char y[2], u, v; /* YUV components */
+ int y_, u_, v_, vb, uvg, ur;
+ int r_, g_, b_; /* RGB components */
+ unsigned char g;
+ int clipmask_even_index, clipmask_odd_index, bytes_per_pixel;
+ int clipmask_add, stretch_bytes;
+
+ frame = usbvision->curFrame;
+ f_even = frame->data + (frame->v4l2_linesize * frame->curline);
+ f_odd = f_even + frame->v4l2_linesize * usbvision->stretch_height;
+
+ /* Make sure there's enough data for the entire line */
+ /* In this mode usbvision transfer 3 bytes for every 2 pixels */
+ /* I need two lines to decode the color */
+ bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
+ stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel;
+ clipmask_even_index = frame->curline * MAX_FRAME_WIDTH;
+ clipmask_odd_index = clipmask_even_index + MAX_FRAME_WIDTH;
+ clipmask_add = usbvision->stretch_width;
+ pixel_per_line = frame->isocHeader.frameWidth;
+
+ if (scratch_len(usbvision) < (int)pixel_per_line * 3) {
+ //printk(KERN_DEBUG "out of data, need %d\n", len);
+ return ParseState_Out;
+ }
+
+ if ((frame->curline + 1) >= frame->frmheight) {
+ return ParseState_NextFrame;
+ }
+
+ block_split = (pixel_per_line%y_block_size) ? 1 : 0; //are some blocks splitted into different lines?
+
+ y_odd_offset = (pixel_per_line / y_block_size) * (y_block_size + uv_block_size)
+ + block_split * uv_block_size;
+
+ scratch_set_extra_ptr(usbvision, &y_ptr, y_odd_offset);
+ scratch_set_extra_ptr(usbvision, &u_ptr, y_block_size);
+ scratch_set_extra_ptr(usbvision, &v_ptr, y_odd_offset
+ + (4 - block_split) * sub_block_size);
+
+ for (block = 0; block < (pixel_per_line / sub_block_size);
+ block++) {
+
+
+ for (pixel = 0; pixel < sub_block_size; pixel +=2) {
+ scratch_get(usbvision, &y[0], 2);
+ scratch_get_extra(usbvision, &u, &u_ptr, 1);
+ scratch_get_extra(usbvision, &v, &v_ptr, 1);
+
+ //I don't use the YUV_TO_RGB macro for better performance
+ v_ = v - 128;
+ u_ = u - 128;
+ vb = 132252 * v_;
+ uvg= -53281 * u_ - 25625 * v_;
+ ur = 104595 * u_;
+
+ if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+ *f_even++ = y[0];
+ *f_even++ = v;
+ }
+ else {
+ y_ = 76284 * (y[0] - 16);
+
+ b_ = (y_ + vb) >> 16;
+ g_ = (y_ + uvg)>> 16;
+ r_ = (y_ + ur) >> 16;
+
+ switch (frame->v4l2_format.format) {
+ case V4L2_PIX_FMT_RGB565:
+ g = LIMIT_RGB(g_);
+ *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3));
+ *f_even++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_));
+ break;
+ case V4L2_PIX_FMT_RGB24:
+ *f_even++ = LIMIT_RGB(b_);
+ *f_even++ = LIMIT_RGB(g_);
+ *f_even++ = LIMIT_RGB(r_);
+ break;
+ case V4L2_PIX_FMT_RGB32:
+ *f_even++ = LIMIT_RGB(b_);
+ *f_even++ = LIMIT_RGB(g_);
+ *f_even++ = LIMIT_RGB(r_);
+ f_even++;
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ g = LIMIT_RGB(g_);
+ *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2));
+ *f_even++ = (0x03 & ( g >> 6)) |
+ (0x7C & (LIMIT_RGB(r_) >> 1));
+ break;
+ }
+ }
+ clipmask_even_index += clipmask_add;
+ f_even += stretch_bytes;
+
+ if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+ *f_even++ = y[1];
+ *f_even++ = u;
+ }
+ else {
+ y_ = 76284 * (y[1] - 16);
+
+ b_ = (y_ + vb) >> 16;
+ g_ = (y_ + uvg)>> 16;
+ r_ = (y_ + ur) >> 16;
+
+ switch (frame->v4l2_format.format) {
+ case V4L2_PIX_FMT_RGB565:
+ g = LIMIT_RGB(g_);
+ *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3));
+ *f_even++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_));
+ break;
+ case V4L2_PIX_FMT_RGB24:
+ *f_even++ = LIMIT_RGB(b_);
+ *f_even++ = LIMIT_RGB(g_);
+ *f_even++ = LIMIT_RGB(r_);
+ break;
+ case V4L2_PIX_FMT_RGB32:
+ *f_even++ = LIMIT_RGB(b_);
+ *f_even++ = LIMIT_RGB(g_);
+ *f_even++ = LIMIT_RGB(r_);
+ f_even++;
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ g = LIMIT_RGB(g_);
+ *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2));
+ *f_even++ = (0x03 & ( g >> 6)) |
+ (0x7C & (LIMIT_RGB(r_) >> 1));
+ break;
+ }
+ }
+ clipmask_even_index += clipmask_add;
+ f_even += stretch_bytes;
+
+ scratch_get_extra(usbvision, &y[0], &y_ptr, 2);
+
+ if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+ *f_odd++ = y[0];
+ *f_odd++ = v;
+ }
+ else {
+ y_ = 76284 * (y[0] - 16);
+
+ b_ = (y_ + vb) >> 16;
+ g_ = (y_ + uvg)>> 16;
+ r_ = (y_ + ur) >> 16;
+
+ switch (frame->v4l2_format.format) {
+ case V4L2_PIX_FMT_RGB565:
+ g = LIMIT_RGB(g_);
+ *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3));
+ *f_odd++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_));
+ break;
+ case V4L2_PIX_FMT_RGB24:
+ *f_odd++ = LIMIT_RGB(b_);
+ *f_odd++ = LIMIT_RGB(g_);
+ *f_odd++ = LIMIT_RGB(r_);
+ break;
+ case V4L2_PIX_FMT_RGB32:
+ *f_odd++ = LIMIT_RGB(b_);
+ *f_odd++ = LIMIT_RGB(g_);
+ *f_odd++ = LIMIT_RGB(r_);
+ f_odd++;
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ g = LIMIT_RGB(g_);
+ *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2));
+ *f_odd++ = (0x03 & ( g >> 6)) |
+ (0x7C & (LIMIT_RGB(r_) >> 1));
+ break;
+ }
+ }
+ clipmask_odd_index += clipmask_add;
+ f_odd += stretch_bytes;
+
+ if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+ *f_odd++ = y[1];
+ *f_odd++ = u;
+ }
+ else {
+ y_ = 76284 * (y[1] - 16);
+
+ b_ = (y_ + vb) >> 16;
+ g_ = (y_ + uvg)>> 16;
+ r_ = (y_ + ur) >> 16;
+
+ switch (frame->v4l2_format.format) {
+ case V4L2_PIX_FMT_RGB565:
+ g = LIMIT_RGB(g_);
+ *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3));
+ *f_odd++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_));
+ break;
+ case V4L2_PIX_FMT_RGB24:
+ *f_odd++ = LIMIT_RGB(b_);
+ *f_odd++ = LIMIT_RGB(g_);
+ *f_odd++ = LIMIT_RGB(r_);
+ break;
+ case V4L2_PIX_FMT_RGB32:
+ *f_odd++ = LIMIT_RGB(b_);
+ *f_odd++ = LIMIT_RGB(g_);
+ *f_odd++ = LIMIT_RGB(r_);
+ f_odd++;
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ g = LIMIT_RGB(g_);
+ *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2));
+ *f_odd++ = (0x03 & ( g >> 6)) |
+ (0x7C & (LIMIT_RGB(r_) >> 1));
+ break;
+ }
+ }
+ clipmask_odd_index += clipmask_add;
+ f_odd += stretch_bytes;
+ }
+
+ scratch_rm_old(usbvision,y_step[block % y_step_size] * sub_block_size);
+ scratch_inc_extra_ptr(&y_ptr, y_step[(block + 2 * block_split) % y_step_size]
+ * sub_block_size);
+ scratch_inc_extra_ptr(&u_ptr, uv_step[block % uv_step_size]
+ * sub_block_size);
+ scratch_inc_extra_ptr(&v_ptr, uv_step[(block + 2 * block_split) % uv_step_size]
+ * sub_block_size);
+ }
+
+ scratch_rm_old(usbvision, pixel_per_line * 3 / 2
+ + block_split * sub_block_size);
+
+ frame->curline += 2 * usbvision->stretch_height;
+ *pcopylen += frame->v4l2_linesize * 2 * usbvision->stretch_height;
+
+ if (frame->curline >= frame->frmheight)
+ return ParseState_NextFrame;
+ else
+ return ParseState_Continue;
+}
+
+/*
+ * usbvision_parse_data()
+ *
+ * Generic routine to parse the scratch buffer. It employs either
+ * usbvision_find_header() or usbvision_parse_lines() to do most
+ * of work.
+ *
+ */
+static void usbvision_parse_data(struct usb_usbvision *usbvision)
+{
+ struct usbvision_frame *frame;
+ enum ParseState newstate;
+ long copylen = 0;
+ unsigned long lock_flags;
+
+ frame = usbvision->curFrame;
+
+ PDEBUG(DBG_PARSE, "parsing len=%d\n", scratch_len(usbvision));
+
+ while (1) {
+
+ newstate = ParseState_Out;
+ if (scratch_len(usbvision)) {
+ if (frame->scanstate == ScanState_Scanning) {
+ newstate = usbvision_find_header(usbvision);
+ }
+ else if (frame->scanstate == ScanState_Lines) {
+ if (usbvision->isocMode == ISOC_MODE_YUV420) {
+ newstate = usbvision_parse_lines_420(usbvision, ©len);
+ }
+ else if (usbvision->isocMode == ISOC_MODE_YUV422) {
+ newstate = usbvision_parse_lines_422(usbvision, ©len);
+ }
+ else if (usbvision->isocMode == ISOC_MODE_COMPRESS) {
+ newstate = usbvision_parse_compress(usbvision, ©len);
+ }
+
+ }
+ }
+ if (newstate == ParseState_Continue) {
+ continue;
+ }
+ else if ((newstate == ParseState_NextFrame) || (newstate == ParseState_Out)) {
+ break;
+ }
+ else {
+ return; /* ParseState_EndParse */
+ }
+ }
+
+ if (newstate == ParseState_NextFrame) {
+ frame->grabstate = FrameState_Done;
+ do_gettimeofday(&(frame->timestamp));
+ frame->sequence = usbvision->frame_num;
+
+ spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
+ list_move_tail(&(frame->frame), &usbvision->outqueue);
+ usbvision->curFrame = NULL;
+ spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
+
+ usbvision->frame_num++;
+
+ /* This will cause the process to request another frame. */
+ if (waitqueue_active(&usbvision->wait_frame)) {
+ PDEBUG(DBG_PARSE, "Wake up !");
+ wake_up_interruptible(&usbvision->wait_frame);
+ }
+ }
+ else
+ frame->grabstate = FrameState_Grabbing;
+
+
+ /* Update the frame's uncompressed length. */
+ frame->scanlength += copylen;
+}
+
+
+/*
+ * Make all of the blocks of data contiguous
+ */
+static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
+ struct urb *urb)
+{
+ unsigned char *packet_data;
+ int i, totlen = 0;
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ int packet_len = urb->iso_frame_desc[i].actual_length;
+ int packet_stat = urb->iso_frame_desc[i].status;
+
+ packet_data = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+
+ /* Detect and ignore errored packets */
+ if (packet_stat) { // packet_stat != 0 ?????????????
+ PDEBUG(DBG_ISOC, "data error: [%d] len=%d, status=%X", i, packet_len, packet_stat);
+ usbvision->isocErrCount++;
+ continue;
+ }
+
+ /* Detect and ignore empty packets */
+ if (packet_len < 0) {
+ PDEBUG(DBG_ISOC, "error packet [%d]", i);
+ usbvision->isocSkipCount++;
+ continue;
+ }
+ else if (packet_len == 0) { /* Frame end ????? */
+ PDEBUG(DBG_ISOC, "null packet [%d]", i);
+ usbvision->isocstate=IsocState_NoFrame;
+ usbvision->isocSkipCount++;
+ continue;
+ }
+ else if (packet_len > usbvision->isocPacketSize) {
+ PDEBUG(DBG_ISOC, "packet[%d] > isocPacketSize", i);
+ usbvision->isocSkipCount++;
+ continue;
+ }
+
+ PDEBUG(DBG_ISOC, "packet ok [%d] len=%d", i, packet_len);
+
+ if (usbvision->isocstate==IsocState_NoFrame) { //new frame begins
+ usbvision->isocstate=IsocState_InFrame;
+ scratch_mark_header(usbvision);
+ usbvision_measure_bandwidth(usbvision);
+ PDEBUG(DBG_ISOC, "packet with header");
+ }
+
+ /*
+ * If usbvision continues to feed us with data but there is no
+ * consumption (if, for example, V4L client fell asleep) we
+ * may overflow the buffer. We have to move old data over to
+ * free room for new data. This is bad for old data. If we
+ * just drop new data then it's bad for new data... choose
+ * your favorite evil here.
+ */
+ if (scratch_free(usbvision) < packet_len) {
+
+ usbvision->scratch_ovf_count++;
+ PDEBUG(DBG_ISOC, "scratch buf overflow! scr_len: %d, n: %d",
+ scratch_len(usbvision), packet_len);
+ scratch_rm_old(usbvision, packet_len - scratch_free(usbvision));
+ }
+
+ /* Now we know that there is enough room in scratch buffer */
+ scratch_put(usbvision, packet_data, packet_len);
+ totlen += packet_len;
+ usbvision->isocDataCount += packet_len;
+ usbvision->isocPacketCount++;
+ }
+#if ENABLE_HEXDUMP
+ if (totlen > 0) {
+ static int foo = 0;
+ if (foo < 1) {
+ printk(KERN_DEBUG "+%d.\n", usbvision->scratchlen);
+ usbvision_hexdump(data0, (totlen > 64) ? 64 : totlen);
+ ++foo;
+ }
+ }
+#endif
+ return totlen;
+}
+
+static void usbvision_isocIrq(struct urb *urb)
+{
+ int errCode = 0;
+ int len;
+ struct usb_usbvision *usbvision = urb->context;
+ int i;
+ unsigned long startTime = jiffies;
+ struct usbvision_frame **f;
+
+ /* We don't want to do anything if we are about to be removed! */
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return;
+
+ f = &usbvision->curFrame;
+
+ /* Manage streaming interruption */
+ if (usbvision->streaming == Stream_Interrupt) {
+ usbvision->streaming = Stream_Idle;
+ if ((*f)) {
+ (*f)->grabstate = FrameState_Ready;
+ (*f)->scanstate = ScanState_Scanning;
+ }
+ PDEBUG(DBG_IRQ, "stream interrupted");
+ wake_up_interruptible(&usbvision->wait_stream);
+ }
+
+ /* Copy the data received into our scratch buffer */
+ len = usbvision_compress_isochronous(usbvision, urb);
+
+ usbvision->isocUrbCount++;
+ usbvision->urb_length = len;
+
+ if (usbvision->streaming == Stream_On) {
+
+ /* If we collected enough data let's parse! */
+ if (scratch_len(usbvision) > USBVISION_HEADER_LENGTH) { /* 12 == header_length */
+ /*If we don't have a frame we're current working on, complain */
+ if(!list_empty(&(usbvision->inqueue))) {
+ if (!(*f)) {
+ (*f) = list_entry(usbvision->inqueue.next,struct usbvision_frame, frame);
+ }
+ usbvision_parse_data(usbvision);
+ }
+ else {
+ PDEBUG(DBG_IRQ, "received data, but no one needs it");
+ scratch_reset(usbvision);
+ }
+ }
+ }
+ else {
+ PDEBUG(DBG_IRQ, "received data, but no one needs it");
+ scratch_reset(usbvision);
+ }
+
+ usbvision->timeInIrq += jiffies - startTime;
+
+ for (i = 0; i < USBVISION_URB_FRAMES; i++) {
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = 0;
+ }
+
+ urb->status = 0;
+ urb->dev = usbvision->dev;
+ errCode = usb_submit_urb (urb, GFP_ATOMIC);
+
+ /* Disable this warning. By design of the driver. */
+ // if(errCode) {
+ // err("%s: usb_submit_urb failed: error %d", __FUNCTION__, errCode);
+ // }
+
+ return;
+}
+
+/*************************************/
+/* Low level usbvision access functions */
+/*************************************/
+
+/*
+ * usbvision_read_reg()
+ *
+ * return < 0 -> Error
+ * >= 0 -> Data
+ */
+
+int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg)
+{
+ int errCode = 0;
+ unsigned char buffer[1];
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return -1;
+
+ errCode = usb_control_msg(usbvision->dev, usb_rcvctrlpipe(usbvision->dev, 1),
+ USBVISION_OP_CODE,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
+ 0, (__u16) reg, buffer, 1, HZ);
+
+ if (errCode < 0) {
+ err("%s: failed: error %d", __FUNCTION__, errCode);
+ return errCode;
+ }
+ return buffer[0];
+}
+
+/*
+ * usbvision_write_reg()
+ *
+ * return 1 -> Reg written
+ * 0 -> usbvision is not yet ready
+ * -1 -> Something went wrong
+ */
+
+int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg,
+ unsigned char value)
+{
+ int errCode = 0;
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return 0;
+
+ errCode = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+ USBVISION_OP_CODE,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_ENDPOINT, 0, (__u16) reg, &value, 1, HZ);
+
+ if (errCode < 0) {
+ err("%s: failed: error %d", __FUNCTION__, errCode);
+ }
+ return errCode;
+}
+
+
+static void usbvision_ctrlUrb_complete(struct urb *urb)
+{
+ struct usb_usbvision *usbvision = (struct usb_usbvision *)urb->context;
+
+ PDEBUG(DBG_IRQ, "");
+ usbvision->ctrlUrbBusy = 0;
+ if (waitqueue_active(&usbvision->ctrlUrb_wq)) {
+ wake_up_interruptible(&usbvision->ctrlUrb_wq);
+ }
+}
+
+
+static int usbvision_write_reg_irq(struct usb_usbvision *usbvision,int address,
+ unsigned char *data, int len)
+{
+ int errCode = 0;
+
+ PDEBUG(DBG_IRQ, "");
+ if (len > 8) {
+ return -EFAULT;
+ }
+// down(&usbvision->ctrlUrbLock);
+ if (usbvision->ctrlUrbBusy) {
+// up(&usbvision->ctrlUrbLock);
+ return -EBUSY;
+ }
+ usbvision->ctrlUrbBusy = 1;
+// up(&usbvision->ctrlUrbLock);
+
+ usbvision->ctrlUrbSetup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
+ usbvision->ctrlUrbSetup.bRequest = USBVISION_OP_CODE;
+ usbvision->ctrlUrbSetup.wValue = 0;
+ usbvision->ctrlUrbSetup.wIndex = cpu_to_le16(address);
+ usbvision->ctrlUrbSetup.wLength = cpu_to_le16(len);
+ usb_fill_control_urb (usbvision->ctrlUrb, usbvision->dev,
+ usb_sndctrlpipe(usbvision->dev, 1),
+ (unsigned char *)&usbvision->ctrlUrbSetup,
+ (void *)usbvision->ctrlUrbBuffer, len,
+ usbvision_ctrlUrb_complete,
+ (void *)usbvision);
+
+ memcpy(usbvision->ctrlUrbBuffer, data, len);
+
+ errCode = usb_submit_urb(usbvision->ctrlUrb, GFP_ATOMIC);
+ if (errCode < 0) {
+ // error in usb_submit_urb()
+ usbvision->ctrlUrbBusy = 0;
+ }
+ PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, errCode);
+ return errCode;
+}
+
+
+static int usbvision_init_compression(struct usb_usbvision *usbvision)
+{
+ int errCode = 0;
+
+ usbvision->lastIsocFrameNum = -1;
+ usbvision->isocDataCount = 0;
+ usbvision->isocPacketCount = 0;
+ usbvision->isocSkipCount = 0;
+ usbvision->comprLevel = 50;
+ usbvision->lastComprLevel = -1;
+ usbvision->isocUrbCount = 0;
+ usbvision->requestIntra = 1;
+ usbvision->isocMeasureBandwidthCount = 0;
+
+ return errCode;
+}
+
+/* this function measures the used bandwidth since last call
+ * return: 0 : no error
+ * sets usedBandwidth to 1-100 : 1-100% of full bandwidth resp. to isocPacketSize
+ */
+static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision)
+{
+ int errCode = 0;
+
+ if (usbvision->isocMeasureBandwidthCount < 2) { // this gives an average bandwidth of 3 frames
+ usbvision->isocMeasureBandwidthCount++;
+ return errCode;
+ }
+ if ((usbvision->isocPacketSize > 0) && (usbvision->isocPacketCount > 0)) {
+ usbvision->usedBandwidth = usbvision->isocDataCount /
+ (usbvision->isocPacketCount + usbvision->isocSkipCount) *
+ 100 / usbvision->isocPacketSize;
+ }
+ usbvision->isocMeasureBandwidthCount = 0;
+ usbvision->isocDataCount = 0;
+ usbvision->isocPacketCount = 0;
+ usbvision->isocSkipCount = 0;
+ return errCode;
+}
+
+static int usbvision_adjust_compression (struct usb_usbvision *usbvision)
+{
+ int errCode = 0;
+ unsigned char buffer[6];
+
+ PDEBUG(DBG_IRQ, "");
+ if ((adjustCompression) && (usbvision->usedBandwidth > 0)) {
+ usbvision->comprLevel += (usbvision->usedBandwidth - 90) / 2;
+ RESTRICT_TO_RANGE(usbvision->comprLevel, 0, 100);
+ if (usbvision->comprLevel != usbvision->lastComprLevel) {
+ int distorsion;
+ if (usbvision->bridgeType == BRIDGE_NT1004 || usbvision->bridgeType == BRIDGE_NT1005) {
+ buffer[0] = (unsigned char)(4 + 16 * usbvision->comprLevel / 100); // PCM Threshold 1
+ buffer[1] = (unsigned char)(4 + 8 * usbvision->comprLevel / 100); // PCM Threshold 2
+ distorsion = 7 + 248 * usbvision->comprLevel / 100;
+ buffer[2] = (unsigned char)(distorsion & 0xFF); // Average distorsion Threshold (inter)
+ buffer[3] = (unsigned char)(distorsion & 0xFF); // Average distorsion Threshold (intra)
+ distorsion = 1 + 42 * usbvision->comprLevel / 100;
+ buffer[4] = (unsigned char)(distorsion & 0xFF); // Maximum distorsion Threshold (inter)
+ buffer[5] = (unsigned char)(distorsion & 0xFF); // Maximum distorsion Threshold (intra)
+ }
+ else { //BRIDGE_NT1003
+ buffer[0] = (unsigned char)(4 + 16 * usbvision->comprLevel / 100); // PCM threshold 1
+ buffer[1] = (unsigned char)(4 + 8 * usbvision->comprLevel / 100); // PCM threshold 2
+ distorsion = 2 + 253 * usbvision->comprLevel / 100;
+ buffer[2] = (unsigned char)(distorsion & 0xFF); // distorsion threshold bit0-7
+ buffer[3] = 0; //(unsigned char)((distorsion >> 8) & 0x0F); // distorsion threshold bit 8-11
+ distorsion = 0 + 43 * usbvision->comprLevel / 100;
+ buffer[4] = (unsigned char)(distorsion & 0xFF); // maximum distorsion bit0-7
+ buffer[5] = 0; //(unsigned char)((distorsion >> 8) & 0x01); // maximum distorsion bit 8
+ }
+ errCode = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6);
+ if (errCode == 0){
+ PDEBUG(DBG_IRQ, "new compr params %#02x %#02x %#02x %#02x %#02x %#02x", buffer[0],
+ buffer[1], buffer[2], buffer[3], buffer[4], buffer[5]);
+ usbvision->lastComprLevel = usbvision->comprLevel;
+ }
+ }
+ }
+ return errCode;
+}
+
+static int usbvision_request_intra (struct usb_usbvision *usbvision)
+{
+ int errCode = 0;
+ unsigned char buffer[1];
+
+ PDEBUG(DBG_IRQ, "");
+ usbvision->requestIntra = 1;
+ buffer[0] = 1;
+ usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1);
+ return errCode;
+}
+
+static int usbvision_unrequest_intra (struct usb_usbvision *usbvision)
+{
+ int errCode = 0;
+ unsigned char buffer[1];
+
+ PDEBUG(DBG_IRQ, "");
+ usbvision->requestIntra = 0;
+ buffer[0] = 0;
+ usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1);
+ return errCode;
+}
+
+/*******************************
+ * usbvision utility functions
+ *******************************/
+
+int usbvision_power_off(struct usb_usbvision *usbvision)
+{
+ int errCode = 0;
+
+ PDEBUG(DBG_FUNC, "");
+
+ errCode = usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
+ if (errCode == 1) {
+ usbvision->power = 0;
+ }
+ PDEBUG(DBG_FUNC, "%s: errCode %d", (errCode!=1)?"ERROR":"power is off", errCode);
+ return errCode;
+}
+
+/*
+ * usbvision_set_video_format()
+ *
+ */
+static int usbvision_set_video_format(struct usb_usbvision *usbvision, int format)
+{
+ static const char proc[] = "usbvision_set_video_format";
+ int rc;
+ unsigned char value[2];
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return 0;
+
+ PDEBUG(DBG_FUNC, "isocMode %#02x", format);
+
+ if ((format != ISOC_MODE_YUV422)
+ && (format != ISOC_MODE_YUV420)
+ && (format != ISOC_MODE_COMPRESS)) {
+ printk(KERN_ERR "usbvision: unknown video format %02x, using default YUV420",
+ format);
+ format = ISOC_MODE_YUV420;
+ }
+ value[0] = 0x0A; //TODO: See the effect of the filter
+ value[1] = format;
+ rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+ USBVISION_OP_CODE,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_ENDPOINT, 0,
+ (__u16) USBVISION_FILT_CONT, value, 2, HZ);
+
+ if (rc < 0) {
+ printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - "
+ "reconnect or reload driver.\n", proc, rc);
+ }
+ usbvision->isocMode = format;
+ return rc;
+}
+
+/*
+ * usbvision_set_output()
+ *
+ */
+
+int usbvision_set_output(struct usb_usbvision *usbvision, int width,
+ int height)
+{
+ int errCode = 0;
+ int UsbWidth, UsbHeight;
+ unsigned int frameRate=0, frameDrop=0;
+ unsigned char value[4];
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision)) {
+ return 0;
+ }
+
+ if (width > MAX_USB_WIDTH) {
+ UsbWidth = width / 2;
+ usbvision->stretch_width = 2;
+ }
+ else {
+ UsbWidth = width;
+ usbvision->stretch_width = 1;
+ }
+
+ if (height > MAX_USB_HEIGHT) {
+ UsbHeight = height / 2;
+ usbvision->stretch_height = 2;
+ }
+ else {
+ UsbHeight = height;
+ usbvision->stretch_height = 1;
+ }
+
+ RESTRICT_TO_RANGE(UsbWidth, MIN_FRAME_WIDTH, MAX_USB_WIDTH);
+ UsbWidth &= ~(MIN_FRAME_WIDTH-1);
+ RESTRICT_TO_RANGE(UsbHeight, MIN_FRAME_HEIGHT, MAX_USB_HEIGHT);
+ UsbHeight &= ~(1);
+
+ PDEBUG(DBG_FUNC, "usb %dx%d; screen %dx%d; stretch %dx%d",
+ UsbWidth, UsbHeight, width, height,
+ usbvision->stretch_width, usbvision->stretch_height);
+
+ /* I'll not rewrite the same values */
+ if ((UsbWidth != usbvision->curwidth) || (UsbHeight != usbvision->curheight)) {
+ value[0] = UsbWidth & 0xff; //LSB
+ value[1] = (UsbWidth >> 8) & 0x03; //MSB
+ value[2] = UsbHeight & 0xff; //LSB
+ value[3] = (UsbHeight >> 8) & 0x03; //MSB
+
+ errCode = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+ USBVISION_OP_CODE,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
+ 0, (__u16) USBVISION_LXSIZE_O, value, 4, HZ);
+
+ if (errCode < 0) {
+ err("%s failed: error %d", __FUNCTION__, errCode);
+ return errCode;
+ }
+ usbvision->curwidth = usbvision->stretch_width * UsbWidth;
+ usbvision->curheight = usbvision->stretch_height * UsbHeight;
+ }
+
+ if (usbvision->isocMode == ISOC_MODE_YUV422) {
+ frameRate = (usbvision->isocPacketSize * 1000) / (UsbWidth * UsbHeight * 2);
+ }
+ else if (usbvision->isocMode == ISOC_MODE_YUV420) {
+ frameRate = (usbvision->isocPacketSize * 1000) / ((UsbWidth * UsbHeight * 12) / 8);
+ }
+ else {
+ frameRate = FRAMERATE_MAX;
+ }
+
+ if (usbvision->tvnorm->id & V4L2_STD_625_50) {
+ frameDrop = frameRate * 32 / 25 - 1;
+ }
+ else if (usbvision->tvnorm->id & V4L2_STD_525_60) {
+ frameDrop = frameRate * 32 / 30 - 1;
+ }
+
+ RESTRICT_TO_RANGE(frameDrop, FRAMERATE_MIN, FRAMERATE_MAX);
+
+ PDEBUG(DBG_FUNC, "frameRate %d fps, frameDrop %d", frameRate, frameDrop);
+
+ frameDrop = FRAMERATE_MAX; // We can allow the maximum here, because dropping is controlled
+
+ /* frameDrop = 7; => framePhase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ...
+ => frameSkip = 4;
+ => frameRate = (7 + 1) * 25 / 32 = 200 / 32 = 6.25;
+
+ frameDrop = 9; => framePhase = 1, 5, 8, 11, 14, 17, 21, 24, 27, 1, 4, 8, ...
+ => frameSkip = 4, 3, 3, 3, 3, 4, 3, 3, 3, 3, 4, ...
+ => frameRate = (9 + 1) * 25 / 32 = 250 / 32 = 7.8125;
+ */
+ errCode = usbvision_write_reg(usbvision, USBVISION_FRM_RATE, frameDrop);
+ return errCode;
+}
+
+
+/*
+ * usbvision_frames_alloc
+ * allocate the maximum frames this driver can manage
+ */
+int usbvision_frames_alloc(struct usb_usbvision *usbvision)
+{
+ int i;
+
+ /* Allocate memory for the frame buffers */
+ usbvision->max_frame_size = MAX_FRAME_SIZE;
+ usbvision->fbuf_size = USBVISION_NUMFRAMES * usbvision->max_frame_size;
+ usbvision->fbuf = usbvision_rvmalloc(usbvision->fbuf_size);
+
+ if(usbvision->fbuf == NULL) {
+ err("%s: unable to allocate %d bytes for fbuf ",
+ __FUNCTION__, usbvision->fbuf_size);
+ return -ENOMEM;
+ }
+ spin_lock_init(&usbvision->queue_lock);
+ init_waitqueue_head(&usbvision->wait_frame);
+ init_waitqueue_head(&usbvision->wait_stream);
+
+ /* Allocate all buffers */
+ for (i = 0; i < USBVISION_NUMFRAMES; i++) {
+ usbvision->frame[i].index = i;
+ usbvision->frame[i].grabstate = FrameState_Unused;
+ usbvision->frame[i].data = usbvision->fbuf +
+ i * usbvision->max_frame_size;
+ /*
+ * Set default sizes for read operation.
+ */
+ usbvision->stretch_width = 1;
+ usbvision->stretch_height = 1;
+ usbvision->frame[i].width = usbvision->curwidth;
+ usbvision->frame[i].height = usbvision->curheight;
+ usbvision->frame[i].bytes_read = 0;
+ }
+ return 0;
+}
+
+/*
+ * usbvision_frames_free
+ * frees memory allocated for the frames
+ */
+void usbvision_frames_free(struct usb_usbvision *usbvision)
+{
+ /* Have to free all that memory */
+ if (usbvision->fbuf != NULL) {
+ usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size);
+ usbvision->fbuf = NULL;
+ }
+}
+/*
+ * usbvision_empty_framequeues()
+ * prepare queues for incoming and outgoing frames
+ */
+void usbvision_empty_framequeues(struct usb_usbvision *usbvision)
+{
+ u32 i;
+
+ INIT_LIST_HEAD(&(usbvision->inqueue));
+ INIT_LIST_HEAD(&(usbvision->outqueue));
+
+ for (i = 0; i < USBVISION_NUMFRAMES; i++) {
+ usbvision->frame[i].grabstate = FrameState_Unused;
+ usbvision->frame[i].bytes_read = 0;
+ }
+}
+
+/*
+ * usbvision_stream_interrupt()
+ * stops streaming
+ */
+int usbvision_stream_interrupt(struct usb_usbvision *usbvision)
+{
+ int ret = 0;
+
+ /* stop reading from the device */
+
+ usbvision->streaming = Stream_Interrupt;
+ ret = wait_event_timeout(usbvision->wait_stream,
+ (usbvision->streaming == Stream_Idle),
+ msecs_to_jiffies(USBVISION_NUMSBUF*USBVISION_URB_FRAMES));
+ return ret;
+}
+
+/*
+ * usbvision_set_compress_params()
+ *
+ */
+
+static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
+{
+ static const char proc[] = "usbvision_set_compresion_params: ";
+ int rc;
+ unsigned char value[6];
+
+ value[0] = 0x0F; // Intra-Compression cycle
+ value[1] = 0x01; // Reg.45 one line per strip
+ value[2] = 0x00; // Reg.46 Force intra mode on all new frames
+ value[3] = 0x00; // Reg.47 FORCE_UP <- 0 normal operation (not force)
+ value[4] = 0xA2; // Reg.48 BUF_THR I'm not sure if this does something in not compressed mode.
+ value[5] = 0x00; // Reg.49 DVI_YUV This has nothing to do with compression
+
+ //catched values for NT1004
+ // value[0] = 0xFF; // Never apply intra mode automatically
+ // value[1] = 0xF1; // Use full frame height for virtual strip width; One line per strip
+ // value[2] = 0x01; // Force intra mode on all new frames
+ // value[3] = 0x00; // Strip size 400 Bytes; do not force up
+ // value[4] = 0xA2; //
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return 0;
+
+ rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+ USBVISION_OP_CODE,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_ENDPOINT, 0,
+ (__u16) USBVISION_INTRA_CYC, value, 5, HZ);
+
+ if (rc < 0) {
+ printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
+ "reconnect or reload driver.\n", proc, rc);
+ return rc;
+ }
+
+ if (usbvision->bridgeType == BRIDGE_NT1004) {
+ value[0] = 20; // PCM Threshold 1
+ value[1] = 12; // PCM Threshold 2
+ value[2] = 255; // Distorsion Threshold inter
+ value[3] = 255; // Distorsion Threshold intra
+ value[4] = 43; // Max Distorsion inter
+ value[5] = 43; // Max Distorsion intra
+ }
+ else {
+ value[0] = 20; // PCM Threshold 1
+ value[1] = 12; // PCM Threshold 2
+ value[2] = 255; // Distorsion Threshold d7-d0
+ value[3] = 0; // Distorsion Threshold d11-d8
+ value[4] = 43; // Max Distorsion d7-d0
+ value[5] = 0; // Max Distorsion d8
+ }
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return 0;
+
+ rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+ USBVISION_OP_CODE,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_ENDPOINT, 0,
+ (__u16) USBVISION_PCM_THR1, value, 6, HZ);
+
+ if (rc < 0) {
+ printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
+ "reconnect or reload driver.\n", proc, rc);
+ return rc;
+ }
+
+
+ return rc;
+}
+
+
+/*
+ * usbvision_set_input()
+ *
+ * Set the input (saa711x, ...) size x y and other misc input params
+ * I've no idea if this parameters are right
+ *
+ */
+int usbvision_set_input(struct usb_usbvision *usbvision)
+{
+ static const char proc[] = "usbvision_set_input: ";
+ int rc;
+ unsigned char value[8];
+ unsigned char dvi_yuv_value;
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return 0;
+
+ /* Set input format expected from decoder*/
+ if (usbvision_device_data[usbvision->DevModel].Vin_Reg1 >= 0) {
+ value[0] = usbvision_device_data[usbvision->DevModel].Vin_Reg1 & 0xff;
+ } else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) {
+ /* SAA7113 uses 8 bit output */
+ value[0] = USBVISION_8_422_SYNC;
+ } else {
+ /* I'm sure only about d2-d0 [010] 16 bit 4:2:2 usin sync pulses
+ * as that is how saa7111 is configured */
+ value[0] = USBVISION_16_422_SYNC;
+ /* | USBVISION_VSNC_POL | USBVISION_VCLK_POL);*/
+ }
+
+ rc = usbvision_write_reg(usbvision, USBVISION_VIN_REG1, value[0]);
+ if (rc < 0) {
+ printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
+ "reconnect or reload driver.\n", proc, rc);
+ return rc;
+ }
+
+
+ if (usbvision->tvnorm->id & V4L2_STD_PAL) {
+ value[0] = 0xC0;
+ value[1] = 0x02; //0x02C0 -> 704 Input video line length
+ value[2] = 0x20;
+ value[3] = 0x01; //0x0120 -> 288 Input video n. of lines
+ value[4] = 0x60;
+ value[5] = 0x00; //0x0060 -> 96 Input video h offset
+ value[6] = 0x16;
+ value[7] = 0x00; //0x0016 -> 22 Input video v offset
+ } else if (usbvision->tvnorm->id & V4L2_STD_SECAM) {
+ value[0] = 0xC0;
+ value[1] = 0x02; //0x02C0 -> 704 Input video line length
+ value[2] = 0x20;
+ value[3] = 0x01; //0x0120 -> 288 Input video n. of lines
+ value[4] = 0x01;
+ value[5] = 0x00; //0x0001 -> 01 Input video h offset
+ value[6] = 0x01;
+ value[7] = 0x00; //0x0001 -> 01 Input video v offset
+ } else { /* V4L2_STD_NTSC */
+ value[0] = 0xD0;
+ value[1] = 0x02; //0x02D0 -> 720 Input video line length
+ value[2] = 0xF0;
+ value[3] = 0x00; //0x00F0 -> 240 Input video number of lines
+ value[4] = 0x50;
+ value[5] = 0x00; //0x0050 -> 80 Input video h offset
+ value[6] = 0x10;
+ value[7] = 0x00; //0x0010 -> 16 Input video v offset
+ }
+
+ if (usbvision_device_data[usbvision->DevModel].X_Offset >= 0) {
+ value[4]=usbvision_device_data[usbvision->DevModel].X_Offset & 0xff;
+ value[5]=(usbvision_device_data[usbvision->DevModel].X_Offset & 0x0300) >> 8;
+ }
+
+ if (usbvision_device_data[usbvision->DevModel].Y_Offset >= 0) {
+ value[6]=usbvision_device_data[usbvision->DevModel].Y_Offset & 0xff;
+ value[7]=(usbvision_device_data[usbvision->DevModel].Y_Offset & 0x0300) >> 8;
+ }
+
+ rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+ USBVISION_OP_CODE, /* USBVISION specific code */
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0,
+ (__u16) USBVISION_LXSIZE_I, value, 8, HZ);
+ if (rc < 0) {
+ printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
+ "reconnect or reload driver.\n", proc, rc);
+ return rc;
+ }
+
+
+ dvi_yuv_value = 0x00; /* U comes after V, Ya comes after U/V, Yb comes after Yb */
+
+ if(usbvision_device_data[usbvision->DevModel].Dvi_yuv >= 0){
+ dvi_yuv_value = usbvision_device_data[usbvision->DevModel].Dvi_yuv & 0xff;
+ }
+ else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) {
+ /* This changes as the fine sync control changes. Further investigation necessary */
+ dvi_yuv_value = 0x06;
+ }
+
+ return (usbvision_write_reg(usbvision, USBVISION_DVI_YUV, dvi_yuv_value));
+}
+
+
+/*
+ * usbvision_set_dram_settings()
+ *
+ * Set the buffer address needed by the usbvision dram to operate
+ * This values has been taken with usbsnoop.
+ *
+ */
+
+static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
+{
+ int rc;
+ unsigned char value[8];
+
+ if (usbvision->isocMode == ISOC_MODE_COMPRESS) {
+ value[0] = 0x42;
+ value[1] = 0x71;
+ value[2] = 0xff;
+ value[3] = 0x00;
+ value[4] = 0x98;
+ value[5] = 0xe0;
+ value[6] = 0x71;
+ value[7] = 0xff;
+ // UR: 0x0E200-0x3FFFF = 204288 Words (1 Word = 2 Byte)
+ // FDL: 0x00000-0x0E099 = 57498 Words
+ // VDW: 0x0E3FF-0x3FFFF
+ }
+ else {
+ value[0] = 0x42;
+ value[1] = 0x00;
+ value[2] = 0xff;
+ value[3] = 0x00;
+ value[4] = 0x00;
+ value[5] = 0x00;
+ value[6] = 0x00;
+ value[7] = 0xff;
+ }
+ /* These are the values of the address of the video buffer,
+ * they have to be loaded into the USBVISION_DRM_PRM1-8
+ *
+ * Start address of video output buffer for read: drm_prm1-2 -> 0x00000
+ * End address of video output buffer for read: drm_prm1-3 -> 0x1ffff
+ * Start address of video frame delay buffer: drm_prm1-4 -> 0x20000
+ * Only used in compressed mode
+ * End address of video frame delay buffer: drm_prm1-5-6 -> 0x3ffff
+ * Only used in compressed mode
+ * Start address of video output buffer for write: drm_prm1-7 -> 0x00000
+ * End address of video output buffer for write: drm_prm1-8 -> 0x1ffff
+ */
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return 0;
+
+ rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+ USBVISION_OP_CODE, /* USBVISION specific code */
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_ENDPOINT, 0,
+ (__u16) USBVISION_DRM_PRM1, value, 8, HZ);
+
+ if (rc < 0) {
+ err("%sERROR=%d", __FUNCTION__, rc);
+ return rc;
+ }
+
+ /* Restart the video buffer logic */
+ if ((rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, USBVISION_RES_UR |
+ USBVISION_RES_FDL | USBVISION_RES_VDW)) < 0)
+ return rc;
+ rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, 0x00);
+
+ return rc;
+}
+
+/*
+ * ()
+ *
+ * Power on the device, enables suspend-resume logic
+ * & reset the isoc End-Point
+ *
+ */
+
+int usbvision_power_on(struct usb_usbvision *usbvision)
+{
+ int errCode = 0;
+
+ PDEBUG(DBG_FUNC, "");
+
+ usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
+ usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+ USBVISION_SSPND_EN | USBVISION_RES2);
+ usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+ USBVISION_SSPND_EN | USBVISION_PWR_VID);
+ errCode = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+ USBVISION_SSPND_EN | USBVISION_PWR_VID | USBVISION_RES2);
+ if (errCode == 1) {
+ usbvision->power = 1;
+ }
+ PDEBUG(DBG_FUNC, "%s: errCode %d", (errCode<0)?"ERROR":"power is on", errCode);
+ return errCode;
+}
+
+
+/*
+ * usbvision timer stuff
+ */
+
+// to call usbvision_power_off from task queue
+static void call_usbvision_power_off(struct work_struct *work)
+{
+ struct usb_usbvision *usbvision = container_of(work, struct usb_usbvision, powerOffWork);
+
+ PDEBUG(DBG_FUNC, "");
+ down_interruptible(&usbvision->lock);
+ if(usbvision->user == 0) {
+ usbvision_i2c_usb_del_bus(&usbvision->i2c_adap);
+
+ usbvision_power_off(usbvision);
+ usbvision->initialized = 0;
+ }
+ up(&usbvision->lock);
+}
+
+static void usbvision_powerOffTimer(unsigned long data)
+{
+ struct usb_usbvision *usbvision = (void *) data;
+
+ PDEBUG(DBG_FUNC, "");
+ del_timer(&usbvision->powerOffTimer);
+ INIT_WORK(&usbvision->powerOffWork, call_usbvision_power_off);
+ (void) schedule_work(&usbvision->powerOffWork);
+
+}
+
+void usbvision_init_powerOffTimer(struct usb_usbvision *usbvision)
+{
+ init_timer(&usbvision->powerOffTimer);
+ usbvision->powerOffTimer.data = (long) usbvision;
+ usbvision->powerOffTimer.function = usbvision_powerOffTimer;
+}
+
+void usbvision_set_powerOffTimer(struct usb_usbvision *usbvision)
+{
+ mod_timer(&usbvision->powerOffTimer, jiffies + USBVISION_POWEROFF_TIME);
+}
+
+void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision)
+{
+ if (timer_pending(&usbvision->powerOffTimer)) {
+ del_timer(&usbvision->powerOffTimer);
+ }
+}
+
+/*
+ * usbvision_begin_streaming()
+ * Sure you have to put bit 7 to 0, if not incoming frames are droped, but no
+ * idea about the rest
+ */
+int usbvision_begin_streaming(struct usb_usbvision *usbvision)
+{
+ int errCode = 0;
+
+ if (usbvision->isocMode == ISOC_MODE_COMPRESS) {
+ usbvision_init_compression(usbvision);
+ }
+ errCode = usbvision_write_reg(usbvision, USBVISION_VIN_REG2, USBVISION_NOHVALID |
+ usbvision->Vin_Reg2_Preset);
+ return errCode;
+}
+
+/*
+ * usbvision_restart_isoc()
+ * Not sure yet if touching here PWR_REG make loose the config
+ */
+
+int usbvision_restart_isoc(struct usb_usbvision *usbvision)
+{
+ int ret;
+
+ if (
+ (ret =
+ usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+ USBVISION_SSPND_EN | USBVISION_PWR_VID)) < 0)
+ return ret;
+ if (
+ (ret =
+ usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+ USBVISION_SSPND_EN | USBVISION_PWR_VID |
+ USBVISION_RES2)) < 0)
+ return ret;
+ if (
+ (ret =
+ usbvision_write_reg(usbvision, USBVISION_VIN_REG2,
+ USBVISION_KEEP_BLANK | USBVISION_NOHVALID |
+ usbvision->Vin_Reg2_Preset)) < 0) return ret;
+
+ /* TODO: schedule timeout */
+ while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) && 0x01) != 1);
+
+ return 0;
+}
+
+int usbvision_audio_off(struct usb_usbvision *usbvision)
+{
+ if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, USBVISION_AUDIO_MUTE) < 0) {
+ printk(KERN_ERR "usbvision_audio_off: can't wirte reg\n");
+ return -1;
+ }
+ usbvision->AudioMute = 0;
+ usbvision->AudioChannel = USBVISION_AUDIO_MUTE;
+ return 0;
+}
+
+int usbvision_set_audio(struct usb_usbvision *usbvision, int AudioChannel)
+{
+ if (!usbvision->AudioMute) {
+ if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, AudioChannel) < 0) {
+ printk(KERN_ERR "usbvision_set_audio: can't write iopin register for audio switching\n");
+ return -1;
+ }
+ }
+ usbvision->AudioChannel = AudioChannel;
+ return 0;
+}
+
+int usbvision_setup(struct usb_usbvision *usbvision,int format)
+{
+ usbvision_set_video_format(usbvision, format);
+ usbvision_set_dram_settings(usbvision);
+ usbvision_set_compress_params(usbvision);
+ usbvision_set_input(usbvision);
+ usbvision_set_output(usbvision, MAX_USB_WIDTH, MAX_USB_HEIGHT);
+ usbvision_restart_isoc(usbvision);
+
+ /* cosas del PCM */
+ return USBVISION_IS_OPERATIONAL(usbvision);
+}
+
+
+int usbvision_sbuf_alloc(struct usb_usbvision *usbvision)
+{
+ int i, errCode = 0;
+ const int sb_size = USBVISION_URB_FRAMES * USBVISION_MAX_ISOC_PACKET_SIZE;
+
+ /* Clean pointers so we know if we allocated something */
+ for (i = 0; i < USBVISION_NUMSBUF; i++)
+ usbvision->sbuf[i].data = NULL;
+
+ for (i = 0; i < USBVISION_NUMSBUF; i++) {
+ usbvision->sbuf[i].data = kzalloc(sb_size, GFP_KERNEL);
+ if (usbvision->sbuf[i].data == NULL) {
+ err("%s: unable to allocate %d bytes for sbuf", __FUNCTION__, sb_size);
+ errCode = -ENOMEM;
+ break;
+ }
+ }
+ return errCode;
+}
+
+
+void usbvision_sbuf_free(struct usb_usbvision *usbvision)
+{
+ int i;
+
+ for (i = 0; i < USBVISION_NUMSBUF; i++) {
+ if (usbvision->sbuf[i].data != NULL) {
+ kfree(usbvision->sbuf[i].data);
+ usbvision->sbuf[i].data = NULL;
+ }
+ }
+}
+
+/*
+ * usbvision_init_isoc()
+ *
+ */
+int usbvision_init_isoc(struct usb_usbvision *usbvision)
+{
+ struct usb_device *dev = usbvision->dev;
+ int bufIdx, errCode, regValue;
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return -EFAULT;
+
+ usbvision->curFrame = NULL;
+ scratch_reset(usbvision);
+
+ /* Alternate interface 1 is is the biggest frame size */
+ errCode = usb_set_interface(dev, usbvision->iface, usbvision->ifaceAltActive);
+ if (errCode < 0) {
+ usbvision->last_error = errCode;
+ return -EBUSY;
+ }
+
+ regValue = (16 - usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F;
+ usbvision->isocPacketSize = (regValue == 0) ? 0 : (regValue * 64) - 1;
+ PDEBUG(DBG_ISOC, "ISO Packet Length:%d", usbvision->isocPacketSize);
+
+ usbvision->usb_bandwidth = regValue >> 1;
+ PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec", usbvision->usb_bandwidth);
+
+
+
+ /* We double buffer the Iso lists */
+
+ for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
+ int j, k;
+ struct urb *urb;
+
+ urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
+ if (urb == NULL) {
+ err("%s: usb_alloc_urb() failed", __FUNCTION__);
+ return -ENOMEM;
+ }
+ usbvision->sbuf[bufIdx].urb = urb;
+ urb->dev = dev;
+ urb->context = usbvision;
+ urb->pipe = usb_rcvisocpipe(dev, usbvision->video_endp);
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->interval = 1;
+ urb->transfer_buffer = usbvision->sbuf[bufIdx].data;
+ urb->complete = usbvision_isocIrq;
+ urb->number_of_packets = USBVISION_URB_FRAMES;
+ urb->transfer_buffer_length =
+ usbvision->isocPacketSize * USBVISION_URB_FRAMES;
+ for (j = k = 0; j < USBVISION_URB_FRAMES; j++,
+ k += usbvision->isocPacketSize) {
+ urb->iso_frame_desc[j].offset = k;
+ urb->iso_frame_desc[j].length = usbvision->isocPacketSize;
+ }
+ }
+
+
+ /* Submit all URBs */
+ for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
+ errCode = usb_submit_urb(usbvision->sbuf[bufIdx].urb, GFP_KERNEL);
+ if (errCode) {
+ err("%s: usb_submit_urb(%d) failed: error %d", __FUNCTION__, bufIdx, errCode);
+ }
+ }
+
+ usbvision->streaming = Stream_Idle;
+ PDEBUG(DBG_ISOC, "%s: streaming=1 usbvision->video_endp=$%02x", __FUNCTION__, usbvision->video_endp);
+ return 0;
+}
+
+/*
+ * usbvision_stop_isoc()
+ *
+ * This procedure stops streaming and deallocates URBs. Then it
+ * activates zero-bandwidth alt. setting of the video interface.
+ *
+ */
+void usbvision_stop_isoc(struct usb_usbvision *usbvision)
+{
+ int bufIdx, errCode, regValue;
+
+ if ((usbvision->streaming == Stream_Off) || (usbvision->dev == NULL))
+ return;
+
+ /* Unschedule all of the iso td's */
+ for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
+ usb_kill_urb(usbvision->sbuf[bufIdx].urb);
+ usb_free_urb(usbvision->sbuf[bufIdx].urb);
+ usbvision->sbuf[bufIdx].urb = NULL;
+ }
+
+
+ PDEBUG(DBG_ISOC, "%s: streaming=Stream_Off\n", __FUNCTION__);
+ usbvision->streaming = Stream_Off;
+
+ if (!usbvision->remove_pending) {
+
+ /* Set packet size to 0 */
+ errCode = usb_set_interface(usbvision->dev, usbvision->iface,
+ usbvision->ifaceAltInactive);
+ if (errCode < 0) {
+ err("%s: usb_set_interface() failed: error %d", __FUNCTION__, errCode);
+ usbvision->last_error = errCode;
+ }
+ regValue = (16 - usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F;
+ usbvision->isocPacketSize = (regValue == 0) ? 0 : (regValue * 64) - 1;
+ PDEBUG(DBG_ISOC, "ISO Packet Length:%d", usbvision->isocPacketSize);
+
+ usbvision->usb_bandwidth = regValue >> 1;
+ PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec", usbvision->usb_bandwidth);
+ }
+}
+
+int usbvision_muxsel(struct usb_usbvision *usbvision, int channel)
+{
+ int mode[4];
+ int audio[]= {1, 0, 0, 0};
+ struct v4l2_routing route;
+ //channel 0 is TV with audiochannel 1 (tuner mono)
+ //channel 1 is Composite with audio channel 0 (line in)
+ //channel 2 is S-Video with audio channel 0 (line in)
+ //channel 3 is additional video inputs to the device with audio channel 0 (line in)
+
+ RESTRICT_TO_RANGE(channel, 0, usbvision->video_inputs);
+ usbvision->ctl_input = channel;
+ route.input = SAA7115_COMPOSITE1;
+ call_i2c_clients(usbvision, VIDIOC_INT_S_VIDEO_ROUTING,&route);
+ call_i2c_clients(usbvision, VIDIOC_S_INPUT, &usbvision->ctl_input);
+
+ // set the new channel
+ // Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video
+ // Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red
+
+ switch (usbvision_device_data[usbvision->DevModel].Codec) {
+ case CODEC_SAA7113:
+ if (SwitchSVideoInput) { // To handle problems with S-Video Input for some devices. Use SwitchSVideoInput parameter when loading the module.
+ mode[2] = 1;
+ }
+ else {
+ mode[2] = 7;
+ }
+ if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+ mode[0] = 0; mode[1] = 2; mode[3] = 3; // Special for four input devices
+ }
+ else {
+ mode[0] = 0; mode[1] = 2; //modes for regular saa7113 devices
+ }
+ break;
+ case CODEC_SAA7111:
+ mode[0] = 0; mode[1] = 1; mode[2] = 7; //modes for saa7111
+ break;
+ default:
+ mode[0] = 0; mode[1] = 1; mode[2] = 7; //default modes
+ }
+ route.input = mode[channel];
+ call_i2c_clients(usbvision, VIDIOC_INT_S_VIDEO_ROUTING,&route);
+ usbvision->channel = channel;
+ usbvision_set_audio(usbvision, audio[channel]);
+ return 0;
+}
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
--- /dev/null
+/*
+ * I2C_ALGO_USB.C
+ * i2c algorithm for USB-I2C Bridges
+ *
+ * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
+ * Dwaine Garden <dwainegarden@rogers.com>
+ *
+ * This module is part of usbvision driver project.
+ * Updates to driver completed by Dwaine P. Garden
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <linux/utsname.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include "usbvision.h"
+
+#define DBG_I2C 1<<0
+#define DBG_ALGO 1<<1
+
+static int i2c_debug = 0;
+
+module_param (i2c_debug, int, 0644); // debug_i2c_usb mode of the device driver
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+#define PDEBUG(level, fmt, args...) \
+ if (i2c_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args)
+
+static int usbvision_i2c_write(void *data, unsigned char addr, char *buf,
+ short len);
+static int usbvision_i2c_read(void *data, unsigned char addr, char *buf,
+ short len);
+
+static inline int try_write_address(struct i2c_adapter *i2c_adap,
+ unsigned char addr, int retries)
+{
+ struct i2c_algo_usb_data *adap = i2c_adap->algo_data;
+ void *data;
+ int i, ret = -1;
+ char buf[4];
+
+ data = i2c_get_adapdata(i2c_adap);
+ buf[0] = 0x00;
+ for (i = 0; i <= retries; i++) {
+ ret = (usbvision_i2c_write(data, addr, buf, 1));
+ if (ret == 1)
+ break; /* success! */
+ udelay(5 /*adap->udelay */ );
+ if (i == retries) /* no success */
+ break;
+ udelay(adap->udelay);
+ }
+ if (i) {
+ PDEBUG(DBG_ALGO,"Needed %d retries for address %#2x", i, addr);
+ PDEBUG(DBG_ALGO,"Maybe there's no device at this address");
+ }
+ return ret;
+}
+
+static inline int try_read_address(struct i2c_adapter *i2c_adap,
+ unsigned char addr, int retries)
+{
+ struct i2c_algo_usb_data *adap = i2c_adap->algo_data;
+ void *data;
+ int i, ret = -1;
+ char buf[4];
+
+ data = i2c_get_adapdata(i2c_adap);
+ for (i = 0; i <= retries; i++) {
+ ret = (usbvision_i2c_read(data, addr, buf, 1));
+ if (ret == 1)
+ break; /* success! */
+ udelay(5 /*adap->udelay */ );
+ if (i == retries) /* no success */
+ break;
+ udelay(adap->udelay);
+ }
+ if (i) {
+ PDEBUG(DBG_ALGO,"Needed %d retries for address %#2x", i, addr);
+ PDEBUG(DBG_ALGO,"Maybe there's no device at this address");
+ }
+ return ret;
+}
+
+static inline int usb_find_address(struct i2c_adapter *i2c_adap,
+ struct i2c_msg *msg, int retries,
+ unsigned char *add)
+{
+ unsigned short flags = msg->flags;
+
+ unsigned char addr;
+ int ret;
+ if ((flags & I2C_M_TEN)) {
+ /* a ten bit address */
+ addr = 0xf0 | ((msg->addr >> 7) & 0x03);
+ /* try extended address code... */
+ ret = try_write_address(i2c_adap, addr, retries);
+ if (ret != 1) {
+ err("died at extended address code, while writing");
+ return -EREMOTEIO;
+ }
+ add[0] = addr;
+ if (flags & I2C_M_RD) {
+ /* okay, now switch into reading mode */
+ addr |= 0x01;
+ ret = try_read_address(i2c_adap, addr, retries);
+ if (ret != 1) {
+ err("died at extended address code, while reading");
+ return -EREMOTEIO;
+ }
+ }
+
+ } else { /* normal 7bit address */
+ addr = (msg->addr << 1);
+ if (flags & I2C_M_RD)
+ addr |= 1;
+ if (flags & I2C_M_REV_DIR_ADDR)
+ addr ^= 1;
+
+ add[0] = addr;
+ if (flags & I2C_M_RD)
+ ret = try_read_address(i2c_adap, addr, retries);
+ else
+ ret = try_write_address(i2c_adap, addr, retries);
+
+ if (ret != 1) {
+ return -EREMOTEIO;
+ }
+ }
+ return 0;
+}
+
+static int
+usb_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+{
+ struct i2c_msg *pmsg;
+ void *data;
+ int i, ret;
+ unsigned char addr;
+
+ data = i2c_get_adapdata(i2c_adap);
+
+ for (i = 0; i < num; i++) {
+ pmsg = &msgs[i];
+ ret = usb_find_address(i2c_adap, pmsg, i2c_adap->retries, &addr);
+ if (ret != 0) {
+ PDEBUG(DBG_ALGO,"got NAK from device, message #%d", i);
+ return (ret < 0) ? ret : -EREMOTEIO;
+ }
+
+ if (pmsg->flags & I2C_M_RD) {
+ /* read bytes into buffer */
+ ret = (usbvision_i2c_read(data, addr, pmsg->buf, pmsg->len));
+ if (ret < pmsg->len) {
+ return (ret < 0) ? ret : -EREMOTEIO;
+ }
+ } else {
+ /* write bytes from buffer */
+ ret = (usbvision_i2c_write(data, addr, pmsg->buf, pmsg->len));
+ if (ret < pmsg->len) {
+ return (ret < 0) ? ret : -EREMOTEIO;
+ }
+ }
+ }
+ return num;
+}
+
+static int algo_control(struct i2c_adapter *adapter, unsigned int cmd, unsigned long arg)
+{
+ return 0;
+}
+
+static u32 usb_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
+}
+
+
+/* -----exported algorithm data: ------------------------------------- */
+
+static struct i2c_algorithm i2c_usb_algo = {
+ .master_xfer = usb_xfer,
+ .smbus_xfer = NULL,
+ .algo_control = algo_control,
+ .functionality = usb_func,
+};
+
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+int usbvision_i2c_usb_add_bus(struct i2c_adapter *adap)
+{
+ PDEBUG(DBG_I2C, "I2C debugging is enabled [i2c]");
+ PDEBUG(DBG_ALGO, "ALGO debugging is enabled [i2c]");
+
+ /* register new adapter to i2c module... */
+
+ adap->algo = &i2c_usb_algo;
+
+ adap->timeout = 100; /* default values, should */
+ adap->retries = 3; /* be replaced by defines */
+
+ i2c_add_adapter(adap);
+
+ PDEBUG(DBG_ALGO,"i2c bus for %s registered", adap->name);
+
+ return 0;
+}
+
+
+int usbvision_i2c_usb_del_bus(struct i2c_adapter *adap)
+{
+
+ i2c_del_adapter(adap);
+
+ PDEBUG(DBG_ALGO,"i2c bus for %s unregistered", adap->name);
+
+ return 0;
+}
+
+
+/* ----------------------------------------------------------------------- */
+/* usbvision specific I2C functions */
+/* ----------------------------------------------------------------------- */
+static struct i2c_adapter i2c_adap_template;
+static struct i2c_algo_usb_data i2c_algo_template;
+static struct i2c_client i2c_client_template;
+
+int usbvision_init_i2c(struct usb_usbvision *usbvision)
+{
+ memcpy(&usbvision->i2c_adap, &i2c_adap_template,
+ sizeof(struct i2c_adapter));
+ memcpy(&usbvision->i2c_algo, &i2c_algo_template,
+ sizeof(struct i2c_algo_usb_data));
+ memcpy(&usbvision->i2c_client, &i2c_client_template,
+ sizeof(struct i2c_client));
+
+ sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name),
+ " #%d", usbvision->vdev->minor & 0x1f);
+ PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name);
+
+ i2c_set_adapdata(&usbvision->i2c_adap, usbvision);
+ i2c_set_clientdata(&usbvision->i2c_client, usbvision);
+ i2c_set_algo_usb_data(&usbvision->i2c_algo, usbvision);
+
+ usbvision->i2c_adap.algo_data = &usbvision->i2c_algo;
+ usbvision->i2c_client.adapter = &usbvision->i2c_adap;
+
+ if (usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_IIC_LRNACK) < 0) {
+ printk(KERN_ERR "usbvision_init_i2c: can't write reg\n");
+ return -EBUSY;
+ }
+
+#ifdef CONFIG_MODULES
+ /* Request the load of the i2c modules we need */
+ switch (usbvision_device_data[usbvision->DevModel].Codec) {
+ case CODEC_SAA7113:
+ request_module("saa7115");
+ break;
+ case CODEC_SAA7111:
+ request_module("saa7115");
+ break;
+ }
+ if (usbvision_device_data[usbvision->DevModel].Tuner == 1) {
+ request_module("tuner");
+ }
+#endif
+
+ return usbvision_i2c_usb_add_bus(&usbvision->i2c_adap);
+}
+
+void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd,
+ void *arg)
+{
+ BUG_ON(NULL == usbvision->i2c_adap.algo_data);
+ i2c_clients_command(&usbvision->i2c_adap, cmd, arg);
+}
+
+static int attach_inform(struct i2c_client *client)
+{
+ struct usb_usbvision *usbvision;
+
+ usbvision = (struct usb_usbvision *)i2c_get_adapdata(client->adapter);
+
+ switch (client->addr << 1) {
+ case 0x43:
+ case 0x4b:
+ {
+ struct tuner_setup tun_setup;
+
+ tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
+ tun_setup.type = TUNER_TDA9887;
+ tun_setup.addr = client->addr;
+
+ call_i2c_clients(usbvision, TUNER_SET_TYPE_ADDR, &tun_setup);
+
+ break;
+ }
+ case 0x42:
+ PDEBUG(DBG_I2C,"attach_inform: saa7114 detected.");
+ break;
+ case 0x4a:
+ PDEBUG(DBG_I2C,"attach_inform: saa7113 detected.");
+ break;
+ case 0xa0:
+ PDEBUG(DBG_I2C,"attach_inform: eeprom detected.");
+ break;
+
+ default:
+ {
+ struct tuner_setup tun_setup;
+
+ PDEBUG(DBG_I2C,"attach inform: detected I2C address %x", client->addr << 1);
+ usbvision->tuner_addr = client->addr;
+
+ if ((usbvision->have_tuner) && (usbvision->tuner_type != -1)) {
+ tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
+ tun_setup.type = usbvision->tuner_type;
+ tun_setup.addr = usbvision->tuner_addr;
+ call_i2c_clients(usbvision, TUNER_SET_TYPE_ADDR, &tun_setup);
+ }
+ }
+ break;
+ }
+ return 0;
+}
+
+static int detach_inform(struct i2c_client *client)
+{
+ struct usb_usbvision *usbvision;
+
+ usbvision = (struct usb_usbvision *)i2c_get_adapdata(client->adapter);
+
+ PDEBUG(DBG_I2C,"usbvision[%d] detaches %s", usbvision->nr, client->name);
+ return 0;
+}
+
+static int
+usbvision_i2c_read_max4(struct usb_usbvision *usbvision, unsigned char addr,
+ char *buf, short len)
+{
+ int rc, retries;
+
+ for (retries = 5;;) {
+ rc = usbvision_write_reg(usbvision, USBVISION_SER_ADRS, addr);
+ if (rc < 0)
+ return rc;
+
+ /* Initiate byte read cycle */
+ /* USBVISION_SER_CONT <- d0-d2 n. of bytes to r/w */
+ /* d3 0=Wr 1=Rd */
+ rc = usbvision_write_reg(usbvision, USBVISION_SER_CONT,
+ (len & 0x07) | 0x18);
+ if (rc < 0)
+ return rc;
+
+ /* Test for Busy and ACK */
+ do {
+ /* USBVISION_SER_CONT -> d4 == 0 busy */
+ rc = usbvision_read_reg(usbvision, USBVISION_SER_CONT);
+ } while (rc > 0 && ((rc & 0x10) != 0)); /* Retry while busy */
+ if (rc < 0)
+ return rc;
+
+ /* USBVISION_SER_CONT -> d5 == 1 Not ack */
+ if ((rc & 0x20) == 0) /* Ack? */
+ break;
+
+ /* I2C abort */
+ rc = usbvision_write_reg(usbvision, USBVISION_SER_CONT, 0x00);
+ if (rc < 0)
+ return rc;
+
+ if (--retries < 0)
+ return -1;
+ }
+
+ switch (len) {
+ case 4:
+ buf[3] = usbvision_read_reg(usbvision, USBVISION_SER_DAT4);
+ case 3:
+ buf[2] = usbvision_read_reg(usbvision, USBVISION_SER_DAT3);
+ case 2:
+ buf[1] = usbvision_read_reg(usbvision, USBVISION_SER_DAT2);
+ case 1:
+ buf[0] = usbvision_read_reg(usbvision, USBVISION_SER_DAT1);
+ break;
+ default:
+ printk(KERN_ERR
+ "usbvision_i2c_read_max4: buffer length > 4\n");
+ }
+
+ if (i2c_debug & DBG_I2C) {
+ int idx;
+ for (idx = 0; idx < len; idx++) {
+ PDEBUG(DBG_I2C,"read %x from address %x", (unsigned char)buf[idx], addr);
+ }
+ }
+ return len;
+}
+
+
+static int usbvision_i2c_write_max4(struct usb_usbvision *usbvision,
+ unsigned char addr, const char *buf,
+ short len)
+{
+ int rc, retries;
+ int i;
+ unsigned char value[6];
+ unsigned char ser_cont;
+
+ ser_cont = (len & 0x07) | 0x10;
+
+ value[0] = addr;
+ value[1] = ser_cont;
+ for (i = 0; i < len; i++)
+ value[i + 2] = buf[i];
+
+ for (retries = 5;;) {
+ rc = usb_control_msg(usbvision->dev,
+ usb_sndctrlpipe(usbvision->dev, 1),
+ USBVISION_OP_CODE,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_ENDPOINT, 0,
+ (__u16) USBVISION_SER_ADRS, value,
+ len + 2, HZ);
+
+ if (rc < 0)
+ return rc;
+
+ rc = usbvision_write_reg(usbvision, USBVISION_SER_CONT,
+ (len & 0x07) | 0x10);
+ if (rc < 0)
+ return rc;
+
+ /* Test for Busy and ACK */
+ do {
+ rc = usbvision_read_reg(usbvision, USBVISION_SER_CONT);
+ } while (rc > 0 && ((rc & 0x10) != 0)); /* Retry while busy */
+ if (rc < 0)
+ return rc;
+
+ if ((rc & 0x20) == 0) /* Ack? */
+ break;
+
+ /* I2C abort */
+ usbvision_write_reg(usbvision, USBVISION_SER_CONT, 0x00);
+
+ if (--retries < 0)
+ return -1;
+
+ }
+
+ if (i2c_debug & DBG_I2C) {
+ int idx;
+ for (idx = 0; idx < len; idx++) {
+ PDEBUG(DBG_I2C,"wrote %x at address %x", (unsigned char)buf[idx], addr);
+ }
+ }
+ return len;
+}
+
+static int usbvision_i2c_write(void *data, unsigned char addr, char *buf,
+ short len)
+{
+ char *bufPtr = buf;
+ int retval;
+ int wrcount = 0;
+ int count;
+ int maxLen = 4;
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) data;
+
+ while (len > 0) {
+ count = (len > maxLen) ? maxLen : len;
+ retval = usbvision_i2c_write_max4(usbvision, addr, bufPtr, count);
+ if (retval > 0) {
+ len -= count;
+ bufPtr += count;
+ wrcount += count;
+ } else
+ return (retval < 0) ? retval : -EFAULT;
+ }
+ return wrcount;
+}
+
+static int usbvision_i2c_read(void *data, unsigned char addr, char *buf,
+ short len)
+{
+ char temp[4];
+ int retval, i;
+ int rdcount = 0;
+ int count;
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) data;
+
+ while (len > 0) {
+ count = (len > 3) ? 4 : len;
+ retval = usbvision_i2c_read_max4(usbvision, addr, temp, count);
+ if (retval > 0) {
+ for (i = 0; i < len; i++)
+ buf[rdcount + i] = temp[i];
+ len -= count;
+ rdcount += count;
+ } else
+ return (retval < 0) ? retval : -EFAULT;
+ }
+ return rdcount;
+}
+
+static struct i2c_algo_usb_data i2c_algo_template = {
+ .data = NULL,
+ .inb = usbvision_i2c_read,
+ .outb = usbvision_i2c_write,
+ .udelay = 10,
+ .mdelay = 10,
+ .timeout = 100,
+};
+
+static struct i2c_adapter i2c_adap_template = {
+ .owner = THIS_MODULE,
+ .name = "usbvision",
+ .id = I2C_HW_B_BT848, /* FIXME */
+ .algo = NULL,
+ .algo_data = NULL,
+ .client_register = attach_inform,
+ .client_unregister = detach_inform,
+#ifdef I2C_ADAP_CLASS_TV_ANALOG
+ .class = I2C_ADAP_CLASS_TV_ANALOG,
+#else
+ .class = I2C_CLASS_TV_ANALOG,
+#endif
+};
+
+static struct i2c_client i2c_client_template = {
+ .name = "usbvision internal",
+};
+
+EXPORT_SYMBOL(usbvision_i2c_usb_add_bus);
+EXPORT_SYMBOL(usbvision_i2c_usb_del_bus);
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
--- /dev/null
+/*
+ * USB USBVISION Video device driver 0.9.9
+ *
+ *
+ *
+ * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
+ *
+ * This module is part of usbvision driver project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Let's call the version 0.... until compression decoding is completely
+ * implemented.
+ *
+ * This driver is written by Jose Ignacio Gijon and Joerg Heckenbach.
+ * It was based on USB CPiA driver written by Peter Pregler,
+ * Scott J. Bertin and Johannes Erdfelt
+ * Ideas are taken from bttv driver by Ralph Metzler, Marcus Metzler &
+ * Gerd Knorr and zoran 36120/36125 driver by Pauline Middelink
+ * Updates to driver completed by Dwaine P. Garden
+ *
+ *
+ * TODO:
+ * - use submit_urb for all setup packets
+ * - Fix memory settings for nt1004. It is 4 times as big as the
+ * nt1003 memory.
+ * - Add audio on endpoint 3 for nt1004 chip. Seems impossible, needs a codec interface. Which one?
+ * - Clean up the driver.
+ * - optimization for performance.
+ * - Add Videotext capability (VBI). Working on it.....
+ * - Check audio for other devices
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/utsname.h>
+#include <linux/highmem.h>
+#include <linux/smp_lock.h>
+#include <linux/videodev.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/videodev2.h>
+#include <linux/video_decoder.h>
+#include <linux/i2c.h>
+
+#include <media/saa7115.h>
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include <media/audiochip.h>
+
+#include <linux/moduleparam.h>
+#include <linux/workqueue.h>
+
+#ifdef CONFIG_KMOD
+#include <linux/kmod.h>
+#endif
+
+#include "usbvision.h"
+
+#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>, Dwaine Garden <DwaineGarden@rogers.com>"
+#define DRIVER_NAME "usbvision"
+#define DRIVER_ALIAS "USBVision"
+#define DRIVER_DESC "USBVision USB Video Device Driver for Linux"
+#define DRIVER_LICENSE "GPL"
+#define USBVISION_DRIVER_VERSION_MAJOR 0
+#define USBVISION_DRIVER_VERSION_MINOR 9
+#define USBVISION_DRIVER_VERSION_PATCHLEVEL 9
+#define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,USBVISION_DRIVER_VERSION_MINOR,USBVISION_DRIVER_VERSION_PATCHLEVEL)
+#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR) "." __stringify(USBVISION_DRIVER_VERSION_MINOR) "." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL)
+
+#define ENABLE_HEXDUMP 0 /* Enable if you need it */
+
+
+#ifdef USBVISION_DEBUG
+ #define PDEBUG(level, fmt, args...) \
+ if (video_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args)
+#else
+ #define PDEBUG(level, fmt, args...) do {} while(0)
+#endif
+
+#define DBG_IOCTL 1<<0
+#define DBG_IO 1<<1
+#define DBG_PROBE 1<<2
+#define DBG_MMAP 1<<3
+
+//String operations
+#define rmspace(str) while(*str==' ') str++;
+#define goto2next(str) while(*str!=' ') str++; while(*str==' ') str++;
+
+
+static int usbvision_nr = 0; // sequential number of usbvision device
+
+static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
+ { 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" },
+ { 1, 2, 16, V4L2_PIX_FMT_RGB565 , "RGB565" },
+ { 1, 3, 24, V4L2_PIX_FMT_RGB24 , "RGB24" },
+ { 1, 4, 32, V4L2_PIX_FMT_RGB32 , "RGB32" },
+ { 1, 2, 16, V4L2_PIX_FMT_RGB555 , "RGB555" },
+ { 1, 2, 16, V4L2_PIX_FMT_YUYV , "YUV422" },
+ { 1, 2, 12, V4L2_PIX_FMT_YVU420 , "YUV420P" }, // 1.5 !
+ { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
+};
+
+/* supported tv norms */
+static struct usbvision_tvnorm tvnorms[] = {
+ {
+ .name = "PAL",
+ .id = V4L2_STD_PAL,
+ }, {
+ .name = "NTSC",
+ .id = V4L2_STD_NTSC,
+ }, {
+ .name = "SECAM",
+ .id = V4L2_STD_SECAM,
+ }, {
+ .name = "PAL-M",
+ .id = V4L2_STD_PAL_M,
+ }
+};
+
+#define TVNORMS ARRAY_SIZE(tvnorms)
+
+// Function prototypes
+static void usbvision_release(struct usb_usbvision *usbvision);
+
+// Default initalization of device driver parameters
+static int isocMode = ISOC_MODE_COMPRESS; // Set the default format for ISOC endpoint
+static int video_debug = 0; // Set the default Debug Mode of the device driver
+static int PowerOnAtOpen = 1; // Set the default device to power on at startup
+static int video_nr = -1; // Sequential Number of Video Device
+static int radio_nr = -1; // Sequential Number of Radio Device
+static int vbi_nr = -1; // Sequential Number of VBI Device
+static char *CustomDevice=NULL; // Set as nothing....
+
+// Grab parameters for the device driver
+
+#if defined(module_param) // Showing parameters under SYSFS
+module_param(isocMode, int, 0444);
+module_param(video_debug, int, 0444);
+module_param(PowerOnAtOpen, int, 0444);
+module_param(video_nr, int, 0444);
+module_param(radio_nr, int, 0444);
+module_param(vbi_nr, int, 0444);
+module_param(CustomDevice, charp, 0444);
+#else // Old Style
+MODULE_PARAM(isocMode, "i");
+MODULE_PARM(video_debug, "i"); // Grab the Debug Mode of the device driver
+MODULE_PARM(adjustCompression, "i"); // Grab the compression to be adaptive
+MODULE_PARM(PowerOnAtOpen, "i"); // Grab the device to power on at startup
+MODULE_PARM(SwitchSVideoInput, "i"); // To help people with Black and White output with using s-video input. Some cables and input device are wired differently.
+MODULE_PARM(video_nr, "i"); // video_nr option allows to specify a certain /dev/videoX device (like /dev/video0 or /dev/video1 ...)
+MODULE_PARM(radio_nr, "i"); // radio_nr option allows to specify a certain /dev/radioX device (like /dev/radio0 or /dev/radio1 ...)
+MODULE_PARM(vbi_nr, "i"); // vbi_nr option allows to specify a certain /dev/vbiX device (like /dev/vbi0 or /dev/vbi1 ...)
+MODULE_PARM(CustomDevice, "s"); // .... CustomDevice
+#endif
+
+MODULE_PARM_DESC(isocMode, " Set the default format for ISOC endpoint. Default: 0x60 (Compression On)");
+MODULE_PARM_DESC(video_debug, " Set the default Debug Mode of the device driver. Default: 0 (Off)");
+MODULE_PARM_DESC(PowerOnAtOpen, " Set the default device to power on when device is opened. Default: 1 (On)");
+MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX). Default: -1 (autodetect)");
+MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)");
+MODULE_PARM_DESC(vbi_nr, "Set vbi device number (/dev/vbiX). Default: -1 (autodetect)");
+MODULE_PARM_DESC(CustomDevice, " Define the fine tuning parameters for the device. Default: null");
+
+
+// Misc stuff
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+MODULE_VERSION(USBVISION_VERSION_STRING);
+MODULE_ALIAS(DRIVER_ALIAS);
+
+
+/****************************************************************************************/
+/* SYSFS Code - Copied from the stv680.c usb module. */
+/* Device information is located at /sys/class/video4linux/video0 */
+/* Device parameters information is located at /sys/module/usbvision */
+/* Device USB Information is located at /sys/bus/usb/drivers/USBVision Video Grabber */
+/****************************************************************************************/
+
+
+#define YES_NO(x) ((x) ? "Yes" : "No")
+
+static inline struct usb_usbvision *cd_to_usbvision(struct class_device *cd)
+{
+ struct video_device *vdev = to_video_device(cd);
+ return video_get_drvdata(vdev);
+}
+
+static ssize_t show_version(struct class_device *cd, char *buf)
+{
+ return sprintf(buf, "%s\n", USBVISION_VERSION_STRING);
+}
+static CLASS_DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
+
+static ssize_t show_model(struct class_device *class_dev, char *buf)
+{
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ return sprintf(buf, "%s\n", usbvision_device_data[usbvision->DevModel].ModelString);
+}
+static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
+
+static ssize_t show_hue(struct class_device *class_dev, char *buf)
+{
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct v4l2_control ctrl;
+ ctrl.id = V4L2_CID_HUE;
+ ctrl.value = 0;
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
+ return sprintf(buf, "%d\n", ctrl.value >> 8);
+}
+static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
+
+static ssize_t show_contrast(struct class_device *class_dev, char *buf)
+{
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct v4l2_control ctrl;
+ ctrl.id = V4L2_CID_CONTRAST;
+ ctrl.value = 0;
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
+ return sprintf(buf, "%d\n", ctrl.value >> 8);
+}
+static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
+
+static ssize_t show_brightness(struct class_device *class_dev, char *buf)
+{
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct v4l2_control ctrl;
+ ctrl.id = V4L2_CID_BRIGHTNESS;
+ ctrl.value = 0;
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
+ return sprintf(buf, "%d\n", ctrl.value >> 8);
+}
+static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
+
+static ssize_t show_saturation(struct class_device *class_dev, char *buf)
+{
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ struct v4l2_control ctrl;
+ ctrl.id = V4L2_CID_SATURATION;
+ ctrl.value = 0;
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl);
+ return sprintf(buf, "%d\n", ctrl.value >> 8);
+}
+static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
+
+static ssize_t show_streaming(struct class_device *class_dev, char *buf)
+{
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ return sprintf(buf, "%s\n", YES_NO(usbvision->streaming==Stream_On?1:0));
+}
+static CLASS_DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
+
+static ssize_t show_compression(struct class_device *class_dev, char *buf)
+{
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ return sprintf(buf, "%s\n", YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
+}
+static CLASS_DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
+
+static ssize_t show_device_bridge(struct class_device *class_dev, char *buf)
+{
+ struct video_device *vdev = to_video_device(class_dev);
+ struct usb_usbvision *usbvision = video_get_drvdata(vdev);
+ return sprintf(buf, "%d\n", usbvision->bridgeType);
+}
+static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
+
+static void usbvision_create_sysfs(struct video_device *vdev)
+{
+ int res;
+ if (vdev) {
+ res=video_device_create_file(vdev, &class_device_attr_version);
+ res=video_device_create_file(vdev, &class_device_attr_model);
+ res=video_device_create_file(vdev, &class_device_attr_hue);
+ res=video_device_create_file(vdev, &class_device_attr_contrast);
+ res=video_device_create_file(vdev, &class_device_attr_brightness);
+ res=video_device_create_file(vdev, &class_device_attr_saturation);
+ res=video_device_create_file(vdev, &class_device_attr_streaming);
+ res=video_device_create_file(vdev, &class_device_attr_compression);
+ res=video_device_create_file(vdev, &class_device_attr_bridge);
+ }
+}
+
+static void usbvision_remove_sysfs(struct video_device *vdev)
+{
+ if (vdev) {
+ video_device_remove_file(vdev, &class_device_attr_version);
+ video_device_remove_file(vdev, &class_device_attr_model);
+ video_device_remove_file(vdev, &class_device_attr_hue);
+ video_device_remove_file(vdev, &class_device_attr_contrast);
+ video_device_remove_file(vdev, &class_device_attr_brightness);
+ video_device_remove_file(vdev, &class_device_attr_saturation);
+ video_device_remove_file(vdev, &class_device_attr_streaming);
+ video_device_remove_file(vdev, &class_device_attr_compression);
+ video_device_remove_file(vdev, &class_device_attr_bridge);
+ }
+}
+
+
+/*
+ * usbvision_open()
+ *
+ * This is part of Video 4 Linux API. The driver can be opened by one
+ * client only (checks internal counter 'usbvision->user'). The procedure
+ * then allocates buffers needed for video processing.
+ *
+ */
+static int usbvision_v4l2_open(struct inode *inode, struct file *file)
+{
+ struct video_device *dev = video_devdata(file);
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
+ int errCode = 0;
+
+ PDEBUG(DBG_IO, "open");
+
+
+ usbvision_reset_powerOffTimer(usbvision);
+
+ if (usbvision->user)
+ errCode = -EBUSY;
+ else {
+ /* Allocate memory for the frame buffers */
+ errCode = usbvision_frames_alloc(usbvision);
+ if(!errCode) {
+ /* Allocate memory for the scratch ring buffer */
+ errCode = usbvision_scratch_alloc(usbvision);
+ if(!errCode) {
+ /* Allocate memory for the USB S buffers */
+ errCode = usbvision_sbuf_alloc(usbvision);
+ if ((!errCode) && (usbvision->isocMode==ISOC_MODE_COMPRESS)) {
+ /* Allocate intermediate decompression buffers only if needed */
+ errCode = usbvision_decompress_alloc(usbvision);
+ }
+ }
+ }
+ if (errCode) {
+ /* Deallocate all buffers if trouble */
+ usbvision_frames_free(usbvision);
+ usbvision_scratch_free(usbvision);
+ usbvision_sbuf_free(usbvision);
+ usbvision_decompress_free(usbvision);
+ }
+ }
+
+ /* If so far no errors then we shall start the camera */
+ if (!errCode) {
+ down(&usbvision->lock);
+ if (usbvision->power == 0) {
+ usbvision_power_on(usbvision);
+ usbvision_init_i2c(usbvision);
+ }
+
+ /* Send init sequence only once, it's large! */
+ if (!usbvision->initialized) {
+ int setup_ok = 0;
+ setup_ok = usbvision_setup(usbvision,isocMode);
+ if (setup_ok)
+ usbvision->initialized = 1;
+ else
+ errCode = -EBUSY;
+ }
+
+ if (!errCode) {
+ usbvision_begin_streaming(usbvision);
+ errCode = usbvision_init_isoc(usbvision);
+ /* device needs to be initialized before isoc transfer */
+ usbvision_muxsel(usbvision,0);
+ usbvision->user++;
+ }
+ else {
+ if (PowerOnAtOpen) {
+ usbvision_i2c_usb_del_bus(&usbvision->i2c_adap);
+ usbvision_power_off(usbvision);
+ usbvision->initialized = 0;
+ }
+ }
+ up(&usbvision->lock);
+ }
+
+ if (errCode) {
+ }
+
+ /* prepare queues */
+ usbvision_empty_framequeues(usbvision);
+
+ PDEBUG(DBG_IO, "success");
+ return errCode;
+}
+
+/*
+ * usbvision_v4l2_close()
+ *
+ * This is part of Video 4 Linux API. The procedure
+ * stops streaming and deallocates all buffers that were earlier
+ * allocated in usbvision_v4l2_open().
+ *
+ */
+static int usbvision_v4l2_close(struct inode *inode, struct file *file)
+{
+ struct video_device *dev = video_devdata(file);
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
+
+ PDEBUG(DBG_IO, "close");
+ down(&usbvision->lock);
+
+ usbvision_audio_off(usbvision);
+ usbvision_restart_isoc(usbvision);
+ usbvision_stop_isoc(usbvision);
+
+ usbvision_decompress_free(usbvision);
+ usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size);
+ usbvision_scratch_free(usbvision);
+ usbvision_sbuf_free(usbvision);
+
+ usbvision->user--;
+
+ if (PowerOnAtOpen) {
+ /* power off in a little while to avoid off/on every close/open short sequences */
+ usbvision_set_powerOffTimer(usbvision);
+ usbvision->initialized = 0;
+ }
+
+ up(&usbvision->lock);
+
+ if (usbvision->remove_pending) {
+ info("%s: Final disconnect", __FUNCTION__);
+ usbvision_release(usbvision);
+ }
+
+ PDEBUG(DBG_IO, "success");
+
+
+ return 0;
+}
+
+
+/*
+ * usbvision_ioctl()
+ *
+ * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
+ *
+ */
+static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ struct video_device *dev = video_devdata(file);
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return -EFAULT;
+
+ switch (cmd) {
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ /* ioctls to allow direct acces to the NT100x registers */
+ case VIDIOC_INT_G_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+ int errCode;
+
+ if (reg->i2c_id != 0)
+ return -EINVAL;
+ /* NT100x has a 8-bit register space */
+ errCode = usbvision_read_reg(usbvision, reg->reg&0xff);
+ if (errCode < 0) {
+ err("%s: VIDIOC_INT_G_REGISTER failed: error %d", __FUNCTION__, errCode);
+ }
+ else {
+ reg->val=(unsigned char)errCode;
+ PDEBUG(DBG_IOCTL, "VIDIOC_INT_G_REGISTER reg=0x%02X, value=0x%02X",
+ (unsigned int)reg->reg, reg->val);
+ errCode = 0; // No error
+ }
+ return errCode;
+ }
+ case VIDIOC_INT_S_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+ int errCode;
+
+ if (reg->i2c_id != 0)
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val);
+ if (errCode < 0) {
+ err("%s: VIDIOC_INT_S_REGISTER failed: error %d", __FUNCTION__, errCode);
+ }
+ else {
+ PDEBUG(DBG_IOCTL, "VIDIOC_INT_S_REGISTER reg=0x%02X, value=0x%02X",
+ (unsigned int)reg->reg, reg->val);
+ errCode = 0;
+ }
+ return 0;
+ }
+#endif
+ case VIDIOC_QUERYCAP:
+ {
+ struct v4l2_capability *vc=arg;
+
+ memset(vc, 0, sizeof(*vc));
+ strlcpy(vc->driver, "USBVision", sizeof(vc->driver));
+ strlcpy(vc->card, usbvision_device_data[usbvision->DevModel].ModelString,
+ sizeof(vc->card));
+ strlcpy(vc->bus_info, usbvision->dev->dev.bus_id,
+ sizeof(vc->bus_info));
+ vc->version = USBVISION_DRIVER_VERSION;
+ vc->capabilities = V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_AUDIO |
+ V4L2_CAP_READWRITE |
+ V4L2_CAP_STREAMING |
+ (usbvision->have_tuner ? V4L2_CAP_TUNER : 0);
+ PDEBUG(DBG_IOCTL, "VIDIOC_QUERYCAP");
+ return 0;
+ }
+ case VIDIOC_ENUMINPUT:
+ {
+ struct v4l2_input *vi = arg;
+ int chan;
+
+ if ((vi->index >= usbvision->video_inputs) || (vi->index < 0) )
+ return -EINVAL;
+ if (usbvision->have_tuner) {
+ chan = vi->index;
+ }
+ else {
+ chan = vi->index + 1; //skip Television string
+ }
+ switch(chan) {
+ case 0:
+ if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+ strcpy(vi->name, "White Video Input");
+ }
+ else {
+ strcpy(vi->name, "Television");
+ vi->type = V4L2_INPUT_TYPE_TUNER;
+ vi->audioset = 1;
+ vi->tuner = chan;
+ vi->std = V4L2_STD_PAL | V4L2_STD_NTSC | V4L2_STD_SECAM;
+ }
+ break;
+ case 1:
+ vi->type = V4L2_INPUT_TYPE_CAMERA;
+ if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+ strcpy(vi->name, "Green Video Input");
+ }
+ else {
+ strcpy(vi->name, "Composite Video Input");
+ }
+ vi->std = V4L2_STD_PAL;
+ break;
+ case 2:
+ vi->type = V4L2_INPUT_TYPE_CAMERA;
+ if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+ strcpy(vi->name, "Yellow Video Input");
+ }
+ else {
+ strcpy(vi->name, "S-Video Input");
+ }
+ vi->std = V4L2_STD_PAL;
+ break;
+ case 3:
+ vi->type = V4L2_INPUT_TYPE_CAMERA;
+ strcpy(vi->name, "Red Video Input");
+ vi->std = V4L2_STD_PAL;
+ break;
+ }
+ PDEBUG(DBG_IOCTL, "VIDIOC_ENUMINPUT name=%s:%d tuners=%d type=%d norm=%x",
+ vi->name, vi->index, vi->tuner,vi->type,(int)vi->std);
+ return 0;
+ }
+ case VIDIOC_ENUMSTD:
+ {
+ struct v4l2_standard *e = arg;
+ unsigned int i;
+ int ret;
+
+ i = e->index;
+ if (i >= TVNORMS)
+ return -EINVAL;
+ ret = v4l2_video_std_construct(e, tvnorms[e->index].id,
+ tvnorms[e->index].name);
+ e->index = i;
+ if (ret < 0)
+ return ret;
+ return 0;
+ }
+ case VIDIOC_G_INPUT:
+ {
+ int *input = arg;
+ *input = usbvision->ctl_input;
+ return 0;
+ }
+ case VIDIOC_S_INPUT:
+ {
+ int *input = arg;
+ if ((*input >= usbvision->video_inputs) || (*input < 0) )
+ return -EINVAL;
+ usbvision->ctl_input = *input;
+
+ down(&usbvision->lock);
+ usbvision_muxsel(usbvision, usbvision->ctl_input);
+ usbvision_set_input(usbvision);
+ usbvision_set_output(usbvision, usbvision->curwidth, usbvision->curheight);
+ up(&usbvision->lock);
+ return 0;
+ }
+ case VIDIOC_G_STD:
+ {
+ v4l2_std_id *id = arg;
+
+ *id = usbvision->tvnorm->id;
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_G_STD std_id=%s", usbvision->tvnorm->name);
+ return 0;
+ }
+ case VIDIOC_S_STD:
+ {
+ v4l2_std_id *id = arg;
+ unsigned int i;
+
+ for (i = 0; i < TVNORMS; i++)
+ if (*id == tvnorms[i].id)
+ break;
+ if (i == TVNORMS)
+ for (i = 0; i < TVNORMS; i++)
+ if (*id & tvnorms[i].id)
+ break;
+ if (i == TVNORMS)
+ return -EINVAL;
+
+ down(&usbvision->lock);
+ usbvision->tvnorm = &tvnorms[i];
+
+ call_i2c_clients(usbvision, VIDIOC_S_STD,
+ &usbvision->tvnorm->id);
+
+ up(&usbvision->lock);
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_S_STD std_id=%s", usbvision->tvnorm->name);
+ return 0;
+ }
+ case VIDIOC_G_TUNER:
+ {
+ struct v4l2_tuner *vt = arg;
+
+ if (!usbvision->have_tuner || vt->index) // Only tuner 0
+ return -EINVAL;
+ strcpy(vt->name, "Television");
+ /* Let clients fill in the remainder of this struct */
+ call_i2c_clients(usbvision,VIDIOC_G_TUNER,vt);
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_G_TUNER signal=%x, afc=%x",vt->signal,vt->afc);
+ return 0;
+ }
+ case VIDIOC_S_TUNER:
+ {
+ struct v4l2_tuner *vt = arg;
+
+ // Only no or one tuner for now
+ if (!usbvision->have_tuner || vt->index)
+ return -EINVAL;
+ /* let clients handle this */
+ call_i2c_clients(usbvision,VIDIOC_S_TUNER,vt);
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_S_TUNER");
+ return 0;
+ }
+ case VIDIOC_G_FREQUENCY:
+ {
+ struct v4l2_frequency *freq = arg;
+
+ freq->tuner = 0; // Only one tuner
+ freq->type = V4L2_TUNER_ANALOG_TV;
+ freq->frequency = usbvision->freq;
+ PDEBUG(DBG_IOCTL, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)freq->frequency);
+ return 0;
+ }
+ case VIDIOC_S_FREQUENCY:
+ {
+ struct v4l2_frequency *freq = arg;
+
+ // Only no or one tuner for now
+ if (!usbvision->have_tuner || freq->tuner)
+ return -EINVAL;
+
+ usbvision->freq = freq->frequency;
+ call_i2c_clients(usbvision, cmd, freq);
+ PDEBUG(DBG_IOCTL, "VIDIOC_S_FREQUENCY freq=0x%X", (unsigned)freq->frequency);
+ return 0;
+ }
+ case VIDIOC_G_AUDIO:
+ {
+ struct v4l2_audio *v = arg;
+ memset(v,0, sizeof(v));
+ strcpy(v->name, "TV");
+ PDEBUG(DBG_IOCTL, "VIDIOC_G_AUDIO");
+ return 0;
+ }
+ case VIDIOC_S_AUDIO:
+ {
+ struct v4l2_audio *v = arg;
+ if(v->index) {
+ return -EINVAL;
+ }
+ PDEBUG(DBG_IOCTL, "VIDIOC_S_AUDIO");
+ return 0;
+ }
+ case VIDIOC_QUERYCTRL:
+ {
+ struct v4l2_queryctrl *ctrl = arg;
+ int id=ctrl->id;
+
+ memset(ctrl,0,sizeof(*ctrl));
+ ctrl->id=id;
+
+ call_i2c_clients(usbvision, cmd, arg);
+
+ if (ctrl->type)
+ return 0;
+ else
+ return -EINVAL;
+
+ PDEBUG(DBG_IOCTL,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type);
+ }
+ case VIDIOC_G_CTRL:
+ {
+ struct v4l2_control *ctrl = arg;
+ PDEBUG(DBG_IOCTL,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl);
+ return 0;
+ }
+ case VIDIOC_S_CTRL:
+ {
+ struct v4l2_control *ctrl = arg;
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value);
+ call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl);
+ return 0;
+ }
+ case VIDIOC_REQBUFS:
+ {
+ struct v4l2_requestbuffers *vr = arg;
+ int ret;
+
+ RESTRICT_TO_RANGE(vr->count,1,USBVISION_NUMFRAMES);
+
+ // Check input validity : the user must do a VIDEO CAPTURE and MMAP method.
+ if((vr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ||
+ (vr->memory != V4L2_MEMORY_MMAP))
+ return -EINVAL;
+
+ if(usbvision->streaming == Stream_On) {
+ if ((ret = usbvision_stream_interrupt(usbvision)))
+ return ret;
+ }
+
+ usbvision_empty_framequeues(usbvision);
+
+ usbvision->curFrame = NULL;
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_REQBUFS count=%d",vr->count);
+ return 0;
+ }
+ case VIDIOC_QUERYBUF:
+ {
+ struct v4l2_buffer *vb = arg;
+ struct usbvision_frame *frame;
+
+ // FIXME : must control that buffers are mapped (VIDIOC_REQBUFS has been called)
+
+ if(vb->type != V4L2_CAP_VIDEO_CAPTURE) {
+ return -EINVAL;
+ }
+ if(vb->index>=USBVISION_NUMFRAMES) {
+ return -EINVAL;
+ }
+ // Updating the corresponding frame state
+ vb->flags = 0;
+ frame = &usbvision->frame[vb->index];
+ if(frame->grabstate >= FrameState_Ready)
+ vb->flags |= V4L2_BUF_FLAG_QUEUED;
+ if(frame->grabstate >= FrameState_Done)
+ vb->flags |= V4L2_BUF_FLAG_DONE;
+ if(frame->grabstate == FrameState_Unused)
+ vb->flags |= V4L2_BUF_FLAG_MAPPED;
+ vb->memory = V4L2_MEMORY_MMAP;
+
+ vb->m.offset = vb->index*usbvision->max_frame_size;
+
+ vb->memory = V4L2_MEMORY_MMAP;
+ vb->field = V4L2_FIELD_NONE;
+ vb->length = usbvision->curwidth*usbvision->curheight*usbvision->palette.bytes_per_pixel;
+ vb->timestamp = usbvision->frame[vb->index].timestamp;
+ vb->sequence = usbvision->frame[vb->index].sequence;
+ return 0;
+ }
+ case VIDIOC_QBUF:
+ {
+ struct v4l2_buffer *vb = arg;
+ struct usbvision_frame *frame;
+ unsigned long lock_flags;
+
+ // FIXME : works only on VIDEO_CAPTURE MODE, MMAP.
+ if(vb->type != V4L2_CAP_VIDEO_CAPTURE) {
+ return -EINVAL;
+ }
+ if(vb->index>=USBVISION_NUMFRAMES) {
+ return -EINVAL;
+ }
+
+ frame = &usbvision->frame[vb->index];
+
+ if (frame->grabstate != FrameState_Unused) {
+ return -EAGAIN;
+ }
+
+ /* Mark it as ready and enqueue frame */
+ frame->grabstate = FrameState_Ready;
+ frame->scanstate = ScanState_Scanning;
+ frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */
+
+ vb->flags &= ~V4L2_BUF_FLAG_DONE;
+
+ /* set v4l2_format index */
+ frame->v4l2_format = usbvision->palette;
+
+ spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
+ list_add_tail(&usbvision->frame[vb->index].frame, &usbvision->inqueue);
+ spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_QBUF frame #%d",vb->index);
+ return 0;
+ }
+ case VIDIOC_DQBUF:
+ {
+ struct v4l2_buffer *vb = arg;
+ int ret;
+ struct usbvision_frame *f;
+ unsigned long lock_flags;
+
+ if (vb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (list_empty(&(usbvision->outqueue))) {
+ if (usbvision->streaming == Stream_Idle)
+ return -EINVAL;
+ ret = wait_event_interruptible
+ (usbvision->wait_frame,
+ !list_empty(&(usbvision->outqueue)));
+ if (ret)
+ return ret;
+ }
+
+ spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
+ f = list_entry(usbvision->outqueue.next,
+ struct usbvision_frame, frame);
+ list_del(usbvision->outqueue.next);
+ spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
+
+ f->grabstate = FrameState_Unused;
+
+ vb->memory = V4L2_MEMORY_MMAP;
+ vb->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | V4L2_BUF_FLAG_DONE;
+ vb->index = f->index;
+ vb->sequence = f->sequence;
+ vb->timestamp = f->timestamp;
+ vb->field = V4L2_FIELD_NONE;
+ vb->bytesused = f->scanlength;
+
+ return 0;
+ }
+ case VIDIOC_STREAMON:
+ {
+ int b=V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ usbvision->streaming = Stream_On;
+
+ call_i2c_clients(usbvision,VIDIOC_STREAMON , &b);
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_STREAMON");
+
+ return 0;
+ }
+ case VIDIOC_STREAMOFF:
+ {
+ int *type = arg;
+ int b=V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if(usbvision->streaming == Stream_On) {
+ usbvision_stream_interrupt(usbvision);
+ // Stop all video streamings
+ call_i2c_clients(usbvision,VIDIOC_STREAMOFF , &b);
+ }
+ usbvision_empty_framequeues(usbvision);
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_STREAMOFF");
+ return 0;
+ }
+ case VIDIOC_ENUM_FMT:
+ {
+ struct v4l2_fmtdesc *vfd = arg;
+
+ if(vfd->index>=USBVISION_SUPPORTED_PALETTES-1) {
+ return -EINVAL;
+ }
+ vfd->flags = 0;
+ vfd->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ strcpy(vfd->description,usbvision_v4l2_format[vfd->index].desc);
+ vfd->pixelformat = usbvision_v4l2_format[vfd->index].format;
+ memset(vfd->reserved, 0, sizeof(vfd->reserved));
+ return 0;
+ }
+ case VIDIOC_G_FMT:
+ {
+ struct v4l2_format *vf = arg;
+
+ switch (vf->type) {
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ {
+ vf->fmt.pix.width = usbvision->curwidth;
+ vf->fmt.pix.height = usbvision->curheight;
+ vf->fmt.pix.pixelformat = usbvision->palette.format;
+ vf->fmt.pix.bytesperline = usbvision->curwidth*usbvision->palette.bytes_per_pixel;
+ vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*usbvision->curheight;
+ vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+ vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */
+ PDEBUG(DBG_IOCTL, "VIDIOC_G_FMT w=%d, h=%d, format=%s",
+ vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc);
+ return 0;
+ }
+ default:
+ PDEBUG(DBG_IOCTL, "VIDIOC_G_FMT invalid type %d",vf->type);
+ return -EINVAL;
+ }
+ return 0;
+ }
+ case VIDIOC_TRY_FMT:
+ case VIDIOC_S_FMT:
+ {
+ struct v4l2_format *vf = arg;
+ int formatIdx,ret;
+
+ switch(vf->type) {
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ {
+ /* Find requested format in available ones */
+ for(formatIdx=0;formatIdx<USBVISION_SUPPORTED_PALETTES;formatIdx++) {
+ if(vf->fmt.pix.pixelformat == usbvision_v4l2_format[formatIdx].format) {
+ usbvision->palette = usbvision_v4l2_format[formatIdx];
+ break;
+ }
+ }
+ /* robustness */
+ if(formatIdx == USBVISION_SUPPORTED_PALETTES) {
+ return -EINVAL;
+ }
+ RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH);
+ RESTRICT_TO_RANGE(vf->fmt.pix.height, MIN_FRAME_HEIGHT, MAX_FRAME_HEIGHT);
+
+ vf->fmt.pix.bytesperline = vf->fmt.pix.width*usbvision->palette.bytes_per_pixel;
+ vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*vf->fmt.pix.height;
+
+ if(cmd == VIDIOC_TRY_FMT) {
+ PDEBUG(DBG_IOCTL, "VIDIOC_TRY_FMT grabdisplay w=%d, h=%d, format=%s",
+ vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc);
+ return 0;
+ }
+
+ /* stop io in case it is already in progress */
+ if(usbvision->streaming == Stream_On) {
+ if ((ret = usbvision_stream_interrupt(usbvision)))
+ return ret;
+ }
+ usbvision_empty_framequeues(usbvision);
+
+ usbvision->curFrame = NULL;
+
+ // by now we are committed to the new data...
+ down(&usbvision->lock);
+ usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height);
+ up(&usbvision->lock);
+
+ PDEBUG(DBG_IOCTL, "VIDIOC_S_FMT grabdisplay w=%d, h=%d, format=%s",
+ vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc);
+ return 0;
+ }
+ default:
+ return -EINVAL;
+ }
+ }
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static int usbvision_v4l2_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return video_usercopy(inode, file, cmd, arg, usbvision_v4l2_do_ioctl);
+}
+
+
+static ssize_t usbvision_v4l2_read(struct file *file, char *buf,
+ size_t count, loff_t *ppos)
+{
+ struct video_device *dev = video_devdata(file);
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
+ int noblock = file->f_flags & O_NONBLOCK;
+ unsigned long lock_flags;
+
+ int frmx = -1;
+ int ret,i;
+ struct usbvision_frame *frame;
+
+ PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __FUNCTION__, (unsigned long)count, noblock);
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision) || (buf == NULL))
+ return -EFAULT;
+
+ /* no stream is running, make it running ! */
+ usbvision->streaming = Stream_On;
+ call_i2c_clients(usbvision,VIDIOC_STREAMON , NULL);
+
+ /* First, enqueue as many frames as possible (like a user of VIDIOC_QBUF would do) */
+ for(i=0;i<USBVISION_NUMFRAMES;i++) {
+ frame = &usbvision->frame[i];
+ if(frame->grabstate == FrameState_Unused) {
+ /* Mark it as ready and enqueue frame */
+ frame->grabstate = FrameState_Ready;
+ frame->scanstate = ScanState_Scanning;
+ frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */
+
+ /* set v4l2_format index */
+ frame->v4l2_format = usbvision->palette;
+
+ spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
+ list_add_tail(&frame->frame, &usbvision->inqueue);
+ spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
+ }
+ }
+
+ /* Then try to steal a frame (like a VIDIOC_DQBUF would do) */
+ if (list_empty(&(usbvision->outqueue))) {
+ if(noblock)
+ return -EAGAIN;
+
+ ret = wait_event_interruptible
+ (usbvision->wait_frame,
+ !list_empty(&(usbvision->outqueue)));
+ if (ret)
+ return ret;
+ }
+
+ spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
+ frame = list_entry(usbvision->outqueue.next,
+ struct usbvision_frame, frame);
+ list_del(usbvision->outqueue.next);
+ spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
+
+ /* An error returns an empty frame */
+ if (frame->grabstate == FrameState_Error) {
+ frame->bytes_read = 0;
+ return 0;
+ }
+
+ PDEBUG(DBG_IO, "%s: frmx=%d, bytes_read=%ld, scanlength=%ld", __FUNCTION__,
+ frame->index, frame->bytes_read, frame->scanlength);
+
+ /* copy bytes to user space; we allow for partials reads */
+ if ((count + frame->bytes_read) > (unsigned long)frame->scanlength)
+ count = frame->scanlength - frame->bytes_read;
+
+ if (copy_to_user(buf, frame->data + frame->bytes_read, count)) {
+ return -EFAULT;
+ }
+
+ frame->bytes_read += count;
+ PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld", __FUNCTION__,
+ (unsigned long)count, frame->bytes_read);
+
+ // For now, forget the frame if it has not been read in one shot.
+/* if (frame->bytes_read >= frame->scanlength) {// All data has been read */
+ frame->bytes_read = 0;
+
+ /* Mark it as available to be used again. */
+ usbvision->frame[frmx].grabstate = FrameState_Unused;
+/* } */
+
+ return count;
+}
+
+static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ unsigned long size = vma->vm_end - vma->vm_start,
+ start = vma->vm_start;
+ void *pos;
+ u32 i;
+
+ struct video_device *dev = video_devdata(file);
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
+
+ down(&usbvision->lock);
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision)) {
+ up(&usbvision->lock);
+ return -EFAULT;
+ }
+
+ if (!(vma->vm_flags & VM_WRITE) ||
+ size != PAGE_ALIGN(usbvision->curwidth*usbvision->curheight*usbvision->palette.bytes_per_pixel)) {
+ up(&usbvision->lock);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < USBVISION_NUMFRAMES; i++) {
+ if (((usbvision->max_frame_size*i) >> PAGE_SHIFT) == vma->vm_pgoff)
+ break;
+ }
+ if (i == USBVISION_NUMFRAMES) {
+ PDEBUG(DBG_MMAP, "mmap: user supplied mapping address is out of range");
+ up(&usbvision->lock);
+ return -EINVAL;
+ }
+
+ /* VM_IO is eventually going to replace PageReserved altogether */
+ vma->vm_flags |= VM_IO;
+ vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */
+
+ pos = usbvision->frame[i].data;
+ while (size > 0) {
+
+ if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
+ PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed");
+ up(&usbvision->lock);
+ return -EAGAIN;
+ }
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ up(&usbvision->lock);
+ return 0;
+}
+
+
+/*
+ * Here comes the stuff for radio on usbvision based devices
+ *
+ */
+static int usbvision_radio_open(struct inode *inode, struct file *file)
+{
+ struct video_device *dev = video_devdata(file);
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
+ struct v4l2_frequency freq;
+ int errCode = 0;
+
+ PDEBUG(DBG_IO, "%s:", __FUNCTION__);
+
+ down(&usbvision->lock);
+
+ if (usbvision->user) {
+ err("%s: Someone tried to open an already opened USBVision Radio!", __FUNCTION__);
+ errCode = -EBUSY;
+ }
+ else {
+ if(PowerOnAtOpen) {
+ usbvision_reset_powerOffTimer(usbvision);
+ if (usbvision->power == 0) {
+ usbvision_power_on(usbvision);
+ usbvision_init_i2c(usbvision);
+ }
+ }
+
+ // If so far no errors then we shall start the radio
+ usbvision->radio = 1;
+ call_i2c_clients(usbvision,AUDC_SET_RADIO,&usbvision->tuner_type);
+ freq.frequency = 1517; //SWR3 @ 94.8MHz
+ call_i2c_clients(usbvision, VIDIOC_S_FREQUENCY, &freq);
+ usbvision_set_audio(usbvision, USBVISION_AUDIO_RADIO);
+ usbvision->user++;
+ }
+
+ if (errCode) {
+ if (PowerOnAtOpen) {
+ usbvision_i2c_usb_del_bus(&usbvision->i2c_adap);
+ usbvision_power_off(usbvision);
+ usbvision->initialized = 0;
+ }
+ }
+ up(&usbvision->lock);
+ return errCode;
+}
+
+
+static int usbvision_radio_close(struct inode *inode, struct file *file)
+{
+ struct video_device *dev = video_devdata(file);
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
+ int errCode = 0;
+
+ PDEBUG(DBG_IO, "");
+
+ down(&usbvision->lock);
+
+ usbvision_audio_off(usbvision);
+ usbvision->radio=0;
+ usbvision->user--;
+
+ if (PowerOnAtOpen) {
+ usbvision_set_powerOffTimer(usbvision);
+ usbvision->initialized = 0;
+ }
+
+ up(&usbvision->lock);
+
+ if (usbvision->remove_pending) {
+ info("%s: Final disconnect", __FUNCTION__);
+ usbvision_release(usbvision);
+ }
+
+
+ PDEBUG(DBG_IO, "success");
+
+ return errCode;
+}
+
+static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ struct video_device *dev = video_devdata(file);
+ struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev);
+
+ if (!USBVISION_IS_OPERATIONAL(usbvision))
+ return -EIO;
+
+ switch (cmd) {
+ case VIDIOC_QUERYCAP:
+ {
+ struct v4l2_capability *vc=arg;
+
+ memset(vc, 0, sizeof(*vc));
+ strlcpy(vc->driver, "USBVision", sizeof(vc->driver));
+ strlcpy(vc->card, usbvision_device_data[usbvision->DevModel].ModelString,
+ sizeof(vc->card));
+ strlcpy(vc->bus_info, usbvision->dev->dev.bus_id,
+ sizeof(vc->bus_info));
+ vc->version = USBVISION_DRIVER_VERSION;
+ vc->capabilities = (usbvision->have_tuner ? V4L2_CAP_TUNER : 0);
+ PDEBUG(DBG_IO, "VIDIOC_QUERYCAP");
+ return 0;
+ }
+ case VIDIOC_QUERYCTRL:
+ {
+ struct v4l2_queryctrl *ctrl = arg;
+ int id=ctrl->id;
+
+ memset(ctrl,0,sizeof(*ctrl));
+ ctrl->id=id;
+
+ call_i2c_clients(usbvision, cmd, arg);
+ PDEBUG(DBG_IO,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type);
+
+ if (ctrl->type)
+ return 0;
+ else
+ return -EINVAL;
+
+ }
+ case VIDIOC_G_CTRL:
+ {
+ struct v4l2_control *ctrl = arg;
+
+ call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl);
+ PDEBUG(DBG_IO,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value);
+ return 0;
+ }
+ case VIDIOC_S_CTRL:
+ {
+ struct v4l2_control *ctrl = arg;
+
+ call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl);
+ PDEBUG(DBG_IO, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value);
+ return 0;
+ }
+ case VIDIOC_G_TUNER:
+ {
+ struct v4l2_tuner *t = arg;
+
+ if (t->index > 0)
+ return -EINVAL;
+
+ memset(t,0,sizeof(*t));
+ strcpy(t->name, "Radio");
+ t->type = V4L2_TUNER_RADIO;
+
+ /* Let clients fill in the remainder of this struct */
+ call_i2c_clients(usbvision,VIDIOC_G_TUNER,t);
+ PDEBUG(DBG_IO, "VIDIOC_G_TUNER signal=%x, afc=%x",t->signal,t->afc);
+ return 0;
+ }
+ case VIDIOC_S_TUNER:
+ {
+ struct v4l2_tuner *vt = arg;
+
+ // Only no or one tuner for now
+ if (!usbvision->have_tuner || vt->index)
+ return -EINVAL;
+ /* let clients handle this */
+ call_i2c_clients(usbvision,VIDIOC_S_TUNER,vt);
+
+ PDEBUG(DBG_IO, "VIDIOC_S_TUNER");
+ return 0;
+ }
+ case VIDIOC_G_AUDIO:
+ {
+ struct v4l2_audio *a = arg;
+
+ memset(a,0,sizeof(*a));
+ strcpy(a->name,"Radio");
+ PDEBUG(DBG_IO, "VIDIOC_G_AUDIO");
+ return 0;
+ }
+ case VIDIOC_S_AUDIO:
+ case VIDIOC_S_INPUT:
+ case VIDIOC_S_STD:
+ return 0;
+
+ case VIDIOC_G_FREQUENCY:
+ {
+ struct v4l2_frequency *f = arg;
+
+ memset(f,0,sizeof(*f));
+
+ f->type = V4L2_TUNER_RADIO;
+ f->frequency = usbvision->freq;
+ call_i2c_clients(usbvision, cmd, f);
+ PDEBUG(DBG_IO, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)f->frequency);
+
+ return 0;
+ }
+ case VIDIOC_S_FREQUENCY:
+ {
+ struct v4l2_frequency *f = arg;
+
+ if (f->tuner != 0)
+ return -EINVAL;
+ usbvision->freq = f->frequency;
+ call_i2c_clients(usbvision, cmd, f);
+ PDEBUG(DBG_IO, "VIDIOC_S_FREQUENCY freq=0x%X", (unsigned)f->frequency);
+
+ return 0;
+ }
+ default:
+ {
+ PDEBUG(DBG_IO, "%s: Unknown command %x", __FUNCTION__, cmd);
+ return -ENOIOCTLCMD;
+ }
+ }
+ return 0;
+}
+
+
+static int usbvision_radio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return video_usercopy(inode, file, cmd, arg, usbvision_do_radio_ioctl);
+}
+
+
+/*
+ * Here comes the stuff for vbi on usbvision based devices
+ *
+ */
+static int usbvision_vbi_open(struct inode *inode, struct file *file)
+{
+ /* TODO */
+ return -EINVAL;
+
+}
+
+static int usbvision_vbi_close(struct inode *inode, struct file *file)
+{
+ /* TODO */
+ return -EINVAL;
+}
+
+static int usbvision_do_vbi_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ /* TODO */
+ return -EINVAL;
+}
+
+static int usbvision_vbi_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return video_usercopy(inode, file, cmd, arg, usbvision_do_vbi_ioctl);
+}
+
+
+//
+// Video registration stuff
+//
+
+// Video template
+static struct file_operations usbvision_fops = {
+ .owner = THIS_MODULE,
+ .open = usbvision_v4l2_open,
+ .release = usbvision_v4l2_close,
+ .read = usbvision_v4l2_read,
+ .mmap = usbvision_v4l2_mmap,
+ .ioctl = usbvision_v4l2_ioctl,
+ .llseek = no_llseek,
+};
+static struct video_device usbvision_video_template = {
+ .owner = THIS_MODULE,
+ .type = VID_TYPE_TUNER | VID_TYPE_CAPTURE,
+ .hardware = VID_HARDWARE_USBVISION,
+ .fops = &usbvision_fops,
+ .name = "usbvision-video",
+ .release = video_device_release,
+ .minor = -1,
+};
+
+
+// Radio template
+static struct file_operations usbvision_radio_fops = {
+ .owner = THIS_MODULE,
+ .open = usbvision_radio_open,
+ .release = usbvision_radio_close,
+ .ioctl = usbvision_radio_ioctl,
+ .llseek = no_llseek,
+};
+
+static struct video_device usbvision_radio_template=
+{
+ .owner = THIS_MODULE,
+ .type = VID_TYPE_TUNER,
+ .hardware = VID_HARDWARE_USBVISION,
+ .fops = &usbvision_radio_fops,
+ .release = video_device_release,
+ .name = "usbvision-radio",
+ .minor = -1,
+};
+
+
+// vbi template
+static struct file_operations usbvision_vbi_fops = {
+ .owner = THIS_MODULE,
+ .open = usbvision_vbi_open,
+ .release = usbvision_vbi_close,
+ .ioctl = usbvision_vbi_ioctl,
+ .llseek = no_llseek,
+};
+
+static struct video_device usbvision_vbi_template=
+{
+ .owner = THIS_MODULE,
+ .type = VID_TYPE_TUNER,
+ .hardware = VID_HARDWARE_USBVISION,
+ .fops = &usbvision_vbi_fops,
+ .release = video_device_release,
+ .name = "usbvision-vbi",
+ .minor = -1,
+};
+
+
+static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision,
+ struct video_device *vdev_template,
+ char *name)
+{
+ struct usb_device *usb_dev = usbvision->dev;
+ struct video_device *vdev;
+
+ if (usb_dev == NULL) {
+ err("%s: usbvision->dev is not set", __FUNCTION__);
+ return NULL;
+ }
+
+ vdev = video_device_alloc();
+ if (NULL == vdev) {
+ return NULL;
+ }
+ *vdev = *vdev_template;
+// vdev->minor = -1;
+ vdev->dev = &usb_dev->dev;
+ snprintf(vdev->name, sizeof(vdev->name), "%s", name);
+ video_set_drvdata(vdev, usbvision);
+ return vdev;
+}
+
+// unregister video4linux devices
+static void usbvision_unregister_video(struct usb_usbvision *usbvision)
+{
+ // vbi Device:
+ if (usbvision->vbi) {
+ PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]", usbvision->vbi->minor & 0x1f);
+ if (usbvision->vbi->minor != -1) {
+ video_unregister_device(usbvision->vbi);
+ }
+ else {
+ video_device_release(usbvision->vbi);
+ }
+ usbvision->vbi = NULL;
+ }
+
+ // Radio Device:
+ if (usbvision->rdev) {
+ PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]", usbvision->rdev->minor & 0x1f);
+ if (usbvision->rdev->minor != -1) {
+ video_unregister_device(usbvision->rdev);
+ }
+ else {
+ video_device_release(usbvision->rdev);
+ }
+ usbvision->rdev = NULL;
+ }
+
+ // Video Device:
+ if (usbvision->vdev) {
+ PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]", usbvision->vdev->minor & 0x1f);
+ if (usbvision->vdev->minor != -1) {
+ video_unregister_device(usbvision->vdev);
+ }
+ else {
+ video_device_release(usbvision->vdev);
+ }
+ usbvision->vdev = NULL;
+ }
+}
+
+// register video4linux devices
+static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
+{
+ // Video Device:
+ usbvision->vdev = usbvision_vdev_init(usbvision, &usbvision_video_template, "USBVision Video");
+ if (usbvision->vdev == NULL) {
+ goto err_exit;
+ }
+ if (video_register_device(usbvision->vdev, VFL_TYPE_GRABBER, video_nr)<0) {
+ goto err_exit;
+ }
+ info("USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]", usbvision->nr,usbvision->vdev->minor & 0x1f);
+
+ // Radio Device:
+ if (usbvision_device_data[usbvision->DevModel].Radio) {
+ // usbvision has radio
+ usbvision->rdev = usbvision_vdev_init(usbvision, &usbvision_radio_template, "USBVision Radio");
+ if (usbvision->rdev == NULL) {
+ goto err_exit;
+ }
+ if (video_register_device(usbvision->rdev, VFL_TYPE_RADIO, radio_nr)<0) {
+ goto err_exit;
+ }
+ info("USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]", usbvision->nr, usbvision->rdev->minor & 0x1f);
+ }
+ // vbi Device:
+ if (usbvision_device_data[usbvision->DevModel].vbi) {
+ usbvision->vbi = usbvision_vdev_init(usbvision, &usbvision_vbi_template, "USBVision VBI");
+ if (usbvision->vdev == NULL) {
+ goto err_exit;
+ }
+ if (video_register_device(usbvision->vbi, VFL_TYPE_VBI, vbi_nr)<0) {
+ goto err_exit;
+ }
+ info("USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)", usbvision->nr,usbvision->vbi->minor & 0x1f);
+ }
+ // all done
+ return 0;
+
+ err_exit:
+ err("USBVision[%d]: video_register_device() failed", usbvision->nr);
+ usbvision_unregister_video(usbvision);
+ return -1;
+}
+
+/*
+ * usbvision_alloc()
+ *
+ * This code allocates the struct usb_usbvision. It is filled with default values.
+ *
+ * Returns NULL on error, a pointer to usb_usbvision else.
+ *
+ */
+static struct usb_usbvision *usbvision_alloc(struct usb_device *dev)
+{
+ struct usb_usbvision *usbvision;
+
+ if ((usbvision = kzalloc(sizeof(struct usb_usbvision), GFP_KERNEL)) == NULL) {
+ goto err_exit;
+ }
+
+ usbvision->dev = dev;
+
+ init_MUTEX(&usbvision->lock); /* to 1 == available */
+
+ // prepare control urb for control messages during interrupts
+ usbvision->ctrlUrb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
+ if (usbvision->ctrlUrb == NULL) {
+ goto err_exit;
+ }
+ init_waitqueue_head(&usbvision->ctrlUrb_wq);
+ init_MUTEX(&usbvision->ctrlUrbLock); /* to 1 == available */
+
+ usbvision_init_powerOffTimer(usbvision);
+
+ return usbvision;
+
+err_exit:
+ if (usbvision && usbvision->ctrlUrb) {
+ usb_free_urb(usbvision->ctrlUrb);
+ }
+ if (usbvision) {
+ kfree(usbvision);
+ }
+ return NULL;
+}
+
+/*
+ * usbvision_release()
+ *
+ * This code does final release of struct usb_usbvision. This happens
+ * after the device is disconnected -and- all clients closed their files.
+ *
+ */
+static void usbvision_release(struct usb_usbvision *usbvision)
+{
+ PDEBUG(DBG_PROBE, "");
+
+ down(&usbvision->lock);
+
+ usbvision_reset_powerOffTimer(usbvision);
+
+ usbvision->initialized = 0;
+
+ up(&usbvision->lock);
+
+ usbvision_remove_sysfs(usbvision->vdev);
+ usbvision_unregister_video(usbvision);
+
+ if (usbvision->ctrlUrb) {
+ usb_free_urb(usbvision->ctrlUrb);
+ }
+
+ kfree(usbvision);
+
+ PDEBUG(DBG_PROBE, "success");
+}
+
+
+/******************************** usb interface *****************************************/
+
+static void usbvision_configure_video(struct usb_usbvision *usbvision)
+{
+ int model,i;
+
+ if (usbvision == NULL)
+ return;
+
+ model = usbvision->DevModel;
+ usbvision->palette = usbvision_v4l2_format[2]; // V4L2_PIX_FMT_RGB24;
+
+ if (usbvision_device_data[usbvision->DevModel].Vin_Reg2 >= 0) {
+ usbvision->Vin_Reg2_Preset = usbvision_device_data[usbvision->DevModel].Vin_Reg2 & 0xff;
+ } else {
+ usbvision->Vin_Reg2_Preset = 0;
+ }
+
+ for (i = 0; i < TVNORMS; i++)
+ if (usbvision_device_data[model].VideoNorm == tvnorms[i].mode)
+ break;
+ if (i == TVNORMS)
+ i = 0;
+ usbvision->tvnorm = &tvnorms[i]; /* set default norm */
+
+ usbvision->video_inputs = usbvision_device_data[model].VideoChannels;
+ usbvision->ctl_input = 0;
+
+ /* This should be here to make i2c clients to be able to register */
+ usbvision_audio_off(usbvision); //first switch off audio
+ if (!PowerOnAtOpen) {
+ usbvision_power_on(usbvision); //and then power up the noisy tuner
+ usbvision_init_i2c(usbvision);
+ }
+}
+
+/*
+ * usbvision_probe()
+ *
+ * This procedure queries device descriptor and accepts the interface
+ * if it looks like USBVISION video device
+ *
+ */
+static int __devinit usbvision_probe(struct usb_interface *intf, const struct usb_device_id *devid)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ __u8 ifnum = intf->altsetting->desc.bInterfaceNumber;
+ const struct usb_host_interface *interface;
+ struct usb_usbvision *usbvision = NULL;
+ const struct usb_endpoint_descriptor *endpoint;
+ int model;
+
+ PDEBUG(DBG_PROBE, "VID=%#04x, PID=%#04x, ifnum=%u",
+ dev->descriptor.idVendor, dev->descriptor.idProduct, ifnum);
+ /* Is it an USBVISION video dev? */
+ model = 0;
+ for(model = 0; usbvision_device_data[model].idVendor; model++) {
+ if (le16_to_cpu(dev->descriptor.idVendor) != usbvision_device_data[model].idVendor) {
+ continue;
+ }
+ if (le16_to_cpu(dev->descriptor.idProduct) != usbvision_device_data[model].idProduct) {
+ continue;
+ }
+
+ info("%s: %s found", __FUNCTION__, usbvision_device_data[model].ModelString);
+ break;
+ }
+
+ if (usbvision_device_data[model].idVendor == 0) {
+ return -ENODEV; //no matching device
+ }
+ if (usbvision_device_data[model].Interface >= 0) {
+ interface = &dev->actconfig->interface[usbvision_device_data[model].Interface]->altsetting[0];
+ }
+ else {
+ interface = &dev->actconfig->interface[ifnum]->altsetting[0];
+ }
+ endpoint = &interface->endpoint[1].desc;
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC) {
+ err("%s: interface %d. has non-ISO endpoint!", __FUNCTION__, ifnum);
+ err("%s: Endpoint attribures %d", __FUNCTION__, endpoint->bmAttributes);
+ return -ENODEV;
+ }
+ if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
+ err("%s: interface %d. has ISO OUT endpoint!", __FUNCTION__, ifnum);
+ return -ENODEV;
+ }
+
+ usb_get_dev(dev);
+
+ if ((usbvision = usbvision_alloc(dev)) == NULL) {
+ err("%s: couldn't allocate USBVision struct", __FUNCTION__);
+ return -ENOMEM;
+ }
+ if (dev->descriptor.bNumConfigurations > 1) {
+ usbvision->bridgeType = BRIDGE_NT1004;
+ }
+ else if (usbvision_device_data[model].ModelString == "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)") {
+ usbvision->bridgeType = BRIDGE_NT1005;
+ }
+ else {
+ usbvision->bridgeType = BRIDGE_NT1003;
+ }
+ PDEBUG(DBG_PROBE, "bridgeType %d", usbvision->bridgeType);
+
+ down(&usbvision->lock);
+
+ usbvision->nr = usbvision_nr++;
+
+ usbvision->have_tuner = usbvision_device_data[model].Tuner;
+ if (usbvision->have_tuner) {
+ usbvision->tuner_type = usbvision_device_data[model].TunerType;
+ }
+
+ usbvision->tuner_addr = ADDR_UNSET;
+
+ usbvision->DevModel = model;
+ usbvision->remove_pending = 0;
+ usbvision->iface = ifnum;
+ usbvision->ifaceAltInactive = 0;
+ usbvision->ifaceAltActive = 1;
+ usbvision->video_endp = endpoint->bEndpointAddress;
+ usbvision->isocPacketSize = 0;
+ usbvision->usb_bandwidth = 0;
+ usbvision->user = 0;
+ usbvision->streaming = Stream_Off;
+ usbvision_register_video(usbvision);
+ usbvision_configure_video(usbvision);
+ up(&usbvision->lock);
+
+
+ usb_set_intfdata (intf, usbvision);
+ usbvision_create_sysfs(usbvision->vdev);
+
+ PDEBUG(DBG_PROBE, "success");
+ return 0;
+}
+
+
+/*
+ * usbvision_disconnect()
+ *
+ * This procedure stops all driver activity, deallocates interface-private
+ * structure (pointed by 'ptr') and after that driver should be removable
+ * with no ill consequences.
+ *
+ */
+static void __devexit usbvision_disconnect(struct usb_interface *intf)
+{
+ struct usb_usbvision *usbvision = usb_get_intfdata(intf);
+
+ PDEBUG(DBG_PROBE, "");
+
+ if (usbvision == NULL) {
+ err("%s: usb_get_intfdata() failed", __FUNCTION__);
+ return;
+ }
+ usb_set_intfdata (intf, NULL);
+
+ down(&usbvision->lock);
+
+ // At this time we ask to cancel outstanding URBs
+ usbvision_stop_isoc(usbvision);
+
+ if (usbvision->power) {
+ usbvision_i2c_usb_del_bus(&usbvision->i2c_adap);
+ usbvision_power_off(usbvision);
+ }
+ usbvision->remove_pending = 1; // Now all ISO data will be ignored
+
+ usb_put_dev(usbvision->dev);
+ usbvision->dev = NULL; // USB device is no more
+
+ up(&usbvision->lock);
+
+ if (usbvision->user) {
+ info("%s: In use, disconnect pending", __FUNCTION__);
+ wake_up_interruptible(&usbvision->wait_frame);
+ wake_up_interruptible(&usbvision->wait_stream);
+ }
+ else {
+ usbvision_release(usbvision);
+ }
+
+ PDEBUG(DBG_PROBE, "success");
+
+}
+
+static struct usb_driver usbvision_driver = {
+ .name = "usbvision",
+ .id_table = usbvision_table,
+ .probe = usbvision_probe,
+ .disconnect = usbvision_disconnect
+};
+
+/*
+ * customdevice_process()
+ *
+ * This procedure preprocesses CustomDevice parameter if any
+ *
+ */
+void customdevice_process(void)
+{
+ usbvision_device_data[0]=usbvision_device_data[1];
+ usbvision_table[0]=usbvision_table[1];
+
+ if(CustomDevice)
+ {
+ char *parse=CustomDevice;
+
+ PDEBUG(DBG_PROBE, "CustomDevide=%s", CustomDevice);
+
+ /*format is CustomDevice="0x0573 0x4D31 0 7113 3 PAL 1 1 1 5 -1 -1 -1 -1 -1"
+ usbvision_device_data[0].idVendor;
+ usbvision_device_data[0].idProduct;
+ usbvision_device_data[0].Interface;
+ usbvision_device_data[0].Codec;
+ usbvision_device_data[0].VideoChannels;
+ usbvision_device_data[0].VideoNorm;
+ usbvision_device_data[0].AudioChannels;
+ usbvision_device_data[0].Radio;
+ usbvision_device_data[0].Tuner;
+ usbvision_device_data[0].TunerType;
+ usbvision_device_data[0].Vin_Reg1;
+ usbvision_device_data[0].Vin_Reg2;
+ usbvision_device_data[0].X_Offset;
+ usbvision_device_data[0].Y_Offset;
+ usbvision_device_data[0].Dvi_yuv;
+ usbvision_device_data[0].ModelString;
+ */
+
+ rmspace(parse);
+ usbvision_device_data[0].ModelString="USBVISION Custom Device";
+
+ parse+=2;
+ sscanf(parse,"%x",&usbvision_device_data[0].idVendor);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "idVendor=0x%.4X", usbvision_device_data[0].idVendor);
+ parse+=2;
+ sscanf(parse,"%x",&usbvision_device_data[0].idProduct);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "idProduct=0x%.4X", usbvision_device_data[0].idProduct);
+ sscanf(parse,"%d",&usbvision_device_data[0].Interface);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "Interface=%d", usbvision_device_data[0].Interface);
+ sscanf(parse,"%d",&usbvision_device_data[0].Codec);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "Codec=%d", usbvision_device_data[0].Codec);
+ sscanf(parse,"%d",&usbvision_device_data[0].VideoChannels);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "VideoChannels=%d", usbvision_device_data[0].VideoChannels);
+
+ switch(*parse)
+ {
+ case 'P':
+ PDEBUG(DBG_PROBE, "VideoNorm=PAL");
+ usbvision_device_data[0].VideoNorm=VIDEO_MODE_PAL;
+ break;
+
+ case 'S':
+ PDEBUG(DBG_PROBE, "VideoNorm=SECAM");
+ usbvision_device_data[0].VideoNorm=VIDEO_MODE_SECAM;
+ break;
+
+ case 'N':
+ PDEBUG(DBG_PROBE, "VideoNorm=NTSC");
+ usbvision_device_data[0].VideoNorm=VIDEO_MODE_NTSC;
+ break;
+
+ default:
+ PDEBUG(DBG_PROBE, "VideoNorm=PAL (by default)");
+ usbvision_device_data[0].VideoNorm=VIDEO_MODE_PAL;
+ break;
+ }
+ goto2next(parse);
+
+ sscanf(parse,"%d",&usbvision_device_data[0].AudioChannels);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "AudioChannels=%d", usbvision_device_data[0].AudioChannels);
+ sscanf(parse,"%d",&usbvision_device_data[0].Radio);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "Radio=%d", usbvision_device_data[0].Radio);
+ sscanf(parse,"%d",&usbvision_device_data[0].Tuner);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "Tuner=%d", usbvision_device_data[0].Tuner);
+ sscanf(parse,"%d",&usbvision_device_data[0].TunerType);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "TunerType=%d", usbvision_device_data[0].TunerType);
+ sscanf(parse,"%d",&usbvision_device_data[0].Vin_Reg1);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "Vin_Reg1=%d", usbvision_device_data[0].Vin_Reg1);
+ sscanf(parse,"%d",&usbvision_device_data[0].Vin_Reg2);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "Vin_Reg2=%d", usbvision_device_data[0].Vin_Reg2);
+ sscanf(parse,"%d",&usbvision_device_data[0].X_Offset);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "X_Offset=%d", usbvision_device_data[0].X_Offset);
+ sscanf(parse,"%d",&usbvision_device_data[0].Y_Offset);
+ goto2next(parse);
+ PDEBUG(DBG_PROBE, "Y_Offset=%d", usbvision_device_data[0].Y_Offset);
+ sscanf(parse,"%d",&usbvision_device_data[0].Dvi_yuv);
+ PDEBUG(DBG_PROBE, "Dvi_yuv=%d", usbvision_device_data[0].Dvi_yuv);
+
+ //add to usbvision_table also
+ usbvision_table[0].match_flags=USB_DEVICE_ID_MATCH_DEVICE;
+ usbvision_table[0].idVendor=usbvision_device_data[0].idVendor;
+ usbvision_table[0].idProduct=usbvision_device_data[0].idProduct;
+
+ }
+}
+
+
+
+/*
+ * usbvision_init()
+ *
+ * This code is run to initialize the driver.
+ *
+ */
+static int __init usbvision_init(void)
+{
+ int errCode;
+
+ PDEBUG(DBG_PROBE, "");
+
+ PDEBUG(DBG_IOCTL, "IOCTL debugging is enabled [video]");
+ PDEBUG(DBG_IO, "IO debugging is enabled [video]");
+ PDEBUG(DBG_PROBE, "PROBE debugging is enabled [video]");
+ PDEBUG(DBG_MMAP, "MMAP debugging is enabled [video]");
+
+ /* disable planar mode support unless compression enabled */
+ if (isocMode != ISOC_MODE_COMPRESS ) {
+ // FIXME : not the right way to set supported flag
+ usbvision_v4l2_format[6].supported = 0; // V4L2_PIX_FMT_YVU420
+ usbvision_v4l2_format[7].supported = 0; // V4L2_PIX_FMT_YUV422P
+ }
+
+ customdevice_process();
+
+ errCode = usb_register(&usbvision_driver);
+
+ if (errCode == 0) {
+ info(DRIVER_DESC " : " USBVISION_VERSION_STRING);
+ PDEBUG(DBG_PROBE, "success");
+ }
+ return errCode;
+}
+
+static void __exit usbvision_exit(void)
+{
+ PDEBUG(DBG_PROBE, "");
+
+ usb_deregister(&usbvision_driver);
+ PDEBUG(DBG_PROBE, "success");
+}
+
+module_init(usbvision_init);
+module_exit(usbvision_exit);
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
--- /dev/null
+/*
+ * USBVISION.H
+ * usbvision header file
+ *
+ * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
+ * Dwaine Garden <dwainegarden@rogers.com>
+ *
+ *
+ * Report problems to v4l MailingList : http://www.redhat.com/mailman/listinfo/video4linux-list
+ *
+ * This module is part of usbvision driver project.
+ * Updates to driver completed by Dwaine P. Garden
+ * v4l2 conversion by Thierry Merle <thierry.merle@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef __LINUX_USBVISION_H
+#define __LINUX_USBVISION_H
+
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include <linux/videodev2.h>
+
+#define USBVISION_DEBUG /* Turn on debug messages */
+
+#ifndef VID_HARDWARE_USBVISION
+ #define VID_HARDWARE_USBVISION 34 /* USBVision Video Grabber */
+#endif
+
+#define USBVISION_PWR_REG 0x00
+ #define USBVISION_SSPND_EN (1 << 1)
+ #define USBVISION_RES2 (1 << 2)
+ #define USBVISION_PWR_VID (1 << 5)
+ #define USBVISION_E2_EN (1 << 7)
+#define USBVISION_CONFIG_REG 0x01
+#define USBVISION_ADRS_REG 0x02
+#define USBVISION_ALTER_REG 0x03
+#define USBVISION_FORCE_ALTER_REG 0x04
+#define USBVISION_STATUS_REG 0x05
+#define USBVISION_IOPIN_REG 0x06
+ #define USBVISION_IO_1 (1 << 0)
+ #define USBVISION_IO_2 (1 << 1)
+ #define USBVISION_AUDIO_IN 0
+ #define USBVISION_AUDIO_TV 1
+ #define USBVISION_AUDIO_RADIO 2
+ #define USBVISION_AUDIO_MUTE 3
+#define USBVISION_SER_MODE 0x07
+#define USBVISION_SER_ADRS 0x08
+#define USBVISION_SER_CONT 0x09
+#define USBVISION_SER_DAT1 0x0A
+#define USBVISION_SER_DAT2 0x0B
+#define USBVISION_SER_DAT3 0x0C
+#define USBVISION_SER_DAT4 0x0D
+#define USBVISION_EE_DATA 0x0E
+#define USBVISION_EE_LSBAD 0x0F
+#define USBVISION_EE_CONT 0x10
+#define USBVISION_DRM_CONT 0x12
+ #define USBVISION_REF (1 << 0)
+ #define USBVISION_RES_UR (1 << 2)
+ #define USBVISION_RES_FDL (1 << 3)
+ #define USBVISION_RES_VDW (1 << 4)
+#define USBVISION_DRM_PRM1 0x13
+#define USBVISION_DRM_PRM2 0x14
+#define USBVISION_DRM_PRM3 0x15
+#define USBVISION_DRM_PRM4 0x16
+#define USBVISION_DRM_PRM5 0x17
+#define USBVISION_DRM_PRM6 0x18
+#define USBVISION_DRM_PRM7 0x19
+#define USBVISION_DRM_PRM8 0x1A
+#define USBVISION_VIN_REG1 0x1B
+ #define USBVISION_8_422_SYNC 0x01
+ #define USBVISION_16_422_SYNC 0x02
+ #define USBVISION_VSNC_POL (1 << 3)
+ #define USBVISION_HSNC_POL (1 << 4)
+ #define USBVISION_FID_POL (1 << 5)
+ #define USBVISION_HVALID_PO (1 << 6)
+ #define USBVISION_VCLK_POL (1 << 7)
+#define USBVISION_VIN_REG2 0x1C
+ #define USBVISION_AUTO_FID (1 << 0)
+ #define USBVISION_NONE_INTER (1 << 1)
+ #define USBVISION_NOHVALID (1 << 2)
+ #define USBVISION_UV_ID (1 << 3)
+ #define USBVISION_FIX_2C (1 << 4)
+ #define USBVISION_SEND_FID (1 << 5)
+ #define USBVISION_KEEP_BLANK (1 << 7)
+#define USBVISION_LXSIZE_I 0x1D
+#define USBVISION_MXSIZE_I 0x1E
+#define USBVISION_LYSIZE_I 0x1F
+#define USBVISION_MYSIZE_I 0x20
+#define USBVISION_LX_OFFST 0x21
+#define USBVISION_MX_OFFST 0x22
+#define USBVISION_LY_OFFST 0x23
+#define USBVISION_MY_OFFST 0x24
+#define USBVISION_FRM_RATE 0x25
+#define USBVISION_LXSIZE_O 0x26
+#define USBVISION_MXSIZE_O 0x27
+#define USBVISION_LYSIZE_O 0x28
+#define USBVISION_MYSIZE_O 0x29
+#define USBVISION_FILT_CONT 0x2A
+#define USBVISION_VO_MODE 0x2B
+#define USBVISION_INTRA_CYC 0x2C
+#define USBVISION_STRIP_SZ 0x2D
+#define USBVISION_FORCE_INTRA 0x2E
+#define USBVISION_FORCE_UP 0x2F
+#define USBVISION_BUF_THR 0x30
+#define USBVISION_DVI_YUV 0x31
+#define USBVISION_AUDIO_CONT 0x32
+#define USBVISION_AUD_PK_LEN 0x33
+#define USBVISION_BLK_PK_LEN 0x34
+#define USBVISION_PCM_THR1 0x38
+#define USBVISION_PCM_THR2 0x39
+#define USBVISION_DIST_THR_L 0x3A
+#define USBVISION_DIST_THR_H 0x3B
+#define USBVISION_MAX_DIST_L 0x3C
+#define USBVISION_MAX_DIST_H 0x3D
+#define USBVISION_OP_CODE 0x33
+
+#define MAX_BYTES_PER_PIXEL 4
+
+#define MIN_FRAME_WIDTH 64
+#define MAX_USB_WIDTH 320 //384
+#define MAX_FRAME_WIDTH 320 //384 /*streching sometimes causes crashes*/
+
+#define MIN_FRAME_HEIGHT 48
+#define MAX_USB_HEIGHT 240 //288
+#define MAX_FRAME_HEIGHT 240 //288 /*Streching sometimes causes crashes*/
+
+#define MAX_FRAME_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
+#define USBVISION_CLIPMASK_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) //bytesize of clipmask
+
+#define USBVISION_URB_FRAMES 32
+#define USBVISION_MAX_ISOC_PACKET_SIZE 959 // NT1003 Specs Document says 1023
+
+#define USBVISION_NUM_HEADERMARKER 20
+#define USBVISION_NUMFRAMES 3 /* Maximum number of frames an application can get */
+#define USBVISION_NUMSBUF 2 /* Dimensioning the USB S buffering */
+
+#define USBVISION_POWEROFF_TIME 3 * (HZ) // 3 seconds
+
+
+#define FRAMERATE_MIN 0
+#define FRAMERATE_MAX 31
+
+enum {
+ ISOC_MODE_YUV422 = 0x03,
+ ISOC_MODE_YUV420 = 0x14,
+ ISOC_MODE_COMPRESS = 0x60,
+};
+
+/* This macro restricts an int variable to an inclusive range */
+#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
+
+/*
+ * We use macros to do YUV -> RGB conversion because this is
+ * very important for speed and totally unimportant for size.
+ *
+ * YUV -> RGB Conversion
+ * ---------------------
+ *
+ * B = 1.164*(Y-16) + 2.018*(V-128)
+ * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
+ * R = 1.164*(Y-16) + 1.596*(U-128)
+ *
+ * If you fancy integer arithmetics (as you should), hear this:
+ *
+ * 65536*B = 76284*(Y-16) + 132252*(V-128)
+ * 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128)
+ * 65536*R = 76284*(Y-16) + 104595*(U-128)
+ *
+ * Make sure the output values are within [0..255] range.
+ */
+#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
+#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
+ int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
+ mm_y = (my) - 16; \
+ mm_u = (mu) - 128; \
+ mm_v = (mv) - 128; \
+ mm_yc= mm_y * 76284; \
+ mm_b = (mm_yc + 132252*mm_v ) >> 16; \
+ mm_g = (mm_yc - 53281*mm_u - 25625*mm_v ) >> 16; \
+ mm_r = (mm_yc + 104595*mm_u ) >> 16; \
+ mb = LIMIT_RGB(mm_b); \
+ mg = LIMIT_RGB(mm_g); \
+ mr = LIMIT_RGB(mm_r); \
+}
+
+/* Debugging aid */
+#define USBVISION_SAY_AND_WAIT(what) { \
+ wait_queue_head_t wq; \
+ init_waitqueue_head(&wq); \
+ printk(KERN_INFO "Say: %s\n", what); \
+ interruptible_sleep_on_timeout (&wq, HZ*3); \
+}
+
+/*
+ * This macro checks if usbvision is still operational. The 'usbvision'
+ * pointer must be valid, usbvision->dev must be valid, we are not
+ * removing the device and the device has not erred on us.
+ */
+#define USBVISION_IS_OPERATIONAL(udevice) (\
+ (udevice != NULL) && \
+ ((udevice)->dev != NULL) && \
+ ((udevice)->last_error == 0) && \
+ (!(udevice)->remove_pending))
+
+/* I2C structures */
+struct i2c_algo_usb_data {
+ void *data; /* private data for lowlevel routines */
+ int (*inb) (void *data, unsigned char addr, char *buf, short len);
+ int (*outb) (void *data, unsigned char addr, char *buf, short len);
+
+ /* local settings */
+ int udelay;
+ int mdelay;
+ int timeout;
+};
+
+#define I2C_USB_ADAP_MAX 16
+
+/* ----------------------------------------------------------------- */
+/* usbvision video structures */
+/* ----------------------------------------------------------------- */
+enum ScanState {
+ ScanState_Scanning, /* Scanning for header */
+ ScanState_Lines /* Parsing lines */
+};
+
+/* Completion states of the data parser */
+enum ParseState {
+ ParseState_Continue, /* Just parse next item */
+ ParseState_NextFrame, /* Frame done, send it to V4L */
+ ParseState_Out, /* Not enough data for frame */
+ ParseState_EndParse /* End parsing */
+};
+
+enum FrameState {
+ FrameState_Unused, /* Unused (no MCAPTURE) */
+ FrameState_Ready, /* Ready to start grabbing */
+ FrameState_Grabbing, /* In the process of being grabbed into */
+ FrameState_Done, /* Finished grabbing, but not been synced yet */
+ FrameState_DoneHold, /* Are syncing or reading */
+ FrameState_Error, /* Something bad happened while processing */
+};
+
+/* stream states */
+enum StreamState {
+ Stream_Off, /* Driver streaming is completely OFF */
+ Stream_Idle, /* Driver streaming is ready to be put ON by the application */
+ Stream_Interrupt, /* Driver streaming must be interrupted */
+ Stream_On, /* Driver streaming is put ON by the application */
+};
+
+enum IsocState {
+ IsocState_InFrame, /* Isoc packet is member of frame */
+ IsocState_NoFrame, /* Isoc packet is not member of any frame */
+};
+
+struct usb_device;
+
+struct usbvision_sbuf {
+ char *data;
+ struct urb *urb;
+};
+
+#define USBVISION_MAGIC_1 0x55
+#define USBVISION_MAGIC_2 0xAA
+#define USBVISION_HEADER_LENGTH 0x0c
+#define USBVISION_SAA7111_ADDR 0x48
+#define USBVISION_SAA7113_ADDR 0x4a
+#define USBVISION_IIC_LRACK 0x20
+#define USBVISION_IIC_LRNACK 0x30
+#define USBVISION_FRAME_FORMAT_PARAM_INTRA (1<<7)
+
+struct usbvision_v4l2_format_st {
+ int supported;
+ int bytes_per_pixel;
+ int depth;
+ int format;
+ char *desc;
+};
+#define USBVISION_SUPPORTED_PALETTES ARRAY_SIZE(usbvision_v4l2_format)
+
+struct usbvision_frame_header {
+ unsigned char magic_1; /* 0 magic */
+ unsigned char magic_2; /* 1 magic */
+ unsigned char headerLength; /* 2 */
+ unsigned char frameNum; /* 3 */
+ unsigned char framePhase; /* 4 */
+ unsigned char frameLatency; /* 5 */
+ unsigned char dataFormat; /* 6 */
+ unsigned char formatParam; /* 7 */
+ unsigned char frameWidthLo; /* 8 */
+ unsigned char frameWidthHi; /* 9 */
+ unsigned char frameHeightLo; /* 10 */
+ unsigned char frameHeightHi; /* 11 */
+ __u16 frameWidth; /* 8 - 9 after endian correction*/
+ __u16 frameHeight; /* 10 - 11 after endian correction*/
+};
+
+/* tvnorms */
+struct usbvision_tvnorm {
+ char *name;
+ v4l2_std_id id;
+ /* mode for saa7113h */
+ int mode;
+};
+
+struct usbvision_frame {
+ char *data; /* Frame buffer */
+ struct usbvision_frame_header isocHeader; /* Header from stream */
+
+ int width; /* Width application is expecting */
+ int height; /* Height */
+ int index; /* Frame index */
+ int frmwidth; /* Width the frame actually is */
+ int frmheight; /* Height */
+
+ volatile int grabstate; /* State of grabbing */
+ int scanstate; /* State of scanning */
+
+ struct list_head frame;
+
+ int curline; /* Line of frame we're working on */
+
+ long scanlength; /* uncompressed, raw data length of frame */
+ long bytes_read; /* amount of scanlength that has been read from data */
+ struct usbvision_v4l2_format_st v4l2_format; /* format the user needs*/
+ int v4l2_linesize; /* bytes for one videoline*/
+ struct timeval timestamp;
+ int sequence; // How many video frames we send to user
+};
+
+#define CODEC_SAA7113 7113
+#define CODEC_SAA7111 7111
+#define BRIDGE_NT1003 1003
+#define BRIDGE_NT1004 1004
+#define BRIDGE_NT1005 1005
+
+struct usbvision_device_data_st {
+ int idVendor;
+ int idProduct;
+ int Interface; /* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */
+ int Codec;
+ int VideoChannels;
+ __u64 VideoNorm;
+ int AudioChannels;
+ int Radio;
+ int vbi;
+ int Tuner;
+ int TunerType;
+ int Vin_Reg1;
+ int Vin_Reg2;
+ int X_Offset;
+ int Y_Offset;
+ int Dvi_yuv;
+ char *ModelString;
+};
+
+/* Declared on usbvision-cards.c */
+extern struct usbvision_device_data_st usbvision_device_data[];
+extern struct usb_device_id usbvision_table[];
+
+struct usb_usbvision {
+ struct video_device *vdev; /* Video Device */
+ struct video_device *rdev; /* Radio Device */
+ struct video_device *vbi; /* VBI Device */
+
+ /* i2c Declaration Section*/
+ struct i2c_adapter i2c_adap;
+ struct i2c_algo_usb_data i2c_algo;
+ struct i2c_client i2c_client;
+
+ struct urb *ctrlUrb;
+ unsigned char ctrlUrbBuffer[8];
+ int ctrlUrbBusy;
+ struct usb_ctrlrequest ctrlUrbSetup;
+ wait_queue_head_t ctrlUrb_wq; // Processes waiting
+ struct semaphore ctrlUrbLock;
+
+ /* configuration part */
+ int have_tuner;
+ int tuner_type;
+ int tuner_addr;
+ int bridgeType; // NT1003, NT1004, NT1005
+ int channel;
+ int radio;
+ int video_inputs; // # of inputs
+ unsigned long freq;
+ int AudioMute;
+ int AudioChannel;
+ int isocMode; // format of video data for the usb isoc-transfer
+ unsigned int nr; // Number of the device
+
+ /* Device structure */
+ struct usb_device *dev;
+ unsigned char iface; /* Video interface number */
+ unsigned char ifaceAltActive, ifaceAltInactive; /* Alt settings */
+ unsigned char Vin_Reg2_Preset;
+ struct semaphore lock;
+ struct timer_list powerOffTimer;
+ struct work_struct powerOffWork;
+ int power; /* is the device powered on? */
+ int user; /* user count for exclusive use */
+ int initialized; /* Had we already sent init sequence? */
+ int DevModel; /* What type of USBVISION device we got? */
+ enum StreamState streaming; /* Are we streaming Isochronous? */
+ int last_error; /* What calamity struck us? */
+ int curwidth; /* width of the frame the device is currently set to*/
+ int curheight; /* height of the frame the device is currently set to*/
+ int stretch_width; /* stretch-factor for frame width (from usb to screen)*/
+ int stretch_height; /* stretch-factor for frame height (from usb to screen)*/
+ char *fbuf; /* Videodev buffer area for mmap*/
+ int max_frame_size; /* Bytes in one video frame */
+ int fbuf_size; /* Videodev buffer size */
+ spinlock_t queue_lock; /* spinlock for protecting mods on inqueue and outqueue */
+ struct list_head inqueue, outqueue; /* queued frame list and ready to dequeue frame list */
+ wait_queue_head_t wait_frame; /* Processes waiting */
+ wait_queue_head_t wait_stream; /* Processes waiting */
+ struct usbvision_frame *curFrame; // pointer to current frame, set by usbvision_find_header
+ struct usbvision_frame frame[USBVISION_NUMFRAMES]; // frame buffer
+ struct usbvision_sbuf sbuf[USBVISION_NUMSBUF]; // S buffering
+ volatile int remove_pending; /* If set then about to exit */
+
+ /* Scratch space from the Isochronous Pipe.*/
+ unsigned char *scratch;
+ int scratch_read_ptr;
+ int scratch_write_ptr;
+ int scratch_headermarker[USBVISION_NUM_HEADERMARKER];
+ int scratch_headermarker_read_ptr;
+ int scratch_headermarker_write_ptr;
+ enum IsocState isocstate;
+ struct usbvision_v4l2_format_st palette;
+
+ struct v4l2_capability vcap; /* Video capabilities */
+ unsigned int ctl_input; /* selected input */
+ struct usbvision_tvnorm *tvnorm; /* selected tv norm */
+ unsigned char video_endp; /* 0x82 for USBVISION devices based */
+
+ // Decompression stuff:
+ unsigned char *IntraFrameBuffer; /* Buffer for reference frame */
+ int BlockPos; //for test only
+ int requestIntra; // 0 = normal; 1 = intra frame is requested;
+ int lastIsocFrameNum; // check for lost isoc frames
+ int isocPacketSize; // need to calculate usedBandwidth
+ int usedBandwidth; // used bandwidth 0-100%, need to set comprLevel
+ int comprLevel; // How strong (100) or weak (0) is compression
+ int lastComprLevel; // How strong (100) or weak (0) was compression
+ int usb_bandwidth; /* Mbit/s */
+
+ /* Statistics that can be overlayed on the screen */
+ unsigned long isocUrbCount; // How many URBs we received so far
+ unsigned long urb_length; /* Length of last URB */
+ unsigned long isocDataCount; /* How many bytes we received */
+ unsigned long header_count; /* How many frame headers we found */
+ unsigned long scratch_ovf_count; /* How many times we overflowed scratch */
+ unsigned long isocSkipCount; /* How many empty ISO packets received */
+ unsigned long isocErrCount; /* How many bad ISO packets received */
+ unsigned long isocPacketCount; // How many packets we totally got
+ unsigned long timeInIrq; // How long do we need for interrupt
+ int isocMeasureBandwidthCount;
+ int frame_num; // How many video frames we send to user
+ int maxStripLen; // How big is the biggest strip
+ int comprBlockPos;
+ int stripLenErrors; // How many times was BlockPos greater than StripLen
+ int stripMagicErrors;
+ int stripLineNumberErrors;
+ int ComprBlockTypes[4];
+};
+
+
+/* --------------------------------------------------------------- */
+/* defined in usbvision-i2c.c */
+/* i2c-algo-usb declaration */
+/* --------------------------------------------------------------- */
+
+int usbvision_i2c_usb_add_bus(struct i2c_adapter *);
+int usbvision_i2c_usb_del_bus(struct i2c_adapter *);
+
+static inline void *i2c_get_algo_usb_data (struct i2c_algo_usb_data *dev)
+{
+ return dev->data;
+}
+
+static inline void i2c_set_algo_usb_data (struct i2c_algo_usb_data *dev, void *data)
+{
+ dev->data = data;
+}
+
+
+/* ----------------------------------------------------------------------- */
+/* usbvision specific I2C functions */
+/* ----------------------------------------------------------------------- */
+int usbvision_init_i2c(struct usb_usbvision *usbvision);
+void call_i2c_clients(struct usb_usbvision *usbvision, unsigned int cmd,void *arg);
+
+/* defined in usbvision-core.c */
+void *usbvision_rvmalloc(unsigned long size);
+void usbvision_rvfree(void *mem, unsigned long size);
+int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg);
+int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg,
+ unsigned char value);
+
+int usbvision_frames_alloc(struct usb_usbvision *usbvision);
+void usbvision_frames_free(struct usb_usbvision *usbvision);
+int usbvision_scratch_alloc(struct usb_usbvision *usbvision);
+void usbvision_scratch_free(struct usb_usbvision *usbvision);
+int usbvision_sbuf_alloc(struct usb_usbvision *usbvision);
+void usbvision_sbuf_free(struct usb_usbvision *usbvision);
+int usbvision_decompress_alloc(struct usb_usbvision *usbvision);
+void usbvision_decompress_free(struct usb_usbvision *usbvision);
+
+int usbvision_setup(struct usb_usbvision *usbvision,int format);
+int usbvision_init_isoc(struct usb_usbvision *usbvision);
+int usbvision_restart_isoc(struct usb_usbvision *usbvision);
+void usbvision_stop_isoc(struct usb_usbvision *usbvision);
+
+int usbvision_set_audio(struct usb_usbvision *usbvision, int AudioChannel);
+int usbvision_audio_off(struct usb_usbvision *usbvision);
+
+int usbvision_begin_streaming(struct usb_usbvision *usbvision);
+void usbvision_empty_framequeues(struct usb_usbvision *dev);
+int usbvision_stream_interrupt(struct usb_usbvision *dev);
+
+int usbvision_muxsel(struct usb_usbvision *usbvision, int channel);
+int usbvision_set_input(struct usb_usbvision *usbvision);
+int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height);
+
+void usbvision_init_powerOffTimer(struct usb_usbvision *usbvision);
+void usbvision_set_powerOffTimer(struct usb_usbvision *usbvision);
+void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision);
+int usbvision_power_off(struct usb_usbvision *usbvision);
+int usbvision_power_on(struct usb_usbvision *usbvision);
+
+#endif /* __LINUX_USBVISION_H */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
struct video_buffer *buffer = arg;
memset(buffer, 0, sizeof(*buffer));
+ memset(&fbuf2, 0, sizeof(fbuf2));
err = drv(inode, file, VIDIOC_G_FBUF, &fbuf2);
if (err < 0) {
case VIDIOCSPICT: /* set tone controls & partial capture format */
{
struct video_picture *pict = arg;
+ memset(&fbuf2, 0, sizeof(fbuf2));
set_v4l_control(inode, file,
V4L2_CID_BRIGHTNESS, pict->brightness, drv);
}
case VIDIOCSTUNER: /* select a tuner input */
{
- err = 0;
+ struct video_tuner *tun = arg;
+ struct v4l2_tuner t;
+ memset(&t,0,sizeof(t));
+
+ t.index=tun->tuner;
+
+ err = drv(inode, file, VIDIOC_S_INPUT, &t);
+ if (err < 0)
+ dprintk("VIDIOCSTUNER / VIDIOC_S_INPUT: %d\n",err);
+
break;
}
case VIDIOCGFREQ: /* get frequency */
{
unsigned long *freq = arg;
+ memset(&freq2,0,sizeof(freq2));
freq2.tuner = 0;
err = drv(inode, file, VIDIOC_G_FREQUENCY, &freq2);
case VIDIOCSFREQ: /* set frequency */
{
unsigned long *freq = arg;
+ memset(&freq2,0,sizeof(freq2));
- freq2.tuner = 0;
drv(inode, file, VIDIOC_G_FREQUENCY, &freq2);
freq2.frequency = *freq;
err = drv(inode, file, VIDIOC_S_FREQUENCY, &freq2);
case VIDIOCGAUDIO: /* get audio properties/controls */
{
struct video_audio *aud = arg;
+ memset(&aud2,0,sizeof(aud2));
err = drv(inode, file, VIDIOC_G_AUDIO, &aud2);
if (err < 0) {
{
int *i = arg;
+ memset(&buf2,0,sizeof(buf2));
buf2.index = *i;
buf2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
err = drv(inode, file, VIDIOC_QUERYBUF, &buf2);
*/
+char *v4l2_norm_to_name(v4l2_std_id id)
+{
+ char *name;
+
+ switch (id) {
+ case V4L2_STD_PAL:
+ name="PAL"; break;
+ case V4L2_STD_PAL_BG:
+ name="PAL-BG"; break;
+ case V4L2_STD_PAL_DK:
+ name="PAL-DK"; break;
+ case V4L2_STD_PAL_B:
+ name="PAL-B"; break;
+ case V4L2_STD_PAL_B1:
+ name="PAL-B1"; break;
+ case V4L2_STD_PAL_G:
+ name="PAL-G"; break;
+ case V4L2_STD_PAL_H:
+ name="PAL-H"; break;
+ case V4L2_STD_PAL_I:
+ name="PAL-I"; break;
+ case V4L2_STD_PAL_D:
+ name="PAL-D"; break;
+ case V4L2_STD_PAL_D1:
+ name="PAL-D1"; break;
+ case V4L2_STD_PAL_K:
+ name="PAL-K"; break;
+ case V4L2_STD_PAL_M:
+ name="PAL-M"; break;
+ case V4L2_STD_PAL_N:
+ name="PAL-N"; break;
+ case V4L2_STD_PAL_Nc:
+ name="PAL-Nc"; break;
+ case V4L2_STD_PAL_60:
+ name="PAL-60"; break;
+ case V4L2_STD_NTSC:
+ name="NTSC"; break;
+ case V4L2_STD_NTSC_M:
+ name="NTSC-M"; break;
+ case V4L2_STD_NTSC_M_JP:
+ name="NTSC-M-JP"; break;
+ case V4L2_STD_NTSC_443:
+ name="NTSC-443"; break;
+ case V4L2_STD_NTSC_M_KR:
+ name="NTSC-M-KR"; break;
+ case V4L2_STD_SECAM:
+ name="SECAM"; break;
+ case V4L2_STD_SECAM_DK:
+ name="SECAM-DK"; break;
+ case V4L2_STD_SECAM_B:
+ name="SECAM-B"; break;
+ case V4L2_STD_SECAM_D:
+ name="SECAM-D"; break;
+ case V4L2_STD_SECAM_G:
+ name="SECAM-G"; break;
+ case V4L2_STD_SECAM_H:
+ name="SECAM-H"; break;
+ case V4L2_STD_SECAM_K:
+ name="SECAM-K"; break;
+ case V4L2_STD_SECAM_K1:
+ name="SECAM-K1"; break;
+ case V4L2_STD_SECAM_L:
+ name="SECAM-L"; break;
+ case V4L2_STD_SECAM_LC:
+ name="SECAM-LC"; break;
+ default:
+ name="Unknown"; break;
+ }
+
+ return name;
+}
+
/* Fill in the fields of a v4l2_standard structure according to the
'id' and 'transmission' parameters. Returns negative on error. */
int v4l2_video_std_construct(struct v4l2_standard *vs,
};
char *v4l2_type_names[] = {
- [V4L2_BUF_TYPE_VIDEO_CAPTURE] = "video-cap",
- [V4L2_BUF_TYPE_VIDEO_OVERLAY] = "video-over",
- [V4L2_BUF_TYPE_VIDEO_OUTPUT] = "video-out",
- [V4L2_BUF_TYPE_VBI_CAPTURE] = "vbi-cap",
- [V4L2_BUF_TYPE_VBI_OUTPUT] = "vbi-out",
+ [V4L2_BUF_TYPE_VIDEO_CAPTURE] = "video-cap",
+ [V4L2_BUF_TYPE_VIDEO_OVERLAY] = "video-over",
+ [V4L2_BUF_TYPE_VIDEO_OUTPUT] = "video-out",
+ [V4L2_BUF_TYPE_VBI_CAPTURE] = "vbi-cap",
+ [V4L2_BUF_TYPE_VBI_OUTPUT] = "vbi-out",
+ [V4L2_BUF_TYPE_SLICED_VBI_CAPTURE] = "sliced-vbi-cap",
+ [V4L2_BUF_TYPE_SLICED_VBI_OUTPUT] = "slicec-vbi-out",
};
static char *v4l2_memory_names[] = {
/* ----------------------------------------------------------------- */
+EXPORT_SYMBOL(v4l2_norm_to_name);
EXPORT_SYMBOL(v4l2_video_std_construct);
EXPORT_SYMBOL(v4l2_prio_init);
size);
kfree(videocodec_buf);
- videocodec_buf = (char *) kmalloc(size, GFP_KERNEL);
+ videocodec_buf = kmalloc(size, GFP_KERNEL);
i = 0;
i += scnprintf(videocodec_buf + i, size - 1,
struct video_device* video_devdata(struct file *file)
{
- return video_device[iminor(file->f_dentry->d_inode)];
+ return video_device[iminor(file->f_path.dentry->d_inode)];
}
/*
dbgarg (cmd, "%02ld:%02d:%02d.%08ld index=%d, type=%s, "
"bytesused=%d, flags=0x%08d, "
- "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx\n",
+ "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx, length=%d\n",
(p->timestamp.tv_sec/3600),
(int)(p->timestamp.tv_sec/60)%60,
(int)(p->timestamp.tv_sec%60),
p->bytesused,p->flags,
p->field,p->sequence,
prt_names(p->memory,v4l2_memory_names),
- p->m.userptr);
+ p->m.userptr, p->length);
dbgarg2 ("timecode= %02d:%02d:%02d type=%d, "
"flags=0x%08d, frames=%d, userbits=0x%08x\n",
tc->hours,tc->minutes,tc->seconds,
static inline void v4l_print_pix_fmt (struct video_device *vfd,
struct v4l2_pix_format *fmt)
{
- dbgarg2 ("width=%d, height=%d, format=0x%08x, field=%s, "
+ dbgarg2 ("width=%d, height=%d, format=%c%c%c%c, field=%s, "
"bytesperline=%d sizeimage=%d, colorspace=%d\n",
- fmt->width,fmt->height,fmt->pixelformat,
+ fmt->width,fmt->height,
+ (fmt->pixelformat & 0xff),
+ (fmt->pixelformat >> 8) & 0xff,
+ (fmt->pixelformat >> 16) & 0xff,
+ (fmt->pixelformat >> 24) & 0xff,
prt_names(fmt->field,v4l2_field_names_FIXME),
fmt->bytesperline,fmt->sizeimage,fmt->colorspace);
};
v4l_print_ioctl(vfd->name, cmd);
}
+ if (_IOC_TYPE(cmd)=='v')
+ return v4l_compat_translate_ioctl(inode,file,cmd,arg,
+ __video_do_ioctl);
+
switch(cmd) {
/* --- capabilities ------------------------------------------ */
case VIDIOC_QUERYCAP:
}
if (!ret)
dbgarg (cmd, "index=%d, type=%d, flags=%d, "
- "description=%s,"
- " pixelformat=0x%8x\n",
+ "pixelformat=%c%c%c%c, description='%s'\n",
f->index, f->type, f->flags,
- f->description,
- f->pixelformat);
-
+ (f->pixelformat & 0xff),
+ (f->pixelformat >> 8) & 0xff,
+ (f->pixelformat >> 16) & 0xff,
+ (f->pixelformat >> 24) & 0xff,
+ f->description);
break;
}
case VIDIOC_G_FMT:
case VIDIOC_ENUMSTD:
{
struct v4l2_standard *p = arg;
- unsigned int index = p->index;
+ v4l2_std_id id = vfd->tvnorms,curr_id=0;
+ unsigned int index = p->index,i;
- if (!vfd->tvnormsize) {
- printk (KERN_WARNING "%s: no TV norms defined!\n",
- vfd->name);
+ if (index<0) {
+ ret=-EINVAL;
break;
}
- if (index<0 || index >= vfd->tvnormsize) {
- ret=-EINVAL;
- break;
+ /* Return norm array on a canonical way */
+ for (i=0;i<= index && id; i++) {
+ if ( (id & V4L2_STD_PAL) == V4L2_STD_PAL) {
+ curr_id = V4L2_STD_PAL;
+ } else if ( (id & V4L2_STD_PAL_BG) == V4L2_STD_PAL_BG) {
+ curr_id = V4L2_STD_PAL_BG;
+ } else if ( (id & V4L2_STD_PAL_DK) == V4L2_STD_PAL_DK) {
+ curr_id = V4L2_STD_PAL_DK;
+ } else if ( (id & V4L2_STD_PAL_B) == V4L2_STD_PAL_B) {
+ curr_id = V4L2_STD_PAL_B;
+ } else if ( (id & V4L2_STD_PAL_B1) == V4L2_STD_PAL_B1) {
+ curr_id = V4L2_STD_PAL_B1;
+ } else if ( (id & V4L2_STD_PAL_G) == V4L2_STD_PAL_G) {
+ curr_id = V4L2_STD_PAL_G;
+ } else if ( (id & V4L2_STD_PAL_H) == V4L2_STD_PAL_H) {
+ curr_id = V4L2_STD_PAL_H;
+ } else if ( (id & V4L2_STD_PAL_I) == V4L2_STD_PAL_I) {
+ curr_id = V4L2_STD_PAL_I;
+ } else if ( (id & V4L2_STD_PAL_D) == V4L2_STD_PAL_D) {
+ curr_id = V4L2_STD_PAL_D;
+ } else if ( (id & V4L2_STD_PAL_D1) == V4L2_STD_PAL_D1) {
+ curr_id = V4L2_STD_PAL_D1;
+ } else if ( (id & V4L2_STD_PAL_K) == V4L2_STD_PAL_K) {
+ curr_id = V4L2_STD_PAL_K;
+ } else if ( (id & V4L2_STD_PAL_M) == V4L2_STD_PAL_M) {
+ curr_id = V4L2_STD_PAL_M;
+ } else if ( (id & V4L2_STD_PAL_N) == V4L2_STD_PAL_N) {
+ curr_id = V4L2_STD_PAL_N;
+ } else if ( (id & V4L2_STD_PAL_Nc) == V4L2_STD_PAL_Nc) {
+ curr_id = V4L2_STD_PAL_Nc;
+ } else if ( (id & V4L2_STD_PAL_60) == V4L2_STD_PAL_60) {
+ curr_id = V4L2_STD_PAL_60;
+ } else if ( (id & V4L2_STD_NTSC) == V4L2_STD_NTSC) {
+ curr_id = V4L2_STD_NTSC;
+ } else if ( (id & V4L2_STD_NTSC_M) == V4L2_STD_NTSC_M) {
+ curr_id = V4L2_STD_NTSC_M;
+ } else if ( (id & V4L2_STD_NTSC_M_JP) == V4L2_STD_NTSC_M_JP) {
+ curr_id = V4L2_STD_NTSC_M_JP;
+ } else if ( (id & V4L2_STD_NTSC_443) == V4L2_STD_NTSC_443) {
+ curr_id = V4L2_STD_NTSC_443;
+ } else if ( (id & V4L2_STD_NTSC_M_KR) == V4L2_STD_NTSC_M_KR) {
+ curr_id = V4L2_STD_NTSC_M_KR;
+ } else if ( (id & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
+ curr_id = V4L2_STD_SECAM;
+ } else if ( (id & V4L2_STD_SECAM_DK) == V4L2_STD_SECAM_DK) {
+ curr_id = V4L2_STD_SECAM_DK;
+ } else if ( (id & V4L2_STD_SECAM_B) == V4L2_STD_SECAM_B) {
+ curr_id = V4L2_STD_SECAM_B;
+ } else if ( (id & V4L2_STD_SECAM_D) == V4L2_STD_SECAM_D) {
+ curr_id = V4L2_STD_SECAM_D;
+ } else if ( (id & V4L2_STD_SECAM_G) == V4L2_STD_SECAM_G) {
+ curr_id = V4L2_STD_SECAM_G;
+ } else if ( (id & V4L2_STD_SECAM_H) == V4L2_STD_SECAM_H) {
+ curr_id = V4L2_STD_SECAM_H;
+ } else if ( (id & V4L2_STD_SECAM_K) == V4L2_STD_SECAM_K) {
+ curr_id = V4L2_STD_SECAM_K;
+ } else if ( (id & V4L2_STD_SECAM_K1) == V4L2_STD_SECAM_K1) {
+ curr_id = V4L2_STD_SECAM_K1;
+ } else if ( (id & V4L2_STD_SECAM_L) == V4L2_STD_SECAM_L) {
+ curr_id = V4L2_STD_SECAM_L;
+ } else if ( (id & V4L2_STD_SECAM_LC) == V4L2_STD_SECAM_LC) {
+ curr_id = V4L2_STD_SECAM_LC;
+ } else {
+ break;
+ }
+ id &= ~curr_id;
}
- v4l2_video_std_construct(p, vfd->tvnorms[p->index].id,
- vfd->tvnorms[p->index].name);
+ if (i<=index)
+ return -EINVAL;
+
+ v4l2_video_std_construct(p, curr_id,v4l2_norm_to_name(curr_id));
p->index = index;
dbgarg (cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, "
}
case VIDIOC_S_STD:
{
- v4l2_std_id *id = arg;
- unsigned int i;
-
- if (!vfd->tvnormsize) {
- printk (KERN_WARNING "%s: no TV norms defined!\n",
- vfd->name);
- break;
- }
+ v4l2_std_id *id = arg,norm;
dbgarg (cmd, "value=%Lu\n", (long long unsigned) *id);
- /* First search for exact match */
- for (i = 0; i < vfd->tvnormsize; i++)
- if (*id == vfd->tvnorms[i].id)
- break;
- /* Then for a generic video std that contains desired std */
- if (i == vfd->tvnormsize)
- for (i = 0; i < vfd->tvnormsize; i++)
- if (*id & vfd->tvnorms[i].id)
- break;
- if (i == vfd->tvnormsize) {
+ norm = (*id) & vfd->tvnorms;
+ if ( vfd->tvnorms && !norm) /* Check if std is supported */
break;
- }
/* Calls the specific handler */
if (vfd->vidioc_s_std)
- ret=vfd->vidioc_s_std(file, fh, i);
+ ret=vfd->vidioc_s_std(file, fh, &norm);
else
ret=-EINVAL;
/* Updates standard information */
- if (!ret)
- vfd->current_norm=*id;
+ if (ret>=0)
+ vfd->current_norm=norm;
break;
}
case VIDIOC_G_AUDIO:
{
struct v4l2_audio *p=arg;
+ __u32 index=p->index;
if (!vfd->vidioc_g_audio)
break;
+
+ memset(p,0,sizeof(*p));
+ p->index=index;
dbgarg(cmd, "Get for index=%d\n", p->index);
ret=vfd->vidioc_g_audio(file, fh, p);
if (!ret)
ret=vfd->vidioc_g_parm(file, fh, p);
} else {
struct v4l2_standard s;
- int i;
-
- if (!vfd->tvnormsize) {
- printk (KERN_WARNING "%s: no TV norms defined!\n",
- vfd->name);
- break;
- }
if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
- for (i = 0; i < vfd->tvnormsize; i++)
- if (vfd->tvnorms[i].id == vfd->current_norm)
- break;
- if (i >= vfd->tvnormsize)
- return -EINVAL;
-
v4l2_video_std_construct(&s, vfd->current_norm,
- vfd->tvnorms[i].name);
+ v4l2_norm_to_name(vfd->current_norm));
memset(p,0,sizeof(*p));
case VIDIOC_G_TUNER:
{
struct v4l2_tuner *p=arg;
+ __u32 index=p->index;
+
if (!vfd->vidioc_g_tuner)
break;
+
+ memset(p,0,sizeof(*p));
+ p->index=index;
+
ret=vfd->vidioc_g_tuner(file, fh, p);
if (!ret)
dbgarg (cmd, "index=%d, name=%s, type=%d, "
struct v4l2_frequency *p=arg;
if (!vfd->vidioc_g_frequency)
break;
+
+ memset(p,0,sizeof(*p));
+
ret=vfd->vidioc_g_frequency(file, fh, p);
if (!ret)
dbgarg (cmd, "tuner=%d, type=%d, frequency=%d\n",
ret=vfd->vidioc_log_status(file, fh);
break;
}
-
- /* --- Others --------------------------------------------- */
-
- default:
- ret=v4l_compat_translate_ioctl(inode,file,cmd,arg,__video_do_ioctl);
- }
+ } /* switch */
if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) {
if (ret<0) {
static int vino_i2c_del_bus(void)
{
- return i2c_sgi_del_bus(&vino_i2c_adapter);
+ return i2c_del_adapter(&vino_i2c_adapter);
}
static int i2c_camera_command(unsigned int cmd, void *arg)
return (0);
}
-static struct v4l2_tvnorm tvnorms[] = {
- {
- .name = "NTSC-M",
- .id = V4L2_STD_NTSC_M,
- }
-};
-
-static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id a)
+static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *i)
{
-
return 0;
}
#ifdef CONFIG_VIDEO_V4L1_COMPAT
.vidiocgmbuf = vidiocgmbuf,
#endif
- .tvnorms = tvnorms,
- .tvnormsize = ARRAY_SIZE(tvnorms),
+ .tvnorms = V4L2_STD_NTSC_M,
+ .current_norm = V4L2_STD_NTSC_M,
};
/* -----------------------------------------------------------------
Initialization and module stuff
dev->vidq.timeout.data = (unsigned long)dev;
init_timer(&dev->vidq.timeout);
- vivi.current_norm = tvnorms[0].id;
-
ret = video_register_device(&vivi, VFL_TYPE_GRABBER, video_nr);
printk(KERN_INFO "Video Technology Magazine Virtual Video Capture Board (Load status: %d)\n", ret);
return ret;
static void
zoran_unregister_i2c (struct zoran *zr)
{
- i2c_bit_del_bus((&zr->i2c_adapter));
+ i2c_del_adapter(&zr->i2c_adapter);
}
/* Check a zoran_params struct for correctness, insert default params */
static ssize_t zoran_write(struct file *file, const char __user *buffer,
size_t count, loff_t *ppos)
{
- struct zoran *zr = PDE(file->f_dentry->d_inode)->data;
+ struct zoran *zr = PDE(file->f_path.dentry->d_inode)->data;
char *string, *sp;
char *line, *ldelim, *varname, *svar, *tdelim;
}
string[count] = 0;
dprintk(4, KERN_INFO "%s: write_proc: name=%s count=%zu zr=%p\n",
- ZR_DEVNAME(zr), file->f_dentry->d_name.name, count, zr);
+ ZR_DEVNAME(zr), file->f_path.dentry->d_name.name, count, zr);
ldelim = " \t\n";
tdelim = "=";
line = strpbrk(sp, ldelim);
+++ /dev/null
-/*
- zr36120.c - Zoran 36120/36125 based framegrabbers
-
- Copyright (C) 1998-1999 Pauline Middelink <middelin@polyware.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/signal.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <linux/sched.h>
-#include <linux/video_decoder.h>
-
-#include <asm/uaccess.h>
-
-#include "tuner.h"
-#include "zr36120.h"
-#include "zr36120_mem.h"
-
-/* mark an required function argument unused - lintism */
-#define UNUSED(x) (void)(x)
-
-/* sensible default */
-#ifndef CARDTYPE
-#define CARDTYPE 0
-#endif
-
-/* Anybody who uses more than four? */
-#define ZORAN_MAX 4
-
-static unsigned int triton1=0; /* triton1 chipset? */
-static unsigned int cardtype[ZORAN_MAX]={ [ 0 ... ZORAN_MAX-1 ] = CARDTYPE };
-static int video_nr = -1;
-static int vbi_nr = -1;
-
-static struct pci_device_id zr36120_pci_tbl[] = {
- { PCI_VENDOR_ID_ZORAN,PCI_DEVICE_ID_ZORAN_36120,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, zr36120_pci_tbl);
-
-MODULE_AUTHOR("Pauline Middelink <middelin@polyware.nl>");
-MODULE_DESCRIPTION("Zoran ZR36120 based framegrabber");
-MODULE_LICENSE("GPL");
-
-module_param(triton1, uint, 0);
-module_param_array(cardtype, uint, NULL, 0);
-module_param(video_nr, int, 0);
-module_param(vbi_nr, int, 0);
-
-static int zoran_cards;
-static struct zoran zorans[ZORAN_MAX];
-
-/*
- * the meaning of each element can be found in zr36120.h
- * Determining the value of gpdir/gpval can be tricky. The
- * best way is to run the card under the original software
- * and read the values from the general purpose registers
- * 0x28 and 0x2C. How you do that is left as an exercise
- * to the impatient reader :)
- */
-#define T 1 /* to separate the bools from the ints */
-#define F 0
-static struct tvcard tvcards[] = {
- /* reported working by <middelin@polyware.nl> */
-/*0*/ { "Trust Victor II",
- 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } },
- /* reported working by <Michael.Paxton@aihw.gov.au> */
-/*1*/ { "Aitech WaveWatcher TV-PCI",
- 3, 0, T, F, T, T, 0x7F, 0x80, { 1, TUNER(3), SVHS(6) }, { 0 } },
- /* reported working by ? */
-/*2*/ { "Genius Video Wonder PCI Video Capture Card",
- 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } },
- /* reported working by <Pascal.Gabriel@wanadoo.fr> */
-/*3*/ { "Guillemot Maxi-TV PCI",
- 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } },
- /* reported working by "Craig Whitmore <lennon@igrin.co.nz> */
-/*4*/ { "Quadrant Buster",
- 3, 3, T, F, T, T, 0x7F, 0x80, { SVHS(1), TUNER(2), 3 }, { 1, 2, 3 } },
- /* a debug entry which has all inputs mapped */
-/*5*/ { "ZR36120 based framegrabber (all inputs enabled)",
- 6, 0, T, T, T, T, 0x7F, 0x80, { 1, 2, 3, 4, 5, 6 }, { 0 } }
-};
-#undef T
-#undef F
-#define NRTVCARDS (sizeof(tvcards)/sizeof(tvcards[0]))
-
-#ifdef __sparc__
-#define ENDIANESS 0
-#else
-#define ENDIANESS ZORAN_VFEC_LE
-#endif
-
-static struct { const char name[8]; uint mode; uint bpp; } palette2fmt[] = {
-/* n/a */ { "n/a", 0, 0 },
-/* GREY */ { "GRAY", 0, 0 },
-/* HI240 */ { "HI240", 0, 0 },
-/* RGB565 */ { "RGB565", ZORAN_VFEC_RGB_RGB565|ENDIANESS, 2 },
-/* RGB24 */ { "RGB24", ZORAN_VFEC_RGB_RGB888|ENDIANESS|ZORAN_VFEC_PACK24, 3 },
-/* RGB32 */ { "RGB32", ZORAN_VFEC_RGB_RGB888|ENDIANESS, 4 },
-/* RGB555 */ { "RGB555", ZORAN_VFEC_RGB_RGB555|ENDIANESS, 2 },
-/* YUV422 */ { "YUV422", ZORAN_VFEC_RGB_YUV422|ENDIANESS, 2 },
-/* YUYV */ { "YUYV", 0, 0 },
-/* UYVY */ { "UYVY", 0, 0 },
-/* YUV420 */ { "YUV420", 0, 0 },
-/* YUV411 */ { "YUV411", 0, 0 },
-/* RAW */ { "RAW", 0, 0 },
-/* YUV422P */ { "YUV422P", 0, 0 },
-/* YUV411P */ { "YUV411P", 0, 0 }};
-#define NRPALETTES (sizeof(palette2fmt)/sizeof(palette2fmt[0]))
-#undef ENDIANESS
-
-/* ----------------------------------------------------------------------- */
-/* ZORAN chipset detector */
-/* shamelessly stolen from bttv.c */
-/* Reason for beeing here: we need to detect if we are running on a */
-/* Triton based chipset, and if so, enable a certain bit */
-/* ----------------------------------------------------------------------- */
-static
-void __init handle_chipset(void)
-{
- /* Just in case some nut set this to something dangerous */
- if (triton1)
- triton1 = ZORAN_VDC_TRICOM;
-
- if (pci_pci_problems & PCIPCI_TRITON) {
- printk(KERN_INFO "zoran: Host bridge 82437FX Triton PIIX\n");
- triton1 = ZORAN_VDC_TRICOM;
- }
-}
-
-/* ----------------------------------------------------------------------- */
-/* ZORAN functions */
-/* ----------------------------------------------------------------------- */
-
-static void zoran_set_geo(struct zoran* ztv, struct vidinfo* i);
-
-#if 0 /* unused */
-static
-void zoran_dump(struct zoran *ztv)
-{
- char str[256];
- char *p=str; /* shut up, gcc! */
- int i;
-
- for (i=0; i<0x60; i+=4) {
- if ((i % 16) == 0) {
- if (i) printk("%s\n",str);
- p = str;
- p+= sprintf(str, KERN_DEBUG " %04x: ",i);
- }
- p += sprintf(p, "%08x ",zrread(i));
- }
-}
-#endif /* unused */
-
-static
-void reap_states(struct zoran* ztv)
-{
- /* count frames */
- ztv->fieldnr++;
-
- /*
- * Are we busy at all?
- * This depends on if there is a workqueue AND the
- * videotransfer is enabled on the chip...
- */
- if (ztv->workqueue && (zrread(ZORAN_VDC) & ZORAN_VDC_VIDEN))
- {
- struct vidinfo* newitem;
-
- /* did we get a complete frame? */
- if (zrread(ZORAN_VSTR) & ZORAN_VSTR_GRAB)
- return;
-
-DEBUG(printk(CARD_DEBUG "completed %s at %p\n",CARD,ztv->workqueue->kindof==FBUFFER_GRAB?"grab":"read",ztv->workqueue));
-
- /* we are done with this buffer, tell everyone */
- ztv->workqueue->status = FBUFFER_DONE;
- ztv->workqueue->fieldnr = ztv->fieldnr;
- /* not good, here for BTTV_FIELDNR reasons */
- ztv->lastfieldnr = ztv->fieldnr;
-
- switch (ztv->workqueue->kindof) {
- case FBUFFER_GRAB:
- wake_up_interruptible(&ztv->grabq);
- break;
- case FBUFFER_VBI:
- wake_up_interruptible(&ztv->vbiq);
- break;
- default:
- printk(CARD_INFO "somebody killed the workqueue (kindof=%d)!\n",CARD,ztv->workqueue->kindof);
- }
-
- /* item completed, skip to next item in queue */
- write_lock(&ztv->lock);
- newitem = ztv->workqueue->next;
- ztv->workqueue->next = 0; /* mark completed */
- ztv->workqueue = newitem;
- write_unlock(&ztv->lock);
- }
-
- /*
- * ok, so it seems we have nothing in progress right now.
- * Lets see if we can find some work.
- */
- if (ztv->workqueue)
- {
- struct vidinfo* newitem;
-again:
-
-DEBUG(printk(CARD_DEBUG "starting %s at %p\n",CARD,ztv->workqueue->kindof==FBUFFER_GRAB?"grab":"read",ztv->workqueue));
-
- /* loadup the frame settings */
- read_lock(&ztv->lock);
- zoran_set_geo(ztv,ztv->workqueue);
- read_unlock(&ztv->lock);
-
- switch (ztv->workqueue->kindof) {
- case FBUFFER_GRAB:
- case FBUFFER_VBI:
- zrand(~ZORAN_OCR_OVLEN, ZORAN_OCR);
- zror(ZORAN_VSTR_SNAPSHOT,ZORAN_VSTR);
- zror(ZORAN_VDC_VIDEN,ZORAN_VDC);
-
- /* start single-shot grab */
- zror(ZORAN_VSTR_GRAB, ZORAN_VSTR);
- break;
- default:
- printk(CARD_INFO "what is this doing on the queue? (kindof=%d)\n",CARD,ztv->workqueue->kindof);
- write_lock(&ztv->lock);
- newitem = ztv->workqueue->next;
- ztv->workqueue->next = 0;
- ztv->workqueue = newitem;
- write_unlock(&ztv->lock);
- if (newitem)
- goto again; /* yeah, sure.. */
- }
- /* bye for now */
- return;
- }
-DEBUG(printk(CARD_DEBUG "nothing in queue\n",CARD));
-
- /*
- * What? Even the workqueue is empty? Am i really here
- * for nothing? Did i come all that way to... do nothing?
- */
-
- /* do we need to overlay? */
- if (test_bit(STATE_OVERLAY, &ztv->state))
- {
- /* are we already overlaying? */
- if (!(zrread(ZORAN_OCR) & ZORAN_OCR_OVLEN) ||
- !(zrread(ZORAN_VDC) & ZORAN_VDC_VIDEN))
- {
-DEBUG(printk(CARD_DEBUG "starting overlay\n",CARD));
-
- read_lock(&ztv->lock);
- zoran_set_geo(ztv,&ztv->overinfo);
- read_unlock(&ztv->lock);
-
- zror(ZORAN_OCR_OVLEN, ZORAN_OCR);
- zrand(~ZORAN_VSTR_SNAPSHOT,ZORAN_VSTR);
- zror(ZORAN_VDC_VIDEN,ZORAN_VDC);
- }
-
- /*
- * leave overlaying on, but turn interrupts off.
- */
- zrand(~ZORAN_ICR_EN,ZORAN_ICR);
- return;
- }
-
- /* do we have any VBI idle time processing? */
- if (test_bit(STATE_VBI, &ztv->state))
- {
- struct vidinfo* item;
- struct vidinfo* lastitem;
-
- /* protect the workqueue */
- write_lock(&ztv->lock);
- lastitem = ztv->workqueue;
- if (lastitem)
- while (lastitem->next) lastitem = lastitem->next;
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
- if (item->next == 0 && item->status == FBUFFER_FREE)
- {
-DEBUG(printk(CARD_DEBUG "%p added to queue\n",CARD,item));
- item->status = FBUFFER_BUSY;
- if (!lastitem)
- ztv->workqueue = item;
- else
- lastitem->next = item;
- lastitem = item;
- }
- write_unlock(&ztv->lock);
- if (ztv->workqueue)
- goto again; /* hey, _i_ graduated :) */
- }
-
- /*
- * Then we must be realy IDLE
- */
-DEBUG(printk(CARD_DEBUG "turning off\n",CARD));
- /* nothing further to do, disable DMA and further IRQs */
- zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC);
- zrand(~ZORAN_ICR_EN,ZORAN_ICR);
-}
-
-static
-void zoran_irq(int irq, void *dev_id)
-{
- u32 stat,estat;
- int count = 0;
- struct zoran *ztv = dev_id;
-
- UNUSED(irq);
- for (;;) {
- /* get/clear interrupt status bits */
- stat=zrread(ZORAN_ISR);
- estat=stat & zrread(ZORAN_ICR);
- if (!estat)
- return;
- zrwrite(estat,ZORAN_ISR);
- IDEBUG(printk(CARD_DEBUG "estat %08x\n",CARD,estat));
- IDEBUG(printk(CARD_DEBUG " stat %08x\n",CARD,stat));
-
- if (estat & ZORAN_ISR_CODE)
- {
- IDEBUG(printk(CARD_DEBUG "CodReplIRQ\n",CARD));
- }
- if (estat & ZORAN_ISR_GIRQ0)
- {
- IDEBUG(printk(CARD_DEBUG "GIRQ0\n",CARD));
- if (!ztv->card->usegirq1)
- reap_states(ztv);
- }
- if (estat & ZORAN_ISR_GIRQ1)
- {
- IDEBUG(printk(CARD_DEBUG "GIRQ1\n",CARD));
- if (ztv->card->usegirq1)
- reap_states(ztv);
- }
-
- count++;
- if (count > 10)
- printk(CARD_ERR "irq loop %d (%x)\n",CARD,count,estat);
- if (count > 20)
- {
- zrwrite(0, ZORAN_ICR);
- printk(CARD_ERR "IRQ lockup, cleared int mask\n",CARD);
- }
- }
-}
-
-static
-int zoran_muxsel(struct zoran* ztv, int channel, int norm)
-{
- int rv;
-
- /* set the new video norm */
- rv = i2c_control_device(&(ztv->i2c), I2C_DRIVERID_VIDEODECODER, DECODER_SET_NORM, &norm);
- if (rv)
- return rv;
- ztv->norm = norm;
-
- /* map the given channel to the cards decoder's channel */
- channel = ztv->card->video_mux[channel] & CHANNEL_MASK;
-
- /* set the new channel */
- rv = i2c_control_device(&(ztv->i2c), I2C_DRIVERID_VIDEODECODER, DECODER_SET_INPUT, &channel);
- return rv;
-}
-
-/* Tell the interrupt handler what to to. */
-static
-void zoran_cap(struct zoran* ztv, int on)
-{
-DEBUG(printk(CARD_DEBUG "zoran_cap(%d) state=%x\n",CARD,on,ztv->state));
-
- if (on) {
- ztv->running = 1;
-
- /*
- * turn interrupts (back) on. The DMA will be enabled
- * inside the irq handler when it detects a restart.
- */
- zror(ZORAN_ICR_EN,ZORAN_ICR);
- }
- else {
- /*
- * turn both interrupts and DMA off
- */
- zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC);
- zrand(~ZORAN_ICR_EN,ZORAN_ICR);
-
- ztv->running = 0;
- }
-}
-
-static ulong dmask[] = {
- 0xFFFFFFFF, 0xFFFFFFFE, 0xFFFFFFFC, 0xFFFFFFF8,
- 0xFFFFFFF0, 0xFFFFFFE0, 0xFFFFFFC0, 0xFFFFFF80,
- 0xFFFFFF00, 0xFFFFFE00, 0xFFFFFC00, 0xFFFFF800,
- 0xFFFFF000, 0xFFFFE000, 0xFFFFC000, 0xFFFF8000,
- 0xFFFF0000, 0xFFFE0000, 0xFFFC0000, 0xFFF80000,
- 0xFFF00000, 0xFFE00000, 0xFFC00000, 0xFF800000,
- 0xFF000000, 0xFE000000, 0xFC000000, 0xF8000000,
- 0xF0000000, 0xE0000000, 0xC0000000, 0x80000000
-};
-
-static
-void zoran_built_overlay(struct zoran* ztv, int count, struct video_clip *vcp)
-{
- ulong* mtop;
- int ystep = (ztv->vidXshift + ztv->vidWidth+31)/32; /* next DWORD */
- int i;
-
-DEBUG(printk(KERN_DEBUG " overlay at %p, ystep=%d, clips=%d\n",ztv->overinfo.overlay,ystep,count));
-
- for (i=0; i<count; i++) {
- struct video_clip *vp = vcp+i;
- UNUSED(vp);
-DEBUG(printk(KERN_DEBUG " %d: clip(%d,%d,%d,%d)\n", i,vp->x,vp->y,vp->width,vp->height));
- }
-
- /*
- * activate the visible portion of the screen
- * Note we take some shortcuts here, because we
- * know the width can never be < 32. (I.e. a DWORD)
- * We also assume the overlay starts somewhere in
- * the FIRST dword.
- */
- {
- int start = ztv->vidXshift;
- ulong firstd = dmask[start];
- ulong lastd = ~dmask[(start + ztv->overinfo.w) & 31];
- mtop = ztv->overinfo.overlay;
- for (i=0; i<ztv->overinfo.h; i++) {
- int w = ztv->vidWidth;
- ulong* line = mtop;
- if (start & 31) {
- *line++ = firstd;
- w -= 32-(start&31);
- }
- memset(line, ~0, w/8);
- if (w & 31)
- line[w/32] = lastd;
- mtop += ystep;
- }
- }
-
- /* process clipping regions */
- for (i=0; i<count; i++) {
- int h;
- if (vcp->x < 0 || (uint)vcp->x > ztv->overinfo.w ||
- vcp->y < 0 || vcp->y > ztv->overinfo.h ||
- vcp->width < 0 || (uint)(vcp->x+vcp->width) > ztv->overinfo.w ||
- vcp->height < 0 || (vcp->y+vcp->height) > ztv->overinfo.h)
- {
- DEBUG(printk(CARD_DEBUG "invalid clipzone (%d,%d,%d,%d) not in (0,0,%d,%d), adapting\n",CARD,vcp->x,vcp->y,vcp->width,vcp->height,ztv->overinfo.w,ztv->overinfo.h));
- if (vcp->x < 0) vcp->x = 0;
- if ((uint)vcp->x > ztv->overinfo.w) vcp->x = ztv->overinfo.w;
- if (vcp->y < 0) vcp->y = 0;
- if (vcp->y > ztv->overinfo.h) vcp->y = ztv->overinfo.h;
- if (vcp->width < 0) vcp->width = 0;
- if ((uint)(vcp->x+vcp->width) > ztv->overinfo.w) vcp->width = ztv->overinfo.w - vcp->x;
- if (vcp->height < 0) vcp->height = 0;
- if (vcp->y+vcp->height > ztv->overinfo.h) vcp->height = ztv->overinfo.h - vcp->y;
-// continue;
- }
-
- mtop = &ztv->overinfo.overlay[vcp->y*ystep];
- for (h=0; h<=vcp->height; h++) {
- int w;
- int x = ztv->vidXshift + vcp->x;
- for (w=0; w<=vcp->width; w++) {
- clear_bit(x&31, &mtop[x/32]);
- x++;
- }
- mtop += ystep;
- }
- ++vcp;
- }
-
- mtop = ztv->overinfo.overlay;
- zrwrite(virt_to_bus(mtop), ZORAN_MTOP);
- zrwrite(virt_to_bus(mtop+ystep), ZORAN_MBOT);
- zraor((ztv->vidInterlace*ystep)<<0,~ZORAN_OCR_MASKSTRIDE,ZORAN_OCR);
-}
-
-struct tvnorm
-{
- u16 Wt, Wa, Ht, Ha, HStart, VStart;
-};
-
-static struct tvnorm tvnorms[] = {
- /* PAL-BDGHI */
-/* { 864, 720, 625, 576, 131, 21 },*/
-/*00*/ { 864, 768, 625, 576, 81, 17 },
- /* NTSC */
-/*01*/ { 858, 720, 525, 480, 121, 10 },
- /* SECAM */
-/*02*/ { 864, 720, 625, 576, 131, 21 },
- /* BW50 */
-/*03*/ { 864, 720, 625, 576, 131, 21 },
- /* BW60 */
-/*04*/ { 858, 720, 525, 480, 121, 10 }
-};
-#define TVNORMS (sizeof(tvnorms)/sizeof(tvnorm))
-
-/*
- * Program the chip for a setup as described in the vidinfo struct.
- *
- * Side-effects: calculates vidXshift, vidInterlace,
- * vidHeight, vidWidth which are used in a later stage
- * to calculate the overlay mask
- *
- * This is an internal function, as such it does not check the
- * validity of the struct members... Spectaculair crashes will
- * follow /very/ quick when you're wrong and the chip right :)
- */
-static
-void zoran_set_geo(struct zoran* ztv, struct vidinfo* i)
-{
- ulong top, bot;
- int stride;
- int winWidth, winHeight;
- int maxWidth, maxHeight, maxXOffset, maxYOffset;
- long vfec;
-
-DEBUG(printk(CARD_DEBUG "set_geo(rect=(%d,%d,%d,%d), norm=%d, format=%d, bpp=%d, bpl=%d, busadr=%lx, overlay=%p)\n",CARD,i->x,i->y,i->w,i->h,ztv->norm,i->format,i->bpp,i->bpl,i->busadr,i->overlay));
-
- /*
- * make sure the DMA transfers are inhibited during our
- * reprogramming of the chip
- */
- zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC);
-
- maxWidth = tvnorms[ztv->norm].Wa;
- maxHeight = tvnorms[ztv->norm].Ha/2;
- maxXOffset = tvnorms[ztv->norm].HStart;
- maxYOffset = tvnorms[ztv->norm].VStart;
-
- /* setup vfec register (keep ExtFl,TopField and VCLKPol settings) */
- vfec = (zrread(ZORAN_VFEC) & (ZORAN_VFEC_EXTFL|ZORAN_VFEC_TOPFIELD|ZORAN_VFEC_VCLKPOL)) |
- (palette2fmt[i->format].mode & (ZORAN_VFEC_RGB|ZORAN_VFEC_ERRDIF|ZORAN_VFEC_LE|ZORAN_VFEC_PACK24));
-
- /*
- * Set top, bottom ptrs. Since these must be DWORD aligned,
- * possible adjust the x and the width of the window.
- * so the endposition stay the same. The vidXshift will make
- * sure we are not writing pixels before the requested x.
- */
- ztv->vidXshift = 0;
- winWidth = i->w;
- if (winWidth < 0)
- winWidth = -winWidth;
- top = i->busadr + i->x*i->bpp + i->y*i->bpl;
- if (top & 3) {
- ztv->vidXshift = (top & 3) / i->bpp;
- winWidth += ztv->vidXshift;
- DEBUG(printk(KERN_DEBUG " window-x shifted %d pixels left\n",ztv->vidXshift));
- top &= ~3;
- }
-
- /*
- * bottom points to next frame but in interleaved mode we want
- * to 'mix' the 2 frames to one capture, so 'bot' points to one
- * (physical) line below the top line.
- */
- bot = top + i->bpl;
- zrwrite(top,ZORAN_VTOP);
- zrwrite(bot,ZORAN_VBOT);
-
- /*
- * Make sure the winWidth is DWORD aligned too,
- * thereby automaticly making sure the stride to the
- * next line is DWORD aligned too (as required by spec).
- */
- if ((winWidth*i->bpp) & 3) {
-DEBUG(printk(KERN_DEBUG " window-width enlarged by %d pixels\n",(winWidth*i->bpp) & 3));
- winWidth += (winWidth*i->bpp) & 3;
- }
-
- /* determine the DispMode and stride */
- if (i->h >= 0 && i->h <= maxHeight) {
- /* single frame grab suffices for this height. */
- vfec |= ZORAN_VFEC_DISPMOD;
- ztv->vidInterlace = 0;
- stride = i->bpl - (winWidth*i->bpp);
- winHeight = i->h;
- }
- else {
- /* interleaving needed for this height */
- ztv->vidInterlace = 1;
- stride = i->bpl*2 - (winWidth*i->bpp);
- winHeight = i->h/2;
- }
- if (winHeight < 0) /* can happen for VBI! */
- winHeight = -winHeight;
-
- /* safety net, sometimes bpl is too short??? */
- if (stride<0) {
-DEBUG(printk(CARD_DEBUG "WARNING stride = %d\n",CARD,stride));
- stride = 0;
- }
-
- zraor((winHeight<<12)|(winWidth<<0),~(ZORAN_VDC_VIDWINHT|ZORAN_VDC_VIDWINWID), ZORAN_VDC);
- zraor(stride<<16,~ZORAN_VSTR_DISPSTRIDE,ZORAN_VSTR);
-
- /* remember vidWidth, vidHeight for overlay calculations */
- ztv->vidWidth = winWidth;
- ztv->vidHeight = winHeight;
-DEBUG(printk(KERN_DEBUG " top=%08lx, bottom=%08lx\n",top,bot));
-DEBUG(printk(KERN_DEBUG " winWidth=%d, winHeight=%d\n",winWidth,winHeight));
-DEBUG(printk(KERN_DEBUG " maxWidth=%d, maxHeight=%d\n",maxWidth,maxHeight));
-DEBUG(printk(KERN_DEBUG " stride=%d\n",stride));
-
- /*
- * determine horizontal scales and crops
- */
- if (i->w < 0) {
- int Hstart = 1;
- int Hend = Hstart + winWidth;
-DEBUG(printk(KERN_DEBUG " Y: scale=0, start=%d, end=%d\n", Hstart, Hend));
- zraor((Hstart<<10)|(Hend<<0),~(ZORAN_VFEH_HSTART|ZORAN_VFEH_HEND),ZORAN_VFEH);
- }
- else {
- int Wa = maxWidth;
- int X = (winWidth*64+Wa-1)/Wa;
- int We = winWidth*64/X;
- int HorDcm = 64-X;
- int hcrop1 = 2*(Wa-We)/4;
- /*
- * BUGFIX: Juha Nurmela <junki@qn-lpr2-165.quicknet.inet.fi>
- * found the solution to the color phase shift.
- * See ChangeLog for the full explanation)
- */
- int Hstart = (maxXOffset + hcrop1) | 1;
- int Hend = Hstart + We - 1;
-
-DEBUG(printk(KERN_DEBUG " X: scale=%d, start=%d, end=%d\n", HorDcm, Hstart, Hend));
-
- zraor((Hstart<<10)|(Hend<<0),~(ZORAN_VFEH_HSTART|ZORAN_VFEH_HEND),ZORAN_VFEH);
- vfec |= HorDcm<<14;
-
- if (HorDcm<16)
- vfec |= ZORAN_VFEC_HFILTER_1; /* no filter */
- else if (HorDcm<32)
- vfec |= ZORAN_VFEC_HFILTER_3; /* 3 tap filter */
- else if (HorDcm<48)
- vfec |= ZORAN_VFEC_HFILTER_4; /* 4 tap filter */
- else vfec |= ZORAN_VFEC_HFILTER_5; /* 5 tap filter */
- }
-
- /*
- * Determine vertical scales and crops
- *
- * when height is negative, we want to read starting at line 0
- * One day someone might need access to these lines...
- */
- if (i->h < 0) {
- int Vstart = 0;
- int Vend = Vstart + winHeight;
-DEBUG(printk(KERN_DEBUG " Y: scale=0, start=%d, end=%d\n", Vstart, Vend));
- zraor((Vstart<<10)|(Vend<<0),~(ZORAN_VFEV_VSTART|ZORAN_VFEV_VEND),ZORAN_VFEV);
- }
- else {
- int Ha = maxHeight;
- int Y = (winHeight*64+Ha-1)/Ha;
- int He = winHeight*64/Y;
- int VerDcm = 64-Y;
- int vcrop1 = 2*(Ha-He)/4;
- int Vstart = maxYOffset + vcrop1;
- int Vend = Vstart + He - 1;
-
-DEBUG(printk(KERN_DEBUG " Y: scale=%d, start=%d, end=%d\n", VerDcm, Vstart, Vend));
- zraor((Vstart<<10)|(Vend<<0),~(ZORAN_VFEV_VSTART|ZORAN_VFEV_VEND),ZORAN_VFEV);
- vfec |= VerDcm<<8;
- }
-
-DEBUG(printk(KERN_DEBUG " F: format=%d(=%s)\n",i->format,palette2fmt[i->format].name));
-
- /* setup the requested format */
- zrwrite(vfec, ZORAN_VFEC);
-}
-
-static
-void zoran_common_open(struct zoran* ztv, int flags)
-{
- UNUSED(flags);
-
- /* already opened? */
- if (ztv->users++ != 0)
- return;
-
- /* unmute audio */
- /* /what/ audio? */
-
- ztv->state = 0;
-
- /* setup the encoder to the initial values */
- ztv->picture.colour=254<<7;
- ztv->picture.brightness=128<<8;
- ztv->picture.hue=128<<8;
- ztv->picture.contrast=216<<7;
- i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_SET_PICTURE, &ztv->picture);
-
- /* default to the composite input since my camera is there */
- zoran_muxsel(ztv, 0, VIDEO_MODE_PAL);
-}
-
-static
-void zoran_common_close(struct zoran* ztv)
-{
- if (--ztv->users != 0)
- return;
-
- /* mute audio */
- /* /what/ audio? */
-
- /* stop the chip */
- zoran_cap(ztv, 0);
-}
-
-/*
- * Open a zoran card. Right now the flags are just a hack
- */
-static int zoran_open(struct video_device *dev, int flags)
-{
- struct zoran *ztv = (struct zoran*)dev;
- struct vidinfo* item;
- char* pos;
-
- DEBUG(printk(CARD_DEBUG "open(dev,%d)\n",CARD,flags));
-
- /*********************************************
- * We really should be doing lazy allocing...
- *********************************************/
- /* allocate a frame buffer */
- if (!ztv->fbuffer)
- ztv->fbuffer = bmalloc(ZORAN_MAX_FBUFSIZE);
- if (!ztv->fbuffer) {
- /* could not get a buffer, bail out */
- return -ENOBUFS;
- }
- /* at this time we _always_ have a framebuffer */
- memset(ztv->fbuffer,0,ZORAN_MAX_FBUFSIZE);
-
- if (!ztv->overinfo.overlay)
- ztv->overinfo.overlay = kmalloc(1024*1024/8, GFP_KERNEL);
- if (!ztv->overinfo.overlay) {
- /* could not get an overlay buffer, bail out */
- bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE);
- return -ENOBUFS;
- }
- /* at this time we _always_ have a overlay */
-
- /* clear buffer status, and give them a DMAable address */
- pos = ztv->fbuffer;
- for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++)
- {
- item->status = FBUFFER_FREE;
- item->memadr = pos;
- item->busadr = virt_to_bus(pos);
- pos += ZORAN_MAX_FBUFFER;
- }
-
- /* do the common part of all open's */
- zoran_common_open(ztv, flags);
-
- return 0;
-}
-
-static
-void zoran_close(struct video_device* dev)
-{
- struct zoran *ztv = (struct zoran*)dev;
-
- DEBUG(printk(CARD_DEBUG "close(dev)\n",CARD));
-
- /* driver specific closure */
- clear_bit(STATE_OVERLAY, &ztv->state);
-
- zoran_common_close(ztv);
-
- /*
- * This is sucky but right now I can't find a good way to
- * be sure its safe to free the buffer. We wait 5-6 fields
- * which is more than sufficient to be sure.
- */
- msleep(100); /* Wait 1/10th of a second */
-
- /* free the allocated framebuffer */
- bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE);
- ztv->fbuffer = 0;
- kfree(ztv->overinfo.overlay);
- ztv->overinfo.overlay = 0;
-
-}
-
-/*
- * This read function could be used reentrant in a SMP situation.
- *
- * This is made possible by the spinlock which is kept till we
- * found and marked a buffer for our own use. The lock must
- * be released as soon as possible to prevent lock contention.
- */
-static
-long zoran_read(struct video_device* dev, char* buf, unsigned long count, int nonblock)
-{
- struct zoran *ztv = (struct zoran*)dev;
- unsigned long max;
- struct vidinfo* unused = 0;
- struct vidinfo* done = 0;
-
- DEBUG(printk(CARD_DEBUG "zoran_read(%p,%ld,%d)\n",CARD,buf,count,nonblock));
-
- /* find ourself a free or completed buffer */
- for (;;) {
- struct vidinfo* item;
-
- write_lock_irq(&ztv->lock);
- for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++)
- {
- if (!unused && item->status == FBUFFER_FREE)
- unused = item;
- if (!done && item->status == FBUFFER_DONE)
- done = item;
- }
- if (done || unused)
- break;
-
- /* no more free buffers, wait for them. */
- write_unlock_irq(&ztv->lock);
- if (nonblock)
- return -EWOULDBLOCK;
- interruptible_sleep_on(&ztv->grabq);
- if (signal_pending(current))
- return -EINTR;
- }
-
- /* Do we have 'ready' data? */
- if (!done) {
- /* no? than this will take a while... */
- if (nonblock) {
- write_unlock_irq(&ztv->lock);
- return -EWOULDBLOCK;
- }
-
- /* mark the unused buffer as wanted */
- unused->status = FBUFFER_BUSY;
- unused->w = 320;
- unused->h = 240;
- unused->format = VIDEO_PALETTE_RGB24;
- unused->bpp = palette2fmt[unused->format].bpp;
- unused->bpl = unused->w * unused->bpp;
- unused->next = 0;
- { /* add to tail of queue */
- struct vidinfo* oldframe = ztv->workqueue;
- if (!oldframe) ztv->workqueue = unused;
- else {
- while (oldframe->next) oldframe = oldframe->next;
- oldframe->next = unused;
- }
- }
- write_unlock_irq(&ztv->lock);
-
- /* tell the state machine we want it filled /NOW/ */
- zoran_cap(ztv, 1);
-
- /* wait till this buffer gets grabbed */
- wait_event_interruptible(ztv->grabq,
- (unused->status != FBUFFER_BUSY));
- /* see if a signal did it */
- if (signal_pending(current))
- return -EINTR;
- done = unused;
- }
- else
- write_unlock_irq(&ztv->lock);
-
- /* Yes! we got data! */
- max = done->bpl * done->h;
- if (count > max)
- count = max;
- if (copy_to_user((void*)buf, done->memadr, count))
- count = -EFAULT;
-
- /* keep the engine running */
- done->status = FBUFFER_FREE;
-// zoran_cap(ztv,1);
-
- /* tell listeners this buffer became free */
- wake_up_interruptible(&ztv->grabq);
-
- /* goodbye */
- DEBUG(printk(CARD_DEBUG "zoran_read() returns %lu\n",CARD,count));
- return count;
-}
-
-static
-long zoran_write(struct video_device* dev, const char* buf, unsigned long count, int nonblock)
-{
- struct zoran *ztv = (struct zoran *)dev;
- UNUSED(ztv); UNUSED(dev); UNUSED(buf); UNUSED(count); UNUSED(nonblock);
- DEBUG(printk(CARD_DEBUG "zoran_write\n",CARD));
- return -EINVAL;
-}
-
-static
-unsigned int zoran_poll(struct video_device *dev, struct file *file, poll_table *wait)
-{
- struct zoran *ztv = (struct zoran *)dev;
- struct vidinfo* item;
- unsigned int mask = 0;
-
- poll_wait(file, &ztv->grabq, wait);
-
- for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++)
- if (item->status == FBUFFER_DONE)
- {
- mask |= (POLLIN | POLLRDNORM);
- break;
- }
-
- DEBUG(printk(CARD_DEBUG "zoran_poll()=%x\n",CARD,mask));
-
- return mask;
-}
-
-/* append a new clipregion to the vector of video_clips */
-static
-void new_clip(struct video_window* vw, struct video_clip* vcp, int x, int y, int w, int h)
-{
- vcp[vw->clipcount].x = x;
- vcp[vw->clipcount].y = y;
- vcp[vw->clipcount].width = w;
- vcp[vw->clipcount].height = h;
- vw->clipcount++;
-}
-
-static
-int zoran_ioctl(struct video_device* dev, unsigned int cmd, void *arg)
-{
- struct zoran* ztv = (struct zoran*)dev;
-
- switch (cmd) {
- case VIDIOCGCAP:
- {
- struct video_capability c;
- DEBUG(printk(CARD_DEBUG "VIDIOCGCAP\n",CARD));
-
- strcpy(c.name,ztv->video_dev.name);
- c.type = VID_TYPE_CAPTURE|
- VID_TYPE_OVERLAY|
- VID_TYPE_CLIPPING|
- VID_TYPE_FRAMERAM|
- VID_TYPE_SCALES;
- if (ztv->have_tuner)
- c.type |= VID_TYPE_TUNER;
- if (pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))
- c.type &= ~VID_TYPE_OVERLAY;
- if (ztv->have_decoder) {
- c.channels = ztv->card->video_inputs;
- c.audios = ztv->card->audio_inputs;
- } else
- /* no decoder -> no channels */
- c.channels = c.audios = 0;
- c.maxwidth = 768;
- c.maxheight = 576;
- c.minwidth = 32;
- c.minheight = 32;
- if (copy_to_user(arg,&c,sizeof(c)))
- return -EFAULT;
- break;
- }
-
- case VIDIOCGCHAN:
- {
- struct video_channel v;
- int mux;
- if (copy_from_user(&v, arg,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCGCHAN(%d)\n",CARD,v.channel));
- v.flags=VIDEO_VC_AUDIO
-#ifdef VIDEO_VC_NORM
- |VIDEO_VC_NORM
-#endif
- ;
- v.tuners=0;
- v.type=VIDEO_TYPE_CAMERA;
-#ifdef I_EXPECT_POSSIBLE_NORMS_IN_THE_API
- v.norm=VIDEO_MODE_PAL|
- VIDEO_MODE_NTSC|
- VIDEO_MODE_SECAM;
-#else
- v.norm=VIDEO_MODE_PAL;
-#endif
- /* too many inputs? no decoder -> no channels */
- if (!ztv->have_decoder || v.channel < 0 || v.channel >= ztv->card->video_inputs)
- return -EINVAL;
-
- /* now determine the name of the channel */
- mux = ztv->card->video_mux[v.channel];
- if (mux & IS_TUNER) {
- /* lets assume only one tuner, yes? */
- strcpy(v.name,"Television");
- v.type = VIDEO_TYPE_TV;
- if (ztv->have_tuner) {
- v.flags |= VIDEO_VC_TUNER;
- v.tuners = 1;
- }
- }
- else if (mux & IS_SVHS)
- sprintf(v.name,"S-Video-%d",v.channel);
- else
- sprintf(v.name,"CVBS-%d",v.channel);
-
- if (copy_to_user(arg,&v,sizeof(v)))
- return -EFAULT;
- break;
- }
- case VIDIOCSCHAN:
- { /* set video channel */
- struct video_channel v;
- if (copy_from_user(&v, arg,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSCHAN(%d,%d)\n",CARD,v.channel,v.norm));
-
- /* too many inputs? no decoder -> no channels */
- if (!ztv->have_decoder || v.channel >= ztv->card->video_inputs || v.channel < 0)
- return -EINVAL;
-
- if (v.norm != VIDEO_MODE_PAL &&
- v.norm != VIDEO_MODE_NTSC &&
- v.norm != VIDEO_MODE_SECAM &&
- v.norm != VIDEO_MODE_AUTO)
- return -EOPNOTSUPP;
-
- /* make it happen, nr1! */
- return zoran_muxsel(ztv,v.channel,v.norm);
- }
-
- case VIDIOCGTUNER:
- {
- struct video_tuner v;
- if (copy_from_user(&v, arg,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCGTUNER(%d)\n",CARD,v.tuner));
-
- /* Only no or one tuner for now */
- if (!ztv->have_tuner || v.tuner)
- return -EINVAL;
-
- strcpy(v.name,"Television");
- v.rangelow = 0;
- v.rangehigh = ~0;
- v.flags = VIDEO_TUNER_PAL|VIDEO_TUNER_NTSC|VIDEO_TUNER_SECAM;
- v.mode = ztv->norm;
- v.signal = 0xFFFF; /* unknown */
-
- if (copy_to_user(arg,&v,sizeof(v)))
- return -EFAULT;
- break;
- }
- case VIDIOCSTUNER:
- {
- struct video_tuner v;
- if (copy_from_user(&v, arg, sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSTUNER(%d,%d)\n",CARD,v.tuner,v.mode));
-
- /* Only no or one tuner for now */
- if (!ztv->have_tuner || v.tuner)
- return -EINVAL;
-
- /* and it only has certain valid modes */
- if( v.mode != VIDEO_MODE_PAL &&
- v.mode != VIDEO_MODE_NTSC &&
- v.mode != VIDEO_MODE_SECAM)
- return -EOPNOTSUPP;
-
- /* engage! */
- return zoran_muxsel(ztv,v.tuner,v.mode);
- }
-
- case VIDIOCGPICT:
- {
- struct video_picture p = ztv->picture;
- DEBUG(printk(CARD_DEBUG "VIDIOCGPICT\n",CARD));
- p.depth = ztv->depth;
- switch (p.depth) {
- case 8: p.palette=VIDEO_PALETTE_YUV422;
- break;
- case 15: p.palette=VIDEO_PALETTE_RGB555;
- break;
- case 16: p.palette=VIDEO_PALETTE_RGB565;
- break;
- case 24: p.palette=VIDEO_PALETTE_RGB24;
- break;
- case 32: p.palette=VIDEO_PALETTE_RGB32;
- break;
- }
- if (copy_to_user(arg, &p, sizeof(p)))
- return -EFAULT;
- break;
- }
- case VIDIOCSPICT:
- {
- struct video_picture p;
- if (copy_from_user(&p, arg,sizeof(p)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSPICT(%d,%d,%d,%d,%d,%d,%d)\n",CARD,p.brightness,p.hue,p.colour,p.contrast,p.whiteness,p.depth,p.palette));
-
- /* depth must match with framebuffer */
- if (p.depth != ztv->depth)
- return -EINVAL;
-
- /* check if palette matches this bpp */
- if (p.palette>NRPALETTES ||
- palette2fmt[p.palette].bpp != ztv->overinfo.bpp)
- return -EINVAL;
-
- write_lock_irq(&ztv->lock);
- ztv->overinfo.format = p.palette;
- ztv->picture = p;
- write_unlock_irq(&ztv->lock);
-
- /* tell the decoder */
- i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_SET_PICTURE, &p);
- break;
- }
-
- case VIDIOCGWIN:
- {
- struct video_window vw;
- DEBUG(printk(CARD_DEBUG "VIDIOCGWIN\n",CARD));
- read_lock(&ztv->lock);
- vw.x = ztv->overinfo.x;
- vw.y = ztv->overinfo.y;
- vw.width = ztv->overinfo.w;
- vw.height = ztv->overinfo.h;
- vw.chromakey= 0;
- vw.flags = 0;
- if (ztv->vidInterlace)
- vw.flags|=VIDEO_WINDOW_INTERLACE;
- read_unlock(&ztv->lock);
- if (copy_to_user(arg,&vw,sizeof(vw)))
- return -EFAULT;
- break;
- }
- case VIDIOCSWIN:
- {
- struct video_window vw;
- struct video_clip *vcp;
- int on;
- if (copy_from_user(&vw,arg,sizeof(vw)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSWIN(%d,%d,%d,%d,%x,%d)\n",CARD,vw.x,vw.y,vw.width,vw.height,vw.flags,vw.clipcount));
-
- if (vw.flags)
- return -EINVAL;
-
- if (vw.clipcount <0 || vw.clipcount>256)
- return -EDOM; /* Too many! */
-
- /*
- * Do any clips.
- */
- vcp = vmalloc(sizeof(struct video_clip)*(vw.clipcount+4));
- if (vcp==NULL)
- return -ENOMEM;
- if (vw.clipcount && copy_from_user(vcp,vw.clips,sizeof(struct video_clip)*vw.clipcount)) {
- vfree(vcp);
- return -EFAULT;
- }
-
- on = ztv->running;
- if (on)
- zoran_cap(ztv, 0);
-
- /*
- * strange, it seems xawtv sometimes calls us with 0
- * width and/or height. Ignore these values
- */
- if (vw.x == 0)
- vw.x = ztv->overinfo.x;
- if (vw.y == 0)
- vw.y = ztv->overinfo.y;
-
- /* by now we are committed to the new data... */
- write_lock_irq(&ztv->lock);
- ztv->overinfo.x = vw.x;
- ztv->overinfo.y = vw.y;
- ztv->overinfo.w = vw.width;
- ztv->overinfo.h = vw.height;
- write_unlock_irq(&ztv->lock);
-
- /*
- * Impose display clips
- */
- if (vw.x+vw.width > ztv->swidth)
- new_clip(&vw, vcp, ztv->swidth-vw.x, 0, vw.width-1, vw.height-1);
- if (vw.y+vw.height > ztv->sheight)
- new_clip(&vw, vcp, 0, ztv->sheight-vw.y, vw.width-1, vw.height-1);
-
- /* built the requested clipping zones */
- zoran_set_geo(ztv, &ztv->overinfo);
- zoran_built_overlay(ztv, vw.clipcount, vcp);
- vfree(vcp);
-
- /* if we were on, restart the video engine */
- if (on)
- zoran_cap(ztv, 1);
- break;
- }
-
- case VIDIOCCAPTURE:
- {
- int v;
- if (get_user(v, (int *)arg))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCCAPTURE(%d)\n",CARD,v));
-
- if (v==0) {
- clear_bit(STATE_OVERLAY, &ztv->state);
- zoran_cap(ztv, 1);
- }
- else {
- /* is VIDIOCSFBUF, VIDIOCSWIN done? */
- if (ztv->overinfo.busadr==0 || ztv->overinfo.w==0 || ztv->overinfo.h==0)
- return -EINVAL;
-
- set_bit(STATE_OVERLAY, &ztv->state);
- zoran_cap(ztv, 1);
- }
- break;
- }
-
- case VIDIOCGFBUF:
- {
- struct video_buffer v;
- DEBUG(printk(CARD_DEBUG "VIDIOCGFBUF\n",CARD));
- read_lock(&ztv->lock);
- v.base = (void *)ztv->overinfo.busadr;
- v.height = ztv->sheight;
- v.width = ztv->swidth;
- v.depth = ztv->depth;
- v.bytesperline = ztv->overinfo.bpl;
- read_unlock(&ztv->lock);
- if(copy_to_user(arg, &v,sizeof(v)))
- return -EFAULT;
- break;
- }
- case VIDIOCSFBUF:
- {
- struct video_buffer v;
- if(!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (pcipci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))
- return -ENXIO;
- if (copy_from_user(&v, arg,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSFBUF(%p,%d,%d,%d,%d)\n",CARD,v.base, v.width,v.height,v.depth,v.bytesperline));
-
- if (v.depth!=15 && v.depth!=16 && v.depth!=24 && v.depth!=32)
- return -EINVAL;
- if (v.bytesperline<1)
- return -EINVAL;
- if (ztv->running)
- return -EBUSY;
- write_lock_irq(&ztv->lock);
- ztv->overinfo.busadr = (ulong)v.base;
- ztv->sheight = v.height;
- ztv->swidth = v.width;
- ztv->depth = v.depth; /* bits per pixel */
- ztv->overinfo.bpp = ((v.depth+1)&0x38)/8;/* bytes per pixel */
- ztv->overinfo.bpl = v.bytesperline; /* bytes per line */
- write_unlock_irq(&ztv->lock);
- break;
- }
-
- case VIDIOCKEY:
- {
- /* Will be handled higher up .. */
- break;
- }
-
- case VIDIOCSYNC:
- {
- int i;
- if (get_user(i, (int *) arg))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDEOCSYNC(%d)\n",CARD,i));
- if (i<0 || i>ZORAN_MAX_FBUFFERS)
- return -EINVAL;
- switch (ztv->grabinfo[i].status) {
- case FBUFFER_FREE:
- return -EINVAL;
- case FBUFFER_BUSY:
- /* wait till this buffer gets grabbed */
- wait_event_interruptible(ztv->grabq,
- (ztv->grabinfo[i].status != FBUFFER_BUSY));
- /* see if a signal did it */
- if (signal_pending(current))
- return -EINTR;
- /* don't fall through; a DONE buffer is not UNUSED */
- break;
- case FBUFFER_DONE:
- ztv->grabinfo[i].status = FBUFFER_FREE;
- /* tell ppl we have a spare buffer */
- wake_up_interruptible(&ztv->grabq);
- break;
- }
- DEBUG(printk(CARD_DEBUG "VIDEOCSYNC(%d) returns\n",CARD,i));
- break;
- }
-
- case VIDIOCMCAPTURE:
- {
- struct video_mmap vm;
- struct vidinfo* frame;
- if (copy_from_user(&vm,arg,sizeof(vm)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCMCAPTURE(%d,(%d,%d),%d)\n",CARD,vm.frame,vm.width,vm.height,vm.format));
- if (vm.frame<0 || vm.frame>ZORAN_MAX_FBUFFERS ||
- vm.width<32 || vm.width>768 ||
- vm.height<32 || vm.height>576 ||
- vm.format>NRPALETTES ||
- palette2fmt[vm.format].mode == 0)
- return -EINVAL;
-
- /* we are allowed to take over UNUSED and DONE buffers */
- frame = &ztv->grabinfo[vm.frame];
- if (frame->status == FBUFFER_BUSY)
- return -EBUSY;
-
- /* setup the other parameters if they are given */
- write_lock_irq(&ztv->lock);
- frame->w = vm.width;
- frame->h = vm.height;
- frame->format = vm.format;
- frame->bpp = palette2fmt[frame->format].bpp;
- frame->bpl = frame->w*frame->bpp;
- frame->status = FBUFFER_BUSY;
- frame->next = 0;
- { /* add to tail of queue */
- struct vidinfo* oldframe = ztv->workqueue;
- if (!oldframe) ztv->workqueue = frame;
- else {
- while (oldframe->next) oldframe = oldframe->next;
- oldframe->next = frame;
- }
- }
- write_unlock_irq(&ztv->lock);
- zoran_cap(ztv, 1);
- break;
- }
-
- case VIDIOCGMBUF:
- {
- struct video_mbuf mb;
- int i;
- DEBUG(printk(CARD_DEBUG "VIDIOCGMBUF\n",CARD));
- mb.size = ZORAN_MAX_FBUFSIZE;
- mb.frames = ZORAN_MAX_FBUFFERS;
- for (i=0; i<ZORAN_MAX_FBUFFERS; i++)
- mb.offsets[i] = i*ZORAN_MAX_FBUFFER;
- if(copy_to_user(arg, &mb,sizeof(mb)))
- return -EFAULT;
- break;
- }
-
- case VIDIOCGUNIT:
- {
- struct video_unit vu;
- DEBUG(printk(CARD_DEBUG "VIDIOCGUNIT\n",CARD));
- vu.video = ztv->video_dev.minor;
- vu.vbi = ztv->vbi_dev.minor;
- vu.radio = VIDEO_NO_UNIT;
- vu.audio = VIDEO_NO_UNIT;
- vu.teletext = VIDEO_NO_UNIT;
- if(copy_to_user(arg, &vu,sizeof(vu)))
- return -EFAULT;
- break;
- }
-
- case VIDIOCGFREQ:
- {
- unsigned long v = ztv->tuner_freq;
- if (copy_to_user(arg,&v,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCGFREQ\n",CARD));
- break;
- }
- case VIDIOCSFREQ:
- {
- unsigned long v;
- if (copy_from_user(&v, arg, sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSFREQ\n",CARD));
-
- if (ztv->have_tuner) {
- int fixme = v;
- if (i2c_control_device(&(ztv->i2c), I2C_DRIVERID_TUNER, TUNER_SET_TVFREQ, &fixme) < 0)
- return -EAGAIN;
- }
- ztv->tuner_freq = v;
- break;
- }
-
- /* Why isn't this in the API?
- * And why doesn't it take a buffer number?
- case BTTV_FIELDNR:
- {
- unsigned long v = ztv->lastfieldnr;
- if (copy_to_user(arg,&v,sizeof(v)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "BTTV_FIELDNR\n",CARD));
- break;
- }
- */
-
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static
-int zoran_mmap(struct vm_area_struct *vma, struct video_device* dev, const char* adr, unsigned long size)
-{
- struct zoran* ztv = (struct zoran*)dev;
- unsigned long start = (unsigned long)adr;
- unsigned long pos;
-
- DEBUG(printk(CARD_DEBUG "zoran_mmap(0x%p,%ld)\n",CARD,adr,size));
-
- /* sanity checks */
- if (size > ZORAN_MAX_FBUFSIZE || !ztv->fbuffer)
- return -EINVAL;
-
- /* start mapping the whole shabang to user memory */
- pos = (unsigned long)ztv->fbuffer;
- while (size>0) {
- unsigned long pfn = virt_to_phys((void*)pos) >> PAGE_SHIFT;
- if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED))
- return -EAGAIN;
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- return 0;
-}
-
-static struct video_device zr36120_template=
-{
- .owner = THIS_MODULE,
- .name = "UNSET",
- .type = VID_TYPE_TUNER|VID_TYPE_CAPTURE|VID_TYPE_OVERLAY,
- .hardware = VID_HARDWARE_ZR36120,
- .open = zoran_open,
- .close = zoran_close,
- .read = zoran_read,
- .write = zoran_write,
- .poll = zoran_poll,
- .ioctl = zoran_ioctl,
- .compat_ioctl = v4l_compat_ioctl32,
- .mmap = zoran_mmap,
- .minor = -1,
-};
-
-static
-int vbi_open(struct video_device *dev, int flags)
-{
- struct zoran *ztv = dev->priv;
- struct vidinfo* item;
-
- DEBUG(printk(CARD_DEBUG "vbi_open(dev,%d)\n",CARD,flags));
-
- /*
- * During VBI device open, we continiously grab VBI-like
- * data in the vbi buffer when we have nothing to do.
- * Only when there is an explicit request for VBI data
- * (read call) we /force/ a read.
- */
-
- /* allocate buffers */
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
- {
- item->status = FBUFFER_FREE;
-
- /* alloc */
- if (!item->memadr) {
- item->memadr = bmalloc(ZORAN_VBI_BUFSIZE);
- if (!item->memadr) {
- /* could not get a buffer, bail out */
- while (item != ztv->readinfo) {
- item--;
- bfree(item->memadr, ZORAN_VBI_BUFSIZE);
- item->memadr = 0;
- item->busadr = 0;
- }
- return -ENOBUFS;
- }
- }
-
- /* determine the DMAable address */
- item->busadr = virt_to_bus(item->memadr);
- }
-
- /* do the common part of all open's */
- zoran_common_open(ztv, flags);
-
- set_bit(STATE_VBI, &ztv->state);
- /* start read-ahead */
- zoran_cap(ztv, 1);
-
- return 0;
-}
-
-static
-void vbi_close(struct video_device *dev)
-{
- struct zoran *ztv = dev->priv;
- struct vidinfo* item;
-
- DEBUG(printk(CARD_DEBUG "vbi_close(dev)\n",CARD));
-
- /* driver specific closure */
- clear_bit(STATE_VBI, &ztv->state);
-
- zoran_common_close(ztv);
-
- /*
- * This is sucky but right now I can't find a good way to
- * be sure its safe to free the buffer. We wait 5-6 fields
- * which is more than sufficient to be sure.
- */
- msleep(100); /* Wait 1/10th of a second */
-
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
- {
- if (item->memadr)
- bfree(item->memadr, ZORAN_VBI_BUFSIZE);
- item->memadr = 0;
- }
-
-}
-
-/*
- * This read function could be used reentrant in a SMP situation.
- *
- * This is made possible by the spinlock which is kept till we
- * found and marked a buffer for our own use. The lock must
- * be released as soon as possible to prevent lock contention.
- */
-static
-long vbi_read(struct video_device* dev, char* buf, unsigned long count, int nonblock)
-{
- struct zoran *ztv = dev->priv;
- unsigned long max;
- struct vidinfo* unused = 0;
- struct vidinfo* done = 0;
-
- DEBUG(printk(CARD_DEBUG "vbi_read(0x%p,%ld,%d)\n",CARD,buf,count,nonblock));
-
- /* find ourself a free or completed buffer */
- for (;;) {
- struct vidinfo* item;
-
- write_lock_irq(&ztv->lock);
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) {
- if (!unused && item->status == FBUFFER_FREE)
- unused = item;
- if (!done && item->status == FBUFFER_DONE)
- done = item;
- }
- if (done || unused)
- break;
-
- /* no more free buffers, wait for them. */
- write_unlock_irq(&ztv->lock);
- if (nonblock)
- return -EWOULDBLOCK;
- interruptible_sleep_on(&ztv->vbiq);
- if (signal_pending(current))
- return -EINTR;
- }
-
- /* Do we have 'ready' data? */
- if (!done) {
- /* no? than this will take a while... */
- if (nonblock) {
- write_unlock_irq(&ztv->lock);
- return -EWOULDBLOCK;
- }
-
- /* mark the unused buffer as wanted */
- unused->status = FBUFFER_BUSY;
- unused->next = 0;
- { /* add to tail of queue */
- struct vidinfo* oldframe = ztv->workqueue;
- if (!oldframe) ztv->workqueue = unused;
- else {
- while (oldframe->next) oldframe = oldframe->next;
- oldframe->next = unused;
- }
- }
- write_unlock_irq(&ztv->lock);
-
- /* tell the state machine we want it filled /NOW/ */
- zoran_cap(ztv, 1);
-
- /* wait till this buffer gets grabbed */
- wait_event_interruptible(ztv->vbiq,
- (unused->status != FBUFFER_BUSY));
- /* see if a signal did it */
- if (signal_pending(current))
- return -EINTR;
- done = unused;
- }
- else
- write_unlock_irq(&ztv->lock);
-
- /* Yes! we got data! */
- max = done->bpl * -done->h;
- if (count > max)
- count = max;
-
- /* check if the user gave us enough room to write the data */
- if (!access_ok(VERIFY_WRITE, buf, count)) {
- count = -EFAULT;
- goto out;
- }
-
- /*
- * Now transform/strip the data from YUV to Y-only
- * NB. Assume the Y is in the LSB of the YUV data.
- */
- {
- unsigned char* optr = buf;
- unsigned char* eptr = buf+count;
-
- /* are we beeing accessed from an old driver? */
- if (count == 2*19*2048) {
- /*
- * Extreme HACK, old VBI programs expect 2048 points
- * of data, and we only got 864 orso. Double each
- * datapoint and clear the rest of the line.
- * This way we have appear to have a
- * sample_frequency of 29.5 Mc.
- */
- int x,y;
- unsigned char* iptr = done->memadr+1;
- for (y=done->h; optr<eptr && y<0; y++)
- {
- /* copy to doubled data to userland */
- for (x=0; optr+1<eptr && x<-done->w; x++)
- {
- unsigned char a = iptr[x*2];
- __put_user(a, optr++);
- __put_user(a, optr++);
- }
- /* and clear the rest of the line */
- for (x*=2; optr<eptr && x<done->bpl; x++)
- __put_user(0, optr++);
- /* next line */
- iptr += done->bpl;
- }
- }
- else {
- /*
- * Other (probably newer) programs asked
- * us what geometry we are using, and are
- * reading the correct size.
- */
- int x,y;
- unsigned char* iptr = done->memadr+1;
- for (y=done->h; optr<eptr && y<0; y++)
- {
- /* copy to doubled data to userland */
- for (x=0; optr<eptr && x<-done->w; x++)
- __put_user(iptr[x*2], optr++);
- /* and clear the rest of the line */
- for (;optr<eptr && x<done->bpl; x++)
- __put_user(0, optr++);
- /* next line */
- iptr += done->bpl;
- }
- }
-
- /* API compliance:
- * place the framenumber (half fieldnr) in the last long
- */
- __put_user(done->fieldnr/2, ((ulong*)eptr)[-1]);
- }
-
- /* keep the engine running */
- done->status = FBUFFER_FREE;
- zoran_cap(ztv, 1);
-
- /* tell listeners this buffer just became free */
- wake_up_interruptible(&ztv->vbiq);
-
- /* goodbye */
-out:
- DEBUG(printk(CARD_DEBUG "vbi_read() returns %lu\n",CARD,count));
- return count;
-}
-
-static
-unsigned int vbi_poll(struct video_device *dev, struct file *file, poll_table *wait)
-{
- struct zoran *ztv = dev->priv;
- struct vidinfo* item;
- unsigned int mask = 0;
-
- poll_wait(file, &ztv->vbiq, wait);
-
- for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
- if (item->status == FBUFFER_DONE)
- {
- mask |= (POLLIN | POLLRDNORM);
- break;
- }
-
- DEBUG(printk(CARD_DEBUG "vbi_poll()=%x\n",CARD,mask));
-
- return mask;
-}
-
-static
-int vbi_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
-{
- struct zoran* ztv = dev->priv;
-
- switch (cmd) {
- case VIDIOCGVBIFMT:
- {
- struct vbi_format f;
- DEBUG(printk(CARD_DEBUG "VIDIOCGVBIINFO\n",CARD));
- f.sampling_rate = 14750000UL;
- f.samples_per_line = -ztv->readinfo[0].w;
- f.sample_format = VIDEO_PALETTE_RAW;
- f.start[0] = f.start[1] = ztv->readinfo[0].y;
- f.start[1] += 312;
- f.count[0] = f.count[1] = -ztv->readinfo[0].h;
- f.flags = VBI_INTERLACED;
- if (copy_to_user(arg,&f,sizeof(f)))
- return -EFAULT;
- break;
- }
- case VIDIOCSVBIFMT:
- {
- struct vbi_format f;
- int i;
- if (copy_from_user(&f, arg,sizeof(f)))
- return -EFAULT;
- DEBUG(printk(CARD_DEBUG "VIDIOCSVBIINFO(%d,%d,%d,%d,%d,%d,%d,%x)\n",CARD,f.sampling_rate,f.samples_per_line,f.sample_format,f.start[0],f.start[1],f.count[0],f.count[1],f.flags));
-
- /* lots of parameters are fixed... (PAL) */
- if (f.sampling_rate != 14750000UL ||
- f.samples_per_line > 864 ||
- f.sample_format != VIDEO_PALETTE_RAW ||
- f.start[0] < 0 ||
- f.start[0] != f.start[1]-312 ||
- f.count[0] != f.count[1] ||
- f.start[0]+f.count[0] >= 288 ||
- f.flags != VBI_INTERLACED)
- return -EINVAL;
-
- write_lock_irq(&ztv->lock);
- ztv->readinfo[0].y = f.start[0];
- ztv->readinfo[0].w = -f.samples_per_line;
- ztv->readinfo[0].h = -f.count[0];
- ztv->readinfo[0].bpl = f.samples_per_line*ztv->readinfo[0].bpp;
- for (i=1; i<ZORAN_VBI_BUFFERS; i++)
- ztv->readinfo[i] = ztv->readinfo[i];
- write_unlock_irq(&ztv->lock);
- break;
- }
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static struct video_device vbi_template=
-{
- .owner = THIS_MODULE,
- .name = "UNSET",
- .type = VID_TYPE_CAPTURE|VID_TYPE_TELETEXT,
- .hardware = VID_HARDWARE_ZR36120,
- .open = vbi_open,
- .close = vbi_close,
- .read = vbi_read,
- .write = zoran_write,
- .poll = vbi_poll,
- .ioctl = vbi_ioctl,
- .minor = -1,
-};
-
-/*
- * Scan for a Zoran chip, request the irq and map the io memory
- */
-static
-int __init find_zoran(void)
-{
- int result;
- struct zoran *ztv;
- struct pci_dev *dev = NULL;
- unsigned char revision;
- int zoran_num = 0;
-
- while ((dev = pci_get_device(PCI_VENDOR_ID_ZORAN,PCI_DEVICE_ID_ZORAN_36120, dev)))
- {
- /* Ok, a ZR36120/ZR36125 found! */
- ztv = &zorans[zoran_num];
- ztv->dev = dev;
-
- if (pci_enable_device(dev))
- continue;
-
- pci_read_config_byte(dev, PCI_CLASS_REVISION, &revision);
- printk(KERN_INFO "zoran: Zoran %x (rev %d) ",
- dev->device, revision);
- printk("bus: %d, devfn: %d, irq: %d, ",
- dev->bus->number, dev->devfn, dev->irq);
- printk("memory: 0x%08lx.\n", ztv->zoran_adr);
-
- ztv->zoran_mem = ioremap(ztv->zoran_adr, 0x1000);
- DEBUG(printk(KERN_DEBUG "zoran: mapped-memory at 0x%p\n",ztv->zoran_mem));
-
- result = request_irq(dev->irq, zoran_irq,
- IRQF_SHARED|IRQF_DISABLED,"zoran", ztv);
- if (result==-EINVAL)
- {
- iounmap(ztv->zoran_mem);
- printk(KERN_ERR "zoran: Bad irq number or handler\n");
- continue;
- }
- if (result==-EBUSY)
- printk(KERN_ERR "zoran: IRQ %d busy, change your PnP config in BIOS\n",dev->irq);
- if (result < 0) {
- iounmap(ztv->zoran_mem);
- continue;
- }
- /* Enable bus-mastering */
- pci_set_master(dev);
- /* Keep a reference */
- pci_dev_get(dev);
- zoran_num++;
- }
- if(zoran_num)
- printk(KERN_INFO "zoran: %d Zoran card(s) found.\n",zoran_num);
- return zoran_num;
-}
-
-static
-int __init init_zoran(int card)
-{
- struct zoran *ztv = &zorans[card];
- int i;
-
- /* if the given cardtype valid? */
- if (cardtype[card]>=NRTVCARDS) {
- printk(KERN_INFO "invalid cardtype(%d) detected\n",cardtype[card]);
- return -1;
- }
-
- /* reset the zoran */
- zrand(~ZORAN_PCI_SOFTRESET,ZORAN_PCI);
- udelay(10);
- zror(ZORAN_PCI_SOFTRESET,ZORAN_PCI);
- udelay(10);
-
- /* zoran chip specific details */
- ztv->card = tvcards+cardtype[card]; /* point to the selected card */
- ztv->norm = 0; /* PAL */
- ztv->tuner_freq = 0;
-
- /* videocard details */
- ztv->swidth = 800;
- ztv->sheight = 600;
- ztv->depth = 16;
-
- /* State details */
- ztv->fbuffer = 0;
- ztv->overinfo.kindof = FBUFFER_OVERLAY;
- ztv->overinfo.status = FBUFFER_FREE;
- ztv->overinfo.x = 0;
- ztv->overinfo.y = 0;
- ztv->overinfo.w = 768; /* 640 */
- ztv->overinfo.h = 576; /* 480 */
- ztv->overinfo.format = VIDEO_PALETTE_RGB565;
- ztv->overinfo.bpp = palette2fmt[ztv->overinfo.format].bpp;
- ztv->overinfo.bpl = ztv->overinfo.bpp*ztv->swidth;
- ztv->overinfo.busadr = 0;
- ztv->overinfo.memadr = 0;
- ztv->overinfo.overlay = 0;
- for (i=0; i<ZORAN_MAX_FBUFFERS; i++) {
- ztv->grabinfo[i] = ztv->overinfo;
- ztv->grabinfo[i].kindof = FBUFFER_GRAB;
- }
- init_waitqueue_head(&ztv->grabq);
-
- /* VBI details */
- ztv->readinfo[0] = ztv->overinfo;
- ztv->readinfo[0].kindof = FBUFFER_VBI;
- ztv->readinfo[0].w = -864;
- ztv->readinfo[0].h = -38;
- ztv->readinfo[0].format = VIDEO_PALETTE_YUV422;
- ztv->readinfo[0].bpp = palette2fmt[ztv->readinfo[0].format].bpp;
- ztv->readinfo[0].bpl = 1024*ztv->readinfo[0].bpp;
- for (i=1; i<ZORAN_VBI_BUFFERS; i++)
- ztv->readinfo[i] = ztv->readinfo[0];
- init_waitqueue_head(&ztv->vbiq);
-
- /* maintenance data */
- ztv->have_decoder = 0;
- ztv->have_tuner = 0;
- ztv->tuner_type = 0;
- ztv->running = 0;
- ztv->users = 0;
- rwlock_init(&ztv->lock);
- ztv->workqueue = 0;
- ztv->fieldnr = 0;
- ztv->lastfieldnr = 0;
-
- if (triton1)
- zrand(~ZORAN_VDC_TRICOM, ZORAN_VDC);
-
- /* external FL determines TOP frame */
- zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC);
-
- /* set HSpol */
- if (ztv->card->hsync_pos)
- zrwrite(ZORAN_VFEH_HSPOL, ZORAN_VFEH);
- /* set VSpol */
- if (ztv->card->vsync_pos)
- zrwrite(ZORAN_VFEV_VSPOL, ZORAN_VFEV);
-
- /* Set the proper General Purpuse register bits */
- /* implicit: no softreset, 0 waitstates */
- zrwrite(ZORAN_PCI_SOFTRESET|(ztv->card->gpdir<<0),ZORAN_PCI);
- /* implicit: 3 duration and recovery PCI clocks on guest 0-3 */
- zrwrite(ztv->card->gpval<<24,ZORAN_GUEST);
-
- /* clear interrupt status */
- zrwrite(~0, ZORAN_ISR);
-
- /*
- * i2c template
- */
- ztv->i2c = zoran_i2c_bus_template;
- sprintf(ztv->i2c.name,"zoran-%d",card);
- ztv->i2c.data = ztv;
-
- /*
- * Now add the template and register the device unit
- */
- ztv->video_dev = zr36120_template;
- strcpy(ztv->video_dev.name, ztv->i2c.name);
- ztv->video_dev.priv = ztv;
- if (video_register_device(&ztv->video_dev, VFL_TYPE_GRABBER, video_nr) < 0)
- return -1;
-
- ztv->vbi_dev = vbi_template;
- strcpy(ztv->vbi_dev.name, ztv->i2c.name);
- ztv->vbi_dev.priv = ztv;
- if (video_register_device(&ztv->vbi_dev, VFL_TYPE_VBI, vbi_nr) < 0) {
- video_unregister_device(&ztv->video_dev);
- return -1;
- }
- i2c_register_bus(&ztv->i2c);
-
- /* set interrupt mask - the PIN enable will be set later */
- zrwrite(ZORAN_ICR_GIRQ0|ZORAN_ICR_GIRQ1|ZORAN_ICR_CODE, ZORAN_ICR);
-
- printk(KERN_INFO "%s: installed %s\n",ztv->i2c.name,ztv->card->name);
- return 0;
-}
-
-static
-void release_zoran(int max)
-{
- struct zoran *ztv;
- int i;
-
- for (i=0;i<max; i++)
- {
- ztv = &zorans[i];
-
- /* turn off all capturing, DMA and IRQs */
- /* reset the zoran */
- zrand(~ZORAN_PCI_SOFTRESET,ZORAN_PCI);
- udelay(10);
- zror(ZORAN_PCI_SOFTRESET,ZORAN_PCI);
- udelay(10);
-
- /* first disable interrupts before unmapping the memory! */
- zrwrite(0, ZORAN_ICR);
- zrwrite(0xffffffffUL,ZORAN_ISR);
-
- /* free it */
- free_irq(ztv->dev->irq,ztv);
-
- /* unregister i2c_bus */
- i2c_unregister_bus((&ztv->i2c));
-
- /* unmap and free memory */
- if (ztv->zoran_mem)
- iounmap(ztv->zoran_mem);
-
- /* Drop PCI device */
- pci_dev_put(ztv->dev);
-
- video_unregister_device(&ztv->video_dev);
- video_unregister_device(&ztv->vbi_dev);
- }
-}
-
-void __exit zr36120_exit(void)
-{
- release_zoran(zoran_cards);
-}
-
-int __init zr36120_init(void)
-{
- int card;
-
- handle_chipset();
- zoran_cards = find_zoran();
- if (zoran_cards <= 0)
- return -EIO;
-
- /* initialize Zorans */
- for (card=0; card<zoran_cards; card++) {
- if (init_zoran(card) < 0) {
- /* only release the zorans we have registered */
- release_zoran(card);
- return -EIO;
- }
- }
- return 0;
-}
-
-module_init(zr36120_init);
-module_exit(zr36120_exit);
+++ /dev/null
-/*
- zr36120.h - Zoran 36120/36125 based framegrabbers
-
- Copyright (C) 1998-1999 Pauline Middelink (middelin@polyware.nl)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _ZR36120_H
-#define _ZR36120_H
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/wait.h>
-
-#include <linux/i2c-old.h>
-#include <linux/videodev.h>
-
-#include <asm/io.h>
-
-/*
- * Debug macro's, place an x behind the ) for actual debug-compilation
- * E.g. #define DEBUG(x...) x
- */
-#define DEBUG(x...) /* Debug driver */
-#define IDEBUG(x...) /* Debug interrupt handler */
-#define PDEBUG 0 /* Debug PCI writes */
-
-/* defined in zr36120_i2c */
-extern struct i2c_bus zoran_i2c_bus_template;
-
-#define ZORAN_MAX_FBUFFERS 2
-#define ZORAN_MAX_FBUFFER (768*576*2)
-#define ZORAN_MAX_FBUFSIZE (ZORAN_MAX_FBUFFERS*ZORAN_MAX_FBUFFER)
-
-#define ZORAN_VBI_BUFFERS 2
-#define ZORAN_VBI_BUFSIZE (22*1024*2)
-
-struct tvcard {
- char* name; /* name of the cardtype */
- int video_inputs; /* number of channels defined in video_mux */
- int audio_inputs; /* number of channels defined in audio_mux */
- __u32 swapi2c:1, /* need to swap i2c wires SDA/SCL? */
- usegirq1:1, /* VSYNC at GIRQ1 instead of GIRQ0? */
- vsync_pos:1, /* positive VSYNC signal? */
- hsync_pos:1, /* positive HSYNC signal? */
- gpdir:8, /* General Purpose Direction register */
- gpval:8; /* General Purpose Value register */
- int video_mux[6]; /* mapping channel number to physical input */
-#define IS_TUNER 0x80
-#define IS_SVHS 0x40
-#define CHANNEL_MASK 0x3F
- int audio_mux[6]; /* mapping channel number to physical input */
-};
-#define TUNER(x) ((x)|IS_TUNER)
-#define SVHS(x) ((x)|IS_SVHS)
-
-struct vidinfo {
- struct vidinfo* next; /* next active buffer */
- uint kindof;
-#define FBUFFER_OVERLAY 0
-#define FBUFFER_GRAB 1
-#define FBUFFER_VBI 2
- uint status;
-#define FBUFFER_FREE 0
-#define FBUFFER_BUSY 1
-#define FBUFFER_DONE 2
- ulong fieldnr; /* # of field, not framer! */
- uint x,y;
- int w,h; /* w,h can be negative! */
- uint format; /* index in palette2fmt[] */
- uint bpp; /* lookup from palette2fmt[] */
- uint bpl; /* calc: width * bpp */
- ulong busadr; /* bus addr for DMA engine */
- char* memadr; /* kernel addr for making copies */
- ulong* overlay; /* kernel addr of overlay mask */
-};
-
-struct zoran
-{
- struct video_device video_dev;
-#define CARD_DEBUG KERN_DEBUG "%s(%lu): "
-#define CARD_INFO KERN_INFO "%s(%lu): "
-#define CARD_ERR KERN_ERR "%s(%lu): "
-#define CARD ztv->video_dev.name,ztv->fieldnr
-
- /* zoran chip specific details */
- struct i2c_bus i2c; /* i2c registration data */
- struct pci_dev* dev; /* ptr to PCI device */
- ulong zoran_adr; /* bus address of IO memory */
- char* zoran_mem; /* kernel address of IO memory */
- struct tvcard* card; /* the cardtype */
- uint norm; /* 0=PAL, 1=NTSC, 2=SECAM */
- uint tuner_freq; /* Current freq in kHz */
- struct video_picture picture; /* Current picture params */
-
- /* videocard details */
- uint swidth; /* screen width */
- uint sheight; /* screen height */
- uint depth; /* depth in bits */
-
- /* State details */
- char* fbuffer; /* framebuffers for mmap */
- struct vidinfo overinfo; /* overlay data */
- struct vidinfo grabinfo[ZORAN_MAX_FBUFFERS]; /* grabbing data*/
- wait_queue_head_t grabq; /* grabbers queue */
-
- /* VBI details */
- struct video_device vbi_dev;
- struct vidinfo readinfo[2]; /* VBI data - flip buffers */
- wait_queue_head_t vbiq; /* vbi queue */
-
- /* maintenance data */
- int have_decoder; /* did we detect a mux? */
- int have_tuner; /* did we detect a tuner? */
- int users; /* howmany video/vbi open? */
- int tuner_type; /* tuner type, when found */
- int running; /* are we rolling? */
- rwlock_t lock;
- long state; /* what is requested of us? */
-#define STATE_OVERLAY 0
-#define STATE_VBI 1
- struct vidinfo* workqueue; /* buffers to grab, head is active */
- ulong fieldnr; /* #field, ticked every VSYNC */
- ulong lastfieldnr; /* #field, ticked every GRAB */
-
- int vidInterlace; /* calculated */
- int vidXshift; /* calculated */
- uint vidWidth; /* calculated */
- uint vidHeight; /* calculated */
-};
-
-#define zrwrite(dat,adr) writel((dat),(char *) (ztv->zoran_mem+(adr)))
-#define zrread(adr) readl(ztv->zoran_mem+(adr))
-
-#if PDEBUG == 0
-#define zrand(dat,adr) zrwrite((dat) & zrread(adr), adr)
-#define zror(dat,adr) zrwrite((dat) | zrread(adr), adr)
-#define zraor(dat,mask,adr) zrwrite( ((dat)&~(mask)) | ((mask)&zrread(adr)), adr)
-#else
-#define zrand(dat, adr) \
-do { \
- ulong data = (dat) & zrread((adr)); \
- zrwrite(data, (adr)); \
- if (0 != (~(dat) & zrread((adr)))) \
- printk(KERN_DEBUG "zoran: zrand at %d(%d) detected set bits(%x)\n", __LINE__, (adr), (dat)); \
-} while(0)
-
-#define zror(dat, adr) \
-do { \
- ulong data = (dat) | zrread((adr)); \
- zrwrite(data, (adr)); \
- if ((dat) != ((dat) & zrread(adr))) \
- printk(KERN_DEBUG "zoran: zror at %d(%d) detected unset bits(%x)\n", __LINE__, (adr), (dat)); \
-} while(0)
-
-#define zraor(dat, mask, adr) \
-do { \
- ulong data; \
- if ((dat) & (mask)) \
- printk(KERN_DEBUG "zoran: zraor at %d(%d) detected bits(%x:%x)\n", __LINE__, (adr), (dat), (mask)); \
- data = ((dat)&~(mask)) | ((mask) & zrread((adr))); \
- zrwrite(data,(adr)); \
- if ( (dat) != (~(mask) & zrread((adr))) ) \
- printk(KERN_DEBUG "zoran: zraor at %d(%d) could not set all bits(%x:%x)\n", __LINE__, (adr), (dat), (mask)); \
-} while(0)
-#endif
-
-#endif
-
-/* zoran PCI address space */
-#define ZORAN_VFEH 0x000 /* Video Front End Horizontal Conf. */
-#define ZORAN_VFEH_HSPOL (1<<30)
-#define ZORAN_VFEH_HSTART (0x3FF<<10)
-#define ZORAN_VFEH_HEND (0x3FF<<0)
-
-#define ZORAN_VFEV 0x004 /* Video Front End Vertical Conf. */
-#define ZORAN_VFEV_VSPOL (1<<30)
-#define ZORAN_VFEV_VSTART (0x3FF<<10)
-#define ZORAN_VFEV_VEND (0x3FF<<0)
-
-#define ZORAN_VFEC 0x008 /* Video Front End Scaler and Pixel */
-#define ZORAN_VFEC_EXTFL (1<<26)
-#define ZORAN_VFEC_TOPFIELD (1<<25)
-#define ZORAN_VFEC_VCLKPOL (1<<24)
-#define ZORAN_VFEC_HFILTER (7<<21)
-#define ZORAN_VFEC_HFILTER_1 (0<<21) /* no lumi, 3-tap chromo */
-#define ZORAN_VFEC_HFILTER_2 (1<<21) /* 3-tap lumi, 3-tap chromo */
-#define ZORAN_VFEC_HFILTER_3 (2<<21) /* 4-tap lumi, 4-tap chromo */
-#define ZORAN_VFEC_HFILTER_4 (3<<21) /* 5-tap lumi, 4-tap chromo */
-#define ZORAN_VFEC_HFILTER_5 (4<<21) /* 4-tap lumi, 4-tap chromo */
-#define ZORAN_VFEC_DUPFLD (1<<20)
-#define ZORAN_VFEC_HORDCM (63<<14)
-#define ZORAN_VFEC_VERDCM (63<<8)
-#define ZORAN_VFEC_DISPMOD (1<<6)
-#define ZORAN_VFEC_RGB (3<<3)
-#define ZORAN_VFEC_RGB_YUV422 (0<<3)
-#define ZORAN_VFEC_RGB_RGB888 (1<<3)
-#define ZORAN_VFEC_RGB_RGB565 (2<<3)
-#define ZORAN_VFEC_RGB_RGB555 (3<<3)
-#define ZORAN_VFEC_ERRDIF (1<<2)
-#define ZORAN_VFEC_PACK24 (1<<1)
-#define ZORAN_VFEC_LE (1<<0)
-
-#define ZORAN_VTOP 0x00C /* Video Display "Top" */
-
-#define ZORAN_VBOT 0x010 /* Video Display "Bottom" */
-
-#define ZORAN_VSTR 0x014 /* Video Display Stride */
-#define ZORAN_VSTR_DISPSTRIDE (0xFFFF<<16)
-#define ZORAN_VSTR_VIDOVF (1<<8)
-#define ZORAN_VSTR_SNAPSHOT (1<<1)
-#define ZORAN_VSTR_GRAB (1<<0)
-
-#define ZORAN_VDC 0x018 /* Video Display Conf. */
-#define ZORAN_VDC_VIDEN (1<<31)
-#define ZORAN_VDC_MINPIX (0x1F<<25)
-#define ZORAN_VDC_TRICOM (1<<24)
-#define ZORAN_VDC_VIDWINHT (0x3FF<<12)
-#define ZORAN_VDC_VIDWINWID (0x3FF<<0)
-
-#define ZORAN_MTOP 0x01C /* Masking Map "Top" */
-
-#define ZORAN_MBOT 0x020 /* Masking Map "Bottom" */
-
-#define ZORAN_OCR 0x024 /* Overlay Control */
-#define ZORAN_OCR_OVLEN (1<<15)
-#define ZORAN_OCR_MASKSTRIDE (0xFF<<0)
-
-#define ZORAN_PCI 0x028 /* System, PCI and GPP Control */
-#define ZORAN_PCI_SOFTRESET (1<<24)
-#define ZORAN_PCI_WAITSTATE (3<<16)
-#define ZORAN_PCI_GENPURDIR (0xFF<<0)
-
-#define ZORAN_GUEST 0x02C /* GuestBus Control */
-
-#define ZORAN_CSOURCE 0x030 /* Code Source Address */
-
-#define ZORAN_CTRANS 0x034 /* Code Transfer Control */
-
-#define ZORAN_CMEM 0x038 /* Code Memory Pointer */
-
-#define ZORAN_ISR 0x03C /* Interrupt Status Register */
-#define ZORAN_ISR_CODE (1<<28)
-#define ZORAN_ISR_GIRQ0 (1<<29)
-#define ZORAN_ISR_GIRQ1 (1<<30)
-
-#define ZORAN_ICR 0x040 /* Interrupt Control Register */
-#define ZORAN_ICR_EN (1<<24)
-#define ZORAN_ICR_CODE (1<<28)
-#define ZORAN_ICR_GIRQ0 (1<<29)
-#define ZORAN_ICR_GIRQ1 (1<<30)
-
-#define ZORAN_I2C 0x044 /* I2C-Bus */
-#define ZORAN_I2C_SCL (1<<1)
-#define ZORAN_I2C_SDA (1<<0)
-
-#define ZORAN_POST 0x48 /* PostOffice */
-#define ZORAN_POST_PEN (1<<25)
-#define ZORAN_POST_TIME (1<<24)
-#define ZORAN_POST_DIR (1<<23)
-#define ZORAN_POST_GUESTID (3<<20)
-#define ZORAN_POST_GUEST (7<<16)
-#define ZORAN_POST_DATA (0xFF<<0)
-
-#endif
+++ /dev/null
-/*
- zr36120_i2c.c - Zoran 36120/36125 based framegrabbers
-
- Copyright (C) 1998-1999 Pauline Middelink <middelin@polyware.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include <linux/video_decoder.h>
-#include <asm/uaccess.h>
-
-#include "tuner.h"
-#include "zr36120.h"
-
-/* ----------------------------------------------------------------------- */
-/* I2C functions */
-/* ----------------------------------------------------------------------- */
-
-/* software I2C functions */
-
-#define I2C_DELAY 10
-
-static void i2c_setlines(struct i2c_bus *bus,int ctrl,int data)
-{
- struct zoran *ztv = (struct zoran*)bus->data;
- unsigned int b = 0;
- if (data) b |= ztv->card->swapi2c ? ZORAN_I2C_SCL : ZORAN_I2C_SDA;
- if (ctrl) b |= ztv->card->swapi2c ? ZORAN_I2C_SDA : ZORAN_I2C_SCL;
- zrwrite(b, ZORAN_I2C);
- udelay(I2C_DELAY);
-}
-
-static int i2c_getdataline(struct i2c_bus *bus)
-{
- struct zoran *ztv = (struct zoran*)bus->data;
- if (ztv->card->swapi2c)
- return zrread(ZORAN_I2C) & ZORAN_I2C_SCL;
- return zrread(ZORAN_I2C) & ZORAN_I2C_SDA;
-}
-
-static
-void attach_inform(struct i2c_bus *bus, int id)
-{
- struct zoran *ztv = (struct zoran*)bus->data;
- struct video_decoder_capability dc;
- int rv;
-
- switch (id) {
- case I2C_DRIVERID_VIDEODECODER:
- DEBUG(printk(CARD_INFO "decoder attached\n",CARD));
-
- /* fetch the capabilities of the decoder */
- rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc);
- if (rv) {
- DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD));
- break;
- }
- DEBUG(printk(CARD_DEBUG "capabilities %d %d %d\n",CARD,dc.flags,dc.inputs,dc.outputs));
-
- /* Test if the decoder can de VBI transfers */
- if (dc.flags & 16 /*VIDEO_DECODER_VBI*/)
- ztv->have_decoder = 2;
- else
- ztv->have_decoder = 1;
- break;
- case I2C_DRIVERID_TUNER:
- ztv->have_tuner = 1;
- DEBUG(printk(CARD_INFO "tuner attached\n",CARD));
- if (ztv->tuner_type >= 0)
- {
- if (i2c_control_device(&ztv->i2c,I2C_DRIVERID_TUNER,TUNER_SET_TYPE,&ztv->tuner_type)<0)
- DEBUG(printk(CARD_INFO "attach_inform; tuner won't be set to type %d\n",CARD,ztv->tuner_type));
- }
- break;
- default:
- DEBUG(printk(CARD_INFO "attach_inform; unknown device id=%d\n",CARD,id));
- break;
- }
-}
-
-static
-void detach_inform(struct i2c_bus *bus, int id)
-{
- struct zoran *ztv = (struct zoran*)bus->data;
-
- switch (id) {
- case I2C_DRIVERID_VIDEODECODER:
- ztv->have_decoder = 0;
- DEBUG(printk(CARD_INFO "decoder detached\n",CARD));
- break;
- case I2C_DRIVERID_TUNER:
- ztv->have_tuner = 0;
- DEBUG(printk(CARD_INFO "tuner detached\n",CARD));
- break;
- default:
- DEBUG(printk(CARD_INFO "detach_inform; unknown device id=%d\n",CARD,id));
- break;
- }
-}
-
-struct i2c_bus zoran_i2c_bus_template =
-{
- "ZR36120",
- I2C_BUSID_ZORAN,
- NULL,
-
- SPIN_LOCK_UNLOCKED,
-
- attach_inform,
- detach_inform,
-
- i2c_setlines,
- i2c_getdataline,
- NULL,
- NULL
-};
+++ /dev/null
-/*
- zr36120_mem.c - Zoran 36120/36125 based framegrabbers
-
- Copyright (C) 1998-1999 Pauline Middelink <middelin@polyware.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#ifdef CONFIG_BIGPHYS_AREA
-#include <linux/bigphysarea.h>
-#endif
-
-#include "zr36120.h"
-#include "zr36120_mem.h"
-
-/*******************************/
-/* Memory management functions */
-/*******************************/
-
-void* bmalloc(unsigned long size)
-{
- void* mem;
-#ifdef CONFIG_BIGPHYS_AREA
- mem = bigphysarea_alloc_pages(size/PAGE_SIZE, 1, GFP_KERNEL);
-#else
- /*
- * The following function got a lot of memory at boottime,
- * so we know its always there...
- */
- mem = (void*)__get_free_pages(GFP_USER|GFP_DMA,get_order(size));
-#endif
- if (mem) {
- unsigned long adr = (unsigned long)mem;
- while (size > 0) {
- SetPageReserved(virt_to_page(phys_to_virt(adr)));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- }
- return mem;
-}
-
-void bfree(void* mem, unsigned long size)
-{
- if (mem) {
- unsigned long adr = (unsigned long)mem;
- unsigned long siz = size;
- while (siz > 0) {
- ClearPageReserved(virt_to_page(phys_to_virt(adr)));
- adr += PAGE_SIZE;
- siz -= PAGE_SIZE;
- }
-#ifdef CONFIG_BIGPHYS_AREA
- bigphysarea_free_pages(mem);
-#else
- free_pages((unsigned long)mem,get_order(size));
-#endif
- }
-}
-
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* either kmalloc() or bigphysarea() alloced memory - continuous */
-void* bmalloc(unsigned long size);
-void bfree(void* mem, unsigned long size);
extern int i2o_exec_lct_get(struct i2o_controller *);
extern int __init i2o_exec_init(void);
-extern void __exit i2o_exec_exit(void);
+extern void i2o_exec_exit(void);
/* driver */
extern struct bus_type i2o_bus_type;
extern int i2o_driver_dispatch(struct i2o_controller *, u32);
extern int __init i2o_driver_init(void);
-extern void __exit i2o_driver_exit(void);
+extern void i2o_driver_exit(void);
/* PCI */
extern int __init i2o_pci_init(void);
*
* Unregisters the I2O bus and frees driver array.
*/
-void __exit i2o_driver_exit(void)
+void i2o_driver_exit(void)
{
bus_unregister(&i2o_bus_type);
kfree(i2o_drivers);
*
* Unregisters the Exec OSM from the I2O core.
*/
-void __exit i2o_exec_exit(void)
+void i2o_exec_exit(void)
{
i2o_driver_unregister(&i2o_exec_driver);
};
if (!dev)
return -ENXIO;
- ops = (u8 *) kmalloc(kcmd.oplen, GFP_KERNEL);
+ ops = kmalloc(kcmd.oplen, GFP_KERNEL);
if (!ops)
return -ENOMEM;
* It's possible to have a _very_ large table
* and that the user asks for all of it at once...
*/
- res = (u8 *) kmalloc(65536, GFP_KERNEL);
+ res = kmalloc(65536, GFP_KERNEL);
if (!res) {
kfree(ops);
return -ENOMEM;
/* Register backlight stuff */
- msibl_device = backlight_device_register("msi-laptop-bl", NULL, &msibl_props);
+ msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL,
+ &msibl_props);
if (IS_ERR(msibl_device))
return PTR_ERR(msibl_device);
/*
- * linux/drivers/mmc/at91_mci.c - ATMEL AT91RM9200 MCI Driver
+ * linux/drivers/mmc/at91_mci.c - ATMEL AT91 MCI Driver
*
* Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved
*
*/
/*
- This is the AT91RM9200 MCI driver that has been tested with both MMC cards
+ This is the AT91 MCI driver that has been tested with both MMC cards
and SD-cards. Boards that support write protect are now supported.
The CCAT91SBC001 board does not support SD cards.
controller to manage the transfers.
A read is done from the controller directly to the scatterlist passed in from the request.
- Due to a bug in the controller, when a read is completed, all the words are byte
- swapped in the scatterlist buffers.
+ Due to a bug in the AT91RM9200 controller, when a read is completed, all the words are byte
+ swapped in the scatterlist buffers. AT91SAM926x are not affected by this bug.
The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY
#include <asm/irq.h>
#include <asm/mach/mmc.h>
#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91_mci.h>
#include <asm/arch/at91_pdc.h>
#undef SUPPORT_4WIRE
-static struct clk *mci_clk;
+#define FL_SENT_COMMAND (1 << 0)
+#define FL_SENT_STOP (1 << 1)
-#define FL_SENT_COMMAND (1 << 0)
-#define FL_SENT_STOP (1 << 1)
+#define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \
+ | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \
+ | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
+#define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
+#define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
/*
- * Read from a MCI register.
- */
-static inline unsigned long at91_mci_read(unsigned int reg)
-{
- void __iomem *mci_base = (void __iomem *)AT91_VA_BASE_MCI;
-
- return __raw_readl(mci_base + reg);
-}
-
-/*
- * Write to a MCI register.
- */
-static inline void at91_mci_write(unsigned int reg, unsigned long value)
-{
- void __iomem *mci_base = (void __iomem *)AT91_VA_BASE_MCI;
-
- __raw_writel(value, mci_base + reg);
-}
-
-/*
* Low level type for this driver
*/
struct at91mci_host
struct mmc_command *cmd;
struct mmc_request *request;
+ void __iomem *baseaddr;
+ int irq;
+
struct at91_mmc_data *board;
int present;
+ struct clk *mci_clk;
+
/*
* Flag indicating when the command has been sent. This is used to
* work out whether or not to send the stop
for (i = 0; i < len; i++) {
struct scatterlist *sg;
int amount;
- int index;
unsigned int *sgbuffer;
sg = &data->sg[i];
sgbuffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
amount = min(size, sg->length);
size -= amount;
- amount /= 4;
- for (index = 0; index < amount; index++)
- *dmabuf++ = swab32(sgbuffer[index]);
+ if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */
+ int index;
+
+ for (index = 0; index < (amount / 4); index++)
+ *dmabuf++ = swab32(sgbuffer[index]);
+ }
+ else
+ memcpy(dmabuf, sgbuffer, amount);
kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
/* Check to see if this needs filling */
if (i == 0) {
- if (at91_mci_read(AT91_PDC_RCR) != 0) {
+ if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
pr_debug("Transfer active in current\n");
continue;
}
}
else {
- if (at91_mci_read(AT91_PDC_RNCR) != 0) {
+ if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
pr_debug("Transfer active in next\n");
continue;
}
pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
if (i == 0) {
- at91_mci_write(AT91_PDC_RPR, sg->dma_address);
- at91_mci_write(AT91_PDC_RCR, sg->length / 4);
+ at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
+ at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
}
else {
- at91_mci_write(AT91_PDC_RNPR, sg->dma_address);
- at91_mci_write(AT91_PDC_RNCR, sg->length / 4);
+ at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
+ at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
}
}
while (host->in_use_index < host->transfer_index) {
unsigned int *buffer;
- int index;
- int len;
struct scatterlist *sg;
data->bytes_xfered += sg->length;
- len = sg->length / 4;
+ if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */
+ int index;
- for (index = 0; index < len; index++) {
- buffer[index] = swab32(buffer[index]);
+ for (index = 0; index < (sg->length / 4); index++)
+ buffer[index] = swab32(buffer[index]);
}
+
kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
flush_dcache_page(sg->page);
}
if (host->transfer_index < data->sg_len)
at91mci_pre_dma_read(host);
else {
- at91_mci_write(AT91_MCI_IER, AT91_MCI_RXBUFF);
- at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
+ at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
}
pr_debug("post dma read done\n");
pr_debug("Handling the transmit\n");
/* Disable the transfer */
- at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
/* Now wait for cmd ready */
- at91_mci_write(AT91_MCI_IDR, AT91_MCI_TXBUFE);
- at91_mci_write(AT91_MCI_IER, AT91_MCI_NOTBUSY);
+ at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
+ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
cmd = host->cmd;
if (!cmd) return;
/*
* Enable the controller
*/
-static void at91_mci_enable(void)
+static void at91_mci_enable(struct at91mci_host *host)
{
- at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIEN);
- at91_mci_write(AT91_MCI_IDR, 0xFFFFFFFF);
- at91_mci_write(AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
- at91_mci_write(AT91_MCI_MR, 0x834A);
- at91_mci_write(AT91_MCI_SDCR, 0x0);
+ at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
+ at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
+ at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
+ at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a);
+
+ /* use Slot A or B (only one at same time) */
+ at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
}
/*
* Disable the controller
*/
-static void at91_mci_disable(void)
+static void at91_mci_disable(struct at91mci_host *host)
{
- at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
+ at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
}
/*
/* Not sure if this is needed */
#if 0
- if ((at91_mci_read(AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
+ if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
pr_debug("Clearing timeout\n");
- at91_mci_write(AT91_MCI_ARGR, 0);
- at91_mci_write(AT91_MCI_CMDR, AT91_MCI_OPDCMD);
- while (!(at91_mci_read(AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
+ at91_mci_write(host, AT91_MCI_ARGR, 0);
+ at91_mci_write(host, AT91_MCI_CMDR, AT91_MCI_OPDCMD);
+ while (!(at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
/* spin */
- pr_debug("Clearing: SR = %08X\n", at91_mci_read(AT91_MCI_SR));
+ pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
}
}
#endif
/*
* Set the arguments and send the command
*/
- pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08lX)\n",
- cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(AT91_MCI_MR));
+ pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n",
+ cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
if (!data) {
- at91_mci_write(AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
- at91_mci_write(AT91_PDC_RPR, 0);
- at91_mci_write(AT91_PDC_RCR, 0);
- at91_mci_write(AT91_PDC_RNPR, 0);
- at91_mci_write(AT91_PDC_RNCR, 0);
- at91_mci_write(AT91_PDC_TPR, 0);
- at91_mci_write(AT91_PDC_TCR, 0);
- at91_mci_write(AT91_PDC_TNPR, 0);
- at91_mci_write(AT91_PDC_TNCR, 0);
-
- at91_mci_write(AT91_MCI_ARGR, cmd->arg);
- at91_mci_write(AT91_MCI_CMDR, cmdr);
+ at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
+ at91_mci_write(host, AT91_PDC_RPR, 0);
+ at91_mci_write(host, AT91_PDC_RCR, 0);
+ at91_mci_write(host, AT91_PDC_RNPR, 0);
+ at91_mci_write(host, AT91_PDC_RNCR, 0);
+ at91_mci_write(host, AT91_PDC_TPR, 0);
+ at91_mci_write(host, AT91_PDC_TCR, 0);
+ at91_mci_write(host, AT91_PDC_TNPR, 0);
+ at91_mci_write(host, AT91_PDC_TNCR, 0);
+
+ at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
+ at91_mci_write(host, AT91_MCI_CMDR, cmdr);
return AT91_MCI_CMDRDY;
}
- mr = at91_mci_read(AT91_MCI_MR) & 0x7fff; /* zero block length and PDC mode */
- at91_mci_write(AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
+ mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; /* zero block length and PDC mode */
+ at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
/*
* Disable the PDC controller
*/
- at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
if (cmdr & AT91_MCI_TRCMD_START) {
data->bytes_xfered = 0;
pr_debug("Transmitting %d bytes\n", host->total_length);
- at91_mci_write(AT91_PDC_TPR, host->physical_address);
- at91_mci_write(AT91_PDC_TCR, host->total_length / 4);
+ at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
+ at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
ier = AT91_MCI_TXBUFE;
}
}
* the data sheet says
*/
- at91_mci_write(AT91_MCI_ARGR, cmd->arg);
- at91_mci_write(AT91_MCI_CMDR, cmdr);
+ at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
+ at91_mci_write(host, AT91_MCI_CMDR, cmdr);
if (cmdr & AT91_MCI_TRCMD_START) {
if (cmdr & AT91_MCI_TRDIR)
- at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTEN);
+ at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
else
- at91_mci_write(AT91_PDC_PTCR, AT91_PDC_TXTEN);
+ at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
}
return ier;
}
pr_debug("setting ier to %08X\n", ier);
/* Stop on errors or the required value */
- at91_mci_write(AT91_MCI_IER, 0xffff0000 | ier);
+ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier);
}
/*
struct mmc_command *cmd = host->cmd;
unsigned int status;
- at91_mci_write(AT91_MCI_IDR, 0xffffffff);
+ at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
- cmd->resp[0] = at91_mci_read(AT91_MCI_RSPR(0));
- cmd->resp[1] = at91_mci_read(AT91_MCI_RSPR(1));
- cmd->resp[2] = at91_mci_read(AT91_MCI_RSPR(2));
- cmd->resp[3] = at91_mci_read(AT91_MCI_RSPR(3));
+ cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0));
+ cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1));
+ cmd->resp[2] = at91_mci_read(host, AT91_MCI_RSPR(2));
+ cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
if (host->buffer) {
dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
host->buffer = NULL;
}
- status = at91_mci_read(AT91_MCI_SR);
+ status = at91_mci_read(host, AT91_MCI_SR);
pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
{
int clkdiv;
struct at91mci_host *host = mmc_priv(mmc);
- unsigned long at91_master_clock = clk_get_rate(mci_clk);
+ unsigned long at91_master_clock = clk_get_rate(host->mci_clk);
host->bus_mode = ios->bus_mode;
if (ios->clock == 0) {
/* Disable the MCI controller */
- at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIDIS);
+ at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS);
clkdiv = 0;
}
else {
/* Enable the MCI controller */
- at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIEN);
+ at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
if ((at91_master_clock % (ios->clock * 2)) == 0)
clkdiv = ((at91_master_clock / ios->clock) / 2) - 1;
}
if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) {
pr_debug("MMC: Setting controller bus width to 4\n");
- at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
+ at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
}
else {
pr_debug("MMC: Setting controller bus width to 1\n");
- at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
+ at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
}
/* Set the clock divider */
- at91_mci_write(AT91_MCI_MR, (at91_mci_read(AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
+ at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
/* maybe switch power to the card */
if (host->board->vcc_pin) {
switch (ios->power_mode) {
case MMC_POWER_OFF:
- at91_set_gpio_output(host->board->vcc_pin, 0);
+ at91_set_gpio_value(host->board->vcc_pin, 0);
break;
case MMC_POWER_UP:
case MMC_POWER_ON:
- at91_set_gpio_output(host->board->vcc_pin, 1);
+ at91_set_gpio_value(host->board->vcc_pin, 1);
break;
}
}
{
struct at91mci_host *host = devid;
int completed = 0;
+ unsigned int int_status, int_mask;
- unsigned int int_status;
+ int_status = at91_mci_read(host, AT91_MCI_SR);
+ int_mask = at91_mci_read(host, AT91_MCI_IMR);
+
+ pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
+ int_status & int_mask);
+
+ int_status = int_status & int_mask;
- int_status = at91_mci_read(AT91_MCI_SR);
- pr_debug("MCI irq: status = %08X, %08lX, %08lX\n", int_status, at91_mci_read(AT91_MCI_IMR),
- int_status & at91_mci_read(AT91_MCI_IMR));
-
- if ((int_status & at91_mci_read(AT91_MCI_IMR)) & 0xffff0000)
+ if (int_status & AT91_MCI_ERRORS) {
completed = 1;
+
+ if (int_status & AT91_MCI_UNRE)
+ pr_debug("MMC: Underrun error\n");
+ if (int_status & AT91_MCI_OVRE)
+ pr_debug("MMC: Overrun error\n");
+ if (int_status & AT91_MCI_DTOE)
+ pr_debug("MMC: Data timeout\n");
+ if (int_status & AT91_MCI_DCRCE)
+ pr_debug("MMC: CRC error in data\n");
+ if (int_status & AT91_MCI_RTOE)
+ pr_debug("MMC: Response timeout\n");
+ if (int_status & AT91_MCI_RENDE)
+ pr_debug("MMC: Response end bit error\n");
+ if (int_status & AT91_MCI_RCRCE)
+ pr_debug("MMC: Response CRC error\n");
+ if (int_status & AT91_MCI_RDIRE)
+ pr_debug("MMC: Response direction error\n");
+ if (int_status & AT91_MCI_RINDE)
+ pr_debug("MMC: Response index error\n");
+ } else {
+ /* Only continue processing if no errors */
- int_status &= at91_mci_read(AT91_MCI_IMR);
-
- if (int_status & AT91_MCI_UNRE)
- pr_debug("MMC: Underrun error\n");
- if (int_status & AT91_MCI_OVRE)
- pr_debug("MMC: Overrun error\n");
- if (int_status & AT91_MCI_DTOE)
- pr_debug("MMC: Data timeout\n");
- if (int_status & AT91_MCI_DCRCE)
- pr_debug("MMC: CRC error in data\n");
- if (int_status & AT91_MCI_RTOE)
- pr_debug("MMC: Response timeout\n");
- if (int_status & AT91_MCI_RENDE)
- pr_debug("MMC: Response end bit error\n");
- if (int_status & AT91_MCI_RCRCE)
- pr_debug("MMC: Response CRC error\n");
- if (int_status & AT91_MCI_RDIRE)
- pr_debug("MMC: Response direction error\n");
- if (int_status & AT91_MCI_RINDE)
- pr_debug("MMC: Response index error\n");
-
- /* Only continue processing if no errors */
- if (!completed) {
if (int_status & AT91_MCI_TXBUFE) {
pr_debug("TX buffer empty\n");
at91_mci_handle_transmitted(host);
if (int_status & AT91_MCI_RXBUFF) {
pr_debug("RX buffer full\n");
- at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY);
+ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
}
- if (int_status & AT91_MCI_ENDTX) {
+ if (int_status & AT91_MCI_ENDTX)
pr_debug("Transmit has ended\n");
- }
if (int_status & AT91_MCI_ENDRX) {
pr_debug("Receive has ended\n");
if (int_status & AT91_MCI_NOTBUSY) {
pr_debug("Card is ready\n");
- at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY);
+ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
}
- if (int_status & AT91_MCI_DTIP) {
+ if (int_status & AT91_MCI_DTIP)
pr_debug("Data transfer in progress\n");
- }
- if (int_status & AT91_MCI_BLKE) {
+ if (int_status & AT91_MCI_BLKE)
pr_debug("Block transfer has ended\n");
- }
- if (int_status & AT91_MCI_TXRDY) {
+ if (int_status & AT91_MCI_TXRDY)
pr_debug("Ready to transmit\n");
- }
- if (int_status & AT91_MCI_RXRDY) {
+ if (int_status & AT91_MCI_RXRDY)
pr_debug("Ready to receive\n");
- }
if (int_status & AT91_MCI_CMDRDY) {
pr_debug("Command ready\n");
completed = 1;
}
}
- at91_mci_write(AT91_MCI_IDR, int_status);
if (completed) {
pr_debug("Completed command\n");
- at91_mci_write(AT91_MCI_IDR, 0xffffffff);
+ at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
at91mci_completed_command(host);
- }
+ } else
+ at91_mci_write(host, AT91_MCI_IDR, int_status);
return IRQ_HANDLED;
}
present ? "insert" : "remove");
if (!present) {
pr_debug("****** Resetting SD-card bus width ******\n");
- at91_mci_write(AT91_MCI_SDCR, 0);
+ at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
}
mmc_detect_change(host->mmc, msecs_to_jiffies(100));
}
{
struct mmc_host *mmc;
struct at91mci_host *host;
+ struct resource *res;
int ret;
pr_debug("Probe MCI devices\n");
- at91_mci_disable();
- at91_mci_enable();
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ if (!request_mem_region(res->start, res->end - res->start + 1, DRIVER_NAME))
+ return -EBUSY;
mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
if (!mmc) {
pr_debug("Failed to allocate mmc host\n");
+ release_mem_region(res->start, res->end - res->start + 1);
return -ENOMEM;
}
#ifdef SUPPORT_4WIRE
mmc->caps |= MMC_CAP_4_BIT_DATA;
#else
- printk("MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
+ printk("AT91 MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
#endif
}
/*
* Get Clock
*/
- mci_clk = clk_get(&pdev->dev, "mci_clk");
- if (IS_ERR(mci_clk)) {
+ host->mci_clk = clk_get(&pdev->dev, "mci_clk");
+ if (IS_ERR(host->mci_clk)) {
printk(KERN_ERR "AT91 MMC: no clock defined.\n");
mmc_free_host(mmc);
+ release_mem_region(res->start, res->end - res->start + 1);
return -ENODEV;
}
- clk_enable(mci_clk); /* Enable the peripheral clock */
+
+ /*
+ * Map I/O region
+ */
+ host->baseaddr = ioremap(res->start, res->end - res->start + 1);
+ if (!host->baseaddr) {
+ clk_put(host->mci_clk);
+ mmc_free_host(mmc);
+ release_mem_region(res->start, res->end - res->start + 1);
+ return -ENOMEM;
+ }
+
+ /*
+ * Reset hardware
+ */
+ clk_enable(host->mci_clk); /* Enable the peripheral clock */
+ at91_mci_disable(host);
+ at91_mci_enable(host);
/*
* Allocate the MCI interrupt
*/
- ret = request_irq(AT91RM9200_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
+ host->irq = platform_get_irq(pdev, 0);
+ ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
if (ret) {
- printk(KERN_ERR "Failed to request MCI interrupt\n");
- clk_disable(mci_clk);
- clk_put(mci_clk);
+ printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
+ clk_disable(host->mci_clk);
+ clk_put(host->mci_clk);
mmc_free_host(mmc);
+ iounmap(host->baseaddr);
+ release_mem_region(res->start, res->end - res->start + 1);
return ret;
}
ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
0, DRIVER_NAME, host);
if (ret)
- printk(KERN_ERR "couldn't allocate MMC detect irq\n");
+ printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
}
- pr_debug(KERN_INFO "Added MCI driver\n");
+ pr_debug("Added MCI driver\n");
return 0;
}
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct at91mci_host *host;
+ struct resource *res;
if (!mmc)
return -1;
cancel_delayed_work(&host->mmc->detect);
}
+ at91_mci_disable(host);
mmc_remove_host(mmc);
- at91_mci_disable();
- free_irq(AT91RM9200_ID_MCI, host);
- mmc_free_host(mmc);
+ free_irq(host->irq, host);
- clk_disable(mci_clk); /* Disable the peripheral clock */
- clk_put(mci_clk);
+ clk_disable(host->mci_clk); /* Disable the peripheral clock */
+ clk_put(host->mci_clk);
- platform_set_drvdata(pdev, NULL);
+ iounmap(host->baseaddr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
+ mmc_free_host(mmc);
+ platform_set_drvdata(pdev, NULL);
pr_debug("MCI Removed\n");
return 0;
host->rx_chan = rxchan;
}
-struct const mmc_host_ops au1xmmc_ops = {
+static const struct mmc_host_ops au1xmmc_ops = {
.request = au1xmmc_request,
.set_ios = au1xmmc_set_ios,
};
spin_unlock_irq(q->queue_lock);
if (!req) {
- if (kthread_should_stop())
+ if (kthread_should_stop()) {
+ set_current_state(TASK_RUNNING);
break;
+ }
up(&mq->thread_sem);
schedule();
down(&mq->thread_sem);
struct pxamci_host *host = mmc_priv(mmc);
if (host->pdata && host->pdata->get_ro)
- return host->pdata->get_ro(mmc->dev);
+ return host->pdata->get_ro(mmc_dev(mmc));
/* Host doesn't support read only detection so assume writeable */
return 0;
}
host->power_mode = ios->power_mode;
if (host->pdata && host->pdata->setpower)
- host->pdata->setpower(mmc->dev, ios->vdd);
+ host->pdata->setpower(mmc_dev(mmc), ios->vdd);
if (ios->power_mode == MMC_POWER_ON)
host->cmdat |= CMDAT_INIT;
}
if (pci_resource_len(pdev, first_bar + slot) != 0x100) {
- printk(KERN_ERR DRIVER_NAME ": Invalid iomem size. Aborting.\n");
- return -ENODEV;
+ printk(KERN_ERR DRIVER_NAME ": Invalid iomem size. "
+ "You may experience problems.\n");
}
if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
writel(TIFM_FIFO_INT_SETALL,
sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
- writel(long_log2(cmd->data->blksz) - 2,
+ writel(ilog2(cmd->data->blksz) - 2,
sock->addr + SOCK_FIFO_PAGE_SIZE);
writel(TIFM_FIFO_ENABLE, sock->addr + SOCK_FIFO_CONTROL);
writel(TIFM_FIFO_INTMASK, sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
struct mtd_info *device;
struct flash_platform_data *pdata = spi->dev.platform_data;
- priv = (struct dataflash *) kzalloc(sizeof *priv, GFP_KERNEL);
+ priv = kzalloc(sizeof *priv, GFP_KERNEL);
if (!priv)
return -ENOMEM;
if (mtd->type != MTD_NORFLASH)
return;
- part = kcalloc(1, sizeof(struct partition), GFP_KERNEL);
+ part = kzalloc(sizeof(struct partition), GFP_KERNEL);
if (!part)
return;
int res;
/* Install the Interrupt handler. Or we could shunt this out to specific drivers? */
- if (request_irq(lp->irq, lance_interrupt, 0, lp->name, dev))
+ if (request_irq(lp->irq, lance_interrupt, SA_SHIRQ, lp->name, dev))
return -EAGAIN;
res = lance_reset(dev);
}
if (done) {
+ unsigned long flags;
/*
* Order is important since data can get interrupted
* again when we think we are done.
*/
- local_irq_disable();
+ local_irq_save(flags);
RTL_W16_F(IntrMask, rtl8139_intr_mask);
__netif_rx_complete(dev);
- local_irq_enable();
+ local_irq_restore(flags);
}
spin_unlock(&tp->rx_lock);
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
+config CHELSIO_T1_NAPI
+ bool "Use Rx Polling (NAPI)"
+ depends on CHELSIO_T1
+ default y
+ help
+ NAPI is a driver API designed to reduce CPU and interrupt load
+ when the driver is receiving lots of packets from the card.
+
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS
#endif
dev->base_addr = ioaddr;
+ dev->irq = IRQ_AMIGA_PORTS;
/* Install the Interrupt handler */
- i = request_irq(IRQ_AMIGA_PORTS, apne_interrupt, IRQF_SHARED, DRV_NAME, dev);
+ i = request_irq(dev->irq, apne_interrupt, IRQF_SHARED, DRV_NAME, dev);
if (i) return i;
for(i = 0; i < ETHER_ADDR_LEN; i++) {
*/
static int ipddp_create(struct ipddp_route *new_rt)
{
- struct ipddp_route *rt =(struct ipddp_route*) kmalloc(sizeof(*rt), GFP_KERNEL);
+ struct ipddp_route *rt = kmalloc(sizeof(*rt), GFP_KERNEL);
if (rt == NULL)
return -ENOMEM;
if (CHIP_NUM(bp) == CHIP_NUM_5709) {
fw = &bnx2_cp_fw_09;
- load_cpu_fw(bp, &cpu_reg, fw);
+ rc = load_cpu_fw(bp, &cpu_reg, fw);
if (rc)
goto init_cpu_err;
}
* Allocate the main control structure for this instance.
*/
maxmaxcode = MAXCODE(bits);
- db = (struct bsd_db *) kmalloc (sizeof (struct bsd_db),
+ db = kmalloc(sizeof (struct bsd_db),
GFP_KERNEL);
if (!db)
{
t1_interrupts_clear(adapter);
- adapter->params.has_msi = !disable_msi && pci_enable_msi(adapter->pdev) == 0;
- err = request_irq(adapter->pdev->irq,
- t1_select_intr_handler(adapter),
+ adapter->params.has_msi = !disable_msi && !pci_enable_msi(adapter->pdev);
+ err = request_irq(adapter->pdev->irq, t1_interrupt,
adapter->params.has_msi ? 0 : IRQF_SHARED,
adapter->name, adapter);
if (err) {
{
struct adapter *adapter = dev->priv;
- /*
- * If RX coalescing is requested we use NAPI, otherwise interrupts.
- * This choice can be made only when all ports and the TOE are off.
- */
- if (adapter->open_device_map == 0)
- adapter->params.sge.polling = c->use_adaptive_rx_coalesce;
-
- if (adapter->params.sge.polling) {
- adapter->params.sge.rx_coalesce_usecs = 0;
- } else {
- adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
- }
+ adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
adapter->params.sge.sample_interval_usecs = c->rate_sample_interval;
t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge);
struct adapter *adapter = dev->priv;
local_irq_save(flags);
- t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter);
+ t1_interrupt(adapter->pdev->irq, adapter);
local_irq_restore(flags);
}
#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = t1_netpoll;
#endif
+#ifdef CONFIG_CHELSIO_T1_NAPI
netdev->weight = 64;
+ netdev->poll = t1_poll;
+#endif
SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops);
}
if (unlikely(adapter->vlan_grp && p->vlan_valid)) {
st->vlan_xtract++;
- if (adapter->params.sge.polling)
+#ifdef CONFIG_CHELSIO_T1_NAPI
vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
ntohs(p->vlan));
- else
+#else
vlan_hwaccel_rx(skb, adapter->vlan_grp,
ntohs(p->vlan));
- } else if (adapter->params.sge.polling)
+#endif
+ } else {
+#ifdef CONFIG_CHELSIO_T1_NAPI
netif_receive_skb(skb);
- else
+#else
netif_rx(skb);
+#endif
+ }
return 0;
}
return budget;
}
+#ifdef CONFIG_CHELSIO_T1_NAPI
/*
* A simpler version of process_responses() that handles only pure (i.e.,
* non data-carrying) responses. Such respones are too light-weight to justify
* or protection from interrupts as data interrupts are off at this point and
* other adapter interrupts do not interfere.
*/
-static int t1_poll(struct net_device *dev, int *budget)
+int t1_poll(struct net_device *dev, int *budget)
{
struct adapter *adapter = dev->priv;
int effective_budget = min(*budget, dev->quota);
-
int work_done = process_responses(adapter, effective_budget);
+
*budget -= work_done;
dev->quota -= work_done;
if (work_done >= effective_budget)
return 1;
+ spin_lock_irq(&adapter->async_lock);
__netif_rx_complete(dev);
-
- /*
- * Because we don't atomically flush the following write it is
- * possible that in very rare cases it can reach the device in a way
- * that races with a new response being written plus an error interrupt
- * causing the NAPI interrupt handler below to return unhandled status
- * to the OS. To protect against this would require flushing the write
- * and doing both the write and the flush with interrupts off. Way too
- * expensive and unjustifiable given the rarity of the race.
- */
writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING);
- return 0;
-}
+ writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
+ adapter->regs + A_PL_ENABLE);
+ spin_unlock_irq(&adapter->async_lock);
-/*
- * Returns true if the device is already scheduled for polling.
- */
-static inline int napi_is_scheduled(struct net_device *dev)
-{
- return test_bit(__LINK_STATE_RX_SCHED, &dev->state);
+ return 0;
}
/*
* NAPI version of the main interrupt handler.
*/
-static irqreturn_t t1_interrupt_napi(int irq, void *data)
+irqreturn_t t1_interrupt(int irq, void *data)
{
- int handled;
struct adapter *adapter = data;
+ struct net_device *dev = adapter->sge->netdev;
struct sge *sge = adapter->sge;
- struct respQ *q = &adapter->sge->respQ;
+ u32 cause;
+ int handled = 0;
- /*
- * Clear the SGE_DATA interrupt first thing. Normally the NAPI
- * handler has control of the response queue and the interrupt handler
- * can look at the queue reliably only once it knows NAPI is off.
- * We can't wait that long to clear the SGE_DATA interrupt because we
- * could race with t1_poll rearming the SGE interrupt, so we need to
- * clear the interrupt speculatively and really early on.
- */
- writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+ cause = readl(adapter->regs + A_PL_CAUSE);
+ if (cause == 0 || cause == ~0)
+ return IRQ_NONE;
spin_lock(&adapter->async_lock);
- if (!napi_is_scheduled(sge->netdev)) {
+ if (cause & F_PL_INTR_SGE_DATA) {
+ struct respQ *q = &adapter->sge->respQ;
struct respQ_e *e = &q->entries[q->cidx];
- if (e->GenerationBit == q->genbit) {
- if (e->DataValid ||
- process_pure_responses(adapter, e)) {
- if (likely(__netif_rx_schedule_prep(sge->netdev)))
- __netif_rx_schedule(sge->netdev);
- else if (net_ratelimit())
- printk(KERN_INFO
- "NAPI schedule failure!\n");
- } else
- writel(q->cidx, adapter->regs + A_SG_SLEEPING);
-
- handled = 1;
- goto unlock;
- } else
- writel(q->cidx, adapter->regs + A_SG_SLEEPING);
- } else if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) {
- printk(KERN_ERR "data interrupt while NAPI running\n");
- }
-
- handled = t1_slow_intr_handler(adapter);
+ handled = 1;
+ writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+
+ if (e->GenerationBit == q->genbit &&
+ __netif_rx_schedule_prep(dev)) {
+ if (e->DataValid || process_pure_responses(adapter, e)) {
+ /* mask off data IRQ */
+ writel(adapter->slow_intr_mask,
+ adapter->regs + A_PL_ENABLE);
+ __netif_rx_schedule(sge->netdev);
+ goto unlock;
+ }
+ /* no data, no NAPI needed */
+ netif_poll_enable(dev);
+
+ }
+ writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+ } else
+ handled = t1_slow_intr_handler(adapter);
+
if (!handled)
sge->stats.unhandled_irqs++;
- unlock:
+unlock:
spin_unlock(&adapter->async_lock);
return IRQ_RETVAL(handled != 0);
}
+#else
/*
* Main interrupt handler, optimized assuming that we took a 'DATA'
* interrupt.
* 5. If we took an interrupt, but no valid respQ descriptors was found we
* let the slow_intr_handler run and do error handling.
*/
-static irqreturn_t t1_interrupt(int irq, void *cookie)
+irqreturn_t t1_interrupt(int irq, void *cookie)
{
int work_done;
struct respQ_e *e;
spin_unlock(&adapter->async_lock);
return IRQ_RETVAL(work_done != 0);
}
-
-irq_handler_t t1_select_intr_handler(adapter_t *adapter)
-{
- return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt;
-}
+#endif
/*
* Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it.
*/
int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p)
{
- sge->netdev->poll = t1_poll;
sge->fixed_intrtimer = p->rx_coalesce_usecs *
core_ticks_per_usec(sge->adapter);
writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER);
p->coalesce_enable = 0;
p->sample_interval_usecs = 0;
- p->polling = 0;
return sge;
nomem_port:
int t1_sge_configure(struct sge *, struct sge_params *);
int t1_sge_set_coalesce_params(struct sge *, struct sge_params *);
void t1_sge_destroy(struct sge *);
-irq_handler_t t1_select_intr_handler(adapter_t *adapter);
+irqreturn_t t1_interrupt(int irq, void *cookie);
+int t1_poll(struct net_device *, int *);
+
int t1_start_xmit(struct sk_buff *skb, struct net_device *dev);
void t1_set_vlan_accel(struct adapter *adapter, int on_off);
void t1_sge_start(struct sge *);
nic->rx_to_use = nic->rx_to_clean = NULL;
nic->ru_running = RU_UNINITIALIZED;
- if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC)))
+ if(!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
return -ENOMEM;
- memset(nic->rxs, 0, sizeof(struct rx) * count);
for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
static void sp_setup(struct net_device *dev)
{
- static char ax25_bcast[AX25_ADDR_LEN] =
- {'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1};
- static char ax25_test[AX25_ADDR_LEN] =
- {'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1};
-
/* Finish setting up the DEVICE info. */
dev->mtu = SIXP_MTU;
dev->hard_start_xmit = sp_xmit;
dev->tx_timeout = NULL;
/* Only activated in AX.25 mode */
- memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN);
+ memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
SET_MODULE_OWNER(dev);
*/
static void baycom_probe(struct net_device *dev)
{
- static char ax25_bcast[AX25_ADDR_LEN] = {
- 'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1
- };
- static char ax25_nocall[AX25_ADDR_LEN] = {
- 'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1
- };
const struct hdlcdrv_channel_params dflt_ch_params = {
20, 2, 10, 40, 0
};
dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */
dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */
- memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN);
+ memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, &null_ax25_address, AX25_ADDR_LEN);
dev->tx_queue_len = 16;
/* New style flags */
static char banner[] __initdata = KERN_INFO "AX.25: bpqether driver version 004\n";
-static unsigned char ax25_bcast[AX25_ADDR_LEN] =
- {'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1};
-static unsigned char ax25_defaddr[AX25_ADDR_LEN] =
- {'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1};
-
static char bcast_addr[6]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
static char bpq_eth_addr[6];
dev->do_ioctl = bpq_ioctl;
dev->destructor = free_netdev;
- memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_defaddr, AX25_ADDR_LEN);
+ memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
dev->flags = 0;
/* Beware! hw[] is also used in cleanup_module(). */
static struct scc_hardware hw[NUM_TYPES] __initdata_or_module = HARDWARE;
-static char ax25_broadcast[7] __initdata =
- { 'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1,
-'0' << 1 };
-static char ax25_test[7] __initdata =
- { 'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1,
-'1' << 1 };
/* Global variables */
dev->mtu = 1500;
dev->addr_len = AX25_ADDR_LEN;
dev->tx_queue_len = 64;
- memcpy(dev->broadcast, ax25_broadcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN);
+ memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
}
static int __init setup_adapter(int card_base, int type, int n)
/* --------------------------------------------------------------------- */
-/*
- * The name of the card. Is used for messages and in the requests for
- * io regions, irqs and dma channels
- */
-
-static char ax25_bcast[AX25_ADDR_LEN] =
-{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1};
-static char ax25_nocall[AX25_ADDR_LEN] =
-{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1};
-
-/* --------------------------------------------------------------------- */
-
#define KISS_VERBOSE
/* --------------------------------------------------------------------- */
dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */
dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */
- memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN);
+ memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
dev->tx_queue_len = 16;
}
static void ax_setup(struct net_device *dev)
{
- static char ax25_bcast[AX25_ADDR_LEN] =
- {'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1};
- static char ax25_test[AX25_ADDR_LEN] =
- {'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1};
-
/* Finish setting up the DEVICE info. */
dev->mtu = AX_MTU;
dev->hard_start_xmit = ax_xmit;
dev->hard_header = ax_header;
dev->rebuild_header = ax_rebuild_header;
- memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN);
+ memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
dev->flags = IFF_BROADCAST | IFF_MULTICAST;
}
/* * Network driver methods * */
/* ******************************************************************** */
-static unsigned char ax25_bcast[AX25_ADDR_LEN] =
-{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1};
-static unsigned char ax25_nocall[AX25_ADDR_LEN] =
-{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1};
-
/* ----> Initialize device <----- */
static void scc_net_setup(struct net_device *dev)
dev->do_ioctl = scc_net_ioctl;
dev->tx_timeout = NULL;
- memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN);
+ memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
dev->flags = 0;
static struct yam_mcs *yam_data;
-static char ax25_bcast[7] =
-{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1};
-static char ax25_test[7] =
-{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1};
-
static DEFINE_TIMER(yam_timer, NULL, 0, 0);
/* --------------------------------------------------------------------- */
dev->hard_header_len = AX25_MAX_HEADER_LEN;
dev->mtu = AX25_MTU;
dev->addr_len = AX25_ADDR_LEN;
- memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
- memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN);
+ memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
+ memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
}
static int __init yam_init_driver(void)
{
struct net_device *dev;
int err = -ENOMEM;
+ int i;
dev = alloc_etherdev(sizeof(struct hplance_private));
if (!dev)
goto out_release_mem_region;
dio_set_drvdata(d, dev);
+
+ printk(KERN_INFO "%s: %s; select code %d, addr %2.2x", dev->name, d->name, d->scode, dev->dev_addr[0]);
+
+ for (i=1; i<6; i++) {
+ printk(":%2.2x", dev->dev_addr[i]);
+ }
+
+ printk(", irq %d\n", d->ipl);
+
return 0;
out_release_mem_region:
struct hplance_private *lp;
int i;
- printk(KERN_INFO "%s: %s; select code %d, addr", dev->name, d->name, d->scode);
-
/* reset the board */
out_8(va+DIO_IDOFF, 0xff);
udelay(100); /* ariba! ariba! udelay! udelay! */
*/
dev->dev_addr[i] = ((in_8(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4)
| (in_8(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF);
- printk("%c%2.2x", i == 0 ? ' ' : ':', dev->dev_addr[i]);
}
lp = netdev_priv(dev);
lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;
lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;
lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;
- printk(", irq %d\n", lp->lance.irq);
}
/* This is disgusting. We have to check the DIO status register for ack every
irda_qos_bits_to_value (&self->qos);
/* Allocate twice the size to guarantee alignment */
- self->ringbuf = (void *) kmalloc (OBOE_RING_LEN << 1, GFP_KERNEL);
+ self->ringbuf = kmalloc(OBOE_RING_LEN << 1, GFP_KERNEL);
if (!self->ringbuf)
{
printk (KERN_ERR DRIVER_NAME ": can't allocate DMA buffers\n");
/* Don't change this buffer size and allocation without doing
* some heavy and complete testing. Don't ask why :-(
* Jean II */
- self->speed_buff = (char *) kmalloc(IRDA_USB_SPEED_MTU, GFP_KERNEL);
+ self->speed_buff = kmalloc(IRDA_USB_SPEED_MTU, GFP_KERNEL);
if (self->speed_buff == NULL)
goto err_out_3;
/* Allocate memory if needed */
if (self->tx_buff.truesize > 0) {
- self->tx_buff.head = (__u8 *) kmalloc(self->tx_buff.truesize,
+ self->tx_buff.head = kmalloc(self->tx_buff.truesize,
GFP_KERNEL);
if (self->tx_buff.head == NULL) {
IRDA_ERROR("%s(), can't allocate memory for "
{
struct sirtty_cb *priv = dev->priv;
struct tty_struct *tty;
- struct termios old_termios;
+ struct ktermios old_termios;
int cflag;
IRDA_ASSERT(priv != NULL, return -1;);
static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
{
- struct termios old_termios;
+ struct ktermios old_termios;
int cflag;
lock_kernel();
dev->trans_start = jiffies;
- tx_cmd = (struct tx_cmd *) kmalloc ((sizeof (struct tx_cmd) + sizeof (struct i596_tbd)), GFP_ATOMIC);
+ tx_cmd = kmalloc((sizeof (struct tx_cmd) + sizeof (struct i596_tbd)), GFP_ATOMIC);
if (tx_cmd == NULL) {
printk(KERN_WARNING "%s: i596_xmit Memory squeeze, dropping packet.\n", dev->name);
lp->stats.tx_dropped++;
if (dev->mc_count > 0) {
struct dev_mc_list *dmi;
char *cp;
- cmd = (struct i596_cmd *)kmalloc(sizeof(struct i596_cmd)+2+dev->mc_count*6, GFP_ATOMIC);
+ cmd = kmalloc(sizeof(struct i596_cmd)+2+dev->mc_count*6, GFP_ATOMIC);
if (cmd == NULL) {
printk (KERN_ERR "%s: set_multicast Memory squeeze.\n", dev->name);
return;
WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4);
for(; p < end; p++, reg++)
- *p += readl(reg);
+ *p += __raw_readl(reg);
}
-static void macb_periodic_task(void *arg)
+static void macb_periodic_task(struct work_struct *work)
{
- struct macb *bp = arg;
+ struct macb *bp = container_of(work, struct macb, periodic_task.work);
macb_update_stats(bp);
macb_check_media(bp, 1, 0);
dev->base_addr = regs->start;
- INIT_WORK(&bp->periodic_task, macb_periodic_task, bp);
+ INIT_DELAYED_WORK(&bp->periodic_task, macb_periodic_task);
mutex_init(&bp->mdio_mutex);
init_completion(&bp->mdio_complete);
/* Register access macros */
#define macb_readl(port,reg) \
- readl((port)->regs + MACB_##reg)
+ __raw_readl((port)->regs + MACB_##reg)
#define macb_writel(port,reg,value) \
- writel((value), (port)->regs + MACB_##reg)
+ __raw_writel((value), (port)->regs + MACB_##reg)
struct dma_desc {
u32 addr;
unsigned int rx_pending, tx_pending;
- struct work_struct periodic_task;
+ struct delayed_work periodic_task;
struct mutex mdio_mutex;
struct completion mdio_complete;
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.0.0"
+#define MYRI10GE_VERSION_STR "1.1.0"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
+#define MYRI10GE_ALLOC_ORDER 0
+#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
+#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
+
struct myri10ge_rx_buffer_state {
- struct sk_buff *skb;
+ struct page *page;
+ int page_offset;
DECLARE_PCI_UNMAP_ADDR(bus)
DECLARE_PCI_UNMAP_LEN(len)
};
u8 __iomem *wc_fifo; /* w/c rx dma addr fifo address */
struct mcp_kreq_ether_recv *shadow; /* host shadow of recv ring */
struct myri10ge_rx_buffer_state *info;
+ struct page *page;
+ dma_addr_t bus;
+ int page_offset;
int cnt;
+ int fill_cnt;
int alloc_fail;
int mask; /* number of rx slots -1 */
+ int watchdog_needed;
};
struct myri10ge_tx_buf {
struct myri10ge_rx_buf rx_big;
struct myri10ge_rx_done rx_done;
int small_bytes;
+ int big_bytes;
struct net_device *dev;
struct net_device_stats stats;
u8 __iomem *sram;
MODULE_PARM_DESC(myri10ge_force_firmware,
"Force firmware to assume aligned completions\n");
-static int myri10ge_skb_cross_4k = 0;
-module_param(myri10ge_skb_cross_4k, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(myri10ge_skb_cross_4k,
- "Can a small skb cross a 4KB boundary?\n");
-
static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
module_param(myri10ge_initial_mtu, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU\n");
module_param(myri10ge_debug, int, 0);
MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
+static int myri10ge_fill_thresh = 256;
+module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
+
#define MYRI10GE_FW_OFFSET 1024*1024
#define MYRI10GE_HIGHPART_TO_U32(X) \
(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
-static inline void put_be32(__be32 val, __be32 __iomem *p)
+static inline void put_be32(__be32 val, __be32 __iomem * p)
{
- __raw_writel((__force __u32)val, (__force void __iomem *)p);
+ __raw_writel((__force __u32) val, (__force void __iomem *)p);
}
static int
mb();
}
-/*
- * Set of routines to get a new receive buffer. Any buffer which
- * crosses a 4KB boundary must start on a 4KB boundary due to PCIe
- * wdma restrictions. We also try to align any smaller allocation to
- * at least a 16 byte boundary for efficiency. We assume the linux
- * memory allocator works by powers of 2, and will not return memory
- * smaller than 2KB which crosses a 4KB boundary. If it does, we fall
- * back to allocating 2x as much space as required.
- *
- * We intend to replace large (>4KB) skb allocations by using
- * pages directly and building a fraglist in the near future.
- */
-
-static inline struct sk_buff *myri10ge_alloc_big(struct net_device *dev,
- int bytes)
-{
- struct sk_buff *skb;
- unsigned long data, roundup;
-
- skb = netdev_alloc_skb(dev, bytes + 4096 + MXGEFW_PAD);
- if (skb == NULL)
- return NULL;
-
- /* Correct skb->truesize so that socket buffer
- * accounting is not confused the rounding we must
- * do to satisfy alignment constraints.
- */
- skb->truesize -= 4096;
-
- data = (unsigned long)(skb->data);
- roundup = (-data) & (4095);
- skb_reserve(skb, roundup);
- return skb;
-}
-
-/* Allocate 2x as much space as required and use whichever portion
- * does not cross a 4KB boundary */
-static inline struct sk_buff *myri10ge_alloc_small_safe(struct net_device *dev,
- unsigned int bytes)
+static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
{
- struct sk_buff *skb;
- unsigned long data, boundary;
-
- skb = netdev_alloc_skb(dev, 2 * (bytes + MXGEFW_PAD) - 1);
- if (unlikely(skb == NULL))
- return NULL;
-
- /* Correct skb->truesize so that socket buffer
- * accounting is not confused the rounding we must
- * do to satisfy alignment constraints.
- */
- skb->truesize -= bytes + MXGEFW_PAD;
-
- data = (unsigned long)(skb->data);
- boundary = (data + 4095UL) & ~4095UL;
- if ((boundary - data) >= (bytes + MXGEFW_PAD))
- return skb;
+ struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
- skb_reserve(skb, boundary - data);
- return skb;
+ if ((skb->protocol == htons(ETH_P_8021Q)) &&
+ (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
+ vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
+ skb->csum = hw_csum;
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
}
-/* Allocate just enough space, and verify that the allocated
- * space does not cross a 4KB boundary */
-static inline struct sk_buff *myri10ge_alloc_small(struct net_device *dev,
- int bytes)
+static inline void
+myri10ge_rx_skb_build(struct sk_buff *skb, u8 * va,
+ struct skb_frag_struct *rx_frags, int len, int hlen)
{
- struct sk_buff *skb;
- unsigned long roundup, data, end;
-
- skb = netdev_alloc_skb(dev, bytes + 16 + MXGEFW_PAD);
- if (unlikely(skb == NULL))
- return NULL;
-
- /* Round allocated buffer to 16 byte boundary */
- data = (unsigned long)(skb->data);
- roundup = (-data) & 15UL;
- skb_reserve(skb, roundup);
- /* Verify that the data buffer does not cross a page boundary */
- data = (unsigned long)(skb->data);
- end = data + bytes + MXGEFW_PAD - 1;
- if (unlikely(((end >> 12) != (data >> 12)) && (data & 4095UL))) {
- printk(KERN_NOTICE
- "myri10ge_alloc_small: small skb crossed 4KB boundary\n");
- myri10ge_skb_cross_4k = 1;
- dev_kfree_skb_any(skb);
- skb = myri10ge_alloc_small_safe(dev, bytes);
- }
- return skb;
+ struct skb_frag_struct *skb_frags;
+
+ skb->len = skb->data_len = len;
+ skb->truesize = len + sizeof(struct sk_buff);
+ /* attach the page(s) */
+
+ skb_frags = skb_shinfo(skb)->frags;
+ while (len > 0) {
+ memcpy(skb_frags, rx_frags, sizeof(*skb_frags));
+ len -= rx_frags->size;
+ skb_frags++;
+ rx_frags++;
+ skb_shinfo(skb)->nr_frags++;
+ }
+
+ /* pskb_may_pull is not available in irq context, but
+ * skb_pull() (for ether_pad and eth_type_trans()) requires
+ * the beginning of the packet in skb_headlen(), move it
+ * manually */
+ memcpy(skb->data, va, hlen);
+ skb_shinfo(skb)->frags[0].page_offset += hlen;
+ skb_shinfo(skb)->frags[0].size -= hlen;
+ skb->data_len -= hlen;
+ skb->tail += hlen;
+ skb_pull(skb, MXGEFW_PAD);
}
-static inline int
-myri10ge_getbuf(struct myri10ge_rx_buf *rx, struct myri10ge_priv *mgp,
- int bytes, int idx)
+static void
+myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
+ int bytes, int watchdog)
{
- struct net_device *dev = mgp->dev;
- struct pci_dev *pdev = mgp->pdev;
- struct sk_buff *skb;
- dma_addr_t bus;
- int len, retval = 0;
+ struct page *page;
+ int idx;
- bytes += VLAN_HLEN; /* account for 802.1q vlan tag */
+ if (unlikely(rx->watchdog_needed && !watchdog))
+ return;
- if ((bytes + MXGEFW_PAD) > (4096 - 16) /* linux overhead */ )
- skb = myri10ge_alloc_big(dev, bytes);
- else if (myri10ge_skb_cross_4k)
- skb = myri10ge_alloc_small_safe(dev, bytes);
- else
- skb = myri10ge_alloc_small(dev, bytes);
+ /* try to refill entire ring */
+ while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
+ idx = rx->fill_cnt & rx->mask;
- if (unlikely(skb == NULL)) {
- rx->alloc_fail++;
- retval = -ENOBUFS;
- goto done;
- }
-
- /* set len so that it only covers the area we
- * need mapped for DMA */
- len = bytes + MXGEFW_PAD;
-
- bus = pci_map_single(pdev, skb->data, len, PCI_DMA_FROMDEVICE);
- rx->info[idx].skb = skb;
- pci_unmap_addr_set(&rx->info[idx], bus, bus);
- pci_unmap_len_set(&rx->info[idx], len, len);
- rx->shadow[idx].addr_low = htonl(MYRI10GE_LOWPART_TO_U32(bus));
- rx->shadow[idx].addr_high = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
-
-done:
- /* copy 8 descriptors (64-bytes) to the mcp at a time */
- if ((idx & 7) == 7) {
- if (rx->wc_fifo == NULL)
- myri10ge_submit_8rx(&rx->lanai[idx - 7],
- &rx->shadow[idx - 7]);
- else {
- mb();
- myri10ge_pio_copy(rx->wc_fifo,
- &rx->shadow[idx - 7], 64);
+ if ((bytes < MYRI10GE_ALLOC_SIZE / 2) &&
+ (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE)) {
+ /* we can use part of previous page */
+ get_page(rx->page);
+ } else {
+ /* we need a new page */
+ page =
+ alloc_pages(GFP_ATOMIC | __GFP_COMP,
+ MYRI10GE_ALLOC_ORDER);
+ if (unlikely(page == NULL)) {
+ if (rx->fill_cnt - rx->cnt < 16)
+ rx->watchdog_needed = 1;
+ return;
+ }
+ rx->page = page;
+ rx->page_offset = 0;
+ rx->bus = pci_map_page(mgp->pdev, page, 0,
+ MYRI10GE_ALLOC_SIZE,
+ PCI_DMA_FROMDEVICE);
+ }
+ rx->info[idx].page = rx->page;
+ rx->info[idx].page_offset = rx->page_offset;
+ /* note that this is the address of the start of the
+ * page */
+ pci_unmap_addr_set(&rx->info[idx], bus, rx->bus);
+ rx->shadow[idx].addr_low =
+ htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
+ rx->shadow[idx].addr_high =
+ htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
+
+ /* start next packet on a cacheline boundary */
+ rx->page_offset += SKB_DATA_ALIGN(bytes);
+ rx->fill_cnt++;
+
+ /* copy 8 descriptors to the firmware at a time */
+ if ((idx & 7) == 7) {
+ if (rx->wc_fifo == NULL)
+ myri10ge_submit_8rx(&rx->lanai[idx - 7],
+ &rx->shadow[idx - 7]);
+ else {
+ mb();
+ myri10ge_pio_copy(rx->wc_fifo,
+ &rx->shadow[idx - 7], 64);
+ }
}
}
- return retval;
}
-static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
+static inline void
+myri10ge_unmap_rx_page(struct pci_dev *pdev,
+ struct myri10ge_rx_buffer_state *info, int bytes)
{
- struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
-
- if ((skb->protocol == htons(ETH_P_8021Q)) &&
- (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
- vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
- skb->csum = hw_csum;
- skb->ip_summed = CHECKSUM_COMPLETE;
+ /* unmap the recvd page if we're the only or last user of it */
+ if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
+ (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
+ pci_unmap_page(pdev, (pci_unmap_addr(info, bus)
+ & ~(MYRI10GE_ALLOC_SIZE - 1)),
+ MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
}
}
-static inline unsigned long
+#define MYRI10GE_HLEN 64 /* The number of bytes to copy from a
+ * page into an skb */
+
+static inline int
myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
int bytes, int len, __wsum csum)
{
- dma_addr_t bus;
struct sk_buff *skb;
- int idx, unmap_len;
+ struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
+ int i, idx, hlen, remainder;
+ struct pci_dev *pdev = mgp->pdev;
+ struct net_device *dev = mgp->dev;
+ u8 *va;
+ len += MXGEFW_PAD;
idx = rx->cnt & rx->mask;
- rx->cnt++;
+ va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
+ prefetch(va);
+ /* Fill skb_frag_struct(s) with data from our receive */
+ for (i = 0, remainder = len; remainder > 0; i++) {
+ myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
+ rx_frags[i].page = rx->info[idx].page;
+ rx_frags[i].page_offset = rx->info[idx].page_offset;
+ if (remainder < MYRI10GE_ALLOC_SIZE)
+ rx_frags[i].size = remainder;
+ else
+ rx_frags[i].size = MYRI10GE_ALLOC_SIZE;
+ rx->cnt++;
+ idx = rx->cnt & rx->mask;
+ remainder -= MYRI10GE_ALLOC_SIZE;
+ }
+
+ hlen = MYRI10GE_HLEN > len ? len : MYRI10GE_HLEN;
- /* save a pointer to the received skb */
- skb = rx->info[idx].skb;
- bus = pci_unmap_addr(&rx->info[idx], bus);
- unmap_len = pci_unmap_len(&rx->info[idx], len);
+ /* allocate an skb to attach the page(s) to. */
- /* try to replace the received skb */
- if (myri10ge_getbuf(rx, mgp, bytes, idx)) {
- /* drop the frame -- the old skbuf is re-cycled */
- mgp->stats.rx_dropped += 1;
+ skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
+ if (unlikely(skb == NULL)) {
+ mgp->stats.rx_dropped++;
+ do {
+ i--;
+ put_page(rx_frags[i].page);
+ } while (i != 0);
return 0;
}
- /* unmap the recvd skb */
- pci_unmap_single(mgp->pdev, bus, unmap_len, PCI_DMA_FROMDEVICE);
-
- /* mcp implicitly skips 1st bytes so that packet is properly
- * aligned */
- skb_reserve(skb, MXGEFW_PAD);
-
- /* set the length of the frame */
- skb_put(skb, len);
+ /* Attach the pages to the skb, and trim off any padding */
+ myri10ge_rx_skb_build(skb, va, rx_frags, len, hlen);
+ if (skb_shinfo(skb)->frags[0].size <= 0) {
+ put_page(skb_shinfo(skb)->frags[0].page);
+ skb_shinfo(skb)->nr_frags = 0;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->dev = dev;
- skb->protocol = eth_type_trans(skb, mgp->dev);
if (mgp->csum_flag) {
if ((skb->protocol == htons(ETH_P_IP)) ||
(skb->protocol == htons(ETH_P_IPV6))) {
} else
myri10ge_vlan_ip_csum(skb, csum);
}
-
netif_receive_skb(skb);
- mgp->dev->last_rx = jiffies;
+ dev->last_rx = jiffies;
return 1;
}
length, checksum);
else
rx_ok = myri10ge_rx_done(mgp, &mgp->rx_big,
- mgp->dev->mtu + ETH_HLEN,
+ mgp->big_bytes,
length, checksum);
rx_packets += rx_ok;
rx_bytes += rx_ok * (unsigned long)length;
rx_done->cnt = cnt;
mgp->stats.rx_packets += rx_packets;
mgp->stats.rx_bytes += rx_bytes;
+
+ /* restock receive rings if needed */
+ if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt < myri10ge_fill_thresh)
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
+ mgp->small_bytes + MXGEFW_PAD, 0);
+ if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt < myri10ge_fill_thresh)
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0);
+
}
static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
goto abort_with_rx_small_info;
/* Fill the receive rings */
+ mgp->rx_big.cnt = 0;
+ mgp->rx_small.cnt = 0;
+ mgp->rx_big.fill_cnt = 0;
+ mgp->rx_small.fill_cnt = 0;
+ mgp->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
+ mgp->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
+ mgp->rx_small.watchdog_needed = 0;
+ mgp->rx_big.watchdog_needed = 0;
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
+ mgp->small_bytes + MXGEFW_PAD, 0);
- for (i = 0; i <= mgp->rx_small.mask; i++) {
- status = myri10ge_getbuf(&mgp->rx_small, mgp,
- mgp->small_bytes, i);
- if (status) {
- printk(KERN_ERR
- "myri10ge: %s: alloced only %d small bufs\n",
- dev->name, i);
- goto abort_with_rx_small_ring;
- }
+ if (mgp->rx_small.fill_cnt < mgp->rx_small.mask + 1) {
+ printk(KERN_ERR "myri10ge: %s: alloced only %d small bufs\n",
+ dev->name, mgp->rx_small.fill_cnt);
+ goto abort_with_rx_small_ring;
}
- for (i = 0; i <= mgp->rx_big.mask; i++) {
- status =
- myri10ge_getbuf(&mgp->rx_big, mgp, dev->mtu + ETH_HLEN, i);
- if (status) {
- printk(KERN_ERR
- "myri10ge: %s: alloced only %d big bufs\n",
- dev->name, i);
- goto abort_with_rx_big_ring;
- }
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0);
+ if (mgp->rx_big.fill_cnt < mgp->rx_big.mask + 1) {
+ printk(KERN_ERR "myri10ge: %s: alloced only %d big bufs\n",
+ dev->name, mgp->rx_big.fill_cnt);
+ goto abort_with_rx_big_ring;
}
return 0;
abort_with_rx_big_ring:
- for (i = 0; i <= mgp->rx_big.mask; i++) {
- if (mgp->rx_big.info[i].skb != NULL)
- dev_kfree_skb_any(mgp->rx_big.info[i].skb);
- if (pci_unmap_len(&mgp->rx_big.info[i], len))
- pci_unmap_single(mgp->pdev,
- pci_unmap_addr(&mgp->rx_big.info[i],
- bus),
- pci_unmap_len(&mgp->rx_big.info[i],
- len),
- PCI_DMA_FROMDEVICE);
+ for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) {
+ int idx = i & mgp->rx_big.mask;
+ myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx],
+ mgp->big_bytes);
+ put_page(mgp->rx_big.info[idx].page);
}
abort_with_rx_small_ring:
- for (i = 0; i <= mgp->rx_small.mask; i++) {
- if (mgp->rx_small.info[i].skb != NULL)
- dev_kfree_skb_any(mgp->rx_small.info[i].skb);
- if (pci_unmap_len(&mgp->rx_small.info[i], len))
- pci_unmap_single(mgp->pdev,
- pci_unmap_addr(&mgp->rx_small.info[i],
- bus),
- pci_unmap_len(&mgp->rx_small.info[i],
- len),
- PCI_DMA_FROMDEVICE);
+ for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) {
+ int idx = i & mgp->rx_small.mask;
+ myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx],
+ mgp->small_bytes + MXGEFW_PAD);
+ put_page(mgp->rx_small.info[idx].page);
}
+
kfree(mgp->rx_big.info);
abort_with_rx_small_info:
mgp = netdev_priv(dev);
- for (i = 0; i <= mgp->rx_big.mask; i++) {
- if (mgp->rx_big.info[i].skb != NULL)
- dev_kfree_skb_any(mgp->rx_big.info[i].skb);
- if (pci_unmap_len(&mgp->rx_big.info[i], len))
- pci_unmap_single(mgp->pdev,
- pci_unmap_addr(&mgp->rx_big.info[i],
- bus),
- pci_unmap_len(&mgp->rx_big.info[i],
- len),
- PCI_DMA_FROMDEVICE);
- }
-
- for (i = 0; i <= mgp->rx_small.mask; i++) {
- if (mgp->rx_small.info[i].skb != NULL)
- dev_kfree_skb_any(mgp->rx_small.info[i].skb);
- if (pci_unmap_len(&mgp->rx_small.info[i], len))
- pci_unmap_single(mgp->pdev,
- pci_unmap_addr(&mgp->rx_small.info[i],
- bus),
- pci_unmap_len(&mgp->rx_small.info[i],
- len),
- PCI_DMA_FROMDEVICE);
+ for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) {
+ idx = i & mgp->rx_big.mask;
+ if (i == mgp->rx_big.fill_cnt - 1)
+ mgp->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
+ myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx],
+ mgp->big_bytes);
+ put_page(mgp->rx_big.info[idx].page);
}
+ for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) {
+ idx = i & mgp->rx_small.mask;
+ if (i == mgp->rx_small.fill_cnt - 1)
+ mgp->rx_small.info[idx].page_offset =
+ MYRI10GE_ALLOC_SIZE;
+ myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx],
+ mgp->small_bytes + MXGEFW_PAD);
+ put_page(mgp->rx_small.info[idx].page);
+ }
tx = &mgp->tx;
while (tx->done != tx->req) {
idx = tx->done & tx->mask;
*/
if (dev->mtu <= ETH_DATA_LEN)
- mgp->small_bytes = 128; /* enough for a TCP header */
+ /* enough for a TCP header */
+ mgp->small_bytes = (128 > SMP_CACHE_BYTES)
+ ? (128 - MXGEFW_PAD)
+ : (SMP_CACHE_BYTES - MXGEFW_PAD);
else
- mgp->small_bytes = ETH_FRAME_LEN; /* enough for an ETH_DATA_LEN frame */
+ /* enough for a vlan encapsulated ETH_DATA_LEN frame */
+ mgp->small_bytes = VLAN_ETH_FRAME_LEN;
/* Override the small buffer size? */
if (myri10ge_small_bytes > 0)
mgp->small_bytes = myri10ge_small_bytes;
- /* If the user sets an obscenely small MTU, adjust the small
- * bytes down to nearly nothing */
- if (mgp->small_bytes >= (dev->mtu + ETH_HLEN))
- mgp->small_bytes = 64;
-
/* get the lanai pointers to the send and receive rings */
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET, &cmd, 0);
mgp->rx_big.wc_fifo = NULL;
}
- status = myri10ge_allocate_rings(dev);
- if (status != 0)
- goto abort_with_nothing;
-
/* Firmware needs the big buff size as a power of 2. Lie and
* tell him the buffer is larger, because we only use 1
* buffer/pkt, and the mtu will prevent overruns.
*/
- big_pow2 = dev->mtu + ETH_HLEN + MXGEFW_PAD;
- while ((big_pow2 & (big_pow2 - 1)) != 0)
- big_pow2++;
+ big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
+ if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
+ while ((big_pow2 & (big_pow2 - 1)) != 0)
+ big_pow2++;
+ mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
+ } else {
+ big_pow2 = MYRI10GE_ALLOC_SIZE;
+ mgp->big_bytes = big_pow2;
+ }
+
+ status = myri10ge_allocate_rings(dev);
+ if (status != 0)
+ goto abort_with_nothing;
/* now give firmware buffers sizes, and MTU */
cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
struct myri10ge_cmd cmd;
struct myri10ge_priv *mgp;
struct dev_mc_list *mc_list;
- __be32 data[2] = {0, 0};
+ __be32 data[2] = { 0, 0 };
int err;
mgp = netdev_priv(dev);
static void myri10ge_watchdog(struct work_struct *work)
{
struct myri10ge_priv *mgp =
- container_of(work, struct myri10ge_priv, watchdog_work);
+ container_of(work, struct myri10ge_priv, watchdog_work);
u32 reboot;
int status;
u16 cmd, vendor;
struct myri10ge_priv *mgp;
mgp = (struct myri10ge_priv *)arg;
+
+ if (mgp->rx_small.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
+ mgp->small_bytes + MXGEFW_PAD, 1);
+ if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt >=
+ myri10ge_fill_thresh)
+ mgp->rx_small.watchdog_needed = 0;
+ }
+ if (mgp->rx_big.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 1);
+ if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt >=
+ myri10ge_fill_thresh)
+ mgp->rx_big.watchdog_needed = 0;
+ }
+
if (mgp->tx.req != mgp->tx.done &&
mgp->tx.done == mgp->watchdog_tx_done &&
mgp->watchdog_tx_req != mgp->watchdog_tx_done)
struct phy_device *dev;
/* We allocate the device, and initialize the
* default values */
- dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (NULL == dev)
return (struct phy_device*) PTR_ERR((void*)-ENOMEM);
if (w_size < DEFLATE_MIN_SIZE || w_size > DEFLATE_MAX_SIZE)
return NULL;
- state = (struct ppp_deflate_state *) kmalloc(sizeof(*state),
+ state = kmalloc(sizeof(*state),
GFP_KERNEL);
if (state == NULL)
return NULL;
if (w_size < DEFLATE_MIN_SIZE || w_size > DEFLATE_MAX_SIZE)
return NULL;
- state = (struct ppp_deflate_state *) kmalloc(sizeof(*state), GFP_KERNEL);
+ state = kmalloc(sizeof(*state), GFP_KERNEL);
if (state == NULL)
return NULL;
|| options[0] != CI_MPPE || options[1] != CILEN_MPPE)
goto out;
- state = (struct ppp_mppe_state *) kmalloc(sizeof(*state), GFP_KERNEL);
+ state = kmalloc(sizeof(*state), GFP_KERNEL);
if (state == NULL)
goto out;
struct skge_element *e;
int i;
- ring->start = kcalloc(sizeof(*e), ring->count, GFP_KERNEL);
+ ring->start = kcalloc(ring->count, sizeof(*e), GFP_KERNEL);
if (!ring->start)
return -ENOMEM;
if (len < 576 * 2)
len = 576 * 2;
- xbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
- rbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
+ xbuff = kmalloc(len + 4, GFP_ATOMIC);
+ rbuff = kmalloc(len + 4, GFP_ATOMIC);
#ifdef SL_INCLUDE_CSLIP
- cbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
+ cbuff = kmalloc(len + 4, GFP_ATOMIC);
#endif
#define SMC_IRQ_FLAGS (0)
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS (0)
-
#else
#define SMC_CAN_USE_8BIT 1
{
unsigned long flags;
- spin_lock_irqsave(ugeth_lock, flags);
+ spin_lock_irqsave(&ugeth_lock, flags);
list_add_tail(node, lh);
- spin_unlock_irqrestore(ugeth_lock, flags);
+ spin_unlock_irqrestore(&ugeth_lock, flags);
}
#endif /* CONFIG_UGETH_FILTERING */
{
unsigned long flags;
- spin_lock_irqsave(ugeth_lock, flags);
+ spin_lock_irqsave(&ugeth_lock, flags);
if (!list_empty(lh)) {
struct list_head *node = lh->next;
list_del(node);
- spin_unlock_irqrestore(ugeth_lock, flags);
+ spin_unlock_irqrestore(&ugeth_lock, flags);
return node;
} else {
- spin_unlock_irqrestore(ugeth_lock, flags);
+ spin_unlock_irqrestore(&ugeth_lock, flags);
return NULL;
}
}
mii_info->mdio_read = &read_phy_reg;
mii_info->mdio_write = &write_phy_reg;
+ spin_lock_init(&mii_info->mdio_lock);
+
ugeth->mii_info = mii_info;
spin_lock_irq(&ugeth->lock);
}
/* Finally, invert the result once to get the correct data */
crc = ~crc;
- return bitreverse(crc) >> 16;
+ return bitrev32(crc) >> 16;
}
/**
# Wan router core.
config WAN_ROUTER_DRIVERS
- bool "WAN router drivers"
+ tristate "WAN router drivers"
depends on WAN && WAN_ROUTER
---help---
Connect LAN to WAN via Linux box.
<file:Documentation/networking/wan-router.txt>.
Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
+ kernel except for how subordinate drivers may be built:
+ saying N will just cause the configurator to skip all
the questions about WAN router drivers.
If unsure, say N.
unsigned long flags;
int n;
- if ((n=iminor(file->f_dentry->d_inode)>>CARD_MINOR_BITS)
+ if ((n=iminor(file->f_path.dentry->d_inode)>>CARD_MINOR_BITS)
>= nr_cards)
return -ENODEV;
cosa = cosa_cards+n;
- if ((n=iminor(file->f_dentry->d_inode)
+ if ((n=iminor(file->f_path.dentry->d_inode)
& ((1<<CARD_MINOR_BITS)-1)) >= cosa->nchannels)
return -ENODEV;
chan = cosa->chan + n;
return NULL;
}
- sv=(struct sv11_device *)kmalloc(sizeof(struct sv11_device), GFP_KERNEL);
+ sv = kmalloc(sizeof(struct sv11_device), GFP_KERNEL);
if(!sv)
goto fail3;
if ((err = pci_enable_device(pdev)) < 0)
return err;
- card = (pc300_t *) kmalloc(sizeof(pc300_t), GFP_KERNEL);
+ card = kmalloc(sizeof(pc300_t), GFP_KERNEL);
if (card == NULL) {
printk("PC300 found at RAM 0x%016llx, "
"but could not allocate card structure.\n",
continue;
}
- new = (st_cpc_rx_buf *)kmalloc(rx_len + sizeof(st_cpc_rx_buf), GFP_ATOMIC);
+ new = kmalloc(rx_len + sizeof(st_cpc_rx_buf), GFP_ATOMIC);
if (new == 0) {
cpc_tty_rx_disc_frame(pc300chan);
continue;
unsigned char *xbuff, *rbuff;
int len = 2* newmtu;
- xbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
- rbuff = (unsigned char *) kmalloc (len + 4, GFP_ATOMIC);
+ xbuff = kmalloc(len + 4, GFP_ATOMIC);
+ rbuff = kmalloc(len + 4, GFP_ATOMIC);
if (xbuff == NULL || rbuff == NULL)
{
len = dev->mtu * 2;
- sl->rbuff = (unsigned char *) kmalloc(len + 4, GFP_KERNEL);
+ sl->rbuff = kmalloc(len + 4, GFP_KERNEL);
if (sl->rbuff == NULL) {
goto norbuff;
}
- sl->xbuff = (unsigned char *) kmalloc(len + 4, GFP_KERNEL);
+ sl->xbuff = kmalloc(len + 4, GFP_KERNEL);
if (sl->xbuff == NULL) {
goto noxbuff;
}
return NULL;
}
- tmpbuf = (char *) kmalloc(WLAN_AUTH_CHALLENGE_LEN, GFP_ATOMIC);
+ tmpbuf = kmalloc(WLAN_AUTH_CHALLENGE_LEN, GFP_ATOMIC);
if (tmpbuf == NULL) {
PDEBUG(DEBUG_AP, "AP: kmalloc failed for challenge\n");
return NULL;
0x7f0002 /* Intel PRO/Wireless 2011B (PCI) */,
};
- buf = (u8 *) kmalloc(PRISM2_PDA_SIZE, GFP_KERNEL);
+ buf = kmalloc(PRISM2_PDA_SIZE, GFP_KERNEL);
if (buf == NULL)
return NULL;
if (txdesc->sw_support) {
len = le16_to_cpu(txdesc->data_len);
if (len < PRISM2_DATA_MAXLEN) {
- *payload = (char *) kmalloc(len, GFP_ATOMIC);
+ *payload = kmalloc(len, GFP_ATOMIC);
if (*payload == NULL ||
hfa384x_from_bap(dev, BAP0, *payload, len)) {
PDEBUG(DEBUG_EXTRA, "%s: could not read TX "
p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer)
return -EINVAL;
- param = (struct prism2_hostapd_param *) kmalloc(p->length, GFP_KERNEL);
+ param = kmalloc(p->length, GFP_KERNEL);
if (param == NULL)
return -ENOMEM;
unsigned long flags;
struct hostap_tx_callback_info *entry;
- entry = (struct hostap_tx_callback_info *) kmalloc(sizeof(*entry),
+ entry = kmalloc(sizeof(*entry),
GFP_ATOMIC);
if (entry == NULL)
return 0;
if (priv->snapshot[0])
return 1;
for (i = 0; i < 0x30; i++) {
- priv->snapshot[i] = (u8 *) kmalloc(0x1000, GFP_ATOMIC);
+ priv->snapshot[i] = kmalloc(0x1000, GFP_ATOMIC);
if (!priv->snapshot[i]) {
IPW_DEBUG_INFO("%s: Error allocating snapshot "
"buffer %d\n", priv->net_dev->name, i);
p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer)
return -EINVAL;
- param = (struct prism2_hostapd_param *) kmalloc(p->length, GFP_KERNEL);
+ param = kmalloc(p->length, GFP_KERNEL);
if (param == NULL)
return -ENOMEM;
*/
static void set_baud(struct tty_struct *tty, unsigned int baudcode)
{
- struct termios old_termios = *(tty->termios);
+ struct ktermios old_termios = *(tty->termios);
tty->termios->c_cflag &= ~CBAUD; /* Clear the old baud setting */
tty->termios->c_cflag |= baudcode; /* Set the new baud setting */
tty->driver->set_termios(tty, &old_termios);
if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS)
return NULL;
- new_wavepoint=(wavepoint_history *) kmalloc(sizeof(wavepoint_history),GFP_ATOMIC);
+ new_wavepoint = kmalloc(sizeof(wavepoint_history),GFP_ATOMIC);
if(new_wavepoint==NULL)
return NULL;
/* Allocate a single memory block for values and addresses. */
count16 = 2*count;
- a16 = (zd_addr_t *)kmalloc(count16 * (sizeof(zd_addr_t) + sizeof(u16)),
+ a16 = kmalloc(count16 * (sizeof(zd_addr_t) + sizeof(u16)),
GFP_NOFS);
if (!a16) {
dev_dbg_f(zd_chip_dev(chip),
continue;
if (!(vma->vm_flags & VM_EXECUTABLE))
continue;
- cookie = fast_get_dcookie(vma->vm_file->f_dentry,
- vma->vm_file->f_vfsmnt);
+ cookie = fast_get_dcookie(vma->vm_file->f_path.dentry,
+ vma->vm_file->f_path.mnt);
break;
}
continue;
if (vma->vm_file) {
- cookie = fast_get_dcookie(vma->vm_file->f_dentry,
- vma->vm_file->f_vfsmnt);
+ cookie = fast_get_dcookie(vma->vm_file->f_path.dentry,
+ vma->vm_file->f_path.mnt);
*offset = (vma->vm_pgoff << PAGE_SHIFT) + addr -
vma->vm_start;
} else {
return NULL;
}
- isi = (struct iosapic_info *)kzalloc(sizeof(struct iosapic_info), GFP_KERNEL);
+ isi = kzalloc(sizeof(struct iosapic_info), GFP_KERNEL);
if (!isi) {
BUG();
return NULL;
Say Y here if you need PCMCIA support for your PC-style parallel
ports. If unsure, say N.
-config PARPORT_NOT_PC
- bool
-
config PARPORT_IP32
tristate "SGI IP32 builtin port (EXPERIMENTAL)"
depends on SGI_IP32 && PARPORT && EXPERIMENTAL
transfer modes. Also say Y if you want device ID information to
appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+config PARPORT_NOT_PC
+ bool
+
endmenu
config HOTPLUG_PCI_ACPI
tristate "ACPI PCI Hotplug driver"
- depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI)
+ depends on HOTPLUG_PCI
+ depends on (!ACPI_DOCK && ACPI) || (ACPI_DOCK)
help
Say Y here if you have a system that supports PCI Hotplug using
ACPI.
return 2;
while (nummem--) {
- mem_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
+ mem_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
if (!mem_node)
break;
}
while (numpmem--) {
- p_mem_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
+ p_mem_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
if (!p_mem_node)
break;
}
while (numio--) {
- io_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
+ io_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
if (!io_node)
break;
}
while (numbus--) {
- bus_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
+ bus_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
if (!bus_node)
break;
DBG_ENTER_ROUTINE
spin_lock_init(&list_lock);
- php_ctlr = (struct php_ctlr_state_s *) kmalloc(sizeof(struct php_ctlr_state_s), GFP_KERNEL);
+ php_ctlr = kmalloc(sizeof(struct php_ctlr_state_s), GFP_KERNEL);
if (!php_ctlr) { /* allocate controller state data */
err("%s: HPC controller memory allocation error!\n", __FUNCTION__);
{
struct aer_rpc *rpc;
- if (!(rpc = (struct aer_rpc *)kmalloc(sizeof(struct aer_rpc),
+ if (!(rpc = kmalloc(sizeof(struct aer_rpc),
GFP_KERNEL)))
return NULL;
proc_bus_pci_lseek(struct file *file, loff_t off, int whence)
{
loff_t new = -1;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
mutex_lock(&inode->i_mutex);
switch (whence) {
static ssize_t
proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
{
- const struct inode *ino = file->f_dentry->d_inode;
+ const struct inode *ino = file->f_path.dentry->d_inode;
const struct proc_dir_entry *dp = PDE(ino);
struct pci_dev *dev = dp->data;
unsigned int pos = *ppos;
static ssize_t
proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, loff_t *ppos)
{
- const struct inode *ino = file->f_dentry->d_inode;
+ const struct inode *ino = file->f_path.dentry->d_inode;
const struct proc_dir_entry *dp = PDE(ino);
struct pci_dev *dev = dp->data;
int pos = *ppos;
#ifdef HAVE_PCI_MMAP
static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
const struct proc_dir_entry *dp = PDE(inode);
struct pci_dev *dev = dp->data;
struct pci_filp_private *fpriv = file->private_data;
if (!io)
return -ENODEV;
- cf = kcalloc(1, sizeof *cf, GFP_KERNEL);
+ cf = kzalloc(sizeof *cf, GFP_KERNEL);
if (!cf)
return -ENOMEM;
if (irq < 0)
return -EINVAL;
- cf = kcalloc(1, sizeof *cf, GFP_KERNEL);
+ cf = kzalloc(sizeof *cf, GFP_KERNEL);
if (!cf)
return -ENOMEM;
init_timer(&cf->timer);
user_info_t *user;
int ret;
- ds_dbg(2, "ds_read(socket %d)\n", iminor(file->f_dentry->d_inode));
+ ds_dbg(2, "ds_read(socket %d)\n", iminor(file->f_path.dentry->d_inode));
if (count < 4)
return -EINVAL;
static ssize_t ds_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- ds_dbg(2, "ds_write(socket %d)\n", iminor(file->f_dentry->d_inode));
+ ds_dbg(2, "ds_write(socket %d)\n", iminor(file->f_path.dentry->d_inode));
if (count != 4)
return -EINVAL;
struct pcmcia_socket *s;
user_info_t *user;
- ds_dbg(2, "ds_poll(socket %d)\n", iminor(file->f_dentry->d_inode));
+ ds_dbg(2, "ds_poll(socket %d)\n", iminor(file->f_path.dentry->d_inode));
user = file->private_data;
if (CHECK_USER(user))
struct pnp_id * id;
if (!dev)
return;
- id = kcalloc(1, sizeof(struct pnp_id), GFP_KERNEL);
+ id = kzalloc(sizeof(struct pnp_id), GFP_KERNEL);
if (!id)
return;
sprintf(id->id, "%c%c%c%x%x%x%x",
struct pnp_dev *dev;
isapnp_peek(tmp, size);
- dev = kcalloc(1, sizeof(struct pnp_dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct pnp_dev), GFP_KERNEL);
if (!dev)
return NULL;
dev->number = number;
unsigned long bits;
isapnp_peek(tmp, size);
- irq = kcalloc(1, sizeof(struct pnp_irq), GFP_KERNEL);
+ irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL);
if (!irq)
return;
bits = (tmp[1] << 8) | tmp[0];
struct pnp_dma *dma;
isapnp_peek(tmp, size);
- dma = kcalloc(1, sizeof(struct pnp_dma), GFP_KERNEL);
+ dma = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL);
if (!dma)
return;
dma->map = tmp[0];
struct pnp_port *port;
isapnp_peek(tmp, size);
- port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
+ port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL);
if (!port)
return;
port->min = (tmp[2] << 8) | tmp[1];
struct pnp_port *port;
isapnp_peek(tmp, size);
- port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
+ port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL);
if (!port)
return;
port->min = port->max = (tmp[1] << 8) | tmp[0];
struct pnp_mem *mem;
isapnp_peek(tmp, size);
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = ((tmp[2] << 8) | tmp[1]) << 8;
struct pnp_mem *mem;
isapnp_peek(tmp, size);
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = (tmp[4] << 24) | (tmp[3] << 16) | (tmp[2] << 8) | tmp[1];
struct pnp_mem *mem;
isapnp_peek(tmp, size);
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = mem->max = (tmp[4] << 24) | (tmp[3] << 16) | (tmp[2] << 8) | tmp[1];
static void isapnp_parse_card_id(struct pnp_card * card, unsigned short vendor, unsigned short device)
{
- struct pnp_id * id = kcalloc(1, sizeof(struct pnp_id), GFP_KERNEL);
+ struct pnp_id * id = kzalloc(sizeof(struct pnp_id), GFP_KERNEL);
if (!id)
return;
sprintf(id->id, "%c%c%c%x%x%x%x",
header[4], header[5], header[6], header[7], header[8]);
printk(KERN_DEBUG "checksum = 0x%x\n", checksum);
#endif
- if ((card = kcalloc(1, sizeof(struct pnp_card), GFP_KERNEL)) == NULL)
+ if ((card = kzalloc(sizeof(struct pnp_card), GFP_KERNEL)) == NULL)
continue;
card->number = csn;
static ssize_t isapnp_proc_bus_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
{
- struct inode *ino = file->f_dentry->d_inode;
+ struct inode *ino = file->f_path.dentry->d_inode;
struct proc_dir_entry *dp = PDE(ino);
struct pnp_dev *dev = dp->data;
int pos = *ppos;
return 0;
pnp_dbg("ACPI device : hid %s", acpi_device_hid(device));
- dev = kcalloc(1, sizeof(struct pnp_dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct pnp_dev), GFP_KERNEL);
if (!dev) {
pnp_err("Out of memory");
return -ENOMEM;
dev->number = num;
/* set the initial values for the PnP device */
- dev_id = kcalloc(1, sizeof(struct pnp_id), GFP_KERNEL);
+ dev_id = kzalloc(sizeof(struct pnp_id), GFP_KERNEL);
if (!dev_id)
goto err;
pnpidacpi_to_pnpid(acpi_device_hid(device), dev_id->id);
for (i = 0; i < cid_list->count; i++) {
if (!ispnpidacpi(cid_list->id[i].value))
continue;
- dev_id = kcalloc(1, sizeof(struct pnp_id), GFP_KERNEL);
+ dev_id = kzalloc(sizeof(struct pnp_id), GFP_KERNEL);
if (!dev_id)
continue;
if (p->channel_count == 0)
return;
- dma = kcalloc(1, sizeof(struct pnp_dma), GFP_KERNEL);
+ dma = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL);
if (!dma)
return;
if (p->interrupt_count == 0)
return;
- irq = kcalloc(1, sizeof(struct pnp_irq), GFP_KERNEL);
+ irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL);
if (!irq)
return;
if (p->interrupt_count == 0)
return;
- irq = kcalloc(1, sizeof(struct pnp_irq), GFP_KERNEL);
+ irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL);
if (!irq)
return;
if (io->address_length == 0)
return;
- port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
+ port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL);
if (!port)
return;
port->min = io->minimum;
if (io->address_length == 0)
return;
- port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
+ port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL);
if (!port)
return;
port->min = port->max = io->address;
if (p->address_length == 0)
return;
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = p->minimum;
if (p->address_length == 0)
return;
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = p->minimum;
if (p->address_length == 0)
return;
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = mem->max = p->address;
return;
if (p->resource_type == ACPI_MEMORY_RANGE) {
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = mem->max = p->minimum;
ACPI_READ_WRITE_MEMORY) ? IORESOURCE_MEM_WRITEABLE : 0;
pnp_register_mem_resource(option, mem);
} else if (p->resource_type == ACPI_IO_RANGE) {
- port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
+ port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL);
if (!port)
return;
port->min = port->max = p->minimum;
if (!res_cnt)
return -EINVAL;
buffer->length = sizeof(struct acpi_resource) * (res_cnt + 1) + 1;
- buffer->pointer = kcalloc(1, buffer->length - 1, GFP_KERNEL);
+ buffer->pointer = kzalloc(buffer->length - 1, GFP_KERNEL);
if (!buffer->pointer)
return -ENOMEM;
pnp_dbg("Res cnt %d", res_cnt);
if (!current->fs->root) {
return -EAGAIN;
}
- if (!(envp = (char **) kcalloc (20, sizeof (char *), GFP_KERNEL))) {
+ if (!(envp = kcalloc(20, sizeof (char *), GFP_KERNEL))) {
return -ENOMEM;
}
- if (!(buf = kcalloc (1, 256, GFP_KERNEL))) {
+ if (!(buf = kzalloc(256, GFP_KERNEL))) {
kfree (envp);
return -ENOMEM;
}
if(!pnpbios_is_dynamic(dev))
return -EPERM;
- node = kcalloc(1, node_info.max_node_size, GFP_KERNEL);
+ node = kzalloc(node_info.max_node_size, GFP_KERNEL);
if (!node)
return -1;
if (pnp_bios_get_dev_node(&nodenum, (char )PNPMODE_DYNAMIC, node)) {
if (!pnpbios_is_dynamic(dev))
return -EPERM;
- node = kcalloc(1, node_info.max_node_size, GFP_KERNEL);
+ node = kzalloc(node_info.max_node_size, GFP_KERNEL);
if (!node)
return -1;
if (pnp_bios_get_dev_node(&nodenum, (char )PNPMODE_DYNAMIC, node)) {
if(dev->flags & PNPBIOS_NO_DISABLE || !pnpbios_is_dynamic(dev))
return -EPERM;
- node = kcalloc(1, node_info.max_node_size, GFP_KERNEL);
+ node = kzalloc(node_info.max_node_size, GFP_KERNEL);
if (!node)
return -ENOMEM;
}
/* set the initial values for the PnP device */
- dev_id = kcalloc(1, sizeof(struct pnp_id), GFP_KERNEL);
+ dev_id = kzalloc(sizeof(struct pnp_id), GFP_KERNEL);
if (!dev_id)
return -1;
pnpid32_to_pnpid(node->eisa_id,id);
struct pnp_bios_node *node;
struct pnp_dev *dev;
- node = kcalloc(1, node_info.max_node_size, GFP_KERNEL);
+ node = kzalloc(node_info.max_node_size, GFP_KERNEL);
if (!node)
return;
break;
}
nodes_got++;
- dev = kcalloc(1, sizeof (struct pnp_dev), GFP_KERNEL);
+ dev = kzalloc(sizeof (struct pnp_dev), GFP_KERNEL);
if (!dev)
break;
if(insert_device(dev,node)<0)
return -EFBIG;
}
- tmpbuf = kcalloc(1, escd.escd_size, GFP_KERNEL);
+ tmpbuf = kzalloc(escd.escd_size, GFP_KERNEL);
if (!tmpbuf) return -ENOMEM;
if (pnp_bios_read_escd(tmpbuf, escd.nv_storage_base)) {
if (pos >= 0xff)
return 0;
- node = kcalloc(1, node_info.max_node_size, GFP_KERNEL);
+ node = kzalloc(node_info.max_node_size, GFP_KERNEL);
if (!node) return -ENOMEM;
for (nodenum=pos; nodenum<0xff; ) {
u8 nodenum = (long)data;
int len;
- node = kcalloc(1, node_info.max_node_size, GFP_KERNEL);
+ node = kzalloc(node_info.max_node_size, GFP_KERNEL);
if (!node) return -ENOMEM;
if (pnp_bios_get_dev_node(&nodenum, boot, node)) {
kfree(node);
u8 nodenum = (long)data;
int ret = count;
- node = kcalloc(1, node_info.max_node_size, GFP_KERNEL);
+ node = kzalloc(node_info.max_node_size, GFP_KERNEL);
if (!node)
return -ENOMEM;
if (pnp_bios_get_dev_node(&nodenum, boot, node)) {
pnpbios_parse_mem_option(unsigned char *p, int size, struct pnp_option *option)
{
struct pnp_mem * mem;
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = ((p[5] << 8) | p[4]) << 8;
pnpbios_parse_mem32_option(unsigned char *p, int size, struct pnp_option *option)
{
struct pnp_mem * mem;
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = (p[7] << 24) | (p[6] << 16) | (p[5] << 8) | p[4];
pnpbios_parse_fixed_mem32_option(unsigned char *p, int size, struct pnp_option *option)
{
struct pnp_mem * mem;
- mem = kcalloc(1, sizeof(struct pnp_mem), GFP_KERNEL);
+ mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL);
if (!mem)
return;
mem->min = mem->max = (p[7] << 24) | (p[6] << 16) | (p[5] << 8) | p[4];
struct pnp_irq * irq;
unsigned long bits;
- irq = kcalloc(1, sizeof(struct pnp_irq), GFP_KERNEL);
+ irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL);
if (!irq)
return;
bits = (p[2] << 8) | p[1];
pnpbios_parse_dma_option(unsigned char *p, int size, struct pnp_option *option)
{
struct pnp_dma * dma;
- dma = kcalloc(1, sizeof(struct pnp_dma), GFP_KERNEL);
+ dma = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL);
if (!dma)
return;
dma->map = p[1];
pnpbios_parse_port_option(unsigned char *p, int size, struct pnp_option *option)
{
struct pnp_port * port;
- port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
+ port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL);
if (!port)
return;
port->min = (p[3] << 8) | p[2];
pnpbios_parse_fixed_port_option(unsigned char *p, int size, struct pnp_option *option)
{
struct pnp_port * port;
- port = kcalloc(1, sizeof(struct pnp_port), GFP_KERNEL);
+ port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL);
if (!port)
return;
port->min = port->max = (p[2] << 8) | p[1];
case SMALL_TAG_COMPATDEVID: /* compatible ID */
if (len != 4)
goto len_err;
- dev_id = kcalloc(1, sizeof (struct pnp_id), GFP_KERNEL);
+ dev_id = kzalloc(sizeof (struct pnp_id), GFP_KERNEL);
if (!dev_id)
return NULL;
memset(dev_id, 0, sizeof(struct pnp_id));
obj-y += system-bus.o
+obj-$(CONFIG_PS3_VUART) += vuart.o
--- /dev/null
+/*
+ * PS3 virtual uart
+ *
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <asm/ps3.h>
+
+#include <asm/lv1call.h>
+#include <asm/bitops.h>
+
+#include "vuart.h"
+
+MODULE_AUTHOR("Sony Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ps3 vuart");
+
+/**
+ * vuart - An inter-partition data link service.
+ * port 0: PS3 AV Settings.
+ * port 2: PS3 System Manager.
+ *
+ * The vuart provides a bi-directional byte stream data link between logical
+ * partitions. Its primary role is as a communications link between the guest
+ * OS and the system policy module. The current HV does not support any
+ * connections other than those listed.
+ */
+
+enum {PORT_COUNT = 3,};
+
+enum vuart_param {
+ PARAM_TX_TRIGGER = 0,
+ PARAM_RX_TRIGGER = 1,
+ PARAM_INTERRUPT_MASK = 2,
+ PARAM_RX_BUF_SIZE = 3, /* read only */
+ PARAM_RX_BYTES = 4, /* read only */
+ PARAM_TX_BUF_SIZE = 5, /* read only */
+ PARAM_TX_BYTES = 6, /* read only */
+ PARAM_INTERRUPT_STATUS = 7, /* read only */
+};
+
+enum vuart_interrupt_bit {
+ INTERRUPT_BIT_TX = 0,
+ INTERRUPT_BIT_RX = 1,
+ INTERRUPT_BIT_DISCONNECT = 2,
+};
+
+enum vuart_interrupt_mask {
+ INTERRUPT_MASK_TX = 1,
+ INTERRUPT_MASK_RX = 2,
+ INTERRUPT_MASK_DISCONNECT = 4,
+};
+
+/**
+ * struct ports_bmp - bitmap indicating ports needing service.
+ *
+ * A 256 bit read only bitmap indicating ports needing service. Do not write
+ * to these bits. Must not cross a page boundary.
+ */
+
+struct ports_bmp {
+ u64 status;
+ u64 unused[3];
+} __attribute__ ((aligned (32)));
+
+/* redefine dev_dbg to do a syntax check */
+
+#if !defined(DEBUG)
+#undef dev_dbg
+static inline int __attribute__ ((format (printf, 2, 3))) dev_dbg(
+ const struct device *_dev, const char *fmt, ...) {return 0;}
+#endif
+
+#define dump_ports_bmp(_b) _dump_ports_bmp(_b, __func__, __LINE__)
+static void __attribute__ ((unused)) _dump_ports_bmp(
+ const struct ports_bmp* bmp, const char* func, int line)
+{
+ pr_debug("%s:%d: ports_bmp: %016lxh\n", func, line, bmp->status);
+}
+
+static int ps3_vuart_match_id_to_port(enum ps3_match_id match_id,
+ unsigned int *port_number)
+{
+ switch(match_id) {
+ case PS3_MATCH_ID_AV_SETTINGS:
+ *port_number = 0;
+ return 0;
+ case PS3_MATCH_ID_SYSTEM_MANAGER:
+ *port_number = 2;
+ return 0;
+ default:
+ WARN_ON(1);
+ *port_number = UINT_MAX;
+ return -EINVAL;
+ };
+}
+
+#define dump_port_params(_b) _dump_port_params(_b, __func__, __LINE__)
+static void __attribute__ ((unused)) _dump_port_params(unsigned int port_number,
+ const char* func, int line)
+{
+#if defined(DEBUG)
+ static const char *strings[] = {
+ "tx_trigger ",
+ "rx_trigger ",
+ "interrupt_mask ",
+ "rx_buf_size ",
+ "rx_bytes ",
+ "tx_buf_size ",
+ "tx_bytes ",
+ "interrupt_status",
+ };
+ int result;
+ unsigned int i;
+ u64 value;
+
+ for (i = 0; i < ARRAY_SIZE(strings); i++) {
+ result = lv1_get_virtual_uart_param(port_number, i, &value);
+
+ if (result) {
+ pr_debug("%s:%d: port_%u: %s failed: %s\n", func, line,
+ port_number, strings[i], ps3_result(result));
+ continue;
+ }
+ pr_debug("%s:%d: port_%u: %s = %lxh\n",
+ func, line, port_number, strings[i], value);
+ }
+#endif
+}
+
+struct vuart_triggers {
+ unsigned long rx;
+ unsigned long tx;
+};
+
+int ps3_vuart_get_triggers(struct ps3_vuart_port_device *dev,
+ struct vuart_triggers *trig)
+{
+ int result;
+ unsigned long size;
+ unsigned long val;
+
+ result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_TX_TRIGGER, &trig->tx);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: tx_trigger failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_RX_BUF_SIZE, &size);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: tx_buf_size failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_RX_TRIGGER, &val);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: rx_trigger failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ trig->rx = size - val;
+
+ dev_dbg(&dev->core, "%s:%d: tx %lxh, rx %lxh\n", __func__, __LINE__,
+ trig->tx, trig->rx);
+
+ return result;
+}
+
+int ps3_vuart_set_triggers(struct ps3_vuart_port_device *dev, unsigned int tx,
+ unsigned int rx)
+{
+ int result;
+ unsigned long size;
+
+ result = lv1_set_virtual_uart_param(dev->port_number,
+ PARAM_TX_TRIGGER, tx);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: tx_trigger failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_RX_BUF_SIZE, &size);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: tx_buf_size failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ result = lv1_set_virtual_uart_param(dev->port_number,
+ PARAM_RX_TRIGGER, size - rx);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: rx_trigger failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ dev_dbg(&dev->core, "%s:%d: tx %xh, rx %xh\n", __func__, __LINE__,
+ tx, rx);
+
+ return result;
+}
+
+static int ps3_vuart_get_rx_bytes_waiting(struct ps3_vuart_port_device *dev,
+ unsigned long *bytes_waiting)
+{
+ int result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_RX_BYTES, bytes_waiting);
+
+ if (result)
+ dev_dbg(&dev->core, "%s:%d: rx_bytes failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+
+ dev_dbg(&dev->core, "%s:%d: %lxh\n", __func__, __LINE__,
+ *bytes_waiting);
+ return result;
+}
+
+static int ps3_vuart_set_interrupt_mask(struct ps3_vuart_port_device *dev,
+ unsigned long mask)
+{
+ int result;
+
+ dev_dbg(&dev->core, "%s:%d: %lxh\n", __func__, __LINE__, mask);
+
+ dev->interrupt_mask = mask;
+
+ result = lv1_set_virtual_uart_param(dev->port_number,
+ PARAM_INTERRUPT_MASK, dev->interrupt_mask);
+
+ if (result)
+ dev_dbg(&dev->core, "%s:%d: interrupt_mask failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+
+ return result;
+}
+
+static int ps3_vuart_get_interrupt_mask(struct ps3_vuart_port_device *dev,
+ unsigned long *status)
+{
+ int result = lv1_get_virtual_uart_param(dev->port_number,
+ PARAM_INTERRUPT_STATUS, status);
+
+ if (result)
+ dev_dbg(&dev->core, "%s:%d: interrupt_status failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+
+ dev_dbg(&dev->core, "%s:%d: m %lxh, s %lxh, m&s %lxh\n",
+ __func__, __LINE__, dev->interrupt_mask, *status,
+ dev->interrupt_mask & *status);
+
+ return result;
+}
+
+int ps3_vuart_enable_interrupt_tx(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_TX) ? 0
+ : ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ | INTERRUPT_MASK_TX);
+}
+
+int ps3_vuart_enable_interrupt_rx(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_RX) ? 0
+ : ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ | INTERRUPT_MASK_RX);
+}
+
+int ps3_vuart_enable_interrupt_disconnect(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_DISCONNECT) ? 0
+ : ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ | INTERRUPT_MASK_DISCONNECT);
+}
+
+int ps3_vuart_disable_interrupt_tx(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_TX)
+ ? ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ & ~INTERRUPT_MASK_TX) : 0;
+}
+
+int ps3_vuart_disable_interrupt_rx(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_RX)
+ ? ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ & ~INTERRUPT_MASK_RX) : 0;
+}
+
+int ps3_vuart_disable_interrupt_disconnect(struct ps3_vuart_port_device *dev)
+{
+ return (dev->interrupt_mask & INTERRUPT_MASK_DISCONNECT)
+ ? ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ & ~INTERRUPT_MASK_DISCONNECT) : 0;
+}
+
+/**
+ * ps3_vuart_raw_write - Low level write helper.
+ *
+ * Do not call ps3_vuart_raw_write directly, use ps3_vuart_write.
+ */
+
+static int ps3_vuart_raw_write(struct ps3_vuart_port_device *dev,
+ const void* buf, unsigned int bytes, unsigned long *bytes_written)
+{
+ int result;
+
+ dev_dbg(&dev->core, "%s:%d: %xh\n", __func__, __LINE__, bytes);
+
+ result = lv1_write_virtual_uart(dev->port_number,
+ ps3_mm_phys_to_lpar(__pa(buf)), bytes, bytes_written);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: lv1_write_virtual_uart failed: "
+ "%s\n", __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ dev->stats.bytes_written += *bytes_written;
+
+ dev_dbg(&dev->core, "%s:%d: wrote %lxh/%xh=>%lxh\n", __func__,
+ __LINE__, *bytes_written, bytes, dev->stats.bytes_written);
+
+ return result;
+}
+
+/**
+ * ps3_vuart_raw_read - Low level read helper.
+ *
+ * Do not call ps3_vuart_raw_read directly, use ps3_vuart_read.
+ */
+
+static int ps3_vuart_raw_read(struct ps3_vuart_port_device *dev, void* buf,
+ unsigned int bytes, unsigned long *bytes_read)
+{
+ int result;
+
+ dev_dbg(&dev->core, "%s:%d: %xh\n", __func__, __LINE__, bytes);
+
+ result = lv1_read_virtual_uart(dev->port_number,
+ ps3_mm_phys_to_lpar(__pa(buf)), bytes, bytes_read);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: lv1_read_virtual_uart failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ dev->stats.bytes_read += *bytes_read;
+
+ dev_dbg(&dev->core, "%s:%d: read %lxh/%xh=>%lxh\n", __func__, __LINE__,
+ *bytes_read, bytes, dev->stats.bytes_read);
+
+ return result;
+}
+
+/**
+ * struct list_buffer - An element for a port device fifo buffer list.
+ */
+
+struct list_buffer {
+ struct list_head link;
+ const unsigned char *head;
+ const unsigned char *tail;
+ unsigned long dbg_number;
+ unsigned char data[];
+};
+
+/**
+ * ps3_vuart_write - the entry point for writing data to a port
+ *
+ * If the port is idle on entry as much of the incoming data is written to
+ * the port as the port will accept. Otherwise a list buffer is created
+ * and any remaning incoming data is copied to that buffer. The buffer is
+ * then enqueued for transmision via the transmit interrupt.
+ */
+
+int ps3_vuart_write(struct ps3_vuart_port_device *dev, const void* buf,
+ unsigned int bytes)
+{
+ static unsigned long dbg_number;
+ int result;
+ unsigned long flags;
+ struct list_buffer *lb;
+
+ dev_dbg(&dev->core, "%s:%d: %u(%xh) bytes\n", __func__, __LINE__,
+ bytes, bytes);
+
+ spin_lock_irqsave(&dev->tx_list.lock, flags);
+
+ if (list_empty(&dev->tx_list.head)) {
+ unsigned long bytes_written;
+
+ result = ps3_vuart_raw_write(dev, buf, bytes, &bytes_written);
+
+ spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+
+ if (result) {
+ dev_dbg(&dev->core,
+ "%s:%d: ps3_vuart_raw_write failed\n",
+ __func__, __LINE__);
+ return result;
+ }
+
+ if (bytes_written == bytes) {
+ dev_dbg(&dev->core, "%s:%d: wrote %xh bytes\n",
+ __func__, __LINE__, bytes);
+ return 0;
+ }
+
+ bytes -= bytes_written;
+ buf += bytes_written;
+ } else
+ spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+
+ lb = kmalloc(sizeof(struct list_buffer) + bytes, GFP_KERNEL);
+
+ if (!lb) {
+ return -ENOMEM;
+ }
+
+ memcpy(lb->data, buf, bytes);
+ lb->head = lb->data;
+ lb->tail = lb->data + bytes;
+ lb->dbg_number = ++dbg_number;
+
+ spin_lock_irqsave(&dev->tx_list.lock, flags);
+ list_add_tail(&lb->link, &dev->tx_list.head);
+ ps3_vuart_enable_interrupt_tx(dev);
+ spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+
+ dev_dbg(&dev->core, "%s:%d: queued buf_%lu, %xh bytes\n",
+ __func__, __LINE__, lb->dbg_number, bytes);
+
+ return 0;
+}
+
+/**
+ * ps3_vuart_read - the entry point for reading data from a port
+ *
+ * If enough bytes to satisfy the request are held in the buffer list those
+ * bytes are dequeued and copied to the caller's buffer. Emptied list buffers
+ * are retiered. If the request cannot be statified by bytes held in the list
+ * buffers -EAGAIN is returned.
+ */
+
+int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
+ unsigned int bytes)
+{
+ unsigned long flags;
+ struct list_buffer *lb, *n;
+ unsigned long bytes_read;
+
+ dev_dbg(&dev->core, "%s:%d: %u(%xh) bytes\n", __func__, __LINE__,
+ bytes, bytes);
+
+ spin_lock_irqsave(&dev->rx_list.lock, flags);
+
+ if (dev->rx_list.bytes_held < bytes) {
+ spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+ dev_dbg(&dev->core, "%s:%d: starved for %lxh bytes\n",
+ __func__, __LINE__, bytes - dev->rx_list.bytes_held);
+ return -EAGAIN;
+ }
+
+ list_for_each_entry_safe(lb, n, &dev->rx_list.head, link) {
+ bytes_read = min((unsigned int)(lb->tail - lb->head), bytes);
+
+ memcpy(buf, lb->head, bytes_read);
+ buf += bytes_read;
+ bytes -= bytes_read;
+ dev->rx_list.bytes_held -= bytes_read;
+
+ if (bytes_read < lb->tail - lb->head) {
+ lb->head += bytes_read;
+ spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+
+ dev_dbg(&dev->core,
+ "%s:%d: dequeued buf_%lu, %lxh bytes\n",
+ __func__, __LINE__, lb->dbg_number, bytes_read);
+ return 0;
+ }
+
+ dev_dbg(&dev->core, "%s:%d free buf_%lu\n", __func__, __LINE__,
+ lb->dbg_number);
+
+ list_del(&lb->link);
+ kfree(lb);
+ }
+ spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+
+ dev_dbg(&dev->core, "%s:%d: dequeued buf_%lu, %xh bytes\n",
+ __func__, __LINE__, lb->dbg_number, bytes);
+
+ return 0;
+}
+
+/**
+ * ps3_vuart_handle_interrupt_tx - third stage transmit interrupt handler
+ *
+ * Services the transmit interrupt for the port. Writes as much data from the
+ * buffer list as the port will accept. Retires any emptied list buffers and
+ * adjusts the final list buffer state for a partial write.
+ */
+
+static int ps3_vuart_handle_interrupt_tx(struct ps3_vuart_port_device *dev)
+{
+ int result = 0;
+ unsigned long flags;
+ struct list_buffer *lb, *n;
+ unsigned long bytes_total = 0;
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ spin_lock_irqsave(&dev->tx_list.lock, flags);
+
+ list_for_each_entry_safe(lb, n, &dev->tx_list.head, link) {
+
+ unsigned long bytes_written;
+
+ result = ps3_vuart_raw_write(dev, lb->head, lb->tail - lb->head,
+ &bytes_written);
+
+ if (result) {
+ dev_dbg(&dev->core,
+ "%s:%d: ps3_vuart_raw_write failed\n",
+ __func__, __LINE__);
+ break;
+ }
+
+ bytes_total += bytes_written;
+
+ if (bytes_written < lb->tail - lb->head) {
+ lb->head += bytes_written;
+ dev_dbg(&dev->core,
+ "%s:%d cleared buf_%lu, %lxh bytes\n",
+ __func__, __LINE__, lb->dbg_number,
+ bytes_written);
+ goto port_full;
+ }
+
+ dev_dbg(&dev->core, "%s:%d free buf_%lu\n", __func__, __LINE__,
+ lb->dbg_number);
+
+ list_del(&lb->link);
+ kfree(lb);
+ }
+
+ ps3_vuart_disable_interrupt_tx(dev);
+port_full:
+ spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+ dev_dbg(&dev->core, "%s:%d wrote %lxh bytes total\n",
+ __func__, __LINE__, bytes_total);
+ return result;
+}
+
+/**
+ * ps3_vuart_handle_interrupt_rx - third stage receive interrupt handler
+ *
+ * Services the receive interrupt for the port. Creates a list buffer and
+ * copies all waiting port data to that buffer and enqueues the buffer in the
+ * buffer list. Buffer list data is dequeued via ps3_vuart_read.
+ */
+
+static int ps3_vuart_handle_interrupt_rx(struct ps3_vuart_port_device *dev)
+{
+ static unsigned long dbg_number;
+ int result = 0;
+ unsigned long flags;
+ struct list_buffer *lb;
+ unsigned long bytes;
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ result = ps3_vuart_get_rx_bytes_waiting(dev, &bytes);
+
+ if (result)
+ return -EIO;
+
+ BUG_ON(!bytes);
+
+ /* add some extra space for recently arrived data */
+
+ bytes += 128;
+
+ lb = kmalloc(sizeof(struct list_buffer) + bytes, GFP_ATOMIC);
+
+ if (!lb)
+ return -ENOMEM;
+
+ ps3_vuart_raw_read(dev, lb->data, bytes, &bytes);
+
+ lb->head = lb->data;
+ lb->tail = lb->data + bytes;
+ lb->dbg_number = ++dbg_number;
+
+ spin_lock_irqsave(&dev->rx_list.lock, flags);
+ list_add_tail(&lb->link, &dev->rx_list.head);
+ dev->rx_list.bytes_held += bytes;
+ spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+
+ dev_dbg(&dev->core, "%s:%d: queued buf_%lu, %lxh bytes\n",
+ __func__, __LINE__, lb->dbg_number, bytes);
+
+ return 0;
+}
+
+static int ps3_vuart_handle_interrupt_disconnect(
+ struct ps3_vuart_port_device *dev)
+{
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+ BUG_ON("no support");
+ return -1;
+}
+
+/**
+ * ps3_vuart_handle_port_interrupt - second stage interrupt handler
+ *
+ * Services any pending interrupt types for the port. Passes control to the
+ * third stage type specific interrupt handler. Returns control to the first
+ * stage handler after one iteration.
+ */
+
+static int ps3_vuart_handle_port_interrupt(struct ps3_vuart_port_device *dev)
+{
+ int result;
+ unsigned long status;
+
+ result = ps3_vuart_get_interrupt_mask(dev, &status);
+
+ if (result)
+ return result;
+
+ dev_dbg(&dev->core, "%s:%d: status: %lxh\n", __func__, __LINE__,
+ status);
+
+ if (status & INTERRUPT_MASK_DISCONNECT) {
+ dev->stats.disconnect_interrupts++;
+ result = ps3_vuart_handle_interrupt_disconnect(dev);
+ if (result)
+ ps3_vuart_disable_interrupt_disconnect(dev);
+ }
+
+ if (status & INTERRUPT_MASK_TX) {
+ dev->stats.tx_interrupts++;
+ result = ps3_vuart_handle_interrupt_tx(dev);
+ if (result)
+ ps3_vuart_disable_interrupt_tx(dev);
+ }
+
+ if (status & INTERRUPT_MASK_RX) {
+ dev->stats.rx_interrupts++;
+ result = ps3_vuart_handle_interrupt_rx(dev);
+ if (result)
+ ps3_vuart_disable_interrupt_rx(dev);
+ }
+
+ return 0;
+}
+
+struct vuart_private {
+ unsigned int in_use;
+ unsigned int virq;
+ struct ps3_vuart_port_device *devices[PORT_COUNT];
+ const struct ports_bmp bmp;
+};
+
+/**
+ * ps3_vuart_irq_handler - first stage interrupt handler
+ *
+ * Loops finding any interrupting port and its associated instance data.
+ * Passes control to the second stage port specific interrupt handler. Loops
+ * until all outstanding interrupts are serviced.
+ */
+
+static irqreturn_t ps3_vuart_irq_handler(int irq, void *_private)
+{
+ struct vuart_private *private;
+
+ BUG_ON(!_private);
+ private = (struct vuart_private *)_private;
+
+ while (1) {
+ unsigned int port;
+
+ dump_ports_bmp(&private->bmp);
+
+ port = (BITS_PER_LONG - 1) - __ilog2(private->bmp.status);
+
+ if (port == BITS_PER_LONG)
+ break;
+
+ BUG_ON(port >= PORT_COUNT);
+ BUG_ON(!private->devices[port]);
+
+ ps3_vuart_handle_port_interrupt(private->devices[port]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ps3_vuart_match(struct device *_dev, struct device_driver *_drv)
+{
+ int result;
+ struct ps3_vuart_port_driver *drv = to_ps3_vuart_port_driver(_drv);
+ struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
+
+ result = dev->match_id == drv->match_id;
+
+ dev_info(&dev->core, "%s:%d: dev=%u(%s), drv=%u(%s): %s\n", __func__,
+ __LINE__, dev->match_id, dev->core.bus_id, drv->match_id,
+ drv->core.name, (result ? "match" : "miss"));
+
+ return result;
+}
+
+static struct vuart_private vuart_private;
+
+static int ps3_vuart_probe(struct device *_dev)
+{
+ int result;
+ unsigned long tmp;
+ struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
+ struct ps3_vuart_port_driver *drv =
+ to_ps3_vuart_port_driver(_dev->driver);
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ BUG_ON(!drv);
+
+ result = ps3_vuart_match_id_to_port(dev->match_id, &dev->port_number);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: unknown match_id (%d)\n",
+ __func__, __LINE__, dev->match_id);
+ result = -EINVAL;
+ goto fail_match;
+ }
+
+ if (vuart_private.devices[dev->port_number]) {
+ dev_dbg(&dev->core, "%s:%d: port busy (%d)\n", __func__,
+ __LINE__, dev->port_number);
+ result = -EBUSY;
+ goto fail_match;
+ }
+
+ vuart_private.devices[dev->port_number] = dev;
+
+ INIT_LIST_HEAD(&dev->tx_list.head);
+ spin_lock_init(&dev->tx_list.lock);
+ INIT_LIST_HEAD(&dev->rx_list.head);
+ spin_lock_init(&dev->rx_list.lock);
+
+ vuart_private.in_use++;
+ if (vuart_private.in_use == 1) {
+ result = ps3_alloc_vuart_irq((void*)&vuart_private.bmp.status,
+ &vuart_private.virq);
+
+ if (result) {
+ dev_dbg(&dev->core,
+ "%s:%d: ps3_alloc_vuart_irq failed (%d)\n",
+ __func__, __LINE__, result);
+ result = -EPERM;
+ goto fail_alloc_irq;
+ }
+
+ result = request_irq(vuart_private.virq, ps3_vuart_irq_handler,
+ IRQF_DISABLED, "vuart", &vuart_private);
+
+ if (result) {
+ dev_info(&dev->core, "%s:%d: request_irq failed (%d)\n",
+ __func__, __LINE__, result);
+ goto fail_request_irq;
+ }
+ }
+
+ ps3_vuart_set_interrupt_mask(dev, INTERRUPT_MASK_RX);
+
+ /* clear stale pending interrupts */
+ ps3_vuart_get_interrupt_mask(dev, &tmp);
+
+ ps3_vuart_set_triggers(dev, 1, 1);
+
+ if (drv->probe)
+ result = drv->probe(dev);
+ else {
+ result = 0;
+ dev_info(&dev->core, "%s:%d: no probe method\n", __func__,
+ __LINE__);
+ }
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: drv->probe failed\n",
+ __func__, __LINE__);
+ goto fail_probe;
+ }
+
+ return result;
+
+fail_probe:
+fail_request_irq:
+ vuart_private.in_use--;
+ if (!vuart_private.in_use) {
+ ps3_free_vuart_irq(vuart_private.virq);
+ vuart_private.virq = NO_IRQ;
+ }
+fail_alloc_irq:
+fail_match:
+ dev_dbg(&dev->core, "%s:%d failed\n", __func__, __LINE__);
+ return result;
+}
+
+static int ps3_vuart_remove(struct device *_dev)
+{
+ struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
+ struct ps3_vuart_port_driver *drv =
+ to_ps3_vuart_port_driver(_dev->driver);
+
+ dev_dbg(&dev->core, "%s:%d: %s\n", __func__, __LINE__,
+ dev->core.bus_id);
+
+ BUG_ON(vuart_private.in_use < 1);
+
+ if (drv->remove)
+ drv->remove(dev);
+ else
+ dev_dbg(&dev->core, "%s:%d: %s no remove method\n", __func__,
+ __LINE__, dev->core.bus_id);
+
+ vuart_private.in_use--;
+
+ if (!vuart_private.in_use) {
+ free_irq(vuart_private.virq, &vuart_private);
+ ps3_free_vuart_irq(vuart_private.virq);
+ vuart_private.virq = NO_IRQ;
+ }
+ return 0;
+}
+
+/**
+ * ps3_vuart - The vuart instance.
+ *
+ * The vuart is managed as a bus that port devices connect to.
+ */
+
+struct bus_type ps3_vuart = {
+ .name = "ps3_vuart",
+ .match = ps3_vuart_match,
+ .probe = ps3_vuart_probe,
+ .remove = ps3_vuart_remove,
+};
+
+int __init ps3_vuart_init(void)
+{
+ int result;
+
+ pr_debug("%s:%d:\n", __func__, __LINE__);
+ result = bus_register(&ps3_vuart);
+ BUG_ON(result);
+ return result;
+}
+
+void __exit ps3_vuart_exit(void)
+{
+ pr_debug("%s:%d:\n", __func__, __LINE__);
+ bus_unregister(&ps3_vuart);
+}
+
+core_initcall(ps3_vuart_init);
+module_exit(ps3_vuart_exit);
+
+/**
+ * ps3_vuart_port_release_device - Remove a vuart port device.
+ */
+
+static void ps3_vuart_port_release_device(struct device *_dev)
+{
+ struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
+#if defined(DEBUG)
+ memset(dev, 0xad, sizeof(struct ps3_vuart_port_device));
+#endif
+ kfree(dev);
+}
+
+/**
+ * ps3_vuart_port_device_register - Add a vuart port device.
+ */
+
+int ps3_vuart_port_device_register(struct ps3_vuart_port_device *dev)
+{
+ int result;
+ static unsigned int dev_count = 1;
+
+ dev->core.parent = NULL;
+ dev->core.bus = &ps3_vuart;
+ dev->core.release = ps3_vuart_port_release_device;
+
+ snprintf(dev->core.bus_id, sizeof(dev->core.bus_id), "vuart_%02x",
+ dev_count++);
+
+ dev_dbg(&dev->core, "%s:%d register\n", __func__, __LINE__);
+
+ result = device_register(&dev->core);
+
+ return result;
+}
+
+EXPORT_SYMBOL_GPL(ps3_vuart_port_device_register);
+
+/**
+ * ps3_vuart_port_driver_register - Add a vuart port device driver.
+ */
+
+int ps3_vuart_port_driver_register(struct ps3_vuart_port_driver *drv)
+{
+ int result;
+
+ pr_debug("%s:%d: (%s)\n", __func__, __LINE__, drv->core.name);
+ drv->core.bus = &ps3_vuart;
+ result = driver_register(&drv->core);
+ return result;
+}
+
+EXPORT_SYMBOL_GPL(ps3_vuart_port_driver_register);
+
+/**
+ * ps3_vuart_port_driver_unregister - Remove a vuart port device driver.
+ */
+
+void ps3_vuart_port_driver_unregister(struct ps3_vuart_port_driver *drv)
+{
+ driver_unregister(&drv->core);
+}
+
+EXPORT_SYMBOL_GPL(ps3_vuart_port_driver_unregister);
--- /dev/null
+/*
+ * PS3 virtual uart
+ *
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#if !defined(_PS3_VUART_H)
+#define _PS3_VUART_H
+
+struct ps3_vuart_stats {
+ unsigned long bytes_written;
+ unsigned long bytes_read;
+ unsigned long tx_interrupts;
+ unsigned long rx_interrupts;
+ unsigned long disconnect_interrupts;
+};
+
+/**
+ * struct ps3_vuart_port_device - a device on a vuart port
+ */
+
+struct ps3_vuart_port_device {
+ enum ps3_match_id match_id;
+ struct device core;
+
+ /* private driver variables */
+ unsigned int port_number;
+ unsigned long interrupt_mask;
+ struct {
+ spinlock_t lock;
+ struct list_head head;
+ } tx_list;
+ struct {
+ unsigned long bytes_held;
+ spinlock_t lock;
+ struct list_head head;
+ } rx_list;
+ struct ps3_vuart_stats stats;
+};
+
+/**
+ * struct ps3_vuart_port_driver - a driver for a device on a vuart port
+ */
+
+struct ps3_vuart_port_driver {
+ enum ps3_match_id match_id;
+ struct device_driver core;
+ int (*probe)(struct ps3_vuart_port_device *);
+ int (*remove)(struct ps3_vuart_port_device *);
+ int (*tx_event)(struct ps3_vuart_port_device *dev);
+ int (*rx_event)(struct ps3_vuart_port_device *dev);
+ int (*disconnect_event)(struct ps3_vuart_port_device *dev);
+ /* int (*suspend)(struct ps3_vuart_port_device *, pm_message_t); */
+ /* int (*resume)(struct ps3_vuart_port_device *); */
+};
+
+int ps3_vuart_port_device_register(struct ps3_vuart_port_device *dev);
+int ps3_vuart_port_driver_register(struct ps3_vuart_port_driver *drv);
+void ps3_vuart_port_driver_unregister(struct ps3_vuart_port_driver *drv);
+int ps3_vuart_write(struct ps3_vuart_port_device *dev,
+ const void* buf, unsigned int bytes);
+int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
+ unsigned int bytes);
+static inline struct ps3_vuart_port_driver *to_ps3_vuart_port_driver(
+ struct device_driver *_drv)
+{
+ return container_of(_drv, struct ps3_vuart_port_driver, core);
+}
+static inline struct ps3_vuart_port_device *to_ps3_vuart_port_device(
+ struct device *_dev)
+{
+ return container_of(_dev, struct ps3_vuart_port_device, core);
+}
+
+int ps3_vuart_write(struct ps3_vuart_port_device *dev, const void* buf,
+ unsigned int bytes);
+int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
+ unsigned int bytes);
+
+#endif
To compile this driver as a module, choose M here: the
module will be called rtc-pl031.
-config RTC_DRV_AT91
+config RTC_DRV_AT91RM9200
tristate "AT91RM9200"
depends on RTC_CLASS && ARCH_AT91RM9200
help
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
-obj-$(CONFIG_RTC_DRV_AT91) += rtc-at91.o
+obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o
tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
tm->tm_year = at91_alarm_year - 1900;
+ alrm->enabled = (at91_sys_read(AT91_RTC_IMR) & AT91_RTC_ALARM)
+ ? 1 : 0;
+
pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__,
1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
{
unsigned long imr = at91_sys_read(AT91_RTC_IMR);
- seq_printf(seq, "alarm_IRQ\t: %s\n",
- (imr & AT91_RTC_ALARM) ? "yes" : "no");
seq_printf(seq, "update_IRQ\t: %s\n",
(imr & AT91_RTC_ACKUPD) ? "yes" : "no");
seq_printf(seq, "periodic_IRQ\t: %s\n",
goto err_cdev_del;
}
- dev_info(class_dev->dev, "rtc intf: dev (%d:%d)\n",
+ dev_dbg(class_dev->dev, "rtc intf: dev (%d:%d)\n",
MAJOR(rtc->rtc_dev->devt),
MINOR(rtc->rtc_dev->devt));
struct i2c_client *client;
struct rtc_device *rtc;
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+ dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__);
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
err = -ENODEV;
}
EXPORT_SYMBOL(rtc_tm_to_time);
+
+/* Merge the valid (i.e. non-negative) fields of alarm into the current
+ * time. If the valid alarm fields are earlier than the equivalent
+ * fields in the time, carry one into the least significant invalid
+ * field, so that the alarm expiry is in the future. It assumes that the
+ * least significant invalid field is more significant than the most
+ * significant valid field, and that the seconds field is valid.
+ *
+ * This is used by alarms that take relative (rather than absolute)
+ * times, and/or have a simple binary second counter instead of
+ * day/hour/minute/sec registers.
+ */
+void rtc_merge_alarm(struct rtc_time *now, struct rtc_time *alarm)
+{
+ int *alarmp = &alarm->tm_sec;
+ int *timep = &now->tm_sec;
+ int carry_into, i;
+
+ /* Ignore everything past the 6th element (tm_year). */
+ for (i = 5; i > 0; i--) {
+ if (alarmp[i] < 0)
+ alarmp[i] = timep[i];
+ else
+ break;
+ }
+
+ /* No carry needed if all fields are valid. */
+ if (i == 5)
+ return;
+
+ for (carry_into = i + 1; i >= 0; i--) {
+ if (alarmp[i] < timep[i])
+ break;
+
+ if (alarmp[i] > timep[i])
+ return;
+ }
+
+ switch (carry_into) {
+ case 1:
+ alarm->tm_min++;
+
+ if (alarm->tm_min < 60)
+ return;
+
+ alarm->tm_min = 0;
+ /* fall-through */
+
+ case 2:
+ alarm->tm_hour++;
+
+ if (alarm->tm_hour < 60)
+ return;
+
+ alarm->tm_hour = 0;
+ /* fall-through */
+
+ case 3:
+ alarm->tm_mday++;
+
+ if (alarm->tm_mday <= rtc_days_in_month[alarm->tm_mon])
+ return;
+
+ alarm->tm_mday = 1;
+ /* fall-through */
+
+ case 4:
+ alarm->tm_mon++;
+
+ if (alarm->tm_mon <= 12)
+ return;
+
+ alarm->tm_mon = 1;
+ /* fall-through */
+
+ case 5:
+ alarm->tm_year++;
+ }
+}
+EXPORT_SYMBOL(rtc_merge_alarm);
+
MODULE_LICENSE("GPL");
local_irq_enable();
bcd2tm(&alm->time);
- alm->pending = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG)
+ alm->enabled = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG)
& OMAP_RTC_INTERRUPTS_IT_ALARM);
- alm->enabled = alm->pending && device_may_wakeup(dev);
return 0;
}
xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (xfer != ARRAY_SIZE(msgs)) {
- dev_err(&client->adapter->dev,
+ dev_err(&client->dev,
"%s: could not read register 0x%02X\n",
__FUNCTION__, pattern[i].reg);
if (value > pattern[i].max ||
value < pattern[i].min) {
- dev_dbg(&client->adapter->dev,
+ dev_dbg(&client->dev,
"%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, "
"max=%d, value=%d, raw=0x%02X\n",
__FUNCTION__, i, pattern[i].reg, pattern[i].mask,
int err = 0;
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+ dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__);
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
err = -ENODEV;
seq_printf(seq, "%02d\n", alrm.time.tm_mday);
else
seq_printf(seq, "**\n");
- seq_printf(seq, "alrm_wakeup\t: %s\n",
+ seq_printf(seq, "alarm_IRQ\t: %s\n",
alrm.enabled ? "yes" : "no");
seq_printf(seq, "alrm_pending\t: %s\n",
alrm.pending ? "yes" : "no");
ent->owner = rtc->owner;
ent->data = class_dev;
- dev_info(class_dev->dev, "rtc intf: proc\n");
+ dev_dbg(class_dev->dev, "rtc intf: proc\n");
}
else
rtc_dev = NULL;
struct i2c_client *client;
struct rs5c372 *rs5c372;
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+ dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__);
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
err = -ENODEV;
alm_en = readb(base + S3C2410_RTCALM);
+ alrm->enabled = (alm_en & S3C2410_RTCALM_ALMEN) ? 1 : 0;
+
pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
alm_en,
alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday,
static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
{
- unsigned int rtcalm = readb(s3c_rtc_base + S3C2410_RTCALM);
unsigned int ticnt = readb(s3c_rtc_base + S3C2410_TICNT);
- seq_printf(seq, "alarm_IRQ\t: %s\n",
- (rtcalm & S3C2410_RTCALM_ALMEN) ? "yes" : "no" );
-
seq_printf(seq, "periodic_IRQ\t: %s\n",
(ticnt & S3C2410_TICNT_ENABLE) ? "yes" : "no" );
static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
{
- seq_printf(seq, "trim/divider\t: 0x%08lx\n", RTTR);
- seq_printf(seq, "alarm_IRQ\t: %s\n",
- (RTSR & RTSR_ALE) ? "yes" : "no" );
+ seq_printf(seq, "trim/divider\t: 0x%08x\n", (u32) RTTR);
seq_printf(seq, "update_IRQ\t: %s\n",
(RTSR & RTSR_HZE) ? "yes" : "no");
seq_printf(seq, "periodic_IRQ\t: %s\n",
* SuperH On-Chip RTC Support
*
* Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2006 Jamie Lenehan
*
* Based on the old arch/sh/kernel/cpu/rtc.c by:
*
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <asm/io.h>
+#include <linux/io.h>
+
+#define DRV_NAME "sh-rtc"
+#define DRV_VERSION "0.1.2"
#ifdef CONFIG_CPU_SH3
#define rtc_reg_size sizeof(u16)
#define RTC_REG(r) ((r) * rtc_reg_size)
-#define R64CNT RTC_REG(0)
-#define RSECCNT RTC_REG(1)
-#define RMINCNT RTC_REG(2)
-#define RHRCNT RTC_REG(3)
-#define RWKCNT RTC_REG(4)
-#define RDAYCNT RTC_REG(5)
-#define RMONCNT RTC_REG(6)
-#define RYRCNT RTC_REG(7)
-#define RSECAR RTC_REG(8)
-#define RMINAR RTC_REG(9)
-#define RHRAR RTC_REG(10)
-#define RWKAR RTC_REG(11)
-#define RDAYAR RTC_REG(12)
-#define RMONAR RTC_REG(13)
-#define RCR1 RTC_REG(14)
-#define RCR2 RTC_REG(15)
+#define R64CNT RTC_REG(0)
+
+#define RSECCNT RTC_REG(1) /* RTC sec */
+#define RMINCNT RTC_REG(2) /* RTC min */
+#define RHRCNT RTC_REG(3) /* RTC hour */
+#define RWKCNT RTC_REG(4) /* RTC week */
+#define RDAYCNT RTC_REG(5) /* RTC day */
+#define RMONCNT RTC_REG(6) /* RTC month */
+#define RYRCNT RTC_REG(7) /* RTC year */
+#define RSECAR RTC_REG(8) /* ALARM sec */
+#define RMINAR RTC_REG(9) /* ALARM min */
+#define RHRAR RTC_REG(10) /* ALARM hour */
+#define RWKAR RTC_REG(11) /* ALARM week */
+#define RDAYAR RTC_REG(12) /* ALARM day */
+#define RMONAR RTC_REG(13) /* ALARM month */
+#define RCR1 RTC_REG(14) /* Control */
+#define RCR2 RTC_REG(15) /* Control */
+
+/* ALARM Bits - or with BCD encoded value */
+#define AR_ENB 0x80 /* Enable for alarm cmp */
/* RCR1 Bits */
#define RCR1_CF 0x80 /* Carry Flag */
unsigned int alarm_irq, periodic_irq, carry_irq;
struct rtc_device *rtc_dev;
spinlock_t lock;
+ int rearm_aie;
};
-static irqreturn_t sh_rtc_interrupt(int irq, void *id)
+static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id)
{
- struct platform_device *pdev = id;
+ struct platform_device *pdev = to_platform_device(dev_id);
struct sh_rtc *rtc = platform_get_drvdata(pdev);
unsigned int tmp, events = 0;
spin_lock(&rtc->lock);
tmp = readb(rtc->regbase + RCR1);
+ tmp &= ~RCR1_CF;
- if (tmp & RCR1_AF)
- events |= RTC_AF | RTC_IRQF;
-
- tmp &= ~(RCR1_CF | RCR1_AF);
+ if (rtc->rearm_aie) {
+ if (tmp & RCR1_AF)
+ tmp &= ~RCR1_AF; /* try to clear AF again */
+ else {
+ tmp |= RCR1_AIE; /* AF has cleared, rearm IRQ */
+ rtc->rearm_aie = 0;
+ }
+ }
writeb(tmp, rtc->regbase + RCR1);
return IRQ_HANDLED;
}
-static irqreturn_t sh_rtc_periodic(int irq, void *id)
+static irqreturn_t sh_rtc_alarm(int irq, void *dev_id)
+{
+ struct platform_device *pdev = to_platform_device(dev_id);
+ struct sh_rtc *rtc = platform_get_drvdata(pdev);
+ unsigned int tmp, events = 0;
+
+ spin_lock(&rtc->lock);
+
+ tmp = readb(rtc->regbase + RCR1);
+
+ /*
+ * If AF is set then the alarm has triggered. If we clear AF while
+ * the alarm time still matches the RTC time then AF will
+ * immediately be set again, and if AIE is enabled then the alarm
+ * interrupt will immediately be retrigger. So we clear AIE here
+ * and use rtc->rearm_aie so that the carry interrupt will keep
+ * trying to clear AF and once it stays cleared it'll re-enable
+ * AIE.
+ */
+ if (tmp & RCR1_AF) {
+ events |= RTC_AF | RTC_IRQF;
+
+ tmp &= ~(RCR1_AF|RCR1_AIE);
+
+ writeb(tmp, rtc->regbase + RCR1);
+
+ rtc->rearm_aie = 1;
+
+ rtc_update_irq(&rtc->rtc_dev->class_dev, 1, events);
+ }
+
+ spin_unlock(&rtc->lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sh_rtc_periodic(int irq, void *dev_id)
{
- struct sh_rtc *rtc = dev_get_drvdata(id);
+ struct platform_device *pdev = to_platform_device(dev_id);
+ struct sh_rtc *rtc = platform_get_drvdata(pdev);
spin_lock(&rtc->lock);
tmp = readb(rtc->regbase + RCR1);
- if (enable)
- tmp |= RCR1_AIE;
- else
+ if (!enable) {
tmp &= ~RCR1_AIE;
+ rtc->rearm_aie = 0;
+ } else if (rtc->rearm_aie == 0)
+ tmp |= RCR1_AIE;
writeb(tmp, rtc->regbase + RCR1);
goto err_bad_carry;
}
- ret = request_irq(rtc->alarm_irq, sh_rtc_interrupt, IRQF_DISABLED,
+ ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, IRQF_DISABLED,
"sh-rtc alarm", dev);
if (unlikely(ret)) {
dev_err(dev, "request alarm IRQ failed with %d, IRQ %d\n",
struct sh_rtc *rtc = dev_get_drvdata(dev);
sh_rtc_setpie(dev, 0);
+ sh_rtc_setaie(dev, 0);
free_irq(rtc->periodic_irq, dev);
free_irq(rtc->carry_irq, dev);
tm->tm_hour = BCD2BIN(readb(rtc->regbase + RHRCNT));
tm->tm_wday = BCD2BIN(readb(rtc->regbase + RWKCNT));
tm->tm_mday = BCD2BIN(readb(rtc->regbase + RDAYCNT));
- tm->tm_mon = BCD2BIN(readb(rtc->regbase + RMONCNT));
+ tm->tm_mon = BCD2BIN(readb(rtc->regbase + RMONCNT)) - 1;
#if defined(CONFIG_CPU_SH4)
yr = readw(rtc->regbase + RYRCNT);
"mday=%d, mon=%d, year=%d, wday=%d\n",
__FUNCTION__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+ tm->tm_mday, tm->tm_mon + 1, tm->tm_year, tm->tm_wday);
if (rtc_valid_tm(tm) < 0)
dev_err(dev, "invalid date\n");
writeb(BIN2BCD(tm->tm_hour), rtc->regbase + RHRCNT);
writeb(BIN2BCD(tm->tm_wday), rtc->regbase + RWKCNT);
writeb(BIN2BCD(tm->tm_mday), rtc->regbase + RDAYCNT);
- writeb(BIN2BCD(tm->tm_mon), rtc->regbase + RMONCNT);
+ writeb(BIN2BCD(tm->tm_mon + 1), rtc->regbase + RMONCNT);
#ifdef CONFIG_CPU_SH3
year = tm->tm_year % 100;
return 0;
}
+static inline int sh_rtc_read_alarm_value(struct sh_rtc *rtc, int reg_off)
+{
+ unsigned int byte;
+ int value = 0xff; /* return 0xff for ignored values */
+
+ byte = readb(rtc->regbase + reg_off);
+ if (byte & AR_ENB) {
+ byte &= ~AR_ENB; /* strip the enable bit */
+ value = BCD2BIN(byte);
+ }
+
+ return value;
+}
+
+static int sh_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_rtc *rtc = platform_get_drvdata(pdev);
+ struct rtc_time* tm = &wkalrm->time;
+
+ spin_lock_irq(&rtc->lock);
+
+ tm->tm_sec = sh_rtc_read_alarm_value(rtc, RSECAR);
+ tm->tm_min = sh_rtc_read_alarm_value(rtc, RMINAR);
+ tm->tm_hour = sh_rtc_read_alarm_value(rtc, RHRAR);
+ tm->tm_wday = sh_rtc_read_alarm_value(rtc, RWKAR);
+ tm->tm_mday = sh_rtc_read_alarm_value(rtc, RDAYAR);
+ tm->tm_mon = sh_rtc_read_alarm_value(rtc, RMONAR);
+ if (tm->tm_mon > 0)
+ tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+ tm->tm_year = 0xffff;
+
+ spin_unlock_irq(&rtc->lock);
+
+ return 0;
+}
+
+static inline void sh_rtc_write_alarm_value(struct sh_rtc *rtc,
+ int value, int reg_off)
+{
+ /* < 0 for a value that is ignored */
+ if (value < 0)
+ writeb(0, rtc->regbase + reg_off);
+ else
+ writeb(BIN2BCD(value) | AR_ENB, rtc->regbase + reg_off);
+}
+
+static int sh_rtc_check_alarm(struct rtc_time* tm)
+{
+ /*
+ * The original rtc says anything > 0xc0 is "don't care" or "match
+ * all" - most users use 0xff but rtc-dev uses -1 for the same thing.
+ * The original rtc doesn't support years - some things use -1 and
+ * some 0xffff. We use -1 to make out tests easier.
+ */
+ if (tm->tm_year == 0xffff)
+ tm->tm_year = -1;
+ if (tm->tm_mon >= 0xff)
+ tm->tm_mon = -1;
+ if (tm->tm_mday >= 0xff)
+ tm->tm_mday = -1;
+ if (tm->tm_wday >= 0xff)
+ tm->tm_wday = -1;
+ if (tm->tm_hour >= 0xff)
+ tm->tm_hour = -1;
+ if (tm->tm_min >= 0xff)
+ tm->tm_min = -1;
+ if (tm->tm_sec >= 0xff)
+ tm->tm_sec = -1;
+
+ if (tm->tm_year > 9999 ||
+ tm->tm_mon >= 12 ||
+ tm->tm_mday == 0 || tm->tm_mday >= 32 ||
+ tm->tm_wday >= 7 ||
+ tm->tm_hour >= 24 ||
+ tm->tm_min >= 60 ||
+ tm->tm_sec >= 60)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int sh_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_rtc *rtc = platform_get_drvdata(pdev);
+ unsigned int rcr1;
+ struct rtc_time *tm = &wkalrm->time;
+ int mon, err;
+
+ err = sh_rtc_check_alarm(tm);
+ if (unlikely(err < 0))
+ return err;
+
+ spin_lock_irq(&rtc->lock);
+
+ /* disable alarm interrupt and clear flag */
+ rcr1 = readb(rtc->regbase + RCR1);
+ rcr1 &= ~RCR1_AF;
+ writeb(rcr1 & ~RCR1_AIE, rtc->regbase + RCR1);
+
+ rtc->rearm_aie = 0;
+
+ /* set alarm time */
+ sh_rtc_write_alarm_value(rtc, tm->tm_sec, RSECAR);
+ sh_rtc_write_alarm_value(rtc, tm->tm_min, RMINAR);
+ sh_rtc_write_alarm_value(rtc, tm->tm_hour, RHRAR);
+ sh_rtc_write_alarm_value(rtc, tm->tm_wday, RWKAR);
+ sh_rtc_write_alarm_value(rtc, tm->tm_mday, RDAYAR);
+ mon = tm->tm_mon;
+ if (mon >= 0)
+ mon += 1;
+ sh_rtc_write_alarm_value(rtc, mon, RMONAR);
+
+ /* Restore interrupt activation status */
+ writeb(rcr1, rtc->regbase + RCR1);
+
+ spin_unlock_irq(&rtc->lock);
+
+ return 0;
+}
+
static struct rtc_class_ops sh_rtc_ops = {
.open = sh_rtc_open,
.release = sh_rtc_release,
.ioctl = sh_rtc_ioctl,
.read_time = sh_rtc_read_time,
.set_time = sh_rtc_set_time,
+ .read_alarm = sh_rtc_read_alarm,
+ .set_alarm = sh_rtc_set_alarm,
.proc = sh_rtc_proc,
};
}
static struct platform_driver sh_rtc_platform_driver = {
.driver = {
- .name = "sh-rtc",
+ .name = DRV_NAME,
.owner = THIS_MODULE,
},
.probe = sh_rtc_probe,
module_exit(sh_rtc_exit);
MODULE_DESCRIPTION("SuperH on-chip RTC driver");
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, Jamie Lenehan <lenehan@twibble.org>");
MODULE_LICENSE("GPL");
{
int err;
- dev_info(class_dev->dev, "rtc intf: sysfs\n");
+ dev_dbg(class_dev->dev, "rtc intf: sysfs\n");
err = sysfs_create_group(&class_dev->kobj, &rtc_attr_group);
if (err)
};
if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
- dev_err(&client->adapter->dev,
+ dev_err(&client->dev,
"%s: could not read register %x\n",
__FUNCTION__, probe_zero_pattern[i]);
}
if ((buf & probe_zero_pattern[i+1]) != 0) {
- dev_err(&client->adapter->dev,
+ dev_err(&client->dev,
"%s: register=%02x, zero pattern=%d, value=%x\n",
__FUNCTION__, probe_zero_pattern[i], i, buf);
};
if ((xfer = i2c_transfer(client->adapter, msgs, 2)) != 2) {
- dev_err(&client->adapter->dev,
+ dev_err(&client->dev,
"%s: could not read register %x\n",
__FUNCTION__, probe_limits_pattern[i].reg);
if (value > probe_limits_pattern[i].max ||
value < probe_limits_pattern[i].min) {
- dev_dbg(&client->adapter->dev,
+ dev_dbg(&client->dev,
"%s: register=%x, lim pattern=%d, value=%d\n",
__FUNCTION__, probe_limits_pattern[i].reg,
i, value);
struct i2c_client *client;
struct rtc_device *rtc;
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+ dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__);
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
err = -ENODEV;
}
} else { /* error */
memcpy(&cqr->irb, irb, sizeof (struct irb));
-#ifdef ERP_DEBUG
- /* dump sense data */
- dasd_log_sense(cqr, irb);
-#endif
+ if (device->features & DASD_FEATURE_ERPLOG) {
+ /* dump sense data */
+ dasd_log_sense(cqr, irb);
+ }
switch (era) {
case dasd_era_fatal:
cqr->status = DASD_CQR_FAILED;
struct dasd_ccw_req *erp = NULL;
struct dasd_device *device = cqr->device;
__u32 cpa = cqr->irb.scsw.cpa;
+ struct dasd_ccw_req *temp_erp = NULL;
-#ifdef ERP_DEBUG
- /* print current erp_chain */
- DEV_MESSAGE(KERN_ERR, device, "%s",
- "ERP chain at BEGINNING of ERP-ACTION");
- {
- struct dasd_ccw_req *temp_erp = NULL;
-
+ if (device->features & DASD_FEATURE_ERPLOG) {
+ /* print current erp_chain */
+ DEV_MESSAGE(KERN_ERR, device, "%s",
+ "ERP chain at BEGINNING of ERP-ACTION");
for (temp_erp = cqr;
temp_erp != NULL; temp_erp = temp_erp->refers) {
temp_erp->refers);
}
}
-#endif /* ERP_DEBUG */
/* double-check if current erp/cqr was successfull */
if ((cqr->irb.scsw.cstat == 0x00) &&
erp = dasd_3990_erp_handle_match_erp(cqr, erp);
}
-#ifdef ERP_DEBUG
- /* print current erp_chain */
- DEV_MESSAGE(KERN_ERR, device, "%s", "ERP chain at END of ERP-ACTION");
- {
- struct dasd_ccw_req *temp_erp = NULL;
+ if (device->features & DASD_FEATURE_ERPLOG) {
+ /* print current erp_chain */
+ DEV_MESSAGE(KERN_ERR, device, "%s",
+ "ERP chain at END of ERP-ACTION");
for (temp_erp = erp;
temp_erp != NULL; temp_erp = temp_erp->refers) {
temp_erp->refers);
}
}
-#endif /* ERP_DEBUG */
if (erp->status == DASD_CQR_FAILED)
dasd_log_ccw(erp, 1, cpa);
features |= DASD_FEATURE_READONLY;
else if (len == 4 && !strncmp(str, "diag", 4))
features |= DASD_FEATURE_USEDIAG;
+ else if (len == 6 && !strncmp(str, "erplog", 6))
+ features |= DASD_FEATURE_ERPLOG;
else {
MESSAGE(KERN_WARNING,
"unsupported feature: %*s, "
}
static DEVICE_ATTR(readonly, 0644, dasd_ro_show, dasd_ro_store);
+/*
+ * erplog controls the logging of ERP related data
+ * (e.g. failing channel programs).
+ */
+static ssize_t
+dasd_erplog_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct dasd_devmap *devmap;
+ int erplog;
+
+ devmap = dasd_find_busid(dev->bus_id);
+ if (!IS_ERR(devmap))
+ erplog = (devmap->features & DASD_FEATURE_ERPLOG) != 0;
+ else
+ erplog = (DASD_FEATURE_DEFAULT & DASD_FEATURE_ERPLOG) != 0;
+ return snprintf(buf, PAGE_SIZE, erplog ? "1\n" : "0\n");
+}
+
+static ssize_t
+dasd_erplog_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dasd_devmap *devmap;
+ int val;
+ char *endp;
+
+ devmap = dasd_devmap_from_cdev(to_ccwdev(dev));
+ if (IS_ERR(devmap))
+ return PTR_ERR(devmap);
+
+ val = simple_strtoul(buf, &endp, 0);
+ if (((endp + 1) < (buf + count)) || (val > 1))
+ return -EINVAL;
+
+ spin_lock(&dasd_devmap_lock);
+ if (val)
+ devmap->features |= DASD_FEATURE_ERPLOG;
+ else
+ devmap->features &= ~DASD_FEATURE_ERPLOG;
+ if (devmap->device)
+ devmap->device->features = devmap->features;
+ spin_unlock(&dasd_devmap_lock);
+ return count;
+}
+
+static DEVICE_ATTR(erplog, 0644, dasd_erplog_show, dasd_erplog_store);
/*
* use_diag controls whether the driver should use diag rather than ssch
&dev_attr_uid.attr,
&dev_attr_use_diag.attr,
&dev_attr_eer_enabled.attr,
+ &dev_attr_erplog.attr,
NULL,
};
#ifdef __KERNEL__
-/* erp debugging in dasd.c and dasd_3990_erp.c */
-#define ERP_DEBUG
-
-
/* we keep old device allocation scheme; IOW, minors are still in 0..255 */
#define DASD_PER_MAJOR (1U << (MINORBITS - DASD_PARTN_BITS))
#define DASD_PARTN_MASK ((1 << DASD_PARTN_BITS) - 1)
int rval;
lock_kernel();
- rval = dasd_ioctl(filp->f_dentry->d_inode, filp, cmd, arg);
+ rval = dasd_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg);
unlock_kernel();
return (rval == -EINVAL) ? -ENOIOCTLCMD : rval;
raw->cdev = cdev;
raw->inbuf = (char *) raw + sizeof(struct raw3215_info);
memset(raw, 0, sizeof(struct raw3215_info));
- raw->buffer = (char *) kmalloc(RAW3215_BUFFER_SIZE,
+ raw->buffer = kmalloc(RAW3215_BUFFER_SIZE,
GFP_KERNEL|GFP_DMA);
if (raw->buffer == NULL) {
spin_lock(&raw3215_device_lock);
#ifdef CONFIG_MAGIC_SYSRQ
static int ctrlchar_sysrq_key;
+static struct tty_struct *sysrq_tty;
static void
-ctrlchar_handle_sysrq(void *tty)
+ctrlchar_handle_sysrq(struct work_struct *work)
{
- handle_sysrq(ctrlchar_sysrq_key, (struct tty_struct *) tty);
+ handle_sysrq(ctrlchar_sysrq_key, sysrq_tty);
}
-static DECLARE_WORK(ctrlchar_work, ctrlchar_handle_sysrq, NULL);
+static DECLARE_WORK(ctrlchar_work, ctrlchar_handle_sysrq);
#endif
/* racy */
if (len == 3 && buf[1] == '-') {
ctrlchar_sysrq_key = buf[2];
- ctrlchar_work.data = tty;
+ sysrq_tty = tty;
schedule_work(&ctrlchar_work);
return CTRLCHAR_SYSRQ;
}
struct idal_buffer *ib;
int minor, rc;
- if (imajor(filp->f_dentry->d_inode) != IBM_FS3270_MAJOR)
+ if (imajor(filp->f_path.dentry->d_inode) != IBM_FS3270_MAJOR)
return -ENODEV;
- minor = iminor(filp->f_dentry->d_inode);
+ minor = iminor(filp->f_path.dentry->d_inode);
/* Check for minor 0 multiplexer. */
if (minor == 0) {
- if (!current->signal->tty)
+ struct tty_struct *tty;
+ mutex_lock(&tty_mutex);
+ tty = get_current_tty();
+ if (!tty || tty->driver->major != IBM_TTY3270_MAJOR) {
+ mutex_unlock(&tty_mutex);
return -ENODEV;
- if (current->signal->tty->driver->major != IBM_TTY3270_MAJOR)
- return -ENODEV;
- minor = current->signal->tty->index + RAW3270_FIRSTMINOR;
+ }
+ minor = tty->index + RAW3270_FIRSTMINOR;
+ mutex_unlock(&tty_mutex);
}
/* Check if some other program is already using fullscreen mode. */
fp = (struct fs3270 *) raw3270_find_view(&fs3270_fn, minor);
if (!(key_map = kbd->key_maps[tmp.kb_table])) {
int j;
- key_map = (ushort *) kmalloc(sizeof(plain_map),
+ key_map = kmalloc(sizeof(plain_map),
GFP_KERNEL);
if (!key_map)
return -ENOMEM;
struct cpi_sccb *sccb;
struct cpi_evbuf *evb;
- req = (struct sclp_req *) kmalloc(sizeof(struct sclp_req), GFP_KERNEL);
+ req = kmalloc(sizeof(struct sclp_req), GFP_KERNEL);
if (req == NULL)
return ERR_PTR(-ENOMEM);
sccb = (struct cpi_sccb *) __get_free_page(GFP_KERNEL | GFP_DMA);
struct tty_driver *sclp_tty_driver;
-extern struct termios tty_std_termios;
-
static struct sclp_ioctls sclp_ioctls;
static struct sclp_ioctls sclp_ioctls_init =
{
/* Block Frontend Data */
struct tape_blk_data
{
+ struct tape_device * device;
/* Block device request queue. */
request_queue_t * request_queue;
spinlock_t request_queue_lock;
#endif
/* Function to start or stop the next request later. */
- struct work_struct tape_dnr;
+ struct delayed_work tape_dnr;
};
/* Externals from tape_core.c */
return rc;
}
+struct tape_34xx_work {
+ struct tape_device *device;
+ enum tape_op op;
+ struct work_struct work;
+};
+
/*
* These functions are currently used only to schedule a medium_sense for
* later execution. This is because we get an interrupt whenever a medium
* interrupt handler.
*/
static void
-tape_34xx_work_handler(void *data)
+tape_34xx_work_handler(struct work_struct *work)
{
- struct {
- struct tape_device *device;
- enum tape_op op;
- struct work_struct work;
- } *p = data;
+ struct tape_34xx_work *p =
+ container_of(work, struct tape_34xx_work, work);
switch(p->op) {
case TO_MSEN:
static int
tape_34xx_schedule_work(struct tape_device *device, enum tape_op op)
{
- struct {
- struct tape_device *device;
- enum tape_op op;
- struct work_struct work;
- } *p;
+ struct tape_34xx_work *p;
if ((p = kmalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
return -ENOMEM;
memset(p, 0, sizeof(*p));
- INIT_WORK(&p->work, tape_34xx_work_handler, p);
+ INIT_WORK(&p->work, tape_34xx_work_handler);
p->device = tape_get_device_reference(device);
p->op = op;
};
static void
-tape_3590_work_handler(void *data)
+tape_3590_work_handler(struct work_struct *work)
{
- struct work_handler_data *p = data;
+ struct work_handler_data *p =
+ container_of(work, struct work_handler_data, work);
switch (p->op) {
case TO_MSEN:
if ((p = kzalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
return -ENOMEM;
- INIT_WORK(&p->work, tape_3590_work_handler, p);
+ INIT_WORK(&p->work, tape_3590_work_handler);
p->device = tape_get_device_reference(device);
p->op = op;
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/buffer_head.h>
+#include <linux/kernel.h>
#include <asm/debug.h>
* queue.
*/
static void
-tapeblock_requeue(void *data) {
+tapeblock_requeue(struct work_struct *work) {
+ struct tape_blk_data * blkdat;
struct tape_device * device;
request_queue_t * queue;
int nr_queued;
struct list_head * l;
int rc;
- device = (struct tape_device *) data;
+ blkdat = container_of(work, struct tape_blk_data, requeue_task);
+ device = blkdat->device;
if (!device)
return;
int rc;
blkdat = &device->blk_data;
+ blkdat->device = device;
spin_lock_init(&blkdat->request_queue_lock);
atomic_set(&blkdat->requeue_scheduled, 0);
add_disk(disk);
- INIT_WORK(&blkdat->requeue_task, tapeblock_requeue,
- tape_get_device_reference(device));
+ tape_get_device_reference(device);
+ INIT_WORK(&blkdat->requeue_task, tapeblock_requeue);
return 0;
tapeblock_cleanup_device(struct tape_device *device)
{
flush_scheduled_work();
- device->blk_data.requeue_task.data = tape_put_device(device);
+ tape_put_device(device);
if (!device->blk_data.disk) {
PRINT_ERR("(%s): No gendisk to clean up!\n",
int minor, rc;
DBF_EVENT(6, "TCHAR:open: %i:%i\n",
- imajor(filp->f_dentry->d_inode),
- iminor(filp->f_dentry->d_inode));
+ imajor(filp->f_path.dentry->d_inode),
+ iminor(filp->f_path.dentry->d_inode));
- if (imajor(filp->f_dentry->d_inode) != tapechar_major)
+ if (imajor(filp->f_path.dentry->d_inode) != tapechar_major)
return -ENODEV;
- minor = iminor(filp->f_dentry->d_inode);
+ minor = iminor(filp->f_path.dentry->d_inode);
device = tape_get_device(minor / TAPE_MINORS_PER_DEV);
if (IS_ERR(device)) {
DBF_EVENT(3, "TCHAR:open: tape_get_device() failed\n");
#define PRINTK_HEADER "TAPE_CORE: "
static void __tape_do_irq (struct ccw_device *, unsigned long, struct irb *);
-static void tape_delayed_next_request(void * data);
+static void tape_delayed_next_request(struct work_struct *);
/*
* One list to contain all tape devices of all disciplines, so
return 0;
case -EBUSY:
request->status = TAPE_REQUEST_CANCEL;
- schedule_work(&device->tape_dnr);
+ schedule_delayed_work(&device->tape_dnr, 0);
return 0;
case -ENODEV:
DBF_EXCEPTION(2, "device gone, retry\n");
*device->modeset_byte = 0;
device->first_minor = -1;
atomic_set(&device->ref_count, 1);
- INIT_WORK(&device->tape_dnr, tape_delayed_next_request, device);
+ INIT_DELAYED_WORK(&device->tape_dnr, tape_delayed_next_request);
return device;
}
} else if (rc == -EBUSY) {
/* The common I/O subsystem is currently busy. Retry later. */
request->status = TAPE_REQUEST_QUEUED;
- schedule_work(&device->tape_dnr);
+ schedule_delayed_work(&device->tape_dnr, 0);
rc = 0;
} else {
/* Start failed. Remove request and indicate failure. */
}
static void
-tape_delayed_next_request(void *data)
+tape_delayed_next_request(struct work_struct *work)
{
- struct tape_device * device;
+ struct tape_device *device =
+ container_of(work, struct tape_device, tape_dnr.work);
- device = (struct tape_device *) data;
DBF_LH(6, "tape_delayed_next_request(%p)\n", device);
spin_lock_irq(get_ccwdev_lock(device->cdev));
__tape_start_next_request(device);
* Check for visible/invisible input switches
*/
static void
-tty3270_set_termios(struct tty_struct *tty, struct termios *old)
+tty3270_set_termios(struct tty_struct *tty, struct ktermios *old)
{
struct tty3270 *tp;
int new;
page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!page)
return -ENOMEM;
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
ret = chsc_get_sch_desc_irq(sch, page);
if (ret) {
static int cio_chsc_err_msg;
cio_chsc_err_msg = 1;
}
}
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
free_page((unsigned long)page);
if (!ret) {
int j, chpid, mask;
if (j >= 8)
return 0;
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
stsch(sch->schid, &schib);
if (!schib.pmcw.dnv)
else if (sch->lpm == mask)
goto out_unreg;
out_unlock:
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
return 0;
out_unreg:
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
sch->lpm = 0;
if (css_enqueue_subchannel_slow(sch->schid)) {
css_clear_subchannel_slow_list();
/* Check if a subchannel is newly available. */
return s390_process_res_acc_new_sch(schid);
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
chp_mask = s390_process_res_acc_sch(res_data, sch);
if (chp_mask == 0) {
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
put_device(&sch->dev);
return 0;
}
else if (sch->driver && sch->driver->verify)
sch->driver->verify(&sch->dev);
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
put_device(&sch->dev);
return 0;
}
if (!sch)
/* Check if the subchannel is now available. */
return __chp_add_new_sch(schid);
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
for (i=0; i<8; i++) {
mask = 0x80 >> i;
if ((sch->schib.pmcw.pim & mask) &&
(sch->schib.pmcw.chpid[i] == chp->id)) {
if (stsch(sch->schid, &sch->schib) != 0) {
/* Endgame. */
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
return -ENXIO;
}
break;
}
}
if (i==8) {
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
return 0;
}
sch->lpm = ((sch->schib.pmcw.pim &
if (sch->driver && sch->driver->verify)
sch->driver->verify(&sch->dev);
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
put_device(&sch->dev);
return 0;
}
if (!sch->ssd_info.valid)
return;
- spin_lock_irqsave(&sch->lock, flags);
+ spin_lock_irqsave(sch->lock, flags);
old_lpm = sch->lpm;
for (chp = 0; chp < 8; chp++) {
if (sch->ssd_info.chpid[chp] != chpid)
sch->driver->verify(&sch->dev);
break;
}
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
}
static int
return 1;
local_bh_disable();
irq_enter ();
- spin_lock(&sch->lock);
+ spin_lock(sch->lock);
memcpy (&sch->schib.scsw, &irb->scsw, sizeof (struct scsw));
if (sch->driver && sch->driver->irq)
sch->driver->irq(&sch->dev);
- spin_unlock(&sch->lock);
+ spin_unlock(sch->lock);
irq_exit ();
_local_bh_enable();
return 1;
CIO_TRACE_EVENT (2, "ensch");
CIO_TRACE_EVENT (2, sch->dev.bus_id);
+ if (sch_is_pseudo_sch(sch))
+ return -EINVAL;
ccode = stsch (sch->schid, &sch->schib);
if (ccode)
return -ENODEV;
CIO_TRACE_EVENT (2, "dissch");
CIO_TRACE_EVENT (2, sch->dev.bus_id);
+ if (sch_is_pseudo_sch(sch))
+ return 0;
ccode = stsch (sch->schid, &sch->schib);
if (ccode == 3) /* Not operational. */
return -ENODEV;
return ret;
}
+int cio_create_sch_lock(struct subchannel *sch)
+{
+ sch->lock = kmalloc(sizeof(spinlock_t), GFP_KERNEL);
+ if (!sch->lock)
+ return -ENOMEM;
+ spin_lock_init(sch->lock);
+ return 0;
+}
+
/*
* cio_validate_subchannel()
*
{
char dbf_txt[15];
int ccode;
+ int err;
sprintf (dbf_txt, "valsch%x", schid.sch_no);
CIO_TRACE_EVENT (4, dbf_txt);
/* Nuke all fields. */
memset(sch, 0, sizeof(struct subchannel));
- spin_lock_init(&sch->lock);
+ sch->schid = schid;
+ if (cio_is_console(schid)) {
+ sch->lock = cio_get_console_lock();
+ } else {
+ err = cio_create_sch_lock(sch);
+ if (err)
+ goto out;
+ }
mutex_init(&sch->reg_mutex);
-
/* Set a name for the subchannel */
snprintf (sch->dev.bus_id, BUS_ID_SIZE, "0.%x.%04x", schid.ssid,
schid.sch_no);
* is not valid.
*/
ccode = stsch_err (schid, &sch->schib);
- if (ccode)
- return (ccode == 3) ? -ENXIO : ccode;
-
- sch->schid = schid;
+ if (ccode) {
+ err = (ccode == 3) ? -ENXIO : ccode;
+ goto out;
+ }
/* Copy subchannel type from path management control word. */
sch->st = sch->schib.pmcw.st;
"non-I/O subchannel type %04X\n",
sch->schid.ssid, sch->schid.sch_no, sch->st);
/* We stop here for non-io subchannels. */
- return sch->st;
+ err = sch->st;
+ goto out;
}
/* Initialization for io subchannels. */
- if (!sch->schib.pmcw.dnv)
+ if (!sch->schib.pmcw.dnv) {
/* io subchannel but device number is invalid. */
- return -ENODEV;
-
+ err = -ENODEV;
+ goto out;
+ }
/* Devno is valid. */
if (is_blacklisted (sch->schid.ssid, sch->schib.pmcw.dev)) {
/*
CIO_MSG_EVENT(0, "Blacklisted device detected "
"at devno %04X, subchannel set %x\n",
sch->schib.pmcw.dev, sch->schid.ssid);
- return -ENODEV;
+ err = -ENODEV;
+ goto out;
}
sch->opm = 0xff;
if (!cio_is_console(sch->schid))
if ((sch->lpm & (sch->lpm - 1)) != 0)
sch->schib.pmcw.mp = 1; /* multipath mode */
return 0;
+out:
+ if (!cio_is_console(schid))
+ kfree(sch->lock);
+ sch->lock = NULL;
+ return err;
}
/*
}
sch = (struct subchannel *)(unsigned long)tpi_info->intparm;
if (sch)
- spin_lock(&sch->lock);
+ spin_lock(sch->lock);
/* Store interrupt response block to lowcore. */
if (tsch (tpi_info->schid, irb) == 0 && sch) {
/* Keep subchannel information word up to date. */
sch->driver->irq(&sch->dev);
}
if (sch)
- spin_unlock(&sch->lock);
+ spin_unlock(sch->lock);
/*
* Are more interrupts pending?
* If so, the tpi instruction will update the lowcore
__ctl_load (cr6, 6, 6);
do {
- spin_unlock(&console_subchannel.lock);
+ spin_unlock(console_subchannel.lock);
if (!cio_tpi())
cpu_relax();
- spin_lock(&console_subchannel.lock);
+ spin_lock(console_subchannel.lock);
} while (console_subchannel.schib.scsw.actl != 0);
/*
* restore previous isc value
/* subchannel data structure used by I/O subroutines */
struct subchannel {
struct subchannel_id schid;
- spinlock_t lock; /* subchannel lock */
+ spinlock_t *lock; /* subchannel lock */
struct mutex reg_mutex;
enum {
SUBCHANNEL_TYPE_IO = 0,
extern int cio_get_options (struct subchannel *);
extern int cio_modify (struct subchannel *);
+int cio_create_sch_lock(struct subchannel *);
+
/* Use with care. */
#ifdef CONFIG_CCW_CONSOLE
extern struct subchannel *cio_probe_console(void);
extern void cio_release_console(void);
extern int cio_is_console(struct subchannel_id);
extern struct subchannel *cio_get_console_subchannel(void);
+extern spinlock_t * cio_get_console_lock(void);
#else
#define cio_is_console(schid) 0
#define cio_get_console_subchannel() NULL
+#define cio_get_console_lock() NULL;
#endif
extern int cio_show_msg;
/* Reset intparm to zeroes. */
sch->schib.pmcw.intparm = 0;
cio_modify(sch);
+ kfree(sch->lock);
kfree(sch);
}
-
}
static void
struct subchannel *sch;
sch = to_subchannel(dev);
- if (!cio_is_console(sch->schid))
+ if (!cio_is_console(sch->schid)) {
+ kfree(sch->lock);
kfree(sch);
+ }
}
extern int css_get_ssd_info(struct subchannel *sch);
sch->dev.parent = &css[0]->device;
sch->dev.bus = &css_bus_type;
sch->dev.release = &css_subchannel_release;
-
+ sch->dev.groups = subch_attr_groups;
+
/* make it known to the system */
ret = css_sch_device_register(sch);
- if (ret)
+ if (ret) {
printk (KERN_WARNING "%s: could not register %s\n",
__func__, sch->dev.bus_id);
- else
- css_get_ssd_info(sch);
+ return ret;
+ }
+ css_get_ssd_info(sch);
return ret;
}
unsigned long flags;
enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE } action;
- spin_lock_irqsave(&sch->lock, flags);
+ spin_lock_irqsave(sch->lock, flags);
disc = device_is_disconnected(sch);
if (disc && slow) {
/* Disconnected devices are evaluated directly only.*/
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
return 0;
}
/* No interrupt after machine check - kill pending timers. */
device_kill_pending_timer(sch);
if (!disc && !slow) {
/* Non-disconnected devices are evaluated on the slow path. */
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
return -EAGAIN;
}
event = css_get_subchannel_status(sch);
/* Ask driver what to do with device. */
action = UNREGISTER;
if (sch->driver && sch->driver->notify) {
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
ret = sch->driver->notify(&sch->dev, event);
- spin_lock_irqsave(&sch->lock, flags);
+ spin_lock_irqsave(sch->lock, flags);
if (ret)
action = NONE;
}
case UNREGISTER:
case UNREGISTER_PROBE:
/* Unregister device (will use subchannel lock). */
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
css_sch_device_unregister(sch);
- spin_lock_irqsave(&sch->lock, flags);
+ spin_lock_irqsave(sch->lock, flags);
/* Reset intparm to zeroes. */
sch->schib.pmcw.intparm = 0;
default:
break;
}
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
/* Probe if necessary. */
if (action == UNREGISTER_PROBE)
ret = css_probe_device(sch->schid);
static DEVICE_ATTR(cm_enable, 0644, css_cm_enable_show, css_cm_enable_store);
-static inline void __init
-setup_css(int nr)
+static inline int __init setup_css(int nr)
{
u32 tod_high;
+ int ret;
memset(css[nr], 0, sizeof(struct channel_subsystem));
+ css[nr]->pseudo_subchannel =
+ kzalloc(sizeof(*css[nr]->pseudo_subchannel), GFP_KERNEL);
+ if (!css[nr]->pseudo_subchannel)
+ return -ENOMEM;
+ css[nr]->pseudo_subchannel->dev.parent = &css[nr]->device;
+ css[nr]->pseudo_subchannel->dev.release = css_subchannel_release;
+ sprintf(css[nr]->pseudo_subchannel->dev.bus_id, "defunct");
+ ret = cio_create_sch_lock(css[nr]->pseudo_subchannel);
+ if (ret) {
+ kfree(css[nr]->pseudo_subchannel);
+ return ret;
+ }
mutex_init(&css[nr]->mutex);
css[nr]->valid = 1;
css[nr]->cssid = nr;
css[nr]->device.release = channel_subsystem_release;
tod_high = (u32) (get_clock() >> 32);
css_generate_pgid(css[nr], tod_high);
+ return 0;
}
/*
ret = -ENOMEM;
goto out_unregister;
}
- setup_css(i);
- ret = device_register(&css[i]->device);
+ ret = setup_css(i);
if (ret)
goto out_free;
+ ret = device_register(&css[i]->device);
+ if (ret)
+ goto out_free_all;
if (css_characteristics_avail &&
css_chsc_characteristics.secm) {
ret = device_create_file(&css[i]->device,
if (ret)
goto out_device;
}
+ ret = device_register(&css[i]->pseudo_subchannel->dev);
+ if (ret)
+ goto out_file;
}
css_init_done = 1;
for_each_subchannel(__init_channel_subsystem, NULL);
return 0;
+out_file:
+ device_remove_file(&css[i]->device, &dev_attr_cm_enable);
out_device:
device_unregister(&css[i]->device);
+out_free_all:
+ kfree(css[i]->pseudo_subchannel->lock);
+ kfree(css[i]->pseudo_subchannel);
out_free:
kfree(css[i]);
out_unregister:
while (i > 0) {
i--;
+ device_unregister(&css[i]->pseudo_subchannel->dev);
if (css_characteristics_avail && css_chsc_characteristics.secm)
device_remove_file(&css[i]->device,
&dev_attr_cm_enable);
return ret;
}
+int sch_is_pseudo_sch(struct subchannel *sch)
+{
+ return sch == to_css(sch->dev.parent)->pseudo_subchannel;
+}
+
/*
* find a driver for a subchannel. They identify by the subchannel
* type with the exception that the console subchannel driver has its own
} __attribute__ ((packed,aligned(4)));
struct ccw_device_private {
+ struct ccw_device *cdev;
+ struct subchannel *sch;
int state; /* device state */
atomic_t onoff;
unsigned long registered;
int cm_enabled;
void *cub_addr1;
void *cub_addr2;
+ /* for orphaned ccw devices */
+ struct subchannel *pseudo_subchannel;
};
#define to_css(dev) container_of(dev, struct channel_subsystem, device)
int css_slow_subchannels_exist(void);
extern int need_rescan;
+int sch_is_pseudo_sch(struct subchannel *);
+
extern struct workqueue_struct *slow_path_wq;
extern struct work_struct slow_path_work;
+
+int subchannel_add_files (struct device *);
+extern struct attribute_group *subch_attr_groups[];
#endif
#include <asm/param.h> /* HZ */
#include "cio.h"
+#include "cio_debug.h"
#include "css.h"
#include "device.h"
#include "ioasm.h"
ssize_t ret = 0;
int chp;
- for (chp = 0; chp < 8; chp++)
- ret += sprintf (buf+ret, "%02x ", ssd->chpid[chp]);
-
+ if (ssd)
+ for (chp = 0; chp < 8; chp++)
+ ret += sprintf (buf+ret, "%02x ", ssd->chpid[chp]);
+ else
+ ret += sprintf (buf, "n/a");
ret += sprintf (buf+ret, "\n");
return min((ssize_t)PAGE_SIZE, ret);
}
return sprintf(buf, cdev->online ? "1\n" : "0\n");
}
+int ccw_device_is_orphan(struct ccw_device *cdev)
+{
+ return sch_is_pseudo_sch(to_subchannel(cdev->dev.parent));
+}
+
+static void ccw_device_unregister(struct work_struct *work)
+{
+ struct ccw_device_private *priv;
+ struct ccw_device *cdev;
+
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ cdev = priv->cdev;
+ if (test_and_clear_bit(1, &cdev->private->registered))
+ device_unregister(&cdev->dev);
+ put_device(&cdev->dev);
+}
+
static void
ccw_device_remove_disconnected(struct ccw_device *cdev)
{
struct subchannel *sch;
+ unsigned long flags;
/*
* Forced offline in disconnected state means
* 'throw away device'.
*/
+ if (ccw_device_is_orphan(cdev)) {
+ /* Deregister ccw device. */
+ spin_lock_irqsave(cdev->ccwlock, flags);
+ cdev->private->state = DEV_STATE_NOT_OPER;
+ spin_unlock_irqrestore(cdev->ccwlock, flags);
+ if (get_device(&cdev->dev)) {
+ PREPARE_WORK(&cdev->private->kick_work,
+ ccw_device_unregister);
+ queue_work(ccw_device_work, &cdev->private->kick_work);
+ }
+ return ;
+ }
sch = to_subchannel(cdev->dev.parent);
css_sch_device_unregister(sch);
/* Reset intparm to zeroes. */
struct ccw_device *cdev = to_ccwdev(dev);
struct subchannel *sch;
+ if (ccw_device_is_orphan(cdev))
+ return sprintf(buf, "no device\n");
switch (cdev->private->state) {
case DEV_STATE_BOXED:
return sprintf(buf, "boxed\n");
.attrs = subch_attrs,
};
-static inline int
-subchannel_add_files (struct device *dev)
-{
- return sysfs_create_group(&dev->kobj, &subch_attr_group);
-}
+struct attribute_group *subch_attr_groups[] = {
+ &subch_attr_group,
+ NULL,
+};
static struct attribute * ccwdev_attrs[] = {
&dev_attr_devtype.attr,
cdev = to_ccwdev(dev);
if ((cdev->private->state == DEV_STATE_DISCONNECTED) &&
+ !ccw_device_is_orphan(cdev) &&
ccw_dev_id_is_equal(&cdev->private->dev_id, &d->dev_id) &&
- (cdev != d->sibling)) {
- cdev->private->state = DEV_STATE_NOT_OPER;
+ (cdev != d->sibling))
return 1;
- }
return 0;
}
return dev ? to_ccwdev(dev) : NULL;
}
-static void
-ccw_device_add_changed(void *data)
+static int match_orphan(struct device *dev, void *data)
+{
+ struct ccw_dev_id *dev_id;
+ struct ccw_device *cdev;
+
+ dev_id = data;
+ cdev = to_ccwdev(dev);
+ return ccw_dev_id_is_equal(&cdev->private->dev_id, dev_id);
+}
+
+static struct ccw_device *
+get_orphaned_ccwdev_by_dev_id(struct channel_subsystem *css,
+ struct ccw_dev_id *dev_id)
{
+ struct device *dev;
+ dev = device_find_child(&css->pseudo_subchannel->dev, dev_id,
+ match_orphan);
+
+ return dev ? to_ccwdev(dev) : NULL;
+}
+
+static void
+ccw_device_add_changed(struct work_struct *work)
+{
+ struct ccw_device_private *priv;
struct ccw_device *cdev;
- cdev = data;
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ cdev = priv->cdev;
if (device_add(&cdev->dev)) {
put_device(&cdev->dev);
return;
}
}
-extern int css_get_ssd_info(struct subchannel *sch);
-
-void
-ccw_device_do_unreg_rereg(void *data)
+void ccw_device_do_unreg_rereg(struct work_struct *work)
{
+ struct ccw_device_private *priv;
struct ccw_device *cdev;
struct subchannel *sch;
- int need_rename;
- cdev = data;
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ cdev = priv->cdev;
sch = to_subchannel(cdev->dev.parent);
- if (cdev->private->dev_id.devno != sch->schib.pmcw.dev) {
- /*
- * The device number has changed. This is usually only when
- * a device has been detached under VM and then re-appeared
- * on another subchannel because of a different attachment
- * order than before. Ideally, we should should just switch
- * subchannels, but unfortunately, this is not possible with
- * the current implementation.
- * Instead, we search for the old subchannel for this device
- * number and deregister so there are no collisions with the
- * newly registered ccw_device.
- * FIXME: Find another solution so the block layer doesn't
- * get possibly sick...
- */
- struct ccw_device *other_cdev;
- struct ccw_dev_id dev_id;
-
- need_rename = 1;
- dev_id.devno = sch->schib.pmcw.dev;
- dev_id.ssid = sch->schid.ssid;
- other_cdev = get_disc_ccwdev_by_dev_id(&dev_id, cdev);
- if (other_cdev) {
- struct subchannel *other_sch;
-
- other_sch = to_subchannel(other_cdev->dev.parent);
- if (get_device(&other_sch->dev)) {
- stsch(other_sch->schid, &other_sch->schib);
- if (other_sch->schib.pmcw.dnv) {
- other_sch->schib.pmcw.intparm = 0;
- cio_modify(other_sch);
- }
- css_sch_device_unregister(other_sch);
- }
- }
- /* Update ssd info here. */
- css_get_ssd_info(sch);
- cdev->private->dev_id.devno = sch->schib.pmcw.dev;
- } else
- need_rename = 0;
+
device_remove_files(&cdev->dev);
if (test_and_clear_bit(1, &cdev->private->registered))
device_del(&cdev->dev);
- if (need_rename)
- snprintf (cdev->dev.bus_id, BUS_ID_SIZE, "0.%x.%04x",
- sch->schid.ssid, sch->schib.pmcw.dev);
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_add_changed, cdev);
+ ccw_device_add_changed);
queue_work(ccw_device_work, &cdev->private->kick_work);
}
kfree(cdev);
}
+static struct ccw_device * io_subchannel_allocate_dev(struct subchannel *sch)
+{
+ struct ccw_device *cdev;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (cdev) {
+ cdev->private = kzalloc(sizeof(struct ccw_device_private),
+ GFP_KERNEL | GFP_DMA);
+ if (cdev->private)
+ return cdev;
+ }
+ kfree(cdev);
+ return ERR_PTR(-ENOMEM);
+}
+
+static int io_subchannel_initialize_dev(struct subchannel *sch,
+ struct ccw_device *cdev)
+{
+ cdev->private->cdev = cdev;
+ atomic_set(&cdev->private->onoff, 0);
+ cdev->dev.parent = &sch->dev;
+ cdev->dev.release = ccw_device_release;
+ INIT_LIST_HEAD(&cdev->private->kick_work.entry);
+ /* Do first half of device_register. */
+ device_initialize(&cdev->dev);
+ if (!get_device(&sch->dev)) {
+ if (cdev->dev.release)
+ cdev->dev.release(&cdev->dev);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static struct ccw_device * io_subchannel_create_ccwdev(struct subchannel *sch)
+{
+ struct ccw_device *cdev;
+ int ret;
+
+ cdev = io_subchannel_allocate_dev(sch);
+ if (!IS_ERR(cdev)) {
+ ret = io_subchannel_initialize_dev(sch, cdev);
+ if (ret) {
+ kfree(cdev);
+ cdev = ERR_PTR(ret);
+ }
+ }
+ return cdev;
+}
+
+static int io_subchannel_recog(struct ccw_device *, struct subchannel *);
+
+static void sch_attach_device(struct subchannel *sch,
+ struct ccw_device *cdev)
+{
+ spin_lock_irq(sch->lock);
+ sch->dev.driver_data = cdev;
+ cdev->private->schid = sch->schid;
+ cdev->ccwlock = sch->lock;
+ device_trigger_reprobe(sch);
+ spin_unlock_irq(sch->lock);
+}
+
+static void sch_attach_disconnected_device(struct subchannel *sch,
+ struct ccw_device *cdev)
+{
+ struct subchannel *other_sch;
+ int ret;
+
+ other_sch = to_subchannel(get_device(cdev->dev.parent));
+ ret = device_move(&cdev->dev, &sch->dev);
+ if (ret) {
+ CIO_MSG_EVENT(2, "Moving disconnected device 0.%x.%04x failed "
+ "(ret=%d)!\n", cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno, ret);
+ put_device(&other_sch->dev);
+ return;
+ }
+ other_sch->dev.driver_data = NULL;
+ /* No need to keep a subchannel without ccw device around. */
+ css_sch_device_unregister(other_sch);
+ put_device(&other_sch->dev);
+ sch_attach_device(sch, cdev);
+}
+
+static void sch_attach_orphaned_device(struct subchannel *sch,
+ struct ccw_device *cdev)
+{
+ int ret;
+
+ /* Try to move the ccw device to its new subchannel. */
+ ret = device_move(&cdev->dev, &sch->dev);
+ if (ret) {
+ CIO_MSG_EVENT(0, "Moving device 0.%x.%04x from orphanage "
+ "failed (ret=%d)!\n",
+ cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno, ret);
+ return;
+ }
+ sch_attach_device(sch, cdev);
+}
+
+static void sch_create_and_recog_new_device(struct subchannel *sch)
+{
+ struct ccw_device *cdev;
+
+ /* Need to allocate a new ccw device. */
+ cdev = io_subchannel_create_ccwdev(sch);
+ if (IS_ERR(cdev)) {
+ /* OK, we did everything we could... */
+ css_sch_device_unregister(sch);
+ return;
+ }
+ spin_lock_irq(sch->lock);
+ sch->dev.driver_data = cdev;
+ spin_unlock_irq(sch->lock);
+ /* Start recognition for the new ccw device. */
+ if (io_subchannel_recog(cdev, sch)) {
+ spin_lock_irq(sch->lock);
+ sch->dev.driver_data = NULL;
+ spin_unlock_irq(sch->lock);
+ if (cdev->dev.release)
+ cdev->dev.release(&cdev->dev);
+ css_sch_device_unregister(sch);
+ }
+}
+
+
+void ccw_device_move_to_orphanage(struct work_struct *work)
+{
+ struct ccw_device_private *priv;
+ struct ccw_device *cdev;
+ struct ccw_device *replacing_cdev;
+ struct subchannel *sch;
+ int ret;
+ struct channel_subsystem *css;
+ struct ccw_dev_id dev_id;
+
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ cdev = priv->cdev;
+ sch = to_subchannel(cdev->dev.parent);
+ css = to_css(sch->dev.parent);
+ dev_id.devno = sch->schib.pmcw.dev;
+ dev_id.ssid = sch->schid.ssid;
+
+ /*
+ * Move the orphaned ccw device to the orphanage so the replacing
+ * ccw device can take its place on the subchannel.
+ */
+ ret = device_move(&cdev->dev, &css->pseudo_subchannel->dev);
+ if (ret) {
+ CIO_MSG_EVENT(0, "Moving device 0.%x.%04x to orphanage failed "
+ "(ret=%d)!\n", cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno, ret);
+ return;
+ }
+ cdev->ccwlock = css->pseudo_subchannel->lock;
+ /*
+ * Search for the replacing ccw device
+ * - among the disconnected devices
+ * - in the orphanage
+ */
+ replacing_cdev = get_disc_ccwdev_by_dev_id(&dev_id, cdev);
+ if (replacing_cdev) {
+ sch_attach_disconnected_device(sch, replacing_cdev);
+ return;
+ }
+ replacing_cdev = get_orphaned_ccwdev_by_dev_id(css, &dev_id);
+ if (replacing_cdev) {
+ sch_attach_orphaned_device(sch, replacing_cdev);
+ return;
+ }
+ sch_create_and_recog_new_device(sch);
+}
+
/*
* Register recognized device.
*/
static void
-io_subchannel_register(void *data)
+io_subchannel_register(struct work_struct *work)
{
+ struct ccw_device_private *priv;
struct ccw_device *cdev;
struct subchannel *sch;
int ret;
unsigned long flags;
- cdev = data;
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ cdev = priv->cdev;
sch = to_subchannel(cdev->dev.parent);
/*
printk (KERN_WARNING "%s: could not register %s\n",
__func__, cdev->dev.bus_id);
put_device(&cdev->dev);
- spin_lock_irqsave(&sch->lock, flags);
+ spin_lock_irqsave(sch->lock, flags);
sch->dev.driver_data = NULL;
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
kfree (cdev->private);
kfree (cdev);
put_device(&sch->dev);
wake_up(&ccw_device_init_wq);
return;
}
-
- ret = subchannel_add_files(cdev->dev.parent);
- if (ret)
- printk(KERN_WARNING "%s: could not add attributes to %s\n",
- __func__, sch->dev.bus_id);
put_device(&cdev->dev);
out:
cdev->private->flags.recog_done = 1;
}
void
-ccw_device_call_sch_unregister(void *data)
+ccw_device_call_sch_unregister(struct work_struct *work)
{
- struct ccw_device *cdev = data;
+ struct ccw_device_private *priv;
+ struct ccw_device *cdev;
struct subchannel *sch;
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ cdev = priv->cdev;
sch = to_subchannel(cdev->dev.parent);
css_sch_device_unregister(sch);
/* Reset intparm to zeroes. */
break;
sch = to_subchannel(cdev->dev.parent);
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_call_sch_unregister, cdev);
+ ccw_device_call_sch_unregister);
queue_work(slow_path_wq, &cdev->private->kick_work);
if (atomic_dec_and_test(&ccw_device_init_count))
wake_up(&ccw_device_init_wq);
if (!get_device(&cdev->dev))
break;
PREPARE_WORK(&cdev->private->kick_work,
- io_subchannel_register, cdev);
+ io_subchannel_register);
queue_work(slow_path_wq, &cdev->private->kick_work);
break;
}
sch->dev.driver_data = cdev;
sch->driver = &io_subchannel_driver;
- cdev->ccwlock = &sch->lock;
+ cdev->ccwlock = sch->lock;
/* Init private data. */
priv = cdev->private;
atomic_inc(&ccw_device_init_count);
/* Start async. device sensing. */
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
rc = ccw_device_recognition(cdev);
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
if (rc) {
if (atomic_dec_and_test(&ccw_device_init_count))
wake_up(&ccw_device_init_wq);
return rc;
}
+static void ccw_device_move_to_sch(struct work_struct *work)
+{
+ struct ccw_device_private *priv;
+ int rc;
+ struct subchannel *sch;
+ struct ccw_device *cdev;
+ struct subchannel *former_parent;
+
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ sch = priv->sch;
+ cdev = priv->cdev;
+ former_parent = ccw_device_is_orphan(cdev) ?
+ NULL : to_subchannel(get_device(cdev->dev.parent));
+ mutex_lock(&sch->reg_mutex);
+ /* Try to move the ccw device to its new subchannel. */
+ rc = device_move(&cdev->dev, &sch->dev);
+ mutex_unlock(&sch->reg_mutex);
+ if (rc) {
+ CIO_MSG_EVENT(2, "Moving device 0.%x.%04x to subchannel "
+ "0.%x.%04x failed (ret=%d)!\n",
+ cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno, sch->schid.ssid,
+ sch->schid.sch_no, rc);
+ css_sch_device_unregister(sch);
+ goto out;
+ }
+ if (former_parent) {
+ spin_lock_irq(former_parent->lock);
+ former_parent->dev.driver_data = NULL;
+ spin_unlock_irq(former_parent->lock);
+ css_sch_device_unregister(former_parent);
+ /* Reset intparm to zeroes. */
+ former_parent->schib.pmcw.intparm = 0;
+ cio_modify(former_parent);
+ }
+ sch_attach_device(sch, cdev);
+out:
+ if (former_parent)
+ put_device(&former_parent->dev);
+ put_device(&cdev->dev);
+}
+
static int
io_subchannel_probe (struct subchannel *sch)
{
struct ccw_device *cdev;
int rc;
unsigned long flags;
+ struct ccw_dev_id dev_id;
if (sch->dev.driver_data) {
/*
cdev = sch->dev.driver_data;
device_initialize(&cdev->dev);
ccw_device_register(cdev);
- subchannel_add_files(&sch->dev);
/*
* Check if the device is already online. If it is
* the reference count needs to be corrected
get_device(&cdev->dev);
return 0;
}
- cdev = kzalloc (sizeof(*cdev), GFP_KERNEL);
+ /*
+ * First check if a fitting device may be found amongst the
+ * disconnected devices or in the orphanage.
+ */
+ dev_id.devno = sch->schib.pmcw.dev;
+ dev_id.ssid = sch->schid.ssid;
+ cdev = get_disc_ccwdev_by_dev_id(&dev_id, NULL);
if (!cdev)
- return -ENOMEM;
- cdev->private = kzalloc(sizeof(struct ccw_device_private),
- GFP_KERNEL | GFP_DMA);
- if (!cdev->private) {
- kfree(cdev);
- return -ENOMEM;
- }
- atomic_set(&cdev->private->onoff, 0);
- cdev->dev.parent = &sch->dev;
- cdev->dev.release = ccw_device_release;
- INIT_LIST_HEAD(&cdev->private->kick_work.entry);
- /* Do first half of device_register. */
- device_initialize(&cdev->dev);
-
- if (!get_device(&sch->dev)) {
- if (cdev->dev.release)
- cdev->dev.release(&cdev->dev);
- return -ENODEV;
+ cdev = get_orphaned_ccwdev_by_dev_id(to_css(sch->dev.parent),
+ &dev_id);
+ if (cdev) {
+ /*
+ * Schedule moving the device until when we have a registered
+ * subchannel to move to and succeed the probe. We can
+ * unregister later again, when the probe is through.
+ */
+ cdev->private->sch = sch;
+ PREPARE_WORK(&cdev->private->kick_work,
+ ccw_device_move_to_sch);
+ queue_work(slow_path_wq, &cdev->private->kick_work);
+ return 0;
}
+ cdev = io_subchannel_create_ccwdev(sch);
+ if (IS_ERR(cdev))
+ return PTR_ERR(cdev);
rc = io_subchannel_recog(cdev, sch);
if (rc) {
- spin_lock_irqsave(&sch->lock, flags);
+ spin_lock_irqsave(sch->lock, flags);
sch->dev.driver_data = NULL;
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
if (cdev->dev.release)
cdev->dev.release(&cdev->dev);
}
return rc;
}
-static void
-ccw_device_unregister(void *data)
-{
- struct ccw_device *cdev;
-
- cdev = (struct ccw_device *)data;
- if (test_and_clear_bit(1, &cdev->private->registered))
- device_unregister(&cdev->dev);
- put_device(&cdev->dev);
-}
-
static int
io_subchannel_remove (struct subchannel *sch)
{
*/
if (get_device(&cdev->dev)) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_unregister, cdev);
+ ccw_device_unregister);
queue_work(ccw_device_work, &cdev->private->kick_work);
}
return 0;
static struct ccw_device_private console_private;
static int console_cdev_in_use;
+static DEFINE_SPINLOCK(ccw_console_lock);
+
+spinlock_t * cio_get_console_lock(void)
+{
+ return &ccw_console_lock;
+}
+
static int
ccw_device_console_enable (struct ccw_device *cdev, struct subchannel *sch)
{
memset(&console_cdev, 0, sizeof(struct ccw_device));
memset(&console_private, 0, sizeof(struct ccw_device_private));
console_cdev.private = &console_private;
+ console_private.cdev = &console_cdev;
ret = ccw_device_console_enable(&console_cdev, sch);
if (ret) {
cio_release_console();
int ccw_device_cancel_halt_clear(struct ccw_device *);
-void ccw_device_do_unreg_rereg(void *);
-void ccw_device_call_sch_unregister(void *);
+void ccw_device_do_unreg_rereg(struct work_struct *);
+void ccw_device_call_sch_unregister(struct work_struct *);
+void ccw_device_move_to_orphanage(struct work_struct *);
+int ccw_device_is_orphan(struct ccw_device *);
int ccw_device_recognition(struct ccw_device *);
int ccw_device_online(struct ccw_device *);
/*
* Check if cu type and device type still match. If
* not, it is certainly another device and we have to
- * de- and re-register. Also check here for non-matching devno.
+ * de- and re-register.
*/
if (cdev->id.cu_type != cdev->private->senseid.cu_type ||
cdev->id.cu_model != cdev->private->senseid.cu_model ||
cdev->id.dev_type != cdev->private->senseid.dev_type ||
- cdev->id.dev_model != cdev->private->senseid.dev_model ||
- cdev->private->dev_id.devno != sch->schib.pmcw.dev) {
+ cdev->id.dev_model != cdev->private->senseid.dev_model) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_do_unreg_rereg, cdev);
+ ccw_device_do_unreg_rereg);
queue_work(ccw_device_work, &cdev->private->kick_work);
return 0;
}
}
static void
-ccw_device_oper_notify(void *data)
+ccw_device_oper_notify(struct work_struct *work)
{
+ struct ccw_device_private *priv;
struct ccw_device *cdev;
struct subchannel *sch;
int ret;
- cdev = data;
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ cdev = priv->cdev;
sch = to_subchannel(cdev->dev.parent);
ret = (sch->driver && sch->driver->notify) ?
sch->driver->notify(&sch->dev, CIO_OPER) : 0;
if (!ret)
/* Driver doesn't want device back. */
- ccw_device_do_unreg_rereg(cdev);
+ ccw_device_do_unreg_rereg(work);
else {
/* Reenable channel measurements, if needed. */
cmf_reenable(cdev);
if (cdev->private->flags.donotify) {
cdev->private->flags.donotify = 0;
- PREPARE_WORK(&cdev->private->kick_work, ccw_device_oper_notify,
- cdev);
+ PREPARE_WORK(&cdev->private->kick_work, ccw_device_oper_notify);
queue_work(ccw_device_notify_work, &cdev->private->kick_work);
}
wake_up(&cdev->private->wait_q);
static void
-ccw_device_nopath_notify(void *data)
+ccw_device_nopath_notify(struct work_struct *work)
{
+ struct ccw_device_private *priv;
struct ccw_device *cdev;
struct subchannel *sch;
int ret;
- cdev = data;
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ cdev = priv->cdev;
sch = to_subchannel(cdev->dev.parent);
/* Extra sanity. */
if (sch->lpm)
cio_disable_subchannel(sch);
if (get_device(&cdev->dev)) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_call_sch_unregister,
- cdev);
+ ccw_device_call_sch_unregister);
queue_work(ccw_device_work,
&cdev->private->kick_work);
} else
/* Reset oper notify indication after verify error. */
cdev->private->flags.donotify = 0;
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_nopath_notify, cdev);
+ ccw_device_nopath_notify);
queue_work(ccw_device_notify_work, &cdev->private->kick_work);
ccw_device_done(cdev, DEV_STATE_NOT_OPER);
break;
{
struct subchannel *sch;
+ if (ccw_device_is_orphan(cdev)) {
+ ccw_device_done(cdev, DEV_STATE_OFFLINE);
+ return 0;
+ }
sch = to_subchannel(cdev->dev.parent);
if (stsch(sch->schid, &sch->schib) || !sch->schib.pmcw.dnv)
return -ENODEV;
sch = to_subchannel(cdev->dev.parent);
if (get_device(&cdev->dev)) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_call_sch_unregister, cdev);
+ ccw_device_call_sch_unregister);
queue_work(ccw_device_work, &cdev->private->kick_work);
}
wake_up(&cdev->private->wait_q);
}
if (get_device(&cdev->dev)) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_call_sch_unregister, cdev);
+ ccw_device_call_sch_unregister);
queue_work(ccw_device_work, &cdev->private->kick_work);
}
wake_up(&cdev->private->wait_q);
sch = to_subchannel(cdev->dev.parent);
if (!sch->lpm) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_nopath_notify, cdev);
+ ccw_device_nopath_notify);
queue_work(ccw_device_notify_work,
&cdev->private->kick_work);
} else
ERR_PTR(-EIO));
if (!sch->lpm) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_nopath_notify, cdev);
+ ccw_device_nopath_notify);
queue_work(ccw_device_notify_work, &cdev->private->kick_work);
} else if (cdev->private->flags.doverify)
/* Start delayed path verification. */
sch = to_subchannel(cdev->dev.parent);
if (!sch->lpm) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_nopath_notify, cdev);
+ ccw_device_nopath_notify);
queue_work(ccw_device_notify_work,
&cdev->private->kick_work);
} else
if (ret == -ENODEV) {
if (!sch->lpm) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_nopath_notify, cdev);
+ ccw_device_nopath_notify);
queue_work(ccw_device_notify_work,
&cdev->private->kick_work);
} else
ERR_PTR(-EIO));
if (!sch->lpm) {
PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_nopath_notify, cdev);
+ ccw_device_nopath_notify);
queue_work(ccw_device_notify_work, &cdev->private->kick_work);
} else
/* Start delayed path verification. */
/* Update some values. */
if (stsch(sch->schid, &sch->schib))
return;
-
+ if (!sch->schib.pmcw.dnv)
+ return;
/*
* The pim, pam, pom values may not be accurate, but they are the best
* we have before performing device selection :/
sch->schib.pmcw.mp = 1;
sch->schib.pmcw.intparm = (__u32)(unsigned long)sch;
/* We should also udate ssd info, but this has to wait. */
- ccw_device_start_id(cdev, 0);
+ /* Check if this is another device which appeared on the same sch. */
+ if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) {
+ PREPARE_WORK(&cdev->private->kick_work,
+ ccw_device_move_to_orphanage);
+ queue_work(ccw_device_work, &cdev->private->kick_work);
+ } else
+ ccw_device_start_id(cdev, 0);
}
static void
ccw_device_set_timeout(cdev, 0);
if (ret == -EBUSY) {
/* Try again later. */
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
msleep(10);
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
continue;
}
if (ret != 0)
break;
/* Wait for end of request. */
cdev->private->intparm = magic;
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
wait_event(cdev->private->wait_q,
(cdev->private->intparm == -EIO) ||
(cdev->private->intparm == -EAGAIN) ||
(cdev->private->intparm == 0));
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
/* Check at least for channel end / device end */
if (cdev->private->intparm == -EIO) {
/* Non-retryable error. */
/* Success. */
break;
/* Try again later. */
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
msleep(10);
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
} while (1);
return ret;
return ret;
}
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
/* Save interrupt handler. */
handler = cdev->handler;
/* Temporarily install own handler. */
/* Restore interrupt handler. */
cdev->handler = handler;
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
clear_normalized_cda (rdc_ccw);
kfree(rdc_ccw);
rcd_ccw->count = ciw->count;
rcd_ccw->flags = CCW_FLAG_SLI;
- spin_lock_irq(&sch->lock);
+ spin_lock_irq(sch->lock);
/* Save interrupt handler. */
handler = cdev->handler;
/* Temporarily install own handler. */
/* Restore interrupt handler. */
cdev->handler = handler;
- spin_unlock_irq(&sch->lock);
+ spin_unlock_irq(sch->lock);
/*
* on success we update the user input parms
kfree(buf);
return -ENOMEM;
}
- spin_lock_irqsave(&sch->lock, flags);
+ spin_lock_irqsave(sch->lock, flags);
ret = cio_enable_subchannel(sch, 3);
if (ret)
goto out_unlock;
goto out_unlock;
}
cdev->private->irb.scsw.actl |= SCSW_ACTL_START_PEND;
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
wait_event(cdev->private->wait_q, cdev->private->irb.scsw.actl == 0);
- spin_lock_irqsave(&sch->lock, flags);
+ spin_lock_irqsave(sch->lock, flags);
cio_disable_subchannel(sch); //FIXME: return code?
if ((cdev->private->irb.scsw.dstat !=
(DEV_STAT_CHN_END|DEV_STAT_DEV_END)) ||
out_unlock:
kfree(buf);
kfree(buf2);
- spin_unlock_irqrestore(&sch->lock, flags);
+ spin_unlock_irqrestore(sch->lock, flags);
return ret;
}
#include <asm/timex.h>
#include <asm/debug.h>
+#include <asm/s390_rdev.h>
#include <asm/qdio.h>
#include "cio.h"
/******************** HERE WE GO ***********************************/
static const char version[] = "QDIO base support version 2";
+extern struct bus_type ccw_bus_type;
-#ifdef QDIO_PERFORMANCE_STATS
+static int qdio_performance_stats = 0;
static int proc_perf_file_registration;
static unsigned long i_p_c, i_p_nc, o_p_c, o_p_nc, ii_p_c, ii_p_nc;
static struct qdio_perf_stats perf_stats;
-#endif /* QDIO_PERFORMANCE_STATS */
static int hydra_thinints;
static int is_passthrough = 0;
QDIO_DBF_TEXT4(0,trace,"sigasync");
QDIO_DBF_HEX4(0,trace,&q,sizeof(void*));
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.siga_syncs++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ perf_stats.siga_syncs++;
cc = do_siga_sync(q->schid, gpr2, gpr3);
if (cc)
__u32 busy_bit;
__u64 start_time=0;
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.siga_outs++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ perf_stats.siga_outs++;
QDIO_DBF_TEXT4(0,trace,"sigaout");
QDIO_DBF_HEX4(0,trace,&q,sizeof(void*));
QDIO_DBF_TEXT4(0,trace,"sigain");
QDIO_DBF_HEX4(0,trace,&q,sizeof(void*));
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.siga_ins++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ perf_stats.siga_ins++;
cc = do_siga_input(q->schid, q->mask);
if (unlikely(qdio_reserve_q(q))) {
qdio_release_q(q);
-#ifdef QDIO_PERFORMANCE_STATS
- o_p_c++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ o_p_c++;
/* as we're sissies, we'll check next time */
if (likely(!atomic_read(&q->is_in_shutdown))) {
qdio_mark_q(q);
}
return;
}
-#ifdef QDIO_PERFORMANCE_STATS
- o_p_nc++;
- perf_stats.tl_runs++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats) {
+ o_p_nc++;
+ perf_stats.tl_runs++;
+ }
/* see comment in qdio_kick_outbound_q */
siga_attempts=atomic_read(&q->busy_siga_counter);
{
int i;
-#ifdef QDIO_PERFORMANCE_STATS
static int old_pcis=0;
static int old_thinints=0;
- if ((old_pcis==perf_stats.pcis)&&(old_thinints==perf_stats.thinints))
- perf_stats.start_time_inbound=NOW;
- else
- old_pcis=perf_stats.pcis;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats) {
+ if ((old_pcis==perf_stats.pcis)&&
+ (old_thinints==perf_stats.thinints))
+ perf_stats.start_time_inbound=NOW;
+ else
+ old_pcis=perf_stats.pcis;
+ }
i=qdio_get_inbound_buffer_frontier(q);
if ( (i!=GET_SAVED_FRONTIER(q)) ||
q->siga_error=0;
q->error_status_flags=0;
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.inbound_time+=NOW-perf_stats.start_time_inbound;
- perf_stats.inbound_cnt++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats) {
+ perf_stats.inbound_time+=NOW-perf_stats.start_time_inbound;
+ perf_stats.inbound_cnt++;
+ }
}
static inline void
*/
if (unlikely(qdio_reserve_q(q))) {
qdio_release_q(q);
-#ifdef QDIO_PERFORMANCE_STATS
- ii_p_c++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ ii_p_c++;
/*
* as we might just be about to stop polling, we make
* sure that we check again at least once more
tiqdio_sched_tl();
return;
}
-#ifdef QDIO_PERFORMANCE_STATS
- ii_p_nc++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ ii_p_nc++;
if (unlikely(atomic_read(&q->is_in_shutdown))) {
qdio_unmark_q(q);
goto out;
irq_ptr = (struct qdio_irq*)q->irq_ptr;
for (i=0;i<irq_ptr->no_output_qs;i++) {
oq = irq_ptr->output_qs[i];
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.tl_runs--;
-#endif /* QDIO_PERFORMANCE_STATS */
- if (!qdio_is_outbound_q_done(oq))
+ if (!qdio_is_outbound_q_done(oq)) {
+ if (qdio_performance_stats)
+ perf_stats.tl_runs--;
__qdio_outbound_processing(oq);
+ }
}
}
if (unlikely(qdio_reserve_q(q))) {
qdio_release_q(q);
-#ifdef QDIO_PERFORMANCE_STATS
- i_p_c++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ i_p_c++;
/* as we're sissies, we'll check next time */
if (likely(!atomic_read(&q->is_in_shutdown))) {
qdio_mark_q(q);
}
return;
}
-#ifdef QDIO_PERFORMANCE_STATS
- i_p_nc++;
- perf_stats.tl_runs++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats) {
+ i_p_nc++;
+ perf_stats.tl_runs++;
+ }
again:
if (qdio_has_inbound_q_moved(q)) {
if (unlikely(qdio_reserve_q(q))) {
qdio_release_q(q);
-#ifdef QDIO_PERFORMANCE_STATS
- ii_p_c++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ ii_p_c++;
/*
* as we might just be about to stop polling, we make
* sure that we check again at least once more
{
QDIO_DBF_TEXT4(0,trace,"iqdio_tl");
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.tl_runs++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ perf_stats.tl_runs++;
tiqdio_inbound_checks();
}
{
QDIO_DBF_TEXT4(0,trace,"thin_int");
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.thinints++;
- perf_stats.start_time_inbound=NOW;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats) {
+ perf_stats.thinints++;
+ perf_stats.start_time_inbound=NOW;
+ }
/* SVS only when needed:
* issue SVS to benefit from iqdio interrupt avoidance
int i;
struct qdio_q *q;
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.pcis++;
- perf_stats.start_time_inbound=NOW;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats) {
+ perf_stats.pcis++;
+ perf_stats.start_time_inbound=NOW;
+ }
for (i=0;i<irq_ptr->no_input_qs;i++) {
q=irq_ptr->input_qs[i];
if (q->is_input_q&QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT)
qdio_mark_q(q);
else {
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.tl_runs--;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ perf_stats.tl_runs--;
__qdio_inbound_processing(q);
}
}
return;
for (i=0;i<irq_ptr->no_output_qs;i++) {
q=irq_ptr->output_qs[i];
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.tl_runs--;
-#endif /* QDIO_PERFORMANCE_STATS */
if (qdio_is_outbound_q_done(q))
continue;
+ if (qdio_performance_stats)
+ perf_stats.tl_runs--;
if (!irq_ptr->sync_done_on_outb_pcis)
SYNC_MEMORY;
__qdio_outbound_processing(q);
}
static void
-qdio_call_shutdown(void *data)
+qdio_call_shutdown(struct work_struct *work)
{
+ struct ccw_device_private *priv;
struct ccw_device *cdev;
- cdev = (struct ccw_device *)data;
+ priv = container_of(work, struct ccw_device_private, kick_work);
+ cdev = priv->cdev;
qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
put_device(&cdev->dev);
}
if (get_device(&cdev->dev)) {
/* Can't call shutdown from interrupt context. */
PREPARE_WORK(&cdev->private->kick_work,
- qdio_call_shutdown, (void *)cdev);
+ qdio_call_shutdown);
queue_work(ccw_device_work, &cdev->private->kick_work);
}
break;
struct qdio_irq *irq = (struct qdio_irq *) q->irq_ptr;
/* This is the outbound handling of queues */
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.start_time_outbound=NOW;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ perf_stats.start_time_outbound=NOW;
qdio_do_qdio_fill_output(q,qidx,count,buffers);
used_elements=atomic_add_return(count, &q->number_of_buffers_used) - count;
if (callflags&QDIO_FLAG_DONT_SIGA) {
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.outbound_time+=NOW-perf_stats.start_time_outbound;
- perf_stats.outbound_cnt++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats) {
+ perf_stats.outbound_time+=NOW-perf_stats.start_time_outbound;
+ perf_stats.outbound_cnt++;
+ }
return;
}
if (q->is_iqdio_q) {
qdio_kick_outbound_q(q);
} else {
QDIO_DBF_TEXT3(0,trace, "fast-req");
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.fast_reqs++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats)
+ perf_stats.fast_reqs++;
}
}
/*
__qdio_outbound_processing(q);
}
-#ifdef QDIO_PERFORMANCE_STATS
- perf_stats.outbound_time+=NOW-perf_stats.start_time_outbound;
- perf_stats.outbound_cnt++;
-#endif /* QDIO_PERFORMANCE_STATS */
+ if (qdio_performance_stats) {
+ perf_stats.outbound_time+=NOW-perf_stats.start_time_outbound;
+ perf_stats.outbound_cnt++;
+ }
}
/* count must be 1 in iqdio */
return 0;
}
-#ifdef QDIO_PERFORMANCE_STATS
static int
qdio_perf_procfile_read(char *buffer, char **buffer_location, off_t offset,
int buffer_length, int *eof, void *data)
_OUTP_IT("i_p_nc/c=%lu/%lu\n",i_p_nc,i_p_c);
_OUTP_IT("ii_p_nc/c=%lu/%lu\n",ii_p_nc,ii_p_c);
_OUTP_IT("o_p_nc/c=%lu/%lu\n",o_p_nc,o_p_c);
- _OUTP_IT("Number of tasklet runs (total) : %u\n",
+ _OUTP_IT("Number of tasklet runs (total) : %lu\n",
perf_stats.tl_runs);
_OUTP_IT("\n");
- _OUTP_IT("Number of SIGA sync's issued : %u\n",
+ _OUTP_IT("Number of SIGA sync's issued : %lu\n",
perf_stats.siga_syncs);
- _OUTP_IT("Number of SIGA in's issued : %u\n",
+ _OUTP_IT("Number of SIGA in's issued : %lu\n",
perf_stats.siga_ins);
- _OUTP_IT("Number of SIGA out's issued : %u\n",
+ _OUTP_IT("Number of SIGA out's issued : %lu\n",
perf_stats.siga_outs);
- _OUTP_IT("Number of PCIs caught : %u\n",
+ _OUTP_IT("Number of PCIs caught : %lu\n",
perf_stats.pcis);
- _OUTP_IT("Number of adapter interrupts caught : %u\n",
+ _OUTP_IT("Number of adapter interrupts caught : %lu\n",
perf_stats.thinints);
- _OUTP_IT("Number of fast requeues (outg. SBALs w/o SIGA) : %u\n",
+ _OUTP_IT("Number of fast requeues (outg. SBALs w/o SIGA) : %lu\n",
perf_stats.fast_reqs);
_OUTP_IT("\n");
- _OUTP_IT("Total time of all inbound actions (us) incl. UL : %u\n",
+ _OUTP_IT("Total time of all inbound actions (us) incl. UL : %lu\n",
perf_stats.inbound_time);
- _OUTP_IT("Number of inbound transfers : %u\n",
+ _OUTP_IT("Number of inbound transfers : %lu\n",
perf_stats.inbound_cnt);
- _OUTP_IT("Total time of all outbound do_QDIOs (us) : %u\n",
+ _OUTP_IT("Total time of all outbound do_QDIOs (us) : %lu\n",
perf_stats.outbound_time);
- _OUTP_IT("Number of do_QDIOs outbound : %u\n",
+ _OUTP_IT("Number of do_QDIOs outbound : %lu\n",
perf_stats.outbound_cnt);
_OUTP_IT("\n");
}
static struct proc_dir_entry *qdio_perf_proc_file;
-#endif /* QDIO_PERFORMANCE_STATS */
static void
qdio_add_procfs_entry(void)
{
-#ifdef QDIO_PERFORMANCE_STATS
proc_perf_file_registration=0;
qdio_perf_proc_file=create_proc_entry(QDIO_PERF,
S_IFREG|0444,&proc_root);
QDIO_PRINT_WARN("was not able to register perf. " \
"proc-file (%i).\n",
proc_perf_file_registration);
-#endif /* QDIO_PERFORMANCE_STATS */
}
static void
qdio_remove_procfs_entry(void)
{
-#ifdef QDIO_PERFORMANCE_STATS
perf_stats.tl_runs=0;
if (!proc_perf_file_registration) /* means if it went ok earlier */
remove_proc_entry(QDIO_PERF,&proc_root);
-#endif /* QDIO_PERFORMANCE_STATS */
}
+/**
+ * attributes in sysfs
+ *****************************************************************************/
+
+static ssize_t
+qdio_performance_stats_show(struct bus_type *bus, char *buf)
+{
+ return sprintf(buf, "%i\n", qdio_performance_stats ? 1 : 0);
+}
+
+static ssize_t
+qdio_performance_stats_store(struct bus_type *bus, const char *buf, size_t count)
+{
+ char *tmp;
+ int i;
+
+ i = simple_strtoul(buf, &tmp, 16);
+ if ((i == 0) || (i == 1)) {
+ if (i == qdio_performance_stats)
+ return count;
+ qdio_performance_stats = i;
+ if (i==0) {
+ /* reset perf. stat. info */
+ i_p_nc = 0;
+ i_p_c = 0;
+ ii_p_nc = 0;
+ ii_p_c = 0;
+ o_p_nc = 0;
+ o_p_c = 0;
+ memset(&perf_stats, 0, sizeof(struct qdio_perf_stats));
+ }
+ } else {
+ QDIO_PRINT_WARN("QDIO performance_stats: write 0 or 1 to this file!\n");
+ return -EINVAL;
+ }
+ return count;
+}
+
+static BUS_ATTR(qdio_performance_stats, 0644, qdio_performance_stats_show,
+ qdio_performance_stats_store);
+
static void
tiqdio_register_thinints(void)
{
kfree(indicators);
}
+
static void
qdio_unregister_dbf_views(void)
{
init_QDIO(void)
{
int res;
-#ifdef QDIO_PERFORMANCE_STATS
void *ptr;
-#endif /* QDIO_PERFORMANCE_STATS */
printk("qdio: loading %s\n",version);
return res;
QDIO_DBF_TEXT0(0,setup,"initQDIO");
+ res = bus_create_file(&ccw_bus_type, &bus_attr_qdio_performance_stats);
-#ifdef QDIO_PERFORMANCE_STATS
- memset((void*)&perf_stats,0,sizeof(perf_stats));
+ memset((void*)&perf_stats,0,sizeof(perf_stats));
QDIO_DBF_TEXT0(0,setup,"perfstat");
ptr=&perf_stats;
QDIO_DBF_HEX0(0,setup,&ptr,sizeof(void*));
-#endif /* QDIO_PERFORMANCE_STATS */
qdio_add_procfs_entry();
qdio_release_qdio_memory();
qdio_unregister_dbf_views();
mempool_destroy(qdio_mempool_scssc);
-
+ bus_remove_file(&ccw_bus_type, &bus_attr_qdio_performance_stats);
printk("qdio: %s: module removed\n",version);
}
#endif /* CONFIG_QDIO_DEBUG */
#define QDIO_USE_PROCESSING_STATE
-#ifdef CONFIG_QDIO_PERF_STATS
-#define QDIO_PERFORMANCE_STATS
-#endif /* CONFIG_QDIO_PERF_STATS */
-
#define QDIO_MINIMAL_BH_RELIEF_TIME 16
#define QDIO_TIMER_POLL_VALUE 1
#define IQDIO_TIMER_POLL_VALUE 1
#define CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS 0x08
#define CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS 0x04
-#ifdef QDIO_PERFORMANCE_STATS
struct qdio_perf_stats {
- unsigned int tl_runs;
+ unsigned long tl_runs;
- unsigned int siga_outs;
- unsigned int siga_ins;
- unsigned int siga_syncs;
- unsigned int pcis;
- unsigned int thinints;
- unsigned int fast_reqs;
+ unsigned long siga_outs;
+ unsigned long siga_ins;
+ unsigned long siga_syncs;
+ unsigned long pcis;
+ unsigned long thinints;
+ unsigned long fast_reqs;
__u64 start_time_outbound;
- unsigned int outbound_cnt;
- unsigned int outbound_time;
+ unsigned long outbound_cnt;
+ unsigned long outbound_time;
__u64 start_time_inbound;
- unsigned int inbound_cnt;
- unsigned int inbound_time;
+ unsigned long inbound_cnt;
+ unsigned long inbound_time;
};
-#endif /* QDIO_PERFORMANCE_STATS */
/* unlikely as the later the better */
#define SYNC_MEMORY if (unlikely(q->siga_sync)) qdio_siga_sync_q(q)
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <asm/s390_rdev.h>
+#include <asm/reset.h>
#include "ap_bus.h"
mutex_unlock(&ap_poll_thread_mutex);
}
+static void ap_reset(void)
+{
+ int i, j;
+
+ for (i = 0; i < AP_DOMAINS; i++)
+ for (j = 0; j < AP_DEVICES; j++)
+ ap_reset_queue(AP_MKQID(j, i));
+}
+
+static struct reset_call ap_reset_call = {
+ .fn = ap_reset,
+};
+
/**
* The module initialization code.
*/
printk(KERN_WARNING "AP instructions not installed.\n");
return -ENODEV;
}
+ register_reset_call(&ap_reset_call);
/* Create /sys/bus/ap. */
rc = bus_register(&ap_bus_type);
bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
bus_unregister(&ap_bus_type);
out:
+ unregister_reset_call(&ap_reset_call);
return rc;
}
for (i = 0; ap_bus_attrs[i]; i++)
bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
bus_unregister(&ap_bus_type);
+ unregister_reset_call(&ap_reset_call);
}
#ifndef CONFIG_ZCRYPT_MONOLITHIC
struct completion work;
int rc;
- ap_msg.message = (void *) kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
+ ap_msg.message = kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
struct completion work;
int rc;
- ap_msg.message = (void *) kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
+ ap_msg.message = kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
struct completion work;
int rc;
- ap_msg.message = (void *) kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
+ ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
struct completion work;
int rc;
- ap_msg.message = (void *) kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
+ ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
};
int rc;
- ap_msg.message = (void *) kmalloc(PCIXCC_MAX_XCRB_MESSAGE_SIZE, GFP_KERNEL);
+ ap_msg.message = kmalloc(PCIXCC_MAX_XCRB_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
return -1;
}
memset(ch, 0, sizeof (struct channel));
- if ((ch->ccw = (struct ccw1 *) kmalloc(8*sizeof(struct ccw1),
+ if ((ch->ccw = kmalloc(8*sizeof(struct ccw1),
GFP_KERNEL | GFP_DMA)) == NULL) {
kfree(ch);
ctc_pr_warn("ctc: Out of memory in add_channel\n");
return -1;
}
fsm_newstate(ch->fsm, CH_STATE_IDLE);
- if ((ch->irb = (struct irb *) kmalloc(sizeof (struct irb),
+ if ((ch->irb = kmalloc(sizeof (struct irb),
GFP_KERNEL)) == NULL) {
ctc_pr_warn("ctc: Out of memory in add_channel\n");
kfree_fsm(ch->fsm);
DBF_TEXT(trace, 4, __FUNCTION__);
if (!priv)
return;
- sbuf = (char *)kmalloc(2048, GFP_KERNEL);
+ sbuf = kmalloc(2048, GFP_KERNEL);
if (sbuf == NULL)
return;
p = sbuf;
}
/* Allocate handler entry */
- new_handler = (handler *)kmalloc(sizeof(handler), GFP_ATOMIC);
+ new_handler = kmalloc(sizeof(handler), GFP_ATOMIC);
if (new_handler == NULL) {
printk(KERN_WARNING "%s: storage allocation for new handler "
"failed.\n", __FUNCTION__);
return 0;
len = strlen(devstr) + 1;
- str = (char *) kmalloc(len, GFP_KERNEL);
+ str = kmalloc(len, GFP_KERNEL);
if (!str)
goto err_out;
memcpy(str, devstr, len);
static ssize_t bpp_read(struct file *f, char __user *c, size_t cnt, loff_t * ppos)
{
long rc;
- unsigned minor = iminor(f->f_dentry->d_inode);
+ unsigned minor = iminor(f->f_path.dentry->d_inode);
if (minor >= BPP_NO) return -ENODEV;
if (!instances[minor].present) return -ENODEV;
static ssize_t bpp_write(struct file *f, const char __user *c, size_t cnt, loff_t * ppos)
{
long errno = 0;
- unsigned minor = iminor(f->f_dentry->d_inode);
+ unsigned minor = iminor(f->f_path.dentry->d_inode);
if (minor >= BPP_NO) return -ENODEV;
if (!instances[minor].present) return -ENODEV;
case WIOCSTOP:
case WIOCGSTAT:
lock_kernel();
- rval = wd_ioctl(file->f_dentry->d_inode, file, cmd, arg);
+ rval = wd_ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
unlock_kernel();
break;
/* everything else is handled by the generic compat layer */
__u8 ireg = 0;
int error = 0;
- if (D7S_MINOR != iminor(file->f_dentry->d_inode))
+ if (D7S_MINOR != iminor(file->f_path.dentry->d_inode))
return -ENODEV;
lock_kernel();
case OPROMSETCUR:
case OPROMPCI2NODE:
case OPROMPATH2NODE:
- rval = openprom_ioctl(file->f_dentry->d_inode, file, cmd, arg);
+ rval = openprom_ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
break;
}
unsigned int map_size, ret, map_offset;
struct vfc_dev *dev;
- dev = vfc_get_dev_ptr(iminor(file->f_dentry->d_inode));
+ dev = vfc_get_dev_ptr(iminor(file->f_path.dentry->d_inode));
if(dev == NULL)
return -ENODEV;
if (!cards)
return -ENODEV;
- vfc_dev_lst = (struct vfc_dev **)kmalloc(sizeof(struct vfc_dev *) *
+ vfc_dev_lst = kmalloc(sizeof(struct vfc_dev *) *
(cards+1),
GFP_KERNEL);
if (vfc_dev_lst == NULL)
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
- depends on SUN3 && SCSI && BROKEN
+ depends on SUN3 && SCSI
select SCSI_SPI_ATTRS
help
This option will enable support for the OBIO (onboard io) NCR5380
if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
- fsa_dev_ptr = (struct fsa_dev_info *) kmalloc(
+ fsa_dev_ptr = kmalloc(
sizeof(*fsa_dev_ptr) * maximum_num_containers, GFP_KERNEL);
if (!fsa_dev_ptr) {
aac_fib_free(fibptr);
* Ok now init the communication subsystem
*/
- dev->queues = (struct aac_queue_block *) kmalloc(sizeof(struct aac_queue_block), GFP_KERNEL);
+ dev->queues = kmalloc(sizeof(struct aac_queue_block), GFP_KERNEL);
if (dev->queues == NULL) {
printk(KERN_ERR "Error could not allocate comm region.\n");
return NULL;
#endif
int i;
ccb[mbo].op = 2; /* SCSI Initiator Command w/scatter-gather */
- SCpnt->host_scribble = (unsigned char *) kmalloc(512, GFP_KERNEL | GFP_DMA);
+ SCpnt->host_scribble = kmalloc(512, GFP_KERNEL | GFP_DMA);
sgpnt = (struct scatterlist *) SCpnt->request_buffer;
cptr = (struct chain *) SCpnt->host_scribble;
if (cptr == NULL) {
}
}
scb_count = min( (i-1), p->scb_data->maxscbs - p->scb_data->numscbs);
- scb_ap = (struct aic7xxx_scb *)kmalloc(sizeof (struct aic7xxx_scb) * scb_count
+ scb_ap = kmalloc(sizeof (struct aic7xxx_scb) * scb_count
+ sizeof(struct aic7xxx_scb_dma), GFP_ATOMIC);
if (scb_ap == NULL)
return(0);
dprintkdbg(DBG_1, "Allocate %i pages for SG tables\n", pages);
while (pages--) {
- ptr = (struct SGentry *)kmalloc(PAGE_SIZE, GFP_KERNEL);
+ ptr = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!ptr) {
adapter_sg_tables_free(acb);
return 1;
s32 rcode;
memset(msg, 0, sizeof(msg));
- buf = (u8*)kmalloc(80,GFP_KERNEL|ADDR32);
+ buf = kmalloc(80,GFP_KERNEL|ADDR32);
if(!buf){
printk(KERN_ERR"%s: Could not allocate buffer\n",pHba->name);
return;
schedule_timeout_uninterruptible(1);
} while (m == EMPTY_QUEUE);
- status = (u8*)kmalloc(4, GFP_KERNEL|ADDR32);
+ status = kmalloc(4, GFP_KERNEL|ADDR32);
if(status == NULL) {
adpt_send_nop(pHba, m);
printk(KERN_ERR"IOP reset failed - no free memory.\n");
}
continue;
}
- d = (struct i2o_device *)kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
+ d = kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
if(d==NULL)
{
printk(KERN_CRIT"%s: Out of memory for I2O device data.\n",pHba->name);
pDev = pDev->next_lun;
}
if(!pDev ) { // Something new add it
- d = (struct i2o_device *)kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
+ d = kmalloc(sizeof(struct i2o_device), GFP_KERNEL);
if(d==NULL)
{
printk(KERN_CRIT "Out of memory for I2O device data.\n");
kfree(pHba->reply_pool);
- pHba->reply_pool = (u32*)kmalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
+ pHba->reply_pool = kmalloc(pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4, GFP_KERNEL|ADDR32);
if(!pHba->reply_pool){
printk(KERN_ERR"%s: Could not allocate reply pool\n",pHba->name);
return -1;
for (; tul_num_scb >= MAX_TARGETS + 3; tul_num_scb--) {
i = tul_num_ch * tul_num_scb * sizeof(SCB);
- if ((tul_scb = (SCB *) kmalloc(i, GFP_ATOMIC | GFP_DMA)) != NULL)
+ if ((tul_scb = kmalloc(i, GFP_ATOMIC | GFP_DMA)) != NULL)
break;
}
if (tul_scb == NULL) {
dev_num = i;
/* allocate a struct osst_tape for this device */
- tpnt = (struct osst_tape *)kmalloc(sizeof(struct osst_tape), GFP_ATOMIC);
+ tpnt = kmalloc(sizeof(struct osst_tape), GFP_ATOMIC);
if (tpnt == NULL) {
write_unlock(&os_scsi_tapes_lock);
printk(KERN_ERR "osst :E: Can't allocate device descriptor, device not attached.\n");
#endif
return 0;
}
- fcs = (struct ctrl_inquiry *) kmalloc (sizeof (struct ctrl_inquiry) * fcscount, GFP_DMA);
+ fcs = kmalloc(sizeof (struct ctrl_inquiry) * fcscount, GFP_DMA);
if (!fcs) {
printk ("PLUTO: Not enough memory to probe\n");
return 0;
*/
static long sd_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct block_device *bdev = file->f_dentry->d_inode->i_bdev;
+ struct block_device *bdev = file->f_path.dentry->d_inode->i_bdev;
struct gendisk *disk = bdev->bd_disk;
struct scsi_device *sdev = scsi_disk(disk)->device;
if (!xa_test)
return 0;
- raw_sector = (unsigned char *) kmalloc(2048, GFP_KERNEL | SR_GFP_DMA(cd));
+ raw_sector = kmalloc(2048, GFP_KERNEL | SR_GFP_DMA(cd));
if (!raw_sector)
return -ENOMEM;
if (0 == sr_read_sector(cd, cd->ms_offset + 16,
density = (blocklength > 2048) ? 0x81 : 0x83;
#endif
- buffer = (unsigned char *) kmalloc(512, GFP_KERNEL | GFP_DMA);
+ buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
if (!buffer)
return -ENOMEM;
if (cd->cdi.mask & CDC_MULTI_SESSION)
return 0;
- buffer = (unsigned char *) kmalloc(512, GFP_KERNEL | GFP_DMA);
+ buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
if (!buffer)
return -ENOMEM;
struct st_modedef *STm;
struct st_partstat *STps;
char *name = tape_name(STp);
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int mode = TAPE_MODE(inode);
STp->ready = ST_READY;
NCR_PRINT(NDEBUG_INTR);
if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
done = 0;
- ENABLE_IRQ();
+// ENABLE_IRQ();
INT_PRINTK("scsi%d: SEL interrupt\n", HOSTNO);
NCR5380_reselect(instance);
(void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
INT_PRINTK("scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
NCR5380_dma_complete( instance );
done = 0;
- ENABLE_IRQ();
+// ENABLE_IRQ();
} else
#endif /* REAL_DMA */
{
#define REAL_DMA
#include "scsi.h"
+#include "initio.h"
#include <scsi/scsi_host.h>
#include "sun3_scsi.h"
-#include "NCR5380.h"
static void NCR5380_print(struct Scsi_Host *instance);
*
*/
-
+#include "NCR5380.h"
#if NDEBUG & NDEBUG_ARBITRATION
#define ARB_PRINTK(format, args...) \
#define REAL_DMA
#include "scsi.h"
+#include "initio.h"
#include <scsi/scsi_host.h>
#include "sun3_scsi.h"
-#include "NCR5380.h"
extern int sun3_map_test(unsigned long, char *);
/*
* Allocate the array of lists of CCBs hashed by DSA.
*/
- np->ccbh = kcalloc(sizeof(struct sym_ccb **), CCB_HASH_SIZE, GFP_KERNEL);
+ np->ccbh = kcalloc(CCB_HASH_SIZE, sizeof(struct sym_ccb **), GFP_KERNEL);
if (!np->ccbh)
goto attach_failed;
}
static void
-serial21285_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned long flags;
unsigned int baud, quot, h_lcr;
return 0;
}
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
/* FIX UP modem control here someday......
*/
-static void rs_360_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
ser_info_t *info = (ser_info_t *)tty->driver_data;
}
static void
-serial8250_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned char cval, fcr = 0;
pbn_b0_bt_1_460800 },
/*
+ * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
+ * Cards are identified by their subsystem vendor IDs, which
+ * (in hex) match the model number.
+ *
+ * Note that JC140x are RS422/485 cards which require ox950
+ * ACR = 0x10, and as such are not currently fully supported.
+ */
+ { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+ 0x1204, 0x0004, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+ 0x1208, 0x0004, 0, 0,
+ pbn_b0_4_921600 },
+/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+ 0x1402, 0x0002, 0, 0,
+ pbn_b0_2_921600 }, */
+/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
+ 0x1404, 0x0004, 0, 0,
+ pbn_b0_4_921600 }, */
+ { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
+ 0x1208, 0x0004, 0, 0,
+ pbn_b0_4_921600 },
+
+ /*
* Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
*/
{ PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
say N here to save some memory. You can also say Y if you have an
"intelligent" multiport card such as Cyclades, Digiboards, etc.
-config SERIAL_8250_SHARE_IRQ
- bool "Support for sharing serial interrupts"
- depends on SERIAL_8250_EXTENDED
- help
- Some serial boards have hardware support which allows multiple dumb
- serial ports on the same board to share a single IRQ. To enable
- support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
- bool "Autodetect IRQ on standard ports (unsafe)"
- depends on SERIAL_8250_EXTENDED
- help
- Say Y here if you want the kernel to try to guess which IRQ
- to use for your serial port.
-
- This is considered unsafe; it is far better to configure the IRQ in
- a boot script using the setserial command.
-
- If unsure, say N.
-
-config SERIAL_8250_RSA
- bool "Support RSA serial ports"
- depends on SERIAL_8250_EXTENDED
- help
- ::: To be written :::
-
#
# Multi-port serial cards
#
To compile this driver as a module, choose M here: the module
will be called 8250_accent.
-
config SERIAL_8250_BOCA
tristate "Support Boca cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
To compile this driver as a module, choose M here: the module
will be called 8250_hub6.
+config SERIAL_8250_SHARE_IRQ
+ bool "Support for sharing serial interrupts"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Some serial boards have hardware support which allows multiple dumb
+ serial ports on the same board to share a single IRQ. To enable
+ support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+ bool "Autodetect IRQ on standard ports (unsafe)"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Say Y here if you want the kernel to try to guess which IRQ
+ to use for your serial port.
+
+ This is considered unsafe; it is far better to configure the IRQ in
+ a boot script using the setserial command.
+
+ If unsure, say N.
+
+config SERIAL_8250_RSA
+ bool "Support RSA serial ports"
+ depends on SERIAL_8250_EXTENDED
+ help
+ ::: To be written :::
+
config SERIAL_8250_MCA
tristate "Support 8250-type ports on MCA buses"
depends on SERIAL_8250 != n && MCA
config V850E_UARTB
bool
- depends V850E_UART && V850E_ME2
+ depends on V850E_UART && V850E_ME2
default y
config V850E_UART_CONSOLE
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
- depends HAS_TXX9_SERIAL
+ depends on HAS_TXX9_SERIAL
select SERIAL_CORE
default y
}
static void
-pl010_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+pl010_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int lcr_h, old_cr;
unsigned long flags;
}
static void
-pl011_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int lcr_h, old_cr;
unsigned long flags;
/*
* Change the port parameters
*/
-static void atmel_set_termios(struct uart_port *port, struct termios * termios, struct termios * old)
+static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
{
unsigned long flags;
unsigned int mode, imr, quot, baud;
}
static void
-clps711xuart_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int ubrlcr, baud, quot;
unsigned long flags;
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-static struct termios *serial_termios[NR_PORTS];
-static struct termios *serial_termios_locked[NR_PORTS];
+static struct ktermios *serial_termios[NR_PORTS];
+static struct ktermios *serial_termios_locked[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
}
static void
-rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
driver->init_termios = tty_std_termios;
driver->init_termios.c_cflag =
B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+ driver->init_termios.c_ispeed = 115200;
+ driver->init_termios.c_ospeed = 115200;
driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
driver->termios = serial_termios;
driver->termios_locked = serial_termios_locked;
struct work_struct work;
struct async_icount icount; /* error-statistics etc.*/
- struct termios normal_termios;
- struct termios callout_termios;
+ struct ktermios normal_termios;
+ struct ktermios callout_termios;
#ifdef DECLARE_WAITQUEUE
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
spin_unlock_irqrestore(&uport->lock, flags);
}
-static void dz_set_termios(struct uart_port *uport, struct termios *termios,
- struct termios *old_termios)
+static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
+ struct ktermios *old_termios)
{
struct dz_port *dport = (struct dz_port *)uport;
unsigned long flags;
}
static void icom_set_termios(struct uart_port *port,
- struct termios *termios,
- struct termios *old_termios)
+ struct ktermios *termios,
+ struct ktermios *old_termios)
{
int baud;
unsigned cflag, iflag;
}
if ( (retval = pci_request_regions(dev, "icom"))) {
- dev_err(&dev->dev, "pci_request_region FAILED\n");
+ dev_err(&dev->dev, "pci_request_regions FAILED\n");
pci_disable_device(dev);
return retval;
}
}
static void
-imx_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+imx_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long flags;
*/
static void
ioc3_change_speed(struct uart_port *the_port,
- struct termios *new_termios, struct termios *old_termios)
+ struct ktermios *new_termios, struct ktermios *old_termios)
{
struct ioc3_port *port = get_ioc3_port(the_port);
unsigned int cflag;
*/
static void
ic3_set_termios(struct uart_port *the_port,
- struct termios *termios, struct termios *old_termios)
+ struct ktermios *termios, struct ktermios *old_termios)
{
unsigned long port_flags;
*/
static void
ioc4_change_speed(struct uart_port *the_port,
- struct termios *new_termios, struct termios *old_termios)
+ struct ktermios *new_termios, struct ktermios *old_termios)
{
struct ioc4_port *port = get_ioc4_port(the_port, 0);
int baud, bits;
ioc4_set_proto(port, the_port->mapbase);
/* set the speed of the serial port */
- ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
+ ioc4_change_speed(the_port, info->tty->termios, (struct ktermios *)0);
return 0;
}
*/
static void
ic4_set_termios(struct uart_port *the_port,
- struct termios *termios, struct termios *old_termios)
+ struct ktermios *termios, struct ktermios *old_termios)
{
unsigned long port_flags;
/* The port lock is not held. */
static void
-ip22zilog_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
unsigned long flags;
{
unsigned long lock_flags;
struct jsm_channel *channel = (struct jsm_channel *)port;
- struct termios *termios;
+ struct ktermios *termios;
spin_lock_irqsave(&port->lock, lock_flags);
termios = port->info->tty->termios;
struct jsm_board *brd;
int rc = 0;
struct jsm_channel *channel = (struct jsm_channel *)port;
- struct termios *termios;
+ struct ktermios *termios;
/* Get board pointer from our array of majors we have allocated */
brd = channel->ch_bd;
static void jsm_tty_close(struct uart_port *port)
{
struct jsm_board *bd;
- struct termios *ts;
+ struct ktermios *ts;
struct jsm_channel *channel = (struct jsm_channel *)port;
jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
}
static void jsm_tty_set_termios(struct uart_port *port,
- struct termios *termios,
- struct termios *old_termios)
+ struct ktermios *termios,
+ struct ktermios *old_termios)
{
unsigned long lock_flags;
struct jsm_channel *channel = (struct jsm_channel *)port;
}
static void m32r_sio_set_termios(struct uart_port *port,
- struct termios *termios, struct termios *old)
+ struct ktermios *termios, struct ktermios *old)
{
struct uart_sio_port *up = (struct uart_sio_port *)port;
unsigned char cval = 0;
return 0;
}
-static void mcfrs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
}
static void
-mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
- struct termios *old)
+mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
+ struct ktermios *old)
{
struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned long flags;
}
static void
-mpsc_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+mpsc_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
u32 baud;
* The Serial Mux does not support this function.
*/
static void
-mux_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+mux_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
}
}
static void
-netx_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+netx_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int baud, quot;
unsigned char old_cr;
}
-static void __pmz_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_pmac_port *uap = to_pmz(port);
unsigned long baud;
if (ZS_IS_ASLEEP(uap))
return;
- memcpy(&uap->termios_cache, termios, sizeof(struct termios));
+ memcpy(&uap->termios_cache, termios, sizeof(struct ktermios));
/* XXX Check which revs of machines actually allow 1 and 4Mb speeds
* on the IR dongle. Note that the IRTTY driver currently doesn't know
}
/* The port lock is not held. */
-static void pmz_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_pmac_port *uap = to_pmz(port);
unsigned long flags;
volatile struct dbdma_regs __iomem *tx_dma_regs;
volatile struct dbdma_regs __iomem *rx_dma_regs;
- struct termios termios_cache;
+ struct ktermios termios_cache;
};
#define to_pmz(p) ((struct uart_pmac_port *)(p))
}
static void
-serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
unsigned char cval, fcr = 0;
}
static void s3c24xx_serial_set_termios(struct uart_port *port,
- struct termios *termios,
- struct termios *old)
+ struct ktermios *termios,
+ struct ktermios *old)
{
struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
struct s3c24xx_uart_port *ourport = to_ourport(port);
}
static void
-sa1100_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct sa1100_port *sport = (struct sa1100_port *)port;
unsigned long flags;
#define uart_console(port) (0)
#endif
-static void uart_change_speed(struct uart_state *state, struct termios *old_termios);
+static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state, int pm_state);
* we're actually going to be using.
*/
unsigned int
-uart_get_baud_rate(struct uart_port *port, struct termios *termios,
- struct termios *old, unsigned int min, unsigned int max)
+uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old, unsigned int min, unsigned int max)
{
unsigned int try, baud, altbaud = 38400;
upf_t flags = port->flags & UPF_SPD_MASK;
EXPORT_SYMBOL(uart_get_divisor);
static void
-uart_change_speed(struct uart_state *state, struct termios *old_termios)
+uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
{
struct tty_struct *tty = state->info->tty;
struct uart_port *port = state->port;
- struct termios *termios;
+ struct ktermios *termios;
/*
* If we have no tty, termios, or the port does not exist,
return ret;
}
-static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct uart_state *state = tty->driver_data;
unsigned long flags;
uart_set_options(struct uart_port *port, struct console *co,
int baud, int parity, int bits, int flow)
{
- struct termios termios;
+ struct ktermios termios;
int i;
/*
spin_lock_init(&port->lock);
lockdep_set_class(&port->lock, &port_lock_key);
- memset(&termios, 0, sizeof(struct termios));
+ memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = CREAD | HUPCL | CLOCAL;
* Re-enable the console device after suspending.
*/
if (uart_console(port)) {
- struct termios termios;
+ struct ktermios termios;
/*
* First try to use the console cflag setting.
*/
- memset(&termios, 0, sizeof(struct termios));
+ memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = port->cons->cflag;
/*
normal->subtype = SERIAL_TYPE_NORMAL;
normal->init_termios = tty_std_termios;
normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600;
normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
normal->driver_state = drv;
tty_set_operations(normal, &uart_ops);
}
static void lh7a40xuart_set_termios (struct uart_port* port,
- struct termios* termios,
- struct termios* old)
+ struct ktermios* termios,
+ struct ktermios* old)
{
unsigned int con;
unsigned int inten;
}
static void
-serial_txx9_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_txx9_port *up = (struct uart_txx9_port *)port;
unsigned int cval, fcr = 0;
sci_out(port, SCFCR, fcr_val);
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+ unsigned int fcr_val = 0;
+
+ if (cflag & CRTSCTS) {
+ fcr_val |= SCFCR_MCE;
+
+ ctrl_outw(0x0000, PORT_PSCR);
+ } else {
+ unsigned short data;
+
+ data = ctrl_inw(PORT_PSCR);
+ data &= 0x033f;
+ data |= 0x0400;
+ ctrl_outw(data, PORT_PSCR);
+
+ ctrl_outw(ctrl_inw(SCSPTR0) & 0x17, SCSPTR0);
+ }
+
+ sci_out(port, SCFCR, fcr_val);
+}
#else
/* For SH7750 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
s->disable(port);
}
-static void sci_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct sci_port *s = &sci_ports[port->line];
unsigned int status, baud, smr_val;
# define SCSPTR3 0xffe30010 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
+# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
+# define SCSPTR0 SCPDR0
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+# define PORT_PSCR 0xA405011E
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfe620000)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffe00000)
+ return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
static inline int sci_rxd_in(struct uart_port *port)
{
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xff925000)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffe10000)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffe9800)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+ return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xf8420000)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return 1;
}
#endif
*
*/
static void
-snp_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+snp_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
}
}
/* port->lock is not held. */
-static void sunhv_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
unsigned int quot = uart_get_divisor(port, baud);
}
/* port->lock is not held. */
-static void sunsab_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
unsigned long flags;
}
static void
-sunsu_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int baud, quot;
/* The port lock is not held. */
static void
-sunzilog_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+sunzilog_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
unsigned long flags;
free_irq(port->irq, port);
}
-static void ulite_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned long flags;
unsigned int baud;
}
static void
-v850e_uart_set_termios (struct uart_port *port, struct termios *termios,
- struct termios *old)
+v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned cflags = termios->c_cflag;
free_irq(port->irq, port);
}
-static void siu_set_termios(struct uart_port *port, struct termios *new,
- struct termios *old)
+static void siu_set_termios(struct uart_port *port, struct ktermios *new,
+ struct ktermios *old)
{
tcflag_t c_cflag, c_iflag;
uint8_t lcr, fcr, ier;
#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+/* for testing SSCR1 changes that require SSP restart, basically
+ * everything except the service and interrupt enables */
+#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_EBCEI | SSCR1_SCFR \
+ | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
+ | SSCR1_RWOT | SSCR1_TRAIL | SSCR1_PINTE \
+ | SSCR1_STRF | SSCR1_EFWR |SSCR1_RFT \
+ | SSCR1_TFT | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
+
#define DEFINE_SSP_REG(reg, off) \
static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \
static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); }
u8 n_bytes;
u32 dma_width;
int cs_change;
- void (*write)(struct driver_data *drv_data);
- void (*read)(struct driver_data *drv_data);
+ int (*write)(struct driver_data *drv_data);
+ int (*read)(struct driver_data *drv_data);
irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
void (*cs_control)(u32 command);
};
struct chip_data {
u32 cr0;
u32 cr1;
- u32 to;
u32 psp;
u32 timeout;
u8 n_bytes;
u8 enable_dma;
u8 bits_per_word;
u32 speed_hz;
- void (*write)(struct driver_data *drv_data);
- void (*read)(struct driver_data *drv_data);
+ int (*write)(struct driver_data *drv_data);
+ int (*read)(struct driver_data *drv_data);
void (*cs_control)(u32 command);
};
return limit;
}
-static void restore_state(struct driver_data *drv_data)
-{
- void *reg = drv_data->ioaddr;
-
- /* Clear status and disable clock */
- write_SSSR(drv_data->clear_sr, reg);
- write_SSCR0(drv_data->cur_chip->cr0 & ~SSCR0_SSE, reg);
-
- /* Load the registers */
- write_SSCR1(drv_data->cur_chip->cr1, reg);
- write_SSCR0(drv_data->cur_chip->cr0, reg);
- if (drv_data->ssp_type != PXA25x_SSP) {
- write_SSTO(0, reg);
- write_SSPSP(drv_data->cur_chip->psp, reg);
- }
-}
-
static void null_cs_control(u32 command)
{
}
-static void null_writer(struct driver_data *drv_data)
+static int null_writer(struct driver_data *drv_data)
{
void *reg = drv_data->ioaddr;
u8 n_bytes = drv_data->n_bytes;
- while ((read_SSSR(reg) & SSSR_TNF)
- && (drv_data->tx < drv_data->tx_end)) {
- write_SSDR(0, reg);
- drv_data->tx += n_bytes;
- }
+ if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+ || (drv_data->tx == drv_data->tx_end))
+ return 0;
+
+ write_SSDR(0, reg);
+ drv_data->tx += n_bytes;
+
+ return 1;
}
-static void null_reader(struct driver_data *drv_data)
+static int null_reader(struct driver_data *drv_data)
{
void *reg = drv_data->ioaddr;
u8 n_bytes = drv_data->n_bytes;
while ((read_SSSR(reg) & SSSR_RNE)
- && (drv_data->rx < drv_data->rx_end)) {
+ && (drv_data->rx < drv_data->rx_end)) {
read_SSDR(reg);
drv_data->rx += n_bytes;
}
+
+ return drv_data->rx == drv_data->rx_end;
}
-static void u8_writer(struct driver_data *drv_data)
+static int u8_writer(struct driver_data *drv_data)
{
void *reg = drv_data->ioaddr;
- while ((read_SSSR(reg) & SSSR_TNF)
- && (drv_data->tx < drv_data->tx_end)) {
- write_SSDR(*(u8 *)(drv_data->tx), reg);
- ++drv_data->tx;
- }
+ if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+ || (drv_data->tx == drv_data->tx_end))
+ return 0;
+
+ write_SSDR(*(u8 *)(drv_data->tx), reg);
+ ++drv_data->tx;
+
+ return 1;
}
-static void u8_reader(struct driver_data *drv_data)
+static int u8_reader(struct driver_data *drv_data)
{
void *reg = drv_data->ioaddr;
while ((read_SSSR(reg) & SSSR_RNE)
- && (drv_data->rx < drv_data->rx_end)) {
+ && (drv_data->rx < drv_data->rx_end)) {
*(u8 *)(drv_data->rx) = read_SSDR(reg);
++drv_data->rx;
}
+
+ return drv_data->rx == drv_data->rx_end;
}
-static void u16_writer(struct driver_data *drv_data)
+static int u16_writer(struct driver_data *drv_data)
{
void *reg = drv_data->ioaddr;
- while ((read_SSSR(reg) & SSSR_TNF)
- && (drv_data->tx < drv_data->tx_end)) {
- write_SSDR(*(u16 *)(drv_data->tx), reg);
- drv_data->tx += 2;
- }
+ if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+ || (drv_data->tx == drv_data->tx_end))
+ return 0;
+
+ write_SSDR(*(u16 *)(drv_data->tx), reg);
+ drv_data->tx += 2;
+
+ return 1;
}
-static void u16_reader(struct driver_data *drv_data)
+static int u16_reader(struct driver_data *drv_data)
{
void *reg = drv_data->ioaddr;
while ((read_SSSR(reg) & SSSR_RNE)
- && (drv_data->rx < drv_data->rx_end)) {
+ && (drv_data->rx < drv_data->rx_end)) {
*(u16 *)(drv_data->rx) = read_SSDR(reg);
drv_data->rx += 2;
}
+
+ return drv_data->rx == drv_data->rx_end;
}
-static void u32_writer(struct driver_data *drv_data)
+
+static int u32_writer(struct driver_data *drv_data)
{
void *reg = drv_data->ioaddr;
- while ((read_SSSR(reg) & SSSR_TNF)
- && (drv_data->tx < drv_data->tx_end)) {
- write_SSDR(*(u32 *)(drv_data->tx), reg);
- drv_data->tx += 4;
- }
+ if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+ || (drv_data->tx == drv_data->tx_end))
+ return 0;
+
+ write_SSDR(*(u32 *)(drv_data->tx), reg);
+ drv_data->tx += 4;
+
+ return 1;
}
-static void u32_reader(struct driver_data *drv_data)
+static int u32_reader(struct driver_data *drv_data)
{
void *reg = drv_data->ioaddr;
while ((read_SSSR(reg) & SSSR_RNE)
- && (drv_data->rx < drv_data->rx_end)) {
+ && (drv_data->rx < drv_data->rx_end)) {
*(u32 *)(drv_data->rx) = read_SSDR(reg);
drv_data->rx += 4;
}
+
+ return drv_data->rx == drv_data->rx_end;
}
static void *next_transfer(struct driver_data *drv_data)
return limit;
}
-static void dma_handler(int channel, void *data)
+void dma_error_stop(struct driver_data *drv_data, const char *msg)
{
- struct driver_data *drv_data = data;
- struct spi_message *msg = drv_data->cur_msg;
void *reg = drv_data->ioaddr;
- u32 irq_status = DCSR(channel) & DMA_INT_MASK;
- u32 trailing_sssr = 0;
- if (irq_status & DCSR_BUSERR) {
+ /* Stop and reset */
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
+ flush(drv_data);
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
- /* Disable interrupts, clear status and reset DMA */
- write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
- if (drv_data->ssp_type != PXA25x_SSP)
- write_SSTO(0, reg);
- write_SSSR(drv_data->clear_sr, reg);
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ unmap_dma_buffers(drv_data);
- if (flush(drv_data) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_handler: flush fail\n");
+ dev_err(&drv_data->pdev->dev, "%s\n", msg);
- unmap_dma_buffers(drv_data);
+ drv_data->cur_msg->state = ERROR_STATE;
+ tasklet_schedule(&drv_data->pump_transfers);
+}
+
+static void dma_transfer_complete(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
+ struct spi_message *msg = drv_data->cur_msg;
+
+ /* Clear and disable interrupts on SSP and DMA channels*/
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ write_SSSR(drv_data->clear_sr, reg);
+ DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+
+ if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_handler: dma rx channel stop failed\n");
+
+ if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+ dev_err(&drv_data->pdev->dev,
+ "dma_transfer: ssp rx stall failed\n");
+
+ unmap_dma_buffers(drv_data);
+
+ /* update the buffer pointer for the amount completed in dma */
+ drv_data->rx += drv_data->len -
+ (DCMD(drv_data->rx_channel) & DCMD_LENGTH);
+
+ /* read trailing data from fifo, it does not matter how many
+ * bytes are in the fifo just read until buffer is full
+ * or fifo is empty, which ever occurs first */
+ drv_data->read(drv_data);
+
+ /* return count of what was actually read */
+ msg->actual_length += drv_data->len -
+ (drv_data->rx_end - drv_data->rx);
+
+ /* Release chip select if requested, transfer delays are
+ * handled in pump_transfers */
+ if (drv_data->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+ /* Move to next transfer */
+ msg->state = next_transfer(drv_data);
+
+ /* Schedule transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+}
+
+static void dma_handler(int channel, void *data)
+{
+ struct driver_data *drv_data = data;
+ u32 irq_status = DCSR(channel) & DMA_INT_MASK;
+
+ if (irq_status & DCSR_BUSERR) {
if (channel == drv_data->tx_channel)
- dev_err(&drv_data->pdev->dev,
- "dma_handler: bad bus address on "
- "tx channel %d, source %x target = %x\n",
- channel, DSADR(channel), DTADR(channel));
+ dma_error_stop(drv_data,
+ "dma_handler: "
+ "bad bus address on tx channel");
else
- dev_err(&drv_data->pdev->dev,
- "dma_handler: bad bus address on "
- "rx channel %d, source %x target = %x\n",
- channel, DSADR(channel), DTADR(channel));
-
- msg->state = ERROR_STATE;
- tasklet_schedule(&drv_data->pump_transfers);
+ dma_error_stop(drv_data,
+ "dma_handler: "
+ "bad bus address on rx channel");
+ return;
}
/* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
- if ((drv_data->ssp_type == PXA25x_SSP)
- && (channel == drv_data->tx_channel)
- && (irq_status & DCSR_ENDINTR)) {
+ if ((channel == drv_data->tx_channel)
+ && (irq_status & DCSR_ENDINTR)
+ && (drv_data->ssp_type == PXA25x_SSP)) {
/* Wait for rx to stall */
if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
dev_err(&drv_data->pdev->dev,
"dma_handler: ssp rx stall failed\n");
- /* Clear and disable interrupts on SSP and DMA channels*/
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
- write_SSSR(drv_data->clear_sr, reg);
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
- if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_handler: dma rx channel stop failed\n");
-
- unmap_dma_buffers(drv_data);
-
- /* Read trailing bytes */
- /* Calculate number of trailing bytes, read them */
- trailing_sssr = read_SSSR(reg);
- if ((trailing_sssr & 0xf008) != 0xf000) {
- drv_data->rx = drv_data->rx_end -
- (((trailing_sssr >> 12) & 0x0f) + 1);
- drv_data->read(drv_data);
- }
- msg->actual_length += drv_data->len;
-
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
-
- /* Move to next transfer */
- msg->state = next_transfer(drv_data);
-
- /* Schedule transfer tasklet */
- tasklet_schedule(&drv_data->pump_transfers);
+ /* finish this transfer, start the next */
+ dma_transfer_complete(drv_data);
}
}
static irqreturn_t dma_transfer(struct driver_data *drv_data)
{
u32 irq_status;
- u32 trailing_sssr = 0;
- struct spi_message *msg = drv_data->cur_msg;
void *reg = drv_data->ioaddr;
irq_status = read_SSSR(reg) & drv_data->mask_sr;
if (irq_status & SSSR_ROR) {
- /* Clear and disable interrupts on SSP and DMA channels*/
- write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
- if (drv_data->ssp_type != PXA25x_SSP)
- write_SSTO(0, reg);
- write_SSSR(drv_data->clear_sr, reg);
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
- unmap_dma_buffers(drv_data);
-
- if (flush(drv_data) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_transfer: flush fail\n");
-
- dev_warn(&drv_data->pdev->dev, "dma_transfer: fifo overun\n");
-
- drv_data->cur_msg->state = ERROR_STATE;
- tasklet_schedule(&drv_data->pump_transfers);
-
+ dma_error_stop(drv_data, "dma_transfer: fifo overrun");
return IRQ_HANDLED;
}
/* Check for false positive timeout */
- if ((irq_status & SSSR_TINT) && DCSR(drv_data->tx_channel) & DCSR_RUN) {
+ if ((irq_status & SSSR_TINT)
+ && (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
write_SSSR(SSSR_TINT, reg);
return IRQ_HANDLED;
}
if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
- /* Clear and disable interrupts on SSP and DMA channels*/
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ /* Clear and disable timeout interrupt, do the rest in
+ * dma_transfer_complete */
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
- write_SSSR(drv_data->clear_sr, reg);
- DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
- DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
- if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_transfer: dma rx channel stop failed\n");
-
- if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
- dev_err(&drv_data->pdev->dev,
- "dma_transfer: ssp rx stall failed\n");
-
- unmap_dma_buffers(drv_data);
-
- /* Calculate number of trailing bytes, read them */
- trailing_sssr = read_SSSR(reg);
- if ((trailing_sssr & 0xf008) != 0xf000) {
- drv_data->rx = drv_data->rx_end -
- (((trailing_sssr >> 12) & 0x0f) + 1);
- drv_data->read(drv_data);
- }
- msg->actual_length += drv_data->len;
-
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
-
- /* Move to next transfer */
- msg->state = next_transfer(drv_data);
-
- /* Schedule transfer tasklet */
- tasklet_schedule(&drv_data->pump_transfers);
+ /* finish this transfer, start the next */
+ dma_transfer_complete(drv_data);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
-static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
+static void int_error_stop(struct driver_data *drv_data, const char* msg)
{
- struct spi_message *msg = drv_data->cur_msg;
void *reg = drv_data->ioaddr;
- unsigned long limit = loops_per_jiffy << 1;
- u32 irq_status;
- u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
- drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
-
- while ((irq_status = read_SSSR(reg) & irq_mask)) {
-
- if (irq_status & SSSR_ROR) {
- /* Clear and disable interrupts */
- write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
- if (drv_data->ssp_type != PXA25x_SSP)
- write_SSTO(0, reg);
- write_SSSR(drv_data->clear_sr, reg);
+ /* Stop and reset SSP */
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
+ flush(drv_data);
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
- if (flush(drv_data) == 0)
- dev_err(&drv_data->pdev->dev,
- "interrupt_transfer: flush fail\n");
+ dev_err(&drv_data->pdev->dev, "%s\n", msg);
- /* Stop the SSP */
+ drv_data->cur_msg->state = ERROR_STATE;
+ tasklet_schedule(&drv_data->pump_transfers);
+}
- dev_warn(&drv_data->pdev->dev,
- "interrupt_transfer: fifo overun\n");
+static void int_transfer_complete(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
- msg->state = ERROR_STATE;
- tasklet_schedule(&drv_data->pump_transfers);
+ /* Stop SSP */
+ write_SSSR(drv_data->clear_sr, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
- return IRQ_HANDLED;
- }
+ /* Update total byte transfered return count actual bytes read */
+ drv_data->cur_msg->actual_length += drv_data->len -
+ (drv_data->rx_end - drv_data->rx);
- /* Look for false positive timeout */
- if ((irq_status & SSSR_TINT)
- && (drv_data->rx < drv_data->rx_end))
- write_SSSR(SSSR_TINT, reg);
+ /* Release chip select if requested, transfer delays are
+ * handled in pump_transfers */
+ if (drv_data->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
- /* Pump data */
- drv_data->read(drv_data);
- drv_data->write(drv_data);
+ /* Move to next transfer */
+ drv_data->cur_msg->state = next_transfer(drv_data);
- if (drv_data->tx == drv_data->tx_end) {
- /* Disable tx interrupt */
- write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
- irq_mask = drv_data->mask_sr & ~SSSR_TFS;
+ /* Schedule transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+}
- /* PXA25x_SSP has no timeout, read trailing bytes */
- if (drv_data->ssp_type == PXA25x_SSP) {
- while ((read_SSSR(reg) & SSSR_BSY) && limit--)
- drv_data->read(drv_data);
+static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
+{
+ void *reg = drv_data->ioaddr;
- if (limit == 0)
- dev_err(&drv_data->pdev->dev,
- "interrupt_transfer: "
- "trailing byte read failed\n");
- }
- }
+ u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
+ drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
- if ((irq_status & SSSR_TINT)
- || (drv_data->rx == drv_data->rx_end)) {
+ u32 irq_status = read_SSSR(reg) & irq_mask;
- /* Clear timeout */
- write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
- if (drv_data->ssp_type != PXA25x_SSP)
- write_SSTO(0, reg);
- write_SSSR(drv_data->clear_sr, reg);
+ if (irq_status & SSSR_ROR) {
+ int_error_stop(drv_data, "interrupt_transfer: fifo overrun");
+ return IRQ_HANDLED;
+ }
- /* Update total byte transfered */
- msg->actual_length += drv_data->len;
+ if (irq_status & SSSR_TINT) {
+ write_SSSR(SSSR_TINT, reg);
+ if (drv_data->read(drv_data)) {
+ int_transfer_complete(drv_data);
+ return IRQ_HANDLED;
+ }
+ }
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Drain rx fifo, Fill tx fifo and prevent overruns */
+ do {
+ if (drv_data->read(drv_data)) {
+ int_transfer_complete(drv_data);
+ return IRQ_HANDLED;
+ }
+ } while (drv_data->write(drv_data));
- /* Move to next transfer */
- msg->state = next_transfer(drv_data);
+ if (drv_data->read(drv_data)) {
+ int_transfer_complete(drv_data);
+ return IRQ_HANDLED;
+ }
- /* Schedule transfer tasklet */
- tasklet_schedule(&drv_data->pump_transfers);
+ if (drv_data->tx == drv_data->tx_end) {
+ write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
+ /* PXA25x_SSP has no timeout, read trailing bytes */
+ if (drv_data->ssp_type == PXA25x_SSP) {
+ if (!wait_ssp_rx_stall(reg))
+ {
+ int_error_stop(drv_data, "interrupt_transfer: "
+ "rx stall failed");
+ return IRQ_HANDLED;
+ }
+ if (!drv_data->read(drv_data))
+ {
+ int_error_stop(drv_data,
+ "interrupt_transfer: "
+ "trailing byte read failed");
+ return IRQ_HANDLED;
+ }
+ int_transfer_complete(drv_data);
}
}
write_SSSR(drv_data->clear_sr, reg);
dev_err(&drv_data->pdev->dev, "bad message state "
- "in interrupt handler");
+ "in interrupt handler\n");
/* Never fail */
return IRQ_HANDLED;
return drv_data->transfer_handler(drv_data);
}
+int set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi,
+ u8 bits_per_word, u32 *burst_code,
+ u32 *threshold)
+{
+ struct pxa2xx_spi_chip *chip_info =
+ (struct pxa2xx_spi_chip *)spi->controller_data;
+ int bytes_per_word;
+ int burst_bytes;
+ int thresh_words;
+ int req_burst_size;
+ int retval = 0;
+
+ /* Set the threshold (in registers) to equal the same amount of data
+ * as represented by burst size (in bytes). The computation below
+ * is (burst_size rounded up to nearest 8 byte, word or long word)
+ * divided by (bytes/register); the tx threshold is the inverse of
+ * the rx, so that there will always be enough data in the rx fifo
+ * to satisfy a burst, and there will always be enough space in the
+ * tx fifo to accept a burst (a tx burst will overwrite the fifo if
+ * there is not enough space), there must always remain enough empty
+ * space in the rx fifo for any data loaded to the tx fifo.
+ * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
+ * will be 8, or half the fifo;
+ * The threshold can only be set to 2, 4 or 8, but not 16, because
+ * to burst 16 to the tx fifo, the fifo would have to be empty;
+ * however, the minimum fifo trigger level is 1, and the tx will
+ * request service when the fifo is at this level, with only 15 spaces.
+ */
+
+ /* find bytes/word */
+ if (bits_per_word <= 8)
+ bytes_per_word = 1;
+ else if (bits_per_word <= 16)
+ bytes_per_word = 2;
+ else
+ bytes_per_word = 4;
+
+ /* use struct pxa2xx_spi_chip->dma_burst_size if available */
+ if (chip_info)
+ req_burst_size = chip_info->dma_burst_size;
+ else {
+ switch (chip->dma_burst_size) {
+ default:
+ /* if the default burst size is not set,
+ * do it now */
+ chip->dma_burst_size = DCMD_BURST8;
+ case DCMD_BURST8:
+ req_burst_size = 8;
+ break;
+ case DCMD_BURST16:
+ req_burst_size = 16;
+ break;
+ case DCMD_BURST32:
+ req_burst_size = 32;
+ break;
+ }
+ }
+ if (req_burst_size <= 8) {
+ *burst_code = DCMD_BURST8;
+ burst_bytes = 8;
+ } else if (req_burst_size <= 16) {
+ if (bytes_per_word == 1) {
+ /* don't burst more than 1/2 the fifo */
+ *burst_code = DCMD_BURST8;
+ burst_bytes = 8;
+ retval = 1;
+ } else {
+ *burst_code = DCMD_BURST16;
+ burst_bytes = 16;
+ }
+ } else {
+ if (bytes_per_word == 1) {
+ /* don't burst more than 1/2 the fifo */
+ *burst_code = DCMD_BURST8;
+ burst_bytes = 8;
+ retval = 1;
+ } else if (bytes_per_word == 2) {
+ /* don't burst more than 1/2 the fifo */
+ *burst_code = DCMD_BURST16;
+ burst_bytes = 16;
+ retval = 1;
+ } else {
+ *burst_code = DCMD_BURST32;
+ burst_bytes = 32;
+ }
+ }
+
+ thresh_words = burst_bytes / bytes_per_word;
+
+ /* thresh_words will be between 2 and 8 */
+ *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
+ | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
+
+ return retval;
+}
+
static void pump_transfers(unsigned long data)
{
struct driver_data *drv_data = (struct driver_data *)data;
u8 bits = 0;
u32 speed = 0;
u32 cr0;
+ u32 cr1;
+ u32 dma_thresh = drv_data->cur_chip->dma_threshold;
+ u32 dma_burst = drv_data->cur_chip->dma_burst_size;
/* Get current state information */
message = drv_data->cur_msg;
udelay(previous->delay_usecs);
}
+ /* Check transfer length */
+ if (transfer->len > 8191)
+ {
+ dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
+ "length greater than 8191\n");
+ message->status = -EINVAL;
+ giveback(drv_data);
+ return;
+ }
+
/* Setup the transfer state based on the type of transfer */
if (flush(drv_data) == 0) {
dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
drv_data->rx_end = drv_data->rx + transfer->len;
drv_data->rx_dma = transfer->rx_dma;
drv_data->tx_dma = transfer->tx_dma;
- drv_data->len = transfer->len;
+ drv_data->len = transfer->len & DCMD_LENGTH;
drv_data->write = drv_data->tx ? chip->write : null_writer;
drv_data->read = drv_data->rx ? chip->read : null_reader;
drv_data->cs_change = transfer->cs_change;
/* Change speed and bit per word on a per transfer */
+ cr0 = chip->cr0;
if (transfer->speed_hz || transfer->bits_per_word) {
- /* Disable clock */
- write_SSCR0(chip->cr0 & ~SSCR0_SSE, reg);
- cr0 = chip->cr0;
bits = chip->bits_per_word;
speed = chip->speed_hz;
drv_data->write = drv_data->write != null_writer ?
u32_writer : null_writer;
}
+ /* if bits/word is changed in dma mode, then must check the
+ * thresholds and burst also */
+ if (chip->enable_dma) {
+ if (set_dma_burst_and_threshold(chip, message->spi,
+ bits, &dma_burst,
+ &dma_thresh))
+ if (printk_ratelimit())
+ dev_warn(&message->spi->dev,
+ "pump_transfer: "
+ "DMA burst size reduced to "
+ "match bits_per_word\n");
+ }
cr0 = clk_div
| SSCR0_Motorola
| SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
| SSCR0_SSE
| (bits > 16 ? SSCR0_EDSS : 0);
-
- /* Start it back up */
- write_SSCR0(cr0, reg);
}
message->state = RUNNING_STATE;
/* No target address increment */
DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
| drv_data->dma_width
- | chip->dma_burst_size
+ | dma_burst
| drv_data->len;
else
DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
| DCMD_FLOWSRC
| drv_data->dma_width
- | chip->dma_burst_size
+ | dma_burst
| drv_data->len;
/* Setup tx DMA Channel */
/* No source address increment */
DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
| drv_data->dma_width
- | chip->dma_burst_size
+ | dma_burst
| drv_data->len;
else
DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
| DCMD_FLOWTRG
| drv_data->dma_width
- | chip->dma_burst_size
+ | dma_burst
| drv_data->len;
/* Enable dma end irqs on SSP to detect end of transfer */
/* Fix me, need to handle cs polarity */
drv_data->cs_control(PXA2XX_CS_ASSERT);
- /* Go baby, go */
+ /* Clear status and start DMA engine */
+ cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
write_SSSR(drv_data->clear_sr, reg);
DCSR(drv_data->rx_channel) |= DCSR_RUN;
DCSR(drv_data->tx_channel) |= DCSR_RUN;
- if (drv_data->ssp_type != PXA25x_SSP)
- write_SSTO(chip->timeout, reg);
- write_SSCR1(chip->cr1
- | chip->dma_threshold
- | drv_data->dma_cr1,
- reg);
} else {
/* Ensure we have the correct interrupt handler */
drv_data->transfer_handler = interrupt_transfer;
/* Fix me, need to handle cs polarity */
drv_data->cs_control(PXA2XX_CS_ASSERT);
- /* Go baby, go */
+ /* Clear status */
+ cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
write_SSSR(drv_data->clear_sr, reg);
+ }
+
+ /* see if we need to reload the config registers */
+ if ((read_SSCR0(reg) != cr0)
+ || (read_SSCR1(reg) & SSCR1_CHANGE_MASK) !=
+ (cr1 & SSCR1_CHANGE_MASK)) {
+
+ write_SSCR0(cr0 & ~SSCR0_SSE, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(chip->timeout, reg);
- write_SSCR1(chip->cr1
- | chip->threshold
- | drv_data->int_cr1,
- reg);
+ write_SSCR1(cr1, reg);
+ write_SSCR0(cr0, reg);
+ } else {
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(chip->timeout, reg);
+ write_SSCR1(cr1, reg);
}
}
struct spi_transfer,
transfer_list);
- /* Setup the SSP using the per chip configuration */
+ /* prepare to setup the SSP, in pump_transfers, using the per
+ * chip configuration */
drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
- restore_state(drv_data);
/* Mark as busy and launch transfers */
tasklet_schedule(&drv_data->pump_transfers);
spi->bits_per_word = 8;
if (drv_data->ssp_type != PXA25x_SSP
- && (spi->bits_per_word < 4 || spi->bits_per_word > 32))
+ && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) {
+ dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
+ "b/w not 4-32 for type non-PXA25x_SSP\n",
+ drv_data->ssp_type, spi->bits_per_word);
return -EINVAL;
- else if (spi->bits_per_word < 4 || spi->bits_per_word > 16)
+ }
+ else if (drv_data->ssp_type == PXA25x_SSP
+ && (spi->bits_per_word < 4
+ || spi->bits_per_word > 16)) {
+ dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
+ "b/w not 4-16 for type PXA25x_SSP\n",
+ drv_data->ssp_type, spi->bits_per_word);
return -EINVAL;
+ }
- /* Only alloc (or use chip_info) on first setup */
+ /* Only alloc on first setup */
chip = spi_get_ctldata(spi);
- if (chip == NULL) {
+ if (!chip) {
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
- if (!chip)
+ if (!chip) {
+ dev_err(&spi->dev,
+ "failed setup: can't allocate chip data\n");
return -ENOMEM;
+ }
chip->cs_control = null_cs_control;
chip->enable_dma = 0;
- chip->timeout = SSP_TIMEOUT(1000);
+ chip->timeout = 1000;
chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
chip->dma_burst_size = drv_data->master_info->enable_dma ?
DCMD_BURST8 : 0;
-
- chip_info = spi->controller_data;
}
+ /* protocol drivers may change the chip settings, so...
+ * if chip_info exists, use it */
+ chip_info = spi->controller_data;
+
/* chip_info isn't always needed */
+ chip->cr1 = 0;
if (chip_info) {
if (chip_info->cs_control)
chip->cs_control = chip_info->cs_control;
- chip->timeout = SSP_TIMEOUT(chip_info->timeout_microsecs);
+ chip->timeout = chip_info->timeout;
- chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold)
- | SSCR1_TxTresh(chip_info->tx_threshold);
+ chip->threshold = (SSCR1_RxTresh(chip_info->rx_threshold) &
+ SSCR1_RFT) |
+ (SSCR1_TxTresh(chip_info->tx_threshold) &
+ SSCR1_TFT);
chip->enable_dma = chip_info->dma_burst_size != 0
&& drv_data->master_info->enable_dma;
chip->dma_threshold = 0;
- if (chip->enable_dma) {
- if (chip_info->dma_burst_size <= 8) {
- chip->dma_threshold = SSCR1_RxTresh(8)
- | SSCR1_TxTresh(8);
- chip->dma_burst_size = DCMD_BURST8;
- } else if (chip_info->dma_burst_size <= 16) {
- chip->dma_threshold = SSCR1_RxTresh(16)
- | SSCR1_TxTresh(16);
- chip->dma_burst_size = DCMD_BURST16;
- } else {
- chip->dma_threshold = SSCR1_RxTresh(32)
- | SSCR1_TxTresh(32);
- chip->dma_burst_size = DCMD_BURST32;
- }
- }
-
-
if (chip_info->enable_loopback)
chip->cr1 = SSCR1_LBM;
}
+ /* set dma burst and threshold outside of chip_info path so that if
+ * chip_info goes away after setting chip->enable_dma, the
+ * burst and threshold can still respond to changes in bits_per_word */
+ if (chip->enable_dma) {
+ /* set up legal burst and threshold for dma */
+ if (set_dma_burst_and_threshold(chip, spi, spi->bits_per_word,
+ &chip->dma_burst_size,
+ &chip->dma_threshold)) {
+ dev_warn(&spi->dev, "in setup: DMA burst size reduced "
+ "to match bits_per_word\n");
+ }
+ }
+
if (drv_data->ioaddr == SSP1_VIRT)
clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
else if (drv_data->ioaddr == SSP2_VIRT)
else if (drv_data->ioaddr == SSP3_VIRT)
clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
else
+ {
+ dev_err(&spi->dev, "failed setup: unknown IO address=0x%p\n",
+ drv_data->ioaddr);
return -ENODEV;
+ }
chip->speed_hz = spi->max_speed_hz;
chip->cr0 = clk_div
chip->write = u32_writer;
} else {
dev_err(&spi->dev, "invalid wordsize\n");
- kfree(chip);
return -ENODEV;
}
chip->bits_per_word = spi->bits_per_word;
int status;
status = stop_queue(drv_data);
+ /* we are unloading the module or failing to load (only two calls
+ * to this routine), and neither call can handle a return value.
+ * However, destroy_workqueue calls flush_workqueue, and that will
+ * block until all work is done. If the reason that stop_queue
+ * timed out is that the work will never finish, then it does no
+ * good to call destroy_workqueue, so return anyway. */
if (status != 0)
return status;
/* Remove the queue */
status = destroy_queue(drv_data);
if (status != 0)
- return status;
+ /* the kernel does not check the return status of this
+ * this routine (mod->exit, within the kernel). Therefore
+ * nothing is gained by returning from here, the module is
+ * going away regardless, and we should not leave any more
+ * resources allocated than necessary. We cannot free the
+ * message memory in drv_data->queue, but we can release the
+ * resources below. I think the kernel should honor -EBUSY
+ * returns but... */
+ dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not "
+ "complete, message memory not freed\n");
/* Disable the SSP at the peripheral and SOC level */
write_SSCR0(0, drv_data->ioaddr);
return 0;
}
-static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct dec_serial *info = (struct dec_serial *)tty->driver_data;
int was_stopped;
static ssize_t ixj_read(struct file * file_p, char __user *buf, size_t length, loff_t * ppos)
{
unsigned long i = *ppos;
- IXJ * j = get_ixj(NUM(file_p->f_dentry->d_inode));
+ IXJ * j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
DECLARE_WAITQUEUE(wait, current);
{
int pre_retval;
ssize_t read_retval = 0;
- IXJ *j = get_ixj(NUM(file_p->f_dentry->d_inode));
+ IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
pre_retval = ixj_PreRead(j, 0L);
switch (pre_retval) {
int pre_retval;
ssize_t write_retval = 0;
- IXJ *j = get_ixj(NUM(file_p->f_dentry->d_inode));
+ IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
pre_retval = ixj_PreWrite(j, 0L);
switch (pre_retval) {
{
unsigned int mask = 0;
- IXJ *j = get_ixj(NUM(file_p->f_dentry->d_inode));
+ IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
poll_wait(file_p, &(j->poll_q), wait);
if (j->read_buffer_ready > 0)
static int ixj_fasync(int fd, struct file *file_p, int mode)
{
- IXJ *j = get_ixj(NUM(file_p->f_dentry->d_inode));
+ IXJ *j = get_ixj(NUM(file_p->f_path.dentry->d_inode));
return fasync_helper(fd, file_p, mode, &j->async_queue);
}
5, 6, 7, 8
};
-static void acm_tty_set_termios(struct tty_struct *tty, struct termios *termios_old)
+static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old)
{
struct acm *acm = tty->driver_data;
- struct termios *termios = tty->termios;
+ struct ktermios *termios = tty->termios;
struct usb_cdc_line_coding newline;
int newctrl = acm->ctrlout;
{
loff_t retval = -EINVAL;
- mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
switch(orig) {
case 0:
if (offset > 0) {
default:
break;
}
- mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
return retval;
}
{
struct at91_request *req;
- req = kcalloc(1, sizeof (struct at91_request), gfp_flags);
+ req = kzalloc(sizeof (struct at91_request), gfp_flags);
if (!req)
return NULL;
if (!filp->f_op->fsync)
return -EINVAL;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
mutex_lock(&inode->i_mutex);
rc = filemap_fdatawrite(inode->i_mapping);
- err = filp->f_op->fsync(filp, filp->f_dentry, 1);
+ err = filp->f_op->fsync(filp, filp->f_path.dentry, 1);
if (!rc)
rc = err;
err = filemap_fdatawait(inode->i_mapping);
static void invalidate_sub(struct lun *curlun)
{
struct file *filp = curlun->filp;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
unsigned long rc;
rc = invalidate_inode_pages(inode->i_mapping);
if (!(filp->f_mode & FMODE_WRITE))
ro = 1;
- if (filp->f_dentry)
- inode = filp->f_dentry->d_inode;
+ if (filp->f_path.dentry)
+ inode = filp->f_path.dentry->d_inode;
if (inode && S_ISBLK(inode->i_mode)) {
if (bdev_read_only(inode->i_bdev))
ro = 1;
down_read(&fsg->filesem);
if (backing_file_is_open(curlun)) { // Get the complete pathname
- p = d_path(curlun->filp->f_dentry, curlun->filp->f_vfsmnt,
+ p = d_path(curlun->filp->f_path.dentry, curlun->filp->f_path.mnt,
buf, PAGE_SIZE - 1);
if (IS_ERR(p))
rc = PTR_ERR(p);
if (backing_file_is_open(curlun)) {
p = NULL;
if (pathbuf) {
- p = d_path(curlun->filp->f_dentry,
- curlun->filp->f_vfsmnt,
+ p = d_path(curlun->filp->f_path.dentry,
+ curlun->filp->f_path.mnt,
pathbuf, PATH_MAX);
if (IS_ERR(p))
p = NULL;
static void gs_break(struct tty_struct *tty, int break_state);
static int gs_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
-static void gs_set_termios(struct tty_struct *tty, struct termios *old);
+static void gs_set_termios(struct tty_struct *tty, struct ktermios *old);
static int gs_send(struct gs_dev *dev);
static int gs_send_packet(struct gs_dev *dev, char *packet,
/*
* gs_set_termios
*/
-static void gs_set_termios(struct tty_struct *tty, struct termios *old)
+static void gs_set_termios(struct tty_struct *tty, struct ktermios *old)
{
}
if (size == 0)
return NULL;
- gb = (struct gs_buf *)kmalloc(sizeof(struct gs_buf), kmalloc_flags);
+ gb = kmalloc(sizeof(struct gs_buf), kmalloc_flags);
if (gb == NULL)
return NULL;
/* Adds an urb_entry last in the list for this epid. */
static inline void urb_list_add(struct urb *urb, int epid)
{
- urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG);
+ urb_entry_t *urb_entry = kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG);
assert(urb_entry);
urb_entry->urb = urb;
config USB_HID
tristate "USB Human Interface Device (full HID) support"
- depends on USB
+ default y
+ depends on USB && HID
---help---
- Say Y here if you want full HID support to connect keyboards,
+ Say Y here if you want full HID support to connect USB keyboards,
mice, joysticks, graphic tablets, or any other HID based devices
to your computer via USB. You also need to select HID Input layer
support (below) if you want to use keyboards, mice, joysticks and
comment "Input core support is needed for USB HID input layer or HIDBP support"
depends on USB_HID && INPUT=n
-config USB_HIDINPUT
- bool "HID input layer support"
- default y
- depends on INPUT && USB_HID
- help
- Say Y here if you want to use a USB keyboard, mouse or joystick,
- or any other HID input device.
-
- If unsure, say Y.
-
-config USB_HIDINPUT_POWERBOOK
+config USB_HID_POWERBOOK
bool "Enable support for iBook/PowerBook special keys"
default n
- depends on USB_HIDINPUT
+ depends on USB_HID
help
Say Y here if you want support for the special keys (Fn, Numlock) on
Apple iBooks and PowerBooks.
config HID_FF
bool "Force feedback support (EXPERIMENTAL)"
- depends on USB_HIDINPUT && EXPERIMENTAL
+ depends on USB_HID && EXPERIMENTAL
help
Say Y here is you want force feedback support for a few HID devices.
See below for a list of supported devices.
ifeq ($(CONFIG_USB_HIDDEV),y)
usbhid-objs += hiddev.o
endif
-ifeq ($(CONFIG_USB_HIDINPUT),y)
- usbhid-objs += hid-input.o
-endif
ifeq ($(CONFIG_HID_PID),y)
usbhid-objs += hid-pidff.o
endif
#define APPLE_VENDOR_ID 0x05AC
/* These names come from Info.plist in AppleUSBTrackpad.kext */
-#define GEYSER_ANSI_PRODUCT_ID 0x0214
-#define GEYSER_ISO_PRODUCT_ID 0x0215
-#define GEYSER_JIS_PRODUCT_ID 0x0216
+#define FOUNTAIN_ANSI_PRODUCT_ID 0x020E
+#define FOUNTAIN_ISO_PRODUCT_ID 0x020F
+
+#define FOUNTAIN_TP_ONLY_PRODUCT_ID 0x030A
+
+#define GEYSER1_TP_ONLY_PRODUCT_ID 0x030B
+
+#define GEYSER_ANSI_PRODUCT_ID 0x0214
+#define GEYSER_ISO_PRODUCT_ID 0x0215
+#define GEYSER_JIS_PRODUCT_ID 0x0216
/* MacBook devices */
-#define GEYSER3_ANSI_PRODUCT_ID 0x0217
-#define GEYSER3_ISO_PRODUCT_ID 0x0218
-#define GEYSER3_JIS_PRODUCT_ID 0x0219
+#define GEYSER3_ANSI_PRODUCT_ID 0x0217
+#define GEYSER3_ISO_PRODUCT_ID 0x0218
+#define GEYSER3_JIS_PRODUCT_ID 0x0219
+
+/*
+ * Geyser IV: same as Geyser III according to Info.plist in AppleUSBTrackpad.kext
+ * -> same IOClass (AppleUSBGrIIITrackpad), same acceleration tables
+ */
+#define GEYSER4_ANSI_PRODUCT_ID 0x021A
+#define GEYSER4_ISO_PRODUCT_ID 0x021B
+#define GEYSER4_JIS_PRODUCT_ID 0x021C
#define ATP_DEVICE(prod) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
/* table of devices that work with this driver */
static struct usb_device_id atp_table [] = {
- { ATP_DEVICE(0x020E) },
- { ATP_DEVICE(0x020F) },
- { ATP_DEVICE(0x030A) },
- { ATP_DEVICE(0x030B) },
+ { ATP_DEVICE(FOUNTAIN_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(FOUNTAIN_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(FOUNTAIN_TP_ONLY_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER1_TP_ONLY_PRODUCT_ID) },
/* PowerBooks Oct 2005 */
{ ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) },
+ /* Core Duo MacBook & MacBook Pro */
{ ATP_DEVICE(GEYSER3_ANSI_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER3_ISO_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER3_JIS_PRODUCT_ID) },
+ /* Core2 Duo MacBook & MacBook Pro */
+ { ATP_DEVICE(GEYSER4_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) },
+
/* Terminating entry */
{ }
};
*/
#define ATP_THRESHOLD 5
-/* MacBook Pro (Geyser 3) initialization constants */
+/* MacBook Pro (Geyser 3 & 4) initialization constants */
#define ATP_GEYSER3_MODE_READ_REQUEST_ID 1
#define ATP_GEYSER3_MODE_WRITE_REQUEST_ID 9
#define ATP_GEYSER3_MODE_REQUEST_VALUE 0x300
MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver");
MODULE_LICENSE("GPL");
+/*
+ * Make the threshold a module parameter
+ */
+static int threshold = ATP_THRESHOLD;
+module_param(threshold, int, 0644);
+MODULE_PARM_DESC(threshold, "Discards any change in data from a sensor (trackpad has hundreds of these sensors) less than this value");
+
static int debug = 1;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activate debugging output");
return (productId == GEYSER3_ANSI_PRODUCT_ID) ||
(productId == GEYSER3_ISO_PRODUCT_ID) ||
- (productId == GEYSER3_JIS_PRODUCT_ID);
+ (productId == GEYSER3_JIS_PRODUCT_ID) ||
+ (productId == GEYSER4_ANSI_PRODUCT_ID) ||
+ (productId == GEYSER4_ISO_PRODUCT_ID) ||
+ (productId == GEYSER4_JIS_PRODUCT_ID);
}
static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
int i;
/* values to calculate mean */
int pcum = 0, psum = 0;
+ int is_increasing = 0;
*fingers = 0;
for (i = 0; i < nb_sensors; i++) {
- if (xy_sensors[i] < ATP_THRESHOLD)
+ if (xy_sensors[i] < threshold) {
+ if (is_increasing)
+ is_increasing = 0;
+
continue;
- if ((i - 1 < 0) || (xy_sensors[i - 1] < ATP_THRESHOLD))
+ }
+
+ /*
+ * Makes the finger detection more versatile. For example,
+ * two fingers with no gap will be detected. Also, my
+ * tests show it less likely to have intermittent loss
+ * of multiple finger readings while moving around (scrolling).
+ *
+ * Changes the multiple finger detection to counting humps on
+ * sensors (transitions from nonincreasing to increasing)
+ * instead of counting transitions from low sensors (no
+ * finger reading) to high sensors (finger above
+ * sensor)
+ *
+ * - Jason Parekh <jasonparekh@gmail.com>
+ */
+ if (i < 1 || (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) {
(*fingers)++;
- pcum += xy_sensors[i] * i;
- psum += xy_sensors[i];
+ is_increasing = 1;
+ } else if (i > 0 && xy_sensors[i - 1] >= xy_sensors[i]) {
+ is_increasing = 0;
+ }
+
+ /*
+ * Subtracts threshold so a high sensor that just passes the threshold
+ * won't skew the calculated absolute coordinate. Fixes an issue
+ * where slowly moving the mouse would occassionaly jump a number of
+ * pixels (let me restate--slowly moving the mouse makes this issue
+ * most apparent).
+ */
+ pcum += (xy_sensors[i] - threshold) * i;
+ psum += (xy_sensors[i] - threshold);
}
if (psum > 0) {
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ * Copyright (c) 2006 Jiri Kosina
*/
/*
#include <linux/usb.h>
-#include "hid.h"
+#include <linux/hid.h>
#include <linux/hiddev.h>
+#include "usbhid.h"
/*
* Version Information
module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
-/*
- * Register a new report for a device.
- */
-
-static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
-{
- struct hid_report_enum *report_enum = device->report_enum + type;
- struct hid_report *report;
-
- if (report_enum->report_id_hash[id])
- return report_enum->report_id_hash[id];
-
- if (!(report = kzalloc(sizeof(struct hid_report), GFP_KERNEL)))
- return NULL;
-
- if (id != 0)
- report_enum->numbered = 1;
-
- report->id = id;
- report->type = type;
- report->size = 0;
- report->device = device;
- report_enum->report_id_hash[id] = report;
-
- list_add_tail(&report->list, &report_enum->report_list);
-
- return report;
-}
-
-/*
- * Register a new field for this report.
- */
-
-static struct hid_field *hid_register_field(struct hid_report *report, unsigned usages, unsigned values)
-{
- struct hid_field *field;
-
- if (report->maxfield == HID_MAX_FIELDS) {
- dbg("too many fields in report");
- return NULL;
- }
-
- if (!(field = kzalloc(sizeof(struct hid_field) + usages * sizeof(struct hid_usage)
- + values * sizeof(unsigned), GFP_KERNEL))) return NULL;
-
- field->index = report->maxfield++;
- report->field[field->index] = field;
- field->usage = (struct hid_usage *)(field + 1);
- field->value = (unsigned *)(field->usage + usages);
- field->report = report;
-
- return field;
-}
-
-/*
- * Open a collection. The type/usage is pushed on the stack.
- */
-
-static int open_collection(struct hid_parser *parser, unsigned type)
-{
- struct hid_collection *collection;
- unsigned usage;
-
- usage = parser->local.usage[0];
-
- if (parser->collection_stack_ptr == HID_COLLECTION_STACK_SIZE) {
- dbg("collection stack overflow");
- return -1;
- }
-
- if (parser->device->maxcollection == parser->device->collection_size) {
- collection = kmalloc(sizeof(struct hid_collection) *
- parser->device->collection_size * 2, GFP_KERNEL);
- if (collection == NULL) {
- dbg("failed to reallocate collection array");
- return -1;
- }
- memcpy(collection, parser->device->collection,
- sizeof(struct hid_collection) *
- parser->device->collection_size);
- memset(collection + parser->device->collection_size, 0,
- sizeof(struct hid_collection) *
- parser->device->collection_size);
- kfree(parser->device->collection);
- parser->device->collection = collection;
- parser->device->collection_size *= 2;
- }
-
- parser->collection_stack[parser->collection_stack_ptr++] =
- parser->device->maxcollection;
-
- collection = parser->device->collection +
- parser->device->maxcollection++;
- collection->type = type;
- collection->usage = usage;
- collection->level = parser->collection_stack_ptr - 1;
-
- if (type == HID_COLLECTION_APPLICATION)
- parser->device->maxapplication++;
-
- return 0;
-}
-
-/*
- * Close a collection.
- */
-
-static int close_collection(struct hid_parser *parser)
-{
- if (!parser->collection_stack_ptr) {
- dbg("collection stack underflow");
- return -1;
- }
- parser->collection_stack_ptr--;
- return 0;
-}
-
-/*
- * Climb up the stack, search for the specified collection type
- * and return the usage.
- */
-
-static unsigned hid_lookup_collection(struct hid_parser *parser, unsigned type)
-{
- int n;
- for (n = parser->collection_stack_ptr - 1; n >= 0; n--)
- if (parser->device->collection[parser->collection_stack[n]].type == type)
- return parser->device->collection[parser->collection_stack[n]].usage;
- return 0; /* we know nothing about this usage type */
-}
-
-/*
- * Add a usage to the temporary parser table.
- */
-
-static int hid_add_usage(struct hid_parser *parser, unsigned usage)
-{
- if (parser->local.usage_index >= HID_MAX_USAGES) {
- dbg("usage index exceeded");
- return -1;
- }
- parser->local.usage[parser->local.usage_index] = usage;
- parser->local.collection_index[parser->local.usage_index] =
- parser->collection_stack_ptr ?
- parser->collection_stack[parser->collection_stack_ptr - 1] : 0;
- parser->local.usage_index++;
- return 0;
-}
-
-/*
- * Register a new field for this report.
- */
-
-static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsigned flags)
-{
- struct hid_report *report;
- struct hid_field *field;
- int usages;
- unsigned offset;
- int i;
-
- if (!(report = hid_register_report(parser->device, report_type, parser->global.report_id))) {
- dbg("hid_register_report failed");
- return -1;
- }
-
- if (parser->global.logical_maximum < parser->global.logical_minimum) {
- dbg("logical range invalid %d %d", parser->global.logical_minimum, parser->global.logical_maximum);
- return -1;
- }
-
- offset = report->size;
- report->size += parser->global.report_size * parser->global.report_count;
-
- if (!parser->local.usage_index) /* Ignore padding fields */
- return 0;
-
- usages = max_t(int, parser->local.usage_index, parser->global.report_count);
-
- if ((field = hid_register_field(report, usages, parser->global.report_count)) == NULL)
- return 0;
-
- field->physical = hid_lookup_collection(parser, HID_COLLECTION_PHYSICAL);
- field->logical = hid_lookup_collection(parser, HID_COLLECTION_LOGICAL);
- field->application = hid_lookup_collection(parser, HID_COLLECTION_APPLICATION);
-
- for (i = 0; i < usages; i++) {
- int j = i;
- /* Duplicate the last usage we parsed if we have excess values */
- if (i >= parser->local.usage_index)
- j = parser->local.usage_index - 1;
- field->usage[i].hid = parser->local.usage[j];
- field->usage[i].collection_index =
- parser->local.collection_index[j];
- }
-
- field->maxusage = usages;
- field->flags = flags;
- field->report_offset = offset;
- field->report_type = report_type;
- field->report_size = parser->global.report_size;
- field->report_count = parser->global.report_count;
- field->logical_minimum = parser->global.logical_minimum;
- field->logical_maximum = parser->global.logical_maximum;
- field->physical_minimum = parser->global.physical_minimum;
- field->physical_maximum = parser->global.physical_maximum;
- field->unit_exponent = parser->global.unit_exponent;
- field->unit = parser->global.unit;
-
- return 0;
-}
-
-/*
- * Read data value from item.
- */
-
-static u32 item_udata(struct hid_item *item)
-{
- switch (item->size) {
- case 1: return item->data.u8;
- case 2: return item->data.u16;
- case 4: return item->data.u32;
- }
- return 0;
-}
-
-static s32 item_sdata(struct hid_item *item)
-{
- switch (item->size) {
- case 1: return item->data.s8;
- case 2: return item->data.s16;
- case 4: return item->data.s32;
- }
- return 0;
-}
-
-/*
- * Process a global item.
- */
-
-static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
-{
- switch (item->tag) {
-
- case HID_GLOBAL_ITEM_TAG_PUSH:
-
- if (parser->global_stack_ptr == HID_GLOBAL_STACK_SIZE) {
- dbg("global enviroment stack overflow");
- return -1;
- }
-
- memcpy(parser->global_stack + parser->global_stack_ptr++,
- &parser->global, sizeof(struct hid_global));
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_POP:
-
- if (!parser->global_stack_ptr) {
- dbg("global enviroment stack underflow");
- return -1;
- }
-
- memcpy(&parser->global, parser->global_stack + --parser->global_stack_ptr,
- sizeof(struct hid_global));
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_USAGE_PAGE:
- parser->global.usage_page = item_udata(item);
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM:
- parser->global.logical_minimum = item_sdata(item);
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM:
- if (parser->global.logical_minimum < 0)
- parser->global.logical_maximum = item_sdata(item);
- else
- parser->global.logical_maximum = item_udata(item);
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM:
- parser->global.physical_minimum = item_sdata(item);
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM:
- if (parser->global.physical_minimum < 0)
- parser->global.physical_maximum = item_sdata(item);
- else
- parser->global.physical_maximum = item_udata(item);
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT:
- parser->global.unit_exponent = item_sdata(item);
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_UNIT:
- parser->global.unit = item_udata(item);
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_REPORT_SIZE:
- if ((parser->global.report_size = item_udata(item)) > 32) {
- dbg("invalid report_size %d", parser->global.report_size);
- return -1;
- }
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_REPORT_COUNT:
- if ((parser->global.report_count = item_udata(item)) > HID_MAX_USAGES) {
- dbg("invalid report_count %d", parser->global.report_count);
- return -1;
- }
- return 0;
-
- case HID_GLOBAL_ITEM_TAG_REPORT_ID:
- if ((parser->global.report_id = item_udata(item)) == 0) {
- dbg("report_id 0 is invalid");
- return -1;
- }
- return 0;
-
- default:
- dbg("unknown global tag 0x%x", item->tag);
- return -1;
- }
-}
-
-/*
- * Process a local item.
- */
-
-static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
-{
- __u32 data;
- unsigned n;
-
- if (item->size == 0) {
- dbg("item data expected for local item");
- return -1;
- }
-
- data = item_udata(item);
-
- switch (item->tag) {
-
- case HID_LOCAL_ITEM_TAG_DELIMITER:
-
- if (data) {
- /*
- * We treat items before the first delimiter
- * as global to all usage sets (branch 0).
- * In the moment we process only these global
- * items and the first delimiter set.
- */
- if (parser->local.delimiter_depth != 0) {
- dbg("nested delimiters");
- return -1;
- }
- parser->local.delimiter_depth++;
- parser->local.delimiter_branch++;
- } else {
- if (parser->local.delimiter_depth < 1) {
- dbg("bogus close delimiter");
- return -1;
- }
- parser->local.delimiter_depth--;
- }
- return 1;
-
- case HID_LOCAL_ITEM_TAG_USAGE:
-
- if (parser->local.delimiter_branch > 1) {
- dbg("alternative usage ignored");
- return 0;
- }
-
- if (item->size <= 2)
- data = (parser->global.usage_page << 16) + data;
-
- return hid_add_usage(parser, data);
-
- case HID_LOCAL_ITEM_TAG_USAGE_MINIMUM:
-
- if (parser->local.delimiter_branch > 1) {
- dbg("alternative usage ignored");
- return 0;
- }
-
- if (item->size <= 2)
- data = (parser->global.usage_page << 16) + data;
-
- parser->local.usage_minimum = data;
- return 0;
-
- case HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM:
-
- if (parser->local.delimiter_branch > 1) {
- dbg("alternative usage ignored");
- return 0;
- }
-
- if (item->size <= 2)
- data = (parser->global.usage_page << 16) + data;
-
- for (n = parser->local.usage_minimum; n <= data; n++)
- if (hid_add_usage(parser, n)) {
- dbg("hid_add_usage failed\n");
- return -1;
- }
- return 0;
-
- default:
-
- dbg("unknown local item tag 0x%x", item->tag);
- return 0;
- }
- return 0;
-}
-
-/*
- * Process a main item.
- */
-
-static int hid_parser_main(struct hid_parser *parser, struct hid_item *item)
-{
- __u32 data;
- int ret;
-
- data = item_udata(item);
-
- switch (item->tag) {
- case HID_MAIN_ITEM_TAG_BEGIN_COLLECTION:
- ret = open_collection(parser, data & 0xff);
- break;
- case HID_MAIN_ITEM_TAG_END_COLLECTION:
- ret = close_collection(parser);
- break;
- case HID_MAIN_ITEM_TAG_INPUT:
- ret = hid_add_field(parser, HID_INPUT_REPORT, data);
- break;
- case HID_MAIN_ITEM_TAG_OUTPUT:
- ret = hid_add_field(parser, HID_OUTPUT_REPORT, data);
- break;
- case HID_MAIN_ITEM_TAG_FEATURE:
- ret = hid_add_field(parser, HID_FEATURE_REPORT, data);
- break;
- default:
- dbg("unknown main item tag 0x%x", item->tag);
- ret = 0;
- }
-
- memset(&parser->local, 0, sizeof(parser->local)); /* Reset the local parser environment */
-
- return ret;
-}
-
-/*
- * Process a reserved item.
- */
-
-static int hid_parser_reserved(struct hid_parser *parser, struct hid_item *item)
-{
- dbg("reserved item type, tag 0x%x", item->tag);
- return 0;
-}
-
-/*
- * Free a report and all registered fields. The field->usage and
- * field->value table's are allocated behind the field, so we need
- * only to free(field) itself.
- */
-
-static void hid_free_report(struct hid_report *report)
-{
- unsigned n;
-
- for (n = 0; n < report->maxfield; n++)
- kfree(report->field[n]);
- kfree(report);
-}
-
-/*
- * Free a device structure, all reports, and all fields.
- */
-
-static void hid_free_device(struct hid_device *device)
-{
- unsigned i,j;
-
- for (i = 0; i < HID_REPORT_TYPES; i++) {
- struct hid_report_enum *report_enum = device->report_enum + i;
-
- for (j = 0; j < 256; j++) {
- struct hid_report *report = report_enum->report_id_hash[j];
- if (report)
- hid_free_report(report);
- }
- }
-
- kfree(device->rdesc);
- kfree(device);
-}
-
-/*
- * Fetch a report description item from the data stream. We support long
- * items, though they are not used yet.
- */
-
-static u8 *fetch_item(__u8 *start, __u8 *end, struct hid_item *item)
-{
- u8 b;
-
- if ((end - start) <= 0)
- return NULL;
-
- b = *start++;
-
- item->type = (b >> 2) & 3;
- item->tag = (b >> 4) & 15;
-
- if (item->tag == HID_ITEM_TAG_LONG) {
-
- item->format = HID_ITEM_FORMAT_LONG;
-
- if ((end - start) < 2)
- return NULL;
-
- item->size = *start++;
- item->tag = *start++;
-
- if ((end - start) < item->size)
- return NULL;
-
- item->data.longdata = start;
- start += item->size;
- return start;
- }
-
- item->format = HID_ITEM_FORMAT_SHORT;
- item->size = b & 3;
-
- switch (item->size) {
-
- case 0:
- return start;
-
- case 1:
- if ((end - start) < 1)
- return NULL;
- item->data.u8 = *start++;
- return start;
-
- case 2:
- if ((end - start) < 2)
- return NULL;
- item->data.u16 = le16_to_cpu(get_unaligned((__le16*)start));
- start = (__u8 *)((__le16 *)start + 1);
- return start;
-
- case 3:
- item->size++;
- if ((end - start) < 4)
- return NULL;
- item->data.u32 = le32_to_cpu(get_unaligned((__le32*)start));
- start = (__u8 *)((__le32 *)start + 1);
- return start;
- }
-
- return NULL;
-}
-
-/*
- * Parse a report description into a hid_device structure. Reports are
- * enumerated, fields are attached to these reports.
- */
-
-static struct hid_device *hid_parse_report(__u8 *start, unsigned size)
-{
- struct hid_device *device;
- struct hid_parser *parser;
- struct hid_item item;
- __u8 *end;
- unsigned i;
- static int (*dispatch_type[])(struct hid_parser *parser,
- struct hid_item *item) = {
- hid_parser_main,
- hid_parser_global,
- hid_parser_local,
- hid_parser_reserved
- };
-
- if (!(device = kzalloc(sizeof(struct hid_device), GFP_KERNEL)))
- return NULL;
-
- if (!(device->collection = kzalloc(sizeof(struct hid_collection) *
- HID_DEFAULT_NUM_COLLECTIONS, GFP_KERNEL))) {
- kfree(device);
- return NULL;
- }
- device->collection_size = HID_DEFAULT_NUM_COLLECTIONS;
-
- for (i = 0; i < HID_REPORT_TYPES; i++)
- INIT_LIST_HEAD(&device->report_enum[i].report_list);
-
- if (!(device->rdesc = (__u8 *)kmalloc(size, GFP_KERNEL))) {
- kfree(device->collection);
- kfree(device);
- return NULL;
- }
- memcpy(device->rdesc, start, size);
- device->rsize = size;
-
- if (!(parser = kzalloc(sizeof(struct hid_parser), GFP_KERNEL))) {
- kfree(device->rdesc);
- kfree(device->collection);
- kfree(device);
- return NULL;
- }
- parser->device = device;
-
- end = start + size;
- while ((start = fetch_item(start, end, &item)) != NULL) {
-
- if (item.format != HID_ITEM_FORMAT_SHORT) {
- dbg("unexpected long global item");
- kfree(device->collection);
- hid_free_device(device);
- kfree(parser);
- return NULL;
- }
-
- if (dispatch_type[item.type](parser, &item)) {
- dbg("item %u %u %u %u parsing failed\n",
- item.format, (unsigned)item.size, (unsigned)item.type, (unsigned)item.tag);
- kfree(device->collection);
- hid_free_device(device);
- kfree(parser);
- return NULL;
- }
-
- if (start == end) {
- if (parser->collection_stack_ptr) {
- dbg("unbalanced collection at end of report description");
- kfree(device->collection);
- hid_free_device(device);
- kfree(parser);
- return NULL;
- }
- if (parser->local.delimiter_depth) {
- dbg("unbalanced delimiter at end of report description");
- kfree(device->collection);
- hid_free_device(device);
- kfree(parser);
- return NULL;
- }
- kfree(parser);
- return device;
- }
- }
-
- dbg("item fetching failed at offset %d\n", (int)(end - start));
- kfree(device->collection);
- hid_free_device(device);
- kfree(parser);
- return NULL;
-}
-
-/*
- * Convert a signed n-bit integer to signed 32-bit integer. Common
- * cases are done through the compiler, the screwed things has to be
- * done by hand.
- */
-
-static s32 snto32(__u32 value, unsigned n)
-{
- switch (n) {
- case 8: return ((__s8)value);
- case 16: return ((__s16)value);
- case 32: return ((__s32)value);
- }
- return value & (1 << (n - 1)) ? value | (-1 << n) : value;
-}
-
-/*
- * Convert a signed 32-bit integer to a signed n-bit integer.
- */
-
-static u32 s32ton(__s32 value, unsigned n)
-{
- s32 a = value >> (n - 1);
- if (a && a != -1)
- return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1;
- return value & ((1 << n) - 1);
-}
-
-/*
- * Extract/implement a data field from/to a little endian report (bit array).
- *
- * Code sort-of follows HID spec:
- * http://www.usb.org/developers/devclass_docs/HID1_11.pdf
- *
- * While the USB HID spec allows unlimited length bit fields in "report
- * descriptors", most devices never use more than 16 bits.
- * One model of UPS is claimed to report "LINEV" as a 32-bit field.
- * Search linux-kernel and linux-usb-devel archives for "hid-core extract".
- */
-
-static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n)
-{
- u64 x;
-
- WARN_ON(n > 32);
-
- report += offset >> 3; /* adjust byte index */
- offset &= 7; /* now only need bit offset into one byte */
- x = get_unaligned((u64 *) report);
- x = le64_to_cpu(x);
- x = (x >> offset) & ((1ULL << n) - 1); /* extract bit field */
- return (u32) x;
-}
-
-/*
- * "implement" : set bits in a little endian bit stream.
- * Same concepts as "extract" (see comments above).
- * The data mangled in the bit stream remains in little endian
- * order the whole time. It make more sense to talk about
- * endianness of register values by considering a register
- * a "cached" copy of the little endiad bit stream.
- */
-static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value)
-{
- u64 x;
- u64 m = (1ULL << n) - 1;
-
- WARN_ON(n > 32);
-
- WARN_ON(value > m);
- value &= m;
-
- report += offset >> 3;
- offset &= 7;
-
- x = get_unaligned((u64 *)report);
- x &= cpu_to_le64(~(m << offset));
- x |= cpu_to_le64(((u64) value) << offset);
- put_unaligned(x, (u64 *) report);
-}
-
-/*
- * Search an array for a value.
- */
-
-static __inline__ int search(__s32 *array, __s32 value, unsigned n)
-{
- while (n--) {
- if (*array++ == value)
- return 0;
- }
- return -1;
-}
-
-static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value, int interrupt)
-{
- hid_dump_input(usage, value);
- if (hid->claimed & HID_CLAIMED_INPUT)
- hidinput_hid_event(hid, field, usage, value);
- if (hid->claimed & HID_CLAIMED_HIDDEV && interrupt)
- hiddev_hid_event(hid, field, usage, value);
-}
-
-/*
- * Analyse a received field, and fetch the data from it. The field
- * content is stored for next report processing (we do differential
- * reporting to the layer).
- */
-
-static void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt)
-{
- unsigned n;
- unsigned count = field->report_count;
- unsigned offset = field->report_offset;
- unsigned size = field->report_size;
- __s32 min = field->logical_minimum;
- __s32 max = field->logical_maximum;
- __s32 *value;
-
- if (!(value = kmalloc(sizeof(__s32) * count, GFP_ATOMIC)))
- return;
-
- for (n = 0; n < count; n++) {
-
- value[n] = min < 0 ? snto32(extract(data, offset + n * size, size), size) :
- extract(data, offset + n * size, size);
-
- if (!(field->flags & HID_MAIN_ITEM_VARIABLE) /* Ignore report if ErrorRollOver */
- && value[n] >= min && value[n] <= max
- && field->usage[value[n] - min].hid == HID_UP_KEYBOARD + 1)
- goto exit;
- }
-
- for (n = 0; n < count; n++) {
-
- if (HID_MAIN_ITEM_VARIABLE & field->flags) {
- hid_process_event(hid, field, &field->usage[n], value[n], interrupt);
- continue;
- }
-
- if (field->value[n] >= min && field->value[n] <= max
- && field->usage[field->value[n] - min].hid
- && search(value, field->value[n], count))
- hid_process_event(hid, field, &field->usage[field->value[n] - min], 0, interrupt);
-
- if (value[n] >= min && value[n] <= max
- && field->usage[value[n] - min].hid
- && search(field->value, value[n], count))
- hid_process_event(hid, field, &field->usage[value[n] - min], 1, interrupt);
- }
-
- memcpy(field->value, value, count * sizeof(__s32));
-exit:
- kfree(value);
-}
-
-static int hid_input_report(int type, struct urb *urb, int interrupt)
-{
- struct hid_device *hid = urb->context;
- struct hid_report_enum *report_enum = hid->report_enum + type;
- u8 *data = urb->transfer_buffer;
- int len = urb->actual_length;
- struct hid_report *report;
- int n, size;
-
- if (!len) {
- dbg("empty report");
- return -1;
- }
-
-#ifdef DEBUG_DATA
- printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", len, report_enum->numbered ? "" : "un");
-#endif
-
- n = 0; /* Normally report number is 0 */
- if (report_enum->numbered) { /* Device uses numbered reports, data[0] is report number */
- n = *data++;
- len--;
- }
-
-#ifdef DEBUG_DATA
- {
- int i;
- printk(KERN_DEBUG __FILE__ ": report %d (size %u) = ", n, len);
- for (i = 0; i < len; i++)
- printk(" %02x", data[i]);
- printk("\n");
- }
-#endif
-
- if (!(report = report_enum->report_id_hash[n])) {
- dbg("undefined report_id %d received", n);
- return -1;
- }
-
- size = ((report->size - 1) >> 3) + 1;
-
- if (len < size) {
- dbg("report %d is too short, (%d < %d)", report->id, len, size);
- memset(data + len, 0, size - len);
- }
-
- if (hid->claimed & HID_CLAIMED_HIDDEV)
- hiddev_report_event(hid, report);
-
- for (n = 0; n < report->maxfield; n++)
- hid_input_field(hid, report->field[n], data, interrupt);
-
- if (hid->claimed & HID_CLAIMED_INPUT)
- hidinput_report_event(hid, report);
-
- return 0;
-}
+static int usbhid_pb_fnmode = 1;
+module_param_named(pb_fnmode, usbhid_pb_fnmode, int, 0644);
+MODULE_PARM_DESC(pb_fnmode,
+ "Mode of fn key on PowerBooks (0 = disabled, 1 = fkeyslast, 2 = fkeysfirst)");
/*
* Input submission and I/O error handler.
{
unsigned long flags;
int rc = 0;
+ struct usbhid_device *usbhid = hid->driver_data;
- spin_lock_irqsave(&hid->inlock, flags);
- if (hid->open > 0 && !test_bit(HID_SUSPENDED, &hid->iofl) &&
- !test_and_set_bit(HID_IN_RUNNING, &hid->iofl)) {
- rc = usb_submit_urb(hid->urbin, GFP_ATOMIC);
+ spin_lock_irqsave(&usbhid->inlock, flags);
+ if (hid->open > 0 && !test_bit(HID_SUSPENDED, &usbhid->iofl) &&
+ !test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
+ rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC);
if (rc != 0)
- clear_bit(HID_IN_RUNNING, &hid->iofl);
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
}
- spin_unlock_irqrestore(&hid->inlock, flags);
+ spin_unlock_irqrestore(&usbhid->inlock, flags);
return rc;
}
static void hid_retry_timeout(unsigned long _hid)
{
struct hid_device *hid = (struct hid_device *) _hid;
+ struct usbhid_device *usbhid = hid->driver_data;
- dev_dbg(&hid->intf->dev, "retrying intr urb\n");
+ dev_dbg(&usbhid->intf->dev, "retrying intr urb\n");
if (hid_start_in(hid))
hid_io_error(hid);
}
/* Workqueue routine to reset the device or clear a halt */
static void hid_reset(struct work_struct *work)
{
- struct hid_device *hid =
- container_of(work, struct hid_device, reset_work);
+ struct usbhid_device *usbhid =
+ container_of(work, struct usbhid_device, reset_work);
+ struct hid_device *hid = usbhid->hid;
int rc_lock, rc = 0;
- if (test_bit(HID_CLEAR_HALT, &hid->iofl)) {
- dev_dbg(&hid->intf->dev, "clear halt\n");
- rc = usb_clear_halt(hid->dev, hid->urbin->pipe);
- clear_bit(HID_CLEAR_HALT, &hid->iofl);
+ if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
+ dev_dbg(&usbhid->intf->dev, "clear halt\n");
+ rc = usb_clear_halt(to_usb_device(hid->dev), usbhid->urbin->pipe);
+ clear_bit(HID_CLEAR_HALT, &usbhid->iofl);
hid_start_in(hid);
}
- else if (test_bit(HID_RESET_PENDING, &hid->iofl)) {
- dev_dbg(&hid->intf->dev, "resetting device\n");
- rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf);
+ else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
+ dev_dbg(&usbhid->intf->dev, "resetting device\n");
+ rc = rc_lock = usb_lock_device_for_reset(to_usb_device(hid->dev), usbhid->intf);
if (rc_lock >= 0) {
- rc = usb_reset_composite_device(hid->dev, hid->intf);
+ rc = usb_reset_composite_device(to_usb_device(hid->dev), usbhid->intf);
if (rc_lock)
- usb_unlock_device(hid->dev);
+ usb_unlock_device(to_usb_device(hid->dev));
}
- clear_bit(HID_RESET_PENDING, &hid->iofl);
+ clear_bit(HID_RESET_PENDING, &usbhid->iofl);
}
switch (rc) {
case 0:
- if (!test_bit(HID_IN_RUNNING, &hid->iofl))
+ if (!test_bit(HID_IN_RUNNING, &usbhid->iofl))
hid_io_error(hid);
break;
default:
err("can't reset device, %s-%s/input%d, status %d",
- hid->dev->bus->bus_name,
- hid->dev->devpath,
- hid->ifnum, rc);
+ to_usb_device(hid->dev)->bus->bus_name,
+ to_usb_device(hid->dev)->devpath,
+ usbhid->ifnum, rc);
/* FALLTHROUGH */
case -EHOSTUNREACH:
case -ENODEV:
static void hid_io_error(struct hid_device *hid)
{
unsigned long flags;
+ struct usbhid_device *usbhid = hid->driver_data;
- spin_lock_irqsave(&hid->inlock, flags);
+ spin_lock_irqsave(&usbhid->inlock, flags);
/* Stop when disconnected */
- if (usb_get_intfdata(hid->intf) == NULL)
+ if (usb_get_intfdata(usbhid->intf) == NULL)
goto done;
/* When an error occurs, retry at increasing intervals */
- if (hid->retry_delay == 0) {
- hid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */
- hid->stop_retry = jiffies + msecs_to_jiffies(1000);
- } else if (hid->retry_delay < 100)
- hid->retry_delay *= 2;
+ if (usbhid->retry_delay == 0) {
+ usbhid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */
+ usbhid->stop_retry = jiffies + msecs_to_jiffies(1000);
+ } else if (usbhid->retry_delay < 100)
+ usbhid->retry_delay *= 2;
- if (time_after(jiffies, hid->stop_retry)) {
+ if (time_after(jiffies, usbhid->stop_retry)) {
/* Retries failed, so do a port reset */
- if (!test_and_set_bit(HID_RESET_PENDING, &hid->iofl)) {
- schedule_work(&hid->reset_work);
+ if (!test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) {
+ schedule_work(&usbhid->reset_work);
goto done;
}
}
- mod_timer(&hid->io_retry,
- jiffies + msecs_to_jiffies(hid->retry_delay));
+ mod_timer(&usbhid->io_retry,
+ jiffies + msecs_to_jiffies(usbhid->retry_delay));
done:
- spin_unlock_irqrestore(&hid->inlock, flags);
+ spin_unlock_irqrestore(&usbhid->inlock, flags);
}
/*
static void hid_irq_in(struct urb *urb)
{
struct hid_device *hid = urb->context;
+ struct usbhid_device *usbhid = hid->driver_data;
int status;
switch (urb->status) {
case 0: /* success */
- hid->retry_delay = 0;
- hid_input_report(HID_INPUT_REPORT, urb, 1);
+ usbhid->retry_delay = 0;
+ hid_input_report(urb->context, HID_INPUT_REPORT,
+ urb->transfer_buffer,
+ urb->actual_length, 1);
break;
case -EPIPE: /* stall */
- clear_bit(HID_IN_RUNNING, &hid->iofl);
- set_bit(HID_CLEAR_HALT, &hid->iofl);
- schedule_work(&hid->reset_work);
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
+ set_bit(HID_CLEAR_HALT, &usbhid->iofl);
+ schedule_work(&usbhid->reset_work);
return;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN: /* unplug */
- clear_bit(HID_IN_RUNNING, &hid->iofl);
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
return;
case -EILSEQ: /* protocol error or unplug */
case -EPROTO: /* protocol error or unplug */
case -ETIME: /* protocol error or unplug */
case -ETIMEDOUT: /* Should never happen, but... */
- clear_bit(HID_IN_RUNNING, &hid->iofl);
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
hid_io_error(hid);
return;
default: /* error */
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
- clear_bit(HID_IN_RUNNING, &hid->iofl);
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
if (status != -EPERM) {
err("can't resubmit intr, %s-%s/input%d, status %d",
- hid->dev->bus->bus_name,
- hid->dev->devpath,
- hid->ifnum, status);
+ to_usb_device(hid->dev)->bus->bus_name,
+ to_usb_device(hid->dev)->devpath,
+ usbhid->ifnum, status);
hid_io_error(hid);
}
}
}
/*
- * Output the field into the report.
- */
-
-static void hid_output_field(struct hid_field *field, __u8 *data)
-{
- unsigned count = field->report_count;
- unsigned offset = field->report_offset;
- unsigned size = field->report_size;
- unsigned n;
-
- for (n = 0; n < count; n++) {
- if (field->logical_minimum < 0) /* signed values */
- implement(data, offset + n * size, size, s32ton(field->value[n], size));
- else /* unsigned values */
- implement(data, offset + n * size, size, field->value[n]);
- }
-}
-
-/*
- * Create a report.
- */
-
-static void hid_output_report(struct hid_report *report, __u8 *data)
-{
- unsigned n;
-
- if (report->id > 0)
- *data++ = report->id;
-
- for (n = 0; n < report->maxfield; n++)
- hid_output_field(report->field[n], data);
-}
-
-/*
- * Set a field value. The report this field belongs to has to be
- * created and transferred to the device, to set this value in the
- * device.
- */
-
-int hid_set_field(struct hid_field *field, unsigned offset, __s32 value)
-{
- unsigned size = field->report_size;
-
- hid_dump_input(field->usage + offset, value);
-
- if (offset >= field->report_count) {
- dbg("offset (%d) exceeds report_count (%d)", offset, field->report_count);
- hid_dump_field(field, 8);
- return -1;
- }
- if (field->logical_minimum < 0) {
- if (value != snto32(s32ton(value, size), size)) {
- dbg("value %d is out of range", value);
- return -1;
- }
- }
- field->value[offset] = value;
- return 0;
-}
-
-/*
* Find a report field with a specified HID usage.
*/
#if 0
static int hid_submit_out(struct hid_device *hid)
{
struct hid_report *report;
+ struct usbhid_device *usbhid = hid->driver_data;
- report = hid->out[hid->outtail];
+ report = usbhid->out[usbhid->outtail];
- hid_output_report(report, hid->outbuf);
- hid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
- hid->urbout->dev = hid->dev;
+ hid_output_report(report, usbhid->outbuf);
+ usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
+ usbhid->urbout->dev = to_usb_device(hid->dev);
dbg("submitting out urb");
- if (usb_submit_urb(hid->urbout, GFP_ATOMIC)) {
+ if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
err("usb_submit_urb(out) failed");
return -1;
}
struct hid_report *report;
unsigned char dir;
int len;
+ struct usbhid_device *usbhid = hid->driver_data;
- report = hid->ctrl[hid->ctrltail].report;
- dir = hid->ctrl[hid->ctrltail].dir;
+ report = usbhid->ctrl[usbhid->ctrltail].report;
+ dir = usbhid->ctrl[usbhid->ctrltail].dir;
len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
if (dir == USB_DIR_OUT) {
- hid_output_report(report, hid->ctrlbuf);
- hid->urbctrl->pipe = usb_sndctrlpipe(hid->dev, 0);
- hid->urbctrl->transfer_buffer_length = len;
+ hid_output_report(report, usbhid->ctrlbuf);
+ usbhid->urbctrl->pipe = usb_sndctrlpipe(to_usb_device(hid->dev), 0);
+ usbhid->urbctrl->transfer_buffer_length = len;
} else {
int maxpacket, padlen;
- hid->urbctrl->pipe = usb_rcvctrlpipe(hid->dev, 0);
- maxpacket = usb_maxpacket(hid->dev, hid->urbctrl->pipe, 0);
+ usbhid->urbctrl->pipe = usb_rcvctrlpipe(to_usb_device(hid->dev), 0);
+ maxpacket = usb_maxpacket(to_usb_device(hid->dev), usbhid->urbctrl->pipe, 0);
if (maxpacket > 0) {
padlen = (len + maxpacket - 1) / maxpacket;
padlen *= maxpacket;
- if (padlen > hid->bufsize)
- padlen = hid->bufsize;
+ if (padlen > usbhid->bufsize)
+ padlen = usbhid->bufsize;
} else
padlen = 0;
- hid->urbctrl->transfer_buffer_length = padlen;
+ usbhid->urbctrl->transfer_buffer_length = padlen;
}
- hid->urbctrl->dev = hid->dev;
+ usbhid->urbctrl->dev = to_usb_device(hid->dev);
- hid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
- hid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
- hid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
- hid->cr->wIndex = cpu_to_le16(hid->ifnum);
- hid->cr->wLength = cpu_to_le16(len);
+ usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
+ usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
+ usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
+ usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
+ usbhid->cr->wLength = cpu_to_le16(len);
dbg("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u",
- hid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
- hid->cr->wValue, hid->cr->wIndex, hid->cr->wLength);
+ usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
+ usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
- if (usb_submit_urb(hid->urbctrl, GFP_ATOMIC)) {
+ if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
err("usb_submit_urb(ctrl) failed");
return -1;
}
static void hid_irq_out(struct urb *urb)
{
struct hid_device *hid = urb->context;
+ struct usbhid_device *usbhid = hid->driver_data;
unsigned long flags;
int unplug = 0;
warn("output irq status %d received", urb->status);
}
- spin_lock_irqsave(&hid->outlock, flags);
+ spin_lock_irqsave(&usbhid->outlock, flags);
if (unplug)
- hid->outtail = hid->outhead;
+ usbhid->outtail = usbhid->outhead;
else
- hid->outtail = (hid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
+ usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
- if (hid->outhead != hid->outtail) {
+ if (usbhid->outhead != usbhid->outtail) {
if (hid_submit_out(hid)) {
- clear_bit(HID_OUT_RUNNING, &hid->iofl);
+ clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
wake_up(&hid->wait);
}
- spin_unlock_irqrestore(&hid->outlock, flags);
+ spin_unlock_irqrestore(&usbhid->outlock, flags);
return;
}
- clear_bit(HID_OUT_RUNNING, &hid->iofl);
- spin_unlock_irqrestore(&hid->outlock, flags);
+ clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
+ spin_unlock_irqrestore(&usbhid->outlock, flags);
wake_up(&hid->wait);
}
static void hid_ctrl(struct urb *urb)
{
struct hid_device *hid = urb->context;
+ struct usbhid_device *usbhid = hid->driver_data;
unsigned long flags;
int unplug = 0;
- spin_lock_irqsave(&hid->ctrllock, flags);
+ spin_lock_irqsave(&usbhid->ctrllock, flags);
switch (urb->status) {
case 0: /* success */
- if (hid->ctrl[hid->ctrltail].dir == USB_DIR_IN)
- hid_input_report(hid->ctrl[hid->ctrltail].report->type, urb, 0);
+ if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN)
+ hid_input_report(urb->context, usbhid->ctrl[usbhid->ctrltail].report->type,
+ urb->transfer_buffer, urb->actual_length, 0);
break;
case -ESHUTDOWN: /* unplug */
unplug = 1;
}
if (unplug)
- hid->ctrltail = hid->ctrlhead;
+ usbhid->ctrltail = usbhid->ctrlhead;
else
- hid->ctrltail = (hid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
+ usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
- if (hid->ctrlhead != hid->ctrltail) {
+ if (usbhid->ctrlhead != usbhid->ctrltail) {
if (hid_submit_ctrl(hid)) {
- clear_bit(HID_CTRL_RUNNING, &hid->iofl);
+ clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
wake_up(&hid->wait);
}
- spin_unlock_irqrestore(&hid->ctrllock, flags);
+ spin_unlock_irqrestore(&usbhid->ctrllock, flags);
return;
}
- clear_bit(HID_CTRL_RUNNING, &hid->iofl);
- spin_unlock_irqrestore(&hid->ctrllock, flags);
+ clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+ spin_unlock_irqrestore(&usbhid->ctrllock, flags);
wake_up(&hid->wait);
}
-void hid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
+void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
{
int head;
unsigned long flags;
+ struct usbhid_device *usbhid = hid->driver_data;
if ((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN)
return;
- if (hid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) {
+ if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) {
- spin_lock_irqsave(&hid->outlock, flags);
+ spin_lock_irqsave(&usbhid->outlock, flags);
- if ((head = (hid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == hid->outtail) {
- spin_unlock_irqrestore(&hid->outlock, flags);
+ if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) {
+ spin_unlock_irqrestore(&usbhid->outlock, flags);
warn("output queue full");
return;
}
- hid->out[hid->outhead] = report;
- hid->outhead = head;
+ usbhid->out[usbhid->outhead] = report;
+ usbhid->outhead = head;
- if (!test_and_set_bit(HID_OUT_RUNNING, &hid->iofl))
+ if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
if (hid_submit_out(hid))
- clear_bit(HID_OUT_RUNNING, &hid->iofl);
+ clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
- spin_unlock_irqrestore(&hid->outlock, flags);
+ spin_unlock_irqrestore(&usbhid->outlock, flags);
return;
}
- spin_lock_irqsave(&hid->ctrllock, flags);
+ spin_lock_irqsave(&usbhid->ctrllock, flags);
- if ((head = (hid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == hid->ctrltail) {
- spin_unlock_irqrestore(&hid->ctrllock, flags);
+ if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) {
+ spin_unlock_irqrestore(&usbhid->ctrllock, flags);
warn("control queue full");
return;
}
- hid->ctrl[hid->ctrlhead].report = report;
- hid->ctrl[hid->ctrlhead].dir = dir;
- hid->ctrlhead = head;
+ usbhid->ctrl[usbhid->ctrlhead].report = report;
+ usbhid->ctrl[usbhid->ctrlhead].dir = dir;
+ usbhid->ctrlhead = head;
- if (!test_and_set_bit(HID_CTRL_RUNNING, &hid->iofl))
+ if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
if (hid_submit_ctrl(hid))
- clear_bit(HID_CTRL_RUNNING, &hid->iofl);
+ clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+
+ spin_unlock_irqrestore(&usbhid->ctrllock, flags);
+}
+
+static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+ struct hid_device *hid = dev->private;
+ struct hid_field *field;
+ int offset;
+
+ if (type == EV_FF)
+ return input_ff_event(dev, type, code, value);
+
+ if (type != EV_LED)
+ return -1;
+
+ if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) {
+ warn("event field not found");
+ return -1;
+ }
+
+ hid_set_field(field, offset, value);
+ usbhid_submit_report(hid, field->report, USB_DIR_OUT);
- spin_unlock_irqrestore(&hid->ctrllock, flags);
+ return 0;
}
-int hid_wait_io(struct hid_device *hid)
+int usbhid_wait_io(struct hid_device *hid)
{
- if (!wait_event_timeout(hid->wait, (!test_bit(HID_CTRL_RUNNING, &hid->iofl) &&
- !test_bit(HID_OUT_RUNNING, &hid->iofl)),
+ struct usbhid_device *usbhid = hid->driver_data;
+
+ if (!wait_event_timeout(hid->wait, (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) &&
+ !test_bit(HID_OUT_RUNNING, &usbhid->iofl)),
10*HZ)) {
dbg("timeout waiting for ctrl or out queue to clear");
return -1;
return result;
}
-int hid_open(struct hid_device *hid)
+int usbhid_open(struct hid_device *hid)
{
++hid->open;
if (hid_start_in(hid))
return 0;
}
-void hid_close(struct hid_device *hid)
+void usbhid_close(struct hid_device *hid)
{
+ struct usbhid_device *usbhid = hid->driver_data;
+
if (!--hid->open)
- usb_kill_urb(hid->urbin);
+ usb_kill_urb(usbhid->urbin);
+}
+
+static int hidinput_open(struct input_dev *dev)
+{
+ struct hid_device *hid = dev->private;
+ return usbhid_open(hid);
+}
+
+static void hidinput_close(struct input_dev *dev)
+{
+ struct hid_device *hid = dev->private;
+ usbhid_close(hid);
}
#define USB_VENDOR_ID_PANJIT 0x134c
* Initialize all reports
*/
-void hid_init_reports(struct hid_device *hid)
+void usbhid_init_reports(struct hid_device *hid)
{
struct hid_report *report;
+ struct usbhid_device *usbhid = hid->driver_data;
int err, ret;
list_for_each_entry(report, &hid->report_enum[HID_INPUT_REPORT].report_list, list)
- hid_submit_report(hid, report, USB_DIR_IN);
+ usbhid_submit_report(hid, report, USB_DIR_IN);
list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT].report_list, list)
- hid_submit_report(hid, report, USB_DIR_IN);
+ usbhid_submit_report(hid, report, USB_DIR_IN);
err = 0;
- ret = hid_wait_io(hid);
+ ret = usbhid_wait_io(hid);
while (ret) {
err |= ret;
- if (test_bit(HID_CTRL_RUNNING, &hid->iofl))
- usb_kill_urb(hid->urbctrl);
- if (test_bit(HID_OUT_RUNNING, &hid->iofl))
- usb_kill_urb(hid->urbout);
- ret = hid_wait_io(hid);
+ if (test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
+ usb_kill_urb(usbhid->urbctrl);
+ if (test_bit(HID_OUT_RUNNING, &usbhid->iofl))
+ usb_kill_urb(usbhid->urbout);
+ ret = usbhid_wait_io(hid);
}
if (err)
#define USB_VENDOR_ID_AIRCABLE 0x16CA
#define USB_DEVICE_ID_AIRCABLE1 0x1502
+#define USB_VENDOR_ID_LOGITECH 0x046d
+#define USB_DEVICE_ID_LOGITECH_USB_RECEIVER 0xc101
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
{ USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
-
+
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_USB_RECEIVER, HID_QUIRK_BAD_RELATIVE_KEYS },
+
{ 0, 0 }
};
static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid)
{
- if (!(hid->inbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->inbuf_dma)))
+ struct usbhid_device *usbhid = hid->driver_data;
+
+ if (!(usbhid->inbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_ATOMIC, &usbhid->inbuf_dma)))
return -1;
- if (!(hid->outbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->outbuf_dma)))
+ if (!(usbhid->outbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_ATOMIC, &usbhid->outbuf_dma)))
return -1;
- if (!(hid->cr = usb_buffer_alloc(dev, sizeof(*(hid->cr)), GFP_ATOMIC, &hid->cr_dma)))
+ if (!(usbhid->cr = usb_buffer_alloc(dev, sizeof(*(usbhid->cr)), GFP_ATOMIC, &usbhid->cr_dma)))
return -1;
- if (!(hid->ctrlbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->ctrlbuf_dma)))
+ if (!(usbhid->ctrlbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_ATOMIC, &usbhid->ctrlbuf_dma)))
return -1;
return 0;
static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid)
{
- if (hid->inbuf)
- usb_buffer_free(dev, hid->bufsize, hid->inbuf, hid->inbuf_dma);
- if (hid->outbuf)
- usb_buffer_free(dev, hid->bufsize, hid->outbuf, hid->outbuf_dma);
- if (hid->cr)
- usb_buffer_free(dev, sizeof(*(hid->cr)), hid->cr, hid->cr_dma);
- if (hid->ctrlbuf)
- usb_buffer_free(dev, hid->bufsize, hid->ctrlbuf, hid->ctrlbuf_dma);
+ struct usbhid_device *usbhid = hid->driver_data;
+
+ if (usbhid->inbuf)
+ usb_buffer_free(dev, usbhid->bufsize, usbhid->inbuf, usbhid->inbuf_dma);
+ if (usbhid->outbuf)
+ usb_buffer_free(dev, usbhid->bufsize, usbhid->outbuf, usbhid->outbuf_dma);
+ if (usbhid->cr)
+ usb_buffer_free(dev, sizeof(*(usbhid->cr)), usbhid->cr, usbhid->cr_dma);
+ if (usbhid->ctrlbuf)
+ usb_buffer_free(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma);
}
/*
unsigned quirks = 0, rsize = 0;
char *rdesc;
int n, len, insize = 0;
+ struct usbhid_device *usbhid;
/* Ignore all Wacom devices */
if (le16_to_cpu(dev->descriptor.idVendor) == USB_VENDOR_ID_WACOM)
kfree(rdesc);
hid->quirks = quirks;
- hid->bufsize = HID_MIN_BUFFER_SIZE;
- hid_find_max_report(hid, HID_INPUT_REPORT, &hid->bufsize);
- hid_find_max_report(hid, HID_OUTPUT_REPORT, &hid->bufsize);
- hid_find_max_report(hid, HID_FEATURE_REPORT, &hid->bufsize);
+ if (!(usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL)))
+ goto fail;
+
+ hid->driver_data = usbhid;
+ usbhid->hid = hid;
- if (hid->bufsize > HID_MAX_BUFFER_SIZE)
- hid->bufsize = HID_MAX_BUFFER_SIZE;
+ usbhid->bufsize = HID_MIN_BUFFER_SIZE;
+ hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize);
+ hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize);
+ hid_find_max_report(hid, HID_FEATURE_REPORT, &usbhid->bufsize);
+
+ if (usbhid->bufsize > HID_MAX_BUFFER_SIZE)
+ usbhid->bufsize = HID_MAX_BUFFER_SIZE;
hid_find_max_report(hid, HID_INPUT_REPORT, &insize);
interval = hid_mousepoll_interval;
if (usb_endpoint_dir_in(endpoint)) {
- if (hid->urbin)
+ if (usbhid->urbin)
continue;
- if (!(hid->urbin = usb_alloc_urb(0, GFP_KERNEL)))
+ if (!(usbhid->urbin = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
- usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, insize,
+ usb_fill_int_urb(usbhid->urbin, dev, pipe, usbhid->inbuf, insize,
hid_irq_in, hid, interval);
- hid->urbin->transfer_dma = hid->inbuf_dma;
- hid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ usbhid->urbin->transfer_dma = usbhid->inbuf_dma;
+ usbhid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
} else {
- if (hid->urbout)
+ if (usbhid->urbout)
continue;
- if (!(hid->urbout = usb_alloc_urb(0, GFP_KERNEL)))
+ if (!(usbhid->urbout = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
pipe = usb_sndintpipe(dev, endpoint->bEndpointAddress);
- usb_fill_int_urb(hid->urbout, dev, pipe, hid->outbuf, 0,
+ usb_fill_int_urb(usbhid->urbout, dev, pipe, usbhid->outbuf, 0,
hid_irq_out, hid, interval);
- hid->urbout->transfer_dma = hid->outbuf_dma;
- hid->urbout->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ usbhid->urbout->transfer_dma = usbhid->outbuf_dma;
+ usbhid->urbout->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
}
}
- if (!hid->urbin) {
+ if (!usbhid->urbin) {
err("couldn't find an input interrupt endpoint");
goto fail;
}
init_waitqueue_head(&hid->wait);
- INIT_WORK(&hid->reset_work, hid_reset);
- setup_timer(&hid->io_retry, hid_retry_timeout, (unsigned long) hid);
+ INIT_WORK(&usbhid->reset_work, hid_reset);
+ setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
- spin_lock_init(&hid->inlock);
- spin_lock_init(&hid->outlock);
- spin_lock_init(&hid->ctrllock);
+ spin_lock_init(&usbhid->inlock);
+ spin_lock_init(&usbhid->outlock);
+ spin_lock_init(&usbhid->ctrllock);
hid->version = le16_to_cpu(hdesc->bcdHID);
hid->country = hdesc->bCountryCode;
- hid->dev = dev;
- hid->intf = intf;
- hid->ifnum = interface->desc.bInterfaceNumber;
+ hid->dev = &dev->dev;
+ usbhid->intf = intf;
+ usbhid->ifnum = interface->desc.bInterfaceNumber;
hid->name[0] = 0;
le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
+ hid->bus = BUS_USB;
+ hid->vendor = dev->descriptor.idVendor;
+ hid->product = dev->descriptor.idProduct;
+
usb_make_path(dev, hid->phys, sizeof(hid->phys));
strlcat(hid->phys, "/input", sizeof(hid->phys));
len = strlen(hid->phys);
if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0)
hid->uniq[0] = 0;
- hid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
- if (!hid->urbctrl)
+ usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
+ if (!usbhid->urbctrl)
goto fail;
- usb_fill_control_urb(hid->urbctrl, dev, 0, (void *) hid->cr,
- hid->ctrlbuf, 1, hid_ctrl, hid);
- hid->urbctrl->setup_dma = hid->cr_dma;
- hid->urbctrl->transfer_dma = hid->ctrlbuf_dma;
- hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
+ usb_fill_control_urb(usbhid->urbctrl, dev, 0, (void *) usbhid->cr,
+ usbhid->ctrlbuf, 1, hid_ctrl, hid);
+ usbhid->urbctrl->setup_dma = usbhid->cr_dma;
+ usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma;
+ usbhid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
+ hid->hidinput_input_event = usb_hidinput_input_event;
+ hid->hidinput_open = hidinput_open;
+ hid->hidinput_close = hidinput_close;
+#ifdef CONFIG_USB_HIDDEV
+ hid->hiddev_hid_event = hiddev_hid_event;
+ hid->hiddev_report_event = hiddev_report_event;
+#endif
+#ifdef CONFIG_USB_HIDINPUT_POWERBOOK
+ hid->pb_fnmode = usbhid_pb_fnmode;
+#endif
return hid;
fail:
- usb_free_urb(hid->urbin);
- usb_free_urb(hid->urbout);
- usb_free_urb(hid->urbctrl);
+ usb_free_urb(usbhid->urbin);
+ usb_free_urb(usbhid->urbout);
+ usb_free_urb(usbhid->urbctrl);
hid_free_buffers(dev, hid);
hid_free_device(hid);
static void hid_disconnect(struct usb_interface *intf)
{
struct hid_device *hid = usb_get_intfdata (intf);
+ struct usbhid_device *usbhid;
if (!hid)
return;
- spin_lock_irq(&hid->inlock); /* Sync with error handler */
+ usbhid = hid->driver_data;
+
+ spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
usb_set_intfdata(intf, NULL);
- spin_unlock_irq(&hid->inlock);
- usb_kill_urb(hid->urbin);
- usb_kill_urb(hid->urbout);
- usb_kill_urb(hid->urbctrl);
+ spin_unlock_irq(&usbhid->inlock);
+ usb_kill_urb(usbhid->urbin);
+ usb_kill_urb(usbhid->urbout);
+ usb_kill_urb(usbhid->urbctrl);
- del_timer_sync(&hid->io_retry);
+ del_timer_sync(&usbhid->io_retry);
flush_scheduled_work();
if (hid->claimed & HID_CLAIMED_INPUT)
if (hid->claimed & HID_CLAIMED_HIDDEV)
hiddev_disconnect(hid);
- usb_free_urb(hid->urbin);
- usb_free_urb(hid->urbctrl);
- usb_free_urb(hid->urbout);
+ usb_free_urb(usbhid->urbin);
+ usb_free_urb(usbhid->urbctrl);
+ usb_free_urb(usbhid->urbout);
- hid_free_buffers(hid->dev, hid);
+ hid_free_buffers(to_usb_device(hid->dev), hid);
hid_free_device(hid);
}
if (!(hid = usb_hid_configure(intf)))
return -ENODEV;
- hid_init_reports(hid);
+ usbhid_init_reports(hid);
hid_dump_device(hid);
if (!hidinput_connect(hid))
return -ENODEV;
}
+ /* This only gets called when we are a single-input (most of the
+ * time). IOW, not a HID_QUIRK_MULTI_INPUT. The hid_ff_init() is
+ * only useful in this case, and not for multi-input quirks. */
+ if ((hid->claimed & HID_CLAIMED_INPUT) &&
+ !(hid->quirks & HID_QUIRK_MULTI_INPUT))
+ hid_ff_init(hid);
+
printk(KERN_INFO);
if (hid->claimed & HID_CLAIMED_INPUT)
static int hid_suspend(struct usb_interface *intf, pm_message_t message)
{
struct hid_device *hid = usb_get_intfdata (intf);
+ struct usbhid_device *usbhid = hid->driver_data;
- spin_lock_irq(&hid->inlock); /* Sync with error handler */
- set_bit(HID_SUSPENDED, &hid->iofl);
- spin_unlock_irq(&hid->inlock);
- del_timer(&hid->io_retry);
- usb_kill_urb(hid->urbin);
+ spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
+ set_bit(HID_SUSPENDED, &usbhid->iofl);
+ spin_unlock_irq(&usbhid->inlock);
+ del_timer(&usbhid->io_retry);
+ usb_kill_urb(usbhid->urbin);
dev_dbg(&intf->dev, "suspend\n");
return 0;
}
static int hid_resume(struct usb_interface *intf)
{
struct hid_device *hid = usb_get_intfdata (intf);
+ struct usbhid_device *usbhid = hid->driver_data;
int status;
- clear_bit(HID_SUSPENDED, &hid->iofl);
- hid->retry_delay = 0;
+ clear_bit(HID_SUSPENDED, &usbhid->iofl);
+ usbhid->retry_delay = 0;
status = hid_start_in(hid);
dev_dbg(&intf->dev, "resume status %d\n", status);
return status;
#undef DEBUG
#include <linux/usb.h>
-#include "hid.h"
+#include <linux/hid.h>
/*
* This table contains pointers to initializers. To add support for new
int hid_ff_init(struct hid_device* hid)
{
struct hid_ff_initializer *init;
- int vendor = le16_to_cpu(hid->dev->descriptor.idVendor);
- int product = le16_to_cpu(hid->dev->descriptor.idProduct);
+ int vendor = le16_to_cpu(to_usb_device(hid->dev)->descriptor.idVendor);
+ int product = le16_to_cpu(to_usb_device(hid->dev)->descriptor.idProduct);
for (init = inits; init->idVendor; init++)
if (init->idVendor == vendor && init->idProduct == product)
return init->init(hid);
}
+EXPORT_SYMBOL_GPL(hid_ff_init);
+
#include <linux/input.h>
#include <linux/usb.h>
-#include "hid.h"
+#include <linux/hid.h>
+#include "usbhid.h"
struct device_type {
u16 idVendor;
report->field[0]->value[2] = x;
report->field[0]->value[3] = y;
dbg("(x, y)=(%04x, %04x)", x, y);
- hid_submit_report(hid, report, USB_DIR_OUT);
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
break;
case FF_RUMBLE:
report->field[0]->value[2] = left;
report->field[0]->value[3] = right;
dbg("(left, right)=(%04x, %04x)", left, right);
- hid_submit_report(hid, report, USB_DIR_OUT);
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
break;
}
return 0;
#include <linux/input.h>
#include <linux/usb.h>
-#include "hid.h"
+#include <linux/hid.h>
+
+#include "usbhid.h"
#define PID_EFFECTS_MAX 64
debug("attack %u => %d", envelope->attack_level,
pidff->set_envelope[PID_ATTACK_LEVEL].value[0]);
- hid_submit_report(pidff->hid, pidff->reports[PID_SET_ENVELOPE],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_ENVELOPE],
USB_DIR_OUT);
}
pidff_set_signed(&pidff->set_constant[PID_MAGNITUDE],
effect->u.constant.level);
- hid_submit_report(pidff->hid, pidff->reports[PID_SET_CONSTANT],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_CONSTANT],
USB_DIR_OUT);
}
pidff->effect_direction);
pidff->set_effect[PID_START_DELAY].value[0] = effect->replay.delay;
- hid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
USB_DIR_OUT);
}
pidff_set(&pidff->set_periodic[PID_PHASE], effect->u.periodic.phase);
pidff->set_periodic[PID_PERIOD].value[0] = effect->u.periodic.period;
- hid_submit_report(pidff->hid, pidff->reports[PID_SET_PERIODIC],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_PERIODIC],
USB_DIR_OUT);
}
effect->u.condition[i].left_saturation);
pidff_set(&pidff->set_condition[PID_DEAD_BAND],
effect->u.condition[i].deadband);
- hid_wait_io(pidff->hid);
- hid_submit_report(pidff->hid, pidff->reports[PID_SET_CONDITION],
+ usbhid_wait_io(pidff->hid);
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_CONDITION],
USB_DIR_OUT);
}
}
effect->u.ramp.start_level);
pidff_set_signed(&pidff->set_ramp[PID_RAMP_END],
effect->u.ramp.end_level);
- hid_submit_report(pidff->hid, pidff->reports[PID_SET_RAMP],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_RAMP],
USB_DIR_OUT);
}
int j;
pidff->create_new_effect_type->value[0] = efnum;
- hid_submit_report(pidff->hid, pidff->reports[PID_CREATE_NEW_EFFECT],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_CREATE_NEW_EFFECT],
USB_DIR_OUT);
debug("create_new_effect sent, type: %d", efnum);
pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] = 0;
pidff->block_load_status->value[0] = 0;
- hid_wait_io(pidff->hid);
+ usbhid_wait_io(pidff->hid);
for (j = 0; j < 60; j++) {
debug("pid_block_load requested");
- hid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_LOAD],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_LOAD],
USB_DIR_IN);
- hid_wait_io(pidff->hid);
+ usbhid_wait_io(pidff->hid);
if (pidff->block_load_status->value[0] ==
pidff->status_id[PID_BLOCK_LOAD_SUCCESS]) {
debug("device reported free memory: %d bytes",
pidff->effect_operation[PID_LOOP_COUNT].value[0] = n;
}
- hid_wait_io(pidff->hid);
- hid_submit_report(pidff->hid, pidff->reports[PID_EFFECT_OPERATION],
+ usbhid_wait_io(pidff->hid);
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_EFFECT_OPERATION],
USB_DIR_OUT);
}
static void pidff_erase_pid(struct pidff_device *pidff, int pid_id)
{
pidff->block_free[PID_EFFECT_BLOCK_INDEX].value[0] = pid_id;
- hid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_FREE],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_FREE],
USB_DIR_OUT);
}
struct pidff_device *pidff = dev->ff->private;
pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], gain);
- hid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN],
USB_DIR_OUT);
}
pidff_set(&pidff->set_effect[PID_GAIN], magnitude);
pidff->set_effect[PID_START_DELAY].value[0] = 0;
- hid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
USB_DIR_OUT);
}
pidff->device_control->value[0] = pidff->control_id[PID_RESET];
/* We reset twice as sometimes hid_wait_io isn't waiting long enough */
- hid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
- hid_wait_io(hid);
- hid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
- hid_wait_io(hid);
+ usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
+ usbhid_wait_io(hid);
+ usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
+ usbhid_wait_io(hid);
pidff->device_control->value[0] =
pidff->control_id[PID_ENABLE_ACTUATORS];
- hid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
- hid_wait_io(hid);
+ usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT);
+ usbhid_wait_io(hid);
/* pool report is sometimes messed up, refetch it */
- hid_submit_report(hid, pidff->reports[PID_POOL], USB_DIR_IN);
- hid_wait_io(hid);
+ usbhid_submit_report(hid, pidff->reports[PID_POOL], USB_DIR_IN);
+ usbhid_wait_io(hid);
if (pidff->pool[PID_SIMULTANEOUS_MAX].value) {
int sim_effects = pidff->pool[PID_SIMULTANEOUS_MAX].value[0];
break;
}
debug("pid_pool requested again");
- hid_submit_report(hid, pidff->reports[PID_POOL],
+ usbhid_submit_report(hid, pidff->reports[PID_POOL],
USB_DIR_IN);
- hid_wait_io(hid);
+ usbhid_wait_io(hid);
}
}
}
if (test_bit(FF_GAIN, dev->ffbit)) {
pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], 0xffff);
- hid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN],
+ usbhid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN],
USB_DIR_OUT);
}
#undef DEBUG
#include <linux/usb.h>
-#include "hid.h"
+#include <linux/hid.h>
+#include "usbhid.h"
/* Usages for thrustmaster devices I know about */
#define THRUSTMASTER_USAGE_RUMBLE_LR (HID_UP_GENDESK | 0xbb)
tmff->rumble->value[0] = left;
tmff->rumble->value[1] = right;
dbg("(left,right)=(%08x, %08x)", left, right);
- hid_submit_report(hid, tmff->report, USB_DIR_OUT);
+ usbhid_submit_report(hid, tmff->report, USB_DIR_OUT);
return 0;
}
#include <linux/input.h>
#include <linux/usb.h>
-#include "hid.h"
+#include <linux/hid.h>
+#include "usbhid.h"
struct zpff_device {
struct hid_report *report;
zpff->report->field[2]->value[0] = left;
zpff->report->field[3]->value[0] = right;
debug("running with 0x%02x 0x%02x", left, right);
- hid_submit_report(hid, zpff->report, USB_DIR_OUT);
+ usbhid_submit_report(hid, zpff->report, USB_DIR_OUT);
return 0;
}
zpff->report->field[1]->value[0] = 0x02;
zpff->report->field[2]->value[0] = 0x00;
zpff->report->field[3]->value[0] = 0x00;
- hid_submit_report(hid, zpff->report, USB_DIR_OUT);
+ usbhid_submit_report(hid, zpff->report, USB_DIR_OUT);
printk(KERN_INFO "Force feedback for Zeroplus based devices by "
"Anssi Hannula <anssi.hannula@gmail.com>\n");
#include <linux/smp_lock.h>
#include <linux/input.h>
#include <linux/usb.h>
-#include "hid.h"
+#include <linux/hid.h>
#include <linux/hiddev.h>
+#include "usbhid.h"
#ifdef CONFIG_USB_DYNAMIC_MINORS
#define HIDDEV_MINOR_BASE 0
hiddev_send_event(hid, &uref);
}
-
+EXPORT_SYMBOL_GPL(hiddev_hid_event);
void hiddev_report_event(struct hid_device *hid, struct hid_report *report)
{
hiddev_send_event(hid, &uref);
}
+
/*
* fasync file op
*/
if (!--list->hiddev->open) {
if (list->hiddev->exist)
- hid_close(list->hiddev->hid);
+ usbhid_close(list->hiddev->hid);
else
kfree(list->hiddev);
}
if (!list->hiddev->open++)
if (list->hiddev->exist)
- hid_open(hiddev_table[i]->hid);
+ usbhid_open(hiddev_table[i]->hid);
return 0;
}
struct hiddev_list *list = file->private_data;
struct hiddev *hiddev = list->hiddev;
struct hid_device *hid = hiddev->hid;
- struct usb_device *dev = hid->dev;
+ struct usb_device *dev = to_usb_device(hid->dev);
struct hiddev_collection_info cinfo;
struct hiddev_report_info rinfo;
struct hiddev_field_info finfo;
struct hiddev_devinfo dinfo;
struct hid_report *report;
struct hid_field *field;
+ struct usbhid_device *usbhid = hid->driver_data;
void __user *user_arg = (void __user *)arg;
int i;
dinfo.bustype = BUS_USB;
dinfo.busnum = dev->bus->busnum;
dinfo.devnum = dev->devnum;
- dinfo.ifnum = hid->ifnum;
+ dinfo.ifnum = usbhid->ifnum;
dinfo.vendor = le16_to_cpu(dev->descriptor.idVendor);
dinfo.product = le16_to_cpu(dev->descriptor.idProduct);
dinfo.version = le16_to_cpu(dev->descriptor.bcdDevice);
}
case HIDIOCINITREPORT:
- hid_init_reports(hid);
+ usbhid_init_reports(hid);
return 0;
if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
return -EINVAL;
- hid_submit_report(hid, report, USB_DIR_IN);
- hid_wait_io(hid);
+ usbhid_submit_report(hid, report, USB_DIR_IN);
+ usbhid_wait_io(hid);
return 0;
if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
return -EINVAL;
- hid_submit_report(hid, report, USB_DIR_OUT);
- hid_wait_io(hid);
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
+ usbhid_wait_io(hid);
return 0;
int hiddev_connect(struct hid_device *hid)
{
struct hiddev *hiddev;
+ struct usbhid_device *usbhid = hid->driver_data;
int i;
int retval;
if (!(hiddev = kzalloc(sizeof(struct hiddev), GFP_KERNEL)))
return -1;
- retval = usb_register_dev(hid->intf, &hiddev_class);
+ retval = usb_register_dev(usbhid->intf, &hiddev_class);
if (retval) {
err("Not able to get a minor for this device.");
kfree(hiddev);
hiddev->hid = hid;
hiddev->exist = 1;
- hid->minor = hid->intf->minor;
+ hid->minor = usbhid->intf->minor;
hid->hiddev = hiddev;
- hiddev_table[hid->intf->minor - HIDDEV_MINOR_BASE] = hiddev;
+ hiddev_table[usbhid->intf->minor - HIDDEV_MINOR_BASE] = hiddev;
return 0;
}
void hiddev_disconnect(struct hid_device *hid)
{
struct hiddev *hiddev = hid->hiddev;
+ struct usbhid_device *usbhid = hid->driver_data;
hiddev->exist = 0;
hiddev_table[hiddev->hid->minor - HIDDEV_MINOR_BASE] = NULL;
- usb_deregister_dev(hiddev->hid->intf, &hiddev_class);
+ usb_deregister_dev(usbhid->intf, &hiddev_class);
if (hiddev->open) {
- hid_close(hiddev->hid);
+ usbhid_close(hiddev->hid);
wake_up_interruptible(&hiddev->wait);
} else {
kfree(hiddev);
--- /dev/null
+#ifndef __USBHID_H
+#define __USBHID_H
+
+/*
+ * Copyright (c) 1999 Andreas Gal
+ * Copyright (c) 2000-2001 Vojtech Pavlik
+ * Copyright (c) 2006 Jiri Kosina
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/input.h>
+
+/* API provided by hid-core.c for USB HID drivers */
+int usbhid_wait_io(struct hid_device* hid);
+void usbhid_close(struct hid_device *hid);
+int usbhid_open(struct hid_device *hid);
+void usbhid_init_reports(struct hid_device *hid);
+void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir);
+
+/*
+ * USB-specific HID struct, to be pointed to
+ * from struct hid_device->driver_data
+ */
+
+struct usbhid_device {
+ struct hid_device *hid; /* pointer to corresponding HID dev */
+
+ struct usb_interface *intf; /* USB interface */
+ int ifnum; /* USB interface number */
+
+ unsigned int bufsize; /* URB buffer size */
+
+ struct urb *urbin; /* Input URB */
+ char *inbuf; /* Input buffer */
+ dma_addr_t inbuf_dma; /* Input buffer dma */
+ spinlock_t inlock; /* Input fifo spinlock */
+
+ struct urb *urbctrl; /* Control URB */
+ struct usb_ctrlrequest *cr; /* Control request struct */
+ dma_addr_t cr_dma; /* Control request struct dma */
+ struct hid_control_fifo ctrl[HID_CONTROL_FIFO_SIZE]; /* Control fifo */
+ unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */
+ char *ctrlbuf; /* Control buffer */
+ dma_addr_t ctrlbuf_dma; /* Control buffer dma */
+ spinlock_t ctrllock; /* Control fifo spinlock */
+
+ struct urb *urbout; /* Output URB */
+ struct hid_report *out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */
+ unsigned char outhead, outtail; /* Output pipe fifo head & tail */
+ char *outbuf; /* Output buffer */
+ dma_addr_t outbuf_dma; /* Output buffer dma */
+ spinlock_t outlock; /* Output fifo spinlock */
+
+ unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
+ struct timer_list io_retry; /* Retry timer */
+ unsigned long stop_retry; /* Time to give up, in jiffies */
+ unsigned int retry_delay; /* Delay length in ms */
+ struct work_struct reset_work; /* Task context for resets */
+
+};
+
+#endif
+
/* Register backlight device */
snprintf(bl_name, sizeof(bl_name), "appledisplay%d",
atomic_inc_return(&count_displays) - 1);
- pdata->bd = backlight_device_register(bl_name, pdata,
+ pdata->bd = backlight_device_register(bl_name, NULL, NULL,
&appledisplay_bl_data);
if (IS_ERR(pdata->bd)) {
err("appledisplay: Backlight registration failed");
bep->bufp = kmalloc (bufsize, GFP_KERNEL);
if (!bep->bufp)
goto bl_fail;
- bep->dr = (struct usb_ctrlrequest *) kmalloc (sizeof (struct usb_ctrlrequest), GFP_KERNEL);
+ bep->dr = kmalloc(sizeof (struct usb_ctrlrequest), GFP_KERNEL);
if (!bep->dr)
goto bl_fail;
bep->urbp = usb_alloc_urb (0, GFP_KERNEL);
info("device is a %s", cp->dev_desc);
/* get the maximum allowed control transfer length */
- pbuf = (__le16 *) kmalloc (2, GFP_KERNEL); /* use an allocated buffer because of urb target */
+ pbuf = kmalloc(2, GFP_KERNEL); /* use an allocated buffer because of urb target */
if (!pbuf) {
err( "out of memory");
goto pfail;
case SISUSB_GET_CONFIG:
case SISUSB_COMMAND:
lock_kernel();
- retval = sisusb_ioctl(f->f_dentry->d_inode, f, cmd, arg);
+ retval = sisusb_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
unlock_kernel();
return retval;
/*
* Allocate parport interface
*/
- if (!(priv = kcalloc(sizeof(struct parport_uss720_private), 1, GFP_KERNEL))) {
+ if (!(priv = kzalloc(sizeof(struct parport_uss720_private), GFP_KERNEL))) {
usb_put_dev(usbdev);
return -ENOMEM;
}
struct rndis_halt *halt;
/* try to clear any rndis state/activity (no i/o from stack!) */
- halt = kcalloc(1, sizeof *halt, GFP_KERNEL);
+ halt = kzalloc(sizeof *halt, GFP_KERNEL);
if (halt) {
halt->msg_type = RNDIS_MSG_HALT;
halt->msg_len = ccpu2(sizeof *halt);
}
static void ark3116_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct ark3116_private *priv = usb_get_serial_port_data(port);
static int ark3116_open(struct usb_serial_port *port, struct file *filp)
{
- struct termios tmp_termios;
+ struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
char *buf;
int result = 0;
static int belkin_sa_open (struct usb_serial_port *port, struct file *filp);
static void belkin_sa_close (struct usb_serial_port *port, struct file *filp);
static void belkin_sa_read_int_callback (struct urb *urb);
-static void belkin_sa_set_termios (struct usb_serial_port *port, struct termios * old);
+static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios * old);
static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
static void belkin_sa_break_ctl (struct usb_serial_port *port, int break_state );
static int belkin_sa_tiocmget (struct usb_serial_port *port, struct file *file);
__FUNCTION__, retval);
}
-static void belkin_sa_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct belkin_sa_private *priv = usb_get_serial_port_data(port);
struct usb_serial_port *port;
int retval = 0;
struct tty_struct *tty;
- struct termios *termios;
+ struct ktermios *termios;
dbg ("%s", __FUNCTION__);
static void cp2101_cleanup(struct usb_serial_port*);
static void cp2101_close(struct usb_serial_port*, struct file*);
static void cp2101_get_termios(struct usb_serial_port*);
-static void cp2101_set_termios(struct usb_serial_port*, struct termios*);
+static void cp2101_set_termios(struct usb_serial_port*, struct ktermios*);
static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
unsigned int, unsigned int);
}
static void cp2101_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
unsigned int cflag, old_cflag=0;
int baud=0, bits;
wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
- struct termios tmp_termios; /* stores the old termios settings */
+ struct ktermios tmp_termios; /* stores the old termios settings */
};
/* write buffer structure */
static void cypress_send (struct usb_serial_port *port);
static int cypress_write_room (struct usb_serial_port *port);
static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void cypress_set_termios (struct usb_serial_port *port, struct termios * old);
+static void cypress_set_termios (struct usb_serial_port *port, struct ktermios * old);
static int cypress_tiocmget (struct usb_serial_port *port, struct file *file);
static int cypress_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
static int cypress_chars_in_buffer (struct usb_serial_port *port);
switch (cmd) {
case TIOCGSERIAL:
- if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
+ if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct ktermios))) {
return -EFAULT;
}
return (0);
break;
case TIOCSSERIAL:
- if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
+ if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct ktermios))) {
return -EFAULT;
}
/* here we need to call cypress_set_termios to invoke the new settings */
static void cypress_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
if (size == 0)
return NULL;
- cb = (struct cypress_buf *)kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
+ cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
if (cb == NULL)
return NULL;
static void digi_rx_throttle (struct usb_serial_port *port);
static void digi_rx_unthrottle (struct usb_serial_port *port);
static void digi_set_termios( struct usb_serial_port *port,
- struct termios *old_termios );
+ struct ktermios *old_termios );
static void digi_break_ctl( struct usb_serial_port *port, int break_state );
static int digi_ioctl( struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg );
static void digi_set_termios( struct usb_serial_port *port,
- struct termios *old_termios )
+ struct ktermios *old_termios )
{
struct digi_port *priv = usb_get_serial_port_data(port);
int ret;
unsigned char buf[32];
struct digi_port *priv = usb_get_serial_port_data(port);
- struct termios not_termios;
+ struct ktermios not_termios;
unsigned long flags = 0;
for( i=0; i<serial->type->num_ports+1; i++ ) {
/* allocate port private structure */
- priv = (struct digi_port *)kmalloc( sizeof(struct digi_port),
+ priv = kmalloc( sizeof(struct digi_port),
GFP_KERNEL );
if( priv == (struct digi_port *)0 ) {
while( --i >= 0 )
}
/* allocate serial private structure */
- serial_priv = (struct digi_serial *)kmalloc( sizeof(struct digi_serial),
+ serial_priv = kmalloc( sizeof(struct digi_serial),
GFP_KERNEL );
if( serial_priv == (struct digi_serial *)0 ) {
for( i=0; i<serial->type->num_ports+1; i++ )
struct file * file,
unsigned int cmd,
unsigned long arg);
-static void empeg_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static void empeg_write_bulk_callback (struct urb *urb);
static void empeg_read_bulk_callback (struct urb *urb);
}
-static void empeg_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
dbg("%s - port %d", __FUNCTION__, port->number);
static void ftdi_write_bulk_callback (struct urb *urb);
static void ftdi_read_bulk_callback (struct urb *urb);
static void ftdi_process_read (struct work_struct *work);
-static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old);
+static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios * old);
static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file);
static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
* WARNING: set_termios calls this with old_termios in kernel space
*/
-static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{ /* ftdi_termios */
struct usb_device *dev = port->serial->dev;
unsigned int cflag = port->tty->termios->c_cflag;
static int edge_chars_in_buffer (struct usb_serial_port *port);
static void edge_throttle (struct usb_serial_port *port);
static void edge_unthrottle (struct usb_serial_port *port);
-static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
static void edge_break (struct usb_serial_port *port, int break_state);
static int edge_tiocmget (struct usb_serial_port *port, struct file *file);
static int send_iosp_ext_cmd (struct edgeport_port *edge_port, __u8 command, __u8 param);
static int calc_baud_rate_divisor (int baud_rate, int *divisor);
static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate);
-static void change_port_settings (struct edgeport_port *edge_port, struct termios *old_termios);
+static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios);
static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue);
static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int writeLength);
static void send_more_port_data (struct edgeport_serial *edge_serial, struct edgeport_port *edge_port);
* SerialSetTermios
* this function is called by the tty driver when it wants to change the termios structure
*****************************************************************************/
-static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct tty_struct *tty = port->tty;
#ifndef CMSPAR
#define CMSPAR 0
#endif
-static void change_port_settings (struct edgeport_port *edge_port, struct termios *old_termios)
+static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios)
{
struct tty_struct *tty;
int baud;
static void stop_read(struct edgeport_port *edge_port);
static int restart_read(struct edgeport_port *edge_port);
-static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static void edge_send(struct usb_serial_port *port);
/* circular buffer */
return status;
}
-static void change_port_settings (struct edgeport_port *edge_port, struct termios *old_termios)
+static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios)
{
struct ump_uart_config *config;
struct tty_struct *tty;
return;
}
-static void edge_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct tty_struct *tty = port->tty;
if (size == 0)
return NULL;
- eb = (struct edge_buf *)kmalloc(sizeof(struct edge_buf), GFP_KERNEL);
+ eb = kmalloc(sizeof(struct edge_buf), GFP_KERNEL);
if (eb == NULL)
return NULL;
bytes_in = 0;
bytes_out = 0;
- priv = (struct ipaq_private *)kmalloc(sizeof(struct ipaq_private), GFP_KERNEL);
+ priv = kmalloc(sizeof(struct ipaq_private), GFP_KERNEL);
if (priv == NULL) {
err("%s - Out of memory", __FUNCTION__);
return -ENOMEM;
static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int count);
static void ir_write_bulk_callback (struct urb *urb);
static void ir_read_bulk_callback (struct urb *urb);
-static void ir_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static u8 ir_baud = 0;
static u8 ir_xbof = 0;
return;
}
-static void ir_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
unsigned char *transfer_buffer;
unsigned int cflag;
static void keyspan_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
int baud_rate, device_port;
struct keyspan_port_private *p_priv;
unsigned int cmd,
unsigned long arg);
static void keyspan_set_termios (struct usb_serial_port *port,
- struct termios *old);
+ struct ktermios *old);
static void keyspan_break_ctl (struct usb_serial_port *port,
int break_state);
static int keyspan_tiocmget (struct usb_serial_port *port,
static void keyspan_pda_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
unsigned int cflag = port->tty->termios->c_cflag;
static void klsi_105_read_bulk_callback (struct urb *urb);
static void klsi_105_set_termios (struct usb_serial_port *port,
- struct termios * old);
+ struct ktermios *old);
static int klsi_105_ioctl (struct usb_serial_port *port,
struct file * file,
unsigned int cmd,
#define URB_TRANSFER_BUFFER_SIZE 64
struct klsi_105_private {
struct klsi_105_port_settings cfg;
- struct termios termios;
+ struct ktermios termios;
unsigned long line_state; /* modem line settings */
/* write pool */
struct urb * write_urb_pool[NUM_URBS];
static void klsi_105_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
unsigned int iflag = port->tty->termios->c_iflag;
int cur_pos; // index of the next char to send in buf
__u16 device_type;
int line_state;
- struct termios internal_termios;
+ struct ktermios internal_termios;
};
}
// allocate memory for write_urb transfer buffer
- port->write_urb->transfer_buffer = (unsigned char *) kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL);
+ port->write_urb->transfer_buffer = kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL);
if (! port->write_urb->transfer_buffer) {
kfree(transfer_buffer);
usb_free_urb(port->write_urb);
switch (cmd) {
case TCGETS: // 0x5401
- if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct termios))) {
+ if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct ktermios))) {
dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
return -EFAULT;
}
- if (kernel_termios_to_user_termios((struct termios __user *)arg,
+ if (kernel_termios_to_user_termios((struct ktermios __user *)arg,
&priv->internal_termios))
return -EFAULT;
return 0;
dbg("%s - port %d Error: port->tty->termios is NULL", __FUNCTION__, port->number);
return -ENOTTY;
}
- if (!access_ok(VERIFY_READ, user_arg, sizeof(struct termios))) {
+ if (!access_ok(VERIFY_READ, user_arg, sizeof(struct ktermios))) {
dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
return -EFAULT;
}
if (user_termios_to_kernel_termios(&priv->internal_termios,
- (struct termios __user *)arg))
+ (struct ktermios __user *)arg))
return -EFAULT;
settings = kzalloc(50, GFP_KERNEL);
return 0;
case TCFLSH: // 0x540B
- transfer_buffer = (unsigned char *) kmalloc(transfer_buffer_length, GFP_KERNEL);
+ transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
if (! transfer_buffer) {
return -ENOBUFS;
}
struct file *filp);
static void mct_u232_read_int_callback (struct urb *urb);
static void mct_u232_set_termios (struct usb_serial_port *port,
- struct termios * old);
+ struct ktermios * old);
static int mct_u232_ioctl (struct usb_serial_port *port,
struct file * file,
unsigned int cmd,
} /* mct_u232_read_int_callback */
static void mct_u232_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
* the specified new settings.
*/
static void change_port_settings(struct moschip_port *mos7720_port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial_port *port;
struct usb_serial *serial;
* termios structure.
*/
static void mos7720_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
int status;
unsigned int cflag;
*****************************************************************************/
static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct tty_struct *tty;
int baud;
*****************************************************************************/
static void mos7840_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
int status;
unsigned int cflag;
static int option_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg);
static void option_set_termios(struct usb_serial_port *port,
- struct termios *old);
+ struct ktermios *old);
static void option_break_ctl(struct usb_serial_port *port, int break_state);
static int option_tiocmget(struct usb_serial_port *port, struct file *file);
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
}
static void option_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
dbg("%s", __FUNCTION__);
if (size == 0)
return NULL;
- pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
+ pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
if (pb == NULL)
return NULL;
}
static void pl2303_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
static int pl2303_open(struct usb_serial_port *port, struct file *filp)
{
- struct termios tmp_termios;
+ struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
}
static void sierra_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
dbg("%s", __FUNCTION__);
static void ti_unthrottle(struct usb_serial_port *port);
static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
static void ti_set_termios(struct usb_serial_port *port,
- struct termios *old_termios);
+ struct ktermios *old_termios);
static int ti_tiocmget(struct usb_serial_port *port, struct file *file);
static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear);
static void ti_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct ti_port *tport = usb_get_serial_port_data(port);
struct tty_struct *tty = port->tty;
{
struct circ_buf *cb;
- cb = (struct circ_buf *)kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
+ cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
if (cb == NULL)
return NULL;
return retval;
}
-static void serial_set_termios (struct tty_struct *tty, struct termios * old)
+static void serial_set_termios (struct tty_struct *tty, struct ktermios * old)
{
struct usb_serial_port *port = tty->driver_data;
static int visor_calc_num_ports(struct usb_serial *serial);
static void visor_shutdown (struct usb_serial *serial);
static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios);
+static void visor_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static void visor_write_bulk_callback (struct urb *urb);
static void visor_read_bulk_callback (struct urb *urb);
static void visor_read_int_callback (struct urb *urb);
/* This function is all nice and good, but we don't change anything based on it :) */
-static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void visor_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
unsigned int cflag;
static int whiteheat_write (struct usb_serial_port *port, const unsigned char *buf, int count);
static int whiteheat_write_room (struct usb_serial_port *port);
static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void whiteheat_set_termios (struct usb_serial_port *port, struct termios * old);
+static void whiteheat_set_termios (struct usb_serial_port *port, struct ktermios * old);
static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file);
static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
static void whiteheat_break_ctl (struct usb_serial_port *port, int break_state);
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
- info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
+ info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
if (info == NULL) {
err("%s: Out of memory for port structures\n", serial->type->description);
goto no_private;
usb_set_serial_port_data(port, info);
}
- command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
+ command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
if (command_info == NULL) {
err("%s: Out of memory for port structures\n", serial->type->description);
goto no_command_private;
static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
{
int retval = 0;
- struct termios old_term;
+ struct ktermios old_term;
dbg("%s - port %d", __FUNCTION__, port->number);
}
-static void whiteheat_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void whiteheat_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
dbg("%s -port %d", __FUNCTION__, port->number);
return result;
}
- buf = (unsigned char *) kmalloc(bulklen, GFP_NOIO);
+ buf = kmalloc(bulklen, GFP_NOIO);
if (!buf)
return -ENOMEM;
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select BITREVERSE
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VIDEO_SELECT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select BITREVERSE
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select BITREVERSE
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
---help---
Say Y here to enable support for PNX4008 RGB Framebuffer
+config FB_IBM_GXT4500
+ tristate "Framebuffer support for IBM GXT4500P adaptor"
+ depends on PPC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here to enable support for the IBM GXT4500P display
+ adaptor, found on some IBM System P (pSeries) machines.
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
obj-$(CONFIG_FB_PNX4008_DUM) += pnx4008/
obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/
+obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
# Platform or fallback drivers go here
obj-$(CONFIG_FB_VESA) += vesafb.o
#endif
fb_info.flags = FBINFO_FLAG_DEFAULT;
- if (register_framebuffer(&fb_info) < 0)
- return;
+ if (register_framebuffer(&fb_info) < 0) {
+ iounmap(fb_info.screen_base);
+ fb_info.screen_base = NULL;
+ return;
+ }
printk("fb%d: S3 Trio frame buffer device on %s\n",
fb_info.node, dp->full_name);
goto out;
}
- fb = (struct clcd_fb *) kmalloc(sizeof(struct clcd_fb), GFP_KERNEL);
+ fb = kmalloc(sizeof(struct clcd_fb), GFP_KERNEL);
if (!fb) {
printk(KERN_INFO "CLCD: could not allocate new clcd_fb struct\n");
ret = -ENOMEM;
fb_info.fix.smem_len);
if (!videomemory) {
printk("amifb: WARNING! unable to map videomem cached writethrough\n");
- videomemory = ZTWO_VADDR(fb_info.fix.smem_start);
- }
+ fb_info.screen_base = (char *)ZTWO_VADDR(fb_info.fix.smem_start);
+ } else
+ fb_info.screen_base = (char *)videomemory;
- fb_info.screen_base = (char *)videomemory;
memset(dummysprite, 0, DUMMYSPRITEMEMSIZE);
/*
{
fb_dealloc_cmap(&fb_info.cmap);
chipfree();
+ if (videomemory)
+ iounmap((void*)videomemory);
release_mem_region(CUSTOM_PHYSADDR+0xe0, 0x120);
custom.dmacon = DMAF_ALL | DMAF_MASTER;
}
par->crsr.spot_x = par->crsr.spot_y = 0;
par->crsr.height = par->crsr.width = 0;
-#if 0 /* fbmon not done. uncomment for 2.5.x -brad */
- if (!fbmon_valid_timings(pixclock[clk_shift], htotal, vtotal,
- &fb_info)) {
- DPRINTK("mode doesn't fit for monitor\n");
- return -EINVAL;
- }
-#endif
-
return 0;
}
unsigned int xres;
p = *ppos;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
fbidx = iminor(inode);
info = registered_fb[fbidx];
atafb_set_disp(-1, &fb_info);
do_install_cmap(0, &fb_info);
- if (register_framebuffer(&fb_info) < 0)
+ if (register_framebuffer(&fb_info) < 0) {
+#ifdef ATAFB_EXT
+ if (external_addr) {
+ iounmap(external_addr);
+ external_addr = NULL;
+ }
+ if (external_vgaiobase) {
+ iounmap((void*)external_vgaiobase);
+ external_vgaiobase = 0;
+ }
+#endif
return -EINVAL;
+ }
printk("Determined %dx%d, depth %d\n",
disp.var.xres, disp.var.yres, disp.var.bits_per_pixel);
if (vclk * 12 < c.ppll_min)
vclk = c.ppll_min/12;
+ pll->post_divider = -1;
+
/* now, find an acceptable divider */
for (i = 0; i < sizeof(post_dividers); i++) {
output_freq = post_dividers[i] * vclk;
}
}
+ if (pll->post_divider < 0)
+ return -EINVAL;
+
/* calculate feedback divider */
n = c.ref_divider * output_freq;
d = c.ref_clk;
snprintf(name, sizeof(name), "aty128bl%d", info->node);
- bd = backlight_device_register(name, par, &aty128_bl_data);
+ bd = backlight_device_register(name, info->dev, par, &aty128_bl_data);
if (IS_ERR(bd)) {
info->bl_dev = NULL;
printk(KERN_WARNING "aty128: Backlight registration failed\n");
*/
struct atyfb_par {
- struct aty_cmap_regs __iomem *aty_cmap_regs;
struct { u8 red, green, blue; } palette[256];
const struct aty_dac_ops *dac_ops;
const struct aty_pll_ops *pll_ops;
int mtrr_aper;
int mtrr_reg;
#endif
+ u32 mem_cntl;
};
/*
regindex -= 0x800;
#ifdef CONFIG_ATARI
- return in_le32((volatile u32 *)(par->ati_regbase + regindex));
+ return in_le32(par->ati_regbase + regindex);
#else
return readl(par->ati_regbase + regindex);
#endif
regindex -= 0x800;
#ifdef CONFIG_ATARI
- out_le32((volatile u32 *)(par->ati_regbase + regindex), val);
+ out_le32(par->ati_regbase + regindex, val);
#else
writel(val, par->ati_regbase + regindex);
#endif
if (regindex >= 0x400)
regindex -= 0x800;
#ifdef CONFIG_ATARI
- out_le16((volatile u16 *)(par->ati_regbase + regindex), val);
+ out_le16(par->ati_regbase + regindex, val);
#else
writel(val, par->ati_regbase + regindex);
#endif
void (*set_pll) (const struct fb_info * info, const union aty_pll * pll);
void (*get_pll) (const struct fb_info *info, union aty_pll * pll);
int (*init_pll) (const struct fb_info * info, union aty_pll * pll);
+ void (*resume_pll)(const struct fb_info *info, union aty_pll *pll);
};
extern const struct aty_pll_ops aty_pll_ati18818_1; /* ATI 18818 */
* The Hardware parameters for each card
*/
-struct aty_cmap_regs {
- u8 windex;
- u8 lut;
- u8 mask;
- u8 rindex;
- u8 cntl;
-};
-
struct pci_mmap_map {
unsigned long voff;
unsigned long poff;
* Internal routines
*/
-static int aty_init(struct fb_info *info, const char *name);
+static int aty_init(struct fb_info *info);
+static void aty_resume_chip(struct fb_info *info);
#ifdef CONFIG_ATARI
static int store_video_par(char *videopar, unsigned char m64_num);
#endif
else
info->var.accel_flags = 0;
-#if 0 /* fbmon is not done. uncomment for 2.5.x -brad */
- if (!fbmon_valid_timings(pixclock, htotal, vtotal, info))
- return -EINVAL;
-#endif
aty_crtc_to_var(&crtc, var);
var->pixclock = par->pll_ops->pll_to_var(info, &pll);
return 0;
aty_st_8(DAC_CNTL, tmp, par);
aty_st_8(DAC_MASK, 0xff, par);
- writeb(i, &par->aty_cmap_regs->rindex);
- atyfb_save.r[enter][i] = readb(&par->aty_cmap_regs->lut);
- atyfb_save.g[enter][i] = readb(&par->aty_cmap_regs->lut);
- atyfb_save.b[enter][i] = readb(&par->aty_cmap_regs->lut);
- writeb(i, &par->aty_cmap_regs->windex);
- writeb(atyfb_save.r[1 - enter][i],
- &par->aty_cmap_regs->lut);
- writeb(atyfb_save.g[1 - enter][i],
- &par->aty_cmap_regs->lut);
- writeb(atyfb_save.b[1 - enter][i],
- &par->aty_cmap_regs->lut);
+ aty_st_8(DAC_R_INDEX, i, par);
+ atyfb_save.r[enter][i] = aty_ld_8(DAC_DATA, par);
+ atyfb_save.g[enter][i] = aty_ld_8(DAC_DATA, par);
+ atyfb_save.b[enter][i] = aty_ld_8(DAC_DATA, par);
+ aty_st_8(DAC_W_INDEX, i, par);
+ aty_st_8(DAC_DATA, atyfb_save.r[1 - enter][i], par);
+ aty_st_8(DAC_DATA, atyfb_save.g[1 - enter][i], par);
+ aty_st_8(DAC_DATA, atyfb_save.b[1 - enter][i], par);
}
}
#if defined(CONFIG_PM) && defined(CONFIG_PCI)
+#ifdef CONFIG_PPC_PMAC
/* Power management routines. Those are used for PowerBook sleep.
*/
static int aty_power_mgmt(int sleep, struct atyfb_par *par)
return timeout ? 0 : -EIO;
}
+#endif
static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
-#ifndef CONFIG_PPC_PMAC
- /* HACK ALERT ! Once I find a proper way to say to each driver
- * individually what will happen with it's PCI slot, I'll change
- * that. On laptops, the AGP slot is just unclocked, so D2 is
- * expected, while on desktops, the card is powered off
- */
- return 0;
-#endif /* CONFIG_PPC_PMAC */
-
if (state.event == pdev->dev.power.power_state.event)
return 0;
par->asleep = 1;
par->lock_blank = 1;
+#ifdef CONFIG_PPC_PMAC
/* Set chip to "suspend" mode */
if (aty_power_mgmt(1, par)) {
par->asleep = 0;
release_console_sem();
return -EIO;
}
+#else
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+#endif
release_console_sem();
acquire_console_sem();
+#ifdef CONFIG_PPC_PMAC
if (pdev->dev.power.power_state.event == 2)
aty_power_mgmt(0, par);
+#else
+ pci_set_power_state(pdev, PCI_D0);
+#endif
+
+ aty_resume_chip(info);
+
par->asleep = 0;
/* Restore display */
snprintf(name, sizeof(name), "atybl%d", info->node);
- bd = backlight_device_register(name, par, &aty_bl_data);
+ bd = backlight_device_register(name, info->dev, par, &aty_bl_data);
if (IS_ERR(bd)) {
info->bl_dev = NULL;
printk(KERN_WARNING "aty: Backlight registration failed\n");
}
#endif /* defined(__i386__) && defined(CONFIG_FB_ATY_GENERIC_LCD) */
-static int __devinit aty_init(struct fb_info *info, const char *name)
+static int __devinit aty_init(struct fb_info *info)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
const char *ramname = NULL, *xtal;
int gtb_memsize, has_var = 0;
struct fb_var_screeninfo var;
- u8 pll_ref_div;
- u32 i;
-#if defined(CONFIG_PPC)
- int sense;
-#endif
init_waitqueue_head(&par->vblank.wait);
spin_lock_init(&par->int_lock);
- par->aty_cmap_regs =
- (struct aty_cmap_regs __iomem *) (par->ati_regbase + 0xc0);
-
#ifdef CONFIG_PPC_PMAC
/* The Apple iBook1 uses non-standard memory frequencies. We detect it
* and set the frequency manually. */
par->pll_limits.mclk = 63;
}
- if (M64_HAS(GTB_DSP)
- && (pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par))) {
- int diff1, diff2;
- diff1 = 510 * 14 / pll_ref_div - par->pll_limits.pll_max;
- diff2 = 510 * 29 / pll_ref_div - par->pll_limits.pll_max;
- if (diff1 < 0)
- diff1 = -diff1;
- if (diff2 < 0)
- diff2 = -diff2;
- if (diff2 < diff1) {
- par->ref_clk_per = 1000000000000ULL / 29498928;
- xtal = "29.498928";
+ if (M64_HAS(GTB_DSP)) {
+ u8 pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par);
+
+ if (pll_ref_div) {
+ int diff1, diff2;
+ diff1 = 510 * 14 / pll_ref_div - par->pll_limits.pll_max;
+ diff2 = 510 * 29 / pll_ref_div - par->pll_limits.pll_max;
+ if (diff1 < 0)
+ diff1 = -diff1;
+ if (diff2 < 0)
+ diff2 = -diff2;
+ if (diff2 < diff1) {
+ par->ref_clk_per = 1000000000000ULL / 29498928;
+ xtal = "29.498928";
+ }
}
}
#endif /* CONFIG_FB_ATY_CT */
if(par->pll_ops->get_pll)
par->pll_ops->get_pll(info, &saved_pll);
- i = aty_ld_le32(MEM_CNTL, par);
+ par->mem_cntl = aty_ld_le32(MEM_CNTL, par);
gtb_memsize = M64_HAS(GTB_DSP);
if (gtb_memsize)
- switch (i & 0xF) { /* 0xF used instead of MEM_SIZE_ALIAS */
+ switch (par->mem_cntl & 0xF) { /* 0xF used instead of MEM_SIZE_ALIAS */
case MEM_SIZE_512K:
info->fix.smem_len = 0x80000;
break;
default:
info->fix.smem_len = 0x80000;
} else
- switch (i & MEM_SIZE_ALIAS) {
+ switch (par->mem_cntl & MEM_SIZE_ALIAS) {
case MEM_SIZE_512K:
info->fix.smem_len = 0x80000;
break;
if (vram) {
info->fix.smem_len = vram * 1024;
- i = i & ~(gtb_memsize ? 0xF : MEM_SIZE_ALIAS);
+ par->mem_cntl &= ~(gtb_memsize ? 0xF : MEM_SIZE_ALIAS);
if (info->fix.smem_len <= 0x80000)
- i |= MEM_SIZE_512K;
+ par->mem_cntl |= MEM_SIZE_512K;
else if (info->fix.smem_len <= 0x100000)
- i |= MEM_SIZE_1M;
+ par->mem_cntl |= MEM_SIZE_1M;
else if (info->fix.smem_len <= 0x200000)
- i |= gtb_memsize ? MEM_SIZE_2M_GTB : MEM_SIZE_2M;
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_2M_GTB : MEM_SIZE_2M;
else if (info->fix.smem_len <= 0x400000)
- i |= gtb_memsize ? MEM_SIZE_4M_GTB : MEM_SIZE_4M;
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_4M_GTB : MEM_SIZE_4M;
else if (info->fix.smem_len <= 0x600000)
- i |= gtb_memsize ? MEM_SIZE_6M_GTB : MEM_SIZE_6M;
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_6M_GTB : MEM_SIZE_6M;
else
- i |= gtb_memsize ? MEM_SIZE_8M_GTB : MEM_SIZE_8M;
- aty_st_le32(MEM_CNTL, i, par);
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_8M_GTB : MEM_SIZE_8M;
+ aty_st_le32(MEM_CNTL, par->mem_cntl, par);
}
/*
#endif
if(par->pll_ops->init_pll)
par->pll_ops->init_pll(info, &par->pll);
+ if (par->pll_ops->resume_pll)
+ par->pll_ops->resume_pll(info, &par->pll);
/*
- * Last page of 8 MB (4 MB on ISA) aperture is MMIO
- * FIXME: we should use the auxiliary aperture instead so we can access
- * the full 8 MB of video RAM on 8 MB boards
+ * Last page of 8 MB (4 MB on ISA) aperture is MMIO,
+ * unless the auxiliary register aperture is used.
*/
if (!par->aux_start &&
has_var = 1;
} else {
if (default_vmode == VMODE_CHOOSE) {
+ int sense;
if (M64_HAS(G3_PB_1024x768))
/* G3 PowerBook with 1024x768 LCD */
default_vmode = VMODE_1024_768_60;
fb_list = info;
PRINTKI("fb%d: %s frame buffer device on %s\n",
- info->node, info->fix.id, name);
+ info->node, info->fix.id, par->bus_type == ISA ? "ISA" : "PCI");
return 0;
aty_init_exit:
return -1;
}
+static void aty_resume_chip(struct fb_info *info)
+{
+ struct atyfb_par *par = info->par;
+
+ aty_st_le32(MEM_CNTL, par->mem_cntl, par);
+
+ if (par->pll_ops->resume_pll)
+ par->pll_ops->resume_pll(info, &par->pll);
+
+ if (par->aux_start)
+ aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
+}
+
#ifdef CONFIG_ATARI
static int __devinit store_video_par(char *video_str, unsigned char m64_num)
{
#endif
gen_cntl = aty_ld_le32(CRTC_GEN_CNTL, par);
+ gen_cntl &= ~0x400004c;
switch (blank) {
- case FB_BLANK_UNBLANK:
- gen_cntl &= ~0x400004c;
+ case FB_BLANK_UNBLANK:
break;
case FB_BLANK_NORMAL:
gen_cntl |= 0x4000040;
static void aty_st_pal(u_int regno, u_int red, u_int green, u_int blue,
const struct atyfb_par *par)
{
-#ifdef CONFIG_ATARI
- out_8(&par->aty_cmap_regs->windex, regno);
- out_8(&par->aty_cmap_regs->lut, red);
- out_8(&par->aty_cmap_regs->lut, green);
- out_8(&par->aty_cmap_regs->lut, blue);
-#else
- writeb(regno, &par->aty_cmap_regs->windex);
- writeb(red, &par->aty_cmap_regs->lut);
- writeb(green, &par->aty_cmap_regs->lut);
- writeb(blue, &par->aty_cmap_regs->lut);
-#endif
+ aty_st_8(DAC_W_INDEX, regno, par);
+ aty_st_8(DAC_DATA, red, par);
+ aty_st_8(DAC_DATA, green, par);
+ aty_st_8(DAC_DATA, blue, par);
}
/*
#ifdef __i386__
#ifdef CONFIG_FB_ATY_GENERIC_LCD
-static void aty_init_lcd(struct atyfb_par *par, u32 bios_base)
+static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base)
{
u32 driv_inf_tab, sig;
u16 lcd_ofs;
atyfb_setup_generic_fail:
iounmap(par->ati_regbase);
par->ati_regbase = NULL;
+ if (info->screen_base) {
+ iounmap(info->screen_base);
+ info->screen_base = NULL;
+ }
return ret;
}
pci_set_drvdata(pdev, info);
/* Init chip & register framebuffer */
- if (aty_init(info, "PCI"))
+ if (aty_init(info))
goto err_release_io;
#ifdef __sparc__
#ifdef CONFIG_ATARI
-static int __devinit atyfb_atari_probe(void)
+static int __init atyfb_atari_probe(void)
{
struct atyfb_par *par;
struct fb_info *info;
int m64_num;
u32 clock_r;
+ int num_found = 0;
for (m64_num = 0; m64_num < mach64_count; m64_num++) {
if (!phys_vmembase[m64_num] || !phys_size[m64_num] ||
break;
}
- if (aty_init(info, "ISA bus")) {
+ /* Fake pci_id for correct_chipset() */
+ switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) {
+ case 0x00d7:
+ par->pci_id = PCI_CHIP_MACH64GX;
+ break;
+ case 0x0057:
+ par->pci_id = PCI_CHIP_MACH64CX;
+ break;
+ default:
+ break;
+ }
+
+ if (correct_chipset(par) || aty_init(info)) {
+ iounmap(info->screen_base);
+ iounmap(par->ati_regbase);
framebuffer_release(info);
- /* This is insufficient! kernel_map has added two large chunks!! */
- return -ENXIO;
+ } else {
+ num_found++;
}
}
+
+ return num_found ? 0 : -ENXIO;
}
#endif /* CONFIG_ATARI */
+#ifdef CONFIG_PCI
+
static void __devexit atyfb_remove(struct fb_info *info)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
framebuffer_release(info);
}
-#ifdef CONFIG_PCI
static void __devexit atyfb_pci_remove(struct pci_dev *pdev)
{
#endif /* CONFIG_PCI */
#ifndef MODULE
-static int __devinit atyfb_setup(char *options)
+static int __init atyfb_setup(char *options)
{
char *this_opt;
}
#endif /* MODULE */
-static int __devinit atyfb_init(void)
+static int __init atyfb_init(void)
{
int err1 = 1, err2 = 1;
#ifndef MODULE
#endif
}
-static void __init aty_get_pll_ct(const struct fb_info *info,
- union aty_pll *pll)
+static void __devinit aty_get_pll_ct(const struct fb_info *info,
+ union aty_pll *pll)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
u8 tmp, clock;
}
}
-static int __init aty_init_pll_ct(const struct fb_info *info,
- union aty_pll *pll)
+static int __devinit aty_init_pll_ct(const struct fb_info *info,
+ union aty_pll *pll)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
- u8 mpost_div, xpost_div, sclk_post_div_real, sclk_fb_div, spll_cntl2;
- u32 q, i, memcntl, trp;
+ u8 mpost_div, xpost_div, sclk_post_div_real;
+ u32 q, memcntl, trp;
u32 dsp_config, dsp_on_off, vga_dsp_config, vga_dsp_on_off;
#ifdef DEBUG
int pllmclk, pllsclk;
mpost_div += (q < 32*8);
}
sclk_post_div_real = postdividers[mpost_div];
- sclk_fb_div = q * sclk_post_div_real / 8;
- spll_cntl2 = mpost_div << 4;
+ pll->ct.sclk_fb_div = q * sclk_post_div_real / 8;
+ pll->ct.spll_cntl2 = mpost_div << 4;
#ifdef DEBUG
- pllsclk = (1000000 * 2 * sclk_fb_div) /
+ pllsclk = (1000000 * 2 * pll->ct.sclk_fb_div) /
(par->ref_clk_per * pll->ct.pll_ref_div);
printk("atyfb(%s): use sclk, pllsclk=%d MHz, sclk=mclk=%d MHz\n",
__FUNCTION__, pllsclk, pllsclk / sclk_post_div_real);
#endif
+ }
+
+ /* Disable the extra precision pixel clock controls since we do not use them. */
+ pll->ct.ext_vpll_cntl = aty_ld_pll_ct(EXT_VPLL_CNTL, par);
+ pll->ct.ext_vpll_cntl &= ~(EXT_VPLL_EN | EXT_VPLL_VGA_EN | EXT_VPLL_INSYNC);
+
+ return 0;
+}
+
+static void aty_resume_pll_ct(const struct fb_info *info,
+ union aty_pll *pll)
+{
+ struct atyfb_par *par = info->par;
+
+ if (par->mclk_per != par->xclk_per) {
+ int i;
/*
* This disables the sclk, crashes the computer as reported:
* aty_st_pll_ct(SPLL_CNTL2, 3, info);
* So it seems the sclk must be enabled before it is used;
* so PLL_GEN_CNTL must be programmed *after* the sclk.
*/
- aty_st_pll_ct(SCLK_FB_DIV, sclk_fb_div, par);
- aty_st_pll_ct(SPLL_CNTL2, spll_cntl2, par);
+ aty_st_pll_ct(SCLK_FB_DIV, pll->ct.sclk_fb_div, par);
+ aty_st_pll_ct(SPLL_CNTL2, pll->ct.spll_cntl2, par);
/*
* The sclk has been started. However, I believe the first clock
* ticks it generates are not very stable. Hope this primitive loop
aty_st_pll_ct(PLL_GEN_CNTL, pll->ct.pll_gen_cntl, par);
aty_st_pll_ct(MCLK_FB_DIV, pll->ct.mclk_fb_div, par);
aty_st_pll_ct(PLL_EXT_CNTL, pll->ct.pll_ext_cntl, par);
- /* Disable the extra precision pixel clock controls since we do not use them. */
- aty_st_pll_ct(EXT_VPLL_CNTL, aty_ld_pll_ct(EXT_VPLL_CNTL, par) &
- ~(EXT_VPLL_EN | EXT_VPLL_VGA_EN | EXT_VPLL_INSYNC), par);
-
- return 0;
+ aty_st_pll_ct(EXT_VPLL_CNTL, pll->ct.ext_vpll_cntl, par);
}
static int dummy(void)
.pll_to_var = aty_pll_to_var_ct,
.set_pll = aty_set_pll_ct,
.get_pll = aty_get_pll_ct,
- .init_pll = aty_init_pll_ct
+ .init_pll = aty_init_pll_ct,
+ .resume_pll = aty_resume_pll_ct,
};
snprintf(name, sizeof(name), "radeonbl%d", rinfo->info->node);
- bd = backlight_device_register(name, pdata, &radeon_bl_data);
+ bd = backlight_device_register(name, rinfo->info->dev, pdata, &radeon_bl_data);
if (IS_ERR(bd)) {
rinfo->info->bl_dev = NULL;
printk("radeonfb: Backlight registration failed\n");
void radeon_delete_i2c_busses(struct radeonfb_info *rinfo)
{
if (rinfo->i2c[0].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[0].adapter);
+ i2c_del_adapter(&rinfo->i2c[0].adapter);
rinfo->i2c[0].rinfo = NULL;
if (rinfo->i2c[1].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[1].adapter);
+ i2c_del_adapter(&rinfo->i2c[1].adapter);
rinfo->i2c[1].rinfo = NULL;
if (rinfo->i2c[2].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[2].adapter);
+ i2c_del_adapter(&rinfo->i2c[2].adapter);
rinfo->i2c[2].rinfo = NULL;
if (rinfo->i2c[3].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[3].adapter);
+ i2c_del_adapter(&rinfo->i2c[3].adapter);
rinfo->i2c[3].rinfo = NULL;
}
if (pedid == NULL)
return mt;
- tmp = (u8 *)kmalloc(EDID_LENGTH, GFP_KERNEL);
+ tmp = kmemdup(pedid, EDID_LENGTH, GFP_KERNEL);
if (!tmp)
return mt;
- memcpy(tmp, pedid, EDID_LENGTH);
*out_EDID = tmp;
return mt;
}
.bpp = 16,
.control_base = 0x0004886A |
LCD_CONTROL_DEFAULT_PO | LCD_CONTROL_DEFAULT_SBPPF |
- LCD_CONTROL_BPP_16,
+ LCD_CONTROL_BPP_16 | LCD_CONTROL_SBB_4,
.clkcontrol_base = 0x00020000,
.horztiming = 0x005aff1f,
.verttiming = 0x16000e57,
#include <linux/err.h>
#include <linux/fb.h>
+
+#if defined(CONFIG_FB) || (defined(CONFIG_FB_MODULE) && \
+ defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE))
+/* This callback gets called when something important happens inside a
+ * framebuffer driver. We're looking if that important event is blanking,
+ * and if it is, we're switching backlight power as well ...
+ */
+static int fb_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ struct backlight_device *bd;
+ struct fb_event *evdata = data;
+
+ /* If we aren't interested in this event, skip it immediately ... */
+ if (event != FB_EVENT_BLANK)
+ return 0;
+
+ bd = container_of(self, struct backlight_device, fb_notif);
+ down(&bd->sem);
+ if (bd->props)
+ if (!bd->props->check_fb ||
+ bd->props->check_fb(evdata->info)) {
+ bd->props->fb_blank = *(int *)evdata->data;
+ if (likely(bd->props && bd->props->update_status))
+ bd->props->update_status(bd);
+ }
+ up(&bd->sem);
+ return 0;
+}
+
+static int backlight_register_fb(struct backlight_device *bd)
+{
+ memset(&bd->fb_notif, 0, sizeof(bd->fb_notif));
+ bd->fb_notif.notifier_call = fb_notifier_callback;
+
+ return fb_register_client(&bd->fb_notif);
+}
+
+static void backlight_unregister_fb(struct backlight_device *bd)
+{
+ fb_unregister_client(&bd->fb_notif);
+}
+#else
+static inline int backlight_register_fb(struct backlight_device *bd)
+{
+ return 0;
+}
+
+static inline void backlight_unregister_fb(struct backlight_device *bd)
+{
+}
+#endif /* CONFIG_FB */
+
static ssize_t backlight_show_power(struct class_device *cdev, char *buf)
{
int rc = -ENXIO;
.store = _store, \
}
-static struct class_device_attribute bl_class_device_attributes[] = {
+static const struct class_device_attribute bl_class_device_attributes[] = {
DECLARE_ATTR(power, 0644, backlight_show_power, backlight_store_power),
DECLARE_ATTR(brightness, 0644, backlight_show_brightness,
backlight_store_brightness),
DECLARE_ATTR(max_brightness, 0444, backlight_show_max_brightness, NULL),
};
-/* This callback gets called when something important happens inside a
- * framebuffer driver. We're looking if that important event is blanking,
- * and if it is, we're switching backlight power as well ...
- */
-static int fb_notifier_callback(struct notifier_block *self,
- unsigned long event, void *data)
-{
- struct backlight_device *bd;
- struct fb_event *evdata =(struct fb_event *)data;
-
- /* If we aren't interested in this event, skip it immediately ... */
- if (event != FB_EVENT_BLANK)
- return 0;
-
- bd = container_of(self, struct backlight_device, fb_notif);
- down(&bd->sem);
- if (bd->props)
- if (!bd->props->check_fb ||
- bd->props->check_fb(evdata->info)) {
- bd->props->fb_blank = *(int *)evdata->data;
- if (likely(bd->props && bd->props->update_status))
- bd->props->update_status(bd);
- }
- up(&bd->sem);
- return 0;
-}
-
/**
* backlight_device_register - create and register a new object of
* backlight_device class.
* Creates and registers new backlight class_device. Returns either an
* ERR_PTR() or a pointer to the newly allocated device.
*/
-struct backlight_device *backlight_device_register(const char *name, void *devdata,
- struct backlight_properties *bp)
+struct backlight_device *backlight_device_register(const char *name,
+ struct device *dev,
+ void *devdata,
+ struct backlight_properties *bp)
{
int i, rc;
struct backlight_device *new_bd;
new_bd->props = bp;
memset(&new_bd->class_dev, 0, sizeof(new_bd->class_dev));
new_bd->class_dev.class = &backlight_class;
+ new_bd->class_dev.dev = dev;
strlcpy(new_bd->class_dev.class_id, name, KOBJ_NAME_LEN);
class_set_devdata(&new_bd->class_dev, devdata);
return ERR_PTR(rc);
}
- memset(&new_bd->fb_notif, 0, sizeof(new_bd->fb_notif));
- new_bd->fb_notif.notifier_call = fb_notifier_callback;
-
- rc = fb_register_client(&new_bd->fb_notif);
+ rc = backlight_register_fb(new_bd);
if (unlikely(rc))
goto error;
&bl_class_device_attributes[i]);
down(&bd->sem);
- if (likely(bd->props && bd->props->update_status)) {
- bd->props->brightness = 0;
- bd->props->power = 0;
- bd->props->update_status(bd);
- }
-
bd->props = NULL;
up(&bd->sem);
- fb_unregister_client(&bd->fb_notif);
+ backlight_unregister_fb(bd);
class_device_unregister(&bd->class_dev);
}
static int corgibl_remove(struct platform_device *dev)
{
+ corgibl_data.power = 0;
+ corgibl_data.brightness = 0;
+ corgibl_send_intensity(corgi_backlight_device);
+
backlight_device_unregister(corgi_backlight_device);
printk("Corgi Backlight Driver Unloaded\n");
static int hp680bl_remove(struct platform_device *dev)
{
+ hp680bl_data.brightness = 0;
+ hp680bl_data.power = 0;
+ hp680bl_send_intensity(hp680_backlight_device);
+
backlight_device_unregister(hp680_backlight_device);
return 0;
#include <linux/err.h>
#include <linux/fb.h>
+#if defined(CONFIG_FB) || (defined(CONFIG_FB_MODULE) && \
+ defined(CONFIG_LCD_CLASS_DEVICE_MODULE))
+/* This callback gets called when something important happens inside a
+ * framebuffer driver. We're looking if that important event is blanking,
+ * and if it is, we're switching lcd power as well ...
+ */
+static int fb_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ struct lcd_device *ld;
+ struct fb_event *evdata = data;
+
+ /* If we aren't interested in this event, skip it immediately ... */
+ if (event != FB_EVENT_BLANK)
+ return 0;
+
+ ld = container_of(self, struct lcd_device, fb_notif);
+ down(&ld->sem);
+ if (ld->props)
+ if (!ld->props->check_fb || ld->props->check_fb(evdata->info))
+ ld->props->set_power(ld, *(int *)evdata->data);
+ up(&ld->sem);
+ return 0;
+}
+
+static int lcd_register_fb(struct lcd_device *ld)
+{
+ memset(&ld->fb_notif, 0, sizeof(&ld->fb_notif));
+ ld->fb_notif.notifier_call = fb_notifier_callback;
+ return fb_register_client(&ld->fb_notif);
+}
+
+static void lcd_unregister_fb(struct lcd_device *ld)
+{
+ fb_unregister_client(&ld->fb_notif);
+}
+#else
+static int lcd_register_fb(struct lcd_device *ld)
+{
+ return 0;
+}
+
+static inline void lcd_unregister_fb(struct lcd_device *ld)
+{
+}
+#endif /* CONFIG_FB */
+
static ssize_t lcd_show_power(struct class_device *cdev, char *buf)
{
int rc;
.store = _store, \
}
-static struct class_device_attribute lcd_class_device_attributes[] = {
+static const struct class_device_attribute lcd_class_device_attributes[] = {
DECLARE_ATTR(power, 0644, lcd_show_power, lcd_store_power),
DECLARE_ATTR(contrast, 0644, lcd_show_contrast, lcd_store_contrast),
DECLARE_ATTR(max_contrast, 0444, lcd_show_max_contrast, NULL),
};
-/* This callback gets called when something important happens inside a
- * framebuffer driver. We're looking if that important event is blanking,
- * and if it is, we're switching lcd power as well ...
- */
-static int fb_notifier_callback(struct notifier_block *self,
- unsigned long event, void *data)
-{
- struct lcd_device *ld;
- struct fb_event *evdata =(struct fb_event *)data;
-
- /* If we aren't interested in this event, skip it immediately ... */
- if (event != FB_EVENT_BLANK)
- return 0;
-
- ld = container_of(self, struct lcd_device, fb_notif);
- down(&ld->sem);
- if (ld->props)
- if (!ld->props->check_fb || ld->props->check_fb(evdata->info))
- ld->props->set_power(ld, *(int *)evdata->data);
- up(&ld->sem);
- return 0;
-}
-
/**
* lcd_device_register - register a new object of lcd_device class.
* @name: the name of the new object(must be the same as the name of the
return ERR_PTR(rc);
}
- memset(&new_ld->fb_notif, 0, sizeof(new_ld->fb_notif));
- new_ld->fb_notif.notifier_call = fb_notifier_callback;
+ rc = lcd_register_fb(new_ld);
- rc = fb_register_client(&new_ld->fb_notif);
if (unlikely(rc))
goto error;
down(&ld->sem);
ld->props = NULL;
up(&ld->sem);
-
- fb_unregister_client(&ld->fb_notif);
-
+ lcd_unregister_fb(ld);
class_device_unregister(&ld->class_dev);
}
EXPORT_SYMBOL(lcd_device_unregister);
{
unsigned long flags;
+ locomobl_data.brightness = 0;
+ locomobl_data.power = 0;
+ locomolcd_set_intensity(locomolcd_bl_device);
+
backlight_device_unregister(locomolcd_bl_device);
local_irq_save(flags);
locomolcd_dev = NULL;
#define DPRINTK(fmt, args...)
#endif
-static u32 cfb_tab8[] = {
+static const u32 cfb_tab8[] = {
#if defined(__BIG_ENDIAN)
0x00000000,0x000000ff,0x0000ff00,0x0000ffff,
0x00ff0000,0x00ff00ff,0x00ffff00,0x00ffffff,
#endif
};
-static u32 cfb_tab16[] = {
+static const u32 cfb_tab16[] = {
#if defined(__BIG_ENDIAN)
0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff
#elif defined(__LITTLE_ENDIAN)
#endif
};
-static u32 cfb_tab32[] = {
+static const u32 cfb_tab32[] = {
0x00000000, 0xffffffff
};
u32 bit_mask, end_mask, eorx, shift;
const char *s = image->data, *src;
u32 __iomem *dst;
- u32 *tab = NULL;
+ const u32 *tab = NULL;
int i, j, k;
switch (bpp) {
printk ("Cirrus Logic chipset on PCI bus\n");
pci_set_drvdata(pdev, info);
- return cirrusfb_register(cinfo);
+ ret = cirrusfb_register(cinfo);
+ if (ret)
+ iounmap(cinfo->fbmem);
+ return ret;
err_release_legacy:
if (release_io_ports)
printk (KERN_INFO "Cirrus Logic chipset on Zorro bus\n");
zorro_set_drvdata(z, info);
- return cirrusfb_register(cinfo);
+ ret = cirrusfb_register(cinfo);
+ if (ret) {
+ if (btype == BT_PICASSO4) {
+ iounmap(cinfo->fbmem);
+ iounmap(cinfo->regbase - 0x600000);
+ } else if (board_addr > 0x01000000)
+ iounmap(cinfo->fbmem);
+ }
+ return ret;
err_unmap_regbase:
/* Parental advisory: explicit hack */
/*
- * linux/drivers/video/softcursor.c -- Generic software cursor for frame buffer devices
+ * linux/drivers/video/softcursor.c
+ *
+ * Generic software cursor for frame buffer devices
*
* Created 14 Nov 2002 by James Simmons
*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
*/
#include <linux/module.h>
unsigned int buf_align = info->pixmap.buf_align - 1;
unsigned int i, size, dsize, s_pitch, d_pitch;
struct fb_image *image;
- u8 *dst;
+ u8 *src, *dst;
if (info->state != FBINFO_STATE_RUNNING)
return 0;
}
}
- image = (struct fb_image *) (ops->cursor_src + dsize);
+ src = ops->cursor_src + sizeof(struct fb_image);
+ image = (struct fb_image *)ops->cursor_src;
*image = cursor->image;
d_pitch = (s_pitch + scan_align) & ~scan_align;
switch (cursor->rop) {
case ROP_XOR:
for (i = 0; i < dsize; i++)
- ops->cursor_src[i] = image->data[i] ^
- cursor->mask[i];
+ src[i] = image->data[i] ^ cursor->mask[i];
break;
case ROP_COPY:
default:
for (i = 0; i < dsize; i++)
- ops->cursor_src[i] = image->data[i] &
- cursor->mask[i];
+ src[i] = image->data[i] & cursor->mask[i];
break;
}
} else
- memcpy(ops->cursor_src, image->data, dsize);
+ memcpy(src, image->data, dsize);
- fb_pad_aligned_buffer(dst, d_pitch, ops->cursor_src, s_pitch,
- image->height);
+ fb_pad_aligned_buffer(dst, d_pitch, src, s_pitch, image->height);
image->data = dst;
info->fbops->fb_imageblit(info, image);
return 0;
{
}
-static struct consw sti_con = {
+static const struct consw sti_con = {
.owner = THIS_MODULE,
.con_startup = sticon_startup,
.con_init = sticon_init,
static unsigned long vgacon_uni_pagedir[2];
/* Description of the hardware situation */
-static unsigned long vga_vram_base; /* Base of video memory */
-static unsigned long vga_vram_end; /* End of video memory */
-static int vga_vram_size; /* Size of video memory */
-static u16 vga_video_port_reg; /* Video register select port */
-static u16 vga_video_port_val; /* Video register value port */
-static unsigned int vga_video_num_columns; /* Number of text columns */
-static unsigned int vga_video_num_lines; /* Number of text lines */
-static int vga_can_do_color = 0; /* Do we support colors? */
-static unsigned int vga_default_font_height;/* Height of default screen font */
-static unsigned char vga_video_type; /* Card type */
-static unsigned char vga_hardscroll_enabled;
-static unsigned char vga_hardscroll_user_enable = 1;
+static int vga_init_done __read_mostly;
+static unsigned long vga_vram_base __read_mostly; /* Base of video memory */
+static unsigned long vga_vram_end __read_mostly; /* End of video memory */
+static unsigned int vga_vram_size __read_mostly; /* Size of video memory */
+static u16 vga_video_port_reg __read_mostly; /* Video register select port */
+static u16 vga_video_port_val __read_mostly; /* Video register value port */
+static unsigned int vga_video_num_columns; /* Number of text columns */
+static unsigned int vga_video_num_lines; /* Number of text lines */
+static int vga_can_do_color __read_mostly; /* Do we support colors? */
+static unsigned int vga_default_font_height __read_mostly; /* Height of default screen font */
+static unsigned char vga_video_type __read_mostly; /* Card type */
+static unsigned char vga_hardscroll_enabled __read_mostly;
+static unsigned char vga_hardscroll_user_enable __read_mostly = 1;
static unsigned char vga_font_is_default = 1;
static int vga_vesa_blanked;
static int vga_palette_blanked;
static int vga_is_gfx;
static int vga_512_chars;
static int vga_video_font_height;
-static int vga_scan_lines;
-static unsigned int vga_rolled_over = 0;
-static int vga_init_done;
+static int vga_scan_lines __read_mostly;
+static unsigned int vga_rolled_over;
static int __init no_scroll(char *str)
{
#define wb_64(regs,reg,dat) (*(((volatile unsigned char *)regs) + reg) = dat)
#define rb_64(regs, reg) (*(((volatile unsigned char *)regs) + reg))
-#define ww_64(regs,reg,dat) (*((volatile unsigned short *)(regs + reg) = dat)
-
struct cyberfb_par {
struct fb_var_screeninfo var;
__u32 type;
if (register_framebuffer(&fb_info) < 0) {
DPRINTK("EXIT - register_framebuffer failed\n");
+ if (CyberBase)
+ iounmap(CyberBase);
release_mem_region(CyberMem_phys, 0x400000);
release_mem_region(CyberRegs_phys, 0x10000);
return -EINVAL;
static ssize_t
epson1355fb_read(struct file *file, char *buf, size_t count, loff_t * ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int fbidx = iminor(inode);
struct fb_info *info = registered_fb[fbidx];
unsigned long p = *ppos;
epson1355fb_write(struct file *file, const char *buf,
size_t count, loff_t * ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int fbidx = iminor(inode);
struct fb_info *info = registered_fb[fbidx];
unsigned long p = *ppos;
#include <asm/uaccess.h>
-static u16 red2[] = {
+static u16 red2[] __read_mostly = {
0x0000, 0xaaaa
};
-static u16 green2[] = {
+static u16 green2[] __read_mostly = {
0x0000, 0xaaaa
};
-static u16 blue2[] = {
+static u16 blue2[] __read_mostly = {
0x0000, 0xaaaa
};
-static u16 red4[] = {
+static u16 red4[] __read_mostly = {
0x0000, 0xaaaa, 0x5555, 0xffff
};
-static u16 green4[] = {
+static u16 green4[] __read_mostly = {
0x0000, 0xaaaa, 0x5555, 0xffff
};
-static u16 blue4[] = {
+static u16 blue4[] __read_mostly = {
0x0000, 0xaaaa, 0x5555, 0xffff
};
-static u16 red8[] = {
+static u16 red8[] __read_mostly = {
0x0000, 0x0000, 0x0000, 0x0000, 0xaaaa, 0xaaaa, 0xaaaa, 0xaaaa
};
-static u16 green8[] = {
+static u16 green8[] __read_mostly = {
0x0000, 0x0000, 0xaaaa, 0xaaaa, 0x0000, 0x0000, 0x5555, 0xaaaa
};
-static u16 blue8[] = {
+static u16 blue8[] __read_mostly = {
0x0000, 0xaaaa, 0x0000, 0xaaaa, 0x0000, 0xaaaa, 0x0000, 0xaaaa
};
-static u16 red16[] = {
+static u16 red16[] __read_mostly = {
0x0000, 0x0000, 0x0000, 0x0000, 0xaaaa, 0xaaaa, 0xaaaa, 0xaaaa,
0x5555, 0x5555, 0x5555, 0x5555, 0xffff, 0xffff, 0xffff, 0xffff
};
-static u16 green16[] = {
+static u16 green16[] __read_mostly = {
0x0000, 0x0000, 0xaaaa, 0xaaaa, 0x0000, 0x0000, 0x5555, 0xaaaa,
0x5555, 0x5555, 0xffff, 0xffff, 0x5555, 0x5555, 0xffff, 0xffff
};
-static u16 blue16[] = {
+static u16 blue16[] __read_mostly = {
0x0000, 0xaaaa, 0x0000, 0xaaaa, 0x0000, 0xaaaa, 0x0000, 0xaaaa,
0x5555, 0xffff, 0x5555, 0xffff, 0x5555, 0xffff, 0x5555, 0xffff
};
-static struct fb_cmap default_2_colors = {
- 0, 2, red2, green2, blue2, NULL
+static const struct fb_cmap default_2_colors = {
+ .len=2, .red=red2, .green=green2, .blue=blue2
};
-static struct fb_cmap default_8_colors = {
- 0, 8, red8, green8, blue8, NULL
+static const struct fb_cmap default_8_colors = {
+ .len=8, .red=red8, .green=green8, .blue=blue8
};
-static struct fb_cmap default_4_colors = {
- 0, 4, red4, green4, blue4, NULL
+static const struct fb_cmap default_4_colors = {
+ .len=4, .red=red4, .green=green4, .blue=blue4
};
-static struct fb_cmap default_16_colors = {
- 0, 16, red16, green16, blue16, NULL
+static const struct fb_cmap default_16_colors = {
+ .len=16, .red=red16, .green=green16, .blue=blue16
};
+
/**
* fb_alloc_cmap - allocate a colormap
* @cmap: frame buffer colormap structure
* Copy contents of colormap from @from to @to.
*/
-int fb_copy_cmap(struct fb_cmap *from, struct fb_cmap *to)
+int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to)
{
int tooff = 0, fromoff = 0;
int size;
return 0;
}
-int fb_cmap_to_user(struct fb_cmap *from, struct fb_cmap_user *to)
+int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to)
{
int tooff = 0, fromoff = 0;
int size;
*
*/
-struct fb_cmap *fb_default_cmap(int len)
+const struct fb_cmap *fb_default_cmap(int len)
{
if (len <= 2)
return &default_2_colors;
{
u_int i;
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < ARRAY_SIZE(red2); i++) {
red2[i] = ~red2[i];
green2[i] = ~green2[i];
blue2[i] = ~blue2[i];
}
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < ARRAY_SIZE(red4); i++) {
red4[i] = ~red4[i];
green4[i] = ~green4[i];
blue4[i] = ~blue4[i];
}
- for (i = 0; i < 8; i++) {
+ for (i = 0; i < ARRAY_SIZE(red8); i++) {
red8[i] = ~red8[i];
green8[i] = ~green8[i];
blue8[i] = ~blue8[i];
}
- for (i = 0; i < 16; i++) {
+ for (i = 0; i < ARRAY_SIZE(red16); i++) {
red16[i] = ~red16[i];
green16[i] = ~green16[i];
blue16[i] = ~blue16[i];
u32 status;
};
-static int fb_cvt_vbi_tab[] = {
+static const unsigned char fb_cvt_vbi_tab[] = {
4, /* 4:3 */
5, /* 16:9 */
6, /* 16:10 */
#define FBPIXMAPSIZE (1024 * 8)
-struct fb_info *registered_fb[FB_MAX];
-int num_registered_fb;
+struct fb_info *registered_fb[FB_MAX] __read_mostly;
+int num_registered_fb __read_mostly;
/*
* Helpers
const struct linux_logo *logo,
u32 *palette)
{
- unsigned char mask[9] = { 0,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff };
+ static const unsigned char mask[] = { 0,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff };
unsigned char redmask, greenmask, bluemask;
int redshift, greenshift, blueshift;
int i;
int needs_truepalette;
int needs_cmapreset;
const struct linux_logo *logo;
-} fb_logo;
+} fb_logo __read_mostly;
static void fb_rotate_logo_ud(const u8 *in, u8 *out, u32 width, u32 height)
{
fb_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int fbidx = iminor(inode);
struct fb_info *info = registered_fb[fbidx];
u32 *buffer, *dst;
fb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
unsigned long p = *ppos;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int fbidx = iminor(inode);
struct fb_info *info = registered_fb[fbidx];
u32 *buffer, *src;
static long
fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int fbidx = iminor(inode);
struct fb_info *info = registered_fb[fbidx];
struct fb_ops *fb = info->fbops;
static int
fb_mmap(struct file *file, struct vm_area_struct * vma)
{
- int fbidx = iminor(file->f_dentry->d_inode);
+ int fbidx = iminor(file->f_path.dentry->d_inode);
struct fb_info *info = registered_fb[fbidx];
struct fb_ops *fb = info->fbops;
unsigned long off;
return 0;
}
-static struct file_operations fb_fops = {
+static const struct file_operations fb_fops = {
.owner = THIS_MODULE,
.read = fb_read,
.write = fb_write,
return err;
}
-static char *video_options[FB_MAX];
-static int ofonly;
+static char *video_options[FB_MAX] __read_mostly;
+static int ofonly __read_mostly;
extern const char *global_mode_option;
u32 fix;
};
-static struct broken_edid brokendb[] = {
+static const struct broken_edid brokendb[] = {
/* DEC FR-PCXAV-YZ */
{
.manufacturer = "DEC",
if (fb_alloc_cmap(&all->info.cmap, 256, 0)) {
printk(KERN_ERR "ffb: Could not allocate color map.\n");
+ of_iounmap(all->par.fbc, sizeof(struct ffb_fbc));
+ of_iounmap(all->par.dac, sizeof(struct ffb_dac));
kfree(all);
return -ENOMEM;
}
if (err < 0) {
printk(KERN_ERR "ffb: Could not register framebuffer.\n");
fb_dealloc_cmap(&all->info.cmap);
+ of_iounmap(all->par.fbc, sizeof(struct ffb_fbc));
+ of_iounmap(all->par.dac, sizeof(struct ffb_dac));
kfree(all);
return err;
}
if (register_framebuffer(info) < 0) {
fb_dealloc_cmap(&info->cmap);
+ iounmap(info->screen_base);
framebuffer_release(info);
zorro_release_device(z);
return -EINVAL;
If unsure, say N.
+config FB_GEODE_GX_SET_FBSIZE
+ bool "Manually specify the Geode GX framebuffer size"
+ depends on FB_GEODE_GX
+ default n
+ ---help---
+ If you want to manually specify the size of your GX framebuffer,
+ say Y here, otherwise say N to dynamically probe it.
+
+ Say N unless you know what you are doing.
+
+config FB_GEODE_GX_FBSIZE
+ hex "Size of the GX framebuffer, in bytes"
+ depends on FB_GEODE_GX_SET_FBSIZE
+ default "0x1600000"
+ ---help---
+ Specify the size of the GX framebuffer. Normally, you will
+ want this to be MB aligned. Common values are 0x80000 (8MB)
+ and 0x1600000 (16MB). Don't change this unless you know what
+ you are doing
+
config FB_GEODE_GX1
tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)"
depends on FB && FB_GEODE && EXPERIMENTAL
#include "geodefb.h"
#include "display_gx.h"
-int gx_frame_buffer_size(void)
+#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
+unsigned int gx_frame_buffer_size(void)
{
- /* Assuming 16 MiB. */
- return 16*1024*1024;
+ return CONFIG_FB_GEODE_GX_FBSIZE;
}
+#else
+unsigned int gx_frame_buffer_size(void)
+{
+ unsigned int val;
+
+ /* FB size is reported by a virtual register */
+ /* Virtual register class = 0x02 */
+ /* VG_MEM_SIZE(512Kb units) = 0x00 */
+
+ outw(0xFC53, 0xAC1C);
+ outw(0x0200, 0xAC1C);
+
+ val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
+ return (val << 19);
+}
+#endif
int gx_line_delta(int xres, int bpp)
{
writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
par->dc_regs + DC_LINE_SIZE);
+
/* Enable graphics and video data and unmask address lines. */
dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
#ifndef __DISPLAY_GX_H__
#define __DISPLAY_GX_H__
-int gx_frame_buffer_size(void);
+unsigned int gx_frame_buffer_size(void);
int gx_line_delta(int xres, int bpp);
extern struct geode_dc_ops gx_dc_ops;
+/* MSR that tells us if a TFT or CRT is attached */
+#define GLD_MSR_CONFIG 0xC0002001
+#define GLD_MSR_CONFIG_DM_FP 0x40
+
/* Display controller registers */
#define DC_UNLOCK 0x00
#define DC_PAL_ADDRESS 0x70
#define DC_PAL_DATA 0x74
+#define DC_GLIU0_MEM_OFFSET 0x84
#endif /* !__DISPLAY_GX1_H__ */
#include "display_gx.h"
#include "video_gx.h"
-static char mode_option[32] = "640x480-16@60";
+static char *mode_option;
/* Modes relevant to the GX (taken from modedb.c) */
-static const struct fb_videomode __initdata gx_modedb[] = {
+static const struct fb_videomode gx_modedb[] __initdata = {
/* 640x480-60 VESA */
{ NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
if (!info->screen_base)
return -ENOMEM;
+ /* Set the 16MB aligned base address of the graphics memory region
+ * in the display controller */
+
+ writel(info->fix.smem_start & 0xFF000000,
+ par->dc_regs + DC_GLIU0_MEM_OFFSET);
+
dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
info->fix.smem_len / 1024, info->fix.smem_start);
struct geodefb_par *par;
struct fb_info *info;
int ret;
+ unsigned long val;
info = gxfb_init_fbinfo(&pdev->dev);
if (!info)
goto err;
}
+ /* Figure out if this is a TFT or CRT part */
+
+ rdmsrl(GLD_MSR_CONFIG, val);
+
+ if ((val & GLD_MSR_CONFIG_DM_FP) == GLD_MSR_CONFIG_DM_FP)
+ par->enable_crt = 0;
+ else
+ par->enable_crt = 1;
+
ret = fb_find_mode(&info->var, info, mode_option,
gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
if (ret == 0 || ret == 4) {
goto err;
}
- /* Clear the frame buffer of garbage. */
+
+ /* Clear the frame buffer of garbage. */
memset_io(info->screen_base, 0, info->fix.smem_len);
gxfb_check_var(&info->var, info);
.remove = gxfb_remove,
};
+#ifndef MODULE
+static int __init gxfb_setup(char *options)
+{
+
+ char *opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+
+ mode_option = opt;
+ }
+
+ return 0;
+}
+#endif
+
static int __init gxfb_init(void)
{
#ifndef MODULE
- if (fb_get_options("gxfb", NULL))
+ char *option = NULL;
+
+ if (fb_get_options("gxfb", &option))
return -ENODEV;
+
+ gxfb_setup(option);
#endif
return pci_register_driver(&gxfb_driver);
}
module_init(gxfb_init);
module_exit(gxfb_cleanup);
-module_param_string(mode, mode_option, sizeof(mode_option), 0444);
-MODULE_PARM_DESC(mode, "video mode (<x>x<y>[-<bpp>][@<refr>])");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
MODULE_LICENSE("GPL");
} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
}
+static void
+gx_configure_tft(struct fb_info *info)
+{
+ struct geodefb_par *par = info->par;
+ unsigned long val;
+ unsigned long fp;
+
+ /* Set up the DF pad select MSR */
+
+ rdmsrl(GX_VP_MSR_PAD_SELECT, val);
+ val &= ~GX_VP_PAD_SELECT_MASK;
+ val |= GX_VP_PAD_SELECT_TFT;
+ wrmsrl(GX_VP_MSR_PAD_SELECT, val);
+
+ /* Turn off the panel */
+
+ fp = readl(par->vid_regs + GX_FP_PM);
+ fp &= ~GX_FP_PM_P;
+ writel(fp, par->vid_regs + GX_FP_PM);
+
+ /* Set timing 1 */
+
+ fp = readl(par->vid_regs + GX_FP_PT1);
+ fp &= GX_FP_PT1_VSIZE_MASK;
+ fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
+ writel(fp, par->vid_regs + GX_FP_PT1);
+
+ /* Timing 2 */
+ /* Set bits that are always on for TFT */
+
+ fp = 0x0F100000;
+
+ /* Add sync polarity */
+
+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+ fp |= GX_FP_PT2_VSP;
+
+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+ fp |= GX_FP_PT2_HSP;
+
+ writel(fp, par->vid_regs + GX_FP_PT2);
+
+ /* Set the dither control */
+ writel(0x70, par->vid_regs + GX_FP_DFC);
+
+ /* Enable the FP data and power (in case the BIOS didn't) */
+
+ fp = readl(par->vid_regs + GX_DCFG);
+ fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
+ writel(fp, par->vid_regs + GX_DCFG);
+
+ /* Unblank the panel */
+
+ fp = readl(par->vid_regs + GX_FP_PM);
+ fp |= GX_FP_PM_P;
+ writel(fp, par->vid_regs + GX_FP_PM);
+}
+
static void gx_configure_display(struct fb_info *info)
{
struct geodefb_par *par = info->par;
- u32 dcfg, fp_pm;
+ u32 dcfg, misc;
+
+ /* Set up the MISC register */
+
+ misc = readl(par->vid_regs + GX_MISC);
+
+ /* Power up the DAC */
+ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+
+ /* Disable gamma correction */
+ misc |= GX_MISC_GAM_EN;
+
+ writel(misc, par->vid_regs + GX_MISC);
+ /* Write the display configuration */
dcfg = readl(par->vid_regs + GX_DCFG);
+ /* Disable hsync and vsync */
+ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+ writel(dcfg, par->vid_regs + GX_DCFG);
+
/* Clear bits from existing mode. */
dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
| GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
dcfg |= GX_DCFG_CRT_VSYNC_POL;
+ /* Enable the display logic */
+ /* Set up the DACS to blank normally */
+
+ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
+
+ /* Enable the external DAC VREF? */
+
writel(dcfg, par->vid_regs + GX_DCFG);
- /* Power on flat panel. */
- fp_pm = readl(par->vid_regs + GX_FP_PM);
- fp_pm |= GX_FP_PM_P;
- writel(fp_pm, par->vid_regs + GX_FP_PM);
+ /* Set up the flat panel (if it is enabled) */
+
+ if (par->enable_crt == 0)
+ gx_configure_tft(info);
}
static int gx_blank_display(struct fb_info *info, int blank_mode)
writel(dcfg, par->vid_regs + GX_DCFG);
/* Power on/off flat panel. */
- fp_pm = readl(par->vid_regs + GX_FP_PM);
- if (blank_mode == FB_BLANK_POWERDOWN)
- fp_pm &= ~GX_FP_PM_P;
- else
- fp_pm |= GX_FP_PM_P;
- writel(fp_pm, par->vid_regs + GX_FP_PM);
+
+ if (par->enable_crt == 0) {
+ fp_pm = readl(par->vid_regs + GX_FP_PM);
+ if (blank_mode == FB_BLANK_POWERDOWN)
+ fp_pm &= ~GX_FP_PM_P;
+ else
+ fp_pm |= GX_FP_PM_P;
+ writel(fp_pm, par->vid_regs + GX_FP_PM);
+ }
return 0;
}
extern struct geode_vid_ops gx_vid_ops;
+/* GX Flatpanel control MSR */
+#define GX_VP_MSR_PAD_SELECT 0xC0002011
+#define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF
+#define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF
+
/* Geode GX video processor registers */
#define GX_DCFG 0x0008
# define GX_DCFG_HSYNC_EN 0x00000002
# define GX_DCFG_VSYNC_EN 0x00000004
# define GX_DCFG_DAC_BL_EN 0x00000008
+# define GX_DCFG_FP_PWR_EN 0x00000040
+# define GX_DCFG_FP_DATA_EN 0x00000080
# define GX_DCFG_CRT_HSYNC_POL 0x00000100
# define GX_DCFG_CRT_VSYNC_POL 0x00000200
# define GX_DCFG_CRT_SYNC_SKW_MASK 0x0001C000
# define GX_DCFG_GV_GAM 0x00200000
# define GX_DCFG_DAC_VREF 0x04000000
+/* Geode GX MISC video configuration */
+
+#define GX_MISC 0x50
+#define GX_MISC_GAM_EN 0x00000001
+#define GX_MISC_DAC_PWRDN 0x00000400
+#define GX_MISC_A_PWRDN 0x00000800
+
/* Geode GX flat panel display control registers */
+
+#define GX_FP_PT1 0x0400
+#define GX_FP_PT1_VSIZE_MASK 0x7FF0000
+#define GX_FP_PT1_VSIZE_SHIFT 16
+
+#define GX_FP_PT2 0x408
+#define GX_FP_PT2_VSP (1 << 23)
+#define GX_FP_PT2_HSP (1 << 22)
+
#define GX_FP_PM 0x410
# define GX_FP_PM_P 0x01000000
+#define GX_FP_DFC 0x418
+
/* Geode GX clock control MSRs */
#define MSR_GLCP_SYS_RSTPLL 0x4c000014
--- /dev/null
+/*
+ * Frame buffer device for IBM GXT4500P display adaptor
+ *
+ * Copyright (C) 2006 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/delay.h>
+
+#define PCI_DEVICE_ID_IBM_GXT4500P 0x21c
+
+/* GXT4500P registers */
+
+/* Registers in PCI config space */
+#define CFG_ENDIAN0 0x40
+
+/* Misc control/status registers */
+#define STATUS 0x1000
+#define CTRL_REG0 0x1004
+#define CR0_HALT_DMA 0x4
+#define CR0_RASTER_RESET 0x8
+#define CR0_GEOM_RESET 0x10
+#define CR0_MEM_CTRLER_RESET 0x20
+
+/* Framebuffer control registers */
+#define FB_AB_CTRL 0x1100
+#define FB_CD_CTRL 0x1104
+#define FB_WID_CTRL 0x1108
+#define FB_Z_CTRL 0x110c
+#define FB_VGA_CTRL 0x1110
+#define REFRESH_AB_CTRL 0x1114
+#define REFRESH_CD_CTRL 0x1118
+#define FB_OVL_CTRL 0x111c
+#define FB_CTRL_TYPE 0x80000000
+#define FB_CTRL_WIDTH_MASK 0x007f0000
+#define FB_CTRL_WIDTH_SHIFT 16
+#define FB_CTRL_START_SEG_MASK 0x00003fff
+
+#define REFRESH_START 0x1098
+#define REFRESH_SIZE 0x109c
+
+/* "Direct" framebuffer access registers */
+#define DFA_FB_A 0x11e0
+#define DFA_FB_B 0x11e4
+#define DFA_FB_C 0x11e8
+#define DFA_FB_D 0x11ec
+#define DFA_FB_ENABLE 0x80000000
+#define DFA_FB_BASE_MASK 0x03f00000
+#define DFA_FB_STRIDE_1k 0x00000000
+#define DFA_FB_STRIDE_2k 0x00000010
+#define DFA_FB_STRIDE_4k 0x00000020
+#define DFA_PIX_8BIT 0x00000000
+#define DFA_PIX_16BIT_565 0x00000001
+#define DFA_PIX_16BIT_1555 0x00000002
+#define DFA_PIX_24BIT 0x00000004
+#define DFA_PIX_32BIT 0x00000005
+
+/* maps DFA_PIX_* to pixel size in bytes */
+static const unsigned char pixsize[] = {
+ 1, 2, 2, 2, 4, 4
+};
+
+/* Display timing generator registers */
+#define DTG_CONTROL 0x1900
+#define DTG_CTL_SCREEN_REFRESH 2
+#define DTG_CTL_ENABLE 1
+#define DTG_HORIZ_EXTENT 0x1904
+#define DTG_HORIZ_DISPLAY 0x1908
+#define DTG_HSYNC_START 0x190c
+#define DTG_HSYNC_END 0x1910
+#define DTG_HSYNC_END_COMP 0x1914
+#define DTG_VERT_EXTENT 0x1918
+#define DTG_VERT_DISPLAY 0x191c
+#define DTG_VSYNC_START 0x1920
+#define DTG_VSYNC_END 0x1924
+#define DTG_VERT_SHORT 0x1928
+
+/* PLL/RAMDAC registers */
+#define DISP_CTL 0x402c
+#define DISP_CTL_OFF 2
+#define SYNC_CTL 0x4034
+#define SYNC_CTL_SYNC_ON_RGB 1
+#define SYNC_CTL_SYNC_OFF 2
+#define SYNC_CTL_HSYNC_INV 8
+#define SYNC_CTL_VSYNC_INV 0x10
+#define SYNC_CTL_HSYNC_OFF 0x20
+#define SYNC_CTL_VSYNC_OFF 0x40
+
+#define PLL_M 0x4040
+#define PLL_N 0x4044
+#define PLL_POSTDIV 0x4048
+
+/* Hardware cursor */
+#define CURSOR_X 0x4078
+#define CURSOR_Y 0x407c
+#define CURSOR_HOTSPOT 0x4080
+#define CURSOR_MODE 0x4084
+#define CURSOR_MODE_OFF 0
+#define CURSOR_MODE_4BPP 1
+#define CURSOR_PIXMAP 0x5000
+#define CURSOR_CMAP 0x7400
+
+/* Window attribute table */
+#define WAT_FMT 0x4100
+#define WAT_FMT_24BIT 0
+#define WAT_FMT_16BIT_565 1
+#define WAT_FMT_16BIT_1555 2
+#define WAT_FMT_32BIT 3 /* 0 vs. 3 is a guess */
+#define WAT_FMT_8BIT_332 9
+#define WAT_FMT_8BIT 0xa
+#define WAT_FMT_NO_CMAP 4 /* ORd in to other values */
+#define WAT_CMAP_OFFSET 0x4104 /* 4-bit value gets << 6 */
+#define WAT_CTRL 0x4108
+#define WAT_CTRL_SEL_B 1 /* select B buffer if 1 */
+#define WAT_CTRL_NO_INC 2
+#define WAT_GAMMA_CTRL 0x410c
+#define WAT_GAMMA_DISABLE 1 /* disables gamma cmap */
+#define WAT_OVL_CTRL 0x430c /* controls overlay */
+
+/* Indexed by DFA_PIX_* values */
+static const unsigned char watfmt[] = {
+ WAT_FMT_8BIT, WAT_FMT_16BIT_565, WAT_FMT_16BIT_1555, 0,
+ WAT_FMT_24BIT, WAT_FMT_32BIT
+};
+
+/* Colormap array; 1k entries of 4 bytes each */
+#define CMAP 0x6000
+
+#define readreg(par, reg) readl((par)->regs + (reg))
+#define writereg(par, reg, val) writel((val), (par)->regs + (reg))
+
+struct gxt4500_par {
+ void __iomem *regs;
+
+ int pixfmt; /* pixel format, see DFA_PIX_* values */
+
+ /* PLL parameters */
+ int pll_m; /* ref clock divisor */
+ int pll_n; /* VCO divisor */
+ int pll_pd1; /* first post-divisor */
+ int pll_pd2; /* second post-divisor */
+
+ u32 pseudo_palette[16]; /* used in color blits */
+};
+
+/* mode requested by user */
+static char *mode_option;
+
+/* default mode: 1280x1024 @ 60 Hz, 8 bpp */
+static const struct fb_videomode defaultmode __devinitdata = {
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 1024,
+ .pixclock = 9295,
+ .left_margin = 248,
+ .right_margin = 48,
+ .upper_margin = 38,
+ .lower_margin = 1,
+ .hsync_len = 112,
+ .vsync_len = 3,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+/*
+ * The refclk and VCO dividers appear to use a linear feedback shift
+ * register, which gets reloaded when it reaches a terminal value, at
+ * which point the divider output is toggled. Thus one can obtain
+ * whatever divisor is required by putting the appropriate value into
+ * the reload register. For a divisor of N, one puts the value from
+ * the LFSR sequence that comes N-1 places before the terminal value
+ * into the reload register.
+ */
+
+static const unsigned char mdivtab[] = {
+/* 1 */ 0x3f, 0x00, 0x20, 0x10, 0x28, 0x14, 0x2a, 0x15, 0x0a,
+/* 10 */ 0x25, 0x32, 0x19, 0x0c, 0x26, 0x13, 0x09, 0x04, 0x22, 0x11,
+/* 20 */ 0x08, 0x24, 0x12, 0x29, 0x34, 0x1a, 0x2d, 0x36, 0x1b, 0x0d,
+/* 30 */ 0x06, 0x23, 0x31, 0x38, 0x1c, 0x2e, 0x17, 0x0b, 0x05, 0x02,
+/* 40 */ 0x21, 0x30, 0x18, 0x2c, 0x16, 0x2b, 0x35, 0x3a, 0x1d, 0x0e,
+/* 50 */ 0x27, 0x33, 0x39, 0x3c, 0x1e, 0x2f, 0x37, 0x3b, 0x3d, 0x3e,
+/* 60 */ 0x1f, 0x0f, 0x07, 0x03, 0x01,
+};
+
+static const unsigned char ndivtab[] = {
+/* 2 */ 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0x78, 0xbc, 0x5e,
+/* 10 */ 0x2f, 0x17, 0x0b, 0x85, 0xc2, 0xe1, 0x70, 0x38, 0x9c, 0x4e,
+/* 20 */ 0xa7, 0xd3, 0xe9, 0xf4, 0xfa, 0xfd, 0xfe, 0x7f, 0xbf, 0xdf,
+/* 30 */ 0xef, 0x77, 0x3b, 0x1d, 0x8e, 0xc7, 0xe3, 0x71, 0xb8, 0xdc,
+/* 40 */ 0x6e, 0xb7, 0x5b, 0x2d, 0x16, 0x8b, 0xc5, 0xe2, 0xf1, 0xf8,
+/* 50 */ 0xfc, 0x7e, 0x3f, 0x9f, 0xcf, 0x67, 0xb3, 0xd9, 0x6c, 0xb6,
+/* 60 */ 0xdb, 0x6d, 0x36, 0x9b, 0x4d, 0x26, 0x13, 0x89, 0xc4, 0x62,
+/* 70 */ 0xb1, 0xd8, 0xec, 0xf6, 0xfb, 0x7d, 0xbe, 0x5f, 0xaf, 0x57,
+/* 80 */ 0x2b, 0x95, 0x4a, 0x25, 0x92, 0x49, 0xa4, 0x52, 0x29, 0x94,
+/* 90 */ 0xca, 0x65, 0xb2, 0x59, 0x2c, 0x96, 0xcb, 0xe5, 0xf2, 0x79,
+/* 100 */ 0x3c, 0x1e, 0x0f, 0x07, 0x83, 0x41, 0x20, 0x90, 0x48, 0x24,
+/* 110 */ 0x12, 0x09, 0x84, 0x42, 0xa1, 0x50, 0x28, 0x14, 0x8a, 0x45,
+/* 120 */ 0xa2, 0xd1, 0xe8, 0x74, 0xba, 0xdd, 0xee, 0xf7, 0x7b, 0x3d,
+/* 130 */ 0x9e, 0x4f, 0x27, 0x93, 0xc9, 0xe4, 0x72, 0x39, 0x1c, 0x0e,
+/* 140 */ 0x87, 0xc3, 0x61, 0x30, 0x18, 0x8c, 0xc6, 0x63, 0x31, 0x98,
+/* 150 */ 0xcc, 0xe6, 0x73, 0xb9, 0x5c, 0x2e, 0x97, 0x4b, 0xa5, 0xd2,
+/* 160 */ 0x69, 0xb4, 0xda, 0xed, 0x76, 0xbb, 0x5d, 0xae, 0xd7, 0x6b,
+/* 170 */ 0xb5, 0x5a, 0xad, 0x56, 0xab, 0xd5, 0x6a, 0x35, 0x1a, 0x8d,
+/* 180 */ 0x46, 0x23, 0x11, 0x88, 0x44, 0x22, 0x91, 0xc8, 0x64, 0x32,
+/* 190 */ 0x19, 0x0c, 0x86, 0x43, 0x21, 0x10, 0x08, 0x04, 0x02, 0x81,
+/* 200 */ 0x40, 0xa0, 0xd0, 0x68, 0x34, 0x9a, 0xcd, 0x66, 0x33, 0x99,
+/* 210 */ 0x4c, 0xa6, 0x53, 0xa9, 0xd4, 0xea, 0x75, 0x3a, 0x9d, 0xce,
+/* 220 */ 0xe7, 0xf3, 0xf9, 0x7c, 0x3e, 0x1f, 0x8f, 0x47, 0xa3, 0x51,
+/* 230 */ 0xa8, 0x54, 0xaa, 0x55, 0x2a, 0x15, 0x0a, 0x05, 0x82, 0xc1,
+/* 240 */ 0x60, 0xb0, 0x58, 0xac, 0xd6, 0xeb, 0xf5, 0x7a, 0xbd, 0xde,
+/* 250 */ 0x6f, 0x37, 0x1b, 0x0d, 0x06, 0x03, 0x01,
+};
+
+#define REF_PERIOD_PS 9259 /* period of reference clock in ps */
+
+static int calc_pll(int period_ps, struct gxt4500_par *par)
+{
+ int m, n, pdiv1, pdiv2, postdiv;
+ int pll_period, best_error, t;
+
+ /* only deal with range 1MHz - 400MHz */
+ if (period_ps < 2500 || period_ps > 1000000)
+ return -1;
+
+ best_error = 1000000;
+ for (pdiv1 = 1; pdiv1 <= 8; ++pdiv1) {
+ for (pdiv2 = 1; pdiv2 <= pdiv1; ++pdiv2) {
+ postdiv = pdiv1 * pdiv2;
+ pll_period = (period_ps + postdiv - 1) / postdiv;
+ /* keep pll in range 500..1250 MHz */
+ if (pll_period < 800 || pll_period > 2000)
+ continue;
+ for (m = 3; m <= 40; ++m) {
+ n = REF_PERIOD_PS * m * postdiv / period_ps;
+ if (n < 5 || n > 256)
+ continue;
+ t = REF_PERIOD_PS * m * postdiv / n;
+ t -= period_ps;
+ if (t >= 0 && t < best_error) {
+ par->pll_m = m;
+ par->pll_n = n;
+ par->pll_pd1 = pdiv1;
+ par->pll_pd2 = pdiv2;
+ best_error = t;
+ }
+ }
+ }
+ }
+ if (best_error == 1000000)
+ return -1;
+ return 0;
+}
+
+static int calc_pixclock(struct gxt4500_par *par)
+{
+ return REF_PERIOD_PS * par->pll_m * par->pll_pd1 * par->pll_pd2
+ / par->pll_n;
+}
+
+static int gxt4500_var_to_par(struct fb_var_screeninfo *var,
+ struct gxt4500_par *par)
+{
+ if (var->xres + var->xoffset > var->xres_virtual ||
+ var->yres + var->yoffset > var->yres_virtual ||
+ var->xres_virtual > 4096)
+ return -EINVAL;
+ if ((var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
+ return -EINVAL;
+
+ if (calc_pll(var->pixclock, par) < 0)
+ return -EINVAL;
+
+ switch (var->bits_per_pixel) {
+ case 32:
+ if (var->transp.length)
+ par->pixfmt = DFA_PIX_32BIT;
+ else
+ par->pixfmt = DFA_PIX_24BIT;
+ break;
+ case 24:
+ par->pixfmt = DFA_PIX_24BIT;
+ break;
+ case 16:
+ if (var->green.length == 5)
+ par->pixfmt = DFA_PIX_16BIT_1555;
+ else
+ par->pixfmt = DFA_PIX_16BIT_565;
+ break;
+ case 8:
+ par->pixfmt = DFA_PIX_8BIT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct fb_bitfield eightbits = {0, 8};
+static const struct fb_bitfield nobits = {0, 0};
+
+static void gxt4500_unpack_pixfmt(struct fb_var_screeninfo *var,
+ int pixfmt)
+{
+ var->bits_per_pixel = pixsize[pixfmt] * 8;
+ var->red = eightbits;
+ var->green = eightbits;
+ var->blue = eightbits;
+ var->transp = nobits;
+
+ switch (pixfmt) {
+ case DFA_PIX_16BIT_565:
+ var->red.length = 5;
+ var->green.length = 6;
+ var->blue.length = 5;
+ break;
+ case DFA_PIX_16BIT_1555:
+ var->red.length = 5;
+ var->green.length = 5;
+ var->blue.length = 5;
+ var->transp.length = 1;
+ break;
+ case DFA_PIX_32BIT:
+ var->transp.length = 8;
+ break;
+ }
+ if (pixfmt != DFA_PIX_8BIT) {
+ var->green.offset = var->red.length;
+ var->blue.offset = var->green.offset + var->green.length;
+ if (var->transp.length)
+ var->transp.offset =
+ var->blue.offset + var->blue.length;
+ }
+}
+
+static int gxt4500_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct gxt4500_par par;
+ int err;
+
+ par = *(struct gxt4500_par *)info->par;
+ err = gxt4500_var_to_par(var, &par);
+ if (!err) {
+ var->pixclock = calc_pixclock(&par);
+ gxt4500_unpack_pixfmt(var, par.pixfmt);
+ }
+ return err;
+}
+
+static int gxt4500_set_par(struct fb_info *info)
+{
+ struct gxt4500_par *par = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ int err;
+ u32 ctrlreg;
+ unsigned int dfa_ctl, pixfmt, stride;
+ unsigned int wid_tiles, i;
+ unsigned int prefetch_pix, htot;
+ struct gxt4500_par save_par;
+
+ save_par = *par;
+ err = gxt4500_var_to_par(var, par);
+ if (err) {
+ *par = save_par;
+ return err;
+ }
+
+ /* turn off DTG for now */
+ ctrlreg = readreg(par, DTG_CONTROL);
+ ctrlreg &= ~(DTG_CTL_ENABLE | DTG_CTL_SCREEN_REFRESH);
+ writereg(par, DTG_CONTROL, ctrlreg);
+
+ /* set PLL registers */
+ writereg(par, PLL_M, mdivtab[par->pll_m - 1]);
+ writereg(par, PLL_N, ndivtab[par->pll_n - 2]);
+ writereg(par, PLL_POSTDIV,
+ ((8 - par->pll_pd1) << 3) | (8 - par->pll_pd2));
+ msleep(20);
+
+ /* turn off hardware cursor */
+ writereg(par, CURSOR_MODE, CURSOR_MODE_OFF);
+
+ /* reset raster engine */
+ writereg(par, CTRL_REG0, CR0_RASTER_RESET | (CR0_RASTER_RESET << 16));
+ udelay(10);
+ writereg(par, CTRL_REG0, CR0_RASTER_RESET << 16);
+
+ /* set display timing generator registers */
+ htot = var->xres + var->left_margin + var->right_margin +
+ var->hsync_len;
+ writereg(par, DTG_HORIZ_EXTENT, htot - 1);
+ writereg(par, DTG_HORIZ_DISPLAY, var->xres - 1);
+ writereg(par, DTG_HSYNC_START, var->xres + var->right_margin - 1);
+ writereg(par, DTG_HSYNC_END,
+ var->xres + var->right_margin + var->hsync_len - 1);
+ writereg(par, DTG_HSYNC_END_COMP,
+ var->xres + var->right_margin + var->hsync_len - 1);
+ writereg(par, DTG_VERT_EXTENT,
+ var->yres + var->upper_margin + var->lower_margin +
+ var->vsync_len - 1);
+ writereg(par, DTG_VERT_DISPLAY, var->yres - 1);
+ writereg(par, DTG_VSYNC_START, var->yres + var->lower_margin - 1);
+ writereg(par, DTG_VSYNC_END,
+ var->yres + var->lower_margin + var->vsync_len - 1);
+ prefetch_pix = 3300000 / var->pixclock;
+ if (prefetch_pix >= htot)
+ prefetch_pix = htot - 1;
+ writereg(par, DTG_VERT_SHORT, htot - prefetch_pix - 1);
+ ctrlreg |= DTG_CTL_ENABLE | DTG_CTL_SCREEN_REFRESH;
+ writereg(par, DTG_CONTROL, ctrlreg);
+
+ /* calculate stride in DFA aperture */
+ if (var->xres_virtual > 2048) {
+ stride = 4096;
+ dfa_ctl = DFA_FB_STRIDE_4k;
+ } else if (var->xres_virtual > 1024) {
+ stride = 2048;
+ dfa_ctl = DFA_FB_STRIDE_2k;
+ } else {
+ stride = 1024;
+ dfa_ctl = DFA_FB_STRIDE_1k;
+ }
+
+ /* Set up framebuffer definition */
+ wid_tiles = (var->xres_virtual + 63) >> 6;
+
+ /* XXX add proper FB allocation here someday */
+ writereg(par, FB_AB_CTRL, FB_CTRL_TYPE | (wid_tiles << 16) | 0);
+ writereg(par, REFRESH_AB_CTRL, FB_CTRL_TYPE | (wid_tiles << 16) | 0);
+ writereg(par, FB_CD_CTRL, FB_CTRL_TYPE | (wid_tiles << 16) | 0);
+ writereg(par, REFRESH_CD_CTRL, FB_CTRL_TYPE | (wid_tiles << 16) | 0);
+ writereg(par, REFRESH_START, (var->xoffset << 16) | var->yoffset);
+ writereg(par, REFRESH_SIZE, (var->xres << 16) | var->yres);
+
+ /* Set up framebuffer access by CPU */
+
+ pixfmt = par->pixfmt;
+ dfa_ctl |= DFA_FB_ENABLE | pixfmt;
+ writereg(par, DFA_FB_A, dfa_ctl);
+
+ /*
+ * Set up window attribute table.
+ * We set all WAT entries the same so it doesn't matter what the
+ * window ID (WID) plane contains.
+ */
+ for (i = 0; i < 32; ++i) {
+ writereg(par, WAT_FMT + (i << 4), watfmt[pixfmt]);
+ writereg(par, WAT_CMAP_OFFSET + (i << 4), 0);
+ writereg(par, WAT_CTRL + (i << 4), 0);
+ writereg(par, WAT_GAMMA_CTRL + (i << 4), WAT_GAMMA_DISABLE);
+ }
+
+ /* Set sync polarity etc. */
+ ctrlreg = readreg(par, SYNC_CTL) &
+ ~(SYNC_CTL_SYNC_ON_RGB | SYNC_CTL_HSYNC_INV |
+ SYNC_CTL_VSYNC_INV);
+ if (var->sync & FB_SYNC_ON_GREEN)
+ ctrlreg |= SYNC_CTL_SYNC_ON_RGB;
+ if (!(var->sync & FB_SYNC_HOR_HIGH_ACT))
+ ctrlreg |= SYNC_CTL_HSYNC_INV;
+ if (!(var->sync & FB_SYNC_VERT_HIGH_ACT))
+ ctrlreg |= SYNC_CTL_VSYNC_INV;
+ writereg(par, SYNC_CTL, ctrlreg);
+
+ info->fix.line_length = stride * pixsize[pixfmt];
+ info->fix.visual = (pixfmt == DFA_PIX_8BIT)? FB_VISUAL_PSEUDOCOLOR:
+ FB_VISUAL_DIRECTCOLOR;
+
+ return 0;
+}
+
+static int gxt4500_setcolreg(unsigned int reg, unsigned int red,
+ unsigned int green, unsigned int blue,
+ unsigned int transp, struct fb_info *info)
+{
+ u32 cmap_entry;
+ struct gxt4500_par *par = info->par;
+
+ if (reg > 1023)
+ return 1;
+ cmap_entry = ((transp & 0xff00) << 16) | ((blue & 0xff00) << 8) |
+ (green & 0xff00) | (red >> 8);
+ writereg(par, CMAP + reg * 4, cmap_entry);
+
+ if (reg < 16 && par->pixfmt != DFA_PIX_8BIT) {
+ u32 *pal = info->pseudo_palette;
+ u32 val = reg;
+ switch (par->pixfmt) {
+ case DFA_PIX_16BIT_565:
+ val |= (reg << 11) | (reg << 6);
+ break;
+ case DFA_PIX_16BIT_1555:
+ val |= (reg << 10) | (reg << 5);
+ break;
+ case DFA_PIX_32BIT:
+ val |= (reg << 24);
+ /* fall through */
+ case DFA_PIX_24BIT:
+ val |= (reg << 16) | (reg << 8);
+ break;
+ }
+ pal[reg] = val;
+ }
+
+ return 0;
+}
+
+static int gxt4500_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct gxt4500_par *par = info->par;
+
+ if (var->xoffset & 7)
+ return -EINVAL;
+ if (var->xoffset + var->xres > var->xres_virtual ||
+ var->yoffset + var->yres > var->yres_virtual)
+ return -EINVAL;
+
+ writereg(par, REFRESH_START, (var->xoffset << 16) | var->yoffset);
+ return 0;
+}
+
+static int gxt4500_blank(int blank, struct fb_info *info)
+{
+ struct gxt4500_par *par = info->par;
+ int ctrl, dctl;
+
+ ctrl = readreg(par, SYNC_CTL);
+ ctrl &= ~(SYNC_CTL_SYNC_OFF | SYNC_CTL_HSYNC_OFF | SYNC_CTL_VSYNC_OFF);
+ dctl = readreg(par, DISP_CTL);
+ dctl |= DISP_CTL_OFF;
+ switch (blank) {
+ case FB_BLANK_UNBLANK:
+ dctl &= ~DISP_CTL_OFF;
+ break;
+ case FB_BLANK_POWERDOWN:
+ ctrl |= SYNC_CTL_SYNC_OFF;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ ctrl |= SYNC_CTL_HSYNC_OFF;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ ctrl |= SYNC_CTL_VSYNC_OFF;
+ break;
+ default: ;
+ }
+ writereg(par, SYNC_CTL, ctrl);
+ writereg(par, DISP_CTL, dctl);
+
+ return 0;
+}
+
+static const struct fb_fix_screeninfo gxt4500_fix __devinitdata = {
+ .id = "IBM GXT4500P",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_PSEUDOCOLOR,
+ .xpanstep = 8,
+ .ypanstep = 1,
+ .mmio_len = 0x20000,
+};
+
+static struct fb_ops gxt4500_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = gxt4500_check_var,
+ .fb_set_par = gxt4500_set_par,
+ .fb_setcolreg = gxt4500_setcolreg,
+ .fb_pan_display = gxt4500_pan_display,
+ .fb_blank = gxt4500_blank,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+/* PCI functions */
+static int __devinit gxt4500_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err;
+ unsigned long reg_phys, fb_phys;
+ struct gxt4500_par *par;
+ struct fb_info *info;
+ struct fb_var_screeninfo var;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "gxt4500: cannot enable PCI device: %d\n",
+ err);
+ return err;
+ }
+
+ reg_phys = pci_resource_start(pdev, 0);
+ if (!request_mem_region(reg_phys, pci_resource_len(pdev, 0),
+ "gxt4500 regs")) {
+ dev_err(&pdev->dev, "gxt4500: cannot get registers\n");
+ goto err_nodev;
+ }
+
+ fb_phys = pci_resource_start(pdev, 1);
+ if (!request_mem_region(fb_phys, pci_resource_len(pdev, 1),
+ "gxt4500 FB")) {
+ dev_err(&pdev->dev, "gxt4500: cannot get framebuffer\n");
+ goto err_free_regs;
+ }
+
+ info = framebuffer_alloc(sizeof(struct gxt4500_par), &pdev->dev);
+ if (!info) {
+ dev_err(&pdev->dev, "gxt4500: cannot alloc FB info record");
+ goto err_free_fb;
+ }
+ par = info->par;
+ info->fix = gxt4500_fix;
+ info->pseudo_palette = par->pseudo_palette;
+
+ info->fix.mmio_start = reg_phys;
+ par->regs = ioremap(reg_phys, pci_resource_len(pdev, 0));
+ if (!par->regs) {
+ dev_err(&pdev->dev, "gxt4500: cannot map registers\n");
+ goto err_free_all;
+ }
+
+ info->fix.smem_start = fb_phys;
+ info->fix.smem_len = pci_resource_len(pdev, 1);
+ info->screen_base = ioremap(fb_phys, pci_resource_len(pdev, 1));
+ if (!info->screen_base) {
+ dev_err(&pdev->dev, "gxt4500: cannot map framebuffer\n");
+ goto err_unmap_regs;
+ }
+
+ pci_set_drvdata(pdev, info);
+
+ /* Set byte-swapping for DFA aperture for all pixel sizes */
+ pci_write_config_dword(pdev, CFG_ENDIAN0, 0x333300);
+
+ info->fbops = &gxt4500_ops;
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ err = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (err) {
+ dev_err(&pdev->dev, "gxt4500: cannot allocate cmap\n");
+ goto err_unmap_all;
+ }
+
+ gxt4500_blank(FB_BLANK_UNBLANK, info);
+
+ if (!fb_find_mode(&var, info, mode_option, NULL, 0, &defaultmode, 8)) {
+ dev_err(&pdev->dev, "gxt4500: cannot find valid video mode\n");
+ goto err_free_cmap;
+ }
+ info->var = var;
+ if (gxt4500_set_par(info)) {
+ printk(KERN_ERR "gxt4500: cannot set video mode\n");
+ goto err_free_cmap;
+ }
+
+ if (register_framebuffer(info) < 0) {
+ dev_err(&pdev->dev, "gxt4500: cannot register framebuffer\n");
+ goto err_free_cmap;
+ }
+ printk(KERN_INFO "fb%d: %s frame buffer device\n",
+ info->node, info->fix.id);
+
+ return 0;
+
+ err_free_cmap:
+ fb_dealloc_cmap(&info->cmap);
+ err_unmap_all:
+ iounmap(info->screen_base);
+ err_unmap_regs:
+ iounmap(par->regs);
+ err_free_all:
+ framebuffer_release(info);
+ err_free_fb:
+ release_mem_region(fb_phys, pci_resource_len(pdev, 1));
+ err_free_regs:
+ release_mem_region(reg_phys, pci_resource_len(pdev, 0));
+ err_nodev:
+ return -ENODEV;
+}
+
+static void __devexit gxt4500_remove(struct pci_dev *pdev)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct gxt4500_par *par;
+
+ if (!info)
+ return;
+ par = info->par;
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+ iounmap(par->regs);
+ iounmap(info->screen_base);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ release_mem_region(pci_resource_start(pdev, 1),
+ pci_resource_len(pdev, 1));
+ framebuffer_release(info);
+}
+
+/* supported chipsets */
+static const struct pci_device_id gxt4500_pci_tbl[] = {
+ { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_GXT4500P,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, gxt4500_pci_tbl);
+
+static struct pci_driver gxt4500_driver = {
+ .name = "gxt4500",
+ .id_table = gxt4500_pci_tbl,
+ .probe = gxt4500_probe,
+ .remove = __devexit_p(gxt4500_remove),
+};
+
+static int __devinit gxt4500_init(void)
+{
+#ifndef MODULE
+ if (fb_get_options("gxt4500", &mode_option))
+ return -ENODEV;
+#endif
+
+ return pci_register_driver(&gxt4500_driver);
+}
+module_init(gxt4500_init);
+
+static void __exit gxt4500_exit(void)
+{
+ pci_unregister_driver(&gxt4500_driver);
+}
+module_exit(gxt4500_exit);
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("FBDev driver for IBM GXT4500P");
+MODULE_LICENSE("GPL");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\"");
if (register_framebuffer(&fb_info) < 0) {
fb_dealloc_cmap(&fb_info.cmap);
+ iounmap(fb_info.screen_base);
+ fb_info.screen_base = NULL;
return 1;
}
void i810_delete_i2c_busses(struct i810fb_par *par)
{
if (par->chan[0].par)
- i2c_bit_del_bus(&par->chan[0].adapter);
+ i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
- i2c_bit_del_bus(&par->chan[1].adapter);
+ i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
- i2c_bit_del_bus(&par->chan[2].adapter);
+ i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
if (e != NULL) {
DPRINTK("i810-i2c: Getting EDID from BIOS\n");
- edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
- if (edid)
- memcpy(edid, e, EDID_LENGTH);
+ edid = kmemdup(e, EDID_LENGTH, GFP_KERNEL);
}
}
if (!con_is_present())
return -ENXIO;
- pdev = pci_find_device(PCI_VENDOR_ID_INTERG,
+ pdev = pci_get_device(PCI_VENDOR_ID_INTERG,
PCI_DEVICE_ID_INTERG_1682, 0);
if (pdev == NULL) {
/*
* XXX We tried to use cyber2000fb.c for IGS 2000.
* But it does not initialize the chip in JavaStation-E, alas.
*/
- pdev = pci_find_device(PCI_VENDOR_ID_INTERG, 0x2000, 0);
+ pdev = pci_get_device(PCI_VENDOR_ID_INTERG, 0x2000, 0);
if(pdev == NULL) {
return -ENXIO;
}
iga2000 = 1;
}
+ /* We leak a reference here but as it cannot be unloaded this is
+ fine. If you write unload code remember to free it in unload */
size = sizeof(struct fb_info) + sizeof(struct iga_par) + sizeof(u32)*16;
for (i = 0; i < MAX_OUTPUTS; i++) {
if (dinfo->output[i].i2c_bus.dinfo) {
- i2c_bit_del_bus(&dinfo->output[i].i2c_bus.adapter);
+ i2c_del_adapter(&dinfo->output[i].i2c_bus.adapter);
dinfo->output[i].i2c_bus.dinfo = NULL;
}
if (dinfo->output[i].ddc_bus.dinfo) {
- i2c_bit_del_bus(&dinfo->output[i].ddc_bus.adapter);
+ i2c_del_adapter(&dinfo->output[i].ddc_bus.adapter);
dinfo->output[i].ddc_bus.dinfo = NULL;
}
}
u8 *edid_d = NULL;
if (edid_s) {
- edid_d = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ edid_d = kmemdup(edid_s, EDID_LENGTH, GFP_KERNEL);
if (edid_d) {
- memcpy(edid_d, edid_s, EDID_LENGTH);
fb_edid_to_monspecs(edid_d,
&dinfo->info->monspecs);
kfree(edid_d);
}
}
+static void __init iounmap_macfb(void)
+{
+ if (valkyrie_cmap_regs)
+ iounmap(valkyrie_cmap_regs);
+ if (dafb_cmap_regs)
+ iounmap(dafb_cmap_regs);
+ if (v8_brazil_cmap_regs)
+ iounmap(v8_brazil_cmap_regs);
+ if (rbv_cmap_regs)
+ iounmap(rbv_cmap_regs);
+ if (civic_cmap_regs)
+ iounmap(civic_cmap_regs);
+ if (csc_cmap_regs)
+ iounmap(csc_cmap_regs);
+}
+
static int __init macfb_init(void)
{
int video_cmap_len, video_is_nubus = 0;
if (!err)
printk("fb%d: %s frame buffer device\n",
fb_info.node, fb_info.fix.id);
+ else {
+ iounmap(fb_info.screen_base);
+ iounmap_macfb();
+ }
return err;
}
static void i2c_bit_bus_del(struct i2c_bit_adapter* b) {
if (b->initialized) {
- i2c_bit_del_bus(&b->adapter);
+ i2c_del_adapter(&b->adapter);
b->initialized = 0;
}
}
unsigned long flags;
struct matroxfb_dh_maven_info* m2info;
- m2info = (struct matroxfb_dh_maven_info*)kmalloc(sizeof(*m2info), GFP_KERNEL);
+ m2info = kmalloc(sizeof(*m2info), GFP_KERNEL);
if (!m2info)
return NULL;
}
#ifdef CONFIG_FB_MATROX_MULTIHEAD
- minfo = (struct matrox_fb_info*)kmalloc(sizeof(*minfo), GFP_KERNEL);
+ minfo = kmalloc(sizeof(*minfo), GFP_KERNEL);
if (!minfo)
return -1;
#else
/* hardware is CRTC2 incapable... */
if (!ACCESS_FBINFO(devflags.crtc2))
return NULL;
- m2info = (struct matroxfb_dh_fb_info*)kmalloc(sizeof(*m2info), GFP_KERNEL);
+ m2info = kmalloc(sizeof(*m2info), GFP_KERNEL);
if (!m2info) {
printk(KERN_ERR "matroxfb_crtc2: Not enough memory for CRTC2 control structs\n");
return NULL;
struct dentry *clock;
struct dentry *display;
struct dentry *gsctl;
+ struct dentry *sdram;
+ struct dentry *misc;
};
static int open_file_generic(struct inode *inode, struct file *file)
{
char * s = big_buffer;
- s += sprintf(s, "SYSCFG = %08lx\n", SYSCFG);
- s += sprintf(s, "PFBASE = %08lx\n", PFBASE);
- s += sprintf(s, "PFCEIL = %08lx\n", PFCEIL);
- s += sprintf(s, "POLLFLAG = %08lx\n", POLLFLAG);
- s += sprintf(s, "SYSRST = %08lx\n", SYSRST);
+ s += sprintf(s, "SYSCFG = %08x\n", readl(SYSCFG));
+ s += sprintf(s, "PFBASE = %08x\n", readl(PFBASE));
+ s += sprintf(s, "PFCEIL = %08x\n", readl(PFCEIL));
+ s += sprintf(s, "POLLFLAG = %08x\n", readl(POLLFLAG));
+ s += sprintf(s, "SYSRST = %08x\n", readl(SYSRST));
return simple_read_from_buffer(userbuf, count, ppos,
big_buffer, s-big_buffer);
{
char * s = big_buffer;
- s += sprintf(s, "GSCTRL = %08lx\n", GSCTRL);
- s += sprintf(s, "VSCTRL = %08lx\n", VSCTRL);
- s += sprintf(s, "GBBASE = %08lx\n", GBBASE);
- s += sprintf(s, "VBBASE = %08lx\n", VBBASE);
- s += sprintf(s, "GDRCTRL = %08lx\n", GDRCTRL);
- s += sprintf(s, "VCMSK = %08lx\n", VCMSK);
- s += sprintf(s, "GSCADR = %08lx\n", GSCADR);
- s += sprintf(s, "VSCADR = %08lx\n", VSCADR);
- s += sprintf(s, "VUBASE = %08lx\n", VUBASE);
- s += sprintf(s, "VVBASE = %08lx\n", VVBASE);
- s += sprintf(s, "GSADR = %08lx\n", GSADR);
- s += sprintf(s, "VSADR = %08lx\n", VSADR);
- s += sprintf(s, "HCCTRL = %08lx\n", HCCTRL);
- s += sprintf(s, "HCSIZE = %08lx\n", HCSIZE);
- s += sprintf(s, "HCPOS = %08lx\n", HCPOS);
- s += sprintf(s, "HCBADR = %08lx\n", HCBADR);
- s += sprintf(s, "HCCKMSK = %08lx\n", HCCKMSK);
- s += sprintf(s, "GPLUT = %08lx\n", GPLUT);
+ s += sprintf(s, "GSCTRL = %08x\n", readl(GSCTRL));
+ s += sprintf(s, "VSCTRL = %08x\n", readl(VSCTRL));
+ s += sprintf(s, "GBBASE = %08x\n", readl(GBBASE));
+ s += sprintf(s, "VBBASE = %08x\n", readl(VBBASE));
+ s += sprintf(s, "GDRCTRL = %08x\n", readl(GDRCTRL));
+ s += sprintf(s, "VCMSK = %08x\n", readl(VCMSK));
+ s += sprintf(s, "GSCADR = %08x\n", readl(GSCADR));
+ s += sprintf(s, "VSCADR = %08x\n", readl(VSCADR));
+ s += sprintf(s, "VUBASE = %08x\n", readl(VUBASE));
+ s += sprintf(s, "VVBASE = %08x\n", readl(VVBASE));
+ s += sprintf(s, "GSADR = %08x\n", readl(GSADR));
+ s += sprintf(s, "VSADR = %08x\n", readl(VSADR));
+ s += sprintf(s, "HCCTRL = %08x\n", readl(HCCTRL));
+ s += sprintf(s, "HCSIZE = %08x\n", readl(HCSIZE));
+ s += sprintf(s, "HCPOS = %08x\n", readl(HCPOS));
+ s += sprintf(s, "HCBADR = %08x\n", readl(HCBADR));
+ s += sprintf(s, "HCCKMSK = %08x\n", readl(HCCKMSK));
+ s += sprintf(s, "GPLUT = %08x\n", readl(GPLUT));
return simple_read_from_buffer(userbuf, count, ppos,
big_buffer, s-big_buffer);
{
char * s = big_buffer;
- s += sprintf(s, "DSCTRL = %08lx\n", DSCTRL);
- s += sprintf(s, "DHT01 = %08lx\n", DHT01);
- s += sprintf(s, "DHT02 = %08lx\n", DHT02);
- s += sprintf(s, "DHT03 = %08lx\n", DHT03);
- s += sprintf(s, "DVT01 = %08lx\n", DVT01);
- s += sprintf(s, "DVT02 = %08lx\n", DVT02);
- s += sprintf(s, "DVT03 = %08lx\n", DVT03);
- s += sprintf(s, "DBCOL = %08lx\n", DBCOL);
- s += sprintf(s, "BGCOLOR = %08lx\n", BGCOLOR);
- s += sprintf(s, "DINTRS = %08lx\n", DINTRS);
- s += sprintf(s, "DINTRE = %08lx\n", DINTRE);
- s += sprintf(s, "DINTRCNT = %08lx\n", DINTRCNT);
- s += sprintf(s, "DSIG = %08lx\n", DSIG);
- s += sprintf(s, "DMCTRL = %08lx\n", DMCTRL);
- s += sprintf(s, "CLIPCTRL = %08lx\n", CLIPCTRL);
- s += sprintf(s, "SPOCTRL = %08lx\n", SPOCTRL);
- s += sprintf(s, "SVCTRL = %08lx\n", SVCTRL);
- s += sprintf(s, "DLSTS = %08lx\n", DLSTS);
- s += sprintf(s, "DLLCTRL = %08lx\n", DLLCTRL);
- s += sprintf(s, "DVLNUM = %08lx\n", DVLNUM);
- s += sprintf(s, "DUCTRL = %08lx\n", DUCTRL);
- s += sprintf(s, "DVECTRL = %08lx\n", DVECTRL);
- s += sprintf(s, "DHDET = %08lx\n", DHDET);
- s += sprintf(s, "DVDET = %08lx\n", DVDET);
- s += sprintf(s, "DODMSK = %08lx\n", DODMSK);
- s += sprintf(s, "CSC01 = %08lx\n", CSC01);
- s += sprintf(s, "CSC02 = %08lx\n", CSC02);
- s += sprintf(s, "CSC03 = %08lx\n", CSC03);
- s += sprintf(s, "CSC04 = %08lx\n", CSC04);
- s += sprintf(s, "CSC05 = %08lx\n", CSC05);
+ s += sprintf(s, "DSCTRL = %08x\n", readl(DSCTRL));
+ s += sprintf(s, "DHT01 = %08x\n", readl(DHT01));
+ s += sprintf(s, "DHT02 = %08x\n", readl(DHT02));
+ s += sprintf(s, "DHT03 = %08x\n", readl(DHT03));
+ s += sprintf(s, "DVT01 = %08x\n", readl(DVT01));
+ s += sprintf(s, "DVT02 = %08x\n", readl(DVT02));
+ s += sprintf(s, "DVT03 = %08x\n", readl(DVT03));
+ s += sprintf(s, "DBCOL = %08x\n", readl(DBCOL));
+ s += sprintf(s, "BGCOLOR = %08x\n", readl(BGCOLOR));
+ s += sprintf(s, "DINTRS = %08x\n", readl(DINTRS));
+ s += sprintf(s, "DINTRE = %08x\n", readl(DINTRE));
+ s += sprintf(s, "DINTRCNT = %08x\n", readl(DINTRCNT));
+ s += sprintf(s, "DSIG = %08x\n", readl(DSIG));
+ s += sprintf(s, "DMCTRL = %08x\n", readl(DMCTRL));
+ s += sprintf(s, "CLIPCTRL = %08x\n", readl(CLIPCTRL));
+ s += sprintf(s, "SPOCTRL = %08x\n", readl(SPOCTRL));
+ s += sprintf(s, "SVCTRL = %08x\n", readl(SVCTRL));
+ s += sprintf(s, "DLSTS = %08x\n", readl(DLSTS));
+ s += sprintf(s, "DLLCTRL = %08x\n", readl(DLLCTRL));
+ s += sprintf(s, "DVLNUM = %08x\n", readl(DVLNUM));
+ s += sprintf(s, "DUCTRL = %08x\n", readl(DUCTRL));
+ s += sprintf(s, "DVECTRL = %08x\n", readl(DVECTRL));
+ s += sprintf(s, "DHDET = %08x\n", readl(DHDET));
+ s += sprintf(s, "DVDET = %08x\n", readl(DVDET));
+ s += sprintf(s, "DODMSK = %08x\n", readl(DODMSK));
+ s += sprintf(s, "CSC01 = %08x\n", readl(CSC01));
+ s += sprintf(s, "CSC02 = %08x\n", readl(CSC02));
+ s += sprintf(s, "CSC03 = %08x\n", readl(CSC03));
+ s += sprintf(s, "CSC04 = %08x\n", readl(CSC04));
+ s += sprintf(s, "CSC05 = %08x\n", readl(CSC05));
return simple_read_from_buffer(userbuf, count, ppos,
big_buffer, s-big_buffer);
{
char * s = big_buffer;
- s += sprintf(s, "SYSCLKSRC = %08lx\n", SYSCLKSRC);
- s += sprintf(s, "PIXCLKSRC = %08lx\n", PIXCLKSRC);
- s += sprintf(s, "CLKSLEEP = %08lx\n", CLKSLEEP);
- s += sprintf(s, "COREPLL = %08lx\n", COREPLL);
- s += sprintf(s, "DISPPLL = %08lx\n", DISPPLL);
- s += sprintf(s, "PLLSTAT = %08lx\n", PLLSTAT);
- s += sprintf(s, "VOVRCLK = %08lx\n", VOVRCLK);
- s += sprintf(s, "PIXCLK = %08lx\n", PIXCLK);
- s += sprintf(s, "MEMCLK = %08lx\n", MEMCLK);
- s += sprintf(s, "M24CLK = %08lx\n", M24CLK);
- s += sprintf(s, "MBXCLK = %08lx\n", MBXCLK);
- s += sprintf(s, "SDCLK = %08lx\n", SDCLK);
- s += sprintf(s, "PIXCLKDIV = %08lx\n", PIXCLKDIV);
+ s += sprintf(s, "SYSCLKSRC = %08x\n", readl(SYSCLKSRC));
+ s += sprintf(s, "PIXCLKSRC = %08x\n", readl(PIXCLKSRC));
+ s += sprintf(s, "CLKSLEEP = %08x\n", readl(CLKSLEEP));
+ s += sprintf(s, "COREPLL = %08x\n", readl(COREPLL));
+ s += sprintf(s, "DISPPLL = %08x\n", readl(DISPPLL));
+ s += sprintf(s, "PLLSTAT = %08x\n", readl(PLLSTAT));
+ s += sprintf(s, "VOVRCLK = %08x\n", readl(VOVRCLK));
+ s += sprintf(s, "PIXCLK = %08x\n", readl(PIXCLK));
+ s += sprintf(s, "MEMCLK = %08x\n", readl(MEMCLK));
+ s += sprintf(s, "M24CLK = %08x\n", readl(M24CLK));
+ s += sprintf(s, "MBXCLK = %08x\n", readl(MBXCLK));
+ s += sprintf(s, "SDCLK = %08x\n", readl(SDCLK));
+ s += sprintf(s, "PIXCLKDIV = %08x\n", readl(PIXCLKDIV));
return simple_read_from_buffer(userbuf, count, ppos,
big_buffer, s-big_buffer);
}
+static ssize_t sdram_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char * s = big_buffer;
+
+ s += sprintf(s, "LMRST = %08x\n", readl(LMRST));
+ s += sprintf(s, "LMCFG = %08x\n", readl(LMCFG));
+ s += sprintf(s, "LMPWR = %08x\n", readl(LMPWR));
+ s += sprintf(s, "LMPWRSTAT = %08x\n", readl(LMPWRSTAT));
+ s += sprintf(s, "LMCEMR = %08x\n", readl(LMCEMR));
+ s += sprintf(s, "LMTYPE = %08x\n", readl(LMTYPE));
+ s += sprintf(s, "LMTIM = %08x\n", readl(LMTIM));
+ s += sprintf(s, "LMREFRESH = %08x\n", readl(LMREFRESH));
+ s += sprintf(s, "LMPROTMIN = %08x\n", readl(LMPROTMIN));
+ s += sprintf(s, "LMPROTMAX = %08x\n", readl(LMPROTMAX));
+ s += sprintf(s, "LMPROTCFG = %08x\n", readl(LMPROTCFG));
+ s += sprintf(s, "LMPROTERR = %08x\n", readl(LMPROTERR));
+
+ return simple_read_from_buffer(userbuf, count, ppos,
+ big_buffer, s-big_buffer);
+}
+
+static ssize_t misc_read_file(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char * s = big_buffer;
+
+ s += sprintf(s, "LCD_CONFIG = %08x\n", readl(LCD_CONFIG));
+ s += sprintf(s, "ODFBPWR = %08x\n", readl(ODFBPWR));
+ s += sprintf(s, "ODFBSTAT = %08x\n", readl(ODFBSTAT));
+ s += sprintf(s, "ID = %08x\n", readl(ID));
+
+ return simple_read_from_buffer(userbuf, count, ppos,
+ big_buffer, s-big_buffer);
+}
+
+
static struct file_operations sysconf_fops = {
.read = sysconf_read_file,
.write = write_file_dummy,
.open = open_file_generic,
};
+static struct file_operations sdram_fops = {
+ .read = sdram_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
+
+static struct file_operations misc_fops = {
+ .read = misc_read_file,
+ .write = write_file_dummy,
+ .open = open_file_generic,
+};
static void __devinit mbxfb_debugfs_init(struct fb_info *fbi)
{
fbi, &display_fops);
dbg->gsctl = debugfs_create_file("gsctl", 0444, dbg->dir,
fbi, &gsctl_fops);
+ dbg->sdram = debugfs_create_file("sdram", 0444, dbg->dir,
+ fbi, &sdram_fops);
+ dbg->misc = debugfs_create_file("misc", 0444, dbg->dir,
+ fbi, &misc_fops);
}
static void __devexit mbxfb_debugfs_remove(struct fb_info *fbi)
struct mbxfb_info *mfbi = fbi->par;
struct mbxfb_debugfs_data *dbg = mfbi->debugfs_data;
+ debugfs_remove(dbg->misc);
+ debugfs_remove(dbg->sdram);
debugfs_remove(dbg->gsctl);
debugfs_remove(dbg->display);
debugfs_remove(dbg->clock);
/*
* linux/drivers/video/mbx/mbxfb.c
*
+ * Copyright (C) 2006 8D Technologies inc
+ * Raphael Assenat <raph@8d.com>
+ * - Added video overlay support
+ * - Various improvements
+ *
* Copyright (C) 2006 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
+ * - Creation of driver
*
* Based on pxafb.c
*
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/uaccess.h>
#include <asm/io.h>
static unsigned long virt_base_2700;
+#define write_reg(val, reg) do { writel((val), (reg)); } while(0)
+
+/* Without this delay, the graphics appears somehow scaled and
+ * there is a lot of jitter in scanlines. This delay is probably
+ * needed only after setting some specific register(s) somewhere,
+ * not all over the place... */
+#define write_reg_dly(val, reg) do { writel((val), reg); udelay(1000); } while(0)
+
#define MIN_XRES 16
#define MIN_YRES 16
#define MAX_XRES 2048
gsctrl &= ~(FMsk(GSCTRL_GSWIDTH) | FMsk(GSCTRL_GSHEIGHT));
gsctrl |= Gsctrl_Width(info->var.xres) |
Gsctrl_Height(info->var.yres);
- writel(gsctrl, GSCTRL);
- udelay(1000);
+ write_reg_dly(gsctrl, GSCTRL);
gsadr &= ~(FMsk(GSADR_SRCSTRIDE));
gsadr |= Gsadr_Srcstride(info->var.xres * info->var.bits_per_pixel /
(8 * 16) - 1);
- writel(gsadr, GSADR);
- udelay(1000);
+ write_reg_dly(gsadr, GSADR);
/* setup timings */
var->pixclock = mbxfb_get_pixclock(info->var.pixclock, &div);
- writel((Disp_Pll_M(div.m) | Disp_Pll_N(div.n) |
+ write_reg_dly((Disp_Pll_M(div.m) | Disp_Pll_N(div.n) |
Disp_Pll_P(div.p) | DISP_PLL_EN), DISPPLL);
hbps = var->hsync_len;
vfps = vas + var->yres;
vt = vfps + var->lower_margin;
- writel((Dht01_Hbps(hbps) | Dht01_Ht(ht)), DHT01);
- writel((Dht02_Hlbs(has) | Dht02_Has(has)), DHT02);
- writel((Dht03_Hfps(hfps) | Dht03_Hrbs(hfps)), DHT03);
- writel((Dhdet_Hdes(has) | Dhdet_Hdef(hfps)), DHDET);
+ write_reg_dly((Dht01_Hbps(hbps) | Dht01_Ht(ht)), DHT01);
+ write_reg_dly((Dht02_Hlbs(has) | Dht02_Has(has)), DHT02);
+ write_reg_dly((Dht03_Hfps(hfps) | Dht03_Hrbs(hfps)), DHT03);
+ write_reg_dly((Dhdet_Hdes(has) | Dhdet_Hdef(hfps)), DHDET);
- writel((Dvt01_Vbps(vbps) | Dvt01_Vt(vt)), DVT01);
- writel((Dvt02_Vtbs(vas) | Dvt02_Vas(vas)), DVT02);
- writel((Dvt03_Vfps(vfps) | Dvt03_Vbbs(vfps)), DVT03);
- writel((Dvdet_Vdes(vas) | Dvdet_Vdef(vfps)), DVDET);
- writel((Dvectrl_Vevent(vfps) | Dvectrl_Vfetch(vbps)), DVECTRL);
+ write_reg_dly((Dvt01_Vbps(vbps) | Dvt01_Vt(vt)), DVT01);
+ write_reg_dly((Dvt02_Vtbs(vas) | Dvt02_Vas(vas)), DVT02);
+ write_reg_dly((Dvt03_Vfps(vfps) | Dvt03_Vbbs(vfps)), DVT03);
+ write_reg_dly((Dvdet_Vdes(vas) | Dvdet_Vdef(vfps)), DVDET);
+ write_reg_dly((Dvectrl_Vevent(vfps) | Dvectrl_Vfetch(vbps)), DVECTRL);
- writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+
+ write_reg_dly(DINTRE_VEVENT0_EN, DINTRE);
return 0;
}
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_NORMAL:
- writel((readl(DSCTRL) & ~DSCTRL_SYNCGEN_EN), DSCTRL);
- udelay(1000);
- writel((readl(PIXCLK) & ~PIXCLK_EN), PIXCLK);
- udelay(1000);
- writel((readl(VOVRCLK) & ~VOVRCLK_EN), VOVRCLK);
- udelay(1000);
+ write_reg_dly((readl(DSCTRL) & ~DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly((readl(PIXCLK) & ~PIXCLK_EN), PIXCLK);
+ write_reg_dly((readl(VOVRCLK) & ~VOVRCLK_EN), VOVRCLK);
break;
case FB_BLANK_UNBLANK:
- writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
- udelay(1000);
- writel((readl(PIXCLK) | PIXCLK_EN), PIXCLK);
- udelay(1000);
+ write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly((readl(PIXCLK) | PIXCLK_EN), PIXCLK);
break;
}
return 0;
}
+static int mbxfb_setupOverlay(struct mbxfb_overlaySetup *set)
+{
+ u32 vsctrl, vbbase, vscadr, vsadr;
+ u32 sssize, spoctrl, svctrl, shctrl;
+ u32 vubase, vvbase;
+ u32 vovrclk;
+
+ if (set->scaled_width==0 || set->scaled_height==0)
+ return -EINVAL;
+
+ /* read registers which have reserved bits
+ * so we can write them back as-is. */
+ vovrclk = readl(VOVRCLK);
+ vsctrl = readl(VSCTRL);
+ vscadr = readl(VSCADR);
+ vubase = readl(VUBASE);
+ vvbase = readl(VVBASE);
+
+ spoctrl = readl(SPOCTRL);
+ sssize = readl(SSSIZE);
+
+
+ vbbase = Vbbase_Glalpha(set->alpha);
+
+ vsctrl &= ~( FMsk(VSCTRL_VSWIDTH) |
+ FMsk(VSCTRL_VSHEIGHT) |
+ FMsk(VSCTRL_VPIXFMT) |
+ VSCTRL_GAMMA_EN | VSCTRL_CSC_EN |
+ VSCTRL_COSITED );
+ vsctrl |= Vsctrl_Width(set->width) | Vsctrl_Height(set->height) |
+ VSCTRL_CSC_EN;
+
+ vscadr &= ~(VSCADR_STR_EN | VSCADR_COLKEY_EN | VSCADR_COLKEYSRC |
+ FMsk(VSCADR_BLEND_M) | FMsk(VSCADR_BLEND_POS) |
+ FMsk(VSCADR_VBASE_ADR) );
+ vubase &= ~(VUBASE_UVHALFSTR | FMsk(VUBASE_UBASE_ADR));
+ vvbase &= ~(FMsk(VVBASE_VBASE_ADR));
+
+ switch (set->fmt)
+ {
+ case MBXFB_FMT_YUV12:
+ vsctrl |= VSCTRL_VPIXFMT_YUV12;
+
+ set->Y_stride = ((set->width) + 0xf ) & ~0xf;
+
+ break;
+ case MBXFB_FMT_UY0VY1:
+ vsctrl |= VSCTRL_VPIXFMT_UY0VY1;
+ set->Y_stride = (set->width*2 + 0xf ) & ~0xf;
+ break;
+ case MBXFB_FMT_VY0UY1:
+ vsctrl |= VSCTRL_VPIXFMT_VY0UY1;
+ set->Y_stride = (set->width*2 + 0xf ) & ~0xf;
+ break;
+ case MBXFB_FMT_Y0UY1V:
+ vsctrl |= VSCTRL_VPIXFMT_Y0UY1V;
+ set->Y_stride = (set->width*2 + 0xf ) & ~0xf;
+ break;
+ case MBXFB_FMT_Y0VY1U:
+ vsctrl |= VSCTRL_VPIXFMT_Y0VY1U;
+ set->Y_stride = (set->width*2 + 0xf ) & ~0xf;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* VSCTRL has the bits which sets the Video Pixel Format.
+ * When passing from a packed to planar format,
+ * if we write VSCTRL first, VVBASE and VUBASE would
+ * be zero if we would not set them here. (And then,
+ * the chips hangs and only a reset seems to fix it).
+ *
+ * If course, the values calculated here have no meaning
+ * for packed formats.
+ */
+ set->UV_stride = ((set->width/2) + 0x7 ) & ~0x7;
+ set->U_offset = set->height * set->Y_stride;
+ set->V_offset = set->U_offset +
+ set->height * set->UV_stride;
+ vubase |= Vubase_Ubase_Adr(
+ (0x60000 + set->mem_offset + set->U_offset)>>3);
+ vvbase |= Vvbase_Vbase_Adr(
+ (0x60000 + set->mem_offset + set->V_offset)>>3);
+
+
+ vscadr |= VSCADR_BLEND_VID | VSCADR_BLEND_GLOB |
+ Vscadr_Vbase_Adr((0x60000 + set->mem_offset)>>4);
+
+ if (set->enable)
+ vscadr |= VSCADR_STR_EN;
+
+
+ vsadr = Vsadr_Srcstride((set->Y_stride)/16-1) |
+ Vsadr_Xstart(set->x) | Vsadr_Ystart(set->y);
+
+ sssize &= ~(FMsk(SSSIZE_SC_WIDTH) | FMsk(SSSIZE_SC_HEIGHT));
+ sssize = Sssize_Sc_Width(set->scaled_width-1) |
+ Sssize_Sc_Height(set->scaled_height-1);
+
+ spoctrl &= ~(SPOCTRL_H_SC_BP | SPOCTRL_V_SC_BP |
+ SPOCTRL_HV_SC_OR | SPOCTRL_VS_UR_C |
+ FMsk(SPOCTRL_VORDER) | FMsk(SPOCTRL_VPITCH));
+ spoctrl = Spoctrl_Vpitch((set->height<<11)/set->scaled_height)
+ | SPOCTRL_VORDER_2TAP;
+
+ /* Bypass horiz/vert scaler when same size */
+ if (set->scaled_width == set->width)
+ spoctrl |= SPOCTRL_H_SC_BP;
+ if (set->scaled_height == set->height)
+ spoctrl |= SPOCTRL_V_SC_BP;
+
+ svctrl = Svctrl_Initial1(1<<10) | Svctrl_Initial2(1<<10);
+
+ shctrl = Shctrl_Hinitial(4<<11)
+ | Shctrl_Hpitch((set->width<<11)/set->scaled_width);
+
+ /* Video plane registers */
+ write_reg(vsctrl, VSCTRL);
+ write_reg(vbbase, VBBASE);
+ write_reg(vscadr, VSCADR);
+ write_reg(vubase, VUBASE);
+ write_reg(vvbase, VVBASE);
+ write_reg(vsadr, VSADR);
+
+ /* Video scaler registers */
+ write_reg(sssize, SSSIZE);
+ write_reg(spoctrl, SPOCTRL);
+ write_reg(svctrl, SVCTRL);
+ write_reg(shctrl, SHCTRL);
+
+ /* RAPH: Using those coefficients, the scaled
+ * image is quite blurry. I dont know how
+ * to improve them ; The chip documentation
+ * was not helpful.. */
+ write_reg(0x21212121, VSCOEFF0);
+ write_reg(0x21212121, VSCOEFF1);
+ write_reg(0x21212121, VSCOEFF2);
+ write_reg(0x21212121, VSCOEFF3);
+ write_reg(0x21212121, VSCOEFF4);
+ write_reg(0x00000000, HSCOEFF0);
+ write_reg(0x00000000, HSCOEFF1);
+ write_reg(0x00000000, HSCOEFF2);
+ write_reg(0x03020201, HSCOEFF3);
+ write_reg(0x09070604, HSCOEFF4);
+ write_reg(0x0f0e0c0a, HSCOEFF5);
+ write_reg(0x15141211, HSCOEFF6);
+ write_reg(0x19181716, HSCOEFF7);
+ write_reg(0x00000019, HSCOEFF8);
+
+ /* Clock */
+ if (set->enable)
+ vovrclk |= 1;
+ else
+ vovrclk &= ~1;
+
+ write_reg(vovrclk, VOVRCLK);
+
+ return 0;
+}
+
+static int mbxfb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct mbxfb_overlaySetup setup;
+ int res;
+
+ if (cmd == MBXFB_IOCX_OVERLAY)
+ {
+ if (copy_from_user(&setup, (void __user*)arg,
+ sizeof(struct mbxfb_overlaySetup)))
+ return -EFAULT;
+
+ res = mbxfb_setupOverlay(&setup);
+ if (res)
+ return res;
+
+ if (copy_to_user((void __user*)arg, &setup,
+ sizeof(struct mbxfb_overlaySetup)))
+ return -EFAULT;
+
+ return 0;
+ }
+ return -EINVAL;
+}
+
static struct fb_ops mbxfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = mbxfb_check_var,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_blank = mbxfb_blank,
+ .fb_ioctl = mbxfb_ioctl,
};
/*
*/
static void __devinit setup_memc(struct fb_info *fbi)
{
- struct mbxfb_info *mfbi = fbi->par;
unsigned long tmp;
int i;
/* FIXME: use platfrom specific parameters */
/* setup SDRAM controller */
- writel((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
+ write_reg_dly((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
LMCFG_LMA_TS),
LMCFG);
- udelay(1000);
- writel(LMPWR_MC_PWR_ACT, LMPWR);
- udelay(1000);
+ write_reg_dly(LMPWR_MC_PWR_ACT, LMPWR);
/* setup SDRAM timings */
- writel((Lmtim_Tras(7) | Lmtim_Trp(3) | Lmtim_Trcd(3) |
+ write_reg_dly((Lmtim_Tras(7) | Lmtim_Trp(3) | Lmtim_Trcd(3) |
Lmtim_Trc(9) | Lmtim_Tdpl(2)),
LMTIM);
- udelay(1000);
/* setup SDRAM refresh rate */
- writel(0xc2b, LMREFRESH);
- udelay(1000);
+ write_reg_dly(0xc2b, LMREFRESH);
/* setup SDRAM type parameters */
- writel((LMTYPE_CASLAT_3 | LMTYPE_BKSZ_2 | LMTYPE_ROWSZ_11 |
+ write_reg_dly((LMTYPE_CASLAT_3 | LMTYPE_BKSZ_2 | LMTYPE_ROWSZ_11 |
LMTYPE_COLSZ_8),
LMTYPE);
- udelay(1000);
/* enable memory controller */
- writel(LMPWR_MC_PWR_ACT, LMPWR);
- udelay(1000);
+ write_reg_dly(LMPWR_MC_PWR_ACT, LMPWR);
/* perform dummy reads */
for ( i = 0; i < 16; i++ ) {
static void enable_clocks(struct fb_info *fbi)
{
/* enable clocks */
- writel(SYSCLKSRC_PLL_2, SYSCLKSRC);
- udelay(1000);
- writel(PIXCLKSRC_PLL_1, PIXCLKSRC);
- udelay(1000);
- writel(0x00000000, CLKSLEEP);
- udelay(1000);
- writel((Core_Pll_M(0x17) | Core_Pll_N(0x3) | Core_Pll_P(0x0) |
+ write_reg_dly(SYSCLKSRC_PLL_2, SYSCLKSRC);
+ write_reg_dly(PIXCLKSRC_PLL_1, PIXCLKSRC);
+ write_reg_dly(0x00000000, CLKSLEEP);
+
+ /* PLL output = (Frefclk * M) / (N * 2^P )
+ *
+ * M: 0x17, N: 0x3, P: 0x0 == 100 Mhz!
+ * M: 0xb, N: 0x1, P: 0x1 == 71 Mhz
+ * */
+ write_reg_dly((Core_Pll_M(0xb) | Core_Pll_N(0x1) | Core_Pll_P(0x1) |
CORE_PLL_EN),
COREPLL);
- udelay(1000);
- writel((Disp_Pll_M(0x1b) | Disp_Pll_N(0x7) | Disp_Pll_P(0x1) |
+
+ write_reg_dly((Disp_Pll_M(0x1b) | Disp_Pll_N(0x7) | Disp_Pll_P(0x1) |
DISP_PLL_EN),
DISPPLL);
- writel(0x00000000, VOVRCLK);
- udelay(1000);
- writel(PIXCLK_EN, PIXCLK);
- udelay(1000);
- writel(MEMCLK_EN, MEMCLK);
- udelay(1000);
- writel(0x00000006, M24CLK);
- udelay(1000);
- writel(0x00000006, MBXCLK);
- udelay(1000);
- writel(SDCLK_EN, SDCLK);
- udelay(1000);
- writel(0x00000001, PIXCLKDIV);
- udelay(1000);
+ write_reg_dly(0x00000000, VOVRCLK);
+ write_reg_dly(PIXCLK_EN, PIXCLK);
+ write_reg_dly(MEMCLK_EN, MEMCLK);
+ write_reg_dly(0x00000006, M24CLK);
+ write_reg_dly(0x00000006, MBXCLK);
+ write_reg_dly(SDCLK_EN, SDCLK);
+ write_reg_dly(0x00000001, PIXCLKDIV);
}
static void __devinit setup_graphics(struct fb_info *fbi)
break;
}
- writel(gsctrl, GSCTRL);
- udelay(1000);
- writel(0x00000000, GBBASE);
- udelay(1000);
- writel(0x00ffffff, GDRCTRL);
- udelay(1000);
- writel((GSCADR_STR_EN | Gscadr_Gbase_Adr(0x6000)), GSCADR);
- udelay(1000);
- writel(0x00000000, GPLUT);
- udelay(1000);
+ write_reg_dly(gsctrl, GSCTRL);
+ write_reg_dly(0x00000000, GBBASE);
+ write_reg_dly(0x00ffffff, GDRCTRL);
+ write_reg_dly((GSCADR_STR_EN | Gscadr_Gbase_Adr(0x6000)), GSCADR);
+ write_reg_dly(0x00000000, GPLUT);
}
static void __devinit setup_display(struct fb_info *fbi)
dsctrl |= DSCTRL_HS_POL;
if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
dsctrl |= DSCTRL_VS_POL;
- writel(dsctrl, DSCTRL);
- udelay(1000);
- writel(0xd0303010, DMCTRL);
- udelay(1000);
- writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly(dsctrl, DSCTRL);
+ write_reg_dly(0xd0303010, DMCTRL);
+ write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
}
static void __devinit enable_controller(struct fb_info *fbi)
{
- writel(SYSRST_RST, SYSRST);
- udelay(1000);
+ write_reg_dly(SYSRST_RST, SYSRST);
enable_clocks(fbi);
static int mbxfb_suspend(struct platform_device *dev, pm_message_t state)
{
/* make frame buffer memory enter self-refresh mode */
- writel(LMPWR_MC_PWR_SRM, LMPWR);
+ write_reg_dly(LMPWR_MC_PWR_SRM, LMPWR);
while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM)
; /* empty statement */
/* reset the device, since it's initial state is 'mostly sleeping' */
- writel(SYSRST_RST, SYSRST);
+ write_reg_dly(SYSRST_RST, SYSRST);
return 0;
}
/* setup_graphics(fbi); */
/* setup_display(fbi); */
- writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+ write_reg_dly((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
return 0;
}
#else
dev_dbg(dev, "mbxfb_probe\n");
+ pdata = dev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&dev->dev, "platform data is required\n");
+ return -EINVAL;
+ }
+
fbi = framebuffer_alloc(sizeof(struct mbxfb_info), &dev->dev);
if (fbi == NULL) {
dev_err(&dev->dev, "framebuffer_alloc failed\n");
mfbi = fbi->par;
fbi->pseudo_palette = mfbi->pseudo_palette;
- pdata = dev->dev.platform_data;
+
+
if (pdata->probe)
mfbi->platform_probe = pdata->probe;
if (pdata->remove)
goto err4;
}
- /* FIXME: get from platform */
fbi->screen_base = (char __iomem *)(mfbi->fb_virt_addr + 0x60000);
- fbi->screen_size = 8 * 1024 * 1024; /* 8 Megs */
+ fbi->screen_size = pdata->memsize;
fbi->fbops = &mbxfb_ops;
fbi->var = mbxfb_default;
fbi->fix = mbxfb_fix;
fbi->fix.smem_start = mfbi->fb_phys_addr + 0x60000;
- fbi->fix.smem_len = 8 * 1024 * 1024;
- fbi->fix.line_length = 640 * 2;
+ fbi->fix.smem_len = pdata->memsize;
+ fbi->fix.line_length = mbxfb_default.xres_virtual *
+ mbxfb_default.bits_per_pixel / 8;
ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
if (ret < 0) {
{
struct fb_info *fbi = platform_get_drvdata(dev);
- writel(SYSRST_RST, SYSRST);
- udelay(1000);
+ write_reg_dly(SYSRST_RST, SYSRST);
mbxfb_debugfs_remove(fbi);
#define GPLUT_LUTDATA Fld(24,0)
#define Gplut_Lutdata(x) ((x) << FShft(GPLUT_LUTDATA))
+/* VSCTRL - Video Surface Control Register */
+#define VSCTRL_VPIXFMT Fld(4,27)
+#define VSCTRL_VPIXFMT_YUV12 ((0x9) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_VPIXFMT_UY0VY1 ((0xc) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_VPIXFMT_VY0UY1 ((0xd) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_VPIXFMT_Y0UY1V ((0xe) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_VPIXFMT_Y0VY1U ((0xf) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_GAMMA_EN (1 << 26)
+#define VSCTRL_CSC_EN (1 << 25)
+#define VSCTRL_COSITED (1 << 22)
+#define VSCTRL_VSWIDTH Fld(11,11)
+#define Vsctrl_Width(Pixels) /* Video Width [1-2048] */ \
+ (((Pixels) - 1) << FShft(VSCTRL_VSWIDTH))
+#define VSCTRL_VSHEIGHT Fld(11,0)
+#define Vsctrl_Height(Pixels) /* Video Height [1-2048] */ \
+ (((Pixels) - 1) << FShft(VSCTRL_VSHEIGHT))
+
+/* VBBASE - Video Blending Base Register */
+#define VBBASE_GLALPHA Fld(8,24)
+#define Vbbase_Glalpha(x) ((x) << FShft(VBBASE_GLALPHA))
+
+#define VBBASE_COLKEY Fld(24,0)
+#define Vbbase_Colkey(x) ((x) << FShft(VBBASE_COLKEY))
+
+/* VCMSK - Video Color Key Mask Register */
+#define VCMSK_COLKEY_M Fld(24,0)
+#define Vcmsk_colkey_m(x) ((x) << FShft(VCMSK_COLKEY_M))
+
+/* VSCADR - Video Stream Control Rddress Register */
+#define VSCADR_STR_EN (1 << 31)
+#define VSCADR_COLKEY_EN (1 << 30)
+#define VSCADR_COLKEYSRC (1 << 29)
+#define VSCADR_BLEND_M Fld(2,27)
+#define VSCADR_BLEND_NONE ((0x0) << FShft(VSCADR_BLEND_M))
+#define VSCADR_BLEND_INV ((0x1) << FShft(VSCADR_BLEND_M))
+#define VSCADR_BLEND_GLOB ((0x2) << FShft(VSCADR_BLEND_M))
+#define VSCADR_BLEND_PIX ((0x3) << FShft(VSCADR_BLEND_M))
+#define VSCADR_BLEND_POS Fld(2,24)
+#define VSCADR_BLEND_GFX ((0x0) << FShft(VSCADR_BLEND_POS))
+#define VSCADR_BLEND_VID ((0x1) << FShft(VSCADR_BLEND_POS))
+#define VSCADR_BLEND_CUR ((0x2) << FShft(VSCADR_BLEND_POS))
+#define VSCADR_VBASE_ADR Fld(23,0)
+#define Vscadr_Vbase_Adr(x) ((x) << FShft(VSCADR_VBASE_ADR))
+
+/* VUBASE - Video U Base Register */
+#define VUBASE_UVHALFSTR (1 << 31)
+#define VUBASE_UBASE_ADR Fld(24,0)
+#define Vubase_Ubase_Adr(x) ((x) << FShft(VUBASE_UBASE_ADR))
+
+/* VVBASE - Video V Base Register */
+#define VVBASE_VBASE_ADR Fld(24,0)
+#define Vvbase_Vbase_Adr(x) ((x) << FShft(VVBASE_VBASE_ADR))
+
+/* VSADR - Video Stride Address Register */
+#define VSADR_SRCSTRIDE Fld(10,22)
+#define Vsadr_Srcstride(x) ((x) << FShft(VSADR_SRCSTRIDE))
+#define VSADR_XSTART Fld(11,11)
+#define Vsadr_Xstart(x) ((x) << FShft(VSADR_XSTART))
+#define VSADR_YSTART Fld(11,0)
+#define Vsadr_Ystart(x) ((x) << FShft(VSADR_YSTART))
+
/* HCCTRL - Hardware Cursor Register fields */
#define HCCTRL_CUR_EN (1 << 31)
#define HCCTRL_COLKEY_EN (1 << 29)
#define DMCTRL_BURSTLEN Fld(6,0)
#define Dmctrl_Burstlen(x) ((x) << FShft(DMCTRL_BURSTLEN))
+/* DINTRS - Display Interrupt Status Register */
+#define DINTRS_CUR_OR_S (1 << 18)
+#define DINTRS_STR2_OR_S (1 << 17)
+#define DINTRS_STR1_OR_S (1 << 16)
+#define DINTRS_CUR_UR_S (1 << 6)
+#define DINTRS_STR2_UR_S (1 << 5)
+#define DINTRS_STR1_UR_S (1 << 4)
+#define DINTRS_VEVENT1_S (1 << 3)
+#define DINTRS_VEVENT0_S (1 << 2)
+#define DINTRS_HBLNK1_S (1 << 1)
+#define DINTRS_HBLNK0_S (1 << 0)
+
+/* DINTRE - Display Interrupt Enable Register */
+#define DINTRE_CUR_OR_EN (1 << 18)
+#define DINTRE_STR2_OR_EN (1 << 17)
+#define DINTRE_STR1_OR_EN (1 << 16)
+#define DINTRE_CUR_UR_EN (1 << 6)
+#define DINTRE_STR2_UR_EN (1 << 5)
+#define DINTRE_STR1_UR_EN (1 << 4)
+#define DINTRE_VEVENT1_EN (1 << 3)
+#define DINTRE_VEVENT0_EN (1 << 2)
+#define DINTRE_HBLNK1_EN (1 << 1)
+#define DINTRE_HBLNK0_EN (1 << 0)
+
/* DLSTS - display load status register */
#define DLSTS_RLD_ADONE (1 << 23)
#define DLLCTRL_RLD_ADRLN Fld(8,24)
#define Dllctrl_Rld_Adrln(x) ((x) << FShft(DLLCTRL_RLD_ADRLN))
+/* CLIPCTRL - Clipping Control Register */
+#define CLIPCTRL_HSKIP Fld(11,16)
+#define Clipctrl_Hskip ((x) << FShft(CLIPCTRL_HSKIP))
+#define CLIPCTRL_VSKIP Fld(11,0)
+#define Clipctrl_Vskip ((x) << FShft(CLIPCTRL_VSKIP))
+
/* SPOCTRL - Scale Pitch/Order Control Register */
#define SPOCTRL_H_SC_BP (1 << 31)
#define SPOCTRL_V_SC_BP (1 << 30)
#define SPOCTRL_HV_SC_OR (1 << 29)
#define SPOCTRL_VS_UR_C (1 << 27)
-#define SPOCTRL_VORDER Fld(2,16)
+#define SPOCTRL_VORDER Fld(2,16)
#define SPOCTRL_VORDER_1TAP ((0x0) << FShft(SPOCTRL_VORDER))
#define SPOCTRL_VORDER_2TAP ((0x1) << FShft(SPOCTRL_VORDER))
#define SPOCTRL_VORDER_4TAP ((0x3) << FShft(SPOCTRL_VORDER))
-#define SPOCTRL_VPITCH Fld(16,0)
+#define SPOCTRL_VPITCH Fld(16,0)
#define Spoctrl_Vpitch(x) ((x) << FShft(SPOCTRL_VPITCH))
+/* SVCTRL - Scale Vertical Control Register */
+#define SVCTRL_INITIAL1 Fld(16,16)
+#define Svctrl_Initial1(x) ((x) << FShft(SVCTRL_INITIAL1))
+#define SVCTRL_INITIAL2 Fld(16,0)
+#define Svctrl_Initial2(x) ((x) << FShft(SVCTRL_INITIAL2))
+
+/* SHCTRL - Scale Horizontal Control Register */
+#define SHCTRL_HINITIAL Fld(16,16)
+#define Shctrl_Hinitial(x) ((x) << FShft(SHCTRL_HINITIAL))
+#define SHCTRL_HDECIM (1 << 15)
+#define SHCTRL_HPITCH Fld(15,0)
+#define Shctrl_Hpitch(x) ((x) << FShft(SHCTRL_HPITCH))
+
+/* SSSIZE - Scale Surface Size Register */
+#define SSSIZE_SC_WIDTH Fld(11,16)
+#define Sssize_Sc_Width(x) ((x) << FShft(SSSIZE_SC_WIDTH))
+#define SSSIZE_SC_HEIGHT Fld(11,0)
+#define Sssize_Sc_Height(x) ((x) << FShft(SSSIZE_SC_HEIGHT))
+
#endif /* __REG_BITS_2700G_ */
#define HSCOEFF0 __REG_2700G(0x000021b4)
#define HSCOEFF1 __REG_2700G(0x000021b8)
#define HSCOEFF2 __REG_2700G(0x000021bc)
-#define HSCOEFF3 __REG_2700G(0x000021b0)
+#define HSCOEFF3 __REG_2700G(0x000021c0)
#define HSCOEFF4 __REG_2700G(0x000021c4)
#define HSCOEFF5 __REG_2700G(0x000021c8)
#define HSCOEFF6 __REG_2700G(0x000021cc)
* Standard video mode definitions (taken from XFree86)
*/
-#define DEFAULT_MODEDB_INDEX 0
-
static const struct fb_videomode modedb[] = {
{
/* 640x400 @ 70 Hz, 31.5 kHz hsync */
db = modedb;
dbsize = ARRAY_SIZE(modedb);
}
+
if (!default_mode)
- default_mode = &modedb[DEFAULT_MODEDB_INDEX];
+ default_mode = &db[0];
+
if (!default_bpp)
default_bpp = 8;
printk(KERN_DEBUG "--- Neo extended register dump ---\n");
for (int w = 0; w < 0x85; w++)
printk(KERN_DEBUG "CR %p: %p\n", (void *) w,
- (void *) vga_rcrt(NULL, w);
+ (void *) vga_rcrt(NULL, w));
for (int w = 0; w < 0xC7; w++)
printk(KERN_DEBUG "GR %p: %p\n", (void *) w,
(void *) vga_rgfx(NULL, w));
NVDmaKickoff(par);
}
-u8 byte_rev[256] = {
- 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
- 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
- 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
- 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
- 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
- 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
- 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
- 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
- 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
- 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
- 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
- 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
- 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
- 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
- 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
- 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
- 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
- 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
- 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
- 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
- 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
- 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
- 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
- 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
- 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
- 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
- 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
- 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
- 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
- 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
- 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
- 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
-};
-
int nvidiafb_sync(struct fb_info *info)
{
struct nvidia_par *par = info->par;
snprintf(name, sizeof(name), "nvidiabl%d", info->node);
- bd = backlight_device_register(name, par, &nvidia_bl_data);
+ bd = backlight_device_register(name, info->dev, par, &nvidia_bl_data);
if (IS_ERR(bd)) {
info->bl_dev = NULL;
printk(KERN_WARNING "nvidia: Backlight registration failed\n");
void nvidia_delete_i2c_busses(struct nvidia_par *par)
{
if (par->chan[0].par)
- i2c_bit_del_bus(&par->chan[0].adapter);
+ i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
- i2c_bit_del_bus(&par->chan[1].adapter);
+ i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
- i2c_bit_del_bus(&par->chan[2].adapter);
+ i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
/* try to get from firmware */
const u8 *e = fb_firmware_edid(info->device);
- if (e != NULL) {
- edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
- if (edid)
- memcpy(edid, e, EDID_LENGTH);
- }
+ if (e != NULL)
+ edid = kmemdup(e, EDID_LENGTH, GFP_KERNEL);
}
*out_edid = edid;
#define READ_GET(par) (NV_RD32(&(par)->FIFO[0x0011], 0) >> 2)
#ifdef __LITTLE_ENDIAN
+
+#include <linux/bitrev.h>
+
#define reverse_order(l) \
do { \
u8 *a = (u8 *)(l); \
- *a = byte_rev[*a], a++; \
- *a = byte_rev[*a], a++; \
- *a = byte_rev[*a], a++; \
- *a = byte_rev[*a]; \
+ a[0] = bitrev8(a[0]); \
+ a[1] = bitrev8(a[1]); \
+ a[2] = bitrev8(a[2]); \
+ a[3] = bitrev8(a[3]); \
} while(0)
#else
#define reverse_order(l) do { } while(0)
}
}
if (pedid) {
- *out_edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ *out_edid = kmemdup(pedid, EDID_LENGTH, GFP_KERNEL);
if (*out_edid == NULL)
return -1;
- memcpy(*out_edid, pedid, EDID_LENGTH);
printk(KERN_DEBUG "nvidiafb: Found OF EDID for head %d\n", conn);
return 0;
}
extern void nvidiafb_imageblit(struct fb_info *info,
const struct fb_image *image);
extern int nvidiafb_sync(struct fb_info *info);
-extern u8 byte_rev[256];
/* in nv_backlight.h */
#ifdef CONFIG_FB_NVIDIA_BACKLIGHT
fb_alloc_cmap(&info->cmap, 256, 0);
if (register_framebuffer(info) < 0) {
+ iounmap(par->cmap_adr);
+ par->cmap_adr = NULL;
+ iounmap(info->screen_base);
kfree(info);
release_mem_region(res_start, res_size);
return;
rc = platinum_init_fb(info);
if (rc != 0) {
+ iounmap(pinfo->frame_buffer);
+ iounmap(pinfo->platinum_regs);
+ iounmap(pinfo->cmap_regs);
dev_set_drvdata(&odev->dev, NULL);
framebuffer_release(info);
}
static void __init pmagbbfb_osc_setup(struct fb_info *info)
{
static unsigned int pmagbbfb_freqs[] __initdata = {
- 130808, 119843, 104000, 92980, 74367, 72800,
+ 130808, 119843, 104000, 92980, 74370, 72800,
69197, 66000, 65000, 50350, 36000, 32000, 25175
};
struct pmagbbfb_par *par = info->par;
static void pvr2fb_dc_exit(void)
{
+ if (fb_info->screen_base) {
+ iounmap(fb_info->screen_base);
+ fb_info->screen_base = NULL;
+ }
+ if (currentpar->mmio_base) {
+ iounmap((void *)currentpar->mmio_base);
+ currentpar->mmio_base = 0;
+ }
+
free_irq(HW_EVENT_VSYNC, 0);
#ifdef CONFIG_SH_DMA
free_dma(pvr2dma);
static void __devexit pvr2fb_pci_remove(struct pci_dev *pdev)
{
+ if (fb_info->screen_base) {
+ iounmap(fb_info->screen_base);
+ fb_info->screen_base = NULL;
+ }
+ if (currentpar->mmio_base) {
+ iounmap((void *)currentpar->mmio_base);
+ currentpar->mmio_base = 0;
+ }
+
pci_release_regions(pdev);
}
do_install_cmap(0, fb_info);
- if (register_framebuffer(fb_info) < 0)
+ if (register_framebuffer(fb_info) < 0) {
+ iounmap(zinfo->base);
return -EINVAL;
+ }
printk(KERN_INFO "fb%d: %s frame buffer device, using %ldK of "
"video memory\n", fb_info->node,
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/backlight.h>
+#include <linux/bitrev.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
snprintf(name, sizeof(name), "rivabl%d", info->node);
- bd = backlight_device_register(name, par, &riva_bl_data);
+ bd = backlight_device_register(name, info->dev, par, &riva_bl_data);
if (IS_ERR(bd)) {
info->bl_dev = NULL;
printk(KERN_WARNING "riva: Backlight registration failed\n");
return (VGA_RD08(par->riva.PVIO, 0x3cc));
}
-static u8 byte_rev[256] = {
- 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
- 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
- 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
- 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
- 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
- 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
- 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
- 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
- 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
- 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
- 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
- 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
- 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
- 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
- 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
- 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
- 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
- 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
- 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
- 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
- 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
- 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
- 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
- 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
- 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
- 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
- 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
- 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
- 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
- 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
- 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
- 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
-};
-
static inline void reverse_order(u32 *l)
{
u8 *a = (u8 *)l;
- *a = byte_rev[*a], a++;
- *a = byte_rev[*a], a++;
- *a = byte_rev[*a], a++;
- *a = byte_rev[*a];
+ a[0] = bitrev8(a[0]);
+ a[1] = bitrev8(a[1]);
+ a[2] = bitrev8(a[2]);
+ a[3] = bitrev8(a[3]);
}
/* ------------------------------------------------------------------------- *
* CALLED FROM:
* rivafb_set_par()
*/
-static void riva_load_video_mode(struct fb_info *info)
+static int riva_load_video_mode(struct fb_info *info)
{
int bpp, width, hDisplaySize, hDisplay, hStart,
hEnd, hTotal, height, vDisplay, vStart, vEnd, vTotal, dotClock;
int hBlankStart, hBlankEnd, vBlankStart, vBlankEnd;
+ int rc;
struct riva_par *par = info->par;
struct riva_regs newmode;
else
newmode.misc_output |= 0x80;
- par->riva.CalcStateExt(&par->riva, &newmode.ext, bpp, width,
- hDisplaySize, height, dotClock);
+ rc = CalcStateExt(&par->riva, &newmode.ext, bpp, width,
+ hDisplaySize, height, dotClock);
+ if (rc)
+ goto out;
newmode.ext.scale = NV_RD32(par->riva.PRAMDAC, 0x00000848) &
0xfff000ff;
par->current_state = newmode;
riva_load_state(par, &par->current_state);
par->riva.LockUnlock(&par->riva, 0); /* important for HW cursor */
+
+out:
rivafb_blank(FB_BLANK_UNBLANK, info);
NVTRACE_LEAVE();
+
+ return rc;
}
static void riva_update_var(struct fb_var_screeninfo *var, struct fb_videomode *modedb)
static int rivafb_set_par(struct fb_info *info)
{
struct riva_par *par = info->par;
+ int rc = 0;
NVTRACE_ENTER();
/* vgaHWunlock() + riva unlock (0x7F) */
CRTCout(par, 0x11, 0xFF);
par->riva.LockUnlock(&par->riva, 0);
- riva_load_video_mode(info);
+ rc = riva_load_video_mode(info);
+ if (rc)
+ goto out;
if(!(info->flags & FBINFO_HWACCEL_DISABLED))
riva_setup_accel(info);
info->pixmap.scan_align = 1;
else
info->pixmap.scan_align = 4;
+
+out:
NVTRACE_LEAVE();
- return 0;
+ return rc;
}
/**
* Calculate extended mode parameters (SVGA) and save in a
* mode state structure.
*/
-static void CalcStateExt
+int CalcStateExt
(
RIVA_HW_INST *chip,
RIVA_HW_STATE *state,
* Extended RIVA registers.
*/
pixelDepth = (bpp + 1)/8;
- CalcVClock(dotClock, &VClk, &m, &n, &p, chip);
+ if (!CalcVClock(dotClock, &VClk, &m, &n, &p, chip))
+ return -EINVAL;
switch (chip->Architecture)
{
state->pitch1 =
state->pitch2 =
state->pitch3 = pixelDepth * width;
+
+ return 0;
}
/*
* Load fixed function state and pre-calculated/stored state.
*/
chip->Busy = nv3Busy;
chip->ShowHideCursor = ShowHideCursor;
- chip->CalcStateExt = CalcStateExt;
chip->LoadStateExt = LoadStateExt;
chip->UnloadStateExt = UnloadStateExt;
chip->SetStartAddress = SetStartAddress3;
*/
chip->Busy = nv4Busy;
chip->ShowHideCursor = ShowHideCursor;
- chip->CalcStateExt = CalcStateExt;
chip->LoadStateExt = LoadStateExt;
chip->UnloadStateExt = UnloadStateExt;
chip->SetStartAddress = SetStartAddress;
*/
chip->Busy = nv10Busy;
chip->ShowHideCursor = ShowHideCursor;
- chip->CalcStateExt = CalcStateExt;
chip->LoadStateExt = LoadStateExt;
chip->UnloadStateExt = UnloadStateExt;
chip->SetStartAddress = SetStartAddress;
* Common chip functions.
*/
int (*Busy)(struct _riva_hw_inst *);
- void (*CalcStateExt)(struct _riva_hw_inst *,struct _riva_hw_state *,int,int,int,int,int);
void (*LoadStateExt)(struct _riva_hw_inst *,struct _riva_hw_state *);
void (*UnloadStateExt)(struct _riva_hw_inst *,struct _riva_hw_state *);
void (*SetStartAddress)(struct _riva_hw_inst *,U032);
U032 pitch2;
U032 pitch3;
} RIVA_HW_STATE;
+
+/*
+ * function prototypes
+ */
+
+extern int CalcStateExt
+(
+ RIVA_HW_INST *chip,
+ RIVA_HW_STATE *state,
+ int bpp,
+ int width,
+ int hDisplaySize,
+ int height,
+ int dotClock
+);
+
/*
* External routines.
*/
void riva_delete_i2c_busses(struct riva_par *par)
{
if (par->chan[0].par)
- i2c_bit_del_bus(&par->chan[0].adapter);
+ i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
- i2c_bit_del_bus(&par->chan[1].adapter);
+ i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
- i2c_bit_del_bus(&par->chan[2].adapter);
+ i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
saddr2 += (var->xres * var->yres * var->bits_per_pixel)/8;
saddr2>>= 1;
- saddr3 = S3C2410_OFFSIZE(0) | S3C2410_PAGEWIDTH(var->xres);
+ saddr3 = S3C2410_OFFSIZE(0) | S3C2410_PAGEWIDTH((var->xres * var->bits_per_pixel / 16) & 0x3ff);
dprintk("LCDSADDR1 = 0x%08lx\n", saddr1);
dprintk("LCDSADDR2 = 0x%08lx\n", saddr2);
var->bits_per_pixel = fbi->mach_info->bpp.min;
/* set r/g/b positions */
+ switch (var->bits_per_pixel) {
+ case 1:
+ case 2:
+ case 4:
+ var->red.offset = 0;
+ var->red.length = var->bits_per_pixel;
+ var->green = var->red;
+ var->blue = var->red;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 8:
+ if ( fbi->mach_info->type != S3C2410_LCDCON1_TFT ) {
+ /* 8 bpp 332 */
+ var->red.length = 3;
+ var->red.offset = 5;
+ var->green.length = 3;
+ var->green.offset = 2;
+ var->blue.length = 2;
+ var->blue.offset = 0;
+ var->transp.length = 0;
+ } else {
+ var->red.offset = 0;
+ var->red.length = var->bits_per_pixel;
+ var->green = var->red;
+ var->blue = var->red;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ }
+ break;
+ case 12:
+ /* 12 bpp 444 */
+ var->red.length = 4;
+ var->red.offset = 8;
+ var->green.length = 4;
+ var->green.offset = 4;
+ var->blue.length = 4;
+ var->blue.offset = 0;
+ var->transp.length = 0;
+ break;
+
+ default:
+ case 16:
+ if (fbi->regs.lcdcon5 & S3C2410_LCDCON5_FRM565 ) {
+ /* 16 bpp, 565 format */
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->red.length = 5;
+ var->green.length = 6;
+ var->blue.length = 5;
+ var->transp.length = 0;
+ } else {
+ /* 16 bpp, 5551 format */
+ var->red.offset = 11;
+ var->green.offset = 6;
+ var->blue.offset = 1;
+ var->red.length = 5;
+ var->green.length = 5;
+ var->blue.length = 5;
+ var->transp.length = 0;
+ }
+ break;
+ case 24:
+ /* 24 bpp 888 */
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->transp.length = 0;
+ break;
- if (var->bits_per_pixel == 16) {
- var->red.offset = 11;
- var->green.offset = 5;
- var->blue.offset = 0;
- var->red.length = 5;
- var->green.length = 6;
- var->blue.length = 5;
- var->transp.length = 0;
- } else {
- var->red.length = var->bits_per_pixel;
- var->red.offset = 0;
- var->green.length = var->bits_per_pixel;
- var->green.offset = 0;
- var->blue.length = var->bits_per_pixel;
- var->blue.offset = 0;
- var->transp.length = 0;
- }
+ }
return 0;
}
+
/* s3c2410fb_activate_var
*
* activate (set) the controller from the given framebuffer
static void s3c2410fb_activate_var(struct s3c2410fb_info *fbi,
struct fb_var_screeninfo *var)
{
+ int hs;
+
fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_MODEMASK;
+ fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_TFT;
dprintk("%s: var->xres = %d\n", __FUNCTION__, var->xres);
dprintk("%s: var->yres = %d\n", __FUNCTION__, var->yres);
dprintk("%s: var->bpp = %d\n", __FUNCTION__, var->bits_per_pixel);
- switch (var->bits_per_pixel) {
- case 1:
- fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT1BPP;
- break;
- case 2:
- fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT2BPP;
- break;
- case 4:
- fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT4BPP;
- break;
- case 8:
- fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT8BPP;
- break;
- case 16:
- fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT16BPP;
- break;
- }
+ fbi->regs.lcdcon1 |= fbi->mach_info->type;
+
+ if (fbi->mach_info->type == S3C2410_LCDCON1_TFT)
+ switch (var->bits_per_pixel) {
+ case 1:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT1BPP;
+ break;
+ case 2:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT2BPP;
+ break;
+ case 4:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT4BPP;
+ break;
+ case 8:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT8BPP;
+ break;
+ case 16:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT16BPP;
+ break;
+
+ default:
+ /* invalid pixel depth */
+ dev_err(fbi->dev, "invalid bpp %d\n", var->bits_per_pixel);
+ }
+ else
+ switch (var->bits_per_pixel) {
+ case 1:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_STN1BPP;
+ break;
+ case 2:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_STN2GREY;
+ break;
+ case 4:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_STN4GREY;
+ break;
+ case 8:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_STN8BPP;
+ break;
+ case 12:
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_STN12BPP;
+ break;
+
+ default:
+ /* invalid pixel depth */
+ dev_err(fbi->dev, "invalid bpp %d\n", var->bits_per_pixel);
+ }
/* check to see if we need to update sync/borders */
fbi->regs.lcdcon2 &= ~S3C2410_LCDCON2_LINEVAL(0x3ff);
fbi->regs.lcdcon2 |= S3C2410_LCDCON2_LINEVAL(var->yres - 1);
+ switch(fbi->mach_info->type) {
+ case S3C2410_LCDCON1_DSCAN4:
+ case S3C2410_LCDCON1_STN8:
+ hs = var->xres / 8;
+ break;
+ case S3C2410_LCDCON1_STN4:
+ hs = var->xres / 4;
+ break;
+ default:
+ case S3C2410_LCDCON1_TFT:
+ hs = var->xres;
+ break;
+
+ }
+
+ /* Special cases : STN color displays */
+ if ( ((fbi->regs.lcdcon1 & S3C2410_LCDCON1_MODEMASK) == S3C2410_LCDCON1_STN8BPP) \
+ || ((fbi->regs.lcdcon1 & S3C2410_LCDCON1_MODEMASK) == S3C2410_LCDCON1_STN12BPP) ) {
+ hs = hs * 3;
+ }
+
+
fbi->regs.lcdcon3 &= ~S3C2410_LCDCON3_HOZVAL(0x7ff);
- fbi->regs.lcdcon3 |= S3C2410_LCDCON3_HOZVAL(var->xres - 1);
+ fbi->regs.lcdcon3 |= S3C2410_LCDCON3_HOZVAL(hs - 1);
if (var->pixclock > 0) {
int clkdiv = s3c2410fb_calc_pixclk(fbi, var->pixclock);
- clkdiv = (clkdiv / 2) -1;
- if (clkdiv < 0)
- clkdiv = 0;
+ if (fbi->mach_info->type == S3C2410_LCDCON1_TFT) {
+ clkdiv = (clkdiv / 2) -1;
+ if (clkdiv < 0)
+ clkdiv = 0;
+ }
+ else {
+ clkdiv = (clkdiv / 2);
+ if (clkdiv < 2)
+ clkdiv = 2;
+ }
fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_CLKVAL(0x3ff);
fbi->regs.lcdcon1 |= S3C2410_LCDCON1_CLKVAL(clkdiv);
struct s3c2410fb_info *fbi = info->par;
struct fb_var_screeninfo *var = &info->var;
- if (var->bits_per_pixel == 16)
- fbi->fb->fix.visual = FB_VISUAL_TRUECOLOR;
- else
- fbi->fb->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ switch (var->bits_per_pixel)
+ {
+ case 16:
+ fbi->fb->fix.visual = FB_VISUAL_TRUECOLOR;
+ break;
+ case 1:
+ fbi->fb->fix.visual = FB_VISUAL_MONO01;
+ break;
+ default:
+ fbi->fb->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+ }
fbi->fb->fix.line_length = (var->width*var->bits_per_pixel)/8;
struct savagefb_par *par = info->par;
if (par->chan.par)
- i2c_bit_del_bus(&par->chan.adapter);
+ i2c_del_adapter(&par->chan.adapter);
par->chan.par = NULL;
}
/* try to get from firmware */
const u8 *e = fb_firmware_edid(info->device);
- if (e) {
- edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
- if (edid)
- memcpy(edid, e, EDID_LENGTH);
- }
+ if (e)
+ edid = kmemdup(e, EDID_LENGTH, GFP_KERNEL);
}
*out_edid = edid;
void
SiS_DDC2Delay(struct SiS_Private *SiS_Pr, unsigned int delaytime)
{
- unsigned int i, j;
-
- for(i = 0; i < delaytime; i++) {
- j += SiS_GetReg(SiS_Pr->SiS_P3c4,0x05);
- }
+ while (delaytime-- > 0)
+ SiS_GetReg(SiS_Pr->SiS_P3c4, 0x05);
}
#if defined(SIS300) || defined(SIS315H)
* Remove never finished and bogus 24/32bit support
* Clean up macro abuse
* Minor tidying for format.
+ * 12/2006 Helge Deller <deller@gmx.de>
+ * add /sys/class/graphics/fbX/vgapass sysfs-interface
+ * add module option "mode_option" to set initial screen mode
+ * use fbdev default videomode database
+ * remove debug functions from ioctl
*/
/*
*
* sstfb specific ioctls:
* toggle vga (0x46db) : toggle vga_pass_through
- * fill fb (0x46dc) : fills fb
- * test disp (0x46de) : draws a test image
*/
#undef SST_DEBUG
-/*
- Default video mode .
- 0 800x600@60 took from glide
- 1 640x480@75 took from glide
- 2 1024x768@76 std fb.mode
- 3 640x480@60 glide default */
-#define DEFAULT_MODE 3
/*
* Includes
#include <linux/init.h>
#include <linux/slab.h>
#include <asm/io.h>
-#include <asm/ioctl.h>
#include <asm/uaccess.h>
#include <video/sstfb.h>
/* initialized by setup */
-static int vgapass; /* enable Vga passthrough cable */
+static int vgapass; /* enable VGA passthrough cable */
static int mem; /* mem size in MB, 0 = autodetect */
static int clipping = 1; /* use clipping (slower, safer) */
static int gfxclk; /* force FBI freq in Mhz . Dangerous */
static int slowpci; /* slow PCI settings */
-static char *mode_option __devinitdata;
+/*
+ Possible default video modes: 800x600@60, 640x480@75, 1024x768@76, 640x480@60
+*/
+#define DEFAULT_VIDEO_MODE "640x480@60"
+
+static char *mode_option __devinitdata = DEFAULT_VIDEO_MODE;
enum {
ID_VOODOO1 = 0,
{ .name = "Voodoo2", .default_gfx_clock = 75000, .max_gfxclk = 85 },
};
-static struct fb_var_screeninfo sstfb_default =
-#if ( DEFAULT_MODE == 0 )
- { /* 800x600@60, 16 bpp .borowed from glide/sst1/include/sst1init.h */
- 800, 600, 800, 600, 0, 0, 16, 0,
- {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0,
- 25000, 86, 41, 23, 1, 127, 4,
- 0, FB_VMODE_NONINTERLACED };
-#elif ( DEFAULT_MODE == 1 )
- {/* 640x480@75, 16 bpp .borowed from glide/sst1/include/sst1init.h */
- 640, 480, 640, 480, 0, 0, 16, 0,
- {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0,
- 31746, 118, 17, 16, 1, 63, 3,
- 0, FB_VMODE_NONINTERLACED };
-#elif ( DEFAULT_MODE == 2 )
- { /* 1024x768@76 took from my /etc/fb.modes */
- 1024, 768, 1024, 768,0, 0, 16,0,
- {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0,
- 11764, 208, 8, 36, 16, 120, 3 ,
- 0, FB_VMODE_NONINTERLACED };
-#elif ( DEFAULT_MODE == 3 )
- { /* 640x480@60 , 16bpp glide default ?*/
- 640, 480, 640, 480, 0, 0, 16, 0,
- {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
- 0, 0, -1, -1, 0,
- 39721 , 38, 26 , 25 ,18 , 96 ,2,
- 0, FB_VMODE_NONINTERLACED };
-#elif
- #error "Invalid DEFAULT_MODE value !"
-#endif
-
/*
* debug functions
*/
-static void sstfb_drawdebugimage(struct fb_info *info);
-static int sstfb_dump_regs(struct fb_info *info);
-
-
#if (SST_DEBUG_REG > 0)
static void sst_dbg_print_read_reg(u32 reg, u32 val) {
const char *regname;
return 0;
}
-static int sstfb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
+static void sstfb_setvgapass( struct fb_info *info, int enable )
{
struct sstfb_par *par = info->par;
struct pci_dev *sst_dev = par->dev;
- u32 fbiinit0, tmp, val;
- u_long p;
+ u32 fbiinit0, tmp;
+
+ enable = enable ? 1:0;
+ if (par->vgapass == enable)
+ return;
+ par->vgapass = enable;
+
+ pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
+ tmp | PCI_EN_INIT_WR );
+ fbiinit0 = sst_read (FBIINIT0);
+ if (par->vgapass) {
+ sst_write(FBIINIT0, fbiinit0 & ~DIS_VGA_PASSTHROUGH);
+ printk(KERN_INFO "fb%d: Enabling VGA pass-through\n", info->node );
+ } else {
+ sst_write(FBIINIT0, fbiinit0 | DIS_VGA_PASSTHROUGH);
+ printk(KERN_INFO "fb%d: Disabling VGA pass-through\n", info->node );
+ }
+ pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
+}
+
+static ssize_t store_vgapass(struct device *device, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct fb_info *info = dev_get_drvdata(device);
+ char ** last = NULL;
+ int val;
+
+ val = simple_strtoul(buf, last, 0);
+ sstfb_setvgapass(info, val);
+
+ return count;
+}
+
+static ssize_t show_vgapass(struct device *device, struct device_attribute *attr,
+ char *buf)
+{
+ struct fb_info *info = dev_get_drvdata(device);
+ struct sstfb_par *par = info->par;
+ return snprintf(buf, PAGE_SIZE, "%d\n", par->vgapass);
+}
+
+static struct device_attribute device_attrs[] = {
+ __ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass)
+ };
+
+static int sstfb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct sstfb_par *par;
+ u32 val;
switch (cmd) {
-
- /* dump current FBIINIT values to system log */
- case _IO('F', 0xdb): /* 0x46db */
- return sstfb_dump_regs(info);
-
- /* fills lfb with #arg pixels */
- case _IOW('F', 0xdc, u32): /* 0x46dc */
+ /* set/get VGA pass_through mode */
+ case SSTFB_SET_VGAPASS:
if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
return -EFAULT;
- if (val > info->fix.smem_len)
- val = info->fix.smem_len;
- for (p = 0 ; p < val; p += 2)
- writew(p >> 6, info->screen_base + p);
+ sstfb_setvgapass(info, val);
return 0;
-
- /* change VGA pass_through mode */
- case _IOW('F', 0xdd, u32): /* 0x46dd */
- if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
+ case SSTFB_GET_VGAPASS:
+ par = info->par;
+ val = par->vgapass;
+ if (copy_to_user((void __user *)arg, &val, sizeof(val)))
return -EFAULT;
- pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
- pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
- tmp | PCI_EN_INIT_WR );
- fbiinit0 = sst_read (FBIINIT0);
- if (val)
- sst_write(FBIINIT0, fbiinit0 & ~EN_VGA_PASSTHROUGH);
- else
- sst_write(FBIINIT0, fbiinit0 | EN_VGA_PASSTHROUGH);
- pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
- return 0;
-
- /* draw test image */
- case _IO('F', 0xde): /* 0x46de */
- f_dprintk("test color display at %d bpp\n",
- info->var.bits_per_pixel);
- sstfb_drawdebugimage(info);
return 0;
}
+
return -EINVAL;
}
/*
* FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only
*/
+#if 0
static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct sstfb_par *par = info->par;
| (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) | BIT(16) );
sst_wait_idle();
}
+#endif
struct pll_timing gfx_timings;
struct sst_spec *spec;
int Fout;
+ int gfx_clock;
spec = &voodoo_spec[par->type];
f_ddprintk(" fbiinit0 fbiinit1 fbiinit2 fbiinit3 fbiinit4 "
}
/* set graphic clock */
- par->gfx_clock = spec->default_gfx_clock;
+ gfx_clock = spec->default_gfx_clock;
if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) {
printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk);
- par->gfx_clock = gfxclk *1000;
+ gfx_clock = gfxclk *1000;
} else if (gfxclk) {
printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk);
}
- sst_calc_pll(par->gfx_clock, &Fout, &gfx_timings);
+ sst_calc_pll(gfx_clock, &Fout, &gfx_timings);
par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
/* disable fbiinit remap */
fbiinit0 = FBIINIT0_DEFAULT;
fbiinit1 = FBIINIT1_DEFAULT;
fbiinit4 = FBIINIT4_DEFAULT;
- if (vgapass)
- fbiinit0 &= ~EN_VGA_PASSTHROUGH;
+ par->vgapass = vgapass;
+ if (par->vgapass)
+ fbiinit0 &= ~DIS_VGA_PASSTHROUGH;
else
- fbiinit0 |= EN_VGA_PASSTHROUGH;
+ fbiinit0 |= DIS_VGA_PASSTHROUGH;
if (slowpci) {
fbiinit1 |= SLOW_PCI_WRITES;
fbiinit4 |= SLOW_PCI_READS;
/* TODO maybe shutdown the dac, vrefresh and so on... */
pci_write_config_dword(dev, PCI_INIT_ENABLE,
PCI_EN_INIT_WR);
- sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | EN_VGA_PASSTHROUGH);
+ sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | DIS_VGA_PASSTHROUGH);
pci_write_config_dword(dev, PCI_VCLK_DISABLE,0);
/* maybe keep fbiinit* and PCI_INIT_enable in the fb_info struct
* from start ? */
/*
* Interface to the world
*/
-#ifndef MODULE
-static int __init sstfb_setup(char *options)
+static int __devinit sstfb_setup(char *options)
{
char *this_opt;
}
return 0;
}
-#endif
+
static struct fb_ops sstfb_ops = {
.owner = THIS_MODULE,
*/
fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
- if ( mode_option &&
- fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16)) {
- printk(KERN_ERR "sstfb: can't set supplied video mode. Using default\n");
- info->var = sstfb_default;
- } else
- info->var = sstfb_default;
+ fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16);
if (sstfb_check_var(&info->var, info)) {
- printk(KERN_ERR "sstfb: invalid default video mode.\n");
+ printk(KERN_ERR "sstfb: invalid video mode.\n");
goto fail;
}
goto fail;
}
- if (1) /* set to 0 to see an initial bitmap instead */
- sstfb_clear_screen(info);
- else
- sstfb_drawdebugimage(info);
+ sstfb_clear_screen(info);
+
+ if (device_create_file(info->dev, &device_attrs[0]))
+ printk(KERN_WARNING "sstfb: can't create sysfs entry.\n");
+
printk(KERN_INFO "fb%d: %s frame buffer device at 0x%p\n",
info->node, fix->id, info->screen_base);
return 0;
fail:
+ fb_dealloc_cmap(&info->cmap);
iounmap(info->screen_base);
fail_fb_remap:
iounmap(par->mmio_vbase);
info = pci_get_drvdata(pdev);
par = info->par;
+ device_remove_file(info->dev, &device_attrs[0]);
sst_shutdown(info);
- unregister_framebuffer(info);
iounmap(info->screen_base);
iounmap(par->mmio_vbase);
release_mem_region(info->fix.smem_start, 0x400000);
release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+ fb_dealloc_cmap(&info->cmap);
+ unregister_framebuffer(info);
framebuffer_release(info);
}
-static struct pci_device_id sstfb_id_tbl[] = {
- { PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_VOODOO1 },
- { PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_VOODOO2 },
+static const struct pci_device_id sstfb_id_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO ),
+ .driver_data = ID_VOODOO1, },
+ { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2),
+ .driver_data = ID_VOODOO2, },
{ 0 },
};
static int __devinit sstfb_init(void)
{
-#ifndef MODULE
char *option = NULL;
if (fb_get_options("sstfb", &option))
return -ENODEV;
sstfb_setup(option);
-#endif
+
return pci_register_driver(&sstfb_driver);
}
-#ifdef MODULE
static void __devexit sstfb_exit(void)
{
pci_unregister_driver(&sstfb_driver);
}
-#endif
-/*
- * testing and debugging functions
- */
-
-static int sstfb_dump_regs(struct fb_info *info)
-{
-#ifdef SST_DEBUG
- static struct { u32 reg ; const char *reg_name;} pci_regs[] = {
- { PCI_INIT_ENABLE, "initenable"},
- { PCI_VCLK_ENABLE, "enable vclk"},
- { PCI_VCLK_DISABLE, "disable vclk"},
- };
-
- static struct { u32 reg ; const char *reg_name;} sst_regs[] = {
- {FBIINIT0,"fbiinit0"},
- {FBIINIT1,"fbiinit1"},
- {FBIINIT2,"fbiinit2"},
- {FBIINIT3,"fbiinit3"},
- {FBIINIT4,"fbiinit4"},
- {FBIINIT5,"fbiinit5"},
- {FBIINIT6,"fbiinit6"},
- {FBIINIT7,"fbiinit7"},
- {LFBMODE,"lfbmode"},
- {FBZMODE,"fbzmode"},
- };
-
- const int pci_s = ARRAY_SIZE(pci_regs);
- const int sst_s = ARRAY_SIZE(sst_regs);
- struct sstfb_par *par = info->par;
- struct pci_dev *dev = par->dev;
- u32 pci_res[pci_s];
- u32 sst_res[sst_s];
- int i;
-
- for (i=0; i<pci_s; i++) {
- pci_read_config_dword(dev, pci_regs[i].reg, &pci_res[i]);
- }
- for (i=0; i<sst_s; i++) {
- sst_res[i] = sst_read(sst_regs[i].reg);
- }
-
- dprintk("hardware register dump:\n");
- for (i=0; i<pci_s; i++) {
- dprintk("%s %0#10x\n", pci_regs[i].reg_name, pci_res[i]);
- }
- for (i=0; i<sst_s; i++) {
- dprintk("%s %0#10x\n", sst_regs[i].reg_name, sst_res[i]);
- }
- return 0;
-#else
- return -EINVAL;
-#endif
-}
-
-static void sstfb_fillrect_softw( struct fb_info *info, const struct fb_fillrect *rect)
-{
- u8 __iomem *fbbase_virt = info->screen_base;
- int x, y, w = info->var.bits_per_pixel == 16 ? 2 : 4;
- u32 color = rect->color, height = rect->height;
- u8 __iomem *p;
-
- if (w==2) color |= color<<16;
- for (y=rect->dy; height; y++, height--) {
- p = fbbase_virt + y*info->fix.line_length + rect->dx*w;
- x = rect->width;
- if (w==2) x>>=1;
- while (x) {
- writel(color, p);
- p += 4;
- x--;
- }
- }
-}
-
-static void sstfb_drawrect_XY( struct fb_info *info, int x, int y,
- int w, int h, int color, int hwfunc)
-{
- struct fb_fillrect rect;
- rect.dx = x;
- rect.dy = y;
- rect.height = h;
- rect.width = w;
- rect.color = color;
- rect.rop = ROP_COPY;
- if (hwfunc)
- sstfb_fillrect(info, &rect);
- else
- sstfb_fillrect_softw(info, &rect);
-}
-
-/* print some squares on the fb */
-static void sstfb_drawdebugimage(struct fb_info *info)
-{
- static int idx;
-
- /* clear screen */
- sstfb_clear_screen(info);
-
- idx = (idx+1) & 1;
-
- /* white rect */
- sstfb_drawrect_XY(info, 0, 0, 50, 50, 0xffff, idx);
-
- /* blue rect */
- sstfb_drawrect_XY(info, 50, 50, 50, 50, 0x001f, idx);
-
- /* green rect */
- sstfb_drawrect_XY(info, 100, 100, 80, 80, 0x07e0, idx);
-
- /* red rect */
- sstfb_drawrect_XY(info, 250, 250, 120, 100, 0xf800, idx);
-}
-
module_init(sstfb_init);
-
-#ifdef MODULE
module_exit(sstfb_exit);
-#endif
MODULE_AUTHOR("(c) 2000,2002 Ghozlane Toumi <gtoumi@laposte.net>");
MODULE_DESCRIPTION("FBDev driver for 3dfx Voodoo Graphics and Voodoo2 based video boards");
MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)");
module_param(slowpci, bool, 0);
MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Initial video mode (default=" DEFAULT_VIDEO_MODE ")");
+
out_err2:
release_mem_region(fix->smem_start, fix->smem_len);
out_err1:
+ iounmap(info->screen_base);
fb_dealloc_cmap(&info->cmap);
out_err0:
kfree(fb);
unregister_framebuffer(sti->info);
release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
release_mem_region(info->fix.smem_start, info->fix.smem_len);
+ if (info->screen_base)
+ iounmap(info->screen_base);
fb_dealloc_cmap(&info->cmap);
kfree(info);
}
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/selection.h>
+#include <linux/bitrev.h>
#include <asm/io.h>
#include <video/tgafb.h>
static void
tgafb_imageblit(struct fb_info *info, const struct fb_image *image)
{
- static unsigned char const bitrev[256] = {
- 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
- 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
- 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
- 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
- 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
- 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
- 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
- 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
- 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
- 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
- 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
- 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
- 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
- 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
- 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
- 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
- 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
- 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
- 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
- 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
- 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
- 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
- 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
- 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
- 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
- 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
- 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
- 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
- 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
- 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
- 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
- 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff
- };
-
struct tga_par *par = (struct tga_par *) info->par;
u32 fgcolor, bgcolor, dx, dy, width, height, vxres, vyres, pixelmask;
unsigned long rincr, line_length, shift, pos, is8bpp;
/* The image data is bit big endian; we need
little endian. */
for (j = 0; j < bwidth; ++j)
- mask |= bitrev[data[j]] << (j * 8);
+ mask |= bitrev8(data[j]) << (j * 8);
__raw_writel(mask << shift, fb_base + pos);
for (i = 0; i < height; ++i) {
for (j = 0; j < bwidth; j += 4) {
u32 mask = 0;
- mask |= bitrev[data[j+0]] << (0 * 8);
- mask |= bitrev[data[j+1]] << (1 * 8);
- mask |= bitrev[data[j+2]] << (2 * 8);
- mask |= bitrev[data[j+3]] << (3 * 8);
+ mask |= bitrev8(data[j+0]) << (0 * 8);
+ mask |= bitrev8(data[j+1]) << (1 * 8);
+ mask |= bitrev8(data[j+2]) << (2 * 8);
+ mask |= bitrev8(data[j+3]) << (3 * 8);
__raw_writel(mask, fb_base + pos + j*bincr);
}
pos += line_length;
for (i = 0; i < height; ++i) {
u32 mask = 0;
for (j = 0; j < bwidth; ++j)
- mask |= bitrev[data[j]] << (j * 8);
+ mask |= bitrev8(data[j]) << (j * 8);
__raw_writel(mask, fb_base + pos);
pos += line_length;
data += rincr;
for (i = 0; i < height; ++i) {
for (j = 0; j < bwidth; j += 2) {
u32 mask = 0;
- mask |= bitrev[data[j+0]] << (0 * 8);
- mask |= bitrev[data[j+1]] << (1 * 8);
+ mask |= bitrev8(data[j+0]) << (0 * 8);
+ mask |= bitrev8(data[j+1]) << (1 * 8);
mask <<= shift;
__raw_writel(mask, fb_base + pos + j*bincr);
}
bwidth = (width & 15) > 8;
for (i = 0; i < height; ++i) {
- u32 mask = bitrev[data[0]];
+ u32 mask = bitrev8(data[0]);
if (bwidth)
- mask |= bitrev[data[1]] << 8;
+ mask |= bitrev8(data[1]) << 8;
mask <<= shift;
__raw_writel(mask, fb_base + pos);
pos += line_length;
return 0;
err1:
+ if (mem_base)
+ iounmap(mem_base);
release_mem_region(bar0_start, bar0_len);
err0:
kfree(all);
if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
debug("request_mem_region failed!\n");
- return -1;
+ err = -1;
+ goto out_unmap;
}
fb_info.screen_base = ioremap_nocache(tridentfb_fix.smem_start,
if (!fb_info.screen_base) {
release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
debug("ioremap failed\n");
- return -1;
+ err = -1;
+ goto out_unmap;
}
output("%s board found\n", pci_name(dev));
#endif
fb_info.pseudo_palette = pseudo_pal;
- if (!fb_find_mode(&default_var,&fb_info,mode,NULL,0,NULL,bpp))
- return -EINVAL;
+ if (!fb_find_mode(&default_var,&fb_info,mode,NULL,0,NULL,bpp)) {
+ err = -EINVAL;
+ goto out_unmap;
+ }
fb_alloc_cmap(&fb_info.cmap,256,0);
if (defaultaccel && acc)
default_var.accel_flags |= FB_ACCELF_TEXT;
fb_info.device = &dev->dev;
if (register_framebuffer(&fb_info) < 0) {
printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
- return -EINVAL;
+ err = -EINVAL;
+ goto out_unmap;
}
output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
fb_info.node, fb_info.fix.id,default_var.xres,
default_var.yres,default_var.bits_per_pixel);
return 0;
+
+out_unmap:
+ if (default_par.io_virt)
+ iounmap(default_par.io_virt);
+ if (fb_info.screen_base)
+ iounmap(fb_info.screen_base);
+ return err;
}
static void __devexit trident_pci_remove(struct pci_dev * dev)
.accel = FB_ACCEL_NONE,
};
-static int inverse = 0;
-static int mtrr = 0; /* disable mtrr */
-static int vram_remap __initdata = 0; /* Set amount of memory to be used */
-static int vram_total __initdata = 0; /* Set total amount of memory */
-static int pmi_setpal = 1; /* pmi for palette changes ??? */
-static int ypan = 0; /* 0..nothing, 1..ypan, 2..ywrap */
-static unsigned short *pmi_base = NULL;
-static void (*pmi_start)(void);
-static void (*pmi_pal)(void);
-static int depth;
-static int vga_compat;
+static int inverse __read_mostly;
+static int mtrr __read_mostly; /* disable mtrr */
+static int vram_remap __initdata; /* Set amount of memory to be used */
+static int vram_total __initdata; /* Set total amount of memory */
+static int pmi_setpal __read_mostly = 1; /* pmi for palette changes ??? */
+static int ypan __read_mostly; /* 0..nothing, 1..ypan, 2..ywrap */
+static void (*pmi_start)(void) __read_mostly;
+static void (*pmi_pal) (void) __read_mostly;
+static int depth __read_mostly;
+static int vga_compat __read_mostly;
/* --------------------------------------------------------------------- */
static int vesafb_pan_display(struct fb_var_screeninfo *var,
ypan = pmi_setpal = 0; /* not available or some DOS TSR ... */
if (ypan || pmi_setpal) {
+ unsigned short *pmi_base;
pmi_base = (unsigned short*)phys_to_virt(((unsigned long)screen_info.vesapm_seg << 4) + screen_info.vesapm_off);
pmi_start = (void*)((char*)pmi_base + pmi_base[1]);
pmi_pal = (void*)((char*)pmi_base + pmi_base[2]);
info->node, info->fix.id);
return 0;
err:
+ if (info->screen_base)
+ iounmap(info->screen_base);
framebuffer_release(info);
release_mem_region(vesafb_fix.smem_start, size_total);
return err;
const struct fb_info *info,
int mul, int div)
{
- static struct {
+ static const struct {
u32 pixclock;
u8 misc;
u8 seq_clock_mode;
static void ega16_setpalette(int regno, unsigned red, unsigned green, unsigned blue)
{
- static unsigned char map[] = { 000, 001, 010, 011 };
+ static const unsigned char map[] = { 000, 001, 010, 011 };
int val;
if (regno >= 16)
}
}
-#ifdef __LITTLE_ENDIAN
-static unsigned int transl_l[] =
-{0x0,0x8,0x4,0xC,0x2,0xA,0x6,0xE,0x1,0x9,0x5,0xD,0x3,0xB,0x7,0xF};
-static unsigned int transl_h[] =
-{0x000, 0x800, 0x400, 0xC00, 0x200, 0xA00, 0x600, 0xE00,
- 0x100, 0x900, 0x500, 0xD00, 0x300, 0xB00, 0x700, 0xF00};
-#else
-#ifdef __BIG_ENDIAN
-static unsigned int transl_h[] =
-{0x0,0x8,0x4,0xC,0x2,0xA,0x6,0xE,0x1,0x9,0x5,0xD,0x3,0xB,0x7,0xF};
-static unsigned int transl_l[] =
-{0x000, 0x800, 0x400, 0xC00, 0x200, 0xA00, 0x600, 0xE00,
- 0x100, 0x900, 0x500, 0xD00, 0x300, 0xB00, 0x700, 0xF00};
+#define TRANS_MASK_LOW {0x0,0x8,0x4,0xC,0x2,0xA,0x6,0xE,0x1,0x9,0x5,0xD,0x3,0xB,0x7,0xF}
+#define TRANS_MASK_HIGH {0x000, 0x800, 0x400, 0xC00, 0x200, 0xA00, 0x600, 0xE00, \
+ 0x100, 0x900, 0x500, 0xD00, 0x300, 0xB00, 0x700, 0xF00}
+
+#if defined(__LITTLE_ENDIAN)
+static const u16 transl_l[] = TRANS_MASK_LOW;
+static const u16 transl_h[] = TRANS_MASK_HIGH;
+#elif defined(__BIG_ENDIAN)
+static const u16 transl_l[] = TRANS_MASK_HIGH;
+static const u16 transl_h[] = TRANS_MASK_LOW;
#else
#error "Only __BIG_ENDIAN and __LITTLE_ENDIAN are supported in vga-planes"
#endif
-#endif
static void vga_8planes_imageblit(struct fb_info *info, const struct fb_image *image)
{
#warning release resources
printk(KERN_ERR "virgefb.c: register_framebuffer failed\n");
DPRINTK("EXIT\n");
- return -EINVAL;
+ goto out_unmap;
}
printk(KERN_INFO "fb%d: %s frame buffer device, using %ldK of video memory\n",
DPRINTK("EXIT\n");
return 0;
+
+out_unmap:
+ if (board_addr >= 0x01000000) {
+ if (v_ram)
+ iounmap((void*)v_ram);
+ if (vgaio_regs)
+ iounmap(vgaio_regs);
+ if (mmio_regs)
+ iounmap(mmio_regs);
+ if (vcode_switch_base)
+ iounmap((void*)vcode_switch_base);
+ v_ram = vcode_switch_base = 0;
+ vgaio_regs = mmio_regs = NULL;
+ }
+ return -EINVAL;
}
tristate "Thermal family implementation"
depends on W1
help
- Say Y here if you want to connect 1-wire thermal sensors to you
+ Say Y here if you want to connect 1-wire thermal sensors to your
wire.
config W1_SLAVE_SMEM
depends on W1
help
Say Y here if you want to connect 1-wire
- simple 64bit memory rom(ds2401/ds2411/ds1990*) to you wire.
+ simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
config W1_SLAVE_DS2433
tristate "4kb EEPROM family support (DS2433)"
static ssize_t
proc_bus_zorro_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
{
- struct inode *ino = file->f_dentry->d_inode;
+ struct inode *ino = file->f_path.dentry->d_inode;
struct proc_dir_entry *dp = PDE(ino);
struct zorro_dev *z = dp->data;
struct ConfigDev cd;
int retval = -EIO;
loff_t offset = page_offset(page);
int count = PAGE_CACHE_SIZE;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode);
int rsize = v9ses->maxdata - V9FS_IOHDRSZ;
struct v9fs_fid *v9f = filp->private_data;
static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
struct v9fs_fcall *fcall = NULL;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode);
struct v9fs_fid *file = filp->private_data;
unsigned int i, n, s;
struct v9fs_stat stat;
int over = 0;
- dprintk(DEBUG_VFS, "name %s\n", filp->f_dentry->d_name.name);
+ dprintk(DEBUG_VFS, "name %s\n", filp->f_path.dentry->d_name.name);
fid = file->fid;
dprintk(DEBUG_VFS, "inode: %p file: %p \n", inode, file);
- vfid = v9fs_fid_lookup(file->f_dentry);
+ vfid = v9fs_fid_lookup(file->f_path.dentry);
if (!vfid) {
dprintk(DEBUG_ERROR, "Couldn't resolve fid from dentry\n");
return -EBADF;
static int v9fs_file_lock(struct file *filp, int cmd, struct file_lock *fl)
{
int res = 0;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
dprintk(DEBUG_VFS, "filp: %p lock: %p\n", filp, fl);
v9fs_file_read(struct file *filp, char __user * data, size_t count,
loff_t * offset)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode);
struct v9fs_fid *v9f = filp->private_data;
struct v9fs_fcall *fcall = NULL;
v9fs_file_write(struct file *filp, const char __user * data,
size_t count, loff_t * offset)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode);
struct v9fs_fid *v9fid = filp->private_data;
struct v9fs_fcall *fcall;
Ext2 is a standard Linux file system for hard disks.
To compile this file system support as a module, choose M here: the
- module will be called ext2. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext2.
If unsure, say Y.
(available at <http://sourceforge.net/projects/e2fsprogs/>).
To compile this file system support as a module, choose M here: the
- module will be called ext3. Be aware however that the file system
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this may be dangerous.
+ module will be called ext3.
config EXT3_FS_XATTR
bool "Ext3 extended attributes"
features will be added to ext4dev gradually.
To compile this file system support as a module, choose M here. The
- module will be called ext4dev. Be aware, however, that the filesystem
- of your root partition (the one containing the directory /) cannot
- be compiled as a module, and so this could be dangerous.
+ module will be called ext4dev.
If unsure, say N.
config HUGETLBFS
bool "HugeTLB file system support"
- depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
+ depends on X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read
ioctl.o readdir.o select.o fifo.o locks.o dcache.o inode.o \
attr.o bad_inode.o file.o filesystems.o namespace.o aio.o \
seq_file.o xattr.o libfs.o fs-writeback.o \
- pnode.o drop_caches.o splice.o sync.o utimes.o
+ pnode.o drop_caches.o splice.o sync.o utimes.o \
+ stack.o
ifeq ($(CONFIG_BLOCK),y)
obj-y += buffer.o bio.o block_dev.o direct-io.o mpage.o ioprio.o
static int
adfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
struct adfs_dir_ops *ops = ADFS_SB(sb)->s_dir;
struct object_info obj;
static int
affs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
struct buffer_head *dir_bh;
struct buffer_head *fh_bh;
stored++;
}
if (f_pos == 1) {
- if (filldir(dirent, "..", 2, f_pos, parent_ino(filp->f_dentry), DT_DIR) < 0)
+ if (filldir(dirent, "..", 2, f_pos, parent_ino(filp->f_path.dentry), DT_DIR) < 0)
return stored;
filp->f_pos = f_pos = 2;
stored++;
unsigned fpos;
int ret;
- _enter("{%Ld,{%lu}}", file->f_pos, file->f_dentry->d_inode->i_ino);
+ _enter("{%Ld,{%lu}}", file->f_pos, file->f_path.dentry->d_inode->i_ino);
fpos = file->f_pos;
- ret = afs_dir_iterate(file->f_dentry->d_inode, &fpos, cookie, filldir);
+ ret = afs_dir_iterate(file->f_path.dentry->d_inode, &fpos, cookie, filldir);
file->f_pos = fpos;
_leave(" = %d", ret);
#include <linux/pagemap.h>
#include <linux/mount.h>
#include <linux/namei.h>
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include "super.h"
#include "cell.h"
#include "volume.h"
{
kenter("%p,%p{%p{%s},%s}",
inode, file,
- file->f_dentry->d_parent,
- file->f_dentry->d_parent ?
- file->f_dentry->d_parent->d_name.name :
+ file->f_path.dentry->d_parent,
+ file->f_path.dentry->d_parent ?
+ file->f_path.dentry->d_parent->d_name.name :
(const unsigned char *) "",
- file->f_dentry->d_name.name);
+ file->f_path.dentry->d_name.name);
return -EREMOTE;
} /* end afs_mntpt_open() */
* Note that on UML this *requires* PF_BORROWED_MM to be set, otherwise
* it won't work. Update it accordingly if you change it here
*/
- activate_mm(active_mm, mm);
+ switch_mm(active_mm, mm, tsk);
task_unlock(tsk);
mmdrop(active_mm);
struct autofs_dir_ent *ent = NULL;
struct autofs_dirhash *dirhash;
struct autofs_sb_info *sbi;
- struct inode * inode = filp->f_dentry->d_inode;
+ struct inode * inode = filp->f_path.dentry->d_inode;
off_t onr, nr;
lock_kernel();
case AUTOFS_IOC_SETTIMEOUT:
return autofs_get_set_timeout(sbi, argp);
case AUTOFS_IOC_EXPIRE:
- return autofs_expire_run(inode->i_sb, sbi, filp->f_vfsmnt,
+ return autofs_expire_run(inode->i_sb, sbi, filp->f_path.mnt,
argp);
default:
return -ENOSYS;
static inline void autofs4_copy_atime(struct file *src, struct file *dst)
{
- dst->f_dentry->d_inode->i_atime = src->f_dentry->d_inode->i_atime;
+ dst->f_path.dentry->d_inode->i_atime =
+ src->f_path.dentry->d_inode->i_atime;
return;
}
struct autofs_sb_info *sbi;
struct autofs_info *ino;
- sbi = (struct autofs_sb_info *) kmalloc(sizeof(*sbi), GFP_KERNEL);
+ sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
if ( !sbi )
goto fail_unlock;
DPRINTK("starting up, sbi = %p",sbi);
static int autofs4_root_readdir(struct file *file, void *dirent,
filldir_t filldir)
{
- struct autofs_sb_info *sbi = autofs4_sbi(file->f_dentry->d_sb);
+ struct autofs_sb_info *sbi = autofs4_sbi(file->f_path.dentry->d_sb);
int oz_mode = autofs4_oz_mode(sbi);
DPRINTK("called, filp->f_pos = %lld", file->f_pos);
static int autofs4_dir_open(struct inode *inode, struct file *file)
{
- struct dentry *dentry = file->f_dentry;
- struct vfsmount *mnt = file->f_vfsmnt;
+ struct dentry *dentry = file->f_path.dentry;
+ struct vfsmount *mnt = file->f_path.mnt;
struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
struct dentry *cursor;
int status;
static int autofs4_dir_close(struct inode *inode, struct file *file)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
struct dentry *cursor = file->private_data;
int status = 0;
static int autofs4_dir_readdir(struct file *file, void *dirent, filldir_t filldir)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
struct dentry *cursor = file->private_data;
int status;
return autofs4_ask_reghost(sbi, p);
case AUTOFS_IOC_ASKUMOUNT:
- return autofs4_ask_umount(filp->f_vfsmnt, p);
+ return autofs4_ask_umount(filp->f_path.mnt, p);
/* return a single thing to expire */
case AUTOFS_IOC_EXPIRE:
- return autofs4_expire_run(inode->i_sb,filp->f_vfsmnt,sbi, p);
+ return autofs4_expire_run(inode->i_sb,filp->f_path.mnt,sbi, p);
/* same as above, but can send multiple expires through pipe */
case AUTOFS_IOC_EXPIRE_MULTI:
- return autofs4_expire_multi(inode->i_sb,filp->f_vfsmnt,sbi, p);
+ return autofs4_expire_multi(inode->i_sb,filp->f_path.mnt,sbi, p);
default:
return -ENOSYS;
goto error;
}
- this_node = (befs_btree_node *) kmalloc(sizeof (befs_btree_node),
+ this_node = kmalloc(sizeof (befs_btree_node),
GFP_NOFS);
if (!this_node) {
befs_error(sb, "befs_btree_find() failed to allocate %u "
befs_error(const struct super_block *sb, const char *fmt, ...)
{
va_list args;
- char *err_buf = (char *) kmalloc(ERRBUFSIZE, GFP_KERNEL);
+ char *err_buf = kmalloc(ERRBUFSIZE, GFP_KERNEL);
if (err_buf == NULL) {
printk(KERN_ERR "could not allocate %d bytes\n", ERRBUFSIZE);
return;
befs_warning(const struct super_block *sb, const char *fmt, ...)
{
va_list args;
- char *err_buf = (char *) kmalloc(ERRBUFSIZE, GFP_KERNEL);
+ char *err_buf = kmalloc(ERRBUFSIZE, GFP_KERNEL);
if (err_buf == NULL) {
printk(KERN_ERR "could not allocate %d bytes\n", ERRBUFSIZE);
return;
char *err_buf = NULL;
if (BEFS_SB(sb)->mount_opts.debug) {
- err_buf = (char *) kmalloc(ERRBUFSIZE, GFP_KERNEL);
+ err_buf = kmalloc(ERRBUFSIZE, GFP_KERNEL);
if (err_buf == NULL) {
printk(KERN_ERR "could not allocate %d bytes\n",
ERRBUFSIZE);
static int
befs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
befs_data_stream *ds = &BEFS_I(inode)->i_data.ds;
befs_off_t value;
char keybuf[BEFS_NAME_LEN + 1];
char *nlsname;
int nlsnamelen;
- const char *dirname = filp->f_dentry->d_name.name;
+ const char *dirname = filp->f_path.dentry->d_name.name;
befs_debug(sb, "---> befs_readdir() "
"name %s, inode %ld, filp->f_pos %Ld",
static int bfs_readdir(struct file * f, void * dirent, filldir_t filldir)
{
- struct inode * dir = f->f_dentry->d_inode;
+ struct inode * dir = f->f_path.dentry->d_inode;
struct buffer_head * bh;
struct bfs_dirent * de;
unsigned int offset;
/*
* fs/bfs/inode.c
* BFS superblock and inode operations.
- * Copyright (C) 1999,2000 Tigran Aivazian <tigran@veritas.com>
+ * Copyright (C) 1999-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
* From fs/minix, Copyright (C) 1991, 1992 Linus Torvalds.
*
* Made endianness-clean by Andrew Stribblehill <ads@wompom.org>, 2005.
#include <asm/uaccess.h>
#include "bfs.h"
-MODULE_AUTHOR("Tigran A. Aivazian <tigran@veritas.com>");
+MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
MODULE_DESCRIPTION("SCO UnixWare BFS filesystem for Linux");
MODULE_LICENSE("GPL");
if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != OMAGIC &&
N_MAGIC(ex) != QMAGIC && N_MAGIC(ex) != NMAGIC) ||
N_TRSIZE(ex) || N_DRSIZE(ex) ||
- i_size_read(bprm->file->f_dentry->d_inode) < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
+ i_size_read(bprm->file->f_path.dentry->d_inode) < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
return -ENOEXEC;
}
{
printk(KERN_WARNING
"fd_offset is not page aligned. Please convert program: %s\n",
- bprm->file->f_dentry->d_name.name);
+ bprm->file->f_path.dentry->d_name.name);
error_time = jiffies;
}
int retval;
struct exec ex;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
retval = -ENOEXEC;
error = kernel_read(file, 0, (char *) &ex, sizeof(ex));
{
printk(KERN_WARNING
"N_TXTOFF is not page aligned. Please convert library: %s\n",
- file->f_dentry->d_name.name);
+ file->f_path.dentry->d_name.name);
error_time = jiffies;
}
down_write(¤t->mm->mmap_sem);
/* Dump shared memory only if mapped from an anonymous file. */
if (vma->vm_flags & VM_SHARED)
- return vma->vm_file->f_dentry->d_inode->i_nlink == 0;
+ return vma->vm_file->f_path.dentry->d_inode->i_nlink == 0;
/* If it hasn't been written to, don't write it out */
if (!vma->anon_vma)
prstatus->pr_pid = p->pid;
prstatus->pr_ppid = p->parent->pid;
prstatus->pr_pgrp = process_group(p);
- prstatus->pr_sid = p->signal->session;
+ prstatus->pr_sid = process_session(p);
if (thread_group_leader(p)) {
/*
* This is the record for the group leader. Add in the
psinfo->pr_pid = p->pid;
psinfo->pr_ppid = p->parent->pid;
psinfo->pr_pgrp = process_group(p);
- psinfo->pr_sid = p->signal->session;
+ psinfo->pr_sid = process_session(p);
i = p->state ? ffz(~p->state) + 1 : 0;
psinfo->pr_state = i;
return -ELIBBAD;
size = sizeof(*loadmap) + nloads * sizeof(*seg);
- loadmap = kmalloc(size, GFP_KERNEL);
+ loadmap = kzalloc(size, GFP_KERNEL);
if (!loadmap)
return -ENOMEM;
params->loadmap = loadmap;
- memset(loadmap, 0, size);
loadmap->version = ELF32_FDPIC_LOADMAP_VERSION;
loadmap->nsegs = nloads;
dynamic_error:
printk("ELF FDPIC %s with invalid DYNAMIC section (inode=%lu)\n",
- what, file->f_dentry->d_inode->i_ino);
+ what, file->f_path.dentry->d_inode->i_ino);
return -ELIBBAD;
}
/* Dump shared memory only if mapped from an anonymous file. */
if (vma->vm_flags & VM_SHARED) {
- if (vma->vm_file->f_dentry->d_inode->i_nlink == 0) {
+ if (vma->vm_file->f_path.dentry->d_inode->i_nlink == 0) {
kdcore("%08lx: %08lx: no (share)", vma->vm_start, vma->vm_flags);
return 1;
}
prstatus->pr_pid = p->pid;
prstatus->pr_ppid = p->parent->pid;
prstatus->pr_pgrp = process_group(p);
- prstatus->pr_sid = p->signal->session;
+ prstatus->pr_sid = process_session(p);
if (thread_group_leader(p)) {
/*
* This is the record for the group leader. Add in the
psinfo->pr_pid = p->pid;
psinfo->pr_ppid = p->parent->pid;
psinfo->pr_pgrp = process_group(p);
- psinfo->pr_sid = p->signal->session;
+ psinfo->pr_sid = process_session(p);
i = p->state ? ffz(~p->state) + 1 : 0;
psinfo->pr_state = i;
int ret;
hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
- inode = bprm->file->f_dentry->d_inode;
+ inode = bprm->file->f_path.dentry->d_inode;
text_len = ntohl(hdr->data_start);
data_len = ntohl(hdr->data_end) - ntohl(hdr->data_start);
err = -ENOMEM;
memsize = sizeof(Node) + count + 8;
- e = (Node *) kmalloc(memsize, GFP_USER);
+ e = kmalloc(memsize, GFP_USER);
if (!e)
goto out;
static ssize_t
bm_entry_read(struct file * file, char __user * buf, size_t nbytes, loff_t *ppos)
{
- Node *e = file->f_dentry->d_inode->i_private;
+ Node *e = file->f_path.dentry->d_inode->i_private;
loff_t pos = *ppos;
ssize_t res;
char *page;
size_t count, loff_t *ppos)
{
struct dentry *root;
- Node *e = file->f_dentry->d_inode->i_private;
+ Node *e = file->f_path.dentry->d_inode->i_private;
int res = parse_command(buffer, count);
switch (res) {
break;
case 2: set_bit(Enabled, &e->flags);
break;
- case 3: root = dget(file->f_vfsmnt->mnt_sb->s_root);
+ case 3: root = dget(file->f_path.mnt->mnt_sb->s_root);
mutex_lock(&root->d_inode->i_mutex);
kill_node(e);
Node *e;
struct inode *inode;
struct dentry *root, *dentry;
- struct super_block *sb = file->f_vfsmnt->mnt_sb;
+ struct super_block *sb = file->f_path.mnt->mnt_sb;
int err = 0;
e = create_entry(buffer, count);
switch (res) {
case 1: enabled = 0; break;
case 2: enabled = 1; break;
- case 3: root = dget(file->f_vfsmnt->mnt_sb->s_root);
+ case 3: root = dget(file->f_path.mnt->mnt_sb->s_root);
mutex_lock(&root->d_inode->i_mutex);
while (!list_empty(&entries))
}
}
-static void bio_release_pages(struct bio *bio)
+void bio_release_pages(struct bio *bio)
{
struct bio_vec *bvec = bio->bi_io_vec;
int i;
return 0;
}
-static int
-blkdev_get_blocks(struct inode *inode, sector_t iblock,
- struct buffer_head *bh, int create)
+static int blk_end_aio(struct bio *bio, unsigned int bytes_done, int error)
{
- sector_t end_block = max_block(I_BDEV(inode));
- unsigned long max_blocks = bh->b_size >> inode->i_blkbits;
+ struct kiocb *iocb = bio->bi_private;
+ atomic_t *bio_count = &iocb->ki_bio_count;
- if ((iblock + max_blocks) > end_block) {
- max_blocks = end_block - iblock;
- if ((long)max_blocks <= 0) {
- if (create)
- return -EIO; /* write fully beyond EOF */
- /*
- * It is a read which is fully beyond EOF. We return
- * a !buffer_mapped buffer
- */
- max_blocks = 0;
- }
+ if (bio_data_dir(bio) == READ)
+ bio_check_pages_dirty(bio);
+ else {
+ bio_release_pages(bio);
+ bio_put(bio);
+ }
+
+ /* iocb->ki_nbytes stores error code from LLDD */
+ if (error)
+ iocb->ki_nbytes = -EIO;
+
+ if (atomic_dec_and_test(bio_count)) {
+ if (iocb->ki_nbytes < 0)
+ aio_complete(iocb, iocb->ki_nbytes, 0);
+ else
+ aio_complete(iocb, iocb->ki_left, 0);
}
- bh->b_bdev = I_BDEV(inode);
- bh->b_blocknr = iblock;
- bh->b_size = max_blocks << inode->i_blkbits;
- if (max_blocks)
- set_buffer_mapped(bh);
return 0;
}
+#define VEC_SIZE 16
+struct pvec {
+ unsigned short nr;
+ unsigned short idx;
+ struct page *page[VEC_SIZE];
+};
+
+#define PAGES_SPANNED(addr, len) \
+ (DIV_ROUND_UP((addr) + (len), PAGE_SIZE) - (addr) / PAGE_SIZE);
+
+/*
+ * get page pointer for user addr, we internally cache struct page array for
+ * (addr, count) range in pvec to avoid frequent call to get_user_pages. If
+ * internal page list is exhausted, a batch count of up to VEC_SIZE is used
+ * to get next set of page struct.
+ */
+static struct page *blk_get_page(unsigned long addr, size_t count, int rw,
+ struct pvec *pvec)
+{
+ int ret, nr_pages;
+ if (pvec->idx == pvec->nr) {
+ nr_pages = PAGES_SPANNED(addr, count);
+ nr_pages = min(nr_pages, VEC_SIZE);
+ down_read(¤t->mm->mmap_sem);
+ ret = get_user_pages(current, current->mm, addr, nr_pages,
+ rw == READ, 0, pvec->page, NULL);
+ up_read(¤t->mm->mmap_sem);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ pvec->nr = ret;
+ pvec->idx = 0;
+ }
+ return pvec->page[pvec->idx++];
+}
+
static ssize_t
blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov,
- loff_t offset, unsigned long nr_segs)
-{
- struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_mapping->host;
+ loff_t pos, unsigned long nr_segs)
+{
+ struct inode *inode = iocb->ki_filp->f_mapping->host;
+ unsigned blkbits = blksize_bits(bdev_hardsect_size(I_BDEV(inode)));
+ unsigned blocksize_mask = (1 << blkbits) - 1;
+ unsigned long seg = 0; /* iov segment iterator */
+ unsigned long nvec; /* number of bio vec needed */
+ unsigned long cur_off; /* offset into current page */
+ unsigned long cur_len; /* I/O len of current page, up to PAGE_SIZE */
+
+ unsigned long addr; /* user iovec address */
+ size_t count; /* user iovec len */
+ size_t nbytes = iocb->ki_nbytes = iocb->ki_left; /* total xfer size */
+ loff_t size; /* size of block device */
+ struct bio *bio;
+ atomic_t *bio_count = &iocb->ki_bio_count;
+ struct page *page;
+ struct pvec pvec;
+
+ pvec.nr = 0;
+ pvec.idx = 0;
+
+ if (pos & blocksize_mask)
+ return -EINVAL;
+
+ size = i_size_read(inode);
+ if (pos + nbytes > size) {
+ nbytes = size - pos;
+ iocb->ki_left = nbytes;
+ }
+
+ /*
+ * check first non-zero iov alignment, the remaining
+ * iov alignment is checked inside bio loop below.
+ */
+ do {
+ addr = (unsigned long) iov[seg].iov_base;
+ count = min(iov[seg].iov_len, nbytes);
+ if (addr & blocksize_mask || count & blocksize_mask)
+ return -EINVAL;
+ } while (!count && ++seg < nr_segs);
+ atomic_set(bio_count, 1);
+
+ while (nbytes) {
+ /* roughly estimate number of bio vec needed */
+ nvec = (nbytes + PAGE_SIZE - 1) / PAGE_SIZE;
+ nvec = max(nvec, nr_segs - seg);
+ nvec = min(nvec, (unsigned long) BIO_MAX_PAGES);
+
+ /* bio_alloc should not fail with GFP_KERNEL flag */
+ bio = bio_alloc(GFP_KERNEL, nvec);
+ bio->bi_bdev = I_BDEV(inode);
+ bio->bi_end_io = blk_end_aio;
+ bio->bi_private = iocb;
+ bio->bi_sector = pos >> blkbits;
+same_bio:
+ cur_off = addr & ~PAGE_MASK;
+ cur_len = PAGE_SIZE - cur_off;
+ if (count < cur_len)
+ cur_len = count;
+
+ page = blk_get_page(addr, count, rw, &pvec);
+ if (unlikely(IS_ERR(page)))
+ goto backout;
+
+ if (bio_add_page(bio, page, cur_len, cur_off)) {
+ pos += cur_len;
+ addr += cur_len;
+ count -= cur_len;
+ nbytes -= cur_len;
+
+ if (count)
+ goto same_bio;
+ while (++seg < nr_segs) {
+ addr = (unsigned long) iov[seg].iov_base;
+ count = iov[seg].iov_len;
+ if (!count)
+ continue;
+ if (unlikely(addr & blocksize_mask ||
+ count & blocksize_mask)) {
+ page = ERR_PTR(-EINVAL);
+ goto backout;
+ }
+ count = min(count, nbytes);
+ goto same_bio;
+ }
+ }
+
+ /* bio is ready, submit it */
+ if (rw == READ)
+ bio_set_pages_dirty(bio);
+ atomic_inc(bio_count);
+ submit_bio(rw, bio);
+ }
+
+completion:
+ iocb->ki_left -= nbytes;
+ nbytes = iocb->ki_left;
+ iocb->ki_pos += nbytes;
+
+ blk_run_address_space(inode->i_mapping);
+ if (atomic_dec_and_test(bio_count))
+ aio_complete(iocb, nbytes, 0);
+
+ return -EIOCBQUEUED;
- return blockdev_direct_IO_no_locking(rw, iocb, inode, I_BDEV(inode),
- iov, offset, nr_segs, blkdev_get_blocks, NULL);
+backout:
+ /*
+ * back out nbytes count constructed so far for this bio,
+ * we will throw away current bio.
+ */
+ nbytes += bio->bi_size;
+ bio_release_pages(bio);
+ bio_put(bio);
+
+ /*
+ * if no bio was submmitted, return the error code.
+ * otherwise, proceed with pending I/O completion.
+ */
+ if (atomic_read(bio_count) == 1)
+ return PTR_ERR(page);
+ goto completion;
}
static int blkdev_writepage(struct page *page, struct writeback_control *wbc)
/*
* private llseek:
- * for a block special file file->f_dentry->d_inode->i_size is zero
+ * for a block special file file->f_path.dentry->d_inode->i_size is zero
* so we compute the size by hand (just as in block_read/write above)
*/
static loff_t block_llseek(struct file *file, loff_t offset, int origin)
if (!bo)
return -ENOMEM;
- mutex_lock_nested(&bdev->bd_mutex, BD_MUTEX_PARTITION);
+ mutex_lock(&bdev->bd_mutex);
res = bd_claim(bdev, holder);
if (res == 0) {
found = find_bd_holder(bdev, bo);
if (!kobj)
return;
- mutex_lock_nested(&bdev->bd_mutex, BD_MUTEX_PARTITION);
+ mutex_lock(&bdev->bd_mutex);
bd_release(bdev);
if ((bo = del_bd_holder(bdev, kobj)))
free_bd_holder(bo);
EXPORT_SYMBOL(open_by_devnum);
-static int
-blkdev_get_partition(struct block_device *bdev, mode_t mode, unsigned flags);
-
-struct block_device *open_partition_by_devnum(dev_t dev, unsigned mode)
-{
- struct block_device *bdev = bdget(dev);
- int err = -ENOMEM;
- int flags = mode & FMODE_WRITE ? O_RDWR : O_RDONLY;
- if (bdev)
- err = blkdev_get_partition(bdev, mode, flags);
- return err ? ERR_PTR(err) : bdev;
-}
-
-EXPORT_SYMBOL(open_partition_by_devnum);
-
-
/*
* This routine checks whether a removable media has been changed,
* and invalidates all buffer-cache-entries in that case. This
}
EXPORT_SYMBOL(bd_set_size);
-static int __blkdev_put(struct block_device *bdev, unsigned int subclass)
-{
- int ret = 0;
- struct inode *bd_inode = bdev->bd_inode;
- struct gendisk *disk = bdev->bd_disk;
+static int __blkdev_get(struct block_device *bdev, mode_t mode, unsigned flags,
+ int for_part);
+static int __blkdev_put(struct block_device *bdev, int for_part);
- mutex_lock_nested(&bdev->bd_mutex, subclass);
- lock_kernel();
- if (!--bdev->bd_openers) {
- sync_blockdev(bdev);
- kill_bdev(bdev);
- }
- if (bdev->bd_contains == bdev) {
- if (disk->fops->release)
- ret = disk->fops->release(bd_inode, NULL);
- } else {
- mutex_lock_nested(&bdev->bd_contains->bd_mutex,
- subclass + 1);
- bdev->bd_contains->bd_part_count--;
- mutex_unlock(&bdev->bd_contains->bd_mutex);
- }
- if (!bdev->bd_openers) {
- struct module *owner = disk->fops->owner;
-
- put_disk(disk);
- module_put(owner);
-
- if (bdev->bd_contains != bdev) {
- kobject_put(&bdev->bd_part->kobj);
- bdev->bd_part = NULL;
- }
- bdev->bd_disk = NULL;
- bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info;
- if (bdev != bdev->bd_contains)
- __blkdev_put(bdev->bd_contains, subclass + 1);
- bdev->bd_contains = NULL;
- }
- unlock_kernel();
- mutex_unlock(&bdev->bd_mutex);
- bdput(bdev);
- return ret;
-}
-
-int blkdev_put(struct block_device *bdev)
-{
- return __blkdev_put(bdev, BD_MUTEX_NORMAL);
-}
-EXPORT_SYMBOL(blkdev_put);
-
-int blkdev_put_partition(struct block_device *bdev)
-{
- return __blkdev_put(bdev, BD_MUTEX_PARTITION);
-}
-EXPORT_SYMBOL(blkdev_put_partition);
-
-static int
-blkdev_get_whole(struct block_device *bdev, mode_t mode, unsigned flags);
-
-static int
-do_open(struct block_device *bdev, struct file *file, unsigned int subclass)
+static int do_open(struct block_device *bdev, struct file *file, int for_part)
{
struct module *owner = NULL;
struct gendisk *disk;
}
owner = disk->fops->owner;
- mutex_lock_nested(&bdev->bd_mutex, subclass);
-
+ mutex_lock_nested(&bdev->bd_mutex, for_part);
if (!bdev->bd_openers) {
bdev->bd_disk = disk;
bdev->bd_contains = bdev;
ret = -ENOMEM;
if (!whole)
goto out_first;
- ret = blkdev_get_whole(whole, file->f_mode, file->f_flags);
+ BUG_ON(for_part);
+ ret = __blkdev_get(whole, file->f_mode, file->f_flags, 1);
if (ret)
goto out_first;
bdev->bd_contains = whole;
- mutex_lock_nested(&whole->bd_mutex, BD_MUTEX_WHOLE);
- whole->bd_part_count++;
p = disk->part[part - 1];
bdev->bd_inode->i_data.backing_dev_info =
whole->bd_inode->i_data.backing_dev_info;
if (!(disk->flags & GENHD_FL_UP) || !p || !p->nr_sects) {
- whole->bd_part_count--;
- mutex_unlock(&whole->bd_mutex);
ret = -ENXIO;
goto out_first;
}
kobject_get(&p->kobj);
bdev->bd_part = p;
bd_set_size(bdev, (loff_t) p->nr_sects << 9);
- mutex_unlock(&whole->bd_mutex);
}
} else {
put_disk(disk);
}
if (bdev->bd_invalidated)
rescan_partitions(bdev->bd_disk, bdev);
- } else {
- mutex_lock_nested(&bdev->bd_contains->bd_mutex,
- BD_MUTEX_WHOLE);
- bdev->bd_contains->bd_part_count++;
- mutex_unlock(&bdev->bd_contains->bd_mutex);
}
}
bdev->bd_openers++;
+ if (for_part)
+ bdev->bd_part_count++;
mutex_unlock(&bdev->bd_mutex);
unlock_kernel();
return 0;
bdev->bd_disk = NULL;
bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info;
if (bdev != bdev->bd_contains)
- __blkdev_put(bdev->bd_contains, BD_MUTEX_WHOLE);
+ __blkdev_put(bdev->bd_contains, 1);
bdev->bd_contains = NULL;
put_disk(disk);
module_put(owner);
return ret;
}
-int blkdev_get(struct block_device *bdev, mode_t mode, unsigned flags)
+static int __blkdev_get(struct block_device *bdev, mode_t mode, unsigned flags,
+ int for_part)
{
/*
* This crockload is due to bad choice of ->open() type.
struct dentry fake_dentry = {};
fake_file.f_mode = mode;
fake_file.f_flags = flags;
- fake_file.f_dentry = &fake_dentry;
+ fake_file.f_path.dentry = &fake_dentry;
fake_dentry.d_inode = bdev->bd_inode;
- return do_open(bdev, &fake_file, BD_MUTEX_NORMAL);
+ return do_open(bdev, &fake_file, for_part);
}
-EXPORT_SYMBOL(blkdev_get);
-
-static int
-blkdev_get_whole(struct block_device *bdev, mode_t mode, unsigned flags)
-{
- /*
- * This crockload is due to bad choice of ->open() type.
- * It will go away.
- * For now, block device ->open() routine must _not_
- * examine anything in 'inode' argument except ->i_rdev.
- */
- struct file fake_file = {};
- struct dentry fake_dentry = {};
- fake_file.f_mode = mode;
- fake_file.f_flags = flags;
- fake_file.f_dentry = &fake_dentry;
- fake_dentry.d_inode = bdev->bd_inode;
-
- return do_open(bdev, &fake_file, BD_MUTEX_WHOLE);
-}
-
-static int
-blkdev_get_partition(struct block_device *bdev, mode_t mode, unsigned flags)
+int blkdev_get(struct block_device *bdev, mode_t mode, unsigned flags)
{
- /*
- * This crockload is due to bad choice of ->open() type.
- * It will go away.
- * For now, block device ->open() routine must _not_
- * examine anything in 'inode' argument except ->i_rdev.
- */
- struct file fake_file = {};
- struct dentry fake_dentry = {};
- fake_file.f_mode = mode;
- fake_file.f_flags = flags;
- fake_file.f_dentry = &fake_dentry;
- fake_dentry.d_inode = bdev->bd_inode;
-
- return do_open(bdev, &fake_file, BD_MUTEX_PARTITION);
+ return __blkdev_get(bdev, mode, flags, 0);
}
+EXPORT_SYMBOL(blkdev_get);
static int blkdev_open(struct inode * inode, struct file * filp)
{
if (bdev == NULL)
return -ENOMEM;
- res = do_open(bdev, filp, BD_MUTEX_NORMAL);
+ res = do_open(bdev, filp, 0);
if (res)
return res;
return res;
}
+static int __blkdev_put(struct block_device *bdev, int for_part)
+{
+ int ret = 0;
+ struct inode *bd_inode = bdev->bd_inode;
+ struct gendisk *disk = bdev->bd_disk;
+ struct block_device *victim = NULL;
+
+ mutex_lock_nested(&bdev->bd_mutex, for_part);
+ lock_kernel();
+ if (for_part)
+ bdev->bd_part_count--;
+
+ if (!--bdev->bd_openers) {
+ sync_blockdev(bdev);
+ kill_bdev(bdev);
+ }
+ if (bdev->bd_contains == bdev) {
+ if (disk->fops->release)
+ ret = disk->fops->release(bd_inode, NULL);
+ }
+ if (!bdev->bd_openers) {
+ struct module *owner = disk->fops->owner;
+
+ put_disk(disk);
+ module_put(owner);
+
+ if (bdev->bd_contains != bdev) {
+ kobject_put(&bdev->bd_part->kobj);
+ bdev->bd_part = NULL;
+ }
+ bdev->bd_disk = NULL;
+ bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info;
+ if (bdev != bdev->bd_contains)
+ victim = bdev->bd_contains;
+ bdev->bd_contains = NULL;
+ }
+ unlock_kernel();
+ mutex_unlock(&bdev->bd_mutex);
+ bdput(bdev);
+ if (victim)
+ __blkdev_put(victim, 1);
+ return ret;
+}
+
+int blkdev_put(struct block_device *bdev)
+{
+ return __blkdev_put(bdev, 0);
+}
+EXPORT_SYMBOL(blkdev_put);
+
static int blkdev_close(struct inode * inode, struct file * filp)
{
struct block_device *bdev = I_BDEV(filp->f_mapping->host);
#include <linux/hash.h>
#include <linux/suspend.h>
#include <linux/buffer_head.h>
+#include <linux/task_io_accounting_ops.h>
#include <linux/bio.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
}
spin_unlock(&mapping->private_lock);
- if (!TestSetPageDirty(page)) {
- write_lock_irq(&mapping->tree_lock);
- if (page->mapping) { /* Race with truncate? */
- if (mapping_cap_account_dirty(mapping))
- __inc_zone_page_state(page, NR_FILE_DIRTY);
- radix_tree_tag_set(&mapping->page_tree,
- page_index(page),
- PAGECACHE_TAG_DIRTY);
+ if (TestSetPageDirty(page))
+ return 0;
+
+ write_lock_irq(&mapping->tree_lock);
+ if (page->mapping) { /* Race with truncate? */
+ if (mapping_cap_account_dirty(mapping)) {
+ __inc_zone_page_state(page, NR_FILE_DIRTY);
+ task_io_account_write(PAGE_CACHE_SIZE);
}
- write_unlock_irq(&mapping->tree_lock);
- __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
- return 1;
+ radix_tree_tag_set(&mapping->page_tree,
+ page_index(page), PAGECACHE_TAG_DIRTY);
}
- return 0;
+ write_unlock_irq(&mapping->tree_lock);
+ __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
+ return 1;
}
EXPORT_SYMBOL(__set_page_dirty_buffers);
* could encounter a non-uptodate page, which is unresolvable.
* This only applies in the rare case where try_to_free_buffers
* succeeds but the page is not freed.
+ *
+ * Also, during truncate, discard_buffer will have marked all
+ * the page's buffers clean. We discover that here and clean
+ * the page also.
*/
- clear_page_dirty(page);
+ if (test_clear_page_dirty(page))
+ task_io_account_cancelled_write(PAGE_CACHE_SIZE);
}
out:
if (buffers_to_free) {
EINVAL on readdir when filldir fails due to overwritten blocksize
(fixes FC problem). Return error in rename 2nd attempt retry (ie report
if rename by handle also fails, after rename by path fails, we were
-not reporting whether the retry worked or not).
+not reporting whether the retry worked or not). Fix NTLMv2 to
+work to Windows servers (mount with option "sec=ntlmv2").
Version 1.45
------------
buf->time = cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
get_random_bytes(&buf->client_chal, sizeof(buf->client_chal));
buf->reserved2 = 0;
- buf->names[0].type = 0;
+ buf->names[0].type = cpu_to_le16(NTLMSSP_DOMAIN_TYPE);
buf->names[0].length = 0;
+ buf->names[1].type = 0;
+ buf->names[1].length = 0;
/* calculate buf->ntlmv2_hash */
rc = calc_ntlmv2_hash(ses, nls_cp);
static ssize_t cifs_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
- struct inode *inode = iocb->ki_filp->f_dentry->d_inode;
+ struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
ssize_t written;
written = generic_file_aio_write(iocb, iov, nr_segs, pos);
{
/* origin == SEEK_END => we must revalidate the cached file length */
if (origin == SEEK_END) {
- int retval = cifs_revalidate(file->f_dentry);
+ int retval = cifs_revalidate(file->f_path.dentry);
if (retval < 0)
return (loff_t)retval;
}
/* format of NLTMv2 Response ie "case sensitive password" hash when NTLMv2 */
+#define NTLMSSP_SERVER_TYPE 1
+#define NTLMSSP_DOMAIN_TYPE 2
+#define NTLMSSP_FQ_DOMAIN_TYPE 3
+#define NTLMSSP_DNS_DOMAIN_TYPE 4
+#define NTLMSSP_DNS_PARENT_TYPE 5
+
struct ntlmssp2_name {
__le16 type;
__le16 length;
__le64 time;
__u64 client_chal; /* random */
__u32 reserved2;
- struct ntlmssp2_name names[1];
+ struct ntlmssp2_name names[2];
/* array of name entries could follow ending in minimum 4 byte struct */
} __attribute__((packed));
} else {
/* Add file to outstanding requests */
/* BB change to kmem cache alloc */
- dnotify_req = (struct dir_notify_req *) kmalloc(
+ dnotify_req = kmalloc(
sizeof(struct dir_notify_req),
GFP_KERNEL);
if(dnotify_req) {
return 0;
xid = GetXid();
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
pTcon = cifs_sb->tcon;
- full_path = build_path_from_dentry(file->f_dentry);
+ full_path = build_path_from_dentry(file->f_path.dentry);
if(full_path == NULL) {
rc = -ENOMEM;
#include <linux/pagevec.h>
#include <linux/smp_lock.h>
#include <linux/writeback.h>
+#include <linux/task_io_accounting_ops.h>
#include <linux/delay.h>
#include <asm/div64.h>
#include "cifsfs.h"
/* if not oplocked, invalidate inode pages if mtime or file
size changed */
temp = cifs_NTtimeToUnix(le64_to_cpu(buf->LastWriteTime));
- if (timespec_equal(&file->f_dentry->d_inode->i_mtime, &temp) &&
- (file->f_dentry->d_inode->i_size ==
+ if (timespec_equal(&file->f_path.dentry->d_inode->i_mtime, &temp) &&
+ (file->f_path.dentry->d_inode->i_size ==
(loff_t)le64_to_cpu(buf->EndOfFile))) {
cFYI(1, ("inode unchanged on server"));
} else {
- if (file->f_dentry->d_inode->i_mapping) {
+ if (file->f_path.dentry->d_inode->i_mapping) {
/* BB no need to lock inode until after invalidate
since namei code should already have it locked? */
- filemap_write_and_wait(file->f_dentry->d_inode->i_mapping);
+ filemap_write_and_wait(file->f_path.dentry->d_inode->i_mapping);
}
cFYI(1, ("invalidating remote inode since open detected it "
"changed"));
- invalidate_remote_inode(file->f_dentry->d_inode);
+ invalidate_remote_inode(file->f_path.dentry->d_inode);
}
client_can_cache:
if (pTcon->ses->capabilities & CAP_UNIX)
- rc = cifs_get_inode_info_unix(&file->f_dentry->d_inode,
+ rc = cifs_get_inode_info_unix(&file->f_path.dentry->d_inode,
full_path, inode->i_sb, xid);
else
- rc = cifs_get_inode_info(&file->f_dentry->d_inode,
+ rc = cifs_get_inode_info(&file->f_path.dentry->d_inode,
full_path, buf, inode->i_sb, xid);
if ((*oplock & 0xF) == OPLOCK_EXCLUSIVE) {
pCifsInode->clientCanCacheAll = TRUE;
pCifsInode->clientCanCacheRead = TRUE;
cFYI(1, ("Exclusive Oplock granted on inode %p",
- file->f_dentry->d_inode));
+ file->f_path.dentry->d_inode));
} else if ((*oplock & 0xF) == OPLOCK_READ)
pCifsInode->clientCanCacheRead = TRUE;
if (file->f_flags & O_CREAT) {
/* search inode for this file and fill in file->private_data */
- pCifsInode = CIFS_I(file->f_dentry->d_inode);
+ pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
read_lock(&GlobalSMBSeslock);
list_for_each(tmp, &pCifsInode->openFileList) {
pCifsFile = list_entry(tmp, struct cifsFileInfo,
}
}
- full_path = build_path_from_dentry(file->f_dentry);
+ full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
FreeXid(xid);
return -ENOMEM;
write_lock(&GlobalSMBSeslock);
list_add(&pCifsFile->tlist, &pTcon->openFileList);
- pCifsInode = CIFS_I(file->f_dentry->d_inode);
+ pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
if (pCifsInode) {
rc = cifs_open_inode_helper(inode, file, pCifsInode,
pCifsFile, pTcon,
return 0;
}
- if (file->f_dentry == NULL) {
+ if (file->f_path.dentry == NULL) {
up(&pCifsFile->fh_sem);
cFYI(1, ("failed file reopen, no valid name if dentry freed"));
FreeXid(xid);
those that already have the rename sem can end up causing writepage
to get called and if the server was down that means we end up here,
and we can never tell if the caller already has the rename_sem */
- full_path = build_path_from_dentry(file->f_dentry);
+ full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
up(&pCifsFile->fh_sem);
FreeXid(xid);
pCifsInode->clientCanCacheAll = TRUE;
pCifsInode->clientCanCacheRead = TRUE;
cFYI(1, ("Exclusive Oplock granted on inode %p",
- file->f_dentry->d_inode));
+ file->f_path.dentry->d_inode));
} else if ((oplock & 0xF) == OPLOCK_READ) {
pCifsInode->clientCanCacheRead = TRUE;
pCifsInode->clientCanCacheAll = FALSE;
if (pCFileStruct) {
struct cifsTconInfo *pTcon;
- struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
pTcon = cifs_sb->tcon;
} else
cFYI(1, ("Unknown type of lock"));
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
pTcon = cifs_sb->tcon;
if (file->private_data == NULL) {
int xid, long_op;
struct cifsFileInfo *open_file;
- if (file->f_dentry == NULL)
+ if (file->f_path.dentry == NULL)
return -EBADF;
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
if (cifs_sb == NULL)
return -EBADF;
/* cFYI(1,
(" write %d bytes to offset %lld of %s", write_size,
- *poffset, file->f_dentry->d_name.name)); */
+ *poffset, file->f_path.dentry->d_name.name)); */
if (file->private_data == NULL)
return -EBADF;
open_file = (struct cifsFileInfo *) file->private_data;
xid = GetXid();
- if (file->f_dentry->d_inode == NULL) {
+ if (file->f_path.dentry->d_inode == NULL) {
FreeXid(xid);
return -EBADF;
}
- if (*poffset > file->f_dentry->d_inode->i_size)
+ if (*poffset > file->f_path.dentry->d_inode->i_size)
long_op = 2; /* writes past end of file can take a long time */
else
long_op = 1;
return -EBADF;
}
if (open_file->invalidHandle) {
- if ((file->f_dentry == NULL) ||
- (file->f_dentry->d_inode == NULL)) {
+ if ((file->f_path.dentry == NULL) ||
+ (file->f_path.dentry->d_inode == NULL)) {
FreeXid(xid);
return total_written;
}
filemap_fdatawait from here so tell
reopen_file not to flush data to server
now */
- rc = cifs_reopen_file(file->f_dentry->d_inode,
+ rc = cifs_reopen_file(file->f_path.dentry->d_inode,
file, FALSE);
if (rc != 0)
break;
cifs_stats_bytes_written(pTcon, total_written);
/* since the write may have blocked check these pointers again */
- if (file->f_dentry) {
- if (file->f_dentry->d_inode) {
- struct inode *inode = file->f_dentry->d_inode;
+ if (file->f_path.dentry) {
+ if (file->f_path.dentry->d_inode) {
+ struct inode *inode = file->f_path.dentry->d_inode;
inode->i_ctime = inode->i_mtime =
current_fs_time(inode->i_sb);
if (total_written > 0) {
- if (*poffset > file->f_dentry->d_inode->i_size)
- i_size_write(file->f_dentry->d_inode,
+ if (*poffset > file->f_path.dentry->d_inode->i_size)
+ i_size_write(file->f_path.dentry->d_inode,
*poffset);
}
- mark_inode_dirty_sync(file->f_dentry->d_inode);
+ mark_inode_dirty_sync(file->f_path.dentry->d_inode);
}
}
FreeXid(xid);
int xid, long_op;
struct cifsFileInfo *open_file;
- if (file->f_dentry == NULL)
+ if (file->f_path.dentry == NULL)
return -EBADF;
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
if (cifs_sb == NULL)
return -EBADF;
pTcon = cifs_sb->tcon;
cFYI(1,("write %zd bytes to offset %lld of %s", write_size,
- *poffset, file->f_dentry->d_name.name));
+ *poffset, file->f_path.dentry->d_name.name));
if (file->private_data == NULL)
return -EBADF;
open_file = (struct cifsFileInfo *)file->private_data;
xid = GetXid();
- if (file->f_dentry->d_inode == NULL) {
+ if (file->f_path.dentry->d_inode == NULL) {
FreeXid(xid);
return -EBADF;
}
- if (*poffset > file->f_dentry->d_inode->i_size)
+ if (*poffset > file->f_path.dentry->d_inode->i_size)
long_op = 2; /* writes past end of file can take a long time */
else
long_op = 1;
return -EBADF;
}
if (open_file->invalidHandle) {
- if ((file->f_dentry == NULL) ||
- (file->f_dentry->d_inode == NULL)) {
+ if ((file->f_path.dentry == NULL) ||
+ (file->f_path.dentry->d_inode == NULL)) {
FreeXid(xid);
return total_written;
}
filemap_fdatawait from here so tell
reopen_file not to flush data to
server now */
- rc = cifs_reopen_file(file->f_dentry->d_inode,
+ rc = cifs_reopen_file(file->f_path.dentry->d_inode,
file, FALSE);
if (rc != 0)
break;
cifs_stats_bytes_written(pTcon, total_written);
/* since the write may have blocked check these pointers again */
- if (file->f_dentry) {
- if (file->f_dentry->d_inode) {
- file->f_dentry->d_inode->i_ctime =
- file->f_dentry->d_inode->i_mtime = CURRENT_TIME;
+ if (file->f_path.dentry) {
+ if (file->f_path.dentry->d_inode) {
+ file->f_path.dentry->d_inode->i_ctime =
+ file->f_path.dentry->d_inode->i_mtime = CURRENT_TIME;
if (total_written > 0) {
- if (*poffset > file->f_dentry->d_inode->i_size)
- i_size_write(file->f_dentry->d_inode,
+ if (*poffset > file->f_path.dentry->d_inode->i_size)
+ i_size_write(file->f_path.dentry->d_inode,
*poffset);
}
- mark_inode_dirty_sync(file->f_dentry->d_inode);
+ mark_inode_dirty_sync(file->f_path.dentry->d_inode);
}
}
FreeXid(xid);
if ((open_file->invalidHandle) &&
(!open_file->closePend)) {
rc = cifs_reopen_file(
- file->f_dentry->d_inode, file);
+ file->f_path.dentry->d_inode, file);
if (rc != 0)
break;
}
{
int xid;
int rc = 0;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
xid = GetXid();
*/
int cifs_flush(struct file *file, fl_owner_t id)
{
- struct inode * inode = file->f_dentry->d_inode;
+ struct inode * inode = file->f_path.dentry->d_inode;
int rc = 0;
/* Rather than do the steps manually:
struct smb_com_read_rsp *pSMBr;
xid = GetXid();
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
pTcon = cifs_sb->tcon;
if (file->private_data == NULL) {
int buf_type = CIFS_NO_BUFFER;
if ((open_file->invalidHandle) &&
(!open_file->closePend)) {
- rc = cifs_reopen_file(file->f_dentry->d_inode,
+ rc = cifs_reopen_file(file->f_path.dentry->d_inode,
file, TRUE);
if (rc != 0)
break;
int buf_type = CIFS_NO_BUFFER;
xid = GetXid();
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
pTcon = cifs_sb->tcon;
if (file->private_data == NULL) {
while (rc == -EAGAIN) {
if ((open_file->invalidHandle) &&
(!open_file->closePend)) {
- rc = cifs_reopen_file(file->f_dentry->d_inode,
+ rc = cifs_reopen_file(file->f_path.dentry->d_inode,
file, TRUE);
if (rc != 0)
break;
int cifs_file_mmap(struct file *file, struct vm_area_struct *vma)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
int rc, xid;
xid = GetXid();
return -EBADF;
}
open_file = (struct cifsFileInfo *)file->private_data;
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
pTcon = cifs_sb->tcon;
pagevec_init(&lru_pvec, 0);
while (rc == -EAGAIN) {
if ((open_file->invalidHandle) &&
(!open_file->closePend)) {
- rc = cifs_reopen_file(file->f_dentry->d_inode,
+ rc = cifs_reopen_file(file->f_path.dentry->d_inode,
file, TRUE);
if (rc != 0)
break;
cFYI(1, ("Read error in readpages: %d", rc));
break;
} else if (bytes_read > 0) {
+ task_io_account_read(bytes_read);
pSMBr = (struct smb_com_read_rsp *)smb_read_data;
cifs_copy_cache_pages(mapping, page_list, bytes_read,
smb_read_data + 4 /* RFC1001 hdr */ +
else
cFYI(1, ("Bytes read %d",rc));
- file->f_dentry->d_inode->i_atime =
- current_fs_time(file->f_dentry->d_inode->i_sb);
+ file->f_path.dentry->d_inode->i_atime =
+ current_fs_time(file->f_path.dentry->d_inode->i_sb);
if (PAGE_CACHE_SIZE > rc)
memset(read_data + rc, 0, PAGE_CACHE_SIZE - rc);
int rc = 0;
cFYI(1, ("For %s", qstring->name));
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
pTcon = cifs_sb->tcon;
qstring->hash = full_name_hash(qstring->name, qstring->len);
- tmp_dentry = d_lookup(file->f_dentry, qstring);
+ tmp_dentry = d_lookup(file->f_path.dentry, qstring);
if (tmp_dentry) {
cFYI(0, ("existing dentry with inode 0x%p", tmp_dentry->d_inode));
*ptmp_inode = tmp_dentry->d_inode;
/* BB overwrite old name? i.e. tmp_dentry->d_name and tmp_dentry->d_name.len??*/
if(*ptmp_inode == NULL) {
- *ptmp_inode = new_inode(file->f_dentry->d_sb);
+ *ptmp_inode = new_inode(file->f_path.dentry->d_sb);
if(*ptmp_inode == NULL)
return rc;
rc = 1;
}
} else {
- tmp_dentry = d_alloc(file->f_dentry, qstring);
+ tmp_dentry = d_alloc(file->f_path.dentry, qstring);
if(tmp_dentry == NULL) {
cERROR(1,("Failed allocating dentry"));
*ptmp_inode = NULL;
return rc;
}
- *ptmp_inode = new_inode(file->f_dentry->d_sb);
+ *ptmp_inode = new_inode(file->f_path.dentry->d_sb);
if (pTcon->nocase)
tmp_dentry->d_op = &cifs_ci_dentry_ops;
else
cifsFile->invalidHandle = TRUE;
cifsFile->srch_inf.endOfSearch = FALSE;
- if(file->f_dentry == NULL)
+ if(file->f_path.dentry == NULL)
return -ENOENT;
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
if(cifs_sb == NULL)
return -EINVAL;
if(pTcon == NULL)
return -EINVAL;
- full_path = build_path_from_dentry(file->f_dentry);
+ full_path = build_path_from_dentry(file->f_path.dentry);
if(full_path == NULL) {
return -ENOMEM;
struct inode * inode;
struct cifsInodeInfo *cifsInfo;
- if(file->f_dentry == NULL)
+ if(file->f_path.dentry == NULL)
return 0;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if(inode == NULL)
return 0;
if((scratch_buf == NULL) || (pfindEntry == NULL) || (pCifsF == NULL))
return -ENOENT;
- if(file->f_dentry == NULL)
+ if(file->f_path.dentry == NULL)
return -ENOENT;
rc = cifs_entry_is_dot(pfindEntry,pCifsF);
if(rc != 0)
return 0;
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
qstring.name = scratch_buf;
rc = cifs_get_name_from_search_buf(&qstring,pfindEntry,
xid = GetXid();
- if(file->f_dentry == NULL) {
+ if(file->f_path.dentry == NULL) {
FreeXid(xid);
return -EIO;
}
- cifs_sb = CIFS_SB(file->f_dentry->d_sb);
+ cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
pTcon = cifs_sb->tcon;
if(pTcon == NULL)
return -EINVAL;
switch ((int) file->f_pos) {
case 0:
if (filldir(direntry, ".", 1, file->f_pos,
- file->f_dentry->d_inode->i_ino, DT_DIR) < 0) {
+ file->f_path.dentry->d_inode->i_ino, DT_DIR) < 0) {
cERROR(1, ("Filldir for current dir failed"));
rc = -ENOMEM;
break;
file->f_pos++;
case 1:
if (filldir(direntry, "..", 2, file->f_pos,
- file->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
+ file->f_path.dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
cERROR(1, ("Filldir for parent dir failed"));
rc = -ENOMEM;
break;
/* file operations for directories */
int coda_readdir(struct file *coda_file, void *dirent, filldir_t filldir)
{
- struct dentry *coda_dentry = coda_file->f_dentry;
+ struct dentry *coda_dentry = coda_file->f_path.dentry;
struct coda_file_info *cfi;
struct file *host_file;
struct inode *host_inode;
coda_vfs_stat.readdir++;
- host_inode = host_file->f_dentry->d_inode;
+ host_inode = host_file->f_path.dentry->d_inode;
mutex_lock(&host_inode->i_mutex);
host_file->f_pos = coda_file->f_pos;
/* catch truncated reads */
if (ret < vdir_size || ret < vdir_size + vdir->d_namlen) {
printk("coda_venus_readdir: short read: %ld\n",
- filp->f_dentry->d_inode->i_ino);
+ filp->f_path.dentry->d_inode->i_ino);
ret = -EBADF;
break;
}
/* validate whether the directory file actually makes sense */
if (vdir->d_reclen < vdir_size + vdir->d_namlen) {
printk("coda_venus_readdir: Invalid dir: %ld\n",
- filp->f_dentry->d_inode->i_ino);
+ filp->f_path.dentry->d_inode->i_ino);
ret = -EBADF;
break;
}
static ssize_t
coda_file_write(struct file *coda_file, const char __user *buf, size_t count, loff_t *ppos)
{
- struct inode *host_inode, *coda_inode = coda_file->f_dentry->d_inode;
+ struct inode *host_inode, *coda_inode = coda_file->f_path.dentry->d_inode;
struct coda_file_info *cfi;
struct file *host_file;
ssize_t ret;
if (!host_file->f_op || !host_file->f_op->write)
return -EINVAL;
- host_inode = host_file->f_dentry->d_inode;
+ host_inode = host_file->f_path.dentry->d_inode;
mutex_lock(&coda_inode->i_mutex);
ret = host_file->f_op->write(host_file, buf, count, ppos);
if (!host_file->f_op || !host_file->f_op->mmap)
return -ENODEV;
- coda_inode = coda_file->f_dentry->d_inode;
- host_inode = host_file->f_dentry->d_inode;
+ coda_inode = coda_file->f_path.dentry->d_inode;
+ host_inode = host_file->f_path.dentry->d_inode;
coda_file->f_mapping = host_file->f_mapping;
if (coda_inode->i_mapping == &coda_inode->i_data)
coda_inode->i_mapping = host_inode->i_mapping;
cfi = CODA_FTOC(coda_file);
BUG_ON(!cfi || cfi->cfi_magic != CODA_MAGIC);
- coda_inode = coda_file->f_dentry->d_inode;
+ coda_inode = coda_file->f_path.dentry->d_inode;
err = venus_store(coda_inode->i_sb, coda_i2f(coda_inode), coda_flags,
coda_file->f_uid);
err = venus_close(coda_inode->i_sb, coda_i2f(coda_inode),
coda_flags, coda_file->f_uid);
- host_inode = cfi->cfi_container->f_dentry->d_inode;
+ host_inode = cfi->cfi_container->f_path.dentry->d_inode;
cii = ITOC(coda_inode);
/* did we mmap this file? */
coda_vfs_stat.fsync++;
if (host_file->f_op && host_file->f_op->fsync) {
- host_dentry = host_file->f_dentry;
+ host_dentry = host_file->f_path.dentry;
host_inode = host_dentry->d_inode;
mutex_lock(&host_inode->i_mutex);
err = host_file->f_op->fsync(host_file, host_dentry, datasync);
file = fget(data->fd);
inode = NULL;
if(file)
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if(!inode || !S_ISCHR(inode->i_mode) ||
imajor(inode) != CODA_PSDEV_MAJOR) {
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs(file->f_dentry, &tmp);
+ error = vfs_statfs(file->f_path.dentry, &tmp);
if (!error)
error = put_compat_statfs(buf, &tmp);
fput(file);
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs(file->f_dentry, &tmp);
+ error = vfs_statfs(file->f_path.dentry, &tmp);
if (!error)
error = put_compat_statfs64(buf, &tmp);
fput(file);
/* find the name of the device. */
path = (char *)__get_free_page(GFP_KERNEL);
if (path) {
- fn = d_path(filp->f_dentry, filp->f_vfsmnt, path, PAGE_SIZE);
+ fn = d_path(filp->f_path.dentry, filp->f_path.mnt, path, PAGE_SIZE);
if (IS_ERR(fn))
fn = "?";
}
case FIBMAP:
case FIGETBSZ:
case FIONREAD:
- if (S_ISREG(filp->f_dentry->d_inode->i_mode))
+ if (S_ISREG(filp->f_path.dentry->d_inode->i_mode))
break;
/*FALL THROUGH*/
goto found_handler;
}
- if (S_ISSOCK(filp->f_dentry->d_inode->i_mode) &&
+ if (S_ISSOCK(filp->f_path.dentry->d_inode->i_mode) &&
cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
error = siocdevprivate_ioctl(fd, cmd, arg);
} else {
if (iov != iovstack)
kfree(iov);
if ((ret + (type == READ)) > 0) {
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
if (type == READ)
fsnotify_access(dentry);
else
{
fd_set_bits fds;
char *bits;
- int size, max_fdset, ret = -EINVAL;
+ int size, max_fds, ret = -EINVAL;
struct fdtable *fdt;
if (n < 0)
goto out_nofds;
- /* max_fdset can increase, so grab it once to avoid race */
+ /* max_fds can increase, so grab it once to avoid race */
rcu_read_lock();
fdt = files_fdtable(current->files);
- max_fdset = fdt->max_fdset;
+ max_fds = fdt->max_fds;
rcu_read_unlock();
- if (n > max_fdset)
- n = max_fdset;
+ if (n > max_fds)
+ n = max_fds;
/*
* We need 6 bitmaps (in/out/ex for both incoming and outgoing),
static int vt_check(struct file *file)
{
struct tty_struct *tty;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
if (file->f_op->ioctl != tty_ioctl)
return -EINVAL;
static int configfs_dir_open(struct inode *inode, struct file *file)
{
- struct dentry * dentry = file->f_dentry;
+ struct dentry * dentry = file->f_path.dentry;
struct configfs_dirent * parent_sd = dentry->d_fsdata;
mutex_lock(&dentry->d_inode->i_mutex);
static int configfs_dir_close(struct inode *inode, struct file *file)
{
- struct dentry * dentry = file->f_dentry;
+ struct dentry * dentry = file->f_path.dentry;
struct configfs_dirent * cursor = file->private_data;
mutex_lock(&dentry->d_inode->i_mutex);
static int configfs_readdir(struct file * filp, void * dirent, filldir_t filldir)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct configfs_dirent * parent_sd = dentry->d_fsdata;
struct configfs_dirent *cursor = filp->private_data;
struct list_head *p, *q = &cursor->s_sibling;
static loff_t configfs_dir_lseek(struct file * file, loff_t offset, int origin)
{
- struct dentry * dentry = file->f_dentry;
+ struct dentry * dentry = file->f_path.dentry;
mutex_lock(&dentry->d_inode->i_mutex);
switch (origin) {
if (offset >= 0)
break;
default:
- mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
return -EINVAL;
}
if (offset != file->f_pos) {
down(&buffer->sem);
if (buffer->needs_read_fill) {
- if ((retval = fill_read_buffer(file->f_dentry,buffer)))
+ if ((retval = fill_read_buffer(file->f_path.dentry,buffer)))
goto out;
}
pr_debug("%s: count = %zd, ppos = %lld, buf = %s\n",
down(&buffer->sem);
len = fill_write_buffer(buffer, buf, count);
if (len > 0)
- len = flush_write_buffer(file->f_dentry, buffer, count);
+ len = flush_write_buffer(file->f_path.dentry, buffer, count);
if (len > 0)
*ppos += len;
up(&buffer->sem);
static int check_perm(struct inode * inode, struct file * file)
{
- struct config_item *item = configfs_get_config_item(file->f_dentry->d_parent);
- struct configfs_attribute * attr = to_attr(file->f_dentry);
+ struct config_item *item = configfs_get_config_item(file->f_path.dentry->d_parent);
+ struct configfs_attribute * attr = to_attr(file->f_path.dentry);
struct configfs_buffer * buffer;
struct configfs_item_operations * ops = NULL;
int error = 0;
static int configfs_release(struct inode * inode, struct file * filp)
{
- struct config_item * item = to_item(filp->f_dentry->d_parent);
- struct configfs_attribute * attr = to_attr(filp->f_dentry);
+ struct config_item * item = to_item(filp->f_path.dentry->d_parent);
+ struct configfs_attribute * attr = to_attr(filp->f_path.dentry);
struct module * owner = attr->ca_owner;
struct configfs_buffer * buffer = filp->private_data;
*/
static int cramfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
char *buf;
unsigned int offset;
#include <linux/kobject.h>
#include <linux/namei.h>
#include <linux/debugfs.h>
+#include <linux/fsnotify.h>
#define DEBUGFS_MAGIC 0x64626720
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
- /* directory inodes start off with i_nlink == 2 (for "." entry) */
+ /* directory inodes start off with i_nlink == 2
+ * (for "." entry) */
inc_nlink(inode);
break;
}
mode = (mode & (S_IRWXUGO | S_ISVTX)) | S_IFDIR;
res = debugfs_mknod(dir, dentry, mode, 0);
- if (!res)
+ if (!res) {
inc_nlink(dir);
+ fsnotify_mkdir(dir, dentry);
+ }
return res;
}
static int debugfs_create(struct inode *dir, struct dentry *dentry, int mode)
{
+ int res;
+
mode = (mode & S_IALLUGO) | S_IFREG;
- return debugfs_mknod(dir, dentry, mode, 0);
+ res = debugfs_mknod(dir, dentry, mode, 0);
+ if (!res)
+ fsnotify_create(dir, dentry);
+ return res;
}
static inline int debugfs_positive(struct dentry *dentry)
* block. A pointer to that is in the struct vfsmount that we
* have around.
*/
- if (!parent ) {
+ if (!parent) {
if (debugfs_mount && debugfs_mount->mnt_sb) {
parent = debugfs_mount->mnt_sb->s_root;
}
error = debugfs_mkdir(parent->d_inode, *dentry, mode);
else
error = debugfs_create(parent->d_inode, *dentry, mode);
+ dput(*dentry);
} else
error = PTR_ERR(*dentry);
mutex_unlock(&parent->d_inode->i_mutex);
pr_debug("debugfs: creating file '%s'\n",name);
- error = simple_pin_fs(&debug_fs_type, &debugfs_mount, &debugfs_mount_count);
+ error = simple_pin_fs(&debug_fs_type, &debugfs_mount,
+ &debugfs_mount_count);
if (error)
goto exit;
error = debugfs_create_by_name(name, mode, parent, &dentry);
if (error) {
dentry = NULL;
+ simple_release_fs(&debugfs_mount, &debugfs_mount_count);
goto exit;
}
void debugfs_remove(struct dentry *dentry)
{
struct dentry *parent;
+ int ret = 0;
if (!dentry)
return;
mutex_lock(&parent->d_inode->i_mutex);
if (debugfs_positive(dentry)) {
if (dentry->d_inode) {
- if (S_ISDIR(dentry->d_inode->i_mode))
- simple_rmdir(parent->d_inode, dentry);
- else
+ dget(dentry);
+ if (S_ISDIR(dentry->d_inode->i_mode)) {
+ ret = simple_rmdir(parent->d_inode, dentry);
+ if (ret)
+ printk(KERN_ERR
+ "DebugFS rmdir on %s failed : "
+ "directory not empty.\n",
+ dentry->d_name.name);
+ } else
simple_unlink(parent->d_inode, dentry);
- dput(dentry);
+ if (!ret)
+ d_delete(dentry);
+ dput(dentry);
}
}
mutex_unlock(&parent->d_inode->i_mutex);
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
+#include <linux/task_io_accounting_ops.h>
#include <linux/bio.h>
#include <linux/wait.h>
#include <linux/err.h>
/* BIO completion state */
spinlock_t bio_lock; /* protects BIO fields below */
- int bio_count; /* nr bios to be completed */
- int bios_in_flight; /* nr bios in flight */
+ unsigned long refcount; /* direct_io_worker() and bios */
struct bio *bio_list; /* singly linked via bi_private */
struct task_struct *waiter; /* waiting task (NULL if none) */
return dio->pages[dio->head++];
}
-/*
- * Called when all DIO BIO I/O has been completed - let the filesystem
- * know, if it registered an interest earlier via get_block. Pass the
- * private field of the map buffer_head so that filesystems can use it
- * to hold additional state between get_block calls and dio_complete.
- */
-static void dio_complete(struct dio *dio, loff_t offset, ssize_t bytes)
-{
- if (dio->end_io && dio->result)
- dio->end_io(dio->iocb, offset, bytes, dio->map_bh.b_private);
- if (dio->lock_type == DIO_LOCKING)
- /* lockdep: non-owner release */
- up_read_non_owner(&dio->inode->i_alloc_sem);
-}
-
-/*
- * Called when a BIO has been processed. If the count goes to zero then IO is
- * complete and we can signal this to the AIO layer.
+/**
+ * dio_complete() - called when all DIO BIO I/O has been completed
+ * @offset: the byte offset in the file of the completed operation
+ *
+ * This releases locks as dictated by the locking type, lets interested parties
+ * know that a DIO operation has completed, and calculates the resulting return
+ * code for the operation.
+ *
+ * It lets the filesystem know if it registered an interest earlier via
+ * get_block. Pass the private field of the map buffer_head so that
+ * filesystems can use it to hold additional state between get_block calls and
+ * dio_complete.
*/
-static void finished_one_bio(struct dio *dio)
+static int dio_complete(struct dio *dio, loff_t offset, int ret)
{
- unsigned long flags;
+ ssize_t transferred = 0;
- spin_lock_irqsave(&dio->bio_lock, flags);
- if (dio->bio_count == 1) {
- if (dio->is_async) {
- ssize_t transferred;
- loff_t offset;
-
- /*
- * Last reference to the dio is going away.
- * Drop spinlock and complete the DIO.
- */
- spin_unlock_irqrestore(&dio->bio_lock, flags);
+ /*
+ * AIO submission can race with bio completion to get here while
+ * expecting to have the last io completed by bio completion.
+ * In that case -EIOCBQUEUED is in fact not an error we want
+ * to preserve through this call.
+ */
+ if (ret == -EIOCBQUEUED)
+ ret = 0;
- /* Check for short read case */
- transferred = dio->result;
- offset = dio->iocb->ki_pos;
+ if (dio->result) {
+ transferred = dio->result;
- if ((dio->rw == READ) &&
- ((offset + transferred) > dio->i_size))
- transferred = dio->i_size - offset;
+ /* Check for short read case */
+ if ((dio->rw == READ) && ((offset + transferred) > dio->i_size))
+ transferred = dio->i_size - offset;
+ }
- /* check for error in completion path */
- if (dio->io_error)
- transferred = dio->io_error;
+ if (dio->end_io && dio->result)
+ dio->end_io(dio->iocb, offset, transferred,
+ dio->map_bh.b_private);
+ if (dio->lock_type == DIO_LOCKING)
+ /* lockdep: non-owner release */
+ up_read_non_owner(&dio->inode->i_alloc_sem);
- dio_complete(dio, offset, transferred);
+ if (ret == 0)
+ ret = dio->page_errors;
+ if (ret == 0)
+ ret = dio->io_error;
+ if (ret == 0)
+ ret = transferred;
- /* Complete AIO later if falling back to buffered i/o */
- if (dio->result == dio->size ||
- ((dio->rw == READ) && dio->result)) {
- aio_complete(dio->iocb, transferred, 0);
- kfree(dio);
- return;
- } else {
- /*
- * Falling back to buffered
- */
- spin_lock_irqsave(&dio->bio_lock, flags);
- dio->bio_count--;
- if (dio->waiter)
- wake_up_process(dio->waiter);
- spin_unlock_irqrestore(&dio->bio_lock, flags);
- return;
- }
- }
- }
- dio->bio_count--;
- spin_unlock_irqrestore(&dio->bio_lock, flags);
+ return ret;
}
static int dio_bio_complete(struct dio *dio, struct bio *bio);
static int dio_bio_end_aio(struct bio *bio, unsigned int bytes_done, int error)
{
struct dio *dio = bio->bi_private;
+ unsigned long remaining;
+ unsigned long flags;
if (bio->bi_size)
return 1;
/* cleanup the bio */
dio_bio_complete(dio, bio);
+
+ spin_lock_irqsave(&dio->bio_lock, flags);
+ remaining = --dio->refcount;
+ if (remaining == 1 && dio->waiter)
+ wake_up_process(dio->waiter);
+ spin_unlock_irqrestore(&dio->bio_lock, flags);
+
+ if (remaining == 0) {
+ int ret = dio_complete(dio, dio->iocb->ki_pos, 0);
+ aio_complete(dio->iocb, ret, 0);
+ kfree(dio);
+ }
+
return 0;
}
spin_lock_irqsave(&dio->bio_lock, flags);
bio->bi_private = dio->bio_list;
dio->bio_list = bio;
- dio->bios_in_flight--;
- if (dio->waiter && dio->bios_in_flight == 0)
+ if (--dio->refcount == 1 && dio->waiter)
wake_up_process(dio->waiter);
spin_unlock_irqrestore(&dio->bio_lock, flags);
return 0;
* In the AIO read case we speculatively dirty the pages before starting IO.
* During IO completion, any of these pages which happen to have been written
* back will be redirtied by bio_check_pages_dirty().
+ *
+ * bios hold a dio reference between submit_bio and ->end_io.
*/
static void dio_bio_submit(struct dio *dio)
{
unsigned long flags;
bio->bi_private = dio;
+
spin_lock_irqsave(&dio->bio_lock, flags);
- dio->bio_count++;
- dio->bios_in_flight++;
+ dio->refcount++;
spin_unlock_irqrestore(&dio->bio_lock, flags);
+
if (dio->is_async && dio->rw == READ)
bio_set_pages_dirty(bio);
+
submit_bio(dio->rw, bio);
dio->bio = NULL;
}
/*
- * Wait for the next BIO to complete. Remove it and return it.
+ * Wait for the next BIO to complete. Remove it and return it. NULL is
+ * returned once all BIOs have been completed. This must only be called once
+ * all bios have been issued so that dio->refcount can only decrease. This
+ * requires that that the caller hold a reference on the dio.
*/
static struct bio *dio_await_one(struct dio *dio)
{
unsigned long flags;
- struct bio *bio;
+ struct bio *bio = NULL;
spin_lock_irqsave(&dio->bio_lock, flags);
- while (dio->bio_list == NULL) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- if (dio->bio_list == NULL) {
- dio->waiter = current;
- spin_unlock_irqrestore(&dio->bio_lock, flags);
- blk_run_address_space(dio->inode->i_mapping);
- io_schedule();
- spin_lock_irqsave(&dio->bio_lock, flags);
- dio->waiter = NULL;
- }
- set_current_state(TASK_RUNNING);
+
+ /*
+ * Wait as long as the list is empty and there are bios in flight. bio
+ * completion drops the count, maybe adds to the list, and wakes while
+ * holding the bio_lock so we don't need set_current_state()'s barrier
+ * and can call it after testing our condition.
+ */
+ while (dio->refcount > 1 && dio->bio_list == NULL) {
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ dio->waiter = current;
+ spin_unlock_irqrestore(&dio->bio_lock, flags);
+ io_schedule();
+ /* wake up sets us TASK_RUNNING */
+ spin_lock_irqsave(&dio->bio_lock, flags);
+ dio->waiter = NULL;
+ }
+ if (dio->bio_list) {
+ bio = dio->bio_list;
+ dio->bio_list = bio->bi_private;
}
- bio = dio->bio_list;
- dio->bio_list = bio->bi_private;
spin_unlock_irqrestore(&dio->bio_lock, flags);
return bio;
}
}
bio_put(bio);
}
- finished_one_bio(dio);
return uptodate ? 0 : -EIO;
}
/*
- * Wait on and process all in-flight BIOs.
+ * Wait on and process all in-flight BIOs. This must only be called once
+ * all bios have been issued so that the refcount can only decrease.
+ * This just waits for all bios to make it through dio_bio_complete. IO
+ * errors are propogated through dio->io_error and should be propogated via
+ * dio_complete().
*/
-static int dio_await_completion(struct dio *dio)
+static void dio_await_completion(struct dio *dio)
{
- int ret = 0;
-
- if (dio->bio)
- dio_bio_submit(dio);
-
- /*
- * The bio_lock is not held for the read of bio_count.
- * This is ok since it is the dio_bio_complete() that changes
- * bio_count.
- */
- while (dio->bio_count) {
- struct bio *bio = dio_await_one(dio);
- int ret2;
-
- ret2 = dio_bio_complete(dio, bio);
- if (ret == 0)
- ret = ret2;
- }
- return ret;
+ struct bio *bio;
+ do {
+ bio = dio_await_one(dio);
+ if (bio)
+ dio_bio_complete(dio, bio);
+ } while (bio);
}
/*
{
int ret = 0;
+ if (dio->rw & WRITE) {
+ /*
+ * Read accounting is performed in submit_bio()
+ */
+ task_io_account_write(len);
+ }
+
/*
* Can we just grow the current page's presence in the dio?
*/
struct dio *dio)
{
unsigned long user_addr;
+ unsigned long flags;
int seg;
ssize_t ret = 0;
ssize_t ret2;
dio->iocb = iocb;
dio->i_size = i_size_read(inode);
- /*
- * BIO completion state.
- *
- * ->bio_count starts out at one, and we decrement it to zero after all
- * BIOs are submitted. This to avoid the situation where a really fast
- * (or synchronous) device could take the count to zero while we're
- * still submitting BIOs.
- */
- dio->bio_count = 1;
- dio->bios_in_flight = 0;
spin_lock_init(&dio->bio_lock);
+ dio->refcount = 1;
dio->bio_list = NULL;
dio->waiter = NULL;
if (dio->bio)
dio_bio_submit(dio);
+ /* All IO is now issued, send it on its way */
+ blk_run_address_space(inode->i_mapping);
+
/*
* It is possible that, we return short IO due to end of file.
* In that case, we need to release all the pages we got hold on.
mutex_unlock(&dio->inode->i_mutex);
/*
- * OK, all BIOs are submitted, so we can decrement bio_count to truly
- * reflect the number of to-be-processed BIOs.
+ * The only time we want to leave bios in flight is when a successful
+ * partial aio read or full aio write have been setup. In that case
+ * bio completion will call aio_complete. The only time it's safe to
+ * call aio_complete is when we return -EIOCBQUEUED, so we key on that.
+ * This had *better* be the only place that raises -EIOCBQUEUED.
*/
- if (dio->is_async) {
- int should_wait = 0;
+ BUG_ON(ret == -EIOCBQUEUED);
+ if (dio->is_async && ret == 0 && dio->result &&
+ ((rw & READ) || (dio->result == dio->size)))
+ ret = -EIOCBQUEUED;
- if (dio->result < dio->size && (rw & WRITE)) {
- dio->waiter = current;
- should_wait = 1;
- }
- if (ret == 0)
- ret = dio->result;
- finished_one_bio(dio); /* This can free the dio */
- blk_run_address_space(inode->i_mapping);
- if (should_wait) {
- unsigned long flags;
- /*
- * Wait for already issued I/O to drain out and
- * release its references to user-space pages
- * before returning to fallback on buffered I/O
- */
-
- spin_lock_irqsave(&dio->bio_lock, flags);
- set_current_state(TASK_UNINTERRUPTIBLE);
- while (dio->bio_count) {
- spin_unlock_irqrestore(&dio->bio_lock, flags);
- io_schedule();
- spin_lock_irqsave(&dio->bio_lock, flags);
- set_current_state(TASK_UNINTERRUPTIBLE);
- }
- spin_unlock_irqrestore(&dio->bio_lock, flags);
- set_current_state(TASK_RUNNING);
- kfree(dio);
- }
- } else {
- ssize_t transferred = 0;
-
- finished_one_bio(dio);
- ret2 = dio_await_completion(dio);
- if (ret == 0)
- ret = ret2;
- if (ret == 0)
- ret = dio->page_errors;
- if (dio->result) {
- loff_t i_size = i_size_read(inode);
-
- transferred = dio->result;
- /*
- * Adjust the return value if the read crossed a
- * non-block-aligned EOF.
- */
- if (rw == READ && (offset + transferred > i_size))
- transferred = i_size - offset;
- }
- dio_complete(dio, offset, transferred);
- if (ret == 0)
- ret = transferred;
+ if (ret != -EIOCBQUEUED)
+ dio_await_completion(dio);
- /* We could have also come here on an AIO file extend */
- if (!is_sync_kiocb(iocb) && (rw & WRITE) &&
- ret >= 0 && dio->result == dio->size)
- /*
- * For AIO writes where we have completed the
- * i/o, we have to mark the the aio complete.
- */
- aio_complete(iocb, ret, 0);
+ /*
+ * Sync will always be dropping the final ref and completing the
+ * operation. AIO can if it was a broken operation described above or
+ * in fact if all the bios race to complete before we get here. In
+ * that case dio_complete() translates the EIOCBQUEUED into the proper
+ * return code that the caller will hand to aio_complete().
+ *
+ * This is managed by the bio_lock instead of being an atomic_t so that
+ * completion paths can drop their ref and use the remaining count to
+ * decide to wake the submission path atomically.
+ */
+ spin_lock_irqsave(&dio->bio_lock, flags);
+ ret2 = --dio->refcount;
+ spin_unlock_irqrestore(&dio->bio_lock, flags);
+ BUG_ON(!dio->is_async && ret2 != 0);
+ if (ret2 == 0) {
+ ret = dio_complete(dio, offset, ret);
kfree(dio);
- }
+ } else
+ BUG_ON(ret != -EIOCBQUEUED);
+
return ret;
}
struct dnotify_struct **prev;
struct inode *inode;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
if (!S_ISDIR(inode->i_mode))
return;
spin_lock(&inode->i_lock);
}
if (!dir_notify_enable)
return -EINVAL;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
if (!S_ISDIR(inode->i_mode))
return -ENOTDIR;
dn = kmem_cache_alloc(dn_cache, GFP_KERNEL);
file_list_lock();
list_for_each(p, &sb->s_files) {
struct file *filp = list_entry(p, struct file, f_u.fu_list);
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
if (filp->f_mode & FMODE_WRITE && dqinit_needed(inode, type)) {
- struct dentry *dentry = dget(filp->f_dentry);
+ struct dentry *dentry = dget(filp->f_path.dentry);
file_list_unlock();
sb->dq_op->initialize(inode, type);
dput(dentry);
static void print_warning(struct dquot *dquot, const char warntype)
{
char *msg = NULL;
+ struct tty_struct *tty;
int flag = (warntype == BHARDWARN || warntype == BSOFTLONGWARN) ? DQ_BLKS_B :
((warntype == IHARDWARN || warntype == ISOFTLONGWARN) ? DQ_INODES_B : 0);
return;
mutex_lock(&tty_mutex);
- if (!current->signal->tty)
+ tty = get_current_tty();
+ if (!tty)
goto out_lock;
- tty_write_message(current->signal->tty, dquot->dq_sb->s_id);
+ tty_write_message(tty, dquot->dq_sb->s_id);
if (warntype == ISOFTWARN || warntype == BSOFTWARN)
- tty_write_message(current->signal->tty, ": warning, ");
+ tty_write_message(tty, ": warning, ");
else
- tty_write_message(current->signal->tty, ": write failed, ");
- tty_write_message(current->signal->tty, quotatypes[dquot->dq_type]);
+ tty_write_message(tty, ": write failed, ");
+ tty_write_message(tty, quotatypes[dquot->dq_type]);
switch (warntype) {
case IHARDWARN:
msg = " file limit reached.\r\n";
msg = " block quota exceeded.\r\n";
break;
}
- tty_write_message(current->signal->tty, msg);
+ tty_write_message(tty, msg);
out_lock:
mutex_unlock(&tty_mutex);
}
#include <linux/dcache.h>
#include <linux/namei.h>
#include <linux/mount.h>
+#include <linux/fs_stack.h>
#include "ecryptfs_kernel.h"
/**
struct inode *lower_inode =
ecryptfs_inode_to_lower(dentry->d_inode);
- ecryptfs_copy_attr_all(dentry->d_inode, lower_inode);
+ fsstack_copy_attr_all(dentry->d_inode, lower_inode, NULL);
}
out:
return rc;
#include <keys/user-type.h>
#include <linux/fs.h>
+#include <linux/fs_stack.h>
+#include <linux/namei.h>
#include <linux/scatterlist.h>
/* Version verification for shared data structures w/ userspace */
/* dentry private data. Each dentry must keep track of a lower
* vfsmount too. */
struct ecryptfs_dentry_info {
- struct dentry *wdi_dentry;
- struct vfsmount *lower_mnt;
+ struct path lower_path;
struct ecryptfs_crypt_stat *crypt_stat;
};
static inline struct dentry *
ecryptfs_dentry_to_lower(struct dentry *dentry)
{
- return ((struct ecryptfs_dentry_info *)dentry->d_fsdata)->wdi_dentry;
+ return ((struct ecryptfs_dentry_info *)dentry->d_fsdata)->lower_path.dentry;
}
static inline void
ecryptfs_set_dentry_lower(struct dentry *dentry, struct dentry *lower_dentry)
{
- ((struct ecryptfs_dentry_info *)dentry->d_fsdata)->wdi_dentry =
+ ((struct ecryptfs_dentry_info *)dentry->d_fsdata)->lower_path.dentry =
lower_dentry;
}
static inline struct vfsmount *
ecryptfs_dentry_to_lower_mnt(struct dentry *dentry)
{
- return ((struct ecryptfs_dentry_info *)dentry->d_fsdata)->lower_mnt;
+ return ((struct ecryptfs_dentry_info *)dentry->d_fsdata)->lower_path.mnt;
}
static inline void
ecryptfs_set_dentry_lower_mnt(struct dentry *dentry, struct vfsmount *lower_mnt)
{
- ((struct ecryptfs_dentry_info *)dentry->d_fsdata)->lower_mnt =
+ ((struct ecryptfs_dentry_info *)dentry->d_fsdata)->lower_path.mnt =
lower_mnt;
}
const char *name, int length,
char **encoded_name);
struct dentry *ecryptfs_lower_dentry(struct dentry *this_dentry);
-void ecryptfs_copy_attr_atime(struct inode *dest, const struct inode *src);
-void ecryptfs_copy_attr_all(struct inode *dest, const struct inode *src);
-void ecryptfs_copy_inode_size(struct inode *dst, const struct inode *src);
void ecryptfs_dump_hex(char *data, int bytes);
int virt_to_scatterlist(const void *addr, int size, struct scatterlist *sg,
int sg_size);
#include <linux/security.h>
#include <linux/smp_lock.h>
#include <linux/compat.h>
+#include <linux/fs_stack.h>
#include "ecryptfs_kernel.h"
/**
}
ecryptfs_printk(KERN_DEBUG, "new_end_pos = [0x%.16x]\n", new_end_pos);
if (expanding_file) {
- rc = ecryptfs_truncate(file->f_dentry, new_end_pos);
+ rc = ecryptfs_truncate(file->f_path.dentry, new_end_pos);
if (rc) {
rv = rc;
ecryptfs_printk(KERN_ERR, "Error on attempt to "
if (-EIOCBQUEUED == rc)
rc = wait_on_sync_kiocb(iocb);
if (rc >= 0) {
- lower_dentry = ecryptfs_dentry_to_lower(file->f_dentry);
- lower_vfsmount = ecryptfs_dentry_to_lower_mnt(file->f_dentry);
+ lower_dentry = ecryptfs_dentry_to_lower(file->f_path.dentry);
+ lower_vfsmount = ecryptfs_dentry_to_lower_mnt(file->f_path.dentry);
touch_atime(lower_vfsmount, lower_dentry);
}
return rc;
lower_file = ecryptfs_file_to_lower(file);
lower_file->f_pos = file->f_pos;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
memset(&buf, 0, sizeof(buf));
buf.dirent = dirent;
- buf.dentry = file->f_dentry;
+ buf.dentry = file->f_path.dentry;
buf.filldir = filldir;
retry:
buf.filldir_called = 0;
goto retry;
file->f_pos = lower_file->f_pos;
if (rc >= 0)
- ecryptfs_copy_attr_atime(inode, lower_file->f_dentry->d_inode);
+ fsstack_copy_attr_atime(inode, lower_file->f_path.dentry->d_inode);
return rc;
}
int rc = 0;
struct ecryptfs_crypt_stat *crypt_stat = NULL;
struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
- struct dentry *ecryptfs_dentry = file->f_dentry;
+ struct dentry *ecryptfs_dentry = file->f_path.dentry;
/* Private value of ecryptfs_dentry allocated in
* ecryptfs_lookup() */
struct dentry *lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/crypto.h>
+#include <linux/fs_stack.h>
#include "ecryptfs_kernel.h"
static struct dentry *lock_parent(struct dentry *dentry)
dput(dir);
}
-void ecryptfs_copy_inode_size(struct inode *dst, const struct inode *src)
-{
- i_size_write(dst, i_size_read((struct inode *)src));
- dst->i_blocks = src->i_blocks;
-}
-
-void ecryptfs_copy_attr_atime(struct inode *dest, const struct inode *src)
-{
- dest->i_atime = src->i_atime;
-}
-
-static void ecryptfs_copy_attr_times(struct inode *dest,
- const struct inode *src)
-{
- dest->i_atime = src->i_atime;
- dest->i_mtime = src->i_mtime;
- dest->i_ctime = src->i_ctime;
-}
-
-static void ecryptfs_copy_attr_timesizes(struct inode *dest,
- const struct inode *src)
-{
- dest->i_atime = src->i_atime;
- dest->i_mtime = src->i_mtime;
- dest->i_ctime = src->i_ctime;
- ecryptfs_copy_inode_size(dest, src);
-}
-
-void ecryptfs_copy_attr_all(struct inode *dest, const struct inode *src)
-{
- dest->i_mode = src->i_mode;
- dest->i_nlink = src->i_nlink;
- dest->i_uid = src->i_uid;
- dest->i_gid = src->i_gid;
- dest->i_rdev = src->i_rdev;
- dest->i_atime = src->i_atime;
- dest->i_mtime = src->i_mtime;
- dest->i_ctime = src->i_ctime;
- dest->i_blkbits = src->i_blkbits;
- dest->i_flags = src->i_flags;
-}
-
/**
* ecryptfs_create_underlying_file
* @lower_dir_inode: inode of the parent in the lower fs of the new file
ecryptfs_printk(KERN_ERR, "Failure in ecryptfs_interpose\n");
goto out_lock;
}
- ecryptfs_copy_attr_timesizes(directory_inode,
- lower_dir_dentry->d_inode);
+ fsstack_copy_attr_times(directory_inode, lower_dir_dentry->d_inode);
+ fsstack_copy_inode_size(directory_inode, lower_dir_dentry->d_inode);
out_lock:
unlock_dir(lower_dir_dentry);
out:
struct ecryptfs_file_info tmp_file_info;
memset(&fake_file, 0, sizeof(fake_file));
- fake_file.f_dentry = ecryptfs_dentry;
+ fake_file.f_path.dentry = ecryptfs_dentry;
memset(&tmp_file_info, 0, sizeof(tmp_file_info));
ecryptfs_set_file_private(&fake_file, &tmp_file_info);
ecryptfs_set_file_lower(&fake_file, lower_file);
"d_name.name = [%s]\n", lower_dentry,
lower_dentry->d_name.name);
lower_inode = lower_dentry->d_inode;
- ecryptfs_copy_attr_atime(dir, lower_dir_dentry->d_inode);
+ fsstack_copy_attr_atime(dir, lower_dir_dentry->d_inode);
BUG_ON(!atomic_read(&lower_dentry->d_count));
ecryptfs_set_dentry_private(dentry,
kmem_cache_alloc(ecryptfs_dentry_info_cache,
rc = ecryptfs_interpose(lower_new_dentry, new_dentry, dir->i_sb, 0);
if (rc)
goto out_lock;
- ecryptfs_copy_attr_timesizes(dir, lower_new_dentry->d_inode);
+ fsstack_copy_attr_times(dir, lower_new_dentry->d_inode);
+ fsstack_copy_inode_size(dir, lower_new_dentry->d_inode);
old_dentry->d_inode->i_nlink =
ecryptfs_inode_to_lower(old_dentry->d_inode)->i_nlink;
i_size_write(new_dentry->d_inode, file_size_save);
printk(KERN_ERR "Error in vfs_unlink; rc = [%d]\n", rc);
goto out_unlock;
}
- ecryptfs_copy_attr_times(dir, lower_dir_inode);
+ fsstack_copy_attr_times(dir, lower_dir_inode);
dentry->d_inode->i_nlink =
ecryptfs_inode_to_lower(dentry->d_inode)->i_nlink;
dentry->d_inode->i_ctime = dir->i_ctime;
rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb, 0);
if (rc)
goto out_lock;
- ecryptfs_copy_attr_timesizes(dir, lower_dir_dentry->d_inode);
+ fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
+ fsstack_copy_inode_size(dir, lower_dir_dentry->d_inode);
out_lock:
unlock_dir(lower_dir_dentry);
dput(lower_dentry);
rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb, 0);
if (rc)
goto out;
- ecryptfs_copy_attr_timesizes(dir, lower_dir_dentry->d_inode);
+ fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
+ fsstack_copy_inode_size(dir, lower_dir_dentry->d_inode);
dir->i_nlink = lower_dir_dentry->d_inode->i_nlink;
out:
unlock_dir(lower_dir_dentry);
dput(lower_dentry);
if (!rc)
d_delete(lower_dentry);
- ecryptfs_copy_attr_times(dir, lower_dir_dentry->d_inode);
+ fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
dir->i_nlink = lower_dir_dentry->d_inode->i_nlink;
unlock_dir(lower_dir_dentry);
if (!rc)
rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb, 0);
if (rc)
goto out;
- ecryptfs_copy_attr_timesizes(dir, lower_dir_dentry->d_inode);
+ fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
+ fsstack_copy_inode_size(dir, lower_dir_dentry->d_inode);
out:
unlock_dir(lower_dir_dentry);
if (!dentry->d_inode)
lower_new_dir_dentry->d_inode, lower_new_dentry);
if (rc)
goto out_lock;
- ecryptfs_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode);
+ fsstack_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode, NULL);
if (new_dir != old_dir)
- ecryptfs_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode);
+ fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode, NULL);
out_lock:
unlock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
dput(lower_new_dentry->d_parent);
rc = -EFAULT;
}
kfree(decoded_name);
- ecryptfs_copy_attr_atime(dentry->d_inode,
- lower_dentry->d_inode);
+ fsstack_copy_attr_atime(dentry->d_inode,
+ lower_dentry->d_inode);
}
out_free_lower_buf:
kfree(lower_buf);
* the file in the underlying filesystem so that the
* truncation has an effect there as well. */
memset(&fake_ecryptfs_file, 0, sizeof(fake_ecryptfs_file));
- fake_ecryptfs_file.f_dentry = dentry;
+ fake_ecryptfs_file.f_path.dentry = dentry;
/* Released at out_free: label */
ecryptfs_set_file_private(&fake_ecryptfs_file,
kmem_cache_alloc(ecryptfs_file_info_cache,
}
rc = notify_change(lower_dentry, ia);
out:
- ecryptfs_copy_attr_all(inode, lower_inode);
+ fsstack_copy_attr_all(inode, lower_inode, NULL);
return rc;
}
#include <linux/pagemap.h>
#include <linux/key.h>
#include <linux/parser.h>
+#include <linux/fs_stack.h>
#include "ecryptfs_kernel.h"
/**
d_add(dentry, inode);
else
d_instantiate(dentry, inode);
- ecryptfs_copy_attr_all(inode, lower_inode);
+ fsstack_copy_attr_all(inode, lower_inode, NULL);
/* This size will be overwritten for real files w/ headers and
* other metadata */
- ecryptfs_copy_inode_size(inode, lower_inode);
+ fsstack_copy_inode_size(inode, lower_inode);
out:
return rc;
}
struct inode *inode;
struct address_space *mapping;
- dentry = file->f_dentry;
+ dentry = file->f_path.dentry;
inode = dentry->d_inode;
mapping = inode->i_mapping;
page = read_cache_page(mapping, index,
int ecryptfs_fill_zeros(struct file *file, loff_t new_length)
{
int rc = 0;
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
pgoff_t old_end_page_index = 0;
pgoff_t index = old_end_page_index;
char *lower_page_data;
const struct address_space_operations *lower_a_ops;
- dentry = file->f_dentry;
+ dentry = file->f_path.dentry;
lower_file = ecryptfs_file_to_lower(file);
lower_dentry = ecryptfs_dentry_to_lower(dentry);
inode = dentry->d_inode;
int rc = 0;
struct ecryptfs_crypt_stat *crypt_stat;
- BUG_ON(!(file && file->f_dentry && file->f_dentry->d_inode));
- crypt_stat =
- &ecryptfs_inode_to_private(file->f_dentry->d_inode)->crypt_stat;
+ BUG_ON(!(file && file->f_path.dentry && file->f_path.dentry->d_inode));
+ crypt_stat = &ecryptfs_inode_to_private(file->f_path.dentry->d_inode)
+ ->crypt_stat;
if (!crypt_stat
|| !ECRYPTFS_CHECK_FLAG(crypt_stat->flags, ECRYPTFS_ENCRYPTED)
|| ECRYPTFS_CHECK_FLAG(crypt_stat->flags, ECRYPTFS_NEW_FILE)) {
lower_inode = ecryptfs_inode_to_lower(inode);
lower_file = ecryptfs_file_to_lower(file);
mutex_lock(&lower_inode->i_mutex);
- crypt_stat =
- &ecryptfs_inode_to_private(file->f_dentry->d_inode)->crypt_stat;
+ crypt_stat = &ecryptfs_inode_to_private(file->f_path.dentry->d_inode)
+ ->crypt_stat;
if (ECRYPTFS_CHECK_FLAG(crypt_stat->flags, ECRYPTFS_NEW_FILE)) {
ecryptfs_printk(KERN_DEBUG, "ECRYPTFS_NEW_FILE flag set in "
"crypt_stat at memory location [%p]\n", crypt_stat);
};
static int efs_readdir(struct file *filp, void *dirent, filldir_t filldir) {
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct buffer_head *bh;
struct efs_dir *dirblock;
goto eexit_4;
dentry->d_op = &eventpollfs_dentry_operations;
d_add(dentry, inode);
- file->f_vfsmnt = mntget(eventpoll_mnt);
- file->f_dentry = dentry;
+ file->f_path.mnt = mntget(eventpoll_mnt);
+ file->f_path.dentry = dentry;
file->f_mapping = inode->i_mapping;
file->f_pos = 0;
#include <linux/binfmts.h>
#include <linux/swap.h>
#include <linux/utsname.h>
+#include <linux/pid_namespace.h>
#include <linux/module.h>
#include <linux/namei.h>
#include <linux/proc_fs.h>
* Reparenting needs write_lock on tasklist_lock,
* so it is safe to do it under read_lock.
*/
- if (unlikely(tsk->group_leader == child_reaper))
- child_reaper = tsk;
+ if (unlikely(tsk->group_leader == child_reaper(tsk)))
+ tsk->nsproxy->pid_ns->child_reaper = tsk;
zap_other_threads(tsk);
read_unlock(&tasklist_lock);
j++;
i = j * __NFDBITS;
fdt = files_fdtable(files);
- if (i >= fdt->max_fds || i >= fdt->max_fdset)
+ if (i >= fdt->max_fds)
break;
set = fdt->close_on_exec->fds_bits[j];
if (!set)
int prepare_binprm(struct linux_binprm *bprm)
{
int mode;
- struct inode * inode = bprm->file->f_dentry->d_inode;
+ struct inode * inode = bprm->file->f_path.dentry->d_inode;
int retval;
mode = inode->i_mode;
bprm->e_uid = current->euid;
bprm->e_gid = current->egid;
- if(!(bprm->file->f_vfsmnt->mnt_flags & MNT_NOSUID)) {
+ if(!(bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)) {
/* Set-uid? */
if (mode & S_ISUID) {
current->personality &= ~PER_CLEAR_ON_SETID;
0600);
if (IS_ERR(file))
goto fail_unlock;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if (inode->i_nlink > 1)
goto close_fail; /* multiple links - don't dump */
- if (!ispipe && d_unhashed(file->f_dentry))
+ if (!ispipe && d_unhashed(file->f_path.dentry))
goto close_fail;
/* AK: actually i see no reason to not allow this for named pipes etc.,
goto close_fail;
if (!file->f_op->write)
goto close_fail;
- if (!ispipe && do_truncate(file->f_dentry, 0, 0, file) != 0)
+ if (!ispipe && do_truncate(file->f_path.dentry, 0, 0, file) != 0)
goto close_fail;
retval = binfmt->core_dump(signr, regs, file);
ext2_readdir (struct file * filp, void * dirent, filldir_t filldir)
{
loff_t pos = filp->f_pos;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
unsigned int offset = pos & ~PAGE_CACHE_MASK;
unsigned long n = pos >> PAGE_CACHE_SHIFT;
#ifdef CONFIG_COMPAT
long ext2_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int ret;
/* These are just misnamed, they actually get/put from/to user an int */
return 1;
}
-#define log2(n) ffz(~(n))
-
/*
* Maximal file size. There is a direct, and {,double-,triple-}indirect
* block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
sbi->s_sbh = bh;
sbi->s_mount_state = le16_to_cpu(es->s_state);
sbi->s_addr_per_block_bits =
- log2 (EXT2_ADDR_PER_BLOCK(sb));
+ ilog2 (EXT2_ADDR_PER_BLOCK(sb));
sbi->s_desc_per_block_bits =
- log2 (EXT2_DESC_PER_BLOCK(sb));
+ ilog2 (EXT2_DESC_PER_BLOCK(sb));
if (sb->s_magic != EXT2_SUPER_MAGIC)
goto cantfind_ext2;
struct ext3_dir_entry_2 *de;
struct super_block *sb;
int err;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int ret = 0;
sb = inode->i_sb;
* We don't set the inode dirty flag since it's not
* critical that it get flushed back to the disk.
*/
- EXT3_I(filp->f_dentry->d_inode)->i_flags &= ~EXT3_INDEX_FL;
+ EXT3_I(filp->f_path.dentry->d_inode)->i_flags &= ~EXT3_INDEX_FL;
}
#endif
stored = 0;
{
struct dir_private_info *info = filp->private_data;
loff_t curr_pos;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block * sb;
int error;
void * dirent, filldir_t filldir)
{
struct dir_private_info *info = filp->private_data;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct fname *fname;
int ret;
unsigned long nr_segs, loff_t pos)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
ssize_t ret;
int err;
#ifdef CONFIG_COMPAT
long ext3_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int ret;
/* These are just misnamed, they actually get/put from/to user an int */
dxtrace(printk("In htree_fill_tree, start hash: %x:%x\n", start_hash,
start_minor_hash));
- dir = dir_file->f_dentry->d_inode;
+ dir = dir_file->f_path.dentry->d_inode;
if (!(EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) {
hinfo.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version;
hinfo.seed = EXT3_SB(dir->i_sb)->s_hash_seed;
}
hinfo.hash = start_hash;
hinfo.minor_hash = 0;
- frame = dx_probe(NULL, dir_file->f_dentry->d_inode, &hinfo, frames, &err);
+ frame = dx_probe(NULL, dir_file->f_path.dentry->d_inode, &hinfo, frames, &err);
if (!frame)
return err;
sb->s_flags = s_flags; /* Restore MS_RDONLY status */
}
-#define log2(n) ffz(~(n))
-
/*
* Maximal file size. There is a direct, and {,double-,triple-}indirect
* block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc);
sbi->s_sbh = bh;
sbi->s_mount_state = le16_to_cpu(es->s_state);
- sbi->s_addr_per_block_bits = log2(EXT3_ADDR_PER_BLOCK(sb));
- sbi->s_desc_per_block_bits = log2(EXT3_DESC_PER_BLOCK(sb));
+ sbi->s_addr_per_block_bits = ilog2(EXT3_ADDR_PER_BLOCK(sb));
+ sbi->s_desc_per_block_bits = ilog2(EXT3_DESC_PER_BLOCK(sb));
for (i=0; i < 4; i++)
sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
sbi->s_def_hash_version = es->s_def_hash_version;
struct ext4_dir_entry_2 *de;
struct super_block *sb;
int err;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int ret = 0;
sb = inode->i_sb;
* We don't set the inode dirty flag since it's not
* critical that it get flushed back to the disk.
*/
- EXT4_I(filp->f_dentry->d_inode)->i_flags &= ~EXT4_INDEX_FL;
+ EXT4_I(filp->f_path.dentry->d_inode)->i_flags &= ~EXT4_INDEX_FL;
}
#endif
stored = 0;
{
struct dir_private_info *info = filp->private_data;
loff_t curr_pos;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block * sb;
int error;
void * dirent, filldir_t filldir)
{
struct dir_private_info *info = filp->private_data;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct fname *fname;
int ret;
unsigned long nr_segs, loff_t pos)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
ssize_t ret;
int err;
from, to, NULL, do_journal_get_write_access);
if (ret)
/* fatal error, just put the handle and return */
- journal_stop(handle);
+ ext4_journal_stop(handle);
}
return ret;
#ifdef CONFIG_COMPAT
long ext4_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int ret;
/* These are just misnamed, they actually get/put from/to user an int */
dxtrace(printk("In htree_fill_tree, start hash: %x:%x\n", start_hash,
start_minor_hash));
- dir = dir_file->f_dentry->d_inode;
+ dir = dir_file->f_path.dentry->d_inode;
if (!(EXT4_I(dir)->i_flags & EXT4_INDEX_FL)) {
hinfo.hash_version = EXT4_SB(dir->i_sb)->s_def_hash_version;
hinfo.seed = EXT4_SB(dir->i_sb)->s_hash_seed;
}
hinfo.hash = start_hash;
hinfo.minor_hash = 0;
- frame = dx_probe(NULL, dir_file->f_dentry->d_inode, &hinfo, frames, &err);
+ frame = dx_probe(NULL, dir_file->f_path.dentry->d_inode, &hinfo, frames, &err);
if (!frame)
return err;
if (!memcmp(de->name, MSDOS_DOT, MSDOS_NAME))
inum = inode->i_ino;
else if (!memcmp(de->name, MSDOS_DOTDOT, MSDOS_NAME)) {
- inum = parent_ino(filp->f_dentry);
+ inum = parent_ino(filp->f_path.dentry);
} else {
loff_t i_pos = fat_make_i_pos(sb, bh, de);
struct inode *tmp = fat_iget(sb, i_pos);
static int fat_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
return __fat_readdir(inode, filp, dirent, filldir, 0, 0);
}
set_fs(KERNEL_DS);
lock_kernel();
- ret = fat_dir_ioctl(file->f_dentry->d_inode, file,
+ ret = fat_dir_ioctl(file->f_path.dentry->d_inode, file,
cmd, (unsigned long) &d);
unlock_kernel();
set_fs(oldfs);
}
/* This MUST be done before doing anything irreversible... */
- err = notify_change(filp->f_dentry, &ia);
+ err = notify_change(filp->f_path.dentry, &ia);
if (err)
goto up;
start = files->next_fd;
newfd = start;
- if (start < fdt->max_fdset) {
+ if (start < fdt->max_fds)
newfd = find_next_zero_bit(fdt->open_fds->fds_bits,
- fdt->max_fdset, start);
- }
+ fdt->max_fds, start);
error = -EMFILE;
if (newfd >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur)
static int setfl(int fd, struct file * filp, unsigned long arg)
{
- struct inode * inode = filp->f_dentry->d_inode;
+ struct inode * inode = filp->f_path.dentry->d_inode;
int error = 0;
/*
*/
static DEFINE_PER_CPU(struct fdtable_defer, fdtable_defer_list);
-
-/*
- * Allocate an fd array, using kmalloc or vmalloc.
- * Note: the array isn't cleared at allocation time.
- */
-struct file ** alloc_fd_array(int num)
+static inline void * alloc_fdmem(unsigned int size)
{
- struct file **new_fds;
- int size = num * sizeof(struct file *);
-
if (size <= PAGE_SIZE)
- new_fds = (struct file **) kmalloc(size, GFP_KERNEL);
- else
- new_fds = (struct file **) vmalloc(size);
- return new_fds;
+ return kmalloc(size, GFP_KERNEL);
+ else
+ return vmalloc(size);
}
-void free_fd_array(struct file **array, int num)
+static inline void free_fdarr(struct fdtable *fdt)
{
- int size = num * sizeof(struct file *);
-
- if (!array) {
- printk (KERN_ERR "free_fd_array: array = 0 (num = %d)\n", num);
- return;
- }
-
- if (num <= NR_OPEN_DEFAULT) /* Don't free the embedded fd array! */
- return;
- else if (size <= PAGE_SIZE)
- kfree(array);
+ if (fdt->max_fds <= (PAGE_SIZE / sizeof(struct file *)))
+ kfree(fdt->fd);
else
- vfree(array);
+ vfree(fdt->fd);
}
-static void __free_fdtable(struct fdtable *fdt)
+static inline void free_fdset(struct fdtable *fdt)
{
- free_fdset(fdt->open_fds, fdt->max_fdset);
- free_fdset(fdt->close_on_exec, fdt->max_fdset);
- free_fd_array(fdt->fd, fdt->max_fds);
- kfree(fdt);
+ if (fdt->max_fds <= (PAGE_SIZE * BITS_PER_BYTE / 2))
+ kfree(fdt->open_fds);
+ else
+ vfree(fdt->open_fds);
}
static void free_fdtable_work(struct work_struct *work)
spin_unlock_bh(&f->lock);
while(fdt) {
struct fdtable *next = fdt->next;
- __free_fdtable(fdt);
+ vfree(fdt->fd);
+ free_fdset(fdt);
+ kfree(fdt);
fdt = next;
}
}
-static void free_fdtable_rcu(struct rcu_head *rcu)
+void free_fdtable_rcu(struct rcu_head *rcu)
{
struct fdtable *fdt = container_of(rcu, struct fdtable, rcu);
- int fdset_size, fdarray_size;
struct fdtable_defer *fddef;
BUG_ON(!fdt);
- fdset_size = fdt->max_fdset / 8;
- fdarray_size = fdt->max_fds * sizeof(struct file *);
- if (fdt->free_files) {
+ if (fdt->max_fds <= NR_OPEN_DEFAULT) {
/*
- * The this fdtable was embedded in the files structure
- * and the files structure itself was getting destroyed.
- * It is now safe to free the files structure.
+ * This fdtable is embedded in the files structure and that
+ * structure itself is getting destroyed.
*/
- kmem_cache_free(files_cachep, fdt->free_files);
+ kmem_cache_free(files_cachep,
+ container_of(fdt, struct files_struct, fdtab));
return;
}
- if (fdt->max_fdset <= EMBEDDED_FD_SET_SIZE &&
- fdt->max_fds <= NR_OPEN_DEFAULT) {
- /*
- * The fdtable was embedded
- */
- return;
- }
- if (fdset_size <= PAGE_SIZE && fdarray_size <= PAGE_SIZE) {
- kfree(fdt->open_fds);
- kfree(fdt->close_on_exec);
+ if (fdt->max_fds <= (PAGE_SIZE / sizeof(struct file *))) {
kfree(fdt->fd);
+ kfree(fdt->open_fds);
kfree(fdt);
} else {
fddef = &get_cpu_var(fdtable_defer_list);
}
}
-void free_fdtable(struct fdtable *fdt)
-{
- if (fdt->free_files ||
- fdt->max_fdset > EMBEDDED_FD_SET_SIZE ||
- fdt->max_fds > NR_OPEN_DEFAULT)
- call_rcu(&fdt->rcu, free_fdtable_rcu);
-}
-
/*
* Expand the fdset in the files_struct. Called with the files spinlock
* held for write.
*/
-static void copy_fdtable(struct fdtable *nfdt, struct fdtable *fdt)
+static void copy_fdtable(struct fdtable *nfdt, struct fdtable *ofdt)
{
- int i;
- int count;
-
- BUG_ON(nfdt->max_fdset < fdt->max_fdset);
- BUG_ON(nfdt->max_fds < fdt->max_fds);
- /* Copy the existing tables and install the new pointers */
-
- i = fdt->max_fdset / (sizeof(unsigned long) * 8);
- count = (nfdt->max_fdset - fdt->max_fdset) / 8;
+ unsigned int cpy, set;
- /*
- * Don't copy the entire array if the current fdset is
- * not yet initialised.
- */
- if (i) {
- memcpy (nfdt->open_fds, fdt->open_fds,
- fdt->max_fdset/8);
- memcpy (nfdt->close_on_exec, fdt->close_on_exec,
- fdt->max_fdset/8);
- memset (&nfdt->open_fds->fds_bits[i], 0, count);
- memset (&nfdt->close_on_exec->fds_bits[i], 0, count);
- }
-
- /* Don't copy/clear the array if we are creating a new
- fd array for fork() */
- if (fdt->max_fds) {
- memcpy(nfdt->fd, fdt->fd,
- fdt->max_fds * sizeof(struct file *));
- /* clear the remainder of the array */
- memset(&nfdt->fd[fdt->max_fds], 0,
- (nfdt->max_fds - fdt->max_fds) *
- sizeof(struct file *));
- }
-}
-
-/*
- * Allocate an fdset array, using kmalloc or vmalloc.
- * Note: the array isn't cleared at allocation time.
- */
-fd_set * alloc_fdset(int num)
-{
- fd_set *new_fdset;
- int size = num / 8;
+ BUG_ON(nfdt->max_fds < ofdt->max_fds);
+ if (ofdt->max_fds == 0)
+ return;
- if (size <= PAGE_SIZE)
- new_fdset = (fd_set *) kmalloc(size, GFP_KERNEL);
- else
- new_fdset = (fd_set *) vmalloc(size);
- return new_fdset;
+ cpy = ofdt->max_fds * sizeof(struct file *);
+ set = (nfdt->max_fds - ofdt->max_fds) * sizeof(struct file *);
+ memcpy(nfdt->fd, ofdt->fd, cpy);
+ memset((char *)(nfdt->fd) + cpy, 0, set);
+
+ cpy = ofdt->max_fds / BITS_PER_BYTE;
+ set = (nfdt->max_fds - ofdt->max_fds) / BITS_PER_BYTE;
+ memcpy(nfdt->open_fds, ofdt->open_fds, cpy);
+ memset((char *)(nfdt->open_fds) + cpy, 0, set);
+ memcpy(nfdt->close_on_exec, ofdt->close_on_exec, cpy);
+ memset((char *)(nfdt->close_on_exec) + cpy, 0, set);
}
-void free_fdset(fd_set *array, int num)
+static struct fdtable * alloc_fdtable(unsigned int nr)
{
- if (num <= EMBEDDED_FD_SET_SIZE) /* Don't free an embedded fdset */
- return;
- else if (num <= 8 * PAGE_SIZE)
- kfree(array);
- else
- vfree(array);
-}
+ struct fdtable *fdt;
+ char *data;
-static struct fdtable *alloc_fdtable(int nr)
-{
- struct fdtable *fdt = NULL;
- int nfds = 0;
- fd_set *new_openset = NULL, *new_execset = NULL;
- struct file **new_fds;
+ /*
+ * Figure out how many fds we actually want to support in this fdtable.
+ * Allocation steps are keyed to the size of the fdarray, since it
+ * grows far faster than any of the other dynamic data. We try to fit
+ * the fdarray into comfortable page-tuned chunks: starting at 1024B
+ * and growing in powers of two from there on.
+ */
+ nr /= (1024 / sizeof(struct file *));
+ nr = roundup_pow_of_two(nr + 1);
+ nr *= (1024 / sizeof(struct file *));
+ if (nr > NR_OPEN)
+ nr = NR_OPEN;
- fdt = kzalloc(sizeof(*fdt), GFP_KERNEL);
+ fdt = kmalloc(sizeof(struct fdtable), GFP_KERNEL);
if (!fdt)
- goto out;
-
- nfds = max_t(int, 8 * L1_CACHE_BYTES, roundup_pow_of_two(nr + 1));
- if (nfds > NR_OPEN)
- nfds = NR_OPEN;
+ goto out;
+ fdt->max_fds = nr;
+ data = alloc_fdmem(nr * sizeof(struct file *));
+ if (!data)
+ goto out_fdt;
+ fdt->fd = (struct file **)data;
+ data = alloc_fdmem(max_t(unsigned int,
+ 2 * nr / BITS_PER_BYTE, L1_CACHE_BYTES));
+ if (!data)
+ goto out_arr;
+ fdt->open_fds = (fd_set *)data;
+ data += nr / BITS_PER_BYTE;
+ fdt->close_on_exec = (fd_set *)data;
+ INIT_RCU_HEAD(&fdt->rcu);
+ fdt->next = NULL;
- new_openset = alloc_fdset(nfds);
- new_execset = alloc_fdset(nfds);
- if (!new_openset || !new_execset)
- goto out;
- fdt->open_fds = new_openset;
- fdt->close_on_exec = new_execset;
- fdt->max_fdset = nfds;
-
- nfds = NR_OPEN_DEFAULT;
- /*
- * Expand to the max in easy steps, and keep expanding it until
- * we have enough for the requested fd array size.
- */
- do {
-#if NR_OPEN_DEFAULT < 256
- if (nfds < 256)
- nfds = 256;
- else
-#endif
- if (nfds < (PAGE_SIZE / sizeof(struct file *)))
- nfds = PAGE_SIZE / sizeof(struct file *);
- else {
- nfds = nfds * 2;
- if (nfds > NR_OPEN)
- nfds = NR_OPEN;
- }
- } while (nfds <= nr);
- new_fds = alloc_fd_array(nfds);
- if (!new_fds)
- goto out2;
- fdt->fd = new_fds;
- fdt->max_fds = nfds;
- fdt->free_files = NULL;
return fdt;
-out2:
- nfds = fdt->max_fdset;
-out:
- free_fdset(new_openset, nfds);
- free_fdset(new_execset, nfds);
+
+out_arr:
+ free_fdarr(fdt);
+out_fdt:
kfree(fdt);
+out:
return NULL;
}
* we dropped the lock
*/
cur_fdt = files_fdtable(files);
- if (nr >= cur_fdt->max_fds || nr >= cur_fdt->max_fdset) {
+ if (nr >= cur_fdt->max_fds) {
/* Continue as planned */
copy_fdtable(new_fdt, cur_fdt);
rcu_assign_pointer(files->fdt, new_fdt);
- free_fdtable(cur_fdt);
+ if (cur_fdt->max_fds > NR_OPEN_DEFAULT)
+ call_rcu(&cur_fdt->rcu, free_fdtable_rcu);
} else {
/* Somebody else expanded, so undo our attempt */
- __free_fdtable(new_fdt);
+ free_fdarr(new_fdt);
+ free_fdset(new_fdt);
+ kfree(new_fdt);
}
return 1;
}
fdt = files_fdtable(files);
/* Do we need to expand? */
- if (nr < fdt->max_fdset && nr < fdt->max_fds)
+ if (nr < fdt->max_fds)
return 0;
/* Can we expand? */
- if (fdt->max_fdset >= NR_OPEN || fdt->max_fds >= NR_OPEN ||
- nr >= NR_OPEN)
+ if (nr >= NR_OPEN)
return -EMFILE;
/* All good, so we try */
*/
void fastcall __fput(struct file *file)
{
- struct dentry *dentry = file->f_dentry;
- struct vfsmount *mnt = file->f_vfsmnt;
+ struct dentry *dentry = file->f_path.dentry;
+ struct vfsmount *mnt = file->f_path.mnt;
struct inode *inode = dentry->d_inode;
might_sleep();
put_write_access(inode);
put_pid(file->f_owner.pid);
file_kill(file);
- file->f_dentry = NULL;
- file->f_vfsmnt = NULL;
+ file->f_path.dentry = NULL;
+ file->f_path.mnt = NULL;
file_free(file);
dput(dentry);
mntput(mnt);
file_list_lock();
list_for_each(p, &sb->s_files) {
struct file *file = list_entry(p, struct file, f_u.fu_list);
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
/* File with pending delete? */
if (inode->i_nlink == 0)
static int
vxfs_readdir(struct file *fp, void *retp, filldir_t filler)
{
- struct inode *ip = fp->f_dentry->d_inode;
+ struct inode *ip = fp->f_path.dentry->d_inode;
struct super_block *sbp = ip->i_sb;
u_long bsize = sbp->s_blocksize;
u_long page, npages, block, pblocks, nblocks, offset;
{
struct fuse_conn *fc;
mutex_lock(&fuse_mutex);
- fc = file->f_dentry->d_inode->i_private;
+ fc = file->f_path.dentry->d_inode->i_private;
if (fc)
fc = fuse_conn_get(fc);
mutex_unlock(&fuse_mutex);
int err;
size_t nbytes;
struct page *page;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_req *req;
isdir ? FUSE_RELEASEDIR : FUSE_RELEASE);
/* Hold vfsmount and dentry until release is finished */
- req->vfsmount = mntget(file->f_vfsmnt);
- req->dentry = dget(file->f_dentry);
+ req->vfsmount = mntget(file->f_path.mnt);
+ req->dentry = dget(file->f_path.dentry);
request_send_background(fc, req);
}
static int fuse_flush(struct file *file, fl_owner_t id)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_file *ff = file->private_data;
struct fuse_req *req;
static ssize_t fuse_direct_io(struct file *file, const char __user *buf,
size_t count, loff_t *ppos, int write)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct fuse_conn *fc = get_fuse_conn(inode);
size_t nmax = write ? fc->max_write : fc->max_read;
loff_t pos = *ppos;
static ssize_t fuse_direct_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
ssize_t res;
/* Don't allow parallel writes to the same file */
mutex_lock(&inode->i_mutex);
static void fuse_lk_fill(struct fuse_req *req, struct file *file,
const struct file_lock *fl, int opcode, pid_t pid)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_file *ff = file->private_data;
struct fuse_lk_in *arg = &req->misc.lk_in;
static int fuse_getlk(struct file *file, struct file_lock *fl)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_req *req;
struct fuse_lk_out outarg;
static int fuse_setlk(struct file *file, struct file_lock *fl)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_req *req;
int opcode = (fl->fl_flags & FL_SLEEP) ? FUSE_SETLKW : FUSE_SETLK;
static int fuse_file_lock(struct file *file, int cmd, struct file_lock *fl)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct fuse_conn *fc = get_fuse_conn(inode);
int err;
static int gfs2_get_flags(struct file *filp, u32 __user *ptr)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_holder gh;
int error;
*/
static int do_gfs2_set_flags(struct file *filp, u32 reqflags, u32 mask)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
struct buffer_head *bh;
{
struct gfs2_file *fp = file->private_data;
struct gfs2_holder *fl_gh = &fp->f_fl_gh;
- struct gfs2_inode *ip = GFS2_I(file->f_dentry->d_inode);
+ struct gfs2_inode *ip = GFS2_I(file->f_path.dentry->d_inode);
struct gfs2_glock *gl;
unsigned int state;
int flags;
*/
static int hfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
int len, err;
char strbuf[HFS_MAX_NAMELEN];
const struct iovec *iov, loff_t offset, unsigned long nr_segs)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_dentry->d_inode->i_mapping->host;
+ struct inode *inode = file->f_path.dentry->d_inode->i_mapping->host;
return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, hfs_get_block, NULL);
static int hfsplus_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
int len, err;
char strbuf[HFSPLUS_MAX_STRLEN + 1];
const struct iovec *iov, loff_t offset, unsigned long nr_segs)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_dentry->d_inode->i_mapping->host;
+ struct inode *inode = file->f_path.dentry->d_inode->i_mapping->host;
return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs, hfsplus_get_block, NULL);
return(list_entry(inode, struct hostfs_inode_info, vfs_inode));
}
-#define FILE_HOSTFS_I(file) HOSTFS_I((file)->f_dentry->d_inode)
+#define FILE_HOSTFS_I(file) HOSTFS_I((file)->f_path.dentry->d_inode)
int hostfs_d_delete(struct dentry *dentry)
{
unsigned long long next, ino;
int error, len;
- name = dentry_name(file->f_dentry, 0);
+ name = dentry_name(file->f_path.dentry, 0);
if(name == NULL) return(-ENOMEM);
dir = open_dir(name, &error);
kfree(name);
if(w)
r = 1;
- name = dentry_name(file->f_dentry, 0);
+ name = dentry_name(file->f_path.dentry, 0);
if(name == NULL)
return(-ENOMEM);
loff_t new_off = off + (whence == 1 ? filp->f_pos : 0);
loff_t pos;
struct quad_buffer_head qbh;
- struct inode *i = filp->f_dentry->d_inode;
+ struct inode *i = filp->f_path.dentry->d_inode;
struct hpfs_inode_info *hpfs_inode = hpfs_i(i);
struct super_block *s = i->i_sb;
static int hpfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct hpfs_inode_info *hpfs_inode = hpfs_i(inode);
struct quad_buffer_head qbh;
struct hpfs_dirent *de;
retval = do_sync_write(file, buf, count, ppos);
if (retval > 0)
- hpfs_i(file->f_dentry->d_inode)->i_dirty = 1;
+ hpfs_i(file->f_path.dentry->d_inode)->i_dirty = 1;
return retval;
}
ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
ssize_t n;
- read = file->f_dentry->d_inode->i_fop->read;
+ read = file->f_path.dentry->d_inode->i_fop->read;
if(!is_user)
set_fs(KERNEL_DS);
ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *);
int err;
- write = proc_file->f_dentry->d_inode->i_fop->write;
+ write = proc_file->f_path.dentry->d_inode->i_fop->write;
proc_file->f_pos = file->f_pos;
err = (*write)(proc_file, buf, len, &proc_file->f_pos);
if(data == NULL)
goto out;
- host_file = dentry_name(file->f_dentry, strlen("/rw"));
+ host_file = dentry_name(file->f_path.dentry, strlen("/rw"));
if(host_file == NULL)
goto out_free2;
loff_t (*llseek)(struct file *, loff_t, int);
loff_t ret;
- llseek = proc_file->f_dentry->d_inode->i_fop->llseek;
+ llseek = proc_file->f_path.dentry->d_inode->i_fop->llseek;
if(llseek != NULL){
ret = (*llseek)(proc_file, off, where);
if(ret < 0)
struct hppfs_dirent dirent = ((struct hppfs_dirent)
{ .vfs_dirent = ent,
.filldir = filldir,
- .dentry = file->f_dentry } );
+ .dentry = file->f_path.dentry } );
int err;
- readdir = proc_file->f_dentry->d_inode->i_fop->readdir;
+ readdir = proc_file->f_path.dentry->d_inode->i_fop->readdir;
proc_file->f_pos = file->f_pos;
err = (*readdir)(proc_file, &dirent, hppfs_filldir);
static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
loff_t len, vma_len;
int ret;
d_instantiate(dentry, inode);
inode->i_size = size;
inode->i_nlink = 0;
- file->f_vfsmnt = mntget(hugetlbfs_vfsmount);
- file->f_dentry = dentry;
+ file->f_path.mnt = mntget(hugetlbfs_vfsmount);
+ file->f_path.dentry = dentry;
file->f_mapping = inode->i_mapping;
file->f_op = &hugetlbfs_file_operations;
file->f_mode = FMODE_WRITE | FMODE_READ;
res = inode->i_mapping->a_ops->bmap(inode->i_mapping, block);
return res;
}
-
EXPORT_SYMBOL(bmap);
/**
if (IS_RDONLY(inode))
return;
-
- if ((inode->i_flags & S_NOATIME) ||
- (inode->i_sb->s_flags & MS_NOATIME) ||
- ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode)))
+ if (inode->i_flags & S_NOATIME)
+ return;
+ if (inode->i_sb->s_flags & MS_NOATIME)
+ return;
+ if ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode))
return;
/*
* We may have a NULL vfsmount when coming from NFSD
*/
- if (mnt &&
- ((mnt->mnt_flags & MNT_NOATIME) ||
- ((mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode))))
- return;
+ if (mnt) {
+ if (mnt->mnt_flags & MNT_NOATIME)
+ return;
+ if ((mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode))
+ return;
- now = current_fs_time(inode->i_sb);
- if (!timespec_equal(&inode->i_atime, &now)) {
- inode->i_atime = now;
- mark_inode_dirty_sync(inode);
+ if (mnt->mnt_flags & MNT_RELATIME) {
+ /*
+ * With relative atime, only update atime if the
+ * previous atime is earlier than either the ctime or
+ * mtime.
+ */
+ if (timespec_compare(&inode->i_mtime,
+ &inode->i_atime) < 0 &&
+ timespec_compare(&inode->i_ctime,
+ &inode->i_atime) < 0)
+ return;
+ }
}
-}
+ now = current_fs_time(inode->i_sb);
+ if (timespec_equal(&inode->i_atime, &now))
+ return;
+
+ inode->i_atime = now;
+ mark_inode_dirty_sync(inode);
+}
EXPORT_SYMBOL(touch_atime);
/**
void file_update_time(struct file *file)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct timespec now;
int sync_it = 0;
dev->ih = ih;
filp->f_op = &inotify_fops;
- filp->f_vfsmnt = mntget(inotify_mnt);
- filp->f_dentry = dget(inotify_mnt->mnt_root);
- filp->f_mapping = filp->f_dentry->d_inode->i_mapping;
+ filp->f_path.mnt = mntget(inotify_mnt);
+ filp->f_path.dentry = dget(inotify_mnt->mnt_root);
+ filp->f_mapping = filp->f_path.dentry->d_inode->i_mapping;
filp->f_mode = FMODE_READ;
filp->f_flags = O_RDONLY;
filp->private_data = dev;
goto out;
} else if (filp->f_op->ioctl) {
lock_kernel();
- error = filp->f_op->ioctl(filp->f_dentry->d_inode,
+ error = filp->f_op->ioctl(filp->f_path.dentry->d_inode,
filp, cmd, arg);
unlock_kernel();
}
{
int error;
int block;
- struct inode * inode = filp->f_dentry->d_inode;
+ struct inode * inode = filp->f_path.dentry->d_inode;
int __user *p = (int __user *)arg;
switch (cmd) {
break;
case FIOQSIZE:
- if (S_ISDIR(filp->f_dentry->d_inode->i_mode) ||
- S_ISREG(filp->f_dentry->d_inode->i_mode) ||
- S_ISLNK(filp->f_dentry->d_inode->i_mode)) {
- loff_t res = inode_get_bytes(filp->f_dentry->d_inode);
+ if (S_ISDIR(filp->f_path.dentry->d_inode->i_mode) ||
+ S_ISREG(filp->f_path.dentry->d_inode->i_mode) ||
+ S_ISLNK(filp->f_path.dentry->d_inode->i_mode)) {
+ loff_t res = inode_get_bytes(filp->f_path.dentry->d_inode);
error = copy_to_user((loff_t __user *)arg, &res, sizeof(res)) ? -EFAULT : 0;
}
else
error = -ENOTTY;
break;
default:
- if (S_ISREG(filp->f_dentry->d_inode->i_mode))
+ if (S_ISREG(filp->f_path.dentry->d_inode->i_mode))
error = file_ioctl(filp, cmd, arg);
else
error = do_ioctl(filp, cmd, arg);
*/
static int zisofs_readpage(struct file *file, struct page *page)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct address_space *mapping = inode->i_mapping;
unsigned int maxpage, xpage, fpage, blockindex;
unsigned long offset;
/* Handle the case of the '..' directory */
if (de->name_len[0] == 1 && de->name[0] == 1) {
- inode_number = parent_ino(filp->f_dentry);
+ inode_number = parent_ino(filp->f_path.dentry);
if (filldir(dirent, "..", 2, filp->f_pos, inode_number, DT_DIR) < 0)
break;
filp->f_pos += de_len;
int result;
char * tmpname;
struct iso_directory_record * tmpde;
- struct inode *inode = filp->f_dentry->d_inode;
-
+ struct inode *inode = filp->f_path.dentry->d_inode;
tmpname = (char *)__get_free_page(GFP_KERNEL);
if (tmpname == NULL)
spin_lock_init(&transaction->t_handle_lock);
/* Set up the commit timer for the new transaction. */
- journal->j_commit_timer.expires = transaction->t_expires;
+ journal->j_commit_timer.expires = round_jiffies(transaction->t_expires);
add_timer(&journal->j_commit_timer);
J_ASSERT(journal->j_running_transaction == NULL);
jffs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
struct jffs_file *f;
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct jffs_control *c = (struct jffs_control *)inode->i_sb->s_fs_info;
int j;
D1({
int len = dentry->d_name.len;
- char *_name = (char *) kmalloc(len + 1, GFP_KERNEL);
+ char *_name = kmalloc(len + 1, GFP_KERNEL);
memcpy(_name, dentry->d_name.name, len);
_name[len] = '\0';
printk("***jffs_mkdir(): dir = 0x%p, name = \"%s\", "
D1({
int len = dentry->d_name.len;
const char *name = dentry->d_name.name;
- char *_name = (char *) kmalloc(len + 1, GFP_KERNEL);
+ char *_name = kmalloc(len + 1, GFP_KERNEL);
memcpy(_name, name, len);
_name[len] = '\0';
printk("***jffs_remove(): file = \"%s\", ino = %ld\n", _name, dentry->d_inode->i_ino);
struct jffs_control *c;
struct jffs_file *f;
struct jffs_node *node;
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
int recoverable = 0;
size_t written = 0;
loff_t pos = *ppos;
int err;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
D2(printk("***jffs_file_write(): inode: 0x%p (ino: %lu), "
"filp: 0x%p, buf: 0x%p, count: %d\n",
int i, length;
/* Allocate read buffer */
- read_buf = (__u8 *) kmalloc (sizeof(__u8) * 4096, GFP_KERNEL);
+ read_buf = kmalloc(sizeof(__u8) * 4096, GFP_KERNEL);
if (!read_buf) {
printk(KERN_NOTICE "kmalloc failed in jffs_checksum_flash()\n");
return -ENOMEM;
/* Allocate read buffers */
- read_buf1 = (__u8 *) kmalloc (sizeof(__u8) * READ_AHEAD_BYTES, GFP_KERNEL);
+ read_buf1 = kmalloc(sizeof(__u8) * READ_AHEAD_BYTES, GFP_KERNEL);
if (!read_buf1)
return -ENOMEM;
- read_buf2 = (__u8 *) kmalloc (sizeof(__u8) * READ_AHEAD_BYTES, GFP_KERNEL);
+ read_buf2 = kmalloc(sizeof(__u8) * READ_AHEAD_BYTES, GFP_KERNEL);
if (!read_buf2) {
kfree(read_buf1);
return -ENOMEM;
}
/* Allocate read buffer */
- read_buf = (__u8 *) kmalloc (sizeof(__u8) * 4096, GFP_KERNEL);
+ read_buf = kmalloc(sizeof(__u8) * 4096, GFP_KERNEL);
if (!read_buf) {
flash_safe_release(fmc->mtd);
return -ENOMEM;
kfree(f->name);
DJM(no_name--);
}
- if (!(f->name = (char *) kmalloc(raw_inode->nsize + 1,
+ if (!(f->name = kmalloc(raw_inode->nsize + 1,
GFP_KERNEL))) {
return -ENOMEM;
}
printk("jffs_find_child(): Found \"%s\".\n", f->name);
}
else {
- char *copy = (char *) kmalloc(len + 1, GFP_KERNEL);
+ char *copy = kmalloc(len + 1, GFP_KERNEL);
if (copy) {
memcpy(copy, name, len);
copy[len] = '\0';
return;
}
- if (!(space = (char *) kmalloc(indent + 1, GFP_KERNEL))) {
+ if (!(space = kmalloc(indent + 1, GFP_KERNEL))) {
printk("jffs_print_tree(): Out of memory!\n");
return;
}
{
struct jffs2_inode_info *f;
struct jffs2_sb_info *c;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct jffs2_full_dirent *fd;
unsigned long offset, curofs;
- D1(printk(KERN_DEBUG "jffs2_readdir() for dir_i #%lu\n", filp->f_dentry->d_inode->i_ino));
+ D1(printk(KERN_DEBUG "jffs2_readdir() for dir_i #%lu\n", filp->f_path.dentry->d_inode->i_ino));
f = JFFS2_INODE_INFO(inode);
c = JFFS2_SB_INFO(inode->i_sb);
offset++;
}
if (offset == 1) {
- unsigned long pino = parent_ino(filp->f_dentry);
+ unsigned long pino = parent_ino(filp->f_path.dentry);
D1(printk(KERN_DEBUG "Dirent 1: \"..\", ino #%lu\n", pino));
if (filldir(dirent, "..", 2, 1, pino, DT_DIR) < 0)
goto out;
*/
int jfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *ip = filp->f_dentry->d_inode;
+ struct inode *ip = filp->f_path.dentry->d_inode;
struct nls_table *codepage = JFS_SBI(ip->i_sb)->nls_tab;
int rc = 0;
loff_t dtpos; /* legacy OS/2 style position */
struct component_name lkey;
struct component_name rkey;
- lkey.name = (wchar_t *) kmalloc((JFS_NAME_MAX + 1) * sizeof(wchar_t),
+ lkey.name = kmalloc((JFS_NAME_MAX + 1) * sizeof(wchar_t),
GFP_KERNEL);
if (lkey.name == NULL)
return -ENOMEM;
- rkey.name = (wchar_t *) kmalloc((JFS_NAME_MAX + 1) * sizeof(wchar_t),
+ rkey.name = kmalloc((JFS_NAME_MAX + 1) * sizeof(wchar_t),
GFP_KERNEL);
if (rkey.name == NULL) {
kfree(lkey.name);
/*
* file system option (superblock flag)
*/
-/* mount time flag to disable journaling to disk */
-#define JFS_NOINTEGRITY 0x00000010
+
+/* directory option */
+#define JFS_UNICODE 0x00000001 /* unicode name */
/* mount time flags for error handling */
#define JFS_ERR_REMOUNT_RO 0x00000002 /* remount read-only */
#define JFS_ERR_CONTINUE 0x00000004 /* continue */
#define JFS_ERR_PANIC 0x00000008 /* panic */
+/* Quota support */
#define JFS_USRQUOTA 0x00000010
#define JFS_GRPQUOTA 0x00000020
-/* platform option (conditional compilation) */
-#define JFS_AIX 0x80000000 /* AIX support */
-/* POSIX name/directory support */
-
-#define JFS_OS2 0x40000000 /* OS/2 support */
-/* case-insensitive name/directory support */
-
-#define JFS_DFS 0x20000000 /* DCE DFS LFS support */
-
-#define JFS_LINUX 0x10000000 /* Linux support */
-/* case-sensitive name/directory support */
-
-/* directory option */
-#define JFS_UNICODE 0x00000001 /* unicode name */
+/* mount time flag to disable journaling to disk */
+#define JFS_NOINTEGRITY 0x00000040
/* commit option */
#define JFS_COMMIT 0x00000f00 /* commit option mask */
#define JFS_LAZYCOMMIT 0x00000200 /* lazy commit */
#define JFS_TMPFS 0x00000400 /* temporary file system -
* do not log/commit:
+ * Never implemented
*/
/* log logical volume option */
#define JFS_SPARSE 0x00020000 /* sparse regular file */
/* DASD Limits F226941 */
-#define JFS_DASD_ENABLED 0x00040000 /* DASD limits enabled */
-#define JFS_DASD_PRIME 0x00080000 /* Prime DASD usage on boot */
+#define JFS_DASD_ENABLED 0x00040000 /* DASD limits enabled */
+#define JFS_DASD_PRIME 0x00080000 /* Prime DASD usage on boot */
/* big endian flag */
-#define JFS_SWAP_BYTES 0x00100000 /* running on big endian computer */
+#define JFS_SWAP_BYTES 0x00100000 /* running on big endian computer */
/* Directory index */
-#define JFS_DIR_INDEX 0x00200000 /* Persistent index for */
- /* directory entries */
+#define JFS_DIR_INDEX 0x00200000 /* Persistent index for */
+/* platform options */
+#define JFS_LINUX 0x10000000 /* Linux support */
+#define JFS_DFS 0x20000000 /* DCE DFS LFS support */
+/* Never implemented */
+
+#define JFS_OS2 0x40000000 /* OS/2 support */
+/* case-insensitive name/directory support */
+
+#define JFS_AIX 0x80000000 /* AIX support */
+/* POSIX name/directory support - Never implemented*/
/*
* buffer cache configuration
* allocate/initialize the in-memory inode map control structure
*/
/* allocate the in-memory inode map control structure. */
- imap = (struct inomap *) kmalloc(sizeof(struct inomap), GFP_KERNEL);
+ imap = kmalloc(sizeof(struct inomap), GFP_KERNEL);
if (imap == NULL) {
jfs_err("diMount: kmalloc returned NULL!");
return -ENOMEM;
{
static struct qstr cursor_name = {.len = 1, .name = "."};
- file->private_data = d_alloc(file->f_dentry, &cursor_name);
+ file->private_data = d_alloc(file->f_path.dentry, &cursor_name);
return file->private_data ? 0 : -ENOMEM;
}
loff_t dcache_dir_lseek(struct file *file, loff_t offset, int origin)
{
- mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
switch (origin) {
case 1:
offset += file->f_pos;
if (offset >= 0)
break;
default:
- mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
return -EINVAL;
}
if (offset != file->f_pos) {
spin_lock(&dcache_lock);
list_del(&cursor->d_u.d_child);
- p = file->f_dentry->d_subdirs.next;
- while (n && p != &file->f_dentry->d_subdirs) {
+ p = file->f_path.dentry->d_subdirs.next;
+ while (n && p != &file->f_path.dentry->d_subdirs) {
struct dentry *next;
next = list_entry(p, struct dentry, d_u.d_child);
if (!d_unhashed(next) && next->d_inode)
spin_unlock(&dcache_lock);
}
}
- mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
return offset;
}
int dcache_readdir(struct file * filp, void * dirent, filldir_t filldir)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct dentry *cursor = filp->private_data;
struct list_head *p, *q = &cursor->d_u.d_child;
ino_t ino;
struct nlm_host * b_host;
struct file_lock * b_lock; /* local file lock */
unsigned short b_reclaim; /* got to reclaim lock */
- u32 b_status; /* grant callback status */
+ __be32 b_status; /* grant callback status */
};
static LIST_HEAD(nlm_blocked);
block->b_host = host;
block->b_lock = fl;
init_waitqueue_head(&block->b_wait);
- block->b_status = NLM_LCK_BLOCKED;
+ block->b_status = nlm_lck_blocked;
list_add(&block->b_list, &nlm_blocked);
}
return block;
* nlmclnt_lock for an explanation.
*/
ret = wait_event_interruptible_timeout(block->b_wait,
- block->b_status != NLM_LCK_BLOCKED,
+ block->b_status != nlm_lck_blocked,
timeout);
if (ret < 0)
return -ERESTARTSYS;
continue;
if (!nlm_cmp_addr(&block->b_host->h_addr, addr))
continue;
- if (nfs_compare_fh(NFS_FH(fl_blocked->fl_file->f_dentry->d_inode) ,fh) != 0)
+ if (nfs_compare_fh(NFS_FH(fl_blocked->fl_file->f_path.dentry->d_inode) ,fh) != 0)
continue;
/* Alright, we found a lock. Set the return status
* and wake up the caller
*/
- block->b_status = NLM_LCK_GRANTED;
+ block->b_status = nlm_granted;
wake_up(&block->b_wait);
res = nlm_granted;
}
/* Now, wake up all processes that sleep on a blocked lock */
list_for_each_entry(block, &nlm_blocked, b_list) {
if (block->b_host == host) {
- block->b_status = NLM_LCK_DENIED_GRACE_PERIOD;
+ block->b_status = nlm_lck_denied_grace_period;
wake_up(&block->b_wait);
}
}
static int nlmclnt_test(struct nlm_rqst *, struct file_lock *);
static int nlmclnt_lock(struct nlm_rqst *, struct file_lock *);
static int nlmclnt_unlock(struct nlm_rqst *, struct file_lock *);
-static int nlm_stat_to_errno(u32 stat);
+static int nlm_stat_to_errno(__be32 stat);
static void nlmclnt_locks_init_private(struct file_lock *fl, struct nlm_host *host);
static int nlmclnt_cancel(struct nlm_host *, int , struct file_lock *);
nlmclnt_next_cookie(&argp->cookie);
argp->state = nsm_local_state;
- memcpy(&lock->fh, NFS_FH(fl->fl_file->f_dentry->d_inode), sizeof(struct nfs_fh));
+ memcpy(&lock->fh, NFS_FH(fl->fl_file->f_path.dentry->d_inode), sizeof(struct nfs_fh));
lock->caller = utsname()->nodename;
lock->oh.data = req->a_owner;
lock->oh.len = snprintf(req->a_owner, sizeof(req->a_owner), "%u@%s",
}
break;
} else
- if (resp->status == NLM_LCK_DENIED_GRACE_PERIOD) {
+ if (resp->status == nlm_lck_denied_grace_period) {
dprintk("lockd: server in grace period\n");
if (argp->reclaim) {
printk(KERN_WARNING
goto out;
switch (req->a_res.status) {
- case NLM_LCK_GRANTED:
+ case nlm_granted:
fl->fl_type = F_UNLCK;
break;
- case NLM_LCK_DENIED:
+ case nlm_lck_denied:
/*
* Report the conflicting lock back to the application.
*/
if (!req->a_args.block)
break;
/* Did a reclaimer thread notify us of a server reboot? */
- if (resp->status == NLM_LCK_DENIED_GRACE_PERIOD)
+ if (resp->status == nlm_lck_denied_grace_period)
continue;
- if (resp->status != NLM_LCK_BLOCKED)
+ if (resp->status != nlm_lck_blocked)
break;
/* Wait on an NLM blocking lock */
status = nlmclnt_block(block, req, NLMCLNT_POLL_TIMEOUT);
*/
if (status < 0)
goto out_unblock;
- if (resp->status != NLM_LCK_BLOCKED)
+ if (resp->status != nlm_lck_blocked)
break;
}
- if (resp->status == NLM_LCK_GRANTED) {
+ if (resp->status == nlm_granted) {
down_read(&host->h_rwsem);
/* Check whether or not the server has rebooted */
if (fl->fl_u.nfs_fl.state != host->h_state) {
out_unblock:
nlmclnt_finish_block(block);
/* Cancel the blocked request if it is still pending */
- if (resp->status == NLM_LCK_BLOCKED)
+ if (resp->status == nlm_lck_blocked)
nlmclnt_cancel(host, req->a_args.block, fl);
out:
nlm_release_call(req);
req->a_args.reclaim = 1;
if ((status = nlmclnt_call(req, NLMPROC_LOCK)) >= 0
- && req->a_res.status == NLM_LCK_GRANTED)
+ && req->a_res.status == nlm_granted)
return 0;
printk(KERN_WARNING "lockd: failed to reclaim lock for pid %d "
"(errno %d, status %d)\n", fl->fl_pid,
- status, req->a_res.status);
+ status, ntohl(req->a_res.status));
/*
* FIXME: This is a serious failure. We can
if (status < 0)
goto out;
- if (resp->status == NLM_LCK_GRANTED)
+ if (resp->status == nlm_granted)
goto out;
- if (resp->status != NLM_LCK_DENIED_NOLOCKS)
+ if (resp->status != nlm_lck_denied_nolocks)
printk("lockd: unexpected unlock status: %d\n", resp->status);
/* What to do now? I'm out of my depth... */
status = -ENOLCK;
static void nlmclnt_unlock_callback(struct rpc_task *task, void *data)
{
struct nlm_rqst *req = data;
- int status = req->a_res.status;
+ u32 status = ntohl(req->a_res.status);
if (RPC_ASSASSINATED(task))
goto die;
static void nlmclnt_cancel_callback(struct rpc_task *task, void *data)
{
struct nlm_rqst *req = data;
+ u32 status = ntohl(req->a_res.status);
if (RPC_ASSASSINATED(task))
goto die;
}
dprintk("lockd: cancel status %u (task %u)\n",
- req->a_res.status, task->tk_pid);
+ status, task->tk_pid);
- switch (req->a_res.status) {
+ switch (status) {
case NLM_LCK_GRANTED:
case NLM_LCK_DENIED_GRACE_PERIOD:
case NLM_LCK_DENIED:
goto retry_cancel;
default:
printk(KERN_NOTICE "lockd: weird return %d for CANCEL call\n",
- req->a_res.status);
+ status);
}
die:
* Convert an NLM status code to a generic kernel errno
*/
static int
-nlm_stat_to_errno(u32 status)
+nlm_stat_to_errno(__be32 status)
{
- switch(status) {
+ switch(ntohl(status)) {
case NLM_LCK_GRANTED:
return 0;
case NLM_LCK_DENIED:
__be32 ret;
dprintk("lockd: nlmsvc_lock(%s/%ld, ty=%d, pi=%d, %Ld-%Ld, bl=%d)\n",
- file->f_file->f_dentry->d_inode->i_sb->s_id,
- file->f_file->f_dentry->d_inode->i_ino,
+ file->f_file->f_path.dentry->d_inode->i_sb->s_id,
+ file->f_file->f_path.dentry->d_inode->i_ino,
lock->fl.fl_type, lock->fl.fl_pid,
(long long)lock->fl.fl_start,
(long long)lock->fl.fl_end,
struct nlm_lock *conflock)
{
dprintk("lockd: nlmsvc_testlock(%s/%ld, ty=%d, %Ld-%Ld)\n",
- file->f_file->f_dentry->d_inode->i_sb->s_id,
- file->f_file->f_dentry->d_inode->i_ino,
+ file->f_file->f_path.dentry->d_inode->i_sb->s_id,
+ file->f_file->f_path.dentry->d_inode->i_ino,
lock->fl.fl_type,
(long long)lock->fl.fl_start,
(long long)lock->fl.fl_end);
int error;
dprintk("lockd: nlmsvc_unlock(%s/%ld, pi=%d, %Ld-%Ld)\n",
- file->f_file->f_dentry->d_inode->i_sb->s_id,
- file->f_file->f_dentry->d_inode->i_ino,
+ file->f_file->f_path.dentry->d_inode->i_sb->s_id,
+ file->f_file->f_path.dentry->d_inode->i_ino,
lock->fl.fl_pid,
(long long)lock->fl.fl_start,
(long long)lock->fl.fl_end);
int status = 0;
dprintk("lockd: nlmsvc_cancel(%s/%ld, pi=%d, %Ld-%Ld)\n",
- file->f_file->f_dentry->d_inode->i_sb->s_id,
- file->f_file->f_dentry->d_inode->i_ino,
+ file->f_file->f_path.dentry->d_inode->i_sb->s_id,
+ file->f_file->f_path.dentry->d_inode->i_ino,
lock->fl.fl_pid,
(long long)lock->fl.fl_start,
(long long)lock->fl.fl_end);
* block.
*/
void
-nlmsvc_grant_reply(struct nlm_cookie *cookie, u32 status)
+nlmsvc_grant_reply(struct nlm_cookie *cookie, __be32 status)
{
struct nlm_block *block;
return;
if (block) {
- if (status == NLM_LCK_DENIED_GRACE_PERIOD) {
+ if (status == nlm_lck_denied_grace_period) {
/* Try again in a couple of seconds */
nlmsvc_insert_block(block, 10 * HZ);
} else {
return nlm_lck_denied;
}
- share = (struct nlm_share *) kmalloc(sizeof(*share) + oh->len,
+ share = kmalloc(sizeof(*share) + oh->len,
GFP_KERNEL);
if (share == NULL)
return nlm_lck_denied_nolocks;
static inline void nlm_debug_print_file(char *msg, struct nlm_file *file)
{
- struct inode *inode = file->f_file->f_dentry->d_inode;
+ struct inode *inode = file->f_file->f_path.dentry->d_inode;
dprintk("lockd: %s %s/%ld\n",
msg, inode->i_sb->s_id, inode->i_ino);
{
if (!(p = nlm_decode_cookie(p, &resp->cookie)))
return 0;
- resp->status = ntohl(*p++);
+ resp->status = *p++;
return xdr_argsize_check(rqstp, p);
}
{
if (!(p = nlm_decode_cookie(p, &resp->cookie)))
return -EIO;
- resp->status = ntohl(*p++);
- if (resp->status == NLM_LCK_DENIED) {
+ resp->status = *p++;
+ if (resp->status == nlm_lck_denied) {
struct file_lock *fl = &resp->lock.fl;
u32 excl;
s32 start, len, end;
{
if (!(p = nlm_decode_cookie(p, &resp->cookie)))
return -EIO;
- resp->status = ntohl(*p++);
+ resp->status = *p++;
return 0;
}
{
if (!(p = nlm4_decode_cookie(p, &resp->cookie)))
return 0;
- resp->status = ntohl(*p++);
+ resp->status = *p++;
return xdr_argsize_check(rqstp, p);
}
{
if (!(p = nlm4_decode_cookie(p, &resp->cookie)))
return -EIO;
- resp->status = ntohl(*p++);
- if (resp->status == NLM_LCK_DENIED) {
+ resp->status = *p++;
+ if (resp->status == nlm_lck_denied) {
struct file_lock *fl = &resp->lock.fl;
u32 excl;
s64 start, end, len;
{
if (!(p = nlm4_decode_cookie(p, &resp->cookie)))
return -EIO;
- resp->status = ntohl(*p++);
+ resp->status = *p++;
return 0;
}
start = filp->f_pos;
break;
case SEEK_END:
- start = i_size_read(filp->f_dentry->d_inode);
+ start = i_size_read(filp->f_path.dentry->d_inode);
break;
default:
return -EINVAL;
start = filp->f_pos;
break;
case SEEK_END:
- start = i_size_read(filp->f_dentry->d_inode);
+ start = i_size_read(filp->f_path.dentry->d_inode);
break;
default:
return -EINVAL;
struct file_lock *cfl;
lock_kernel();
- for (cfl = filp->f_dentry->d_inode->i_flock; cfl; cfl = cfl->fl_next) {
+ for (cfl = filp->f_path.dentry->d_inode->i_flock; cfl; cfl = cfl->fl_next) {
if (!IS_POSIX(cfl))
continue;
if (posix_locks_conflict(cfl, fl))
{
struct file_lock *new_fl = NULL;
struct file_lock **before;
- struct inode * inode = filp->f_dentry->d_inode;
+ struct inode * inode = filp->f_path.dentry->d_inode;
int error = 0;
int found = 0;
*/
int posix_lock_file(struct file *filp, struct file_lock *fl)
{
- return __posix_lock_file_conf(filp->f_dentry->d_inode, fl, NULL);
+ return __posix_lock_file_conf(filp->f_path.dentry->d_inode, fl, NULL);
}
EXPORT_SYMBOL(posix_lock_file);
int posix_lock_file_conf(struct file *filp, struct file_lock *fl,
struct file_lock *conflock)
{
- return __posix_lock_file_conf(filp->f_dentry->d_inode, fl, conflock);
+ return __posix_lock_file_conf(filp->f_path.dentry->d_inode, fl, conflock);
}
EXPORT_SYMBOL(posix_lock_file_conf);
int type = F_UNLCK;
lock_kernel();
- time_out_leases(filp->f_dentry->d_inode);
- for (fl = filp->f_dentry->d_inode->i_flock; fl && IS_LEASE(fl);
+ time_out_leases(filp->f_path.dentry->d_inode);
+ for (fl = filp->f_path.dentry->d_inode->i_flock; fl && IS_LEASE(fl);
fl = fl->fl_next) {
if (fl->fl_file == filp) {
type = fl->fl_type & ~F_INPROGRESS;
static int __setlease(struct file *filp, long arg, struct file_lock **flp)
{
struct file_lock *fl, **before, **my_before = NULL, *lease;
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
int error, rdlease_count = 0, wrlease_count = 0;
int setlease(struct file *filp, long arg, struct file_lock **lease)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
int error;
int fcntl_setlease(unsigned int fd, struct file *filp, long arg)
{
struct file_lock fl, *flp = &fl;
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
int error;
if (copy_from_user(&flock, l, sizeof(flock)))
goto out;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
/* Don't allow mandatory locks on files that may be memory mapped
* and shared.
if (copy_from_user(&flock, l, sizeof(flock)))
goto out;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
/* Don't allow mandatory locks on files that may be memory mapped
* and shared.
* posix_lock_file(). Another process could be setting a lock on this
* file at the same time, but we wouldn't remove that lock anyway.
*/
- if (!filp->f_dentry->d_inode->i_flock)
+ if (!filp->f_path.dentry->d_inode->i_flock)
return;
lock.fl_type = F_UNLCK;
*/
void locks_remove_flock(struct file *filp)
{
- struct inode * inode = filp->f_dentry->d_inode;
+ struct inode * inode = filp->f_path.dentry->d_inode;
struct file_lock *fl;
struct file_lock **before;
struct inode *inode = NULL;
if (fl->fl_file != NULL)
- inode = fl->fl_file->f_dentry->d_inode;
+ inode = fl->fl_file->f_path.dentry->d_inode;
out += sprintf(out, "%d:%s ", id, pfx);
if (IS_POSIX(fl)) {
static int minix_readdir(struct file * filp, void * dirent, filldir_t filldir)
{
unsigned long pos = filp->f_pos;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
unsigned offset = pos & ~PAGE_CACHE_MASK;
unsigned long n = pos >> PAGE_CACHE_SHIFT;
*/
int file_permission(struct file *file, int mask)
{
- return permission(file->f_dentry->d_inode, mask, NULL);
+ return permission(file->f_path.dentry->d_inode, mask, NULL);
}
/*
int deny_write_access(struct file * file)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
spin_lock(&inode->i_lock);
if (atomic_read(&inode->i_writecount) > 0) {
*/
void release_open_intent(struct nameidata *nd)
{
- if (nd->intent.open.file->f_dentry == NULL)
+ if (nd->intent.open.file->f_path.dentry == NULL)
put_filp(nd->intent.open.file);
else
fput(nd->intent.open.file);
return PTR_ERR(link);
}
-struct path {
- struct vfsmount *mnt;
- struct dentry *dentry;
-};
-
static inline void dput_path(struct path *path, struct nameidata *nd)
{
dput(path->dentry);
if (!file)
goto out_fail;
- dentry = file->f_dentry;
+ dentry = file->f_path.dentry;
retval = -ENOTDIR;
if (!S_ISDIR(dentry->d_inode->i_mode))
if (retval)
goto fput_fail;
- nd->mnt = mntget(file->f_vfsmnt);
+ nd->mnt = mntget(file->f_path.mnt);
nd->dentry = dget(dentry);
fput_light(file, fput_needed);
#include <linux/module.h>
#include <linux/sysfs.h>
#include <linux/seq_file.h>
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include <linux/namei.h>
#include <linux/security.h>
#include <linux/mount.h>
static inline int check_mnt(struct vfsmount *mnt)
{
- return mnt->mnt_namespace == current->nsproxy->namespace;
+ return mnt->mnt_ns == current->nsproxy->mnt_ns;
}
-static void touch_namespace(struct namespace *ns)
+static void touch_mnt_namespace(struct mnt_namespace *ns)
{
if (ns) {
ns->event = ++event;
}
}
-static void __touch_namespace(struct namespace *ns)
+static void __touch_mnt_namespace(struct mnt_namespace *ns)
{
if (ns && ns->event != event) {
ns->event = event;
struct vfsmount *parent = mnt->mnt_parent;
struct vfsmount *m;
LIST_HEAD(head);
- struct namespace *n = parent->mnt_namespace;
+ struct mnt_namespace *n = parent->mnt_ns;
BUG_ON(parent == mnt);
list_add_tail(&head, &mnt->mnt_list);
list_for_each_entry(m, &head, mnt_list)
- m->mnt_namespace = n;
+ m->mnt_ns = n;
list_splice(&head, n->list.prev);
list_add_tail(&mnt->mnt_hash, mount_hashtable +
hash(parent, mnt->mnt_mountpoint));
list_add_tail(&mnt->mnt_child, &parent->mnt_mounts);
- touch_namespace(n);
+ touch_mnt_namespace(n);
}
static struct vfsmount *next_mnt(struct vfsmount *p, struct vfsmount *root)
/* iterator */
static void *m_start(struct seq_file *m, loff_t *pos)
{
- struct namespace *n = m->private;
+ struct mnt_namespace *n = m->private;
struct list_head *p;
loff_t l = *pos;
static void *m_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct namespace *n = m->private;
+ struct mnt_namespace *n = m->private;
struct list_head *p = ((struct vfsmount *)v)->mnt_list.next;
(*pos)++;
return p == &n->list ? NULL : list_entry(p, struct vfsmount, mnt_list);
{ MNT_NOEXEC, ",noexec" },
{ MNT_NOATIME, ",noatime" },
{ MNT_NODIRATIME, ",nodiratime" },
+ { MNT_RELATIME, ",relatime" },
{ 0, NULL }
};
struct proc_fs_info *fs_infop;
list_for_each_entry(p, kill, mnt_hash) {
list_del_init(&p->mnt_expire);
list_del_init(&p->mnt_list);
- __touch_namespace(p->mnt_namespace);
- p->mnt_namespace = NULL;
+ __touch_mnt_namespace(p->mnt_ns);
+ p->mnt_ns = NULL;
list_del_init(&p->mnt_child);
if (p->mnt_parent != p)
p->mnt_mountpoint->d_mounted--;
if (parent_nd) {
detach_mnt(source_mnt, parent_nd);
attach_mnt(source_mnt, nd);
- touch_namespace(current->nsproxy->namespace);
+ touch_mnt_namespace(current->nsproxy->mnt_ns);
} else {
mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt);
commit_tree(source_mnt);
*/
if (!propagate_mount_busy(mnt, 2)) {
/* delete from the namespace */
- touch_namespace(mnt->mnt_namespace);
+ touch_mnt_namespace(mnt->mnt_ns);
list_del_init(&mnt->mnt_list);
- mnt->mnt_namespace = NULL;
+ mnt->mnt_ns = NULL;
umount_tree(mnt, 1, umounts);
spin_unlock(&vfsmount_lock);
} else {
*/
static void expire_mount_list(struct list_head *graveyard, struct list_head *mounts)
{
- struct namespace *namespace;
+ struct mnt_namespace *ns;
struct vfsmount *mnt;
while (!list_empty(graveyard)) {
/* don't do anything if the namespace is dead - all the
* vfsmounts from it are going away anyway */
- namespace = mnt->mnt_namespace;
- if (!namespace || !namespace->root)
+ ns = mnt->mnt_ns;
+ if (!ns || !ns->root)
continue;
- get_namespace(namespace);
+ get_mnt_ns(ns);
spin_unlock(&vfsmount_lock);
down_write(&namespace_sem);
up_write(&namespace_sem);
release_mounts(&umounts);
mntput(mnt);
- put_namespace(namespace);
+ put_mnt_ns(ns);
spin_lock(&vfsmount_lock);
}
}
mnt_flags |= MNT_NOATIME;
if (flags & MS_NODIRATIME)
mnt_flags |= MNT_NODIRATIME;
+ if (flags & MS_RELATIME)
+ mnt_flags |= MNT_RELATIME;
flags &= ~(MS_NOSUID | MS_NOEXEC | MS_NODEV | MS_ACTIVE |
- MS_NOATIME | MS_NODIRATIME);
+ MS_NOATIME | MS_NODIRATIME | MS_RELATIME);
/* ... and get the mountpoint */
retval = path_lookup(dir_name, LOOKUP_FOLLOW, &nd);
* Allocate a new namespace structure and populate it with contents
* copied from the namespace of the passed in task structure.
*/
-struct namespace *dup_namespace(struct task_struct *tsk, struct fs_struct *fs)
+struct mnt_namespace *dup_mnt_ns(struct task_struct *tsk,
+ struct fs_struct *fs)
{
- struct namespace *namespace = tsk->nsproxy->namespace;
- struct namespace *new_ns;
+ struct mnt_namespace *mnt_ns = tsk->nsproxy->mnt_ns;
+ struct mnt_namespace *new_ns;
struct vfsmount *rootmnt = NULL, *pwdmnt = NULL, *altrootmnt = NULL;
struct vfsmount *p, *q;
- new_ns = kmalloc(sizeof(struct namespace), GFP_KERNEL);
+ new_ns = kmalloc(sizeof(struct mnt_namespace), GFP_KERNEL);
if (!new_ns)
return NULL;
down_write(&namespace_sem);
/* First pass: copy the tree topology */
- new_ns->root = copy_tree(namespace->root, namespace->root->mnt_root,
+ new_ns->root = copy_tree(mnt_ns->root, mnt_ns->root->mnt_root,
CL_COPY_ALL | CL_EXPIRE);
if (!new_ns->root) {
up_write(&namespace_sem);
* as belonging to new namespace. We have already acquired a private
* fs_struct, so tsk->fs->lock is not needed.
*/
- p = namespace->root;
+ p = mnt_ns->root;
q = new_ns->root;
while (p) {
- q->mnt_namespace = new_ns;
+ q->mnt_ns = new_ns;
if (fs) {
if (p == fs->rootmnt) {
rootmnt = p;
fs->altrootmnt = mntget(q);
}
}
- p = next_mnt(p, namespace->root);
+ p = next_mnt(p, mnt_ns->root);
q = next_mnt(q, new_ns->root);
}
up_write(&namespace_sem);
return new_ns;
}
-int copy_namespace(int flags, struct task_struct *tsk)
+int copy_mnt_ns(int flags, struct task_struct *tsk)
{
- struct namespace *namespace = tsk->nsproxy->namespace;
- struct namespace *new_ns;
+ struct mnt_namespace *ns = tsk->nsproxy->mnt_ns;
+ struct mnt_namespace *new_ns;
int err = 0;
- if (!namespace)
+ if (!ns)
return 0;
- get_namespace(namespace);
+ get_mnt_ns(ns);
if (!(flags & CLONE_NEWNS))
return 0;
goto out;
}
- new_ns = dup_namespace(tsk, tsk->fs);
+ new_ns = dup_mnt_ns(tsk, tsk->fs);
if (!new_ns) {
err = -ENOMEM;
goto out;
}
- tsk->nsproxy->namespace = new_ns;
+ tsk->nsproxy->mnt_ns = new_ns;
out:
- put_namespace(namespace);
+ put_mnt_ns(ns);
return err;
}
detach_mnt(user_nd.mnt, &root_parent);
attach_mnt(user_nd.mnt, &old_nd); /* mount old root on put_old */
attach_mnt(new_nd.mnt, &root_parent); /* mount new_root on / */
- touch_namespace(current->nsproxy->namespace);
+ touch_mnt_namespace(current->nsproxy->mnt_ns);
spin_unlock(&vfsmount_lock);
chroot_fs_refs(&user_nd, &new_nd);
security_sb_post_pivotroot(&user_nd, &new_nd);
static void __init init_mount_tree(void)
{
struct vfsmount *mnt;
- struct namespace *namespace;
+ struct mnt_namespace *ns;
mnt = do_kern_mount("rootfs", 0, "rootfs", NULL);
if (IS_ERR(mnt))
panic("Can't create rootfs");
- namespace = kmalloc(sizeof(*namespace), GFP_KERNEL);
- if (!namespace)
+ ns = kmalloc(sizeof(*ns), GFP_KERNEL);
+ if (!ns)
panic("Can't allocate initial namespace");
- atomic_set(&namespace->count, 1);
- INIT_LIST_HEAD(&namespace->list);
- init_waitqueue_head(&namespace->poll);
- namespace->event = 0;
- list_add(&mnt->mnt_list, &namespace->list);
- namespace->root = mnt;
- mnt->mnt_namespace = namespace;
-
- init_task.nsproxy->namespace = namespace;
- get_namespace(namespace);
-
- set_fs_pwd(current->fs, namespace->root, namespace->root->mnt_root);
- set_fs_root(current->fs, namespace->root, namespace->root->mnt_root);
+ atomic_set(&ns->count, 1);
+ INIT_LIST_HEAD(&ns->list);
+ init_waitqueue_head(&ns->poll);
+ ns->event = 0;
+ list_add(&mnt->mnt_list, &ns->list);
+ ns->root = mnt;
+ mnt->mnt_ns = ns;
+
+ init_task.nsproxy->mnt_ns = ns;
+ get_mnt_ns(ns);
+
+ set_fs_pwd(current->fs, ns->root, ns->root->mnt_root);
+ set_fs_root(current->fs, ns->root, ns->root->mnt_root);
}
void __init mnt_init(unsigned long mempages)
init_mount_tree();
}
-void __put_namespace(struct namespace *namespace)
+void __put_mnt_ns(struct mnt_namespace *ns)
{
- struct vfsmount *root = namespace->root;
+ struct vfsmount *root = ns->root;
LIST_HEAD(umount_list);
- namespace->root = NULL;
+ ns->root = NULL;
spin_unlock(&vfsmount_lock);
down_write(&namespace_sem);
spin_lock(&vfsmount_lock);
spin_unlock(&vfsmount_lock);
up_write(&namespace_sem);
release_mounts(&umount_list);
- kfree(namespace);
+ kfree(ns);
}
static int ncp_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct page *page = NULL;
struct ncp_server *server = NCP_SERVER(inode);
ncp_fill_cache(struct file *filp, void *dirent, filldir_t filldir,
struct ncp_cache_control *ctrl, struct ncp_entry_info *entry)
{
- struct dentry *newdent, *dentry = filp->f_dentry;
+ struct dentry *newdent, *dentry = filp->f_path.dentry;
struct inode *newino, *inode = dentry->d_inode;
struct ncp_cache_control ctl = *ctrl;
struct qstr qname;
ncp_read_volume_list(struct file *filp, void *dirent, filldir_t filldir,
struct ncp_cache_control *ctl)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct ncp_server *server = NCP_SERVER(inode);
struct ncp_volume_info info;
ncp_do_readdir(struct file *filp, void *dirent, filldir_t filldir,
struct ncp_cache_control *ctl)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *dir = dentry->d_inode;
struct ncp_server *server = NCP_SERVER(dir);
struct nw_search_sequence seq;
static ssize_t
ncp_file_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
size_t already_read = 0;
off_t pos;
static ssize_t
ncp_file_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
size_t already_written = 0;
off_t pos;
char *optarg;
unsigned long optint;
int version = 0;
+ int ret;
data->flags = 0;
data->int_flags = 0;
data->mounted_uid = 0;
- data->wdog_pid = -1;
+ data->wdog_pid = NULL;
data->ncp_fd = ~0;
data->time_out = 10;
data->retry_count = 20;
data->mounted_vol[0] = 0;
while ((optval = ncp_getopt("ncpfs", &options, ncp_opts, NULL, &optarg, &optint)) != 0) {
- if (optval < 0)
- return optval;
+ ret = optval;
+ if (ret < 0)
+ goto err;
switch (optval) {
case 'u':
data->uid = optint;
data->flags = optint;
break;
case 'w':
- data->wdog_pid = optint;
+ data->wdog_pid = find_get_pid(optint);
break;
case 'n':
data->ncp_fd = optint;
data->info_fd = optint;
break;
case 'v':
- if (optint < NCP_MOUNT_VERSION_V4) {
- return -ECHRNG;
- }
- if (optint > NCP_MOUNT_VERSION_V5) {
- return -ECHRNG;
- }
+ ret = -ECHRNG;
+ if (optint < NCP_MOUNT_VERSION_V4)
+ goto err;
+ if (optint > NCP_MOUNT_VERSION_V5)
+ goto err;
version = optint;
break;
}
}
return 0;
+err:
+ put_pid(data->wdog_pid);
+ data->wdog_pid = NULL;
+ return ret;
}
static int ncp_fill_super(struct super_block *sb, void *raw_data, int silent)
#endif
struct ncp_entry_info finfo;
+ data.wdog_pid = NULL;
server = kzalloc(sizeof(struct ncp_server), GFP_KERNEL);
if (!server)
return -ENOMEM;
data.flags = md->flags;
data.int_flags = NCP_IMOUNT_LOGGEDIN_POSSIBLE;
data.mounted_uid = md->mounted_uid;
- data.wdog_pid = md->wdog_pid;
+ data.wdog_pid = find_get_pid(md->wdog_pid);
data.ncp_fd = md->ncp_fd;
data.time_out = md->time_out;
data.retry_count = md->retry_count;
data.flags = md->flags;
data.int_flags = 0;
data.mounted_uid = md->mounted_uid;
- data.wdog_pid = md->wdog_pid;
+ data.wdog_pid = find_get_pid(md->wdog_pid);
data.ncp_fd = md->ncp_fd;
data.time_out = md->time_out;
data.retry_count = md->retry_count;
if (!ncp_filp)
goto out;
error = -ENOTSOCK;
- sock_inode = ncp_filp->f_dentry->d_inode;
+ sock_inode = ncp_filp->f_path.dentry->d_inode;
if (!S_ISSOCK(sock_inode->i_mode))
goto out_fput;
sock = SOCKET_I(sock_inode);
if (!server->info_filp)
goto out_fput;
error = -ENOTSOCK;
- sock_inode = server->info_filp->f_dentry->d_inode;
+ sock_inode = server->info_filp->f_path.dentry->d_inode;
if (!S_ISSOCK(sock_inode->i_mode))
goto out_fput2;
info_sock = SOCKET_I(sock_inode);
*/
fput(ncp_filp);
out:
+ put_pid(data.wdog_pid);
sb->s_fs_info = NULL;
kfree(server);
return error;
if (server->info_filp)
fput(server->info_filp);
fput(server->ncp_filp);
- kill_proc(server->m.wdog_pid, SIGTERM, 1);
+ kill_pid(server->m.wdog_pid, SIGTERM, 1);
+ put_pid(server->m.wdog_pid);
kfree(server->priv.data);
kfree(server->auth.object_name);
ncp_get_fs_info(struct ncp_server * server, struct file *file,
struct ncp_fs_info __user *arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct ncp_fs_info info;
if ((file_permission(file, MAY_WRITE) != 0)
ncp_get_fs_info_v2(struct ncp_server * server, struct file *file,
struct ncp_fs_info_v2 __user * arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct ncp_fs_info_v2 info2;
if ((file_permission(file, MAY_WRITE) != 0)
ncp_get_compat_fs_info_v2(struct ncp_server * server, struct file *file,
struct compat_ncp_fs_info_v2 __user * arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct compat_ncp_fs_info_v2 info2;
if ((file_permission(file, MAY_WRITE) != 0)
#ifdef CONFIG_COMPAT
long ncp_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int ret;
lock_kernel();
unsigned long address, int *type)
{
struct file *file = area->vm_file;
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct page* page;
char *pg_addr;
/* This is used for a general mmap of a ncp file */
int ncp_mmap(struct file *file, struct vm_area_struct *vma)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
DPRINTK("ncp_mmap: called\n");
int nfs_readdir_filler(nfs_readdir_descriptor_t *desc, struct page *page)
{
struct file *file = desc->file;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct rpc_cred *cred = nfs_file_cred(file);
unsigned long timestamp;
int error;
again:
timestamp = jiffies;
- error = NFS_PROTO(inode)->readdir(file->f_dentry, cred, desc->entry->cookie, page,
+ error = NFS_PROTO(inode)->readdir(file->f_path.dentry, cred, desc->entry->cookie, page,
NFS_SERVER(inode)->dtsize, desc->plus);
if (error < 0) {
/* We requested READDIRPLUS, but the server doesn't grok it */
static inline
int find_dirent_page(nfs_readdir_descriptor_t *desc)
{
- struct inode *inode = desc->file->f_dentry->d_inode;
+ struct inode *inode = desc->file->f_path.dentry->d_inode;
struct page *page;
int status;
filldir_t filldir)
{
struct file *file = desc->file;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct rpc_cred *cred = nfs_file_cred(file);
struct page *page = NULL;
int status;
status = -ENOMEM;
goto out;
}
- desc->error = NFS_PROTO(inode)->readdir(file->f_dentry, cred, *desc->dir_cookie,
+ desc->error = NFS_PROTO(inode)->readdir(file->f_path.dentry, cred, *desc->dir_cookie,
page,
NFS_SERVER(inode)->dtsize,
desc->plus);
*/
static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
nfs_readdir_descriptor_t my_desc,
*desc = &my_desc;
loff_t nfs_llseek_dir(struct file *filp, loff_t offset, int origin)
{
- mutex_lock(&filp->f_dentry->d_inode->i_mutex);
+ mutex_lock(&filp->f_path.dentry->d_inode->i_mutex);
switch (origin) {
case 1:
offset += filp->f_pos;
((struct nfs_open_context *)filp->private_data)->dir_cookie = 0;
}
out:
- mutex_unlock(&filp->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&filp->f_path.dentry->d_inode->i_mutex);
return offset;
}
static struct dentry *nfs_readdir_lookup(nfs_readdir_descriptor_t *desc)
{
- struct dentry *parent = desc->file->f_dentry;
+ struct dentry *parent = desc->file->f_path.dentry;
struct inode *dir = parent->d_inode;
struct nfs_entry *entry = desc->entry;
struct dentry *dentry, *alias;
ssize_t nfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t pos, unsigned long nr_segs)
{
dprintk("NFS: nfs_direct_IO (%s) off/no(%Ld/%lu) EINVAL\n",
- iocb->ki_filp->f_dentry->d_name.name,
+ iocb->ki_filp->f_path.dentry->d_name.name,
(long long) pos, nr_segs);
return -EINVAL;
size_t count = iov[0].iov_len;
dprintk("nfs: direct read(%s/%s, %lu@%Ld)\n",
- file->f_dentry->d_parent->d_name.name,
- file->f_dentry->d_name.name,
+ file->f_path.dentry->d_parent->d_name.name,
+ file->f_path.dentry->d_name.name,
(unsigned long) count, (long long) pos);
if (nr_segs != 1)
size_t count = iov[0].iov_len;
dfprintk(VFS, "nfs: direct write(%s/%s, %lu@%Ld)\n",
- file->f_dentry->d_parent->d_name.name,
- file->f_dentry->d_name.name,
+ file->f_path.dentry->d_parent->d_name.name,
+ file->f_path.dentry->d_name.name,
(unsigned long) count, (long long) pos);
if (nr_segs != 1)
nfs_file_flush(struct file *file, fl_owner_t id)
{
struct nfs_open_context *ctx = (struct nfs_open_context *)file->private_data;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int status;
dfprintk(VFS, "nfs: flush(%s/%ld)\n", inode->i_sb->s_id, inode->i_ino);
nfs_file_read(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
- struct dentry * dentry = iocb->ki_filp->f_dentry;
+ struct dentry * dentry = iocb->ki_filp->f_path.dentry;
struct inode * inode = dentry->d_inode;
ssize_t result;
size_t count = iov_length(iov, nr_segs);
nfs_file_sendfile(struct file *filp, loff_t *ppos, size_t count,
read_actor_t actor, void *target)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
ssize_t res;
static int
nfs_file_mmap(struct file * file, struct vm_area_struct * vma)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
int status;
static ssize_t nfs_file_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
- struct dentry * dentry = iocb->ki_filp->f_dentry;
+ struct dentry * dentry = iocb->ki_filp->f_path.dentry;
struct inode * inode = dentry->d_inode;
ssize_t result;
size_t count = iov_length(iov, nr_segs);
static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl)
{
dprintk("NFS: nfs_flock(f=%s/%ld, t=%x, fl=%x)\n",
- filp->f_dentry->d_inode->i_sb->s_id,
- filp->f_dentry->d_inode->i_ino,
+ filp->f_path.dentry->d_inode->i_sb->s_id,
+ filp->f_path.dentry->d_inode->i_ino,
fl->fl_type, fl->fl_flags);
/*
#include <linux/nfs_idmap.h>
#include <linux/vfs.h>
#include <linux/namei.h>
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include <linux/security.h>
#include <asm/system.h>
static ssize_t
idmap_pipe_downcall(struct file *filp, const char __user *src, size_t mlen)
{
- struct rpc_inode *rpci = RPC_I(filp->f_dentry->d_inode);
+ struct rpc_inode *rpci = RPC_I(filp->f_path.dentry->d_inode);
struct idmap *idmap = (struct idmap *)rpci->private;
struct idmap_msg im_in, *im = &idmap->idmap_im;
struct idmap_hashtable *h;
*/
static void nfs_file_set_open_context(struct file *filp, struct nfs_open_context *ctx)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct nfs_inode *nfsi = NFS_I(inode);
filp->private_data = get_nfs_open_context(ctx);
static void nfs_file_clear_open_context(struct file *filp)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct nfs_open_context *ctx = (struct nfs_open_context *)filp->private_data;
if (ctx) {
cred = rpcauth_lookupcred(NFS_CLIENT(inode)->cl_auth, 0);
if (IS_ERR(cred))
return PTR_ERR(cred);
- ctx = alloc_nfs_open_context(filp->f_vfsmnt, filp->f_dentry, cred);
+ ctx = alloc_nfs_open_context(filp->f_path.mnt, filp->f_path.dentry, cred);
put_rpccred(cred);
if (ctx == NULL)
return -ENOMEM;
static int
nfs3_proc_lock(struct file *filp, int cmd, struct file_lock *fl)
{
- return nlmclnt_proc(filp->f_dentry->d_inode, cmd, fl);
+ return nlmclnt_proc(filp->f_path.dentry->d_inode, cmd, fl);
}
const struct nfs_rpc_ops nfs_v3_clientops = {
struct nfs_server *server = NFS_SERVER(dir->d_inode);
struct unlink_desc *up;
- up = (struct unlink_desc *) kmalloc(sizeof(*up), GFP_KERNEL);
+ up = kmalloc(sizeof(*up), GFP_KERNEL);
if (!up)
return -ENOMEM;
static int
nfs_proc_lock(struct file *filp, int cmd, struct file_lock *fl)
{
- return nlmclnt_proc(filp->f_dentry->d_inode, cmd, fl);
+ return nlmclnt_proc(filp->f_path.dentry->d_inode, cmd, fl);
}
nfs_inc_stats(inode, NFSIOS_VFSUPDATEPAGE);
dprintk("NFS: nfs_updatepage(%s/%s %d@%Ld)\n",
- file->f_dentry->d_parent->d_name.name,
- file->f_dentry->d_name.name, count,
+ file->f_path.dentry->d_parent->d_name.name,
+ file->f_path.dentry->d_name.name, count,
(long long)(page_offset(page) +offset));
/* If we're not using byte range locks, and we know the page
key.ex_dentry = dentry;
exp = svc_export_lookup(&key);
- if (exp != NULL)
- switch (cache_check(&svc_export_cache, &exp->h, reqp)) {
+ if (exp != NULL) {
+ int err;
+
+ err = cache_check(&svc_export_cache, &exp->h, reqp);
+ switch (err) {
case 0: break;
case -EAGAIN:
- exp = ERR_PTR(-EAGAIN);
+ case -ETIMEDOUT:
+ exp = ERR_PTR(err);
break;
default:
exp = NULL;
}
+ }
return exp;
}
exp = exp_get_by_name(clp, nd.mnt, nd.dentry, NULL);
+ memset(&new, 0, sizeof(new));
+
/* must make sure there won't be an ex_fsid clash */
if ((nxp->ex_flags & NFSEXP_FSID) &&
(fsid_key = exp_get_fsid_key(clp, nxp->ex_dev)) &&
new.h.expiry_time = NEVER;
new.h.flags = 0;
+ new.ex_path = kstrdup(nxp->ex_path, GFP_KERNEL);
+ if (!new.ex_path)
+ goto finish;
new.ex_client = clp;
new.ex_mnt = nd.mnt;
new.ex_dentry = nd.dentry;
/* failed to create at least one index */
exp_do_unexport(exp);
cache_flush();
- err = -ENOMEM;
- }
-
+ } else
+ err = 0;
finish:
+ if (new.ex_path)
+ kfree(new.ex_path);
if (exp)
exp_put(exp);
if (fsid_key && !IS_ERR(fsid_key))
path, nd.dentry, clp->name,
inode->i_sb->s_id, inode->i_ino);
exp = exp_parent(clp, nd.mnt, nd.dentry, NULL);
+ if (IS_ERR(exp)) {
+ err = PTR_ERR(exp);
+ goto out;
+ }
if (!exp) {
dprintk("nfsd: exp_rootfh export not found.\n");
goto out;
mk_fsid_v1(fsidv, 0);
exp = exp_find(clp, 1, fsidv, creq);
- if (IS_ERR(exp) && PTR_ERR(exp) == -EAGAIN)
- return nfserr_dropit;
+ if (IS_ERR(exp))
+ return nfserrno(PTR_ERR(exp));
if (exp == NULL)
return nfserr_perm;
- else if (IS_ERR(exp))
- return nfserrno(PTR_ERR(exp));
rv = fh_compose(fhp, exp, exp->ex_dentry, NULL);
exp_put(exp);
return rv;
/*
* Note: we hold the dentry use count while the file is open.
*/
-static u32
+static __be32
nlm_fopen(struct svc_rqst *rqstp, struct nfs_fh *f, struct file **filp)
{
__be32 nfserr;
{
struct dentry *dentry = resp->fh.fh_dentry;
struct inode *inode = dentry->d_inode;
- int w = nfsacl_size(
- (resp->mask & NFS_ACL) ? resp->acl_access : NULL,
- (resp->mask & NFS_DFACL) ? resp->acl_default : NULL);
struct kvec *head = rqstp->rq_res.head;
unsigned int base;
int n;
+ int w;
if (dentry == NULL || dentry->d_inode == NULL)
return 0;
return 0;
base = (char *)p - (char *)head->iov_base;
- rqstp->rq_res.page_len = w;
+ rqstp->rq_res.page_len = w = nfsacl_size(
+ (resp->mask & NFS_ACL) ? resp->acl_access : NULL,
+ (resp->mask & NFS_DFACL) ? resp->acl_default : NULL);
while (w > 0) {
if (!rqstp->rq_respages[rqstp->rq_resused++])
return 0;
p = nfs3svc_encode_post_op_attr(rqstp, p, &resp->fh);
if (resp->status == 0 && dentry && dentry->d_inode) {
struct inode *inode = dentry->d_inode;
- int w = nfsacl_size(
- (resp->mask & NFS_ACL) ? resp->acl_access : NULL,
- (resp->mask & NFS_DFACL) ? resp->acl_default : NULL);
struct kvec *head = rqstp->rq_res.head;
unsigned int base;
int n;
+ int w;
*p++ = htonl(resp->mask);
if (!xdr_ressize_check(rqstp, p))
return 0;
base = (char *)p - (char *)head->iov_base;
- rqstp->rq_res.page_len = w;
+ rqstp->rq_res.page_len = w = nfsacl_size(
+ (resp->mask & NFS_ACL) ? resp->acl_access : NULL,
+ (resp->mask & NFS_DFACL) ? resp->acl_default : NULL);
while (w > 0) {
if (!rqstp->rq_respages[rqstp->rq_resused++])
return 0;
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Note: some routines in this file are just trivial wrappers
- * (e.g. nfsd4_lookup()) defined solely for the sake of consistent
- * naming. Since all such routines have been declared "inline",
- * there shouldn't be any associated overhead. At some point in
- * the future, I might inline these "by hand" to clean up a
- * little.
*/
#include <linux/param.h>
}
-static inline __be32
-nfsd4_open(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_open *open, struct nfs4_stateowner **replay_owner)
+static __be32
+nfsd4_open(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_open *open)
{
__be32 status;
dprintk("NFSD: nfsd4_open filename %.*s op_stateowner %p\n",
status = nfsd4_process_open1(open);
if (status == nfserr_replay_me) {
struct nfs4_replay *rp = &open->op_stateowner->so_replay;
- fh_put(current_fh);
- current_fh->fh_handle.fh_size = rp->rp_openfh_len;
- memcpy(¤t_fh->fh_handle.fh_base, rp->rp_openfh,
+ fh_put(&cstate->current_fh);
+ cstate->current_fh.fh_handle.fh_size = rp->rp_openfh_len;
+ memcpy(&cstate->current_fh.fh_handle.fh_base, rp->rp_openfh,
rp->rp_openfh_len);
- status = fh_verify(rqstp, current_fh, 0, MAY_NOP);
+ status = fh_verify(rqstp, &cstate->current_fh, 0, MAY_NOP);
if (status)
dprintk("nfsd4_open: replay failed"
" restoring previous filehandle\n");
* (3) set open->op_truncate if the file is to be
* truncated after opening, (4) do permission checking.
*/
- status = do_open_lookup(rqstp, current_fh, open);
+ status = do_open_lookup(rqstp, &cstate->current_fh,
+ open);
if (status)
goto out;
break;
* open->op_truncate if the file is to be truncated
* after opening, (3) do permission checking.
*/
- status = do_open_fhandle(rqstp, current_fh, open);
+ status = do_open_fhandle(rqstp, &cstate->current_fh,
+ open);
if (status)
goto out;
break;
* successful, it (1) truncates the file if open->op_truncate was
* set, (2) sets open->op_stateid, (3) sets open->op_delegation.
*/
- status = nfsd4_process_open2(rqstp, current_fh, open);
+ status = nfsd4_process_open2(rqstp, &cstate->current_fh, open);
out:
if (open->op_stateowner) {
nfs4_get_stateowner(open->op_stateowner);
- *replay_owner = open->op_stateowner;
+ cstate->replay_owner = open->op_stateowner;
}
nfs4_unlock_state();
return status;
/*
* filehandle-manipulating ops.
*/
-static inline __be32
-nfsd4_getfh(struct svc_fh *current_fh, struct svc_fh **getfh)
+static __be32
+nfsd4_getfh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct svc_fh **getfh)
{
- if (!current_fh->fh_dentry)
+ if (!cstate->current_fh.fh_dentry)
return nfserr_nofilehandle;
- *getfh = current_fh;
+ *getfh = &cstate->current_fh;
return nfs_ok;
}
-static inline __be32
-nfsd4_putfh(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_putfh *putfh)
+static __be32
+nfsd4_putfh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_putfh *putfh)
{
- fh_put(current_fh);
- current_fh->fh_handle.fh_size = putfh->pf_fhlen;
- memcpy(¤t_fh->fh_handle.fh_base, putfh->pf_fhval, putfh->pf_fhlen);
- return fh_verify(rqstp, current_fh, 0, MAY_NOP);
+ fh_put(&cstate->current_fh);
+ cstate->current_fh.fh_handle.fh_size = putfh->pf_fhlen;
+ memcpy(&cstate->current_fh.fh_handle.fh_base, putfh->pf_fhval,
+ putfh->pf_fhlen);
+ return fh_verify(rqstp, &cstate->current_fh, 0, MAY_NOP);
}
-static inline __be32
-nfsd4_putrootfh(struct svc_rqst *rqstp, struct svc_fh *current_fh)
+static __be32
+nfsd4_putrootfh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ void *arg)
{
__be32 status;
- fh_put(current_fh);
- status = exp_pseudoroot(rqstp->rq_client, current_fh,
+ fh_put(&cstate->current_fh);
+ status = exp_pseudoroot(rqstp->rq_client, &cstate->current_fh,
&rqstp->rq_chandle);
return status;
}
-static inline __be32
-nfsd4_restorefh(struct svc_fh *current_fh, struct svc_fh *save_fh)
+static __be32
+nfsd4_restorefh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ void *arg)
{
- if (!save_fh->fh_dentry)
+ if (!cstate->save_fh.fh_dentry)
return nfserr_restorefh;
- fh_dup2(current_fh, save_fh);
+ fh_dup2(&cstate->current_fh, &cstate->save_fh);
return nfs_ok;
}
-static inline __be32
-nfsd4_savefh(struct svc_fh *current_fh, struct svc_fh *save_fh)
+static __be32
+nfsd4_savefh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ void *arg)
{
- if (!current_fh->fh_dentry)
+ if (!cstate->current_fh.fh_dentry)
return nfserr_nofilehandle;
- fh_dup2(save_fh, current_fh);
+ fh_dup2(&cstate->save_fh, &cstate->current_fh);
return nfs_ok;
}
/*
* misc nfsv4 ops
*/
-static inline __be32
-nfsd4_access(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_access *access)
+static __be32
+nfsd4_access(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_access *access)
{
if (access->ac_req_access & ~NFS3_ACCESS_FULL)
return nfserr_inval;
access->ac_resp_access = access->ac_req_access;
- return nfsd_access(rqstp, current_fh, &access->ac_resp_access, &access->ac_supported);
+ return nfsd_access(rqstp, &cstate->current_fh, &access->ac_resp_access,
+ &access->ac_supported);
}
-static inline __be32
-nfsd4_commit(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_commit *commit)
+static __be32
+nfsd4_commit(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_commit *commit)
{
__be32 status;
*p++ = nfssvc_boot.tv_sec;
*p++ = nfssvc_boot.tv_usec;
- status = nfsd_commit(rqstp, current_fh, commit->co_offset, commit->co_count);
+ status = nfsd_commit(rqstp, &cstate->current_fh, commit->co_offset,
+ commit->co_count);
if (status == nfserr_symlink)
status = nfserr_inval;
return status;
}
static __be32
-nfsd4_create(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_create *create)
+nfsd4_create(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_create *create)
{
struct svc_fh resfh;
__be32 status;
fh_init(&resfh, NFS4_FHSIZE);
- status = fh_verify(rqstp, current_fh, S_IFDIR, MAY_CREATE);
+ status = fh_verify(rqstp, &cstate->current_fh, S_IFDIR, MAY_CREATE);
if (status == nfserr_symlink)
status = nfserr_notdir;
if (status)
*/
create->cr_linkname[create->cr_linklen] = 0;
- status = nfsd_symlink(rqstp, current_fh, create->cr_name,
- create->cr_namelen, create->cr_linkname,
- create->cr_linklen, &resfh, &create->cr_iattr);
+ status = nfsd_symlink(rqstp, &cstate->current_fh,
+ create->cr_name, create->cr_namelen,
+ create->cr_linkname, create->cr_linklen,
+ &resfh, &create->cr_iattr);
break;
case NF4BLK:
if (MAJOR(rdev) != create->cr_specdata1 ||
MINOR(rdev) != create->cr_specdata2)
return nfserr_inval;
- status = nfsd_create(rqstp, current_fh, create->cr_name,
- create->cr_namelen, &create->cr_iattr,
- S_IFBLK, rdev, &resfh);
+ status = nfsd_create(rqstp, &cstate->current_fh,
+ create->cr_name, create->cr_namelen,
+ &create->cr_iattr, S_IFBLK, rdev, &resfh);
break;
case NF4CHR:
if (MAJOR(rdev) != create->cr_specdata1 ||
MINOR(rdev) != create->cr_specdata2)
return nfserr_inval;
- status = nfsd_create(rqstp, current_fh, create->cr_name,
- create->cr_namelen, &create->cr_iattr,
- S_IFCHR, rdev, &resfh);
+ status = nfsd_create(rqstp, &cstate->current_fh,
+ create->cr_name, create->cr_namelen,
+ &create->cr_iattr,S_IFCHR, rdev, &resfh);
break;
case NF4SOCK:
- status = nfsd_create(rqstp, current_fh, create->cr_name,
- create->cr_namelen, &create->cr_iattr,
- S_IFSOCK, 0, &resfh);
+ status = nfsd_create(rqstp, &cstate->current_fh,
+ create->cr_name, create->cr_namelen,
+ &create->cr_iattr, S_IFSOCK, 0, &resfh);
break;
case NF4FIFO:
- status = nfsd_create(rqstp, current_fh, create->cr_name,
- create->cr_namelen, &create->cr_iattr,
- S_IFIFO, 0, &resfh);
+ status = nfsd_create(rqstp, &cstate->current_fh,
+ create->cr_name, create->cr_namelen,
+ &create->cr_iattr, S_IFIFO, 0, &resfh);
break;
case NF4DIR:
create->cr_iattr.ia_valid &= ~ATTR_SIZE;
- status = nfsd_create(rqstp, current_fh, create->cr_name,
- create->cr_namelen, &create->cr_iattr,
- S_IFDIR, 0, &resfh);
+ status = nfsd_create(rqstp, &cstate->current_fh,
+ create->cr_name, create->cr_namelen,
+ &create->cr_iattr, S_IFDIR, 0, &resfh);
break;
default:
}
if (!status) {
- fh_unlock(current_fh);
- set_change_info(&create->cr_cinfo, current_fh);
- fh_dup2(current_fh, &resfh);
+ fh_unlock(&cstate->current_fh);
+ set_change_info(&create->cr_cinfo, &cstate->current_fh);
+ fh_dup2(&cstate->current_fh, &resfh);
}
fh_put(&resfh);
return status;
}
-static inline __be32
-nfsd4_getattr(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_getattr *getattr)
+static __be32
+nfsd4_getattr(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_getattr *getattr)
{
__be32 status;
- status = fh_verify(rqstp, current_fh, 0, MAY_NOP);
+ status = fh_verify(rqstp, &cstate->current_fh, 0, MAY_NOP);
if (status)
return status;
getattr->ga_bmval[0] &= NFSD_SUPPORTED_ATTRS_WORD0;
getattr->ga_bmval[1] &= NFSD_SUPPORTED_ATTRS_WORD1;
- getattr->ga_fhp = current_fh;
+ getattr->ga_fhp = &cstate->current_fh;
return nfs_ok;
}
-static inline __be32
-nfsd4_link(struct svc_rqst *rqstp, struct svc_fh *current_fh,
- struct svc_fh *save_fh, struct nfsd4_link *link)
+static __be32
+nfsd4_link(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_link *link)
{
__be32 status = nfserr_nofilehandle;
- if (!save_fh->fh_dentry)
+ if (!cstate->save_fh.fh_dentry)
return status;
- status = nfsd_link(rqstp, current_fh, link->li_name, link->li_namelen, save_fh);
+ status = nfsd_link(rqstp, &cstate->current_fh,
+ link->li_name, link->li_namelen, &cstate->save_fh);
if (!status)
- set_change_info(&link->li_cinfo, current_fh);
+ set_change_info(&link->li_cinfo, &cstate->current_fh);
return status;
}
static __be32
-nfsd4_lookupp(struct svc_rqst *rqstp, struct svc_fh *current_fh)
+nfsd4_lookupp(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ void *arg)
{
struct svc_fh tmp_fh;
__be32 ret;
if((ret = exp_pseudoroot(rqstp->rq_client, &tmp_fh,
&rqstp->rq_chandle)) != 0)
return ret;
- if (tmp_fh.fh_dentry == current_fh->fh_dentry) {
+ if (tmp_fh.fh_dentry == cstate->current_fh.fh_dentry) {
fh_put(&tmp_fh);
return nfserr_noent;
}
fh_put(&tmp_fh);
- return nfsd_lookup(rqstp, current_fh, "..", 2, current_fh);
+ return nfsd_lookup(rqstp, &cstate->current_fh,
+ "..", 2, &cstate->current_fh);
}
-static inline __be32
-nfsd4_lookup(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_lookup *lookup)
+static __be32
+nfsd4_lookup(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_lookup *lookup)
{
- return nfsd_lookup(rqstp, current_fh, lookup->lo_name, lookup->lo_len, current_fh);
+ return nfsd_lookup(rqstp, &cstate->current_fh,
+ lookup->lo_name, lookup->lo_len,
+ &cstate->current_fh);
}
-static inline __be32
-nfsd4_read(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_read *read)
+static __be32
+nfsd4_read(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_read *read)
{
__be32 status;
nfs4_lock_state();
/* check stateid */
- if ((status = nfs4_preprocess_stateid_op(current_fh, &read->rd_stateid,
+ if ((status = nfs4_preprocess_stateid_op(&cstate->current_fh,
+ &read->rd_stateid,
CHECK_FH | RD_STATE, &read->rd_filp))) {
dprintk("NFSD: nfsd4_read: couldn't process stateid!\n");
goto out;
out:
nfs4_unlock_state();
read->rd_rqstp = rqstp;
- read->rd_fhp = current_fh;
+ read->rd_fhp = &cstate->current_fh;
return status;
}
-static inline __be32
-nfsd4_readdir(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_readdir *readdir)
+static __be32
+nfsd4_readdir(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_readdir *readdir)
{
u64 cookie = readdir->rd_cookie;
static const nfs4_verifier zeroverf;
return nfserr_bad_cookie;
readdir->rd_rqstp = rqstp;
- readdir->rd_fhp = current_fh;
+ readdir->rd_fhp = &cstate->current_fh;
return nfs_ok;
}
-static inline __be32
-nfsd4_readlink(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_readlink *readlink)
+static __be32
+nfsd4_readlink(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_readlink *readlink)
{
readlink->rl_rqstp = rqstp;
- readlink->rl_fhp = current_fh;
+ readlink->rl_fhp = &cstate->current_fh;
return nfs_ok;
}
-static inline __be32
-nfsd4_remove(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_remove *remove)
+static __be32
+nfsd4_remove(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_remove *remove)
{
__be32 status;
if (nfs4_in_grace())
return nfserr_grace;
- status = nfsd_unlink(rqstp, current_fh, 0, remove->rm_name, remove->rm_namelen);
+ status = nfsd_unlink(rqstp, &cstate->current_fh, 0,
+ remove->rm_name, remove->rm_namelen);
if (status == nfserr_symlink)
return nfserr_notdir;
if (!status) {
- fh_unlock(current_fh);
- set_change_info(&remove->rm_cinfo, current_fh);
+ fh_unlock(&cstate->current_fh);
+ set_change_info(&remove->rm_cinfo, &cstate->current_fh);
}
return status;
}
-static inline __be32
-nfsd4_rename(struct svc_rqst *rqstp, struct svc_fh *current_fh,
- struct svc_fh *save_fh, struct nfsd4_rename *rename)
+static __be32
+nfsd4_rename(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_rename *rename)
{
__be32 status = nfserr_nofilehandle;
- if (!save_fh->fh_dentry)
+ if (!cstate->save_fh.fh_dentry)
return status;
- if (nfs4_in_grace() && !(save_fh->fh_export->ex_flags
+ if (nfs4_in_grace() && !(cstate->save_fh.fh_export->ex_flags
& NFSEXP_NOSUBTREECHECK))
return nfserr_grace;
- status = nfsd_rename(rqstp, save_fh, rename->rn_sname,
- rename->rn_snamelen, current_fh,
+ status = nfsd_rename(rqstp, &cstate->save_fh, rename->rn_sname,
+ rename->rn_snamelen, &cstate->current_fh,
rename->rn_tname, rename->rn_tnamelen);
/* the underlying filesystem returns different error's than required
if (status == nfserr_isdir)
status = nfserr_exist;
else if ((status == nfserr_notdir) &&
- (S_ISDIR(save_fh->fh_dentry->d_inode->i_mode) &&
- S_ISDIR(current_fh->fh_dentry->d_inode->i_mode)))
+ (S_ISDIR(cstate->save_fh.fh_dentry->d_inode->i_mode) &&
+ S_ISDIR(cstate->current_fh.fh_dentry->d_inode->i_mode)))
status = nfserr_exist;
else if (status == nfserr_symlink)
status = nfserr_notdir;
if (!status) {
- set_change_info(&rename->rn_sinfo, current_fh);
- set_change_info(&rename->rn_tinfo, save_fh);
+ set_change_info(&rename->rn_sinfo, &cstate->current_fh);
+ set_change_info(&rename->rn_tinfo, &cstate->save_fh);
}
return status;
}
-static inline __be32
-nfsd4_setattr(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_setattr *setattr)
+static __be32
+nfsd4_setattr(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_setattr *setattr)
{
__be32 status = nfs_ok;
if (setattr->sa_iattr.ia_valid & ATTR_SIZE) {
nfs4_lock_state();
- status = nfs4_preprocess_stateid_op(current_fh,
+ status = nfs4_preprocess_stateid_op(&cstate->current_fh,
&setattr->sa_stateid, CHECK_FH | WR_STATE, NULL);
nfs4_unlock_state();
if (status) {
}
status = nfs_ok;
if (setattr->sa_acl != NULL)
- status = nfsd4_set_nfs4_acl(rqstp, current_fh, setattr->sa_acl);
+ status = nfsd4_set_nfs4_acl(rqstp, &cstate->current_fh,
+ setattr->sa_acl);
if (status)
return status;
- status = nfsd_setattr(rqstp, current_fh, &setattr->sa_iattr,
+ status = nfsd_setattr(rqstp, &cstate->current_fh, &setattr->sa_iattr,
0, (time_t)0);
return status;
}
-static inline __be32
-nfsd4_write(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_write *write)
+static __be32
+nfsd4_write(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_write *write)
{
stateid_t *stateid = &write->wr_stateid;
struct file *filp = NULL;
return nfserr_inval;
nfs4_lock_state();
- status = nfs4_preprocess_stateid_op(current_fh, stateid,
+ status = nfs4_preprocess_stateid_op(&cstate->current_fh, stateid,
CHECK_FH | WR_STATE, &filp);
if (filp)
get_file(filp);
*p++ = nfssvc_boot.tv_sec;
*p++ = nfssvc_boot.tv_usec;
- status = nfsd_write(rqstp, current_fh, filp, write->wr_offset,
- rqstp->rq_vec, write->wr_vlen, write->wr_buflen,
- &write->wr_how_written);
+ status = nfsd_write(rqstp, &cstate->current_fh, filp,
+ write->wr_offset, rqstp->rq_vec, write->wr_vlen,
+ write->wr_buflen, &write->wr_how_written);
if (filp)
fput(filp);
* to NFS_OK after the call; NVERIFY by mapping NFSERR_NOT_SAME to NFS_OK.
*/
static __be32
-nfsd4_verify(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_verify *verify)
+_nfsd4_verify(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_verify *verify)
{
__be32 *buf, *p;
int count;
__be32 status;
- status = fh_verify(rqstp, current_fh, 0, MAY_NOP);
+ status = fh_verify(rqstp, &cstate->current_fh, 0, MAY_NOP);
if (status)
return status;
if (!buf)
return nfserr_resource;
- status = nfsd4_encode_fattr(current_fh, current_fh->fh_export,
- current_fh->fh_dentry, buf,
+ status = nfsd4_encode_fattr(&cstate->current_fh,
+ cstate->current_fh.fh_export,
+ cstate->current_fh.fh_dentry, buf,
&count, verify->ve_bmval,
rqstp);
return status;
}
+static __be32
+nfsd4_nverify(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_verify *verify)
+{
+ __be32 status;
+
+ status = _nfsd4_verify(rqstp, cstate, verify);
+ return status == nfserr_not_same ? nfs_ok : status;
+}
+
+static __be32
+nfsd4_verify(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_verify *verify)
+{
+ __be32 status;
+
+ status = _nfsd4_verify(rqstp, cstate, verify);
+ return status == nfserr_same ? nfs_ok : status;
+}
+
/*
* NULL call.
*/
nfsdstats.nfs4_opcount[opnum]++;
}
+static void cstate_free(struct nfsd4_compound_state *cstate)
+{
+ if (cstate == NULL)
+ return;
+ fh_put(&cstate->current_fh);
+ fh_put(&cstate->save_fh);
+ BUG_ON(cstate->replay_owner);
+ kfree(cstate);
+}
+
+static struct nfsd4_compound_state *cstate_alloc(void)
+{
+ struct nfsd4_compound_state *cstate;
+
+ cstate = kmalloc(sizeof(struct nfsd4_compound_state), GFP_KERNEL);
+ if (cstate == NULL)
+ return NULL;
+ fh_init(&cstate->current_fh, NFS4_FHSIZE);
+ fh_init(&cstate->save_fh, NFS4_FHSIZE);
+ cstate->replay_owner = NULL;
+ return cstate;
+}
+
+typedef __be32(*nfsd4op_func)(struct svc_rqst *, struct nfsd4_compound_state *,
+ void *);
+
+struct nfsd4_operation {
+ nfsd4op_func op_func;
+ u32 op_flags;
+/* Most ops require a valid current filehandle; a few don't: */
+#define ALLOWED_WITHOUT_FH 1
+/* GETATTR and ops not listed as returning NFS4ERR_MOVED: */
+#define ALLOWED_ON_ABSENT_FS 2
+};
+
+static struct nfsd4_operation nfsd4_ops[];
/*
* COMPOUND call.
struct nfsd4_compoundres *resp)
{
struct nfsd4_op *op;
- struct svc_fh *current_fh = NULL;
- struct svc_fh *save_fh = NULL;
- struct nfs4_stateowner *replay_owner = NULL;
- int slack_space; /* in words, not bytes! */
+ struct nfsd4_operation *opdesc;
+ struct nfsd4_compound_state *cstate = NULL;
+ int slack_bytes;
__be32 status;
status = nfserr_resource;
- current_fh = kmalloc(sizeof(*current_fh), GFP_KERNEL);
- if (current_fh == NULL)
- goto out;
- fh_init(current_fh, NFS4_FHSIZE);
- save_fh = kmalloc(sizeof(*save_fh), GFP_KERNEL);
- if (save_fh == NULL)
+ cstate = cstate_alloc();
+ if (cstate == NULL)
goto out;
- fh_init(save_fh, NFS4_FHSIZE);
resp->xbuf = &rqstp->rq_res;
resp->p = rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len;
* failed response to the next operation. If we don't
* have enough room, fail with ERR_RESOURCE.
*/
-/* FIXME - is slack_space *really* words, or bytes??? - neilb */
- slack_space = (char *)resp->end - (char *)resp->p;
- if (slack_space < COMPOUND_SLACK_SPACE + COMPOUND_ERR_SLACK_SPACE) {
- BUG_ON(slack_space < COMPOUND_ERR_SLACK_SPACE);
+ slack_bytes = (char *)resp->end - (char *)resp->p;
+ if (slack_bytes < COMPOUND_SLACK_SPACE
+ + COMPOUND_ERR_SLACK_SPACE) {
+ BUG_ON(slack_bytes < COMPOUND_ERR_SLACK_SPACE);
op->status = nfserr_resource;
goto encode_op;
}
- /* All operations except RENEW, SETCLIENTID, RESTOREFH
- * SETCLIENTID_CONFIRM, PUTFH and PUTROOTFH
- * require a valid current filehandle
- */
- if (!current_fh->fh_dentry) {
- if (!((op->opnum == OP_PUTFH) ||
- (op->opnum == OP_PUTROOTFH) ||
- (op->opnum == OP_SETCLIENTID) ||
- (op->opnum == OP_SETCLIENTID_CONFIRM) ||
- (op->opnum == OP_RENEW) ||
- (op->opnum == OP_RESTOREFH) ||
- (op->opnum == OP_RELEASE_LOCKOWNER))) {
+ opdesc = &nfsd4_ops[op->opnum];
+
+ if (!cstate->current_fh.fh_dentry) {
+ if (!(opdesc->op_flags & ALLOWED_WITHOUT_FH)) {
op->status = nfserr_nofilehandle;
goto encode_op;
}
- }
- /* Check must be done at start of each operation, except
- * for GETATTR and ops not listed as returning NFS4ERR_MOVED
- */
- else if (current_fh->fh_export->ex_fslocs.migrated &&
- !((op->opnum == OP_GETATTR) ||
- (op->opnum == OP_PUTROOTFH) ||
- (op->opnum == OP_PUTPUBFH) ||
- (op->opnum == OP_RENEW) ||
- (op->opnum == OP_SETCLIENTID) ||
- (op->opnum == OP_RELEASE_LOCKOWNER))) {
+ } else if (cstate->current_fh.fh_export->ex_fslocs.migrated &&
+ !(opdesc->op_flags & ALLOWED_ON_ABSENT_FS)) {
op->status = nfserr_moved;
goto encode_op;
}
- switch (op->opnum) {
- case OP_ACCESS:
- op->status = nfsd4_access(rqstp, current_fh, &op->u.access);
- break;
- case OP_CLOSE:
- op->status = nfsd4_close(rqstp, current_fh, &op->u.close, &replay_owner);
- break;
- case OP_COMMIT:
- op->status = nfsd4_commit(rqstp, current_fh, &op->u.commit);
- break;
- case OP_CREATE:
- op->status = nfsd4_create(rqstp, current_fh, &op->u.create);
- break;
- case OP_DELEGRETURN:
- op->status = nfsd4_delegreturn(rqstp, current_fh, &op->u.delegreturn);
- break;
- case OP_GETATTR:
- op->status = nfsd4_getattr(rqstp, current_fh, &op->u.getattr);
- break;
- case OP_GETFH:
- op->status = nfsd4_getfh(current_fh, &op->u.getfh);
- break;
- case OP_LINK:
- op->status = nfsd4_link(rqstp, current_fh, save_fh, &op->u.link);
- break;
- case OP_LOCK:
- op->status = nfsd4_lock(rqstp, current_fh, &op->u.lock, &replay_owner);
- break;
- case OP_LOCKT:
- op->status = nfsd4_lockt(rqstp, current_fh, &op->u.lockt);
- break;
- case OP_LOCKU:
- op->status = nfsd4_locku(rqstp, current_fh, &op->u.locku, &replay_owner);
- break;
- case OP_LOOKUP:
- op->status = nfsd4_lookup(rqstp, current_fh, &op->u.lookup);
- break;
- case OP_LOOKUPP:
- op->status = nfsd4_lookupp(rqstp, current_fh);
- break;
- case OP_NVERIFY:
- op->status = nfsd4_verify(rqstp, current_fh, &op->u.nverify);
- if (op->status == nfserr_not_same)
- op->status = nfs_ok;
- break;
- case OP_OPEN:
- op->status = nfsd4_open(rqstp, current_fh, &op->u.open, &replay_owner);
- break;
- case OP_OPEN_CONFIRM:
- op->status = nfsd4_open_confirm(rqstp, current_fh, &op->u.open_confirm, &replay_owner);
- break;
- case OP_OPEN_DOWNGRADE:
- op->status = nfsd4_open_downgrade(rqstp, current_fh, &op->u.open_downgrade, &replay_owner);
- break;
- case OP_PUTFH:
- op->status = nfsd4_putfh(rqstp, current_fh, &op->u.putfh);
- break;
- case OP_PUTROOTFH:
- op->status = nfsd4_putrootfh(rqstp, current_fh);
- break;
- case OP_READ:
- op->status = nfsd4_read(rqstp, current_fh, &op->u.read);
- break;
- case OP_READDIR:
- op->status = nfsd4_readdir(rqstp, current_fh, &op->u.readdir);
- break;
- case OP_READLINK:
- op->status = nfsd4_readlink(rqstp, current_fh, &op->u.readlink);
- break;
- case OP_REMOVE:
- op->status = nfsd4_remove(rqstp, current_fh, &op->u.remove);
- break;
- case OP_RENAME:
- op->status = nfsd4_rename(rqstp, current_fh, save_fh, &op->u.rename);
- break;
- case OP_RENEW:
- op->status = nfsd4_renew(&op->u.renew);
- break;
- case OP_RESTOREFH:
- op->status = nfsd4_restorefh(current_fh, save_fh);
- break;
- case OP_SAVEFH:
- op->status = nfsd4_savefh(current_fh, save_fh);
- break;
- case OP_SETATTR:
- op->status = nfsd4_setattr(rqstp, current_fh, &op->u.setattr);
- break;
- case OP_SETCLIENTID:
- op->status = nfsd4_setclientid(rqstp, &op->u.setclientid);
- break;
- case OP_SETCLIENTID_CONFIRM:
- op->status = nfsd4_setclientid_confirm(rqstp, &op->u.setclientid_confirm);
- break;
- case OP_VERIFY:
- op->status = nfsd4_verify(rqstp, current_fh, &op->u.verify);
- if (op->status == nfserr_same)
- op->status = nfs_ok;
- break;
- case OP_WRITE:
- op->status = nfsd4_write(rqstp, current_fh, &op->u.write);
- break;
- case OP_RELEASE_LOCKOWNER:
- op->status = nfsd4_release_lockowner(rqstp, &op->u.release_lockowner);
- break;
- default:
+
+ if (opdesc->op_func)
+ op->status = opdesc->op_func(rqstp, cstate, &op->u);
+ else
BUG_ON(op->status == nfs_ok);
- break;
- }
encode_op:
if (op->status == nfserr_replay_me) {
- op->replay = &replay_owner->so_replay;
+ op->replay = &cstate->replay_owner->so_replay;
nfsd4_encode_replay(resp, op);
status = op->status = op->replay->rp_status;
} else {
nfsd4_encode_operation(resp, op);
status = op->status;
}
- if (replay_owner && (replay_owner != (void *)(-1))) {
- nfs4_put_stateowner(replay_owner);
- replay_owner = NULL;
+ if (cstate->replay_owner) {
+ nfs4_put_stateowner(cstate->replay_owner);
+ cstate->replay_owner = NULL;
}
/* XXX Ugh, we need to get rid of this kind of special case: */
if (op->opnum == OP_READ && op->u.read.rd_filp)
out:
nfsd4_release_compoundargs(args);
- if (current_fh)
- fh_put(current_fh);
- kfree(current_fh);
- if (save_fh)
- fh_put(save_fh);
- kfree(save_fh);
+ cstate_free(cstate);
return status;
}
+static struct nfsd4_operation nfsd4_ops[OP_RELEASE_LOCKOWNER+1] = {
+ [OP_ACCESS] = {
+ .op_func = (nfsd4op_func)nfsd4_access,
+ },
+ [OP_CLOSE] = {
+ .op_func = (nfsd4op_func)nfsd4_close,
+ },
+ [OP_COMMIT] = {
+ .op_func = (nfsd4op_func)nfsd4_commit,
+ },
+ [OP_CREATE] = {
+ .op_func = (nfsd4op_func)nfsd4_create,
+ },
+ [OP_DELEGRETURN] = {
+ .op_func = (nfsd4op_func)nfsd4_delegreturn,
+ },
+ [OP_GETATTR] = {
+ .op_func = (nfsd4op_func)nfsd4_getattr,
+ .op_flags = ALLOWED_ON_ABSENT_FS,
+ },
+ [OP_GETFH] = {
+ .op_func = (nfsd4op_func)nfsd4_getfh,
+ },
+ [OP_LINK] = {
+ .op_func = (nfsd4op_func)nfsd4_link,
+ },
+ [OP_LOCK] = {
+ .op_func = (nfsd4op_func)nfsd4_lock,
+ },
+ [OP_LOCKT] = {
+ .op_func = (nfsd4op_func)nfsd4_lockt,
+ },
+ [OP_LOCKU] = {
+ .op_func = (nfsd4op_func)nfsd4_locku,
+ },
+ [OP_LOOKUP] = {
+ .op_func = (nfsd4op_func)nfsd4_lookup,
+ },
+ [OP_LOOKUPP] = {
+ .op_func = (nfsd4op_func)nfsd4_lookupp,
+ },
+ [OP_NVERIFY] = {
+ .op_func = (nfsd4op_func)nfsd4_nverify,
+ },
+ [OP_OPEN] = {
+ .op_func = (nfsd4op_func)nfsd4_open,
+ },
+ [OP_OPEN_CONFIRM] = {
+ .op_func = (nfsd4op_func)nfsd4_open_confirm,
+ },
+ [OP_OPEN_DOWNGRADE] = {
+ .op_func = (nfsd4op_func)nfsd4_open_downgrade,
+ },
+ [OP_PUTFH] = {
+ .op_func = (nfsd4op_func)nfsd4_putfh,
+ .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS,
+ },
+ [OP_PUTPUBFH] = {
+ /* unsupported; just for future reference: */
+ .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS,
+ },
+ [OP_PUTROOTFH] = {
+ .op_func = (nfsd4op_func)nfsd4_putrootfh,
+ .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS,
+ },
+ [OP_READ] = {
+ .op_func = (nfsd4op_func)nfsd4_read,
+ },
+ [OP_READDIR] = {
+ .op_func = (nfsd4op_func)nfsd4_readdir,
+ },
+ [OP_READLINK] = {
+ .op_func = (nfsd4op_func)nfsd4_readlink,
+ },
+ [OP_REMOVE] = {
+ .op_func = (nfsd4op_func)nfsd4_remove,
+ },
+ [OP_RENAME] = {
+ .op_func = (nfsd4op_func)nfsd4_rename,
+ },
+ [OP_RENEW] = {
+ .op_func = (nfsd4op_func)nfsd4_renew,
+ .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS,
+ },
+ [OP_RESTOREFH] = {
+ .op_func = (nfsd4op_func)nfsd4_restorefh,
+ .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS,
+ },
+ [OP_SAVEFH] = {
+ .op_func = (nfsd4op_func)nfsd4_savefh,
+ },
+ [OP_SETATTR] = {
+ .op_func = (nfsd4op_func)nfsd4_setattr,
+ },
+ [OP_SETCLIENTID] = {
+ .op_func = (nfsd4op_func)nfsd4_setclientid,
+ .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS,
+ },
+ [OP_SETCLIENTID_CONFIRM] = {
+ .op_func = (nfsd4op_func)nfsd4_setclientid_confirm,
+ .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS,
+ },
+ [OP_VERIFY] = {
+ .op_func = (nfsd4op_func)nfsd4_verify,
+ },
+ [OP_WRITE] = {
+ .op_func = (nfsd4op_func)nfsd4_write,
+ },
+ [OP_RELEASE_LOCKOWNER] = {
+ .op_func = (nfsd4op_func)nfsd4_release_lockowner,
+ .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS,
+ },
+};
+
#define nfs4svc_decode_voidargs NULL
#define nfs4svc_release_void NULL
#define nfsd4_voidres nfsd4_voidargs
printk("nfsd4: non-file found in client recovery directory\n");
return -EINVAL;
}
- mutex_lock(&dir->d_inode->i_mutex);
+ mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
status = vfs_unlink(dir->d_inode, dentry);
mutex_unlock(&dir->d_inode->i_mutex);
return status;
*
*/
__be32
-nfsd4_setclientid(struct svc_rqst *rqstp, struct nfsd4_setclientid *setclid)
+nfsd4_setclientid(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_setclientid *setclid)
{
__be32 ip_addr = rqstp->rq_addr.sin_addr.s_addr;
struct xdr_netobj clname = {
* NOTE: callback information will be processed here in a future patch
*/
__be32
-nfsd4_setclientid_confirm(struct svc_rqst *rqstp, struct nfsd4_setclientid_confirm *setclientid_confirm)
+nfsd4_setclientid_confirm(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *cstate,
+ struct nfsd4_setclientid_confirm *setclientid_confirm)
{
__be32 ip_addr = rqstp->rq_addr.sin_addr.s_addr;
struct nfs4_client *conf, *unconf;
nfs4_file_downgrade(struct file *filp, unsigned int share_access)
{
if (share_access & NFS4_SHARE_ACCESS_WRITE) {
- put_write_access(filp->f_dentry->d_inode);
+ put_write_access(filp->f_path.dentry->d_inode);
filp->f_mode = (filp->f_mode | FMODE_READ) & ~FMODE_WRITE;
}
}
nfs4_upgrade_open(struct svc_rqst *rqstp, struct svc_fh *cur_fh, struct nfs4_stateid *stp, struct nfsd4_open *open)
{
struct file *filp = stp->st_vfs_file;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
unsigned int share_access, new_writer;
__be32 status;
static DECLARE_DELAYED_WORK(laundromat_work, laundromat_main);
__be32
-nfsd4_renew(clientid_t *clid)
+nfsd4_renew(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ clientid_t *clid)
{
struct nfs4_client *clp;
__be32 status;
static inline int
nfs4_check_fh(struct svc_fh *fhp, struct nfs4_stateid *stp)
{
- return fhp->fh_dentry->d_inode != stp->st_vfs_file->f_dentry->d_inode;
+ return fhp->fh_dentry->d_inode != stp->st_vfs_file->f_path.dentry->d_inode;
}
static int
}
__be32
-nfsd4_open_confirm(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_open_confirm *oc, struct nfs4_stateowner **replay_owner)
+nfsd4_open_confirm(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_open_confirm *oc)
{
__be32 status;
struct nfs4_stateowner *sop;
struct nfs4_stateid *stp;
dprintk("NFSD: nfsd4_open_confirm on file %.*s\n",
- (int)current_fh->fh_dentry->d_name.len,
- current_fh->fh_dentry->d_name.name);
+ (int)cstate->current_fh.fh_dentry->d_name.len,
+ cstate->current_fh.fh_dentry->d_name.name);
- status = fh_verify(rqstp, current_fh, S_IFREG, 0);
+ status = fh_verify(rqstp, &cstate->current_fh, S_IFREG, 0);
if (status)
return status;
nfs4_lock_state();
- if ((status = nfs4_preprocess_seqid_op(current_fh, oc->oc_seqid,
- &oc->oc_req_stateid,
+ if ((status = nfs4_preprocess_seqid_op(&cstate->current_fh,
+ oc->oc_seqid, &oc->oc_req_stateid,
CHECK_FH | CONFIRM | OPEN_STATE,
&oc->oc_stateowner, &stp, NULL)))
goto out;
out:
if (oc->oc_stateowner) {
nfs4_get_stateowner(oc->oc_stateowner);
- *replay_owner = oc->oc_stateowner;
+ cstate->replay_owner = oc->oc_stateowner;
}
nfs4_unlock_state();
return status;
}
__be32
-nfsd4_open_downgrade(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_open_downgrade *od, struct nfs4_stateowner **replay_owner)
+nfsd4_open_downgrade(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *cstate,
+ struct nfsd4_open_downgrade *od)
{
__be32 status;
struct nfs4_stateid *stp;
unsigned int share_access;
dprintk("NFSD: nfsd4_open_downgrade on file %.*s\n",
- (int)current_fh->fh_dentry->d_name.len,
- current_fh->fh_dentry->d_name.name);
+ (int)cstate->current_fh.fh_dentry->d_name.len,
+ cstate->current_fh.fh_dentry->d_name.name);
if (!access_valid(od->od_share_access)
|| !deny_valid(od->od_share_deny))
return nfserr_inval;
nfs4_lock_state();
- if ((status = nfs4_preprocess_seqid_op(current_fh, od->od_seqid,
+ if ((status = nfs4_preprocess_seqid_op(&cstate->current_fh,
+ od->od_seqid,
&od->od_stateid,
CHECK_FH | OPEN_STATE,
&od->od_stateowner, &stp, NULL)))
out:
if (od->od_stateowner) {
nfs4_get_stateowner(od->od_stateowner);
- *replay_owner = od->od_stateowner;
+ cstate->replay_owner = od->od_stateowner;
}
nfs4_unlock_state();
return status;
* nfs4_unlock_state() called after encode
*/
__be32
-nfsd4_close(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_close *close, struct nfs4_stateowner **replay_owner)
+nfsd4_close(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_close *close)
{
__be32 status;
struct nfs4_stateid *stp;
dprintk("NFSD: nfsd4_close on file %.*s\n",
- (int)current_fh->fh_dentry->d_name.len,
- current_fh->fh_dentry->d_name.name);
+ (int)cstate->current_fh.fh_dentry->d_name.len,
+ cstate->current_fh.fh_dentry->d_name.name);
nfs4_lock_state();
/* check close_lru for replay */
- if ((status = nfs4_preprocess_seqid_op(current_fh, close->cl_seqid,
+ if ((status = nfs4_preprocess_seqid_op(&cstate->current_fh,
+ close->cl_seqid,
&close->cl_stateid,
CHECK_FH | OPEN_STATE | CLOSE_STATE,
&close->cl_stateowner, &stp, NULL)))
out:
if (close->cl_stateowner) {
nfs4_get_stateowner(close->cl_stateowner);
- *replay_owner = close->cl_stateowner;
+ cstate->replay_owner = close->cl_stateowner;
}
nfs4_unlock_state();
return status;
}
__be32
-nfsd4_delegreturn(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_delegreturn *dr)
+nfsd4_delegreturn(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_delegreturn *dr)
{
__be32 status;
- if ((status = fh_verify(rqstp, current_fh, S_IFREG, 0)))
+ if ((status = fh_verify(rqstp, &cstate->current_fh, S_IFREG, 0)))
goto out;
nfs4_lock_state();
- status = nfs4_preprocess_stateid_op(current_fh, &dr->dr_stateid, DELEG_RET, NULL);
+ status = nfs4_preprocess_stateid_op(&cstate->current_fh,
+ &dr->dr_stateid, DELEG_RET, NULL);
nfs4_unlock_state();
out:
return status;
* LOCK operation
*/
__be32
-nfsd4_lock(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_lock *lock, struct nfs4_stateowner **replay_owner)
+nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_lock *lock)
{
struct nfs4_stateowner *open_sop = NULL;
struct nfs4_stateowner *lock_sop = NULL;
if (check_lock_length(lock->lk_offset, lock->lk_length))
return nfserr_inval;
- if ((status = fh_verify(rqstp, current_fh, S_IFREG, MAY_LOCK))) {
+ if ((status = fh_verify(rqstp, &cstate->current_fh,
+ S_IFREG, MAY_LOCK))) {
dprintk("NFSD: nfsd4_lock: permission denied!\n");
return status;
}
goto out;
/* validate and update open stateid and open seqid */
- status = nfs4_preprocess_seqid_op(current_fh,
+ status = nfs4_preprocess_seqid_op(&cstate->current_fh,
lock->lk_new_open_seqid,
&lock->lk_new_open_stateid,
CHECK_FH | OPEN_STATE,
goto out;
} else {
/* lock (lock owner + lock stateid) already exists */
- status = nfs4_preprocess_seqid_op(current_fh,
+ status = nfs4_preprocess_seqid_op(&cstate->current_fh,
lock->lk_old_lock_seqid,
&lock->lk_old_lock_stateid,
CHECK_FH | LOCK_STATE,
conflock.fl_ops = NULL;
conflock.fl_lmops = NULL;
err = posix_lock_file_conf(filp, &file_lock, &conflock);
- dprintk("NFSD: nfsd4_lock: posix_lock_file_conf status %d\n",status);
switch (-err) {
case 0: /* success! */
update_stateid(&lock_stp->st_stateid);
release_stateowner(lock_sop);
if (lock->lk_replay_owner) {
nfs4_get_stateowner(lock->lk_replay_owner);
- *replay_owner = lock->lk_replay_owner;
+ cstate->replay_owner = lock->lk_replay_owner;
}
nfs4_unlock_state();
return status;
* LOCKT operation
*/
__be32
-nfsd4_lockt(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_lockt *lockt)
+nfsd4_lockt(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_lockt *lockt)
{
struct inode *inode;
struct file file;
if (STALE_CLIENTID(&lockt->lt_clientid))
goto out;
- if ((status = fh_verify(rqstp, current_fh, S_IFREG, 0))) {
+ if ((status = fh_verify(rqstp, &cstate->current_fh, S_IFREG, 0))) {
dprintk("NFSD: nfsd4_lockt: fh_verify() failed!\n");
if (status == nfserr_symlink)
status = nfserr_inval;
goto out;
}
- inode = current_fh->fh_dentry->d_inode;
+ inode = cstate->current_fh.fh_dentry->d_inode;
locks_init_lock(&file_lock);
switch (lockt->lt_type) {
case NFS4_READ_LT:
* only the dentry:inode set.
*/
memset(&file, 0, sizeof (struct file));
- file.f_dentry = current_fh->fh_dentry;
+ file.f_path.dentry = cstate->current_fh.fh_dentry;
status = nfs_ok;
if (posix_test_lock(&file, &file_lock, &conflock)) {
}
__be32
-nfsd4_locku(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_locku *locku, struct nfs4_stateowner **replay_owner)
+nfsd4_locku(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
+ struct nfsd4_locku *locku)
{
struct nfs4_stateid *stp;
struct file *filp = NULL;
nfs4_lock_state();
- if ((status = nfs4_preprocess_seqid_op(current_fh,
+ if ((status = nfs4_preprocess_seqid_op(&cstate->current_fh,
locku->lu_seqid,
&locku->lu_stateid,
CHECK_FH | LOCK_STATE,
out:
if (locku->lu_stateowner) {
nfs4_get_stateowner(locku->lu_stateowner);
- *replay_owner = locku->lu_stateowner;
+ cstate->replay_owner = locku->lu_stateowner;
}
nfs4_unlock_state();
return status;
check_for_locks(struct file *filp, struct nfs4_stateowner *lowner)
{
struct file_lock **flpp;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int status = 0;
lock_kernel();
}
__be32
-nfsd4_release_lockowner(struct svc_rqst *rqstp, struct nfsd4_release_lockowner *rlockowner)
+nfsd4_release_lockowner(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *cstate,
+ struct nfsd4_release_lockowner *rlockowner)
{
clientid_t *clid = &rlockowner->rl_clientid;
struct nfs4_stateowner *sop;
exp_get(exp);
if (d_mountpoint(dentry)) {
- if (nfsd_cross_mnt(cd->rd_rqstp, &dentry, &exp)) {
- /*
- * -EAGAIN is the only error returned from
- * nfsd_cross_mnt() and it indicates that an
- * up-call has been initiated to fill in the export
- * options on exp. When the answer comes back,
- * this call will be retried.
- */
- nfserr = nfserr_dropit;
+ int err;
+
+ err = nfsd_cross_mnt(cd->rd_rqstp, &dentry, &exp);
+ if (err) {
+ nfserr = nfserrno(err);
goto out_put;
}
printk (KERN_ERR "nfsd: cannot allocate all %d cache entries, only got %d\n",
CACHESIZE, CACHESIZE-i);
- hash_list = kmalloc (HASHSIZE * sizeof(struct hlist_head), GFP_KERNEL);
+ hash_list = kcalloc (HASHSIZE, sizeof(struct hlist_head), GFP_KERNEL);
if (!hash_list) {
nfsd_cache_shutdown();
printk (KERN_ERR "nfsd: cannot allocate %Zd bytes for hash list\n",
HASHSIZE * sizeof(struct hlist_head));
return;
}
- memset(hash_list, 0, HASHSIZE * sizeof(struct hlist_head));
cache_disabled = 0;
}
static ssize_t nfsctl_transaction_write(struct file *file, const char __user *buf, size_t size, loff_t *pos)
{
- ino_t ino = file->f_dentry->d_inode->i_ino;
+ ino_t ino = file->f_path.dentry->d_inode->i_ino;
char *data;
ssize_t rv;
exp = exp_find(rqstp->rq_client, 0, tfh, &rqstp->rq_chandle);
}
- error = nfserr_dropit;
- if (IS_ERR(exp) && PTR_ERR(exp) == -EAGAIN)
+ if (IS_ERR(exp) && (PTR_ERR(exp) == -EAGAIN
+ || PTR_ERR(exp) == -ETIMEDOUT)) {
+ error = nfserrno(PTR_ERR(exp));
goto out;
+ }
error = nfserr_stale;
if (!exp || IS_ERR(exp))
/*
* Called from nfsd_lookup and encode_dirent. Check if we have crossed
* a mount point.
- * Returns -EAGAIN leaving *dpp and *expp unchanged,
+ * Returns -EAGAIN or -ETIMEDOUT leaving *dpp and *expp unchanged,
* or nfs_ok having possibly changed *dpp and *expp
*/
int
nfsd_sync(struct file *filp)
{
int err;
- struct inode *inode = filp->f_dentry->d_inode;
- dprintk("nfsd: sync file %s\n", filp->f_dentry->d_name.name);
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ dprintk("nfsd: sync file %s\n", filp->f_path.dentry->d_name.name);
mutex_lock(&inode->i_mutex);
- err=nfsd_dosync(filp, filp->f_dentry, filp->f_op);
+ err=nfsd_dosync(filp, filp->f_path.dentry, filp->f_op);
mutex_unlock(&inode->i_mutex);
return err;
int host_err;
err = nfserr_perm;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
#ifdef MSNFS
if ((fhp->fh_export->ex_flags & NFSEXP_MSNFS) &&
(!lock_may_read(inode, offset, *count)))
nfsdstats.io_read += host_err;
*count = host_err;
err = 0;
- fsnotify_access(file->f_dentry);
+ fsnotify_access(file->f_path.dentry);
} else
err = nfserrno(host_err);
out:
err = nfserr_perm;
if ((fhp->fh_export->ex_flags & NFSEXP_MSNFS) &&
- (!lock_may_write(file->f_dentry->d_inode, offset, cnt)))
+ (!lock_may_write(file->f_path.dentry->d_inode, offset, cnt)))
goto out;
#endif
- dentry = file->f_dentry;
+ dentry = file->f_path.dentry;
inode = dentry->d_inode;
exp = fhp->fh_export;
set_fs(oldfs);
if (host_err >= 0) {
nfsdstats.io_write += cnt;
- fsnotify_modify(file->f_dentry);
+ fsnotify_modify(file->f_path.dentry);
}
/* clear setuid/setgid flag after write */
return 0;
if (cache_size < 2*RAPARM_HASH_SIZE)
cache_size = 2*RAPARM_HASH_SIZE;
- raparml = kmalloc(sizeof(struct raparms) * cache_size, GFP_KERNEL);
-
- if (raparml != NULL) {
- dprintk("nfsd: allocating %d readahead buffers.\n",
- cache_size);
- for (i = 0 ; i < RAPARM_HASH_SIZE ; i++) {
- raparm_hash[i].pb_head = NULL;
- spin_lock_init(&raparm_hash[i].pb_lock);
- }
- nperbucket = cache_size >> RAPARM_HASH_BITS;
- memset(raparml, 0, sizeof(struct raparms) * cache_size);
- for (i = 0; i < cache_size - 1; i++) {
- if (i % nperbucket == 0)
- raparm_hash[j++].pb_head = raparml + i;
- if (i % nperbucket < nperbucket-1)
- raparml[i].p_next = raparml + i + 1;
- }
- } else {
+ raparml = kcalloc(cache_size, sizeof(struct raparms), GFP_KERNEL);
+
+ if (!raparml) {
printk(KERN_WARNING
- "nfsd: Could not allocate memory read-ahead cache.\n");
+ "nfsd: Could not allocate memory read-ahead cache.\n");
return -ENOMEM;
}
+
+ dprintk("nfsd: allocating %d readahead buffers.\n", cache_size);
+ for (i = 0 ; i < RAPARM_HASH_SIZE ; i++) {
+ raparm_hash[i].pb_head = NULL;
+ spin_lock_init(&raparm_hash[i].pb_lock);
+ }
+ nperbucket = cache_size >> RAPARM_HASH_BITS;
+ for (i = 0; i < cache_size - 1; i++) {
+ if (i % nperbucket == 0)
+ raparm_hash[j++].pb_head = raparml + i;
+ if (i % nperbucket < nperbucket-1)
+ raparml[i].p_next = raparml + i + 1;
+ }
+
nfsdstats.ra_size = cache_size;
return 0;
}
{
s64 ia_pos, ia_start, prev_ia_pos, bmp_pos;
loff_t fpos, i_size;
- struct inode *bmp_vi, *vdir = filp->f_dentry->d_inode;
+ struct inode *bmp_vi, *vdir = filp->f_path.dentry->d_inode;
struct super_block *sb = vdir->i_sb;
ntfs_inode *ndir = NTFS_I(vdir);
ntfs_volume *vol = NTFS_SB(sb);
if (fpos == 1) {
ntfs_debug("Calling filldir for .. with len 2, fpos 0x1, "
"inode 0x%lx, DT_DIR.",
- (unsigned long)parent_ino(filp->f_dentry));
+ (unsigned long)parent_ino(filp->f_path.dentry));
rc = filldir(dirent, "..", 2, fpos,
- parent_ino(filp->f_dentry), DT_DIR);
+ parent_ino(filp->f_path.dentry), DT_DIR);
if (rc)
goto done;
fpos++;
goto out;
if (!count)
goto out;
- err = remove_suid(file->f_dentry);
+ err = remove_suid(file->f_path.dentry);
if (err)
goto out;
file_update_time(file);
goto bail;
}
- *tc = kcalloc(1, sizeof(struct ocfs2_truncate_context), GFP_KERNEL);
+ *tc = kzalloc(sizeof(struct ocfs2_truncate_context), GFP_KERNEL);
if (!(*tc)) {
status = -ENOMEM;
mlog_errno(status);
ssize_t bytes,
void *private)
{
- struct inode *inode = iocb->ki_filp->f_dentry->d_inode;
+ struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
/* this io's submitter should not have unlocked this before we could */
BUG_ON(!ocfs2_iocb_is_rw_locked(iocb));
unsigned long nr_segs)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_dentry->d_inode->i_mapping->host;
+ struct inode *inode = file->f_path.dentry->d_inode->i_mapping->host;
int ret;
mlog_entry_void();
struct o2hb_region *reg = NULL;
struct config_item *ret = NULL;
- reg = kcalloc(1, sizeof(struct o2hb_region), GFP_KERNEL);
+ reg = kzalloc(sizeof(struct o2hb_region), GFP_KERNEL);
if (reg == NULL)
goto out; /* ENOMEM */
struct o2hb_heartbeat_group *hs = NULL;
struct config_group *ret = NULL;
- hs = kcalloc(1, sizeof(struct o2hb_heartbeat_group), GFP_KERNEL);
+ hs = kzalloc(sizeof(struct o2hb_heartbeat_group), GFP_KERNEL);
if (hs == NULL)
goto out;
/* for now we operate under the assertion that there can be only one
* cluster active at a time. Changing this will require trickling
* cluster references throughout where nodes are looked up */
-static struct o2nm_cluster *o2nm_single_cluster = NULL;
+struct o2nm_cluster *o2nm_single_cluster = NULL;
#define OCFS2_MAX_HB_CTL_PATH 256
static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl";
}
EXPORT_SYMBOL_GPL(o2nm_get_hb_ctl_path);
-struct o2nm_cluster {
- struct config_group cl_group;
- unsigned cl_has_local:1;
- u8 cl_local_node;
- rwlock_t cl_nodes_lock;
- struct o2nm_node *cl_nodes[O2NM_MAX_NODES];
- struct rb_root cl_node_ip_tree;
- /* this bitmap is part of a hack for disk bitmap.. will go eventually. - zab */
- unsigned long cl_nodes_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)];
-};
-
struct o2nm_node *o2nm_get_node_by_num(u8 node_num)
{
struct o2nm_node *node = NULL;
}
#endif
+struct o2nm_cluster_attribute {
+ struct configfs_attribute attr;
+ ssize_t (*show)(struct o2nm_cluster *, char *);
+ ssize_t (*store)(struct o2nm_cluster *, const char *, size_t);
+};
+
+static ssize_t o2nm_cluster_attr_write(const char *page, ssize_t count,
+ unsigned int *val)
+{
+ unsigned long tmp;
+ char *p = (char *)page;
+
+ tmp = simple_strtoul(p, &p, 0);
+ if (!p || (*p && (*p != '\n')))
+ return -EINVAL;
+
+ if (tmp == 0)
+ return -EINVAL;
+ if (tmp >= (u32)-1)
+ return -ERANGE;
+
+ *val = tmp;
+
+ return count;
+}
+
+static ssize_t o2nm_cluster_attr_idle_timeout_ms_read(
+ struct o2nm_cluster *cluster, char *page)
+{
+ return sprintf(page, "%u\n", cluster->cl_idle_timeout_ms);
+}
+
+static ssize_t o2nm_cluster_attr_idle_timeout_ms_write(
+ struct o2nm_cluster *cluster, const char *page, size_t count)
+{
+ ssize_t ret;
+ unsigned int val;
+
+ ret = o2nm_cluster_attr_write(page, count, &val);
+
+ if (ret > 0) {
+ if (cluster->cl_idle_timeout_ms != val
+ && o2net_num_connected_peers()) {
+ mlog(ML_NOTICE,
+ "o2net: cannot change idle timeout after "
+ "the first peer has agreed to it."
+ " %d connected peers\n",
+ o2net_num_connected_peers());
+ ret = -EINVAL;
+ } else if (val <= cluster->cl_keepalive_delay_ms) {
+ mlog(ML_NOTICE, "o2net: idle timeout must be larger "
+ "than keepalive delay\n");
+ ret = -EINVAL;
+ } else {
+ cluster->cl_idle_timeout_ms = val;
+ }
+ }
+
+ return ret;
+}
+
+static ssize_t o2nm_cluster_attr_keepalive_delay_ms_read(
+ struct o2nm_cluster *cluster, char *page)
+{
+ return sprintf(page, "%u\n", cluster->cl_keepalive_delay_ms);
+}
+
+static ssize_t o2nm_cluster_attr_keepalive_delay_ms_write(
+ struct o2nm_cluster *cluster, const char *page, size_t count)
+{
+ ssize_t ret;
+ unsigned int val;
+
+ ret = o2nm_cluster_attr_write(page, count, &val);
+
+ if (ret > 0) {
+ if (cluster->cl_keepalive_delay_ms != val
+ && o2net_num_connected_peers()) {
+ mlog(ML_NOTICE,
+ "o2net: cannot change keepalive delay after"
+ " the first peer has agreed to it."
+ " %d connected peers\n",
+ o2net_num_connected_peers());
+ ret = -EINVAL;
+ } else if (val >= cluster->cl_idle_timeout_ms) {
+ mlog(ML_NOTICE, "o2net: keepalive delay must be "
+ "smaller than idle timeout\n");
+ ret = -EINVAL;
+ } else {
+ cluster->cl_keepalive_delay_ms = val;
+ }
+ }
+
+ return ret;
+}
+
+static ssize_t o2nm_cluster_attr_reconnect_delay_ms_read(
+ struct o2nm_cluster *cluster, char *page)
+{
+ return sprintf(page, "%u\n", cluster->cl_reconnect_delay_ms);
+}
+
+static ssize_t o2nm_cluster_attr_reconnect_delay_ms_write(
+ struct o2nm_cluster *cluster, const char *page, size_t count)
+{
+ return o2nm_cluster_attr_write(page, count,
+ &cluster->cl_reconnect_delay_ms);
+}
+static struct o2nm_cluster_attribute o2nm_cluster_attr_idle_timeout_ms = {
+ .attr = { .ca_owner = THIS_MODULE,
+ .ca_name = "idle_timeout_ms",
+ .ca_mode = S_IRUGO | S_IWUSR },
+ .show = o2nm_cluster_attr_idle_timeout_ms_read,
+ .store = o2nm_cluster_attr_idle_timeout_ms_write,
+};
+
+static struct o2nm_cluster_attribute o2nm_cluster_attr_keepalive_delay_ms = {
+ .attr = { .ca_owner = THIS_MODULE,
+ .ca_name = "keepalive_delay_ms",
+ .ca_mode = S_IRUGO | S_IWUSR },
+ .show = o2nm_cluster_attr_keepalive_delay_ms_read,
+ .store = o2nm_cluster_attr_keepalive_delay_ms_write,
+};
+
+static struct o2nm_cluster_attribute o2nm_cluster_attr_reconnect_delay_ms = {
+ .attr = { .ca_owner = THIS_MODULE,
+ .ca_name = "reconnect_delay_ms",
+ .ca_mode = S_IRUGO | S_IWUSR },
+ .show = o2nm_cluster_attr_reconnect_delay_ms_read,
+ .store = o2nm_cluster_attr_reconnect_delay_ms_write,
+};
+
+static struct configfs_attribute *o2nm_cluster_attrs[] = {
+ &o2nm_cluster_attr_idle_timeout_ms.attr,
+ &o2nm_cluster_attr_keepalive_delay_ms.attr,
+ &o2nm_cluster_attr_reconnect_delay_ms.attr,
+ NULL,
+};
+static ssize_t o2nm_cluster_show(struct config_item *item,
+ struct configfs_attribute *attr,
+ char *page)
+{
+ struct o2nm_cluster *cluster = to_o2nm_cluster(item);
+ struct o2nm_cluster_attribute *o2nm_cluster_attr =
+ container_of(attr, struct o2nm_cluster_attribute, attr);
+ ssize_t ret = 0;
+
+ if (o2nm_cluster_attr->show)
+ ret = o2nm_cluster_attr->show(cluster, page);
+ return ret;
+}
+
+static ssize_t o2nm_cluster_store(struct config_item *item,
+ struct configfs_attribute *attr,
+ const char *page, size_t count)
+{
+ struct o2nm_cluster *cluster = to_o2nm_cluster(item);
+ struct o2nm_cluster_attribute *o2nm_cluster_attr =
+ container_of(attr, struct o2nm_cluster_attribute, attr);
+ ssize_t ret;
+
+ if (o2nm_cluster_attr->store == NULL) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = o2nm_cluster_attr->store(cluster, page, count);
+ if (ret < count)
+ goto out;
+out:
+ return ret;
+}
+
static struct config_item *o2nm_node_group_make_item(struct config_group *group,
const char *name)
{
if (strlen(name) > O2NM_MAX_NAME_LEN)
goto out; /* ENAMETOOLONG */
- node = kcalloc(1, sizeof(struct o2nm_node), GFP_KERNEL);
+ node = kzalloc(sizeof(struct o2nm_node), GFP_KERNEL);
if (node == NULL)
goto out; /* ENOMEM */
static struct configfs_item_operations o2nm_cluster_item_ops = {
.release = o2nm_cluster_release,
+ .show_attribute = o2nm_cluster_show,
+ .store_attribute = o2nm_cluster_store,
};
static struct config_item_type o2nm_cluster_type = {
.ct_item_ops = &o2nm_cluster_item_ops,
+ .ct_attrs = o2nm_cluster_attrs,
.ct_owner = THIS_MODULE,
};
if (o2nm_single_cluster)
goto out; /* ENOSPC */
- cluster = kcalloc(1, sizeof(struct o2nm_cluster), GFP_KERNEL);
- ns = kcalloc(1, sizeof(struct o2nm_node_group), GFP_KERNEL);
+ cluster = kzalloc(sizeof(struct o2nm_cluster), GFP_KERNEL);
+ ns = kzalloc(sizeof(struct o2nm_node_group), GFP_KERNEL);
defs = kcalloc(3, sizeof(struct config_group *), GFP_KERNEL);
o2hb_group = o2hb_alloc_hb_set();
if (cluster == NULL || ns == NULL || o2hb_group == NULL || defs == NULL)
cluster->cl_group.default_groups[2] = NULL;
rwlock_init(&cluster->cl_nodes_lock);
cluster->cl_node_ip_tree = RB_ROOT;
+ cluster->cl_reconnect_delay_ms = O2NET_RECONNECT_DELAY_MS_DEFAULT;
+ cluster->cl_idle_timeout_ms = O2NET_IDLE_TIMEOUT_MS_DEFAULT;
+ cluster->cl_keepalive_delay_ms = O2NET_KEEPALIVE_DELAY_MS_DEFAULT;
ret = &cluster->cl_group;
o2nm_single_cluster = cluster;
unsigned long nd_set_attributes;
};
+struct o2nm_cluster {
+ struct config_group cl_group;
+ unsigned cl_has_local:1;
+ u8 cl_local_node;
+ rwlock_t cl_nodes_lock;
+ struct o2nm_node *cl_nodes[O2NM_MAX_NODES];
+ struct rb_root cl_node_ip_tree;
+ unsigned int cl_idle_timeout_ms;
+ unsigned int cl_keepalive_delay_ms;
+ unsigned int cl_reconnect_delay_ms;
+
+ /* this bitmap is part of a hack for disk bitmap.. will go eventually. - zab */
+ unsigned long cl_nodes_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)];
+};
+
+extern struct o2nm_cluster *o2nm_single_cluster;
+
u8 o2nm_this_node(void);
int o2nm_configured_node_map(unsigned long *map, unsigned bytes);
static void o2net_sc_send_keep_req(struct work_struct *work);
static void o2net_idle_timer(unsigned long data);
static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
+static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
+
+/*
+ * FIXME: These should use to_o2nm_cluster_from_node(), but we end up
+ * losing our parent link to the cluster during shutdown. This can be
+ * solved by adding a pre-removal callback to configfs, or passing
+ * around the cluster with the node. -jeffm
+ */
+static inline int o2net_reconnect_delay(struct o2nm_node *node)
+{
+ return o2nm_single_cluster->cl_reconnect_delay_ms;
+}
+
+static inline int o2net_keepalive_delay(struct o2nm_node *node)
+{
+ return o2nm_single_cluster->cl_keepalive_delay_ms;
+}
+
+static inline int o2net_idle_timeout(struct o2nm_node *node)
+{
+ return o2nm_single_cluster->cl_idle_timeout_ms;
+}
static inline int o2net_sys_err_to_errno(enum o2net_system_error err)
{
{
struct o2net_sock_container *sc = container_of(kref,
struct o2net_sock_container, sc_kref);
+ BUG_ON(timer_pending(&sc->sc_idle_timeout));
+
sclog(sc, "releasing\n");
if (sc->sc_sock) {
struct page *page = NULL;
page = alloc_page(GFP_NOFS);
- sc = kcalloc(1, sizeof(*sc), GFP_NOFS);
+ sc = kzalloc(sizeof(*sc), GFP_NOFS);
if (sc == NULL || page == NULL)
goto out;
sc_put(sc);
}
+static atomic_t o2net_connected_peers = ATOMIC_INIT(0);
+
+int o2net_num_connected_peers(void)
+{
+ return atomic_read(&o2net_connected_peers);
+}
+
static void o2net_set_nn_state(struct o2net_node *nn,
struct o2net_sock_container *sc,
unsigned valid, int err)
assert_spin_locked(&nn->nn_lock);
+ if (old_sc && !sc)
+ atomic_dec(&o2net_connected_peers);
+ else if (!old_sc && sc)
+ atomic_inc(&o2net_connected_peers);
+
/* the node num comparison and single connect/accept path should stop
* an non-null sc from being overwritten with another */
BUG_ON(sc && nn->nn_sc && nn->nn_sc != sc);
/* delay if we're withing a RECONNECT_DELAY of the
* last attempt */
delay = (nn->nn_last_connect_attempt +
- msecs_to_jiffies(O2NET_RECONNECT_DELAY_MS))
+ msecs_to_jiffies(o2net_reconnect_delay(sc->sc_node)))
- jiffies;
- if (delay > msecs_to_jiffies(O2NET_RECONNECT_DELAY_MS))
+ if (delay > msecs_to_jiffies(o2net_reconnect_delay(sc->sc_node)))
delay = 0;
mlog(ML_CONN, "queueing conn attempt in %lu jiffies\n", delay);
queue_delayed_work(o2net_wq, &nn->nn_connect_work, delay);
goto out;
}
- nmh = kcalloc(1, sizeof(struct o2net_msg_handler), GFP_NOFS);
+ nmh = kzalloc(sizeof(struct o2net_msg_handler), GFP_NOFS);
if (nmh == NULL) {
ret = -ENOMEM;
goto out;
return -1;
}
+ /*
+ * Ensure timeouts are consistent with other nodes, otherwise
+ * we can end up with one node thinking that the other must be down,
+ * but isn't. This can ultimately cause corruption.
+ */
+ if (be32_to_cpu(hand->o2net_idle_timeout_ms) !=
+ o2net_idle_timeout(sc->sc_node)) {
+ mlog(ML_NOTICE, SC_NODEF_FMT " uses a network idle timeout of "
+ "%u ms, but we use %u ms locally. disconnecting\n",
+ SC_NODEF_ARGS(sc),
+ be32_to_cpu(hand->o2net_idle_timeout_ms),
+ o2net_idle_timeout(sc->sc_node));
+ o2net_ensure_shutdown(nn, sc, -ENOTCONN);
+ return -1;
+ }
+
+ if (be32_to_cpu(hand->o2net_keepalive_delay_ms) !=
+ o2net_keepalive_delay(sc->sc_node)) {
+ mlog(ML_NOTICE, SC_NODEF_FMT " uses a keepalive delay of "
+ "%u ms, but we use %u ms locally. disconnecting\n",
+ SC_NODEF_ARGS(sc),
+ be32_to_cpu(hand->o2net_keepalive_delay_ms),
+ o2net_keepalive_delay(sc->sc_node));
+ o2net_ensure_shutdown(nn, sc, -ENOTCONN);
+ return -1;
+ }
+
+ if (be32_to_cpu(hand->o2hb_heartbeat_timeout_ms) !=
+ O2HB_MAX_WRITE_TIMEOUT_MS) {
+ mlog(ML_NOTICE, SC_NODEF_FMT " uses a heartbeat timeout of "
+ "%u ms, but we use %u ms locally. disconnecting\n",
+ SC_NODEF_ARGS(sc),
+ be32_to_cpu(hand->o2hb_heartbeat_timeout_ms),
+ O2HB_MAX_WRITE_TIMEOUT_MS);
+ o2net_ensure_shutdown(nn, sc, -ENOTCONN);
+ return -1;
+ }
+
sc->sc_handshake_ok = 1;
spin_lock(&nn->nn_lock);
/* set valid and queue the idle timers only if it hasn't been
* shut down already */
if (nn->nn_sc == sc) {
- o2net_sc_postpone_idle(sc);
+ o2net_sc_reset_idle_timer(sc);
o2net_set_nn_state(nn, sc, 1, 0);
}
spin_unlock(&nn->nn_lock);
sclog(sc, "receiving\n");
do_gettimeofday(&sc->sc_tv_advance_start);
+ if (unlikely(sc->sc_handshake_ok == 0)) {
+ if(sc->sc_page_off < sizeof(struct o2net_handshake)) {
+ data = page_address(sc->sc_page) + sc->sc_page_off;
+ datalen = sizeof(struct o2net_handshake) - sc->sc_page_off;
+ ret = o2net_recv_tcp_msg(sc->sc_sock, data, datalen);
+ if (ret > 0)
+ sc->sc_page_off += ret;
+ }
+
+ if (sc->sc_page_off == sizeof(struct o2net_handshake)) {
+ o2net_check_handshake(sc);
+ if (unlikely(sc->sc_handshake_ok == 0))
+ ret = -EPROTO;
+ }
+ goto out;
+ }
+
/* do we need more header? */
if (sc->sc_page_off < sizeof(struct o2net_msg)) {
data = page_address(sc->sc_page) + sc->sc_page_off;
ret = o2net_recv_tcp_msg(sc->sc_sock, data, datalen);
if (ret > 0) {
sc->sc_page_off += ret;
-
- /* this working relies on the handshake being
- * smaller than the normal message header */
- if (sc->sc_page_off >= sizeof(struct o2net_handshake)&&
- !sc->sc_handshake_ok && o2net_check_handshake(sc)) {
- ret = -EPROTO;
- goto out;
- }
-
/* only swab incoming here.. we can
* only get here once as we cross from
* being under to over */
return ret;
}
+static void o2net_initialize_handshake(void)
+{
+ o2net_hand->o2hb_heartbeat_timeout_ms = cpu_to_be32(
+ O2HB_MAX_WRITE_TIMEOUT_MS);
+ o2net_hand->o2net_idle_timeout_ms = cpu_to_be32(
+ o2net_idle_timeout(NULL));
+ o2net_hand->o2net_keepalive_delay_ms = cpu_to_be32(
+ o2net_keepalive_delay(NULL));
+ o2net_hand->o2net_reconnect_delay_ms = cpu_to_be32(
+ o2net_reconnect_delay(NULL));
+}
+
/* ------------------------------------------------------------ */
/* called when a connect completes and after a sock is accepted. the
(unsigned long long)O2NET_PROTOCOL_VERSION,
(unsigned long long)be64_to_cpu(o2net_hand->connector_id));
+ o2net_initialize_handshake();
o2net_sendpage(sc, o2net_hand, sizeof(*o2net_hand));
sc_put(sc);
}
do_gettimeofday(&now);
- printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT " has been idle for 10 "
- "seconds, shutting it down.\n", SC_NODEF_ARGS(sc));
+ printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u "
+ "seconds, shutting it down.\n", SC_NODEF_ARGS(sc),
+ o2net_idle_timeout(sc->sc_node) / 1000,
+ o2net_idle_timeout(sc->sc_node) % 1000);
mlog(ML_NOTICE, "here are some times that might help debug the "
"situation: (tmr %ld.%ld now %ld.%ld dr %ld.%ld adv "
"%ld.%ld:%ld.%ld func (%08x:%u) %ld.%ld:%ld.%ld)\n",
o2net_sc_queue_work(sc, &sc->sc_shutdown_work);
}
-static void o2net_sc_postpone_idle(struct o2net_sock_container *sc)
+static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc)
{
o2net_sc_cancel_delayed_work(sc, &sc->sc_keepalive_work);
o2net_sc_queue_delayed_work(sc, &sc->sc_keepalive_work,
- O2NET_KEEPALIVE_DELAY_SECS * HZ);
+ msecs_to_jiffies(o2net_keepalive_delay(sc->sc_node)));
do_gettimeofday(&sc->sc_tv_timer);
mod_timer(&sc->sc_idle_timeout,
- jiffies + (O2NET_IDLE_TIMEOUT_SECS * HZ));
+ jiffies + msecs_to_jiffies(o2net_idle_timeout(sc->sc_node)));
+}
+
+static void o2net_sc_postpone_idle(struct o2net_sock_container *sc)
+{
+ /* Only push out an existing timer */
+ if (timer_pending(&sc->sc_idle_timeout))
+ o2net_sc_reset_idle_timer(sc);
}
/* this work func is kicked whenever a path sets the nn state which doesn't
spin_lock(&nn->nn_lock);
if (!nn->nn_sc_valid) {
+ struct o2nm_node *node = nn->nn_sc->sc_node;
mlog(ML_ERROR, "no connection established with node %u after "
- "%u seconds, giving up and returning errors.\n",
- o2net_num_from_nn(nn), O2NET_IDLE_TIMEOUT_SECS);
+ "%u.%u seconds, giving up and returning errors.\n",
+ o2net_num_from_nn(nn),
+ o2net_idle_timeout(node) / 1000,
+ o2net_idle_timeout(node) % 1000);
o2net_set_nn_state(nn, NULL, 0, -ENOTCONN);
}
if (node_num != o2nm_this_node())
o2net_disconnect_node(node);
+
+ BUG_ON(atomic_read(&o2net_connected_peers) < 0);
}
static void o2net_hb_node_up_cb(struct o2nm_node *node, int node_num,
/* ensure an immediate connect attempt */
nn->nn_last_connect_attempt = jiffies -
- (msecs_to_jiffies(O2NET_RECONNECT_DELAY_MS) + 1);
+ (msecs_to_jiffies(o2net_reconnect_delay(node)) + 1);
if (node_num != o2nm_this_node()) {
/* heartbeat doesn't work unless a local node number is
* configured and doing so brings up the o2net_wq, so we can
* use it.. */
queue_delayed_work(o2net_wq, &nn->nn_connect_expired,
- O2NET_IDLE_TIMEOUT_SECS * HZ);
+ msecs_to_jiffies(o2net_idle_timeout(node)));
/* believe it or not, accept and node hearbeating testing
* can succeed for this node before we got here.. so
o2net_register_callbacks(sc->sc_sock->sk, sc);
o2net_sc_queue_work(sc, &sc->sc_rx_work);
+ o2net_initialize_handshake();
o2net_sendpage(sc, o2net_hand, sizeof(*o2net_hand));
out:
o2quo_init();
- o2net_hand = kcalloc(1, sizeof(struct o2net_handshake), GFP_KERNEL);
- o2net_keep_req = kcalloc(1, sizeof(struct o2net_msg), GFP_KERNEL);
- o2net_keep_resp = kcalloc(1, sizeof(struct o2net_msg), GFP_KERNEL);
+ o2net_hand = kzalloc(sizeof(struct o2net_handshake), GFP_KERNEL);
+ o2net_keep_req = kzalloc(sizeof(struct o2net_msg), GFP_KERNEL);
+ o2net_keep_resp = kzalloc(sizeof(struct o2net_msg), GFP_KERNEL);
if (!o2net_hand || !o2net_keep_req || !o2net_keep_resp) {
kfree(o2net_hand);
kfree(o2net_keep_req);
#define O2NET_MAX_PAYLOAD_BYTES (4096 - sizeof(struct o2net_msg))
+/* same as hb delay, we're waiting for another node to recognize our hb */
+#define O2NET_RECONNECT_DELAY_MS_DEFAULT 2000
+
+#define O2NET_KEEPALIVE_DELAY_MS_DEFAULT 5000
+#define O2NET_IDLE_TIMEOUT_MS_DEFAULT 10000
+
+
/* TODO: figure this out.... */
static inline int o2net_link_down(int err, struct socket *sock)
{
int o2net_start_listening(struct o2nm_node *node);
void o2net_stop_listening(struct o2nm_node *node);
void o2net_disconnect_node(struct o2nm_node *node);
+int o2net_num_connected_peers(void);
int o2net_init(void);
void o2net_exit(void);
#define O2NET_MSG_KEEP_REQ_MAGIC ((u16)0xfa57)
#define O2NET_MSG_KEEP_RESP_MAGIC ((u16)0xfa58)
-/* same as hb delay, we're waiting for another node to recognize our hb */
-#define O2NET_RECONNECT_DELAY_MS O2HB_REGION_TIMEOUT_MS
-
/* we're delaying our quorum decision so that heartbeat will have timed
* out truly dead nodes by the time we come around to making decisions
* on their number */
#define O2NET_QUORUM_DELAY_MS ((o2hb_dead_threshold + 2) * O2HB_REGION_TIMEOUT_MS)
-#define O2NET_KEEPALIVE_DELAY_SECS 5
-#define O2NET_IDLE_TIMEOUT_SECS 10
-
/*
* This version number represents quite a lot, unfortunately. It not
* only represents the raw network message protocol on the wire but also
* locking semantics of the file system using the protocol. It should
* be somewhere else, I'm sure, but right now it isn't.
*
+ * New in version 5:
+ * - Network timeout checking protocol
+ *
* New in version 4:
* - Remove i_generation from lock names for better stat performance.
*
* - full 64 bit i_size in the metadata lock lvbs
* - introduction of "rw" lock and pushing meta/data locking down
*/
-#define O2NET_PROTOCOL_VERSION 4ULL
+#define O2NET_PROTOCOL_VERSION 5ULL
struct o2net_handshake {
__be64 protocol_version;
__be64 connector_id;
+ __be32 o2hb_heartbeat_timeout_ms;
+ __be32 o2net_idle_timeout_ms;
+ __be32 o2net_keepalive_delay_ms;
+ __be32 o2net_reconnect_delay_ms;
};
struct o2net_node {
struct buffer_head * bh, * tmp;
struct ocfs2_dir_entry * de;
int err;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block * sb = inode->i_sb;
unsigned int ra_sectors = 16;
int lock_level = 0;
mlog_entry("%p", dlm);
- ctxt = kcalloc(1, sizeof(*ctxt), GFP_KERNEL);
+ ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL);
if (!ctxt) {
status = -ENOMEM;
mlog_errno(status);
int i;
struct dlm_ctxt *dlm = NULL;
- dlm = kcalloc(1, sizeof(*dlm), GFP_KERNEL);
+ dlm = kzalloc(sizeof(*dlm), GFP_KERNEL);
if (!dlm) {
mlog_errno(-ENOMEM);
goto leave;
int bytes_left;
ssize_t readlen;
char *lvb_buf;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
mlog(0, "inode %lu, count = %zu, *ppos = %llu\n",
inode->i_ino, count, *ppos);
int bytes_left;
ssize_t writelen;
char *lvb_buf;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
mlog(0, "inode %lu, count = %zu, *ppos = %llu\n",
inode->i_ino, count, *ppos);
struct dlm_lock *lock;
int kernel_allocated = 0;
- lock = kcalloc(1, sizeof(*lock), GFP_NOFS);
+ lock = kzalloc(sizeof(*lock), GFP_NOFS);
if (!lock)
return NULL;
if (!lksb) {
/* zero memory only if kernel-allocated */
- lksb = kcalloc(1, sizeof(*lksb), GFP_NOFS);
+ lksb = kzalloc(sizeof(*lksb), GFP_NOFS);
if (!lksb) {
kfree(lock);
return NULL;
int ignore_higher, u8 request_from, u32 flags)
{
struct dlm_work_item *item;
- item = kcalloc(1, sizeof(*item), GFP_NOFS);
+ item = kzalloc(sizeof(*item), GFP_NOFS);
if (!item)
return -ENOMEM;
}
BUG_ON(num == dead_node);
- ndata = kcalloc(1, sizeof(*ndata), GFP_NOFS);
+ ndata = kzalloc(sizeof(*ndata), GFP_NOFS);
if (!ndata) {
dlm_destroy_recovery_area(dlm, dead_node);
return -ENOMEM;
}
BUG_ON(lr->dead_node != dlm->reco.dead_node);
- item = kcalloc(1, sizeof(*item), GFP_NOFS);
+ item = kzalloc(sizeof(*item), GFP_NOFS);
if (!item) {
dlm_put(dlm);
return -ENOMEM;
ret = -ENOMEM;
buf = kmalloc(be16_to_cpu(msg->data_len), GFP_NOFS);
- item = kcalloc(1, sizeof(*item), GFP_NOFS);
+ item = kzalloc(sizeof(*item), GFP_NOFS);
if (!buf || !item)
goto leave;
int dlm_flags)
{
int ret = 0;
- enum dlm_status status;
+ enum dlm_status status = DLM_NORMAL;
unsigned long flags;
mlog_entry_void();
{
int status, level;
struct ocfs2_lock_res *lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
BUG_ON(!inode);
(unsigned long long)OCFS2_I(inode)->ip_blkno,
write ? "EXMODE" : "PRMODE");
+ if (ocfs2_mount_local(osb))
+ return 0;
+
lockres = &OCFS2_I(inode)->ip_rw_lockres;
level = write ? LKM_EXMODE : LKM_PRMODE;
{
int level = write ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &OCFS2_I(inode)->ip_rw_lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry_void();
(unsigned long long)OCFS2_I(inode)->ip_blkno,
write ? "EXMODE" : "PRMODE");
- ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level);
+ if (!ocfs2_mount_local(osb))
+ ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level);
mlog_exit_void();
}
{
int status = 0, level;
struct ocfs2_lock_res *lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
BUG_ON(!inode);
goto out;
}
+ if (ocfs2_mount_local(osb))
+ goto out;
+
lockres = &OCFS2_I(inode)->ip_data_lockres;
level = write ? LKM_EXMODE : LKM_PRMODE;
{
int level = write ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &OCFS2_I(inode)->ip_data_lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry_void();
(unsigned long long)OCFS2_I(inode)->ip_blkno,
write ? "EXMODE" : "PRMODE");
- if (!ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb)))
+ if (!ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb)) &&
+ !ocfs2_mount_local(osb))
ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level);
mlog_exit_void();
{
int status = 0;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
- struct ocfs2_lock_res *lockres;
+ struct ocfs2_lock_res *lockres = NULL;
struct ocfs2_dinode *fe;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry_void();
}
spin_unlock(&oi->ip_lock);
- lockres = &oi->ip_meta_lockres;
+ if (!ocfs2_mount_local(osb)) {
+ lockres = &oi->ip_meta_lockres;
- if (!ocfs2_should_refresh_lock_res(lockres))
- goto bail;
+ if (!ocfs2_should_refresh_lock_res(lockres))
+ goto bail;
+ }
/* This will discard any caching information we might have had
* for the inode metadata. */
* map (directories, bitmap files, etc) */
ocfs2_extent_map_trunc(inode, 0);
- if (ocfs2_meta_lvb_is_trustable(inode, lockres)) {
+ if (lockres && ocfs2_meta_lvb_is_trustable(inode, lockres)) {
mlog(0, "Trusting LVB on inode %llu\n",
(unsigned long long)oi->ip_blkno);
ocfs2_refresh_inode_from_lvb(inode);
status = 0;
bail_refresh:
- ocfs2_complete_lock_res_refresh(lockres, status);
+ if (lockres)
+ ocfs2_complete_lock_res_refresh(lockres, status);
bail:
mlog_exit(status);
return status;
int arg_flags)
{
int status, level, dlm_flags, acquired;
- struct ocfs2_lock_res *lockres;
+ struct ocfs2_lock_res *lockres = NULL;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct buffer_head *local_bh = NULL;
goto bail;
}
+ if (ocfs2_mount_local(osb))
+ goto local;
+
if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
wait_event(osb->recovery_event,
ocfs2_node_map_is_empty(osb, &osb->recovery_map));
wait_event(osb->recovery_event,
ocfs2_node_map_is_empty(osb, &osb->recovery_map));
+local:
/*
* We only see this flag if we're being called from
* ocfs2_read_locked_inode(). It means we're locking an inode
*/
if (inode->i_state & I_NEW) {
status = 0;
- ocfs2_complete_lock_res_refresh(lockres, 0);
+ if (lockres)
+ ocfs2_complete_lock_res_refresh(lockres, 0);
goto bail;
}
{
int level = ex ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &OCFS2_I(inode)->ip_meta_lockres;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry_void();
(unsigned long long)OCFS2_I(inode)->ip_blkno,
ex ? "EXMODE" : "PRMODE");
- if (!ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb)))
+ if (!ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb)) &&
+ !ocfs2_mount_local(osb))
ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level);
mlog_exit_void();
int ocfs2_super_lock(struct ocfs2_super *osb,
int ex)
{
- int status;
+ int status = 0;
int level = ex ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &osb->osb_super_lockres;
struct buffer_head *bh;
if (ocfs2_is_hard_readonly(osb))
return -EROFS;
+ if (ocfs2_mount_local(osb))
+ goto bail;
+
status = ocfs2_cluster_lock(osb, lockres, level, 0, 0);
if (status < 0) {
mlog_errno(status);
int level = ex ? LKM_EXMODE : LKM_PRMODE;
struct ocfs2_lock_res *lockres = &osb->osb_super_lockres;
- ocfs2_cluster_unlock(osb, lockres, level);
+ if (!ocfs2_mount_local(osb))
+ ocfs2_cluster_unlock(osb, lockres, level);
}
int ocfs2_rename_lock(struct ocfs2_super *osb)
if (ocfs2_is_hard_readonly(osb))
return -EROFS;
+ if (ocfs2_mount_local(osb))
+ return 0;
+
status = ocfs2_cluster_lock(osb, lockres, LKM_EXMODE, 0, 0);
if (status < 0)
mlog_errno(status);
{
struct ocfs2_lock_res *lockres = &osb->osb_rename_lockres;
- ocfs2_cluster_unlock(osb, lockres, LKM_EXMODE);
+ if (!ocfs2_mount_local(osb))
+ ocfs2_cluster_unlock(osb, lockres, LKM_EXMODE);
}
int ocfs2_dentry_lock(struct dentry *dentry, int ex)
if (ocfs2_is_hard_readonly(osb))
return -EROFS;
+ if (ocfs2_mount_local(osb))
+ return 0;
+
ret = ocfs2_cluster_lock(osb, &dl->dl_lockres, level, 0, 0);
if (ret < 0)
mlog_errno(ret);
struct ocfs2_dentry_lock *dl = dentry->d_fsdata;
struct ocfs2_super *osb = OCFS2_SB(dentry->d_sb);
- ocfs2_cluster_unlock(osb, &dl->dl_lockres, level);
+ if (!ocfs2_mount_local(osb))
+ ocfs2_cluster_unlock(osb, &dl->dl_lockres, level);
}
/* Reference counting of the dlm debug structure. We want this because
int ocfs2_dlm_init(struct ocfs2_super *osb)
{
- int status;
+ int status = 0;
u32 dlm_key;
- struct dlm_ctxt *dlm;
+ struct dlm_ctxt *dlm = NULL;
mlog_entry_void();
+ if (ocfs2_mount_local(osb))
+ goto local;
+
status = ocfs2_dlm_init_debug(osb);
if (status < 0) {
mlog_errno(status);
goto bail;
}
+ dlm_register_eviction_cb(dlm, &osb->osb_eviction_cb);
+
+local:
ocfs2_super_lock_res_init(&osb->osb_super_lockres, osb);
ocfs2_rename_lock_res_init(&osb->osb_rename_lockres, osb);
- dlm_register_eviction_cb(dlm, &osb->osb_eviction_cb);
-
osb->dlm = dlm;
status = 0;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
- file->f_dentry->d_name.len, file->f_dentry->d_name.name);
+ file->f_path.dentry->d_name.len, file->f_path.dentry->d_name.name);
spin_lock(&oi->ip_lock);
struct ocfs2_inode_info *oi = OCFS2_I(inode);
mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
- file->f_dentry->d_name.len,
- file->f_dentry->d_name.name);
+ file->f_path.dentry->d_name.len,
+ file->f_path.dentry->d_name.name);
spin_lock(&oi->ip_lock);
if (!--oi->ip_open_count)
((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)))
return 0;
+ if (vfsmnt->mnt_flags & MNT_RELATIME) {
+ if ((timespec_compare(&inode->i_atime, &inode->i_mtime) <= 0) ||
+ (timespec_compare(&inode->i_atime, &inode->i_ctime) <= 0))
+ return 1;
+
+ return 0;
+ }
+
now = CURRENT_TIME;
if ((now.tv_sec - inode->i_atime.tv_sec <= osb->s_atime_quantum))
return 0;
{
int ret, rw_level, have_alloc_sem = 0;
struct file *filp = iocb->ki_filp;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int appending = filp->f_flags & O_APPEND ? 1 : 0;
mlog_entry("(0x%p, %u, '%.*s')\n", filp,
(unsigned int)nr_segs,
- filp->f_dentry->d_name.len,
- filp->f_dentry->d_name.name);
+ filp->f_path.dentry->d_name.len,
+ filp->f_path.dentry->d_name.name);
/* happy write of zero bytes */
if (iocb->ki_left == 0)
goto out;
}
- ret = ocfs2_prepare_inode_for_write(filp->f_dentry, &iocb->ki_pos,
+ ret = ocfs2_prepare_inode_for_write(filp->f_path.dentry, &iocb->ki_pos,
iocb->ki_left, appending);
if (ret < 0) {
mlog_errno(ret);
unsigned int flags)
{
int ret;
- struct inode *inode = out->f_dentry->d_inode;
+ struct inode *inode = out->f_path.dentry->d_inode;
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
(unsigned int)len,
- out->f_dentry->d_name.len,
- out->f_dentry->d_name.name);
+ out->f_path.dentry->d_name.len,
+ out->f_path.dentry->d_name.name);
inode_double_lock(inode, pipe->inode);
goto out;
}
- ret = ocfs2_prepare_inode_for_write(out->f_dentry, ppos, len, 0);
+ ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0);
if (ret < 0) {
mlog_errno(ret);
goto out_unlock;
unsigned int flags)
{
int ret = 0;
- struct inode *inode = in->f_dentry->d_inode;
+ struct inode *inode = in->f_path.dentry->d_inode;
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", in, pipe,
(unsigned int)len,
- in->f_dentry->d_name.len,
- in->f_dentry->d_name.name);
+ in->f_path.dentry->d_name.len,
+ in->f_path.dentry->d_name.name);
/*
* See the comment in ocfs2_file_aio_read()
{
int ret = 0, rw_level = -1, have_alloc_sem = 0, lock_level = 0;
struct file *filp = iocb->ki_filp;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
mlog_entry("(0x%p, %u, '%.*s')\n", filp,
(unsigned int)nr_segs,
- filp->f_dentry->d_name.len,
- filp->f_dentry->d_name.name);
+ filp->f_path.dentry->d_name.len,
+ filp->f_path.dentry->d_name.name);
if (!inode) {
ret = -EINVAL;
{
int status;
+ if (ocfs2_mount_local(osb))
+ return 0;
+
status = o2hb_register_callback(&osb->osb_hb_down);
if (status < 0) {
mlog_errno(status);
{
int status;
+ if (ocfs2_mount_local(osb))
+ return;
+
status = o2hb_unregister_callback(&osb->osb_hb_down);
if (status < 0)
mlog_errno(status);
int ret;
char *argv[5], *envp[3];
+ if (ocfs2_mount_local(osb))
+ return;
+
if (!osb->uuid_str) {
/* This can happen if we don't get far enough in mount... */
mlog(0, "No UUID with which to stop heartbeat!\n\n");
* cluster lock before trusting anything anyway.
*/
can_lock = !(args->fi_flags & OCFS2_FI_FLAG_SYSFILE)
- && !(args->fi_flags & OCFS2_FI_FLAG_NOLOCK);
+ && !(args->fi_flags & OCFS2_FI_FLAG_NOLOCK)
+ && !ocfs2_mount_local(osb);
/*
* To maintain backwards compatibility with older versions of
ocfs2_abort(osb->sb, "Detected aborted journal");
handle = ERR_PTR(-EROFS);
}
- } else
- atomic_inc(&(osb->journal->j_num_trans));
+ } else {
+ if (!ocfs2_mount_local(osb))
+ atomic_inc(&(osb->journal->j_num_trans));
+ }
return handle;
}
BUG_ON(atomic_read(&(osb->journal->j_num_trans)) != 0);
- status = ocfs2_journal_toggle_dirty(osb, 0);
- if (status < 0)
- mlog_errno(status);
+ if (ocfs2_mount_local(osb)) {
+ journal_lock_updates(journal->j_journal);
+ status = journal_flush(journal->j_journal);
+ journal_unlock_updates(journal->j_journal);
+ if (status < 0)
+ mlog_errno(status);
+ }
+
+ if (status == 0) {
+ /*
+ * Do not toggle if flush was unsuccessful otherwise
+ * will leave dirty metadata in a "clean" journal
+ */
+ status = ocfs2_journal_toggle_dirty(osb, 0);
+ if (status < 0)
+ mlog_errno(status);
+ }
/* Shutdown the kernel journal system */
journal_destroy(journal->j_journal);
}
}
-int ocfs2_journal_load(struct ocfs2_journal *journal)
+int ocfs2_journal_load(struct ocfs2_journal *journal, int local)
{
int status = 0;
struct ocfs2_super *osb;
}
/* Launch the commit thread */
- osb->commit_task = kthread_run(ocfs2_commit_thread, osb, "ocfs2cmt");
- if (IS_ERR(osb->commit_task)) {
- status = PTR_ERR(osb->commit_task);
+ if (!local) {
+ osb->commit_task = kthread_run(ocfs2_commit_thread, osb,
+ "ocfs2cmt");
+ if (IS_ERR(osb->commit_task)) {
+ status = PTR_ERR(osb->commit_task);
+ osb->commit_task = NULL;
+ mlog(ML_ERROR, "unable to launch ocfs2commit thread, "
+ "error=%d", status);
+ goto done;
+ }
+ } else
osb->commit_task = NULL;
- mlog(ML_ERROR, "unable to launch ocfs2commit thread, error=%d",
- status);
- goto done;
- }
done:
mlog_exit(status);
void ocfs2_journal_shutdown(struct ocfs2_super *osb);
int ocfs2_journal_wipe(struct ocfs2_journal *journal,
int full);
-int ocfs2_journal_load(struct ocfs2_journal *journal);
+int ocfs2_journal_load(struct ocfs2_journal *journal, int local);
int ocfs2_check_journals_nolocks(struct ocfs2_super *osb);
void ocfs2_recovery_thread(struct ocfs2_super *osb,
int node_num);
{
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
+ if (ocfs2_mount_local(osb))
+ return;
+
if (!ocfs2_inode_fully_checkpointed(inode)) {
/* WARNING: This only kicks off a single
* checkpoint. If someone races you and adds more
{
int status;
- *ac = kcalloc(1, sizeof(struct ocfs2_alloc_context), GFP_KERNEL);
+ *ac = kzalloc(sizeof(struct ocfs2_alloc_context), GFP_KERNEL);
if (!(*ac)) {
status = -ENOMEM;
mlog_errno(status);
int ocfs2_mmap(struct file *file, struct vm_area_struct *vma)
{
int ret = 0, lock_level = 0;
+ struct ocfs2_super *osb = OCFS2_SB(file->f_dentry->d_inode->i_sb);
/* We don't want to support shared writable mappings yet. */
- if (((vma->vm_flags & VM_SHARED) || (vma->vm_flags & VM_MAYSHARE))
- && ((vma->vm_flags & VM_WRITE) || (vma->vm_flags & VM_MAYWRITE))) {
+ if (!ocfs2_mount_local(osb) &&
+ ((vma->vm_flags & VM_SHARED) || (vma->vm_flags & VM_MAYSHARE)) &&
+ ((vma->vm_flags & VM_WRITE) || (vma->vm_flags & VM_MAYWRITE))) {
mlog(0, "disallow shared writable mmaps %lx\n", vma->vm_flags);
/* This is -EINVAL because generic_file_readonly_mmap
* returns it in a similar situation. */
}
ocfs2_inode_set_new(osb, inode);
- status = ocfs2_create_new_inode_locks(inode);
- if (status < 0)
- mlog_errno(status);
+ if (!ocfs2_mount_local(osb)) {
+ status = ocfs2_create_new_inode_locks(inode);
+ if (status < 0)
+ mlog_errno(status);
+ }
status = 0; /* error in ocfs2_create_new_inode_locks is not
* critical */
return ret;
}
+static inline int ocfs2_mount_local(struct ocfs2_super *osb)
+{
+ return (osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT);
+}
+
#define OCFS2_IS_VALID_DINODE(ptr) \
(!strcmp((ptr)->i_signature, OCFS2_INODE_SIGNATURE))
OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
#define OCFS2_FEATURE_COMPAT_SUPP 0
-#define OCFS2_FEATURE_INCOMPAT_SUPP 0
+#define OCFS2_FEATURE_INCOMPAT_SUPP OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT
#define OCFS2_FEATURE_RO_COMPAT_SUPP 0
/*
*/
#define OCFS2_FEATURE_INCOMPAT_HEARTBEAT_DEV 0x0002
+/*
+ * tunefs sets this incompat flag before starting the resize and clears it
+ * at the end. This flag protects users from inadvertently mounting the fs
+ * after an aborted run without fsck-ing.
+ */
+#define OCFS2_FEATURE_INCOMPAT_RESIZE_INPROG 0x0004
+
+/* Used to denote a non-clustered volume */
+#define OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT 0x0008
+
+/* Support for sparse allocation in b-trees */
+#define OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC 0x0010
/*
* Flags on ocfs2_dinode.i_flags
struct buffer_head *bh = NULL;
struct ocfs2_slot_info *si;
- si = kcalloc(1, sizeof(struct ocfs2_slot_info), GFP_KERNEL);
+ si = kzalloc(sizeof(struct ocfs2_slot_info), GFP_KERNEL);
if (!si) {
status = -ENOMEM;
mlog_errno(status);
int status;
u32 slot;
- *ac = kcalloc(1, sizeof(struct ocfs2_alloc_context), GFP_KERNEL);
+ *ac = kzalloc(sizeof(struct ocfs2_alloc_context), GFP_KERNEL);
if (!(*ac)) {
status = -ENOMEM;
mlog_errno(status);
{
int status;
- *ac = kcalloc(1, sizeof(struct ocfs2_alloc_context), GFP_KERNEL);
+ *ac = kzalloc(sizeof(struct ocfs2_alloc_context), GFP_KERNEL);
if (!(*ac)) {
status = -ENOMEM;
mlog_errno(status);
mlog_entry_void();
- *ac = kcalloc(1, sizeof(struct ocfs2_alloc_context), GFP_KERNEL);
+ *ac = kzalloc(sizeof(struct ocfs2_alloc_context), GFP_KERNEL);
if (!(*ac)) {
status = -ENOMEM;
mlog_errno(status);
return status;
}
+static int ocfs2_verify_heartbeat(struct ocfs2_super *osb)
+{
+ if (ocfs2_mount_local(osb)) {
+ if (osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL) {
+ mlog(ML_ERROR, "Cannot heartbeat on a locally "
+ "mounted device.\n");
+ return -EINVAL;
+ }
+ }
+
+ if (!(osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL)) {
+ if (!ocfs2_mount_local(osb) && !ocfs2_is_hard_readonly(osb)) {
+ mlog(ML_ERROR, "Heartbeat has to be started to mount "
+ "a read-write clustered device.\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static int ocfs2_fill_super(struct super_block *sb, void *data, int silent)
{
struct dentry *root;
struct inode *inode = NULL;
struct ocfs2_super *osb = NULL;
struct buffer_head *bh = NULL;
+ char nodestr[8];
mlog_entry("%p, %p, %i", sb, data, silent);
- /* for now we only have one cluster/node, make sure we see it
- * in the heartbeat universe */
- if (!o2hb_check_local_node_heartbeating()) {
+ if (!ocfs2_parse_options(sb, data, &parsed_opt, 0)) {
status = -EINVAL;
goto read_super_error;
}
+ /* for now we only have one cluster/node, make sure we see it
+ * in the heartbeat universe */
+ if (parsed_opt & OCFS2_MOUNT_HB_LOCAL) {
+ if (!o2hb_check_local_node_heartbeating()) {
+ status = -EINVAL;
+ goto read_super_error;
+ }
+ }
+
/* probe for superblock */
status = ocfs2_sb_probe(sb, &bh, §or_size);
if (status < 0) {
}
brelse(bh);
bh = NULL;
-
- if (!ocfs2_parse_options(sb, data, &parsed_opt, 0)) {
- status = -EINVAL;
- goto read_super_error;
- }
osb->s_mount_opt = parsed_opt;
sb->s_magic = OCFS2_SUPER_MAGIC;
}
if (!ocfs2_is_hard_readonly(osb)) {
- /* If this isn't a hard readonly mount, then we need
- * to make sure that heartbeat is in a valid state,
- * and that we mark ourselves soft readonly is -oro
- * was specified. */
- if (!(osb->s_mount_opt & OCFS2_MOUNT_HB_LOCAL)) {
- mlog(ML_ERROR, "No heartbeat for device (%s)\n",
- sb->s_id);
- status = -EINVAL;
- goto read_super_error;
- }
-
if (sb->s_flags & MS_RDONLY)
ocfs2_set_ro_flag(osb, 0);
}
+ status = ocfs2_verify_heartbeat(osb);
+ if (status < 0) {
+ mlog_errno(status);
+ goto read_super_error;
+ }
+
osb->osb_debug_root = debugfs_create_dir(osb->uuid_str,
ocfs2_debugfs_root);
if (!osb->osb_debug_root) {
ocfs2_complete_mount_recovery(osb);
- printk(KERN_INFO "ocfs2: Mounting device (%s) on (node %d, slot %d) "
+ if (ocfs2_mount_local(osb))
+ snprintf(nodestr, sizeof(nodestr), "local");
+ else
+ snprintf(nodestr, sizeof(nodestr), "%d", osb->node_num);
+
+ printk(KERN_INFO "ocfs2: Mounting device (%s) on (node %s, slot %d) "
"with %s data mode.\n",
- osb->dev_str, osb->node_num, osb->slot_num,
+ osb->dev_str, nodestr, osb->slot_num,
osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK ? "writeback" :
"ordered");
/* XXX hold a ref on the node while mounte? easy enough, if
* desirable. */
- osb->node_num = o2nm_this_node();
+ if (ocfs2_mount_local(osb))
+ osb->node_num = 0;
+ else
+ osb->node_num = o2nm_this_node();
+
if (osb->node_num == O2NM_MAX_NODES) {
mlog(ML_ERROR, "could not find this host's node number\n");
status = -ENOENT;
goto leave;
}
+ if (ocfs2_mount_local(osb))
+ goto leave;
+
/* This should be sent *after* we recovered our journal as it
* will cause other nodes to unmark us as needing
* recovery. However, we need to send it *before* dropping the
{
int tmp;
struct ocfs2_super *osb = NULL;
+ char nodestr[8];
mlog_entry("(0x%p)\n", sb);
atomic_set(&osb->vol_state, VOLUME_DISMOUNTED);
- printk(KERN_INFO "ocfs2: Unmounting device (%s) on (node %d)\n",
- osb->dev_str, osb->node_num);
+ if (ocfs2_mount_local(osb))
+ snprintf(nodestr, sizeof(nodestr), "local");
+ else
+ snprintf(nodestr, sizeof(nodestr), "%d", osb->node_num);
+
+ printk(KERN_INFO "ocfs2: Unmounting device (%s) on (node %s)\n",
+ osb->dev_str, nodestr);
ocfs2_delete_osb(osb);
kfree(osb);
BUG_ON(uuid_bytes != OCFS2_VOL_UUID_LEN);
- osb->uuid_str = kcalloc(1, OCFS2_VOL_UUID_LEN * 2 + 1, GFP_KERNEL);
+ osb->uuid_str = kzalloc(OCFS2_VOL_UUID_LEN * 2 + 1, GFP_KERNEL);
if (osb->uuid_str == NULL)
return -ENOMEM;
mlog_entry_void();
- osb = kcalloc(1, sizeof(struct ocfs2_super), GFP_KERNEL);
+ osb = kzalloc(sizeof(struct ocfs2_super), GFP_KERNEL);
if (!osb) {
status = -ENOMEM;
mlog_errno(status);
*/
/* initialize our journal structure */
- journal = kcalloc(1, sizeof(struct ocfs2_journal), GFP_KERNEL);
+ journal = kzalloc(sizeof(struct ocfs2_journal), GFP_KERNEL);
if (!journal) {
mlog(ML_ERROR, "unable to alloc journal\n");
status = -ENOMEM;
{
int status = 0;
int dirty;
+ int local;
struct ocfs2_dinode *local_alloc = NULL; /* only used if we
* recover
* ourselves. */
"recovering volume.\n");
}
+ local = ocfs2_mount_local(osb);
+
/* will play back anything left in the journal. */
- ocfs2_journal_load(osb->journal);
+ ocfs2_journal_load(osb->journal, local);
if (dirty) {
/* recover my local alloc if we didn't unmount cleanly. */
{
struct ocfs2_net_wait_ctxt *w;
- w = kcalloc(1, sizeof(*w), GFP_NOFS);
+ w = kzalloc(sizeof(*w), GFP_NOFS);
if (!w) {
mlog_errno(-ENOMEM);
goto bail;
BUG_ON(!ocfs2_is_valid_vote_request(type));
- request = kcalloc(1, sizeof(*request), GFP_NOFS);
+ request = kzalloc(sizeof(*request), GFP_NOFS);
if (!request) {
mlog_errno(-ENOMEM);
} else {
{
int status = 0;
+ if (ocfs2_mount_local(osb))
+ return 0;
+
status = o2net_register_handler(OCFS2_MESSAGE_TYPE_RESPONSE,
osb->net_key,
sizeof(struct ocfs2_response_msg),
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs_native(file->f_dentry, &tmp);
+ error = vfs_statfs_native(file->f_path.dentry, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);
file = fget(fd);
if (!file)
goto out;
- error = vfs_statfs64(file->f_dentry, &tmp);
+ error = vfs_statfs64(file->f_path.dentry, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
fput(file);
if (file->f_flags & O_LARGEFILE)
small = 0;
- dentry = file->f_dentry;
+ dentry = file->f_path.dentry;
inode = dentry->d_inode;
error = -EINVAL;
if (!S_ISREG(inode->i_mode) || !(file->f_mode & FMODE_WRITE))
if (!file)
goto out;
- dentry = file->f_dentry;
- mnt = file->f_vfsmnt;
+ dentry = file->f_path.dentry;
+ mnt = file->f_path.mnt;
inode = dentry->d_inode;
error = -ENOTDIR;
if (!file)
goto out;
- dentry = file->f_dentry;
+ dentry = file->f_path.dentry;
inode = dentry->d_inode;
audit_inode(NULL, inode);
if (!file)
goto out;
- dentry = file->f_dentry;
+ dentry = file->f_path.dentry;
audit_inode(NULL, dentry->d_inode);
error = chown_common(dentry, user, group);
fput(file);
}
f->f_mapping = inode->i_mapping;
- f->f_dentry = dentry;
- f->f_vfsmnt = mnt;
+ f->f_path.dentry = dentry;
+ f->f_path.mnt = mnt;
f->f_pos = 0;
f->f_op = fops_get(inode->i_fop);
file_move(f, &inode->i_sb->s_files);
if (f->f_mode & FMODE_WRITE)
put_write_access(inode);
file_kill(f);
- f->f_dentry = NULL;
- f->f_vfsmnt = NULL;
+ f->f_path.dentry = NULL;
+ f->f_path.mnt = NULL;
cleanup_file:
put_filp(f);
dput(dentry);
/* Pick up the filp from the open intent */
filp = nd->intent.open.file;
/* Has the filesystem initialised the file for us? */
- if (filp->f_dentry == NULL)
+ if (filp->f_path.dentry == NULL)
filp = __dentry_open(nd->dentry, nd->mnt, flags, filp, NULL);
else
path_release(nd);
repeat:
fdt = files_fdtable(files);
- fd = find_next_zero_bit(fdt->open_fds->fds_bits,
- fdt->max_fdset,
+ fd = find_next_zero_bit(fdt->open_fds->fds_bits, fdt->max_fds,
files->next_fd);
/*
put_unused_fd(fd);
fd = PTR_ERR(f);
} else {
- fsnotify_open(f->f_dentry);
+ fsnotify_open(f->f_path.dentry);
fd_install(fd, f);
}
}
asmlinkage long sys_vhangup(void)
{
if (capable(CAP_SYS_TTY_CONFIG)) {
+ /* XXX: this needs locking */
tty_vhangup(current->signal->tty);
return 0;
}
static int openpromfs_readdir(struct file * filp, void * dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct op_inode_info *oi = OP_I(inode);
struct device_node *dp = oi->u.node;
struct device_node *child;
config SGI_PARTITION
bool "SGI partition support" if PARTITION_ADVANCED
- default y if (SGI_IP22 || SGI_IP27 || ((MACH_JAZZ || SNI_RM200_PCI) && !CPU_LITTLE_ENDIAN))
+ default y if (SGI_IP22 || SGI_IP27 || ((MACH_JAZZ || SNI_RM) && !CPU_LITTLE_ENDIAN))
help
Say Y here if you would like to be able to read the hard disk
partition table format used by SGI machines.
.show = part_stat_read
};
+#ifdef CONFIG_FAIL_MAKE_REQUEST
+
+static ssize_t part_fail_store(struct hd_struct * p,
+ const char *buf, size_t count)
+{
+ int i;
+
+ if (count > 0 && sscanf(buf, "%d", &i) > 0)
+ p->make_it_fail = (i == 0) ? 0 : 1;
+
+ return count;
+}
+static ssize_t part_fail_read(struct hd_struct * p, char *page)
+{
+ return sprintf(page, "%d\n", p->make_it_fail);
+}
+static struct part_attribute part_attr_fail = {
+ .attr = {.name = "make-it-fail", .mode = S_IRUGO | S_IWUSR },
+ .store = part_fail_store,
+ .show = part_fail_read
+};
+
+#endif
+
static struct attribute * default_attrs[] = {
&part_attr_uevent.attr,
&part_attr_dev.attr,
&part_attr_start.attr,
&part_attr_size.attr,
&part_attr_stat.attr,
+#ifdef CONFIG_FAIL_MAKE_REQUEST
+ &part_attr_fail.attr,
+#endif
NULL,
};
return 0;
}
-static struct pipe_buf_operations anon_pipe_buf_ops = {
+static const struct pipe_buf_operations anon_pipe_buf_ops = {
.can_merge = 1,
.map = generic_pipe_buf_map,
.unmap = generic_pipe_buf_unmap,
unsigned long nr_segs, loff_t pos)
{
struct file *filp = iocb->ki_filp;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct pipe_inode_info *pipe;
int do_wakeup;
ssize_t ret;
if (bufs) {
int curbuf = pipe->curbuf;
struct pipe_buffer *buf = pipe->bufs + curbuf;
- struct pipe_buf_operations *ops = buf->ops;
+ const struct pipe_buf_operations *ops = buf->ops;
void *addr;
size_t chars = buf->len;
int error, atomic;
unsigned long nr_segs, loff_t ppos)
{
struct file *filp = iocb->ki_filp;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct pipe_inode_info *pipe;
ssize_t ret;
int do_wakeup;
int lastbuf = (pipe->curbuf + pipe->nrbufs - 1) &
(PIPE_BUFFERS-1);
struct pipe_buffer *buf = pipe->bufs + lastbuf;
- struct pipe_buf_operations *ops = buf->ops;
+ const struct pipe_buf_operations *ops = buf->ops;
int offset = buf->offset + buf->len;
if (ops->can_merge && offset + chars <= PAGE_SIZE) {
pipe_ioctl(struct inode *pino, struct file *filp,
unsigned int cmd, unsigned long arg)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct pipe_inode_info *pipe;
int count, buf, nrbufs;
pipe_poll(struct file *filp, poll_table *wait)
{
unsigned int mask;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct pipe_inode_info *pipe = inode->i_pipe;
int nrbufs;
static int
pipe_read_fasync(int fd, struct file *filp, int on)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int retval;
mutex_lock(&inode->i_mutex);
static int
pipe_write_fasync(int fd, struct file *filp, int on)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int retval;
mutex_lock(&inode->i_mutex);
static int
pipe_rdwr_fasync(int fd, struct file *filp, int on)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct pipe_inode_info *pipe = inode->i_pipe;
int retval;
.fasync = pipe_rdwr_fasync,
};
-static struct file_operations read_pipe_fops = {
+static const struct file_operations read_pipe_fops = {
.llseek = no_llseek,
.read = do_sync_read,
.aio_read = pipe_read,
.fasync = pipe_read_fasync,
};
-static struct file_operations write_pipe_fops = {
+static const struct file_operations write_pipe_fops = {
.llseek = no_llseek,
.read = bad_pipe_r,
.write = do_sync_write,
.fasync = pipe_write_fasync,
};
-static struct file_operations rdwr_pipe_fops = {
+static const struct file_operations rdwr_pipe_fops = {
.llseek = no_llseek,
.read = do_sync_read,
.aio_read = pipe_read,
*/
dentry->d_flags &= ~DCACHE_UNHASHED;
d_instantiate(dentry, inode);
- f->f_vfsmnt = mntget(pipe_mnt);
- f->f_dentry = dentry;
+ f->f_path.mnt = mntget(pipe_mnt);
+ f->f_path.dentry = dentry;
f->f_mapping = inode->i_mapping;
f->f_flags = O_WRONLY;
void free_write_pipe(struct file *f)
{
- mntput(f->f_vfsmnt);
- dput(f->f_dentry);
+ mntput(f->f_path.mnt);
+ dput(f->f_path.dentry);
put_filp(f);
}
return ERR_PTR(-ENFILE);
/* Grab pipe from the writer */
- f->f_vfsmnt = mntget(wrf->f_vfsmnt);
- f->f_dentry = dget(wrf->f_dentry);
- f->f_mapping = wrf->f_dentry->d_inode->i_mapping;
+ f->f_path.mnt = mntget(wrf->f_path.mnt);
+ f->f_path.dentry = dget(wrf->f_path.dentry);
+ f->f_mapping = wrf->f_path.dentry->d_inode->i_mapping;
f->f_pos = 0;
f->f_flags = O_RDONLY;
* Author : Ram Pai (linuxram@us.ibm.com)
*
*/
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include <linux/mount.h>
#include <linux/fs.h>
#include "pnode.h"
#define IS_MNT_SHARED(mnt) (mnt->mnt_flags & MNT_SHARED)
#define IS_MNT_SLAVE(mnt) (mnt->mnt_master)
-#define IS_MNT_NEW(mnt) (!mnt->mnt_namespace)
+#define IS_MNT_NEW(mnt) (!mnt->mnt_ns)
#define CLEAR_MNT_SHARED(mnt) (mnt->mnt_flags &= ~MNT_SHARED)
#define IS_MNT_UNBINDABLE(mnt) (mnt->mnt_flags & MNT_UNBINDABLE)
sigemptyset(&sigcatch);
cutime = cstime = utime = stime = cputime_zero;
- mutex_lock(&tty_mutex);
rcu_read_lock();
if (lock_task_sighand(task, &flags)) {
struct signal_struct *sig = task->signal;
- struct tty_struct *tty = sig->tty;
-
- if (tty) {
- /*
- * sig->tty is not stable, but tty_mutex
- * protects us from release_dev(tty)
- */
- barrier();
- tty_pgrp = tty->pgrp;
- tty_nr = new_encode_dev(tty_devnum(tty));
+
+ if (sig->tty) {
+ tty_pgrp = sig->tty->pgrp;
+ tty_nr = new_encode_dev(tty_devnum(sig->tty));
}
num_threads = atomic_read(&sig->count);
stime = cputime_add(stime, sig->stime);
}
- sid = sig->session;
+ sid = signal_session(sig);
pgid = process_group(task);
ppid = rcu_dereference(task->real_parent)->tgid;
unlock_task_sighand(task, &flags);
}
rcu_read_unlock();
- mutex_unlock(&tty_mutex);
if (!whole || num_threads<2)
wchan = get_wchan(task);
#include <linux/string.h>
#include <linux/seq_file.h>
#include <linux/namei.h>
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include <linux/mm.h>
#include <linux/smp_lock.h>
#include <linux/rcupdate.h>
static int mounts_open(struct inode *inode, struct file *file)
{
struct task_struct *task = get_proc_task(inode);
- struct namespace *namespace = NULL;
+ struct mnt_namespace *ns = NULL;
struct proc_mounts *p;
int ret = -EINVAL;
if (task) {
task_lock(task);
- namespace = task->nsproxy->namespace;
- if (namespace)
- get_namespace(namespace);
+ ns = task->nsproxy->mnt_ns;
+ if (ns)
+ get_mnt_ns(ns);
task_unlock(task);
put_task_struct(task);
}
- if (namespace) {
+ if (ns) {
ret = -ENOMEM;
p = kmalloc(sizeof(struct proc_mounts), GFP_KERNEL);
if (p) {
file->private_data = &p->m;
ret = seq_open(file, &mounts_op);
if (!ret) {
- p->m.private = namespace;
- p->event = namespace->event;
+ p->m.private = ns;
+ p->event = ns->event;
return 0;
}
kfree(p);
}
- put_namespace(namespace);
+ put_mnt_ns(ns);
}
return ret;
}
static int mounts_release(struct inode *inode, struct file *file)
{
struct seq_file *m = file->private_data;
- struct namespace *namespace = m->private;
- put_namespace(namespace);
+ struct mnt_namespace *ns = m->private;
+ put_mnt_ns(ns);
return seq_release(inode, file);
}
static unsigned mounts_poll(struct file *file, poll_table *wait)
{
struct proc_mounts *p = file->private_data;
- struct namespace *ns = p->m.private;
+ struct mnt_namespace *ns = p->m.private;
unsigned res = 0;
poll_wait(file, &ns->poll, wait);
if (!ret) {
struct seq_file *m = file->private_data;
- struct namespace *namespace = NULL;
+ struct mnt_namespace *mnt_ns = NULL;
struct task_struct *task = get_proc_task(inode);
if (task) {
task_lock(task);
if (task->nsproxy)
- namespace = task->nsproxy->namespace;
- if (namespace)
- get_namespace(namespace);
+ mnt_ns = task->nsproxy->mnt_ns;
+ if (mnt_ns)
+ get_mnt_ns(mnt_ns);
task_unlock(task);
put_task_struct(task);
}
- if (namespace)
- m->private = namespace;
+ if (mnt_ns)
+ m->private = mnt_ns;
else {
seq_release(inode, file);
ret = -EINVAL;
static ssize_t proc_info_read(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
- struct inode * inode = file->f_dentry->d_inode;
+ struct inode * inode = file->f_path.dentry->d_inode;
unsigned long page;
ssize_t length;
struct task_struct *task = get_proc_task(inode);
static ssize_t mem_read(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
- struct task_struct *task = get_proc_task(file->f_dentry->d_inode);
+ struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode);
char *page;
unsigned long src = *ppos;
int ret = -ESRCH;
{
int copied;
char *page;
- struct task_struct *task = get_proc_task(file->f_dentry->d_inode);
+ struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode);
unsigned long dst = *ppos;
copied = -ESRCH;
static ssize_t oom_adjust_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct task_struct *task = get_proc_task(file->f_dentry->d_inode);
+ struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode);
char buffer[PROC_NUMBUF];
size_t len;
int oom_adjust;
return -EINVAL;
if (*end == '\n')
end++;
- task = get_proc_task(file->f_dentry->d_inode);
+ task = get_proc_task(file->f_path.dentry->d_inode);
if (!task)
return -ESRCH;
if (oom_adjust < task->oomkilladj && !capable(CAP_SYS_RESOURCE)) {
static ssize_t proc_loginuid_read(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
- struct inode * inode = file->f_dentry->d_inode;
+ struct inode * inode = file->f_path.dentry->d_inode;
struct task_struct *task = get_proc_task(inode);
ssize_t length;
char tmpbuf[TMPBUFLEN];
static ssize_t proc_loginuid_write(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
- struct inode * inode = file->f_dentry->d_inode;
+ struct inode * inode = file->f_path.dentry->d_inode;
char *page, *tmp;
ssize_t length;
uid_t loginuid;
};
#endif /* CONFIG_SECCOMP */
+#ifdef CONFIG_FAULT_INJECTION
+static ssize_t proc_fault_inject_read(struct file * file, char __user * buf,
+ size_t count, loff_t *ppos)
+{
+ struct task_struct *task = get_proc_task(file->f_dentry->d_inode);
+ char buffer[PROC_NUMBUF];
+ size_t len;
+ int make_it_fail;
+ loff_t __ppos = *ppos;
+
+ if (!task)
+ return -ESRCH;
+ make_it_fail = task->make_it_fail;
+ put_task_struct(task);
+
+ len = snprintf(buffer, sizeof(buffer), "%i\n", make_it_fail);
+ if (__ppos >= len)
+ return 0;
+ if (count > len-__ppos)
+ count = len-__ppos;
+ if (copy_to_user(buf, buffer + __ppos, count))
+ return -EFAULT;
+ *ppos = __ppos + count;
+ return count;
+}
+
+static ssize_t proc_fault_inject_write(struct file * file,
+ const char __user * buf, size_t count, loff_t *ppos)
+{
+ struct task_struct *task;
+ char buffer[PROC_NUMBUF], *end;
+ int make_it_fail;
+
+ if (!capable(CAP_SYS_RESOURCE))
+ return -EPERM;
+ memset(buffer, 0, sizeof(buffer));
+ if (count > sizeof(buffer) - 1)
+ count = sizeof(buffer) - 1;
+ if (copy_from_user(buffer, buf, count))
+ return -EFAULT;
+ make_it_fail = simple_strtol(buffer, &end, 0);
+ if (*end == '\n')
+ end++;
+ task = get_proc_task(file->f_dentry->d_inode);
+ if (!task)
+ return -ESRCH;
+ task->make_it_fail = make_it_fail;
+ put_task_struct(task);
+ if (end - buffer == 0)
+ return -EIO;
+ return end - buffer;
+}
+
+static struct file_operations proc_fault_inject_operations = {
+ .read = proc_fault_inject_read,
+ .write = proc_fault_inject_write,
+};
+#endif
+
static void *proc_pid_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct inode *inode = dentry->d_inode;
char *name, int len,
instantiate_t instantiate, struct task_struct *task, void *ptr)
{
- struct dentry *child, *dir = filp->f_dentry;
+ struct dentry *child, *dir = filp->f_path.dentry;
struct inode *inode;
struct qstr qname;
ino_t ino = 0;
spin_lock(&files->file_lock);
file = fcheck_files(files, fd);
if (file) {
- *mnt = mntget(file->f_vfsmnt);
- *dentry = dget(file->f_dentry);
+ *mnt = mntget(file->f_path.mnt);
+ *dentry = dget(file->f_path.dentry);
spin_unlock(&files->file_lock);
put_files_struct(files);
return 0;
static int proc_readfd(struct file * filp, void * dirent, filldir_t filldir)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct task_struct *p = get_proc_task(inode);
unsigned int fd, tid, ino;
{
int i;
int pid;
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct task_struct *task = get_proc_task(inode);
struct pid_entry *p, *last;
static ssize_t proc_pid_attr_read(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
- struct inode * inode = file->f_dentry->d_inode;
+ struct inode * inode = file->f_path.dentry->d_inode;
unsigned long page;
ssize_t length;
struct task_struct *task = get_proc_task(inode);
goto out;
length = security_getprocattr(task,
- (char*)file->f_dentry->d_name.name,
+ (char*)file->f_path.dentry->d_name.name,
(void*)page, count);
if (length >= 0)
length = simple_read_from_buffer(buf, count, ppos, (char *)page, length);
static ssize_t proc_pid_attr_write(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
- struct inode * inode = file->f_dentry->d_inode;
+ struct inode * inode = file->f_path.dentry->d_inode;
char *page;
ssize_t length;
struct task_struct *task = get_proc_task(inode);
goto out_free;
length = security_setprocattr(task,
- (char*)file->f_dentry->d_name.name,
+ (char*)file->f_path.dentry->d_name.name,
(void*)page, count);
out_free:
free_page((unsigned long) page);
proc_base_instantiate, task, p);
}
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+static int proc_pid_io_accounting(struct task_struct *task, char *buffer)
+{
+ return sprintf(buffer,
+ "rchar: %llu\n"
+ "wchar: %llu\n"
+ "syscr: %llu\n"
+ "syscw: %llu\n"
+ "read_bytes: %llu\n"
+ "write_bytes: %llu\n"
+ "cancelled_write_bytes: %llu\n",
+ (unsigned long long)task->rchar,
+ (unsigned long long)task->wchar,
+ (unsigned long long)task->syscr,
+ (unsigned long long)task->syscw,
+ (unsigned long long)task->ioac.read_bytes,
+ (unsigned long long)task->ioac.write_bytes,
+ (unsigned long long)task->ioac.cancelled_write_bytes);
+}
+#endif
+
/*
* Thread groups
*/
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, loginuid),
#endif
+#ifdef CONFIG_FAULT_INJECTION
+ REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject),
+#endif
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+ INF("io", S_IRUGO, pid_io_accounting),
+#endif
};
static int proc_tgid_base_readdir(struct file * filp,
int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir)
{
unsigned int nr = filp->f_pos - FIRST_PROCESS_ENTRY;
- struct task_struct *reaper = get_proc_task(filp->f_dentry->d_inode);
+ struct task_struct *reaper = get_proc_task(filp->f_path.dentry->d_inode);
struct task_struct *task;
int tgid;
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, loginuid),
#endif
+#ifdef CONFIG_FAULT_INJECTION
+ REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject),
+#endif
};
static int proc_tid_base_readdir(struct file * filp,
/* for the /proc/TGID/task/ directories */
static int proc_task_readdir(struct file * filp, void * dirent, filldir_t filldir)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct task_struct *leader = get_proc_task(inode);
struct task_struct *task;
proc_file_read(struct file *file, char __user *buf, size_t nbytes,
loff_t *ppos)
{
- struct inode * inode = file->f_dentry->d_inode;
+ struct inode * inode = file->f_path.dentry->d_inode;
char *page;
ssize_t retval=0;
int eof=0;
proc_file_write(struct file *file, const char __user *buffer,
size_t count, loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct proc_dir_entry * dp;
dp = PDE(inode);
struct proc_dir_entry * de;
unsigned int ino;
int i;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
int ret = 0;
lock_kernel();
/* fall through */
case 1:
if (filldir(dirent, "..", 2, i,
- parent_ino(filp->f_dentry),
+ parent_ino(filp->f_path.dentry),
DT_DIR) < 0)
goto out;
i++;
file_list_lock();
list_for_each(p, &sb->s_files) {
struct file * filp = list_entry(p, struct file, f_u.fu_list);
- struct dentry * dentry = filp->f_dentry;
+ struct dentry * dentry = filp->f_path.dentry;
struct inode * inode;
const struct file_operations *fops;
file = vma->vm_file;
if (file) {
- struct inode *inode = vma->vm_file->f_dentry->d_inode;
+ struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
dev = inode->i_sb->s_dev;
ino = inode->i_ino;
}
if (len < 1)
len = 1;
seq_printf(m, "%*c", len, ' ');
- seq_path(m, file->f_vfsmnt, file->f_dentry, "");
+ seq_path(m, file->f_path.mnt, file->f_path.dentry, "");
}
seq_putc(m, '\n');
#include <linux/seq_file.h>
#include <linux/times.h>
#include <linux/profile.h>
+#include <linux/utsname.h>
#include <linux/blkdev.h>
#include <linux/hugetlb.h>
#include <linux/jiffies.h>
#include <linux/sysrq.h>
#include <linux/vmalloc.h>
#include <linux/crash_dump.h>
-#include <linux/pspace.h>
+#include <linux/pid_namespace.h>
+#include <linux/compile.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/io.h>
LOAD_INT(a), LOAD_FRAC(a),
LOAD_INT(b), LOAD_FRAC(b),
LOAD_INT(c), LOAD_FRAC(c),
- nr_running(), nr_threads, init_pspace.last_pid);
+ nr_running(), nr_threads, current->nsproxy->pid_ns->last_pid);
return proc_calc_metrics(page, start, off, count, eof, len);
}
{
int len;
- strcpy(page, linux_banner);
- len = strlen(page);
+ /* FIXED STRING! Don't touch! */
+ len = snprintf(page, PAGE_SIZE,
+ "%s version %s"
+ " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ")"
+ " (" LINUX_COMPILER ")"
+ " %s\n",
+ utsname()->sysname,
+ utsname()->release,
+ utsname()->version);
return proc_calc_metrics(page, start, off, count, eof, len);
}
}
if (vma) {
- *mnt = mntget(vma->vm_file->f_vfsmnt);
- *dentry = dget(vma->vm_file->f_dentry);
+ *mnt = mntget(vma->vm_file->f_path.mnt);
+ *dentry = dget(vma->vm_file->f_path.dentry);
result = 0;
}
int len;
if (file) {
- struct inode *inode = vma->vm_file->f_dentry->d_inode;
+ struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
dev = inode->i_sb->s_dev;
ino = inode->i_ino;
}
*/
if (file) {
pad_len_spaces(m, len);
- seq_path(m, file->f_vfsmnt, file->f_dentry, "\n");
+ seq_path(m, file->f_path.mnt, file->f_path.dentry, "\n");
} else {
const char *name = arch_vma_name(vma);
if (!name) {
}
if (vma) {
- *mnt = mntget(vma->vm_file->f_vfsmnt);
- *dentry = dget(vma->vm_file->f_dentry);
+ *mnt = mntget(vma->vm_file->f_path.mnt);
+ *dentry = dget(vma->vm_file->f_path.dentry);
result = 0;
}
static int qnx4_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
unsigned int offset;
struct buffer_head *bh;
struct qnx4_inode_entry *de;
unsigned long pgoff, unsigned long flags)
{
unsigned long maxpages, lpages, nr, loop, ret;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct page **pages = NULL, **ptr, *page;
loff_t isize;
lock_kernel();
switch (origin) {
case 2:
- offset += i_size_read(file->f_dentry->d_inode);
+ offset += i_size_read(file->f_path.dentry->d_inode);
break;
case 1:
offset += file->f_pos;
}
retval = -EINVAL;
- if (offset>=0 && offset<=file->f_dentry->d_inode->i_sb->s_maxbytes) {
+ if (offset>=0 && offset<=file->f_path.dentry->d_inode->i_sb->s_maxbytes) {
if (offset != file->f_pos) {
file->f_pos = offset;
file->f_version = 0;
lock_kernel();
switch (origin) {
case 2:
- offset += i_size_read(file->f_dentry->d_inode);
+ offset += i_size_read(file->f_path.dentry->d_inode);
break;
case 1:
offset += file->f_pos;
if (unlikely((pos < 0) || (loff_t) (pos + count) < 0))
goto Einval;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if (unlikely(inode->i_flock && MANDATORY_LOCK(inode))) {
int retval = locks_mandatory_area(
read_write == READ ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE,
else
ret = do_sync_read(file, buf, count, pos);
if (ret > 0) {
- fsnotify_access(file->f_dentry);
+ fsnotify_access(file->f_path.dentry);
current->rchar += ret;
}
current->syscr++;
else
ret = do_sync_write(file, buf, count, pos);
if (ret > 0) {
- fsnotify_modify(file->f_dentry);
+ fsnotify_modify(file->f_path.dentry);
current->wchar += ret;
}
current->syscw++;
return seg;
}
-EXPORT_UNUSED_SYMBOL(iov_shorten); /* June 2006 */
-
ssize_t do_sync_readv_writev(struct file *filp, const struct iovec *iov,
unsigned long nr_segs, size_t len, loff_t *ppos, iov_fn_t fn)
{
kfree(iov);
if ((ret + (type == READ)) > 0) {
if (type == READ)
- fsnotify_access(file->f_dentry);
+ fsnotify_access(file->f_path.dentry);
else
- fsnotify_modify(file->f_dentry);
+ fsnotify_modify(file->f_path.dentry);
}
return ret;
}
if (!(in_file->f_mode & FMODE_READ))
goto fput_in;
retval = -EINVAL;
- in_inode = in_file->f_dentry->d_inode;
+ in_inode = in_file->f_path.dentry->d_inode;
if (!in_inode)
goto fput_in;
if (!in_file->f_op || !in_file->f_op->sendfile)
retval = -EINVAL;
if (!out_file->f_op || !out_file->f_op->sendpage)
goto fput_out;
- out_inode = out_file->f_dentry->d_inode;
+ out_inode = out_file->f_path.dentry->d_inode;
retval = rw_verify_area(WRITE, out_file, &out_file->f_pos, count);
if (retval < 0)
goto fput_out;
int vfs_readdir(struct file *file, filldir_t filler, void *buf)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int res = -ENOTDIR;
if (!file->f_op || !file->f_op->readdir)
goto out;
*/
static int get_left_neighbor(reiserfs_blocknr_hint_t * hint)
{
- struct path *path;
+ struct treepath *path;
struct buffer_head *bh;
struct item_head *ih;
int pos_in_item;
//
static int reiserfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct cpu_key pos_key; /* key of current position in the directory (key of directory entry) */
INITIALIZE_PATH(path_to_entry);
struct buffer_head *bh;
/* Ignore the .reiserfs_priv entry */
if (reiserfs_xattrs(inode->i_sb) &&
!old_format_only(inode->i_sb) &&
- filp->f_dentry == inode->i_sb->s_root &&
+ filp->f_path.dentry == inode->i_sb->s_root &&
REISERFS_SB(inode->i_sb)->priv_root &&
REISERFS_SB(inode->i_sb)->priv_root->d_inode
&& deh_objectid(deh) ==
loff_t pos; // Current position in the file.
ssize_t res; // return value of various functions that we call.
int err = 0;
- struct inode *inode = file->f_dentry->d_inode; // Inode of the file that we are writing to.
+ struct inode *inode = file->f_path.dentry->d_inode; // Inode of the file that we are writing to.
/* To simplify coding at this time, we store
locked pages in array for now */
struct page *prepared_pages[REISERFS_WRITE_PAGES_AT_A_TIME];
if (count == 0)
goto out;
- res = remove_suid(file->f_dentry);
+ res = remove_suid(file->f_path.dentry);
if (res)
goto out;
{
struct buffer_head *p_s_parent;
INITIALIZE_PATH(s_path_to_neighbor_father);
- struct path *p_s_path = p_s_tb->tb_path;
+ struct treepath *p_s_path = p_s_tb->tb_path;
struct cpu_key s_lr_father_key;
int n_counter,
n_position = INT_MAX,
*/
static int get_parents(struct tree_balance *p_s_tb, int n_h)
{
- struct path *p_s_path = p_s_tb->tb_path;
+ struct treepath *p_s_path = p_s_tb->tb_path;
int n_position,
n_ret_value,
n_path_offset = PATH_H_PATH_OFFSET(p_s_tb->tb_path, n_h);
static int get_direct_parent(struct tree_balance *p_s_tb, int n_h)
{
struct buffer_head *p_s_bh;
- struct path *p_s_path = p_s_tb->tb_path;
+ struct treepath *p_s_path = p_s_tb->tb_path;
int n_position,
n_path_offset = PATH_H_PATH_OFFSET(p_s_tb->tb_path, n_h);
}
/*static*/ int restart_transaction(struct reiserfs_transaction_handle *th,
- struct inode *inode, struct path *path)
+ struct inode *inode, struct treepath *path)
{
struct super_block *s = th->t_super;
int len = th->t_blocks_allocated;
long block,
struct inode *inode,
b_blocknr_t * allocated_block_nr,
- struct path *path, int flags)
+ struct treepath *path, int flags)
{
BUG_ON(!th->t_trans_id);
//
// called by read_locked_inode
-static void init_inode(struct inode *inode, struct path *path)
+static void init_inode(struct inode *inode, struct treepath *path)
{
struct buffer_head *bh;
struct item_head *ih;
/* NOTE, you must prepare the buffer head before sending it here,
** and then log it after the call
*/
-static void update_stat_data(struct path *path, struct inode *inode,
+static void update_stat_data(struct treepath *path, struct inode *inode,
loff_t size)
{
struct buffer_head *bh;
containing "." and ".." entries */
static int reiserfs_new_directory(struct reiserfs_transaction_handle *th,
struct inode *inode,
- struct item_head *ih, struct path *path,
+ struct item_head *ih, struct treepath *path,
struct inode *dir)
{
struct super_block *sb = th->t_super;
containing the body of symlink */
static int reiserfs_new_symlink(struct reiserfs_transaction_handle *th, struct inode *inode, /* Inode of symlink */
struct item_head *ih,
- struct path *path, const char *symname,
+ struct treepath *path, const char *symname,
int item_len)
{
struct super_block *sb = th->t_super;
long reiserfs_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int ret;
/* These are just misnamed, they actually get/put from/to user an int */
// comment? maybe something like set de to point to what the path points to?
static inline void set_de_item_location(struct reiserfs_dir_entry *de,
- struct path *path)
+ struct treepath *path)
{
de->de_bh = get_last_bh(path);
de->de_ih = get_ih(path);
/* The function is NOT SCHEDULE-SAFE! */
int search_by_entry_key(struct super_block *sb, const struct cpu_key *key,
- struct path *path, struct reiserfs_dir_entry *de)
+ struct treepath *path, struct reiserfs_dir_entry *de)
{
int retval;
// may return NAME_FOUND, NAME_FOUND_INVISIBLE, NAME_NOT_FOUND
// FIXME: should add something like IOERROR
static int reiserfs_find_entry(struct inode *dir, const char *name, int namelen,
- struct path *path_to_entry,
+ struct treepath *path_to_entry,
struct reiserfs_dir_entry *de)
{
struct cpu_key key_to_search;
}
#if defined( REISERFS_USE_OIDMAPF )
if (sb_info->oidmap.use_file && (sb_info->oidmap.mapf != NULL)) {
- loff_t size = sb_info->oidmap.mapf->f_dentry->d_inode->i_size;
+ loff_t size = sb_info->oidmap.mapf->f_path.dentry->d_inode->i_size;
total_used += size / sizeof(reiserfs_oidinterval_d_t);
}
#endif
of the path, and going upwards. We must check the path's validity at each step. If the key is not in
the path, there is no delimiting key in the tree (buffer is first or last buffer in tree), and in this
case we return a special key, either MIN_KEY or MAX_KEY. */
-static inline const struct reiserfs_key *get_lkey(const struct path
+static inline const struct reiserfs_key *get_lkey(const struct treepath
*p_s_chk_path,
const struct super_block
*p_s_sb)
}
/* Get delimiting key of the buffer at the path and its right neighbor. */
-inline const struct reiserfs_key *get_rkey(const struct path *p_s_chk_path,
+inline const struct reiserfs_key *get_rkey(const struct treepath *p_s_chk_path,
const struct super_block *p_s_sb)
{
int n_position, n_path_offset = p_s_chk_path->path_length;
the path. These delimiting keys are stored at least one level above that buffer in the tree. If the
buffer is the first or last node in the tree order then one of the delimiting keys may be absent, and in
this case get_lkey and get_rkey return a special key which is MIN_KEY or MAX_KEY. */
-static inline int key_in_buffer(struct path *p_s_chk_path, /* Path which should be checked. */
+static inline int key_in_buffer(struct treepath *p_s_chk_path, /* Path which should be checked. */
const struct cpu_key *p_s_key, /* Key which should be checked. */
struct super_block *p_s_sb /* Super block pointer. */
)
}
/* Decrement b_count field of the all buffers in the path. */
-void decrement_counters_in_path(struct path *p_s_search_path)
+void decrement_counters_in_path(struct treepath *p_s_search_path)
{
int n_path_offset = p_s_search_path->path_length;
p_s_search_path->path_length = ILLEGAL_PATH_ELEMENT_OFFSET;
}
-int reiserfs_check_path(struct path *p)
+int reiserfs_check_path(struct treepath *p)
{
RFALSE(p->path_length != ILLEGAL_PATH_ELEMENT_OFFSET,
"path not properly relsed");
**
** only called from fix_nodes()
*/
-void pathrelse_and_restore(struct super_block *s, struct path *p_s_search_path)
+void pathrelse_and_restore(struct super_block *s, struct treepath *p_s_search_path)
{
int n_path_offset = p_s_search_path->path_length;
}
/* Release all buffers in the path. */
-void pathrelse(struct path *p_s_search_path)
+void pathrelse(struct treepath *p_s_search_path)
{
int n_path_offset = p_s_search_path->path_length;
correctness of the bottom of the path */
/* The function is NOT SCHEDULE-SAFE! */
int search_by_key(struct super_block *p_s_sb, const struct cpu_key *p_s_key, /* Key to search. */
- struct path *p_s_search_path, /* This structure was
+ struct treepath *p_s_search_path,/* This structure was
allocated and initialized
by the calling
function. It is filled up
/* The function is NOT SCHEDULE-SAFE! */
int search_for_position_by_key(struct super_block *p_s_sb, /* Pointer to the super block. */
const struct cpu_key *p_cpu_key, /* Key to search (cpu variable) */
- struct path *p_s_search_path /* Filled up by this function. */
+ struct treepath *p_s_search_path /* Filled up by this function. */
)
{
struct item_head *p_le_ih; /* pointer to on-disk structure */
}
/* Compare given item and item pointed to by the path. */
-int comp_items(const struct item_head *stored_ih, const struct path *p_s_path)
+int comp_items(const struct item_head *stored_ih, const struct treepath *p_s_path)
{
struct buffer_head *p_s_bh;
struct item_head *ih;
#define block_in_use(bh) (buffer_locked(bh) || (held_by_others(bh)))
// prepare for delete or cut of direct item
-static inline int prepare_for_direct_item(struct path *path,
+static inline int prepare_for_direct_item(struct treepath *path,
struct item_head *le_ih,
struct inode *inode,
loff_t new_file_length, int *cut_size)
return M_CUT; /* Cut from this item. */
}
-static inline int prepare_for_direntry_item(struct path *path,
+static inline int prepare_for_direntry_item(struct treepath *path,
struct item_head *le_ih,
struct inode *inode,
loff_t new_file_length,
In case of file truncate calculate whether this item must be deleted/truncated or last
unformatted node of this item will be converted to a direct item.
This function returns a determination of what balance mode the calling function should employ. */
-static char prepare_for_delete_or_cut(struct reiserfs_transaction_handle *th, struct inode *inode, struct path *p_s_path, const struct cpu_key *p_s_item_key, int *p_n_removed, /* Number of unformatted nodes which were removed
+static char prepare_for_delete_or_cut(struct reiserfs_transaction_handle *th, struct inode *inode, struct treepath *p_s_path, const struct cpu_key *p_s_item_key, int *p_n_removed, /* Number of unformatted nodes which were removed
from end of the file. */
int *p_n_cut_size, unsigned long long n_new_file_length /* MAX_KEY_OFFSET in case of delete. */
)
static void init_tb_struct(struct reiserfs_transaction_handle *th,
struct tree_balance *p_s_tb,
struct super_block *p_s_sb,
- struct path *p_s_path, int n_size)
+ struct treepath *p_s_path, int n_size)
{
BUG_ON(!th->t_trans_id);
#endif
/* Delete object item. */
-int reiserfs_delete_item(struct reiserfs_transaction_handle *th, struct path *p_s_path, /* Path to the deleted item. */
+int reiserfs_delete_item(struct reiserfs_transaction_handle *th, struct treepath *p_s_path, /* Path to the deleted item. */
const struct cpu_key *p_s_item_key, /* Key to search for the deleted item. */
struct inode *p_s_inode, /* inode is here just to update i_blocks and quotas */
struct buffer_head *p_s_un_bh)
static int maybe_indirect_to_direct(struct reiserfs_transaction_handle *th,
struct inode *p_s_inode,
struct page *page,
- struct path *p_s_path,
+ struct treepath *p_s_path,
const struct cpu_key *p_s_item_key,
loff_t n_new_file_size, char *p_c_mode)
{
pointer being converted. Therefore we have to delete inserted
direct item(s) */
static void indirect_to_direct_roll_back(struct reiserfs_transaction_handle *th,
- struct inode *inode, struct path *path)
+ struct inode *inode, struct treepath *path)
{
struct cpu_key tail_key;
int tail_len;
/* (Truncate or cut entry) or delete object item. Returns < 0 on failure */
int reiserfs_cut_from_item(struct reiserfs_transaction_handle *th,
- struct path *p_s_path,
+ struct treepath *p_s_path,
struct cpu_key *p_s_item_key,
struct inode *p_s_inode,
struct page *page, loff_t n_new_file_size)
#ifdef CONFIG_REISERFS_CHECK
// this makes sure, that we __append__, not overwrite or add holes
-static void check_research_for_paste(struct path *path,
+static void check_research_for_paste(struct treepath *path,
const struct cpu_key *p_s_key)
{
struct item_head *found_ih = get_ih(path);
#endif /* config reiserfs check */
/* Paste bytes to the existing item. Returns bytes number pasted into the item. */
-int reiserfs_paste_into_item(struct reiserfs_transaction_handle *th, struct path *p_s_search_path, /* Path to the pasted item. */
+int reiserfs_paste_into_item(struct reiserfs_transaction_handle *th, struct treepath *p_s_search_path, /* Path to the pasted item. */
const struct cpu_key *p_s_key, /* Key to search for the needed item. */
struct inode *inode, /* Inode item belongs to */
const char *p_c_body, /* Pointer to the bytes to paste. */
}
/* Insert new item into the buffer at the path. */
-int reiserfs_insert_item(struct reiserfs_transaction_handle *th, struct path *p_s_path, /* Path to the inserteded item. */
+int reiserfs_insert_item(struct reiserfs_transaction_handle *th, struct treepath *p_s_path, /* Path to the inserteded item. */
const struct cpu_key *key, struct item_head *p_s_ih, /* Pointer to the item header to insert. */
struct inode *inode, const char *p_c_body)
{ /* Pointer to the bytes to insert. */
#include <linux/blkdev.h>
#include <linux/buffer_head.h>
#include <linux/vfs.h>
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/quotaops.h>
/* path points to first direct item of the file regarless of how many of
them are there */
int direct2indirect(struct reiserfs_transaction_handle *th, struct inode *inode,
- struct path *path, struct buffer_head *unbh,
+ struct treepath *path, struct buffer_head *unbh,
loff_t tail_offset)
{
struct super_block *sb = inode->i_sb;
what we expect from it (number of cut bytes). But when tail remains
in the unformatted node, we set mode to SKIP_BALANCING and unlock
inode */
-int indirect2direct(struct reiserfs_transaction_handle *th, struct inode *p_s_inode, struct page *page, struct path *p_s_path, /* path to the indirect item. */
+int indirect2direct(struct reiserfs_transaction_handle *th, struct inode *p_s_inode, struct page *page, struct treepath *p_s_path, /* path to the indirect item. */
const struct cpu_key *p_s_item_key, /* Key to look for unformatted node pointer to be cut. */
loff_t n_new_file_size, /* New file size. */
char *p_c_mode)
*/
static int __xattr_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct cpu_key pos_key; /* key of current position in the directory (key of directory entry) */
INITIALIZE_PATH(path_to_entry);
struct buffer_head *bh;
static
int xattr_readdir(struct file *file, filldir_t filler, void *buf)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int res = -ENOTDIR;
if (!file->f_op || !file->f_op->readdir)
goto out;
goto out;
}
- xinode = fp->f_dentry->d_inode;
+ xinode = fp->f_path.dentry->d_inode;
REISERFS_I(inode)->i_flags |= i_has_xattr_dir;
/* we need to copy it off.. */
newattrs.ia_size = buffer_size;
newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
mutex_lock(&xinode->i_mutex);
- err = notify_change(fp->f_dentry, &newattrs);
+ err = notify_change(fp->f_path.dentry, &newattrs);
if (err)
goto out_filp;
goto out;
}
- xinode = fp->f_dentry->d_inode;
+ xinode = fp->f_path.dentry->d_inode;
isize = xinode->i_size;
REISERFS_I(inode)->i_flags |= i_has_xattr_dir;
int n;
*size = reiserfs_acl_size(acl->a_count);
- ext_acl = (reiserfs_acl_header *) kmalloc(sizeof(reiserfs_acl_header) +
+ ext_acl = kmalloc(sizeof(reiserfs_acl_header) +
acl->a_count *
sizeof(reiserfs_acl_entry),
GFP_NOFS);
static int
romfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *i = filp->f_dentry->d_inode;
+ struct inode *i = filp->f_path.dentry->d_inode;
struct romfs_inode ri;
unsigned long offset, maxoff;
int j, ino, nextfh;
{
fd_set_bits fds;
void *bits;
- int ret, max_fdset;
+ int ret, max_fds;
unsigned int size;
struct fdtable *fdt;
/* Allocate small arguments on the stack to save memory and be faster */
if (n < 0)
goto out_nofds;
- /* max_fdset can increase, so grab it once to avoid race */
+ /* max_fds can increase, so grab it once to avoid race */
rcu_read_lock();
fdt = files_fdtable(current->files);
- max_fdset = fdt->max_fdset;
+ max_fds = fdt->max_fds;
rcu_read_unlock();
- if (n > max_fdset)
- n = max_fdset;
+ if (n > max_fds)
+ n = max_fds;
/*
* We need 6 bitmaps (in/out/ex for both incoming and outgoing),
/**
* seq_release - free the structures associated with sequential file.
* @file: file in question
- * @inode: file->f_dentry->d_inode
+ * @inode: file->f_path.dentry->d_inode
*
* Frees the structures associated with sequential file; can be used
* as ->f_op->release() if you don't have private data to destroy.
struct smb_cache_control *ctrl, struct qstr *qname,
struct smb_fattr *entry)
{
- struct dentry *newdent, *dentry = filp->f_dentry;
+ struct dentry *newdent, *dentry = filp->f_path.dentry;
struct inode *newino, *inode = dentry->d_inode;
struct smb_cache_control ctl = *ctrl;
int valid = 0;
static int
smb_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct inode *dir = dentry->d_inode;
struct smb_sb_info *server = server_from_dentry(dentry);
union smb_dir_cache *cache = NULL;
static int
smb_dir_open(struct inode *dir, struct file *file)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct smb_sb_info *server;
int error = 0;
VERBOSE("(%s/%s)\n", dentry->d_parent->d_name.name,
- file->f_dentry->d_name.name);
+ file->f_path.dentry->d_name.name);
/*
* Directory timestamps in the core protocol aren't updated
smb_readpage(struct file *file, struct page *page)
{
int error;
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
page_cache_get(page);
error = smb_readpage_sync(dentry, page);
smb_updatepage(struct file *file, struct page *page, unsigned long offset,
unsigned int count)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
DEBUG1("(%s/%s %d@%lld)\n", DENTRY_PATH(dentry), count,
((unsigned long long)page->index << PAGE_CACHE_SHIFT) + offset);
unsigned long nr_segs, loff_t pos)
{
struct file * file = iocb->ki_filp;
- struct dentry * dentry = file->f_dentry;
+ struct dentry * dentry = file->f_path.dentry;
ssize_t status;
VERBOSE("file %s/%s, count=%lu@%lu\n", DENTRY_PATH(dentry),
static int
smb_file_mmap(struct file * file, struct vm_area_struct * vma)
{
- struct dentry * dentry = file->f_dentry;
+ struct dentry * dentry = file->f_path.dentry;
int status;
VERBOSE("file %s/%s, address %lu - %lu\n",
smb_file_sendfile(struct file *file, loff_t *ppos,
size_t count, read_actor_t actor, void *target)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
ssize_t status;
VERBOSE("file %s/%s, pos=%Ld, count=%d\n",
unsigned long nr_segs, loff_t pos)
{
struct file * file = iocb->ki_filp;
- struct dentry * dentry = file->f_dentry;
+ struct dentry * dentry = file->f_path.dentry;
ssize_t result;
VERBOSE("file %s/%s, count=%lu@%lu\n",
smb_file_open(struct inode *inode, struct file * file)
{
int result;
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
int smb_mode = (file->f_mode & O_ACCMODE) - 1;
lock_kernel();
smb_close_socket(server);
if (server->conn_pid)
- kill_proc(server->conn_pid, SIGTERM, 1);
+ kill_pid(server->conn_pid, SIGTERM, 1);
kfree(server->ops);
smb_unload_nls(server);
sb->s_fs_info = NULL;
smb_unlock_server(server);
+ put_pid(server->conn_pid);
kfree(server);
}
INIT_LIST_HEAD(&server->xmitq);
INIT_LIST_HEAD(&server->recvq);
server->conn_error = 0;
- server->conn_pid = 0;
+ server->conn_pid = NULL;
server->state = CONN_INVALID; /* no connection yet */
server->generation = 0;
filp = fget(opt->fd);
if (!filp)
goto out;
- if (!smb_valid_socket(filp->f_dentry->d_inode))
+ if (!smb_valid_socket(filp->f_path.dentry->d_inode))
goto out_putf;
server->sock_file = filp;
- server->conn_pid = current->pid;
+ server->conn_pid = get_pid(task_pid(current));
server->opt = *opt;
server->generation += 1;
server->state = CONN_VALID;
/*
* Store the server in sock user_data (Only used by sunrpc)
*/
- sk = SOCKET_I(filp->f_dentry->d_inode)->sk;
+ sk = SOCKET_I(filp->f_path.dentry->d_inode)->sk;
sk->sk_user_data = server;
/* chain into the data_ready callback */
}
VERBOSE("protocol=%d, max_xmit=%d, pid=%d capabilities=0x%x\n",
- server->opt.protocol, server->opt.max_xmit, server->conn_pid,
- server->opt.capabilities);
+ server->opt.protocol, server->opt.max_xmit,
+ pid_nr(server->conn_pid), server->opt.capabilities);
/* FIXME: this really should be done by smbmount. */
if (server->opt.max_xmit > SMB_MAX_PACKET_SIZE) {
smb_proc_readdir_short(struct file *filp, void *dirent, filldir_t filldir,
struct smb_cache_control *ctl)
{
- struct dentry *dir = filp->f_dentry;
+ struct dentry *dir = filp->f_path.dentry;
struct smb_sb_info *server = server_from_dentry(dir);
struct qstr qname;
struct smb_fattr fattr;
smb_proc_readdir_long(struct file *filp, void *dirent, filldir_t filldir,
struct smb_cache_control *ctl)
{
- struct dentry *dir = filp->f_dentry;
+ struct dentry *dir = filp->f_path.dentry;
struct smb_sb_info *server = server_from_dentry(dir);
struct qstr qname;
struct smb_fattr fattr;
smb_proc_readdir_null(struct file *filp, void *dirent, filldir_t filldir,
struct smb_cache_control *ctl)
{
- struct smb_sb_info *server = server_from_dentry(filp->f_dentry);
+ struct smb_sb_info *server = server_from_dentry(filp->f_path.dentry);
if (smb_proc_ops_wait(server) < 0)
return -EIO;
{
struct list_head *head;
struct smb_request *req;
- pid_t pid = server->conn_pid;
+ struct pid *pid = get_pid(server->conn_pid);
int result = 0;
VERBOSE("state: %d\n", server->state);
/*
* Note: use the "priv" flag, as a user process may need to reconnect.
*/
- result = kill_proc(pid, SIGUSR1, 1);
+ result = kill_pid(pid, SIGUSR1, 1);
if (result) {
/* FIXME: this is most likely fatal, umount? */
printk(KERN_ERR "smb_retry: signal failed [%d]\n", result);
/* FIXME: The retried requests should perhaps get a "time boost". */
out:
+ put_pid(pid);
return result;
}
if (server && (file = server->sock_file))
{
#ifdef SMBFS_PARANOIA
- if (!smb_valid_socket(file->f_dentry->d_inode))
+ if (!smb_valid_socket(file->f_path.dentry->d_inode))
PARANOIA("bad socket!\n");
#endif
- return SOCKET_I(file->f_dentry->d_inode);
+ return SOCKET_I(file->f_path.dentry->d_inode);
}
return NULL;
}
struct partial_page *partial; /* pages[] may not be contig */
int nr_pages; /* number of pages in map */
unsigned int flags; /* splice flags */
- struct pipe_buf_operations *ops;/* ops associated with output pipe */
+ const struct pipe_buf_operations *ops;/* ops associated with output pipe */
};
/*
return err;
}
-static struct pipe_buf_operations page_cache_pipe_buf_ops = {
+static const struct pipe_buf_operations page_cache_pipe_buf_ops = {
.can_merge = 0,
.map = generic_pipe_buf_map,
.unmap = generic_pipe_buf_unmap,
return generic_pipe_buf_steal(pipe, buf);
}
-static struct pipe_buf_operations user_page_pipe_buf_ops = {
+static const struct pipe_buf_operations user_page_pipe_buf_ops = {
.can_merge = 0,
.map = generic_pipe_buf_map,
.unmap = generic_pipe_buf_unmap,
for (;;) {
if (pipe->nrbufs) {
struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
- struct pipe_buf_operations *ops = buf->ops;
+ const struct pipe_buf_operations *ops = buf->ops;
sd.len = buf->len;
if (sd.len > sd.total_len)
ssize_t ret;
int err;
- err = remove_suid(out->f_dentry);
+ err = remove_suid(out->f_path.dentry);
if (unlikely(err))
return err;
ssize_t ret;
int err;
- err = should_remove_suid(out->f_dentry);
+ err = should_remove_suid(out->f_path.dentry);
if (unlikely(err)) {
mutex_lock(&inode->i_mutex);
- err = __remove_suid(out->f_dentry, err);
+ err = __remove_suid(out->f_path.dentry, err);
mutex_unlock(&inode->i_mutex);
if (err)
return err;
* randomly drop data for eg socket -> socket splicing. Use the
* piped splicing for that!
*/
- i_mode = in->f_dentry->d_inode->i_mode;
+ i_mode = in->f_path.dentry->d_inode->i_mode;
if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode)))
return -EINVAL;
loff_t offset, *off;
long ret;
- pipe = pipe_info(in->f_dentry->d_inode);
+ pipe = pipe_info(in->f_path.dentry->d_inode);
if (pipe) {
if (off_in)
return -ESPIPE;
return ret;
}
- pipe = pipe_info(out->f_dentry->d_inode);
+ pipe = pipe_info(out->f_path.dentry->d_inode);
if (pipe) {
if (off_out)
return -ESPIPE;
.ops = &user_page_pipe_buf_ops,
};
- pipe = pipe_info(file->f_dentry->d_inode);
+ pipe = pipe_info(file->f_path.dentry->d_inode);
if (!pipe)
return -EBADF;
if (unlikely(nr_segs > UIO_MAXIOV))
static long do_tee(struct file *in, struct file *out, size_t len,
unsigned int flags)
{
- struct pipe_inode_info *ipipe = pipe_info(in->f_dentry->d_inode);
- struct pipe_inode_info *opipe = pipe_info(out->f_dentry->d_inode);
+ struct pipe_inode_info *ipipe = pipe_info(in->f_path.dentry->d_inode);
+ struct pipe_inode_info *opipe = pipe_info(out->f_path.dentry->d_inode);
int ret = -EINVAL;
/*
--- /dev/null
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/fs_stack.h>
+
+/* does _NOT_ require i_mutex to be held.
+ *
+ * This function cannot be inlined since i_size_{read,write} is rather
+ * heavy-weight on 32-bit systems
+ */
+void fsstack_copy_inode_size(struct inode *dst, const struct inode *src)
+{
+ i_size_write(dst, i_size_read((struct inode *)src));
+ dst->i_blocks = src->i_blocks;
+}
+EXPORT_SYMBOL_GPL(fsstack_copy_inode_size);
+
+/* copy all attributes; get_nlinks is optional way to override the i_nlink
+ * copying
+ */
+void fsstack_copy_attr_all(struct inode *dest, const struct inode *src,
+ int (*get_nlinks)(struct inode *))
+{
+ if (!get_nlinks)
+ dest->i_nlink = src->i_nlink;
+ else
+ dest->i_nlink = (*get_nlinks)(dest);
+
+ dest->i_mode = src->i_mode;
+ dest->i_uid = src->i_uid;
+ dest->i_gid = src->i_gid;
+ dest->i_rdev = src->i_rdev;
+ dest->i_atime = src->i_atime;
+ dest->i_mtime = src->i_mtime;
+ dest->i_ctime = src->i_ctime;
+ dest->i_blkbits = src->i_blkbits;
+ dest->i_flags = src->i_flags;
+
+ fsstack_copy_inode_size(dest, src);
+}
+EXPORT_SYMBOL_GPL(fsstack_copy_attr_all);
int error = -EBADF;
if (f) {
- error = vfs_getattr(f->f_vfsmnt, f->f_dentry, stat);
+ error = vfs_getattr(f->f_path.mnt, f->f_path.dentry, stat);
fput(f);
}
return error;
file_list_lock();
list_for_each_entry(f, &sb->s_files, f_u.fu_list) {
- if (S_ISREG(f->f_dentry->d_inode->i_mode) && file_count(f))
+ if (S_ISREG(f->f_path.dentry->d_inode->i_mode) && file_count(f))
f->f_mode &= ~FMODE_WRITE;
}
file_list_unlock();
* livelocks in fsync_buffers_list().
*/
mutex_lock(&mapping->host->i_mutex);
- err = file->f_op->fsync(file, file->f_dentry, datasync);
+ err = file->f_op->fsync(file, file->f_path.dentry, datasync);
if (!ret)
ret = err;
mutex_unlock(&mapping->host->i_mutex);
if (!file)
goto out;
- i_mode = file->f_dentry->d_inode->i_mode;
+ i_mode = file->f_path.dentry->d_inode->i_mode;
ret = -ESPIPE;
if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
!S_ISLNK(i_mode))
read(struct file * file, char __user * userbuf, size_t count, loff_t * off)
{
char *buffer = file->private_data;
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
int size = dentry->d_inode->i_size;
loff_t offs = *off;
int ret;
size_t count, loff_t * off)
{
char *buffer = file->private_data;
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
int size = dentry->d_inode->i_size;
loff_t offs = *off;
static int mmap(struct file *file, struct vm_area_struct *vma)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct bin_attribute *attr = to_bin_attr(dentry);
struct kobject *kobj = to_kobj(dentry->d_parent);
static int open(struct inode * inode, struct file * file)
{
- struct kobject *kobj = sysfs_get_kobject(file->f_dentry->d_parent);
- struct bin_attribute * attr = to_bin_attr(file->f_dentry);
+ struct kobject *kobj = sysfs_get_kobject(file->f_path.dentry->d_parent);
+ struct bin_attribute * attr = to_bin_attr(file->f_path.dentry);
int error = -EINVAL;
if (!kobj || !attr)
static int release(struct inode * inode, struct file * file)
{
- struct kobject * kobj = to_kobj(file->f_dentry->d_parent);
- struct bin_attribute * attr = to_bin_attr(file->f_dentry);
+ struct kobject * kobj = to_kobj(file->f_path.dentry->d_parent);
+ struct bin_attribute * attr = to_bin_attr(file->f_path.dentry);
u8 * buffer = file->private_data;
if (kobj)
static int sysfs_dir_open(struct inode *inode, struct file *file)
{
- struct dentry * dentry = file->f_dentry;
+ struct dentry * dentry = file->f_path.dentry;
struct sysfs_dirent * parent_sd = dentry->d_fsdata;
mutex_lock(&dentry->d_inode->i_mutex);
static int sysfs_dir_close(struct inode *inode, struct file *file)
{
- struct dentry * dentry = file->f_dentry;
+ struct dentry * dentry = file->f_path.dentry;
struct sysfs_dirent * cursor = file->private_data;
mutex_lock(&dentry->d_inode->i_mutex);
static int sysfs_readdir(struct file * filp, void * dirent, filldir_t filldir)
{
- struct dentry *dentry = filp->f_dentry;
+ struct dentry *dentry = filp->f_path.dentry;
struct sysfs_dirent * parent_sd = dentry->d_fsdata;
struct sysfs_dirent *cursor = filp->private_data;
struct list_head *p, *q = &cursor->s_sibling;
static loff_t sysfs_dir_lseek(struct file * file, loff_t offset, int origin)
{
- struct dentry * dentry = file->f_dentry;
+ struct dentry * dentry = file->f_path.dentry;
mutex_lock(&dentry->d_inode->i_mutex);
switch (origin) {
if (offset >= 0)
break;
default:
- mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
return -EINVAL;
}
if (offset != file->f_pos) {
down(&buffer->sem);
if (buffer->needs_read_fill) {
- if ((retval = fill_read_buffer(file->f_dentry,buffer)))
+ if ((retval = fill_read_buffer(file->f_path.dentry,buffer)))
goto out;
}
pr_debug("%s: count = %zd, ppos = %lld, buf = %s\n",
down(&buffer->sem);
len = fill_write_buffer(buffer, buf, count);
if (len > 0)
- len = flush_write_buffer(file->f_dentry, buffer, len);
+ len = flush_write_buffer(file->f_path.dentry, buffer, len);
if (len > 0)
*ppos += len;
up(&buffer->sem);
static int check_perm(struct inode * inode, struct file * file)
{
- struct kobject *kobj = sysfs_get_kobject(file->f_dentry->d_parent);
- struct attribute * attr = to_attr(file->f_dentry);
+ struct kobject *kobj = sysfs_get_kobject(file->f_path.dentry->d_parent);
+ struct attribute * attr = to_attr(file->f_path.dentry);
struct sysfs_buffer * buffer;
struct sysfs_ops * ops = NULL;
int error = 0;
static int sysfs_release(struct inode * inode, struct file * filp)
{
- struct kobject * kobj = to_kobj(filp->f_dentry->d_parent);
- struct attribute * attr = to_attr(filp->f_dentry);
+ struct kobject * kobj = to_kobj(filp->f_path.dentry->d_parent);
+ struct attribute * attr = to_attr(filp->f_path.dentry);
struct module * owner = attr->owner;
struct sysfs_buffer * buffer = filp->private_data;
static unsigned int sysfs_poll(struct file *filp, poll_table *wait)
{
struct sysfs_buffer * buffer = filp->private_data;
- struct kobject * kobj = to_kobj(filp->f_dentry->d_parent);
- struct sysfs_dirent * sd = filp->f_dentry->d_fsdata;
+ struct kobject * kobj = to_kobj(filp->f_path.dentry->d_parent);
+ struct sysfs_dirent * sd = filp->f_path.dentry->d_fsdata;
int res = 0;
poll_wait(filp, &kobj->poll, wait);
static int sysv_readdir(struct file * filp, void * dirent, filldir_t filldir)
{
unsigned long pos = filp->f_pos;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
unsigned offset = pos & ~PAGE_CACHE_MASK;
unsigned long n = pos >> PAGE_CACHE_SHIFT;
int udf_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
- struct inode *dir = filp->f_dentry->d_inode;
+ struct inode *dir = filp->f_path.dentry->d_inode;
int result;
lock_kernel();
if ( cfi.fileCharacteristics & FID_FILE_CHAR_PARENT )
{
- iblock = parent_ino(filp->f_dentry);
+ iblock = parent_ino(filp->f_path.dentry);
flen = 2;
memcpy(fname, "..", flen);
dt_type = DT_DIR;
{
ssize_t retval;
struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int err, pos;
size_t count = iocb->ki_left;
ufs_readdir(struct file *filp, void *dirent, filldir_t filldir)
{
loff_t pos = filp->f_pos;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
unsigned int offset = pos & ~PAGE_CACHE_MASK;
unsigned long n = pos >> PAGE_CACHE_SHIFT;
f = fget(fd);
if (!f)
return error;
- dentry = f->f_dentry;
+ dentry = f->f_path.dentry;
audit_inode(NULL, dentry->d_inode);
error = setxattr(dentry, name, value, size, flags);
fput(f);
f = fget(fd);
if (!f)
return error;
- error = getxattr(f->f_dentry, name, value, size);
+ error = getxattr(f->f_path.dentry, name, value, size);
fput(f);
return error;
}
f = fget(fd);
if (!f)
return error;
- error = listxattr(f->f_dentry, list, size);
+ error = listxattr(f->f_path.dentry, list, size);
fput(f);
return error;
}
f = fget(fd);
if (!f)
return error;
- dentry = f->f_dentry;
+ dentry = f->f_path.dentry;
audit_inode(NULL, dentry->d_inode);
error = removexattr(dentry, name);
fput(f);
xfs_end_io_direct);
}
- if (unlikely(ret <= 0 && iocb->private))
+ if (unlikely(ret != -EIOCBQUEUED && iocb->private))
xfs_destroy_ioend(iocb->private);
return ret;
}
loff_t pos)
{
struct file *file = iocb->ki_filp;
- bhv_vnode_t *vp = vn_from_inode(file->f_dentry->d_inode);
+ bhv_vnode_t *vp = vn_from_inode(file->f_path.dentry->d_inode);
BUG_ON(iocb->ki_pos != pos);
if (unlikely(file->f_flags & O_DIRECT))
read_actor_t actor,
void *target)
{
- return bhv_vop_sendfile(vn_from_inode(filp->f_dentry->d_inode),
+ return bhv_vop_sendfile(vn_from_inode(filp->f_path.dentry->d_inode),
filp, pos, 0, count, actor, target, NULL);
}
read_actor_t actor,
void *target)
{
- return bhv_vop_sendfile(vn_from_inode(filp->f_dentry->d_inode),
+ return bhv_vop_sendfile(vn_from_inode(filp->f_path.dentry->d_inode),
filp, pos, IO_INVIS, count, actor, target, NULL);
}
size_t len,
unsigned int flags)
{
- return bhv_vop_splice_read(vn_from_inode(infilp->f_dentry->d_inode),
+ return bhv_vop_splice_read(vn_from_inode(infilp->f_path.dentry->d_inode),
infilp, ppos, pipe, len, flags, 0, NULL);
}
size_t len,
unsigned int flags)
{
- return bhv_vop_splice_read(vn_from_inode(infilp->f_dentry->d_inode),
+ return bhv_vop_splice_read(vn_from_inode(infilp->f_path.dentry->d_inode),
infilp, ppos, pipe, len, flags, IO_INVIS,
NULL);
}
size_t len,
unsigned int flags)
{
- return bhv_vop_splice_write(vn_from_inode(outfilp->f_dentry->d_inode),
+ return bhv_vop_splice_write(vn_from_inode(outfilp->f_path.dentry->d_inode),
pipe, outfilp, ppos, len, flags, 0, NULL);
}
size_t len,
unsigned int flags)
{
- return bhv_vop_splice_write(vn_from_inode(outfilp->f_dentry->d_inode),
+ return bhv_vop_splice_write(vn_from_inode(outfilp->f_path.dentry->d_inode),
pipe, outfilp, ppos, len, flags, IO_INVIS,
NULL);
}
struct file *filp,
fl_owner_t id)
{
- return -bhv_vop_close(vn_from_inode(filp->f_dentry->d_inode), 0,
+ return -bhv_vop_close(vn_from_inode(filp->f_path.dentry->d_inode), 0,
file_count(filp) > 1 ? L_FALSE : L_TRUE, NULL);
}
unsigned long address,
int *type)
{
- struct inode *inode = area->vm_file->f_dentry->d_inode;
+ struct inode *inode = area->vm_file->f_path.dentry->d_inode;
bhv_vnode_t *vp = vn_from_inode(inode);
ASSERT_ALWAYS(vp->v_vfsp->vfs_flag & VFS_DMI);
filldir_t filldir)
{
int error = 0;
- bhv_vnode_t *vp = vn_from_inode(filp->f_dentry->d_inode);
+ bhv_vnode_t *vp = vn_from_inode(filp->f_path.dentry->d_inode);
uio_t uio;
iovec_t iov;
int eof = 0;
vma->vm_ops = &xfs_file_vm_ops;
#ifdef CONFIG_XFS_DMAPI
- if (vn_from_inode(filp->f_dentry->d_inode)->v_vfsp->vfs_flag & VFS_DMI)
+ if (vn_from_inode(filp->f_path.dentry->d_inode)->v_vfsp->vfs_flag & VFS_DMI)
vma->vm_ops = &xfs_dmapi_file_vm_ops;
#endif /* CONFIG_XFS_DMAPI */
unsigned long p)
{
int error;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
bhv_vnode_t *vp = vn_from_inode(inode);
error = bhv_vop_ioctl(vp, inode, filp, 0, cmd, (void __user *)p);
unsigned long p)
{
int error;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
bhv_vnode_t *vp = vn_from_inode(inode);
error = bhv_vop_ioctl(vp, inode, filp, IO_INVIS, cmd, (void __user *)p);
struct vm_area_struct *vma,
unsigned int newflags)
{
- bhv_vnode_t *vp = vn_from_inode(vma->vm_file->f_dentry->d_inode);
+ bhv_vnode_t *vp = vn_from_inode(vma->vm_file->f_path.dentry->d_inode);
int error = 0;
if (vp->v_vfsp->vfs_flag & VFS_DMI) {
if (!file)
return -EBADF;
- ASSERT(file->f_dentry);
- ASSERT(file->f_dentry->d_inode);
- inode = igrab(file->f_dentry->d_inode);
+ ASSERT(file->f_path.dentry);
+ ASSERT(file->f_path.dentry->d_inode);
+ inode = igrab(file->f_path.dentry->d_inode);
fput(file);
break;
}
}
/* Ensure umount returns EBUSY on umounts while this file is open. */
- mntget(parfilp->f_vfsmnt);
+ mntget(parfilp->f_path.mnt);
/* Create file pointer. */
- filp = dentry_open(dentry, parfilp->f_vfsmnt, hreq.oflags);
+ filp = dentry_open(dentry, parfilp->f_path.mnt, hreq.oflags);
if (IS_ERR(filp)) {
put_unused_fd(new_fd);
return -XFS_ERROR(-PTR_ERR(filp));
unsigned cmd,
unsigned long arg)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
bhv_vnode_t *vp = vn_from_inode(inode);
int error;
!capable(CAP_FSETID)) {
error = xfs_write_clear_setuid(xip);
if (likely(!error))
- error = -remove_suid(file->f_dentry);
+ error = -remove_suid(file->f_path.dentry);
if (unlikely(error)) {
xfs_iunlock(xip, iolock);
goto out_unlock_mutex;
/* Pull information for the target fd */
if (((fp = fget((int)sxp->sx_fdtarget)) == NULL) ||
- ((vp = vn_from_inode(fp->f_dentry->d_inode)) == NULL)) {
+ ((vp = vn_from_inode(fp->f_path.dentry->d_inode)) == NULL)) {
error = XFS_ERROR(EINVAL);
goto error0;
}
}
if (((tfp = fget((int)sxp->sx_fdtmp)) == NULL) ||
- ((tvp = vn_from_inode(tfp->f_dentry->d_inode)) == NULL)) {
+ ((tvp = vn_from_inode(tfp->f_path.dentry->d_inode)) == NULL)) {
error = XFS_ERROR(EINVAL);
goto error0;
}
/* Caches aren't brain-dead on the Alpha. */
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
speed_t c_ospeed; /* output speed */
};
+/* Alpha has matching termios and ktermios */
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_cc[NCCS]; /* control characters */
+ cc_t c_line; /* line discipline (== c_cc[19]) */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VEOF 0
#define VEOL 1
/* PLL registers */
#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
-#define CSCR_SYSTEM_SEL (1<<16)
+#define CSCR_SPLL_RESTART (1<<22)
+#define CSCR_MPLL_RESTART (1<<21)
+#define CSCR_SYSTEM_SEL (1<<16)
+#define CSCR_BCLK_DIV (0xf<<10)
+#define CSCR_MPU_PRESC (1<<15)
+#define CSCR_SPEN (1<<1)
+#define CSCR_MPEN (1<<0)
#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-#define CSCR_MPLL_RESTART (1<<21)
-
/*
* GPIO Module and I/O Multiplexer
* x = 0..3 for reg_A, reg_B, reg_C, reg_D
--- /dev/null
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H__
+#define __ASM_ARCH_I2C_H__
+
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+
+enum {
+ mstatus_tdi = 0x00000001,
+ mstatus_afi = 0x00000002,
+ mstatus_nai = 0x00000004,
+ mstatus_drmi = 0x00000008,
+ mstatus_active = 0x00000020,
+ mstatus_scl = 0x00000040,
+ mstatus_sda = 0x00000080,
+ mstatus_rff = 0x00000100,
+ mstatus_rfe = 0x00000200,
+ mstatus_tff = 0x00000400,
+ mstatus_tfe = 0x00000800,
+};
+
+enum {
+ mcntrl_tdie = 0x00000001,
+ mcntrl_afie = 0x00000002,
+ mcntrl_naie = 0x00000004,
+ mcntrl_drmie = 0x00000008,
+ mcntrl_daie = 0x00000020,
+ mcntrl_rffie = 0x00000040,
+ mcntrl_tffie = 0x00000080,
+ mcntrl_reset = 0x00000100,
+ mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+ rw_bit = 1 << 0,
+ start_bit = 1 << 8,
+ stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
+#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
+#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
+#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
+#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
+#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
+
+#define HCLK_MHZ 13
+#define I2C_CHIP_NAME "PNX4008-I2C"
+
+#endif /* __ASM_ARCH_I2C_H___ */
#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00)
#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP_TIMEOUT_SCALE (2712)
#elif defined(CONFIG_PXA27x)
#define CLOCK_SPEED_HZ 13000000
#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
-#define SSP_TIMEOUT_SCALE (769)
#endif
-#define SSP_TIMEOUT(x) ((x*10000)/SSP_TIMEOUT_SCALE)
#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1)))))
#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2)))))
#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3)))))
u8 tx_threshold;
u8 rx_threshold;
u8 dma_burst_size;
- u32 timeout_microsecs;
+ u32 timeout;
u8 enable_loopback;
void (*cs_control)(u32 command);
};
struct s3c2410fb_mach_info {
unsigned char fixed_syncs; /* do not update sync/border */
+ /* LCD types */
+ int type;
+
/* Screen size */
int width;
int height;
#ifndef __ASM_ARCH_REGS_UDC_H
#define __ASM_ARCH_REGS_UDC_H
-
-#define S3C2410_USBDREG(x) ((x) + S3C24XX_VA_USBDEV)
+#define S3C2410_USBDREG(x) (x)
#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140)
#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144)
#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W
#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W
-#define S3C2410_UDC_SETIX(x) \
- __raw_writel(S3C2410_UDC_INDEX_ ## x, S3C2410_UDC_INDEX_REG);
+#define S3C2410_UDC_SETIX(base,x) \
+ writel(S3C2410_UDC_INDEX_ ## x, base+S3C2410_UDC_INDEX_REG);
#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0)
unsigned long len, int write);
#endif
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
/*
* flush_cache_user_range is used when we want to ensure that the
* Harvard caches are synchronised for the user space address range.
*/
void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
/*
- * Set a PTE
+ * Set a possibly extended PTE. Non-extended PTEs should
+ * ignore 'ext'.
*/
- void (*set_pte)(pte_t *ptep, pte_t pte);
+ void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
} processor;
#define cpu_proc_init() processor._proc_init()
#define cpu_reset(addr) processor.reset(addr)
#define cpu_do_idle() processor._do_idle()
#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz)
-#define cpu_set_pte(ptep, pte) processor.set_pte(ptep, pte)
+#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext)
#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm)
#define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle)
#define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area)
#define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm)
-#define cpu_set_pte __cpu_fn(CPU_NAME,_set_pte)
+#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext)
#include <asm/page.h>
extern int cpu_do_idle(void);
extern void cpu_dcache_clean_area(void *, int);
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
-extern void cpu_set_pte(pte_t *ptep, pte_t pte);
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
#include <asm/memory.h>
#include <asm/arch/vmalloc.h>
+#include <asm/pgtable-hwdef.h>
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
#define L_PTE_EXEC (1 << 6)
#define L_PTE_DIRTY (1 << 7)
#define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */
-#define L_PTE_ASID (1 << 11) /* non-global (use ASID, v6) */
#ifndef __ASSEMBLY__
#define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
#define pte_none(pte) (!pte_val(pte))
-#define pte_clear(mm,addr,ptep) set_pte_at((mm),(addr),(ptep), __pte(0))
+#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
#define pte_page(pte) (pfn_to_page(pte_pfn(pte)))
#define pte_offset_kernel(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
#define pte_offset_map(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
#define pte_unmap(pte) do { } while (0)
#define pte_unmap_nested(pte) do { } while (0)
-#define set_pte(ptep, pte) cpu_set_pte(ptep,pte)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+
+#define set_pte_at(mm,addr,ptep,pteval) do { \
+ set_pte_ext(ptep, pteval, (addr) >= PAGE_OFFSET ? 0 : PTE_EXT_NG); \
+ } while (0)
/*
* The following only work if pte_present() is true.
#if __LINUX_ARM_ARCH__ >= 5
#define ARCH_HAS_PREFETCH
-#define prefetch(ptr) \
- ({ \
- __asm__ __volatile__( \
- "pld\t%0" \
- : \
- : "o" (*(char *)(ptr)) \
- : "cc"); \
- })
+static inline void prefetch(const void *ptr)
+{
+ __asm__ __volatile__(
+ "pld\t%0"
+ :
+ : "o" (*(char *)ptr)
+ : "cc");
+}
#define ARCH_HAS_PREFETCHW
#define prefetchw(ptr) prefetch(ptr)
#define cpu_is_xscale() 1
#endif
-#define set_cr(x) \
- __asm__ __volatile__( \
- "mcr p15, 0, %0, c1, c0, 0 @ set CR" \
- : : "r" (x) : "cc")
-
-#define get_cr() \
- ({ \
- unsigned int __val; \
- __asm__ __volatile__( \
- "mrc p15, 0, %0, c1, c0, 0 @ get CR" \
- : "=r" (__val) : : "cc"); \
- __val; \
- })
+static inline unsigned int get_cr(void)
+{
+ unsigned int val;
+ asm("mrc p15, 0, %0, c1, c0, 0 @ get CR" : "=r" (val) : : "cc");
+ return val;
+}
+
+static inline void set_cr(unsigned int val)
+{
+ asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR"
+ : : "r" (val) : "cc");
+}
+
+#define CPACC_FULL(n) (3 << (n * 2))
+#define CPACC_SVC(n) (1 << (n * 2))
+#define CPACC_DISABLE(n) (0 << (n * 2))
+
+static inline unsigned int get_copro_access(void)
+{
+ unsigned int val;
+ asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access"
+ : "=r" (val) : : "cc");
+ return val;
+}
+
+static inline void set_copro_access(unsigned int val)
+{
+ asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
+ : : "r" (val) : "cc");
+}
extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
extern unsigned long cr_alignment; /* defined in entry-armv.S */
+#ifndef CONFIG_SMP
+static inline void adjust_cr(unsigned long mask, unsigned long set)
+{
+ unsigned long flags, cr;
+
+ mask &= ~CR_A;
+
+ set &= mask;
+
+ local_irq_save(flags);
+
+ cr_no_alignment = (cr_no_alignment & ~mask) | set;
+ cr_alignment = (cr_alignment & ~mask) | set;
+
+ set_cr((get_cr() & ~mask) | set);
+
+ local_irq_restore(flags);
+}
+#endif
+
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
#define UDBG_BADABORT (1 << 2)
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18
+#define TIF_FREEZE 19
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
+#define _TIF_FREEZE (1 << TIF_FREEZE)
/*
* Change these and you break ASM code in entry-common.S
#define __NR_mbind (__NR_SYSCALL_BASE+319)
#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320)
#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321)
+#define __NR_openat (__NR_SYSCALL_BASE+322)
+#define __NR_mkdirat (__NR_SYSCALL_BASE+323)
+#define __NR_mknodat (__NR_SYSCALL_BASE+324)
+#define __NR_fchownat (__NR_SYSCALL_BASE+325)
+#define __NR_futimesat (__NR_SYSCALL_BASE+326)
+#define __NR_fstatat64 (__NR_SYSCALL_BASE+327)
+#define __NR_unlinkat (__NR_SYSCALL_BASE+328)
+#define __NR_renameat (__NR_SYSCALL_BASE+329)
+#define __NR_linkat (__NR_SYSCALL_BASE+330)
+#define __NR_symlinkat (__NR_SYSCALL_BASE+331)
+#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
+#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
+#define __NR_faccessat (__NR_SYSCALL_BASE+334)
/*
* The following SWIs are ARM private.
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma,start,end) do { } while (0)
#define flush_cache_page(vma,vmaddr,pfn) do { } while (0)
#define flush_cache_vmap(start, end) do { } while (0)
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
--- /dev/null
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP7000_H__
+#define __ASM_ARCH_AT32AP7000_H__
+
+#define GPIO_PERIPH_A 0
+#define GPIO_PERIPH_B 1
+
+#define NR_GPIO_CONTROLLERS 4
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE (0)
+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
+
+#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
+
+#endif /* __ASM_ARCH_AT32AP7000_H__ */
struct platform_device *at32_add_device_usart(unsigned int id);
struct eth_platform_data {
- u8 valid;
- u8 mii_phy_addr;
u8 is_rmii;
- u8 hw_addr[6];
};
struct platform_device *
at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_AVR32_AT32_PORTMUX_H__
-#define __ASM_AVR32_AT32_PORTMUX_H__
+#ifndef __ASM_ARCH_PORTMUX_H__
+#define __ASM_ARCH_PORTMUX_H__
-void portmux_set_func(unsigned int portmux_id, unsigned int pin_id,
- unsigned int function_id);
+/*
+ * Set up pin multiplexing, called from board init only.
+ *
+ * The following flags determine the initial state of the pin.
+ */
+#define AT32_GPIOF_PULLUP 0x00000001 /* Enable pull-up */
+#define AT32_GPIOF_OUTPUT 0x00000002 /* Enable output driver */
+#define AT32_GPIOF_HIGH 0x00000004 /* Set output high */
+
+void at32_select_periph(unsigned int pin, unsigned int periph,
+ unsigned long flags);
+void at32_select_gpio(unsigned int pin, unsigned long flags);
-#endif /* __ASM_AVR32_AT32_PORTMUX_H__ */
+#endif /* __ASM_ARCH_PORTMUX_H__ */
*/
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_cache_vmap(start, end) do { } while (0)
dma_map_single(struct device *dev, void *cpu_addr, size_t size,
enum dma_data_direction direction)
{
- dma_cache_sync(cpu_addr, size, direction);
+ dma_cache_sync(dev, cpu_addr, size, direction);
return virt_to_bus(cpu_addr);
}
sg[i].dma_address = page_to_bus(sg[i].page) + sg[i].offset;
virt = page_address(sg[i].page) + sg[i].offset;
- dma_cache_sync(virt, sg[i].length, direction);
+ dma_cache_sync(dev, virt, sg[i].length, direction);
}
return nents;
dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
- dma_cache_sync(bus_to_virt(dma_handle), size, direction);
+ dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
}
static inline void
dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
- dma_cache_sync(bus_to_virt(dma_handle), size, direction);
+ dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
}
/**
int i;
for (i = 0; i < nents; i++) {
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, direction);
}
}
int i;
for (i = 0; i < nents; i++) {
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, direction);
}
}
static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
{
unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t));
- pgd_t *pgd = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL);
+ pgd_t *pgd = kmalloc(pgd_size, GFP_KERNEL);
if (pgd)
memset(pgd, 0, pgd_size);
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
*/
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
return 31 - bit;
}
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+#define ARCH_HAS_ILOG2_U32
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+ int bit;
+ asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n));
+ return 31 - bit;
+}
+
+/*
+ * special slimline version of fls64() for calculating ilog2_u64()
+ * - note: no protection against n == 0
+ */
+#define ARCH_HAS_ILOG2_U64
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+ union {
+ u64 ll;
+ struct { u32 h, l; };
+ } _;
+ int bit, x, y;
+
+ _.ll = n;
+
+ asm(" subcc %3,gr0,gr0,icc0 \n"
+ " ckeq icc0,cc4 \n"
+ " cscan.p %3,gr0,%0 ,cc4,0 \n"
+ " setlos #63,%1 \n"
+ " cscan.p %4,gr0,%0 ,cc4,1 \n"
+ " setlos #31,%2 \n"
+ " csub.p %1,%0,%0 ,cc4,0 \n"
+ " csub %2,%0,%0 ,cc4,1 \n"
+ : "=&r"(bit), "=r"(x), "=r"(y)
+ : "0r"(_.h), "r"(_.l)
+ : "icc0", "cc4"
+ );
+ return bit;
+}
+
#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/hweight.h>
*/
#define flush_cache_all() do {} while(0)
#define flush_cache_mm(mm) do {} while(0)
+#define flush_cache_dup_mm(mm) do {} while(0)
#define flush_cache_range(mm, start, end) do {} while(0)
#define flush_cache_page(vma, vmaddr, pfn) do {} while(0)
#define flush_cache_vmap(start, end) do {} while(0)
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */
#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 17 /* OOM killer killed process */
+#define TIF_FREEZE 18 /* freezing for suspend */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_IRET (1 << TIF_IRET)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
#include <linux/compiler.h>
#ifdef CONFIG_BUG
+
+#ifdef CONFIG_GENERIC_BUG
+#ifndef __ASSEMBLY__
+struct bug_entry {
+ unsigned long bug_addr;
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+ const char *file;
+ unsigned short line;
+#endif
+ unsigned short flags;
+};
+#endif /* __ASSEMBLY__ */
+
+#define BUGFLAG_WARNING (1<<0)
+#endif /* CONFIG_GENERIC_BUG */
+
#ifndef HAVE_ARCH_BUG
#define BUG() do { \
printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
#define WARN_ON(condition) ({ \
typeof(condition) __ret_warn_on = (condition); \
if (unlikely(__ret_warn_on)) { \
- printk("BUG: warning at %s:%d/%s()\n", __FILE__, \
+ printk("WARNING at %s:%d %s()\n", __FILE__, \
__LINE__, __FUNCTION__); \
dump_stack(); \
} \
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
+#include <linux/log2.h>
-/* Pure 2^n version of get_order */
-static __inline__ __attribute_const__ int get_order(unsigned long size)
+/*
+ * non-const pure 2^n version of get_order
+ * - the arch may override these in asm/bitops.h if they can be implemented
+ * more efficiently than using the arch log2 routines
+ * - we use the non-const log2() instead if the arch has defined one suitable
+ */
+#ifndef ARCH_HAS_GET_ORDER
+static inline __attribute__((const))
+int __get_order(unsigned long size, int page_shift)
{
+#if BITS_PER_LONG == 32 && defined(ARCH_HAS_ILOG2_U32)
+ int order = __ilog2_u32(size) - page_shift;
+ return order >= 0 ? order : 0;
+#elif BITS_PER_LONG == 64 && defined(ARCH_HAS_ILOG2_U64)
+ int order = __ilog2_u64(size) - page_shift;
+ return order >= 0 ? order : 0;
+#else
int order;
- size = (size - 1) >> (PAGE_SHIFT - 1);
+ size = (size - 1) >> (page_shift - 1);
order = -1;
do {
size >>= 1;
order++;
} while (size);
return order;
+#endif
}
+#endif
+
+/**
+ * get_order - calculate log2(pages) to hold a block of the specified size
+ * @n - size
+ *
+ * calculate allocation order based on the current page size
+ * - this can be used to initialise global variables from constant data
+ */
+#define get_order(n) \
+( \
+ __builtin_constant_p(n) ? \
+ ((n < (1UL << PAGE_SHIFT)) ? 0 : ilog2(n) - PAGE_SHIFT) : \
+ __get_order(n, PAGE_SHIFT) \
+ )
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
/*
* Translate a "termio" structure into a "termios". Ugh.
*/
-static inline int user_termio_to_kernel_termios(struct termios *termios,
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
struct termio __user *termio)
{
unsigned short tmp;
* Translate a "termios" structure into a "termio". Ugh.
*/
static inline int kernel_termios_to_user_termio(struct termio __user *termio,
- struct termios *termios)
+ struct ktermios *termios)
{
if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
.stab.indexstr 0 : { *(.stab.indexstr) } \
.comment 0 : { *(.comment) }
+#define BUG_TABLE \
+ . = ALIGN(8); \
+ __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
+ __start___bug_table = .; \
+ *(__bug_table) \
+ __stop___bug_table = .; \
+ }
+
#define NOTES \
.notes : { *(.note.*) } :note
*(.initcall4s.init) \
*(.initcall5.init) \
*(.initcall5s.init) \
+ *(.initcallrootfs.init) \
*(.initcall6.init) \
*(.initcall6s.init) \
*(.initcall7.init) \
#define flush_cache_all()
#define flush_cache_mm(mm)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma,a,b)
#define flush_cache_page(vma,p,pfn)
#define flush_dcache_page(page)
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define ACPI_ENABLE_IRQS() local_irq_enable()
#define ACPI_FLUSH_CPU_CACHE() wbinvd()
-
-static inline int
-__acpi_acquire_global_lock (unsigned int *lock)
-{
- unsigned int old, new, val;
- do {
- old = *lock;
- new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
- val = cmpxchg(lock, old, new);
- } while (unlikely (val != old));
- return (new < 3) ? -1 : 0;
-}
-
-static inline int
-__acpi_release_global_lock (unsigned int *lock)
-{
- unsigned int old, new, val;
- do {
- old = *lock;
- new = old & ~0x3;
- val = cmpxchg(lock, old, new);
- } while (unlikely (val != old));
- return old & 0x1;
-}
+int __acpi_acquire_global_lock(unsigned int *lock);
+int __acpi_release_global_lock(unsigned int *lock);
#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr))
/*
* Tell the user there is some problem.
- * The offending file and line are encoded after the "officially
- * undefined" opcode for parsing in the trap handler.
+ * The offending file and line are encoded encoded in the __bug_table section.
*/
#ifdef CONFIG_BUG
#define HAVE_ARCH_BUG
+
#ifdef CONFIG_DEBUG_BUGVERBOSE
-#define BUG() \
- __asm__ __volatile__( "ud2\n" \
- "\t.word %c0\n" \
- "\t.long %c1\n" \
- : : "i" (__LINE__), "i" (__FILE__))
+#define BUG() \
+ do { \
+ asm volatile("1:\tud2\n" \
+ ".pushsection __bug_table,\"a\"\n" \
+ "2:\t.long 1b, %c0\n" \
+ "\t.word %c1, 0\n" \
+ "\t.org 2b+%c2\n" \
+ ".popsection" \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (sizeof(struct bug_entry))); \
+ for(;;) ; \
+ } while(0)
+
#else
-#define BUG() __asm__ __volatile__("ud2\n")
+#define BUG() \
+ do { \
+ asm volatile("ud2"); \
+ for(;;) ; \
+ } while(0)
#endif
#endif
/* Caches aren't brain-dead on the intel. */
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
static __inline__ unsigned long ide_default_io_base(int index)
{
+ struct pci_dev *pdev;
/*
* If PCI is present then it is not safe to poke around
* the other legacy IDE ports. Only 0x1f0 and 0x170 are
* defined compatibility mode ports for PCI. A user can
* override this using ide= but we must default safe.
*/
- if (pci_find_device(PCI_ANY_ID, PCI_ANY_ID, NULL) == NULL) {
+ if ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL)) == NULL) {
switch(index) {
case 2: return 0x1e8;
case 3: return 0x168;
case 5: return 0x160;
}
}
+ pci_dev_put(pdev);
switch (index) {
case 0: return 0x1f0;
case 1: return 0x170;
#define MSR_P6_PERFCTR0 0xc1
#define MSR_P6_PERFCTR1 0xc2
+#define MSR_FSB_FREQ 0xcd
+
#define MSR_IA32_BBL_CR_CTL 0x119
#define MSR_IA32_PERF_STATUS 0x198
#define MSR_IA32_PERF_CTL 0x199
+#define MSR_IA32_MPERF 0xE7
+#define MSR_IA32_APERF 0xE8
+
#define MSR_IA32_THERM_CONTROL 0x19a
#define MSR_IA32_THERM_INTERRUPT 0x19b
#define MSR_IA32_THERM_STATUS 0x19c
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define TIF_MEMDIE 16
#define TIF_DEBUG 17 /* uses debug registers */
#define TIF_IO_BITMAP 18 /* uses I/O bitmap */
+#define TIF_FREEZE 19 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_DEBUG (1<<TIF_DEBUG)
#define _TIF_IO_BITMAP (1<<TIF_IO_BITMAP)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK \
.flags = SD_LOAD_BALANCE \
| SD_BALANCE_EXEC \
| SD_BALANCE_FORK \
+ | SD_SERIALIZE \
| SD_WAKE_BALANCE, \
.last_balance = jiffies, \
.balance_interval = 1, \
* OS-specific debug break numbers:
*/
#define __IA64_BREAK_KDB 0x80100
-#define __IA64_BREAK_KPROBE 0x80200
-#define __IA64_BREAK_JPROBE 0x80300
+#define __IA64_BREAK_KPROBE 0x81000 /* .. 0x81fff */
+#define __IA64_BREAK_JPROBE 0x82000
/*
* OS-specific break numbers:
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_icache_page(vma,page) do { } while (0)
#define INST_FLAG_BREAK_INST 4
unsigned long inst_flag;
unsigned short target_br_reg;
+ unsigned short slot;
};
extern int kprobe_exceptions_notify(struct notifier_block *self,
#define pci_dac_dma_sync_single_for_cpu(dev,dma_addr,len,dir) do { } while (0)
#define pci_dac_dma_sync_single_for_device(dev,dma_addr,len,dir) do { mb(); } while (0)
-#define sg_dma_len(sg) ((sg)->dma_length)
-#define sg_dma_address(sg) ((sg)->dma_address)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
*/
#define ISA_DMA_THRESHOLD 0xffffffff
+#define sg_dma_len(sg) ((sg)->dma_length)
+#define sg_dma_address(sg) ((sg)->dma_address)
+
#endif /* _ASM_IA64_SCATTERLIST_H */
extern void xpc_dropped_IPI_check(struct xpc_partition *);
extern void xpc_activate_partition(struct xpc_partition *);
extern void xpc_activate_kthreads(struct xpc_channel *, int);
-extern void xpc_create_kthreads(struct xpc_channel *, int);
+extern void xpc_create_kthreads(struct xpc_channel *, int, int);
extern void xpc_disconnect_wait(int);
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define TIF_MEMDIE 17
#define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */
#define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */
+#define TIF_FREEZE 20 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_MCA_INIT (1 << TIF_MCA_INIT)
#define _TIF_DB_DISABLED (1 << TIF_DB_DISABLED)
+#define _TIF_FREEZE (1 << TIF_FREEZE)
/* "work to do on user-return" bits */
#define TIF_ALLWORK_MASK (_TIF_NOTIFY_RESUME|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
.flags = SD_LOAD_BALANCE \
| SD_BALANCE_EXEC \
| SD_BALANCE_FORK \
+ | SD_SERIALIZE \
| SD_WAKE_BALANCE, \
.last_balance = jiffies, \
.balance_interval = 64, \
#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
#elif defined(CONFIG_CHIP_M32102)
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
#else
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2)
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) \
+ || defined(CONFIG_PLAT_OPSPUT)
case 0x1f0: return PLD_IRQ_CFIREQ;
default:
return 0;
#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */
#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */
-#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32104)
+#if (defined(CONFIG_CHIP_M32700) && !defined(CONFIG_PLAT_MAPPI2)) \
+ || defined(CONFIG_CHIP_M32104)
#define M32R_MFTCR_MFT0MSK (1UL<<31) /* b0 */
#define M32R_MFTCR_MFT1MSK (1UL<<30) /* b1 */
#define M32R_MFTCR_MFT2MSK (1UL<<29) /* b2 */
#define M32R_MFTCR_MFT3EN (1UL<<20) /* b11 */
#define M32R_MFTCR_MFT4EN (1UL<<19) /* b12 */
#define M32R_MFTCR_MFT5EN (1UL<<18) /* b13 */
-#else /* not CONFIG_CHIP_M32700 && not CONFIG_CHIP_M32104 */
+#else
#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */
#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */
#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */
#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */
#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */
#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */
-#endif /* not CONFIG_CHIP_M32700 && not CONFIG_CHIP_M32104 */
+#endif
#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */
#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */
#define PT_R15 PT_SP
/* processor status and miscellaneous context registers. */
-#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
#define PT_ACC0H 15
#define PT_ACC0L 16
-#define PT_ACC1H 17
-#define PT_ACC1L 18
-#define PT_ACCH PT_ACC0H
-#define PT_ACCL PT_ACC0L
-#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
-#define PT_ACCH 15
-#define PT_ACCL 16
-#define PT_DUMMY_ACC1H 17
-#define PT_DUMMY_ACC1L 18
-#else
-#error unknown isa conifiguration
-#endif
+#define PT_ACC1H 17 /* ISA_DSP_LEVEL2 only */
+#define PT_ACC1L 18 /* ISA_DSP_LEVEL2 only */
#define PT_PSW 19
#define PT_BPC 20
#define PT_BBPSW 21
long syscall_nr;
/* Saved main processor status and miscellaneous context registers. */
-#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
unsigned long acc0h;
unsigned long acc0l;
- unsigned long acc1h;
- unsigned long acc1l;
-#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
- unsigned long acch;
- unsigned long accl;
- unsigned long dummy_acc1h;
- unsigned long dummy_acc1l;
-#else
-#error unknown isa configuration
-#endif
+ unsigned long acc1h; /* ISA_DSP_LEVEL2 only */
+ unsigned long acc1l; /* ISA_DSP_LEVEL2 only */
unsigned long psw;
unsigned long bpc; /* saved PC for TRAP syscalls */
unsigned long bbpsw;
unsigned long sc_r12;
/* Saved main processor status and miscellaneous context registers. */
-#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
unsigned long sc_acc0h;
unsigned long sc_acc0l;
- unsigned long sc_acc1h;
- unsigned long sc_acc1l;
-#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
- unsigned long sc_acch;
- unsigned long sc_accl;
- unsigned long sc_dummy_acc1h;
- unsigned long sc_dummy_acc1l;
-#else
-#error unknown isa configuration
-#endif
+ unsigned long sc_acc1h; /* ISA_DSP_LEVEL2 only */
+ unsigned long sc_acc1l; /* ISA_DSP_LEVEL2 only */
unsigned long sc_psw;
unsigned long sc_bpc; /* saved PC for TRAP syscalls */
unsigned long sc_bbpsw;
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
__flush_cache_030();
}
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
/* flush_cache_range/flush_cache_page must be macros to avoid
a dependency on linux/mm.h, which includes this file... */
static inline void flush_cache_range(struct vm_area_struct *vma,
#define KERNBASE 0xE000000 /* First address the kernel will eventually be */
#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */
-#define BI_START (KERNBASE + 0x3000) /* beginning of the bootinfo records */
#define FC_CONTROL 3
#define FC_SUPERD 5
#define FC_CPU 7
#include <asm/intersil.h>
#include <asm/oplib.h>
#include <asm/traps.h>
+#include <asm/irq.h>
#define SUN3_INT_VECS 192
+++ /dev/null
-/*
- * SWIM access through the IOP
- * Written by Joshua M. Thompson
- */
-
-/* IOP number and channel number for the SWIM */
-
-#define SWIM_IOP IOP_NUM_ISM
-#define SWIM_CHAN 1
-
-/* Command code: */
-
-#define CMD_INIT 0x01 /* Initialize */
-#define CMD_SHUTDOWN 0x02 /* Shutdown */
-#define CMD_START_POLL 0x03 /* Start insert/eject polling */
-#define CMD_STOP_POLL 0x04 /* Stop insert/eject polling */
-#define CMD_SETHFSTAG 0x05 /* Set HFS tag buffer address */
-#define CMD_STATUS 0x06 /* Status */
-#define CMD_EJECT 0x07 /* Eject */
-#define CMD_FORMAT 0x08 /* Format */
-#define CMD_FORMAT_VERIFY 0x09 /* Format and Verify */
-#define CMD_WRITE 0x0A /* Write */
-#define CMD_READ 0x0B /* Read */
-#define CMD_READ_VERIFY 0x0C /* Read and Verify */
-#define CMD_CACHE_CTRL 0x0D /* Cache control */
-#define CMD_TAGBUFF_CTRL 0x0E /* Tag buffer control */
-#define CMD_GET_ICON 0x0F /* Get Icon */
-
-/* Drive types: */
-
-/* note: apple sez DRV_FDHD is 4, but I get back a type */
-/* of 5 when I do a drive status check on my FDHD */
-
-#define DRV_NONE 0 /* No drive */
-#define DRV_UNKNOWN 1 /* Unspecified drive */
-#define DRV_400K 2 /* 400K */
-#define DRV_800K 3 /* 400K/800K */
-#define DRV_FDHD 5 /* 400K/800K/720K/1440K */
-#define DRV_HD20 7 /* Apple HD20 */
-
-/* Format types: */
-
-#define FMT_HD20 0x0001 /* Apple HD20 */
-#define FMT_400K 0x0002 /* 400K (GCR) */
-#define FMT_800K 0x0004 /* 800K (GCR) */
-#define FMT_720K 0x0008 /* 720K (MFM) */
-#define FMT_1440K 0x0010 /* 1.44M (MFM) */
-
-#define FMD_KIND_400K 1
-#define FMD_KIND_800K 2
-#define FMD_KIND_720K 3
-#define FMD_KIND_1440K 1
-
-/* Icon Flags: */
-
-#define ICON_MEDIA 0x01 /* Have IOP supply media icon */
-#define ICON_DRIVE 0x01 /* Have IOP supply drive icon */
-
-/* Error codes: */
-
-#define gcrOnMFMErr -400 /* GCR (400/800K) on HD media */
-#define verErr -84 /* verify failed */
-#define fmt2Err -83 /* can't get enough sync during format */
-#define fmt1Err -82 /* can't find sector 0 after track format */
-#define sectNFErr -81 /* can't find sector */
-#define seekErr -80 /* drive error during seek */
-#define spdAdjErr -79 /* can't set drive speed */
-#define twoSideErr -78 /* drive is single-sided */
-#define initIWMErr -77 /* error during initialization */
-#define tk0badErr -76 /* track zero is bad */
-#define cantStepErr -75 /* drive error during step */
-#define wrUnderrun -74 /* write underrun occurred */
-#define badDBtSlp -73 /* bad data bitslip marks */
-#define badDCksum -72 /* bad data checksum */
-#define noDtaMkErr -71 /* can't find data mark */
-#define badBtSlpErr -70 /* bad address bitslip marks */
-#define badCksmErr -69 /* bad address-mark checksum */
-#define dataVerErr -68 /* read-verify failed */
-#define noAdrMkErr -67 /* can't find an address mark */
-#define noNybErr -66 /* no nybbles? disk is probably degaussed */
-#define offLinErr -65 /* no disk in drive */
-#define noDriveErr -64 /* drive isn't connected */
-#define nsDrvErr -56 /* no such drive */
-#define paramErr -50 /* bad positioning information */
-#define wPrErr -44 /* write protected */
-#define openErr -23 /* already initialized */
-
-#ifndef __ASSEMBLY__
-
-struct swim_drvstatus {
- __u16 curr_track; /* Current track number */
- __u8 write_prot; /* 0x80 if disk is write protected */
- __u8 disk_in_drive; /* 0x01 or 0x02 if a disk is in the drive */
- __u8 installed; /* 0x01 if drive installed, 0xFF if not */
- __u8 num_sides; /* 0x80 if two-sided format supported */
- __u8 two_sided; /* 0xff if two-sided format diskette */
- __u8 new_interface; /* 0x00 if old 400K drive, 0xFF if newer */
- __u16 errors; /* Disk error count */
- struct { /* 32 bits */
- __u16 reserved;
- __u16 :4;
- __u16 external:1; /* Drive is external */
- __u16 scsi:1; /* Drive is a SCSI drive */
- __u16 fixed:1; /* Drive has fixed media */
- __u16 secondary:1; /* Drive is secondary drive */
- __u8 type; /* Drive type */
- } info;
- __u8 mfm_drive; /* 0xFF if this is an FDHD drive */
- __u8 mfm_disk; /* 0xFF if 720K/1440K (MFM) disk */
- __u8 mfm_format; /* 0x00 if 720K, 0xFF if 1440K */
- __u8 ctlr_type; /* 0x00 if IWM, 0xFF if SWIM */
- __u16 curr_format; /* Current format type */
- __u16 allowed_fmt; /* Allowed format types */
- __u32 num_blocks; /* Number of blocks on disk */
- __u8 icon_flags; /* Icon flags */
- __u8 unusued;
-};
-
-/* Commands issued from the host to the IOP: */
-
-struct swimcmd_init {
- __u8 code; /* CMD_INIT */
- __u8 unusued;
- __u16 error;
- __u8 drives[28]; /* drive type list */
-};
-
-struct swimcmd_startpoll {
- __u8 code; /* CMD_START_POLL */
- __u8 unusued;
- __u16 error;
-};
-
-struct swimcmd_sethfstag {
- __u8 code; /* CMD_SETHFSTAG */
- __u8 unusued;
- __u16 error;
- caddr_t tagbuf; /* HFS tag buffer address */
-};
-
-struct swimcmd_status {
- __u8 code; /* CMD_STATUS */
- __u8 drive_num;
- __u16 error;
- struct swim_drvstatus status;
-};
-
-struct swimcmd_eject {
- __u8 code; /* CMD_EJECT */
- __u8 drive_num;
- __u16 error;
- struct swim_drvstatus status;
-};
-
-struct swimcmd_format {
- __u8 code; /* CMD_FORMAT */
- __u8 drive_num;
- __u16 error;
- union {
- struct {
- __u16 fmt; /* format kind */
- __u8 hdrbyte; /* fmt byte for hdr (0=default) */
- __u8 interleave; /* interleave (0 = default) */
- caddr_t databuf; /* sector data buff (0=default */
- caddr_t tagbuf; /* tag data buffer (0=default) */
- } f;
- struct swim_drvstatus status;
- } p;
-};
-
-struct swimcmd_fmtverify {
- __u8 code; /* CMD_FORMAT_VERIFY */
- __u8 drive_num;
- __u16 error;
-};
-
-struct swimcmd_rw {
- __u8 code; /* CMD_READ, CMD_WRITE or CMD_READ_VERIFY */
- __u8 drive_num;
- __u16 error;
- caddr_t buffer; /* R/W buffer address */
- __u32 first_block; /* Starting block */
- __u32 num_blocks; /* Number of blocks */
- __u8 tag[12]; /* tag data */
-};
-
-struct swimcmd_cachectl {
- __u8 code; /* CMD_CACHE_CTRL */
- __u8 unused;
- __u16 error;
- __u8 enable; /* Nonzero to enable cache */
- __u8 install; /* +1 = install, -1 = remove, 0 = neither */
-};
-
-struct swimcmd_tagbufctl {
- __u8 code; /* CMD_TAGBUFF_CTRL */
- __u8 unused;
- __u16 error;
- caddr_t buf; /* buffer address or 0 to disable */
-};
-
-struct swimcmd_geticon {
- __u8 code; /* CMD_GET_ICON */
- __u8 drive_num;
- __u16 error;
- caddr_t buffer; /* Nuffer address */
- __u16 kind; /* 0 = media icon, 1 = drive icon */
- __u16 unused;
- __u16 max_bytes; /* maximum byte count */
-};
-
-/* Messages from the SWIM IOP to the host CPU: */
-
-struct swimmsg_status {
- __u8 code; /* 1 = insert, 2 = eject, 3 = status changed */
- __u8 drive_num;
- __u16 error;
- struct swim_drvstatus status;
-};
-
-#endif /* __ASSEMBLY__ */
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define flush_cache_all() __flush_cache_all()
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) __flush_cache_all()
#define flush_cache_page(vma, vmaddr) do { } while (0)
#define flush_dcache_range(start,len) __flush_cache_all()
#define MACH_PHILIPS_NINO 0 /* Nino */
#define MACH_PHILIPS_VELO 1 /* Velo */
#define MACH_PHILIPS_JBS 2 /* JBS */
+#define MACH_PHILIPS_STB810 3 /* STB810 */
/*
* Valid machtype for group SIBYTE
*
* - flush_cache_all() flushes entire cache
* - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ * - flush_cache_dup mm(mm) handles cache flushing when forking
* - flush_cache_page(mm, vmaddr, pfn) flushes a single page
* - flush_cache_range(vma, start, end) flushes a range of pages
* - flush_icache_range(start, end) flush a range of instructions
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
extern void (*flush_cache_mm)(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
extern void (*flush_cache_range)(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
*/
#include <linux/types.h>
#include <asm/page.h>
+#include <asm/ptrace.h>
#define COMPAT_USER_HZ 100
#ifndef __ASM_MACH_IP27_IRQ_H
#define __ASM_MACH_IP27_IRQ_H
-#include <asm/sn/arch.h>
-
/*
* A hardwired interrupt number is completly stupid for this system - a
* large configuration might have thousands if not tenthousands of
#ifndef _ASM_MACH_TOPOLOGY_H
#define _ASM_MACH_TOPOLOGY_H 1
-#include <asm/sn/arch.h>
#include <asm/sn/hub.h>
#include <asm/mmzone.h>
#ifndef __ASSEMBLY__
#include <linux/pfn.h>
-#include <asm/cpu-features.h>
#include <asm/io.h>
extern void clear_page(void * page);
flush_data_cache_page((unsigned long)addr);
}
-static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
- struct page *to)
-{
- extern void (*flush_data_cache_page)(unsigned long addr);
+extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to);
+struct vm_area_struct;
+extern void copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr, struct vm_area_struct *vma);
- copy_page(vto, vfrom);
- if (!cpu_has_ic_fills_f_dc ||
- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
- flush_data_cache_page((unsigned long)vto);
-}
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
/*
* These are used to make use of C type-checking..
/* Do platform specific device initialization at pci_enable_device() time */
extern int pcibios_plat_dev_init(struct pci_dev *dev);
+/* Chances are this interrupt is wired PC-style ... */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+ return channel ? 15 : 14;
+}
+
#endif /* _ASM_PCI_H */
extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+extern NORET_TYPE void die(const char *, struct pt_regs *);
+
+static inline void die_if_kernel(const char *str, struct pt_regs *regs)
+{
+ if (unlikely(!user_mode(regs)))
+ die(str, regs);
+}
+
#endif
#endif /* _ASM_PTRACE_H */
#endif
typedef u64 hubreg_t;
-typedef u64 nic_t;
#define cputonasid(cpu) (cpu_data[(cpu)].p_nasid)
#define cputoslice(cpu) (cpu_data[(cpu)].p_slice)
#endif /* CONFIG_SGI_IP35 */
#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
+typedef u64 nic_t;
+
#define KLCFGINFO_MAGIC 0xbeedbabe
typedef s32 klconf_off_t;
#include <asm/barrier.h>
#include <asm/cpu-features.h>
#include <asm/dsp.h>
-#include <asm/ptrace.h>
#include <asm/war.h>
extern unsigned long ebase;
extern void per_cpu_trap_init(void);
-extern NORET_TYPE void die(const char *, struct pt_regs *);
-
-static inline void die_if_kernel(const char *str, struct pt_regs *regs)
-{
- if (unlikely(!user_mode(regs)))
- die(str, regs);
-}
-
extern int stop_a_enabled;
/*
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0 /* Interrupt character [ISIG]. */
#define VQUIT 1 /* Quit character [ISIG]. */
/*
* But the RM200C seems to have been shipped only with V2.0 R4600s
*/
-#ifdef CONFIG_SNI_RM200_PCI
+#ifdef CONFIG_SNI_RM
#define R4600_V2_HIT_CACHEOP_WAR 1
#define flush_cache_mm(mm) flush_cache_all_local()
#endif
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
#define flush_kernel_dcache_range(start,size) \
flush_kernel_dcache_range_asm((start), (start)+(size));
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
header-y += poll.h
header-y += shmparam.h
header-y += sockios.h
-header-y += spu_info.h
header-y += ucontext.h
header-y += ioctl.h
header-y += linkage.h
unifdef-y += ptrace.h
unifdef-y += seccomp.h
unifdef-y += signal.h
+unifdef-y += spu_info.h
unifdef-y += termios.h
unifdef-y += types.h
unifdef-y += unistd.h
* Return the zero-based bit position (LE, not IBM bit numbering) of
* the most significant 1-bit in a double word.
*/
-static __inline__ int __ilog2(unsigned long x)
+static __inline__ __attribute__((const))
+int __ilog2(unsigned long x)
{
int lz;
return BITS_PER_LONG - 1 - lz;
}
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+ int bit;
+ asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n));
+ return 31 - bit;
+}
+
+#ifdef __powerpc64__
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+ int bit;
+ asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n));
+ return 63 - bit;
+}
+#endif
+
/*
* Determines the bit position of the least significant 0 bit in the
* specified double word. The returned bit position will be
#ifndef __ASSEMBLY__
-struct bug_entry {
- unsigned long bug_addr;
- long line;
- const char *file;
- const char *function;
-};
-
-struct bug_entry *find_bug(unsigned long bugaddr);
-
-/*
- * If this bit is set in the line number it means that the trap
- * is for WARN_ON rather than BUG or BUG_ON.
- */
-#define BUG_WARNING_TRAP 0x1000000
-
#ifdef CONFIG_BUG
+/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
+ sizeof(struct bug_entry), respectively */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY \
+ ".section __bug_table,\"a\"\n" \
+ "2:\t" PPC_LONG "1b, %0\n" \
+ "\t.short %1, %2\n" \
+ ".org 2b+%3\n" \
+ ".previous\n"
+#else
+#define _EMIT_BUG_ENTRY \
+ ".section __bug_table,\"a\"\n" \
+ "2:\t" PPC_LONG "1b\n" \
+ "\t.short %2\n" \
+ ".org 2b+%3\n" \
+ ".previous\n"
+#endif
+
/*
* BUG_ON() and WARN_ON() do their best to cooperate with compile-time
* optimisations. However depending on the complexity of the condition
* some compiler versions may not produce optimal results.
*/
-#define BUG() do { \
- __asm__ __volatile__( \
- "1: twi 31,0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%0,%1,%2\n" \
- ".previous" \
- : : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \
+#define BUG() do { \
+ __asm__ __volatile__( \
+ "1: twi 31,0,0\n" \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (0), "i" (sizeof(struct bug_entry))); \
+ for(;;) ; \
} while (0)
#define BUG_ON(x) do { \
BUG(); \
} else { \
__asm__ __volatile__( \
- "1: "PPC_TLNEI" %0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%1,%2,%3\n" \
- ".previous" \
- : : "r" ((long)(x)), "i" (__LINE__), \
- "i" (__FILE__), "i" (__FUNCTION__)); \
+ "1: "PPC_TLNEI" %4,0\n" \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), "i" (0), \
+ "i" (sizeof(struct bug_entry)), \
+ "r" ((long)(x))); \
} \
} while (0)
#define __WARN() do { \
__asm__ __volatile__( \
"1: twi 31,0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%0,%1,%2\n" \
- ".previous" \
- : : "i" (__LINE__ + BUG_WARNING_TRAP), \
- "i" (__FILE__), "i" (__FUNCTION__)); \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (BUGFLAG_WARNING), \
+ "i" (sizeof(struct bug_entry))); \
} while (0)
#define WARN_ON(x) ({ \
__WARN(); \
} else { \
__asm__ __volatile__( \
- "1: "PPC_TLNEI" %0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%1,%2,%3\n" \
- ".previous" \
- : : "r" (__ret_warn_on), \
- "i" (__LINE__ + BUG_WARNING_TRAP), \
- "i" (__FILE__), "i" (__FUNCTION__)); \
+ "1: "PPC_TLNEI" %4,0\n" \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (BUGFLAG_WARNING), \
+ "i" (sizeof(struct bug_entry)), \
+ "r" (__ret_warn_on)); \
} \
unlikely(__ret_warn_on); \
})
*/
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_icache_page(vma, page) do { } while (0)
#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000)
#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000)
#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000)
+#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000)
/*
* Add the 64-bit processor unique features in the top half of the word;
#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000)
#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000)
#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000)
+#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000)
#ifndef __ASSEMBLY__
#define CPU_FTRS_E300 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
CPU_FTR_COMMON)
+#define CPU_FTRS_E300C2 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
+ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
#define CPU_FTRS_8XX (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB)
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
- CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE)
+ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+ CPU_FTR_DSCR)
#define CPU_FTRS_POWER6X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | \
- CPU_FTR_SPURR | CPU_FTR_REAL_LE)
+ CPU_FTR_SPURR | CPU_FTR_REAL_LE | CPU_FTR_DSCR)
#define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 |
CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 |
CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
- CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_CLASSIC32 |
+ CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
+ CPU_FTRS_CLASSIC32 |
#else
CPU_FTRS_GENERIC_32 |
#endif
CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 &
CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 &
CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
- CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_CLASSIC32 &
+ CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
+ CPU_FTRS_CLASSIC32 &
#else
CPU_FTRS_GENERIC_32 &
#endif
#ifndef _ASM_POWERPC_DCR_NATIVE_H
#define _ASM_POWERPC_DCR_NATIVE_H
#ifdef __KERNEL__
-
-#include <asm/reg.h>
+#ifndef __ASSEMBLY__
typedef struct {} dcr_host_t;
#define dcr_read(host, dcr_n) mfdcr(dcr_n)
#define dcr_write(host, dcr_n, value) mtdcr(dcr_n, value)
+/* Device Control Registers */
+void __mtdcr(int reg, unsigned int val);
+unsigned int __mfdcr(int reg);
+#define mfdcr(rn) \
+ ({unsigned int rval; \
+ if (__builtin_constant_p(rn)) \
+ asm volatile("mfdcr %0," __stringify(rn) \
+ : "=r" (rval)); \
+ else \
+ rval = __mfdcr(rn); \
+ rval;})
+
+#define mtdcr(rn, v) \
+do { \
+ if (__builtin_constant_p(rn)) \
+ asm volatile("mtdcr " __stringify(rn) ",%0" \
+ : : "r" (v)); \
+ else \
+ __mtdcr(rn, v); \
+} while (0)
+
+/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
+#define mfdcri(base, reg) \
+({ \
+ mtdcr(base ## _CFGADDR, base ## _ ## reg); \
+ mfdcr(base ## _CFGDATA); \
+})
+
+#define mtdcri(base, reg, data) \
+do { \
+ mtdcr(base ## _CFGADDR, base ## _ ## reg); \
+ mtdcr(base ## _CFGDATA, data); \
+} while (0)
+#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_NATIVE_H */
#ifndef _ASM_POWERPC_DCR_H
#define _ASM_POWERPC_DCR_H
#ifdef __KERNEL__
+#ifdef CONFIG_PPC_DCR
#ifdef CONFIG_PPC_DCR_NATIVE
#include <asm/dcr-native.h>
unsigned int index);
#endif /* CONFIG_PPC_MERGE */
+#endif /* CONFIG_PPC_DCR */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_H */
#endif /* CONFIG_PPC64 */
-#define mask_irq(irq) \
- ({ \
- irq_desc_t *desc = get_irq_desc(irq); \
- if (desc->chip && desc->chip->disable) \
- desc->chip->disable(irq); \
- })
-#define unmask_irq(irq) \
- ({ \
- irq_desc_t *desc = get_irq_desc(irq); \
- if (desc->chip && desc->chip->enable) \
- desc->chip->enable(irq); \
- })
-#define ack_irq(irq) \
- ({ \
- irq_desc_t *desc = get_irq_desc(irq); \
- if (desc->chip && desc->chip->ack) \
- desc->chip->ack(irq); \
- })
-
/*
* interrupt-retrigger: should we handle this via lost interrupts and IPIs
* or should we not care like we do now ? --BenH.
unsigned int num_bugs;
};
-extern struct bug_entry *module_find_bug(unsigned long bugaddr);
-
/*
* Select ELF headers.
* Make empty section for module_frob_arch_sections to expand.
static inline void clear_page(void *page) { clear_pages(page, 0); }
extern void copy_page(void *to, void *from);
-/* Pure 2^n version of get_order */
-extern __inline__ int get_order(unsigned long size)
-{
- int lz;
-
- size = (size-1) >> PAGE_SHIFT;
- asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
- return 32 - lz;
-}
+#include <asm-generic/page.h>
#endif /* __ASSEMBLY__ */
int last_busno;
void __iomem *io_base_virt;
- unsigned long io_base_phys;
+ resource_size_t io_base_phys;
/* Some machines have a non 1:1 mapping of
* the PCI memory space in the CPU bus space
*/
- unsigned long pci_mem_offset;
+ resource_size_t pci_mem_offset;
unsigned long pci_io_size;
struct pci_ops *ops;
/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
#define HAVE_PCI_MMAP 1
-#ifdef CONFIG_PPC64
-/* pci_unmap_{single,page} is not a nop, thus... */
+#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
+/*
+ * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
+ * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
+ * so on are not nops.
+ * and thus...
+ */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
+#else /* 32-bit && coherent */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME) (0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME) (0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
+
+#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
/* The PCI address space does not equal the physical memory address
* space (we have an IOMMU). The IDE and SCSI device layers use
* this boolean for bounce buffer decisions.
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
#endif /* CONFIG_PPC64 */
-
+
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region,
struct resource *res);
/* Special Purpose Registers (SPRNs)*/
#define SPRN_CTR 0x009 /* Count Register */
+#define SPRN_DSCR 0x11
#define SPRN_CTRLF 0x088
#define SPRN_CTRLT 0x098
#define CTRL_CT 0xc0000000 /* current thread */
#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
+#define SPRN_SPURR 0x134 /* Scaled PURR */
#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
extern void enter_rtas(unsigned long);
extern int rtas_token(const char *service);
+extern int rtas_service_present(const char *service);
extern int rtas_call(int token, int, int, int *, ...);
extern void rtas_restart(char *cmd);
extern void rtas_power_off(void);
extern spinlock_t rtas_data_buf_lock;
extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
-extern void rtas_stop_self(void);
-
/* RMO buffer reserved for user-space RTAS use */
extern unsigned long rtas_rmo_buf;
speed_t c_ospeed; /* output speed */
};
+/* For PowerPC the termios and ktermios are the same */
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_cc[NCCS]; /* control characters */
+ cc_t c_line; /* line discipline (== c_cc[19]) */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define TIF_RESTOREALL 12 /* Restore all regs (implies NOERROR) */
#define TIF_NOERROR 14 /* Force successful syscall return */
#define TIF_RESTORE_SIGMASK 15 /* Restore signal mask in do_signal */
+#define TIF_FREEZE 16 /* Freezing for suspend */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_RESTOREALL (1<<TIF_RESTOREALL)
#define _TIF_NOERROR (1<<TIF_NOERROR)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
#define _TIF_USER_WORK_MASK (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \
| SD_BALANCE_EXEC \
| SD_BALANCE_NEWIDLE \
| SD_WAKE_IDLE \
+ | SD_SERIALIZE \
| SD_WAKE_BALANCE, \
.last_balance = jiffies, \
.balance_interval = 1, \
extern struct pci_controller* pcibios_alloc_controller(void);
/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
- unsigned long end, int flags, char *name);
+extern void pci_init_resource(struct resource *res, resource_size_t start,
+ resource_size_t end, int flags, char *name);
/* Get the PCI host controller for a bus */
extern struct pci_controller* pci_bus_to_hose(int bus);
int bus_offset;
void __iomem *io_base_virt;
- unsigned long io_base_phys;
+ resource_size_t io_base_phys;
/* Some machines (PReP) have a non 1:1 mapping of
* the PCI memory space in the CPU bus space
*/
- unsigned long pci_mem_offset;
+ resource_size_t pci_mem_offset;
struct pci_ops *ops;
volatile unsigned int __iomem *cfg_addr;
*/
#define PCI_DMA_BUS_IS_PHYS (1)
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * pci_unmap_{page,single} are NOPs but pci_dma_sync_single_for_cpu()
+ * and so on are not, so...
+ */
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
+ dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
+ __u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME) \
+ ((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
+ (((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME) \
+ ((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
+ (((PTR)->LEN_NAME) = (VAL))
+
+#else /* coherent */
+
/* pci_unmap_{page,single} is a nop so... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
#ifndef __ASM_PPC_REG_BOOKE_H__
#define __ASM_PPC_REG_BOOKE_H__
-#ifndef __ASSEMBLY__
-/* Device Control Registers */
-void __mtdcr(int reg, unsigned int val);
-unsigned int __mfdcr(int reg);
-#define mfdcr(rn) \
- ({unsigned int rval; \
- if (__builtin_constant_p(rn)) \
- asm volatile("mfdcr %0," __stringify(rn) \
- : "=r" (rval)); \
- else \
- rval = __mfdcr(rn); \
- rval;})
-
-#define mtdcr(rn, v) \
-do { \
- if (__builtin_constant_p(rn)) \
- asm volatile("mtdcr " __stringify(rn) ",%0" \
- : : "r" (v)); \
- else \
- __mtdcr(rn, v); \
-} while (0)
-
-/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
-#define mfdcri(base, reg) \
-({ \
- mtdcr(base ## _CFGADDR, base ## _ ## reg); \
- mfdcr(base ## _CFGDATA); \
-})
-
-#define mtdcri(base, reg, data) \
-do { \
- mtdcr(base ## _CFGADDR, base ## _ ## reg); \
- mtdcr(base ## _CFGDATA, data); \
-} while (0)
+#include <asm/dcr.h>
+#ifndef __ASSEMBLY__
/* Performance Monitor Registers */
#define mfpmr(rn) ({unsigned int rval; \
asm volatile("mfpmr %0," __stringify(rn) \
/* Caches aren't brain-dead on the s390. */
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
* 0x01: readonly (ro)
* 0x02: use diag discipline (diag)
* 0x04: set the device initially online (internal use only)
+ * 0x08: enable ERP related logging
*/
#define DASD_FEATURE_DEFAULT 0x00
#define DASD_FEATURE_READONLY 0x01
#define DASD_FEATURE_USEDIAG 0x02
#define DASD_FEATURE_INITIAL_ONLINE 0x04
+#define DASD_FEATURE_ERPLOG 0x08
#define DASD_PARTN_BITS 2
return skey;
}
+extern unsigned long max_pfn;
+
+static inline int pfn_valid(unsigned long pfn)
+{
+ unsigned long dummy;
+ int ccode;
+
+ if (pfn >= max_pfn)
+ return 0;
+
+ asm volatile(
+ " lra %0,0(%2)\n"
+ " ipm %1\n"
+ " srl %1,28\n"
+ : "=d" (dummy), "=d" (ccode)
+ : "a" (pfn << PAGE_SHIFT)
+ : "cc");
+ return !ccode;
+}
+
#endif /* !__ASSEMBLY__ */
/* to align the pointer to the (next) page boundary */
#define __va(x) (void *)(unsigned long)(x)
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
* Page allocation orders.
*/
#ifndef __s390x__
+# define PTE_ALLOC_ORDER 0
+# define PMD_ALLOC_ORDER 0
# define PGD_ALLOC_ORDER 1
#else /* __s390x__ */
+# define PTE_ALLOC_ORDER 0
# define PMD_ALLOC_ORDER 2
# define PGD_ALLOC_ORDER 2
#endif /* __s390x__ */
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
+extern unsigned long vmalloc_end;
#define VMALLOC_OFFSET (8*1024*1024)
#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) \
& ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END vmalloc_end
/*
* We need some free virtual space to be able to do vmalloc.
* VMALLOC_MIN_SIZE defines the minimum size of the vmalloc
* area. On a machine with 2GB memory we make sure that we
* have at least 128MB free space for vmalloc. On a machine
- * with 4TB we make sure we have at least 1GB.
+ * with 4TB we make sure we have at least 128GB.
*/
#ifndef __s390x__
#define VMALLOC_MIN_SIZE 0x8000000UL
-#define VMALLOC_END 0x80000000UL
+#define VMALLOC_END_INIT 0x80000000UL
#else /* __s390x__ */
-#define VMALLOC_MIN_SIZE 0x40000000UL
-#define VMALLOC_END 0x40000000000UL
+#define VMALLOC_MIN_SIZE 0x2000000000UL
+#define VMALLOC_END_INIT 0x40000000000UL
#endif /* __s390x__ */
/*
#define kern_addr_valid(addr) (1)
+extern int add_shared_memory(unsigned long start, unsigned long size);
+extern int remove_shared_memory(unsigned long start, unsigned long size);
+
/*
* No page table caches to initialise
*/
#define pgtable_cache_init() do { } while (0)
+#define __HAVE_ARCH_MEMMAP_INIT
+extern void memmap_init(unsigned long, int, unsigned long, unsigned long);
+
#define __HAVE_ARCH_PTEP_ESTABLISH
#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
--- /dev/null
+#ifndef __ASM_SH_ATOMIC_IRQ_H
+#define __ASM_SH_ATOMIC_IRQ_H
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ *(long *)v += i;
+ local_irq_restore(flags);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ *(long *)v -= i;
+ local_irq_restore(flags);
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long temp, flags;
+
+ local_irq_save(flags);
+ temp = *(long *)v;
+ temp += i;
+ *(long *)v = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long temp, flags;
+
+ local_irq_save(flags);
+ temp = *(long *)v;
+ temp -= i;
+ *(long *)v = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ *(long *)v &= ~mask;
+ local_irq_restore(flags);
+}
+
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ *(long *)v |= mask;
+ local_irq_restore(flags);
+}
+
+#endif /* __ASM_SH_ATOMIC_IRQ_H */
--- /dev/null
+#ifndef __ASM_SH_ATOMIC_LLSC_H
+#define __ASM_SH_ATOMIC_LLSC_H
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%2, %0 ! atomic_add \n"
+" add %1, %0 \n"
+" movco.l %0, @%2 \n"
+" bf 1b \n"
+ : "=&z" (tmp)
+ : "r" (i), "r" (&v->counter)
+ : "t");
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%2, %0 ! atomic_sub \n"
+" sub %1, %0 \n"
+" movco.l %0, @%2 \n"
+" bf 1b \n"
+ : "=&z" (tmp)
+ : "r" (i), "r" (&v->counter)
+ : "t");
+}
+
+/*
+ * SH-4A note:
+ *
+ * We basically get atomic_xxx_return() for free compared with
+ * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
+ * encoding, so the retval is automatically set without having to
+ * do any special work.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long temp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%2, %0 ! atomic_add_return \n"
+" add %1, %0 \n"
+" movco.l %0, @%2 \n"
+" bf 1b \n"
+" synco \n"
+ : "=&z" (temp)
+ : "r" (i), "r" (&v->counter)
+ : "t");
+
+ return temp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long temp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%2, %0 ! atomic_sub_return \n"
+" sub %1, %0 \n"
+" movco.l %0, @%2 \n"
+" bf 1b \n"
+" synco \n"
+ : "=&z" (temp)
+ : "r" (i), "r" (&v->counter)
+ : "t");
+
+ return temp;
+}
+
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%2, %0 ! atomic_clear_mask \n"
+" and %1, %0 \n"
+" movco.l %0, @%2 \n"
+" bf 1b \n"
+ : "=&z" (tmp)
+ : "r" (~mask), "r" (&v->counter)
+ : "t");
+}
+
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%2, %0 ! atomic_set_mask \n"
+" or %1, %0 \n"
+" movco.l %0, @%2 \n"
+" bf 1b \n"
+ : "=&z" (tmp)
+ : "r" (mask), "r" (&v->counter)
+ : "t");
+}
+
+#endif /* __ASM_SH_ATOMIC_LLSC_H */
#include <linux/compiler.h>
#include <asm/system.h>
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-static inline void atomic_add(int i, atomic_t *v)
-{
#ifdef CONFIG_CPU_SH4A
- unsigned long tmp;
-
- __asm__ __volatile__ (
-"1: movli.l @%2, %0 ! atomic_add \n"
-" add %1, %0 \n"
-" movco.l %0, @%2 \n"
-" bf 1b \n"
- : "=&z" (tmp)
- : "r" (i), "r" (&v->counter)
- : "t");
+#include <asm/atomic-llsc.h>
#else
- unsigned long flags;
-
- local_irq_save(flags);
- *(long *)v += i;
- local_irq_restore(flags);
-#endif
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
-#ifdef CONFIG_CPU_SH4A
- unsigned long tmp;
-
- __asm__ __volatile__ (
-"1: movli.l @%2, %0 ! atomic_sub \n"
-" sub %1, %0 \n"
-" movco.l %0, @%2 \n"
-" bf 1b \n"
- : "=&z" (tmp)
- : "r" (i), "r" (&v->counter)
- : "t");
-#else
- unsigned long flags;
-
- local_irq_save(flags);
- *(long *)v -= i;
- local_irq_restore(flags);
+#include <asm/atomic-irq.h>
#endif
-}
-
-/*
- * SH-4A note:
- *
- * We basically get atomic_xxx_return() for free compared with
- * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
- * encoding, so the retval is automatically set without having to
- * do any special work.
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
- unsigned long temp;
-
-#ifdef CONFIG_CPU_SH4A
- __asm__ __volatile__ (
-"1: movli.l @%2, %0 ! atomic_add_return \n"
-" add %1, %0 \n"
-" movco.l %0, @%2 \n"
-" bf 1b \n"
-" synco \n"
- : "=&z" (temp)
- : "r" (i), "r" (&v->counter)
- : "t");
-#else
- unsigned long flags;
-
- local_irq_save(flags);
- temp = *(long *)v;
- temp += i;
- *(long *)v = temp;
- local_irq_restore(flags);
-#endif
-
- return temp;
-}
#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
- unsigned long temp;
-
-#ifdef CONFIG_CPU_SH4A
- __asm__ __volatile__ (
-"1: movli.l @%2, %0 ! atomic_sub_return \n"
-" sub %1, %0 \n"
-" movco.l %0, @%2 \n"
-" bf 1b \n"
-" synco \n"
- : "=&z" (temp)
- : "r" (i), "r" (&v->counter)
- : "t");
-#else
- unsigned long flags;
-
- local_irq_save(flags);
- temp = *(long *)v;
- temp -= i;
- *(long *)v = temp;
- local_irq_restore(flags);
-#endif
-
- return temp;
-}
-
#define atomic_dec_return(v) atomic_sub_return(1,(v))
#define atomic_inc_return(v) atomic_add_return(1,(v))
}
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
-{
-#ifdef CONFIG_CPU_SH4A
- unsigned long tmp;
-
- __asm__ __volatile__ (
-"1: movli.l @%2, %0 ! atomic_clear_mask \n"
-" and %1, %0 \n"
-" movco.l %0, @%2 \n"
-" bf 1b \n"
- : "=&z" (tmp)
- : "r" (~mask), "r" (&v->counter)
- : "t");
-#else
- unsigned long flags;
-
- local_irq_save(flags);
- *(long *)v &= ~mask;
- local_irq_restore(flags);
-#endif
-}
-
-static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
-{
-#ifdef CONFIG_CPU_SH4A
- unsigned long tmp;
-
- __asm__ __volatile__ (
-"1: movli.l @%2, %0 ! atomic_set_mask \n"
-" or %1, %0 \n"
-" movco.l %0, @%2 \n"
-" bf 1b \n"
- : "=&z" (tmp)
- : "r" (mask), "r" (&v->counter)
- : "t");
-#else
- unsigned long flags;
-
- local_irq_save(flags);
- *(long *)v |= mask;
- local_irq_restore(flags);
-#endif
-}
-
/* Atomic operations are already serializing on SH */
#define smp_mb__before_atomic_dec() barrier()
#define smp_mb__after_atomic_dec() barrier()
#ifndef __ASM_SH_BUG_H
#define __ASM_SH_BUG_H
-
#ifdef CONFIG_BUG
-/*
- * Tell the user there is some problem.
- */
-#define BUG() do { \
- printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
- *(volatile int *)0 = 0; \
+
+struct bug_frame {
+ unsigned short opcode;
+ unsigned short line;
+ const char *file;
+ const char *func;
+};
+
+struct pt_regs;
+
+extern void handle_BUG(struct pt_regs *);
+
+#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define BUG() \
+do { \
+ __asm__ __volatile__ ( \
+ ".align 2\n\t" \
+ ".short %O0\n\t" \
+ ".short %O1\n\t" \
+ ".long %O2\n\t" \
+ ".long %O3\n\t" \
+ : \
+ : "n" (TRAPA_BUG_OPCODE), \
+ "i" (__LINE__), "X" (__FILE__), \
+ "X" (__FUNCTION__)); \
+} while (0)
+
+#else
+
+#define BUG() \
+do { \
+ __asm__ __volatile__ ( \
+ ".align 2\n\t" \
+ ".short %O0\n\t" \
+ : \
+ : "n" (TRAPA_BUG_OPCODE)); \
} while (0)
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
#define HAVE_ARCH_BUG
-#endif
+
+#endif /* CONFIG_BUG */
#include <asm-generic/bug.h>
-#endif
+#endif /* __ASM_SH_BUG_H */
static void __init check_bugs(void)
{
- extern char *get_cpu_subtype(void);
extern unsigned long loops_per_jiffy;
- char *p= &init_utsname()->machine[2]; /* "sh" */
+ char *p = &init_utsname()->machine[2]; /* "sh" */
cpu_data->loops_per_jiffy = loops_per_jiffy;
*p++ = '4';
*p++ = 'a';
break;
+ case CPU_SH73180 ... CPU_SH7722:
+ *p++ = '4';
+ *p++ = 'a';
+ *p++ = 'l';
+ *p++ = '-';
+ *p++ = 'd';
+ *p++ = 's';
+ *p++ = 'p';
+ break;
default:
*p++ = '?';
*p++ = '!';
*/
asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
- int len, __wsum sum, int *src_err_ptr, int *dst_err_ptr);
+ int len, __wsum sum,
+ int *src_err_ptr, int *dst_err_ptr);
/*
* Note: when you get a NULL pointer exception here this means someone
- * passed in an incorrect kernel address to one of these functions.
- *
- * If you use these functions directly please don't forget the
+ * passed in an incorrect kernel address to one of these functions.
+ *
+ * If you use these functions directly please don't forget the
* access_ok().
*/
-static __inline__
+static inline
__wsum csum_partial_copy_nocheck(const void *src, void *dst,
- int len, __wsum sum)
+ int len, __wsum sum)
{
- return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL);
+ return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
}
-static __inline__
+static inline
__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *err_ptr)
+ int len, __wsum sum, int *err_ptr)
{
return csum_partial_copy_generic((__force const void *)src, dst,
len, sum, err_ptr, NULL);
* Fold a partial checksum
*/
-static __inline__ __sum16 csum_fold(__wsum sum)
+static inline __sum16 csum_fold(__wsum sum)
{
unsigned int __dummy;
__asm__("swap.w %0, %1\n\t"
* i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
* for linux by * Arnt Gulbrandsen.
*/
-static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
{
unsigned int sum, __dummy0, __dummy1;
return csum_fold(sum);
}
-static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
{
#ifdef __LITTLE_ENDIAN__
unsigned long len_proto = (proto + len) << 8;
: "=r" (sum), "=r" (len_proto)
: "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
: "t");
+
return sum;
}
* computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented
*/
-static __inline__ __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
}
/*
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
-
-static __inline__ __sum16 ip_compute_csum(const void *buff, int len)
+static inline __sum16 ip_compute_csum(const void *buff, int len)
{
- return csum_fold (csum_partial(buff, len, 0));
+ return csum_fold(csum_partial(buff, len, 0));
}
#define _HAVE_ARCH_IPV6_CSUM
-#ifdef CONFIG_IPV6
-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
- const struct in6_addr *daddr,
- __u32 len, unsigned short proto,
- __wsum sum)
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+ const struct in6_addr *daddr,
+ __u32 len, unsigned short proto,
+ __wsum sum)
{
unsigned int __dummy;
__asm__("clrt\n\t"
"movt %1\n\t"
"add %1, %0\n"
: "=r" (sum), "=&r" (__dummy)
- : "r" (saddr), "r" (daddr),
+ : "r" (saddr), "r" (daddr),
"r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
: "t");
return csum_fold(sum);
}
-#endif
-/*
+/*
* Copy and checksum to user
*/
#define HAVE_CSUM_COPY_USER
-static __inline__ __wsum csum_and_copy_to_user (const void *src,
- void __user *dst,
- int len, __wsum sum,
- int *err_ptr)
+static inline __wsum csum_and_copy_to_user(const void *src,
+ void __user *dst,
+ int len, __wsum sum,
+ int *err_ptr)
{
if (access_ok(VERIFY_WRITE, dst, len))
return csum_partial_copy_generic((__force const void *)src,
*
* - flush_cache_all() flushes entire cache
* - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ * - flush_cache_dup mm(mm) handles cache flushing when forking
* - flush_cache_page(mm, vmaddr, pfn) flushes a single page
* - flush_cache_range(vma, start, end) flushes a range of pages
*
*/
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
*
* - flush_cache_all() flushes entire cache
* - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ * - flush_cache_dup mm(mm) handles cache flushing when forking
* - flush_cache_page(mm, vmaddr, pfn) flushes a single page
* - flush_cache_range(vma, start, end) flushes a range of pages
*
void flush_cache_all(void);
void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
#else
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */
#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */
#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */
-#ifndef CONFIG_CPU_SUBTYPE_SH7780
+#ifndef CONFIG_CPU_SH4A
#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */
#endif
*/
void flush_cache_all(void);
void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
#ifndef __ASM_CPU_SH4_FREQ_H
#define __ASM_CPU_SH4_FREQ_H
-#if defined(CONFIG_CPU_SUBTYPE_SH73180)
+#if defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7722)
#define FRQCR 0xa4150000
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
#define FRQCR 0xffc80000
if (dev->bus == &pci_bus_type)
return virt_to_bus(ptr);
#endif
- dma_cache_sync(ptr, size, dir);
+ dma_cache_sync(dev, ptr, size, dir);
return virt_to_bus(ptr);
}
for (i = 0; i < nents; i++) {
#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, dir);
#endif
sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
if (dev->bus == &pci_bus_type)
return;
#endif
- dma_cache_sync(bus_to_virt(dma_handle), size, dir);
+ dma_cache_sync(dev, bus_to_virt(dma_handle), size, dir);
}
static inline void dma_sync_single_range(struct device *dev,
if (dev->bus == &pci_bus_type)
return;
#endif
- dma_cache_sync(bus_to_virt(dma_handle) + offset, size, dir);
+ dma_cache_sync(dev, bus_to_virt(dma_handle) + offset, size, dir);
}
static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
for (i = 0; i < nelems; i++) {
#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
- dma_cache_sync(page_address(sg[i].page) + sg[i].offset,
+ dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
sg[i].length, dir);
#endif
sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
# define ONCHIP_NR_IRQS 144
#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
defined(CONFIG_CPU_SUBTYPE_SH73180) || \
- defined(CONFIG_CPU_SUBTYPE_SH7343)
+ defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7722)
# define ONCHIP_NR_IRQS 109
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
# define ONCHIP_NR_IRQS 111
# define OFFCHIP_NR_IRQS 16
#elif defined(CONFIG_SH_7343_SOLUTION_ENGINE)
# define OFFCHIP_NR_IRQS 12
+#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
+# define OFFCHIP_NR_IRQS 14
#elif defined(CONFIG_SH_UNKNOWN)
# define OFFCHIP_NR_IRQS 16 /* Must also be last */
#else
extern void update_mmu_cache(struct vm_area_struct * vma,
unsigned long address, pte_t pte);
-/* Encode and de-code a swap entry */
/*
+ * Encode and de-code a swap entry
+ *
+ * Constraints:
+ * _PAGE_FILE at bit 0
+ * _PAGE_PRESENT at bit 8
+ * _PAGE_PROTNONE at bit 9
+ *
+ * For the normal case, we encode the swap type into bits 0:7 and the
+ * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
+ * preserved bits in the low 32-bits and use the upper 32 as the swap
+ * offset (along with a 5-bit type), following the same approach as x86
+ * PAE. This keeps the logic quite simple, and allows for a full 32
+ * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with
+ * in the pte_low case.
+ *
+ * As is evident by the Alpha code, if we ever get a 64-bit unsigned
+ * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
+ * much cleaner..
+ *
* NOTE: We should set ZEROs at the position of _PAGE_PRESENT
* and _PAGE_PROTNONE bits
*/
-#define __swp_type(x) ((x).val & 0xff)
-#define __swp_offset(x) ((x).val >> 10)
-#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 10) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 })
+#ifdef CONFIG_X2TLB
+#define __swp_type(x) ((x).val & 0x1f)
+#define __swp_offset(x) ((x).val >> 5)
+#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5})
+#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
+#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define pte_to_pgoff(pte) ((pte).pte_high)
+#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) })
+
+#define PTE_FILE_MAX_BITS 32
+#else
+#define __swp_type(x) ((x).val & 0xff)
+#define __swp_offset(x) ((x).val >> 10)
+#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10})
+
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 })
/*
* Encode and decode a nonlinear file mapping entry
#define PTE_FILE_MAX_BITS 29
#define pte_to_pgoff(pte) (pte_val(pte) >> 1)
#define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE })
+#endif
typedef pte_t *pte_addr_t;
#define CCN_CVR 0xff000040
#define CCN_PRR 0xff000044
+const char *get_cpu_subtype(void);
+
/*
* CPU type and hardware bug flags. Kept separately for each CPU.
*
CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
/* SH-4A types */
- CPU_SH73180, CPU_SH7343, CPU_SH7770, CPU_SH7780, CPU_SH7781,
- CPU_SH7785,
+ CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+
+ /* SH4AL-DSP types */
+ CPU_SH73180, CPU_SH7343, CPU_SH7722,
/* Unknown subtype */
CPU_SH_NONE
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
+#include <linux/platform_device.h>
struct push_switch {
/* switch state */
struct timer_list debounce;
/* workqueue */
struct work_struct work;
+ /* platform device, for workqueue handler */
+ struct platform_device *pdev;
};
struct push_switch_platform_info {
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
+#define TIF_FREEZE 19
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_WORK_MASK 0x000000FE /* work to do on interrupt/exception return */
#define _TIF_ALLWORK_MASK 0x000000FF /* work to do on any return to u-space */
struct page *page, unsigned long addr,
int len);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
static inline pgd_t *get_pgd_slow(void)
{
unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t));
- pgd_t *ret = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL);
+ pgd_t *ret = kmalloc(pgd_size, GFP_KERNEL);
return ret;
}
#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)()
#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_dup_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end)
#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr)
#define flush_icache_range(start, end) do { } while (0)
#endif
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ cc_t _x_cc[2]; /* We need them to hold vmin/vtime */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
/* These are the same regardless of whether this is an SMP kernel or not. */
#define flush_cache_mm(__mm) \
do { if ((__mm) == current->mm) flushw_user(); } while(0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
#define flush_cache_range(vma, start, end) \
flush_cache_mm((vma)->vm_mm)
#define flush_cache_page(vma, page, pfn) \
#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs) (((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs) (((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
-#define DMA_WRITE_P(regs) (((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
+#define DMA_ERROR_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs) ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
+#define DMA_WRITE_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
#define DMA_OFF(__regs) \
do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
tmp &= ~DMA_ENABLE; \
--- /dev/null
+/*
+ * include/asm-sparc64/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+ unsigned long flags;
+
+ __asm__ __volatile__(
+ "rdpr %%pil, %0"
+ : "=r" (flags)
+ );
+
+ return flags;
+}
+
+#define raw_local_save_flags(flags) \
+ do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+ __asm__ __volatile__(
+ "wrpr %0, %%pil"
+ : /* no output */
+ : "r" (flags)
+ : "memory"
+ );
+}
+
+static inline void raw_local_irq_disable(void)
+{
+ __asm__ __volatile__(
+ "wrpr 15, %%pil"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory"
+ );
+}
+
+static inline void raw_local_irq_enable(void)
+{
+ __asm__ __volatile__(
+ "wrpr 0, %%pil"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory"
+ );
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+ return (flags > 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+
+ return raw_irqs_disabled_flags(flags);
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+
+ raw_local_irq_disable();
+
+ return flags;
+}
+
+#define raw_local_irq_save(flags) \
+ do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)pentry
#define arch_remove_kprobe(p) do {} while (0)
#define ARCH_INACTIVE_KPROBE_COUNT 0
-#define flush_insn_slot(p) do { } while (0)
+
+#define flush_insn_slot(p) \
+do { flushi(&(p)->ainsn.insn[0]); \
+ flushi(&(p)->ainsn.insn[1]); \
+} while (0)
/* Architecture specific copy of original instruction*/
struct arch_specific_insn {
struct prev_kprobe {
struct kprobe *kp;
- unsigned int status;
+ unsigned long status;
unsigned long orig_tnpc;
unsigned long orig_tstate_pil;
};
unsigned long kprobe_status;
unsigned long kprobe_orig_tnpc;
unsigned long kprobe_orig_tstate_pil;
- long *jprobe_saved_esp;
struct pt_regs jprobe_saved_regs;
- struct pt_regs *jprobe_saved_regs_location;
- struct sparc_stackf jprobe_saved_stack;
struct prev_kprobe prev_kprobe;
};
signed int count;
spinlock_t wait_lock;
struct list_head wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ struct lockdep_map dep_map;
+#endif
};
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
#define __RWSEM_INITIALIZER(name) \
-{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) }
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
+ __RWSEM_DEP_MAP_INIT(name) }
#define DECLARE_RWSEM(name) \
struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-static __inline__ void init_rwsem(struct rw_semaphore *sem)
-{
- sem->count = RWSEM_UNLOCKED_VALUE;
- spin_lock_init(&sem->wait_lock);
- INIT_LIST_HEAD(&sem->wait_list);
-}
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+ struct lock_class_key *key);
+
+#define init_rwsem(sem) \
+do { \
+ static struct lock_class_key __key; \
+ \
+ __init_rwsem((sem), #sem, &__key); \
+} while (0)
extern void __down_read(struct rw_semaphore *sem);
extern int __down_read_trylock(struct rw_semaphore *sem);
extern void __up_write(struct rw_semaphore *sem);
extern void __downgrade_write(struct rw_semaphore *sem);
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+ __down_write(sem);
+}
+
static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
{
return atomic_add_return(delta, (atomic_t *)(&sem->count));
#include <asm/visasm.h>
#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+
/*
* Sparc (general) CPU types
*/
#endif
-#define setipl(__new_ipl) \
- __asm__ __volatile__("wrpr %0, %%pil" : : "r" (__new_ipl) : "memory")
-
-#define local_irq_disable() \
- __asm__ __volatile__("wrpr 15, %%pil" : : : "memory")
-
-#define local_irq_enable() \
- __asm__ __volatile__("wrpr 0, %%pil" : : : "memory")
-
-#define getipl() \
-({ unsigned long retval; __asm__ __volatile__("rdpr %%pil, %0" : "=r" (retval)); retval; })
-
-#define swap_pil(__new_pil) \
-({ unsigned long retval; \
- __asm__ __volatile__("rdpr %%pil, %0\n\t" \
- "wrpr %1, %%pil" \
- : "=&r" (retval) \
- : "r" (__new_pil) \
- : "memory"); \
- retval; \
-})
-
-#define read_pil_and_cli() \
-({ unsigned long retval; \
- __asm__ __volatile__("rdpr %%pil, %0\n\t" \
- "wrpr 15, %%pil" \
- : "=r" (retval) \
- : : "memory"); \
- retval; \
-})
-
-#define local_save_flags(flags) ((flags) = getipl())
-#define local_irq_save(flags) ((flags) = read_pil_and_cli())
-#define local_irq_restore(flags) setipl((flags))
-
-/* On sparc64 IRQ flags are the PIL register. A value of zero
- * means all interrupt levels are enabled, any other value means
- * only IRQ levels greater than that value will be received.
- * Consequently this means that the lowest IRQ level is one.
- */
-#define irqs_disabled() \
-({ unsigned long flags; \
- local_save_flags(flags);\
- (flags > 0); \
-})
-
#define nop() __asm__ __volatile__ ("nop")
#define read_barrier_depends() do { } while(0)
#endif
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ cc_t _x_cc[2]; /* We need them to hold vmin/vtime */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#endif
#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+#define TRAP_IRQ(routine, level) \
+ rdpr %pil, %g2; \
+ wrpr %g0, 15, %pil; \
+ sethi %hi(1f-4), %g7; \
+ ba,pt %xcc, etrap_irq; \
+ or %g7, %lo(1f-4), %g7; \
+ nop; \
+ nop; \
+ nop; \
+ .subsection 2; \
+1: call trace_hardirqs_off; \
+ nop; \
+ mov level, %o0; \
+ call routine; \
+ add %sp, PTREGS_OFF, %o1; \
+ ba,a,pt %xcc, rtrap_irq; \
+ .previous;
+
+#define TICK_SMP_IRQ \
+ rdpr %pil, %g2; \
+ wrpr %g0, 15, %pil; \
+ sethi %hi(1f-4), %g7; \
+ ba,pt %xcc, etrap_irq; \
+ or %g7, %lo(1f-4), %g7; \
+ nop; \
+ nop; \
+ nop; \
+ .subsection 2; \
+1: call trace_hardirqs_off; \
+ nop; \
+ call smp_percpu_timer_interrupt; \
+ add %sp, PTREGS_OFF, %o0; \
+ ba,a,pt %xcc, rtrap_irq; \
+ .previous;
+
+#else
+
#define TRAP_IRQ(routine, level) \
rdpr %pil, %g2; \
wrpr %g0, 15, %pil; \
- b,pt %xcc, etrap_irq; \
+ ba,pt %xcc, etrap_irq; \
rd %pc, %g7; \
mov level, %o0; \
call routine; \
rdpr %pil, %g2; \
wrpr %g0, 15, %pil; \
sethi %hi(109f), %g7; \
- b,pt %xcc, etrap_irq; \
+ ba,pt %xcc, etrap_irq; \
109: or %g7, %lo(109b), %g7; \
call smp_percpu_timer_interrupt; \
add %sp, PTREGS_OFF, %o0; \
ba,a,pt %xcc, rtrap_irq;
+#endif
+
#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
#ifndef __UM_BUG_H
#define __UM_BUG_H
-#include <asm-generic/bug.h>
+
+#include <asm/arch/bug.h>
+
#endif
systems with MMUs, so we don't need them. */
#define flush_cache_all() ((void)0)
#define flush_cache_mm(mm) ((void)0)
+#define flush_cache_dup_mm(mm) ((void)0)
#define flush_cache_range(vma, start, end) ((void)0)
#define flush_cache_page(vma, vmaddr, pfn) ((void)0)
#define flush_dcache_page(page) ((void)0)
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define ACPI_ENABLE_IRQS() local_irq_enable()
#define ACPI_FLUSH_CPU_CACHE() wbinvd()
-
-static inline int
-__acpi_acquire_global_lock (unsigned int *lock)
-{
- unsigned int old, new, val;
- do {
- old = *lock;
- new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
- val = cmpxchg(lock, old, new);
- } while (unlikely (val != old));
- return (new < 3) ? -1 : 0;
-}
-
-static inline int
-__acpi_release_global_lock (unsigned int *lock)
-{
- unsigned int old, new, val;
- do {
- old = *lock;
- new = old & ~0x3;
- val = cmpxchg(lock, old, new);
- } while (unlikely (val != old));
- return old & 0x1;
-}
+int __acpi_acquire_global_lock(unsigned int *lock);
+int __acpi_release_global_lock(unsigned int *lock);
#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr))
#ifndef __ASM_X8664_BUG_H
#define __ASM_X8664_BUG_H 1
-#include <linux/stringify.h>
-
-/*
- * Tell the user there is some problem. The exception handler decodes
- * this frame.
- */
-struct bug_frame {
- unsigned char ud2[2];
- unsigned char push;
- signed int filename;
- unsigned char ret;
- unsigned short line;
-} __attribute__((packed));
-
#ifdef CONFIG_BUG
#define HAVE_ARCH_BUG
-/* We turn the bug frame into valid instructions to not confuse
- the disassembler. Thanks to Jan Beulich & Suresh Siddha
- for nice instruction selection.
- The magic numbers generate mov $64bitimm,%eax ; ret $offset. */
-#define BUG() \
- asm volatile( \
- "ud2 ; pushq $%c1 ; ret $%c0" :: \
- "i"(__LINE__), "i" (__FILE__))
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define BUG() \
+ do { \
+ asm volatile("1:\tud2\n" \
+ ".pushsection __bug_table,\"a\"\n" \
+ "2:\t.quad 1b, %c0\n" \
+ "\t.word %c1, 0\n" \
+ "\t.org 2b+%c2\n" \
+ ".popsection" \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (sizeof(struct bug_entry))); \
+ for(;;) ; \
+ } while(0)
+#else
+#define BUG() \
+ do { \
+ asm volatile("ud2"); \
+ for(;;) ; \
+ } while(0)
+#endif
+
void out_of_line_bug(void);
#else
static inline void out_of_line_bug(void) { }
/* Caches aren't brain-dead on the intel. */
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
#define flush_dcache_page(page) do { } while (0)
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
#define MSR_IA32_PERFCTR0 0xc1
#define MSR_IA32_PERFCTR1 0xc2
+#define MSR_FSB_FREQ 0xcd
#define MSR_MTRRcap 0x0fe
#define MSR_IA32_BBL_CR_CTL 0x119
#define MSR_IA32_PERF_STATUS 0x198
#define MSR_IA32_PERF_CTL 0x199
+#define MSR_IA32_MPERF 0xE7
+#define MSR_IA32_APERF 0xE8
+
#define MSR_IA32_THERM_CONTROL 0x19a
#define MSR_IA32_THERM_INTERRUPT 0x19b
#define MSR_IA32_THERM_STATUS 0x19c
cc_t c_cc[NCCS]; /* control characters */
};
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#define VQUIT 1
#define HUPCL 0002000
#define CLOCAL 0004000
#define CBAUDEX 0010000
+#define BOTHER 0010000 /* non standard rate */
#define B57600 0010001
#define B115200 0010002
#define B230400 0010003
#define B3000000 0010015
#define B3500000 0010016
#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CIBAUD 002003600000 /* input baud rate */
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define IBSHIFT 8 /* Shift from CBAUD to CIBAUD */
+
/* c_lflag bits */
#define ISIG 0000001
#define ICANON 0000002
copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
})
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
#endif /* __KERNEL__ */
#define TIF_MEMDIE 20
#define TIF_DEBUG 21 /* uses debug registers */
#define TIF_IO_BITMAP 22 /* uses I/O bitmap */
+#define TIF_FREEZE 23 /* is freezing for suspend */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_DEBUG (1<<TIF_DEBUG)
#define _TIF_IO_BITMAP (1<<TIF_IO_BITMAP)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK \
.flags = SD_LOAD_BALANCE \
| SD_BALANCE_FORK \
| SD_BALANCE_EXEC \
+ | SD_SERIALIZE \
| SD_WAKE_BALANCE, \
.last_balance = jiffies, \
.balance_interval = 1, \
--- /dev/null
+/*
+ * include/asm-xtensa/asmmacro.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_ASMMACRO_H
+#define _XTENSA_ASMMACRO_H
+
+#include <asm/variant/core.h>
+
+/*
+ * Some little helpers for loops. Use zero-overhead-loops
+ * where applicable and if supported by the processor.
+ *
+ * __loopi ar, at, size, inc
+ * ar register initialized with the start address
+ * at scratch register used by macro
+ * size size immediate value
+ * inc increment
+ *
+ * __loops ar, as, at, inc_log2[, mask_log2][, cond][, ncond]
+ * ar register initialized with the start address
+ * as register initialized with the size
+ * at scratch register use by macro
+ * inc_log2 increment [in log2]
+ * mask_log2 mask [in log2]
+ * cond true condition (used in loop'cond')
+ * ncond false condition (used in b'ncond')
+ *
+ * __loop as
+ * restart loop. 'as' register must not have been modified!
+ *
+ * __endla ar, at, incr
+ * ar start address (modified)
+ * as scratch register used by macro
+ * inc increment
+ */
+
+/*
+ * loop for given size as immediate
+ */
+
+ .macro __loopi ar, at, size, incr
+
+#if XCHAL_HAVE_LOOPS
+ movi \at, ((\size + \incr - 1) / (\incr))
+ loop \at, 99f
+#else
+ addi \at, \ar, \size
+ 98:
+#endif
+
+ .endm
+
+/*
+ * loop for given size in register
+ */
+
+ .macro __loops ar, as, at, incr_log2, mask_log2, cond, ncond
+
+#if XCHAL_HAVE_LOOPS
+ .ifgt \incr_log2 - 1
+ addi \at, \as, (1 << \incr_log2) - 1
+ .ifnc \mask_log2,
+ extui \at, \at, \incr_log2, \mask_log2
+ .else
+ srli \at, \at, \incr_log2
+ .endif
+ .endif
+ loop\cond \at, 99f
+#else
+ .ifnc \mask_log2,
+ extui \at, \as, \incr_log2, \mask_log2
+ .else
+ .ifnc \ncond,
+ srli \at, \as, \incr_log2
+ .endif
+ .endif
+ .ifnc \ncond,
+ b\ncond \at, 99f
+
+ .endif
+ .ifnc \mask_log2,
+ slli \at, \at, \incr_log2
+ add \at, \ar, \at
+ .else
+ add \at, \ar, \as
+ .endif
+#endif
+ 98:
+
+ .endm
+
+/*
+ * loop from ar to ax
+ */
+
+ .macro __loopt ar, as, at, incr_log2
+
+#if XCHAL_HAVE_LOOPS
+ sub \at, \as, \ar
+ .ifgt \incr_log2 - 1
+ addi \at, \at, (1 << \incr_log2) - 1
+ srli \at, \at, \incr_log2
+ .endif
+ loop \at, 99f
+#else
+ 98:
+#endif
+
+ .endm
+
+/*
+ * restart loop. registers must be unchanged
+ */
+
+ .macro __loop as
+
+#if XCHAL_HAVE_LOOPS
+ loop \as, 99f
+#else
+ 98:
+#endif
+
+ .endm
+
+/*
+ * end of loop with no increment of the address.
+ */
+
+ .macro __endl ar, as
+#if !XCHAL_HAVE_LOOPS
+ bltu \ar, \as, 98b
+#endif
+ 99:
+ .endm
+
+/*
+ * end of loop with increment of the address.
+ */
+
+ .macro __endla ar, as, incr
+ addi \ar, \ar, \incr
+ __endl \ar \as
+ .endm
+
+
+#endif /* _XTENSA_ASMMACRO_H */
#ifndef _XTENSA_BUG_H
#define _XTENSA_BUG_H
-#include <linux/stringify.h>
-
-#define ILL __asm__ __volatile__ (".byte 0,0,0\n")
-
-#ifdef CONFIG_KALLSYMS
-# define BUG() do { \
- printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
- ILL; \
-} while (0)
-#else
-# define BUG() do { \
- printk("kernel BUG!\n"); \
- ILL; \
-} while (0)
-#endif
-
-#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
-#define PAGE_BUG(page) do { BUG(); } while (0)
-#define WARN_ON(condition) do { \
- if (unlikely((condition)!=0)) { \
- printk ("Warning in %s at %s:%d\n", __FUNCTION__, __FILE__, __LINE__); \
- dump_stack(); \
- } \
-} while (0)
+#include <asm-generic/bug.h>
#endif /* _XTENSA_BUG_H */
#ifndef _XTENSA_BYTEORDER_H
#define _XTENSA_BYTEORDER_H
-#include <asm/processor.h>
#include <asm/types.h>
-static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
{
__u32 res;
/* instruction sequence from Xtensa ISA release 2/2000 */
return res;
}
-static __inline__ __const__ __u16 ___arch__swab16(__u16 x)
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
{
/* Given that 'short' values are signed (i.e., can be negative),
* we cannot assume that the upper 16-bits of the register are
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
- * 2 of the License, or (at your option) any later version.
*
* (C) 2001 - 2005 Tensilica Inc.
*/
#ifndef _XTENSA_CACHE_H
#define _XTENSA_CACHE_H
-#include <xtensa/config/core.h>
+#include <asm/variant/core.h>
-#if XCHAL_ICACHE_SIZE > 0
-# if (XCHAL_ICACHE_SIZE % (XCHAL_ICACHE_LINESIZE*XCHAL_ICACHE_WAYS*4)) != 0
-# error cache configuration outside expected/supported range!
-# endif
-#endif
+#define L1_CACHE_SHIFT XCHAL_DCACHE_LINEWIDTH
+#define L1_CACHE_BYTES XCHAL_DCACHE_LINESIZE
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#if XCHAL_DCACHE_SIZE > 0
-# if (XCHAL_DCACHE_SIZE % (XCHAL_DCACHE_LINESIZE*XCHAL_DCACHE_WAYS*4)) != 0
-# error cache configuration outside expected/supported range!
-# endif
-#endif
+#define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE/XCHAL_DCACHE_WAYS)
+#define ICACHE_WAY_SIZE (XCHAL_ICACHE_SIZE/XCHAL_ICACHE_WAYS)
-#define L1_CACHE_SHIFT XCHAL_CACHE_LINEWIDTH_MAX
-#define L1_CACHE_BYTES XCHAL_CACHE_LINESIZE_MAX
#endif /* _XTENSA_CACHE_H */
--- /dev/null
+/*
+ * include/asm-xtensa/cacheasm.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Tensilica Inc.
+ */
+
+#include <asm/cache.h>
+#include <asm/asmmacro.h>
+#include <linux/stringify.h>
+
+/*
+ * Define cache functions as macros here so that they can be used
+ * by the kernel and boot loader. We should consider moving them to a
+ * library that can be linked by both.
+ *
+ * Locking
+ *
+ * ___unlock_dcache_all
+ * ___unlock_icache_all
+ *
+ * Flush and invaldating
+ *
+ * ___flush_invalidate_dcache_{all|range|page}
+ * ___flush_dcache_{all|range|page}
+ * ___invalidate_dcache_{all|range|page}
+ * ___invalidate_icache_{all|range|page}
+ *
+ */
+
+ .macro __loop_cache_all ar at insn size line_width
+
+ movi \ar, 0
+
+ __loopi \ar, \at, \size, (4 << (\line_width))
+ \insn \ar, 0 << (\line_width)
+ \insn \ar, 1 << (\line_width)
+ \insn \ar, 2 << (\line_width)
+ \insn \ar, 3 << (\line_width)
+ __endla \ar, \at, 4 << (\line_width)
+
+ .endm
+
+
+ .macro __loop_cache_range ar as at insn line_width
+
+ extui \at, \ar, 0, \line_width
+ add \as, \as, \at
+
+ __loops \ar, \as, \at, \line_width
+ \insn \ar, 0
+ __endla \ar, \at, (1 << (\line_width))
+
+ .endm
+
+
+ .macro __loop_cache_page ar at insn line_width
+
+ __loopi \ar, \at, PAGE_SIZE, 4 << (\line_width)
+ \insn \ar, 0 << (\line_width)
+ \insn \ar, 1 << (\line_width)
+ \insn \ar, 2 << (\line_width)
+ \insn \ar, 3 << (\line_width)
+ __endla \ar, \at, 4 << (\line_width)
+
+ .endm
+
+
+#if XCHAL_DCACHE_LINE_LOCKABLE
+
+ .macro ___unlock_dcache_all ar at
+
+ __loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+#endif
+
+#if XCHAL_ICACHE_LINE_LOCKABLE
+
+ .macro ___unlock_icache_all ar at
+
+ __loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH
+
+ .endm
+#endif
+
+ .macro ___flush_invalidate_dcache_all ar at
+
+ __loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+
+ .macro ___flush_dcache_all ar at
+
+ __loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+
+ .macro ___invalidate_dcache_all ar at
+
+ __loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \
+ XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+
+ .macro ___invalidate_icache_all ar at
+
+ __loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \
+ XCHAL_ICACHE_LINEWIDTH
+
+ .endm
+
+
+
+ .macro ___flush_invalidate_dcache_range ar as at
+
+ __loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+
+ .macro ___flush_dcache_range ar as at
+
+ __loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+
+ .macro ___invalidate_dcache_range ar as at
+
+ __loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+
+ .macro ___invalidate_icache_range ar as at
+
+ __loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH
+
+ .endm
+
+
+
+ .macro ___flush_invalidate_dcache_page ar as
+
+ __loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+
+ .macro ___flush_dcache_page ar as
+
+ __loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+
+ .macro ___invalidate_dcache_page ar as
+
+ __loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH
+
+ .endm
+
+
+ .macro ___invalidate_icache_page ar as
+
+ __loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH
+
+ .endm
+
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * (C) 2001 - 2005 Tensilica Inc.
+ * (C) 2001 - 2006 Tensilica Inc.
*/
#ifndef _XTENSA_CACHEFLUSH_H
#define flush_cache_all() __flush_invalidate_cache_all();
#define flush_cache_mm(mm) __flush_invalidate_cache_all();
+#define flush_cache_dup_mm(mm) __flush_invalidate_cache_all();
#define flush_cache_vmap(start,end) __flush_invalidate_cache_all();
#define flush_cache_vunmap(start,end) __flush_invalidate_cache_all();
#define flush_cache_all() do { } while (0)
#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
#define flush_cache_vmap(start,end) do { } while (0)
#define flush_cache_vunmap(start,end) do { } while (0)
#define _XTENSA_CHECKSUM_H
#include <linux/in6.h>
-#include <xtensa/config/core.h>
+#include <asm/variant/core.h>
/*
* computes the checksum of a memory block at buff, length len,
#ifndef _XTENSA_COPROCESSOR_H
#define _XTENSA_COPROCESSOR_H
-#include <xtensa/config/core.h>
+#include <asm/variant/core.h>
+#include <asm/variant/tie.h>
+
+#if !XCHAL_HAVE_CP
+
+#define XTENSA_CP_EXTRA_OFFSET 0
+#define XTENSA_CP_EXTRA_ALIGN 1 /* must be a power of 2 */
+#define XTENSA_CP_EXTRA_SIZE 0
+
+#else
#define XTOFS(last_start,last_size,align) \
((last_start+last_size+align-1) & -align)
# endif
#endif
+#endif
+
#endif /* _XTENSA_COPROCESSOR_H */
#define _XTENSA_DMA_H
#include <asm/io.h> /* need byte IO */
-#include <xtensa/config/core.h>
/*
* This is only to be defined if we have PC-like DMA.
* enters another area, and virt_to_phys() may not return
* the value desired).
*/
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KSEG_CACHED_SIZE - 1)
+
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KIO_SIZE - 1)
+
/* Reserve and release a DMA channel */
extern int request_dma(unsigned int dmanr, const char * device_id);
#ifndef _XTENSA_ELF_H
#define _XTENSA_ELF_H
+#include <asm/variant/core.h>
#include <asm/ptrace.h>
-#include <asm/coprocessor.h>
-#include <xtensa/config/core.h>
/* Xtensa processor ELF architecture-magic number */
* using memcpy(). But we do allow space for such alignment,
* to allow optimizations of layout and copying.
*/
-
+#if 0
#define TOTAL_FPREGS_SIZE \
(4 + XTENSA_CPE_LTABLE_SIZE + XTENSA_CP_EXTRA_SIZE)
#define ELF_NFPREG \
((TOTAL_FPREGS_SIZE + sizeof(elf_fpreg_t) - 1) / sizeof(elf_fpreg_t))
+#else
+#define TOTAL_FPREGS_SIZE 0
+#define ELF_NFPREG 0
+#endif
typedef unsigned int elf_fpreg_t;
typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
located on an ext2 file system */
-#define O_APPEND 0x0008
-#define O_SYNC 0x0010
-#define O_NONBLOCK 0x0080
-#define O_CREAT 0x0100 /* not fcntl */
-#define O_EXCL 0x0400 /* not fcntl */
-#define O_NOCTTY 0x0800 /* not fcntl */
-#define FASYNC 0x1000 /* fcntl, for BSD compatibility */
-#define O_LARGEFILE 0x2000 /* allow large file opens - currently ignored */
-#define O_DIRECT 0x8000 /* direct disk access hint - currently ignored*/
-#define O_NOATIME 0x100000
-
-#define F_GETLK 14
-#define F_GETLK64 15
+#define O_ACCMODE 0003
+#define O_RDONLY 00
+#define O_WRONLY 01
+#define O_RDWR 02
+#define O_CREAT 0100 /* not fcntl */
+#define O_EXCL 0200 /* not fcntl */
+#define O_NOCTTY 0400 /* not fcntl */
+#define O_TRUNC 01000 /* not fcntl */
+#define O_APPEND 02000
+#define O_NONBLOCK 04000
+#define O_NDELAY O_NONBLOCK
+#define O_SYNC 010000
+#define FASYNC 020000 /* fcntl, for BSD compatibility */
+#define O_DIRECT 040000 /* direct disk access hint */
+#define O_LARGEFILE 0100000
+#define O_DIRECTORY 0200000 /* must be a directory */
+#define O_NOFOLLOW 0400000 /* don't follow links */
+#define O_NOATIME 01000000
+
+#define F_DUPFD 0 /* dup */
+#define F_GETFD 1 /* get close_on_exec */
+#define F_SETFD 2 /* set/clear close_on_exec */
+#define F_GETFL 3 /* get file->f_flags */
+#define F_SETFL 4 /* set file->f_flags */
+#define F_GETLK 5
#define F_SETLK 6
#define F_SETLKW 7
-#define F_SETLK64 16
-#define F_SETLKW64 17
-#define F_SETOWN 24 /* for sockets. */
-#define F_GETOWN 23 /* for sockets. */
+#define F_SETOWN 8 /* for sockets. */
+#define F_GETOWN 9 /* for sockets. */
+#define F_SETSIG 10 /* for sockets. */
+#define F_GETSIG 11 /* for sockets. */
+
+#define F_GETLK64 12 /* using 'struct flock64' */
+#define F_SETLK64 13
+#define F_SETLKW64 14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK 0
+#define F_WRLCK 1
+#define F_UNLCK 2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK 4 /* or 3 */
+#define F_SHLCK 8 /* or 4 */
-typedef struct flock {
+/* for leases */
+#define F_INPROGRESS 16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH 1 /* shared lock */
+#define LOCK_EX 2 /* exclusive lock */
+#define LOCK_NB 4 /* or'd with one of the above to prevent
+ blocking */
+#define LOCK_UN 8 /* remove lock */
+
+#define LOCK_MAND 32 /* This is a mandatory flock */
+#define LOCK_READ 64 /* ... Which allows concurrent read operations */
+#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */
+#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */
+
+struct flock {
short l_type;
short l_whence;
- __kernel_off_t l_start;
- __kernel_off_t l_len;
- long l_sysid;
- __kernel_pid_t l_pid;
- long pad[4];
-} flock_t;
+ off_t l_start;
+ off_t l_len;
+ pid_t l_pid;
+};
struct flock64 {
short l_type;
short l_whence;
- __kernel_off_t l_start;
- __kernel_off_t l_len;
+ loff_t l_start;
+ loff_t l_len;
pid_t l_pid;
};
-#define HAVE_ARCH_STRUCT_FLOCK
-#define HAVE_ARCH_STRUCT_FLOCK64
-
-#include <asm-generic/fcntl.h>
+#define F_LINUX_SPECIFIC_BASE 1024
#endif /* _XTENSA_FCNTL_H */
+++ /dev/null
-/*
- * include/asm-xtensa/fixmap.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_FIXMAP_H
-#define _XTENSA_FIXMAP_H
-
-#include <asm/processor.h>
-
-#ifdef CONFIG_MMU
-
-/*
- * Here we define all the compile-time virtual addresses.
- */
-
-#if XCHAL_SEG_MAPPABLE_VADDR != 0
-# error "Current port requires virtual user space starting at 0"
-#endif
-#if XCHAL_SEG_MAPPABLE_SIZE < 0x80000000
-# error "Current port requires at least 0x8000000 bytes for user space"
-#endif
-
-/* Verify instruction/data ram/rom and xlmi don't overlay vmalloc space. */
-
-#define __IN_VMALLOC(addr) \
- (((addr) >= VMALLOC_START) && ((addr) < VMALLOC_END))
-#define __SPAN_VMALLOC(start,end) \
- (((start) < VMALLOC_START) && ((end) >= VMALLOC_END))
-#define INSIDE_VMALLOC(start,end) \
- (__IN_VMALLOC((start)) || __IN_VMALLOC(end) || __SPAN_VMALLOC((start),(end)))
-
-#if XCHAL_NUM_INSTROM
-# if XCHAL_NUM_INSTROM == 1
-# if INSIDE_VMALLOC(XCHAL_INSTROM0_VADDR,XCHAL_INSTROM0_VADDR+XCHAL_INSTROM0_SIZE)
-# error vmalloc range conflicts with instrom0
-# endif
-# endif
-# if XCHAL_NUM_INSTROM == 2
-# if INSIDE_VMALLOC(XCHAL_INSTROM1_VADDR,XCHAL_INSTROM1_VADDR+XCHAL_INSTROM1_SIZE)
-# error vmalloc range conflicts with instrom1
-# endif
-# endif
-#endif
-
-#if XCHAL_NUM_INSTRAM
-# if XCHAL_NUM_INSTRAM == 1
-# if INSIDE_VMALLOC(XCHAL_INSTRAM0_VADDR,XCHAL_INSTRAM0_VADDR+XCHAL_INSTRAM0_SIZE)
-# error vmalloc range conflicts with instram0
-# endif
-# endif
-# if XCHAL_NUM_INSTRAM == 2
-# if INSIDE_VMALLOC(XCHAL_INSTRAM1_VADDR,XCHAL_INSTRAM1_VADDR+XCHAL_INSTRAM1_SIZE)
-# error vmalloc range conflicts with instram1
-# endif
-# endif
-#endif
-
-#if XCHAL_NUM_DATAROM
-# if XCHAL_NUM_DATAROM == 1
-# if INSIDE_VMALLOC(XCHAL_DATAROM0_VADDR,XCHAL_DATAROM0_VADDR+XCHAL_DATAROM0_SIZE)
-# error vmalloc range conflicts with datarom0
-# endif
-# endif
-# if XCHAL_NUM_DATAROM == 2
-# if INSIDE_VMALLOC(XCHAL_DATAROM1_VADDR,XCHAL_DATAROM1_VADDR+XCHAL_DATAROM1_SIZE)
-# error vmalloc range conflicts with datarom1
-# endif
-# endif
-#endif
-
-#if XCHAL_NUM_DATARAM
-# if XCHAL_NUM_DATARAM == 1
-# if INSIDE_VMALLOC(XCHAL_DATARAM0_VADDR,XCHAL_DATARAM0_VADDR+XCHAL_DATARAM0_SIZE)
-# error vmalloc range conflicts with dataram0
-# endif
-# endif
-# if XCHAL_NUM_DATARAM == 2
-# if INSIDE_VMALLOC(XCHAL_DATARAM1_VADDR,XCHAL_DATARAM1_VADDR+XCHAL_DATARAM1_SIZE)
-# error vmalloc range conflicts with dataram1
-# endif
-# endif
-#endif
-
-#if XCHAL_NUM_XLMI
-# if XCHAL_NUM_XLMI == 1
-# if INSIDE_VMALLOC(XCHAL_XLMI0_VADDR,XCHAL_XLMI0_VADDR+XCHAL_XLMI0_SIZE)
-# error vmalloc range conflicts with xlmi0
-# endif
-# endif
-# if XCHAL_NUM_XLMI == 2
-# if INSIDE_VMALLOC(XCHAL_XLMI1_VADDR,XCHAL_XLMI1_VADDR+XCHAL_XLMI1_SIZE)
-# error vmalloc range conflicts with xlmi1
-# endif
-# endif
-#endif
-
-#if (XCHAL_NUM_INSTROM > 2) || \
- (XCHAL_NUM_INSTRAM > 2) || \
- (XCHAL_NUM_DATARAM > 2) || \
- (XCHAL_NUM_DATAROM > 2) || \
- (XCHAL_NUM_XLMI > 2)
-# error Insufficient checks on vmalloc above for more than 2 devices
-#endif
-
-/*
- * USER_VM_SIZE does not necessarily equal TASK_SIZE. We bumped
- * TASK_SIZE down to 0x4000000 to simplify the handling of windowed
- * call instructions (currently limited to a range of 1 GByte). User
- * tasks may very well reclaim the VM space from 0x40000000 to
- * 0x7fffffff in the future, so we do not want the kernel becoming
- * accustomed to having any of its stuff (e.g., page tables) in this
- * region. This VM region is no-man's land for now.
- */
-
-#define USER_VM_START XCHAL_SEG_MAPPABLE_VADDR
-#define USER_VM_SIZE 0x80000000
-
-/* Size of page table: */
-
-#define PGTABLE_SIZE_BITS (32 - XCHAL_MMU_MIN_PTE_PAGE_SIZE + 2)
-#define PGTABLE_SIZE (1L << PGTABLE_SIZE_BITS)
-
-/* All kernel-mappable space: */
-
-#define KERNEL_ALLMAP_START (USER_VM_START + USER_VM_SIZE)
-#define KERNEL_ALLMAP_SIZE (XCHAL_SEG_MAPPABLE_SIZE - KERNEL_ALLMAP_START)
-
-/* Carve out page table at start of kernel-mappable area: */
-
-#if KERNEL_ALLMAP_SIZE < PGTABLE_SIZE
-#error "Gimme some space for page table!"
-#endif
-#define PGTABLE_START KERNEL_ALLMAP_START
-
-/* Remaining kernel-mappable space: */
-
-#define KERNEL_MAPPED_START (KERNEL_ALLMAP_START + PGTABLE_SIZE)
-#define KERNEL_MAPPED_SIZE (KERNEL_ALLMAP_SIZE - PGTABLE_SIZE)
-
-#if KERNEL_MAPPED_SIZE < 0x01000000 /* 16 MB is arbitrary for now */
-# error "Shouldn't the kernel have at least *some* mappable space?"
-#endif
-
-#define MAX_LOW_MEMORY XCHAL_KSEG_CACHED_SIZE
-
-#endif
-
-/*
- * Some constants used elsewhere, but perhaps only in Xtensa header
- * files, so maybe we can get rid of some and access compile-time HAL
- * directly...
- *
- * Note: We assume that system RAM is located at the very start of the
- * kernel segments !!
- */
-#define KERNEL_VM_LOW XCHAL_KSEG_CACHED_VADDR
-#define KERNEL_VM_HIGH XCHAL_KSEG_BYPASS_VADDR
-#define KERNEL_SPACE XCHAL_KSEG_CACHED_VADDR
-
-/*
- * Returns the physical/virtual addresses of the kernel space
- * (works with the cached kernel segment only, which is the
- * one normally used for kernel operation).
- */
-
-/* PHYSICAL BYPASS CACHED
- *
- * bypass vaddr bypass paddr * cached vaddr
- * cached vaddr cached paddr bypass vaddr *
- * bypass paddr * bypass vaddr cached vaddr
- * cached paddr * bypass vaddr cached vaddr
- * other * * *
- */
-
-#define PHYSADDR(a) \
-(((unsigned)(a) >= XCHAL_KSEG_BYPASS_VADDR \
- && (unsigned)(a) < XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_BYPASS_SIZE) ? \
- (unsigned)(a) - XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_BYPASS_PADDR : \
- ((unsigned)(a) >= XCHAL_KSEG_CACHED_VADDR \
- && (unsigned)(a) < XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_CACHED_SIZE) ? \
- (unsigned)(a) - XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_CACHED_PADDR : \
- (unsigned)(a))
-
-#define BYPASS_ADDR(a) \
-(((unsigned)(a) >= XCHAL_KSEG_BYPASS_PADDR \
- && (unsigned)(a) < XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_SIZE) ? \
- (unsigned)(a) - XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_VADDR : \
- ((unsigned)(a) >= XCHAL_KSEG_CACHED_PADDR \
- && (unsigned)(a) < XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_SIZE) ? \
- (unsigned)(a) - XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_BYPASS_VADDR : \
- ((unsigned)(a) >= XCHAL_KSEG_CACHED_VADDR \
- && (unsigned)(a) < XCHAL_KSEG_CACHED_VADDR+XCHAL_KSEG_CACHED_SIZE)? \
- (unsigned)(a) - XCHAL_KSEG_CACHED_VADDR+XCHAL_KSEG_BYPASS_VADDR: \
- (unsigned)(a))
-
-#define CACHED_ADDR(a) \
-(((unsigned)(a) >= XCHAL_KSEG_BYPASS_PADDR \
- && (unsigned)(a) < XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_SIZE) ? \
- (unsigned)(a) - XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_CACHED_VADDR : \
- ((unsigned)(a) >= XCHAL_KSEG_CACHED_PADDR \
- && (unsigned)(a) < XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_SIZE) ? \
- (unsigned)(a) - XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_VADDR : \
- ((unsigned)(a) >= XCHAL_KSEG_BYPASS_VADDR \
- && (unsigned)(a) < XCHAL_KSEG_BYPASS_VADDR+XCHAL_KSEG_BYPASS_SIZE) ? \
- (unsigned)(a) - XCHAL_KSEG_BYPASS_VADDR+XCHAL_KSEG_CACHED_VADDR : \
- (unsigned)(a))
-
-#define PHYSADDR_IO(a) \
-(((unsigned)(a) >= XCHAL_KIO_BYPASS_VADDR \
- && (unsigned)(a) < XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_SIZE) ? \
- (unsigned)(a) - XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_PADDR : \
- ((unsigned)(a) >= XCHAL_KIO_CACHED_VADDR \
- && (unsigned)(a) < XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_SIZE) ? \
- (unsigned)(a) - XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_PADDR : \
- (unsigned)(a))
-
-#define BYPASS_ADDR_IO(a) \
-(((unsigned)(a) >= XCHAL_KIO_BYPASS_PADDR \
- && (unsigned)(a) < XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_SIZE) ? \
- (unsigned)(a) - XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_VADDR : \
- ((unsigned)(a) >= XCHAL_KIO_CACHED_PADDR \
- && (unsigned)(a) < XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_SIZE) ? \
- (unsigned)(a) - XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_BYPASS_VADDR : \
- ((unsigned)(a) >= XCHAL_KIO_CACHED_VADDR \
- && (unsigned)(a) < XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_SIZE) ? \
- (unsigned)(a) - XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_BYPASS_VADDR : \
- (unsigned)(a))
-
-#define CACHED_ADDR_IO(a) \
-(((unsigned)(a) >= XCHAL_KIO_BYPASS_PADDR \
- && (unsigned)(a) < XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_SIZE) ? \
- (unsigned)(a) - XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_CACHED_VADDR : \
- ((unsigned)(a) >= XCHAL_KIO_CACHED_PADDR \
- && (unsigned)(a) < XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_SIZE) ? \
- (unsigned)(a) - XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_VADDR : \
- ((unsigned)(a) >= XCHAL_KIO_BYPASS_VADDR \
- && (unsigned)(a) < XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_SIZE) ? \
- (unsigned)(a) - XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_CACHED_VADDR : \
- (unsigned)(a))
-
-#endif /* _XTENSA_ADDRSPACE_H */
-
-
-
-
-
/*
- * linux/include/asm-xtensa/io.h
+ * include/asm-xtensa/io.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <asm/byteorder.h>
#include <linux/types.h>
-#include <asm/fixmap.h>
-
-#define _IO_BASE 0
+#define XCHAL_KIO_CACHED_VADDR 0xf0000000
+#define XCHAL_KIO_BYPASS_VADDR 0xf8000000
+#define XCHAL_KIO_PADDR 0xf0000000
+#define XCHAL_KIO_SIZE 0x08000000
/*
* swap functions to change byte order from little-endian to big-endian and
static inline unsigned long virt_to_phys(volatile void * address)
{
- return PHYSADDR((unsigned long)address);
+ return __pa(address);
}
static inline void * phys_to_virt(unsigned long address)
{
- return (void*) CACHED_ADDR(address);
+ return __va(address);
}
/*
- * IO bus memory addresses are also 1:1 with the physical address
+ * virt_to_bus and bus_to_virt are deprecated.
*/
-static inline unsigned long virt_to_bus(volatile void * address)
-{
- return PHYSADDR((unsigned long)address);
-}
-
-static inline void * bus_to_virt (unsigned long address)
-{
- return (void *) CACHED_ADDR(address);
-}
+#define virt_to_bus(x) virt_to_phys(x)
+#define bus_to_virt(x) phys_to_virt(x)
/*
- * Change "struct page" to physical address.
+ * Return the virtual (cached) address for the specified bus memory.
+ * Note that we currently don't support any address outside the KIO segment.
*/
static inline void *ioremap(unsigned long offset, unsigned long size)
{
- return (void *) CACHED_ADDR_IO(offset);
+ if (offset >= XCHAL_KIO_PADDR
+ && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE)
+ return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_BYPASS_VADDR);
+
+ else
+ BUG();
}
static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
{
- return (void *) BYPASS_ADDR_IO(offset);
+ if (offset >= XCHAL_KIO_PADDR
+ && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE)
+ return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_CACHED_VADDR);
+ else
+ BUG();
}
static inline void iounmap(void *addr)
*(__force volatile __u32 *)(addr) = b;
}
-
-
-
/* These are the definitions for the x86 IO instructions
* inb/inw/inl/outb/outw/outl, the "string" versions
* insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
* The macros don't do byte-swapping.
*/
-#define inb(port) readb((u8 *)((port)+_IO_BASE))
-#define outb(val, port) writeb((val),(u8 *)((unsigned long)(port)+_IO_BASE))
-#define inw(port) readw((u16 *)((port)+_IO_BASE))
-#define outw(val, port) writew((val),(u16 *)((unsigned long)(port)+_IO_BASE))
-#define inl(port) readl((u32 *)((port)+_IO_BASE))
+#define inb(port) readb((u8 *)((port)))
+#define outb(val, port) writeb((val),(u8 *)((unsigned long)(port)))
+#define inw(port) readw((u16 *)((port)))
+#define outw(val, port) writew((val),(u16 *)((unsigned long)(port)))
+#define inl(port) readl((u32 *)((port)))
#define outl(val, port) writel((val),(u32 *)((unsigned long)(port)))
#define inb_p(port) inb((port))
/*
- * * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * * access
- * */
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem access
+ */
#define xlate_dev_mem_ptr(p) __va(p)
/*
- * * Convert a virtual cached pointer to an uncached pointer
- * */
+ * Convert a virtual cached pointer to an uncached pointer
+ */
#define xlate_dev_kmem_ptr(p) p
#define _XTENSA_IRQ_H
#include <asm/platform/hardware.h>
-
-#include <xtensa/config/core.h>
+#include <asm/variant/core.h>
#ifndef PLATFORM_NR_IRQS
# define PLATFORM_NR_IRQS 0
}
struct irqaction;
-#if 0 // FIXME
-extern void disable_irq_nosync(unsigned int);
-extern void disable_irq(unsigned int);
-extern void enable_irq(unsigned int);
-#endif
#endif /* _XTENSA_IRQ_H */
--- /dev/null
+#include <asm-generic/irq_regs.h>
#include <linux/stringify.h>
#include <asm/pgtable.h>
-#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
-/*
- * Linux was ported to Xtensa assuming all auto-refill ways in set 0
- * had the same properties (a very likely assumption). Multiple sets
- * of auto-refill ways will still work properly, but not as optimally
- * as the Xtensa designer may have assumed.
- *
- * We make this case a hard #error, killing the kernel build, to alert
- * the developer to this condition (which is more likely an error).
- * You super-duper clever developers can change it to a warning or
- * remove it altogether if you think you know what you're doing. :)
- */
+#define XCHAL_MMU_ASID_BITS 8
#if (XCHAL_HAVE_TLBS != 1)
# error "Linux must have an MMU!"
#endif
-#if ((XCHAL_ITLB_ARF_WAYS == 0) || (XCHAL_DTLB_ARF_WAYS == 0))
-# error "MMU must have auto-refill ways"
-#endif
-
-#if ((XCHAL_ITLB_ARF_SETS != 1) || (XCHAL_DTLB_ARF_SETS != 1))
-# error Linux may not use all auto-refill ways as efficiently as you think
-#endif
-
-#if (XCHAL_MMU_MAX_PTE_PAGE_SIZE != XCHAL_MMU_MIN_PTE_PAGE_SIZE)
-# error Only one page size allowed!
-#endif
-
extern unsigned long asid_cache;
-extern pgd_t *current_pgd;
-
-/*
- * Define the number of entries per auto-refill way in set 0 of both I and D
- * TLBs. We deal only with set 0 here (an assumption further explained in
- * assertions.h). Also, define the total number of ARF entries in both TLBs.
- */
-
-#define ITLB_ENTRIES_PER_ARF_WAY (XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES))
-#define DTLB_ENTRIES_PER_ARF_WAY (XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,ENTRIES))
-
-#define ITLB_ENTRIES \
- (ITLB_ENTRIES_PER_ARF_WAY * (XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,WAYS)))
-#define DTLB_ENTRIES \
- (DTLB_ENTRIES_PER_ARF_WAY * (XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,WAYS)))
-
-
-/*
- * SMALLEST_NTLB_ENTRIES is the smaller of ITLB_ENTRIES and DTLB_ENTRIES.
- * In practice, they are probably equal. This macro simplifies function
- * flush_tlb_range().
- */
-
-#if (DTLB_ENTRIES < ITLB_ENTRIES)
-# define SMALLEST_NTLB_ENTRIES DTLB_ENTRIES
-#else
-# define SMALLEST_NTLB_ENTRIES ITLB_ENTRIES
-#endif
-
-
-/*
- * asid_cache tracks only the ASID[USER_RING] field of the RASID special
- * register, which is the current user-task asid allocation value.
- * mm->context has the same meaning. When it comes time to write the
- * asid_cache or mm->context values to the RASID special register, we first
- * shift the value left by 8, then insert the value.
- * ASID[0] always contains the kernel's asid value, and we reserve three
- * other asid values that we never assign to user tasks.
- */
-
-#define ASID_INC 0x1
-#define ASID_MASK ((1 << XCHAL_MMU_ASID_BITS) - 1)
-
-/*
- * XCHAL_MMU_ASID_INVALID is a configurable Xtensa processor constant
- * indicating invalid address space. XCHAL_MMU_ASID_KERNEL is a configurable
- * Xtensa processor constant indicating the kernel address space. They can
- * be arbitrary values.
- *
- * We identify three more unique, reserved ASID values to use in the unused
- * ring positions. No other user process will be assigned these reserved
- * ASID values.
- *
- * For example, given that
- *
- * XCHAL_MMU_ASID_INVALID == 0
- * XCHAL_MMU_ASID_KERNEL == 1
- *
- * the following maze of #if statements would generate
- *
- * ASID_RESERVED_1 == 2
- * ASID_RESERVED_2 == 3
- * ASID_RESERVED_3 == 4
- * ASID_FIRST_NONRESERVED == 5
- */
-
-#if (XCHAL_MMU_ASID_INVALID != XCHAL_MMU_ASID_KERNEL + 1)
-# define ASID_RESERVED_1 ((XCHAL_MMU_ASID_KERNEL + 1) & ASID_MASK)
-#else
-# define ASID_RESERVED_1 ((XCHAL_MMU_ASID_KERNEL + 2) & ASID_MASK)
-#endif
-
-#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_1 + 1)
-# define ASID_RESERVED_2 ((ASID_RESERVED_1 + 1) & ASID_MASK)
-#else
-# define ASID_RESERVED_2 ((ASID_RESERVED_1 + 2) & ASID_MASK)
-#endif
-
-#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_2 + 1)
-# define ASID_RESERVED_3 ((ASID_RESERVED_2 + 1) & ASID_MASK)
-#else
-# define ASID_RESERVED_3 ((ASID_RESERVED_2 + 2) & ASID_MASK)
-#endif
-
-#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_3 + 1)
-# define ASID_FIRST_NONRESERVED ((ASID_RESERVED_3 + 1) & ASID_MASK)
-#else
-# define ASID_FIRST_NONRESERVED ((ASID_RESERVED_3 + 2) & ASID_MASK)
-#endif
-
-#define ASID_ALL_RESERVED ( ((ASID_RESERVED_1) << 24) + \
- ((ASID_RESERVED_2) << 16) + \
- ((ASID_RESERVED_3) << 8) + \
- ((XCHAL_MMU_ASID_KERNEL)) )
-
/*
* NO_CONTEXT is the invalid ASID value that we don't ever assign to
- * any user or kernel context. NO_CONTEXT is a better mnemonic than
- * XCHAL_MMU_ASID_INVALID, so we use it in code instead.
- */
-
-#define NO_CONTEXT XCHAL_MMU_ASID_INVALID
-
-#if (KERNEL_RING != 0)
-# error The KERNEL_RING really should be zero.
-#endif
-
-#if (USER_RING >= XCHAL_MMU_RINGS)
-# error USER_RING cannot be greater than the highest numbered ring.
-#endif
-
-#if (USER_RING == KERNEL_RING)
-# error The user and kernel rings really should not be equal.
-#endif
-
-#if (USER_RING == 1)
-#define ASID_INSERT(x) ( ((ASID_RESERVED_1) << 24) + \
- ((ASID_RESERVED_2) << 16) + \
- (((x) & (ASID_MASK)) << 8) + \
- ((XCHAL_MMU_ASID_KERNEL)) )
-
-#elif (USER_RING == 2)
-#define ASID_INSERT(x) ( ((ASID_RESERVED_1) << 24) + \
- (((x) & (ASID_MASK)) << 16) + \
- ((ASID_RESERVED_2) << 8) + \
- ((XCHAL_MMU_ASID_KERNEL)) )
-
-#elif (USER_RING == 3)
-#define ASID_INSERT(x) ( (((x) & (ASID_MASK)) << 24) + \
- ((ASID_RESERVED_1) << 16) + \
- ((ASID_RESERVED_2) << 8) + \
- ((XCHAL_MMU_ASID_KERNEL)) )
-
-#else
-#error Goofy value for USER_RING
-
-#endif /* USER_RING == 1 */
-
-
-/*
- * All unused by hardware upper bits will be considered
- * as a software asid extension.
+ * any user or kernel context.
+ *
+ * 0 invalid
+ * 1 kernel
+ * 2 reserved
+ * 3 reserved
+ * 4...255 available
*/
-#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
-#define ASID_FIRST_VERSION \
- ((unsigned long)(~ASID_VERSION_MASK) + 1 + ASID_FIRST_NONRESERVED)
+#define NO_CONTEXT 0
+#define ASID_USER_FIRST 4
+#define ASID_MASK ((1 << XCHAL_MMU_ASID_BITS) - 1)
+#define ASID_INSERT(x) (0x03020001 | (((x) & ASID_MASK) << 8))
static inline void set_rasid_register (unsigned long val)
{
static inline unsigned long get_rasid_register (void)
{
unsigned long tmp;
- __asm__ __volatile__ (" rsr %0, "__stringify(RASID)"\n\t" : "=a" (tmp));
+ __asm__ __volatile__ (" rsr %0,"__stringify(RASID)"\n\t" : "=a" (tmp));
return tmp;
}
-
-#if ((XCHAL_MMU_ASID_INVALID == 0) && (XCHAL_MMU_ASID_KERNEL == 1))
-
static inline void
-get_new_mmu_context(struct mm_struct *mm, unsigned long asid)
+__get_new_mmu_context(struct mm_struct *mm)
{
extern void flush_tlb_all(void);
- if (! ((asid += ASID_INC) & ASID_MASK) ) {
+ if (! (++asid_cache & ASID_MASK) ) {
flush_tlb_all(); /* start new asid cycle */
- if (!asid) /* fix version if needed */
- asid = ASID_FIRST_VERSION - ASID_FIRST_NONRESERVED;
- asid += ASID_FIRST_NONRESERVED;
+ asid_cache += ASID_USER_FIRST;
}
- mm->context = asid_cache = asid;
-}
-
-#else
-#warning ASID_{INVALID,KERNEL} values impose non-optimal get_new_mmu_context implementation
-
-/* XCHAL_MMU_ASID_INVALID == 0 and XCHAL_MMU_ASID_KERNEL ==1 are
- really the best, but if you insist... */
-
-static inline int validate_asid (unsigned long asid)
-{
- switch (asid) {
- case XCHAL_MMU_ASID_INVALID:
- case XCHAL_MMU_ASID_KERNEL:
- case ASID_RESERVED_1:
- case ASID_RESERVED_2:
- case ASID_RESERVED_3:
- return 0; /* can't use these values as ASIDs */
- }
- return 1; /* valid */
+ mm->context = asid_cache;
}
static inline void
-get_new_mmu_context(struct mm_struct *mm, unsigned long asid)
+__load_mmu_context(struct mm_struct *mm)
{
- extern void flush_tlb_all(void);
- while (1) {
- asid += ASID_INC;
- if ( ! (asid & ASID_MASK) ) {
- flush_tlb_all(); /* start new asid cycle */
- if (!asid) /* fix version if needed */
- asid = ASID_FIRST_VERSION - ASID_FIRST_NONRESERVED;
- asid += ASID_FIRST_NONRESERVED;
- break; /* no need to validate here */
- }
- if (validate_asid (asid & ASID_MASK))
- break;
- }
- mm->context = asid_cache = asid;
+ set_rasid_register(ASID_INSERT(mm->context));
+ invalidate_page_directory();
}
-#endif
-
-
/*
* Initialize the context related info for a new mm_struct
* instance.
return 0;
}
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void
+activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+ /* Unconditionally get a new ASID. */
+
+ __get_new_mmu_context(next);
+ __load_mmu_context(next);
+}
+
+
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
/* Check if our ASID is of an older version and thus invalid */
- if ((next->context ^ asid) & ASID_VERSION_MASK)
- get_new_mmu_context(next, asid);
+ if (next->context == NO_CONTEXT || ((next->context^asid) & ~ASID_MASK))
+ __get_new_mmu_context(next);
- set_rasid_register (ASID_INSERT(next->context));
- invalidate_page_directory();
+ __load_mmu_context(next);
}
#define deactivate_mm(tsk, mm) do { } while(0)
*/
static inline void destroy_context(struct mm_struct *mm)
{
- /* Nothing to do. */
-}
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void
-activate_mm(struct mm_struct *prev, struct mm_struct *next)
-{
- /* Unconditionally get a new ASID. */
-
- get_new_mmu_context(next, asid_cache);
- set_rasid_register (ASID_INSERT(next->context));
invalidate_page_directory();
}
#include <asm/processor.h>
+#define XCHAL_KSEG_CACHED_VADDR 0xd0000000
+#define XCHAL_KSEG_BYPASS_VADDR 0xd8000000
+#define XCHAL_KSEG_PADDR 0x00000000
+#define XCHAL_KSEG_SIZE 0x08000000
+
/*
* PAGE_SHIFT determines the page size
* PAGE_ALIGN(x) aligns the pointer to the (next) page boundary
*/
-#define PAGE_SHIFT XCHAL_MMU_MIN_PTE_PAGE_SIZE
+#define PAGE_SHIFT 12
#define PAGE_SIZE (1 << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE - 1) & PAGE_MASK)
-#define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE / XCHAL_DCACHE_WAYS)
#define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR
+#define MAX_MEM_PFN XCHAL_KSEG_SIZE
+#define PGTABLE_START 0x80000000
#ifdef __ASSEMBLY__
#ifndef _XTENSA_PARAM_H
#define _XTENSA_PARAM_H
-#include <xtensa/config/core.h>
+#include <asm/variant/core.h>
#ifdef __KERNEL__
# define HZ 100 /* internal timer frequency */
#include <asm-generic/pgtable-nopmd.h>
#include <asm/page.h>
-/* Assertions. */
-
-#ifdef CONFIG_MMU
-
-
-#if (XCHAL_MMU_RINGS < 2)
-# error Linux build assumes at least 2 ring levels.
-#endif
-
-#if (XCHAL_MMU_CA_BITS != 4)
-# error We assume exactly four bits for CA.
-#endif
-
-#if (XCHAL_MMU_SR_BITS != 0)
-# error We have no room for SR bits.
-#endif
-
-/*
- * Use the first min-wired way for mapping page-table pages.
- * Page coloring requires a second min-wired way.
- */
-
-#if (XCHAL_DTLB_MINWIRED_SETS == 0)
-# error Need a min-wired way for mapping page-table pages
-#endif
-
-#define DTLB_WAY_PGTABLE XCHAL_DTLB_SET(XCHAL_DTLB_MINWIRED_SET0, WAY)
-
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
-# if XCHAL_DTLB_SET(XCHAL_DTLB_MINWIRED_SET0, WAYS) >= 2
-# define DTLB_WAY_DCACHE_ALIAS0 (DTLB_WAY_PGTABLE + 1)
-# define DTLB_WAY_DCACHE_ALIAS1 (DTLB_WAY_PGTABLE + 2)
-# else
-# error Page coloring requires its own wired dtlb way!
-# endif
-#endif
-
-#endif /* CONFIG_MMU */
-
/*
* We only use two ring levels, user and kernel space.
*/
#define PGD_ORDER 0
#define PMD_ORDER 0
#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
-#define FIRST_USER_ADDRESS XCHAL_SEG_MAPPABLE_VADDR
+#define FIRST_USER_ADDRESS 0
#define FIRST_USER_PGD_NR (FIRST_USER_ADDRESS >> PGDIR_SHIFT)
/* virtual memory area. We keep a distance to other memory regions to be
* This file contains the default configuration of ISS.
*/
-#ifndef __ASM_XTENSA_ISS_HARDWARE
-#define __ASM_XTENSA_ISS_HARDWARE
+#ifndef _XTENSA_PLATFORM_ISS_HARDWARE_H
+#define _XTENSA_PLATFORM_ISS_HARDWARE_H
/*
* Memory configuration.
*/
-#define PLATFORM_DEFAULT_MEM_START XSHAL_RAM_PADDR
-#define PLATFORM_DEFAULT_MEM_SIZE XSHAL_RAM_VSIZE
+#define PLATFORM_DEFAULT_MEM_START 0x00000000
+#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000
/*
* Interrupt configuration.
*/
-#endif /* __ASM_XTENSA_ISS_HARDWARE */
+#endif /* _XTENSA_PLATFORM_ISS_HARDWARE_H */
--- /dev/null
+/*
+ * include/asm-xtensa/platform-iss/hardware.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PLATFORM_ISS_SIMCALL_H
+#define _XTENSA_PLATFORM_ISS_SIMCALL_H
+
+
+/*
+ * System call like services offered by the simulator host.
+ */
+
+#define SYS_nop 0 /* unused */
+#define SYS_exit 1 /*x*/
+#define SYS_fork 2
+#define SYS_read 3 /*x*/
+#define SYS_write 4 /*x*/
+#define SYS_open 5 /*x*/
+#define SYS_close 6 /*x*/
+#define SYS_rename 7 /*x 38 - waitpid */
+#define SYS_creat 8 /*x*/
+#define SYS_link 9 /*x (not implemented on WIN32) */
+#define SYS_unlink 10 /*x*/
+#define SYS_execv 11 /* n/a - execve */
+#define SYS_execve 12 /* 11 - chdir */
+#define SYS_pipe 13 /* 42 - time */
+#define SYS_stat 14 /* 106 - mknod */
+#define SYS_chmod 15
+#define SYS_chown 16 /* 202 - lchown */
+#define SYS_utime 17 /* 30 - break */
+#define SYS_wait 18 /* n/a - oldstat */
+#define SYS_lseek 19 /*x*/
+#define SYS_getpid 20
+#define SYS_isatty 21 /* n/a - mount */
+#define SYS_fstat 22 /* 108 - oldumount */
+#define SYS_time 23 /* 13 - setuid */
+#define SYS_gettimeofday 24 /*x 78 - getuid (not implemented on WIN32) */
+#define SYS_times 25 /*X 43 - stime (Xtensa-specific implementation) */
+#define SYS_socket 26
+#define SYS_sendto 27
+#define SYS_recvfrom 28
+#define SYS_select_one 29 /* not compitible select, one file descriptor at the time */
+#define SYS_bind 30
+#define SYS_ioctl 31
+
+/*
+ * SYS_select_one specifiers
+ */
+
+#define XTISS_SELECT_ONE_READ 1
+#define XTISS_SELECT_ONE_WRITE 2
+#define XTISS_SELECT_ONE_EXCEPT 3
+
+
+#endif /* _XTENSA_PLATFORM_ISS_SIMCALL_H */
+
typedef unsigned long __kernel_ino_t;
typedef unsigned int __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
+typedef unsigned long __kernel_nlink_t;
typedef long __kernel_off_t;
typedef int __kernel_pid_t;
typedef unsigned short __kernel_ipc_pid_t;
#ifndef _XTENSA_PROCESSOR_H
#define _XTENSA_PROCESSOR_H
-#ifdef __ASSEMBLY__
-#define _ASMLANGUAGE
-#endif
-
-#include <xtensa/config/core.h>
-#include <xtensa/config/specreg.h>
-#include <xtensa/config/tie.h>
-#include <xtensa/config/system.h>
+#include <asm/variant/core.h>
+#include <asm/coprocessor.h>
#include <linux/compiler.h>
#include <asm/ptrace.h>
#include <asm/types.h>
-#include <asm/coprocessor.h>
+#include <asm/regs.h>
/* Assertions. */
#if (XCHAL_HAVE_WINDOWED != 1)
-#error Linux requires the Xtensa Windowed Registers Option.
+# error Linux requires the Xtensa Windowed Registers Option.
#endif
/*
* Note: We set-up ps as if we did a call4 to the new pc.
* set_thread_state in signal.c depends on it.
*/
-#define USER_PS_VALUE ( (1 << XCHAL_PS_WOE_SHIFT) + \
- (1 << XCHAL_PS_CALLINC_SHIFT) + \
- (USER_RING << XCHAL_PS_RING_SHIFT) + \
- (1 << XCHAL_PS_PROGSTACK_SHIFT) + \
- (1 << XCHAL_PS_EXCM_SHIFT) )
+#define USER_PS_VALUE ((1 << PS_WOE_BIT) | \
+ (1 << PS_CALLINC_SHIFT) | \
+ (USER_RING << PS_RING_SHIFT) | \
+ (1 << PS_UM_BIT) | \
+ (1 << PS_EXCM_BIT))
/* Clearing a0 terminates the backtrace. */
#define start_thread(regs, new_pc, new_sp) \
#ifndef _XTENSA_PTRACE_H
#define _XTENSA_PTRACE_H
-#include <xtensa/config/core.h>
+#include <asm/variant/core.h>
/*
* Kernel stack
--- /dev/null
+/*
+ * Copyright (c) 2006 Tensilica, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2.1 of the GNU Lesser General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Further, this software is distributed without any warranty that it is
+ * free of the rightful claim of any third person regarding infringement
+ * or the like. Any license provided herein, whether implied or
+ * otherwise, applies only to this software file. Patent licenses, if
+ * any, provided herein do not apply to combinations of this program with
+ * other software, or any other product whatsoever.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
+ * USA.
+ */
+
+#ifndef _XTENSA_REGS_H
+#define _XTENSA_REGS_H
+
+/* Special registers. */
+
+#define LBEG 0
+#define LEND 1
+#define LCOUNT 2
+#define SAR 3
+#define BR 4
+#define SCOMPARE1 12
+#define ACCHI 16
+#define ACCLO 17
+#define MR 32
+#define WINDOWBASE 72
+#define WINDOWSTART 73
+#define PTEVADDR 83
+#define RASID 90
+#define ITLBCFG 91
+#define DTLBCFG 92
+#define IBREAKENABLE 96
+#define DDR 104
+#define IBREAKA 128
+#define DBREAKA 144
+#define DBREAKC 160
+#define EPC 176
+#define EPC_1 177
+#define DEPC 192
+#define EPS 192
+#define EPS_1 193
+#define EXCSAVE 208
+#define EXCSAVE_1 209
+#define INTERRUPT 226
+#define INTENABLE 228
+#define PS 230
+#define THREADPTR 231
+#define EXCCAUSE 232
+#define DEBUGCAUSE 233
+#define CCOUNT 234
+#define PRID 235
+#define ICOUNT 236
+#define ICOUNTLEVEL 237
+#define EXCVADDR 238
+#define CCOMPARE 240
+#define MISC 244
+
+/* Special names for read-only and write-only interrupt registers. */
+
+#define INTREAD 226
+#define INTSET 226
+#define INTCLEAR 227
+
+/* EXCCAUSE register fields */
+
+#define EXCCAUSE_EXCCAUSE_SHIFT 0
+#define EXCCAUSE_EXCCAUSE_MASK 0x3F
+
+#define EXCCAUSE_ILLEGAL_INSTRUCTION 0
+#define EXCCAUSE_SYSTEM_CALL 1
+#define EXCCAUSE_INSTRUCTION_FETCH_ERROR 2
+#define EXCCAUSE_LOAD_STORE_ERROR 3
+#define EXCCAUSE_LEVEL1_INTERRUPT 4
+#define EXCCAUSE_ALLOCA 5
+#define EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6
+#define EXCCAUSE_SPECULATION 7
+#define EXCCAUSE_PRIVILEGED 8
+#define EXCCAUSE_UNALIGNED 9
+#define EXCCAUSE_ITLB_MISS 16
+#define EXCCAUSE_ITLB_MULTIHIT 17
+#define EXCCAUSE_ITLB_PRIVILEGE 18
+#define EXCCAUSE_ITLB_SIZE_RESTRICTION 19
+#define EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20
+#define EXCCAUSE_DTLB_MISS 24
+#define EXCCAUSE_DTLB_MULTIHIT 25
+#define EXCCAUSE_DTLB_PRIVILEGE 26
+#define EXCCAUSE_DTLB_SIZE_RESTRICTION 27
+#define EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28
+#define EXCCAUSE_STORE_CACHE_ATTRIBUTE 29
+#define EXCCAUSE_FLOATING_POINT 40
+
+/* PS register fields. */
+
+#define PS_WOE_BIT 18
+#define PS_CALLINC_SHIFT 16
+#define PS_CALLINC_MASK 0x00030000
+#define PS_OWB_SHIFT 8
+#define PS_OWB_MASK 0x00000F00
+#define PS_RING_SHIFT 6
+#define PS_RING_MASK 0x000000C0
+#define PS_UM_BIT 5
+#define PS_EXCM_BIT 4
+#define PS_INTLEVEL_SHIFT 0
+#define PS_INTLEVEL_MASK 0x0000000F
+
+/* DBREAKCn register fields. */
+
+#define DBREAKC_MASK_BIT 0
+#define DBREAKC_MASK_MASK 0x0000003F
+#define DBREAKC_LOAD_BIT 30
+#define DBREAKC_LOAD_MASK 0x40000000
+#define DBREAKC_STOR_BIT 31
+#define DBREAKC_STOR_MASK 0x80000000
+
+/* DEBUGCAUSE register fields. */
+
+#define DEBUGCAUSE_DEBUGINT_BIT 5 /* External debug interrupt */
+#define DEBUGCAUSE_BREAKN_BIT 4 /* BREAK.N instruction */
+#define DEBUGCAUSE_BREAK_BIT 3 /* BREAK instruction */
+#define DEBUGCAUSE_DBREAK_BIT 2 /* DBREAK match */
+#define DEBUGCAUSE_IBREAK_BIT 1 /* IBREAK match */
+#define DEBUGCAUSE_ICOUNT_BIT 0 /* ICOUNT would incr. to zero */
+
+#endif /* _XTENSA_SPECREG_H */
+
struct semid64_ds {
struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
-#if XCHAL_HAVE_LE
+#ifdef __XTENSA_EL__
__kernel_time_t sem_otime; /* last semop time */
unsigned long __unused1;
__kernel_time_t sem_ctime; /* last change time */
#ifndef _XTENSA_SHMBUF_H
#define _XTENSA_SHMBUF_H
+#if defined (__XTENSA_EL__)
struct shmid64_ds {
struct ipc64_perm shm_perm; /* operation perms */
size_t shm_segsz; /* size of segment (bytes) */
unsigned long __unused4;
unsigned long __unused5;
};
+#elif defined (__XTENSA_EB__)
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+#else
+# error endian order not defined
+#endif
+
struct shminfo64 {
unsigned long shmmax;
#include <linux/types.h>
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
#define STAT_HAVE_NSEC 1
struct stat {
- unsigned short st_dev;
- unsigned short __pad1;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned short __pad2;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
+ unsigned long st_dev;
+ ino_t st_ino;
+ mode_t st_mode;
+ nlink_t st_nlink;
+ uid_t st_uid;
+ gid_t st_gid;
+ unsigned int st_rdev;
+ off_t st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
};
-/* This matches struct stat64 in glibc-2.2.3. */
+/* This matches struct stat64 in glibc-2.3 */
struct stat64 {
-#ifdef __XTENSA_EL__
- unsigned short st_dev; /* Device */
- unsigned char __pad0[10];
-#else
- unsigned char __pad0[6];
- unsigned short st_dev;
- unsigned char __pad1[2];
-#endif
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino; /* 32bit file serial number. */
-
+ unsigned long long st_dev; /* Device */
+ unsigned long long st_ino; /* File serial number */
unsigned int st_mode; /* File mode. */
unsigned int st_nlink; /* Link count. */
unsigned int st_uid; /* User ID of the file's owner. */
unsigned int st_gid; /* Group ID of the file's group. */
-
-#ifdef __XTENSA_EL__
- unsigned short st_rdev; /* Device number, if device. */
- unsigned char __pad3[10];
-#else
- unsigned char __pad2[6];
- unsigned short st_rdev;
- unsigned char __pad3[2];
-#endif
-
- long long int st_size; /* Size of file, in bytes. */
- long int st_blksize; /* Optimal block size for I/O. */
-
-#ifdef __XTENSA_EL__
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
- unsigned long __pad4;
+ unsigned long long st_rdev; /* Device number, if device. */
+ long long st_size; /* Size of file, in bytes. */
+ long st_blksize; /* Optimal block size for I/O. */
+ unsigned long __unused2;
+#ifdef __XTENSA_EB__
+ unsigned long __unused3;
+ long st_blocks; /* Number 512-byte blocks allocated. */
#else
- unsigned long __pad4;
- unsigned long st_blocks;
+ long st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned long __unused3;
#endif
-
- unsigned long __pad5;
- long int st_atime; /* Time of last access. */
- unsigned long st_atime_nsec;
- long int st_mtime; /* Time of last modification. */
- unsigned long st_mtime_nsec;
- long int st_ctime; /* Time of last status change. */
- unsigned long st_ctime_nsec;
- unsigned long long int st_ino; /* File serial number. */
+ long st_atime; /* Time of last access. */
+ unsigned long st_atime_nsec;
+ long st_mtime; /* Time of last modification. */
+ unsigned long st_mtime_nsec;
+ long st_ctime; /* Time of last status change. */
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
};
#endif /* _XTENSA_STAT_H */
--- /dev/null
+struct pt_regs;
+struct sigaction;
+asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*);
+asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*);
+asmlinkage long xtensa_pipe(int __user *);
+asmlinkage long xtensa_mmap2(unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long, unsigned long);
+asmlinkage long xtensa_ptrace(long, long, long, long);
+asmlinkage long xtensa_sigreturn(struct pt_regs*);
+asmlinkage long xtensa_rt_sigreturn(struct pt_regs*);
+asmlinkage long xtensa_sigsuspend(struct pt_regs*);
+asmlinkage long xtensa_rt_sigsuspend(struct pt_regs*);
+asmlinkage long xtensa_sigaction(int, const struct old_sigaction*,
+ struct old_sigaction*);
+asmlinkage long xtensa_sigaltstack(struct pt_regs *regs);
+asmlinkage long sys_rt_sigaction(int,
+ const struct sigaction __user *,
+ struct sigaction __user *,
+ size_t);
+asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg);
unsigned int a0, ps;
__asm__ __volatile__ (
- "movi a14," __stringify (PS_EXCM_MASK) " | 1\n\t"
+ "movi a14," __stringify (PS_EXCM_BIT) " | 1\n\t"
"mov a12, a0\n\t"
"rsr a13," __stringify(SAR) "\n\t"
"xsr a14," __stringify(PS) "\n\t"
cc_t c_cc[NCCS]; /* control characters */
};
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* c_cc characters */
#define VINTR 0
#include <asm/processor.h>
#include <linux/stringify.h>
-#if XCHAL_INT_LEVEL(XCHAL_TIMER0_INTERRUPT) == 1
+#define _INTLEVEL(x) XCHAL_INT ## x ## _LEVEL
+#define INTLEVEL(x) _INTLEVEL(x)
+
+#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) == 1
# define LINUX_TIMER 0
-#elif XCHAL_INT_LEVEL(XCHAL_TIMER1_INTERRUPT) == 1
+# define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT
+#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) == 1
# define LINUX_TIMER 1
-#elif XCHAL_INT_LEVEL(XCHAL_TIMER2_INTERRUPT) == 1
+# define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT
+#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) == 1
# define LINUX_TIMER 2
+# define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT
#else
# error "Bad timer number for Linux configurations!"
#endif
-#define LINUX_TIMER_INT XCHAL_TIMER_INTERRUPT(LINUX_TIMER)
#define LINUX_TIMER_MASK (1L << LINUX_TIMER_INT)
#define CLOCK_TICK_RATE 1193180 /* (everyone is using this value) */
#define WSR_CCOUNT(r) __asm__("wsr %0,"__stringify(CCOUNT) :: "a" (r))
#define RSR_CCOUNT(r) __asm__("rsr %0,"__stringify(CCOUNT) : "=a" (r))
-#define WSR_CCOMPARE(x,r) __asm__("wsr %0,"__stringify(CCOMPARE_0)"+"__stringify(x) :: "a"(r))
-#define RSR_CCOMPARE(x,r) __asm__("rsr %0,"__stringify(CCOMPARE_0)"+"__stringify(x) : "=a"(r))
+#define WSR_CCOMPARE(x,r) __asm__("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r))
+#define RSR_CCOMPARE(x,r) __asm__("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r))
static inline unsigned long get_ccount (void)
{
#ifndef _XTENSA_TLBFLUSH_H
#define _XTENSA_TLBFLUSH_H
-#define DEBUG_TLB
-
#ifdef __KERNEL__
-#include <asm/processor.h>
#include <linux/stringify.h>
+#include <asm/processor.h>
+
+#define DTLB_WAY_PGD 7
+
+#define ITLB_ARF_WAYS 4
+#define DTLB_ARF_WAYS 4
+
+#define ITLB_HIT_BIT 3
+#define DTLB_HIT_BIT 4
+
+#ifndef __ASSEMBLY__
/* TLB flushing:
*
/* TLB operations. */
-#define ITLB_WAYS_LOG2 XCHAL_ITLB_WAY_BITS
-#define DTLB_WAYS_LOG2 XCHAL_DTLB_WAY_BITS
-#define ITLB_PROBE_SUCCESS (1 << ITLB_WAYS_LOG2)
-#define DTLB_PROBE_SUCCESS (1 << DTLB_WAYS_LOG2)
-
static inline unsigned long itlb_probe(unsigned long addr)
{
unsigned long tmp;
static inline void invalidate_page_directory (void)
{
- invalidate_dtlb_entry (DTLB_WAY_PGTABLE);
+ invalidate_dtlb_entry (DTLB_WAY_PGD);
+ invalidate_dtlb_entry (DTLB_WAY_PGD+1);
+ invalidate_dtlb_entry (DTLB_WAY_PGD+2);
}
static inline void invalidate_itlb_mapping (unsigned address)
{
unsigned long tlb_entry;
- while ((tlb_entry = itlb_probe (address)) & ITLB_PROBE_SUCCESS)
- invalidate_itlb_entry (tlb_entry);
+ if (((tlb_entry = itlb_probe(address)) & (1 << ITLB_HIT_BIT)) != 0)
+ invalidate_itlb_entry(tlb_entry);
}
static inline void invalidate_dtlb_mapping (unsigned address)
{
unsigned long tlb_entry;
- while ((tlb_entry = dtlb_probe (address)) & DTLB_PROBE_SUCCESS)
- invalidate_dtlb_entry (tlb_entry);
+ if (((tlb_entry = dtlb_probe(address)) & (1 << DTLB_HIT_BIT)) != 0)
+ invalidate_dtlb_entry(tlb_entry);
}
#define check_pgt_cache() do { } while (0)
-#ifdef DEBUG_TLB
-
-/* DO NOT USE THESE FUNCTIONS. These instructions aren't part of the Xtensa
+/*
+ * DO NOT USE THESE FUNCTIONS. These instructions aren't part of the Xtensa
* ISA and exist only for test purposes..
* You may find it helpful for MMU debugging, however.
*
return tmp;
}
-#endif /* DEBUG_TLB */
-
-
+#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
-#endif /* _XTENSA_PGALLOC_H */
+#endif /* _XTENSA_TLBFLUSH_H */
#ifdef __ASSEMBLY__
-#define _ASMLANGUAGE
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/processor.h>
#ifndef _XTENSA_UNISTD_H
#define _XTENSA_UNISTD_H
-#define __NR_spill 0
-#define __NR_exit 1
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_lchown 16
-#define __NR_break 17
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_ptrace 26
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_iopl 110
-#define __NR_vhangup 111
-#define __NR_idle 112
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_modify_ldt 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_cacheflush 147
-#define __NR_cachectl 148
-#define __NR_sysxtensa 149
-#define __NR_sysdummy 150
-#define __NR_getsid 151
-#define __NR_fdatasync 152
-#define __NR__sysctl 153
-#define __NR_mlock 154
-#define __NR_munlock 155
-#define __NR_mlockall 156
-#define __NR_munlockall 157
-#define __NR_sched_setparam 158
-#define __NR_sched_getparam 159
-#define __NR_sched_setscheduler 160
-#define __NR_sched_getscheduler 161
-#define __NR_sched_yield 162
-#define __NR_sched_get_priority_max 163
-#define __NR_sched_get_priority_min 164
-#define __NR_sched_rr_get_interval 165
-#define __NR_nanosleep 166
-#define __NR_mremap 167
-#define __NR_accept 168
-#define __NR_bind 169
-#define __NR_connect 170
-#define __NR_getpeername 171
-#define __NR_getsockname 172
-#define __NR_getsockopt 173
-#define __NR_listen 174
-#define __NR_recv 175
-#define __NR_recvfrom 176
-#define __NR_recvmsg 177
-#define __NR_send 178
-#define __NR_sendmsg 179
-#define __NR_sendto 180
-#define __NR_setsockopt 181
-#define __NR_shutdown 182
-#define __NR_socket 183
-#define __NR_socketpair 184
-#define __NR_setresuid 185
-#define __NR_getresuid 186
-#define __NR_query_module 187
-#define __NR_poll 188
-#define __NR_nfsservctl 189
-#define __NR_setresgid 190
-#define __NR_getresgid 191
-#define __NR_prctl 192
-#define __NR_rt_sigreturn 193
-#define __NR_rt_sigaction 194
-#define __NR_rt_sigprocmask 195
-#define __NR_rt_sigpending 196
-#define __NR_rt_sigtimedwait 197
-#define __NR_rt_sigqueueinfo 198
-#define __NR_rt_sigsuspend 199
-#define __NR_pread 200
-#define __NR_pwrite 201
-#define __NR_chown 202
-#define __NR_getcwd 203
-#define __NR_capget 204
-#define __NR_capset 205
-#define __NR_sigaltstack 206
-#define __NR_sendfile 207
-#define __NR_mmap2 210
-#define __NR_truncate64 211
-#define __NR_ftruncate64 212
-#define __NR_stat64 213
-#define __NR_lstat64 214
-#define __NR_fstat64 215
-#define __NR_pivot_root 216
-#define __NR_mincore 217
-#define __NR_madvise 218
-#define __NR_getdents64 219
-
-/* Keep this last; should always equal the last valid call number. */
-#define __NR_Linux_syscalls 220
-
-/* user-visible error numbers are in the range -1 - -125: see
- * <asm-xtensa/errno.h> */
-
-#define SYSXTENSA_RESERVED 0 /* don't use this */
-#define SYSXTENSA_ATOMIC_SET 1 /* set variable */
-#define SYSXTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */
-#define SYSXTENSA_ATOMIC_ADD 3 /* add to memory */
-#define SYSXTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */
-
-#define SYSXTENSA_COUNT 5 /* count of syscall0 functions*/
+#ifndef __SYSCALL
+# define __SYSCALL(nr,func,nargs)
+#endif
+
+#define __NR_spill 0
+__SYSCALL( 0, sys_ni_syscall, 0)
+#define __NR_xtensa 1
+__SYSCALL( 1, sys_ni_syscall, 0)
+#define __NR_available4 2
+__SYSCALL( 2, sys_ni_syscall, 0)
+#define __NR_available5 3
+__SYSCALL( 3, sys_ni_syscall, 0)
+#define __NR_available6 4
+__SYSCALL( 4, sys_ni_syscall, 0)
+#define __NR_available7 5
+__SYSCALL( 5, sys_ni_syscall, 0)
+#define __NR_available8 6
+__SYSCALL( 6, sys_ni_syscall, 0)
+#define __NR_available9 7
+__SYSCALL( 7, sys_ni_syscall, 0)
+
+/* File Operations */
+
+#define __NR_open 8
+__SYSCALL( 8, sys_open, 3)
+#define __NR_close 9
+__SYSCALL( 9, sys_close, 1)
+#define __NR_dup 10
+__SYSCALL( 10, sys_dup, 1)
+#define __NR_dup2 11
+__SYSCALL( 11, sys_dup2, 2)
+#define __NR_read 12
+__SYSCALL( 12, sys_read, 3)
+#define __NR_write 13
+__SYSCALL( 13, sys_write, 3)
+#define __NR_select 14
+__SYSCALL( 14, sys_select, 5)
+#define __NR_lseek 15
+__SYSCALL( 15, sys_lseek, 3)
+#define __NR_poll 16
+__SYSCALL( 16, sys_poll, 3)
+#define __NR__llseek 17
+__SYSCALL( 17, sys_llseek, 5)
+#define __NR_epoll_wait 18
+__SYSCALL( 18, sys_epoll_wait, 4)
+#define __NR_epoll_ctl 19
+__SYSCALL( 19, sys_epoll_ctl, 4)
+#define __NR_epoll_create 20
+__SYSCALL( 20, sys_epoll_create, 1)
+#define __NR_creat 21
+__SYSCALL( 21, sys_creat, 2)
+#define __NR_truncate 22
+__SYSCALL( 22, sys_truncate, 2)
+#define __NR_ftruncate 23
+__SYSCALL( 23, sys_ftruncate, 2)
+#define __NR_readv 24
+__SYSCALL( 24, sys_readv, 3)
+#define __NR_writev 25
+__SYSCALL( 25, sys_writev, 3)
+#define __NR_fsync 26
+__SYSCALL( 26, sys_fsync, 1)
+#define __NR_fdatasync 27
+__SYSCALL( 27, sys_fdatasync, 1)
+#define __NR_truncate64 28
+__SYSCALL( 28, sys_truncate64, 2)
+#define __NR_ftruncate64 29
+__SYSCALL( 29, sys_ftruncate64, 2)
+#define __NR_pread64 30
+__SYSCALL( 30, sys_pread64, 6)
+#define __NR_pwrite64 31
+__SYSCALL( 31, sys_pwrite64, 6)
+
+#define __NR_link 32
+__SYSCALL( 32, sys_link, 2)
+#define __NR_rename 33
+__SYSCALL( 33, sys_rename, 2)
+#define __NR_symlink 34
+__SYSCALL( 34, sys_symlink, 2)
+#define __NR_readlink 35
+__SYSCALL( 35, sys_readlink, 3)
+#define __NR_mknod 36
+__SYSCALL( 36, sys_mknod, 3)
+#define __NR_pipe 37
+__SYSCALL( 37, xtensa_pipe, 1)
+#define __NR_unlink 38
+__SYSCALL( 38, sys_unlink, 1)
+#define __NR_rmdir 39
+__SYSCALL( 39, sys_rmdir, 1)
+
+#define __NR_mkdir 40
+__SYSCALL( 40, sys_mkdir, 2)
+#define __NR_chdir 41
+__SYSCALL( 41, sys_chdir, 1)
+#define __NR_fchdir 42
+__SYSCALL( 42, sys_fchdir, 1)
+#define __NR_getcwd 43
+__SYSCALL( 43, sys_getcwd, 2)
+
+#define __NR_chmod 44
+__SYSCALL( 44, sys_chmod, 2)
+#define __NR_chown 45
+__SYSCALL( 45, sys_chown, 3)
+#define __NR_stat 46
+__SYSCALL( 46, sys_newstat, 2)
+#define __NR_stat64 47
+__SYSCALL( 47, sys_stat64, 2)
+
+#define __NR_lchown 48
+__SYSCALL( 48, sys_lchown, 3)
+#define __NR_lstat 49
+__SYSCALL( 49, sys_newlstat, 2)
+#define __NR_lstat64 50
+__SYSCALL( 50, sys_lstat64, 2)
+#define __NR_available51 51
+__SYSCALL( 51, sys_ni_syscall, 0)
+
+#define __NR_fchmod 52
+__SYSCALL( 52, sys_fchmod, 2)
+#define __NR_fchown 53
+__SYSCALL( 53, sys_fchown, 3)
+#define __NR_fstat 54
+__SYSCALL( 54, sys_newfstat, 2)
+#define __NR_fstat64 55
+__SYSCALL( 55, sys_fstat64, 2)
+
+#define __NR_flock 56
+__SYSCALL( 56, sys_flock, 2)
+#define __NR_access 57
+__SYSCALL( 57, sys_access, 2)
+#define __NR_umask 58
+__SYSCALL( 58, sys_umask, 1)
+#define __NR_getdents 59
+__SYSCALL( 59, sys_getdents, 3)
+#define __NR_getdents64 60
+__SYSCALL( 60, sys_getdents64, 3)
+#define __NR_fcntl64 61
+__SYSCALL( 61, sys_fcntl64, 3)
+#define __NR_available62 62
+__SYSCALL( 62, sys_ni_syscall, 0)
+#define __NR_fadvise64_64 63
+__SYSCALL( 63, sys_fadvise64_64, 6)
+#define __NR_utime 64 /* glibc 2.3.3 ?? */
+__SYSCALL( 64, sys_utime, 2)
+#define __NR_utimes 65
+__SYSCALL( 65, sys_utimes, 2)
+#define __NR_ioctl 66
+__SYSCALL( 66, sys_ioctl, 3)
+#define __NR_fcntl 67
+__SYSCALL( 67, sys_fcntl, 3)
+
+#define __NR_setxattr 68
+__SYSCALL( 68, sys_setxattr, 5)
+#define __NR_getxattr 69
+__SYSCALL( 69, sys_getxattr, 4)
+#define __NR_listxattr 70
+__SYSCALL( 70, sys_listxattr, 3)
+#define __NR_removexattr 71
+__SYSCALL( 71, sys_removexattr, 2)
+#define __NR_lsetxattr 72
+__SYSCALL( 72, sys_lsetxattr, 5)
+#define __NR_lgetxattr 73
+__SYSCALL( 73, sys_lgetxattr, 4)
+#define __NR_llistxattr 74
+__SYSCALL( 74, sys_llistxattr, 3)
+#define __NR_lremovexattr 75
+__SYSCALL( 75, sys_lremovexattr, 2)
+#define __NR_fsetxattr 76
+__SYSCALL( 76, sys_fsetxattr, 5)
+#define __NR_fgetxattr 77
+__SYSCALL( 77, sys_fgetxattr, 4)
+#define __NR_flistxattr 78
+__SYSCALL( 78, sys_flistxattr, 3)
+#define __NR_fremovexattr 79
+__SYSCALL( 79, sys_fremovexattr, 2)
+
+/* File Map / Shared Memory Operations */
+
+#define __NR_mmap2 80
+__SYSCALL( 80, xtensa_mmap2, 6)
+#define __NR_munmap 81
+__SYSCALL( 81, sys_munmap, 2)
+#define __NR_mprotect 82
+__SYSCALL( 82, sys_mprotect, 3)
+#define __NR_brk 83
+__SYSCALL( 83, sys_brk, 1)
+#define __NR_mlock 84
+__SYSCALL( 84, sys_mlock, 2)
+#define __NR_munlock 85
+__SYSCALL( 85, sys_munlock, 2)
+#define __NR_mlockall 86
+__SYSCALL( 86, sys_mlockall, 1)
+#define __NR_munlockall 87
+__SYSCALL( 87, sys_munlockall, 0)
+#define __NR_mremap 88
+__SYSCALL( 88, sys_mremap, 4)
+#define __NR_msync 89
+__SYSCALL( 89, sys_msync, 3)
+#define __NR_mincore 90
+__SYSCALL( 90, sys_mincore, 3)
+#define __NR_madvise 91
+__SYSCALL( 91, sys_madvise, 3)
+#define __NR_shmget 92
+__SYSCALL( 92, sys_shmget, 4)
+#define __NR_shmat 93
+__SYSCALL( 93, xtensa_shmat, 4)
+#define __NR_shmctl 94
+__SYSCALL( 94, sys_shmctl, 4)
+#define __NR_shmdt 95
+__SYSCALL( 95, sys_shmdt, 4)
+
+/* Socket Operations */
+
+#define __NR_socket 96
+__SYSCALL( 96, sys_socket, 3)
+#define __NR_setsockopt 97
+__SYSCALL( 97, sys_setsockopt, 5)
+#define __NR_getsockopt 98
+__SYSCALL( 98, sys_getsockopt, 5)
+#define __NR_shutdown 99
+__SYSCALL( 99, sys_shutdown, 2)
+
+#define __NR_bind 100
+__SYSCALL(100, sys_bind, 3)
+#define __NR_connect 101
+__SYSCALL(101, sys_connect, 3)
+#define __NR_listen 102
+__SYSCALL(102, sys_listen, 2)
+#define __NR_accept 103
+__SYSCALL(103, sys_accept, 3)
+
+#define __NR_getsockname 104
+__SYSCALL(104, sys_getsockname, 3)
+#define __NR_getpeername 105
+__SYSCALL(105, sys_getpeername, 3)
+#define __NR_sendmsg 106
+__SYSCALL(106, sys_sendmsg, 3)
+#define __NR_recvmsg 107
+__SYSCALL(107, sys_recvmsg, 3)
+#define __NR_send 108
+__SYSCALL(108, sys_send, 4)
+#define __NR_recv 109
+__SYSCALL(109, sys_recv, 4)
+#define __NR_sendto 110
+__SYSCALL(110, sys_sendto, 6)
+#define __NR_recvfrom 111
+__SYSCALL(111, sys_recvfrom, 6)
+
+#define __NR_socketpair 112
+__SYSCALL(112, sys_socketpair, 4)
+#define __NR_sendfile 113
+__SYSCALL(113, sys_sendfile, 4)
+#define __NR_sendfile64 114
+__SYSCALL(114, sys_sendfile64, 4)
+#define __NR_available115 115
+__SYSCALL(115, sys_ni_syscall, 0)
+
+/* Process Operations */
+
+#define __NR_clone 116
+__SYSCALL(116, xtensa_clone, 5)
+#define __NR_execve 117
+__SYSCALL(117, xtensa_execve, 3)
+#define __NR_exit 118
+__SYSCALL(118, sys_exit, 1)
+#define __NR_exit_group 119
+__SYSCALL(119, sys_exit_group, 1)
+#define __NR_getpid 120
+__SYSCALL(120, sys_getpid, 0)
+#define __NR_wait4 121
+__SYSCALL(121, sys_wait4, 4)
+#define __NR_waitid 122
+__SYSCALL(122, sys_waitid, 5)
+#define __NR_kill 123
+__SYSCALL(123, sys_kill, 2)
+#define __NR_tkill 124
+__SYSCALL(124, sys_tkill, 2)
+#define __NR_tgkill 125
+__SYSCALL(125, sys_tgkill, 3)
+#define __NR_set_tid_address 126
+__SYSCALL(126, sys_set_tid_address, 1)
+#define __NR_gettid 127
+__SYSCALL(127, sys_gettid, 0)
+#define __NR_setsid 128
+__SYSCALL(128, sys_setsid, 0)
+#define __NR_getsid 129
+__SYSCALL(129, sys_getsid, 1)
+#define __NR_prctl 130
+__SYSCALL(130, sys_prctl, 5)
+#define __NR_personality 131
+__SYSCALL(131, sys_personality, 1)
+#define __NR_getpriority 132
+__SYSCALL(132, sys_getpriority, 2)
+#define __NR_setpriority 133
+__SYSCALL(133, sys_setpriority, 3)
+#define __NR_setitimer 134
+__SYSCALL(134, sys_setitimer, 3)
+#define __NR_getitimer 135
+__SYSCALL(135, sys_getitimer, 2)
+#define __NR_setuid 136
+__SYSCALL(136, sys_setuid, 1)
+#define __NR_getuid 137
+__SYSCALL(137, sys_getuid, 0)
+#define __NR_setgid 138
+__SYSCALL(138, sys_setgid, 1)
+#define __NR_getgid 139
+__SYSCALL(139, sys_getgid, 0)
+#define __NR_geteuid 140
+__SYSCALL(140, sys_geteuid, 0)
+#define __NR_getegid 141
+__SYSCALL(141, sys_getegid, 0)
+#define __NR_setreuid 142
+__SYSCALL(142, sys_setreuid, 2)
+#define __NR_setregid 143
+__SYSCALL(143, sys_setregid, 2)
+#define __NR_setresuid 144
+__SYSCALL(144, sys_setresuid, 3)
+#define __NR_getresuid 145
+__SYSCALL(145, sys_getresuid, 3)
+#define __NR_setresgid 146
+__SYSCALL(146, sys_setresgid, 3)
+#define __NR_getresgid 147
+__SYSCALL(147, sys_getresgid, 3)
+#define __NR_setpgid 148
+__SYSCALL(148, sys_setpgid, 2)
+#define __NR_getpgid 149
+__SYSCALL(149, sys_getpgid, 1)
+#define __NR_getppid 150
+__SYSCALL(150, sys_getppid, 0)
+#define __NR_available151 151
+__SYSCALL(151, sys_ni_syscall, 0)
+
+#define __NR_reserved152 152 /* set_thread_area */
+__SYSCALL(152, sys_ni_syscall, 0)
+#define __NR_reserved153 153 /* get_thread_area */
+__SYSCALL(153, sys_ni_syscall, 0)
+#define __NR_times 154
+__SYSCALL(154, sys_times, 1)
+#define __NR_acct 155
+__SYSCALL(155, sys_acct, 1)
+#define __NR_sched_setaffinity 156
+__SYSCALL(156, sys_sched_setaffinity, 3)
+#define __NR_sched_getaffinity 157
+__SYSCALL(157, sys_sched_getaffinity, 3)
+#define __NR_capget 158
+__SYSCALL(158, sys_capget, 2)
+#define __NR_capset 159
+__SYSCALL(159, sys_capset, 2)
+#define __NR_ptrace 160
+__SYSCALL(160, sys_ptrace, 4)
+#define __NR_semtimedop 161
+__SYSCALL(161, sys_semtimedop, 5)
+#define __NR_semget 162
+__SYSCALL(162, sys_semget, 4)
+#define __NR_semop 163
+__SYSCALL(163, sys_semop, 4)
+#define __NR_semctl 164
+__SYSCALL(164, sys_semctl, 4)
+#define __NR_available165 165
+__SYSCALL(165, sys_ni_syscall, 0)
+#define __NR_msgget 166
+__SYSCALL(166, sys_msgget, 4)
+#define __NR_msgsnd 167
+__SYSCALL(167, sys_msgsnd, 4)
+#define __NR_msgrcv 168
+__SYSCALL(168, sys_msgrcv, 4)
+#define __NR_msgctl 169
+__SYSCALL(169, sys_msgctl, 4)
+#define __NR_available170 170
+__SYSCALL(170, sys_ni_syscall, 0)
+#define __NR_available171 171
+__SYSCALL(171, sys_ni_syscall, 0)
+
+/* File System */
+
+#define __NR_mount 172
+__SYSCALL(172, sys_mount, 5)
+#define __NR_swapon 173
+__SYSCALL(173, sys_swapon, 2)
+#define __NR_chroot 174
+__SYSCALL(174, sys_chroot, 1)
+#define __NR_pivot_root 175
+__SYSCALL(175, sys_pivot_root, 2)
+#define __NR_umount 176
+__SYSCALL(176, sys_umount, 2)
+#define __NR_swapoff 177
+__SYSCALL(177, sys_swapoff, 1)
+#define __NR_sync 178
+__SYSCALL(178, sys_sync, 0)
+#define __NR_available179 179
+__SYSCALL(179, sys_ni_syscall, 0)
+#define __NR_setfsuid 180
+__SYSCALL(180, sys_setfsuid, 1)
+#define __NR_setfsgid 181
+__SYSCALL(181, sys_setfsgid, 1)
+#define __NR_sysfs 182
+__SYSCALL(182, sys_sysfs, 3)
+#define __NR_ustat 183
+__SYSCALL(183, sys_ustat, 2)
+#define __NR_statfs 184
+__SYSCALL(184, sys_statfs, 2)
+#define __NR_fstatfs 185
+__SYSCALL(185, sys_fstatfs, 2)
+#define __NR_statfs64 186
+__SYSCALL(186, sys_statfs64, 3)
+#define __NR_fstatfs64 187
+__SYSCALL(187, sys_fstatfs64, 3)
+
+/* System */
+
+#define __NR_setrlimit 188
+__SYSCALL(188, sys_setrlimit, 2)
+#define __NR_getrlimit 189
+__SYSCALL(189, sys_getrlimit, 2)
+#define __NR_getrusage 190
+__SYSCALL(190, sys_getrusage, 2)
+#define __NR_futex 191
+__SYSCALL(191, sys_futex, 5)
+#define __NR_gettimeofday 192
+__SYSCALL(192, sys_gettimeofday, 2)
+#define __NR_settimeofday 193
+__SYSCALL(193, sys_settimeofday, 2)
+#define __NR_adjtimex 194
+__SYSCALL(194, sys_adjtimex, 1)
+#define __NR_nanosleep 195
+__SYSCALL(195, sys_nanosleep, 2)
+#define __NR_getgroups 196
+__SYSCALL(196, sys_getgroups, 2)
+#define __NR_setgroups 197
+__SYSCALL(197, sys_setgroups, 2)
+#define __NR_sethostname 198
+__SYSCALL(198, sys_sethostname, 2)
+#define __NR_setdomainname 199
+__SYSCALL(199, sys_setdomainname, 2)
+#define __NR_syslog 200
+__SYSCALL(200, sys_syslog, 3)
+#define __NR_vhangup 201
+__SYSCALL(201, sys_vhangup, 0)
+#define __NR_uselib 202
+__SYSCALL(202, sys_uselib, 1)
+#define __NR_reboot 203
+__SYSCALL(203, sys_reboot, 3)
+#define __NR_quotactl 204
+__SYSCALL(204, sys_quotactl, 4)
+#define __NR_nfsservctl 205
+__SYSCALL(205, sys_nfsservctl, 3)
+#define __NR__sysctl 206
+__SYSCALL(206, sys_sysctl, 1)
+#define __NR_bdflush 207
+__SYSCALL(207, sys_bdflush, 2)
+#define __NR_uname 208
+__SYSCALL(208, sys_newuname, 1)
+#define __NR_sysinfo 209
+__SYSCALL(209, sys_sysinfo, 1)
+#define __NR_init_module 210
+__SYSCALL(210, sys_init_module, 2)
+#define __NR_delete_module 211
+__SYSCALL(211, sys_delete_module, 1)
+
+#define __NR_sched_setparam 212
+__SYSCALL(212, sys_sched_setparam, 2)
+#define __NR_sched_getparam 213
+__SYSCALL(213, sys_sched_getparam, 2)
+#define __NR_sched_setscheduler 214
+__SYSCALL(214, sys_sched_setscheduler, 3)
+#define __NR_sched_getscheduler 215
+__SYSCALL(215, sys_sched_getscheduler, 1)
+#define __NR_sched_get_priority_max 216
+__SYSCALL(216, sys_sched_get_priority_max, 1)
+#define __NR_sched_get_priority_min 217
+__SYSCALL(217, sys_sched_get_priority_min, 1)
+#define __NR_sched_rr_get_interval 218
+__SYSCALL(218, sys_sched_rr_get_interval, 2)
+#define __NR_sched_yield 219
+__SYSCALL(219, sys_sched_yield, 0)
+#define __NR_sigreturn 222
+__SYSCALL(222, xtensa_sigreturn, 0)
+
+/* Signal Handling */
+
+#define __NR_restart_syscall 223
+__SYSCALL(223, sys_restart_syscall, 0)
+#define __NR_sigaltstack 224
+__SYSCALL(224, xtensa_sigaltstack, 2)
+#define __NR_rt_sigreturn 225
+__SYSCALL(225, xtensa_rt_sigreturn, 1)
+#define __NR_rt_sigaction 226
+__SYSCALL(226, sys_rt_sigaction, 4)
+#define __NR_rt_sigprocmask 227
+__SYSCALL(227, sys_rt_sigprocmask, 4)
+#define __NR_rt_sigpending 228
+__SYSCALL(228, sys_rt_sigpending, 2)
+#define __NR_rt_sigtimedwait 229
+__SYSCALL(229, sys_rt_sigtimedwait, 4)
+#define __NR_rt_sigqueueinfo 230
+__SYSCALL(230, sys_rt_sigqueueinfo, 3)
+#define __NR_rt_sigsuspend 231
+__SYSCALL(231, xtensa_rt_sigsuspend, 2)
+
+/* Message */
+
+#define __NR_mq_open 232
+__SYSCALL(232, sys_mq_open, 4)
+#define __NR_mq_unlink 233
+__SYSCALL(233, sys_mq_unlink, 1)
+#define __NR_mq_timedsend 234
+__SYSCALL(234, sys_mq_timedsend, 5)
+#define __NR_mq_timedreceive 235
+__SYSCALL(235, sys_mq_timedreceive, 5)
+#define __NR_mq_notify 236
+__SYSCALL(236, sys_mq_notify, 2)
+#define __NR_mq_getsetattr 237
+__SYSCALL(237, sys_mq_getsetattr, 3)
+#define __NR_available238 238
+__SYSCALL(238, sys_ni_syscall, 0)
+
+/* IO */
+
+#define __NR_io_setup 239
+__SYSCALL(239, sys_io_setup, 2)
+#define __NR_io_destroy 240
+__SYSCALL(240, sys_io_destroy, 1)
+#define __NR_io_submit 241
+__SYSCALL(241, sys_io_submit, 3)
+#define __NR_io_getevents 242
+__SYSCALL(242, sys_io_getevents, 5)
+#define __NR_io_cancel 243
+__SYSCALL(243, sys_io_cancel, 3)
+#define __NR_clock_settime 244
+__SYSCALL(244, sys_clock_settime, 2)
+#define __NR_clock_gettime 245
+__SYSCALL(245, sys_clock_gettime, 2)
+#define __NR_clock_getres 246
+__SYSCALL(246, sys_clock_getres, 2)
+#define __NR_clock_nanosleep 247
+__SYSCALL(247, sys_clock_nanosleep, 4)
+
+/* Timer */
+
+#define __NR_timer_create 248
+__SYSCALL(248, sys_timer_create, 3)
+#define __NR_timer_delete 249
+__SYSCALL(249, sys_timer_delete, 1)
+#define __NR_timer_settime 250
+__SYSCALL(250, sys_timer_settime, 4)
+#define __NR_timer_gettime 251
+__SYSCALL(251, sys_timer_gettime, 2)
+#define __NR_timer_getoverrun 252
+__SYSCALL(252, sys_timer_getoverrun, 1)
+
+/* System */
+
+#define __NR_reserved244 253
+__SYSCALL(253, sys_ni_syscall, 0)
+#define __NR_lookup_dcookie 254
+__SYSCALL(254, sys_lookup_dcookie, 4)
+#define __NR_available255 255
+__SYSCALL(255, sys_ni_syscall, 0)
+#define __NR_add_key 256
+__SYSCALL(256, sys_add_key, 5)
+#define __NR_request_key 257
+__SYSCALL(257, sys_request_key, 5)
+#define __NR_keyctl 258
+__SYSCALL(258, sys_keyctl, 5)
+#define __NR_available259 259
+__SYSCALL(259, sys_ni_syscall, 0)
+
+#define __NR_syscall_count 261
+
+/*
+ * sysxtensa syscall handler
+ *
+ * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
+ * a2 a6 a3 a4 a5
+ */
+
+#define SYS_XTENSA_RESERVED 0 /* don't use this */
+#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */
+#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */
+#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */
+#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */
+
+#define SYS_XTENSA_COUNT 5 /* count */
+
+#ifdef __KERNEL__
/*
* "Conditional" syscalls
#define __ARCH_WANT_SYS_UTIME
#define __ARCH_WANT_SYS_LLSEEK
#define __ARCH_WANT_SYS_RT_SIGACTION
-#endif /* __KERNEL__ */
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+#endif /* __KERNEL__ */
#endif /* _XTENSA_UNISTD_H */
+
--- /dev/null
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2006 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_H
+#define _XTENSA_CORE_H
+
+
+/****************************************************************************
+ Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ * configured, and a value of 0 otherwise. These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+ ISA
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE 1 /* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */
+#define XCHAL_NUM_AREGS 64 /* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG 1 /* debug option */
+#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */
+#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX 0 /* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT 0 /* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS 0 /* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16 0 /* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32 0 /* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */
+#define XCHAL_HAVE_L32R 1 /* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */
+#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */
+#define XCHAL_HAVE_ABS 1 /* ABS instruction */
+/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */
+/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC 0 /* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I 0 /* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION 0 /* speculation */
+#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS 1 /* */
+#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID 1 /* processor ID register */
+#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */
+#define XCHAL_HAVE_CP 0 /* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16 0 /* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */
+#define XCHAL_HAVE_FP 0 /* floating point pkg */
+#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */
+#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */
+#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */
+
+
+/*----------------------------------------------------------------------
+ MISC
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH 4 /* data width in bytes */
+/* In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/
+
+#define XCHAL_CORE_ID "fsf" /* alphanum core name
+ (CoreID) set in the Xtensa
+ Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID 0x00006700 /* 22-bit sw build ID */
+
+/*
+ * These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0 0xC103C3FF /* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1 0x0C006700 /* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME "LX2.0.0" /* full version name */
+#define XCHAL_HW_VERSION_MAJOR 2200 /* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR 0 /* minor ver# of targeted hw */
+#define XTHAL_HW_REL_LX2 1
+#define XTHAL_HW_REL_LX2_0 1
+#define XTHAL_HW_REL_LX2_0_0 1
+#define XCHAL_HW_CONFIGID_RELIABLE 1
+/* If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR 2200 /* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR 0 /* minor v of earliest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR 2200 /* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR 0 /* minor v of latest tgt hw */
+
+
+/*----------------------------------------------------------------------
+ CACHE
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE 16 /* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE 16 /* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH 4 /* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH 4 /* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE 8192 /* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE 8192 /* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK 0 /* writeback feature */
+
+
+
+
+/****************************************************************************
+ Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+ CACHE
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */
+
+/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */
+
+/* Number of cache sets in log2(lines per way): */
+#define XCHAL_ICACHE_SETWIDTH 8
+#define XCHAL_DCACHE_SETWIDTH 8
+
+/* Cache set associativity (number of ways): */
+#define XCHAL_ICACHE_WAYS 2
+#define XCHAL_DCACHE_WAYS 2
+
+/* Cache features: */
+#define XCHAL_ICACHE_LINE_LOCKABLE 0
+#define XCHAL_DCACHE_LINE_LOCKABLE 0
+#define XCHAL_ICACHE_ECC_PARITY 0
+#define XCHAL_DCACHE_ECC_PARITY 0
+
+/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */
+#define XCHAL_CA_BITS 4
+
+
+/*----------------------------------------------------------------------
+ INTERNAL I/D RAM/ROMs and XLMI
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */
+#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */
+#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */
+
+
+/*----------------------------------------------------------------------
+ INTERRUPTS and TIMERS
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI 0 /* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS 17 /* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS 10 /* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels
+ (not including level zero) */
+#define XCHAL_EXCM_LEVEL 1 /* level masked by PS.EXCM */
+ /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/* Masks of interrupts at each interrupt level: */
+#define XCHAL_INTLEVEL1_MASK 0x000064F9
+#define XCHAL_INTLEVEL2_MASK 0x00008902
+#define XCHAL_INTLEVEL3_MASK 0x00011204
+#define XCHAL_INTLEVEL4_MASK 0x00000000
+#define XCHAL_INTLEVEL5_MASK 0x00000000
+#define XCHAL_INTLEVEL6_MASK 0x00000000
+#define XCHAL_INTLEVEL7_MASK 0x00000000
+
+/* Masks of interrupts at each range 1..n of interrupt levels: */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000064F9
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x0000EDFB
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x0001FFFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x0001FFFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x0001FFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x0001FFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x0001FFFF
+
+/* Level of each interrupt: */
+#define XCHAL_INT0_LEVEL 1
+#define XCHAL_INT1_LEVEL 2
+#define XCHAL_INT2_LEVEL 3
+#define XCHAL_INT3_LEVEL 1
+#define XCHAL_INT4_LEVEL 1
+#define XCHAL_INT5_LEVEL 1
+#define XCHAL_INT6_LEVEL 1
+#define XCHAL_INT7_LEVEL 1
+#define XCHAL_INT8_LEVEL 2
+#define XCHAL_INT9_LEVEL 3
+#define XCHAL_INT10_LEVEL 1
+#define XCHAL_INT11_LEVEL 2
+#define XCHAL_INT12_LEVEL 3
+#define XCHAL_INT13_LEVEL 1
+#define XCHAL_INT14_LEVEL 1
+#define XCHAL_INT15_LEVEL 2
+#define XCHAL_INT16_LEVEL 3
+#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT 0 /* OCD external db interrupt */
+
+/* Type of each interrupt: */
+#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT12_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT13_TYPE XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT16_TYPE XTHAL_INTTYPE_SOFTWARE
+
+/* Masks of interrupts for each type of interrupt: */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFE0000
+#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0001E000
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000380
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000007F
+#define XCHAL_INTTYPE_MASK_TIMER 0x00001C00
+#define XCHAL_INTTYPE_MASK_NMI 0x00000000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000
+
+/* Interrupt numbers assigned to specific interrupt sources: */
+#define XCHAL_TIMER0_INTERRUPT 10 /* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT 11 /* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT 12 /* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED
+
+/* Interrupt numbers for levels at which only one interrupt is configured: */
+/* (There are many interrupts each at level(s) 1, 2, 3.) */
+
+
+/*
+ * External interrupt vectors/levels.
+ * These macros describe how Xtensa processor interrupt numbers
+ * (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ * map to external BInterrupt<n> pins, for those interrupts
+ * configured as external (level-triggered, edge-triggered, or NMI).
+ * See the Xtensa processor databook for more details.
+ */
+
+/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */
+#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM 1 /* (intlevel 2) */
+#define XCHAL_EXTINT2_NUM 2 /* (intlevel 3) */
+#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */
+#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */
+#define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */
+#define XCHAL_EXTINT9_NUM 9 /* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+ EXCEPTIONS and VECTORS
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture
+ number: 1 == XEA1 (old)
+ 2 == XEA2 (new)
+ 0 == XEAX (extern) */
+#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */
+#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */
+
+#define XCHAL_RESET_VECTOR_VADDR 0xFE000020
+#define XCHAL_RESET_VECTOR_PADDR 0xFE000020
+#define XCHAL_USER_VECTOR_VADDR 0xD0000220
+#define XCHAL_USER_VECTOR_PADDR 0x00000220
+#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000200
+#define XCHAL_KERNEL_VECTOR_PADDR 0x00000200
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD0000290
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x00000290
+#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000
+#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000
+#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000240
+#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000240
+#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD0000250
+#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x00000250
+#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xFE000520
+#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xFE000520
+#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+ DEBUG
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */
+#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+ MMU
+ ----------------------------------------------------------------------*/
+
+/* See <xtensa/config/core-matmap.h> header file for more details. */
+
+#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY 0 /* one way maps I+D 4GB vaddr */
+#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table
+ [autorefill] and protection)
+ usable for an MMU-based OS */
+/* If none of the above last 4 are set, it's a custom TLB configuration. */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
--- /dev/null
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2006 Tensilica Inc.
+ */
+
+#ifndef XTENSA_TIE_H
+#define XTENSA_TIE_H
+
+/*----------------------------------------------------------------------
+ COPROCESSORS and EXTRA STATE
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_CP_NUM 0 /* number of coprocessors */
+#define XCHAL_CP_MASK 0x00
+
+#endif /*XTENSA_CONFIG_TIE_H*/
+
+++ /dev/null
-#ifndef XTENSA_CACHEASM_H
-#define XTENSA_CACHEASM_H
-
-/*
- * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
- *
- * include/asm-xtensa/xtensa/cacheasm.h -- assembler-specific cache
- * related definitions that depend on CORE configuration.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002 Tensilica Inc.
- */
-
-
-#include <xtensa/coreasm.h>
-
-
-/*
- * This header file defines assembler macros of the form:
- * <x>cache_<func>
- * where <x> is 'i' or 'd' for instruction and data caches,
- * and <func> indicates the function of the macro.
- *
- * The following functions <func> are defined,
- * and apply only to the specified cache (I or D):
- *
- * reset
- * Resets the cache.
- *
- * sync
- * Makes sure any previous cache instructions have been completed;
- * ie. makes sure any previous cache control operations
- * have had full effect and been synchronized to memory.
- * Eg. any invalidate completed [so as not to generate a hit],
- * any writebacks or other pipelined writes written to memory, etc.
- *
- * invalidate_line (single cache line)
- * invalidate_region (specified memory range)
- * invalidate_all (entire cache)
- * Invalidates all cache entries that cache
- * data from the specified memory range.
- * NOTE: locked entries are not invalidated.
- *
- * writeback_line (single cache line)
- * writeback_region (specified memory range)
- * writeback_all (entire cache)
- * Writes back to memory all dirty cache entries
- * that cache data from the specified memory range,
- * and marks these entries as clean.
- * NOTE: on some future implementations, this might
- * also invalidate.
- * NOTE: locked entries are written back, but never invalidated.
- * NOTE: instruction caches never implement writeback.
- *
- * writeback_inv_line (single cache line)
- * writeback_inv_region (specified memory range)
- * writeback_inv_all (entire cache)
- * Writes back to memory all dirty cache entries
- * that cache data from the specified memory range,
- * and invalidates these entries (including all clean
- * cache entries that cache data from that range).
- * NOTE: locked entries are written back but not invalidated.
- * NOTE: instruction caches never implement writeback.
- *
- * lock_line (single cache line)
- * lock_region (specified memory range)
- * Prefetch and lock the specified memory range into cache.
- * NOTE: if any part of the specified memory range cannot
- * be locked, a ??? exception occurs. These macros don't
- * do anything special (yet anyway) to handle this situation.
- *
- * unlock_line (single cache line)
- * unlock_region (specified memory range)
- * unlock_all (entire cache)
- * Unlock cache entries that cache the specified memory range.
- * Entries not already locked are unaffected.
- */
-
-
-
-/*************************** GENERIC -- ALL CACHES ***************************/
-
-
-/*
- * The following macros assume the following cache size/parameter limits
- * in the current Xtensa core implementation:
- * cache size: 1024 bytes minimum
- * line size: 16 - 64 bytes
- * way count: 1 - 4
- *
- * Minimum entries per way (ie. per associativity) = 1024 / 64 / 4 = 4
- * Hence the assumption that each loop can execute four cache instructions.
- *
- * Correspondingly, the offset range of instructions is assumed able to cover
- * four lines, ie. offsets {0,1,2,3} * line_size are assumed valid for
- * both hit and indexed cache instructions. Ie. these offsets are all
- * valid: 0, 16, 32, 48, 64, 96, 128, 192 (for line sizes 16, 32, 64).
- * This is true of all original cache instructions
- * (dhi, ihi, dhwb, dhwbi, dii, iii) which have offsets
- * of 0 to 1020 in multiples of 4 (ie. 8 bits shifted by 2).
- * This is also true of subsequent cache instructions
- * (dhu, ihu, diu, iiu, diwb, diwbi, dpfl, ipfl) which have offsets
- * of 0 to 240 in multiples of 16 (ie. 4 bits shifted by 4).
- *
- * (Maximum cache size, currently 32k, doesn't affect the following macros.
- * Cache ways > MMU min page size cause aliasing but that's another matter.)
- */
-
-
-
-/*
- * Macro to apply an 'indexed' cache instruction to the entire cache.
- *
- * Parameters:
- * cainst instruction/ that takes an address register parameter
- * and an offset parameter (in range 0 .. 3*linesize).
- * size size of cache in bytes
- * linesize size of cache line in bytes
- * assoc_or1 number of associativities (ways/sets) in cache
- * if all sets affected by cainst,
- * or 1 if only one set (or not all sets) of the cache
- * is affected by cainst (eg. DIWB or DIWBI [not yet ISA defined]).
- * aa, ab unique address registers (temporaries)
- */
-
- .macro cache_index_all cainst, size, linesize, assoc_or1, aa, ab
-
- // Sanity-check on cache parameters:
- .ifne (\size % (\linesize * \assoc_or1 * 4))
- .err // cache configuration outside expected/supported range!
- .endif
-
- // \size byte cache, \linesize byte lines, \assoc_or1 way(s) affected by each \cainst.
- movi \aa, (\size / (\linesize * \assoc_or1 * 4))
- // Possible improvement: need only loop if \aa > 1 ;
- // however that particular condition is highly unlikely.
- movi \ab, 0 // to iterate over cache
- floop \aa, cachex\@
- \cainst \ab, 0*\linesize
- \cainst \ab, 1*\linesize
- \cainst \ab, 2*\linesize
- \cainst \ab, 3*\linesize
- addi \ab, \ab, 4*\linesize // move to next line
- floopend \aa, cachex\@
-
- .endm
-
-
-/*
- * Macro to apply a 'hit' cache instruction to a memory region,
- * ie. to any cache entries that cache a specified portion (region) of memory.
- * Takes care of the unaligned cases, ie. may apply to one
- * more cache line than $asize / lineSize if $aaddr is not aligned.
- *
- *
- * Parameters are:
- * cainst instruction/macro that takes an address register parameter
- * and an offset parameter (currently always zero)
- * and generates a cache instruction (eg. "dhi", "dhwb", "ihi", etc.)
- * linesize_log2 log2(size of cache line in bytes)
- * addr register containing start address of region (clobbered)
- * asize register containing size of the region in bytes (clobbered)
- * askew unique register used as temporary
- *
- * !?!?! 2DO: optimization: iterate max(cache_size and \asize) / linesize
- */
-
- .macro cache_hit_region cainst, linesize_log2, addr, asize, askew
-
- // Make \asize the number of iterations:
- extui \askew, \addr, 0, \linesize_log2 // get unalignment amount of \addr
- add \asize, \asize, \askew // ... and add it to \asize
- addi \asize, \asize, (1 << \linesize_log2) - 1 // round up!
- srli \asize, \asize, \linesize_log2
-
- // Iterate over region:
- floopnez \asize, cacheh\@
- \cainst \addr, 0
- addi \addr, \addr, (1 << \linesize_log2) // move to next line
- floopend \asize, cacheh\@
-
- .endm
-
-
-
-
-
-/*************************** INSTRUCTION CACHE ***************************/
-
-
-/*
- * Reset/initialize the instruction cache by simply invalidating it:
- * (need to unlock first also, if cache locking implemented):
- *
- * Parameters:
- * aa, ab unique address registers (temporaries)
- */
- .macro icache_reset aa, ab
- icache_unlock_all \aa, \ab
- icache_invalidate_all \aa, \ab
- .endm
-
-
-/*
- * Synchronize after an instruction cache operation,
- * to be sure everything is in sync with memory as to be
- * expected following any previous instruction cache control operations.
- *
- * Parameters are:
- * ar an address register (temporary) (currently unused, but may be used in future)
- */
- .macro icache_sync ar
-#if XCHAL_ICACHE_SIZE > 0
- isync
-#endif
- .endm
-
-
-
-/*
- * Invalidate a single line of the instruction cache.
- * Parameters are:
- * ar address register that contains (virtual) address to invalidate
- * (may get clobbered in a future implementation, but not currently)
- * offset (optional) offset to add to \ar to compute effective address to invalidate
- * (note: some number of lsbits are ignored)
- */
- .macro icache_invalidate_line ar, offset
-#if XCHAL_ICACHE_SIZE > 0
- ihi \ar, \offset // invalidate icache line
- /*
- * NOTE: in some version of the silicon [!!!SHOULD HAVE BEEN DOCUMENTED!!!]
- * 'ihi' doesn't work, so it had been replaced with 'iii'
- * (which would just invalidate more than it should,
- * which should be okay other than the performance hit
- * because cache locking did not exist in that version,
- * unless user somehow relies on something being cached).
- * [WHAT VERSION IS IT!!?!?
- * IS THERE ANY WAY TO TEST FOR THAT HERE, TO OUTPUT 'III' ONLY IF NEEDED!?!?].
- *
- * iii \ar, \offset
- */
- icache_sync \ar
-#endif
- .endm
-
-
-
-
-/*
- * Invalidate instruction cache entries that cache a specified portion of memory.
- * Parameters are:
- * astart start address (register gets clobbered)
- * asize size of the region in bytes (register gets clobbered)
- * ac unique register used as temporary
- */
- .macro icache_invalidate_region astart, asize, ac
-#if XCHAL_ICACHE_SIZE > 0
- // Instruction cache region invalidation:
- cache_hit_region ihi, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac
- icache_sync \ac
- // End of instruction cache region invalidation
-#endif
- .endm
-
-
-
-/*
- * Invalidate entire instruction cache.
- *
- * Parameters:
- * aa, ab unique address registers (temporaries)
- */
- .macro icache_invalidate_all aa, ab
-#if XCHAL_ICACHE_SIZE > 0
- // Instruction cache invalidation:
- cache_index_all iii, XCHAL_ICACHE_SIZE, XCHAL_ICACHE_LINESIZE, XCHAL_ICACHE_WAYS, \aa, \ab
- icache_sync \aa
- // End of instruction cache invalidation
-#endif
- .endm
-
-
-
-/*
- * Lock (prefetch & lock) a single line of the instruction cache.
- *
- * Parameters are:
- * ar address register that contains (virtual) address to lock
- * (may get clobbered in a future implementation, but not currently)
- * offset offset to add to \ar to compute effective address to lock
- * (note: some number of lsbits are ignored)
- */
- .macro icache_lock_line ar, offset
-#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE
- ipfl \ar, \offset /* prefetch and lock icache line */
- icache_sync \ar
-#endif
- .endm
-
-
-
-/*
- * Lock (prefetch & lock) a specified portion of memory into the instruction cache.
- * Parameters are:
- * astart start address (register gets clobbered)
- * asize size of the region in bytes (register gets clobbered)
- * ac unique register used as temporary
- */
- .macro icache_lock_region astart, asize, ac
-#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE
- // Instruction cache region lock:
- cache_hit_region ipfl, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac
- icache_sync \ac
- // End of instruction cache region lock
-#endif
- .endm
-
-
-
-/*
- * Unlock a single line of the instruction cache.
- *
- * Parameters are:
- * ar address register that contains (virtual) address to unlock
- * (may get clobbered in a future implementation, but not currently)
- * offset offset to add to \ar to compute effective address to unlock
- * (note: some number of lsbits are ignored)
- */
- .macro icache_unlock_line ar, offset
-#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE
- ihu \ar, \offset /* unlock icache line */
- icache_sync \ar
-#endif
- .endm
-
-
-
-/*
- * Unlock a specified portion of memory from the instruction cache.
- * Parameters are:
- * astart start address (register gets clobbered)
- * asize size of the region in bytes (register gets clobbered)
- * ac unique register used as temporary
- */
- .macro icache_unlock_region astart, asize, ac
-#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE
- // Instruction cache region unlock:
- cache_hit_region ihu, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac
- icache_sync \ac
- // End of instruction cache region unlock
-#endif
- .endm
-
-
-
-/*
- * Unlock entire instruction cache.
- *
- * Parameters:
- * aa, ab unique address registers (temporaries)
- */
- .macro icache_unlock_all aa, ab
-#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE
- // Instruction cache unlock:
- cache_index_all iiu, XCHAL_ICACHE_SIZE, XCHAL_ICACHE_LINESIZE, 1, \aa, \ab
- icache_sync \aa
- // End of instruction cache unlock
-#endif
- .endm
-
-
-
-
-
-/*************************** DATA CACHE ***************************/
-
-
-
-/*
- * Reset/initialize the data cache by simply invalidating it
- * (need to unlock first also, if cache locking implemented):
- *
- * Parameters:
- * aa, ab unique address registers (temporaries)
- */
- .macro dcache_reset aa, ab
- dcache_unlock_all \aa, \ab
- dcache_invalidate_all \aa, \ab
- .endm
-
-
-
-
-/*
- * Synchronize after a data cache operation,
- * to be sure everything is in sync with memory as to be
- * expected following any previous data cache control operations.
- *
- * Parameters are:
- * ar an address register (temporary) (currently unused, but may be used in future)
- */
- .macro dcache_sync ar
-#if XCHAL_DCACHE_SIZE > 0
- // This previous sequence errs on the conservative side (too much so); a DSYNC should be sufficient:
- //memw // synchronize data cache changes relative to subsequent memory accesses
- //isync // be conservative and ISYNC as well (just to be sure)
-
- dsync
-#endif
- .endm
-
-
-
-/*
- * Synchronize after a data store operation,
- * to be sure the stored data is completely off the processor
- * (and assuming there is no buffering outside the processor,
- * that the data is in memory). This may be required to
- * ensure that the processor's write buffers are emptied.
- * A MEMW followed by a read guarantees this, by definition.
- * We also try to make sure the read itself completes.
- *
- * Parameters are:
- * ar an address register (temporary)
- */
- .macro write_sync ar
- memw // ensure previous memory accesses are complete prior to subsequent memory accesses
- l32i \ar, sp, 0 // completing this read ensures any previous write has completed, because of MEMW
- //slot
- add \ar, \ar, \ar // use the result of the read to help ensure the read completes (in future architectures)
- .endm
-
-
-/*
- * Invalidate a single line of the data cache.
- * Parameters are:
- * ar address register that contains (virtual) address to invalidate
- * (may get clobbered in a future implementation, but not currently)
- * offset (optional) offset to add to \ar to compute effective address to invalidate
- * (note: some number of lsbits are ignored)
- */
- .macro dcache_invalidate_line ar, offset
-#if XCHAL_DCACHE_SIZE > 0
- dhi \ar, \offset
- dcache_sync \ar
-#endif
- .endm
-
-
-
-
-
-/*
- * Invalidate data cache entries that cache a specified portion of memory.
- * Parameters are:
- * astart start address (register gets clobbered)
- * asize size of the region in bytes (register gets clobbered)
- * ac unique register used as temporary
- */
- .macro dcache_invalidate_region astart, asize, ac
-#if XCHAL_DCACHE_SIZE > 0
- // Data cache region invalidation:
- cache_hit_region dhi, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac
- dcache_sync \ac
- // End of data cache region invalidation
-#endif
- .endm
-
-
-
-#if 0
-/*
- * This is a work-around for a bug in SiChip1 (???).
- * There should be a proper mechanism for not outputting
- * these instructions when not needed.
- * To enable work-around, uncomment this and replace 'dii'
- * with 'dii_s1' everywhere, eg. in dcache_invalidate_all
- * macro below.
- */
- .macro dii_s1 ar, offset
- dii \ar, \offset
- or \ar, \ar, \ar
- or \ar, \ar, \ar
- or \ar, \ar, \ar
- or \ar, \ar, \ar
- .endm
-#endif
-
-
-/*
- * Invalidate entire data cache.
- *
- * Parameters:
- * aa, ab unique address registers (temporaries)
- */
- .macro dcache_invalidate_all aa, ab
-#if XCHAL_DCACHE_SIZE > 0
- // Data cache invalidation:
- cache_index_all dii, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, XCHAL_DCACHE_WAYS, \aa, \ab
- dcache_sync \aa
- // End of data cache invalidation
-#endif
- .endm
-
-
-
-/*
- * Writeback a single line of the data cache.
- * Parameters are:
- * ar address register that contains (virtual) address to writeback
- * (may get clobbered in a future implementation, but not currently)
- * offset offset to add to \ar to compute effective address to writeback
- * (note: some number of lsbits are ignored)
- */
- .macro dcache_writeback_line ar, offset
-#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK
- dhwb \ar, \offset
- dcache_sync \ar
-#endif
- .endm
-
-
-
-/*
- * Writeback dirty data cache entries that cache a specified portion of memory.
- * Parameters are:
- * astart start address (register gets clobbered)
- * asize size of the region in bytes (register gets clobbered)
- * ac unique register used as temporary
- */
- .macro dcache_writeback_region astart, asize, ac
-#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK
- // Data cache region writeback:
- cache_hit_region dhwb, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac
- dcache_sync \ac
- // End of data cache region writeback
-#endif
- .endm
-
-
-
-/*
- * Writeback entire data cache.
- * Parameters:
- * aa, ab unique address registers (temporaries)
- */
- .macro dcache_writeback_all aa, ab
-#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK
- // Data cache writeback:
- cache_index_all diwb, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab
- dcache_sync \aa
- // End of data cache writeback
-#endif
- .endm
-
-
-
-/*
- * Writeback and invalidate a single line of the data cache.
- * Parameters are:
- * ar address register that contains (virtual) address to writeback and invalidate
- * (may get clobbered in a future implementation, but not currently)
- * offset offset to add to \ar to compute effective address to writeback and invalidate
- * (note: some number of lsbits are ignored)
- */
- .macro dcache_writeback_inv_line ar, offset
-#if XCHAL_DCACHE_SIZE > 0
- dhwbi \ar, \offset /* writeback and invalidate dcache line */
- dcache_sync \ar
-#endif
- .endm
-
-
-
-/*
- * Writeback and invalidate data cache entries that cache a specified portion of memory.
- * Parameters are:
- * astart start address (register gets clobbered)
- * asize size of the region in bytes (register gets clobbered)
- * ac unique register used as temporary
- */
- .macro dcache_writeback_inv_region astart, asize, ac
-#if XCHAL_DCACHE_SIZE > 0
- // Data cache region writeback and invalidate:
- cache_hit_region dhwbi, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac
- dcache_sync \ac
- // End of data cache region writeback and invalidate
-#endif
- .endm
-
-
-
-/*
- * Writeback and invalidate entire data cache.
- * Parameters:
- * aa, ab unique address registers (temporaries)
- */
- .macro dcache_writeback_inv_all aa, ab
-#if XCHAL_DCACHE_SIZE > 0
- // Data cache writeback and invalidate:
-#if XCHAL_DCACHE_IS_WRITEBACK
- cache_index_all diwbi, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab
- dcache_sync \aa
-#else /*writeback*/
- // Data cache does not support writeback, so just invalidate: */
- dcache_invalidate_all \aa, \ab
-#endif /*writeback*/
- // End of data cache writeback and invalidate
-#endif
- .endm
-
-
-
-
-/*
- * Lock (prefetch & lock) a single line of the data cache.
- *
- * Parameters are:
- * ar address register that contains (virtual) address to lock
- * (may get clobbered in a future implementation, but not currently)
- * offset offset to add to \ar to compute effective address to lock
- * (note: some number of lsbits are ignored)
- */
- .macro dcache_lock_line ar, offset
-#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE
- dpfl \ar, \offset /* prefetch and lock dcache line */
- dcache_sync \ar
-#endif
- .endm
-
-
-
-/*
- * Lock (prefetch & lock) a specified portion of memory into the data cache.
- * Parameters are:
- * astart start address (register gets clobbered)
- * asize size of the region in bytes (register gets clobbered)
- * ac unique register used as temporary
- */
- .macro dcache_lock_region astart, asize, ac
-#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE
- // Data cache region lock:
- cache_hit_region dpfl, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac
- dcache_sync \ac
- // End of data cache region lock
-#endif
- .endm
-
-
-
-/*
- * Unlock a single line of the data cache.
- *
- * Parameters are:
- * ar address register that contains (virtual) address to unlock
- * (may get clobbered in a future implementation, but not currently)
- * offset offset to add to \ar to compute effective address to unlock
- * (note: some number of lsbits are ignored)
- */
- .macro dcache_unlock_line ar, offset
-#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE
- dhu \ar, \offset /* unlock dcache line */
- dcache_sync \ar
-#endif
- .endm
-
-
-
-/*
- * Unlock a specified portion of memory from the data cache.
- * Parameters are:
- * astart start address (register gets clobbered)
- * asize size of the region in bytes (register gets clobbered)
- * ac unique register used as temporary
- */
- .macro dcache_unlock_region astart, asize, ac
-#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE
- // Data cache region unlock:
- cache_hit_region dhu, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac
- dcache_sync \ac
- // End of data cache region unlock
-#endif
- .endm
-
-
-
-/*
- * Unlock entire data cache.
- *
- * Parameters:
- * aa, ab unique address registers (temporaries)
- */
- .macro dcache_unlock_all aa, ab
-#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE
- // Data cache unlock:
- cache_index_all diu, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab
- dcache_sync \aa
- // End of data cache unlock
-#endif
- .endm
-
-
-#endif /*XTENSA_CACHEASM_H*/
-
+++ /dev/null
-#ifndef XTENSA_CACHEATTRASM_H
-#define XTENSA_CACHEATTRASM_H
-
-/*
- * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
- *
- * include/asm-xtensa/xtensa/cacheattrasm.h -- assembler-specific
- * CACHEATTR register related definitions that depend on CORE
- * configuration.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002 Tensilica Inc.
- */
-
-
-#include <xtensa/coreasm.h>
-
-
-/*
- * This header file defines assembler macros of the form:
- * <x>cacheattr_<func>
- * where:
- * <x> is 'i', 'd' or absent for instruction, data
- * or both caches; and
- * <func> indicates the function of the macro.
- *
- * The following functions are defined:
- *
- * icacheattr_get
- * Reads I-cache CACHEATTR into a2 (clobbers a3-a5).
- *
- * dcacheattr_get
- * Reads D-cache CACHEATTR into a2 (clobbers a3-a5).
- * (Note: for configs with a real CACHEATTR register, the
- * above two macros are identical.)
- *
- * cacheattr_set
- * Writes both I-cache and D-cache CACHEATTRs from a2 (a3-a8 clobbered).
- * Works even when changing one's own code's attributes.
- *
- * icacheattr_is_enabled label
- * Branches to \label if I-cache appears to have been enabled
- * (eg. if CACHEATTR contains a cache-enabled attribute).
- * (clobbers a2-a5,SAR)
- *
- * dcacheattr_is_enabled label
- * Branches to \label if D-cache appears to have been enabled
- * (eg. if CACHEATTR contains a cache-enabled attribute).
- * (clobbers a2-a5,SAR)
- *
- * cacheattr_is_enabled label
- * Branches to \label if either I-cache or D-cache appears to have been enabled
- * (eg. if CACHEATTR contains a cache-enabled attribute).
- * (clobbers a2-a5,SAR)
- *
- * The following macros are only defined under certain conditions:
- *
- * icacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR)
- * Writes I-cache CACHEATTR from a2 (a3-a8 clobbered).
- *
- * dcacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR)
- * Writes D-cache CACHEATTR from a2 (a3-a8 clobbered).
- */
-
-
-
-/*************************** GENERIC -- ALL CACHES ***************************/
-
-/*
- * _cacheattr_get
- *
- * (Internal macro.)
- * Returns value of CACHEATTR register (or closest equivalent) in a2.
- *
- * Entry:
- * (none)
- * Exit:
- * a2 value read from CACHEATTR
- * a3-a5 clobbered (temporaries)
- */
- .macro _cacheattr_get tlb
-#if XCHAL_HAVE_CACHEATTR
- rsr a2, CACHEATTR
-#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR
- // We have a config that "mimics" CACHEATTR using a simplified
- // "MMU" composed of a single statically-mapped way.
- // DTLB and ITLB are independent, so there's no single
- // cache attribute that can describe both. So for now
- // just return the DTLB state.
- movi a5, 0xE0000000
- movi a2, 0
- movi a3, 0
-1: add a3, a3, a5 // next segment
- r&tlb&1 a4, a3 // get PPN+CA of segment at 0xE0000000, 0xC0000000, ..., 0
- dsync // interlock???
- slli a2, a2, 4
- extui a4, a4, 0, 4 // extract CA
- or a2, a2, a4
- bnez a3, 1b
-#else
- // This macro isn't applicable to arbitrary MMU configurations.
- // Just return zero.
- movi a2, 0
-#endif
- .endm
-
- .macro icacheattr_get
- _cacheattr_get itlb
- .endm
-
- .macro dcacheattr_get
- _cacheattr_get dtlb
- .endm
-
-
-#define XCHAL_CACHEATTR_ALL_BYPASS 0x22222222 /* default (powerup/reset) value of CACHEATTR, all BYPASS
- mode (ie. disabled/bypassed caches) */
-
-#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR
-
-#define XCHAL_FCA_ENAMASK 0x001A /* bitmap of fetch attributes that require enabled icache */
-#define XCHAL_LCA_ENAMASK 0x0003 /* bitmap of load attributes that require enabled dcache */
-#define XCHAL_SCA_ENAMASK 0x0003 /* bitmap of store attributes that require enabled dcache */
-#define XCHAL_LSCA_ENAMASK (XCHAL_LCA_ENAMASK|XCHAL_SCA_ENAMASK) /* l/s attrs requiring enabled dcache */
-#define XCHAL_ALLCA_ENAMASK (XCHAL_FCA_ENAMASK|XCHAL_LSCA_ENAMASK) /* all attrs requiring enabled caches */
-
-/*
- * _cacheattr_is_enabled
- *
- * (Internal macro.)
- * Branches to \label if CACHEATTR in a2 indicates an enabled
- * cache, using mask in a3.
- *
- * Parameters:
- * label where to branch to if cache is enabled
- * Entry:
- * a2 contains CACHEATTR value used to determine whether
- * caches are enabled
- * a3 16-bit constant where each bit correspond to
- * one of the 16 possible CA values (in a CACHEATTR mask);
- * CA values that indicate the cache is enabled
- * have their corresponding bit set in this mask
- * (eg. use XCHAL_xCA_ENAMASK , above)
- * Exit:
- * a2,a4,a5 clobbered
- * SAR clobbered
- */
- .macro _cacheattr_is_enabled label
- movi a4, 8 // loop 8 times
-.Lcaife\@:
- extui a5, a2, 0, 4 // get CA nibble
- ssr a5 // index into mask according to CA...
- srl a5, a3 // ...and get CA's mask bit in a5 bit 0
- bbsi.l a5, 0, \label // if CA indicates cache enabled, jump to label
- srli a2, a2, 4 // next nibble
- addi a4, a4, -1
- bnez a4, .Lcaife\@ // loop for each nibble
- .endm
-
-#else /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */
- .macro _cacheattr_is_enabled label
- j \label // macro not applicable, assume caches always enabled
- .endm
-#endif /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */
-
-
-
-/*
- * icacheattr_is_enabled
- *
- * Branches to \label if I-cache is enabled.
- *
- * Parameters:
- * label where to branch to if icache is enabled
- * Entry:
- * (none)
- * Exit:
- * a2-a5, SAR clobbered (temporaries)
- */
- .macro icacheattr_is_enabled label
-#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR
- icacheattr_get
- movi a3, XCHAL_FCA_ENAMASK
-#endif
- _cacheattr_is_enabled \label
- .endm
-
-/*
- * dcacheattr_is_enabled
- *
- * Branches to \label if D-cache is enabled.
- *
- * Parameters:
- * label where to branch to if dcache is enabled
- * Entry:
- * (none)
- * Exit:
- * a2-a5, SAR clobbered (temporaries)
- */
- .macro dcacheattr_is_enabled label
-#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR
- dcacheattr_get
- movi a3, XCHAL_LSCA_ENAMASK
-#endif
- _cacheattr_is_enabled \label
- .endm
-
-/*
- * cacheattr_is_enabled
- *
- * Branches to \label if either I-cache or D-cache is enabled.
- *
- * Parameters:
- * label where to branch to if a cache is enabled
- * Entry:
- * (none)
- * Exit:
- * a2-a5, SAR clobbered (temporaries)
- */
- .macro cacheattr_is_enabled label
-#if XCHAL_HAVE_CACHEATTR
- rsr a2, CACHEATTR
- movi a3, XCHAL_ALLCA_ENAMASK
-#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR
- icacheattr_get
- movi a3, XCHAL_FCA_ENAMASK
- _cacheattr_is_enabled \label
- dcacheattr_get
- movi a3, XCHAL_LSCA_ENAMASK
-#endif
- _cacheattr_is_enabled \label
- .endm
-
-
-
-/*
- * The ISA does not have a defined way to change the
- * instruction cache attributes of the running code,
- * ie. of the memory area that encloses the current PC.
- * However, each micro-architecture (or class of
- * configurations within a micro-architecture)
- * provides a way to deal with this issue.
- *
- * Here are a few macros used to implement the relevant
- * approach taken.
- */
-
-#if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR
- // We have a config that "mimics" CACHEATTR using a simplified
- // "MMU" composed of a single statically-mapped way.
-
-/*
- * icacheattr_set
- *
- * Entry:
- * a2 cacheattr value to set
- * Exit:
- * a2 unchanged
- * a3-a8 clobbered (temporaries)
- */
- .macro icacheattr_set
-
- movi a5, 0xE0000000 // mask of upper 3 bits
- movi a6, 3f // PC where ITLB is set
- movi a3, 0 // start at region 0 (0 .. 7)
- and a6, a6, a5 // upper 3 bits of local PC area
- mov a7, a2 // copy a2 so it doesn't get clobbered
- j 3f
-
-# if XCHAL_HAVE_XLT_CACHEATTR
- // Can do translations, use generic method:
-1: sub a6, a3, a5 // address of some other segment
- ritlb1 a8, a6 // save its PPN+CA
- dsync // interlock??
- witlb a4, a6 // make it translate to this code area
- movi a6, 5f // where to jump into it
- isync
- sub a6, a6, a5 // adjust jump address within that other segment
- jx a6
-
- // Note that in the following code snippet, which runs at a different virtual
- // address than it is assembled for, we avoid using literals (eg. via movi/l32r)
- // just in case literals end up in a different 512 MB segment, and we avoid
- // instructions that rely on the current PC being what is expected.
- //
- .align 4
- _j 6f // this is at label '5' minus 4 bytes
- .align 4
-5: witlb a4, a3 // we're in other segment, now can write previous segment's CA
- isync
- add a6, a6, a5 // back to previous segment
- addi a6, a6, -4 // next jump label
- jx a6
-
-6: sub a6, a3, a5 // address of some other segment
- witlb a8, a6 // restore PPN+CA of other segment
- mov a6, a3 // restore a6
- isync
-# else /* XCHAL_HAVE_XLT_CACHEATTR */
- // Use micro-architecture specific method.
- // The following 4-instruction sequence is aligned such that
- // it all fits within a single I-cache line. Sixteen byte
- // alignment is sufficient for this (using XCHAL_ICACHE_LINESIZE
- // actually causes problems because that can be greater than
- // the alignment of the reset vector, where this macro is often
- // invoked, which would cause the linker to align the reset
- // vector code away from the reset vector!!).
- .align 16 /*XCHAL_ICACHE_LINESIZE*/
-1: _witlb a4, a3 // write wired PTE (CA, no PPN) of 512MB segment to ITLB
- _isync
- nop
- nop
-# endif /* XCHAL_HAVE_XLT_CACHEATTR */
- beq a3, a5, 4f // done?
-
- // Note that in the WITLB loop, we don't do any load/stores
- // (may not be an issue here, but it is important in the DTLB case).
-2: srli a7, a7, 4 // next CA
- sub a3, a3, a5 // next segment (add 0x20000000)
-3:
-# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */
- ritlb1 a8, a3 // get current PPN+CA of segment
- dsync // interlock???
- extui a4, a7, 0, 4 // extract CA to set
- srli a8, a8, 4 // clear CA but keep PPN ...
- slli a8, a8, 4 // ...
- add a4, a4, a8 // combine new CA with PPN to preserve
-# else
- extui a4, a7, 0, 4 // extract CA
-# endif
- beq a3, a6, 1b // current PC's region? if so, do it in a safe way
- witlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to ITLB
- bne a3, a5, 2b
- isync // make sure all ifetch changes take effect
-4:
- .endm // icacheattr_set
-
-
-/*
- * dcacheattr_set
- *
- * Entry:
- * a2 cacheattr value to set
- * Exit:
- * a2 unchanged
- * a3-a8 clobbered (temporaries)
- */
-
- .macro dcacheattr_set
-
- movi a5, 0xE0000000 // mask of upper 3 bits
- movi a3, 0 // start at region 0 (0 .. 7)
- mov a7, a2 // copy a2 so it doesn't get clobbered
- j 3f
- // Note that in the WDTLB loop, we don't do any load/stores
- // (including implicit l32r via movi) because it isn't safe.
-2: srli a7, a7, 4 // next CA
- sub a3, a3, a5 // next segment (add 0x20000000)
-3:
-# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */
- rdtlb1 a8, a3 // get current PPN+CA of segment
- dsync // interlock???
- extui a4, a7, 0, 4 // extract CA to set
- srli a8, a8, 4 // clear CA but keep PPN ...
- slli a8, a8, 4 // ...
- add a4, a4, a8 // combine new CA with PPN to preserve
-# else
- extui a4, a7, 0, 4 // extract CA to set
-# endif
- wdtlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to DTLB
- bne a3, a5, 2b
- dsync // make sure all data path changes take effect
- .endm // dcacheattr_set
-
-#endif /* XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */
-
-
-
-/*
- * cacheattr_set
- *
- * Macro that sets the current CACHEATTR safely
- * (both i and d) according to the current contents of a2.
- * It works even when changing the cache attributes of
- * the currently running code.
- *
- * Entry:
- * a2 cacheattr value to set
- * Exit:
- * a2 unchanged
- * a3-a8 clobbered (temporaries)
- */
- .macro cacheattr_set
-
-#if XCHAL_HAVE_CACHEATTR
-# if XCHAL_ICACHE_LINESIZE < 4
- // No i-cache, so can always safely write to CACHEATTR:
- wsr a2, CACHEATTR
-# else
- // The Athens micro-architecture, when using the old
- // exception architecture option (ie. with the CACHEATTR register)
- // allows changing the cache attributes of the running code
- // using the following exact sequence aligned to be within
- // an instruction cache line. (NOTE: using XCHAL_ICACHE_LINESIZE
- // alignment actually causes problems because that can be greater
- // than the alignment of the reset vector, where this macro is often
- // invoked, which would cause the linker to align the reset
- // vector code away from the reset vector!!).
- j 1f
- .align 16 /*XCHAL_ICACHE_LINESIZE*/ // align to within an I-cache line
-1: _wsr a2, CACHEATTR
- _isync
- nop
- nop
-# endif
-#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR
- // DTLB and ITLB are independent, but to keep semantics
- // of this macro we simply write to both.
- icacheattr_set
- dcacheattr_set
-#else
- // This macro isn't applicable to arbitrary MMU configurations.
- // Do nothing in this case.
-#endif
- .endm
-
-
-#endif /*XTENSA_CACHEATTRASM_H*/
-
+++ /dev/null
-/*
- * xtensa/config/core.h -- HAL definitions that are dependent on CORE configuration
- *
- * This header file is sometimes referred to as the "compile-time HAL" or CHAL.
- * It was generated for a specific Xtensa processor configuration.
- *
- * Source for configuration-independent binaries (which link in a
- * configuration-specific HAL library) must NEVER include this file.
- * It is perfectly normal, however, for the HAL source itself to include this file.
- */
-
-/*
- * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2.1 of the GNU Lesser General Public
- * License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Further, this software is distributed without any warranty that it is
- * free of the rightful claim of any third person regarding infringement
- * or the like. Any license provided herein, whether implied or
- * otherwise, applies only to this software file. Patent licenses, if
- * any, provided herein do not apply to combinations of this program with
- * other software, or any other product whatsoever.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
- * USA.
- */
-
-
-#ifndef XTENSA_CONFIG_CORE_H
-#define XTENSA_CONFIG_CORE_H
-
-#include <xtensa/hal.h>
-
-
-/*----------------------------------------------------------------------
- GENERAL
- ----------------------------------------------------------------------*/
-
-/*
- * Separators for macros that expand into arrays.
- * These can be predefined by files that #include this one,
- * when different separators are required.
- */
-/* Element separator for macros that expand into 1-dimensional arrays: */
-#ifndef XCHAL_SEP
-#define XCHAL_SEP ,
-#endif
-/* Array separator for macros that expand into 2-dimensional arrays: */
-#ifndef XCHAL_SEP2
-#define XCHAL_SEP2 },{
-#endif
-
-
-/*----------------------------------------------------------------------
- ENDIANNESS
- ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_BE 1
-#define XCHAL_HAVE_LE 0
-#define XCHAL_MEMORY_ORDER XTHAL_BIGENDIAN
-
-
-/*----------------------------------------------------------------------
- REGISTER WINDOWS
- ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_WINDOWED 1 /* 1 if windowed registers option configured, 0 otherwise */
-#define XCHAL_NUM_AREGS 64 /* number of physical address regs */
-#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */
-
-
-/*----------------------------------------------------------------------
- ADDRESS ALIGNMENT
- ----------------------------------------------------------------------*/
-
-/* These apply to a selected set of core load and store instructions only (see ISA): */
-#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* 1 if unaligned loads cause an exception, 0 otherwise */
-#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* 1 if unaligned stores cause an exception, 0 otherwise */
-
-
-/*----------------------------------------------------------------------
- INTERRUPTS
- ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_INTERRUPTS 1 /* 1 if interrupt option configured, 0 otherwise */
-#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* 1 if high-priority interrupt option configured, 0 otherwise */
-#define XCHAL_HAVE_HIGHLEVEL_INTERRUPTS XCHAL_HAVE_HIGHPRI_INTERRUPTS
-#define XCHAL_HAVE_NMI 0 /* 1 if NMI option configured, 0 otherwise */
-#define XCHAL_NUM_INTERRUPTS 17 /* number of interrupts */
-#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* number of bits to hold an interrupt number: roundup(log2(number of interrupts)) */
-#define XCHAL_NUM_EXTINTERRUPTS 10 /* number of external interrupts */
-#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels (not including level zero!) */
-#define XCHAL_NUM_LOWPRI_LEVELS 1 /* number of low-priority interrupt levels (always 1) */
-#define XCHAL_FIRST_HIGHPRI_LEVEL (XCHAL_NUM_LOWPRI_LEVELS+1) /* level of first high-priority interrupt (always 2) */
-#define XCHAL_EXCM_LEVEL 1 /* level of interrupts masked by PS.EXCM (XEA2 only; always 1 in T10xx);
- for XEA1, where there is no PS.EXCM, this is always 1;
- interrupts at levels FIRST_HIGHPRI <= n <= EXCM_LEVEL, if any,
- are termed "medium priority" interrupts (post T10xx only) */
-/* Note: 1 <= LOWPRI_LEVELS <= EXCM_LEVEL < DEBUGLEVEL <= NUM_INTLEVELS < NMILEVEL <= 15 */
-
-/* Masks of interrupts at each interrupt level: */
-#define XCHAL_INTLEVEL0_MASK 0x00000000
-#define XCHAL_INTLEVEL1_MASK 0x000064F9
-#define XCHAL_INTLEVEL2_MASK 0x00008902
-#define XCHAL_INTLEVEL3_MASK 0x00011204
-#define XCHAL_INTLEVEL4_MASK 0x00000000
-#define XCHAL_INTLEVEL5_MASK 0x00000000
-#define XCHAL_INTLEVEL6_MASK 0x00000000
-#define XCHAL_INTLEVEL7_MASK 0x00000000
-#define XCHAL_INTLEVEL8_MASK 0x00000000
-#define XCHAL_INTLEVEL9_MASK 0x00000000
-#define XCHAL_INTLEVEL10_MASK 0x00000000
-#define XCHAL_INTLEVEL11_MASK 0x00000000
-#define XCHAL_INTLEVEL12_MASK 0x00000000
-#define XCHAL_INTLEVEL13_MASK 0x00000000
-#define XCHAL_INTLEVEL14_MASK 0x00000000
-#define XCHAL_INTLEVEL15_MASK 0x00000000
-/* As an array of entries (eg. for C constant arrays): */
-#define XCHAL_INTLEVEL_MASKS 0x00000000 XCHAL_SEP \
- 0x000064F9 XCHAL_SEP \
- 0x00008902 XCHAL_SEP \
- 0x00011204 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000 XCHAL_SEP \
- 0x00000000
-
-/* Masks of interrupts at each range 1..n of interrupt levels: */
-#define XCHAL_INTLEVEL0_ANDBELOW_MASK 0x00000000
-#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000064F9
-#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x0000EDFB
-#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL8_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL9_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL10_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL11_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL12_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL13_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL14_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_INTLEVEL15_ANDBELOW_MASK 0x0001FFFF
-#define XCHAL_LOWPRI_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all low-priority interrupts */
-#define XCHAL_EXCM_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all interrupts masked by PS.EXCM (or CEXCM) */
-/* As an array of entries (eg. for C constant arrays): */
-#define XCHAL_INTLEVEL_ANDBELOW_MASKS 0x00000000 XCHAL_SEP \
- 0x000064F9 XCHAL_SEP \
- 0x0000EDFB XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF XCHAL_SEP \
- 0x0001FFFF
-
-/* Interrupt numbers for each interrupt level at which only one interrupt was configured: */
-/*#define XCHAL_INTLEVEL1_NUM ...more than one interrupt at this level...*/
-/*#define XCHAL_INTLEVEL2_NUM ...more than one interrupt at this level...*/
-/*#define XCHAL_INTLEVEL3_NUM ...more than one interrupt at this level...*/
-
-/* Level of each interrupt: */
-#define XCHAL_INT0_LEVEL 1
-#define XCHAL_INT1_LEVEL 2
-#define XCHAL_INT2_LEVEL 3
-#define XCHAL_INT3_LEVEL 1
-#define XCHAL_INT4_LEVEL 1
-#define XCHAL_INT5_LEVEL 1
-#define XCHAL_INT6_LEVEL 1
-#define XCHAL_INT7_LEVEL 1
-#define XCHAL_INT8_LEVEL 2
-#define XCHAL_INT9_LEVEL 3
-#define XCHAL_INT10_LEVEL 1
-#define XCHAL_INT11_LEVEL 2
-#define XCHAL_INT12_LEVEL 3
-#define XCHAL_INT13_LEVEL 1
-#define XCHAL_INT14_LEVEL 1
-#define XCHAL_INT15_LEVEL 2
-#define XCHAL_INT16_LEVEL 3
-#define XCHAL_INT17_LEVEL 0
-#define XCHAL_INT18_LEVEL 0
-#define XCHAL_INT19_LEVEL 0
-#define XCHAL_INT20_LEVEL 0
-#define XCHAL_INT21_LEVEL 0
-#define XCHAL_INT22_LEVEL 0
-#define XCHAL_INT23_LEVEL 0
-#define XCHAL_INT24_LEVEL 0
-#define XCHAL_INT25_LEVEL 0
-#define XCHAL_INT26_LEVEL 0
-#define XCHAL_INT27_LEVEL 0
-#define XCHAL_INT28_LEVEL 0
-#define XCHAL_INT29_LEVEL 0
-#define XCHAL_INT30_LEVEL 0
-#define XCHAL_INT31_LEVEL 0
-/* As an array of entries (eg. for C constant arrays): */
-#define XCHAL_INT_LEVELS 1 XCHAL_SEP \
- 2 XCHAL_SEP \
- 3 XCHAL_SEP \
- 1 XCHAL_SEP \
- 1 XCHAL_SEP \
- 1 XCHAL_SEP \
- 1 XCHAL_SEP \
- 1 XCHAL_SEP \
- 2 XCHAL_SEP \
- 3 XCHAL_SEP \
- 1 XCHAL_SEP \
- 2 XCHAL_SEP \
- 3 XCHAL_SEP \
- 1 XCHAL_SEP \
- 1 XCHAL_SEP \
- 2 XCHAL_SEP \
- 3 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0 XCHAL_SEP \
- 0
-
-/* Type of each interrupt: */
-#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE
-#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_EDGE
-#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_EDGE
-#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER
-#define XCHAL_INT11_TYPE XTHAL_INTTYPE_TIMER
-#define XCHAL_INT12_TYPE XTHAL_INTTYPE_TIMER
-#define XCHAL_INT13_TYPE XTHAL_INTTYPE_SOFTWARE
-#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE
-#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE
-#define XCHAL_INT16_TYPE XTHAL_INTTYPE_SOFTWARE
-#define XCHAL_INT17_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT18_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT19_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT20_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT21_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT22_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT23_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT24_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT25_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT26_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT27_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT28_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT29_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT30_TYPE XTHAL_INTTYPE_UNCONFIGURED
-#define XCHAL_INT31_TYPE XTHAL_INTTYPE_UNCONFIGURED
-/* As an array of entries (eg. for C constant arrays): */
-#define XCHAL_INT_TYPES XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \
- XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \
- XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \
- XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \
- XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \
- XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \
- XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \
- XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \
- XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \
- XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \
- XTHAL_INTTYPE_TIMER XCHAL_SEP \
- XTHAL_INTTYPE_TIMER XCHAL_SEP \
- XTHAL_INTTYPE_TIMER XCHAL_SEP \
- XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \
- XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \
- XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \
- XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \
- XTHAL_INTTYPE_UNCONFIGURED
-
-/* Masks of interrupts for each type of interrupt: */
-#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFE0000
-#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0001E000
-#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000380
-#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000007F
-#define XCHAL_INTTYPE_MASK_TIMER 0x00001C00
-#define XCHAL_INTTYPE_MASK_NMI 0x00000000
-/* As an array of entries (eg. for C constant arrays): */
-#define XCHAL_INTTYPE_MASKS 0xFFFE0000 XCHAL_SEP \
- 0x0001E000 XCHAL_SEP \
- 0x00000380 XCHAL_SEP \
- 0x0000007F XCHAL_SEP \
- 0x00001C00 XCHAL_SEP \
- 0x00000000
-
-/* Interrupts assigned to each timer (CCOMPARE0 to CCOMPARE3), -1 if unassigned */
-#define XCHAL_TIMER0_INTERRUPT 10
-#define XCHAL_TIMER1_INTERRUPT 11
-#define XCHAL_TIMER2_INTERRUPT 12
-#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED
-/* As an array of entries (eg. for C constant arrays): */
-#define XCHAL_TIMER_INTERRUPTS 10 XCHAL_SEP \
- 11 XCHAL_SEP \
- 12 XCHAL_SEP \
- XTHAL_TIMER_UNCONFIGURED
-
-/* Indexing macros: */
-#define _XCHAL_INTLEVEL_MASK(n) XCHAL_INTLEVEL ## n ## _MASK
-#define XCHAL_INTLEVEL_MASK(n) _XCHAL_INTLEVEL_MASK(n) /* n = 0 .. 15 */
-#define _XCHAL_INTLEVEL_ANDBELOWMASK(n) XCHAL_INTLEVEL ## n ## _ANDBELOW_MASK
-#define XCHAL_INTLEVEL_ANDBELOW_MASK(n) _XCHAL_INTLEVEL_ANDBELOWMASK(n) /* n = 0 .. 15 */
-#define _XCHAL_INT_LEVEL(n) XCHAL_INT ## n ## _LEVEL
-#define XCHAL_INT_LEVEL(n) _XCHAL_INT_LEVEL(n) /* n = 0 .. 31 */
-#define _XCHAL_INT_TYPE(n) XCHAL_INT ## n ## _TYPE
-#define XCHAL_INT_TYPE(n) _XCHAL_INT_TYPE(n) /* n = 0 .. 31 */
-#define _XCHAL_TIMER_INTERRUPT(n) XCHAL_TIMER ## n ## _INTERRUPT
-#define XCHAL_TIMER_INTERRUPT(n) _XCHAL_TIMER_INTERRUPT(n) /* n = 0 .. 3 */
-
-
-
-/*
- * External interrupt vectors/levels.
- * These macros describe how Xtensa processor interrupt numbers
- * (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
- * map to external BInterrupt<n> pins, for those interrupts
- * configured as external (level-triggered, edge-triggered, or NMI).
- * See the Xtensa processor databook for more details.
- */
-
-/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */
-#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */
-#define XCHAL_EXTINT1_NUM 1 /* (intlevel 2) */
-#define XCHAL_EXTINT2_NUM 2 /* (intlevel 3) */
-#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */
-#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */
-#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */
-#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */
-#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */
-#define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */
-#define XCHAL_EXTINT9_NUM 9 /* (intlevel 3) */
-
-/* Corresponding interrupt masks: */
-#define XCHAL_EXTINT0_MASK 0x00000001
-#define XCHAL_EXTINT1_MASK 0x00000002
-#define XCHAL_EXTINT2_MASK 0x00000004
-#define XCHAL_EXTINT3_MASK 0x00000008
-#define XCHAL_EXTINT4_MASK 0x00000010
-#define XCHAL_EXTINT5_MASK 0x00000020
-#define XCHAL_EXTINT6_MASK 0x00000040
-#define XCHAL_EXTINT7_MASK 0x00000080
-#define XCHAL_EXTINT8_MASK 0x00000100
-#define XCHAL_EXTINT9_MASK 0x00000200
-
-/* Core config interrupt levels mapped to each external interrupt: */
-#define XCHAL_EXTINT0_LEVEL 1 /* (int number 0) */
-#define XCHAL_EXTINT1_LEVEL 2 /* (int number 1) */
-#define XCHAL_EXTINT2_LEVEL 3 /* (int number 2) */
-#define XCHAL_EXTINT3_LEVEL 1 /* (int number 3) */
-#define XCHAL_EXTINT4_LEVEL 1 /* (int number 4) */
-#define XCHAL_EXTINT5_LEVEL 1 /* (int number 5) */
-#define XCHAL_EXTINT6_LEVEL 1 /* (int number 6) */
-#define XCHAL_EXTINT7_LEVEL 1 /* (int number 7) */
-#define XCHAL_EXTINT8_LEVEL 2 /* (int number 8) */
-#define XCHAL_EXTINT9_LEVEL 3 /* (int number 9) */
-
-
-/*----------------------------------------------------------------------
- EXCEPTIONS and VECTORS
- ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_EXCEPTIONS 1 /* 1 if exception option configured, 0 otherwise */
-
-#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture number: 1 for XEA1 (old), 2 for XEA2 (new) */
-#define XCHAL_HAVE_XEA1 0 /* 1 if XEA1, 0 otherwise */
-#define XCHAL_HAVE_XEA2 1 /* 1 if XEA2, 0 otherwise */
-/* For backward compatibility ONLY -- DO NOT USE (will be removed in future release): */
-#define XCHAL_HAVE_OLD_EXC_ARCH XCHAL_HAVE_XEA1 /* (DEPRECATED) 1 if old exception architecture (XEA1), 0 otherwise (eg. XEA2) */
-#define XCHAL_HAVE_EXCM XCHAL_HAVE_XEA2 /* (DEPRECATED) 1 if PS.EXCM bit exists (currently equals XCHAL_HAVE_TLBS) */
-
-#define XCHAL_RESET_VECTOR_VADDR 0xFE000020
-#define XCHAL_RESET_VECTOR_PADDR 0xFE000020
-#define XCHAL_USER_VECTOR_VADDR 0xD0000220
-#define XCHAL_PROGRAMEXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */
-#define XCHAL_USEREXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */
-#define XCHAL_USER_VECTOR_PADDR 0x00000220
-#define XCHAL_PROGRAMEXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */
-#define XCHAL_USEREXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */
-#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000200
-#define XCHAL_STACKEDEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */
-#define XCHAL_KERNELEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */
-#define XCHAL_KERNEL_VECTOR_PADDR 0x00000200
-#define XCHAL_STACKEDEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */
-#define XCHAL_KERNELEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */
-#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD0000290
-#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x00000290
-#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000
-#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000
-#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000240
-#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000240
-#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD0000250
-#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x00000250
-#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xFE000520
-#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xFE000520
-#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR
-#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR
-
-/* Indexing macros: */
-#define _XCHAL_INTLEVEL_VECTOR_VADDR(n) XCHAL_INTLEVEL ## n ## _VECTOR_VADDR
-#define XCHAL_INTLEVEL_VECTOR_VADDR(n) _XCHAL_INTLEVEL_VECTOR_VADDR(n) /* n = 0 .. 15 */
-
-/*
- * General Exception Causes
- * (values of EXCCAUSE special register set by general exceptions,
- * which vector to the user, kernel, or double-exception vectors):
- */
-#define XCHAL_EXCCAUSE_ILLEGAL_INSTRUCTION 0 /* Illegal Instruction (IllegalInstruction) */
-#define XCHAL_EXCCAUSE_SYSTEM_CALL 1 /* System Call (SystemCall) */
-#define XCHAL_EXCCAUSE_INSTRUCTION_FETCH_ERROR 2 /* Instruction Fetch Error (InstructionFetchError) */
-#define XCHAL_EXCCAUSE_LOAD_STORE_ERROR 3 /* Load Store Error (LoadStoreError) */
-#define XCHAL_EXCCAUSE_LEVEL1_INTERRUPT 4 /* Level 1 Interrupt (Level1Interrupt) */
-#define XCHAL_EXCCAUSE_ALLOCA 5 /* Stack Extension Assist (Alloca) */
-#define XCHAL_EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6 /* Integer Divide by Zero (IntegerDivideByZero) */
-#define XCHAL_EXCCAUSE_SPECULATION 7 /* Speculation (Speculation) */
-#define XCHAL_EXCCAUSE_PRIVILEGED 8 /* Privileged Instruction (Privileged) */
-#define XCHAL_EXCCAUSE_UNALIGNED 9 /* Unaligned Load Store (Unaligned) */
-#define XCHAL_EXCCAUSE_ITLB_MISS 16 /* ITlb Miss Exception (ITlbMiss) */
-#define XCHAL_EXCCAUSE_ITLB_MULTIHIT 17 /* ITlb Mutltihit Exception (ITlbMultihit) */
-#define XCHAL_EXCCAUSE_ITLB_PRIVILEGE 18 /* ITlb Privilege Exception (ITlbPrivilege) */
-#define XCHAL_EXCCAUSE_ITLB_SIZE_RESTRICTION 19 /* ITlb Size Restriction Exception (ITlbSizeRestriction) */
-#define XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20 /* Fetch Cache Attribute Exception (FetchCacheAttribute) */
-#define XCHAL_EXCCAUSE_DTLB_MISS 24 /* DTlb Miss Exception (DTlbMiss) */
-#define XCHAL_EXCCAUSE_DTLB_MULTIHIT 25 /* DTlb Multihit Exception (DTlbMultihit) */
-#define XCHAL_EXCCAUSE_DTLB_PRIVILEGE 26 /* DTlb Privilege Exception (DTlbPrivilege) */
-#define XCHAL_EXCCAUSE_DTLB_SIZE_RESTRICTION 27 /* DTlb Size Restriction Exception (DTlbSizeRestriction) */
-#define XCHAL_EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28 /* Load Cache Attribute Exception (LoadCacheAttribute) */
-#define XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE 29 /* Store Cache Attribute Exception (StoreCacheAttribute) */
-#define XCHAL_EXCCAUSE_FLOATING_POINT 40 /* Floating Point Exception (FloatingPoint) */
-
-
-
-/*----------------------------------------------------------------------
- TIMERS
- ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_CCOUNT 1 /* 1 if have CCOUNT, 0 otherwise */
-/*#define XCHAL_HAVE_TIMERS XCHAL_HAVE_CCOUNT*/
-#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */
-
-
-
-/*----------------------------------------------------------------------
- DEBUG
- ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_DEBUG 1 /* 1 if debug option configured, 0 otherwise */
-#define XCHAL_HAVE_OCD 1 /* 1 if OnChipDebug option configured, 0 otherwise */
-#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */
-#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */
-#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */
-/*DebugExternalInterrupt 0 0|1*/
-/*DebugUseDIRArray 0 0|1*/
-
-
-
-
-/*----------------------------------------------------------------------
- COPROCESSORS and EXTRA STATE
- ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_CP 0 /* 1 if coprocessor option configured (CPENABLE present) */
-#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one (per cfg) */
-
-#include <xtensa/config/tie.h>
-
-
-
-
-/*----------------------------------------------------------------------
- INTERNAL I/D RAM/ROMs and XLMI
- ----------------------------------------------------------------------*/
-
-#define XCHAL_NUM_INSTROM 0 /* number of core instruction ROMs configured */
-#define XCHAL_NUM_INSTRAM 0 /* number of core instruction RAMs configured */
-#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs configured */
-#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs configured */
-#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports configured */
-#define XCHAL_NUM_IROM XCHAL_NUM_INSTROM /* (DEPRECATED) */
-#define XCHAL_NUM_IRAM XCHAL_NUM_INSTRAM /* (DEPRECATED) */
-#define XCHAL_NUM_DROM XCHAL_NUM_DATAROM /* (DEPRECATED) */
-#define XCHAL_NUM_DRAM XCHAL_NUM_DATARAM /* (DEPRECATED) */
-
-
-
-/*----------------------------------------------------------------------
- CACHE
- ----------------------------------------------------------------------*/
-
-/* Size of the cache lines in log2(bytes): */
-#define XCHAL_ICACHE_LINEWIDTH 4
-#define XCHAL_DCACHE_LINEWIDTH 4
-/* Size of the cache lines in bytes: */
-#define XCHAL_ICACHE_LINESIZE 16
-#define XCHAL_DCACHE_LINESIZE 16
-/* Max for both I-cache and D-cache (used for general alignment): */
-#define XCHAL_CACHE_LINEWIDTH_MAX 4
-#define XCHAL_CACHE_LINESIZE_MAX 16
-
-/* Number of cache sets in log2(lines per way): */
-#define XCHAL_ICACHE_SETWIDTH 8
-#define XCHAL_DCACHE_SETWIDTH 8
-/* Max for both I-cache and D-cache (used for general cache-coherency page alignment): */
-#define XCHAL_CACHE_SETWIDTH_MAX 8
-#define XCHAL_CACHE_SETSIZE_MAX 256
-
-/* Cache set associativity (number of ways): */
-#define XCHAL_ICACHE_WAYS 2
-#define XCHAL_DCACHE_WAYS 2
-
-/* Size of the caches in bytes (ways * 2^(linewidth + setwidth)): */
-#define XCHAL_ICACHE_SIZE 8192
-#define XCHAL_DCACHE_SIZE 8192
-
-/* Cache features: */
-#define XCHAL_DCACHE_IS_WRITEBACK 0
-/* Whether cache locking feature is available: */
-#define XCHAL_ICACHE_LINE_LOCKABLE 0
-#define XCHAL_DCACHE_LINE_LOCKABLE 0
-
-/* Number of (encoded) cache attribute bits: */
-#define XCHAL_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */
-/* (The number of access mode bits (decoded cache attribute bits) is defined by the architecture; see xtensa/hal.h?) */
-
-
-/* Cache Attribute encodings -- lists of access modes for each cache attribute: */
-#define XCHAL_FCA_LIST XTHAL_FAM_EXCEPTION XCHAL_SEP \
- XTHAL_FAM_BYPASS XCHAL_SEP \
- XTHAL_FAM_EXCEPTION XCHAL_SEP \
- XTHAL_FAM_BYPASS XCHAL_SEP \
- XTHAL_FAM_EXCEPTION XCHAL_SEP \
- XTHAL_FAM_CACHED XCHAL_SEP \
- XTHAL_FAM_EXCEPTION XCHAL_SEP \
- XTHAL_FAM_CACHED XCHAL_SEP \
- XTHAL_FAM_EXCEPTION XCHAL_SEP \
- XTHAL_FAM_CACHED XCHAL_SEP \
- XTHAL_FAM_EXCEPTION XCHAL_SEP \
- XTHAL_FAM_CACHED XCHAL_SEP \
- XTHAL_FAM_EXCEPTION XCHAL_SEP \
- XTHAL_FAM_EXCEPTION XCHAL_SEP \
- XTHAL_FAM_EXCEPTION XCHAL_SEP \
- XTHAL_FAM_EXCEPTION
-#define XCHAL_LCA_LIST XTHAL_LAM_EXCEPTION XCHAL_SEP \
- XTHAL_LAM_BYPASSG XCHAL_SEP \
- XTHAL_LAM_EXCEPTION XCHAL_SEP \
- XTHAL_LAM_BYPASSG XCHAL_SEP \
- XTHAL_LAM_EXCEPTION XCHAL_SEP \
- XTHAL_LAM_CACHED XCHAL_SEP \
- XTHAL_LAM_EXCEPTION XCHAL_SEP \
- XTHAL_LAM_CACHED XCHAL_SEP \
- XTHAL_LAM_EXCEPTION XCHAL_SEP \
- XTHAL_LAM_NACACHED XCHAL_SEP \
- XTHAL_LAM_EXCEPTION XCHAL_SEP \
- XTHAL_LAM_NACACHED XCHAL_SEP \
- XTHAL_LAM_EXCEPTION XCHAL_SEP \
- XTHAL_LAM_ISOLATE XCHAL_SEP \
- XTHAL_LAM_EXCEPTION XCHAL_SEP \
- XTHAL_LAM_CACHED
-#define XCHAL_SCA_LIST XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_BYPASS XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_WRITETHRU XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_WRITETHRU XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_ISOLATE XCHAL_SEP \
- XTHAL_SAM_EXCEPTION XCHAL_SEP \
- XTHAL_SAM_WRITETHRU
-
-/* Test:
- read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14
- read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14
- all: 0 + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15
- fault: 0 + 2 + 4 + 6 + 8 + 10 + 12 + 14
- r/w/x cached:
- r/w/x dcached:
- I-bypass: 1 + 3
-
- load guard bit set: 1 + 3
- load guard bit clr: 0 + 2 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15
- hit-cache r/w/x: 7 + 11
-
- fams: 5
- fams: 0 / 6 / 18 / 1 / 2
- fams: Bypass / Isolate / Cached / Exception / NACached
-
- MMU okay: yes
-*/
-
-
-/*----------------------------------------------------------------------
- MMU
- ----------------------------------------------------------------------*/
-
-/*
- * General notes on MMU parameters.
- *
- * Terminology:
- * ASID = address-space ID (acts as an "extension" of virtual addresses)
- * VPN = virtual page number
- * PPN = physical page number
- * CA = encoded cache attribute (access modes)
- * TLB = translation look-aside buffer (term is stretched somewhat here)
- * I = instruction (fetch accesses)
- * D = data (load and store accesses)
- * way = each TLB (ITLB and DTLB) consists of a number of "ways"
- * that simultaneously match the virtual address of an access;
- * a TLB successfully translates a virtual address if exactly
- * one way matches the vaddr; if none match, it is a miss;
- * if multiple match, one gets a "multihit" exception;
- * each way can be independently configured in terms of number of
- * entries, page sizes, which fields are writable or constant, etc.
- * set = group of contiguous ways with exactly identical parameters
- * ARF = auto-refill; hardware services a 1st-level miss by loading a PTE
- * from the page table and storing it in one of the auto-refill ways;
- * if this PTE load also misses, a miss exception is posted for s/w.
- * min-wired = a "min-wired" way can be used to map a single (minimum-sized)
- * page arbitrarily under program control; it has a single entry,
- * is non-auto-refill (some other way(s) must be auto-refill),
- * all its fields (VPN, PPN, ASID, CA) are all writable, and it
- * supports the XCHAL_MMU_MIN_PTE_PAGE_SIZE page size (a current
- * restriction is that this be the only page size it supports).
- *
- * TLB way entries are virtually indexed.
- * TLB ways that support multiple page sizes:
- * - must have all writable VPN and PPN fields;
- * - can only use one page size at any given time (eg. setup at startup),
- * selected by the respective ITLBCFG or DTLBCFG special register,
- * whose bits n*4+3 .. n*4 index the list of page sizes for way n
- * (XCHAL_xTLB_SETm_PAGESZ_LOG2_LIST for set m corresponding to way n);
- * this list may be sparse for auto-refill ways because auto-refill
- * ways have independent lists of supported page sizes sharing a
- * common encoding with PTE entries; the encoding is the index into
- * this list; unsupported sizes for a given way are zero in the list;
- * selecting unsupported sizes results in undefined hardware behaviour;
- * - is only possible for ways 0 thru 7 (due to ITLBCFG/DTLBCFG definition).
- */
-
-#define XCHAL_HAVE_CACHEATTR 0 /* 1 if CACHEATTR register present, 0 if TLBs present instead */
-#define XCHAL_HAVE_TLBS 1 /* 1 if TLBs present, 0 if CACHEATTR present instead */
-#define XCHAL_HAVE_MMU XCHAL_HAVE_TLBS /* (DEPRECATED; use XCHAL_HAVE_TLBS instead; will be removed in future release) */
-#define XCHAL_HAVE_SPANNING_WAY 0 /* 1 if single way maps entire virtual address space in I+D */
-#define XCHAL_HAVE_IDENTITY_MAP 0 /* 1 if virtual addr == physical addr always, 0 otherwise */
-#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config (CaMMU) */
-#define XCHAL_HAVE_XLT_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config, but with translation (CaXltMMU) */
-
-#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs (address space IDs) */
-#define XCHAL_MMU_ASID_INVALID 0 /* ASID value indicating invalid address space */
-#define XCHAL_MMU_ASID_KERNEL 1 /* ASID value indicating kernel (ring 0) address space */
-#define XCHAL_MMU_RINGS 4 /* number of rings supported (1..4) */
-#define XCHAL_MMU_RING_BITS 2 /* number of bits needed to hold ring number */
-#define XCHAL_MMU_SR_BITS 0 /* number of size-restriction bits supported */
-#define XCHAL_MMU_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */
-#define XCHAL_MMU_MAX_PTE_PAGE_SIZE 12 /* max page size in a PTE structure (log2) */
-#define XCHAL_MMU_MIN_PTE_PAGE_SIZE 12 /* min page size in a PTE structure (log2) */
-
-
-/*** Instruction TLB: ***/
-
-#define XCHAL_ITLB_WAY_BITS 3 /* number of bits holding the ways */
-#define XCHAL_ITLB_WAYS 7 /* number of ways (n-way set-associative TLB) */
-#define XCHAL_ITLB_ARF_WAYS 4 /* number of auto-refill ways */
-#define XCHAL_ITLB_SETS 4 /* number of sets (groups of ways with identical settings) */
-
-/* Way set to which each way belongs: */
-#define XCHAL_ITLB_WAY0_SET 0
-#define XCHAL_ITLB_WAY1_SET 0
-#define XCHAL_ITLB_WAY2_SET 0
-#define XCHAL_ITLB_WAY3_SET 0
-#define XCHAL_ITLB_WAY4_SET 1
-#define XCHAL_ITLB_WAY5_SET 2
-#define XCHAL_ITLB_WAY6_SET 3
-
-/* Ways sets that are used by hardware auto-refill (ARF): */
-#define XCHAL_ITLB_ARF_SETS 1 /* number of auto-refill sets */
-#define XCHAL_ITLB_ARF_SET0 0 /* index of n'th auto-refill set */
-
-/* Way sets that are "min-wired" (see terminology comment above): */
-#define XCHAL_ITLB_MINWIRED_SETS 0 /* number of "min-wired" sets */
-
-
-/* ITLB way set 0 (group of ways 0 thru 3): */
-#define XCHAL_ITLB_SET0_WAY 0 /* index of first way in this way set */
-#define XCHAL_ITLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */
-#define XCHAL_ITLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */
-#define XCHAL_ITLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */
-#define XCHAL_ITLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */
-#define XCHAL_ITLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */
-#define XCHAL_ITLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */
-#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */
-#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */
-#define XCHAL_ITLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP;
- 2^PAGESZ_BITS entries in list, unsupported entries are zero */
-#define XCHAL_ITLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */
-#define XCHAL_ITLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */
-#define XCHAL_ITLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */
-#define XCHAL_ITLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */
-#define XCHAL_ITLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */
-
-/* ITLB way set 1 (group of ways 4 thru 4): */
-#define XCHAL_ITLB_SET1_WAY 4 /* index of first way in this way set */
-#define XCHAL_ITLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */
-#define XCHAL_ITLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */
-#define XCHAL_ITLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */
-#define XCHAL_ITLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */
-#define XCHAL_ITLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */
-#define XCHAL_ITLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */
-#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */
-#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */
-#define XCHAL_ITLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP;
- 2^PAGESZ_BITS entries in list, unsupported entries are zero */
-#define XCHAL_ITLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */
-#define XCHAL_ITLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */
-#define XCHAL_ITLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */
-#define XCHAL_ITLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */
-#define XCHAL_ITLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */
-
-/* ITLB way set 2 (group of ways 5 thru 5): */
-#define XCHAL_ITLB_SET2_WAY 5 /* index of first way in this way set */
-#define XCHAL_ITLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */
-#define XCHAL_ITLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */
-#define XCHAL_ITLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */
-#define XCHAL_ITLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */
-#define XCHAL_ITLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */
-#define XCHAL_ITLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */
-#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */
-#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */
-#define XCHAL_ITLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP;
- 2^PAGESZ_BITS entries in list, unsupported entries are zero */
-#define XCHAL_ITLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */
-#define XCHAL_ITLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */
-#define XCHAL_ITLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */
-#define XCHAL_ITLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */
-#define XCHAL_ITLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */
-/* Constant ASID values for each entry of ITLB way set 2 (because ASID_CONSTMASK is non-zero): */
-#define XCHAL_ITLB_SET2_E0_ASID_CONST 0x01
-#define XCHAL_ITLB_SET2_E1_ASID_CONST 0x01
-/* Constant VPN values for each entry of ITLB way set 2 (because VPN_CONSTMASK is non-zero): */
-#define XCHAL_ITLB_SET2_E0_VPN_CONST 0xD0000000
-#define XCHAL_ITLB_SET2_E1_VPN_CONST 0xD8000000
-/* Constant PPN values for each entry of ITLB way set 2 (because PPN_CONSTMASK is non-zero): */
-#define XCHAL_ITLB_SET2_E0_PPN_CONST 0x00000000
-#define XCHAL_ITLB_SET2_E1_PPN_CONST 0x00000000
-/* Constant CA values for each entry of ITLB way set 2 (because CA_CONSTMASK is non-zero): */
-#define XCHAL_ITLB_SET2_E0_CA_CONST 0x07
-#define XCHAL_ITLB_SET2_E1_CA_CONST 0x03
-
-/* ITLB way set 3 (group of ways 6 thru 6): */
-#define XCHAL_ITLB_SET3_WAY 6 /* index of first way in this way set */
-#define XCHAL_ITLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */
-#define XCHAL_ITLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */
-#define XCHAL_ITLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */
-#define XCHAL_ITLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */
-#define XCHAL_ITLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */
-#define XCHAL_ITLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */
-#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */
-#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */
-#define XCHAL_ITLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP;
- 2^PAGESZ_BITS entries in list, unsupported entries are zero */
-#define XCHAL_ITLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */
-#define XCHAL_ITLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */
-#define XCHAL_ITLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */
-#define XCHAL_ITLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */
-#define XCHAL_ITLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_ITLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */
-/* Constant ASID values for each entry of ITLB way set 3 (because ASID_CONSTMASK is non-zero): */
-#define XCHAL_ITLB_SET3_E0_ASID_CONST 0x01
-#define XCHAL_ITLB_SET3_E1_ASID_CONST 0x01
-/* Constant VPN values for each entry of ITLB way set 3 (because VPN_CONSTMASK is non-zero): */
-#define XCHAL_ITLB_SET3_E0_VPN_CONST 0xE0000000
-#define XCHAL_ITLB_SET3_E1_VPN_CONST 0xF0000000
-/* Constant PPN values for each entry of ITLB way set 3 (because PPN_CONSTMASK is non-zero): */
-#define XCHAL_ITLB_SET3_E0_PPN_CONST 0xF0000000
-#define XCHAL_ITLB_SET3_E1_PPN_CONST 0xF0000000
-/* Constant CA values for each entry of ITLB way set 3 (because CA_CONSTMASK is non-zero): */
-#define XCHAL_ITLB_SET3_E0_CA_CONST 0x07
-#define XCHAL_ITLB_SET3_E1_CA_CONST 0x03
-
-/* Indexing macros: */
-#define _XCHAL_ITLB_SET(n,_what) XCHAL_ITLB_SET ## n ## _what
-#define XCHAL_ITLB_SET(n,what) _XCHAL_ITLB_SET(n, _ ## what )
-#define _XCHAL_ITLB_SET_E(n,i,_what) XCHAL_ITLB_SET ## n ## _E ## i ## _what
-#define XCHAL_ITLB_SET_E(n,i,what) _XCHAL_ITLB_SET_E(n,i, _ ## what )
-/*
- * Example use: XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES)
- * to get the value of XCHAL_ITLB_SET<n>_ENTRIES where <n> is the first auto-refill set.
- */
-
-
-/*** Data TLB: ***/
-
-#define XCHAL_DTLB_WAY_BITS 4 /* number of bits holding the ways */
-#define XCHAL_DTLB_WAYS 10 /* number of ways (n-way set-associative TLB) */
-#define XCHAL_DTLB_ARF_WAYS 4 /* number of auto-refill ways */
-#define XCHAL_DTLB_SETS 5 /* number of sets (groups of ways with identical settings) */
-
-/* Way set to which each way belongs: */
-#define XCHAL_DTLB_WAY0_SET 0
-#define XCHAL_DTLB_WAY1_SET 0
-#define XCHAL_DTLB_WAY2_SET 0
-#define XCHAL_DTLB_WAY3_SET 0
-#define XCHAL_DTLB_WAY4_SET 1
-#define XCHAL_DTLB_WAY5_SET 2
-#define XCHAL_DTLB_WAY6_SET 3
-#define XCHAL_DTLB_WAY7_SET 4
-#define XCHAL_DTLB_WAY8_SET 4
-#define XCHAL_DTLB_WAY9_SET 4
-
-/* Ways sets that are used by hardware auto-refill (ARF): */
-#define XCHAL_DTLB_ARF_SETS 1 /* number of auto-refill sets */
-#define XCHAL_DTLB_ARF_SET0 0 /* index of n'th auto-refill set */
-
-/* Way sets that are "min-wired" (see terminology comment above): */
-#define XCHAL_DTLB_MINWIRED_SETS 1 /* number of "min-wired" sets */
-#define XCHAL_DTLB_MINWIRED_SET0 4 /* index of n'th "min-wired" set */
-
-
-/* DTLB way set 0 (group of ways 0 thru 3): */
-#define XCHAL_DTLB_SET0_WAY 0 /* index of first way in this way set */
-#define XCHAL_DTLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */
-#define XCHAL_DTLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */
-#define XCHAL_DTLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */
-#define XCHAL_DTLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */
-#define XCHAL_DTLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */
-#define XCHAL_DTLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */
-#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */
-#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */
-#define XCHAL_DTLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP;
- 2^PAGESZ_BITS entries in list, unsupported entries are zero */
-#define XCHAL_DTLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */
-#define XCHAL_DTLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */
-#define XCHAL_DTLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */
-
-/* DTLB way set 1 (group of ways 4 thru 4): */
-#define XCHAL_DTLB_SET1_WAY 4 /* index of first way in this way set */
-#define XCHAL_DTLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */
-#define XCHAL_DTLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */
-#define XCHAL_DTLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */
-#define XCHAL_DTLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */
-#define XCHAL_DTLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */
-#define XCHAL_DTLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */
-#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */
-#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */
-#define XCHAL_DTLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP;
- 2^PAGESZ_BITS entries in list, unsupported entries are zero */
-#define XCHAL_DTLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */
-#define XCHAL_DTLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */
-#define XCHAL_DTLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */
-
-/* DTLB way set 2 (group of ways 5 thru 5): */
-#define XCHAL_DTLB_SET2_WAY 5 /* index of first way in this way set */
-#define XCHAL_DTLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */
-#define XCHAL_DTLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */
-#define XCHAL_DTLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */
-#define XCHAL_DTLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */
-#define XCHAL_DTLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */
-#define XCHAL_DTLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */
-#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */
-#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */
-#define XCHAL_DTLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP;
- 2^PAGESZ_BITS entries in list, unsupported entries are zero */
-#define XCHAL_DTLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */
-#define XCHAL_DTLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */
-#define XCHAL_DTLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */
-/* Constant ASID values for each entry of DTLB way set 2 (because ASID_CONSTMASK is non-zero): */
-#define XCHAL_DTLB_SET2_E0_ASID_CONST 0x01
-#define XCHAL_DTLB_SET2_E1_ASID_CONST 0x01
-/* Constant VPN values for each entry of DTLB way set 2 (because VPN_CONSTMASK is non-zero): */
-#define XCHAL_DTLB_SET2_E0_VPN_CONST 0xD0000000
-#define XCHAL_DTLB_SET2_E1_VPN_CONST 0xD8000000
-/* Constant PPN values for each entry of DTLB way set 2 (because PPN_CONSTMASK is non-zero): */
-#define XCHAL_DTLB_SET2_E0_PPN_CONST 0x00000000
-#define XCHAL_DTLB_SET2_E1_PPN_CONST 0x00000000
-/* Constant CA values for each entry of DTLB way set 2 (because CA_CONSTMASK is non-zero): */
-#define XCHAL_DTLB_SET2_E0_CA_CONST 0x07
-#define XCHAL_DTLB_SET2_E1_CA_CONST 0x03
-
-/* DTLB way set 3 (group of ways 6 thru 6): */
-#define XCHAL_DTLB_SET3_WAY 6 /* index of first way in this way set */
-#define XCHAL_DTLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */
-#define XCHAL_DTLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */
-#define XCHAL_DTLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */
-#define XCHAL_DTLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */
-#define XCHAL_DTLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */
-#define XCHAL_DTLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */
-#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */
-#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */
-#define XCHAL_DTLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP;
- 2^PAGESZ_BITS entries in list, unsupported entries are zero */
-#define XCHAL_DTLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */
-#define XCHAL_DTLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */
-#define XCHAL_DTLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */
-/* Constant ASID values for each entry of DTLB way set 3 (because ASID_CONSTMASK is non-zero): */
-#define XCHAL_DTLB_SET3_E0_ASID_CONST 0x01
-#define XCHAL_DTLB_SET3_E1_ASID_CONST 0x01
-/* Constant VPN values for each entry of DTLB way set 3 (because VPN_CONSTMASK is non-zero): */
-#define XCHAL_DTLB_SET3_E0_VPN_CONST 0xE0000000
-#define XCHAL_DTLB_SET3_E1_VPN_CONST 0xF0000000
-/* Constant PPN values for each entry of DTLB way set 3 (because PPN_CONSTMASK is non-zero): */
-#define XCHAL_DTLB_SET3_E0_PPN_CONST 0xF0000000
-#define XCHAL_DTLB_SET3_E1_PPN_CONST 0xF0000000
-/* Constant CA values for each entry of DTLB way set 3 (because CA_CONSTMASK is non-zero): */
-#define XCHAL_DTLB_SET3_E0_CA_CONST 0x07
-#define XCHAL_DTLB_SET3_E1_CA_CONST 0x03
-
-/* DTLB way set 4 (group of ways 7 thru 9): */
-#define XCHAL_DTLB_SET4_WAY 7 /* index of first way in this way set */
-#define XCHAL_DTLB_SET4_WAYS 3 /* number of (contiguous) ways in this way set */
-#define XCHAL_DTLB_SET4_ENTRIES_LOG2 0 /* log2(number of entries in this way) */
-#define XCHAL_DTLB_SET4_ENTRIES 1 /* number of entries in this way (always a power of 2) */
-#define XCHAL_DTLB_SET4_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */
-#define XCHAL_DTLB_SET4_PAGESIZES 1 /* number of supported page sizes in this way */
-#define XCHAL_DTLB_SET4_PAGESZ_BITS 0 /* number of bits to encode the page size */
-#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */
-#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */
-#define XCHAL_DTLB_SET4_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP;
- 2^PAGESZ_BITS entries in list, unsupported entries are zero */
-#define XCHAL_DTLB_SET4_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */
-#define XCHAL_DTLB_SET4_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET4_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */
-#define XCHAL_DTLB_SET4_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */
-#define XCHAL_DTLB_SET4_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET4_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET4_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */
-#define XCHAL_DTLB_SET4_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */
-
-/* Indexing macros: */
-#define _XCHAL_DTLB_SET(n,_what) XCHAL_DTLB_SET ## n ## _what
-#define XCHAL_DTLB_SET(n,what) _XCHAL_DTLB_SET(n, _ ## what )
-#define _XCHAL_DTLB_SET_E(n,i,_what) XCHAL_DTLB_SET ## n ## _E ## i ## _what
-#define XCHAL_DTLB_SET_E(n,i,what) _XCHAL_DTLB_SET_E(n,i, _ ## what )
-/*
- * Example use: XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,ENTRIES)
- * to get the value of XCHAL_DTLB_SET<n>_ENTRIES where <n> is the first auto-refill set.
- */
-
-
-/*
- * Determine whether we have a full MMU (with Page Table and Protection)
- * usable for an MMU-based OS:
- */
-#if XCHAL_HAVE_TLBS && !XCHAL_HAVE_SPANNING_WAY && XCHAL_ITLB_ARF_WAYS > 0 && XCHAL_DTLB_ARF_WAYS > 0 && XCHAL_MMU_RINGS >= 2
-# define XCHAL_HAVE_PTP_MMU 1 /* have full MMU (with page table [autorefill] and protection) */
-#else
-# define XCHAL_HAVE_PTP_MMU 0 /* don't have full MMU */
-#endif
-
-/*
- * For full MMUs, report kernel RAM segment and kernel I/O segment static page mappings:
- */
-#if XCHAL_HAVE_PTP_MMU
-#define XCHAL_KSEG_CACHED_VADDR 0xD0000000 /* virt.addr of kernel RAM cached static map */
-#define XCHAL_KSEG_CACHED_PADDR 0x00000000 /* phys.addr of kseg_cached */
-#define XCHAL_KSEG_CACHED_SIZE 0x08000000 /* size in bytes of kseg_cached (assumed power of 2!!!) */
-#define XCHAL_KSEG_BYPASS_VADDR 0xD8000000 /* virt.addr of kernel RAM bypass (uncached) static map */
-#define XCHAL_KSEG_BYPASS_PADDR 0x00000000 /* phys.addr of kseg_bypass */
-#define XCHAL_KSEG_BYPASS_SIZE 0x08000000 /* size in bytes of kseg_bypass (assumed power of 2!!!) */
-
-#define XCHAL_KIO_CACHED_VADDR 0xE0000000 /* virt.addr of kernel I/O cached static map */
-#define XCHAL_KIO_CACHED_PADDR 0xF0000000 /* phys.addr of kio_cached */
-#define XCHAL_KIO_CACHED_SIZE 0x10000000 /* size in bytes of kio_cached (assumed power of 2!!!) */
-#define XCHAL_KIO_BYPASS_VADDR 0xF0000000 /* virt.addr of kernel I/O bypass (uncached) static map */
-#define XCHAL_KIO_BYPASS_PADDR 0xF0000000 /* phys.addr of kio_bypass */
-#define XCHAL_KIO_BYPASS_SIZE 0x10000000 /* size in bytes of kio_bypass (assumed power of 2!!!) */
-
-#define XCHAL_SEG_MAPPABLE_VADDR 0x00000000 /* start of largest non-static-mapped virtual addr area */
-#define XCHAL_SEG_MAPPABLE_SIZE 0xD0000000 /* size in bytes of " */
-/* define XCHAL_SEG_MAPPABLE2_xxx if more areas present, sorted in order of descending size. */
-#endif
-
-
-/*----------------------------------------------------------------------
- MISC
- ----------------------------------------------------------------------*/
-
-#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* number of write buffer entries */
-
-#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier
- (CoreID) set in the Xtensa Processor Generator */
-
-#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */
-
-/* These definitions describe the hardware targeted by this software: */
-#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */
-#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */
-#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */
-#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */
-#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */
-#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */
-#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */
-#define XTHAL_HW_REL_T1050 1
-#define XTHAL_HW_REL_T1050_1 1
-#define XCHAL_HW_CONFIGID_RELIABLE 1
-
-
-/*
- * Miscellaneous special register fields:
- */
-
-
-/* DBREAKC (special register number 160): */
-#define XCHAL_DBREAKC_VALIDMASK 0xC000003F /* bits of DBREAKC that are defined */
-/* MASK field: */
-#define XCHAL_DBREAKC_MASK_BITS 6 /* number of bits in MASK field */
-#define XCHAL_DBREAKC_MASK_NUM 64 /* max number of possible causes (2^bits) */
-#define XCHAL_DBREAKC_MASK_SHIFT 0 /* position of MASK bits in DBREAKC, starting from lsbit */
-#define XCHAL_DBREAKC_MASK_MASK 0x0000003F /* mask of bits in MASK field of DBREAKC */
-/* LOADBREAK field: */
-#define XCHAL_DBREAKC_LOADBREAK_BITS 1 /* number of bits in LOADBREAK field */
-#define XCHAL_DBREAKC_LOADBREAK_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_DBREAKC_LOADBREAK_SHIFT 30 /* position of LOADBREAK bits in DBREAKC, starting from lsbit */
-#define XCHAL_DBREAKC_LOADBREAK_MASK 0x40000000 /* mask of bits in LOADBREAK field of DBREAKC */
-/* STOREBREAK field: */
-#define XCHAL_DBREAKC_STOREBREAK_BITS 1 /* number of bits in STOREBREAK field */
-#define XCHAL_DBREAKC_STOREBREAK_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_DBREAKC_STOREBREAK_SHIFT 31 /* position of STOREBREAK bits in DBREAKC, starting from lsbit */
-#define XCHAL_DBREAKC_STOREBREAK_MASK 0x80000000 /* mask of bits in STOREBREAK field of DBREAKC */
-
-/* PS (special register number 230): */
-#define XCHAL_PS_VALIDMASK 0x00070FFF /* bits of PS that are defined */
-/* INTLEVEL field: */
-#define XCHAL_PS_INTLEVEL_BITS 4 /* number of bits in INTLEVEL field */
-#define XCHAL_PS_INTLEVEL_NUM 16 /* max number of possible causes (2^bits) */
-#define XCHAL_PS_INTLEVEL_SHIFT 0 /* position of INTLEVEL bits in PS, starting from lsbit */
-#define XCHAL_PS_INTLEVEL_MASK 0x0000000F /* mask of bits in INTLEVEL field of PS */
-/* EXCM field: */
-#define XCHAL_PS_EXCM_BITS 1 /* number of bits in EXCM field */
-#define XCHAL_PS_EXCM_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_PS_EXCM_SHIFT 4 /* position of EXCM bits in PS, starting from lsbit */
-#define XCHAL_PS_EXCM_MASK 0x00000010 /* mask of bits in EXCM field of PS */
-/* PROGSTACK field: */
-#define XCHAL_PS_PROGSTACK_BITS 1 /* number of bits in PROGSTACK field */
-#define XCHAL_PS_PROGSTACK_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_PS_PROGSTACK_SHIFT 5 /* position of PROGSTACK bits in PS, starting from lsbit */
-#define XCHAL_PS_PROGSTACK_MASK 0x00000020 /* mask of bits in PROGSTACK field of PS */
-/* RING field: */
-#define XCHAL_PS_RING_BITS 2 /* number of bits in RING field */
-#define XCHAL_PS_RING_NUM 4 /* max number of possible causes (2^bits) */
-#define XCHAL_PS_RING_SHIFT 6 /* position of RING bits in PS, starting from lsbit */
-#define XCHAL_PS_RING_MASK 0x000000C0 /* mask of bits in RING field of PS */
-/* OWB field: */
-#define XCHAL_PS_OWB_BITS 4 /* number of bits in OWB field */
-#define XCHAL_PS_OWB_NUM 16 /* max number of possible causes (2^bits) */
-#define XCHAL_PS_OWB_SHIFT 8 /* position of OWB bits in PS, starting from lsbit */
-#define XCHAL_PS_OWB_MASK 0x00000F00 /* mask of bits in OWB field of PS */
-/* CALLINC field: */
-#define XCHAL_PS_CALLINC_BITS 2 /* number of bits in CALLINC field */
-#define XCHAL_PS_CALLINC_NUM 4 /* max number of possible causes (2^bits) */
-#define XCHAL_PS_CALLINC_SHIFT 16 /* position of CALLINC bits in PS, starting from lsbit */
-#define XCHAL_PS_CALLINC_MASK 0x00030000 /* mask of bits in CALLINC field of PS */
-/* WOE field: */
-#define XCHAL_PS_WOE_BITS 1 /* number of bits in WOE field */
-#define XCHAL_PS_WOE_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_PS_WOE_SHIFT 18 /* position of WOE bits in PS, starting from lsbit */
-#define XCHAL_PS_WOE_MASK 0x00040000 /* mask of bits in WOE field of PS */
-
-/* EXCCAUSE (special register number 232): */
-#define XCHAL_EXCCAUSE_VALIDMASK 0x0000003F /* bits of EXCCAUSE that are defined */
-/* EXCCAUSE field: */
-#define XCHAL_EXCCAUSE_BITS 6 /* number of bits in EXCCAUSE register */
-#define XCHAL_EXCCAUSE_NUM 64 /* max number of possible causes (2^bits) */
-#define XCHAL_EXCCAUSE_SHIFT 0 /* position of EXCCAUSE bits in register, starting from lsbit */
-#define XCHAL_EXCCAUSE_MASK 0x0000003F /* mask of bits in EXCCAUSE register */
-
-/* DEBUGCAUSE (special register number 233): */
-#define XCHAL_DEBUGCAUSE_VALIDMASK 0x0000003F /* bits of DEBUGCAUSE that are defined */
-/* ICOUNT field: */
-#define XCHAL_DEBUGCAUSE_ICOUNT_BITS 1 /* number of bits in ICOUNT field */
-#define XCHAL_DEBUGCAUSE_ICOUNT_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_DEBUGCAUSE_ICOUNT_SHIFT 0 /* position of ICOUNT bits in DEBUGCAUSE, starting from lsbit */
-#define XCHAL_DEBUGCAUSE_ICOUNT_MASK 0x00000001 /* mask of bits in ICOUNT field of DEBUGCAUSE */
-/* IBREAK field: */
-#define XCHAL_DEBUGCAUSE_IBREAK_BITS 1 /* number of bits in IBREAK field */
-#define XCHAL_DEBUGCAUSE_IBREAK_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_DEBUGCAUSE_IBREAK_SHIFT 1 /* position of IBREAK bits in DEBUGCAUSE, starting from lsbit */
-#define XCHAL_DEBUGCAUSE_IBREAK_MASK 0x00000002 /* mask of bits in IBREAK field of DEBUGCAUSE */
-/* DBREAK field: */
-#define XCHAL_DEBUGCAUSE_DBREAK_BITS 1 /* number of bits in DBREAK field */
-#define XCHAL_DEBUGCAUSE_DBREAK_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_DEBUGCAUSE_DBREAK_SHIFT 2 /* position of DBREAK bits in DEBUGCAUSE, starting from lsbit */
-#define XCHAL_DEBUGCAUSE_DBREAK_MASK 0x00000004 /* mask of bits in DBREAK field of DEBUGCAUSE */
-/* BREAK field: */
-#define XCHAL_DEBUGCAUSE_BREAK_BITS 1 /* number of bits in BREAK field */
-#define XCHAL_DEBUGCAUSE_BREAK_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_DEBUGCAUSE_BREAK_SHIFT 3 /* position of BREAK bits in DEBUGCAUSE, starting from lsbit */
-#define XCHAL_DEBUGCAUSE_BREAK_MASK 0x00000008 /* mask of bits in BREAK field of DEBUGCAUSE */
-/* BREAKN field: */
-#define XCHAL_DEBUGCAUSE_BREAKN_BITS 1 /* number of bits in BREAKN field */
-#define XCHAL_DEBUGCAUSE_BREAKN_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_DEBUGCAUSE_BREAKN_SHIFT 4 /* position of BREAKN bits in DEBUGCAUSE, starting from lsbit */
-#define XCHAL_DEBUGCAUSE_BREAKN_MASK 0x00000010 /* mask of bits in BREAKN field of DEBUGCAUSE */
-/* DEBUGINT field: */
-#define XCHAL_DEBUGCAUSE_DEBUGINT_BITS 1 /* number of bits in DEBUGINT field */
-#define XCHAL_DEBUGCAUSE_DEBUGINT_NUM 2 /* max number of possible causes (2^bits) */
-#define XCHAL_DEBUGCAUSE_DEBUGINT_SHIFT 5 /* position of DEBUGINT bits in DEBUGCAUSE, starting from lsbit */
-#define XCHAL_DEBUGCAUSE_DEBUGINT_MASK 0x00000020 /* mask of bits in DEBUGINT field of DEBUGCAUSE */
-
-
-
-/*----------------------------------------------------------------------
- ISA
- ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_DENSITY 1 /* 1 if density option configured, 0 otherwise */
-#define XCHAL_HAVE_LOOPS 1 /* 1 if zero-overhead loops option configured, 0 otherwise */
-/* Misc instructions: */
-#define XCHAL_HAVE_NSA 0 /* 1 if NSA/NSAU instructions option configured, 0 otherwise */
-#define XCHAL_HAVE_MINMAX 0 /* 1 if MIN/MAX instructions option configured, 0 otherwise */
-#define XCHAL_HAVE_SEXT 0 /* 1 if sign-extend instruction option configured, 0 otherwise */
-#define XCHAL_HAVE_CLAMPS 0 /* 1 if CLAMPS instruction option configured, 0 otherwise */
-#define XCHAL_HAVE_MAC16 0 /* 1 if MAC16 option configured, 0 otherwise */
-#define XCHAL_HAVE_MUL16 0 /* 1 if 16-bit integer multiply option configured, 0 otherwise */
-/*#define XCHAL_HAVE_POPC 0*/ /* 1 if CRC instruction option configured, 0 otherwise */
-/*#define XCHAL_HAVE_CRC 0*/ /* 1 if POPC instruction option configured, 0 otherwise */
-
-#define XCHAL_HAVE_SPECULATION 0 /* 1 if speculation option configured, 0 otherwise */
-/*#define XCHAL_HAVE_MP_SYNC 0*/ /* 1 if multiprocessor sync. option configured, 0 otherwise */
-#define XCHAL_HAVE_PRID 0 /* 1 if processor ID register configured, 0 otherwise */
-
-#define XCHAL_NUM_MISC_REGS 2 /* number of miscellaneous registers (0..4) */
-
-/* These relate a bit more to TIE: */
-#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */
-#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */
-#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */
-#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */
-
-
-/*----------------------------------------------------------------------
- DERIVED
- ----------------------------------------------------------------------*/
-
-#if XCHAL_HAVE_BE
-#define XCHAL_INST_ILLN 0xD60F /* 2-byte illegal instruction, msb-first */
-#define XCHAL_INST_ILLN_BYTE0 0xD6 /* 2-byte illegal instruction, 1st byte */
-#define XCHAL_INST_ILLN_BYTE1 0x0F /* 2-byte illegal instruction, 2nd byte */
-#else
-#define XCHAL_INST_ILLN 0xF06D /* 2-byte illegal instruction, lsb-first */
-#define XCHAL_INST_ILLN_BYTE0 0x6D /* 2-byte illegal instruction, 1st byte */
-#define XCHAL_INST_ILLN_BYTE1 0xF0 /* 2-byte illegal instruction, 2nd byte */
-#endif
-/* Belongs in xtensa/hal.h: */
-#define XTHAL_INST_ILL 0x000000 /* 3-byte illegal instruction */
-
-
-/*
- * Because information as to exactly which hardware release is targeted
- * by a given software build is not always available, compile-time HAL
- * Hardware-Release "_AT" macros are fuzzy (return 0, 1, or XCHAL_MAYBE):
- */
-#ifndef XCHAL_HW_RELEASE_MAJOR
-# define XCHAL_HW_CONFIGID_RELIABLE 0
-#endif
-#if XCHAL_HW_CONFIGID_RELIABLE
-# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) (XTHAL_REL_LE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0)
-# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) (XTHAL_REL_GE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0)
-# define XCHAL_HW_RELEASE_AT(major,minor) (XTHAL_REL_EQ( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0)
-# define XCHAL_HW_RELEASE_MAJOR_AT(major) ((XCHAL_HW_RELEASE_MAJOR == (major)) ? 1 : 0)
-#else
-# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) ( ((major) < 1040 && XCHAL_HAVE_XEA2) ? 0 \
- : ((major) > 1050 && XCHAL_HAVE_XEA1) ? 1 \
- : XTHAL_MAYBE )
-# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) ( ((major) >= 2000 && XCHAL_HAVE_XEA1) ? 0 \
- : (XTHAL_REL_LE(major,minor, 1040,0) && XCHAL_HAVE_XEA2) ? 1 \
- : XTHAL_MAYBE )
-# define XCHAL_HW_RELEASE_AT(major,minor) ( (((major) < 1040 && XCHAL_HAVE_XEA2) || \
- ((major) >= 2000 && XCHAL_HAVE_XEA1)) ? 0 : XTHAL_MAYBE)
-# define XCHAL_HW_RELEASE_MAJOR_AT(major) XCHAL_HW_RELEASE_AT(major,0)
-#endif
-
-/*
- * Specific errata:
- */
-
-/*
- * Erratum T1020.H13, T1030.H7, T1040.H10, T1050.H4 (fixed in T1040.3 and T1050.1;
- * relevant only in XEA1, kernel-vector mode, level-one interrupts and overflows enabled):
- */
-#define XCHAL_MAYHAVE_ERRATUM_XEA1KWIN (XCHAL_HAVE_XEA1 && \
- (XCHAL_HW_RELEASE_AT_OR_BELOW(1040,2) != 0 \
- || XCHAL_HW_RELEASE_AT(1050,0)))
-
-
-
-#endif /*XTENSA_CONFIG_CORE_H*/
-
+++ /dev/null
-/* Definitions for Xtensa instructions, types, and protos. */
-
-/*
- * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2.1 of the GNU Lesser General Public
- * License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Further, this software is distributed without any warranty that it is
- * free of the rightful claim of any third person regarding infringement
- * or the like. Any license provided herein, whether implied or
- * otherwise, applies only to this software file. Patent licenses, if
- * any, provided herein do not apply to combinations of this program with
- * other software, or any other product whatsoever.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
- * USA.
- */
-
-/* Do not modify. This is automatically generated.*/
-
-#ifndef _XTENSA_BASE_HEADER
-#define _XTENSA_BASE_HEADER
-
-#ifdef __XTENSA__
-#if defined(__GNUC__) && !defined(__XCC__)
-
-#define L8UI_ASM(arr, ars, imm) { \
- __asm__ volatile("l8ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \
-}
-
-#define XT_L8UI(ars, imm) \
-({ \
- unsigned char _arr; \
- const unsigned char *_ars = ars; \
- L8UI_ASM(_arr, _ars, imm); \
- _arr; \
-})
-
-#define L16UI_ASM(arr, ars, imm) { \
- __asm__ volatile("l16ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \
-}
-
-#define XT_L16UI(ars, imm) \
-({ \
- unsigned short _arr; \
- const unsigned short *_ars = ars; \
- L16UI_ASM(_arr, _ars, imm); \
- _arr; \
-})
-
-#define L16SI_ASM(arr, ars, imm) {\
- __asm__ volatile("l16si %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \
-}
-
-#define XT_L16SI(ars, imm) \
-({ \
- signed short _arr; \
- const signed short *_ars = ars; \
- L16SI_ASM(_arr, _ars, imm); \
- _arr; \
-})
-
-#define L32I_ASM(arr, ars, imm) { \
- __asm__ volatile("l32i %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \
-}
-
-#define XT_L32I(ars, imm) \
-({ \
- unsigned _arr; \
- const unsigned *_ars = ars; \
- L32I_ASM(_arr, _ars, imm); \
- _arr; \
-})
-
-#define S8I_ASM(arr, ars, imm) {\
- __asm__ volatile("s8i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \
-}
-
-#define XT_S8I(arr, ars, imm) \
-({ \
- signed char _arr = arr; \
- const signed char *_ars = ars; \
- S8I_ASM(_arr, _ars, imm); \
-})
-
-#define S16I_ASM(arr, ars, imm) {\
- __asm__ volatile("s16i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \
-}
-
-#define XT_S16I(arr, ars, imm) \
-({ \
- signed short _arr = arr; \
- const signed short *_ars = ars; \
- S16I_ASM(_arr, _ars, imm); \
-})
-
-#define S32I_ASM(arr, ars, imm) { \
- __asm__ volatile("s32i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \
-}
-
-#define XT_S32I(arr, ars, imm) \
-({ \
- signed int _arr = arr; \
- const signed int *_ars = ars; \
- S32I_ASM(_arr, _ars, imm); \
-})
-
-#define ADDI_ASM(art, ars, imm) {\
- __asm__ ("addi %0, %1, %2" : "=a" (art) : "a" (ars), "i" (imm)); \
-}
-
-#define XT_ADDI(ars, imm) \
-({ \
- unsigned _art; \
- unsigned _ars = ars; \
- ADDI_ASM(_art, _ars, imm); \
- _art; \
-})
-
-#define ABS_ASM(arr, art) {\
- __asm__ ("abs %0, %1" : "=a" (arr) : "a" (art)); \
-}
-
-#define XT_ABS(art) \
-({ \
- unsigned _arr; \
- signed _art = art; \
- ABS_ASM(_arr, _art); \
- _arr; \
-})
-
-/* Note: In the following macros that reference SAR, the magic "state"
- register is used to capture the dependency on SAR. This is because
- SAR is a 5-bit register and thus there are no C types that can be
- used to represent it. It doesn't appear that the SAR register is
- even relevant to GCC, but it is marked as "clobbered" just in
- case. */
-
-#define SRC_ASM(arr, ars, art) {\
- register int _xt_sar __asm__ ("state"); \
- __asm__ ("src %0, %1, %2" \
- : "=a" (arr) : "a" (ars), "a" (art), "t" (_xt_sar)); \
-}
-
-#define XT_SRC(ars, art) \
-({ \
- unsigned _arr; \
- unsigned _ars = ars; \
- unsigned _art = art; \
- SRC_ASM(_arr, _ars, _art); \
- _arr; \
-})
-
-#define SSR_ASM(ars) {\
- register int _xt_sar __asm__ ("state"); \
- __asm__ ("ssr %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \
-}
-
-#define XT_SSR(ars) \
-({ \
- unsigned _ars = ars; \
- SSR_ASM(_ars); \
-})
-
-#define SSL_ASM(ars) {\
- register int _xt_sar __asm__ ("state"); \
- __asm__ ("ssl %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \
-}
-
-#define XT_SSL(ars) \
-({ \
- unsigned _ars = ars; \
- SSL_ASM(_ars); \
-})
-
-#define SSA8B_ASM(ars) {\
- register int _xt_sar __asm__ ("state"); \
- __asm__ ("ssa8b %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \
-}
-
-#define XT_SSA8B(ars) \
-({ \
- unsigned _ars = ars; \
- SSA8B_ASM(_ars); \
-})
-
-#define SSA8L_ASM(ars) {\
- register int _xt_sar __asm__ ("state"); \
- __asm__ ("ssa8l %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \
-}
-
-#define XT_SSA8L(ars) \
-({ \
- unsigned _ars = ars; \
- SSA8L_ASM(_ars); \
-})
-
-#define SSAI_ASM(imm) {\
- register int _xt_sar __asm__ ("state"); \
- __asm__ ("ssai %1" : "=t" (_xt_sar) : "i" (imm) : "sar"); \
-}
-
-#define XT_SSAI(imm) \
-({ \
- SSAI_ASM(imm); \
-})
-
-
-
-
-
-
-
-
-#endif /* __GNUC__ && !__XCC__ */
-
-#ifdef __XCC__
-
-/* Core load/store instructions */
-extern unsigned char _TIE_L8UI(const unsigned char * ars, immediate imm);
-extern unsigned short _TIE_L16UI(const unsigned short * ars, immediate imm);
-extern signed short _TIE_L16SI(const signed short * ars, immediate imm);
-extern unsigned _TIE_L32I(const unsigned * ars, immediate imm);
-extern void _TIE_S8I(unsigned char arr, unsigned char * ars, immediate imm);
-extern void _TIE_S16I(unsigned short arr, unsigned short * ars, immediate imm);
-extern void _TIE_S32I(unsigned arr, unsigned * ars, immediate imm);
-
-#define XT_L8UI _TIE_L8UI
-#define XT_L16UI _TIE_L16UI
-#define XT_L16SI _TIE_L16SI
-#define XT_L32I _TIE_L32I
-#define XT_S8I _TIE_S8I
-#define XT_S16I _TIE_S16I
-#define XT_S32I _TIE_S32I
-
-/* Add-immediate instruction */
-extern unsigned _TIE_ADDI(unsigned ars, immediate imm);
-#define XT_ADDI _TIE_ADDI
-
-/* Absolute value instruction */
-extern unsigned _TIE_ABS(int art);
-#define XT_ABS _TIE_ABS
-
-/* funnel shift instructions */
-extern unsigned _TIE_SRC(unsigned ars, unsigned art);
-#define XT_SRC _TIE_SRC
-extern void _TIE_SSR(unsigned ars);
-#define XT_SSR _TIE_SSR
-extern void _TIE_SSL(unsigned ars);
-#define XT_SSL _TIE_SSL
-extern void _TIE_SSA8B(unsigned ars);
-#define XT_SSA8B _TIE_SSA8B
-extern void _TIE_SSA8L(unsigned ars);
-#define XT_SSA8L _TIE_SSA8L
-extern void _TIE_SSAI(immediate imm);
-#define XT_SSAI _TIE_SSAI
-
-
-#endif /* __XCC__ */
-
-#endif /* __XTENSA__ */
-#endif /* !_XTENSA_BASE_HEADER */
+++ /dev/null
-/*
- * Xtensa Special Register symbolic names
- */
-
-/* $Id: specreg.h,v 1.2 2003/03/07 19:15:18 joetaylor Exp $ */
-
-/*
- * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2.1 of the GNU Lesser General Public
- * License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Further, this software is distributed without any warranty that it is
- * free of the rightful claim of any third person regarding infringement
- * or the like. Any license provided herein, whether implied or
- * otherwise, applies only to this software file. Patent licenses, if
- * any, provided herein do not apply to combinations of this program with
- * other software, or any other product whatsoever.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
- * USA.
- */
-
-#ifndef XTENSA_SPECREG_H
-#define XTENSA_SPECREG_H
-
-/* Include these special register bitfield definitions, for historical reasons: */
-#include <xtensa/corebits.h>
-
-
-/* Special registers: */
-#define LBEG 0
-#define LEND 1
-#define LCOUNT 2
-#define SAR 3
-#define WINDOWBASE 72
-#define WINDOWSTART 73
-#define PTEVADDR 83
-#define RASID 90
-#define ITLBCFG 91
-#define DTLBCFG 92
-#define IBREAKENABLE 96
-#define DDR 104
-#define IBREAKA_0 128
-#define IBREAKA_1 129
-#define DBREAKA_0 144
-#define DBREAKA_1 145
-#define DBREAKC_0 160
-#define DBREAKC_1 161
-#define EPC_1 177
-#define EPC_2 178
-#define EPC_3 179
-#define EPC_4 180
-#define DEPC 192
-#define EPS_2 194
-#define EPS_3 195
-#define EPS_4 196
-#define EXCSAVE_1 209
-#define EXCSAVE_2 210
-#define EXCSAVE_3 211
-#define EXCSAVE_4 212
-#define INTERRUPT 226
-#define INTENABLE 228
-#define PS 230
-#define EXCCAUSE 232
-#define DEBUGCAUSE 233
-#define CCOUNT 234
-#define ICOUNT 236
-#define ICOUNTLEVEL 237
-#define EXCVADDR 238
-#define CCOMPARE_0 240
-#define CCOMPARE_1 241
-#define CCOMPARE_2 242
-#define MISC_REG_0 244
-#define MISC_REG_1 245
-
-/* Special cases (bases of special register series): */
-#define IBREAKA 128
-#define DBREAKA 144
-#define DBREAKC 160
-#define EPC 176
-#define EPS 192
-#define EXCSAVE 208
-#define CCOMPARE 240
-
-/* Special names for read-only and write-only interrupt registers: */
-#define INTREAD 226
-#define INTSET 226
-#define INTCLEAR 227
-
-#endif /* XTENSA_SPECREG_H */
-
+++ /dev/null
-/*
- * xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration
- *
- * NOTE: The location and contents of this file are highly subject to change.
- *
- * Source for configuration-independent binaries (which link in a
- * configuration-specific HAL library) must NEVER include this file.
- * The HAL itself has historically included this file in some instances,
- * but this is not appropriate either, because the HAL is meant to be
- * core-specific but system independent.
- */
-
-/*
- * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2.1 of the GNU Lesser General Public
- * License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Further, this software is distributed without any warranty that it is
- * free of the rightful claim of any third person regarding infringement
- * or the like. Any license provided herein, whether implied or
- * otherwise, applies only to this software file. Patent licenses, if
- * any, provided herein do not apply to combinations of this program with
- * other software, or any other product whatsoever.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
- * USA.
- */
-
-
-#ifndef XTENSA_CONFIG_SYSTEM_H
-#define XTENSA_CONFIG_SYSTEM_H
-
-/*#include <xtensa/hal.h>*/
-
-
-
-/*----------------------------------------------------------------------
- DEVICE ADDRESSES
- ----------------------------------------------------------------------*/
-
-/*
- * Strange place to find these, but the configuration GUI
- * allows moving these around to account for various core
- * configurations. Specific boards (and their BSP software)
- * will have specific meanings for these components.
- */
-
-/* I/O Block areas: */
-#define XSHAL_IOBLOCK_CACHED_VADDR 0xE0000000
-#define XSHAL_IOBLOCK_CACHED_PADDR 0xF0000000
-#define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000
-
-#define XSHAL_IOBLOCK_BYPASS_VADDR 0xF0000000
-#define XSHAL_IOBLOCK_BYPASS_PADDR 0xF0000000
-#define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000
-
-/* System ROM: */
-#define XSHAL_ROM_VADDR 0xEE000000
-#define XSHAL_ROM_PADDR 0xFE000000
-#define XSHAL_ROM_SIZE 0x00400000
-/* Largest available area (free of vectors): */
-#define XSHAL_ROM_AVAIL_VADDR 0xEE00052C
-#define XSHAL_ROM_AVAIL_VSIZE 0x003FFAD4
-
-/* System RAM: */
-#define XSHAL_RAM_VADDR 0xD0000000
-#define XSHAL_RAM_PADDR 0x00000000
-#define XSHAL_RAM_VSIZE 0x08000000
-#define XSHAL_RAM_PSIZE 0x10000000
-#define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE
-/* Largest available area (free of vectors): */
-#define XSHAL_RAM_AVAIL_VADDR 0xD0000370
-#define XSHAL_RAM_AVAIL_VSIZE 0x07FFFC90
-
-/*
- * Shadow system RAM (same device as system RAM, at different address).
- * (Emulation boards need this for the SONIC Ethernet driver
- * when data caches are configured for writeback mode.)
- * NOTE: on full MMU configs, this points to the BYPASS virtual address
- * of system RAM, ie. is the same as XSHAL_RAM_* except that virtual
- * addresses are viewed through the BYPASS static map rather than
- * the CACHED static map.
- */
-#define XSHAL_RAM_BYPASS_VADDR 0xD8000000
-#define XSHAL_RAM_BYPASS_PADDR 0x00000000
-#define XSHAL_RAM_BYPASS_PSIZE 0x08000000
-
-/* Alternate system RAM (different device than system RAM): */
-#define XSHAL_ALTRAM_VADDR 0xCEE00000
-#define XSHAL_ALTRAM_PADDR 0xC0000000
-#define XSHAL_ALTRAM_SIZE 0x00200000
-
-
-/*----------------------------------------------------------------------
- * DEVICE-ADDRESS DEPENDENT...
- *
- * Values written to CACHEATTR special register (or its equivalent)
- * to enable and disable caches in various modes.
- *----------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------
- BACKWARD COMPATIBILITY ...
- ----------------------------------------------------------------------*/
-
-/*
- * NOTE: the following two macros are DEPRECATED. Use the latter
- * board-specific macros instead, which are specially tuned for the
- * particular target environments' memory maps.
- */
-#define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */
-#define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */
-
-/*----------------------------------------------------------------------
- ISS (Instruction Set Simulator) SPECIFIC ...
- ----------------------------------------------------------------------*/
-
-#define XSHAL_ISS_CACHEATTR_WRITEBACK 0x1122222F /* enable caches in write-back mode */
-#define XSHAL_ISS_CACHEATTR_WRITEALLOC 0x1122222F /* enable caches in write-allocate mode */
-#define XSHAL_ISS_CACHEATTR_WRITETHRU 0x1122222F /* enable caches in write-through mode */
-#define XSHAL_ISS_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */
-#define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_ISS_CACHEATTR_WRITEBACK /* default setting to enable caches */
-
-/* For Coware only: */
-#define XSHAL_COWARE_CACHEATTR_WRITEBACK 0x11222222 /* enable caches in write-back mode */
-#define XSHAL_COWARE_CACHEATTR_WRITEALLOC 0x11222222 /* enable caches in write-allocate mode */
-#define XSHAL_COWARE_CACHEATTR_WRITETHRU 0x11222222 /* enable caches in write-through mode */
-#define XSHAL_COWARE_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */
-#define XSHAL_COWARE_CACHEATTR_DEFAULT XSHAL_COWARE_CACHEATTR_WRITEBACK /* default setting to enable caches */
-
-/* For BFM and other purposes: */
-#define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x11222222 /* enable caches without any invalid regions */
-#define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting for caches without any invalid regions */
-
-#define XSHAL_ISS_PIPE_REGIONS 0
-#define XSHAL_ISS_SDRAM_REGIONS 0
-
-
-/*----------------------------------------------------------------------
- XT2000 BOARD SPECIFIC ...
- ----------------------------------------------------------------------*/
-
-#define XSHAL_XT2000_CACHEATTR_WRITEBACK 0x22FFFFFF /* enable caches in write-back mode */
-#define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0x22FFFFFF /* enable caches in write-allocate mode */
-#define XSHAL_XT2000_CACHEATTR_WRITETHRU 0x22FFFFFF /* enable caches in write-through mode */
-#define XSHAL_XT2000_CACHEATTR_BYPASS 0x22FFFFFF /* disable caches in bypass mode */
-#define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */
-
-#define XSHAL_XT2000_PIPE_REGIONS 0x00001000 /* BusInt pipeline regions */
-#define XSHAL_XT2000_SDRAM_REGIONS 0x00000005 /* BusInt SDRAM regions */
-
-
-/*----------------------------------------------------------------------
- VECTOR SIZES
- ----------------------------------------------------------------------*/
-
-/*
- * Sizes allocated to vectors by the system (memory map) configuration.
- * These sizes are constrained by core configuration (eg. one vector's
- * code cannot overflow into another vector) but are dependent on the
- * system or board (or LSP) memory map configuration.
- *
- * Whether or not each vector happens to be in a system ROM is also
- * a system configuration matter, sometimes useful, included here also:
- */
-#define XSHAL_RESET_VECTOR_SIZE 0x000004E0
-#define XSHAL_RESET_VECTOR_ISROM 1
-#define XSHAL_USER_VECTOR_SIZE 0x0000001C
-#define XSHAL_USER_VECTOR_ISROM 0
-#define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */
-#define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */
-#define XSHAL_KERNEL_VECTOR_SIZE 0x0000001C
-#define XSHAL_KERNEL_VECTOR_ISROM 0
-#define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */
-#define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */
-#define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x000000E0
-#define XSHAL_DOUBLEEXC_VECTOR_ISROM 0
-#define XSHAL_WINDOW_VECTORS_SIZE 0x00000180
-#define XSHAL_WINDOW_VECTORS_ISROM 0
-#define XSHAL_INTLEVEL2_VECTOR_SIZE 0x0000000C
-#define XSHAL_INTLEVEL2_VECTOR_ISROM 0
-#define XSHAL_INTLEVEL3_VECTOR_SIZE 0x0000000C
-#define XSHAL_INTLEVEL3_VECTOR_ISROM 0
-#define XSHAL_INTLEVEL4_VECTOR_SIZE 0x0000000C
-#define XSHAL_INTLEVEL4_VECTOR_ISROM 1
-#define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL4_VECTOR_SIZE
-#define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL4_VECTOR_ISROM
-
-
-#endif /*XTENSA_CONFIG_SYSTEM_H*/
-
+++ /dev/null
-/*
- * xtensa/config/tie.h -- HAL definitions that are dependent on CORE and TIE configuration
- *
- * This header file is sometimes referred to as the "compile-time HAL" or CHAL.
- * It was generated for a specific Xtensa processor configuration,
- * and furthermore for a specific set of TIE source files that extend
- * basic core functionality.
- *
- * Source for configuration-independent binaries (which link in a
- * configuration-specific HAL library) must NEVER include this file.
- * It is perfectly normal, however, for the HAL source itself to include this file.
- */
-
-/*
- * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2.1 of the GNU Lesser General Public
- * License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Further, this software is distributed without any warranty that it is
- * free of the rightful claim of any third person regarding infringement
- * or the like. Any license provided herein, whether implied or
- * otherwise, applies only to this software file. Patent licenses, if
- * any, provided herein do not apply to combinations of this program with
- * other software, or any other product whatsoever.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
- * USA.
- */
-
-
-#ifndef XTENSA_CONFIG_TIE_H
-#define XTENSA_CONFIG_TIE_H
-
-#include <xtensa/hal.h>
-
-
-/*----------------------------------------------------------------------
- GENERAL
- ----------------------------------------------------------------------*/
-
-/*
- * Separators for macros that expand into arrays.
- * These can be predefined by files that #include this one,
- * when different separators are required.
- */
-/* Element separator for macros that expand into 1-dimensional arrays: */
-#ifndef XCHAL_SEP
-#define XCHAL_SEP ,
-#endif
-/* Array separator for macros that expand into 2-dimensional arrays: */
-#ifndef XCHAL_SEP2
-#define XCHAL_SEP2 },{
-#endif
-
-
-
-
-
-
-/*----------------------------------------------------------------------
- COPROCESSORS and EXTRA STATE
- ----------------------------------------------------------------------*/
-
-#define XCHAL_CP_NUM 0 /* number of coprocessors */
-#define XCHAL_CP_MAX 0 /* max coprocessor id plus one (0 if none) */
-#define XCHAL_CP_MASK 0x00 /* bitmask of coprocessors by id */
-
-/* Space for coprocessors' state save areas: */
-#define XCHAL_CP0_SA_SIZE 0
-#define XCHAL_CP1_SA_SIZE 0
-#define XCHAL_CP2_SA_SIZE 0
-#define XCHAL_CP3_SA_SIZE 0
-#define XCHAL_CP4_SA_SIZE 0
-#define XCHAL_CP5_SA_SIZE 0
-#define XCHAL_CP6_SA_SIZE 0
-#define XCHAL_CP7_SA_SIZE 0
-/* Minimum required alignments of CP state save areas: */
-#define XCHAL_CP0_SA_ALIGN 1
-#define XCHAL_CP1_SA_ALIGN 1
-#define XCHAL_CP2_SA_ALIGN 1
-#define XCHAL_CP3_SA_ALIGN 1
-#define XCHAL_CP4_SA_ALIGN 1
-#define XCHAL_CP5_SA_ALIGN 1
-#define XCHAL_CP6_SA_ALIGN 1
-#define XCHAL_CP7_SA_ALIGN 1
-
-/* Indexing macros: */
-#define _XCHAL_CP_SA_SIZE(n) XCHAL_CP ## n ## _SA_SIZE
-#define XCHAL_CP_SA_SIZE(n) _XCHAL_CP_SA_SIZE(n) /* n = 0 .. 7 */
-#define _XCHAL_CP_SA_ALIGN(n) XCHAL_CP ## n ## _SA_ALIGN
-#define XCHAL_CP_SA_ALIGN(n) _XCHAL_CP_SA_ALIGN(n) /* n = 0 .. 7 */
-
-
-/* Space for "extra" state (user special registers and non-cp TIE) save area: */
-#define XCHAL_EXTRA_SA_SIZE 0
-#define XCHAL_EXTRA_SA_ALIGN 1
-
-/* Total save area size (extra + all coprocessors) */
-/* (not useful until xthal_{save,restore}_all_extra() is implemented, */
-/* but included for Tor2 beta; doesn't account for alignment!): */
-#define XCHAL_CPEXTRA_SA_SIZE_TOR2 0 /* Tor2Beta temporary definition -- do not use */
-
-/* Combined required alignment for all CP and EXTRA state save areas */
-/* (does not include required alignment for any base config registers): */
-#define XCHAL_CPEXTRA_SA_ALIGN 1
-
-/* ... */
-
-
-#ifdef _ASMLANGUAGE
-/*
- * Assembly-language specific definitions (assembly macros, etc.).
- */
-#include <xtensa/config/specreg.h>
-
-/********************
- * Macros to save and restore the non-coprocessor TIE portion of EXTRA state.
- */
-
-/* (none) */
-
-
-/********************
- * Macros to create functions that save and restore all EXTRA (non-coprocessor) state
- * (does not include zero-overhead loop registers and non-optional registers).
- */
-
- /*
- * Macro that expands to the body of a function that
- * stores the extra (non-coprocessor) optional/custom state.
- * Entry: a2 = ptr to save area in which to save extra state
- * Exit: any register a2-a15 (?) may have been clobbered.
- */
- .macro xchal_extra_store_funcbody
- .endm
-
-
- /*
- * Macro that expands to the body of a function that
- * loads the extra (non-coprocessor) optional/custom state.
- * Entry: a2 = ptr to save area from which to restore extra state
- * Exit: any register a2-a15 (?) may have been clobbered.
- */
- .macro xchal_extra_load_funcbody
- .endm
-
-
-/********************
- * Macros to save and restore the state of each TIE coprocessor.
- */
-
-
-
-/********************
- * Macros to create functions that save and restore the state of *any* TIE coprocessor.
- */
-
- /*
- * Macro that expands to the body of a function
- * that stores the selected coprocessor's state (registers etc).
- * Entry: a2 = ptr to save area in which to save cp state
- * a3 = coprocessor number
- * Exit: any register a2-a15 (?) may have been clobbered.
- */
- .macro xchal_cpi_store_funcbody
- .endm
-
-
- /*
- * Macro that expands to the body of a function
- * that loads the selected coprocessor's state (registers etc).
- * Entry: a2 = ptr to save area from which to restore cp state
- * a3 = coprocessor number
- * Exit: any register a2-a15 (?) may have been clobbered.
- */
- .macro xchal_cpi_load_funcbody
- .endm
-
-#endif /*_ASMLANGUAGE*/
-
-
-/*
- * Contents of save areas in terms of libdb register numbers.
- * NOTE: CONTENTS_LIBDB_{UREG,REGF} macros are not defined in this file;
- * it is up to the user of this header file to define these macros
- * usefully before each expansion of the CONTENTS_LIBDB macros.
- * (Fields rsv[123] are reserved for future additions; they are currently
- * set to zero but may be set to some useful values in the future.)
- *
- * CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum, bitmask, rsv2, rsv3)
- * CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum, bitmask, rsv2, rsv3)
- * CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, numentries, contentsize, regname_base, regfile_name, rsv2, rsv3)
- */
-
-#define XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM 0
-#define XCHAL_EXTRA_SA_CONTENTS_LIBDB /* empty */
-
-#define XCHAL_CP0_SA_CONTENTS_LIBDB_NUM 0
-#define XCHAL_CP0_SA_CONTENTS_LIBDB /* empty */
-
-#define XCHAL_CP1_SA_CONTENTS_LIBDB_NUM 0
-#define XCHAL_CP1_SA_CONTENTS_LIBDB /* empty */
-
-#define XCHAL_CP2_SA_CONTENTS_LIBDB_NUM 0
-#define XCHAL_CP2_SA_CONTENTS_LIBDB /* empty */
-
-#define XCHAL_CP3_SA_CONTENTS_LIBDB_NUM 0
-#define XCHAL_CP3_SA_CONTENTS_LIBDB /* empty */
-
-#define XCHAL_CP4_SA_CONTENTS_LIBDB_NUM 0
-#define XCHAL_CP4_SA_CONTENTS_LIBDB /* empty */
-
-#define XCHAL_CP5_SA_CONTENTS_LIBDB_NUM 0
-#define XCHAL_CP5_SA_CONTENTS_LIBDB /* empty */
-
-#define XCHAL_CP6_SA_CONTENTS_LIBDB_NUM 0
-#define XCHAL_CP6_SA_CONTENTS_LIBDB /* empty */
-
-#define XCHAL_CP7_SA_CONTENTS_LIBDB_NUM 0
-#define XCHAL_CP7_SA_CONTENTS_LIBDB /* empty */
-
-
-
-
-
-
-/*----------------------------------------------------------------------
- MISC
- ----------------------------------------------------------------------*/
-
-#if 0 /* is there something equivalent for user TIE? */
-#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier
- (CoreID) set in the Xtensa Processor Generator */
-
-#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */
-
-/* These definitions describe the hardware targeted by this software: */
-#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */
-#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */
-#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */
-#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */
-#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */
-#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */
-#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */
-#define XTHAL_HW_REL_T1050 1
-#define XTHAL_HW_REL_T1050_1 1
-#define XCHAL_HW_CONFIGID_RELIABLE 1
-#endif /*0*/
-
-
-
-/*----------------------------------------------------------------------
- ISA
- ----------------------------------------------------------------------*/
-
-#if 0 /* these probably don't belong here, but are related to or implemented using TIE */
-#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */
-/* Misc instructions: */
-#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */
-#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */
-
-#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */
-#endif /*0*/
-
-
-#endif /*XTENSA_CONFIG_TIE_H*/
-
+++ /dev/null
-#ifndef XTENSA_COREASM_H
-#define XTENSA_COREASM_H
-
-/*
- * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
- *
- * include/asm-xtensa/xtensa/coreasm.h -- assembler-specific
- * definitions that depend on CORE configuration.
- *
- * Source for configuration-independent binaries (which link in a
- * configuration-specific HAL library) must NEVER include this file.
- * It is perfectly normal, however, for the HAL itself to include this
- * file.
- *
- * This file must NOT include xtensa/config/system.h. Any assembler
- * header file that depends on system information should likely go in
- * a new systemasm.h (or sysasm.h) header file.
- *
- * NOTE: macro beqi32 is NOT configuration-dependent, and is placed
- * here til we will have configuration-independent header file.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- *
- * Copyright (C) 2002 Tensilica Inc.
- */
-
-
-#include <xtensa/config/core.h>
-#include <xtensa/config/specreg.h>
-
-/*
- * Assembly-language specific definitions (assembly macros, etc.).
- */
-
-/*----------------------------------------------------------------------
- * find_ms_setbit
- *
- * This macro finds the most significant bit that is set in <as>
- * and return its index + <base> in <ad>, or <base> - 1 if <as> is zero.
- * The index counts starting at zero for the lsbit, so the return
- * value ranges from <base>-1 (no bit set) to <base>+31 (msbit set).
- *
- * Parameters:
- * <ad> destination address register (any register)
- * <as> source address register
- * <at> temporary address register (must be different than <as>)
- * <base> constant value added to result (usually 0 or 1)
- * On entry:
- * <ad> = undefined if different than <as>
- * <as> = value whose most significant set bit is to be found
- * <at> = undefined
- * no other registers are used by this macro.
- * On exit:
- * <ad> = <base> + index of msbit set in original <as>,
- * = <base> - 1 if original <as> was zero.
- * <as> clobbered (if not <ad>)
- * <at> clobbered (if not <ad>)
- * Example:
- * find_ms_setbit a0, a4, a0, 0 -- return in a0 index of msbit set in a4
- */
-
- .macro find_ms_setbit ad, as, at, base
-#if XCHAL_HAVE_NSA
- movi \at, 31+\base
- nsau \as, \as // get index of \as, numbered from msbit (32 if absent)
- sub \ad, \at, \as // get numbering from lsbit (0..31, -1 if absent)
-#else /* XCHAL_HAVE_NSA */
- movi \at, \base // start with result of 0 (point to lsbit of 32)
-
- beqz \as, 2f // special case for zero argument: return -1
- bltui \as, 0x10000, 1f // is it one of the 16 lsbits? (if so, check lower 16 bits)
- addi \at, \at, 16 // no, increment result to upper 16 bits (of 32)
- //srli \as, \as, 16 // check upper half (shift right 16 bits)
- extui \as, \as, 16, 16 // check upper half (shift right 16 bits)
-1: bltui \as, 0x100, 1f // is it one of the 8 lsbits? (if so, check lower 8 bits)
- addi \at, \at, 8 // no, increment result to upper 8 bits (of 16)
- srli \as, \as, 8 // shift right to check upper 8 bits
-1: bltui \as, 0x10, 1f // is it one of the 4 lsbits? (if so, check lower 4 bits)
- addi \at, \at, 4 // no, increment result to upper 4 bits (of 8)
- srli \as, \as, 4 // shift right 4 bits to check upper half
-1: bltui \as, 0x4, 1f // is it one of the 2 lsbits? (if so, check lower 2 bits)
- addi \at, \at, 2 // no, increment result to upper 2 bits (of 4)
- srli \as, \as, 2 // shift right 2 bits to check upper half
-1: bltui \as, 0x2, 1f // is it the lsbit?
- addi \at, \at, 2 // no, increment result to upper bit (of 2)
-2: addi \at, \at, -1 // (from just above: add 1; from beqz: return -1)
- //srli \as, \as, 1
-1: // done! \at contains index of msbit set (or -1 if none set)
- .if 0x\ad - 0x\at // destination different than \at ? (works because regs are a0-a15)
- mov \ad, \at // then move result to \ad
- .endif
-#endif /* XCHAL_HAVE_NSA */
- .endm // find_ms_setbit
-
-/*----------------------------------------------------------------------
- * find_ls_setbit
- *
- * This macro finds the least significant bit that is set in <as>,
- * and return its index in <ad>.
- * Usage is the same as for the find_ms_setbit macro.
- * Example:
- * find_ls_setbit a0, a4, a0, 0 -- return in a0 index of lsbit set in a4
- */
-
- .macro find_ls_setbit ad, as, at, base
- neg \at, \as // keep only the least-significant bit that is set...
- and \as, \at, \as // ... in \as
- find_ms_setbit \ad, \as, \at, \base
- .endm // find_ls_setbit
-
-/*----------------------------------------------------------------------
- * find_ls_one
- *
- * Same as find_ls_setbit with base zero.
- * Source (as) and destination (ad) registers must be different.
- * Provided for backward compatibility.
- */
-
- .macro find_ls_one ad, as
- find_ls_setbit \ad, \as, \ad, 0
- .endm // find_ls_one
-
-/*----------------------------------------------------------------------
- * floop, floopnez, floopgtz, floopend
- *
- * These macros are used for fast inner loops that
- * work whether or not the Loops options is configured.
- * If the Loops option is configured, they simply use
- * the zero-overhead LOOP instructions; otherwise
- * they use explicit decrement and branch instructions.
- *
- * They are used in pairs, with floop, floopnez or floopgtz
- * at the beginning of the loop, and floopend at the end.
- *
- * Each pair of loop macro calls must be given the loop count
- * address register and a unique label for that loop.
- *
- * Example:
- *
- * movi a3, 16 // loop 16 times
- * floop a3, myloop1
- * :
- * bnez a7, end1 // exit loop if a7 != 0
- * :
- * floopend a3, myloop1
- * end1:
- *
- * Like the LOOP instructions, these macros cannot be
- * nested, must include at least one instruction,
- * cannot call functions inside the loop, etc.
- * The loop can be exited by jumping to the instruction
- * following floopend (or elsewhere outside the loop),
- * or continued by jumping to a NOP instruction placed
- * immediately before floopend.
- *
- * Unlike LOOP instructions, the register passed to floop*
- * cannot be used inside the loop, because it is used as
- * the loop counter if the Loops option is not configured.
- * And its value is undefined after exiting the loop.
- * And because the loop counter register is active inside
- * the loop, you can't easily use this construct to loop
- * across a register file using ROTW as you might with LOOP
- * instructions, unless you copy the loop register along.
- */
-
- /* Named label version of the macros: */
-
- .macro floop ar, endlabel
- floop_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel
- .endm
-
- .macro floopnez ar, endlabel
- floopnez_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel
- .endm
-
- .macro floopgtz ar, endlabel
- floopgtz_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel
- .endm
-
- .macro floopend ar, endlabel
- floopend_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel
- .endm
-
- /* Numbered local label version of the macros: */
-#if 0 /*UNTESTED*/
- .macro floop89 ar
- floop_ \ar, 8, 9f
- .endm
-
- .macro floopnez89 ar
- floopnez_ \ar, 8, 9f
- .endm
-
- .macro floopgtz89 ar
- floopgtz_ \ar, 8, 9f
- .endm
-
- .macro floopend89 ar
- floopend_ \ar, 8b, 9
- .endm
-#endif /*0*/
-
- /* Underlying version of the macros: */
-
- .macro floop_ ar, startlabel, endlabelref
- .ifdef _infloop_
- .if _infloop_
- .err // Error: floop cannot be nested
- .endif
- .endif
- .set _infloop_, 1
-#if XCHAL_HAVE_LOOPS
- loop \ar, \endlabelref
-#else /* XCHAL_HAVE_LOOPS */
-\startlabel:
- addi \ar, \ar, -1
-#endif /* XCHAL_HAVE_LOOPS */
- .endm // floop_
-
- .macro floopnez_ ar, startlabel, endlabelref
- .ifdef _infloop_
- .if _infloop_
- .err // Error: floopnez cannot be nested
- .endif
- .endif
- .set _infloop_, 1
-#if XCHAL_HAVE_LOOPS
- loopnez \ar, \endlabelref
-#else /* XCHAL_HAVE_LOOPS */
- beqz \ar, \endlabelref
-\startlabel:
- addi \ar, \ar, -1
-#endif /* XCHAL_HAVE_LOOPS */
- .endm // floopnez_
-
- .macro floopgtz_ ar, startlabel, endlabelref
- .ifdef _infloop_
- .if _infloop_
- .err // Error: floopgtz cannot be nested
- .endif
- .endif
- .set _infloop_, 1
-#if XCHAL_HAVE_LOOPS
- loopgtz \ar, \endlabelref
-#else /* XCHAL_HAVE_LOOPS */
- bltz \ar, \endlabelref
- beqz \ar, \endlabelref
-\startlabel:
- addi \ar, \ar, -1
-#endif /* XCHAL_HAVE_LOOPS */
- .endm // floopgtz_
-
-
- .macro floopend_ ar, startlabelref, endlabel
- .ifndef _infloop_
- .err // Error: floopend without matching floopXXX
- .endif
- .ifeq _infloop_
- .err // Error: floopend without matching floopXXX
- .endif
- .set _infloop_, 0
-#if ! XCHAL_HAVE_LOOPS
- bnez \ar, \startlabelref
-#endif /* XCHAL_HAVE_LOOPS */
-\endlabel:
- .endm // floopend_
-
-/*----------------------------------------------------------------------
- * crsil -- conditional RSIL (read/set interrupt level)
- *
- * Executes the RSIL instruction if it exists, else just reads PS.
- * The RSIL instruction does not exist in the new exception architecture
- * if the interrupt option is not selected.
- */
-
- .macro crsil ar, newlevel
-#if XCHAL_HAVE_OLD_EXC_ARCH || XCHAL_HAVE_INTERRUPTS
- rsil \ar, \newlevel
-#else
- rsr \ar, PS
-#endif
- .endm // crsil
-
-/*----------------------------------------------------------------------
- * window_spill{4,8,12}
- *
- * These macros spill callers' register windows to the stack.
- * They work for both privileged and non-privileged tasks.
- * Must be called from a windowed ABI context, eg. within
- * a windowed ABI function (ie. valid stack frame, window
- * exceptions enabled, not in exception mode, etc).
- *
- * This macro requires a single invocation of the window_spill_common
- * macro in the same assembly unit and section.
- *
- * Note that using window_spill{4,8,12} macros is more efficient
- * than calling a function implemented using window_spill_function,
- * because the latter needs extra code to figure out the size of
- * the call to the spilling function.
- *
- * Example usage:
- *
- * .text
- * .align 4
- * .global some_function
- * .type some_function,@function
- * some_function:
- * entry a1, 16
- * :
- * :
- *
- * window_spill4 // spill windows of some_function's callers; preserves a0..a3 only;
- * // to use window_spill{8,12} in this example function we'd have
- * // to increase space allocated by the entry instruction, because
- * // 16 bytes only allows call4; 32 or 48 bytes (+locals) are needed
- * // for call8/window_spill8 or call12/window_spill12 respectively.
- * :
- *
- * retw
- *
- * window_spill_common // instantiates code used by window_spill4
- *
- *
- * On entry:
- * none (if window_spill4)
- * stack frame has enough space allocated for call8 (if window_spill8)
- * stack frame has enough space allocated for call12 (if window_spill12)
- * On exit:
- * a4..a15 clobbered (if window_spill4)
- * a8..a15 clobbered (if window_spill8)
- * a12..a15 clobbered (if window_spill12)
- * no caller windows are in live registers
- */
-
- .macro window_spill4
-#if XCHAL_HAVE_WINDOWED
-# if XCHAL_NUM_AREGS == 16
- movi a15, 0 // for 16-register files, no need to call to reach the end
-# elif XCHAL_NUM_AREGS == 32
- call4 .L__wdwspill_assist28 // call deep enough to clear out any live callers
-# elif XCHAL_NUM_AREGS == 64
- call4 .L__wdwspill_assist60 // call deep enough to clear out any live callers
-# endif
-#endif
- .endm // window_spill4
-
- .macro window_spill8
-#if XCHAL_HAVE_WINDOWED
-# if XCHAL_NUM_AREGS == 16
- movi a15, 0 // for 16-register files, no need to call to reach the end
-# elif XCHAL_NUM_AREGS == 32
- call8 .L__wdwspill_assist24 // call deep enough to clear out any live callers
-# elif XCHAL_NUM_AREGS == 64
- call8 .L__wdwspill_assist56 // call deep enough to clear out any live callers
-# endif
-#endif
- .endm // window_spill8
-
- .macro window_spill12
-#if XCHAL_HAVE_WINDOWED
-# if XCHAL_NUM_AREGS == 16
- movi a15, 0 // for 16-register files, no need to call to reach the end
-# elif XCHAL_NUM_AREGS == 32
- call12 .L__wdwspill_assist20 // call deep enough to clear out any live callers
-# elif XCHAL_NUM_AREGS == 64
- call12 .L__wdwspill_assist52 // call deep enough to clear out any live callers
-# endif
-#endif
- .endm // window_spill12
-
-/*----------------------------------------------------------------------
- * window_spill_function
- *
- * This macro outputs a function that will spill its caller's callers'
- * register windows to the stack. Eg. it could be used to implement
- * a version of xthal_window_spill() that works in non-privileged tasks.
- * This works for both privileged and non-privileged tasks.
- *
- * Typical usage:
- *
- * .text
- * .align 4
- * .global my_spill_function
- * .type my_spill_function,@function
- * my_spill_function:
- * window_spill_function
- *
- * On entry to resulting function:
- * none
- * On exit from resulting function:
- * none (no caller windows are in live registers)
- */
-
- .macro window_spill_function
-#if XCHAL_HAVE_WINDOWED
-# if XCHAL_NUM_AREGS == 32
- entry sp, 48
- bbci.l a0, 31, 1f // branch if called with call4
- bbsi.l a0, 30, 2f // branch if called with call12
- call8 .L__wdwspill_assist16 // called with call8, only need another 8
- retw
-1: call12 .L__wdwspill_assist16 // called with call4, only need another 12
- retw
-2: call4 .L__wdwspill_assist16 // called with call12, only need another 4
- retw
-# elif XCHAL_NUM_AREGS == 64
- entry sp, 48
- bbci.l a0, 31, 1f // branch if called with call4
- bbsi.l a0, 30, 2f // branch if called with call12
- call4 .L__wdwspill_assist52 // called with call8, only need a call4
- retw
-1: call8 .L__wdwspill_assist52 // called with call4, only need a call8
- retw
-2: call12 .L__wdwspill_assist40 // called with call12, can skip a call12
- retw
-# elif XCHAL_NUM_AREGS == 16
- entry sp, 16
- bbci.l a0, 31, 1f // branch if called with call4
- bbsi.l a0, 30, 2f // branch if called with call12
- movi a7, 0 // called with call8
- retw
-1: movi a11, 0 // called with call4
-2: retw // if called with call12, everything already spilled
-
-// movi a15, 0 // trick to spill all but the direct caller
-// j 1f
-// // The entry instruction is magical in the assembler (gets auto-aligned)
-// // so we have to jump to it to avoid falling through the padding.
-// // We need entry/retw to know where to return.
-//1: entry sp, 16
-// retw
-# else
-# error "unrecognized address register file size"
-# endif
-#endif /* XCHAL_HAVE_WINDOWED */
- window_spill_common
- .endm // window_spill_function
-
-/*----------------------------------------------------------------------
- * window_spill_common
- *
- * Common code used by any number of invocations of the window_spill##
- * and window_spill_function macros.
- *
- * Must be instantiated exactly once within a given assembly unit,
- * within call/j range of and same section as window_spill##
- * macro invocations for that assembly unit.
- * (Is automatically instantiated by the window_spill_function macro.)
- */
-
- .macro window_spill_common
-#if XCHAL_HAVE_WINDOWED && (XCHAL_NUM_AREGS == 32 || XCHAL_NUM_AREGS == 64)
- .ifndef .L__wdwspill_defined
-# if XCHAL_NUM_AREGS >= 64
-.L__wdwspill_assist60:
- entry sp, 32
- call8 .L__wdwspill_assist52
- retw
-.L__wdwspill_assist56:
- entry sp, 16
- call4 .L__wdwspill_assist52
- retw
-.L__wdwspill_assist52:
- entry sp, 48
- call12 .L__wdwspill_assist40
- retw
-.L__wdwspill_assist40:
- entry sp, 48
- call12 .L__wdwspill_assist28
- retw
-# endif
-.L__wdwspill_assist28:
- entry sp, 48
- call12 .L__wdwspill_assist16
- retw
-.L__wdwspill_assist24:
- entry sp, 32
- call8 .L__wdwspill_assist16
- retw
-.L__wdwspill_assist20:
- entry sp, 16
- call4 .L__wdwspill_assist16
- retw
-.L__wdwspill_assist16:
- entry sp, 16
- movi a15, 0
- retw
- .set .L__wdwspill_defined, 1
- .endif
-#endif /* XCHAL_HAVE_WINDOWED with 32 or 64 aregs */
- .endm // window_spill_common
-
-/*----------------------------------------------------------------------
- * beqi32
- *
- * macro implements version of beqi for arbitrary 32-bit immidiate value
- *
- * beqi32 ax, ay, imm32, label
- *
- * Compares value in register ax with imm32 value and jumps to label if
- * equal. Clobberes register ay if needed
- *
- */
- .macro beqi32 ax, ay, imm, label
- .ifeq ((\imm-1) & ~7) // 1..8 ?
- beqi \ax, \imm, \label
- .else
- .ifeq (\imm+1) // -1 ?
- beqi \ax, \imm, \label
- .else
- .ifeq (\imm) // 0 ?
- beqz \ax, \label
- .else
- // We could also handle immediates 10,12,16,32,64,128,256
- // but it would be a long macro...
- movi \ay, \imm
- beq \ax, \ay, \label
- .endif
- .endif
- .endif
- .endm // beqi32
-
-#endif /*XTENSA_COREASM_H*/
-
+++ /dev/null
-#ifndef XTENSA_COREBITS_H
-#define XTENSA_COREBITS_H
-
-/*
- * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
- *
- * xtensa/corebits.h - Xtensa Special Register field positions and masks.
- *
- * (In previous releases, these were defined in specreg.h, a generated file.
- * This file is not generated, i.e. it is processor configuration independent.)
- */
-
-
-/* EXCCAUSE register fields: */
-#define EXCCAUSE_EXCCAUSE_SHIFT 0
-#define EXCCAUSE_EXCCAUSE_MASK 0x3F
-/* Exception causes (mostly incomplete!): */
-#define EXCCAUSE_ILLEGAL 0
-#define EXCCAUSE_SYSCALL 1
-#define EXCCAUSE_IFETCHERROR 2
-#define EXCCAUSE_LOADSTOREERROR 3
-#define EXCCAUSE_LEVEL1INTERRUPT 4
-#define EXCCAUSE_ALLOCA 5
-
-/* PS register fields: */
-#define PS_WOE_SHIFT 18
-#define PS_WOE_MASK 0x00040000
-#define PS_WOE PS_WOE_MASK
-#define PS_CALLINC_SHIFT 16
-#define PS_CALLINC_MASK 0x00030000
-#define PS_CALLINC(n) (((n)&3)<<PS_CALLINC_SHIFT) /* n = 0..3 */
-#define PS_OWB_SHIFT 8
-#define PS_OWB_MASK 0x00000F00
-#define PS_OWB(n) (((n)&15)<<PS_OWB_SHIFT) /* n = 0..15 (or 0..7) */
-#define PS_RING_SHIFT 6
-#define PS_RING_MASK 0x000000C0
-#define PS_RING(n) (((n)&3)<<PS_RING_SHIFT) /* n = 0..3 */
-#define PS_UM_SHIFT 5
-#define PS_UM_MASK 0x00000020
-#define PS_UM PS_UM_MASK
-#define PS_EXCM_SHIFT 4
-#define PS_EXCM_MASK 0x00000010
-#define PS_EXCM PS_EXCM_MASK
-#define PS_INTLEVEL_SHIFT 0
-#define PS_INTLEVEL_MASK 0x0000000F
-#define PS_INTLEVEL(n) ((n)&PS_INTLEVEL_MASK) /* n = 0..15 */
-/* Backward compatibility (deprecated): */
-#define PS_PROGSTACK_SHIFT PS_UM_SHIFT
-#define PS_PROGSTACK_MASK PS_UM_MASK
-#define PS_PROG_SHIFT PS_UM_SHIFT
-#define PS_PROG_MASK PS_UM_MASK
-#define PS_PROG PS_UM
-
-/* DBREAKCn register fields: */
-#define DBREAKC_MASK_SHIFT 0
-#define DBREAKC_MASK_MASK 0x0000003F
-#define DBREAKC_LOADBREAK_SHIFT 30
-#define DBREAKC_LOADBREAK_MASK 0x40000000
-#define DBREAKC_STOREBREAK_SHIFT 31
-#define DBREAKC_STOREBREAK_MASK 0x80000000
-
-/* DEBUGCAUSE register fields: */
-#define DEBUGCAUSE_DEBUGINT_SHIFT 5
-#define DEBUGCAUSE_DEBUGINT_MASK 0x20 /* debug interrupt */
-#define DEBUGCAUSE_BREAKN_SHIFT 4
-#define DEBUGCAUSE_BREAKN_MASK 0x10 /* BREAK.N instruction */
-#define DEBUGCAUSE_BREAK_SHIFT 3
-#define DEBUGCAUSE_BREAK_MASK 0x08 /* BREAK instruction */
-#define DEBUGCAUSE_DBREAK_SHIFT 2
-#define DEBUGCAUSE_DBREAK_MASK 0x04 /* DBREAK match */
-#define DEBUGCAUSE_IBREAK_SHIFT 1
-#define DEBUGCAUSE_IBREAK_MASK 0x02 /* IBREAK match */
-#define DEBUGCAUSE_ICOUNT_SHIFT 0
-#define DEBUGCAUSE_ICOUNT_MASK 0x01 /* ICOUNT would increment to zero */
-
-#endif /*XTENSA_COREBITS_H*/
-
+++ /dev/null
-#ifndef XTENSA_HAL_H
-#define XTENSA_HAL_H
-
-/*
- * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
- *
- * include/asm-xtensa/xtensa/hal.h -- contains a definition of the
- * Core HAL interface.
- *
- * All definitions in this header file are independent of any specific
- * Xtensa processor configuration. Thus an OS or other software can
- * include this header file and be compiled into configuration-
- * independent objects that can be distributed and eventually linked
- * to the HAL library (libhal.a) to create a configuration-specific
- * final executable.
- *
- * Certain definitions, however, are release-specific -- such as the
- * XTHAL_RELEASE_xxx macros (or additions made in later releases).
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002 Tensilica Inc.
- */
-
-
-/*----------------------------------------------------------------------
- Constant Definitions
- (shared with assembly)
- ----------------------------------------------------------------------*/
-
-/* Software release information (not configuration-specific!): */
-#define XTHAL_RELEASE_MAJOR 1050
-#define XTHAL_RELEASE_MINOR 0
-#define XTHAL_RELEASE_NAME "T1050.0-2002-08-06-eng0"
-#define XTHAL_RELEASE_INTERNAL "2002-08-06-eng0"
-#define XTHAL_REL_T1050 1
-#define XTHAL_REL_T1050_0 1
-#define XTHAL_REL_T1050_0_2002 1
-#define XTHAL_REL_T1050_0_2002_08 1
-#define XTHAL_REL_T1050_0_2002_08_06 1
-#define XTHAL_REL_T1050_0_2002_08_06_ENG0 1
-
-/* HAL version numbers (these names are for backward compatibility): */
-#define XTHAL_MAJOR_REV XTHAL_RELEASE_MAJOR
-#define XTHAL_MINOR_REV XTHAL_RELEASE_MINOR
-/*
- * A bit of software release history on values of XTHAL_{MAJOR,MINOR}_REV:
- *
- * Release MAJOR MINOR Comment
- * ======= ===== ===== =======
- * T1015.n n/a n/a (HAL not yet available)
- * T1020.{0,1,2} 0 1 (HAL beta)
- * T1020.{3,4} 0 2 First release.
- * T1020.n (n>4) 0 2 or >3 (TBD)
- * T1030.0 0 1 (HAL beta)
- * T1030.{1,2} 0 3 Equivalent to first release.
- * T1030.n (n>=3) 0 >= 3 (TBD)
- * T1040.n 1040 n Full CHAL available from T1040.2
- * T1050.n 1050 n Current release.
- *
- *
- * Note: there is a distinction between the software release with
- * which something is compiled (accessible using XTHAL_RELEASE_* macros)
- * and the software release with which the HAL library was compiled
- * (accessible using Xthal_release_* global variables). This
- * distinction is particularly relevant for vendors that distribute
- * configuration-independent binaries (eg. an OS), where their customer
- * might link it with a HAL of a different Xtensa software release.
- * In this case, it may be appropriate for the OS to verify at run-time
- * whether XTHAL_RELEASE_* and Xthal_release_* are compatible.
- * [Guidelines as to which release is compatible with which are not
- * currently provided explicitly, but might be inferred from reading
- * OSKit documentation for all releases -- compatibility is also highly
- * dependent on which HAL features are used. Each release is usually
- * backward compatible, with very few exceptions if any.]
- *
- * Notes:
- * Tornado 2.0 supported in T1020.3+, T1030.1+, and T1040.{0,1} only.
- * Tornado 2.0.2 supported in T1040.2+, and T1050.
- * Compile-time HAL port of NucleusPlus supported by T1040.2+ and T1050.
- */
-
-
-/*
- * Architectural limits, independent of configuration.
- * Note that these are ISA-defined limits, not micro-architecture implementation
- * limits enforced by the Xtensa Processor Generator (which may be stricter than
- * these below).
- */
-#define XTHAL_MAX_CPS 8 /* max number of coprocessors (0..7) */
-#define XTHAL_MAX_INTERRUPTS 32 /* max number of interrupts (0..31) */
-#define XTHAL_MAX_INTLEVELS 16 /* max number of interrupt levels (0..15) */
- /* (as of T1040, implementation limit is 7: 0..6) */
-#define XTHAL_MAX_TIMERS 4 /* max number of timers (CCOMPARE0..CCOMPARE3) */
- /* (as of T1040, implementation limit is 3: 0..2) */
-
-/* Misc: */
-#define XTHAL_LITTLEENDIAN 0
-#define XTHAL_BIGENDIAN 1
-
-
-/* Interrupt types: */
-#define XTHAL_INTTYPE_UNCONFIGURED 0
-#define XTHAL_INTTYPE_SOFTWARE 1
-#define XTHAL_INTTYPE_EXTERN_EDGE 2
-#define XTHAL_INTTYPE_EXTERN_LEVEL 3
-#define XTHAL_INTTYPE_TIMER 4
-#define XTHAL_INTTYPE_NMI 5
-#define XTHAL_MAX_INTTYPES 6 /* number of interrupt types */
-
-/* Timer related: */
-#define XTHAL_TIMER_UNCONFIGURED -1 /* Xthal_timer_interrupt[] value for non-existent timers */
-#define XTHAL_TIMER_UNASSIGNED XTHAL_TIMER_UNCONFIGURED /* (for backwards compatibility only) */
-
-
-/* Access Mode bits (tentative): */ /* bit abbr unit short_name PPC equ - Description */
-#define XTHAL_AMB_EXCEPTION 0 /* 001 E EX fls: EXception none - generate exception on any access (aka "illegal") */
-#define XTHAL_AMB_HITCACHE 1 /* 002 C CH fls: use Cache on Hit ~(I CI) - use cache on hit -- way from tag match [or H HC, or U UC] (ISA: same, except for Isolate case) */
-#define XTHAL_AMB_ALLOCATE 2 /* 004 A AL fl?: ALlocate none - refill cache on miss -- way from LRU [or F FI fill] (ISA: Read/Write Miss Refill) */
-#define XTHAL_AMB_WRITETHRU 3 /* 008 W WT --s: WriteThrough W WT - store immediately to memory (ISA: same) */
-#define XTHAL_AMB_ISOLATE 4 /* 010 I IS fls: ISolate none - use cache regardless of hit-vs-miss -- way from vaddr (ISA: use-cache-on-miss+hit) */
-#define XTHAL_AMB_GUARD 5 /* 020 G GU ?l?: GUard G * - non-speculative; spec/replay refs not permitted */
-#if 0
-#define XTHAL_AMB_ORDERED x /* 000 O OR fls: ORdered G * - mem accesses cannot be out of order */
-#define XTHAL_AMB_FUSEWRITES x /* 000 F FW --s: FuseWrites none - allow combining/merging multiple writes (to same datapath data unit) into one (implied by writeback) */
-#define XTHAL_AMB_COHERENT x /* 000 M MC fl?: Mem/MP Coherent M - on reads, other CPUs/bus-masters may need to supply data */
-#define XTHAL_AMB_TRUSTED x /* 000 T TR ?l?: TRusted none - memory will not bus error (if it does, handle as fatal imprecise interrupt) */
-#define XTHAL_AMB_PREFETCH x /* 000 P PR fl?: PRefetch none - on refill, read line+1 into prefetch buffers */
-#define XTHAL_AMB_STREAM x /* 000 S ST ???: STreaming none - access one of N stream buffers */
-#endif /*0*/
-
-#define XTHAL_AM_EXCEPTION (1<<XTHAL_AMB_EXCEPTION)
-#define XTHAL_AM_HITCACHE (1<<XTHAL_AMB_HITCACHE)
-#define XTHAL_AM_ALLOCATE (1<<XTHAL_AMB_ALLOCATE)
-#define XTHAL_AM_WRITETHRU (1<<XTHAL_AMB_WRITETHRU)
-#define XTHAL_AM_ISOLATE (1<<XTHAL_AMB_ISOLATE)
-#define XTHAL_AM_GUARD (1<<XTHAL_AMB_GUARD)
-#if 0
-#define XTHAL_AM_ORDERED (1<<XTHAL_AMB_ORDERED)
-#define XTHAL_AM_FUSEWRITES (1<<XTHAL_AMB_FUSEWRITES)
-#define XTHAL_AM_COHERENT (1<<XTHAL_AMB_COHERENT)
-#define XTHAL_AM_TRUSTED (1<<XTHAL_AMB_TRUSTED)
-#define XTHAL_AM_PREFETCH (1<<XTHAL_AMB_PREFETCH)
-#define XTHAL_AM_STREAM (1<<XTHAL_AMB_STREAM)
-#endif /*0*/
-
-/*
- * Allowed Access Modes (bit combinations).
- *
- * Columns are:
- * "FOGIWACE"
- * Access mode bits (see XTHAL_AMB_xxx above).
- * <letter> = bit is set
- * '-' = bit is clear
- * '.' = bit is irrelevant / don't care, as follows:
- * E=1 makes all others irrelevant
- * W,F relevant only for stores
- * "2345"
- * Indicates which Xtensa releases support the corresponding
- * access mode. Releases for each character column are:
- * 2 = prior to T1020.2: T1015 (V1.5), T1020.0, T1020.1
- * 3 = T1020.2 and later: T1020.2+, T1030
- * 4 = T1040
- * 5 = T1050 (maybe)
- * And the character column contents are:
- * <number> = support by release(s)
- * "." = unsupported by release(s)
- * "?" = support unknown
- */
- /* FOGIWACE 2345 */
-/* For instruction fetch: */
-#define XTHAL_FAM_EXCEPTION 0x001 /* .......E 2345 exception */
-#define XTHAL_FAM_ISOLATE 0x012 /* .--I.-C- .... isolate */
-#define XTHAL_FAM_BYPASS 0x000 /* .---.--- 2345 bypass */
-#define XTHAL_FAM_NACACHED 0x002 /* .---.-C- .... cached no-allocate (frozen) */
-#define XTHAL_FAM_CACHED 0x006 /* .---.AC- 2345 cached */
-/* For data load: */
-#define XTHAL_LAM_EXCEPTION 0x001 /* .......E 2345 exception */
-#define XTHAL_LAM_ISOLATE 0x012 /* .--I.-C- 2345 isolate */
-#define XTHAL_LAM_BYPASS 0x000 /* .O--.--- 2... bypass speculative */
-#define XTHAL_LAM_BYPASSG 0x020 /* .OG-.--- .345 bypass guarded */
-#define XTHAL_LAM_NACACHED 0x002 /* .O--.-C- 2... cached no-allocate speculative */
-#define XTHAL_LAM_NACACHEDG 0x022 /* .OG-.-C- .345 cached no-allocate guarded */
-#define XTHAL_LAM_CACHED 0x006 /* .---.AC- 2345 cached speculative */
-#define XTHAL_LAM_CACHEDG 0x026 /* .?G-.AC- .... cached guarded */
-/* For data store: */
-#define XTHAL_SAM_EXCEPTION 0x001 /* .......E 2345 exception */
-#define XTHAL_SAM_ISOLATE 0x032 /* .-GI--C- 2345 isolate */
-#define XTHAL_SAM_BYPASS 0x028 /* -OG-W--- 2345 bypass */
-/*efine XTHAL_SAM_BYPASSF 0x028*/ /* F-G-W--- ...? bypass write-combined */
-#define XTHAL_SAM_WRITETHRU 0x02A /* -OG-W-C- 234? writethrough */
-/*efine XTHAL_SAM_WRITETHRUF 0x02A*/ /* F-G-W-C- ...5 writethrough write-combined */
-#define XTHAL_SAM_WRITEALLOC 0x02E /* -OG-WAC- ...? writethrough-allocate */
-/*efine XTHAL_SAM_WRITEALLOCF 0x02E*/ /* F-G-WAC- ...? writethrough-allocate write-combined */
-#define XTHAL_SAM_WRITEBACK 0x026 /* F-G--AC- ...5 writeback */
-
-#if 0
-/*
- Cache attribute encoding for CACHEATTR (per ISA):
- (Note: if this differs from ISA Ref Manual, ISA has precedence)
-
- Inst-fetches Loads Stores
- ------------- ------------ -------------
-0x0 FCA_EXCEPTION ?LCA_NACACHED_G* SCA_WRITETHRU "uncached"
-0x1 FCA_CACHED LCA_CACHED SCA_WRITETHRU cached
-0x2 FCA_BYPASS LCA_BYPASS_G* SCA_BYPASS bypass
-0x3 FCA_CACHED LCA_CACHED SCA_WRITEALLOCF write-allocate
- or LCA_EXCEPTION SCA_EXCEPTION (if unimplemented)
-0x4 FCA_CACHED LCA_CACHED SCA_WRITEBACK write-back
- or LCA_EXCEPTION SCA_EXCEPTION (if unimplemented)
-0x5..D FCA_EXCEPTION LCA_EXCEPTION SCA_EXCEPTION (reserved)
-0xE FCA_EXCEPTION LCA_ISOLATE SCA_ISOLATE isolate
-0xF FCA_EXCEPTION LCA_EXCEPTION SCA_EXCEPTION illegal
- * Prior to T1020.2?, guard feature not supported, this defaulted to speculative (no _G)
-*/
-#endif /*0*/
-
-
-#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE)
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*----------------------------------------------------------------------
- HAL
- ----------------------------------------------------------------------*/
-
-/* Constant to be checked in build = (XTHAL_MAJOR_REV<<16)|XTHAL_MINOR_REV */
-extern const unsigned int Xthal_rev_no;
-
-
-/*----------------------------------------------------------------------
- Processor State
- ----------------------------------------------------------------------*/
-/* save & restore the extra processor state */
-extern void xthal_save_extra(void *base);
-extern void xthal_restore_extra(void *base);
-
-extern void xthal_save_cpregs(void *base, int);
-extern void xthal_restore_cpregs(void *base, int);
-
-/*extern void xthal_save_all_extra(void *base);*/
-/*extern void xthal_restore_all_extra(void *base);*/
-
-/* space for processor state */
-extern const unsigned int Xthal_extra_size;
-extern const unsigned int Xthal_extra_align;
-/* space for TIE register files */
-extern const unsigned int Xthal_cpregs_size[XTHAL_MAX_CPS];
-extern const unsigned int Xthal_cpregs_align[XTHAL_MAX_CPS];
-
-/* total of space for the processor state (for Tor2) */
-extern const unsigned int Xthal_all_extra_size;
-extern const unsigned int Xthal_all_extra_align;
-
-/* initialize the extra processor */
-/*extern void xthal_init_extra(void);*/
-/* initialize the TIE coprocessor */
-/*extern void xthal_init_cp(int);*/
-
-/* initialize the extra processor */
-extern void xthal_init_mem_extra(void *);
-/* initialize the TIE coprocessor */
-extern void xthal_init_mem_cp(void *, int);
-
-/* validate & invalidate the TIE register file */
-extern void xthal_validate_cp(int);
-extern void xthal_invalidate_cp(int);
-
-/* the number of TIE coprocessors contiguous from zero (for Tor2) */
-extern const unsigned int Xthal_num_coprocessors;
-
-/* actual number of coprocessors */
-extern const unsigned char Xthal_cp_num;
-/* index of highest numbered coprocessor, plus one */
-extern const unsigned char Xthal_cp_max;
-/* index of highest allowed coprocessor number, per cfg, plus one */
-/*extern const unsigned char Xthal_cp_maxcfg;*/
-/* bitmask of which coprocessors are present */
-extern const unsigned int Xthal_cp_mask;
-
-/* read and write cpenable register */
-extern void xthal_set_cpenable(unsigned);
-extern unsigned xthal_get_cpenable(void);
-
-/* read & write extra state register */
-/*extern int xthal_read_extra(void *base, unsigned reg, unsigned *value);*/
-/*extern int xthal_write_extra(void *base, unsigned reg, unsigned value);*/
-
-/* read & write a TIE coprocessor register */
-/*extern int xthal_read_cpreg(void *base, int cp, unsigned reg, unsigned *value);*/
-/*extern int xthal_write_cpreg(void *base, int cp, unsigned reg, unsigned value);*/
-
-/* return coprocessor number based on register */
-/*extern int xthal_which_cp(unsigned reg);*/
-
-/*----------------------------------------------------------------------
- Interrupts
- ----------------------------------------------------------------------*/
-
-/* the number of interrupt levels */
-extern const unsigned char Xthal_num_intlevels;
-/* the number of interrupts */
-extern const unsigned char Xthal_num_interrupts;
-
-/* mask for level of interrupts */
-extern const unsigned int Xthal_intlevel_mask[XTHAL_MAX_INTLEVELS];
-/* mask for level 0 to N interrupts */
-extern const unsigned int Xthal_intlevel_andbelow_mask[XTHAL_MAX_INTLEVELS];
-
-/* level of each interrupt */
-extern const unsigned char Xthal_intlevel[XTHAL_MAX_INTERRUPTS];
-
-/* type per interrupt */
-extern const unsigned char Xthal_inttype[XTHAL_MAX_INTERRUPTS];
-
-/* masks of each type of interrupt */
-extern const unsigned int Xthal_inttype_mask[XTHAL_MAX_INTTYPES];
-
-/* interrupt numbers assigned to each timer interrupt */
-extern const int Xthal_timer_interrupt[XTHAL_MAX_TIMERS];
-
-/*** Virtual interrupt prioritization: ***/
-
-/* Convert between interrupt levels (as per PS.INTLEVEL) and virtual interrupt priorities: */
-extern unsigned xthal_vpri_to_intlevel(unsigned vpri);
-extern unsigned xthal_intlevel_to_vpri(unsigned intlevel);
-
-/* Enables/disables given set (mask) of interrupts; returns previous enabled-mask of all ints: */
-extern unsigned xthal_int_enable(unsigned);
-extern unsigned xthal_int_disable(unsigned);
-
-/* Set/get virtual priority of an interrupt: */
-extern int xthal_set_int_vpri(int intnum, int vpri);
-extern int xthal_get_int_vpri(int intnum);
-
-/* Set/get interrupt lockout level for exclusive access to virtual priority data structures: */
-extern void xthal_set_vpri_locklevel(unsigned intlevel);
-extern unsigned xthal_get_vpri_locklevel(void);
-
-/* Set/get current virtual interrupt priority: */
-extern unsigned xthal_set_vpri(unsigned vpri);
-extern unsigned xthal_get_vpri(unsigned vpri);
-extern unsigned xthal_set_vpri_intlevel(unsigned intlevel);
-extern unsigned xthal_set_vpri_lock(void);
-
-
-
-/*----------------------------------------------------------------------
- Generic Interrupt Trampolining Support
- ----------------------------------------------------------------------*/
-
-typedef void (XtHalVoidFunc)(void);
-
-/*
- * Bitmask of interrupts currently trampolining down:
- */
-extern unsigned Xthal_tram_pending;
-
-/*
- * Bitmask of which interrupts currently trampolining down
- * synchronously are actually enabled; this bitmask is necessary
- * because INTENABLE cannot hold that state (sync-trampolining
- * interrupts must be kept disabled while trampolining);
- * in the current implementation, any bit set here is not set
- * in INTENABLE, and vice-versa; once a sync-trampoline is
- * handled (at level one), its enable bit must be moved from
- * here to INTENABLE:
- */
-extern unsigned Xthal_tram_enabled;
-
-/*
- * Bitmask of interrupts configured for sync trampolining:
- */
-extern unsigned Xthal_tram_sync;
-
-
-/* Trampoline support functions: */
-extern unsigned xthal_tram_pending_to_service( void );
-extern void xthal_tram_done( unsigned serviced_mask );
-extern int xthal_tram_set_sync( int intnum, int sync );
-extern XtHalVoidFunc* xthal_set_tram_trigger_func( XtHalVoidFunc *trigger_fn );
-
-/* INTENABLE,INTREAD,INTSET,INTCLEAR register access functions: */
-extern unsigned xthal_get_intenable( void );
-extern void xthal_set_intenable( unsigned );
-extern unsigned xthal_get_intread( void );
-extern void xthal_set_intset( unsigned );
-extern void xthal_set_intclear( unsigned );
-
-
-/*----------------------------------------------------------------------
- Register Windows
- ----------------------------------------------------------------------*/
-
-/* number of registers in register window */
-extern const unsigned int Xthal_num_aregs;
-extern const unsigned char Xthal_num_aregs_log2;
-
-/* This spill any live register windows (other than the caller's): */
-extern void xthal_window_spill( void );
-
-
-/*----------------------------------------------------------------------
- Cache
- ----------------------------------------------------------------------*/
-
-/* size of the cache lines in log2(bytes) */
-extern const unsigned char Xthal_icache_linewidth;
-extern const unsigned char Xthal_dcache_linewidth;
-/* size of the cache lines in bytes */
-extern const unsigned short Xthal_icache_linesize;
-extern const unsigned short Xthal_dcache_linesize;
-/* number of cache sets in log2(lines per way) */
-extern const unsigned char Xthal_icache_setwidth;
-extern const unsigned char Xthal_dcache_setwidth;
-/* cache set associativity (number of ways) */
-extern const unsigned int Xthal_icache_ways;
-extern const unsigned int Xthal_dcache_ways;
-/* size of the caches in bytes (ways * 2^(linewidth + setwidth)) */
-extern const unsigned int Xthal_icache_size;
-extern const unsigned int Xthal_dcache_size;
-/* cache features */
-extern const unsigned char Xthal_dcache_is_writeback;
-extern const unsigned char Xthal_icache_line_lockable;
-extern const unsigned char Xthal_dcache_line_lockable;
-
-/* cache attribute register control (used by other HAL routines) */
-extern unsigned xthal_get_cacheattr( void );
-extern unsigned xthal_get_icacheattr( void );
-extern unsigned xthal_get_dcacheattr( void );
-extern void xthal_set_cacheattr( unsigned );
-extern void xthal_set_icacheattr( unsigned );
-extern void xthal_set_dcacheattr( unsigned );
-
-/* initialize cache support (must be called once at startup, before all other cache calls) */
-/*extern void xthal_cache_startinit( void );*/
-/* reset caches */
-/*extern void xthal_icache_reset( void );*/
-/*extern void xthal_dcache_reset( void );*/
-/* enable caches */
-extern void xthal_icache_enable( void ); /* DEPRECATED */
-extern void xthal_dcache_enable( void ); /* DEPRECATED */
-/* disable caches */
-extern void xthal_icache_disable( void ); /* DEPRECATED */
-extern void xthal_dcache_disable( void ); /* DEPRECATED */
-
-/* invalidate the caches */
-extern void xthal_icache_all_invalidate( void );
-extern void xthal_dcache_all_invalidate( void );
-extern void xthal_icache_region_invalidate( void *addr, unsigned size );
-extern void xthal_dcache_region_invalidate( void *addr, unsigned size );
-extern void xthal_icache_line_invalidate(void *addr);
-extern void xthal_dcache_line_invalidate(void *addr);
-/* write dirty data back */
-extern void xthal_dcache_all_writeback( void );
-extern void xthal_dcache_region_writeback( void *addr, unsigned size );
-extern void xthal_dcache_line_writeback(void *addr);
-/* write dirty data back and invalidate */
-extern void xthal_dcache_all_writeback_inv( void );
-extern void xthal_dcache_region_writeback_inv( void *addr, unsigned size );
-extern void xthal_dcache_line_writeback_inv(void *addr);
-/* prefetch and lock specified memory range into cache */
-extern void xthal_icache_region_lock( void *addr, unsigned size );
-extern void xthal_dcache_region_lock( void *addr, unsigned size );
-extern void xthal_icache_line_lock(void *addr);
-extern void xthal_dcache_line_lock(void *addr);
-/* unlock from cache */
-extern void xthal_icache_all_unlock( void );
-extern void xthal_dcache_all_unlock( void );
-extern void xthal_icache_region_unlock( void *addr, unsigned size );
-extern void xthal_dcache_region_unlock( void *addr, unsigned size );
-extern void xthal_icache_line_unlock(void *addr);
-extern void xthal_dcache_line_unlock(void *addr);
-
-
-/* sync icache and memory */
-extern void xthal_icache_sync( void );
-/* sync dcache and memory */
-extern void xthal_dcache_sync( void );
-
-/*----------------------------------------------------------------------
- Debug
- ----------------------------------------------------------------------*/
-
-/* 1 if debug option configured, 0 if not: */
-extern const int Xthal_debug_configured;
-
-/* Number of instruction and data break registers: */
-extern const int Xthal_num_ibreak;
-extern const int Xthal_num_dbreak;
-
-/* Set (plant) and remove software breakpoint, both synchronizing cache: */
-extern unsigned int xthal_set_soft_break(void *addr);
-extern void xthal_remove_soft_break(void *addr, unsigned int);
-
-
-/*----------------------------------------------------------------------
- Disassembler
- ----------------------------------------------------------------------*/
-
-/* Max expected size of the return buffer for a disassembled instruction (hint only): */
-#define XTHAL_DISASM_BUFSIZE 80
-
-/* Disassembly option bits for selecting what to return: */
-#define XTHAL_DISASM_OPT_ADDR 0x0001 /* display address */
-#define XTHAL_DISASM_OPT_OPHEX 0x0002 /* display opcode bytes in hex */
-#define XTHAL_DISASM_OPT_OPCODE 0x0004 /* display opcode name (mnemonic) */
-#define XTHAL_DISASM_OPT_PARMS 0x0008 /* display parameters */
-#define XTHAL_DISASM_OPT_ALL 0x0FFF /* display everything */
-
-/* routine to get a string for the disassembled instruction */
-extern int xthal_disassemble( unsigned char *instr_buf, void *tgt_addr,
- char *buffer, unsigned buflen, unsigned options );
-
-/* routine to get the size of the next instruction. Returns 0 for
- illegal instruction */
-extern int xthal_disassemble_size( unsigned char *instr_buf );
-
-
-/*----------------------------------------------------------------------
- Core Counter
- ----------------------------------------------------------------------*/
-
-/* counter info */
-extern const unsigned char Xthal_have_ccount; /* set if CCOUNT register present */
-extern const unsigned char Xthal_num_ccompare; /* number of CCOMPAREn registers */
-
-/* get CCOUNT register (if not present return 0) */
-extern unsigned xthal_get_ccount(void);
-
-/* set and get CCOMPAREn registers (if not present, get returns 0) */
-extern void xthal_set_ccompare(int, unsigned);
-extern unsigned xthal_get_ccompare(int);
-
-
-/*----------------------------------------------------------------------
- Instruction/Data RAM/ROM Access
- ----------------------------------------------------------------------*/
-
-extern void* xthal_memcpy(void *dst, const void *src, unsigned len);
-extern void* xthal_bcopy(const void *src, void *dst, unsigned len);
-
-/*----------------------------------------------------------------------
- MP Synchronization
- ----------------------------------------------------------------------*/
-extern int xthal_compare_and_set( int *addr, int test_val, int compare_val );
-extern unsigned xthal_get_prid( void );
-
-/*extern const char Xthal_have_s32c1i;*/
-extern const unsigned char Xthal_have_prid;
-
-
-/*----------------------------------------------------------------------
- Miscellaneous
- ----------------------------------------------------------------------*/
-
-extern const unsigned int Xthal_release_major;
-extern const unsigned int Xthal_release_minor;
-extern const char * const Xthal_release_name;
-extern const char * const Xthal_release_internal;
-
-extern const unsigned char Xthal_memory_order;
-extern const unsigned char Xthal_have_windowed;
-extern const unsigned char Xthal_have_density;
-extern const unsigned char Xthal_have_booleans;
-extern const unsigned char Xthal_have_loops;
-extern const unsigned char Xthal_have_nsa;
-extern const unsigned char Xthal_have_minmax;
-extern const unsigned char Xthal_have_sext;
-extern const unsigned char Xthal_have_clamps;
-extern const unsigned char Xthal_have_mac16;
-extern const unsigned char Xthal_have_mul16;
-extern const unsigned char Xthal_have_fp;
-extern const unsigned char Xthal_have_speculation;
-extern const unsigned char Xthal_have_exceptions;
-extern const unsigned char Xthal_xea_version;
-extern const unsigned char Xthal_have_interrupts;
-extern const unsigned char Xthal_have_highlevel_interrupts;
-extern const unsigned char Xthal_have_nmi;
-
-extern const unsigned short Xthal_num_writebuffer_entries;
-
-extern const unsigned int Xthal_build_unique_id;
-/* Release info for hardware targeted by software upgrades: */
-extern const unsigned int Xthal_hw_configid0;
-extern const unsigned int Xthal_hw_configid1;
-extern const unsigned int Xthal_hw_release_major;
-extern const unsigned int Xthal_hw_release_minor;
-extern const char * const Xthal_hw_release_name;
-extern const char * const Xthal_hw_release_internal;
-
-
-/* Internal memories... */
-
-extern const unsigned char Xthal_num_instrom;
-extern const unsigned char Xthal_num_instram;
-extern const unsigned char Xthal_num_datarom;
-extern const unsigned char Xthal_num_dataram;
-extern const unsigned char Xthal_num_xlmi;
-extern const unsigned int Xthal_instrom_vaddr[1];
-extern const unsigned int Xthal_instrom_paddr[1];
-extern const unsigned int Xthal_instrom_size [1];
-extern const unsigned int Xthal_instram_vaddr[1];
-extern const unsigned int Xthal_instram_paddr[1];
-extern const unsigned int Xthal_instram_size [1];
-extern const unsigned int Xthal_datarom_vaddr[1];
-extern const unsigned int Xthal_datarom_paddr[1];
-extern const unsigned int Xthal_datarom_size [1];
-extern const unsigned int Xthal_dataram_vaddr[1];
-extern const unsigned int Xthal_dataram_paddr[1];
-extern const unsigned int Xthal_dataram_size [1];
-extern const unsigned int Xthal_xlmi_vaddr[1];
-extern const unsigned int Xthal_xlmi_paddr[1];
-extern const unsigned int Xthal_xlmi_size [1];
-
-
-
-/*----------------------------------------------------------------------
- Memory Management Unit
- ----------------------------------------------------------------------*/
-
-extern const unsigned char Xthal_have_spanning_way;
-extern const unsigned char Xthal_have_identity_map;
-extern const unsigned char Xthal_have_mimic_cacheattr;
-extern const unsigned char Xthal_have_xlt_cacheattr;
-extern const unsigned char Xthal_have_cacheattr;
-extern const unsigned char Xthal_have_tlbs;
-
-extern const unsigned char Xthal_mmu_asid_bits; /* 0 .. 8 */
-extern const unsigned char Xthal_mmu_asid_kernel;
-extern const unsigned char Xthal_mmu_rings; /* 1 .. 4 (perhaps 0 if no MMU and/or no protection?) */
-extern const unsigned char Xthal_mmu_ring_bits;
-extern const unsigned char Xthal_mmu_sr_bits;
-extern const unsigned char Xthal_mmu_ca_bits;
-extern const unsigned int Xthal_mmu_max_pte_page_size;
-extern const unsigned int Xthal_mmu_min_pte_page_size;
-
-extern const unsigned char Xthal_itlb_way_bits;
-extern const unsigned char Xthal_itlb_ways;
-extern const unsigned char Xthal_itlb_arf_ways;
-extern const unsigned char Xthal_dtlb_way_bits;
-extern const unsigned char Xthal_dtlb_ways;
-extern const unsigned char Xthal_dtlb_arf_ways;
-
-/* Convert between virtual and physical addresses (through static maps only): */
-/*** WARNING: these two functions may go away in a future release; don't depend on them! ***/
-extern int xthal_static_v2p( unsigned vaddr, unsigned *paddrp );
-extern int xthal_static_p2v( unsigned paddr, unsigned *vaddrp, unsigned cached );
-
-#if 0
-/******************* EXPERIMENTAL AND TENTATIVE ONLY ********************/
-
-#define XTHAL_MMU_PAGESZ_COUNT_MAX 8 /* maximum number of different page sizes */
-extern const char Xthal_mmu_pagesz_count; /* 0 .. 8 number of different page sizes configured */
-
-/* Note: the following table doesn't necessarily have page sizes in increasing order: */
-extern const char Xthal_mmu_pagesz_log2[XTHAL_MMU_PAGESZ_COUNT_MAX]; /* 10 .. 28 (0 past count) */
-
-/* Sorted (increasing) table of page sizes, that indexes into the above table: */
-extern const char Xthal_mmu_pagesz_sorted[XTHAL_MMU_PAGESZ_COUNT_MAX]; /* 0 .. 7 (0 past count) */
-
-/*u32 Xthal_virtual_exceptions;*/ /* bitmask of which exceptions execute in virtual mode... */
-
-extern const char Xthal_mmu_pte_pagesz_log2_min; /* ?? minimum page size in PTEs */
-extern const char Xthal_mmu_pte_pagesz_log2_max; /* ?? maximum page size in PTEs */
-
-/* Cache Attribute Bits Implemented by the Cache (part of the cache abstraction) */
-extern const char Xthal_icache_fca_bits_implemented; /* ITLB/UTLB only! */
-extern const char Xthal_dcache_lca_bits_implemented; /* DTLB/UTLB only! */
-extern const char Xthal_dcache_sca_bits_implemented; /* DTLB/UTLB only! */
-
-/* Per TLB Parameters (Instruction, Data, Unified) */
-struct XtHalMmuTlb Xthal_itlb; /* description of MMU I-TLB generic features */
-struct XtHalMmuTlb Xthal_dtlb; /* description of MMU D-TLB generic features */
-struct XtHalMmuTlb Xthal_utlb; /* description of MMU U-TLB generic features */
-
-#define XTHAL_MMU_WAYS_MAX 8 /* maximum number of ways (associativities) for each TLB */
-
-/* Structure for common information described for each possible TLB (instruction, data and unified): */
-typedef struct XtHalMmuTlb {
- u8 va_bits; /* 32 (number of virtual address bits) */
- u8 pa_bits; /* 32 (number of physical address bits) */
- bool tlb_va_indexed; /* 1 (set if TLB is indexed by virtual address) */
- bool tlb_va_tagged; /* 0 (set if TLB is tagged by virtual address) */
- bool cache_va_indexed; /* 1 (set if cache is indexed by virtual address) */
- bool cache_va_tagged; /* 0 (set if cache is tagged by virtual address) */
- /*bool (whether page tables are traversed in vaddr sorted order, paddr sorted order, ...) */
- /*u8 (set of available page attribute bits, other than cache attribute bits defined above) */
- /*u32 (various masks for pages, MMU table/TLB entries, etc.) */
- u8 way_count; /* 0 .. 8 (number of ways, a.k.a. associativities, for this TLB) */
- XtHalMmuTlbWay * ways[XTHAL_MMU_WAYS_MAX]; /* pointers to per-way parms for each way */
-} XtHalMmuTlb;
-
-/* Per TLB Way (Per Associativity) Parameters */
-typedef struct XtHalMmuTlbWay {
- u32 index_count_log2; /* 0 .. 4 */
- u32 pagesz_mask; /* 0 .. 2^pagesz_count - 1 (each bit corresponds to a size */
- /* defined in the Xthal_mmu_pagesz_log2[] table) */
- u32 vpn_const_mask;
- u32 vpn_const_value;
- u64 ppn_const_mask; /* future may support pa_bits > 32 */
- u64 ppn_const_value;
- u32 ppn_id_mask; /* paddr bits taken directly from vaddr */
- bool backgnd_match; /* 0 or 1 */
- /* These are defined in terms of the XTHAL_CACHE_xxx bits: */
- u8 fca_const_mask; /* ITLB/UTLB only! */
- u8 fca_const_value; /* ITLB/UTLB only! */
- u8 lca_const_mask; /* DTLB/UTLB only! */
- u8 lca_const_value; /* DTLB/UTLB only! */
- u8 sca_const_mask; /* DTLB/UTLB only! */
- u8 sca_const_value; /* DTLB/UTLB only! */
- /* These define an encoding that map 5 bits in TLB and PTE entries to */
- /* 8 bits (FCA, ITLB), 16 bits (LCA+SCA, DTLB) or 24 bits (FCA+LCA+SCA, UTLB): */
- /* (they may be moved to struct XtHalMmuTlb) */
- u8 ca_bits; /* number of bits in TLB/PTE entries for cache attributes */
- u32 * ca_map; /* pointer to array of 2^ca_bits entries of FCA+LCA+SCA bits */
-} XtHalMmuTlbWay;
-
-/*
- * The way to determine whether protection support is present in core
- * is to [look at Xthal_mmu_rings ???].
- * Give info on memory requirements for MMU tables and other in-memory
- * data structures (globally, per task, base and per page, etc.) - whatever bounds can be calculated.
- */
-
-
-/* Default vectors: */
-xthal_immu_fetch_miss_vector
-xthal_dmmu_load_miss_vector
-xthal_dmmu_store_miss_vector
-
-/* Functions called when a fault is detected: */
-typedef void (XtHalMmuFaultFunc)( unsigned vaddr, ...context... );
-/* Or, */
-/* a? = vaddr */
-/* a? = context... */
-/* PS.xxx = xxx */
-XtHalMMuFaultFunc *Xthal_immu_fetch_fault_func;
-XtHalMMuFaultFunc *Xthal_dmmu_load_fault_func;
-XtHalMMuFaultFunc *Xthal_dmmu_store_fault_func;
-
-/* Default Handlers: */
-/* The user and/or kernel exception handlers may jump to these handlers to handle the relevant exceptions,
- * according to the value of EXCCAUSE. The exact register state on entry to these handlers is TBD. */
-/* When multiple TLB entries match (hit) on the same access: */
-xthal_immu_fetch_multihit_handler
-xthal_dmmu_load_multihit_handler
-xthal_dmmu_store_multihit_handler
-/* Protection violations according to cache attributes, and other cache attribute mismatches: */
-xthal_immu_fetch_attr_handler
-xthal_dmmu_load_attr_handler
-xthal_dmmu_store_attr_handler
-/* Protection violations due to insufficient ring level: */
-xthal_immu_fetch_priv_handler
-xthal_dmmu_load_priv_handler
-xthal_dmmu_store_priv_handler
-/* Alignment exception handlers (if supported by the particular Xtensa MMU configuration): */
-xthal_dmmu_load_align_handler
-xthal_dmmu_store_align_handler
-
-/* Or, alternatively, the OS user and/or kernel exception handlers may simply jump to the
- * following entry points which will handle any values of EXCCAUSE not handled by the OS: */
-xthal_user_exc_default_handler
-xthal_kernel_exc_default_handler
-
-#endif /*0*/
-
-#ifdef INCLUDE_DEPRECATED_HAL_CODE
-extern const unsigned char Xthal_have_old_exc_arch;
-extern const unsigned char Xthal_have_mmu;
-extern const unsigned int Xthal_num_regs;
-extern const unsigned char Xthal_num_iroms;
-extern const unsigned char Xthal_num_irams;
-extern const unsigned char Xthal_num_droms;
-extern const unsigned char Xthal_num_drams;
-extern const unsigned int Xthal_configid0;
-extern const unsigned int Xthal_configid1;
-#endif
-
-#ifdef INCLUDE_DEPRECATED_HAL_DEBUG_CODE
-#define XTHAL_24_BIT_BREAK 0x80000000
-#define XTHAL_16_BIT_BREAK 0x40000000
-extern const unsigned short Xthal_ill_inst_16[16];
-#define XTHAL_DEST_REG 0xf0000000 /* Mask for destination register */
-#define XTHAL_DEST_REG_INST 0x08000000 /* Branch address is in register */
-#define XTHAL_DEST_REL_INST 0x04000000 /* Branch address is relative */
-#define XTHAL_RFW_INST 0x00000800
-#define XTHAL_RFUE_INST 0x00000400
-#define XTHAL_RFI_INST 0x00000200
-#define XTHAL_RFE_INST 0x00000100
-#define XTHAL_RET_INST 0x00000080
-#define XTHAL_BREAK_INST 0x00000040
-#define XTHAL_SYSCALL_INST 0x00000020
-#define XTHAL_LOOP_END 0x00000010 /* Not set by xthal_inst_type */
-#define XTHAL_JUMP_INST 0x00000008 /* Call or jump instruction */
-#define XTHAL_BRANCH_INST 0x00000004 /* Branch instruction */
-#define XTHAL_24_BIT_INST 0x00000002
-#define XTHAL_16_BIT_INST 0x00000001
-typedef struct xthal_state {
- unsigned pc;
- unsigned ar[16];
- unsigned lbeg;
- unsigned lend;
- unsigned lcount;
- unsigned extra_ptr;
- unsigned cpregs_ptr[XTHAL_MAX_CPS];
-} XTHAL_STATE;
-extern unsigned int xthal_inst_type(void *addr);
-extern unsigned int xthal_branch_addr(void *addr);
-extern unsigned int xthal_get_npc(XTHAL_STATE *user_state);
-#endif /* INCLUDE_DEPRECATED_HAL_DEBUG_CODE */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /*!__ASSEMBLY__ */
-
-#endif /*XTENSA_HAL_H*/
-
+++ /dev/null
-#ifndef SIMCALL_INCLUDED
-#define SIMCALL_INCLUDED
-
-/*
- * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
- *
- * include/asm-xtensa/xtensa/simcall.h - Simulator call numbers
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- *
- * Copyright (C) 2002 Tensilica Inc.
- */
-
-
-/*
- * System call like services offered by the simulator host.
- * These are modeled after the Linux 2.4 kernel system calls
- * for Xtensa processors. However not all system calls and
- * not all functionality of a given system call are implemented,
- * or necessarily have well defined or equivalent semantics in
- * the context of a simulation (as opposed to a Unix kernel).
- *
- * These services behave largely as if they had been invoked
- * as a task in the simulator host's operating system
- * (eg. files accessed are those of the simulator host).
- * However, these SIMCALLs model a virtual operating system
- * so that various definitions, bit assignments etc
- * (eg. open mode bits, errno values, etc) are independent
- * of the host operating system used to run the simulation.
- * Rather these definitions are specific to the Xtensa ISS.
- * This way Xtensa ISA code written to use these SIMCALLs
- * can (in principle) be simulated on any host.
- *
- * Up to 6 parameters are passed in registers a3 to a8
- * (note the 6th parameter isn't passed on the stack,
- * unlike windowed function calling conventions).
- * The return value is in a2. A negative value in the
- * range -4096 to -1 indicates a negated error code to be
- * reported in errno with a return value of -1, otherwise
- * the value in a2 is returned as is.
- */
-
-/* These #defines need to match what's in Xtensa/OS/vxworks/xtiss/simcalls.c */
-
-#define SYS_nop 0 /* n/a - setup; used to flush register windows */
-#define SYS_exit 1 /*x*/
-#define SYS_fork 2
-#define SYS_read 3 /*x*/
-#define SYS_write 4 /*x*/
-#define SYS_open 5 /*x*/
-#define SYS_close 6 /*x*/
-#define SYS_rename 7 /*x 38 - waitpid */
-#define SYS_creat 8 /*x*/
-#define SYS_link 9 /*x (not implemented on WIN32) */
-#define SYS_unlink 10 /*x*/
-#define SYS_execv 11 /* n/a - execve */
-#define SYS_execve 12 /* 11 - chdir */
-#define SYS_pipe 13 /* 42 - time */
-#define SYS_stat 14 /* 106 - mknod */
-#define SYS_chmod 15
-#define SYS_chown 16 /* 202 - lchown */
-#define SYS_utime 17 /* 30 - break */
-#define SYS_wait 18 /* n/a - oldstat */
-#define SYS_lseek 19 /*x*/
-#define SYS_getpid 20
-#define SYS_isatty 21 /* n/a - mount */
-#define SYS_fstat 22 /* 108 - oldumount */
-#define SYS_time 23 /* 13 - setuid */
-#define SYS_gettimeofday 24 /*x 78 - getuid (not implemented on WIN32) */
-#define SYS_times 25 /*X 43 - stime (Xtensa-specific implementation) */
-#define SYS_socket 26
-#define SYS_sendto 27
-#define SYS_recvfrom 28
-#define SYS_select_one 29 /* not compitible select, one file descriptor at the time */
-#define SYS_bind 30
-#define SYS_ioctl 31
-
-/*
- * Other...
- */
-#define SYS_iss_argc 1000 /* returns value of argc */
-#define SYS_iss_argv_size 1001 /* bytes needed for argv & arg strings */
-#define SYS_iss_set_argv 1002 /* saves argv & arg strings at given addr */
-
-/*
- * SIMCALLs for the ferret memory debugger. All are invoked by
- * libferret.a ... ( Xtensa/Target-Libs/ferret )
- */
-#define SYS_ferret 1010
-#define SYS_malloc 1011
-#define SYS_free 1012
-#define SYS_more_heap 1013
-#define SYS_no_heap 1014
-
-
-/*
- * Extra SIMCALLs for GDB:
- */
-#define SYS_gdb_break -1 /* invoked by XTOS on user exceptions if EPC points
- to a break.n/break, regardless of cause! */
-#define SYS_xmon_out -2 /* invoked by XMON: ... */
-#define SYS_xmon_in -3 /* invoked by XMON: ... */
-#define SYS_xmon_flush -4 /* invoked by XMON: ... */
-#define SYS_gdb_abort -5 /* invoked by XTOS in _xtos_panic() */
-#define SYS_gdb_illegal_inst -6 /* invoked by XTOS for illegal instructions (too deeply) */
-#define SYS_xmon_init -7 /* invoked by XMON: ... */
-#define SYS_gdb_enter_sktloop -8 /* invoked by XTOS on debug exceptions */
-
-/*
- * SIMCALLs for vxWorks xtiss BSP:
- */
-#define SYS_setup_ppp_pipes -83
-#define SYS_log_msg -84
-
-/*
- * Test SIMCALLs:
- */
-#define SYS_test_write_state -100
-#define SYS_test_read_state -101
-
-/*
- * SYS_select_one specifiers
- */
-#define XTISS_SELECT_ONE_READ 1
-#define XTISS_SELECT_ONE_WRITE 2
-#define XTISS_SELECT_ONE_EXCEPT 3
-
-#endif /* !SIMCALL_INCLUDED */
+++ /dev/null
-#ifndef _uart_h_included_
-#define _uart_h_included_
-
-/*
- * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
- *
- * include/asm-xtensa/xtensa/xt2000-uart.h -- NatSemi PC16552D DUART
- * definitions
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002 Tensilica Inc.
- */
-
-
-#include <xtensa/xt2000.h>
-
-
-/* 16550 UART DEVICE REGISTERS
- The XT2000 board aligns each register to a 32-bit word but the UART device only uses
- one byte of the word, which is the least-significant byte regardless of the
- endianness of the core (ie. byte offset 0 for little-endian and 3 for big-endian).
- So if using word accesses then endianness doesn't matter.
- The macros provided here do that.
-*/
-struct uart_dev_s {
- union {
- unsigned int rxb; /* DLAB=0: receive buffer, read-only */
- unsigned int txb; /* DLAB=0: transmit buffer, write-only */
- unsigned int dll; /* DLAB=1: divisor, least-significant byte latch (was write-only?) */
- } w0;
- union {
- unsigned int ier; /* DLAB=0: interrupt-enable register (was write-only?) */
- unsigned int dlm; /* DLAB=1: divisor, most-significant byte latch (was write-only?) */
- } w1;
-
- union {
- unsigned int isr; /* DLAB=0: interrupt status register, read-only */
- unsigned int fcr; /* DLAB=0: FIFO control register, write-only */
- unsigned int afr; /* DLAB=1: alternate function register */
- } w2;
-
- unsigned int lcr; /* line control-register, write-only */
- unsigned int mcr; /* modem control-regsiter, write-only */
- unsigned int lsr; /* line status register, read-only */
- unsigned int msr; /* modem status register, read-only */
- unsigned int scr; /* scratch regsiter, read/write */
-};
-
-#define _RXB(u) ((u)->w0.rxb)
-#define _TXB(u) ((u)->w0.txb)
-#define _DLL(u) ((u)->w0.dll)
-#define _IER(u) ((u)->w1.ier)
-#define _DLM(u) ((u)->w1.dlm)
-#define _ISR(u) ((u)->w2.isr)
-#define _FCR(u) ((u)->w2.fcr)
-#define _AFR(u) ((u)->w2.afr)
-#define _LCR(u) ((u)->lcr)
-#define _MCR(u) ((u)->mcr)
-#define _LSR(u) ((u)->lsr)
-#define _MSR(u) ((u)->msr)
-#define _SCR(u) ((u)->scr)
-
-typedef volatile struct uart_dev_s uart_dev_t;
-
-/* IER bits */
-#define RCVR_DATA_REG_INTENABLE 0x01
-#define XMIT_HOLD_REG_INTENABLE 0x02
-#define RCVR_STATUS_INTENABLE 0x04
-#define MODEM_STATUS_INTENABLE 0x08
-
-/* FCR bits */
-#define _FIFO_ENABLE 0x01
-#define RCVR_FIFO_RESET 0x02
-#define XMIT_FIFO_RESET 0x04
-#define DMA_MODE_SELECT 0x08
-#define RCVR_TRIGGER_LSB 0x40
-#define RCVR_TRIGGER_MSB 0x80
-
-/* AFR bits */
-#define AFR_CONC_WRITE 0x01
-#define AFR_BAUDOUT_SEL 0x02
-#define AFR_RXRDY_SEL 0x04
-
-/* ISR bits */
-#define INT_STATUS(r) ((r)&1)
-#define INT_PRIORITY(r) (((r)>>1)&0x7)
-
-/* LCR bits */
-#define WORD_LENGTH(n) (((n)-5)&0x3)
-#define STOP_BIT_ENABLE 0x04
-#define PARITY_ENABLE 0x08
-#define EVEN_PARITY 0x10
-#define FORCE_PARITY 0x20
-#define XMIT_BREAK 0x40
-#define DLAB_ENABLE 0x80
-
-/* MCR bits */
-#define _DTR 0x01
-#define _RTS 0x02
-#define _OP1 0x04
-#define _OP2 0x08
-#define LOOP_BACK 0x10
-
-/* LSR Bits */
-#define RCVR_DATA_READY 0x01
-#define OVERRUN_ERROR 0x02
-#define PARITY_ERROR 0x04
-#define FRAMING_ERROR 0x08
-#define BREAK_INTERRUPT 0x10
-#define XMIT_HOLD_EMPTY 0x20
-#define XMIT_EMPTY 0x40
-#define FIFO_ERROR 0x80
-#define RCVR_READY(u) (_LSR(u)&RCVR_DATA_READY)
-#define XMIT_READY(u) (_LSR(u)&XMIT_HOLD_EMPTY)
-
-/* MSR bits */
-#define _RDR 0x01
-#define DELTA_DSR 0x02
-#define DELTA_RI 0x04
-#define DELTA_CD 0x08
-#define _CTS 0x10
-#define _DSR 0x20
-#define _RI 0x40
-#define _CD 0x80
-
-/* prototypes */
-void uart_init( uart_dev_t *u, int bitrate );
-void uart_out( uart_dev_t *u, char c );
-void uart_puts( uart_dev_t *u, char *s );
-char uart_in( uart_dev_t *u );
-void uart_enable_rcvr_int( uart_dev_t *u );
-void uart_disable_rcvr_int( uart_dev_t *u );
-
-#ifdef DUART16552_1_VADDR
-/* DUART present. */
-#define DUART_1_BASE (*(uart_dev_t*)DUART16552_1_VADDR)
-#define DUART_2_BASE (*(uart_dev_t*)DUART16552_2_VADDR)
-#define UART1_PUTS(s) uart_puts( &DUART_1_BASE, s )
-#define UART2_PUTS(s) uart_puts( &DUART_2_BASE, s )
-#else
-/* DUART not configured, use dummy placeholders to allow compiles to work. */
-#define DUART_1_BASE (*(uart_dev_t*)0)
-#define DUART_2_BASE (*(uart_dev_t*)0)
-#define UART1_PUTS(s)
-#define UART2_PUTS(s)
-#endif
-
-/* Compute 16-bit divisor for baudrate generator, with rounding: */
-#define DUART_DIVISOR(crystal,speed) (((crystal)/16 + (speed)/2)/(speed))
-
-#endif /*_uart_h_included_*/
-
+++ /dev/null
-#ifndef _INC_XT2000_H_
-#define _INC_XT2000_H_
-
-/*
- * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
- *
- * include/asm-xtensa/xtensa/xt2000.h - Definitions specific to the
- * Tensilica XT2000 Emulation Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002 Tensilica Inc.
- */
-
-
-#include <xtensa/config/core.h>
-#include <xtensa/config/system.h>
-
-
-/*
- * Default assignment of XT2000 devices to external interrupts.
- */
-
-/* Ethernet interrupt: */
-#ifdef XCHAL_EXTINT3_NUM
-#define SONIC83934_INTNUM XCHAL_EXTINT3_NUM
-#define SONIC83934_INTLEVEL XCHAL_EXTINT3_LEVEL
-#define SONIC83934_INTMASK XCHAL_EXTINT3_MASK
-#else
-#define SONIC83934_INTMASK 0
-#endif
-
-/* DUART channel 1 interrupt (P1 - console): */
-#ifdef XCHAL_EXTINT4_NUM
-#define DUART16552_1_INTNUM XCHAL_EXTINT4_NUM
-#define DUART16552_1_INTLEVEL XCHAL_EXTINT4_LEVEL
-#define DUART16552_1_INTMASK XCHAL_EXTINT4_MASK
-#else
-#define DUART16552_1_INTMASK 0
-#endif
-
-/* DUART channel 2 interrupt (P2 - 2nd serial port): */
-#ifdef XCHAL_EXTINT5_NUM
-#define DUART16552_2_INTNUM XCHAL_EXTINT5_NUM
-#define DUART16552_2_INTLEVEL XCHAL_EXTINT5_LEVEL
-#define DUART16552_2_INTMASK XCHAL_EXTINT5_MASK
-#else
-#define DUART16552_2_INTMASK 0
-#endif
-
-/* FPGA-combined PCI/etc interrupts: */
-#ifdef XCHAL_EXTINT6_NUM
-#define XT2000_FPGAPCI_INTNUM XCHAL_EXTINT6_NUM
-#define XT2000_FPGAPCI_INTLEVEL XCHAL_EXTINT6_LEVEL
-#define XT2000_FPGAPCI_INTMASK XCHAL_EXTINT6_MASK
-#else
-#define XT2000_FPGAPCI_INTMASK 0
-#endif
-
-
-
-/*
- * Device addresses.
- *
- * Note: for endianness-independence, use 32-bit loads and stores for all
- * register accesses to Ethernet, DUART and LED devices. Undefined bits
- * may need to be masked out if needed when reading if the actual register
- * size is smaller than 32 bits.
- *
- * Note: XT2000 bus byte lanes are defined in terms of msbyte and lsbyte
- * relative to the processor. So 32-bit registers are accessed consistently
- * from both big and little endian processors. However, this means byte
- * sequences are not consistent between big and little endian processors.
- * This is fine for RAM, and for ROM if ROM is created for a specific
- * processor (and thus has correct byte sequences). However this may be
- * unexpected for Flash, which might contain a file-system that one wants
- * to use for multiple processor configurations (eg. the Flash might contain
- * the Ethernet card's address, endianness-independent application data, etc).
- * That is, byte sequences written in Flash by a core of a given endianness
- * will be byte-swapped when seen by a core of the other endianness.
- * Someone implementing an endianness-independent Flash file system will
- * likely handle this byte-swapping issue in the Flash driver software.
- */
-
-#define DUART16552_XTAL_FREQ 18432000 /* crystal frequency in Hz */
-#define XTBOARD_FLASH_MAXSIZE 0x4000000 /* 64 MB (max; depends on what is socketed!) */
-#define XTBOARD_EPROM_MAXSIZE 0x0400000 /* 4 MB (max; depends on what is socketed!) */
-#define XTBOARD_EEPROM_MAXSIZE 0x0080000 /* 512 kB (max; depends on what is socketed!) */
-#define XTBOARD_ASRAM_SIZE 0x0100000 /* 1 MB */
-#define XTBOARD_PCI_MEM_SIZE 0x8000000 /* 128 MB (allocated) */
-#define XTBOARD_PCI_IO_SIZE 0x1000000 /* 16 MB (allocated) */
-
-#ifdef XSHAL_IOBLOCK_BYPASS_PADDR
-/* PCI memory space: */
-# define XTBOARD_PCI_MEM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x0000000)
-/* Socketed Flash (eg. 2 x 16-bit devices): */
-# define XTBOARD_FLASH_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x8000000)
-/* PCI I/O space: */
-# define XTBOARD_PCI_IO_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xC000000)
-/* V3 PCI interface chip register/config space: */
-# define XTBOARD_V3PCI_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD000000)
-/* Bus Interface registers: */
-# define XTBOARD_BUSINT_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD010000)
-/* FPGA registers: */
-# define XT2000_FPGAREGS_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD020000)
-/* SONIC SN83934 Ethernet controller/transceiver: */
-# define SONIC83934_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD030000)
-/* 8-character bitmapped LED display: */
-# define XTBOARD_LED_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD040000)
-/* National-Semi PC16552D DUART: */
-# define DUART16552_1_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050020) /* channel 1 (P1 - console) */
-# define DUART16552_2_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050000) /* channel 2 (P2) */
-/* Asynchronous Static RAM: */
-# define XTBOARD_ASRAM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD400000)
-/* 8-bit EEPROM: */
-# define XTBOARD_EEPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD600000)
-/* 2 x 16-bit EPROMs: */
-# define XTBOARD_EPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD800000)
-#endif /* XSHAL_IOBLOCK_BYPASS_PADDR */
-
-/* These devices might be accessed cached: */
-#ifdef XSHAL_IOBLOCK_CACHED_PADDR
-# define XTBOARD_PCI_MEM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x0000000)
-# define XTBOARD_FLASH_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x8000000)
-# define XTBOARD_ASRAM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD400000)
-# define XTBOARD_EEPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD600000)
-# define XTBOARD_EPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD800000)
-#endif /* XSHAL_IOBLOCK_CACHED_PADDR */
-
-
-/*** Same thing over again, this time with virtual addresses: ***/
-
-#ifdef XSHAL_IOBLOCK_BYPASS_VADDR
-/* PCI memory space: */
-# define XTBOARD_PCI_MEM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x0000000)
-/* Socketed Flash (eg. 2 x 16-bit devices): */
-# define XTBOARD_FLASH_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x8000000)
-/* PCI I/O space: */
-# define XTBOARD_PCI_IO_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xC000000)
-/* V3 PCI interface chip register/config space: */
-# define XTBOARD_V3PCI_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD000000)
-/* Bus Interface registers: */
-# define XTBOARD_BUSINT_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD010000)
-/* FPGA registers: */
-# define XT2000_FPGAREGS_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD020000)
-/* SONIC SN83934 Ethernet controller/transceiver: */
-# define SONIC83934_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD030000)
-/* 8-character bitmapped LED display: */
-# define XTBOARD_LED_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD040000)
-/* National-Semi PC16552D DUART: */
-# define DUART16552_1_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050020) /* channel 1 (P1 - console) */
-# define DUART16552_2_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050000) /* channel 2 (P2) */
-/* Asynchronous Static RAM: */
-# define XTBOARD_ASRAM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD400000)
-/* 8-bit EEPROM: */
-# define XTBOARD_EEPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD600000)
-/* 2 x 16-bit EPROMs: */
-# define XTBOARD_EPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD800000)
-#endif /* XSHAL_IOBLOCK_BYPASS_VADDR */
-
-/* These devices might be accessed cached: */
-#ifdef XSHAL_IOBLOCK_CACHED_VADDR
-# define XTBOARD_PCI_MEM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x0000000)
-# define XTBOARD_FLASH_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x8000000)
-# define XTBOARD_ASRAM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD400000)
-# define XTBOARD_EEPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD600000)
-# define XTBOARD_EPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD800000)
-#endif /* XSHAL_IOBLOCK_CACHED_VADDR */
-
-
-/* System ROM: */
-#define XTBOARD_ROM_SIZE XSHAL_ROM_SIZE
-#ifdef XSHAL_ROM_VADDR
-#define XTBOARD_ROM_VADDR XSHAL_ROM_VADDR
-#endif
-#ifdef XSHAL_ROM_PADDR
-#define XTBOARD_ROM_PADDR XSHAL_ROM_PADDR
-#endif
-
-/* System RAM: */
-#define XTBOARD_RAM_SIZE XSHAL_RAM_SIZE
-#ifdef XSHAL_RAM_VADDR
-#define XTBOARD_RAM_VADDR XSHAL_RAM_VADDR
-#endif
-#ifdef XSHAL_RAM_PADDR
-#define XTBOARD_RAM_PADDR XSHAL_RAM_PADDR
-#endif
-#define XTBOARD_RAM_BYPASS_VADDR XSHAL_RAM_BYPASS_VADDR
-#define XTBOARD_RAM_BYPASS_PADDR XSHAL_RAM_BYPASS_PADDR
-
-
-
-/*
- * Things that depend on device addresses.
- */
-
-
-#define XTBOARD_CACHEATTR_WRITEBACK XSHAL_XT2000_CACHEATTR_WRITEBACK
-#define XTBOARD_CACHEATTR_WRITEALLOC XSHAL_XT2000_CACHEATTR_WRITEALLOC
-#define XTBOARD_CACHEATTR_WRITETHRU XSHAL_XT2000_CACHEATTR_WRITETHRU
-#define XTBOARD_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS
-#define XTBOARD_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT
-
-#define XTBOARD_BUSINT_PIPE_REGIONS XSHAL_XT2000_PIPE_REGIONS
-#define XTBOARD_BUSINT_SDRAM_REGIONS XSHAL_XT2000_SDRAM_REGIONS
-
-
-
-/*
- * BusLogic (FPGA) registers.
- * All these registers are normally accessed using 32-bit loads/stores.
- */
-
-/* Register offsets: */
-#define XT2000_DATECD_OFS 0x00 /* date code (read-only) */
-#define XT2000_STSREG_OFS 0x04 /* status (read-only) */
-#define XT2000_SYSLED_OFS 0x08 /* system LED */
-#define XT2000_WRPROT_OFS 0x0C /* write protect */
-#define XT2000_SWRST_OFS 0x10 /* software reset */
-#define XT2000_SYSRST_OFS 0x14 /* system (peripherals) reset */
-#define XT2000_IMASK_OFS 0x18 /* interrupt mask */
-#define XT2000_ISTAT_OFS 0x1C /* interrupt status */
-#define XT2000_V3CFG_OFS 0x20 /* V3 config (V320 PCI) */
-
-/* Physical register addresses: */
-#ifdef XT2000_FPGAREGS_PADDR
-#define XT2000_DATECD_PADDR (XT2000_FPGAREGS_PADDR+XT2000_DATECD_OFS)
-#define XT2000_STSREG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_STSREG_OFS)
-#define XT2000_SYSLED_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSLED_OFS)
-#define XT2000_WRPROT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_WRPROT_OFS)
-#define XT2000_SWRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SWRST_OFS)
-#define XT2000_SYSRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSRST_OFS)
-#define XT2000_IMASK_PADDR (XT2000_FPGAREGS_PADDR+XT2000_IMASK_OFS)
-#define XT2000_ISTAT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_ISTAT_OFS)
-#define XT2000_V3CFG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_V3CFG_OFS)
-#endif
-
-/* Virtual register addresses: */
-#ifdef XT2000_FPGAREGS_VADDR
-#define XT2000_DATECD_VADDR (XT2000_FPGAREGS_VADDR+XT2000_DATECD_OFS)
-#define XT2000_STSREG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_STSREG_OFS)
-#define XT2000_SYSLED_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSLED_OFS)
-#define XT2000_WRPROT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_WRPROT_OFS)
-#define XT2000_SWRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SWRST_OFS)
-#define XT2000_SYSRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSRST_OFS)
-#define XT2000_IMASK_VADDR (XT2000_FPGAREGS_VADDR+XT2000_IMASK_OFS)
-#define XT2000_ISTAT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_ISTAT_OFS)
-#define XT2000_V3CFG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_V3CFG_OFS)
-/* Register access (for C code): */
-#define XT2000_DATECD_REG (*(volatile unsigned*) XT2000_DATECD_VADDR)
-#define XT2000_STSREG_REG (*(volatile unsigned*) XT2000_STSREG_VADDR)
-#define XT2000_SYSLED_REG (*(volatile unsigned*) XT2000_SYSLED_VADDR)
-#define XT2000_WRPROT_REG (*(volatile unsigned*) XT2000_WRPROT_VADDR)
-#define XT2000_SWRST_REG (*(volatile unsigned*) XT2000_SWRST_VADDR)
-#define XT2000_SYSRST_REG (*(volatile unsigned*) XT2000_SYSRST_VADDR)
-#define XT2000_IMASK_REG (*(volatile unsigned*) XT2000_IMASK_VADDR)
-#define XT2000_ISTAT_REG (*(volatile unsigned*) XT2000_ISTAT_VADDR)
-#define XT2000_V3CFG_REG (*(volatile unsigned*) XT2000_V3CFG_VADDR)
-#endif
-
-/* DATECD (date code) bit fields: */
-
-/* BCD-coded month (01..12): */
-#define XT2000_DATECD_MONTH_SHIFT 24
-#define XT2000_DATECD_MONTH_BITS 8
-#define XT2000_DATECD_MONTH_MASK 0xFF000000
-/* BCD-coded day (01..31): */
-#define XT2000_DATECD_DAY_SHIFT 16
-#define XT2000_DATECD_DAY_BITS 8
-#define XT2000_DATECD_DAY_MASK 0x00FF0000
-/* BCD-coded year (2001..9999): */
-#define XT2000_DATECD_YEAR_SHIFT 0
-#define XT2000_DATECD_YEAR_BITS 16
-#define XT2000_DATECD_YEAR_MASK 0x0000FFFF
-
-/* STSREG (status) bit fields: */
-
-/* Switch SW3 setting bit fields (0=off/up, 1=on/down): */
-#define XT2000_STSREG_SW3_SHIFT 0
-#define XT2000_STSREG_SW3_BITS 4
-#define XT2000_STSREG_SW3_MASK 0x0000000F
-/* Boot-select bits of switch SW3: */
-#define XT2000_STSREG_BOOTSEL_SHIFT 0
-#define XT2000_STSREG_BOOTSEL_BITS 2
-#define XT2000_STSREG_BOOTSEL_MASK 0x00000003
-/* Boot-select values: */
-#define XT2000_STSREG_BOOTSEL_FLASH 0
-#define XT2000_STSREG_BOOTSEL_EPROM16 1
-#define XT2000_STSREG_BOOTSEL_PROM8 2
-#define XT2000_STSREG_BOOTSEL_ASRAM 3
-/* User-defined bits of switch SW3: */
-#define XT2000_STSREG_SW3_2_SHIFT 2
-#define XT2000_STSREG_SW3_2_MASK 0x00000004
-#define XT2000_STSREG_SW3_3_SHIFT 3
-#define XT2000_STSREG_SW3_3_MASK 0x00000008
-
-/* SYSLED (system LED) bit fields: */
-
-/* LED control bit (0=off, 1=on): */
-#define XT2000_SYSLED_LEDON_SHIFT 0
-#define XT2000_SYSLED_LEDON_MASK 0x00000001
-
-/* WRPROT (write protect) bit fields (0=writable, 1=write-protected [default]): */
-
-/* Flash write protect: */
-#define XT2000_WRPROT_FLWP_SHIFT 0
-#define XT2000_WRPROT_FLWP_MASK 0x00000001
-/* Reserved but present write protect bits: */
-#define XT2000_WRPROT_WRP_SHIFT 1
-#define XT2000_WRPROT_WRP_BITS 7
-#define XT2000_WRPROT_WRP_MASK 0x000000FE
-
-/* SWRST (software reset; allows s/w to generate power-on equivalent reset): */
-
-/* Software reset bits: */
-#define XT2000_SWRST_SWR_SHIFT 0
-#define XT2000_SWRST_SWR_BITS 16
-#define XT2000_SWRST_SWR_MASK 0x0000FFFF
-/* Software reset value -- writing this value resets the board: */
-#define XT2000_SWRST_RESETVALUE 0x0000DEAD
-
-/* SYSRST (system reset; controls reset of individual peripherals): */
-
-/* All-device reset: */
-#define XT2000_SYSRST_ALL_SHIFT 0
-#define XT2000_SYSRST_ALL_BITS 4
-#define XT2000_SYSRST_ALL_MASK 0x0000000F
-/* HDSP-2534 LED display reset (1=reset, 0=nothing): */
-#define XT2000_SYSRST_LED_SHIFT 0
-#define XT2000_SYSRST_LED_MASK 0x00000001
-/* Sonic DP83934 Ethernet controller reset (1=reset, 0=nothing): */
-#define XT2000_SYSRST_SONIC_SHIFT 1
-#define XT2000_SYSRST_SONIC_MASK 0x00000002
-/* DP16552 DUART reset (1=reset, 0=nothing): */
-#define XT2000_SYSRST_DUART_SHIFT 2
-#define XT2000_SYSRST_DUART_MASK 0x00000004
-/* V3 V320 PCI bridge controller reset (1=reset, 0=nothing): */
-#define XT2000_SYSRST_V3_SHIFT 3
-#define XT2000_SYSRST_V3_MASK 0x00000008
-
-/* IMASK (interrupt mask; 0=disable, 1=enable): */
-/* ISTAT (interrupt status; 0=inactive, 1=pending): */
-
-/* PCI INTP interrupt: */
-#define XT2000_INTMUX_PCI_INTP_SHIFT 2
-#define XT2000_INTMUX_PCI_INTP_MASK 0x00000004
-/* PCI INTS interrupt: */
-#define XT2000_INTMUX_PCI_INTS_SHIFT 3
-#define XT2000_INTMUX_PCI_INTS_MASK 0x00000008
-/* PCI INTD interrupt: */
-#define XT2000_INTMUX_PCI_INTD_SHIFT 4
-#define XT2000_INTMUX_PCI_INTD_MASK 0x00000010
-/* V320 PCI controller interrupt: */
-#define XT2000_INTMUX_V3_SHIFT 5
-#define XT2000_INTMUX_V3_MASK 0x00000020
-/* PCI ENUM interrupt: */
-#define XT2000_INTMUX_PCI_ENUM_SHIFT 6
-#define XT2000_INTMUX_PCI_ENUM_MASK 0x00000040
-/* PCI DEG interrupt: */
-#define XT2000_INTMUX_PCI_DEG_SHIFT 7
-#define XT2000_INTMUX_PCI_DEG_MASK 0x00000080
-
-/* V3CFG (V3 config, V320 PCI controller): */
-
-/* V3 address control (0=pass-thru, 1=V3 address bits 31:28 set to 4'b0001 [default]): */
-#define XT2000_V3CFG_V3ADC_SHIFT 0
-#define XT2000_V3CFG_V3ADC_MASK 0x00000001
-
-/* I2C Devices */
-
-#define XT2000_I2C_RTC_ID 0x68
-#define XT2000_I2C_NVRAM0_ID 0x56 /* 1st 256 byte block */
-#define XT2000_I2C_NVRAM1_ID 0x57 /* 2nd 256 byte block */
-
-/* NVRAM Board Info structure: */
-
-#define XT2000_NVRAM_SIZE 512
-
-#define XT2000_NVRAM_BINFO_START 0x100
-#define XT2000_NVRAM_BINFO_SIZE 0x20
-#define XT2000_NVRAM_BINFO_VERSION 0x10 /* version 1.0 */
-#if 0
-#define XT2000_NVRAM_BINFO_VERSION_OFFSET 0x00
-#define XT2000_NVRAM_BINFO_VERSION_SIZE 0x1
-#define XT2000_NVRAM_BINFO_ETH_ADDR_OFFSET 0x02
-#define XT2000_NVRAM_BINFO_ETH_ADDR_SIZE 0x6
-#define XT2000_NVRAM_BINFO_SN_OFFSET 0x10
-#define XT2000_NVRAM_BINFO_SN_SIZE 0xE
-#define XT2000_NVRAM_BINFO_CRC_OFFSET 0x1E
-#define XT2000_NVRAM_BINFO_CRC_SIZE 0x2
-#endif /*0*/
-
-#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE)
-typedef struct xt2000_nvram_binfo {
- unsigned char version;
- unsigned char reserved1;
- unsigned char eth_addr[6];
- unsigned char reserved8[8];
- unsigned char serialno[14];
- unsigned char crc[2]; /* 16-bit CRC */
-} xt2000_nvram_binfo;
-#endif /*!__ASSEMBLY__ && !_NOCLANGUAGE*/
-
-
-#endif /*_INC_XT2000_H_*/
-
+++ /dev/null
-#ifndef _xtboard_h_included_
-#define _xtboard_h_included_
-
-/*
- * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND
- *
- * xtboard.h -- Routines for getting useful information from the board.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002 Tensilica Inc.
- */
-
-
-#include <xtensa/xt2000.h>
-
-#define XTBOARD_RTC_ERROR -1
-#define XTBOARD_RTC_STOPPED -2
-
-
-/* xt2000-i2cdev.c: */
-typedef void XtboardDelayFunc( unsigned );
-extern XtboardDelayFunc* xtboard_set_nsdelay_func( XtboardDelayFunc *delay_fn );
-extern int xtboard_i2c_read (unsigned id, unsigned char *buf, unsigned addr, unsigned size);
-extern int xtboard_i2c_write(unsigned id, unsigned char *buf, unsigned addr, unsigned size);
-extern int xtboard_i2c_wait_nvram_ack(unsigned id, unsigned swtimer);
-
-/* xtboard.c: */
-extern int xtboard_nvram_read (unsigned addr, unsigned len, unsigned char *buf);
-extern int xtboard_nvram_write(unsigned addr, unsigned len, unsigned char *buf);
-extern int xtboard_nvram_binfo_read (xt2000_nvram_binfo *buf);
-extern int xtboard_nvram_binfo_write(xt2000_nvram_binfo *buf);
-extern int xtboard_nvram_binfo_valid(xt2000_nvram_binfo *buf);
-extern int xtboard_ethermac_get(unsigned char *buf);
-extern int xtboard_ethermac_set(unsigned char *buf);
-
-/*+*----------------------------------------------------------------------------
-/ Function: xtboard_get_rtc_time
-/
-/ Description: Get time stored in real-time clock.
-/
-/ Returns: time in seconds stored in real-time clock.
-/-**----------------------------------------------------------------------------*/
-
-extern unsigned xtboard_get_rtc_time(void);
-
-/*+*----------------------------------------------------------------------------
-/ Function: xtboard_set_rtc_time
-/
-/ Description: Set time stored in real-time clock.
-/
-/ Parameters: time -- time in seconds to store to real-time clock
-/
-/ Returns: 0 on success, xtboard_i2c_write() error code otherwise.
-/-**----------------------------------------------------------------------------*/
-
-extern int xtboard_set_rtc_time(unsigned time);
-
-
-/* xtfreq.c: */
-/*+*----------------------------------------------------------------------------
-/ Function: xtboard_measure_sys_clk
-/
-/ Description: Get frequency of system clock.
-/
-/ Parameters: none
-/
-/ Returns: frequency of system clock.
-/-**----------------------------------------------------------------------------*/
-
-extern unsigned xtboard_measure_sys_clk(void);
-
-
-#if 0 /* old stuff from xtboard.c: */
-
-/*+*----------------------------------------------------------------------------
-/ Function: xtboard_nvram valid
-/
-/ Description: Determines if data in NVRAM is valid.
-/
-/ Parameters: delay -- 10us delay function
-/
-/ Returns: 1 if NVRAM is valid, 0 otherwise
-/-**----------------------------------------------------------------------------*/
-
-extern unsigned xtboard_nvram_valid(void (*delay)( void ));
-
-/*+*----------------------------------------------------------------------------
-/ Function: xtboard_get_nvram_contents
-/
-/ Description: Returns contents of NVRAM.
-/
-/ Parameters: buf -- buffer to NVRAM contents.
-/ delay -- 10us delay function
-/
-/ Returns: 1 if NVRAM is valid, 0 otherwise
-/-**----------------------------------------------------------------------------*/
-
-extern unsigned xtboard_get_nvram_contents(unsigned char *buf, void (*delay)( void ));
-
-/*+*----------------------------------------------------------------------------
-/ Function: xtboard_get_ether_addr
-/
-/ Description: Returns ethernet address of board.
-/
-/ Parameters: buf -- buffer to store ethernet address
-/ delay -- 10us delay function
-/
-/ Returns: nothing.
-/-**----------------------------------------------------------------------------*/
-
-extern void xtboard_get_ether_addr(unsigned char *buf, void (*delay)( void ));
-
-#endif /*0*/
-
-
-#endif /*_xtboard_h_included_*/
-
header-y += fdreg.h
header-y += fib_rules.h
header-y += fuse.h
-header-y += futex.h
header-y += genetlink.h
header-y += gen_stats.h
header-y += gigaset_dev.h
unifdef-y += fcntl.h
unifdef-y += filter.h
unifdef-y += flat.h
+unifdef-y += futex.h
unifdef-y += fs.h
unifdef-y += gameport.h
unifdef-y += generic_serial.h
wait_queue_t ki_wait;
loff_t ki_pos;
+ atomic_t ki_bio_count; /* num bio used for this iocb */
void *private;
/* State that we remember to be able to restart/retry */
unsigned short ki_opcode;
};
extern struct backlight_device *backlight_device_register(const char *name,
- void *devdata, struct backlight_properties *bp);
+ struct device *dev,void *devdata,struct backlight_properties *bp);
extern void backlight_device_unregister(struct backlight_device *bd);
#define to_backlight_device(obj) container_of(obj, struct backlight_device, class_dev)
gfp_t);
extern void bio_set_pages_dirty(struct bio *bio);
extern void bio_check_pages_dirty(struct bio *bio);
+extern void bio_release_pages(struct bio *bio);
extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int);
extern int bio_uncopy_user(struct bio *);
void zero_fill_bio(struct bio *bio);
--- /dev/null
+#ifndef _LINUX_BITREV_H
+#define _LINUX_BITREV_H
+
+#include <linux/types.h>
+
+extern u8 const byte_rev_table[256];
+
+static inline u8 bitrev8(u8 byte)
+{
+ return byte_rev_table[byte];
+}
+
+extern u32 bitrev32(u32 in);
+
+#endif /* _LINUX_BITREV_H */
struct bio_vec;
typedef int (merge_bvec_fn) (request_queue_t *, struct bio *, struct bio_vec *);
-typedef void (activity_fn) (void *data, int rw);
typedef int (issue_flush_fn) (request_queue_t *, struct gendisk *, sector_t *);
typedef void (prepare_flush_fn) (request_queue_t *, struct request *);
typedef void (softirq_done_fn)(struct request *);
prep_rq_fn *prep_rq_fn;
unplug_fn *unplug_fn;
merge_bvec_fn *merge_bvec_fn;
- activity_fn *activity_fn;
issue_flush_fn *issue_flush_fn;
prepare_flush_fn *prepare_flush_fn;
softirq_done_fn *softirq_done_fn;
*/
void *queuedata;
- void *activity_data;
-
/*
* queue needs bounce pages for pages above this limit
*/
extern void __blk_stop_queue(request_queue_t *q);
extern void blk_run_queue(request_queue_t *);
extern void blk_start_queueing(request_queue_t *);
-extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *);
extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned long);
extern int blk_rq_unmap_user(struct request *);
extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, gfp_t);
--- /dev/null
+#ifndef _LINUX_BUG_H
+#define _LINUX_BUG_H
+
+#include <linux/module.h>
+#include <asm/bug.h>
+
+enum bug_trap_type {
+ BUG_TRAP_TYPE_NONE = 0,
+ BUG_TRAP_TYPE_WARN = 1,
+ BUG_TRAP_TYPE_BUG = 2,
+};
+
+#ifdef CONFIG_GENERIC_BUG
+#include <asm-generic/bug.h>
+
+static inline int is_warning_bug(const struct bug_entry *bug)
+{
+ return bug->flags & BUGFLAG_WARNING;
+}
+
+const struct bug_entry *find_bug(unsigned long bugaddr);
+
+enum bug_trap_type report_bug(unsigned long bug_addr);
+
+int module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+ struct module *);
+void module_bug_cleanup(struct module *);
+
+/* These are defined by the architecture */
+int is_valid_bugaddr(unsigned long addr);
+
+#else /* !CONFIG_GENERIC_BUG */
+
+static inline enum bug_trap_type report_bug(unsigned long bug_addr)
+{
+ return BUG_TRAP_TYPE_BUG;
+}
+static inline int module_bug_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *mod)
+{
+ return 0;
+}
+static inline void module_bug_cleanup(struct module *mod) {}
+
+#endif /* CONFIG_GENERIC_BUG */
+#endif /* _LINUX_BUG_H */
* Unless you're the timekeeping code, you should not be using this!
*/
static inline void clocksource_calculate_interval(struct clocksource *c,
- unsigned long length_nsec)
+ unsigned long length_nsec)
{
u64 tmp;
#define CODA_ALLOC(ptr, cast, size) do { \
if (size < PAGE_SIZE) \
- ptr = (cast)kmalloc((unsigned long) size, GFP_KERNEL); \
+ ptr = kmalloc((unsigned long) size, GFP_KERNEL); \
else \
ptr = (cast)vmalloc((unsigned long) size); \
if (!ptr) \
#error no compiler-gcc.h file for this gcc version
#elif __GNUC__ == 4
# include <linux/compiler-gcc4.h>
-#elif __GNUC__ == 3
+#elif __GNUC__ == 3 && __GNUC_MINOR__ >= 2
# include <linux/compiler-gcc3.h>
#else
# error Sorry, your compiler is too old/not recognized.
void (*drop_item)(struct config_group *group, struct config_item *item);
};
-
-
-/**
- * Use these macros to make defining attributes easier. See include/linux/device.h
- * for examples..
- */
-
-#if 0
-#define __ATTR(_name,_mode,_show,_store) { \
- .attr = {.ca_name = __stringify(_name), .ca_mode = _mode, .ca_owner = THIS_MODULE }, \
- .show = _show, \
- .store = _store, \
-}
-
-#define __ATTR_RO(_name) { \
- .attr = { .ca_name = __stringify(_name), .ca_mode = 0444, .ca_owner = THIS_MODULE }, \
- .show = _name##_show, \
-}
-
-#define __ATTR_NULL { .attr = { .name = NULL } }
-
-#define attr_name(_attr) (_attr).attr.name
-#endif
-
-
struct configfs_subsystem {
struct config_group su_group;
struct semaphore su_sem;
unsigned int relation);
+extern int cpufreq_driver_getavg(struct cpufreq_policy *policy);
+
int cpufreq_register_governor(struct cpufreq_governor *governor);
void cpufreq_unregister_governor(struct cpufreq_governor *governor);
unsigned int (*get) (unsigned int cpu);
/* optional */
+ unsigned int (*getavg) (unsigned int cpu);
int (*exit) (struct cpufreq_policy *policy);
int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg);
int (*resume) (struct cpufreq_policy *policy);
nodes_subset((nodes), current->mems_allowed)
int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl);
-extern int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask);
-static int inline cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
+extern int __cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask);
+extern int __cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask);
+
+static int inline cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask)
+{
+ return number_of_cpusets <= 1 ||
+ __cpuset_zone_allowed_softwall(z, gfp_mask);
+}
+
+static int inline cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask)
{
- return number_of_cpusets <= 1 || __cpuset_zone_allowed(z, gfp_mask);
+ return number_of_cpusets <= 1 ||
+ __cpuset_zone_allowed_hardwall(z, gfp_mask);
}
extern int cpuset_excl_nodes_overlap(const struct task_struct *p);
return 1;
}
-static inline int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
+static inline int cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask)
+{
+ return 1;
+}
+
+static inline int cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask)
{
return 1;
}
#define _LINUX_CRC32_H
#include <linux/types.h>
+#include <linux/bitrev.h>
extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len);
extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len);
-extern u32 bitreverse(u32 in);
#define crc32(seed, data, length) crc32_le(seed, (unsigned char const *)data, length)
* is in bit nr 0], thus it must be reversed before use. Except for
* nics that bit swap the result internally...
*/
-#define ether_crc(length, data) bitreverse(crc32_le(~0, data, length))
+#define ether_crc(length, data) bitrev32(crc32_le(~0, data, length))
#define ether_crc_le(length, data) crc32_le(~0, data, length)
#endif /* _LINUX_CRC32_H */
};
/* DCCP features (RFC 4340 section 6.4) */
- enum {
- DCCPF_RESERVED = 0,
- DCCPF_CCID = 1,
+enum {
+ DCCPF_RESERVED = 0,
+ DCCPF_CCID = 1,
DCCPF_SHORT_SEQNOS = 2, /* XXX: not yet implemented */
- DCCPF_SEQUENCE_WINDOW = 3,
+ DCCPF_SEQUENCE_WINDOW = 3,
DCCPF_ECN_INCAPABLE = 4, /* XXX: not yet implemented */
- DCCPF_ACK_RATIO = 5,
- DCCPF_SEND_ACK_VECTOR = 6,
- DCCPF_SEND_NDP_COUNT = 7,
+ DCCPF_ACK_RATIO = 5,
+ DCCPF_SEND_ACK_VECTOR = 6,
+ DCCPF_SEND_NDP_COUNT = 7,
DCCPF_MIN_CSUM_COVER = 8,
DCCPF_DATA_CHECKSUM = 9, /* XXX: not yet implemented */
- /* 10-127 reserved */
- DCCPF_MIN_CCID_SPECIFIC = 128,
- DCCPF_MAX_CCID_SPECIFIC = 255,
+ /* 10-127 reserved */
+ DCCPF_MIN_CCID_SPECIFIC = 128,
+ DCCPF_MAX_CCID_SPECIFIC = 255,
};
/* this structure is argument to DCCP_SOCKOPT_CHANGE_X */
};
#define DCCP_SERVICE_INVALID_VALUE htonl((__u32)-1)
-#define DCCP_SERVICE_CODE_IS_ABSENT 0
+#define DCCP_SERVICE_CODE_IS_ABSENT 0
static inline int dccp_list_has_service(const struct dccp_service_list *sl,
const __be32 service)
u32 i = sl->dccpsl_nr;
while (i--)
if (sl->dccpsl_list[i] == service)
- return 1;
+ return 1;
}
return 0;
}
__u8 dccps_hc_tx_insert_options:1;
struct timer_list dccps_xmit_timer;
};
-
+
static inline struct dccp_sock *dccp_sk(const struct sock *sk)
{
return (struct dccp_sock *)sk;
* The map function must return:
* < 0: error
* = 0: The target will handle the io by resubmitting it later
- * > 0: simple remap complete
+ * = 1: simple remap complete
+ * = 2: The target wants to push back the io
*/
typedef int (*dm_map_fn) (struct dm_target *ti, struct bio *bio,
union map_info *map_context);
* 0 : ended successfully
* 1 : for some reason the io has still not completed (eg,
* multipath target might want to requeue a failed io).
+ * 2 : The target wants to push back the io
*/
typedef int (*dm_endio_fn) (struct dm_target *ti,
struct bio *bio, int error,
/*
* A device can still be used while suspended, but I/O is deferred.
*/
-int dm_suspend(struct mapped_device *md, int with_lockfs);
+int dm_suspend(struct mapped_device *md, unsigned suspend_flags);
int dm_resume(struct mapped_device *md);
/*
const char *dm_device_name(struct mapped_device *md);
struct gendisk *dm_disk(struct mapped_device *md);
int dm_suspended(struct mapped_device *md);
+int dm_noflush_suspending(struct dm_target *ti);
/*
* Geometry functions.
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 10
+#define DM_VERSION_MINOR 11
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2006-09-14)"
+#define DM_VERSION_EXTRA "-ioctl (2006-10-12)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
*/
#define DM_SKIP_LOCKFS_FLAG (1 << 10) /* In */
+/*
+ * Set this to suspend without flushing queued ios.
+ */
+#define DM_NOFLUSH_FLAG (1 << 11) /* In */
+
#endif /* _LINUX_DM_IOCTL_H */
--- /dev/null
+#ifndef _LINUX_FAULT_INJECT_H
+#define _LINUX_FAULT_INJECT_H
+
+#ifdef CONFIG_FAULT_INJECTION
+
+#include <linux/types.h>
+#include <linux/debugfs.h>
+#include <asm/atomic.h>
+
+/*
+ * For explanation of the elements of this struct, see
+ * Documentation/fault-injection/fault-injection.txt
+ */
+struct fault_attr {
+ unsigned long probability;
+ unsigned long interval;
+ atomic_t times;
+ atomic_t space;
+ unsigned long verbose;
+ u32 task_filter;
+ unsigned long stacktrace_depth;
+ unsigned long require_start;
+ unsigned long require_end;
+ unsigned long reject_start;
+ unsigned long reject_end;
+
+ unsigned long count;
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+ struct {
+ struct dentry *dir;
+
+ struct dentry *probability_file;
+ struct dentry *interval_file;
+ struct dentry *times_file;
+ struct dentry *space_file;
+ struct dentry *verbose_file;
+ struct dentry *task_filter_file;
+ struct dentry *stacktrace_depth_file;
+ struct dentry *require_start_file;
+ struct dentry *require_end_file;
+ struct dentry *reject_start_file;
+ struct dentry *reject_end_file;
+ } dentries;
+
+#endif
+};
+
+#define FAULT_ATTR_INITIALIZER { \
+ .interval = 1, \
+ .times = ATOMIC_INIT(1), \
+ .require_end = ULONG_MAX, \
+ .stacktrace_depth = 32, \
+ .verbose = 2, \
+ }
+
+#define DECLARE_FAULT_ATTR(name) struct fault_attr name = FAULT_ATTR_INITIALIZER
+int setup_fault_attr(struct fault_attr *attr, char *str);
+void should_fail_srandom(unsigned long entropy);
+bool should_fail(struct fault_attr *attr, ssize_t size);
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+int init_fault_attr_dentries(struct fault_attr *attr, const char *name);
+void cleanup_fault_attr_dentries(struct fault_attr *attr);
+
+#else /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+static inline int init_fault_attr_dentries(struct fault_attr *attr,
+ const char *name)
+{
+ return -ENODEV;
+}
+
+static inline void cleanup_fault_attr_dentries(struct fault_attr *attr)
+{
+}
+
+#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+#endif /* CONFIG_FAULT_INJECTION */
+
+#endif /* _LINUX_FAULT_INJECT_H */
#define FB_MODE_IS_FIRST 16
#define FB_MODE_IS_FROM_VAR 32
-extern int fbmon_valid_timings(u_int pixclock, u_int htotal, u_int vtotal,
- const struct fb_info *fb_info);
extern int fbmon_dpms(const struct fb_info *fb_info);
extern int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var,
struct fb_info *info);
/* drivers/video/fbcmap.c */
extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
extern void fb_dealloc_cmap(struct fb_cmap *cmap);
-extern int fb_copy_cmap(struct fb_cmap *from, struct fb_cmap *to);
-extern int fb_cmap_to_user(struct fb_cmap *from, struct fb_cmap_user *to);
+extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to);
+extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to);
extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info);
extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info);
-extern struct fb_cmap *fb_default_cmap(int len);
+extern const struct fb_cmap *fb_default_cmap(int len);
extern void fb_invert_cmaps(void);
struct fb_videomode {
unsigned long fds_bits[1];
};
-/*
- * More than this number of fds: we use a separately allocated fd_set
- */
-#define EMBEDDED_FD_SET_SIZE (BITS_PER_BYTE * sizeof(struct embedded_fd_set))
-
struct fdtable {
unsigned int max_fds;
- int max_fdset;
struct file ** fd; /* current fd array */
fd_set *close_on_exec;
fd_set *open_fds;
struct rcu_head rcu;
- struct files_struct *free_files;
struct fdtable *next;
};
extern void FASTCALL(put_unused_fd(unsigned int fd));
struct kmem_cache;
-extern struct file ** alloc_fd_array(int);
-extern void free_fd_array(struct file **, int);
-
-extern fd_set *alloc_fdset(int);
-extern void free_fdset(fd_set *, int);
-
extern int expand_files(struct files_struct *, int nr);
-extern void free_fdtable(struct fdtable *fdt);
+extern void free_fdtable_rcu(struct rcu_head *rcu);
extern void __init files_defer_init(void);
static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd)
/* Freezer declarations */
+#include <linux/sched.h>
+
#ifdef CONFIG_PM
/*
* Check if a process has been frozen
*/
static inline int freezing(struct task_struct *p)
{
- return p->flags & PF_FREEZE;
+ return test_tsk_thread_flag(p, TIF_FREEZE);
}
/*
* Request that a process be frozen
- * FIXME: SMP problem. We may not modify other process' flags!
*/
static inline void freeze(struct task_struct *p)
{
- p->flags |= PF_FREEZE;
+ set_tsk_thread_flag(p, TIF_FREEZE);
}
/*
*/
static inline void do_not_freeze(struct task_struct *p)
{
- p->flags &= ~PF_FREEZE;
+ clear_tsk_thread_flag(p, TIF_FREEZE);
}
/*
*/
static inline void frozen_process(struct task_struct *p)
{
- p->flags = (p->flags & ~PF_FREEZE) | PF_FROZEN;
+ p->flags |= PF_FROZEN;
+ wmb();
+ clear_tsk_thread_flag(p, TIF_FREEZE);
}
extern void refrigerator(void);
#define MS_PRIVATE (1<<18) /* change to private */
#define MS_SLAVE (1<<19) /* change to slave */
#define MS_SHARED (1<<20) /* change to shared */
+#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */
#define MS_ACTIVE (1<<30)
#define MS_NOUSER (1<<31)
#include <linux/types.h>
#include <linux/kdev_t.h>
#include <linux/dcache.h>
+#include <linux/namei.h>
#include <linux/stat.h>
#include <linux/cache.h>
#include <linux/kobject.h>
};
/*
- * bdev->bd_mutex nesting subclasses for the lock validator:
- *
- * 0: normal
- * 1: 'whole'
- * 2: 'partition'
- */
-enum bdev_bd_mutex_lock_class
-{
- BD_MUTEX_NORMAL,
- BD_MUTEX_WHOLE,
- BD_MUTEX_PARTITION
-};
-
-
-/*
* Radix-tree tags, for tagging dirty and writeback pages within the pagecache
* radix trees
*/
struct list_head fu_list;
struct rcu_head fu_rcuhead;
} f_u;
- struct dentry *f_dentry;
- struct vfsmount *f_vfsmnt;
+ struct path f_path;
+#define f_dentry f_path.dentry
+#define f_vfsmnt f_path.mnt
const struct file_operations *f_op;
atomic_t f_count;
unsigned int f_flags;
static inline void file_accessed(struct file *file)
{
if (!(file->f_flags & O_NOATIME))
- touch_atime(file->f_vfsmnt, file->f_dentry);
+ touch_atime(file->f_path.mnt, file->f_path.dentry);
}
int sync_inode(struct inode *inode, struct writeback_control *wbc);
extern void bd_forget(struct inode *inode);
extern void bdput(struct block_device *);
extern struct block_device *open_by_devnum(dev_t, unsigned);
-extern struct block_device *open_partition_by_devnum(dev_t, unsigned);
extern const struct address_space_operations def_blk_aops;
#else
static inline void bd_forget(struct inode *inode) {}
extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long);
extern int blkdev_get(struct block_device *, mode_t, unsigned);
extern int blkdev_put(struct block_device *);
-extern int blkdev_put_partition(struct block_device *);
extern int bd_claim(struct block_device *, void *);
extern void bd_release(struct block_device *);
#ifdef CONFIG_SYSFS
static inline void allow_write_access(struct file *file)
{
if (file)
- atomic_inc(&file->f_dentry->d_inode->i_writecount);
+ atomic_inc(&file->f_path.dentry->d_inode->i_writecount);
}
extern int do_pipe(int *);
extern struct file *create_read_pipe(struct file *f);
--- /dev/null
+#ifndef _LINUX_FS_STACK_H
+#define _LINUX_FS_STACK_H
+
+/* This file defines generic functions used primarily by stackable
+ * filesystems; none of these functions require i_mutex to be held.
+ */
+
+#include <linux/fs.h>
+
+/* externs for fs/stack.c */
+extern void fsstack_copy_attr_all(struct inode *dest, const struct inode *src,
+ int (*get_nlinks)(struct inode *));
+
+extern void fsstack_copy_inode_size(struct inode *dst, const struct inode *src);
+
+/* inlines */
+static inline void fsstack_copy_attr_atime(struct inode *dest,
+ const struct inode *src)
+{
+ dest->i_atime = src->i_atime;
+}
+
+static inline void fsstack_copy_attr_times(struct inode *dest,
+ const struct inode *src)
+{
+ dest->i_atime = src->i_atime;
+ dest->i_mtime = src->i_mtime;
+ dest->i_ctime = src->i_ctime;
+}
+
+#endif /* _LINUX_FS_STACK_H */
#define _FSL_DEVICE_H_
#include <linux/types.h>
+#include <linux/phy.h>
/*
* Some conventions on how we handle peripherals on Freescale chips
*/
static inline void fsnotify_close(struct file *file)
{
- struct dentry *dentry = file->f_dentry;
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
const char *name = dentry->d_name.name;
mode_t mode = file->f_mode;
*/
#define ROBUST_LIST_LIMIT 2048
+#ifdef __KERNEL__
long do_futex(u32 __user *uaddr, int op, u32 val, unsigned long timeout,
u32 __user *uaddr2, u32 val2, u32 val3);
{
}
#endif
+#endif /* __KERNEL__ */
#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */
#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */
static inline struct gameport *gameport_allocate_port(void)
{
- struct gameport *gameport = kcalloc(1, sizeof(struct gameport), GFP_KERNEL);
+ struct gameport *gameport = kzalloc(sizeof(struct gameport), GFP_KERNEL);
return gameport;
}
int gs_block_til_ready(void *port, struct file *filp);
void gs_close(struct tty_struct *tty, struct file *filp);
void gs_set_termios (struct tty_struct * tty,
- struct termios * old_termios);
+ struct ktermios * old_termios);
int gs_init_port(struct gs_port *port);
int gs_setserial(struct gs_port *port, struct serial_struct __user *sp);
int gs_getserial(struct gs_port *port, struct serial_struct __user *sp);
struct kobject *holder_dir;
unsigned ios[2], sectors[2]; /* READs and WRITEs */
int policy, partno;
+#ifdef CONFIG_FAIL_MAKE_REQUEST
+ int make_it_fail;
+#endif
};
#define GENHD_FL_REMOVABLE 1
#define GENHD_FL_CD 8
#define GENHD_FL_UP 16
#define GENHD_FL_SUPPRESS_PARTITION_INFO 32
+#define GENHD_FL_FAIL 64
struct disk_stats {
unsigned long sectors[2]; /* READs and WRITEs */
*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2001 Vojtech Pavlik
+ * Copyright (c) 2006 Jiri Kosina
*/
/*
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
+#include <linux/input.h>
/*
* USB HID (Human Interface Device) interface class code
#define HID_QUIRK_POWERBOOK_HAS_FN 0x00001000
#define HID_QUIRK_POWERBOOK_FN_ON 0x00002000
#define HID_QUIRK_INVERT_HWHEEL 0x00004000
-#define HID_QUIRK_POWERBOOK_ISO_KEYBOARD 0x00008000
+#define HID_QUIRK_POWERBOOK_ISO_KEYBOARD 0x00008000
+#define HID_QUIRK_BAD_RELATIVE_KEYS 0x00010000
/*
* This is the global environment of the parser. This information is
unsigned collection_size; /* Number of allocated hid_collections */
unsigned maxcollection; /* Number of parsed collections */
unsigned maxapplication; /* Number of applications */
+ unsigned short bus; /* BUS ID */
+ unsigned short vendor; /* Vendor ID */
+ unsigned short product; /* Product ID */
unsigned version; /* HID version */
unsigned country; /* HID country */
struct hid_report_enum report_enum[HID_REPORT_TYPES];
- struct usb_device *dev; /* USB device */
- struct usb_interface *intf; /* USB interface */
- int ifnum; /* USB interface number */
-
- unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
- struct timer_list io_retry; /* Retry timer */
- unsigned long stop_retry; /* Time to give up, in jiffies */
- unsigned int retry_delay; /* Delay length in ms */
- struct work_struct reset_work; /* Task context for resets */
-
- unsigned int bufsize; /* URB buffer size */
-
- struct urb *urbin; /* Input URB */
- char *inbuf; /* Input buffer */
- dma_addr_t inbuf_dma; /* Input buffer dma */
- spinlock_t inlock; /* Input fifo spinlock */
-
- struct urb *urbctrl; /* Control URB */
- struct usb_ctrlrequest *cr; /* Control request struct */
- dma_addr_t cr_dma; /* Control request struct dma */
- struct hid_control_fifo ctrl[HID_CONTROL_FIFO_SIZE]; /* Control fifo */
- unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */
- char *ctrlbuf; /* Control buffer */
- dma_addr_t ctrlbuf_dma; /* Control buffer dma */
- spinlock_t ctrllock; /* Control fifo spinlock */
-
- struct urb *urbout; /* Output URB */
- struct hid_report *out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */
- unsigned char outhead, outtail; /* Output pipe fifo head & tail */
- char *outbuf; /* Output buffer */
- dma_addr_t outbuf_dma; /* Output buffer dma */
- spinlock_t outlock; /* Output fifo spinlock */
+ struct device *dev; /* device */
unsigned claimed; /* Claimed by hidinput, hiddev? */
unsigned quirks; /* Various quirks the device can pull on us */
char phys[64]; /* Device physical location */
char uniq[64]; /* Device unique identifier (serial #) */
+ void *driver_data;
+
+ /* device-specific function pointers */
+ int (*hidinput_input_event) (struct input_dev *, unsigned int, unsigned int, int);
+ int (*hidinput_open) (struct input_dev *);
+ void (*hidinput_close) (struct input_dev *);
+
+ /* hiddev event handler */
+ void (*hiddev_hid_event) (struct hid_device *, struct hid_field *field,
+ struct hid_usage *, __s32);
+ void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
#ifdef CONFIG_USB_HIDINPUT_POWERBOOK
+ unsigned int pb_fnmode;
unsigned long pb_pressed_fn[NBITS(KEY_MAX)];
unsigned long pb_pressed_numlock[NBITS(KEY_MAX)];
#endif
#define resolv_event(a,b) do { } while (0)
#endif
-#endif
-
-#ifdef CONFIG_USB_HIDINPUT
/* Applications from HID Usage Tables 4/8/99 Version 1.1 */
/* We ignore a few input applications that are not widely used */
#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001))
+
+/* HID core API */
extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32);
extern void hidinput_report_event(struct hid_device *hid, struct hid_report *report);
extern int hidinput_connect(struct hid_device *);
extern void hidinput_disconnect(struct hid_device *);
-#else
-#define IS_INPUT_APPLICATION(a) (0)
-static inline void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value) { }
-static inline void hidinput_report_event(struct hid_device *hid, struct hid_report *report) { }
-static inline int hidinput_connect(struct hid_device *hid) { return -ENODEV; }
-static inline void hidinput_disconnect(struct hid_device *hid) { }
-#endif
-int hid_open(struct hid_device *);
-void hid_close(struct hid_device *);
int hid_set_field(struct hid_field *, unsigned, __s32);
-void hid_submit_report(struct hid_device *, struct hid_report *, unsigned char dir);
-void hid_init_reports(struct hid_device *hid);
-int hid_wait_io(struct hid_device* hid);
-
+int hid_input_report(struct hid_device *, int type, u8 *, int, int);
+int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
+void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt);
+void hid_output_report(struct hid_report *report, __u8 *data);
+void hid_free_device(struct hid_device *device);
+struct hid_device *hid_parse_report(__u8 *start, unsigned size);
#ifdef CONFIG_HID_FF
int hid_ff_init(struct hid_device *hid);
#else
static inline int hid_ff_init(struct hid_device *hid) { return -1; }
#endif
+#ifdef DEBUG
+#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , \
+ __FILE__ , ## arg)
+#else
+#define dbg(format, arg...) do {} while (0)
+#endif
+
+#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , \
+ __FILE__ , ## arg)
+#endif
kunmap_atomic(kaddr, KM_USER0);
}
-static inline void copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr)
+#ifndef __HAVE_ARCH_COPY_USER_HIGHPAGE
+
+static inline void copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr, struct vm_area_struct *vma)
{
char *vfrom, *vto;
smp_wmb();
}
+#endif
+
static inline void copy_highpage(struct page *to, struct page *from)
{
char *vfrom, *vto;
/* --- Defines for bit-adapters --------------------------------------- */
/*
- * This struct contains the hw-dependent functions of bit-style adapters to
+ * This struct contains the hw-dependent functions of bit-style adapters to
* manipulate the line states, and to init any hw-specific features. This is
- * only used if you have more than one hw-type of adapter running.
+ * only used if you have more than one hw-type of adapter running.
*/
struct i2c_algo_bit_data {
void *data; /* private data for lowlevel routines */
};
int i2c_bit_add_bus(struct i2c_adapter *);
-int i2c_bit_del_bus(struct i2c_adapter *);
#endif /* _LINUX_I2C_ALGO_BIT_H */
+++ /dev/null
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-ite.h i2c driver algorithms for ITE IIC adapters */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 1995-97 Simon G. Vogl
- 1998-99 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
- Frodo Looijaard <frodol@dds.nl> */
-
-/* Modifications by MontaVista Software, 2001
- Changes made to support the ITE IIC peripheral */
-
-
-#ifndef I2C_ALGO_ITE_H
-#define I2C_ALGO_ITE_H 1
-
-#include <linux/types.h>
-
-/* Example of a sequential read request:
- struct i2c_iic_msg s_msg;
-
- s_msg.addr=device_address;
- s_msg.len=length;
- s_msg.buf=buffer;
- s_msg.waddr=word_address;
- ioctl(file,I2C_SREAD, &s_msg);
- */
-#define I2C_SREAD 0x780 /* SREAD ioctl command */
-
-struct i2c_iic_msg {
- __u16 addr; /* device address */
- __u16 waddr; /* word address */
- short len; /* msg length */
- char *buf; /* pointer to msg data */
-};
-
-#ifdef __KERNEL__
-struct i2c_adapter;
-
-struct i2c_algo_iic_data {
- void *data; /* private data for lolevel routines */
- void (*setiic) (void *data, int ctl, int val);
- int (*getiic) (void *data, int ctl);
- int (*getown) (void *data);
- int (*getclock) (void *data);
- void (*waitforpin) (void);
-
- /* local settings */
- int udelay;
- int mdelay;
- int timeout;
-};
-
-int i2c_iic_add_bus(struct i2c_adapter *);
-int i2c_iic_del_bus(struct i2c_adapter *);
-#endif /* __KERNEL__ */
-#endif /* I2C_ALGO_ITE_H */
};
int i2c_pca_add_bus(struct i2c_adapter *);
-int i2c_pca_del_bus(struct i2c_adapter *);
#endif /* _LINUX_I2C_ALGO_PCA_H */
int (*getpcf) (void *data, int ctl);
int (*getown) (void *data);
int (*getclock) (void *data);
- void (*waitforpin) (void);
+ void (*waitforpin) (void);
/* local settings */
int udelay;
};
int i2c_pcf_add_bus(struct i2c_adapter *);
-int i2c_pcf_del_bus(struct i2c_adapter *);
#endif /* _LINUX_I2C_ALGO_PCF_H */
};
int i2c_sgi_add_bus(struct i2c_adapter *);
-int i2c_sgi_del_bus(struct i2c_adapter *);
#endif /* I2C_ALGO_SGI_H */
/* ------------------------------------------------------------------------- */
-/* */
+/* */
/* i2c-id.h - identifier values for i2c drivers and adapters */
-/* */
+/* */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-1999 Simon G. Vogl
#define I2C_DRIVERID_SAA7120 11 /* video encoder */
#define I2C_DRIVERID_SAA7121 12 /* video encoder */
#define I2C_DRIVERID_SAA7185B 13 /* video encoder */
-#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */
+#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */
#define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */
#define I2C_DRIVERID_PCF8582C 16 /* eeprom */
-#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */
+#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */
#define I2C_DRIVERID_TEA6300 18 /* audio mixer */
#define I2C_DRIVERID_BT829 19 /* pc to tv encoder */
#define I2C_DRIVERID_TDA9850 20 /* audio mixer */
#define I2C_DRIVERID_STM41T00 52 /* real time clock */
#define I2C_DRIVERID_UDA1342 53 /* UDA1342 audio codec */
#define I2C_DRIVERID_ADV7170 54 /* video encoder */
-#define I2C_DRIVERID_RADEON 55 /* I2C bus on Radeon boards */
#define I2C_DRIVERID_MAX1617 56 /* temp sensor */
-#define I2C_DRIVERID_SAA7191 57 /* video encoder */
+#define I2C_DRIVERID_SAA7191 57 /* video decoder */
#define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */
#define I2C_DRIVERID_BT832 59 /* CMOS camera video processor */
#define I2C_DRIVERID_TDA9887 60 /* TDA988x IF-PLL demodulator */
#define I2C_DRIVERID_ADM1021 1008
#define I2C_DRIVERID_ADM9240 1009
#define I2C_DRIVERID_LTC1710 1010
-#define I2C_DRIVERID_ICSPLL 1012
#define I2C_DRIVERID_BT869 1013
#define I2C_DRIVERID_MAXILIFE 1014
#define I2C_DRIVERID_MATORB 1015
#define I2C_DRIVERID_MTP008 1023
#define I2C_DRIVERID_DS1621 1024
#define I2C_DRIVERID_ADM1024 1025
-#define I2C_DRIVERID_IT87 1026
#define I2C_DRIVERID_CH700X 1027 /* single driver for CH7003-7009 digital pc to tv encoders */
#define I2C_DRIVERID_FSCPOS 1028
#define I2C_DRIVERID_FSCSCY 1029
#define I2C_DRIVERID_ASB100 1043
#define I2C_DRIVERID_FSCHER 1046
#define I2C_DRIVERID_W83L785TS 1047
+#define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */
/*
* ---- Adapter types ----------------------------------------------------
*/
-/* --- Bit algorithm adapters */
+/* --- Bit algorithm adapters */
#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */
#define I2C_HW_B_SER 0x010002 /* Serial line interface */
#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
/* --- MPC8xx PowerPC adapters */
#define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */
-/* --- ITE based algorithms */
-#define I2C_HW_I_IIC 0x080000 /* controller on the ITE */
-
/* --- PowerPC on-chip adapters */
#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */
#define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */
#define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */
#define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */
+#define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */
/* --- ISA pseudo-adapter */
#define I2C_HW_ISA 0x050000
--- /dev/null
+/*
+ * Header file for I2C support on PNX010x/4008.
+ *
+ * Author: Dennis Kovalev <dkovalev@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __I2C_PNX_H__
+#define __I2C_PNX_H__
+
+#include <asm/arch/i2c.h>
+
+struct i2c_pnx_mif {
+ int ret; /* Return value */
+ int mode; /* Interface mode */
+ struct completion complete; /* I/O completion */
+ struct timer_list timer; /* Timeout */
+ char * buf; /* Data buffer */
+ int len; /* Length of data buffer */
+};
+
+struct i2c_pnx_algo_data {
+ u32 base;
+ u32 ioaddr;
+ int irq;
+ struct i2c_pnx_mif mif;
+ int last;
+};
+
+struct i2c_pnx_data {
+ int (*suspend) (struct platform_device *pdev, pm_message_t state);
+ int (*resume) (struct platform_device *pdev);
+ u32 (*calculate_input_freq) (struct platform_device *pdev);
+ int (*set_clock_run) (struct platform_device *pdev);
+ int (*set_clock_stop) (struct platform_device *pdev);
+ struct i2c_adapter *adapter;
+};
+
+#endif /* __I2C_PNX_H__ */
/* ------------------------------------------------------------------------- */
-/* */
+/* */
/* i2c.h - definitions for the i2c-bus interface */
-/* */
+/* */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-2000 Simon G. Vogl
#define _LINUX_I2C_H
#include <linux/types.h>
-#ifdef __KERNEL__
+#ifdef __KERNEL__
#include <linux/module.h>
#include <linux/i2c-id.h>
#include <linux/mod_devicetable.h>
/*
* The master routines are the ones normally used to transmit data to devices
- * on a bus (or read from them). Apart from two basic transfer functions to
- * transmit one message at a time, a more complex version can be used to
+ * on a bus (or read from them). Apart from two basic transfer functions to
+ * transmit one message at a time, a more complex version can be used to
* transmit an arbitrary number of messages without interruption.
*/
extern int i2c_master_send(struct i2c_client *,const char* ,int);
/* This is the very generalized SMBus access routine. You probably do not
want to use this, though; one of the functions below may be much easier,
- and probably just as fast.
+ and probably just as fast.
Note that we use i2c_adapter here, because you do not need a specific
smbus adapter to call this function. */
-extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
+extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
char read_write, u8 command, int size,
union i2c_smbus_data * data);
/* Notifies the driver that a new bus has appeared. This routine
* can be used by the driver to test if the bus meets its conditions
- * & seek for the presence of the chip(s) it supports. If found, it
+ * & seek for the presence of the chip(s) it supports. If found, it
* registers the client(s) that are on the bus to the i2c admin. via
* i2c_attach_client.
*/
int (*attach_adapter)(struct i2c_adapter *);
int (*detach_adapter)(struct i2c_adapter *);
- /* tells the driver that a client is about to be deleted & gives it
+ /* tells the driver that a client is about to be deleted & gives it
* the chance to remove its private data. Also, if the client struct
* has been dynamically allocated by the driver in the function above,
* it must be freed here.
#define I2C_NAME_SIZE 50
/*
- * i2c_client identifies a single device (i.e. chip) that is connected to an
+ * i2c_client identifies a single device (i.e. chip) that is connected to an
* i2c bus. The behaviour is defined by the routines of the driver. This
* function is mainly used for lookup & other admin. functions.
*/
struct i2c_client {
unsigned int flags; /* div., see below */
- unsigned short addr; /* chip address - NOTE: 7bit */
+ unsigned short addr; /* chip address - NOTE: 7bit */
/* addresses are stored in the */
/* _LOWER_ 7 bits */
struct i2c_adapter *adapter; /* the adapter we sit on */
*/
struct i2c_algorithm {
/* If an adapter algorithm can't do I2C-level access, set master_xfer
- to NULL. If an adapter algorithm can do SMBus access, set
+ to NULL. If an adapter algorithm can do SMBus access, set
smbus_xfer. If set to NULL, the SMBus protocol is simulated
using common I2C messages */
/* master_xfer should return the number of messages successfully
processed, or a negative value on error */
- int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
+ int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
int num);
- int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
+ int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data);
int (*client_unregister)(struct i2c_client *);
/* data fields that are valid for all devices */
+ u8 level; /* nesting level for lockdep */
struct mutex bus_lock;
struct mutex clist_lock;
* It will only call found_proc if some client is connected at the
* specific address (unless a 'force' matched);
*/
-extern int i2c_probe(struct i2c_adapter *adapter,
+extern int i2c_probe(struct i2c_adapter *adapter,
struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int));
*/
struct i2c_msg {
__u16 addr; /* slave address */
- __u16 flags;
+ __u16 flags;
#define I2C_M_TEN 0x10 /* we have a ten bit chip address */
#define I2C_M_RD 0x01
#define I2C_M_NOSTART 0x4000
#define I2C_M_REV_DIR_ADDR 0x2000
#define I2C_M_IGNORE_NAK 0x1000
#define I2C_M_NO_RD_ACK 0x0800
- __u16 len; /* msg length */
- __u8 *buf; /* pointer to msg data */
+ __u16 len; /* msg length */
+ __u8 *buf; /* pointer to msg data */
};
/* To determine what functionality is present */
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
#define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK 0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_QUICK 0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
-/*
- * Data for SMBus Messages
+/*
+ * Data for SMBus Messages
*/
-#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
+#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
union i2c_smbus_data {
__u8 byte;
__u16 word;
#define I2C_SMBUS_READ 1
#define I2C_SMBUS_WRITE 0
-/* SMBus transaction types (size parameter in the above functions)
+/* SMBus transaction types (size parameter in the above functions)
Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
#define I2C_SMBUS_QUICK 0
#define I2C_SMBUS_BYTE 1
-#define I2C_SMBUS_BYTE_DATA 2
+#define I2C_SMBUS_BYTE_DATA 2
#define I2C_SMBUS_WORD_DATA 3
#define I2C_SMBUS_PROC_CALL 4
#define I2C_SMBUS_BLOCK_DATA 5
/* ----- commands for the ioctl like i2c_command call:
- * note that additional calls are defined in the algorithm and hw
- * dependent layers - these can be listed here, or see the
+ * note that additional calls are defined in the algorithm and hw
+ * dependent layers - these can be listed here, or see the
* corresponding header files.
*/
/* -> bit-adapter specific ioctls */
#define I2C_RETRIES 0x0701 /* number of times a device address */
/* should be polled when not */
- /* acknowledging */
-#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
+ /* acknowledging */
+#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
/* this is for i2c-dev.c */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */
unsigned err_stops_fifo : 1; /* 1=data FIFO is cleared by an error */
+ unsigned atapi_irq_bogon : 1; /* Generates spurious DMA interrupts in PIO mode */
struct device gendev;
struct completion gendev_rel_comp; /* To deal with device release() */
void *hwif_data; /* extra hwif data */
unsigned dma;
-
- void (*led_act)(void *data, int rw);
} ____cacheline_internodealigned_in_smp ide_hwif_t;
/*
__u32 tstamp; /* updated timestamp, hundredths of seconds */
};
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg))))
+#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg))
+#endif
+
#endif
#define IFLA_MAX (__IFLA_MAX - 1)
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
+#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
+#endif
+
/* ifi_flags.
IFF_* flags.
#define subsys_initcall_sync(fn) __define_initcall("4s",fn,4s)
#define fs_initcall(fn) __define_initcall("5",fn,5)
#define fs_initcall_sync(fn) __define_initcall("5s",fn,5s)
+#define rootfs_initcall(fn) __define_initcall("rootfs",fn,rootfs)
#define device_initcall(fn) __define_initcall("6",fn,6)
#define device_initcall_sync(fn) __define_initcall("6s",fn,6s)
#define late_initcall(fn) __define_initcall("7",fn,7)
#include <linux/utsname.h>
#include <linux/lockdep.h>
#include <linux/ipc.h>
+#include <linux/pid_namespace.h>
#define INIT_FDTABLE \
{ \
.max_fds = NR_OPEN_DEFAULT, \
- .max_fdset = EMBEDDED_FD_SET_SIZE, \
.fd = &init_files.fd_array[0], \
.close_on_exec = (fd_set *)&init_files.close_on_exec_init, \
.open_fds = (fd_set *)&init_files.open_fds_init, \
.rcu = RCU_HEAD_INIT, \
- .free_files = NULL, \
.next = NULL, \
}
.cpu_vm_mask = CPU_MASK_ALL, \
}
-#define INIT_SIGNALS(sig) { \
- .count = ATOMIC_INIT(1), \
+#define INIT_SIGNALS(sig) { \
+ .count = ATOMIC_INIT(1), \
.wait_chldexit = __WAIT_QUEUE_HEAD_INITIALIZER(sig.wait_chldexit),\
- .shared_pending = { \
+ .shared_pending = { \
.list = LIST_HEAD_INIT(sig.shared_pending.list), \
- .signal = {{0}}}, \
+ .signal = {{0}}}, \
.posix_timers = LIST_HEAD_INIT(sig.posix_timers), \
.cpu_timers = INIT_CPU_TIMERS(sig.cpu_timers), \
.rlim = INIT_RLIMITS, \
.pgrp = 1, \
- .session = 1, \
+ .tty_old_pgrp = 0, \
+ { .__session = 1}, \
}
extern struct nsproxy init_nsproxy;
#define INIT_NSPROXY(nsproxy) { \
+ .pid_ns = &init_pid_ns, \
.count = ATOMIC_INIT(1), \
.nslock = __SPIN_LOCK_UNLOCKED(nsproxy.nslock), \
.uts_ns = &init_uts_ns, \
- .namespace = NULL, \
+ .mnt_ns = NULL, \
INIT_IPC_NS(ipc_ns) \
}
#define BUS_GSC 0x1A
/*
- * Values describing the status of an effect
+ * Values describing the status of a force-feedback effect
*/
#define FF_STATUS_STOPPED 0x00
#define FF_STATUS_PLAYING 0x01
*/
/**
- * struct ff_replay - defines scheduling of the effect
+ * struct ff_replay - defines scheduling of the force-feedback effect
* @length: duration of the effect
* @delay: delay before effect should start playing
*/
};
/**
- * struct ff_trigger - defines what triggers the effect
+ * struct ff_trigger - defines what triggers the force-feedback effect
* @button: number of the button triggering the effect
* @interval: controls how soon the effect can be re-triggered
*/
};
/**
- * struct ff_envelope - generic effect envelope
+ * struct ff_envelope - generic force-feedback effect envelope
* @attack_length: duration of the attack (ms)
* @attack_level: level at the beginning of the attack
* @fade_length: duration of fade (ms)
};
/**
- * struct ff_constant_effect - defines parameters of a constant effect
+ * struct ff_constant_effect - defines parameters of a constant force-feedback effect
* @level: strength of the effect; may be negative
* @envelope: envelope data
*/
};
/**
- * struct ff_ramp_effect - defines parameters of a ramp effect
+ * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
* @start_level: beginning strength of the effect; may be negative
* @end_level: final strength of the effect; may be negative
* @envelope: envelope data
};
/**
- * struct ff_condition_effect - defines a spring or friction effect
+ * struct ff_condition_effect - defines a spring or friction force-feedback effect
* @right_saturation: maximum level when joystick moved all way to the right
* @left_saturation: same for the left side
* @right_coeff: controls how fast the force grows when the joystick moves
};
/**
- * struct ff_periodic_effect - defines parameters of a periodic effect
+ * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
* @waveform: kind of the effect (wave)
* @period: period of the wave (ms)
* @magnitude: peak value
};
/**
- * struct ff_rumble_effect - defines parameters of a periodic effect
+ * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
* @strong_magnitude: magnitude of the heavy motor
* @weak_magnitude: magnitude of the light one
*
NET_TX_SOFTIRQ,
NET_RX_SOFTIRQ,
BLOCK_SOFTIRQ,
- TASKLET_SOFTIRQ
+ TASKLET_SOFTIRQ,
+ SCHED_SOFTIRQ,
};
/* softirq mask and active fields moved to irq_cpustat_t in
#endif
struct tty_struct *tty; /* Pointer to corresponding tty */
atemu emu; /* AT-emulator data */
- struct termios normal_termios; /* For saving termios structs */
- struct termios callout_termios;
+ struct ktermios normal_termios; /* For saving termios structs */
+ struct ktermios callout_termios;
wait_queue_head_t open_wait, close_wait;
struct semaphore write_sem;
spinlock_t readlock;
int refcount; /* Number of opens */
struct tty_driver *tty_modem; /* tty-device */
struct tty_struct *modem_table[ISDN_MAX_CHANNELS]; /* ?? copied from Orig */
- struct termios *modem_termios[ISDN_MAX_CHANNELS];
- struct termios *modem_termios_locked[ISDN_MAX_CHANNELS];
+ struct ktermios *modem_termios[ISDN_MAX_CHANNELS];
+ struct ktermios *modem_termios_locked[ISDN_MAX_CHANNELS];
modem_info info[ISDN_MAX_CHANNELS]; /* Private data */
} isdn_modem_t;
* communication with the slave board will always be on a per port
* basis.
*/
-typedef struct {
+struct stliport {
unsigned long magic;
- int portnr;
- int panelnr;
- int brdnr;
+ unsigned int portnr;
+ unsigned int panelnr;
+ unsigned int brdnr;
unsigned long state;
- int devnr;
+ unsigned int devnr;
int flags;
int baud_base;
int custom_divisor;
wait_queue_head_t close_wait;
wait_queue_head_t raw_wait;
struct work_struct tqhangup;
- asysigs_t asig;
+ struct asysigs asig;
unsigned long addr;
unsigned long rxoffset;
unsigned long txoffset;
unsigned char reqbit;
unsigned char portidx;
unsigned char portbit;
-} stliport_t;
+};
/*
* Use a structure of function pointers to do board level operations.
* These include, enable/disable, paging shared memory, interrupting, etc.
*/
-typedef struct stlibrd {
+struct stlibrd {
unsigned long magic;
- int brdnr;
- int brdtype;
- int state;
- int nrpanels;
- int nrports;
- int nrdevs;
+ unsigned int brdnr;
+ unsigned int brdtype;
+ unsigned int state;
+ unsigned int nrpanels;
+ unsigned int nrports;
+ unsigned int nrdevs;
unsigned int iobase;
int iosize;
unsigned long memaddr;
void __iomem *membase;
- int memsize;
+ unsigned long memsize;
int pagesize;
int hostoffset;
int slaveoffset;
int bitsize;
int enabval;
- int panels[STL_MAXPANELS];
+ unsigned int panels[STL_MAXPANELS];
int panelids[STL_MAXPANELS];
void (*init)(struct stlibrd *brdp);
void (*enable)(struct stlibrd *brdp);
void __iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
void (*intr)(struct stlibrd *brdp);
void (*reset)(struct stlibrd *brdp);
- stliport_t *ports[STL_MAXPORTS];
-} stlibrd_t;
+ struct stliport *ports[STL_MAXPORTS];
+};
/*
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/bitops.h>
+#include <linux/log2.h>
#include <asm/byteorder.h>
#include <asm/bug.h>
-extern const char linux_banner[];
-
#define INT_MAX ((int)(~0U>>1))
#define INT_MIN (-INT_MAX - 1)
#define UINT_MAX (~0U)
unsigned long int_sqrt(unsigned long);
-static inline int __attribute_pure__ long_log2(unsigned long x)
-{
- int r = 0;
- for (x >>= 1; x > 0; x >>= 1)
- r++;
- return r;
-}
-
-static inline unsigned long
-__attribute_const__ roundup_pow_of_two(unsigned long x)
-{
- return 1UL << fls_long(x - 1);
-}
-
extern int printk_ratelimit(void);
extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
--- /dev/null
+#ifndef __LINUX_KVM_H
+#define __LINUX_KVM_H
+
+/*
+ * Userspace interface for /dev/kvm - kernel based virtual machine
+ *
+ * Note: this interface is considered experimental and may change without
+ * notice.
+ */
+
+#include <asm/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * Architectural interrupt line count, and the size of the bitmap needed
+ * to hold them.
+ */
+#define KVM_NR_INTERRUPTS 256
+#define KVM_IRQ_BITMAP_SIZE_BYTES ((KVM_NR_INTERRUPTS + 7) / 8)
+#define KVM_IRQ_BITMAP_SIZE(type) (KVM_IRQ_BITMAP_SIZE_BYTES / sizeof(type))
+
+
+/* for KVM_CREATE_MEMORY_REGION */
+struct kvm_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES 1UL
+
+
+#define KVM_EXIT_TYPE_FAIL_ENTRY 1
+#define KVM_EXIT_TYPE_VM_EXIT 2
+
+enum kvm_exit_reason {
+ KVM_EXIT_UNKNOWN = 0,
+ KVM_EXIT_EXCEPTION = 1,
+ KVM_EXIT_IO = 2,
+ KVM_EXIT_CPUID = 3,
+ KVM_EXIT_DEBUG = 4,
+ KVM_EXIT_HLT = 5,
+ KVM_EXIT_MMIO = 6,
+};
+
+/* for KVM_RUN */
+struct kvm_run {
+ /* in */
+ __u32 vcpu;
+ __u32 emulated; /* skip current instruction */
+ __u32 mmio_completed; /* mmio request completed */
+
+ /* out */
+ __u32 exit_type;
+ __u32 exit_reason;
+ __u32 instruction_length;
+ union {
+ /* KVM_EXIT_UNKNOWN */
+ struct {
+ __u32 hardware_exit_reason;
+ } hw;
+ /* KVM_EXIT_EXCEPTION */
+ struct {
+ __u32 exception;
+ __u32 error_code;
+ } ex;
+ /* KVM_EXIT_IO */
+ struct {
+#define KVM_EXIT_IO_IN 0
+#define KVM_EXIT_IO_OUT 1
+ __u8 direction;
+ __u8 size; /* bytes */
+ __u8 string;
+ __u8 string_down;
+ __u8 rep;
+ __u8 pad;
+ __u16 port;
+ __u64 count;
+ union {
+ __u64 address;
+ __u32 value;
+ };
+ } io;
+ struct {
+ } debug;
+ /* KVM_EXIT_MMIO */
+ struct {
+ __u64 phys_addr;
+ __u8 data[8];
+ __u32 len;
+ __u8 is_write;
+ } mmio;
+ };
+};
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+ /* in */
+ __u32 vcpu;
+ __u32 padding;
+
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 rax, rbx, rcx, rdx;
+ __u64 rsi, rdi, rsp, rbp;
+ __u64 r8, r9, r10, r11;
+ __u64 r12, r13, r14, r15;
+ __u64 rip, rflags;
+};
+
+struct kvm_segment {
+ __u64 base;
+ __u32 limit;
+ __u16 selector;
+ __u8 type;
+ __u8 present, dpl, db, s, l, g, avl;
+ __u8 unusable;
+ __u8 padding;
+};
+
+struct kvm_dtable {
+ __u64 base;
+ __u16 limit;
+ __u16 padding[3];
+};
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+ /* in */
+ __u32 vcpu;
+ __u32 padding;
+
+ /* out (KVM_GET_SREGS) / in (KVM_SET_SREGS) */
+ struct kvm_segment cs, ds, es, fs, gs, ss;
+ struct kvm_segment tr, ldt;
+ struct kvm_dtable gdt, idt;
+ __u64 cr0, cr2, cr3, cr4, cr8;
+ __u64 efer;
+ __u64 apic_base;
+ __u64 interrupt_bitmap[KVM_IRQ_BITMAP_SIZE(__u64)];
+};
+
+struct kvm_msr_entry {
+ __u32 index;
+ __u32 reserved;
+ __u64 data;
+};
+
+/* for KVM_GET_MSRS and KVM_SET_MSRS */
+struct kvm_msrs {
+ __u32 vcpu;
+ __u32 nmsrs; /* number of msrs in entries */
+
+ struct kvm_msr_entry entries[0];
+};
+
+/* for KVM_GET_MSR_INDEX_LIST */
+struct kvm_msr_list {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 indices[0];
+};
+
+/* for KVM_TRANSLATE */
+struct kvm_translation {
+ /* in */
+ __u64 linear_address;
+ __u32 vcpu;
+ __u32 padding;
+
+ /* out */
+ __u64 physical_address;
+ __u8 valid;
+ __u8 writeable;
+ __u8 usermode;
+};
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+ /* in */
+ __u32 vcpu;
+ __u32 irq;
+};
+
+struct kvm_breakpoint {
+ __u32 enabled;
+ __u32 padding;
+ __u64 address;
+};
+
+/* for KVM_DEBUG_GUEST */
+struct kvm_debug_guest {
+ /* int */
+ __u32 vcpu;
+ __u32 enabled;
+ struct kvm_breakpoint breakpoints[4];
+ __u32 singlestep;
+};
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+ __u32 slot;
+ __u32 padding;
+ union {
+ void __user *dirty_bitmap; /* one bit per page */
+ __u64 padding;
+ };
+};
+
+#define KVMIO 0xAE
+
+#define KVM_RUN _IOWR(KVMIO, 2, struct kvm_run)
+#define KVM_GET_REGS _IOWR(KVMIO, 3, struct kvm_regs)
+#define KVM_SET_REGS _IOW(KVMIO, 4, struct kvm_regs)
+#define KVM_GET_SREGS _IOWR(KVMIO, 5, struct kvm_sregs)
+#define KVM_SET_SREGS _IOW(KVMIO, 6, struct kvm_sregs)
+#define KVM_TRANSLATE _IOWR(KVMIO, 7, struct kvm_translation)
+#define KVM_INTERRUPT _IOW(KVMIO, 8, struct kvm_interrupt)
+#define KVM_DEBUG_GUEST _IOW(KVMIO, 9, struct kvm_debug_guest)
+#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 10, struct kvm_memory_region)
+#define KVM_CREATE_VCPU _IOW(KVMIO, 11, int /* vcpu_slot */)
+#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 12, struct kvm_dirty_log)
+#define KVM_GET_MSRS _IOWR(KVMIO, 13, struct kvm_msrs)
+#define KVM_SET_MSRS _IOWR(KVMIO, 14, struct kvm_msrs)
+#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 15, struct kvm_msr_list)
+
+#endif
* This is the set of functions for lockd->nfsd communication
*/
struct nlmsvc_binding {
- u32 (*fopen)(struct svc_rqst *,
+ __be32 (*fopen)(struct svc_rqst *,
struct nfs_fh *,
struct file **);
void (*fclose)(struct file *);
unsigned long nlmsvc_retry_blocked(void);
void nlmsvc_traverse_blocks(struct nlm_host *, struct nlm_file *,
nlm_host_match_fn_t match);
-void nlmsvc_grant_reply(struct nlm_cookie *, u32);
+void nlmsvc_grant_reply(struct nlm_cookie *, __be32);
/*
* File handling for the server personality
static __inline__ struct inode *
nlmsvc_file_inode(struct nlm_file *file)
{
- return file->f_file->f_dentry->d_inode;
+ return file->f_file->f_path.dentry->d_inode;
}
/*
* Arguments for all calls to statd
*/
struct nsm_args {
- u32 addr; /* remote address */
+ __be32 addr; /* remote address */
u32 prog; /* RPC callback info */
u32 vers;
u32 proc;
*/
struct nlm_res {
struct nlm_cookie cookie;
- u32 status;
+ __be32 status;
struct nlm_lock lock;
};
char * mon;
int len;
u32 state;
- u32 addr;
- u32 vers;
- u32 proto;
+ __be32 addr;
+ __be32 vers;
+ __be32 proto;
};
/*
#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_GENERIC_HARDIRQS)
extern void early_init_irq_lock_class(void);
#else
-# define early_init_irq_lock_class() do { } while (0)
+static inline void early_init_irq_lock_class(void)
+{
+}
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
extern void early_boot_irqs_off(void);
extern void early_boot_irqs_on(void);
+extern void print_irqtrace_events(struct task_struct *curr);
#else
-# define early_boot_irqs_off() do { } while (0)
-# define early_boot_irqs_on() do { } while (0)
+static inline void early_boot_irqs_off(void)
+{
+}
+static inline void early_boot_irqs_on(void)
+{
+}
+static inline void print_irqtrace_events(struct task_struct *curr)
+{
+}
#endif
/*
--- /dev/null
+/* Integer base 2 logarithm calculation
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_LOG2_H
+#define _LINUX_LOG2_H
+
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+/*
+ * deal with unrepresentable constant logarithms
+ */
+extern __attribute__((const, noreturn))
+int ____ilog2_NaN(void);
+
+/*
+ * non-constant log of base 2 calculators
+ * - the arch may override these in asm/bitops.h if they can be implemented
+ * more efficiently than using fls() and fls64()
+ * - the arch is not required to handle n==0 if implementing the fallback
+ */
+#ifndef CONFIG_ARCH_HAS_ILOG2_U32
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+ return fls(n) - 1;
+}
+#endif
+
+#ifndef CONFIG_ARCH_HAS_ILOG2_U64
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+ return fls64(n) - 1;
+}
+#endif
+
+/*
+ * round up to nearest power of two
+ */
+static inline __attribute__((const))
+unsigned long __roundup_pow_of_two(unsigned long n)
+{
+ return 1UL << fls_long(n - 1);
+}
+
+/**
+ * ilog2 - log of base 2 of 32-bit or a 64-bit unsigned value
+ * @n - parameter
+ *
+ * constant-capable log of base 2 calculation
+ * - this can be used to initialise global variables from constant data, hence
+ * the massive ternary operator construction
+ *
+ * selects the appropriately-sized optimised version depending on sizeof(n)
+ */
+#define ilog2(n) \
+( \
+ __builtin_constant_p(n) ? ( \
+ (n) < 1 ? ____ilog2_NaN() : \
+ (n) & (1ULL << 63) ? 63 : \
+ (n) & (1ULL << 62) ? 62 : \
+ (n) & (1ULL << 61) ? 61 : \
+ (n) & (1ULL << 60) ? 60 : \
+ (n) & (1ULL << 59) ? 59 : \
+ (n) & (1ULL << 58) ? 58 : \
+ (n) & (1ULL << 57) ? 57 : \
+ (n) & (1ULL << 56) ? 56 : \
+ (n) & (1ULL << 55) ? 55 : \
+ (n) & (1ULL << 54) ? 54 : \
+ (n) & (1ULL << 53) ? 53 : \
+ (n) & (1ULL << 52) ? 52 : \
+ (n) & (1ULL << 51) ? 51 : \
+ (n) & (1ULL << 50) ? 50 : \
+ (n) & (1ULL << 49) ? 49 : \
+ (n) & (1ULL << 48) ? 48 : \
+ (n) & (1ULL << 47) ? 47 : \
+ (n) & (1ULL << 46) ? 46 : \
+ (n) & (1ULL << 45) ? 45 : \
+ (n) & (1ULL << 44) ? 44 : \
+ (n) & (1ULL << 43) ? 43 : \
+ (n) & (1ULL << 42) ? 42 : \
+ (n) & (1ULL << 41) ? 41 : \
+ (n) & (1ULL << 40) ? 40 : \
+ (n) & (1ULL << 39) ? 39 : \
+ (n) & (1ULL << 38) ? 38 : \
+ (n) & (1ULL << 37) ? 37 : \
+ (n) & (1ULL << 36) ? 36 : \
+ (n) & (1ULL << 35) ? 35 : \
+ (n) & (1ULL << 34) ? 34 : \
+ (n) & (1ULL << 33) ? 33 : \
+ (n) & (1ULL << 32) ? 32 : \
+ (n) & (1ULL << 31) ? 31 : \
+ (n) & (1ULL << 30) ? 30 : \
+ (n) & (1ULL << 29) ? 29 : \
+ (n) & (1ULL << 28) ? 28 : \
+ (n) & (1ULL << 27) ? 27 : \
+ (n) & (1ULL << 26) ? 26 : \
+ (n) & (1ULL << 25) ? 25 : \
+ (n) & (1ULL << 24) ? 24 : \
+ (n) & (1ULL << 23) ? 23 : \
+ (n) & (1ULL << 22) ? 22 : \
+ (n) & (1ULL << 21) ? 21 : \
+ (n) & (1ULL << 20) ? 20 : \
+ (n) & (1ULL << 19) ? 19 : \
+ (n) & (1ULL << 18) ? 18 : \
+ (n) & (1ULL << 17) ? 17 : \
+ (n) & (1ULL << 16) ? 16 : \
+ (n) & (1ULL << 15) ? 15 : \
+ (n) & (1ULL << 14) ? 14 : \
+ (n) & (1ULL << 13) ? 13 : \
+ (n) & (1ULL << 12) ? 12 : \
+ (n) & (1ULL << 11) ? 11 : \
+ (n) & (1ULL << 10) ? 10 : \
+ (n) & (1ULL << 9) ? 9 : \
+ (n) & (1ULL << 8) ? 8 : \
+ (n) & (1ULL << 7) ? 7 : \
+ (n) & (1ULL << 6) ? 6 : \
+ (n) & (1ULL << 5) ? 5 : \
+ (n) & (1ULL << 4) ? 4 : \
+ (n) & (1ULL << 3) ? 3 : \
+ (n) & (1ULL << 2) ? 2 : \
+ (n) & (1ULL << 1) ? 1 : \
+ (n) & (1ULL << 0) ? 0 : \
+ ____ilog2_NaN() \
+ ) : \
+ (sizeof(n) <= 4) ? \
+ __ilog2_u32(n) : \
+ __ilog2_u64(n) \
+ )
+
+/**
+ * roundup_pow_of_two - round the given value up to nearest power of two
+ * @n - parameter
+ *
+ * round the given balue up to the nearest power of two
+ * - the result is undefined when n == 0
+ * - this can be used to initialise global variables from constant data
+ */
+#define roundup_pow_of_two(n) \
+( \
+ __builtin_constant_p(n) ? ( \
+ (n == 1) ? 0 : \
+ (1UL << (ilog2((n) - 1) + 1)) \
+ ) : \
+ __roundup_pow_of_two(n) \
+ )
+
+#endif /* _LINUX_LOG2_H */
--- /dev/null
+#ifndef _NAMESPACE_H_
+#define _NAMESPACE_H_
+#ifdef __KERNEL__
+
+#include <linux/mount.h>
+#include <linux/sched.h>
+#include <linux/nsproxy.h>
+
+struct mnt_namespace {
+ atomic_t count;
+ struct vfsmount * root;
+ struct list_head list;
+ wait_queue_head_t poll;
+ int event;
+};
+
+extern int copy_mnt_ns(int, struct task_struct *);
+extern void __put_mnt_ns(struct mnt_namespace *ns);
+extern struct mnt_namespace *dup_mnt_ns(struct task_struct *,
+ struct fs_struct *);
+
+static inline void put_mnt_ns(struct mnt_namespace *ns)
+{
+ if (atomic_dec_and_lock(&ns->count, &vfsmount_lock))
+ /* releases vfsmount_lock */
+ __put_mnt_ns(ns);
+}
+
+static inline void exit_mnt_ns(struct task_struct *p)
+{
+ struct mnt_namespace *ns = p->nsproxy->mnt_ns;
+ if (ns)
+ put_mnt_ns(ns);
+}
+
+static inline void get_mnt_ns(struct mnt_namespace *ns)
+{
+ atomic_inc(&ns->count);
+}
+
+#endif
+#endif
unsigned int taints; /* same bits as kernel:tainted */
+#ifdef CONFIG_GENERIC_BUG
+ /* Support for BUG */
+ struct list_head bug_list;
+ struct bug_entry *bug_table;
+ unsigned num_bugs;
+#endif
+
#ifdef CONFIG_MODULE_UNLOAD
/* Reference counts */
struct module_ref ref[NR_CPUS];
struct super_block;
struct vfsmount;
struct dentry;
-struct namespace;
+struct mnt_namespace;
#define MNT_NOSUID 0x01
#define MNT_NODEV 0x02
#define MNT_NOEXEC 0x04
#define MNT_NOATIME 0x08
#define MNT_NODIRATIME 0x10
+#define MNT_RELATIME 0x20
#define MNT_SHRINKABLE 0x100
struct list_head mnt_slave_list;/* list of slave mounts */
struct list_head mnt_slave; /* slave list entry */
struct vfsmount *mnt_master; /* slave is on master->mnt_slave_list */
- struct namespace *mnt_namespace; /* containing namespace */
+ struct mnt_namespace *mnt_ns; /* containing namespace */
int mnt_pinned;
};
#ifdef CONFIG_DEBUG_LOCK_ALLOC
extern void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
+extern int mutex_lock_interruptible_nested(struct mutex *lock, unsigned int subclass);
#else
# define mutex_lock_nested(lock, subclass) mutex_lock(lock)
+# define mutex_lock_interruptible_nested(lock, subclass) mutex_lock_interruptible(lock)
#endif
/*
struct r3964_client_info {
spinlock_t lock;
- pid_t pid;
+ struct pid *pid;
unsigned int sig_flags;
struct r3964_client_info *next;
} intent;
};
+struct path {
+ struct vfsmount *mnt;
+ struct dentry *dentry;
+};
+
/*
* Type of the last component on LOOKUP_PARENT
*/
+++ /dev/null
-#ifndef _NAMESPACE_H_
-#define _NAMESPACE_H_
-#ifdef __KERNEL__
-
-#include <linux/mount.h>
-#include <linux/sched.h>
-#include <linux/nsproxy.h>
-
-struct namespace {
- atomic_t count;
- struct vfsmount * root;
- struct list_head list;
- wait_queue_head_t poll;
- int event;
-};
-
-extern int copy_namespace(int, struct task_struct *);
-extern void __put_namespace(struct namespace *namespace);
-extern struct namespace *dup_namespace(struct task_struct *, struct fs_struct *);
-
-static inline void put_namespace(struct namespace *namespace)
-{
- if (atomic_dec_and_lock(&namespace->count, &vfsmount_lock))
- /* releases vfsmount_lock */
- __put_namespace(namespace);
-}
-
-static inline void exit_namespace(struct task_struct *p)
-{
- struct namespace *namespace = p->nsproxy->namespace;
- if (namespace) {
- put_namespace(namespace);
- }
-}
-
-static inline void get_namespace(struct namespace *namespace)
-{
- atomic_inc(&namespace->count);
-}
-
-#endif
-#endif
unsigned int int_flags; /* internal flags */
#define NCP_IMOUNT_LOGGEDIN_POSSIBLE 0x0001
__kernel_uid32_t mounted_uid; /* Who may umount() this filesystem? */
- __kernel_pid_t wdog_pid; /* Who cares for our watchdog packets? */
+ struct pid *wdog_pid; /* Who cares for our watchdog packets? */
unsigned int ncp_fd; /* The socket to the ncp port */
unsigned int time_out; /* How long should I wait after
sending a NCP request? */
{
struct hh_cache *hh_next; /* Next entry */
atomic_t hh_refcnt; /* number of users */
- __be16 hh_type; /* protocol identifier, f.e ETH_P_IP
+/*
+ * We want hh_output, hh_len, hh_lock and hh_data be a in a separate
+ * cache line on SMP.
+ * They are mostly read, but hh_refcnt may be changed quite frequently,
+ * incurring cache line ping pongs.
+ */
+ __be16 hh_type ____cacheline_aligned_in_smp;
+ /* protocol identifier, f.e ETH_P_IP
* NOTE: For VLANs, this will be the
* encapuslated type. --BLG
*/
u16 hh_len; /* length of header */
int (*hh_output)(struct sk_buff *skb);
- rwlock_t hh_lock;
+ seqlock_t hh_lock;
/* cached hardware header; allow for machine alignment needs. */
#define HH_DATA_MOD 16
} daddr;
};
-extern int brnf_deferred_hooks;
#else
#define nf_bridge_maybe_copy_header(skb) (0)
#define nf_bridge_pad(skb) (0)
NF_IP_PRI_RAW = -300,
NF_IP_PRI_SELINUX_FIRST = -225,
NF_IP_PRI_CONNTRACK = -200,
- NF_IP_PRI_BRIDGE_SABOTAGE_FORWARD = -175,
NF_IP_PRI_MANGLE = -150,
NF_IP_PRI_NAT_DST = -100,
- NF_IP_PRI_BRIDGE_SABOTAGE_LOCAL_OUT = -50,
NF_IP_PRI_FILTER = 0,
NF_IP_PRI_NAT_SRC = 100,
NF_IP_PRI_SELINUX_LAST = 225,
NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
NF_IP6_PRI_SELINUX_FIRST = -225,
NF_IP6_PRI_CONNTRACK = -200,
- NF_IP6_PRI_BRIDGE_SABOTAGE_FORWARD = -175,
NF_IP6_PRI_MANGLE = -150,
NF_IP6_PRI_NAT_DST = -100,
- NF_IP6_PRI_BRIDGE_SABOTAGE_LOCAL_OUT = -50,
NF_IP6_PRI_FILTER = 0,
NF_IP6_PRI_NAT_SRC = 100,
NF_IP6_PRI_SELINUX_LAST = 225,
* we might process an operation with side effects, and be unable to
* tell the client that the operation succeeded.
*
- * COMPOUND_SLACK_SPACE - this is the minimum amount of buffer space
+ * COMPOUND_SLACK_SPACE - this is the minimum bytes of buffer space
* needed to encode an "ordinary" _successful_ operation. (GETATTR,
* READ, READDIR, and READLINK have their own buffer checks.) if we
* fall below this level, we fail the next operation with NFS4ERR_RESOURCE.
*
- * COMPOUND_ERR_SLACK_SPACE - this is the minimum amount of buffer space
+ * COMPOUND_ERR_SLACK_SPACE - this is the minimum bytes of buffer space
* needed to encode an operation which has failed with NFS4ERR_RESOURCE.
* care is taken to ensure that we never fall below this level for any
* reason.
((err) != nfserr_stale_stateid) && \
((err) != nfserr_bad_stateid))
-extern __be32 nfsd4_renew(clientid_t *clid);
extern __be32 nfs4_preprocess_stateid_op(struct svc_fh *current_fh,
stateid_t *stateid, int flags, struct file **filp);
extern void nfs4_lock_state(void);
#define NFSD4_MAX_TAGLEN 128
#define XDR_LEN(n) (((n) + 3) & ~3)
+struct nfsd4_compound_state {
+ struct svc_fh current_fh;
+ struct svc_fh save_fh;
+ struct nfs4_stateowner *replay_owner;
+};
+
struct nfsd4_change_info {
u32 atomic;
u32 before_ctime_sec;
struct dentry *dentry, __be32 *buffer, int *countp,
u32 *bmval, struct svc_rqst *);
extern __be32 nfsd4_setclientid(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *,
struct nfsd4_setclientid *setclid);
extern __be32 nfsd4_setclientid_confirm(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *,
struct nfsd4_setclientid_confirm *setclientid_confirm);
extern __be32 nfsd4_process_open1(struct nfsd4_open *open);
extern __be32 nfsd4_process_open2(struct svc_rqst *rqstp,
struct svc_fh *current_fh, struct nfsd4_open *open);
extern __be32 nfsd4_open_confirm(struct svc_rqst *rqstp,
- struct svc_fh *current_fh, struct nfsd4_open_confirm *oc,
- struct nfs4_stateowner **);
-extern __be32 nfsd4_close(struct svc_rqst *rqstp, struct svc_fh *current_fh,
- struct nfsd4_close *close,
- struct nfs4_stateowner **replay_owner);
+ struct nfsd4_compound_state *, struct nfsd4_open_confirm *oc);
+extern __be32 nfsd4_close(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *,
+ struct nfsd4_close *close);
extern __be32 nfsd4_open_downgrade(struct svc_rqst *rqstp,
- struct svc_fh *current_fh, struct nfsd4_open_downgrade *od,
- struct nfs4_stateowner **replay_owner);
-extern __be32 nfsd4_lock(struct svc_rqst *rqstp, struct svc_fh *current_fh,
- struct nfsd4_lock *lock,
- struct nfs4_stateowner **replay_owner);
-extern __be32 nfsd4_lockt(struct svc_rqst *rqstp, struct svc_fh *current_fh,
+ struct nfsd4_compound_state *,
+ struct nfsd4_open_downgrade *od);
+extern __be32 nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *,
+ struct nfsd4_lock *lock);
+extern __be32 nfsd4_lockt(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *,
struct nfsd4_lockt *lockt);
-extern __be32 nfsd4_locku(struct svc_rqst *rqstp, struct svc_fh *current_fh,
- struct nfsd4_locku *locku,
- struct nfs4_stateowner **replay_owner);
+extern __be32 nfsd4_locku(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *,
+ struct nfsd4_locku *locku);
extern __be32
nfsd4_release_lockowner(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *,
struct nfsd4_release_lockowner *rlockowner);
extern void nfsd4_release_compoundargs(struct nfsd4_compoundargs *);
extern __be32 nfsd4_delegreturn(struct svc_rqst *rqstp,
- struct svc_fh *current_fh, struct nfsd4_delegreturn *dr);
+ struct nfsd4_compound_state *, struct nfsd4_delegreturn *dr);
+extern __be32 nfsd4_renew(struct svc_rqst *rqstp,
+ struct nfsd4_compound_state *, clientid_t *clid);
#endif
/*
#include <linux/spinlock.h>
#include <linux/sched.h>
-struct namespace;
+struct mnt_namespace;
struct uts_namespace;
struct ipc_namespace;
+struct pid_namespace;
/*
* A structure to contain pointers to all per-process
spinlock_t nslock;
struct uts_namespace *uts_ns;
struct ipc_namespace *ipc_ns;
- struct namespace *namespace;
+ struct mnt_namespace *mnt_ns;
+ struct pid_namespace *pid_ns;
};
extern struct nsproxy init_nsproxy;
#define PCI_DEVICE_ID_MOXA_C104 0x1040
#define PCI_DEVICE_ID_MOXA_CP104U 0x1041
#define PCI_DEVICE_ID_MOXA_CP104JU 0x1042
+#define PCI_DEVICE_ID_MOXA_CP104EL 0x1043
#define PCI_DEVICE_ID_MOXA_CT114 0x1140
#define PCI_DEVICE_ID_MOXA_CP114 0x1141
#define PCI_DEVICE_ID_MOXA_CP118U 0x1180
+#define PCI_DEVICE_ID_MOXA_CP118EL 0x1181
#define PCI_DEVICE_ID_MOXA_CP132 0x1320
#define PCI_DEVICE_ID_MOXA_CP132U 0x1321
#define PCI_DEVICE_ID_MOXA_CP134U 0x1340
#define PCI_DEVICE_ID_MOXA_C168 0x1680
#define PCI_DEVICE_ID_MOXA_CP168U 0x1681
+#define PCI_DEVICE_ID_MOXA_CP168EL 0x1682
#define PCI_VENDOR_ID_CCD 0x1397
#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0
#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366
#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368
+#define PCI_VENDOR_ID_KORENIX 0x1982
+#define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600
+#define PCI_DEVICE_ID_KORENIX_JETCARDF1 0x16ff
+
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
*
* Holding a reference to struct pid solves both of these problems.
* It is small so holding a reference does not consume a lot of
- * resources, and since a new struct pid is allocated when the numeric
- * pid value is reused we don't mistakenly refer to new processes.
+ * resources, and since a new struct pid is allocated when the numeric pid
+ * value is reused (when pids wrap around) we don't mistakenly refer to new
+ * processes.
*/
struct pid
--- /dev/null
+#ifndef _LINUX_PID_NS_H
+#define _LINUX_PID_NS_H
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/threads.h>
+#include <linux/pid.h>
+#include <linux/nsproxy.h>
+#include <linux/kref.h>
+
+struct pidmap {
+ atomic_t nr_free;
+ void *page;
+};
+
+#define PIDMAP_ENTRIES ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8)
+
+struct pid_namespace {
+ struct kref kref;
+ struct pidmap pidmap[PIDMAP_ENTRIES];
+ int last_pid;
+ struct task_struct *child_reaper;
+};
+
+extern struct pid_namespace init_pid_ns;
+
+static inline void get_pid_ns(struct pid_namespace *ns)
+{
+ kref_get(&ns->kref);
+}
+
+extern int copy_pid_ns(int flags, struct task_struct *tsk);
+extern void free_pid_ns(struct kref *kref);
+
+static inline void put_pid_ns(struct pid_namespace *ns)
+{
+ kref_put(&ns->kref, free_pid_ns);
+}
+
+static inline struct task_struct *child_reaper(struct task_struct *tsk)
+{
+ return tsk->nsproxy->pid_ns->child_reaper;
+}
+
+#endif /* _LINUX_PID_NS_H */
struct pipe_buffer {
struct page *page;
unsigned int offset, len;
- struct pipe_buf_operations *ops;
+ const struct pipe_buf_operations *ops;
unsigned int flags;
};
struct pipe_inode_info {
wait_queue_head_t wait;
unsigned int nrbufs, curbuf;
- struct pipe_buffer bufs[PIPE_BUFFERS];
struct page *tmp_page;
- unsigned int start;
unsigned int readers;
unsigned int writers;
unsigned int waiting_writers;
struct fasync_struct *fasync_readers;
struct fasync_struct *fasync_writers;
struct inode *inode;
+ struct pipe_buffer bufs[PIPE_BUFFERS];
};
/* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/cdrom.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+/* default bio write queue congestion marks */
+#define PKT_WRITE_CONGESTION_ON 10000
+#define PKT_WRITE_CONGESTION_OFF 9000
+
struct packet_settings
{
};
#define PSD_POOL_SIZE 64
+struct pktcdvd_kobj
+{
+ struct kobject kobj;
+ struct pktcdvd_device *pd;
+};
+#define to_pktcdvdkobj(_k) \
+ ((struct pktcdvd_kobj*)container_of(_k,struct pktcdvd_kobj,kobj))
+
struct pktcdvd_device
{
struct block_device *bdev; /* dev attached */
struct packet_iosched iosched;
struct gendisk *disk;
+
+ int write_congestion_off;
+ int write_congestion_on;
+
+ struct class_device *clsdev; /* sysfs pktcdvd[0-7] class dev */
+ struct pktcdvd_kobj *kobj_stat; /* sysfs pktcdvd[0-7]/stat/ */
+ struct pktcdvd_kobj *kobj_wqueue; /* sysfs pktcdvd[0-7]/write_queue/ */
+
+ struct dentry *dfs_d_root; /* debugfs: devname directory */
+ struct dentry *dfs_f_info; /* debugfs: info file */
};
#endif /* __KERNEL__ */
extern struct platform_device *platform_device_alloc(const char *name, unsigned int id);
extern int platform_device_add_resources(struct platform_device *pdev, struct resource *res, unsigned int num);
-extern int platform_device_add_data(struct platform_device *pdev, void *data, size_t size);
+extern int platform_device_add_data(struct platform_device *pdev, const void *data, size_t size);
extern int platform_device_add(struct platform_device *pdev);
extern void platform_device_del(struct platform_device *pdev);
extern void platform_device_put(struct platform_device *pdev);
+++ /dev/null
-#ifndef _LINUX_PSPACE_H
-#define _LINUX_PSPACE_H
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/threads.h>
-#include <linux/pid.h>
-
-struct pidmap {
- atomic_t nr_free;
- void *page;
-};
-
-#define PIDMAP_ENTRIES ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8)
-
-struct pspace {
- struct pidmap pidmap[PIDMAP_ENTRIES];
- int last_pid;
-};
-
-extern struct pspace init_pspace;
-
-#endif /* _LINUX_PSPACE_H */
struct list_head handle_list; /* stripes needing handling */
struct list_head delayed_list; /* stripes that have plugged requests */
struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */
+ struct bio *retry_read_aligned; /* currently retrying aligned bios */
+ struct bio *retry_read_aligned_list; /* aligned bios retry list */
atomic_t preread_active_stripes; /* stripes with scheduled io */
+ atomic_t active_aligned_reads;
atomic_t reshape_stripes; /* stripes with pending writes for reshape */
/* unfortunately we need two cache names as we temporarily have
--- /dev/null
+#ifndef _LINUX_RECIPROCAL_DIV_H
+#define _LINUX_RECIPROCAL_DIV_H
+
+#include <linux/types.h>
+
+/*
+ * This file describes reciprocical division.
+ *
+ * This optimizes the (A/B) problem, when A and B are two u32
+ * and B is a known value (but not known at compile time)
+ *
+ * The math principle used is :
+ * Let RECIPROCAL_VALUE(B) be (((1LL << 32) + (B - 1))/ B)
+ * Then A / B = (u32)(((u64)(A) * (R)) >> 32)
+ *
+ * This replaces a divide by a multiply (and a shift), and
+ * is generally less expensive in CPU cycles.
+ */
+
+/*
+ * Computes the reciprocal value (R) for the value B of the divisor.
+ * Should not be called before each reciprocal_divide(),
+ * or else the performance is slower than a normal divide.
+ */
+extern u32 reciprocal_value(u32 B);
+
+
+static inline u32 reciprocal_divide(u32 A, u32 R)
+{
+ return (u32)(((u64)A * R) >> 32);
+}
+#endif
#define PATH_READA 0x1 /* do read ahead */
#define PATH_READA_BACK 0x2 /* read backwards */
-struct path {
+struct treepath {
int path_length; /* Length of the array above. */
int reada;
struct path_element path_elements[EXTENDED_MAX_HEIGHT]; /* Array of the path elements. */
#define pos_in_item(path) ((path)->pos_in_item)
#define INITIALIZE_PATH(var) \
-struct path var = {.path_length = ILLEGAL_PATH_ELEMENT_OFFSET, .reada = 0,}
+struct treepath var = {.path_length = ILLEGAL_PATH_ELEMENT_OFFSET, .reada = 0,}
/* Get path element by path and path position. */
#define PATH_OFFSET_PELEMENT(p_s_path,n_offset) ((p_s_path)->path_elements +(n_offset))
int need_balance_dirty;
struct super_block *tb_sb;
struct reiserfs_transaction_handle *transaction_handle;
- struct path *tb_path;
+ struct treepath *tb_path;
struct buffer_head *L[MAX_HEIGHT]; /* array of left neighbors of nodes in the path */
struct buffer_head *R[MAX_HEIGHT]; /* array of right neighbors of nodes in the path */
struct buffer_head *FL[MAX_HEIGHT]; /* array of fathers of the left neighbors */
memcpy(to, from, KEY_SIZE);
}
-int comp_items(const struct item_head *stored_ih, const struct path *p_s_path);
-const struct reiserfs_key *get_rkey(const struct path *p_s_chk_path,
+int comp_items(const struct item_head *stored_ih, const struct treepath *p_s_path);
+const struct reiserfs_key *get_rkey(const struct treepath *p_s_chk_path,
const struct super_block *p_s_sb);
int search_by_key(struct super_block *, const struct cpu_key *,
- struct path *, int);
+ struct treepath *, int);
#define search_item(s,key,path) search_by_key (s, key, path, DISK_LEAF_NODE_LEVEL)
int search_for_position_by_key(struct super_block *p_s_sb,
const struct cpu_key *p_s_cpu_key,
- struct path *p_s_search_path);
+ struct treepath *p_s_search_path);
extern void decrement_bcount(struct buffer_head *p_s_bh);
-void decrement_counters_in_path(struct path *p_s_search_path);
-void pathrelse(struct path *p_s_search_path);
-int reiserfs_check_path(struct path *p);
-void pathrelse_and_restore(struct super_block *s, struct path *p_s_search_path);
+void decrement_counters_in_path(struct treepath *p_s_search_path);
+void pathrelse(struct treepath *p_s_search_path);
+int reiserfs_check_path(struct treepath *p);
+void pathrelse_and_restore(struct super_block *s, struct treepath *p_s_search_path);
int reiserfs_insert_item(struct reiserfs_transaction_handle *th,
- struct path *path,
+ struct treepath *path,
const struct cpu_key *key,
struct item_head *ih,
struct inode *inode, const char *body);
int reiserfs_paste_into_item(struct reiserfs_transaction_handle *th,
- struct path *path,
+ struct treepath *path,
const struct cpu_key *key,
struct inode *inode,
const char *body, int paste_size);
int reiserfs_cut_from_item(struct reiserfs_transaction_handle *th,
- struct path *path,
+ struct treepath *path,
struct cpu_key *key,
struct inode *inode,
struct page *page, loff_t new_file_size);
int reiserfs_delete_item(struct reiserfs_transaction_handle *th,
- struct path *path,
+ struct treepath *path,
const struct cpu_key *key,
struct inode *inode, struct buffer_head *p_s_un_bh);
#define GET_BLOCK_NO_DANGLE 16 /* don't leave any transactions running */
int restart_transaction(struct reiserfs_transaction_handle *th,
- struct inode *inode, struct path *path);
+ struct inode *inode, struct treepath *path);
void reiserfs_read_locked_inode(struct inode *inode,
struct reiserfs_iget_args *args);
int reiserfs_find_actor(struct inode *inode, void *p);
/* namei.c */
void set_de_name_and_namelen(struct reiserfs_dir_entry *de);
int search_by_entry_key(struct super_block *sb, const struct cpu_key *key,
- struct path *path, struct reiserfs_dir_entry *de);
+ struct treepath *path, struct reiserfs_dir_entry *de);
struct dentry *reiserfs_get_parent(struct dentry *);
/* procfs.c */
/* tail_conversion.c */
int direct2indirect(struct reiserfs_transaction_handle *, struct inode *,
- struct path *, struct buffer_head *, loff_t);
+ struct treepath *, struct buffer_head *, loff_t);
int indirect2direct(struct reiserfs_transaction_handle *, struct inode *,
- struct page *, struct path *, const struct cpu_key *,
+ struct page *, struct treepath *, const struct cpu_key *,
loff_t, char *);
void reiserfs_unmap_buffer(struct buffer_head *);
struct inode *inode; /* inode passed to allocator, if we allocate unf. nodes */
long block; /* file offset, in blocks */
struct in_core_key key;
- struct path *path; /* search path, used by allocator to deternine search_start by
+ struct treepath *path; /* search path, used by allocator to deternine search_start by
* various ways */
struct reiserfs_transaction_handle *th; /* transaction handle is needed to log super blocks and
* bitmap blocks changes */
static inline int reiserfs_new_unf_blocknrs(struct reiserfs_transaction_handle
*th, struct inode *inode,
b_blocknr_t * new_blocknrs,
- struct path *path, long block)
+ struct treepath *path, long block)
{
reiserfs_blocknr_hint_t hint = {
.th = th,
static inline int reiserfs_new_unf_blocknrs2(struct reiserfs_transaction_handle
*th, struct inode *inode,
b_blocknr_t * new_blocknrs,
- struct path *path, long block)
+ struct treepath *path, long block)
{
reiserfs_blocknr_hint_t hint = {
.th = th,
extern int rtc_valid_tm(struct rtc_time *tm);
extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time);
extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
+extern void rtc_merge_alarm(struct rtc_time *now, struct rtc_time *alarm);
#include <linux/device.h>
#include <linux/seq_file.h>
#include <linux/netlink.h>
#include <linux/if_link.h>
+#include <linux/if_addr.h>
+#include <linux/neighbour.h>
/****
* Routing/neighbour discovery messages.
#include <linux/resource.h>
#include <linux/timer.h>
#include <linux/hrtimer.h>
+#include <linux/task_io_accounting.h>
#include <asm/processor.h>
/* job control IDs */
pid_t pgrp;
pid_t tty_old_pgrp;
- pid_t session;
+
+ union {
+ pid_t session __deprecated;
+ pid_t __session;
+ };
+
/* boolean value for session group leader */
int leader;
#define SD_SHARE_CPUPOWER 128 /* Domain members share cpu power */
#define SD_POWERSAVINGS_BALANCE 256 /* Balance for power savings */
#define SD_SHARE_PKG_RESOURCES 512 /* Domain members share cpu pkg resources */
+#define SD_SERIALIZE 1024 /* Only a single load balancing instance */
#define BALANCE_FOR_MC_POWER \
(sched_smt_power_savings ? SD_POWERSAVINGS_BALANCE : 0)
wait_queue_t *io_wait;
/* i/o counters(bytes read/written, #syscalls */
u64 rchar, wchar, syscr, syscw;
+ struct task_io_accounting ioac;
#if defined(CONFIG_TASK_XACCT)
u64 acct_rss_mem1; /* accumulated rss usage */
u64 acct_vm_mem1; /* accumulated virtual memory usage */
#ifdef CONFIG_TASK_DELAY_ACCT
struct task_delay_info *delays;
#endif
+#ifdef CONFIG_FAULT_INJECTION
+ int make_it_fail;
+#endif
};
static inline pid_t process_group(struct task_struct *tsk)
return tsk->signal->pgrp;
}
+static inline pid_t signal_session(struct signal_struct *sig)
+{
+ return sig->__session;
+}
+
+static inline pid_t process_session(struct task_struct *tsk)
+{
+ return signal_session(tsk->signal);
+}
+
+static inline void set_signal_session(struct signal_struct *sig, pid_t session)
+{
+ sig->__session = session;
+}
+
static inline struct pid *task_pid(struct task_struct *task)
{
return task->pids[PIDTYPE_PID].pid;
#define PF_MEMALLOC 0x00000800 /* Allocating memory */
#define PF_FLUSHER 0x00001000 /* responsible for disk writeback */
#define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */
-#define PF_FREEZE 0x00004000 /* this task is being frozen for suspend now */
#define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */
#define PF_FROZEN 0x00010000 /* frozen for system suspend */
#define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */
#define find_task_by_pid(nr) find_task_by_pid_type(PIDTYPE_PID, nr)
extern struct task_struct *find_task_by_pid_type(int type, int pid);
-extern void set_special_pids(pid_t session, pid_t pgrp);
extern void __set_special_pids(pid_t session, pid_t pgrp);
/* per-UID process charging. */
extern void daemonize(const char *, ...);
extern int allow_signal(int);
extern int disallow_signal(int);
-extern struct task_struct *child_reaper;
extern int do_execve(char *, char __user * __user *, char __user * __user *, struct pt_regs *);
extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *);
#define SEQLOCK_UNLOCKED \
__SEQLOCK_UNLOCKED(old_style_seqlock_init)
-#define seqlock_init(x) \
- do { *(x) = (seqlock_t) __SEQLOCK_UNLOCKED(x); } while (0)
+#define seqlock_init(x) \
+ do { \
+ (x)->sequence = 0; \
+ spin_lock_init(&(x)->lock); \
+ } while (0)
#define DEFINE_SEQLOCK(x) \
seqlock_t x = __SEQLOCK_UNLOCKED(x)
void (*break_ctl)(struct uart_port *, int ctl);
int (*startup)(struct uart_port *);
void (*shutdown)(struct uart_port *);
- void (*set_termios)(struct uart_port *, struct termios *new,
- struct termios *old);
+ void (*set_termios)(struct uart_port *, struct ktermios *new,
+ struct ktermios *old);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
*/
void uart_update_timeout(struct uart_port *port, unsigned int cflag,
unsigned int baud);
-unsigned int uart_get_baud_rate(struct uart_port *port, struct termios *termios,
- struct termios *old, unsigned int min,
+unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old, unsigned int min,
unsigned int max);
unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
void serio_unregister_port(struct serio *serio);
void serio_unregister_child_port(struct serio *serio);
-void __serio_unregister_port_delayed(struct serio *serio, struct module *owner);
-static inline void serio_unregister_port_delayed(struct serio *serio)
-{
- __serio_unregister_port_delayed(serio, THIS_MODULE);
-}
-
-void __serio_register_driver(struct serio_driver *drv, struct module *owner);
-static inline void serio_register_driver(struct serio_driver *drv)
-{
- __serio_register_driver(drv, THIS_MODULE);
-}
+int serio_register_driver(struct serio_driver *drv);
void serio_unregister_driver(struct serio_driver *drv);
static inline int serio_write(struct serio *serio, unsigned char data)
/*
- * linux/include/linux/slab.h
- * Written by Mark Hemment, 1996.
- * (markhe@nextd.demon.co.uk)
+ * Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk).
+ *
+ * (C) SGI 2006, Christoph Lameter <clameter@sgi.com>
+ * Cleaned up and restructured to ease the addition of alternative
+ * implementations of SLAB allocators.
*/
#ifndef _LINUX_SLAB_H
#ifdef __KERNEL__
#include <linux/gfp.h>
-#include <linux/init.h>
#include <linux/types.h>
-#include <asm/page.h> /* kmalloc_sizes.h needs PAGE_SIZE */
-#include <asm/cache.h> /* kmalloc_sizes.h needs L1_CACHE_BYTES */
-#include <linux/compiler.h>
-/* kmem_cache_t exists for legacy reasons and is not used by code in mm */
typedef struct kmem_cache kmem_cache_t __deprecated;
-/* flags to pass to kmem_cache_create().
- * The first 3 are only valid when the allocator as been build
- * SLAB_DEBUG_SUPPORT.
+/*
+ * Flags to pass to kmem_cache_create().
+ * The ones marked DEBUG are only valid if CONFIG_SLAB_DEBUG is set.
*/
-#define SLAB_DEBUG_FREE 0x00000100UL /* Peform (expensive) checks on free */
-#define SLAB_DEBUG_INITIAL 0x00000200UL /* Call constructor (as verifier) */
-#define SLAB_RED_ZONE 0x00000400UL /* Red zone objs in a cache */
-#define SLAB_POISON 0x00000800UL /* Poison objects */
-#define SLAB_HWCACHE_ALIGN 0x00002000UL /* align objs on a h/w cache lines */
-#define SLAB_CACHE_DMA 0x00004000UL /* use GFP_DMA memory */
-#define SLAB_MUST_HWCACHE_ALIGN 0x00008000UL /* force alignment */
-#define SLAB_STORE_USER 0x00010000UL /* store the last owner for bug hunting */
-#define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* track pages allocated to indicate
- what is reclaimable later*/
-#define SLAB_PANIC 0x00040000UL /* panic if kmem_cache_create() fails */
-#define SLAB_DESTROY_BY_RCU 0x00080000UL /* defer freeing pages to RCU */
+#define SLAB_DEBUG_FREE 0x00000100UL /* DEBUG: Perform (expensive) checks on free */
+#define SLAB_DEBUG_INITIAL 0x00000200UL /* DEBUG: Call constructor (as verifier) */
+#define SLAB_RED_ZONE 0x00000400UL /* DEBUG: Red zone objs in a cache */
+#define SLAB_POISON 0x00000800UL /* DEBUG: Poison objects */
+#define SLAB_HWCACHE_ALIGN 0x00002000UL /* Align objs on cache lines */
+#define SLAB_CACHE_DMA 0x00004000UL /* Use GFP_DMA memory */
+#define SLAB_MUST_HWCACHE_ALIGN 0x00008000UL /* Force alignment even if debuggin is active */
+#define SLAB_STORE_USER 0x00010000UL /* DEBUG: Store the last owner for bug hunting */
+#define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* Objects are reclaimable */
+#define SLAB_PANIC 0x00040000UL /* Panic if kmem_cache_create() fails */
+#define SLAB_DESTROY_BY_RCU 0x00080000UL /* Defer freeing slabs to RCU */
#define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */
-/* flags passed to a constructor func */
-#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* if not set, then deconstructor */
-#define SLAB_CTOR_ATOMIC 0x002UL /* tell constructor it can't sleep */
-#define SLAB_CTOR_VERIFY 0x004UL /* tell constructor it's a verify call */
+/* Flags passed to a constructor functions */
+#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* If not set, then deconstructor */
+#define SLAB_CTOR_ATOMIC 0x002UL /* Tell constructor it can't sleep */
+#define SLAB_CTOR_VERIFY 0x004UL /* Tell constructor it's a verify call */
-#ifndef CONFIG_SLOB
-
-/* prototypes */
-extern void __init kmem_cache_init(void);
+/*
+ * struct kmem_cache related prototypes
+ */
+void __init kmem_cache_init(void);
+extern int slab_is_available(void);
-extern struct kmem_cache *kmem_cache_create(const char *, size_t, size_t,
+struct kmem_cache *kmem_cache_create(const char *, size_t, size_t,
unsigned long,
void (*)(void *, struct kmem_cache *, unsigned long),
void (*)(void *, struct kmem_cache *, unsigned long));
-extern void kmem_cache_destroy(struct kmem_cache *);
-extern int kmem_cache_shrink(struct kmem_cache *);
-extern void *kmem_cache_alloc(struct kmem_cache *, gfp_t);
-extern void *kmem_cache_zalloc(struct kmem_cache *, gfp_t);
-extern void kmem_cache_free(struct kmem_cache *, void *);
-extern unsigned int kmem_cache_size(struct kmem_cache *);
-extern const char *kmem_cache_name(struct kmem_cache *);
+void kmem_cache_destroy(struct kmem_cache *);
+int kmem_cache_shrink(struct kmem_cache *);
+void *kmem_cache_alloc(struct kmem_cache *, gfp_t);
+void *kmem_cache_zalloc(struct kmem_cache *, gfp_t);
+void kmem_cache_free(struct kmem_cache *, void *);
+unsigned int kmem_cache_size(struct kmem_cache *);
+const char *kmem_cache_name(struct kmem_cache *);
+int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr);
+
+#ifdef CONFIG_NUMA
+extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
+#else
+static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep,
+ gfp_t flags, int node)
+{
+ return kmem_cache_alloc(cachep, flags);
+}
+#endif
+
+/*
+ * Common kmalloc functions provided by all allocators
+ */
+void *__kmalloc(size_t, gfp_t);
+void *__kzalloc(size_t, gfp_t);
+void kfree(const void *);
+unsigned int ksize(const void *);
+
+/**
+ * kcalloc - allocate memory for an array. The memory is set to zero.
+ * @n: number of elements.
+ * @size: element size.
+ * @flags: the type of memory to allocate.
+ */
+static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
+{
+ if (n != 0 && size > ULONG_MAX / n)
+ return NULL;
+ return __kzalloc(n * size, flags);
+}
-/* Size description struct for general caches. */
-struct cache_sizes {
- size_t cs_size;
- struct kmem_cache *cs_cachep;
- struct kmem_cache *cs_dmacachep;
-};
-extern struct cache_sizes malloc_sizes[];
+/*
+ * Allocator specific definitions. These are mainly used to establish optimized
+ * ways to convert kmalloc() calls to kmem_cache_alloc() invocations by selecting
+ * the appropriate general cache at compile time.
+ */
-extern void *__kmalloc(size_t, gfp_t);
+#ifdef CONFIG_SLAB
+#include <linux/slab_def.h>
+#else
+/*
+ * Fallback definitions for an allocator not wanting to provide
+ * its own optimized kmalloc definitions (like SLOB).
+ */
/**
* kmalloc - allocate memory
*/
static inline void *kmalloc(size_t size, gfp_t flags)
{
- if (__builtin_constant_p(size)) {
- int i = 0;
-#define CACHE(x) \
- if (size <= x) \
- goto found; \
- else \
- i++;
-#include "kmalloc_sizes.h"
-#undef CACHE
- {
- extern void __you_cannot_kmalloc_that_much(void);
- __you_cannot_kmalloc_that_much();
- }
-found:
- return kmem_cache_alloc((flags & GFP_DMA) ?
- malloc_sizes[i].cs_dmacachep :
- malloc_sizes[i].cs_cachep, flags);
- }
return __kmalloc(size, flags);
}
-/*
- * kmalloc_track_caller is a special version of kmalloc that records the
- * calling function of the routine calling it for slab leak tracking instead
- * of just the calling function (confusing, eh?).
- * It's useful when the call to kmalloc comes from a widely-used standard
- * allocator where we care about the real place the memory allocation
- * request comes from.
- */
-#ifndef CONFIG_DEBUG_SLAB
-#define kmalloc_track_caller(size, flags) \
- __kmalloc(size, flags)
-#else
-extern void *__kmalloc_track_caller(size_t, gfp_t, void*);
-#define kmalloc_track_caller(size, flags) \
- __kmalloc_track_caller(size, flags, __builtin_return_address(0))
-#endif
-
-extern void *__kzalloc(size_t, gfp_t);
-
/**
* kzalloc - allocate memory. The memory is set to zero.
* @size: how many bytes of memory are required.
*/
static inline void *kzalloc(size_t size, gfp_t flags)
{
- if (__builtin_constant_p(size)) {
- int i = 0;
-#define CACHE(x) \
- if (size <= x) \
- goto found; \
- else \
- i++;
-#include "kmalloc_sizes.h"
-#undef CACHE
- {
- extern void __you_cannot_kzalloc_that_much(void);
- __you_cannot_kzalloc_that_much();
- }
-found:
- return kmem_cache_zalloc((flags & GFP_DMA) ?
- malloc_sizes[i].cs_dmacachep :
- malloc_sizes[i].cs_cachep, flags);
- }
return __kzalloc(size, flags);
}
+#endif
-/**
- * kcalloc - allocate memory for an array. The memory is set to zero.
- * @n: number of elements.
- * @size: element size.
- * @flags: the type of memory to allocate.
- */
-static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
+#ifndef CONFIG_NUMA
+static inline void *kmalloc_node(size_t size, gfp_t flags, int node)
{
- if (n != 0 && size > ULONG_MAX / n)
- return NULL;
- return kzalloc(n * size, flags);
+ return kmalloc(size, flags);
}
-extern void kfree(const void *);
-extern unsigned int ksize(const void *);
-extern int slab_is_available(void);
-
-#ifdef CONFIG_NUMA
-extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
-extern void *__kmalloc_node(size_t size, gfp_t flags, int node);
-
-static inline void *kmalloc_node(size_t size, gfp_t flags, int node)
+static inline void *__kmalloc_node(size_t size, gfp_t flags, int node)
{
- if (__builtin_constant_p(size)) {
- int i = 0;
-#define CACHE(x) \
- if (size <= x) \
- goto found; \
- else \
- i++;
-#include "kmalloc_sizes.h"
-#undef CACHE
- {
- extern void __you_cannot_kmalloc_that_much(void);
- __you_cannot_kmalloc_that_much();
- }
-found:
- return kmem_cache_alloc_node((flags & GFP_DMA) ?
- malloc_sizes[i].cs_dmacachep :
- malloc_sizes[i].cs_cachep, flags, node);
- }
- return __kmalloc_node(size, flags, node);
+ return __kmalloc(size, flags);
}
+#endif /* !CONFIG_NUMA */
/*
+ * kmalloc_track_caller is a special version of kmalloc that records the
+ * calling function of the routine calling it for slab leak tracking instead
+ * of just the calling function (confusing, eh?).
+ * It's useful when the call to kmalloc comes from a widely-used standard
+ * allocator where we care about the real place the memory allocation
+ * request comes from.
+ */
+#ifdef CONFIG_DEBUG_SLAB
+extern void *__kmalloc_track_caller(size_t, gfp_t, void*);
+#define kmalloc_track_caller(size, flags) \
+ __kmalloc_track_caller(size, flags, __builtin_return_address(0))
+#else
+#define kmalloc_track_caller(size, flags) \
+ __kmalloc(size, flags)
+#endif /* DEBUG_SLAB */
+
+#ifdef CONFIG_NUMA
+/*
* kmalloc_node_track_caller is a special version of kmalloc_node that
* records the calling function of the routine calling it for slab leak
* tracking instead of just the calling function (confusing, eh?).
* standard allocator where we care about the real place the memory
* allocation request comes from.
*/
-#ifndef CONFIG_DEBUG_SLAB
-#define kmalloc_node_track_caller(size, flags, node) \
- __kmalloc_node(size, flags, node)
-#else
+#ifdef CONFIG_DEBUG_SLAB
extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, void *);
#define kmalloc_node_track_caller(size, flags, node) \
__kmalloc_node_track_caller(size, flags, node, \
__builtin_return_address(0))
+#else
+#define kmalloc_node_track_caller(size, flags, node) \
+ __kmalloc_node(size, flags, node)
#endif
+
#else /* CONFIG_NUMA */
-static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep,
- gfp_t flags, int node)
-{
- return kmem_cache_alloc(cachep, flags);
-}
-static inline void *kmalloc_node(size_t size, gfp_t flags, int node)
-{
- return kmalloc(size, flags);
-}
#define kmalloc_node_track_caller(size, flags, node) \
kmalloc_track_caller(size, flags)
-#endif
-extern int FASTCALL(kmem_cache_reap(int));
-extern int FASTCALL(kmem_ptr_validate(struct kmem_cache *cachep, void *ptr));
-
-#else /* CONFIG_SLOB */
-
-/* SLOB allocator routines */
-
-void kmem_cache_init(void);
-struct kmem_cache *kmem_cache_create(const char *c, size_t, size_t,
- unsigned long,
- void (*)(void *, struct kmem_cache *, unsigned long),
- void (*)(void *, struct kmem_cache *, unsigned long));
-void kmem_cache_destroy(struct kmem_cache *c);
-void *kmem_cache_alloc(struct kmem_cache *c, gfp_t flags);
-void *kmem_cache_zalloc(struct kmem_cache *, gfp_t);
-void kmem_cache_free(struct kmem_cache *c, void *b);
-const char *kmem_cache_name(struct kmem_cache *);
-void *kmalloc(size_t size, gfp_t flags);
-void *__kzalloc(size_t size, gfp_t flags);
-void kfree(const void *m);
-unsigned int ksize(const void *m);
-unsigned int kmem_cache_size(struct kmem_cache *c);
-
-static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
-{
- return __kzalloc(n * size, flags);
-}
-
-#define kmem_cache_shrink(d) (0)
-#define kmem_cache_reap(a)
-#define kmem_ptr_validate(a, b) (0)
-#define kmem_cache_alloc_node(c, f, n) kmem_cache_alloc(c, f)
-#define kmalloc_node(s, f, n) kmalloc(s, f)
-#define kzalloc(s, f) __kzalloc(s, f)
-#define kmalloc_track_caller kmalloc
-
-#define kmalloc_node_track_caller kmalloc_node
-
-#endif /* CONFIG_SLOB */
+#endif /* DEBUG_SLAB */
#endif /* __KERNEL__ */
-
#endif /* _LINUX_SLAB_H */
+
--- /dev/null
+#ifndef _LINUX_SLAB_DEF_H
+#define _LINUX_SLAB_DEF_H
+
+/*
+ * Definitions unique to the original Linux SLAB allocator.
+ *
+ * What we provide here is a way to optimize the frequent kmalloc
+ * calls in the kernel by selecting the appropriate general cache
+ * if kmalloc was called with a size that can be established at
+ * compile time.
+ */
+
+#include <linux/init.h>
+#include <asm/page.h> /* kmalloc_sizes.h needs PAGE_SIZE */
+#include <asm/cache.h> /* kmalloc_sizes.h needs L1_CACHE_BYTES */
+#include <linux/compiler.h>
+
+/* Size description struct for general caches. */
+struct cache_sizes {
+ size_t cs_size;
+ struct kmem_cache *cs_cachep;
+ struct kmem_cache *cs_dmacachep;
+};
+extern struct cache_sizes malloc_sizes[];
+
+static inline void *kmalloc(size_t size, gfp_t flags)
+{
+ if (__builtin_constant_p(size)) {
+ int i = 0;
+#define CACHE(x) \
+ if (size <= x) \
+ goto found; \
+ else \
+ i++;
+#include "kmalloc_sizes.h"
+#undef CACHE
+ {
+ extern void __you_cannot_kmalloc_that_much(void);
+ __you_cannot_kmalloc_that_much();
+ }
+found:
+ return kmem_cache_alloc((flags & GFP_DMA) ?
+ malloc_sizes[i].cs_dmacachep :
+ malloc_sizes[i].cs_cachep, flags);
+ }
+ return __kmalloc(size, flags);
+}
+
+static inline void *kzalloc(size_t size, gfp_t flags)
+{
+ if (__builtin_constant_p(size)) {
+ int i = 0;
+#define CACHE(x) \
+ if (size <= x) \
+ goto found; \
+ else \
+ i++;
+#include "kmalloc_sizes.h"
+#undef CACHE
+ {
+ extern void __you_cannot_kzalloc_that_much(void);
+ __you_cannot_kzalloc_that_much();
+ }
+found:
+ return kmem_cache_zalloc((flags & GFP_DMA) ?
+ malloc_sizes[i].cs_dmacachep :
+ malloc_sizes[i].cs_cachep, flags);
+ }
+ return __kzalloc(size, flags);
+}
+
+#ifdef CONFIG_NUMA
+extern void *__kmalloc_node(size_t size, gfp_t flags, int node);
+
+static inline void *kmalloc_node(size_t size, gfp_t flags, int node)
+{
+ if (__builtin_constant_p(size)) {
+ int i = 0;
+#define CACHE(x) \
+ if (size <= x) \
+ goto found; \
+ else \
+ i++;
+#include "kmalloc_sizes.h"
+#undef CACHE
+ {
+ extern void __you_cannot_kmalloc_that_much(void);
+ __you_cannot_kmalloc_that_much();
+ }
+found:
+ return kmem_cache_alloc_node((flags & GFP_DMA) ?
+ malloc_sizes[i].cs_dmacachep :
+ malloc_sizes[i].cs_cachep, flags, node);
+ }
+ return __kmalloc_node(size, flags, node);
+}
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _LINUX_SLAB_DEF_H */
* generation is incremented.
*/
unsigned int generation;
- pid_t conn_pid;
+ struct pid *conn_pid;
struct smb_conn_opt opt;
wait_queue_head_t conn_wq;
int conn_complete;
* protection - since "write" code only needs to change the head, and
* interrupt code only needs to change the tail.
*/
-typedef struct {
+struct stlrq {
char *buf;
char *head;
char *tail;
-} stlrq_t;
+};
/*
* Port, panel and board structures to hold status info about each.
* is associated with, this makes it (fairly) easy to get back to the
* board/panel info for a port.
*/
-typedef struct stlport {
+struct stlport {
unsigned long magic;
- int portnr;
- int panelnr;
- int brdnr;
+ unsigned int portnr;
+ unsigned int panelnr;
+ unsigned int brdnr;
int ioaddr;
int uartaddr;
- int pagenr;
+ unsigned int pagenr;
long istate;
int flags;
int baud_base;
wait_queue_head_t close_wait;
struct work_struct tqueue;
comstats_t stats;
- stlrq_t tx;
-} stlport_t;
+ struct stlrq tx;
+};
-typedef struct stlpanel {
+struct stlpanel {
unsigned long magic;
- int panelnr;
- int brdnr;
- int pagenr;
- int nrports;
+ unsigned int panelnr;
+ unsigned int brdnr;
+ unsigned int pagenr;
+ unsigned int nrports;
int iobase;
void *uartp;
void (*isr)(struct stlpanel *panelp, unsigned int iobase);
unsigned int hwid;
unsigned int ackmask;
- stlport_t *ports[STL_PORTSPERPANEL];
-} stlpanel_t;
+ struct stlport *ports[STL_PORTSPERPANEL];
+};
-typedef struct stlbrd {
+struct stlbrd {
unsigned long magic;
- int brdnr;
- int brdtype;
- int state;
- int nrpanels;
- int nrports;
- int nrbnks;
+ unsigned int brdnr;
+ unsigned int brdtype;
+ unsigned int state;
+ unsigned int nrpanels;
+ unsigned int nrports;
+ unsigned int nrbnks;
int irq;
int irqtype;
int (*isr)(struct stlbrd *brdp);
unsigned long clk;
unsigned int bnkpageaddr[STL_MAXBANKS];
unsigned int bnkstataddr[STL_MAXBANKS];
- stlpanel_t *bnk2panel[STL_MAXBANKS];
- stlpanel_t *panels[STL_MAXPANELS];
-} stlbrd_t;
+ struct stlpanel *bnk2panel[STL_MAXBANKS];
+ struct stlpanel *panels[STL_MAXPANELS];
+};
/*
** the sysctl() binary interface. Do *NOT* change the
** numbering of any existing values here, and do not change
** any numbers within any one set of values. If you have to
- ** have to redefine an existing interface, use a new number for it.
+ ** redefine an existing interface, use a new number for it.
** The kernel will then return -ENOTDIR to any application using
** the old binary interface.
**
typedef int ctl_handler (ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context);
+ void __user *newval, size_t newlen);
typedef int proc_handler (ctl_table *ctl, int write, struct file * filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
extern int do_sysctl_strategy (ctl_table *table,
int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void ** context);
+ void __user *newval, size_t newlen);
extern ctl_handler sysctl_string;
extern ctl_handler sysctl_intvec;
#ifdef CONFIG_MAGIC_SYSRQ
+extern int sysrq_on(void);
+
+/*
+ * Do not use this one directly:
+ */
+extern int __sysrq_enabled;
+
/* Generic SysRq interface -- you may call it from any device driver, supplying
* ASCII code of the key, pointer to registers and kbd/tty structs (if they
* are available -- else NULL's).
*/
-void handle_sysrq(int, struct tty_struct *);
-void __handle_sysrq(int, struct tty_struct *, int check_mask);
-int register_sysrq_key(int, struct sysrq_key_op *);
-int unregister_sysrq_key(int, struct sysrq_key_op *);
+void handle_sysrq(int key, struct tty_struct *tty);
+void __handle_sysrq(int key, struct tty_struct *tty, int check_mask);
+int register_sysrq_key(int key, struct sysrq_key_op *op);
+int unregister_sysrq_key(int key, struct sysrq_key_op *op);
struct sysrq_key_op *__sysrq_get_key_op(int key);
#else
+static inline int sysrq_on(void)
+{
+ return 0;
+}
static inline int __reterr(void)
{
return -EINVAL;
}
+static inline void handle_sysrq(int key, struct tty_struct *tty)
+{
+}
#define register_sysrq_key(ig,nore) __reterr()
#define unregister_sysrq_key(ig,nore) __reterr()
--- /dev/null
+/*
+ * task_io_accounting: a structure which is used for recording a single task's
+ * IO statistics.
+ *
+ * Don't include this header file directly - it is designed to be dragged in via
+ * sched.h.
+ *
+ * Blame akpm@osdl.org for all this.
+ */
+
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+struct task_io_accounting {
+ /*
+ * The number of bytes which this task has caused to be read from
+ * storage.
+ */
+ u64 read_bytes;
+
+ /*
+ * The number of bytes which this task has caused, or shall cause to be
+ * written to disk.
+ */
+ u64 write_bytes;
+
+ /*
+ * A task can cause "negative" IO too. If this task truncates some
+ * dirty pagecache, some IO which another task has been accounted for
+ * (in its write_bytes) will not be happening. We _could_ just
+ * subtract that from the truncating task's write_bytes, but there is
+ * information loss in doing that.
+ */
+ u64 cancelled_write_bytes;
+};
+#else
+struct task_io_accounting {
+};
+#endif
--- /dev/null
+/*
+ * Task I/O accounting operations
+ */
+#ifndef __TASK_IO_ACCOUNTING_OPS_INCLUDED
+#define __TASK_IO_ACCOUNTING_OPS_INCLUDED
+
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+static inline void task_io_account_read(size_t bytes)
+{
+ current->ioac.read_bytes += bytes;
+}
+
+static inline void task_io_account_write(size_t bytes)
+{
+ current->ioac.write_bytes += bytes;
+}
+
+static inline void task_io_account_cancelled_write(size_t bytes)
+{
+ current->ioac.cancelled_write_bytes += bytes;
+}
+
+static inline void task_io_accounting_init(struct task_struct *tsk)
+{
+ memset(&tsk->ioac, 0, sizeof(tsk->ioac));
+}
+
+#else
+
+static inline void task_io_account_read(size_t bytes)
+{
+}
+
+static inline void task_io_account_write(size_t bytes)
+{
+}
+
+static inline void task_io_account_cancelled_write(size_t bytes)
+{
+}
+
+static inline void task_io_accounting_init(struct task_struct *tsk)
+{
+}
+
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
+#endif /* __TASK_IO_ACCOUNTING_OPS_INCLUDED */
*/
-#define TASKSTATS_VERSION 2
+#define TASKSTATS_VERSION 3
#define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN
* in linux/sched.h */
__u64 ac_majflt; /* Major Page Fault Count */
/* Basic Accounting Fields end */
- /* Extended accounting fields start */
+ /* Extended accounting fields start */
/* Accumulated RSS usage in duration of a task, in MBytes-usecs.
* The current rss usage is added to this counter every time
* a tick is charged to a task's system time. So, at the end we
* will have memory usage multiplied by system time. Thus an
* average usage per system time unit can be calculated.
*/
- __u64 coremem; /* accumulated RSS usage in MB-usec */
+ __u64 coremem; /* accumulated RSS usage in MB-usec */
/* Accumulated virtual memory usage in duration of a task.
* Same as acct_rss_mem1 above except that we keep track of VM usage.
*/
- __u64 virtmem; /* accumulated VM usage in MB-usec */
+ __u64 virtmem; /* accumulated VM usage in MB-usec */
/* High watermark of RSS and virtual memory usage in duration of
* a task, in KBytes.
*/
- __u64 hiwater_rss; /* High-watermark of RSS usage, in KB */
- __u64 hiwater_vm; /* High-water VM usage, in KB */
+ __u64 hiwater_rss; /* High-watermark of RSS usage, in KB */
+ __u64 hiwater_vm; /* High-water VM usage, in KB */
/* The following four fields are I/O statistics of a task. */
- __u64 read_char; /* bytes read */
- __u64 write_char; /* bytes written */
- __u64 read_syscalls; /* read syscalls */
- __u64 write_syscalls; /* write syscalls */
- /* Extended accounting fields end */
+ __u64 read_char; /* bytes read */
+ __u64 write_char; /* bytes written */
+ __u64 read_syscalls; /* read syscalls */
+ __u64 write_syscalls; /* write syscalls */
+ /* Extended accounting fields end */
+
+#define TASKSTATS_HAS_IO_ACCOUNTING
+ /* Per-task storage I/O accounting starts */
+ __u64 read_bytes; /* bytes of read I/O */
+ __u64 write_bytes; /* bytes of write I/O */
+ __u64 cancelled_write_bytes; /* bytes of cancelled write I/O */
};
* @tfrctx_p: current loss event rate (5.4)
* @tfrctx_rto: estimate of RTO, equals 4*RTT (4.3)
* @tfrctx_ipi: inter-packet interval (4.6)
+ *
+ * Note: X and X_recv are both maintained in units of 64 * bytes/second. This
+ * enables a finer resolution of sending rates and avoids problems with
+ * integer arithmetic; u32 is not sufficient as scaling consumes 6 bits.
*/
struct tfrc_tx_info {
- __u32 tfrctx_x;
- __u32 tfrctx_x_recv;
+ __u64 tfrctx_x;
+ __u64 tfrctx_x_recv;
__u32 tfrctx_x_calc;
__u32 tfrctx_rtt;
__u32 tfrctx_p;
struct hrtimer;
extern int it_real_fn(struct hrtimer *);
+unsigned long __round_jiffies(unsigned long j, int cpu);
+unsigned long __round_jiffies_relative(unsigned long j, int cpu);
+unsigned long round_jiffies(unsigned long j);
+unsigned long round_jiffies_relative(unsigned long j);
+
+
#endif
.groups = NULL, \
.min_interval = 1, \
.max_interval = 2, \
- .busy_factor = 8, \
+ .busy_factor = 64, \
.imbalance_pct = 110, \
.cache_nice_tries = 0, \
.per_cpu_gain = 25, \
.wake_idx = 0, /* unused */ \
.forkexec_idx = 0, /* unused */ \
.per_cpu_gain = 100, \
- .flags = SD_LOAD_BALANCE, \
+ .flags = SD_LOAD_BALANCE \
+ | SD_SERIALIZE, \
.last_balance = jiffies, \
.balance_interval = 64, \
.nr_balance_failed = 0, \
int index;
struct tty_ldisc ldisc;
struct mutex termios_mutex;
- struct termios *termios, *termios_locked;
+ struct ktermios *termios, *termios_locked;
char name[64];
int pgrp;
int session;
extern void tty_write_flush(struct tty_struct *);
-extern struct termios tty_std_termios;
+extern struct ktermios tty_std_termios;
extern int kmsg_redirect;
extern void do_SAK(struct tty_struct *tty);
extern void disassociate_ctty(int priv);
extern void tty_flip_buffer_push(struct tty_struct *tty);
-extern int tty_get_baud_rate(struct tty_struct *tty);
-extern int tty_termios_baud_rate(struct termios *termios);
+extern speed_t tty_get_baud_rate(struct tty_struct *tty);
+extern speed_t tty_termios_baud_rate(struct ktermios *termios);
+extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
extern void tty_ldisc_deref(struct tty_ldisc *);
extern int tty_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg);
+extern dev_t tty_devnum(struct tty_struct *tty);
+extern void proc_clear_tty(struct task_struct *p);
+extern void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
+extern void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
+extern struct tty_struct *get_current_tty(void);
+
extern struct mutex tty_mutex;
/* n_tty.c */
extern int vt_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
-static inline dev_t tty_devnum(struct tty_struct *tty)
-{
- return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
-}
-
#endif /* __KERNEL__ */
#endif
* device-specific ioctl's. If the ioctl number passed in cmd
* is not recognized by the driver, it should return ENOIOCTLCMD.
*
- * void (*set_termios)(struct tty_struct *tty, struct termios * old);
+ * void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
*
* This routine allows the tty driver to be notified when
* device's termios settings have changed. Note that a
int (*chars_in_buffer)(struct tty_struct *tty);
int (*ioctl)(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
- void (*set_termios)(struct tty_struct *tty, struct termios * old);
+ void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
void (*throttle)(struct tty_struct * tty);
void (*unthrottle)(struct tty_struct * tty);
void (*stop)(struct tty_struct *tty);
int num; /* number of devices allocated */
short type; /* type of tty driver */
short subtype; /* subtype of tty driver */
- struct termios init_termios; /* Initial termios */
+ struct ktermios init_termios; /* Initial termios */
int flags; /* tty driver flags */
int refcount; /* for loadable tty drivers */
struct proc_dir_entry *proc_entry; /* /proc fs entry */
* Pointer to the tty data structures
*/
struct tty_struct **ttys;
- struct termios **termios;
- struct termios **termios_locked;
+ struct ktermios **termios;
+ struct ktermios **termios_locked;
void *driver_state; /* only used for the PTY driver */
/*
int (*chars_in_buffer)(struct tty_struct *tty);
int (*ioctl)(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
- void (*set_termios)(struct tty_struct *tty, struct termios * old);
+ void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
void (*throttle)(struct tty_struct * tty);
void (*unthrottle)(struct tty_struct * tty);
void (*stop)(struct tty_struct *tty);
* low-level driver can "grab" an ioctl request before the line
* discpline has a chance to see it.
*
- * void (*set_termios)(struct tty_struct *tty, struct termios * old);
+ * void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
*
* This function notifies the line discpline that a change has
* been made to the termios structure.
const unsigned char * buf, size_t nr);
int (*ioctl)(struct tty_struct * tty, struct file * file,
unsigned int cmd, unsigned long arg);
- void (*set_termios)(struct tty_struct *tty, struct termios * old);
+ void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
unsigned int (*poll)(struct tty_struct *, struct file *,
struct poll_table_struct *);
int (*hangup)(struct tty_struct *tty);
int (*write) (struct usb_serial_port *port, const unsigned char *buf, int count);
int (*write_room) (struct usb_serial_port *port);
int (*ioctl) (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
- void (*set_termios) (struct usb_serial_port *port, struct termios * old);
+ void (*set_termios) (struct usb_serial_port *port, struct ktermios * old);
void (*break_ctl) (struct usb_serial_port *port, int break_state);
int (*chars_in_buffer) (struct usb_serial_port *port);
void (*throttle) (struct usb_serial_port *port);
#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y','Y','U','V') /* 16 YUV 4:2:2 */
#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H','I','2','4') /* 8 8-bit color */
#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H','M','1','2') /* 8 YUV 4:2:0 16x16 macroblocks */
+#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R','4','4','4') /* 16 xxxxrrrr ggggbbbb */
/* see http://www.siliconimaging.com/RGB%20Bayer.htm */
#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B','A','8','1') /* 8 BGBG.. GRGR.. */
#define XFRMGRP_EXPIRE 2
#define XFRMGRP_SA 4
#define XFRMGRP_POLICY 8
-#define XFRMGRP_REPORT 0x10
+#define XFRMGRP_REPORT 0x20
#endif
enum xfrm_nlgroups {
extern IR_KEYTAB_TYPE ir_codes_npgtech[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_norwood[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_proteus_2309[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE];
#endif
#define DEB_INT(x) if (0!=(DEBUG_VARIABLE&0x20)) { DEBUG_PROLOG; printk x; } /* interrupt debug messages */
#define DEB_CAP(x) if (0!=(DEBUG_VARIABLE&0x40)) { DEBUG_PROLOG; printk x; } /* capture debug messages */
-#define SAA7146_IER_DISABLE(x,y) \
- saa7146_write(x, IER, saa7146_read(x, IER) & ~(y));
-#define SAA7146_IER_ENABLE(x,y) \
- saa7146_write(x, IER, saa7146_read(x, IER) | (y));
#define SAA7146_ISR_CLEAR(x,y) \
saa7146_write(x, ISR, (y));
#define SAA7146_I2C_BUS_BIT_RATE_80 (0x200)
#define SAA7146_I2C_BUS_BIT_RATE_60 (0x300)
+static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&x->int_slock, flags);
+ saa7146_write(x, IER, saa7146_read(x, IER) & ~y);
+ spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&x->int_slock, flags);
+ saa7146_write(x, IER, saa7146_read(x, IER) | y);
+ spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
#endif
sensitivity. If this setting is 1, then set PORT2 to 1 to
get proper FM reception. */
unsigned int port2_fm_high_sensitivity:1;
+ /* Some Philips tuners use tda9887 cGainNormal to select the FM radio
+ sensitivity. If this setting is 1, e register will use cGainNormal
+ instead of cGainLow. */
+ unsigned int fm_gain_normal:1;
/* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
use Intercarrier mode. If this setting is 1, then the tuner
needs to be set to intercarrier mode. */
#define TDA9887_DEEMPHASIS_75 (3<<16)
#define TDA9887_AUTOMUTE (1<<18)
#define TDA9887_GATING_18 (1<<19)
+#define TDA9887_GAIN_NORMAL (1<<20)
#ifdef __KERNEL__
struct tveeprom {
u32 has_radio;
- u32 has_ir; /* 0: no IR, 1: IR present, 2: unknown */
+ u32 has_ir; /* bit 0: IR receiver present, bit 1: IR transmitter (blaster) present. -1 == unknown */
u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */
u32 tuner_type;
V4L2_IDENT_CX25841 = 241,
V4L2_IDENT_CX25842 = 242,
V4L2_IDENT_CX25843 = 243,
+
+ /* OmniVision sensors - range 250-299 */
+ V4L2_IDENT_OV7670 = 250,
};
/* audio ioctls */
If the frequency is not supported, then -EINVAL is returned. */
#define VIDIOC_INT_S_CRYSTAL_FREQ _IOW ('d', 113, struct v4l2_crystal_freq)
+/* Initialize the sensor registors to some sort of reasonable
+ default values. */
+#define VIDIOC_INT_INIT _IOW ('d', 114, u32)
+
#endif /* V4L2_COMMON_H_ */
/* Video standard functions */
extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs);
+extern char *v4l2_norm_to_name(v4l2_std_id id);
extern int v4l2_video_std_construct(struct v4l2_standard *vs,
int id, char *name);
* This version moves redundant code from video device code to
* the common handler
*/
-struct v4l2_tvnorm {
- char *name;
- v4l2_std_id id;
-
- void *priv_data;
-};
struct video_device
{
int debug; /* Activates debug level*/
/* Video standard vars */
- int tvnormsize; /* Size of tvnorm array */
- v4l2_std_id current_norm; /* Current tvnorm */
- struct v4l2_tvnorm *tvnorms;
+ v4l2_std_id tvnorms; /* Supported tv norms */
+ v4l2_std_id current_norm; /* Current tvnorm */
/* callbacks */
void (*release)(struct video_device *vfd);
/* Standard handling
G_STD and ENUMSTD are handled by videodev.c
*/
- int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id a);
+ int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm);
int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a);
/* Input handling */
extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *);
/* ax25_addr.c */
-extern ax25_address null_ax25_address;
-extern char *ax2asc(char *buf, ax25_address *);
-extern void asc2ax(ax25_address *addr, char *callsign);
-extern int ax25cmp(ax25_address *, ax25_address *);
-extern int ax25digicmp(ax25_digi *, ax25_digi *);
-extern unsigned char *ax25_addr_parse(unsigned char *, int, ax25_address *, ax25_address *, ax25_digi *, int *, int *);
-extern int ax25_addr_build(unsigned char *, ax25_address *, ax25_address *, ax25_digi *, int, int);
-extern int ax25_addr_size(ax25_digi *);
-extern void ax25_digi_invert(ax25_digi *, ax25_digi *);
+extern const ax25_address ax25_bcast;
+extern const ax25_address ax25_defaddr;
+extern const ax25_address null_ax25_address;
+extern char *ax2asc(char *buf, const ax25_address *);
+extern void asc2ax(ax25_address *addr, const char *callsign);
+extern int ax25cmp(const ax25_address *, const ax25_address *);
+extern int ax25digicmp(const ax25_digi *, const ax25_digi *);
+extern const unsigned char *ax25_addr_parse(const unsigned char *, int,
+ ax25_address *, ax25_address *, ax25_digi *, int *, int *);
+extern int ax25_addr_build(unsigned char *, const ax25_address *,
+ const ax25_address *, const ax25_digi *, int, int);
+extern int ax25_addr_size(const ax25_digi *);
+extern void ax25_digi_invert(const ax25_digi *, ax25_digi *);
/* ax25_dev.c */
extern ax25_dev *ax25_dev_list;
struct hci_filter {
unsigned long type_mask;
unsigned long event_mask[2];
- __u16 opcode;
+ __le16 opcode;
};
struct hci_ufilter {
__u32 type_mask;
__u32 event_mask[2];
- __u16 opcode;
+ __le16 opcode;
};
#define HCI_FLT_TYPE_BITS 31
size_t *lenp, loff_t *ppos);
int ipv4_doint_and_flush_strategy(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context);
+ void __user *newval, size_t newlen);
#ifdef CONFIG_PROC_FS
extern int ip_misc_proc_init(void);
#endif
struct fib6_node *parent;
struct fib6_node *left;
struct fib6_node *right;
-
+#ifdef CONFIG_IPV6_SUBTREES
struct fib6_node *subtree;
-
+#endif
struct rt6_info *leaf;
__u16 fn_bit; /* bit key */
extern int ircomm_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
extern void ircomm_tty_set_termios(struct tty_struct *tty,
- struct termios *old_termios);
+ struct ktermios *old_termios);
extern hashbin_t *ircomm_tty;
#endif
return 0;
}
+static inline int neigh_hh_output(struct hh_cache *hh, struct sk_buff *skb)
+{
+ unsigned seq;
+ int hh_len;
+
+ do {
+ int hh_alen;
+
+ seq = read_seqbegin(&hh->hh_lock);
+ hh_len = hh->hh_len;
+ hh_alen = HH_DATA_ALIGN(hh_len);
+ memcpy(skb->data - hh_alen, hh->hh_data, hh_alen);
+ } while (read_seqretry(&hh->hh_lock, seq));
+
+ skb_push(skb, hh_len);
+ return hh->hh_output(skb);
+}
+
static inline struct neighbour *
__neigh_lookup(struct neigh_table *tbl, const void *pkey, struct net_device *dev, int creat)
{
return (ct != NULL);
}
+static inline int nf_ct_l3proto_try_module_get(unsigned short l3proto)
+{
+ need_conntrack();
+ return l3proto == PF_INET ? 0 : -1;
+}
+
+static inline void nf_ct_l3proto_module_put(unsigned short l3proto)
+{
+}
+
#else /* CONFIG_IP_NF_CONNTRACK */
#include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
static inline void sctp_sysctl_unregister(void) { return; }
static inline int sctp_sysctl_jiffies_ms(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context) {
+ void __user *newval, size_t newlen) {
return -ENOSYS;
}
#endif
struct sctp_bind_hashbucket *port_hashtable;
/* This is the global local address list.
- * We actively maintain this complete list of interfaces on
- * the system by catching routing events.
+ * We actively maintain this complete list of addresses on
+ * the system by catching address add/delete events.
*
* It is a list of sctp_sockaddr_entry.
*/
struct list_head local_addr_list;
- spinlock_t local_addr_lock;
/* Flag to indicate if addip is enabled. */
int addip_enable;
#define sctp_port_alloc_lock (sctp_globals.port_alloc_lock)
#define sctp_port_hashtable (sctp_globals.port_hashtable)
#define sctp_local_addr_list (sctp_globals.local_addr_list)
-#define sctp_local_addr_lock (sctp_globals.local_addr_lock)
#define sctp_addip_enable (sctp_globals.addip_enable)
#define sctp_prsctp_enable (sctp_globals.prsctp_enable)
__u16 default_flags;
__u32 default_context;
__u32 default_timetolive;
+ __u32 default_rcv_context;
/* Heartbeat interval: The endpoint sends out a Heartbeat chunk to
* the destination address every heartbeat interval. This value
__u32 default_context;
__u32 default_timetolive;
+ /* Default receive parameters */
+ __u32 default_rcv_context;
+
/* This tracks outbound ssn for a given stream. */
struct sctp_ssnmap *ssnmap;
#define SCTP_GET_PEER_ADDR_INFO SCTP_GET_PEER_ADDR_INFO
SCTP_DELAYED_ACK_TIME,
#define SCTP_DELAYED_ACK_TIME SCTP_DELAYED_ACK_TIME
+ SCTP_CONTEXT, /* Receive Context */
+#define SCTP_CONTEXT SCTP_CONTEXT
/* Internal Socket Options. Some of the sctp library functions are
* implemented using these socket options.
/*
- * Copyright (c) 2005 Intel Corporation. All rights reserved.
+ * Copyright (c) 2005-2006 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
struct ib_qp_attr *src);
+void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
+ struct ib_ah_attr *src);
+
void ib_copy_path_rec_to_user(struct ib_user_path_rec *dst,
struct ib_sa_path_rec *src);
#include <linux/types.h>
#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <asm/atomic.h>
#include <asm/scatterlist.h>
u8 *lmc_cache;
};
+struct ib_dma_mapping_ops {
+ int (*mapping_error)(struct ib_device *dev,
+ u64 dma_addr);
+ u64 (*map_single)(struct ib_device *dev,
+ void *ptr, size_t size,
+ enum dma_data_direction direction);
+ void (*unmap_single)(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction);
+ u64 (*map_page)(struct ib_device *dev,
+ struct page *page, unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction);
+ void (*unmap_page)(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction);
+ int (*map_sg)(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction);
+ void (*unmap_sg)(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction);
+ u64 (*dma_address)(struct ib_device *dev,
+ struct scatterlist *sg);
+ unsigned int (*dma_len)(struct ib_device *dev,
+ struct scatterlist *sg);
+ void (*sync_single_for_cpu)(struct ib_device *dev,
+ u64 dma_handle,
+ size_t size,
+ enum dma_data_direction dir);
+ void (*sync_single_for_device)(struct ib_device *dev,
+ u64 dma_handle,
+ size_t size,
+ enum dma_data_direction dir);
+ void *(*alloc_coherent)(struct ib_device *dev,
+ size_t size,
+ u64 *dma_handle,
+ gfp_t flag);
+ void (*free_coherent)(struct ib_device *dev,
+ size_t size, void *cpu_addr,
+ u64 dma_handle);
+};
+
struct iw_cm_verbs;
struct ib_device {
struct ib_mad *in_mad,
struct ib_mad *out_mad);
+ struct ib_dma_mapping_ops *dma_ops;
+
struct module *owner;
struct class_device class_dev;
struct kobject ports_parent;
* usable for DMA.
* @pd: The protection domain associated with the memory region.
* @mr_access_flags: Specifies the memory access rights.
+ *
+ * Note that the ib_dma_*() functions defined below must be used
+ * to create/destroy addresses used with the Lkey or Rkey returned
+ * by ib_get_dma_mr().
*/
struct ib_mr *ib_get_dma_mr(struct ib_pd *pd, int mr_access_flags);
/**
+ * ib_dma_mapping_error - check a DMA addr for error
+ * @dev: The device for which the dma_addr was created
+ * @dma_addr: The DMA address to check
+ */
+static inline int ib_dma_mapping_error(struct ib_device *dev, u64 dma_addr)
+{
+ if (dev->dma_ops)
+ return dev->dma_ops->mapping_error(dev, dma_addr);
+ return dma_mapping_error(dma_addr);
+}
+
+/**
+ * ib_dma_map_single - Map a kernel virtual address to DMA address
+ * @dev: The device for which the dma_addr is to be created
+ * @cpu_addr: The kernel virtual address
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline u64 ib_dma_map_single(struct ib_device *dev,
+ void *cpu_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ if (dev->dma_ops)
+ return dev->dma_ops->map_single(dev, cpu_addr, size, direction);
+ return dma_map_single(dev->dma_device, cpu_addr, size, direction);
+}
+
+/**
+ * ib_dma_unmap_single - Destroy a mapping created by ib_dma_map_single()
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline void ib_dma_unmap_single(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ if (dev->dma_ops)
+ dev->dma_ops->unmap_single(dev, addr, size, direction);
+ else
+ dma_unmap_single(dev->dma_device, addr, size, direction);
+}
+
+/**
+ * ib_dma_map_page - Map a physical page to DMA address
+ * @dev: The device for which the dma_addr is to be created
+ * @page: The page to be mapped
+ * @offset: The offset within the page
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline u64 ib_dma_map_page(struct ib_device *dev,
+ struct page *page,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ if (dev->dma_ops)
+ return dev->dma_ops->map_page(dev, page, offset, size, direction);
+ return dma_map_page(dev->dma_device, page, offset, size, direction);
+}
+
+/**
+ * ib_dma_unmap_page - Destroy a mapping created by ib_dma_map_page()
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline void ib_dma_unmap_page(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ if (dev->dma_ops)
+ dev->dma_ops->unmap_page(dev, addr, size, direction);
+ else
+ dma_unmap_page(dev->dma_device, addr, size, direction);
+}
+
+/**
+ * ib_dma_map_sg - Map a scatter/gather list to DMA addresses
+ * @dev: The device for which the DMA addresses are to be created
+ * @sg: The array of scatter/gather entries
+ * @nents: The number of scatter/gather entries
+ * @direction: The direction of the DMA
+ */
+static inline int ib_dma_map_sg(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ if (dev->dma_ops)
+ return dev->dma_ops->map_sg(dev, sg, nents, direction);
+ return dma_map_sg(dev->dma_device, sg, nents, direction);
+}
+
+/**
+ * ib_dma_unmap_sg - Unmap a scatter/gather list of DMA addresses
+ * @dev: The device for which the DMA addresses were created
+ * @sg: The array of scatter/gather entries
+ * @nents: The number of scatter/gather entries
+ * @direction: The direction of the DMA
+ */
+static inline void ib_dma_unmap_sg(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ if (dev->dma_ops)
+ dev->dma_ops->unmap_sg(dev, sg, nents, direction);
+ else
+ dma_unmap_sg(dev->dma_device, sg, nents, direction);
+}
+
+/**
+ * ib_sg_dma_address - Return the DMA address from a scatter/gather entry
+ * @dev: The device for which the DMA addresses were created
+ * @sg: The scatter/gather entry
+ */
+static inline u64 ib_sg_dma_address(struct ib_device *dev,
+ struct scatterlist *sg)
+{
+ if (dev->dma_ops)
+ return dev->dma_ops->dma_address(dev, sg);
+ return sg_dma_address(sg);
+}
+
+/**
+ * ib_sg_dma_len - Return the DMA length from a scatter/gather entry
+ * @dev: The device for which the DMA addresses were created
+ * @sg: The scatter/gather entry
+ */
+static inline unsigned int ib_sg_dma_len(struct ib_device *dev,
+ struct scatterlist *sg)
+{
+ if (dev->dma_ops)
+ return dev->dma_ops->dma_len(dev, sg);
+ return sg_dma_len(sg);
+}
+
+/**
+ * ib_dma_sync_single_for_cpu - Prepare DMA region to be accessed by CPU
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @dir: The direction of the DMA
+ */
+static inline void ib_dma_sync_single_for_cpu(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ if (dev->dma_ops)
+ dev->dma_ops->sync_single_for_cpu(dev, addr, size, dir);
+ else
+ dma_sync_single_for_cpu(dev->dma_device, addr, size, dir);
+}
+
+/**
+ * ib_dma_sync_single_for_device - Prepare DMA region to be accessed by device
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @dir: The direction of the DMA
+ */
+static inline void ib_dma_sync_single_for_device(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ if (dev->dma_ops)
+ dev->dma_ops->sync_single_for_device(dev, addr, size, dir);
+ else
+ dma_sync_single_for_device(dev->dma_device, addr, size, dir);
+}
+
+/**
+ * ib_dma_alloc_coherent - Allocate memory and map it for DMA
+ * @dev: The device for which the DMA address is requested
+ * @size: The size of the region to allocate in bytes
+ * @dma_handle: A pointer for returning the DMA address of the region
+ * @flag: memory allocator flags
+ */
+static inline void *ib_dma_alloc_coherent(struct ib_device *dev,
+ size_t size,
+ u64 *dma_handle,
+ gfp_t flag)
+{
+ if (dev->dma_ops)
+ return dev->dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+ return dma_alloc_coherent(dev->dma_device, size, dma_handle, flag);
+}
+
+/**
+ * ib_dma_free_coherent - Free memory allocated by ib_dma_alloc_coherent()
+ * @dev: The device for which the DMA addresses were allocated
+ * @size: The size of the region
+ * @cpu_addr: the address returned by ib_dma_alloc_coherent()
+ * @dma_handle: the DMA address returned by ib_dma_alloc_coherent()
+ */
+static inline void ib_dma_free_coherent(struct ib_device *dev,
+ size_t size, void *cpu_addr,
+ u64 dma_handle)
+{
+ if (dev->dma_ops)
+ dev->dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+ else
+ dma_free_coherent(dev->dma_device, size, cpu_addr, dma_handle);
+}
+
+/**
* ib_reg_phys_mr - Prepares a virtually addressed memory region for use
* by an HCA.
* @pd: The protection domain associated assigned to the registered region.
int num_paths;
};
+struct rdma_conn_param {
+ const void *private_data;
+ u8 private_data_len;
+ u8 responder_resources;
+ u8 initiator_depth;
+ u8 flow_control;
+ u8 retry_count; /* ignored when accepting */
+ u8 rnr_retry_count;
+ /* Fields below ignored if a QP is created on the rdma_cm_id. */
+ u8 srq;
+ u32 qp_num;
+};
+
+struct rdma_ud_param {
+ const void *private_data;
+ u8 private_data_len;
+ struct ib_ah_attr ah_attr;
+ u32 qp_num;
+ u32 qkey;
+};
+
struct rdma_cm_event {
enum rdma_cm_event_type event;
int status;
- void *private_data;
- u8 private_data_len;
+ union {
+ struct rdma_conn_param conn;
+ struct rdma_ud_param ud;
+ } param;
};
struct rdma_cm_id;
int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr,
int *qp_attr_mask);
-struct rdma_conn_param {
- const void *private_data;
- u8 private_data_len;
- u8 responder_resources;
- u8 initiator_depth;
- u8 flow_control;
- u8 retry_count; /* ignored when accepting */
- u8 rnr_retry_count;
- /* Fields below ignored if a QP is created on the rdma_cm_id. */
- u8 srq;
- u32 qp_num;
- enum ib_qp_type qp_type;
-};
-
/**
* rdma_connect - Initiate an active connection request.
+ * @id: Connection identifier to connect.
+ * @conn_param: Connection information used for connected QPs.
*
* Users must have resolved a route for the rdma_cm_id to connect with
* by having called rdma_resolve_route before calling this routine.
+ *
+ * This call will either connect to a remote QP or obtain remote QP
+ * information for unconnected rdma_cm_id's. The actual operation is
+ * based on the rdma_cm_id's port space.
*/
int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
/**
+ * rdma_notify - Notifies the RDMA CM of an asynchronous event that has
+ * occurred on the connection.
+ * @id: Connection identifier to transition to established.
+ * @event: Asynchronous event.
+ *
+ * This routine should be invoked by users to notify the CM of relevant
+ * communication events. Events that should be reported to the CM and
+ * when to report them are:
+ *
+ * IB_EVENT_COMM_EST - Used when a message is received on a connected
+ * QP before an RTU has been received.
+ */
+int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event);
+
+/**
* rdma_reject - Called to reject a connection request or response.
*/
int rdma_reject(struct rdma_cm_id *id, const void *private_data,
int rdma_set_ib_paths(struct rdma_cm_id *id,
struct ib_sa_path_rec *path_rec, int num_paths);
+/* Global qkey for UD QPs and multicast groups. */
+#define RDMA_UD_QKEY 0x01234567
+
#endif /* RDMA_CM_IB_H */
--- /dev/null
+/*
+ * Copyright (c) 2005-2006 Intel Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef RDMA_USER_CM_H
+#define RDMA_USER_CM_H
+
+#include <linux/types.h>
+#include <linux/in6.h>
+#include <rdma/ib_user_verbs.h>
+#include <rdma/ib_user_sa.h>
+
+#define RDMA_USER_CM_ABI_VERSION 3
+
+#define RDMA_MAX_PRIVATE_DATA 256
+
+enum {
+ RDMA_USER_CM_CMD_CREATE_ID,
+ RDMA_USER_CM_CMD_DESTROY_ID,
+ RDMA_USER_CM_CMD_BIND_ADDR,
+ RDMA_USER_CM_CMD_RESOLVE_ADDR,
+ RDMA_USER_CM_CMD_RESOLVE_ROUTE,
+ RDMA_USER_CM_CMD_QUERY_ROUTE,
+ RDMA_USER_CM_CMD_CONNECT,
+ RDMA_USER_CM_CMD_LISTEN,
+ RDMA_USER_CM_CMD_ACCEPT,
+ RDMA_USER_CM_CMD_REJECT,
+ RDMA_USER_CM_CMD_DISCONNECT,
+ RDMA_USER_CM_CMD_INIT_QP_ATTR,
+ RDMA_USER_CM_CMD_GET_EVENT,
+ RDMA_USER_CM_CMD_GET_OPTION,
+ RDMA_USER_CM_CMD_SET_OPTION,
+ RDMA_USER_CM_CMD_NOTIFY
+};
+
+/*
+ * command ABI structures.
+ */
+struct rdma_ucm_cmd_hdr {
+ __u32 cmd;
+ __u16 in;
+ __u16 out;
+};
+
+struct rdma_ucm_create_id {
+ __u64 uid;
+ __u64 response;
+ __u16 ps;
+ __u8 reserved[6];
+};
+
+struct rdma_ucm_create_id_resp {
+ __u32 id;
+};
+
+struct rdma_ucm_destroy_id {
+ __u64 response;
+ __u32 id;
+ __u32 reserved;
+};
+
+struct rdma_ucm_destroy_id_resp {
+ __u32 events_reported;
+};
+
+struct rdma_ucm_bind_addr {
+ __u64 response;
+ struct sockaddr_in6 addr;
+ __u32 id;
+};
+
+struct rdma_ucm_resolve_addr {
+ struct sockaddr_in6 src_addr;
+ struct sockaddr_in6 dst_addr;
+ __u32 id;
+ __u32 timeout_ms;
+};
+
+struct rdma_ucm_resolve_route {
+ __u32 id;
+ __u32 timeout_ms;
+};
+
+struct rdma_ucm_query_route {
+ __u64 response;
+ __u32 id;
+ __u32 reserved;
+};
+
+struct rdma_ucm_query_route_resp {
+ __u64 node_guid;
+ struct ib_user_path_rec ib_route[2];
+ struct sockaddr_in6 src_addr;
+ struct sockaddr_in6 dst_addr;
+ __u32 num_paths;
+ __u8 port_num;
+ __u8 reserved[3];
+};
+
+struct rdma_ucm_conn_param {
+ __u32 qp_num;
+ __u32 reserved;
+ __u8 private_data[RDMA_MAX_PRIVATE_DATA];
+ __u8 private_data_len;
+ __u8 srq;
+ __u8 responder_resources;
+ __u8 initiator_depth;
+ __u8 flow_control;
+ __u8 retry_count;
+ __u8 rnr_retry_count;
+ __u8 valid;
+};
+
+struct rdma_ucm_ud_param {
+ __u32 qp_num;
+ __u32 qkey;
+ struct ib_uverbs_ah_attr ah_attr;
+ __u8 private_data[RDMA_MAX_PRIVATE_DATA];
+ __u8 private_data_len;
+ __u8 reserved[7];
+};
+
+struct rdma_ucm_connect {
+ struct rdma_ucm_conn_param conn_param;
+ __u32 id;
+ __u32 reserved;
+};
+
+struct rdma_ucm_listen {
+ __u32 id;
+ __u32 backlog;
+};
+
+struct rdma_ucm_accept {
+ __u64 uid;
+ struct rdma_ucm_conn_param conn_param;
+ __u32 id;
+ __u32 reserved;
+};
+
+struct rdma_ucm_reject {
+ __u32 id;
+ __u8 private_data_len;
+ __u8 reserved[3];
+ __u8 private_data[RDMA_MAX_PRIVATE_DATA];
+};
+
+struct rdma_ucm_disconnect {
+ __u32 id;
+};
+
+struct rdma_ucm_init_qp_attr {
+ __u64 response;
+ __u32 id;
+ __u32 qp_state;
+};
+
+struct rdma_ucm_notify {
+ __u32 id;
+ __u32 event;
+};
+
+struct rdma_ucm_get_event {
+ __u64 response;
+};
+
+struct rdma_ucm_event_resp {
+ __u64 uid;
+ __u32 id;
+ __u32 event;
+ __u32 status;
+ union {
+ struct rdma_ucm_conn_param conn;
+ struct rdma_ucm_ud_param ud;
+ } param;
+};
+
+#endif /* RDMA_USER_CM_H */
#ifndef __MBX_FB_H
#define __MBX_FB_H
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
struct mbxfb_val {
unsigned int defval;
unsigned int min;
int (*remove)(struct fb_info *fb);
};
+/* planar */
+#define MBXFB_FMT_YUV12 0
+
+/* packed */
+#define MBXFB_FMT_UY0VY1 1
+#define MBXFB_FMT_VY0UY1 2
+#define MBXFB_FMT_Y0UY1V 3
+#define MBXFB_FMT_Y0VY1U 4
+struct mbxfb_overlaySetup {
+ __u32 enable;
+ __u32 x, y;
+ __u32 width, height;
+ __u32 alpha;
+ __u32 fmt;
+ __u32 mem_offset;
+ __u32 scaled_width;
+ __u32 scaled_height;
+
+ /* Filled by the driver */
+ __u32 U_offset;
+ __u32 V_offset;
+
+ __u16 Y_stride;
+ __u16 UV_stride;
+};
+
+#define MBXFB_IOCX_OVERLAY _IOWR(0xF4, 0x00,struct mbxfb_overlaySetup)
+
#endif /* __MBX_FB_H */
#define PM3FBDestReadModeOr 0xac98
#define PM3FBDestReadMode_ReadDisable 0<<0
#define PM3FBDestReadMode_ReadEnable 1<<0
- #define PM3FBDestReadMode_StripePitch(sp) (((sp)&0x7)<<2
- #define PM3FBDestReadMode_StripeHeight(sh) (((sh)&0x7)<<7
+ #define PM3FBDestReadMode_StripePitch(sp) (((sp)&0x7)<<2)
+ #define PM3FBDestReadMode_StripeHeight(sh) (((sh)&0x7)<<7)
#define PM3FBDestReadMode_Enable0 1<<8
#define PM3FBDestReadMode_Enable1 1<<9
#define PM3FBDestReadMode_Enable2 1<<10
#define PM3FBDestReadMode_Enable3 1<<11
- #define PM3FBDestReadMode_Layout0(l) (((l)&0x3)<<12
- #define PM3FBDestReadMode_Layout1(l) (((l)&0x3)<<14
- #define PM3FBDestReadMode_Layout2(l) (((l)&0x3)<<16
- #define PM3FBDestReadMode_Layout3(l) (((l)&0x3)<<18
+ #define PM3FBDestReadMode_Layout0(l) (((l)&0x3)<<12)
+ #define PM3FBDestReadMode_Layout1(l) (((l)&0x3)<<14)
+ #define PM3FBDestReadMode_Layout2(l) (((l)&0x3)<<16)
+ #define PM3FBDestReadMode_Layout3(l) (((l)&0x3)<<18)
#define PM3FBDestReadMode_Origin0 1<<20
#define PM3FBDestReadMode_Origin1 1<<21
#define PM3FBDestReadMode_Origin2 1<<22
#define PM3FBSourceReadModeOr 0xaca8
#define PM3FBSourceReadMode_ReadDisable (0<<0)
#define PM3FBSourceReadMode_ReadEnable (1<<0)
- #define PM3FBSourceReadMode_StripePitch(sp) (((sp)&0x7)<<2
- #define PM3FBSourceReadMode_StripeHeight(sh) (((sh)&0x7)<<7
- #define PM3FBSourceReadMode_Layout(l) (((l)&0x3)<<8
+ #define PM3FBSourceReadMode_StripePitch(sp) (((sp)&0x7)<<2)
+ #define PM3FBSourceReadMode_StripeHeight(sh) (((sh)&0x7)<<7)
+ #define PM3FBSourceReadMode_Layout(l) (((l)&0x3)<<8)
#define PM3FBSourceReadMode_Origin 1<<10
#define PM3FBSourceReadMode_Blocking 1<<11
#define PM3FBSourceReadMode_UserTexelCoord 1<<13
#define PM3FBSourceReadMode_WrapXEnable 1<<14
#define PM3FBSourceReadMode_WrapYEnable 1<<15
- #define PM3FBSourceReadMode_WrapX(w) (((w)&0xf)<<16
- #define PM3FBSourceReadMode_WrapY(w) (((w)&0xf)<<20
+ #define PM3FBSourceReadMode_WrapX(w) (((w)&0xf)<<16)
+ #define PM3FBSourceReadMode_WrapY(w) (((w)&0xf)<<20)
#define PM3FBSourceReadMode_ExternalSourceData 1<<24
#define PM3FBWriteBufferAddr0 0xb000
#define PM3FBWriteBufferAddr1 0xb008
#define PM3Window 0x8980
#define PM3Window_ForceLBUpdate 1<<3
#define PM3Window_LBUpdateSource 1<<4
- #define PM3Window_FrameCount(c) (((c)&0xff)<<9
+ #define PM3Window_FrameCount(c) (((c)&0xff)<<9)
#define PM3Window_StencilFCP 1<<17
#define PM3Window_DepthFCP 1<<18
#define PM3Window_OverrideWriteFiltering 1<<19
#define BACKPORCH 0x0208
#define VIDEODIMENSIONS 0x020c
#define FBIINIT0 0x0210 /* misc+fifo controls */
-# define EN_VGA_PASSTHROUGH BIT(0)
+# define DIS_VGA_PASSTHROUGH BIT(0)
# define FBI_RESET BIT(1)
# define FIFO_RESET BIT(2)
#define FBIINIT1 0x0214 /* PCI + video controls */
# define DACREG_ICS_CLK1_A 0 /* bit4 */
/* sst default init registers */
-#define FBIINIT0_DEFAULT EN_VGA_PASSTHROUGH
+#define FBIINIT0_DEFAULT DIS_VGA_PASSTHROUGH
#define FBIINIT1_DEFAULT \
( \
*
*/
+/* ioctl to enable/disable VGA passthrough */
+#define SSTFB_SET_VGAPASS _IOW('F', 0xdd, __u32)
+#define SSTFB_GET_VGAPASS _IOR('F', 0xdd, __u32)
+
+
/* used to know witch clock to set */
enum {
VID_CLOCK=0,
};
struct dac_switch {
- char * name;
+ const char *name;
int (*detect) (struct fb_info *info);
int (*set_pll) (struct fb_info *info, const struct pll_timing *t, const int clock);
void (*set_vidmod) (struct fb_info *info, const int bpp);
struct pci_dev *dev;
int type;
u8 revision;
- int gfx_clock; /* status */
+ u8 vgapass; /* VGA pass through: 1=enabled, 0=disabled */
};
#endif /* _SSTFB_H_ */
Say N if unsure.
+config TASK_IO_ACCOUNTING
+ bool "Enable per-task storage I/O accounting (EXPERIMENTAL)"
+ depends on TASK_XACCT
+ help
+ Collect information on the number of bytes of storage I/O which this
+ task has caused.
+
+ Say N if unsure.
+
config SYSCTL
bool
If unsure say Y here.
config KALLSYMS
- bool "Load all symbols for debugging/kksymoops" if EMBEDDED
+ bool "Load all symbols for debugging/ksymoops" if EMBEDDED
default y
help
Say Y here to let the kernel print out symbolic crash information and
# dependencies on generated files need to be listed explicitly
+$(obj)/main.o: include/linux/compile.h
$(obj)/version.o: include/linux/compile.h
# compile.h changes depending on hostname, generation number, etc,
#endif
-void __init populate_rootfs(void)
+static int __init populate_rootfs(void)
{
char *err = unpack_to_rootfs(__initramfs_start,
__initramfs_end - __initramfs_start, 0);
unpack_to_rootfs((char *)initrd_start,
initrd_end - initrd_start, 0);
free_initrd();
- return;
+ return 0;
}
printk("it isn't (%s); looks like an initrd\n", err);
fd = sys_open("/initrd.image", O_WRONLY|O_CREAT, 0700);
#endif
}
#endif
+ return 0;
}
+rootfs_initcall(populate_rootfs);
#include <linux/buffer_head.h>
#include <linux/debug_locks.h>
#include <linux/lockdep.h>
+#include <linux/utsrelease.h>
+#include <linux/pid_namespace.h>
+#include <linux/compile.h>
#include <asm/io.h>
#include <asm/bugs.h>
extern void prio_tree_init(void);
extern void radix_tree_init(void);
extern void free_initmem(void);
-extern void populate_rootfs(void);
extern void driver_init(void);
extern void prepare_namespace(void);
#ifdef CONFIG_ACPI
{
}
+static const char linux_banner[] =
+ "Linux version " UTS_RELEASE
+ " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ")"
+ " (" LINUX_COMPILER ")"
+ " " UTS_VERSION "\n";
+
asmlinkage void __init start_kernel(void)
{
char * command_line;
}
__setup("initcall_debug", initcall_debug_setup);
-struct task_struct *child_reaper = &init_task;
-
extern initcall_t __initcall_start[], __initcall_end[];
static void __init do_initcalls(void)
* assumptions about where in the task array this
* can be found.
*/
- child_reaper = current;
+ init_pid_ns.child_reaper = current;
cad_pid = task_pid(current);
cpuset_init_smp();
- /*
- * Do this before initcalls, because some drivers want to access
- * firmware files.
- */
- populate_rootfs();
-
do_basic_setup();
/*
},
};
EXPORT_SYMBOL_GPL(init_uts_ns);
-
-const char linux_banner[] =
- "Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@"
- LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n";
static ssize_t mqueue_read_file(struct file *filp, char __user *u_data,
size_t count, loff_t * off)
{
- struct mqueue_inode_info *info = MQUEUE_I(filp->f_dentry->d_inode);
+ struct mqueue_inode_info *info = MQUEUE_I(filp->f_path.dentry->d_inode);
char buffer[FILENT_SIZE];
size_t slen;
loff_t o;
return -EFAULT;
*off = o + count;
- filp->f_dentry->d_inode->i_atime = filp->f_dentry->d_inode->i_ctime = CURRENT_TIME;
+ filp->f_path.dentry->d_inode->i_atime = filp->f_path.dentry->d_inode->i_ctime = CURRENT_TIME;
return count;
}
static int mqueue_flush_file(struct file *filp, fl_owner_t id)
{
- struct mqueue_inode_info *info = MQUEUE_I(filp->f_dentry->d_inode);
+ struct mqueue_inode_info *info = MQUEUE_I(filp->f_path.dentry->d_inode);
spin_lock(&info->lock);
if (task_tgid(current) == info->notify_owner)
static unsigned int mqueue_poll_file(struct file *filp, struct poll_table_struct *poll_tab)
{
- struct mqueue_inode_info *info = MQUEUE_I(filp->f_dentry->d_inode);
+ struct mqueue_inode_info *info = MQUEUE_I(filp->f_path.dentry->d_inode);
int retval = 0;
poll_wait(filp, &info->wait_q, poll_tab);
if (unlikely(!filp))
goto out;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
if (unlikely(filp->f_op != &mqueue_file_operations))
goto out_fput;
info = MQUEUE_I(inode);
if (unlikely(!filp))
goto out;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
if (unlikely(filp->f_op != &mqueue_file_operations))
goto out_fput;
info = MQUEUE_I(inode);
if (!filp)
goto out;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
if (unlikely(filp->f_op != &mqueue_file_operations))
goto out_fput;
info = MQUEUE_I(inode);
if (!filp)
goto out;
- inode = filp->f_dentry->d_inode;
+ inode = filp->f_path.dentry->d_inode;
if (unlikely(filp->f_op != &mqueue_file_operations))
goto out_fput;
info = MQUEUE_I(inode);
if (alen > DATALEN_MSG)
alen = DATALEN_MSG;
- msg = (struct msg_msg *)kmalloc(sizeof(*msg) + alen, GFP_KERNEL);
+ msg = kmalloc(sizeof(*msg) + alen, GFP_KERNEL);
if (msg == NULL)
return ERR_PTR(-ENOMEM);
alen = len;
if (alen > DATALEN_SEG)
alen = DATALEN_SEG;
- seg = (struct msg_msgseg *)kmalloc(sizeof(*seg) + alen,
+ seg = kmalloc(sizeof(*seg) + alen,
GFP_KERNEL);
if (seg == NULL) {
err = -ENOMEM;
static void shm_open(struct vm_area_struct *shmd)
{
shm_inc(shm_file_ns(shmd->vm_file),
- shmd->vm_file->f_dentry->d_inode->i_ino);
+ shmd->vm_file->f_path.dentry->d_inode->i_ino);
}
/*
if (!is_file_hugepages(shp->shm_file))
shmem_lock(shp->shm_file, 0, shp->mlock_user);
else
- user_shm_unlock(shp->shm_file->f_dentry->d_inode->i_size,
+ user_shm_unlock(shp->shm_file->f_path.dentry->d_inode->i_size,
shp->mlock_user);
fput (shp->shm_file);
security_shm_free(shp);
static void shm_close (struct vm_area_struct *shmd)
{
struct file * file = shmd->vm_file;
- int id = file->f_dentry->d_inode->i_ino;
+ int id = file->f_path.dentry->d_inode->i_ino;
struct shmid_kernel *shp;
struct ipc_namespace *ns;
vma->vm_ops = &shm_vm_ops;
if (!(vma->vm_flags & VM_WRITE))
vma->vm_flags &= ~VM_MAYWRITE;
- shm_inc(shm_file_ns(file), file->f_dentry->d_inode->i_ino);
+ shm_inc(shm_file_ns(file), file->f_path.dentry->d_inode->i_ino);
}
return ret;
shp->shm_nattch = 0;
shp->id = shm_buildid(ns, id, shp->shm_perm.seq);
shp->shm_file = file;
- file->f_dentry->d_inode->i_ino = shp->id;
+ file->f_path.dentry->d_inode->i_ino = shp->id;
shm_file_ns(file) = get_ipc_ns(ns);
if(!shp)
continue;
- inode = shp->shm_file->f_dentry->d_inode;
+ inode = shp->shm_file->f_path.dentry->d_inode;
if (is_file_hugepages(shp->shm_file)) {
struct address_space *mapping = inode->i_mapping;
}
file = shp->shm_file;
- size = i_size_read(file->f_dentry->d_inode);
+ size = i_size_read(file->f_path.dentry->d_inode);
shp->shm_nattch++;
shm_unlock(shp);
(vma->vm_start - addr)/PAGE_SIZE == vma->vm_pgoff) {
- size = vma->vm_file->f_dentry->d_inode->i_size;
+ size = vma->vm_file->f_path.dentry->d_inode->i_size;
do_munmap(mm, vma->vm_start, vma->vm_end - vma->vm_start);
/*
* We discovered the size of the shm segment, so
spin_unlock(&acct_globals.lock);
/* May block */
- if (vfs_statfs(file->f_dentry, &sbuf))
+ if (vfs_statfs(file->f_path.dentry, &sbuf))
return res;
suspend = sbuf.f_blocks * SUSPEND;
resume = sbuf.f_blocks * RESUME;
add_timer(&acct_globals.timer);
}
if (old_acct) {
- mnt_unpin(old_acct->f_vfsmnt);
+ mnt_unpin(old_acct->f_path.mnt);
spin_unlock(&acct_globals.lock);
do_acct_process(old_acct);
filp_close(old_acct, NULL);
if (IS_ERR(file))
return PTR_ERR(file);
- if (!S_ISREG(file->f_dentry->d_inode->i_mode)) {
+ if (!S_ISREG(file->f_path.dentry->d_inode->i_mode)) {
filp_close(file, NULL);
return -EACCES;
}
}
spin_lock(&acct_globals.lock);
- mnt_pin(file->f_vfsmnt);
+ mnt_pin(file->f_path.mnt);
acct_file_reopen(file);
spin_unlock(&acct_globals.lock);
- mntput(file->f_vfsmnt); /* it's pinned, now give up active reference */
+ mntput(file->f_path.mnt); /* it's pinned, now give up active reference */
return 0;
}
void acct_auto_close_mnt(struct vfsmount *m)
{
spin_lock(&acct_globals.lock);
- if (acct_globals.file && acct_globals.file->f_vfsmnt == m)
+ if (acct_globals.file && acct_globals.file->f_path.mnt == m)
acct_file_reopen(NULL);
spin_unlock(&acct_globals.lock);
}
{
spin_lock(&acct_globals.lock);
if (acct_globals.file &&
- acct_globals.file->f_vfsmnt->mnt_sb == sb) {
+ acct_globals.file->f_path.mnt->mnt_sb == sb) {
acct_file_reopen(NULL);
}
spin_unlock(&acct_globals.lock);
u64 elapsed;
u64 run_time;
struct timespec uptime;
+ struct tty_struct *tty;
/*
* First check to see if there is enough free_space to continue
ac.ac_ppid = current->parent->tgid;
#endif
- mutex_lock(&tty_mutex);
- /* FIXME: Whoever is responsible for current->signal locking needs
- to use the same locking all over the kernel and document it */
- read_lock(&tasklist_lock);
- ac.ac_tty = current->signal->tty ?
- old_encode_dev(tty_devnum(current->signal->tty)) : 0;
- read_unlock(&tasklist_lock);
- mutex_unlock(&tty_mutex);
-
spin_lock_irq(¤t->sighand->siglock);
+ tty = current->signal->tty;
+ ac.ac_tty = tty ? old_encode_dev(tty_devnum(tty)) : 0;
ac.ac_utime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_utime)));
ac.ac_stime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_stime)));
ac.ac_flag = pacct->ac_flag;
if ((vma->vm_flags & VM_EXECUTABLE) &&
vma->vm_file) {
audit_log_d_path(ab, "exe=",
- vma->vm_file->f_dentry,
- vma->vm_file->f_vfsmnt);
+ vma->vm_file->f_path.dentry,
+ vma->vm_file->f_path.mnt);
break;
}
vma = vma->vm_next;
context->return_code);
mutex_lock(&tty_mutex);
+ read_lock(&tasklist_lock);
if (tsk->signal && tsk->signal->tty && tsk->signal->tty->name)
tty = tsk->signal->tty->name;
else
tty = "(none)";
+ read_unlock(&tasklist_lock);
audit_log_format(ab,
" a0=%lx a1=%lx a2=%lx a3=%lx items=%d"
" ppid=%d pid=%d auid=%u uid=%u gid=%u"
*
*
* When reading/writing to a file:
- * - the cpuset to use in file->f_dentry->d_parent->d_fsdata
- * - the 'cftype' of the file is file->f_dentry->d_fsdata
+ * - the cpuset to use in file->f_path.dentry->d_parent->d_fsdata
+ * - the 'cftype' of the file is file->f_path.dentry->d_fsdata
*/
struct cftype {
const char __user *userbuf,
size_t nbytes, loff_t *unused_ppos)
{
- struct cpuset *cs = __d_cs(file->f_dentry->d_parent);
- struct cftype *cft = __d_cft(file->f_dentry);
+ struct cpuset *cs = __d_cs(file->f_path.dentry->d_parent);
+ struct cftype *cft = __d_cft(file->f_path.dentry);
cpuset_filetype_t type = cft->private;
char *buffer;
char *pathbuf = NULL;
size_t nbytes, loff_t *ppos)
{
ssize_t retval = 0;
- struct cftype *cft = __d_cft(file->f_dentry);
+ struct cftype *cft = __d_cft(file->f_path.dentry);
if (!cft)
return -ENODEV;
static ssize_t cpuset_common_file_read(struct file *file, char __user *buf,
size_t nbytes, loff_t *ppos)
{
- struct cftype *cft = __d_cft(file->f_dentry);
- struct cpuset *cs = __d_cs(file->f_dentry->d_parent);
+ struct cftype *cft = __d_cft(file->f_path.dentry);
+ struct cpuset *cs = __d_cs(file->f_path.dentry->d_parent);
cpuset_filetype_t type = cft->private;
char *page;
ssize_t retval = 0;
loff_t *ppos)
{
ssize_t retval = 0;
- struct cftype *cft = __d_cft(file->f_dentry);
+ struct cftype *cft = __d_cft(file->f_path.dentry);
if (!cft)
return -ENODEV;
if (err)
return err;
- cft = __d_cft(file->f_dentry);
+ cft = __d_cft(file->f_path.dentry);
if (!cft)
return -ENODEV;
if (cft->open)
static int cpuset_file_release(struct inode *inode, struct file *file)
{
- struct cftype *cft = __d_cft(file->f_dentry);
+ struct cftype *cft = __d_cft(file->f_path.dentry);
if (cft->release)
return cft->release(inode, file);
return 0;
*/
static int cpuset_tasks_open(struct inode *unused, struct file *file)
{
- struct cpuset *cs = __d_cs(file->f_dentry->d_parent);
+ struct cpuset *cs = __d_cs(file->f_path.dentry->d_parent);
struct ctr_struct *ctr;
pid_t *pidarray;
int npids;
}
/**
- * cpuset_zone_allowed - Can we allocate memory on zone z's memory node?
+ * cpuset_zone_allowed_softwall - Can we allocate on zone z's memory node?
* @z: is this zone on an allowed node?
- * @gfp_mask: memory allocation flags (we use __GFP_HARDWALL)
+ * @gfp_mask: memory allocation flags
*
- * If we're in interrupt, yes, we can always allocate. If zone
+ * If we're in interrupt, yes, we can always allocate. If
+ * __GFP_THISNODE is set, yes, we can always allocate. If zone
* z's node is in our tasks mems_allowed, yes. If it's not a
* __GFP_HARDWALL request and this zone's nodes is in the nearest
* mem_exclusive cpuset ancestor to this tasks cpuset, yes.
* Otherwise, no.
*
+ * If __GFP_HARDWALL is set, cpuset_zone_allowed_softwall()
+ * reduces to cpuset_zone_allowed_hardwall(). Otherwise,
+ * cpuset_zone_allowed_softwall() might sleep, and might allow a zone
+ * from an enclosing cpuset.
+ *
+ * cpuset_zone_allowed_hardwall() only handles the simpler case of
+ * hardwall cpusets, and never sleeps.
+ *
+ * The __GFP_THISNODE placement logic is really handled elsewhere,
+ * by forcibly using a zonelist starting at a specified node, and by
+ * (in get_page_from_freelist()) refusing to consider the zones for
+ * any node on the zonelist except the first. By the time any such
+ * calls get to this routine, we should just shut up and say 'yes'.
+ *
* GFP_USER allocations are marked with the __GFP_HARDWALL bit,
* and do not allow allocations outside the current tasks cpuset.
* GFP_KERNEL allocations are not so marked, so can escape to the
- * nearest mem_exclusive ancestor cpuset.
+ * nearest enclosing mem_exclusive ancestor cpuset.
*
- * Scanning up parent cpusets requires callback_mutex. The __alloc_pages()
- * routine only calls here with __GFP_HARDWALL bit _not_ set if
- * it's a GFP_KERNEL allocation, and all nodes in the current tasks
- * mems_allowed came up empty on the first pass over the zonelist.
- * So only GFP_KERNEL allocations, if all nodes in the cpuset are
- * short of memory, might require taking the callback_mutex mutex.
+ * Scanning up parent cpusets requires callback_mutex. The
+ * __alloc_pages() routine only calls here with __GFP_HARDWALL bit
+ * _not_ set if it's a GFP_KERNEL allocation, and all nodes in the
+ * current tasks mems_allowed came up empty on the first pass over
+ * the zonelist. So only GFP_KERNEL allocations, if all nodes in the
+ * cpuset are short of memory, might require taking the callback_mutex
+ * mutex.
*
* The first call here from mm/page_alloc:get_page_from_freelist()
- * has __GFP_HARDWALL set in gfp_mask, enforcing hardwall cpusets, so
- * no allocation on a node outside the cpuset is allowed (unless in
- * interrupt, of course).
+ * has __GFP_HARDWALL set in gfp_mask, enforcing hardwall cpusets,
+ * so no allocation on a node outside the cpuset is allowed (unless
+ * in interrupt, of course).
*
* The second pass through get_page_from_freelist() doesn't even call
* here for GFP_ATOMIC calls. For those calls, the __alloc_pages()
* GFP_USER - only nodes in current tasks mems allowed ok.
*
* Rule:
- * Don't call cpuset_zone_allowed() if you can't sleep, unless you
+ * Don't call cpuset_zone_allowed_softwall if you can't sleep, unless you
* pass in the __GFP_HARDWALL flag set in gfp_flag, which disables
* the code that might scan up ancestor cpusets and sleep.
- **/
+ */
-int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
+int __cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask)
{
int node; /* node that zone z is on */
const struct cpuset *cs; /* current cpuset ancestors */
return allowed;
}
+/*
+ * cpuset_zone_allowed_hardwall - Can we allocate on zone z's memory node?
+ * @z: is this zone on an allowed node?
+ * @gfp_mask: memory allocation flags
+ *
+ * If we're in interrupt, yes, we can always allocate.
+ * If __GFP_THISNODE is set, yes, we can always allocate. If zone
+ * z's node is in our tasks mems_allowed, yes. Otherwise, no.
+ *
+ * The __GFP_THISNODE placement logic is really handled elsewhere,
+ * by forcibly using a zonelist starting at a specified node, and by
+ * (in get_page_from_freelist()) refusing to consider the zones for
+ * any node on the zonelist except the first. By the time any such
+ * calls get to this routine, we should just shut up and say 'yes'.
+ *
+ * Unlike the cpuset_zone_allowed_softwall() variant, above,
+ * this variant requires that the zone be in the current tasks
+ * mems_allowed or that we're in interrupt. It does not scan up the
+ * cpuset hierarchy for the nearest enclosing mem_exclusive cpuset.
+ * It never sleeps.
+ */
+
+int __cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask)
+{
+ int node; /* node that zone z is on */
+
+ if (in_interrupt() || (gfp_mask & __GFP_THISNODE))
+ return 1;
+ node = zone_to_nid(z);
+ if (node_isset(node, current->mems_allowed))
+ return 1;
+ return 0;
+}
+
/**
* cpuset_lock - lock out any changes to cpuset structures
*
#include <linux/completion.h>
#include <linux/personality.h>
#include <linux/tty.h>
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include <linux/key.h>
#include <linux/security.h>
#include <linux/cpu.h>
#include <linux/file.h>
#include <linux/binfmts.h>
#include <linux/nsproxy.h>
+#include <linux/pid_namespace.h>
#include <linux/ptrace.h>
#include <linux/profile.h>
#include <linux/mount.h>
#include <asm/mmu_context.h>
extern void sem_exit (void);
-extern struct task_struct *child_reaper;
static void exit_mm(struct task_struct * tsk);
int session_of_pgrp(int pgrp)
{
struct task_struct *p;
- int sid = -1;
+ int sid = 0;
read_lock(&tasklist_lock);
- do_each_task_pid(pgrp, PIDTYPE_PGID, p) {
- if (p->signal->session > 0) {
- sid = p->signal->session;
- goto out;
- }
- } while_each_task_pid(pgrp, PIDTYPE_PGID, p);
- p = find_task_by_pid(pgrp);
- if (p)
- sid = p->signal->session;
-out:
+
+ p = find_task_by_pid_type(PIDTYPE_PGID, pgrp);
+ if (p == NULL)
+ p = find_task_by_pid(pgrp);
+ if (p != NULL)
+ sid = process_session(p);
+
read_unlock(&tasklist_lock);
-
+
return sid;
}
|| p->exit_state
|| is_init(p->real_parent))
continue;
- if (process_group(p->real_parent) != pgrp
- && p->real_parent->signal->session == p->signal->session) {
+ if (process_group(p->real_parent) != pgrp &&
+ process_session(p->real_parent) == process_session(p)) {
ret = 0;
break;
}
}
/**
- * reparent_to_init - Reparent the calling kernel thread to the init task.
+ * reparent_to_init - Reparent the calling kernel thread to the init task
+ * of the pid space that the thread belongs to.
*
* If a kernel thread is launched as a result of a system call, or if
* it ever exits, it should generally reparent itself to init so that
ptrace_unlink(current);
/* Reparent to init */
remove_parent(current);
- current->parent = child_reaper;
- current->real_parent = child_reaper;
+ current->parent = child_reaper(current);
+ current->real_parent = child_reaper(current);
add_parent(current);
/* Set the exit signal to SIGCHLD so we signal init on exit */
{
struct task_struct *curr = current->group_leader;
- if (curr->signal->session != session) {
+ if (process_session(curr) != session) {
detach_pid(curr, PIDTYPE_SID);
- curr->signal->session = session;
+ set_signal_session(curr->signal, session);
attach_pid(curr, PIDTYPE_SID, session);
}
if (process_group(curr) != pgrp) {
}
}
-void set_special_pids(pid_t session, pid_t pgrp)
+static void set_special_pids(pid_t session, pid_t pgrp)
{
write_lock_irq(&tasklist_lock);
__set_special_pids(session, pgrp);
exit_mm(current);
set_special_pids(1, 1);
- mutex_lock(&tty_mutex);
- current->signal->tty = NULL;
- mutex_unlock(&tty_mutex);
+ proc_clear_tty(current);
/* Block and flush all signals */
sigfillset(&blocked);
for (;;) {
unsigned long set;
i = j * __NFDBITS;
- if (i >= fdt->max_fdset || i >= fdt->max_fds)
+ if (i >= fdt->max_fds)
break;
set = fdt->open_fds->fds_bits[j++];
while (set) {
* you can free files immediately.
*/
fdt = files_fdtable(files);
- if (fdt == &files->fdtab)
- fdt->free_files = files;
- else
+ if (fdt != &files->fdtab)
kmem_cache_free(files_cachep, files);
- free_fdtable(fdt);
+ call_rcu(&fdt->rcu, free_fdtable_rcu);
}
}
* outside, so the child pgrp is now orphaned.
*/
if ((process_group(p) != process_group(father)) &&
- (p->signal->session == father->signal->session)) {
+ (process_session(p) == process_session(father))) {
int pgrp = process_group(p);
- if (will_become_orphaned_pgrp(pgrp, NULL) && has_stopped_jobs(pgrp)) {
+ if (will_become_orphaned_pgrp(pgrp, NULL) &&
+ has_stopped_jobs(pgrp)) {
__kill_pg_info(SIGHUP, SEND_SIG_PRIV, pgrp);
__kill_pg_info(SIGCONT, SEND_SIG_PRIV, pgrp);
}
* When we die, we re-parent all our children.
* Try to give them to another thread in our thread
* group, and if no such member exists, give it to
- * the global child reaper process (ie "init")
+ * the child reaper process (ie "init") in our pid
+ * space.
*/
static void
forget_original_parent(struct task_struct *father, struct list_head *to_release)
do {
reaper = next_thread(reaper);
if (reaper == father) {
- reaper = child_reaper;
+ reaper = child_reaper(father);
break;
}
} while (reaper->exit_state);
t = tsk->real_parent;
if ((process_group(t) != process_group(tsk)) &&
- (t->signal->session == tsk->signal->session) &&
+ (process_session(t) == process_session(tsk)) &&
will_become_orphaned_pgrp(process_group(tsk), tsk) &&
has_stopped_jobs(process_group(tsk))) {
__kill_pg_info(SIGHUP, SEND_SIG_PRIV, process_group(tsk));
panic("Aiee, killing interrupt handler!");
if (unlikely(!tsk->pid))
panic("Attempted to kill the idle task!");
- if (unlikely(tsk == child_reaper))
- panic("Attempted to kill init!");
+ if (unlikely(tsk == child_reaper(tsk))) {
+ if (tsk->nsproxy->pid_ns != &init_pid_ns)
+ tsk->nsproxy->pid_ns->child_reaper = init_pid_ns.child_reaper;
+ else
+ panic("Attempted to kill init!");
+ }
+
if (unlikely(current->ptrace & PT_TRACE_EXIT)) {
current->ptrace_message = code;
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/completion.h>
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include <linux/personality.h>
#include <linux/mempolicy.h>
#include <linux/sem.h>
#include <linux/syscalls.h>
#include <linux/jiffies.h>
#include <linux/futex.h>
+#include <linux/task_io_accounting_ops.h>
#include <linux/rcupdate.h>
#include <linux/ptrace.h>
#include <linux/mount.h>
struct mempolicy *pol;
down_write(&oldmm->mmap_sem);
- flush_cache_mm(oldmm);
+ flush_cache_dup_mm(oldmm);
/*
* Not linked in yet - no deadlock potential:
*/
anon_vma_link(tmp);
file = tmp->vm_file;
if (file) {
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
get_file(file);
if (tmp->vm_flags & VM_DENYWRITE)
atomic_dec(&inode->i_writecount);
static int count_open_files(struct fdtable *fdt)
{
- int size = fdt->max_fdset;
+ int size = fdt->max_fds;
int i;
/* Find the last open fd */
newf->next_fd = 0;
fdt = &newf->fdtab;
fdt->max_fds = NR_OPEN_DEFAULT;
- fdt->max_fdset = EMBEDDED_FD_SET_SIZE;
fdt->close_on_exec = (fd_set *)&newf->close_on_exec_init;
fdt->open_fds = (fd_set *)&newf->open_fds_init;
fdt->fd = &newf->fd_array[0];
INIT_RCU_HEAD(&fdt->rcu);
- fdt->free_files = NULL;
fdt->next = NULL;
rcu_assign_pointer(newf->fdt, fdt);
out:
{
struct files_struct *newf;
struct file **old_fds, **new_fds;
- int open_files, size, i, expand;
+ int open_files, size, i;
struct fdtable *old_fdt, *new_fdt;
*errorp = -ENOMEM;
spin_lock(&oldf->file_lock);
old_fdt = files_fdtable(oldf);
new_fdt = files_fdtable(newf);
- size = old_fdt->max_fdset;
open_files = count_open_files(old_fdt);
- expand = 0;
/*
- * Check whether we need to allocate a larger fd array or fd set.
- * Note: we're not a clone task, so the open count won't change.
+ * Check whether we need to allocate a larger fd array and fd set.
+ * Note: we're not a clone task, so the open count won't change.
*/
- if (open_files > new_fdt->max_fdset) {
- new_fdt->max_fdset = 0;
- expand = 1;
- }
if (open_files > new_fdt->max_fds) {
new_fdt->max_fds = 0;
- expand = 1;
- }
-
- /* if the old fdset gets grown now, we'll only copy up to "size" fds */
- if (expand) {
spin_unlock(&oldf->file_lock);
spin_lock(&newf->file_lock);
*errorp = expand_files(newf, open_files-1);
old_fds = old_fdt->fd;
new_fds = new_fdt->fd;
- memcpy(new_fdt->open_fds->fds_bits, old_fdt->open_fds->fds_bits, open_files/8);
- memcpy(new_fdt->close_on_exec->fds_bits, old_fdt->close_on_exec->fds_bits, open_files/8);
+ memcpy(new_fdt->open_fds->fds_bits,
+ old_fdt->open_fds->fds_bits, open_files/8);
+ memcpy(new_fdt->close_on_exec->fds_bits,
+ old_fdt->close_on_exec->fds_bits, open_files/8);
for (i = open_files; i != 0; i--) {
struct file *f = *old_fds++;
/* This is long word aligned thus could use a optimized version */
memset(new_fds, 0, size);
- if (new_fdt->max_fdset > open_files) {
- int left = (new_fdt->max_fdset-open_files)/8;
+ if (new_fdt->max_fds > open_files) {
+ int left = (new_fdt->max_fds-open_files)/8;
int start = open_files / (8 * sizeof(unsigned long));
memset(&new_fdt->open_fds->fds_bits[start], 0, left);
memset(&new_fdt->close_on_exec->fds_bits[start], 0, left);
}
-out:
return newf;
out_release:
- free_fdset (new_fdt->close_on_exec, new_fdt->max_fdset);
- free_fdset (new_fdt->open_fds, new_fdt->max_fdset);
- free_fd_array(new_fdt->fd, new_fdt->max_fds);
kmem_cache_free(files_cachep, newf);
+out:
return NULL;
}
p->wchar = 0; /* I/O counter: bytes written */
p->syscr = 0; /* I/O counter: read syscalls */
p->syscw = 0; /* I/O counter: write syscalls */
+ task_io_accounting_init(p);
acct_clear_integrals(p);
p->it_virt_expires = cputime_zero;
if (thread_group_leader(p)) {
p->signal->tty = current->signal->tty;
p->signal->pgrp = process_group(current);
- p->signal->session = current->signal->session;
+ set_signal_session(p->signal, process_session(current));
attach_pid(p, PIDTYPE_PGID, process_group(p));
- attach_pid(p, PIDTYPE_SID, p->signal->session);
+ attach_pid(p, PIDTYPE_SID, process_session(p));
list_add_tail_rcu(&p->tasks, &init_task.tasks);
__get_cpu_var(process_counts)++;
}
/*
- * Unshare the namespace structure if it is being shared
+ * Unshare the mnt_namespace structure if it is being shared
*/
-static int unshare_namespace(unsigned long unshare_flags, struct namespace **new_nsp, struct fs_struct *new_fs)
+static int unshare_mnt_namespace(unsigned long unshare_flags,
+ struct mnt_namespace **new_nsp, struct fs_struct *new_fs)
{
- struct namespace *ns = current->nsproxy->namespace;
+ struct mnt_namespace *ns = current->nsproxy->mnt_ns;
if ((unshare_flags & CLONE_NEWNS) && ns) {
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- *new_nsp = dup_namespace(current, new_fs ? new_fs : current->fs);
+ *new_nsp = dup_mnt_ns(current, new_fs ? new_fs : current->fs);
if (!*new_nsp)
return -ENOMEM;
}
}
/*
- * Unsharing of sighand for tasks created with CLONE_SIGHAND is not
- * supported yet
+ * Unsharing of sighand is not supported yet
*/
static int unshare_sighand(unsigned long unshare_flags, struct sighand_struct **new_sighp)
{
struct sighand_struct *sigh = current->sighand;
- if ((unshare_flags & CLONE_SIGHAND) &&
- (sigh && atomic_read(&sigh->count) > 1))
+ if ((unshare_flags & CLONE_SIGHAND) && atomic_read(&sigh->count) > 1)
return -EINVAL;
else
return 0;
{
int err = 0;
struct fs_struct *fs, *new_fs = NULL;
- struct namespace *ns, *new_ns = NULL;
- struct sighand_struct *sigh, *new_sigh = NULL;
+ struct mnt_namespace *ns, *new_ns = NULL;
+ struct sighand_struct *new_sigh = NULL;
struct mm_struct *mm, *new_mm = NULL, *active_mm = NULL;
struct files_struct *fd, *new_fd = NULL;
struct sem_undo_list *new_ulist = NULL;
goto bad_unshare_out;
if ((err = unshare_fs(unshare_flags, &new_fs)))
goto bad_unshare_cleanup_thread;
- if ((err = unshare_namespace(unshare_flags, &new_ns, new_fs)))
+ if ((err = unshare_mnt_namespace(unshare_flags, &new_ns, new_fs)))
goto bad_unshare_cleanup_fs;
if ((err = unshare_sighand(unshare_flags, &new_sigh)))
goto bad_unshare_cleanup_ns;
}
}
- if (new_fs || new_ns || new_sigh || new_mm || new_fd || new_ulist ||
+ if (new_fs || new_ns || new_mm || new_fd || new_ulist ||
new_uts || new_ipc) {
task_lock(current);
}
if (new_ns) {
- ns = current->nsproxy->namespace;
- current->nsproxy->namespace = new_ns;
+ ns = current->nsproxy->mnt_ns;
+ current->nsproxy->mnt_ns = new_ns;
new_ns = ns;
}
- if (new_sigh) {
- sigh = current->sighand;
- rcu_assign_pointer(current->sighand, new_sigh);
- new_sigh = sigh;
- }
-
if (new_mm) {
mm = current->mm;
active_mm = current->active_mm;
bad_unshare_cleanup_ns:
if (new_ns)
- put_namespace(new_ns);
+ put_mnt_ns(new_ns);
bad_unshare_cleanup_fs:
if (new_fs)
/*
* Get parameters which are the keys for a futex.
*
- * For shared mappings, it's (page->index, vma->vm_file->f_dentry->d_inode,
+ * For shared mappings, it's (page->index, vma->vm_file->f_path.dentry->d_inode,
* offset_within_page). For private mappings, it's (uaddr, current->mm).
* We can usually work out the index without swapping in the page.
*
/*
* Linear file mappings are also simple.
*/
- key->shared.inode = vma->vm_file->f_dentry->d_inode;
+ key->shared.inode = vma->vm_file->f_path.dentry->d_inode;
key->both.offset++; /* Bit 0 of offset indicates inode-based key. */
if (likely(!(vma->vm_flags & VM_NONLINEAR))) {
key->shared.pgoff = (((address - vma->vm_start) >> PAGE_SHIFT)
goto out;
}
filp->f_op = &futex_fops;
- filp->f_vfsmnt = mntget(futex_mnt);
- filp->f_dentry = dget(futex_mnt->mnt_root);
- filp->f_mapping = filp->f_dentry->d_inode->i_mapping;
+ filp->f_path.mnt = mntget(futex_mnt);
+ filp->f_path.dentry = dget(futex_mnt->mnt_root);
+ filp->f_mapping = filp->f_path.dentry->d_inode->i_mapping;
if (signal) {
err = __f_setown(filp, task_pid(current), PIDTYPE_PID, 1);
unsigned int irq = (int)(long)data, full_count = count, err;
cpumask_t new_value, tmp;
- if (!irq_desc[irq].chip->set_affinity || no_irq_affinity)
+ if (!irq_desc[irq].chip->set_affinity || no_irq_affinity ||
+ CHECK_IRQ_PER_CPU(irq_desc[irq].status))
return -EIO;
err = cpumask_parse_user(buffer, count, new_value);
#endif
/* These will be re-linked against their real values during the second link stage */
-extern unsigned long kallsyms_addresses[] __attribute__((weak));
-extern unsigned long kallsyms_num_syms __attribute__((weak,section("data")));
-extern u8 kallsyms_names[] __attribute__((weak));
+extern const unsigned long kallsyms_addresses[] __attribute__((weak));
+extern const unsigned long kallsyms_num_syms __attribute__((weak));
+extern const u8 kallsyms_names[] __attribute__((weak));
-extern u8 kallsyms_token_table[] __attribute__((weak));
-extern u16 kallsyms_token_index[] __attribute__((weak));
+extern const u8 kallsyms_token_table[] __attribute__((weak));
+extern const u16 kallsyms_token_index[] __attribute__((weak));
-extern unsigned long kallsyms_markers[] __attribute__((weak));
+extern const unsigned long kallsyms_markers[] __attribute__((weak));
static inline int is_kernel_inittext(unsigned long addr)
{
static unsigned int kallsyms_expand_symbol(unsigned int off, char *result)
{
int len, skipped_first = 0;
- u8 *tptr, *data;
+ const u8 *tptr, *data;
/* get the compressed symbol length from the first symbol byte */
data = &kallsyms_names[off];
* kallsyms array */
static unsigned int get_symbol_offset(unsigned long pos)
{
- u8 *name;
+ const u8 *name;
int i;
/* use the closest marker we have. We have markers every 256 positions,
#include <linux/kmod.h>
#include <linux/smp_lock.h>
#include <linux/slab.h>
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include <linux/completion.h>
#include <linux/file.h>
#include <linux/workqueue.h>
#include "lockdep_internals.h"
/*
- * hash_lock: protects the lockdep hashes and class/list/hash allocators.
+ * lockdep_lock: protects the lockdep graph, the hashes and the
+ * class/list/hash allocators.
*
* This is one of the rare exceptions where it's justified
* to use a raw spinlock - we really dont want the spinlock
- * code to recurse back into the lockdep code.
+ * code to recurse back into the lockdep code...
*/
-static raw_spinlock_t hash_lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
+static raw_spinlock_t lockdep_lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
+
+static int graph_lock(void)
+{
+ __raw_spin_lock(&lockdep_lock);
+ /*
+ * Make sure that if another CPU detected a bug while
+ * walking the graph we dont change it (while the other
+ * CPU is busy printing out stuff with the graph lock
+ * dropped already)
+ */
+ if (!debug_locks) {
+ __raw_spin_unlock(&lockdep_lock);
+ return 0;
+ }
+ return 1;
+}
+
+static inline int graph_unlock(void)
+{
+ __raw_spin_unlock(&lockdep_lock);
+ return 0;
+}
+
+/*
+ * Turn lock debugging off and return with 0 if it was off already,
+ * and also release the graph lock:
+ */
+static inline int debug_locks_off_graph_unlock(void)
+{
+ int ret = debug_locks_off();
+
+ __raw_spin_unlock(&lockdep_lock);
+
+ return ret;
+}
static int lockdep_initialized;
static struct lock_list list_entries[MAX_LOCKDEP_ENTRIES];
/*
- * Allocate a lockdep entry. (assumes hash_lock held, returns
+ * Allocate a lockdep entry. (assumes the graph_lock held, returns
* with NULL on failure)
*/
static struct lock_list *alloc_list_entry(void)
{
if (nr_list_entries >= MAX_LOCKDEP_ENTRIES) {
- __raw_spin_unlock(&hash_lock);
- debug_locks_off();
+ if (!debug_locks_off_graph_unlock())
+ return NULL;
+
printk("BUG: MAX_LOCKDEP_ENTRIES too low!\n");
printk("turning off the locking correctness validator.\n");
return NULL;
*/
#define VERBOSE 0
-#ifdef VERBOSE
-# define VERY_VERBOSE 0
-#endif
+#define VERY_VERBOSE 0
#if VERBOSE
# define HARDIRQ_VERBOSE 1
!strcmp(class->name, "&struct->lockfield"))
return 1;
#endif
- /* Allow everything else. 0 would be filter everything else */
- return 1;
+ /* Filter everything else. 1 would be to allow everything else */
+ return 0;
}
#endif
/*
* Stack-trace: tightly packed array of stack backtrace
- * addresses. Protected by the hash_lock.
+ * addresses. Protected by the graph_lock.
*/
unsigned long nr_stack_trace_entries;
static unsigned long stack_trace[MAX_STACK_TRACE_ENTRIES];
trace->max_entries = trace->nr_entries;
nr_stack_trace_entries += trace->nr_entries;
- if (DEBUG_LOCKS_WARN_ON(nr_stack_trace_entries > MAX_STACK_TRACE_ENTRIES)) {
- __raw_spin_unlock(&hash_lock);
- return 0;
- }
if (nr_stack_trace_entries == MAX_STACK_TRACE_ENTRIES) {
- __raw_spin_unlock(&hash_lock);
- if (debug_locks_off()) {
- printk("BUG: MAX_STACK_TRACE_ENTRIES too low!\n");
- printk("turning off the locking correctness validator.\n");
- dump_stack();
- }
+ if (!debug_locks_off_graph_unlock())
+ return 0;
+
+ printk("BUG: MAX_STACK_TRACE_ENTRIES too low!\n");
+ printk("turning off the locking correctness validator.\n");
+ dump_stack();
+
return 0;
}
{
struct task_struct *curr = current;
- __raw_spin_unlock(&hash_lock);
- debug_locks_off();
- if (debug_locks_silent)
+ if (!debug_locks_off_graph_unlock() || debug_locks_silent)
return 0;
printk("\n=======================================================\n");
if (debug_locks_silent)
return 0;
- /* hash_lock unlocked by the header */
- __raw_spin_lock(&hash_lock);
this.class = check_source->class;
if (!save_trace(&this.trace))
return 0;
- __raw_spin_unlock(&hash_lock);
+
print_circular_bug_entry(&this, 0);
printk("\nother info that might help us debug this:\n\n");
static int noinline print_infinite_recursion_bug(void)
{
- __raw_spin_unlock(&hash_lock);
- DEBUG_LOCKS_WARN_ON(1);
+ if (!debug_locks_off_graph_unlock())
+ return 0;
+
+ WARN_ON(1);
return 0;
}
enum lock_usage_bit bit2,
const char *irqclass)
{
- __raw_spin_unlock(&hash_lock);
- debug_locks_off();
- if (debug_locks_silent)
+ if (!debug_locks_off_graph_unlock() || debug_locks_silent)
return 0;
printk("\n======================================================\n");
print_deadlock_bug(struct task_struct *curr, struct held_lock *prev,
struct held_lock *next)
{
- debug_locks_off();
- __raw_spin_unlock(&hash_lock);
- if (debug_locks_silent)
+ if (!debug_locks_off_graph_unlock() || debug_locks_silent)
return 0;
printk("\n=============================================\n");
* Debugging printouts:
*/
if (verbose(prev->class) || verbose(next->class)) {
- __raw_spin_unlock(&hash_lock);
+ graph_unlock();
printk("\n new dependency: ");
print_lock_name(prev->class);
printk(" => ");
print_lock_name(next->class);
printk("\n");
dump_stack();
- __raw_spin_lock(&hash_lock);
+ return graph_lock();
}
return 1;
}
}
return 1;
out_bug:
- __raw_spin_unlock(&hash_lock);
- DEBUG_LOCKS_WARN_ON(1);
+ if (!debug_locks_off_graph_unlock())
+ return 0;
+
+ WARN_ON(1);
return 0;
}
hash_head = classhashentry(key);
raw_local_irq_save(flags);
- __raw_spin_lock(&hash_lock);
+ if (!graph_lock()) {
+ raw_local_irq_restore(flags);
+ return NULL;
+ }
/*
* We have to do the hash-walk again, to avoid races
* with another CPU:
* the hash:
*/
if (nr_lock_classes >= MAX_LOCKDEP_KEYS) {
- __raw_spin_unlock(&hash_lock);
+ if (!debug_locks_off_graph_unlock()) {
+ raw_local_irq_restore(flags);
+ return NULL;
+ }
raw_local_irq_restore(flags);
- debug_locks_off();
+
printk("BUG: MAX_LOCKDEP_KEYS too low!\n");
printk("turning off the locking correctness validator.\n");
return NULL;
list_add_tail_rcu(&class->hash_entry, hash_head);
if (verbose(class)) {
- __raw_spin_unlock(&hash_lock);
+ graph_unlock();
raw_local_irq_restore(flags);
+
printk("\nnew class %p: %s", class->key, class->name);
if (class->name_version > 1)
printk("#%d", class->name_version);
printk("\n");
dump_stack();
+
raw_local_irq_save(flags);
- __raw_spin_lock(&hash_lock);
+ if (!graph_lock()) {
+ raw_local_irq_restore(flags);
+ return NULL;
+ }
}
out_unlock_set:
- __raw_spin_unlock(&hash_lock);
+ graph_unlock();
raw_local_irq_restore(flags);
if (!subclass || force)
* add it and return 0 - in this case the new dependency chain is
* validated. If the key is already hashed, return 1.
*/
-static inline int lookup_chain_cache(u64 chain_key)
+static inline int lookup_chain_cache(u64 chain_key, struct lock_class *class)
{
struct list_head *hash_head = chainhashentry(chain_key);
struct lock_chain *chain;
if (chain->chain_key == chain_key) {
cache_hit:
debug_atomic_inc(&chain_lookup_hits);
- /*
- * In the debugging case, force redundant checking
- * by returning 1:
- */
-#ifdef CONFIG_DEBUG_LOCKDEP
- __raw_spin_lock(&hash_lock);
- return 1;
-#endif
+ if (very_verbose(class))
+ printk("\nhash chain already cached, key: %016Lx tail class: [%p] %s\n", chain_key, class->key, class->name);
return 0;
}
}
+ if (very_verbose(class))
+ printk("\nnew hash chain, key: %016Lx tail class: [%p] %s\n", chain_key, class->key, class->name);
/*
* Allocate a new chain entry from the static array, and add
* it to the hash:
*/
- __raw_spin_lock(&hash_lock);
+ if (!graph_lock())
+ return 0;
/*
* We have to walk the chain again locked - to avoid duplicates:
*/
list_for_each_entry(chain, hash_head, entry) {
if (chain->chain_key == chain_key) {
- __raw_spin_unlock(&hash_lock);
+ graph_unlock();
goto cache_hit;
}
}
if (unlikely(nr_lock_chains >= MAX_LOCKDEP_CHAINS)) {
- __raw_spin_unlock(&hash_lock);
- debug_locks_off();
+ if (!debug_locks_off_graph_unlock())
+ return 0;
+
printk("BUG: MAX_LOCKDEP_CHAINS too low!\n");
printk("turning off the locking correctness validator.\n");
return 0;
struct held_lock *this, int forwards,
const char *irqclass)
{
- __raw_spin_unlock(&hash_lock);
- debug_locks_off();
- if (debug_locks_silent)
+ if (!debug_locks_off_graph_unlock() || debug_locks_silent)
return 0;
printk("\n=========================================================\n");
return print_irq_inversion_bug(curr, backwards_match, this, 0, irqclass);
}
-static inline void print_irqtrace_events(struct task_struct *curr)
+void print_irqtrace_events(struct task_struct *curr)
{
printk("irq event stamp: %u\n", curr->irq_events);
printk("hardirqs last enabled at (%u): ", curr->hardirq_enable_event);
print_ip_sym(curr->softirq_disable_ip);
}
-#else
-static inline void print_irqtrace_events(struct task_struct *curr)
-{
-}
#endif
static int
print_usage_bug(struct task_struct *curr, struct held_lock *this,
enum lock_usage_bit prev_bit, enum lock_usage_bit new_bit)
{
- __raw_spin_unlock(&hash_lock);
- debug_locks_off();
- if (debug_locks_silent)
+ if (!debug_locks_off_graph_unlock() || debug_locks_silent)
return 0;
printk("\n=================================\n");
if (likely(this->class->usage_mask & new_mask))
return 1;
- __raw_spin_lock(&hash_lock);
+ if (!graph_lock())
+ return 0;
/*
* Make sure we didnt race:
*/
if (unlikely(this->class->usage_mask & new_mask)) {
- __raw_spin_unlock(&hash_lock);
+ graph_unlock();
return 1;
}
debug_atomic_dec(&nr_unused_locks);
break;
default:
- __raw_spin_unlock(&hash_lock);
- debug_locks_off();
+ if (!debug_locks_off_graph_unlock())
+ return 0;
WARN_ON(1);
return 0;
}
- __raw_spin_unlock(&hash_lock);
+ graph_unlock();
/*
- * We must printk outside of the hash_lock:
+ * We must printk outside of the graph_lock:
*/
if (ret == 2) {
printk("\nmarked lock as {%s}:\n", usage_str[new_bit]);
* We look up the chain_key and do the O(N^2) check and update of
* the dependencies only if this is a new dependency chain.
* (If lookup_chain_cache() returns with 1 it acquires
- * hash_lock for us)
+ * graph_lock for us)
*/
- if (!trylock && (check == 2) && lookup_chain_cache(chain_key)) {
+ if (!trylock && (check == 2) && lookup_chain_cache(chain_key, class)) {
/*
* Check whether last held lock:
*
if (!chain_head && ret != 2)
if (!check_prevs_add(curr, hlock))
return 0;
- __raw_spin_unlock(&hash_lock);
+ graph_unlock();
}
curr->lockdep_depth++;
check_chain_key(curr);
void lockdep_reset(void)
{
unsigned long flags;
+ int i;
raw_local_irq_save(flags);
current->curr_chain_key = 0;
nr_softirq_chains = 0;
nr_process_chains = 0;
debug_locks = 1;
+ for (i = 0; i < CHAINHASH_SIZE; i++)
+ INIT_LIST_HEAD(chainhash_table + i);
raw_local_irq_restore(flags);
}
int i;
raw_local_irq_save(flags);
- __raw_spin_lock(&hash_lock);
+ graph_lock();
/*
* Unhash all classes that were created by this module:
zap_class(class);
}
- __raw_spin_unlock(&hash_lock);
+ graph_unlock();
raw_local_irq_restore(flags);
}
* Debug check: in the end all mapped classes should
* be gone.
*/
- __raw_spin_lock(&hash_lock);
+ graph_lock();
for (i = 0; i < CLASSHASH_SIZE; i++) {
head = classhash_table + i;
if (list_empty(head))
continue;
list_for_each_entry_safe(class, next, head, hash_entry) {
if (unlikely(class == lock->class_cache)) {
- __raw_spin_unlock(&hash_lock);
- DEBUG_LOCKS_WARN_ON(1);
+ if (debug_locks_off_graph_unlock())
+ WARN_ON(1);
goto out_restore;
}
}
}
- __raw_spin_unlock(&hash_lock);
+ graph_unlock();
out_restore:
raw_local_irq_restore(flags);
}
#endif /* CONFIG_MODULE_UNLOAD */
+static ssize_t show_initstate(struct module_attribute *mattr,
+ struct module *mod, char *buffer)
+{
+ const char *state = "unknown";
+
+ switch (mod->state) {
+ case MODULE_STATE_LIVE:
+ state = "live";
+ break;
+ case MODULE_STATE_COMING:
+ state = "coming";
+ break;
+ case MODULE_STATE_GOING:
+ state = "going";
+ break;
+ }
+ return sprintf(buffer, "%s\n", state);
+}
+
+static struct module_attribute initstate = {
+ .attr = { .name = "initstate", .mode = 0444, .owner = THIS_MODULE },
+ .show = show_initstate,
+};
+
static struct module_attribute *modinfo_attrs[] = {
&modinfo_version,
&modinfo_srcversion,
+ &initstate,
#ifdef CONFIG_MODULE_UNLOAD
&refcnt,
#endif
}
EXPORT_SYMBOL_GPL(mutex_lock_nested);
+
+int __sched
+mutex_lock_interruptible_nested(struct mutex *lock, unsigned int subclass)
+{
+ might_sleep();
+ return __mutex_lock_common(lock, TASK_INTERRUPTIBLE, subclass);
+}
+
+EXPORT_SYMBOL_GPL(mutex_lock_interruptible_nested);
#endif
/*
#include <linux/version.h>
#include <linux/nsproxy.h>
#include <linux/init_task.h>
-#include <linux/namespace.h>
+#include <linux/mnt_namespace.h>
#include <linux/utsname.h>
+#include <linux/pid_namespace.h>
struct nsproxy init_nsproxy = INIT_NSPROXY(init_nsproxy);
struct nsproxy *ns = clone_namespaces(orig);
if (ns) {
- if (ns->namespace)
- get_namespace(ns->namespace);
+ if (ns->mnt_ns)
+ get_mnt_ns(ns->mnt_ns);
if (ns->uts_ns)
get_uts_ns(ns->uts_ns);
if (ns->ipc_ns)
get_ipc_ns(ns->ipc_ns);
+ if (ns->pid_ns)
+ get_pid_ns(ns->pid_ns);
}
return ns;
tsk->nsproxy = new_ns;
- err = copy_namespace(flags, tsk);
+ err = copy_mnt_ns(flags, tsk);
if (err)
goto out_ns;
if (err)
goto out_ipc;
+ err = copy_pid_ns(flags, tsk);
+ if (err)
+ goto out_pid;
+
out:
put_nsproxy(old_ns);
return err;
+out_pid:
+ if (new_ns->ipc_ns)
+ put_ipc_ns(new_ns->ipc_ns);
out_ipc:
if (new_ns->uts_ns)
put_uts_ns(new_ns->uts_ns);
out_uts:
- if (new_ns->namespace)
- put_namespace(new_ns->namespace);
+ if (new_ns->mnt_ns)
+ put_mnt_ns(new_ns->mnt_ns);
out_ns:
tsk->nsproxy = old_ns;
kfree(new_ns);
void free_nsproxy(struct nsproxy *ns)
{
- if (ns->namespace)
- put_namespace(ns->namespace);
- if (ns->uts_ns)
- put_uts_ns(ns->uts_ns);
- if (ns->ipc_ns)
- put_ipc_ns(ns->ipc_ns);
- kfree(ns);
+ if (ns->mnt_ns)
+ put_mnt_ns(ns->mnt_ns);
+ if (ns->uts_ns)
+ put_uts_ns(ns->uts_ns);
+ if (ns->ipc_ns)
+ put_ipc_ns(ns->ipc_ns);
+ if (ns->pid_ns)
+ put_pid_ns(ns->pid_ns);
+ kfree(ns);
}
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/hash.h>
-#include <linux/pspace.h>
+#include <linux/pid_namespace.h>
#define pid_hashfn(nr) hash_long((unsigned long)nr, pidhash_shift)
static struct hlist_head *pid_hash;
#define BITS_PER_PAGE (PAGE_SIZE*8)
#define BITS_PER_PAGE_MASK (BITS_PER_PAGE-1)
-static inline int mk_pid(struct pspace *pspace, struct pidmap *map, int off)
+static inline int mk_pid(struct pid_namespace *pid_ns,
+ struct pidmap *map, int off)
{
- return (map - pspace->pidmap)*BITS_PER_PAGE + off;
+ return (map - pid_ns->pidmap)*BITS_PER_PAGE + off;
}
#define find_next_offset(map, off) \
* value does not cause lots of bitmaps to be allocated, but
* the scheme scales to up to 4 million PIDs, runtime.
*/
-struct pspace init_pspace = {
+struct pid_namespace init_pid_ns = {
+ .kref = {
+ .refcount = ATOMIC_INIT(2),
+ },
.pidmap = {
[ 0 ... PIDMAP_ENTRIES-1] = { ATOMIC_INIT(BITS_PER_PAGE), NULL }
},
- .last_pid = 0
+ .last_pid = 0,
+ .child_reaper = &init_task
};
/*
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(pidmap_lock);
-static fastcall void free_pidmap(struct pspace *pspace, int pid)
+static fastcall void free_pidmap(struct pid_namespace *pid_ns, int pid)
{
- struct pidmap *map = pspace->pidmap + pid / BITS_PER_PAGE;
+ struct pidmap *map = pid_ns->pidmap + pid / BITS_PER_PAGE;
int offset = pid & BITS_PER_PAGE_MASK;
clear_bit(offset, map->page);
atomic_inc(&map->nr_free);
}
-static int alloc_pidmap(struct pspace *pspace)
+static int alloc_pidmap(struct pid_namespace *pid_ns)
{
- int i, offset, max_scan, pid, last = pspace->last_pid;
+ int i, offset, max_scan, pid, last = pid_ns->last_pid;
struct pidmap *map;
pid = last + 1;
if (pid >= pid_max)
pid = RESERVED_PIDS;
offset = pid & BITS_PER_PAGE_MASK;
- map = &pspace->pidmap[pid/BITS_PER_PAGE];
+ map = &pid_ns->pidmap[pid/BITS_PER_PAGE];
max_scan = (pid_max + BITS_PER_PAGE - 1)/BITS_PER_PAGE - !offset;
for (i = 0; i <= max_scan; ++i) {
if (unlikely(!map->page)) {
do {
if (!test_and_set_bit(offset, map->page)) {
atomic_dec(&map->nr_free);
- pspace->last_pid = pid;
+ pid_ns->last_pid = pid;
return pid;
}
offset = find_next_offset(map, offset);
- pid = mk_pid(pspace, map, offset);
+ pid = mk_pid(pid_ns, map, offset);
/*
* find_next_offset() found a bit, the pid from it
* is in-bounds, and if we fell back to the last
(i != max_scan || pid < last ||
!((last+1) & BITS_PER_PAGE_MASK)));
}
- if (map < &pspace->pidmap[(pid_max-1)/BITS_PER_PAGE]) {
+ if (map < &pid_ns->pidmap[(pid_max-1)/BITS_PER_PAGE]) {
++map;
offset = 0;
} else {
- map = &pspace->pidmap[0];
+ map = &pid_ns->pidmap[0];
offset = RESERVED_PIDS;
if (unlikely(last == offset))
break;
}
- pid = mk_pid(pspace, map, offset);
+ pid = mk_pid(pid_ns, map, offset);
}
return -1;
}
-static int next_pidmap(struct pspace *pspace, int last)
+static int next_pidmap(struct pid_namespace *pid_ns, int last)
{
int offset;
struct pidmap *map, *end;
offset = (last + 1) & BITS_PER_PAGE_MASK;
- map = &pspace->pidmap[(last + 1)/BITS_PER_PAGE];
- end = &pspace->pidmap[PIDMAP_ENTRIES];
+ map = &pid_ns->pidmap[(last + 1)/BITS_PER_PAGE];
+ end = &pid_ns->pidmap[PIDMAP_ENTRIES];
for (; map < end; map++, offset = 0) {
if (unlikely(!map->page))
continue;
offset = find_next_bit((map)->page, BITS_PER_PAGE, offset);
if (offset < BITS_PER_PAGE)
- return mk_pid(pspace, map, offset);
+ return mk_pid(pid_ns, map, offset);
}
return -1;
}
hlist_del_rcu(&pid->pid_chain);
spin_unlock_irqrestore(&pidmap_lock, flags);
- free_pidmap(&init_pspace, pid->nr);
+ free_pidmap(current->nsproxy->pid_ns, pid->nr);
call_rcu(&pid->rcu, delayed_put_pid);
}
if (!pid)
goto out;
- nr = alloc_pidmap(&init_pspace);
+ nr = alloc_pidmap(current->nsproxy->pid_ns);
if (nr < 0)
goto out_free;
pid = find_pid(nr);
if (pid)
break;
- nr = next_pidmap(&init_pspace, nr);
+ nr = next_pidmap(current->nsproxy->pid_ns, nr);
} while (nr > 0);
return pid;
}
EXPORT_SYMBOL_GPL(find_get_pid);
+int copy_pid_ns(int flags, struct task_struct *tsk)
+{
+ struct pid_namespace *old_ns = tsk->nsproxy->pid_ns;
+ int err = 0;
+
+ if (!old_ns)
+ return 0;
+
+ get_pid_ns(old_ns);
+ return err;
+}
+
+void free_pid_ns(struct kref *kref)
+{
+ struct pid_namespace *ns;
+
+ ns = container_of(kref, struct pid_namespace, kref);
+ kfree(ns);
+}
+
/*
* The pid hash table is scaled according to the amount of memory in the
* machine. From a minimum of 16 slots up to 4096 slots at one gigabyte or
void __init pidmap_init(void)
{
- init_pspace.pidmap[0].page = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ init_pid_ns.pidmap[0].page = kzalloc(PAGE_SIZE, GFP_KERNEL);
/* Reserve PID 0. We never call free_pidmap(0) */
- set_bit(0, init_pspace.pidmap[0].page);
- atomic_dec(&init_pspace.pidmap[0].nr_free);
+ set_bit(0, init_pid_ns.pidmap[0].page);
+ atomic_dec(&init_pid_ns.pidmap[0].nr_free);
pid_cachep = kmem_cache_create("pid", sizeof(struct pid),
__alignof__(struct pid),
sending the processor to sleep and saving power.
config PM_LEGACY
- bool "Legacy Power Management API"
+ bool "Legacy Power Management API (DEPRECATED)"
depends on PM
- default y
+ default n
---help---
- Support for pm_register() and friends.
+ Support for pm_register() and friends. This old API is obsoleted
+ by the driver model.
- If unsure, say Y.
+ If unsure, say N.
config PM_DEBUG
bool "Power Management Debug Support"
{
switch(mode) {
case PM_DISK_PLATFORM:
- kernel_shutdown_prepare(SYSTEM_SUSPEND_DISK);
- pm_ops->enter(PM_SUSPEND_DISK);
- break;
+ if (pm_ops && pm_ops->enter) {
+ kernel_shutdown_prepare(SYSTEM_SUSPEND_DISK);
+ pm_ops->enter(PM_SUSPEND_DISK);
+ break;
+ }
case PM_DISK_SHUTDOWN:
kernel_power_off();
break;
DEFINE_MUTEX(pm_mutex);
struct pm_ops *pm_ops;
-suspend_disk_method_t pm_disk_mode = PM_DISK_SHUTDOWN;
+suspend_disk_method_t pm_disk_mode = PM_DISK_PLATFORM;
/**
* pm_set_ops - Set the global power method table.
if ((p == current) ||
(p->flags & PF_NOFREEZE) ||
(p->exit_state == EXIT_ZOMBIE) ||
- (p->exit_state == EXIT_DEAD) ||
- (p->state == TASK_STOPPED))
+ (p->exit_state == EXIT_DEAD))
return 0;
return 1;
}
unsigned long flags;
if (!freezing(p)) {
- freeze(p);
- spin_lock_irqsave(&p->sighand->siglock, flags);
- signal_wake_up(p, 0);
- spin_unlock_irqrestore(&p->sighand->siglock, flags);
+ rmb();
+ if (!frozen(p)) {
+ if (p->state == TASK_STOPPED)
+ force_sig_specific(SIGSTOP, p);
+
+ freeze(p);
+ spin_lock_irqsave(&p->sighand->siglock, flags);
+ signal_wake_up(p, p->state == TASK_STOPPED);
+ spin_unlock_irqrestore(&p->sighand->siglock, flags);
+ }
}
}
if (frozen(p))
continue;
- if (p->state == TASK_TRACED &&
- (frozen(p->parent) ||
- p->parent->state == TASK_STOPPED)) {
+ if (p->state == TASK_TRACED && frozen(p->parent)) {
cancel_freezing(p);
continue;
}
*/
struct rchan_buf *relay_create_buf(struct rchan *chan)
{
- struct rchan_buf *buf = kcalloc(1, sizeof(struct rchan_buf), GFP_KERNEL);
+ struct rchan_buf *buf = kzalloc(sizeof(struct rchan_buf), GFP_KERNEL);
if (!buf)
return NULL;
if (!(subbuf_size && n_subbufs))
return NULL;
- chan = kcalloc(1, sizeof(struct rchan), GFP_KERNEL);
+ chan = kzalloc(sizeof(struct rchan), GFP_KERNEL);
if (!chan)
return NULL;
if (!desc->count)
return 0;
- mutex_lock(&filp->f_dentry->d_inode->i_mutex);
+ mutex_lock(&filp->f_path.dentry->d_inode->i_mutex);
do {
if (!relay_file_read_avail(buf, *ppos))
break;
*ppos = relay_file_read_end_pos(buf, read_start, ret);
}
} while (desc->count && ret);
- mutex_unlock(&filp->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&filp->f_path.dentry->d_inode->i_mutex);
return desc->written;
}
unsigned long nr_uninterruptible;
unsigned long expired_timestamp;
- unsigned long long timestamp_last_tick;
+ /* Cached timestamp set by update_cpu_clock() */
+ unsigned long long most_recent_timestamp;
struct task_struct *curr, *idle;
+ unsigned long next_balance;
struct mm_struct *prev_mm;
struct prio_array *active, *expired, arrays[2];
int best_expired_prio;
* bump this up when changing the output format or the meaning of an existing
* format, so that tools can adapt (or abort)
*/
-#define SCHEDSTAT_VERSION 12
+#define SCHEDSTAT_VERSION 14
static int show_schedstat(struct seq_file *seq, void *v)
{
seq_printf(seq, "domain%d %s", dcnt++, mask_str);
for (itype = SCHED_IDLE; itype < MAX_IDLE_TYPES;
itype++) {
- seq_printf(seq, " %lu %lu %lu %lu %lu %lu %lu %lu",
+ seq_printf(seq, " %lu %lu %lu %lu %lu %lu %lu "
+ "%lu",
sd->lb_cnt[itype],
sd->lb_balanced[itype],
sd->lb_failed[itype],
sd->lb_nobusyq[itype],
sd->lb_nobusyg[itype]);
}
- seq_printf(seq, " %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu %lu\n",
+ seq_printf(seq, " %lu %lu %lu %lu %lu %lu %lu %lu %lu"
+ " %lu %lu %lu\n",
sd->alb_cnt, sd->alb_failed, sd->alb_pushed,
sd->sbe_cnt, sd->sbe_balanced, sd->sbe_pushed,
sd->sbf_cnt, sd->sbf_balanced, sd->sbf_pushed,
- sd->ttwu_wake_remote, sd->ttwu_move_affine, sd->ttwu_move_balance);
+ sd->ttwu_wake_remote, sd->ttwu_move_affine,
+ sd->ttwu_move_balance);
}
preempt_enable();
#endif
#endif
/*
- * rq_lock - lock a given runqueue and disable interrupts.
+ * this_rq_lock - lock this runqueue and disable interrupts.
*/
static inline struct rq *this_rq_lock(void)
__acquires(rq->lock)
{
unsigned long long now;
+ if (rt_task(p))
+ goto out;
+
now = sched_clock();
#ifdef CONFIG_SMP
if (!local) {
/* Compensate for drifting sched_clock */
struct rq *this_rq = this_rq();
- now = (now - this_rq->timestamp_last_tick)
- + rq->timestamp_last_tick;
+ now = (now - this_rq->most_recent_timestamp)
+ + rq->most_recent_timestamp;
}
#endif
(now - p->timestamp) >> 20);
}
- if (!rt_task(p))
- p->prio = recalc_task_prio(p, now);
+ p->prio = recalc_task_prio(p, now);
/*
* This checks to make sure it's not an uninterruptible task
}
}
p->timestamp = now;
-
+out:
__activate_task(p, rq);
}
if (this_sd->flags & SD_WAKE_AFFINE) {
unsigned long tl = this_load;
- unsigned long tl_per_task = cpu_avg_load_per_task(this_cpu);
+ unsigned long tl_per_task;
+
+ tl_per_task = cpu_avg_load_per_task(this_cpu);
/*
* If sync wakeup then subtract the (maximum possible)
* Not the local CPU - must adjust timestamp. This should
* get optimised away in the !CONFIG_SMP case.
*/
- p->timestamp = (p->timestamp - this_rq->timestamp_last_tick)
- + rq->timestamp_last_tick;
+ p->timestamp = (p->timestamp - this_rq->most_recent_timestamp)
+ + rq->most_recent_timestamp;
__activate_task(p, rq);
if (TASK_PREEMPTS_CURR(p, rq))
resched_task(rq->curr);
__acquires(rq1->lock)
__acquires(rq2->lock)
{
+ BUG_ON(!irqs_disabled());
if (rq1 == rq2) {
spin_lock(&rq1->lock);
__acquire(rq2->lock); /* Fake it out ;) */
__acquires(busiest->lock)
__acquires(this_rq->lock)
{
+ if (unlikely(!irqs_disabled())) {
+ /* printk() doesn't work good under rq->lock */
+ spin_unlock(&this_rq->lock);
+ BUG_ON(1);
+ }
if (unlikely(!spin_trylock(&busiest->lock))) {
if (busiest < this_rq) {
spin_unlock(&this_rq->lock);
set_task_cpu(p, this_cpu);
inc_nr_running(p, this_rq);
enqueue_task(p, this_array);
- p->timestamp = (p->timestamp - src_rq->timestamp_last_tick)
- + this_rq->timestamp_last_tick;
+ p->timestamp = (p->timestamp - src_rq->most_recent_timestamp)
+ + this_rq->most_recent_timestamp;
/*
* Note that idle threads have a prio of MAX_PRIO, for this test
* to be always true for them.
* 2) too many balance attempts have failed.
*/
- if (sd->nr_balance_failed > sd->cache_nice_tries)
+ if (sd->nr_balance_failed > sd->cache_nice_tries) {
+#ifdef CONFIG_SCHEDSTATS
+ if (task_hot(p, rq->most_recent_timestamp, sd))
+ schedstat_inc(sd, lb_hot_gained[idle]);
+#endif
return 1;
+ }
- if (task_hot(p, rq->timestamp_last_tick, sd))
+ if (task_hot(p, rq->most_recent_timestamp, sd))
return 0;
return 1;
}
goto skip_bitmap;
}
-#ifdef CONFIG_SCHEDSTATS
- if (task_hot(tmp, busiest->timestamp_last_tick, sd))
- schedstat_inc(sd, lb_hot_gained[idle]);
-#endif
-
pull_task(busiest, array, tmp, this_rq, dst_array, this_cpu);
pulled++;
rem_load_move -= tmp->load_weight;
static struct sched_group *
find_busiest_group(struct sched_domain *sd, int this_cpu,
unsigned long *imbalance, enum idle_type idle, int *sd_idle,
- cpumask_t *cpus)
+ cpumask_t *cpus, int *balance)
{
struct sched_group *busiest = NULL, *this = NULL, *group = sd->groups;
unsigned long max_load, avg_load, total_load, this_load, total_pwr;
unsigned long load, group_capacity;
int local_group;
int i;
+ unsigned int balance_cpu = -1, first_idle_cpu = 0;
unsigned long sum_nr_running, sum_weighted_load;
local_group = cpu_isset(this_cpu, group->cpumask);
+ if (local_group)
+ balance_cpu = first_cpu(group->cpumask);
+
/* Tally up the load of all CPUs in the group */
sum_weighted_load = sum_nr_running = avg_load = 0;
*sd_idle = 0;
/* Bias balancing toward cpus of our domain */
- if (local_group)
+ if (local_group) {
+ if (idle_cpu(i) && !first_idle_cpu) {
+ first_idle_cpu = 1;
+ balance_cpu = i;
+ }
+
load = target_load(i, load_idx);
- else
+ } else
load = source_load(i, load_idx);
avg_load += load;
sum_weighted_load += rq->raw_weighted_load;
}
+ /*
+ * First idle cpu or the first cpu(busiest) in this sched group
+ * is eligible for doing load balancing at this and above
+ * domains.
+ */
+ if (local_group && balance_cpu != this_cpu && balance) {
+ *balance = 0;
+ goto ret;
+ }
+
total_load += avg_load;
total_pwr += group->cpu_power;
pwr_now /= SCHED_LOAD_SCALE;
/* Amount of load we'd subtract */
- tmp = busiest_load_per_task*SCHED_LOAD_SCALE/busiest->cpu_power;
+ tmp = busiest_load_per_task * SCHED_LOAD_SCALE /
+ busiest->cpu_power;
if (max_load > tmp)
pwr_move += busiest->cpu_power *
min(busiest_load_per_task, max_load - tmp);
/* Amount of load we'd add */
- if (max_load*busiest->cpu_power <
- busiest_load_per_task*SCHED_LOAD_SCALE)
- tmp = max_load*busiest->cpu_power/this->cpu_power;
+ if (max_load * busiest->cpu_power <
+ busiest_load_per_task * SCHED_LOAD_SCALE)
+ tmp = max_load * busiest->cpu_power / this->cpu_power;
else
- tmp = busiest_load_per_task*SCHED_LOAD_SCALE/this->cpu_power;
- pwr_move += this->cpu_power*min(this_load_per_task, this_load + tmp);
+ tmp = busiest_load_per_task * SCHED_LOAD_SCALE /
+ this->cpu_power;
+ pwr_move += this->cpu_power *
+ min(this_load_per_task, this_load + tmp);
pwr_move /= SCHED_LOAD_SCALE;
/* Move if we gain throughput */
*imbalance = min_load_per_task;
return group_min;
}
-ret:
#endif
+ret:
*imbalance = 0;
return NULL;
}
/*
* Check this_cpu to ensure it is balanced within domain. Attempt to move
* tasks if there is an imbalance.
- *
- * Called with this_rq unlocked.
*/
static int load_balance(int this_cpu, struct rq *this_rq,
- struct sched_domain *sd, enum idle_type idle)
+ struct sched_domain *sd, enum idle_type idle,
+ int *balance)
{
int nr_moved, all_pinned = 0, active_balance = 0, sd_idle = 0;
struct sched_group *group;
unsigned long imbalance;
struct rq *busiest;
cpumask_t cpus = CPU_MASK_ALL;
+ unsigned long flags;
/*
* When power savings policy is enabled for the parent domain, idle
redo:
group = find_busiest_group(sd, this_cpu, &imbalance, idle, &sd_idle,
- &cpus);
+ &cpus, balance);
+
+ if (*balance == 0)
+ goto out_balanced;
+
if (!group) {
schedstat_inc(sd, lb_nobusyg[idle]);
goto out_balanced;
* still unbalanced. nr_moved simply stays zero, so it is
* correctly treated as an imbalance.
*/
+ local_irq_save(flags);
double_rq_lock(this_rq, busiest);
nr_moved = move_tasks(this_rq, this_cpu, busiest,
minus_1_or_zero(busiest->nr_running),
imbalance, sd, idle, &all_pinned);
double_rq_unlock(this_rq, busiest);
+ local_irq_restore(flags);
/* All tasks on this runqueue were pinned by CPU affinity */
if (unlikely(all_pinned)) {
if (unlikely(sd->nr_balance_failed > sd->cache_nice_tries+2)) {
- spin_lock(&busiest->lock);
+ spin_lock_irqsave(&busiest->lock, flags);
/* don't kick the migration_thread, if the curr
* task on busiest cpu can't be moved to this_cpu
*/
if (!cpu_isset(this_cpu, busiest->curr->cpus_allowed)) {
- spin_unlock(&busiest->lock);
+ spin_unlock_irqrestore(&busiest->lock, flags);
all_pinned = 1;
goto out_one_pinned;
}
busiest->push_cpu = this_cpu;
active_balance = 1;
}
- spin_unlock(&busiest->lock);
+ spin_unlock_irqrestore(&busiest->lock, flags);
if (active_balance)
wake_up_process(busiest->migration_thread);
schedstat_inc(sd, lb_cnt[NEWLY_IDLE]);
redo:
group = find_busiest_group(sd, this_cpu, &imbalance, NEWLY_IDLE,
- &sd_idle, &cpus);
+ &sd_idle, &cpus, NULL);
if (!group) {
schedstat_inc(sd, lb_nobusyg[NEWLY_IDLE]);
goto out_balanced;
static void idle_balance(int this_cpu, struct rq *this_rq)
{
struct sched_domain *sd;
+ int pulled_task = 0;
+ unsigned long next_balance = jiffies + 60 * HZ;
for_each_domain(this_cpu, sd) {
if (sd->flags & SD_BALANCE_NEWIDLE) {
/* If we've pulled tasks over stop searching: */
- if (load_balance_newidle(this_cpu, this_rq, sd))
+ pulled_task = load_balance_newidle(this_cpu,
+ this_rq, sd);
+ if (time_after(next_balance,
+ sd->last_balance + sd->balance_interval))
+ next_balance = sd->last_balance
+ + sd->balance_interval;
+ if (pulled_task)
break;
}
}
+ if (!pulled_task)
+ /*
+ * We are going idle. next_balance may be set based on
+ * a busy processor. So reset next_balance.
+ */
+ this_rq->next_balance = next_balance;
}
/*
spin_unlock(&target_rq->lock);
}
-/*
- * rebalance_tick will get called every timer tick, on every CPU.
- *
- * It checks each scheduling domain to see if it is due to be balanced,
- * and initiates a balancing operation if so.
- *
- * Balancing parameters are set up in arch_init_sched_domains.
- */
-
-/* Don't have all balancing operations going off at once: */
-static inline unsigned long cpu_offset(int cpu)
+static void update_load(struct rq *this_rq)
{
- return jiffies + cpu * HZ / NR_CPUS;
-}
-
-static void
-rebalance_tick(int this_cpu, struct rq *this_rq, enum idle_type idle)
-{
- unsigned long this_load, interval, j = cpu_offset(this_cpu);
- struct sched_domain *sd;
+ unsigned long this_load;
int i, scale;
this_load = this_rq->raw_weighted_load;
new_load += scale-1;
this_rq->cpu_load[i] = (old_load*(scale-1) + new_load) / scale;
}
+}
+
+/*
+ * run_rebalance_domains is triggered when needed from the scheduler tick.
+ *
+ * It checks each scheduling domain to see if it is due to be balanced,
+ * and initiates a balancing operation if so.
+ *
+ * Balancing parameters are set up in arch_init_sched_domains.
+ */
+static DEFINE_SPINLOCK(balancing);
+
+static void run_rebalance_domains(struct softirq_action *h)
+{
+ int this_cpu = smp_processor_id(), balance = 1;
+ struct rq *this_rq = cpu_rq(this_cpu);
+ unsigned long interval;
+ struct sched_domain *sd;
+ /*
+ * We are idle if there are no processes running. This
+ * is valid even if we are the idle process (SMT).
+ */
+ enum idle_type idle = !this_rq->nr_running ?
+ SCHED_IDLE : NOT_IDLE;
+ /* Earliest time when we have to call run_rebalance_domains again */
+ unsigned long next_balance = jiffies + 60*HZ;
for_each_domain(this_cpu, sd) {
if (!(sd->flags & SD_LOAD_BALANCE))
if (unlikely(!interval))
interval = 1;
- if (j - sd->last_balance >= interval) {
- if (load_balance(this_cpu, this_rq, sd, idle)) {
+ if (sd->flags & SD_SERIALIZE) {
+ if (!spin_trylock(&balancing))
+ goto out;
+ }
+
+ if (time_after_eq(jiffies, sd->last_balance + interval)) {
+ if (load_balance(this_cpu, this_rq, sd, idle, &balance)) {
/*
* We've pulled tasks over so either we're no
* longer idle, or one of our SMT siblings is
*/
idle = NOT_IDLE;
}
- sd->last_balance += interval;
+ sd->last_balance = jiffies;
}
+ if (sd->flags & SD_SERIALIZE)
+ spin_unlock(&balancing);
+out:
+ if (time_after(next_balance, sd->last_balance + interval))
+ next_balance = sd->last_balance + interval;
+
+ /*
+ * Stop the load balance at this level. There is another
+ * CPU in our sched group which is doing load balancing more
+ * actively.
+ */
+ if (!balance)
+ break;
}
+ this_rq->next_balance = next_balance;
}
#else
/*
* on UP we do not need to balance between CPUs:
*/
-static inline void rebalance_tick(int cpu, struct rq *rq, enum idle_type idle)
-{
-}
static inline void idle_balance(int cpu, struct rq *rq)
{
}
#endif
-static inline int wake_priority_sleeper(struct rq *rq)
+static inline void wake_priority_sleeper(struct rq *rq)
{
- int ret = 0;
-
#ifdef CONFIG_SCHED_SMT
+ if (!rq->nr_running)
+ return;
+
spin_lock(&rq->lock);
/*
* If an SMT sibling task has been put to sleep for priority
* reasons reschedule the idle task to see if it can now run.
*/
- if (rq->nr_running) {
+ if (rq->nr_running)
resched_task(rq->idle);
- ret = 1;
- }
spin_unlock(&rq->lock);
#endif
- return ret;
}
DEFINE_PER_CPU(struct kernel_stat, kstat);
static inline void
update_cpu_clock(struct task_struct *p, struct rq *rq, unsigned long long now)
{
- p->sched_time += now - max(p->timestamp, rq->timestamp_last_tick);
+ p->sched_time += now - p->last_ran;
+ p->last_ran = rq->most_recent_timestamp = now;
}
/*
unsigned long flags;
local_irq_save(flags);
- ns = max(p->timestamp, task_rq(p)->timestamp_last_tick);
- ns = p->sched_time + sched_clock() - ns;
+ ns = p->sched_time + sched_clock() - p->last_ran;
local_irq_restore(flags);
return ns;
cpustat->steal = cputime64_add(cpustat->steal, tmp);
}
-/*
- * This function gets called by the timer code, with HZ frequency.
- * We call it with interrupts disabled.
- *
- * It also gets called by the fork code, when changing the parent's
- * timeslices.
- */
-void scheduler_tick(void)
+static void task_running_tick(struct rq *rq, struct task_struct *p)
{
- unsigned long long now = sched_clock();
- struct task_struct *p = current;
- int cpu = smp_processor_id();
- struct rq *rq = cpu_rq(cpu);
-
- update_cpu_clock(p, rq, now);
-
- rq->timestamp_last_tick = now;
-
- if (p == rq->idle) {
- if (wake_priority_sleeper(rq))
- goto out;
- rebalance_tick(cpu, rq, SCHED_IDLE);
- return;
- }
-
- /* Task might have expired already, but not scheduled off yet */
if (p->array != rq->active) {
+ /* Task has expired but was not scheduled yet */
set_tsk_need_resched(p);
- goto out;
+ return;
}
spin_lock(&rq->lock);
/*
}
out_unlock:
spin_unlock(&rq->lock);
-out:
- rebalance_tick(cpu, rq, NOT_IDLE);
+}
+
+/*
+ * This function gets called by the timer code, with HZ frequency.
+ * We call it with interrupts disabled.
+ *
+ * It also gets called by the fork code, when changing the parent's
+ * timeslices.
+ */
+void scheduler_tick(void)
+{
+ unsigned long long now = sched_clock();
+ struct task_struct *p = current;
+ int cpu = smp_processor_id();
+ struct rq *rq = cpu_rq(cpu);
+
+ update_cpu_clock(p, rq, now);
+
+ if (p == rq->idle)
+ /* Task on the idle queue */
+ wake_priority_sleeper(rq);
+ else
+ task_running_tick(rq, p);
+#ifdef CONFIG_SMP
+ update_load(rq);
+ if (time_after_eq(jiffies, rq->next_balance))
+ raise_softirq(SCHED_SOFTIRQ);
+#endif
}
#ifdef CONFIG_SCHED_SMT
/*
* Spinlock count overflowing soon?
*/
- DEBUG_LOCKS_WARN_ON((preempt_count() & PREEMPT_MASK) >= PREEMPT_MASK-10);
+ DEBUG_LOCKS_WARN_ON((preempt_count() & PREEMPT_MASK) >=
+ PREEMPT_MASK - 10);
}
EXPORT_SYMBOL(add_preempt_count);
"%s/0x%08x/%d\n",
current->comm, preempt_count(), current->pid);
debug_show_held_locks(current);
+ if (irqs_disabled())
+ print_irqtrace_events(current);
dump_stack();
}
profile_hit(SCHED_PROFILING, __builtin_return_address(0));
* afterwards, and pretending it was a local activate.
* This way is cleaner and logically correct.
*/
- p->timestamp = p->timestamp - rq_src->timestamp_last_tick
- + rq_dest->timestamp_last_tick;
+ p->timestamp = p->timestamp - rq_src->most_recent_timestamp
+ + rq_dest->most_recent_timestamp;
deactivate_task(p, rq_src);
__activate_task(p, rq_dest);
if (TASK_PREEMPTS_CURR(p, rq_dest))
}
#ifdef CONFIG_HOTPLUG_CPU
-/* Figure out where task on dead CPU should go, use force if neccessary. */
+/*
+ * Figure out where task on dead CPU should go, use force if neccessary.
+ * NOTE: interrupts should be disabled by the caller
+ */
static void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p)
{
unsigned long flags;
mmdrop(mm);
}
+/* called under rq->lock with disabled interrupts */
static void migrate_dead(unsigned int dead_cpu, struct task_struct *p)
{
struct rq *rq = cpu_rq(dead_cpu);
* Drop lock around migration; if someone else moves it,
* that's OK. No task can be added to this CPU, so iteration is
* fine.
+ * NOTE: interrupts should be left disabled --dev@
*/
- spin_unlock_irq(&rq->lock);
+ spin_unlock(&rq->lock);
move_task_off_dead_cpu(dead_cpu, p);
- spin_lock_irq(&rq->lock);
+ spin_lock(&rq->lock);
put_task_struct(p);
}
if (!(sd->flags & SD_LOAD_BALANCE)) {
printk("does not load-balance\n");
if (sd->parent)
- printk(KERN_ERR "ERROR: !SD_LOAD_BALANCE domain has parent");
+ printk(KERN_ERR "ERROR: !SD_LOAD_BALANCE domain"
+ " has parent");
break;
}
printk("span %s\n", str);
if (!cpu_isset(cpu, sd->span))
- printk(KERN_ERR "ERROR: domain->span does not contain CPU%d\n", cpu);
+ printk(KERN_ERR "ERROR: domain->span does not contain "
+ "CPU%d\n", cpu);
if (!cpu_isset(cpu, group->cpumask))
- printk(KERN_ERR "ERROR: domain->groups does not contain CPU%d\n", cpu);
+ printk(KERN_ERR "ERROR: domain->groups does not contain"
+ " CPU%d\n", cpu);
printk(KERN_DEBUG);
for (i = 0; i < level + 2; i++)
if (!group->cpu_power) {
printk("\n");
- printk(KERN_ERR "ERROR: domain->cpu_power not set\n");
+ printk(KERN_ERR "ERROR: domain->cpu_power not "
+ "set\n");
}
if (!cpus_weight(group->cpumask)) {
printk("\n");
if (!cpus_equal(sd->span, groupmask))
- printk(KERN_ERR "ERROR: groups don't span domain->span\n");
+ printk(KERN_ERR "ERROR: groups don't span "
+ "domain->span\n");
level++;
sd = sd->parent;
+ if (!sd)
+ continue;
- if (sd) {
- if (!cpus_subset(groupmask, sd->span))
- printk(KERN_ERR "ERROR: parent span is not a superset of domain->span\n");
- }
+ if (!cpus_subset(groupmask, sd->span))
+ printk(KERN_ERR "ERROR: parent span is not a superset "
+ "of domain->span\n");
} while (sd);
}
__setup ("isolcpus=", isolated_cpu_setup);
/*
- * init_sched_build_groups takes an array of groups, the cpumask we wish
- * to span, and a pointer to a function which identifies what group a CPU
- * belongs to. The return value of group_fn must be a valid index into the
- * groups[] array, and must be >= 0 and < NR_CPUS (due to the fact that we
- * keep track of groups covered with a cpumask_t).
+ * init_sched_build_groups takes the cpumask we wish to span, and a pointer
+ * to a function which identifies what group(along with sched group) a CPU
+ * belongs to. The return value of group_fn must be a >= 0 and < NR_CPUS
+ * (due to the fact that we keep track of groups covered with a cpumask_t).
*
* init_sched_build_groups will build a circular linked list of the groups
* covered by the given span, and will set each group's ->cpumask correctly,
* and ->cpu_power to 0.
*/
static void
-init_sched_build_groups(struct sched_group groups[], cpumask_t span,
- const cpumask_t *cpu_map,
- int (*group_fn)(int cpu, const cpumask_t *cpu_map))
+init_sched_build_groups(cpumask_t span, const cpumask_t *cpu_map,
+ int (*group_fn)(int cpu, const cpumask_t *cpu_map,
+ struct sched_group **sg))
{
struct sched_group *first = NULL, *last = NULL;
cpumask_t covered = CPU_MASK_NONE;
int i;
for_each_cpu_mask(i, span) {
- int group = group_fn(i, cpu_map);
- struct sched_group *sg = &groups[group];
+ struct sched_group *sg;
+ int group = group_fn(i, cpu_map, &sg);
int j;
if (cpu_isset(i, covered))
sg->cpu_power = 0;
for_each_cpu_mask(j, span) {
- if (group_fn(j, cpu_map) != group)
+ if (group_fn(j, cpu_map, NULL) != group)
continue;
cpu_set(j, covered);
*/
static void touch_cache(void *__cache, unsigned long __size)
{
- unsigned long size = __size/sizeof(long), chunk1 = size/3,
- chunk2 = 2*size/3;
+ unsigned long size = __size / sizeof(long);
+ unsigned long chunk1 = size / 3;
+ unsigned long chunk2 = 2 * size / 3;
unsigned long *cache = __cache;
int i;
*/
measure_one(cache, size, cpu1, cpu2);
for (i = 0; i < ITERATIONS; i++)
- cost1 += measure_one(cache, size - i*1024, cpu1, cpu2);
+ cost1 += measure_one(cache, size - i * 1024, cpu1, cpu2);
measure_one(cache, size, cpu2, cpu1);
for (i = 0; i < ITERATIONS; i++)
- cost1 += measure_one(cache, size - i*1024, cpu2, cpu1);
+ cost1 += measure_one(cache, size - i * 1024, cpu2, cpu1);
/*
* (We measure the non-migrating [cached] cost on both
measure_one(cache, size, cpu1, cpu1);
for (i = 0; i < ITERATIONS; i++)
- cost2 += measure_one(cache, size - i*1024, cpu1, cpu1);
+ cost2 += measure_one(cache, size - i * 1024, cpu1, cpu1);
measure_one(cache, size, cpu2, cpu2);
for (i = 0; i < ITERATIONS; i++)
- cost2 += measure_one(cache, size - i*1024, cpu2, cpu2);
+ cost2 += measure_one(cache, size - i * 1024, cpu2, cpu2);
/*
* Get the per-iteration migration cost:
*/
- do_div(cost1, 2*ITERATIONS);
- do_div(cost2, 2*ITERATIONS);
+ do_div(cost1, 2 * ITERATIONS);
+ do_div(cost2, 2 * ITERATIONS);
return cost1 - cost2;
}
*/
cache = vmalloc(max_size);
if (!cache) {
- printk("could not vmalloc %d bytes for cache!\n", 2*max_size);
+ printk("could not vmalloc %d bytes for cache!\n", 2 * max_size);
return 1000000; /* return 1 msec on very small boxen */
}
avg_fluct = (avg_fluct + fluct)/2;
if (migration_debug)
- printk("-> [%d][%d][%7d] %3ld.%ld [%3ld.%ld] (%ld): (%8Ld %8Ld)\n",
+ printk("-> [%d][%d][%7d] %3ld.%ld [%3ld.%ld] (%ld): "
+ "(%8Ld %8Ld)\n",
cpu1, cpu2, size,
(long)cost / 1000000,
((long)cost / 100000) % 10,
-1
#endif
);
- if (system_state == SYSTEM_BOOTING) {
- if (num_online_cpus() > 1) {
- printk("migration_cost=");
- for (distance = 0; distance <= max_distance; distance++) {
- if (distance)
- printk(",");
- printk("%ld", (long)migration_cost[distance] / 1000);
- }
- printk("\n");
+ if (system_state == SYSTEM_BOOTING && num_online_cpus() > 1) {
+ printk("migration_cost=");
+ for (distance = 0; distance <= max_distance; distance++) {
+ if (distance)
+ printk(",");
+ printk("%ld", (long)migration_cost[distance] / 1000);
}
+ printk("\n");
}
j1 = jiffies;
if (migration_debug)
- printk("migration: %ld seconds\n", (j1-j0)/HZ);
+ printk("migration: %ld seconds\n", (j1-j0) / HZ);
/*
* Move back to the original CPU. NUMA-Q gets confused
*/
#ifdef CONFIG_SCHED_SMT
static DEFINE_PER_CPU(struct sched_domain, cpu_domains);
-static struct sched_group sched_group_cpus[NR_CPUS];
+static DEFINE_PER_CPU(struct sched_group, sched_group_cpus);
-static int cpu_to_cpu_group(int cpu, const cpumask_t *cpu_map)
+static int cpu_to_cpu_group(int cpu, const cpumask_t *cpu_map,
+ struct sched_group **sg)
{
+ if (sg)
+ *sg = &per_cpu(sched_group_cpus, cpu);
return cpu;
}
#endif
*/
#ifdef CONFIG_SCHED_MC
static DEFINE_PER_CPU(struct sched_domain, core_domains);
-static struct sched_group sched_group_core[NR_CPUS];
+static DEFINE_PER_CPU(struct sched_group, sched_group_core);
#endif
#if defined(CONFIG_SCHED_MC) && defined(CONFIG_SCHED_SMT)
-static int cpu_to_core_group(int cpu, const cpumask_t *cpu_map)
+static int cpu_to_core_group(int cpu, const cpumask_t *cpu_map,
+ struct sched_group **sg)
{
+ int group;
cpumask_t mask = cpu_sibling_map[cpu];
cpus_and(mask, mask, *cpu_map);
- return first_cpu(mask);
+ group = first_cpu(mask);
+ if (sg)
+ *sg = &per_cpu(sched_group_core, group);
+ return group;
}
#elif defined(CONFIG_SCHED_MC)
-static int cpu_to_core_group(int cpu, const cpumask_t *cpu_map)
+static int cpu_to_core_group(int cpu, const cpumask_t *cpu_map,
+ struct sched_group **sg)
{
+ if (sg)
+ *sg = &per_cpu(sched_group_core, cpu);
return cpu;
}
#endif
static DEFINE_PER_CPU(struct sched_domain, phys_domains);
-static struct sched_group sched_group_phys[NR_CPUS];
+static DEFINE_PER_CPU(struct sched_group, sched_group_phys);
-static int cpu_to_phys_group(int cpu, const cpumask_t *cpu_map)
+static int cpu_to_phys_group(int cpu, const cpumask_t *cpu_map,
+ struct sched_group **sg)
{
+ int group;
#ifdef CONFIG_SCHED_MC
cpumask_t mask = cpu_coregroup_map(cpu);
cpus_and(mask, mask, *cpu_map);
- return first_cpu(mask);
+ group = first_cpu(mask);
#elif defined(CONFIG_SCHED_SMT)
cpumask_t mask = cpu_sibling_map[cpu];
cpus_and(mask, mask, *cpu_map);
- return first_cpu(mask);
+ group = first_cpu(mask);
#else
- return cpu;
+ group = cpu;
#endif
+ if (sg)
+ *sg = &per_cpu(sched_group_phys, group);
+ return group;
}
#ifdef CONFIG_NUMA
static struct sched_group **sched_group_nodes_bycpu[NR_CPUS];
static DEFINE_PER_CPU(struct sched_domain, allnodes_domains);
-static struct sched_group *sched_group_allnodes_bycpu[NR_CPUS];
+static DEFINE_PER_CPU(struct sched_group, sched_group_allnodes);
-static int cpu_to_allnodes_group(int cpu, const cpumask_t *cpu_map)
+static int cpu_to_allnodes_group(int cpu, const cpumask_t *cpu_map,
+ struct sched_group **sg)
{
- return cpu_to_node(cpu);
+ cpumask_t nodemask = node_to_cpumask(cpu_to_node(cpu));
+ int group;
+
+ cpus_and(nodemask, nodemask, *cpu_map);
+ group = first_cpu(nodemask);
+
+ if (sg)
+ *sg = &per_cpu(sched_group_allnodes, group);
+ return group;
}
+
static void init_numa_sched_groups_power(struct sched_group *group_head)
{
struct sched_group *sg = group_head;
int cpu, i;
for_each_cpu_mask(cpu, *cpu_map) {
- struct sched_group *sched_group_allnodes
- = sched_group_allnodes_bycpu[cpu];
struct sched_group **sched_group_nodes
= sched_group_nodes_bycpu[cpu];
- if (sched_group_allnodes) {
- kfree(sched_group_allnodes);
- sched_group_allnodes_bycpu[cpu] = NULL;
- }
-
if (!sched_group_nodes)
continue;
struct sched_domain *sd;
#ifdef CONFIG_NUMA
struct sched_group **sched_group_nodes = NULL;
- struct sched_group *sched_group_allnodes = NULL;
+ int sd_allnodes = 0;
/*
* Allocate the per-node list of sched groups
* Set up domains for cpus specified by the cpu_map.
*/
for_each_cpu_mask(i, *cpu_map) {
- int group;
struct sched_domain *sd = NULL, *p;
cpumask_t nodemask = node_to_cpumask(cpu_to_node(i));
#ifdef CONFIG_NUMA
if (cpus_weight(*cpu_map)
> SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) {
- if (!sched_group_allnodes) {
- sched_group_allnodes
- = kmalloc_node(sizeof(struct sched_group)
- * MAX_NUMNODES,
- GFP_KERNEL,
- cpu_to_node(i));
- if (!sched_group_allnodes) {
- printk(KERN_WARNING
- "Can not alloc allnodes sched group\n");
- goto error;
- }
- sched_group_allnodes_bycpu[i]
- = sched_group_allnodes;
- }
sd = &per_cpu(allnodes_domains, i);
*sd = SD_ALLNODES_INIT;
sd->span = *cpu_map;
- group = cpu_to_allnodes_group(i, cpu_map);
- sd->groups = &sched_group_allnodes[group];
+ cpu_to_allnodes_group(i, cpu_map, &sd->groups);
p = sd;
+ sd_allnodes = 1;
} else
p = NULL;
p = sd;
sd = &per_cpu(phys_domains, i);
- group = cpu_to_phys_group(i, cpu_map);
*sd = SD_CPU_INIT;
sd->span = nodemask;
sd->parent = p;
if (p)
p->child = sd;
- sd->groups = &sched_group_phys[group];
+ cpu_to_phys_group(i, cpu_map, &sd->groups);
#ifdef CONFIG_SCHED_MC
p = sd;
sd = &per_cpu(core_domains, i);
- group = cpu_to_core_group(i, cpu_map);
*sd = SD_MC_INIT;
sd->span = cpu_coregroup_map(i);
cpus_and(sd->span, sd->span, *cpu_map);
sd->parent = p;
p->child = sd;
- sd->groups = &sched_group_core[group];
+ cpu_to_core_group(i, cpu_map, &sd->groups);
#endif
#ifdef CONFIG_SCHED_SMT
p = sd;
sd = &per_cpu(cpu_domains, i);
- group = cpu_to_cpu_group(i, cpu_map);
*sd = SD_SIBLING_INIT;
sd->span = cpu_sibling_map[i];
cpus_and(sd->span, sd->span, *cpu_map);
sd->parent = p;
p->child = sd;
- sd->groups = &sched_group_cpus[group];
+ cpu_to_cpu_group(i, cpu_map, &sd->groups);
#endif
}
if (i != first_cpu(this_sibling_map))
continue;
- init_sched_build_groups(sched_group_cpus, this_sibling_map,
- cpu_map, &cpu_to_cpu_group);
+ init_sched_build_groups(this_sibling_map, cpu_map, &cpu_to_cpu_group);
}
#endif
cpus_and(this_core_map, this_core_map, *cpu_map);
if (i != first_cpu(this_core_map))
continue;
- init_sched_build_groups(sched_group_core, this_core_map,
- cpu_map, &cpu_to_core_group);
+ init_sched_build_groups(this_core_map, cpu_map, &cpu_to_core_group);
}
#endif
if (cpus_empty(nodemask))
continue;
- init_sched_build_groups(sched_group_phys, nodemask,
- cpu_map, &cpu_to_phys_group);
+ init_sched_build_groups(nodemask, cpu_map, &cpu_to_phys_group);
}
#ifdef CONFIG_NUMA
/* Set up node groups */
- if (sched_group_allnodes)
- init_sched_build_groups(sched_group_allnodes, *cpu_map,
- cpu_map, &cpu_to_allnodes_group);
+ if (sd_allnodes)
+ init_sched_build_groups(*cpu_map, cpu_map, &cpu_to_allnodes_group);
for (i = 0; i < MAX_NUMNODES; i++) {
/* Set up node groups */
for (i = 0; i < MAX_NUMNODES; i++)
init_numa_sched_groups_power(sched_group_nodes[i]);
- if (sched_group_allnodes) {
- int group = cpu_to_allnodes_group(first_cpu(*cpu_map), cpu_map);
- struct sched_group *sg = &sched_group_allnodes[group];
+ if (sd_allnodes) {
+ struct sched_group *sg;
+ cpu_to_allnodes_group(first_cpu(*cpu_map), cpu_map, &sg);
init_numa_sched_groups_power(sg);
}
#endif
set_load_weight(&init_task);
+#ifdef CONFIG_SMP
+ open_softirq(SCHED_SOFTIRQ, run_rebalance_domains, NULL);
+#endif
+
#ifdef CONFIG_RT_MUTEXES
plist_head_init(&init_task.pi_waiters, &init_task.pi_lock);
#endif
printk("in_atomic():%d, irqs_disabled():%d\n",
in_atomic(), irqs_disabled());
debug_show_held_locks(current);
+ if (irqs_disabled())
+ print_irqtrace_events(current);
dump_stack();
}
#endif
#include <linux/signal.h>
#include <linux/capability.h>
#include <linux/freezer.h>
+#include <linux/pid_namespace.h>
+#include <linux/nsproxy.h>
+
#include <asm/param.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
error = -EPERM;
if ((info == SEND_SIG_NOINFO || (!is_si_special(info) && SI_FROMUSER(info)))
&& ((sig != SIGCONT) ||
- (current->signal->session != t->signal->session))
+ (process_session(current) != process_session(t)))
&& (current->euid ^ t->suid) && (current->euid ^ t->uid)
&& (current->uid ^ t->suid) && (current->uid ^ t->uid)
&& !capable(CAP_KILL))
read_unlock(&tasklist_lock);
}
- schedule();
+ do {
+ schedule();
+ } while (try_to_freeze());
/*
* Now we don't run again until continued.
*/
if (sig_kernel_ignore(signr)) /* Default is nothing. */
continue;
- /* Init gets no signals it doesn't want. */
- if (current == child_reaper)
+ /*
+ * Init of a pid space gets no signals it doesn't want from
+ * within that pid space. It can of course get signals from
+ * its parent pid space.
+ */
+ if (current == child_reaper(current))
continue;
if (sig_kernel_stop(signr)) {
if (p->real_parent == group_leader) {
err = -EPERM;
- if (p->signal->session != group_leader->signal->session)
+ if (process_session(p) != process_session(group_leader))
goto out;
err = -EACCES;
if (p->did_exec)
goto out;
if (pgid != pid) {
- struct task_struct *p;
+ struct task_struct *g =
+ find_task_by_pid_type(PIDTYPE_PGID, pgid);
- do_each_task_pid(pgid, PIDTYPE_PGID, p) {
- if (p->signal->session == group_leader->signal->session)
- goto ok_pgid;
- } while_each_task_pid(pgid, PIDTYPE_PGID, p);
- goto out;
+ if (!g || process_session(g) != process_session(group_leader))
+ goto out;
}
-ok_pgid:
err = security_task_setpgid(p, pgid);
if (err)
goto out;
asmlinkage long sys_getsid(pid_t pid)
{
if (!pid)
- return current->signal->session;
+ return process_session(current);
else {
int retval;
struct task_struct *p;
if (p) {
retval = security_task_getsid(p);
if (!retval)
- retval = p->signal->session;
+ retval = process_session(p);
}
read_unlock(&tasklist_lock);
return retval;
pid_t session;
int err = -EPERM;
- mutex_lock(&tty_mutex);
write_lock_irq(&tasklist_lock);
/* Fail if I am already a session leader */
group_leader->signal->leader = 1;
__set_special_pids(session, session);
+
+ spin_lock(&group_leader->sighand->siglock);
group_leader->signal->tty = NULL;
group_leader->signal->tty_old_pgrp = 0;
+ spin_unlock(&group_leader->sighand->siglock);
+
err = process_group(group_leader);
out:
write_unlock_irq(&tasklist_lock);
- mutex_unlock(&tty_mutex);
return err;
}
extern int sysctl_overcommit_ratio;
extern int sysctl_panic_on_oom;
extern int max_threads;
-extern int sysrq_enabled;
extern int core_uses_pid;
extern int suid_dumpable;
extern char core_pattern[];
extern int sg_big_buff;
#endif
#ifdef CONFIG_SYSVIPC
-static int proc_do_ipc_string(ctl_table *table, int write, struct file *filp,
+static int proc_ipc_dointvec(ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos);
+static int proc_ipc_doulongvec_minmax(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
#endif
#ifdef CONFIG_SYSCTL_SYSCALL
static int parse_table(int __user *, int, void __user *, size_t __user *,
- void __user *, size_t, ctl_table *, void **);
+ void __user *, size_t, ctl_table *);
#endif
static int proc_do_uts_string(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
+static int sysctl_uts_string(ctl_table *table, int __user *name, int nlen,
+ void __user *oldval, size_t __user *oldlenp,
+ void __user *newval, size_t newlen);
+
+#ifdef CONFIG_SYSVIPC
+static int sysctl_ipc_data(ctl_table *table, int __user *name, int nlen,
+ void __user *oldval, size_t __user *oldlenp,
+ void __user *newval, size_t newlen);
+#endif
+
#ifdef CONFIG_PROC_SYSCTL
static int proc_do_cad_pid(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
int sysctl_legacy_va_layout;
#endif
+static void *get_uts(ctl_table *table, int write)
+{
+ char *which = table->data;
+#ifdef CONFIG_UTS_NS
+ struct uts_namespace *uts_ns = current->nsproxy->uts_ns;
+ which = (which - (char *)&init_uts_ns) + (char *)uts_ns;
+#endif
+ if (!write)
+ down_read(&uts_sem);
+ else
+ down_write(&uts_sem);
+ return which;
+}
+
+static void put_uts(ctl_table *table, int write, void *which)
+{
+ if (!write)
+ up_read(&uts_sem);
+ else
+ up_write(&uts_sem);
+}
+
+#ifdef CONFIG_SYSVIPC
+static void *get_ipc(ctl_table *table, int write)
+{
+ char *which = table->data;
+ struct ipc_namespace *ipc_ns = current->nsproxy->ipc_ns;
+ which = (which - (char *)&init_ipc_ns) + (char *)ipc_ns;
+ return which;
+}
+#else
+#define get_ipc(T,W) ((T)->data)
+#endif
+
/* /proc declarations: */
#ifdef CONFIG_PROC_SYSCTL
};
static ctl_table kern_table[] = {
-#ifndef CONFIG_UTS_NS
{
.ctl_name = KERN_OSTYPE,
.procname = "ostype",
.maxlen = sizeof(init_uts_ns.name.sysname),
.mode = 0444,
.proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
+ .strategy = &sysctl_uts_string,
},
{
.ctl_name = KERN_OSRELEASE,
.maxlen = sizeof(init_uts_ns.name.release),
.mode = 0444,
.proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
+ .strategy = &sysctl_uts_string,
},
{
.ctl_name = KERN_VERSION,
.maxlen = sizeof(init_uts_ns.name.version),
.mode = 0444,
.proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
+ .strategy = &sysctl_uts_string,
},
{
.ctl_name = KERN_NODENAME,
.maxlen = sizeof(init_uts_ns.name.nodename),
.mode = 0644,
.proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
+ .strategy = &sysctl_uts_string,
},
{
.ctl_name = KERN_DOMAINNAME,
.maxlen = sizeof(init_uts_ns.name.domainname),
.mode = 0644,
.proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
- },
-#else /* !CONFIG_UTS_NS */
- {
- .ctl_name = KERN_OSTYPE,
- .procname = "ostype",
- .data = NULL,
- /* could maybe use __NEW_UTS_LEN here? */
- .maxlen = FIELD_SIZEOF(struct new_utsname, sysname),
- .mode = 0444,
- .proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
- },
- {
- .ctl_name = KERN_OSRELEASE,
- .procname = "osrelease",
- .data = NULL,
- .maxlen = FIELD_SIZEOF(struct new_utsname, release),
- .mode = 0444,
- .proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
- },
- {
- .ctl_name = KERN_VERSION,
- .procname = "version",
- .data = NULL,
- .maxlen = FIELD_SIZEOF(struct new_utsname, version),
- .mode = 0444,
- .proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
- },
- {
- .ctl_name = KERN_NODENAME,
- .procname = "hostname",
- .data = NULL,
- .maxlen = FIELD_SIZEOF(struct new_utsname, nodename),
- .mode = 0644,
- .proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
- },
- {
- .ctl_name = KERN_DOMAINNAME,
- .procname = "domainname",
- .data = NULL,
- .maxlen = FIELD_SIZEOF(struct new_utsname, domainname),
- .mode = 0644,
- .proc_handler = &proc_do_uts_string,
- .strategy = &sysctl_string,
+ .strategy = &sysctl_uts_string,
},
-#endif /* !CONFIG_UTS_NS */
{
.ctl_name = KERN_PANIC,
.procname = "panic",
{
.ctl_name = KERN_SHMMAX,
.procname = "shmmax",
- .data = NULL,
- .maxlen = sizeof (size_t),
+ .data = &init_ipc_ns.shm_ctlmax,
+ .maxlen = sizeof (init_ipc_ns.shm_ctlmax),
.mode = 0644,
- .proc_handler = &proc_do_ipc_string,
+ .proc_handler = &proc_ipc_doulongvec_minmax,
+ .strategy = sysctl_ipc_data,
},
{
.ctl_name = KERN_SHMALL,
.procname = "shmall",
- .data = NULL,
- .maxlen = sizeof (size_t),
+ .data = &init_ipc_ns.shm_ctlall,
+ .maxlen = sizeof (init_ipc_ns.shm_ctlall),
.mode = 0644,
- .proc_handler = &proc_do_ipc_string,
+ .proc_handler = &proc_ipc_doulongvec_minmax,
+ .strategy = sysctl_ipc_data,
},
{
.ctl_name = KERN_SHMMNI,
.procname = "shmmni",
- .data = NULL,
- .maxlen = sizeof (int),
+ .data = &init_ipc_ns.shm_ctlmni,
+ .maxlen = sizeof (init_ipc_ns.shm_ctlmni),
.mode = 0644,
- .proc_handler = &proc_do_ipc_string,
+ .proc_handler = &proc_ipc_dointvec,
+ .strategy = sysctl_ipc_data,
},
{
.ctl_name = KERN_MSGMAX,
.procname = "msgmax",
- .data = NULL,
- .maxlen = sizeof (int),
+ .data = &init_ipc_ns.msg_ctlmax,
+ .maxlen = sizeof (init_ipc_ns.msg_ctlmax),
.mode = 0644,
- .proc_handler = &proc_do_ipc_string,
+ .proc_handler = &proc_ipc_dointvec,
+ .strategy = sysctl_ipc_data,
},
{
.ctl_name = KERN_MSGMNI,
.procname = "msgmni",
- .data = NULL,
- .maxlen = sizeof (int),
+ .data = &init_ipc_ns.msg_ctlmni,
+ .maxlen = sizeof (init_ipc_ns.msg_ctlmni),
.mode = 0644,
- .proc_handler = &proc_do_ipc_string,
+ .proc_handler = &proc_ipc_dointvec,
+ .strategy = sysctl_ipc_data,
},
{
.ctl_name = KERN_MSGMNB,
.procname = "msgmnb",
- .data = NULL,
- .maxlen = sizeof (int),
+ .data = &init_ipc_ns.msg_ctlmnb,
+ .maxlen = sizeof (init_ipc_ns.msg_ctlmnb),
.mode = 0644,
- .proc_handler = &proc_do_ipc_string,
+ .proc_handler = &proc_ipc_dointvec,
+ .strategy = sysctl_ipc_data,
},
{
.ctl_name = KERN_SEM,
.procname = "sem",
- .data = NULL,
+ .data = &init_ipc_ns.sem_ctls,
.maxlen = 4*sizeof (int),
.mode = 0644,
- .proc_handler = &proc_do_ipc_string,
+ .proc_handler = &proc_ipc_dointvec,
+ .strategy = sysctl_ipc_data,
},
#endif
#ifdef CONFIG_MAGIC_SYSRQ
{
.ctl_name = KERN_SYSRQ,
.procname = "sysrq",
- .data = &sysrq_enabled,
+ .data = &__sysrq_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
do {
struct ctl_table_header *head =
list_entry(tmp, struct ctl_table_header, ctl_entry);
- void *context = NULL;
if (!use_table(head))
continue;
spin_unlock(&sysctl_lock);
error = parse_table(name, nlen, oldval, oldlenp,
- newval, newlen, head->ctl_table,
- &context);
- kfree(context);
+ newval, newlen, head->ctl_table);
spin_lock(&sysctl_lock);
unuse_table(head);
static int parse_table(int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen,
- ctl_table *table, void **context)
+ ctl_table *table)
{
int n;
repeat:
error = table->strategy(
table, name, nlen,
oldval, oldlenp,
- newval, newlen, context);
+ newval, newlen);
if (error)
return error;
}
}
error = do_sysctl_strategy(table, name, nlen,
oldval, oldlenp,
- newval, newlen, context);
+ newval, newlen);
return error;
}
}
int do_sysctl_strategy (ctl_table *table,
int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
int op = 0, rc;
size_t len;
if (table->strategy) {
rc = table->strategy(table, name, nlen, oldval, oldlenp,
- newval, newlen, context);
+ newval, newlen);
if (rc < 0)
return rc;
if (rc > 0)
size_t count, loff_t *ppos)
{
int op;
- struct proc_dir_entry *de = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *de = PDE(file->f_path.dentry->d_inode);
struct ctl_table *table;
size_t res;
ssize_t error = -ENOTDIR;
* Special case of dostring for the UTS structure. This has locks
* to observe. Should this be in kernel/sys.c ????
*/
-
-#ifndef CONFIG_UTS_NS
-static int proc_do_uts_string(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- int r;
- if (!write) {
- down_read(&uts_sem);
- r=proc_dostring(table,0,filp,buffer,lenp, ppos);
- up_read(&uts_sem);
- } else {
- down_write(&uts_sem);
- r=proc_dostring(table,1,filp,buffer,lenp, ppos);
- up_write(&uts_sem);
- }
- return r;
-}
-#else /* !CONFIG_UTS_NS */
static int proc_do_uts_string(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- struct uts_namespace* uts_ns = current->nsproxy->uts_ns;
- char* which;
-
- switch (table->ctl_name) {
- case KERN_OSTYPE:
- which = uts_ns->name.sysname;
- break;
- case KERN_NODENAME:
- which = uts_ns->name.nodename;
- break;
- case KERN_OSRELEASE:
- which = uts_ns->name.release;
- break;
- case KERN_VERSION:
- which = uts_ns->name.version;
- break;
- case KERN_DOMAINNAME:
- which = uts_ns->name.domainname;
- break;
- default:
- r = -EINVAL;
- goto out;
- }
-
- if (!write) {
- down_read(&uts_sem);
- r=_proc_do_string(which,table->maxlen,0,filp,buffer,lenp, ppos);
- up_read(&uts_sem);
- } else {
- down_write(&uts_sem);
- r=_proc_do_string(which,table->maxlen,1,filp,buffer,lenp, ppos);
- up_write(&uts_sem);
- }
- out:
+ void *which;
+ which = get_uts(table, write);
+ r = _proc_do_string(which, table->maxlen,write,filp,buffer,lenp, ppos);
+ put_uts(table, write, which);
return r;
}
-#endif /* !CONFIG_UTS_NS */
static int do_proc_dointvec_conv(int *negp, unsigned long *lvalp,
int *valp,
#define OP_SET 0
#define OP_AND 1
-#define OP_OR 2
-#define OP_MAX 3
-#define OP_MIN 4
static int do_proc_dointvec_bset_conv(int *negp, unsigned long *lvalp,
int *valp,
switch(op) {
case OP_SET: *valp = val; break;
case OP_AND: *valp &= val; break;
- case OP_OR: *valp |= val; break;
- case OP_MAX: if(*valp < val)
- *valp = val;
- break;
- case OP_MIN: if(*valp > val)
- *valp = val;
- break;
}
} else {
int val = *valp;
}
#ifdef CONFIG_SYSVIPC
-static int proc_do_ipc_string(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
+static int proc_ipc_dointvec(ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
- void *data;
- struct ipc_namespace *ns;
-
- ns = current->nsproxy->ipc_ns;
-
- switch (table->ctl_name) {
- case KERN_SHMMAX:
- data = &ns->shm_ctlmax;
- goto proc_minmax;
- case KERN_SHMALL:
- data = &ns->shm_ctlall;
- goto proc_minmax;
- case KERN_SHMMNI:
- data = &ns->shm_ctlmni;
- break;
- case KERN_MSGMAX:
- data = &ns->msg_ctlmax;
- break;
- case KERN_MSGMNI:
- data = &ns->msg_ctlmni;
- break;
- case KERN_MSGMNB:
- data = &ns->msg_ctlmnb;
- break;
- case KERN_SEM:
- data = &ns->sem_ctls;
- break;
- default:
- return -EINVAL;
- }
-
- return __do_proc_dointvec(data, table, write, filp, buffer,
+ void *which;
+ which = get_ipc(table, write);
+ return __do_proc_dointvec(which, table, write, filp, buffer,
lenp, ppos, NULL, NULL);
-proc_minmax:
- return __do_proc_doulongvec_minmax(data, table, write, filp, buffer,
+}
+
+static int proc_ipc_doulongvec_minmax(ctl_table *table, int write,
+ struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ void *which;
+ which = get_ipc(table, write);
+ return __do_proc_doulongvec_minmax(which, table, write, filp, buffer,
lenp, ppos, 1l, 1l);
}
+
#endif
static int proc_do_cad_pid(ctl_table *table, int write, struct file *filp,
{
return -ENOSYS;
}
+static int proc_ipc_dointvec(ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ return -ENOSYS;
+}
+static int proc_ipc_doulongvec_minmax(ctl_table *table, int write,
+ struct file *filp, void __user *buffer,
+ size_t *lenp, loff_t *ppos)
+{
+ return -ENOSYS;
+}
#endif
int proc_dointvec(ctl_table *table, int write, struct file *filp,
/* The generic string strategy routine: */
int sysctl_string(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
if (!table->data || !table->maxlen)
return -ENOTDIR;
*/
int sysctl_intvec(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
if (newval && newlen) {
/* Strategy function to convert jiffies to seconds */
int sysctl_jiffies(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
if (oldval) {
size_t olen;
/* Strategy function to convert jiffies to seconds */
int sysctl_ms_jiffies(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
if (oldval) {
size_t olen;
return 1;
}
+
+/* The generic string strategy routine: */
+static int sysctl_uts_string(ctl_table *table, int __user *name, int nlen,
+ void __user *oldval, size_t __user *oldlenp,
+ void __user *newval, size_t newlen)
+{
+ struct ctl_table uts_table;
+ int r, write;
+ write = newval && newlen;
+ memcpy(&uts_table, table, sizeof(uts_table));
+ uts_table.data = get_uts(table, write);
+ r = sysctl_string(&uts_table, name, nlen,
+ oldval, oldlenp, newval, newlen);
+ put_uts(table, write, uts_table.data);
+ return r;
+}
+
+#ifdef CONFIG_SYSVIPC
+/* The generic sysctl ipc data routine. */
+static int sysctl_ipc_data(ctl_table *table, int __user *name, int nlen,
+ void __user *oldval, size_t __user *oldlenp,
+ void __user *newval, size_t newlen)
+{
+ size_t len;
+ void *data;
+
+ /* Get out of I don't have a variable */
+ if (!table->data || !table->maxlen)
+ return -ENOTDIR;
+
+ data = get_ipc(table, 1);
+ if (!data)
+ return -ENOTDIR;
+
+ if (oldval && oldlenp) {
+ if (get_user(len, oldlenp))
+ return -EFAULT;
+ if (len) {
+ if (len > table->maxlen)
+ len = table->maxlen;
+ if (copy_to_user(oldval, data, len))
+ return -EFAULT;
+ if (put_user(len, oldlenp))
+ return -EFAULT;
+ }
+ }
+
+ if (newval && newlen) {
+ if (newlen > table->maxlen)
+ newlen = table->maxlen;
+
+ if (copy_from_user(data, newval, newlen))
+ return -EFAULT;
+ }
+ return 1;
+}
+#endif
+
#else /* CONFIG_SYSCTL_SYSCALL */
int sysctl_string(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_intvec(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_jiffies(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_ms_jiffies(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen, void **context)
+ void __user *newval, size_t newlen)
{
return -ENOSYS;
}
+static int sysctl_uts_string(ctl_table *table, int __user *name, int nlen,
+ void __user *oldval, size_t __user *oldlenp,
+ void __user *newval, size_t newlen)
+{
+ return -ENOSYS;
+}
+static int sysctl_ipc_data(ctl_table *table, int __user *name, int nlen,
+ void __user *oldval, size_t __user *oldlenp,
+ void __user *newval, size_t newlen)
+{
+ return -ENOSYS;
+}
#endif /* CONFIG_SYSCTL_SYSCALL */
/*
/* check if clocksource is already registered */
if (is_registered_source(c)) {
printk("register_clocksource: Cannot register %s. "
- "Already registered!", c->name);
+ "Already registered!", c->name);
ret = -EBUSY;
} else {
/* register it */
}
EXPORT_SYMBOL(clocksource_reselect);
+#ifdef CONFIG_SYSFS
/**
* sysfs_show_current_clocksources - sysfs interface for current clocksource
* @dev: unused
* Sysfs setup bits:
*/
static SYSDEV_ATTR(current_clocksource, 0600, sysfs_show_current_clocksources,
- sysfs_override_clocksource);
+ sysfs_override_clocksource);
static SYSDEV_ATTR(available_clocksource, 0600,
- sysfs_show_available_clocksources, NULL);
+ sysfs_show_available_clocksources, NULL);
static struct sysdev_class clocksource_sysclass = {
set_kset_name("clocksource"),
}
device_initcall(init_clocksource_sysfs);
+#endif /* CONFIG_SYSFS */
/**
* boot_override_clocksource - boot clock override
EXPORT_SYMBOL(boot_tvec_bases);
static DEFINE_PER_CPU(tvec_base_t *, tvec_bases) = &boot_tvec_bases;
+/**
+ * __round_jiffies - function to round jiffies to a full second
+ * @j: the time in (absolute) jiffies that should be rounded
+ * @cpu: the processor number on which the timeout will happen
+ *
+ * __round_jiffies rounds an absolute time in the future (in jiffies)
+ * up or down to (approximately) full seconds. This is useful for timers
+ * for which the exact time they fire does not matter too much, as long as
+ * they fire approximately every X seconds.
+ *
+ * By rounding these timers to whole seconds, all such timers will fire
+ * at the same time, rather than at various times spread out. The goal
+ * of this is to have the CPU wake up less, which saves power.
+ *
+ * The exact rounding is skewed for each processor to avoid all
+ * processors firing at the exact same time, which could lead
+ * to lock contention or spurious cache line bouncing.
+ *
+ * The return value is the rounded version of the "j" parameter.
+ */
+unsigned long __round_jiffies(unsigned long j, int cpu)
+{
+ int rem;
+ unsigned long original = j;
+
+ /*
+ * We don't want all cpus firing their timers at once hitting the
+ * same lock or cachelines, so we skew each extra cpu with an extra
+ * 3 jiffies. This 3 jiffies came originally from the mm/ code which
+ * already did this.
+ * The skew is done by adding 3*cpunr, then round, then subtract this
+ * extra offset again.
+ */
+ j += cpu * 3;
+
+ rem = j % HZ;
+
+ /*
+ * If the target jiffie is just after a whole second (which can happen
+ * due to delays of the timer irq, long irq off times etc etc) then
+ * we should round down to the whole second, not up. Use 1/4th second
+ * as cutoff for this rounding as an extreme upper bound for this.
+ */
+ if (rem < HZ/4) /* round down */
+ j = j - rem;
+ else /* round up */
+ j = j - rem + HZ;
+
+ /* now that we have rounded, subtract the extra skew again */
+ j -= cpu * 3;
+
+ if (j <= jiffies) /* rounding ate our timeout entirely; */
+ return original;
+ return j;
+}
+EXPORT_SYMBOL_GPL(__round_jiffies);
+
+/**
+ * __round_jiffies_relative - function to round jiffies to a full second
+ * @j: the time in (relative) jiffies that should be rounded
+ * @cpu: the processor number on which the timeout will happen
+ *
+ * __round_jiffies_relative rounds a time delta in the future (in jiffies)
+ * up or down to (approximately) full seconds. This is useful for timers
+ * for which the exact time they fire does not matter too much, as long as
+ * they fire approximately every X seconds.
+ *
+ * By rounding these timers to whole seconds, all such timers will fire
+ * at the same time, rather than at various times spread out. The goal
+ * of this is to have the CPU wake up less, which saves power.
+ *
+ * The exact rounding is skewed for each processor to avoid all
+ * processors firing at the exact same time, which could lead
+ * to lock contention or spurious cache line bouncing.
+ *
+ * The return value is the rounded version of the "j" parameter.
+ */
+unsigned long __round_jiffies_relative(unsigned long j, int cpu)
+{
+ /*
+ * In theory the following code can skip a jiffy in case jiffies
+ * increments right between the addition and the later subtraction.
+ * However since the entire point of this function is to use approximate
+ * timeouts, it's entirely ok to not handle that.
+ */
+ return __round_jiffies(j + jiffies, cpu) - jiffies;
+}
+EXPORT_SYMBOL_GPL(__round_jiffies_relative);
+
+/**
+ * round_jiffies - function to round jiffies to a full second
+ * @j: the time in (absolute) jiffies that should be rounded
+ *
+ * round_jiffies rounds an absolute time in the future (in jiffies)
+ * up or down to (approximately) full seconds. This is useful for timers
+ * for which the exact time they fire does not matter too much, as long as
+ * they fire approximately every X seconds.
+ *
+ * By rounding these timers to whole seconds, all such timers will fire
+ * at the same time, rather than at various times spread out. The goal
+ * of this is to have the CPU wake up less, which saves power.
+ *
+ * The return value is the rounded version of the "j" parameter.
+ */
+unsigned long round_jiffies(unsigned long j)
+{
+ return __round_jiffies(j, raw_smp_processor_id());
+}
+EXPORT_SYMBOL_GPL(round_jiffies);
+
+/**
+ * round_jiffies_relative - function to round jiffies to a full second
+ * @j: the time in (relative) jiffies that should be rounded
+ *
+ * round_jiffies_relative rounds a time delta in the future (in jiffies)
+ * up or down to (approximately) full seconds. This is useful for timers
+ * for which the exact time they fire does not matter too much, as long as
+ * they fire approximately every X seconds.
+ *
+ * By rounding these timers to whole seconds, all such timers will fire
+ * at the same time, rather than at various times spread out. The goal
+ * of this is to have the CPU wake up less, which saves power.
+ *
+ * The return value is the rounded version of the "j" parameter.
+ */
+unsigned long round_jiffies_relative(unsigned long j)
+{
+ return __round_jiffies_relative(j, raw_smp_processor_id());
+}
+EXPORT_SYMBOL_GPL(round_jiffies_relative);
+
+
static inline void set_running_timer(tvec_base_t *base,
struct timer_list *timer)
{
clock = new;
clock->cycle_last = now;
printk(KERN_INFO "Time: %s clocksource has been installed.\n",
- clock->name);
+ clock->name);
return 1;
} else if (clock->update_callback) {
return clock->update_callback();
return 0;
}
#else
-#define change_clocksource() (0)
+static inline int change_clocksource(void)
+{
+ return 0;
+}
#endif
/**
* If the error is already larger, we look ahead even further
* to compensate for late or lost adjustments.
*/
-static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 *offset)
+static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
+ s64 *offset)
{
s64 tick_error, i;
u32 look_ahead, adj;
* Now calculate the error in (1 << look_ahead) ticks, but first
* remove the single look ahead already included in the error.
*/
- tick_error = current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1);
+ tick_error = current_tick_length() >>
+ (TICK_LENGTH_SHIFT - clock->shift + 1);
tick_error -= clock->xtime_interval >> 1;
error = ((error - tick_error) >> look_ahead) + tick_error;
clock->mult += adj;
clock->xtime_interval += interval;
clock->xtime_nsec -= offset;
- clock->error -= (interval - offset) << (TICK_LENGTH_SHIFT - clock->shift);
+ clock->error -= (interval - offset) <<
+ (TICK_LENGTH_SHIFT - clock->shift);
}
/**
unsigned long active_tasks; /* fixed-point */
static int count = LOAD_FREQ;
- active_tasks = count_active_tasks();
- for (count -= ticks; count < 0; count += LOAD_FREQ) {
- CALC_LOAD(avenrun[0], EXP_1, active_tasks);
- CALC_LOAD(avenrun[1], EXP_5, active_tasks);
- CALC_LOAD(avenrun[2], EXP_15, active_tasks);
+ count -= ticks;
+ if (unlikely(count < 0)) {
+ active_tasks = count_active_tasks();
+ do {
+ CALC_LOAD(avenrun[0], EXP_1, active_tasks);
+ CALC_LOAD(avenrun[1], EXP_5, active_tasks);
+ CALC_LOAD(avenrun[2], EXP_15, active_tasks);
+ count += LOAD_FREQ;
+ } while (count < 0);
}
}
stats->write_char = p->wchar;
stats->read_syscalls = p->syscr;
stats->write_syscalls = p->syscw;
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+ stats->read_bytes = p->ioac.read_bytes;
+ stats->write_bytes = p->ioac.write_bytes;
+ stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes;
+#else
+ stats->read_bytes = 0;
+ stats->write_bytes = 0;
+ stats->cancelled_write_bytes = 0;
+#endif
}
#undef KB
#undef MB
return list_empty(&wq->list);
}
+/*
+ * Set the workqueue on which a work item is to be run
+ * - Must *only* be called if the pending flag is set
+ */
static inline void set_wq_data(struct work_struct *work, void *wq)
{
- unsigned long new, old, res;
+ unsigned long new;
+
+ BUG_ON(!work_pending(work));
- /* assume the pending flag is already set and that the task has already
- * been queued on this workqueue */
new = (unsigned long) wq | (1UL << WORK_STRUCT_PENDING);
- res = work->management;
- if (res != new) {
- do {
- old = res;
- new = (unsigned long) wq;
- new |= (old & WORK_STRUCT_FLAG_MASK);
- res = cmpxchg(&work->management, old, new);
- } while (res != old);
- }
+ new |= work->management & WORK_STRUCT_FLAG_MASK;
+ work->management = new;
}
static inline void *get_wq_data(struct work_struct *work)
menu "Library routines"
+config BITREVERSE
+ tristate
+
config CRC_CCITT
tristate "CRC-CCITT functions"
help
config CRC32
tristate "CRC32 functions"
default y
+ select BITREVERSE
help
This option is provided for the case where no in-kernel-tree
modules require CRC32 functions, but a module built outside the
config PLIST
boolean
+config IOMAP_COPY
+ boolean
+ depends on !UML
+ default y
+
endmenu
you really need it, and what the merge plan to the mainline kernel for
your module is.
+config DEBUG_FS
+ bool "Debug Filesystem"
+ depends on SYSFS
+ help
+ debugfs is a virtual file system that kernel developers use to put
+ debugging files into. Enable this option to be able to read and
+ write to these files.
+
+ If unsure, say N.
+
+config HEADERS_CHECK
+ bool "Run 'make headers_check' when building vmlinux"
+ depends on !UML
+ help
+ This option will extract the user-visible kernel headers whenever
+ building the kernel, and will run basic sanity checks on them to
+ ensure that exported files do not attempt to include files which
+ were not exported, etc.
+
+ If you're making modifications to header files which are
+ relevant for userspace, say 'Y', and check the headers
+ exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
+ your build tree), to make sure they're suitable.
+
config DEBUG_KERNEL
bool "Kernel debugging"
help
config DEBUG_BUGVERBOSE
bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED
depends on BUG
- depends on ARM || ARM26 || AVR32 || M32R || M68K || SPARC32 || SPARC64 || X86_32 || FRV || SUPERH
+ depends on ARM || ARM26 || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG
default !EMBEDDED
help
Say Y here to make BUG() panics output the file name and line number
If unsure, say N.
-config DEBUG_FS
- bool "Debug Filesystem"
- depends on SYSFS
- help
- debugfs is a virtual file system that kernel developers use to put
- debugging files into. Enable this option to be able to read and
- write to these files.
-
- If unsure, say N.
-
config DEBUG_VM
bool "Debug VM"
depends on DEBUG_KERNEL
become the default in the future, until then this option is there to
test gcc for this.
-config HEADERS_CHECK
- bool "Run 'make headers_check' when building vmlinux"
- depends on !UML
- help
- This option will extract the user-visible kernel headers whenever
- building the kernel, and will run basic sanity checks on them to
- ensure that exported files do not attempt to include files which
- were not exported, etc.
-
- If you're making modifications to header files which are
- relevant for userspace, say 'Y', and check the headers
- exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
- your build tree), to make sure they're suitable.
-
config RCU_TORTURE_TEST
tristate "torture tests for RCU"
depends on DEBUG_KERNEL
config LKDTM
tristate "Linux Kernel Dump Test Tool Module"
+ depends on DEBUG_KERNEL
depends on KPROBES
default n
help
Documentation on how to use the module can be found in
drivers/misc/lkdtm.c
+
+config FAULT_INJECTION
+ bool "Fault-injection framework"
+ depends on DEBUG_KERNEL
+ depends on STACKTRACE
+ select FRAME_POINTER
+ help
+ Provide fault-injection framework.
+ For more details, see Documentation/fault-injection/.
+
+config FAILSLAB
+ bool "Fault-injection capability for kmalloc"
+ depends on FAULT_INJECTION
+ help
+ Provide fault-injection capability for kmalloc.
+
+config FAIL_PAGE_ALLOC
+ bool "Fault-injection capabilitiy for alloc_pages()"
+ depends on FAULT_INJECTION
+ help
+ Provide fault-injection capability for alloc_pages().
+
+config FAIL_MAKE_REQUEST
+ bool "Fault-injection capability for disk IO"
+ depends on FAULT_INJECTION
+ help
+ Provide fault-injection capability for disk IO.
+
+config FAULT_INJECTION_DEBUG_FS
+ bool "Debugfs entries for fault-injection capabilities"
+ depends on FAULT_INJECTION && SYSFS && DEBUG_FS
+ help
+ Enable configuration of fault-injection capabilities via debugfs.
lib-y := ctype.o string.o vsprintf.o cmdline.o \
bust_spinlocks.o rbtree.o radix-tree.o dump_stack.o \
idr.o div64.o int_sqrt.o bitmap.o extable.o prio_tree.o \
- sha1.o irq_regs.o
+ sha1.o irq_regs.o reciprocal_div.o
lib-$(CONFIG_MMU) += ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
lib-y += kobject.o kref.o kobject_uevent.o klist.o
-obj-y += sort.o parser.o halfmd4.o iomap_copy.o debug_locks.o random32.o
+obj-y += sort.o parser.o halfmd4.o debug_locks.o random32.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
CFLAGS_kobject_uevent.o += -DDEBUG
endif
+obj-$(CONFIG_IOMAP_COPY) += iomap_copy.o
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock_debug.o
lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o
lib-y += dec_and_lock.o
endif
+obj-$(CONFIG_BITREVERSE) += bitrev.o
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
obj-$(CONFIG_CRC16) += crc16.o
obj-$(CONFIG_CRC32) += crc32.o
obj-$(CONFIG_AUDIT_GENERIC) += audit.o
obj-$(CONFIG_SWIOTLB) += swiotlb.o
+obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
+
+lib-$(CONFIG_GENERIC_BUG) += bug.o
hostprogs-y := gen_crc32table
clean-files := crc32table.h
--- /dev/null
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/bitrev.h>
+
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
+MODULE_DESCRIPTION("Bit ordering reversal functions");
+MODULE_LICENSE("GPL");
+
+const u8 byte_rev_table[256] = {
+ 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
+ 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
+ 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
+ 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
+ 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
+ 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
+ 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
+ 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
+ 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
+ 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
+ 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+ 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
+ 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
+ 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
+ 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
+ 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
+ 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
+ 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
+ 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
+ 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
+ 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
+ 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+ 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
+ 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
+ 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
+ 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
+ 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
+ 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
+ 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
+ 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
+ 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
+ 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
+};
+EXPORT_SYMBOL_GPL(byte_rev_table);
+
+static __always_inline u16 bitrev16(u16 x)
+{
+ return (bitrev8(x & 0xff) << 8) | bitrev8(x >> 8);
+}
+
+/**
+ * bitrev32 - reverse the order of bits in a u32 value
+ * @x: value to be bit-reversed
+ */
+u32 bitrev32(u32 x)
+{
+ return (bitrev16(x & 0xffff) << 16) | bitrev16(x >> 16);
+}
+EXPORT_SYMBOL(bitrev32);
--- /dev/null
+/*
+ Generic support for BUG()
+
+ This respects the following config options:
+
+ CONFIG_BUG - emit BUG traps. Nothing happens without this.
+ CONFIG_GENERIC_BUG - enable this code.
+ CONFIG_DEBUG_BUGVERBOSE - emit full file+line information for each BUG
+
+ CONFIG_BUG and CONFIG_DEBUG_BUGVERBOSE are potentially user-settable
+ (though they're generally always on).
+
+ CONFIG_GENERIC_BUG is set by each architecture using this code.
+
+ To use this, your architecture must:
+
+ 1. Set up the config options:
+ - Enable CONFIG_GENERIC_BUG if CONFIG_BUG
+
+ 2. Implement BUG (and optionally BUG_ON, WARN, WARN_ON)
+ - Define HAVE_ARCH_BUG
+ - Implement BUG() to generate a faulting instruction
+ - NOTE: struct bug_entry does not have "file" or "line" entries
+ when CONFIG_DEBUG_BUGVERBOSE is not enabled, so you must generate
+ the values accordingly.
+
+ 3. Implement the trap
+ - In the illegal instruction trap handler (typically), verify
+ that the fault was in kernel mode, and call report_bug()
+ - report_bug() will return whether it was a false alarm, a warning,
+ or an actual bug.
+ - You must implement the is_valid_bugaddr(bugaddr) callback which
+ returns true if the eip is a real kernel address, and it points
+ to the expected BUG trap instruction.
+
+ Jeremy Fitzhardinge <jeremy@goop.org> 2006
+ */
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/bug.h>
+
+extern const struct bug_entry __start___bug_table[], __stop___bug_table[];
+
+#ifdef CONFIG_MODULES
+static LIST_HEAD(module_bug_list);
+
+static const struct bug_entry *module_find_bug(unsigned long bugaddr)
+{
+ struct module *mod;
+
+ list_for_each_entry(mod, &module_bug_list, bug_list) {
+ const struct bug_entry *bug = mod->bug_table;
+ unsigned i;
+
+ for (i = 0; i < mod->num_bugs; ++i, ++bug)
+ if (bugaddr == bug->bug_addr)
+ return bug;
+ }
+ return NULL;
+}
+
+int module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ struct module *mod)
+{
+ char *secstrings;
+ unsigned int i;
+
+ mod->bug_table = NULL;
+ mod->num_bugs = 0;
+
+ /* Find the __bug_table section, if present */
+ secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+ for (i = 1; i < hdr->e_shnum; i++) {
+ if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table"))
+ continue;
+ mod->bug_table = (void *) sechdrs[i].sh_addr;
+ mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
+ break;
+ }
+
+ /*
+ * Strictly speaking this should have a spinlock to protect against
+ * traversals, but since we only traverse on BUG()s, a spinlock
+ * could potentially lead to deadlock and thus be counter-productive.
+ */
+ list_add(&mod->bug_list, &module_bug_list);
+
+ return 0;
+}
+
+void module_bug_cleanup(struct module *mod)
+{
+ list_del(&mod->bug_list);
+}
+
+#else
+
+static inline const struct bug_entry *module_find_bug(unsigned long bugaddr)
+{
+ return NULL;
+}
+#endif
+
+const struct bug_entry *find_bug(unsigned long bugaddr)
+{
+ const struct bug_entry *bug;
+
+ for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
+ if (bugaddr == bug->bug_addr)
+ return bug;
+
+ return module_find_bug(bugaddr);
+}
+
+enum bug_trap_type report_bug(unsigned long bugaddr)
+{
+ const struct bug_entry *bug;
+ const char *file;
+ unsigned line, warning;
+
+ if (!is_valid_bugaddr(bugaddr))
+ return BUG_TRAP_TYPE_NONE;
+
+ bug = find_bug(bugaddr);
+
+ printk(KERN_EMERG "------------[ cut here ]------------\n");
+
+ file = NULL;
+ line = 0;
+ warning = 0;
+
+ if (bug) {
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+ file = bug->file;
+ line = bug->line;
+#endif
+ warning = (bug->flags & BUGFLAG_WARNING) != 0;
+ }
+
+ if (warning) {
+ /* this is a WARN_ON rather than BUG/BUG_ON */
+ if (file)
+ printk(KERN_ERR "Badness at %s:%u\n",
+ file, line);
+ else
+ printk(KERN_ERR "Badness at %p "
+ "[verbose debug info unavailable]\n",
+ (void *)bugaddr);
+
+ dump_stack();
+ return BUG_TRAP_TYPE_WARN;
+ }
+
+ if (file)
+ printk(KERN_CRIT "kernel BUG at %s:%u!\n",
+ file, line);
+ else
+ printk(KERN_CRIT "Kernel BUG at %p "
+ "[verbose debug info unavailable]\n",
+ (void *)bugaddr);
+
+ return BUG_TRAP_TYPE_BUG;
+}
}
#endif
-/**
- * bitreverse - reverse the order of bits in a u32 value
- * @x: value to be bit-reversed
- */
-u32 bitreverse(u32 x)
-{
- x = (x >> 16) | (x << 16);
- x = (x >> 8 & 0x00ff00ff) | (x << 8 & 0xff00ff00);
- x = (x >> 4 & 0x0f0f0f0f) | (x << 4 & 0xf0f0f0f0);
- x = (x >> 2 & 0x33333333) | (x << 2 & 0xcccccccc);
- x = (x >> 1 & 0x55555555) | (x << 1 & 0xaaaaaaaa);
- return x;
-}
-
EXPORT_SYMBOL(crc32_le);
EXPORT_SYMBOL(crc32_be);
-EXPORT_SYMBOL(bitreverse);
/*
* A brief CRC tutorial.
static void bytereverse(unsigned char *buf, size_t len)
{
while (len--) {
- unsigned char x = *buf;
- x = (x >> 4) | (x << 4);
- x = (x >> 2 & 0x33) | (x << 2 & 0xcc);
- x = (x >> 1 & 0x55) | (x << 1 & 0xaa);
+ unsigned char x = bitrev8(*buf);
*buf++ = x;
}
}
/* Now swap it around for the other test */
bytereverse(buf, len + 4);
- init = bitreverse(init);
- crc2 = bitreverse(crc1);
- if (crc1 != bitreverse(crc2))
+ init = bitrev32(init);
+ crc2 = bitrev32(crc1);
+ if (crc1 != bitrev32(crc2))
printf("\nBit reversal fail: 0x%08x -> 0x%08x -> 0x%08x\n",
- crc1, crc2, bitreverse(crc2));
+ crc1, crc2, bitrev32(crc2));
crc1 = crc32_le(init, buf, len);
if (crc1 != crc2)
printf("\nCRC endianness fail: 0x%08x != 0x%08x\n", crc1,
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/random.h>
+#include <linux/stat.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/unwind.h>
+#include <linux/stacktrace.h>
+#include <linux/kallsyms.h>
+#include <linux/fault-inject.h>
+
+/*
+ * setup_fault_attr() is a helper function for various __setup handlers, so it
+ * returns 0 on error, because that is what __setup handlers do.
+ */
+int __init setup_fault_attr(struct fault_attr *attr, char *str)
+{
+ unsigned long probability;
+ unsigned long interval;
+ int times;
+ int space;
+
+ /* "<interval>,<probability>,<space>,<times>" */
+ if (sscanf(str, "%lu,%lu,%d,%d",
+ &interval, &probability, &space, ×) < 4) {
+ printk(KERN_WARNING
+ "FAULT_INJECTION: failed to parse arguments\n");
+ return 0;
+ }
+
+ attr->probability = probability;
+ attr->interval = interval;
+ atomic_set(&attr->times, times);
+ atomic_set(&attr->space, space);
+
+ return 1;
+}
+
+static void fail_dump(struct fault_attr *attr)
+{
+ if (attr->verbose > 0)
+ printk(KERN_NOTICE "FAULT_INJECTION: forcing a failure\n");
+ if (attr->verbose > 1)
+ dump_stack();
+}
+
+#define atomic_dec_not_zero(v) atomic_add_unless((v), -1, 0)
+
+static bool fail_task(struct fault_attr *attr, struct task_struct *task)
+{
+ return !in_interrupt() && task->make_it_fail;
+}
+
+#define MAX_STACK_TRACE_DEPTH 32
+
+#ifdef CONFIG_STACK_UNWIND
+
+static asmlinkage int fail_stacktrace_callback(struct unwind_frame_info *info,
+ void *arg)
+{
+ int depth;
+ struct fault_attr *attr = arg;
+ bool found = (attr->require_start == 0 && attr->require_end == ULONG_MAX);
+
+ for (depth = 0; depth < attr->stacktrace_depth
+ && unwind(info) == 0 && UNW_PC(info); depth++) {
+ if (arch_unw_user_mode(info))
+ break;
+ if (attr->reject_start <= UNW_PC(info) &&
+ UNW_PC(info) < attr->reject_end)
+ return false;
+ if (attr->require_start <= UNW_PC(info) &&
+ UNW_PC(info) < attr->require_end)
+ found = true;
+ }
+ return found;
+}
+
+static bool fail_stacktrace(struct fault_attr *attr)
+{
+ struct unwind_frame_info info;
+
+ return unwind_init_running(&info, fail_stacktrace_callback, attr);
+}
+
+#elif defined(CONFIG_STACKTRACE)
+
+static bool fail_stacktrace(struct fault_attr *attr)
+{
+ struct stack_trace trace;
+ int depth = attr->stacktrace_depth;
+ unsigned long entries[MAX_STACK_TRACE_DEPTH];
+ int n;
+ bool found = (attr->require_start == 0 && attr->require_end == ULONG_MAX);
+
+ if (depth == 0)
+ return found;
+
+ trace.nr_entries = 0;
+ trace.entries = entries;
+ trace.max_entries = depth;
+ trace.skip = 1;
+ trace.all_contexts = 0;
+
+ save_stack_trace(&trace, NULL);
+ for (n = 0; n < trace.nr_entries; n++) {
+ if (attr->reject_start <= entries[n] &&
+ entries[n] < attr->reject_end)
+ return false;
+ if (attr->require_start <= entries[n] &&
+ entries[n] < attr->require_end)
+ found = true;
+ }
+ return found;
+}
+
+#else
+
+static inline bool fail_stacktrace(struct fault_attr *attr)
+{
+ static bool firsttime = true;
+
+ if (firsttime) {
+ printk(KERN_WARNING
+ "This architecture does not implement save_stack_trace()\n");
+ firsttime = false;
+ }
+ return false;
+}
+
+#endif
+
+/*
+ * This code is stolen from failmalloc-1.0
+ * http://www.nongnu.org/failmalloc/
+ */
+
+bool should_fail(struct fault_attr *attr, ssize_t size)
+{
+ if (attr->task_filter && !fail_task(attr, current))
+ return false;
+
+ if (atomic_read(&attr->times) == 0)
+ return false;
+
+ if (atomic_read(&attr->space) > size) {
+ atomic_sub(size, &attr->space);
+ return false;
+ }
+
+ if (attr->interval > 1) {
+ attr->count++;
+ if (attr->count % attr->interval)
+ return false;
+ }
+
+ if (attr->probability <= random32() % 100)
+ return false;
+
+ if (!fail_stacktrace(attr))
+ return false;
+
+ fail_dump(attr);
+
+ if (atomic_read(&attr->times) != -1)
+ atomic_dec_not_zero(&attr->times);
+
+ return true;
+}
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+static void debugfs_ul_set(void *data, u64 val)
+{
+ *(unsigned long *)data = val;
+}
+
+static void debugfs_ul_set_MAX_STACK_TRACE_DEPTH(void *data, u64 val)
+{
+ *(unsigned long *)data =
+ val < MAX_STACK_TRACE_DEPTH ?
+ val : MAX_STACK_TRACE_DEPTH;
+}
+
+static u64 debugfs_ul_get(void *data)
+{
+ return *(unsigned long *)data;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_ul, debugfs_ul_get, debugfs_ul_set, "%llu\n");
+
+static struct dentry *debugfs_create_ul(const char *name, mode_t mode,
+ struct dentry *parent, unsigned long *value)
+{
+ return debugfs_create_file(name, mode, parent, value, &fops_ul);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_ul_MAX_STACK_TRACE_DEPTH, debugfs_ul_get,
+ debugfs_ul_set_MAX_STACK_TRACE_DEPTH, "%llu\n");
+
+static struct dentry *debugfs_create_ul_MAX_STACK_TRACE_DEPTH(
+ const char *name, mode_t mode,
+ struct dentry *parent, unsigned long *value)
+{
+ return debugfs_create_file(name, mode, parent, value,
+ &fops_ul_MAX_STACK_TRACE_DEPTH);
+}
+
+static void debugfs_atomic_t_set(void *data, u64 val)
+{
+ atomic_set((atomic_t *)data, val);
+}
+
+static u64 debugfs_atomic_t_get(void *data)
+{
+ return atomic_read((atomic_t *)data);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_atomic_t, debugfs_atomic_t_get,
+ debugfs_atomic_t_set, "%lld\n");
+
+static struct dentry *debugfs_create_atomic_t(const char *name, mode_t mode,
+ struct dentry *parent, atomic_t *value)
+{
+ return debugfs_create_file(name, mode, parent, value, &fops_atomic_t);
+}
+
+void cleanup_fault_attr_dentries(struct fault_attr *attr)
+{
+ debugfs_remove(attr->dentries.probability_file);
+ attr->dentries.probability_file = NULL;
+
+ debugfs_remove(attr->dentries.interval_file);
+ attr->dentries.interval_file = NULL;
+
+ debugfs_remove(attr->dentries.times_file);
+ attr->dentries.times_file = NULL;
+
+ debugfs_remove(attr->dentries.space_file);
+ attr->dentries.space_file = NULL;
+
+ debugfs_remove(attr->dentries.verbose_file);
+ attr->dentries.verbose_file = NULL;
+
+ debugfs_remove(attr->dentries.task_filter_file);
+ attr->dentries.task_filter_file = NULL;
+
+ debugfs_remove(attr->dentries.stacktrace_depth_file);
+ attr->dentries.stacktrace_depth_file = NULL;
+
+ debugfs_remove(attr->dentries.require_start_file);
+ attr->dentries.require_start_file = NULL;
+
+ debugfs_remove(attr->dentries.require_end_file);
+ attr->dentries.require_end_file = NULL;
+
+ debugfs_remove(attr->dentries.reject_start_file);
+ attr->dentries.reject_start_file = NULL;
+
+ debugfs_remove(attr->dentries.reject_end_file);
+ attr->dentries.reject_end_file = NULL;
+
+ if (attr->dentries.dir)
+ WARN_ON(!simple_empty(attr->dentries.dir));
+
+ debugfs_remove(attr->dentries.dir);
+ attr->dentries.dir = NULL;
+}
+
+int init_fault_attr_dentries(struct fault_attr *attr, const char *name)
+{
+ mode_t mode = S_IFREG | S_IRUSR | S_IWUSR;
+ struct dentry *dir;
+
+ memset(&attr->dentries, 0, sizeof(attr->dentries));
+
+ dir = debugfs_create_dir(name, NULL);
+ if (!dir)
+ goto fail;
+ attr->dentries.dir = dir;
+
+ attr->dentries.probability_file =
+ debugfs_create_ul("probability", mode, dir, &attr->probability);
+
+ attr->dentries.interval_file =
+ debugfs_create_ul("interval", mode, dir, &attr->interval);
+
+ attr->dentries.times_file =
+ debugfs_create_atomic_t("times", mode, dir, &attr->times);
+
+ attr->dentries.space_file =
+ debugfs_create_atomic_t("space", mode, dir, &attr->space);
+
+ attr->dentries.verbose_file =
+ debugfs_create_ul("verbose", mode, dir, &attr->verbose);
+
+ attr->dentries.task_filter_file = debugfs_create_bool("task-filter",
+ mode, dir, &attr->task_filter);
+
+ attr->dentries.stacktrace_depth_file =
+ debugfs_create_ul_MAX_STACK_TRACE_DEPTH(
+ "stacktrace-depth", mode, dir, &attr->stacktrace_depth);
+
+ attr->dentries.require_start_file =
+ debugfs_create_ul("require-start", mode, dir, &attr->require_start);
+
+ attr->dentries.require_end_file =
+ debugfs_create_ul("require-end", mode, dir, &attr->require_end);
+
+ attr->dentries.reject_start_file =
+ debugfs_create_ul("reject-start", mode, dir, &attr->reject_start);
+
+ attr->dentries.reject_end_file =
+ debugfs_create_ul("reject-end", mode, dir, &attr->reject_end);
+
+
+ if (!attr->dentries.probability_file || !attr->dentries.interval_file
+ || !attr->dentries.times_file || !attr->dentries.space_file
+ || !attr->dentries.verbose_file || !attr->dentries.task_filter_file
+ || !attr->dentries.stacktrace_depth_file
+ || !attr->dentries.require_start_file
+ || !attr->dentries.require_end_file
+ || !attr->dentries.reject_start_file
+ || !attr->dentries.reject_end_file
+ )
+ goto fail;
+
+ return 0;
+fail:
+ cleanup_fault_attr_dentries(attr);
+ return -ENOMEM;
+}
+
+#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
*
* (C) Copyright 1995 1996 Linus Torvalds
*/
-#include <linux/io.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
--- /dev/null
+#include <asm/div64.h>
+#include <linux/reciprocal_div.h>
+
+u32 reciprocal_value(u32 k)
+{
+ u64 val = (1LL << 32) + (k - 1);
+ do_div(val, k);
+ return (u32)val;
+}
if (!file)
return -EBADF;
- if (S_ISFIFO(file->f_dentry->d_inode->i_mode)) {
+ if (S_ISFIFO(file->f_path.dentry->d_inode->i_mode)) {
ret = -ESPIPE;
goto out;
}
if (pos < size) {
retval = generic_file_direct_IO(READ, iocb,
iov, pos, nr_segs);
- if (retval > 0 && !is_sync_kiocb(iocb))
- retval = -EIOCBQUEUED;
if (retval > 0)
*ppos = pos + retval;
}
* Sync the fs metadata but not the minor inode changes and
* of course not the data as we did direct DMA for the IO.
* i_mutex is held, which protects generic_osync_inode() from
- * livelocking.
+ * livelocking. AIO O_DIRECT ops attempt to sync metadata here.
*/
- if (written >= 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ if ((written >= 0 || written == -EIOCBQUEUED) &&
+ ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
int err = generic_osync_inode(inode, mapping, OSYNC_METADATA);
if (err < 0)
written = err;
}
- if (written == count && !is_sync_kiocb(iocb))
- written = -EIOCBQUEUED;
return written;
}
EXPORT_SYMBOL(generic_file_direct_write);
if (count == 0)
goto out;
- err = remove_suid(file->f_dentry);
+ err = remove_suid(file->f_path.dentry);
if (err)
goto out;
if (count == 0)
goto out_backing;
- ret = remove_suid(filp->f_dentry);
+ ret = remove_suid(filp->f_path.dentry);
if (ret)
goto out_backing;
}
static void copy_huge_page(struct page *dst, struct page *src,
- unsigned long addr)
+ unsigned long addr, struct vm_area_struct *vma)
{
int i;
might_sleep();
for (i = 0; i < HPAGE_SIZE/PAGE_SIZE; i++) {
cond_resched();
- copy_user_highpage(dst + i, src + i, addr + i*PAGE_SIZE);
+ copy_user_highpage(dst + i, src + i, addr + i*PAGE_SIZE, vma);
}
}
for (z = zonelist->zones; *z; z++) {
nid = zone_to_nid(*z);
- if (cpuset_zone_allowed(*z, GFP_HIGHUSER) &&
+ if (cpuset_zone_allowed_softwall(*z, GFP_HIGHUSER) &&
!list_empty(&hugepage_freelists[nid]))
break;
}
}
spin_unlock(&mm->page_table_lock);
- copy_huge_page(new_page, old_page, address);
+ copy_huge_page(new_page, old_page, address, vma);
spin_lock(&mm->page_table_lock);
ptep = huge_pte_offset(mm, address & HPAGE_MASK);
{
pte_t *pte;
spinlock_t *ptl;
+ int err = 0;
pte = pte_alloc_map_lock(mm, pmd, addr, &ptl);
if (!pte)
- return -ENOMEM;
+ return -EAGAIN;
arch_enter_lazy_mmu_mode();
do {
struct page *page = ZERO_PAGE(addr);
pte_t zero_pte = pte_wrprotect(mk_pte(page, prot));
+
+ if (unlikely(!pte_none(*pte))) {
+ err = -EEXIST;
+ pte++;
+ break;
+ }
page_cache_get(page);
page_add_file_rmap(page);
inc_mm_counter(mm, file_rss);
- BUG_ON(!pte_none(*pte));
set_pte_at(mm, addr, pte, zero_pte);
} while (pte++, addr += PAGE_SIZE, addr != end);
arch_leave_lazy_mmu_mode();
pte_unmap_unlock(pte - 1, ptl);
- return 0;
+ return err;
}
static inline int zeromap_pmd_range(struct mm_struct *mm, pud_t *pud,
{
pmd_t *pmd;
unsigned long next;
+ int err;
pmd = pmd_alloc(mm, pud, addr);
if (!pmd)
- return -ENOMEM;
+ return -EAGAIN;
do {
next = pmd_addr_end(addr, end);
- if (zeromap_pte_range(mm, pmd, addr, next, prot))
- return -ENOMEM;
+ err = zeromap_pte_range(mm, pmd, addr, next, prot);
+ if (err)
+ break;
} while (pmd++, addr = next, addr != end);
- return 0;
+ return err;
}
static inline int zeromap_pud_range(struct mm_struct *mm, pgd_t *pgd,
{
pud_t *pud;
unsigned long next;
+ int err;
pud = pud_alloc(mm, pgd, addr);
if (!pud)
- return -ENOMEM;
+ return -EAGAIN;
do {
next = pud_addr_end(addr, end);
- if (zeromap_pmd_range(mm, pud, addr, next, prot))
- return -ENOMEM;
+ err = zeromap_pmd_range(mm, pud, addr, next, prot);
+ if (err)
+ break;
} while (pud++, addr = next, addr != end);
- return 0;
+ return err;
}
int zeromap_page_range(struct vm_area_struct *vma,
return pte;
}
-static inline void cow_user_page(struct page *dst, struct page *src, unsigned long va)
+static inline void cow_user_page(struct page *dst, struct page *src, unsigned long va, struct vm_area_struct *vma)
{
/*
* If the source page was a PFN mapping, we don't have
kunmap_atomic(kaddr, KM_USER0);
flush_dcache_page(dst);
return;
-
+
}
- copy_user_highpage(dst, src, va);
+ copy_user_highpage(dst, src, va, vma);
}
/*
new_page = alloc_page_vma(GFP_HIGHUSER, vma, address);
if (!new_page)
goto oom;
- cow_user_page(new_page, old_page, address);
+ cow_user_page(new_page, old_page, address, vma);
}
/*
page = alloc_page_vma(GFP_HIGHUSER, vma, address);
if (!page)
goto oom;
- copy_user_highpage(page, new_page, address);
+ copy_user_highpage(page, new_page, address, vma);
page_cache_release(new_page);
new_page = page;
anon = 1;
if (file) {
seq_printf(m, " file=");
- seq_path(m, file->f_vfsmnt, file->f_dentry, "\n\t= ");
+ seq_path(m, file->f_path.mnt, file->f_path.dentry, "\n\t= ");
} else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) {
seq_printf(m, " heap");
} else if (vma->vm_start <= mm->start_stack &&
struct file *file, struct address_space *mapping)
{
if (vma->vm_flags & VM_DENYWRITE)
- atomic_inc(&file->f_dentry->d_inode->i_writecount);
+ atomic_inc(&file->f_path.dentry->d_inode->i_writecount);
if (vma->vm_flags & VM_SHARED)
mapping->i_mmap_writable--;
struct address_space *mapping = file->f_mapping;
if (vma->vm_flags & VM_DENYWRITE)
- atomic_dec(&file->f_dentry->d_inode->i_writecount);
+ atomic_dec(&file->f_path.dentry->d_inode->i_writecount);
if (vma->vm_flags & VM_SHARED)
mapping->i_mmap_writable++;
* mounted, in which case we dont add PROT_EXEC.)
*/
if ((prot & PROT_READ) && (current->personality & READ_IMPLIES_EXEC))
- if (!(file && (file->f_vfsmnt->mnt_flags & MNT_NOEXEC)))
+ if (!(file && (file->f_path.mnt->mnt_flags & MNT_NOEXEC)))
prot |= PROT_EXEC;
if (!len)
return -EAGAIN;
}
- inode = file ? file->f_dentry->d_inode : NULL;
+ inode = file ? file->f_path.dentry->d_inode : NULL;
if (file) {
switch (flags & MAP_TYPE) {
case MAP_PRIVATE:
if (!(file->f_mode & FMODE_READ))
return -EACCES;
- if (file->f_vfsmnt->mnt_flags & MNT_NOEXEC) {
+ if (file->f_path.mnt->mnt_flags & MNT_NOEXEC) {
if (vm_flags & VM_EXEC)
return -EPERM;
vm_flags &= ~VM_MAYEXEC;
*/
mapping = file->f_mapping;
if (!mapping)
- mapping = file->f_dentry->d_inode->i_mapping;
+ mapping = file->f_path.dentry->d_inode->i_mapping;
capabilities = 0;
if (mapping && mapping->backing_dev_info)
if (!capabilities) {
/* no explicit capabilities set, so assume some
* defaults */
- switch (file->f_dentry->d_inode->i_mode & S_IFMT) {
+ switch (file->f_path.dentry->d_inode->i_mode & S_IFMT) {
case S_IFREG:
case S_IFBLK:
capabilities = BDI_CAP_MAP_COPY;
!(file->f_mode & FMODE_WRITE))
return -EACCES;
- if (IS_APPEND(file->f_dentry->d_inode) &&
+ if (IS_APPEND(file->f_path.dentry->d_inode) &&
(file->f_mode & FMODE_WRITE))
return -EACCES;
- if (locks_verify_locked(file->f_dentry->d_inode))
+ if (locks_verify_locked(file->f_path.dentry->d_inode))
return -EAGAIN;
if (!(capabilities & BDI_CAP_MAP_DIRECT))
/* handle executable mappings and implied executable
* mappings */
- if (file->f_vfsmnt->mnt_flags & MNT_NOEXEC) {
+ if (file->f_path.mnt->mnt_flags & MNT_NOEXEC) {
if (prot & PROT_EXEC)
return -EPERM;
}
continue;
/* search for overlapping mappings on the same file */
- if (vma->vm_file->f_dentry->d_inode != file->f_dentry->d_inode)
+ if (vma->vm_file->f_path.dentry->d_inode != file->f_path.dentry->d_inode)
continue;
if (vma->vm_pgoff >= pgoff + pglen)
nodemask_t nodes = node_online_map;
for (z = zonelist->zones; *z; z++)
- if (cpuset_zone_allowed(*z, gfp_mask))
+ if (cpuset_zone_allowed_softwall(*z, gfp_mask))
node_clear(zone_to_nid(*z), nodes);
else
return CONSTRAINT_CPUSET;
#include <linux/writeback.h>
#include <linux/init.h>
#include <linux/backing-dev.h>
+#include <linux/task_io_accounting_ops.h>
#include <linux/blkdev.h>
#include <linux/mpage.h>
#include <linux/rmap.h>
struct address_space *mapping = page_mapping(page);
struct address_space *mapping2;
- if (mapping) {
- write_lock_irq(&mapping->tree_lock);
- mapping2 = page_mapping(page);
- if (mapping2) { /* Race with truncate? */
- BUG_ON(mapping2 != mapping);
- if (mapping_cap_account_dirty(mapping))
- __inc_zone_page_state(page,
- NR_FILE_DIRTY);
- radix_tree_tag_set(&mapping->page_tree,
- page_index(page), PAGECACHE_TAG_DIRTY);
- }
- write_unlock_irq(&mapping->tree_lock);
- if (mapping->host) {
- /* !PageAnon && !swapper_space */
- __mark_inode_dirty(mapping->host,
- I_DIRTY_PAGES);
+ if (!mapping)
+ return 1;
+
+ write_lock_irq(&mapping->tree_lock);
+ mapping2 = page_mapping(page);
+ if (mapping2) { /* Race with truncate? */
+ BUG_ON(mapping2 != mapping);
+ if (mapping_cap_account_dirty(mapping)) {
+ __inc_zone_page_state(page, NR_FILE_DIRTY);
+ task_io_account_write(PAGE_CACHE_SIZE);
}
+ radix_tree_tag_set(&mapping->page_tree,
+ page_index(page), PAGECACHE_TAG_DIRTY);
+ }
+ write_unlock_irq(&mapping->tree_lock);
+ if (mapping->host) {
+ /* !PageAnon && !swapper_space */
+ __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
}
return 1;
}
struct address_space *mapping = page_mapping(page);
unsigned long flags;
- if (mapping) {
- write_lock_irqsave(&mapping->tree_lock, flags);
- if (TestClearPageDirty(page)) {
- radix_tree_tag_clear(&mapping->page_tree,
- page_index(page),
- PAGECACHE_TAG_DIRTY);
- write_unlock_irqrestore(&mapping->tree_lock, flags);
- /*
- * We can continue to use `mapping' here because the
- * page is locked, which pins the address_space
- */
- if (mapping_cap_account_dirty(mapping)) {
- page_mkclean(page);
- dec_zone_page_state(page, NR_FILE_DIRTY);
- }
- return 1;
- }
+ if (!mapping)
+ return TestClearPageDirty(page);
+
+ write_lock_irqsave(&mapping->tree_lock, flags);
+ if (TestClearPageDirty(page)) {
+ radix_tree_tag_clear(&mapping->page_tree,
+ page_index(page), PAGECACHE_TAG_DIRTY);
write_unlock_irqrestore(&mapping->tree_lock, flags);
- return 0;
+ /*
+ * We can continue to use `mapping' here because the
+ * page is locked, which pins the address_space
+ */
+ if (mapping_cap_account_dirty(mapping)) {
+ page_mkclean(page);
+ dec_zone_page_state(page, NR_FILE_DIRTY);
+ }
+ return 1;
}
- return TestClearPageDirty(page);
+ write_unlock_irqrestore(&mapping->tree_lock, flags);
+ return 0;
}
EXPORT_SYMBOL(test_clear_page_dirty);
{
struct address_space *mapping = page_mapping(page);
- if (mapping) {
- if (TestClearPageDirty(page)) {
- if (mapping_cap_account_dirty(mapping)) {
- page_mkclean(page);
- dec_zone_page_state(page, NR_FILE_DIRTY);
- }
- return 1;
+ if (!mapping)
+ return TestClearPageDirty(page);
+
+ if (TestClearPageDirty(page)) {
+ if (mapping_cap_account_dirty(mapping)) {
+ page_mkclean(page);
+ dec_zone_page_state(page, NR_FILE_DIRTY);
}
- return 0;
+ return 1;
}
- return TestClearPageDirty(page);
+ return 0;
}
EXPORT_SYMBOL(clear_page_dirty_for_io);
#include <linux/sort.h>
#include <linux/pfn.h>
#include <linux/backing-dev.h>
+#include <linux/fault-inject.h>
#include <asm/tlbflush.h>
#include <asm/div64.h>
#define ALLOC_HIGH 0x20 /* __GFP_HIGH set */
#define ALLOC_CPUSET 0x40 /* check for correct cpuset */
+#ifdef CONFIG_FAIL_PAGE_ALLOC
+
+static struct fail_page_alloc_attr {
+ struct fault_attr attr;
+
+ u32 ignore_gfp_highmem;
+ u32 ignore_gfp_wait;
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+ struct dentry *ignore_gfp_highmem_file;
+ struct dentry *ignore_gfp_wait_file;
+
+#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+} fail_page_alloc = {
+ .attr = FAULT_ATTR_INITIALIZER,
+ .ignore_gfp_wait = 1,
+ .ignore_gfp_highmem = 1,
+};
+
+static int __init setup_fail_page_alloc(char *str)
+{
+ return setup_fault_attr(&fail_page_alloc.attr, str);
+}
+__setup("fail_page_alloc=", setup_fail_page_alloc);
+
+static int should_fail_alloc_page(gfp_t gfp_mask, unsigned int order)
+{
+ if (gfp_mask & __GFP_NOFAIL)
+ return 0;
+ if (fail_page_alloc.ignore_gfp_highmem && (gfp_mask & __GFP_HIGHMEM))
+ return 0;
+ if (fail_page_alloc.ignore_gfp_wait && (gfp_mask & __GFP_WAIT))
+ return 0;
+
+ return should_fail(&fail_page_alloc.attr, 1 << order);
+}
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+static int __init fail_page_alloc_debugfs(void)
+{
+ mode_t mode = S_IFREG | S_IRUSR | S_IWUSR;
+ struct dentry *dir;
+ int err;
+
+ err = init_fault_attr_dentries(&fail_page_alloc.attr,
+ "fail_page_alloc");
+ if (err)
+ return err;
+ dir = fail_page_alloc.attr.dentries.dir;
+
+ fail_page_alloc.ignore_gfp_wait_file =
+ debugfs_create_bool("ignore-gfp-wait", mode, dir,
+ &fail_page_alloc.ignore_gfp_wait);
+
+ fail_page_alloc.ignore_gfp_highmem_file =
+ debugfs_create_bool("ignore-gfp-highmem", mode, dir,
+ &fail_page_alloc.ignore_gfp_highmem);
+
+ if (!fail_page_alloc.ignore_gfp_wait_file ||
+ !fail_page_alloc.ignore_gfp_highmem_file) {
+ err = -ENOMEM;
+ debugfs_remove(fail_page_alloc.ignore_gfp_wait_file);
+ debugfs_remove(fail_page_alloc.ignore_gfp_highmem_file);
+ cleanup_fault_attr_dentries(&fail_page_alloc.attr);
+ }
+
+ return err;
+}
+
+late_initcall(fail_page_alloc_debugfs);
+
+#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+#else /* CONFIG_FAIL_PAGE_ALLOC */
+
+static inline int should_fail_alloc_page(gfp_t gfp_mask, unsigned int order)
+{
+ return 0;
+}
+
+#endif /* CONFIG_FAIL_PAGE_ALLOC */
+
/*
* Return 1 if free pages are above 'mark'. This takes into account the order
* of the allocation.
zone->zone_pgdat != zonelist->zones[0]->zone_pgdat))
break;
if ((alloc_flags & ALLOC_CPUSET) &&
- !cpuset_zone_allowed(zone, gfp_mask))
+ !cpuset_zone_allowed_softwall(zone, gfp_mask))
goto try_next_zone;
if (!(alloc_flags & ALLOC_NO_WATERMARKS)) {
might_sleep_if(wait);
+ if (should_fail_alloc_page(gfp_mask, order))
+ return NULL;
+
restart:
z = zonelist->zones; /* the list of zones suitable for gfp_mask */
if (numentries > max)
numentries = max;
- log2qty = long_log2(numentries);
+ log2qty = ilog2(numentries);
do {
size = bucketsize << log2qty;
printk("%s hash table entries: %d (order: %d, %lu bytes)\n",
tablename,
(1U << log2qty),
- long_log2(size) - PAGE_SHIFT,
+ ilog2(size) - PAGE_SHIFT,
size);
if (_hash_shift)
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
+#include <linux/task_io_accounting_ops.h>
#include <linux/pagevec.h>
void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
put_pages_list(pages);
break;
}
+ task_io_account_read(PAGE_CACHE_SIZE);
}
pagevec_lru_add(&lru_pvec);
return ret;
*
* Note that @filp is purely used for passing on to the ->readpage[s]()
* handler: it may refer to a different file from @mapping (so we may not use
- * @filp->f_mapping or @filp->f_dentry->d_inode here).
+ * @filp->f_mapping or @filp->f_path.dentry->d_inode here).
* Also, @ra may not be equal to &@filp->f_ra.
*
*/
struct page *shmem_nopage(struct vm_area_struct *vma, unsigned long address, int *type)
{
- struct inode *inode = vma->vm_file->f_dentry->d_inode;
+ struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
struct page *page = NULL;
unsigned long idx;
int error;
unsigned long addr, unsigned long len,
pgprot_t prot, unsigned long pgoff, int nonblock)
{
- struct inode *inode = vma->vm_file->f_dentry->d_inode;
+ struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
struct mm_struct *mm = vma->vm_mm;
enum sgp_type sgp = nonblock? SGP_QUICK: SGP_CACHE;
unsigned long size;
#ifdef CONFIG_NUMA
int shmem_set_policy(struct vm_area_struct *vma, struct mempolicy *new)
{
- struct inode *i = vma->vm_file->f_dentry->d_inode;
+ struct inode *i = vma->vm_file->f_path.dentry->d_inode;
return mpol_set_shared_policy(&SHMEM_I(i)->policy, vma, new);
}
struct mempolicy *
shmem_get_policy(struct vm_area_struct *vma, unsigned long addr)
{
- struct inode *i = vma->vm_file->f_dentry->d_inode;
+ struct inode *i = vma->vm_file->f_path.dentry->d_inode;
unsigned long idx;
idx = ((addr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
int shmem_lock(struct file *file, int lock, struct user_struct *user)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct shmem_inode_info *info = SHMEM_I(inode);
int retval = -ENOMEM;
static ssize_t
shmem_file_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
loff_t pos;
unsigned long written;
ssize_t err;
if (err || !count)
goto out;
- err = remove_suid(file->f_dentry);
+ err = remove_suid(file->f_path.dentry);
if (err)
goto out;
static void do_shmem_file_read(struct file *filp, loff_t *ppos, read_descriptor_t *desc, read_actor_t actor)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct address_space *mapping = inode->i_mapping;
unsigned long index, offset;
d_instantiate(dentry, inode);
inode->i_size = size;
inode->i_nlink = 0; /* It is unlinked */
- file->f_vfsmnt = mntget(shm_mnt);
- file->f_dentry = dentry;
+ file->f_path.mnt = mntget(shm_mnt);
+ file->f_path.dentry = dentry;
file->f_mapping = inode->i_mapping;
file->f_op = &shmem_file_operations;
file->f_mode = FMODE_WRITE | FMODE_READ;
#include <linux/nodemask.h>
#include <linux/mempolicy.h>
#include <linux/mutex.h>
+#include <linux/fault-inject.h>
#include <linux/rtmutex.h>
+#include <linux/reciprocal_div.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
unsigned int shared;
unsigned int buffer_size;
+ u32 reciprocal_buffer_size;
/* 3) touched by every alloc & free from the backend */
struct kmem_list3 *nodelists[MAX_NUMNODES];
return slab->s_mem + cache->buffer_size * idx;
}
-static inline unsigned int obj_to_index(struct kmem_cache *cache,
- struct slab *slab, void *obj)
+/*
+ * We want to avoid an expensive divide : (offset / cache->buffer_size)
+ * Using the fact that buffer_size is a constant for a particular cache,
+ * we can replace (offset / cache->buffer_size) by
+ * reciprocal_divide(offset, cache->reciprocal_buffer_size)
+ */
+static inline unsigned int obj_to_index(const struct kmem_cache *cache,
+ const struct slab *slab, void *obj)
{
- return (unsigned)(obj - slab->s_mem) / cache->buffer_size;
+ u32 offset = (obj - slab->s_mem);
+ return reciprocal_divide(offset, cache->reciprocal_buffer_size);
}
/*
if (keventd_up() && reap_work->work.func == NULL) {
init_reap_node(cpu);
INIT_DELAYED_WORK(reap_work, cache_reap);
- schedule_delayed_work_on(cpu, reap_work, HZ + 3 * cpu);
+ schedule_delayed_work_on(cpu, reap_work,
+ __round_jiffies_relative(HZ, cpu));
}
}
cache_cache.buffer_size = ALIGN(cache_cache.buffer_size,
cache_line_size());
+ cache_cache.reciprocal_buffer_size =
+ reciprocal_value(cache_cache.buffer_size);
for (order = 0; order < MAX_ORDER; order++) {
cache_estimate(order, cache_cache.buffer_size,
if (flags & SLAB_CACHE_DMA)
cachep->gfpflags |= GFP_DMA;
cachep->buffer_size = size;
+ cachep->reciprocal_buffer_size = reciprocal_value(size);
if (flags & CFLGS_OFF_SLAB) {
cachep->slabp_cache = kmem_find_general_cachep(slab_size, 0u);
#define cache_alloc_debugcheck_after(a,b,objp,d) (objp)
#endif
+#ifdef CONFIG_FAILSLAB
+
+static struct failslab_attr {
+
+ struct fault_attr attr;
+
+ u32 ignore_gfp_wait;
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+ struct dentry *ignore_gfp_wait_file;
+#endif
+
+} failslab = {
+ .attr = FAULT_ATTR_INITIALIZER,
+ .ignore_gfp_wait = 1,
+};
+
+static int __init setup_failslab(char *str)
+{
+ return setup_fault_attr(&failslab.attr, str);
+}
+__setup("failslab=", setup_failslab);
+
+static int should_failslab(struct kmem_cache *cachep, gfp_t flags)
+{
+ if (cachep == &cache_cache)
+ return 0;
+ if (flags & __GFP_NOFAIL)
+ return 0;
+ if (failslab.ignore_gfp_wait && (flags & __GFP_WAIT))
+ return 0;
+
+ return should_fail(&failslab.attr, obj_size(cachep));
+}
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+static int __init failslab_debugfs(void)
+{
+ mode_t mode = S_IFREG | S_IRUSR | S_IWUSR;
+ struct dentry *dir;
+ int err;
+
+ err = init_fault_attr_dentries(&failslab.attr, "failslab");
+ if (err)
+ return err;
+ dir = failslab.attr.dentries.dir;
+
+ failslab.ignore_gfp_wait_file =
+ debugfs_create_bool("ignore-gfp-wait", mode, dir,
+ &failslab.ignore_gfp_wait);
+
+ if (!failslab.ignore_gfp_wait_file) {
+ err = -ENOMEM;
+ debugfs_remove(failslab.ignore_gfp_wait_file);
+ cleanup_fault_attr_dentries(&failslab.attr);
+ }
+
+ return err;
+}
+
+late_initcall(failslab_debugfs);
+
+#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+#else /* CONFIG_FAILSLAB */
+
+static inline int should_failslab(struct kmem_cache *cachep, gfp_t flags)
+{
+ return 0;
+}
+
+#endif /* CONFIG_FAILSLAB */
+
static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags)
{
void *objp;
struct array_cache *ac;
check_irq_off();
+
+ if (should_failslab(cachep, flags))
+ return NULL;
+
ac = cpu_cache_get(cachep);
if (likely(ac->avail)) {
STATS_INC_ALLOCHIT(cachep);
struct zone **z;
void *obj = NULL;
int nid;
+ gfp_t local_flags = (flags & GFP_LEVEL_MASK);
retry:
/*
for (z = zonelist->zones; *z && !obj; z++) {
nid = zone_to_nid(*z);
- if (cpuset_zone_allowed(*z, flags) &&
+ if (cpuset_zone_allowed_hardwall(*z, flags) &&
cache->nodelists[nid] &&
cache->nodelists[nid]->free_objects)
obj = ____cache_alloc_node(cache,
* We may trigger various forms of reclaim on the allowed
* set and go into memory reserves if necessary.
*/
+ if (local_flags & __GFP_WAIT)
+ local_irq_enable();
+ kmem_flagcheck(cache, flags);
obj = kmem_getpages(cache, flags, -1);
+ if (local_flags & __GFP_WAIT)
+ local_irq_disable();
if (obj) {
/*
* Insert into the appropriate per node queues
*
* Currently only used for dentry validation.
*/
-int fastcall kmem_ptr_validate(struct kmem_cache *cachep, void *ptr)
+int fastcall kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr)
{
unsigned long addr = (unsigned long)ptr;
unsigned long min_addr = PAGE_OFFSET;
if (!mutex_trylock(&cache_chain_mutex)) {
/* Give up. Setup the next iteration. */
schedule_delayed_work(&__get_cpu_var(reap_work),
- REAPTIMEOUT_CPUC);
+ round_jiffies_relative(REAPTIMEOUT_CPUC));
return;
}
next_reap_node();
refresh_cpu_vm_stats(smp_processor_id());
/* Set up the next iteration */
- schedule_delayed_work(&__get_cpu_var(reap_work), REAPTIMEOUT_CPUC);
+ schedule_delayed_work(&__get_cpu_var(reap_work),
+ round_jiffies_relative(REAPTIMEOUT_CPUC));
}
#ifdef CONFIG_PROC_FS
return order;
}
-void *kmalloc(size_t size, gfp_t gfp)
+void *__kmalloc(size_t size, gfp_t gfp)
{
slob_t *m;
bigblock_t *bb;
slob_free(bb, sizeof(bigblock_t));
return 0;
}
-
-EXPORT_SYMBOL(kmalloc);
+EXPORT_SYMBOL(__kmalloc);
void kfree(const void *block)
{
static struct timer_list slob_timer = TIMER_INITIALIZER(
(void (*)(unsigned long))kmem_cache_init, 0, 0);
+int kmem_cache_shrink(struct kmem_cache *d)
+{
+ return 0;
+}
+EXPORT_SYMBOL(kmem_cache_shrink);
+
+int kmem_ptr_validate(struct kmem_cache *a, const void *b)
+{
+ return 0;
+}
+
void kmem_cache_init(void)
{
void *p = slob_alloc(PAGE_SIZE, 0, PAGE_SIZE-1);
}
file = ptr->swap_file;
- len = seq_path(swap, file->f_vfsmnt, file->f_dentry, " \t\n\\");
+ len = seq_path(swap, file->f_path.mnt, file->f_path.dentry, " \t\n\\");
seq_printf(swap, "%*s%s\t%u\t%u\t%d\n",
len < 40 ? 40 - len : 1, " ",
- S_ISBLK(file->f_dentry->d_inode->i_mode) ?
+ S_ISBLK(file->f_path.dentry->d_inode->i_mode) ?
"partition" : "file\t",
ptr->pages << (PAGE_SHIFT - 10),
ptr->inuse_pages << (PAGE_SHIFT - 10),
d_instantiate(dentry, inode);
inode->i_nlink = 0; /* It is unlinked */
- file->f_vfsmnt = mntget(shm_mnt);
- file->f_dentry = dentry;
+ file->f_path.mnt = mntget(shm_mnt);
+ file->f_path.dentry = dentry;
file->f_mapping = inode->i_mapping;
file->f_op = &ramfs_file_operations;
file->f_mode = FMODE_WRITE | FMODE_READ;
#include <linux/module.h>
#include <linux/pagemap.h>
#include <linux/pagevec.h>
+#include <linux/task_io_accounting_ops.h>
#include <linux/buffer_head.h> /* grr. try_to_release_page,
do_invalidatepage */
if (PagePrivate(page))
do_invalidatepage(page, 0);
- clear_page_dirty(page);
+ if (test_clear_page_dirty(page))
+ task_io_account_cancelled_write(PAGE_CACHE_SIZE);
ClearPageUptodate(page);
ClearPageMappedToDisk(page);
remove_from_page_cache(page);
if (!populated_zone(zone))
continue;
- if (!cpuset_zone_allowed(zone, __GFP_HARDWALL))
+ if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
continue;
note_zone_scanning_priority(zone, priority);
for (i = 0; zones[i] != NULL; i++) {
struct zone *zone = zones[i];
- if (!cpuset_zone_allowed(zone, __GFP_HARDWALL))
+ if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
continue;
lru_pages += zone->nr_active + zone->nr_inactive;
for (i = 0; zones[i] != 0; i++) {
struct zone *zone = zones[i];
- if (!cpuset_zone_allowed(zone, __GFP_HARDWALL))
+ if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
continue;
zone->prev_priority = priority;
return;
if (pgdat->kswapd_max_order < order)
pgdat->kswapd_max_order = order;
- if (!cpuset_zone_allowed(zone, __GFP_HARDWALL))
+ if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
return;
if (!waitqueue_active(&pgdat->kswapd_wait))
return;
if (count == 0) return 0;
page = get_zeroed_page(GFP_KERNEL);
if (!page) return -ENOMEM;
- dev = PDE(file->f_dentry->d_inode)->data;
+ dev = PDE(file->f_path.dentry->d_inode)->data;
if (!dev->ops->proc_read)
length = -EINVAL;
else {
#include <linux/interrupt.h>
/*
- * The null address is defined as a callsign of all spaces with an
- * SSID of zero.
+ * The default broadcast address of an interface is QST-0; the default address
+ * is LINUX-1. The null address is defined as a callsign of all spaces with
+ * an SSID of zero.
*/
-ax25_address null_ax25_address = {{0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00}};
+const ax25_address ax25_bcast =
+ {{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, 0 << 1}};
+const ax25_address ax25_defaddr =
+ {{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, 1 << 1}};
+const ax25_address null_ax25_address =
+ {{' ' << 1, ' ' << 1, ' ' << 1, ' ' << 1, ' ' << 1, ' ' << 1, 0 << 1}};
+
+EXPORT_SYMBOL_GPL(ax25_bcast);
+EXPORT_SYMBOL_GPL(ax25_defaddr);
EXPORT_SYMBOL(null_ax25_address);
/*
* ax25 -> ascii conversion
*/
-char *ax2asc(char *buf, ax25_address *a)
+char *ax2asc(char *buf, const ax25_address *a)
{
char c, *s;
int n;
/*
* ascii -> ax25 conversion
*/
-void asc2ax(ax25_address *addr, char *callsign)
+void asc2ax(ax25_address *addr, const char *callsign)
{
- char *s;
+ const char *s;
int n;
for (s = callsign, n = 0; n < 6; n++) {
/*
* Compare two ax.25 addresses
*/
-int ax25cmp(ax25_address *a, ax25_address *b)
+int ax25cmp(const ax25_address *a, const ax25_address *b)
{
int ct = 0;
/*
* Compare two AX.25 digipeater paths.
*/
-int ax25digicmp(ax25_digi *digi1, ax25_digi *digi2)
+int ax25digicmp(const ax25_digi *digi1, const ax25_digi *digi2)
{
int i;
* Given an AX.25 address pull of to, from, digi list, command/response and the start of data
*
*/
-unsigned char *ax25_addr_parse(unsigned char *buf, int len, ax25_address *src, ax25_address *dest, ax25_digi *digi, int *flags, int *dama)
+const unsigned char *ax25_addr_parse(const unsigned char *buf, int len,
+ ax25_address *src, ax25_address *dest, ax25_digi *digi, int *flags,
+ int *dama)
{
int d = 0;
/*
* Assemble an AX.25 header from the bits
*/
-int ax25_addr_build(unsigned char *buf, ax25_address *src, ax25_address *dest, ax25_digi *d, int flag, int modulus)
+int ax25_addr_build(unsigned char *buf, const ax25_address *src,
+ const ax25_address *dest, const ax25_digi *d, int flag, int modulus)
{
int len = 0;
int ct = 0;
return len;
}
-int ax25_addr_size(ax25_digi *dp)
+int ax25_addr_size(const ax25_digi *dp)
{
if (dp == NULL)
return 2 * AX25_ADDR_LEN;
/*
* Reverse Digipeat List. May not pass both parameters as same struct
*/
-void ax25_digi_invert(ax25_digi *in, ax25_digi *out)
+void ax25_digi_invert(const ax25_digi *in, ax25_digi *out)
{
int ct;
if (flt->opcode &&
((evt == HCI_EV_CMD_COMPLETE &&
flt->opcode !=
- get_unaligned((__u16 *)(skb->data + 3))) ||
+ get_unaligned((__le16 *)(skb->data + 3))) ||
(evt == HCI_EV_CMD_STATUS &&
flt->opcode !=
- get_unaligned((__u16 *)(skb->data + 4)))))
+ get_unaligned((__le16 *)(skb->data + 4)))))
continue;
}
return -ENOIOCTLCMD;
}
-static void rfcomm_tty_set_termios(struct tty_struct *tty, struct termios *old)
+static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
- struct termios *new = (struct termios *) tty->termios;
+ struct ktermios *new = tty->termios;
int old_baud_rate = tty_termios_baud_rate(old);
int new_baud_rate = tty_termios_baud_rate(new);
#define brnf_filter_vlan_tagged 1
#endif
-int brnf_deferred_hooks;
-EXPORT_SYMBOL_GPL(brnf_deferred_hooks);
-
static __be16 inline vlan_proto(const struct sk_buff *skb)
{
return vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
return NF_STOLEN;
}
-/* PF_BRIDGE/LOCAL_OUT ***********************************************/
-static int br_nf_local_out_finish(struct sk_buff *skb)
-{
- if (skb->protocol == htons(ETH_P_8021Q)) {
- skb_push(skb, VLAN_HLEN);
- skb->nh.raw -= VLAN_HLEN;
- }
-
- NF_HOOK_THRESH(PF_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
- br_forward_finish, NF_BR_PRI_FIRST + 1);
-
- return 0;
-}
-
-/* This function sees both locally originated IP packets and forwarded
+/* PF_BRIDGE/LOCAL_OUT ***********************************************
+ *
+ * This function sees both locally originated IP packets and forwarded
* IP packets (in both cases the destination device is a bridge
* device). It also sees bridged-and-DNAT'ed packets.
- * To be able to filter on the physical bridge devices (with the physdev
- * module), we steal packets destined to a bridge device away from the
- * PF_INET/FORWARD and PF_INET/OUTPUT hook functions, and give them back later,
- * when we have determined the real output device. This is done in here.
*
* If (nf_bridge->mask & BRNF_BRIDGED_DNAT) then the packet is bridged
* and we fake the PF_BRIDGE/FORWARD hook. The function br_nf_forward()
* will then fake the PF_INET/FORWARD hook. br_nf_local_out() has priority
* NF_BR_PRI_FIRST, so no relevant PF_BRIDGE/INPUT functions have been nor
* will be executed.
- * Otherwise, if nf_bridge->physindev is NULL, the bridge-nf code never touched
- * this packet before, and so the packet was locally originated. We fake
- * the PF_INET/LOCAL_OUT hook.
- * Finally, if nf_bridge->physindev isn't NULL, then the packet was IP routed,
- * so we fake the PF_INET/FORWARD hook. ip_sabotage_out() makes sure
- * even routed packets that didn't arrive on a bridge interface have their
- * nf_bridge->physindev set. */
+ */
static unsigned int br_nf_local_out(unsigned int hook, struct sk_buff **pskb,
const struct net_device *in,
const struct net_device *out,
int (*okfn)(struct sk_buff *))
{
- struct net_device *realindev, *realoutdev;
+ struct net_device *realindev;
struct sk_buff *skb = *pskb;
struct nf_bridge_info *nf_bridge;
- int pf;
if (!skb->nf_bridge)
return NF_ACCEPT;
- if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb))
- pf = PF_INET;
- else
- pf = PF_INET6;
-
nf_bridge = skb->nf_bridge;
- nf_bridge->physoutdev = skb->dev;
- realindev = nf_bridge->physindev;
+ if (!(nf_bridge->mask & BRNF_BRIDGED_DNAT))
+ return NF_ACCEPT;
/* Bridged, take PF_BRIDGE/FORWARD.
* (see big note in front of br_nf_pre_routing_finish) */
- if (nf_bridge->mask & BRNF_BRIDGED_DNAT) {
- if (nf_bridge->mask & BRNF_PKT_TYPE) {
- skb->pkt_type = PACKET_OTHERHOST;
- nf_bridge->mask ^= BRNF_PKT_TYPE;
- }
- if (skb->protocol == htons(ETH_P_8021Q)) {
- skb_push(skb, VLAN_HLEN);
- skb->nh.raw -= VLAN_HLEN;
- }
+ nf_bridge->physoutdev = skb->dev;
+ realindev = nf_bridge->physindev;
- NF_HOOK(PF_BRIDGE, NF_BR_FORWARD, skb, realindev,
- skb->dev, br_forward_finish);
- goto out;
+ if (nf_bridge->mask & BRNF_PKT_TYPE) {
+ skb->pkt_type = PACKET_OTHERHOST;
+ nf_bridge->mask ^= BRNF_PKT_TYPE;
}
- realoutdev = bridge_parent(skb->dev);
- if (!realoutdev)
- return NF_DROP;
-
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
- /* iptables should match -o br0.x */
- if (nf_bridge->netoutdev)
- realoutdev = nf_bridge->netoutdev;
-#endif
if (skb->protocol == htons(ETH_P_8021Q)) {
- skb_pull(skb, VLAN_HLEN);
- (*pskb)->nh.raw += VLAN_HLEN;
- }
- /* IP forwarded traffic has a physindev, locally
- * generated traffic hasn't. */
- if (realindev != NULL) {
- if (!(nf_bridge->mask & BRNF_DONT_TAKE_PARENT)) {
- struct net_device *parent = bridge_parent(realindev);
- if (parent)
- realindev = parent;
- }
-
- NF_HOOK_THRESH(pf, NF_IP_FORWARD, skb, realindev,
- realoutdev, br_nf_local_out_finish,
- NF_IP_PRI_BRIDGE_SABOTAGE_FORWARD + 1);
- } else {
- NF_HOOK_THRESH(pf, NF_IP_LOCAL_OUT, skb, realindev,
- realoutdev, br_nf_local_out_finish,
- NF_IP_PRI_BRIDGE_SABOTAGE_LOCAL_OUT + 1);
+ skb_push(skb, VLAN_HLEN);
+ skb->nh.raw -= VLAN_HLEN;
}
-out:
+ NF_HOOK(PF_BRIDGE, NF_BR_FORWARD, skb, realindev, skb->dev,
+ br_forward_finish);
return NF_STOLEN;
}
return NF_ACCEPT;
}
-/* Postpone execution of PF_INET(6)/FORWARD, PF_INET(6)/LOCAL_OUT
- * and PF_INET(6)/POST_ROUTING until we have done the forwarding
- * decision in the bridge code and have determined nf_bridge->physoutdev. */
-static unsigned int ip_sabotage_out(unsigned int hook, struct sk_buff **pskb,
- const struct net_device *in,
- const struct net_device *out,
- int (*okfn)(struct sk_buff *))
-{
- struct sk_buff *skb = *pskb;
-
- if ((out->hard_start_xmit == br_dev_xmit &&
- okfn != br_nf_forward_finish &&
- okfn != br_nf_local_out_finish && okfn != br_nf_dev_queue_xmit)
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
- || ((out->priv_flags & IFF_802_1Q_VLAN) &&
- VLAN_DEV_INFO(out)->real_dev->hard_start_xmit == br_dev_xmit)
-#endif
- ) {
- struct nf_bridge_info *nf_bridge;
-
- if (!skb->nf_bridge) {
-#ifdef CONFIG_SYSCTL
- /* This code is executed while in the IP(v6) stack,
- the version should be 4 or 6. We can't use
- skb->protocol because that isn't set on
- PF_INET(6)/LOCAL_OUT. */
- struct iphdr *ip = skb->nh.iph;
-
- if (ip->version == 4 && !brnf_call_iptables)
- return NF_ACCEPT;
- else if (ip->version == 6 && !brnf_call_ip6tables)
- return NF_ACCEPT;
- else if (!brnf_deferred_hooks)
- return NF_ACCEPT;
-#endif
- if (hook == NF_IP_POST_ROUTING)
- return NF_ACCEPT;
- if (!nf_bridge_alloc(skb))
- return NF_DROP;
- }
-
- nf_bridge = skb->nf_bridge;
-
- /* This frame will arrive on PF_BRIDGE/LOCAL_OUT and we
- * will need the indev then. For a brouter, the real indev
- * can be a bridge port, so we make sure br_nf_local_out()
- * doesn't use the bridge parent of the indev by using
- * the BRNF_DONT_TAKE_PARENT mask. */
- if (hook == NF_IP_FORWARD && nf_bridge->physindev == NULL) {
- nf_bridge->mask |= BRNF_DONT_TAKE_PARENT;
- nf_bridge->physindev = (struct net_device *)in;
- }
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
- /* the iptables outdev is br0.x, not br0 */
- if (out->priv_flags & IFF_802_1Q_VLAN)
- nf_bridge->netoutdev = (struct net_device *)out;
-#endif
- return NF_STOP;
- }
-
- return NF_ACCEPT;
-}
-
/* For br_nf_local_out we need (prio = NF_BR_PRI_FIRST), to insure that innocent
* PF_BRIDGE/NF_BR_LOCAL_OUT functions don't get bridged traffic as input.
* For br_nf_post_routing, we need (prio = NF_BR_PRI_LAST), because
.pf = PF_INET6,
.hooknum = NF_IP6_PRE_ROUTING,
.priority = NF_IP6_PRI_FIRST, },
- { .hook = ip_sabotage_out,
- .owner = THIS_MODULE,
- .pf = PF_INET,
- .hooknum = NF_IP_FORWARD,
- .priority = NF_IP_PRI_BRIDGE_SABOTAGE_FORWARD, },
- { .hook = ip_sabotage_out,
- .owner = THIS_MODULE,
- .pf = PF_INET6,
- .hooknum = NF_IP6_FORWARD,
- .priority = NF_IP6_PRI_BRIDGE_SABOTAGE_FORWARD, },
- { .hook = ip_sabotage_out,
- .owner = THIS_MODULE,
- .pf = PF_INET,
- .hooknum = NF_IP_LOCAL_OUT,
- .priority = NF_IP_PRI_BRIDGE_SABOTAGE_LOCAL_OUT, },
- { .hook = ip_sabotage_out,
- .owner = THIS_MODULE,
- .pf = PF_INET6,
- .hooknum = NF_IP6_LOCAL_OUT,
- .priority = NF_IP6_PRI_BRIDGE_SABOTAGE_LOCAL_OUT, },
- { .hook = ip_sabotage_out,
- .owner = THIS_MODULE,
- .pf = PF_INET,
- .hooknum = NF_IP_POST_ROUTING,
- .priority = NF_IP_PRI_FIRST, },
- { .hook = ip_sabotage_out,
- .owner = THIS_MODULE,
- .pf = PF_INET6,
- .hooknum = NF_IP6_POST_ROUTING,
- .priority = NF_IP6_PRI_FIRST, },
};
#ifdef CONFIG_SYSCTL
while ((hh = neigh->hh) != NULL) {
neigh->hh = hh->hh_next;
hh->hh_next = NULL;
- write_lock_bh(&hh->hh_lock);
+
+ write_seqlock_bh(&hh->hh_lock);
hh->hh_output = neigh_blackhole;
- write_unlock_bh(&hh->hh_lock);
+ write_sequnlock_bh(&hh->hh_lock);
if (atomic_dec_and_test(&hh->hh_refcnt))
kfree(hh);
}
if (update) {
for (hh = neigh->hh; hh; hh = hh->hh_next) {
- write_lock_bh(&hh->hh_lock);
+ write_seqlock_bh(&hh->hh_lock);
update(hh, neigh->dev, neigh->ha);
- write_unlock_bh(&hh->hh_lock);
+ write_sequnlock_bh(&hh->hh_lock);
}
}
}
break;
if (!hh && (hh = kzalloc(sizeof(*hh), GFP_ATOMIC)) != NULL) {
- rwlock_init(&hh->hh_lock);
+ seqlock_init(&hh->hh_lock);
hh->hh_type = protocol;
atomic_set(&hh->hh_refcnt, 0);
hh->hh_next = NULL;
struct netpoll_info *npinfo =
container_of(work, struct netpoll_info, tx_work.work);
struct sk_buff *skb;
+ unsigned long flags;
while ((skb = skb_dequeue(&npinfo->txq))) {
struct net_device *dev = skb->dev;
continue;
}
- netif_tx_lock_bh(dev);
+ local_irq_save(flags);
+ netif_tx_lock(dev);
if (netif_queue_stopped(dev) ||
dev->hard_start_xmit(skb, dev) != NETDEV_TX_OK) {
skb_queue_head(&npinfo->txq, skb);
- netif_tx_unlock_bh(dev);
+ netif_tx_unlock(dev);
+ local_irq_restore(flags);
schedule_delayed_work(&npinfo->tx_work, HZ/10);
return;
}
+ netif_tx_unlock(dev);
+ local_irq_restore(flags);
}
}
/* don't get messages out of order, and no recursion */
if (skb_queue_len(&npinfo->txq) == 0 &&
- npinfo->poll_owner != smp_processor_id() &&
- netif_tx_trylock(dev)) {
- /* try until next clock tick */
- for (tries = jiffies_to_usecs(1)/USEC_PER_POLL; tries > 0; --tries) {
- if (!netif_queue_stopped(dev))
- status = dev->hard_start_xmit(skb, dev);
+ npinfo->poll_owner != smp_processor_id()) {
+ unsigned long flags;
- if (status == NETDEV_TX_OK)
- break;
+ local_irq_save(flags);
+ if (netif_tx_trylock(dev)) {
+ /* try until next clock tick */
+ for (tries = jiffies_to_usecs(1)/USEC_PER_POLL;
+ tries > 0; --tries) {
+ if (!netif_queue_stopped(dev))
+ status = dev->hard_start_xmit(skb, dev);
- /* tickle device maybe there is some cleanup */
- netpoll_poll(np);
+ if (status == NETDEV_TX_OK)
+ break;
+
+ /* tickle device maybe there is some cleanup */
+ netpoll_poll(np);
- udelay(USEC_PER_POLL);
+ udelay(USEC_PER_POLL);
+ }
+ netif_tx_unlock(dev);
}
- netif_tx_unlock(dev);
+ local_irq_restore(flags);
}
if (status != NETDEV_TX_OK) {
unsigned char *arp_ptr;
int size, type = ARPOP_REPLY, ptype = ETH_P_ARP;
__be32 sip, tip;
+ unsigned char *sha;
struct sk_buff *send_skb;
struct netpoll *np = NULL;
arp->ar_op != htons(ARPOP_REQUEST))
return;
- arp_ptr = (unsigned char *)(arp+1) + skb->dev->addr_len;
+ arp_ptr = (unsigned char *)(arp+1);
+ /* save the location of the src hw addr */
+ sha = arp_ptr;
+ arp_ptr += skb->dev->addr_len;
memcpy(&sip, arp_ptr, 4);
- arp_ptr += 4 + skb->dev->addr_len;
+ arp_ptr += 4;
+ /* if we actually cared about dst hw addr, it would get copied here */
+ arp_ptr += skb->dev->addr_len;
memcpy(&tip, arp_ptr, 4);
/* Should we ignore arp? */
if (np->dev->hard_header &&
np->dev->hard_header(send_skb, skb->dev, ptype,
- np->remote_mac, np->local_mac,
+ sha, np->local_mac,
send_skb->len) < 0) {
kfree_skb(send_skb);
return;
arp_ptr += np->dev->addr_len;
memcpy(arp_ptr, &tip, 4);
arp_ptr += 4;
- memcpy(arp_ptr, np->remote_mac, np->dev->addr_len);
+ memcpy(arp_ptr, sha, np->dev->addr_len);
arp_ptr += np->dev->addr_len;
memcpy(arp_ptr, &sip, 4);
gap = -new_head;
}
new_head += DCCP_MAX_ACKVEC_LEN;
- }
+ }
av->dccpav_buf_head = new_head;
void dccp_ackvector_print(const u64 ackno, const unsigned char *vector, int len)
{
dccp_pr_debug_cat("ACK vector len=%d, ackno=%llu |", len,
- (unsigned long long)ackno);
+ (unsigned long long)ackno);
while (len--) {
const u8 state = (*vector & DCCP_ACKVEC_STATE_MASK) >> 6;
unsigned char* value);
int (*ccid_hc_rx_insert_options)(struct sock *sk,
struct sk_buff *skb);
- int (*ccid_hc_tx_insert_options)(struct sock *sk,
- struct sk_buff *skb);
void (*ccid_hc_tx_packet_recv)(struct sock *sk,
struct sk_buff *skb);
int (*ccid_hc_tx_parse_options)(struct sock *sk,
return rc;
}
-static inline int ccid_hc_tx_insert_options(struct ccid *ccid, struct sock *sk,
- struct sk_buff *skb)
-{
- if (ccid->ccid_ops->ccid_hc_tx_insert_options != NULL)
- return ccid->ccid_ops->ccid_hc_tx_insert_options(sk, skb);
- return 0;
-}
-
static inline int ccid_hc_rx_insert_options(struct ccid *ccid, struct sock *sk,
struct sk_buff *skb)
{
while (seqp != hctx->ccid2hctx_seqh) {
ccid2_pr_debug("out seq=%llu acked=%d time=%lu\n",
- (unsigned long long)seqp->ccid2s_seq,
+ (unsigned long long)seqp->ccid2s_seq,
seqp->ccid2s_acked, seqp->ccid2s_sent);
seqp = seqp->ccid2s_next;
}
/* first measurement */
if (hctx->ccid2hctx_srtt == -1) {
ccid2_pr_debug("R: %lu Time=%lu seq=%llu\n",
- r, jiffies,
+ r, jiffies,
(unsigned long long)seqp->ccid2s_seq);
ccid2_change_srtt(hctx, r);
hctx->ccid2hctx_rttvar = r >> 1;
hctx->ccid2hctx_lastrtt = jiffies;
ccid2_pr_debug("srtt: %ld rttvar: %ld rto: %ld (HZ=%d) R=%lu\n",
- hctx->ccid2hctx_srtt, hctx->ccid2hctx_rttvar,
- hctx->ccid2hctx_rto, HZ, r);
+ hctx->ccid2hctx_srtt, hctx->ccid2hctx_rttvar,
+ hctx->ccid2hctx_rto, HZ, r);
hctx->ccid2hctx_sent = 0;
}
/* new packet received or marked */
if (state != DCCP_ACKVEC_STATE_NOT_RECEIVED &&
!seqp->ccid2s_acked) {
- if (state ==
+ if (state ==
DCCP_ACKVEC_STATE_ECN_MARKED) {
- ccid2_congestion_event(hctx,
+ ccid2_congestion_event(hctx,
seqp);
} else
ccid2_new_ack(sk, seqp,
#include "lib/tfrc.h"
#include "ccid3.h"
-/*
- * Reason for maths here is to avoid 32 bit overflow when a is big.
- * With this we get close to the limit.
- */
-static u32 usecs_div(const u32 a, const u32 b)
-{
- const u32 div = a < (UINT_MAX / (USEC_PER_SEC / 10)) ? 10 :
- a < (UINT_MAX / (USEC_PER_SEC / 50)) ? 50 :
- a < (UINT_MAX / (USEC_PER_SEC / 100)) ? 100 :
- a < (UINT_MAX / (USEC_PER_SEC / 500)) ? 500 :
- a < (UINT_MAX / (USEC_PER_SEC / 1000)) ? 1000 :
- a < (UINT_MAX / (USEC_PER_SEC / 5000)) ? 5000 :
- a < (UINT_MAX / (USEC_PER_SEC / 10000)) ? 10000 :
- a < (UINT_MAX / (USEC_PER_SEC / 50000)) ? 50000 :
- 100000;
- const u32 tmp = a * (USEC_PER_SEC / div);
- return (b >= 2 * div) ? tmp / (b / div) : tmp;
-}
-
-
-
#ifdef CONFIG_IP_DCCP_CCID3_DEBUG
static int ccid3_debug;
#define ccid3_pr_debug(format, a...) DCCP_PR_DEBUG(ccid3_debug, format, ##a)
{
timeval_sub_usecs(&hctx->ccid3hctx_t_nom, hctx->ccid3hctx_t_ipi);
- /* Calculate new t_ipi (inter packet interval) by t_ipi = s / X_inst */
- hctx->ccid3hctx_t_ipi = usecs_div(hctx->ccid3hctx_s, hctx->ccid3hctx_x);
+ /* Calculate new t_ipi = s / X_inst (X_inst is in 64 * bytes/second) */
+ hctx->ccid3hctx_t_ipi = scaled_div(hctx->ccid3hctx_s,
+ hctx->ccid3hctx_x >> 6);
/* Update nominal send time with regard to the new t_ipi */
timeval_add_usecs(&hctx->ccid3hctx_t_nom, hctx->ccid3hctx_t_ipi);
* X = max(min(2 * X, 2 * X_recv), s / R);
* tld = now;
*
+ * Note: X and X_recv are both stored in units of 64 * bytes/second, to support
+ * fine-grained resolution of sending rates. This requires scaling by 2^6
+ * throughout the code. Only X_calc is unscaled (in bytes/second).
+ *
* If X has changed, we also update the scheduled send time t_now,
* the inter-packet interval t_ipi, and the delta value.
- */
+ */
static void ccid3_hc_tx_update_x(struct sock *sk, struct timeval *now)
{
struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
- const __u32 old_x = hctx->ccid3hctx_x;
+ const __u64 old_x = hctx->ccid3hctx_x;
if (hctx->ccid3hctx_p > 0) {
- hctx->ccid3hctx_x_calc = tfrc_calc_x(hctx->ccid3hctx_s,
- hctx->ccid3hctx_rtt,
- hctx->ccid3hctx_p);
- hctx->ccid3hctx_x = max_t(u32, min(hctx->ccid3hctx_x_calc,
- hctx->ccid3hctx_x_recv * 2),
- hctx->ccid3hctx_s / TFRC_T_MBI);
-
- } else if (timeval_delta(now, &hctx->ccid3hctx_t_ld) >=
- hctx->ccid3hctx_rtt) {
- hctx->ccid3hctx_x = max(min(hctx->ccid3hctx_x_recv,
- hctx->ccid3hctx_x ) * 2,
- usecs_div(hctx->ccid3hctx_s,
- hctx->ccid3hctx_rtt) );
+
+ hctx->ccid3hctx_x = min(((__u64)hctx->ccid3hctx_x_calc) << 6,
+ hctx->ccid3hctx_x_recv * 2);
+ hctx->ccid3hctx_x = max(hctx->ccid3hctx_x,
+ (((__u64)hctx->ccid3hctx_s) << 6) /
+ TFRC_T_MBI);
+
+ } else if (timeval_delta(now, &hctx->ccid3hctx_t_ld) -
+ (suseconds_t)hctx->ccid3hctx_rtt >= 0) {
+
+ hctx->ccid3hctx_x =
+ max(2 * min(hctx->ccid3hctx_x, hctx->ccid3hctx_x_recv),
+ scaled_div(((__u64)hctx->ccid3hctx_s) << 6,
+ hctx->ccid3hctx_rtt));
hctx->ccid3hctx_t_ld = *now;
- } else
- ccid3_pr_debug("Not changing X\n");
+ }
if (hctx->ccid3hctx_x != old_x)
ccid3_update_send_time(hctx);
}
/*
- * Track the mean packet size `s' (cf. RFC 4342, 5.3 and RFC 3448, 4.1)
- * @len: DCCP packet payload size in bytes
+ * Track the mean packet size `s' (cf. RFC 4342, 5.3 and RFC 3448, 4.1)
+ * @len: DCCP packet payload size in bytes
*/
static inline void ccid3_hc_tx_update_s(struct ccid3_hc_tx_sock *hctx, int len)
{
*/
}
+/*
+ * Update Window Counter using the algorithm from [RFC 4342, 8.1].
+ * The algorithm is not applicable if RTT < 4 microseconds.
+ */
+static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx,
+ struct timeval *now)
+{
+ suseconds_t delta;
+ u32 quarter_rtts;
+
+ if (unlikely(hctx->ccid3hctx_rtt < 4)) /* avoid divide-by-zero */
+ return;
+
+ delta = timeval_delta(now, &hctx->ccid3hctx_t_last_win_count);
+ DCCP_BUG_ON(delta < 0);
+
+ quarter_rtts = (u32)delta / (hctx->ccid3hctx_rtt / 4);
+
+ if (quarter_rtts > 0) {
+ hctx->ccid3hctx_t_last_win_count = *now;
+ hctx->ccid3hctx_last_win_count += min_t(u32, quarter_rtts, 5);
+ hctx->ccid3hctx_last_win_count &= 0xF; /* mod 16 */
+
+ ccid3_pr_debug("now at %#X\n", hctx->ccid3hctx_last_win_count);
+ }
+}
+
static void ccid3_hc_tx_no_feedback_timer(unsigned long data)
{
struct sock *sk = (struct sock *)data;
goto restart_timer;
}
- ccid3_pr_debug("%s, sk=%p, state=%s\n", dccp_role(sk), sk,
+ ccid3_pr_debug("%s(%p, state=%s) - entry \n", dccp_role(sk), sk,
ccid3_tx_state_name(hctx->ccid3hctx_state));
-
+
switch (hctx->ccid3hctx_state) {
case TFRC_SSTATE_NO_FBACK:
/* RFC 3448, 4.4: Halve send rate directly */
- hctx->ccid3hctx_x = min_t(u32, hctx->ccid3hctx_x / 2,
- hctx->ccid3hctx_s / TFRC_T_MBI);
+ hctx->ccid3hctx_x = max(hctx->ccid3hctx_x / 2,
+ (((__u64)hctx->ccid3hctx_s) << 6) /
+ TFRC_T_MBI);
- ccid3_pr_debug("%s, sk=%p, state=%s, updated tx rate to %d "
- "bytes/s\n",
- dccp_role(sk), sk,
+ ccid3_pr_debug("%s(%p, state=%s), updated tx rate to %u "
+ "bytes/s\n", dccp_role(sk), sk,
ccid3_tx_state_name(hctx->ccid3hctx_state),
- hctx->ccid3hctx_x);
+ (unsigned)(hctx->ccid3hctx_x >> 6));
/* The value of R is still undefined and so we can not recompute
* the timout value. Keep initial value as per [RFC 4342, 5]. */
t_nfb = TFRC_INITIAL_TIMEOUT;
case TFRC_SSTATE_FBACK:
/*
* Check if IDLE since last timeout and recv rate is less than
- * 4 packets per RTT
+ * 4 packets (in units of 64*bytes/sec) per RTT
*/
if (!hctx->ccid3hctx_idle ||
- (hctx->ccid3hctx_x_recv >=
- 4 * usecs_div(hctx->ccid3hctx_s, hctx->ccid3hctx_rtt))) {
+ (hctx->ccid3hctx_x_recv >= 4 *
+ scaled_div(((__u64)hctx->ccid3hctx_s) << 6,
+ hctx->ccid3hctx_rtt))) {
struct timeval now;
- ccid3_pr_debug("%s, sk=%p, state=%s, not idle\n",
+ ccid3_pr_debug("%s(%p, state=%s), not idle\n",
dccp_role(sk), sk,
- ccid3_tx_state_name(hctx->ccid3hctx_state));
- /* Halve sending rate */
+ ccid3_tx_state_name(hctx->ccid3hctx_state));
- /* If (p == 0 || X_calc > 2 * X_recv)
+ /*
+ * Modify the cached value of X_recv [RFC 3448, 4.4]
+ *
+ * If (p == 0 || X_calc > 2 * X_recv)
* X_recv = max(X_recv / 2, s / (2 * t_mbi));
* Else
* X_recv = X_calc / 4;
+ *
+ * Note that X_recv is scaled by 2^6 while X_calc is not
*/
BUG_ON(hctx->ccid3hctx_p && !hctx->ccid3hctx_x_calc);
if (hctx->ccid3hctx_p == 0 ||
- hctx->ccid3hctx_x_calc > 2 * hctx->ccid3hctx_x_recv)
- hctx->ccid3hctx_x_recv = max_t(u32, hctx->ccid3hctx_x_recv / 2,
- hctx->ccid3hctx_s / (2 * TFRC_T_MBI));
- else
- hctx->ccid3hctx_x_recv = hctx->ccid3hctx_x_calc / 4;
-
- /* Update sending rate */
- dccp_timestamp(sk, &now);
+ (hctx->ccid3hctx_x_calc >
+ (hctx->ccid3hctx_x_recv >> 5))) {
+
+ hctx->ccid3hctx_x_recv =
+ max(hctx->ccid3hctx_x_recv / 2,
+ (((__u64)hctx->ccid3hctx_s) << 6) /
+ (2 * TFRC_T_MBI));
+
+ if (hctx->ccid3hctx_p == 0)
+ dccp_timestamp(sk, &now);
+ } else {
+ hctx->ccid3hctx_x_recv = hctx->ccid3hctx_x_calc;
+ hctx->ccid3hctx_x_recv <<= 4;
+ }
+ /* Now recalculate X [RFC 3448, 4.3, step (4)] */
ccid3_hc_tx_update_x(sk, &now);
}
/*
t_nfb = max(hctx->ccid3hctx_t_rto, 2 * hctx->ccid3hctx_t_ipi);
break;
case TFRC_SSTATE_NO_SENT:
- DCCP_BUG("Illegal %s state NO_SENT, sk=%p", dccp_role(sk), sk);
+ DCCP_BUG("%s(%p) - Illegal state NO_SENT", dccp_role(sk), sk);
/* fall through */
case TFRC_SSTATE_TERM:
goto out;
{
struct dccp_sock *dp = dccp_sk(sk);
struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
- struct dccp_tx_hist_entry *new_packet;
struct timeval now;
- long delay;
+ suseconds_t delay;
BUG_ON(hctx == NULL);
if (unlikely(skb->len == 0))
return -EBADMSG;
- /* See if last packet allocated was not sent */
- new_packet = dccp_tx_hist_head(&hctx->ccid3hctx_hist);
- if (new_packet == NULL || new_packet->dccphtx_sent) {
- new_packet = dccp_tx_hist_entry_new(ccid3_tx_hist,
- GFP_ATOMIC);
-
- if (unlikely(new_packet == NULL)) {
- DCCP_WARN("%s, sk=%p, not enough mem to add to history,"
- "send refused\n", dccp_role(sk), sk);
- return -ENOBUFS;
- }
-
- dccp_tx_hist_add_entry(&hctx->ccid3hctx_hist, new_packet);
- }
-
dccp_timestamp(sk, &now);
switch (hctx->ccid3hctx_state) {
case TFRC_SSTATE_NO_SENT:
sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
- jiffies + usecs_to_jiffies(TFRC_INITIAL_TIMEOUT));
+ (jiffies +
+ usecs_to_jiffies(TFRC_INITIAL_TIMEOUT)));
hctx->ccid3hctx_last_win_count = 0;
hctx->ccid3hctx_t_last_win_count = now;
ccid3_hc_tx_set_state(sk, TFRC_SSTATE_NO_FBACK);
- /* Set initial sending rate to 1 packet per second */
+ /* Set initial sending rate X/s to 1pps (X is scaled by 2^6) */
ccid3_hc_tx_update_s(hctx, skb->len);
- hctx->ccid3hctx_x = hctx->ccid3hctx_s;
+ hctx->ccid3hctx_x = hctx->ccid3hctx_s;
+ hctx->ccid3hctx_x <<= 6;
/* First timeout, according to [RFC 3448, 4.2], is 1 second */
hctx->ccid3hctx_t_ipi = USEC_PER_SEC;
case TFRC_SSTATE_FBACK:
delay = timeval_delta(&hctx->ccid3hctx_t_nom, &now);
/*
- * Scheduling of packet transmissions [RFC 3448, 4.6]
+ * Scheduling of packet transmissions [RFC 3448, 4.6]
*
* if (t_now > t_nom - delta)
* // send the packet now
* else
* // send the packet in (t_nom - t_now) milliseconds.
*/
- if (delay - (long)hctx->ccid3hctx_delta >= 0)
+ if (delay - (suseconds_t)hctx->ccid3hctx_delta >= 0)
return delay / 1000L;
+
+ ccid3_hc_tx_update_win_count(hctx, &now);
break;
case TFRC_SSTATE_TERM:
- DCCP_BUG("Illegal %s state TERM, sk=%p", dccp_role(sk), sk);
+ DCCP_BUG("%s(%p) - Illegal state TERM", dccp_role(sk), sk);
return -EINVAL;
}
/* prepare to send now (add options etc.) */
dp->dccps_hc_tx_insert_options = 1;
- new_packet->dccphtx_ccval = DCCP_SKB_CB(skb)->dccpd_ccval =
- hctx->ccid3hctx_last_win_count;
+ DCCP_SKB_CB(skb)->dccpd_ccval = hctx->ccid3hctx_last_win_count;
+
+ /* set the nominal send time for the next following packet */
timeval_add_usecs(&hctx->ccid3hctx_t_nom, hctx->ccid3hctx_t_ipi);
return 0;
}
-static void ccid3_hc_tx_packet_sent(struct sock *sk, int more, unsigned int len)
+static void ccid3_hc_tx_packet_sent(struct sock *sk, int more,
+ unsigned int len)
{
- const struct dccp_sock *dp = dccp_sk(sk);
struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
struct timeval now;
- unsigned long quarter_rtt;
struct dccp_tx_hist_entry *packet;
BUG_ON(hctx == NULL);
- dccp_timestamp(sk, &now);
-
ccid3_hc_tx_update_s(hctx, len);
- packet = dccp_tx_hist_head(&hctx->ccid3hctx_hist);
+ packet = dccp_tx_hist_entry_new(ccid3_tx_hist, GFP_ATOMIC);
if (unlikely(packet == NULL)) {
- DCCP_WARN("packet doesn't exist in history!\n");
- return;
- }
- if (unlikely(packet->dccphtx_sent)) {
- DCCP_WARN("no unsent packet in history!\n");
+ DCCP_CRIT("packet history - out of memory!");
return;
}
- packet->dccphtx_tstamp = now;
- packet->dccphtx_seqno = dp->dccps_gss;
- /*
- * Check if win_count have changed
- * Algorithm in "8.1. Window Counter Value" in RFC 4342.
- */
- quarter_rtt = timeval_delta(&now, &hctx->ccid3hctx_t_last_win_count);
- if (likely(hctx->ccid3hctx_rtt > 8))
- quarter_rtt /= hctx->ccid3hctx_rtt / 4;
-
- if (quarter_rtt > 0) {
- hctx->ccid3hctx_t_last_win_count = now;
- hctx->ccid3hctx_last_win_count = (hctx->ccid3hctx_last_win_count +
- min_t(unsigned long, quarter_rtt, 5)) % 16;
- ccid3_pr_debug("%s, sk=%p, window changed from "
- "%u to %u!\n",
- dccp_role(sk), sk,
- packet->dccphtx_ccval,
- hctx->ccid3hctx_last_win_count);
- }
+ dccp_tx_hist_add_entry(&hctx->ccid3hctx_hist, packet);
- hctx->ccid3hctx_idle = 0;
- packet->dccphtx_rtt = hctx->ccid3hctx_rtt;
- packet->dccphtx_sent = 1;
+ dccp_timestamp(sk, &now);
+ packet->dccphtx_tstamp = now;
+ packet->dccphtx_seqno = dccp_sk(sk)->dccps_gss;
+ packet->dccphtx_rtt = hctx->ccid3hctx_rtt;
+ packet->dccphtx_sent = 1;
+ hctx->ccid3hctx_idle = 0;
}
static void ccid3_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
struct timeval now;
unsigned long t_nfb;
u32 pinv;
- long r_sample, t_elapsed;
+ suseconds_t r_sample, t_elapsed;
BUG_ON(hctx == NULL);
case TFRC_SSTATE_FBACK:
/* get packet from history to look up t_recvdata */
packet = dccp_tx_hist_find_entry(&hctx->ccid3hctx_hist,
- DCCP_SKB_CB(skb)->dccpd_ack_seq);
+ DCCP_SKB_CB(skb)->dccpd_ack_seq);
if (unlikely(packet == NULL)) {
DCCP_WARN("%s(%p), seqno %llu(%s) doesn't exist "
"in history!\n", dccp_role(sk), sk,
(unsigned long long)DCCP_SKB_CB(skb)->dccpd_ack_seq,
- dccp_packet_name(DCCP_SKB_CB(skb)->dccpd_type));
+ dccp_packet_name(DCCP_SKB_CB(skb)->dccpd_type));
return;
}
- /* Update receive rate */
+ /* Update receive rate in units of 64 * bytes/second */
hctx->ccid3hctx_x_recv = opt_recv->ccid3or_receive_rate;
+ hctx->ccid3hctx_x_recv <<= 6;
/* Update loss event rate */
pinv = opt_recv->ccid3or_loss_event_rate;
- if (pinv == ~0U || pinv == 0)
+ if (pinv == ~0U || pinv == 0) /* see RFC 4342, 8.5 */
hctx->ccid3hctx_p = 0;
- else
- hctx->ccid3hctx_p = 1000000 / pinv;
+ else /* can not exceed 100% */
+ hctx->ccid3hctx_p = 1000000 / pinv;
dccp_timestamp(sk, &now);
/*
* Calculate new round trip sample as per [RFC 3448, 4.3] by
- * R_sample = (now - t_recvdata) - t_elapsed
+ * R_sample = (now - t_recvdata) - t_elapsed
*/
r_sample = timeval_delta(&now, &packet->dccphtx_tstamp);
t_elapsed = dp->dccps_options_received.dccpor_elapsed_time * 10;
- if (unlikely(r_sample <= 0)) {
- DCCP_WARN("WARNING: R_sample (%ld) <= 0!\n", r_sample);
- r_sample = 0;
- } else if (unlikely(r_sample <= t_elapsed))
- DCCP_WARN("WARNING: r_sample=%ldus <= t_elapsed=%ldus\n",
- r_sample, t_elapsed);
+ DCCP_BUG_ON(r_sample < 0);
+ if (unlikely(r_sample <= t_elapsed))
+ DCCP_WARN("WARNING: r_sample=%dus <= t_elapsed=%dus\n",
+ (int)r_sample, (int)t_elapsed);
else
r_sample -= t_elapsed;
+ CCID3_RTT_SANITY_CHECK(r_sample);
- /* Update RTT estimate by
+ /* Update RTT estimate by
* If (No feedback recv)
* R = R_sample;
* Else
* q is a constant, RFC 3448 recomments 0.9
*/
if (hctx->ccid3hctx_state == TFRC_SSTATE_NO_FBACK) {
- /* Use Larger Initial Windows [RFC 4342, sec. 5]
- * We deviate in that we use `s' instead of `MSS'. */
- u16 w_init = max( 4 * hctx->ccid3hctx_s,
- max(2 * hctx->ccid3hctx_s, 4380));
+ /*
+ * Larger Initial Windows [RFC 4342, sec. 5]
+ * We deviate in that we use `s' instead of `MSS'.
+ */
+ __u64 w_init = min(4 * hctx->ccid3hctx_s,
+ max(2 * hctx->ccid3hctx_s, 4380));
hctx->ccid3hctx_rtt = r_sample;
- hctx->ccid3hctx_x = usecs_div(w_init, r_sample);
+ hctx->ccid3hctx_x = scaled_div(w_init << 6, r_sample);
hctx->ccid3hctx_t_ld = now;
ccid3_update_send_time(hctx);
- ccid3_pr_debug("%s(%p), s=%u, w_init=%u, "
- "R_sample=%ldus, X=%u\n", dccp_role(sk),
- sk, hctx->ccid3hctx_s, w_init, r_sample,
- hctx->ccid3hctx_x);
+ ccid3_pr_debug("%s(%p), s=%u, w_init=%llu, "
+ "R_sample=%dus, X=%u\n", dccp_role(sk),
+ sk, hctx->ccid3hctx_s, w_init,
+ (int)r_sample,
+ (unsigned)(hctx->ccid3hctx_x >> 6));
ccid3_hc_tx_set_state(sk, TFRC_SSTATE_FBACK);
} else {
hctx->ccid3hctx_rtt = (9 * hctx->ccid3hctx_rtt +
- (u32)r_sample ) / 10;
-
+ (u32)r_sample) / 10;
+
+ /* Update sending rate (step 4 of [RFC 3448, 4.3]) */
+ if (hctx->ccid3hctx_p > 0)
+ hctx->ccid3hctx_x_calc =
+ tfrc_calc_x(hctx->ccid3hctx_s,
+ hctx->ccid3hctx_rtt,
+ hctx->ccid3hctx_p);
ccid3_hc_tx_update_x(sk, &now);
- ccid3_pr_debug("%s(%p), RTT=%uus (sample=%ldus), s=%u, "
- "p=%u, X_calc=%u, X=%u\n", dccp_role(sk),
- sk, hctx->ccid3hctx_rtt, r_sample,
+ ccid3_pr_debug("%s(%p), RTT=%uus (sample=%dus), s=%u, "
+ "p=%u, X_calc=%u, X_recv=%u, X=%u\n",
+ dccp_role(sk),
+ sk, hctx->ccid3hctx_rtt, (int)r_sample,
hctx->ccid3hctx_s, hctx->ccid3hctx_p,
hctx->ccid3hctx_x_calc,
- hctx->ccid3hctx_x);
+ (unsigned)(hctx->ccid3hctx_x_recv >> 6),
+ (unsigned)(hctx->ccid3hctx_x >> 6));
}
/* unschedule no feedback timer */
dccp_tx_hist_purge_older(ccid3_tx_hist,
&hctx->ccid3hctx_hist, packet);
/*
- * As we have calculated new ipi, delta, t_nom it is possible that
- * we now can send a packet, so wake up dccp_wait_for_ccid
+ * As we have calculated new ipi, delta, t_nom it is possible
+ * that we now can send a packet, so wake up dccp_wait_for_ccid
*/
sk->sk_write_space(sk);
/*
* Update timeout interval for the nofeedback timer.
* We use a configuration option to increase the lower bound.
- * This can help avoid triggering the nofeedback timer too often
- * ('spinning') on LANs with small RTTs.
+ * This can help avoid triggering the nofeedback timer too
+ * often ('spinning') on LANs with small RTTs.
*/
hctx->ccid3hctx_t_rto = max_t(u32, 4 * hctx->ccid3hctx_rtt,
CONFIG_IP_DCCP_CCID3_RTO *
- (USEC_PER_SEC/1000) );
+ (USEC_PER_SEC/1000));
/*
* Schedule no feedback timer to expire in
* max(t_RTO, 2 * s/X) = max(t_RTO, 2 * t_ipi)
*/
t_nfb = max(hctx->ccid3hctx_t_rto, 2 * hctx->ccid3hctx_t_ipi);
-
- ccid3_pr_debug("%s, sk=%p, Scheduled no feedback timer to "
+
+ ccid3_pr_debug("%s(%p), Scheduled no feedback timer to "
"expire in %lu jiffies (%luus)\n",
- dccp_role(sk), sk,
- usecs_to_jiffies(t_nfb), t_nfb);
+ dccp_role(sk),
+ sk, usecs_to_jiffies(t_nfb), t_nfb);
- sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
+ sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
jiffies + usecs_to_jiffies(t_nfb));
/* set idle flag */
- hctx->ccid3hctx_idle = 1;
+ hctx->ccid3hctx_idle = 1;
break;
case TFRC_SSTATE_NO_SENT:
- if (dccp_sk(sk)->dccps_role == DCCP_ROLE_CLIENT)
- DCCP_WARN("Illegal ACK received - no packet sent\n");
+ /*
+ * XXX when implementing bidirectional rx/tx check this again
+ */
+ DCCP_WARN("Illegal ACK received - no packet sent\n");
/* fall through */
case TFRC_SSTATE_TERM: /* ignore feedback when closing */
break;
}
}
-static int ccid3_hc_tx_insert_options(struct sock *sk, struct sk_buff *skb)
-{
- const struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
-
- BUG_ON(hctx == NULL);
-
- if (sk->sk_state == DCCP_OPEN || sk->sk_state == DCCP_PARTOPEN)
- DCCP_SKB_CB(skb)->dccpd_ccval = hctx->ccid3hctx_last_win_count;
- return 0;
-}
-
static int ccid3_hc_tx_parse_options(struct sock *sk, unsigned char option,
unsigned char len, u16 idx,
unsigned char *value)
switch (option) {
case TFRC_OPT_LOSS_EVENT_RATE:
if (unlikely(len != 4)) {
- DCCP_WARN("%s, sk=%p, invalid len %d "
+ DCCP_WARN("%s(%p), invalid len %d "
"for TFRC_OPT_LOSS_EVENT_RATE\n",
dccp_role(sk), sk, len);
rc = -EINVAL;
} else {
- opt_recv->ccid3or_loss_event_rate = ntohl(*(__be32 *)value);
- ccid3_pr_debug("%s, sk=%p, LOSS_EVENT_RATE=%u\n",
+ opt_recv->ccid3or_loss_event_rate =
+ ntohl(*(__be32 *)value);
+ ccid3_pr_debug("%s(%p), LOSS_EVENT_RATE=%u\n",
dccp_role(sk), sk,
opt_recv->ccid3or_loss_event_rate);
}
case TFRC_OPT_LOSS_INTERVALS:
opt_recv->ccid3or_loss_intervals_idx = idx;
opt_recv->ccid3or_loss_intervals_len = len;
- ccid3_pr_debug("%s, sk=%p, LOSS_INTERVALS=(%u, %u)\n",
+ ccid3_pr_debug("%s(%p), LOSS_INTERVALS=(%u, %u)\n",
dccp_role(sk), sk,
opt_recv->ccid3or_loss_intervals_idx,
opt_recv->ccid3or_loss_intervals_len);
break;
case TFRC_OPT_RECEIVE_RATE:
if (unlikely(len != 4)) {
- DCCP_WARN("%s, sk=%p, invalid len %d "
+ DCCP_WARN("%s(%p), invalid len %d "
"for TFRC_OPT_RECEIVE_RATE\n",
dccp_role(sk), sk, len);
rc = -EINVAL;
} else {
- opt_recv->ccid3or_receive_rate = ntohl(*(__be32 *)value);
- ccid3_pr_debug("%s, sk=%p, RECEIVE_RATE=%u\n",
+ opt_recv->ccid3or_receive_rate =
+ ntohl(*(__be32 *)value);
+ ccid3_pr_debug("%s(%p), RECEIVE_RATE=%u\n",
dccp_role(sk), sk,
opt_recv->ccid3or_receive_rate);
}
struct ccid3_hc_tx_sock *hctx = ccid_priv(ccid);
hctx->ccid3hctx_s = 0;
+ hctx->ccid3hctx_rtt = 0;
hctx->ccid3hctx_state = TFRC_SSTATE_NO_SENT;
INIT_LIST_HEAD(&hctx->ccid3hctx_hist);
- hctx->ccid3hctx_no_feedback_timer.function = ccid3_hc_tx_no_feedback_timer;
+ hctx->ccid3hctx_no_feedback_timer.function =
+ ccid3_hc_tx_no_feedback_timer;
hctx->ccid3hctx_no_feedback_timer.data = (unsigned long)sk;
init_timer(&hctx->ccid3hctx_no_feedback_timer);
struct dccp_sock *dp = dccp_sk(sk);
struct dccp_rx_hist_entry *packet;
struct timeval now;
+ suseconds_t delta;
- ccid3_pr_debug("%s, sk=%p\n", dccp_role(sk), sk);
+ ccid3_pr_debug("%s(%p) - entry \n", dccp_role(sk), sk);
dccp_timestamp(sk, &now);
case TFRC_RSTATE_NO_DATA:
hcrx->ccid3hcrx_x_recv = 0;
break;
- case TFRC_RSTATE_DATA: {
- const u32 delta = timeval_delta(&now,
- &hcrx->ccid3hcrx_tstamp_last_feedback);
- hcrx->ccid3hcrx_x_recv = usecs_div(hcrx->ccid3hcrx_bytes_recv,
- delta);
- }
+ case TFRC_RSTATE_DATA:
+ delta = timeval_delta(&now,
+ &hcrx->ccid3hcrx_tstamp_last_feedback);
+ DCCP_BUG_ON(delta < 0);
+ hcrx->ccid3hcrx_x_recv =
+ scaled_div32(hcrx->ccid3hcrx_bytes_recv, delta);
break;
case TFRC_RSTATE_TERM:
- DCCP_BUG("Illegal %s state TERM, sk=%p", dccp_role(sk), sk);
+ DCCP_BUG("%s(%p) - Illegal state TERM", dccp_role(sk), sk);
return;
}
packet = dccp_rx_hist_find_data_packet(&hcrx->ccid3hcrx_hist);
if (unlikely(packet == NULL)) {
- DCCP_WARN("%s, sk=%p, no data packet in history!\n",
+ DCCP_WARN("%s(%p), no data packet in history!\n",
dccp_role(sk), sk);
return;
}
hcrx->ccid3hcrx_ccval_last_counter = packet->dccphrx_ccval;
hcrx->ccid3hcrx_bytes_recv = 0;
- /* Convert to multiples of 10us */
- hcrx->ccid3hcrx_elapsed_time =
- timeval_delta(&now, &packet->dccphrx_tstamp) / 10;
+ /* Elapsed time information [RFC 4340, 13.2] in units of 10 * usecs */
+ delta = timeval_delta(&now, &packet->dccphrx_tstamp);
+ DCCP_BUG_ON(delta < 0);
+ hcrx->ccid3hcrx_elapsed_time = delta / 10;
+
if (hcrx->ccid3hcrx_p == 0)
- hcrx->ccid3hcrx_pinv = ~0;
- else
+ hcrx->ccid3hcrx_pinv = ~0U; /* see RFC 4342, 8.5 */
+ else if (hcrx->ccid3hcrx_p > 1000000) {
+ DCCP_WARN("p (%u) > 100%%\n", hcrx->ccid3hcrx_p);
+ hcrx->ccid3hcrx_pinv = 1; /* use 100% in this case */
+ } else
hcrx->ccid3hcrx_pinv = 1000000 / hcrx->ccid3hcrx_p;
+
dp->dccps_hc_rx_insert_options = 1;
dccp_send_ack(sk);
}
hcrx->ccid3hcrx_elapsed_time)) ||
dccp_insert_option_timestamp(sk, skb) ||
dccp_insert_option(sk, skb, TFRC_OPT_LOSS_EVENT_RATE,
- &pinv, sizeof(pinv)) ||
+ &pinv, sizeof(pinv)) ||
dccp_insert_option(sk, skb, TFRC_OPT_RECEIVE_RATE,
- &x_recv, sizeof(x_recv)))
+ &x_recv, sizeof(x_recv)))
return -1;
return 0;
{
struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
struct dccp_rx_hist_entry *entry, *next, *tail = NULL;
- u32 rtt, delta, x_recv, fval, p, tmp2;
+ u32 x_recv, p;
+ suseconds_t rtt, delta;
struct timeval tstamp = { 0, };
int interval = 0;
int win_count = 0;
int step = 0;
- u64 tmp1;
+ u64 fval;
list_for_each_entry_safe(entry, next, &hcrx->ccid3hcrx_hist,
dccphrx_node) {
}
if (unlikely(step == 0)) {
- DCCP_WARN("%s, sk=%p, packet history has no data packets!\n",
+ DCCP_WARN("%s(%p), packet history has no data packets!\n",
dccp_role(sk), sk);
return ~0;
}
if (unlikely(interval == 0)) {
- DCCP_WARN("%s, sk=%p, Could not find a win_count interval > 0."
+ DCCP_WARN("%s(%p), Could not find a win_count interval > 0."
"Defaulting to 1\n", dccp_role(sk), sk);
interval = 1;
}
DCCP_CRIT("tail is null\n");
return ~0;
}
- rtt = timeval_delta(&tstamp, &tail->dccphrx_tstamp) * 4 / interval;
- ccid3_pr_debug("%s, sk=%p, approximated RTT to %uus\n",
- dccp_role(sk), sk, rtt);
- if (rtt == 0) {
- DCCP_WARN("RTT==0, setting to 1\n");
- rtt = 1;
+ delta = timeval_delta(&tstamp, &tail->dccphrx_tstamp);
+ DCCP_BUG_ON(delta < 0);
+
+ rtt = delta * 4 / interval;
+ ccid3_pr_debug("%s(%p), approximated RTT to %dus\n",
+ dccp_role(sk), sk, (int)rtt);
+
+ /*
+ * Determine the length of the first loss interval via inverse lookup.
+ * Assume that X_recv can be computed by the throughput equation
+ * s
+ * X_recv = --------
+ * R * fval
+ * Find some p such that f(p) = fval; return 1/p [RFC 3448, 6.3.1].
+ */
+ if (rtt == 0) { /* would result in divide-by-zero */
+ DCCP_WARN("RTT==0\n");
+ return ~0;
}
dccp_timestamp(sk, &tstamp);
delta = timeval_delta(&tstamp, &hcrx->ccid3hcrx_tstamp_last_feedback);
- x_recv = usecs_div(hcrx->ccid3hcrx_bytes_recv, delta);
-
- if (x_recv == 0)
- x_recv = hcrx->ccid3hcrx_x_recv;
-
- tmp1 = (u64)x_recv * (u64)rtt;
- do_div(tmp1,10000000);
- tmp2 = (u32)tmp1;
-
- if (!tmp2) {
- DCCP_CRIT("tmp2 = 0, x_recv = %u, rtt =%u\n", x_recv, rtt);
- return ~0;
+ DCCP_BUG_ON(delta <= 0);
+
+ x_recv = scaled_div32(hcrx->ccid3hcrx_bytes_recv, delta);
+ if (x_recv == 0) { /* would also trigger divide-by-zero */
+ DCCP_WARN("X_recv==0\n");
+ if ((x_recv = hcrx->ccid3hcrx_x_recv) == 0) {
+ DCCP_BUG("stored value of X_recv is zero");
+ return ~0;
+ }
}
- fval = (hcrx->ccid3hcrx_s * 100000) / tmp2;
- /* do not alter order above or you will get overflow on 32 bit */
+ fval = scaled_div(hcrx->ccid3hcrx_s, rtt);
+ fval = scaled_div32(fval, x_recv);
p = tfrc_calc_x_reverse_lookup(fval);
- ccid3_pr_debug("%s, sk=%p, receive rate=%u bytes/s, implied "
+
+ ccid3_pr_debug("%s(%p), receive rate=%u bytes/s, implied "
"loss rate=%u\n", dccp_role(sk), sk, x_recv, p);
if (p == 0)
return ~0;
else
- return 1000000 / p;
+ return 1000000 / p;
}
static void ccid3_hc_rx_update_li(struct sock *sk, u64 seq_loss, u8 win_loss)
struct dccp_rx_hist_entry *packet)
{
struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
- struct dccp_rx_hist_entry *rx_hist = dccp_rx_hist_head(&hcrx->ccid3hcrx_hist);
+ struct dccp_rx_hist_entry *rx_hist =
+ dccp_rx_hist_head(&hcrx->ccid3hcrx_hist);
u64 seqno = packet->dccphrx_seqno;
u64 tmp_seqno;
int loss = 0;
dccp_inc_seqno(&tmp_seqno);
while (dccp_rx_hist_find_entry(&hcrx->ccid3hcrx_hist,
tmp_seqno, &ccval)) {
- hcrx->ccid3hcrx_seqno_nonloss = tmp_seqno;
+ hcrx->ccid3hcrx_seqno_nonloss = tmp_seqno;
hcrx->ccid3hcrx_ccval_nonloss = ccval;
dccp_inc_seqno(&tmp_seqno);
}
const struct dccp_options_received *opt_recv;
struct dccp_rx_hist_entry *packet;
struct timeval now;
- u32 p_prev, rtt_prev, r_sample, t_elapsed;
+ u32 p_prev, rtt_prev;
+ suseconds_t r_sample, t_elapsed;
int loss, payload_size;
BUG_ON(hcrx == NULL);
r_sample = timeval_usecs(&now);
t_elapsed = opt_recv->dccpor_elapsed_time * 10;
+ DCCP_BUG_ON(r_sample < 0);
if (unlikely(r_sample <= t_elapsed))
- DCCP_WARN("r_sample=%uus, t_elapsed=%uus\n",
+ DCCP_WARN("r_sample=%ldus, t_elapsed=%ldus\n",
r_sample, t_elapsed);
else
r_sample -= t_elapsed;
+ CCID3_RTT_SANITY_CHECK(r_sample);
if (hcrx->ccid3hcrx_state == TFRC_RSTATE_NO_DATA)
hcrx->ccid3hcrx_rtt = r_sample;
r_sample / 10;
if (rtt_prev != hcrx->ccid3hcrx_rtt)
- ccid3_pr_debug("%s, New RTT=%uus, elapsed time=%u\n",
- dccp_role(sk), hcrx->ccid3hcrx_rtt,
+ ccid3_pr_debug("%s(%p), New RTT=%uus, elapsed time=%u\n",
+ dccp_role(sk), sk, hcrx->ccid3hcrx_rtt,
opt_recv->dccpor_elapsed_time);
break;
case DCCP_PKT_DATA:
packet = dccp_rx_hist_entry_new(ccid3_rx_hist, sk, opt_recv->dccpor_ndp,
skb, GFP_ATOMIC);
if (unlikely(packet == NULL)) {
- DCCP_WARN("%s, sk=%p, Not enough mem to add rx packet "
+ DCCP_WARN("%s(%p), Not enough mem to add rx packet "
"to history, consider it lost!\n", dccp_role(sk), sk);
return;
}
switch (hcrx->ccid3hcrx_state) {
case TFRC_RSTATE_NO_DATA:
- ccid3_pr_debug("%s, sk=%p(%s), skb=%p, sending initial "
- "feedback\n",
- dccp_role(sk), sk,
+ ccid3_pr_debug("%s(%p, state=%s), skb=%p, sending initial "
+ "feedback\n", dccp_role(sk), sk,
dccp_state_name(sk->sk_state), skb);
ccid3_hc_rx_send_feedback(sk);
ccid3_hc_rx_set_state(sk, TFRC_RSTATE_DATA);
break;
dccp_timestamp(sk, &now);
- if (timeval_delta(&now, &hcrx->ccid3hcrx_tstamp_last_ack) >=
- hcrx->ccid3hcrx_rtt) {
+ if ((timeval_delta(&now, &hcrx->ccid3hcrx_tstamp_last_ack) -
+ (suseconds_t)hcrx->ccid3hcrx_rtt) >= 0) {
hcrx->ccid3hcrx_tstamp_last_ack = now;
ccid3_hc_rx_send_feedback(sk);
}
return;
case TFRC_RSTATE_TERM:
- DCCP_BUG("Illegal %s state TERM, sk=%p", dccp_role(sk), sk);
+ DCCP_BUG("%s(%p) - Illegal state TERM", dccp_role(sk), sk);
return;
}
/* Dealing with packet loss */
- ccid3_pr_debug("%s, sk=%p(%s), data loss! Reacting...\n",
+ ccid3_pr_debug("%s(%p, state=%s), data loss! Reacting...\n",
dccp_role(sk), sk, dccp_state_name(sk->sk_state));
p_prev = hcrx->ccid3hcrx_p;
{
struct ccid3_hc_rx_sock *hcrx = ccid_priv(ccid);
- ccid3_pr_debug("%s, sk=%p\n", dccp_role(sk), sk);
+ ccid3_pr_debug("entry\n");
hcrx->ccid3hcrx_state = TFRC_RSTATE_NO_DATA;
INIT_LIST_HEAD(&hcrx->ccid3hcrx_hist);
dccp_timestamp(sk, &hcrx->ccid3hcrx_tstamp_last_ack);
hcrx->ccid3hcrx_tstamp_last_feedback = hcrx->ccid3hcrx_tstamp_last_ack;
hcrx->ccid3hcrx_s = 0;
- hcrx->ccid3hcrx_rtt = 5000; /* XXX 5ms for now... */
+ hcrx->ccid3hcrx_rtt = 0;
return 0;
}
BUG_ON(hcrx == NULL);
- info->tcpi_ca_state = hcrx->ccid3hcrx_state;
- info->tcpi_options |= TCPI_OPT_TIMESTAMPS;
- info->tcpi_rcv_rtt = hcrx->ccid3hcrx_rtt;
+ info->tcpi_ca_state = hcrx->ccid3hcrx_state;
+ info->tcpi_options |= TCPI_OPT_TIMESTAMPS;
+ info->tcpi_rcv_rtt = hcrx->ccid3hcrx_rtt;
}
static void ccid3_hc_tx_get_info(struct sock *sk, struct tcp_info *info)
.ccid_hc_tx_send_packet = ccid3_hc_tx_send_packet,
.ccid_hc_tx_packet_sent = ccid3_hc_tx_packet_sent,
.ccid_hc_tx_packet_recv = ccid3_hc_tx_packet_recv,
- .ccid_hc_tx_insert_options = ccid3_hc_tx_insert_options,
.ccid_hc_tx_parse_options = ccid3_hc_tx_parse_options,
.ccid_hc_rx_obj_size = sizeof(struct ccid3_hc_rx_sock),
.ccid_hc_rx_init = ccid3_hc_rx_init,
.ccid_hc_rx_getsockopt = ccid3_hc_rx_getsockopt,
.ccid_hc_tx_getsockopt = ccid3_hc_tx_getsockopt,
};
-
+
#ifdef CONFIG_IP_DCCP_CCID3_DEBUG
module_param(ccid3_debug, int, 0444);
MODULE_PARM_DESC(ccid3_debug, "Enable debug messages");
goto out_free_tx;
rc = ccid_register(&ccid3);
- if (rc != 0)
+ if (rc != 0)
goto out_free_loss_interval_history;
out:
return rc;
/* Parameter t_mbi from [RFC 3448, 4.3]: backoff interval in seconds */
#define TFRC_T_MBI 64
+/* What we think is a reasonable upper limit on RTT values */
+#define CCID3_SANE_RTT_MAX ((suseconds_t)(4 * USEC_PER_SEC))
+
+#define CCID3_RTT_SANITY_CHECK(rtt) do { \
+ if (rtt > CCID3_SANE_RTT_MAX) { \
+ DCCP_CRIT("RTT (%d) too large, substituting %d", \
+ (int)rtt, (int)CCID3_SANE_RTT_MAX); \
+ rtt = CCID3_SANE_RTT_MAX; \
+ } } while (0)
+
enum ccid3_options {
TFRC_OPT_LOSS_EVENT_RATE = 192,
TFRC_OPT_LOSS_INTERVALS = 193,
/* TFRC sender states */
enum ccid3_hc_tx_states {
- TFRC_SSTATE_NO_SENT = 1,
+ TFRC_SSTATE_NO_SENT = 1,
TFRC_SSTATE_NO_FBACK,
TFRC_SSTATE_FBACK,
TFRC_SSTATE_TERM,
/** struct ccid3_hc_tx_sock - CCID3 sender half-connection socket
*
- * @ccid3hctx_x - Current sending rate
- * @ccid3hctx_x_recv - Receive rate
- * @ccid3hctx_x_calc - Calculated send rate (RFC 3448, 3.1)
+ * @ccid3hctx_x - Current sending rate in 64 * bytes per second
+ * @ccid3hctx_x_recv - Receive rate in 64 * bytes per second
+ * @ccid3hctx_x_calc - Calculated rate in bytes per second
* @ccid3hctx_rtt - Estimate of current round trip time in usecs
* @ccid3hctx_p - Current loss event rate (0-1) scaled by 1000000
- * @ccid3hctx_s - Packet size
- * @ccid3hctx_t_rto - Retransmission Timeout (RFC 3448, 3.1)
- * @ccid3hctx_t_ipi - Interpacket (send) interval (RFC 3448, 4.6)
+ * @ccid3hctx_s - Packet size in bytes
+ * @ccid3hctx_t_rto - Nofeedback Timer setting in usecs
+ * @ccid3hctx_t_ipi - Interpacket (send) interval (RFC 3448, 4.6) in usecs
* @ccid3hctx_state - Sender state, one of %ccid3_hc_tx_states
* @ccid3hctx_last_win_count - Last window counter sent
* @ccid3hctx_t_last_win_count - Timestamp of earliest packet
- * with last_win_count value sent
+ * with last_win_count value sent
* @ccid3hctx_no_feedback_timer - Handle to no feedback timer
* @ccid3hctx_idle - Flag indicating that sender is idling
* @ccid3hctx_t_ld - Time last doubled during slow start
* @ccid3hctx_t_nom - Nominal send time of next packet
- * @ccid3hctx_delta - Send timer delta
+ * @ccid3hctx_delta - Send timer delta (RFC 3448, 4.6) in usecs
* @ccid3hctx_hist - Packet history
* @ccid3hctx_options_received - Parsed set of retrieved options
*/
#define ccid3hctx_t_rto ccid3hctx_tfrc.tfrctx_rto
#define ccid3hctx_t_ipi ccid3hctx_tfrc.tfrctx_ipi
u16 ccid3hctx_s;
- enum ccid3_hc_tx_states ccid3hctx_state:8;
+ enum ccid3_hc_tx_states ccid3hctx_state:8;
u8 ccid3hctx_last_win_count;
u8 ccid3hctx_idle;
struct timeval ccid3hctx_t_last_win_count;
/* TFRC receiver states */
enum ccid3_hc_rx_states {
- TFRC_RSTATE_NO_DATA = 1,
+ TFRC_RSTATE_NO_DATA = 1,
TFRC_RSTATE_DATA,
TFRC_RSTATE_TERM = 127,
};
#define ccid3hcrx_x_recv ccid3hcrx_tfrc.tfrcrx_x_recv
#define ccid3hcrx_rtt ccid3hcrx_tfrc.tfrcrx_rtt
#define ccid3hcrx_p ccid3hcrx_tfrc.tfrcrx_p
- u64 ccid3hcrx_seqno_nonloss:48,
+ u64 ccid3hcrx_seqno_nonloss:48,
ccid3hcrx_ccval_nonloss:4,
ccid3hcrx_ccval_last_counter:4;
enum ccid3_hc_rx_states ccid3hcrx_state:8;
- u32 ccid3hcrx_bytes_recv;
- struct timeval ccid3hcrx_tstamp_last_feedback;
- struct timeval ccid3hcrx_tstamp_last_ack;
+ u32 ccid3hcrx_bytes_recv;
+ struct timeval ccid3hcrx_tstamp_last_feedback;
+ struct timeval ccid3hcrx_tstamp_last_ack;
struct list_head ccid3hcrx_hist;
struct list_head ccid3hcrx_li_hist;
- u16 ccid3hcrx_s;
- u32 ccid3hcrx_pinv;
- u32 ccid3hcrx_elapsed_time;
+ u16 ccid3hcrx_s;
+ u32 ccid3hcrx_pinv;
+ u32 ccid3hcrx_elapsed_time;
};
static inline struct ccid3_hc_tx_sock *ccid3_hc_tx_sk(const struct sock *sk)
#include <linux/module.h>
#include <linux/string.h>
-
#include "packet_history.h"
+/*
+ * Transmitter History Routines
+ */
+struct dccp_tx_hist *dccp_tx_hist_new(const char *name)
+{
+ struct dccp_tx_hist *hist = kmalloc(sizeof(*hist), GFP_ATOMIC);
+ static const char dccp_tx_hist_mask[] = "tx_hist_%s";
+ char *slab_name;
+
+ if (hist == NULL)
+ goto out;
+
+ slab_name = kmalloc(strlen(name) + sizeof(dccp_tx_hist_mask) - 1,
+ GFP_ATOMIC);
+ if (slab_name == NULL)
+ goto out_free_hist;
+
+ sprintf(slab_name, dccp_tx_hist_mask, name);
+ hist->dccptxh_slab = kmem_cache_create(slab_name,
+ sizeof(struct dccp_tx_hist_entry),
+ 0, SLAB_HWCACHE_ALIGN,
+ NULL, NULL);
+ if (hist->dccptxh_slab == NULL)
+ goto out_free_slab_name;
+out:
+ return hist;
+out_free_slab_name:
+ kfree(slab_name);
+out_free_hist:
+ kfree(hist);
+ hist = NULL;
+ goto out;
+}
+
+EXPORT_SYMBOL_GPL(dccp_tx_hist_new);
+
+void dccp_tx_hist_delete(struct dccp_tx_hist *hist)
+{
+ const char* name = kmem_cache_name(hist->dccptxh_slab);
+
+ kmem_cache_destroy(hist->dccptxh_slab);
+ kfree(name);
+ kfree(hist);
+}
+
+EXPORT_SYMBOL_GPL(dccp_tx_hist_delete);
+
+struct dccp_tx_hist_entry *
+ dccp_tx_hist_find_entry(const struct list_head *list, const u64 seq)
+{
+ struct dccp_tx_hist_entry *packet = NULL, *entry;
+
+ list_for_each_entry(entry, list, dccphtx_node)
+ if (entry->dccphtx_seqno == seq) {
+ packet = entry;
+ break;
+ }
+
+ return packet;
+}
+
+EXPORT_SYMBOL_GPL(dccp_tx_hist_find_entry);
+
+void dccp_tx_hist_purge(struct dccp_tx_hist *hist, struct list_head *list)
+{
+ struct dccp_tx_hist_entry *entry, *next;
+
+ list_for_each_entry_safe(entry, next, list, dccphtx_node) {
+ list_del_init(&entry->dccphtx_node);
+ dccp_tx_hist_entry_delete(hist, entry);
+ }
+}
+
+EXPORT_SYMBOL_GPL(dccp_tx_hist_purge);
+
+void dccp_tx_hist_purge_older(struct dccp_tx_hist *hist,
+ struct list_head *list,
+ struct dccp_tx_hist_entry *packet)
+{
+ struct dccp_tx_hist_entry *next;
+
+ list_for_each_entry_safe_continue(packet, next, list, dccphtx_node) {
+ list_del_init(&packet->dccphtx_node);
+ dccp_tx_hist_entry_delete(hist, packet);
+ }
+}
+
+EXPORT_SYMBOL_GPL(dccp_tx_hist_purge_older);
+
+/*
+ * Receiver History Routines
+ */
struct dccp_rx_hist *dccp_rx_hist_new(const char *name)
{
struct dccp_rx_hist *hist = kmalloc(sizeof(*hist), GFP_ATOMIC);
EXPORT_SYMBOL_GPL(dccp_rx_hist_delete);
-void dccp_rx_hist_purge(struct dccp_rx_hist *hist, struct list_head *list)
+int dccp_rx_hist_find_entry(const struct list_head *list, const u64 seq,
+ u8 *ccval)
{
- struct dccp_rx_hist_entry *entry, *next;
+ struct dccp_rx_hist_entry *packet = NULL, *entry;
- list_for_each_entry_safe(entry, next, list, dccphrx_node) {
- list_del_init(&entry->dccphrx_node);
- kmem_cache_free(hist->dccprxh_slab, entry);
- }
-}
+ list_for_each_entry(entry, list, dccphrx_node)
+ if (entry->dccphrx_seqno == seq) {
+ packet = entry;
+ break;
+ }
-EXPORT_SYMBOL_GPL(dccp_rx_hist_purge);
+ if (packet)
+ *ccval = packet->dccphrx_ccval;
+ return packet != NULL;
+}
+
+EXPORT_SYMBOL_GPL(dccp_rx_hist_find_entry);
struct dccp_rx_hist_entry *
dccp_rx_hist_find_data_packet(const struct list_head *list)
{
EXPORT_SYMBOL_GPL(dccp_rx_hist_add_packet);
-struct dccp_tx_hist *dccp_tx_hist_new(const char *name)
-{
- struct dccp_tx_hist *hist = kmalloc(sizeof(*hist), GFP_ATOMIC);
- static const char dccp_tx_hist_mask[] = "tx_hist_%s";
- char *slab_name;
-
- if (hist == NULL)
- goto out;
-
- slab_name = kmalloc(strlen(name) + sizeof(dccp_tx_hist_mask) - 1,
- GFP_ATOMIC);
- if (slab_name == NULL)
- goto out_free_hist;
-
- sprintf(slab_name, dccp_tx_hist_mask, name);
- hist->dccptxh_slab = kmem_cache_create(slab_name,
- sizeof(struct dccp_tx_hist_entry),
- 0, SLAB_HWCACHE_ALIGN,
- NULL, NULL);
- if (hist->dccptxh_slab == NULL)
- goto out_free_slab_name;
-out:
- return hist;
-out_free_slab_name:
- kfree(slab_name);
-out_free_hist:
- kfree(hist);
- hist = NULL;
- goto out;
-}
-
-EXPORT_SYMBOL_GPL(dccp_tx_hist_new);
-
-void dccp_tx_hist_delete(struct dccp_tx_hist *hist)
-{
- const char* name = kmem_cache_name(hist->dccptxh_slab);
-
- kmem_cache_destroy(hist->dccptxh_slab);
- kfree(name);
- kfree(hist);
-}
-
-EXPORT_SYMBOL_GPL(dccp_tx_hist_delete);
-
-struct dccp_tx_hist_entry *
- dccp_tx_hist_find_entry(const struct list_head *list, const u64 seq)
-{
- struct dccp_tx_hist_entry *packet = NULL, *entry;
-
- list_for_each_entry(entry, list, dccphtx_node)
- if (entry->dccphtx_seqno == seq) {
- packet = entry;
- break;
- }
-
- return packet;
-}
-
-EXPORT_SYMBOL_GPL(dccp_tx_hist_find_entry);
-
-int dccp_rx_hist_find_entry(const struct list_head *list, const u64 seq,
- u8 *ccval)
-{
- struct dccp_rx_hist_entry *packet = NULL, *entry;
-
- list_for_each_entry(entry, list, dccphrx_node)
- if (entry->dccphrx_seqno == seq) {
- packet = entry;
- break;
- }
-
- if (packet)
- *ccval = packet->dccphrx_ccval;
-
- return packet != NULL;
-}
-
-EXPORT_SYMBOL_GPL(dccp_rx_hist_find_entry);
-
-void dccp_tx_hist_purge_older(struct dccp_tx_hist *hist,
- struct list_head *list,
- struct dccp_tx_hist_entry *packet)
+void dccp_rx_hist_purge(struct dccp_rx_hist *hist, struct list_head *list)
{
- struct dccp_tx_hist_entry *next;
+ struct dccp_rx_hist_entry *entry, *next;
- list_for_each_entry_safe_continue(packet, next, list, dccphtx_node) {
- list_del_init(&packet->dccphtx_node);
- dccp_tx_hist_entry_delete(hist, packet);
+ list_for_each_entry_safe(entry, next, list, dccphrx_node) {
+ list_del_init(&entry->dccphrx_node);
+ kmem_cache_free(hist->dccprxh_slab, entry);
}
}
-EXPORT_SYMBOL_GPL(dccp_tx_hist_purge_older);
-
-void dccp_tx_hist_purge(struct dccp_tx_hist *hist, struct list_head *list)
-{
- struct dccp_tx_hist_entry *entry, *next;
-
- list_for_each_entry_safe(entry, next, list, dccphtx_node) {
- list_del_init(&entry->dccphtx_node);
- dccp_tx_hist_entry_delete(hist, entry);
- }
-}
+EXPORT_SYMBOL_GPL(dccp_rx_hist_purge);
-EXPORT_SYMBOL_GPL(dccp_tx_hist_purge);
MODULE_AUTHOR("Ian McDonald <ian.mcdonald@jandi.co.nz>, "
"Arnaldo Carvalho de Melo <acme@ghostprotocols.net>");
#define TFRC_WIN_COUNT_PER_RTT 4
#define TFRC_WIN_COUNT_LIMIT 16
+/*
+ * Transmitter History data structures and declarations
+ */
struct dccp_tx_hist_entry {
struct list_head dccphtx_node;
u64 dccphtx_seqno:48,
- dccphtx_ccval:4,
dccphtx_sent:1;
u32 dccphtx_rtt;
struct timeval dccphtx_tstamp;
};
-struct dccp_rx_hist_entry {
- struct list_head dccphrx_node;
- u64 dccphrx_seqno:48,
- dccphrx_ccval:4,
- dccphrx_type:4;
- u32 dccphrx_ndp; /* In fact it is from 8 to 24 bits */
- struct timeval dccphrx_tstamp;
-};
-
struct dccp_tx_hist {
struct kmem_cache *dccptxh_slab;
};
extern struct dccp_tx_hist *dccp_tx_hist_new(const char *name);
-extern void dccp_tx_hist_delete(struct dccp_tx_hist *hist);
-
-struct dccp_rx_hist {
- struct kmem_cache *dccprxh_slab;
-};
-
-extern struct dccp_rx_hist *dccp_rx_hist_new(const char *name);
-extern void dccp_rx_hist_delete(struct dccp_rx_hist *hist);
-extern struct dccp_rx_hist_entry *
- dccp_rx_hist_find_data_packet(const struct list_head *list);
+extern void dccp_tx_hist_delete(struct dccp_tx_hist *hist);
static inline struct dccp_tx_hist_entry *
- dccp_tx_hist_entry_new(struct dccp_tx_hist *hist,
- const gfp_t prio)
+ dccp_tx_hist_entry_new(struct dccp_tx_hist *hist,
+ const gfp_t prio)
{
struct dccp_tx_hist_entry *entry = kmem_cache_alloc(hist->dccptxh_slab,
prio);
return entry;
}
-static inline void dccp_tx_hist_entry_delete(struct dccp_tx_hist *hist,
- struct dccp_tx_hist_entry *entry)
+static inline struct dccp_tx_hist_entry *
+ dccp_tx_hist_head(struct list_head *list)
{
- if (entry != NULL)
- kmem_cache_free(hist->dccptxh_slab, entry);
+ struct dccp_tx_hist_entry *head = NULL;
+
+ if (!list_empty(list))
+ head = list_entry(list->next, struct dccp_tx_hist_entry,
+ dccphtx_node);
+ return head;
}
extern struct dccp_tx_hist_entry *
dccp_tx_hist_find_entry(const struct list_head *list,
const u64 seq);
-extern int dccp_rx_hist_find_entry(const struct list_head *list, const u64 seq,
- u8 *ccval);
static inline void dccp_tx_hist_add_entry(struct list_head *list,
struct dccp_tx_hist_entry *entry)
list_add(&entry->dccphtx_node, list);
}
+static inline void dccp_tx_hist_entry_delete(struct dccp_tx_hist *hist,
+ struct dccp_tx_hist_entry *entry)
+{
+ if (entry != NULL)
+ kmem_cache_free(hist->dccptxh_slab, entry);
+}
+
+extern void dccp_tx_hist_purge(struct dccp_tx_hist *hist,
+ struct list_head *list);
+
extern void dccp_tx_hist_purge_older(struct dccp_tx_hist *hist,
struct list_head *list,
struct dccp_tx_hist_entry *next);
-extern void dccp_tx_hist_purge(struct dccp_tx_hist *hist,
- struct list_head *list);
+/*
+ * Receiver History data structures and declarations
+ */
+struct dccp_rx_hist_entry {
+ struct list_head dccphrx_node;
+ u64 dccphrx_seqno:48,
+ dccphrx_ccval:4,
+ dccphrx_type:4;
+ u32 dccphrx_ndp; /* In fact it is from 8 to 24 bits */
+ struct timeval dccphrx_tstamp;
+};
-static inline struct dccp_tx_hist_entry *
- dccp_tx_hist_head(struct list_head *list)
-{
- struct dccp_tx_hist_entry *head = NULL;
+struct dccp_rx_hist {
+ struct kmem_cache *dccprxh_slab;
+};
- if (!list_empty(list))
- head = list_entry(list->next, struct dccp_tx_hist_entry,
- dccphtx_node);
- return head;
-}
+extern struct dccp_rx_hist *dccp_rx_hist_new(const char *name);
+extern void dccp_rx_hist_delete(struct dccp_rx_hist *hist);
static inline struct dccp_rx_hist_entry *
- dccp_rx_hist_entry_new(struct dccp_rx_hist *hist,
- const struct sock *sk,
- const u32 ndp,
- const struct sk_buff *skb,
- const gfp_t prio)
+ dccp_rx_hist_entry_new(struct dccp_rx_hist *hist,
+ const struct sock *sk,
+ const u32 ndp,
+ const struct sk_buff *skb,
+ const gfp_t prio)
{
struct dccp_rx_hist_entry *entry = kmem_cache_alloc(hist->dccprxh_slab,
prio);
return entry;
}
-static inline void dccp_rx_hist_entry_delete(struct dccp_rx_hist *hist,
- struct dccp_rx_hist_entry *entry)
-{
- if (entry != NULL)
- kmem_cache_free(hist->dccprxh_slab, entry);
-}
-
-extern void dccp_rx_hist_purge(struct dccp_rx_hist *hist,
- struct list_head *list);
-
static inline struct dccp_rx_hist_entry *
- dccp_rx_hist_head(struct list_head *list)
+ dccp_rx_hist_head(struct list_head *list)
{
struct dccp_rx_hist_entry *head = NULL;
return head;
}
+extern int dccp_rx_hist_find_entry(const struct list_head *list, const u64 seq,
+ u8 *ccval);
+extern struct dccp_rx_hist_entry *
+ dccp_rx_hist_find_data_packet(const struct list_head *list);
+
+extern void dccp_rx_hist_add_packet(struct dccp_rx_hist *hist,
+ struct list_head *rx_list,
+ struct list_head *li_list,
+ struct dccp_rx_hist_entry *packet,
+ u64 nonloss_seqno);
+
+static inline void dccp_rx_hist_entry_delete(struct dccp_rx_hist *hist,
+ struct dccp_rx_hist_entry *entry)
+{
+ if (entry != NULL)
+ kmem_cache_free(hist->dccprxh_slab, entry);
+}
+
+extern void dccp_rx_hist_purge(struct dccp_rx_hist *hist,
+ struct list_head *list);
+
static inline int
dccp_rx_hist_entry_data_packet(const struct dccp_rx_hist_entry *entry)
{
entry->dccphrx_type == DCCP_PKT_DATAACK;
}
-extern void dccp_rx_hist_add_packet(struct dccp_rx_hist *hist,
- struct list_head *rx_list,
- struct list_head *li_list,
- struct dccp_rx_hist_entry *packet,
- u64 nonloss_seqno);
-
extern u64 dccp_rx_hist_detect_loss(struct list_head *rx_list,
struct list_head *li_list, u8 *win_loss);
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
#include <linux/types.h>
+#include <asm/div64.h>
+
+/* integer-arithmetic divisions of type (a * 1000000)/b */
+static inline u64 scaled_div(u64 a, u32 b)
+{
+ BUG_ON(b==0);
+ a *= 1000000;
+ do_div(a, b);
+ return a;
+}
+
+static inline u32 scaled_div32(u64 a, u32 b)
+{
+ u64 result = scaled_div(a, b);
+
+ if (result > UINT_MAX) {
+ DCCP_CRIT("Overflow: a(%llu)/b(%u) > ~0U",
+ (unsigned long long)a, b);
+ return UINT_MAX;
+ }
+ return result;
+}
extern u32 tfrc_calc_x(u16 s, u32 R, u32 p);
extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue);
*/
#include <linux/module.h>
-#include <asm/div64.h>
#include "../../dccp.h"
#include "tfrc.h"
* @R: RTT scaled by 1000000 (i.e., microseconds)
* @p: loss ratio estimate scaled by 1000000
* Returns X_calc in bytes per second (not scaled).
- *
- * Note: DO NOT alter this code unless you run test cases against it,
- * as the code has been optimized to stop underflow/overflow.
*/
u32 tfrc_calc_x(u16 s, u32 R, u32 p)
{
- int index;
+ u16 index;
u32 f;
- u64 tmp1, tmp2;
+ u64 result;
/* check against invalid parameters and divide-by-zero */
BUG_ON(p > 1000000); /* p must not exceed 100% */
f = tfrc_calc_x_lookup[index][0];
}
- /* The following computes X = s/(R*f(p)) in bytes per second. Since f(p)
- * and R are both scaled by 1000000, we need to multiply by 1000000^2.
- * ==> DO NOT alter this unless you test against overflow on 32 bit */
- tmp1 = ((u64)s * 100000000);
- tmp2 = ((u64)R * (u64)f);
- do_div(tmp2, 10000);
- do_div(tmp1, tmp2);
-
- return (u32)tmp1;
+ /*
+ * Compute X = s/(R*f(p)) in bytes per second.
+ * Since f(p) and R are both scaled by 1000000, we need to multiply by
+ * 1000000^2. To avoid overflow, the result is computed in two stages.
+ * This works under almost all reasonable operational conditions, for a
+ * wide range of parameters. Yet, should some strange combination of
+ * parameters result in overflow, the use of scaled_div32 will catch
+ * this and return UINT_MAX - which is a logically adequate consequence.
+ */
+ result = scaled_div(s, R);
+ return scaled_div32(result, f);
}
EXPORT_SYMBOL_GPL(tfrc_calc_x);
#define DCCP_RTO_MAX ((unsigned)(120 * HZ)) /* FIXME: using TCP value */
-#define DCCP_XMIT_TIMEO 30000 /* Time/msecs for blocking transmit per packet */
-
/* sysctl variables for DCCP */
extern int sysctl_dccp_request_retries;
extern int sysctl_dccp_retries1;
tv->tv_sec--;
tv->tv_usec += USEC_PER_SEC;
}
+ DCCP_BUG_ON(tv->tv_sec < 0);
}
#ifdef CONFIG_SYSCTL
switch (type) {
case DCCPO_CHANGE_L: opt->dccpop_type = DCCPO_CONFIRM_R; break;
case DCCPO_CHANGE_R: opt->dccpop_type = DCCPO_CONFIRM_L; break;
- default: DCCP_WARN("invalid type %d\n", type); return;
+ default: DCCP_WARN("invalid type %d\n", type); return;
}
opt->dccpop_feat = feature;
switch (type) {
case DCCPO_CONFIRM_L: t = DCCPO_CHANGE_R; break;
case DCCPO_CONFIRM_R: t = DCCPO_CHANGE_L; break;
- default: DCCP_WARN("invalid type %d\n", type);
+ default: DCCP_WARN("invalid type %d\n", type);
return 1;
}
case DCCPO_CHANGE_R: return("ChangeR");
case DCCPO_CONFIRM_R: return("ConfirmR");
/* the following case must not appear in feature negotation */
- default: dccp_pr_debug("unknown type %d [BUG!]\n", type);
+ default: dccp_pr_debug("unknown type %d [BUG!]\n", type);
}
return NULL;
}
/*
* net/dccp/input.c
- *
+ *
* An implementation of the DCCP protocol
* Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*
* Otherwise,
* Drop packet and return
*/
- if (dh->dccph_type == DCCP_PKT_SYNC ||
+ if (dh->dccph_type == DCCP_PKT_SYNC ||
dh->dccph_type == DCCP_PKT_SYNCACK) {
if (between48(DCCP_SKB_CB(skb)->dccpd_ack_seq,
dp->dccps_awl, dp->dccps_awh) &&
dccp_rcv_close(sk, skb);
return 0;
case DCCP_PKT_REQUEST:
- /* Step 7
- * or (S.is_server and P.type == Response)
+ /* Step 7
+ * or (S.is_server and P.type == Response)
* or (S.is_client and P.type == Request)
* or (S.state >= OPEN and P.type == Request
* and P.seqno >= S.OSR)
DCCP_ACKVEC_STATE_RECEIVED))
goto discard;
- ccid_hc_rx_packet_recv(dp->dccps_hc_rx_ccid, sk, skb);
- ccid_hc_tx_packet_recv(dp->dccps_hc_tx_ccid, sk, skb);
+ /*
+ * Deliver to the CCID module in charge.
+ * FIXME: Currently DCCP operates one-directional only, i.e. a listening
+ * server is not at the same time a connecting client. There is
+ * not much sense in delivering to both rx/tx sides at the moment
+ * (only one is active at a time); when moving to bidirectional
+ * service, this needs to be revised.
+ */
+ if (dccp_sk(sk)->dccps_role == DCCP_ROLE_SERVER)
+ ccid_hc_rx_packet_recv(dp->dccps_hc_rx_ccid, sk, skb);
+ else
+ ccid_hc_tx_packet_recv(dp->dccps_hc_tx_ccid, sk, skb);
return __dccp_rcv_established(sk, skb, dh, len);
discard:
const struct dccp_hdr *dh,
const unsigned len)
{
- /*
+ /*
* Step 4: Prepare sequence numbers in REQUEST
* If S.state == REQUEST,
* If (P.type == Response or P.type == Reset)
* from the Response * /
* S.state := PARTOPEN
* Set PARTOPEN timer
- * Continue with S.state == PARTOPEN
+ * Continue with S.state == PARTOPEN
* / * Step 12 will send the Ack completing the
* three-way handshake * /
*/
*/
__kfree_skb(skb);
return 0;
- }
+ }
dccp_send_ack(sk);
return -1;
}
out_invalid_packet:
/* dccp_v4_do_rcv will send a reset */
DCCP_SKB_CB(skb)->dccpd_reset_code = DCCP_RESET_CODE_PACKET_ERROR;
- return 1;
+ return 1;
}
static int dccp_rcv_respond_partopen_state_process(struct sock *sk,
if (dcb->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ)
dccp_event_ack_recv(sk, skb);
- if (dccp_msk(sk)->dccpms_send_ack_vector &&
+ if (dccp_msk(sk)->dccpms_send_ack_vector &&
dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk,
- DCCP_SKB_CB(skb)->dccpd_seq,
- DCCP_ACKVEC_STATE_RECEIVED))
- goto discard;
+ DCCP_SKB_CB(skb)->dccpd_seq,
+ DCCP_ACKVEC_STATE_RECEIVED))
+ goto discard;
- ccid_hc_rx_packet_recv(dp->dccps_hc_rx_ccid, sk, skb);
- ccid_hc_tx_packet_recv(dp->dccps_hc_tx_ccid, sk, skb);
+ /* XXX see the comments in dccp_rcv_established about this */
+ if (dccp_sk(sk)->dccps_role == DCCP_ROLE_SERVER)
+ ccid_hc_rx_packet_recv(dp->dccps_hc_rx_ccid, sk, skb);
+ else
+ ccid_hc_tx_packet_recv(dp->dccps_hc_tx_ccid, sk, skb);
}
/*
}
}
- if (!queued) {
+ if (!queued) {
discard:
__kfree_skb(skb);
}
/* We don't check in the destentry if pmtu discovery is forbidden
* on this route. We just assume that no packet_to_big packets
* are send back when pmtu discovery is not active.
- * There is a small race when the user changes this flag in the
+ * There is a small race when the user changes this flag in the
* route, but I think that's acceptable.
*/
if ((dst = __sk_dst_check(sk, 0)) == NULL)
.uli_u = { .ports =
{ .sport = dccp_hdr(skb)->dccph_dport,
.dport = dccp_hdr(skb)->dccph_sport }
- }
+ }
};
security_skb_classify_flow(skb, &fl);
struct inet_request_sock *ireq;
struct request_sock *req;
struct dccp_request_sock *dreq;
- const __be32 service = dccp_hdr_request(skb)->dccph_req_service;
+ const __be32 service = dccp_hdr_request(skb)->dccph_req_service;
struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
__u8 reset_code = DCCP_RESET_CODE_TOO_BUSY;
if (dccp_bad_service_code(sk, service)) {
reset_code = DCCP_RESET_CODE_BAD_SERVICE_CODE;
goto drop;
- }
+ }
/*
* TW buckets are converted to open requests without
* limitations, they conserve resources and peer is
ireq->rmt_addr = skb->nh.iph->saddr;
ireq->opt = NULL;
- /*
+ /*
* Step 3: Process LISTEN state
*
* Set S.ISR, S.GSR, S.SWL, S.SWH from packet or Init Cookie
}
/* Step 2:
- * Look up flow ID in table and get corresponding socket */
+ * Look up flow ID in table and get corresponding socket */
sk = __inet_lookup(&dccp_hashinfo,
skb->nh.iph->saddr, dh->dccph_sport,
skb->nh.iph->daddr, dh->dccph_dport,
inet_iif(skb));
- /*
+ /*
* Step 2:
- * If no socket ...
+ * If no socket ...
*/
if (sk == NULL) {
dccp_pr_debug("failed to look up flow ID in table and "
goto no_dccp_socket;
}
- /*
+ /*
* Step 2:
- * ... or S.state == TIMEWAIT,
+ * ... or S.state == TIMEWAIT,
* Generate Reset(No Connection) unless P.type == Reset
* Drop packet and return
*/
/*
* RFC 4340, sec. 9.2.1: Minimum Checksum Coverage
- * o if MinCsCov = 0, only packets with CsCov = 0 are accepted
- * o if MinCsCov > 0, also accept packets with CsCov >= MinCsCov
+ * o if MinCsCov = 0, only packets with CsCov = 0 are accepted
+ * o if MinCsCov > 0, also accept packets with CsCov >= MinCsCov
*/
min_cov = dccp_sk(sk)->dccps_pcrlen;
if (dh->dccph_cscov && (min_cov == 0 || dh->dccph_cscov < min_cov)) {
goto discard_it;
/*
* Step 2:
- * If no socket ...
+ * If no socket ...
* Generate Reset(No Connection) unless P.type == Reset
* Drop packet and return
*/
}
static inline __u32 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
- __be16 sport, __be16 dport )
+ __be16 sport, __be16 dport )
{
return secure_tcpv6_sequence_number(saddr, daddr, sport, dport);
}
skb = alloc_skb(dccp_v6_ctl_socket->sk->sk_prot->max_header,
GFP_ATOMIC);
if (skb == NULL)
- return;
+ return;
skb_reserve(skb, dccp_v6_ctl_socket->sk->sk_prot->max_header);
dccp_csum_outgoing(skb);
dh->dccph_checksum = dccp_v6_csum_finish(skb, &rxskb->nh.ipv6h->saddr,
- &rxskb->nh.ipv6h->daddr);
+ &rxskb->nh.ipv6h->daddr);
memset(&fl, 0, sizeof(fl));
ipv6_addr_copy(&fl.fl6_dst, &rxskb->nh.ipv6h->saddr);
struct dccp_request_sock *dreq;
struct inet6_request_sock *ireq6;
struct ipv6_pinfo *np = inet6_sk(sk);
- const __be32 service = dccp_hdr_request(skb)->dccph_req_service;
+ const __be32 service = dccp_hdr_request(skb)->dccph_req_service;
struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
__u8 reset_code = DCCP_RESET_CODE_TOO_BUSY;
if (dccp_bad_service_code(sk, service)) {
reset_code = DCCP_RESET_CODE_BAD_SERVICE_CODE;
goto drop;
- }
+ }
/*
* There are no SYN attacks on IPv6, yet...
*/
* otherwise we just shortcircuit this and continue with
* the new socket..
*/
- if (nsk != sk) {
+ if (nsk != sk) {
if (dccp_child_process(sk, nsk, skb))
goto reset;
if (opt_skb != NULL)
DCCP_SKB_CB(skb)->dccpd_ack_seq = dccp_hdr_ack_seq(skb);
/* Step 2:
- * Look up flow ID in table and get corresponding socket */
+ * Look up flow ID in table and get corresponding socket */
sk = __inet6_lookup(&dccp_hashinfo, &skb->nh.ipv6h->saddr,
dh->dccph_sport,
&skb->nh.ipv6h->daddr, ntohs(dh->dccph_dport),
inet6_iif(skb));
/*
* Step 2:
- * If no socket ...
+ * If no socket ...
*/
if (sk == NULL) {
dccp_pr_debug("failed to look up flow ID in table and "
/*
* Step 2:
- * ... or S.state == TIMEWAIT,
+ * ... or S.state == TIMEWAIT,
* Generate Reset(No Connection) unless P.type == Reset
* Drop packet and return
*/
/*
* RFC 4340, sec. 9.2.1: Minimum Checksum Coverage
- * o if MinCsCov = 0, only packets with CsCov = 0 are accepted
- * o if MinCsCov > 0, also accept packets with CsCov >= MinCsCov
+ * o if MinCsCov = 0, only packets with CsCov = 0 are accepted
+ * o if MinCsCov > 0, also accept packets with CsCov >= MinCsCov
*/
min_cov = dccp_sk(sk)->dccps_pcrlen;
if (dh->dccph_cscov && (min_cov == 0 || dh->dccph_cscov < min_cov)) {
goto discard_it;
/*
* Step 2:
- * If no socket ...
+ * If no socket ...
* Generate Reset(No Connection) unless P.type == Reset
* Drop packet and return
*/
EXPORT_SYMBOL_GPL(dccp_create_openreq_child);
-/*
+/*
* Process an incoming packet for RESPOND sockets represented
* as an request_sock.
*/
return -1;
dp->dccps_hc_rx_insert_options = 0;
}
- if (dp->dccps_hc_tx_insert_options) {
- if (ccid_hc_tx_insert_options(dp->dccps_hc_tx_ccid, sk, skb))
- return -1;
- dp->dccps_hc_tx_insert_options = 0;
- }
/* Feature negotiation */
/* Data packets can't do feat negotiation */
/*
* net/dccp/output.c
- *
+ *
* An implementation of the DCCP protocol
* Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*
/**
* dccp_wait_for_ccid - Wait for ccid to tell us we can send a packet
* @sk: socket to wait for
- * @timeo: for how long
*/
-static int dccp_wait_for_ccid(struct sock *sk, struct sk_buff *skb,
- long *timeo)
+static int dccp_wait_for_ccid(struct sock *sk, struct sk_buff *skb)
{
struct dccp_sock *dp = dccp_sk(sk);
DEFINE_WAIT(wait);
- long delay;
+ unsigned long delay;
int rc;
while (1) {
if (sk->sk_err)
goto do_error;
- if (!*timeo)
- goto do_nonblock;
if (signal_pending(current))
goto do_interrupted;
if (rc <= 0)
break;
delay = msecs_to_jiffies(rc);
- if (delay > *timeo || delay < 0)
- goto do_nonblock;
-
sk->sk_write_pending++;
release_sock(sk);
- *timeo -= schedule_timeout(delay);
+ schedule_timeout(delay);
lock_sock(sk);
sk->sk_write_pending--;
}
do_error:
rc = -EPIPE;
goto out;
-do_nonblock:
- rc = -EAGAIN;
- goto out;
do_interrupted:
- rc = sock_intr_errno(*timeo);
+ rc = -EINTR;
goto out;
}
{
struct dccp_sock *dp = dccp_sk(sk);
struct sk_buff *skb;
- long timeo = DCCP_XMIT_TIMEO; /* If a packet is taking longer than
- this we have other issues */
while ((skb = skb_peek(&sk->sk_write_queue))) {
int err = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb);
sk_reset_timer(sk, &dp->dccps_xmit_timer,
msecs_to_jiffies(err)+jiffies);
break;
- } else {
- err = dccp_wait_for_ccid(sk, skb, &timeo);
- timeo = DCCP_XMIT_TIMEO;
- }
- if (err)
+ } else
+ err = dccp_wait_for_ccid(sk, skb);
+ if (err && err != -EINTR)
DCCP_BUG("err=%d after dccp_wait_for_ccid", err);
}
if (err)
DCCP_BUG("err=%d after ccid_hc_tx_packet_sent",
err);
- } else
+ } else {
+ dccp_pr_debug("packet discarded\n");
kfree(skb);
+ }
}
}
static struct sk_buff *dccp_make_reset(struct sock *sk, struct dst_entry *dst,
const enum dccp_reset_codes code)
-
{
struct dccp_hdr *dh;
struct dccp_sock *dp = dccp_sk(sk);
dccp_sync_mss(sk, dst_mtu(dst));
- /*
+ /*
* SWL and AWL are initially adjusted so that they are not less than
* the initial Sequence Numbers received and sent, respectively:
* SWL := max(GSR + 1 - floor(W/4), ISR),
* AWL := max(GSS - W' + 1, ISS).
* These adjustments MUST be applied only at the beginning of the
* connection.
- */
+ */
dccp_update_gss(sk, dp->dccps_iss);
dccp_set_seqno(&dp->dccps_awl, max48(dp->dccps_awl, dp->dccps_iss));
sk, GFP_KERNEL);
dp->dccps_hc_tx_ccid = ccid_hc_tx_new(dmsk->dccpms_tx_ccid,
sk, GFP_KERNEL);
- if (unlikely(dp->dccps_hc_rx_ccid == NULL ||
+ if (unlikely(dp->dccps_hc_rx_ccid == NULL ||
dp->dccps_hc_tx_ccid == NULL)) {
ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk);
ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk);
struct dccp_sock *dp = dccp_sk(sk);
struct dccp_service_list *sl = NULL;
- if (service == DCCP_SERVICE_INVALID_VALUE ||
+ if (service == DCCP_SERVICE_INVALID_VALUE ||
optlen > DCCP_SERVICE_LIST_MAX_LEN * sizeof(u32))
return -EINVAL;
static const unsigned char dccp_new_state[] = {
/* current state: new state: action: */
[0] = DCCP_CLOSED,
- [DCCP_OPEN] = DCCP_CLOSING | DCCP_ACTION_FIN,
+ [DCCP_OPEN] = DCCP_CLOSING | DCCP_ACTION_FIN,
[DCCP_REQUESTING] = DCCP_CLOSED,
[DCCP_PARTOPEN] = DCCP_CLOSING | DCCP_ACTION_FIN,
[DCCP_LISTEN] = DCCP_CLOSED,
/*
* net/dccp/timer.c
- *
+ *
* An implementation of the DCCP protocol
* Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*
* sk->sk_send_head has to have one skb with
* DCCP_SKB_CB(skb)->dccpd_type set to one of the retransmittable DCCP
* packet types. The only packets eligible for retransmission are:
- * -- Requests in client-REQUEST state (sec. 8.1.1)
- * -- Acks in client-PARTOPEN state (sec. 8.1.5)
- * -- CloseReq in server-CLOSEREQ state (sec. 8.3)
- * -- Close in node-CLOSING state (sec. 8.3) */
+ * -- Requests in client-REQUEST state (sec. 8.1.1)
+ * -- Acks in client-PARTOPEN state (sec. 8.1.5)
+ * -- CloseReq in server-CLOSEREQ state (sec. 8.3)
+ * -- Close in node-CLOSING state (sec. 8.3) */
BUG_TRAP(sk->sk_send_head != NULL);
- /*
+ /*
* More than than 4MSL (8 minutes) has passed, a RESET(aborted) was
* sent, no need to retransmit, this sock is dead.
*/
/* Only process if socket is not in use. */
bh_lock_sock(sk);
if (sock_owned_by_user(sk)) {
- /* Try again later. */
+ /* Try again later. */
inet_csk_reset_keepalive_timer(sk, HZ / 20);
goto out;
}
void __user *, size_t *, loff_t *);
static int dn_forwarding_sysctl(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context);
+ void __user *newval, size_t newlen);
static struct dn_dev_sysctl_table {
struct ctl_table_header *sysctl_header;
static int dn_forwarding_sysctl(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval, size_t newlen)
{
#ifdef CONFIG_DECNET_ROUTER
struct net_device *dev = table->extra1;
static int dn_node_address_strategy(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval, size_t newlen)
{
size_t len;
__le16 addr;
static int dn_def_dev_strategy(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval, size_t newlen)
{
size_t len;
struct net_device *dev;
spin_lock_irqsave(&mac->lock, flags);
mac->associnfo.associating = 1;
- schedule_work(&mac->associnfo.work);
+ schedule_delayed_work(&mac->associnfo.work, 0);
spin_unlock_irqrestore(&mac->lock, flags);
}
int ipv4_doint_and_flush_strategy(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval, size_t newlen)
{
int *valp = table->data;
int new;
} else {
struct sk_buff *free_it = next;
- /* Old fragmnet is completely overridden with
+ /* Old fragment is completely overridden with
* new one drop it.
*/
next = next->next;
static inline int ip_finish_output2(struct sk_buff *skb)
{
struct dst_entry *dst = skb->dst;
- struct hh_cache *hh = dst->hh;
struct net_device *dev = dst->dev;
int hh_len = LL_RESERVED_SPACE(dev);
skb = skb2;
}
- if (hh) {
- int hh_alen;
-
- read_lock_bh(&hh->hh_lock);
- hh_alen = HH_DATA_ALIGN(hh->hh_len);
- memcpy(skb->data - hh_alen, hh->hh_data, hh_alen);
- read_unlock_bh(&hh->hh_lock);
- skb_push(skb, hh->hh_len);
- return hh->hh_output(skb);
- } else if (dst->neighbour)
+ if (dst->hh)
+ return neigh_hh_output(dst->hh, skb);
+ else if (dst->neighbour)
return dst->neighbour->output(skb);
if (net_ratelimit())
if (stop_master_sync)
break;
- ssleep(1);
+ msleep_interruptible(1000);
}
/* clean up the sync_buff queue */
if (stop_backup_sync)
break;
- ssleep(1);
+ msleep_interruptible(1000);
}
/* release the sending multicast socket */
if ((pid = kernel_thread(sync_thread, startup, 0)) < 0) {
IP_VS_ERR("could not create sync_thread due to %d... "
"retrying.\n", pid);
- ssleep(1);
+ msleep_interruptible(1000);
goto repeat;
}
ip_vs_sync_state |= state;
if (state == IP_VS_STATE_MASTER) {
- strlcpy(ip_vs_master_mcast_ifn, mcast_ifn, sizeof(ip_vs_master_mcast_ifn));
+ strlcpy(ip_vs_master_mcast_ifn, mcast_ifn,
+ sizeof(ip_vs_master_mcast_ifn));
ip_vs_master_syncid = syncid;
} else {
- strlcpy(ip_vs_backup_mcast_ifn, mcast_ifn, sizeof(ip_vs_backup_mcast_ifn));
+ strlcpy(ip_vs_backup_mcast_ifn, mcast_ifn,
+ sizeof(ip_vs_backup_mcast_ifn));
ip_vs_backup_syncid = syncid;
}
if ((pid = kernel_thread(fork_sync_thread, &startup, 0)) < 0) {
IP_VS_ERR("could not create fork_sync_thread due to %d... "
"retrying.\n", pid);
- ssleep(1);
+ msleep_interruptible(1000);
goto repeat;
}
IP_VS_DBG(7, "%s: pid %d\n", __FUNCTION__, current->pid);
IP_VS_INFO("stopping sync thread %d ...\n",
- (state == IP_VS_STATE_MASTER) ? sync_master_pid : sync_backup_pid);
+ (state == IP_VS_STATE_MASTER) ?
+ sync_master_pid : sync_backup_pid);
__set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&stop_sync_wait, &wait);
# NAT + specific targets: nf_conntrack
config NF_NAT
tristate "Full NAT"
- depends on IP_NF_IPTABLES && NF_CONNTRACK
+ depends on IP_NF_IPTABLES && NF_CONNTRACK_IPV4
help
The Full NAT option allows masquerading, port forwarding and other
forms of full Network Address Port Translation. It is controlled by
for (;;) {
struct arpt_standard_target *t
= (void *)arpt_get_target(e);
+ int visited = e->comefrom & (1 << hook);
if (e->comefrom & (1 << NF_ARP_NUMHOOKS)) {
printk("arptables: loop hook %u pos %u %08X.\n",
|= ((1 << hook) | (1 << NF_ARP_NUMHOOKS));
/* Unconditional return/END. */
- if (e->target_offset == sizeof(struct arpt_entry)
+ if ((e->target_offset == sizeof(struct arpt_entry)
&& (strcmp(t->target.u.user.name,
ARPT_STANDARD_TARGET) == 0)
&& t->verdict < 0
- && unconditional(&e->arp)) {
+ && unconditional(&e->arp)) || visited) {
unsigned int oldpos, size;
if (t->verdict < -NF_MAX_VERDICT - 1) {
for (;;) {
struct ipt_standard_target *t
= (void *)ipt_get_target(e);
+ int visited = e->comefrom & (1 << hook);
if (e->comefrom & (1 << NF_IP_NUMHOOKS)) {
printk("iptables: loop hook %u pos %u %08X.\n",
|= ((1 << hook) | (1 << NF_IP_NUMHOOKS));
/* Unconditional return/END. */
- if (e->target_offset == sizeof(struct ipt_entry)
+ if ((e->target_offset == sizeof(struct ipt_entry)
&& (strcmp(t->target.u.user.name,
IPT_STANDARD_TARGET) == 0)
&& t->verdict < 0
- && unconditional(&e->ip)) {
+ && unconditional(&e->ip)) || visited) {
unsigned int oldpos, size;
if (t->verdict < -NF_MAX_VERDICT - 1) {
}
static inline int
-check_match(struct ipt_entry_match *m,
+check_entry(struct ipt_entry *e, const char *name)
+{
+ struct ipt_entry_target *t;
+
+ if (!ip_checkentry(&e->ip)) {
+ duprintf("ip_tables: ip check failed %p %s.\n", e, name);
+ return -EINVAL;
+ }
+
+ if (e->target_offset + sizeof(struct ipt_entry_target) > e->next_offset)
+ return -EINVAL;
+
+ t = ipt_get_target(e);
+ if (e->target_offset + t->u.target_size > e->next_offset)
+ return -EINVAL;
+
+ return 0;
+}
+
+static inline int check_match(struct ipt_entry_match *m, const char *name,
+ const struct ipt_ip *ip, unsigned int hookmask)
+{
+ struct ipt_match *match;
+ int ret;
+
+ match = m->u.kernel.match;
+ ret = xt_check_match(match, AF_INET, m->u.match_size - sizeof(*m),
+ name, hookmask, ip->proto,
+ ip->invflags & IPT_INV_PROTO);
+ if (!ret && m->u.kernel.match->checkentry
+ && !m->u.kernel.match->checkentry(name, ip, match, m->data,
+ hookmask)) {
+ duprintf("ip_tables: check failed for `%s'.\n",
+ m->u.kernel.match->name);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+static inline int
+find_check_match(struct ipt_entry_match *m,
const char *name,
const struct ipt_ip *ip,
unsigned int hookmask,
m->u.user.revision),
"ipt_%s", m->u.user.name);
if (IS_ERR(match) || !match) {
- duprintf("check_match: `%s' not found\n", m->u.user.name);
+ duprintf("find_check_match: `%s' not found\n", m->u.user.name);
return match ? PTR_ERR(match) : -ENOENT;
}
m->u.kernel.match = match;
- ret = xt_check_match(match, AF_INET, m->u.match_size - sizeof(*m),
- name, hookmask, ip->proto,
- ip->invflags & IPT_INV_PROTO);
+ ret = check_match(m, name, ip, hookmask);
if (ret)
goto err;
- if (m->u.kernel.match->checkentry
- && !m->u.kernel.match->checkentry(name, ip, match, m->data,
- hookmask)) {
- duprintf("ip_tables: check failed for `%s'.\n",
- m->u.kernel.match->name);
- ret = -EINVAL;
- goto err;
- }
-
(*i)++;
return 0;
err:
return ret;
}
-static struct ipt_target ipt_standard_target;
+static inline int check_target(struct ipt_entry *e, const char *name)
+{
+ struct ipt_entry_target *t;
+ struct ipt_target *target;
+ int ret;
+
+ t = ipt_get_target(e);
+ target = t->u.kernel.target;
+ ret = xt_check_target(target, AF_INET, t->u.target_size - sizeof(*t),
+ name, e->comefrom, e->ip.proto,
+ e->ip.invflags & IPT_INV_PROTO);
+ if (!ret && t->u.kernel.target->checkentry
+ && !t->u.kernel.target->checkentry(name, e, target,
+ t->data, e->comefrom)) {
+ duprintf("ip_tables: check failed for `%s'.\n",
+ t->u.kernel.target->name);
+ ret = -EINVAL;
+ }
+ return ret;
+}
static inline int
-check_entry(struct ipt_entry *e, const char *name, unsigned int size,
+find_check_entry(struct ipt_entry *e, const char *name, unsigned int size,
unsigned int *i)
{
struct ipt_entry_target *t;
int ret;
unsigned int j;
- if (!ip_checkentry(&e->ip)) {
- duprintf("ip_tables: ip check failed %p %s.\n", e, name);
- return -EINVAL;
- }
-
- if (e->target_offset + sizeof(struct ipt_entry_target) > e->next_offset)
- return -EINVAL;
+ ret = check_entry(e, name);
+ if (ret)
+ return ret;
j = 0;
- ret = IPT_MATCH_ITERATE(e, check_match, name, &e->ip, e->comefrom, &j);
+ ret = IPT_MATCH_ITERATE(e, find_check_match, name, &e->ip,
+ e->comefrom, &j);
if (ret != 0)
goto cleanup_matches;
t = ipt_get_target(e);
- ret = -EINVAL;
- if (e->target_offset + t->u.target_size > e->next_offset)
- goto cleanup_matches;
target = try_then_request_module(xt_find_target(AF_INET,
t->u.user.name,
t->u.user.revision),
"ipt_%s", t->u.user.name);
if (IS_ERR(target) || !target) {
- duprintf("check_entry: `%s' not found\n", t->u.user.name);
+ duprintf("find_check_entry: `%s' not found\n", t->u.user.name);
ret = target ? PTR_ERR(target) : -ENOENT;
goto cleanup_matches;
}
t->u.kernel.target = target;
- ret = xt_check_target(target, AF_INET, t->u.target_size - sizeof(*t),
- name, e->comefrom, e->ip.proto,
- e->ip.invflags & IPT_INV_PROTO);
+ ret = check_target(e, name);
if (ret)
goto err;
- if (t->u.kernel.target->checkentry
- && !t->u.kernel.target->checkentry(name, e, target, t->data,
- e->comefrom)) {
- duprintf("ip_tables: check failed for `%s'.\n",
- t->u.kernel.target->name);
- ret = -EINVAL;
- goto err;
- }
-
(*i)++;
return 0;
err:
/* Finally, each sanity check must pass */
i = 0;
ret = IPT_ENTRY_ITERATE(entry0, newinfo->size,
- check_entry, name, size, &i);
+ find_check_entry, name, size, &i);
if (ret != 0) {
IPT_ENTRY_ITERATE(entry0, newinfo->size,
return -EINVAL;
}
- if (!ip_checkentry(&e->ip)) {
- duprintf("ip_tables: ip check failed %p %s.\n", e, name);
- return -EINVAL;
- }
-
- if (e->target_offset + sizeof(struct compat_xt_entry_target) >
- e->next_offset)
- return -EINVAL;
+ ret = check_entry(e, name);
+ if (ret)
+ return ret;
off = 0;
entry_offset = (void *)e - (void *)base;
goto cleanup_matches;
t = ipt_get_target(e);
- ret = -EINVAL;
- if (e->target_offset + t->u.target_size > e->next_offset)
- goto cleanup_matches;
target = try_then_request_module(xt_find_target(AF_INET,
t->u.user.name,
t->u.user.revision),
"ipt_%s", t->u.user.name);
if (IS_ERR(target) || !target) {
- duprintf("check_entry: `%s' not found\n", t->u.user.name);
+ duprintf("check_compat_entry_size_and_hooks: `%s' not found\n",
+ t->u.user.name);
ret = target ? PTR_ERR(target) : -ENOENT;
goto cleanup_matches;
}
return ret;
}
-static inline int compat_check_match(struct ipt_entry_match *m, const char *name,
- const struct ipt_ip *ip, unsigned int hookmask)
-{
- struct ipt_match *match;
- int ret;
-
- match = m->u.kernel.match;
- ret = xt_check_match(match, AF_INET, m->u.match_size - sizeof(*m),
- name, hookmask, ip->proto,
- ip->invflags & IPT_INV_PROTO);
- if (!ret && m->u.kernel.match->checkentry
- && !m->u.kernel.match->checkentry(name, ip, match, m->data,
- hookmask)) {
- duprintf("ip_tables: compat: check failed for `%s'.\n",
- m->u.kernel.match->name);
- ret = -EINVAL;
- }
- return ret;
-}
-
-static inline int compat_check_target(struct ipt_entry *e, const char *name)
-{
- struct ipt_entry_target *t;
- struct ipt_target *target;
- int ret;
-
- t = ipt_get_target(e);
- target = t->u.kernel.target;
- ret = xt_check_target(target, AF_INET, t->u.target_size - sizeof(*t),
- name, e->comefrom, e->ip.proto,
- e->ip.invflags & IPT_INV_PROTO);
- if (!ret && t->u.kernel.target->checkentry
- && !t->u.kernel.target->checkentry(name, e, target,
- t->data, e->comefrom)) {
- duprintf("ip_tables: compat: check failed for `%s'.\n",
- t->u.kernel.target->name);
- ret = -EINVAL;
- }
- return ret;
-}
-
static inline int compat_check_entry(struct ipt_entry *e, const char *name)
{
int ret;
- ret = IPT_MATCH_ITERATE(e, compat_check_match, name, &e->ip,
- e->comefrom);
+ ret = IPT_MATCH_ITERATE(e, check_match, name, &e->ip, e->comefrom);
if (ret)
return ret;
- return compat_check_target(e, name);
+ return check_target(e, name);
}
static int
cipinfo->config = config;
}
+ if (nf_ct_l3proto_try_module_get(target->family) < 0) {
+ printk(KERN_WARNING "can't load conntrack support for "
+ "proto=%d\n", target->family);
+ return 0;
+ }
+
return 1;
}
clusterip_config_entry_put(cipinfo->config);
clusterip_config_put(cipinfo->config);
+
+ nf_ct_l3proto_module_put(target->family);
}
static struct ipt_target clusterip_tgt = {
{
#define PROC_WRITELEN 10
char buffer[PROC_WRITELEN+1];
- struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
struct clusterip_config *c = pde->data;
unsigned long nodenum;
static ssize_t recent_proc_write(struct file *file, const char __user *input,
size_t size, loff_t *loff)
{
- struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode);
+ struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
struct recent_table *t = pde->data;
struct recent_entry *e;
char buf[sizeof("+255.255.255.255")], *c = buf;
void __user *oldval,
size_t __user *oldlenp,
void __user *newval,
- size_t newlen,
- void **context)
+ size_t newlen)
{
int delay;
if (newlen != sizeof(int))
static int ipv4_sysctl_forward_strategy(ctl_table *table,
int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval, size_t newlen)
{
int *valp = table->data;
int new;
static int sysctl_tcp_congestion_control(ctl_table *table, int __user *name,
int nlen, void __user *oldval,
size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval, size_t newlen)
{
char val[TCP_CA_NAME_MAX];
ctl_table tbl = {
int ret;
tcp_get_default_congestion_control(val);
- ret = sysctl_string(&tbl, name, nlen, oldval, oldlenp, newval, newlen,
- context);
+ ret = sysctl_string(&tbl, name, nlen, oldval, oldlenp, newval, newlen);
if (ret == 0 && newval && newlen)
ret = tcp_set_default_congestion_control(val);
return ret;
static int strategy_allowed_congestion_control(ctl_table *table, int __user *name,
int nlen, void __user *oldval,
size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval,
+ size_t newlen)
{
ctl_table tbl = { .maxlen = TCP_CA_BUF_MAX };
int ret;
return -ENOMEM;
tcp_get_available_congestion_control(tbl.data, tbl.maxlen);
- ret = sysctl_string(&tbl, name, nlen, oldval, oldlenp, newval, newlen,
- context);
+ ret = sysctl_string(&tbl, name, nlen, oldval, oldlenp, newval, newlen);
if (ret == 0 && newval && newlen)
ret = tcp_set_allowed_congestion_control(tbl.data);
kfree(tbl.data);
EXPORT_SYMBOL(__tcp_get_md5sig_pool);
-void __tcp_put_md5sig_pool(void) {
- __tcp_free_md5sig_pool(tcp_md5sig_pool);
+void __tcp_put_md5sig_pool(void)
+{
+ tcp_free_md5sig_pool();
}
EXPORT_SYMBOL(__tcp_put_md5sig_pool);
int __user *name, int nlen,
void __user *oldval,
size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval, size_t newlen)
{
int *valp = table->data;
int new;
static inline int ip6_output_finish(struct sk_buff *skb)
{
-
struct dst_entry *dst = skb->dst;
- struct hh_cache *hh = dst->hh;
-
- if (hh) {
- int hh_alen;
-
- read_lock_bh(&hh->hh_lock);
- hh_alen = HH_DATA_ALIGN(hh->hh_len);
- memcpy(skb->data - hh_alen, hh->hh_data, hh_alen);
- read_unlock_bh(&hh->hh_lock);
- skb_push(skb, hh->hh_len);
- return hh->hh_output(skb);
- } else if (dst->neighbour)
+
+ if (dst->hh)
+ return neigh_hh_output(dst->hh, skb);
+ else if (dst->neighbour)
return dst->neighbour->output(skb);
IP6_INC_STATS_BH(ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
break;
case IPV6_UNICAST_HOPS:
- val = np->hop_limit;
- break;
-
case IPV6_MULTICAST_HOPS:
- val = np->mcast_hops;
+ {
+ struct dst_entry *dst;
+
+ if (optname == IPV6_UNICAST_HOPS)
+ val = np->hop_limit;
+ else
+ val = np->mcast_hops;
+
+ dst = sk_dst_get(sk);
+ if (dst) {
+ if (val < 0)
+ val = dst_metric(dst, RTAX_HOPLIMIT);
+ if (val < 0)
+ val = ipv6_get_hoplimit(dst->dev);
+ dst_release(dst);
+ }
+ if (val < 0)
+ val = ipv6_devconf.hop_limit;
break;
+ }
case IPV6_MULTICAST_LOOP:
val = np->mc_loop;
static int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
int nlen, void __user *oldval,
size_t __user *oldlenp,
- void __user *newval, size_t newlen,
- void **context)
+ void __user *newval, size_t newlen)
{
struct net_device *dev = ctl->extra1;
struct inet6_dev *idev;
switch (ctl->ctl_name) {
case NET_NEIGH_REACHABLE_TIME:
ret = sysctl_jiffies(ctl, name, nlen,
- oldval, oldlenp, newval, newlen,
- context);
+ oldval, oldlenp, newval, newlen);
break;
case NET_NEIGH_RETRANS_TIME_MS:
case NET_NEIGH_REACHABLE_TIME_MS:
ret = sysctl_ms_jiffies(ctl, name, nlen,
- oldval, oldlenp, newval, newlen,
- context);
+ oldval, oldlenp, newval, newlen);
break;
default:
ret = 0;
unsigned int pos = newinfo->hook_entry[hook];
struct ip6t_entry *e
= (struct ip6t_entry *)(entry0 + pos);
+ int visited = e->comefrom & (1 << hook);
if (!(valid_hooks & (1 << hook)))
continue;
|= ((1 << hook) | (1 << NF_IP6_NUMHOOKS));
/* Unconditional return/END. */
- if (e->target_offset == sizeof(struct ip6t_entry)
+ if ((e->target_offset == sizeof(struct ip6t_entry)
&& (strcmp(t->target.u.user.name,
IP6T_STANDARD_TARGET) == 0)
&& t->verdict < 0
- && unconditional(&e->ipv6)) {
+ && unconditional(&e->ipv6)) || visited) {
unsigned int oldpos, size;
if (t->verdict < -NF_MAX_VERDICT - 1) {
goto out; \
pn = fn->parent; \
if (FIB6_SUBTREE(pn) && FIB6_SUBTREE(pn) != fn) \
- fn = fib6_lookup(pn->subtree, NULL, saddr); \
+ fn = fib6_lookup(FIB6_SUBTREE(pn), NULL, saddr); \
else \
fn = pn; \
if (fn->fn_flags & RTN_RTINFO) \
* do something rational.
*/
void ircomm_tty_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
unsigned int cflag = tty->termios->c_cflag;
menu "Core Netfilter Configuration"
- depends on NET && NETFILTER
+ depends on NET && INET && NETFILTER
config NETFILTER_NETLINK
tristate "Netfilter netlink interface"
{
struct xt_connmark_target_info *matchinfo = targinfo;
+ if (nf_ct_l3proto_try_module_get(target->family) < 0) {
+ printk(KERN_WARNING "can't load conntrack support for "
+ "proto=%d\n", target->family);
+ return 0;
+ }
if (matchinfo->mode == XT_CONNMARK_RESTORE) {
if (strcmp(tablename, "mangle") != 0) {
printk(KERN_WARNING "CONNMARK: restore can only be "
return 1;
}
+static void
+destroy(const struct xt_target *target, void *targinfo)
+{
+ nf_ct_l3proto_module_put(target->family);
+}
+
#ifdef CONFIG_COMPAT
struct compat_xt_connmark_target_info {
compat_ulong_t mark, mask;
.name = "CONNMARK",
.family = AF_INET,
.checkentry = checkentry,
+ .destroy = destroy,
.target = target,
.targetsize = sizeof(struct xt_connmark_target_info),
#ifdef CONFIG_COMPAT
.name = "CONNMARK",
.family = AF_INET6,
.checkentry = checkentry,
+ .destroy = destroy,
.target = target,
.targetsize = sizeof(struct xt_connmark_target_info),
.me = THIS_MODULE
static int __init xt_connmark_init(void)
{
- need_conntrack();
return xt_register_targets(xt_connmark_target,
ARRAY_SIZE(xt_connmark_target));
}
{
struct xt_connsecmark_target_info *info = targinfo;
+ if (nf_ct_l3proto_try_module_get(target->family) < 0) {
+ printk(KERN_WARNING "can't load conntrack support for "
+ "proto=%d\n", target->family);
+ return 0;
+ }
switch (info->mode) {
case CONNSECMARK_SAVE:
case CONNSECMARK_RESTORE:
return 1;
}
+static void
+destroy(const struct xt_target *target, void *targinfo)
+{
+ nf_ct_l3proto_module_put(target->family);
+}
+
static struct xt_target xt_connsecmark_target[] = {
{
.name = "CONNSECMARK",
.family = AF_INET,
.checkentry = checkentry,
+ .destroy = destroy,
.target = target,
.targetsize = sizeof(struct xt_connsecmark_target_info),
.table = "mangle",
.name = "CONNSECMARK",
.family = AF_INET6,
.checkentry = checkentry,
+ .destroy = destroy,
.target = target,
.targetsize = sizeof(struct xt_connsecmark_target_info),
.table = "mangle",
static int __init xt_connsecmark_init(void)
{
- need_conntrack();
return xt_register_targets(xt_connsecmark_target,
ARRAY_SIZE(xt_connsecmark_target));
}
sinfo->direction != XT_CONNBYTES_DIR_BOTH)
return 0;
+ if (nf_ct_l3proto_try_module_get(match->family) < 0) {
+ printk(KERN_WARNING "can't load conntrack support for "
+ "proto=%d\n", match->family);
+ return 0;
+ }
+
return 1;
}
+static void
+destroy(const struct xt_match *match, void *matchinfo)
+{
+ nf_ct_l3proto_module_put(match->family);
+}
+
static struct xt_match xt_connbytes_match[] = {
{
.name = "connbytes",
.family = AF_INET,
.checkentry = check,
.match = match,
+ .destroy = destroy,
.matchsize = sizeof(struct xt_connbytes_info),
.me = THIS_MODULE
},
.family = AF_INET6,
.checkentry = check,
.match = match,
+ .destroy = destroy,
.matchsize = sizeof(struct xt_connbytes_info),
.me = THIS_MODULE
},
printk(KERN_WARNING "connmark: only support 32bit mark\n");
return 0;
}
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
if (nf_ct_l3proto_try_module_get(match->family) < 0) {
- printk(KERN_WARNING "can't load nf_conntrack support for "
+ printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
return 0;
}
-#endif
return 1;
}
static void
destroy(const struct xt_match *match, void *matchinfo)
{
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
nf_ct_l3proto_module_put(match->family);
-#endif
}
#ifdef CONFIG_COMPAT
static int __init xt_connmark_init(void)
{
- need_conntrack();
return xt_register_matches(xt_connmark_match,
ARRAY_SIZE(xt_connmark_match));
}
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_conntrack.h>
+#include <net/netfilter/nf_conntrack_compat.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Marc Boucher <marc@mbsi.ca>");
void *matchinfo,
unsigned int hook_mask)
{
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
if (nf_ct_l3proto_try_module_get(match->family) < 0) {
- printk(KERN_WARNING "can't load nf_conntrack support for "
+ printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
return 0;
}
-#endif
return 1;
}
static void destroy(const struct xt_match *match, void *matchinfo)
{
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
nf_ct_l3proto_module_put(match->family);
-#endif
}
static struct xt_match conntrack_match = {
static int __init xt_conntrack_init(void)
{
- need_conntrack();
return xt_register_match(&conntrack_match);
}
#endif
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_helper.h>
+#include <net/netfilter/nf_conntrack_compat.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Martin Josefsson <gandalf@netfilter.org>");
{
struct xt_helper_info *info = matchinfo;
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
if (nf_ct_l3proto_try_module_get(match->family) < 0) {
- printk(KERN_WARNING "can't load nf_conntrack support for "
+ printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
return 0;
}
-#endif
info->name[29] = '\0';
return 1;
}
static void
destroy(const struct xt_match *match, void *matchinfo)
{
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
nf_ct_l3proto_module_put(match->family);
-#endif
}
static struct xt_match xt_helper_match[] = {
static int __init xt_helper_init(void)
{
- need_conntrack();
return xt_register_matches(xt_helper_match,
ARRAY_SIZE(xt_helper_match));
}
if (!(info->bitmask & XT_PHYSDEV_OP_MASK) ||
info->bitmask & ~XT_PHYSDEV_OP_MASK)
return 0;
- if (brnf_deferred_hooks == 0 &&
- info->bitmask & XT_PHYSDEV_OP_OUT &&
+ if (info->bitmask & XT_PHYSDEV_OP_OUT &&
(!(info->bitmask & XT_PHYSDEV_OP_BRIDGED) ||
info->invert & XT_PHYSDEV_OP_BRIDGED) &&
hook_mask & ((1 << NF_IP_LOCAL_OUT) | (1 << NF_IP_FORWARD) |
(1 << NF_IP_POST_ROUTING))) {
printk(KERN_WARNING "physdev match: using --physdev-out in the "
"OUTPUT, FORWARD and POSTROUTING chains for non-bridged "
- "traffic is deprecated and breaks other things, it will "
- "be removed in January 2007. See Documentation/"
- "feature-removal-schedule.txt for details. This doesn't "
- "affect you in case you're using it for purely bridged "
- "traffic.\n");
- brnf_deferred_hooks = 1;
+ "traffic is not supported anymore.\n");
+ if (hook_mask & (1 << NF_IP_LOCAL_OUT))
+ return 0;
}
return 1;
}
void *matchinfo,
unsigned int hook_mask)
{
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
if (nf_ct_l3proto_try_module_get(match->family) < 0) {
- printk(KERN_WARNING "can't load nf_conntrack support for "
+ printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
return 0;
}
-#endif
return 1;
}
static void
destroy(const struct xt_match *match, void *matchinfo)
{
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
nf_ct_l3proto_module_put(match->family);
-#endif
}
static struct xt_match xt_state_match[] = {
static int __init xt_state_init(void)
{
- need_conntrack();
return xt_register_matches(xt_state_match, ARRAY_SIZE(xt_state_match));
}
struct sock *netlink_getsockbyfilp(struct file *filp)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct sock *sock;
if (!S_ISSOCK(inode->i_mode))
return;
}
}
-
- cl = cl_prev->next_alive;
return;
}
} while ((cl_prev = cl) != q->active[prio]);
do {
if (cl->q->ops->drop && (len = cl->q->ops->drop(cl->q))) {
sch->q.qlen--;
+ if (!cl->q->q.qlen)
+ cbq_deactivate_class(cl);
return len;
}
} while ((cl = cl->next_alive) != cl_head);
#endif
}
sch_tree_lock(sch);
- *old = cl->q;
- cl->q = new;
+ *old = xchg(&cl->q, new);
qdisc_tree_decrease_qlen(*old, (*old)->q.qlen);
qdisc_reset(*old);
sch_tree_unlock(sch);
return cl ? cl->q : NULL;
}
+static void cbq_qlen_notify(struct Qdisc *sch, unsigned long arg)
+{
+ struct cbq_class *cl = (struct cbq_class *)arg;
+
+ if (cl->q->q.qlen == 0)
+ cbq_deactivate_class(cl);
+}
+
static unsigned long cbq_get(struct Qdisc *sch, u32 classid)
{
struct cbq_sched_data *q = qdisc_priv(sch);
{
struct cbq_sched_data *q = qdisc_priv(sch);
struct cbq_class *cl = (struct cbq_class*)arg;
+ unsigned int qlen;
if (cl->filters || cl->children || cl == &q->link)
return -EBUSY;
sch_tree_lock(sch);
+ qlen = cl->q->q.qlen;
+ qdisc_reset(cl->q);
+ qdisc_tree_decrease_qlen(cl->q, qlen);
+
if (cl->next_alive)
cbq_deactivate_class(cl);
static struct Qdisc_class_ops cbq_class_ops = {
.graft = cbq_graft,
.leaf = cbq_leaf,
+ .qlen_notify = cbq_qlen_notify,
.get = cbq_get,
.put = cbq_put,
.change = cbq_change_class,
psched_tdiff_t mbuffer; /* max wait time */
long tokens, ctokens; /* current number of tokens */
psched_time_t t_c; /* checkpoint time */
+
+ int prio; /* For parent to leaf return possible here */
+ int quantum; /* we do backup. Finally full replacement */
+ /* of un.leaf originals should be done. */
};
/* TODO: maybe compute rate when size is too large .. or drop ? */
}
}
+static inline int htb_parent_last_child(struct htb_class *cl)
+{
+ if (!cl->parent)
+ /* the root class */
+ return 0;
+
+ if (!(cl->parent->children.next == &cl->sibling &&
+ cl->parent->children.prev == &cl->sibling))
+ /* not the last child */
+ return 0;
+
+ return 1;
+}
+
+static void htb_parent_to_leaf(struct htb_class *cl, struct Qdisc *new_q)
+{
+ struct htb_class *parent = cl->parent;
+
+ BUG_TRAP(!cl->level && cl->un.leaf.q && !cl->prio_activity);
+
+ parent->level = 0;
+ memset(&parent->un.inner, 0, sizeof(parent->un.inner));
+ INIT_LIST_HEAD(&parent->un.leaf.drop_list);
+ parent->un.leaf.q = new_q ? new_q : &noop_qdisc;
+ parent->un.leaf.quantum = parent->quantum;
+ parent->un.leaf.prio = parent->prio;
+ parent->tokens = parent->buffer;
+ parent->ctokens = parent->cbuffer;
+ PSCHED_GET_TIME(parent->t_c);
+ parent->cmode = HTB_CAN_SEND;
+}
+
static void htb_destroy_class(struct Qdisc *sch, struct htb_class *cl)
{
struct htb_sched *q = qdisc_priv(sch);
struct htb_sched *q = qdisc_priv(sch);
struct htb_class *cl = (struct htb_class *)arg;
unsigned int qlen;
+ struct Qdisc *new_q = NULL;
+ int last_child = 0;
// TODO: why don't allow to delete subtree ? references ? does
// tc subsys quarantee us that in htb_destroy it holds no class
if (!list_empty(&cl->children) || cl->filter_cnt)
return -EBUSY;
+ if (!cl->level && htb_parent_last_child(cl)) {
+ new_q = qdisc_create_dflt(sch->dev, &pfifo_qdisc_ops,
+ cl->parent->classid);
+ last_child = 1;
+ }
+
sch_tree_lock(sch);
/* delete from hash and active; remainder in destroy_class */
if (cl->prio_activity)
htb_deactivate(q, cl);
+ if (last_child)
+ htb_parent_to_leaf(cl, new_q);
+
if (--cl->refcnt == 0)
htb_destroy_class(sch, cl);
cl->un.leaf.quantum = hopt->quantum;
if ((cl->un.leaf.prio = hopt->prio) >= TC_HTB_NUMPRIO)
cl->un.leaf.prio = TC_HTB_NUMPRIO - 1;
+
+ /* backup for htb_parent_to_leaf */
+ cl->quantum = cl->un.leaf.quantum;
+ cl->prio = cl->un.leaf.prio;
}
cl->buffer = hopt->buffer;
asoc->default_flags = sp->default_flags;
asoc->default_context = sp->default_context;
asoc->default_timetolive = sp->default_timetolive;
+ asoc->default_rcv_context = sp->default_rcv_context;
return asoc;
#include <asm/uaccess.h>
+/* Event handler for inet6 address addition/deletion events. */
+int sctp_inet6addr_event(struct notifier_block *this, unsigned long ev,
+ void *ptr)
+{
+ struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr;
+ struct sctp_sockaddr_entry *addr;
+ struct list_head *pos, *temp;
+
+ switch (ev) {
+ case NETDEV_UP:
+ addr = kmalloc(sizeof(struct sctp_sockaddr_entry), GFP_ATOMIC);
+ if (addr) {
+ addr->a.v6.sin6_family = AF_INET6;
+ addr->a.v6.sin6_port = 0;
+ memcpy(&addr->a.v6.sin6_addr, &ifa->addr,
+ sizeof(struct in6_addr));
+ addr->a.v6.sin6_scope_id = ifa->idev->dev->ifindex;
+ list_add_tail(&addr->list, &sctp_local_addr_list);
+ }
+ break;
+ case NETDEV_DOWN:
+ list_for_each_safe(pos, temp, &sctp_local_addr_list) {
+ addr = list_entry(pos, struct sctp_sockaddr_entry, list);
+ if (ipv6_addr_equal(&addr->a.v6.sin6_addr, &ifa->addr)) {
+ list_del(pos);
+ kfree(addr);
+ break;
+ }
+ }
+
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
static struct notifier_block sctp_inet6addr_notifier = {
- .notifier_call = sctp_inetaddr_event,
+ .notifier_call = sctp_inet6addr_event,
};
/* ICMP error handler. */
/* Extract our IP addresses from the system and stash them in the
* protocol structure.
*/
-static void __sctp_get_local_addr_list(void)
+static void sctp_get_local_addr_list(void)
{
struct net_device *dev;
struct list_head *pos;
read_unlock(&dev_base_lock);
}
-static void sctp_get_local_addr_list(void)
-{
- unsigned long flags;
-
- sctp_spin_lock_irqsave(&sctp_local_addr_lock, flags);
- __sctp_get_local_addr_list();
- sctp_spin_unlock_irqrestore(&sctp_local_addr_lock, flags);
-}
-
/* Free the existing local addresses. */
-static void __sctp_free_local_addr_list(void)
+static void sctp_free_local_addr_list(void)
{
struct sctp_sockaddr_entry *addr;
struct list_head *pos, *temp;
}
}
-/* Free the existing local addresses. */
-static void sctp_free_local_addr_list(void)
-{
- unsigned long flags;
-
- sctp_spin_lock_irqsave(&sctp_local_addr_lock, flags);
- __sctp_free_local_addr_list();
- sctp_spin_unlock_irqrestore(&sctp_local_addr_lock, flags);
-}
-
/* Copy the local addresses which are valid for 'scope' into 'bp'. */
int sctp_copy_local_addr_list(struct sctp_bind_addr *bp, sctp_scope_t scope,
gfp_t gfp, int copy_flags)
{
struct sctp_sockaddr_entry *addr;
int error = 0;
- struct list_head *pos;
- unsigned long flags;
+ struct list_head *pos, *temp;
- sctp_spin_lock_irqsave(&sctp_local_addr_lock, flags);
- list_for_each(pos, &sctp_local_addr_list) {
+ list_for_each_safe(pos, temp, &sctp_local_addr_list) {
addr = list_entry(pos, struct sctp_sockaddr_entry, list);
if (sctp_in_scope(&addr->a, scope)) {
/* Now that the address is in scope, check to see if
}
end_copy:
- sctp_spin_unlock_irqrestore(&sctp_local_addr_lock, flags);
return error;
}
seq_printf(seq, "%d.%d.%d.%d ", NIPQUAD(addr->v4.sin_addr));
}
-/* Event handler for inet address addition/deletion events.
- * Basically, whenever there is an event, we re-build our local address list.
- */
+/* Event handler for inet address addition/deletion events. */
int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev,
void *ptr)
{
- unsigned long flags;
+ struct in_ifaddr *ifa = (struct in_ifaddr *)ptr;
+ struct sctp_sockaddr_entry *addr;
+ struct list_head *pos, *temp;
- sctp_spin_lock_irqsave(&sctp_local_addr_lock, flags);
- __sctp_free_local_addr_list();
- __sctp_get_local_addr_list();
- sctp_spin_unlock_irqrestore(&sctp_local_addr_lock, flags);
+ switch (ev) {
+ case NETDEV_UP:
+ addr = kmalloc(sizeof(struct sctp_sockaddr_entry), GFP_ATOMIC);
+ if (addr) {
+ addr->a.v4.sin_family = AF_INET;
+ addr->a.v4.sin_port = 0;
+ addr->a.v4.sin_addr.s_addr = ifa->ifa_local;
+ list_add_tail(&addr->list, &sctp_local_addr_list);
+ }
+ break;
+ case NETDEV_DOWN:
+ list_for_each_safe(pos, temp, &sctp_local_addr_list) {
+ addr = list_entry(pos, struct sctp_sockaddr_entry, list);
+ if (addr->a.v4.sin_addr.s_addr == ifa->ifa_local) {
+ list_del(pos);
+ kfree(addr);
+ break;
+ }
+ }
+
+ break;
+ }
return NOTIFY_DONE;
}
/* Initialize the local address list. */
INIT_LIST_HEAD(&sctp_local_addr_list);
- spin_lock_init(&sctp_local_addr_lock);
+
+ sctp_get_local_addr_list();
/* Register notifier for inet address additions/deletions. */
register_inetaddr_notifier(&sctp_inetaddr_notifier);
- sctp_get_local_addr_list();
-
__unsafe(THIS_MODULE);
status = 0;
out:
* __stringify doesn't likes enums, so use IPPROTO_SCTP value (132) directly.
*/
MODULE_ALIAS("net-pf-" __stringify(PF_INET) "-proto-132");
+MODULE_ALIAS("net-pf-" __stringify(PF_INET6) "-proto-132");
MODULE_AUTHOR("Linux Kernel SCTP developers <lksctp-developers@lists.sourceforge.net>");
MODULE_DESCRIPTION("Support for the SCTP protocol (RFC2960)");
MODULE_LICENSE("GPL");
return 0;
}
+/*
+ * 7.1.29. Set or Get the default context (SCTP_CONTEXT)
+ *
+ * The context field in the sctp_sndrcvinfo structure is normally only
+ * used when a failed message is retrieved holding the value that was
+ * sent down on the actual send call. This option allows the setting of
+ * a default context on an association basis that will be received on
+ * reading messages from the peer. This is especially helpful in the
+ * one-2-many model for an application to keep some reference to an
+ * internal state machine that is processing messages on the
+ * association. Note that the setting of this value only effects
+ * received messages from the peer and does not effect the value that is
+ * saved with outbound messages.
+ */
+static int sctp_setsockopt_context(struct sock *sk, char __user *optval,
+ int optlen)
+{
+ struct sctp_assoc_value params;
+ struct sctp_sock *sp;
+ struct sctp_association *asoc;
+
+ if (optlen != sizeof(struct sctp_assoc_value))
+ return -EINVAL;
+ if (copy_from_user(¶ms, optval, optlen))
+ return -EFAULT;
+
+ sp = sctp_sk(sk);
+
+ if (params.assoc_id != 0) {
+ asoc = sctp_id2assoc(sk, params.assoc_id);
+ if (!asoc)
+ return -EINVAL;
+ asoc->default_rcv_context = params.assoc_value;
+ } else {
+ sp->default_rcv_context = params.assoc_value;
+ }
+
+ return 0;
+}
+
/* API 6.2 setsockopt(), getsockopt()
*
* Applications use setsockopt() and getsockopt() to set or retrieve
case SCTP_ADAPTION_LAYER:
retval = sctp_setsockopt_adaption_layer(sk, optval, optlen);
break;
+ case SCTP_CONTEXT:
+ retval = sctp_setsockopt_context(sk, optval, optlen);
+ break;
default:
retval = -ENOPROTOOPT;
sp->default_context = 0;
sp->default_timetolive = 0;
+ sp->default_rcv_context = 0;
+
/* Initialize default setup parameters. These parameters
* can be modified with the SCTP_INITMSG socket option or
* overridden by the SCTP_INIT CMSG.
sctp_assoc_t id;
struct sctp_bind_addr *bp;
struct sctp_association *asoc;
- struct list_head *pos;
+ struct list_head *pos, *temp;
struct sctp_sockaddr_entry *addr;
rwlock_t *addr_lock;
- unsigned long flags;
int cnt = 0;
if (len != sizeof(sctp_assoc_t))
addr = list_entry(bp->address_list.next,
struct sctp_sockaddr_entry, list);
if (sctp_is_any(&addr->a)) {
- sctp_spin_lock_irqsave(&sctp_local_addr_lock, flags);
- list_for_each(pos, &sctp_local_addr_list) {
+ list_for_each_safe(pos, temp, &sctp_local_addr_list) {
addr = list_entry(pos,
struct sctp_sockaddr_entry,
list);
continue;
cnt++;
}
- sctp_spin_unlock_irqrestore(&sctp_local_addr_lock,
- flags);
} else {
cnt = 1;
}
static int sctp_copy_laddrs_to_user_old(struct sock *sk, __u16 port, int max_addrs,
void __user *to)
{
- struct list_head *pos;
+ struct list_head *pos, *next;
struct sctp_sockaddr_entry *addr;
- unsigned long flags;
union sctp_addr temp;
int cnt = 0;
int addrlen;
- sctp_spin_lock_irqsave(&sctp_local_addr_lock, flags);
- list_for_each(pos, &sctp_local_addr_list) {
+ list_for_each_safe(pos, next, &sctp_local_addr_list) {
addr = list_entry(pos, struct sctp_sockaddr_entry, list);
if ((PF_INET == sk->sk_family) &&
(AF_INET6 == addr->a.sa.sa_family))
sctp_get_pf_specific(sk->sk_family)->addr_v4map(sctp_sk(sk),
&temp);
addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
- if (copy_to_user(to, &temp, addrlen)) {
- sctp_spin_unlock_irqrestore(&sctp_local_addr_lock,
- flags);
+ if (copy_to_user(to, &temp, addrlen))
return -EFAULT;
- }
+
to += addrlen;
cnt ++;
if (cnt >= max_addrs) break;
}
- sctp_spin_unlock_irqrestore(&sctp_local_addr_lock, flags);
return cnt;
}
static int sctp_copy_laddrs_to_user(struct sock *sk, __u16 port,
void __user **to, size_t space_left)
{
- struct list_head *pos;
+ struct list_head *pos, *next;
struct sctp_sockaddr_entry *addr;
- unsigned long flags;
union sctp_addr temp;
int cnt = 0;
int addrlen;
- sctp_spin_lock_irqsave(&sctp_local_addr_lock, flags);
- list_for_each(pos, &sctp_local_addr_list) {
+ list_for_each_safe(pos, next, &sctp_local_addr_list) {
addr = list_entry(pos, struct sctp_sockaddr_entry, list);
if ((PF_INET == sk->sk_family) &&
(AF_INET6 == addr->a.sa.sa_family))
addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
if(space_left<addrlen)
return -ENOMEM;
- if (copy_to_user(*to, &temp, addrlen)) {
- sctp_spin_unlock_irqrestore(&sctp_local_addr_lock,
- flags);
+ if (copy_to_user(*to, &temp, addrlen))
return -EFAULT;
- }
+
*to += addrlen;
cnt ++;
space_left -= addrlen;
}
- sctp_spin_unlock_irqrestore(&sctp_local_addr_lock, flags);
return cnt;
}
}
/*
+ * 7.1.29. Set or Get the default context (SCTP_CONTEXT)
+ * (chapter and verse is quoted at sctp_setsockopt_context())
+ */
+static int sctp_getsockopt_context(struct sock *sk, int len,
+ char __user *optval, int __user *optlen)
+{
+ struct sctp_assoc_value params;
+ struct sctp_sock *sp;
+ struct sctp_association *asoc;
+
+ if (len != sizeof(struct sctp_assoc_value))
+ return -EINVAL;
+
+ if (copy_from_user(¶ms, optval, len))
+ return -EFAULT;
+
+ sp = sctp_sk(sk);
+
+ if (params.assoc_id != 0) {
+ asoc = sctp_id2assoc(sk, params.assoc_id);
+ if (!asoc)
+ return -EINVAL;
+ params.assoc_value = asoc->default_rcv_context;
+ } else {
+ params.assoc_value = sp->default_rcv_context;
+ }
+
+ if (put_user(len, optlen))
+ return -EFAULT;
+ if (copy_to_user(optval, ¶ms, len))
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
* 7.1.17 Set the maximum fragrmentation size (SCTP_MAXSEG)
*
* This socket option specifies the maximum size to put in any outgoing
retval = sctp_getsockopt_adaption_layer(sk, len, optval,
optlen);
break;
+ case SCTP_CONTEXT:
+ retval = sctp_getsockopt_context(sk, len, optval, optlen);
+ break;
default:
retval = -ENOPROTOOPT;
break;
*/
sinfo.sinfo_assoc_id = sctp_assoc2id(event->asoc);
+ /* context value that is set via SCTP_CONTEXT socket option. */
+ sinfo.sinfo_context = event->asoc->default_rcv_context;
+
/* These fields are not used while receiving. */
- sinfo.sinfo_context = 0;
sinfo.sinfo_timetolive = 0;
put_cmsg(msghdr, IPPROTO_SCTP, SCTP_SNDRCV,
this.name = name;
this.hash = 0;
- file->f_dentry = d_alloc(sock_mnt->mnt_sb->s_root, &this);
- if (unlikely(!file->f_dentry))
+ file->f_path.dentry = d_alloc(sock_mnt->mnt_sb->s_root, &this);
+ if (unlikely(!file->f_path.dentry))
return -ENOMEM;
- file->f_dentry->d_op = &sockfs_dentry_operations;
+ file->f_path.dentry->d_op = &sockfs_dentry_operations;
/*
* We dont want to push this dentry into global dentry hash table.
* We pretend dentry is already hashed, by unsetting DCACHE_UNHASHED
* This permits a working /proc/$pid/fd/XXX on sockets
*/
- file->f_dentry->d_flags &= ~DCACHE_UNHASHED;
- d_instantiate(file->f_dentry, SOCK_INODE(sock));
- file->f_vfsmnt = mntget(sock_mnt);
- file->f_mapping = file->f_dentry->d_inode->i_mapping;
+ file->f_path.dentry->d_flags &= ~DCACHE_UNHASHED;
+ d_instantiate(file->f_path.dentry, SOCK_INODE(sock));
+ file->f_path.mnt = mntget(sock_mnt);
+ file->f_mapping = file->f_path.dentry->d_inode->i_mapping;
sock->file = file;
file->f_op = SOCK_INODE(sock)->i_fop = &socket_file_ops;
if (file->f_op == &socket_file_ops)
return file->private_data; /* set in sock_map_fd */
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if (!S_ISSOCK(inode->i_mode)) {
*err = -ENOTSOCK;
return NULL;
if (!buf)
goto out;
- clnt = RPC_I(filp->f_dentry->d_inode)->private;
+ clnt = RPC_I(filp->f_path.dentry->d_inode)->private;
err = -EFAULT;
if (copy_from_user(buf, src, mlen))
goto err;
integ_len = svc_getnl(&buf->head[0]);
if (integ_len & 3)
- goto out;
+ return stat;
if (integ_len > buf->len)
- goto out;
+ return stat;
if (xdr_buf_subsegment(buf, &integ_buf, 0, integ_len))
BUG();
/* copy out mic... */
if (read_u32_from_xdr_buf(buf, integ_len, &mic.len))
BUG();
if (mic.len > RPC_MAX_AUTH_SIZE)
- goto out;
+ return stat;
mic.data = kmalloc(mic.len, GFP_KERNEL);
if (!mic.data)
- goto out;
+ return stat;
if (read_bytes_from_xdr_buf(buf, integ_len + 4, mic.data, mic.len))
goto out;
maj_stat = gss_verify_mic(ctx, &integ_buf, &mic);
goto out;
stat = 0;
out:
+ kfree(mic.data);
return stat;
}
}
switch(cache_check(&rsi_cache, &rsip->h, &rqstp->rq_chandle)) {
case -EAGAIN:
- goto drop;
+ case -ETIMEDOUT:
case -ENOENT:
goto drop;
case 0:
#define RPCDBG_FACILITY RPCDBG_CACHE
-static void cache_defer_req(struct cache_req *req, struct cache_head *item);
+static int cache_defer_req(struct cache_req *req, struct cache_head *item);
static void cache_revisit_request(struct cache_head *item);
static void cache_init(struct cache_head *h)
*
* Returns 0 if the cache_head can be used, or cache_puts it and returns
* -EAGAIN if upcall is pending,
+ * -ETIMEDOUT if upcall failed and should be retried,
* -ENOENT if cache entry was negative
*/
int cache_check(struct cache_detail *detail,
}
if (rv == -EAGAIN)
- cache_defer_req(rqstp, h);
+ if (cache_defer_req(rqstp, h) != 0)
+ rv = -ETIMEDOUT;
if (rv)
cache_put(h, detail);
static struct list_head cache_defer_hash[DFR_HASHSIZE];
static int cache_defer_cnt;
-static void cache_defer_req(struct cache_req *req, struct cache_head *item)
+static int cache_defer_req(struct cache_req *req, struct cache_head *item)
{
struct cache_deferred_req *dreq;
int hash = DFR_HASH(item);
+ if (cache_defer_cnt >= DFR_MAX) {
+ /* too much in the cache, randomly drop this one,
+ * or continue and drop the oldest below
+ */
+ if (net_random()&1)
+ return -ETIMEDOUT;
+ }
dreq = req->defer(req);
if (dreq == NULL)
- return;
+ return -ETIMEDOUT;
dreq->item = item;
dreq->recv_time = get_seconds();
/* it is in, now maybe clean up */
dreq = NULL;
if (++cache_defer_cnt > DFR_MAX) {
- /* too much in the cache, randomly drop
- * first or last
- */
- if (net_random()&1)
- dreq = list_entry(cache_defer_list.next,
- struct cache_deferred_req,
- recent);
- else
- dreq = list_entry(cache_defer_list.prev,
- struct cache_deferred_req,
- recent);
+ dreq = list_entry(cache_defer_list.prev,
+ struct cache_deferred_req, recent);
list_del(&dreq->recent);
list_del(&dreq->hash);
cache_defer_cnt--;
/* must have just been validated... */
cache_revisit_request(item);
}
+ return 0;
}
static void cache_revisit_request(struct cache_head *item)
{
struct cache_reader *rp = filp->private_data;
struct cache_request *rq;
- struct cache_detail *cd = PDE(filp->f_dentry->d_inode)->data;
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
int err;
if (count == 0)
loff_t *ppos)
{
int err;
- struct cache_detail *cd = PDE(filp->f_dentry->d_inode)->data;
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
if (count == 0)
return 0;
unsigned int mask;
struct cache_reader *rp = filp->private_data;
struct cache_queue *cq;
- struct cache_detail *cd = PDE(filp->f_dentry->d_inode)->data;
+ struct cache_detail *cd = PDE(filp->f_path.dentry->d_inode)->data;
poll_wait(filp, &queue_wait, wait);
static ssize_t read_flush(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct cache_detail *cd = PDE(file->f_dentry->d_inode)->data;
+ struct cache_detail *cd = PDE(file->f_path.dentry->d_inode)->data;
char tbuf[20];
unsigned long p = *ppos;
int len;
static ssize_t write_flush(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
- struct cache_detail *cd = PDE(file->f_dentry->d_inode)->data;
+ struct cache_detail *cd = PDE(file->f_path.dentry->d_inode)->data;
char tbuf[20];
char *ep;
long flushtime;
static ssize_t
rpc_pipe_read(struct file *filp, char __user *buf, size_t len, loff_t *offset)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct rpc_inode *rpci = RPC_I(inode);
struct rpc_pipe_msg *msg;
int res = 0;
static ssize_t
rpc_pipe_write(struct file *filp, const char __user *buf, size_t len, loff_t *offset)
{
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
struct rpc_inode *rpci = RPC_I(inode);
int res;
struct rpc_inode *rpci;
unsigned int mask = 0;
- rpci = RPC_I(filp->f_dentry->d_inode);
+ rpci = RPC_I(filp->f_path.dentry->d_inode);
poll_wait(filp, &rpci->waitq, wait);
mask = POLLOUT | POLLWRNORM;
rpc_pipe_ioctl(struct inode *ino, struct file *filp,
unsigned int cmd, unsigned long arg)
{
- struct rpc_inode *rpci = RPC_I(filp->f_dentry->d_inode);
+ struct rpc_inode *rpci = RPC_I(filp->f_path.dentry->d_inode);
int len;
switch (cmd) {
serv->sv_nrpools = npools;
serv->sv_pools =
- kcalloc(sizeof(struct svc_pool), serv->sv_nrpools,
+ kcalloc(serv->sv_nrpools, sizeof(struct svc_pool),
GFP_KERNEL);
if (!serv->sv_pools) {
kfree(serv);
return NULL;
kref_init(&new->h.ref);
new->h.name = kstrdup(name, GFP_KERNEL);
+ if (new->h.name == NULL) {
+ kfree(new);
+ return NULL;
+ }
new->h.flavour = &svcauth_unix;
new->addr_changes = 0;
rv = auth_domain_lookup(name, &new->h);
default:
BUG();
case -EAGAIN:
+ case -ETIMEDOUT:
return SVC_DROP;
case -ENOENT:
return SVC_DENIED;
if (mng.link_subscriptions > 64)
break;
- sub = (struct subscr_data *)kmalloc(sizeof(*sub),
+ sub = kmalloc(sizeof(*sub),
GFP_ATOMIC);
if (sub == NULL) {
warn("Memory squeeze; dropped remote link subscription\n");
static struct sock *unix_get_socket(struct file *filp)
{
struct sock *u_sock = NULL;
- struct inode *inode = filp->f_dentry->d_inode;
+ struct inode *inode = filp->f_path.dentry->d_inode;
/*
* Socket ?
# gcc support functions
# See documentation in Documentation/kbuild/makefiles.txt
+# output directory for tests below
+TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)
+
# as-option
# Usage: cflags-y += $(call as-option, -Wa$(comma)-isa=foo,)
# as-instr
# Usage: cflags-y += $(call as-instr, instr, option1, option2)
-as-instr = $(shell if echo -e "$(1)" | $(AS) >/dev/null 2>&1 -W -Z -o astest$$$$.out ; \
- then echo "$(2)"; else echo "$(3)"; fi; \
- rm -f astest$$$$.out)
+as-instr = $(shell if echo -e "$(1)" | \
+ $(CC) $(AFLAGS) -c -xassembler - \
+ -o $(TMPOUT)astest$$$$.out > /dev/null 2>&1; \
+ then rm $(TMPOUT)astest$$$$.out; echo "$(2)"; \
+ else echo "$(3)"; fi)
# cc-option
# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
# ld-option
# Usage: ldflags += $(call ld-option, -Wl$(comma)--hash-style=both)
-ld-option = $(shell if $(CC) $(1) \
- -nostdlib -o ldtest$$$$.out -xc /dev/null \
- > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi; \
- rm -f ldtest$$$$.out)
+ld-option = $(shell if $(CC) $(1) -nostdlib -xc /dev/null \
+ -o $(TMPOUT)ldtest$$$$.out > /dev/null 2>&1; \
+ then rm $(TMPOUT)ldtest$$$$.out; echo "$(1)"; \
+ else echo "$(2)"; fi)
###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
printf("#define ALGN .align 4\n");
printf("#endif\n");
- printf(".data\n");
+ printf("\t.section .rodata, \"a\"\n");
/* Provide proper symbols relocatability by their '_text'
* relativeness. The symbol names cannot be used to construct
input_mode = ask_silent;
valid_stdin = 1;
}
- } else if (sym_change_count) {
+ } else if (conf_get_changed()) {
name = getenv("KCONFIG_NOSILENTUPDATE");
if (name && *name) {
fprintf(stderr, _("\n*** Kernel configuration requires explicit update.\n\n"));
in = zconf_fopen(name);
if (in)
goto load;
- sym_change_count++;
+ sym_add_change_count(1);
if (!sym_defconfig_list)
return 1;
struct expr *e;
int i, flags;
- sym_change_count = 0;
+ sym_set_change_count(0);
if (conf_read_simple(name, S_DEF_USER))
return 1;
sym->flags &= flags | ~SYMBOL_DEF_USER;
}
- sym_change_count += conf_warnings || conf_unsaved;
+ sym_add_change_count(conf_warnings || conf_unsaved);
return 0;
}
use_timestamp ? "# " : "",
use_timestamp ? ctime(&now) : "");
- if (!sym_change_count)
+ if (!conf_get_changed())
sym_clear_all_valid();
menu = rootmenu.list;
"# configuration written to %s\n"
"#\n"), newname);
- sym_change_count = 0;
+ sym_set_change_count(0);
return 0;
}
return 0;
}
+
+static int sym_change_count;
+static void (*conf_changed_callback)(void);
+
+void sym_set_change_count(int count)
+{
+ int _sym_change_count = sym_change_count;
+ sym_change_count = count;
+ if (conf_changed_callback &&
+ (bool)_sym_change_count != (bool)count)
+ conf_changed_callback();
+}
+
+void sym_add_change_count(int count)
+{
+ sym_set_change_count(count + sym_change_count);
+}
+
+bool conf_get_changed(void)
+{
+ return sym_change_count;
+}
+
+void conf_set_changed_callback(void (*fn)(void))
+{
+ conf_changed_callback = fn;
+}
static gboolean show_debug = FALSE;
static gboolean resizeable = FALSE;
-static gboolean config_changed = FALSE;
-
static char nohelp_text[] =
N_("Sorry, no help available for this option yet.\n");
GtkWidget *hpaned = NULL;
GtkWidget *vpaned = NULL;
GtkWidget *back_btn = NULL;
+GtkWidget *save_btn = NULL;
+GtkWidget *save_menu_item = NULL;
GtkTextTag *tag1, *tag2;
GdkColor color;
static void update_tree(struct menu *src, GtkTreeIter * dst);
static void set_node(GtkTreeIter * node, struct menu *menu, gchar ** row);
static gchar **fill_row(struct menu *menu);
-
+static void conf_changed(void);
/* Helping/Debugging Functions */
gtk_check_menu_item_set_active((GtkCheckMenuItem *) widget,
show_value);
+ save_btn = glade_xml_get_widget(xml, "button3");
+ save_menu_item = glade_xml_get_widget(xml, "save1");
+ conf_set_changed_callback(conf_changed);
+
style = gtk_widget_get_style(main_wnd);
widget = glade_xml_get_widget(xml, "toolbar1");
/* Main Windows Callbacks */
-void on_save1_activate(GtkMenuItem * menuitem, gpointer user_data);
+void on_save_activate(GtkMenuItem * menuitem, gpointer user_data);
gboolean on_window1_delete_event(GtkWidget * widget, GdkEvent * event,
gpointer user_data)
{
GtkWidget *dialog, *label;
gint result;
- if (config_changed == FALSE)
+ if (!conf_get_changed())
return FALSE;
dialog = gtk_dialog_new_with_buttons(_("Warning !"),
result = gtk_dialog_run(GTK_DIALOG(dialog));
switch (result) {
case GTK_RESPONSE_YES:
- on_save1_activate(NULL, NULL);
+ on_save_activate(NULL, NULL);
return FALSE;
case GTK_RESPONSE_NO:
return FALSE;
}
-void on_save1_activate(GtkMenuItem * menuitem, gpointer user_data)
+void on_save_activate(GtkMenuItem * menuitem, gpointer user_data)
{
if (conf_write(NULL))
text_insert_msg(_("Error"), _("Unable to save configuration !"));
-
- config_changed = FALSE;
}
}
-void on_save_clicked(GtkButton * button, gpointer user_data)
-{
- on_save1_activate(NULL, user_data);
-}
-
-
void on_single_clicked(GtkButton * button, gpointer user_data)
{
view_mode = SINGLE_VIEW;
sym_set_string_value(sym, new_def);
- config_changed = TRUE;
update_tree(&rootmenu, NULL);
gtk_tree_path_free(path);
if (!sym_tristate_within_range(sym, newval))
newval = yes;
sym_set_tristate_value(sym, newval);
- config_changed = TRUE;
if (view_mode == FULL_VIEW)
update_tree(&rootmenu, NULL);
else if (view_mode == SPLIT_VIEW) {
return 0;
}
+
+static void conf_changed(void)
+{
+ bool changed = conf_get_changed();
+ gtk_widget_set_sensitive(save_btn, changed);
+ gtk_widget_set_sensitive(save_menu_item, changed);
+}
<property name="tooltip" translatable="yes">Save the config in .config</property>
<property name="label" translatable="yes">_Save</property>
<property name="use_underline">True</property>
- <signal name="activate" handler="on_save1_activate"/>
+ <signal name="activate" handler="on_save_activate"/>
<accelerator key="S" modifiers="GDK_CONTROL_MASK" signal="activate"/>
<child internal-child="image">
<property name="visible_horizontal">True</property>
<property name="visible_vertical">True</property>
<property name="is_important">False</property>
- <signal name="clicked" handler="on_save_clicked"/>
+ <signal name="clicked" handler="on_save_activate"/>
</widget>
<packing>
<property name="expand">False</property>
/* confdata.c */
char *conf_get_default_confname(void);
+void sym_set_change_count(int count);
+void sym_add_change_count(int count);
/* kconfig_load.c */
void kconfig_load(void);
P(conf_read_simple,int,(const char *name, int));
P(conf_write,int,(const char *name));
P(conf_write_autoconf,int,(void));
+P(conf_get_changed,bool,(void));
+P(conf_set_changed_callback, void,(void (*fn)(void)));
/* menu.c */
P(rootmenu,struct menu,);
/* symbol.c */
P(symbol_hash,struct symbol *,[SYMBOL_HASHSIZE]);
-P(sym_change_count,int,);
P(sym_lookup,struct symbol *,(const char *name, int isconst));
P(sym_find,struct symbol *,(const char *name));
do {
conf(&rootmenu);
dialog_clear();
- res = dialog_yesno(NULL,
- _("Do you wish to save your "
- "new kernel configuration?\n"
- "<ESC><ESC> to continue."),
- 6, 60);
+ if (conf_get_changed())
+ res = dialog_yesno(NULL,
+ _("Do you wish to save your "
+ "new kernel configuration?\n"
+ "<ESC><ESC> to continue."),
+ 6, 60);
+ else
+ res = -1;
} while (res == KEY_ESC);
end_dialog();
- if (res == 0) {
+
+ switch (res) {
+ case 0:
if (conf_write(NULL)) {
fprintf(stderr, _("\n\n"
"Error during writing of the kernel configuration.\n"
"\n\n"));
return 1;
}
+ case -1:
printf(_("\n\n"
"*** End of Linux kernel configuration.\n"
"*** Execute 'make' to build the kernel or try 'make help'."
"\n\n"));
- } else {
+ break;
+ default:
fprintf(stderr, _("\n\n"
"Your kernel configuration changes were NOT saved."
"\n\n"));
static QApplication *configApp;
static ConfigSettings *configSettings;
+QAction *ConfigMainWindow::saveAction;
+
static inline QString qgettext(const char* str)
{
return QString::fromLocal8Bit(gettext(str));
connect(quitAction, SIGNAL(activated()), SLOT(close()));
QAction *loadAction = new QAction("Load", QPixmap(xpm_load), "&Load", CTRL+Key_L, this);
connect(loadAction, SIGNAL(activated()), SLOT(loadConfig()));
- QAction *saveAction = new QAction("Save", QPixmap(xpm_save), "&Save", CTRL+Key_S, this);
+ saveAction = new QAction("Save", QPixmap(xpm_save), "&Save", CTRL+Key_S, this);
connect(saveAction, SIGNAL(activated()), SLOT(saveConfig()));
+ conf_set_changed_callback(conf_changed);
+ // Set saveAction's initial state
+ conf_changed();
QAction *saveAsAction = new QAction("Save As...", "Save &As...", 0, this);
connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs()));
QAction *searchAction = new QAction("Search", "&Search", CTRL+Key_F, this);
*/
void ConfigMainWindow::closeEvent(QCloseEvent* e)
{
- if (!sym_change_count) {
+ if (!conf_get_changed()) {
e->accept();
return;
}
configSettings->writeSizes("/split2", split2->sizes());
}
+void ConfigMainWindow::conf_changed(void)
+{
+ if (saveAction)
+ saveAction->setEnabled(conf_get_changed());
+}
+
void fixup_rootmenu(struct menu *menu)
{
struct menu *child;
class ConfigMainWindow : public QMainWindow {
Q_OBJECT
+
+ static QAction *saveAction;
+ static void conf_changed(void);
public:
ConfigMainWindow(void);
public slots:
.flags = SYMBOL_VALID,
};
-int sym_change_count;
struct symbol *sym_defconfig_list;
struct symbol *modules_sym;
tristate modules_val;
for_all_symbols(i, sym)
sym->flags &= ~SYMBOL_VALID;
- sym_change_count++;
+ sym_add_change_count(1);
if (modules_sym)
sym_calc_value(modules_sym);
}
sym_check_deps(sym);
}
- sym_change_count = 1;
+ sym_set_change_count(1);
}
const char *zconf_tokenname(int token)
sym_check_deps(sym);
}
- sym_change_count = 1;
+ sym_set_change_count(1);
}
const char *zconf_tokenname(int token)
"__bug_table", /* used by powerpc for BUG() */
".exitcall.exit",
".eh_frame",
+ ".parainstructions",
".stab",
"__ex_table",
".fixup",
{
struct task_security_struct *tsec = tsk->security;
struct file_security_struct *fsec = file->f_security;
- struct vfsmount *mnt = file->f_vfsmnt;
- struct dentry *dentry = file->f_dentry;
+ struct vfsmount *mnt = file->f_path.mnt;
+ struct dentry *dentry = file->f_path.dentry;
struct inode *inode = dentry->d_inode;
struct avc_audit_data ad;
int rc;
static int selinux_bprm_set_security(struct linux_binprm *bprm)
{
struct task_security_struct *tsec;
- struct inode *inode = bprm->file->f_dentry->d_inode;
+ struct inode *inode = bprm->file->f_path.dentry->d_inode;
struct inode_security_struct *isec;
struct bprm_security_struct *bsec;
u32 newsid;
}
AVC_AUDIT_DATA_INIT(&ad, FS);
- ad.u.fs.mnt = bprm->file->f_vfsmnt;
- ad.u.fs.dentry = bprm->file->f_dentry;
+ ad.u.fs.mnt = bprm->file->f_path.mnt;
+ ad.u.fs.dentry = bprm->file->f_path.dentry;
- if (bprm->file->f_vfsmnt->mnt_flags & MNT_NOSUID)
+ if (bprm->file->f_path.mnt->mnt_flags & MNT_NOSUID)
newsid = tsec->sid;
if (tsec->sid == newsid) {
struct tty_struct *tty;
struct fdtable *fdt;
long j = -1;
+ int drop_tty = 0;
mutex_lock(&tty_mutex);
- tty = current->signal->tty;
+ tty = get_current_tty();
if (tty) {
file_list_lock();
file = list_entry(tty->tty_files.next, typeof(*file), f_u.fu_list);
than using file_has_perm, as this particular open
file may belong to another process and we are only
interested in the inode-based check here. */
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
if (inode_has_perm(current, inode,
FILE__READ | FILE__WRITE, NULL)) {
- /* Reset controlling tty. */
- current->signal->tty = NULL;
- current->signal->tty_old_pgrp = 0;
+ drop_tty = 1;
}
}
file_list_unlock();
+
+ /* Reset controlling tty. */
+ if (drop_tty)
+ proc_set_tty(current, NULL);
}
mutex_unlock(&tty_mutex);
j++;
i = j * __NFDBITS;
fdt = files_fdtable(files);
- if (i >= fdt->max_fds || i >= fdt->max_fdset)
+ if (i >= fdt->max_fds)
break;
set = fdt->open_fds->fds_bits[j];
if (!set)
static int selinux_file_permission(struct file *file, int mask)
{
int rc;
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
if (!mask) {
/* No permission to check. Existence test. */
switch (cmd) {
case F_SETFL:
- if (!file->f_dentry || !file->f_dentry->d_inode) {
+ if (!file->f_path.dentry || !file->f_path.dentry->d_inode) {
err = -EINVAL;
break;
}
case F_SETLK64:
case F_SETLKW64:
#endif
- if (!file->f_dentry || !file->f_dentry->d_inode) {
+ if (!file->f_path.dentry || !file->f_path.dentry->d_inode) {
err = -EINVAL;
break;
}
static ssize_t selinux_transaction_write(struct file *file, const char __user *buf, size_t size, loff_t *pos)
{
- ino_t ino = file->f_dentry->d_inode->i_ino;
+ ino_t ino = file->f_path.dentry->d_inode->i_ino;
char *data;
ssize_t rv;
goto out;
}
- inode = filep->f_dentry->d_inode;
+ inode = filep->f_path.dentry->d_inode;
cur_enforcing = security_get_bool_value(inode->i_ino - BOOL_INO_OFFSET);
if (cur_enforcing < 0) {
ret = cur_enforcing;
if (new_value)
new_value = 1;
- inode = filep->f_dentry->d_inode;
+ inode = filep->f_path.dentry->d_inode;
bool_pending_values[inode->i_ino - BOOL_INO_OFFSET] = new_value;
length = count;
file_list_lock();
list_for_each(p, &sb->s_files) {
struct file * filp = list_entry(p, struct file, f_u.fu_list);
- struct dentry * dentry = filp->f_dentry;
+ struct dentry * dentry = filp->f_path.dentry;
if (dentry->d_parent != de) {
continue;
endif
+config AC97_BUS
+ tristate
+ help
+ This is used to avoid config and link hard dependencies between the
+ sound subsystem and other function drivers completely unrelated to
+ sound although they're sharing the AC97 bus. Concerned drivers
+ should "select" this.
+
endmenu
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/
obj-$(CONFIG_SND_AOA) += aoa/
+# This one must be compilable even if sound is configured out
+obj-$(CONFIG_AC97_BUS) += ac97_bus.o
+
ifeq ($(CONFIG_SND),y)
obj-y += last.o
endif
config SND_AOA_FABRIC_LAYOUT
tristate "layout-id fabric"
- depends SND_AOA
+ depends on SND_AOA
select SND_AOA_SOUNDBUS
select SND_AOA_SOUNDBUS_I2S
---help---
static int snd_info_entry_mmap(struct file *file, struct vm_area_struct *vma)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
struct snd_info_private_data *data;
struct snd_info_entry *entry;
}
up_read(&mixer->card->controls_rwsem);
if (slot.present != 0) {
- pslot = (struct slot *)kmalloc(sizeof(slot), GFP_KERNEL);
+ pslot = kmalloc(sizeof(slot), GFP_KERNEL);
if (! pslot)
return -ENOMEM;
*pslot = slot;
file = fget(fd);
if (!file)
return NULL;
- inode = file->f_dentry->d_inode;
+ inode = file->f_path.dentry->d_inode;
if (!S_ISCHR(inode->i_mode) ||
imajor(inode) != snd_major) {
fput(file);
config SND_AC97_CODEC
tristate
select SND_PCM
- select SND_AC97_BUS
-
-config SND_AC97_BUS
- tristate
-
+ select AC97_BUS
config SND_DUMMY
tristate "Dummy (/dev/null) soundcard"
devc->audio_flags |= DMA_DUPLEX;
}
- portc = (ad1848_port_info *) kmalloc(sizeof(ad1848_port_info), GFP_KERNEL);
+ portc = kmalloc(sizeof(ad1848_port_info), GFP_KERNEL);
if(portc==NULL) {
release_region(devc->base, 4);
return -1;
{
struct address_info *isapnpcfg;
- isapnpcfg=(struct address_info*)kmalloc(sizeof(*isapnpcfg),GFP_KERNEL);
+ isapnpcfg = kmalloc(sizeof(*isapnpcfg),GFP_KERNEL);
if (!isapnpcfg)
return -ENOMEM;
if (file->f_mode & FMODE_WRITE) {
if (write_sq.busy)
- rc = sq_fsync(file, file->f_dentry);
+ rc = sq_fsync(file, file->f_path.dentry);
sq_reset_output() ; /* make sure dma is stopped and all is quiet */
write_sq_release_buffers();
if ((file->f_mode & FMODE_READ) && dmasound.mach.record)
sq_reset_input() ;
if (file->f_mode & FMODE_WRITE) {
- result = sq_fsync(file, file->f_dentry);
+ result = sq_fsync(file, file->f_path.dentry);
sq_reset_output() ;
}
/* if we are the shared resource owner then release them */
match:
- wave_dev = (struct emu10k1_wavedevice *) kmalloc(sizeof(struct emu10k1_wavedevice), GFP_KERNEL);
+ wave_dev = kmalloc(sizeof(struct emu10k1_wavedevice), GFP_KERNEL);
if (wave_dev == NULL) {
ERROR();
/* Recording */
struct wiinst *wiinst;
- if ((wiinst = (struct wiinst *) kmalloc(sizeof(struct wiinst), GFP_KERNEL)) == NULL) {
+ if ((wiinst = kmalloc(sizeof(struct wiinst), GFP_KERNEL)) == NULL) {
ERROR();
kfree(wave_dev);
return -ENOMEM;
struct woinst *woinst;
int i;
- if ((woinst = (struct woinst *) kmalloc(sizeof(struct woinst), GFP_KERNEL)) == NULL) {
+ if ((woinst = kmalloc(sizeof(struct woinst), GFP_KERNEL)) == NULL) {
ERROR();
kfree(wave_dev);
return -ENOMEM;
midihdr->flags |= MIDIBUF_INQUEUE; /* set */
midihdr->flags &= ~MIDIBUF_DONE; /* clear */
- if ((midiq = (struct midi_queue *) kmalloc(sizeof(struct midi_queue), GFP_ATOMIC)) == NULL) {
+ if ((midiq = kmalloc(sizeof(struct midi_queue), GFP_ATOMIC)) == NULL) {
/* Message lost */
return -1;
}
midihdr->flags |= MIDIBUF_INQUEUE;
midihdr->flags &= ~MIDIBUF_DONE;
- if ((midiq = (struct midi_queue *) kmalloc(sizeof(struct midi_queue), GFP_KERNEL)) == NULL) {
+ if ((midiq = kmalloc(sizeof(struct midi_queue), GFP_KERNEL)) == NULL) {
/* Message lost */
return -1;
}
{
struct midi_hdr *midihdr;
- if ((midihdr = (struct midi_hdr *) kmalloc(sizeof(struct midi_hdr), GFP_KERNEL)) == NULL) {
+ if ((midihdr = kmalloc(sizeof(struct midi_hdr), GFP_KERNEL)) == NULL) {
ERROR();
return -EINVAL;
}
mutex_lock(&card->open_sem);
}
- if ((midi_dev = (struct emu10k1_mididevice *) kmalloc(sizeof(*midi_dev), GFP_KERNEL)) == NULL)
+ if ((midi_dev = kmalloc(sizeof(*midi_dev), GFP_KERNEL)) == NULL)
return -EINVAL;
midi_dev->card = card;
if (!access_ok(VERIFY_READ, buffer, count))
return -EFAULT;
- if ((midihdr = (struct midi_hdr *) kmalloc(sizeof(struct midi_hdr), GFP_KERNEL)) == NULL)
+ if ((midihdr = kmalloc(sizeof(struct midi_hdr), GFP_KERNEL)) == NULL)
return -EINVAL;
midihdr->bufferlength = count;
DPF(2, "emu10k1_seq_midi_open()\n");
- if ((midi_dev = (struct emu10k1_mididevice *) kmalloc(sizeof(*midi_dev), GFP_KERNEL)) == NULL)
+ if ((midi_dev = kmalloc(sizeof(*midi_dev), GFP_KERNEL)) == NULL)
return -EINVAL;
midi_dev->card = card;
card = midi_devs[dev]->devc;
- if ((midihdr = (struct midi_hdr *) kmalloc(sizeof(struct midi_hdr), GFP_KERNEL)) == NULL)
+ if ((midihdr = kmalloc(sizeof(struct midi_hdr), GFP_KERNEL)) == NULL)
return -EINVAL;
midihdr->bufferlength = 1;
case SOUND_MIXER_PRIVATE3:
- ctl = (struct mixer_private_ioctl *) kmalloc(sizeof(struct mixer_private_ioctl), GFP_KERNEL);
+ ctl = kmalloc(sizeof(struct mixer_private_ioctl), GFP_KERNEL);
if (ctl == NULL)
return -ENOMEM;
int ret = 0;
struct hal2_card *hal2;
- hal2 = (struct hal2_card *) kmalloc(sizeof(struct hal2_card), GFP_KERNEL);
+ hal2 = kmalloc(sizeof(struct hal2_card), GFP_KERNEL);
if (!hal2)
return -ENOMEM;
memset(hal2, 0, sizeof(struct hal2_card));
devc->capabilities |= MPU_CAP_INTLG; /* Supports intelligent mode */
- mpu401_synth_operations[m] = (struct synth_operations *)kmalloc(sizeof(struct synth_operations), GFP_KERNEL);
+ mpu401_synth_operations[m] = kmalloc(sizeof(struct synth_operations), GFP_KERNEL);
if (mpu401_synth_operations[m] == NULL)
{
static ssize_t dev_read(struct file *file, char __user *buf, size_t count, loff_t *off)
{
- int minor = iminor(file->f_dentry->d_inode);
+ int minor = iminor(file->f_path.dentry->d_inode);
if (minor == dev.dsp_minor)
return dsp_read(buf, count);
else
static ssize_t dev_write(struct file *file, const char __user *buf, size_t count, loff_t *off)
{
- int minor = iminor(file->f_dentry->d_inode);
+ int minor = iminor(file->f_path.dentry->d_inode);
if (minor == dev.dsp_minor)
return dsp_write(buf, count);
else
return 0;
}
- devc = (struct opl_devinfo *)kmalloc(sizeof(*devc), GFP_KERNEL);
+ devc = kmalloc(sizeof(*devc), GFP_KERNEL);
if (devc == NULL)
{
*/
- detected_devc = (sb_devc *)kmalloc(sizeof(sb_devc), GFP_KERNEL);
+ detected_devc = kmalloc(sizeof(sb_devc), GFP_KERNEL);
if (detected_devc == NULL)
{
printk(KERN_ERR "sb: Can't allocate memory for device information\n");
return;
}
std_midi_synth.midi_dev = devc->my_mididev = dev;
- midi_devs[dev] = (struct midi_operations *)kmalloc(sizeof(struct midi_operations), GFP_KERNEL);
+ midi_devs[dev] = kmalloc(sizeof(struct midi_operations), GFP_KERNEL);
if (midi_devs[dev] == NULL)
{
printk(KERN_WARNING "Sound Blaster: failed to allocate MIDI memory.\n");
midi_devs[dev]->devc = devc;
- midi_devs[dev]->converter = (struct synth_operations *)kmalloc(sizeof(struct synth_operations), GFP_KERNEL);
+ midi_devs[dev]->converter = kmalloc(sizeof(struct synth_operations), GFP_KERNEL);
if (midi_devs[dev]->converter == NULL)
{
printk(KERN_WARNING "Sound Blaster: failed to allocate MIDI memory.\n");
if (m == -1)
return 0;
- mixer_devs[m] = (struct mixer_operations *)kmalloc(sizeof(struct mixer_operations), GFP_KERNEL);
+ mixer_devs[m] = kmalloc(sizeof(struct mixer_operations), GFP_KERNEL);
if (mixer_devs[m] == NULL)
{
printk(KERN_ERR "sb_mixer: Can't allocate memory\n");
static ssize_t sound_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
- int dev = iminor(file->f_dentry->d_inode);
+ int dev = iminor(file->f_path.dentry->d_inode);
int ret = -EINVAL;
/*
static ssize_t sound_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
- int dev = iminor(file->f_dentry->d_inode);
+ int dev = iminor(file->f_path.dentry->d_inode);
int ret = -EINVAL;
lock_kernel();
static unsigned int sound_poll(struct file *file, poll_table * wait)
{
- struct inode *inode = file->f_dentry->d_inode;
+ struct inode *inode = file->f_path.dentry->d_inode;
int dev = iminor(inode);
DEB(printk("sound_poll(dev=%d)\n", dev));
int dev_class;
unsigned long size;
struct dma_buffparms *dmap = NULL;
- int dev = iminor(file->f_dentry->d_inode);
+ int dev = iminor(file->f_path.dentry->d_inode);
dev_class = dev & 0x0f;
dev >>= 4;
return;
}
- m=(struct vmidi_memory *)kmalloc(sizeof(struct vmidi_memory), GFP_KERNEL);
+ m = kmalloc(sizeof(struct vmidi_memory), GFP_KERNEL);
if (m == NULL)
{
printk(KERN_WARNING "Loopback MIDI: Failed to allocate memory\n");
conf_printf2(dev_name, devc->hw.io_base, devc->hw.irq,
devc->hw.dma, devc->hw.dma2);
- portc = (wavnc_port_info *)kmalloc(sizeof(wavnc_port_info), GFP_KERNEL);
+ portc = kmalloc(sizeof(wavnc_port_info), GFP_KERNEL);
if (portc == NULL)
goto nomem;
endif
snd-ak4531-codec-objs := ak4531_codec.o
-snd-ac97-bus-objs := ac97_bus.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AC97_CODEC) += snd-ac97-codec.o
obj-$(CONFIG_SND_ENS1370) += snd-ak4531-codec.o
-obj-$(CONFIG_SND_AC97_BUS) += snd-ac97-bus.o
obj-m := $(sort $(obj-m))
printk(KERN_INFO "Unable to load '%s'.\n", fn);
return 0;
}
- l = filp->f_dentry->d_inode->i_size;
+ l = filp->f_path.dentry->d_inode->i_size;
if (l <= 0 || l > 131072)
{
printk(KERN_INFO "Invalid firmware '%s'\n", fn);
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff