--- /dev/null
+@c each section should have index entries corresponding to the section title
+
+@node Name Service Switch
+@chapter System Databases and Name Service Switch
+
+Various functions in the C Library need to be configured to work
+correctly in the local environment. Traditionally, this was done by
+using files (e.g., @file{/etc/passwd}), but other nameservices (line the
+Network Information Service (NIS) and the Domain Name Service (DNS))
+became popular, and were hacked into the C library, usually with a fixed
+search order @pxref{frobnicate, frobnicate, ,jargon}.
+
+The GNU C Library contains a cleaner solution of this problem. It is
+designed after a method used by Sun Microsystems in the C library of
+@w{Solaris 2}. GNU C Library follows their name and calls this
+scheme @dfn{Name Service Switch} (NSS).
+
+Though the interface might be similar to Sun's version there is no
+common code. We never saw any source code of Sun's implementation and
+so the internal interface are incompatible. This is also manifest in the
+file names we use as we will see later.
+
+
+@menu
+* NSS Basics:: What is this NSS good for.
+* NSS Configuration File:: Configuring NSS.
+* NSS Module Internals:: How does it work internally.
+* Extending NSS:: What to do to add services or databases.
+@end menu
+
+@node NSS Basics, NSS Configuration File, Name Service Switch, Name Service Switch
+@section NSS Basics
+
+The basic idea is to put the implementation of the different services
+offered to access the databases in separate modules. This has some
+advantages:
+
+@enumerate
+@item
+Contributors can add new services without adding them to GNU C Library.
+@item
+The modules can be updated separately.
+@item
+The C library image is smaller.
+@end enumerate
+
+To fulfill the first goal above the ABI of the modules will be described
+below. For getting the implementation of a new service right it is
+important to understand how the functions in the modules get called.
+They are in no way designed to be used by the programmer directly.
+Instead the programmer should only use the documented and standardized
+functions to access the databases.
+
+@noindent
+The databases available in the NSS are
+
+@cindex ethers
+@cindex group
+@cindex hosts
+@cindex network
+@cindex protocols
+@cindex passwd
+@cindex rpc
+@cindex services
+@cindex shadow
+@vtable @code
+@item ethers
+Ethernet numbers,
+@comment @pxref{Ethernet Numbers}.
+@item group
+Groups of users, @pxref{Group Database}.
+@item hosts
+Host names and numbers, @pxref{Host Names}.
+@item network
+Network names and numbers, @pxref{Networks Database}.
+@item protocols
+Network protocols, @pxref{Protocols Database}.
+@item passwd
+User passwords, @pxref{User Database}.
+@item rpc
+Remote procedure call names and numbers,
+@comment @pxref{RPC Database}.
+@item services
+Network services, @pxref{Services Database}.
+@item shadow
+Shadow user passwords,
+@comment @pxref{Shadow Password Database}.
+@end vtable
+
+@noindent
+There will be some more added later (@code{aliases}, @code{automount},
+@code{bootparams}, @code{netgroup}, @code{netmasks}, and
+@code{publickey}).
+
+@node NSS Configuration File, NSS Module Internals, NSS Basics, Name Service Switch
+@section The NSS Configuration File
+
+@cindex @file{/etc/nsswitch.conf}
+@cindex @file{nsswitch.conf}
+Somehow the NSS code must be told about the wishes of the user. For
+this reason there is the file @file{/etc/nsswitch.conf}. For each
+database this file contain a specification how the lookup process should
+work. The file could look like this:
+
+@example
+@include nsswitch.texi
+@end example
+
+The first column is the database as you can guess from the table above.
+The rest of the line specifies how the lookup process works. Please
+note that you specify the way it works for each database individually.
+This cannot be done with the old way of a monolithic implementation.
+
+The configuration specification for each database can contain two
+different items:
+
+@itemize @bullet
+@item
+the service specification like @code{files}, @code{db}, or @code{nis}.
+@item
+the reaction on lookup result line @code{[NOTFOUND=return]}.
+@end itemize
+
+@menu
+* Services in the NSS configuration:: Service names in the NSS configuratin.
+* Actions in the NSS configuration:: React approprite on the lookup result.
+* Notes on NSS Configuration File:: Things to take care about while
+ configuring NSS.
+@end menu
+
+@node Services in the NSS configuration, Actions in the NSS configuration, NSS Configuration File, NSS Configuration File
+@subsection Services in the NSS configuration File
+
+The above example file mentions four different services: @code{files},
+@code{db}, @code{nis}, and @code{nisplus}. This does not mean these
+services are available on all sites and it does also not mean these are
+all the services which will ever be available.
+
+In fact, these names are simply strings which the NSS code uses to find
+the implicitly addressed functions. The internal interface will be
+described later. Visible to the user are the modules which implement an
+individual service.
+
+Assume the service @var{name} shall be used for a lookup. The code for
+this service is implemented in a module called @file{libnss_@var{name}}.
+On a system supporting shared libraries this is in fact a shared library
+with the name (for example) @file{libnss_@var{name}.so.1}. The number
+at the end is the currently used version of the interface which will not
+change frequently. Normally the user should not have to be cognizant of
+these files since they should be placed in a directory where they are
+found automatically. Only the names of all available services are
+important.
+
+@node Actions in the NSS configuration, Notes on NSS Configuration File, Services in the NSS configuration, NSS Configuration File
+@subsection Actions in the NSS configuration
+
+The second item in the specification gives the user much finer control
+on the lookup process. Action items are placed between two service
+names and are written within brackets. The general form is
+
+@smallexample
+[ @r{(}!@r{?} @var{status} = @var{action}@r{)+} ]
+@end smallexample
+
+@noindent
+where
+
+@smallexample
+@var{status} @result{} success | notfound | unavail | tryagain
+@var{action} @result{} return | continue
+@end smallexample
+
+The case of the keywords is insignificant. The @var{status}
+values are the results of a call to a lookup function of a specific
+service. They mean
+
+@ftable @samp
+@item success
+No error occured an the wanted entry is returned. The default action
+for this is @code{return}.
+
+@item notfound
+The lookup process works ok but the needed value was not found. The
+default action is @code{continue}.
+
+@item unavail
+@cindex DNS server unavailable
+The service is permanently unavailable. This can either mean the needed
+file is not available, or, for DNS, the server is not available or does
+not allow queries. The default action is @code{continue}.
+
+@item tryagain
+The service is temporarily unavailable. This could mean a file is
+locked or a server currently cannot accept more connections. The
+default action is @code{continue}.
+@end ftable
+
+@noindent
+If we have a line like
+
+@smallexample
+ethers: nisplus [NOTFOUND=return] db files
+@end smallexample
+
+@noindent
+this is equivalent to
+
+@smallexample
+ethers: nisplus [SUCCESS=return NOTFOUND=return UNAVAIL=continue
+ TRYAGAIN=continue]
+ db [SUCCESS=return NOTFOUND=continue UNAVAIL=continue
+ TRYAGAIN=continue]
+ files
+@end smallexample
+
+@noindent
+(except that it would have to be written on one line). The default
+value for the actions are normally what you want, and only need to be
+changed in exceptional cases.
+
+If the optional @code{!} is placed before the @var{status} this means
+the following action is used for all statii but @var{status} itself.
+I.e., @code{!} is negation as in the C language (and others).
+
+Before we explain the exception which makes this action item necessary
+one more remark: obviously it makes no sense to add another action
+item after the @code{files} service. Since there is no other service
+following the action @emph{always} is @code{return}.
+
+@cindex nisplus, and completeness
+Now, why is this @code{[NOTFOUND=return]} action useful? To understand
+this we should know that the @code{nisplus} service is often
+complete; i.e., if an entry is not available in the NIS+ tables it is
+not available anywhere else. This is what is expressed by this action
+item: it is useless to examine further services since they will not give
+us a result.
+
+@cindex nisplus, and booting
+@cindex bootstrapping, and services
+The situation would be different if the NIS+ service is not available
+because the machine is booting. In this case the return value of the
+lookup function is not @code{notfound} but instead @code{unavail}. And
+as you can see in the complete form above: in this situation the
+@code{db} and @code{files} services are used. Neat, isn't it? The
+system administrator need not pay special care for the time the system
+is not completely ready to work (while booting or shutdown or
+network problems).
+
+
+@node Notes on NSS Configuration File, , Actions in the NSS configuration, NSS Configuration File
+@subsection Notes on the NSS Configuration File
+
+Finally a few more hints. The NSS implementation is not completely
+helpless if @file{/etc/nsswitch.conf} does not exist. For
+all supported databases there is a default value so it should normally
+be possible to get the system running even if the file is corrupted or
+missing.
+
+A second point is that the user should try to optimize the lookup
+process. The different service have different response times. A simple
+file look up on a local file could be fast, but if the file is long and the
+needed entry is near the end of the file this may take quite some time.
+In this case it might be better to use the @code{db} service which
+allows fast local access to large data sets.
+
+Often the situation is that some global information like NIS must be
+used. So it is unavoidable to use service entries like @code{nis} etc.
+But one should avoid slow services like this if possible.
+
+
+@node NSS Module Internals, Extending NSS, NSS Configuration File, Name Service Switch
+@section NSS Module Internals
+
+Now it is time to described how the modules look like. The functions
+contained in a module are identified by their names. I.e., there is no
+jump table or the like. How this is done is of no interest here; those
+interested in this topic should read about Dynamic Linking.
+@comment @ref{Dynamic Linking}.
+
+
+@menu
+* NSS Module Names:: Construction of the interface function of
+ the NSS modules.
+* NSS Modules Interface:: Programming interface in the NSS module
+ functions.
+@end menu
+
+@node NSS Module Names, NSS Modules Interface, NSS Module Internals, NSS Module Internals
+@subsection The Naming Scheme of the NSS Modules
+
+@noindent
+The name of each function consist of various parts:
+
+@quotation
+ _nss_@var{service}_@var{function}
+@end quotation
+
+@var{service} of course corresponds to the name of the module this
+function is found in.@footnote{Now you might ask why to duplicate this
+information. The answer is that we want to keep the possibility to link
+directly with these shared objects.} The @var{function} part is derived
+from the interface function in the C library itself. If the user calls
+the function @code{gethostbyname} and the service used is @code{files}
+the function
+
+@smallexample
+ _nss_files_gethostbyname_r
+@end smallexample
+
+@noindent
+in the module
+
+@smallexample
+ libnss_files.so.1
+@end smallexample
+
+@noindent
+@cindex reentrant NSS functions
+is used. You see, what is explained above in not the whole truth. In
+fact the NSS modules only contain reentrant versions of the lookup
+functions. I.e., if the user would call the @code{gethostbyname_r}
+function this also would end in the above function. For all user
+interface functions the C library maps this call to a call to the
+reentrant function. For reentrant functions this is trivial since the
+interface is (nearly) the same. For the non-reentrant version pointers
+to static buffers are used to replace the user supplied buffers.
+
+I.e., the reentrant functions @emph{can} have counterparts. No service
+module is forced to have functions for all databases and all kinds to
+access them. If a function is not available it is simply treated as if
+the function would return @code{unavail}
+(@pxref{Actions in the NSS configuration}).
+
+
+@node NSS Modules Interface, , NSS Module Names, NSS Module Internals
+@subsection The Interface of the Function in NSS Modules
+
+Now we know about the functions contained in the modules. It is now
+time to describe the types. When we mentioned the reentrant versions of
+the functions above, this means there are some additional arguments
+(compared with the standard, non-reentrant version). The prototypes for
+the non-reentrant and reentrant versions of our function above are:
+
+@smallexample
+struct hostent *gethostbyname (const char *name)
+
+struct hostent *gethostbyname_r (const char *name,
+ struct hostent *result_buf, char *buf,
+ int buflen, int *h_errnop)
+@end smallexample
+
+@noindent
+The actual prototype of the function is the NSS modules in this case is
+
+@smallexample
+int _nss_files_gethostbyname_r (const char *name,
+ struct hostent *result_buf, char *buf,
+ int buflen, int *h_errnop)
+@end smallexample
+
+I.e., the interface function is in fact the reentrant function with
+the change of the return value. While the user-level function returns a
+pointer to the result the reentrant function return an @code{int} value:
+
+@cindex NSS_STATUS_TRYAGAIN
+@cindex NSS_STATUS_UNAVAIL
+@cindex NSS_STATUS_NOTFOUND
+@cindex NSS_STATUS_SUCCESS
+@ftable @code
+@item NSS_STATUS_TRYAGAIN
+numeric value @code{-2}
+
+@item NSS_STATUS_UNAVAIL
+numeric value @code{-1}
+
+@item NSS_STATUS_NOTFOUND
+numeric value @code{0}
+
+@item NSS_STATUS_SUCCESS
+numeric value @code{1}
+@end ftable
+
+@noindent
+Now you see where the action items of the @file{/etc/nsswitch.conf} file
+are used.
+
+The above function has somthing special which is missing for almost all
+the other module functions. There is an argument @var{h_errnop}. This
+points to a variable which will be filled with the error code in case
+the execution of the function fails for some reason. The reentrant
+function cannot use the global variable @var{h_errno};
+@code{gethostbyname} calls @code{gethostbyname_r} with the
+last argument set to @code{&h_errno}.
+
+The @code{get@var{XXX}by@var{YYY}} functions are the most important
+functions in the NSS modules. But there are others which implement
+the other ways to access system databases (say for the
+password database, there are @code{setpwent}, @code{getpwent}, and
+@code{endpwent}). These will be described in more detail later.
+Here we give a general way to determine the
+signature of the module function:
+
+@itemize @bullet
+@item
+the return value is @code{int};
+@item
+the name is as explain in @pxref{NSS Module Names};
+@item
+the first arguments are identical to the arguments of the non-reentrant
+function;
+@item
+the next three arguments are:
+
+@table @code
+@item STRUCT_TYPE result_buf
+pointer to buffer where the result is stored. @code{STRUCT_TYPE} is
+normally a struct which corresponds to the database.
+@item char *buffer
+pointer to a buffer where the function can store additional adata for
+the result etc.
+@item int buflen
+length of the buffer pointed to by @var{buffer}.
+@end table
+
+@item
+possibly a last argument @var{h_errnop}, for the host name and network
+name lookup functions.
+@end itemize
+
+@noindent
+This table is correct for all functions but the @code{set@dots{}ent}
+and @code{end@dots{}ent} functions.
+
+
+@node Extending NSS, , NSS Module Internals, Name Service Switch
+@section Extending NSS
+
+One of the advantages of NSS mentioned above is that it can be extended
+quite easily. There are two ways in which the extension can happen:
+adding another database or adding another service. The former is
+normally done only by the C library developers. It is
+here only important to remember that adding another database is
+independent from adding another service because a service need not
+support all databases or lookup functions.
+
+A designer/implementor of a new service is therefore free to choose the
+databases s/he is interested in and leave the rest for later (or
+completely aside).
+
+@menu
+* Adding another Service to NSS:: What is to do to add a new service.
+* NSS Module Function Internals:: Guidelines for writing new NSS
+ service functions.
+@end menu
+
+@node Adding another Service to NSS, NSS Module Function Internals, Extending NSS, Extending NSS
+@subsection Adding another Service to NSS
+
+The sources for a new service need not (and should not) be part of the
+GNU C Library itself. The developer retains complete control over the
+sources and its development. The links between the C library and the
+new service module consists solely of the interface functions.
+
+Each module is designed following a specific interface specification.
+For now the version is 1 and this manifests in the version number of the
+shared library object of the NSS modules: they have the extension
+@code{.1}. If the interface ever changes in an incompatible way,
+this number will be increased---hopefully this will never be necessary.
+Modules using the old interface will still be usable.
+
+Developers of a new service will have to make sure that their module is
+created using the correct interface number. This means the file itself
+must have the correct name and on ElF systems the @dfn{soname} (Shared
+Object Name) must also have this number. Building a module from a bunch
+of object files on an ELF system using GNU CC could be done like this:
+
+@smallexample
+gcc -shared -o libnss_NAME.so.1 -Wl,-soname,libnss_NAME.so.1 OBJECTS
+@end smallexample
+
+@noindent
+@ref{Link Options, Options for Linking, , gcc, GNU CC}, to learn
+more about this command line.
+
+To use the new module the library must be able to find it. This can be
+achieved by using options for the dynamic linker so that it will search
+directory where the binary is placed. For an ELF system this could be
+done by adding the wanted directory to the value of
+@code{LD_LIBRARY_PATH}.
+
+But this is not always possible since some program (those which run
+under IDs which do not belong to the user) ignore this variable.
+Therefore the stable version of the module should be placed into a
+directory which is searched by the dynamic linker. Normally this should
+be the directory @file{$prefix/lib}, where @file{$prefix} corresponds to
+the value given to configure using the @code{--prefix} option. But be
+careful: this should only be done if it is clear the module does not
+cause any harm. System administrators should be careful.
+
+
+@node NSS Module Function Internals, , Adding another Service to NSS, Extending NSS
+@subsection Internals of the NSS Module Functions
+
+Until now we only provided the syntactic interface for the functions in
+the NSS module. In fact there is not more much we can tell since the
+implementation obviously is different for each function. But a few
+general rules must be followed by all functions.
+
+In fact there are four kinds of different functions which may appear in
+the interface. All derive from the traditional ones for system databases.
+@var{db} in the following table is normally an abbreviation for the
+database (e.g., it is @code{pw} for the password database).
+
+@table @code
+@item int _nss_@var{database}_set@var{db}ent (void)
+This function prepares the service for following operations. For a
+simple file based lookup this means files could be opened, for other
+services this function simply is a noop.
+
+One special case for this function is that it takes an additional
+argument for some @var{database}s (i.e., the interface is
+@code{int set@var{db}ent (int)}). @ref{Host Names}, which describes the
+@code{sethostent} function.
+
+The return value should be @var{NSS_STATUS_SUCCESS} or according to the
+table above in case of an error (@pxref{NSS Modules Interface}).
+
+@item int _nss_@var{database}_end@var{db}ent (void)
+This function simply closes all files which are still open or removes
+buffer caches. If there are no files or buffers to remove this is again
+a simple noop.
+
+There normally is no return value different to @var{NSS_STATUS_SUCCESS}.
+
+@item int _nss_@var{database}_get@var{db}ent_r (@var{STRUCTURE} *result, char *buffer, int buflen)
+Since this function will be called several times in a row to retrieve
+one entry after the other it must keep some kind of state. But this
+also means the functions are not really reentrant. They are reentrant
+only in that simultaneous calls to this function will not try to
+write the retrieved data in the same place (as it would be the case for
+the non-reentrant functions); instead, it writes to the structure
+pointed to by the @var{result} parameter. But the calls share a common
+state and in the case of a file access this means they return neighboring
+entries in the file.
+
+The buffer of length @var{buflen} pointed to by @var{buffer} can be used
+for storing some additional data for the result. It is @emph{not}
+guaranteed that the same buffer will be passed for the next call of this
+function. Therefore one must not misuse this buffer to save some state
+information from one call to another.
+
+As explained above this function could also have an additional last
+argument. This depends on the database used; it happens only for
+@code{host} and @code{network}.
+
+The function shall return @code{NSS_STATUS_SUCCESS} as long as their are
+more entries. When the last entry was read it should return
+@code{NSS_STATUS_NOTFOUND}. When the buffer given as an argument is too
+small for the data to be returned @code{NSS_STATUS_TRYAGAIN} should be
+returned. When the service was not formerly initialized by a call to
+@code{_nss_@var{DATABASE}_set@var{db}ent} all return value allowed for
+this function can also be returned here.
+
+@item int _nss_@var{DATABASE}_get@var{db}by@var{XX}_r (@var{PARAMS}, @var{STRUCTURE} *result, char *buffer, int buflen)
+This function shall return the entry from the database which is
+addressed by the @var{PARAMS}. The type and number of these arguments
+vary. It must be individually determined by looking to the user-level
+interface functions. All arguments given to the non-reentrant version
+are here described by @var{PARAMS}.
+
+The result must be stored in the structure pointed to by @var{result}.
+If there is additional data to return (say strings, where the
+@var{result} structure only contains pointers) the function must use the
+@var{buffer} or length @var{buflen}. There must not be any references
+to non-constant global data.
+
+The implementation of this function should honour the @var{stayopen}
+flag set by the @code{set@var{DB}ent} function whenever this makes sense.
+
+Again, this function takes an additional last argument for the
+@code{host} and @code{network} database.
+
+The return value should as always follow the rules given above
+(@pxref{NSS Modules Interface}).
+
+@end table
-# GNU libc message catalog of translations
-# Copyright (C) 1996 Free Software Foundation, Inc.
-# Automatically generated; contact <bug-glibc@prep.ai.mit.edu>
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
-"Project-Id-Version: libc 1.90\n"
-"PO-Revision-Date: 1996-05-29 14:03\n"
-"Last-Translator: GNU libc maintainers <bug-glibc@prep.ai.mit.edu>\n"
+"Project-Id-Version: libc 1.93\n"
+"POT-Creation-Date: 1996-08-14 18:02\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+DIST\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8-bit\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: ENCODING\n"
#: sunrpc/rpc_main.c:80
#, c-format
msgid " program vers proto port\n"
msgstr ""
-#: time/zic.c:423
+#: time/zic.c:425
#, c-format
msgid " (rule from \"%s\", line %d)"
msgstr ""
-#: time/zic.c:420
+#: locale/programs/ld-collate.c:360 programs/ld-ctype.c:1233
+msgid " done\n"
+msgstr ""
+
+#: time/zic.c:422
#, c-format
msgid "\"%s\", line %d: %s"
msgstr ""
-#: time/zic.c:908
+#: time/zic.c:946
#, c-format
msgid "\"Zone %s\" line and -l option are mutually exclusive"
msgstr ""
-#: time/zic.c:916
+#: time/zic.c:954
#, c-format
msgid "\"Zone %s\" line and -p option are mutually exclusive"
msgstr ""
-#: time/zic.c:721
+#: time/zic.c:759
#, c-format
msgid "%s in ruleless zone"
msgstr ""
msgid "%s, line %d: "
msgstr ""
-#: time/zic.c:2035
+#: time/zic.c:2140
#, c-format
msgid "%s: %d did not sign extend correctly\n"
msgstr ""
-#: time/zic.c:1339
+#: locale/programs/charmap.c:176
+#, c-format
+msgid "%s: <mb_cur_max> must be greater than <mb_cur_min>\n"
+msgstr ""
+
+#: time/zic.c:1431
#, c-format
msgid "%s: Can't create %s: %s\n"
msgstr ""
-#: time/zic.c:2014
+#: time/zic.c:2119
#, c-format
msgid "%s: Can't create directory %s: %s\n"
msgstr ""
-#: time/zic.c:600
+#: time/zic.c:613
#, c-format
msgid "%s: Can't link from %s to %s: %s\n"
msgstr ""
-#: time/zic.c:746
+#: time/zic.c:784
#, c-format
msgid "%s: Can't open %s: %s\n"
msgstr ""
-#: time/zic.c:814
+#: time/zic.c:852
#, c-format
msgid "%s: Error closing %s: %s\n"
msgstr ""
-#: time/zic.c:808
+#: time/zic.c:846
#, c-format
msgid "%s: Error reading %s\n"
msgstr ""
-#: time/zic.c:1404
+#: time/zic.c:1495
#, c-format
msgid "%s: Error writing %s\n"
msgstr ""
-#: time/zdump.c:257
+#: time/zdump.c:258
#, c-format
msgid "%s: Error writing standard output "
msgstr ""
-#: time/zic.c:793
+#: time/zic.c:831
#, c-format
msgid "%s: Leap line in non leap seconds file %s\n"
msgstr ""
-#: time/zic.c:360
+#: time/zic.c:362
#, c-format
msgid "%s: Memory exhausted: %s\n"
msgstr ""
-#: time/zic.c:515
+#: time/zic.c:528
#, c-format
msgid "%s: More than one -L option specified\n"
msgstr ""
-#: time/zic.c:475
+#: time/zic.c:488
#, c-format
msgid "%s: More than one -d option specified\n"
msgstr ""
-#: time/zic.c:485
+#: time/zic.c:498
#, c-format
msgid "%s: More than one -l option specified\n"
msgstr ""
-#: time/zic.c:495
+#: time/zic.c:508
#, c-format
msgid "%s: More than one -p option specified\n"
msgstr ""
-#: time/zic.c:505
+#: time/zic.c:518
#, c-format
msgid "%s: More than one -y option specified\n"
msgstr ""
-#: posix/getconf.c:149
+#: time/zic.c:1846
#, c-format
-msgid "%s: Unrecognized variable `%s'\n"
+msgid "%s: command was '%s', result was %d\n"
msgstr ""
-#: time/zic.c:1741
+#: locale/programs/charmap.c:593 programs/locfile.c:878
#, c-format
-msgid "%s: command was '%s', result was %d\n"
+msgid "%s: error in state machine"
msgstr ""
#: posix/getopt.c:686
msgid "%s: output would overwrite %s\n"
msgstr ""
-#: time/zic.c:800 zic.c:1212 zic.c:1232
+#: time/zic.c:838 zic.c:1249 zic.c:1269
#, c-format
msgid "%s: panic: Invalid l_value %d\n"
msgstr ""
+#: locale/programs/charmap.c:600
+#, c-format
+msgid "%s: premature end of file"
+msgstr ""
+
#: sunrpc/rpc_main.c:152
#, c-format
msgid "%s: unable to open "
msgid "%s: unrecognized option `--%s'\n"
msgstr ""
-#: time/zic.c:432
+#: time/zic.c:447
#, c-format
msgid ""
-"%s: usage is %s [ -s ] [ -v ] [ -l localtime ] [ -p posixrules ] [ -d directory ]\n"
+"%s: usage is %s [ -s ] [ -v ] [ -l localtime ] [ -p posixrules ] [ -d "
+"directory ]\n"
"\t[ -L leapseconds ] [ -y yearistype ] [ filename ... ]\n"
msgstr ""
msgid "(unknown)"
msgstr ""
-#: catgets/gencat.c:242
+#: catgets/gencat.c:243
msgid "*standard input*"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:766
+msgid ".lib section in a.out corrupted"
+msgstr ""
+
#: inet/rcmd.c:325
msgid ".rhosts fstat failed"
msgstr ""
msgid "; why = "
msgstr ""
+#: locale/programs/ld-ctype.c:325
+#, c-format
+msgid "<SP> character must not be in class `%s'"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:316
+#, c-format
+msgid "<SP> character not in class `%s'"
+msgstr ""
+
+#. TRANS The experienced user will know what is wrong.
+#. TRANS @c This error code is a joke. Its perror text is part of the joke.
+#. TRANS @c Don't change it.
+#: stdio-common/../sysdeps/gnu/errlist.c:591
msgid "?"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:762
+msgid "Accessing a corrupted shared library"
+msgstr ""
+
+#. TRANS The requested socket address is already in use. @xref{Socket Addresses}.
+#: stdio-common/../sysdeps/gnu/errlist.c:354
msgid "Address already in use"
msgstr ""
-msgid "Address family not supported by protocol family"
+#. TRANS The address family specified for a socket is not supported; it is
+#. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}.
+#: stdio-common/../sysdeps/gnu/errlist.c:349
+msgid "Address family not supported by protocol"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:714
+msgid "Advertise error"
msgstr ""
msgid "Alarm clock"
msgstr ""
+#. TRANS Argument list too long; used when the arguments passed to a new program
+#. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a
+#. TRANS File}) occupy too much memory space. This condition never arises in the
+#. TRANS GNU system.
+#: stdio-common/../sysdeps/gnu/errlist.c:57
msgid "Argument list too long"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:770
+msgid "Attempting to link in too many shared libraries"
+msgstr ""
+
#: sunrpc/clnt_perr.c:276
msgid "Authentication OK"
msgstr ""
+#. TRANS ???
+#: stdio-common/../sysdeps/gnu/errlist.c:549
msgid "Authentication error"
msgstr ""
+#. TRANS Bad address; an invalid pointer was detected.
+#. TRANS In the GNU system, this error never happens; you get a signal instead.
+#: stdio-common/../sysdeps/gnu/errlist.c:102
msgid "Bad address"
msgstr ""
+#. TRANS Bad file descriptor; for example, I/O on a descriptor that has been
+#. TRANS closed or reading from a descriptor open only for writing (or vice
+#. TRANS versa).
+#: stdio-common/../sysdeps/gnu/errlist.c:70
msgid "Bad file descriptor"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:682
+msgid "Bad font file format"
+msgstr ""
+
+#. TRANS A file that isn't a block special file was given in a situation that
+#. TRANS requires one. For example, trying to mount an ordinary file as a file
+#. TRANS system in Unix gives this error.
+#: stdio-common/../sysdeps/gnu/errlist.c:109
msgid "Block device required"
msgstr ""
-#: sunrpc/pmap_rmt.c:336
+#: sunrpc/pmap_rmt.c:335
msgid "Broadcast select problem"
msgstr ""
+#. TRANS Broken pipe; there is no process reading from the other end of a pipe.
+#. TRANS Every library function that returns this error code also generates a
+#. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled
+#. TRANS or blocked. Thus, your program will never actually see @code{EPIPE}
+#. TRANS unless it has handled or blocked @code{SIGPIPE}.
+#: stdio-common/../sysdeps/gnu/errlist.c:222
msgid "Broken pipe"
msgstr ""
msgid "CPU time limit exceeded"
msgstr ""
-msgid "Can't assign requested address"
+#: stdio-common/../sysdeps/gnu/errlist.c:758
+msgid "Can not access a needed shared library"
msgstr ""
-msgid "Can't send after socket shutdown"
+#. TRANS No memory available. The system cannot allocate more virtual memory
+#. TRANS because its capacity is full.
+#: stdio-common/../sysdeps/gnu/errlist.c:91
+msgid "Cannot allocate memory"
msgstr ""
-msgid "Cannot allocate memory"
+#. TRANS The requested socket address is not available; for example, you tried
+#. TRANS to give a socket a name that doesn't match the local host name.
+#. TRANS @xref{Socket Addresses}.
+#: stdio-common/../sysdeps/gnu/errlist.c:361
+msgid "Cannot assign requested address"
msgstr ""
-#: sunrpc/pmap_rmt.c:254
+#: sunrpc/pmap_rmt.c:253
msgid "Cannot create socket for broadcast rpc"
msgstr ""
-#: sunrpc/pmap_rmt.c:348
+#: stdio-common/../sysdeps/gnu/errlist.c:774
+msgid "Cannot exec a shared library directly"
+msgstr ""
+
+#: sunrpc/pmap_rmt.c:347
msgid "Cannot receive reply to broadcast"
msgstr ""
msgid "Cannot register service"
msgstr ""
-#: sunrpc/pmap_rmt.c:312
+#. TRANS The socket has already been shut down.
+#: stdio-common/../sysdeps/gnu/errlist.c:422
+msgid "Cannot send after transport endpoint shutdown"
+msgstr ""
+
+#: sunrpc/pmap_rmt.c:311
msgid "Cannot send broadcast packet"
msgstr ""
-#: sunrpc/pmap_rmt.c:260
+#: sunrpc/pmap_rmt.c:259
msgid "Cannot set socket option SO_BROADCAST"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:622
+msgid "Channel number out of range"
+msgstr ""
+
msgid "Child exited"
msgstr ""
msgid "Client credential too weak"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:722
+msgid "Communication error on send"
+msgstr ""
+
+#. TRANS Go home and have a glass of warm, dairy-fresh milk.
+#: stdio-common/../sysdeps/gnu/errlist.c:601
msgid "Computer bought the farm"
msgstr ""
+#: locale/programs/ld-ctype.c:1196
+msgid "Computing table size for character classes might take a while..."
+msgstr ""
+
+#: locale/programs/ld-collate.c:327
+msgid "Computing table size for collation information might take a while..."
+msgstr ""
+
+#. TRANS A remote host refused to allow the network connection (typically because
+#. TRANS it is not running the requested service).
+#: stdio-common/../sysdeps/gnu/errlist.c:439
msgid "Connection refused"
msgstr ""
+#. TRANS A network connection was closed for reasons outside the control of the
+#. TRANS local host, such as by the remote machine rebooting or an unrecoverable
+#. TRANS protocol violation.
+#: stdio-common/../sysdeps/gnu/errlist.c:389
msgid "Connection reset by peer"
msgstr ""
+#. TRANS A socket operation with a specified timeout received no response during
+#. TRANS the timeout period.
+#: stdio-common/../sysdeps/gnu/errlist.c:433
msgid "Connection timed out"
msgstr ""
msgid "Continued"
msgstr ""
+#. TRANS No default destination address was set for the socket. You get this
+#. TRANS error when you try to transmit data over a connectionless socket,
+#. TRANS without first specifying a destination for the data with @code{connect}.
+#: stdio-common/../sysdeps/gnu/errlist.c:417
msgid "Destination address required"
msgstr ""
-msgid "Device busy"
+#: stdio-common/../sysdeps/gnu/errlist.c:686
+msgid "Device not a stream"
msgstr ""
+#. TRANS No such device or address. The system tried to use the device
+#. TRANS represented by a file you specified, and it couldn't find the device.
+#. TRANS This can mean that the device file was installed incorrectly, or that
+#. TRANS the physical device is missing or not correctly attached to the
+#. TRANS computer.
+#: stdio-common/../sysdeps/gnu/errlist.c:49
msgid "Device not configured"
msgstr ""
+#. TRANS Resource busy; a system resource that can't be shared is already in use.
+#. TRANS For example, if you try to delete a file that is the root of a currently
+#. TRANS mounted filesystem, you get this error.
+#: stdio-common/../sysdeps/gnu/errlist.c:116
+msgid "Device or resource busy"
+msgstr ""
+
+#. TRANS Directory not empty, where an empty directory was expected. Typically,
+#. TRANS this error occurs when you are trying to delete a directory.
+#: stdio-common/../sysdeps/gnu/errlist.c:468
msgid "Directory not empty"
msgstr ""
+#. TRANS The user's disk quota was exceeded.
+#: stdio-common/../sysdeps/gnu/errlist.c:486
msgid "Disc quota exceeded"
msgstr ""
msgid "Error in unknown error system: "
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:662
+msgid "Exchange full"
+msgstr ""
+
+#. TRANS Invalid executable file format. This condition is detected by the
+#. TRANS @code{exec} functions; see @ref{Executing a File}.
+#: stdio-common/../sysdeps/gnu/errlist.c:63
msgid "Exec format error"
msgstr ""
msgid "Failed (unspecified error)"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:750
+msgid "File descriptor in bad state"
+msgstr ""
+
+#. TRANS File exists; an existing file was specified in a context where it only
+#. TRANS makes sense to specify a new file.
+#: stdio-common/../sysdeps/gnu/errlist.c:122
msgid "File exists"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:678
+msgid "File locking deadlock error"
+msgstr ""
+
+#. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for
+#. TRANS Files}) or host name too long (in @code{gethostname} or
+#. TRANS @code{sethostname}; @pxref{Host Identification}).
+#: stdio-common/../sysdeps/gnu/errlist.c:452
msgid "File name too long"
msgstr ""
msgid "File size limit exceeded"
msgstr ""
+#. TRANS File too big; the size of a file would be larger than allowed by the system.
+#: stdio-common/../sysdeps/gnu/errlist.c:190
msgid "File too large"
msgstr ""
msgid "Floating point exception"
msgstr ""
+#. TRANS Function not implemented. Some functions have commands or options defined
+#. TRANS that might not be supported in all implementations, and this is the kind
+#. TRANS of error you get if you request them and they are not supported.
+#: stdio-common/../sysdeps/gnu/errlist.c:561
msgid "Function not implemented"
msgstr ""
+#. TRANS This error code has no purpose.
+#: stdio-common/../sysdeps/gnu/errlist.c:606
msgid "Gratuitous error"
msgstr ""
msgid "Hangup"
msgstr ""
+#. TRANS The remote host for a requested network connection is down.
+#: stdio-common/../sysdeps/gnu/errlist.c:457
msgid "Host is down"
msgstr ""
-#: resolv/herror.c:74
+#: resolv/herror.c:75
msgid "Host name lookup failure"
msgstr ""
msgid "IOT trap"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:618
+msgid "Identifier removed"
+msgstr ""
+
msgid "Illegal Instruction"
msgstr ""
+#. TRANS Invalid seek operation (such as on a pipe).
+#: stdio-common/../sysdeps/gnu/errlist.c:201
msgid "Illegal seek"
msgstr ""
+#. TRANS Inappropriate file type or format. The file was the wrong type for the
+#. TRANS operation, or a data file had the wrong format.
+#. TRANS
+#. TRANS On some systems @code{chmod} returns this error if you try to set the
+#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}.
+#: stdio-common/../sysdeps/gnu/errlist.c:544
msgid "Inappropriate file type or format"
msgstr ""
+#. TRANS Inappropriate I/O control operation, such as trying to set terminal
+#. TRANS modes on an ordinary file.
+#: stdio-common/../sysdeps/gnu/errlist.c:176
msgid "Inappropriate ioctl for device"
msgstr ""
+#. TRANS In the GNU system, servers supporting the @code{term} protocol return
+#. TRANS this error for certain operations when the caller is not in the
+#. TRANS foreground process group of the terminal. Users do not usually see this
+#. TRANS error because functions such as @code{read} and @code{write} translate
+#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control},
+#. TRANS for information on process groups and these signals.
+#: stdio-common/../sysdeps/gnu/errlist.c:577
msgid "Inappropriate operation for background process"
msgstr ""
+#. TRANS Input/output error; usually used for physical read or write errors.
+#: stdio-common/../sysdeps/gnu/errlist.c:40
msgid "Input/output error"
msgstr ""
msgid "Interrupt"
msgstr ""
+#. TRANS Interrupted function call; an asynchronous signal occured and prevented
+#. TRANS completion of the call. When this happens, you should try the call
+#. TRANS again.
+#. TRANS
+#. TRANS You can choose to have functions resume after a signal that is handled,
+#. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted
+#. TRANS Primitives}.
+#: stdio-common/../sysdeps/gnu/errlist.c:35
msgid "Interrupted system call"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:610
+msgid "Interrupted system call should be restarted"
+msgstr ""
+
+#. TRANS Invalid argument. This is used to indicate various kinds of problems
+#. TRANS with passing the wrong argument to a library function.
+#: stdio-common/../sysdeps/gnu/errlist.c:152
msgid "Invalid argument"
msgstr ""
msgid "Invalid content of \\{\\}"
msgstr ""
+#. TRANS An attempt to make an improper link across file systems was detected.
+#. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but
+#. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}).
+#: stdio-common/../sysdeps/gnu/errlist.c:129
msgid "Invalid cross-device link"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:654
+msgid "Invalid exchange"
+msgstr ""
+
+#. TRANS While decoding a multibyte character the function came along an invalid
+#. TRANS or an incomplete sequence of bytes or the given wide character is invalid.
+#: stdio-common/../sysdeps/gnu/errlist.c:567
+msgid "Invalid or incomplete multibyte or wide character"
+msgstr ""
+
#: posix/regex.c:953
msgid "Invalid preceding regular expression"
msgstr ""
msgid "Invalid regular expression"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:670
+msgid "Invalid request code"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:658
+msgid "Invalid request descriptor"
+msgstr ""
+
#: sunrpc/clnt_perr.c:288
msgid "Invalid server verifier"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:674
+msgid "Invalid slot"
+msgstr ""
+
+#. TRANS File is a directory; you cannot open a directory for writing,
+#. TRANS or create or remove hard links to it.
+#: stdio-common/../sysdeps/gnu/errlist.c:146
msgid "Is a directory"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:794
+msgid "Is a named type file"
+msgstr ""
+
msgid "Killed"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:650
+msgid "Level 2 halted"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:626
+msgid "Level 2 not synchronized"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:630
+msgid "Level 3 halted"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:634
+msgid "Level 3 reset"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:710
+msgid "Link has been severed"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:638
+msgid "Link number out of range"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:702
+msgid "Machine is not on the network"
+msgstr ""
+
#: posix/regex.c:952
msgid "Memory exhausted"
msgstr ""
+#. TRANS The size of a message sent on a socket was larger than the supported
+#. TRANS maximum size.
+#: stdio-common/../sysdeps/gnu/errlist.c:305
msgid "Message too long"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:730
+msgid "Multihop attempted"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:746
+msgid "Name not unique on network"
+msgstr ""
+
+#. TRANS ???
+#: stdio-common/../sysdeps/gnu/errlist.c:554
msgid "Need authenticator"
msgstr ""
+#. TRANS A network connection was reset because the remote host crashed.
+#: stdio-common/../sysdeps/gnu/errlist.c:377
msgid "Network dropped connection on reset"
msgstr ""
+#. TRANS A socket operation failed because the network was down.
+#: stdio-common/../sysdeps/gnu/errlist.c:366
msgid "Network is down"
msgstr ""
+#. TRANS A socket operation failed because the subnet containing the remote host
+#. TRANS was unreachable.
+#: stdio-common/../sysdeps/gnu/errlist.c:372
msgid "Network is unreachable"
msgstr ""
-#: resolv/herror.c:76
+#: stdio-common/../sysdeps/gnu/errlist.c:646
+msgid "No CSI structure available"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:790
+msgid "No XENIX semaphores available"
+msgstr ""
+
+#: resolv/herror.c:77
msgid "No address associated with name"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:666
+msgid "No anode"
+msgstr ""
+
+#. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this
+#. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the
+#. TRANS other from network operations.
+#: stdio-common/../sysdeps/gnu/errlist.c:396
msgid "No buffer space available"
msgstr ""
+#. TRANS There are no child processes. This error happens on operations that are
+#. TRANS supposed to manipulate child processes, when there aren't any processes
+#. TRANS to manipulate.
+#: stdio-common/../sysdeps/gnu/errlist.c:77
msgid "No child processes"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:690
+msgid "No data available"
+msgstr ""
+
+#. TRANS No locks available. This is used by the file locking facilities; see
+#. TRANS @ref{File Locks}. This error is never generated by the GNU system, but
+#. TRANS it can result from an operation to an NFS server running another
+#. TRANS operating system.
+#: stdio-common/../sysdeps/gnu/errlist.c:535
msgid "No locks available"
msgstr ""
msgid "No match"
msgstr ""
-#: posix/regex.c:5200
+#: stdio-common/../sysdeps/gnu/errlist.c:614
+msgid "No message of desired type"
+msgstr ""
+
+#: posix/regex.c:5202
msgid "No previous regular expression"
msgstr ""
msgid "No remote programs registered.\n"
msgstr ""
+#. TRANS The remote host for a requested network connection is not reachable.
+#: stdio-common/../sysdeps/gnu/errlist.c:462
msgid "No route to host"
msgstr ""
+#. TRANS No space left on device; write operation on a file failed because the
+#. TRANS disk is full.
+#: stdio-common/../sysdeps/gnu/errlist.c:196
msgid "No space left on device"
msgstr ""
+#. TRANS No such file or directory. This is a ``file doesn't exist'' error
+#. TRANS for ordinary files that are referenced in contexts where they are
+#. TRANS expected to already exist.
+#: stdio-common/../sysdeps/gnu/errlist.c:19
msgid "No such file or directory"
msgstr ""
+#. TRANS No process matches the specified process ID.
+#: stdio-common/../sysdeps/gnu/errlist.c:24
msgid "No such process"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:786
+msgid "Not a XENIX named type file"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:738
+msgid "Not a data message"
+msgstr ""
+
+#. TRANS A file that isn't a directory was specified when a directory is required.
+#: stdio-common/../sysdeps/gnu/errlist.c:140
msgid "Not a directory"
msgstr ""
+#. TRANS Domain error; used by mathematical functions when an argument value does
+#. TRANS not fall into the domain over which the function is defined.
+#: stdio-common/../sysdeps/gnu/errlist.c:228
msgid "Numerical argument out of domain"
msgstr ""
+#. TRANS Range error; used by mathematical functions when the result value is
+#. TRANS not representable because of overflow or underflow.
+#: stdio-common/../sysdeps/gnu/errlist.c:234
msgid "Numerical result out of range"
msgstr ""
-#: time/zic.c:1835
+#. TRANS An attempt was made to NFS-mount a remote file system with a file name that
+#. TRANS already specifies an NFS-mounted file.
+#. TRANS (This is an error on some operating systems, but we expect it to work
+#. TRANS properly on the GNU system, making this error code impossible.)
+#: stdio-common/../sysdeps/gnu/errlist.c:502
+msgid "Object is remote"
+msgstr ""
+
+#: time/zic.c:1940
msgid "Odd number of quotation marks"
msgstr ""
+#. TRANS An operation is already in progress on an object that has non-blocking
+#. TRANS mode selected.
+#: stdio-common/../sysdeps/gnu/errlist.c:294
msgid "Operation already in progress"
msgstr ""
+#. TRANS Operation not permitted; only the owner of the file (or other resource)
+#. TRANS or processes with special privileges can perform the operation.
+#: stdio-common/../sysdeps/gnu/errlist.c:12
msgid "Operation not permitted"
msgstr ""
+#. TRANS The operation you requested is not supported. Some socket functions
+#. TRANS don't make sense for all types of sockets, and others may not be
+#. TRANS implemented for all communications protocols. In the GNU system, this
+#. TRANS error can happen for many calls when the object does not support the
+#. TRANS particular operation; it is a generic indication that the server knows
+#. TRANS nothing to do for that call.
+#: stdio-common/../sysdeps/gnu/errlist.c:338
msgid "Operation not supported"
msgstr ""
+#. TRANS The wrong type of device was given to a function that expects a
+#. TRANS particular sort of device.
+#: stdio-common/../sysdeps/gnu/errlist.c:135
msgid "Operation not supported by device"
msgstr ""
+#. TRANS An operation that cannot complete immediately was initiated on an object
+#. TRANS that has non-blocking mode selected. Some functions that must always
+#. TRANS block (such as @code{connect}; @pxref{Connecting}) never return
+#. TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that
+#. TRANS the operation has begun and will take some time. Attempts to manipulate
+#. TRANS the object before the call completes return @code{EALREADY}. You can
+#. TRANS use the @code{select} function to find out when the pending operation
+#. TRANS has completed; @pxref{Waiting for I/O}.
+#: stdio-common/../sysdeps/gnu/errlist.c:288
msgid "Operation now in progress"
msgstr ""
+#. TRANS In the GNU C library, this is another name for @code{EAGAIN} (above).
+#. TRANS The values are always the same, on every operating system.
+#. TRANS
+#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a
+#. TRANS separate error code.
+#: stdio-common/../sysdeps/gnu/errlist.c:276
+msgid "Operation would block"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:698
+msgid "Out of streams resources"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:706
+msgid "Package not installed"
+msgstr ""
+
+#. TRANS Permission denied; the file permissions do not allow the attempted operation.
+#: stdio-common/../sysdeps/gnu/errlist.c:96
msgid "Permission denied"
msgstr ""
msgid "Profiling timer expired"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:642
+msgid "Protocol driver not attached"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:726
+msgid "Protocol error"
+msgstr ""
+
+#. TRANS The socket communications protocol family you requested is not supported.
+#: stdio-common/../sysdeps/gnu/errlist.c:343
msgid "Protocol family not supported"
msgstr ""
+#. TRANS You specified a socket option that doesn't make sense for the
+#. TRANS particular protocol being used by the socket. @xref{Socket Options}.
+#: stdio-common/../sysdeps/gnu/errlist.c:316
msgid "Protocol not available"
msgstr ""
+#. TRANS The socket domain does not support the requested communications protocol
+#. TRANS (perhaps because the requested protocol is completely invalid.)
+#. TRANS @xref{Creating a Socket}.
+#: stdio-common/../sysdeps/gnu/errlist.c:323
msgid "Protocol not supported"
msgstr ""
+#. TRANS The socket type does not support the requested communications protocol.
+#: stdio-common/../sysdeps/gnu/errlist.c:310
msgid "Protocol wrong type for socket"
msgstr ""
msgid "Quit"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:734
+msgid "RFS specific error"
+msgstr ""
+
+#. TRANS ???
+#: stdio-common/../sysdeps/gnu/errlist.c:527
msgid "RPC bad procedure for program"
msgstr ""
+#. TRANS ???
+#: stdio-common/../sysdeps/gnu/errlist.c:517
msgid "RPC program not available"
msgstr ""
+#. TRANS ???
+#: stdio-common/../sysdeps/gnu/errlist.c:522
msgid "RPC program version wrong"
msgstr ""
+#. TRANS ???
+#: stdio-common/../sysdeps/gnu/errlist.c:507
msgid "RPC struct is bad"
msgstr ""
+#. TRANS ???
+#: stdio-common/../sysdeps/gnu/errlist.c:512
msgid "RPC version wrong"
msgstr ""
msgid "RPC: Unknown protocol"
msgstr ""
+#. TRANS An attempt was made to modify something on a read-only file system.
+#: stdio-common/../sysdeps/gnu/errlist.c:206
msgid "Read-only file system"
msgstr ""
msgid "Regular expression too big"
msgstr ""
-msgid "Reserved error 82"
-msgstr ""
-
-msgid "Reserved error 83"
-msgstr ""
-
-msgid "Reserved error 84"
-msgstr ""
-
-msgid "Reserved error 85"
-msgstr ""
-
-msgid "Reserved error 86"
-msgstr ""
-
-msgid "Reserved error 87"
-msgstr ""
-
-msgid "Reserved error 88"
-msgstr ""
-
-msgid "Reserved error 89"
-msgstr ""
-
-msgid "Reserved error 90"
-msgstr ""
-
-msgid "Reserved error 91"
-msgstr ""
-
-msgid "Reserved error 92"
-msgstr ""
-
-msgid "Reserved error 93"
-msgstr ""
-
-msgid "Reserved error 94"
+#: stdio-common/../sysdeps/gnu/errlist.c:798
+msgid "Remote I/O error"
msgstr ""
-msgid "Reserved error 95"
+#: stdio-common/../sysdeps/gnu/errlist.c:754
+msgid "Remote address changed"
msgstr ""
-msgid "Reserved error 96"
-msgstr ""
-
-msgid "Reserved error 97"
-msgstr ""
-
-msgid "Reserved error 98"
-msgstr ""
-
-msgid "Reserved error 99"
-msgstr ""
-
-#: resolv/herror.c:72
+#: resolv/herror.c:73
msgid "Resolver Error 0 (no error)"
msgstr ""
-#: resolv/herror.c:114
+#: resolv/herror.c:115
msgid "Resolver internal error"
msgstr ""
+#. TRANS Deadlock avoided; allocating a system resource would have resulted in a
+#. TRANS deadlock situation. The system does not guarantee that it will notice
+#. TRANS all such situations. This error means you got lucky and the system
+#. TRANS noticed; it might just hang. @xref{File Locks}, for an example.
+#: stdio-common/../sysdeps/gnu/errlist.c:85
msgid "Resource deadlock avoided"
msgstr ""
+#. TRANS Resource temporarily unavailable; the call might work if you try again
+#. TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN};
+#. TRANS they are always the same in the GNU C library.
+#. TRANS
+#. TRANS This error can happen in a few different situations:
+#. TRANS
+#. TRANS @itemize @bullet
+#. TRANS @item
+#. TRANS An operation that would block was attempted on an object that has
+#. TRANS non-blocking mode selected. Trying the same operation again will block
+#. TRANS until some external condition makes it possible to read, write, or
+#. TRANS connect (whatever the operation). You can use @code{select} to find out
+#. TRANS when the operation will be possible; @pxref{Waiting for I/O}.
+#. TRANS
+#. TRANS @strong{Portability Note:} In older Unix many systems, this condition
+#. TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code
+#. TRANS different from @code{EAGAIN}. To make your program portable, you should
+#. TRANS check for both codes and treat them the same.
+#. TRANS
+#. TRANS @item
+#. TRANS A temporary resource shortage made an operation impossible. @code{fork}
+#. TRANS can return this error. It indicates that the shortage is expected to
+#. TRANS pass, so your program can try the call again later and it may succeed.
+#. TRANS It is probably a good idea to delay for a few seconds before trying it
+#. TRANS again, to allow time for other processes to release scarce resources.
+#. TRANS Such shortages are usually fairly serious and affect the whole system,
+#. TRANS so usually an interactive program should report the error to the user
+#. TRANS and return to its command loop.
+#. TRANS @end itemize
+#: stdio-common/../sysdeps/gnu/errlist.c:267
msgid "Resource temporarily unavailable"
msgstr ""
msgid "Server rejected verifier"
msgstr ""
-msgid "Socket is already connected"
-msgstr ""
-
-msgid "Socket is not connected"
-msgstr ""
-
+#. TRANS A file that isn't a socket was specified when a socket is required.
+#: stdio-common/../sysdeps/gnu/errlist.c:299
msgid "Socket operation on non-socket"
msgstr ""
+#. TRANS The socket type is not supported.
+#: stdio-common/../sysdeps/gnu/errlist.c:328
msgid "Socket type not supported"
msgstr ""
+#. TRANS A network connection was aborted locally.
+#: stdio-common/../sysdeps/gnu/errlist.c:382
msgid "Software caused connection abort"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:718
+msgid "Srmount error"
+msgstr ""
+
+#. TRANS Stale NFS file handle. This indicates an internal confusion in the NFS
+#. TRANS system which is due to file system rearrangements on the server host.
+#. TRANS Repairing this condition usually requires unmounting and remounting
+#. TRANS the NFS file system on the local host.
+#: stdio-common/../sysdeps/gnu/errlist.c:494
msgid "Stale NFS file handle"
msgstr ""
msgid "Stopped (tty output)"
msgstr ""
-#: posix/regex.c:940
+#: stdio-common/../sysdeps/gnu/errlist.c:778
+msgid "Streams pipe error"
+msgstr ""
+
+#: stdio-common/../sysdeps/gnu/errlist.c:782
+msgid "Structure needs cleaning"
+msgstr ""
+
+#: posix/regex.c:940 stdio-common/../sysdeps/gnu/errlist.c:7
msgid "Success"
msgstr ""
msgid "Terminated"
msgstr ""
+#. TRANS An attempt to execute a file that is currently open for writing, or
+#. TRANS write to a file that is currently being executed. Often using a
+#. TRANS debugger to run a program is considered having it open for writing and
+#. TRANS will cause this error. (The name stands for ``text file busy''.) This
+#. TRANS is not an error in the GNU system; the text is copied as necessary.
+#: stdio-common/../sysdeps/gnu/errlist.c:185
msgid "Text file busy"
msgstr ""
-msgid "Too many levels of remote in path"
+#: stdio-common/../sysdeps/gnu/errlist.c:694
+msgid "Timer expired"
msgstr ""
+#. TRANS Too many levels of symbolic links were encountered in looking up a file name.
+#. TRANS This often indicates a cycle of symbolic links.
+#: stdio-common/../sysdeps/gnu/errlist.c:445
msgid "Too many levels of symbolic links"
msgstr ""
+#. TRANS Too many links; the link count of a single file would become too large.
+#. TRANS @code{rename} can cause this error if the file being renamed already has
+#. TRANS as many links as it can take (@pxref{Renaming Files}).
+#: stdio-common/../sysdeps/gnu/errlist.c:213
msgid "Too many links"
msgstr ""
+#. TRANS The current process has too many files open and can't open any more.
+#. TRANS Duplicate descriptors do count toward this limit.
+#. TRANS
+#. TRANS In BSD and GNU, the number of open files is controlled by a resource
+#. TRANS limit that can usually be increased. If you get this error, you might
+#. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited;
+#. TRANS @pxref{Limits on Resources}.
+#: stdio-common/../sysdeps/gnu/errlist.c:163
msgid "Too many open files"
msgstr ""
+#. TRANS There are too many distinct file openings in the entire system. Note
+#. TRANS that any number of linked channels count as just one file opening; see
+#. TRANS @ref{Linked Channels}. This error never occurs in the GNU system.
+#: stdio-common/../sysdeps/gnu/errlist.c:170
msgid "Too many open files in system"
msgstr ""
+#. TRANS This means that the per-user limit on new process would be exceeded by
+#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on
+#. TRANS the @code{RLIMIT_NPROC} limit.
+#: stdio-common/../sysdeps/gnu/errlist.c:475
msgid "Too many processes"
msgstr ""
-msgid "Too many references: can't splice"
+#. TRANS ???
+#: stdio-common/../sysdeps/gnu/errlist.c:427
+msgid "Too many references: cannot splice"
msgstr ""
+#. TRANS The file quota system is confused because there are too many users.
+#. TRANS @c This can probably happen in a GNU system when using NFS.
+#: stdio-common/../sysdeps/gnu/errlist.c:481
msgid "Too many users"
msgstr ""
msgid "Trailing backslash"
msgstr ""
+#. TRANS In the GNU system, opening a file returns this error when the file is
+#. TRANS translated by a program and the translator program dies while starting
+#. TRANS up, before it has connected to the file.
+#: stdio-common/../sysdeps/gnu/errlist.c:584
msgid "Translator died"
msgstr ""
-#: catgets/gencat.c:201
+#. TRANS You tried to connect a socket that is already connected.
+#. TRANS @xref{Connecting}.
+#: stdio-common/../sysdeps/gnu/errlist.c:402
+msgid "Transport endpoint is already connected"
+msgstr ""
+
+#. TRANS The socket is not connected to anything. You get this error when you
+#. TRANS try to transmit data over a socket, without first specifying a
+#. TRANS destination for the data. For a connectionless socket (for datagram
+#. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead.
+#: stdio-common/../sysdeps/gnu/errlist.c:410
+msgid "Transport endpoint is not connected"
+msgstr ""
+
+#: catgets/gencat.c:202
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr ""
msgid "Unknown error "
msgstr ""
-#: resolv/herror.c:73
+#: resolv/herror.c:74
msgid "Unknown host"
msgstr ""
-#: resolv/herror.c:117
+#: resolv/herror.c:118
msgid "Unknown resolver error"
msgstr ""
-#: resolv/herror.c:75
+#: resolv/herror.c:76
msgid "Unknown server error"
msgstr ""
msgid "Unmatched \\{"
msgstr ""
+#: posix/getconf.c:184
+#, c-format
+msgid "Unrecognized variable `%s'"
+msgstr ""
+
msgid "Urgent I/O condition"
msgstr ""
-#: catgets/gencat.c:204
+#: catgets/gencat.c:205
#, c-format
msgid ""
"Usage: %s [OPTION]... -o OUTPUT-FILE [INPUT-FILE]...\n"
"is -, output is written to standard output.\n"
msgstr ""
-#: posix/getconf.c:81
+#: posix/getconf.c:131
#, c-format
msgid "Usage: %s variable_name [pathname]\n"
msgstr ""
msgid "User defined signal 2"
msgstr ""
+#: stdio-common/../sysdeps/gnu/errlist.c:742
+msgid "Value too large for defined data type"
+msgstr ""
+
msgid "Virtual timer expired"
msgstr ""
-#: time/zic.c:1740
+#: time/zic.c:1845
msgid "Wild result from command execution"
msgstr ""
msgid "Window changed"
msgstr ""
+#. TRANS You did @strong{what}?
+#: stdio-common/../sysdeps/gnu/errlist.c:596
msgid "You really blew it this time"
msgstr ""
-#: time/zic.c:1013
+#: time/zic.c:1051
msgid "Zone continuation line end time is not after end time of previous line"
msgstr ""
+#: locale/programs/charmap.c:397 programs/locfile.c:341
+#, c-format
+msgid "`%1$s' definition does not end with `END %1$s'"
+msgstr ""
+
+#: locale/programs/ld-monetary.c:358 programs/ld-numeric.c:190
+#, c-format
+msgid "`-1' must be last entry in `%s' field in `%s' category"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1651
+msgid "`...' must only be used in `...' and `UNDEFINED' entries"
+msgstr ""
+
+#: locale/programs/locfile.c:538
+msgid "`from' expected after first argument to `collating-element'"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1108
+msgid ""
+"`from' string in collation element declaration contains unknown character"
+msgstr ""
+
+#: locale/programs/charmap.c:267
+#, c-format
+msgid "argument to <%s> must be a single character"
+msgstr ""
+
+#: locale/programs/locfile.c:215
+#, c-format
+msgid "argument to `%s' must be a single character"
+msgstr ""
+
#: sunrpc/rpc_parse.c:326
msgid "array declaration expected"
msgstr ""
msgid "bad .rhosts owner"
msgstr ""
-#: time/zic.c:1136
+#: locale/programs/charmap.c:212 programs/locfile.c:209
+msgid "bad argument"
+msgstr ""
+
+#: time/zic.c:1173
msgid "blank FROM field on Link line"
msgstr ""
-#: time/zic.c:1140
+#: time/zic.c:1177
msgid "blank TO field on Link line"
msgstr ""
-#: malloc/mcheck.c:174
+#: malloc/mcheck.c:189
msgid "block freed twice"
msgstr ""
-#: malloc/mcheck.c:177
+#: malloc/mcheck.c:192
msgid "bogus mcheck_status, library is buggy"
msgstr ""
msgid "cache_set: victim not found"
msgstr ""
+#: time/zic.c:1686
+msgid "can't determine time zone abbrevation to use just after until time"
+msgstr ""
+
#: sunrpc/svc_simple.c:64
#, c-format
msgid "can't reassign procedure number %d\n"
msgstr ""
-#: catgets/gencat.c:248
+#: locale/programs/ld-collate.c:1313
+#, c-format
+msgid "cannot insert collation element `%.*s'"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1492 programs/ld-collate.c:1497
+msgid "cannot insert into result table"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1165 programs/ld-collate.c:1207
+#, c-format
+msgid "cannot insert new collating symbol definition: %s"
+msgstr ""
+
+#: catgets/gencat.c:249
#, c-format
msgid "cannot open input file `%s'"
msgstr ""
-#: catgets/gencat.c:753 gencat.c:794
+#: catgets/gencat.c:754 gencat.c:795
#, c-format
msgid "cannot open output file `%s'"
msgstr ""
+#: locale/programs/locfile.c:986
+#, c-format
+msgid "cannot open output file `%s' for category `%s'"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1359
+msgid "cannot process order specification"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:264
+#, c-format
+msgid "character %s'%s' in class `%s' must be in class `%s'"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:288
+#, c-format
+msgid "character %s'%s' in class `%s' must not be in class `%s'"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:309
+msgid "character <SP> not defined in character map"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:1140
+#, c-format
+msgid "character `%c' not defined while needed as default value"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:938 locale/programs/ld-ctype.c:1017
+#: locale/programs/ld-ctype.c:1041 locale/programs/ld-ctype.c:1113
+#: programs/ld-ctype.c:1001 programs/ld-ctype.c:1009 programs/ld-ctype.c:1025
+#: programs/ld-ctype.c:1033 programs/ld-ctype.c:1067 programs/ld-ctype.c:1075
+#: programs/ld-ctype.c:1151
+#, c-format
+msgid "character `%s' not defined while needed as default value"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:800
+#, c-format
+msgid "character class `%s' already defined"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:832
+#, c-format
+msgid "character map `%s' already defined"
+msgstr ""
+
+#: locale/programs/charmap.c:76
+#, c-format
+msgid "character map file `%s' not found"
+msgstr ""
+
#: sunrpc/clnt_raw.c:106
msgid "clnt_raw.c - Fatal header serialization error."
msgstr ""
+#: locale/programs/ld-collate.c:1328
+#, c-format
+msgid "collation element `%.*s' appears more than once: ignore line"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1346
+msgid "collation symbol `.*s' appears more than once: ignore line"
+msgstr ""
+
+#: locale/programs/locfile.c:522
+#, c-format
+msgid "collation symbol expected after `%s'"
+msgstr ""
+
#: inet/rcmd.c:112
#, c-format
msgid "connect to address %s: "
msgid "couldn't create an rpc server\n"
msgstr ""
-#: sunrpc/portmap.c:122
+#: sunrpc/portmap.c:121
msgid "couldn't do tcp_create\n"
msgstr ""
-#: sunrpc/portmap.c:100
+#: sunrpc/portmap.c:99
msgid "couldn't do udp_create\n"
msgstr ""
msgid "couldn't register prog %d vers %d\n"
msgstr ""
+#: locale/programs/charmap.c:86
+#, c-format
+msgid "default character map file `%s' not found"
+msgstr ""
+
#: sunrpc/rpc_parse.c:77
msgid "definition keyword expected"
msgstr ""
-#: catgets/gencat.c:367
+#: locale/programs/charset.c:87 programs/charset.c:132
+#, c-format
+msgid "duplicate character name `%s'"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1140
+msgid "duplicate collating element definition"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1286
+#, c-format
+msgid "duplicate definition for character `%.*s'"
+msgstr ""
+
+#: catgets/gencat.c:368
msgid "duplicate set definition"
msgstr ""
-#: time/zic.c:928
+#: time/zic.c:966
#, c-format
msgid "duplicate zone name %s (file \"%s\", line %d)"
msgstr ""
-#: catgets/gencat.c:530
+#: catgets/gencat.c:531
msgid "duplicated message identifier"
msgstr ""
-#: catgets/gencat.c:503
+#: catgets/gencat.c:504
msgid "duplicated message number"
msgstr ""
+#: locale/programs/ld-collate.c:1695
+msgid "empty weight name: line ignored"
+msgstr ""
+
#: sunrpc/svc_udp.c:344
msgid "enablecache: cache already enabled"
msgstr ""
msgid "enablecache: could not allocate cache fifo"
msgstr ""
+#: locale/programs/ld-collate.c:1418
+msgid "end point of ellipsis range is bigger then start"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1148
+msgid "error while inserting collation element into hash table"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1160
+msgid "error while inserting to hash table"
+msgstr ""
+
+#: locale/programs/locfile.c:465
+msgid "expect string argument for `copy'"
+msgstr ""
+
#: sunrpc/rpc_util.c:300
#, c-format
msgid "expected '%s'"
msgid "expected '%s', '%s' or '%s'"
msgstr ""
-#: time/zic.c:819
+#: time/zic.c:857
msgid "expected continuation line not found"
msgstr ""
msgid "expected type specifier"
msgstr ""
+#: locale/programs/locfile.c:1010
+#, c-format
+msgid "failure while writing data for category `%s'"
+msgstr ""
+
+#: locale/programs/ld-monetary.c:154 programs/ld-numeric.c:95
+#, c-format
+msgid "field `%s' in category `%s' not defined"
+msgstr ""
+
+#: locale/programs/ld-messages.c:81 programs/ld-messages.c:102
+#, c-format
+msgid "field `%s' in category `%s' undefined"
+msgstr ""
+
+#: locale/programs/locfile.c:547
+msgid "from-value of `collating-element' must be a string"
+msgstr ""
+
+#: locale/programs/linereader.c:328
+msgid "garbage at end of character code specification"
+msgstr ""
+
+#: locale/programs/linereader.c:214
+msgid "garbage at end of digit"
+msgstr ""
+
#: sunrpc/get_myaddr.c:73
msgid "get_myaddress: ioctl (get interface configuration)"
msgstr ""
-#: time/zic.c:1113
+#: time/zic.c:1150
msgid "illegal CORRECTION field on Leap line"
msgstr ""
-#: time/zic.c:1117
+#: time/zic.c:1154
msgid "illegal Rolling/Stationary field on Leap line"
msgstr ""
+#: locale/programs/ld-collate.c:1766
+msgid "illegal character constant in string"
+msgstr ""
+
#: sunrpc/rpc_scan.c:281
msgid "illegal character in file: "
msgstr ""
+#: locale/programs/ld-collate.c:1115
+msgid "illegal collation element"
+msgstr ""
+
+#: locale/programs/charmap.c:196
+msgid "illegal definition"
+msgstr ""
+
+#: locale/programs/charmap.c:349
+msgid "illegal encoding given"
+msgstr ""
+
+#: locale/programs/linereader.c:546
+msgid "illegal escape sequence at end of string"
+msgstr ""
+
+#: locale/programs/charset.c:101
+msgid "illegal names for character range"
+msgstr ""
+
#: sunrpc/rpc_parse.c:146
msgid "illegal result type"
msgstr ""
-#: catgets/gencat.c:340 gencat.c:417
+#: catgets/gencat.c:341 gencat.c:418
msgid "illegal set number"
msgstr ""
-#: time/zic.c:777
+#: locale/programs/ld-ctype.c:806
+#, c-format
+msgid "implementation limit: no more than %d character classes allowed"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:838
+#, c-format
+msgid "implementation limit: no more than %d character maps allowed"
+msgstr ""
+
+#: time/zic.c:815
msgid "input line of unknown type"
msgstr ""
-#: time/zic.c:984
+#: time/zic.c:1734
+msgid "internal error - addtype called with bad isdst"
+msgstr ""
+
+#: time/zic.c:1742
+msgid "internal error - addtype called with bad ttisgmt"
+msgstr ""
+
+#: time/zic.c:1738
+msgid "internal error - addtype called with bad ttisstd"
+msgstr ""
+
+#: locale/programs/ld-ctype.c:300
+#, c-format
+msgid "internal error in %s, line %u"
+msgstr ""
+
+#: time/zic.c:1022
msgid "invalid GMT offset"
msgstr ""
-#: time/zic.c:987
+#: time/zic.c:1025
msgid "invalid abbreviation format"
msgstr ""
-#: time/zic.c:1078 zic.c:1277 zic.c:1291
+#: time/zic.c:1115 zic.c:1314 zic.c:1328
msgid "invalid day of month"
msgstr ""
-#: time/zic.c:1236
+#: time/zic.c:1273
msgid "invalid ending year"
msgstr ""
-#: time/zic.c:1050
+#: time/zic.c:1087
msgid "invalid leaping year"
msgstr ""
-#: time/zic.c:1065 zic.c:1168
+#: time/zic.c:1102 zic.c:1205
msgid "invalid month name"
msgstr ""
-#: time/zic.c:883
+#: time/zic.c:921
msgid "invalid saved time"
msgstr ""
-#: time/zic.c:1216
+#: time/zic.c:1253
msgid "invalid starting year"
msgstr ""
-#: time/zic.c:1094 zic.c:1196
+#: time/zic.c:1131 zic.c:1233
msgid "invalid time of day"
msgstr ""
-#: time/zic.c:1282
+#: time/zic.c:1319
msgid "invalid weekday name"
msgstr ""
-#: time/zic.c:757
+#: locale/programs/ld-collate.c:1411
+msgid "line after ellipsis must contain character definition"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1390
+msgid "line before ellipsis does not contain definition for character constant"
+msgstr ""
+
+#: time/zic.c:795
msgid "line too long"
msgstr ""
-#: catgets/gencat.c:598
+#: catgets/gencat.c:599
msgid "malformed line ignored"
msgstr ""
-#: malloc/mcheck.c:168
+#: malloc/mcheck.c:183
msgid "memory clobbered before allocated block"
msgstr ""
-#: malloc/mcheck.c:171
+#: malloc/mcheck.c:186
msgid "memory clobbered past end of allocated block"
msgstr ""
-#: malloc/mcheck.c:165
+#: locale/programs/ld-collate.c:167 locale/programs/ld-collate.c:177
+#: locale/programs/ld-collate.c:1467 posix/getconf.c:174
+#: programs/ld-collate.c:173 programs/ld-collate.c:1438 programs/locfile.c:940
+#: programs/xmalloc.c:64
+msgid "memory exhausted"
+msgstr ""
+
+#: malloc/mcheck.c:180
msgid "memory is consistent, library is buggy"
msgstr ""
-#: time/zic.c:878
+#: time/zic.c:916
msgid "nameless rule"
msgstr ""
msgid "no array-of-pointer declarations -- use typedef"
msgstr ""
-#: time/zic.c:1955
+#: locale/programs/ld-messages.c:95 programs/ld-messages.c:116
+#, c-format
+msgid "no correct regular expression for field `%s' in category `%s': %s"
+msgstr ""
+
+#: time/zic.c:2060
msgid "no day in month matches rule"
msgstr ""
-#: sunrpc/portmap.c:452
+#: locale/programs/ld-collate.c:259
+msgid "no definition of `UNDEFINED'"
+msgstr ""
+
+#: locale/programs/locfile.c:479
+msgid "no other keyword shall be specified when `copy' is used"
+msgstr ""
+
+#: locale/programs/charmap.c:315 programs/charmap.c:466 programs/charmap.c:545
+msgid "no symbolic name given"
+msgstr ""
+
+#: locale/programs/charmap.c:380 programs/charmap.c:512 programs/charmap.c:578
+msgid "no symbolic name given for end of range"
+msgstr ""
+
+#: locale/programs/ld-collate.c:244
+#, c-format
+msgid "no weight defined for symbol `%s'"
+msgstr ""
+
+#: locale/programs/charmap.c:430
+msgid "only WIDTH definitions are allowed to follow the CHARMAP definition"
+msgstr ""
+
+#: sunrpc/portmap.c:451
msgid "portmap CALLIT: cannot fork.\n"
msgstr ""
-#: portmap.c:117 sunrpc/portmap.c:95
+#: portmap.c:116 sunrpc/portmap.c:94
msgid "portmap cannot bind"
msgstr ""
-#: portmap.c:113 sunrpc/portmap.c:87
+#: portmap.c:112 sunrpc/portmap.c:86
msgid "portmap cannot create socket"
msgstr ""
msgid "registerrpc: out of memory\n"
msgstr ""
-#: time/zic.c:1690
+#: time/zic.c:1795
msgid "repeated leap second moment"
msgstr ""
msgid "rpcinfo: can't contact portmapper: "
msgstr ""
-#: sunrpc/portmap.c:138
+#: sunrpc/portmap.c:137
msgid "run_svc returned unexpectedly\n"
msgstr ""
+#: time/zic.c:709 zic.c:711
+msgid "same rule name in multiple files"
+msgstr ""
+
#: inet/rcmd.c:158
msgid "select: protocol failure in circuit setup\n"
msgstr ""
msgid "socket: protocol failure in circuit setup.\n"
msgstr ""
-#: time/zic.c:742
+#: locale/programs/locfile.c:600
+msgid "sorting order `forward' and `backward' are mutually exclusive"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1567 programs/ld-collate.c:1613
+msgid ""
+"specification of sorting weight for collation symbol does not make sense"
+msgstr ""
+
+#: time/zic.c:780
msgid "standard input"
msgstr ""
-#: time/zdump.c:259
+#: time/zdump.c:260
msgid "standard output"
msgstr ""
-#: time/zic.c:1240
+#: time/zic.c:1277
msgid "starting year greater than ending year"
msgstr ""
msgid "svcudp_create: socket creation problem"
msgstr ""
-#: catgets/gencat.c:369 gencat.c:505 gencat.c:532
+#: locale/programs/ld-collate.c:1190
+#, c-format
+msgid ""
+"symbol for multicharacter collating element `%.*s' duplicates element "
+"definition"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1063
+#, c-format
+msgid ""
+"symbol for multicharacter collating element `%.*s' duplicates other element "
+"definition"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1199
+#, c-format
+msgid ""
+"symbol for multicharacter collating element `%.*s' duplicates other symbol "
+"definition"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1072
+#, c-format
+msgid ""
+"symbol for multicharacter collating element `%.*s' duplicates symbol "
+"definition"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1054 programs/ld-collate.c:1181
+#, c-format
+msgid ""
+"symbol for multicharacter collating element `%.*s' duplicates symbolic name "
+"in charset"
+msgstr ""
+
+#: locale/programs/charmap.c:314 locale/programs/charmap.c:465
+#: locale/programs/charmap.c:576 programs/charmap.c:348 programs/charmap.c:378
+#: programs/charmap.c:511 programs/charmap.c:544
+#, c-format
+msgid "syntax error in %s definition: %s"
+msgstr ""
+
+#: locale/programs/locfile.c:620
+msgid "syntax error in `order_start' directive"
+msgstr ""
+
+#: locale/programs/locfile.c:362
+msgid "syntax error in character class definition"
+msgstr ""
+
+#: locale/programs/locfile.c:420
+msgid "syntax error in character conversion definition"
+msgstr ""
+
+#: locale/programs/locfile.c:662
+msgid "syntax error in collating order definition"
+msgstr ""
+
+#: locale/programs/locfile.c:512
+msgid "syntax error in collation definition"
+msgstr ""
+
+#: locale/programs/locfile.c:335
+msgid "syntax error in definition of LC_CTYPE category"
+msgstr ""
+
+#: locale/programs/locfile.c:278
+msgid "syntax error in definition of new character class"
+msgstr ""
+
+#: locale/programs/locfile.c:288
+msgid "syntax error in definition of new character map"
+msgstr ""
+
+#: locale/programs/locfile.c:873
+msgid "syntax error in message locale definition"
+msgstr ""
+
+#: locale/programs/locfile.c:784
+msgid "syntax error in monetary locale definition"
+msgstr ""
+
+#: locale/programs/locfile.c:811
+msgid "syntax error in numeric locale definition"
+msgstr ""
+
+#: locale/programs/locfile.c:722
+msgid "syntax error in order specification"
+msgstr ""
+
+#: locale/programs/charmap.c:195 programs/charmap.c:211
+#, c-format
+msgid "syntax error in prolog: %s"
+msgstr ""
+
+#: locale/programs/locfile.c:849
+msgid "syntax error in time locale definition"
+msgstr ""
+
+#: locale/programs/locfile.c:255
+msgid "syntax error: not inside a locale definition section"
+msgstr ""
+
+#: catgets/gencat.c:370 gencat.c:506 gencat.c:533
msgid "this is the first definition"
msgstr ""
-#: time/zic.c:1083
+#: time/zic.c:1120
msgid "time before zero"
msgstr ""
-#: time/zic.c:1091 zic.c:1855 zic.c:1874
+#: time/zic.c:1128 zic.c:1960 zic.c:1979
msgid "time overflow"
msgstr ""
+#: locale/programs/charset.c:44
+msgid "too few bytes in character encoding"
+msgstr ""
+
+#: locale/programs/charset.c:46
+msgid "too many bytes in character encoding"
+msgstr ""
+
+#: locale/programs/locales.h:72
+msgid "too many character classes defined"
+msgstr ""
+
#: sunrpc/rpc_util.c:285
msgid "too many files!\n"
msgstr ""
-#: time/zic.c:1684
+#: time/zic.c:1789
msgid "too many leap seconds"
msgstr ""
-#: time/zic.c:1656
+#: time/zic.c:1761
msgid "too many local time types"
msgstr ""
-#: time/zic.c:1622
+#: time/zic.c:1715
msgid "too many transitions?!"
msgstr ""
-#: time/zic.c:1978
+#: locale/programs/ld-collate.c:1622
+msgid "too many weights"
+msgstr ""
+
+#: time/zic.c:2083
msgid "too many, or too long, time zone abbreviations"
msgstr ""
+#: locale/programs/linereader.h:146
+msgid "trailing garbage at end of line"
+msgstr ""
+
#: sunrpc/svc_simple.c:132
#, c-format
msgid "trouble replying to prog %d\n"
msgstr ""
-#: time/zic.c:1247
+#: locale/programs/ld-collate.c:1382
+msgid "two lines in a row containing `...' are not allowed"
+msgstr ""
+
+#: time/zic.c:1284
msgid "typed single year"
msgstr ""
-#: catgets/gencat.c:466
+#: locale/programs/charmap.c:617 programs/charmap.c:628
+#, c-format
+msgid "unknown character `%s'"
+msgstr ""
+
+#: locale/programs/ld-messages.c:193 locale/programs/ld-messages.c:215
+#: programs/ld-messages.c:204 programs/ld-messages.c:226
+#, c-format
+msgid "unknown character in field `%s' of category `%s'"
+msgstr ""
+
+#: locale/programs/locfile.c:585
+msgid "unknown collation directive"
+msgstr ""
+
+#: catgets/gencat.c:467
#, c-format
msgid "unknown directive `%s': line ignored"
msgstr ""
-#: catgets/gencat.c:445
+#: catgets/gencat.c:446
#, c-format
msgid "unknown set `%s'"
msgstr ""
msgid "unknown signal"
msgstr ""
-#: time/zic.c:714
+#: locale/programs/ld-collate.c:1366 locale/programs/ld-collate.c:1731
+#: programs/ld-collate.c:1557
+#, c-format
+msgid "unknown symbol `%.*s': line ignored"
+msgstr ""
+
+#: time/zic.c:752
msgid "unruly zone"
msgstr ""
-#: catgets/gencat.c:950
+#: catgets/gencat.c:951
msgid "unterminated message"
msgstr ""
+#: locale/programs/linereader.c:515 programs/linereader.c:550
+msgid "unterminated string"
+msgstr ""
+
#: sunrpc/rpc_scan.c:319
msgid "unterminated string constant"
msgstr ""
+#: locale/programs/linereader.c:385
+msgid "unterminated symbolic name"
+msgstr ""
+
+#: locale/programs/ld-collate.c:1684
+msgid "unterminated weight name"
+msgstr ""
+
+#: locale/programs/charset.c:119
+msgid "upper limit in range is not smaller then lower limit"
+msgstr ""
+
#: sunrpc/rpc_main.c:78
#, c-format
msgid "usage: %s infile\n"
msgstr ""
-#: time/zic.c:1921
+#: time/zic.c:2026
msgid "use of 2/29 in non leap-year"
msgstr ""
+#: locale/programs/charmap.c:438 programs/charmap.c:492
+#, c-format
+msgid "value for %s must be an integer"
+msgstr ""
+
+#: locale/programs/charmap.c:233
+#, c-format
+msgid "value for <%s> must lie between 1 and 4"
+msgstr ""
+
+#: locale/programs/ld-monetary.c:148 programs/ld-numeric.c:89
+#, c-format
+msgid "value for field `%s' in category `%s' must not be the empty string"
+msgstr ""
+
+#: locale/programs/charmap.c:245
+msgid "value of <mb_cur_max> must be greater than the value of <mb_cur_min>"
+msgstr ""
+
+#: locale/programs/ld-monetary.c:138
+msgid ""
+"value of field `int_curr_symbol' in category `LC_MONETARY' does not "
+"correspond to a valid name in ISO 4217"
+msgstr ""
+
+#: locale/programs/ld-monetary.c:133
+msgid ""
+"value of field `int_curr_symbol' in category `LC_MONETARY' has wrong length"
+msgstr ""
+
+#: locale/programs/ld-monetary.c:370 programs/ld-numeric.c:199
+#, c-format
+msgid "values for field `%s' in category `%s' must be smaller than 127"
+msgstr ""
+
+#: locale/programs/ld-monetary.c:366
+#, c-format
+msgid "values for field `%s' in category `%s' must not be zero"
+msgstr ""
+
#: sunrpc/rpc_parse.c:330
msgid "variable-length array declaration expected"
msgstr ""
msgid "while opening UTMP file"
msgstr ""
-#: catgets/gencat.c:977
+#: catgets/gencat.c:978
msgid "while opening old catalog file"
msgstr ""
-#: time/zic.c:1041
+#: time/zic.c:1078
msgid "wrong number of fields on Leap line"
msgstr ""
-#: time/zic.c:1132
+#: time/zic.c:1169
msgid "wrong number of fields on Link line"
msgstr ""
-#: time/zic.c:874
+#: time/zic.c:912
msgid "wrong number of fields on Rule line"
msgstr ""
-#: time/zic.c:944
+#: time/zic.c:982
msgid "wrong number of fields on Zone continuation line"
msgstr ""
-#: time/zic.c:902
+#: time/zic.c:940
msgid "wrong number of fields on Zone line"
msgstr ""
projects / external / glibc.git / commitdiff